Aliso Viejo City Council
December 4, 2024

of real properties as shown on the last equalized roll within 300 feet of the subject business park and published in the Laguna Niguel News on November 21st.

The proposed project is a request by the Orange County Health Care Agency (“OCHCA”) to relocate their outpatient mental health clinic at 5 Mareblu Street to the first floor of 27141 Aliso Creek Road (previously 24-Hour Fitness). The proposed space measures 18,096 square feet in size, which will be remodeled to accommodate group rooms, clinician offices, and other office spaces. OCHCA will provide mental and behavioral services and programs that include group counseling, onsite substance abuse testing, individual and group therapy, peer services, crisis services and other supportive services.

Aliso Viejo Municipal Code (“AVMC”) Section 15.94.020 defines “outpatient medical uses, large” as an office facility where health services, and managerial, administrative, and clerical functions relating to medicine, physical or mental, are conducted, where persons are not admitted for a 24-hour stay or longer, and where six or more patients are receiving services at any given time. The services may be preventative, diagnostic, treatment, therapeutic, rehabilitative, or counseling in nature. Large outpatient medical use is permitted on the subject site zoned Business Park 2 with a CUP per AVMC Table

15.18.020. The proposed use falls under the AVMC definition of outpatient medical use, and therefore, requires a CUP.

Pursuant to AVMC Section 15.74.040.C, the following findings shall be made prior to the approval of the CUP.

1. Consistency with General Plan. The land use is consistent with the general plan and any applicable specific plan.

The General Plan land use designation for the subject site is Business Park. As previously noted, large outpatient medical use is permitted with approval of a CUP.

Therefore, this finding can be made.

2. Consistency with Zoning Code. The land use and associated development conform to the permitted use provisions and development standards of this zoning code and are consistent with this code and any applicable specific plan.

The zoning designation for the subject site is Business Park 2. As previously noted, large outpatient medical use is permitted with approval of a CUP. The proposed use only involves interior remodeling with no expansions to the subject building.

Therefore, the proposed use will comply with the development standards of the zoning code and this finding can be made.

3. Compliance with CEQA. Processing and approval of the permit application are in compliance with the requirements of the California Environmental Quality Act.

Section 21084 of the Public Resources Code requires that the CEQA guidelines include a list of classes of project which have been determined not to have a 189

significant effect on the environment and which shall, therefore, be exempt from the provisions of CEQA. CEQA Section 15301 Existing Facilities, Class 1, categorically exempts the operation, repair, maintenance, permitting, leasing, licensing, or minor alteration of existing public or private structures, involving negligible or no expansion of existing or former use. The proposed request is to operate an outpatient medical use within an existing building involving minor interior operations with no expansion of the former use. Therefore, this finding can be made.

4. Surrounding Uses. Approval of the application will not create conditions materially detrimental to the public health, safety and general welfare or injurious to or incompatible with other properties or land uses in the vicinity.

The subject site is part of a large business park with multiple buildings housing various tenants, including pharmacies, a preschool, instructional centers, offices, a church, light manufacturing, a dentist’s office, and a beauty salon. The proposed use will be located on the first floor of the building at the east end of the site. While some businesses focused on children are concentrated in the opposite building at the west end of the site, this building is screened by two other buildings in between.

The site’s layout and circulation do not encourage visitors to drive from one end to the other.

The proposed outpatient medical use (1 space per 200 square feet) requires fewer parking spaces than that of the former health/fitness club (1 space per 150 square feet). Additionally, the proposed use will have reduced operation hours (Monday through Friday 8am to 5pm, one weekday until 8pm, and closed on weekends) compared to the former 24-hour fitness club. Also, the proposed interior remodel will require compliance with applicable building codes and inspections for consistency. Therefore, this finding can be made.

Attachments:

1. Draft Resolution

2. Proposed Plans
190

RESOLUTION NO. 2024-___

A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF ALISO

VIEJO, CALIFORNIA, APPROVING A CONDITIONAL USE PERMIT TO OPERATE AN OUTPATIENT MEDICAL USE AT 27141 ALISO CREEK
ROAD (USE-2024-00009)
WHEREAS, on October 15, 2024, SAA, an interior design and architectural firm, submitted a conditional use permit application (“CUP”) on behalf of the County of Orange to operate an outpatient medical facility at 27141 Aliso Creek Road; WHEREAS, on October 24, 2024, a public notice was published in the Laguna Niguel News and mailed to all property owners within 300 feet of the subject site; WHEREAS, on November 6, 2024, the City Council held a duly noticed public hearing and considered public testimony. During the meeting, a tenant from the subject shopping center mentioned she did not receive notice of the hearing. Consequently, the City Council continued the public hearing and directed Staff to provide notice to all tenants of the subject business park; and
WHEREAS, on December 4, 2024, the City Council held a duly noticed public hearing as prescribed by law and considered public testimony and evidence and recommendations presented by staff in the agenda report and oral presentation.

NOW, THEREFORE, BE IT RESOLVED BY THE CITY COUNCIL OF THE CITY OF ALISO VIEJO AS FOLLOWS:

Section 1: Determination of Recitals. The City Council hereby finds and determines that all of the recitals set forth above are true and correct. The above recitals are hereby incorporated as substantive findings of this Resolution.

Section 2: Approval of Project and Findings for Conditional Use Permit. In accordance with AVMC 15.74.040(C), the City Council hereby makes the following findings of fact and approves a Conditional Use Permit (USE-2024-00009) to operate an outpatient medical use, subject to the conditions set forth in Exhibit “A” and project plans set forth in Exhibit “B”, which are exhibits are both attached hereto and incorporated herein by reference.

1. Consistency with General Plan. The land use is consistent with the general plan and any applicable specific plan. The General Plan land use designation for the subject site is Business Park. Large outpatient medical use is permitted with approval of a conditional use permit.

2. Consistency with Zoning Code. The land use and associated development conform to the permitted use provisions and development standards of this zoning code and are consistent with this code and any applicable specific plan. The zoning 191

designation for the subject site is Business Park 2. Large outpatient medical use is permitted with approval of a conditional use permit. The proposed use only involves interior remodeling with no physical changes to the subject building.

3. Compliance with CEQA. Processing and approval of the permit application are in compliance with the requirements of the California Environmental Quality Act.

Section 21084 of the Public Resources Code requires that the CEQA guidelines include a list of classes of project which have been determined not to have a significant effect on the environment and which shall, therefore, be exempt from the provisions of CEQA. CEQA Section 15301 Existing Facilities, Class 1, categorically exempts the operation, repair, maintenance, permitting, leasing, licensing, or minor alteration of existing public or private structures, involving negligible or no expansion of existing or former use. The proposed request is to operate an outpatient medical use within an existing building involving minor interior operations with no expansion of the former use.

4. Surrounding Uses. Approval of the application will not create conditions materially detrimental to the public health, safety and general welfare or injurious to or incompatible with other properties or land uses in the vicinity. The subject site is part of a large business park with multiple buildings housing various tenants, including pharmacies, a preschool, instructional centers, offices, a church, light manufacturing, a dentist’s office, and a beauty salon. The proposed use will be located on the first floor of the building at the east end of the site. While some businesses focused on children are concentrated in the opposite building at the west end of the site, this building is screened by two other buildings in between.

The site’s layout and circulation do not encourage visitors to drive from one end to the other. Additionally, the proposed outpatient medical use (1 space per 200 square feet) requires fewer parking spaces than that of the former health/fitness club (1 space per 150 square feet); proposes reduced operation hours (Monday through Thursday 8am to 6pm, Friday 8am to 5pm, and closed on the weekends) compared to the former 24-hour fitness club; and the associated interior remodel requires compliance with applicable building codes and inspections for consistency.

Section 3: Filing of Notice of Exemption.The City Council hereby authorizes and directs staff to prepare, execute and file with the Orange County Clerk a Notice of Exemption for the proposed Project.

Section 4: Location of Documents. The administrative record for the Project is maintained at City Hall located at 12 Journey, Suite 100, Aliso Viejo, CA 92656. The custodian of records is the City Clerk.
192

PASSED, APPROVED AND ADOPTED this 4th day of December 2024. __________________________
Mike Munzing
Mayor
APPROVED AS TO FORM: ATTEST:

__________________________ __________________________
Scott C. Smith, City Attorney Lauren Torres, Deputy City Clerk 193

STATE OF CALIFORNIA )
COUNTY OF ORANGE ) ss.

CITY OF ALISO VIEJO )
I, LAUREN TORRES, Deputy City Clerk of the City of Aliso Viejo, California, DO HEREBY CERTIFY that the foregoing is the original of Resolution No. 2024-__ duly passed and adopted by the City Council of the City of Aliso Viejo at their regular meeting held on the 4th day of December, 2024, by the following roll call vote, to wit:

AYES:

NOES:

ABSENT:
___________________________

LAUREN TORRES,

DEPUTY CITY CLERK
(SEAL)
194

Exhibit “A”
Conditions of Approval
27141 Aliso Creek Road (USE-2024-00009)

1. Approval. This approval allows Orange County Health Care Agency to operate an outpatient medical facility 27141 Aliso Creek Road. All activities shall be conducted indoors, on the first floor, that measures 18,096 square feet in size. Operation hours are limited to Monday through Friday 8am to 5pm, one weekday until 8pm, and closed on weekends.

2. Compliance with Permit. The establishment and operation of the approved use shall be in compliance with the approved permit and any plans, specifications and conditions of approval shown on and/or attached to the permit.

3. State Law. All large outpatient medical uses shall comply with the provisions of state law, including licensing.

4. Municipal and Building Codes. All large outpatient medical uses shall comply with the provisions of the City of Aliso Viejo Municipal Code and California Building Codes.

5. Fire Safety and Prevention. The Applicant is responsible for compliance with all applicable fire prevention standards and permits.

6. Operational Plan. An operational plan shall be provided prior to the issuance of a certificate of use and occupancy for review and approval by the Director. At a minimum, the plan shall include facility rules and procedures; compliance with applicable local, state and federal laws, discharged patient transportation protocols; staff training; and a “good neighbor policy,” which includes a written protocol for the on-site management to follow when a complaint is received from surrounding businesses and residents. Modifications to an operational or security plan shall be considered by the Director and acted upon in his or her discretion of whether such modifications will be detrimental to the public health, safety, and general welfare or injurious to or incompatible with other properties or land uses in the vicinity.

7. Security Plan. A security plan shall be provided prior to the issuance of a certificate of use and occupancy for review and approval by the Director. At a minimum, the plan shall include measures for maintaining a safe environment within and outside the facility; the use of cameras and storage of related footage and the posting of the “no loitering” signs.

8. Smoking. No smoking shall occur on the property, unless in an approved and designated location.
195

9. Group Activities. For all group activities, there shall be a minimum break of at least 10 minutes between the end of one session and the beginning of the next, except that no minimum separation is required for group activities occurring as a block of programs for the same individuals. For purposes of this subsection, a “block program” means a group or series of services provided in succession to patients within a three-hour period.

10.Modifications. Modifications to the approved use shall be processed pursuant to AVMC 15.74.110.

11.Sign Permit. A sign permit shall be required prior to the placement, movement, erection, reconstruction, alteration or display of any sign permitted pursuant to Chapter 15.34 AVMC. All signs, except where expressly exempt, shall conform to the current California Building and Electrical Codes as adopted by the city of Aliso Viejo.

12.Noise Control. The establishment and operation of the approved use shall comply with AVMC Chapter 8.12 noise standards.

13.Indemnification. The Applicant shall indemnify, protect, defend, and hold the city, and/or any of its officials (appointed or elected), officers, employees, agents, departments, agencies, and instrumentalities thereof, harmless from any and all claims, demands, lawsuits, writs of mandamus, and other actions and proceedings (whether legal, equitable, declaratory, administrative or adjudicatory in nature), and alternative dispute resolution procedures (including, but not limited to arbitrations, mediations, and other such procedures), judgments, orders, and decisions (collectively 'Actions'), brought against the city, and/or any of its officials, officers, employees, agents, departments, agencies, and instrumentalities thereof, that challenge, attack, or seek to modify, set aside, void, or annul, any action of, or any permit or approval issued by the city and/or any of its officials, officers, employees, agents, departments, agencies, and instrumentalities thereof (including actions approved by the voters of the city) for or concerning the project, whether such Actions are brought under the Ralph M. Brown Act, California Environmental Quality Act, Planning and Zoning Law, Subdivision Map Act, Community Redevelopment Law, Code of Civil Procedure Sections 1085 or 1094.5, or any other federal, state, or local constitution, statute, law, ordinance, charter, rule, regulation, or any decision of a court of competent jurisdiction. It is expressly agreed the city shall have the right to approve, which approval will not be unreasonably withheld, legal counsel providing the city's defense, and that Applicant shall reimburse city for any costs and expenses directly and necessarily incurred by the city in the course of the defense. The city shall promptly notify the Applicant of any action brought, and city shall cooperate with the Applicant in defense of the action.
196

14.Actions by City Council. Decisions by the city council are final and shall become effective immediately except as otherwise provided in the approving action and except for actions by ordinance.

15.Expiration. This approval shall expire and be of no further force or effect if:
a. Expiration of Period of Validity. The permit is not established within two years of the permit’s effective date or such other time period designated by the permit approval, by state law, or by this code; or
b. Abandonment. After establishment, the use or activity for which the permit was approved is discontinued or abandoned for a period of one year.

16.Time Extensions. Upon application before expiration of the period of validity, the original decision-making authority may grant or conditionally grant an extension to the period of validity for up to one year per extension if it finds that such an extension is justified by the circumstances of the original findings for the project can still be made with, if necessary, the imposition of conditions not originally imposed on the project. The filing of an application for extension shall stay expiration of the permit until action is taken on the time extension by the decision- making authority. No more than two one-year extensions may be granted or conditionally granted.

17.Revocation. This approval may be revoked by the original decision-making authority pursuant to the provisions of AVMC 15.74.120. 197
ABBREVIATIONS, NOTES,SYMBOLS, INDEX, MAP,BUILDING DATA, ETC.A-0.1 ARCHITECTURAL PLANSA-0.1ABBREVIATIONS, NOTES, SYMBOLS, INDEX, MAP, BUILDING DATA, ETC.A-0.2GENERAL NOTESA-0.3GENERAL NOTES AND SPECIFICATIONSA-0.5ASITE PLAN AND ACCESSIBLE PATH OF TRAVELA-0.5BEXIT ROUTES AND TACTILE SIGNAGEA-0.6ABASE BUILDING ACCESSIBILITYA-0.6BBASE BUILDING ACCESSIBILITYA-0.7BASE BUILDING RESTROOM ACCESSIBILITY PLANSA-0.7ARESTROOM ELEVATIONSA-0.7BRESTROOM ELEVATIONSA-1.0DEMOLITION PLANA-2.0CONSTRUCTION PLANA-3.0POWER / VOICE / DATA PLANA-4.0REFLECTED CEILING PLANA-5.0FINISH PLANA-20.0INTERIOR ELEVATIONS AND MILLWORK DETAILSA-30.0WALL PARTITION DETAILSA-30.2CEILING DETAILSA-30.4GLASS PARTITION DETAILSA-30.5MILLWORK DETAILSELECTRICAL PLANSE-1ELECTRICAL COVER SHEETE-2ELECTRICAL SPECIFICATION PART 1 OF 2E-3ELECTRICAL SPECIFICATIONS PART 2 OF 2E-4.1TITLE 24 ENERGY CALCULATIONSE-4.2TITLE 24 ENERGY CALCULATIONSE-5ELECTRICAL LIGHTING PLANE-6.1ELECTRICAL POWER PLANE-6.2HVAC COORDINATION POWER PLANE-7.1PANEL SCHEDULESE-7.2SINGLE LINE DIAGRAME-8TYPICAL LIGHTING CONTROL DIAGRAMS (WATTSTOPPER)E-9ELECTRICAL DETAILSMECHANICAL PLANSM-1.0HVAC NOTES & DETAILSM-2.0HVAC DEMOLITION PLANM-2.1HVAC PLANM-2.2HVAC ZONING PLANM-3.0TITLE 24M-3.1TITLE 24PLUMBING PLANSP-1.1PLUMBING COVER SHEETP-1.2PLUMBING DETAILSP-1.3PLUMBING CUTSHEETS & TITLE 24 CALCULATIONSP-2.1PLUMBING DEMOLITION PLANP-2.2PLUMBING FIXTURE TYPESP-2.3PLUMBING PLAN - SEWER & VENT PIPINGP-2.4PLUMBING PLAN HOT & COLD WATER PIPINGP-3PLUMBING SPECIFICATIONSKEY PLANLOCATION PLAN27141 ALISO CREEK RD.ALISO VIEJO, CA 92656

PROJECT INFORMATIONDRAWING INDEX
NAS NOTED1.LARGE SCALE DRAWINGS TAKE PRECEDENCE OVER SMALL SCALE DRAWINGS. DETAILS TAKE PRECEDENCE OVER ALL. NOTIFY ARCHITECT OFCONFLICTS OR DISCREPANCIES IN WRITING.2.DIMENSION CONVENTIONS:a)HORIZONTAL DIMENSIONS ARE SHOWN FROM FACE OF FINISH, UNLESS OTHERWISE NOTED.b)DIMENSIONS NOTED "CLEAR" OR "CLR." MUST BE PRECISELY MAINTAINED: ALLOWING FOR THICKNESS ORMATERIALS.c)DIMENSIONS ARE NOT ADJUSTABLE WITHOUT ARCHITECT'S APPROVAL, UNLESS NOTED.d)DIMENSIONS TO EXTERIOR WINDOW WALL ARE TO INSIDE FINISHED FACE OF THE WALL, UNLESS OTHERWISENOTED.e)DIMENSIONS TO EXTERIOR GLAZING ARE TO THE INSIDE FACE OF THE EXTERIOR GLAZING.f)VERTICAL DIMENSIONS ARE FROM THE TOP OF THE FINISHED FLOOR, UNLESS OTHERWISE NOTED.g)DO NOTE SCALE DRAWINGS. IF ANY ITEM OF WORK CANNOT BE LOCATED, DO NOT PROCEED WITH THE WORKBEFORE CLARIFYING WITH ARCHITECT.h)VERIFY DIMENSIONS MARKED "V.I.F." PRIOR TO START OF CONSTRUCTION. REPORT INCONSISTENCIES TOARCHITECT.3.DEFINITION OF TERMINOLOGY:i)"TYPICAL" MEANS IDENTICAL FOR ALL CONDITIONS, UNLESS OTHERWISE NOTED.j)"SIMILAR" MEANS COMPARABLE CHARACTERISTICS FOR THE CONDITIONS NOTED. VERIFY DIMENSIONS ANDORIENTATION ON PLANS AND ELEVATIONS.k)"PROVIDE" MEANS FURNISH AND INSTALL, COMPLETE AND IN PLACE.l)"FURNISH" MEANS FURNISH ONLY, INSTALLATION BY GENERAL CONTRACTOR UNLESS OTHERWISE NOTED.m)"INSTALL" MEANS PUT INTO PLACE, SUPPLIED BY GENERAL CONTRACTOR UNLESS OTHERWISE NOTED.n)"ALIGN" MEANS ACCURATELY LOCATE FINISH FACES IN THE SAME PLANE.DRAFTING CONVENTION NOTESFIRE PREVENTION A8.412A8.412A112A8.4COLUMN GRID LINESWORK POINTCONTROL POINTDATUM POINTMATCH LINESHADED PORTION IS SIDECONSIDEREDDETAIL NUMBERSHEET NUMBERAREA OF DETAILTHICKENED LINESHOWSAREA OF SECTIONDETAILWALL SECTION KEYDETAIL NUMBERSHEET NUMBERVIEW DIRECTIONDRAFTING CONVENTIONSN.I.C.CDAABINTERIOR ELEVATIONDETAIL NUMBERSHEET NUMBERVIEW(S) SHOWNKEYNOTEALIGN SURFACESNO WORK IN THIS AREA(N.I.C.)OWNER FURNISHEDITEM(NOT IN CONTRACT)ADDENDUMADDENDUM LETTERAREA OF REVISIONINSTALLED MILLWORK1REVISIONREVISION NUMBERAREA OF REVISION1.0NNORTHCLCENTER LINE #'"@&ANDANGLEATCENTERLINECHANNELDIAMETER OR ROUNDFOOT (FEET)INCH (INCHES)PERPENDICULARPOUND OR NUMBERSQUARE FOOT (FEET)CLABVABOVEA/CAIR CONDITIONINGACCACCESSACOUSACOUSTICALACTACOUSTIC TILEADJADJUSTABLEADACCESS DOORAFFABOVE FINISHED FLOORALACTIVE LEAFALUMALUMINUMALTALTERNATEANODANODIZEDAPACCESS PANELAPPROX`APPROXIMATEAPPVAPPROVEDARCHARCHITECTURALAUTOAUTOMATICAVGAVERAGEBDBOARDBATT INSULBATTEN INSULATIONBJBUTT JOINTBKGBACKINGBLDGBUILDINGBLKBLOCKBLKGBLOCKINGBMBEAMBMKBENCH MARKBOWBACK OF WALLBOTBOTTOMBRKTBRACKETBTWNBETWEENCABCABINETCLGCEILINGCLKGCAULKINGCLOCLOSETCLRCLEARCOLCOLUMNCONCCONCRETECONFCONFERENCECONNCONNECTIONCONSTRCONSTRUCTIONCONTCONTINUOUSCORRCORRIDORCPTCARPETCSMTCASEMENTCTCERAMIC TILECTRCENTERCWKCASEWORKCFCICONTRACTOR FURNISHEDCONTRACTOR INSTALLEDCIRCIRCULARCJCONTROL JOINTCNTRCOUNTERDBLDOUBLEDEMODEMOLISH (DEMOLITION)DEPTDEPARTMENTDETDETAILDFDRINKING FOUNTAINDIADIAMETERDIM DIMENSIONDISPDISPENSERDIVDIVISIONDNDOWNDODOOR OPENINGDRDOORDWDISH-WASHERDWGDRAWINGDWRDRAWERDIAGDIAGONALEEAST(E)EXISTINGEAEACHELELEVATIONELECELECTRICALELEVELEVATOREMEREMERGENCYENAMENAMELENCLENCLOSUREENGENGINEERENTENTRANCEEQEQUALEQPTEQUIPMENTEWCELECTRIC WATER COOLEREXHEXHAUSTEXPEXPANSIONEXPOEXPOSEDEXTEXTERIORFAFIRE ALARMFDFLOOR DRAINFDCFIRE DEPARTMENT CONNECTIONFDNFOUNDATIONFEFIRE EXTINGUISHERFECFIRE EXTINGUISHER CABINETFFFINISH FACEFHCFIRE HOSE CABINETFINFINISHFIXFIXTUREFLRFLOORFLUORFLUORESCENTFOFACE OFFRPFFIREPROOFFRFIRE RESISTANTFRMGFRAMINGFSFULL SIZEFTFOOT OR FEETFOCFACE OF CONCRETEFOSFACE OF STUDSFOWFACE OF WALLFESFIR EXTINGUISHER SURFACE MOUNTEDFDFLOOR DRAINFURGFURRINGGBGRAB BARGDGARBAGE DISPOSALGENGENERALGLGLASSGNDGROUNDGYPGYPSUMGAGAGE OF GAUGEGALVGALVANIZEDGGASGYP BDGYPSUM WALLBOARDGCGENERAL CONTRACTORHDCPHANDICAPPEDHDFHIGH DENSITY FIBERBOARDHDWDHARDWOODHDWEHARDWAREHMHOLLOW METALHOHOLD OPENHORHORIZONTALHRHOURHRHAND RAILHTHEIGHTHVACHEATING VENTING AIR CONDITIONINGHWHOT WATERHWHHOT WATER HEATERHDRHANDRAILHBDHARDBOARDHTRHEATERHTHEIGHTHCHOLLOW COREHMIHOLLOW METAL INSULATEDINCANINCANDESCENTINCLINCLUDINGINFOINFORMATIONINSULINSULATIONINTINTERIORINTERINTERMEDIATEININCHIDINSIDE DIAMETERIDENTIDENTIFICATIONJANJANITORJBJUNCTION BOXJUNCJUNCTIONJTJOINTJSTJOIST

LTGLIGHTINGLTWTLIGHT WEIGHTLINLINEARLONGLONGITUDINALLPLOW POINTLKRLOCKERLVRLOUVERMAXMAXIMUMMDFMEDIUM DENSITY FIBERBOARDMECHMECHANICALMEDMEDIUMMEMBMEMBRANEMETMETALMEZZMEZZANINEMFRMANUFACTURERMICMICROWAVEMINMINIMUMMIRMIRRORMISCMISCELLANEOUSMULMULLIONMACHMACHINEMAINTMAINTENANCEMSTCMASTICMATLMATERIALMTMETALTHRESHOLDMLDGMOLDINGMTDMOUNTEDNNORTHNNEWNATNATURALNICNOT IN CONTRACTNONUMBERNOMNOMINALNRCNOISE REDUCTION COEFFICIENTNTSNOT TO SCALEOCON CENTERODOUTSIDE DIAMETER DIMENSIONOFCIOWNER FURNISHED CONTRACTOR INSTALLEDOHOPPOSITE HANDOPNGOPENINGOVHDOVERHEADOFFOFFICEOFOIOWNER FURNISHEDOWNER INSTALLEDPPAINTPARPARALLELPBDPARTICLE BOARDPCPERSONAL COMPUTERPCPIECEPERPPERPENDICULARPLPLATEPLAMPLASTIC LAMINATEPLASPLASTERPLYWDPLYWOODPNLPANELPOLPOLISHPRPAIRPTNPARTITIONPTDPAPER TOWEL DISPENSERPTDRPAPER TOWEL DISPENSER RECEPTACLEPTRPAPER TOWEL RECEPTACLEPLBGPLUMBINGPTPOINTLBSPOUNDSPSFPOUND SQUARE FOOTPSIPOUND SQUARE INCHPRCSTPRECASTPREFABPREFABRICATEDPROJPROJECTIONQTYQUANTITYQUALQUALITYQTQUARRY TILEQTRSQUARTERSRRISERRRELOCATEDRARETURN AIRRADRADIUSRBRESILIENT BASEREBARREINFORCING BARREFREFERENCEREFLREFLECTEDREFRREFRIGERATORREINFREINFORCEDREQREQUIREDRESILRESILIENTREVREVISION / REVISEDRHRIGHT HANDRMROOMROROUGH OPENINGRTRESILIENT TILERUBRUBBERRNDROUNDRBRUBBER BASESSOUTHSASUPPLY AIRSCSOLID CORESCHSCHEDULESFECSEMI-RECESSED FIRE EXTINGUISHER CABINETSHTSHEETSIMSIMILARSKSINKSMDSEE MECHANISNDSANITARY NAPKIN DISPENSORSNRSANITARY NAPKIN RECEPTACLESPDSEE PLUMBING DRAWINGSSPECSPECIFICATION (S)SPKRSPEAKERSQSQUARESSDSEE STRUCTURAL DRAWINGSSTDSTANDARDSTLSTEELSTORSTORAGESTRLSTRUCTURALSURSURFACESUSPSUSPENDEDSYMSYMMETRICALSYSSYSTEMSCDSEAT COVER DISPENSERSECTSECTIONSSKSERVICE SINKSDSOAP DISPENSERSMSHEET METALSTASTATIONTTREADTANTANGENTTBDTO BE DETERMINEDTELTELEPHONETEMPTEMPEREDTHRESTHRESHOLDTHRUTHROUGHTOTOP OFTPDTOILET PAPER DISPENSERTVTELEVISIONTYPTYPICALTEMPTEMPERATURETERTERRAZZOTOILTOILETTOCTOP OF CONCRETETCTOP OF CURBTOSTOP OF STEELTSTUBULAR STEELTWTOP OF WALLTBTOWEL BARUNFUNFINISHEDUONUNLESS OTHERWISE NOTEDURURINALUTILUTILITYULUNDERWRITERS LABORATORIESVARVARIABLEVIFVERIFY IN FIELDVINVINYLVERTVERTICALVESTVESTIBULEVCTVINYL COMPOSITION TILEVWCVINYL WALL COVERINGWWESTWWITHWCWALL COVERINGWCWATER CLOSETWDWOODWINWINDOWWOWHERE OCCURSWOWITHOUTWPWATERPROOFWPTWORK POINTWRWATER RESISTANTWSWEATHERSTRIPINGWTWEIGHTWNSCTWAINSCOTWDTWIDTHKKEYKLKEY LOCKKPKICK PLATEKIT KITCHENLAMLAMINATELAVLAVATORYLHLEFT HANDEDLABLABORATORYLTLIGHT

ABBREVIATIONS

XXXXTYPICAL MOUNTING HEIGHT ELEVATION
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:STAMP AND SIGNATURE:CONSULTANTS:DATEDESCRIPTION DELTADRAWINGS ISSUE08/16/24ISSUE FOR ENGINEERING6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA08/29/24ISSUE FOR PLAN CHECKCONTACT DIRECTORYARCHITECT:SAA INTERIORS AND ARCHITECTUREPHONE:949-608-3748CONTACT:MICHAEL PARREMAIL:[email protected] ENGINEER:ENGINEERED SPACES, INC.333 CITY BLVD. WEST, SUITE 300ORANGE, CA 92868OFFICE: 714-449-1646CELL: 949-290-8487CONTACT:SORIN A. BRIEEMAIL:[email protected] DOOR HANDLEWALL MOUNTED F.L.S. STROBE DEVICE.CASEWORK MOUNTING HEIGHTSCERTAIN ELEVATION DIMENSIONS AREASSOCIATED WITH CODE REQUIRED MAXIMUMOR MINIMUM MOUNTING HEIGHTS. SUCHDIMENSIONS SHOULD BE HELD DESPITEVARIATIONS IN THE SLAB. CODE DIMENSIONSARE IN PARENTHESIS WITH AN ASTERISK NEXTTO THE CRITICAL DIMENSION. E.G.: (* +15" MIN.)CONTROL ELEVATIONS ARE COMPRISED OF:FINISH CEILING LEVEL (FCL)FINISH FLOOR LEVEL (FFL)TOP OF SLAB (TOS)ALL DIMENSIONS GIVEN ARE FROM FFL DATUM.FINISH FLOOR MATERIAL IS ASSUMED TO BE 3/8"THICK GLUE DOWN CARPET. FLOOR FINISH ANDTHICKNESS WILL VARY FROM LOCATION TOLOCATION. REFER TO PLANS AND DETAILS FORSPECIFIC FLOORING INFORMATION.NO ALLOWANCE HAS BEEN MADE FOR ANYDEPRESSIONS OR ELEVATIONS IN THE SLAB.ELEVATION HEIGHTS SHOULD TAKE INTOACCOUNT ANY VARIATIONS IN THE FLOOR SLAB.ELECTRICAL MOUNTING HEIGHTSCONTROL ELEVATIONSKEY CARD READER OR THERMOSTATCLG. HT.+60"BOT. OF CASEWORK OVHDS.(* +2'-10" MAX.)COUNTER +2'-10"+2'-6"CASEWORK DESKJ BOX AT DESK +21"TYP. J-BOX OUTLET +18"*COAT CLOSET SHELF +48"+34"-44"DOOR HANDLEFIN. FLR. 0'- 0"FIRE EXTINGUISHER CABINET, SEE A2.0FOR TYPE. PAINT CABINET TO MATCHADJACENT WALL. PROVIDE NEW FIREEXTINGUISHER SUSPENDED IN CABINETCLCLADJUST CENTERLINE DIMENSION TO 12" ASREQUIRED TO ACCOMMODATE MULTIPLEGANGED DEVICESWALL SWITCH, DIMMER OR WALL MOUNTEDMOTION SENSOR, WALL PHONES AND "J"BOXES AT COUNTERS. MULTIPLE SWITCHES TOBE GANGED INTO ONE COVER PLATE.ELECT. WALL OUTLET. MULTIPLE OUTLETS TOBE GANGED INTO ONE COVER PLATE.CLDIMENSION SHOWN FOR REFERENCE ONLY.FINAL LOCATION TO BE APPROVED BY SAAAND/OR TENANT.1'-6"44" A.F.F. MAX TO TOP OF BOX+80"-96" A.F.F.6"MIN. CLR.6"12"

1.BUILDING PERMIT INFORMATIONBUILDING27141 ALISO CREEK RD.ADDRESS:ALISO VIEJO, CA 92656BUILDING OWNER:DON WILSON BUILDERS23705 CRENSHAW BLVD., SUITE 200TORRANCE, CA 90505OFFICE:310-539-9902FAX:310-539-2876OFFICE:714-308-2700NAME: JOHN CASKEYEMAIL:[email protected] TYPE:V-BOCCUPANCY:B-OFFICESPRINKLER BUILDING:FULLY SPRINKLEREDNUMBER OF FLOORS:2TOTAL FLOOR AREA:19,043 SQ. FT.AREA OF WORK:18,096 SQ. FT.SCOPE OF WORK:TENANT IMPROVEMENT WORK ON 18,096 SQ. FT. OF THE TOTALFLOOR AREA. NEW WALL, POWER, LIGHTING AND FINISHES.2.C.E.C. TITLE 24/DISABLE ACCESS COMPLIANCETHE PROJECT SHALL COMPLY WITH CCR TITLE 24 (PART 6 - CALIFORNIA ENERGY CODE) FOR ENERGY COMPLIANCE FORDISABLED ACCESS REQUIREMENTS.3.EXISTING LIFE-SAFETY SYSTEMS TO BE MODIFIEDEXISTING FIRE/LIFE SAFETY SYSTEM IS TO BE MODIFIED TO COMPLY TO CURRENT FIRE/LIFE SAFETY STANDARDS. REFERTO ELECTRICAL ENGINEER DRAWING FOR SCOPE OF WORK.4.CODE COMPLIANCETHE PROJECT SHALL COMPLY WITH CODES, ORDINANCES, OR LAWS HAVING JURISDICTION ON THE PROJECT. WHICHINCLUDE, BUT ARE NOT LIMITED TO: 2022 CALIFORNIA BUILDING CODE - ( PART 2, TITLE 24, CCR ) 2022 CALIFORNIA ELECTRICAL CODE- ( PART 3, TITLE 24, CCR ) 2022CALIFORNIA MECHANICAL CODE- ( PART 4, TITLE 24, CCR ) 2022 CALIFORNIA PLUMBING CODE- ( PART 5, TITLE 24, CCR ) 2022 CALIFORNIA FIRE CODE- (PART 9, TITLE 24, CCR ) 2022 CALIFORNIA BUILDING STANDARDS CODE ( PART 12, TITLE 24, CCR )5. SEPARATE PERMITSPROVIDE SEPARATE PERMITS FOR THE FIRE SPRINKLER AND FIRE PROTECTION.1.EXIT DOORS SHALL SWING IN THE DIRECTION OF EXIT TRAVEL WHEN SERVING ANY HAZARDOUS AREA OR WHENSERVING AN OCCUPANT LOAD OF 50 OR MORE.2.EXIT DOORS SHALL BE OPERABLE FROM THE INSIDE WITHOUT THE USE OF A KEY OR ANY SPECIAL KNOWLEDGE OREFFORT. (2022 CBC 1010.2).3.EXCEPTION: THIS REQUIREMENT SHALL NOT APPLY TO EXTERIOR EXIT DOORS IN A GROUP "B" OCCUPANCY IF THEREIS A VISIBLE, DURABLE SIGN ON OR ADJACENT TO THE DOOR STATING "THIS DOOR TO REMAIN UNLOCKED WHENSPACE IS OCCUPIED". THE LETTERS SHALL BE NOT LESS THAN 1 INCH HIGH ON A CONTRASTING BACKGROUND. THELOCKING DEVICE MUST BE A TYPE THAT WILL BE READILY DISTINGUISHABLE AS LOCKED.4.PANIC HARDWARE, WHEN INSTALLED, SHALL COMPLY WITH ALL APPLICABLE BUILDING CODE REQUIREMENTS. THEACTIVATING MEMBER SHALL BE MOUNTED AT A HEIGHT OF NOT LESS THAN 34 INCHES NOR MORE THAN 44 INCHESABOVE THE FLOOR. THE UNLATCHING FORCE SHALL NOT EXCEED 15 POUNDS WHEN APPLIED IN THE DIRECTION OFEXIT TRAVEL.5.THE MEANS OF EGRESS, INCLUDING THE EXIT DISCHARGE SHALL BE ILLUMINATED AT ALL TIMES THE BUILDINGSPACE SERVED BY THE MEANS OF EGRESS IS OCCUPIED. THE MEANS OF EGRESS ILLUMINATION LEVEL SHALL NOT BELESS THAN 1 FOOT-CANDLE (11-LUX) AT THE WALKING SURFACE LEVEL. (2022 CBC 1008.1, 1008.2 AND 1008.2.1)6.EXIT ILLUMINATION SHALL COMPLY WITH 2022 CBC SECTION 1008 AND 1013.7.EXIT SIGNS SHALL BE INSTALLED AT REQUIRED EXIT DOORWAYS AND WHERE OTHERWISE NECESSARY TO CLEARLYINDICATE THE DIRECTION OF EGRESS WHEN THE EXIT SERVES AN OCCUPANT LOAD OF 50 OR MORE.8.EXCEPTION: MAIN EXTERIOR EXIT DOORS WHICH OBVIOUSLY AND CLEARLY ARE IDENTIFIABLE AS EXITS NEED NOT BESIGNED WHEN APPROVED BY THE BUILDING OFFICIAL.9.WHEN NECESSARY, THE FINAL LOCATION AND QUANTITY OF EXIT SIGNS SHALL BE DETERMINED BY THE FIREDEPARTMENT PRIOR TO CONSTRUCTION OF ANY WORK.10.THE COLOR AND DESIGN OF LETTERING, ARROWS AND OTHER SYMBOLS ON EXIT SIGN SHALL BE IN HIGH CONTRASTWITH THEIR BACKGROUND (3/4" x 6" LETTERS MIN.)11.ALL RATED CORRIDOR DOORS SHALL HAVE A THRESHOLD WITH A SMOKE AND DRAFT SEAL AT HEAD AND JAMBS.12.INTERIOR WALL AND CEILING FINISHES SHALL BE NON-COMBUSTIBLE OR HAVE A FLAME SPREAD INDEX OF 0 TO 25;SMOKE-DEVELOPED INDEX 0-450.13.ALL DRAPES, HANGING CURTAINS AND OTHER DECORATIVE MATERIALS SHALL BE TREATED AND MAINTAINED IN AFLAME RETARDANT CONDITION.14.FIRE DAMPERS OR DOORS SHALL BE PROVIDED WHERE AIR DUCTS PENETRATE FIRE RATED WALLS OR CEILING ASPER 2022 CBC SECTION 716. SMOKE DAMPERS SHALL BE PROVIDED WHERE AIR DUCTS PENETRATE FIRE RATEDWALLS OR CEILING AS PER 2022 CBC SECTION 716.15.IF THE BUILDING IS EQUIPPED WITH A FIRE SPRINKLER SYSTEM OR HAS A FIRE/LIFE SAFETY SYSTEM, EXTEND/MODIFYFIRE/LIFE SAFETY SYSTEM AS REQUIRED.16.IF THE BUILDING IS EQUIPPED WITH A FIRE SPRINKLER SYSTEM OR HAS A FIRE/LIFE SAFETY SYSTEM, EXTEND FIRESPRINKLERS SYSTEMS AS REQUIRED.17.IF THE BUILDING IS EQUIPPED WITH A FIRE SPRINKLER SYSTEM OR HAS A FIRE/LIFE SAFETY SYSTEM, FIRESPRINKLER/OR LIFE SAFETY PLANS MUST BE SUBMITTED TO THE CITY FOR REVIEW AND APPROVAL PRIOR TOBUILDING PERMIT ISSUANCE.18.IF THE BUILDING IS EQUIPPED WITH A FIRE SPRINKLER SYSTEM OR HAS A FIRE/LIFE SAFETY SYSTEM, FIRE SPRINKLERSYSTEM PLAN MUST BE REVISED AND APPROVED BY THE CITIES FIRE DEPARTMENT PRIOR TO THE INSTALLATION ORMODIFICATION OF SPRINKLER SYSTEMS.19.A PORTABLE FIRE EXTINGUISHER WITH A MINIMUM 2A10BC RATING SHALL BE PROVIDED EVERY 75' OF TRAVELDISTANCE FROM ANY POINT WITHIN THE AREA DEFINED AS SCOPE OF WORK PER THESE PLANS. PROVIDE FIREEXTINGUISHERS AS REQUIRED BY FIRE DEPARTMENT FIELD INSPECTOR.20.ALL EMERGENCY LIGHTING SOURCES SHALL EMIT A MINIMUM VALUE OF ONE FOOT CANDLE MEASURED AT FLOORLEVEL.21.PROVIDE EMERGENCY NOTIFICATION SYSTEM FOR THE HEARING AND VISUAL IMPAIRED PER A.D.A. REQUIREMENTS.NOTES:1.ALL VERTICAL DIMENSIONS ARE SHOWNFROM FINISH FLOOR TO LOCATION SHOWN.2.THE THERMOSTAT AND CARD READERSSHALL BE LOCATED SO THAT THE TOP OFTHE OUTLET BOX IS NO MORE THAN 48"NOR LESS THAN 15" TO THE BOTTOM OFTHE OUTLET BOX ABOVE THE FINISHEDFLOOR (2022 CBC 11B-308.2.1).

