CAT
®
ATTACHMENTS
SKID STEER LOADERS
COMPACT TRACK LOADERS
MODELS 250, 255, 260, 265, 270/270 XE, 275/275 XE, 285/285XE CAT
®
ATTACHMENTS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
AUGERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4 DRIVE ASSEMBLIES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4 DRIVES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4 � � � BRACKET � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �4 AUGER BITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5 � � � STANDARD DUTY � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5 � � � INDUSTRIAL � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5 � � � INDUSTRIAL ROCK � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5 � � � TREE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6 � � � ROCK HEAD � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6 � � � MESH GUARD � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6 � � � REPLACEMENT PARTS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6 BACKHOE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 � � � BRACKETS AND KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 3 TON BACKHOE ATTACHMENTS � � � � � � � � � � � � � � � � � � � � � � � � � �7 � � � RIPPER � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 � � � THUMB � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 � � � COUPLER� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �7 � � � AUGER DRIVES – BH130 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8 � � � AUGER ADAPTERS/EXTENSIONS � � � � � � � � � � � � � � � � � � � � � � �8 � � � BUCKETS, DITCH CLEANING – BH130 � � � � � � � � � � � � � � � � � � �9 � � � BUCKETS, HEAVY DUTY – BH130 � � � � � � � � � � � � � � � � � � � � � � �9 � � � BUCKETS, CEMETERY – BH130 � � � � � � � � � � � � � � � � � � � � � � � � �9 � � � COMPACTION WHEELS – BH130 � � � � � � � � � � � � � � � � � � � � � �10 � � � VIBRATORY PLATE COMPACTOR – BH130 � � � � � � � � � � � � � �11 BALE GRABS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �12 BALE SPEARS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �12 BLADES, ANGLE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �13 � � � SNOW AND IMPACT KIT � � � � � � � � � � � � � � � � � � � � � � � � � � � � �13 BLADES, DOZER � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �13 � � � MACHINE INERTIAL MEASUREMENT UNIT � � � � � � � � � � � �13 BLADES, BOX � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14 � � � BOX BLADE KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �14 BLADES, SMART GRADER � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �15 � � � SMART GRADER BLADE KITS � � � � � � � � � � � � � � � � � � � � � � � � �15 � � � MACHINE INERTIAL MEASUREMENT UNIT � � � � � � � � � � � �15 BROOMS, ANGLE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �16 � � � BRISTLES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �16 � � � KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �16 BROOMS, PICKUP � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �17 � � � BRISTLES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �17 � � � KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �17 BROOMS, UTILITY � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �18 � � � KITS/OPTIONS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �18 � � � CUTTING EDGES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �18 INDEX
Throughout the brochure, abbreviations will be used for hydraulic flow capabilities for space constraints� STD Flow will be Standard Flow, HF will be High Flow, High Flow XPS will be HF XPS and High Flow XE will be XE� Attachments are compatible with the Next Generation Cat® Skid Steer Loader and Compact Track Loader models listed on the cover unless otherwise noted� Please contact your local Cat ® dealer for exact compatibility, availability and to request a current price quote�
INDEX
