City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
CONTRACT NUMBER MA# ____
BETWEEN
CITY OF ANAHEIM
AND
OneSource Supply Solutions, LLC
FOR
Electrical Connectors, Fuses, and Other Components
This agreement Contract Number MA#_____ for Electrical Connectors, Fuses, and Other Components, (hereinafter referred to as “Contract ”) is entered by and between the City of Anaheim, a municipal corporation duly organized and validly existing under the laws of the State of California with the power to carry on its business as it is now being conducted under the statutes of the State of California and the Charter City of Anaheim, (hereinafter referred to as “City”), with a place of business at 200 S. Anaheim Blvd., Anaheim, CA 92805 and OneSource Supply Solutions, LLC, a Delaware limited liability company (hereinafter referred to as “Contractor”), with a place of business at 9820 Willow Creek Road Suite #150, San Diego, CA , 92131, with City and Contractor sometimes individually referred to as “Party”, or collectively referred to as “Parties.”
ATTACHMENTS
This Contract is comprised of this document and the following Attachments, which are attached hereto and incorporated by reference into this Contract:
Attachment A – Scope of Work and Specifications
Attachment B – Pricing, Payment and Compensation
RECITALS
WHEREAS, the Anaheim Public Utilities Department (“APU”) issued a Request for Proposal (“RFP”) for Electrical Connectors, Fuses, and Other Components (“Deliverables”) on January 14, 2026; and
WHEREAS, Contractor responded to the RFP for the Deliverables, and represented that its proposed services shall meet or exceed the requirements of the RFP; and WHEREAS, City desires to enter into this Contract for the Deliverables with the Contractor as further set forth in this Contract and subsequent attachments effective on the date of execution by City (“Effective Date”); and
WHEREAS, Contractor agrees to provide the Deliverables based on the Scope of Work and Specifications, attached hereto as Attachment A; and
WHEREAS, City agrees to pay Contractor based on the schedule of fees set forth in Pricing, Payment, and Compensation, attached hereto as Attachment B, in an amount not-to-exceed five million, six hundred thousand dollar s and 00/100 cents ($5,600,000.00) for Term of the Contract (“Contract Amount”).
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
NOW, THEREFORE, the Parties mutually agree as follows:
ARTICLES
I. General Terms and Conditions:
A. Governing Law and Venue: This Contract has been negotiated and executed in the state of California and shall be governed by and construed under the laws of the state of California. In the event of any legal action to enforce or interpret this Contract, the sole and exclusive venue shall be a court of competent jurisdiction located in Orange County, California, and the Parties hereto agree to and do hereby submit to the jurisdiction of such court, notwithstanding Code of Civil Procedure section 394. Furthermore, the parties specifically agree to waive any and all rights to request that an action be transferred for adjudication to another county.
B. Entire Contract: This Contract contains the entire agreement between the Parties with respect to the matters herein, and there are no restrictions, promises, warranties or undertakings other than those set forth herein or referred to herein. No exceptions, alternatives, substitutes or revisions are valid or binding on City unless authorized by City in writing. Electronic acceptance of any additional terms, conditions or supplemental Contracts by any City employee or agent, including but not limited to installers of software, shall not be valid or binding on City unless accepted in writing by City’s Purchasing Agent or designee.
C. Amendments: No alteration or variation of the terms of this Contract shall be valid unless made in writing and signed by the P arties; no oral understanding or agreement not incorporated herein shall be binding on either of the Parties; and no exceptions, alternatives, substitutes or revisions are valid or binding on City unless authorized by City in writing.
D. Taxes: Unless otherwise provided herein or by law, price quoted does not include California state sales or use tax. Out -of-state Contractors shall indicate California Board of Equalization permit number and sales permit number on invoices, if California sales tax is added and collectable. If no permit numbers are shown, sales tax will be deducted from payment.
E. Delivery: Timely delivery of the materials is of the essence in this Contract. City reserves the right to refuse any commodities and services and to cancel all or any part of the commodities not conforming to applicable specifications, drawings, samples or descriptions or services that do not conform to the prescribed scope of work. Acceptance of any part of the order for commodities shall not bind City to accept future shipments nor deprive it of the right to return commodities already accepted at Contractor’s expense. Over shipments and under shipments of commodities shall be only as agreed to in writing by City . Delivery shall not be deemed to be complete until all commodities or services have been received and accepted in writing by City.
F. Acceptance Payment: Unless otherwise agreed to in writing by City: 1) acceptance shall not be deemed complete unless in writing and until all the commodities/services have actually been received, inspected, and tested to the satisfaction of City, and 2) payment shall be made in arrears after satisfactory acceptance.
G. Warranty: Contractor expressly warrants that the goods covered by this Contract are : 1) free of liens or encumbrances, 2) merchantable and good for the ordinary purposes for which they are used, and 3) fit for the particular purpose for which they are intended. Acceptance of this order shall constitute an agreement upon Contractor’s part to indemnify, defend and hold City and its indemnities as identified in Article I, section “Z” harmless from liability, loss, damage and expense, City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
including reasonable counsel fees, incurred or sustained by City by reason of the failure of the goods/services to conform to such warranties, faulty work performance, negligent or unlawful acts, and non- compliance with any applicable state or federal codes, ordinances, orders, or statutes, including the Occupational Safety and Health Act (OSHA) and the California Industrial Safety Act.
Such remedies shall be in addition to any other remedies provided by law.
H. Patent/Copyright Materials/Proprietary Infringement: Unless otherwise expressly provided in this Contract, Contractor shall be solely responsible for clearing the right to use any patented or copyrighted materials in the performance of this Contract. Contractor warrants that any software as modified throug h services provided hereunder will not infringe upon or violate any patent, proprietary right, or trade secret right of any third party. Contractor agrees that, in accordance with the more specific requirement contained in Article I, section “Z” below, it shall indemnify, defend and hold City and City Indemnitees harmless from any and all such claims and be responsible for payment of all costs, damages, penalties and expenses related to or arising from such claim(s), including, costs and expenses but not including attorney’s fees.
I. Assignment: The terms, covenants, and conditions contained herein shall apply to and bind the heirs, successors, executors, administrators and assigns of the P arties. Furthermore, neither the performance of this Contract nor any portion thereof may be assigned by Contractor without the express written consent of City. Any attempt by Contractor to assign the performance or any portion thereof of this Contract without the express written consent of City shall be invalid and shall constitute a breach of this Contract.
J. Non-Discrimination: In the performance of this Contract, and to the extent applicable, Contractor agrees that it will comply with the requirements of Section 1735 of the California Labor Code and not engage nor permit any subcontractors to engage in discrimination in employment of persons because of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, marital status, or sex of such persons. Contractor acknowledges that a violation of this provision shall subject Contractor to penalties pursuant to Section 1741 of the California Labor Code.
K. Termination: In addition to any other remedies or rights it may have by law, City has the right to immediately terminate this Contract without penalty for cause or after 30 days’ written notice without cause, unless otherwise specified. Cause shall be defined as any material breach of contract, any misrepresentation or fraud on the part of Contractor. Exercise by City of its right to terminate the Contract shall relieve City of all further obligation.
L. Consent to Breach Not Waiver: No term or provision of this Contract shall be deemed waived, and no breach excused, unless such waiver or consent shall be in writing and signed by the P arty claimed to have waived or consented. Any consent by any party to, or waiver of, a breach by the other, whether express or implied, shall not constitute consent to, waiver of, or excuse for any other different or subsequent breach.
M. Independent Contractor: Contractor shall be considered an independent contractor and neither Contractor, its employees, nor anyone working under Contractor shall be considered an agent or an employee of City. Neither Contractor, its employees nor anyone working under Contractor shall qualify for workers’ compensation or other fringe benefits of any kind through City.
N. Performance Warranty: Contractor shall warrant all work under this Contract, taking necessary steps and precautions to perform the work to City ’s satisfaction. Contractor shall be responsible for the professional quality, technical assurance, timely completion , and coordination of all City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
documentation and other commodities/services furnished by Contractor under this Contract.
Contractor shall perform all work diligently, carefully, and in a good and workmanlike manner; shall furnish all necessary labor, supervision, machinery, equipment, materials, and supplies, shall at its sole expense obtain and mainta in all permits and licenses required by public authorities, including those of City required in its governmental capacity, in connection with performance of the work. If permitted to subcontract, Contractor shall be fully responsible for all work performed by subcontractors.
O. Bonding and Insurance Requirements : Some procurements may require bonding and/or insurance. Specific requirements will be stated in the applicable bid documents. In the event bonding is required, bonds shall be submitted in a form acceptable to City (samples may be included in the solicitation documents). Checks or letters of credit will not be accepted in lieu of bonding.
Without limiting City’s right to indemnification, it is agreed that Contractor shall secure, prior to commencing, any activities under this Contract, and maintain, during the term of this Contract.
When work will be performed on City property, City’s standard minimum insurance requirements (shown below) will apply, unless otherwise indicated in the bid specifications.
Commercial General Liability Insurance, including coverage for Premises and Operations, Contractual Liability, Personal Injury Liability, Products/Completed Operations Liability, as well as Independent Contractor’s Liability where appropriate, in an amount not less than $2,000,000 per occurrence, $4,000,000 annual aggregate, written on an occurrence form. Such insurance shall be written on a primary basis but may include a deductible or self -insured retention of more than $10,000 per occurrence, provided that such deductible or self-insured retention is disclosed to the City, in writing, at the inception of this Contract.
Comprehensive Automobile Liability Coverage, including —as applicable—owned, non-owned, and hired autos, in an amount not less than $2,000,000 per occurrence, combined single limit, as required by California law.
Workers’ Compensation Insurance as required by California law and Employers Liability Insurance in an amount not less than $1,000,000. A Waiver of subrogation is required for Workers’ Compensation coverage.
Contractor is responsible for the payment/satisfaction of any applicable deductible or self -insured retention.
It is agreed that any insurance maintained by Contractor pursuant to this Contract shall be primary to, and not contribute with, any insurance or self-insurance maintained by the City of Anaheim
Coverage Minimum Limits
Commercial General Liability
$2,000,000 occurrence
$4,000,000 aggregate
Automobile Liability including coverage for owned, non -owned and hired vehicles
$2,000,000 combined single limit
per occurrence
Workers’ Compensation
Statutory
Employers’ Liability Insurance
$1,000,000 per occurrence
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
City’s Risk Manager is hereby authorized to amend the requirements set forth herein in the event that such amendment is in City’s best interest.
Contractor agrees that this insurance shall not be voluntarily cancelled by Contractor or limited in scope or coverage by Contractor until after thirty (30) days prior written notice has been given to the City Clerk, City of Anaheim, 200 S. Anaheim Blvd., Anaheim, CA 92805. This does not apply to cancellation for non-payment of premium, which requires notice of not less than ten (10) days.
The City of Anaheim, its officers, agents, employees, representatives and City- designated volunteers are added as additional insured as respects the acts, omissions, operations and activities of, or on behalf of, the named insured, in regard to products s upplied to, or work or services performed for, or related to, the City of Anaheim.
Insurance certificates should state:
City of Anaheim
Attn: City Clerk’s Office
200 S. Anaheim Blvd., 2
nd Floor
Anaheim, CA 92805
Insurance certificates should be emailed to [email protected]
Prior to commencing any work under this Contract, Contractor shall deliver to City insurance certificates confirming the existence of the insurance required under this Contract, and including the applicable clauses referenced above. Also, within thirty (30) days of the execution date of this Contract, Contractor shall provide the City : (i) endorsements to the insurance policies that add to these policies the applicable clauses referenced above, or (ii) in lieu of said endorsements, documentation acceptable to City evidencing that the coverage, terms, and conditions set forth in the above-referenced clauses are otherwise included in said insurance policies. Insurance required hereunder shall be placed with insurers (i) admitted to write insurance in California, (ii) possessing an A. M. Best’s rating of A VII or higher, or (iii) otherwise acc eptable to City, with prior written permission from City. In the event that a claim or other legal action is filed against City, and if City, in its good faith opinion, believes it may have coverage under any of the insurance required herein, then City has the right to demand, and to receive within a reasonable time period, copies of the insurance policies related to such required insuran ce; provided, however, that this provision shall not apply if the Parties agree that Contractor shall fully defend, hold harmless, and indemnify City against any such claim or other legal action.
In addition to other remedies City may have if Contractor fails to provide or maintain any insurance policies or policy endorsements to the extent and within the time herein required, City may, at its sole option:
a. Order Contractor to stop work under this Contract and/or withhold any payment(s) that become due to Contractor hereunder until Contractor demonstrates compliance with the requirements hereof; and/or
b. Terminate this Contract.
Exercise of any of the above remedies, however, is an alternative to other remedies City may have and is not the exclusive remedy for Contractor’s failure to maintain insurance or secure appropriate endorsements.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Nothing herein contained shall be construed in any way as limiting the extent that a Contractor may be held responsible for payments of damages to persons or property resulting from Contractor’s, (or Contractor’s Agent or Sub-Agent, if any) performance of the work covered under this Contract.
In the event Contractor hires other persons or firms to perform some of the work related to this Contract, Contractor shall ensure: (i) that the acts or omissions of such persons or firms are covered under the above-referenced liability insurance, or (ii) that such firms maintain insurance equal to or better than, and subject to the same limits, terms and conditions as, the insurance required of Contractor under this Contract (except for firms that are not performing professional services — such firms shall not be required to carry the above-referenced professional liability insurance); and in either instance, Contractor shall provide, or cause to be provided, evidence of such insurance coverage, reasonably acceptable to City.
P. Changes: Contractor shall make no changes in the work or perform any additional work without City’s specific written approval.
Q. Change of Ownership/Name, Litigation Status, Conflicts with City Interests: Contractor agrees that if there is a change or transfer in ownership of Contractor’s business prior to completion of this Contract, and City agrees to an assignment of Contract, the new owners shall be required under the terms of sale or other instruments of transfer to assume Contractor’s duties and obligations contained in this Contract and complete them to the satisfaction of City.
City reserves the right to immediately terminate the Contract in the event City determines that the assignee is not qualified or is otherwise unacceptable to City for the provision of services under the Contract.
In addition, Contractor has the duty to notify City in writing of any change in Contractor ’s status with respect to name changes that do not require an assignment of Contract . Contractor is also obligated to notify City in writing if Contractor becomes a party to any litigation against City, or a party to litigation that may reasonably affect Contractor’s performance under the Contract, as well as any potential conflicts of interest between Contractor and City that may arise prior to or during the period of Contract performance. While Contractor will be required to provide this information without prompting from City any time there is a change in Contractor’s name, conflict of interest or litigation status, Contractor must also provide an update to City of its status in these areas whenever requested by City.
Contractor shall exercise reasonable care and diligence to prevent any actions or conditions that could result in a conflict with City interests. In addition to Contractor, this obligation shall apply to Contractor’s employees, agents, and subcontractors associated with the provision of goods and services provided under this Contract. Contractor’s efforts shall include, but not be limited to, establishing rules and procedures preventing its employees, agents, and subcontractors from providing or offering gifts, entertainment, payments, loans or other considerations which could be deemed to influence or appear to influence City staff or elected officers in the performance of their duties.
R. Force Majeure: Contractor shall not be assessed with liquidated damages or unsatisfactory performance penalties during any delay beyond the time named for the performance of this Contract caused by any act of God, war, civil disorder, employment strike or other cause be yond its reasonable control, provided Contractor gives written notice of the cause of the delay to City within 36 hours of the start of the delay and Contractor avails himself of any available remedies.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
S. Confidentiality: Contractor agrees to maintain the confidentiality of all City and City-related records and information pursuant to all statutory laws relating to privacy and confidentiality that currently exist or exist at any time during the term of this Contract. All such records and information shall be considered confidential and kept confidential by Contractor and Contractor’s staff, agents and employees.
T. Compliance with Laws: Contractor represents and warrants that services to be provided under this Contract shall fully comply, at Contractor’s expense, with all standards, laws, statutes, restrictions, ordinances, requirements, and regulations (collectively “laws”), including, but not limited to those issued by City in its governmental capacity and all other laws applicable to the services at the time services are provided to and accepted by City . Contractor acknowledges that City is relying on Contractor to ensure such compliance, and pursuant to the requirements of Article I, section “Z” below, Contractor agrees that it shall defend, indemnify and hold City and City Indemnitees harmless from all liability, damages, costs and expenses arising from or related to a violation of such laws.