SITE LOCATIONNSCOPE OF WORK
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
198
GENERAL NOTESA-0.2

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA01 00 00 GENERAL REQUIREMENTS01 11 00 - SUMMARY OF WORK1TENANT IMPROVEMENT WORK ON 18,096 SQ. FT. OF THE TOTAL FLOOR AREA. NEW WALL, POWER, LIGHTING ANDFINISHES.2THE AMERICAN INSTITUTE OF ARCHITECTS GENERAL CONDITIONS OF THE CONTRACT FOR CONSTRUCTION, AIA FORMA-201 CURRENT EDITION, SHALL APPLY TO ALL WORK IN THIS CONTRACT, EXCEPT AS SPECIFICALLY MODIFIED BELOWAND/OR BY THE OWNER/CONTRACTOR AGREEMENT.3THE GENERAL CONTRACTOR SHALL NOTIFY SHLEMMER+ALGAZE+ASSOCIATES (SAA) IMMEDIATELY IF HE CANNOTCOMPLY WITH ALL WORK CALLED FOR ON THESE DRAWINGS.4THE GENERAL CONTRACTOR SHALL NOTIFY SAA IMMEDIATELY OF ANY DISCREPANCIES OR OMISSIONS BETWEEN THEDRAWINGS, THESE NOTES, AND FIELD CONDITIONS BEFORE COMMENCING ANY WORK AND REQUEST CLARIFICATION.5ALL SAA DRAWINGS AND ALL CONSTRUCTION NOTES ARE COMPLEMENTARY, AND WHAT IS CALLED FOR BY EITHERWILL BE BINDING AS IF CALLED FOR BY ALL. ANY WORK SHOWN OR REFERRED TO ON ANY ONE SET OF DRAWINGSSHALL BE PROVIDED AS THOUGH SHOWN ON ALL RELATED DRAWINGS.6INSURANCE AND BONDING FOR THE PROJECT SHALL BE AS DIRECTED BY AND TO THE SATISFACTION OF THE OWNER,AND AS REQUIRED IN THE OWNER-CONTRACTOR AGREEMENT.01 23 00 - ALTERNATES1ALL ASSEMBLIES OR DETAILS MARKED AS ALTERNATES TO BASE REQUIREMENTS SHALL BE PRICED INDIVIDUALLY. NOTETHAT ALTERNATES MAY BE EITHER ADDITIVE OR DEDUCTIVE. BID FORM SHALL ITEMIZE ALL ALTERNATES.01 25 00 - SUBSTITUTION PROCEDURES1THE GENERAL CONTRACTOR SHALL HAVE TEN WORKING DAYS FROM AWARD OF THE CONTRACT TO SUBMITSUBSTITUTIONS, ON FORM APPROVED BY SAA, OF SPECIFIED PRODUCTS OR WORK FOR REVIEW BY SAA. CONTRACTORSHALL INCLUDE CUT SHEETS WITH SPECIFICATIONS AND REASONS FOR SUBSTITUTION. SAA SHALL RESPOND IN TENWORKING DAYS FROM RECEIPT OF SUBMITTAL AS TO ACCEPTANCE OR REJECTION OF PROPOSED SUBSTITUTION. NOREQUEST FOR SUBSTITUTIONS SHALL BE REVIEWED OR ACCEPTED AFTER THE INITIAL TIME LIMIT HAS PASSED.01 26 00 - CONTRACT MODIFICATION PROCEDURES1THE OWNER WITHOUT INVALIDATING THE CONTRACT MAY ORDER EXTRA WORK OR MAKE CHANGES BY ALTERING,ADDING TO OR DEDUCTING FROM THE WORK. THE CONTRACT SUM SHALL BE ADJUSTED ACCORDINGLY. ALL SUCHWORK SHALL BE EXECUTED UNDER THE CONDITIONS OF THE ORIGINAL CONTRACT EXCEPT THAT ANY CLAIM FOREXTENSIONS OF TIME CAUSED THEREBY SHALL BE ADJUSTED AT THE TIME OF ORDERING SUCH CHANGE.2IF THE GENERAL CONTRACTOR DETERMINES THAT ANY REVISION TO DRAWINGS INVOLVE EXTRA COST UNDER THISCONTRACT, HE SHALL GIVE SHLEMMER+ALGAZE+ASSOCIATES WRITTEN NOTICE THEREOF WITHIN AREASONABLEAMOUNT OF TIME AFTER RECEIPT OF SUCH INSTRUCTIONS. THE REQUEST SHALL INCLUDE A COMPLETE DESCRIPTIONOF THE WORK BEING PERFORMED, LOCATION OF THE WORK, MATERIALS BEING USED, AND ANY OTHER COSTS. BEFOREPROCEEDING TO EXECUTE THE WORK, THE PROCEDURE SHALL BE AS PROVIDED FOR IN THE OWNER-CONTRACTORAGREEMENT. NO EXTRA COSTS SHALL BE VALID UNLESS APPROVED IN WRITING BY THE OWNER AND ARCHITECT.UNLESS OTHERWISE AGREED, NO PAYMENT WILL BE MADE WITHOUT WRITTEN APPROVAL.01 29 00 - PAYMENT PROCEDURES1THE GENERAL CONTRACTOR SHALL SUBMIT ALL APPLICATIONS FOR PAYMENT TO THE OWNER OR OWNER DESIGNATEDAGENT FOR REVIEW AND APPROVAL. THE FORM OF THE APPLICATION FOR PAYMENT SHALL BE AIA DOCUMENT G702,SUPPORTED BY AIA DOCUMENT G702A CONTINUATION SHEET. A 10% RETAINAGE OF EACH APPLICATION FORPAYMENT SHALL BE WITHHELD BY THE OWNER UNTIL RELEASE OF FINAL PAYMENT UNLESS NOTED OTHERWISE IN THEAGREEMENT BETWEEN THE OWNER AND CONTRACTOR.01 31 00 - PROJECT MANAGEMENT AND COORDINATION1INTENT OF THE DRAWINGS IS TO SHOW EXISTING BUILDING CONDITIONS WITH INFORMATION DEVELOPED FROMAVAILABLE DOCUMENTS. CONTRACTOR SHALL MAKE A DETAILED SURVEY OF EXISTING CONDITIONS PERTAINING TOTHE WORK BEFORE COMMENCING ANY DEMOLITION OR NEW CONSTRUCTION. THE CONTRACTOR SHALL REPORTDISCREPANCIES BETWEEN DRAWINGS AND ACTUAL FIELD CONDITIONS TO THE ARCHITECT.2LARGE SCALE DRAWINGS TAKE PRECEDENCE OVER SMALL SCALE DRAWINGS. DETAILS TAKE PRECEDENCE OVER ALL.NOTIFY ARCHITECT OF CONFLICTS OR DISCREPANCIES IN WRITING.3DIMENSION CONVENTIONS:A)HORIZONTAL DIMENSIONS ARE SHOWN FROM FACE OF FINISH, UNLESS OTHERWISE NOTED.B)DIMENSIONS NOTED "CLEAR" OR "CLR." MUST BE PRECISELY MAINTAINED: ALLOWING FOR THICKNESS OFMATERIALS.C)DIMENSIONS ARE NOT ADJUSTABLE WITHOUT ARCHITECT'S APPROVAL, UNLESS NOTED.D)DIMENSIONS TO EXTERIOR WINDOW WALL ARE TO INSIDE FINISHED FACE OF THE WALL, UNLESS OTHERWISENOTED.E)DIMENSIONS TO EXTERIOR GLAZING ARE TO THE INSIDE FACE OF THE EXTERIOR GLAZING.F)VERTICAL DIMENSIONS ARE FROM THE TOP OF THE FINISHED FLOOR, UNLESS OTHERWISE NOTED.G)DO NOT SCALE DRAWINGS. IF ANY ITEM OF WORK CANNOT BE LOCATED, DO NOT PROCEED WITH THE WORKBEFORE CLARIFYING WITH ARCHITECT.H)VERIFY DIMENSIONS MARKED "V.I.F." PRIOR TO START OF CONSTRUCTION. REPORT INCONSISTENCIES TOARCHITECT.4DEFINITION OF TERMINOLOGY:I)"TYPICAL" MEANS IDENTICAL FOR ALL CONDITIONS, UNLESS OTHERWISE NOTED.J)"SIMILAR" MEANS COMPARABLE CHARACTERISTICS FOR THE CONDITIONS NOTED.K)"PROVIDE" MEANS FURNISH AND INSTALL, COMPLETE AND IN PLACE.L)"FURNISH" MEANS FURNISH ONLY, INSTALLATION BY GENERAL CONTRACTOR UNLESS OTHERWISE NOTED.M)"INSTALL" MEANS PUT INTO PLACE, SUPPLIED BY GENERAL CONTRACTOR UNLESS OTHERWISE NOTED.N)"ALIGN" MEANS ACCURATELY LOCATE FINISH FACES IN THE SAME PLANE.5BEFORE SUBMITTING A PROPOSAL, ALL CONTRACTORS SHALL VISIT THE PREMISES, FAMILIARIZE THEMSELVES WITHEXISTING CONDITIONS AND SATISFY THEMSELVES AS TO THE NATURE AND SCOPE OF THE WORK AND THE DIFFICULTIESTHAT ATTEND TO ITS EXECUTION. CONTRACTOR SHALL REVIEW THE CONSTRUCTION DOCUMENT AND MAKE THEOWNER AWARE OF REQUIRED ITEMS THAT ARE MISSING FROM THE CONSTRUCTION DOCUMENTS. IF REQUIRED ITEMSARE MISSING, THE CONTRACTOR SHALL BRING THESE ITEMS TO THE ATTENTION OF THE OWNER DURING THE BIDDINGPERIOD.6THE SUBMISSION OF A PROPOSAL SHALL BE CONSTRUED AS EVIDENCE THAT SUCH AN EXAMINATION HAS BEEN MADEAND LATER CLAIMS FOR LABOR, EQUIPMENT, OR MATERIAL REQUIRED FOR DIFFICULTIES ENCOUNTERED, WHICHCOULD HAVE BEEN FORESEEN HAD SUCH AN EXAMINATION BEEN MADE, WILL NOT BE RECOGNIZED.7CONTRACTOR SHALL CHECK AND VERIFY ALL DIMENSIONS AND CONDITIONS AT THE JOB SITE AS IT RELATES TO THEIRWORK AND THE WORK OF THEIR SUBCONTRACTORS. VERIFY DIMENSIONS AND ORIENTATION ON PLANS ANDELEVATIONS. WRITTEN DIMENSIONS GOVERN, DO NOT SCALE DRAWINGS.8THE GENERAL CONTRACTOR SHALL PROVIDE TO ALL SUBCONTRACTORS COMPLETE SETS OF WORKING DRAWINGS ORASSUME FULL RESPONSIBILITY FOR COORDINATION OF WORK WHEN COMPLETE SETS ARE NOT AVAILABLE TOSUBCONTRACTOR.9MANUFACTURERS NAME, TRADEMARK, LOGOS, ETC., SHALL NOT BE VISIBLE TO THE PUBLIC.10ALL FINISH CONTRACTORS TO FIELD VERIFY SIZE OF ROOMS AND WALLS PRIOR TO PLACING ORDERS OR SUBMITTINGBIDS.11THESE DRAWINGS ARE FOR DESIGN INTENT. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO VERIFY SITECONDITIONS, AND INFORM SAA OF ANY CONFLICTS OR ANY ADDITIONAL WORK NECESSARY TO PROVIDE A COMPLETEFINISHED PROJECT, PRIOR TO SUBMITTING BIDS.12ARCHITECTURAL DOCUMENTS SUPERSEDE ENGINEERING DRAWINGS. IN THE EVENT A DISCREPANCY OCCURS THAT HASAESTHETIC RAMIFICATIONS, CONTACT THE ARCHITECT FOR CLARIFICATION.13THE GENERAL CONTRACTOR SHALL VERIFY SIZE, ELECTRICAL REQUIREMENTS, LOCATION AND CHARACTERISTICS OF ALLWORK AND/OR EQUIPMENT SUPPLIED BY THE OWNER OR OTHERS, WITH THE MANUFACTURER OR SUPPLIER PRIOR TOTHE START OF RELATED WORK.14THE GENERAL CONTRACTOR AGREES TO PAY ALL TRANSPORTATION CHARGES ON ALL MATERIAL OR EQUIPMENT TOTHE POINT OF USE, AND SHALL BE RESPONSIBLE FOR ALL UNLOADING, CHECKING AND STORING OF SAME INCONNECTION WITH THIS CONTRACT. OWNER WILL ONLY PAY FOR INSTALLED PRODUCTS AND EQUIPMENT.01 32 00 - CONSTRUCTION PROGRESS DOCUMENTATION1PRIOR TO BEGINNING ANY WORK THE GENERAL CONTRACTOR SHALL FURNISH A CONSTRUCTION SCHEDULE SHOWINGTHE CHRONOLOGICAL PHASE OF HIS WORK AND ALL RELATED WORK FOR THE COMPLETION OF THE PROJECT. THISSCHEDULE SHALL INDICATE ALL ORDERING LEAD TIMES, LENGTH OF TIME FOR EACH PHASE, ITS START ANDCOMPLETION, WITH A PROJECTED COMPLETION DATE. CONTRACTOR TO VERIFY AVAILABILITY OF ALL PRODUCTSSPECIFIED AND NOTIFY ARCHITECT IMMEDIATELY IF THERE ARE ANY DISCREPANCIES WITH PROJECT COMPLETION DATE.PRODUCTS MAY REQUIRE A LONG LEAD TIME. CONTRACTOR SHALL TAKE INTO ACCOUNT IN HIS SCHEDULE ALL LONGLEAD ITEMS, AND PLAN ACCORDINGLY SO AS TO NOT DELAY COMPLETION OF THE PROJECT.2THE GENERAL CONTRACTOR IS WHOLLY RESPONSIBLE FOR THE COORDINATION AND SCHEDULING OF THE WORKEFFORT FOR ALL SUBCONTRACTORS, CRAFTSMAN AND TRADESMAN REQUIRED TO COMPLETE THE JOB.3THE CONTRACTOR SHALL CONTACT THE BUILDING MANAGEMENT TO DETERMINE THE REQUIREMENTS OF THEBUILDING OWNER TO DETERMINE WHEN AND HOW DELIVERIES CAN BE MADE (SEE BELOW), WHAT PHASES OFCONSTRUCTION CAN BE DONE ON REGULAR OR OVERTIME, AND IN GENERAL ANY SPECIAL BUILDING REQUIREMENTSWHICH WILL AFFECT THEIR WORK (IF OVERTIME WORK IS REQUIRED BY ANY TRADE, APPROVAL MUST BE OBTAINEDPRIOR TO THE EXECUTION OF ANY WORK INCLUDING COST). THE GENERAL INTENT IS THAT ALL CONSTRUCTION WORKSHALL BE DONE ON REGULAR TIME EXCEPT FOR NOISE GENERATING CONSTRUCTION.4CONTRACTOR SHALL MAKE ALL REQUIRED ARRANGEMENTS FOR DELIVERY OF EQUIPMENT AND/OR MATERIALS. ITSHALL BE THE RESPONSIBILITY OF THE CONTRACTOR TO CHECK THE RULES AND REGULATIONS GOVERNING WORK ONTHE PREMISES, INCLUDING THE FOLLOWING:A) DATE AND TIME OR DELIVERY SHALL BE ESTABLISHED IN CONJUNCTION WITH THE PERSON HAVING JURISDICTIONOVER PREMISES. OVERTIME CHARGES AND/OR ANY NECESSARY EXPENSE SHALL BE PAID BY CONTRACTOR.B)BUILDING CONDITIONS, INCLUDING SIZE AND LOADING CAPACITY OF ELEVATORS, SIZE OF DOORWAYS, CORRIDORS,WINDOW OPENINGS, ETC., SHALL BE CHECKED BY THE CONTRACTOR BEFORE DELIVERY TO ASSURE ITEMS WILL FITINTO SPACE.C)ALL CHARGES INVOLVING THE INSTALLATION AND/OR OPERATION OF A HOIST SYSTEM, IF REQUIRED, SHALL BEBORNE BY THE CONTRACTOR. CHARGES INVOLVING THE TEMPORARY REMOVAL AND REINSTALLATION OFWINDOW SASH AND/OR FIXED PANELS REQUIRED FOR DELIVERY SHALL BE BORNE BY THE CONTRACTOR.5THE GENERAL CONTRACTOR, HIS SUBCONTRACTOR AND ANY OTHER CONTRACTOR INVOLVED IN THIS PROJECT SHALLTAKE NOTE THAT ANY COST CAUSED BY DEFECTIVE OR ILL-TIMED WORK AS A RESULT OF, BUT NOT LIMITED TOINFERIOR WORKMANSHIP OR MATERIALS, IMPROPER SCHEDULING OR DELINQUENT ORDERING SHALL BE BORNE BYTHE PARTY RESPONSIBLE THEREFORE. 6WHERE SPECIAL ITEMS REQUIRE EXTENDED LEAD TIME PREVENTING INSTALLATION BY PROJECTED MOVE IN DATE,CONTRACTOR IS TO PROPOSE AN AVAILABLE ALTERNATE FOR APPROVAL BY SAA AND OWNER AS WELL AS TO PREPAREPRICING FOR POSSIBLE TEMPORARY ASSEMBLIES.01 33 00 - SUBMITTAL PROCEDURES1THE GENERAL CONTRACTOR SHALL PROVIDE SUBMITTALS FOR REVIEW AND APPROVAL BY SAA. CONTRACTOR SHALLSUBMIT THREE (3) SAMPLES OF THE SPECIFIED MATERIALS. SUBMITTALS SHALL INCLUDE BUT NOT BE LIMITED TO THEFOLLOWING: 9” X 12” BRUSH-OUT SAMPLES OF ALL PAINT COLORS SPECIFIED, SAMPLES OF ALL CARPETS, ALL SPECIFIEDFLOOR AND BASE MATERIALS, SAMPLES OF ALL WALL FINISHES, SAMPLES OF SPECIFIED CABINET FINISHES, SAMPLES OFCEILING GRID AND CEILING TILE, CUTSHEETS OF LIGHTING FIXTURES, DOOR/FRAME AND BUILDERS HARDWARE,CASEWORK SHOP DRAWINGS, CASEWORK HARDWARE SUBMITTALS, AND ANY OTHER MATERIALS SPECIFIED.2THE GENERAL CONTRACTOR SHALL SUBMIT ALL FABRICATION SHOP DRAWINGS AND EQUIPMENT/FIXTURE CUTSHEETSTO SAA FOR REVIEW. CONTRAQCTOR SHALL PROVIDE THREE (3) COPIES. SAA SHALL HAVE TEN (10) WORK DAYS FORSHOP DRAWING REVIEW TURNAROUND TIME FROM DATE OF RECEIPT. ALL SHOP DRAWINGS AND CUTSHEETS MARKED"REVIEWED" SHALL SUPERSEDE ORIGINAL DRAWINGS IN DESIGN APPEARANCE ONLY. CONTRACTOR SHALL ASSUMERESPONSIBILITY FOR ERRORS IN THEIR DRAWINGS.3THE USE OF THE WORDS "PROVIDE" OR "PROVIDED" IN CONNECTION WITH ANY ITEM SPECIFIED IS INTENDED TOMEAN, UNLESS OTHERWISE NOTED, THAT WHICH SHALL BE FURNISHED AND INSTALLED, AND CONNECTED WHERE SOREQUIRED.4WHERE THE TERMS “NO EXCEPTION”, "APPROVED EQUAL", "OTHER APPROVED", "EQUAL TO", "ACCEPTABLE" OR ANYOTHER GENERAL QUALIFYING TERMS ARE USED IN THESE NOTES, IT SHALL BE UNDERSTOOD THAT REFERENCE IS MADETO THE SOLE INTERPRETATION AND JUDGMENT OF SAA.01 35 00 - SPECIAL PROCEDURES - HEALTH, SAFETY1SHLEMMER+ALGAZE+ASSOCIATES IS UNAWARE OF ANY EXISTING ASBESTOS WITHIN THE AREA OF NEW WORK. IT ISTHE OWNER'S RESPONSIBILITY TO ADVISE THE GENERAL CONTRACTOR & HIS SUBS OF ANY ASBESTOS CONTAININGMATERIAL OR OTHER HAZARDOUS MATERIALS WITHIN THE FACILITY AND TO PROPERLY REMEDIATE. THE GENERALCONTRACTOR SHALL TAKE ALL NECESSARY PRECAUTIONS REQUIRED BY LAW TO PROTECT ALL WORKERS & OCCUPANTS.NOTIFY THE OWNER IMMEDIATELY IF ANY ASBESTOS CONTAINING MATERIAL IS IDENTIFIED, OR IF ANY HAZARDOUSMATERIAL IS SUSPECTED.01 35 16 - ALTERATION PROJECT PROCEDURES1THE WORK OF THIS PROJECT INCLUDES ALTERATIONS OF THE EXISTING BUILDING TO ACHIEVE THE ARRANGEMENTINDICATED ON THE DRAWINGS. THE CONTRACTOR SHALL VISIT THE JOB SITE TO DETERMINE THE EXTENT OFDEMOLITION WORK REQUIRED BY THE CONSTRUCTION ACTIVITIES. THE ARCHITECTURAL DRAWINGS FOR THESE AREASSHOW THE CHANGES TO BE MADE. THE CONTRACTOR SHALL REVISE, REARRANGE, REROUTE OR REMOVE EXISTINGWIRING AND HVAC DISTRIBUTION AS NECESSARY TO ACCOMMODATE THE CHANGES AND ADDITIONS SHOWN AND TOPROVIDE CONTINUING ELECTRICAL AND HVAC SERVICES FOR THOSE EXISTING PORTIONS OF THE PROJECT WHICH ARETO REMAIN IN OPERATION.2THE GENERAL CONTRACTOR SHALL PROPERLY PROTECT THE BUILDING AND ANY ADJOINING PROPERTY OR WORK ANDANY DAMAGE TO SAME, CAUSED BY HIS WORK OR WORKMEN MUST BE MADE GOOD WITHOUT DELAY. ANY COSTS FORPATCHING AND REPLACING OF DAMAGED WORK SHALL BE BORNE BY THE GENERAL CONTRACTOR.3IN AREAS WHERE THERE ARE NO ALTERATIONS INDICATED THE EXISTING FACILITIES SHALL BE RETAINED IN SERVICE. INCASE OF DOUBT ASSUME THAT THE EXISTING ELECTRICAL WIRING IS TO REMAIN IN OPERATION THROUGHOUT THECONSTRUCTION PERIOD AND THEREAFTER.4THE ALTERATION OF THE EXISTING BUILDING IS WORK OF A COMPLEX NATURE WHICH WILL REQUIRE ACCURATEPLANNING, CAREFUL PREPARATION AND EXECUTION, ATTENTION TO DETAIL AND CLOSE SUPERVISION BY THECONTRACTOR. THE CONTRACTOR WILL BE REQUIRED TO PERFORM THIS WORK IN FULL COOPERATION WITH THEOTHER CONSTRUCTION TRADES AND SUBJECT TO AN ACCEPTABLE SCHEDULE.5ALL WOODWORK, BLOCKING, GROUNDS, ETC. TO BE FIRE RETARDANT TREATED.6THE GENERAL CONTRACTOR SHALL PROVIDE ALL NECESSARY PROTECTION FOR HIS WORK UNTIL TURNED OVER TO THECLIENT.7THE GENERAL CONTRACTOR SHALL INCLUDE IN HIS ESTIMATE ALL COSTS, (INCLUDING OVERTIME WORK) FORREMOVAL, NEW INSTALLATION AND REINSTALLATION WORK FOR ANY PLUMBING, CEILING (TAKE-DOWN ANDREINSTALLATION), ELECTRICAL, TELEPHONE COMMUNICATIONS EQUIPMENT OR HVAC WORK WITHIN CEILINGPLENUM.8ALL EXISTING APPURTENANCES NOT BEING REMOVED SHALL BE REFURBISHED WHERE REQUIRED. ANY LOOSE ITEMSTIGHTENED (CEILING EXIT SIGNS, ETC.) AND ANY MISSING PARTS REPLACED BY THE GENERAL CONTRACTOR TO ACHIEVEA FINISHED FIRST CLASS INSTALLATION AND APPEARANCE.9ALL REQUIRED EXITS, WAYS OF APPROACH THERETO, AND WAYS OF TRAVEL FROM THE EXIT INTO THE STREET SHALLCONTINUOUSLY BE MAINTAINED FREE FROM ALL OBSTRUCTIONS AND IMPEDIMENTS FOR UNOBSTRUCTED EGRESS INTHE CASE OF FIRE OR OTHER EMERGENCY.10THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL FIRE EXTINGUISHERS AS REQUIRED BY FEDERALOCCUPATIONAL SAFETY AND HEALTH ACT (OSHA), BY FIRE DEPARTMENT REGULATIONS, AND AS SHOWN ON SAADRAWINGS.11THE GENERAL CONTRACTOR SHALL REPLACE ALL BROKEN OR CRACKED WINDOW GLAZING. ALL WINDOW SASHESSHALL BE INSPECTED BY THE CONTRACTOR AND ALL INOPERABLE CONDITIONS SHALL BE REPAIRED.12EACH TRADE SHALL BE RESPNSIBLE FOR PROVIDING AND INSTALLING SEALANTS WHERE SHOWN ON DRAWINGS ORWHERE REQUIRED.13PROVIDE STRUCTURAL SUPPORTS AT ALL WALL MOUNTED EQUIPMENT, CABINETS, PLUMBING AND LIGHT FIXTURES.14WHERE OPENINGS OCCUR IN EXISTING FIRE RATED AREAS OR PARTITIONS DUE TO EXISTING OR NEW CONDUIT RUNS,DUCTWORK, CABLES, PIPING, ETC., AND/OR WHERE EXISTING FIREPROOFING HAS BEEN REMOVED AS A RESULT OFEXISTING OR NEW CONSTRUCTION WORK, THE GENERAL CONTRACTOR SHALL CLOSE AND/OR PATCH AS REQUIRED ALLOPENINGS TO MATCH IMMEDIATE ADJACENT AREA IN MATERIAL, FINISH AND FIRE RATING.15WHERE CONSTRUCTION TO BE REMOVED INTERSECTS CONSTRUCTION TO REMAIN, WORK SHALL INCLUDE ALLATTACHMENT DEVICES (SHOT PINS, ANCHORS, LAG BOLTS, NAILS, NAILERS, SHIMS, ETC.) REQURIED FOR A SMOOTHAND EVEN TRANSITION.16THE GENERAL CONTRACTOR SHALL SURVEY ALL EXISTING FINISHED SURFACES TO INCLUDE CORNER BEADS, STOPS, ETC.FOR CHIPS, CRACKS, HOLES, DAMAGED SURFACES, MARBLE WAINSCOT AND PLASTER CEILING WHENEVER DOORFRAMES HAVE BEEN REMOVED, AND ANY OTHER DEFECTS CAUSING AN APPEARANCE DIFFERENT FROM A NEW FIRSTCLASS FINISHED REPAIRING. GENERAL CONTRACTOR SHALL REMOVE ALL EXISTING DAMAGED FINISHES AND INSTALLNEW SURFACES TO THE SATISFACTION OF SAA. ALL OTHER DAMAGED SURFACES (FINISHED FLOOR SLAB, CONVECTORENCLOSURES, ETC.) SHALL BE REPAIRED TO THE SATISFACTION OF SAA.17THE GENERAL CONTRACTOR SHALL INSPECT ALL EXISTING PLASTER SURFACES. WHERE, AS A RESULT OF DEMOLITION,EXISTING PLASTER HAS BEEN REMOVED AND NEW FINISHED SURFACES WILL NOT ALIGN WITH EXISTING, CONTRACTORSHALL INSTALL NEW CORNER BEADS AND STOPS AND ENTIRE SURFACE SHALL BE RE-PLASTERED TO A SMOOTH, FLUSH,ALIGNED SURFACE.01 40 00 - QUALITY REQUIREMENTS1THE CONSTRUCTION NOTES AND/OR DRAWINGS ARE SUPPLIED TO ILLUSTRATE THE DESIGN AND THE GENERAL TYPE OFCONSTRUCTION QUALITY DESIRED. THEY ARE INTENDED TO APPLY TO THE FINEST QUALITY OF CONSTRUCTION,MATERIAL AND WORKMANSHIP THROUGHOUT.2THE GENERAL CONTRACTOR SHALL MAINTAIN A CURRENT AND COMPLETE SET OF CONSTRUCTION DRAWINGS ON SITEDURING ALL PHASES OF CONSTRUCTION FOR USE BY ALL TRADES.3THE GENERAL CONTRACTOR UPON ACCEPTANCE AND AWARD OF THE CONTRACT ASSUMES FULL RESPONSIBILITY FORTHE CONSTRUCTION, MATERIALS, AND WORKMANSHIP OF THE WORK DESCRIBED IN THESE NOTES AND DRAWINGS,AND WILL BE EXPECTED TO COMPLY WITH THE DESIGN INTENT AS WELL AS ALL OF THE PRINTED AND WRITTENCONSTRUCTION DOCUMENTS.01 41 00 - REGULATORY REQUIREMENTS1THE GENERAL CONTRACTOR, SUBCONTRACTOR AND ANY TENANTS' CONTRACTORS SHALL SUBMIT CERTIFICATES TOTHE BUILDING MANAGER AND OWNER UPON COMPLETION OF WORK, INCLUDING BUT NOT LIMITED TO THEFOLLOWING:A)FIREPROOF WOOD TEST REPORT (IF REQUIRED)B)ELECTRICAL, PLUMBING AND AIR CONDITIONING CERTIFICATES ISSUED BY:1)DEPARTMENT OF WATER SUPPLY, GAS AND ELECTRICITY2)BOARD OF FIRE UNDERWRITERS2PROVIDE CERTIFICATION OF THAT ALL ELECTRICAL, MECHANICAL, AND PLUMBING FIXTURES MEET THE REQUIREMENTSOF TITLE 24 AND CALGREEN.3ALL WORK PERFORMED BY THE CONTRACTOR SHALL CONFORM TO THE REQUIREMENTS OF MUNICIPAL, LOCAL ORFEDERAL AND STATE LAWS, AS WELL AS ANY OTHER GOVERNING REQUIREMENTS, WHETHER OR NOT SPECIFIED ONTHE DRAWINGS.4WHERE THE CONTRACT NOTES OR DRAWINGS CALL FOR ANY WORK OF A MORE STRINGENT NATURE THAN THATREQUIRED BY THE BUILDING CODE OR ANY OTHER DEPARTMENT HAVING JURISDICTION OVER THE WORK, THE WORKOF THE MORE STRINGENT NATURE CALLED FOR BY THE CONTRACT, CONSTRUCTION NOTES OR DRAWINGS SHALL BEFURNISHED AND PROVIDED IN ALL CASES.5THE CONTRACTOR SHALL OBTAIN AND PAY FOR ALL LEGALLY REQUIRED APPROVALS AND PERMITS NECESSARY FOR THEEXECUTION AND COMPLETION OF HIS WORK. FORWARD COPIES TO OWNER AND SAA.01 51 00 - TEMPORARY UTILITIES1THE GENERAL CONTRACTOR SHALL FURNISH A SYSTEM OF TEMPORARY POWER, LIGHTS, WATER, HEAT, AND ANYOTHER TEMPORARY UTILITIES REQUIRED THROUGHOUT THE SPACE UNDER CONSTRUCTION AS REQUIRED TOCOMPLETE THE WORK.01 56 00 - TEMPORARY ENCLOSURES1THE GENERAL CONTRACTOR SHALL EXERCISE STRICT DUST CONTAINMENT CONTROL OVER THE JOB TO PREVENT DIRTOR DUST FROM LEAVING THE JOB SITE.01 57 00 - TEMPORARY CONTROLS1"CONSTRUCTION DUST CONTROL": DURING CONSTRUCTION, DUST CONTROL MEASURES SHALL BE REQUIRED.GRADING WILL BE DISCONTINUED DURING FIRST-STAGE SMOG ALERTS AND SUSPENDED DURING PERIODS OF HIGHWINDS (I.E.: OVER 15 MPH). ALL HAULING TRUCKS SHALL HAVE LOADS COVERED OR WETTED AND LOADED BELOW THESIDEBOARDS TO MINIMIZE DUST. EXERCISE MEASURES TO REMOVE DIRT FROM WHEELED VEHICLES BEFORE ENTERINGTHE PUBLIC WAY. 01 70 00 - EXECUTION AND CLOSEOUT REQUIREMENTS1THE CONTRACTOR SHALL BE FULLY AND SOLELY RESPONSIBLE FOR THE REMOVAL, REPLACEMENT AND RECTIFICATIONOF ALL DAMAGED AND DEFECTIVE MATERIAL AND WORKMANSHIP IN CONNECTION WITH THE CONTRACT WORK. HESHALL REPLACE OR REPAIR AS DIRECTED ALL SUCH DAMAGED OR DEFECTIVE MATERIALS WHICH SHALL APPEAR WITHINA PERIOD OF ONE YEAR FROM THE DATE OF SUBSTANTIAL COMPLETION.2CONTRACT CLOSE-OUT SHALL OCCUR ONLY AFTER THE ARCHITECT HAS PREPARED A PUNCHLIST AND THE PUNCHLISTITEMS HAVE BEEN CORRECTED. THE GENERAL CONTRACTOR SHALL SUBMIT TO THE OWNER MAINTENANCE ANDWARRANTY MANUALS, RELEASE OF LIENS AND RECORD DRAWINGS WITH HIS FINAL APPLICATION FOR PAYMENT.01 71 33 - PROTECTION OF ADJACENT CONSTRUCTION1THE GENERAL CONTRACTOR SHALL PROVIDE A VISQUEEN SEAL FROM FLOOR TO CEILING AT ALL INTERFACES TOPROTECT ADJACENT BUILDING PROPERTY WHILE DEMOLITION AND CONSTRUCTION ARE IN PROGRESS. THIS SEAL IS TOBE KEPT CLOSED AT ALL TIMES.2THE GENERAL CONTRACTOR SHALL AT ALL TIMES PROTECT THE PROPERTY OF THE BUILDING OWNER INCLUDING BUTNOT LIMITED TO, WINDOWS, FLOOR AND CEILING TILE, PUBLIC TOILETS, ELEVATORS, DOORS, FRAMES, ELECTRICALAND AIR CONDITIONING EQUIPMENT, CONVECTOR ENCLOSURES, ETC.3THE CONTRACTOR SHALL AT NO TIME DO ANY WORK OR PLACE ANY CONSTRUCTION THAT MAY AFFECT THEOPERATIONS OF OTHER TENANTS, INCLUDING ANY INTERRUPTIONS IN THE SUPPLY OF POWER OR OTHER UTILITIES,WITHOUT FIRST NOTIFYING THE BUILDING OWNER AND OBTAINING PERMISSION FROM THEM TO PROCEED.01 73 29 - CUTTING AND PATCHING1THE GENERAL CONTRACTOR SHALL DO ALL CUTTING, FITTING, AND PATCHING WORK THAT MAY BE REQUIRED TOMAKE ALL PARTS COME TOGETHER PROPERLY AND FIT TO RECEIVE OR BE RECEIVED BY WORK OF OTHER TRADESSHOWN UPON OR REASONABLY IMPLIED BY THE DRAWINGS AND NOTES.2THE GENERAL CONTRACTOR SHALL PROVIDE ALL FLOOR CUTOUTS AND PATCHING REQUIRED FOR THE INSTALLATIONOF ALL WORK.3THE GENERAL CONTRACTOR SHALL METAL LATH OVER ALL NEW CONDUIT CHASES IN MASONRY PARTITIONS.4ALL DAMAGED EXISTING AREAS TO REMAIN AND EXISTING AREAS AFFECTED BY DEMOLITION OR NEW CONSTRUCTIONWORK SHOWN ON DRAWINGS SHALL BE PATCHED TO MATCH IMMEDIATE EXISTING ADJACENT AREAS IN MATERIALS,FIRE RATING, FINISH AND COLOR UNLESS OTHERWISE NOTED.5ALL FIRE PROOFING REMOVED FROM COLUMNS AND BEAMS DURING THE COURSE OF CONSTRUCTION SHALL BEREPLACED WITH THE SAME MATERIAL AND RATING AS THAT WHICH WAS REMOVED.6CONTRACTOR TO VERIFY WITH OWNER IF X-RAY IS REQUIRED PRIOR TO CORE DRILLING.X-RAY FLOOR PRIOR TO THE COMMENCEMENT OF ANY FLOOR CORING. AVOID CORING THROUGH ANY EXISTING STEELREINFORCEMENT.01 74 00 - CLEANING AND WASTE MANAGEMENT1THE GENERAL CONTRACTOR SHALL REMOVE ALL RUBBISH AND WASTE MATERIALS, BOTH FROM HIS OWN FORCES ANDOTHER SUBCONTRACTORS, INCLUDING RUBBISH WHICH IS A BY-PRODUCT OF CARPET AND CABINET INSTALLATION,TELEPHONE COMPANY INSTALLATION, ETC. AND PROVIDE FOR ITS REMOVAL FROM THE SITE.2AT THE END OF EACH DAY OF CONSTRUCTION OR FINISH WORK, THE CONSTRACTOR AND EACH TRADE SHALL BERESPONSIBLE FOR REMOVING ANY DEBRIS FROM THE SITE. THE JOB SITE SHALL BE CLEANED TO THE SATISFACTION OFTHE OWNER, AND SAA UPON COMPLETION OF THE PROJECT BY THE CONTRACTOR.3 THE EXISTING TO REMAIN, EXISTING RELOCATED OR NEW ITEMS INSTALLED BY THE GENERAL CONTRACTOR INADDITION TO BEING AMPLY PROTECTED THROUGHOUT THE PERIOD OF CONSTRUCTION SHALL BE THOROUGHLYCLEANED TO THE SATISFACTION OF SHLEMMER+ALGAZE+ASSOCIATES PRIOR TO BEING TURNED OVER TO THE OWNER.4 THE EXISTING BUILDING TOILET FACILITIES, IF UTILIZED DURING CONSTRUCTION BY CONTRACTOR PERSONNEL, SHALLBE AMPLY PROTECTED THROUGHOUT THE PERIOD OF CONSTRUCTION AND ALL DAMAGED OR MALFUNCTIONINGITEMS SHALL BE REPAIRED, REPLACED AND THOROUGHLY CLEANED TO THE SATISFACTION OFSHLEMMER+ALGAZE+ASSOCIATES PRIOR TO BEING TURNED OVER TO THE OWNER.5ITEMS THAT ARE TO BE REMOVED AND LATER REINCORPORATED INTO THE PROJECT ARE TO BE CLEANED, STORED,AND REPAIRED IF NECESSARY. SEE SHEETS A1.0 AND A2.0 FOR REUSE OF EXISTING MATERIALS. 01 00 00 GENERAL REQUIREMENTS CONTINUED01 00 00 GENERAL REQUIREMENTS CONTINUED 02 41 00 DEMOLITION02 41 19.16 - SELECTIVE INTERIOR DEMOLITION1THE GENERAL CONTRACTOR SHALL FURNISH ALL LABOR AND MATERIAL REQUIRED TO COMPLETE DEMOLITION ANDREMOVAL OF ALL ITEMS AS INDICATED IN SAA DRAWINGS OR AS OTHERWISE DIRECTED BY SAA.2THE GENERAL CONTRACTOR SHALL FURNISH BUILDING MANAGEMENT AND SAA WITH A COMPLETE INVENTORY LISTOF ALL ITEMS THAT CAN BE REUSED AND/OR STORED IN BUILDING STOCK.3THE GENERAL CONTRACTOR SHALL EXECUTE ALL WORK IN COMPLIANCE WITH THE REGULATIONS OF THE AUTHORITYHAVING JURISDICTION OVER THE BUILDING FOR DEMOLITION AND REMOVAL OF DEBRIS, NOISE ORDINANCE,INCLUDING ACCEPTABLE HOURS FOR OVERTIME WORK REQUIRED.4ALL WORK DEMOLISHED SHALL BE REMOVED FROM THE PREMISES EXCEPT ITEMS TO BE REUSED OR RETURNED TOOWNER OR AS OTHERWISE NOTED.5THE GENERAL CONTRACTOR SHALL REMOVE FROM PREMISES CONDUITS LEFT AFTER WALL DEMOLITION, INCLUDINGSWITCH BOXES, PLATES, BRIDGES OR ANY OTHER TELEPHONE OR ELECTRICAL, INCLUDING WIRING AND EQUIPMENT.6IN ALL AREAS WHERE DEMOLITION (REMOVAL OF TILE, CARPETING, PARTITIONS, ETC.) CAUSES ANY UNEVENNESS INCONCRETE SLAB, THE CONTRACTOR SHALL PATCH TO LEVEL THE SLAB TO RECEIVE NEW FINISHED FLOORING.7DURING THE ENTIRE PERIOD OF DEMOLITION AND CONSTRUCTION, ALL EXISTING EXITS, EXIT LIGHTING, FIREPROTECTIVE DEVICES AND ALARMS SHALL BE CONTINUOUSLY MAINTAINED.8THE GENERAL CONTRACTOR SHALL CUT AND CAP OFF BEHIND FINISH SURFACES ALL PROJECTING PLUMBING, FLOORELECTRICAL/TELEPHONE OUTLETS, AND ALL OTHER PROJECTING ITEMS WHICH ARE BEING ABANDONED.9UPON COMPLETION OF THE DEMOLITION WORK, THE GENERAL CONTRACTOR SHALL LEAVE ALL AREAS IN A BROOMCLEAN CONDITION.10DEMOLITION NOT DESCRIBED HERE BUT NECESSARY FOR THE COMPLETION OF THE WORK SHALL BE THERESPONSIBILITY OF THE CONTRACTOR. THE DEMOLITION DRAWINGS ARE ISSUED FOR INFORMATION ONLY AND SHOWTHE GENERAL EXTENT OF THE DEMOLITION REQUIRED. THESE DRAWINGS DO NOT NECESSARILY SHOW EVERYTHINGTO BE REMOVED IN ORDER TO PREPARE THE EXISTING BUILDING ELEMENTS FOR REMODELING OR NEWCONSTRUCTION. THE ARCHITECTURAL DRAWINGS SHOW THE EXISTING PARTITIONS WITH DOORS AND OTHER ITEMSTO REMAIN.11ALL REMOVED MATERIAL OTHER THAN ITEMS TO BE SALVAGED OR REUSED SHALL BECOME CONTRACTORS PROPERTYU.O.N., AND SHALL BE REMOVED FROM OWNER'S PROPERTY. CLEAN UP AND DISPOSE OF DEBRIS PROMPTLY ANDCONTINUOUSLY AS THE WORK PROGRESSES. SECURE AND PAY FOR REQUIRED HAULING PERMITS, DUMPING FEES ANDCHARGES.12ELECTRICAL, MECHANICAL AND PLUMBING ITEMS SHALL BE REMOVED TO THE FURTHEST TERMINATION POINT ON THEFLOOR. REMOVE ALL UNUSED AND DISCONNECTED HVAC, ELECTRICAL, PLUMBING AND PHONE/DATA CABLING ABOVECEILING AND REMOVE TO THE FURTHEST TERMINATION POINT ON THE FLOOR. COORDINATE EXTENT OF REMOVALWITH MECHANICAL/ELECTRICAL/PLUMBING DRAWINGS.13EXISTING LIGHT FIXTURES, ELECTRICAL OUTLETS, RACEWAY AND WIRING ETC. WILL BE REMOVED AS NOTED PERARCHITECTURAL AND ELECTRICAL DEMOLITION DRAWINGS.14REMOVE ALL FIRE DAMPERS IN EXISTING DUCTWORK WHERE FIRE RATED WALLS ARE DEMOLISHED. REMOVE ALL FIREDAMPERS THAT ARE NOT CODE COMPLIANT.REPLACE ANY FIRE DAMPERS WHERE DAMPERS WILL NEED TO BEUPGRADED TO MEET CURRENT CODE REQUIREMENTS AND RATED WALL IS SCHEDULED TO REMAIN.15THERMOSTATS AND PNEUMATIC LINES SHALL BE REMOVED GENTLY AND COILED BACK TO THE DEVICE THEY CONTROLAND LEFT IN PLACE. ALL OTHER THERMOSTATS SHALL BE REMOVED AND RETURNED TO BUILDING OWNER.16UPON REMOVAL OF THE EXISTING CEILING, THAT PORTION OF THE EXISTING MECHANICAL SYSTEM DESIGNATED TO BERE-USED WILL BE EVALUATED BY THE ENGINEER. IF THE EXISTING MECHANICAL SYSTEMS ARE FOUND TO BEACCEPTABLE FOR RE-USE, THEN THE EXISTING MAIN DUCT, VAV BOXES, PNEUMATIC CONTROL TUBING ETC. SHALLREMAIN AND SHALL BE PROTECTED TO AVOID DAMAGE TO EXISTING HVAC EQUIPMENT DURING DEMOLITION.17CONTRACTOR TO VERIFY THAT ALL EXISTING LIGHT FIXTURES NOT BEING REUSED SHALL BE RETURNED TO BUILDINGOWNER.18THE EXISTING FIRE SPRINKLER SYSTEM SHALL REMAIN IN PLACE (ONLY DURING DEMOLITION). ALL OTHER FIRE/LIFESAFETY EQUIPMENT SHALL BE LEFT IN PLACE. IF A STRUCTURE HOLDING A DEVICE IS REMOVED, THE CONTRACTORSHALL SUPPORT THE FIRE/LIFE SAFETY DEVICE IN A MANNER THAT DOES NOT IMPAIR ITS FUNCTION IN ANYWAY.19REMOVE ALL DATA/TELE CABLING IN CEILING BACK TO POINT OF ORIGINATION. (UNLESS OTHERWISE INSTRUCTED)CONTRACTOR TO VERIFY WITH OWNER'S CABLING VENDOR.20ABANDONED PLUMBING LINES AND DRAINS TO BE REMOVED BACK TO POINT OF ORIGINATION AS REQUIRED FOR NEWWORK.21MAINTAIN FULLY CHARGED FIRE EXTINGUISHERS READILY AVAILABLE DURING ALL DEMOLITION OPERATIONS06 00 00 WOOD, PLASTICS AND COMPOSITES06 41 00 - ARCHITECTURAL WOOD CASEWORK1REFER TO THE “GENERAL NOTES AND INFORMATION SHEETS” FOR ADDITIONAL NOTES.2CONTRACTOR TO SUBMIT COMPLETE SHOP DRAWINGS FOR APPROVAL AND VERIFY ALL DIMENSIONS IN THE FIELDBEFORE FABRICATION. CONFIRM ALL MATERIALS AND FINISHES ON SHOP DRAWINGS. SUBMIT (4) 9”X9” SAMPLES OFEACH FINISH FOR APPROVAL. CONTRACTOR SHALL SUBMIT MSDS SHEETS, SIGNED ATTESTATIONS OR OTHER OFFICIALLITERATURE FROM MANUFACTURER FOR ALL ADHESIVES AND SEALANTS USED ON THE PROJECT.ALL JOINTS, CORNERS AND EDGES ARE TO BE DETAILED IN INDIVIDUAL DETAILS. ALL DIMENSIONS, CRITICAL OROTHERWISE, ARE TO BE CALLED OUT ON THE SHOP DRAWINGS. SHLEMMER+ALGAZE+ASSOCIATES WILL NOT REVIEWDRAWINGS WHICH ARE INCOMPLETE AND SHOW MINIMAL DETAILING. ALL CASEWORK, SPECIAL PRODUCTS, ANDSPECIAL ASSEMBLIES ARE SUBJECT TO SUBMITTAL AND SHOP DRAWING REVIEW. SHOP DRAWINGS AND SUBMITTAL'SSHALL NOT BE WAIVED UNLESS WRITTEN PERMISSION TO DO SO IS GIVEN BY SHLEMMER+ALGAZE+ASSOCIATES.3ALL WOOD VENEERED OR CONVERSION VARNISH FINISHED CASEWORK SHALL BE FABRICATED TO WI PREMIUM GRADESTANDARDS. ALL EXPOSED SURFACES INCLUDING DOORS, TOPS AND BASE SHALL BE VENEERED. CASEWORK SHALL BEBIRCH PLYWOOD STAINED TO MATCH FINISH VENEER. 06 00 00 WOOD, PLASTICS AND COMPOSITES CONT.4ALL PLASTIC LAMINATE MILLWORK TO BE FABRICATED TO WI CUSTOM GRADE STANDARDS. ALL EXPOSED SURFACES TOBE LAMINATE. CASEWORK AT WHITE LAMINATE TO BE 5/8” WHITE KORTRON. CASEWORK AT COLORED LAMINATESHALL BE 5/8” BLACK KORTRON.5COORDINATE LOCATIONS AND PROVIDE METAL BACKING AT WALL FRAMING FOR ALL WALL-MOUNTED CASEWORK.ALL "INSTALLED" CABINETS SHALL BE SCRIBED TO WALL OR CEILING. CABINET CONTRACTOR TO CHECK JOB PROGRESSAND COORDINATE WITH OTHER TRADES INVOLVED. REFER TO DRAWING DETAILS FOR BACKING SUPPORT OF WALLHANGING ITEMS.6CONTRACTOR SHALL SUPPLY AND INSTALL ALL NECESSARY HARDWARE REQUIRED BY THE SPECIFICATIONS OR INTENTOF THE DESIGN. SUBMIT TO SAA FOR APPROVAL CUT SHEETS OF ALL CABINET HARDWARE AND SAMPLES OF ALL PULLSAND KNOBS PRIOR TO FABRICATION.7CONTRACTOR TO PROTECT CASEWORK DURING DELIVERY AND TAKE NECESSARY PRECAUTIONS TO ENSURE THATINSTALLATION OF CASEWORK AND FINISH CARPENTRY WILL NOT BE DAMAGED BY OTHER CONSTRUCTION WORK.8COMPOSITE WOOD AND AGRIFIBER PRODUCTS, INCLUDING CORE MATERIALS, SHALL NOT CONTAIN ANYUREAFORMALDEHYDE RESINS.9LAMINATE ADHESIVES USED TO FABRICATE CASEWORK ON-SITE AND SHOP APPLIED ASSEMBLIES CONTAINING THESELAMINATE ADHESIVES SHALL NOT CONTAIN ANY UREAFORMALDEHYDE.10ALL ADHESIVES AND SEALANTS USED FOR MILLWORK, PANELING, OR VENEERING SHALL BE LOW VOC AND MUST NOTEXCEED THE VOC CONTENT LIMITS OF SCAQMD RULE #1168 REQUIREMENTS IN EFFECT ON JANUARY 1, 2011.11AEROSOL ADHESIVES SHALL MEET REQUIREMENTS EQUAL TO GREEN SEAL STANDARD GC-36 IN EFFECT JANUARY 1,2011.12THE GENERAL CONTRACTOR SHALL CLOSELY COORDINATE HIS WORK WITH THAT OF THE CABINET CONTRACTOR.13ALL CABINET FINISHES SHALL BE AS NOTED ON THE DETAILED DRAWINGS.14THE CABINET CONTRACTOR SHALL PROVIDE RUBBER BUMPERS ON ALL WOOD DOORS.15WHERE MEMBERS ARE MITERED OR BUTTED, THEY SHALL BE JOINED AND SECURED IN A MANNER TO INSURE AGAINSTTHE JOINT OPENING.16ALL FINISHED WORK SHALL, AS FAR AS PRACTICAL, BE ASSEMBLED AND FINISHED IN THE SHOP AND DELIVERED TO THEBUILDING READY TO ERECT IN PLACE.17WHERE FILES ARE SHOWN AS BEING SET INTO CABINET WORK, THE CABINET CONTRACTOR SHALL SET AND BOLT ALLFILES TOGETHER.18THE GENERAL CONTRACTOR SHALL COORDINATE HIS WORK WITH THAT OF THE CASEWORK, STONE, OR OTHERSPECIALTIES CONTRACTORS.19ALL CASEWORK SHOWN SHALL HAVE PLASTIC LAMINATE TOPS, UNLESS OTHERWISE NOTED.20SHELVES AND SEMI-EXPOSED SURFACES, INCLUDING DRAWER INTERIORS, SHALL BE FINISHED WITH A MELAMINECABINET LINER OF A UNIFORM COLOR THROUGHOUT.21ADJUSTABLE METAL SHELF STANDARDS SHALL BE DAPPED OR DRILLED INTO THE SIDES OF CABINETS, UNLESSOTHERWISE NOTED.06 20 00 - FINISH CARPENTRY1WOOD BASE SHALL, IN ALL CONDITIONS, BE INSTALLED RECESSED AND MATCH THE COLOR OF THE ADJACENT WALL,U.O.N. GENERAL CONTRACTOR TO CONFIRM WITH ARCHITECT COLOR IF NOT SPECIFIED ON DRAWINGS AND SUBMITSAMPLE OF COLORED BASE FOR SAA APPROVAL PRIOR TO PURCHASE AND INSTALLATION.08 00 00 OPENINGS08 10 00 - DOORS AND FRAMES1THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL REQUIRED FRAMES AND ASSEMBLIES AS SHOWN ONSHLEMMER+ALGAZE+ASSOCIATES DRAWINGS UNLESS OTHERWISE NOTED. COORDINATE OVERALL DOOR FRAMEDEPTHS WITH WALL TYPES. DOOR AND FRAME ASSEMBLY DIMENSIONS SHALL BE FIELD VERIFIED PRIOR TOFABRICATION AND INSTALLATION.2THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL DOORS AS SPECIFIED ON SHLEMMER+ALGAZE+ASSOCIATESDRAWINGS UNLESS OTHERWISE NOTED.3DETAILED DOOR SCHEDULES SHALL BE SUBMITTED TO SHLEMMER+ALGAZE+ASSOCIATES FOR REVIEW, ANDFABRICATION OF DOORS AND FRAMES SHALL NOT BE COMMENCED UNTIL SUCH REVIEW HAS BEEN RETURNED.4THE BOTTOM 10" OF ALL DOORS (EXCEPT SLIDING AND AUTOMATIC) SHALL HAVE A SMOOTH UNINTERRUPTEDSURFACE TO ALLOW THE DOOR TO BE OPENED BY A WHEELCHAIR FOOTREST WITHOUT CREATING A TRAP ORHAZARDOUS CONDITION. WHERE NARROW FRAME DOORS ARE USED, A 10” HIGH SMOOTH PANEL SHALL BEINSTALLED ON THE PUSH SIDE OF THE DOOR, WHICH WILL ALLOW THE DOOR TO BE OPENED BY A WHEELCHAIRFOOTREST WITHOUT CREATING A TRAP OR HAZARDOUS CONDITION.5ALL REQUIRED EXIT DOORWAYS SHALL HAVE A MINIMUM 32" CLEAR OPENING WITH THE DOOR AT 90 DEGREES TO THECLOSED POSITION. DOORWAYS SHALL BE NOT LESS THAN 36" IN WIDTH AND NOT LESS THAN 6'-8" IN HEIGHT. (CBC2022 1010.1.1)6ONE OF A PAIR OF DOORS SHALL MEET THE MINIMUM OPENING WIDTH REQUIREMENTS.7LANDINGS OR FLOOR LEVEL AT DOORS SHALL NOT BE MORE THAN 1/2-INCH BELOW THE THRESHOLD. RAISEDTHRESHOLDS AND FLOOR LEVEL CHANGES GREATER THAN 1/4-INCH AT DOORWAYS SHALL BE BEVELED WITH A SLOPENOT GREATER THAN ONE UNIT VERTICAL IN TWO UNITS HORIZONTAL. (CBC 2022 11B-404.2.5) 8 SEE SHEET A-2.0 FOR REQUIREMENTS OF DOORS, WINDOWS, AND HARDWARE, I.E. DOOR SCHEDULE, HARDWARESCHEDULE AND DOOR AND WINDOW DETAILS.9 TYPICAL DOOR/FRAME CONVENTIONS ARE AS FOLLOWS:a)DIMENSIONS TO EDGE OF DOOR LOCATING DOOR OPENINGS ARE TO INSIDE FACE OF JAMB, UNLESS OTHERWISENOTED. b)DOOR OPENINGS ARE TO BE LOCATED SO THAT INSIDE FACE OF BUTT SIDE JAMB IS 4" FROM FACE OF PERPENDICULAR WALL AT CORNER, ALLOWING FOR A 90 DEGREE SWING TYPICAL, UNLESS OTHERWISE NOTED.c)SEE SHEET A-2.0 FOR SPECIFIC DOOR REQUIREMENTS.10UNDERCUT BUILDING STANDARD INTERIOR DOORS AS REQUIRED TO CLEAR FINISHED FLOOR BY 1/4". ALL RATEDDOORS SHALL BE ORDERED SO AS TO CLEAR THE FINISHED FLOOR BY 1/4", UNLESS OTHERWISE NOTED. THECONTRACTOR SHALL UNDERCUT ALL NEW AND EXISTING DOORS AS REQUIRED TO ACCOMMODATE ALL FLOORCOVERINGS. VERIFY EXACT THICKNESS OF ALL NEW FLOOR COVERING WITH SHLEMMER+ALGAZE+ASSOCIATES PRIORTO UNDERCUTTING OF DOORS.11 ANY GLAZING ON OR WITHIN 24" OF A DOOR SHALL BE TEMPERED.12ALL HOLLOW METAL DOORS SHALL BE PROVIDED WITH STEEL FRAMES.13EXIT DOORS SHALL SWING IN THE DIRECTION OF EXIT TRAVEL WHEN SERVING ANY HAZARDOUS AREA, ELECTRICALROOMS WITH 800A EQUIPMENT, OR WHEN SERVING AN OCCUPANT LOAD OF 50 OR MORE.14EXIT DOORS SHALL BE OPERABLE FROM THE INSIDE WITHOUT THE USE OF A KEY OR ANY SPECIAL KNOWLEDGE OREFFORT. (2022 CBC 1010.2).A.EXCEPTION: THIS REQUIREMENT SHALL NOT APPLY TO EXTERIOR EXIT DOORS IN A GROUP "B" OCCUPANCY IF THEREIS A VISIBLE, DURABLE SIGN ON OR ADJACENT TO THE DOOR STATING "THIS DOOR TO REMAIN UNLOCKED DURINGBUSINESS HOURS". THE LETTERS SHALL BE NOT LESS THAN 1 INCH HIGH ON A CONTRASTING BACKGROUND. THELOCKING DEVICE MUST BE A TYPE THAT WILL BE READILY DISTINGUISHABLE AS LOCKED.08 71 00 - DOOR HARDWARE1DETAILED HARDWARE SCHEDULES SHALL BE SUBMITTED TO SHLEMMER+ALGAZE+ASSOCIATES FOR REVIEW.HARDWARE ORDER SHALL NOT COMMENCE UNTIL SUCH REVIEW HAS BEEN RETURNED AND ACCEPTED OR ACCEPTEDWITH MARKINGS.2ALL LOCK SETS SHALL BE CODED AND/OR KEYED IN ACCORDANCE WITH THE BUILDING STANDARD REQUIREMENTS.CODES AND/OR KEYS ARE TO BE DELIVERED TO OWNER PROPERLY TESTED AND/OR TAGGED. THE NUMBER OF MASTERAND PASS KEYS SHALL BE COORDINATED WITH OWNER. BUILDING MASTER KEYS SHALL BE MARKED “DO NOTDUPLICATE”.3MAXIMUM EFFORT TO OPERATE DOORS SHALL NOT EXCEED 5 POUNDS FOR EXTERIOR DOORS AND 5 POUNDS FORINTERIOR DOORS, SUCH PULL/PUSH EFFORT BEING APPLIED AT RIGHT ANGLES TO HINGED DOORS AND AT THE CENTERPLANE OF THE SLIDING OR FOLDING DOORS. COMPENSATING DEVICES OR AUTOMATIC DOOR OPERATORS MAY BEUTILIZED TO MEET THE ABOVE STANDARD. WHEN FIRE DOORS ARE REQUIRED, THE MAXIMUM EFFORT TO OPERATETHE DOOR MAY BE INCREASED TO THE MINIMUM ALLOWABLE BY THE APPROPRIATE AUTHORITY HAVINGJURISDICTION, BUT IN ALL CASES SHALL NOT EXCEED 15 POUNDS.4LATCHING AND LOCKING DOORS THAT ARE HAND ACTIVATED AND WHICH ARE IN THE PATH OF TRAVEL SHALL BEOPERABLE WITH A SINGLE EFFORT BY LEVER TYPE HARDWARE, PANIC BARS, PUSH-PULL ACTIVATING BARS, OR BARS OROTHER HARDWARE DESIGNED TO PROVIDE PASSAGE WITHOUT REQUIRING THE ABILITY TO GRASP OR PINCH THEOPENING HARDWARE.5ALL MANUALLY OPERATED EDGE OR SURFACE-MOUNTED FLUSH BOLTS ARE PROHIBITED ON EXIT DOORS. WHEN EXITDOORS ARE USED IN PAIRS AND APPROVED AUTOMATIC FLUSH BOLTS ARE USED, THE DOOR LEAF HAVING THEAUTOMATIC FLUSH BOLTS SHALL HAVE NO DOOR KNOB OR SURFACE-MOUNTED HARDWARE. THE UNLATCHING OFANY LEAF SHALL NOT REQUIRE MORE THAN ONE OPERATION.6ALL EXIT DOOR HARDWARE SHALL BE OF AN APPROVED TYPE AND TESTED IN ACCORDANCE WITH PROCEDURESESTABLISHED BY SFM 33.2 AND SFM 33.3 AS SHOWN IN CHAPTER 2-60 OF TITLE 24.7ALL THRESHOLDS SHALL NOT EXCEED 1/2" CHANGE IN ELEVATION WITH A 1:2 BEVEL. (CBC 2022 11B-303.3) 8PANIC HARDWARE, WHEN INSTALLED, SHALL COMPLY WITH ALL APPLICABLE BUILDING CODE REQUIREMENTS. THEACTIVATING MEMBER SHALL BE MOUNTED AT A HEIGHT OF NOT LESS THAN 34 INCHES NOR MORE THAN 44 INCHESABOVE THE FLOOR. THE UNLATCHING FORCE SHALL NOT EXCEED 15 POUNDS WHEN APPLIED IN THE DIRECTION OFEXIT TRAVEL.9ALL RATED CORRIDOR DOORS SHALL HAVE A THRESHOLD WITH A SMOKE AND DRAFT SEAL AT HEAD AND JAMBS. 09 00 00 FINISHES CONTINUED5ALL PARTITIONS SHALL BE SECURELY ANCHORED AS PER MANUFACTURERS SPECIFICATIONS AND AS REQUIRED BY THESTATE AND LOCAL CODES.6THE GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT FRAMING FOR ALL WALL PARTITIONS, AND FOR ALL DUCTWORK, RETURN AIR OPENINGS AND GRILL OPENINGS ABOVE AND BELOW HUNG CEILING. THESE OPENINGS ARE TO BECOORDINATED WITH HVAC ENGINEERING DRAWINGS AND THE MECHANICAL CONTRACTORS SHOP DRAWINGS. ALLOPENINGS SHALL BE PROPERLY SEALED FOR SOUNDPROOFING AND VIBRATION.7THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL ALL ACCESS PANELS AS REQUIRED FOR MECHANICAL,ELECTRICAL AND PLUMBING INSTALLATIONS PER LOCAL BUILDING CODES. LOCATIONS SHALL BE COORDINATED WITHSAA PRIOR TO FINAL INSTALLATION.8THE GENERAL CONTRACTOR WILL NOT BE ENTITLED TO A CHANGE ORDER FOR OPENING ANY PARTITIONS BECAUSE OFTELEPHONE INSTALLATION, SECURITY SYSTEMS OR COMPUTER DATA SYSTEMS.9SAA SHALL HAVE THE RIGHT TO REVIEW AND APPROVE ALL CHALK LINES PRIOR TO INSTALLATION OF WALL TRACK. SAA ISTO BE NOTIFIED OF ANY REQUIRED DEVIATION FROM CONSTRUCTION DIMENSIONS OR CLEARANCES AS DESIGNATED ONPLAN OR ANY APPARENT CONSTRUCTION CONFLICTS.10THE GENERAL CONTRACTOR IS TO VERIFY, PRIOR TO BID, THE RATING OF THE EXISTING PARTITIONS, COLUMNS, ETC. THEGENERAL CONTRACTOR SHALL PROVIDE WALL FURRING AT EXISTING PARTITIONS WITH A RATING OF GREATER THEN 1HOUR WHERE REQUIRED TO ACCOMMODATE ELECTRICAL OR PLUMBING CONDITIONS AS INDICATED ON THE DRAWINGS.11STANDARD DRYWALL STUDS SHALL BE ELECTRO-GALVANIZED STEEL WITH PUNCHED UTILITY OPENINGS AND KNURLEDFLANGE WITH AT LEAST 1-1/4" WIDE FLANGE RETURNS. FURNISH 25 GA. STUDS EXCEPT WHERE 20 GAUGE OR HEAVIER ISSHOWN OR REQUIRED ON THE DRAWINGS.12GAUGE SPECIFIED ABOVE ARE A MINIMUM, WHERE REQUIRED STUD HEIGHT EXCEEDS CODE COMPLIANCE, PROVIDEHEAVIER GAUGE STUDS OR DECREASE STUD SPACING AS NECESSARY TO CONFORM TO CODE.13ALL INTERIOR PARTITIONS HAVE BEEN DESIGNED COMPLIANT TO 2022 CBC 1607.16 AND CAN WITHSTAND AHORIZONTAL LOAD OF 5 LBS. SEE SHEET A-30.0.14ALL FIRE RATED PARTITIONS SHALL MEET CONSTRUCTION REQUIREMENTS PER 2022 CBC TABLE 721.1(2) ITEM #13-1.115ALL PIPE AND CONDUIT PENETRATIONS THROUGH FIRE RATED PARTITIONS SHALL BE FULLY SEALED WITH APPROVED FIRERATED CALUKING MATERIAL, AND ALL DUCTWORK FITTED WITH APPROPRIATELY SIZED FIRE DAMPERS.09 29 00 - GYPSUM BOARD1ALL GYPSUM BOARD CONSTRUCTION IS TO MEET THE GYPSUM ASSOCIATION STANDARDS AS ENFORCED BY THESOUTHERN CALIFORNIA DRYWALL CONTRACTORS ASSOCIATION INC.2THE GENERAL CONTRACTOR SHALL USE CORNER BEADS AT ALL EXPOSED CORNERS AND J-MOULD TRIM AT ALL EXPOSEDENDS IN PLASTER AND DRYWALL PARTITIONS.3ALL DRYWALL SHALL BE INSTALLED WITH VERTICAL JOINTS ONLY. ALL JOINTS SHALL OCCUR AT STUDS ONLY. USEAPPROPRIATE SIZE AND LENGTH FASTENERS TO SUIT APPLICATION.4GYPSUM BOARD FINISH SHALL BE AS REQUIRED BY SAA AND APPROPRIATE TO THE TYPE OF WALL AND LOCATIONSERVED.09 30 00 - TILING1CERAMIC TILE INSTALLATION METHOD - (DRY METHOD). CONTRACTOR TO INSTALL CERAMIC TILE IN ACCORDANCE WITHANSI/TCA A108.5 SPECIFICATIONS. HORIZONTAL MORTAR BED SHALL BE A THIN SET BOND COAT, DRY OR LATEXPORTLAND CEMENT MORTAR MEETING ANSI/TCA F113-89. VERTICAL APPLICATION SHALL MEET ANSI/TCA METHODW242-89, GROUT SHALL BE CEMENTING DRY CURE TYPE WITH LATEX ADDITIVE FOR STRENGTH AND ACID RESISTANCE;COLOR TO BE AS SPECIFIED BY SHLEMMER+ALGAZE+ASSOCIATES. PROVIDE ALL NECESSARY CAPS, STOPS, RETURNS,TRIMMERS AND OTHER SHAPES TO COMPLETE INSTALLATION. PROVIDE COVE TYPE BASE TO MATCH WALL WHERE WALLTILE IS USED, OTHERWISE MATCH COLOR OF FLOOR TILE. PROVIDE THRESHOLD AT WALL OR FRAME OPENINGS TO OTHERBUILDING AREAS NOT RECEIVING CERAMIC TILE FLOOR FINISH.2CERAMIC TILE INSTALLATION METHOD - (WET METHOD). CONTRACTOR IS TO INSTALL CERAMIC TILE IN ACCORDANCEWITH ANSI/TCA A108.5 SPECIFICATIONS. HORIZONTAL MORTAR BED SHALL BE A THIN SET BOND COAT, DRY OR LATEXPORTLAND CEMENT MORTAR MEETING ANSI/TCA F122-89. VERTICAL APPLICATION SHALL MEET ANSI/TCA METHODW223-89. SHOWER STALL SHALL MEET ANSI/TCA B416-89. GROUT SHALL BE CEMENTING DRY CURE TYPE WITH LATEXADDITIVE FOR STRENGTH AND ACID RESISTANCE; COLOR TO BE AS SPECIFIED BY SHLEMMER+ALGAZE+ASSOCIATES.PROVIDE ALL NECESSARY CAPS, STOPS, RETURNS, TRIMMERS AND OTHER SHAPES TO COMPLETE INSTALLATION. PROVIDECOVE TYPE BASE TO MATCH WALL WHERE WALL TILE IS USED, OTHERWISE MATCH COLOR OF FLOOR TILE. PROVIDETHRESHOLD AT WALL OR FRAME OPENINGS TO OTHER BUILDING AREAS NOT RECEIVING CERAMIC TILE FLOOR FINISH.3CONTRACTOR IS TO INSTALL CERAMIC TILE IN ACCORDANCE WITH ANSI/TCA A108.5 INSTALLATION SPECIFICATIONS.MORTAR BED SHALL BE A THIN-SET BOND COAT, DRY CEMENT MORTAR MEETING ANSI/TCA A118.4. GROUT SHALL BECEMENT DRY CURE TYPE, WITH LATEX ADDITIVE FOR STRENGTH AND ACID RESISTANCE, COLOR TO BE SPECIFIED BYDESIGNER. PROVIDE NECESSARY CAPS, STOPS, RETURNS, TRIMMERS AND OTHER SHAPES TO COMPLETE INSTALLATION.PROVIDE COVE TYPE BASE TO MATCH WALL WHERE WALL TILE IS USED, OTHERWISE MATCH COLOR OF FLOOR TILE.PROVIDE THRESHOLD AT WALL OR FRAME OPENINGS TO OTHER BUILDING AREAS NOT RECEIVING CERAMIC TILE FLOORFINISH.4CERAMIC TILE INSTALLATION TO BE IN ACCORDANCE WITH MANUFACTURER'S RECOMMENDED INSTRUCTIONS AND ANSIA108, A118 AND A136.5CERAMIC TILE LAYOUT DIAGRAM TO BE APPROVED BY SHLEMMER ALGAZE ASSOCIATES BEFOREORDERING/INSTALLATION OF TILE.09 33 00 - STONE TILING1STONE TILE INSTALLATION SHALL BE A THIN-SET APPLICATION CONFORMING TO ANSI A108.4 TCNA HANDBOOK ANDSECTION 12 SHEET A0.2, REQUIREMENTS FOR HORIZONTAL AND VERTICAL APPLICATIONS. GROUTED JOINTS SHALL BE1/16” AND CONFORM TO ANSI A108.10 AND TCNA HANDBOOK SPECIFICATIONS. GROUT COLOR TO BE SPECIFIED BYSHLEMMER+ALGAZE+ASSOCIATES. GROUT COLOR AT STONE TILE FLOORING SHALL BE COLORED TO MATCH THEADJACENT FLOORING MATERIAL OR AS SELECTED BY SAA UNLESS OTHERWISE NOTED. WHERE MORE THAN ONE COLOR ISTO BE INSTALLED, GROUT COLOR SHALL BE CONFIRMED WITH SAA BEFORE INSTALLATION. EXPANSION JOINTS SHALLMEET TCNA METHOD EJ171. ALL HORIZONTAL SURFACES SHALL RECEIVE A CLEAR SEALER COAT AS MANUFACTURED BYMIRA-SEAL #511 OR EQUAL, AND SHALL BE APPLIED IN ACCORDANCE WITH MANUFACTURERS RECOMMENDATIONS.2PROVIDE FLUSH STONE THRESHOLD TO MATCH ADJACENT STONE FLOORING AT TRANSITIONS BETWEEN STONE ANDCARPET FLOORING.3STONE TILE LAYOUT DIAGRAM TO BE APPROVED BY SHLEMMER ALGAZE ASSOCIATES BEFORE ORDERING/INSTALLATIONOF TILE.4MARBLE TILE INSTALLATION SHALL BE A THIN-SET APPLICATION CONFORMING TO ANSI A108.4 AND TCNA HANDBOOKAND SECTION 12 SHEET GN-1, REQUIREMENTS FOR HORIZONTAL AND VERTICAL APPLICATIONS. GROUTED JOINTS SHALLBE 1/16" AND CONFORM TO ANSI A108.10 AND TCNA HANDBOOK SPECIFICATIONS. GROUT COLOR IS TO BE SELECTED BYSAA. EXPANSION JOINTS SHALL MEET TCNA METHOD EJ171. ALL HORIZONTAL SURFACES SHALL RECEIVE A CLEAR SEALERCOAT AS MANUFACTURED BY MIRA-SEAL #511 OR EQUAL AND SHALL BE APPLIED IN ACCORDANCE WITHMANUFACTURERS RECOMMENDATIONS.09 50 00 - CEILINGS1CONTRACTOR SHALL REFER TO ALL PERTINENT SECTIONS OF THE GENERAL NOTES, SPECIFICATIONS, AND SCHEDULE OFFINISHES FOR COMPLETE AND PROPER INSTALLATION OF WORK.2GENERAL CONTRACTOR SHALL ENSURE CLEARANCE HEIGHT FOR LIGHT FIXTURES, DUCTS, FIRE SPRINKLERS, ETC. SHOULDANY OBSTRUCTIONS OCCUR THAT PREVENT INSTALLATION OF ANY REQUIRED COMPONENT, NOTIFY SAA PRIOR TOINSTALLATION OF GRID. INSTALLATION WITHOUT APPROVAL SHALL BE REMOVED REINSTALLED PER DIRECTION OF SAAAT GENERAL CONTRACTORS SOLE EXPENSE.3FIRE/LIFE SAFETY FIXTURES SHOWN ON PLAN ARE SUGGESTED LOCATIONS ONLY. CONTRACTOR TO PREPARE ANDCOORDINATE DESIGN/BUILD DRAWINGS SHOWING APPROPRIATE LOCATION OF STROBES AND EXIT SIGNS. SUBMITCOORDINATED SHOP DRAWINGS TO SAA FOR REVIEW AND TO LOCAL FIRE DEPARTMENT FOR PERMIT PRIOR TO THECOMMENCEMENT OF ANY INSTALLATION.4BOTH NEW AND EXISTING SPRINKLER HEADS FOR THE AREA OF WORK SHALL BE LOCATED PER SPRINKLER CONTRACTORDESIGN/BUILD DRAWINGS. ONCE SUBMITTED TO AND REVIEWED BY SAA, DRAWINGS SHALL THEN BE SUBMITTED TOLOCAL FIRE DEPARTMENT FOR APPROVAL.5ALL FIXTURES, DEVICES, AND SPRINKLER HEADS ARE TO BE LOCATED AT THE CENTER OF CEILING TILE UNLESS NOTEDOTHERWISE, PROVIDE PROPOSED LOCATIONS IN DRYWALL CEILING TO SAA FOR APPROVAL.6REFER TO DRAWING DETAILS FOR TYPICAL SUSPENDED CEILING GRID SUPPORT.7ALL LAY IN PANELS SHALL BE SECURED TO THE SUSPENSION SYSTEM WITH TWO HOLD-DOWN CLIPS MINIMUM FOR EACHTILE WITHIN A 4-FOOT RADIUS OF THE EXIT LIGHTS AND EXIT SIGNS.8CEILING GRID SHALL BE INSTALLED WITHIN A LEVEL HORIZONTAL TOLERANCE OF 1/8" PER 12'-0". SUPPORT AND BRACEAS INDICATED ON REFLECTED CEILING PLAN DETAILS.9PROVIDE ACCESS PANELS WHERE REQUIRED WHEN CEILING SYSTEM IS SUSPENDED GYP. BOARD. (EXACT LOCATION OFACCESS PANELS TO BE APPROVED BY OWNER/ ARCHITECT). ALL ACCESS PANELS IN GYPSUM BOARD CEILING TO BE GFRGACCESS PANELS SIZED AS REQUIRED. "MOONLIGHT MOLDS" OR APPROVED EQUAL. PROVIDE BOTH 24" X 24" & 18" X 18"SIZED OPENING ACCESS PANELS. CONFIRM SIZE AND LOCATION WITH SAA. ACCESS PANELS SHALL BE PROVIDED FORELECTRICAL, PLUMBING AND AIR CONDITIONING CONTROLS OR AS REQUIRED BY THE UNIFORM BUILDING CODE,UNIFORM MECHANICAL CODE, NFPA, UPC AND LOCAL CITY CODES. IF LOCATION AND TYPE IS NOT SHOWN ONDRAWINGS, CONFIRM LOCATION AND TYPE WITH SAA PRIOR TO INSTALLATION.10RELOCATE/RAISE EXISTING BACK BOXES, CONDUIT, HVAC EQUIPMENT, DEVICES AND ANY OTHER ITEMS THAT WILL NEEDUPWARD RELOCATION BASED ON NEW ROOM CEILING HEIGHT.11CEILING GRID SYSTEMS WITHIN AREA OF WORK ARE TO BE INSTALLED IN A CONTINUOUS GRID PATTERN SO THAT WHENA PENETRATING PARTITION IS REMOVED, NECESSARY CEILING REPAIRS WILL RESULT IN A CONSISTENT CEILING GRID.12LATERAL BRACING SHALL BE PROVIDED BY WIRES OF MINIMUM 12 GA., SPLAYED IN FOUR DIRECTIONS AND 90 DEGREESAPART. CONNECT TO THE MAIN RUNNER WITHIN 12 INCHES OF THE CROSS RUNNER AND TO THE STRUCTURE ABOVE ORTO PARTITION. ATTACH TO WALLS OR BRACE AT AN ANGLE NOT TO EXCEED 45 DEGREES FROM THE PLANE OF THECEILING. SUPPORT POINTS SHALL BE PLACED 12" O.C. IN EACH DIRECTION WITH THE FIRST POINT WITHIN 4'-0" FROMEACH WALL133403.6 - SUSPENDED CEILING UPGRADE. WHEN AN ADDITION, ALTERATION OR REPAIR IS PERFORMED ON ANOCCUPANCY IN WHICH THERE IS AN EXISTING SUSPENDED CEILING, SUCH SUSPENDED CEILING SHALL BE MODIFIEDTHROUGHOUT TO COMPLY WITH THE PROVISIONS OF ASTM C 635 AND ASTM C 636. (2022 CBC 808.1.1.1). 14AT ALL EXISTING CEILINGS TO REMAIN, THE GENERAL CONTRACTOR SHALL PROVIDE ADDITIONAL AND /OR NEWCOMPRESSION POST AND LATERAL BRACING OF THE CEILING GRID AT ALL AREAS WHICH ARE NOT IN COMPLIANCE WITHCURRENT CODES.15SUSPENSION SYSTEM SHALL BE AS INDICATED IN REFLECTED CEILING PLAN. LIGHT FIXTURES SHALL BE INDEPENDENTLYSUPPORTED AT OPPOSITE CORNERS WITH NO. 12 WIRES.16PROVIDE NEW SUSPENDED CEILING TO CONCEAL PIPING, DUCTS, ETC. IN FINISHED ROOMS. IF EXISTING CONDITIONSREQUIRE DEVIATIONS FROM INDICATED CEILING HEIGHTS DUE TO STRUCTURAL OR MECHANICAL REQUIREMENTS,OBTAIN SAA APPROVAL BEFORE INSTALLING CEILING.17ALL CEILING FINISHES SHALL BE NON-COMBUSTIBLE OR HAVE A FLAME SPREAD INDEX OF 0 TO 25; SMOKE-DEVELOPEDINDEX 0-450. 09 00 00 FINISHES CONTINUED09 60 00 - FLOORING1CONTRACTOR SHALL FURNISH AND INSTALL ALL FLOOR FINISHES AS SPECIFIED ON THE DRAWINGS AND SPECIFICATIONS.2CONTRACTOR TO PREP FLOORS FOR NEW FLOOR COVERING, FLOAT FLOORS TO LEVEL SURFACE AS REQUIRED TO ACCEPTNEW FLOOR FINISH MATERIAL. THE GENERAL CONTRACTOR SHALL PATCH ALL CRACKS, HOLES OR OTHER IMPERFECTIONS(PROJECTIONS SHALL BE REMOVED AND PATCHED TO PROVIDE A CONTINUOUS SMOOTH FLOOR SURFACE). FLOOR LEVELSHALL NOT EXCEED 1/8" IN 10-0" NON-CUMULATIVE.3THE GENERAL CONTRACTOR SHALL NOTIFY SAA AFTER FLOOR PATCHING IS COMPLETE AND RECEIVE THEIR REVIEW ANDACCEPTANCE PRIOR TO INSTALLATION OF FINISHED FLOORING.4 SPACES BEING SURFACED SHALL BE CLOSED TO TRAFFIC AND OTHER WORK DURING THE LAYING OF FLOORING. STONEFLOORS SHALL BE COVERED AFTER INSTALLATION FOR PROTECTION.5UPON COMPLETION, ALL WORK SHALL BE CLEANED BY THE CONTRACTOR REMOVING ALL SPOTS OF ADHESIVE ANDSURFACE STAINS AND ALL SCRAPS, CARTONS AND CONTAINERS SHALL BE REMOVED FROM THE BUILDING.6STONE, WOOD, AND TILE FLOORING CONTRACTORS TO SUBMIT TO SAA ACTUAL DIMENSIONED LAYOUT PLAN FORAPPROVAL PRIOR TO INSTALLATION.7THE GENERAL CONTRACTOR TO COORDINATE ALL FLOORING CONTRACTORS INVOLVED TO ASSURE FLUSH INSTALLATIONOF ALL VARYING FLOOR MATERIALS USED. ALL TRANSITION METHODS TO BE APPROVED BYSHLEMMER+ALGAZE+ASSOCIATES.8CLOSET FLOORS ARE TO HAVE SAME FLOORING AS THE FLOORING IN ADJACENT AREA, UNLESS OTHERWISE NOTED.9ALL FINISHES SHALL HAVE A MAXIMUM FLAME SPREAD OF 200 AND A MAXIMUM SMOKE DENSITY OF 450. (2022 CBC803.1& 803.1.2).10CONTRACTOR TO VERIFY AVAILABILITY OF ALL PRODUCTS SPECIFIED AND NOTIFY ARCHITECT IMMEDIATELY IF THERE AREANY DISCREPANCIES WITH PROJECT COMPLETION DATE. PRODUCTS MAY REQUIRE A TWO TO SIX WEEK LEAD-TIME.NOTIFY ARCHITECT OF ALL LONG LEAD ITEMS.11NO SUBSTITUTIONS OF ANY MATERIAL ALLOWED WITHOUT WRITTEN APPROVAL OF ARCHITECT.12PROVIDE APPROPRIATE SEALER ON STONE FLOORING TO ACHIEVE THE SLIP COEFFICIENT REQUIRED BY CODE. OBTAIN ALLTEST RESULTS AND PROVIDE THE ORIGINAL TEST RESULTS TO THE SAA. APPLY SEALER PER MANUFACTURESINSTRUCTIONS.13THE GENERAL CONTRACTOR SHALL PROVIDE AS PART OF HIS BID, A SEPARATE UNIT COST FOR EACH FLOORING MATERIALSPECIFIED FOR THIS PROJECT. REFER TO SHEET A-5.0 FOR FLOORING MATERIALS SPECIFIED. PROVIDE A SEPARATE COSTFOR THE INSTALLATION OF THE FLOORING MATERIAL. ANY BID THAT DOES NOT PROVIDE A BREAK DOWN WILL BECONSIDERED NON-RESPONSIVE AND NOT ACCEPTED.09 65 00 - RESILIENT FLOORING1THE GENERAL CONTRACTOR, AFTER PROPOERLY CLEANING THE FLOORING MATERIAL, SHALL GIVE RESILIENT TILE FLOORTWO (2) APPLICATIONS OF AN APPROVED NON-SLIP WAX WHICH IS TO BE THOROUGHLY MACHINE BUFFED AND LEFT INCONDITION ENTIRELY SATISFACTORY TO SHLEMMER+ALGAZE+ASSOCIATES.2THE GENERAL CONTRACTOR SHALL PROVIDE AND MAINTAIN ADEQUATE PROTECTION FOR ALL RESILIENT FLOORINGWORK FOR THE DURATION OF THE CONTRACT, AND REMOVE ALL PROTECTION PRIOR TO PUNCH LIST.09 65 13 - RESILIENT BASE AND ACCESSORIES1RUBBER AND/OR VINYL BASE SHALL IN ALL CONDITIONS MATCH THE COLOR OF ADJACENT WALL U.O.N. GENERALCONTRACTOR TO CONFIRM WITH SAA EXACT COLOR IF NOT SPECIFIED ON DRAWINGS AND SUBMIT SAMPLE OF COLOREDBASE TO SAA FOR APPROVAL PRIOR TO PURCHASE AND INSTALLATION.2ALL RESILIENT BASE TO BE AS SPECIFIED ON SHEET A-5.0. ALL MASONRY WALLS AND DRYWALL SHALL HAVE SPECIFIEDSTRAIGHT VINYL BASE IN CARPETED AREAS AND COVE VINYL BASE IN RESILIENT TILE AREAS UNLESS OTHERWISE NOTED.3PROVIDE BLACK RUBBER REDUCER STRIP WHERE CARPET AND VCT TRANSITION OCCURS, UNLESS OTHERWISE NOTED.09 68 00 - CARPETING1ALL ROLL CARPETING SHALL BE INSTALLED DIRECT GLUE, U.O.N.2ALL CARPET SEAMS ARE TO BE SEALED AS PER CARPET MANUFACTURER'S PUBLISHED INSTALLATION INSTRUCTIONS.SEAMING DIAGRAMS TO BE APPROVED BY SHLEMMER+ALGAZE+ASSOCIATES BEFORE ORDERING/INSTALLATION OFCARPETING.3ALL WORKMANSHIP SHALL BE OF THE HIGHEST QUALITY AND WHEN THE WORK IS COMPLETE, IT SHALL BE FREE FROMBUCKLES, BUBBLES, OPEN JOINTS OR OTHER IMPERFECTIONS. SEAMS SHALL BE KEPT IN ACCURATE ALIGNMENT ALONGBOTH COORDINATES. CARPET TILE HAVING CHIPPED OR ROUNDED CORNERS WILL BE REJECTED AND IF LAID, SHALL BEREMOVED AND REPLACED WITH ACCEPTABLE TILE.4CARPET TILE SHALL BE INSTALLED IN A SQUARE PATTERN WITH COURSES PARALLEL TO WALLS, UNLESS OTHERWISEINDICATED ON DRAWINGS. THE ADHESIVE USED FOR CEMENTING TILE SHALL BE APPLIED FAR ENOUGH IN ADVANCE OFTHE SETTING TO PERMIT THE ADHESIVE TO REACH ITS INITIAL SET BUT NOT ITS FINAL SET.5INSTALL CARPET FROM THE SAME DYE LOT.6SUBMIT CARPET FROM ACTUAL CARPET RUNS. APPROVAL IS AT THE DISCRETION OF SAA AND OWNER.7CREATE CARPET TO CARPET OR CARPET TO OTHER FLOORING TRANSITIONS BENEATH THE CENTERLINE OF DOOR IN THECLOSED POSITION.8WHERE FLOOR MOUNTED OUTLETS ARE REQUIRED ON CARPETED AREA, CUT THE CARPET IN AN "X" OVER THE HOLE ANDCARPET UNDER, THIS ALLOWS CARPET PATCHING WHERE OUTLETS ARE LATER CAPPED. DO NOT TRIM THE CARPET.9CARPET CONTRACTOR MUST VERIFY EXISTING FLOOR CONDITIONS PRIOR TO BID AND INSTALLATION.10CARPET MUST MEET OR EXCEED CARPET AND RUG INSTITUTE'S GREEN LABEL PLUS TESTING AND PRODUCTREQUIREMENTS.11CARPET PAD, IF SPECIFIED, MUST MEET OR EXCEED CARPET AND RUG INSTITUTE'S GREEN LABEL TESTING AND PRODUCTREQUIREMENTS.12CARPET ADHESIVES MUST BE LOW VOC AND MUST NOT EXCEED THE VOC CONTENT LIMITS OF SCAQMD RULE #1168REQUIREMENTS IN EFFECT ON JANUARY 1, 2011.13CONTRACTOR SHALL SUBMIT MSDS SHEETS, SIGNED ATTESTATIONS OR OTHER OFFICIAL LITERATURE FROMMANUFACTURER FOR ALL FLOOR FINISH, BASE AND ADHESIVES USED ON THE PROJECT.09 72 00 - WALLCOVERINGS1THE GENERAL CONTRACTOR SHALL INSTALL WALLCOVERINGS IN ACCORDANCE WITH MANUFACTURERS INSTALLATIONSPECIFICATIONS, WHERE DESIGNATED. ALL WALLCOVERINGS SHALL BE SMOOTH, WITH NO WRINKLES, BUBBLES ORLOOSE EDGES, ALL PASTE AND BRUSH MARKS SHALL BE THOROUGHLY REMOVED. WALL COVERING ADJOINING WOOD ORMETAL TRIM SHALL BE CUT STRAIGHT AND SQUARE. ALL WORKMANSHIP WHICH IS NOT JUDGED TO BE FIRST QUALITY BYSHLEMMER+ALGAZE+ASSOCIATES WILL BE REJECTED.2ALL FINISHES SHALL COMPLY TO A MAXIMUM FLAME SPREAD OF 200 AND A MAXIMUM SMOKE DENSITY OF 450. (2022CBC 803.1 & 803.1.2)3ALL DRAPES, HANGING CURTAINS AND OTHER DECORATIVE MATERIALS SHALL BE TREATED AND MAINTAINED IN A FLAMERETARDANT CONDITION.09 90 00 - PAINTING AND COATING1UNLESS OTHERWISE SPECIFIED, ALL AREAS ARE TO BE PAINTED IN ACCORDANCE WITH FINISH PLANS.2WALLS SHALL INCLUDE SURFACES FROM FLOOR TO CEILING, INCLUDING PILASTERS, FASCIA, JAMBS, DOOR FRAMES,REVEALS, RETURNS, AND ALL VERTICAL SURFACES NOT INCLUDED IN CEILING.3PAINT COLORS SHALL BE SPECIFIED BY SHLEMMER+ALGAZE+ASSOCIATES AND THE GENERAL CONTRACTOR SHALL SUBMITTHREE (3) SAMPLES (12" X 12") OF EACH COLOR SPECIFIED FOR REVIEW BY SHLEMMER+ALGAZE+ASSOCIATES.4ALL WALLS AND CEILINGS SHALL BE PROPERLY PREPARED, SPACKLE, SANDED, ETC. TO PROVIDE A PERFECTLY SMOOTHFINISH AND SURFACE READY FOR PRIME AND PAINT.5ALL EXISTING LOOSE PAINT SHALL BE REMOVED AND SPACKLE OR PLASTER PATCHED.6ALL EXISTING UNEVENNESS IN ALL PARTITIONS SHALL BE SANDED OR CHIPPED AWAY AND SURFACES PLASTER-PATCHEDOR SPACKLED TO INSURE A PERFECTLY EVEN SURFACE.7ALL WOOD SHELVING AND PAINTED DOORS SHALL RECEIVE PRIMING, SANDING AND TWO FULL COATS OF SEMI-GLOSSENAMEL FREE OF BRUSH MARKS, UNLESS OTHERWISE NOTED.8THE CONTRACTOR SHALL REMOVE ALL ELECTRICAL SWITCH PLATES AND OUTLET PLATES, SURFACE HARDWARE, ETC.,PRIOR TO PAINTING, PROTECTING AND REPLACING SAME WHEN PAINTING HAS BEEN COMPLETED. HE SHALL REMOVEALL PAINT FROM WHERE IT HAS SPILLED, SPLASHED OR SPLATTERED ON SURFACES, INCLUDING BUT NOT LIMITED TOLIGHT FIXTURES, DIFFUSERS, REGISTERS AND SLAB FITTINGS, ETC.9THE CONTRACTOR SHALL USE A LATEX BASE PAINT IN COLORS AND FINISHES SELECTED BYSHLEMMER+ALGAZE+ASSOCIATES. CONTRACTOR SHALL PROPERLY PREPARE ALL SURFACES TO RECEIVE ONE (1) PRIMECOAT AND TWO (2) FINISH COATS OF PAINT IN COLOR SELECTED BY SHLEMMER+ALGAZE+ASSOCIATES.11THE CONTRACTOR SHALL EXAMINE ALL AREAS OF CONSTRUCTION AFTER COMPLETION OF WORK BY ALL TRADES(INCLUDING TELEPHONE INSTALLATION, FLOORING, ETC.) AND INDICATE ALL NECESSARY "TOUCH-UP" PAINTING AND/ORPATCHING.12IT IS THE INTENT OF THE DRAWINGS THAT ALL EXPOSED SURFACES RECEIVE FINISHES AS INDICATED ON THE DRAWINGSOR IN THE SPECIFICATIONS UNLESS SPECIFICALLY NOTED OTHERWISE. ANY SURFACES WHICH DO NOT HAVE A SPECIFICFINISH NOTED OR ARE NOTED TO REMAIN UNFINISHED SHALL BE BROUGHT TO THE ATTENTION OFSHLEMMER+ALGAZE+ASSOCIATES AND FINISHED PER SHLEMMER+ALGAZE+ASSOCIATES INSTRUCTION.13 FINISH FRONT SIDE, BACK SIDE AND DOOR EDGES AT STRIKE SIDE AND HINGE SIDE. LEAVE TOP AND BOTTOM UNPAINTEDTO PREVENT WARPING.14PAINT ALL METAL ACCESS DOORS AND ACCESS PANELS TO MATCH ADJACENT WALL OR CEILING FINISH. GRAPHICS ONDOOR OR PANEL (IF ANY) ARE TO BE REPAINTED/RE-APPLIED TO MATCH EXISTING, IF APPLICABLE.15 CLOSET WALL SURFACES ARE TO BE PAINTED TO MATCH THE COLOR OF THE ADJACENT OUTSIDE WALL SURFACES.16ALL PAINT SHALL BE APPLIED IN ACCORDANCE WITH THE MANUFACTURER'S SPECIFICATION FOR THE PARTICULARSURFACE.17ALL SURFACES SHALL BE PROPERLY PREPARED WITH APPROPRIATE SEALER PRIOR TO INSTALLATION OF WALLCOVERINGSAND INSTALLED PER MANUFACTURER'S RECOMMENDATION.18CONTRACTOR TO REFINISH DOORS & FRAMES (REMOVE ALL SCRATCHES AND DINGS) WHEN THEY ARE BEING REUSED.19FACTORY PRIMED HOLLOW METAL DOORS AND FRAMES SHALL BE FINISHED WITH TWO COATS OF SEMI-GLOSS PAINT,UNLESS OTHERWISE NOTED.20ALL BASE TO BE PAINTED SHALL MATCH ADJACENT WALL U.O.N. SEE FLOOR FINISH PLANS FOR LOCATIONS AND FINISHSCHEDULE FOR SPECIFICATION.09 00 00 FINISHES09 22 16.13 - NON-STRUCTURAL METAL STUD FRAMING1THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL ALL PARTITIONS DESIGNATED ON SAA DRAWINGS.2THE GENERAL CONTRACTOR SHALL PROVIDE ALL WALL TYPE AND WALL RATING MARKINGS ON THE FINISH FLOOR OFALL PARTITIONS FOR SAA REVIEW.3UNLESS OTHERWISE NOTED, ALL DIMENSIONS FOR PARTITIONS ARE FROM FINISH FACE OF NEW WALLS, AND/OR FINISH FACE OF EXISTING WALLS. ALL HEIGHTS ARE FROM THE TOP OF THE FINISHED FLOOR UNLESS OTHERWISE NOTED.4WALLS SHOWN ALIGNED WITH BASE BUILDING STRUCTURE SHALL HAVE A FLUSH AND SMOOTH TRANSITION WITH BASEBUILDING STRUCTURE UNLESS OTHERWISE NOTED. 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
199
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA GENERAL NOTES ANDSPECIFICATIONSA-0.3

