Cities Index.
Exhibit 1 - Lease

Alameda City Council
October 17, 2023

Document
Exhibit 1 - Lease
Meeting
October 17, 2023
Body
Alameda City Council
Pages
13
Original file
40.4 MB
Text extracted from the city's file for reading and search. Open the original on legistar1.granicus.com. That file is the official record.

Exhibit A - 1
61641508.v7

EXHIBIT A

PREMISES
See attached.

DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208

WEST TOWER AVENUE

SEAPLANE (NORTH)

LEXINGTON STREET
BUILDING 11
PARCEL

MONARCH STREET
G:\1087-10\ACAD-10\EXHIBITS\CONVEYANCE DATES\PARCELIZATION\XB_BUILDING 11_CONCEPTUAL PARCEL (2023).DWG

VICINITY MAP
LAKE

MERRITT

SAN FRANCISCO
BAY

PORT OF
OAKLAND 880
980
580

WEBSTER ST
RAMP

CENTRAL
AVE

BAY BRIDGE

STARGELL
AVE
880
SITE

ALAMEDA
POINT
LEGEND

ABBREVIATIONS

WEST TOWER AVENUESEAPLANE (NORTH)

ALAMEDA POINT

CONCEPTUAL PARCEL
BUILDING 11

CITY OF ALAMEDA ALAMEDA COUNTY CALIFORNIA SCALE: 1" = 60'DATE: JULY, 2023
180120600 CIVIL ENGINEERS SURVEYORS PLANNERS

SAN RAMON
WWW.CBANDG.COM

ROSEVILLE
(925) 866-0322
(916) 788-4456

MONARCH STREET
CONCEPTUAL PARCEL NOTES:

EXHIBIT A- PREMISES
Premises
DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208 Exhibit A1 - 1
61641508.v7
EXHIBIT A-1

LAND AREA
See attached.

DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208

WEST TOWER AVENUE

SEAPLANE (NORTH)

LEXINGTON STREET
BUILDING 11
PARCEL

MONARCH STREET
G:\1087-10\ACAD-10\EXHIBITS\CONVEYANCE DATES\PARCELIZATION\XB_BUILDING 11_CONCEPTUAL PARCEL (2023).DWG

VICINITY MAP
LAKE

MERRITT

SAN FRANCISCO
BAY

PORT OF
OAKLAND 880
980
580

WEBSTER ST
RAMP

CENTRAL
AVE

BAY BRIDGE

STARGELL
AVE
880
SITE

ALAMEDA
POINT
LEGEND

ABBREVIATIONS

WEST TOWER AVENUESEAPLANE (NORTH)

ALAMEDA POINT

CONCEPTUAL PARCEL
BUILDING 11

CITY OF ALAMEDA ALAMEDA COUNTY CALIFORNIA SCALE: 1" = 60'DATE: JULY, 2023
180120600 CIVIL ENGINEERS SURVEYORS PLANNERS

SAN RAMON
WWW.CBANDG.COM

ROSEVILLE
(925) 866-0322
(916) 788-4456

MONARCH STREET
CONCEPTUAL PARCEL NOTES:

EXHIBIT A-1 - LAND AREA
DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208 Exhibit A2 - 1
61641508.v7
EXHIBIT A-2

PARKING

See attached.

DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208

WEST TOWER AVENUE

SEAPLANE (NORTH)

LEXINGTON STREET
BUILDING 11
PARCEL

MONARCH STREET
G:\1087-10\ACAD-10\EXHIBITS\CONVEYANCE DATES\PARCELIZATION\XB_BUILDING 11_CONCEPTUAL PARCEL (2023).DWG

VICINITY MAP
LAKE

MERRITT

SAN FRANCISCO
BAY

PORT OF
OAKLAND 880
980
580

WEBSTER ST
RAMP

CENTRAL
AVE

BAY BRIDGE

STARGELL
AVE
880
SITE

ALAMEDA
POINT
LEGEND

ABBREVIATIONS

WEST TOWER AVENUESEAPLANE (NORTH)

ALAMEDA POINT

CONCEPTUAL PARCEL
BUILDING 11

CITY OF ALAMEDA ALAMEDA COUNTY CALIFORNIA SCALE: 1" = 60'DATE: JULY, 2023
180120600 CIVIL ENGINEERS SURVEYORS PLANNERS

SAN RAMON
WWW.CBANDG.COM

ROSEVILLE
(925) 866-0322
(916) 788-4456

MONARCH STREET
CONCEPTUAL PARCEL NOTES:

EXHIBIT A-2 - PARKING
DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208 Exhibit A3 - 1
61641508.v7
EXHIBIT A-3

COMMON AREAS
See attached.

DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208

WEST TOWER AVENUE

SEAPLANE (NORTH)

LEXINGTON STREET
BUILDING 11
PARCEL

MONARCH STREET
G:\1087-10\ACAD-10\EXHIBITS\CONVEYANCE DATES\PARCELIZATION\XB_BUILDING 11_CONCEPTUAL PARCEL (2023).DWG

VICINITY MAP
LAKE

MERRITT

SAN FRANCISCO
BAY

PORT OF
OAKLAND 880
980
580

WEBSTER ST
RAMP

CENTRAL
AVE

BAY BRIDGE

STARGELL
AVE
880
SITE

ALAMEDA
POINT
LEGEND

ABBREVIATIONS

WEST TOWER AVENUESEAPLANE (NORTH)

ALAMEDA POINT

CONCEPTUAL PARCEL
BUILDING 11

CITY OF ALAMEDA ALAMEDA COUNTY CALIFORNIA SCALE: 1" = 60'DATE: JULY, 2023
180120600 CIVIL ENGINEERS SURVEYORS PLANNERS

SAN RAMON
WWW.CBANDG.COM

ROSEVILLE
(925) 866-0322
(916) 788-4456

MONARCH STREET
CONCEPTUAL PARCEL NOTES:

EXHIBIT A-3 - KNOWN COMMON AREAS (Not to Scale)
Fire Corridor
Common wall with Buildings 400 & 400A
DocuSign Envelope ID: 356CFEA7-6B74-4FCE-B46B-6BA92AEAB208

61641508.v7

EXHIBIT E

ENVIRONMENTAL QUESTIONNAIRE
The purpose of this form is to obtain information regarding the use, if any, of hazardous substances in the process proposed on the premises to be leased. Any such use must be approved in writing by Landlord.

Prospective tenants should answer the questions in light of their proposed operations on the premises. Existing tenants should answer the questions as they relate to ongoing operations on the premises and should update any information previously submitted. If additional space is needed to answer the questions, you may attach separate sheets of paper to this form.

Your cooperation in this matter is appreciated. Any questions should be directed to, and when completed, the form should be mailed to:

RiverRock Real Estate Group, Inc., as Agent for
City of Alameda
950 W. Mall Square, suite 239
Alameda, CA 94501
Tel: (510) 749-0304
Fax: (510) 749-1095

1. General Information.

Name of Responding Company: Science Corporation

Check the Applicable Status:

Prospective Tenant Existing Tenant
Mailing Address: 1010 Atlantic Ave Suite 100, Alameda, CA 94501

Contact Person and Title: Kylie Alsofrom, Director of Operations

Telephone Number: ( 209 ) 614-9790

Alameda Point Address of Proposed Premises to be Leased: 1190 West Tower Avenue, Building 11, Alameda, CA 94501

Length of Lease Term: 10 Years

Your Standard Industrial Classification (SIC) Code Number: 3841

Describe the proposed operations to take place on the property, including principal products manufactured, services and a brief process flow description to be conducted. Existing tenants should describe any proposed changes to ongoing operations.

Medical Device Research and Development

2 61641508.v7

Hazardous Wastes Yes No
Hazardous Chemical Products Yes No

2. Use and/or Storage of Hazardous Materials.

2.1 Will any hazardous materials be used or stored onsite?

2.2 Attach the list of any hazardous materials/wastes to be used, stored, or generated the quantities that will be onsite at any given time, and the location and method of storage (e.g., 55-gallon drums on concrete pad).

2.3 Does your company handle hazardous materials in a quantity equal to or exceeding an aggregate of 500 pounds, 55 gallons, or 200 cubic feet? Yes No

If yes please provide Material Safety Data Sheets (MSDS) on such materials.

2.4 Has your business filed for a Consolidated Hazardous Materials Permit from the Alameda County Environmental Management Department?
Yes No

If so, attach a copy of the permit application.

2.5 Are any of the chemicals used in your operations regulated under Proposition 65? Yes No
If so, describe the actions taken, or proposed to be taken, to comply with Proposition 65 requirements.

2.6 Do you store or use or intend to store or use acutely hazardous materials above threshold quantities requiring you to prepare a risk management plan (RMP)? Yes No

2.7 Describe the procedures followed to comply with OSHA Hazard Communication Standard requirements.

3. Storage Tanks and Pumps.

3.1 Are any above or below ground storage of gasoline, diesel, or other hazardous substances in tanks or pumps being used as a part of your present process or proposed for use on this leased premises?
Yes No

If yes, describe the materials to be stored, and the type, size and construction of the pump or tank. Attach copies of any permits obtained for the storage of such substances. As part of the new facility buildout we plan to add a d iesel above ground tank for a backup generator.

We also plan to install a continuous flow centralized Acid Waste treatment system for Ph Adjustment for waste X – We have an HMBP filed for our current facility. Will need to complete for new location.

X
X
We maintain a written hazard communication program at our facility which includes requirements for labels and other forms of warnings, safety data sheets (SDSs), information and training. We provide hazard communication information and training to all of our employees, as well as access to our complete hazardous chemical inventory and SDSs.

Applicable Prop 65 signage will be placed in areas where employees have potential exposure to known carcinogens or reproductive hazards. Employees are also trained in Hazard Communication and chemical safety practices to safely work with hazardous materials onsite.

X
X
3 61641508.v7

streams not containing metal Ions. System sizing and exact specification of the AWN not yet determined.

This does not exist at our current facility.

3.2 If you have an above ground storage tank (AST), do you have a spill prevention containment and countermeasures (SPCC) plan?
Yes No Not Applicable

3.3 Have any tanks, pumps or piping at your existing facilities been inspected or tested for leakage?
Yes No Not Applicable
If so, attach the results.

3.4 Have any spills or leaks occurred from such tanks, pumps or piping? Yes No Not Applicable
If so, describe.

3.5 Were any regulatory agencies notified of any spills or leaks? Yes No Not Applicable
If so, attach copies of any spill reports filed, any clearance letters or other correspondence from regulatory agencies relating to the spill or leak.

3.6 Have any underground storage tanks, sumps or piping been taken out of service or removed at the proposed facility or facilities that you operate? Yes No Not Applicable

If yes, attach copies of any closure permits and clearance obtained from regulatory agencies relating to closure and removal of such tanks.

4. Spills.

4.1 During the past year, have any spills occurred on any site you occupy? Yes No Not Applicable
If so, please describe the spill and attach the results of any process conducted to determine the extent of such spills.

4.2 Were any agencies notified in connection with such spills?

Yes No Not Applicable

If no, attach copies of any spill reports or other correspondence with regulatory agencies.

4.3 Were any clean-up actions undertaken in connection with the spills?

Yes No Not Applicable

If so, briefly describe the actions taken. Attach copies of any clearance letters obtained from any regulatory agencies involved and the results of any final soil or 4 61641508.v7

groundwater sampling done upon completion of the clean-up work

5. Waste Management.

5.1 Has your business filed a Hazardous Material Plan with the Alameda County Environmental Management Department?
Yes No

5.2 Has your company been issued an EPA Hazardous Waste Generator I.D. Number? Yes No
If yes: EPA ID#

5.3 Has your company filed a biennial report as a hazardous waste generator? Yes No
If so, attach a copy of the most recent report filed.

5.4 Are hazardous wastes stored in secondary containments? Yes No

5.5 Do you utilize subcontractors for lighting/electrical, plumbing, HVAC, pest services, landscaping and/or building maintenance services?
Yes No

If yes, do any of these subcontractors store, mix or utilize chemicals on site? Yes No
If yes, what types and quantities?

Attach the list of the hazardous waste, if any, generated or to be generated at the premises, its hazard class and the quantity generated on a monthly basis.

Describe the method(s) of disposal for each waste. Indicate where and how often disposal will take place.

Indicate the name of the person(s) responsible for maintaining copies of hazardous waste manifests completed for offsite shipments of hazardous waste.

We have a CalEPA ID number for our existing location, but will apply for a new number at our new facility address once a move is confirmed.

X
Hazardous and medical wastes are picked up by our authorized waste management vendor (Veolia) on a weekly basis and are shipped off site to an applicable waste treatment and disposal facility as determined by Veolia.

Patrick Barr
X NA
X
X
We have a CalEPA ID number for our existing location will need to apply for a new number at our new facility if a move is confirmed.

Will complete a new one if move is confirmed. We have one on file for our existing site location.
5 61641508.v7

X
Is any treatment, processing and recycling of hazardous wastes currently conducted or proposed to be conducted at the premises:

Yes No

If yes, please describe any existing or proposed treatment, processing or recycling methods. Future premises may have a continuous flow Acid waste treatment (AWN) system to be used for PH neutralization of waste water prior to disposal via sewar system.

Attach copies of any hazardous waste permits or licenses issued to your company with respect to its operations on the premises.