U. Freight: Prior to City ’s express acceptance of delivery of products. Contractor assumes full responsibility for all transportation, transportation scheduling, packing, handling, insurance, and other services associated with delivery of all products deemed necessary under the Contract.
V. Severability: If any term, covenant, condition or provision of this Contract is held by a court of competent jurisdiction to be invalid, void, or unenforceable, the remainder of the provisions hereof shall remain in full force and effect and shall in no way be affected, impaired or invalidated thereby.
W. Attorney Fees: In any action or proceeding to enforce or interpret any provision of this Contract, each Party shall bear their own attorney’s fees, costs and expenses.
X. Interpretation: This Contract has been negotiated at arm’s length and between persons sophisticated and knowledgeable in the matters dealt with in this Contract. In addition, each Party had been represented by experienced and knowledgeable independent legal counsel of their own choosing or has knowingly declined to seek such counsel despite being encouraged and given the opportunity to do so. Each P arty further acknowledges that they have not been influenced to any extent whatsoever in executing this Cont ract by any other party hereto or by any person representing them, or both. Accordingly, any rule or law (including California Civil Code section 1654) or legal decision that would require interpretation of any ambiguities in this Contract against the Party that has drafted it is not applicable and is waived. The provisions of this Contract shall be interpreted in a reasonable manner to affect the purpose of the Parties and this Contract.
Y. Employee Eligibility Verification: Contractor warrants that it fully complies with all Federal and State statutes and regulations regarding the employment of aliens and others and that all its employees performing work under this Contract meet the citizenship or alien status requirement set forth in Federal statutes and regulations. Contractor shall obtain from all employees performing work hereunder, all verification and other documentation of employment eligibility status required by Federal or State statutes and regulations including, but not limited to, the Immigration Reform and Control Act of 1986, 8 U.S.C. §1324 et seq., as they currently exist and as they may be hereafter amended. Contractor shall retain all such documentation for all covered employees for the period prescribed by the law. Contractor shall indemnify, defend with counsel approved in writing by City, and hold harmless, City, its agents, officers, and employees from employer sanctions and any other liability which may be assessed against Contractor or City or both in connection with any alleged City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
violation of any Federal or State statutes or regulations pertaining to the eligibility for employment of any persons performing work under this Contract.
Z. Hold Harmless and Indemnification: To the fullest extent permitted by law, Contractor agrees to indemnify, defend, at City’s option, and hold harmless City, its officials, officers, employees, agents, and representatives from and against any and all claims, losses, damages, defense costs, or liability, of any kind or nature (collectively referred to hereinafter as “Claims”), arising out of or in connection with Contractor’s (or Contractor’s contractors’ or subcontractors’, if any) (i) acts, errors, or omissions, (ii) performance or failure to perform, (iii) goods or services provided, or (iv) work performed by, or on behalf of, Contractor, relative to this Contract , except for those Claims which arise out of the sole negligence or willful misconduct of City.
The obligations set forth in this indemnification provision (i) shall be in effect without regard to whether City, Contractor, or any other person maintains, or fails to maintain, insurance coverage, or a self -insurance program, for any such Claims and (ii ) shall survive the termination of this Contract.
AA. Audits/Inspections: Contractor agrees to permit City’s authorized representative (including auditors from a private auditing firm hired by City ) access during normal working hours to all books, accounts, records, reports, files, financial records, supporting documentation, including payroll and accounts payable/receivable records, and other papers or property of Contractor for the purpose of auditing or inspecting any aspect of performance under this Contract. The inspection and/or audit will be confined t o those matters connected with the performance of Contract including, but not limited to, the costs of administering the Contract. City will provide reasonable notice of such an audit or inspection. City reserves the right to audit and verify Contractor’s records before final payment is made.
Contractor agrees to maintain such records for possible audit for a minimum of three (3) years after final payment, unless a longer period of records retention is stipulated under this Contract or by law. Contractor agrees to allow interviews of any employees or others who might reasonably have information related to such records. Further, Contractor agrees to include a similar right to City to audit records and interview staff of any subcontractor related to performance of this Contract.
Should Contractor cease to exist as a legal entity, Contractor’s records pertaining to this Contract shall be forwarded to City’s Project Manager (as defined below).
BB. Contingency of Funds: Contractor acknowledges that funding or portions of funding for this Contract may be contingent upon budget approval for each fiscal year covered by this Contract. If such approval, funding or appropriations are not forthcoming, or are otherwise limited, City may immediately terminate or modify this Contract without penalty.
CC. California Public Records Act: Contractor and City agree and acknowledge that all information and documents related to the award and performance of this Contract may be subject to disclosure pursuant to the California Public Records Act, California Government Code S ection 7920.000 et seq. Contractor shall not respond to any California Public Records Act request directed at City; all responses shall be handled by City.
Additional Terms and Conditions:
1. Scope of Contract: This Contract specifies contractual terms and conditions by which City will procure the Deliverables from Contractor as further detailed in the Scope of Work and City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Specifications, identified and incorporated herein by this reference as Attachment A.
2. Term: The Term of this Contract commences on the Effective Date and continues through its first (1st) anniversary, unless earlier terminated under the provisions herein. Thereafter, the Term shall automatically extend for up to four (4) successive annual periods on each anniversary of the Effective Date, for a total Term of five (5) years, unless City gives written notice of nonrenewal prior to expiration of the then- current Term. Each initial and successive annual period is referred to as “Term Year.”
3. Adjustments – Scope of Work: No adjustments made to the Scope of Work and Specifications will be authorized without prior written approval of City’s Purchasing Agent or designee.
4. Bills and Liens: Contractor shall pay promptly all indebtedness for labor, materials and equipment used in performance of the work. Contractor shall not permit any lien or charge to attach to the work or the premises, but if any does so attach, Contractor shall promptly pr ocure its release and, in accordance with the requirements of Article I, section “Z” above, indemnify, defend, and hold City harmless and be responsible for payment of all costs, damages, penalties and expenses related to or arising from or related thereto.
5. Changes in Specifications: No changes shall be made in the specifications unless authorized by City. City shall have the right to make reasonable changes at any time, if no cost is associated with those changes, including drawings that are a part thereof or made a part thereof by re ason of the changes.
6. Civil Rights: Contractor attests that services provided shall be in accordance with the provisions of Title VI and Title VII of the Civil Rights Act of 1964, as amended, Section 504 of the Rehabilitation Act of 1973, as amended; the Age Discrimination Act of 1975 as amended; Title II of the Americans with Disabilities Act of 1990, and other applicable State and federal laws and regulations prohibiting discrimination on the basis of race, color, national origin, ethnic group identification, age, religion, marital status, sex or disability.
7. Americans with Disabilities Act (ADA): Section 504 of the Rehabilitation Act of 1973 as amended; Title VI and VII of the Civil Rights Act of 1964 as amended; Americans with Disabilities Act, 42 USC 12101; California Code of Regulations, Title 2, Title 22: California Government Code, Sections 11135, et seq; and other federal and state laws and executive orders prohibit discrimination. All programs, activities, employment opportunities, and services must be made available to all persons, including persons with disabilities.
8. Authorization Warranty: Contractor represents and warrants that the person executing this Contract on behalf of and for Contractor is an authorized agent who has actual authority to bind the Contractor to each and every term, condition and obligation of this Contract and that all requirements of Contractor have been fulfilled to provide such actual authority.
9. Breach of Contract: The failure of Contractor to comply with any of the provisions, covenants or conditions of this Contract shall be a material breach of this Contract. In such event City may, and in addition to any other remedies available at law, in equity, or otherwise specified in this Contract:
a. Terminate this Contract immediately, pursuant to Article I, section “K” herein; and
b. Afford Contractor written notice of the breach and ten (10) calendar days or such shorter time that may be specified in this Contract within which to cure the breach; and City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
c. Discontinue payment to Contactor for and during the period in which Contractor is in breach; and
d. Offset against any monies billed by Contractor but unpaid by City those monies disallowed pursuant to the above.
10. Conflict of Interest – Contractor’s Personnel: Contractor shall exercise reasonable care and diligence to prevent any actions or conditions that could result in a conflict with the best interests of City. This obligation shall apply to Contractor ; Contractor’s employees, agents, and subcontractors associated with accomplishing work and services hereunder. Contractor’s efforts shall include, but not be limited to establishing precautions to prevent its employees, agents, and subcontractors from providing or offering gifts, entertainment, payments, loans or other considerations which could be deemed to influence or appear to influence City staff or elected officers from acting in the best interests of City.
11. Conflict of Interest – City Personnel: City Council policy prohibits its employees from engaging in activities involving a conflict of interest. Contractor shall not, during the period of this Contract, employ any City employee for any purpose.
12. Contractor’s Project Manager and Key Personnel: Contractor shall appoint a Project Manager to direct Contractor ’s efforts in fulfilling Contractor’s obligations under this Contract (“Contractor’s Project Manager”). Contractor’s Project Manager shall be subject to approval by City and shall not be changed without the written consent of the Project Manager assigned by City to manage the goods and/or services contemplated under the Contract (“City’s Project Manager”), which consent shall not be unreasonably withheld.
Contractor’s Project Manager shall be assigned to this project for the duration of Contract and shall diligently pursue all goods and/or services to meet the project timelines. City’s Project Manager shall have the right to require the removal and replacement of Contractor’s Project Manager from providing services to City under this Contract. City’s Project Manager shall notify Contractor in writing of such action. Contractor shall accomplish the removal within five (5) business days after written notice b y City’s Project Manager. City ’s Project Manager shall review and approve the appointment of the replacement for Contractor’s Project Manager. City is not required to provide any additional information, reason or rationale in the event it requires the removal of Contractor’s Project Manager from providing further services under Contract.
13. Contractor’s Records: Contractor shall keep true and accurate accounts, records, books and data which shall correctly reflect the business transacted by Contractor in accordance with generally accepted accounting principles. These records shall be stored for a period of three ( 3) years after final payment is received from City.
14. Contractor Work Hours and Safety Standards: Contractor shall ensure compliance with all safety and hourly requirements for employees in accordance with federal, state, and City ’s safety regulations and laws.
15. Conditions Affecting Work: Contractor shall be responsible for taking all steps reasonably necessary to ascertain the nature and location of the work to be performed under this Contract and to know the general conditions which can affect the work or the cost thereof. Any failure by Contractor to do so will not relieve Contractor from responsibility for successfully performing the work without additional cost to City. City assumes no responsibility for any understanding or City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
representations concerning the nature, location(s) or general conditions made by any of its officers or agents prior to the execution of this Contract, unless such understanding or representations by City are expressly stated in Contract.
16. Data – Title To: All materials, documents, data or information obtained from City data files or any City medium furnished to Contractor in the performance of this Contract will at all times remain the property of City. Such data or information may not be used or copied for direct or indirect use by Contractor after completion or termination of this Contract without the express written consent of City. All materials, documents, data or information, including copies, must be returned to City at the end of this Contract.
17. Default – Re-Procurement Costs: In case of Contract breach by Contractor, resulting in termination by City, City may procure the commodities and services from other sources. If the cost for those commodities and services is higher than under the terms of the existing Contract, Contractor will be responsible for paying City the difference between Contract cost and the price paid, and City may deduct this cost from any unpaid balance due Contractor . The price paid by City shall be the prevailing market price at the time such purchase is made. This is in addition to any other remedies available under this Contract and under law.
18. Defective Materials: Any materials not conforming to the requirements of the s pecifications in Attachment A (Scope of Work and Specifications ) shall be considered defective. All such materials, whether in place or not, shall be immediately removed from the site of the work. Any defective materials delivered or installed shall be removed by City and all costs of removal and replacement shall be deducted from any amounts due or to become due do Contractor. No rejected materials, the defects of which have been subsequently corrected, shall be used.
19. Disputes – Contract: The Parties shall deal in good faith and attempt to resolve potential disputes informally. If the dispute concerning a question of fact arising under the terms of this Contract is not disposed of in a reasonable period of time by the Contractor’s Project Manager and the City‘s Project Manager, as specified in paragraph 27 “Notices” (below) of the Additional Terms and Conditions section of this Contract , such matter shall be brought t o the attention of the City Purchasing Agent by way of the following process:
a. Contractor shall submit to City’s Purchasing Agent a written demand for a final decision regarding the disposition of any dispute between the P arties arising under, related to, or involving this Contract, unless City , on its own initiative, has already rendered such a final decision.
b. Contractor’s written demand shall be fully supported by factual information, and, if such demand involves a cost adjustment to Contract, Contractor shall include with the demand a written statement signed by a senior official indicating that the demand is made in good faith, that the supporting data are accurate and complete, and that the amount requested accurately reflects Contract adjustment for which Contractor believes City is liable.
Pending the final resolution of any dispute arising under, related to, or involving this Contract, Contractor agrees to diligently proceed with the performance of this Contract, including the delivery of commodities and/or provision of services. Contractor ’s failure to diligently proceed shall be considered a material breach of this Contract.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Any final decision of City shall be expressly identified as such, shall be in writing, and shall be signed by City’s Purchasing Agent or his designee. If City fails to render a decision within 90 days after receipt of Contractor’s demand, it shall be deemed a final decision adverse to Contractor’s contentions. Nothing in this section shall be construed as affecting City’s right to terminate Contract for cause or termination for convenience as stated in Article I, section K herein.
20. Drug-Free Workplace: Contractor hereby certifies compliance with Government Code s ection 8355 and City’s drug-free workplace Administrative Regulation (“AR”) 217 to ensure compliance with the Drug Free Workplace Act of 1988 (collectively, the “Drug- Free Regulations”). City, its employees, and agents, are subject to the provisions of the Drug- Free Policies since City is a recipient of state and federal grant monies at the present time, and may be in the future. It is City’s policy to provide a drug free workplace for all employees and agents. The manufacture, distribution, dispensation, possession, or use of a controlled substance on City property or time is expressly prohibited. In furtherance of the Drug-Free Regulations, Contractor will:
a. Review and comply with the procedures set forth in AR 127.
b. Publish a statement notifying employees that unlawful manufacture, distribution, dispensation, possession, or use of a controlled substance is prohibited and specifying actions to be taken against employees for violations, as required by Government Code Section 8355(a)(1).
c. Establish a drug -free awareness program as required by Government Code Section 8355(a)(2) to inform employees about all of the following:
i. The dangers of drug abuse in the workplace; and
ii. The organization’s policy of maintaining a drug-free workplace; and iii. Any available counseling, rehabilitation and employee assistance programs; and iv. Penalties that may be imposed upon employees for drug abuse violations. d. Provide as required by Government Code Section 8355(a)(3) that every employee who works under this Contract:
i. Will receive a copy of the company’s drug-free policy statement; and ii. Will agree to abide by the terms of the company’s statement as a condition of employment under this Contract.
e. Failure to comply with these requirements may result in suspension of payments under Contract or termination of Contract or both, and Contractor may be ineligible for award of any future City contracts if City determines that any of the following has occurred:
i. Contractor has made false certification, or
ii. Contractor violates the certification by failing to carry out the requirements as noted above.
21. Emergency/Declared Disaster Requirements: In the event of an emergency or if the City of Anaheim is declared a disaster area by city, county, state or federal government, Contract may be subjected to unusual usage. Contractor shall service City during such an emergency or declared City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
disaster under the same terms and conditions that apply during non-emergency/disaster conditions.
The pricing quoted by Contractor shall apply to serving City ’s needs regardless of the circumstances. If Contractor is unable to supply the goods/services under the terms of the Contract, then Contractor shall provide proof of such disruption and a copy of the invoice for the goods/services from Contractor’s supplier(s). Additional profit margin as a result of supplying goods/services during an emergency or a declared disaster shall not be permitted. In the event of an emergency or declared disaster, emergency purchase order numbers will be assigned. All applicable invoices from Contractor shall show both the emergency purchase order number and Contract number.