AS NOTED
10 00 00 SPECIALITIES10 44 16 - FIRE EXTINGUISHERS1A PORTABLE FIRE EXTINGUISHER WITH A MINIMUM 2A10BC RATING SHALL BE PROVIDED EVERY 75' OF TRAVELDISTANCE FROM ANY POINT WITHIN THE AREA DEFINED AS SCOPE OF WORK PER THESE PLANS. PROVIDE FIREEXTINGUISHERS AS REQUIRED BY FIRE DEPARTMENT FIELD INSPECTOR.12 00 00 FURNISHINGS12 21 00 - WINDOW BLINDS1CONTRACTOR IS TO PROVIDE BUILDING STANDARD BLINDS AT ALL EXTERIOR WINDOWS. CONTRACTOR IS VERIFY THECONDITION OF THE EXISTING BLINDS PRIOR TO PRICING. PROVIDE A PRICE TO CLEAN ALL BLINDS. CONTRACTOR IS TOSEAL ALL BLINDS TO PREVENT DUST FROM COLLECTING. IF BLINDS ARE IN NEED OF REPLACEMENT OR MISSING PROVIDEA COST FOR NEW IN THESE LOCATIONS. VERIFY CONDITION OF ALL BLINDS AT WINDOWS PRIOR TO PRICING. ANY NEWBLINDS SHALL MATCH EXISTING, VERIFY MANUFACTURER, STYLE, COLOR AND MOUNTING PRIOR TO PRICING. ANY NEWINTERIOR GLAZING IS TO BE PROVIDED WITH NEW BUILDING STANDARD BLINDS TO MATCH EXISTING.2REPAIR/REPLACE WINDOW COVERINGS WHERE NECESSARY, SEE SHEET A-5.0 FOR SPECIFICATION21 00 00 FIRE SUPPRESSION1EXISTING FIRE SPRINKLER SYSTEM IS BUILDING STANDARD U.O.N.2REWORK FIRE SPRINKLER SYSTEM AS REQUIRED TO ACCOMMODATE NEW CONSTRUCTION AND TO COMPLY WITHCURRENT CODE.3AT ALL GYPSUM BOARD CEILING AREAS USE FULLY CONCEALED SPRINKLER HEADS, COLOR SHALL BE WHITE.4EXTEND/MODIFY FIRE/LIFE SAFETY SYSTEM AS REQUIRED.5IT IS INTENDED THAT FIRE SPRINKLER SYSTEM SHALL BE DESIGN/BUILD BY GENERAL CONTRATOR WITH DEFERREDAPPROVAL.6FIRE SPRINKLER PLANS MUST BE SUBMITTED TO THE CITY FOR REVIEW AND APPROVAL BY APPROPRIATELY LICENSEDCONTRACTOR FOR BUILDING PERMIT ISSUANCE, AND PRIOR TO INSTALLATION OR MODIFICATION OF EXISTING SYSTEM.22 00 00 PLUMBING1FURNISH AND INSTALL ALL PLUMBING ROUGH-INS, FIXTURES AND ACCESSORIES SHOWN ON ALL CONSTRUCTIONPLANS AND DETAIL DRAWINGS UNLESS OTHERWISE NOTED.2THE PLUMBING CONTRACTOR SHALL SUBMIT CUTS OF ALL NEW FIXTURES, FITTINGS AND ACCESSORIES TOSHLEMMER+ALGAZE+ASSOCIATES FOR REVIEW AND APPROVAL.3THE PLUMBING CONTRACTOR SHALL COORDINATE AND INSTALL HIS WORK IN ACCORDANCE WITH MANUFACTURERSPUBLISHED SPECIFICATIONS.4ALL EXISTING PLUMBING BEING ABANDONED SHALL BE CAPPED BEHIND EXISTING FINISHED SURFACES. EXISTINGSURFACES SHALL BE PATCHED TO MATCH EXISTING SURROUNDING SURFACES IN MATERIAL AND FINISH. THE GENERALCONTRACTOR SHALL ALSO INCLUDE IN HIS BID A COST FOR WORK FOR CEILING REMOVAL AND REINSTALLATIONREQUIRED FOR PLUMBING WORK IN CEILING PLENUM OF FLOOR BELOW TO COMPLETE WORK ON FLOOR BEINGRENOVATED.5THE PLUMBING CONTRACTOR SHALL COORDINATE HIS WORK WITH ALL OTHER TRADES.6FURNISH ALL VALVES AS INDICATED ON THE DRAWINGS OR AS MAY BE REQUIRED FOR THE PROPER CONTROL OF THEVARIOUS APPARATUS AND PIPELINES INSTALLED UNDER THIS SECTION SO THAT ANY FIXTURES PIPE OR APPARATUSMAY BE CUT OFF FOR REPAIR WITHOUT INTERFERENCE OR INTERRUPTION OF THE SERVICE TO THE REST OF THEBUILDING.7BEFORE BEING COVERED UP OR BUILT-IN ALL PIPING SHALL BE TESTED AS REQUIRED BY THE AUTHORITIES HAVINGJURISDICTION.8TOILET FLUSH CONTROLS PROVIDED AND INSTALLED AS PART OF THE WORK SHALL BE OPERABLE WITH ONE HAND ANDSHALL NOT REQUIRE TIGHT GRASPING, PINCHING OR TWISTING OF THE WRIST. CONTROLS FOR THE FLUSH VALVESSHALL BE MOUNTED ON THE WIDE SIDE OF THE TOILET AREAS: NO MORE THAN 44" ABOVE THE FLOOR. THE FORCEREQUIRED TO ACTIVATE THE CONTROLS SHALL BE NOT GREATER THAN 5 POUNDS.9OTHER FLUSH CONTROLS PROVIDED AND INSTALLED AS PART OF THE WORK SHALL BE OPERABLE WITH ONE HAND,AND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE WRIST AND SHALL BE MOUNTED NOMORE THAN 44" ABOVE THE FLOOR. THE FORCE REQUIRED TO ACTIVATE CONTROLS SHALL NOT BE GREATER THAN 5POUNDS.10FAUCET CONTROLS OR OTHER PLUMBING FIXTURE OPERATING MECHANISMS SHALL BE OPERABLE WITH ONE HANDAND SHALL NOT REQUIRE TIGHT GRASPING, PINCHING, OR TWISTING OF THE WRIST. THE FORCE REQUIRED TOACTIVATE THE CONTROLS SHALL BE NO GREATER THAN 5 POUNDS. LEVER OPERATED, PUSH TYPE AND ELECTRONICALLYCONTROLLED MECHANISMS ARE EXAMPLES OF ACCEPTABLE DESIGNS. SELF CLOSING VALVES ARE ALLOWED IF THEFAUCET REMAINS OPEN FOR AT LEAST 10 SECONDS.11418.5 FLOOR SLOPE. FLOORS SHALL BE SLOPED TO FLOOR DRAINS.23 00 00 HVAC1THE HVAC ENGINEER WILL PROVIDE NECESSARY ENGINEERING DRAWINGS TO REWORK ALL EXISTING EQUIPMENT.2SUBMIT SHOP DRAWINGS INDICATING ALL NEW WORK AND ALL EXISTING EQUIPMENT TO REMAIN INCLUDINGDIFFUSERS, THERMOSTATS AND ANY REQUIRED ACCESS PANELS, TO SHLEMMER+ALGAZE+ASSOCIATES. FOR REVIEWPRIOR TO PROCEEDING WITH FABRICATION AND/OR INSTALLATION OR RELOCATION.3THE HVAC CONTRACTOR SHALL BE RESPONSIBLE FOR FIELD SUPERVISION OF ALL THEIR WORK DURING INSTALLATIONAND SHALL INSPECT ALL SYSTEMS FOR PROPER OPERATIONS AT COMPLETION OF THE JOB.4INTERIOR SPACES SHALL BE MECHANICALLY VENTILATED IN ACCORDANCE WITH THE LOCAL BUILDING CODE. PLANSSHOWING MECHANICAL VENTILATION SYSTEM WILL BE FILED IN ACCORDANCE WITH THE LOCAL BUILDINGDEPARTMENT.5ANY BUILDING SERVICE SHUT DOWNS REQUIRED FOR THIS WORK SHALL BE REQUIRED IN WRITING BY THE HVACCONTRACTOR AT LEAST 72 HOURS IN ADVANCE OF THE SHUT DOWN. THE HVAC CONTRACTOR SHALL OBTAINAPPROVAL FROM ALL AUTHORITIES HAVING JURISDICTION PRIOR TO SHUT DOWN. ANY SHUT DOWN AFFECTING THENORMAL HVAC SERVICE OF OTHER BUILDING OCCUPANTS SHALL BE DONE ON OVERTIME AND OFF HOURS.6BALANCING OF ENTIRE SYSTEM SHALL BE DONE BY AN INDEPENDENT AIR BALANCE COMPANY. SUBMIT REPORT TOSHLEMMER+ALGAZE+ASSOCIATES AND BUILDING OWNER.7ALL DUCT WORK SHALL BE INSULATED PER CODE REQUIREMENTS FOR THERMAL AND ACOUSTIC CONSIDERATIONS. 8MECHANICAL VENTILATION IN TOILET ROOM SHALL PROVIDE ONE (1) COMPLETE AIR CHANGE EVERY FIFTEEN (15)MINUTES AND SHALL BE VENTED TO OUTSIDE AIR.9ALL NEW MATERIALS REQUIRED SHALL BE EQUAL TO OR BETTER IN QUALITY THAN THE EXISTING.10ALL NEW DIFFUSERS SHALL MATCH APPEARANCE OF EXISTING.11THE HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS SHALL ACCOMMODATE THE NEW OCCUPANCY. ALLROOMS AND AREAS SHALL HAVE SUPPLY AND RETURN AIR. THERMOSTATS SHALL HAVE AUTOMATIC CHANGEOVERFEATURE, (NO MANUAL SWITCHING FROM HEATING TO COOLING CYCLES), WITH METAL, NON VISUAL TAMPER PROOFCOVERS.12PRIOR TO INSTALLATION, HVAC ZONES AND T-STAT LOCATIONS SHALL BE APPROVED BY TENANT & COORDINATEDWITH FURNITURE PLANS AND WALL FINISH LOCATIONS.13CONTRACTOR TO VERIFY WITH ARCHITECT IF LINEAR DIFFUSER IS REQUIRED WHERE CEILING SYSTEM IS GYP. BOARD.14REWORK ALL EXISTSING HVAC SYSTEM TO ACCOMMODATE NEW CONSTGRUCTION.15FIRE DAMPERS OR DOORS SHALL BE PROVIDED WHERE AIR DUCTS PENETRATE FIRE RATED WALLS OR CEILING AS PER2022 CBC SECTION 716. SMOKE DAMPERS SHALL BE PROVIDED WHERE AIR DUCTS PENETRATE FIRE RATED WALLS ORCEILING AS PER 2022 CBC SECTION 716. 16THE GENERAL CONTRACTOR SHALL SUPPLY ALL RETURN AIR OPENINGS IN SLAB TO SLAB PARTITIONS ABOVE HUNGCEILINGS TO MATCH AREA CALCULATIONS REQUIREMENTS AS SHOWN ON ENGINEERING DRAWINGS. ALL OPENINGS INDEMISING AND SOUND ATTENUATED WALLS TO HAVE SOUND BOOTS.17DESIGN/BUILD DOCUMENTS SHALL COORDINATE EXISTING DIFFUSER AND SPRINKLER HEAD LOCATIONS. CONTRACTORTO RELOCATE DIFFUSERS AND/OR SPRINKLER HEADS AS REQUIRED BY BUILDING CODE. CONTRACTOR TO PROVIDELOCATION LAYOUT TO SAA PRIOR TO INSTALLATION.26 00 00 ELECTRICAL1THE CONTRACTOR SHALL COORDINATE ALL ELECTRICAL WORK WITH MANUFACTURERS SPECIFICATIONS.2THE WORK SHALL BE INSTALLED IN STRICT ACCORDANCE WITH THE REQUIREMENTS OF THE NATIONAL BOARD OF FIREUNDERWRITERS, PUBLIC UTILITIES COMPANY, TELEPHONE COMPANY AND ALL OTHER AUTHORITIES HAVINGJURISDICTION.3ALL NEW MATERIALS SPECIFIED SHALL COMPLY WITH THE STANDARDS OF THE UNDERWRITERS LABORATORIES, INC. INEVERY CASE WHERE SUCH A PARTICULAR TYPE OF MATERIAL IS SPECIFIED, UNLESS OTHERWISE NOTED.4VERIFY LOCATION OF FLOOR MONUMENT CORES WITH SAA IN THE FIELD PRIOR TO THE START OF ANY CORING.REFERALSO TO SECTION 01 73 29 - CUTTING AND PATCHING. (COORDINATE CORE LOCATION WITH MILLWORK ANDFURNITURE LAYOUT). PROVIDE CONDUIT DISTRIBUTION FROM CORES TO WALL STUB-UPS. PROVIDE FIRE SAFING ANDSMOKE SEALANT AT FLOOR PENETRATIONS AS REQUIRED.5PROVIDE FIRE CAULKING AND OR ACOUSTICAL CAULKING AT OUTLETS AT ACOUSTICAL AND FIRE RATED PARTITIONS.TYPICAL DIMENSION RANGE GIVEN AT ALL PRIVATE OFFICES IS A GENERAL GUIDELINE. OUTLETS ON EITHER SIDE OFTHE WALL SHOULD SHIFT, 6" TO 12" IN OPPOSITE DIRECTIONS.6NO "BACK-TO-BACK" OUTLETS ARE PERMITTED WITHIN A WALL. OUTLETS MUST BE STAGGERED IN LOCATION ANDINSTALLED IN SEPARATE STUD CAVITIES.7REFER TO DETAIL ON SHEET A-0.1 FOR TYPICAL INSTALLATION HEIGHT OF ALL WALL MOUNTED DEVICES, SWITCHES,OUTLETS, AND THERMOSTATS. LOCATE TOP OF THERMOSTATS, PULL BOXES, CONTROL DEVICES ANDSWITCHES/DIMMERS AT A MAXIMUM OF 48" ABOVE FINISHED FLOOR TO TOP OF OUTLET BOX. WHERESWITCHES/DIMMERS ARE GANGED TOGETHER, PROVIDE A SINGLE PIECE COVERPLATE8THE ELECTRICAL CONTRACTOR SHALL SUBMIT CUTDHEETS OF ALL FIXTURES AS DIRECTED.9THE ELECTRICAL CONTRACTOR SHALL COORDINATE ANY ELECTRICAL OR LIGHTING INSTALLATION INTO THE CABINETWORK WITH THE CABINET CONTRACTOR AS REQUIRED. 26 00 00 ELECTRICAL CONTINUED10THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL TEMPORARY LIGHTING AND ELECTRICAL SERVICE FOR ALL TRADESAS REQUIRED.11ALL ELECTRICAL, TELEPHONE RECEPTACLES AND LIGHT FIXTURES SHALL BE LOCATED AS DIMENSIONED ON SAA PLANS.12ALL NEW OUTLETS ON COLUMNS WILL BE CENTERED ON FACE SHOWN, UNLESS OTHERWISE NOTED.13POWER AND TELEPHONE OUTLETS SHOWN ON PLANS ARE NOT INCLUSIVE OF ALL OUTLETS REQUIRED BY OWNER.CONTRACTOR SHALL VERIFY WITH OWNER ALL REQUIRED OUTLETS PRIOR TO COMPLETING WALL CONSTRUCTION.14THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL POWER WIRING. ALL ELECTRICAL WIRING SHALL BE PLACED INCONDUIT.15UNLESS OTHERWISE NOTED, ALL OUTLETS SIDE BY SIDE SHALL BE 6" FROM CENTER OF PLATE WITH POSITIONINGDIMENSIONS CENTERED BETWEEN.16ALL ELECTRICAL AND TELEPHONE WIRING CONDUIT SHALL BE CONCEALED IN PARTITIONS AND/OR CEILING.17THE ELECTRICAL AND/OR GENERAL CONTRACTOR SHALL PROVIDE ALL CUTTING AND PATCHING OF ALL CHASES INFLOORS, WALLS, AND CEILINGS, AS REQUIRED.18PROVIDE NEW BLANK COVER PLATES FOR ABANDONED OUTLET LOCATIONS.19CONVENIENCE RECEPTACLES SHALL BE DUPLEX TYPE RATED 15 AMP, 125 V., GROUNDED TYP., UNLESS OTHERWISENOTED.20THE ELECTRICAL CONTRACTOR WILL COORDINATE HIS WORK WITH THE AIR CONDITIONING ENGINEER ANDCONTRACTOR PRIOR TO EXECUTING HIS WORK.21AS IT RELATES TO THIS SET OF DOCUMENTS A DEDICATED CIRCUIT (DC) SHALL BE A SINGLE CIRCUIT WITH MULTIPLEOUTLETS DEDICATED TO A SPECIFIC EQUIPMENT USAGE.22ELECTRICAL CONTRACTOR TO FIELD VERIFY THAT ALL CIRCUITS AT THE MAIN PANEL ARE ADEQUATE FOR NEWREQUIREMENTS, AND SHALL INSTALL NEW CONDUIT, CIRCUITS, AND PANELS IF REQUIRED.23ALL EXPOSED ELECTRICAL DEVICES, I.E. SWITCHES, STROBES, OUTLETS, WALL TELEPHONE MOUNTS, ETC. AND ALLCOVERPLATES TO MATCH "BLDG. STD.".24GENERAL CONTRACTOR IS TO VERIFY THE POWER REQUIREMENT AND CIRCUITING OF ANY SPECIALTY EQUIPMENTDURING ROUGH IN ELECTRICAL TO INSURE THE PROPER VOLTAGE AND CIRCUIT CONFIGURATION.25GENERAL CONTRACTOR IS TO HAVE FURNITURE VENDOR APPROVE ALL POWER AND TELEPHONE FEEDS FORWORKSTATIONS PRIOR TO INSTALLATION. G.C. IS TO HAVE FURNITURE VENDOR APPROVE ALL ELECTRICAL AND DATA INPRIVATE OFFICES PRIOR TO INSTALLATION.26FURNITURE VENDOR FOR EITHER WORKSTATIONS OR CASEWORK SHALL FIELD VERIFY LAYOUT TO VERIFY CLEARDIMENSIONS REQUIRED FOR FURNITURE PRIOR TO ORDERING FURNITURE. DO NOT SCALE THE DRAWINGS.27CONTRACTOR MUST COORDINATE ALL ELECTRICAL OUTLETS FOR FURNITURE WITH FURNITURE CONTRACTOR BEFOREPLACEMENT IN FIELD.28CONTRACTOR SHALL PROVIDE ELECTRICAL DRAWINGS STAMPED AND SIGNED BY LICENSED ENGINEER. PROVIDECOMPLETE WORKING DRAWINGS, CALCULATIONS AND DESCRIPTIVE DATA AS REQUIRED TO OBTAIN PERMITS FORTENANT ELECTRICAL WORK. (DOES NOT ALWAYS APPLY)29LABEL ALL JUNCTION BOXES WITH CIRCUITS. LABEL PANEL WITH PREPRINTED TYPEWRITTEN PANEL SCHEDULE.30ALL CONDUIT SHALL BE EMT OR FLEX, NO BX OR PREWIRED CABLE ALLOWED.31ALL ELECTRICAL OUTLETS TO BE 120V. SINGLE PHASE AND MINIMUM 15 AMPS 3-WIRE GROUNDED WITH 1/2"CONDUIT. (UNLESS OTHERWISE NOTED)32PROVIDE SUPPORT FOR ALL CONDUITS ABOVE THE CEILING AS REQUIRED PER CODE.33ENSURE THAT ROOM SEPARATION OF LIGHTING IS MAINTAINED BY PROVIDING SWITCHING REQUIRED TO ACCOMPLISHTHIS.34ELECTRICAL ENGINEER WILL BE RESPONSIBLE FOR EMERGENCY LIGHTING CALCULATIONS AND SPECS.35IF LIGHT FIXTURES ARE TO BE REUSED/RELOCATED, CONTRACTOR SHALL CLEAN & RE-LAMP TO MATCH. ALL LIGHTSAND FIXTURES OF THE SAME TYPE (NEW AND EXISTING) SHALL HAVE MATCHING LAMPS.36ALL SWITCHING AND LIGHTING LAYOUTS SHALL COMPLY WITH TITLE 24. 37VERIFY QUANTITY OF LIGHT FIXTURES BETWEEN ARCHITECTURAL DRAWINGS AND ENGINEERING DRAWINGS. IFQUANTITY IS DIFFERENT NOTIFY ARCHITECT DURING BIDDING.26 52 00 - SAFETY LIGHTING1GENERAL CONTRACTOR SHALL PROVIDE AN EMERGENCY EXIT AND EXIT LIGHTING SYSTEM AS REQUIRED BYGOVERNING JURISDICTIONS.2GENERAL CONTRACTOR TO PROVIDE EXIT SIGNS READILY VISIBLE TO CLEARLY INDICATE THE DIRECTION OF EGRESSTRAVEL. EXIT SIGNS SHALL BE PROPERLY ILLUMINATED. (2022 CBC 1013.5 AND 1013.6) ALL EXIT SIGN GRAPHICS,ILLUMINATION, AND POWER SOURCE MUST COMPLY WITH (2022 CBC 1013.5 AND 1013.6) 3CONTRACTOR MUST COMPLY WITH (2022 CBC 1013.5 AND 1013.6) FOR THE EXIT SIGN GRAPHIC, ILLUMINATION, ANDPOWER SOURCE.4THE MEANS OF EGRESS, INCLUDING THE EXIT DISCHARGE SHALL BE ILLUMINATED AT ALL TIMES THE BUILDING SPACESERVED BY THE MEANS OF EGRESS IS OCCUPIED. THE MEANS OF EGRESS ILLUMINATION LEVEL SHALL NOT BE LESSTHAN 1 FOOT-CANDLE (11-LUX) AT THE WALKING SURFACE LEVEL. (2022 CBC 1008.1, 1008.2) 5EXIT ILLUMINATION SHALL COMPLY WITH 2022 CBC SECTION 1008 AND 1013. 6EXIT SIGNS SHALL BE INSTALLED AT REQUIRED EXIT DOORWAYS AND WHERE OTHERWISE NECESSARY TO CLEARLYINDICATE THE DIRECTION OF EGRESS WHEN THE EXIT SERVES AN OCCUPANT LOAD OF 50 OR MORE.EXCEPTION: MAIN EXTERIOR EXIT DOORS WHICH OBVIOUSLY AND CLEARLY ARE IDENTIFIABLE AS EXITS NEED NOT BESIGNED WHEN APPROVED BY THE BUILDING OFFICIAL.7WHEN NECESSARY, THE FINAL LOCATION AND QUANTITY OF EXIT SIGNS SHALL BE DETERMINED BY THE FIREDEPARTMENT PRIOR TO CONSTRUCTION OF ANY WORK.8THE COLOR AND DESIGN OF LETTERING, ARROWS AND OTHER SYMBOLS ON EXIT SIGN SHALL BE IN HIGH CONTRASTWITH THEIR BACKGROUND (3/4" X 6" LETTERS MIN.)27 00 00 COMMUNICATIONS1ALL FIXTURES PROVIDED FOR DATA CABLING SHALL COMPLY WITH DATA CONSULTANT'S PERFORMANCE CRITERIA. (EG:CAT5, ECAT5, CAT6...)2ALL FIRE PREVENTION WIRING IS TO BE PLACED IN CONDUIT.3FIRE RATED TEFLON PLENUM CABLES SHALL BE USED FOR TELEPHONE AND ANY LOW-VOLTAGE CIRCUITS NOT INCONDUIT.4PROVIDE TELEPHONE OUTLET BOXES (WHERE SHOWN ON "ELECTRICAL/ TELEPHONE PLAN") AND ALL NECESSARYCONDUIT RUNS TO TELEPHONE EQUIPMENT AS REQUIRED.5ALL TELEPHONE WIRING CONDUIT SHALL BE CONCEALED IN PARTITIONS AND/OR CEILING.6PROVIDE CONDUIT FROM SERVER ROOM TO CEILING FOR HORIZONTAL CABLE DISTRIBUTION. DATA VENDOR TOCONFIRM SIZE AND QUANTITY OF CONDUITS.7CONTRACTOR TO COORDINATE TELEPHONE/ DATA CONDUIT SIZE REQUIREMENTS WITH CLIENTS TELEPHONE/ DATAVENDOR.8CONTRACTOR TO PROVIDE CONDUIT AND NECESSARY CONNECTIONS BETWEEN TENANT'S TELEPHONE EQUIPMENTAND BUILDING MAIN TELEPHONE CLOSET. SIZE AS REQUIRED BY TENANT VENDOR.28 46 00 FIRE DETECTION AND ALARM1SMOKE DETECTORS SHALL BE INSTALLED IN TENANT SPACE BY LICENSED ALARM SYSTEMS CONTRACTOR, WORK SHALLBE CONNECTED TO EXISTING BUILDING SYSTEM.2REWORK FIRE/LIFE SAFETY SYSTEM AS REQUIRED TO COMPLY WITH CURRENT CODE.3PROVIDE EMERGENCY NOTIFICATION SYSTEM FOR THE HEARING AND VISUAL IMPAIRED PER A.D.A. REQUIREMENTSAND 2022 CBC 11B-215.

CONSTRUCTION SPECIFICATIONS

1.GARBAGE DISPOSAL, REFER TO SPECIFICATION BELOW:MANF..: INSINKERATORMODEL: BADGER - CONTINUOUS FEEDHP: 3/4POWER: 120 VOLTS, 60 HERTZ, 9.5 AMPNOTE #1: SWITCH AT WALL.NOTE #2: POWER CONNECTION: LINE CORD.2.FULL SIZE REFRIGERATOR, REFER TO SPECIFICATION BELOW:MANF.:FISHER & PAYKELMODEL:21.7 CU. FT. FREESTANDING REFRIGERATOR WITH BOTTOMFREEZER, 32:, 17.1 CU FT ICENUMBER:RF170WDRJXS (RIGHT HINGE)NUMBER: RF170WDLIXS (LEFT HINGE)POWER:STANDARD 120 VOLT DUPLEX, 60HZ., 15ASIZE:67-1/2" HIGH, 31-3/32" DEEP, 27-3/8" WIDENOTE #1:FACTORY INSTALLED ICE MAKER, PROVIDE WATER LINE FOR ICEMAKER.NOTE #2:GLASS SHELVES3DISHWASHER, REFER TO SPECIFICATION BELOW:MANF.:ASKO 24" DISHWASHERMODEL: 30 SERIES - DB1663THS - TUBULAR HANDLESIZE:23-7/8"W X 22"D X 32-3/4" (SEE NOTE FOR ADA)COLOR:STAINLESS STEELPOWER:115 VAC, 60HZNOTE #1:PER MANUFACTURER: CAN BE REDUCED TO 32-1/4" BY REMOVING TOP TRIMAND LOWER SIDE TRIM.4.MICROWAVE OVEN, REFER TO SPECIFICATION BELOW:MANF.:GENERAL ELECTRIC PROFILE SERIESMODEL:PES7227SLSSDESCRIPTION:2.2 CU. FT. COUNTERTOP SENSOR MICROWAVE OVENSIZE:24-1/8" WIDE, 14" HIGH, 19-3/4" DEEPCOLOR:STAINLESS STEELPOWER:120 VOLTS, 60HZ, 13.9 AMPS5.UNDER COUNTER ADA REFRIGERATOR, REFER TO SPECIFICATION BELOW:MANF..: ACCUCOLDMODEL: FF67SSHHADASIZE: 32" HIGH X 23-3/4" WIDE X 23-1/2" DEEPCOLOR: STAINLESS STEELPOWER: STANDARD 120 VOLT DUPLEXNOTE:PROVIDE LOCK AT REFRIGERATORLOCATION: MED ROOM #144 & TREATMENT ROOM #1676.UNDER COUNTER ADA REFRIGERATOR, REFER TO SPECIFICATION BELOW:MANF..: PERLICKMODEL: 24" ADA COMPLIANT SERIES HB24RSFINISH: STAINLESS STEELPOWER:120 VAC/60 HZ/1 PHSIZE: 32-1/8" HIGH X 24" WIDE X 24" DEEPNOTE : 24" FULL LENGTH STAINLESS STEEL VERTICAL PULLLOCATION: MOTHER'S ROOMS7. TOP LOAD WASHER AND ELECTRIC DRYER, REFER TO SPECIFICATION BELOW:MANF.:SPEED QUEENMODEL:26 INCH TOP LOAD WASHER TR3003WN27 INCH ELECTRIC DRYER DR300WEPOWER: WASHER : 120 V, 15A, 60 HZDRYER : 240 V, 30A,SIZE: WASHER: 42-3/4" H X 28" D X 25-5/8" WDRYER: 42-3/4" H X 28" D X 26-7/8" WNOTE #1:PROVIDE FLEXIBLE METAL VENT KIT.REFER TO ENGINEERING DRAWINGS FOR VENT REQUIREMENTS.

