AZURE PRINTED HOMES PROPRIETARY
azure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Response to Request For Proposal for:
Provision of Tiny Homes, Preparation of Site, Delivery to Site, Installation or Construction of Tiny Homes, and Supportive Services for Unhoused Residents August 5, 2024
azURe
PRINTED HOMES.
Azure Printed Homes, Inc is pleased to submit this Proposal to:
City of Camarillo, CA
ATTN:
James Fowler [email protected]
This document contains confidential proprietary trade secret of Azure Printed Homes, Inc. It is provided on a voluntary basis, in confidence, with the understanding that it will not be disclosed outside the City of Camarillo except as required by law. Azure Printed Homes, Inc asserts that it is exempt from release under the Freedom of Information Act. Disclosure otherwise than as specifically authorized by law may result in criminal penalties pursuant to 18 U.S.C. 1905.
This document includes data that shall not be disclosed outside the City of Camarillo and shall not be duplicated, used, or disclosed, in whole or in part, for any purpose other than to evaluate this proposal or quotation. If, however, a contract is awarded to the offeror as a result of, or in connection with, the submission of this data, the City of Camarillo shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the City's right to use the information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in all sheets.
Copyright Unpublished - 2024. All rights are reserved under the copyright laws by Azure Printed Homes, Inc..
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
gazure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Table of Contents
LETTER OF TRANSMITTAL .3
GENERAL INFORMATION. ...
CITY NEEDS AND PROPOSED SERVICES..... ..11
SCHEDULE..... ...16
INSURANCE .18
COST PROPOSAL ..22
PROPOSED SCHEDULE.. ..25
AZURE SUMMARY. ..27
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
LETTER OF TRANSMITTAL
3 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
g azuRe
PRINTED HOMES.
iny Homes RFP Respons
August 5, 202
Mr. James Fowler
City of Camarillo
601 Carmen Drive
Camarillo, CA 93010
Dear Mr. Fowler,
1 am writing as an authorized representative of Azure Printed Homes, Inc. and Azure Construction, Inc. (collectively referred to as "Azure"). Azure is well positioned, qualified, and experienced in manufacturing tiny homes, preparing the ite, deliver to site, and installing Tiny Homes. We have identified Kingdom Causes, Inc. DBA CityNet as a suitable an qualified partner to provide supportive services, and this proposal is filed jointly with CityNe Azure Printed Homes, Inc. EIN: 88-1535284
18101 South Figueroa Street Gardena, CA 90248
424-298-2674 (Main)
Azure Construction, Inc
A wholly owned subsidiary of Azure Printed Homes, Inc.
California General Contractor License No 1058246, Classification: B esignated Azure Signaton
ene Eidelman Presider
[email protected]
310-525-0864 (Mobile)
Causes, Inc. DBA CityNet is in their proposal on page 4.
We are excited to partner with the City of Camarillo and CityNet in the provision of tiny homes and services outlined in this FP and are grateful for the opportunity to present ourselves as a candidate through this proposal DocuSigned by:
GENE EIDELMAN GENE EIDELMAN
-D859C14740E2466
Authorized Signer Signature Authorized Signer Name
Azure Printed Homes, Inc., 18101 S. Figueroa Street, Gardena, CA 90248
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
GENERAL INFORMATION
5 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azuRe
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Azure Printed Homes, Inc. and its subsidiary Azure Construction, Inc. (collectively referred to as "Azure" or the "Company"), is deeply committed to revolutionizing the construction industry and providing high quality tiny homes for unhoused residents. Our primary focus is on the accelerated and cost-effective construction of tiny homes, ADUs and affordable homes, all while upholding environmental sustainability as a core value. Azure was established in August 2019. In March 2022, the Company patented an innovative process and design that harnesses the potential of 3D printing technology and recycled polymers and fiberglass. This paved the way for commencing manufacturing operations in 2023. The tiny homes will be manufactured in Azure's Gardena factory meeting the requirements of the Build America Buy America Act (BABA). The sitework and installation of the tiny home will be performed by Azure Construction, Inc., a licensed California General Contractor.
