Emergency Care
3800 E. Centre Avenue, Portage, MI 49002 USA | P +1 269 329 2100 | Toll -free +1 800 327 0770 | stryker.com Power-PRO™ XT Cot sole source information
To whom it may concern,
Stryker certifies that we are the sole manufacturer of Stryker’s Power-PRO XT Cot (Model 6506). This correspondence is to inform you of the characteristics of the Power-PRO Cot. These characteristics can be broken down into two primary categories: qualifications and ease of use.
Qualifications:
• I
PX6: The system is tested to withstand powerful water jets. • IEC 60601-1 and IEC 60601-1-2: The Power-PRO XT Cot conforms to industry standards for mechanical and electrical safety for medical electrical devices, as well as electromagnetic compatibility and immunity. • BS EN-1789:2007, clause 4.5.9 when used with Power-LOAD Cot Fastener and X-Restraints: This is a European dynamic crash test which subjects a 50th percentile dummy to nominal 10g deceleration for a minimum of 50ms.
Following the test there shall be no sharp edges.
• Meets SAE J3027 dynamic crash test safety standards when used with Power -LOAD/Performance-LOAD Cot Fastener and X-Restraints.
Ease of use:
• The cot has a weight capacity of 700 lb.
• When unloading with the manual release handle, the cot utilizes hydraulic dampening. Thus, the cot will not abruptly jar the operator or patient.
• The battery is placed at the foot end of the stretcher. • The cot legs power-retract in 3.5 seconds which speeds load time. • The cot provides a load height of 36” and is operator adjustable to match the deck height of individual ambulances. • The foot-end of the cot provides lifting bars and operator controls at two different heights, thus providing optimal ergonomics to most operator heights.
• The foot end of the cot contains a large battery indicator light which displays amber or green which indicates battery level. A warning is given by a flashing amber light, providing the operator the time to change the battery before fu ll de
pletion of power.
• The Model 6506 has 6” x 2” sealed casters and bearings. • The cot features a foot end mounted hourly usage meter. This tool can be used to determine the timing of preventative maintenance checks.
• The cot features powder-coating of the aluminum frame (including the patient handling surfaces) and sealed caster bearings, thus reducing aluminum oxidation throughout the cot. • The cot is power washable.
P
lease contact your Sales Representative for further information.
Sincerely,
J
ohn Guyeskey, Sr. Manager, Downstream Marketing
S
tryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: Performance-LOAD, Power-LOAD, Power-PRO, Stryker.
All other trademarks are trademarks of their respective owners or holders. The absence of a product, feature, or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo. Copyright © 2022 Stryker. M0000001063 REV AB