6. Wastewater Treatment/Discharge.

6.1 Will your proposed operation require the discharge of wastewater to (answer Yes or No to each of the following)?
storm drain Yes sewer
surface water no industrial discharge

6.2 Does your business have a Sewer Use Questionnaire on file with Alameda County Sanitation District?
Yes No

6.3 Is your wastewater treated before discharge?
Yes No Not Applicable
If yes, describe the type of treatment conducted.

6.4 Does your business conduct operations outside the building or store materials outside? Yes No Not Applicable

6.5 Do you have a Storm Water Pollution Prevention Plan (SWPPP)? Yes No Not Applicable

6.6 Does your business have a General Permit for storm water discharge associated with industrial activity?
Yes No Not Applicable

6.7 Does your business operate under a National Pollution Discharge Elimination System (NPDES) Permit?
Yes No Not Applicable

Attach copies of any wastewater discharge permits issued to your company with respect to its operations on the premises.

X
X
X – not currently on file. Will notify Sanitation district upon move and file for waste water permit if required upon review of questionnaire.

We have a CalEPA ID number for our existing location will need to apply for a new number at our new facility if a move is confirmed.

Wastes currenlty not process for drain disposal. Will update our processes if an AWN system is installed.
6 61641508.v7

Spray booth Yes No
Dip tank Yes No
Drying oven Yes No
Incinerator Yes No
Other (please describe) Yes No
Boiler Yes No
I/C Engine Yes No
Emergency Backup Generator Yes No
Processes that apply coatings, inks, Yes No

7. Air Discharges.1

7.1 Do you have or intend to have any air filtration systems or stacks that discharge into the air?
Yes No

7.2 Do you operate or plan to operate any of the following types of equipment, or any other equipment requiring an air emissions permit (answer Yes or No to each of the following)?

adhesives or use solvents

7.3 Do you emit or plan to emit any toxic air contaminates? Yes No

7.4 Are air emissions from your operations monitored?
Yes No
If so, indicate the frequency of monitoring and a description of the monitoring results.

Attach copies of any air emissions permits pertaining to your operations on the premises.

8. Enforcement Actions, Complaints.

8.1 Has your company, within the past five years, ever been subject to any agency enforcement actions, administrative orders, or consent decrees? Yes No

If so, describe the actions and any continuing compliance obligations imposed as a result of these actions.

1 NOTE: Businesses will have to comply with prohibitory rules regardless of whether they have or need a permit.

Currently monitor use of small tabletop Ethylene oxide sterilization unit exhaust and keep records of each use (below permitting requirement at present). Emergency generator will be run quarterly and fuel a as well as run time records will be kept for BAAQMD permit requirements.

Minimal solvent use at present, but we will continue to communicate with the BAAQMD upon move to determine if additional monitoring will be required at new facility.

Product Name Material Class Storage Use-Closed Systems Use-Open SystemsSolid Liquid Gas Formic Acid Flammable Liquid IC NA 500mL NA NA NA
Acetic Acid Flammable Liquid IC NA 100mL NA NA NA
Acetic Anhydride Flammable Liquid IC NA 250mL NA NA NA
Tin(II) Methansulfonate Solution Corrosive NA NA 250mL NA NA NA Detergent 8 Combustible Liquid IIIB NA 1gal NA 1L 1L
Methanol Flammable Liquid IB NA 4L NA NA NA
Xylenes Flammable Liquid IC NA 13gal NA 2gal NA
1,3-Dioxolane Flammable Liquid IA NA 1L NA NA NA
Paraformaldehyde Flammable Solid NA 500g NA NA NA NA
Mesitylene Flammable Liquid IC NA 2.5L NA NA NA
Hexamethyldisiloxane Flammable Liquid IB NA 100g NA NA NA 2,6-Di-tert-butyl-4-methylphenol Toxic NA 100g NA NA NA NA Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide Toxic NA 10g NA NA NA NA Acetone Flammable Liquid lB NA 5gal NA 2gal NA
Toluene Flammable Liquid lB NA 1gal NA 0.25gal NA
Tetrahydrofuran Flammable Liquid lB NA 1L NA NA NA
Sodium tetraborate decahydrate Toxic NA 25g NA NA NA NA Sodium iodate Oxidizer 2 125g NA NA NA NA
Sodium azide Highly Toxic NA 100g NA NA NA NA
Ethanol 200 Proof Flammable Liquid lB NA 10gal NA 2gal NA Isoflurane Toxic NA NA 1500mL NA 250mL NA
Formaldehyde Solution Flammable Liquid NA NA 450mL NA NA NA SU-8 Developer Flammable Liquid NA NA 1gal NA 0.5gal NA EBR PG Flammable Liquid lB NA 3gal NA NA NA
Sodium dodecyl sulfate Flammable Solid NA 25g NA NA NA NA Copper Etchant Oxidizer 2 NA 2gal NA NA NA
4-DODECYLBENZENESULFONIC ACID Corrosive NA NA 250mL NA NA NA SU-8 2025 Flammable Liquid lC NA 500mL NA NA NA
AZ 50XT Photoresist Flammable Liquid NA NA 1L NA NA NA
SC-40 MU Corrosive NA NA 20L NA NA NA
SPM 1200-A Corrosive NA NA 1L NA NA NA
SC Copper Sulfate Corrosive NA NA 1gal NA NA NA
AZ 300 MIF DEVELOPER Corrosive NA NA 4gal NA 1gal NA
PI2610 Combustible Liquid lllB NA 1kg NA 5g NA
Isopropyl Alcohol Flammable Liquid lB NA 8gal NA 3gal NA LOR 30C Flammable Liquid lC NA 1L NA NA NA
AZ 400K Developer Corrosive NA NA 4gal NA NA NA
Silicone oil NA NA NA 250mL NA NA NA
Sodium carbonate NA NA 500g NA NA NA NA
Taurine NA NA 100g NA NA NA NA
GUM XANTHAN Combustible Dust NA 100g NA NA NA NA
Triton(TM)X-100 Combustible Liquid lllB NA 500mL NA NA NA TWEEN(R)20 Combustible Liquid lllB NA 500mL NA NA NA
2-PROPANOL Flammable Liquid lB NA 6gal NA 0.50gal NA
Tetraethylammonium chloride Combustible Solid NA 25g NA NA NA NA 4-HYDROXYBENZOIC ACID Combustible Solid NA 100g NA NA NA NA Poly(acrylic acid, sodium salt) solution Non Combustible Liquids NA NA 100mL NA NA NA 6-Hydroxy-2-naphthoic acid Combustible Solid NA 5g NA NA NA NA Titanium(IV) butoxide Flammable Liquid NA NA 100g NA NA NA Sodium bicarbonate Non Combustible Liquids NA 250g NA NA NA NA D-(+)-Glucose Combustible Solid NA 100g NA NA NA NA
Calcium chloride dihydrate Combustible Solid NA 500g NA NA NA NA Sodium chloride Non Combustible Solid NA 500g NA NA NA NA POTASSIUM CHLORIDE Non Combustible Solid NA 500g NA NA NA NA Sodium phosphate dibasic Non Combustible Solid NA 500g NA NA NA NA Formalin solution, neutral buffered, 10% Toxic NA NA 1gal NA NA NA MINERAL OIL, WHITE, LIGHT Combustible Liquid NA NA 1L NA NA NA Sucrose Combustible Dust NA 1kg NA NA NA NA
LB Broth with agar (Miller) Combustible Solid NA 250g NA NA NA NA Urea Combustible Solid NA 500g NA NA NA NA
SU-8 2002 Flammable Liquid lC NA 500mL NA NA NA
SU-8 2005 Flammable Liquid lC NA 500mL NA NA NA
SU-8 2050 Flammable Liquid lC NA 500mL NA NA NA
Calcium sulfate Non Combustible Solid NA 100g NA NA NA NA Calcium chloride hexahydrate Non Combustible Solid NA 1kg NA NA NA NA 2-Hydroxy-4-(2-hydroxyethoxy)-2-methylpropiophenone Combustible Solid NA 1g NA NA NA NA SU-8 2010 Flammable Liquid lC NA 500mL NA NA NA
PhotoGel-RUT, Methacrylated Gelatin Hydrogel Kit Non Combustible Solid NA 1g NA NA NA NA Sodium Persulfate Oxidizer 3 500mg NA NA NA NA
Pentamethylcyclopentadienylbis(triphenylphosphine)ruthenium(II) chloride Oxidizer 3 100mg NA NA NA NA Molecular Probes Gelatin From Pig Skin, Fluorescein Conjugate Gelatin, Conjugated 5mg NA NA 5mg NA NA NA NA METHACRYLIC ACID N-HYDROXYSUCCINIMIDE Toxic NA 1g NA NA NA NA N,N,N,N-Tetramethylethylenediamine Flammable Liquid lB NA 25mL NA NA NA 2-Hydroxyethyl methacrylate Combustible Solid NA 100g NA NA NA NA ACRYLAMIDE Toxic NA 100g NA NA NA NA
N-Acryloxysuccinimide Corrosive NA 5g NA NA NA NA
2-(N-morpholino)ethanesulfonic acid (MES) hydrate Non Combustible Solid NA 25g NA NA NA NA BENZOPHENONE Toxic NA 1kg NA NA NA NA
N, N',-Methylenebisacrylamide Toxic NA 25g NA NA NA NA
Ammonium persulfate Oxidizer 3 100g NA NA NA NA
Methacrylic Anhydride Combustible Solid NA 100g NA NA NA NA N-Hydroxysulfosuccinimide Sodium Salt Corrosive NA 1g NA NA NA NA FLUORESCEIN 5(6)-ISOTHIOCYANATE Combustible Solid NA 50mg NA NA NA NA COLLAGENASE TYPE I Combustible Solid NA 500mg NA NA NA NA alpha-Ketoglutaric acid Combustible Solid NA 5g NA NA NA NA SODIUM ALGINATE Combustible Solid NA 100g NA NA NA NA
N6,2 -O-Dibutyryladenosine 3 ,5 -cyclic monophosphate sodium salt Combustible Solid NA 100mg NA NA NA NA Nicotinamide Combustible Solid NA 100g NA NA NA NA
DOXYCYCLINE HYCLATE Combustible Solid NA 10g NA NA NA NA HEXAMETHYLENEDIAMINE Corrosive NA 25g NA NA NA NA
Hexanes Flammable Liquid lB NA 1L NA NA NA
HCL ACID SOL CONC 10N Corrosive NA NA 300mL NA NA NA
Chromium etchant Oxidizer 3 NA 1L NA NA NA
Trypsin inhibitor fromGlycine max(soybean) NA NA 25mg NA NA NA NA 3-(Trimethoxysilyl)propyl methacrylate Combustible Liquid lllA NA 500mL NA NA NA (3-Glycidyloxypropyl)trimethoxysilane Combustible Liquid lllB NA 100mL NA NA NA Hexamethyldisilazane Flammable Liquid lB NA 25mL NA NA NA Cyclopentanone Flammable Liquid lC NA 500mL NA NA NA
3-Aminopropyltriethoxysilane Corrosive NA NA 100g NA NA NA Trichlorosilane, 50G Flammable Liquid NA NA 10g NA NA NA HEXAMETHYLENE DIISOCYANATE Highly Toxic NA NA 25mL NA NA NA Ethyl acetate Flammable Liquid lB NA 1L NA NA NA
AZ 5214-E IR PHOTORESIST Combustible Liquid ll NA 1L NA NA NA AZ 3330-F Photoresist Combustible Liquid ll NA 1L NA NA NA LOR 10C Flammable Liquid lC NA 1L NA NA NA
LOR 20C Flammable Liquid lC NA 1L NA NA NA
SU-8 2075 Flammable Liquid lC NA 500mL NA NA NA
OmniCoat Flammable Liquid lC NA 500mL NA NA NA
495 PMMA A 6 Combustible Liquid ll NA 500mL NA NA NA
OrmoComp Combustible Liquid ll NA 88mL NA NA NA
OrmoClear FX Combustible Liquid ll NA 88mL NA NA NA
AZ 10XT Photoresist (520 cP) Combustible Liquid ll NA 1L NA NA NA PA401D Combustible Liquid ll NA 1gal NA NA NA
PA400R Combustible Liquid ll NA 1gal NA NA NA
Tetramethylammonium hydroxide solution Highly Toxic NA NA 1L NA NA NA Potassium hydroxide Corrosive NA 2.5kg NA NA NA NA
Diisopropylamine Flammable Liquid lB NA 1L NA NA NA
24K Pure Gold Bath Solution Toxic NA NA 2L NA NA NA
Nickel Etchant TFB Corrosive NA NA 32floz NA NA NA
Gold Etchant Corrosive NA NA 32floz NA NA NA
Hydrofluoric acid Highly Toxic NA NA 500mL NA NA NA
NITRIC ACID Oxidizer 3 NA 500mL NA NA NA
Triethylamine Flammable Liquid lB NA 1L NA NA NA
AZ EBR 70/30 Flammable Liquid lC NA 1gal NA 1gal NA
OrmoDev Flammable Liquid lB NA 1L NA NA NA
AZ 400T Stripper Combustible Liquid lllB NA 4gal NA NA NA Remover PG Toxic NA NA 4gal NA 1gal NA
HYDROCHLORIC ACID 0.37 A.C.S. Corrosive NA NA 500mL NA NA NA 2-METHYLBUTANE Flammable Liquid lA NA 1gal NA NA NA
HYDROGEN PEROXIDE Oxidizer NA NA 500mL NA NA NA
HD3007 Combustible Liquid lllA NA 1kg NA NA NA
HD8820 Combustible Liquid lllA NA 1kg NA 50g NA
KMPR 1035 Flammable Liquid lC NA 500mL NA NA NA
KMPR 1010 Flammable Liquid lC NA 500mL NA NA NA
PI2611 Combustible Liquid lllB NA 1kg NA 100g NA
PI2574 Combustible Liquid lllB NA 1kg NA NA NA
HD4100 Toxic NA NA 1kg NA NA NA
Ultra High Purity Grade Helium Inert Gas Gaseous NA NA 80CF 80CF NA Medical NF (National Formulary) Grade Nitrogen Inert Gas Gaseous NA NA 400CF 200CF NA Industrial Grade Nitrogen Inert Gas Liquid NA NA 460L 230L NA USP Medical Grade Carbon Dioxide Oxidizing Gas Gaseous NA NA 100lbs 50lbs NA USP Medical Grade Oxygen Oxidizing Gas Gaseous NA NA 35lbs 7lbs NA Ultra High Purity Grade Argon Inert Gas Gaseous NA NA 250CF 250CF NA Industrial Grade Oxygen Oxidizing Gas Gaseous NA NA 500CF NA NA Ultra High Purity Grade Nitrogen Inert Gas Gaseous NA NA 600CF 600CF NA Ultra High Purity Grade Oxygen Oxidizing Gas Gaseous NA NA 600CF 300CF NA Industrial Grade Liquid Nitrogen Inert Gas Liquid NA NA 460L 230L NA All hazardous materials are stored in secured chemical cabinets compatible with the type of hazardous material.