Azure's in-house capabilities are extensive, seamlessly integrating every aspect of the construction process, spanning from design and manufacturing to permitting and installation. Our project portfolio is a testament to our versatility, featuring a wide array of structures, from compact backyard studios to ADUs, affordable homes and tiny homes (as shown in pictures below). Azure homes comply with the most recent ANSI A199.5 standards for Recreational Vehicles/Recreational Park Models and are specifically designed for mobility (relocatable), and recycling. To date, we have catered to the needs of over 70 clients. Azure's journey embodies a commitment to reshaping the construction landscape while emphasizing sustainability, efficiency, and excellence. We are located at 18101 South Figueroa Street, Gardena, CA 90248. Office phone number is (424) 298-2674.
6 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
AZURE TEAM QUALIFICATIONS
7 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Ross Maguire, CEO, MS in Civil Engineering from University of Nottingham, 15 years in construction, design, manufacturing and project management.
Gene Eidelman, President, MBA from Pepperdine University, developed over 3,000 residential units and over 50 commercial and educational projects over a 35-year construction and development career.
Eric Corbett, Chief Creative Officer, 30 years of entrepreneurial work in Architecture & Design.
Known for his ability to envision & strategize ground-breaking design concepts, he has led teams to complete internationally award-winning projects with clients that demand fresh perspective.
Ravi Gupta, Director of Engineering, BS Mechanical Engineering, USC, 12 yrs. in production, new technologies & machinery // extensive experience in large format additive manufacturing.
Eli Rogers, Director of Technology, MS Mechanical Engineering, Cal Poly-San Luis Obispo, 10 years in manufacturing & 3D printing.
Erik Padron, Construction Project Manager, 15 years of construction project management experience with Azure Construction and other California General Contractors.
Point of Contact for the City of Camarillo:
Gene Eidelman,
cell phone: (310) 525-0864.
email: [email protected]
8 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
REFERENCES
9 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azuRe
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Reference for CityNet
Reference 1
• Client name: City of Corona
• Address: 400 S. Vicentia Ave, Corona, CA 92882
• Contact person: Karen Roper
Project name: Collaborative homeless services
Dates worked performed: 2018 - present
Summary of scope of services: Shelter Partner, Street Outreach, Housing Navigation, Case Management Reference 2
• Client name: City of Riverside
• Address: 3900 Main Street, Riverside, CA 92522
• Contact person: Michelle Davis
• Project name: Multiple
• Dates worked performed: 2020 - present
• Summary of scope of services: Shelter Operator, Street Outreach, Housing Navigation, Case Mgmt Reference 3
• Client name: City of Anaheim
• Address: 200 South Anaheim Boulevard, Anaheim, CA 92805 • Contact person: Sandra (Sagert) Lozeau
• Project name: Community Care Response Team (CCRT)
• Dates worked performed: 2021 - present
• Summary of scope of services: Anaheim Community Care Response Team - street outreach and citywide dispatched teams to respond to community and 911 calls that are homeless-related References for Azure Printed Homes
Reference 1
Client name: TreeBones Resort
Contact person: John Handy
Dates worked performed: 2023
Summary of scope of services: Tiny Home for a development in Big Sur, CA Client name: Desert Glamping LLC
Contact person: Alex Baytalsky
Dates worked performed: 2024-Present
Summary of scope of services: 30 Tiny Homes for a new development in Joshua Tree, CA Client name: Global Glamping LLC
• Contact person: Devon Towle
Dates worked performed: 2024-Present
Summary of scope of services: 25 Tiny Homes in 6 states 10 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
CITY NEEDS AND PROPOSED SERVICES
11 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Description of Azure's understanding of the City's needs and a plan demonstrating how Azure will satisfy these needs, including whether Azure will provide all or only a portion of the requested services.
1. Manufacturing of six (6) tiny homes to comply with the comply with the most recent ANSI A199.5 standards for Recreational Vehicles/Recreational Park Models by Azure Printed Homes, Inc. The units will contain an in-unit bathroom and efficiency kitchen. The units will be single story. One of the units will be ADA-compliant
2. Preparation of the vacant lot at 2361 Barry St for the operation of the six (6) tiny homes, including any needed utilities by Azure Construction, Inc., a California General Contractor
3. Delivering six (6) tiny homes to 2361 Barry Street within the City of Camarillo by Azure Printed Homes.
4. Installing tiny homes at the designated site by Azure Contruction.
5. Providing supportive services for residents housed in tiny homes is proposed to be performed by Kingdom Causes, Inc. DBA CityNet.
