REMOTEC, INC. SERVICE DEPARTMENT QUOTE Date: 10-22-2024 353 J.D. Yarnell Pkwy Terms: Net 30 Days
Clinton, TN 37716
Phone: (865) 621-0391 Prices are F.O.B. Clinton, TN
Fax: (865)
E-mail: [email protected] Delivery: TBD at the time of order Attn: Brad Callahan
This pricing is valid for 90 days.
CMPNY: Bakersfield Police Department
ATTN: Capt. Burdick ROBOT MODEL: Andros F6B to Spartan
ADDR: ROBOT S/N: FB20978-01Y01521
1601 Truxtun Avenue QUOTE #: 9142
Bakersfield Ca 93301
PHONE: 661-326-3972 RMA#
FAX:
Email: [email protected]
PAGE 1 OF 1
ITEM DESCRIPTION PART NO. QTY. UNIT PRICE TOTAL PRICE
Upgrade F6 SN: E2461-0100 1
A
F6 TO SPARTAN UPG -
RECEIVE, EVAL TEARDOWN -$
LABOR2 7 162.00 $ 1,134.00$
-$
B
Refurb Chassis Components (Lift and Drive
Motor/Gear Package) -$
B1 UPG DRIVE MOTORS - PARTS AND LABOR LABOR2 2 162.00$ 324.00 $ 1 SERVICE GEARS -$
-$
If the robot is not F6B then add: -$
1 Drive Motor Connector (2 required) CON-HDP26-18-6SN 21.00 $ - $ 2 Amplifier Connector (2 required) CON-HDP24-18-6PN 15.00 $ - $ -$
B2 LIFT PACK UPG - PARTS AND LABOR LABOR2 2 162.00$ 324.00 $ 1 SERVICE GEARS -$
B3 IF THE F6 WAS BUILT AFTER AUG 2013,
INCLUDE THE PART BELOW: -$
1 Articulator Motor (2 required) 2463-1064 1,574.00$ - $ If the robot is not F6B then add: -$
1 Lift Drive Plate Assembly (2 required) B2455-1005 552.00$ -$ 2 Lift Bearing Plate (2 required) C2457-1037 154.00$ -$ 3 Membrane Pot (2 required) 2463-1030 133.00$ -$ 4 Wiper Plunger (2 required) 2470-1076 45.00 $ - $ 5 Wiper mount block (2 required) 2463-1077 53.00 $ - $ 6 Spring Retainer (2 required) 2463-1078 30.00 $ - $ F6B to Spartan Vehicle Upgrade
7 LED Lamp Assembly for P/T (requires item 8) C3865-3620 1,944.00 $ - $ 8 LED Lamp Bracket B3865-0183 43.00 $ - $
C
The F6 Upgraded to Spartan Vehicle SPARTAN UPG 0100 1 148,960.00 $ 148,960.00 $ New Electronics Housing -$
New 8 DOF Manipulator -$
Position Feedback with User Presets -$
Cameras -$
- Surveillance color camera with white light and IR LED's and Pan / Tilt (Continous pan) -$
- Gripper palm camera -$
- Front and rear drive cameras -$
- Color arm camera -$
Accessory Interface Mount (includes adapter for legacy
accessories) -$
Vehicle Battery Pack includes 9 BB2590 Batteries -$
Tool Kit -$
Pnuematic Wheel Kit -$
Training at Remotec and Course Fee for Onsite
Final Assy LABOR2 20 162.00 $ 3,240.00$
Testing LABOR2 10 162.00 $ 1,620.00$
Closeout LABOR2 1 162.00 $ 162.00 $
C2
1 Operator Control Unit Includes: 2463-8700-X 1 17,535 $ 17,535 $ - Ruggedized Laptop with Touchscreen -$
- Docking Station -$
-2 BB2590 Battery BATTERY-BR-BB2590 - $
-Pelican Case -$
2 Dual Pan Disrupter Mount Assembly 2470-5220 1 6,220$ 6,220.00$ 3 2 channel STI (4 channel available upon request) INIT-2CH-FX 1 2,416$ 2,416.00$ 4 Tension Roller Spacers B2021-1062 10 32.00$ 320.00 $ 5 Vehicle Charger Assembly CHGR-035 2
C3
1 ORIGINAL F6B Hybrid Radio ** below required -$
2 Freewave Modules RADIO-FW-MM2-MR-R 2 1,102.00$ 2,204.00$ 3 Lexan Covers 2463-8513 2 27.00$ 54.00$
4 NMO 900 LARSEN-NMO 900 2 81.00$ 162.00$