Carbon Dioxide
Carbonic, Carbon Dioxide, Carbonic Anhydride, R744, Carbon Dioxide USP Gas.

SAFETY DATA SHEET
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
:

Chemical name : Carbon Dioxide
Supplier's details :

Carbon Dioxide
Product use : Synthetic/Analytical chemistry.

Synonym : Carbonic, Carbon Dioxide, Carbonic Anhydride, R744, Carbon Dioxide USP SDS # : 001013
:24-hour telephone
Airgas USA, LLC and its affiliates
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
1-866-734-3438
Section 2. Hazards identification
GASES UNDER PRESSURE - Liquefied gasClassification of the substance or mixture
:

Signal word : Warning
Hazard statements : Contains gas under pressure; may explode if heated.

Hazard pictograms :

Precautionary statements
Prevention : Not applicable.

Response : Not applicable.

Storage : Protect from sunlight. Store in a well-ventilated place.

Disposal : Not applicable.

GHS label elements
General :

Hazards not otherwise
classified
:

OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

May displace oxygen and cause rapid suffocation.

May increase respiration and heart rate.

Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use.

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use.

Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction. Always keep container in upright position.

In addition to any other important health or physical hazards, this product may displace oxygen and cause rapid suffocation.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 1/11 Carbon Dioxide
Section 3. Composition/information on ingredients
Carbon Dioxide 100 124-38-9
Ingredient name CAS number%
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Chemical name : Carbon Dioxide
Other means of
identification
: Carbonic, Carbon Dioxide, Carbonic Anhydride, R744, Carbon Dioxide USP CAS number : 124-38-9
Substance/mixture
CAS number/other identifiers
:

Occupational exposure limits, if available, are listed in Section 8.

Substance
Any concentration shown as a range is to protect confidentiality or is due to batch variation.

Product code : 001013
As this product is a gas, refer to the inhalation section.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Description of necessary first aid measures
Specific treatments : No specific treatment.

Most important symptoms/effects, acute and delayed
Inhalation : No known significant effects or critical hazards.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : No known significant effects or critical hazards.

No known significant effects or critical hazards.:Eye contact Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Eye contact : No specific data.

Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary Frostbite : Try to warm up the frozen tissues and seek medical attention.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 2/11 Carbon Dioxide
Section 4. First aid measures
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

See toxicological information (Section 11)
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Contact supplier immediately for specialist advice. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Contains gas under pressure. In a fire or if heated, a pressure increase will occur and the container may burst or explode.

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective
equipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media
:
:
:

None known.

Suitable extinguishing
media
:

Unsuitable extinguishing
media
:

Special protective actions
for fire-fighters
:

Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures Immediately contact emergency personnel. Stop leak if without risk. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. :
: No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Avoid breathing gas. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

Ensure emergency procedures to deal with accidental gas releases are in place to avoid contamination of the environment. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Large spill :

Immediately contact emergency personnel. Stop leak if without risk.Small spill :

Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non- emergency personnel".

Section 7. Handling and storage
Protective measures Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Avoid breathing gas. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty.

Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement.

Avoid contact with eyes, skin and clothing. Empty containers retain product residue and can be hazardous.
:

Precautions for safe handling
Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 3/11 Carbon Dioxide
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store in a segregated and approved area.

Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over.

Cylinder temperatures should not exceed 52 °C (125 °F). Keep container tightly closed and sealed until ready for use. See Section 10 for incompatible materials before handling or use.
:
:

Carbon Dioxide ACGIH TLV (United States, 1/2021). Oxygen Depletion [Asphyxiant].

STEL: 54000 mg/m³ 15 minutes.

STEL: 30000 ppm 15 minutes.

TWA: 9000 mg/m³ 8 hours.

TWA: 5000 ppm 8 hours.

NIOSH REL (United States, 10/2020).

STEL: 54000 mg/m³ 15 minutes.

STEL: 30000 ppm 15 minutes.

TWA: 9000 mg/m³ 10 hours.

TWA: 5000 ppm 10 hours.

OSHA PEL (United States, 5/2018).

TWA: 9000 mg/m³ 8 hours.

TWA: 5000 ppm 8 hours.

OSHA PEL 1989 (United States, 3/1989).

STEL: 54000 mg/m³ 15 minutes.

STEL: 30000 ppm 15 minutes.

TWA: 18000 mg/m³ 8 hours.

TWA: 10000 ppm 8 hours.

Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side- shields.

Eye/face protection :

Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering
controls
: Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 4/11 Carbon Dioxide
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.

Respiratory protection :
:

Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
:

Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Gas. [Compressed gas.]
Sublimation temperature: -79°C (-110.2 to °F)
Not applicable.

Not available.

Odorless.Odor
pH
Colorless.Color
Evaporation rate Not available.

Auto-ignition temperature
Flash point
Not available.
[Product does not sustain combustion.]

0.83 Not applicable.

Not available.Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:

Appearance
Boiling point : Not available.

Flammability (solid, gas) : Not available.

Lower and upper explosive
(flammable) limits
: Not available.

Decomposition temperature : Not available.

Solubility in water : Not available.
: 44.01 g/moleMolecular weight
Flow time (ISO 2431) : Not available.

Vapor pressure
Vapor density 1.5 (Air = 1)
830 (psig):
:

Specific Volume (ft 3/lb) : 8.7719
Gas Density (lb/ft 3) : 0.114
Critical temperature : 30.85°C (87.5°F)
Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 5/11 Carbon Dioxide
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid No specific data.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

The product is stable.Chemical stability
No specific data.
:
:
:

Incompatible materials :

Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Under normal conditions of storage and use, hazardous polymerization will not occur.Hazardous polymerization :

Section 11. Toxicological information
Acute toxicity
Not available.

Carcinogenicity
Not available.

Mutagenicity
Not available.

Teratogenicity
Not available.

Reproductive toxicity
Not available.

Irritation/Corrosion
Not available.

Sensitization
Not available.

Information on the likely
routes of exposure
Inhalation : No known significant effects or critical hazards.

Skin contact : No known significant effects or critical hazards.

No known significant effects or critical hazards.:Eye contact Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.

Not available.

Aspiration hazard
Not available.

Information on toxicological effects
: Not available.

Potential acute health effects
Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 6/11 Carbon Dioxide
Section 11. Toxicological information
Not available.

As this product is a gas, refer to the inhalation section.:Ingestion No known significant effects or critical hazards.General :

No known significant effects or critical hazards.Carcinogenicity :

No known significant effects or critical hazards.Mutagenicity :

No known significant effects or critical hazards.Teratogenicity :

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Eye contact : No specific data.

Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure Numerical measures of toxicity
Not available.

Acute toxicity estimates
Potential immediate
effects
: Not available.

Short term exposure
Potential delayed effects : Not available.

Potential immediate
effects
: Not available.

Long term exposure
Potential delayed effects : Not available.

Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects : No known significant effects or critical hazards.

Product/ingredient name
Carbon Dioxide 0.83 - low
Toxicity
Not available.

Persistence and degradability
Soil/water partition
coefficient (KOC)
: Not available.

Mobility in soil
Not available.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 7/11 Carbon Dioxide
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.

Empty pressure vessels should be returned to the supplier. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Do not puncture or incinerate container.
:Disposal methods
Section 14. Transport information
CARBON

DIOXIDE

2.2 -
CARBON

DIOXIDE

2.2 -
CARBON

DIOXIDE
UN1013

2.2 -
UN1013 UN1013
Limited quantity Yes.

Quantity limitation Passenger aircraft/rail: 75 kg. Cargo aircraft: 150 kg.

Quantity limitation Passenger and Cargo Aircraft: 75 kg. Cargo Aircraft Only: 150 kg.

DOT IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to IMO instruments
No. No. No.

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
: Not available.
:

TDG
UN1013
CARBON

DIOXIDE

2.2 -
No.

Product classified as per the following sections of the Transportation of Dangerous Goods Regulations: 2.13-2.17 (Class 2).

Explosive Limit and Limited Quantity Index 0.125
Passenger Carrying Road or Rail Index 75
Mexico
UN1013
CARBON

DIOXIDE

2.2 -
No.

DOT Classification
TDG Classification
IATA
:
:
:
“Refer to CFR 49 (or authority having jurisdiction) to determine the information required for shipment of the product.”
Section 15. Regulatory information
U.S. Federal regulations :

Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
TSCA 8(a) CDR Exempt/Partial exemption: This material is listed or exempted.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 8/11 Carbon Dioxide
Section 15. Regulatory information
This material is listed.

This product does not require a Safe Harbor warning under California Prop. 65.

Massachusetts :

California Prop. 65
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
New York : This material is not listed.

New Jersey : This material is listed.

Pennsylvania : This material is listed.

State regulations
SARA 302/304
SARA 304 RQ : Not applicable.

No products were found.

Composition/information on ingredients
SARA 311/312
Classification : Refer to Section 2: Hazards Identification of this SDS for classification of substance.

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals Montreal Protocol
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Not listed.

Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.

Inventory list
Australia : This material is listed or exempted.

Canada : This material is listed or exempted.

China : This material is listed or exempted.

Europe : This material is listed or exempted.

Japan : Japan inventory (CSCL): This material is listed or exempted.

Japan inventory (ISHL): This material is listed or exempted.

Republic of Korea : This material is listed or exempted.

New Zealand : This material is listed or exempted.

Philippines : This material is listed or exempted.

Taiwan : This material is listed or exempted.

Turkey : This material is listed or exempted.

United States : This material is active or exempted.

Thailand : This material is listed or exempted.

Viet Nam : This material is listed or exempted.

Not listed.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 9/11 Carbon Dioxide
Section 16. Other information
3/18/2022
History
Date of printing
Date of issue/Date of
revision
Version
Notice to reader
Date of previous issue
:
:
:
:

References : Not available.

Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations
3/18/2022
1/18/2022

3.01 Hazardous Material Information System (U.S.A.)
1 0
3 0
0 2
/
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service mark of the American Coatings Association, Inc.

The customer is responsible for determining the PPE code for this material. For more information on HMIS® Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.

Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.

Procedure used to derive the classification
Classification Justification
GASES UNDER PRESSURE - Liquefied gas Expert judgment
Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 10/11 Carbon Dioxide
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Date of issue/Date of revision : 3/18/2022 Date of previous issue : 1/18/2022 Version : 3.01 11/11 Argon

ARGON, COMPRESSED
Gas.

SAFETY DATA SHEET
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
:

Chemical name : argon
Supplier's details :

Argon
Product use : Synthetic/Analytical chemistry.

Synonym : ARGON, COMPRESSED
SDS # : 001004
:24-hour telephone
Airgas USA, LLC and its affiliates
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
1-866-734-3438
Section 2. Hazards identification
GASES UNDER PRESSURE - Compressed gas

SIMPLE ASPHYXIANTS
Classification of the
substance or mixture
:

Signal word : Warning
Hazard statements : Contains gas under pressure; may explode if heated.

May displace oxygen and cause rapid suffocation.

Hazard pictograms :

Precautionary statements
Prevention : Not applicable.

Response : Not applicable.

Storage : Protect from sunlight. Store in a well-ventilated place.

Disposal : Not applicable.

GHS label elements
General :

Supplemental label
elements
: Keep container tightly closed. Use only with adequate ventilation. Do not enter storage areas and confined spaces unless adequately ventilated.

Hazards not otherwise
classified
:

OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

May displace oxygen and cause rapid suffocation.

Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use.

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use.

Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction.

In addition to any other important health or physical hazards, this product may displace oxygen and cause rapid suffocation.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 1/11 Argon
Section 3. Composition/information on ingredients
Argon 100 7440-37-1
Ingredient name CAS number%
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Chemical name : argon
Other means of
identification
: ARGON, COMPRESSED
CAS number : 7440-37-1
Substance/mixture
CAS number/other identifiers
:

Occupational exposure limits, if available, are listed in Section 8.

Substance
Any concentration shown as a range is to protect confidentiality or is due to batch variation.

Product code : 001004
As this product is a gas, refer to the inhalation section.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Description of necessary first aid measures
Specific treatments : No specific treatment.