Description of the services Azure and CityNet propose to provide
1. Manufacturing of tiny homes
Our manufacturing facility is 20,000 square feet and we can produce 40 modules per month. Our highly automated facility consists of 3D-printing equipment capable of printing three units a day. and stations for installation of electrical, plumbing, insulation and all other interior finishes. The units will contain an in-unit bathroom and efficiency kitchen. The units will be single story. One of the units will be ADA-compliant. We welcome you to visit our facility between August 12th and 14th, as proposed in the RFP.
Azure facility:
12 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azuRe
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
2. Unit Designs
All units will include electric cooking appliances, refrigerator, small sink, small food preparation counter, modest storage cabinets, modest bathroom with toilet, sink, and shower. HVAC is available as an option.
Below is a design for X-120-we propose to deliver five of these units. 7 6 3/41
4 31/4" 4: 41/21
68.61 1(212×8 11)
8'21/2 - 8'21/2 -
541/2
Li
R'11
13 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Below is a design for X-180, an ADA-compliant unit. We will deliver one of these units. 51180
BATH KITCHEN LIVING SPACE
3. Preparation of the vacant lot at 2361 Barry St, Camarillo, CA Azure Construction, Inc. is equipped with the necessary expertise, resources, and capabilities to ensure the successful installation of our units at your location. Our understanding is that emergency shelter/bridge housing is a by-right use in the esidential Planned Development (RPD) zone, meaning there is no discretionary process required for project approval (n lanning Commission/City Council meeting required for project approval). Design would be provided by Azure. Th proposal includes underground utility connections as needed. The proposal includes allowance for modest landscaping and fencing. Following is a preliminary site plan for the development:
146'3/41
19'11 3/4 13'41/4 13 4 1/4" 13'4 1/4 1341/4 13-41/4
-D/ELL LL.6L /LEL
146'1
4. Delivery
The units will be trucked from Azure's Gardena, CA factory to the site fully assembled on trailers.
5. Installation
Units will be installed on a trailer with carthquake bracing. Units will be connected to existing clectrical power, water and sewer. The unit features an exterior electrical panel, shown below, while all other utility connections will be accessible
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PED HOMES
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Utilities will be seamlessly connected through a user-friendly plug-and-play system. Foundations under the units are available as an option, if they are requested or required. 15 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
SCHEDULE
16 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azuRe
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
• Contract Award: September 11, 2024
• Preparation of plans and specification: October 1-November 30, 2024 • Obtaining of permit from the City of Camarillo: December 1-December 31, 2024 • Site work: January 1-March 31, 2025
• Manufacturing of tiny homes: February 15-March 31, 2025 • Delivery of tiny homes: April 1, 2025
• Installation of tiny homes: April 1-April 15, 2025
17 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
INSURANCE
18 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Our current insurance limits are as following:
Type of Insurance Limits (combined single)
Commercial Gencral Liability $2,000,000 / $4,000,000 Aggregate Business Automobile Liability $1,000,00
Vorkers' Compensation Statutory Requirements
Professional Liability: $2,000,000 (carried by CityNet only) Before the contract is issued, Azure will increase its limits as following:
Type of Insurance Limits (combined single)
Commercial General Liability $2,000,000 / $4,000,000 Aggregate Business Automobile Liability $2,000,000
Workers' Compensation: Statutory Requirements
Professional Liability $2,000,000
Current insurance certificates are attached.
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
& PRINTED HOMES
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
COST PROPOSAL
22 AZURE PRINTED HOMES PROPRIETARY
9 azure printed homes
AZURE PRINTED HOMES PROPRIETARY
1. Providing six (6) tiny homes that are manufactured and comply with the ANSI standards. The units will contain an in-unit bathroom and efficiency kitchen. The units will be single story.