BRUSHCUTTERS, INDUSTRIAL � � � � � � � � � � � � � � � � � � � � � � � � � � � �19 BRUSHCUTTERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �20 BUCKETS� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �21 � � � CONCRETE SLAB � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �21 � � � GENERAL PURPOSE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �21 � � � INDUSTRIAL PERFORMANCE � � � � � � � � � � � � � � � � � � � � � � � � � �21 � � � LIGHT MATERIAL � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22 � � � LOW PROFILE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22 � � � MATERIAL HANDLING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22 � � � MULCH � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22 � � � MULTI PURPOSE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �22 � � � SKELETON � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � SKELETON GRAPPLE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � INDUSTRIAL GRAPPLE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � UTILITY � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � UTILITY GRAPPLE KIT � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � UTILITY GRAPPLE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �23 � � � BUCKET EDGES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �24 � � � BUCKET HARDWARE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �24 � � � BUCKET TOOTH BARS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �25 � � � BUCKET BOLT-ON TEETH � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �25 � � � MIXING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �26 � � � SIDE DISCHARGE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �26 COLD PLANERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �27 � � � WATER TANK KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �28 � � � WATER SPRAY KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �28 � � � DRUMS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �29 � � � BITS/ACCESSORIES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �29 � � � GUIDE BAR AND CHAIN � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �29 COMPACTORS, VIBRATORY DRUM � � � � � � � � � � � � � � � � � � � � � � � �30 FORKS AND CARRIAGES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �31 � � � HEAVY DUTY FORK CARRIAGE � � � � � � � � � � � � � � � � � � � � � � � � �31 � � � HEAVY DUTY FORKS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �31 � � � HYDRAULIC POSITIONER KIT � � � � � � � � � � � � � � � � � � � � � � � � � �31 � � � CARRIAGES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �32 � � � PALLET FORK TINES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �32 � � � PALLET FORK SETS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �32 � � � UTILITY FORKS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �33 � � � UTILITY GRAPPLE FORKS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �33 � � � INDUSTRIAL GRAPPLE FORKS � � � � � � � � � � � � � � � � � � � � � � � � �33 HAMMERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �34 � � � TOOLS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �35 � � � BRACKETS/LINES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �36 MATERIAL HANDLING ARM � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �37 MULCHERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �38 � � � TEETH � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �39 NURSERY PRODUCTS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �40 NURSERY FORKS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �40 STUMP BUCKET � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �41 TREE SCOOP BUCKET � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �41 RAKES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �42 � � � GRAPPLE ROOT RAKES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �42 � � � INDUSTRIAL GRAPPLE RAKES � � � � � � � � � � � � � � � � � � � � � � � � �42 � � � LANDSCAPE RAKES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �42 � � � POWER BOX RAKES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �42 SHEAR � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �43 � � � KIT/BRACKET � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �43 STUMP GRINDERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �44 SNOW PRODUCTS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �45 SNOW BLOWERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �45 � � � KITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �45 SNOW PLOWS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �46 SNOW PLOWS, MULTI-V� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �47 SNOW WINGS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �47 � � � CURB RUNNER KIT � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �47 STRAIGHT SNOW PUSHES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �48 � � � BACK DRAG EDGES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �49 TILLERS, LANDSCAPE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �50 TRENCHERS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �51 � � � CHAINS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �52 � � � CRUMBER ARMS/SHOES � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �53 WHEEL SAWS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �54 � � � WATER SPRAY KITS/BITS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �54 � � � GUIDE BAR AND CHAIN � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �55 � � � SMART CREEP SENSOR � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �55