5 Cable SMAJ CBL-SMAJ-MMCXP-01 2 188.00$ 376.00$ 6 Connector SMA CON-SMA-COAX-002 2 35.00$ 70.00$ 7 **ORIGINAL F6B Fiber Optic Cable Reel Assembly (if applicable) - $ **Required for F/O reuse 2463-9626 1 1,091.00$ 1,091.00$ 8 ORIGINAL F6B Camera Extend Assembly 1 - $
9 ORIGINAL F6B Surveillance Pan and Tilt Camera 1 - $
Replacment costs are detailed below. -$
-$
D Optional SPARTAN Upgrade Items:
1 Legacy Switchbox Style Controller 2463-8150 0 9,720.00$ -$ 2 Andros Game Style Controller 2470-8080 0 3,270.00$ -$ 3 24" Touchscreen Monitor MONITOR-15 0 1,191.00$ -$ 4 SPARE Articulator Tracks (4 tracks = one full set) 2463-1013-FT 2 608.00$ 1,216.00$ 5 SPARE Drive Tracks (2 tracks = one full set) B2400-1013-FT 0 293.00$ -$ 6 SPARTAN Wheel Assy. (Tire,Tube and Rim) R 2463-0113 1 135.00$ 135.00$ This assumes the resuse of :
This upgrade also comes with:
Spartan Vehicle Upgrade Includes:
7 SPARTAN Wheel Assy. (Tire,Tube and Rim) L 2463-0114 1 135.00$ 135.00$ 8 SPARE BB2590 Battery BATTERY-BR-BB2590 11 808.00$ 8,888.00$ 9 NEW Vertical Camera Extend Assembly 2463-3080 4,542.00 $ - $ 10 NEW Mast/Arm Pan and Tilt Assembly (if required) 2463-5000 15,908.00 $ - $ 11 Antenna Bracket (required) 2463-8523 0 112.00 $ - $ 12 Thermal Camera for Arm Pan and Tilt Assembly 2463-5375 0 6,994.00 $ - $ 13 Paint/Powder Coat N/A-P1 0 13,681.00 $ - $
14 F6 Style Camera Pan/Tilt Assembly C3865-5030 0 7,452.00 $ - $ E
1 Power Hawk Assembly 2471-7500 39,665$ - $
Includes the following: -$
- Power Hawk Unit POWERHAWK-004 -$
- Power Hawk Kit -$
- Case For Power Hawk CASE-024 -$
2 Rear Receiver Hitch 2455-7580 0 572.00$ -$ 3 Radio Control Assembly, (Includes case) (Requires
video frequency prior to production) 2463-8480-X 0 50,595$ - $ 4 Spartan PS MPU5 Radio Assembly S-Band (Set of
2 and includes integration kit) 2470-8800-21 0 46,664$ - $ 5 Spartan MPU5 Integration Kit Only (does not include
radio) 2470-8800-X1 0 5,156$ - $
6 Range Extender for MPU5 Radio Assembly TBD 0 -$
7 PS MPU5 Single Handheld Kit (S-Band) 2470-8802 0 17,916$ - $ 8 Enet to RJ45 Programming Cable CBL-DATA-2001 0 842$ - $ 9 Stereo Headset ith Dual PTT Coonector Lefthand HEADSET-PS-075-L 0 4,122$ - $ 10 Stereo Headset ith Dual PTT Coonector Rht hand HEADSET-PS-075-R 0 3,872$ - $ 11 MPU5 Pouch MOLLE POUCH-MPU5 0 366$ - $ 12 PTT, Clip, Cables Kit RELAY-WR-PS-03 0 4,716$ - $ 13 BAT-06 BATTERY-BAT-06 0 764$ - $
14 BAT-11 Charger CHGR-BAT-11 0 1,363$ - $ 15 Radio V-Lock Mount ACC-MNT-MPU5-001 0 265$ - $ 16 Radio V-Lock Mount ACC-MNT-MPU5-003 0 579$ - $ 17 Rear Receiver Hitch 2455-7580 0 572.00$ -$ 18 Laser Sight Mount (reuse of Laser Assembly) 2470-5267 2 96.00$ 192.00$ 19 Sighting Kit Mount (reuse of Sighting Camera) 2470-3813 1 151.00$ 151.00$ 20 Laser Assembly 2471-5172 0 505.00$ -$
21 Camera Sighting Kit 2470-3825 0 973.00$ -$ 22 Receiver Grip Assy. (Gripper Block) B2461-5850 0 258$ - $ 23 X-Ray Assembly (fits Golden X-Ray Systems)
Works with drum & "bread-maker" style film 2470-3807 0 1,901$ - $ 24 Contamination Smear Assembly (For swab
sampling) C7045-7600 0 1,190$ - $
25 Dual Pan Disrupter Mount Assembly 2470-5220 0 1,227$ - $ 26 PAN Disrupter DISRUPTER-003** 0 4,150$ - $ 27 PAN Disrupter Kit With Aluminum Stand DISRUPTER-004-A** 0 7,092$ - $ 28 PAN Disrupter, T3, Titanium DISRUPTER-005** 0 5,443$ - $ 29 PAN Disrupter Electric Breech BRCH-ELEC-KIT-PAN 0 4,437$ - $ 30 Dual Disrupter Mount Assembly (for Royal Arms or