Most important symptoms/effects, acute and delayed
Inhalation : At very high concentrations, can displace the normal air and cause suffocation from lack of oxygen.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Eye contact : No specific data.

Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary Frostbite : Try to warm up the frozen tissues and seek medical attention.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 2/11 Argon
Section 4. First aid measures
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

See toxicological information (Section 11)
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Contact supplier immediately for specialist advice. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
No specific data.

Contains gas under pressure. In a fire or if heated, a pressure increase will occur and the container may burst or explode.

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective
equipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media
:
:
:

None known.

Suitable extinguishing
media
:

Unsuitable extinguishing
media
:

Special protective actions
for fire-fighters
:

Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures Immediately contact emergency personnel. Stop leak if without risk. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. :
: No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Avoid breathing gas. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

Ensure emergency procedures to deal with accidental gas releases are in place to avoid contamination of the environment. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Large spill :

Immediately contact emergency personnel. Stop leak if without risk.Small spill :

Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non- emergency personnel".

Section 7. Handling and storage
Precautions for safe handling
Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 3/11 Argon
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store in a segregated and approved area.

Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over.

Cylinder temperatures should not exceed 52 °C (125 °F). Keep container tightly closed and sealed until ready for use. See Section 10 for incompatible materials before handling or use.
:
:

Protective measures Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Avoid breathing gas. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty.

Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement.

Avoid contact with eyes, skin and clothing. Empty containers retain product residue and can be hazardous.
:

Argon ACGIH TLV (United States, 1/2021). Oxygen
Depletion [Asphyxiant].

Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side- shields.

Eye/face protection
:
:

Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering
controls
: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 4/11 Argon
Section 8. Exposure controls/personal protection
The gas can cause asphyxiation without warning by replacing the oxygen in the air.

Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. If operating conditions cause high gas concentrations to be produced or any recommended or statutory exposure limit is exceeded, use an air-fed respirator or self-contained breathing apparatus. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Respiratory protection :

Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
:

Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Gas. [COLORLESS, ODORLESS INERT GAS]
-189.2°C (-308.6°F)
Not applicable.

Not available.

Odorless.Odor
pH
Colorless.Color
Evaporation rate Not available.

Auto-ignition temperature
Flash point
Not available.
[Product does not sustain combustion.]

0.74 Not applicable.

Not available.Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:

Appearance
Boiling point : -185.9°C (-302.6°F)
Flammability (solid, gas) : Not available.

Lower and upper explosive
(flammable) limits
: Not available.

Decomposition temperature : Not available.

Solubility in water : Not available.
: 39.95 g/moleMolecular weight
Flow time (ISO 2431) : Not available.

Vapor pressure
Vapor density 1.66 (Air = 1)
Not available.:
:

Specific Volume (ft 3/lb) : 9.7087
Gas Density (lb/ft 3) : 0.103
Critical temperature : -122.4°C (-188.3°F)
Section 10. Stability and reactivity
The product is stable.Chemical stability :

Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 5/11 Argon
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid Do not allow gas to accumulate in low or confined areas.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

No specific data.
:
:

Incompatible materials :

Under normal conditions of storage and use, hazardous polymerization will not occur.Hazardous polymerization :

Section 11. Toxicological information
Acute toxicity
Not available.

Carcinogenicity
Not available.

Mutagenicity
Not available.

Teratogenicity
Not available.

Reproductive toxicity
Not available.

Irritation/Corrosion
Not available.

Sensitization
Not available.

Information on the likely
routes of exposure
Inhalation : At very high concentrations, can displace the normal air and cause suffocation from lack of oxygen.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Symptoms related to the physical, chemical and toxicological characteristics Skin contact
Inhalation No specific data.

No specific data.
:
:

Eye contact : No specific data.

Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.

Not available.

Aspiration hazard
Not available.

Information on toxicological effects
: Not available.

Potential acute health effects
Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 6/11 Argon
Section 11. Toxicological information
Not available.

No known significant effects or critical hazards.General :

No known significant effects or critical hazards.Carcinogenicity :

No known significant effects or critical hazards.Mutagenicity :

No known significant effects or critical hazards.Teratogenicity :

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.

Ingestion No specific data.:

Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure Numerical measures of toxicity
Not available.

Acute toxicity estimates
Potential immediate
effects
: Not available.

Short term exposure
Potential delayed effects : Not available.

Potential immediate
effects
: Not available.

Long term exposure
Potential delayed effects : Not available.

Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects : No known significant effects or critical hazards.

Product/ingredient name
Argon 0.74 - low
Toxicity
Not available.

Persistence and degradability
Soil/water partition
coefficient (KOC)
: Not available.

Mobility in soil
Not available.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 7/11 Argon
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.

Empty pressure vessels should be returned to the supplier. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Do not puncture or incinerate container.
:Disposal methods
Section 14. Transport information
ARGON,

COMPRESSED

2.2 -
ARGON,

COMPRESSED

2.2 -
ARGON,

COMPRESSED
UN1006

2.2 -
UN1006 UN1006
Limited quantity Yes.

Quantity limitation Passenger and Cargo Aircraft: Forbidden.

DOT IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to IMO instruments
No. No. No.

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
: Not available.
:

TDG
UN1006
ARGON,

COMPRESSED

2.2 -
No.

Product classified as per the following sections of the Transportation of Dangerous Goods Regulations: 2.13-2.17 (Class 2).

Explosive Limit and Limited Quantity Index 0.125
Passenger Carrying Road or Rail Index 75
Special provisions 42
Mexico
UN1006
ARGON,

COMPRESSED

2.2 -
No.

DOT Classification
TDG Classification
IATA
:
:
:
“Refer to CFR 49 (or authority having jurisdiction) to determine the information required for shipment of the product.”
Section 15. Regulatory information
U.S. Federal regulations :

Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
TSCA 8(a) CDR Exempt/Partial exemption: This material is listed or exempted.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 8/11 Argon
Section 15. Regulatory information
This material is listed.

This product does not require a Safe Harbor warning under California Prop. 65.

Massachusetts :

California Prop. 65
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
New York : This material is not listed.

New Jersey : This material is listed.

Pennsylvania : This material is listed.

State regulations
SARA 302/304
SARA 304 RQ : Not applicable.

No products were found.

Composition/information on ingredients
SARA 311/312
Classification : Refer to Section 2: Hazards Identification of this SDS for classification of substance.

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals Montreal Protocol
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Not listed.

Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.

Inventory list
Australia : This material is listed or exempted.

Canada : This material is listed or exempted.

China : This material is listed or exempted.

Europe : This material is listed or exempted.

Japan : Japan inventory (CSCL): Not determined.

Japan inventory (ISHL): Not determined.

Republic of Korea : This material is listed or exempted.

New Zealand : This material is listed or exempted.

Philippines : This material is listed or exempted.

Taiwan : This material is listed or exempted.

Turkey : Not determined.

United States : This material is active or exempted.

Thailand : This material is listed or exempted.

Viet Nam : This material is listed or exempted.

Not listed.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 9/11 Argon
Section 16. Other information
5/3/2022
History
Date of printing
Date of issue/Date of
revision
Version
Notice to reader
Date of previous issue
:
:
:
:

References : Not available.

Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations
12/28/2021
12/27/2021
4 Hazardous Material Information System (U.S.A.)
0 0
3 0
0 0
/
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service mark of the American Coatings Association, Inc.

The customer is responsible for determining the PPE code for this material. For more information on HMIS® Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.

Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.

Procedure used to derive the classification
Classification Justification
GASES UNDER PRESSURE - Compressed gas Expert judgment
SIMPLE ASPHYXIANTS Expert judgment
SA
Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 10/11 Argon
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Date of issue/Date of revision : 12/28/2021 Date of previous issue : 12/27/2021 Version : 4 11/11 Nitrogen
nitrogen (dot); nitrogen gas; Nitrogen NF, Nitrogen FG
Gas.

SAFETY DATA SHEET
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
:

Chemical name : nitrogen
Supplier's details :

Nitrogen
Product use : Synthetic/Analytical chemistry.

Synonym : nitrogen (dot); nitrogen gas; Nitrogen NF, Nitrogen FG SDS # : 001040
:24-hour telephone
Airgas USA, LLC and its affiliates
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
1-866-734-3438
Section 2. Hazards identification
GASES UNDER PRESSURE - Compressed gas

SIMPLE ASPHYXIANTS
Classification of the
substance or mixture
:

Signal word : Warning
Hazard statements : Contains gas under pressure; may explode if heated.

May displace oxygen and cause rapid suffocation.

Hazard pictograms :

Precautionary statements
Prevention : Not applicable.

Response : Not applicable.

Storage : Protect from sunlight. Store in a well-ventilated place.

Disposal : Not applicable.

GHS label elements
General :

Supplemental label
elements
: Keep container tightly closed. Use only with adequate ventilation. Do not enter storage areas and confined spaces unless adequately ventilated.

Hazards not otherwise
classified
:

OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

May displace oxygen and cause rapid suffocation.

Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use.

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use.

Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction.

In addition to any other important health or physical hazards, this product may displace oxygen and cause rapid suffocation.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 1/11 Nitrogen
Section 3. Composition/information on ingredients
Nitrogen 100 7727-37-9
Ingredient name CAS number%
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Chemical name : nitrogen
Other means of
identification
: nitrogen (dot); nitrogen gas; Nitrogen NF, Nitrogen FG CAS number : 7727-37-9
Substance/mixture
CAS number/other identifiers
:

Occupational exposure limits, if available, are listed in Section 8.

Substance
Any concentration shown as a range is to protect confidentiality or is due to batch variation.

Product code : 001040
As this product is a gas, refer to the inhalation section.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.

Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:

Description of necessary first aid measures
Most important symptoms/effects, acute and delayed
Inhalation : At very high concentrations, can displace the normal air and cause suffocation from lack of oxygen.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Eye contact : No specific data.

Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary Frostbite : Try to warm up the frozen tissues and seek medical attention.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 2/11 Nitrogen
Section 4. First aid measures
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.

The exposed person may need to be kept under medical surveillance for 48 hours.

Specific treatments : No specific treatment.

See toxicological information (Section 11)
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Contact supplier immediately for specialist advice. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
nitrogen oxides
Contains gas under pressure. In a fire or if heated, a pressure increase will occur and the container may burst or explode.

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective
equipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media
:
:
:

None known.

Suitable extinguishing
media
:

Unsuitable extinguishing
media
:

Special protective actions
for fire-fighters
:

Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures Immediately contact emergency personnel. Stop leak if without risk. Note: see Section 1 for emergency contact information and Section 13 for waste disposal. :
: No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Avoid breathing gas. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

Ensure emergency procedures to deal with accidental gas releases are in place to avoid contamination of the environment. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Large spill :

Immediately contact emergency personnel. Stop leak if without risk.Small spill :

Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non- emergency personnel".

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 3/11 Nitrogen
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store in a segregated and approved area.

Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over.

Cylinder temperatures should not exceed 52 °C (125 °F). Keep container tightly closed and sealed until ready for use. See Section 10 for incompatible materials before handling or use.
:
:

Protective measures Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Avoid breathing gas. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty.

Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement.

Avoid contact with eyes, skin and clothing. Empty containers retain product residue and can be hazardous.
:

Precautions for safe handling
Nitrogen ACGIH TLV (United States, 1/2021). Oxygen
Depletion [Asphyxiant].

Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side- shields.

Eye/face protection
:
:

Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering
controls
: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 4/11 Nitrogen
Section 8. Exposure controls/personal protection
The gas can cause asphyxiation without warning by replacing the oxygen in the air.

Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. If operating conditions cause high gas concentrations to be produced or any recommended or statutory exposure limit is exceeded, use an air-fed respirator or self-contained breathing apparatus. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Respiratory protection :

Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
:

Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Gas. [Compressed gas.]
-210.01°C (-346°F)
Not applicable.

Not available.

Odorless.Odor
pH
Colorless.Color
Evaporation rate Not available.

Auto-ignition temperature
Flash point
Not available.
[Product does not sustain combustion.]

0.67 Not applicable.

Not available.Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:

Appearance
Boiling point : -196°C (-320.8°F)
Flammability (solid, gas) : Not available.

Lower and upper explosive
(flammable) limits
: Not available.

Decomposition temperature : Not available.

Solubility in water : Not available.
: 28.02 g/moleMolecular weight
Flow time (ISO 2431) : Not available.

Vapor pressure
Vapor density 0.97 (Air = 1)
Not available.:
:

Specific Volume (ft 3/lb) : 13.8889
Gas Density (lb/ft 3) : 0.072
Critical temperature : -146.95°C (-232.5°F)
Section 10. Stability and reactivity
The product is stable.Chemical stability :

Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 5/11 Nitrogen
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid Do not allow gas to accumulate in low or confined areas.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

No specific data.
:
:

Incompatible materials :

Under normal conditions of storage and use, hazardous polymerization will not occur.Hazardous polymerization :

Section 11. Toxicological information
Acute toxicity
Not available.

Carcinogenicity
Not available.

Mutagenicity
Not available.

Teratogenicity
Not available.

Reproductive toxicity
Not available.

Irritation/Corrosion
Not available.

Sensitization
Not available.

Information on the likely
routes of exposure
Inhalation : At very high concentrations, can displace the normal air and cause suffocation from lack of oxygen.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Symptoms related to the physical, chemical and toxicological characteristics Inhalation No specific data.:

Eye contact : No specific data.

Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.

Not available.

Aspiration hazard
Not available.

Information on toxicological effects
: Not available.

Potential acute health effects
Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 6/11 Nitrogen
Section 11. Toxicological information
Not available.

