5. Soltek-ECC A Joint Venture Proposal — Anaheim City Council, August 9, 2022 (part 2 of 2)

EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A 98557C (Rev. R - 11/20)
Installation/Care/Use Manual
ezH2O® In Wall Bottle Filling Station
To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK

YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE CODES. After installation, leave these instructions inside the fountain for future reference.

IMPORTANT

ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE.

THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO

A FOUNTAIN, CREATING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE

MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM. WE SUGGEST THAT THE BOTTLE FILLER BE PROTECTED BY A GROUND FAULT CIRCUIT

INTERRUPTER (GFCI)
Fig. 2Fig. 1
Installer
LZWSM8* LZWSMD* LZWSM8P* LZWSMDP* EZWSM8* EZWSMD* EZWSM8P* EZWSMDP* 1/4” O.D. TUBE

WATER INLET

TO COOLER
3/8” O.D. TUBE CONNECT

COLD WATER SUPPLY

BUILDING WATER
INLET
NOTE: WATERFLOW

DIRECTION SERVICE STOP
(NOT FURNISHED)
B CA

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE IS SECURED

IN POSITION

PUSH IN COLLET

TO RELEASE TUBE

OPERATION OF QUICK CONNECT FITTINGS

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

TUBE TO ATTACH

TUBE IS SECURED

IN POSITION

PUSH IN COLLET

TO RELEASE TUBE

PUSHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

RELEASE TUBE
A B C
ELKA¥@
(-- t..:....l )
-
..
-6
~
~ Jj
EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A

Page 2 ends

98557C (Rev. R - 11/20)
LZWSM8*, LZWSMD* EZWSM8*, EZWSMD* ROUGH-IN
Fig. 3
20 3/8"518mm
20 7/16"519mm
19 3/4"502mm
17 3/8"441mm 1 3/16"30mm1 3/16"30mm
8 1/8"206mm
9 3/8"238mm
1 1/8"29mm
3"79mm
18 3/4"476mm
4"102mm

FILTER LOCATION
1/4" O.D. TUBE CONNECT
(CHILLER WATER OUTLET)
3/8" O.D. TUBE CONNECT
(CHILLER WATER INLET)

SHUT OFF VALVE BY OTHERS

BACK WALL LINE
8" 203MM MINIMUM

FOR DRAIN CONNECTION

AND ACCESS TO

BOTTLE FILLER

ELECTRICALS

FINISHED FLOOR
25 1/4"642mm
27"682mm
2 7/8"73mm
25 7/8"657mm
1-1/4" (32MM)

WASTE TUBE

FURNISHED
3 1/2"89mm
4 1/2"117mm
1 1/8"29mm
11"279mm

ELECTRICAL
INLET

FINISHED FLOOR
DOUBLE STUD OR 3" (76mm)

BETWEEN MOUNTING FRAMES

IF PLACED NEXT TO ANOTHER

FOUNTAIN OR WALL
32 11/16"831mm

ACTIVATION
SENSOR
38 7/8987mm
NOTE: NON-REFRIGERATED

MODELS (WITHOUT CHILLER)

DO NOT INCLUDE LOUVERS

JUNCTION BOX

LOCATION
27 3/8"693.74MM
I I
I I
I I
I I 1l1l1l
, 'UUUj'
I I
---'-----------1 I ~i l
I 1-j I I
I I

Page 3 ends

EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A 98557C (Rev. R - 11/20)
LZWSM8P*, LZWSMDP* EZWSM8P*, EZWSMDP* ROUGH-IN
Fig. 4
8 1/8"206mm
9 3/8"238mm
1 1/8"29mm
3"79mm
18 3/4"476mm
4"102mm

FILTER LOCATION
1/4" O.D. TUBE CONNECT
(CHILLER WATER OUTLET)
3/8" O.D. TUBE CONNECT
(CHILLER WATER INLET)

SHUT OFF VALVE BY OTHERS

BACK WALL LINE

FINISHED FLOOR
25 1/4"642mm
27"682mm
2 7/8"73mm
25 7/8"657mm
1-1/4" (32MM)

WASTE TUBE

FURNISHED
3 1/2"89mm
4 1/2"117mm
1 1/8"29mm
11"279mm

ELECTRICAL
INLET

FINISHED FLOOR
17 3/8"441mm 1 3/16"30mm1 3/16"30mm
19 3/4"502mm
21 15/16"557mm
38 7/8"988mm
18 7/8"481mm
DOUBLE STUD OR 3" (76mm)

BETWEEN MOUNTING FRAMES

IF PLACED NEXT TO ANOTHER
FOUNTAIN OR WALL.

ACTIVATION
SENSOR
32 11/16831mm
NOTE: NON-REFRIGERATED

MODELS (WITHOUT CHILLER)

DO NOT INCLUDE LOUVERS
27 3/8"693.74MM
8 203.2MM MINIMUM

FOR DRAIN CONNECTION

AND ACCESS TO

BOTTLE FILLER

ELECTRICALS

JUNCTION BOX

LOCATION
-j I I
I II
I I
I I
1 l1 11 l
( } I J I II I
I !I II I
uuuj·
EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A

Page 4 ends

98557C (Rev. R - 11/20)

INSTALLATION INSTRUCTIONS

1. Install mounting frame and chiller shelf. See mounting frame instructions.

2. Mount the upper BF panel to the mounting frame: Mount upper panel by aligning holes in the hinge brackets with holes in the mounting frame (three places). Mount with adequate size screws (not provided). Close the door and verify that the lock brackets on the side and bottom of the panel align with the slots on the mounting frame. Also verify that the panel is hanging high enough that it covers the top of the mounting frame.

3. Mount the lower Chiller panel to the mounting frame: Mount the lower panel by aligning holes in the hinge brackets with holes in the mounting frame (three places). Mount with adequate size screws (not provided). Close the door and verify that the lock brackets on the side of the panel align with the slots on the mounting frame. If adjustments need to be made, open the doors to make adjustments. Open panels for adjustments.

Loosen the (4) screws on the hinges of each panel and adjust accordingly and then re-tighten screws. Close and Lock the top panel in place using two set screws (provided) on the side of the panel, and a ¼ x 20 bolt through the front of the panel into the nut in the frame.

4. Attach drain: Attach the drain fittings to drain tube. Attach elbow to p-trap and cut waste tube to required length using plumbing hardware and trap as a guide.

5. Install remote chiller: See chiller instructions. Remove protective caps from water lines on chiller.

TO BOTTLE FILLER

CHILLER
INLET

PLUMBING DIAGRAM
Fig. 6
EWF3000 WATERSENTRY PLUS FILTER INSTALLATION (Fig. 6): (Filter units only. For non-filtered units proceed to step 15) NOTICE: Do not use water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

CAUTION: If supply pressure will ever exceed 100 psi, install a pressure regulator set to 100 psi or below.

DO NOT ATTACH HOT WATER LINE TO FILTER HEAD.

Filter kits must be installed in compliance with all state and local laws and regulations governing the installation and use of this product.

Maximum inlet water temperature: 100°F (38°C).

See filter instructions for filter head assembly.

6. Connect Filter Kit: Using the filter mounting bracket and screws supplied, mount filter head using the (3) screw holes on the side of the chiller.

Allow enough room under the filter head for the installation and removal of the filter cartridge (13” minimum). To make tube connections on the filter head, loosen locknut. Push the tube end past both O-rings to a positive stop in the filter head recess - approx. 1". Screw the locknut hand tight to seal (See Fig. 5). Ends of tubing must be cut square and free of burrs and sharp ends that could cut or nick the O-rings.

7. Connect filter water outlet: Connect the outlet of the filter head to the inlet of the chiller using the ¼” O.D. poly tubing and ¼” elbow union supplied.

8. Place Chiller on Shelf: When mounting unit in a cavity or behind a wall maintain a minimum space of 4” (102mm) on top, sides and a depth of 12” (305mm).

9. Connect bottle filter line: Connect water line from BF station by inserting the ¼” O.D. poly tubing into union on the chiller outlet.

10. Remove Chiller Front panel: Remove the (10) screws securing chiller front panel.

NOTE: SCREW THE LOCK-

NUT HAND TIGHT TO SEAL
Fig. 5
FILTER

CHILLER

TO BOTTLE FILLER
INLET

STRAINER

NON FILTEREDFILTERED
~ .
j l~ = = = = "======' "======"
~ !~ = "======"
= "======"
~ p l = = · = = .

Page 5 ends

EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A 98557C (Rev. R - 11/20)

11. Connect electrical to chiller: Make sure power supply is identical in voltage, cycle and phase to that specified on cooler serial plate. Never wire Compressor directly to the power supply. While chiller panel is off, adjust cold control if needed.

12. Replace chiller panel: Using the (10) screws re-secure the panel.

13. Plug bottle filler into wall box receptacle.

14. Install a shut-off valve: Install a shut-off valve and union connection to building water supply (valve and union not provided). Connect 3/8” shut-off valve to 3/8” copper tubing inlet of filter head.

15. Install filter cartridge: remove filter from carton, remove protective cap, and attach filter to filter head by firmly inserting into head and rotating filter clockwise.

16. Go to step 18.

EWF3000 WATERSENTRY STRAINER INSTALLATION (Fig. 6):

17. For non-filtered units: Install a shut-off valve and union connection to building water supply (valve and union not provided). Turn on the water supply and flush the line thoroughly. Turn off water supply. Install the in-line strainer between the valve and the chiller. The in-line strainer is not installed on filtered units.

18. Connect water supply line: Connect 3/8” shut-off valve to 3/8” copper tubing to inlet of strainer. Connect water line from BF station by inserting the ¼” O.D. poly tubing into union on the chiller outlet. Turn on water supply and check for leaks.

19. Place Chiller on Shelf: When mounting unit in a cavity or behind a wall maintain a minimum space of 4” (102mm) on top, sides and a depth of 12” (305mm).

20. Remove Chiller Front panel:Remove the (10) screws securing chiller front panel.

21. Connect electrical to chiller: Make sure power supply is identical in voltage, cycle and phase to that specified on cooler serial plate. Never wire Compressor directly to the power supply. While chiller panel is off, adjust cold control if needed. Replace chiller panel: Using the (10) screws re-secure the panel.

22. Turn on water supply: Turn on the water supply, plug unit into wall (power cord not supplied on 220V models) and activate the electronic eye on in-wall bottle filler until approximately 1 gallon of water is dispensed. Be sure to reinstall fuse to the circuit or switch the circuit breaker back to the “ON” position. Once power is applied to Bottle Filler, the GREEN LED LIGHT and/or LCD Bottle Counter should illuminate, the green light showing good filter status Please. note that the electric eye activation times out at 20 seconds and will need to be activated repeatedly until 1 gallon has been passed. This flushing procedure purges air and fine carbon particles from filter and strainer. When 1 gallon of water has been purged through the bottle filler, carefully inspect all water connections for leaks.

23. Verify proper dispensing by placing cup, hand, or any opaque object in front of sensor area and verify water dispenses.

24. Close and lock the lower panel in place using two set screws (provided) on the side of the panel.

25. Installation Complete.

MOUNTING FRAME

CHILLER

FILTER LOCATION
(OPTIONAL)

HINGE BRACKETS

DRAIN LOCATION

UPPER PANEL

LOWER PANEL
Fig. 7

WALL BOX RECEPTACLE

JUNCTION BOX

LOCATION
EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A

Page 6 ends

98557C (Rev. R - 11/20)
BF6-BF7-BF8 PROGRAMS

SETTING THE CONTROL BOARD

VERIFY CONTROL BOARD SOFTWARE
1) To verify the software program of the control board the unit will need to be shut down and restarted. The chiller (if present) does not need to be shut down and restarted. 2) The units lower panel must be open to access the power cord and wall outlet.
3) Shut down the unit by unplugging the power cord from the wall outlet.
4) Restart the unit by plugging the power cord back into the wall outlet.
5) Upon start up the bottle count display will show the software designation of BF6, BF7, BF8, BF9 or BF11.
6) Reference the BF6-BF7-BF8-BF9 or BF11 instructions for setting the control board.

ACCESSING THE PROGRAMMING BUTTON
1) To access the program button the lower panel of the unit must be must be opened. The programming button is
located at the bottom right corner of the upper panel.

This area of the unit is concealed by the lower panel.

RESET THE FILTER MONITOR
1) Instructions apply to filtered units only.
2) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through three messages:
“RST FLTR” – Reset Filter Status LED
“RST BCNT” – Reset Bottle Count
“RNG SET” – Range Set for IR Sensor
If the program button is not pushed again the display
will scroll through the three messages above for
three cycles and then default back to bottle count and
be back in run mode.
3) When the display changes to "RST FLTR", depress
the button again. The display will change to show
"FLT=". Depress the button again and the display will
show "FLTR=0".
4) The green LED should now be illuminated indicating
that the visual filter monitor has been reset.

SETTING RANGE OF THE IR SENSOR
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through three messages:
“RST FLTR” – Reset Filter Status LED
“RST BCNT” – Reset Bottle Count
“RNG SET” – Range Set for IR Sensor
2) If the program button is not pushed again the display will scroll through the two messages above for
three cycles and then default back to bottle count
and be back in run mode.
3) When display shows “RNG SET” push program button
once the display will show current value
(can be 1 – 10) e.g. “RNG = 3”.
4) Once display shows current value push the program
button to scroll through value of 1 – 10. Select the
desired range setting.
5) Once range is selected allow approximately 4 seconds to pass and then the display will go back to bottle counter and be in run mode.
6) Test bottle filler by placing bottle or hand in front of sensor to make sure water is dispensed.

RESETTING BOTTLE COUNT
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“RST BCNT” – Reset Bottle Count
“RNG SET” – Range Set for IR Sensor
If the program button is not pushed again the display
will scroll through the two messages above for
three cycles and then default back to bottle count
and be back in run mode.
2) When the display changes to "RST BCNT", depress the button again. The display will change to show current
bottle count value e.g. "00033183".
3) Depress the button again and the display will change to "BTLCT=0" for approximately 2 seconds and then return
to run mode displaying 00000000.
4) You can test the bottle counter by running water
approximately 5 seconds to see bottle counter advance 1.

Page 7 ends

EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A 98557C (Rev. R - 11/20)

ACCESSING THE PROGRAMMING BUTTON
1) To access the program button the lower panel of the unit must be must be opened. The programming button is
located at the bottom right corner of the upper panel.

This area of the unit is concealed by the lower panel.

RESET THE FILTER MONITOR
1) Instructions apply to filtered units only.
2) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Monitor
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display
will scroll through the two messages above for
three cycles and then default back to bottle count and
be back in run mode.
3) When the display changes to “RST FLTR”, depress
the button again. The display will change to show
“FLTR =”. Depress the button again and the display
will show “FLTR =0”
4) The Green LED should be illuminated indicating that
the visual filter monitor has been reset.

SETTING RANGE OF THE IR SENSOR
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display
will scroll through the two messages above for
three cycles and then default back to bottle count
and be back in run mode.
2) When the display changes to “SETTINGS”, depress
the button again. The display will change to show
“RNG SET“- Range set for IR sensor.
“UNIT TYP“ - Type of unit (REFRIG or NON-RFRG)
“RST BCNT“ - Reset bottle count
3) When display shows “RNG SET” push program
button once the display will show current value
(can be 1 – 10) e.g. “RNG = 3”.
4) Once display shows current value push the
program button to scroll through value of 1 – 10.

Select the desired range setting.
5) Once range is selected allow approximately
4 seconds to pass and then the display will go
back to bottle counter and be in run mode.
6) Test bottle filler by placing bottle or hand in front of sensor to make sure water is dispensed.

SETTING UNIT TYPE
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display
will scroll through the two messages above for
three cycles and then default back to bottle count
and be back in run mode.
2) When the display changes to “SETTINGS”, depress
the button again. The display will change to show
“RNG SET“- Range set for IR sensor.
“UNIT TYP“ - Type of unit (REFRIG or NON-RFRG)
“RST BCNT“ - Reset bottle count
3) When display shows “UNIT TYPE” push program
button once the display will show current value
Can be REFRIG or NON-RFRG
4) Push button once to change value. Once value is
selected the display will show the new value.
(Can be REFRIG or NON-RFRG)
“REFRIG“ - stands for refrigerated product. In this
setting the flow rate is estimated at 1.0 gallon per minute. “NON-RFRG“ - stands for nonrefrigerated product.

In this setting the flow rate is estimated
at 1.5 gallons per minute.

Both “REFRIG“ and “NON-RFRG“ simulate
1 bottle equal to 20 oz.
5) Allow approximately 4 seconds to pass and the display will return to bottle counter and be in run mode.

RESETTING BOTTLE COUNT
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display
will scroll through the two messages above for
three cycles and then default back to bottle count
and be back in run mode.
2) When the display changes to “SETTINGS”, depress
the button again. The display will change to show
“RNG SET“- Range set for IR sensor.
“UNIT TYP“ - Type of unit (REFRIG or NON-RFRG)
“RST BCNT“ - Reset bottle count
If the button is not pushed again the display will scroll through the three messages above for the cycles and
return to run mode.
3) When display shows “RST BCNT” push program button
once the display will show current value e.g. “00033183”. 4) Once display shows current value push the program
button once more to reset back to 0. The display will
show BTLCT = 0 for approximately 2 seconds and
then return to run mode showing 00000000 bottles.
5) Testing the bottle counter:

REFRIG units: Place bottle or hand in front of sensor
for 9.4 seconds to see bottle counter count 00000001.
(This is based on filling a 20 oz. bottle)
NON-RFRG units: Place bottle or hand in front of sensor for 6.25 seconds to see bottle counter count 00000001.
(This is based on filling a 20 oz bottle)
BF9 PROGRAM

SETTING THE CONTROL BOARD
EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A

Page 8 ends

98557C (Rev. R - 11/20)

VERIFY CONTROL BOARD SOFTWARE
1) To verify the software program of the control board the unit will need to be shut down and restarted. The chiller (if present) does not need to be shut down and restarted.
2) The units lower panel must be open to access the power cord and wall outlet.
3) Shut down the unit by unplugging the power cord from the wall outlet or switching off the circuit breaker to the unit. 4) Restart the unit by plugging the power cord back into the wall outlet or by switching on the circuit breaker to the unit. 5) Upon start up, the bottle count display will show the software designation of BF11 or BF12.

ACCESSING THE PROGRAMMING BUTTON
1)
To access the program button, open the lower panel. Reset button is located at the lower right hand side of the top panel.

RESET THE FILTER MONITOR
1) Instructions apply to filtered units only.
2) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Monitor
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display will scroll through the two messages above for three cycles and then default back to bottle count and be back in run mode.
3) When the display changes to “RST FLTR”, depress the button again. The display will change to show “FLTR =”. Depress the button again and the display will show “FLTR =0”
4) The Green LED should be illuminated indicating that the visual filter monitor has been reset.

SETTING RANGE OF THE IR SENSOR
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display will scroll through the two messages above for three cycles and then default back to bottle count and be back in run mode.
2) When the display changes to “SETTINGS”, depress the button again. The display will change to show
“RNG SET” - Range set for IR sensor.
“UNIT TYP” - Type of unit (REFRIG or NON-RFRG)
“FLT SIZE” - Select filter capacity
“RST BCNT” - Reset bottle count
3) When display shows “RNG SET” push program button once the display will show current value (can be 1 – 10) e.g. “RNG = 3”. 4) Once display shows current value push the program button to scroll through value of 1 – 10. Select the desired range setting, "1" being closest to sensor and "10" being farthest away. 5) Once range is selected allow approximately 4 seconds to pass and then the display will go back to bottle counter and be in run mode. 6) Test bottle filler by placing bottle or hand in front of sensor to make sure water is dispensed.

Continued from below:
2) When the display changes to “SETTINGS”, depress the button again.

The display will change to show
“RNG SET” - Range set for IR sensor.
“UNIT TYP” - Type of unit (REFRIG or NON-RFRG)
“FLT SIZE” - Select filter capacity
“RST BCNT” - Reset bottle count
3) When display shows “UNIT TYPE” push program button once the display will show current value. Can be REFRIG or NON-RFRG 4) Push button once to change value. Once value is selected the display will show the new value. (Can be REFRIG or NON-RFRG)
“REFRIG“ - stands for refrigerated product. In this setting the flow rate is estimated at 1.0 gallon per minute.
“NON-RFRG“ - stands for nonrefrigerated product. In this setting the flow rate is estimated at 1.5 gallons per minute. Both “REFRIG“ and “NON-RFRG“ simulate 1 bottle equal to 20 oz.
5) Allow approximately 4 seconds to pass and the display will return to bottle counter and be in run mode.

The display will change to show:
“RNG SET”- Range set for IR sensor.
“UNIT TYP” - Type of unit (REFRIG or NON-RFRG)
“FLT SIZE” - Select filter capacity
“RST BCNT” - Reset bottle count
If the button is not pushed again the display will scroll through the four messages above for three cycles and return to run mode. 3) When display shows “RST BCNT” push program button once the display will show current value, e.g. “0033183”.
4) Once display shows current value push the program button once more to reset back to 0. The display will show BTLCT = 0 for approximately 2 seconds and then return to run mode showing 00000000 bottles.

NOTE: Once the bottle count is reset to zero there is no way to return to the previous bottle count.
5) Testing the bottle counter:

REFRIG units: Place bottle or hand in front of sensor for approximately 9 seconds to see bottle counter count 00000001,
(This is based on filling a 20 oz. bottle).

NON-RFRG units: Place bottle or hand in front of sensor for approximately 6 seconds to see bottle counter count 00000001, (This is based on filling a 20 oz bottle).

SETTING FILTER CAPACITY
1) Depress the program button for approximately 2 seconds until the display changes then release. The display will change and scroll through two messages:
“RST FLTR” – Reset Filter Status LED
“SETTINGS” – System Settings Sub Menu
If the program button is not pushed again the display will scroll through the two messages above for three cycles and then default back to bottle count and be back in run mode.
2) When the display changes to “SETTINGS”, depress the button again.

The display will change to show:
“RNG SET“- Range set for IR sensor.
“UNIT TYP“ - Type of unit (REFRIG or NON-RFRG)
“FLT SIZE” - Select filter capacity
“RST BCNT“ - Reset bottle count
If the button is not pushed again the display will scroll through the four messages above for three cycles and return to run mode. 3) When display shows “FLT SIZE” push program button once. The display will show current value. Can be 3000GAL or 6000GAL.
4) Push program button again to display the desired “FLT SIZE”. 5) Allow approximately 4 seconds to pass and the display will return to bottle counter and be in run mode.

BF11 - BF12 PROGRAM

SETTING THE CONTROL BOARD

Page 9 ends

EZWSMD*1A EZWSM8*1A EZWSM8*2A LZWSMD*1A LZWSM8*1A LZWSM8*2A 98557C (Rev. R - 11/20)
2,3
1 3
3 2,3

WATER FILTER EXPLODED VIEW
Fig. 8
PRINTED IN U.S.A.

IMPRESO EN LOS E.E.U.U.

IMPRIMÉ AUX É.-U.

FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.834.4816 PARA PIEZAS, CONTACTE A SU DISTRIBUIDOR LOCAL O LLAME AL 1.800.834.4816 POUR OBTENIR DES PIÈCES, CONTACTEZ VOTRE DISTRIBUTEUR LOCAL OU COMPOSEZ LE 1.800.834.4816 ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 • www.elkay.com REPAIR SERVICE INFORMATION TOLL FREE NUMBER 1.800.260.6640 NÚMERO GRATIS DE SERVICIO 1.800.260.6640
INFORMATIONS POUR LE SERVICE PAR NUMERO SANS FRAIS 1.800.260.6640

DESCRIPTION
98543C
98544C
98545C
98546C
98549C
98631C
98632C
Kit - Electrical Package
Kit - EE Sensor
Kit - Solenoid Valve Replacement
Kit - Aerator Replacement
Kit - Hardware & Waterway Parts
Kit - Electrical Package 220V
Kit - Solenoid Valve Replacement 220V

REPLACEMENT PART KITS
PART NO.

ITEM
NO.

Filter Assy-3000 Gal.

Kit-Filter Head Fittings-includes John Guest
Fittings
Assy-Filter & Brkt includes Fltr Head/Mtg Bkt/
John Guest Ftgs/Screws
1 2
3 51300C
98926C
51469C

DESCRIPTIONPART
NO.

FILTER PARTS LIST
(See Fig. 8)
3/8”
Water
Inlet

MAIN BOARD
I.R. BOARD

LED BOARD

SOLENOID
GROUND
VIOLET

NOT USED
CAPPED
YELLOW

NOT USED
CAPPED

FOUR PIN

CONNECTOR

FIVE PIN

CONNECTOR
WHITE
WHITE

NEUTRAL
RED

GREEN GROUND
BLACK

LINE VOLTAGE
MALE
PLUG
FEMALE

RECEPTACLE

ELECTRICAL DIAGRAM
Fig. 9
Jll
i' HH ~, I~~ I Y "{"'
Our duplex reciprocating air compressors offer two individual compressor pumps and two motors mounted on a single tank, providing 100% built-in backup or additional air power for those larger capacity jobs. The Duplex is ideal in applications where available power does not allow for a single larger compressor. The latest generation of Ingersoll Rand duplex reciprocating compressors has the legendary Type 30 pump with value added features in a space saving design suitable for those tight spaces.