Neutrex 29mm/20mm - Please Specify) 2470-6130 0 5,503$ - $ 31 Shock Tube Initiator, Four Channel INIT-4CH-FX 0 3,429$ - $ 32 37mm and 40 mm Breacher Mount Assembly E7055-6090 0 3,892$ - $ 33 Breacher, GL6, 40 mm, rifled barrel BR-GL6-40MM** 0 6,194$ - $ Accessories
34 Breacher, GL65, 40 mm, rifled barrel (long
cartridge) BR-GL65-40MM** 0 5,922$ - $
35 Breacher-L6-37mm, smooth bore BR-L6-37MM** 0 4,877$ - $ 36 Breacher-L8-37mm, smooth bore (long cartridge) BR-L8-37MM** 0 5,026$ - $ 37 BR-SL65-37mm (Sage or Arwen Ammo only) BR-SL65-37MM** 0 3,457$ - $ 38 Electric Breach T3 Disrupter BREACH-ELECT-T3 0 3,817$ - $ 39 Picatinny Rail Claw Assembly D7045-2726 0 1,866$ - $ 40 Picatinn y Rail Cable Cutter Assembly C7040-7030 0 511$ - $ 41 Circular Saw Assembly (Battery included) 7057-7070-1 0 2,175$ - $ 42 Reciprocating Saw Assembly (Battery included) 7057-7080-1 0 2,175$ - $ 43 Drill Assembly (Ba ttery included) 7057-7040-1 0 2,519$ - $ 44 Charge Dropper 2470-3830 0 1,035$ - $
45 BLOCK ACCESSORY TOOL SYSTEM BATS3‐REM‐ANDROS 0 9,112$ - $ 46 Ideal Mini Gander MINIGANDER 0 7,779$ - $ 47 Drawbar Package (Does NOT include receiver
hitch) C2461-7590 0 842$ - $
48 Ideal Electric release HEADD Hitch ( Requires
Drawbar Package) HITCH-001 0 2,219$ - $
49 Water Disrupter Deployer Kit C2461-7585 0 2,232$ - $ 50 Spare Parts Kit (per robot) 2463-0164 0 32,880$ - $ 51 Spartan Arm and Chassis Service Kit 2463-0153 0 1,140$ - $ F Extended Warranty Option -$
1 Year 2 Extended Warranty MAINTENANCE-001 0 5,940.00$ -$ 2 Third Year Extended Warranty Contract MAINTENANCE-001 0 5,940.00$ -$ 3 Fourth Year Extended Warranty Contract MAINTENANCE-002 0 7,587.00$ -$ 4 Fifth Year Extended Warranty Contract MAINTENANCE-003 0 7,587.00$ -$ 5 Sixth Year Extended Warranty Contract MAINTENANCE-004 0 8,667.00$ -$ 6 5 Years of Extended Warranty (Year 2 Through 6) MAINTENANCE-005 0 30,181.00$ -$ G SHIPPING COSTS (location dependant) -$
1 Shipping To and From Remotec N/A 0 - $
2 Shipping from Customer Site to Remotec ONLY N/A 0- $
3 Shipping Remotec to Customer Site ONLY N/A 0- $
4 3 Way Shipping N/A 1 2,652.00 $ 2,652.00 $
5 Reusable Crate (Requires 3 Way Shipping) CRATE-006 1 2,770.00 $ 2,770.00 $ 6 Customer Pickup/Dropoff **NO FEE INCURRED** N/A -$
H Training -$
1 2 Days Operator/Maintenance Training at
REMOTEC (maximum class size is 6 people)
(Included in Item C)
TRAINING-001
0- $
2 2 Days Onsite Operator/Maintenance Training TRAINING-001 1 5,016.00 $ 5,016.00$ (travel cost only-course fee is included in item C) -$
FedEx
Bax
US Mail
ust. Pick-up TOTAL COST 207,367.00$
(1) Prices listed are for sales in U.S.A. only. Export prices are available upon request. (2) Add travel, labor and subsistence costs if training is located at customer's facility. (3) All products have a one-year warranty. Extended Maintenance Contracts are available. (4) Prices are based upon acceptance of REMOTEC's Terms and Conditions (attached). Any deviation from these conditions may result in a price increase.