No known significant effects or critical hazards.General :

No known significant effects or critical hazards.Carcinogenicity :

No known significant effects or critical hazards.Mutagenicity :

No known significant effects or critical hazards.Teratogenicity :

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.

Skin contact
Ingestion No specific data.

No specific data.
:
:

Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure Numerical measures of toxicity
Not available.

Acute toxicity estimates
Potential immediate
effects
: Not available.

Short term exposure
Potential delayed effects : Not available.

Potential immediate
effects
: Not available.

Long term exposure
Potential delayed effects : Not available.

Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects : No known significant effects or critical hazards.

Product/ingredient name
Nitrogen 0.67 - low
Toxicity
Not available.

Persistence and degradability
Soil/water partition
coefficient (KOC)
: Not available.

Mobility in soil
Not available.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 7/11 Nitrogen
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.

Empty pressure vessels should be returned to the supplier. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Do not puncture or incinerate container.
:Disposal methods
Section 14. Transport information

NITROGEN,

COMPRESSED

2.2 -

NITROGEN,

COMPRESSED

2.2 -

NITROGEN,

COMPRESSED
UN1066

2.2 -
UN1066 UN1066
Limited quantity Yes.

Quantity limitation Passenger aircraft/rail: 75 kg. Cargo aircraft: 150 kg.

Quantity limitation Passenger and Cargo Aircraft: 75 kg. Cargo Aircraft Only: 150 kg.

DOT IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to IMO instruments
No. No. No.

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
: Not available.
:

TDG
UN1066

NITROGEN,

COMPRESSED

2.2 -
No.

Product classified as per the following sections of the Transportation of Dangerous Goods Regulations: 2.13-2.17 (Class 2).

Explosive Limit and Limited Quantity Index 0.125
Passenger Carrying Road or Rail Index 75
Mexico
UN1066

NITROGEN,

COMPRESSED

2.2 -
No.

DOT Classification
TDG Classification
IATA
:
:
:
“Refer to CFR 49 (or authority having jurisdiction) to determine the information required for shipment of the product.”
Section 15. Regulatory information
U.S. Federal regulations :

Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
TSCA 8(a) CDR Exempt/Partial exemption: This material is listed or exempted.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 8/11 Nitrogen
Section 15. Regulatory information
This material is listed.

This product does not require a Safe Harbor warning under California Prop. 65.

Massachusetts :

California Prop. 65
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
New York : This material is not listed.

New Jersey : This material is listed.

Pennsylvania : This material is listed.

State regulations
SARA 302/304
SARA 304 RQ : Not applicable.

No products were found.

Composition/information on ingredients
SARA 311/312
Classification : Refer to Section 2: Hazards Identification of this SDS for classification of substance.

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals Montreal Protocol
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Not listed.

Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.

Inventory list
Australia : This material is listed or exempted.

Canada : This material is listed or exempted.

China : This material is listed or exempted.

Europe : This material is listed or exempted.

Japan : Japan inventory (CSCL): Not determined.

Japan inventory (ISHL): Not determined.

Republic of Korea : This material is listed or exempted.

New Zealand : This material is listed or exempted.

Philippines : This material is listed or exempted.

Taiwan : This material is listed or exempted.

Turkey : Not determined.

United States : This material is active or exempted.

Thailand : This material is listed or exempted.

Viet Nam : This material is listed or exempted.

Not listed.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 9/11 Nitrogen
Section 16. Other information
2/24/2022
History
Date of printing
Date of issue/Date of
revision
Version
Notice to reader
Date of previous issue
:
:
:
:

References : Not available.

Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations
2/24/2022
1/28/2022

7.01 Hazardous Material Information System (U.S.A.)
0 0
3 0
0 0
/
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service mark of the American Coatings Association, Inc.

The customer is responsible for determining the PPE code for this material. For more information on HMIS® Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.

Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.

Procedure used to derive the classification
Classification Justification
GASES UNDER PRESSURE - Compressed gas Expert judgment
SIMPLE ASPHYXIANTS Expert judgment
SA
Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 10/11 Nitrogen
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Date of issue/Date of revision : 2/24/2022 Date of previous issue : 1/28/2022 Version : 7.01 11/11 Oxygen
OXYGEN, COMPRESSED; oxygen gas
Gas.

SAFETY DATA SHEET
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
:

Chemical name : oxygen
Supplier's details :

Oxygen
Product use : Synthetic/Analytical chemistry.

Synonym : OXYGEN, COMPRESSED; oxygen gas
SDS # : 001043
:24-hour telephone
Airgas USA, LLC and its affiliates
259 North Radnor-Chester Road
Suite 100
Radnor, PA 19087-5283
1-610-687-5253
1-866-734-3438
Section 2. Hazards identification
OXIDIZING GASES - Category 1
GASES UNDER PRESSURE - Compressed gas
Classification of the
substance or mixture
:

Signal word : Danger
Hazard statements : May cause or intensify fire; oxidizer.

Contains gas under pressure; may explode if heated.

Hazard pictograms :

Precautionary statements
Prevention : Keep away from clothing and other combustible materials. Keep reduction valves, valves and fittings free from oil and grease.

Response : In case of fire: Stop leak if safe to do so.

Storage : Protect from sunlight. Store in a well-ventilated place.

Disposal : Not applicable.

GHS label elements
General :

Hazards not otherwise
classified
:

OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use.

Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use.

Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction. Open valve slowly. Use only with equipment cleaned for Oxygen service.

None known.

Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 1/11 Oxygen
Section 3. Composition/information on ingredients
oxygen 100 7782-44-7
Ingredient name CAS number%
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Chemical name : oxygen
Other means of
identification
: OXYGEN, COMPRESSED; oxygen gas
CAS number : 7782-44-7
Substance/mixture
CAS number/other identifiers
:

Occupational exposure limits, if available, are listed in Section 8.

Substance
Any concentration shown as a range is to protect confidentiality or is due to batch variation.

Product code : 001043
As this product is a gas, refer to the inhalation section.

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Description of necessary first aid measures
Specific treatments : No specific treatment.

Most important symptoms/effects, acute and delayed
Inhalation : No known significant effects or critical hazards.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Eye contact : No specific data.

Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary Frostbite : Try to warm up the frozen tissues and seek medical attention.

Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 2/11 Oxygen
Section 4. First aid measures
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

See toxicological information (Section 11)
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Contact supplier immediately for specialist advice. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool. If involved in fire, shut off flow immediately if it can be done without risk.

Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
No specific data.

Contains gas under pressure. Oxidizing material. This material increases the risk of fire and may aid combustion. Contact with combustible material may cause fire. In a fire or if heated, a pressure increase will occur and the container may burst or explode.

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Special protective
equipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.

Extinguishing media
:
:
:

None known.

Suitable extinguishing
media
:

Unsuitable extinguishing
media
:

Special protective actions
for fire-fighters
:

Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures Immediately contact emergency personnel. Stop leak if without risk. Use spark-proof tools and explosion-proof equipment. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.
:
: No action shall be taken involving any personal risk or without suitable training.

Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Shut off all ignition sources. No flares, smoking or flames in hazard area.

Avoid breathing gas. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment.

Ensure emergency procedures to deal with accidental gas releases are in place to avoid contamination of the environment. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Large spill :

Immediately contact emergency personnel. Stop leak if without risk. Use spark-proof tools and explosion-proof equipment.

Small spill :

Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non- emergency personnel".

Section 7. Handling and storage
Precautions for safe handling
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 3/11 Oxygen
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.

Store in accordance with local regulations. Store in a segregated and approved area.

Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over.

Cylinder temperatures should not exceed 52 °C (125 °F). Separate from reducing agents and combustible materials. Store away from grease and oil. Keep container tightly closed and sealed until ready for use. See Section 10 for incompatible materials before handling or use.
:
:

Protective measures Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Avoid breathing gas. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty.

Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement.

Avoid contact with eyes, skin and clothing. Empty containers retain product residue and can be hazardous. Keep away from clothing, incompatible materials and combustible materials. Keep reduction valves free from grease and oil. :
oxygen None.

Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side- shields.

Eye/face protection
:
:

Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

Appropriate engineering
controls
: Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.

Hygiene measures :

Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 4/11 Oxygen
Section 8. Exposure controls/personal protection
Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Respiratory protection :

Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
:

Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Section 9. Physical and chemical properties
Physical state
Melting point
Relative density
Solubility
Gas. [Compressed gas.]
-218.4°C (-361.1°F)
Not applicable.

Not available.

Odorless.Odor
pH
Colorless. Blue.Color
Evaporation rate Not available.

Auto-ignition temperature
Flash point
Not available.
[Product does not sustain combustion.]

0.65 Not applicable.

Not available.Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:

Appearance
Boiling point : -183°C (-297.4°F)
Flammability (solid, gas) : Extremely flammable in the presence of the following materials or conditions: reducing materials, combustible materials and organic materials.

Lower and upper explosive
(flammable) limits
: Not available.

Decomposition temperature : Not available.

Solubility in water : Not available.
: 32 g/moleMolecular weight
Flow time (ISO 2431) : Not available.

Vapor pressure
Vapor density 1.1 (Air = 1)
Not available.:
:

Specific Volume (ft 3/lb) : 12.0482
Gas Density (lb/ft 3) : 0.083
Critical temperature : -118.15°C (-180.7°F)
Section 10. Stability and reactivity
The product is stable.Chemical stability :

Possibility of hazardous
reactions
: Hazardous reactions or instability may occur under certain conditions of storage or use.

Conditions may include the following:
contact with combustible materials
Reactions may include the following:
risk of causing fire
Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 5/11 Oxygen
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid No specific data.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Highly reactive or incompatible with the following materials:
combustible materials
reducing materials
grease
oil
:
:

Incompatible materials :

Under normal conditions of storage and use, hazardous polymerization will not occur.Hazardous polymerization :

Section 11. Toxicological information
Acute toxicity
Not available.

Carcinogenicity
Not available.

Mutagenicity
Not available.

Teratogenicity
Not available.

Reproductive toxicity
Not available.

Irritation/Corrosion
Not available.

Sensitization
Not available.

Information on the likely
routes of exposure
Inhalation : No known significant effects or critical hazards.

As this product is a gas, refer to the inhalation section.:Ingestion Skin contact : Contact with rapidly expanding gas may cause burns or frostbite.

Contact with rapidly expanding gas may cause burns or frostbite.:Eye contact Symptoms related to the physical, chemical and toxicological characteristics Eye contact : No specific data.

Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.

Not available.

Aspiration hazard
Not available.

Information on toxicological effects
: Not available.

Potential acute health effects
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 6/11 Oxygen
Section 11. Toxicological information
Not available.

No known significant effects or critical hazards.General :

No known significant effects or critical hazards.Carcinogenicity :

No known significant effects or critical hazards.Mutagenicity :

No known significant effects or critical hazards.Teratogenicity :

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.

Skin contact
Ingestion
Inhalation No specific data.

No specific data.

No specific data.
:
:
:

Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure Numerical measures of toxicity
Not available.

Acute toxicity estimates
Potential immediate
effects
: Not available.

Short term exposure
Potential delayed effects : Not available.

Potential immediate
effects
: Not available.

Long term exposure
Potential delayed effects : Not available.

Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects : No known significant effects or critical hazards.

Product/ingredient name
oxygen 0.65 - low
Toxicity
Not available.

Persistence and degradability
Soil/water partition
coefficient (KOC)
: Not available.

Mobility in soil
Not available.

Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 7/11 Oxygen
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction.

Empty pressure vessels should be returned to the supplier. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Empty containers or liners may retain some product residues. Do not puncture or incinerate container.
:Disposal methods
Section 14. Transport information

OXYGEN,

COMPRESSED

2.2 (5.1)
-

OXYGEN,

COMPRESSED

2.2 (5.1)
-

OXYGEN,

COMPRESSED
UN1072

2.2 (5.1)
-
UN1072 UN1072
Limited quantity Yes.

Quantity limitation Passenger aircraft/rail: 75 kg. Cargo aircraft: 150 kg.

Special provisions A52
Quantity limitation Passenger and Cargo Aircraft: 75 kg. Cargo Aircraft Only: 150 kg.

DOT IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to IMO instruments
No. No. No.

Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
: Not available.
:

TDG
UN1072

OXYGEN,

COMPRESSED

2.2 (5.1)
-
No.

Product classified as per the following sections of the Transportation of Dangerous Goods Regulations: 2.13-2.17 (Class 2), 2.23-2.25 (Class 5).

Explosive Limit and Limited Quantity Index 0.125
ERAP Index 3000
Passenger Carrying Vessel Index 50
Passenger Carrying Road or Rail Index 75
Special provisions 42
Mexico
UN1072

OXYGEN,

COMPRESSED

2.2 (5.1)
-
No.

DOT Classification
TDG Classification
IATA
:
:
:
“Refer to CFR 49 (or authority having jurisdiction) to determine the information required for shipment of the product.”
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 8/11 Oxygen
Section 15. Regulatory information
U.S. Federal regulations
This material is listed.

This product does not require a Safe Harbor warning under California Prop. 65.

Massachusetts
:
:

California Prop. 65
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
New York : This material is not listed.

New Jersey : This material is listed.

Pennsylvania : This material is listed.

State regulations
TSCA 8(a) CDR Exempt/Partial exemption: This material is listed or exempted.

SARA 302/304
SARA 304 RQ : Not applicable.

No products were found.

Composition/information on ingredients
SARA 311/312
Classification : Refer to Section 2: Hazards Identification of this SDS for classification of substance.

International regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals Montreal Protocol
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Not listed.

Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.

Inventory list
Australia : This material is listed or exempted.

Canada : This material is listed or exempted.

China : This material is listed or exempted.

Europe : This material is listed or exempted.

Japan : Japan inventory (CSCL): Not determined.

Japan inventory (ISHL): Not determined.

New Zealand : This material is listed or exempted.

Philippines : This material is listed or exempted.

Not listed.

Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 9/11 Oxygen
Section 15. Regulatory information
Republic of Korea : This material is listed or exempted.

Taiwan : This material is listed or exempted.

Turkey : Not determined.

United States : This material is active or exempted.

Thailand : This material is listed or exempted.

Viet Nam : This material is listed or exempted.

Section 16. Other information
1/10/2022
History
Date of printing
Date of issue/Date of
revision
Version
Date of previous issue
:
:
:
:

Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient 1/10/2022
1/10/2022
3 Hazardous Material Information System (U.S.A.)
0 0
3 0
0 0
/
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks. Although HMIS® ratings and the associated label are not required on SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark and service mark of the American Coatings Association, Inc.

The customer is responsible for determining the PPE code for this material. For more information on HMIS® Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.

Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.

Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.

Procedure used to derive the classification
Classification Justification
OXIDIZING GASES - Category 1 Expert judgment
GASES UNDER PRESSURE - Compressed gas According to package OX
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 10/11 Oxygen
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Notice to reader
References : Not available.

MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) UN = United Nations
Date of issue/Date of revision : 1/10/2022 Date of previous issue : 1/10/2022 Version : 3 11/11

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE

THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.

INSURER(S) AFFORDING COVERAGE
INSURER F :

INSURER E :

INSURER D :

INSURER C :

INSURER B :

INSURER A :

NAIC #
NAME:

CONTACT
(A/C, No):

FAX
E-MAIL
ADDRESS:

PRODUCER
(A/C, No, Ext):

PHONE

INSURED
REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES
IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed.

If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS

CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

OTHER:
(Per accident)
(Ea accident)
$
$
N / A
SUBR
WVD
ADDL
INSD

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $
$
$PROPERTY DAMAGE
BODILY INJURY (Per accident)
BODILY INJURY (Per person)

COMBINED SINGLE LIMIT

AUTOS ONLY

AUTOSAUTOS ONLY

NON-OWNED

SCHEDULEDOWNED

ANY AUTO

AUTOMOBILE LIABILITY
Y / N

WORKERS COMPENSATION

AND EMPLOYERS' LIABILITY
OFFICER/MEMBER EXCLUDED?
(Mandatory in NH)
DESCRIPTION OF OPERATIONS below
If yes, describe under

ANY PROPRIETOR/PARTNER/EXECUTIVE
$
$
$
E.L. DISEASE - POLICY LIMIT
E.L. DISEASE - EA EMPLOYEE
E.L. EACH ACCIDENT
ER
OTH-

STATUTE
PER

LIMITS(MM/DD/YYYY)

POLICY EXP
(MM/DD/YYYY)

POLICY EFF

POLICY NUMBERTYPE OF INSURANCELTR
INSR
DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required)

EXCESS LIAB
UMBRELLA LIAB $EACH OCCURRENCE
$AGGREGATE
$
OCCUR

CLAIMS-MADE
DED RETENTION $
$PRODUCTS - COMP/OP AGG
$GENERAL AGGREGATE
$PERSONAL & ADV INJURY
$MED EXP (Any one person)
$EACH OCCURRENCE

DAMAGE TO RENTED
$PREMISES (Ea occurrence)

COMMERCIAL GENERAL LIABILITY

CLAIMS-MADE OCCUR
GEN'L AGGREGATE LIMIT APPLIES PER:

POLICY PRO-

JECT LOC

CERTIFICATE OF LIABILITY INSURANCE

DATE (MM/DD/YYYY)

CANCELLATION

AUTHORIZED REPRESENTATIVE
ACORD 25 (2016/03)
© 1988-2015 ACORD CORPORATION. All rights reserved.

CERTIFICATE HOLDER
The ACORD name and logo are registered marks of ACORD
HIRED

AUTOS ONLY
10/5/2023
NFP
Craig Santa Maria
2300 Contr
a Costa Blvd Suite 600
Pleasant Hill, CA 94523
925-956-7600
Valley Forge Insurance Company 20508
Scottsdale Insurance Company 41297
A 2,000,0007036614654 1/15/2023 1/15/2024
1,000,000
✓
10,000
✓
2,000,000
4,000,000
Excluded
A 7036618364 1/15/2023 1/15/2024 1,000,000
✓ ✓
A 7036614668 1/15/2023 1/15/2024 5,000,000✓✓
5,000,000
✓ 10,000
A Business Personal Property 7036614654 1/15/2023 1/15/2024 Limit: $10,000,000 A Business Income 7036614654 1/15/2023 1/15/2024 Limit: $1,500,000 A Earthquake Sprinkler Leakage 7036614654 1/15/2023 1/15/2024 Limit: $2,000,000 Craig Santa Maria
Certificate Department
[email protected]
B Builders Risk RBS0179438 2/21/2023 2/21/2024 Limit: $1,500,000 Science Corporation
1010 ATLANTIC AVE STE 100
ALAMED
A CA 94501
76711401
✓ ✓
City of Alameda, Alameda City Hall, RiverRock Real Estate Group, Inc., are included as Additional Insured on a Primary & Non-Contributory basis City of Alameda
Alameda City Hall
Attn: City Manager
2263 Santa Clara A
ve
Alameda CA 94501
RE: Location: 1190 West Tower Avenue, Alameda, CA 94501 under the General Liability policy per the attached endorsements and per written contract with named insured. 76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 1 of 14 This certificate cancels and supersedes ALL previously issued certificates.

OK - 10/5/23 - LKC

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 1 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

It is understood and agreed that this endorsement amends the COMMERCIAL GENERAL LIABILITY COVERAGE PART as follows. If any other endorsement attached to this policy amends any provision also amended by this endorsemen,t then that other endorsement controls with respect to such provision, and the changes made by this endorsement with respect to such provision do not apply.

TABLE OF CONTENTS

1. Additional Insureds

2. Additional Insured - Primary And Non-Contributory To Additional lnsured's Insurance

3. Bodily Injury - Expanded Definition

4. Broad Knowledge of Occurrence/ Notice of Occurrence

5. Broad Named Insured

6. Estates, Legal Representatives and Spouses

7. Expected Or Intended Injury- Exception for Reasonable Force

8. In Rem Actions

9. Incidental Health Care Malpractice Coverage

10. Joint Ventures/Partnership/Limited Liability Companies

11. Legal Liability - Damage To Premises

12. Medical Payments

13. Non-owned Aircraft Coverage

14. Non-owned Watercraft

15. Personal And Advertising Injury- Discrimination or Humiliation

16. Personal And Advertising Injury - Contractual Liability

17. Property Damage - Elevators

18. Supplementary Payments

19. Unintentional Failure To Disclose Hazards

20. Waiver of Subrogation - Blanket

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 2 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 2 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office. Inc., with its permission.

1. ADDITIONAL INSUREDS
a. WHO 15 AN INSURED is amended to include as an Insured any person or organization described in paragraphs A. through K. below whom a Named Insured is required to add as an additional insured on this Coverage Part under a written contract or written agreement, provided such contract or agreement:
(1) is currently in effect or becomes effective during the term of this Coverage Part; and (2) was executed prior to:
(a) the bodily injury or property damage; or
(b) the offense that caused the personal and advertising injury, for which such additional insured seeks coverage.
b. However, subject always to the terms and conditions of this policy, including the limits of insurance, the Insurer will not provide such additional insured with:
(1) a higher limit of insurance than required by such contract or agreement; or (2) coverage broader than required by such contract or agreement, and in no event broader than that described by the applicable paragraph A. through K. below.

Any coverage granted by this endorsement shall apply only to the extent permissible by law.

A. Controlling Interest
Any person or organization with a controlling interest in a Named Insured, but only with respect to such person or organization's liability for bodily injury, property damage or personal and advertising injury arising out of:

1. such person or organization's financial control of a Named Insured; or

2. premises such person or organization owns, maintains or controls while a Named Insured leases or occupies such premises;
provided that the coverage granted by this paragraph does not apply to structural alterations, new construction or demolition operations performed by, on behalf of, or for such additional insured.

B. Co-owner of Insured Premises
A co-owner of a premises co -owned by a Named Insured and covered under this insurance but only with respect to such co-owner's liability for bodily injury, property damage or personal and advertising injury as co-owner of such premises.

C. Grantor of Franchise
Any person or organization that has granted a franchise to a Named Insured, but only with respect to such person or organization's liability for bodily injury, property damage or personal and advertising injury as grantor of a franchise to the Named Insured.

D. Lessor of Equipment
Any person or organization from whom a Named Insured leases equipment, but only with respect to liability for bodily injury, property damage or personal and advertising injury caused, in whole or in part, by the Named lnsured's maintenance, operation or use of such equipment, provided that the occurrence giving rise to such bodily injury, property damage or the offense giving rise to such personal and advertising injury takes place prior to the termination of such lease.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 3 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 3 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office. Inc., with its permission.

E. Lessor of Land
Any person or organization from whom a Named Insured leases land but only with respect to liability for bodily injury, property damage or personal and advertising injury arising out of the ownership, maintenance or use of such land, provided that the occurrence giving rise to such bodily injury or property damage, or the offense giving rise to such personal and advertising injury, takes place prior to the termination of such lease. The coverage granted by this paragraph does not apply to structural alterations, new construction or demolition operations performed by, on behalf of, or for such additional insured.

F. Lessor of Premises
An owner or lessor of premises leased to the Named Insured, or such owner or lessor's real estate manager, but only with respect to liability for bodily injury, property damage or personal and advertising injury arising out of the ownership, maintenance or use of such part of the premises leased to the Named Insured, and provided that the occurrence giving rise to such bodily injury, property damage or the offense giving rise to such personal and advertising injury takes place prior to the termination of such lease. The coverage granted by this paragraph does not apply to structural alterations, new construction or demolition operations performed by, on behalf of, or for such additional insured.

G. Mortgagee, Assignee or Receiver
A mortgagee, assignee or receiver of premises but only with respect to such mortgagee, assignee or receiver's liability for bodily injury, property damage or personal and advertising injury arising out of the Named lnsured's ownership, maintenance, or use of a premises by a Named Insured.

The coverage granted by this paragraph does not apply to structural alterations, new construction or demolition operations performed by, on behalf of, or for such additional insured.

H. State or Governmental Agency or Subdivision or Political Subdivisions - Permits A state or governmental agency or subdivision or political subdivision that has issued a permit or authorization, but only with respect to such state or governmental agency or subdivision or political subdivision's liability for bodily injury, property damage or personal and advertising injury arising out of:

1. the following hazards in connection with premises a Named Insured owns, rents, or controls and to which this insurance applies:
a. the existence, maintenance, repair, construction, erection, or removal of advertising signs, awnings, canopies, cellar entrances, coal holes, driveways, manholes, marquees, hoistaway openings, sidewalk vaults, street banners, or decorations and similar exposures; or b. the construction, erection, or removal of elevators; or c. the ownership, maintenance or use of any elevators covered by this insurance; or

2. the permitted or authorized operations performed by a Named Insured or on a Named lnsured's behalf.

The coverage granted by this paragraph does not apply to:
a. Bodily injury, property damage or personal and advertising injury arising out of operations performed for the state or governmental agency or subdivision or political subdivision; or b. Bodily injury or property damage included within the products-completed operations hazard.

With respect to this provision's requirement that additional insured status must be requested under a written contract or agreement, the Insurer will treat as a written contract any governmental permit that requires the Named Insured to add the governmental entity as an additional insured.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 4 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 4 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

I. Trade Show Event Lessor

1. With respect to a Named lnsured's participation in a trade show event as an exhibitor, presenter or displayer, any person or organization whom the Named Insured is required to include as an additional insured, but only with respect to such person or organization's liability for bodily injury, property damage or personal and advertising injury caused by:
a. the Named lnsured's acts or omissions; or
b. the acts or omissions of those acting on the Named lnsured's behalf, in the performance of the Named lnsured's ongoing operations at the trade show event premises during the trade show event.

2. The coverage granted by this paragraph does not apply to bodily injury or property damage included within the products-completed operations hazard.

J. Vendor
Any person or organization but only with respect to such person or organization's liability for bodily injury or property damage arising out of your products which are distributed or sold in the regular course of such person or organization's business, provided that:

1. The coverage granted by this paragraph does not apply to:
a. bodily injury or property damage for which such person or organization is obligated to pay damages by reason of the assumption of liability in a contract or agreement unless such liability exists in the absence of the contract or agreement;
b. any express warranty unauthorized by the Named Insured; c. any physical or chemical change in any product made intentionally by such person or organization; d. repackaging, except when unpacked solely for the purpose of inspection, demonstration, testing, or the substitution of parts under instructions from the manufacturer, and then repackaged in the original container;
e. any failure to make any inspections , adjustments, tests or servicing that such person or organization has agreed to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products;
f. demonstration, installation, servicing or repair operations, except such operations performed at the such person or organization's premises in connection with the sale of a product; g. products which, after distribution or sale by the Named Insured, have been labeled or relabeled or used as a container, part or ingredient of any other thing or substance by or for such person or organization; or h. bodily injury or property damage arising out of the sole negligence of such person or organization for its own acts or omissions or those of its employees or anyone else acting on its behalf. However, this exclusion does not apply to:
(1) the exceptions contained in Subparagraphs d. or f. above; or (2) such inspections, adjustments, tests or servicing as such person or organization has agreed with the Named Insured to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products.