Features
• Long-Life : Durable cast iron construction,
long-lasting extended pump life designed for
over 15,000 hours of trouble-free use
• Flexible, Compact Design: 100% continuous
duty with automatic duplexing or alternating
of compressors, ideal for applications where
space is at a premium
• Easy to Service: Individually cast cylinders,
overhung crankshaft and one piece connecting
rod simplifies maintenance and service
• Reliable Operation: All Season Select synthetic
lubricant increases efficiency; with 2,000
hours of service between changeouts, it performs four times longer than petroleum-based lubricants • Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty • Available Feature Packages (5, 7.5, 10 hp)
Value Package: Includes 100% cast iron pump, ASME-coded receiver tank, ODP motor, magnetic motor starter, automatic start/stop control with pressure switch, oil sight glass (10 hp only) and manual drain Value Plus Package: Includes all Value Package features along with upgraded electric drain and air-cooled Two-Stage Electric Duplex
Reciprocating Air Compressor 2-25 hp
aftercooler
<,"ii) Ingersoll Rand.

Model Specifications
Model 2-2475E5 2-2475E7.5 2-2545E10
CFM @ 90 psi 34.4 48.6 71.2
Max Pressure (psig) 175 175 175
Nominal Power (hp) 5 7.5 10
Flow at Max Pressure (cfm) 33.6 48 70
Base Length (in) 84 84 88
Base Width (in) 35 35 36
Base Height (in) 48 48 52
NPT Outlet (in) 1 1 1
Voltage 200, 230, 460, 575/3/60 200, 230, 460, 575/3/60 200, 230, 460, 575/3/60 Tank (gal) 120 Gallon Horizontal 120 Gallon Horizontal 120 Gallon Horizontal Weight (lbs) 1265 1315 1545
Package Options Value, Premium Value, Premium Value, Premium

Parts & Accessories
Air Compressor Tanks Electronic Drain Valves SimplAir Compressed Air Piping
Small Reciprocating Air
Filter Elements
F-Series Filters
About Ingersoll Rand Inc. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency.

For more information, visit www.IRCO.com
.
(flJ) Ingersoll Rando

SPECIFICATIONS
Elkay Dependabilt Stainless Steel 54-1/2" x 25-3/4" x 45" 18 Gauge Two Compartment Sink w/ 18" Right Drainboard and
Stainless Steel Legs
Model(s) E2C16X20-R-18X

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

PRODUCT SPECIFICATIONS
Elkay Dependabilt Stainless Steel 54-1/2" x 25-3/4" x 45" 18 Gauge Two Compartment Sink w/ 18" Right Drainboard and Stainless Steel Legs. Sink is manufactured from 18 gauge 300 series Stainless Steel with a #4 Finish , Center drain placement.

Material: 300 series Stainless Steel
Finish: #4 Finish
Gauge: 18
Weight Without Packaging: 120
Number of Bowls: 2
Sink Dimensions: 54-1/2" x 25-3/4" x 45"
Bowl 1 Dimensions: 16" x 20" x 12"
Bowl 2 Dimensions: 16" x 20" x 12"
Drainboard Location: Right
Drainboard Size: 18
Backsplash Height: 9
Leg Type: Stainless Steel
Drain Size: 3-1/2" (89mm)
Drain Location: Center
Special Note: Requires single splash mount faucet (not included). *Options available if applicable

Custom Options
Alternate Punching
□ Faucet Model: □ Punch Required:

Included with Product: Stainless steel legs and adjustable bullet feet.

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ASME A112.19.3/CSA B45.4
NSF 2
Accessory: ASME A112.18.2/CSA B125.2

PART:________________________________QTY: _____________ PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________ NOTES:_________________________________________________ APPROVAL:_____________________________________________
ELKAY@
I
(50
1 ·x
,,
20 /:;, □
8mm)
j
1-- 16
-(406mm)
L1(394mm) I
15 1/2
I
3/4 I
8mm)
9 (24
I
12 (30 5mm)
L_
7 0
~
541/2
(1384mm)
X
I
'
□
' . . '
1-- 16
-( 406mm)
I (203mm)
7 0
R3/4
(19.1mm)
\:
-
18 (457mm) -
I
I
25 13 /16
mm) (656
I
7 l
433/4
(1111mm)
34 mm) (86 4
#4 SATIN FINISH
FINISH:

DATE: 12/17198
SCALE: 1:1
DOOR+WALL
PROTECTION SYSTEMS DOC#:

CADIPC.194/rev1

CEMENT-ON
OR

SCREW-ON

AVAILABLE

INCLUDE WING SIZE, HEIGHT,

RADIUS AND GAUGE

CUSTOM BULLNOSE EXAMPLE SHOWN

STAINLESS STEEL

CORNER GUARD
PROJECT:

CUSTOMER:

LOCATION:
111
2 [38.1]
•
I
For More lnf'orl'IO.tlon visit•
www.tnprocorp.com
Clea up
Palladium® Rigid Sheet I Rigid Profiles/ Vinyl Wallcovering / Northern Hardwoods/ Aluminum Corner Guards/ Stainless Steel
[1] Completion: Immediately upon completion of installation, installer shall make sure that all vinyl sheet and profiles, vinyl and stainless steel products are cleaned and free of any layout marks, excess adhesive or surface blemishes. Remove excess adhesive with methods and materials recommended by the adhesive
manufacturer.
[2] Clean-Up and Routine Maintenance:
[al Rigid Profiles:

For general cleaning, use Antibacterial fantastik® All Purpose Cleaner Heavy Duty. Use a clean, lint-free cloth and wipe clean.

Do not use any abrasive cleaning cloths or sponges.

For tough stains, like markers, pencil, white marks, and rubber heel marks, the following products were shown to be most effective:

Zep® Heavy Duty Citrus Degreaser
• Clorox® Clean-up with Bleach
Antibacterial fantastik® All Purpose Cleaner Heavy Duty

1. Spray products onto profile and wipe with a dampened cloth.

2. Repeat process if stain remains. If cleaning product residue remains, rinse with water.
[bl Palladium® Rigid Vinyl Sheet:

For general cleaning, use Antibacterial fantastik® All
Purpose Cleaner Heavy Duty. Use a clean, lint-free cloth and wipe clean.

For tough stains, like markers, pencil, white marks, and rubber heel marks, the following was shown to be most effective:

Zep® Heavy Duty Citrus Degreaser
Clorox® Clean-up with Bleach
Antibacterial fantastik® All Purpose Cleaner Heavy Duty

1. Spray products onto sheet and wipe with a dampened cloth.

2. Repeat process if stain remains. If cleaning product residue remains, rinse with water.

Note: G2 BioBlend® material showed similar results.
[cl Stainless Steel:

Clean with neutral based detergents (non-abrasive cleaners).

Ammonia and alcohol based cleaners such as Windex® may also be used. Always use an abrasive free cloth.
[d] Northern Hardwoods:
. Clean wood with Simple Green®, and follow all instructions and precautions that come with the cleaner. Apply cleaner, diluted with water on soiled surfaces and rub with a clean lint-free cloth. Do not use any cleaners on unfinished wood. For stains on unfinished wood use a fine sandpaper. For scratches on Northern Hardwoods, treat these areas with a wood scratch remover. [e] Alumium Corner Guards:

For general cleaning, use Antibacterial fantastik® All Purpose Cleaner Heavy Duty. Use a clean, lint-free cloth and wipe clean.

NOTE: Any reference to a specific branded product does not constitute an endorsement by lnPro® Corporation.

No long term testing has been performed.

I PC.482/REV.7
• 800.222.5556. 262.679.9010 I PC'M•
World Headquarters S80 W18.766 Drive, 531 USA DOOR + WALL PROTECTION SYSTEMS Warranty
Door and Wall Protection Systems
Limited Lifetime Warranty
In Pro Corporation (In Pro) warrants to its purchasers that all I PC Door and Wall Protection Systems products sold by it will be free of manufacturing and material defects. Failure to use proper fasteners, adhesives or other installation methods consistent with In Pro installation instructions shall relieve In Pro of any liability. Any defective product will be replaced free of any charge if a claim is presented in writing to lnPro. In Pro will not be responsible for any installation costs involved in such replacement. Replacement will include shipment costs. This warranty is IN LIEU OF any other warranty, express or implied, including, but not limited to, any implied warranty of MERCHANTABILITY or fitness for a particular purpose. Our liability under this limited lifetime warranty is limited to replacement and does not include any responsibility for incidental or consequential damages of any nature.

IPC® •
DOOR+ WALL PROTECTION SYSTEMS
A DIVISION OF INPRO®
S80 Wl 8766 Apollo Drive• PO Box 406 • Muskego, WI 53150 USA• inprocorp.com FOR CUSTOMER SERVICE CALL TOLL FREE: 800.437.2698 FAX: 888.715.8407 lnpr-ocorp.com • 890.222.5556 • 262,679,9010
World Headqt.1arter.s 580 W18766 Apollo Drive, Muskego, WI 5 3150 IPC.485/REV.3
IPC® •
DOOR + WALL PROTECTION SYSTEMS
A DIVISION OF INPRO®
In ro C r t·
6625-410
Certificate Number
Corner Guards 03/12/2009 - 03/12/2019
Restrictions:

Certificate Period
Certified
Status
UL 2818 - 2013 Standard for Chemical Emissions for Building Materials, Finishes and Furnishings Wall finishes are determined compliant using an Office Environment with an air change of o.68 hr- 1 and a loading of 33.40 m2 • Products tested in accordance with UL 2821 test method to show compliance to emission limits in UL 2818, Section 7.1. ® Environment
UL Environment investigated representative samples of the identified Product(s) to the identified Standard(s) or other requirements in accordance with the agreements and any applicable program service terms in place between UL Environment and the Certificate Holder (collectively "Agreement").

PIT PLAN

ELEVATION VIEW
A
A

THIS DRAWING AND ALL INFORMATION THEREON IS THE PROPRIETARY PROPERTY OF THYSSENKRUPP ELEVATOR AND MUST NOT BE MADE PUBLIC OR COPIED. THIS DRAWING

IS LOANED SUBJECT TO RETURN ON DEMAND AND IS NOT TO BE USED DIRECTLY OR INDIRECTLY, IN ANY MANNER DETRIMENTAL TO THE INTEREST OF THYSSENKRUPP ELEVATOR.

FOR: MILLENIA FIRE STATION - DESIGN BUILD

ADDRESS: 1715 MILLENIA AVE.

CITY: CHULA VISTA, CA 91915 4 OF 7
DATE
A

SHEETJOB NUMBER
3/5/2019

REVDRAWN
JS 303-694-02A
FRONT
FRONT

HOISTWAY PLAN
SECTION[RH-CO] - STDHYD
OF TARGET HOLES =

TARGET HOLE
GU
ID

E RAILS

TO OF TARGET

EDGE OF PLATFORM

FACE OF RAIL
1 1/2"
1 13/16"
S
S S
S 6'-6 5/8"
S
Ź Ź
ŹŹ
Ź
F2
F1

OMEGA RAIL
Ź
Ź
Ź

SUMP PIT SIZE TO BE

DETERMINED BY

GENERAL CONTRACTOR
7"

PIT LADDER
Ź Ź
Ź
Ɣ LIGHTING (MINIMUM 200LUX/19FT. CANDLES) AND SWITCH, CONVENIENCE OUTLETS WITH GFCI PROTECTION PER NEC. LIGHTING IS REQUIRED AT THE PIT LEVEL.

Ɣ A LIGHT SWITCH LOCATED 4'-0" ABOVE BOTTOM LANDING NEXT TO THE TOP RUNG OF THE LADDER.

Ɣ A PLUMB AND PROPERLY VENTED HOISTWAY BUILT ACCORDING TO CODE AND SIZES SHOWN.

Ɣ ADEQUATE SUPPORT FOR JACK, GUIDE RAIL BRACKETS, AND BUFFERS (FOR REACTIONS SHOWN) Ɣ HOISTWAY BARRICADES AND ALL CUTTING AND PATCHING TO INSTALL HOISTWAY ENTRANCES, SILLS, HALL FIXTURES, OIL, AND ELECTRIC LINES.

Ɣ ENTRANCE WALL WITH LINTELS MUST BE PROVIDED AFTER ENTRANCE FRAMES ARE SET OR LEAVE A ROUGH OPENING 15" WIDER AND 15" HIGHER THAN THE FRAME OPENING. SEE INSTALLATION PROCEDURES FOR FRAME-TO-WALL INTERFACE DETAILS TO ENSURE CONFORMANCE WITH THE LABELED ENTRANCE INTERFACE CONSTRUCTION.

Ɣ PIT LADDER PER CAR (ACCORDING TO CODE) NOTE: MUST BE CLEAR OF ALL ELEVATOR EQUIPMENT.

Ɣ PIT LADDER LOCATION TO BE CONFIRMED BY THYSSENKRUPP ELEVATOR SUPERINTENDENT.

Ɣ POCKETS IN CORRIDOR WALL FOR HALL FIXTURES.

NOTE: MUST BE LOCATED AS DIRECTED BY ELEVATOR CONTRACTOR Ɣ SMOKE SENSORS (AS REQUIRED)
Ɣ ELEVATOR MEETS ASME A17.1 2004 CODE.

Ɣ AN 8" X 8" BLOCK OUT IS REQUIRED IN THE HOISTWAY WALL. LOCATION TO BE DETERMINED BY THYSSENKRUPP ELEVATOR SUPERINTENDENT.

Ɣ SUMP PIT OR DRAIN AS REQUIRED BY LOCAL CODE BY GENERAL CONTRACTOR.

BY OTHERS

THE FOLLOWING CONDITIONS MUST BE MET BEFORE INSTALLATION IS COMPLETED AND ARE NOT INCLUDED IN THE ELEVATOR CONTRACT

GENERAL DATA
6'-8"

BETWEEN CENTERLINE OF JACKS
1'-0"
3'-11"3'-8"
3'-0 3/4"
5 3/4"2 3/4"
7'-7"

HOISTWAY WIDTH
6'-10 1/2"

BACK TO BACK RAILS
6'-3"

DISTANCE BETWEEN RAILS
5'-9"
HOISTW

AY DEPTHS
RAILS
S
JACKS
S CAR
3'-0" CLR. OPENING3'-5"
6'-0" ROUGH
OPENING @ TYP. FLR.
1'-7"
11"8"
2"
5'-8"
MIN. CLEAR INSIDE
6 1/4"
1 3/4"
5'-1"

PLATFORM DEPTH
4'-3"
MIN. CLEAR INSIDE
2"
6'-0"
PLATFORM WIDTH4'-0 3/4"

SAFETY BEAM
2 1/2"

OIL LINE
2"
4'-0"

REFUGE SPACE
8'-8" TOP OF CAB

IN FULL TOP OVER TRAVEL
12'-8"

CLEAR OVERHEAD
7'-4"

CEILING HEIGHT
7'-11"

OVERALL CAB HEIGHT
9'-5"

UNDER CROSSHEAD
19'-0"

NET TRAVEL
8'-3" ROUGH OPENING HEIGHT
7'-0" CLEAR OPENING HEIGHT
4'-0"

PIT DEPTH
4'-0" MAX.

PIT LADDER
@ FLOORS
1,2

REAR OF HOISTW
AY

FRONT OF HOISTW
AY
1'-2"
N
(4") S

JACK (TYP)

SELECTOR
Ɣ SAFETY BEAM REQUIRED PER OSHA 1926 502 PROVIDED AND INSTALLED BY OTHERS, AS DIRECTED BY THYSSENKRUPP FIELD OFFICE DESIGN LOAD = (STATIC, NOT IMPACT)5,000 LBS

HYDRAULIC ELEVATOR CONTRACT DATA
TYPE: ELEVATOR DESIGNATION:

NOTE A: OIL PIPE LINES AND FITTINGS SHALL BE PROPERLY SUPPORTED TO RELIEVE STRAIN.

NOTE B: ALL REACTIONS INCLUDE ALLOWANCE FOR IMPACT.

NOTE C: THYSSENKRUPP ELEVATOR TO BE NOTIFIED OF ANY CHANGE TO ELEVATOR HOISTWAY OR MACHINE ROOM DESIGN.

NOTE D: ELEVATOR DESIGN & FABRICATION BASED ON ESTIMATED CAB WEIGHT SHOWN.

LAYOUT APPROVAL WILL BE CONSTRUED AS FINAL CAR WEIGHT, UNLESS OTHERWISE NOTIFIED.

SPEED: CAPACITY:

CAR ENCLOSURE: DOOR HAND:

PLATFORM THICKNESS: FINISHED FLOOR:

CAR WEIGHT:

TELEPHONE: PIT LADDER:

POWER UNIT: POWER SUPPLY:

STARTING: OPERATION:

GLOJ: GLOPU:

OVER TRAVEL: BOTTOM: TOP:

JACK MODEL: PLUNGER WEIGHT:

PLUNGER WALL THK:

BETWEEN PIT FLOOR &

CAR BOLSTER ON
COMPRESSED BUFFER:

PLUNGER O.D:

NET AREA:

BOTTOM CAR RUNBY:

CAR BUFFER STROKE:EST. WORKING PRESS:
(QTY) SPRING(S) #: TOTAL SPRING(S) CAPACITY:

CAR
FRAME
S =
I =
A = A =
I =
S = S =
I =
R =
RAIL FORCES F1 F2 SEISMIC RAIL FORCES ZONE:

CAR STATION FEATURES:

CAR RIDING LANTERN:

PUSH BUTTON MARKINGS:

F1 = F2 =
FORMED

CROSSHEAD
FORMED

BOLSTER
FORMED
STILE
UPPER: LOWER:

UPPER: LOWER:

JACK REACTION (EA.): CAR BUFFER REACTION:

PLUNGER LENGTH: UPPER: LOWER:

CYLINDER LENGTH: CYLINDER O.D: WALL THK:
endura 21 A 1
110 FPM UP / 135 FPM DOWN 2,100 LBS

TKAP RIGHT FRONT
3 3/8" BY OTHERS
2,215.00 LBS

BY ELEVATOR COMPANY BY ELEVATOR COMPANY
EP-95, 20 HP 208 V 3 Phase 60 Cycles
SOLID STATE STARTING TAC32
4,315 LBS 4,873 LBS
9"8 1/2"

2.5T TWIN/TELE 558.00 LBS
13'-7 5/8" 11'-8 7/16"

0.375" 0.25"

2.5" 3.75"
11'-8 7/8" 5" 1/4"

15.904 SQ.IN.
6"
2 1/2"337 PSI
(1) 780CB1 15,223 LBS

3.27 9.82

1.85 7GA x 6" x 2 1/2"

5.67 23.39

2.40 7GA x 8 1/4" x 2 3/4"

1.38 2.17

1.01 10GA
4 289 LBS 194 LBS 1,144 LBS 572 LBS
Signa 4 Fixtures, T2 Buttons, Alarm Button, Telephone, Position Indicator
1, 2
Car Operating Panel
2'-3 7/8"
5,175.00 LBS 11,886.00 LBS
I, I,
-r
,, +- +
➔
11 11
_,_ I
~
={IE
~ -~
0 I I I
u
~,
-r-
I
- ~
I
~------t-----
- ,-- --
~
- ia ~ +
I
I \
III
____,_
II
I I c=i
'
i
~' ,~
;
-_o__-
~'
-'r-
1 _ll -
-
==CE :I] = -
-
A
V
A
IV
={)E ~ .. -
C--
= -----',
III
=l=
~i 1 r f
1'
I
==CE :;[ ===== ~ I
= ~ -- -+-- -~ ----8--'-
-
1:r - • ------fil----• ----a-,-
____,_ I
I [ I
I
I c=i I
I_ I_
1 1
I I
!□ Jj
~
engineering,tomorrow.together. thyssenkrupp

MACHINE ROOM PLAN VIEW
MINIMUM MACHINE ROOM CEILING HEIGHT = 7'-6"
6 OF 7 303-694-02A 3/5/2019JS A

DATEJOB NUMBER SHEETDRAWN REV THIS DRAWING AND ALL INFORMATION THEREON IS THE PROPRIETARY PROPERTY OF THYSSENKRUPP ELEVATOR AND MUST NOT BE MADE PUBLIC OR COPIED. THIS DRAWING

IS LOANED SUBJECT TO RETURN ON DEMAND AND IS NOT TO BE USED DIRECTLY OR INDIRECTLY, IN ANY MANNER DETRIMENTAL TO THE INTEREST OF THYSSENKRUPP ELEVATOR.

FOR: MILLENIA FIRE STATION - DESIGN BUILD

ADDRESS: 1715 MILLENIA AVE.

CITY: CHULA VISTA, CA 91915
3'-6"

CLEARANCE
1'-6"
ELEV: 1
3'-6"

CLEARANCE
ELEVATOR DESIGNATOR: 1
5'-9"

MACHINE ROOM DEPTH
7'-7"

MACHINE ROOM WIDTH
3'-6"

DOOR WIDTH
Ɣ BASED ON THIS INFORMATION, WE REQUIRE ELECTRICAL FEEDERS AND FUSED

DISCONNECTS SIZED PER THE FOLLOWING INFORMATION LISTED IN THE POWER FEEDER TABLE.

Ɣ GENERAL CONTRACTOR MUST FORWARD POWER REQUIREMENTS TO THE ELECTRICAL CONTRACTOR.

NOTE: ALSO, A FOURTH WIRE OF SAME SIZE AS THREE PHASE WIRES IS

REQUIRED FOR GROUNDING PURPOSES TO MINIMIZE ELECTRICAL NOISE INTERFERENCE. THE GROUNDING WIRE MUST BE CONNECTED TO THE BUILDING ELECTRICAL SYSTEM GROUND.

Ɣ A MEANS TO AUTOMATICALLY DISCONNECT THE MAIN LINE PER POWER SUPPLY

TO THE ELEVATOR PRIOR TO THE APPLICATION OF WATER IN THE ELEVATOR

HOISTWAY WILL BE FURNISHED BY THE ELECTRICAL CONTRACTOR THIS MEANS SHALL NOT BE SELF RESETTING.

Ɣ DEDICATED 120 VOLT, 15 AMP SERVICE, ALONG WITH TELEPHONE CIRCUIT WHEN

REQUIRED TO TERMINALS OF EACH REQUIRED CONTROLLER (AS LOCATED ON PLAN VIEW) FOR THE FOLLOWING:
- CAR LIGHT AND ALARM CIRCUIT WITH GFCI PROTECTION PER NEC. - GROUP CONTROL WHEN REQUIRED.

NOTE: IF STANDBY POWER IS SUPPLIED TO ELEVATOR, CAR LIGHT AND ALARM CIRCUIT AND GROUP CONTROL SERVICE MUST BE STANDBY POWER BACKED.

Ɣ PIPING WITH PULL STRING FROM HOISTWAY TO ELEVATOR MONITORING PANELS BY OTHERS.

Ɣ PROVIDE A TRANSFER SWITCH CONTACT THAT IS CLOSED WHEN NORMAL POWER IS PRESENT AND IS OPEN ON EMERGENCY POWER.

Ɣ PROVIDE A POWER TRANSFER WARNING CONTACT THAT CLOSES 20 SECONDS

PRIOR TO TRANSFER IN EITHER DIRECTION AND IT OPENS WHEN TRANSFER IS COMPLETE.

Ɣ TOTAL FULL LOAD UP SPEED AMPS IS BASED ON 100% OF ELEVATOR CAPACITY, THE VALUE NEEDED FOR EMERGENCY POWER SIZING.

Ɣ THE HYDRAULIC MOTORS ARE RATED FOR INTERMITTENT DUTY (SEC. 620-13 AND 430-33). BRANCH CIRCUIT CONDUCTORS CAN BE SIZED FOR AN AMPACITY 90% OF THE MOTORS NAMEPLATE RATING AS DETERMINED BY (SEC. 430-22 [E]) Ɣ LIGHT SWITCH, LIGHTING AND CONVENIENCE OUTLET WITH GFCI PROTECTION PER ASME/CSA B44.

Ɣ AN ENCLOSED MACHINE AREA (ACCORDING TO CODE) WITH ADEQUATE LIGHT, HEAT AND VENTILATION (MIN. 50F., MAX. 90F. WITH NON-CONDENSING HUMIDITY OF 10-90%) AND SEALED CONCRETE FLOOR SLAB SURFACE.

NOTE: MUST PROVIDE ADEQUATE DOOR SIZE TO ALLOW INSTALLATION OF EQUIPMENT, OR LEAVE WALL OUT UNTIL EQUIPMENT IS IN PLACE.

BY OTHERS

THE FOLLOWING CONDITIONS MUST BE MET BEFORE INSTALLATION IS

COMPLETED AND ARE NOT INCLUDED IN THE ELEVATOR CONTRACT

GENERAL DATA

ELECTRICAL DATA

ELEVATOR

DESIGNATOR

POWER UNIT
WIDTH x DEPTH
TANK
HEIGHT

OIL LINE
HEIGHT

OIL LINE
OUTLET

TANK WEIGHT

WITH OIL

CONTROLLER
HEIGHT

HYDRAULIC
FLUID REQ.

POWER UNIT AND CONTROLLER INFORMATION
POWER
SUPPLY
HORSE
POWER

STARTING
A.C. AMPS

TOTAL FULL LOAD

UP SPEED MOTOR
A.C. AMPS
RATED
A.C. AMPS

SHORT CIRCUIT

CURRENT RATINGS
(AT 600V OR LESS)

POWER FEEDER
1 3'-3 3/4" X 2'-10" 3'-8 1/8" 3'-1 7/8" 2" 2,250 4'-5" 100 208 20 195 95 65.1 5,000 AMPS Ɣ HEAT LOAD IS BASED ON CAR LOADED AT 40% CAPACITY RUNNING AT AN AVERAGE 35% DUTY CYCLE.