EQUIPMENT SPECIFICATIONS

1.SEMI-RECESSED FIRE EXTINGUISHER CABINET, REFER TO SPECIFICATION BELOW:MANF.:POTTER-ROEMERNAME:1700 SERIESMODEL:1734-DVL-RR (3" ROLLED EDGES) (NON RATED)SIZE:11-3/4" WIDE x 26-3/4" HIGH x 6" DEEPMODEL:FRC1734-DVL-RR (ROLLED EDGES) (RATED)SIZE:11-3/4" WIDE X 26-3/4" HIGH x 6-7/8" DEEP PAINT EXTERIOR TO MATCHADJACENT WALL.FIN.:INTERIOR OF CABINET IS TO REMAIN STANDARD WHITE FINISH.MT. HT.:TOP OF CABINET AT 50 1/2" A.F.F.NOTE 1:USE SEMI-RECESSED STYLE WALL MOUNT.NOTE 2:AT FIRE RATED CONDITION A MINIMUM OF 3-5/8" STUDS MUST BE USED.NOTE 3:PROVIDE CABINET LETTERS 1961.NOTE 4:REFER TO DETAIL 9/A-30.0.NOTE 5:PROVIDE WITH EXTINGUISHER 3006, 3010, 3306, 3310 AND 3405.2.SINGLE COMPARTMENT SINK, REFER TO SPECIFICATION BELOW:MANF.:JUSTNAME: ADA COMPLIANT UNDERMOUNTMODEL:US-ADA-1830-A-18GA. (DRAIN LOCATION CENTER REAR)SIZE:16" LONG X 28" WIDE X 5" DEEP - VERIFY ADA CLEARANCES BEFORE ORDERING FIN.:18 GA. TYPE 304 18-8 STAINLESS STEEL. UNDERSIDE IS FULLY UNDERCOATED.NOTE #1:ONE (1) FAUCET HOLES FURNISHED, U.O.N.,NOTE #2:LEVER FAUCET TO BE:MANF..:KOHLER FAUCETSMODEL:CRUE K-22974DESCRIPTION:TOUCH LESS PULL-DOWN SINGLE-HANDLE KITCHEN FAUCETSIZE:17-3/16" HIGH, 4-3/16" WIDE, 8-9/16" DEEP FINISH:POLISHED CHROME (CP)POWER:120 V AC REQUIRED3. BOTTLE FILLER, REFER TO SPECIFICATION BELOW:MANF.:MURDOCKNAME: REFRIGERATED SURFACE MOUNT SENSOR OPERATED BOTTLE FILLERMODEL:BF168 SERIESSIZE:53" HIGH X 23-3/4" WIDE X 19" OVERALL DEPTHNOTE #1:PROVIDE WATER CONNECTION AND POWER PER MANUFACTURER SPECS.NOTE #2:PROVIDE WATER FILTRATION PER MANUFACTURER SPECS.4. DOUBLE COMPARTMENT SINK, REFER TO SPECIFICATION BELOW:MANF..: ELKAYNAME:DOUBLE BOWL LUSTERTONE UNDERMOUNT ADA SINK WITH PERFECT DRAINMODEL:ELUHAD311850PD (DRAIN LOCATION AT REAR)SIZE:30-3/4" LONG X 18-1/2" WIDE X 4-7/8" DEEPFIN.: STAINLESS STEELNOTE #1: FAUCET HOLES PER FAUCET SPECS.NOTE #2:LEVER FAUCET TO BE:MANF..:KOHLER FAUCETSMODEL:CRUE K-22974DESCRIPTION:TOUCH LESS PULL-DOWN SINGLE-HANDLE KITCHEN FAUCETSIZE:17-3/16" HIGH, 4-3/16" WIDE, 8-9/16" DEEP FINISH:POLISHED CHROME (CP)POWER:120 V AC REQUIRED5.SINGLE COMPARTMENT SINK AT MOTHER'S ROOMMANF..: JUSTNAME: ADA COMPLIANT UNDERMOUNTMODEL: US-ADA-1618A-A-18GA. (DRAIN LOCATION CENTER REAR)SIZE:16" LONG X 18" WIDE X 5" DEEPFIN:18 GA. TYPE 304 18-8 STAINLESS STEEL. UNDERSIDE IS FULLY UNDERCOATED.NOTE #1:LEVER FAUCET TO BE:MANF..:ELKAYMODEL:LK721CDESCRIPTION:ELKAY COMMERCIAL ELECTRONIC SENSOR SCRUB/HANDWASH POWEREDDECK MOUNT FAUCETFINISH:CHROME FINISHLOCATION:MOTHER'S ROOM ONLY.NOTE: PROVIDE AC PLUG IN ADAPTOR. 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
200
XX
K-5016-ETDEXTERC_URINALSVITREOUS CHINAK-5016-ETDEXTERC_URINALSVITREOUS CHINA K-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINA K-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINA K-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINAK-3427HIGHLINETOILETSVITREOUS CHINA 271312714127121
8-
19-END OF STALL (CURB, STRIPING, ETC.)NO PARKING12-ALIGN18'-0" MIN.ACCESSIBLE STALL5'-0" MIN. STD.,LOCATED ONEITHER SIDE OFACCESSIBLE STALL(OR 8'-0" MIN.VAN ACCESSIBLE,LOCATED ON THEPASSENGER SIDE)℄ REF. PLANMIN. WIDTH PERMUNICIPAL CODEREF. PLANMIN. LENGTH PERMUNICIPAL CODECONCRETE WHEEL STOP AS NEEDED TO PREVENTENCROACHMENT OF CARS INTO THE ACCESSIBLEPATH OF TRAVEL16-ACCESS AISLE MARKED WITH A 4" WIDEBORDERLINE PAINTED BLUE, AND INTERIORMARKED WITH 4" WIDE HATCH LINES 36" O.C.MAX. PAINTED A COLOR CONTRASTING THAT OFTHE AISLE SURFACE (PREFERABLY BLUE OR WHITE)CBC 2022 SEC. 11B-502.3.3.36"O.C.MAX.THE WORDS "NO PARKING" WITHIN THE ACCESSAISLE IN 12" HIGH MIN. LETTERING.℄ 24" EQ.℄EQ.℄℄9'-0" MIN.ACCESSIBLE STALLADDITIONAL NOTES:1. THE SURFACE OF ALL ACCESSIBLE PARKING STALLS & ACCESS AISLES MUST BE STABLE,FIRM, AND SLIP-RESISTANT WITH NO MORE THAN 2.0% MAX SLOPE IN ANY DIRECTION.2. EACH ACCESS AISLE MUST CONNECT TO AN ACCESSIBLE ROUTE OF TRAVEL ANDACCESSIBLE PARKING MUST BE ARRANGED SO THAT PERSONS USING THEM ARE NOTREQUIRED TO TRAVEL BEHIND PARKED VEHICLES OTHER THAN THEIR OWN. 1'-0"60" A.F.F. MIN. MEASURED TOTHE BOTTOM OF THE SIGN(S)(80" A.F.F. MIN. IF LOCATEDWITHIN A CIRCULATION PATH).EQUAL FOR ALL STALL SIGNS2'-0" 1'-0"4"2'-6"1'-8"2" X 3" X 3/16" GALV. STEEL TUBE AND PAINTED,CAP TUBE END.12" X 24 REFLECTORIZED SIGN. WHEEL CHAIRSHALL BE WHITE ON BLUE BACKGROUND WITH"MINIMUM FINE $250" 1'-5"7"
COLOR:BORDER & LEGEND - WHITE (RETROREFLECTIVE)BACKGROUND - BLUE (RETROREFLECTIVE) FED-STD 595COLOR FS 15090 20-NOTE: PROVIDE THE WORDS "VANACCESSIBLE" BELOW THE ISA WHERE OCCURS.ALTERNATIVELY AN ADDITIONAL VANACCESSIBLE SIGN MAY BE ADDED BELOW.CONCRETE FOOTINGFINSH GRADE / PAVEMENT 1'-0"1'-0"1 1/4"8"1/2"3"3/4"3"1/2"2"3/4"2"1 1/4"1/2"1/2"2'-0" 1"8"1/2"3"1"3"1 1/2"2"1"2"2"2"1'-6"9"R99B (CA)R99C (CA)R99 (CA) COLOR:BORDER & LEGEND - WHITE (RETROREFLECTIVE)BACKGROUND - BLUE (RETROREFLECTIVE) FED-STD 595 COLOR FS 15090 OR6"R7-8B (CA)60" A.F.F. MIN. MEASURED TO THE BOTTOM OF THE SIGN(S)(80" A.F.F. MIN. IF LOCATED WITHIN A CIRCULATION PATH).EQUAL FOR ALL STALL SIGNSNOTE: PROVIDE THE WORDS "VANACCESSIBLE" BELOW THE ISA WHERE OCCURS.ALTERNATIVELY AN ADDITIONAL VANACCESSIBLE SIGN MAY BE ADDED BELOW. 70 SQUARE INCHESMINIMUM
6"8"1'-0"
24" OR AS OTHERWISE REQUIRED TO PREVENTENCROACHMENT OF VEHICLES INTO THE REQUIREDPATH OF TRAVEL (OR AS OTHERWISE PRESCRIBED BYTHE AUTHORITY HAVING JURISDICTION)PARKING STALLPRE-CAST CONC.WHEEL STOPCONCRETE ORA.C. PAVINGNO. 4 REBARNOTE:USE 6'-0" LONG WHEEL STOP AT DOUBLE STALL CONDITIONS CENTERED ON STRIPINGUSE 4'-0" LONG WHEEL STOP AT SINGLE STALL CONDITIONS 1'-0" FROM CENTERLINE OF STRIPINGACCESSIBLE PARKING STALL EMBLEM MIN. 36"X36"BORDER PAINTED WHITE, INTERNATIONAL SYMBOL OFACCESSIBILITY PAINTED WHITE, BACKGROUND PAINTED BLUEPER CBC 2022 SEC. 11B-703.7.2.1. 36"
36"3"3"3"14"2"3"5 5/8"5"5"2"3"7"12 1/2"2"2"2"R8 1/4"73º2"THE WORDS "NO PARKING" SHALL BE PROVIDED WITHIN THE ACCESS AISLE PAINTED IN WHITE LETTERS NO LESS THAN 12 INCHES HIGH AND LOCATEDTO BE VISIBLE FROM THE ADJACENT VEHICULAR WAY. CBC 2022 SEC. 11B-502.3.3.1'-0"4"1'-0"1 1/2"2" MOUNTING HEIGHT.CL.BLANK SPACES TO BE FILLED IN WITHAPPROPRIATE INFORMATION AS A PERMANENTPART OF THE SIGN. VERIFY LOCATION AND PHONENUMBER WITH OWNER PRIOR TO FABRICATION.

LETTERING TO BE HELVETICA MEDIUM(UPPER CASE) 1" MIN. HEIGHT12 GA. GALV. SHEET METAL (NOT ROLLED)17" MIN.22" MIN.3'-6"TOW-AWAY SIGN TO BE POSTED EITHER:1. IN A CONSPICUOUS PLACE AT EACH ENTRANCE TO AN OFF-STREET PARKING FACILITY.2. IMMEDIATELY ADJACENT TO AND VISIBLE FROM EACH PARKING SPACE. (a) TYPICAL PLAN(b) TYPICAL SECTION A-A0.2"
TITLE 24 ACCESSIBILITY COMPLIANT TRUNCATEDDOME/DETECTABLE WARNING SYSTEM.TACTILE PANELS TO BE: DURABLE FOR MEDIUMTRAFFIC AND HIGH IMPACT RESISTANCE, TO BEFEDERAL APPROVED COLOR STANDARD YELLOW, SLIPRESISTANCE, AND DESIGNED FOR VISUALLY IMPAIREDTO FEEL THE RAISED TRUNCATED DOMES WITH THEIRFEET IN COMBINATION WITH THE TAPPING CANE.TACTILE PANELS TO BE SURFACE-APPLIED TO EXISTINGPARKING SURFACE AND CURB RAMP. CAULK ALLAROUND ENTIRE INSTALLATION OF BEVELED TACTILEPANEL EDGES. GENERAL CONTRACTOR TO ENSURETHE CHANGE IN LEVEL OF TACTILE PANEL EDGES TOEXISTING SURFACE DO NOT EXCEED 1/4" HEIGHT MAX.OR 1/2” HEIGHT MAX. WITH BEVEL.

AA2.3"-2.4"NOMINAL0.9"AT BASE0.45"AT TOP2.3"-2.4"NOMINALTRUNCATED DOMES/DETECTABLE WARNING SYSTEM Ø0.45-0.47"Ø0.9-0.92"48" MIN.TOP LANDING
(a) PERPENDICULAR CURB RAMP
(b) PARALLEL CURB RAMP2.0% MAX2.0% MAX.2.0% MAX8.3% MAX.10.0% MAX10.0% MAX2.0% MAX.5.0% MAX.5.0% MAX.SLOPE OF ADJOININGGUTTER OR ROADWAY

2.0% MAX2.0% MAX.8.3% MAX48" MIN.TURNING SPACE
48" MIN.TURNING SPACE
TOP LANDING AT LEAST ASWIDE AS RAMP WIDTHNOTES:1. CURB RAMPS MAY BE PERPENDICULAR, PARALLEL, OR A COMBINATION OF PERPENDICULAR AND PARALLEL.2. CURB RAMPS (AND FLARED SIDES) MAY NOT PROJECT INTO VEHICULAR TRAFFIC LANES, PARKING SPACES, ORPARKING ACCESS AISLES. CURB RAMPS MARKED AT CROSSINGS MUST BE WHOLLY CONTAINED WITHIN MARKINGS(EXCLUDING FLARED SIDES).3. CURB RAMPS MUST BE 48" MINIMUM WIDE EXCLUDING ANY FLARED SIDES.4. GRADE BREAKS AT THE TOP AND BOTTOM OF CURB RAMPS MUST BE PERPENDICULAR TO THE RAMP AND FLUSH.SUCH GRADE BREAKS ARE PROHIBITED ON THE RAMP SURFACE.5. DETECTABLE WARNINGS MUST EXTEND THE FULL WIDTH OF THE CURB RAMP (FOR PERPENDICULAR CURBRAMPS) OR TURNING SPACE (FOR PARALLEL CURB RAMPS) TO WITHIN 2" ON EITHER SIDE.6. FOR PARALLEL CURB RAMPS, A MINIMUM OF 36" OF THE REQUIRED TURNING SPACE MUST BE PROVIDED BEYONDAND FREE OF ANY DETECTABLE WARNINGS EXCEPT AS FOLLOWS:·IF TECHNICALLY INFEASIBLE TO PROVIDE A 72" WIDE TURNING SPACE THE DEPTH OF DETECTABLEWARNINGS MAY BE REDUCED TO 24" MIN.·EXISTING PARALLEL CURB RAMPS PERMITTED OR INSTALLED PRIOR TO JULY 1, 2021 AND CONFORMINGTO THE APPLICABLE CODE AT THE TIME OF INSTALLATION ARE EXEMPT FROM THIS REQUIREMENT.GUTTER48" MIN. WIDTH 36" MIN.DETECTABLE WARNING TO EXTENDTHE FULL WIDTH OF THE CURB RAMPUP TO WITHIN 2" MAX ON EITHER SIDE48" MIN. WIDTHTOP LANDING AT LEAST ASWIDE AS RAMP WIDTH48" MIN.TOP LANDINGGUTTERDETECTABLE WARNING TO EXTENDTHE FULL WIDTH OF THE CURB RAMPUP TO WITHIN 2" MAX ON EITHER SIDE6" MIN. TO 8" MAX. 18-
18-

2.0% MAX.2.0% MAX6" MIN. TO 8" MAX.36" MIN.CURB WIDTH24" MIN. IN CASE OF TECHNICAL INFEASIBILITYEXISTING CONFORMING CURB RAMPS EXEMPT

SITE PLAN AND ACCESSIBLEPATH OF TRAVELAS NOTED
LEGENDSITE PLAN AND PATH OF TRAVEL1SCALE:1/32" = 1'-0"EGRESS COMMON PATH OF TRAVELEGRESS PATH OF TRAVELACCESSIBLE COMMON PATH OF TRAVEL 18SCALENTSDETECTABLE WARNINGS
KEYNOTES1SITE ENTRANCE SIGNAGE. SEE DETAIL 13/A-0.5A.2PARKING SPACE SIGNAGE. SEE DETAIL 19/A-0.5A AND 20/A-0.5A.3PARKING SPACE EMBLEM. SEE DETAIL 12/A-0.5A.

FOR REFERENCE ONLY
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 17SCALE1/8" = 1'-0"TYPICAL PARKING STALLS13SCALE

POST-MOUNTED ACCESSIBLE PARKING SIGN
1-1/2" = 1'-0"ENTRY SIGNAGE
15SCALE

ACCESSIBLE PARKING SIGNS
NTSCURB RAMPS19SCALE3/4" = 1'-0"
12 20SCALE1-1/2" = 1'-0"8 16SCALE1-1/2" = 1'-0"CONCRETE WHEEL STOPSCALEA-0.5A1'-0 = 1'-0"PARKING SPACE EMBLEMSCALEACCESSIBLE BUILDING ENTRANCE SIGNAGE.1 = 1'-0"'NO PARKING' PAVEMENT MARKING4DETECTABLE WARNING. SEE DETAIL 18/A-0.5A.5

SCOPE OF WORK
17_
N
324455
1 1
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
201
(E) SFEC97'-8"60'-5"74'-8"38'-0"48'-3"100'-10"80'-7"41'-0"33'-6"15'-0"82'-11"LEGENDAREA NOT IN CONTRACT (N.I.C.).KEYNOTES1TACTILE EXIT SIGNAGE. SEE DETAIL #123TACTILE EXIT SIGNSTACTILE EXIT ROUTE SIGNAGE. SEE DETAIL #2TACTILE STAIR LEVEL IDENTIFICATION SIGNAGE. SEE DETAIL #4A-0.5BEXISTING CONSTRUCTION TO REMAIN.NEW CONSTRUCTION, TYPICAL PARTITION UNLESS OTHERWISE NOTED.1.A TACTILE EXIT SIGN WITH THE WORD "EXIT", SHALL IDENTIFY EACH GRADE LEVELEXTERIOR EXIT DOOR.EXITTACTILE EXIT SIGNS SHALL BE REQUIRED AT THE FOLLOWING LOCATIONS:CORRESPONDINGGRADE II BRAILLELINE OF FINISHED FLOOREXITROUTECORRESPONDINGGRADE II BRAILLELINE OF FINISHED FLOOR2.A TACTILE EXIT SIGN WITH THE WORDS "EXIT ROUTE" SHALL IDENTIFY EACH EXIT ACCESS DOOR FROM AN INTERIORROOM OR AREA TO A CORRIDOR OR HALLWAY THAT IS REQUIRED TO HAVE A VISUAL EXIT SIGN.60" MAX.48" MIN.60" MAX.48" MIN.4INTERNATIONAL SYMBOL OF ACCESSIBILITY LOCATED ON 1st FLOOR. SEE DETAIL #5COMMON PATH OF EGRESS< 100 FEET (1006.2.1 CBC)MAXIMUM PATH OF TRAVEL< 300 FEET (1017.2 CBC)ACCESSIBLE PATH OF TRAVELCEILING MOUNTED EXIT SIGN. DARK QUADRANT INDICATES FACE. ARROW(S) INDICATEDIRECTION.5PROVIDE NEW OCCUPANT LOAD SIGNAGE PER SECTION CBC 2022 1004.9 SIGN WALL SHALL BE POSTED INA CONSPICUOUS PLACE NEAR THE MAIN EXIT OR EXIT ACCESS DOORWAY FROM THE ROOM. REFER TOAPPLICABLE ASSEMBLY OCCUPANT LOAD CALCULATION PER EXIT ANALYSIS TABLE ON THIS SHEET.4.A TACTILE SIGN WITH THE FOLLOWING WORDS AS APPROPRIATE: "LEVEL #"**AT EXIT DISCHARGE, SIGN SHALL HAVE RAISED FIVE-POINTED STAR TO LEFT OFIDENTIFYING FLOOR LEVEL. THE OUTSIDE DIAMETER OF STAIR SHALL BE SAME ASTHE HEIGHT OF THE RAISED CHARACTERS. PROVIDE ROOF ACCESS/NO ROOFACCESS AS REQUIRED.STAIR 011LEVEL60"CORRESPONDINGGRADE II BRAILLE1" HIGHLINE OF FINISHED FLOORNOTE: ALL SIGNAGE SHALL COMPLY WITH 2022 CBC 11B-703. REFER TO SHEETA-0.6A AND A-0.6B FOR ADDITIONAL INFORMATIONSYMBOL OF ACCESSIBILITY SIGNAGE5SCALE:NTS12"60"EXIT ANALYSISOCCUPANT CALCULATIONMAXIMUM TOTAL # OF OCCUPANTSTOTAL OCCUPANT SQUARE FOOTAGE# OF EXITS REQUIRED FOR TABLE 1006.3.3# OF EXITS FOR SUITE PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:STAMP AND SIGNATURE:CONSULTANTS:DATEDESCRIPTION DELTADRAWINGS ISSUE08/16/24ISSUE FOR ENGINEERING6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA08/29/24ISSUE FOR PLAN CHECKEXIT ROUTES AND TACTILESIGNAGEAS NOTED18"MIN.12"MIN.5"112""ROOF ACCESS OR NOT"NLOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168LARGECONFERENCE163PEER/MENTALHEALTH WORKERS158SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151STAFFBREAK ROOM147EXITVESTIBULE148GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136MUTI PURPOSEOFFICE132OPEN WORKCOLLABORATION154BLDG.JANITORS149PRIVATE OFFICE167CLUBHOUSE174SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114MOTHER'SROOM108MEN'SRESTROOM109MDF/IDF111GROUP ROOM 04142GROUP ROOM 03140PRIVATE OFFICE116CLIA STOR.117CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159INTERNOFFICE 01153GROUP ROOM 02141CLINICIAN'SOFFICE 13135CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131TESTINGRESTROOM 02112TESTING OFFICE113VESTIBULE107WOMEN'SRESTROOM110HALLWAY106HALLWAY119HALLWAY138HALLWAY150BUILDING STANDARD, SEMI - RECESSED FIRE EXTINGUISHER CABINET.SFECTACTILE EXIT SIGNPERMANENT SIGNAGE TO BE INSTALLED ON THE WALL ADJACENT TO THE LATCH SIDE OF THE DOOR AT +60" A.F.F. MOUNTEDLOCATION MUST ALLOW A PERSON TO APPROACH WITHOUT ENCOUNTERING PROTRUDING OBJECTS OR STANDING WITHIN SWINGPATH OF THE DOOR [11B-307 (PROTRUDING OBJECTS); SEC. 1013.4 AND 11B-703 (TACTILE EXIT SIGNAGE)]LITERARY BRAILLE STANDARD DIMENSIONSDOT DIAMETER - .059"INTER-DOT SPACING - .090"HORIZONTAL SEPARATION BETWEEN CELLS -.241"VERTICAL SEPARATION BETWEEN CELLS -.395"LETTERS & NUMBERS SHALL BE RAISED 1/32",UPPER CASE, SANS SERIF TYPE AND SHALL BEACCOMPANIED WITH GRADE II BRAILLE RAISEDCHARACTERS. SHALL BE AT LEAST 58" HIGH, BUT NOHIGHER THAN 2" CHARACTERS AND BRAILLE SHALLBE IN HORIZONTAL FORMAT AND WITH BRAILLEPLACED 38" MIN AND 12" MAX DIRECTLY BELOW THETACTILE CHARACTERS; FLUSH LEFT OR CENTERED.EXITCORRESPONDINGGRADE II BRAILLEEQEQ48" MIN.NOTES1. SIGNS W/ RAISED CHARACTERS AND BRAILLE SHALL BE LOCATED 48" MINIMUM ABOVE FINISH FLOOR OR GROUND SURFACE, MEASURED FROM THEBASELINE OF THE LOWEST LINE OF BRAILLE & 60" MAXIMUM ABOVE FINISH FLOOR OR GROUND SURFACE, MEASURED FROM THE BASELINE OF THEHIGHEST LINE OF RAISED CHARACTERS. MOUNTING LOCATION SHALL BE BEYOND THE ARC OF THE DOOR SWING BETWEEN THE CLOSED POSITIONAND THE 45 DEGREE OPEN POSITION.2. RAISED CHARACTERS ON SIGNS SHALL BE SELECTED FROM FONTS WHERE THE WIDTH OF THE UPPERCASE LETTER "O" IS 60% MINIMUM AND 110%MAXIMUM OF THE HEIGHT OF THE UPPERCASE "T". STROKE THICKNESS OF THE UPPERCASE "T" SHALL BE 15% MAXIMUM OF THE HEIGHT OF THECHARACTER.60" MAX.EXIT ANALYSIS / COMMON PATH OF EGRESS DISTANCE / MAXIMUM TRAVEL DISTANCE / TACTILE EXIT SIGN LOCATIONS3SCALE:1/8"=1'-0" 5'-0"48" MIN.18"MIN.5'-0"48" MIN.5'-0"48" MIN.5'-0"48" MIN.5'-0"48" MIN.5'-11"48" MIN.5'-0"48" MIN.5'-0"48" MIN.6'-9"48" MIN.1'-7"18"MIN.18"MIN.11111222USESQUARE FOOTAGELOAD FACTOROCCUPANTS LOADUSESQUARE FOOTAGELOAD FACTOROCCUPANTS LOADLOBBY #1006561504SECURITY #102(OFFICE)541505RECEPTION #101(OFFICE)8201501VESTIBULE #10790--MOTHER'S ROOM #108851501MEN'S RESTROOM #109252--WOMEN'S RESTROOM #110292--MDF/IDF #111963001TESTING RESTROOM 02 #11273--TESTING OFFICE #1131411501TESTING RESTROOM 01 #11473--PRIVATE OFFICE #1441881501PRIVATE OFFICE #116891501CLIA STOR. #117891501COPY ROOM #1181203001MULTI PURPOSE OFFICE #1324421503LAUNDRY #133(JANITOR'S CLOSET)613001RESTROOM #13458--GROUP ROOM 01 #139(CLASSROOM)2591518GROUP ROOM 03 #140(CLASSROOM)2591518GROUP ROOM 02 #141(CLASSROOM)2591518GROUP ROOM 04 #142(CLASSROOM)2591518CONFERENCE ROOM #1433741525CHART/SUPPLY/STORAGE #1463723001STAFF BREAK ROOM #1476921546EXIT VESTIBULE #148199--BLDG. JANITORS #14954--SUPPLY/STORAGE/CHART #1513323001OPEN WORK COLLABORATION #154(OFFICE)3601502PEER/MENTAL HEALTH WORKERS #158(OFFICE)6891505LARGE CONFERENCE #1637261549GROUP ROOM 02 #171(CLASSROOM)1891513PRIVATE OFFICES4,35315029USESQUARE FOOTAGELOAD FACTOROCCUPANTS LOADGROUP ROOM 01 #172(CLASSROOM)2241515CLUBHOUSE #174(BREAKROOM)3791526HALLWAYS (CIRCULATION)4,299--30818,0962525'-0"48" MIN.LAUNDRY133OPEN COLLAB.138AWATER HEATER CLOSET132AWATER HEATER CLOSET #132A(JANITOR'S CLOSET)253001CLIENTRESTROOM173PRIVATE OFFICE144CHART/SUPPLY/STORAGE146CONFERENCE ROOM143STORAGE #115753001 CLIENT RESTROOM #17388-- 12"MIN.18"MIN.218"MIN.36'-0"52'-6"5112" MIN.218" MIN.12"MIN.5'-0"48" MIN.12"MIN.118"MIN.18"MIN.6'-0"48" MIN.18"MIN.18"MIN.12"MIN.1 NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
202
(a)BOTTOMLANDINGRAMP RUNLANDING72" MIN.60" MIN.
(b)RAMP RUNLANDING60" MIN.RAMP RUN72" MIN.AS LEAST AS WIDEAS RAMP RUNTOPLANDING60" MIN.60" MIN.(c)DOWNDOWN (a) EXTENDED SURFACE12"MIN.12"MIN.
(a) CURB OR BARRIERX<4
(a) HANDRAIL CLEARANCE1 1/2" MIN.(b) CIRCULAR1 1/4"-2"(C) NON-CIRCULARDIAGONAL @ 2 1/4" MAX.4"-6 1/4" PERIMETER34"-38"(a) HANDRAIL DIMENSIONS AT RAMPS (b) HANDRAIL DIMENSIONS @ BOTTOM OF STAIRS
34"-38"(c) HANDRAIL DIMENSIONS @ TOP OF STAIRS12" MIN.X34"- 38"X12" MIN.12" MIN.12" MIN. 48" MIN.30" MIN.48" MIN.30" MIN.3.5" MIN.15" MIN.5" MAX.(a) ACCESSIBLE WATER CLOSETS (b) AMBULATORY ACCESSIBLEWATER CLOSETS
17"-18"
17"-19"56" MIN.60" MIN.OTHER FIXTURESNOT ALLOWEDWITHIN THIS AREA4'-0"MIN.60" MIN.WHEELCHAIR ACCESSIBLE TOILET COMPARTMENT (c) PLAN6" MIN.9" MIN.6" MIN.PARTITION(a) ELEVATION ADULT12" MIN.6" MIN.PARTITION(b) ELEVATION CHILDREN

WHEELCHAIR ACCESSIBLE COMPARTMENT TOE CLEARANCE
60" MIN.59" MIN. @ FLOOR MOUNTED W/C56" MIN. @ WALL HUNG W/C/ 4" MAX.ALTERNATE DOORLOCATION4" MAX.4'-0"MIN.48" MIN.60" MIN. FOR SIDE OPENING 44" MIN.35"-37"60" MIN.17"-19"
X>80"4" MAX.X>27"(a)12" MAX.>27"-80"12" MAX.(b)4" MAX4" MAX27" MAXx>12x>305 4" MAX.4" MAX.X>12X>30580" MAXLIMITS OF PROTRUDING OBJECTSPOST-MOUNTED PROTRUDING OBJECTS 27" MAX.X<80"
15" MIN.48" MAX.15" MIN..48" MAX.10" MAX.UNOBSTRUCTED FORWARD REACH

UNOBSTRUCTED SIDE REACH
10"-24"34" MAX.46" MAX.34" MAX.48" MAX.10" MAX.(a)(b) 48" MAX.20" MAX.20"-25" MAX44" MAX.(a)(b)OBSTRUCTED HIGH FORWARD REACH OBSTRUCTED HIGH SIDE REACH9" MIN.8" MIN.27" MAX.11" MAX.25"25" MAX.30" MIN.(A)ELEVATION(B)PLAN17"-25"30" MIN. 9"6" MAX.KNEE CLEARANCE(A)ELEVATION(B)PLANTOE CLEARANCE (A)(B)(C)CIRCULARNONCIRCULAR

1.25"-2"2" MAX.4 TO 4.8 PERIMETER1 1/2" MIN.12" MIN.1 1/2" MIN(D)DIAGONAL @ 2" MAX.18"MIN.60" MIN.(a) FRONT APPROACH, PULL SIDE48" MIN.(b) FRONTAPPROACH,PUSH SIDE12"MIN.* IF BOTH CLOSER AND LATCH ARE PROVIDED 36"MIN.60" MIN.(c) HINGE APPROACH, PULL SIDE44" MIN.(d) HINGEAPPROACH,PUSH SIDE12"MIN.* IF BOTH CLOSER AND LATCH ARE PROVIDED** 48 MIN. IF BOTH CLOSED AND LATCHED PROVIDED22"MIN. 24"MIN.48" MIN.(e) LATCH APPROACH, PULL SIDE*54 MIN IF CLOSER IS PROVIDED (f) LATCHAPPROACH,PUSH SIDE24"MIN.*48 MIN IF CLOSER IS PROVIDED42" MIN. (a)60" MIN.60" MIN.
(b)60" MIN.DOOR WIDTH48"DOOR WIDTH
(c)60" MIN.DOOR WIDTH48 MIN.
18"MIN.(a) PULL SIDE
X>8"
60" MIN.
(b) PUSH SIDEX>8"48" MIN.
(a) PUSH SIDE ,DOOR PROVIDEDWITH BOTH CLOSERAND LATCHX>8"48" MIN.12"MIN.BACK WALLSIDE WALLSIDE WALL30" MIN.SIDE WALL36" MIN.60" MIN.NOTE: INSIDE FINISHED DIMENSIONS MEASURED AT THECENTER POINTS OF OPPOSING SIDESSIDE WALLSIDE WALL36" MIN.BACK WALLFRONT WALL60" MIN.36" MIN.NOTE: INSIDE FINISHED DIMENSIONS MEASURED AT THECENTER POINTS OF OPPOSING SIDES 3/16" = 1'-0"RAMP LANDINGS 3/8" = 1'-0"RAMP EDGE PROTECTION
HANDRAIL CROSS SECTIONHANDRAIL DIMS. @ RAMPS & STAIRSDRINKING FOUNTAINWATER CLOSET LOCATION CLEARANCE FOR WATER CLOSETAMBULATORY COMPARTREDUCED VERTICAL CLEARANCEA-0.6A

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 3/8" = 1'-0"4DOOR CLEARANCESTWO DOORS IN SERIESCLEARANCES @ SWING DOORS CLEARANCES @ REC. DOORS
3/8" = 1'-0"8ACCESSIBLE RESTROOM CLEARANCESACCESSIBLE TOILET 1 1/2" = 1'-0"5SIZE AND SPACING OF GRAB BARS
12STAIRWELL CLEARANCES
10RAMP CLEARANCES
3/8" = 1'-0"
1 1/2" = 1'-0"
3/8" = 1'-0"
13PROTRUDING OBJECTS 3/8" = 1'-0"
14OBSTRUCTED REACH 3/8" = 1'-0"
15UNOBSTRUCTED REACH 3/8" = 1'-0"
16TOE CLEARANCE 3/8" = 1'-0"

SHOWER COMPARTMENTS

BASE BUILDINGACCESSIBILITY
60" MIN.
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
203
A-0.6B

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA TO CENTERLINEPARTITION PLAN DIAGRAMSIDE ELEVATIONPLAN VIEWNOTES: FOR DOORS SERVING OTHER THAN A REQUIRED EXIT STAIRWAYPULL SIDEPUSH SIDE PLAN DIAGRAM PLANPLAN DIAGRAMWALLRIMURINAL SIDE ELEVATIONTOILET FRONT ELEVATIONTOILET SIDE ELEVATIONHIGH FORWARD REACHACCESSIBLE PATH OF TRAVEL'X' < 48"MINIMUM CLEARANCES FOR SEATING AND TABLESCLOSETSSHELVESMINIMUM MANEUVERING CLEARANCES IN ALCOVESMAXIMUM FORWARD REACH OVER AN OBSTRUCTIONELEVATION(a) PULL SIDE (INTERIOR DOOR)(b) SLIDING DOOR(c) FOLDING DOORPUSH SIDE

PUSH SIDE

PULL SIDE
SIDE ELEVATIONPLAN VIEWSECTION AT PARTITIONBOTH DOORS OPEN OUTDOORS AT OPPOSITE WALLSDOORS AT ADJACENT WALLSDOOR IN SERIESLINE OF REQUIRED CLEARANCE19"MIN.28"-34" MAX27" MIN.9" MIN.11"MIN.

DINING AND/OR WORK SURFACELINE OF REQUIRED CLEARANCEDINING AND/OR WORK SURFACECLEAR FLOOR SPACECL30"MIN.19"MIN.48" MIN.24" MIN.44" MIN. CLR. 35" - 37"17"-18"42" MIN. GRAB BAR12"MAX.54" MIN.60" MIN. CLRCL1 1/2" CLR. TYPICAL6" MIN.9"MIN. CLR.NOTE:WHERE SIX OR MORE TOILET COMPARTMENTS ARE PROVIDED OR WHERE A COMBINATION OF URINALS ANDWATER CLOSETS TOTALS SIX OR MORE FIXTURES, AT LEAST ONE COMPARTMENT SHALL COMPLY WITHSECTION 11B-604.8.2 AMBULATORY ACCESSIBLE COMPARTMENTS. 8" MIN. KNEE CLR.9" MIN.27" MIN.29" MIN.34" MAX.11" MIN.6" MAX.17" MIN.DEPTH 1'-6" MIN.TOCENTERLINE1'-5" MIN.19"MAX.48" MIN.30" MIN.CLEAR FLOOR SPACEINSULATE HOT WATER PIPESAND DRAIN TO PROTECTAGAINST CONTACT. 48" MIN.
18"MIN.12"MIN.48" MIN.
48" MIN.12" MIN.12" MIN.48" MIN.18" MIN.18" MIN.PROVIDE THIS ADDITIONALSPACE IF DOOR IS EQUIPPEDWITH BOTH A LATCH AND ACLOSER 34"MIN. CLEAR18" MIN.24" MIN.17"-18"60" MIN.56" MIN. ATWALL-MOUNTED W.C. WHENDOOR SWINGS IN54" MIN.59" MIN. ATFLOOR-MOUNTED W.C. WHENDOOR SWINGS IN 60" MIN. CLEAR32" MIN.CLEAR48" MIN. CLEAR
CL
60" MIN.DIA. CLEAR30" x 48"CLEAR SPACE
A USEABLE SHELF 44" MAX.3'-4" MAX. TO ALLOPERABLE PARTSAND COIN SLOTS3'-4" MAX. TO ALLOPERABLE PARTS3'-4" MAX.48" MAX. TOTOP OF HOOK 48" MAX.TO TOP15" MIN.TO BOTTOM3'-6" (HORIZ.) ATCOUNTERTOPS48" MAX. TOP15" MIN. TO BOTTOM4'-0" MAX. TO TOP . MEDICINE CABINETSANITARY NAPKINVENDORCOMBINATION WASTE/TOWELUNITSTOWEL BARCLOTHES HOOKBOTTOM EDGE OF REFLECTIVE SURFACE 40" MAX. ABOVEACCESSIBLE LAVATORY/COUNTER TOP. 35" AT ALL OTHERLOCATIONS EXCEPT FITTING/DRESSING ROOMS WHERE20" MAX AFF./18" MIN. WIDE/54" MIN. HEIGHT. FULLLENGTH TOP EDGE SHALL BE 78" AFF.NOTE: MOUNTING HEIGHT FROM FINISHED FLOOR, TYPICAL. PROVIDE CLEAR SPACE FOR FORWARD APPROACH 30" x 48"ACCESSIBLE STALL DOOR HARDWARE: THE DOOR SHALL BE SELF-CLOSING.A DOOR PULL SHALL BE PLACED ON BOTH SIDES OF THE DOOR NEAR THELATCH. DOORS SHALL NOT SWING INTO THE CLEAR FLOOR SPACE ORCLEARANCE REQUIRED FOR ANY FIXTURE.NOTE: TOILET ROOM FLOORS SHALLHAVE A STABLE, FIRM, SLIP RESISTANTSURFACE.OUTLETSSWITCHES/CONTROLSALONG ACCESSIBLE ROUTEMIRROR 48" MIN.
48" MIN.36" MIN.60" MIN.48" MIN.22" MIN.54" MIN.
42" MIN.22"MIN.
54" MIN.42" MIN.24" MIN.42" MIN.24" MIN.42" MIN.60" MIN.44" MIN.24" MIN.24" MIN.54" MIN.(F) LATCH SIDE APPROACHSLIDING DOORS(H) LATCH SIDE APPROACHFOLDING DOORSLATCH APPROACHNOTE: ALL DOORS IN ALCOVES SHALL COMPLY WITH THE CLEARANCES FOR FRONT APPROACHES 48"MIN. IF DOOR HAS BOTH A LATCH AND A CLOSER 54" MIN. IF DOOR HAS BOTH A LATCH AND A CLOSER(H) SLIDE SIDE APPROACHFOLDING DOORS(E) SLIDE SIDE APPROACHSLIDING/FOLDING DOORSHINGE APPROACH(G) FRONT APPROACH FOLDINGDOORS(D) FRONT APPROACH SLIDINGDOORS 3'-0" MIN.30" MIN.5'-0" MIN.15"-16"3"FROM ENTRY14"-15"33"-36"TO TOP OF GRIP, TYP. 22"-23"2 1/2" MAX.1 1/2" MAX.
17"-19"39"-41" TO CL40" MAX.19" MIN.27" MAX.48" MAX TO TOPOF MOUNTING BRACKET CONTROL AREASOAP DISH WITHINREACH LIMITS OFSEATSINGLE LEVERCONTROL VALVEHAND HELD SPRAYER. UNIT TO HAVE ON/OFF CONTROLWITH NON-POSITIVE SHUT-OFF. CBC 11B-608.6. UNIT TODELIVER WATER THAT IS 120 DEGREES FAHRENHEIT MAX.CBC 11B-608.6FOLDING SHOWER SEAT MAX. 6"FROM WALL WHEN FOLDEDNOTE: WHERE DRAINS ARE PROVIDED, GRATE OPENINGSARE MAX. 1/4" AND FLUSH WITH FLOOR1/2" BEVELED LIP MAX.SLOPE MAX.1/4" / FT.59" MIN. HOSE 18" MIN.32" MIN. CLR.12"MAX.48" MIN. CLR.24" MIN.1 1/2" 17" MIN.18" MIN.60" MIN.17"-18"OF FIXTURE12"MAX.42" MIN.54" MIN.56" MIN. DEEP WALL HUNG TOILETS59" MIN. DEEP FOR FLOOR MOUNTED TOILETS NOTE: TOILET ROOM FLOORS SHALL HAVE A STABLE,FIRM, SLIP RESISTANT SURFACE. PROVIDE A PRIVACYLATCH TO ENTRY DOOR.FLUSHACTIVATORWIDE SIDE NO DOOR SHALL ENCROACH INTO 60" MIN. DIA.CLEAR SPACE MORE THAN 12" BUT SHALL NOTENCROACH INTO THE CLEAR FLOOR SPACE OF AFIXTURE CLCLCLOFFIXTURE60" MIN.DIA. CLEAR30"x48" CLEARFLOOR SPACE32" MIN.32" MIN.48" MIN.60" MIN.32" MIN. CLR.FROM DOORTO STOP18" MIN. CLEAR@ INT. DOORS24" MIN. CLEAR@ EXT. DOOR90°12" X>8"18"MIN.60" MIN.

NOTE: 2% MAX SLOPE AT EXTERIORLANDINGS ONLYLEVER OR U-SHAPED HANDLE 34"MIN. TO 44" MAX. A.F.FCLEAR LEVEL LANDINGPROVIDE 12" MIN. IF DOOR ISEQUIPPED WITH BOTH A LATCHAND A CLOSERCLEAR LEVELLANDINGCLEAR LEVELLANDINGNOTE: PROVIDE BUMPER IN POCKET TOPREVENT DOOR FROM FULLY RECEDING Y"1'-4"EQ.EQ.X48" MIN.15" MIN.18" MIN.19" MAX.4" MAX.48" MIN.EQ.EQ.XY 4" MAX.15" MIN.18" MIN.19" MAX.9" MIN.27" MIN. CLR.36" MAX @ SPOUT OUTLET8" MIN. KNEE CLR.6" MAX.11" MIN.17" MIN. CLR.1.ALL DRINKING FOUNTAINS SHALL BE CONTAINED WITHIN ALCOVES ORCOMPLETELY BETWEEN WING WALLS SO AS TO NOT ENCROACH INTOTHE PEDESTRIAN WAYS. WING WALLS SHALL PROJECT FROM THE WALLAND REST ON THE FLOOR OR FLOAT NO MORE THAN 6" AFF.2.THE SPOUT SHALL PROVIDE A FLOW OF WATER 4" HIGH MIN. ANDSHALL BE LOCATED 4" MAX. FROM THE FRONT OF THE UNIT. THE ANGLEOF THE WATER STREAM SHALL BE MEASURED HORZ. RELATIVE TO THEFRONT FACE OF THE UNIT. WHERE SPOUTS ARE LOCATED LESS THAN 3"OF THE FRONT OF THE UNIT, THE ANGLE OF THE WATER STREAM SHALLBE 30 DEGREES MAX. WHERE SPOUTS ARE LOCATED 3"-5" MAX FROMTHE FRONT OF THE UNIT, THE ANGLE OF THE WATER STREAM SHALL BE15 DEGREES MAX.3.SPOUT OUTLETS FOR STANDING PERSONS SHALL BE 38" MIN AND 43"MAX. ABOVE THE FINISH FLOOR.PLAN NOTE: X= 18" MIN. ALCOVE DEPTH THEN Y=30" MIN. CLR. IFALCOVE DEPTH (X) IS GREATER THAN 24", THEN ALCOVE WIDTH (Y)MUST BE A MINIMUM OF 36" CLEARPLAN OF "HIGH-LOW"DRINKING FOUNTAINPLAN OF "HIGH-LOW"DRINKING FOUNTAINSECTION OF LOW DRINKINGFOUNTAIN "LOW" FOUNTAIN"HIGH" FOUNTAIN
1 1/2"CLR.12" MIN. CLR.1 1/4" - 2"NOMINAL1 1/2" CLR.44" MAX TOFLUSH CONTROL6' MAX.13 1/2" MIN.17" MAX.48" MIN.EQ.EQ.30" MIN.36" MIN. GRAB BAR24"MIN.12"MIN.33" - 36" TO TOPOF GRIPPING SURFACE17"-18"40" MAX ALLDISPENSERS TOHIGHEST OPERABLEPART19" MINTO OUTLET24" MIN.7"-9"4'-6"3'-6" MIN. GRAB BAR1'-0"MAX.33"-36" TO TOPOF GRIPPING SURFACE17"-19" NOTE: GRAB BARSTRUCTURAL STRENGTHSHALL COMPLY W/ CBC11B-609.8. GRAB BARSSHALL NOT ROTATE WITHINTHEIR FITTINGS AND SHALLHAVE ROUNDED EDGES.TYPICAL GRAB BAR SECTIONURINAL PLAN VIEWCLEAR FLOORSPACEFLUSHACTIVATORWIDE SIDE 36" MIN.X>24"X>15"60" MIN.24" MAX.30"46" MAX.34" MAX.48" MAX.21"MAX.21"MAX.40" MIN.48" MAX.10" MAX.30"34" MIN.15" MIN. 48"30"MIN.10" MAX.48" MIN.15"MIN.48" MAX.
30" MIN.42" MIN.48" MIN.
30"MIN.19"MIN.30"MIN.48" MIN.19" MIN.30"MIN.
48" MAX.27" MIN.CLR.20"MAX.34" MAX.48" MIN.44" MAX.27" MIN.CLR.48" MIN.34" MAX.>20"-25"MAX.

NOTE: AT PASS THROUGH KITCHENS,A MIN. 40 INCH CLEAR PATH. AT 'U'SHAPED OR DEAD-END KITCHENS, 60INCH MIN CLEAR. REACH DIAGRAMSAPPLY TO EQUIPMENT ANDREF/FREEZERCLEAR FLOOR SPACEPARALLEL APPROACHHIGH AND LOW SIDEREACH LIMITSMAX. SIDE REACH OVER ANOBSTRUCTION 44" MIN**36" MIN*60" MIN. CLR.60" MIN. CLR.24" MIN.CLR.12" MIN.CLR.36" MIN*44" MIN**12" MINCLR.60" MIN.60" MIN.32"MIN.36" MIN*24"MAX.48" MIN.24"MAX.32"MIN. 44" MIN**36" MIN*48" MIN.36" MIN*44" MIN**.36" MIN*44" MIN**42" MIN*44" MIN**.42" MIN*44" MIN**48" MIN. 60" MIN.36" MIN*.36" MIN*60" DIA.NOTE:* CORRIDORS WITH OCCUPANCY OF 9 OR LESS** CORRIDORS WITH OCCUPANCY OF 10 OR MORE ALSO REFER TO OCCUPANT LOAD FORREQUIRED EGRESS WIDTH.

MINIMUM CLEAR WIDTH FORSINGLE WHEELCHAIRCLEAR WIDTH FOR TWO WHEELCHAIRS TO PASS PARALLEL THROUGHCORRIDORT-SHAPE 180° TURNS WHEELCHAIR TURNING SPACE180° TURNS AROUND AN OBSTRUCTIONN.T.S16ACCESSIBLE DRINKING FOUNTAINN.T.S12ACCESSIBLE TOILET, URINAL, AND GRAB BARN.T.S4ACCESSIBLE CORRIDORS AND TURNINGN.T.S8ACCESSIBLE MINIMUM REACH48" MAX.

N.T.S15ACCESSIBLE ROLL-IN SHOWERN.T.S11ACCESSIBLE SINGLE-ACCOMMODATION TOILETN.T.S3ACCESSIBLE DOOR CLEARANCES-FRONT APPROACH N.T.S14ACCESSIBLE MULTI-ACCOMMODATION TOILETN.T.S6ACCESSIBLE DOOR CLEARANCES-SIDE APPROACHN.T.S10ACCESSIBLE ACCESSORIES N.T.S13ACCESSIBLE CLEARANCES @ DINING/WORK SURFACESN.T.S9ACCESSIBLE AMBULATORY COMPARTMENTN.T.S1ACCESSIBLE VESTIBULESN.T.S5ACCESSIBLE LAVATORY

BASE BUILDINGACCESSIBILITY
39"-41"18"
THE BOTTOM 10" OF ALL DOORSEXCEPT QUTOMATIC ANDSLIDING SHALL HAVE A SMOOTH,UNINTERRUPTED SURFACE. [CBC11B-404.2.10] 12"12"12"12"
60" MAX. A.F.F. TO BASELINE OFHIGHEST RAISED CHARACTER48" MIN. A.F.F. TO BASELINE OFLOWEST RAISED CHARACTERWALL MOUNTED SIGNAGEDOOR MOUNTED SIGNAGE1/8" RADIUSCORNERMENS RESTROOMNOTE:1.SIGNS SHALL HAVE NO SHARP EDGES, CORNERS WITH 1/8" MIN. RADIUS. 1/4" MIN. HIGH2.RAISED LETTERING 1/32" RAISED FROM SURFACE, UPPERCASE SANS-SERIF TYPE, NOT ITALIC, OBLIQUE,SCRIPT, HIGHLY DECORATIVE OR OTHER UNUSUAL FORMS. CHARACTERS SHALL BE OF FONTS WHERETHE WIDTH OF THE UPPERCASE LETTER 'O' IS 60% MIN. AND 110% MAX. HEIGHT OF THE UPPERCASELETTER "I". CHARACTER HEIGHT MEASURED VERTICALLY FROM THE BASELINE SHALL BE 5/8" MIN. AND2" MAX. BASED ON LETTER "I". LETTER "I" STROKE THICKNESS SHALL BE 15% MAX. HEIGHT OF THECHARACTER. CHARACTER SPACING, RECTANGULAR, SHALL BE 1/8" MIN. AND 4 TIMES CHARACTERSTROKE WIDTH MAX. CHARACTER SPACING FOR OTHER THAN SQUARE, 1/16" MIN. AND 4 TIMESCHARACTER STROKE WIDTH, BUT SHALL MEET RECTANGULAR SPACING. CHARACTERS SHALL BE SPACEDFROM RAISED BORDERS 3/8" MIN.3.RAISED BRAILLE, GRADE 2, MARKING PER 2022 CBC SECTION 11B-703. WOMENS RESTROOMALL-GENDER RESTROOM60" A.F.F.60" A.F.F.60" A.F.F.

N.T.S7ACCESSIBLE RESTROOM SIGNAGE

ALL GENDERRESTROOMRESTROOMUNISEXRESTROOM
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
204

ELEVATION AELEVATION BELEVATION CELEVATION D
2'-10"CEILING HEIGHT V.I.F.6'-6"3'-4" MAX.1'-6"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX.

CEILING HEIGHT V.I.F.
33"-36"TOP OF GRAB BAR12"MAX.42" MIN.54" MIN.6'-6"17" TO 19"MAX.

CEILING HEIGHT V.I.F.

CEILING HEIGHT V.I.F.6'-6"2'-10"POCKETDOOR

ELEVATION AELEVATION BELEVATION CELEVATION D
9'-0"CEILING HEIGHT
33"-36"TOP OF GRAB BAR12"MAX.42" MIN.54" MIN.17" TO 19"MAX. 9'-0"CEILING HEIGHT
34"
9'-0"CEILING HEIGHTOPEN TOBEYOND34"4"9'-0"CEILING HEIGHT1'-6"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX. 9"
6'-6"
6'-6"
ELEVATION AELEVATION BELEVATION CELEVATION D12"MAX.42" MIN.33"-36"TOP OF GRAB BAR54" MIN.17" TO 19"MAX. 9'-0"CEILING HEIGHT
9'-0"CEILING HEIGHT
17"MAX.1'-0"4'-0"1'-6"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX.1'-0"6'-0"OPEN TOBEYOND34"4"9'-0"CEILING HEIGHT 34"
9'-0"CEILING HEIGHT9"
6'-6"6'-6"
6'-6"
ELEVATION AELEVATION BELEVATION CELEVATION D1'-6"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX.2'-10"CEILING HEIGHT V.I.F.3'-4" MAX. 6'-6"
2'-10"6'-6"
CEILING HEIGHT V.I.F.POCKETDOOR
CEILING HEIGHT V.I.F.12"MAX.42" MIN.33"-36"TOP OF GRAB BAR54" MIN.17" TO 19"MAX.

CEILING HEIGHT V.I.F.6'-6"
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA RESTROOM ELEVATIONSA-0.7A

AS NOTED
1AACCESSIBLE FLOOR MOUNTED WATER CLOSET:MANUF.: AMERICAN STANDARDNAME: MADERA FLOWISE 16-1/2" HEIGHT ELONGATED LESS EVER CLEANNUMBER: 3043.001/3248.001 ELONGATED BOWL ONLY TOP SPUDFINISH: WHITEMOUNTING HEIGHT: MOUNT ALL TOILETS AT ACCESSIBLE HEIGHTTOILET FLUSH VALVE:MANUF.: KOHLERNAME: TRIPOINT-TOUCHLESS DC 1.28 GPF TOILET FLUSHOMETERNUMBER: K-10956-SVFINISH: POLISHED CHROMENOTE #1:PROVIDE 1-1/2" CLEAR BETWEEN TOP OF FLUSHOMETER AND BOTTOM OF ADA GRAB BAR.NOTE #2:PROVIDE POWER FOR DC POWER PER MANUFACTURER SPECS.TOILET SEAT:MANUF.:AMERICAN STANDARDNAME:COMMERCIAL HEAVY DUTY OPEN FRONT LESS COVERNUMBER:5901.100FINISH:WHITENOTE:REFER TO SHEET 12/A-0.6B FOR SEAT HEIGHT. 7RECESSED MOUNTED TOILET SEAT-COVER DISPENSER, SANITARY NAPKIN DISPOSAL, ANDTOILET TISSUE DISPENSER (WOMEN'S):MANUF.: BOBRICK CLASSIC SERIESNUMBER: B-3092 OR B-3091FINISH:STAINLESS STEEL SATINR.O.:16" WIDE X 29-1/4" HIGH X 4" DEPTH 3 RESTROOM EQUIPMENT SCHEDULE
8A1-1/2" DIA. STAINLESS STEEL 42" LONG GRAB BAR WITH SNAP FLANGE:MANUF.:BOBRICKNUMBER:B-6806X42FINISH: SATINNOTE:PROVIDE WALL BACKING AS REQUIRED TO RESIST 250 LB. LOAD.81-1/2" DIA. STAINLESS STEEL 36" LONG GRAB BAR WITH SNAP FLANGE:MANUF.: BOBRICKNUMBER:B6806X36FINISH:SATINNOTE:PROVIDE WALL BACKING AS REQUIRED TO RESIST 250 LB. LOAD. 10RECESSED AUTOMATIC PAPER TOWEL DISPENSER/WASTE RECEPTACLE:MANUF.:BOBRICKNUMBER:B-3974FINISH:STAINLESS STEEL-SATINR.O.:17-3/16" WIDE x 56" HIGH x 9-1/16" MIN. DEPTHNOTE #1:GENERAL CONTRACTOR TO COORDINATE WITH ELEVATION FOR INSTALLATIONPLACEMENT. RE-FRAME WALL AS REQUIRED.NOTE #2:PROVIDE AC ADAPTER PART #3974-57NOTE #3:WHEN INSTALLING NEXT TO COVE BASE, PROVIDE MITERED COVE BASE 45 DEGREESTO ACCOMMODATE FLANGE.

ACCESSIBLE WALL HUNG LAVATORY:MANUF.:AMERICAN STANDARDNAME:WALL HUNG LAVATORY WITH EVERCLEAN DECORUMNUMBER: 9024.011EC CHO WITH RIGHT HAND SOAP DISPENSERFINISH:WHITENOTE:PROVIDE INSULATION AT EXPOSED PIPES BELOW.FAUCET FOR WALL HUNG LAVATORY:MANUF.: AMERICAN STANDARDNAME:SELECTRONIC PROXIMITY LAVATORY FAUCETNUMBER:605B.105FINISH:CHROME FINISHNOTE:PROVIDE MULTI AC POWER KIT 12ELECTRIC SOAP DISPENSER FOR WALL HUNG LAVATORY:MANUF.:BOBRICKMODEL:AUTOMATIC LAVATORY MOUNTED SOAP DISPENSERNUMBER: B-826.18FINISH:CHROME FINISHNOTE:PROVIDE AC ADAPTOR 826.2015NEW DOOR MOUNTED ACCESSIBLE SIGNAGE FOR ALL GENDER RESTROOMNUMBER:SBH12WSIZE:12" CIRCLECOLOR:WHITE 20NEW WALL MOUNTED ACCESSIBLE SIGNAGE FOR ALL GENDER RESTROOMNUMBER:SB443SIZE:8"X8"COLOR:WHITE21STEEL KICK PLATE:SIZE:10" HIGH X 36"FINISH:BRUSHED STAINLESS STEELNOTE: PROVIDE ON INSIDE RESTROOM DOOR.22ROUND DRAIN COVER:FINISH:STAINLESS STEEL BRUSHED FINISHNOTE:SEE PLUMBING DRAWINGS.234VANITY MIRROR:BOBRICKMANUF.:SIZE:NUMBER:24"L X 36"HB-290WELDED-FRAME MIRRORNAME:BABY CHANGING TABLE:MANUF.:KOALAMODEL:KB300 HORIZONTAL SURFACE-MOUNTEDFINISH:BEIGE 00NOTE: PROVIDE BACKING IN WALL PER MANUFACTURER SPECS 18NEW WALL MOUNTED ACCESSIBLE SIGNAGE FOR MEN'S RESTROOMNUMBER:SBH12WSIZE:6"X8"COLOR:WHITE19NEW WALL MOUNTED ACCESSIBLE SIGNAGE FOR WOMEN'S RESTROOMNUMBER:SB443SIZE:6"X8"COLOR:WHITE 2WALL MOUNTED ADA COMPLIANT URINAL:MANUF.: AMERICAN STANDARDNAME: WASHBROOK FLOWISE 0.125 GPF ULTRA HIGH EFFICIENCY URINALNUMBER: 6590.125, TOP SPUD, 3/4" OUTLETFINISH: WHITENOTE: ULTRA HIGH EFFICIENCY (0.125 GPF/ 0.5 LPF)FLUSH VALVE: "AMERICAN STANDARD SELECTRONIC" URINAL FLUSH VALVE, #6063.013.002, DC POWER (TOP SPUD) POLISHED CHROME.2AWALL MOUNTED URINAL:MANUF.: AMERICAN STANDARDNAME: WASHBROOK FLOWISE 0.125 GPF ULTRA HIGH EFFICIENCY URINALNUMBER: 6590.125, TOP SPUD, 3/4" OUTLETFINISH: WHITENOTE: ULTRA HIGH EFFICIENCY (0.125 GPF/ 0.5 LPF)FLUSH VALVE: "AMERICAN STANDARD SELECTRONIC" URINAL FLUSH VALVE, #6063.013.002, DC POWER (TOP SPUD) POLISHED CHROMENOTE 1:INSTALL URINAL AT STANDARD HEIGHT AT ALLNON-ADA COMPLIANT WATER CLOSET LOCATIONS13FLOOR MOUNTED TOILET PARTITIONS::MANUF.: METPAR CO.MODEL: THE LUXOR METPAR TYPE: FT-700 FLOOR MOUNTEDMATERIAL: POWDER COAT FINISHFINISH: # NICKEL SILVERNOTE: PROVIDE DOOR HOOK BEHIND EACH STALL DOOR 3AADA COMPLIANT SINK:MANUF.: KOHLERNAME: UNDERCOUNTER MOUNTEDNUMBER: K-2211, WITH OVERFLOW, WITH CLAMPS FINISH: WHITESIZE: BASIN AREA: 19" W x 15" L, OVERALL DIM: 21 1/4" W x 17 1/4" LFAUCET: SLOAN OPTIMA SYSTEMS ETF-600 ELECTRONIC HAND WASHING FAUCET, POLISHED CHROME FINISH 14WALL MOUNTED URINAL SCREEN:MANUF.: METPAR CO.MODEL: TYPE "WH" WALL HUNG URINAL SCREENFINISH: STAINLESS STEELSIZE: 18" DEEP x 42" HIGH17NEW DOOR MOUNTED ACCESSIBLE SIGNAGE FOR MEN'S RESTROOMNUMBER:SBH12MSIZE:12" TRIANGLECOLOR:WHITE16NEW DOOR MOUNTED ACCESSIBLE SIGNAGE FOR WOMEN'S RESTROOMNUMBER:SBH12WSIZE:12" CIRCLECOLOR:WHITE 11AUTOMATIC LAVATORY MOUNTED LIQUID SOAP DISPENSER:MANUF.:BOBRICKNUMBER:B-826.18 (BATTERY OPERATEDFINISH:STAINLESS STEEL 4SCALE3/8" = 1'-0"ELEVATIONS AT TESTING RESTROOM 01 #114NOTE:*REFER TO SHEET A-5.0 FOR FINISH SCHEDULE. 3SCALE3/8" = 1'-0"ELEVATIONS AT TESTING RESTROOM 02 #112NOTE:*REFER TO SHEET A-5.0 FOR FINISH SCHEDULE.