22. Errors and Omissions : All reports, files and other documents prepared and submitted by Contractor shall be complete and shall be carefully checked by the professional(s) identified by Contractor as Contractor’s Project Manager and key personnel attached hereto, prior to submission to City. Contractor agrees that City review is discretionary, and Contractor shall not assume that City will discover errors and/or omissions. If City discovers any errors or omissions prior to approving Contractor’s reports, files and other written documents, the reports, files or documents will be returned to Contractor for correction. Should City or others discover errors or omissions in the reports, files or other written documents submitted by Contractor after City approval thereof, City approval of Contractor’s reports, files or documents shall not be used as a defense by Contractor in any action between City and Contractor, and the reports, files or documents will be returned to Contractor for correction.
23. Equal Employment Opportunity: Contractor shall comply with U.S. Executive Order 11246 entitled, “Equal Employment Opportunity” as amended by Executive Order 11375 and as supplemented in Department of Labor regulations (41 CFR, Part 60) and applicable state of California regulations as may now ex ist or be amended in the future. Contractor shall not discriminate against any employee or applicant for employment on the basis of race, color, national origin, ancestry, religion, sex, marital status, political affiliation or physical or mental condition.
Regarding handicapped persons, Contractor will not discriminate against any employee or applicant for employment because of physical or mental handicap in regard to any position for which the employee or applicant for employment is qualified. Contractor agrees to provide equal opportunity to handicapped persons in employment or in advancement in employment or otherwise treat qualified handicapped individuals without discrimination based upon their physical or mental handicaps in all employment practices such as the following: employment, upgrading, promotions, transfers, recruitments, advertising, layoffs, terminations, rate of pay or other forms of compensation, and selection for training, including apprenticeship. Contractor agrees to comply with the provisions of Sections 503 and 504 of the Rehabilitation Act of 1973, as amended, pertaining to prohibition of discrimination against qualified handicapped persons in all programs and/or activities as detailed in regulations signed by the Secretary of the Department of Health and Human Services effective June 3, 1977, and found in the Federal Register, Volume 42, No. 68 dated May 4, 1977, as may now exist or be amended in the future.
Regarding Americans with disabilities, Contractor agrees to comply with applicable provisions of Title 1 of the Americans with Disabilities Act enacted in 1990 as may now exist or be amended in the future.
24. Headings: The various headings and numbers herein, the grouping of provisions of this Contract into separate clauses and paragraphs, and the organization hereof are for the purpose of convenience only and shall not limit or otherwise affect the meaning hereof.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
25. Liquidated Damages: In the event the Contractor fails to deliver the services or any portion thereof by the delivery dates specified in the Contract or any agreed-upon amendment, the Contractor may be liable for liquidated damages. Such damages shall be calculated as follows:
a. A charge of $1,000 per day for each day beyond the agreed delivery date for each unit of equipment or scheduled service that is delayed. This amount reflects a reasonable estimate of the City’s damages due to such delay, including but not limited to administrative costs, project impacts, and the potential need to procure alternate equipment or services.
Liquidated damages shall not exceed 5% of the invoiced value of the delayed equipment.
26. News/Information Release: Contractor agrees that it will not issue any news releases in connection with either the award of this Contract or any subsequent amendment of or effort under this Contract without first obtaining review and written approval of said news releases from City through City’s Project Manager.
27. Notices: Any and all notices, requests, demands, and other communications contemplated, called for, permitted, or required to be given hereunder shall be in writing with a copy provided to City’s Assigned Buyer (“Assigned Buyer”), except through the course of the Parties’ Project Managers’ routine exchange of information and cooperation during the terms of the work and services. Any written communications shall be deemed to have been duly given upon actual in -person delivery, if delivery is by direct hand, or upon delivery on the a ctual day of receipt or no greater than four (4) calendar days after being mailed by US certified or registered mail, return receipt requested, postage prepaid, whichever occurs first. The date of mailing shall count as the first day. All communications shall be addressed to the appropriate P arty at the address stated herein or such other address as the Parties hereto may designate by written notice from time to time in the manner aforesaid.
Contractor: OneSource Supply Solutions, LLC
Attn: Lora Jones
9820 Willow Creek Road Suite #150
San Diego, CA 92131
Telephone: 858-775-7876
Email: [email protected]
APU: Anaheim Public Utilities
Attn: Lem Reyes
201 S. Anaheim Blvd.
Anaheim, CA 92805
Telephone: 714-765-5020
Email: lreyes2@anaheim. net
Copy to: City of Anaheim – City Clerk
200 S. Anaheim Blvd., 2nd Floor
Anaheim, CA 92805
28. Order Dates: Orders may be placed during the term of the Contract even if delivery may not be made until after the term of the Contract. Contractor must clearly identify the order date on all invoices to City and the order date must precede the expiration date of the Contract.
29. Ownership of Documents: City has permanent ownership of all directly connected and derivative materials produced under this Contract by Contractor. All documents, reports and other incidental City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
or derivative work or materials furnished hereunder shall become and remain the sole property of City and may be used by City as it may require without additional cost to City . None of the documents, reports and other incidental or derivative work or furnished materials shall be used by the Contractor without the express written consent of City.
30. Permits and Licenses: Contractor shall be required to obtain any and all approvals, permits and/or licenses which may be required in connection with the permitted operation as set out herein. No permit approval or consent given hereunder by City in its governmental capacity shall affect or limit Contractor’s obligations hereunder, nor shall any approvals or consents given by City as a party to this Contract, be deemed approval as to compliance or conformance with applicable governmental codes, laws, ordinances, rules, or regulations.
31. Precedence: Contract documents consist of this Contract and its exhibits and attachments. In the event of a conflict between or among Contract documents, the order of precedence shall be the provisions of the main body of this Contract, i.e., those provisions set forth in the recitals and article(s), and paragraphs of this Contract, and then the exhibits and attachments.
32. Prevailing Wage (as applicable):
a. By executing this Agreement, Contractor certifies that it is aware of the requirements of California Labor Code sections 1720 et seq. and 1770 et seq., as well as California Code of Regulations, Title 8, section 16000 et seq. (“ Prevailing Wage Laws”), which require the payment of prevailing wage rates and the performance of other requirements on certain “public works” and “maintenance” projects. To the extent applicable, Contractor agrees to fully comply with such Prevailing Wage Laws in the performance of the Services. The prevailing rates of per diem wages are available at:
http://www.dir.ca.gov/dlsr/DPreWageDetermination.htm.
Contractor shall make copies of the prevailing rates of per diem wages for each craft, classification, or type of worker needed to execute the Services available to interested parties upon request and shall post copies at Contractor’s principal place of business and at the project site.
b. Contractor shall pay all workers pursuant to the Prevailing Wage Laws and not less than the prevailing wage rates as determined by the Director of Industrial Relations in accordance with the provisions of the Labor Code. As provided in Labor Code section 1775, if Contractor violates the foregoing, Contractor shall forfeit, as a penalty to City, fifty dollars ($50) for each calendar day or portion thereof for each workman paid less than the stipulated prevailing wage rate for such work or craft in which such workman is employed, for any service subject to the Prevailing Wage Laws. In addition to said penalty and pursuant to said section 1775, the difference between such stipulated prevailing wage rates and the amount paid to each workman shall be paid to each workman by Contractor, as applicable.
c. Contractor shall strictly adhere to the provisions of the Labor Code, including sections 1810 through 1813 and 1815, regarding minimum wages, the 8- hour day, the 40- hour week, overtime, Saturday, Sunday, and holiday work. Contractor shall forfeit to City t he penalties prescribed in the Labor Code for noncompliance, including the penalties set forth in section 1813 for violations of sections 1810 through 1815.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
d. Contractor shall comply with the provisions of Labor Code sections 1777.5 and 1777.6 and Title 8, sections 200 et seq. of the California Code of Regulations relating to apprentice employment and training. Contractor shall assume full responsibility for compliance with said sections with respect to all apprenticeable occupations providing services. In the event of noncompliance by Contractor, City shall withhold the penalties provided for under section 1777.7 of the Labor Code from payments then due.
e. Pursuant to the requirements of section 1860 of the Labor Code, Contractor will be required to secure the payment of workers’ compensation to its employees in accordance with the provisions of section 3700 of the Labor Code.
f. City will not recognize any claim for additional compensation because of the payment by Contractor of any wage rate in excess of the prevailing wage rate effective on the Effective Date. The possibility of prevailing wage increases is one of the elements to be considered by Contractor at the time of the proposal submission and will not, under any circumstances, be considered as the basis of a claim against City for additional compensation. g. Contractor shall maintain accurate payroll records in accordance with the provisions of Labor Code section 1776 and shall, upon request, file said records with City. h. Contractor shall forfeit as a penalty to City twenty five dollars ($25) for each calendar day during which Contractor’s employee subject to the Prevailing Wage Laws is required or permitted to work more than eight (8) hours in any one calendar day and forty (40) hours in any one calendar week, in violation of the provisions of the Labor Code and, in particular, section 1810 to section 1815 thereof, inclusive, except that the services performed by the employees of Contractor in excess of eight (8) hours per day and forty (40) hours during any one week shall be permitted upon compensation of all hours worked in excess of eight (8) hours per day at not less than one and one-half times the basic rate of pay as provided in section 1815.
i. Contractor shall defend, indemnify, and hold City and City Indemnities, free and harmless from any claims, liabilities, costs, penalties, or interest arising out of any failure or alleged failure by Contractor or its employees, agents, contractors, and subcontractors to comply with the Prevailing Wage Laws.
33. Receiving and Inspection: Deficient parts will be rejected, and Contractor will be required to make the necessary adjustments or replacements. It shall be Contractor’s responsibility to pick up any rejected parts, make the necessary corrections, and deliver materials at no additional cost to City.
34. Substitutions: Contractor is required to meet all specifications and requirements contained herein.
No substitutions will be accepted without prior City written approval.
35. Usage: No guarantee is given by City to Contractor regarding usage of this Contract. Usage figures, if provided, are approximations. Contractor agrees to supply services and/or commodities requested, as needed by City of Anaheim, at rates/prices listed in Contract , regardless of quantity requested.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
36. Usage Reports: Contractor shall submit usage reports on an annual basis to the A ssigned Buyer.
The usage report shall be in a format specified by City and shall be submitted 90 days prior to the expiration date of Contract term, or any subsequent renewal term, if applicable
[CONTRACT SIGNATURE PAGE TO FOLLOW]
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
CONTRACT SIGNATURE PAGE
IN WITNESS WHEREOF, the Parties hereto have executed this Contract on the date following their respective signatures.
DATE OF EXECUTION:
CITY OF ANAHEIM
a California municipal corporation
By:
DATE OF EXECUTION:
OneSource Supply Solutions, LLC
a Delaware limited liability company
By:
Lora Jones, CEO
ATTEST:
By:
THERESA BASS, CITY CLERK
APPROVED AS TO FORM:
ROBERT FABELA, CITY ATTORNEY
By:
Title: Deputy City Attorney
Printed Name: Gloria V. Ramirez
(158484)
-------------------------------------
* If the contracting party is a corporation, (2) two signatures are required: one (1) signature by the Chairman of the Board, the President or any Vice President; and one (1) signature by the Secretary, any Assistant Secretary, the Chief Financial Officer or any Assistant Treasurer. The signature of one person alone is sufficient to bind a corporation, as long as he or she holds corporate offices in each of the two categories described above. For City purposes, proof of such dual office holding will be s atisfied by having the individual sign the instrument twice, each time indicating his or her office that qualifies under the above- described provision. In the alternative, a single corporate signature is acceptable when accompanied by a corporate resolution demonstrating the legal authority of the signee to bind the corporation.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
ATTACHMENT A
SCOPE OF WORK AND SPECIFICATIONS
1. Scope of Work
Contractor shall provide underground electrical components, including connectors, receptacles, fuses, and splices, for use in the City's utility underground distribution system.
All materials provided under this Contract shall:
• Comply with applicable U.S. federal and state standards for utility environments • Meet or exceed related IEEE, ANSI, and ISO 9001 quality and performance requirements • Be tested and certified by U.S.-accredited laboratories to verify compliance with these standards
Contractor shall ensure all components are fit for utility use, fully compliant with specifications, and supported by valid test documentation and certifications.
2. Quantities
Quantities referenced herein are estimated annual amounts. City reserves the right to order additional or fewer quantities than the estimated annual amount at the agreed-upon unit prices.
3. Replacement or Updated Products
If a product identified by a specific stock number or SKU is discontinued or replaced by the manufacturer, Contractor may offer a substantially equivalent substitute, subject to City's prior written approval. The substitute must be comparable in quality and functionality and shall not represent a materially different product requiring new competitive solicitation. Pricing for any approved substitute shall follow the same pricing structure and may not be materially higher than the original contract price, except to reflect documented manufacturer pricing changes.
4. Orders
• Contractor shall not hold items to consolidate orders unless specifically authorized by the City Representative
• Contractor shall not backorder items unless specifically authorized by the City Representative
5. Packaging
Contractor shall pack all items to ensure safe handling and transport from the point of origin through transit, delivery, offloading, and storage. All packing materials and packaging must be appropriate for the items being shipped.
6. Production Schedule (BTO OR MTO ITEMS)
For build-to-order ("BTO") or make-to-order ("MTO") items, Contractor shall:
• Provide the City with a preliminary production and delivery schedule with milestone activities and estimated timelines prior to commencing production
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
• Obtain the City Representative's written concurrence prior to ordering materials and beginning production
• Provide regular schedule updates and notify the City Representative as milestones approach or if any delays are anticipated
7. Delivery Schedule (BTO OR MTO ITEMS)
Contractor shall deliver and offload BTO or MTO items within 21 calendar days after manufacturing has been completed, unless otherwise agreed upon in writing with the City Representative.
8. Delivery Schedule (NON-BTO OR MTO ITEMS)
Contractor shall make deliveries within the quoted lead time after the receipt of an order.
9. Delivery Location
Primary Location: Public Utilities Warehouse: Anaheim, CA 92805 Notification: Call 714-765-6819 at least 24 hours prior to deliveries.
Delivery hours: Mon–Fri; 7:30am to 2:30pm, closed 11:30am to 12:30pm.
Include FOB Anaheim, CA delivery costs in the unit prices; no exceptions.
10. Rejections and Pickups
Note that the City reserves the right to reject items that fail to comply with Specifications, are damaged, or are in excess of ordered quantities.
Pick up items to be returned to vendor within five business days of notification and process credit for returned items within ten business days of receipt.
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
ATTACHMENT B
PRICNG, PAYMENT AND COMPENSATION
1. Compensation: This is a fixed fee Contract between City and Contractor for Electrical Connectors, Fuses and Other Component s as set forth in Atta chment A, “ Scope of Work and Specifications.”
Contractor agrees to accept the specified compensation as set forth as the Contract Amount as full payment for performing all services and furnishing all staffing and materials required, for any reasonably unforeseen difficulties which may arise or be encountered in the execution of the services until acceptance, for risks connected with the services, and for performance by Contractor of all its duties and obligations hereunder. Contractor shall only be compensated as set forth herein for equipment, supplies, and accessories provided in accordance with the Scope of Work. City shall have no obl igation to pay any sum in excess of the fixed rates specified herein unless authorized by amendment in accordance with Article I, sections “C” (Amendment) and “P” (Changes), of the City’s General Terms and Conditions.
2. Contract Amount: Compensation for the Deliverables contemplated herein shall not exceed five million, six hundred thousand dollars and 00/100 cents ($5,600,000.00) for the Term of the Contract.
3. Annual Price Adjustments: No more than twice per calendar year, and only during the months of June and November, Contractor may submit a written request for price adjustments for Products listed in Attachment B for the subsequent calendar year . Any requested adjustment for non- S&C items shall be based solely on the Consumer Price Index for All Urban Consumers (CPI -U) (CPIAUCSL). Any requested adjustment for S&C items shall be based solely on the Composite Index, which is weighted as follows: 20% CPI -U, 20% labor, and 60% Producer Pr ice Index for Electrical Equipment Manufacturing (PCU3353133531). All price adjustment requests - whether for S&C or non- S&C Products - must be submitted together in a single submission for review.