HEAT LOAD IN MACHINE ROOM DUE TO ELEVATOR EQUIPMENT = 8684 BTU/HR ADJACENT AT FLOOR 1
Ɣ PRIMARY FIRE SERVICE LOCATED AT FLOOR:

Ɣ ALTERNATE FIRE SERVICE LOCATION AT FLOOR:
1 ADA PHONE PROVIDED
N
ELEV. OIL LINE SIZE NOTE
1 2" OIL LINE FROM TANK TO 2" SHUTOFF VALVE. 2" SCH 40
BLACK PIPE, ASTM A-53, TYPE (E) OR (S), GRADE (B) OR

EQUIVALENT TO JACK
7'-7"
8'-3"
5'-9"

I I I I I I I I I I I I

I I I I I I I I I I I I
, I , ,[__J ,, -7 ~
I ,-r-1
~
I
I -·-- ... . .. ···1 I I -fl-I "
I ,t J
I 7
~
I
~
1--+------ ,--7 TI
!:1 I I oO I I I .L! !
I I ,-+---§
oO
• ■: ~- _J
I I
I I
/
I d
I ~-+-_J §
-
I I L ________ __2.. i------:. L _____ ~
~

I II II I
L I I I -···-r-···---.-···-···-
I
r-···--'·-···--,
l i
L----·-···-···___J
cffil)
engineering.tomorrow.together. thyssenkrupp

ENTRANCE LEFT SIDE VIEW

LOBBY SIDE

ENTRANCE ELEVATION VIEW AT TYPICAL FLOOR
Î

ENTRANCE PLAN VIEW

LOBBY SIDE
A
R2 R1ƔƔ

THIS DRAWING AND ALL INFORMATION THEREON IS THE PROPRIETARY PROPERTY OF THYSSENKRUPP ELEVATOR AND MUST NOT BE MADE PUBLIC OR COPIED. THIS DRAWING

IS LOANED SUBJECT TO RETURN ON DEMAND AND IS NOT TO BE USED DIRECTLY OR INDIRECTLY, IN ANY MANNER DETRIMENTAL TO THE INTEREST OF THYSSENKRUPP ELEVATOR.

FOR: MILLENIA FIRE STATION - DESIGN BUILD

ADDRESS: 1715 MILLENIA AVE.

CITY: CHULA VISTA, CA 91915 7 OF 7
DATE
A

SHEETJOB NUMBER
3/5/2019

REVDRAWN
JS 303-694-02A

FEATURES OF ENTRANCES DATA
SILL MAXIMUM WHEEL LOADS 625 LBS

KEYHOLES TO BE OMITTED
THIS FRAME HAS A WARNOCK HERSEY LABEL OF 2 HOURS

DUST COVERS NOT INCLUDED

FEATURES OF YOUR ENTRANCES

FEATURES FINISH LOCATION
DOOR OPEN STRUT BUMPERS: N/A @1,2
KICKPLATES: __________ @1,2
BINDERS: __________ @1,2
SILL FINISH: ALUMINUM @1,2
TOTAL WEIGHT ELEVATOR 1 ELEVATOR
CAB AND HALL DOORS 282 LBS
NOTE "A":
8" MINIMUM STRUCTURAL

SUPPORT FOR SILL INSTALLATION

ENTRANCE CHART

M721 ENTRANCE:

CENTER OPENING AND 1 SPEED = FRAME OPENING + 1'-3"
2 SPEED = FRAME OPENING + 1'-5"
ENTRANCE TYPE : M721
FOR ELEVATOR 1
1 SPEED

RIGHT HAND FRONT ENTRANCE
FOR ELEVATOR 1

FOR ELEVATOR: 1

R2 270
R1 648

DOOR REACTION
CASE 1
SEE NOTE "A"
5'-0"
C/L 4.10.5 28 CFR PART 36

CLEAR OPENING HEIGHT (REFER TO DOOR SCHEDULE)
CLEAR OPENING HEIGHT + 2" = OVERALL FRAME HEIGHT
2"
0 3/16"
MINIMUM FLOOR TO FLOOR HEIGHT = "SEE ENTRANCE CHART"

CLEAR OPENING WIDTH

REFER TO DOOR SCHEDULE
2"
FRAME
2"
FRAME
ACTUAL

WALL SIZE
0 3/4"
ELEVATOR: 1 FRONTENTRANCE SCHEDULE

FLOOR WALL TYPE WALL SIZE
ACTUAL OA. FRAME "B" DIM.

PLEASE REFERENCE THE RAIL STACK SHEET OF THIS PACKAGE FOR

BUILDING LANDING MATRIX
ENTRANCE DIMS.

DIM "B"
2 7'-0" H X 3'-0" W TBD TBD TBD
1 7'-0" H X 3'-0" W TBD TBD TBD

FRONT ENTRANCE HALL FIXTURES

ITEM DESCRIPTION FLOOR

A HALL STATION TYPICAL
HALL FIXTURES ARE FOR REPRESENTATION ONLY. FOR ACTUAL LOCATION OF POCKETS FOR HALL FIXTURES, CONTACT ELEVATOR CONTRACTOR. 6'-0"

ROUGH OPENING WIDTH
8'-3"

ROUGH OPENING HEIGHT
NOTES:

GENERAL CONTRACTOR RESPONSIBLE FOR HOISTWAY REINFORCING AT FLOOR SLAB BEFORE INSTALLATION OF ENTRANCE FRAMES.

MINIMUM OF 4" HIGH X 8" WIDE REINFORCED CONCRETE, REINFORCED

OF OPENING REQUIRED FOR ANCHORING SILL SUPPORT ASSEMBLY,

REINFORCING TO BE LOCATED WITH RESPECT TO REACTION POINTS,

REFERENCE INSTALLATION DRAWINGS ARE AVAILABLE UPON
REQUEST.

REACTIONS (LBS.) DUE TO LOADS ON DOOR PANELS, APPROX.

HORIZONTAL LOADS AND LOCATION TO BUILDINGS SHOWN PER ASME A17.1 PART II,
THE SPECIFIED LOADS ARE CONSIDERED IMPACTED.
2" BELOW

EACH FLOOR
4'-6" 1'-10 1/2"
TT ft ~ =!}
I I
I I
il U -- I I
JJ JJ
I, I,
'I 'I
,----v1-_,_
I, ,----------------7
I
I
I I
I - --~
I I
0 ,:,,:7
L•_J
_______,_
D
I
I I
~u
-----------------
/
I I, I
I I
'I 'I 'I
I
I
I
~
engineering.tomorrow.together. thyssenkrupp
Cab Finishes Guide 3
Woods
Colors and patterns may vary slightly from the printed representations above.

Select Cherry
7759
Planked Deluxe Pear
6206
Storm Teakwood
8908
Walnut Fiberwood
8915
White Painted Wood
8902
Waxed Maple
8905
Danish Maple
8906
Fox Teakwood
8907
Blackened Fiberwood
8916

Plastic laminates
Pictured above: Sarum Twill (8827)
All laminates are added urea-formaldehyde free.
m :11m: 111:111:111111:::
11111111111
Elevator Technology
thyssenkrupp Elevator Corporation
2591 Dallas Parkway, Suite 600
Frisco, TX 75034
P: +1 844 427 5461
www.thyssenkruppelevator.com
All illustrations and specifications are based on information in effect at time of publication approval. thyssenkrupp Elevator reserves the right to change specifications or design and to discontinue items without prior notice or obligation. © 2018 thyssenkrupp Elevator Corporation. CA License #C11-651371 | 11989 | Cab finishes guide ThyssenKrupp
ThyssenKrupp Elevator
Americas Business Unit
Brilliant. Modern. Practical.

Signa4™ is our newest line of signal fixtures,
featuring a sleek, sophisticated appearance that
fits with today’s high-tech lifestyle.

An elegant blend of taste and functionality,
Signa4 is an excellent choice for your new
installations.

Signa4’s Superior Benefits:
• Unique design available only from
ThyssenKrupp Elevator
• Illumination by LED’s for energy efficiency and
an extended life span
• Allows for renovation of architectural metal
finish without requiring removal of box or
frame
• Meets all U.S. National Fire Codes, including
California
Keep your Elevator Buttons Cleaner with
Microban
® Protection.

ThyssenKrupp Elevator and Microban, the
foremost leader in microbial deterrent products,
have entered into a mutually exclusive agreement
to provide elevator signal fixtures manufactured
with Microban protection. Microban protection
resists the growth of odor and stain causing
bacteria.

Consult your local sales representative to inquire
about equipping your new or existing elevator
with signal fixtures manufactured with Microban
protection.

Standard Signa4 Car Fixture Features:
• Satin stainless steel finish swing return
• Injection-molded band at top of car station
which includes ThyssenKrupp Elevator logo,
capacity and elevator number
• Discrete or electronic dot matrix position
indicator with blue LED illumination, displaying
the car’s position within the hoistway
• Standard key switches, including 2-speed
Fan/Light, Independent Service, Run/Stop and
Hoistway Enable
• Buttons with black targets, halos with brilliant
blue LED illumination and charcoal bezels
• Black “fishtail” style Braille with white
characters and black background, mounted on
a charcoal bezel
• Phase 2 Fire Service signage, key switch
and Fire Hat; available in 2000 or 2004 U.S.

National Fire Codes as required by your
project location
• Rath Microtech
® ADA Handsfree Telephone
• Emergency light with super bright LED’s
that exceed National Elevator Safety Code
requirements
Car Fixture Upgrades:
• Wrap-around or full-width wrap-around swing
returns in a wide range of finishes and alloys
• Buttons with black targets and bright white
halo illumination
• Locked compartment with key switches,
receptacle or dimmer switch
• Engraved signage including capacity, elevator
number, “NO SMOKIN G” and “CERTIFICATE
OF

INSPECTION ON FILE IN BUILDING
OFFICE”. Custom engraving available upon
request, as space allows
• Devices for life-saving operations such as
Code Blue and Massachusetts Medical
• Fire phone jack
2000 U.S. National Fire Code
TKE Logo Plate
(optional)
“No Smoking” location
when engraved – 1¨ high
(upgrade)
Visible Fire Service
devices for 2000 Code,
including the ADA phone
speaker
Engraved Certificate
Location – ¼¨ high
(upgrade)
Elevator Number and
Capacity Engraving
(Required with Logo
Plate shown above)
2004 U.S. National Fire Code
Capacity & Logo Band
(standard)
Fire Service devices
behind locked box as
required per 2004 Code
Fire Hat to illuminate when
car is on Firefighters’
Emergency Operation
Locked Compartment
(upgrade)
Speaker for ADA phone
Duplex Receptacle
(upgrade)
• NO SMOKING ·i
""''""'"····....... --H 0 11 , .. , ~ , ... ,~01111 00~( IIBID
....
&DIii
-....
~ - .- -
Intermediate Hall Station
with Fire Service Devices
Intermediate Hall Station with
Fire Service & Appendix H/O
Intermediate Hall Lantern
with Domed Lenses
Terminal Hall Lantern
with Arrow
Hall Position Indicator
[Discrete]
Intermediate Hall Station
Combination Hall Lantern/Position Indicator
[Discrete]
In Case Of Fire
Elevators Are Out Of Service
Use Exit
FIREFIGHTERS' OPERAT.ION

TO RECALL ELEVATORS INSERT

FIRE KEY ANO TURN TO 'OW

FIRE RECALL
•
Standard Signa4 Hall Fixture Features:
• Satin stainless faceplates with charcoal trim
• Black buttons and halos with brilliant blue LED
illumination, mounted on charcoal bezels
• Flush-mounted Fire Ser
vice over lay with
integral red-illuminating Fire Hat, complying
with current U.S. National Fire Codes
• Jamb symbols which comply with the most
stringent Braille requirements
, including
California’s
• Choice of hall or car riding lanterns, with b lue
LED illuminating arrows
• Discrete or electronic dot matrix position
indicator with blue LED illumination, displaying
the car’
s position within the hoistway
Hall Fixture Upgrades:
• White halo illumination or white button
illumination to meet California code
• Wide range of finishes and alloys
• 2 ½¨ round, domed lenses on vertical hall
lanterns
•
Combination position indicator with hall
lanterns [arrows only]
• Special LED illumination on hall lanterns,
combo units or car riding lanter
ns: white for
“Up” direction & red for “Down” direction
• Appendix H/O signage with plastic flame
insert and eng
raved instructions, available
integral with hall station or as a separate plate
• Devices for life-saving operations such as
Code Blue and Massachusetts Medical
Version 01.8
All illustrations and specifications are
based on information in effect at time
of publication approval. ThyssenKrupp
Elevator reserves the right to change
specifications or design and to
discontinue items without prior notice
or obligation.

Copyright
© 2008
ThyssenKrupp Elevator Corporation
ThyssenKrupp Elevator
P .O. Box 2177
Memphis, TN 38101
Tel: (877) 230-0303
thyssenkruppelevator.com
TKE 0041 v01.8 25M 108 GSI Printed in USA
Finish: #215 Clear Anodized
Butt Asphaltum Painted
For 2 Flags
With Locking Cover and 5' Channel
L.Ph. Bolander & Sons
1355 Evans Ave.

San Francisco, Calif. 94124
800/434-5611 Fax 415/648-0402
Quality Flagpoles Since 1885
Gold Anod1z,,d Spun --
Aluminum Ball with flush -
seam
Rev olv ing Cast Aluminum
Truck Assembi;
Solid Braid Polyester--- ~11
Halyard I
Brass Swivel Snap___with V1,vl~I Cover
I I
All New, 6063-T6 Heat Treated ~
Seamless Aluminum Tubing '
1Mth a ex1rem&o/ fine grain
Satin Finish.

Optional Duranodic, Clear
Anod~ and Powder Coat
F1ms es a,ailable
9" Casi Aluminum Cleat-- --H;
Ylith 5116" Stainless Steel
Machine Screws
Spun Aluminum Collar
2000 PSI Concrete-------
3· Non-Shrink Grcut-~---....._
------Wood Wedges (remove- ___ ~
after tamping sand) ...____ ·
Dry Sand trghtly tamped- ___ _
after aligning pole
Grcund Sleeve - Hot Dip------1----H
G~lv anized Steel
Steel Centering Wedges- ____ _
Steal Base Plale----
A
Steel Support Pla1e-.- -- c
welded to Ground Sp11<e
K
Exposed Overall Diarfflter VVall
G
Height Height Butt Top Thickness
LTS20' 22'6" 4" 'Z' .125'
L120' 226" 5" 3" .12S'
L125' 28' 5" 3n .125"
L TS25' 28' 5" 3" .156''
LT.30 33' 5" 3" .125"
L1B30' 33' 5" 3" .156''
LHT30' 33' 5" 3" .188"
LT.35' 38'6" 6" 3.5' .156"

STANDARD GROUND SET CONE

TAPERED ALUMINUM FLAGPOLES

EXTERNAL HALYARD

REVOLVIING

NON-FOULING

TRUCK DETAIL
Aluminum Body,
with 26 Stainless
Steel Ball Bearings
and Two Delrin
Sheaves on
Stainless Pin
Exposed
Height
20'
25'
30'
35'
40'
50'
60'
7[J
A
30"
3'
3'
3'6"
4'
5'
6'
7'

SELF ALIGNING

INTERNAL SLEEVE
This pre-fitted, shop
rrachined sleeve is d&
signed lo alloH for the
field asserrbly, w nhout
welding, d large sha1s
whi::h m.Jsl be shipped
in sectiors. Proper rrat
ing of the numbered
parts will result in a fine ·
hair line joint.
_L
C
I--
Spun Aluminum
Standard Flash Collar
A B C
5"-8"
10-12"
15"
22"

2.75"

3.5"

FOUNDATION DIMENSIONS

B C D E F G H K
6" 18" 8" 10" 4" 3' 24" 22"
6" 18" 8" 10" 4" 3'6" 28" 22"
6" 18" 8" 10" 4" 3'6" 28" 24"
6" 18" 10" 12" 4" 4' 30" 26"
6" 18" 10" 12" 4" 4'6" 36" 32"
6" 24" 12" 14" 8" 5'6" 48" 42"
6" 24" 15" 16" 8" 6'6" 48" 42"
8" 24" 15" 16" a· 7'6" 60" 48"
These reconmended foundations ere only rrinim..ims. Dimensions may vary a:;cording to soil and wind conditions at lo::ation ct installation.

Length Ball Halyard Ship Grrund Rag Shipping
Tapered Straigtt Dia Dia Sections Sleeve Size ~ight
10' 12'6" 5'' 5'16" 1 8' 3'x!3 133#
11'8" 1010" 5' 5116'' 1 8' 'J><5' 134#
11' 17' 5'' 5116'' 1 8' 4'x6' 142#
15' 13' 5'' 5'16" 1 8" 4'x6' 152#
17'3'' 159'' 6' 5'16'' 1 or 2 8" 5"'8 152#
17'3" 15'9'' 6" 5'16'' 1 or 2 8" 5'x8' 158#
17'3" 15'9'' 6'' 5'16'' 1 or 2 8'' 5'£ 172#
20' 18'6" 6" 5'16'' 1 or 2 10" 5'£ 2Z1#
L, Pit, ~~ & s~
Flagpoles Since 1885
l.

STANDARD GROUND SET CONE TAPERED ALUMINUM FLAGPOLES
~pecifications
GENERAL. Bolander External Halyard aluminum flagpoles are made from all new, heat treated. seamless 6063-T6 tubing and are designed to withstand winds of 110 MPH, un-flagged. All shafts are uniformly cone tapered approximately 1" in every 5'6".

Overall lengths up to 28' can be fabricated in one piece and shipped via motor freight to almost any destination. Longer lengths requiring shipment in two sections shall be factory fitted with self align ing flush seam field joint, requiring no welding.

All poles are highly polished wilh fine grain aluminum oxide cloths resulting in a high quality deep luster finish. This extremely fine grain finish provides a elegant soft sheen while remaining mainte nance free. Optional Duranodic and Clear anodizing finishes are available upon request as well as a full line of powder coating.

Upon completion of polishing, the poles are spiral wrapped in tire paper and shipment is made in a hard fiber tube to protect the finish. The unexposed portion of the shaft, which will be belOIN grade, can be given a heavy coat of asphaltum paint if required.

STANDARD FITTINGS. Fittings listed below are standard on all ground mounted LT External hal yard flagpoles.

BALL. Constructed of 14ga. aluminum, with flush seam and gold anodized for color and durability.

TRUCK. Cast of virgin alum in um and shall be two sheave, revolving, non-fouling, with 26 stainless steel ball bearings. The truck will be provided with two Delrin sheaves.

HAL YARD. Shall be white, UV resistant Pol~ster, of length for pole height, with white vinyl cov ered brass flag snaps
CLEAT. Provide a 9" cast aluminum cleat with finish to match that of pole. Mount with 5/16" stainless steel machine screws.

FLASH COLLAR. The flash collar shall be spun aluminum alloy 5052-H32, of diameter and shape as detailed. The finish shall match that of the pole.

GROUND SLEEVE. Fabricated from #16 ga. galvanized steel with 3/8" steel base plate, whose square dimension is two inches larger than the sleeve diameter. All steel wedges, base plate, sup port plate and lightning ground rod shall be welded of dimensions as detailed. ltCH'T :

I
I I
I
I
I
: : .,
I
I
I
I
l
I
I
' I
I
' l
I
l
'

FRONT VIEW
C0\1£A REMOVU>
~ Cl.MIT"f
r

TOP MOUNTING I
8RAQt£T

HALYARD
~ANN£L
HIHGEO
8ASE·PLATf
I
I
I
I
I
I
I
I
4 ' I
I
I
I
I l
•
I
I
j
I ;
I
f
I
I
z:.:r.:

I
I
I
I
I
I
I
I
I
I
!
I
I

SIDE VIEW
INSTALLATION tNSTRUCTJ~S FOR

ASSEMBLY OF
.lLEll

STANOARO CLEAT COVER ANO

HALYARD CHANNEL
flEIMfORCIHG BLOCK

DETAIL-HALYARD CHANNEL
REINFORCED TOP $£CTI~
/ ADJUSTMENT SCREWS
' ,/JAM HUT$
.,.,.

I ,
I
U>CKING
TAB
'-- HINGED CLEAT

COVER VV
CTL!HDER LOCK
NOTE:
9" CLEAT
LATCH

CASTING
I. OLD STYLE CLEAT COVER WILL NOT WORK
IN THIS APPL!CATIOI«,
.,....__
QlT.E:

NEW STYLE STANDARD Cl.EAT COVER-CAST AWM. REV,:

JST:
_____________________________ ......, _________ _.

JOB•
NEW ST'tLE STANDARD CLEAT COVER

INSTALLATION INSTRUCTIONS
*********************************************
BILL OF MATERIALS:

Hinged cleat cover vith cylinder lock, keys, plastic dust cover,

9.tt cast aluminum cleat, cast aluminum hat-shaped latch casting and two each; 1/~-20 x 2-1/2" screvs.

INSTALLATION:
'l'o ln:sta 11 cleat cover, plac:e hinged base plate over mounting holes in shaft 111th recessed end facing upwat:d. Sving hinged cover open and place a Concord 9" cleat over the holes. (NOTE:

The cleat cover will not vork properly using other than the Concord 9
11 cleat furnished. )Place latch casting on cleat and
insert mounting screws through the casting, cleat and base plate.

Thread screws into tapped hole in shaft, drawing them up snugly without stripping.

Close cleat cover over cleat and using key, lock the cover. Make certain the locking tab cleanly engages the latch casting. Remove the key, snap the plastic dust cover over lock and turn key over to ovner.

BILL OF MATERIALS:

NEW ST~LE HALYARD CHANNEL
I~STALLATION INSTRUCTIONS
New style standard cleat cover, installed; Two adjustment screvs (l/4-20 stainless steel set screws) w/ jamb nuts; 5'x 1" x 211 aluminum channel; Cast aluminum mounting bracket vith chain and mounting screws; Tvo flag-head 1/ 4-20 x 1/2 Allen-head bracket mounting/screws.

INSTALLATION:

Unlock and open the installed cleat cover. Attach chain to both channel and mounting bracket using screws provided. Place halyard channel flat against the the flagpole shaft vith the bottom end in the recess in cleat cover. Now, position mounting bracket over top end of channel allowing between 1/4-1/2" of end play. Hark hole location:s and drill mounting holes using a #7 dI 111. Tap holes 1/4-20 and mount bracket using the Allen-head screws provided. With channel positioned in bracket and cleat cover, close cover and check for slack play. Install adjustment set screvs (w/jamb nuts) and adjust to hold channel tight to flagpole vith cover locked. Tighten jamb nuts to maintain adjustment.