(5) Pricing does not include any taxes, fees or other related items unless specifically called out.
DOMESTIC SALES TERMS AND CONDITIONS
REV 11 2/13/2024
A. DEFINITIONS
“Seller” means REMOTEC, Inc.
“Buyer” means the other party to this agreement that is purchasing the goods subject to these terms and conditions.
B. ACCEPTANCE/AGREEMENT
All orders are subject to fact ory acceptance. Additional or different terms or any attempt by the Buyer to vary, in any degree, any of the terms of this sales agreement form shall be deemed material and are objected to or rejected, but this sales agreement form shall not operate as a rejection of the Buyer's offer unless it contains variances in the terms of the description, quantity, price or delivery schedule of the goods.
C. LIMITED WARRANTY
Seller covenants and agrees that the work and equipment delivered under this order shall be free from defects in material and workmanship at the time of delivery. Whenever Seller is acting as a reseller of the products of another manufacturer, Seller provides this warranty solely as a “pass-through” warranty on behalf of the original equipment manufacturer (OEM). Seller will, at its sole options, repair, correct, or replace (or facilitate such repair, correction or replacement by the OEM), F.O.B. point of manufacture, any such work or equipment which proves to be defective, provided that Seller is given written notice of any such defect no later than one (1) year after being shipped (as hereafter defined) by Seller. Seller will conduct the defect investigation of the work and/or equipment at the installation site and repair, correct or replace the defective item at such site or at its designated facility. Repair correc tion or replacement in the manner provided above shall constitute complete fulfillment of all Seller's obligations under this a ssurance. Such assurance shall not apply to design or to any equipment or parts which havebeen subjected to accident, misuse or unauthorized alteration, to normal wear (which includes components with innately limited life), or to defects caused by not complying with Seller's installation and service requirements (if the failed equipment or parts were not installed by Seller).
This assurance shall apply to and include the correction of Technical Data pertinent to defective work and equipment to the extent-delineated hereinabove, but in no event to include computer software.
The product may contain reconditioned material. Reconditioned material meets or exceeds all required specifications and is fully covered under the product warranty.
If the repair, correction or replac ement of work, or equipment is not within the scope of this clause, then Seller shall require a separate purchase order from the Buyer perform the work.
The warranty provided by Seller her ein is exclusively limited to the products manufactured by Seller, specifically the
REMOTEC® ANDROS Robot. Warranties, if any, associated
with all other products are exclusively and expressly limited to those warranties provided by the manufacturers of such products which are by their terms available to Seller'scustomers.
The installation or use of any third-party accessory, assembly, radio and or tool not tested and approved by Seller’s for use on Seller products will cause the warranty on the Seller’s products to be voided.
THE FOREGOING COVENANTS ARE EXCLUSIVE AND ARE
IN LIEU OF ANY WARRANTY OF MERCHANTABILITY,
FITNESS FOR PURPOSE, OR OTHER WARRANTY OF
QUALITY, WHETHER EXPRESS, STATUTORY OR IMPLIED.
IN NO EVENT SHALL SELLER BE LIABLE FOR SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
D. CANCELLATION/TERMINATION
Contract may be terminated at any time by either Party by providing a 90-day written notice of termination. As such, the Contract shall terminate with no further financial obligation of the Customer with respect to payment of obligation due after 90 days from the date of such notice.