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
4 ®
AUGER DRIVES
MODEL A23 A41 A68
Overall Height mm (in) 751 (30) 668 (26) 709 (28)
Weight kg (lb) 90 (199) 72 (159) 98 (217)
Drive Shaft Torque
at Max Pressure N·m (lbf) 2304 (1699) 4120 (3039) 6826 (5035) Required Hydraulics STD Flow STD Flow HF/HF XPS
Part Number 225-3895 230-5578 225-8809
Auger Drive Assemblies
AUGER DRIVE ASSEMBLIES
MODEL A23 A41 A68
Overall Height mm (in) 1020 (40) 934 (37) 978 (39)
Weight kg (lb) 192 (423) 166 (366) 182 (401)
Drive Shaft Torque
at Max Pressure N·m (lbf) 2304 (1699) 4118 (3037) 6826 (5035) Required Hydraulics STD Flow STD Flow HF/HF XPS
Part Number 218-3178 219-7706 424-0440
Augers have the right
amount of speed and torque for
maximum productivity and are
used for drilling holes for footings,
fencing, signs, trees and shrubs
in construction, agricultural and
landscaping applications�
AUGER BRACKET
Compatibility A23, A41, A68
Part Number 211-5044
Auger Drives
AUGERS – DRIVE ASSEMBLIES/DRIVES/BRACKET
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
5 ®
Auger Bit
Standard Duty
Auger Bit
Industrial
AUGER BITS – STANDARD DUTY/INDUSTRIAL/REPLACEMENT PARTS AUGER BITS – INDUSTRIAL
Diameter mm (in) 152 (6) 229 (9) 305 (12) 406 (16) 457 (18) Overall Length mm (in) 1224 (48) 1219 (48) 1219 (48) 1221 (48) 1224 (48) Weight kg (lb) 26 (57) 33 (73) 41 (90) 52 (115) 49 (108) Number of Teeth 2 4 4 6 6
Part Number 372-0260 372-0261 372-0262 372-0263 372-0264 AUGER BITS – INDUSTRIAL (CONTINUED)
Diameter mm (in) 610 (24) 762 (30) 914 (36) 1067 (42) 1219 (48) Overall Length mm (in) 1219 (48) 1219 (48) 1219 (48) 1219 (48) 1220 (48) Weight kg (lb) 68 (150) 82 (181) 101 (223) 132 (291) 156 (344) Number of Teeth 8 10 12 16 18
Part Number 372-0265 372-0266 372-0267 372-0268 372-0269 AUGER BITS – STANDARD DUTY
Diameter mm (in) 102 (4) 152 (6) 229 (9) 305 (12) 381 (15) 457 (18) 610 (24) 762 (30) 914 (36) Overall Length mm (in) 1219 (48) 1238 (49) 1238 (49) 1278 (50) 1289 (51) 1278 (50) 1289 (51) 1278 (50) 1278 (50) Weight kg (lb) 18 (40) 23 (51) 34 (75) 46 (101) 50 (111) 65 (143) 92 (203) 128 (282) 173 (381) Number of Teeth pilot only 2 4 4 5 6 8 10 12
Part Number 366-7751 153-4083 153-4084 153-4085 366-7752 153-4086 153-4089 217-3194 153-4091 AUGER BITS – INDUSTRIAL ROCK
Diameter mm (in) 152 (6) 229 (9) 305 (12) 406 (16) 457 (18) Overall Length mm (in) 1222 (48) 1222 (48) 1222 (48) 1221 (48) 1221 (48) Weight kg (lb) 36 (79) 49 (108) 61 (135) 76 (168) 87 (192) Number of Teeth 8 10 12 15 16
Part Number 372-0270 372-0271 372-0272 372-0273 372-0274 AUGER BITS – INDUSTRIAL ROCK (CONTINUED)
Diameter mm (in) 508 (20) 610 (24) 762 (30) 914 (36)
Overall Length mm (in) 1221 (48) 1222 (48) 1222 (48) 1222 (48) Weight kg (lb) 99 (218) 128 (282) 141 (311) 186 (410)
Number of Teeth 17 20 24 26
Part Number 372-0275 372-0276 372-0277 372-0278
Auger Bit
Industrial Rock
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
6 ®
MESH GUARD
Part Number 211-2082
Description Half-door mesh guard mounted to front of cab� Helps protect from flying objects�
AUGER BITS/INDUSTRIAL ROCK/ TREE/MESH GUARD/ROCK HEAD
AUGER BITS – TREE
Upper Diameter mm (in) 610 (24) 914 (36)
Lower Diameter mm (in) 305 (12) 457 (18)
Overall Length mm (in) 1289 (51) 1288 (51)
Weight kg (lb) 74 (163) 140 (309)
Number of Teeth 9 13
Part Number 153-4092 153-4095
Auger Bit
Tree
Auger Bit
Rock Head – Bolt On
AUGER BITS – ROCK HEAD*
Flight Diameter mm (in) 152 (6) 229 (9) 305 (12) 380 (15) 457 (18) 610 (24) Cut Diameter mm (in) 190 (7�5) 266 (10�5) 342 (13�5) 419 (16�5) 495 (19�5) 647 (25�5) Overall Length mm (in) 238 (9) 250 (10) 250 (10) 263 (10) 276 (11) 301 (12) Weight kg (lb) 11 (23) 15 (33) 19 (41) 21 (47) 25 (55) 36 (79) Number of Teeth 8 10 12 14 16 20
Part Number 372-0230 372-0231 372-0232 372-0233 372-0234 372-0235 *Bolt-on rock head used with standard flights.