With cleat cover open and vlth Halyard Box channel te111oved and hanging free, raise flag and tie off halyards on cleat. Now slip halyard box channel over halyard ropes, sliding upper end into the mounting bracket and lover end into the recess ln the cleat cover. With halyards completely covered,, clo5e cleat cover door, lock and remove key.
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /1 /8 □ /9 /10 /10 /11 /12 /13 /14 □ /0 /6 □ /15 /14 /16 /12 /13 □ /17 /11 /14 /13 /18 □ /19 /20 /12 □ /21 /16 /22 /13 □ /17 /11 /14 /13 /18 □ /23 /22 /11 /24 □ /10 /25 /26 /20 /27 /16 /22 /13 □ /28 /22 /19 /18 /18 □ /29/11 /22 /30 /18 /31 /27 /27 /32 /18 /7 /2 /2 /33 /33 /33 /34 /18 /14 /16 /12 /13 /32 /11 /14 /13 /34 /25 /11 /24 /2 /24 /11 /12 /13 /14 /0 /6 /34 /31 /27 /24 /35 /0 /2 /0 /17 /22 /11 /12 /36 /25 /27 /18 /17 /31 /11 /27 /11 □ /37 /19 /14 /14 /13 /22 /38 /21 /9 /39 /40 /18 /41 /11 /20 /27 /19 /25 /27 □ /42 /18 /43 /16 /18 /27 /11 /22 /38 /43 /11 /24 /13□ /44 /45 /46 /47 /48 /49 /48 /47 /50 /51 /48 /52 /53 /44 □ /55 /48 /53 /44 /51 /50 /56 /56 /50 /51 /48 /52 /53□
□/10
/11 /12 /13 /14 □ /0 /6
□ /15 /27 /19 /27 /16 /11 /20 /19 /22 /38 □ /17 /11 /14 /13 /17 /31 /11 /27 /11 □ /57 /38 □ /58 /19 /27 /31 /19 /20 /16 /13 /14 □ /41 /19 /18 /18 /16 /12 /38 /59/60 /61 □ /62 /63 /64 □ /65 /66 /67 /64 /68 □ /69 /70 /71 /21 /11 /22 □ /27 /33 /11 □ /11 /22 □ /24 /11 /22 /13 □ /18 /27 /11 /22 /16 /13 /12 □ /18 /27 /19 /27 /16 /11 /20 /18 /34 /21 /11 /22 □ /25 /14 /11 /18 /13 /27 □ /19 /32 /32 /14 /16 /25 /19 /27 /16 /11 /20 /18 /29/31 /13 /20 □ /19 /27 /24 /11 /18 /32 /31 /13 /22 /13 □ /16 /18 □ /27 /31 /13 □ /18 /19 /24 /13 □ /11 /20 /57
/11 /27 /31 □ /23 /14 /11 /11 /22 /18
/72 /11 □ /22 /13 /12 /36 /25 /13 □ /22 /13 /18 /32 /11 /20 /18 /13 □ /27 /16 /24 /13 /21 /11 /22 □ /31 /11 /24 /13 □ /36 /18 /13
/44
/73 /74 /64 /75 /61 □ /76 /77 /75 /63 □ /73 /78 /67 □ /49 /68 /66 /66 /79 □ /51 /79 /77 /80 /76 /77
/75 /63 □ /81 /73 /78 □ /82 /64 □ /73 /67 /67 /64 /67 □ /75 /66 □ /75 /60 /64 /65 /66 /67 /64 /68 □ /69 /70 /83
/49 /68 /66 /66 /79 □ /51 /79 /77 /80 □ /76 /77 /75 /63 □ /48 /78 /81 /68 /62 /67 /64 /84 /17 /11 /14 /16 /18 /31 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /27 /22 /16 /24 □ /22 /16 /20 /86 □ /23 /11 /22 /27
/31 /13 □ /23 /14 /11 /11 /22 /34
/15 /27 /19 /16 /20 /14 /13 /18 /18 □ /18 /27 /13 /13 /14 □ /23 /16 /14 /14 /13 /22 □ /18 /31 /13 /13 /27 □ /33 /16 /27 /31 /20
/16 /32 /32 /14 /13 /18 □ /33 /31 /13 /22 /13 □ /38 /11 /36 □ /32 /19 /18 /18 □ /27 /31 /22 /11 /36 /86 /31 /27 /31 /13 □ /23 /14 /11 /11 /22 /34
/17 /11 /14 /16 /18 /31 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /27 /22 /16 /24 □ /22 /16 /20 /86 □ /23 /11 /22 /27
/31 /13 □ /25 /13 /16 /14 /16 /20 /86 /34
/44 /73 /74 /64 /75 /61 □ /76 /77 /75 /63 □ /77 /78 /81 /68 /62 /67 /64 /84 /17 /11 /14 /16 /18 /31 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /27 /22 /16 /24 □ /22 /16 /20 /86 □ /23 /11 /22 /27
/31 /13 □ /23 /14 /11 /11 /22 □ /19 /20 /12 □ /18 /27 /19 /16 /20 /14 /13 /18 /18 □ /18 /27 /13 /13 /14 □ /23 /16 /14 /14 /13 /22 /18 /31 /13 /13 /27 □ /33 /31 /13 /22 /13 □ /38 /11 /36 □ /32 /19 /18 /18 □ /27 /31 /22 /11 /36 /86 /31 □ /27 /31 /13 /23 /14 /11 /11 /22 /34
/9 □ /32 /11 /14 /16 /18 /31 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /27 /22 /16 /24 □ /22 /16 /20 /86 /23
/11 /22 □ /27 /31 /13 □ /25 /13 /16 /14 /16 /20 /86 /34 /41 /31 /22 /11 /24 /13 □ /18 /27 /19 /20 /25 /31 /16 /11 /20 /18 /0 /87 □ /86 /19 /34 □ /18 /27 /19 /16 /20 /14 /13 /18 /18 □ /18 /27 /13 /13 /14 □ /24 /13 /18 /31 □ /86 /36 /19 /22 /12 /18 /41 /31 /22 /11 /24 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /18 /13 /14 /23 /88 /25 /14 /11 /18 /16 /20 /86 /86
/19 /27 /13 /34
/41 /31 /22 /11 /24 /13 /12 □ /25 /19 /18 /27 □ /57 /22 /11 /20 /85 /13 □ /31 /19 /20 /12 /22 /19 /16 /14 □ /19 /20 /12 /14
/11 /25 /30 /88 /11 /36 /27 /34
/41 /14 /16 /25 /30 □ /16 /24 /19 /86 /13 □ /23 /11 /22 □ /14 /19 /22 /86 /13 /22 □ /89 /16 /13 /33 /10/25 /26 /20 /27 /16 /22 /13 □ /28 /22 /19 /18 /18 □ /29/11 /22 /30 /18 /4 □ /26 /20 /25 /34 /0 /87 □ /43/90/91/9/41/92□ /15/72 /91/92/92/72 /4 □ /15/90/10 /92/91/93/26 /94 /94 /92/4 □ /10 /9□ /95 /1 /0 /87 /8 □ /42/15/9 /47 /52 /53 /51 /50 /47 /51 /84 □ /96 /97 /69 /98 /99 □ /100 /98 /101 /102 /69 /69 /103 /101 □ /104 □ /45 /56 /50 /53 /51 /84 □ /96 /97 /69 /98 /99 □ /103 /105 /98 /102 /69 /100 /69 /70 □ /104 □ /46 /65/50 /48 /56 /84 □/50 /46 /50 /53 /51 /106 /52 /53 /107 /108/44 /56 /48 /109 /46 /45 /52 /56 /46 /83 /47 /52 /65 □ /45
/56 /50 /53 /51 □ /49 /50 /110 /84 □ /96 /97 /69 /98 /99 □ /103 /105 /98 /102 /105 /105 /97 /97 □ /104 □ /52 /49 /49 /48 /47 /46 □ /49 /50 /110 /84 □ /96 /70 /98 /100 /99 □ /111 /97 /70 /102 /105 /103 /69 /100 □ □ □ □
□
/10/9
/112 /92 □ /26 /58 □ /72 /43 /92 □ /42 /15 /9
. . . . . .

Stationary Pole .

Is available In any length. . Diameter is determined by Landing Mat . length of pole. ~ Comes 2" thick and 32" . Pole material is oold drawn in diameter. Mats can brass alloy C260 or stainless be dovetailed at no steel. Comes with floor nan~, extra oost. . ceiling flange and Landing at. ASTM-0 1056-85 Grade 2C2-E1, dosed-
cell black neoprene
.
.
.
□
/26 /15 /16 /32 /3 /6 /8
/37 /38 /39 /40 /41 /39 /42 /41 □ /44 /45 /42 /46 □ /37 /38 /39 /38 /45 /47 /40 □ /48/39 /49 /49 □ /50/47 /51 /40 /38 □ /52 /47 /53 /54 /46 /42 /55 GearGrid's Wall Mount Lockers are the strongest and most versati le line of fire lockers available. Our patented design promotes maximum air movement, which minimizes odor build-up and allows damp items to dry faster. /0 /1 /2 /3 /4 /5 /6 /2 /2 /7 □ /9 /2 /10 /11 /12 /13 /11 /14 □ /4 /15 /13 /9 /13 /11 /16 /12 /4 /17 □ /12 /18 /4 □ /11 /4 /4 /19 □ /20 /2 /7 □ /17 /4 /21 /16 /7 /16 /12 /4 □ /1 /16 /17 /4 □ /16 /11 /19 □ /9 /16 /22 /4 /17 □ /23 /15 /4 /16 /11 /13 /11 /14 □ /4 /16 /17 /13 /4 /7 □ /12 /18 /16 /11 □ /4 /3 /4 /7 /24 /25
/4 /16 /7 /25 /7 /13 /19 □ /2 /20 /20 /4 /7 /17 □ /23 /2 /9 /21 /15 /4 /12 /4 □ /23 /10 /17 /12 /2 /9 /13 /26 /16 /12 /13 /2 /11 □ /2 /20 □ /2 /10 /7 □ /15 /2 /23 /22 /4 /7 /17 □ /12 /2 □ /9 /16 /12 /23 /18 □ /27 /2 /10 /7 □ /19 /4 /17 /13 /14 /11 □ /17 /21 /4 /23 /13 /28 /23 /16 /12 /13 /2 /11 /17 /29 □ /17 /2 □ /27 /2 /10 /23 /16 /11 □ /1 /10 /13 /15 /19 □ /27 /2 /10 /7 □ /15 /2 /23 /22 /4 /7 □ /17 /27 /17 /12 /4 /9 □ /13 /11 □ /16 /11 /27 □ /23 /2 /9 /1 /13 /11 /16 /12 /13 /2 /11 /24 /30 /31 /32 □ /33 □ /34 □ /35 /36 /32 □ /37 □ /34 □ /38 /35 /32 □ /39 /35
/36 /32 □ /33 □ /34 □ /35 /36 /32 □ /37 □ /34 □ /38 /35 /32 □ /39 /35 /40 /32 □ /33 □ /34 □ /35 /36 /32 □ /37 □ /34 □ /38 /35 /32 □ /39 /35 /40 /32 □ /33 □ /34 □ /35 /40 /32 □ /37 □ /34 □ /38 /35 /32 □ /39 /35 /40 /41 □ /33 □ /34 □ /42 /35 /41 □ /37 □ /34 □ /38 /35 /41 □ /39 □ /42 /36 /41 □ /33 □ /34 □ /35 /40 /41 □ /37 □ /34 □ /38 /35 /41 □ /39 □ /42 /43 /41 □ /33 □ /34 □ /35 /40 /41 □ /37 □ /34 □ /38 /35 /41 □ /39 □ /44 /45 /11 /23 /15 /10 /19 /4 /17 □ /46 /2 /21 /5 /47 /13 /19 /4 □ /47 /12 /2 /7 /16 /14 /4 □ /47 /18 /4 /15 /20 /24 □ /48 /2 /12 □ /16 /3 /16 /13 /15 /16 /1 /15 /4 □ /49 /13 /12 /18 □ /47 /4 /23 /10 /7 /4 □ /37 /2 /2 /7 □ /2 /21 /12 /13 /2 /11 /24 /50 /51 /52 /53 /54 /55 /56 □ /39 /4 /16 /3 /27 /5 /19 /10 /12 /27 □ /30 /5 /57 /41 □ /17 /12 /4 /4 /15 □ /12 /10 /1 /13 /11 /14 /58 /59 /60 /55 □ /62 □ /63 /53 /64 /65 □ /66 /52 /59 /60 /67 /56 □ /39 /13 /14 /18 /5 /17 /12 /7 /4 /11 /14 /12 /18 □ /57 /41 □ /49 /13 /7 /4 /29 □ /42 /32 □ /34 □ /42 /32 □ /17 /68 /10 /16 /7 /4 □ /14 /7 /13 /19 □ /21 /16 /12 /12 /4 /7 /11 /58 /55 /64 /69 /52 /55 □ /70 /71 /71 /52 /67 □ /72 /73 /74 /75 /59 /71 /76 /53 /77 /78 /56 □ /39 /4 /16 /3 /27 /5 /19 /10 /12 /27 /29 □ /49 /4 /15 /19 /4 /19 □ /30 /5 /57 /41 □ /79 /37 /29 □ /30 /43 /5 /14 /16 /10 /14 /4 □ /17 /12 /4 /4 /15 □ /12 /10 /1 /4 □ /49 /13 /12 /18 □ /42 /32 □ /34 □ /42 /32 □ /17 /68 /10 /16 /7 /4 /14
/7 /13 /19 □ /13 /11 /28 /15 /15
/58 /80 /55 /77 /81 /55 /67 /82 /83 /71 /71 /65 /67 /56 □ /46 /49 /2 □ /17 /18 /4 /15 /3 /4 /17 □ /23 /2 /11 /17 /12 /7 /10 /23 /12 /4 /19 □ /2 /20 □ /18 /13 /14 /18 /5 /17 /12 /7 /4 /11 /14 /12 /18 □ /57 /41 □ /49 /13 /7 /4 /29 □ /16 /11 /19 □ /12 /18 /7 /4 /4 □ /16 /21 /21 /16 /7 /4 /15 □ /18 /2 /2 /22 /17 □ /21 /4 /7 /15
/2 /23 /22 /4 /7 □ /2 /21 /4 /11 /13 /11 /14
/84 /60 /85 /69 /67 /75 /53 /86 /59 /77 /59 /75 /87 /56 □ /33 /13 /7 /4 □ /17 /18 /4 /15 /3 /4 /17 □ /16 /19 /88 /10 /17 /12 /16 /1 /15 /4 □ /13 /11 □ /42 /32 □ /13 /11 /23 /7 /4 /9 /4 /11 /12 /17 /89 /53 /54 /55 /74 /77 /53 /75 /55 □ /83 /71 /77 /60 /55 /52 /56 □ /35 /36 /5 /14 /16 /10 /14 /4 □ /17 /18 /4 /4 /12 □ /9 /4 /12 /16 /15 /24 □ /35 /32 □ /34 □ /30 /43 /5 /30 /30 /90 /30 /43 /32 □ /48 /16 /9 /4 /21 /15 /16 /12 /4 □ /39 /2 /15 /19 /4 /7 □ /20 /2 /7 □ /35 /36 /32 /29 □ /35 /40 /32 /29 □ /42 /36 /32 □ /91 /42
/43 /32 □ /15 /2 /23 /22 /4 /7 /17 □ /49 /13 /12 /18 /2 /10 /12 □ /47 /4 /23 /10 /7 /4 □ /37 /2 /2 /7 /17 /24 □ /35 /32 □ /34 □ /30 /35 /5 /30 /90 /31 /32 □ /48 /16 /9 /4 /21 /15 /16 /12 /4 □ /39 /2 /15 /19 /4 /7 □ /20 /2 /7 □ /30 /31 /32 □ /15 /2 /23 /22 /4 /7 /17 □ /49 /13 /12 /18 □ /91 □ /49 /13 /12 /18 /2 /10 /12 /47 /4 /23 /10 /7 /4 □ /37 /2 /2 /7 /17 □ /16 /11 /19 □ /35 /36 /32 /29 □ /35 /40 /32 □ /91 □ /42 /36 /32 □ /15 /2 /23 /22 /4 /7 /17 □ /49 /13 /12 /18 □ /47 /4 /23 /10 /7 /4 □ /37 /2 /2 /7 /17 /24 □ /79 /11 □ /15 /2 /23 /22 /4 /7 /17 □ /49 /13 /12 /18 /2 /10 /12 □ /19 /2 /2 /7 /17 /29 □ /12 /18 /4 /48 /16 /9 /4 /21 /15 /16 /12 /4 □ /39 /2 /15 /19 /4 /7 □ /13 /17 □ /21 /15 /16 /23 /4 /19 □ /2 /11 □ /12 /18 /4 □ /16 /19 /88 /10 /17 /12 /16 /1 /15 /4 □ /46 /2 /21 □ /47 /18 /4 /15 /20 /24 □ /79 /11 □ /15 /2 /23 /22 /4 /7 /17 □ /49 /13 /12 /18 □ /19 /2 /2 /7 /17 /29 □ /12 /18 /4 □ /48 /16 /9 /4 /21 /15 /16 /12 /4 /39 /2 /15 /19 /4 /7 □ /13 /17 □ /21 /15 /16 /23 /4 /19 □ /2 /11 □ /12 /18 /4 □ /47 /4 /23 /10 /7 /4 □ /37 /2 /2 /7 /24 □ /92 /48 /2 /12 /4 /93 □ /94 /10 /17 /12 /2 /9 □ /21 /7 /13 /11 /12 /4 /19 □ /11 /16 /9 /4 /21 /15 /16 /12 /4 □ /17 /2 /15 /19 □ /17 /4 /21 /16 /7 /16 /12 /4 /15 /27 /24 /95 /71 /69 /76 /75 /59 /76 /96 □ /63 /52 /53 /64 /65 /55 /75 /67 /56 □ /30 /30 /5 /14 /16 /10 /14 /4 □ /17 /12 /4 /4 /15 □ /49 /16 /15 /15 □ /9 /2 /10 /11 /12 □ /1 /7 /16 /23 /22 /4 /12 /17 /51 /59 /76 /59 /67 /80 /56 □ /47 /10 /21 /4 /7 □ /37 /10 /7 /16 /1 /15 /4 □ /46 /25 /45 /94 □ /21 /2 /49 /19 /4 /7 □ /23 /2 /16 /12 /98 /71 /77 /71 /52 /67 /56 □ /38 □ /17 /12 /16 /11 /19 /16 /7 /19 □ /23 /2 /15 /2 /7 /17 □
□
□ /44 /18 /12 /12 /21 /17 /93 /90 /90 /49 /49 /49 /24 /15 /13 /11 /22 /4 /19 /13 /11 /24 /23 /2 /9 /90 /17 /18 /16 /7 /4 /0 /7 /12 /13 /23 /15 /4 /99 /9 /13 /11 /13 /100 /12 /7 /10 /4 /91 /10 /7 /15 /100 /18 /12 /12 /21 /17 /93 /90 /90 /49 /49 /49 /24 /14 /4 /16 /7 /14 /7 /13 /19 /24 /23 /2 /9 /90 /21 /7 /2 /19 /10 /23 /12 /90 /49 /16 /15 /15 /5 /9 /2 /10 /11 /12 /5 /15 /2 /23 /22 /4 /7 /17 /90 /91 /12 /13 /12 /15 /4 /100 /47 /12 /16 /11 /19 /16 /7 /19 □ /101 /13 /7 /4 □ /47 /12 /16 /12 /13 /2 /11 □ /33 /16 /15 /15 □ /102 /2 /10 /11 /12 □ /103 /2 /23 /22 /4 /7 /17 /50 /104
/37 /105 /47 /94 /106 /45 /107 /46 /45 /79 /48 /106 /105 /108 /109 /105 /47 /46 □ /45 /48 /101 /79 /106 /102 /0 /46 /45 /79 /48 /106 /105 /108 /109 /105 /47 /46 □ /45 /48 /101 /79 /44 /18 /12 /12 /21 /17
Available Sizes:

Design Features:
•
•
•
•
•
•
•
•
•
FIXTURES, FURNITURE & EQUIPMENT
FIRE STATION 12 (PLATINUM TRIANGLE)
Item Product Number Website
Oven (Viking 48") VGCC5486GSS http://www.designerhomesurplus.com/Viking/VGCC5486GSS‐237596.php?ref=6210&adGroup=VikingOver&gclid=EAIaIQobChMIjJe0gfaH2AIVgtlkCh2GngtmEAYYAiABEgKCnPD_BwE Freezer
TS‐23‐HC
https://www.hotelrestaurantsupply.com/TRU‐TS‐23‐HC.html?utm_source=froogle&utm_medium=shopping&utm_campaign=products&gclid=EAIaIQobChMI6_‐u_7a_1wIVCP5kCh3GiAZ8EAYYBCABEgJbB_D_BwE Refrigerator
TS‐49‐HC
https://www.hotelrestaurantsupply.com/TRU‐TS‐49‐HC.html?utm_source=froogle&utm_medium=shopping&utm_campaign=products&gclid=EAIaIQobChMIrZ7vhLa_1wIVDtlkCh0JKAZ0EAYYCCABEgJgefD_BwE 48" Hood System
VCWH54848SS
http://www.abt.com/product/76062/Viking‐Professional‐Series‐48‐Stainless‐Steel‐Chimney‐Wall‐Hood‐VCWH54848SS.html Microwave GE Profile PEB7226SFSS
http://www.abt.com/product/116004/GE‐Profile‐Stainless‐Steel‐Countertop‐Microwave‐Oven‐ PES7227SLSS.html?utm_source=google&utm_medium=sc&utm_campaign=PES7227SLSS&camptype=cpcUSGooglePLA&pt_source=google&pt_medium=sc&pt_campaign=%5bPLA%5d%20%5bUS%5d%20Long% Dishwasher
DBI663PHS
https://www.homedepot.com/p/KitchenAid‐Architect‐Series‐II‐Top‐Control‐Dishwasher‐in‐Stainless‐Steel‐with‐Stainless‐Steel‐Tub‐Ultra‐Fine‐Filter‐43‐dBA‐KDTM354DSS/205397273 Barbecue
66010001
https://www.amazon.com/Weber‐66010001‐Genesis‐Natural‐Grill/dp/B01JIRHUK8/ref=sr_1_6?ie=UTF8&qid=1510707767&sr=8‐6&keywords=natural+gas+barbecue+grills&dpID=41Lu84JzO9L&preST=_SY300_QL70_&dpSrc=srch Barbecue Cover
7130
https://www.amazon.com/gp/product/B01IF1GT3W/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1 Coffeemaker
38700.0009
https://www.amazon.com/38700‐0009‐Automatic‐Commercial‐Coffee‐Warmers/dp/B0012XQRPG/ref=sr_1_fkmr0_2?ie=UTF8&qid=1510718479&sr=8‐2‐fkmr0&keywords=pre+plummed+bunn+coffee+maker Coffee Pot
42400.0103
https://www.amazon.com/BUNN‐42400‐010300000002‐Commercial‐Decanter‐Handle/dp/B00UZ2BZ70/ref=pd_sim_79_4?_encoding=UTF8&psc=1&refRID=1JK2Q74B1685H91D4EAZ Kitchen Ice Machine
C‐101BAH‐AD
https://www.icemachinesdirect.com/shop/c‐101bah‐under‐counter‐nugget‐ice‐machine‐up‐to‐92‐lbs‐per‐day‐copy/ Kitchen Table TBD Vendor to be determined by AF&R
Apparatus Floor Ice Machine KML‐325MAJ
Sun Shade TBD https://www.icemachinesdirect.com/shop/hoshizaki‐model‐kml‐325maj‐copy‐2/ Captain TV & Mount Premier 829973086480
Gym TV & Mount Premier 829973086480
Kitchen TV & Mount Premier 829973086480
Dayroom TV
Turnout Extractor UW3PV
Turnout Dryer
https://www.pwslaundrywest.com/i‐22306119‐speed‐queen‐ltee5asp173tw01‐stack‐washer‐dryer‐22‐18‐lb‐capacity‐electric.html?utm_source=Google&utm_medium=cse&utm_term=LTEE5ASP173TW01&gclid=EAIaIQobChMI9‐ fV9vbs2AIVSY1‐Ch3kvQ5OEAkYBCABEgLuqvD_BwE
Stackable Washers
https://www.pwslaundrywest.com/i‐22306119‐speed‐queen‐ltee5asp173tw01‐stack‐washer‐dryer‐22‐18‐lb‐capacity‐electric.html?utm_source=Google&utm_medium=cse&utm_term=LTEE5ASP173TW01&gclid=EAIaIQobChMI9‐ fV9vbs2AIVSY1‐Ch3kvQ5OEAkYBCABEgLuqvD_BwE
Tool Box

COMMERCIAL-TYPE COOKING POWER
§ EXCLUSIVE – VSH™ (VariSimmer-to-high) Pro sealed burner system § TruP
owerPlus™ 18,500 BTU front right burner
§ All other burners are 15,000 BTUs
§ EXCL
USIVE – VariSimmer setting for all burners
§ EXCL
USIVE – all burners equipped with SureSpark ignition system for consistent and reliable ignition
§ Automatic re-ignition; surface burners light at any position on the knob and re-light if e
xtinguished, even on lowest setting
§ Heavy-duty BlackChrome™ knobs and square bezels shipped standard § EXCL
USIVE – combination of single 30,000 BTU U-shaped burner and infrared broiler with SureSpark ignition system; left oven in 48” wide model has one 15,000 BTU burner
§ Gourmet-Glo infrared broiler provides intense searing heat for broiling applications (right oven only in 48” wide model)
§ Large-capacity oven with six rack positions (see specifications for oven interior dimensions)
§ Six functions – natural airflow bake
, convection bake, infrared broil,
convection infrared broil, convection dehydrate, and convection defrost (right oven only in 48” wide model)
§ All convection modes utilize the ProFlow™ convection air baffle, which is specifically designed to ensure balanced airflow for even heat distribution § EXCL
USIVE – Gentle Close™ Door allows door to close slowly
§ Larger window opening
§ Convection fan switch conveniently located on control panel § Two halogen oven lights for e
xcellent visibility throughout the
oven cavity

EASY OPERATION AND CLEANUP
§ EXCLUSIVE – one-piece tooled and porcelainized cooking surface for easy cleanup
§ Burner caps are easily removable for quick cleaning
§ Heavy-duty, porcelainized, cast-iron removable surface grates provide continuous front-to-rear
, left-to-right surface
for easy movement of large pots

MODEL NUMBERS
§ VGR5488B – 48”W. Gas Range; eight burners
§ VGR5486G
– 48”W. Gas Range; six burners with griddle
§ VGR5606GQ
– 60”W. Gas Range; six burners with griddle
and grill

WARRANTY
§ 2-year full – complete product
§ 90-day full – cosmetic parts
such as glass, painted items
and decorative items
§ 5-year limited – gas burners

ACCESSORIES
§ BG8548SS – 8”H. back guard
for 48” range
§ BG8560SS – 8”H. back
guard
for 60” range
§ HS245480SS – high shelf for
48” range
§ HS24560SS – high shelf for
60” range
§ P24CST
SS – countertop side
trim (2 pieces)

COLOR FINISHES
§ Stainless Steel (SS), Black (BK),
and White (WH)

§ Available in 14 e
xclusive color
finishes Alluvial Blue (AB), Arctic
Gray (AG), Black Forest Green
(BF), Bywater Blue (BW), Cast
Black (CS), Cypress Green (CY),
Damascus Gray (DG), Frost
White, (FW) Kalamata Red (KA),
Pacific Gray (PG), Reduction
Red (RE), Slate Blue (SB), San
Marzano Red (SM), Vanilla
Cream (VC)
§ P48CRT SS – countertop rear
trim for 48” range
§ P60CRT
SS – countertop rear
trim for 60” range
§ P48CBF4SS – curb base and
custom curb base front for 48”
range
§ LPKPDR – LP/Propane
Conversion Kit
5 SERIES 48” AND 60”W. GAS RANGES
Viking Professional 5 Series – VGR
(VIKINGl _______ _
■
35-7/8”(91.1 cm) min.
to
37”(94.0 cm) max.
1” (2.5 cm)
29-7/8”
(75.9 cm)
35-7/8”
(91.1 cm)
47-7/8”
(121.6 cm)
60”(152.4 cm)
“A” Dimension
48” 48” (121.9 cm)
60” 60-1/8” (152.7 cm)
25-3/4” (65.4 cm)
45-1/8” (114.6 cm)
19-3/8”
(49.2 cm)
8-1/8”
(20.6 cm)
26-7/16” (67.2 cm)
1-5/8”
(4.1 cm)
1” (2.5 cm)
35-7/8”
(91.1 cm) min.
to
37”
(94.0 cm) max.
24-5/16” (61.8 cm)
28-1/16” (71.2 cm)
GAS 48“ AND 60“ W. RANGES
DESCRIPTION VGR548 VGR560
Overall Width 47-7/8” (121.6 cm) 60” (152.4 cm)
Overall Height
from Bottom
Base Height
To top of side trim – minimum 35-7/8” (91.1 cm) to maximum 37” (94 cm); legs adjust 1-1/8” (2.9 cm) Additions to Base Height
To top of island trim – add 1” (2.5 cm); to top of backguard – add 8” (15.2 cm); to top of high shelf – add 23 1/2” (59.7 cm) Overall Depth from Rear To end of side panel – 24 5/16” (61.8 cm); to front of door – 25-3/4” (65.4 cm); to end of door handle – 28-11/16” (72.9 cm) Surface Burner Rating Natural Gas: 15,000 BTU (4.4 kW); 18,500 BTU (5.4 kW) LP: 12,500 BTU (3.7 kW); 16,600 BTU (4.9 kW)
Griddle Burner Rating 12” wide – 15,000 BTU NAT./12,500 BTU LP (4.4 kW NAT./3.7 kW LP) Grill Burner Rating – 18,000 BTU NAT./16,000 BTU LP (5.3 kW NAT./4.7 kW LP) Gas Requirements Shipped natural or LP/Propane gas; field convertible with conversion kit (purchased separately); accepts standard residential 1/2” (1.3 cm) ID gas service line Electrical Requirements 120VAC/60Hz; 4 ft. (121.9 cm), 3-wire cord with grounded 3-prong plug attached to product Maximum Amp Usage 2.0 amps 2.0 amps
Broil Burner 18,000 BTU NAT./16,000 BTU LP (5.3 kW NAT./4.7 kW LP) Bake Burner Right Oven: 30,000 BTU NAT./LP (8.8 kW NAT./LP) Left Oven: 15,000 BTU NAT./LP (4.4 kW NAT./LP)
Both Ovens: 30,000 BTU NAT./LP (8.8 kW NAT./LP)
Oven Interior
Dimensions
Right Oven – Convection Bake/Broil
Overall Width – 23” (58.4 cm);
Height – 16-1/8” (41.0 cm)
Depth – 18-3/4” (47.6 cm);
Overall Size – 4.0 cu. ft.