Contractor shall provide written documentation supporting any requested adjustment no later than the last business day of the applicable submission month, including the applicable index values, base period values, detailed calculations, and identificatio n of affected Products. Any price adjustment shall be subject to City's review and prior written approval, in City's sole discretion, and shall not take effect unless and until approved in writing by the City. No adjustment shall be deemed approved by the passage of time. Approved adjustments, if any, shall apply prospectively only to Products shipped on or after the first day of the following calendar month. Adjustments may result in either an increase or a decrease in pricing depending on index movement. If the applicable index does not support an adjustment, or if Contractor fails to timely submit adequate supporting documentation, pricing shall remain unchanged.
4. Pricing List: Fees quoted below shall be all inclusive of all labor, services, skills, supervision, delivery, mileage, fuel surcharge, travel time, materials, necessary tools, routine equipment and for any unreasonably unforeseen difficulties which may arise or be encountered in the execution of the services until acceptance, for risks connected with the services, and for performance by Contractor of all its duties and obligations hereunder.
[CONTINUED ON FOLLOWING PAGE]
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
1 E504195M
CONNECTOR, URD, BOOT
ONLY FOR 250-750 KCMIL,
AL/CUMFG: (1) HOMAC
SCH-4596 VENDORS: ONE
SOURCE - MA 490171
10 Each HOMAC $10.00 8 WEEKS
2 E504230M
CONNECTOR, PMT SEC 6
POS, , SPADEMOUNT, TYPE
USG-2, FOR 6 #1/0 TO 750
AL/CU CONDUCTORS,
DOUBLE SOCKET SET
SCREWS, HIGH-STRENGTH
ALUM ALLOY 6061-T6,
NEMA DRILLED (10
HOLES) FOR 1/2"
MOUNTING BOLTS,
INCLUDE INHIBITOR
COMPOUND. (STD
CARTON IS 4)MFG:
UTILCO, # USG2-750R106-
PVENDORS: ANIXTER;
WESCO; ONE SOURCE
112 Each UTILCO $49.83 8 WEEKS
3 E490295M
SPLICE, TUBE
HEATSHRINK,,1.5"
DIAMETER -- RAYCHEM
ELECTRIC POWER
PRODUCTS HEAVY WALL
HEAT SHRINK TUBING
WITH GENERAL USE
RANGE OF 0.50" TO 1.55"
DIA., UNCOATED, IN 50'
LENGTH ROLL. (FITS
1000V INSUL. CONDUCTOR
SIZE 1/0-400
AWG/KCMIL)MFG:
RAYCHEM #WCSM-43/12-
A/UVENDORS: ANIXTER;
ONE SOURCE;
WESCOLAST UPDATE:
JULY 5, 2005
10 Each TE/RAYCHEM $6.96 2 WEEKS
4 E556796E
FUSE, 100 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 1500 KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4038361C04CBVENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
10 Each EATON/CPS $179.95 18 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
5 E552180M
CONNECTOR, LUG, SINGLE
SCREW FOR #4 TO 400
MCM AL/COPPER
CONDUCTOR, ELECTRO
TIN PLATED, MADE OF
6061-T6 ALUMINUM
ALLOY, ALL PURPOSE
MFG: HOMAC #A-600;
ILSCO #TA-500VENDORS:
HOMAC; ANIXTER; ONE
SOURCE
42 Each HOMAC $69.44 42 WEEKS
6 E556340E
FUSE,LINK SLO-FAST 46
AMP, FUSE LINK WITH
REMOVABLE HEAD WITH
TWO SLOW AND FAST
SECTIONS. MFG: CHANCE
#M46SFA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $13.61 18 WEEKS
7 E556646M
FUSE TEST, X-LMTR END
FITTINGS, TWO PIECES
FOR COOPER POWER X-
LIMITER FUSE TESTING
DEVICE INSTALLATION IN
S&C SMD-20 FUSE
HOLDER. MFG: (1) S&C
MODEL #3095 VENDORS:
ONE SOURCE;
ANIXTERLAST UPDATE:
JULY 5, 2014
11 Each S&C $162.16 22 WEEKS
8 E556680M
FUSE, NXC, 65 AMP FOR
300KVAR PAD CAPACITOR,
OUTDOOR UNITMFG:
COOPER
#FA5J65VENDORS:
ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each EATON/CPS $821.09 36 WEEKS
9 E490245M
SPLICE, 69KV,
HEATSHRINK W/O
CONNECTOR, RAYCHEM
69KV HEATSHRINK
SPLICE, 2000KCMIL, AL OR
COPPER CABLE WITH NO
CONNECTORS, FOR
NOKIA, CANADA WIRE,
ABB & FUJI 69KV
CABLE.MFG: RAYCHEM
#EHVS-6923-WVENDORS:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
APRIL 11, 2006
10 Each TE/RAYCHEM $4,311.79 14 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
10 E436215M
SPLICE, COMPRESSION
FOR 4/0 STRANDED
COPPER, WITH OIL
STOPMFG: (1) DOSSERT
#DPCP-21; (2) TELEDYNE
PENN UNION #BCU-4/0-P
(3) BURNDY
#YSP28TVENDORS:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
AUGUST 10, 2006 -AA
25 Each BURNDY $9.16 2 WEEKS
11 E556325E
FUSE,LINK SLO-FAST 14
AMP, FUSE LINK WITH
REMOVABLE HEAD WITH
TWO SLOW AND FAST
SECTIONS. (STD PKG
10)MFG: CHANCE
#M14SFA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JANUARY 13, 2006
10 Each HPS/CHANCE $14.13 12 WEEKS
12 E556965E
FUSE, SOLID LINK, SM-4
(PMC), S&C "SWITCH
BLADE" FOR USE IN LIEU
OF SML-4Z HOLDER IN
SML-4 MOUNTING, 14.4
KV, 200 AMP
CONTINUOUS. (FOR USE IN
S&C "PMH" PADMOUNTED
SWITCH CABINETS)MFG:
S&C #5442VENDORS:
ANIXTER; ONE SOURCE;
WESCOLAST UPDATE:
APRIL 10, 2006
10 Each S&C $1,129.73 22 WEEKS
13 E556908M
FUSE, 200E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612200LAST UPDATED:
AUGUST, 2025 - MLI
18 Each S&C $183.78 22 WEEKS
14 E494305M
CONN
STEM,COMPRESSION 750
KCMIL AL/CUMFG:
HOMAC PTL-750-
10TNVENDORS: ONE
SOURCE - MA 490171
10 Each HOMAC $101.72 8 WEEKS
15 E552230E
CONNECTOR, SERVICE
CONNECTOR, "BLUE" 4
SOLID TO GREEN 6 SOLID,
8 STRAND MFG: (1)
HOMAC #UBG 8 (2)
BURNDY #ES4W6W ***
ORDER IN BXS OF 100
EACH *** -- NO
40 Each BURNDY $.74 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
SUBSTITUTIONS --
VENDORS: HOMAC C/O
MATZINGER-KEEGAN;
ANIXTER
16 E556950E
FUSE, 200E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE, FITS
IN SMD-20 MOUNTINGS
FOR OUTDOOR
DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712200VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
17 E490386M
SPLICE,SECONDARY, #2-
500 KCMIL, 4-3/16 INCH
LONG, UNDERGROUND
CABLE, FOR #2-500 KCMIL
ALUMINUM SECONDARY
CABLES, WITH TWO SET
SCREW CONNECTORS
AND EPDM FLOOD-SEAL
SLEEVES.MFG: HOMAC
#USK-500VENDORS: ONE
SOURCE - MA 480043LAST
UPDATE: SEPTEMBER 2016
10 Each HOMAC $66.87 3 WEEKS
18 E552005M
CONN SPLIT BOLT #4/0-
250MCM, -- MFG: BURNDY
#KSU-29, PENN-UNION SW-
10, ANDERSON SQD CPS-
4/0VENDORS: ANIXTER;
ONE SOURCE
10 Each BURNDY $26.89 8 WEEKS
19 E552150M
CONN #2,7 STRAND, ALL
PURPOSE, SPLIT BOLT,
MFG: (1) BURNDY -
#KSU23, (2) PENN UNION -
#SW6VENDORS:
GRAYBAR; ANIXTER; B&K
ELECTRIC
42 Each BURNDY $2.88 3 WEEKS
20 E556945E
FUSE, 150E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE FITS IN
SMD-20 MOUNTINGS FOR
OUTDOOR DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712150VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
21 E556215E
FUSE, 10AMP, 250V,
13/32"X1.5" DUAL
ELEMENT AND TIME
DELAY FOR STREET LIGHT
APPLICATIONMFG:
BUSSMAN
#FNM10VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
245 Each EATON/BUSSM
ANN $6.29 6 WEEKS
22 E552470M
CONNECTOR MINIWEDGE
FOR SECONDARY WIRES,
#4 ACSR/ CU - #6 ACSR
/CUORDER ONE
MINIWEDGE TAP COVER ,
STORE ROOM ITEM 552505
WITH EACH MINIWEDGE
CONNECTOR MFG: (1)
AMPACT - TYCOPART
NUMBER 83592-9NO
SPECIAL TOOLS
NEEDED*** STD BOX OF
100 EACH ***NO
SUBSTITUTIONS***VENDO
RS: ANIXTER
10 Each AMPACT $4.26 24 WEEKS
23 E552455M
CONNECTOR MINIWEDGE
FOR SECONDARY WIRES,
1/0 ACSR / CU - #4 ACSR /
CUORDER ONE
MINIWEDGE TAP COVER ,
STORE ROOM ITEM 552505
WITH EACH MINIWEDGE
CONNECTOR MFG: (1)
AMPACT - TYCOPART
NUMBER 83592-3 NO
SPECIAL TOOL NEEDED***
STD BOX OF 100 EACH
***NO
SUBSTITUTIONS***VENDO
RS: ANIXTER
10 Each AMPACT $4.26 14 WEEKS
24 E552460M
CONNECTOR MINIWEDGE
FOR SECONDARY WIRES,
#4 ACSR - #10, 12 &14
AL/CUORDER ONE
MINIWEDGE TAP COVER ,
STORE ROOM ITEM 552505
WITH EACH MINIWEDGE
CONNECTOR MFG: (1)
AMPACT - TYCOPART
NUMBER 83630-5 NO
SPECIAL TOOLS
NEEDED*** STD BOX OF
100 EACH ***NO
SUBSTITUTIONS***VENDO
RS: ANIXTER
10 Each AMPACT $4.42 24 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
25 E552465M
CONNECTOR MINIWEDGE
FOR SECONDARY WIRES,
#4 ACSR/ CU - #8 AL
/CUORDER ONE
MINIWEDGE TAP COVER ,
STORE ROOM ITEM 552505
WITH EACH MINIWEDGE
CONNECTOR MFG: (1)
AMPACT - TYCOPART
NUMBER 83630-6NO
SPECIAL TOOLS
NEEDED*** STD BOX OF
100 EACH ***NO
SUBSTITUTIONS***VENDO
RS: ANIXTER
10 Each AMPACT $4.42 22 WEEKS
26 E552175M
CONNECTOR, TAP LUG
2/0-1000MCM 4-AL/CU,
BRONZE&TIN PLATED,
MFG: (1) ANDERSON # TLS-
89-L-TP, (2) PENN UNION #
LSN-100NE-TNVENDORS:
ANIXTER
10 Each HPS/ANDERSO
N $43.43 10 WEEKS
27 E556935E
FUSE, 100E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE, FITS
IN SMD-20 MOUNTINGS
FOR OUTDOOR
DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712100VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
15 Each S&C $183.78 22 WEEKS
28 E490365M
SPLICE SECONDARY #250-
750 MCM -- SPLICE
DIRECT BURIAL SET
SCREW, BAR CONNECTOR,
2-WIRE KIT FOR CABLE
RANGE 250 MCM TO 750
MCM.MFG: HOMAC #USK-
750VENDORS: ONE
SOURCE - MA 490171LAST
UPDATE: OCTOBER 4TH,
2016 - LR
12 Each HOMAC $76.31 10 WEEKS
29 E490285M
SPLICE, TAPE H.V. INSUL.,
RUBBER SPLICING TAPE,
1" WIDE X 30' LONG ROLL
MFG: 3M SCOTCH
#23VENDORS: ANIXTER;
ONE SOURCE;
WESCOLAST UPDATE:
JULY 5, 2005
10 Each 3M $14.21 12 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
30 E556690M
FUSE, 20AMP, 250V, 13/32"
X 1.5" DUAL ELEMENT
AND TIME DELAY FOR
STREET LIGHT
APPLICATIONMFG: (1)
BUSSMAN #FNM20; (2)
LITTLE FUSE
#FLM20VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATE: OCTOBER, 2025 -
MLI
243 Each EATON/BUSSM
ANN $6.22 2 WEEKS
31 E556475E
FUSE,LINK SLO-FAST 3.1
AMP, MFG: CHANCE
#M3D1SFA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $14.68 18 WEEKS
32 E552090M
CONNECTOR, SINGLE
BOLT, #4 ACSR #1 (MIN
ORDER OF 250)MFG:
FARGO/HUBBELL #GA
9003GL -- NO
SUBSTITUTIONS-
VENDORS: ANIXTER; ONE
SOURCE
34 Each HPS/FARGO $10.56 8 WEEKS
33 E556695M
FUSE, 30 AMP, 250V, 13/32"
X 1.5" DUAL ELEMENT
AND TIME DELAY FOR
STREET LIGHT
APPLICATIONMFG: (1)
BUSSMAN #FNM30; (2)
LITTLE FUSE
#FLM30VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATE: OCTOBER, 2025 -
MLI
960 Each EATON/BUSSM
AN $6.22 4 WEEKS
34 E552270E
CONNECTOR, SERVICE
CONNECTOR "RED" 1
SOLID TO" BLUE" 4 SOLID
&5&6 STRANDED MFG: (1)
HOMAC #URB 26 (2)
BURNDY #ES2R4W.60 ***
ORDER IN BXS OF 100
EACH ***NO
SUBSTITUTIONS***VENDO
RS: HOMAC; ANIXTER
55 Each BURNDY $.74 8 WEEKS
35 E556220E
FUSE, 15AMP, 250V, 13/32"
X 1.5" DUAL ELEMENT
AND TIME DELAY FOR
STREET LIGHT
APPLICATIONMFG: (1)
BUSSMAN #FNM15; (2)
LITTLE FUSE
#FLM15VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: OCTOBER, 2025
- MLI
340 Each EATON/BUSSM
ANN $6.11 2 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
36 E436050M
SPLICE COMPRESSION #4
ACSR (MIN ORDER OF
100)MFG: KEARNEY OH4-
61-71ASVENDORS:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
APRIL 11, 2006
10 Each EATON/KEARN
Y $18.67 20 WEEKS
37 E552160M
CONN SPLIT BOLT #2/0
STRANDED ALL
PURP,MFG: (1) BURNDY -
#KSU26, (2) PENN UNION -
#SW8 VENDORS: GESCO;
WESCO
10 Each BURNDY $4.83 3 WEEKS
38 E556940E
FUSE, 125E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE FITS IN
SMD-20 MOUNTINGS FOR
OUTDOOR DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712125VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
39 E556947E
FUSE, 175E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE FITS IN
SMD-20 MOUNTINGS FOR
OUTDOOR DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712175VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
40 E436055M
SPLICE CMP #2 ACSR-
SINGLE TENSION
SLEEVESMFG: KEARNY
OH2-61-71ASVENDOR:
ANIXTER; WESCO;
ONESOURCELAST
UPDATE: MAY 7, 2008
10 Each EATON/KEARN
Y $21.26 20 WEEKS
41 E556430E
FUSE,K-LINK 140K AMP,
MFG: CHANCE
#M140KA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $22.80 8 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
42 E490305S
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR 1000
KCMIL, COPPER
STRANDED CONDUCTOR,
175 MIL INSULATION,
JACKETED CONCENTRIC
NEUTRAL CABLE, WITH
CONNECTORSMANUFACT
URER: 3M, PART NUMBER:
5418A-WG-1000-
CUMANUFACTURER:
ELASTIMOLD, PART
NUMBER: 15PCJ1N2410,
LUG NO.:
0380241PVENDORS: ONE
SOURCE - MA 480378LAST
UPDATE: MARCH 1, 2016
3 Each ELASTIMOLD $309.39 24 WEEKS
43 E552075M
CONNECTOR, TAPPIT, 8-
1/0, PARALLEL, PRE-
GREASED GR V LOV. ***
MUST BE PRE-GREASED
*** MFG: (1) ANDERSON
#LC-51-C-XB (2) BURNDY
#UCG25RS -- NO
SUBSTITUTIONS --
VENDORS: ANIXTER;
WESCO; ONE SOURCE
12826 Each BURNDY $3.54 2 WEEKS
44 E556905E
FUSE, 125E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612125VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
20 Each S&C $183.78 22 WEEKS
45 E490015M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR 750
KCMIL, ALUMINUM
STRANDED CONDUCTOR,
175 MIL INSULATION,
JACKETED CONCENTRIC
NEUTRAL CABLE, WITH
CONNECTORSMANUFACT
URER: 3M #5418A-WG-750-
AL, ELASTIMOLD
#15PCJ1M1380, TE #CSJA-
JCN/EG-1514M9VENDOR:
G.E. SUPPLY, 1-SOURCE,
ANIXTER, WESCOLAST
UPDATE: 4-15-14, MH
10 Each ELASTIMOLD $110.15 16 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
46 E552275E
CONNECTOR, SERVICE
CONNECTOR "RED' 1
SOLID TO "GREEN" 6
SOLID & 8 STR
ANDEDMFG: (1) HOMAC
#URG 28 (2) BURNDY
#ES2R6W.60 *** ORDER IN
BXS OF 100 EACH ***NO
SUBSTITUTIONS***
VENDORS: HOMAC;
ANIXTER
10 Each BURNDY $.74 3 WEEKS
47 E556500E
FUSE, K-LINK, 6 AMPS
MFG: (1) CHANCE
#M6KA23 VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $4.72 8 WEEKS
48 E552440M
--CHECK WITH
STANDRADS PRIOR TO
ORDERING--CONN
STIRRUP, 336ACSR - 1/0
BAIL -- AMPACT STIRRUP
CONNECTOR FOR 336 (18/3)
ACSR WIRE TAP WITH 1/0
BAIL. USE YELLOW
CARTRIDGE FOR
CONNECTION. (STD BOX
OF 20)MFG: AMPACT
#600474VENDORS:
ANIXTER
10 Each AMPACT $67.60 14 WEEKS
49 E556907M
FUSE, 175E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612175LAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
50 E556906M
FUSE, 150E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612150LAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $183.78 22 WEEKS
51 E556970E
FUSE,SOLID LINK,SM-20
(PME), S&C "SWITCH
BLADE" FOR USE IN LIEU
OF SMU-20 FUSE UNIT IN
SME-20 MOUNTING,
14.4KV, 200 AMP
CONTINUOUS (FOR USE IN
S&C "PLE" PADMOUNTED
SWITCH CABINETS)MFG:
10 Each S&C $967.57 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
S&C #5452VENDORS:
ANIXTER; ONE SOURCE;
WESCOLAST UPDATE:
APRIL 11, 2006
52 E556930E
FUSE, 80E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE, FITS
IN SMD-20 MOUNTINGS
FOR OUTDOOR
DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712080VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
18 Each S&C $183.78 22 WEEKS
53 E556510E
FUSE, K-LINK, 10 AMP
MFG: AB CHANCE
#M10KA23 VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
14 Each HPS/CHANCE $4.72 8 WEEKS
54 E552255E
CONNECTOR, SERVICE
CONNECTOR "ORANGE" 2
SOLID TO "BROWN" 8
SOLID AND 10
STRANDEDMFG: (1)
HOMAC#UOBR 41 (2)
BURNDY #ES2W8W.60 ***
ORDER IN BXS OF 100
EACH ***NO
SUBSTITUTIONS
VENDORS: HOMAC
10 Each BURNDY $.74 3 WEEKS
55 E552155M
CONN 1/0 ACSR, SPLIT
BOLT, ALL PURPOSE, MFG:
BURNDY#
KSU25VENDORS:
ANIXTER
10 Each BURNDY $4.15 3 WEEKS
56 E490250M
SPLICE,TORQ
CONNECTOR,NOKIA-
NOKIA -- SPLICE, 69KV,
CONNECTOR, BI-METAL
FOR 1974 AL NOKIA
CABLE TO 1974 AL NOKIA.