AUGER REPLACEMENT PARTS AND HARDWARE*
Part Number Description
153-4093 Pilot Point/Bit
7X-2549 Bolt (1× required)
6V-7687 Locknut (1× required)
*Available through Parts only.
REPLACEMENT TEETH AND HARDWARE
(ALL AUGER BITS)*
Part Number Description
153-4094 Standard Duty Tooth
174-9566 Hard Face Tooth (optional)
174-9567 Carbide Inserted Tooth (optional)
6V-8959 Bolt (1× required)
6V-7687 Locknut (1× required)
*Optional replacement teeth available through Parts only.
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
7 ®BACKHOE – BACKHOE/RIPPER/ THUMB/COUPLER/MOUNTING GROUPS
SKID STEER LOADER BACKHOE
MODEL BH130
Max Digging Depth mm (in) 2972 (117)
Operating Weight kg (lb) 1055 (2326)
Overall Length mm (in) 2210 (87)
Overall Operating Height mm (in) 3723 (147)
Required Hydraulics (machine) STD Flow
Auxiliary Hydraulics (stick) Yes
Smart Attachment Recognition Yes
Part Number 648-2955
Note: All listed backhoe attachments are compatible
with BH130.
Backhoe
Bucket and mounting group sold separately�
Coupler 3 Ton
Mechanical Dual Lock™
444-7494
Pins – Bucket 40 mm (1
�
6 in)
154-2638
Thumb – Hydraulic
452-2740
Ripper – 490 mm (19 in)
453-8570
Backhoes are used in applications
such as digging footings, basements,
drainage ditches, utility trenching,
back-filling and maintaining slopes
and embankments
�
They are ideal for
demolishing concrete when paired
with Cat® B4/B6/H55/H65 hammers�
BACKHOE BRACKETS AND KITS
Part Number Description
643-9467 Backhoe mounting bracket bolted to host machine �
632-6722 Rework kit to convert older BH130 attachment to work
with next generation models
�
Additionally, the skid steer loader backhoe attachment is also compatible with select 3 Ton mini excavator attachments such as the ripper, hydraulic thumb, mechanical Dual Lock™ coupler, augers, buckets, compaction wheels and a vibratory plate compactor�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
8 ® AUGER DRIVES/AUGER ADAPTERS/AUGER EXTENSIONS
Extension – Telescoping
372-0257
1829 mm (6 ft)
AUGER ADAPTERS AND EXTENSIONS
Description Part Number
Adapter, Hex – 50 mm (2 in) to Round – 65 mm (2 9/16 in) 156-6329 Adapter, Round – 65 mm (2 9/16 in) to Hex – 50 mm (2 in) 217-3191 Extension, Telescoping 914 mm (3 ft) 372-0256
Extension, Telescoping 1829 mm (6 ft) 372-0257
Extension, Auger 305 mm (12 in) 156-6328
Extension, Auger 610 mm (24 in) 217-3192
Retention Pin Kit 372-0258
Extension – Telescoping
372-0256
914 mm (3 ft)
Adapter 156-6329
Hex to Round
Adapter 217-3191
Round to Hex
Extension 156-6328
305 mm (12 in)
Extension 217-3192
610 mm (24 in)
Retention pin kit
372-0258
3 TON AUGER DRIVES – BH130
MODEL A23 A41
Overall Height mm (in) 958 (38) 875 (34)
Weight kg (lb) 120 (265) 92 (203)
Drive Shaft Torque at Max Pressure N·m (lbf) 2304 (1699) 4120 (3039) Required Hydraulics STD Flow STD Flow
Part Number 218-3198 220-7137
3 Ton – Auger Drives
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
9 ®
3 TON DITCH CLEANING BUCKETS – BH130
Width mm (in) 1000 (40) 1200 (47) 1200 (47) 1400 (55)
Capacity L (ft3) 136 (4�8) 167 (5�9) 159 (5�6) 197 (7)
Weight kg (lb) 109 (240) 107 (236) 162 (358) 118 (259)
Part Number 279-4322 279-4323 279-4325* 282-9315
*Hydraulic Angling (Requires Aux Lines)
3 TON HEAVY DUTY BUCKETS – BH130
Width mm (in) 305 (12) 406 (16) 457 (18) 508 (20)
Capacity L (ft3) 48 (1�7) 71 (2�5) 82 (2�9) 93 (3�3)
Weight kg (lb) 65 (143) 74 (163) 82 (181) 87 (192)
Part Number 464-9900 464-9901 464-9902 464-9903
3 TON HEAVY DUTY BUCKETS – BH130 (CONTINUED)
Width mm (in) 619 (24) 762 (30) 914 (36)
Capacity L (ft3) 119 (4�2) 159 (5�6) 200 (7�1)
Weight kg (lb) 98 (216) 117 (258) 133 (293)