AHAM Standard* – 3.7 cu. ft.
3 racks, 6 rack positions
Left Oven – Bake
Overall Width – 12-1/8” (30.8 cm); Height – 16-1/8” (41.0 cm) Depth – 18-3/4” (47.6 cm);
Overall Size – 2.1 cu. ft.

AHAM Standard* – 2.0 cu. ft.
2 racks, 6 rack positions
Convection Bake/Broil (both ovens)
Overall Width – 23” (58.4 cm);
Height – 16-1/8” (41.0 cm)
Depth – 18-3/4” (47.6 cm);
Overall Size – 4.0 cu. ft.

AHAM Standard* – 3.7 cu. ft.
3 racks, 6 rack positions
Approximate Shipping
Weight
575 lb. (258.8 kg) 750 lb. (337.5 kg)
Please do not prepare installation from brochure data only. See installation instructions for important clearance/installation information. **The AHAM Standard for measuring oven capacity subtracts the door plug and convection baffle dimension from the total oven volume. 42” m
in.
(106.7 cm
)
13” m
ax.

(33.0 cm
)
6” m
in.(15.2 cm
)
18” m
in.
(45.7 cm)
3/8”

(0.95 cm
)
36”
(91.4 cm
)
29-7/8”
(75.9 cm
)
A(opening w
idth)
F60351B 0121
For detailed product information, model numbers, or to request a quote call 1-888-845-4641 or visit vikingrange.com © 2020 Viking Range, LLC All rights reserved. Specifications subject to change without notice.

VIKING RANGE, LLC 111 FRONT STREET GREENWOOD, MISSISSIPPI 38930 USA 5 SERIES 48” AND 60”W. GAS RANGES
Viking Professional 5 Series – VGR
(VIKINGl ---------
(VnaNGt
Specifications subject to change without notice.

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

ROUGH-IN DATA
Model:

Project Name:

Location:

Item #: Qty:

Model #:

AIA #
SIS #2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com Printed in U.S.A.

APPROVALS: AVAILABLE AT:

TRUE MANUFACTURING CO., INC.

U.S.A. FOODSERVICE DIVISION
T-23F-HC
T-Series:

Reach-In Solid Swing Door Freezer with Hydrocarbon Refrigerant T -23F-HC
True’s solid door reach-in’s are designed
with enduring quality that protects
your long term investment.
Designed using the highest quality
materials and components to
provide the user with colder product
temperatures, lower utility costs,
exceptional food safety and the
best value in today’s food service
marketplace.
Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser maintains -10°F
(-23.3°C) cabinet temperatures. Ideally
suited for both frozen foods and ice
cream.
Stainless steel solid door and front. The
very finest stainless with higher tensile
strength for fewer dents and scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion
type closure system.
Automatic defrost system time-
initiated, temperature-terminated.

Saves energy consumption and
provides shortest possible defrost cycle.

Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest, most
grease free area of kitchen.
Easily accessible condenser coil for
cleaning.

Model Doors Shelves
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.

Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)W D H*
T-23F-HC 1 3 27 291/2 783/8 1/2 115/60/1 3.7 5-15P 9 295 686 750 1991 1/2 220-240V/50Hz 2.2 ▲ 2.74 134
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs. ▲Plug type varies by country.

INNOVATION

MADE WITH

IN THE USA
5/20
ln:,,e ®
-
*
~ @)B c®us V ( E Q nat~ral ~ -::- ~ ' refrigerant

STANDARD FEATURES
Model:

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

PLAN VIEW
KCL
TRUE MANUFACTURING CO., INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com T-23F-HC
T-Series:

Reach-In Solid Swing Door Freezer with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
T-23F-HC TFEY53E TFEY03S TFEY03P TFEY633
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, lower utility costs, exceptional
food safety and the best value in today’s food
service marketplace.

REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
R290 hydro carbon refrigerant that has zero (0)
ozone depletion potential (ODP), & three (3)
global warming potential (GWP).
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains -10°F (-23.3°C). Ideally suited for both
frozen foods and ice cream.
• State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak efficiencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
• Bottom mounted condensing unit positioned
for easy cleaning. Compressor runs in coolest
and most grease free area of the kitchen. Allows
for storage area on top of unit.
• Automatic defrost system time-initiated,
temperature-terminated. Saves energy
consumption and provides shortest possible
defrost cycle.

CABINET CONSTRUCTION
• Exterior - Stainless steel front. Anodized quality
aluminum ends. Corrosion resistant GalFan
coated steel back.
• Interior - attractive, NSF approved, clear coated
aluminum liner. Stainless steel floor with coved
corners.
• Insulation - entire cabinet structure and solid
door are foamed-in-place using a high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global
warming potential (GWP).
• Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
• Frame rail fitted with 4" (102 mm) diameter stem
castors - locks provided on front set.

DOOR
• Stainless steel exterior with clear aluminum
liner to match cabinet interior. Door extend full
width of cabinet shell. Door lock standard.
• Lifetime guaranteed recessed door handle. Door
fitted with 12" (305 mm) long recessed handle
that is foamed-in-place with a sheet metal
interlock to ensure permanent attachment.
• Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gasket of one piece construction,
removable without tools for ease of cleaning.

SHELVING
• Three (3) adjustable, heavy duty PVC coated
wire shelves 22 7/8"L x 23 1/4"D (582 mm x
591 mm). Four (4) chrome plated shelf clips
included per shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on 1/2"
(13 mm) increments.

LIGHTING
• Interior lighting - safety shielded. Lights
activated by rocker switch mounted above door.

MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• Rear airflow guards prevent product from
blocking optimal airflow.
• NSF/ANSI Standard 7 compliant for open food
product.

ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.

OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 220-240V/50Hz
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/flanged legs.
❑ Alternate door hinging (factory installed).
❑ Novelty baskets.
❑ Additional shelves.

ELEVATION PLAN VIEW
27"
(686 mm)
551/32"
(1398 mm)
2517/32"
(649 mm)
291/2"
(750 mm)
835/16"
(2117 mm)
785/16"
(1990 mm)
5"
(127 mm)
7615/16"
(1955 mm)
13/8"
(35 mm) 4"
(102 mm)
(U.S.A. only)
--
j
1 3 1112111
PARTS+ LABOR COMPRESSOR

WARRANTY
-
[
[¥ ~
'
J
i t
~ 115/60/1
\!_!I NEMA-5-15R
Specifications subject to change without notice.

Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).

ROUGH-IN DATA
Model:

Project Name:

Location:

Item #: Qty:

Model #:

AIA #
SIS #
TRUE MANUFACTURING CO., INC.

U.S.A. FOODSERVICE DIVISION
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com Printed in U.S.A.

APPROVALS: AVAILABLE AT:

T-49-HC
T-Series:

Reach-In Solid Swing Door Refrigerator with Hydrocarbon Refrigerant T -49-HC
Model Doors Shelves
Cabinet Dimensions
(inches)
(mm)
HP Voltage Amps
NEMA
Config.

Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)W D H*
T-49-HC 2 6 541/8 291/2 783/8 1/2 115/60/1 5.4 5-15P 9 450 1375 750 1991 1/3 230-240/50/1 2.4 ▲ 2.74 205
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs. ▲ Plug type varies by country. True’s solid door reach-in’s are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs, exceptional food safety
and the best value in today’s food
service marketplace.
Factory engineered, self-contained,
capillary tube system using
environmentally friendly R290
hydro carbon refrigerant that has
zero (0) ozone depletion potential
(ODP), & three (3) global warming
potential (GWP).
High capacity, factory balanced
refrigeration system that maintains
cabinet temperatures of 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.

Lifetime guaranteed door hinges
and torsion type closure system.

Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil for
cleaning.

INNOVATION

MADE WITH

IN THE USA
5/21
ln:,,e ®
-
J
*
~~ w I --; 111 ~®us m o not~rol ...... -. ~ · refrigerant

STANDARD FEATURES
Model:

METRIC DIMENSIONS ROUNDED UP TO THE

NEAREST WHOLE MILLIMETER

SPECIFICATIONS SUBJECT TO CHANGE

WITHOUT NOTICE

ELEVATION PLAN VIEW
835/16"
(2117 mm)
785/16"
(1990 mm)
5"
(127 mm)
541/8"
(1375 mm)
291/2"
(750 mm)
2517/32"
(649 mm)
551/32"
(1398 mm)
13/8"
(35 mm)
7615/16"
(1955 mm)
4"
(102 mm)
T-49-HC
T-Series:

Reach-In Solid Swing Door Refrigerator with
Hydrocarbon Refrigerant
Model Elevation Right Plan 3D Back
T-49-HC
DESIGN
• True’s commitment to using the highest
quality materials and over sized refrigeration
systems provides the user with colder
product temperatures, lower utility costs,
exceptional food safety and the best value in
today’s food service marketplace.

REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
R290 hydro carbon refrigerant that has zero
(0) ozone depletion potential (ODP), & three
(3) global warming potential (GWP).
• High capacity, factory balanced refrigeration
system that maintains cabinet temperatures
of 33°F to 38°F (.5°C to 3.3°C) for the best in
food preservation.
• State of the art, electronically commutated
evaporator and condenser fan motors. ECM
motors operate at higher peak efficiencies
and move a more consistent volume of air
which produces less heat, reduces energy
consumption and provides greater motor
reliability.
• Bottom mounted condensing unit positioned
for easy maintenance. Compressor runs in
coolest and most grease free area of the
kitchen. Allows for storage area on top of unit.

CABINET CONSTRUCTION
• Exterior - Stainless steel front. Anodized
quality aluminum ends. Corrosion resistant
GalFan coated steel back.
• Interior - attractive, clear coated aluminum
liner. Stainless steel floor with coved corners.
• Insulation - entire cabinet structure and
solid door are foamed-in-place using a high
density, polyurethane insulation that has zero
ozone depletion potential (ODP) and zero
global warming potential (GWP).
• Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
• Frame rail fitted with 4" (102 mm) diameter
stem castors - locks provided on front set.

DOORS
• Stainless steel exterior with clear aluminum
liner to match cabinet interior. Doors extend
full width of cabinet shell. Door locks
standard.
• Lifetime guaranteed recessed door handles.

Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place with
a sheet metal interlock to ensure permanent
attachment.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.

SHELVING
• Six (6) adjustable, heavy duty PVC coated wire
shelves 24 9/16"L x 22 3/8"D (624 mm x 569 mm).

Four (4) chrome plated shelf clips included
per shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on
1/2" (13 mm) increments.

LIGHTING
• LED Interior lighting - safety shielded. Lights
activated by rocker switch mounted above
doors.

MODEL FEATURES
• Exterior temperature display.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF/ANSI Standard 7 compliant for open food
product.

ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase, 15 amp dedicated outlet. Cord and
plug set included.

OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑ 230 - 240V / 50 Hz.
❑ 6" (153 mm) standard legs.
❑ 6" (153 mm) seismic/flanged legs.
❑ 2 1/2" (64 mm) standard legs.
❑ Alternate door hinging (factory installed).
❑ Half door bun tray racks. Each holds up to
eleven 18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately).
❑ Full door bun tray racks. Each holds up to
twenty-two 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
(U.S.A. and Canada only)
' '
I
"
' I_I
j J
3 1112111
PARTS+ I.ABOR COMPRESSOR

WARRANTY
-
J [
(
~
~
L
~ 115/60/1
\!..!I NEMA-5-15R
I I

APPEARANCE AND DESIGN
§Backlit LED knobs extend and illuminate to control lighting level and fan speed, then fully r
etract when not in use
§Seamless design provides a r
efined finish to your kitchen
§Tough-box ventilator housing pr
otects blower and quietly removes
smoke and odor
§Quietest hood and ventilator combination in the industry §Multi-speed ventilator control knob allows pr
ecise adjustment to
desired fan speed
§Maintenance-free ventilators never need to be cleaned with the commer
cial-type hood filters doing the dirty work
§Cook with peace of mind as the built-in heat sensor activates the ventilator to full power if cooking temperatures r
each uncomfortable
levels
§Ventilators must be pur
chased separately and are available in
internal, external, and in-line models (See Ventilation guide for compatibility) Must use Viking ventilator kits with Viking hoods

BRIGHT LED LIGHTING
§Dimmable lighting controls pr ovide custom illumination for enhanced surface cooking visibility
§Long-life LED light bulbs are ener
gy efficient and easily replaceable
§Heat lamps conveniently keep food warm until r
eady to serve (not
available on Island Hoods)

EASY CLEANUP
§Commercial-type baffle filters efficiently remove heat and grease vapors fr
om the air
§Stainless steel dishwasher-safe filters ar
e easily removed for quick
cleaning
§Low-profile filter system r
educes interior hood space, leaving less
surface to clean
§Removable trough collects liquefied gr
ease for convenient disposal

WARRANTY
§2-year full – complete product
§90-day full – cosmetic parts
such as glass, painted items
and decorative items
§5-year limited – ventilator
motors

INTERIOR, EXTERIOR, OR IN-LINE VENTILATORS
§Wall and island hoods
§Interior-power ventilator kits – 300 CFM (VINV300), 600 CFM (VINV600), or 1,200 CFM (VINV1200)
§Exterior-power ventilator kits – 900 CFM (DEV900), 1,200 CFM (DEV1200), or 1,500 CFM (DEV1500)
§In-line-power ventilator kits – 900 CFM (DIL900) or 1,200 CFM (DIL1200)
§See specification chart for compatibility
§One ventilator, one duct run for any size hood/ventilator

MODEL NUMBERS
§VWH53048 – 30”W . Wall Hood
§VWH53648 – 36”W. W
all Hood
§VWH54248 – 42”W. W
all Hood
§VWH54848 – 48”W. W
all Hood
§VWH56048 – 60”W. W
all Hood

ACCESSORIES
§DCW30SS – W all Hood Duct
Cover for 30” Hood
§DCW36SS – W
all Hood Duct
Cover for 36” Hood
§DCW42SS – W
all Hood Duct
Cover for 42” Hood
§DCW48SS – W
all Hood Duct
Cover for 48” Hood
§DCW60SS – W
all Hood Duct
Cover for 60” Hood
§WGP30SS – Wall Hood
W
arming Shelf Panels for 30”
Hood
§WGP36SS – Wall Hood
W
arming Shelf Panels for 36”
Hood
§WGP48SS – Wall Hood
W
arming Shelf Panels for 48”
Hood
§BKS30SS – Wall Hood
Backsplash for 30” Hood
§BKS36SS – Wall Hood
Backsplash for 36” Hood
§BKS48SS – Wall Hood
Backsplash for 48” Hood
§BKS60SS – Wall Hood
Backsplash for 60” Hood
5 SERIES HOODS – 18” HIGH
Viking 5 Series – VWH

COLOR FINISHES
§Stainless Steel (SS), Black (BK),
and White (WH)

§Available in 14 exclusive color
finishes Alluvial Blue (AB), Ar
ctic
Gray (AG), Black Forest Green
(BF), Bywater Blue (BW), Cast
Black (CS), Cypress Green (CY),
Damascus Gray (DG), Frost White,
(FW) Kalamata Red (KA), Pacific
Gray (PG), Reduction Red (RE),
Slate Blue (SB), San Marzano Red
(SM), Vanilla Cream (VC)
(VIKINGl _______ _
■
18” WALL HOODS
DESCRIPTION VWH53048 VWH53648 VWH54248 VWH54848 VWH56048 Overall/Duct Cover Width 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) 41-7/8” (106.4 cm) 47-7/8” (121.6 cm) 59-7/8” (152.1 cm) Overall Depth 24” (61.0 cm)
Overall Height 18” (45.7 cm)
Duct Cover Depth 12” (30.5 cm)
Duct Cover Height 12” (30.5 cm)
Heat Lamps 1 1 1 1 1
Interior Ventilator Kits VINV300/600/1200 VINV300/600/1200 VINV600/1200 VINV1200* VINV1200* Exterior Ventilator Kits DEV900/1200* DEV900/1200* DEV900/1200* DEV1200*/1500** DEV1200*/1500** In-Line Ventilator Kits DIL1200 DIL1200 DIL1200 DIL1200 DIL1200 Interior Duct Size 7”/10” (17.8/25.4 cm) 10” (25.4 cm)
Exterior Duct Size 10” (24.5 cm)
Interior—Maximum Amps 4.2/5.2/8.2 5.2/8.2 10.8
Exterior—Maximum Amps 8.0/5.3 7.8/8.5
In-Line—Maximum Amps 5.3/7.2 9.6 10.0
Please do not prepare installation from brochure data only. See installation instructions for important clearance/installation information. ** Disregard when using recirculating kits. 460 CFM blower is shipped with hood. Maximum duct run is 50 ft. 24”
(61.0 cm)
A
18”(45.7 cm)
12”(30.5 cm)
6”(15.2 cm)
30”min.
(76.2 cm)
to36”max.
(91.4 cm)
66”min.
(167.6 cm)
to72”max.
(182.9 cm)
36”
(91.4 cm)
A (Hood width)
30”W. 29-7/8“ (76.2 cm)
36”W. 35-7/8” (91.1 cm)
42”W. 41-7/8” (106.4 cm)
48“W. 47-7/8” (121.6 cm)
60”W. 59-7/8” (152.1 cm)
5 SERIES HOODS – 18” HIGH
Viking 5 Series – VWH
F60354A 0121
For detailed product information, model numbers, or to request a quote call 1-888-845-4641 or visit vikingrange.com © 2020 Viking Range, LLC All rights reserved. Specifications subject to change without notice.

VIKING RANGE, LLC 111 FRONT STREET GREENWOOD, MISSISSIPPI 38930 USA (VIKINGl
(VnaNGt
r
J.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Listed by
Underwriters
Laboratories
Specification Revised 6/17
For answers to your Monogram, GE Café ™ Series, GE Profile ™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center ® Service, 800.626.2000.

PES7227DL/SL/EL/BL
GE Profile™ Series 2.2 Cu. Ft. Countertop Sensor Microwave Oven This unit designed to be placed on countertop.

EXTERIOR DIMENSIONS* (IN INCHES)
W x H x D 24 1/8" x 14" x 19 3/4"
*Height includes feet. Depth does not include handle.
2 5
0 8
Express Cook
1 4
7 P ower
Level
Set
Clock
3 6
9 Reheat
Defr ost
Weight/Time
Healthy
Menu
Ti mer
Cook
Time
Add
30 Sec
Clock
Display
Potato
Beverage
Popcorn
Vegetable
Melt/
Soften
Convenience Cooking
Start
Pause
Cancel Sound

MELT / SOFTEN

STEAM DEFROST TIMER
LOCK
WEIGHT

SENSOR AUTO COOK TIME MUTE
12:30
PES7227DLWW_DLBB/ELES_SLSS_BLTS
Specification Revised 6/17
For answers to your Monogram, GE Café ™ Series, GE Profile ™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center ® Service, 800.626.2000.

PES7227DL/SL/EL/BL
GE Profile™ Series 2.2 Cu. Ft. Countertop Sensor Microwave Oven 2 5
0 8
Express Cook
1 4
7 P ower
Level
Set
Clock
3 6
9 Reheat
Defr ost
Weight/Time
Healthy
Menu
Ti mer
Cook
Time
Add
30 Sec
Clock
Display
Potato
Beverage
Popcorn
Vegetable
Melt/
Soften
Convenience Cooking
Start
Pause
Cancel Sound