2. This Paragraph J. does not apply to any insured person or organization, from whom the Named Insured has acquired such products, nor to any ingredient, part or container, entering into, accompanying or containing such products.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 5 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 5 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

3. This Paragraph J. also does not apply:
a. to any vendor specifically scheduled as an additional insured by endorsement to this Coverage Part; b. to any of your products for which coverage is excluded by endorsement to this Coverage Part; nor c. if bodily injury or property damage included within the products-completed operations hazard is excluded by endorsement to this Coverage Part.

K. Other Person Or Organization
Any person or organization who is not an additional insured under Paragraphs A. through J. above. Such additional insured is an Insured solely for bodily injury, property damage or personal and advertising injury for which such additional insured is liable because of the Named lnsured's acts or omissions.

The coverage granted by this paragraph does not apply to any person or organization:

1. for bodily injury, property damage, or personal and advertising injury arising out of the rendering or failure to render any professional service;

2. for bodily injury or property damage included within the products-completed operations hazard; nor

3. who is specifically scheduled as an additional insured on another endorsement to this Coverage Part.

2. ADDITIONAL INSURED - PRIMARY AND NON -CONTRIBUTORY TO ADDITIONAL INSURED'S INSURANCE A. The Other Insurance Condition in the COMMERCIAL GENERAL LIABILITY CONDITIONS Section is amended to add the following paragraph:

If the Named Insured has agreed in writing in a contract or agreement that this insurance is primary and non - contributory relative to an additional insured's own insurance, then this insurance is primary, and the Insurer will not seek contribution from that other insurance. For the purpose of this Provision 2., the additional insured's own insurance means insurance on which the additional insured is a named insured .

B. With respect to persons or organizations that qualify as additional insureds pursuant to paragraph 1.K. of this endorsement, the following sentence is added to the paragraph above:

Otherwise, and notw ithstanding anything to the contrary elsewhere in this Condition, the insurance provided to such person or organization is excess of any other insurance available to such person or organization.

3. BODILY INJURY - EXPANDED DEFINITION
Under DEFINITIONS the definition of bodily injury is deleted and replaced by the following:

Bodily injury means physical injury, sickness or disease sustained by a person, including death, humiliation, shock, mental anguish or mental injury sustained by that person at any time which results as a consequence of the physical injury, sickness or disease.

4. BROAD KNOWLEDGE OF OCCURRENCE/ NOTICE OF OCCURRENCE
Under CONDITIONS, the condition entitled Duties in The Event of Occurrence, Offense, Claim or Suit is amended to add the following:

A. BROAD KNOWLEDGE OF OCCURRENCE
The Named Insured must give the Insurer or the Insurer's authorized representative notice of an occurrence, offense or claim only when the occurrence, offense or claim is known to a natural person Named Insured, to a partner, executive officer, manager or member of a Named Insured, or to an employee designated by any of the above to give such notice.

B. NOTICE OF OCCURRENCE

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 6 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 6 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

The Named lnsured's rights under this Coverage Part will not be prejudiced if the Named Insured fails to give the Insurer notice of an occurrence, offense or claim and that failure is solely due to the Named lnsured's reasonable belief that the bodily injury or property damage is not covered under this Coverage Part. However, the Named Insured shall give written notice of s uch occurrence, offense or claim to the Insurer as soon as the Named Insured is aware that this insurance may apply to such occurrence, offense or claim.

5. BROAD NAMED INSURED
WHO IS AN INSURED is amended to delete its Paragraph 3. in its entirety and replace it with the following:

3. Pursuant to the limitations described in Paragraph 4. below, any organization in which a Named Insured has management control:
a. on the effective date of this Coverage Part; or
b. by reason of a Named Insured creating or acquiring the organization during the policy period, qualifies as a Named Insured, provided that there is no other similar liability insurance, whether primary , contributory, excess, contingent or otherwise, which provides coverage to such organization, or which would have provided coverage but for the exhaustion of its limit, and without regard to whether its coverage is broader or narrower than that provided by this insurance.

But this BROAD NAMED INSURED provision does not apply to:
(a) any partnership, limited liability company or joint venture; or (b) any organization for which coverage is excluded by another endorsement attached to this Coverage Part.

For the purpose of this provision, management control means:

A. owning interests representing more than 50% of the voting, appointment or designation power for the selection of a majority of the Board of Directors of a corporation; or B. having the right, pursuant to a written trust agreement, to protect, control the use of, encumber or transfer or sell property held by a trust.

4. With respect to organizations which qualify as Named Insureds by virtue of Paragraph 3. above, this insurance does not apply to:
a. bodily injury or property damage that first occurred prior to the date of management control, or that first occurs after management control ceases; nor
b. personal or advertising injury caused by an offense that first occurred prior to the date of management control or that first occurs after management control ceases.

5. The insurance provided by this Coverage Part applies to Named Insureds when trading under their own names or under such other trading names or doing- business-as names (dba) as any Named Insured should choose to employ.

6. ESTATES, LEGAL REPRESENTATIVES, AND SPOUSES
The estates, heirs, legal representatives and spouses of any natural person Insured shall also be insured under this policy; provided, however, coverage is afforded to such estates, heirs, legal representatives, and spouses only for claims arising solely out of their capacity or status as such and, in the case of a spouse, where such claim seeks damages from marital community property, jointly held property or property transferred from such natural person Insured to such spouse. No coverage is provided for any act, error or omission of an estate, heir, legal representative, or spouse outside the scope of such person's capacity or status as such, provided however that the spouse of a natural person Named Insured and the spouses of members or partners of joint venture or partnership Named Insureds are Insureds with respect to such spouses' acts, errors or omissions in the conduct of the Named lnsured's business.
76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 7 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 7 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

7. EXPECTED OR INTENDED INJURY - EXCEPTION FOR REASONABLE FORCE Under COVERAGES, Coverage A - Bodily Injury And Property Damage Liability, the paragraph entitled Exclusions is amended to delete the exclusion entitled Ex pected or Intended Injury and replace it with the following:

This insurance does not apply to:

Expected or Intended Injury
Bodily injury or property damage expected or intended from the standpoint of the Insured. Thi s exclusion does not apply to bodily injury or property damage resulting from the use of reasonable force to protect persons or property.

8. IN REM ACTIONS
A quasi in rem action against any vessel owned or operated by or for the Named Insured, or chartered by or for the Named Insured, will be treated in the same manner as though the action were in personam against the Named Insured.

9. INCIDENTAL HEALTH CARE MALPRACTICE COVERAGE
Solely with res pect to bodily injury that arises out of a health care incident:

A. Under C OVERAGES, Coverage A - Bodily Injury And Property Damage Liability, the Insuring Agreement is amended to replace Paragraphs 1.b.(1) and 1.b.(2) with the following:
b. This insurance applies to bodily injury provided that the professional health care services are incidental to the Named lnsured's primary business purpose, and only if:
(1) such b odily injury is caused by an occurrence that takes place in the coverage territory. (2) the bodi ly injury first occurs during the policy period. All bodily injury arising from an occurrence will be deemed to have occurred at the time of the first act, error, or omission that is part of the occurrence; and
B. Under C OVERAGES, Coverage A - Bodily Injury And Property Damage Liability, the paragraph entitled Exclusions is amended to:
i. add the following to the E mployers Liability exclusion:

This exclusion applies only if the bodily injury arising from a health care incident is covered by other li
ability insurance available to the Insured (or which would have been available but for exhaustion of its limits).
ii. delete the exclusion entitled C ontractual Liability and replace it with the following:

This insurance does not apply to:

Contractual Liability
the lnsured's actual or alleged liability under any oral or written contract or agreement, including but not li
mited to express warranties or guarantees.
iii. add the following additional exclusions.

This insurance does not apply to:

Discrimination
any actual or alleged discrimination, humiliation or harassment, including but not limited to clai ms based on an individual's race, creed, color, age, gender, national origin, religion, disability, marital status or sexual orientation.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 8 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 8 of 13 ends

Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023

VALLEY FORGE INSURANCE COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office. Inc., with its permission.

Dishonesty or Crime
Any actual or alleged dishonest, criminal or malicious act, error or omission.

Medicare/Medicaid Fraud
any actual or alleged violation of law with respect to Medicare, Medicaid, Tricare or any similar federal, state or local governmental program.

Services Excluded by Endorsement
Any health care incident for which coverage is excluded by endorsement.

C. DEFINITIONS is amended to:
i. add the following definitions:

Health care incident means an act, error or omission by the Named lnsured's employees or volunteer workers in the rendering of:
a. professional health care services on behalf of the Named Insured or b. Good Samaritan services rendered in an emergency and for which no payment is demanded or received.

Professional health care services means any health care services or the related furnishing of food, beverages, medical supplies or appliances by the following providers in their capacity as such but solely to the extent they are duly licensed as required:
a. Physician;
b. Nurse;
c. Nurse practitioner;
d. Emergency medical technician;
e. Paramedic;
f. Dentist;
g. Physical therapist;
h. Psychologist;
i. Speech therapist;
j. Other allied health professional; or
Professional health care services does not include any services rendered in connection with human clinical trials or product testing.
ii. delete the definition of occurrence and replace it with the following:

Occurrence means a health care incident. All acts, errors or omissions that are logically connected by any common fact, circumstance, situation, transaction, event, advice or decision will be considered to constitute a single occurrence;
iii. amend the definition of Insured to:
a. add the following:
• the Named lnsured's employees are Insureds with respect to:

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 9 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 9 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01 / 1 5 / 2 023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

(1) bodily injury to a co-employee while in the course of the co-employee's employment by the Named Insured or while performing duties related to the conduct of the Named lnsured's business; and
(2) bodily injury to a volunteer worker while performing duties related to the conduct of the Named lnsured's business;
when such bodily injury arises out of a health care incident. • the Named lnsured's volunteer workers are Insureds with respect to:
(1) bodily injury to a co-volunteer worker while performing duties related to the conduct of the Named lnsured's business; and
(2) bodily injury to an employee while in the course of the employee's employment by the Named Insured or while performing duties related to the conduct of the Named lnsured's business; when such bodily injury arises out of a health care incident. b. delete Subparagraphs (a), (b), (c) and (d) of Paragraph 2.a.(1) of WHO IS AN INSURED. c. add the following:

Insured does not include any physician while acting in his or her capacity as such.

D. The Other Insurance condition is amended to delete Paragraph b.(1) in its entirety and replace it with the following:

Other Insurance
b. Excess Insurance
(1) To the extent this insurance applies, it is excess over any other insurance, self insurance or risk transfer instrument, whether primary, excess, contingent or on any other basis, except for insurance purchased specifically by the Named Insured to be excess of this coverage.

10. JOINT VENTURES/ PARTNERSHIP/ LIMITED LIABILITY COMPANIES WHO IS AN INSURED is amended to delete its last paragraph and replace it with the following:

No person or organization is an Insured with respect to the conduct of any current or past partnership, joint venture or limited liability company that is not shown as a Named Insured in the Declarations, except that if the Named Insured was a joint venturer, partner, or member of a limited liability company and such joint venture, partnership or limited liability company terminated prior to or during the policy period, such Named Insured is an Insured with respect to its interest in such joint venture, partnership or limited liability company but only to the extent that:
a. any offense giving rise to personal and advertising injury occurred prior to such termination date, and the personal and advertising injury arising out of such offense first occurred after such termination date; b. the bodily injury or property damage first occurred after such termination date; and c. there is no other valid and collectible insurance purchased specifically to insure the partnership, joint venture or limited liability company.

11. LEGAL LIABILITY - DAMAGE TO PREMISES
A. Under COVERAGES, Coverage A - Bodily Injury and Property Damage Liability, the paragraph entitled Exclusions is amended to delete the first paragraph immediately following subparagraph (6) of the Damage to Property exclusion and replace it with the following:

Paragraphs (1), (3) and (4) of this exclusion do not apply to property damage (other than damage by fire) to premises rented to the Named Insured or temporarily occupied by the Named Insured with the permission of the 76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 10 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 10 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01 / 1 5 / 2 023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

owner, nor to the contents of premises rented to the Named Insured for a period of 7 or fewer consecutive days.

A separate limit of insurance applies to Damage To Premises Rented To You as described in LIMITS OF INSURANCE.

B. Under COVERAGES, Coverage A - Bodily Injury and Property Damage Liability, the paragraph entitled Exclusions is amended to delete its last paragraph and replace it with the following:

Exclusions c. through n. do not apply to damage by fire to premises while rented to a Named Insured or temporarily occupied by a Named Insured with permission of the owner , nor to damage to the contents of premises rented to a Named Insured for a period of 7 or fewer consecutive d ays.

A separate limit of insurance applies to this coverage as described in the LIMITS OF INSURANCE Section.

C. LIMITS OF INSURANCE is amended to delete Paragraph 6. (the Damage To Premises Rented To You Limit) and replace it with the following:

6. Subject to Paragraph 5. above, (the Each Occurrence Limit), the Damage To Premises Rented To You Limit is the most the Insurer will pay under COVERAGE A for damages because of property damage to:
a. any one premises while rented to a Named Insured or temporarily occupied by a Named Insured with the permission of the owner ; and
b. contents of such premises if the premises is rented to the Named Insured for a period of 7 or fewer consecutive days .