WT2SEMI GLOSSP4METALSTRIP TYP.WT2SEMI GLOSSP4SEMI GLOSSP4WT2SEMI GLOSSP4METALSTRIP TYP.

WT2SEMI GLOSSP4METALSTRIP TYP.WT2SEMI GLOSSP4METALSTRIP TYP.SEMI GLOSSP4WT2SEMI GLOSSP4 METALSTRIP TYP.
1SCALE3/8" = 1'-0"ELEVATIONS AT MEN'S RESTROOM #109
2SCALE3/8" = 1'-0"ELEVATIONS AT WOMEN'S RESTROOM #110
WT1
WT1
METALSTRIP TYP.

B2
P4B2
WT1P4
B2
WT1P4 P4SS1PL3
P4 P4P4
B2SS1PL3
P4
B2B2SS1PL3
P4P4P4
B2WT1P4 P4SS1PL3B2
P4WT1
B2 B2 B2 B2
B2B2B2B2
B2 B2 B2 B2
B2B2B2B2
METALSTRIP TYP.METALSTRIP TYP. METALSTRIP TYP.

METALSTRIP TYP.METALSTRIP TYP.METALSTRIP TYP.
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
205
+44"+24"S

NNNN SN
+9'-0"+9'-0"+44"+24"S

NNNN SN
+9'-0"+9'-0"
+44"+24"S

NNNN SN
SFEC
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 3A-0.7A-
44" MAX1A
BASE BUILDING RESTROOMACCESSIBILITY PLANSA-0.7

AS NOTED
TYP. ACCESSORY MOUNTING DIMENSIONS3SCALE:NTS
INSULATE HOT ANDCOLD WATER WATERLAV-1MIRRORMIRROR@ COUNTERTOP OPEN

COMPARTMENT(SEE SCHEDULE)TOILET DISPENSERTOILET TISSUE

SANITARY FACILITIES
SUPPLY AND DRAIN PIPES3-4A
1314
7 SCREENWASTE RECEPTACLEWITH DISPOSALTAMPON VENDORSANITARY NAPKIN/DISPENSER ANDPAPER TOWEL-10 --
BARACCESSIBLE GRAB8BARACCESSIBLE GRAB8ASOAP DISPENSER11SOAP DISPENSER

BARACCESSIBLE GRAB-BARACCESSIBLE GRAB-
13-1/2"MINUR-1UR-2H.C.22H.C.
12 WC-1ACCESSIBLE-FLOOR/WALL MOUNTEDWC-1ACCESSIBLE-FLOOR/WALL MOUNTED1AWC-1WC-1- ACCESSIBLE-FLOOR/WALL MOUNTEDACCESSIBLE-FLOOR/WALL MOUNTED36" MIN.12"MIN.24"MIN.33"-36"12"42" MIN.MAX.24" MINFLUSH VALVEWIDE SIDE 17" TO19" MAX.17"-18"17" TO19" MAX.17"MAX.17"MAX.TRANSFERSIDE18"IF NOTTEMPERED5'-0"2'-0"V.I.F.3'-4" MAX.3'-4" MAX.3'-4" MAX.17" MIN.11"MIN.2'-3" MIN.9"MIN.6" MAX.2'-5" MIN.2'-10" MAX.36" MAX.19"7"-9"MAX.17"-18"33"-36"TOP OF GRIP36"24"MIN.12"MIN.24"MIN.42"12"MAX.54" MIN.17"-18"33"-36"33"-36"36"24"MIN.12"MIN.24"MIN.42"12"MAX.54" MIN.

WALLMOUNTEDCOUNTERTOPMOUNTEDTOP OFFIN. FLR.3'-4" MAX.3'-4" MAX.3'-4" MAX.3'-4" MAX.OPEN5'-0"1'-0"5'-10"2'-0" STD.2'-10" HCP.33" MAX.BABYCHANGING TABLESEAT COVERDISPENSER COMBINATIONSEAT COVERDISPENSER 54" MIN.19" MIN. TOOPENINGSANITARY NAPKINDISPOSAL UNIT
5'-0"
CL1716
1819
A TRIANGLE SYMBOL SHALL BE LOCATEDAT ENTRANCES TO MEN’S TOILET ANDBATHING FACILITIES. THE TRIANGLESYMBOL SHALL BE AN EQUILATERALTRIANGLE 1/4 INCH (6.4 MM) THICK WITHEDGES 12 INCHES (305 MM) LONG AND AVERTEX POINTING UPWARD. THE COLOROF THE TRIANGLE SYMBOL SHALLCONTRAST WITH THE COLOR OF THEDOOR OR SURFACE ON WHICH THETRIANGLE SYMBOL IS MOUNTED, EITHERLIGHT ON A DARK BACKGROUND OR DARKON A LIGHT BACKGROUND.A CIRCLE SYMBOL SHALL BE LOCATED ATENTRANCES TO WOMEN’S TOILET ANDBATHING FACILITIES. THE CIRCLE SYMBOLSHALL BE 1/4 INCH (6.4 MM) THICK AND12 INCHES (305 MM) IN DIAMETER. THECOLOR OF THE CIRCLE SYMBOL SHALLCONTRAST WITH THE COLOR OF THEDOOR OR SURFACE ON WHICH THECIRCLE SYMBOL IS MOUNTED, EITHERLIGHT ON A DARK BACKGROUND ORDARK ON A LIGHT BACKGROUND.NOTES1. THESE SYMBOLS' COLOR AND CONTRAST SHALL BE DISTINCTLY DIFFERENT FROM THE COLOR AND CONTRAST OF THE DOORS.2. REFER TO DOOR HARDWARE GROUP SECTION OF THE SPECS. FOR ADA REQUIRED RESTROOM SIGNS AND LOCATIONS.TOP OFFLR. FIN.AT DOOR 15 20
A COMBINED CIRCLE AND TRIANGLE SYMBOLSHALL BE LOCATED AT ENTRANCES TO UNISEXTOILET AND BATHING FACILITIES. THE COMBINEDCIRCLE AND TRIANGLE SYMBOL SHALL CONSISTOF A CIRCLE SYMBOL 1 /4 INCH (6.4 MM) THICKAND 12 INCHES (305 MM) IN DIAMETER WITH A 1/4 INCH (6.4 MM) THICK EQUILATERAL TRIANGLESYMBOL SUPERIMPOSED ON ANDGEOMETRICALLY INSCRIBED WITHIN THE 12-INCH(305 MM) DIAMETER OF THE CIRCLE SYMBOL.THE VERTICES OF THE TRIANGLE SYMBOL SHALLBE LOCATED 1/4 INCH (6.4 MM) MAXIMUMFROM THE EDGE OF THE CIRCLE SYMBOL WITH AVERTEX POINTING UPWARD. THE COLOR OF THETRIANGLE SYMBOL SHALL CONTRAST WITH THECOLOR OF THE CIRCLE SYMBOL, EITHER LIGHT ONA DARK BACKGROUND OR DARK ON A LIGHTBACKGROUND. THE COLOR OF THE CIRCLESYMBOL SHALL CONTRAST WITH THE COLOR OFTHE DOOR OR SURFACE ON WHICH THECOMBINED CIRCLE AND TRIANGLE SYMBOL ISMOUNTED, EITHER LIGHT ON A DARKBACKGROUND OR DARK ON A LIGHTBACKGROUNDMOUNT BRAILLE SIGNAGE TO STRIKE SIDE OF DOOR, TYP.AT WALLRESTROOMMENWOMEN5'-0"BOTTOM OFHIGHEST LINEOF TEXT4'-0"BOTTOM OFLOWEST LINEOF BRAILLE6"6"2"6"6"2"6"6"2" 5SCALE1/4" = 1'-0"ENLARGED CONSTRUCTION PLAN - MEN'S RESTROOM & WOMEN'S RESTROOM 109 & 110MEN'SRESTROOM109WOMEN'SRESTROOM110 TESTINGRESTROOM 02112 RESTROOM134 9SCALE1/4" = 1'-0"ENLARGED CONSTRUCTION PLAN - TESTING RESTROOM 02 11213SCALE1/4" = 1'-0"17SCALE1/4" = 1'-0"ENLARGED CONSTRUCTION PLAN - TESTING RESTROOM 01 114ENLARGED CONSTRUCTION PLAN - RESTROOM 134 7SCALE1/4" = 1'-0"ENLARGED FINISH PLAN - MEN'S RESTROOM & WOMEN'S RESTROOM 109 & 11011SCALE1/4" = 1'-0"ENLARGED FINISH PLAN - TESTING RESTROOM 02 11215SCALE1/4" = 1'-0"19SCALE1/4" = 1'-0"ENLARGED FINISH PLAN - TESTING RESTROOM 01 114ENLARGED FINISH PLAN - RESTROOM 134 6SCALE1/4" = 1'-0"ENLARGED CEILING PLAN - MEN'S RESTROOM & WOMEN'S RESTROOM 109 & 11010SCALE1/4" = 1'-0"ENLARGED CEILING PLAN - TESTING RESTROOM 02 11214SCALE1/4" = 1'-0"18SCALE1/4" = 1'-0"ENLARGED CEILING PLAN - TESTING RESTROOM 01 114ENLARGED CEILING PLAN - RESTROOM 134 GENERAL NOTES1.FOR RESTROOM FINISHES, REFER TO FINISH SCHEDULE THIS SHEET; FOR RESTROOM EQUIPMENTS SCHEDULE, REFER TOEQUIPMENTS SCHEDULE THIS SHEET.2.REFERENCE MILLWORK NOTES ON SHEET A-30.5 SPECIFICATIONS AND GENERAL REQUIREMENTS.3.FOR LIGHT FIXTURES REFERENCED ON PLANS, REFER TO SHEET A-4.0 FOR FIXTURE SCHEDULE.4.GROUT LINES SHOULD BE FILLED AS CLOSE TO THE TOP AS POSSIBLE (EXCEPT FOR CUSHION EDGE TILE). ALL GROUT LINESSHALL BE UNIFORMLY FINISHED.5.G.C. TO VERIFY IN FIELD THE WALL THICKNESS IF RECESSED RECEPTACLES SPECIFIED IN THE DRAWINGS WILL FIT WITHINTHE EXISTING FRAMING. NOTIFY SAA IN ADVANCE, IF THERE ARE ANY ISSUES.6.ALL SCHLUTER STRIPS TO BE MITERED AT CORNERS, TYPICAL. AVOID SHARP EDGES.7.PROVIDE INTERIOR AND OUTSIDE CORNERS AT COVED BASE TYPICAL.8.FLOOR GROUND SURFACE SLOPE SHALL NOT BE STEEPER THAN 1:48 (2%) PER CBC 11B-305.2. TILE FLOOR TO SLOPE TODRAIN 1/4" PER 1'-0" MAXIMUM.9.WET FLOOR TILES SHALL HAVE A 0.60 STATIC COEFFICIENT OF FRICTION PER ASTM C1028. NOTES TO GC1.GENERAL CONTRACTOR TO PROVIDE SUBMITTAL AND CONFIRM ALL ACCESSORIES ARE INSTALLED TO MEET ADA REQUIREMENTS. PLEASE COORDINATE ORIENTATION OF ACCESSORIES AND FIXTURES BASED ON FIELD CONDITIONS ANDFINAL LAYOUT. EQUIPMENT SCHEDULES IS FOR REFERENCE, SOME VARIATION OF THE MODEL SHALL OCCUR AS REQUIREDIN THE FIELD.2. GC TO FIELD VERIFY ALL EXISTING UTILITIES UNDER THE SINK TO ENSURE NEW FITTINGS SUCH AS FAUCETS, SOAP DISPENSERS, PLUMBING FIXTURES WILL BE ACCOMMODATED PER PLAN. NOTIFY SAA IN ADVANCE FOR ANY CONFLICTS ANDDEVIATIONS.3. GC TO FIELD VERIFY EXISTING CONDITIONS ABOVE THE CEILING AND NOTIFY SAA OF POTENTIAL CONFLICTS WHICH INCLUDEDUCTS, EXISTING FRAMING, ETC.

CONSTRUCTION LEGENDEXISTING WALL TO REMAIN.EXISTING DOOR, DOOR FRAME AND DOOR HARDWARE IS TO REMAIN AT LOCATION SHOWN.NEW CONSTRUCTION, TYPICAL PARTITION UNLESS OTHERWISE NOTED.PARTITION TYPE SYMBOL.SEE PARTITION TYPES LEGEND ON SHEET A-2.0 FOR REFERENCED DETAILS.NEW SINGLE DOOR, DOOR FRAME AND HARDWARE.ROOM KEY SYMBOLROOM NAMEROOM NUMBERXXNAME100#RESTROOM EQUIPMENT SCHEDULE. REFER TO SHEET A-0.7A.INDICATES FULL TILE.RESTROOM EQUIPMENT SCHEDULEFOR EQUIPMENT TAG REFERENCED ON PLANS, REFER TO SHEET A-0.7A.

NEW DRYWALL CEILING, HEIGHT IS INDICATED IN BUBBLE IF NOT STANDARD. REFER TODETAIL A-30.2.CEILING HEIGHT AS INDICATED.+X'-X"REFLECTED CEILING LEGEND4" DIA. ROUND RECESSED LED WITH FLANGE. REFER TO LIGHT FIXTURE SCHEDULE ONSHEET A-4.0.RESTROOM FINISH LEGENDWALL FINISHTYPE OF FINISHFINISH NUMBERSPECIAL FINISHTYPE OF FINISHFINISH NUMBERXXXXXXXXPATTERN DIRECTIONFLOOR BASETYPE OF FINISHFINISH NUMBERFLOOR FINISHTYPE OF FINISHFINISH NUMBERXXXXXXXXFLOOR TRANSITION

FINISH SCHEDULE
:FLOOR TILE:RESTROOMS:DALTILE MARAZZI:SOCIETY PARK LANE GRAY:SO47:12X24: MATTE:#542 GRAY STONE:PER MANUFACTURER SPECS - STAGGERED INSTALLATION, OVERLAP SHOULD NOTEXCEED 3%:PROVIDE 4" BASE CUT IN FIELD AT WATER HEATER CLOSET AND WASHER/DRYER1/8" GROUT LINE THICKNESS MAX. PER MANUFACTURER SPEC.ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEFINISHGROUTINSTALLATIONNOTEFT1 :ACCENT PAINT (RESTROOMS):REFER TO PLANS:DUNN EDWARDS:WARM WHITE DEW380:SEMI-GLOSS TYPICAL, FLAT AT CEILING:2 COATS MINIMUM:KIM HAMPTON ([email protected])ITEMLOCATIONMANUFACTURERCOLORFINISHINSTALLATIONCONTACTP4:WALL TILE:RESTROOMS:EMSER TILE:CATCH:ICE:4X16:CUSTOM BUILDING PRODUCTS PRO FUSION #640 ARCTIC WHITE:6'-6" AFF WITH TRANSITION STRIP AT TOP:JUAN CAMARILLO, [email protected], 323-854-8894ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEGROUTNOTECONTACTWT1:WALL BASE:REFER TO PLANS - RESTROOMS:DALTILE:PARK LANE GREY:SO47:6" X 12":CUSTOM BUILDING PRODUCT, GROUT COLOR: #542 GRAYSTONE:ALIGN GROUT LINE BASE AND WALL:MIRA CLUTTER ([email protected]), C: 714-213-9500ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEINSTALLATIONNOTECONTACTB2 R2.1PROVIDE WALL BACKING FOR NEW MIRROR, AS REQUIRED.R2.2PROVIDE SUPPORT IN WALL FOR GRAB BARS PER MANUFACTURER SPECIFICATIONS. RESTROOM CONSTRUCTION KEYNOTES RESTROOM REFLECTED CEILING KEYNOTESR4.1PROVIDE NEW ACCESS PANEL. REFER TO ENGINEERING DRAWINGS, PAINT TO MATCH CEILING. RESTROOM FINISH KEYNOTESR5.2NEW FLOOR DRAIN COVER, STAINLESS STEEL BRUSHED FINISH.R5.1ALL FLOOR AND WALL BASE TILE GROUT LINES TO ALIGN, TYP, U.O.N.R5.3GENERAL CONTRACTOR TO CONFIRM NEW/EXISTING SUBSTRATE THAT WILL BE RECEIVING NEW WALL TILE WT-1AND WT-2 IS STRAIGHT AND APPROPRIATE TO RECEIVE STAGGERED SUBWAY TILE INSTALLATION (50% OVERLAP);REVIEW FIELD CONDITIONS AND PROVIDE ALLOWANCE IF REQUIRED.

FT1R5.3R5.2R5.1WT2P4B2 FT1R5.3R5.2R5.1WT2P4B2 FT1R5.3R5.2R5.1WT2P4B2 P4CLG.R4.1P4CLG.R4.1P4CLG.R4.1P4CLG.R4.1P4CLG.R4.1
R2.2ABCD152024" MIN.9'-2"36" MIN.59" MIN.8A17"-18"81A60" MINDIAMETERCLEAR.1'-6"R2.14330"X48"CLEARSPACE8'-0"TESTINGRESTROOM 01114208'-0"15R2.2ABCD4A-0.7A 24" MIN.9'-2"36" MIN.59" MIN.1'-6"R2.14330"X48"CLEARSPACE60" MINDIAMETERCLEAR.8A81A17"-18"15207'-7"R2.27'-7"24" MIN.8A17"-18"81A60" MINDIAMETERCLEAR.30"X48"CLEARSPACE1'-6"R2.143ABCD EXISTING DRYWALL CEILING TO REMAIN.
17161819
8A81A8A81A1A1A1A1AR2.2R2.260" MINDIAMETERCLEAR.60" MINDIAMETERCLEAR.30"X48"CLEARSPACE30"X48"CLEARSPACE 2'-0"
2'-0"
17"-18"17"-18"24" MIN.24" MIN.12'-5"15'-6"
BCD1A-0.7A5'-1"2'-2"2'-11"4'-11"EQ.EQ.2'-0"30"X48"CLEARSPACE 5'-1"2'-2"3'-4"5'-0"3'-0"3'-0"4'-1"4'-0"4'-0"22A24
12A
3A 3A13TYP.13TYP.14113A113A113A113A113A11BCD2A-0.7A
RESTROOM134
RESTROOM134
TESTINGRESTROOM 01114
TESTINGRESTROOM 01114
TESTINGRESTROOM 02112
TESTINGRESTROOM 02112
MEN'SRESTROOM109WOMEN'SRESTROOM110
MEN'SRESTROOM109WOMEN'SRESTROOM110
1A-0.7B1AA-0.7A2AA-0.7A 23
SS1PL3
:PLASTIC LAMINATE:REFER TO PLANS - RESTROOMS:FORMICA:STAINLESS ALUMINUM M4194-99:EMILY DUBAN, [email protected], 949-301-7535ITEMLOCATIONMANUFACTURERCOLORFINISH:SOLID SURFACE:MILLWORK-HORIZONTAL SURFACES:VADARA:PHANTOM TRAIL V814:STUART AYERS, [email protected], 844-482-3272ITEMLOCATIONMANUFACTURERCOLORCONTACTPL3SS1 SS1PL3WT1WT1
4'-0"
4'-0" 4'-0"6'-0"6'-0"
6'-0"
PROVIDE DOUBLE BEVELED STONE THRESHOLD. VERIFY EXACT DIMENSIONS IN FIELD. COLOR: CARRARA WHITEMARBLE M701-POLISHED.R5.4 R5.4 R5.4R5.4R5.4R5.4R5.4
CL1'-6"4'-6"CL1'-6"4'-6" LCCLCLCLCLCL CLCLCLCLCLCLCLCLCL CL 1'-6"4'-0"4'-0"1'-6"5'-3"
2'-6"2'-0"2'-0"EQ.EQ.

EQ.EQ.2'-0"2'-0"2'-0"EQ.EQ.

EQ.EQ. LF-4LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3
LF-3LF-3LF-3LF-3LF-3
LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3
R5.3R5.2R5.1R5.3R5.2R5.1FT1P4B2FT1P4B2
:WALL TILE - AT SINGLE RESTROOMS:RESTROOMS:EMSER TILE:CATCH:ICE:4X10:CUSTOM BUILDING PRODUCTS PRO FUSION #640 ARCTIC WHITE:6'-6" AFF WITH TRANSITION STRIP AT TOP:JUAN CAMARILLO, [email protected], 323-854-8894ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEGROUTNOTECONTACTWT2 10 10 10
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
206

ELEVATION A
9'-0"CEILING HEIGHT
33"-36"TOP OF GRAB BAR12"MAX.42" MIN.54" MIN.6'-6"17" TO 19"MAX. 9'-0"CEILING HEIGHTELEVATION BELEVATION C
9'-0"CEILING HEIGHT2'-10"6'-6"ELEVATION D2'-10"3'-4" MAX.1'-6"17"-18"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX.6'-6"9'-0"CEILING HEIGHT

ELEVATION AELEVATION BELEVATION CELEVATION D
2'-10"CEILING HEIGHT V.I.F.6'-6"3'-4" MAX.1'-6"17"-18"12"MIN.24" MIN.36" MIN.33"-36"TOP OF GRAB BARCL17" TO 19"MAX.

CEILING HEIGHT V.I.F.
33"-36"TOP OF GRAB BAR12"MAX.42" MIN.54" MIN.6'-6"17" TO 19"MAX.

CEILING HEIGHT V.I.F.
2'-10"
6'-6"CEILING HEIGHT V.I.F.
+9'-0"
RESTROOM ELEVATIONSA-0.7B

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 1SCALE3/8" = 1'-0"ELEVATIONS AT RESTROOM #134NOTE:*REFER TO SHEET A-5.0 FOR FINISH SCHEDULE.

WT2SEMI GLOSSP4METALSTRIP TYP.WT2SEMI GLOSSP4METALSTRIP TYP.WT2SEMI GLOSSP4METALSTRIP TYP.SEMI GLOSSP4 8SCALESPECIFYNOT USED12SCALESPECIFYNOT USED16SCALESPECIFYNOT USED 7SCALE1/4" = 1'-0"ENLARGED CEILING PLAN - CLIENT RESTROOM 17311SCALE1/4" = 1'-0"ENLARGED FINISH PLAN - CLIENT RESTROOM 17315SCALESPECIFYNOT USED19SCALESPECIFYNOT USED 14SCALESPECIFYNOT USED18SCALESPECIFYNOT USED
13SCALESPECIFYNOT USED17SCALESPECIFYNOT USED
PLUMBING OCCUPANCY CALCULATIONSWATER CLOSETSTOTAL USABLE SQUARE FOOTAGE OF 1ST FLOOR: 18,096 SQ. FT.18,096 SQ. FT. / 200 OCCUPANT LOAD FACTOR = 90 TOTAL OCCUPANTS90 TOTAL OCCUPANTS / 2 = 45 MALE OCCUPANTS AND 45 FEMALE OCCUPANTSREQUIRED # OF FIXTURESPROVIDED FIXTURESMEN'S RESTROOMWOMEN'S RESTROOM2244 URINALSREQUIRED # OF FIXTURESPROVIDED FIXTURESMEN'S RESTROOMWOMEN'S RESTROOM12-- LAVATORIESREQUIRED # OF FIXTURESPROVIDED FIXTURESMEN'S RESTROOMWOMEN'S RESTROOM2323 DRINKING FOUNTAIN = 1 PER 150 3SCALE1/4" = 1'-0"ENLARGED CONSTRUCTION PLAN - CLIENT RESTROOM 173 B2B2B2B2
2SCALE3/8" = 1'-0"ELEVATIONS AT CLIENT RESTROOM #173
NOTE:*REFER TO SHEET A-0.7 FOR CONSTRUCTION/REFLECTED CEILING/FINISH KEYNOTES 2A-0.7BCLIENTRESTROOM173 FT1R5.3R5.2R5.1P4B2P4CLG.R4.1R2.2ABCD152024" MIN.8'-0"8A17"-18"81A60" MINDIAMETERCLEAR.1'-6"R2.14330"X48"CLEARSPACE R5.4LF-3CLIENTRESTROOM173 CLIENTRESTROOM173 9'-5" LF-3CL
EQ.EQ.4'-0"1'-6"WT24'-0"
FOR EQUIPMENT TAG REFERENCED ON PLANS, REFER TO SHEET A-0.7A.

RESTROOM KEYNOTESRESTROOM EQUIPMENT SCHEDULEFINISH SCHEDULENOTE:*REFER TO SHEET A-0.7 FOR FINISH SCHEDULE 10 WT2B2
SEMI GLOSSP4SEMI GLOSSP4SEMI GLOSSP4SEMI GLOSSP4
B2B2B2 WT2WT2 METALSTRIP TYP.METALSTRIP TYP.METALSTRIP TYP. 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
207
XXXXXXXXXX +7 1/2" AFF+45 3/4" AFF+37 3/4" AFFFAFEFAFAFAFAFAFA FAW/HW/HFEEXISTING FLOOR PLAN1/8" = 1'-0" PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:STAMP AND SIGNATURE:CONSULTANTS:DATEDESCRIPTION DELTADRAWINGS ISSUE6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED10/22/24KLMP635036CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCAEXISTING SINGLE DOOR.

N
LEGENDEXISTING WALL.AREA NOT IN CONTRACT (N.I.C.)EXISTING DOUBLE DOOR. 208
(E) SFEC
DEMOLITION PLANA-1.0
1/8" = 1'-0"
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA EXISTING SINGLE DOOR TO REMAIN. CLEAN, REPAIR AND REPAINT DOOR PER FINISHPLANS AND DOOR SCHEDULE.DEMOLITION SHEET NOTES1.REFER TO SHEETS A-0.2 AND A-0.3 FOR TYPICAL SPECIFICATIONS. REFER TO SHEET A-0.1 FOR GENERAL DRAFTINGSTANDARDS AND ABBREVIATIONS USED. REFER TO SHEET A-0.2 FOR GENERAL NOTES. REFER TO SHEET A-0.6A ANDA-0.6B FOR DISABLED ACCESS NOTES. REFER TO SHEET A-0.1 FOR FIRE AND SAFETY NOTES.2.REFER TO SHEET A-0.2 FOR TYPICAL DEMOLITION NOTES AND PATCHING AND CLEANING NOTES.N DEMOLITION KEYNOTESCONTRACTOR TO REMOVE EXISTING DOORS AND FRAMES U.O.N. RETURN TO BUILDING STORAGE AS DIRECTEDBY BUILDING OWNER.1.1ALL DEMOLITION SCOPE OF WORK INCLUDING CEILING DEMOLITION TO BE DONE UNDER A SEPARATE PERMIT.CONTRACTOR TO REFER TO SEPARATE DEMOLITION SET FOR FURTHER QUESTIONS.1.2DEMOLITION LEGENDEXISTING WALL TO REMAIN.AREA NOT IN CONTRACT (N.I.C.)EXISTING DOUBLE DOOR TO REMAIN. CLEAN, REPAIR AND REPAINT DOOR PER FINISHPLANS AND DOOR SCHEDULE.EXISTING DOUBLE DOOR TO BE REMOVED. REFER TO DEMOLITION KEYNOTES FORMORE INFORMATION.

1.1 EXISTING FIRE EXTINGUISHER TO REMAIN.(E) SFEC

1.2THROUGHOUT U.O.N.
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
209

SFECSFEC

SFEC SFEC

SFECSFECSFEC
SFEC

SFECSFECSFECSFEC
(E) SFEC
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA A-2.0CONSTRUCTION PLAN1/8" = 1'-0"
LOBBY100RECEPTION101 SERVICE CHIEFOFFICE124RESTROOM134
CLIENTRESTROOM173
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151STAFFBREAK ROOM147EXITVESTIBULE148 GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136MULTI PURPOSEOFFICE132 OPEN WORKCOLLABORATION154
BLDG.JANITORS149PRIVATE OFFICE167
CLUBHOUSE174SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118 STORAGE115TESTINGRESTROOM 01114MOTHER'SROOM108MEN'SRESTROOM109MDF/IDF111 PRIVATE OFFICE144GROUP ROOM 04142GROUP ROOM 03140PRIVATE OFFICE116CLIA STOR.117 CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159 INTERNOFFICE 01153 GROUP ROOM 02141
CLINICIAN'SOFFICE 13135LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131TESTINGRESTROOM 02112TESTING OFFICE113VESTIBULE107WOMEN'SRESTROOM110 CL CL
6A-30.0TYP.15'-0"
10'-0"
6'-0"5'-0"15'-9"15'-9"
4'-10"±5'-0"10'-0"
10'-0"6'-0"8'-10"8'-0"13'-2"8'-0"3'-0"9'-0"5'-0"11'-0"11'-0"16'-0"5'-0"6'-11" 5'-0"11'-7"11'-7"5'-0"5'-0"EQ.EQ.
16'-0"2'-0"
CL
16A-30.0
2'-0"5'-0" 11'-0"5'-0"EQ.EQ.±11'-9"±23'-5"5'-0"
12'-4"10'-0"10'-0"10'-0"5'-0" CL
3'-0"
5'-0"CLOF DOOR2'-6"
10'-0"10'-0"10'-0"10'-0"
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
2'-7"3'-6"
11'-0"EQ.EQ.
12'-0"5'-0"11'-0"11'-0"10'-0"10'-0"10'-0"5'-0"
10'-4"10'-4"10'-4"
CL 11'-0"11'-0"
5'-0"11'-0"11'-0"
1391B1401B1372B1362B1352B1322B1312B1302B1292B1282B1442A1432B 1252B1262B1272B1183A 1242B1232B1222B1212B1202B
1162A1172A
1411B1421B1462A
1152A1062F1002F1502F 1032C1052B1042B1012B1742F 1072F1721B1711B1702B1692B1682B 1662B1652B1642B1612B1622B
1552B1562B1572B1582B 1532B1522B1592B1602B1512A1495A1672A147A5F 1472F1091A1101A1112A1083A 1143A1132A1123A1022B
1485F
113A4D113B4D
1632B
163A2B
1733A 101A2F DOOR TYPETYPEDETAILDESCRIPTION
NOTE: ALL NEW DOORS ARE TO BE 3'-0" WIDE MIN. UNLESS OTHERWISE NOTED.NOTE: ALL NEW DOOR PULL HARDWARE TO BE ACCESSIBLE, APPROVED "LEVER" TYPE.

AREA NOT IN CONTRACT (N.I.C.).EXISTING CONSTRUCTION TO REMAIN.EXISTING DOOR, DOOR FRAME AND DOOR HARDWARE IS TO REMAIN AT LOCATION SHOWN.NEW CONSTRUCTION, TYPICAL PARTITION UNLESS OTHERWISE NOTED.PARTITION TYPE SYMBOL.SEE PARTITION TYPES LEGENDNEW SINGLE DOOR, DOOR FRAME AND HARDWARE.ROOM KEY SYMBOLROOM NAMEROOM NUMBER- A1EXTEND TO FACE OF FINISHED CEILING. PROVIDE INSULATION IN THE STUD CAVITY.NAME100 NOTE:CONTRACTOR TO IDENTIFY IN BID AND INCLUDE IN PRICING ALL ITEMS LIKELY TO BE REQUIRED BY TITLE 24, CHAPTER 6 PART141.0 AND 141.1 BASED ON SCOPE OF WORK SHOWN IN PLAN. THIS SHALL INCLUDE (AS APPLICABLE) BUT NOT LIMITED TO:DESEGREGATION OF ELECTRICAL PANELS, CONTROLLED RECEPTACLES, DAYLIGHTING CONTROLS, OCCUPANCY SENSORS,MULTI-LEVEL SWITCHING AND/OR DIMMING, DEMAND RESPONSE AND HVAC EFFICIENCY MEASURES. 1/4" COPPER WATER LINESINGLE COMPARTMENT SINK. REFER TO ITEM #2 ON THE CONSTRUCTION SPECIFICATIONS ONSHEET A-0.3.

ELEVATION AA.BUILDING STANDARD SINGLE INTERIOR DOORTYPE:FRAME:HEIGHT:FINISH:1. INTERIOR LATCHSET LATCHSET: HINGES: DOOR STOP: DUSTPROOF: STRIKE:SCHLAGE L9010 03A 626PBB81 4.5X4.5 US26DHAGER 241F US26DBUILDING STANDARDBUILDING STANDARDWHITE OAK SOLID WOODBUILDING STANDARD WESTERNINTEGRATED ALUMINUM, CLEARANODIZED ALUMINUM8'-10"FACTORY FINISH WITH CLEAR VARNISHDOOR ELEVATIONS36"20A&B20E 20A - HEAD DETAIL20E - JAMB DETAILTYPICAL NOTES:1. REFER TO SHEET A-2.0 FOR PARTITION TYPES.2. REFER TO DOOR SCHEDULE FOR DOOR, FRAMES AND FINISHES.3. ALL GLAZING THICKNESS TO BE PER PROVIDED DETAILS ON A-30.4, U.O.N.4.AT ONE HOUR PARTITIONS USE 45 MIN. FIRE RATED MET. FRAMES AND CLEAR, WIRED-GLASS WITH THICKNESS PERPROVIDED DETAILS ON A-30.4. WIRED TO RUN IN A HORIZ. DIRECTION, U.O.N. 1/A-30.0
BUILDING STANDARD, SEMI - RECESSED FIRE EXTINGUISHER CABINET.REFER TO DETAILS #9 AND #10/A-30.0.REFER TO SHEET A-0.3 FOR SPECIFICATIONS.SFEC DOOR NUMBERDOOR TYPEDOOR HARDWARE100A1

2. INTERIOR LOCKSET LOCKSET: HINGES: DOOR STOP: DUSTPROOF: STRIKE: NOTE:SCHLAGE L9050L 03A 626MORTISE LOCKSETPBB81 4.5X4.5 US26DHAGER 241F US26DBUILDING STANDARDBUILDING STANDARDPROVIDE BUILDING STANDARD CLOSERAT DOORS WITH KEYCARD READER.PROVIDE CLOSER AT WATER HEATERCLOSET #132A3. INTERIOR LOCKSET - PRIVACY LOCKSET: HINGES: DOOR STOP: DUSTPROOF: STRIKE: NOTE:SCHLAGE L9050L 03A 626MORTISE LOCKSETPBB81 4.5X4.5 US26DHAGER 241F US26DBUILDING STANDARDBUILDING STANDARDPROVIDE PRIVACY INDICATOREWALL FURRING TO EXTEND 6" ABOVE FINISHED CEILING. NO INSULATION.2/A-30.0NEW FRAMED GLASS PARTITION.A1/A-30.0EXTEND TO FACE OF FINISHED CEILING.CONSTRUCTION LEGENDDOOR SCHEDULE DOOR DETAILSDOUBLE COMPARTMENT SINK. REFER TO ITEM #4 ON THE CONSTRUCTION SPECIFICATIONS ONSHEET A-0.3. 20B - HEAD DETAIL B15/A-30.0EXTEND 6" ABOVE THE FINISHED CEILING. PROVIDE INSULATION IN THE STUD CAVITY.C1FULL HEIGHT WALL. PROVIDE INSULATION IN THE STUD CAVITY.3/A-30.0J2FRAMED/FRAMELESS WINDOW WALL.11/A-30.4B.BUILDING STANDARD SINGLE INTERIOR DOOR WITH GLASS PANELTYPE:FRAME:HEIGHT:FINISH:GLASS:WHITE OAK SOLID WOODBUILDING STANDARD WESTERNINTEGRATED ALUMINUM, CLEAR ANODIZEDALUMINUM8'-10"FACTORY FINISH WITH CLEAR VARNISHCLEAR, TEMPEREDELEVATION B36"20A&B20E SINGLE COMPARTMENT SINK. REFER TO ITEM #5 ON THE CONSTRUCTION SPECIFICATIONS ONSHEET A-0.3.

DOOR HARDWARE LEVER:

C.BUILDING STANDARD DOOR WITH SIDELIGHTTYPE:FRAME:HEIGHT:FINISH:GLASS FINISH:GLASS THICKNESS:WHITE OAK SOLID WOODBUILDING STANDARD WESTERNINTEGRATED ALUMINUM, CLEARANODIZED ALUMINUM8'-10"FACTORY FINISH WITH CLEAR VARNISH.CLEARPER GLASS CHART A-30.4ELEVATION C36"REFERTO PLAN20A20F20CHARDWARE NOTE:ELECTRIFIED HARDWARE TO BE PROVIDED BY TENANT'SSECURITY VENDOR. GENERAL CONTRACTOR TO PREPDOORS TO RECEIVE TENANT'S KEYCARD READERSYSTEM.ALL DOOR HARDWARE TO MATCH BUILDING STANDARD.REFER TO A-3.0 FOR KEYCARD READER LOCATIONS.NOTE: ALL NEW DOOR PULL HARDWARE TO BE ACCESSIBLE, APPROVED "LEVER" TYPE.NOTE: ALL NEW DOORS ARE TO BE 3'-0" WIDE MIN.UNLESS OTHERWISE NOTED. 20C - HEAD DETAIL20F - JAMB DETAIL

ELEVATION D

4. POCKET DOOR HARDWARE POCKET PULL: NOTE:D.BUILDING STANDARD POCKET DOORTYPE:FRAME:HEIGHT:FINISH:WHITE OAK SOLID WOODASSA ABLOY PEMKO PF28200A WITH SOFTCLOSE8'-0" H X 3' DOOR, MIN. 32" CLEAR WHENDOOR IS OPEN.FACTORY FINISH WITH CLEAR VARNISH. 36"3/4" THICK FIRE TREATED PLYWOOD BACKBOARD FOR TENANT'S TELEPHONE EQUIPMENT. SEE A-3.0 FORADDITIONAL DETAILS AND COORDINATE WITH TENANT'S IT TEAM FOR EXACT SIZE AND LOCATION. PAINT TOMATCH ADJACENT WALL.2.42.5PROVIDE BLOCKING FOR TENANT'S WALL MOUNTED TELEVISION. SEE DETAIL 11/A-30.5.2.1INFILL EXISTING WALL/DOOR OPENING. MATCH EXISTING STUD WIDTH, TAPE (FIRE TAPE, 1-HR RATEDCONSTRUCTION IF REQUIRED) SAND, SMOOTH AND PREP FOR NEW FINISHES.1/4" DIAMETER COLD COPPER WATER LINE FOR COFFEE MAKER WITH SHUT OFF VALVE.1/4" DIAMETER COLD COPPER WATER LINE FOR REFRIGERATOR AND BOTTLE FILLER WITH SHUT OFF VALVE.2.22.3CONSTRUCTION KEYNOTES2.62.8REFER TO ENGINEERING DRAWINGS FOR PLUMBING REQUIREMENTS AND FIXTURES FOR NEW WATER HEATERCLOSET. PROVIDE JANITOR SINK AND FAUCET PER PLUMBING DRAWINGS.PROVIDE 4' H PARTIAL HEIGHT FRAMED SHATTER PROOF GLASS AT +40" AFF. FRAME TO MATCH DOOR ASSEMBLYADJACENT. REFER TO ELEVATIONS FOR ADDITIONAL INFO.2.9FIELD VERIFY AND PONY UP EXISTING WALL TO DECK ABOVE WITH INSULATION IN STUD CAVITY TO MATCH WALLTYPE C1. REWORK EXISTING CEILING SYSTEM AND PROVIDE BUILDING STANDARD WALL ANGLES.TOUCH UP / REPAIR EXISTING DOORS AND DOOR FRAMES LIKE NEW CONDITION (TYPICAL) IN SCOPE AREA.2.11EXISTING PANIC HARDWARE TO REMAIN AT ALL EXTERIOR DOORS. COORDINATE WITH TENANT'S SECURITYVENDOR FOR ELECTRIFIED HARDWARE REQUIREMENTS, REPLACE EXISTING HARDWARE AS REQUIRED INCLUDINGPUSH BAR, WEATHER STRIP, THRESHOLD, CLOSER, AND LOCKING DEVICE AS REQUIRED. PROVIDE DOORPULL/LEVER FROM OUTSIDE, COORDINATE WITH TENANT SECURITY VENDOR FOR REQUIREMENTS.2.12PROVIDE LOCKS AT CABINET DOORS. ALL CABINET LOCKS TO BE ON SINGLE KEY.2.14PRIVATE OFFICE #167 AND #144 TO BE LOCKED ON A SEPARATE MASTER KEY SEPARATE FROM REST OF THEFLOOR. COORDINATE WITH COUNTY FOR FINAL APPROVAL.2.152.16PROVIDE (1) FLOOR SINK IN EACH RESTROOM, PROVIDE SQUARE DRAIN COVER.2.18PROVIDE NEW BUILDING STANDARD SEMI-RECESSED FIRE EXTINGUISHER CABINET. REFER TO SHEET A-0.3 FORSPECIFICATIONS.2.17CONTRACTOR TO PROVIDE BUILDING STANDARD DOOR STOP THROUGHOUT SCOPE AREA INCLUDING EXISTINGTO REMAIN DOORS. VERIFY IN FIELD.2.13ALL LOCKS TO BE ON SINGLE KEY MASTER U.O.N.2.19 SERVICE CHIEF DOCTOR'S AND SUPERVISOR'S OFFICES #103, 124, 137 AND 157 LOCKED ON SAME MASTER KEYSEPARATE FROM REST OF THE FLOOR. COORDINATE WITH COUNTY FOR FINAL APPROVAL.2.7PROVIDE SOUND CAULKING AT MULLION CONNECTIONS THROUGHOUT TENANT SPACE.2.10 INFILL EXISTING DOOR OPENING, MATCH EXISTING GLAZING ADJACENT.

WALL TYPE
ASSA ABLOY PAIR OF PUSH/PULLROCKWOOD 102-RKW 5-1/2"US26D FINISHPROVIDE BUMPER IN POCKET TOPREVENT DOOR FROM FULLYRECEDING.

N
A2TYP.C1C1C1 C1
C1B1A2TYP.

A2TYP.A2TYP. A2TYP.

A2TYP.

AC1
C1C1C1C1
C1
C1
C1C1C1 B1B1C1C1C1C1C1
B1A
A2TYP. A2TYP.A2TYP.

A2TYP.

A
A2TYP.C1B1C1B1 AA2TYP.J2 A2TYP.

A2A2A2
A2EXTEND TO FACE OF FINISHED CEILING. PROVIDE INSULATION IN THE STUD CAVITY ANDINSULATION BLANKET OVER CEILING.1/A-30.0

2.12.12.32.32.32.3 2.3

2.5 2.5

2.6 2.11THROUGHOUT,U.O.N.2.13

2.152.14

2.16 2.162.16

2.7 2.7

2.7 2.10TYP.

2.10TYP.

2.10TYP.
5A-0.713A-0.79A-0.7
17A-0.7
10A-20.016A-20.012A-20.0
1CA-20.0A-20.01
6A-20.03A-20.02A-20.0BA
6"6"12"
REPLACE DOOR HARDWARE TO A LOCKSET.2.20REPLACE DOOR HARDWARE TO PRIVACY LOCKSET.2.21

2.202.212.112.122.112.5E2.112'-2"2.18
E.BUILDING STANDARD SINGLE INTERIOR DOOR WITH GRILLED VENTTYPE:FRAME:HEIGHT:FINISH:WHITE OAK SOLID WOODBUILDING STANDARD WESTERNINTEGRATED ALUMINUM, CLEARANODIZED ALUMINUM7'-0"FACTORY FINISH WITH CLEAR VARNISH ELEVATION E20E36"20AGRILL VENT2'-0"1'-6"
132A2E
WATER HEATER CLOSET132A

2.1C12.8C1C1B1B1B1A22.182.112.126'-9"

2.112.122.18

2.18C1A12.52.5

2.112.122.112.182.112.122.112.112.182.112.11

2.182.52.112.12

2.9C12.12.9

2.18 2.112.12C1

2.18 2.42.18AA

2.18 2.22.22.18A A1A1
OPEN COLLAB.138A
B1
CL13A-30.0
1'-10"27'-5"
C12.6 A
A1
11A-20.0
8'-0"2'-0" 7'-0"14'-0"EQ.EQ.EQ.

EQ.EQ. ±10'-10"60" MIN CLR

5. CORRIDOR LOCKSET LOCKSET: HINGES: DOOR STOP: DUSTPROOF: STRIKE: CLOSER: NOTE:SCHLAGE L9050L 03A 626MORTISE LOCKSETPBB81 4.5X4.5 US26DHAGER 241F US26DBUILDING STANDARDBUILDING STANDARDBUILDING STANDARDF.BUILDING STANDARD SINGLE INTERIOR DOOR WITH GLASS PANELTYPE:FRAME:HEIGHT:FINISH:GLASS:WHITE OAK SOLID WOODBUILDING STANDARD WESTERNINTEGRATED ALUMINUM, CLEAR ANODIZEDALUMINUM8'-10"FACTORY FINISH WITH CLEAR VARNISHCLEAR, TEMPERED, 7"X22" ELEVATION F36"20A&B20E
PROVIDE (1) LAYER OF DRYWALL LAMINATED OVER EXISTING POST. PREP TO RECEIVE P-1 FIELD PAINT. REFER TOFINISH PLAN FOR SPECIFICATION.2.22

2.222.222.222.22

2.22 2.22

2.222.22
PROVIDE (1) ADDITIONAL LAYER OF 5/8" QUIETROCK STAGGER HUNG ON EACH SIDE FOR ADDITIONAL SOUNDATTENUATION.2.23

2.72.232.232.152.14AA2.912"MIN.18"MIN.2.23

2.232.232.163A-0.7BB1A12.19THROUGHOUT U.O.N.A2

2.17 A2A15A-20.07A-20.0
CHART/SUPPLY/STORAGE146CONFERENCE ROOM143
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
210

SURFACE
POWERPANELPOWERPANELPOWERPANELPANEL BOARDSWITCHBOARDSWITCH BOARDSWITCH BOARDSURFACESURFACESURFACEFIRECONTROLPANELBUILDINGPOWERTBBEPEPEPEPEPEP+36" SURFACEEPEPPANEL WITH21THERMOSTATS +7"SURFACE
+42"GFI
J
GFI+18" SURFACEBLDG. ELECTRICAL ROOM
DW
NN
NJ

NNJNNNNNNJNNNNNJNNNNNNNNKNJNNNNNNNNNNNNNJNNN NNNNNNNNNNNJNNN JNNN JNNNNNNNJNNNJNNNNNNNJNNNNNNNJNNNJNNNNNNNJNNNJNNNNNNNNNJNNNJNNNNNNNJNNNJNNNNNKNNNNNNNNNJNNNNNNN+44"+44"+44"NNNNNNKNKNKNNNJNNNNNJNNNKNNNNNNNNNNNKNKN JNKNNGFI+44"NJNNGFI+44"NN+44"N+44"NNNNKNNNNGFI+44"NGFI+44"NGFI+44"NGFI+44" NNNNN+60"NN NNNKN

JNNNNNJNNNNNNNJNNN NNNNNNJNNN JNNNJNNNNNNJNNNJNNNNNN

NNJNNNJNNNNNNNN
NNN

KNNNNNJNNN NNNNJNNNJNNN KN

JNNNNNNNJNNNN
N
NNNN
NN
N+60"

NNNNJNNNJNNNN
NN
KN

KNJNNNNNNNNN
NNNN+60"NNKNNN+44"NSNNN+44"N+60"
NN+44"N+24"NSNNN+44"NNNNNN+44"N+44"N+44"NSNNN+44"
KNNN+44"N
NNNN
N N NN+44"N+44"NNNNNNJNNNNNNNN+44"NN
KNNN N+44"KNKNGFI+44"N N+44"

NNN NNNNNNNNNNN

NNNNNNNNNN NNN

NNNNNNNN
NNNNNN
NNNN

NNNNN NNNNNNNNNNNNNNNN NNN

NN NNNNNNNNN

NNNNNNNNN
KN
NNN
NNN
NNNN
N+44"JN
N+60"N NNN NN+44"N+24"NSNNN+44"N+44"NNNN NN+44"N+44"N+44"NS+44"NNNNNN N+44"PROVIDE POWER FOR AUTOMATIC PAPER TOWEL DISPENSER. BOBRICK B-29744, CONTRACTOR TO PROVIDE ANDINSTALL FIXTURE, REFER TO #3/A-0.7 FOR MOUNTING HEIGHT. PROVIDE 6" MIN WALL PER MANUFACTURALSPECIFICATION FOR SEMI RECESSED INSTALL.

PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA POWER/ VOICE/ DATA PLANA-3.0

AS NOTED
N WALL MOUNTED DUPLEX ELECTRICAL OUTLET. SEE ENGINEER'S DRAWINGS FOR CONDUIT SIZE.

KEY CARD READER. PROVIDE (1) 3/4" CONDUIT AND A FLUSH MOUNTED SINGLE GANG BOX. CONDUIT IS TO STUBOUT 6" ABOVE CEILING, STUB OUT ON CORRIDOR SIDE. AT HINGE SIDE OF DOOR PROVIDE A 3/4" CONDUIT ATTHE SECOND HINGE FROM THE BOTTOM TO 6" ABOVE THE CEILING, STUB OUT ON TENANT SIDE. REFER TODETAIL 3/-.TELE COMMUNICATIONS/DATA WALL OUTLET. PROVIDE EMPTY J-BOX OR PLASTER RING & 3/4 DIA. EMPTYEMT CONDUIT STUBBED-UP @+/-6" ABOVE SUSP. CLG. W/ PROTECTIVE PLASTIC RING & PULL STRING/TENANT'S VENDOR TO PROVIDE COVER PLATES AND PLENUM RATED CABLES. VERIFY SIZE OF CONDUIT WITHCABLING/PHONE VENDOR OR WHEN FEEDING MORE THAN (1) LOCATION.

WALL MOUNTED DUPLEX ELECTRICAL OUTLET, SEPARATE CIRCUIT. SEE ENGINEER'S DRAWINGS FOR CONDUITSIZE.WALL POWER IN-FEED JUNCTION BOX FOR WORKSTATIONS POWER AND TELEPHONE/DATA. VERIFYPOWER REQUIREMENTS WITH THE FURNITURE VENDER AND THE ELECTRICAL DRAWINGS FOR THENUMBER OF CIRCUITS TO BE PROVIDED. AT DATA/PHONE PROVIDE A DOUBLE GANG TELEPHONE BOXWITH SINGLE GANG MUD RING. PROVIDE 1-1/2" CONDUIT WITH PULL STRING AND STUB-UP AT +6"ABOVE THE CEILING WITH A SUPER FLEX CONDUIT, UNLESS OTHERWISE NOTED ON PLAN. EXACTLOCATIONS & POWER REQUIREMENTS TO BE DETERMINED BY TENANT'S FURNITURE VENDOR.K WHERE PLUS HEIGHT IS INDICATED, HEIGHT IF NOT STANDARD.REFER TO TYPICAL SHEET NOTE A-0.1 FOR MOUNTING HEIGHT INFORMATION.TYPICALNOTE:

POWER/ VOICE/ DATA LEGEND
INDICATES NEW OUTLET.NINDICATES GROUND FAULT INTERRUPTER.G.F.I.

FLUSH FLOOR MOUNTED FIRE RATED JUNCTION BOX, TELE/DATA AND DUPLEX OUTLET. VERIFY CONDUITSIZE FOR DATA/TELE REQUIREMENTS. COORDINATE LOCATION W/ TENANT AND FURNITURE CONTRACTORREQUIREMENTS.FLUSH FLOOR MOUNTED RATED JUNCTION BOX POWER AND TELEPHONE DATA IN-FEED FOR WORKSTATIONSTO UNLESS OTHERWISE NOTED. VERIFY POWER REQUIREMENTS WITH THE FURNITURE VENDOR AND THEELECTRICAL DRAWINGS FOR THE NUMBER OF CIRCUITS TO BE PROVIDED. AT TELEPHONE DATA PROVIDE A1-1/2" CONDUIT FROM FLOOR BOX BACK TO AN ACCESSIBLE CEILING ON THE TENANTS FLOOR. EXACTLOCATION AND POWER REQUIREMENTS TO BE DETERMINED BY TENANT'S FURNITURE VENDOR.

INDICATES EXISTING BLANK PLATED J-BOX. CAN BE CONVERTED TO A TELE/DATA OUTLET.BNEW WALL MOUNTED JUNCTION BOX. PLUS HEIGHT INDICATES HEIGHT IF NOT STANDARD. PROVIDE A SINGLE 20AMP CIRCUIT FOR HARDWARE CONNECTION OF EQUIPMENT. ELECT. SUB-CONTRACTOR IS TO CONNECT DEVICE.J WALL MOUNTED QUADPLEX ELECTRICAL OUTLET. SEE ENGINEER'S DRAWINGS FOR CONDUIT SIZE.