MELT / SOFTEN

STEAM DEFROST TIMER
LOCK
WEIGHT

SENSOR AUTO COOK TIME MUTE
12:30
PES7227DLWW_DLBB/ELES_SLSS_BLTS

FEATURES AND BENEFITS

2.2 cu. ft. capacity - 1100 watts (IEC-705 test procedure) Sensor cooking controls - Automatically adjusts time and power Weight and time defrost - Simply enter the weight of the food, and the oven automatically sets the optimal defrosting time and power level or set your desired time for defrosting Extra-large 16.5" turntable - Rotates food throughout the cycle and accommodates large cookware
Instant on controls - One-touch instant operation
Control lockout - Helps prevent accidental activation
Add 30 seconds - Add 30 seconds of microwave cooking time Kitchen timer - Minute timer helps keep you on track
Model PES7227DLWW – White
Model PES7227DLBB – Black
Model PES7227SLSS - Stainless steel
Model PES7227ELES – Slate
Model PES7227BLTS - Black stainless steel
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /0 /1 □ /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 □ /1 /19 □ /11 /16 /20 □ /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /27 /28 □ /29 /27 /16 /12 /21 /27 /23 □ /30 /31 /11 /23 /12 /32 /33 /16 □ /26 /24 /23 /23 □ /26 /31 /34 □ /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 □ /36 /11 /12 /14 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /31 /34 /4 □ /19 /19 □ /18 /30 /17 /32 /10 /35 /26 /9 /3 /37 /19/38 /14
/12 /12 /28 /25 /7 /2 /2 /36 /36 /36 /20 /14 /27 /39 /15 /18 /15 /28 /27 /12 /20 /13 /27 /39 /2 /28 /2 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 /32 /1 /19 /32 /11 /16 /32 /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /27 /28 /32 /29 /27 /16 /12 /21 /27 /23 /32 /30 /31 /11 /23 /12 /32 /33 /16 /32 /26 /24 /23 /23 /32 /26 /31 /34 /32 /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 /32 /36 /11 /12 /14 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /31 /34 /32 /19 /19 /32 /18 /30/38 /0 /2 /0 /40 /41 /42 /43 /44 /45 /42 /44 /43 □ /47 /48 /49 /50 /50 /51 /52 /52 /48 /49 /53 /54 /55 /44 /56 □ /47 /57 /58 /59 /53 /60 /52 /61 /57 /62 /63 /64 /62 /65 □ /65 /54 /55 /44 □ /47 /66 /66 /48 /52 /61 /51 /67 /48 /50 /60 /68 /68 /63 /43 /54 /45 /44 □ /63 /57 /64 □ /47 /49 /52 /52 /67 /49 /48 /66 /48 /60 /52 /63 /43 /54 /45 /44 □ /63 /69 □ /63 /57 /64 □ /47 /49 /52 /52 /67 /49 /48 /66 /48 /60 /52 /63 /70 /71 /44 □ /43 /54 □ /72 /73 /74 /43
/75 /54 /76 /44 /77 /78 /78 /56 /73 /70 /42 /79 /44 /74 /58 /73 /74 /80 /81 /70 /74 /80 /44 /45 /74 /82 /83 /73 /56 /43 /84 /41 /42 □ /58 /73 /74 /80 /81 /70 /74 /80 /44 /45 /74/85 /85 /85 /86 /87 /88
/89 /90 /78 /56 /54 /45 /44 □ /91 /44 /70 /43 /83 /45 /44 /74/92 /93 /44 /44 /55 □ /75 /44 /56 /78 /94/92 /65 /70 /56 /56 □ /49 /84 /66 /52 /52 /84 /67 /50 /67 /84 /67 /52 /52 /52 /54 /45 /59 /44 /90 /43 □ /48 /48 /51 /67 /67 /95 /54 /83 /96 /45 /44 □ /74 /80 /54 /78 /78 /73 /42 /97 /98
/99 □ /101 /102 /103 /104 /105 □ /106 /107 /108 /109 /108 /110 □ /111 /112 /98 /113 □ /83 /42 /43 /73 /56 □ /49 /52 □ /78 /76 /75 /44 /56 /56 /54 /114
/101
/104 /107 /115/65 /70 /45 /43/63 /44 /70 /45 /79 /80
/116
/95
/54 /83 /96 /45 /44 □ /74 /80 /54 /78 /78 /73 /42 /97 □ /98 /99 □ /101 /102 /103 /104 /105 □ /106 /107 /108 /109 /108 /110 □ /111 /112 /98 /113 □ /83 /42 /43 /73 /56 □ /49 /52 □ /78 /76 /112 /107 /104 /117 /118 /119 /120 □ /111 /121 /122 /107 /121 /123 /122 /124/63 /78 /44 /79 /73 /125 /73 /79 /70 /43 /73 /54 /42 /74 /126 /83 /44 /74 /43 /73 /54 /42 /74 □ /127 □ /77 /42 /74 /81 /44 /45 /74 /65 /83 /74 /43 /54 /76 /44 /45 □ /128 /44 /71 /73 /44 /81 /74 /50 /61 □ /73 /42 /129 □ /62 /45 /73 /42 /43 /63 /80 /73 /44 /56 /55 □ /63 /43 /70 /73 /42 /56 /44 /74 /74 □ /63 /43 /44 /44 /56 □ /59 /54 /78 □ /65 /54 /42 /43 /45 /54 /56 □ /82 /83 /73 /56 /43 /84 /41 /42 □ /59 /70 /56 /56 □ /59 /83 /130 □ /58 /73 /74 /80 /81 /70 /74 /131 /130 /132 □ /133 /49 /49 /52 /48 /134
/135/87 /87 /108 /136/137 /137/138/49 /49 /51 /51/129/52 /52 /63 /70 /71 /44 □ /138 /48 /52 /129 /52 /52 □ /133 /48 /139/134 /140 /141 /142
KitchenAid *****
You're shoppinq El Cajon (r676) ,.,
0 I
-
► I
J:t. u
t\J
.0 ,,
CII
a.i
LI.
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /0 /1 □ /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 □ /1 /19 □ /11 /16 /20 □ /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /27 /28 □ /29 /27 /16 /12 /21 /27 /23 □ /30 /31 /11 /23 /12 /32 /33 /16 □ /26 /24 /23 /23 □ /26 /31 /34 □ /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 □ /36 /11 /12 /14 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /31 /34 /4 □ /19 /19 □ /18 /30 /17 /32 /10 /35 /26 /9 /3 /37 /19/38 /14
/12 /12 /28 /25 /7 /2 /2 /36 /36 /36 /20 /14 /27 /39 /15 /18 /15 /28 /27 /12 /20 /13 /27 /39 /2 /28 /2 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 /32 /1 /19 /32 /11 /16 /32 /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /27 /28 /32 /29 /27 /16 /12 /21 /27 /23 /32 /30 /31 /11 /23 /12 /32 /33 /16 /32 /26 /24 /23 /23 /32 /26 /31 /34 /32 /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 /32 /36 /11 /12 /14 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /31 /34 /32 /19 /19 /32 /18 /30/38 /1 /2 /0 /40 /41 /42 □ /44 /45 /46 □ /47 /48 /44 /45 /49 /50 /51 /44 /52 /53 /54 □ /50 /49 /55 /44 /45 /53 /52 /56 /56 □ /50 /49 /52 /52 /53 □ /57 /58 /59 □ /60 /58 /45 /49 /48 /58 /53 □ /61 /62 /44 /53 /49 /63 /64 /45 □ /57 /55 /53 /53 □ /57 /62 /65 □ /66 /44 /56 /51 /67 /55 /56 /51 /52 /48 □ /67 /44 /49 /51 □ /50 /49 /55 /44 /45 /53 /52 /56 /56 /50
/49 /52 /52 /53 □ /57 /62 /65 /68 □ /42 /42 □ /54 /61 /69 /65 /70 □ /71 /72 /73 /74 /75 /76 /77 /78 /72 /79
/80 /81 /81 /82 /83 /84/85/48 /44 /49 /52 □ /55 □ /86 /52 /87 /44 /52 /67 /88 /62 /52 /56 /49 /44 /58 /45 /56 □ /89 □ /69 /45 /56 /67 /52 /48 /56 □ /80 /90 /91 /84 /92/93 /93 /94 /95/96 /96/97/81 /81 /98 /98/46/82 /82
/50 /55 /87 /52 □ /97 /83 /82 /46 /82 /82 □ /80 /83 /99/84 /100
/15 /12 □ /31 /28 □ /12 /27 □ /0 □ /101 /15 /34 /24 /12 /15 □ /102 /27 /21 □ /40 /1 /37 /1 /37 /85/51 /44 /53 /52 □ /56 /62 /59 /59 /53 /44 /52 /56 □ /53 /55 /56 /49 /60 /58 /53 /58 /48 /103 /104 /44 /45 /44 /56 /51 /105 □ /107 /73 /108 /72 /77 /109 /76 /110 /110 □ /107 /73 /76 /76 /109 □ /111 /72 /73 /75 □ /112 /113 /72 /77 /73 /107 /75 /72 /76 /109 /79 /114□ /115 /72 /77 /72 /110 /75 /116 /55 /45 /54 /53 /52 □ /57 /70 /59 /52 /105 □ /117 /108 /113 □ /118 /108 /77 /79 /109 /76 /117 /108 /113 □ /118 /108 /77 /79 /109 /76/47 /58 /119 /120 /52 /49 □ /116 /55 /45 /54 /53 /52 /116 /58 /67 □ /49 /58 □ /121 /52 /49 □ /64 /49
/78 /79 /79 □ /73 /122 □ /123 /108 /113 /73
/118 /122 /124/76 □ /125 /76 /109 /72 /126 /76 /113 /127 /60
/51 /52 /119 /120 □ /54 /52 /53 /44 /87 /52 /48 /70 □ /54 /55 /49 /52 /65 /52
/53 /58 /67
/115 /128 /129 /129
/107 /73 /122 /113 /76 □ /112 /72 /74 /130 /131 /132
/133
/58 /49 □ /55 /87 /55 /44 /53 /55 /65 /53 /52 □ /134 /58 /48 □ /49 /51 /44 /56 /44 /49 /52 /135
/57 /52 /53 /53 □ /62 /56 □/70 /58/62 /48 □ /136 /64 /47 □ /60 /58 /54 /52/137 /132 /79 /108 /73 /76 /138 /139 /140 /141 /142 /143 /144 /145 /140 □ /147/148 /142 □ /149 /150 /144 /151 /144 /152 □ /153 /148 /150 /140 □ /154 /155 /140 /142 □ /149 /150 /144 /151 /144 /152 /112 /113 /122 /79 /131 /74 /73 □ /156 /126 /76 /113 /126 /72 /76 /111/50 /59 /52 /119 /44 /134 /44 /119 /55 /49 /44 /58 /45 /56 /88 /62 /52 /56 /49 /44 /58 /45 /56 □ /89 □ /69 /45 /56 /67 /52 /48 /56 /60 /62 /56 /49 /58 /135 /52 /48 □ /86 /52 /87 /44 /52 /67 /56 /41 /42 □ /44 /45 /46 □ /47 /48 /44 /45 /49 /50 /51 /44 /52 /53 /54 □ /50 /49 /55 /44 /45 /53 /52 /56 /56 □ /50 /49 /52 /52 /53 □ /57 /58 /59 □ /60 /58 /45 /49 /48 /58 /53 □ /61 /62 /44 /53 /49 /63 /64 /45 □ /57 /55 /53 /53 □ /57 /62 /65 □ /66 /44 /56 /51 /67 /55 /56 /157 /65 /70 □ /80 /81 /81 /82 /83 /84
/92/93 /93 /94 /95/96 /96/97/81 /81 /98 /98/46/82 /82
/50 /55 /87 /52 □ /97 /83 /82 /46 /82 /82 □ /80 /83 /99/84 /158 /159 /160
KitchenAid *****
■ m
....._I _____,JI _I _______,I
Check Earliest Delivery Date
I 11 .,__ ___ .J
J:t. u
t\J
.0 ,,
CII
a.i
LI.
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /0 /1 □ /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 □ /1 /19 □ /11 /16 /20 □ /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /27 /28 □ /29 /27 /16 /12 /21 /27 /23 □ /30 /31 /11 /23 /12 /32 /33 /16 □ /26 /24 /23 /23 □ /26 /31 /34 □ /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 □ /36 /11 /12 /14 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /31 /34 /4 □ /19 /19 □ /18 /30 /17 /32 /10 /35 /26 /9 /3 /37 /19/38 /14
/12 /12 /28 /25 /7 /2 /2 /36 /36 /36 /20 /14 /27 /39 /15 /18 /15 /28 /27 /12 /20 /13 /27 /39 /2 /28 /2 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 /32 /1 /19 /32 /11 /16 /32 /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /27 /28 /32 /29 /27 /16 /12 /21 /27 /23 /32 /30 /31 /11 /23 /12 /32 /33 /16 /32 /26 /24 /23 /23 /32 /26 /31 /34 /32 /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 /32 /36 /11 /12 /14 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /31 /34 /32 /19 /19 /32 /18 /30/38 /40 /2 /0 /40 /41 /42 /43 /44 /45 /46 /45 /44 /47 /48 /45 /49 /50 /51 /52 /53 /53 /54 □ /56 /54 □ /57 /58 /59 /60 □ /59 /60 /53 □ /59 /61 /61 /62 /63 □ /64 /61 /56 □ /56 /63 /53 □ /65 /66 /61 /67 □ /54 /66 /53 /54 □ /59 /61 □ /59 /68 /69 /62 /53 □ /57 /58 /59 /60 □ /59 /60 /58 /63 /70 /58 /63 /60 /57 /68 /63 /60 /53 /66 /71 /63 □ /59 /60 /66 /53 /53 □ /66 /68 /72 /73 /63 □ /61 /65 □ /74 /53 /66 /63 /68 /59 /58 /62 /53 □ /62 /61 /68 /70 /58 /75 /76 □ /54 /61 /63 /63 /58 /69 /58 /62 /58 /59 /58 /53 /63 □ /68 /75 /70 /72 /61 /67 /54 /62 /53 /59 /53 □ /57 /68 /63 /60 □ /72 /61 /74 /53 /66 /68 /76 /53 /77 □ /78 /60 /53 □ /79 /66 /53 /53 /79 /62 /53 /80 □ /78 /60 /58 /66 /70 □ /81 /68 /72 /73 □ /65 /58 /59 /63 □ /76 /62 /68 /63 /63 /53 /63 /82 /67 /56 /76 /63 /82 □ /69 /61 /57 /62 /63 /82 □ /63 /58 /62 /74 /53 /66 /57 /68 /66 /53 □ /68 /75 /70 □ /72 /61 /61 /73 /58 /75 /76 □ /59 /61 /61 /62 /63 /82 □ /65 /66 /53 /53 /58 /75 /76 □ /56 /54 □ /66 /61 /61 /67 /69 /53 /62 /61 /57 □ /65 /61 /66 □ /54 /61 /59 /63 /82 □ /54 /62 /68 /59 /53 /63 □ /68 /75 /70 □ /67 /58 /80 /58 /75 /76 □ /69 /61 /57 /62 /63 /77 □ /83 /70 /74 /68 /75 /72 /53 /70 □ /84 /62 /53 /68 /75 □ /85 /68 /59 /53 /66 /85 /68 /63 /60 □ /86 /64 /63 /59 /53 /67 □ /72 /58 /66 /72 /56 /62 /68 /59 /53 /63 □ /72 /62 /53 /68 /75 □ /57 /68 /59 /53 /66 □ /59 /61 □ /70 /58 /63 /60 /53 /63 □ /58 /75 □ /68 /62 /62 □ /59 /60 /66 /53 /53 □ /66 /68 /72 /73 /63 /82 /68 /75 /70 □ /59 /60 /53 □ /79 /68 /75 /87 /88 /75 /68 /69 /62 /53 /70 □ /89 /66 /61 /90 /66 /64 □ /86 /64 /63 /59 /53 /67 □ /54 /66 /61 /74 /58 /70 /53 /63 □ /59 /60 /61 /66 /61 /56 /76 /60 □ /70 /66 /64 /58 /75 /76 /82 /63 /61 □ /70 /58 /63 /60 /53 /63 □ /72 /61 /67 /53 □ /61 /56 /59 □ /66 /53 /68 /70 /64 □ /65 /61 /66 □ /67 /61 /66 /53 □ /53 /75 /91 /61 /64 /58 /75 /76 /77 /92 /61 /56 □ /57 /58 /62 /62 □ /75 /53 /53 /70 □ /83 /70 /61 /69 /53 /93 □ /83 /72 /66 /61 /69 /68 /59 /93 □ /81 /53 /68 /70 /53 /66 □ /59 /61 □ /74 /58 /53 /57 □ /89 /90 /79 /70 /61 /72 /56 /67 /53 /75 /59 /63 /77 □/90 /61 /57 /75 /62 /61 /68 /70□ /68 □ /65 /66 /53 /53 □ /72 /61 /54 /64 □ /65 /66 /61 /67 □ /59 /60 /53 □ /83 /70 /61 /69 /53 □ /85 /53 /69 /63 /58
/59 /53 /77
/95 /96 /97 □ /99/100 /101 /102 /103 /104 /100 /105
/41 /48 /47 /45 /50 /106 /43 /51 /51 □ /41 /48 /43 /43 /106 □ /108 /109 /110 /86 /53 /53 □ /86 /58 /67 /58 /62 /68 /66 □ /111 /59 /53 /67 /63 /112 /113 /96 /114 /115 □ /116 /100 /101 /104 /114 /117 □ /116 /100 /114 /117 /102 □ /118 /119 /102 /120 /104 /97 /102 /105 /121 /122 /123 /109 /45 /43 /48 /43 /51 /48
/86 /53 /53 □ /86 /58 /67 /58 /62 /68 /66 □ /111 /59 /53 /67 /63 /119 /104 /121 /124 /125 /100 /121 /124 /102 /103 □ /112 /104 /126 /102 /127 /128 □ /129 /50 /130
/86 /53 /53 □ /86 /58 /67 /58 /62 /68 /66 □ /111 /59 /53 /67 /63 /131 /102 /104 /117 /124 /101 □ /132 □ /99/100 /133 □ /118 /104 /114 /122 /134 /128 /130 /135 /134 □ /45 /50
/86 /53 /53 □ /86 /58 /67 /58 /62 /68 /66 □ /111 /59 /53 /67 /63 /136 /102 /100 /101 /96 /103 /102 /121
/134 /137 /138 □ /139 /47 /44 /140
/86 /53 /53 □ /86 /58 /67 /58 /62 /68 /66 □ /111 /59 /53 /67 /63 /141 /103 /113 /115 /96 /120 /101 □ /142 /143 /102 /103 /143 /104 /102 /125/86 /54 /53 /72 /58 /65 /58 /72 /68 /59 /58 /61 /75 /63 /144 /56 /53 /63 /59 /58 /61 /75 /63 □ /145 □ /83 /75 /63 /57 /53 /66 /63 /84 /56 /63 /59 /61 /67 /53 /66 □ /81 /53 /74 /58 /53 /57 /63 /146 /147 □ /58 /75 /77 □ /89 /66 /58 /75 /59 /86 /60 /58 /53 /62 /70 □ /86 /59 /68 /58 /75 /62 /53 /63 /63 □ /86 /59 /53 /53 /62 □ /78 /61 /54 □ /84 /61 /75 /59 /66 /61 /62 □ /148 /56 /58 /62 /59 /87 /111 /75 □ /78 /68 /62 /62 □ /78 /56 /69 □ /90 /58 /63 /60 /57 /68 /63 /149 /69 /64 □ /150 /151 /151 /152 /153 /154
/155/156 /156 /157 /158/159 /159/160/151 /151 /161 /161/77/152 /152 /86 /68 /74 /53 □ /160 /153 /152 /77 /152 /152 □ /150 /153 /162/154 /163 /164 /165
KitchenAid *****
J:t. u
t\J
.0 ,,
CII
a.i
LI.
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /0 /1 □ /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 □ /1 /19 □ /11 /16 /20 □ /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /27 /28 □ /29 /27 /16 /12 /21 /27 /23 □ /30 /31 /11 /23 /12 /32 /33 /16 □ /26 /24 /23 /23 □ /26 /31 /34 □ /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 □ /36 /11 /12 /14 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /31 /34 /4 □ /19 /19 □ /18 /30 /17 /32 /10 /35 /26 /9 /3 /37 /19/38 /14
/12 /12 /28 /25 /7 /2 /2 /36 /36 /36 /20 /14 /27 /39 /15 /18 /15 /28 /27 /12 /20 /13 /27 /39 /2 /28 /2 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 /32 /1 /19 /32 /11 /16 /32 /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /27 /28 /32 /29 /27 /16 /12 /21 /27 /23 /32 /30 /31 /11 /23 /12 /32 /33 /16 /32 /26 /24 /23 /23 /32 /26 /31 /34 /32 /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 /32 /36 /11 /12 /14 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /31 /34 /32 /19 /19 /32 /18/38 /0 /37 /2 /0 /40 /41 /42 /43 /44 /45 □ /47 □ /41 /48 /48 /49 □ /50 /45 /51 /44 □ /52 /53 /54 /44 /45 /48 /51 /44 □ /55 /56 /57 /58 /59 /42 /60 □ /52 /54 /57 /61 /60 /62 /63 /64 /65 □ /67 /68
/69 /70 /70 □ /69 /72 /73 /72 /74 /75 /76 □ /77 /78 /70 /73 /79 /80 /48 /57 /44 /49 /48 /59 □ /81 /48 /82 /56 /44 /54 /48 /57 /83 /84 /85 □ /86 /84 /68 /87 /88 /84 /89
/69 /70 /70 □ /69 /72 /73 /72 /74 /75 /76 □ /77 /78 /70 /73 /79 /55 /56 /57 /58 /59 /42 □ /90 /91 /43 /42
/92 /93 /88 □ /94 /93 /68 /95 /89 /96
/69 /70 /70 □ /69 /72 /73 /72 /74 /75 /76 □ /77 /78 /70 /73 /79 /97 /98 /78 /99 /100 /98 /78 □ /101 /70 /102 /78 /103 □ /104 /72 /105 /106 /107/108 /109 □ /72 /105 /97 /98 /78 /99 /100 /98 /78 □ /110 /70 /72 /111 /103 /78 □ /104 /72 /105 /106 /107/112 /113 □ /72 /105 /97 /98 /78 /99 /100 /98 /78 □ /114/72 /115 /78 /103 □ /104 /72 /105 /106 /107/108 /113 □ /72 /105 /101 /70 /102 /78 /103 □ /99 □ /101 /116 /116 /76 □ /69 /103 /98 /78 □ /104 /117 /72 /78 /103 □ /110 /75 /105 /115 /74 /70 /107 □ /104 /72 /105 /106 /107/108 /118 /106 /119 /120 □ /72 /105 /101 /70 /102 /78 /103 □ /99 □ /101 /116 /116 /76 □ /69 /103 /98 /78 □ /104 /117 /72 /78 /103 /116 /98 /78 □ /110 /75 /105 /115 /74 /70 /107 □ /104 /72 /105 /106 /107/108 /113 /106 /120 □ /72 /105 /101 /70 /102 /78 /103 □ /114/72 /78 /103 □ /101 /116 /116 /76 □ /100 /102 /70 /105 □ /121 /122 □ /101 /70 /111 /76 /70 /70 /79 □ /104 /77 /105 /107/120 /123 □ /72 /105 /101 /72 /79 /103 /117 /75 /79 /103 /70 /76 □ /69 /72 /124 /70/108 /113 □ /77 /105 /106 /110 /70 /72 /111 /103 /78 □ /99 □ /125 /75 /126 /72 /73 /98 /73 □ /104 /72 /105 /107/112 /113 /106 /118 /112 □ /72 /105 /110 /70 /72 /111 /103 /78 □ /99 □ /125 /72 /105 /72 /73 /98 /73 □ /104 /72 /105 /107/112 /112 /106 /118 /112 □ /72 /105 /127 /76 /116 /115 /98 /128 /78 □ /101 /70 /102 /78 /103 □ /104 /72 /105 /106 /107/108 /118 /106 /119 /120 □ /72 /105 /127 /76 /116 /115 /98 /128 /78 □ /110 /70 /72 /111 /103 /78 □ /104 /72 /105 /106 /107/112 /112 /106 /118 /112 □ /72 /105 /127 /76 /116 /115 /98 /128 /78 □ /114/72 /115 /78 /103 □ /104 /72 /105 /106 /107/108 /112 /106 /109 /109 □ /72 /105 /129 /73 /102 /70 /76 /75 /111 /70 /104 /75 /73 /102 /79 /107/123 /120 /129 /130 /49 /48 /58 /51 /82 /44 □ /131 /132 /42 /49 /132 /54 /42 /53/69 /102 /70 /128 /72 /133 /72 /128 /75 /78 /72 /116 /105 /79 /134 /98 /70 /79 /78 /72 /116 /105 /79 □ /135 □ /129 /105 /79 /117 /70 /76 /79 /97 /98 /79 /78 /116 /73 /70 /76 □ /136 /70 /137 /72 /70 /117 /79 /108 /113 □ /72 /105 /106 □ /127 /76 /72 /105 /78 /69 /103 /72 /70 /74 /115 □ /69 /78 /75 /72 /105 /74 /70 /79 /79 □ /69 /78 /70 /70 /74 □ /138 /116 /102 □ /97 /116 /105 /78 /76 /116 /74 □ /139 /98 /72 /74 /78 /99 /77 /105 □ /138 /75 /74 /74 □ /138 /98 /140 □ /101 /72 /79 /103 /117 /75 /79 /141 /140 /142 □ /104 /123 /123 /122 /112 /107