Part Number 464-9904 464-9905 464-9906
3 Ton
Heavy Duty Bucket
3 TON CEMETERY BUCKET – BH130
Width mm (in) 813 (32)
Capacity L (ft3) 120 (4�2)
Weight kg (lb) 124 (273)
Part Number 415-6725
3 Ton
Cemetery Bucket
3 Ton
Ditch Cleaning Bucket
3 TON BACKHOE BUCKETS – DITCH CLEANING/HEAVY DUTY/CEMETARY
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
10 ®
COMPACTION WHEELS
Cat compaction wheels
provide a low cost option
for trench compaction� The wheels
feature tapered roller bearings and
tampered foot design for smooth
operation� Six to ten passes are usually
adequate to achieve compaction in
normal soil conditions, dependent on
the required compaction levels�
COMPACTION WHEELS – BH130/PIN ON
Machine Class 3–4 Ton 3–4 Ton 3–4 Ton
Overall Width mm (in) 309 (12) 399 (16) 553 (22)
Compaction Width mm (in) 271 (11) 399 (16) 553 (22)
Overall Height mm (in) 806 (32) 846 (33) 846 (33)
Overall Length mm (in) 726 (29) 693 (27) 693 (27)
Weight kg (lb) 162 (357) 224 (494) 266 (586)
Number of Wheels 2 3 4
Number of Pads 16 24 32
Part Number 517-6976 517-6977 517-6978
Pin on Compaction Wheel
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
11 ®VIBRATORY PLATE COMPACTOR
Vibratory Plate
Compactor
3 TON VIBRATORY PLATE COMPACTOR – BH130
MODEL CVP16
Base Plate Width mm (in) 305 (12)
Compaction Area m2 (ft2) 0�19 (2)
Base Plate Length mm (in) 787 (31)
Required Hydraulics STD Flow
Weight kg (lb) 150 (331)
Part Number 612-9616
Lines Group 611-9566
Backfill Blade
611-9623
Swivel Head
265-7461
Bracket
532-9063
Vibratory Plate
Compactors are used for
compacting soil, sand or gravel
prior to pouring concrete or laying
asphalt surfaces and patching�
Their capabilities and lower
investment and maintenance
costs make them popular with
pavers, general contractors and
utility contractors in residential,
commercial or industrial
applications�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
12 ® BALE GRABS/BALE SPEARS
Bale Grabs
BALE GRABS
Max Opening Width mm (in) 1803 (71) 2133 (84)
Internal Width, Arms Closed mm (in) 940 (37) 918 (36)
Overall Width mm (in) 1401 (55) 1401 (55)
Overall Height mm (in) 873 (34) 873 (34)
Overall Depth mm (in) 1150 (61) 1631 (64)
Bale Capacity kg (lb) 1091 (2405) 1091 (2405)
Weight kg (lb) 261 (575) 263 (580)
Required Hydraulics STD STD
Part Number 477-9896 489-0075
Bale Spears – Dual
BALE SPEARS
Tine Configuration Single Single Dual Dual
Tine Length mm (in) 997 (39) 1251 (49) 997 (39) 1251 (49) Overall Depth mm (in) 1186 (47) 1443 (57) 1100 (43) 1347 (53) Overall Width mm (in) 1285 (51) 1285 (51) 1407 (55) 1407 (55) Overall Height mm (in) 570 (22) 570 (22) 1315 (52) 1315 (52) Bale Capacity kg (lb) 909 (2004) 909 (2004) 1364 (3007) 1364 (3007) Weight kg (lb) 70 (154) 72 (159) 118 (260) 121 (267)
Part Number 475-6074 475-6079 475-6070 475-6080
Bale Spears – Single
Bale Grabs easily transport bales of wheat, hay and other materials� The bale grab firmly grasps baled materials, but due to the rounded arm design bales are not damaged� With the ability to pick up bales sitting flat or on their side, the bale grab increases machine versatility in manipulating round or square bales in any position� Bale Spears are designed for loading and carrying round and square baled materials� Bales of wheat, hay and other materials can be transported for livestock feed, bedding and more� Offering optimal rigidity and capacity, the bale spear work tools are designed for a long working life�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
13 ®
MACHINE INERTIAL MEASUREMENT UNIT (IMU) KIT
Part Number Description
642-3881* Includes sensor and harness to be installed on machine �
*Requires 539-9210 blade.