(1.48 COND. DIA, 3.01 INS.
DIA)MFG: RAYCHEM
#EPPA-047-38/77-
180VENDORS:ANIXTER;
WESCO; ONE
SOURCELAST UPDATE:
APRIL 11, 2006
10 Each TE/RAYCHEM $559.03 16 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
57 E494225M
FOR MAINTENANCE
ONLY,CONNECTOR STEM
#2 ALUMINUM, 5601 TERM
MFG: (1) 3M #SC0001 **
ORDER IN MULTIPLES OF
10/EA** VENDORS:
ANIXTER; ONE SOURCE
15 Each 3M $19.41 12 WEEKS
58 E556505E
FUSE, K-LINK, 8 AMP MFG:
AB CHANCE #M8KA23
VENDORS: WESCO;
ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $4.72 8 WEEKS
59 E556305E
FUSE,LINK SLO-FAST
6.3AMP, FUSE LINK WITH
REMOVABLE HEAD WITH
TWO SLOW AND FAST
SECTIONS. (STD. PKG. OF
10)MFG: CHANCE
#M6D3SFA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $26.83 18 WEEKS
60 E556900E
FUSE, 80E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612080VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
90 Each S&C $183.78 22 WEEKS
61 E552305E
CONNECTOR, SERVICE
CONNECTOR "YELLOW"
1/0 STRANDED TO
"GREEN" 6 SOLID & 8
STRANDED MFG: (1)
HOMAC #UYG 08, (2)
BURNDY #ES25R6W, STD
PKG 100 EAVENDORS:
HOMAC; ANIXTER;
WESCO; ONE SOURCE
10 Each BURNDY $.74 3 WEEKS
62 E552170M
CONNECTOR, TAP LUG,
350-750
ALUM/COPPERMFG: (1)
BURNDY #QGFL-39B1T6-
TN (2) DOSSERT #QL-75E-
TN (3) TELEDYNE PENN
UNION #LSN-75E-TN
VENDOR: ONE SOURCE;
ANIXTER; WESCO
26 Each BURNDY $29.72 16 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
63 E492230M
SPLICE, UNDERGROUND,
15/25KV, 150 BIL,
STRAIGHT, WITH TEST
POINT, FOR 1/0-350 KCMIL
CU OR AL, COLD SHRINK,
WITH SHEARBOLT
CONNECTOR.MFG:
RICHARDS PART#
62SSCTOR2VENDORS:
ANIXTER, ONE SOURCE,
WESCOLAST UPDATE:
APRIL 19, 2018 -GCS
10 Each RICHARDS $414.86 14 WEEKS
64 E552290E
CONNECTOR, SERVICE
CONNECTOR "YELLOW"
1/0 STRANDED TO "RED" 1
SOLID & 2 STRANDED
MFG: (1) HOMAC #UYR 02,
(2) BURNDY #ES25R2R-
(ORDER IN BOXES OF 100)
VENDORS: HOMAC;
ANIXTER
80 Each BURNDY $.74 23 WEEKS
65 E490251M
SPLICE,TORQ
CONNECTOR,NOKIA-FUJI -
- SPLICE, 69KV,
CONNECTOR, BI-METAL
FOR 1974 AL NOKIA AND
STANDARD 2000 AL FUJI.
(1.48 COND. DIA., 3.01 INS.
DIA.) TO (1.58 COND. DIA.,
2.96 INS. DIA.)MFG:
RAYCHEM #EPPA-047-
38/77-180VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each TE/RAYCHEM $559.03 20 WEEKS
66 E436045M
SPLICE, AUTO, #4/0, STR,
COPPER, AUTO (MIN.
ORDER OF 25 EA)MFG:
(1)RELIABLE #407,
(2)MACLEAN
#407VENDOR: ANIXTER;
WESCO; ONE
SOURCELAST UPDATE:
MAY 15,2008
10 Each MPS/MACLEAN $36.59 2 WEEKS
67 E556020M
FUSE, CURRENT LIMITING,
NX TYPE, 8.3 KV, 25 AMP,
FOR 6.9KV/100KVA URD
XFMRMFG: (1) COOPER:
FA3H25; (2) KHT:
HTFX230025VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
24 Each ABB/HI-TECH $212.38 6 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
68 E436095M
SPLICE, COMPRESSION, #2
COPPER, STRANDED (STD
BOX OF 50)MFG: (1)
NICOPRESS #1-258-
7XVENDORS: ANIXTER;
WESCOLAST UPDATE:
JULY 5, 2005
20 Each NICOPRESS $7.98 6 WEEKS
69 E490380M
SPLICE SECONDARY
COVER ONLY, #14-500
KCMIL CABLE RANGE
(AL/COPPER),
WATERTIGHT WITH FULL
INSULATING VALVE, 600
VOLT.MFG: HOMAC #FSS
500RVENDORS: ONE
SOURCE - MA 490171LAST
UPDATE: OCTOBER 4TH,
2016 - LR
10 Each HOMAC $10.56 12 WEEKS
70 E436063M
SPLICE, AAC
COMPRESSION JUMPER
SPLICE FOR 954.0 KCMIL,
37 STRAND, ALL
ALUMINUM CONDUCTOR,
CODE NAME:
"MAGNOLIA", COMPLETE
WITH PRE-FILL OF ALNOX
INHIBITOR (STD PKG
18)MFG: ALCOA #JC-12, 954
(37 STR) AACVENDORS:
WESCO; ANIXTERLAST
UPDATE: JULY 5, 2005
7 Each ALCOA $40.36 36 WEEKS
71 E436195M
SPLICE,CMP,#6
ACSR,TRIPLEX (MIN
ORDER 50) (USED A LOT IN
"EMERGENCIES")MFG: (1)
BURNDY #YSS6R; (2)
ANDERSON #VANS-6-
6VENDORS: G.E. SUPPLY;
ANIXTER; WESCOLAST
UPDATE: JULY 5, 2005
10 Each BURNDY $3.05 3 WEEKS
72 E552310M
CONN GRND, 4/0 ANGLED
COPPER COMPRESSION
SEAL PLUG WITH SOLID
STUD FORMED TO A 90*
ANGLE TO CENTERLINE
OF CONNECTOR BODY
FOR 4/0 STRANDED
COPPER CONDUCTOR.
MFG: DOSSERT #DPC 21-
SH-90 VENDORS: ONE
SOURCE; ANIXTER;
WESCO
20 Each DOSSERT $43.19 20 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
73 E490253M
SPLICE,TORQ
CONNECTOR,CANADA-
FUJI -- SPLICE, 69KV,
CONNECTOR, BI-METAL
FOR 2000 CU CANADA
WIRE TO 2000 AL
FUJIKURA CABLE. (1.56
COND. DIA., 3.13 INS. DIA)
TO (1.58 COND DIA., 2.96
INS. DIA)MFG: RAYCHEM
#EPPA-047-41/77 - 40/81-
180VENDORS: ANIXTER;
ONE SOURCELAST
UPDATE: JULY 5, 2005
10 Each TE/RAYCHEM $559.03 20 WEEKS
74 E556210E
FUSE, 5 AMP,250V, 13/32" X
1.5" DUAL ELEMENT AND
TIME DELAY FOR STREET
LIGHT APPLICATIONMFG:
BUSSMAN #FNM5 OR
FNQ5VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
64 Each EATON/BUSSM
ANN $6.19 7 WEEKS
75 E556480E
FUSE,LINK SLO-FAST 3.5
AMP, (STD PKG OF 10)MFG:
CHANCE
#M3D5SFA23VENDORS:
WESCO; ONE SOURCE,
ANIXTERLAST UPDATE:
JANUARY 13, 2006
10 Each HPS/CHANCE $14.36 12 WEEKS
76 E494300M
CONN
STEM,COMPRESSION 500
KCMIL AL/CUMFG:
HOMAC #PTM 500-
10TNVENDORS: ONE
SOURCE - MA 490171
10 Each HOMAC $55.37 24 WEEKS
77 E552020M
CONNECTOR #4 MFG: (1)
BURNDY #KSU-20 -- NO
SUBSTITUTIONS --
VENDORS: ANIXTER; ONE
SOURCE
10 Each BURNDY $2.30 3 WEEKS
78 E556630M
FUSE,DOOR PMC W/ARC,
13.8KV, 14.4-17.0KV, SNUF
TYPE SML-4ZMFG: S&C
#92352VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
10 Each S&C $902.70 22 WEEKS
79 E504135M
CONNECTOR, URD, 6-
POSITION, #6 TO 500
KCMIL, WITH BOOTS (3)
PER BOXMFG: HOMAC,
#UH500-6R OR UH500-
6SLRVENDORS: ONE
SOURCE, ANIXTER
131 Each HOMAC $295.58 20 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
80 E556185M
FUSE, 8AMP, K RATED,
SMU-20 S&C POWER FUSE
UNIT, 14.4KV/17KV MAX,
FITS S&C SMD-20 ARM
MOUNTED FUSE HOLDER,
FOR 37.5KKVA OH
XFMRMFG: S&C
#702008VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $183.78 22 WEEKS
81 E552076M
CONNECTOR, TAPPIT
PARALLEL CLAMP, GROVE
A:1/0 STR-397.5, GROVE
B:8STR-2/0STR, PARALLEL,
PRE-GREASED GR V LOV.
*** MUST BE PRE-
GREASED *** MFG: (1)
BURNDY #UCG32RS (2)
HUBBELL #LC52CXB -- NO
SUBSTITUTIONS --
VENDORS: ANIXTER;
WESCO; ONE SOURCE
2653 Each BURNDY $9.07 3 WEEKS
82 E436060M
SPLICE CMP #653.9 ACSR
(JUMPER CONN) MFG: (1)
ALCOA #B-4168-
3VENDORS: B& K
ELECTRIC; ANIXTER;
WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
3 Each ALCOA $66.87 36 WEEKS
83 E504310M
CONNECTOR,
COMPRESSION, COPPER,
1000 KCMIL, 4-HOLE
NEMA FLAT, TIN
PLATEDMFG: (1) BURNDY
#YA44-4N (2) SEFCOR #CL
34-4A-SND VENDORS:
ANIXTER; WESCO; ONE
SOURCE
10 Each BURNDY $80.11 8 WEEKS
84 E556180M
FUSE, 6AMP, K RATED,
SMU-20 S&C POWER FUSE
UNIT, 14.4KV /17KV MAX,
FITS S&C SMD-20 ARM
MOUNTED FUSE HOLDER,
FOR 25KVA OH XFMRMFG:
S&C #702006VENDORS:
ONE SOURCE,
ANIXTERLAST UPDATE:
AUGUST, 2025 - MLI
59 Each S&C $183.78 22 WEEKS
85 E556880E
FUSE,15E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
80 Each S&C $183.78 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
#612015VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
86 E556875E
FUSE, 10AMP, K RATED,
SMU-20 S&C POWER FUSE
UNIT, 14.4KV/17KV MAX,
FITS S&C SMD-20 ARM
MOUNTED FUSE HOLDER,
FOR 50KVA OH XFMRMFG:
S&C #702010VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
305 Each S&C $183.78 22 WEEKS
87 E436200M
SPLICE COMPRESSION #4/0
COPPER, LINEMFG:
BURNDY
#YDS28VENDORS:
MAYDWELL & HARTZELL;
ANIXTER; WESCOLAST
UPDATE: JULY 5, 2005
10 Each BURNDY $14.16 4 WEEKS
88 E552280E
CONNECTOR, SERVICE
CONNECTOR "RED" 1
SOLID TO "BROWN" 8
SOLID & 10 STRANDED,
MFG: (1) BURNDY
#ES2R8W.60 ** ORDER IN
BOXES OF 100 EA.** NO
SUBSTITUTIONS
VENDORS: ANIXTER; ONE
SOURCE; WESCO
10 Each BURNDY $.74 3 WEEKS
89 E436068M
SPLICE, COMPRESSION
LINE SPLICE FOR 954.0
KCMIL, 37 STRAND, ALL
ALUMINUM CONDUCTOR
COMPLETE WITH PRE-FILL
OF ALNOX INHIBITOR ;
CODE NAME: MAGNOLIA,
SPLICE MFG: AFL
CJE12MFG: ALCOA #JC-121,
954 (37 STR.)