E. PROPRIETARY INFORMATION
All drawings, diagrams, specif ications, and other materials furnished by Seller and identified as proprietary, relating to the use and service of articles furnished hereunder and the information therein, are proprietary to Seller (or in cases where Seller is acting as a reseller, such information is proprietary to the OEM). Buyer may not reproduce or distribute such materials except to Buyer's employees who may use the articles as part of their duties. Seller will treat dr awings, specifications, or data furnished by Buyer in connection wi th this order as proprietary, when identified as such, in connection with this purchase.
F. DELIVERY/ACCEPTANCE
The promised delivery date is t he best estimate possible based upon current and anticipated manufacturing capabilities of when the product will be shipped. Seller assumes no liability for loss, damage, or consequential damages due to delay.
G. CLAIMS/NOTICE OF DEFECTS
Failure of the Buyer to object in writing to any merchandise within 30 days after receipt thereof will constitute complete acceptance by Buyer of such merchandise. Rejected material must be returned to Seller, F.O.B. Origin, within 45 days after receipt and with prior authorization from Se ller. Seller may (at its option) recondition or replace the reject ed material to meet Buyer's specifications within a reason able time period after receipt.
Claims for shipping damage must be made with the carrier.
H. FORCE MAJEURE
Fulfillment of this order is contingent upon the availability of materials. Seller shall not be liable for any delay in delivery or for non-delivery in whole or in part caused by the occurrence of any contingency beyond the control of either Seller or suppliers to Seller including but not limited to war, sabotage, acts of civil disobedience, failure or delay in transportation, act of any Government or agency or subdivi sion thereof, judicial action, labor dispute, fire, accident, explosion, epidemic, quarantine, restrictions, storm, flood, earthq uake, acts of God, shortage of labor, fuel, raw material or machinery, or technical failure where Seller has exercised ordinary care in the prevention thereof.
DOMESTIC SALES TERMS AND CONDITIONS
REV 11 2/13/2024
I. PAYMENT TERMS
Domestic:
For purchase orders less than a $100K, payment terms are net 30 days upon receipt of invoice.
For purchase orders greater than $100K, Buyer has two options for payment and must select one upon Seller’s receipt of the order.
Option 1: 60% of contract value due upon receipt of contract and the remaining 40% due within 30 days after the entire order is completed and shipped.
Option 2: Upon successful inspection of each completed
product (robot, radio, camera, laser assembly, disruptor, etc.) at Seller’s location, invoice will be submitted to the Buyer for payment due within 30 days.
Seller reserves the right to assess late charges on US accounts due past 30 days at the rate of 18% per annum except to the extent restricted by applicable law. If at Buyer’s request or to meet Buyer’s requirements, training is scheduled to occur more than 30 days after vehicle/product completion, Seller may, at its discretion, charge Buyer a storage fee of $50.00 per month per vehicle, or $50.00 per month per other end item, and assess late charges in accordance with those terms as stipulated herein.
International:
All payments to Seller are required to be fully paid in advance at the time of contract acceptance by Seller. If a Reseller, payment terms are 60% of contract value due upon contract acceptance by Seller, and the remaining 40% due within 30 days of
successful inspection of completed product at Seller’s location for all international orders with a value greater than $1,000 US.
Late charges will be assessed on international accounts due past 30 days at the rate of 20% per annum.
J. REMEDIES IN THE EVENT OF
CANCELLATION OR DEFAULT
In the event the Buyer cancels this order, or becomes overdue on its account payable to Seller by failing to pay for this order when due in accordance with the terms hereof, in addition to the charges assessed to the Buyer pursuant to Paragraphs D and I of this Agreement, the Buyer shall be required to pay all costs of collection, including, whether suit be brought or not, attorney fees, court costs, collection expenses, and other expenses which Seller may incur or pay in the prosecution of defense of its rights hereunder, whether in judicial pr oceedings at law or in equity, including bankruptcy court and appellate proceedings, or whether out of court.
