NCL - CA License No. 886430 A, C-33, C-61/D12 (Exp. 10/31/2024) | NV License No. 73374 C-4 DIR Registration #1000013795
NATIONAL COATING & LINING
BY BRANDSAFWAY
26713 Madison Ave
Murrieta, CA 92562
Telephone: (951) 471-3388
Fax: (951) 471-3779
www.nc-lc.com
April 4, 2024 DIR Registration #1000013795
TO: City of Barstow
Quote No.: NCLC – 6875 Revised
Project: Barstow Grit Chamber
Field Coating Proposal
Wesley,
We are pleased to submit our proposal to furnish all labor, materials, tools, equipment, taxes and our standard one million dollar single with two million dollar aggregate and a two million dollar umbrella insurance policy required to perform the work as noted herein.
We note receipt of Addendums: N/A
1. Bid Scope Furnish and install protective coatings.
A. Remove existing lining, apply Armatec 110 to exposed rebar, repair deteriorated concrete and apply 125 mils of Sherwin Williams Polycoat 115 on grit chamber walls and floor. Costs for Payment and Performance Bonds included.
TOTAL: $77,320.00
NOTE: All Exclusions are to be included in the contract unless specifically agreed upon in writing prior to any contract.
EXCLUSIONS:
1. If project exceeds more than one year there will be a surcharge added to the bond cost. Bonding is based upon available bonding capacity. Bonding availability is based upon the surety approval of the terms and conditions of the subcontract agreement and payment and performance bond forms in said subcontract agreement.
2. Providing dehumidification/heating or other controls for the environment to perform painting or surface preparation work.
3. Any repairs required to completed work damaged by others.
4. Moving, handling and/or replacing any architectural, structural, mechanical or electrical items.
5. All disassembly and reassembling of items to be removed for painting and coating to be performed by others.
6. All new ferrous metals are to be properly shop prepared and primed by others (by your fabricator).
7. Coating for Equipment, HVAC or electrical.
8. Testing, removal or disposal of hazardous materials.
9. Touch-up painting of factory finished items or coating for prepackaged equipment.
10. Floor sealer, coating for non-ferrous metals, dissimilar materials, precast structures, hatches, manholes, manhole lids or frames
11. Coating interior, buried or encased pipe.
12. Stenciling, Pipe / Valve / Equipment Identification.
13. Skids, fusion bonded epoxy, powder coat, galvanizing, wax, high temperature, grease, caulking, grout, or shop applied coatings.
14. Removal of coal tar enamel, existing coating or coating of existing surfaces.
15. Bypassing, water infiltration, rechanneling or testing for volatile organic compounds.
16. Grinding of welds, weld splatter and sharp edges.
17. Blasting or removal of shop coatings.
18. Precast structures, FRP linings and panel drawings for plastic liner installation.
19. Builders risk, Explosion, Collapse and Underground Hazards (XCU), and Railroad insurance.
20. Force majeure clauses or any and all third-party inspection services.
21. Slab underlayment's, waterproofing membranes, trench or French drain systems and protection board.
22. Traffic control or traffic markings.
23. Scaffolding
24. Coating of tanks.
NCL - CA License No. 886430 A, C-33, C-61/D12 (Exp. 10/31/2024) | NV License No. 73374 C-4 DIR Registration #1000013795
NATIONAL COATING & LINING
BY BRANDSAFWAY
26713 Madison Ave
Murrieta, CA 92562
Telephone: (951) 471-3388
Fax: (951) 471-3779
www.nc-lc.com
April 4, 2024
Barstow Grit Chamber and sludge Thickener
Field Coating Proposal
Page Two
COMMENTS AND NOTATIONS:
1. Payment terms Net 30 days based on progress billings from the date of our invoice.
2. There is a 30 day pay or a late fee of 1 ½ percent per month interest charge will be applied to any overdue balance.
3. Areas scheduled to receive floor coating are to be free of other trades, stored materials or equipment.
4. Open-air surface preparation and painting practices are figured in our bid.
5. General contractor or owner to provide all necessary permits and fees.
6. One site mobilization and demobilization included. Site mobilization fee will be initially billed at no more than 5% of the total contract value.
7. This proposal is based on working straight time working hours. No overtime or premium time is included
8. General Contractor to release sufficient areas of work to facilitate estimated production rates.
9. General Contractor to provide electricity, clean water and sanitary facilities at no cost to NCLC.
10. Prior to commencement of work structures must be clean and dry.
11. We offer our standard one year warranty; any extended warranty by specifications is between manufacture and owner.
12. Notice to proceed shall allow at least three weeks lead time.
13. Based on mutually agreeable contract terms and conditions.
14. Proposal valid for 120 days.
15. National Coating & Lining Company is SSPC QP-1, QP-2, QP-8 & QP-9 certified.
16. National Coating & Lining Company is a union contractor.
17. Additional mobilizations will be billed at $3,500.00. Standby time will be billed at $600.00 per Hour.
We hope that you find this proposal acceptable and we look forward in working with your company on this project.
Should you have any questions regarding this proposal, please do not hesitate to contact the undersigned.
Very truly yours,
NATIONAL COATING & LINING COMPANY AGREED AND ACCEPTED:
Chris Osburn
Signature: ___________________________________
Chris Osburn
Estimator Name/Title: __________________________________ Office: (951) 290-5412
Cell: (951)387-1790 Date: ___________________________
Fax: (951)471-3779
[email protected]