WALL MOUNTED MAGNETIC HOLD OPEN. MOUNT 10" FROM TOP OF DOOR.H

3.1ALL POWER RECEPTACLES WITHIN 6'-0" OF SINK SHALL BE GFI.3.2PROVIDE SEPARATE CIRCUIT FOR TENANTS COPIER, (N.I.C.) VERIFY ELECTRICAL REQUIREMENTS AND PLUG TYPE.KONICA BIZHUB 558 OR BIZHUB C458, 120 V, 16AMP. VERIFY AND PROVIDE RIGHT PLUG TYPE WITH TENANT.3.3PROVIDE SEPARATE CIRCUIT CONFIGURATION FOR REFRIGERATOR. VERIFY ELECTRICAL REQUIREMENTS.REFER TO SHEET A-0.3 FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.3.5PROVIDE POWER FOR UNDER COUNTER GARBAGE DISPOSAL WITH ON/OFF SWITCH AT +44" A.F.F.VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION.3.6PROVIDE SEPARATE CIRCUIT @ +44" A.F.F. FOR TENANT'S COFFEE MAKER, N.I.C. VERIFY ELECTRICALREQUIREMENTS.3.7PROVIDE SEPARATE CIRCUIT FOR MICROWAVE OVEN. REFER TO ELEVATION FOR EXACT MOUNTINGHEIGHT. VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION.CONTRACTOR TO PROVIDE AND INSTALL.3.8PROVIDE SEPARATE CIRCUIT CONFIGURATION FOR UNDERCOUNTER REFRIGERATOR. VERIFY ELECTRICALREQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.3.93.10GC TO COORDINATE EXACT LOCATION OF POWER AND DATA FLOOR CORES WITH TENANT'SFURNITURE VENDOR. COORDINATE WITH BUILDING ENGINEER PRIOR TO CORING.3.11PROVIDE 2" CONDUIT FROM POWER/VOICE/DATA FLOOR OUTLET TO ADJACENT WALL OUTLET FOR TENANT'S T.V. 3.123.13PROVIDE POWER FOR AUTOMATIC FAUCET. SEE ELECTRICAL DRAWINGS FOR MORE INFORMATION.3.163.17PROVIDE POWER AS REQUIRED FOR AUTOMATIC PAPER TOWEL DISPENSER. SEE SHEET A-0.7A FORSPECIFICATIONS AND ELECTRICAL ENGINEER'S DRAWINGS FOR MORE INFORMATION.3.18PROVIDE RECESSED DUPLEX AND TELE/DATA OUTLETS FOR WALL MOUNT TV. EXACT LOCATION ANDMOUNTING HEIGHT TO BE VERIFIED IN FIELD. PROVIDE BACKING IN WALL IF REQUIRED, VERIFYREQUIREMENTS.3.19ALL COVER PLATES & DEVICES TO BE BUILDING STANDARD WHITE. PROVIDE COST TO REPLACETHROUGHOUT AREA OF WORK AS REQUIRED AND ADJUST TO COMPLIANT HEIGHT AS REQUIRED.QUANTITIES TO BE VERIFIED IN FIELD.3.20PROVIDE POWER AS REQUIRED FOR AUTO FLUSHER AT WATER CLOSET. SEE SHEET A-0.7A FORSPECIFICATIONS AND ELECTRICAL DRAWINGS FOR MORE INFORMATION.

3.143.15PROVIDE POWER FOR BOTTLE FILLER, REFER TO A-0.3 FOR SPECIFICATIONS, MOUNTING HEIGHT FORACCESSIBILITY. CONTRACTOR TO PROVIDE AND INSTALL.

POWER/ VOICE/ DATA KEYNOTES
NEW ADA COMPLIANT DISHWASHER. VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.

TENANT'S FURNITURE VENDOR TO PROVIDE DIMENSIONS FOR FURNITURE FEEDS AND TO APPROVE LOCATIONSIN FIELD PRIOR TO INSTALLATION.PROVIDE EMERGENCY BUTTON TIED TO TENANT SECURITY SYSTEM AT LOCATIONS INDICATED ONPLANS. REFER TO ENGINEER'S DRAWINGS FOR MORE INFORMATION. PLACE NEXT TO WALL LIGHTSWITCH WHERE APPLICABLE. VERIFY EXACT LOCATION AND REQUIREMENTS WITH TENANT'SSECURITY VENDOR AT ALL OFFICES/RECEPTION DESKS. PULL WIRING THROUGH DATA DROP ANDMOUNT EMERGENCY BUTTON TO FURNITURE/BUILT-IN WORK SURFACE.

3.21PROVIDE POWER AND PLUMBING FOR WASHER/DRYER, REFER TO A-0.3 FOR SPECIFICATIONS.

3.22PROVIDE SEPARATE CIRCUIT OUTLET FOR LOCKABLE REFRIGERATOR. REFER TO A-0.3 FOR SPECIFICATIONS.CONTRACTOR TO PROVIDE AND INSTALL.3.23REFER TO ENGINEERING DRAWINGS FOR PLUMBING REQUIREMENTS AND FIXTURES FOR NEW WATER HEATER CLOSET.3.243.25PROVIDE POWER AND SWITCH FOR MOTORIZED PROJECTION SCREEN. CONTRACTOR TO COORDINATE WITH TENANT'SVENDOR FOR FIXTURE SPECIFICATION, REQUIREMENTS AND EXACT MOUNTING LOCATIONS. 4'-0"
COMMON 4S PULL BOX. PROVIDEA 1" CONDUITBACK TO CONTROLLER3/4" CONDUIT TO ACCESSCONTROLLER READER.3/4" CONDUIT TO ELEC. HINGELOCATIONACCESS CONTROL READER3SCALE:NTSKEYCARD READER CONNECTIONTOP OF BOX DESIGN CRITERIA NOTESSWITCHES AND RECEPTACLES1. ALL SWITCHES AND RECEPTACLES AT P-1 AND/OR WHITE WALLS SHALL BE WHITESCREWLESS, U.O.N. GC TO CONFIRM COLOR FINISH ON ALL SUCH COMPONENTSAT NON-WHITE WALLS WITH ARCHITECT BEFORE PURCHASE AND INSTALLATION.2.ALL RECEPTACLES INSIDE WHITE MILLWORK SHALL BE WHITE SCREWLESS, U.O.N.3. GC SHALL BE RESPONSIBLE FOR CONFIRMING RECEPTACLE TYPES FOR SPECIALEQUIPMENT (SUCH AS COPY MACHINES)WITH CLIENT AND ARCHITECT BEFOREPURCHASE AND INSTALLATION.4. ALL VOICE AND DATA OUTLETS SHALL MATCH POWER OUTLETS AS ABOVE U.O.N.5. ALL DIMMER SWITCHES SHALL MATCH POWER SWITCHES AS ABOVE U.O.N.6. SWITCHES AND RECEPTACLES MAY BE LEVITON DECORA, LUTRON, OR COOPER,U.O.N.7. SUBMIT SAMPLES OF SWITCHES AND PLATES FOR APPROVAL.1F-1REMOVE ALL EXISTING CABLES.MDF ROOM SPECIFIC KEYNOTES1F-2PROVIDE DEDICATED 1 TON A/C UNIT ON A SEPARATE METER.1F-3VERIFY IN FIELD FOR EXACT LOCATION OF NEW OUTLETS WITH TENANT AND TENANT'S IT VENDOR.1F-4PROVIDE FIRE TREATED BACKBOARDS PER NEW LAYOUT.1F-5ALL POWER OUTLETS NEED TO BE ON A DEDICATED SEPARATE CIRCUIT. 4SCALE:NTSMDF/IDF #111 LAYOUT
2SCALE:1/4" = 1'-0"ENLARGED PLAN AT STAFF BREAK ROOM #147 1SCALE:1/4" = 1'-0"ENLARGED PLAN AT CLUBHOUSE #174
4-
2-
1-
POWER/ VOICE/ DATA KEYNOTES CONT.

LOBBY100RECEPTION101 SERVICE CHIEFOFFICE124RESTROOM134
CLIENT RESTROOM173GROUP ROOM 02171CLINICIAN'SOFFICE 01168LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151 STAFFBREAK ROOM147EXITVESTIBULE148 GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136 MULTI PURPOSEOFFICE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149PRIVATEOFFICE167CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114MOTHER'SROOM108MEN'SRESTROOM109MDF/IDF111 GROUP ROOM 04142GROUP ROOM 03140PRIVATE OFFICE116 CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159 INTERNOFFICE 01153 GROUP ROOM 02141
CLINICIAN'SOFFICE 13135LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131TESTINGRESTROOM 02112TESTING OFFICE113VESTIBULE107WOMEN'SRESTROOM110 HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
CLUBHOUSE174
STAFFBREAK ROOM147
CLIA STOR.117
WATER HEATER CLOSET132A

3.18 3.143.253.63.73.33.53.13.13

3.33.73.63.143.253.53.13.133.15
OPEN COLLAB.138A

3.183.21

3.123.12

3.123.123.183.123.183.123.183.123.183.183.103.11

3.2 3.183.123.253.223.13.133.123.123.123.123.12

3.123.123.123.123.12

3.93.123.123.123.12

3.18 3.103.113.183.123.18GROUP ROOM 011723.12

3.19THROUGHOUT U.O.N.3.2 3.93.23.123.123.123.12

3.133.173.203.133.173.203.83.173.133.123.253.13.133.173.133.123.223.12

3.123.123.123.123.123.123.123.123.123.123.123.123.253.53.13.13

3.12 3.173.13

3.13.133.25

3.13.133.25
GC TO COORDINATE EXACT LOCATION OF OUTLETS IN ALL OFFICES WITH TENANT'S FURNITUREVENDOR PRIOR TO ROUGH IN.

3.16 PRIVATE OFFICE144

3.17 3.4PROVIDE POWER FOR NEW WATER HEATER. REFER TO ENGINEERING DRAWINGS.

3.4 3.4 CHART/SUPPLY/STORAGE146CONFERENCE ROOM143
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
211
+10'-0"
+9'-11"+9'-11"
+9'-0"+9'-0"
+8'-1"+9'-0"
+8'-0"
+9'-0"
+9'-0"+9'-0"+9'-0"
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA A-4.0REFLECTED CEILING PLAN1/8" = 1'-0"
REFLECTED CEILING LEGENDREFLECTED CEILING KEYNOTES4.1PROVIDE EXPANSION JOINT EVERY 2500 SQUARE FEET AS REQUIRED THROUGHOUT AREA OF WORK.SEE DETAIL 13/A-30.2.PROVIDE DRYWALL HEADER AT 1" BELOW ADJACENT CEILING. PAINT WHITE, FLAT FINISH.4.2PROVIDE SOUND BOOTS AT RETURN AIR GRILLES AT ALL PRIVATE OFFICES.4.4CENTER CEILING TILE AND GRID IN ROOM AS SHOWN.4.34.5PROVIDE EXHAUST FAN AND DIFFUSERS AS REQUIRED AT INDICATED ROOMS. SEE MECHANICALDRAWINGS FOR MORE INFORMATION.4.6PROVIDE 24/7 1-TON A/C UNIT ON SEPARATE T-STAT. PROVIDE SEPARATE METER AS REQUIRED PERBUILDING STANDARDS.REFER TO ENGINEERING DRAWINGS FOR WASHER/DRYER VENTILATION.4.7NEW FIXTURE TO BE PROVIDED. SEE LIGHT FIXTURE SCHEDULE FOR SPEC.CEILING HEIGHT AS INDICATED.+X'-X" AREA NOT IN CONTRACT (N.I.C.)EXISTING 2X4 CEILING GRID IS TO REMAIN. THE G.C. IS TO PROVIDE NEW BUILDING STANDARDCEILING TILES THROUGHOUT, U.O.N.NEW 2x4 CEILING SYSTEMCEILING GRIDMANUFACTURER:TO MATCH EXISTINGSIZE:TO MATCH EXISTINGSERIES:TO MATCH EXISTINGCOLOR:TO MATCH EXISTINGCEILING TILEMANUFACTURER:ARMSTRONGSERIES:DUNE SECOND LOOKSIZE:2X4COLOR:WHITEREFERENCE SHEET A-30.2 FOR SPECIFICATIONS AND REQUIREMENTS.EXISTING DRYWALL CEILING TO REMAIN.INDICATES EXISTING TO REMAIN.ECEILING MOUNTED EXIT SIGN. DARK QUADRANT INDICATES FACE. ARROW(S) INDICATEDIRECTION.NEW DRYWALL CEILING.4.9PROVIDE AB SWITCHING TO CONTROL LIGHT FIXTURES SEPARATELY4.10PROVIDE SOUND BLANKET OVER CEILING ABOVE FOR ADDITIONAL SOUND ATTENUATION.4.12PROVIDE CODE REQUIRED DDC CONTROL UPGRADES THROUGHOUT. REFER TO ENGINEERING DRAWINGS.4.13REWORK EXISTING HVAC, SWITCHING AND CIRCUITING AS REQUIRED AND REBALANCE THROUGHOUT.4.11REWORK EXISTING FIRE SPRINKLERS AS REQUIRED PER NEW LAYOUT. ALL FIRE SPRINKLER HEAD TRIMS TOBE BUILDING STANDARD.4.8PROVIDE NEW CEILING TILES AND HVAC GRILLES THROUGHOUT. PROVIDE WALL ANGLE WHERE OCCURS,PROVIDE 7/8" SHADOW MOLDING TYPICAL THROUGHOUT.

DESIGN CRITERIA NOTESFIRE AND LIFE SAFETY COMPONENTS1. ALL COMPONENTS SHALL BE WHITE U.O.N.2. FIRE PULL COMPONENTS SHALL BE RED OR OTHER OTHER ACCORDING TO LOCAL JURISDICTION.3. ALL STROBES SHALL BE CEILING MOUNTED, U.O.N. MOUNT IN CENTER OF ACOUSTIC CEILING TILES WHEREOCCURS, U.O.N.4. ALL SPEAKERS SHALL BE FULLY RECESSED CEILING MOUNTED, U.O.N. MOUNT IN CENTER OF ACOUSTICCEILING TILES WHERE OCCURS, U.O.N.5. COMPONENTS SHALL BE MOUNTED WITH CONSISTENT CENTERLINE, U.O.N.GENERAL1. PROVIDE AND INSTALL PERFORATED CEILING GRILLE PANELS AT ALL ACOUSTIC CEILING MOUNTED SUPPLYAND RETURN LOCATIONS, U.O.N. CONFIRM COLOR OF GRILLE WITH ARCHITECT BEFORE PURCHASE ANDINSTALLATION.

LIGHT FIXTURE SCHEDULEMARKSYMBOLFIXTURE TYPEMANUFACTURERCATALOG NUMBERCOLORTEMPREMARKSPROVIDE FOR T-24 COMPLIANCE. SEE ENG. DRAWINGS.3500KTRAVERSE TR242X4 ARCHITECTURAL RECESSEDPINNACLE ARCHITECTURAL LIGHTING2'X4' LEDDIRECT/INDIRECTLF-2LF-12'X2' LEDDIRECT/INDIRECTPINNACLE ARCHITECTURAL LIGHTING3500KTRAVERSE TR222X2 ARCHITECTURAL RECESSEDPROVIDE FOR T-24 COMPLIANCE. SEE ENG. DRAWINGS.CEILING MOUNTEDEXIT SIGNLF-XEDGE LIT LEDLITHONIA LIGHTING3500KLITHONIA LIGHTING: EDGR SERIES –GREEN LETTERSCLEAR FACE WITH GREEN LETTERS 4" DIA. RECESSED LEDDOWNLIGHTLF-3LITHONIA LIGHTING3500KLDN4 STATIC WHITE4" OPEN AND WALL WASH LEDPROVIDE FOR T-24 COMPLIANCE. SEE ENG. DRAWINGS.1'X2' LED SURFACE MOUNTLF-4LITHONIA LIGHTING3500KBLWP2-40L-ADP-MVOLT-GZ1-LP835INPUT WATTS: 37WPROVIDE FOR T-24 COMPLIANCE. SEE ENG. DRAWINGS.UNDER CABINET STRIP LEDLIGHT FIXTURELF-5CALIFORNIA ACCENT LIGHTING3500KLLED8200-UCTO COMPLY WITH TITLE 24 REQUIREMENTS. SEE ENGINEER DRAWINGSFOR MORE INFORMATION. PROVIDE SEPARATE SWITCH.

N
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1 LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1 LF-1LF-1LF-1LF-1 LF-1LF-1
LF-1
LF-2LF-2LF-2LF-2LF-1LF-1
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2 10A-0.714A-0.76A-0.7
18A-0.7LOBBY100 RECEPTION101 SERVICE CHIEFOFFICE124RESTROOM134 CLIENT RESTROOM173
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151STAFFBREAK ROOM147EXITVESTIBULE148 GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136 MULTI PURPOSEOFFICE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149PRIVATE OFFICE167
CLUBHOUSE174SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114MOTHER'S ROOM108 MEN'SRESTROOM109
MDF/IDF111
GROUP ROOM 04142GROUP ROOM 03140PRIVATE OFFICE116CLIA STOR.117 CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164 CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162
CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159 INTERNOFFICE 01153 GROUP ROOM 02141
CLINICIAN'SOFFICE 13135LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131TESTINGRESTROOM 02112TESTING OFFICE113VESTIBULE107WOMEN'SRESTROOM110 HALLWAY106 HALLWAY119
HALLWAY138
HALLWAY150LF-1LF-1LF-1LF-1LF-1
FOR ALL LIGHT FIXTURE SPECIFICATION:CONTACT : BRENDA LOWELL, SPECIFICATION SALES, MOBILE: (949) 636-5559, [email protected], PERFORMANCELTG.COM

4.44.10LF-XNLF-1LF-14.44.10LF-1LF-14.44.10
LF-1LF-1LF-1LF-1LF-1LF-1LF-4

4.14REPLACE EXISTING EXHAUST FAN WITH NEW.

4.144.54.7LF-1LF-1
WATER HEATER CLOSET132A
LF-4CLCLEQ.EQ.EQ.EQ.4.44.10LF-XN
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-XNLF-2

4.44.104.44.104.44.104.44.104.44.10LF-XNLF-XNLF-XNLF-2LF-XNLF-2-A-30.24.2

4.44.5 4.44.104.44.104.44.104.44.104.44.104.44.104.44.10 LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-XN4.14.124.134.114.8THROUGHOUTU.O.N.LF-2LF-XN LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-14.44.104.44.104.44.10

4.5LF-14.34.3LF-1LF-1LF-1LF-14.34.6LF-1LF-1LF-1LF-1LF-1LF-14.3

4.34.4LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-54.3EQ.EQ.

EQ.EQ.LF-XNLF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2

LF-XNLF-XN
LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1
LF-XN 4.44.104.44.104.44.104.44.104.44.104.44.104.44.104.44.104.44.104.44.10

4.44.104.44.10LF-XN
LF-XN
LF-XN LF-XN4.44.104.44.104.44.10LF-1LF-1LF-1LF-1LF-1LF-1LF-14.44.10 CLCLCLEQ.EQ.EQ.EQ.EQ.EQ.EQ.EQ.EQ.EQ.LF-4LF-4LF-4LF-XN OPEN COLLAB.138A LF-5LF-XN LF-XN
LF-XN
LF-3LF-3LF-1LF-3LF-3LF-2LF-2LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3 LF-1LF-1LF-1LF-1LF-1LF-1LF-2LF-2LF-2LF-2LF-2EQ.EQ.4'-0"

4.15PAINT DRYWALL CEILING P-1 FLAT, U.O.N.

4.154.154.54.157A-0.7B 4.154.15

4.154.15

4.15 4.15
PRIVATE OFFICE144
CHART/SUPPLY/STORAGE146CONFERENCE ROOM143
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
212
FINISH PLANA-5.0
1/8" = 1'-0"
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA

N FINISH LEGENDWALL FINISHTYPE OF FINISHFINISH NUMBERSPECIAL FINISHTYPE OF FINISHFINISH NUMBERXXXXXXXX

PATTERN DIRECTION

FINISH SCHEDULEFLOOR BASETYPE OF FINISHFINISH NUMBERFLOOR FINISHTYPE OF FINISHFINISH NUMBERXXXXXXXXFLOOR TRANSITION

1.ALL PAINTED WALL SURFACES TO BE P-1, EGGSHELL FINISH, UNLESS OTHERWISE NOTED.2.PROVIDE FLOOR BASE AT ALL WALLS. STRAIGHT AT CARPET COVE AT VCT. ALL FLOOR BASE IS TO BE CONTINUOUSROLLS, U.O.N..3.ALL PAINT GRADE WOOD TO BE P-1, SEMI-GLOSS FINISH, UNLESS OTHERWISE NOTED.4.PAINT ALL GYPSUM BOARD CEILING, UNLESS OTHERWISE NOTED. SEE FINISH SCHEDULE FOR SPECIFICATIONS.5.REDUCERS AND TRIM AT TRANSITIONS TO MATCH ADJACENT CARPET COLOR. GC TO COORDINATE WITHARCHITECT FOR CLARIFICATION BEFORE PURCHASE.6.GLUE TO BE QUICK RELEASE IN NATURE U.N.O.FINISH SHEET NOTESC1P2 SDT1 LVT1PL1SS1P211A-0.715A-0.77A-0.7
19A-0.7

5.15.1PL2SS1
PL1SS1 C3 5.25.2LVT1P1B1THROUGHOUT, U.O.N.P1B1LVT1THROUGHOUT, U.O.N.VCT1 PL1SS1BS1
VCT1
VCT1
C1P25.2 C1P25.2P25.2C1P2P2C15.25.2P2 C1
P2C15.25.2C1P2C1P25.25.2P25.2P2P2 P2C1P2C1P2C1 5.25.2

5.2P1B1LVT1THROUGHOUT,U.O.N.

P1B1LVT1THROUGHOUT, U.O.N.

P25.25.2P2P2P2C1P2P2P2P2P2P2P2 5.25.25.2 5.25.2 P2P25.2P25.2C1C1C1 LOBBY100RECEPTION101 SERVICE CHIEFOFFICE124RESTROOM134
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151STAFFBREAK ROOM147EXITVESTIBULE148CHART/SUPPLY/STORAGE146 GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136 MULTI PURPOSEOFFICE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149PRIVATEOFFICE167
CLUBHOUSE174SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118 STORAGE115TESTINGRESTROOM 01114MOTHER'SROOM108
MEN'SRESTROOM109MDF/IDF111 GROUP ROOM 04142GROUP ROOM 03140PRIVATE OFFICE116 CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159 INTERNOFFICE 01153 GROUP ROOM 02141
CLINICIAN'SOFFICE 13135LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131TESTINGRESTROOM 02112TESTING OFFICE113VESTIBULE107WOMEN'SRESTROOM110HALLWAY106 HALLWAY119 HALLWAY138
HALLWAY150
C1C1C1C1 C1C1C1C1C1C1
C1C1C1
C1
C1P2C1C1P2
P3 5.2
FRP1

5.2 OPEN COLLAB.138A
CLIA STOR.117
WATER HEATER CLOSET132A
FRP1
C2C2C2C2
LVT1PL2SS1FRP1
P1B1LVT1LVT1PL1SS1
LVT1PL1PL2BS1 VCT1LVT1
C2
LVT1VCT1
LVT1C2C25.2

5.1 5.25.2 5.25.2P1B1LVT1THROUGHOUT, U.O.N.CLIENTRESTROOM173C2

5.35.411A-0.7B
P35.6

5.6 5.6

5.6 5.6

5.65.6 P3C3

5.5 LVT1 PL2SS1PL1PL1
PRIVATE OFFICE144CONFERENCE ROOM1435.2PL2SS1PL1P3 P3P3 P3P3 P1P1

5.5PL1P1LVT1PL2SS1PL1 P2
P2
PL2 PL2
PL2SS1PL1
SS1

5.6 P1P1 P1B1LVT1
P1P1
:FIELD PAINT:REFER TO PLANS:DUNN EDWARDS:WARM WHITE DEW380:EGGSHELL TYPICAL, FLAT AT CEILING:2 COATS MINIMUM:KIM HAMPTON ([email protected]):PLASTIC LAMINATE:MILLWORK-VERTICAL SURFACES-LOWER CABINET-REFER TO PLANS:FORMICA:GRAYSTONE 00464-58:MATTE:EMILY DUBAN, 949-301-7535, emily.duban@formica.comITEMLOCATIONMANUFACTURERCOLORFINISHCONTACT

ITEMLOCATIONMANUFACTURERCOLORFINISHINSTALLATIONCONTACT
:SOLID SURFACE:MILLWORK-HORIZONTAL SURFACES:VADARA:PHANTOM TRAIL V814:STUART AYERS, [email protected], 844-482-3272ITEMLOCATIONMANUFACTURERCOLORCONTACT P1
PL1
SS1:LUXURY VINYL TILE:REFER TO PLANS:MILLIKEN:MAGIC HOUR:HORIZON:EXPOSURE HZN 144:10" x 60":PER MANUFACTURER'S SPECS:B-1:BECCA DOBBS, 310-504-4635, Becca.Dobbs@Milliken.comITEMLOCATIONMANUFACTURERCOLLECTIONSTYLECOLORSIZEINSTALLATIONBASECONTACT :WALL BASE:REFER TO PLANS:BURKE:ESPRESSO 103:4"; CONTINUOUS ROLLS:STRAIGHT AT CARPET, COVED AT HARD FLOORS:JULIE KAESER ([email protected])ITEMLOCATIONMANUFACTURERCOLORSIZEINSTALLATIONCONTACTLVT1 B1ITEMLOCATIONMANUFACTURERCOLLECTIONSTYLECOLORSIZEINSTALLATIONBASECONTACT:CARPET:REFER TO PLANS:INTERFACE:PERFECT PITCH:DIMINUENDO:MICA 106698:10" x 40":ASHLAR:B-1:BLAIR SHARPE ([email protected])C1:ACCENT PAINT:REFER TO PLANS:SHERWIN WILLIAMS:MINDFUL GRAY SW7016:EGGSHELL:2 COATS MINIMUM:ROCKY M BERLANGA ([email protected])ITEMLOCATIONMANUFACTURERCOLORFINISHINSTALLATIONCONTACTP2 ITEMLOCATIONMANUFACTURERCOLLECTIONSTYLECOLORSIZEINSTALLATIONBASECONTACT:CARPET:REFER TO PLANS:INTERFACE:OPEN AIR:OPEN AIR 401:NATURAL 106776:10" x 40":ASHLAR:B-1:BLAIR SHARPE ([email protected])C2 :VINYL COMPOSITION TILE:REFER TO PLANS:TARKETT:VCT II:DUNES CB 326:12"X12":PER MANUFACTURER SPECS:B-1:JILL O'KELLY Jill.Okelly@tarkett.comITEMLOCATIONMANUFACTURERSTYLECOLORSIZEINSTALLATIONBASECONTACTVCT1 FT1
:BACKSPLASH MOSAIC TILE:REFER TO PLANS:ANN SACKS:SAVOY ROBBED FIELD:LANTERN:POLISHED:1.85"X 7.75":STACKED, FULL TILE START CENTERED TO SINK:CUSTOM BUILDING PRODUCTS: FUSION PRO SINGLE COMPONENT GROUT #370 DOVE GRAY:JULIE BANKER, [email protected], 949-831-3333ITEMLOCATIONMANUFACTURERCOLLECTIONCOLORFINISHSIZEINSTALLGROUTCONTACTBS1 P3ITEMLOCATIONMANUFACTURERCOLORFINISHINSTALLATIONCONTACT:ACCENT PAINT:REFER TO PLANS:DUNN EDWARDS:LONG LAKE DE633:EGGSHELL:2 COATS MINIMUM:KIM HAMPTON ([email protected]) :STATIC DISSIPATIVE TILE:REFER TO PLANS:ROPPE STATDEFEND:NEUTRON GRAY #701:12"X12":B-1:PER MANUFACTURER SPECS:PAUL SHAIA ([email protected])ITEMLOCATIONMANUFACTURERCOLORSIZEBASEINSTALLATIONCONTACTSDT1 P4ITEMLOCATIONMANUFACTURERCOLORFINISHINSTALLATIONCONTACT:ACCENT PAINT (RESTROOMS):REFER TO PLANS:DUNN EDWARDS:WARM WHITE DEW380:SEMI-GLOSS TYPICAL, FLAT AT CEILING:2 COATS MINIMUM:KIM HAMPTON ([email protected])ITEMLOCATIONMANUFACTURERCOLLECTIONSTYLECOLORSIZEINSTALLATIONBASECONTACT:CARPET:REFER TO PLANS:INTERFACE:RISING SIGNS:PLAY THE ANGLE:CARBON 107191:10" x 40":ASHLAR:B-2:BLAIR SHARPE ([email protected])C3 :PLASTIC LAMINATE:MILLWORK-VERTICAL SURFACES-UPPER CABINET-REFER TO PLANS:WILSONART:PHANTOM PEARL 8211k-28:GLOSS LINE FINISH:NANCY STUCKI ([email protected])ITEMLOCATIONMANUFACTURERCOLORFINISHCONTACTPL2FINISH KEYNOTES5.1PROVIDE METAL TRANSITION STRIP BETWEEN CARPET AND HARD SURFACE FLOOR.5.2PROVIDE BEVELED STONE THRESHOLD, DALTILE, COLOR: CARRARA WHITE MARBLE M701-POLISHED. SEE DETAIL17/A-30.0.PROVIDE 48" HIGH WINDOW FILM BANDING AT ALL WOOD DOOR WITH GLASS INSET THROUGHOUT, U.O.N.5.3PROVIDE NEW ROLLER SHADE AT EXTERIOR WINDOWS THROUGHOUT.SPEC: SOLE EFFECT, PHIFER, MANUAL REGULAR ROLL WITH INSIDE MOUNT WITH FASCIAFABRIC: PHIFER SHEERWEAVE 7000 BLACK OUT, COLOR: TBDFASCIA: CLEAR ANODIZED ALUMINUM TO MATCH EXISTING MULLION.NOTE 1: PROVIDE ALTERNATE PRICING FOR INSIDE MOUNT SIDE CHANNEL.NOTE 2: PROVIDE SEPARATE SHADE AT LOWER AND UPPER WINDOWS WHERE FULL HEIGHT EXTERIORGLAZING OCCURS. VERIFY IN FIELD, PROVIDE SHOP DRAWINGS FOR APPROVAL.CONTACT: SEAN WISNER, SOLEEFFECT, 949-358-5500, [email protected] RAW CONCRETE FLOOR WITH COVED BASED AND FRP BOARD ABOVE IN JANITOR'S CLOSET. PROVIDEBEVELED STONE THRESHOLD AT FLOOR TRANSITION.5.5EXISTING THRESHOLD TO REMAIN. CONFIRM EXISTING CONDITION AND REPLACE AS REQUIRED. PROVIDE WEATHERSTRIP AT ALL EXTERIOR DOORS. REFER TO DETAIL #18/A-30.05.6:FIBERGLASS REINFORCED PLASTIC:REFER TO PLANS:MARLITE:INDURO FRP:FASHION GREY 381:FULL HEIGHT:DAN EGBERS, 800-377-1221, degbers@marlite.comITEMLOCATIONMANUFACTURERSTYLECOLORSIZECONTACTFRP1 :WALL TILE:RESTROOMS:EMSER TILE:CATCH:ICE:4X16:CUSTOM BUILDING PRODUCTS PRO FUSION #640 ARCTIC WHITE:6'-6" AFF WITH TRANSITION STRIP AT TOP:JUAN CAMARILLO, [email protected], 323-854-8894ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEGROUTNOTECONTACTWT1:WALL TILE - AT SINGLE RESTROOMS:RESTROOMS:EMSER TILE:CATCH:ICE:4X10:CUSTOM BUILDING PRODUCTS PRO FUSION #640 ARCTIC WHITE:6'-6" AFF WITH TRANSITION STRIP AT TOP:JUAN CAMARILLO, [email protected], 323-854-8894ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEGROUTNOTECONTACTWT2 THROUGHOUT, U.O.N.
:FLOOR TILE:RESTROOMS:DALTILE MARAZZI:SOCIETY PARK LANE GRAY:SO47:12X24: MATTE:#542 GRAY STONE:PER MANUFACTURER SPECS - STAGGERED INSTALLATION, OVERLAP SHOULD NOTEXCEED 3%:PROVIDE 4" BASE CUT IN FIELD AT WATER HEATER CLOSET AND WASHER/DRYER1/8" GROUT LINE THICKNESS MAX. PER MANUFACTURER SPEC.ITEMLOCATIONMANUFACTURERSTYLECOLORSIZEFINISHGROUTINSTALLATIONNOTE :PLASTIC LAMINATE:REFER TO PLANS - RESTROOMS:FORMICA:STAINLESS ALUMINUM M4194-99:EMILY DUBAN, [email protected], 949-301-7535ITEMLOCATIONMANUFACTURERCOLORFINISHPL3 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
213
2'-10"2'-2"9'-11"3'-0"4"20.120.220.3
6A-30.53A-30.5
1A-30.510 EQ. SPACES AT 16" MAX.
4 EQ. SPACES AT 15" MAX.2'-0"TRASH/RECYCLESS1SOFFITPL2
PL1
2'-10"2'-2"9'-11"3'-0"4"20.120.220.38 EQ. SPACES AT 16" MAX. 8 EQ. SPACES AT 16" MAX.
1A-30.5SOFFITPL2SS1PL13A-30.5
2'-10"2'-2"9'-11"3'-0"4"4"2'-6"1'-1"2'-0"TRASH/RECYCLE20.1020.86A-30.520- 3'-5"5A-30.54A-30.5 SOFFITPL2SS1PL1
7 EQ. SPACES AT 15" MAX.

20.73'-4"20.1520.120.1420.320.420.52'-7"
19- BS1
1'-3"SCRIBE TO CEILING WITH 3/4" REVEALFACE OF WALLPLASTIC LAMINATE SOFFIT1/4" MELAMINE BACK PANELFINISHED FRONT FACE, FACE FRAME EDGESAND EXPOSED SIDES3/4" MELAMINE SHELF WITH CHROME SHELFPINS IN 5MM HOLES AT 1-1/4" O.C.MELAMINE CABINET INTERIORPROVIDE CONTINUOUS METAL BACKINGBEHIND DRYWALLEUROPEAN HINGES, TYP. (BLUM, MEPLA ORSOSS)DOOR PULL AS SPECIFIED. 2"SEE ELEVATIONSTRIP CABINET LIGHTING REFER REFLECTEDCEILING LEGEND FOR SPEC. CONTRACTORTO VERIFY LENGTHS IN FIELD 2'-10"2'-2"9'-11"3'-0"4"4"20.720.720.820.82'-6"
2 EQ. SPACESAT 14" MAX.18A-30.5PL1
PL120.103'-4"20.92'-0"2'-0"TRASH/RECYCLE1'-6"3'-5"20.420.5 SOFFITPL2SS1PL1BS16 EQ. SPACES AT 16" MAX.4A-30.56A-30.520A-30.55A-30.55'-11"20.152A-30.5 12 EQ. SPACES AT 17" MAX.19-20.120.1420.3
3'-6"
2'-10"4"3"
2'-10"2'-2"9'-11"3'-0"4" ELEVATION BELEVATION AELEVATION C2'-0"TRASH/RECYCLE 2'-10"2'-2"9'-11"3'-0"4"1'-6"3 EQ. SPACES AT 16" MAX.

SOFFIT8 EQ. SPACES AT 14" MAX.
6A-30.54A-30.52A-30.5
1A-30.5PL2
PL1SS1 20.120.220.3
2A-30.5PL1SS12 EQ. SPACESAT 14" MAX.SS120.1320.13 SS120.1320.132'-10"4'-0"9'-11" 4'-0"6"
4"2'-6"20.1220.1120.12 20.1213A-30.513A-30.5
4 EQ. SPACES AT 38" MAX.4 EQ. SPACES AT 38" MAX.6"
3'-4"4'-0"6'-0"

MELAMINE CABINET INTERIOR
REFER TO ELEVATIONSFINISHED COUNTERTOP OVER 3/4" SUBSTRATECOUNTERTOP WITH 1-1/2" FINISHED EDGE1/4" MELAMINE BACK PANELMELAMINE INTERIORDRAWER PULL AS SPECIFIEDTOE KICK TO MATCH FINISHED FACEFINISHED FRONT FACE, FACE FRAME EDGES ANDEXPOSED SIDES REFER TO ELEVATION FOR BACKSPLASHMICROWAVESEE SPECIFCATIONS2-1/2"4"REFER TOELEVATIONS2'-0"MAX. 2'-10"9'-11"4"4"UCRSS12'-0"20A-30.53 EQ. SPACES AT 13" MAX.PL13A-30.520.43'-5"5A-30.5 2'-10"2'-2"9'-11"3'-0"4"2'-0"TRASH/RECYCLE6A-30.53'-0"11"5A-30.52A-30.5 1A-30.54 EQ. SPACES AT 18" MAX.

20.420.120.220.3PL2SS1PL120.163'-4"
4"3'-4"2'-0"TRASH/RECYCLE3'-5"1'-6"
2'-10"2'-2"9'-11"3'-0"4"4"5 EQ. SPACES AT 15" MAX.2A-30.54A-30.56A-30.55A-30.520.4SS1PL1 SOFFITPL210 EQ. SPACES AT 16" MAX.1A-30.520.120.220.320.16 13'-2"
2'-10"2'-2"9'-11"3'-0"4"4"
SOFFITPL2SS1PL1

20.120.220.3
2'-0"TRASH/RECYCLE6A-30.53'-5"7"
6 EQ. SPACES AT 16" MAX.1A-30.5

20.420.55A-30.5
3'-4"
2'-10"2'-2"9'-11"3'-0"4"4"2'-0"TRASH/RECYCLE6A-30.53'-0"11"5A-30.52A-30.5 1A-30.54 EQ. SPACES AT 18" MAX.
4'-0"20.420.120.220.3PL2SS1PL120.16
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA INTERIOR ELEVATIONS ANDMILLWORK DETAILSA-20.0

AS NOTED
KEYNOTES1.FOR FINISHES REFERENCED ON ELEVATIONS, REFER TO SHEET A-5.0 FINISH SCHEDULE.2.REFERENCE MILLWORK NOTES ON SHEET A-30.5 FOR SPECIFICATIONS AND GENERAL REQUIREMENTS.3.PLASTIC LAMINATE WOOD GRAIN TO RUN VERTICAL, TOE KICK TO MATCH LOWER CABINET FINISH.GENERAL NOTES20.1ADJUSTABLE SHELVING, TYPICAL WHERE SYMBOL OCCURS OR REFERENCED IN DETAIL, SEE ELEVATION FOR QUANTITY.BUILDING STANDARD MILLWORK PULLS, TYPICAL WHERE SYMBOL OCCURS. SEE ELEVATIONS FOR QUANTITY.PROVIDE WALL BACKING AS REQUIRED FOR UPPER CABINET. SEE DETAIL 12/A-30.5.NEW SINK AND LEVER FAUCET, SEE SHEET A-0.3 FOR SPECIFICATIONS.GARBAGE DISPOSAL, SEE EQUIPMENT LEGEND ON SHEET A-0.3 FOR SPECIFICATIONS.INSTANTANEOUS WATER HEATER.REFRIGERATOR. REFERENCE SHEET A-0.3 FOR SPECIFICATIONS.MICROWAVE. REFERENCE SHEET A-0.3 FOR SPECIFICATIONS.DISHWASHER. REFERENCE SHEET A-0.3 FOR SPECIFICATIONS.20.220.320.420.520.620.720.820.9BOTTLE FILLER. REFERENCE SHEET A-0.3 FOR SPECIFICATIONS.20.10PROVIDE GROMMETS IN WORKSURFACE AS REQUIRED. COORDINATE WITH TENANT FOR QUANTITY ANDEXACT LOCATION.PROVIDE IN WALL METAL SUPPORT/BRACKET AS REQUIRED. METAL BRACKET SPEC AND SPACING PER MILLWORKER.PROVIDE SHATTER PROOF GLASS WINDOW WITH TWO WAY SPEAKER.20.1120.1220.13PROVIDE TAB PULL BY DOUG MOCKETT, DP3 4" SATIN CHROME.20.14UNDER CABINET LIGHT. REFER TO REFLECTED CEILING PLANS FOR SPECIFICATIONS.20.15PROVIDE ALL MILLWORK LOCKS AND SAFETY LATCHES AT ALL MILLWORK CABINET DOORS. ALL THE LOCKS TO BE KEYED THESAME FOR EACH INDIVIDUAL ROOM, U.O.N.20.16 1 ELEVATIONS AT RECEPTION #1013/8" = 1'-0"SCALE
2 ELEVATION AT MOTHER'S ROOM #1083/8" = 1'-0"SCALE
3 ELEVATION AT TESTING OFFICE #1133/8" = 1'-0"SCALE
6 ELEVATION AT PRIVATE OFFICE #1443/8" = 1'-0"SCALE
7 ELEVATION AT MULTI PURPOSE OFFICE #1323/8" = 1'-0"SCALE 10ELEVATION AT STAFF BREAK ROOM #1473/8" = 1'-0"SCALE
12ELEVATION AT PRIVATE OFFICE #1673/8" = 1'-0"SCALE
18SCALE
11ELEVATION AT STORAGE #1153/8" = 1'-0"SCALE
16ELEVATION AT CLUBHOUSE #1743/8" = 1'-0"SCALE
19SCALE
20SCALE
17SCALE
1"=1'-0"BASE CABINET W/ MICROWAVE
1"=1'-0"UPPER CABINET / DOOR

SPECIFYNOT USED
15ELEVATION AT COPY ROOM #1183/8" = 1'-0"SCALE

SPECIFYNOT USED
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
214
Hilti Firestop Systems
Hilti Firestop Systems
System No. W-L-3282
SECTION A-AWL 3282
Page: 1 of 2

1. Wall Assembly — The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner described inthe individual U300, U400, V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the followingconstruction features:A. Studs — Wall framing shall consist of either wood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm)lumber spaced max 16 in. (406 mm) OC. Steel studs to be min 3-1/2 in. (89 mm) wide and spaced max 24 in. (610 mm) OC.B. Gypsum Board* — 5/8 in. (16 mm) thick, 4 ft (1.22 m) wide with square or tapered edges. The gypsum board type, thickness, number oflayers, fastener type and sheet orientation shall be as specified in the individual U300, U400, V400 or W400 Series Designs in the UL FireResistance Directory.The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed.2. Firestop Device* — Sleeve — Smooth steel sleeve device incorporating flat washers secured by sliding compression couplers. Device shall beinstalled in accordance with the accompanying installation instructions. Device provided in nom 2 in. and 4 in. (51 and 102 mm) diam sizes. Maxdiam of opening in wall for nom 2 in. and 4 in. (51 and 102 mm) diam device is 2-7/16 in. and 4-1/2 in. (62 and 114 mm), respectively.UNIQUE FIRE STOP PRODUCTS INC — Smooth Firestop A
Reproduced by HILTI, Inc. Courtesy ofUnderwriters Laboratories, Inc.September 02, 2015 Page: 2 of 2
2A. Firestop Device* — (Not Shown) — As an alternate to the smooth sleeve device in Item 2, threaded steel sleeve device incorporating flatwashers secured by threaded couplers. Device shall be installed in accordance with the accompanying installation instructions. Deviceprovided in nom 2 in. and 4 in. (51 and 102 mm) diam sizes. Max diam of opening in wall for nom 2 in. and 4 in. (51 and 102 mm) diamdevices is 2-7/16 in. and 4-1/2 in. (62 and 114 mm), respectively.UNIQUE FIRE STOP PRODUCTS INC — Threaded Firestop2B. Firestop Device* — (Not Shown) — As an alternate to the smooth sleeve and threaded sleeve devices in Items 2 and 2A, threaded steelsleeve halves incorporating split nuts and split washers sized to fit the specific diam of the opening may be used. Device shall be installed inaccordance with the accompanying installation instructions. Device provided in nom 2 in. and 4 in. (51 and 102 mm) diam sizes. Max diamof opening in wall for nom 2 in. and 4 in. (51 and 102 mm) diam device is 2-7/16 in. and 4-1/2 in. (62 and 114 mm), respectively.UNIQUE FIRE STOP PRODUCTS INC — Split SleeveThe L Rating of the firestop system is dependent upon the type of firestop device as tabulated below:

WL 3282
Firestop DeviceL Rating, CFM/sq ft (CFM/firestop device)Ambient400FSmooth Firestop37 (3)18 (2)Threaded Firestop37 (3)18 (2)Split Sleeve54 (5)47 (4)3. Cables — Aggregate cross-sectional area of bundled cables in opening to be max 50 percent of the cross-sectional area of the firestopdevice. The annular space between the cable bundle and the periphery of the firestop device to be min 0 in. (point contact) to max 3 in. (76mm). Cables to be rigidly supported on both sides of the wall assembly. Any combination of the following types and sizes of cables may beused:A. Max 300 pair No. 24 AWG telephone cable with polyvinyl chloride (PVC) insulation and jacket.B. Max 750 kcmil single copper connector power cable with thermoplastic insulation and PVC jacket.C. Max 7/C No. 12 AWG multiconductor power and control cable with PVC or cross-linked polyethylene (XLPE) insulation and PVC jacket.D. Multiple fiber optical communication cable jacketed with PVC and having a max outside diameter of 1/2 in. (13 mm).E. Max 3/C No. 12 AWG with bare aluminum ground, PVC insulated steel Metal-Clad cable.F. Max 1 in. (25 mm) diam metal clad TEK cable with PVC jacket.G. Max 2/0 aluminum SER cable.H. Type RG 59/U coaxial cable with polyethylene (PE) insulation and PVC jacket.4. Fill, Void or Cavity Materials* - Plug — Plug sized for the firestop device friction-fitted within the firestop device in Item 2 or 2A such that theouter circumference of the dome-shaped plug is flush with either end of the firestop device. Plugs sized for the firestop device friction-fittedwithin the firestop device of Item 2B such that the outer circumference of the dome-shaped plug is flush with both ends of the firestop device.Plug(s) cut to fit around the cable bundle and installed tightly within the firestop device.HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC — CP 658T Firestop Plug or CFS-PL Firestop Plug* Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification (such as Canada),respectively.

A44 321A1B3 2
CCLASSIFIEDRClassified byUnderwriters Laboratories, Inc.to UL 1479 and CAN/ULC-S115US Reproduced by HILTI, Inc. Courtesy ofUnderwriters Laboratories, Inc.September 02, 2015 ANSI/UL1479 (ASTM E814)CAN/ULC S115F Ratings — 1 and 2 Hr (See Item 1)F Ratings — 1 and 2 Hr (See Item 1)T Rating — 0 HrFT Rating — 0 HrL Rating at Ambient — 37 or 54 CFM/Sq Ft (See Item 2)FH Ratings — 1 and 2 Hr (See Item 1)L Rating At 400F — 18 or 47 CFM/Sq Ft (See Item 2)FTH Rating — 0 HrL Rating at Ambient — 37 or 54 CFM/Sq Ft (See Item 2)L Rating At 400F — 18 or 47 CFM/Sq Ft (See Item 2) EXISTING ALUMINUM MULLION1/4" THICK x FULL WIDTH NEOPRENE GASKETMETAL EDGE COLOR TO MATCH WALL CONDITION SPECIFIED WALL TYPE SEE SHEET A-2.0

EXISTING GLAZING
1" RETURN#8 S.M.S. TO EA. SIDE OF STUD, TOP AND BOTTOMHEAVY GAUGE BREAK MTL. TO MATCHSTOREFRONT FINISH OR DRYWALL FINISH PAINTEDTO MATCH STOREFRONT FINISH.PARTITION PER PLANEX. STOREFRONT12" MAX.·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338.

COMPOSITE DECK ABOVEFOLD OVER WEB OF STUD, ATTACH KICKER TOSTRUCTURE ABOVE W/ 3/8" DIA. HILTI KB-TZEMBEDDED 2" MIN. @ EA. KICKER.METAL STUD SEISMIC BRACING AT 48" O.C.ALTERNATING EACH DIRECTION. REFER TO STUDCHART AND NOTE 1, DETAIL 12/SHEET A-30.01-1/8" MIN. CLEARANCE45°·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663 LINE OF CEILING - SEE REFLECTED CEILING PLANFOR TYPE AND HEIGHTMETAL STUD FRAMING PER STUD CHART.METAL STUD SEISMIC BRACING AT 48" O.C.ALTERNATING EACH DIRECTION TO STRUCTUREABOVE5/8" GYPSUM BOARD ON EACH SIDEUNDERSIDE CEILING INSULATEDINSULATION - FIBERGLASS NOISE BARRIERFRICTION FIT IN WALL FRAMING METAL GAUGE TOP TRACK ATTACH KICKER ABOVETO TOP TRACK WITH #8 TEK SHEET METALSCREWS. DO NOTATTACH TO GRID SYSTEMMETAL BOTTOM TRACK GAUGE ATTACH TO SLABWITH .145" DIAMETER POWER - DRIVENFASTENER MIN. 1-1/4" EMBEDMENT AT 24" O.C.·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338UNDERSIDE CEILING INSULATEDINSULATION - FIBERGLASS NOISE BARRIERFRICTION FIT IN WALL FRAMING.6" BATT INSULATION TO EXTEND 3'-0" ONEITHER SIDE OF WALLA1A2 7-INSULATION BLANKETS ABOVE CEILING - TYPE A2PARTITIONS

UNDERSIDE CEILING NON-INSULATEDA
LINE OF CEILING - SEE REFLECTED CEILING PLANFOR TYPE AND HEIGHTMETAL STUD FRAMING PER STUD CHART.METAL STUD SEISMIC BRACING AT 48" O.C.ALTERNATING EACH DIRECTION TO STRUCTUREABOVE 6" ABOVE CEILING INSULATEDINSULATION - FIBERGLASS NOISEBARRIER FRICTION FIT IN WALL FRAMING METAL TOP TRACK ATTACH KICKER ABOVE TO TOPTRACK WITH #8 TEK SHEET METAL SCREWS. DONOT ATTACH TO GRID SYSTEMMETAL BOTTOM TRACK ATTACH TO SLAB WITH.145" DIAMETER POWER - DRIVEN FASTENER MIN.1-1/4" EMBEDMENT AT 24" O.C.·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338.B1 6"5/8" GYPSUM BOARD ON EACH SIDE7-INSULATION BLANKETS - TYPE B2 LINE OF CEILING - SEE REFLECTED CEILING PLANFOR TYPE AND HEIGHTMETAL STUD FRAMING PER STUD CHART.METAL BOTTOM TRACK GAUGE ATTACH TO SLABWITH .145" DIAMETER POWER - DRIVENFASTENER MIN. 1-1/4" EMBEDMENT AT 24" O.C.

SLIP TRACK ATTACHED TO UNDERSIDE OFSTRUCTURE ABOVE
·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338.·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663 12-5/8" TYPE "X" GYPSUM BOARD ON EACH SIDE·SLIP TRACK SYSTEMUL-2079 CYCLICAL DESIGN ICC#ESR-2012 OSHPD R-0371-FIXEDEQUIP. ANCHOREDWHI-495-PSV-1333 UL-R19236FULL HEIGHT INSULATEDINSULATION - FIBERGLASS NOISE BARRIERFRICTION FIT.STC 49 (SA-870717):3-5/8" MIN. STUD WIDTH W/ 3" THICK SAFB INCAVITY REQ.C1 EXISTING PARTITION BEYOND, GC TO VERIFYSTRUCTURE BEYONDPROVIDE 16 GA. STUD (CUT TO LENGTH) AT EASTUD FW/ #8 SMS TO TRACK EA FLANGE & (2) #8SMS TO EA (N) STUD. ·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338.·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663METAL BOTTOM TRACK. ATTACH TO SLAB WITH.145" DIAMETER POWER - DRIVEN FASTENER MIN.1-1/4" EMBEDMENT AT 24" O.C.5/8" GYPSUM BOARD ON FACE OF STUDS.

METAL TOP TRACK (GA. TO MATCH STUD U.O.N.)LINE OF CEILING - SEE REFLECTED CEILING PLANFOR TYPE AND HEIGHT WALL FURRING NON-INSULATEDE 6"4"(U.O.N.PER PLAN)CONT. 16 GA. METAL TRACK ATTACHED TO EACHSTUD OF (E) WALL W/ (3) #8 SMS.

METAL STUD FRAMING PER STUD CHART.MAX. HEIGHT 11'-0"16 GA. CRC OR U-CHANNEL CONTINUOUSBRIDGING.16 GA. ANGLE (1-1/2"x1-1/2") AT EA STUD W/ (2)#8 SMS EA. LEG EXISTING ALUMINUM MULLION1/4" THICK x FULL WIDTH NEOPRENE GASKETMETAL EDGE COLOR TO MATCH WALL CONDITION

PARTITION PER PLAN
EXISTING GLAZING1" RETURN8" MIN.U.N.O.VARIES#8 S.M.S. TO EA. SIDE OF STUD, TOP AND BOTTOM ·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PERI.C.C. # ESR - 1338 ·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PERI.C.C. # ESR - 13381/4" THICK x FULL WIDTH NEOPRENE GASKET METAL EDGE COLOR TO MATCH WALL CONDITIONEXISTING GLAZING#8 S.M.S. TO EA. SIDE OF STUD, TOP AND BOTTOM EXISTING ALUMINUM MULLIONPARTITION PER PLANNOTE:PROVIDE INSULATION AS REQUIRED PERSPECIFIED WALL TYPE.1'' RETURNFIRE EXTINGUISHERCABINET - SEE PARTITIONLEGEND FOR SPEC. SEEPARTITION PLAN FORLOCATIONSBPLAN SECTION ASECTION BVARIESMOUNTING SCREW PERMANUFACTURERMETAL STUD PER PARTITIONPLAN5/8" GYP.BOARD TYPICAL.

SEE SPECIFICATION48" MAX.

PAINT EXPOSED CABINET TO MATCH WALLNEW RECESSED FIRE EXTINGUISHER CABINET.REFER TO PARTITION NOTE SHEET FORSPECIFICATION 48" MAX.VERIFY ADA COMPLIANCE
10-
·NON LOAD-BEARING METAL STUD FRAMING SSMA OR EQUAL AS PER I.C.C. #ESR - 3064P·NON LOAD-BEARING METAL STUD C-SECTIONS AND TRACKS SSMA OR EQUAL AS PER I.C.C. #ESR - 3064P(EXAMPLE: 6" = 600 X 1/100 INCHES)ALL MEMEBER DEPTHS ARE TAKEN IN 1/100 INCHES.FOR ALL "T" SECTIONS MEMBER DEPTH IS THEINSIDE DIMENSION.MEMBER DEPTH:FLANGE WIDTH:(EXAMPLE: 1 5/8" = 1.625" ~ 162 X 1/100INCHES) ALL FLANGE WIDTHS ARE TAKEN IN1/100 INCHES.STYLE:(EXAMPLE: STUD OR JOIST SECTION = S )THE FOUR ALPHA CHARACTERS UTILIZED BY THEDESIGNATOR SYSTEM ARE:(EXAMPLE: 0.054 IN. = 54 MILS; 1 MIL =1/1000 IN.) MATERIALTHICKNESS IS THE MINIMUM BASE METAL THICKNESS IN MILS.MINIMUM BASE METAL THICKNESS REPRESENTS 95% OF THEDESIGN THICKNESS.MIL THICKNESS:S = STUD OR JOISTT = TRACKU = CHANNELF = FURRING-600S16254 NOTES1. PROVIDE KICKERS FOR NON-FULL HEIGHT CONDITIONS OR WHERE NOTED OTHERWISE. SEE WALL SCHEDULE FOR MOREINFORMATION.1.1. KICKER LENGTH SHALL BE 8'-0" MAX.2. ALLOWABLE COMPOSITE LIMITING HEIGHTS ARE CALCULATED USING ICC-ES AC86-20123. VALUES REPRESENTED ON THE CHART ARE DESIGNED TO RESIST 5 PSF OF OUT-OF-PLANE LOAD AND L/2404. PROVIDE BRIDGING @ MID-HEIGHT OR A MAX. OF 8'-0" O.C. WHERE GYPSUM BOARD IS NOT APPLIED TO BOTH SURFACES.5. COMPOSITE LIMITING HEIGHTS ARE BASED ON A SINGLE LAYER OF 5/8" TYPE 'X' GYPSUM BOARD INSTALLED IN THE VERTICALORIENTATION TO BOTH SIDE OF THE WALL OVER FULL HEIGHT USING MINIMUM NO. 6 TYPE S DRYWALL SCREWS SPACED AMAXIMUM OF 12" O.C. FOR STUDS AT 24" SPACING AND 16" O.C. FOR STUDS AT 16" AND 12" SPACING.STUD SIZEWALL HEIGHT LIMITKICKERWALL TYPESIZEMIL/GA12"SPACING O.C.SIZESPACING16"24"250S12514'-2"18/25(SEE NOTE 1)15'-4"27/2215'-10"30/20362S12516'-8"18'-2"18'-3"400S12517'-6"19'-5"19'-5"600S12522'-9"26'-9"27'-1" NON-STRUCTURAL METAL STUD WALL SIZING CHART362S125-3348" O.C.400S125-3348" O.C.600S125-3348" O.C.12'-10"11'-3"13'-11"12'-2"14'-5"12'-7"15'-2"13'-2"16'-6"14'-5"16'-7"14'-6"15'-11"13'-8"17'-8"15'-5"17'-8"15'-5"20'-1"24'-4"24'-7"16'-4"21'-3"21'-6"250S125250S125362S125362S125400S125400S125600S125600S12518/2527/2230/2018/2527/2230/2018/2527/2230/20 EQEQ5/8" DEFLECTIONGAP1-1/8"
COMPOSITE DECK OR STRUCTUREABOVE(2) #8 S.M.S 16" O.C. (MAX.).145 DIA. POWER DRIVEN FASTENERAT EA. FLUTE. 1-1/4" MIN.EMBEDMENT2" x 20 GAUGE X 10" LONGGALVANIZED STEEL STRAPS ATTACHEDTO STEEL DECK WITH STEELFASTENERS OR MASONRY ANCHORSON EACH SIDE OF THE FLUTE 12" MAX.SLIP TRACK SYSTEMS#8 WAFERHEAD FRAMING SCREWS(TYP.)TOP OF VERTICAL STUDWALL PARALLEL TO FLUTES5/8" DEFLECTIONGAP1-1/8"COMPOSITE DECK OR STRUCTUREABOVE.145 DIA. POWER DRIVEN FASTENERAT EA. FLUTE. 1-1/4" MIN.EMBEDMENTSLIP TRACK SYSTEMS#8 WAFERHEAD FRAMING SCREWS(TYP.)TOP OF VERTICAL STUDWALL PERPENDICULAR TO FLUTES

STUD WALLSWIDTH VARIESCEILING LINE, SEE RCPFOR CEILING TYPE STUD WALLSWIDTH VARIES·POWER - DRIVEN FASTENERS HILTI OR EQUAL AS PER I.C.C. #ESR - 1663, LARR #25646·SLIP TRACK SYSTEMUL-2079 CYCLICAL DESIGN ICC#ESR-2012 OSHPD R-0371-FIXEDEQUIP. ANCHORED LARR 25344WHI-495-PSV-1333 UL-R19236GYPSUM BOARD PER WALL TYPE GYPSUM BOARD PER WALL TYPESEAL FULLY WITH HILTI CP 506ACOUSTIC SEALANT OR APPROVEDEQUAL.1/2"6"(WHERE NOTED)

CEILING LINE, SEE RCPFOR CEILING TYPE
6"(WHERE NOTED)CUT AND SHAPE GYPSUM BOARDBETWEEN FLUTES WHERE NOTED TO BEFULL HEIGHT. 1/4"
1/4"1/2"ALIGN1/4"1/2"1/4"SCHEDULED DOOR AND FRAMEASSEMBLY; WHERE OCCURSSPECIFIED FLOORINGSTONE THRESHOLDGROUTPORCELAIN TILETHINSET MORTARCRACK SUPPRESSION MEMBRANELVLG AND PATCHING COMPOUND

STOREFRONT DOORPER DOOR SCHEDULEGLAZING
NEW ALUMINUM SADDLE /OFFSADDLE THRESHOLD. PEMKO 158 ORAPPROVED EQUAL. FINISH: TBD 10"1/2"MAX.