The Damage To Premises Rented To You Limit is $200,000. unless a higher Damage to Premises Rented to You Limit is shown in the Declarations .

D. The Other Insurance Condition is amended to delete Paragraph b.(1)(a)(ii), and replace it with the following:
(ii) That is property insurance for premises rented to a Named Insured, for premises temporarily occupied by the Named Insured with the permission of the owner ; or for personal property of others in the Named lnsured's care, custody or control;
E. This Provision 11. does not apply if liability for damage to premises rented to a Named Insured is excluded by another endorsement attached to this Coverage Part.

12. MEDICAL PAYMENTS
A. LIMITS OF INSURANCE is amended to delete Paragraph 7. (the Medical Expense Limit) and replace it with the following:

7. Subject to Paragraph 5. above (the Each Occurrence Limit), the Medical Expense Limit is the most the Insurer will pay under Coverage C - Medical Payments for all medical expenses because of bodily injury sustained by any one person. The Medical Expense Limit is the greater of:
(1) $15,000 unless a different amount is shown here:
(2) the amount shown in the Declarations for Medical Expense Limit. ; or
B. Under COVERAGES, Coverage C - Medical Payments, the Insuring Agreement is amended to replace Paragraph 1.a.(3)(b) with the following:
(b) The expenses are incurred and reported to the Insurer within three years of the date of the accident ; and

13. NON-OWNED AIRCRAFT
Under COVERAGES, Coverage A - Bodily Injury and Property Damage Liability, the paragraph entitled Exclusions is amended as follows:

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 11 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 11 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office. Inc., with its permission.

.c.o.

The exclusion entitled Aircraft, Auto or Watercraft is amended to add the following:

This exclusion does not apply t o an aircraft not owned by any Named Insured, provided that:

1. the pilot in command holds a currently effective certificate issued by the duly constituted authority of the United States of America or Canada, designating that person as a commercial or airline transport pilot;

2. the aircraft is rented with a trained, paid crew to the Named Insured; and

3. the aircraft is not being used to carry persons or property for a charge.

14. NON-OWNED WATERCRAFT
Under COVERAGES, Coverage A - Bodily Injury and Property Damage Liability, the paragraph entitled Exclusions is amended to delete subparagraph (2) of the exclusion entitled Aircraft, Auto or Watercraft, and replace it with the following.

This exclusion does not apply to:
(2) a watercraft that is not owned by any Named Insured, provided the watercraft is:
(a) less than 75 feet long; and
(b) not being used to carry persons or property for a charge.

15. PERSONAL AND ADVERTISING INJURY -DISCRIMINATION OR HUMILIATION A. Under DEFINITIONS, the definition of personal and advertising injury is amended to add the following tort:
• Discrimination or humiliation that results in injury to the feelings or reputation of a natural per son.

B. Under COVERAGES, Coverage B - Personal and Advertising Injury Liability, the paragraph entitled Exclusions is amended to:

1. delete the Exclusion entitled Knowing Violation Of Rights Of Another and replace it with the following:

This insurance does not apply to:

Knowing Violation of Rights of Another
co Personal and advertising injury caused by or at the direction of the Insured with the knowledge that the act ;z would violate the rights of another and would inflict personal and advertising injury. This exclusion shall not apply to discrimination or humiliation that results in injury to the feelings or reputation of a natural person, but only if such discrimination or humiliation is not done intentionally by or at the direction of:
(a) the Named Insured; or
(b) any executive officer, director, stockholder, partner, member or manager (if the Named Insured is a limited liability company) of the Named Insured.

2. add the following exclusions:

This insurance does not apply to:

Employment Related Discrimination
discrimination or humiliation directly or indirectly related to the employment, prospective employment, past employment or termination of employment of any person by any Insured.

Premises Related Discrimination
discrimination or humiliation arising out of the sale, rental, lease or sub-lease or prospective sale, rental, lease or sub-lease of any room, dwelling or premises by or at the direction of any Insured.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 12 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 12 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office. Inc., with its permission.

Notwithstanding the above, there is no coverage for fines or penalties levied or imposed by a governmental entity because of discrimination.

The coverage provided by this PERSONAL AND ADVERTISING INJURY -DISCRIMINATION OR HUMILIATION Provision does not apply to any person or organization whose status as an Insured derives solely from • Provision 1. ADDITIONAL INSUREDS of this endorsement; or • attachment of an additional insured endorsement to this Coverage Part.

16. PERSONAL AND ADVERTISING I NJURY - CONTRACTUAL LIABILITY A. Under COVERAGES, Coverage B -Personal and Advertising Injury Liability, the paragraph entitled Exclusions is amended to delete the exclusion entitled Contractual Liability and replace it with the following:

This insurance does not apply to:

Contractual Liability
Personal and advertising injury for which the Insured has assumed liability in a contract or agreement.

This exclusion does not apply to liability for damages:
(1) that the Insured would have in the absence of the contract or agreement; or (2) assumed in a contract or agreement that is an insured contract provided the offense that caused such personal or advertising injury first occurred subsequent to the execution of such insured contract. Solely for the purpose of liability assumed in an insured contract, reasonable attorney fees and necessary litigation expenses incurred by or for a party other than an Insured are deemed to be damages because of personal and advertising injury provided:
(a) liability to such party for, or for the cost of, that party's defense has also been assumed in such insured contract; and
(b) such attorney fees and litigation expenses are for defense of such party against a civil or alternative dispute resolution proceeding in which covered damages are alleged.

B. Solely for the purpose of the coverage provided by this paragraph, DEFINITIONS is amended to delete the definition of insured contract in its entirety, and replace it with the following:

Insured contract means that part of a written contract or written agreement pertaining to the Named l nsured's business under which the Named Insured assumes the tort liability of another party to pay for personal or advertising injury arising out of the offense of false arrest, detention or imprisonment. Tort liability means a liability that would be imposed by law in the absence of any contract or agreement.

C. Solely for the purpose of the coverage provided by this paragraph, the following changes are made to the Section entitled SUPPLEMENTARY PAYMENTS - COVERAGES A AND B:

1. Paragraph 2.d. is replaced by the following:
d. The allegations in the suit and the information the Insurer knows about the offense alleged in such suit are such that no conflict appears to exist between the interests of the Insured and the interests of the indemnitee;

2. The first unnumbered paragraph beneath Paragraph 2.f.(2)(b) is deleted and replaced by the following:

So long as the above conditions are met, attorneys fees incurred by the Insurer in the defense of that indem
nitee, necessary litigation expenses incurred by the Insurer, and necessary litigation expenses incurred by the indemnitee at the Insurer's request will be paid as defense costs. Notwithstanding the provisions of Paragraph e.(2) of the Contractual Liability exclusion (as amended by this Endorsement), such payments will

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 13 of 14 This certificate cancels and supersedes ALL previously issued certificates.

CNA PARAMOUNT
General Liability Extension Endorsement
CNA74879XX (1-15)

Page 13 of 13 ends

VALLEY FORGE INSURANCE
Policy No:

Endorsement No:

Effective Date:
7036614654
4 01/15/2023 COMPANY
Insured Name: SCIENCE CORPORATION
Copyright CNA All Rights Reserved. Includes copyrighted material of Insurance Services Office, Inc., with its permission.

This endorsement, which forms a part of and is for attachment to the Policy issued by the designated Insurers , takes effect on the effective date of said Policy at the hour stated in said Policy , unless another effective date is shown below, and expires concurrently with said Policy.

not be deemed to be damages for personal and advertising injury and will not reduce the limits of insurance.

D. This PERSONAL AND ADVERTISING INJURY - LIMITED CONTRACTUAL LIABILITY Provision does not apply if Coverage B -Personal and Advertisin g Injury Liability is excluded by another endorsement attached to this Coverage Part.

17. PROPERTY DAMAGE - ELEVATORS
A. Under COVERAGES, Coverage A - Bodily Injury and Property Damage Liability, the paragraph entitled Exclusions is amended such that the Damage to Your Product Exclusion and subparagraphs (3), (4) and (6) of the Damage to Property Exclusion do not apply to property damage that results from the use of elevators.

B. Solely for the purpose of the coverage provided by this PROPERTY DAMAGE - ELEVATORS Provision, the Other Insurance conditions is amended to add the following paragraph:

This insurance is excess over any of the other insurance, whether primary, excess, contingent or on any other basi
s that is Property insurance covering property of others damaged from the use of elevators.

18. SUPPLEMENTARY PAYMENTS
The section entitled SUPPLEMENTARY PAYMENTS - COVERAGES A AND Bis amended as follows:

A. Paragraph 1.b. is amended to delete the $250 limit shown for the cost of bail bonds and replace it with a $5,000. limit; and
B. Paragraph 1.d. is amended to delete the limit of $250 shown for daily loss of earnings and replace it with a $1,000. limit.

19. UNINTENTIONAL FAILURE TO DISCLOSE HAZARDS
If the Named Insured unintentionally fails to disclose all existing hazards at the inception date of the Named lnsured's Coverage Part, the Insurer will not deny coverage under this Coverage Part because of such failure.

20. WAIVER OF SUBROGATION - BLANKET
Under CONDITIONS, the Transfer Of Rights Of Recovery Against Others To Us Condition is amended to add the following:

The Insurer waives any right of recovery the Insurer may have against any person or organization because of paym
ents the Insurer makes for injury or damage arising out of:

1. the Named lnsured's ongoing operations; or

2. your work included in the products-completed operations hazard.

However, this waiver applies only when the Named Insured has agreed in writing to waive such rights of recovery in a written contract or written agreement, and only if such contract or agreement:

1. is in effect or becomes effective during the term of this Coverage Part; and

2. was executed prior to the bodily injury, property damage or personal and advertising injury giving rise to the claim.

All other terms and conditions of the Policy remain unchanged.

76711401 | 23-24 Master Certificate (1190 West Tower) | Taylor Olowofela | 10/5/2023 2:03:09 PM (PST) | Page 14 of 14 This certificate cancels and supersedes ALL previously issued certificates.

WLTR005

THE HARTFORD

BUSINESS SERVICE CENTER
3600 WISEMAN BLVD
SAN ANTONIO TX 78251 October 4, 2023
For Informational Purposes
1190 W TOWER AVE BLDG 11
ALAMEDA CA 94501-5001
Account Information:

Policy Holder Details : Science Corporation
Contact Us
Need Help?
Chat online or call us at
(866) 467-8730.

We're here Monday - Friday.

Enclosed please find aCertificate Of Insurancefor the above referenced Policyholder. Please contact us if you have any questions or concerns.

Sincerely,
Your Hartford Service Team

CERTIFICATE OF LIABILITY INSURANCE

DATE (MM/DD/YYYY)
10/04/2023

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATIONIS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

PRODUCER

AP INTEGO INSURANCE GROUP LLC
76251017
375 WOODCLIFF DRIVE STE 103
FAIRPORT NY 14450
CONTACT NAME:

PHONE
(A/C, No, Ext):
(888) 289-2939 FAX
(A/C, No):

E-MAIL ADDRESS:

INSURER(S) AFFORDING COVERAGE NAIC#
INSURER A : Hartford Fire and Its P&C Affiliates 00914

INSURED

SCIENCE CORPORATION
1190 W TOWER AVE BLDG 11
ALAMEDA CA 94501-5001
INSURER B :

INSURER C :

INSURER D :

INSURER E :

INSURER F :

COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED.NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

INSR

LTR TYPE OF INSURANCE ADDL
INSR
SUBR
WVD

POLICY NUMBER POLICY EFF
(MM/DD/YYYY)

POLICY EXP
(MM/DD/Y YYY) LIMITS

COMMERCIAL GENERAL LIABILITY EACH OCCURRENCE

CLAIMS-MADE OCCUR DAMAGE TO RENTED
PREMISES (Ea occurrence)
MED EXP (Any one person)

PERSONAL & ADV INJURY
GEN'L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE

POLICY PRO-
JECT

LOC PRODUCTS - COMP/OP AGG
OTHER:

AUTOMOBILE LIABILITY COMBINED SINGLE LIMIT
(Ea accident)
ANY AUTO BODILY INJURY (Per person)

ALL OWNED
AUTOS

SCHEDULED
AUTOS BODILY INJURY (Per accident)
HIRED
AUTOS

NON-OWNED
AUTOS

PROPERTY DAMAGE
(Per accident)

UMBRELLA LIAB

EXCESS LIAB
OCCUR

CLAIMS-
MADE

EACH OCCURRENCE

AGGREGATE
DED RETENTION $
A

WORKERS COMPENSATION

AND EMPLOYERS' LIABILITY
ANY

PROPRIETOR/PARTNER/EXECUTIVE
OFFICER/MEMBER EXCLUDED?
(Mandatory in NH)
If yes, describe under
DESCRIPTION OF OPERATIONS below
N/ A 76 WEG AM1L7V 07/01/2023 07/01/2024
X PER

STATUTE
OTH-
ER
Y/N E.L. EACH ACCIDENT $1,000,000
E.L. DISEASE -EA EMPLOYEE $1,000,000
E.L. DISEASE - POLICY LIMIT $1,000,000
DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) Those usual to the Insured's Operations.

CERTIFICATE HOLDER CANCELLATION
For Informational Purposes
1190 W TOWER AVE BLDG 11
ALAMEDA CA 94501-5001

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED

BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.

AUTHORIZED REPRESENTATIVE
© 1988-2015 ACORD CORPORATION. All rights reserved.

ACORD 25 (2016/03) The ACORD name and logo are registered marks of ACORD

← All documents from this meeting