AACVENDORS: WESCO;
ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
7 Each ALCOA $41.54 36 WEEKS
90 E556925E
FUSE, 50E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE, FITS
IN SMD-20 MOUNTINGS
FOR OUTDOOR
DISTRIBUTION, UP
FEEDING RISERS AND
BRANCH LINE FUSEMFG:
10 Each S&C $183.78 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
S&C #712050VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
91 E552165M
CONNECTOR, TAP LUG #6
SOL-250 MCM AL/CU
MATERIAL STD-552-
09,MFG: (1) PENN-UNION
#LSN-025N-TN, (2) BURNDY
#QGFL-29-B1-TN, (3)
ANDERSON #TLS-42-TP, (4)
DOSSERT #QL-25-TN -- NO
SUBSTITUTIONS --12 PER
BOX-120 PER CASE
VENDORS: ANIXTER;
WESCO, ONE SOURCE
106 Each BURNDY $10.28 16 WEEKS
92 E556470E
FUSE,LINK SLO-FAST 2.1
AMP, MFG: CHANCE
#M2D1SFA23VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
96 Each HPS/CHANCE $13.66 18 WEEKS
93 E556915E
FUSE, 25E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE FITS IN
SMD-20 MOUNTINGS FOR
OUTDOOR DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712025VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
12 Each S&C $183.78 22 WEEKS
94 E494245M
CONN
STEM,COMPRESSION 1000
KCMIL ALUM ( 5 PER
CASE)MFG: HOMAC #PTF-
1000-10AVENDORS: ONE
SOURCE - MA 490171
29 Each HOMAC $61.20 28 WEEKS
95 E556890E
FUSE, 40E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612040VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST 2025, MLI
18 Each S&C $183.78 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
96 E556605M
FUSE, 20AMP, K RATED,
SMU-20 S&C POWER FUSE
UNIT, 14.4KV/17KV MAX,
FITS S&C SMD-20 ARM
MOUNTED FUSE
HOLDERMFG: S&C
#702020VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $183.78 22 WEEKS
97 E556205M
FUSE, 65E-SLOW, SMU-20,
S&C POWER FUSE UNIT,
14.4KV/17KV MAX, FITS
S&C SMD-20 ARM
MOUNTED FUSE HOLDER,
FOR UPFEED RISERSMFG:
S&C #712065VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
25 Each S&C $183.78 22 WEEKS
98 E552085M
CONNECTOR, SINGLE
BOLT, #6-1/0 ACSR, MFG:
FARGO #GA-9020GLSS --
STD PKG OF 100 --
VENDORS: WESCO;
ANIXTER; ONE SOURCE
1031 Each HPS/FARGO $8.40 3 WEEKS
99 E552215E
CONNECTOR, SERVICE
CONECTOR, "GREEN" 6
SOLID TO "BROWN" 8
SOLID & 10 STRANDED
MFG: (1) BURNDY
#ES6W8W, STD BOX OF 100
EACH, VENDORS: ONE
SOURCE; ANIXTER
10 Each BURNDY $.74 3 WEEKS
100 E552140M
CONNECTOR, SINGLE
BOLT, #2-4/0 ACSRMFG: (1)
FARGO #GA-9040GL -- STD
PKG 50 VENDORS:
ANIXTER; WESCO; ONE
SOURCE
55 Each HPS/FARGO $19.71 3 WEEKS
101 E556545M
FUSE, 120 VOLT, BACK UP
TYPE CURRENT LIMITING
FUSE, TRANS-GUARD EXT,
12 AMP, WITH EYEBOLT
AND STUDMFG: THOMAS
& BETTS ( Hi - TECH
FUSES)
#HTDE235012VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATE:
AUGUST, 2025 - MLI
16 Each ABB/HI-TECH $73.90 4 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
102 E556920E
FUSE, 40E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE, FITS
IN SMD-20 MOUNTINGS
FOR OUTDOOR
DISTRIBUTION,
UPFEEDING RISERS AND
BRANCH LINE FUSEMFG:
S&C #712040VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
12 Each S&C $183.78 22 WEEKS
103 E504235M
CONNECTOR, PMT SEC 12
POS 1/0-750 MCM -- 12
POSITION, DOUBLE ALLEN
SET SCREW/POSITION,
HIGH STRENGTH (6061-T6)
ALUMINUM ALLOY
TRANSFORMER
CONNECTOR. DUAL
RATED FOR #2 MIN. TO 750
KCMIL ALUMINUM OR
COPPER CONDUCTORS.
NEMA DRILLED 9/16"
DIAGRAM MOUNTING
HOLES. -- NO
SUBSTITUTIONS --MFG:
HOMAC #ZBT-6067DS-C
VENDORS: HOMAC C/O
MATZINGER & KEEGAN
102 Each HOMAC $310.27 24 WEEKS
104 E556785E
FUSE, 40 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 500 KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C12VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.84 26 WEEKS
105 E556870E
FUSE, 10 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 75KVA 3 PHASE
PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C06VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.84 26 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
106 E492235M
SPLICE, UNDERGROUND,
15/25KV, 150 BIL,
STRAIGHT, WITH TEST
POINT, FOR 750-1200
KCMIL CU OR AL, COLD
SHRINK, WITH
SHEARBOLT
CONNECTOR.MFG:
RICHARDS PART#
62SSCTQR2VENDORS:
ANIXTER, ONE SOURCE,
WESCOCREATED APRIL,
2018, GCSLAST UPDATE:
DECEMBER 19, 2019 -MLI
10 Each RICHARDS $576.54 20 WEEKS
107 E556225M
FUSE, CURRENT LIMITING,
NX TYPE, 8.3 KV, 8 AMP,
FOR 6.9KV/25KVA URD
XFMRMFG: (1) COOPER:
FA3H8; (2) KHT:
HTFX230008VENDORS:
ANIXTER; ONE SOURCE;
HANSEN &
ASSOCIATESLAST
UPDATE: AUGUST, 2025 -
MLI
10 Each ABB/HI-TECH $203.19 6 WEEKS
108 E494400M
CONNECTOR, STEM, 1000
KCMIL, COPPER, POLY
TERM. -- PIN TERMINAL,
COMPRESSION TYPE FOR
1000KCMIL COPPER,
STRANDED OR
COMPRESSED
CONDUCTOR FOR USE IN
3M QUICK TERM #5603
TERMINATORS.MFG:
HOMAC #CPT-1000-
10VENDORS: ONE SOURCE
- MA 490171
10 Each HOMAC $291.57 18 WEEKS
109 E556400E
FUSE, K-LINK, CAPACITOR
30 AMP, MFG: CHANCE
#M30KA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $5.95 14 WEEKS
110 E552235E
CONNECTOR, SERVICE
CONNECTOR "BLUE" 4
SOLID TO "BROWN" 8
SOLID AND 10 STRANDED
(1) BURNDY #ES4W8W ***
ORDER IN BXS OF 100
EACH ***NO
SUBSTITUTIONS
***VENDORS: HOMAC;
ANIXTER
10 Each BURNDY $.74 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
111 E436155M
SPLICE, AUTO, #1/0, ACSR,
ALUM, (REPLACES 436220)
(pkg of 25) **USED IN
EMERGENCIES**MFG: (1)
MACLEAN POWER #7653;
(2) FARGO #GL-406; (3)
BLACKBURN #AS-
10VENDORS: ANIXTER;
ONE SOURCE;
WESCOLAST UPDATE:
JULY 5, 2005
14 Each HPS/FARGO $30.91 18 WEEKS
112 E556310E
FUSE,LINK SLO-FAST 7.0
AMP, -- FUSE LINK WITH
REMOVABLE HEAD WITH
TWO SLOW AND FAST
SECTIONS.MFG: CHANCE
#M7D0SFA23 (STD PKG
10)VENDOR:ONE SOURCE -
MA 480529LAST UPDATED:
MAY 4TH, 2016 - LR
10 Each HPS/CHANCE $14.90 18 WEEKS
113 E556520E
FUSE,K-LINK 15 AMP,
(STD PKG OF 10)MFG:
CHANCE
#M15KA23VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
15 Each HPS/CHANCE $6.13 8 WEEKS
114 E556015M
FUSE, CURRENT LIMITING,
NX TYPE, 8.3 KV, 18 AMP,
FOR 6.9KV/75KVA URD
XFMRMFG: (1) COOPER:
FA3H18; (2) KHT:
HTFX230018VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each ABB HI-TECH $203.19 6 WEEKS
115 E556320E
FUSE,LINK SLO-FAST 10.4
AMP -- FUSE LINK WITH
REMOVABLE HAED WITH
TWO SLOW AND FAST
SECTIONS. (STD PKG OF
10)MFG: CHANCE
#M10D4SFA23VENDOR:ON
E SOURCE - MA
480529LAST UPDATED:
MAY 4TH, 2016 - LR
10 Each HPS/CHANCE $14.71 18 WEEKS
116 E556005M
FUSE, CURRENT LIMITING,
NX TYPE, 8.3 KV, 10AMP
FOR 6.9KV/37.5KVA URD
XFMRMFG: (1) COOPER:
FA3H10; (2) KHT:
HTFX230010 VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each ABB/HI-TECH $203.19 6 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
117 E552095M
CONNECTOR, 2-BOLT, 336-
800 / 653-653 HI V, MFG:
FARGO #GA-9820GL -- PKG
OF 10 EA. VENDORS:
WESCO; ANIXTER; ONE
SOURCE
233 Each FARGO $64.01 16 WEEKS
118 E556910E
FUSE, 15E-SLOW, S&C
SMU-20, 14.4KV
NORMINNAL, 17.0 KV
MAX, POWER FUSE FITS IN
SMD-20 MOUNTINGS FOR
OUTDOOR DISTRIBUTION,
UPFEEDING RISERS, AND
BRANCH LINE FUSEMFG:
S&C #712015LAST
UPDATED: AUGUST, 2025 -
MLI
12 Each S&C $183.78 22 WEEKS
119 E556885E
FUSE, 25E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612025VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
24 Each S&C $183.78 22 WEEKS
120 E552265E
CONNECTOR, SERVICE
CONNECTOR, "RED" 1
SOLID TO "ORANGE" 2
SOLID & 3&4 STRANDED
MFG: (1) HOMAC #URO 24
(2) BURNDY #ES2R2W ***
ORDER IN BXS OF 100
EACH *** VENDORS:
HOMAC; ANIXTER
101 Each BURNDY $.74 8 WEEKS
121 E556895E
FUSE, 50E-STD, S&C SMU-
20, 14.4KV NORMINNAL,
17.0 KV MAX, POWER
FUSE, FITS IN SMD-20
MOUNTINGS FOR
OUTDOOR
DISTRIBUTIONMFG: S&C
#612050VENDOR:
ANIXTER, ONE
SOURCELAST UPDATED:
AUGUST, 2025 - MLI
42 Each S&C $183.78 22 WEEKS
122 E556010M
FUSE, CURRENT LIMITING,
NX TYPE, 8.3 KV, 12 AMP,
FOR 6.9KV/50KVA URD
XFMRMFG: (1) COOPER:
FA3H12; (2) KHT:
HTFX230012VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
3 Each EATON/CPS $297.47 16 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
123 E556795E
FUSE, 100 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 1000 KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C16VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.78 26 WEEKS
124 E556600M
FUSE, 125AMP, 15.5KV,
HIGH AMPERE OVERLOAD
BAYONET FUSE LINK--FOR
USE IN 2500 KVA PAD
MOUNT TRANSFORMERS
EQUIPPED WITH BAY-O-
NET FUSE HOLDERS IN
SERIES WITH 300 AMPERE
INTERNAL CURRENT
LIMITING COOPER POWER
SYSTEMS ELSP
FUSES.MFG: COOPER #
4038361C05CBCREATED
JULY 6, 2022, GCS
10 Each EATON/CPS $179.95 18 WEEKS
125 E556415E
FUSE, K-LINK, CAPACITOR
65 AMP, MFG: CHANCE
#M65KA23 -- STD PKG OF
10 --VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
20 Each HPS/CHANCE $10.86 8 WEEKS
126 E556535M
FUSE HOLDER KIT,
SINGLE, 120V, WITH TWO
(2) BOOTS - STREET
LIGHTMFG: (1) BUSSMAN:
FUSE HOLDER #HEB-AB ;
BOOT #
2A0660VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
500 Each EATON/BUSSM
ANN $60.97 18 WEEKS
127 E504300M
CONNECTOR, GROUNDING
FOR 4/0 COPPER WIRE -
SERVIT POST WITH STUD
TYPE K2C SERVIT POST
FOR 2 #4/0 COPPER
CABLES TO FLAT WITH
1/2-13 THREADED STUD 1-
1/2" LONG -- NO
SUBSTITUTIONS --MFG:
BURNDY
#K2C28G3VENDORS:
ANIXTER; ONE SOURCE
316 Each BURNDY $30.51 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
128 E556490E
FUSE,LINK SLO-FAST 5.2
AMP, MFG: CHANCE
#M5D2SFA23 -- MIN ORDER
OF 10 EACH --VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $16.06 18 WEEKS
129 E552120M
CONN 2 BLT 1000 MCM
ALL PURP, MFG:BURNDY -
KVSU-44, II DBA SU, DBA -
1000 SU VENDORS:
ANIXTER, ONE SOURCE
41 Each BURNDY $44.61 3 WEEKS
130 E556975E
FUSE, NXC, 40 AMP FOR
150KVAR PAD CAPACITOR
OUTDOOR UNITMFG:
COOPER
#FA5J40VENDORS:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each EATON/CPS $541.21 36 WEEKS
131 E556956M
FUSE, 150E-SLOW, SMU-40
POWER FUSE UNIT 17KV
NOMINAL, FITS IN SMD-40
MOUNTING CUTOUT FOR
OUTDOOR DISTRIBUTION.
TCC 119-2MFG: (1) S&C
#832150VENDOR:
ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $540.54 2 WEEKS
132 E556775E
FUSE,15AMP,15.5KV,BAYO
NET CARTRIDGE, POWER
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 150KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C08VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.84 20 WEEKS
133 E556525E
FUSE, K-LINK, 20
AMPMFG: CHANCE
#M20KA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
14 Each HPS/CHANCE $5.33 8 WEEKS
134 E556957M
FUSE, 200E-SLOW, SMU-40
POWER FUSE UNIT 17KV
NOMINAL, FITS IN SMD-40
MOUNTING CUTOUT FOR
OUTDOOR DISTRIBUTION.
TCC 119-2MFG: (1)
S&C#832200VENDOR:
ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $540.54 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
135 E556955E
FUSE, 80E-SLOW, SMU-40
POWER FUSE UNIT 17KV
NOMINAL, FITS IN SMD-40
MOUNTING CUTOUT FOR
OUTDOOR DISTRIBUTION.