/143/144 /144 /145 /146/147 /147/148/123 /123 /121 /121/106/122 /122 /69 /75 /137 /70 □ /148 /112 /122 /106 /122 /122 □ /104 /112 /149/107 /150 /151 /152
KitchenAid *****
Dimensions
Details
/ln,n.o.r-'::tina /'::tirnnc\
J:t. u
t\J
.0 ,,
CII
a.i
LI.
/0 /1 /2 /3 /2 /1 /0 /4 □ /6 /7 /0 /1 □ /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 □ /1 /19 □ /11 /16 /20 □ /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /27 /28 □ /29 /27 /16 /12 /21 /27 /23 □ /30 /31 /11 /23 /12 /32 /33 /16 □ /26 /24 /23 /23 □ /26 /31 /34 □ /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 □ /36 /11 /12 /14 □ /22 /12 /24 /11 /16 /23 /15 /25 /25 □ /22 /12 /15 /15 /23 □ /26 /31 /34 /4 □ /19 /19 □ /18 /30 /17 /32 /10 /35 /26 /9 /3 /37 /19/38 /14
/12 /12 /28 /25 /7 /2 /2 /36 /36 /36 /20 /14 /27 /39 /15 /18 /15 /28 /27 /12 /20 /13 /27 /39 /2 /28 /2 /10 /11 /12 /13 /14 /15 /16 /17 /11 /18 /32 /1 /19 /32 /11 /16 /32 /8 /21 /11 /16 /12 /22 /14 /11 /15 /23 /18 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /27 /28 /32 /29 /27 /16 /12 /21 /27 /23 /32 /30 /31 /11 /23 /12 /32 /33 /16 /32 /26 /24 /23 /23 /32 /26 /31 /34 /32 /35 /11 /25 /14 /36 /24 /25 /14 /15 /21 /32 /36 /11 /12 /14 /32 /22 /12 /24 /11 /16 /23 /15 /25 /25 /32 /22 /12 /15 /15 /23 /32 /26 /31 /34 /32 /19 /19 /32 /18/38 /0 /0 /2 /0 /40 /41 /42 /43 /44 /45 /46 /47 /44 □ /49 /46 /42 /43 /50 /51 /52 /53 □ /41 /41 /43 /43 /54 /55 /46 /56 /57 /44 □ /58 /46 /59 /44 /47 /60 /45 /61/62 /55 /50 /63 /64 /46 /50 /63 /44 /45 /41 /43 /43 /54 /55 /46 /56 /57 /44 □ /65 /61 /43 /44 /62 /55 /50 /63 /64 /46 /50 /63 /44 /45 /58 /60 /54 /60 /45 /66 /67 /55 /56 /55 /50 /63 /68 /59 /46 /55 /56 /54 /44 /50 /50 □ /68 /59 /44 /44 /54 □ /64 /55 /59 /63 □ /69 /45 /55 /56 /59 /68 /63 /55 /44 /54 /70 /71□ /67 /55 /56 /55 /50 /63 /58 /60 /54 /60 /45 /66 /67 /55 /56 /55 /50 /63 □ /67 /46 /42 /55 /54 /61/68 /59 /46 /55 /56 /54 /44 /50 /50 □ /68 /59 /44 /44 /54 /58 /60 /56 /59 /45 /60 /54 □ /72 /60 /57 /46 /59 /55 /60 /56 /65 /60 /43 □ /58 /60 /56 /59 /45 /60 /54 /58 /60 /56 /59 /45 /60 /54 □ /65 /61 /43 /44 /65 /60 /73 /57 /63 /58 /73 /50 /59 /60 /42 □ /62 /60 /60 /45 □ /69 /46 /56 /44 /54 □ /74 /44 /46 /70 /61/75 /60 /62 /44 /57 /55 /76 /44 /54 □ /49 /68 /60 /73 /56 /70 /51 □ /74 /46 /59 /55 /56 /47/77 /77 □ /70 /78 /41 /62 /55 /50 /63 /64 /46 /50 /63 /44 /45 □ /67 /44 /46 /59 /73 /45 /44 /50/79 /45 /70 □ /74 /46 /57 /80 /81 /41 /73 /59 /60 /42 /46 /59 /55 /57 □ /65 /44 /42 /43 /44 /45 /46 /59 /73 /45 /44 □ /58 /60 /56 /59 /45 /60 /54 /81 /58 /61 /57 /54 /44 □ /68 /59 /46 /59 /73 /50 /72 /55 /47 /63 /59 /50 /81 /67 /55 /54 /59 /44 /45 /44 /70 □ /82 /46 /59 /44 /45 /81 /67 /55 /56 /47 /44 /45 /43 /45 /55 /56 /59 □ /74 /44 /50 /55 /50 /59 /46 /56 /59 /81 /83 /55 /70 /70 /44 /56 /58 /60 /56 /59 /45 /60 /54 /50 /81 /65 /46 /54 /54 □ /65 /73 /76 /62 /55 /50 /63 /64 /46 /50 /63 /44 /45 □ /74 /46 /57 /80 □ /58 /60 /56 /84 /55 /47 /73 /45 /46 /59 /55 /60 /56/52 /50 /59 □ /74 /46 /57 /80 /85 □ /41 /70 /86 /73 /50 /59 /46 /76 /54 /44 /81 /52 /50 /59 □ /74 /46 /57 /80 /85 □ /67 /60 /54 /70 □ /62 /60 /64 /56 □ /65 /55 /56 /44 /50 /81 /52 /50 /59 /74 /46 /57 /80 /85 □ /74 /44 /42 /60 /87 /46 /76 /54 /44 /81 /88 /56 /70 □ /74 /46 /57 /80 /85 □ /67 /60 /54 /70 □ /62 /60 /64 /56 □ /65 /55 /56 /44 /50 /81 /88 /56 /70 /74 /46 /57 /80 /85 □ /68 /55 /54 /87 /44 /45 /64 /46 /45 /44 □ /78 /46 /50 /80 /44 /59 /81 /79 /45 /70 □ /74 /46 /57 /80 /85 □ /74 /44 /42 /60 /87 /46 /76 /54 /44 /62 /55 /50 /63 /64 /46 /50 /63 /44 /45 □ /82 /46 /50 /63 □ /58 /61 /57 /54 /44 /50/62 /44 /54 /46 /61 □ /68 /59 /46 /45 /59 /81 /83 /55 /47 /63 □ /65 /44 /42 /43 /44 /45 /46 /59 /73 /45 /44 □ /82 /46 /50 /63 /81 /89 /73 /55 /57 /80 □ /82 /46 /50 /63 /81 /74 /55 /56 /50 /44 /46 /56 /70 □ /83 /60 /54 /70 /81 /68 /46 /56 /55 /59 /55 /90 /44 /81 /68 /59 /46 /56 /70 /46 /45 /70 □ /82 /46 /50 /63 /62 /45 /61 □ /91 /43 /59 /55 /60 /56 /50 /92 /93 /59 /45 /46 □ /62 /45 /61 /92 /56 /44 /45 /47 /61 □ /58 /60 /56 /50 /73 /42 /43 /59 /55 /60 /56 □ /49 /80 /82/63 /66 /61 /44 /46 /45 /51/88 /94 /95 /92 /56 /44 /45 /47 /61 □ /92 /84 /84 /55 /57 /55 /44 /56 /57 /61 □ /65 /55 /44 /45 □ /74 /46 /59 /55 /56 /47/65 /55 /44 /45 □ /96 /83 /46 /56 /70 /54 /44 □ /65 /61 /43 /44 /78 /46 /45 □ /83 /46 /56 /70 /54 /44 /83 /60 /50 /44 □ /72 /44 /56 /47 /59 /63 □ /49 /84 /59 /97 /51/52 /88 □ /84 /59 /75 /73 /42 /76 /44 /45 □ /60 /84 □ /58 /61 /57 /54 /44 /50 /53 /75 /73 /42 /76 /44 /45 □ /60 /84 □ /69 /54 /46 /57 /44 □ /68 /44 /59 /59 /55 /56 /47 /50/52 /98 /69 /45 /60 /70 /73 /57 /59 □ /82 /44 /55 /47 /63 /59 □ /49 /54 /76 /97 /51/52 /52 /98 □ /54 /76 /74 /46 /57 /80 □ /99 /46 /59 /44 /45 /55 /46 /54 /75 /61 /54 /60 /56 /74 /44 /59 /73 /45 /56 /46 /76 /54 /44 /75 /60 /56 /85 /74 /44 /59 /73 /45 /56 /46 /76 /54 /44 /68 /55 /54 /87 /44 /45 /64 /46 /45 /44 □ /78 /46 /50 /80 /44 /59 □ /72 /60 /57 /46 /59 /55 /60 /56/96 /56 □ /74 /46 /57 /80 /68 /60 /73 /56 /70 □ /74 /46 /59 /55 /56 /47 □ /74 /46 /56 /47 /44 □ /49 /62 /44 /57 /55 /76 /44 /54 /50 /51/89 /73 /55 /44 /59 /44 /50 /59 /100 /101 /102 /103 /104 /105 /106 □ /108 /109 /110 /101 /109 /111 /110 /112/68 /43 /44 /57 /55 /84 /55 /57 /46 /59 /55 /60 /56 /50 /89 /73 /44 /50 /59 /55 /60 /56 /50 □ /113 □ /41 /56 /50 /64 /44 /45 /50 /58 /73 /50 /59 /60 /42 /44 /45 □ /74 /44 /87 /55 /44 /64 /50 /88 /77 □ /55 /56 /97 □ /69 /45 /55 /56 /59 /68 /63 /55 /44 /54 /70 □ /68 /59 /46 /55 /56 /54 /44 /50 /50 □ /68 /59 /44 /44 /54 □ /65 /60 /43 □ /58 /60 /56 /59 /45 /60 /54 □ /78 /73 /55 /54 /59 /85 /96 /56 □ /65 /46 /54 /54 □ /65 /73 /76 □ /62 /55 /50 /63 /64 /46 /50 /114 /76 /61 □ /49 /52 /52 /95 /79 /51
/115/116 /116 /117 /118/119 /119/120/52 /52 /121 /121/97/95 /95 /68 /46 /87 /44 □ /120 /79 /95 /97 /95 /95 □ /49 /79 /122/51 /123 /124 /125
KitchenAid *****
Color/Finish Stainless Steel with PrintShield™ Finish
J:t. u
t\J
.0 ,,
CII
a.i
LI.
/0
/1 /2 /3 /4 /5 /6 /7 □ /9 /10 /11 /7 /5 /2 /10 /12
/13 /14 /15 /14 /16 /17 /16 □ /17 /17 □
/20 /21 /22 /23 /24 /25 /21 /26
/27 □ □ □ /28 /29 /30 /31 /32 /33 /34 /35 □ /36 /37 /38 /39 /40 /41 /40 /38 /32 /38 /39 /42 /43 /44 /45 /46 □ /48 /49 /48 /50 /43 □ /51 /52 □ /53 /54 /43 □ /53 /43 /55 /56 /43 /50 /48 /53 /57 /50 /43 □ /44 /45 /58 /44 /59 /43 □ /51 /52 □ /60 /51 /57 /50 □ /46 /50 /44 /61 /61 □ /48 /61 /61 /51 /49 /58 □ /60 /51 /57 □ /53 /51 □ /48 /59 /62 /57 /58 /53 □ /53 /54 /43 □ /54 /43 /48 /53 □ /49 /54 /43 /45 □ /45 /43 /43 /59 /43 /59 /63 /64 □ □ □ /36 /65 /66 /67 /68 /69 /70 /69 /71 □ /70 /72 /39 /40 /30 /35 /73 □ /74 /72 /75 /76 /77 /43 /43 /56 /58 □ /52 /51 /51 /59 □ /49 /48 /50 /55 /78 □ /51 /50 □ /53 /51 /48 /58 /53 /58 □ /79 /57 /45 /58 /78 □ /49 /54 /44 /61 /43 □ /53 /54 /43 □ /55 /48 /44 /45 □ /80 /51 /57 /50 /58 /43 □ /81 /45 /44 /58 /54 /43 /58 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /51 /45 □ /53 /54 /43 □ /46 /50 /48 /53 /43 /63 □ /82 /51 /61 /59 □ /44 /53 □ /59 /51 /49 /45 □ /49 /54 /43 /45 □ /45 /51 /53 □ /44 /45 □ /57 /58 /43 □ /52 /51 /50 □ /43 /48 /58 /60 □ /58 /53 /51 /50 /48 /46 /43 /63 /83 □ □ □ /84 /41 /39 /75 /38 /31 /72 /30 /35 /33 /85 /35 /72 /40 /38 /31 /38 /86 /87 □ □ /66 /72 /88 /32 □ /34 /39 /41 /35 □ /66 /41 /41 /76 /30 /35 /73 □ /89 /39 /72 /32 /38 /88 /90 /51 /50 /80 /43 /61 /48 /44 /45 /91 /43 /45 /48 /55 /43 /61 /43 /59 /78 □ /80 /48 /58 /53 /91 /44 /50 /51 /45 □ /80 /51 /51 /92 /44 /45 /46 □ /46 /50 /48 /53 /43 /58 □ /56 /50 /51 /93 /44 /59 /43 □ /43 /93 /43 /45 □ /54 /43 /48 /53 □ /59 /44 /58 /53 /50 /44 /79 /57 /53 /44 /51 /45 □ /48 /80 /50 /51 /58 /58 □ /53 /54 /43 □ /43 /45 /53 /44 /50 /43 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /58 /57 /50 /52 /48 /80 /43 □ /48 /45 /59 □ /58 /57 /56 /43 /50 /44 /51 /50 □ /54 /43 /48 /53 □ /50 /43 /53 /43 /45 /53 /44 /51 /45 /63 □ □ /94 /95 /96 /91 /97 /98 /99 /78 □ /100 /91 /97 /98 /99 /78 □ /100 /96 /91 /97 /98 /99 □ /43 /101 /57 /44 /56 /56 /43 /59 □ /49 /44 /53 /54 □ /58 /53 /48 /44 /45 /61 /43 /58 /58 □ /58 /53 /43 /43 /61 □ /46 /50 /48 /53 /43 /58 /63 /102
/103 □ □ □ /104 /30 /86 /38 □ /36 /72 /105 /31 /38 /88 □ /106 /30 /32 /37 □ /34 /35 /32 /38 /73 /39 /72 /32 /38 /86 □ /36 /41 /41 /31 □ /107 /41 /41 /76 /88 /108 /58 /43 □ /53 /54 /43 □ /58 /44 /59 /43 □ /53 /48 /79 /61 /43 /58 □ /53 /51 □ /92 /43 /43 /56 □ /56 /61 /48 /53 /53 /43 /50 /58 /78 □ /58 /43 /48 /58 /51 /45 /44 /45 /46 /58 /78 □ /48 /45 /59 □ /53 /51 /51 /61 /58 □ /49 /44 /53 /54 /44 /45 □ /48 /50 /55 /109 /58 □ /50 /43 /48 /80 /54 /63 □ /110 /48 /45 /46 □ /60 /51 /57 /50 □ /43 /58 /58 /43 /45 /53 /44 /48 /61 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /53 /51 /51 /61 /58 □ /51 /45 □ /53 /54 /43 □ /54 /51 /51 /92 /58 □ /52 /51 /50 □ /43 /48 /58 /60 □ /48 /80 /80 /43 /58 /58 □ /48 /45 /59 □ /51 /50 /46 /48 /45 /44 /111 /48 /53 /44 /51 /45 □ /51 /52 □ /60 /51 /57 /50 □ /79 /48 /80 /92 /60 /48 /50 /59 □ /49 /51 /50 /92 /58 /56 /48 /80 /43 /63 /14 □ □ □ /30 /89 /74 /34 /112 /112 □ /114 □ /66 /41 /40 /115 /72 /32 /30 /105 /31 /38 /116 /54 /43 □ /44 /117 /50 /44 /61 /61 □ /97 □ /48 /56 /56 /91 /80 /51 /45 /45 /43 /80 /53 /43 /59 □ /53 /54 /43 /50 /55 /51 /55 /43 /53 /43 /50 □ /55 /51 /45 /44 /53 /51 /50 /58 □ /52 /51 /51 /59 □ /52 /50 /51 /55 □ /79 /43 /46 /44 /45 /45 /44 /45 /46 □ /53 /51 □ /43 /45 /59 /78 □ /59 /44 /58 /56 /61 /48 /60 /44 /45 /46 □ /53 /54 /43 □ /50 /43 /48 /61 /91 /53 /44 /55 /43 □ /53 /43 /55 /56 /43 /50 /48 /53 /57 /50 /43 □ /51 /45 □ /60 /51 /57 /50 □ /55 /51 /79 /44 /61 /43 □ /59 /43 /93 /44 /80 /43 /63 □ /94 /118 /80 /80 /43 /58 /58 /51 /50 /60 □ /58 /51 /61 /59 □ /58 /43 /56 /48 /50 /48 /53 /43 /61 /60 /63 /102
/119 □ □ □ /120 /29 /38 /31 □ /89 /72 /29 /73 /38
/116 /54 /43 □ /43 /48 /58 /60 /91 /53 /51 /91 /50 /43 /48 /59 □ /52 /57 /43 /61 □ /46 /48 /57 /46 /43 □ /61 /51 /80 /48 /53 /43 /59 □ /45 /43 /121 /53 □ /53 /51 □ /53 /54 /43 □ /46 /48 /58 □ /53 /48 /45 /92 □ /61 /43 /53 /58 □ /60 /51 /57 □ /58 /43 /43 □ /54 /51 /49 □ /55 /57 /80 /54 □ /52 /57 /43 /61 □ /44 /58 □ /61 /43 /52 /53 □ /44 /45 □ /53 /54 /43 □ /53 /48 /45 /92 /63 /13 □ □ □ /104 /30 /86 /38 □ /122 /41 /29 /35 /32 /38 /86 □ /89 /72 /88 □ /36 /72 /35 /76 /123 /51 /57 /45 /53 /44 /45 /46 □ /53 /54 /43 □ /46 /48 /58 □ /53 /48 /45 /92 □ /53 /51 □ /53 /54 /43 □ /51 /57 /53 /58 /44 /59 /43 □ /51 /52 □ /53 /54 /43 □ /46 /50 /44 /61 /61 □ /55 /48 /92 /43 /58 □ /44 /53 □ /43 /48 /58 /44 /43 /50 □ /53 /51 □ /48 /80 /80 /43 /58 /58 □ /48 /45 /59 □ /50 /43 /55 /51 /93 /43 /63 /124 □ □ □ /125 /115 /38 /35 □ /66 /72 /39 /32 □ /126 /38 /88 /30 /73 /35 /116 /54 /43 □ /58 /61 /43 /43 /92 □ /51 /56 /43 /45 /91 /80 /48 /50 /53 □ /59 /43 /58 /44 /46 /45 □ /56 /50 /51 /93 /44 /59 /43 /58 □ /43 /48 /58 /60 □ /48 /80 /80 /43 /58 /58 /44 /79 /44 /61 /44 /53 /60 □ /51 /52 □ /60 /51 /57 /50 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /53 /51 /51 /61 /58 /63 /127
/128
/129
/130
/131
/132
/133
/134
/13 /16 /135 □ /136 /137 /138 /136 □
/140
/21 /25 /20 /141 /25 /142 /22 /143 /144 /21 □
/138 /25 /137 /145 /145 /137 /143 /138 □ /26 /146 /26 /23 /21 /142 /135 □ □ □ /89 /39 /38 /72 /88 /38 □ /122 /72 /35 /72 /73 /38 /40 /38 /35 /32 □ /104 /147 /88 /32 /38 /40 /148 /50 /44 /56 /56 /44 /45 /46 /58 □ /53 /54 /48 /53 □ /48 /50 /43 □ /45 /51 /53 □ /93 /48 /56 /51 /50 /44 /111 /43 /59 □ /79 /60 □ /53 /54 /43 □ /82 /149 /118 /150 /151 /152 /153 /154 /96 /152 □ /42 /118 /152 /100 □ /48 /50 /43 □ /52 /57 /45 /45 /43 /61 /43 /59 □ /48 /49 /48 /60 □ /52 /50 /51 /55 □ /53 /54 /43 □ /79 /57 /50 /45 /43 /50 /58 □ /44 /45 /53 /51 □ /53 /54 /43 □ /59 /44 /58 /56 /51 /58 /48 /79 /61 /43 □ /59 /50 /44 /56 □ /53 /50 /48 /60 /78 □ /61 /51 /80 /48 /53 /43 /59 □ /49 /44 /53 /54 /44 /45 □ /53 /54 /43 □ /50 /43 /55 /51 /93 /48 /79 /61 /43 □ /80 /48 /53 /80 /54 □ /56 /48 /45 □ /57 /45 /59 /43 /50 □ /53 /54 /43 □ /80 /51 /51 /92 /79 /51 /121 /63 □ /100 /44 /55 /56 /61 /60 □ /50 /43 /55 /51 /93 /43 □ /53 /54 /43 □ /80 /48 /53 /80 /54 □ /56 /48 /45 □ /48 /45 /59 □ /50 /43 /56 /61 /48 /80 /43 □ /53 /54 /43 □ /59 /50 /44 /56 □ /53 /50 /48 /60 □ /48 /58 □ /45 /43 /43 /59 /43 /59 /63 /116 /54 /43 □ /117 /100 /155 □ /54 /44 /46 /54 □ /56 /43 /50 /52 /51 /50 /55 /48 /45 /80 /43 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /58 /60 /58 /53 /43 /55 □ /58 /43 /53 /58 □ /53 /54 /43 □ /58 /53 /48 /45 /59 /48 /50 /59 □ /44 /45 □ /53 /54 /43 □ /49 /51 /50 /61 /59 □ /51 /52 □ /46 /48 /58 □ /46 /50 /44 /61 /61 /44 /45 /46 /78 □ /48 /45 /59 □ /61 /48 /45 /59 /58 □ /156 /43 /79 /43 /50 □ /44 /45 □ /48 □ /80 /61 /48 /58 /58 □ /51 /52 □ /44 /53 /58 □ /51 /49 /45 /63 □ /116 /54 /44 /58 □ /56 /51 /49 /43 /50 /52 /57 /61 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /58 /60 /58 /53 /43 /55 □ /44 /58 □ /79 /48 /58 /43 /59 □ /51 /45 □ /51 /93 /43 /50 □ /157 /158 □ /60 /43 /48 /50 /58 □ /51 /52 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /43 /121 /56 /43 /50 /44 /43 /45 /80 /43 /78 □ /80 /57 /61 /44 /45 /48 /50 /60 □ /43 /121 /56 /43 /50 /53 /44 /58 /43 /78 □ /48 /45 /59 □ /55 /51 /58 /53 □ /44 /55 /56 /51 /50 /53 /48 /45 /53 /61 /60 /78 □ /53 /54 /43 □ /49 /48 /45 /53 /58 □ /48 /45 /59 □ /45 /43 /43 /59 /58 □ /51 /52 □ /53 /54 /43 □ /56 /43 /51 /56 /61 /43 □ /49 /54 /51 □ /55 /48 /53 /53 /43 /50 □ /55 /51 /58 /53 □ /159 □ /51 /57 /50 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /80 /51 /55 /55 /57 /45 /44 /53 /60 /63 □ /96 /48 /80 /54 □ /80 /51 /55 /56 /51 /45 /43 /45 /53 □ /51 /52 □ /117 /100 /155 □ /49 /48 /58 □ /57 /45 /44 /101 /57 /43 /61 /60 □ /59 /43 /58 /44 /46 /45 /43 /59 □ /52 /51 /50 □ /43 /48 /58 /43 /91 /51 /52 /91 /57 /58 /43 □ /48 /45 /59 □ /53 /51 □ /56 /50 /51 /93 /44 /59 /43 □ /48 /45 □ /57 /45 /43 /101 /57 /48 /61 /43 /59 □ /58 /48 /53 /44 /58 /52 /48 /80 /53 /44 /51 /45 □ /53 /51 □ /60 /51 /57 /50 □ /79 /48 /80 /92 /60 /48 /50 /59 □ /46 /50 /44 /61 /61 /44 /45 /46 □ /43 /121 /56 /43 /50 /44 /43 /45 /80 /43 /63
/160 □ □ /34 /161 /120 /34 /161 /34 /36 /71 □ /34 /73 /35 /30 /32 /30 /41 /35 /116 /54 /43 □ /153 /45 /81 /45 /44 /53 /60 □ /153 /46 /45 /44 /53 /44 /51 /45 □ /44 /58 □ /46 /57 /48 /50 /48 /45 /53 /43 /43 /59 □ /53 /51 □ /44 /46 /45 /44 /53 /43 /63 □ /152 /43 /58 /53 □ /48 /58 /58 /57 /50 /43 /59 □ /53 /54 /48 /53 □ /60 /51 /57 /109 /61 /61 □ /79 /43 □ /57 /56 /91 /48 /45 /59 /91 /46 /50 /44 /61 /61 /44 /45 /46 □ /53 /54 /43 □ /81 /50 /58 /53 □ /53 /44 /55 /43 /78 □ /43 /93 /43 /50 /60 □ /53 /44 /55 /43 /63 /162 □ □ □ /28 /29 /39 /35 /38 /39 /88
/116 /54 /43 □ /57 /45 /44 /101 /57 /43 /78 □ /53 /48 /56 /43 /50 /43 /59 □ /58 /54 /48 /56 /43 □ /59 /43 /61 /44 /93 /43 /50 /58 □ /48 □ /80 /51 /45 /58 /44 /58 /53 /43 /45 /53 □ /46 /48 /58 □ /163 /51 /49 □ /52 /50 /51 /55 □ /52 /50 /51 /45 /53 □ /53 /51 □ /79 /48 /80 /92 /63 □ /116 /54 /44 /58 □ /56 /50 /51 /93 /44 /59 /43 /58 □ /57 /61 /53 /44 /55 /48 /53 /43 □ /54 /43 /48 /53 □ /59 /44 /58 /53 /50 /44 /79 /57 /53 /44 /51 /45 /78 □ /43 /45 /58 /57 /50 /44 /45 /46 □ /53 /54 /48 /53 □ /52 /51 /51 /59 □ /46 /50 /44 /61 /61 /58 □ /43 /93 /43 /45 /61 /60 □ /48 /45 /59 □ /80 /51 /45 /58 /44 /58 /53 /43 /45 /53 /61 /60 □ /48 /45 /60 /49 /54 /43 /50 /43 □ /51 /45 □ /53 /54 /43 □ /80 /51 /51 /92 /44 /45 /46 □ /46 /50 /48 /53 /43 /58 /63 /164 □ □ □ /120 /112 /69 /165 /125 /74 /34 /166 /85 /74 □ /28 /69 /74 /104 /100 /53 /48 /44 /45 /61 /43 /58 /58 □ /100 /53 /43 /43 /61 □ /82 /149 /118 /150 /151 /152 /153 /154 /96 /152 □ /42 /118 /152 /100 □ /48 /50 /43 □ /48 /45 /46 /61 /43 /59 □ /62 /57 /58 /53 □ /50 /44 /46 /54 /53 □ /53 /51 □ /80 /48 /53 /80 /54 □ /59 /50 /44 /56 /56 /44 /45 /46 /58 □ /53 /54 /48 /53 □ /58 /55 /51 /92 /43 □ /48 /45 /59 □ /58 /44 /111 /111 /61 /43 /78 □ /48 /59 /59 /44 /45 /46 □ /53 /54 /48 /53 □ /44 /50 /50 /43 /58 /44 /58 /53 /44 /79 /61 /43 □ /58 /55 /51 /92 /60 □ /163 /48 /93 /51 /50 □ /53 /54 /48 /53 □ /49 /43 □ /48 /61 /61 □ /92 /45 /51 /49 □ /48 /45 /59 □ /61 /51 /93 /43 □ /53 /51 □ /60 /51 /57 /50 □ /52 /51 /51 /59 /63 /167
/168
/169
0 /0 /1 /2
/3 /4 /5 /6 /7 /8 /6 □ /10 /4 /7 /11 /11 □ /12 /13 /14 /5 /4 □ /15 □ /10 /5 /16 /5 /17 /7 /17 □ /18 /18 /19 /20 /21 /19 /22 /21 /19 /23 /21 /24
/25 /25 □ /26 /16 /27 □ /10 /5 /16 /5 /17 /7 /17 □ /24 /25 /25 □ /17 /5 /4 /7 /5 /17 □ □/29/29/29/29/29/29/29/29/29/29
Free Shipping on orders $50+. Order by 12/10 for delivery in time for Christmas on all grills. Learn More Accessories Accessories by Category Carts & Covers Premium Grill Cover - Genesis 11/EX/SX/LX 300 and Genesis 300 series Overview Specifications Reviews Add to Cart