K. GENERAL PROVISIONS
Any cause of action arising from this agreement, or breach of it, must be commenced after the cause of action occurs within the statute of limitations period allowed under applicable law. Seller reserves the right to correct any stenographical or clerical errors in any of the writings issued by it. The terms and conditions of sale and any description on the face of Seller's writings constitute a complete and exclusive statement of the terms and conditions of the sale of the goods by Seller to Buyer. Buyer may not assign any rights to, or delegate any performance owed under the agreement without the written consent of Seller, which shall not be unreasonable withheld.
L. LIMITATION OF LIABILITY
Notwithstanding any contrary provision contained in this or any other agreement, Seller shall not be responsible to Buyer in contract or tort (including negligence) or otherwise for any indirect, incidental, special or consequential damages of whatsoever nature, or for attorney's fees, loss of use, loss of market share, or lost profits however these are characterized.
Seller shall not be liable to Buyer for an amount, which in combination with all claims by Buyer against Seller under this agreement exceeds the value of this sales agreement. In any event, the liability of Seller to Buyer, whether in contract, tort (including negligence) or under any warranty, or otherwise, is exclusively limited to the remedies expressly provided under the terms of this agreement, in lieu of any and all other remedies at law or in equity.
M. COMPLIANCE WITH LAW
Buyer agrees to comply with all applicable U.S. Government, state, and local statutes, laws, and regulations, including without limitation the Arms Export Control Act, Foreign Corrupt Practices Act, Federal Aviation Administra tion (FAA) regulations on the use and operation of Unmanned Aircraft Systems (UASs), and all applicable export regulations, and hereby agrees to indemnify and hold harmless Seller from any and all liability, loss, or damage caused by Buyers' violation of any such statutes, laws, or regulations.
N. INDEPENDENT CONTRACTOR
Under the provisions of this Agreement, the parties shall act solely as independent contractors, and nothing contained herein, express or implies, shall at any time be construed to create any other relationship.
O. APPLICABLE LAW
This Agreement shall be governed by, and construed in
accordance with, the laws of the State of Tennessee, except with regard to its rules concerning choice of law.
P. SHIPPING POINT
All goods are shipped FOB Clinton, Tennessee 37716, United States of America.
Q. BUYER’S RESPONSIBLITIES
Buyer agrees to comply with all applicable U.S. Government, state, and local statutes, laws, and regulations, including without limitation the Arms Export Control Act, Foreign Corrupt Practices Act, Federal Aviation Administra tion (FAA) regulations on the use and operation of Unmanned Aircraft Systems (UASs), and all applicable export regulations, and hereby agrees to indemnify and hold harmless Seller from any and all liability, loss, or damage caused by Buyers' violation of any such statutes, laws, or regulations.
Buyer shall be solely responsible for the proper training of personnel, use of all products and shall properly train its operators in the safe use of all products. Seller will not be liable for any damages and improper training of the product, and Buyer hereby agrees to indemnify, defend, and hold harmless Seller from any and all claims, liability, loss, or damage, resulting from the use of any item purchased by Buyer, its officers, directors, employees, subcontractors, agents or any third party. Should the Agency want to liquidate the asset, Buyer will work with the Seller to remove proprietary and ITAR/EAR controlled items.
DOMESTIC SALES TERMS AND CONDITIONS
REV 11 2/13/2024
Buyer may not resell items purchased from Remotec, nor may it pledge any such items as collat eral to secure a third-party loan or other financing, without Seller’s prior written consent.
R. INDEMNIFICATION FOR USE
Each Party shall be responsible for and bear the costs of allclaims including third party claims, liabilities, losses or damages, arising from their respective negligent or
intentional acts or omissions under the Order or use of product(s) delivered under the Order.
S. EXPORT
The Buyer shall not re-export or transfer any export-controlled goods or information (e.g. technical data) from the United States (“U.S.”) to any non-U.S. person, country, government, orentity without first complying with all the requirements of the ITAR or EAR, as applicable. Any Party requesting U.S.
Government authorization to export export-controlled
information provided by the other Party under this agreement must first obtain the disclosing Party’s written consent. Written consent by the disclosing Party, however, shall not relieve the other Party of its obligations to comply with U.S. export control laws and regulations.
T. TITLE AND RISK OF LOSS
Title to all equipment provided hereunder shall pass to Customer upon payment of all amounts due PERATON under this Agreement. Risk of loss shall be borne by PERATON until delivery to the Customer’s site. Customer shall pay any personal property taxes, which may be assessed on the equipment beginning at the time of purchase.