ANGLE BLADE SNOW AND IMPACT KIT
Part Number Description
225-9522 For angle blade part number 177-1989
225-9523 For angle blade part number 177-1990
ANGLE BLADES
Blade Width mm (in) 1829 (72) 2134 (84)
Width Fully Angled mm (in) 1685 (66) 1949 (77)
Length mm (in) 753 (30) 753 (30)
Weight kg (lb) 313 (690) 331 (730)
Required Hydraulics STD Flow STD Flow
Part Number 177-1989 177-1990
Dozer Blade 6-Way
DOZER BLADE 6-WAY
Blade Width mm (in) 2007 (79) 2337 (92) 2337 (92)
Width – Fully Angled mm (in) 1750 (69) 2049 (81) 2049 (81) Length mm (in) 1028 (41) 1028 (41) 1028 (41)
Weight kg (lb) 471 (1038) 528 (1164) 528 (1164)
Required Hydraulics STD Flow STD Flow STD Flow
Smart Attachment Recognition No No Yes
Part Number 541-0940 541-0945 539-9210*
*255, 265, 275/275XE machines only.
DOZER BLADES/SMART GRADING KIT/ANGLE BLADES
Dozer Blades are designed for
rough and finish grading in dirt and
gravel, plus light dozing
�
With their
6-way capabilities, dozer blades are
better suited for finish grade work
in construction and landscaping
applications
�
Required kit to help create smooth grades
faster and with less operator effort. Accurately
detects machine and tool positions for precise
control adjustments.
Snow and Impact Kit
Angle Blade
Machine IMU Kit
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
14 ®
BLADE KITS
Part Number Description
532-5926
BOX BLADE 8-PIN CONTROLLER KIT
Includes strap on five buttons auxiliary control to operate box blade� For use with 8-pin work tool harness on machine side�
532-5927
BOX BLADE 14-PIN CONTROLLER KIT
Includes strap on five buttons auxiliary control to operate box blade� For use with 14-pin work tool harness on machine side�
Box Blade
BOX BLADES/GRADER BLADES/BLADE KITS
BOX BLADES
MODEL BB121 BB124
Working Width mm (in) 2131 (84) 2436 (96)
Overall Width mm (in) 2221 (87) 2526 (99)
Overall Length mm (in) 2062 (81) 2062 (81)
Overall Height mm (in) 2694 (106) 2694 (106)
Weight kg (lb) 907 (2000) 975 (2150)
Required Hydraulics STD Flow STD Flow
Part Number 489-2001 489-2002
Box Blades are designed for
grading and leveling� Each model is
designed to operate both manually
and automatically with the use of
laser or GPS grading systems�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
15 ®
Grader Blade Wing
Grader Blade
SMART GRADER BLADES
MODEL GB120 GB120
with Wings GB124 GB124
with Wings
Blade Width mm (in) 1992 (78) 1992 (78) 2449 (96) 2449 (96) Blade Width – Wings Extended mm (in) 2605 (103) 3061 (121) Overall Length mm (in) 2246 (88) 2246 (88) 2246 (88) 2246 (88) Overall Height mm (in) 1046 (41) 1046 (41) 1046 (41) 1046 (41) Weight kg (lb) 894 (1971) 1000 (2205) 934 (2059) 1040 (2293) Required Hydraulics STD Flow STD Flow STD Flow STD Flow Smart Attachment Recognition Yes Yes Yes Yes
Part Number 575-2080 575-2081 575-2082 575-2083
SMART GRADER BLADE KITS
Part Number Description
583-6638
GRADER BLADE WINGS KIT