4.4 598 Reviews
Write a review
$89.99
Product Features
Embrace the pouring rain, freezing snow, and scorching sun. The lightweight yet durable Premium Grill Cover makes it easy to pull on and off your grill. Its fastening straps keep it from blowing into your neighbor's yard, and wat Features
Related Products
Item#
Project
Date
For current specification sheets and other information, go to www.bunn.com.

Patents Apply
Easy Clear® EQ-17-TL
Product No. : 30200.1000
Dimensions:
127⁄16" H x 21⁄2" W x 3" D

31.6 cm H x 6.35 cm W x 7.62 cm D
Easy Clear® ED-17-TL
Product No. : 30201.1001
Dimensions: 81⁄4" H x 25⁄16" Dia.

20.95 cm H x 5.87 cm Dia.

Paper Filter Pack
Product No. : 20115.0000
Packed per case: 1,000
Dimensions:
41⁄4" Base x 23⁄4" Sidewall

10.8 cm Base x 6.98 cm Sidewall
Easy Pour® black decanter
Product No. : 06100.0101
Quantity: 1 (also packaged in
quantities of 2, 3, 6, 12, & 24)
Easy Pour® orange decanter (for decaf)
Product No. : 06101.0101
Quantity: 1
(also packaged in
quantities of 2, 3, 6, 12, & 24)
1/08 A1.6a
AXIOM Automatic Coffee Brewer
• Large 200 oz. (5.9 litres) tank provides back-to-back brewing capacity . • Dual voltage adaptable. Can operate at 120V/15 amp or 120/208-240V/20 amp.
• Adjusts automatically to varying water pressure.
• For high lime areas, BrewLOGIC™ technology calculates flow rate and adjusts brew time to maintain consistent pot levels.
• BrewWIZARD™ technology simplifies brewer programming with a LCD dis- play . Set brew level, cold brew lock-out and tank temperature from the front of the machine.
• Digital temperature control and accuracy .
• Ensures coffee brew quality with cold brew lock out capability . • Electronic diagnostics and built in tank drain make service easier. • SplashGard
® funnel deflects hot liquids away from the hand.
• Coffee extraction controlled with programmable pre-infusion, pul se brew and
digital temperature control.
• Automatic warmer shut-off.
• Energy-saver mode reduces tank temperature during idle periods.

AXIOM™ 12 Cup Dual-Voltage
Coffee Brewer
Model Agency Listing
AXIOM-DV-3 UL LISTED
Model AXIOM-DV-3
(decanters sold separately)
Dimensions: 18.9” H x 8.5” W x 17.7” D
(48cm H x 21.6cm W x 44.9cm D)
Model AXIOM-DV-3
(decanters sold separately)
Dimensions: 16.8” H x 16.5” W x 17.7” D
(42.7cm H x 41.9cm W x 44.9cm D)
1GPR SS Portable Server
on an RWS1 Warmer
1GPR Product No. : 12487.0001*
rWS1 Product No. : 12203.0010
*Also available with side handles
or black decor.
0~ ~ ------------------
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches. 1/08 © Bunn-O-Matic Corporation Dimensions & Specifications
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

334
0&
0&3(/7.
(/47! 4%2
,)&4&/2
3/-%-/$%,3
Model Product # Volts Amps Tank Heater Total Brewing Cu. Shipping Cord Watts Watts Capacity Ft. Weight Attached
AXIOM-DV-3 38700.0008 120 15 1425 1800 4.2 gal./hr. 4.0 30 lbs. Y es 1L/2U Warmers 120/208 15.5 2620 2980 7.5 gal./hr. 120/240 17.5 3500 3850 7.5 gal./hr.

AXIOM-DV-3 38700.0009 120 15 1425 1800 4.2 gal./hr. 6.4 32 lbs. Y es 3 Lower Warmers 120/208 15.5 2620 2980 7.5 gal./hr. 120/240 17.5 3500 3850 7.5 gal./hr.

Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise) per 1/2 gallon brew time of 4 minutes.

Electrical: 120 volt, 15 amp. models require 2-wires plus ground service rated 120V , single phase, 60 Hz.

If wired for 120/208V or 120/240V , required 3 wires plus ground service rated 120/208V or 120/240V , single phase, 60Hz.

Plumbing: 20-90 psi (138-621 kPa). Machines supplied with 1⁄4" male flare fitting. T win models supplied with 3⁄8" male flare fitting.
aXIom
3-Lower Warmers
aXIom
2-Upper/1 Lower Warmer
L_~~
!'(-)~"-) LC
==
~~ .~~+=---~l I 1~
1 " ITT
1'
~ ~~I ~ -
== == ==
0 J
0 I
== @
== == 0
4 -
SOME
MODELS ~=
Item #:

Project:

Qty:

AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

Mini Cubelet Dimensions*
* approximate size in inches, image not to scale
Features
• Up to 80 lbs. of ice production per 24 hours
• Up to 22 lbs. of built-in storage capacity
• Power switch accessible without panel removal
• Less than 34 inches tall (C-80BAJ, C-80BAJ-DS)
• Less than 32 inches tall; ADA Compliant
(C-80BAJ-AD, C-80BAJ-ADDS)
• Easily disassembled water circuit for easy cleaning
• Front in and out airflow
• Equipped with 6 ft. Cord with NEMA 5-15 Plug
• R-134A Refrigerant
Full length stainless steel door handle
UL approved for outdoor use
Undercounter design
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 7 - 113 PSIG
• Voltage Range 104-127V
Operating Limits
• Allow enough clearance at rear for water and drain
connections with 15” (38 cm) clearance in the front.
• Location must provide a firm and level foundation.
• Do not place near ovens, grills or other high heat
producing equipment.

Service
Hoshizaki reserves the right to change specifications without notice. 2 Year Parts & Labor on entire machine.
1 Year Parts & Labor on HS-5061 Drain Pump Assembly.

Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.

Warranty:

C-80BAJ-(AD)DS
C-80BAJ-(AD)DS
04/22/20
Item # 13229
3/8”
1/2”
5/8”
1/4”
(-AD) - ADA Compliant
(-DS) - Customized Cabinet Door System
with Built-In Storage Bin
W x D x H
147/8" x 225/8" x 331/2"
C-80BAJ / C-80BAJ-DS
147/8" x 225/8" x 311/2"
C-80BAJ-AD / C-80BAJ-ADDS
Air-Cooled
(Shown)
C-80BAJ
with Custom Cabinetry
(Shown)
C-80BAJ-DS*
Air-Cooled
ADA Compliant Unit
C-80BAJ-AD C-80BAJ-ADDS*
Air-Cooled
ADA Compliant Unit
*Customer responsible for providing cabinetry
• Optional Side Trim Kit: HS-0182
• Optional Top Trim Kit: HS-2133
• Optioinal Drain Pump Assembly: HS-5061
• Water filter: H9320-51
Parts
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 1/2” Nominal ID Hard Pipe or Equivalent
Plumbing
C-80BAJ(-DS)
C-80BAJ-AD(-DS)
Air 15A
15AAir
118 / 130
118 / 130
115V/60/1
115V/60/1
Air / Water Temp
Lbs. per 24 hoursCondenser Model
70°/ 50°F 90°/ 70°F

ICE PRODUCTION
Potable
Gal. per 100 lbs.

Condenser
Gal. per 100 lbs.

Max. Fuse Sz
or HACR
Circuit Bkr
Heat Rejection
BTU/hr.Voltage

WATER USAGE
90°/ 70°F 90°/ 70°F

ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs. Amperage Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount

3.92 oz

3.92 oz
80 80
45 45

17.3 17.3

12.0 12.0
N/A
N/A
1,850
1,850

4.0A

4.0A
Self-Contained Cubelet Ice Machine
Please refer to water filter spec sheet for recommended configurations.

Water Filter
Shipping Dimensions 203/4”x 301/2” x 40”
Shipping Dimensions 203/4”x 301/2” x 38”
* not including handle
Power cord included
)
~~
lntertek ■
y
i
►
►
►
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

FRONT VIEW
mm
[inch]

REAR VIEW
Front

SIDE VIEW FRONT VIEW

TOP VIEW
C-80BAJ*
C-80BAJ*
AIR IN

AIR OUT
C-80BAJ(-DS)*
C-80BAJ*

AIR OUT
C-80BAJ-(AD)DS
C-80BAJ-(AD)DS
04/22/20
Item # 13229
with Built-In Storage Bin
Self-Contained Cubelet Ice Machine
C-80BAJ-DS** -AD models have height ot 31.5”
* -AD models have height ot 31.5”
* -AD models have height ot 31.5”
----+
=er,
er,~
a:, (Y)
30 [ I . I 7 l

68.4 [ 2. 6 9 l
er,
r- er,

80.9 [ 3. I 9 l
(Y)=
r--
378
[ I 4. 89 l
⇒
376
[ 14. 8]

DOOR PANEL

WATER INLET
( I /2" FPT)
80 [ 3. I 4 l

DRAIN OUTLET
(1/2" FPT)
[ 22. 5 l
::;::;
'° 0.J r--~

POWER SUPPLY CORD
2m LONG OUTS I DE
(V")~
= IO 6. 9 400 ADJUSTABLE LEGS
=(V")
[ 4. 2 l [ 15. 7 l 0-5 [0-0.2]
378. 2
[ 14. 9 l
• •
376.4
[ 14. 8]
• DOOR PANEL •
=(Y)
er, (Y)
ro~

29.2 [ I . 2 l
LOLO
36 (V")('J
<D 0......0 [I. 41
-----+
+-----
11 :~ · ~,
~
574
[22.6]
504
[ 19 .8]

44.5 [I. 75 l ►
01 A
Cost:Item:Construction Notes:

1. Approx. 6’ x 8’

2. Black top with black square edge

3. Gold leaf trim and corner scrolls

4. Logo as seen

5. Epoxy finish
6’ x 8’ Table Table: $4400
Shipping: $900

01 A
Cost:Item:Construction Notes:

1. Approx. 42” x 120”

2. Red top with diamond plate edge

3. Gold leaf text as seen

4. Epoxy finish
Custom Table Table: $4000
Shipping: $900

KML-325/500M_J

LOW-PROFILE MODULAR CRESCENT CUBER
KML-325/500M_J
01/18/18
Item # 13413
Item #:

Project:

Qty:

AIA#:
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

KM Edge Cube Dimensions*
* approximate size in inches, image not to scale
Features
• KML-325: Up to 385 lbs. of ice production per 24 hrs. • KML-500: Up to 543 lbs. of ice production per 24 hrs. • Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
• EverCheck
TM alert system
• Removable air filters (Air-cooled model only)
• R-404A Refrigerant
Air-Cooled
KML-500MAJ
Individual crescent cube
Stainless steel evaporator
CycleSaver
TM design
TM
TM
Available on Bins:
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104 - 127V
Operating Limits
• Icemaker Water Supply Line: Min. 1/4” Nominal ID Copper Water Tubing or Equivalent
• Icemaker Drain Line: Min. 3/4” Nominal ID Hard Pipe or Equivalent Water-Cooled Model (Lines Must Be Independent of Icemaker) • Condenser Water Supply Line: Min. 1/4” Nominal ID Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Min. 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent

Plumbing
• Allow 6” (15 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance/service. • Removable air filters (air-cooled model only).

Service
30" x 273/8" x 22"
W x D x H
Hoshizaki reserves the right to change specifications without notice. ®
Printed in the U.S.A.
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator. 5 Year Parts on Compressor; air-cooled condenser coil.

Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.

Warranty:

Top kit may be required. See Bin Spec Sheets. *Two unit application only.

B-1150SS
B-1300SS
B-1500SS*
B-250PF
B-500PF/SF
B-700PF/SF
B-800PF/SF
B-900PF/SF
B-1150SS
B-1650SS*
DB-200H
DM-200B
380
385
442
543
300
355
400
515

5.72 4.51

5.55 4.33

19.9 17.0

16.0 16.0
N/A
106
N/A
110
15A
15A
20A
20A
5,800
5,500
6,200
8,000
115V/60/1
115V/60/1
115V/60/1
115V/60/1

8.4A

7.6A

9.6A
11/2”
1/2”
11/8”
Air-Cooled
Shown on optional bin B-500
KML-325MAJ
Water-Cooled
KML-325MWJ
Water-Cooled
KML-500MWJ
KMEdge
DESIGN
KML-325MAJ
KML-325MWJ
KML-500MAJ
KML-500MWJ
Air
Water
154 / 185
154 / 185
154 / 185
154 / 185
Air
Air / Water Temp
Lbs. per 24 hoursCondenser Model
70°/ 50°F 90°/ 70°F

ICE PRODUCTION
Potable
Gal. per 100 lbs.

Condenser
Gal. per 100 lbs.

Max. Fuse Sz
or HACR
Circuit Bkr
Heat
Rejection
BTU/hr.

Voltage

WATER USAGE
90°/ 70°F 90°/ 70°F

ELECTRICAL
90°/ 70°F
kWh Used
per 100 lbs. Amperage
Circuit
Wires
(including ground)
3 3
3 3
Net / Ship
Weight (lbs.)
Refrigerant
Charge Amount
1 lb. 5.2 oz.
1 lb. 1.6 oz.
1 lb. 10.5 oz.

15.9 oz.Water
331/4” x 331/2” x 28”
Shipping Dimensions
Please refer to water filter spec sheet for recommended configurations.

Water Filter
►
►
► ~ '------------ ___ __,
~ GUARD ~ PLUS
r l
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

BOTTOM VIEW REAR VIEW SIDE VIEW FRONT VIEW
Printed in the U.S.A.

WATER-COOLED

AIR-COOLED
Front
Front

AIR-COOLED

AIR-COOLED
Front
KML-325/500M_J

LOW-PROFILE MODULAR CRESCENT CUBER
KML-325/500M_J
01/18/18
Item # 13413
Front
30 - 5/32 '
17661
=
I . 1~ Nm
N~
0 I,
Water Inlet
1/2 FPT
Elect Supply
718' DIA Opening
30"
17621
27-318"
16951
22-13/32"
\569)
12 15/16"
(329)
Drain
3/ 4 FPT
L------J ~
Mounting Holes
3-5 /32 "
(80)
15 S/8 7 3/16
(397) (183)
16-11/16"
U24l
23-11/16"
(6Q2)
Opening
D
15-9116 ' 9-314 "
13951 12481
.I
Mounting Holes
3-5/32 "
(80)
l
,o
r-;-~
" -
"T
,o
" 0 , N
" -
=
Nm . 1~
N~
0 ~
I.

1. Water Inle t
Elect. Supply 1/2 FP T
7/8' DIA Open ing
Condense r
Waler Outlet
3/8 FPT
Mounting Holes
3-5132 °
(801
30-5132'
1766)
30 '
17621
27 - 318'
16951
22-13/32"
~
191/8"
(486)
1215/ 16"
G29l
16 -11/16 '
23 - 11/16'
(602)
(424)
Opening
I
15-9116' 9-314 '
~ 12481
.I
Mounting Holes
l
,o
"0 ,N
" -
ro1~ ,o
"0 ,N
" -
UW Series Hardmount
Washer-Extractors
35 lb Washer-Extractor
60 lb Washer-Extractor
80 lb Washer-Extractor
100 lb Washer-Extractor
125 lb Washer-Extractor
150 lb Washer-Extractor
Expert Solutions from the Laundry Experts
AU07-204
Alliance Laundry Systems
Shepard Street, Ripon, WI 54971 T elephone: 1-800-587-5458 www.uniwash.com
UW35 UW35 UW35 UW60 UW60 UW60 UW80 UW100 UW125 UW150
2-spd* 3-spd* PV: 7-spd 2-spd* 3-spd* PV: 7-spd PV: 7-spd PV: 7-spd PV: 7-spd PV: 7-spd Control Options B, P PP B, P PPPPP P
Capacity - lb (kg) 35 (16) 35 (16) 35 (16) 60 (27) 60 (27) 60 (27) 80 (36) 100 (45) 125 (57) 150 (68) Cylinder Diameter - 26 1/4" (667) 26 1/4" (667) 26 1/4" (667) 32" (813) 32 " (813) 32 " (813) 36 " (914) 36 " (914) 42 " (1067) 43 " (1093) in (mm)
Cylinder Depth - in (mm)18 3/8" (467) 18 3/8" (467) 18 3/8" (467) 20" (508) 20 " (508) 20 " (508) 21 " (533) 27 " (686) 24 " (610) 2 7 13/16" (706) Cylinder Volume - 5.76 (163) 5.76 (163) 5.76 (163) 9.31 (264) 9.31 (264) 9.31 (264) 12.4 (350) 15.9 (450) 19.24 (544) 23.38 (662) cu. ft. (liters)
Height - in (mm) 55 1/2
" (1410) 551/2" (1410) 551/2" (1410) 641/2" (1638) 641/2" (1638)64 1/2" (1638) 68 1/2" (1740) 68 1/2" (1740) 72" (1829) 79 " (2007) Width - in (mm) 32 1/ 2" (826) 32 1/2" (826) 321/2" (826) 36 5/8" (930) 36 5/8" (930) 36 5/8" (930)41 1/2" (1054)41 1/2" (1054) 48" (1219) 50 " (1270) Depth - in (mm) 38 1/ 4" (972) 38 1/4" (972) 43 5/8" (1108) 45" (1143) 45 " (1143) 45 " (1143) 51 1/2" (1308) 541 /2" (1384) 58" (1473) 63 " (1600) Door Opening Size - 14 3/8" (364) 14 3/8" (364) 14 3/8" (364) 17 1/2" (445) 17 1/2" (445) 17 1/2" (445) 17 1/2" (445) 17 1/2" (445) 20" (508) 2 4 3/4" (629) in (mm)
Door Bottom To Floor - 23 3/4" (603) 23 3/4" (603) 23 3/4" (603) 28 1/4" (718) 28 1/4" (718) 28 1/4" (718) 29" (737) 29 " (737) 29 " (737) 32 " (813) in (mm)
Motor Size - HP (kW) 1.8 (1.3) 3 (2.2) 3 (2.2) 3 (2.2) 3.5 (2.6) 5 (3.7) 7 .5 (5.6) 7 .5 (5.6) 10 (7 .5) 10 (7 .5) Gentle Speed - RPM N/A N/A 26 N/A N/A 26 26 26 26 23
Wash Speed - RPM 50 45 42 44 42 40 40 40 37 36
Distribution Spd - RPM N/A 75 83 N/A 67 71 71 70 62 61
Medium Speed - N/A N/A 328 (40) N/A N/A 305 (42) 325 (54) 325 (54) 260 (40) 262 (42) RPM (G-Force)
High 1 Extract - 504 (95) 597 (133) 534 (106) 465 (98) 561 (143) 483 (106) 456 (106) 456 (106) 422 (106) 417 (106) RPM (G-Force)
High 2 Extract - N/A N/A 613 (140) N/A N/A 555 (140) 524 (140) 524 (140) 485 (140) 512 (160) RPM (G-Force)
High 3 Extract - N/A N/A 898 (300) N/A N/A 813 (300) 766 (300) 766 (300) 580 (200) 701 (300) RPM (G-Force)
Drain Diameter - 2 3/8
" (60) 2 3/8" (60) 2 3/8" (60) 3 " (76) 3 " (76) 3 " (76) (2 ea.) 3 " (76) (2 ea.) 3" (76) (2 ea.) 3" (76) (2 ea.) 3" in (mm) (76)
Steam Connection - 1/2" (13) 1/ 2" (13) 1/ 2" (13) 1/ 2" (13) 1/ 2" (13) 1/ 2" (13) 1/ 2" (13) 1/ 2" (13) 3/4 " (19) 3/4 " (19) in (mm)
Water Inlet Connection - 3/4" (19) 3/4 " (19) 3/4 " (19) 3/4 " (19) 3/4 " (19) 3/4 " (19) 3/4 " (19) 3/4 " (19) (2 ea) 1" (25)/ (2 ea) 1" (25)/ in (mm) (2 ea) 3/4" (19) (2 ea) 3/4" (19)
Net Weight - lb (kg) 750 (341) 750 (341) 1030 (468) 1136 (515) 1229 (557) 1300 (590) 1730 (785) 1770 (805) 2420 (1100) 2970 (1347) Agency Approvals** ETL, ETLc ETL, ETLc ETL, ETLc, CE ETL, ETLc ETL, ETLc ETL, ETLc, CE ETL, ETLc, CE ETL, ETLc, CE ETL, ETLc, CE ETL, ETLc, CE Specifications
* Two-and three-speed washers may not include all of the features within the brochure. ** Agency approvals may vary depending on configuration.

Consult factory for details. Standard domestic voltage 208-240/60/3. 230V/50Hz/1&3 phase and 380V/50Hz/3 phase units are available.

All CE approved models available in 50-cycle. Contact your distributor for specific models available with CE. For electrical specifications, circuit breaker requirements and full load amperages, see your authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use 3-pole circuit breakers for 3-phase machines.

Due to continuous product improvements, design and specifications subject to change without notice. The quality management systems at all Alliance Laundry Systems manufacturing facilities are registered as ISO 9001:2000 compliant. ©Copyright 2007 Alliance Laundry Systems LLC
UniMac has been manufacturing commercial laundry
equipment for over 60 years. By now, we know a thing or two about what it takes to cost effectively operate a laundry room. Through the years we have helped our customers to improve working conditions for laundry room staff, lower operating expenses in their department and increase cash flow for their company. Relax, you can count on UniMac to provide the Expert Solution for your particular challenge.

That’s why we are the Laundry Experts.

Labor-Cost Savings
Did you know labor costs eat up 50% of your laundry
dollar? Imagine the thousands of dollars you’d save if you could reduce your laundry labor by 30 minutes per day!
UniMac’s UWPV Series Washer-Extractor transforms your
dream into reality.

Four Fast-Fill Water Valves(instead of the customary
two) fill UWPV models much faster, shaving valuable
minutes off every cycle.

Extraction Speeds ofup to 300 G-Force— that’s
2-3 times the G’s of most machines — aid UniMac’s
UWPV models in reducing the amount of moisture left
in washloads. This greatly reduces drying time saving
significantly on labor costs.

Our Advanced Computer Control
accurately senses drain time
completion, while precisely advanc-
ing to the next step in the wash cycle.

Our Smart Drainsaves time and
money, when compared to less
expensive models, which have fixed
drain times that may lengthen the total cycle time by
several minutes.

A Rapid Jetspray Rinsesaves nearly
three minutes on every rinse step!
The spray rinse pulls water through
linens, allowing it to drain immediately,
rather than cycling through the time
consuming fill, agitation and drain
phases of the traditional bath rinse.

This is one of UniMac’s most impressive
timesaving features.

The Overnight Delayed Startfeature gives you a
30-minute head start each day! By loading the
washer and selecting the programmable delayed
start cycle, your linens will be ready for the dryer
immediately the next morning. This headstart can
save 30-minutes per day.

The UWPV models can be programmed with the
shortest wash cycles in the industry. When the
four Fast-Fill Water Valvesare combined with
Rapid Jetspray Rinse,Smart Drain, and our end
of Cycle Rotation Sensor, you will cut laundry
operating time. Saving time will save labor costs.

Warranty
Our warranty is your
insurance policy. We
demonstrate our confi-
dence in our UWPV by
giving you the best
warranty in the industry.

UniMac provides afive-year
warranty on the frame, basket,
shaft, bearings and sealsif failure or breakage should
occur during normal operation due to defects in
material or workmanship. A full three-year warranty also is issued to the original purchaser on all other parts.

Utility-Cost Savings
Utility costs account for approximately 10% of your
laundry dollar. By selecting laundry equipment with
advanced features, utility costs can be controlled.

If a typical laundry facility processes around 4,000
cycles per year, even small savings per cycle will really add up. UniMac’s UWPV series has the solution for
controlling your utility costs:

Electricity
Save 40% or more with our state-of-the-art
Frequency Drive System. It saves money by gradually
and efficiently ramping up to extraction speed. You’ll also save electricity with our industry-leading short cycle
times created with ourRapid Jetspray Rinse, four
Fast-Fill Water Valves andsmart drains.

Gas
Dryer time is shorter due to 300 G-Force super high
extraction speeds. By operating your dryer less each day, you reduce yourcost of energy by $100’s per year.

Water
Large capacity cylinders help you reduce the number of
wash cycles per day...per month...per year! These savings can be as much as 10% under competitors’ models!
Value For Y our Money
Cost and value are not synonymous. Often the lowest-
priced laundry equipment ends up being the most
expensive to own in terms of maintenance, performance
and ease-of-use. One way of measuring a washer-
extractor’s value is to take a look atstandard features.

UniMac is committed to providing you with the maximum
value. Many of the features considered“add-ons” by
our competitorsare standard on our UWPV washer-
extractors.

Important standard features include:

Temperature Controlled Fill
Thermal Cool Down
Overnight Soak
Overflow Rinse
Stainless Steel Construction
Brass Fill Valves
Polypropylene Chemical Supply Dispenser
Programmable Drive System
Two Wash Speeds (PV Models)
55 key points:

Labor-Cost Savings
Utility-Cost Savings
Value For Your Money
Proven Performance
Warranty
Proven
Performance
You want your decision to be a
lasting one, so choose a washer-
extractor that is durable and
virtually maintenance-free, with
a proven performance history.

You won’t find another washer-
extractor with the durability
and performance record of UniMac’s UWPV series.

Our heavy-dutyGamma A-frame, made of4" H-beam ,
has been the industry model of strength and durability.

Our low maintenanceV-Belt Drive provides high-
efficiency, dependability and smooth operation, without unnecessary transmissions or clutches. With fewer
moving parts, our drive system requires less maintenance.

UniMac’s expertise is the result of over 60 years as the leader in technological innovation. We’ve led the industry in developing technologically advanced solutions, such as Microprocessor Controls, Frequency Drive System,
Rapid Jetspray Rinse, Super-high G-Force and two
wash speeds.