TCC 119-2MFG: (1) S&C
#832080VENDOR:
ANIXTER; ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $540.54 22 WEEKS
136 E556425E
FUSE, K-LINK, 100
AMPMFG: CHANCE
#M100KA23VENDOR:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
25 Each HPS/CHANCE $10.42 8 WEEKS
137 E552100M
CONNECTOR, SINGLE
BOLT, 6-653 ACSR HI
VMFG: FARGO #GA-9842L
-- STD PKG OF 25 EA. -
VENDOR: WESCO;
ANIXTER; ONE SOURCE
67 Each HPS/FARGO $29.56 12 WEEKS
138 E556585M
FUSE, REFILL, 300E STD,
FOR SM-5 HOLDER, 14.4 KV
FOR SUBSTATIONMFG:
S&C #132500R4, TCC153-
4VENDORS: ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $308.11 22 WEEKS
139 E504060M
CONNECTOR URD, 5 POS
#6-350MCM, #UH5R, MUST
BE SHIPPED W/ SHC 4616
ROCKET BOOTINACTIVTE
AT "0", REPLACED BY
E504065M (UH6R)MFG:
HOMAC #UH5R VENDORS:
ONE SOURCE, ANIXTER
155 Each HOMAC $66.43 30 WEEKS
140 E556515E
FUSE,K-LINK 12 AMP, MFG:
CHANCE
#M12KA23VENDORS:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $5.33 8 WEEKS
141 E556435E
FUSE, K-LINK, CAPACITOR
200 AMP, MFG: CHANCE
#M200KA23 -- LEAD TIME
IS 4 TO 6 WEEKS --
VENDORS: WESCO;
ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $34.05 8 WEEKS
142 E556580M
FUSE, REFILL, 250E STD,
FOR SM-5 HOLDER, 14.4 KV
FOR SUBSTATIONMFG:
S&C #132400R4, TCC153-
4VENDORS: ANIXTER, ONE
10 Each S&C $308.11 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
143 E552210M
CONNECTOR, ALUM DIST,
666MCM 4/0 ACSR, MFG:
FARGO #GA-9843GL (PKG
OF 25 EA.)VENDORS:
WESCO; ANIXTER
48 Each HPS/FARGO $31.07 4 WEEKS
144 E556780E
FUSE, 25 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 300 KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C10VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.84 24 WEEKS
145 E556590M
FUSE, REFILL, 400E SLOW,
FOR SM-5 HOLDER, 14.4 KV
FOR SUBSTATIONMFG:
S&C #262600R4, TCC119-
4VENDORS: ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $308.11 22 WEEKS
146 E556255M
FUSE, SM-5 REFILL,
200AMP, 14.4KV/17KV
MAX, FOR PMC FUSE
POSITIONMFG: S&C
#132300R4VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $308.11 22 WEEKS
147 E490185M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR
ANAHEIM #2 ALUMINUM
STRANDED CONDUCTOR
TO EDISON #2
CONDUCTOR , 175 MIL
INSULATION, JACKETED
CONCENTRIC NEUTRAL
CABLE, WITH
CONNECTORSMANUFACT
URER: 3M, PART NUMBER:
5411-CI-
21MANUFACTURER:
ELASTIMOLD, PART
NUMBER: 255-FAB-
1VENDOR: ANIXTER, ONE
SOURCE, WESCOLAST
UPDATE: AUGUST 29, 2006
-- AA
10 Each 3M $42.30 8 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
148 E492215M
CONNECTOR, VOLTAGE
SENSING PLUG,
ELBOWSENSE, 15KV,
200/600AMP, 95KV BIL,
60:1 VOLTAGE RATIO TO
GET 120 V OUTPUT.MFG:
(1) ELASTIMOLD
#650REVSIB (2) LINDSEY
#9542/0515/7MVENDORS:
WESCO; ANIXTER; ONE
SOURCE
10 Each ELASTIMOLD $1,407.98 28 WEEKS
149 E492255M
RECEPTACLE, 200AMP,
LOAD BREAK INSULATING
CLAMP, LOAD BREAK NO
TEST POINT, FULLY
SHIELDED, FULLY
SUBMERSIBLE, 15KV
CLASS WITH AN
INTEGRAL GROUND ROD.
(USE E492165M, UNLESS
OUT OF STOCK)MFG:
COOPER POWER SYSTEM
#LPC215 VENDORS: ONE
SOURCE, ANIXTERLAST
UPDATE: APRIL 8, 2025 -
LR
86 Each EATON/CPS $40.68 3 WEEKS
150 E490370M
SPLICE REPAIR KIT, #2 AL,
SPLICE, MOLDED RUBBER
SPLICING KIT FOR #2
STRANDED CABLE,
COMPLETE WITH ONE
CONNECTOR CIR-2 FOR #2
ALUMINUM CABLE. MFG:
3M 5411R WITH CIR-2
CONNECTORVENDORS:
COOPER POWER SYSTEM;
WESCO; ANIXTERLAST
UPDATE: JULY 5, 2005
11 Each 3M $174.39 16 WEEKS
151 E436135M
SPLICE COMP #1/0 ACSR -
SPLICING SLEEVE, #1/0
ACSR WITH SIX (6)
ALUMINUM AND ONE (1)
STEEL STRANDS BURNDY
DIE INDES 245.MFG:
KEARNEY #OH 1/0-
61ASVENDOR: ANIXTER;
WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
3 Each BURNDY $86.98 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
152 E796445M
CONNECTOR AND NUT AS
LISTED BELOW:ITEM 1:
CONNECTOR BULKHEAD
RECEPTACLE, 12 PIN,
MALE, 14 AWG WIRE, 5'
PIGTAILS FOR CURRENT &
STATUS CABLE - QTY:
ONE (1) EACHMFG:
INNOVATIVE
SWITCHGEAR SOLUTIONS
INC #CON-0042ITEM 2:
NUT, BRASS, 32 MM, TO
SECURE ITEM 1 TO
CABINET - QTY: ONE (1)
EACHMFG: INNOVATIVE
SWITCHGEAR SOLUTION,
INC #PP-10222WHEN
ORDERING, PLEASE
CONFIRM WITH
ENGINEERING.VENDORS:
ONE SOURCE, ANIXTER,
MATZINGER KEEGAN
51 Each EATON ISG $1,010.50 6 WEEKS
153 E490345M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR #1/0
ALUMINUM STRANDED
CONDUCTOR, 175 MIL
INSULATION, JACKETED
CONCENTRIC NEUTRAL
CABLE, WITH
CONNECTORSMFG: 3M
#5411-CI-1/0; COOPER
POWER #SP15B004:
ELASTIMOLD
#15PCJ1G1240, TE #CSJA-
JCN/EG-1511M5VENDORS:
ONE SOURCE - MA
480378LAST UPDATE:
MARCH 1, 2016
29 Each ELASTIMOLD $106.22 16 WEEKS
154 E552015M
CONNECTOR #6 MFG:(1)
BURNDY #KSU-17 (2)
PENN UNION #SW-3 (3)
IISCO #SK-6 VENDORS:
WESCO; ANIXTER; ONE
SOURCE
184 Each BURNDY $2.15 3 WEEKS
155 E492145M
RECEPTACLE, REDUCING
TAP PLUG, 600AMP TO
200AMP, 15KV, 95KV BIL,
LOAD BREAK,
SUBMERSIBLE
SEPARABLE, INSULATED,
WITHOUT 5/8"-11 STUD(20
PER CASE)MFG: (1)
ELASTIMOLD #650ETP; (2)
HUBBELL 615ETP; (3)
RICHARDS
P615ETPVENDORS: ONE
SOURCE, ANIXTER LAST
153 Each ELASTIMOLD $166.97 0.3
WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
UPDATE: SEPTEMBER 13,
2023 - MLI
156 E490170M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR #4/0
ALUMINUM STRANDED
CONDUCTOR, 175 MIL
INSULATION, JACKETED
CONCENTRIC NEUTRAL
CABLE, WITH
CONNECTORS (STD PKG
25)MANUFACTURER: (1)
3M #5412-CI-4/0 (2)
ELASTIMOLD
#15PCJ1H1270 (3) TE #CSJA-
JCN/EG-151M5(3) COOPER
POWER SYSTEMS
#SP15B007 VENDOR: ONE
SOURCELAST UPDATE:
SEPTEMBER 13, 2023 - MLI
6 Each ELASTIMOLD $106.22 24 WEEKS
157 E490375M
SPLICE, SECONDARY, 2-
WIRE, #6 TO 350 KCMIL
ALUMINUM, LONG, 600
VOLT RATED,
WATERTIGHT, 2-
CONNECTORS OUTLET, 2-
SCREWS PER
CONDUCTOR, REPAIR..
MFG: HOMAC UH11L (STD.
PKG. OF 25)VENDORS: ONE
SOURCE, ANIXTER LAST
UPDATE: SEPTEMBER 13,
2023 - MLI
836 Each HOMAC $36.54 6 WEEKS
158 E556380M
FUSE, SM-4 REFILL,
40AMP, 14.4KV/17KV MAX,
FOR PMC SWITCHMFG:
S&C #122060R4VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $248.65 22 WEEKS
159 E556850M
FUSE, 200E SLOW, SM-4
REFILL IN PMC FUSE
HOLDERMFG: S&C
#252300R4VENDORS:
ANIXTER, ONE
SOURCELAST UPDATE:
AUGUST, 2025 - MLI
10 Each S&C $248.65 22 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
160 E490390M
SPLICE, UNDERGROUND
CABLE, ALUMINUM
SECONDARY CABLE WITH
2-SET SCREW CONNECTOR
AND EPDM FLOOD SEAL
SLEEVES, REPAIR, #6-350
KCMIL, MFG: HOMAC USK
350-12-DSVENDORS: ONE
SOURCE, ANIXTERLAST
UPDATE: JANUARY 9, 2019
-LR
38 Each HOMAC $61.30 3 WEEKS
161 E556230M
FUSE, SM-4 REFILL,
100AMP, 14.4KV/17KV
MAX, FOR PMC FUSE
POSITIONMFG: S&C
#122150R4VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $248.65 22 WEEKS
162 E556790E
FUSE, 65 AMP, 15.5KV,
BAYONET CARTRIDGE --
CURRENT SENSING
CARTRIDGE FUSE FOR USE
IN 750 KVA PADMOUNT
TRANSFORMERMFG:
COOPER
#4000353C14VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each EATON/CPS $27.84 26 WEEKS
163 E556240M
FUSE, SM-4 REFILL,
150AMP, 14.4KV/17KV
MAX, FOR PMC FUSE
POSITIONMFG: S&C
#122250R4VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $248.65 22 WEEKS
164 E552220E
CONNECTOR, SERVICE
CONNECTOR "GREEN" 6
SOLID, 8 STRANDED TO
"GREEN" 6 SOLID , 8
STRANDED MFG: (1)
HOMAC #UGG88 (2)
BURNDY #ES6W6W ***
ORDER IN BXS OF 100
EACH *** -- NO
SUBSTITUTIONS
VENDORS: ONE SOURCE,
HOMAC
54 Each BURNDY $.74 3 WEEKS
165 E504125M
CONNECTOR, URD, 2
POSITION #6-500MCM,
WITH BOOTSMFG: #UH500-
2R (STD. PKG OF
3)VENDORS: ONE SOURCE,
ANIXTER
214 Each HOMAC $86.93 18 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
166 E556645M
FUSE TEST, 25A X-LMTR
W/O FITTINGS -- COOPER
POWER X-LIMITER
CURRENT LIMITING FUSE,
15KV, 25AMP, 125KVBIL,
SYSTEM INTERRUPTING
50KA, TO BE USED WITH
S&C TYPE SMD-20 FUSE
HOLDER, ARM
MOUNTED.MFG: (1)
COOPER POWER X-
LIMITER CAT
#15F025HD1A VENDORS:
S&C ELECTRIC; ANIXTER;
ONE SOURCELAST
UPDATE: JULY 5, 2005
3 Each S&C $414.67 22 WEEKS
167 E556235M
FUSE, SM-4 REFILL,
125AMP, 14.4KV/17KV
MAX, FOR PMC FUSE
POSITIONMFG: S&C
#122200RVENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $248.65 22 WEEKS
168 E556250M
FUSE, SM-4 REFILL,
200AMP, 14.4KV/17KV
MAX, FOR PMC FUSE
POSITIONMFG: S&C
#122300R4VENDOR: ONE
SOURCE, ANIXTERLAST
UPDATED: AUGUST, 2025 -
MLI
10 Each S&C $248.65 22 WEEKS
169 E556410E
FUSE,K-LINK, CAPACITOR
50 AMP, MFG: CHANCE
#M50KA23VENDORS:
WESCO; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
34 Each HPS/CHANCE $6.18 8 WEEKS
170 E504130M
CONNECTOR URD, 4-
POSITION, UH-500-R
SERIES (10 PER BOX) MFG:
HOMAC #UH-500-4R
SERIESVENDORS: ONE
SOURCE, ANIXTER
139 Each HOMAC $143.14 20 WEEKS
171 E492165M
RECEPTACLE, 200AMP,
LOAD BREAK INSULATING
CLAMP, LOAD BREAK
WITH TEST POINT, FULLY
SHIELDED, FULLY
SUBMERSIBLE, 15KV
CLASS WITH AN
INTEGRAL GROUND
ROD.(30 PER CASE)MFG:
ELASTIMOLD
#168DRGVENDORS: ONE
SOURCE, ANIXTERLAST
222 Each ELASTIMOLD $208.37 4 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
UPDATE: NOVEMBER 14,
2024 -PER BI
172 E556385M
FUSE, SM-4 REFILL,
50AMP, 14.4KV/17KV MAX,
FOR PMC SWITCHMFG:
S&C #122075R4VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $248.65 22 WEEKS
173 E556395M
FUSE, SM-4 REFILL,
80AMP, 14.4KV/17KV MAX,
FOR PMC SWITCHMFG:
S&C #122125R4VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
22 Each S&C $248.65 22 WEEKS
174 E556375M
FUSE, SM-4 REFILL,
25AMP, 14.4KV/17KV MAX,
FOR PMC SWITCHMFG:
S&C #122040R4VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $248.65 22 WEEKS
175 E504065M
CONNECTOR, 6 POSITION,
#6-350MCM, UH6R, MUST
BE SHIPPED WITH
APPROVED ROCKET BOOT
(STANDARD PKG. OF
8)MFG: HOMAC
#UH6RVENDORS: ONE
SOURCE, ANIXTER
114 Each HOMAC $75.93 22 WEEKS
176 E556390M
FUSE, SM-4 REFILL,
65AMP, 14.4KV/17KV MAX,
FOR PMC SWITCHMFG:
S&C #122100R4VENDOR:
ONE SOURCE,
ANIXTERLAST UPDATED:
AUGUST, 2025 - MLI
10 Each S&C $248.65 22 WEEKS
177 E556485E
FUSE,LINK,SLO-FAST,4.2
AMP, MFG: CHANCE
#M4D2SFA23 -- STD PKG
OF 10 --VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
140 Each HPS/CHANCE $14.61 18 WEEKS
178 E504055M
CONNECTOR, #6-350, 4-
POSITION, #UH4R "MUST
BE SHIPPED WITH SHC
4616 ROCKET BOOT" (12
PER PACK)MFG: HOMAC
741 Each HOMAC $51.52 6 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
#6-350MCM,
#UH4RVENDORS: ONE
SOURCE, ANIXTER
179 E556460E
FUSE,LINK SLO-FAST 1.3
AMP, MFG: CHANCE
#M1D3SFA23VENDORS:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each HPS/CHANCE $14.85 18 WEEKS
180 E492190M
CONNECTOR, LOAD
BREAK ELBOW, 200 AMP,
15KV WITH TEST POINT
FOR #1/0 STRANDED
ALUMINUM CABLE WITH
BI-METAL CONNECTOR
CABLE OD OVER
INSULATION:.785" (CABLE
ACCESORY RANGE .635
- .905 ELASTIMOLD, .61
- .97 COOPER) 15 PER
CASEMFG: (1) COOPER
POWER #LE215-ABO6T (2)
ELASTIMOLD #162LR-
B5240 (3) HUBBELL
#215LE45T (4) RICHARDS
21LBT2B9BVENDORS:
ONESOURCE, ANIXTER
817 Each ELASTIMOLD $46.11 0.3
WEEKS
181 E492245M
CONNECTOR, SHEAR
BOLT, 600-900 AMP, TIN
PLATED ALUMINUM, 750
TO 1250 KCMIL, CU AND
ALMFG: ELASTIMOLD #
EACT-1250, RICHARDS
#P6ALR5, HUBBELL
625LUG4
118 Each ELASTIMOLD $134.47 48 WEEKS
182 E556530E
FUSE,K-LINK 25 AMP, (STD
PKG OF 10)MFG: CHANCE
#M25KA23VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
19 Each HPS/CHANCE $6.63 8 WEEKS
183 E490060M
SPLICE, COMPRESSION
FOR 2/0 STRANDED
COPPER, WITH OIL STOP