Left and right wings – can be added to grader blades
without wings to increase flexibility and add an
additional 600 mm (24 in) to the width of the blade�
MACHINE INERTIAL MEASUREMENT UNIT (IMU) KIT
Part Number Description
585-5125 Includes sensor and harness to be installed on machine�
SMART GRADER BLADES
Smart Grader Blades
bring cross slope to skid steer and
compact track loaders� Great for
cutting, moving and grading dirt,
gravel, sand and any other base
material�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
16 ®
Angle Brooms
Angle Brooms are for clearing parking lots,
industrial plants, mill yards,
airport runways, streets,
driveways and lanes�
ANGLE BROOMS
MODEL BA118 BA118 BA118 BA121 BA121 BA121
Bristle Material Poly/Wire Poly/Wire Poly Poly/Wire Poly/Wire Poly Angling Manual Hydraulic Hydraulic Manual Hydraulic Hydraulic Overall Width mm (in) 2036 (80) 2036 (80) 2036 (80) 2336 (92) 2336 (92) 2336 (92) Sweeping Width mm (in) 1800 (71) 1800 (71) 1800 (71) 2100 (83) 2100 (83) 2100 (83) Height mm (in) 893 (35) 893 (35) 893 (35) 893 (35) 893 (35) 893 (35) Length mm (in) 1560 (61) 1560 (61) 1560 (61) 1560 (61) 1560 (61) 1560 (61) Weight kg (lb) 372 (820) 388 (855) 378 (833) 400 (882) 417 (919) 405 (893) Required Hydraulics STD Flow STD Flow STD Flow STD Flow STD Flow STD Flow Part Number 565-4831 565-4832 565-4833 565-4841 565-4842 565-4843 KITS
Part Number Model Description
618-1570 BA118 Deflector Kit
618-0083 BA121 Deflector Kit
619-4526* BA118/BA121 Water Sprinkler Kit
564-7367 BA118/BA121 Hydraulic Conversion Kit
* Requires cab mounted water tank.
BRISTLES
BROOM
Part
Number POLY STEEL
Cold
Weather
BA118
Part Number 565-4837 565-4839 565-4838
Quantity 19 18 19
BA121
Part Number 562-7622 562-7624 562-7623
Quantity 22 21 22
NOTE: Cold weather bristles are blue poly.
* Part number includes quantity listed. Order two sets in any combination for a complete set.
ANGLE BROOMS/BROOM KITS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
17 ®
PICKUP BROOM KITS
Part Number Description
452-4185*
BP115C/BP118C WATER SPRINKLER KIT
Includes two sprinkler heads, hoses, hardware and quick disconnects� 452-4150 C SERIES GUTTER BRUSH KIT
Left or right side mount
�
100% wire bristles
�
Includes motor, brackets, assembled hoses, and fittings �
*Requires water tank.
Pickup Brooms
PICKUP BROOMS
MODEL BP115C BP118C
Overall Width mm (in) 1990 (78) 2295 (90)
Sweeping Width mm (in) 1524 (60) 1829 (72)
Height mm (in) 872 (34) 872 (34)
Length mm (in) 1837 (72) 1837 (72)
Weight kg (lb) 526 (1160) 570 (1257)
Required Hydraulics STD Flow STD Flow
Part Number 448-5680 448-5690
PICKUP BROOMS/BROOM KITS
Pickup Brooms sweep and deposit
materials into an integrated hopper for easy
removal and dumping
�
BRISTLES
MODEL BP115C BP118C
Part Number Part Number
POLY 562-7602* 562-7612*
COLD WEATHER (Blue) 562-7603* 562-7613*
STEEL 562-7604* 562-7614*
*Kits are 1/2 of a full set. Order two for a full set.