Product Quantity Price per Unit Total
X-120 5 $36,575.00 $182,875.00
X-180 ADA 1 $44,900.00 $44,900.00
SET OF APPLIANCES 6 $2,500.00 $15,000.00
- incl water heater, induction
stove top, undercounter fridge &
nicrowave
STAIRS 5 $1,500.00 $7,500.00
ADA Ramp 1 $5,000.00 $5,000.00
Total for tiny homes $255,275.00
If requested, the additional cost will be as following:
HVAC 6 $3,850.00 $23,100.00
Fire Sprinkler 1 $7,000.00 $7,000.00
(engineering)
Fire Sprinkler (install) 6 $4,900,00 $24,500.00
Total cost for additions, if they are requested: $54,600.00 *Assumes a 1 ½" water main (depending on water pressure)
2. Preparation of the vacant lot at 2361 Barry Street for the operation of the six (6) tiny homes, including any needed utilities.
Product/Service Quantity Price per Unit Total
Civil, Architectural and Structural Plans 1 $30,000.00 $30,000.00 - incl pad design, drainage and hardscaping
Utilities:
Trenching & Backfilling 150 ft $50.00 $7,500.00
1 9 azure printed homes
- Not including any surface finish repair
Water 150 ft $90.00 $13,500.00
Sewer 150 ft $90.00 $13,500.00
Electrical 150 ft $75.00 $11,250.00
Connecting Units 6 $900.00 $5,400.00
Landscaping & Fencing Allowance $20,000.00
Installation:
Supports, Tie Downs & Skirts 6 $8,000.00 $48,000.00
seasemi taundarion work pen tried outs
Total design, utilities and installation (assuming no foundations) $149,150.00 If foundations are required or requested, additional cost is as following:
Foundation Size Quantity Price per Unit Total
9 x 13.5 Slab 5 $9,500.00 47,500.00
9 x 20 Slab for ADA 1 $15,000.00 $15,000.00
Unit
Additional costs for foundations, if they are requested or required: $62,500.00
3. Delivery of six tiny homes to 2361 Barry Street, Camarillo, CA. $5,500.00 Subtotal: $527,025.00
Exclusions: any site work items unless specifically referenced, such as works that might be identified in development of civil plans such as site wide grading, site wide drainage, utility company costs for utility feed and access etc. 2 AZURE PRINTED HOMES PROPRIETARY
& PRINTED HOMES
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
PROPOSED SCHEDULE
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azure
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
1. Contract Award: September 11, 2024
2. Preparation of plans and specification: October 1-November 30, 2024
3. Obtaining of permit from the City of Camarillo: December 1-December 31, 2024
4. Site work: January 1-March 31, 2025
5. Manufacturing of tiny homes: February 15-March 31, 2025
6. Delivery of tiny homes: April 1, 2025
7. Installation of tiny homes: April 1-April 15, 2025
AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
& PRINTED HOMES
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
AZURE SUMMARY
27 AZURE PRINTED HOMES PROPRIETARY
AZURE PRINTED HOMES PROPRIETARY
azURe
PRINTED HOMES.
Tiny Homes RFP Response
August 5, 2024
Summary:
Thank you for the opportunity to submit the proposal in response to your RFP. Azure represents a dynamic and innovative force in the construction industry, poised to deliver high-quality, sustainable, and cost-effective solutions to manufacture, deliver and install six tiny homes. Our units are designed for mobility (relocatable), and recycling. We would welcome your feedback and look forward to giving you a tour of our factory. If you have any questions, please reach out to Gene Eidelman, cell: (310) 525-0864, email [email protected], or Nick Glaser, cell (818) 800- 4338, email [email protected]. Office phone number for both is (424) 298-2674.
CityNet has a history and reputation of being able to deliver quality services for the unhoused under intense community, government, and media scrutiny. In each case, CityNet has been able to staff the programs, intake and manage clients, appease community concerns and fears, satisfy city council requirements and visions, ultimately save the respective cities a lot of money and provide dignified services to the unhoused. Although CityNet's main expertise to provide street-level outreach to those experiencing homelessness, it is in their vision and current practice to utilize both prevention and diversion activities for even greater effectiveness at a fraction of the cost of what it takes to bring someone off the streets and into permanent housing.
28 AZURE PRINTED HOMES PROPRIETARY