MFG: (1) BURNDY #YSP
26T (2) DOSSERT #DPCP-
13-TVENDORS: WESCO;
ONE SOURCE;
ANIXTERLAST UPDATE:
AUGUST 10, 2005 -AA
24 Each BURNDY $8.77 2 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
184 E504315M
CONNECTOR, URD, 3 POS,
UNDERGROUND FOR 2 TO
1000 MCM CABLE WITH
THREE OUTLETS, 1000
SERIES FLOOD-SEAL,
SUBMERSIBLE
CONNECTOR. ( STD PKG IS
3 PCS)MFG: HOMAC
#UH1000-3RVENDORS: ONE
SOURCE, ANIXTER
10 Each HOMAC $180.01 28 WEEKS
185 E492060M
RECEPTACLE, 600 AMP,
15kV DEADBREAK T-
BODY WITH TEST POINT -
FOR 1000 AND 1100 KCMIL
CABLE WITH STUDMFG:
(1) ELASTIMOLD #K656-
BLR; (2) COOPER #DT625S;
(3) RICHARDS 62LCT; (4)
HUBBELL
625TBTVENDORS: ONE
SOURCE, ANIXTERLAST
UPDATE: JAN 2025 - MLI
65 Each ELASTIMOLD $142.23 4 WEEKS
186 E552285E
CONNECTOR, SERVICE
CONNECTOR "YELLOW"
1/0 STRANDED TO
"YELLOW" 1/0 STRANDED
MFG: (1) HOMAC # UYY 00,
(2) BURNDY #ES25R25R--
ORDER IN BOXES OF 100
EA.-- NO SUBSTITUTIONS
VENDORS: HOMAC;
ANIXTER; ONE SOURCE
191 Each BURNDY $.74 3 WEEKS
187 E494345M
CONN STEM 4/0 ALUM, 3M
5601 TERM MFG: (1) 3M
#SC0040 (STD PKG OF
10)VENDORS: ONE
SOURCE; ANIXTER
37 Each 3M $40.30 12 WEEKS
188 E490200M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR #2
ALUMINUM STRANDED
CONDUCTOR, 175 MIL
INSULATION, JACKETED
CONCENTRIC NEUTRAL
CABLE, WITH
CONNECTORSMANUFACT
URER: 3M #5411-CI-
2,ELASTIMOLD
#15PCJ1F1220COOPER:#SP1
5A002, TE #CSJ-JCN/EG-
1511M5VENDOR: ONE
SOURCE - MA 480378LAST
UPDATE: MARCH 1, 2016
13 Each ELASTIMOLD $88.23 28 WEEKS
189 E552260E
CONNECTOR, SERVICE
CONNECTOR, "RED" 1
SOLID TO "RED" 1 SOLID
AND 1&2 STRANDEDMFG:
(1) HOMAC #URR 22 (2)
331 Each BURNDY $.74 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
BURNDY #ES2R2R
VENDORS: HOMAC;
ANIXTER
190 E552110M
CONNECTOR, 500 MCM, 2-
BOLT, ALL PURPOSEMFG:
(1) PENN UNION #VTA4 (2)
BURNDY #KVSU-34 (3)
BLACKBURN (T&B)
#2B500PWVENDORS:
ANIXTER; WESCO; ONE
SOURCE
182 Each BURNDY $23.85 3 WEEKS
191 E492195M
CONNECTOR, LOAD
BREAK ELBOW, 15KV,
200AMP, 95KV BIL, WITH
LONG BI-METAL
CONNECTOR FOR #4/0
STRANDED AL/CU, 175 MIL
UG CABLE WITH TEST
POINT. INSULATION
OD .908 IN. MFG: (1)
ELASTIMOLD #162LR-C-
5270 (2) COOPER
#LE215CO9T (3) HUBBLE
#215LE58T(15 PER CASE)
(4) RICHARDS
21LBT2C12BVENDORS:
ONESOURCE, ANIXTER
196 Each ELASTIMOLD $46.11 0.3
WEEKS
192 E796440M
CONNECTOR AND NUT AS
LISTED BELOW:ITEM 1:
CONNECTOR BULKHEAD
RECEPTACLE, 7 PIN,
MALE, 16 AWG WIRE, 5'
PIGTAILS FOR STATUS
CABLE - QTY: ONE (1)
EACHMFG: INNOVATIVE
SWITCHGEAR SOLUTIONS
INC #CON-0040ITEM 2:
NUT, BRASS, 22 MM, TO
SECURE ITEM 1 TO
CABINET - QTY: ONE (1)
EACHMFG: INNOVATIVE
SWITCHGEAR SOLUTION,
INC #PP-10223WHEN
ORDERING, PLEASE
CONFIRM WITH
ENGINEERING.VENDORS:
ONE SOURCE, ANIXTER,
MATZINGER KEEGAN
124 Each EATON ISG $684.21 6 WEEKS
193 E552115M
CONNECTOR, 400-800 MCM
(750 MCM) 2 BOLT ALL
PURPOSE (BOXES OF
12)MFG: (1) PENN UNION
#VTA5 (2) BURNDY
#KVSU-40 (3) BLACKBURN
72 Each BURNDY $43.79 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
(T&B) #2B800PWVENDORS:
ANIXTER; ONE SOURCE
194 E552145M
CONNECTOR, #10 SOLID -
#2 SOLID MFG:BURNDY
#KSU22VENDORS:
ANIXTER; ONE SOURCE;
WESCO
10 Each BURNDY $2.71 3 WEEKS
195 E556650M
FUSE TEST, 25 AMP,
COOPER POWER ELF
CURRENT LIMITING FUSE,
W/ FTGS, 15KV, 125KV BIL,
SYSTEM INTERRUPTING
43KA, TO BE USED WITH
CHANCE TYPE "C" OR S&C
TYPE "XS" CUTOUT.MFG:
(1) COOPER POWER ELF
CAT #FAK44W25.12 - 14
WEEK LEAD
TIMEVENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: OCTOBER 6,
2016 - LR
33 Each EATON/CPS $414.67 6 WEEKS
196 E494415M
CONNECTOR, STEM, 1/0
STRANDED
ALUMINUM/COPPER-
AL/CU--3M- TO BE USED
WITH COLD SHRINK
TERMINATOR FOR #1/0 AL
STRANDED, 15KV CABLE.
CABLE OD : (CONDUCTOR
+ INSULATOR .766") MFG:
(1) 3M #SC0010- --NO
SUBS- NO ALTERNATES-
VENDOR: ANIXTER; ONE
SOURCE, WESCO
93 Each 3M $19.36 12 WEEKS
197 E436105M
SPLICE, COMPRESSION, #2
(7) STRANDED
ALUMINUM CONDUCTOR
(MIN ORDER 100)MFG: (1)
NICOPRESS #AL-2STR-X
(2) BURNDY #
YDS2CAVENDORS:
ANIXTER; WESCO; ONE
SOURCE
17 Each NICOPRESS $6.94 6 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
198 E796460M
CONNECTOR AND NUT AS
LISTED BELOW:ITEM 1:
CONNECTOR BULKHEAD
RECEPTACLE, 4 PIN,
MALE, 14 AWG WIRE, 5'
PIGTAILS FOR VOLTAGE
SENSORS CABLE - QTY:
ONE (1) EACHMFG:
INNOVATIVE
SWITCHGEAR SOLUTIONS
INC #CON-0050ITEM 2:
NUT, BRASS, 22 MM, TO
SECURE ITEM 1 TO
CABINET - QTY: ONE (1)
EACHMFG: INNOVATIVE
SWITCHGEAR SOLUTION,
INC #PP-10223WHEN
ORDERING, PLEASE
CONFIRM WITH
ENGINEERING.VENDORS:
ONE SOURCE, ANIXTER,
MATZINGER KEEGAN
40 Each EATON ISG $600.00 5 WEEKS
199 E436165M
SPLICE CMP #4/0 ACSR -
FULL TENSION SPLICE,
SINGLE SLEEVE, ACSR
CONDUCTOR,
COMPRESSION TYPEMFG:
(1) KEARNEY #H-4/0-61AS;
(2)BURNDY #YDS28RL; (3)
BLACKBURN #RC-
40VENDOR: ANIXTER;
WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
10 Each BURNDY $19.65 3 WEEKS
200 E490125M
SPLICE, UNDERGROUND,
15KV, STRAIGHT, FOR 1000
AND 1100 KCMIL,
ALUMINUM STRANDED
CONDUCTOR, 175 MIL
INSULATION, JACKETED
CONCENTRIC NEUTRAL
CABLE, WITH
CONNECTORSMANUFACT
URER: (1) 3M #5418A-WG-
1000-AL, (2) ELASTIMOLD
#15PCJ1N1410Z, TE #CSJA-
JCN/EG-1514M9 VENDORS:
ANIXTER, ONE SOURCE,
WESCO LAST UPDATE:
OCT. 2021 -- MLI
34 Each ELASTIMOLD $293.27 18 WEEKS
201 E556405E
FUSE, K-LINK,CAPACITOR
40 AMP, (STD PKG OF
10)MFG: CHANCE
#M40KA23VENDOR:ONE
SOURCE - MA 480529LAST
UPDATED: MAY 4TH, 2016 -
LR
27 Each HPS/CHANCE $6.18 8 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
202 E436145M
SPLICE, TENSION, AUTO,
#4 ACSR ALUM, NOTE:
OFTEN USED IN
EMERGENCIES MFG: (1)
FARGO #GL-402A (2)
MACLEAN POWER #7651
(3) T&B #ATS 4 VENDOR:
ANIXTER; WESCO; ONE
SOURCELAST UPDATE:
JULY 5, 2005
12 Each HPS/FARGO $14.68 4 WEEKS
203 E552125M
CONNECTOR, VISE TYPE
FOR 2/0 STRANDED
COPPER, MAXIMUM TWO
CONDUCTORSMFG:
(1)FARGO #GC-5020S (PKG.
OF 125 EA) (2) RICHARDS #
VC10S, (3) SENIOR
INDUSTRIES SI-2140 (PKG
OF 25EA) VENDORS:
ANIXTER; ONE SOURCE;
WESCO
268 Each RICHARDS $6.31 4 WEEKS
204 E552080M
CONNECTOR, VISE TYPE
FOR #4 STRANDED
COPPER, MAXIMUM TWO
CONDUCTORS , PACKAGE
OF 50 EACHMFG: (1)
FARGO #GC-5004, (2)
RICHARDS #VC5, SENIOR
INDUSTRIES SI-2169
VENDORS: WESCO, ONE
SOURCE, ANIXTER
477 Each HPS/FARGO $5.85 3 WEEKS
205 E552040M
CONNECTOR, VISE TYPE
FOR #2 -7 STRANDED
COPPER CONDUCTORS,
MAXIMUM TWO
CONDUCTORS, PACKAGE
OF 50 EACHMFG: (1)
FARGO #GC-5002S, (2)
RICHARDS # VC10, SENIOR
INDUSTRIES #SI-2141
VENDORS: WESCO, ONE
SOURCE, ANIXTER
390 Each HPS/FARGO $6.03 3 WEEKS
206 E552105M
CONNECTOR 350 MCM
MFG:(1) BURNDY #KVSU-
31 (2) ISLO (3) PENN
UNION #VTA3 (4)
BLACKBURN
(T&B)#2B350PW-- NO
SUBSTITUTIONS
VENDORS: ANIXTER;
WESCO; ONE SOURCE
57 Each BURNDY $28.04 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
207 E436235M
SPLICE, COMPRESSION,
FOR #6, 7 STRAND,
ALUMINUM CONDUCTOR
W/INHIBITOR AND END
CAPPED MFG: THOMAS
BETTS #60507, BURNDY
#YS6CA1VENDORS:
ANIXTERLAST UPDATE:
JULY 5, 2005
10 Each BURNDY $4.82 3 WEEKS
208 E436030M
SPLICE, #6 SOLID, #8
STRANDED COPPER,
AUTOMATIC (STD PKG
100)MFG: (1) FARGO #GL-
111 (2) MACLEAN
#61VENDORS: WESCO;
ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
14 Each HPS/FARGO $16.58 2 WEEKS
209 E436065M
SPLICE COMPRESSION
#653.9 ACSR (ALUM) MFG:
(1) ALCOA #7927.100-653.9
(18/3) ACSRVENDOR: B&K
ELECTRIC; ANIXTER; ONE
SOURCELAST UPDATE:
JULY 5, 2005
9 Each ALCOA $80.81 36 WEEKS
210 E436150M
SPLICE, #2 ACSR, AUTO,
ALUMINUMMFG: (1)
MACLEAN POWER #7652
(2) FARGO #GL404-2A (3)
T&B #ATS-2VENDOR:
ANIXTER; WESCOLAST
UPDATE: JULY 5, 2005
23 Each HPS/FARGO $14.45 3 WEEKS
211 E552045M
CONNECTOR, VISE TYPE
FOR 4/0 STRANDED
COPPER, MAXIMUM TWO
CONDUCTORS, PACKAGES
OF 50 EACHMFG: (1)
FARGO #GC-5040, (2)
RICHARDS # VC12, (3)
SENIOR INDUSTRIES SI-
2143 VENDORS: ANIXTER;
ONE SOURCE; WESCO
412 Each HPS/FARGO $14.95 2 WEEKS
212 E436230M
SPLICE, COMPRESSION
FOR 2/0 STRANDED
COPPER, WITH OIL STOP
MFG: (1) BURNDY #YSP
26T (2) DOSSERT #DPCP-
13-T (3) HOMAC #PTC-
2/0VENDORS: WESCO; ONE
SOURCE; ANIXTERLAST
UPDATE: 2-19-08 - NG
10 Each BURNDY $8.77 10 WEEKS
213 E436025M
SPLICE, #4 SOLID TO 8
AC.W. AUTOMATIC,
COPPER MFG: (1)
MACLEAN POWER #41 (2)
FARGO #GL-112VENDORS:
ANIXTER; GRAYBAR;
12 Each HPS/FARGO $10.93 3 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
Line Items Details One Source
# Stock
Code Description
Est.
Annual
Quantity
Unit of
Measure
Quoted
Manufacturer Unit Cost Lead Time
WESCO; ONE
SOURCELAST UPDATE:
APRIL 11, 2006
214 E490340M
SPLICE, 69KV, WITH 2K AL
TORQ CONNECTOR --
69KV HEAT SHRINK
SPLICE WITH ALUMINUM
TORQUE CONTROL
BOLTED CONNECTOR FOR
2,000 KCMIL AL CABLE,
COMPLETE WITH
PROVISIONS FOR
INTERNAL GROUNDING
OF CABLE CONCENTRIC
SHIELD WIRES
(CONDUCTOR OD 1.574" -
1.614", INSULATOR OD
2.87" - 3.23") CONNECTOR
P/N EPPA-047-40/77-
180MFG: RAYCHEM
#EHVS-6923W-C746-
CAVENDORS: ANIXTER;
WESCOLAST UPDATE:
JULY 5, 2005
10 Each TE/RAYCHEM $559.03 12 WEEKS
City of Anaheim
Electrical Connectors, Fuses and Other Components
MA# _____
5. Firm Discount and Pricing Structure: Contractor guarantees that prices quoted are equal to or less than prices quoted to any other local, State or Federal government entity for services of equal or lesser scope. Contractor agrees that no price increases shall be passed along to City during the term of this Contract not otherwise specified and provided for within this Contract.
6. Payment Terms – Payment in Arrears: Invoices are to be submitted in arrears to the user agency/department to the ship- to address, unless otherwise directed in this Contract. Contractor shall reference Contract number on invoice. Payment will be net 30 days after receipt of an invoice in a format acceptable to City of Anaheim and verified and approved by the agency/department and subject to routine processing requirements. The responsibility for providing an acceptable invoice rests with Contractor.
Billing shall cover services and/or goods not previously invoiced. Contractor shall reimburse City of Anaheim for any monies paid to Contractor for goods or services not provided or when goods or services do not meet Contract requirements.
Payments made by City shall not preclude the right of City from thereafter disputing any items or services involved or billed under this Contract and shall not be construed as acceptance of any part of the goods or services.
7. Taxpayer ID Number: Contractor shall include its taxpayer ID number on all invoices submitted to City for payment to ensure compliance with IRS requirements and to expedite payment processing.
8. Payment – Invoicing Instructions: Contractor will provide an invoice on Contractor’s letterhead for goods delivered and/or services rendered. In the case of goods, Contractor will leave an invoice with each delivery. Each invoice will have a number and will include the following information:
a. Contractor’s name and address
b. Contractor’s remittance address, if different from 1 above c. Contractor’s Taxpayer ID Number
d. Name of City Agency/Department
e. Delivery/service address
f. MA # ______
g. Agency/Department’s Account Number
h. Date of order
i. Product/service description, quantity, and prices
j. Sales tax, if applicable
k. Freight/delivery charges, if applicable
l. Total