STOREFRONT FRAMEBEYONDINTERIOREXTERIOR
1/4"MAX.

A-30.0
1 SCALE
SCALE
SCALE1-1/2"=1'-0"WALL TYPE B1
WALL TYPE C1
SCALE
SCALE
SCALE
SCALE

WALL PARTITION DETAILS
1-1/2"=1'-0"
1-1/2"=1'-0"
1-1/2"=1'-0"

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA WALL TYPE A, A1 AND A2
FURRING WALL - WALL TYPE ESEMI-RECESSED FIRE EXTINGUISHER1-1/2"=1'-0"WALL TO MULLION CONNECTION1-1/2"=1'-0" SCALE FIRE EXTINGUISHER CABINET1-1/2"=1'-0"

NON-STRUCTURAL METAL STUD SIZING CHARTS

WALL TO MULLION CONNECTION
SCALEN.T.S
1-1/2"=1'-0"
SEISMIC BRACING DETAILSCALE1-1/2"=1'-0"
SCALENON RATED FULL HT. SLIP TRACK3"=1'-0"SCALE1-1/2"=1'-0"WALL TO MULLION CONNECTION 17SCALE6"=1'-0"STONE THRESHOLD DETAIL
19 20
SCALE
SCALE

SPECIFYNOT USED

SPECIFYNOT USED
2 3
4 5
6 7
9 10
12 13
16 18SCALE6"=1'-0"THRESHOLD DETAIL AT EXTERIOR DOOR
SCALEN.T.S.FIRE RATED WALL PENETRATION DETAIL15
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
215
4'-0" O.C.2'-0" O.C.MAX.6"4'-0"O.C.4'-0" MAX8" ·BRACING DETAIL USG OR EQUAL #ESR - 1222, LARR #25764 6 4253
VERTICAL STRUT: A STRUT FASTENED TO THE MAINRUNNER SHALL BE EXTENDED TO AND FASTENED TOTHE STRUCTURAL MEMBERS SUPPORTING THE ROOFOR FLOOR ABOVE. THE STRUT SHALL BE ADEQUATETO RESIST THE VERTICAL COMPONENT INDUCED BYTHE BRACING WIRETHESE HORIZONTAL RESTRAINT POINTS SHALL BEPLACED 12 FEET ON CENTER IN BOTH DIRECTIONSWITH THE FIRST POINT WITHIN 6 FEET FROM EACHWALLALL SUPPORT WIRES SHALL BE LOOPED AROUNDRUNNERS, JOIST, SCREW EYES, ETC., WITH MINIMUMOF THREE TURNS, THEN TWISTED ABOUTTHEMSELVES A MINIMUM OF THREE TIMES, TYPICALUNLESS OTHERWISE NOTED123 79 2'-0" O.C.MAX.6"4'-0"O.C.4'-0" MAX12'-0" O.C.8"LINE OF ALL OR ENDOF SUSPENDED CLG.CONSTRUCTION·GYPSUM BOARD ASSEMBLIES GYPSUM ASSOCIATION OR EQUAL AS PER I.C.C. # ESR - 1338.1#12 GAUGE HANGER WIRES SPACED 4'-0"O.C. ALONG 1 1/2" METAL CHANNELS.LOCATE WITHIN 8" OF ENDS OF CHANNELRUNS. ATTACH WIRE TO COMPOSITE METALDECK WITH HILTI CEILING CLIP (CC27-ALH27)ICC-ESR-2184.1-1/2" x 20 GAUGE STEEL CHANNEL AT 4'-0"O.C. PROVIDE 1" CLEARANCE BETWEENABUTTING WALLS AND PARTITIONS. ATCHANNEL SPLICES, INTERIOR LOCK FLANGES,OVERLAP ENDS 12" AND SECURE EACH ENDWITH DOUBLE STRAND 12 GAUGE TIE WIRE7/8" x 20 GAUGE METAL FURRING CHANNELWITH 1" CLEARANCE BETWEEN FURRINGENDS AND ABUTTING WALLS ANDPARTITIONS. ATTACH FURRING CHANNELSTO A 1-1/2" CHANNEL WITH FURRINGCHANNEL CLIPS INSTALLED ON ALTERNATESIDES AT SPLICES, NEST FURRING CHANNELSWITH AT LEAST 8" OVERLAP AND SECURELYWIRE TIE EACH END WITH DOUBLE STRAND12 GAUGE TIE WIRE LATERAL SUPPORT WIRES, #12 GAUGE (MIN)SPLAYED IN FOUR DIRECTIONS 90 DEGREESAPART. CONNECT TO 1-1/2" STEEL CHANNEL AT6" MAX. FROM CROSS FURRING CHANNEL TOSTRUCTURE ABOVE AT AN ANGLE NOT EXCEEDING45 DEGREES FROM PLANE OF CEILING. INSTALLLATERAL SUPPORT WIRES AT 12'-0" INTERVALSEACH DIRECTION WITH THE FIRST POINT AT 4'-0"(MAX) FROM EACH WALL..5/8" GYPSUM BOARD. ATTACH GYPSUM BOARDTO FURRING CHANNELS WITH #8 SHEET METALSCREWS AT 6" O.C.VERTICAL COMPRESSION STRUT, STEEL SECTIONWITH L/R RATIO OF 200 MAX. ATTACH TO MAINRUNNERS WITH 1/4" MACHINE BOLTS AND TOSTRUCTURE WITH 3/8" DIA. HILTI KB-TZ(ESR-1917) EMBEDDED 2" MIN. @ 24" O.C.654 8STRUT HEIGHT6'-0"8'-0"400S162-3314'-0"METAL STUD SIZE400S162-33(2)400S162-33Double Metal Studs#10 SMS @ 12" O.C StaggeredMain runnerFurring channel(2) Metal studs per schedule.3" MAX.Note:L > 14'-0": Provide structural design calculstions

METAL STUD COMPRESSION STRUT SCHEDULE
SEISMIC DESIGN CATEGORIES D,E AND F.1. SUSPENDED CEILINGS IN SEISMIC DESIGN CATEGORIES D,E, AND F SHALL BE DESIGNED AND INSTALLED IN ACCORDANCE WITH ASTMC635, ASTM 636 AND CISCA FOR SEISMIC ZONES 3-4 AS MODIFIED BY THE FOLLOWING:2. A HEAVY DUTY T-BAR GRID SHALL BE USED3. THE WIDTH OF THE PERIMETER SUPPORTING CLOSURE ANGLE SHALL BE NOT LESS THAN 2". IN EACH ORTHOGONAL HORIZONTALDIRECTION, ONE END OF THE CEILING GRID SHALL BE ATTACHED TO THE CLOSURE ANGLE. THE OTHER END IN EACH HORIZONTALDIRECTION SHALL HAVE A 0.75 ". CLEARANCE FROM THE WALL AND SHALL REST UPON AND BE FREE TO SLIDE ON A CLOSURE ANGLE4. FOR CEILING AREAS EXCEEDING 1,000 SF HORIZONTAL RESTRAINT OF THE CEILING TO THE STRUCTURAL SYSTEM SHALL BE PROVIDED. THETRIBUTARY AREAS OF THE HORIZONTAL RESTRAINTS SHALL APPROXIMATELY EQUALEXCEPTION:A. RIGID BRACES ARE PERMITTED TO BE USED INSTEAD OF DIAGONAL SPLAY WIRES. BRACES AND ATTACHMENTS TO THE STRUCTURALSYSTEM ABOVE SHALL BE ADEQUATE TO LIMIT RELATIVE LATERAL DEFLECTIONS AT POINT OF THE ATTACHMENT OF THE CEILING GRID TOLESS THAN O.25" FOR THE LOADS PRESCRIBED IN SECTION 13.3.OF MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURESB. FOR CEILING AREAS EXCEEDING 2,500 SF, A SEISMIC SEPARATION JOINT OR FULL HEIGHT PARTITION THAT BREAKS THE CEILING UP INTOAREAS NOT EXCEEDING 2,500 SF SHALL BE PROVIDED UNLESS STRUCTURAL ANALYSES ARE PERFORMED OF THE CEILING BRACINGSYSTEM FOR THE PRESCRIBED SEISMIC FORCES THAT DEMONSTRATE CEILING SYSTEM PENETRATIONS AND CLOSURE ANGLES PROVIDESUFFICIENT CLEARANCE TO ACCOMMODATE THE ANTICIPATED LATERAL DISPLACEMENTC. EXCEPT WHERE RIGID BRACES ARE USED TO LIMIT LATERAL DEFLECTIONS, SPRINKLER HEADS AND OTHER PENETRATIONS SHALL HAVE A2" OVERSIZE RING, SLEEVE, OR ADAPTER ROUGH THE CEILING TILE TO ALLOW FOR FREE MOVEMENT OF AT LEAST 1" IN ALL HORIZONTALDIRECTIONS. ALTERNATIVELY, A SWING JOINT THAT CAN ACCOMMODATE 1" OF THE CEILING MOVEMENT IN ALL HORIZONTALDIRECTIONS IS PERMITTED TO BE PROVIDED AT THE TOP OF THE SPRINKLER HEAD EXTENSIOND. SUSPENDED CEILINGS SHALL BE SUBJECT TO THE SPECIAL INSPECTION REQUIREMENTS OF ASCE 7-10, SECTION 11A.1.3.9, ITEM 2.E. AS AN ALTERNATE TO PROVIDING LARGE CLEARANCES AROUND SPRINKLER SYSTEM PENETRATIONS THROUGH CEILING SYSTEMS, THESPRINKLER SYSTEM AND CEILING SYSTEM AND CEILING GRID ARE PERMITTED TO BE DESIGNED AND TIED TOGETHER AS AN INTEGRALUNIT. SUCH A DESIGN SHALL CONSIDER THE MASS AND FLEXIBILITY OF ALL ELEMENTS INVOLVED, INCLUDING THE CEILING SYSTEM,SPRINKLER SYSTEM, LIGHT FIXTURES AND MECHANICAL (HVAC) APPURTENANCES. SUCH DESIGN SHALL BE PERFORMED BY A REGISTEREDDESIGN PROFESSIONAL GENERAL NOTES:1. LATERAL FORCE MEMBERS SHALL BE SPACED A MINIMUM OF 6" FROM ALL HORIZONTAL PIPING OR DUCTWORK THAT IS NOT PROVIDEDWITH BRACING RESTRAINS FOR HORIZONTAL FORCES. BRACING WIRES SHALL BE ATTACHED TO THE GRID AND TO THE STRUCTURE INSUCH A MANNER THAT THEY CAN SUPPORT A DESIGN LOAD OF NOT LESS THAN 200 POUNDS OR THE ACTUAL LOAD, WHICHEVER ISGREATER, WITH A SAFETY FACTOR OF 2.2. STRUTS OTHER THAN THE ONES LISTED ABOVE MAY BE USED WITH AN EVALUATION REPORT BY I.C.C. OR OTHER NATIONALLYACCREDITED TESTING LABORATORY.3. ALL 24" x 48" CEILING LIGHT FIXTURES & 24" x 24" HVAC AIR REGISTERS SHALL BE SUPPORTED BY A MIN. OF (2) TWO HANGERS @OPPOSITE CORNERS. CEILING SYSTEM SHALL NOT SUPPORT OTHER ITEMS.4. ALL INTERIOR WALL & CEILING FINISHES SHALL BE INSTALLED IN ACCORDANCE WITH ASTM E 84 SHALL BE FLAME SPREAD CLASS IIIMIN.5. SPRINKLER HEADS AND OTHER PENETRATION CLEARANCE MIN. 2" DIA. OPENING OR A SWING JOINT6. ARMSTRONG ACOUSTICAL CEILING SUSPENSION ICC ESR-13087.BRACING WIRES SECURED TO MAIN RUNNERS WITHIN 2" OF THE CROSS RUNNER INTERSECTION AND SPLAYED 90° FROM EACH OTHERAT AN ANGLE NOT EXCEEDING 45° FROM THE PLANE OF THE CEILING.8.FOR ROOMS WITH SPAN IN EITHER DIRECTION LESS THAN 25', MAIN RUNNERS AND CROSS RUNNERS MAY BE ATTACHED TO THEPERIMETER OF THE TWO ADJACENT WALLS WITH 3/8" CLEARANCE BETWEEN THE RUNNERS AND THE OTHER TWO WALLS. WHERE SPANOF THE CEILING SYSTEM BETWEEN PERIMETER WALLS EXCEED 25' IN BOTH DIRECTIONS, A MINIMUM WALL ANGLE SIZE OF AT LEAST 2"HORIZONTAL LEG SHALL BE USED AT THE PERIMETER WALLS AND INTERIOR FULL HEIGHT PARTITION. THE FIRST TILE SHALL BE 3/4"CLEAR FROM THE WALL SURFACE.9.WHEN THE DISTANCE BETWEEN THE STRUCTURAL DECK AND THE CEILING EXCEEDS 4', THE SPACING OF THE VERTICAL HANGERS SHALLNOT EXCEED 2' O.C. ALONG THE ENTIRE LENGTH OF THE MEANS OF EGRESS SERVICING AN OCCUPANT LOAD OF 30 OR MORE, AND ATLOBBIES ACCESSORY TO GROUP A OCCUPANCIES.4'-0" TYP.1. VERTICAL STRUT: A STRUT FASTENED TO THEMAIN RUNNER SHALL BE EXTENDED TO ANDFASTENED TO THE STRUCTURAL MEMBERSSUPPORTING THE ROOF OR FLOOR ABOVE. THESTRUT SHALL BE ADEQUATE TO RESIST THEVERTICAL COMPONENT INDUCED BY THEBRACING WIRE.2. HORIZONTAL RESTRAINT POINTS SHALL BEPLACED 12 FEET ON CENTER IN BOTHDIRECTIONS WITH THE FIRST POINT WITHIN 6FEET FROM EACH WALL.VERTICAL STRUT (TYP) STD INSTALLATION PERASCE SECTION 13.5.6.2.22'-0"2'-0"2" (MAX) FROM BRACING WIRE TO CROSSRUNNERS.

METAL STUD COMPRESSION STRUT PERSCHEDULE1/4" DIA. MACHINE BOLTACOUSTICAL CEILING TILESCEILING CLIP ASSEMBLY - HILTI CC-CLIPFASTENED W/.177 DIA. POWER DRIVENFASTENER DX-KWIK,LARR-25651-ICC ESR-2184, OR APPROVEDEQUAL1-1/2"-4 TIGHT TURNS12 GA. VERTICAL WIRESPLAYED BRACE WIRECOMPRESSION STRUT ATTACHMENT DETAILS 12'-0"

45.0°
6'-0"MAX.6'-0"MAX12'-0"8"
TYPICAL 12 GA. VERTICAL HANGER WIRE @4'-0" O.C. EACH WAY W/ MIN. 4 TIGHT TURNSIN 1-1/2" BOTH ENDS OF WIRE.12GA. BRACING WIRE W/ MIN. 4 TIGHT TURNS IN1-1/2" BOTH ENDS OF WIRE TYP. 90 APART @ 12'-0"O.C. EA. WAY.STARTING 6' FROM WALLS45.0°O.C.

CEILING GRID GRID MAIN RUNNER12 GA. SPLAYED SEISMIC BRACING WIRE.4 TIGHT TURNSVERTICAL HANGER WIRE ATTACHED TO STRUCTURE WITH 3/8" DIA. HILTIKB-TZ (ESR-1917) EMBEDDED 2" MIN. @ 24" O.C.

CEILING CLIP ASSEMBLY - HILTI CC-CLIPFASTENED W/.177 DIA. POWER DRIVENFASTENER DX-KWIK,LARR-25651-ICC ESR-2184, OR APPROVEDEQUAL EMT COMPRESSION STRUT PER SCHEDULE.ENDS FLATTENED AND ATTACHED AS NOTED COMPRESSION STRUT SCHEDULECOMPRESSION STRUT SCHEDULEHEIGHT3 / 4" EMTMETAL STUD OPTIONUP TO 5'-0"250TI25-33 (20 GA)400S137-33 (20 GA)-400S200-33 (20 GA)UP TO 6'-0"UP TO 7'-0"UP TO 10'-0"1" EMT1 - 1 / 4" EMTEMT OPTION250TI25-33 (20 GA) > 10'-0" : Provide structural design calculations.

COMPRESSION STRUTS 12' O.C, BOTH DIRECTIONS,STEEL SECTION WITH L/R RATION OF 200 MAX.ATTACH TO MAIN RUNNERS WITH 1/4" MACHINEBOLTS AND TO STRUCTURE WITH 3/8" DIA. HILTIKB-TZ (ESR-1917) EMBEDDED 2" MIN. @ 24" O.C.COMPRESSION STRUT SHALL NOT REPLACE HANGERWIRE.MAY BE STEEL STUD, BLACK IRON, EMT OR WOODSTUD (IN COMBUSTIBLE CONSTRUCTION TYPESONLY) OR OTHER APPROVED EQUAL. -

MAIN RUNNERCROSS RUNNER
8"UNATTACHED WALLATTACHED WALL6-
10-3/8" AT TWO ADJACENT WALLS OR3/4" AT ALL FOUR WALLS. SEE NOTE #8 3/8" MIN. CLR.CROSS OR MAIN RUNNER
#12 AWG STEEL WIRE CONNECTOR USED FOR BOTH GRID SUPPORT AND FIXTURESUPPORT. ATTACH TO PERMANENT STRUCTURE. TYP. 6 PLACES2' x 4' FIXTURE SHOWN. DETAIL IS TYPICAL FOR 2' x 2' , 1' x 4' AND MOST OTHERRECESSED TROFFER FIXTURES.TYPICAL OF A VARIETY OF TROFFER FIXTURE SUPPORT WIRE CONNECTIONTABS.PROVIDE MIN. 3 COMPLETE TURNS OF WIRE NO MORE THAN 15" LONG (TYP.)#10 TEK SCREWS LOCATED AT OPPOSITE CORNERS OF RUNNERS THRU INTEGRALFIXTURE SUPPORT TABS - ONE SCREW SHOWN FOR CLARITY. USE OF UL - LISTEDACCESSORY FIXTURE SUPPORT TABS PROVIDED BY FIXTURE MANUFACTURERMAY BE USED IF ACCEPTABLE WITH THE LOCAL CODES. SCREWS SHOULD NOTEXTEND INTO THE BODY OF THE FIXTURE AS THIS MAY DISTORT FIXTURE BODYCREATING LIGHT LEAKAGE. 6"1"SUSPENDED CEILING REFER TO R.C.P. FORSPECIFICATIONPROVIDE NEW 5/8" GYPSUM BOARD ON EACHSIDE

EXISTING STRUCTURE
7/8" SHADOW MOLDING
REFER TO RCP45°2-1/2" x 20 GAUGE METAL STUD. ATTACH TOSTRUCTURE WITH 3/8" DIA. HILTI KB-TZ(ESR-1917) EMBEDDED 2" MIN. @ 24" O.C.2-1/2" x 20 GAUGE METAL STUD KICKERS.ALTERNATING @ 48" O.C. ATTACH TOSTRUCTURE ABOVE WITH 3/8" DIA. HILTI KB-TZ(ESR-1917) EMBEDDED 2" MIN. @ 24" O.C.(3) #10 SHEET METAL SCREWS 6"
CROSS TEETEE-FACE SLEEVE4-WAY SEISMICEXPANSION JOINT CLIPFASTENERMAIN TEEHANGER WIRE NEARTEE END 1" MIN.FIELD CUT MAIN TEECROSS TEEONE SIDE OF SPLICE CAP CRIMPED TOALLOW MOVE MENT ONLY ONOPPOSITE END1" MIN. 3 FULL TWIST MIN.T-BAR CEILING (SEE REFLECTED CLG. PLAN) IFAPPLICABLESCREW TIGHTENED THROUGH MAINRUNNER/CROSS TEE BULB OR WEB7/8"8" MAX ·CEILING TILE AND GRID ARMSTRONG ICC-ESR-1308 L.A. RR. #25032·SEISMIC WALL CLIP BERC2 OR EQUAL ICC - ESR 1308, LARR #25032ARMSTRONG 7/8" ANGLE MOLDINGARMSTRONG BERC2 SEISMIC WALLATTACHMENT CLIP.

ARMSTRONG 7/8" ANGLEMOLDINGARMSTRONG BERC2 SEISMICWALL ATTACHMENT CLIPHANGER WIREMAIN RUNNER/CROSS TEE 7/8"BB

BSECTION VIEW

AISOMETRIC VIEW

SCREW TIGHTENED THROUGHMAIN RUNNER/CROSS TEE BULBOR WEB T-BAR CEILING (SEE REFLECTED CLG. PLAN) IFAPPLICABLE3/4"7/8" ·CEILING TILE AND GRID ARMSTRONG ICC-ESR-1308 L.A. RR. #25032·SEISMIC WALL CLIP BERC2 OR EQUAL ICC - ESR 1308, LARR #25032ARMSTRONG 7/8" ANGLE MOLDINGARMSTRONG BERC2 SEISMIC WALLATTACHMENT CLIP.

ARMSTRONG 7/8" ANGLEMOLDINGARMSTRONG BERC2 SEISMICWALL ATTACHMENT CLIPHANGER WIREMAIN RUNNER/CROSS TEE 7/8"BB

BSECTION VIEW

AISOMETRIC VIEW

LOOSE SLIP SCREW
3 FULL TWIST MIN.LOOSE SLIP SCREW8" MAX
3/4"
A-30.24

SCALEEXPANSION JOINT

SCALESCALEDRYWALL HEADER DETAILSCALESCALE
SCALESUSPENDED GYP. BOARD CEILINGSCALE

SCALELIGHT FIXTURE SEISMIC SUPPORTSCALECEILING DETAILSCOMPOSITE DECK 3"=1'-0"
1-1/2"=1'-0"
1-1/2"=1'-0"
1-1/2"=1'-0"3"=1'-0"

NOT USEDSPECIFY

SCALENOT USED

SPECIFY

SPECIFY

NOT USED

AS NOTED
1-1/2"=1'-0"SUSPENDED CEILING GRID DETAILSCALE1-1/2"=1'-0" PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA

ATTACHED - GRID TO WALL DETAIL
SCALE

SCALENOT USEDSPECIFY

UNATTACHED - GRID TO WALL DETAIL

SPECIFYNOT USEDSPECIFYNOT USED
6 7
8 10
13 14
15 16
17 18
19 20
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
216
A-30.4
DISCLAIMER: THE AGREEMENT SHALL NOT DEVIATE FROM THESEDETAILS IN ANY WAY WITHOUT WRITTEN APPROVAL FROM SAA. ANYDEVIATION FROM THESE DETAILS SHALL BE THE SOLE RESPONSIBILITY ANDLIABILITY OF THE CONTRACTOR.

PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA

AS NOTEDGLASS PARTITION DETAILS

NOT USEDNOT USEDNOT USEDNOT USED

NOT USED

NOT USED

NOT USED

NOT USEDNOT USED
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
217
MELAMINE CABINET INTERIORFINISHED COUNTERTOP OVER 3/4" SUBSTRATECOUNTERTOP WITH 1-1/2" FINISHED EDGEMELAMINE DRAWER INTERIOR1/4" MELAMINE BACK PANELDRAWER PULL AS SPECIFIEDEXTRA HEAVY DUTY FULL EXTENSION DRAWERGLIDES (TYP.)TOE KICK TO MATCH FINISHED FACEFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES

REFER TO ELEVATIONSREFER TO ELEVATION FOR BACKSPLASH
2-1/2"7"7"
4"
2'-0"MAX.DEPEND ON CABINETHEIGHT. REF TO ELEV
2'-0"MAX.REFER TO ELEVATION FOR BACK SPLASHPLASTIC LAMINATE COUNTERTOPWITH 1 1/2" FINISHED EDGE1/4" MELAMINE BACK PANEL

REFER TO ELEVATIONSMELAMINE CABINET INTERIOR
ROUTE OUT FIGURE ±3/32"PAINT ROUTE AREA SEE ELEVATIONS FORCOLOR FINISHED COUNTERTOP OVER 3/4" SUBSTRATECOUNTERTOPWITH 1 1/2" FINISHED EDGEMICROWAVEMICROWAVES REFER TO POWER AND SIGNALPLAN SPECIFICATION INFORMATIONCOORDINATE POWER OUTLET W/ MILLWORK

REFER TO ELEVATIONS
1/4" MELAMINE BACK PANEL
4"SEE SPECIFICATIONSSEE ELEVATION
DOOR PULL AS SPECIFIEDPLASTIC LAMINATE CABINET INTERIORFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES1/4" MELAMINE BACK PANELTRASH CONTAINER BY GENERALCONTRACTORTOE KICK TO MATCH FINISHED FACE2 1/2"3/4" PLASTIC LAMINATE SLIDE OUTTRASH CONTAINER SHELF WITH ANGLEDSIDES ATTACHED TO FRONT W/ 24"DEEP FULL EXTENSION ACCURIDE GLIDES SCRIBE TO CEILING WITH 3/4" REVEALFACE OF WALLPLASTIC LAMINATE SOFFIT MICROWAVESEE SPECIFICATIONSEUROPEAN HINGES, TYP. (BLUM, MEPLA ORSOSS)DOOR PULL AS SPECIFIEDPROVIDE CONTINUOUS METAL BACKINGBEHIND DRYWALLMICROWAVES REFER TO POWER AND SIGNALPLAN SPECIFICATION INFORMATIONCOORDINATE POWER OUTLET W/ MILLWORKFINISHED COUNTERTOP OVER 3/4" SUBSTRATECOUNTERTOPWITH 1 1/2" FINISHED EDGE 3/4" MELAMINE SHELF WITHCHROME SHELF PINS IN 5MMHOLES AT 1-1/4" O.C.MELAMINE CABINET INTERIORFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES ROUTE OUT FIGURE ±3/32"PAINT ROUTE AREA SEE ELEVATIONS FORCOLOR 34" MAX.4"24"
CONTRACTOR TO COORDINATEOPENING FOR SPEAKER.COORDINATE REQUIREMENTSWITH TENANT'S VENDOR.PASS THROUGH OPENING.FOR FINISH REF. TOMILLWORK PLANFINISHED COUNTERTOP OVER3/4" PLYWOOD SUBSTRATE.COUNTERTOP WITH 3" FINISHEDEDGE. ALL CORNERS TO MITERED1-1/4" X 1-1/4" STEEL ANGLESUPPORT AT 36" TO 48" ONCENTER SECURED WITH BACK TOBACK STUDS ROUND OFF ANYSHARP EDGES.

ACCESSIBLE CASH REGISTERCOUNTER, 28" TO 34" HEIGHTAND 36" MIN. WIDTH. 3"34" AFF
11A-30.418"RECEPTION #101LOBBY #100

1. SUBMITTALS. SEE GENERAL REQUIREMENTS SHEETS FOR SCHEDULE OF SUBMITTAL.2. W.I.C. STANDARDS. COMPLY WITH THE WOODWORK INSTITUTE OF CALIFORNIA "MANUAL OF MILLWORK", LATESTEDITION. a) PROJECT STANDARD SHALL BE: X CUSTOM GRADE PREMIUM GRADE b) FLUSH OVERLAY CONSTRUCTION IS STANDARD, U.O.N.3. SCRIBE FINISH. SCRIBE ALL CASEWORK AND MILLWORK TO ADJACENT SURFACES, U.O.N.5. CABINET HARDWARE:4. GROMMET HOLES. PROVIDE 3" DIAMETER WIRE/CORD MANAGEMENT HOLES AND PLASTIC GROMMETS WITH COVERSAT 48" ON CENTER AT ALL COUNTER TOPS. MILLWORKER'S SHOP DRAWINGS SHOW/ INDICATE THE LOCATION, SIZE ANDCOLOR ON NEW GROMMETS. WHERE GROMMETS PENETRATE A BASE CABINET WITH ADJUSTABLE SHELVING, THE MILLWORKER SHALL PROVIDE A 3" PLASTIC LINED OPENING IN EACH SHELF. THE MILLWORK WILL NEEDS TO VERIFY THEQUANTITY OF GROMMETS REQUIRED WITH THE DESIGNER DURING BIDDING. DESIGNER SHALL APPROVE GROMMET LOCATION WITH THE MILLWORK SHOP DRAWINGS.6. ANCHORING AND BACKING. SECURE AND ANCHOR CASEWORK PER NOTES, DETAILS 11 & 12/A-30.5 AND INDUSTRY STANDARDS. BACKING PROVIDED AND INSTALLED BY GENERAL CONTRACTOR.7. OPEN CABINETS. WHERE OPEN CABINETS ARE SHOWN, THE ENTIRE CABINET IS CONSIDERED TO BE EXPOSED SPECIFIED PLASTIC LAMINATE FINISH IS TO BE USED THROUGHOUT.8. CLOSED CABINETS INTERIOR FINISH IS TO BE WHITE "KORTON" INTERIOR SURFACES FOR CABINETS AND SHELVES, U.O.N.. a) COMPLIANCE WITH STANDARDS. INSTALL FINISH HARDWARE COMPLYING WITH ANSI A156.9 "STANDARD FORCABINET HARDWARE". SUBMITTAL. CABINET HARDWARE IS NOTED BY TYPE AND FINISH ONLY. SUBMIT LIST OFALL ITEMS FOR APPROVAL PRIOR CONSTRUCTION.b)PROPOSE HARDWARE TO DESIGNER FOR REVIEW AND APPROVAL PRIOR TO ORDERING.c)PULL TYPE 1: BLDG. STD. , VERTICAL AT DOORS AND HORIZONTAL AT DRAWERS.d)TYPICAL HINGES: CONCEALED CASEWORK HINGES, BLDG. STD. FINISH, FULL OVERLAY APPLICATION AND 110 DEGREES OPENING.e)SHELVES STANDARDS: 3/4" MELAMINE SHELF WITH CHROME SHELF PINS IN 5MM HOLES AT 1-1/4" O.C.f)DRAWER GLIDES: ACCURIDE FULL EXTENSION.g)SILENCERS: PROVIDE SILENCERS AT ALL CABINET DOORS AND DRAWERS.NOTE: PROVIDE AT ALL TYP. HANDRAILS, ELECT.PANEL BOARDS, OVERHANGINGCABINETS,BATHROOM SINK W/ LEDGE PROVIDE STEEL SLEEVES AT ALL FASTENERS3-5/8" x 18 GAUGE STUD PLACED HORIZ.BETWEEN VERT. STUDSBEND STUD FLANGE & RETURN 2"-FASTEN TOSTUD W/ 2-#10 SELF-TAPPING SCREWS20 GAUGE STUDS BOTH SIDES OF BACKING AREA NOTE: PROVIDE AT ALL BATH ACC., SHELVES,DRAPERY ROD, CHALKBOARDS, TACK BOARDS,SCHEDULE BOARDS, TELEPHONE BACKBOARDS,BASE CABINETSAND FLAT SCREENS TV. 18 GAUGE x 12" WIDE SHEET METAL STRIPATTACHED W/MIN. 4-#10 SELF-TAPPING SCREWTO EA. STUD. CONNECT TO 3 STUDS MIN.,(CONTINUOUS)20 GAUGE STUD LINE OF TOE KICK AT ADJACENT CABINETP.LAMINATE BASE TO MATCH UPPERCABINETSCHEDULED FINISH DOOR FRONTS2"1/2"3/8"4"4 7/8"3/4"6" 1 1/2"TO MATCH ADJ. SURFACEDRAWER PULL AS SPECIFIED6" SCHEDULED PULLLINE OF PTN. BEYOND WHERE OCCURSTO MATCH ADJ. SURFACE6"1 1/2" SCHEDULED PULL2"
8- 2'-0"MAX.REFER TO ELEVATION FOR BACKSPLASHFINISHED COUNTERTOP OVER 3/4"SUBSTRATE COUNTERTOP WITH 1-1/2"FINISHED EDGEDOOR PULL AS SPECIFIEDPLASTIC LAMINATE CABINET INTERIORFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES1/4" MELAMINE BACK PANELTRASH CONTAINER BY GENERALCONTRACTOR3/4" PLASTIC LAMINATE SLIDE OUTTRASH CONTAINER SHELF WITH ANGLEDSIDES ATTACHED TO FRONT W/ 24"DEEP FULL EXTENSION ACCURIDE GLIDESTOE KICK TO MATCH FINISHED FACE 4"REFER TO ELEVATIONS2 1/2"

MELAMINE CABINET INTERIOR
34" AFFFINISHED COUNTERTOP OVER 3/4"SUBSTRATE COUNTERTOP WITH 1-1/2" FINISHED EDGE 1/4" MELAMINE BACK PANELTOE KICK TO MATCH FINISHED FACEDOOR PULL AS SPECIFIEDFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDESINSTANT- FLOW HOT WATER. REFER TOPOWER AND SIGNAL PLAN SPECIFICATION INFORMATION

REFER TO ELEVATION FOR BACK SPLASH
4"*CLEAR FLOOR SPACE 30"X48" COMPLYING WITH CBC 2022 SEC 11B-305.7.1IN FRONT OF SINK TO ALLOW FORWARD APPROACH6 1/2"MAXSINK DEPTH *HOT WATER/DRAIN PIPES EXPOSED UNDER SINKS SHALL BEINSULATED TO PROTECT AGAINST CONTACT; NO SHARP ORABRASIVE SURFACES UNDER SINKS *PER CBC 2022 SECTION 606.1ACCESSIBLE SINKS
27" HIGH MIN. KNEE CLEARANCE30" MIN. WIDEINSULATE ALL EXPOSED PIPES AND HOT SURFACES10- 2'-0"MAX.GARBAGE DISPOSAL. REFER TO EQUIPMENTSPECIFICATIONS.FAUCET AND SINK; 612" MAX SINK DEPTH, SINKS SHALL BEMOUNTED WITH COUNTER/RIM NO HIGHER THAN 34"AFF. FAUCET CONTROLS SHALL BE OPERABLE WITH ONEHAND & SHALL NOT REQUIRE TIGHT FRASPING, PINCHINGOR TWISTING OF THE WRIST; REQUIRED FORCED TOACTIVATE CONTROLS SHALL BE NOT GREATER THAN 5 LBF;APPROVED LEVER TYPE ONLY 4 EQUAL DRAWERS9- 2'-0"MAX.
2 1/2"4"REFER TO ELEVATIONSFINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDESDOOR PULL AS SPECIFIEDPLASTIC LAMINATE COUNTERTOPWITH 1 1/2" FINISHED EDGEREFER TO ELEVATION FOR BACKSPLASHMELAMINE DRAWER INTERIOR5/8" MELAMINE BACK PANELMELAMINE CABINET INTERIORFULL EXTENSION DRAWER GLIDES (TYP.)TOE KICK TO MATCH FINISHED FACE REFER TO ELEVATIONS4"
8- 2'-0"MAX.REFER TO ELEVATION FOR BACKSPLASHPLASTIC LAMINATE COUNTERTOPWITH 1 1/2" FINISHED EDGEDOOR PULL AS SPECIFIED3/4" MELAMINE SHELF WITH CHROMESHELF PINS IN 5MM HOLES AT 1-1/4"O.C.FINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES1/4" MELAMINE BACK PANELMELAMINE CABINET INTERIOREUROPEAN HINGES, TYP. (BLUM, MEPLAOR SOSS)TOE KICK TO MATCH FINISHED FACEPER PLAN2 1/2" 9- 2'-0"MAX.REFER TO ELEVATION FOR BACK SPLASHPLASTIC LAMINATE COUNTERTOPWITH 1 1/2" FINISHED EDGEDOOR PULL AS SPECIFIEDMELAMINE DRAWER INTERIORFULL EXTENSION DRAWER GLIDES (TYP.)3/4" MELAMINE SHELF WITH CHROMESHELF PINS IN 5MM HOLES AT 1-1/4"O.C.FINISHED FRONT FACE, FACE FRAMEEDGES AND EXPOSED SIDES1/4" MELAMINE BACK PANELEUROPEAN HINGES, TYP. (BLUM, MEPLAOR SOSS)TOE KICK TO MATCH FINISHED FACE 4"REFER TO ELEVATIONSSEE ELEVATION1/4" MELAMINE BACK PANELFINISHED FRONT FACE, FACE FRAME EDGESAND EXPOSED SIDES3/4" MELAMINE SHELF WITH CHROME SHELFPINS IN 5MM HOLES AT 1-1/4" O.C.MELAMINE CABINET INTERIORPROVIDE CONTINUOUS METAL BACKINGBEHIND DRYWALLDOOR PULL AS SPECIFIED.SEE DETAIL 7/-EUROPEAN HINGES, TYP. (BLUM, MEPLA ORSOSS) SCRIBE TO CEILING WITH 3/4" REVEAL1'-3"FACE OF WALLPLASTIC LAMINATE SOFFIT

MILLWORK DETAILS

SCALESCALE

ACCESSIBLE SINK CABINET
SCALE

SCALESCALE

SCALEUPPER CABINET W/ DOOR
SCALE

BASE CABINET W/ DOOR
SCALE
1"=1'-0"BASE CABINET W/ DRAWERSSCALESCALESCALE

PULL OUT TRASH CABINET
SCALE

BASE CABINET W/ DOOR AND DRAWERS
1"=1'-0"
1"=1'-0"
1"=1'-0"
1"=1'-0"
1"=1'-0"
A-30.5

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED08/06/24X.X.X.X.635036 CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CA SAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCH RECOMMENDATIONSARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFY THEIR RECOMMENDATIONS ATANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENT ACKNOWLEDGES THAT IT WAS BASED ONTHEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES AND DEFENDS SAA FOR ANY USE OF THESE DRAWINGSAND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOR OUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE ASREQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY ORCOMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OF ANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENTBY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THE CDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA N.T.S.MILLWORK NOTES
BACKING PLT. SCHEDULE - TYPE 11-1/2"=1'-0"
BACKING PLT. SCHEDULE - TYPE 21-1/2"=1'-0"
DETAIL AT FALSE TOE KICK1-1/2"=1'-0"
DETAIL AT UPPER CABINET1 1/2"=1'-0"
DETAIL AT LOWER CABINET1 1/2"=1'-0"
1 2
3 4
5 6
7 8
10 11
1216
SCALEDETAIL AT LOWER CABINET1 1/2"=1'-0"9 13SCALEWORK SURFACE DETAIL1"=1'-0" 14SCALEBASE CABINET DETAIL1"=1'-0"
15SCALERECYCLE SYMBOL12"=1'-0"
18SCALEPULL OUT TRASH CABINET1"=1'-0"
19SCALETRASH SYMBOL12"=1'-0"
20SCALEBASE CABINET W/ UNDER COUNTER APPLIANCE1"=1'-0"
08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK NELSONALGAZENo. C-21090REN. 03/31/2025L,CENSE' ARC+,7EC7 S7A7E O) CAL,)ORN,A
218
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-1ELECTRICAL COVER SHEET

SYMBOLS LIST
NOTES

ABBREVIATIONS

FIRE ALARM & LIFE SAFETY

FIXTURE SUPPORT DETAIL

DEMOLITION NOTES

TYPICAL WALL OUTLET SPACING

FIXTURE SCHEDULE NOTES

SCOPE OF WORK FOR LOW VOLTAGE WIRINGIS FOR REFERNCE ONLY ’ ’ ’ ’
“ ”
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-1 Electrical Cover Sheet.dwg, 8/28/2024 11:43:31 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 219
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-2ELECTRICAL SPECIFICATIONSPART 1 of 2 F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-2 Electrical Specifications Part 1 of 2.dwg, 8/28/2024 11:45:13 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 220
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-3ELECTRICAL SPECIFICATIONSPART 2 of 2 F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-3 Electrical Specifications Part 2 of 2.dwg, 8/28/2024 11:36:23 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 221
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-4.1TITLE 24 ENERGYCALCULATIONS 333 City Blvd. West, Suite 300Orange CA 92826(714) 449-1646 Edward D. BurtchE-17083(714) 449-1646333 City Blvd. West, Suite 300Orange CA 92826Engineered Spaces Inc.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-4 Title 24 Energy Calculations.dwg, 8/28/2024 11:36:32 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 222
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-4.2TITLE 24 ENERGYCALCULATIONS 333 City Blvd. West, Suite 300Orange CA 92826(714) 449-1646 Edward D. BurtchE-17083(714) 449-1646333 City Blvd. West, Suite 300Orange CA 92826Engineered Spaces Inc.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-4 Title 24 Energy Calculations.dwg, 8/28/2024 11:46:53 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 223
+9'-11"
+10'-0"
+9'-11"
S
+9'-0"+9'-0"

MSURFACE

SURFACEDDDTTM
S+12'-1"OPEN+8'-1"+9'-0"
M
M
SS
T+77"
T+88"
T+88"T+88"
T+108"
T+108"
+8'-0"
+9'-0"+9'-0"

SFEC SFEC
SFEC
SFEC
SFEC
SFEC
SFEC
SFEC

SFEC SFECSFECSFEC
+9'-0"(E) SFEC
+9'-0"+9'-0" +9'-0"
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-5ELECTRICAL LIGHTING PLAN1/8" = 1'-0" REFLECTED CEILING LEGENDREFLECTED CEILING KEYNOTES4.1PROVIDE EXPANSION JOINT EVERY 2500 SQUARE FEET AS REQUIRED THROUGHOUT AREA OF WORK.SEE DETAIL 13/A-30.2.PROVIDE DRYWALL HEADER AT 1" BELOW ADJACENT CEILING. PAINT WHITE, FLAT FINISH.4.2PROVIDE SOUND BOOTS AT RETURN AIR GRILLES AT ALL PRIVATE OFFICES.4.4CENTER CEILING TILE AND GRID IN ROOM AS SHOWN.4.34.5PROVIDE EXHAUST FAN AND DIFFUSERS AS REQUIRED AT INDICATED ROOMS. SEE MECHANICAL DRAWINGS FORMORE INFORMATION.4.6PROVIDE 24/7 1-TON A/C UNIT ON SEPARATE T-STAT. PROVIDE SEPARATE METER AS REQUIRED PER BUILDINGSTANDARDS.REFER TO ENGINEERING DRAWINGS FOR WASHER/DRYER VENTILATION.4.7 NEW FIXTURE TO BE PROVIDED. SEE LIGHT FIXTURE SCHEDULE FOR SPEC.CEILING HEIGHT AS INDICATED.+X'-X" AREA NOT IN CONTRACT (N.I.C.)EXISTING 2X4 CEILING GRID IS TO REMAIN. THE G.C. IS TO PROVIDE NEW BUILDING STANDARDCEILING TILES THROUGHOUT, U.O.N.NEW 2x4 CEILING SYSTEMCEILING GRIDMANUFACTURER:TO MATCH EXISTINGSIZE:TO MATCH EXISTINGSERIES:TO MATCH EXISTINGCOLOR:TO MATCH EXISTINGCEILING TILEMANUFACTURER:ARMSTRONGSERIES:DUNE SECOND LOOKSIZE:2X4COLOR:WHITEREFERENCE SHEET A-30.2 FOR SPECIFICATIONS AND REQUIREMENTS.EXISTING DRYWALL CEILING TO REMAIN.

INDICATES EXISTING TO REMAIN.ECEILING MOUNTED EXIT SIGN. DARK QUADRANT INDICATES FACE. ARROW(S) INDICATEDIRECTION.NEW DRYWALL CEILING.4.9PROVIDE AB SWITCHING TO CONTROL LIGHT FIXTURES SEPARATELY4.10PROVIDE SOUND BLANKET OVER CEILING ABOVE FOR ADDITIONAL SOUND ATTENUATION.4.12PROVIDE CODE REQUIRED DDC CONTROL UPGRADES THROUGHOUT. REFER TO ENGINEERING DRAWINGS.4.13REWORK EXISTING HVAC, SWITCHING AND CIRCUITING AS REQUIRED AND REBALANCE THROUGHOUT.4.11REWORK EXISTING FIRE SPRINKLERS AS REQUIRED PER NEW LAYOUT. ALL FIRE SPRINKLER HEAD TRIMS TO BEBUILDING STANDARD. AT OPEN CEILING TURN HEADS UP AS REQUIRED PER CODE.4.8PROVIDE NEW CEILING TILES THROUGHOUT, REFER TO CEILING LEGEND FOR TILE SPEC. PATCH EXISTING GRID ASREQUIRED THROUGHOUT, PROVIDE NEW HVAC GRILLES THROUGHOUT. PROVIDE WALL ANGLE WHERE OCCURS,PROVIDE 7/8" SHADOW MOLDING TYPICAL THROUGHOUT.

EXPOSED CEILING NOTES1. ALL DUCTS AND DIFFUSERS, DECKING, FIRE PROOFING, CONDUITS AND OTHER DEVICES SHALL BE PAINTEDWHITE U.O.N.2. ALL CONDUITS AND CABLING TO BE RAN W/ RIGHT ANGLES U.O.N.3. ALL DATA CABLING TO BE RAN IN CABLE TRAYS PAINTED TO MATCH THE CEILING.4. ALL FRAMING ATTACHED TO CEILING DECKS TO BE PAINTED TO MATCH THE CEILING, U.O.N.DESIGN CRITERIA NOTESFIRE AND LIFE SAFETY COMPONENTS1. ALL COMPONENTS SHALL BE WHITE U.O.N.2. FIRE PULL COMPONENTS SHALL BE RED OR OTHER OTHER ACCORDING TO LOCAL JURISDICTION.3. ALL STROBES SHALL BE CEILING MOUNTED, U.O.N. MOUNT IN CENTER OF ACOUSTIC CEILING TILES WHEREOCCURS, U.O.N.4. ALL SPEAKERS SHALL BE FULLY RECESSED CEILING MOUNTED, U.O.N. MOUNT IN CENTER OF ACOUSTICCEILING TILES WHERE OCCURS, U.O.N.5. COMPONENTS SHALL BE MOUNTED WITH CONSISTENT CENTERLINE, U.O.N.GENERAL1. PROVIDE AND INSTALL PERFORATED CEILING GRILLE PANELS AT ALL ACOUSTIC CEILING MOUNTED SUPPLYAND RETURN LOCATIONS, U.O.N. CONFIRM COLOR OF GRILLE WITH ARCHITECT BEFORE PURCHASE ANDINSTALLATION.

LIGHT FIXTURE SCHEDULEMARKSYMBOLFIXTURE TYPEMANUFACTURERCATALOG NUMBERCOLORTEMPREMARKSPROVIDE BATTERY PACK FOR ALL FIXTURES NOTED ON PLAN WITH "EB"3500KTR24-X-835MO-XX-U-FSDINPUT WATTS: 29.9 WPINNACLE ARCHITECTURAL LIGHTING2'X4' LEDDIRECT/INDIRECTLF-2LF-12'X2' LEDDIRECT/INDIRECTPINNACLE ARCHITECTURAL LIGHTING3500KTR22-X-835MO-XX-U-FSDINPUT WATTS: 28.5 WPROVIDE BATTERY PACK FOR ALL FIXTURES NOTED ON PLAN WITH "EB" CEILING MOUNTEDEXIT SIGNLF-XEDGE LIT LEDLITHONIA LIGHTING3500KLITHONIA LIGHTING: EDGR SERIES –GREEN LETTERSCLEAR FACE WITH GREEN LETTERS 4" DIA. RECESSED LEDDOWNLIGHTLF-3LITHONIA LIGHTING3500KLDN4-35/15-LO4-AR-LSS-MVOLT-GZ1INPUT WATTS: 17.5 WPROVIDE BATTERY PACK FOR ALL FIXTURES NOTED ON PLAN WITH "EB"1'X2' LED SURFACE MOUNTLF-4LITHONIA LIGHTING3500KBLWP2-40L-ADP-MVOLT-GZ1-LP835INPUT WATTS: 37 WPROVIDE BATTERY PACK FOR ALL FIXTURES NOTED ON PLAN WITH "EB"OBTAIN ADDITIONAL APPROVAL FROM ARCHITECT PRIOR TO OREDERINGUNDER CABINET STRIP LEDLIGHT FIXTURELF-5CALIFORNIA ACCENT LIGHTING3500KLLED8200-UC-F-4W-10V-3.5K WITH CLASS 2 P.S.LF-5A: DRV60-E-UNV-24VDC-10V; INPUT WATTS: 60 WLF-5B: DRV96-E-UNV-24VDC-10V; INPUT WATTS: 96 WTO COMPLY WITH TITLE 24 REQUIREMENTS. SEE ENGINEER DRAWINGSFOR MORE INFORMATION. PROVIDE SEPARATE SWITCH.

N
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1 LF-1LF-1LF-1LF-1 LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1 LF-1LF-1
LF-1LF-1
LF-1
LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-1LF-1
LF-1LF-1LF-1LF-1
LF-1
LF-2LF-2LF-2LF-2LF-1LF-1
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2 LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2 LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134
CLIENT RESTROOM173
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152 SUPPLY/STORAGE/CHART151
STAFFBREAK ROOM147EXITVESTIBULE148STORAGE143GROUP ROOM 01139 DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136
CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149
TREATMENT OFFICE167
CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118 STORAGE115TESTINGRESTROOM 01114MOTHER'S ROOM108
MEN'SRESTROOM109
MDF/IDF111
MED ROOM 144CONFERENCE ROOM 145GROUP ROOM 04142GROUP ROOM 03140 RECOVERY116CLIA STOR.117
CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164 CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162
CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159
INTERNOFFICE 01153
GROUP ROOM 02141
CLINICIAN'SOFFICE 13135
LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTINGRESTROOM 02112TESTING ROOM113VESTIBULE107 WOMEN'SRESTROOM110
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150LF-1LF-1LF-1LF-1LF-1
FOR ALL LIGHT FIXTURE SPECIFICATION:CONTACT : BRENDA LOWELL, SPECIFICATION SALES, MOBILE: (949) 636-5559, [email protected], PERFORMANCELTG.COM

4.44.10LF-XN
LF-1LF-1

4.44.10LF-1LF-14.44.10
LF-1LF-1LF-1LF-1LF-1LF-1
LF-4

4.14REPLACE EXISTING EXHAUST FAN WITH NEW.

4.144.54.7
LF-1LF-1
WATER HEATER CLOSET132A
LF-44.44.10LF-XN
LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2 LF-XN
LF-2

4.44.104.44.104.44.104.44.104.44.10LF-XNLF-XNLF-XN LF-2LF-XNLF-24.2

4.4 4.54.44.104.44.104.44.104.44.104.44.104.44.104.44.10 LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2
LF-XN

4.14.124.134.114.8THROUGHOUTU.O.N.LF-2LF-XNLF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-14.44.104.44.104.44.10

4.5LF-14.34.3LF-1LF-1LF-1LF-14.34.6LF-1LF-1LF-1LF-1LF-1LF-14.3

4.34.4LF-1LF-1LF-1LF-1LF-1LF-1LF-1LF-1
LF-5B4.3
LF-XNLF-2LF-2LF-2LF-2LF-2LF-2LF-2LF-2

LF-XNLF-XN
LF-1LF-1LF-1LF-1
LF-1LF-1LF-1LF-1
LF-XN4.44.104.44.104.44.104.44.104.44.104.44.10

4.44.104.44.104.44.10

4.44.10 4.44.104.44.10LF-XN
LF-XN
LF-XNLF-XN4.44.104.44.104.44.10
LF-1LF-1LF-1
LF-1LF-1LF-1LF-14.44.10
LF-4LF-4LF-4LF-XNOPEN COLLAB.138A
LF-5ALF-XNLF-XN
LF-XN
LF-3LF-3LF-1LF-3LF-3LF-2LF-2LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3LF-3 LF-3LF-3
LF-1LF-1LF-1LF-1LF-1LF-1LF-2LF-2LF-2LF-2LF-2

4.15PAINT DRYWALL CEILING P-1 FLAT, U.O.N.

4.154.15 4.54.15

LIGHTING PLAN NOTES

TESTING & ADJUSTING OF CONTROLS
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-5 Electrical Lighting Plan.dwg, 8/28/2024 11:50:44 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 224

SURFACE
SURFACESURFACESURFACETBB +36" SURFACE
+7"SURFACE
+42"GFI
J
GFI+18" SURFACE

SFEC SFEC

SFECSFEC

SFECSFEC SFEC
SFEC

SFEC SFECSFECSFEC
NN
N J

NNJNNNNNNJNNNNNJNNNNNNNNKNJNNNNNNNNNNNNNJNNNNNNNNNNNNN NJNNNJNNN JNNNNNNNJNNNJNNNNNNNJNNNNNNNJNNNJNNNNNNNJNNNJNNNNNNNNNJNNNJNNNNNNNJNNNJNNNNNKNNNNN NNNNJNNNNNNN+44"+44"+44"NNNNNNKNKNKNNNJNNNNNJNNNKNNNNNNNNNNNKNKNJNKNN GFI+44"NJNNGFI+44"NN+44"N+44"NNNNKNNNNGFI+44"NGFI+44"NGFI+44"NGFI+44"NN NNN+60"NN NNNKN

JNNNNNJNNNNNNNJNNNNNNNNNJNNNJNNNJNNNNNNJNNNJNNNNNN

NNJNNNJNNNNNNN N
NNN

KNNNNNJNNNNNNNJNNNJNNNKN

JNNNNNNNJNNNN
N
NNNN
NN
N+60"

NNNNJNNNJNNNN
NN
KN

KNJNNNNNNNNN
NNN+60"NNKNNN+44"NSNN+44" N+60"KN NN+44"N
NNNN
NNN
(E) SFEC NNNNNNJNNNNNNNN+44"NN
KNNNN+44" KNKNGFI+44"NN+44"

NNNNNNNNN NNNNN

NNN NNNNNNNNNN

NNNNNNNN

NNNNN N
NNNN

N NN NNNNNNNNN NNNNNNNNNNNN

NNNNNNNNNNN

NNNN NNNNN
KN
NNN
NNN
NNNN
N+44"JN
SFEC
NN+44"N+24"NSNN+44"N+44"SFECNNNNN N+44"N+44"N+44"NS+44"NN N+44" 4 & 5-
2-
1- LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134 CLIENT RESTROOM173GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152SUPPLY/STORAGE/CHART151 STAFFBREAK ROOM147EXITVESTIBULE148GROUP ROOM 01139DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136 CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149TREATMENTOFFICE167CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114MOTHER'SROOM108MEN'SRESTROOM109MDF/IDF111GROUP ROOM 04142GROUP ROOM 03140RECOVERY116 CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159INTERNOFFICE 01153 GROUP ROOM 02141
CLINICIAN'SOFFICE 13135LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTINGRESTROOM 02112TESTING ROOM113VESTIBULE107WOMEN'SRESTROOM110 HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
CLIA STOR.117
WATER HEATER CLOSET132A
OPEN COLLAB.138A

3.183.21

3.123.12

3.123.123.183.123.183.123.183.123.18 3.183.103.11

3.2 3.183.123.253.43.223.13.133.123.123.123.123.12

3.123.123.123.123.12

3.93.123.123.123.12

3.18 3.103.113.183.123.18GROUP ROOM 011723.12

3.19THROUGHOUT U.O.N.3.23.93.23.123.123.123.12

3.133.173.203.133.173.203.83.253.133.123.253.43.13.133.253.133.123.223.43.12

3.123.123.123.123.123.123.123.123.123.123.123.123.253.53.13.133.4

3.12 3.253.13

3.13.133.25

3.43.13.133.253.16
MED ROOM144CHART/SUPPLY/STORAGE143CONFERENCE ROOM145
CLUBHOUSE174
STAFFBREAK ROOM147

3.143.253.63.73.33.43.53.13.13

3.33.73.63.143.253.43.53.13.133.15
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA ELECTRICAL POWER PLANE-6.1

AS NOTED
NPOWER/ VOICE/ DATA LEGENDPOWER/ VOICE/ DATA KEYNOTES2SCALE:1/4" = 1'-0"ENLARGED PLAN AT STAFF BREAK ROOM #147 1SCALE:1/4" = 1'-0"ENLARGED PLAN AT CLUBHOUSE #174
POWER/ VOICE/ DATA KEYNOTES CONT.

N+60"N+60"
N+60"N+60"N+60"N+60"
WALL MOUNTED DUPLEX ELECTRICAL OUTLET. SEE ENGINEER'S DRAWINGS FOR CONDUIT SIZE.

KEY CARD READER. PROVIDE (1) 3/4" CONDUIT AND A FLUSH MOUNTED SINGLE GANG BOX. CONDUIT IS TO STUBOUT 6" ABOVE CEILING, STUB OUT ON CORRIDOR SIDE. AT HINGE SIDE OF DOOR PROVIDE A 3/4" CONDUIT ATTHE SECOND HINGE FROM THE BOTTOM TO 6" ABOVE THE CEILING, STUB OUT ON TENANT SIDE. REFER TODETAIL 3/-.TELE COMMUNICATIONS/DATA WALL OUTLET. PROVIDE EMPTY J-BOX OR PLASTER RING & 3/4 DIA. EMPTYEMT CONDUIT STUBBED-UP @+/-6" ABOVE SUSP. CLG. W/ PROTECTIVE PLASTIC RING & PULL STRING/TENANT'S VENDOR TO PROVIDE COVER PLATES AND PLENUM RATED CABLES. VERIFY SIZE OF CONDUIT WITHCABLING/PHONE VENDOR OR WHEN FEEDING MORE THAN (1) LOCATION.

WALL MOUNTED DUPLEX ELECTRICAL OUTLET, SEPARATE CIRCUIT. SEE ENGINEER'S DRAWINGS FOR CONDUITSIZE.WALL POWER IN-FEED JUNCTION BOX FOR WORKSTATIONS POWER AND TELEPHONE/DATA. VERIFY POWERREQUIREMENTS WITH THE FURNITURE VENDER AND THE ELECTRICAL DRAWINGS FOR THE NUMBER OFCIRCUITS TO BE PROVIDED. AT DATA/PHONE PROVIDE A DOUBLE GANG TELEPHONE BOX WITH SINGLE GANGMUD RING. PROVIDE 1-1/2" CONDUIT WITH PULL STRING AND STUB-UP AT +6" ABOVE THE CEILING WITH ASUPER FLEX CONDUIT, UNLESS OTHERWISE NOTED ON PLAN. EXACT LOCATIONS & POWER REQUIREMENTSTO BE DETERMINED BY TENANT'S FURNITURE VENDOR.K WHERE PLUS HEIGHT IS INDICATED, HEIGHT IF NOT STANDARD.REFER TO TYPICAL SHEET NOTE A-0.1 FOR MOUNTING HEIGHT INFORMATION.TYPICALNOTE:INDICATES NEW OUTLET.NINDICATES GROUND FAULT INTERRUPTER.G.F.I.

FLUSH FLOOR MOUNTED FIRE RATED JUNCTION BOX, TELE/DATA AND DUPLEX OUTLET. VERIFY CONDUIT SIZEFOR DATA/TELE REQUIREMENTS. COORDINATE LOCATION W/ TENANT AND FURNITURE CONTRACTORREQUIREMENTS.FLUSH FLOOR MOUNTED RATED JUNCTION BOX POWER AND TELEPHONE DATA IN-FEED FOR WORKSTATIONSTO UNLESS OTHERWISE NOTED. VERIFY POWER REQUIREMENTS WITH THE FURNITURE VENDOR AND THEELECTRICAL DRAWINGS FOR THE NUMBER OF CIRCUITS TO BE PROVIDED. AT TELEPHONE DATA PROVIDE A1-1/2" CONDUIT FROM FLOOR BOX BACK TO AN ACCESSIBLE CEILING ON THE TENANTS FLOOR. EXACTLOCATION AND POWER REQUIREMENTS TO BE DETERMINED BY TENANT'S FURNITURE VENDOR.

INDICATES EXISTING BLANK PLATED J-BOX. CAN BE CONVERTED TO A TELE/DATA OUTLET.BNEW WALL MOUNTED JUNCTION BOX. PLUS HEIGHT INDICATES HEIGHT IF NOT STANDARD. PROVIDE A SINGLE 20AMP CIRCUIT FOR HARDWARE CONNECTION OF EQUIPMENT. ELECT. SUB-CONTRACTOR IS TO CONNECT DEVICE.J WALL MOUNTED QUADPLEX ELECTRICAL OUTLET. SEE ENGINEER'S DRAWINGS FOR CONDUIT SIZE.

WALL MOUNTED MAGNETIC HOLD OPEN. MOUNT 10" FROM TOP OF DOOR.H

3.1ALL POWER RECEPTACLES WITHIN 6'-0" OF SINK SHALL BE GFI.3.2PROVIDE SEPARATE CIRCUIT FOR TENANTS COPIER, (N.I.C.) VERIFY ELECTRICAL REQUIREMENTS AND PLUG TYPE.KONICA BIZHUB 558 OR BIZHUB C458, 120 V, 16AMP. VERIFY AND PROVIDE RIGHT PLUG TYPE WITH TENANT.3.3PROVIDE SEPARATE CIRCUIT CONFIGURATION FOR REFRIGERATOR. VERIFY ELECTRICAL REQUIREMENTS.REFER TO SHEET A-0.3 FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.3.4PROVIDE POWER FOR ELECTRICAL INSTA-HOT WATER HEATER. VERIFY ELECTRICAL REQUIREMENTS.REFER TO SHEET A-0.3 FOR SPECIFICATION.3.5PROVIDE POWER FOR UNDER COUNTER GARBAGE DISPOSAL WITH ON/OFF SWITCH AT +44" A.F.F.VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION.3.6PROVIDE SEPARATE CIRCUIT @ +44" A.F.F. FOR TENANT'S COFFEE MAKER, N.I.C. VERIFY ELECTRICALREQUIREMENTS.3.7PROVIDE SEPARATE CIRCUIT FOR MICROWAVE OVEN. REFER TO ELEVATION FOR EXACT MOUNTINGHEIGHT. VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION.CONTRACTOR TO PROVIDE AND INSTALL.3.8PROVIDE SEPARATE CIRCUIT CONFIGURATION FOR UNDERCOUNTER REFRIGERATOR. VERIFY ELECTRICALREQUIREMENTS. REFER TO SHEET A-0.3 FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.3.93.10GC TO COORDINATE EXACT LOCATION OF POWER AND DATA FLOOR CORES WITH TENANT'SFURNITURE VENDOR. COORDINATE WITH BUILDING ENGINEER PRIOR TO CORING.3.11PROVIDE 2" CONDUIT FROM POWER/VOICE/DATA FLOOR OUTLET TO ADJACENT WALL OUTLET FOR TENANT'S T.V.3.123.13PROVIDE POWER FOR AUTOMATIC FAUCET. SEE ELECTRICAL DRAWINGS FOR MORE INFORMATION.3.163.17PROVIDE POWER AS REQUIRED FOR AUTOMATIC PAPER TOWEL DISPENSER. SEE SHEET A-0.7A FORSPECIFICATIONS AND ELECTRICAL ENGINEER'S DRAWINGS FOR MORE INFORMATION.3.18PROVIDE RECESSED DUPLEX AND TELE/DATA OUTLETS FOR WALL MOUNT TV. EXACT LOCATION ANDMOUNTING HEIGHT TO BE VERIFIED IN FIELD. PROVIDE BACKING IN WALL IF REQUIRED, VERIFYREQUIREMENTS.3.19ALL COVER PLATES & DEVICES TO BE BUILDING STANDARD WHITE. PROVIDE COST TO REPLACETHROUGHOUT AREA OF WORK AS REQUIRED AND ADJUST TO COMPLIANT HEIGHT AS REQUIRED.QUANTITIES TO BE VERIFIED IN FIELD.3.20PROVIDE POWER AS REQUIRED FOR AUTO FLUSHER AT WATER CLOSET. SEE SHEET A-0.7A FORSPECIFICATIONS AND ELECTRICAL DRAWINGS FOR MORE INFORMATION.

3.143.15PROVIDE POWER FOR BOTTLE FILLER, REFER TO A-0.3 FOR SPECIFICATIONS, MOUNTING HEIGHT FORACCESSIBILITY. CONTRACTOR TO PROVIDE AND INSTALL.NEW ADA COMPLIANT DISHWASHER. VERIFY ELECTRICAL REQUIREMENTS. REFER TO SHEET A-0.3FOR SPECIFICATION. CONTRACTOR TO PROVIDE AND INSTALL.

TENANT'S FURNITURE VENDOR TO PROVIDE DIMENSIONS FOR FURNITURE FEEDS AND TO APPROVE LOCATIONSIN FIELD PRIOR TO INSTALLATION.PROVIDE EMERGENCY BUTTON TIED TO TENANT SECURITY SYSTEM AT LOCATIONS INDICATED ONPLANS. REFER TO ENGINEER'S DRAWINGS FOR MORE INFORMATION. PLACE NEXT TO WALL LIGHTSWITCH WHERE APPLICABLE. VERIFY EXACT LOCATION AND REQUIREMENTS WITH TENANT'SSECURITY VENDOR AT ALL OFFICES/RECEPTION DESKS. PULL WIRING THROUGH DATA DROP ANDMOUNT EMERGENCY BUTTON TO FURNITURE/BUILT-IN WORK SURFACE.

3.21PROVIDE POWER AND PLUMBING FOR WASHER/DRYER, REFER TO A-0.3 FOR SPECIFICATIONS.

3.22PROVIDE SEPARATE CIRCUIT OUTLET FOR LOCKABLE REFRIGERATOR. REFER TO A-0.3 FOR SPECIFICATIONS.CONTRACTOR TO PROVIDE AND INSTALL.3.23REFER TO ENGINEERING DRAWINGS FOR PLUMBING REQUIREMENTS AND FIXTURES FOR NEW WATER HEATER CLOSET.3.243.25PROVIDE POWER FOR AUTOMATIC PAPER TOWEL DISPENSER. BOBRICK B-29744, CONTRACTOR TO PROVIDE ANDINSTALL FIXTURE, REFER TO #3/A-0.7 FOR MOUNTING HEIGHT. PROVIDE 6" MIN WALL PER MANUFACTURALSPECIFICATION FOR SEMI RECESSED INSTALL.PROVIDE POWER AND SWITCH FOR MOTORIZED PROJECTION SCREEN. CONTRACTOR TO COORDINATE WITH TENANT'SVENDOR FOR FIXTURE SPECIFICATION, REQUIREMENTS AND EXACT MOUNTING LOCATIONS. 4'-0"
COMMON 4S PULL BOX. PROVIDEA 1" CONDUITBACK TO CONTROLLER3/4" CONDUIT TO ACCESSCONTROLLER READER.3/4" CONDUIT TO ELEC. HINGELOCATIONACCESS CONTROL READER3SCALE:NTSKEYCARD READER CONNECTIONTOP OF BOX DESIGN CRITERIA NOTESSWITCHES AND RECEPTACLES1. ALL SWITCHES AND RECEPTACLES AT P-1 AND/OR WHITE WALLS SHALL BE WHITESCREWLESS, U.O.N. GC TO CONFIRM COLOR FINISH ON ALL SUCH COMPONENTSAT NON-WHITE WALLS WITH ARCHITECT BEFORE PURCHASE AND INSTALLATION.2.ALL RECEPTACLES INSIDE WHITE MILLWORK SHALL BE WHITE SCREWLESS, U.O.N.3. GC SHALL BE RESPONSIBLE FOR CONFIRMING RECEPTACLE TYPES FOR SPECIALEQUIPMENT (SUCH AS COPY MACHINES)WITH CLIENT AND ARCHITECT BEFOREPURCHASE AND INSTALLATION.4. ALL VOICE AND DATA OUTLETS SHALL MATCH POWER OUTLETS AS ABOVE U.O.N.5. ALL DIMMER SWITCHES SHALL MATCH POWER SWITCHES AS ABOVE U.O.N.6. SWITCHES AND RECEPTACLES MAY BE LEVITON DECORA, LUTRON, OR COOPER,U.O.N.7. SUBMIT SAMPLES OF SWITCHES AND PLATES FOR APPROVAL. 1F-1REMOVE ALL EXISTING CABLES.MDF ROOM SPECIFIC KEYNOTES1F-2PROVIDE DEDICATED 1 TON A/C UNIT ON A SEPARATE METER.1F-3VERIFY IN FIELD FOR EXACT LOCATION OF NEW OUTLETS WITH TENANT AND TENANT'S IT VENDOR.1F-4PROVIDE FIRE TREATED BACKBOARDS PER NEW LAYOUT.1F-5ALL POWER OUTLETS NEED TO BE ON A DEDICATED SEPARATE CIRCUIT.4SCALE:NTSMDF/IDF #111 LAYOUT GC TO COORDINATE EXACT LOCATION OF OUTLETS IN ALL OFFICES WITH TENANT'S FURNITUREVENDOR PRIOR TO ROUGH IN. 5SCALE:1/4" = 1'-0"ENLARGED MDF/IDF #111
NNNNN
N

POWER PLAN NOTES
THEBUILDING STEEL MUST BE CONTINUOUS AND BONDED TO THE GROUNDING ELECTRODESYSTEM.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-6.1 Electrical Power Plan.dwg, 8/28/2024 4:02:44 PM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 225
+9'-11"
+10'-0"
+9'-11" +9'-0"+9'-0"

MSURFACE
TTM+12'-1"OPEN+8'-1"+9'-0"
M
M
T+77"
T+88"
T+88"T+88"
T+108"
T+108"
+8'-0"
+9'-0"+9'-0"

SFEC SFEC
SFEC
SFEC
SFEC
SFEC
SFEC
SFEC

SFEC SFECSFECSFEC
+9'-0"(E) SFEC
+9'-0"+9'-0" +9'-0"LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134 CLIENT RESTROOM173
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152 SUPPLY/STORAGE/CHART151
STAFFBREAK ROOM147EXITVESTIBULE148STORAGE143GROUP ROOM 01139 DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136
CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149
TREATMENT OFFICE167
CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118 STORAGE115TESTINGRESTROOM 01114MOTHER'S ROOM108
MEN'SRESTROOM109
MDF/IDF111
MED ROOM 144CONFERENCE ROOM 145GROUP ROOM 04142GROUP ROOM 03140 RECOVERY116CLIA STOR.117
CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164 CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162
CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 10159
INTERNOFFICE 01153
GROUP ROOM 02141
CLINICIAN'SOFFICE 13135
LAUNDRY133CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTINGRESTROOM 02112TESTING ROOM113VESTIBULE107 WOMEN'SRESTROOM110
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
WATER HEATER CLOSET132A
OPEN COLLAB.138A
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-6.2HVAC COORDINATIONPOWER PLAN1/8" = 1'-0" N
“”
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-6.2 HVAC Coordination Power Plan.dwg, 8/28/2024 11:50:22 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 226
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA PANEL SCHEDULES E-7.1 ·······
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-7.1 Panel Schedules.dwg, 8/28/2024 11:37:49 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 227
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.comT 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA SINGLE LINE DIAGRAME-7.2 SCALE: 1/8" = 1'-0"SINGLE LINE DIAGRAM1

PANEL SCHEDULES GENERAL NOTESSINGLE LINE DIAGRAM GENERAL NOTES F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-7.2 Single Line Diagram.dwg, 8/28/2024 4:08:41 PM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 228
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-8TYPICAL LIGHTING CONTROLDIAGRAMS (WATTSTOPPER)SCALE:"RC3" ROOM CONTROLLER WITH WALL STATION CONTROLNONE3B SCALE:"RC3" ROOM CONTROLLER WITH WALL SENSOR CONTROLNONE3A SCALE:"RC2" ROOM CONTROLLER WITH WALL STATION CONTROLNONE2B SCALE:"RC2" ROOM CONTROLLER WITH WALL SENSOR CONTROLNONE2A SCALE:"RC1" ROOM CONTROLLER WITH WALL STATION CONTROLNONE1B INPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 W SCALE:"RC1" ROOM CONTROLLER WITH WALL SENSOR CONTROLNONE1A SCALE:"EL" ELCU 200 TYPICAL WIRING DIAGRAMNONE1C
INPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 W INPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 W INPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 WINPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 W INPUT MODULE LMIN-104 SHALL BEPROVIDED WHERE SCOPE OF WORK ISMINIMUM 4,000 W LMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANS LMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANS LMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANS LMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANSLMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANS LMLS 500 PHOTOSENSORSHALL BE INSTALLEDWHERE SO NOTED ON PLANS F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-8 Lighting Control Details.dwg, 8/28/2024 11:38:07 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 229
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036

ELECTRICAL STAMP
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA E-9ELECTRICAL DETAILS 3/16"Ø - PUNCHED, NOT DRILLED
SCALE:6TYPICAL TEL. BOARD GROUNDING BAR INSTALLATIONNONE

DO NOTDISCONNECT

HOLE PATTERN DETAIL
2"2"1"3/4"
TY-RAPS TO SECURE AS SHOWN.PROVIDE BRASS TAGS ON CABLES TO MSGONLY, BRASS TAGS - PANDUIT P/N MTB150D-QTHEN HAVE ENGRAVER STAMP THEM "DO NOTDISCONNECT".OF THE CABLE. USE 1/16" WIDE WHITETERMINATION POINTS OF THE OTHER ENDGREEN BACKGROUND. TEXT TO INDICATEHIGH ENGRAVED WHITE LETTERS ONPHENOLIC NAMEPLATE WITH 1/4"PROVIDE ON EACH CONDUCTOR A3- SCALE:PANELS NAMEPLATEFULL SIZE5
208Y/120V, 3Ø, 4W

ADJACENT ADDITIONAL PANEL SECTIONS
DIST. PANEL CRPP1A1DIST. PANEL CRPP1A1
GENERAL NOTES: C. CENTER ALL TEXT HORIZONTALLY.D. MODIFY TEXT AS REQUIRED. 1"

2.5"

NAMEPLATE MOUNTING LOCATION

CENTERLINE OF INNER DOOR
1/4"WIDTH AS REQUIRED, 5" MIN.MAIN BUS SIZE IF MAIN LUGS ONLY ORTRIP RATING OF MAIN BREAKERSECTION 23/16"3/16"1/4"3/16"3/16" USE "BOLD" STYLE TEXTFED FROM MHS1AWIDTH AS REQUIRED, MIN. 5" 225A MCB22,000 IER1/4"1/4"3/16"3/16"1/4"3/16"3/16"1/4"1/4"1/4"USE RIVETS NOT DOUBLE-STICK TAPEFOR EXTERIOR LOCATIONS CL CL 1/2"PURPLEORANGENOT PAINTEDREDYELLOWBLUE & WHITEGREEN & BLUEORANGE & WHITENOT PAINTED PVC-NOT PAINTEDPAINT J-BOXES PRIOR TO INSTALLATION. PAINT OVERSPRAY ON CONDUITS AND SURROUNDING SURFACES WILL BEREJECTED.WRAP 0.75" WIDE ELECTRICAL TAPE TWICE AROUND CONDUIT. USE TWO ROWS TO GET 1.5" WIDE STRIPE. USE ONEROW EACH IF TWO COLORS ARE REQUIRED.REFER TO SPECIFICATION SECTION 16195 FOR ADDITIONAL INFORMATION.INSTALL TAPE CONSISTENTLY ON ONE SIDE ONLY OF EACH COUPLING. ALIGN WITH OTHER ADJACENT CONDUITS.INSTALL TAPE AT EACH J-BOX, CHANGES IN DIRECTION, AT PENETRATIONS OF WALLS AND FLOORS, AND AT 10-FOOTMAXIMUM INTERVALS IN STRAIGHT RUNS (ON ONE SIDE OF COUPLING FITTINGS).IT IS THE CONTRACTOR'S RESPONSIBILITY TO ENSURE THAT THE COLOR BANDING IS NOT PAINTED OVER BY THEARCHITECTURAL PAINTING CONTRACTOR.

GENERAL NOTES:

COLORJ-BOX PAINT

GROUND CONDUITS
480V NORMAL208/120V NORMALSECURITYTELECOMFIRE ALARMBMS CONTROLS208/120V UPS480/277V UPS277V NORMAL (LTG.)SERVICE

GREENWHITEGREEN
BLUEBLUE & WHITEORANGE & WHITEGREEN & BLUEYELLOWREDWHITEORANGECONDUIT TAPECOLOR LEGEND1COLORPURPLE2 BLUEWHITEBLACKBLACKWHITEWHITEWHITEWHITEWHITEYELLOWBLACKREDWHITEBLUEORANGEORANGEBACKGROUNDNAMEPLATE COLORWHITETEXTDARK PURPLE3 PANEL, MCC, ENCLOSURE, ETC.PAINTED J-BOX AND COVER
10 HP., 480V, 3ØFED FROM XXPANEL CRPP1A131MARKING TAPE2BRPP1A1-22,24,26ON POWER CONDUITS SHOW CIRCUITNUMBERS OF ALL CIRCUITS IN J-BOX. USE1" WIDE KROY OR BROTHERS LABELINGTAPE WITH BLACK 1/2" HIGH HELVETICABOLD LETTERING ON WHITEBACKGROUND.ENGRAVEDNAMEPLATES SCALE:4RACEWAY AND NAMEPLATE IDENTIFICATIONNONE
SCALE:TELEPHONE/DATA OUTLETSFULL SIZE7 SCALE:TYPICAL FIRESTOP PENETRATION DETAILSFULL SIZE8 A. SEE SPECIFICATIONS FOR ADDITIONAL NAMEPLATE INFORMATION AND COLORS OF NAMEPLATES FOR DIFFERENT SYSTEMS.B. PROVIDE ONE NAMEPLATE FOR EACH PANEL OR MCC SECTION. WHERE SECTION NUMBER TWO AND ABOVE ARE WITHIN SAME. ROOM AND WITHIN 10' OF EACH OTHER USE THE SMALLER SIZE NAMEPLATE.SCALE:1ESD GROUNDING FOIL CONNECTION AT RECEPTACLENONE SCALE:EQUIPMENT MOUNTED RECEPTACLE DETAILFULL SIZE2
SCALE:GROUNDING AND BOUNDINGFULL SIZE3 F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) E-9 Electrical Details.dwg, 8/28/2024 11:38:13 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 230
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-1.0HVAC NOTES & DETAILS

CEILING DIFFUSER DETAILROOFTOP AC UNIT INSTALLATION

ROUND DUCT HANGERS
TO 2" WG.POSITIVEPRESSUREROUND DUCT & FITTINGS CONSTRUCTIONSMACNA (2006 HVAC ROUND CONSTRUCTION STANDARDS)(SUPPLY, RETURN, MAKE-UP AIR)ROOF TOP EXHAUST FAN DETAIL LEGEND
INSTALLED BY MECH. CONTRACTORPROVIDED & WIRED BY OTHERS(R)CSFDFD(REB)(N)(E)

NEW OR RELOCATED DUCTNEW OR RELOCATED THERMOSTAT

CONSTRUCTION NOTES

MANDATORY MEASURESCALGREEN
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:14 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 231

SURFACE

POWERPANELPOWERPANELPOWERPANELPANEL BOARDSWITCHBOARDSWITCH BOARDSWITCH BOARD

SURFACESURFACESURFACEFIRECONTROLPANELBUILDINGPOWERTBB

EPEPEPEP
EPEP+36" SURFACEEPEPPANEL WITH21THERMOSTATS
S
+7"SURFACESURFACE

SURFACEDDDTT
SOPEN
+7 1/2" AFF
FA+42"GFI
FE
ALARM

FAALARM FA
J
CHASE+14"
GFIW/HW/H+18" SURFACE
+8 1/4" AFF
+8 1/4" AFFSURFACEMOUNTEDCHASE

SURFACEMOUNTEDCHASE
FE
SS
T+77"
T+88"
T+88"T+88"
T+108"
T+108"

JSURFACEJSURFACE

TV MOUNT

TV MOUNT

JSURFACE

TV MOUNTTV MOUNTTV MOUNTTV MOUNTTV MOUNT
(E) SFEC
+9'-0"+9'-0" +6'-9"
+9'-10"
+8'-0"
+11'-4"
M
M
M
+7'-6"+9'-0"+9'-0"
+7'-11"+7'-11"+7'-11"+7'-10"+9'-0"+8'-1"+12'-1"M
M
+9'-0"+9'-0"
+9'-11"+9'-11"
+10'-0" PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-2.0HVAC DEMOLITION PLAN1/8" = 1'-0" N
MECHANICAL CONTRACTOR SHALL INCLUDE IN THE BASE BID TO DEMOLISH ALLEXISTING AIR DISTRIBUTION UP TO SUPPLY/ RETURN AIR PLENUMS. FIELDVERIFY SUPPLY/ RETURN SHOWN ON THE PLAN.PATCH AND REPAIR PLENUMS/INSULATION.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:15 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 232
+9'-0"+9'-0"+9'-0"
+9'-0"
+8'-0"
+9'-0"+8'-1"
+9'-11"+9'-11"
+10'-0" PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-2.1HVAC PLAN1/8" = 1'-0" N
LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134
CLIENT RESTROOM173
GROUP ROOM 01172GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152 SUPPLY/STORAGE/CHART151
STAFFBREAK ROOM147EXITVESTIBULE148STORAGE143GROUP ROOM 01139 DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136
CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149
TREATMENT OFFICE167
CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118 STORAGE115TESTINGRESTROOM 01114MOTHER'S ROOM108
MEN'SRESTROOM109
MDF/IDF111
MED ROOM 144CONFERENCE ROOM 145GROUP ROOM 04142GROUP ROOM 03140 RECOVERY116 CLIA STOR.117
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 07162 CLINICIAN'SOFFICE 10159
INTERNOFFICE 01153
GROUP ROOM 02141
CLINICIAN'SOFFICE 13135
LAUNDRY133
CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTING ROOM113VESTIBULE107 WOMEN'SRESTROOM110
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
WATER HEATER CLOSET132A
CLCLCLOPEN COLLAB.138A
CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 02169
CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 08161
AIR DISTRIBUTION:-RETURN/TRANSFER AIR GRILL, HARD LID: "TITUS" MODEL 350RL-SIDE WALL SUPPLY AIR DIFFUSER, HARD LID: "TITUS" MODEL 300RL ALL DUCT WORK MUST BE CONSTRUCTED FROM COMMERCIAL GRADE G60/G90GALVANIZED STEEL MEETING ASTM-A-653-96 STANDARD IN ACCORDANCE WITH THELATEST ADDITIONS OF THE SMACNA.1-PROVIDE DUCT TYPE SMOKE DETECTOR ON ALL SUPPLY AIR PLENUMS OF ALL RTUS.2-PROVIDE TITLE-24 APPROVED 365 DAYS PROGRAMMABLE THERMOSTATS, COORDINATELOCATIONS W/ ARCHITECT.4- 6"Ø DUCT FROM DRYER, TO 8X8 LOUVER (BY OTHERS), COORDINATE WITH ARCHITECT ANDG.C. THE EXHAUST DUCT SHALL NOT EXCEED A TOTAL COMBINED HORIZONTAL ANDVERTICAL LENGTH OF 14 FEET, INCLUDING TWO 90 DEGREE ELBOWS. A LENGTH OF 2 FEETSHALL BE DEDUCTED FOR EACH 90 DEGREE ELBOW IN EXCESS OF TWO. WE RECOMMENDTO HAVE DRYER IN PLACE OF PROPOSED WASHER TO BE CLOSER TO EXHAUST LOUVER.NEW 12"Ø BY PASS W/ MANUAL VOLUME DAMPER SET AT 460 CFM123NEW EXHAUST FAN TO BE INSTALLED IN PLACE OF EXISTING, MATCH LIKE FORLIKE, FIELD VERIFY4NEW 14"Ø OR EQUAL RECTANGULAR UTR., DEMO EXISTING RESTROOM EXHAUST FANAND INSTALL NEW PER SCHEDULE. PROVIDE NEW ROOF CURB. ROOFING BY OTHERS.5EXHAUST DISCHARGE FROM THE BUILDING MUST BE MIN. 10 FT AWAY FROM ANY AIRINTAKE TO THE BUILDING AND PROPERTY LINE.6 PROVIDE TITLE-24 APPROVED 365 DAYS PROGRAMMABLE THERMOSTATS, COORDINATELOCATIONS W/ ARCHITECT.5-MECHANICAL CONTRACTOR TO FIELD VERIFY AND LOCATE EXACT SUPPLY/ RETURN AIRPLENUMS COMING FROM THE ROOFTOP PACKAGES ON THE ROOF.3- 1 2
NEW 10"Ø BY PASS W/ MANUAL VOLUME DAMPER SET AT 350 CFM 3 4
56 7NEW SUPPLEMENTARY AC UNIT. COORDINATE FINAL LOCATION W/ G.C. PROVIDE ALLSERVICE ACCESS REQUIREMENTS. 7 8LINE SET REFRIGERANT UTR TO CU-1 ON THE ROOF. FIELD VERIFY FINAL LOCATION FORCU-1 AND PIPE ROUTING. 8 (EXISTING)ROOF TOP HEAT PUMPSPLIT SYSTEM CONDENSING UNIT(PROCESS LOAD) A/C UNITEXHAUST FANMECHANICAL CONTRACTOR TO PROVIDE SHOP DRAWING TO SAA FOR REVIEW .6-2X2 SUPPLY/RETURN AIR GRILLES: "TITUS" MODEL OMNI-AAALL AIR DEVICES MUST BE REVIEWED AND APPROVED BY ARCHITECT PRIOR TOPURCHASE.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:18 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 233
BLDG. ELECTRICAL ROOM
DW
(E) SFECOPEN COLLAB.138A
WATER HEATER CLOSET132A
HALLWAY150
HALLWAY138
HALLWAY119 HALLWAY106
WOMEN'SRESTROOM110
VESTIBULE107TESTING ROOM113TESTINGRESTROOM 02112CLINICIAN'SOFFICE 11131 CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 10130 CLINICIAN'SOFFICE 04120CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 01123 CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 05125LAUNDRY133 CLINICIAN'SOFFICE 13135
GROUP ROOM 02141
INTERNOFFICE 01153 CLINICIAN'SOFFICE 10159CLINICIAN'SOFFICE 09160CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 03170CLINICIAN'SOFFICE 02169 CLIA STOR117RECOVERY116
GROUP ROOM 03140GROUP ROOM 04142 CONFERENCE145MED ROOM144 MDF/IDF111
MEN'SRESTROOM109MOTHER'SROOM108TESTINGRESTROOM 01114STORAGE115 COPY ROOM118SUPERVISOROFFICE103CHECK IN105FINANCE104SECURITY102CLUBHOUSE174 TREATMENTOFFICE167
BLDG.JANITORS149
OPEN WORKCOLLABORATION154
CHILDCARE132
CLINICIAN'SOFFICE 12136
DOCTOR'SOFFICE137
GROUP ROOM 01139 STORAGE143 EXITVESTIBULE148STAFFBREAK ROOM147 SUPPLY/STORAGE/CHART151
INTERNOFFICE 01152
CLINICIAN'SOFFICE 11155CLINICIAN'SOFFICE 12156SERVICE CHIEFOFFICE157 PEER/MENTALHEALTH WORKERS158
LARGECONFERENCE163CLINICIAN'SOFFICE 01168GROUP ROOM 02171GROUP ROOM 01172CLIENTRESTROOM173 RESTROOM134SERVICE CHIEFOFFICE124 RECEPTION101 LOBBY100 PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-2.2HVAC ZONING PLAN1/8" = 1'-0" N
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:21 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 234
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-3.0TITLE-24 F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:23 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 235
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA M-3.1TITLE-24 333 City Blvd. West, Suite 300Orange CA 92826(714) 449-1646 M-33211(714) 449-1646333 City Blvd. West, Suite 300Orange CA 92826Engineered Spaces Inc.

Engineered Spaces Inc.

Fariborz Mozhgani
Fariborz Mozhgani
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\_HVAC\27141 Aliso Creek Rd., 1st Floor (OC-HCA) Mechanical.dwg, 8/28/2024 11:39:34 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 236
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA PLUMBING COVER SHEETP-1.1

LEGENDPLUMBING FIXTURE SCHEDULEPLUMBING NOTES

SHEET INDEX

PIPE MATERIAL SCHEDULE
············SCOPE OF WORK········

PLUMBING FIXTURE SCHEDULE

GENERAL NOTES

PLUMBING FIXTURE SCHEDULE NOTES
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-1 Plumbing Cover Sheet.dwg, 8/28/2024 11:38:21 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 237
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA PLUMBING DETAILSP-1.2 NONE
SCHEDULE FOR SINGLE PIPE HANGERS 3/4" THRU 6"

PIPE SUPPORT SPACING SCHEDULE
2 INSTA-HOT INSTALLATION DETAIL
TYPICAL COUNTER DETAIL14TYPICAL FIRESTOP PENETRATION DETAIL 3 1. WALL ASSEMBLY -- THE 1 OR 2 HR FIRE-RATED GYPSUM BOARD/STUD WALL ASSEMBLY SHALL BE CONSTRUCTED OF THE MATERIALS AND IN THE MANNERDESCRIBED IN THE INDIVIDUAL U300, U400 OR V400 SERIES WALL AND PARTITION DESIGN IN THE UL FIRE RESISTANCE DIRECTORY AND SHALL INCLUDE THEFOLLOWING CONSTRUCTION FEATURES:A. STUDS -- WALL FRAMING MAY CONSIST OF EITHER WOOD STUDS OR STEEL CHANNEL STUDS. WOOD STUDS TO CONSIST OF NOM 2 BY 4 IN. (51 BY 102 MM)LUMBER SPACED MAX 16 IN. (406 MM) OC. STEEL STUDS TO BE MIN 3-1/2 IN. (89 MM) DEEP, FABRICATED FROM 25 MSG GALV STEEL, SPACED MAX 24 IN. (610MM) OC.B. GYPSUM BOARD* -- THE GYPSUM BOARD TYPE, NUMBER OF LAYERS, FASTENER TYPE AND SHEET ORIENTATION SHALL BE AS SPECIFIED IN THE INDIVIDUALWALL AND PARTITION DESIGN. MAX DIAM OPENING IS 12 IN. (305 MM).THE HOURLY F RATING OF THE FIRESTOP SYSTEM IS EQUAL TO THE HOURLY FIRE RATING OF THE WALL ASSEMBLY IN WHICH IT IS INSTALLED.2. THROUGH PENETRANT -- ONE METALLIC PIPE, CONDUIT OR TUBE TO BE INSTALLED EITHER CONCENTRICALLY OR ECCENTRICALLY WITHIN THE FIRESTOPSYSTEM. THE MIN ANNULAR SPACE BETWEEN THE PIPE, CONDUIT OR TUBE AND THE PERIPHERY OF THE OPENING SHALL BE MIN 0 IN. (POINT CONTACT) TOMAX 7-7/8 IN. (200 MM). PIPE CONDUIT OR TUBE TO BE RIGIDLY SUPPORTED ON BOTH SIDES OF WALL ASSEMBLY. THE FOLLOWING TYPES AND SIZES OFMETALLIC PIPES, CONDUITS OR TUBES MAY BE USED:A. STEEL PIPE -- NOM 4 IN. (102 MM) DIAM (OR SMALLER) SCHEDULE 10 (OR HEAVIER) STEEL PIPE.B. IRON PIPE -- NOM 4IN. (102 MM) DIAM (OR SMALLER) CAST OR DUCTILE IRON PIPE.C. CONDUIT -- NOM 4 IN. (102 MM) DIAM (OR SMALLER) RIGID STEEL CONDUIT.D. CONDUIT -- NOM 4 IN. (102 MM) DIAM (OR SMALLER) STEEL ELECTRICAL METALLIC CONDUIT.E. COPPER TUBING -- NOM 4 IN. (102 MM) DIAM (OR SMALLER) TYPE L (OR HEAVIER) COPPER TUBING.F. COPPER PIPE -- NOM 4 IN. (102 MM) DIAM (OR SMALLER) REGULAR (OR HEAVIER) COPPER PIPE.3. FIRESTOP SYSTEM -- THE FIRESTOP SYSTEM SHALL CONSIST OF THE FOLLOWING:A. PACKING MATERIAL -- GLASS FIBER OR MINERAL WOOL BATT INSULATION FIRMLY PACKED WITHIN THE WALL CAVITY AROUND THE OPENING AS APERMANENT FORM.B. FILL, VOID OR CAVITY MATERIAL*-FOAM -- FILL MATERIAL APPLIED WITHIN ANNULUS FLUSH WITH BOTH SURFACES OF THE WALL. MIN FILL MATERIALTHICKNESS FOR 1 HR F RATING IS 4-3/4 IN. (121 MM). MIN FILL MATERIAL THICKNESS FOR 2 HR F RATING IS 6 IN. (152 MM).HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC -- CP 620 FIRE FOAM*BEARING THE UL CLASSIFICATION MARK Hilti Firestop SystemsA

A SECTION A-A
WL 1289System No. W-L-1289F Ratings -- 1 and 2 Hr (See Items 1 and 3)T Rating -- 0 HrL-RA TING AT AMBIENT = LESS THAN 1 CFM / SQ FTL Rating at Ambient -- Less Than 1 CFM/sq ftL Rating at 400 F -- Less Than 1 CFM/sq ftUL 1479 and CAN/ULC-S115 52-HOUR SLAB PENETRATION DETAIL
AA
F RATING - 2 HRT RATING - 2 HRANSI / UL1479 (ASTM E814)- 2 HR- 0 HR- 2 HR- 0 HRF RATINGFT RATINGFH RATINGFTH RATINGCAN / ULC S115

1. Wall Assembly -- The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner describedin the individual U300, U400 or V400 Series Wall and Partition Design in the UL Fire Resistance Directory and shall include the followingconstruction features:A. Studs -- Wall framing may consist of either wood studs or steel channel studs. Wood studs to consist of nom 2 by 4 in. (51 by 102 mm) lumber spaced max 16 in. (406 mm) OC. Steel studs to be min 3-1/2 in. (89 mm) deep, fabricated from 25 MSG galv steel,spaced max 24 in. (610 mm) OC.B. Gypsum Board* -- The gypsum board type, number of layers, fastener type and sheet orientation shall be as specified in the individual Wall and Partition Design. Max diam opening is 12 in. (305 mm). The hourly F Rating of the firestop system is equal to the hourly fire rating of the wall assembly in which it is installed.2. Through Penetrant -- One metallic pipe, conduit or tube to be installed either concentrically or eccentrically within the firestop system. Themin annular space between the pipe, conduit or tube and the periphery of the opening shall be min 0 in. (point contact) to max 7-7/8 in. (200mm). Pipe conduit or tube to be rigidly supported on both sides of wall assembly. The following types and sizes of metallic pipes, conduits ortubes may be used:A. Steel Pipe -- Nom 4 in. (102 mm) diam (or smaller) Schedule 10 (or heavier) steel pipe.B. Iron Pipe -- Nom 4in. (102 mm) diam (or smaller) cast or ductile iron pipe.C. Conduit -- Nom 4 in. (102 mm) diam (or smaller) rigid steel conduit.D. Conduit -- Nom 4 in. (102 mm) diam (or smaller) steel electrical metallic conduit.E. Copper Tubing -- Nom 4 in. (102 mm) diam (or smaller) Type L (or heavier) copper tubing.F. Copper Pipe -- Nom 4 in. (102 mm) diam (or smaller) Regular (or heavier) copper pipe.3. Firestop System -- The firestop system shall consist of the following:A. Packing Material -- Glass fiber or mineral wool batt insulation firmly packed within the wall cavity around the opening as a permanent form.B. Fill, Void or Cavity Material*-Foam -- Fill material applied within annulus flush with both surfaces of the wall. Min fill material thickness for 1 hr F Rating is 4-3/4 in. (121 mm). Min fill material thickness for 2 hr F Rating is 6 in. (152 mm).HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC -- CP 620 Fire Foam*Bearing the UL Classification Mark System No. F-A-1014
FA 1014
Hilti Firestop Systems
HOT WATER PIPING INSULATION DETAIL6
FIXED AIR GAP7

PIPE SUPPORT INSTALLATION DETAIL
RESIDENTIAL DISHWASHER HOOK-UP8
WALL CLEANOUT9
FLOOR CLEANOUT10
···
WATER HEATER DETAIL11
CONDENSATE DRAIN TO TAILPIECE12
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-1 Plumbing Cover Sheet.dwg, 8/28/2024 11:38:23 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 238
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA PLUMBING CUTSHEETS &P-1.3 Fariborz MozhganiEngineered Spaces Inc.333 City Blvd., West, Suite 300Orange CA 928682024-08-21M-33211(714) 449-1646 2024-08-28333 City Blvd., West, Suite 300Orange CA 92868(714) 449-1646 TITLE 24 CALCULATIONS
Engineered Spaces Inc.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-1 Plumbing Cover Sheet.dwg, 8/28/2024 11:38:26 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 239
(E) SFEC
+7 1/2" AFF
+45 3/4" AFF+37 3/4" AFF
FA
FE
ALARM

FAALARM FA
CHASE+14"
W/HW/H
+8 1/4" AFF
+8 1/4" AFFSURFACEMOUNTEDCHASE

SURFACEMOUNTEDCHASE
FE
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA DEMOLITION PLANP-2.1

AS NOTED
N

PLUMBING
NSCALE: 1/8" = 1'-0"PLUMBING - DEMOLITION PLAN1PLUMBING PLAN NOTES IMPORTANT BID NOTE:IT SHALL BE PLUMBING CONTRACTOR'S RESPONSIBILITY TO COORDINATE EXACT LOCATION OFRELOCATED CORE AREA RESTROOMS. PLUMBING CONTRACTOR SHALL INCLUDE IN HIS BASE BIDTHE INSTALLATION OF SEWER & VENT AND HOT & COLD WATER RISERS TO MAINTAIN CONTINUITYOF SERVICES FOR UPPER FLOORS. COORDINATE ALL PLUMBING SERVICES INTERRUPTIONS WITHBUILDING MANAGEMENT. INCLUDE AFTER-HOURS WORK AS PART OF BASE BID.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-2.1 Plumbing Plan.dwg, 8/28/2024 11:38:43 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 240

SFEC SFEC
SFEC
SFEC
SFEC
SFEC
SFEC
SFEC

SFEC SFECSFECSFEC
(E) SFEC
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA FIXTURE TYPESP-2.2

AS NOTEDPLUMBING
NSCALE: 1/8" = 1'-0"PLUMBING - FIXTURE TYPES1PLUMBING PLAN NOTES IMPORTANT BID NOTE:IT SHALL BE PLUMBING CONTRACTOR'S RESPONSIBILITY TO COORDINATE EXACT LOCATION OFRELOCATED CORE AREA RESTROOMS. PLUMBING CONTRACTOR SHALL INCLUDE IN HIS BASE BIDTHE INSTALLATION OF SEWER & VENT AND HOT & COLD WATER RISERS TO MAINTAIN CONTINUITYOF SERVICES FOR UPPER FLOORS. COORDINATE ALL PLUMBING SERVICES INTERRUPTIONS WITHBUILDING MANAGEMENT. INCLUDE AFTER-HOURS WORK AS PART OF BASE BID.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-2.2 Plumbing Plan.dwg, 8/28/2024 11:38:49 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 241

SFEC SFEC
SFEC
SFEC
SFEC
SFEC
SFEC
SFEC

SFEC SFECSFECSFEC
(E) SFEC
LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134
CLIENT RESTROOM173
GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152 SUPPLY/STORAGE/CHART151
STAFFBREAK ROOM147
EXITVESTIBULE148STORAGE143GROUP ROOM 01139
DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136
CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149TREATMENTOFFICE167
CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114 MOTHER'SROOM108 MEN'SRESTROOM109
MDF/IDF111
MED ROOM144CONFERENCE145GROUP ROOM 04142GROUP ROOM 03140 RECOVERY116
CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160 CLINICIAN'SOFFICE 10159INTERNOFFICE 01153
GROUP ROOM 02141
CLINICIAN'SOFFICE 13135
LAUNDRY133
CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTINGRESTROOM 02112TESTING ROOM113 VESTIBULE107WOMEN'SRESTROOM110
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
CLIA STOR117
WATER HEATER CLOSET132A
OPEN COLLAB.138A
GROUP ROOM 01172
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA SEWER & VENT PIPINGP-2.3

AS NOTEDPLUMBING PLAN
NSCALE: 1/8" = 1'-0"SEWER & VENT - PLUMBING PLAN1PLUMBING PLAN NOTES IMPORTANT BID NOTE:IT SHALL BE PLUMBING CONTRACTOR'S RESPONSIBILITY TO COORDINATE EXACT LOCATION OFRELOCATED CORE AREA RESTROOMS. PLUMBING CONTRACTOR SHALL INCLUDE IN HIS BASE BIDTHE INSTALLATION OF SEWER & VENT AND HOT & COLD WATER RISERS TO MAINTAIN CONTINUITYOF SERVICES FOR UPPER FLOORS. COORDINATE ALL PLUMBING SERVICES INTERRUPTIONS WITHBUILDING MANAGEMENT. INCLUDE AFTER-HOURS WORK AS PART OF BASE BID.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-2.2 Plumbing Plan.dwg, 8/28/2024 11:38:51 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 242

SFEC SFEC
SFEC
SFEC
SFEC
SFEC
SFEC
SFEC

SFEC SFECSFECSFEC
(E) SFEC
LOBBY100RECEPTION101SERVICE CHIEFOFFICE124RESTROOM134
CLIENT RESTROOM173
GROUP ROOM 02171CLINICIAN'SOFFICE 01168 LARGECONFERENCE163 PEER/MENTALHEALTH WORKERS158
SERVICE CHIEFOFFICE157CLINICIAN'SOFFICE 12156CLINICIAN'SOFFICE 11155INTERNOFFICE 01152 SUPPLY/STORAGE/CHART151
STAFFBREAK ROOM147
EXITVESTIBULE148STORAGE143GROUP ROOM 01139
DOCTOR'SOFFICE137CLINICIAN'SOFFICE 12136
CHILDCARE132
OPEN WORKCOLLABORATION154
BLDG.JANITORS149TREATMENTOFFICE167
CLUBHOUSE174
SECURITY102FINANCE104CHECK IN105SUPERVISOROFFICE103COPY ROOM118STORAGE115TESTINGRESTROOM 01114 MOTHER'SROOM108 MEN'SRESTROOM109
MDF/IDF111
MED ROOM144CONFERENCE145GROUP ROOM 04142GROUP ROOM 03140 RECOVERY116
CLINICIAN'SOFFICE 02169CLINICIAN'SOFFICE 03170
CLINICIAN'SOFFICE 04166CLINICIAN'SOFFICE 05165CLINICIAN'SOFFICE 06164CLINICIAN'SOFFICE 08161CLINICIAN'SOFFICE 07162CLINICIAN'SOFFICE 09160 CLINICIAN'SOFFICE 10159INTERNOFFICE 01153
GROUP ROOM 02141
CLINICIAN'SOFFICE 13135
LAUNDRY133
CLINICIAN'SOFFICE 05125CLINICIAN'SOFFICE 06126CLINICIAN'SOFFICE 07127CLINICIAN'SOFFICE 01123CLINICIAN'SOFFICE 02122CLINICIAN'SOFFICE 03121CLINICIAN'SOFFICE 04120 CLINICIAN'SOFFICE 10130CLINICIAN'SOFFICE 09129CLINICIAN'SOFFICE 08128CLINICIAN'SOFFICE 11131 TESTINGRESTROOM 02112TESTING ROOM113 VESTIBULE107WOMEN'SRESTROOM110
HALLWAY106HALLWAY119
HALLWAY138
HALLWAY150
CLIA STOR117
WATER HEATER CLOSET132A
OPEN COLLAB.138A
GROUP ROOM 01172

AS NOTED
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA N
HOT & COLD WATER PIPINGP-2.4PLUMBING PLAN
SCALE: 1/8" = 1'-0"HOT & COLD WATER - PLUMBING PLAN1PLUMBING PLAN NOTES IMPORTANT BID NOTE:IT SHALL BE PLUMBING CONTRACTOR'S RESPONSIBILITY TO COORDINATE EXACT LOCATION OFRELOCATED CORE AREA RESTROOMS. PLUMBING CONTRACTOR SHALL INCLUDE IN HIS BASE BIDTHE INSTALLATION OF SEWER & VENT AND HOT & COLD WATER RISERS TO MAINTAIN CONTINUITYOF SERVICES FOR UPPER FLOORS. COORDINATE ALL PLUMBING SERVICES INTERRUPTIONS WITHBUILDING MANAGEMENT. INCLUDE AFTER-HOURS WORK AS PART OF BASE BID.

F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-2.2 Plumbing Plan.dwg, 8/28/2024 11:38:54 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 243
PROJECT:

DATE:DRAWN:SCALE:PROJECT NO:REVIEWED:

SHEET NO:SHEET TITLE:

STAMP AND SIGNATURE:CONSULTANTS:

DATEDESCRIPTION DELTADRAWINGS ISSUE
6083 Bristol ParkwayCulver City, CA 90230515 South Flower St., Suite 1200Los Angeles, CA 9007118600 MacArthur Blvd., Suite 100 Irvine, CA 92612485C US Route 1 South, Suite 105Iselin, NJ 08830www.saaia.com T 310.553.3252T 213.929.1400T 949.724.8958San Francisco, CA 94105T 415.390.6793T 848.200.1200New York, NY 10017T 917.512.6688575 Market St., Suite 502711 3rd Ave., 6th Floor OWNERSHIP AND USE OF DOCUMENTS ALL DRAWINGS, SPECIFICATIONS AND COPIES THEREOF FURNISHED BY SAA INTERIORS ARE AND SHALLREMAIN IT'S PROPERTY. THEY ARE TO BE USED ONLY WITH RESPECT TO THIS PROJECT. FEDERAL LAW PROHIBITS THE REPRODUCTION, DISPLAY, SALE,OR OTHER DISPOSITION OF THIS DOCUMENT WITHOUT THE EXPRESS WRITTEN CONSENT OF SHLEMMER ALGAZE ASSOCIATES.COPYRIGHT © 2015 SHLEMMER ALGAZE ASSOCIATES ALL RIGHTS RESERVED CULVER CITY, CA • IRVINE, CA • LOS ANGELES, CASAN FRANCISCO, CA • ISELIN, NJ • NEW YORK, NY IF DRAWINGS AND MATERIALS DEVELOPED AND PROVIDED BY SAA INTERIORS + ARCHITECTURE AT THE TIME OF AND RELATING TO COVID-19 CONTAINRECOMMENDATIONS FROM THE CENTER FOR DISEASE CONTROL AND PREVENTION (CDC) AND THE WORLD HEALTH ORGANIZATION (WHO), SUCHRECOMMENDATIONS ARE ONLY VALID AS OF THE DATE THE DRAWINGS AND MATERIALS ARE PRODUCED. THE CDC AND/OR WHO MAY UPDATE OR MODIFYTHEIR RECOMMENDATIONS AT ANY TIME PER THEIR DISCRETION. IN USING RECOMMENDATIONS FROM THESE DRAWINGS AND MATERIALS, THE RECIPIENTACKNOWLEDGES THAT IT WAS BASED ON THEIR OWN DECISION AND TAKE FULL RESPONSIBILITY AND LIABILITY. THE INTENDED RECIPIENT INDEMNIFIES ANDDEFENDS SAA FOR ANY USE OF THESE DRAWINGS AND MATERIALS BY OTHERS. SAA'S SERVICES ARE INTENDED TO ONLY BE OF ASSISTANCE AND GUIDANCE FOROUR CLIENT'S STRATEGIES AND DO NOT CONSTITUTE AS REQUIREMENTS OR ANY FORM OF HEALTH, ILLNESS OR DISEASE ADVICE. SAA MAKES NOREPRESENTATIONS OR WARRANTIES REGARDING THE ACCURACY OR COMPLETENESS OF THE DRAWINGS AND MATERIALS. ANY RECOMMENDATIONS OR USE OFANY CDC OR WHO INFORMATION DOES NOT CONSTITUTE ENDORSEMENT BY THE U.S. GOVERNMENT, DEPARTMENT OF HEALTH AND HUMAN SERVICES OR THECDC AND WHO NOR ITS AFFILIATES.

ALISO VIEJO, CA 92656 27141 ALISO CREEK RD.1ST FLOOROC-HCA 08/06/24CadSorin A. Brie635036
Electrical Mechanical Plumbing 333 City Blvd. West, Suite 300Orange CA 92826officefax(714) 449-1646(714) 449-1946Consulting Engineers "OC-HCA" Suite 100 27141 Aliso Creek Rd., Aliso Viejo CA AS NOTEDSPECIFICATIONSP-3PLUMBING
F:\Projects\Aliso Viejo\Aliso Creek Rd\27141 Aliso Creek Rd\01\Suite 100 (OC-HCA)\27141 Aliso Creek Rd., 1st Floor (OC-HCA) P-3 Plumbing Specifications.dwg, 8/28/2024 11:39:00 AM 08/16/24ISSUE FOR ENGINEERING08/29/24ISSUE FOR PLAN CHECK 244
City of Aliso Viejo

AGENDA ITEM
DATE: December 4, 2024
TO: Mayor and City Council
FROM: Mitzi Ortiz, City Manager
SUBJECT: CITY COUNCIL REORGANIZATION
Recommended Action:

Select a Mayor and Mayor Pro Tem in accordance with Ordinance No. 2001-022, for the 2025 calendar year.

Fiscal Impact:

There is no fiscal impact to this action.

Background:

Ordinance No. 2001-022 provides for the selection of the Mayor and Mayor Pro Tem on an annual basis at the first meeting of the City Council in December of each year with their terms commencing on January 1st the following year.

Discussion:

To conduct the selection of the next Mayor and Mayor Pro Tem, the following steps are recommended:
 The City Clerk calls for a motion to nominate a member of the City Council to serve as Mayor for 2025.
 The City Clerk requests any additional nominations.
 Nominations are closed.
 A roll call vote is taken by the City Clerk for each nominee until a successful nominee receives a majority vote and is declared Mayor.

The process is then repeated for the position of Mayor Pro Tem.

Additionally, Council Policy 400-2 states that the Council seating order shall be at the discretion of the Mayor.
245
City of Aliso Viejo

AGENDA ITEM
DATE: December 4, 2024
TO: Mayor and City Council
FROM: Mitzi Ortiz, City Manager
SUBJECT: CITY COUNCIL APPOINTMENTS TO SERVE ON REGIONAL BOARDS,

COMMISSIONS AND COMMITTEES
Recommended Action:

1. Review and update Council appointment list to regional boards, commissions, and committees; and

2. Adopt a Resolution designating and appointing the City’s representative to the Orange County Fire Authority Board of Directors.

Fiscal Impact:

None.

Background:

Councilmembers serve on various regional boards, commissions, and committees in order to represent the interests of the City of Aliso Viejo. The City Council traditionally reviews these appointments each year, following Council reorganization.

Discussion:

Staff recommends the City Council discuss and update the appointments for the 2025 calendar year. The current appointment list is included as Attachment No. 1 and indicates appointment vacancies due to the results of the 2024 General Municipal Election.

Changes to the OCFA delegate appointment must be formalized by Resolution, which is included as Attachment No. 2.

The following agency requires the Mayor to serve as the delegate; therefore, the appointment is automatic:

REGIONAL APPOINTMENTS
LOCC – OC Division City Selection Committee Mayor
246