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
18 ®
UTILITY BROOMS
MODEL BU115 BU118 BU121 BU115 BU118 BU121
Bristle Material Poly Poly Poly Poly/Wire Poly/Wire Poly/Wire Overall Width mm (in) 1810 (71) 2115 (83) 2420 (95) 1810 (71) 2115 (83) 2420 (95) Sweeping Width mm (in) 1500 (59) 1800 (71) 2100 (83) 1500 (59) 1800 (71) 2100 (83) Height mm (in) 793 (31) 793 (31) 793 (31) 793 (31) 793 (31) 793 (31) Length mm (in) 1530 (60) 1530 (60) 1530 (60) 1530 (60) 1530 (60) 1530 (60) Weight kg (lb) 430 (948) 485 (1069) 539 (1188) 433 (955) 488 (1076) 542 (1195) Required Hydraulics STD Flow STD Flow STD Flow STD Flow STD Flow STD Flow Part Number 626-4231 626-4232 626-4233 626-4234 626-4235 626-4236
BRISTLES
BROOM Part Number POLY STEEL Cold Weather
BU115 Part Number 562-7602 562-7604 562-7603
Quantity 18 17 18
BU118 Part Number 562-7612 562-7614 562-7613
Quantity 21 20 21
BU121 Part Number 637-4139 637-4141 637-4140
Quantity 24 23 24
NOTE: Cold weather bristles are blue poly.
*Part number includes quantity listed. Order two sets in any combination for a complete set.
KITS
Part Number Model Description
623-4203* BU115/BU118/BU121 Water Sprinkler Kit
623-4226 BU115/BU118/BU121 Gutter Brush Kit
610-5876 BU115/BU118/BU121 Water Tank Kit
618-8953^ BU115/BU118/BU121 Roof Mounting Bracket
Note: Water tank can be tool or cab mounted.
*Water sprinkler kit requires water tank.
^Required for cab mounted water tank.
Utility Brooms
UTILITY BROOOMS CUTTING EDGES
Part Number Description
489-6702 BU115 Cutting Edge – Requires
quantity of 6 bolts (4F-3648)
and 6 nuts (6V-8188)�
489-6703 BU115 Cutting Edge – Requires
quantity of 7 bolts (4F-3648)
and 7 nuts (6V-8188)�
UTILITY BROOMS/BROOM KITS
Utility Brooms sweep and collect
light debris on smooth surfaces in forward
or reverse travel� Recommended for spoil
removal during cold planing applications�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
19 ®
BROOM WATER TANK KITS/INDUSTRIAL BRUSHCUTTERS
Industrial Brushcutters
INDUSTRIAL BRUSHCUTTERS
MODEL BRX118 BRX318 BRX418
Overall Width mm (in) 1911 (75) 1911 (75) 1911 (75)
Cutting Width mm (in) 1829 (72) 1829 (72) 1829 (72)
Maximun Cutting Diameter mm (in) 203 (8) 203 (8) 203 (8) Overall Height mm (in) 733 (29) 733 (29) 733 (29)
Overall Length mm (in) 2170 (85) 2170 (85) 2170 (85)
Weight kg (lb) 1072 (2363) 1072 (2363) 1072 (2363)
Required Hydraulics STD Flow HF XPS XE
Part Number 610-2760 610-2770 610-2780
Industrial
Brushcutters are designed
for land management, utilities,
site prep and maintenance work
for brush, small trees and dense
vegetation�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
20 ®
BRUSHCUTTERS
MODEL BR115 BR117 BR118 BR120 BR318 BR320
Overall Width mm (in) 1575 (62) 1727 (68) 1880 (74) 2025 (80) 1880 (74) 2025 (80) Cutting Width mm (in) 1524 (60) 1676 (66) 1829 (72) 1981 (78) 1829 (72) 1981 (78) Maximum Cutting Diameter mm (in) 76 (3) 76 (3) 76 (3) 76 (3) 76 (3) 76 (3) Overall Height mm (in) 542 (21) 542 (21) 542 (21) 542 (21) 542 (21) 542 (21) Overall Length mm (in) 1854 (73) 2007 (79) 2159 (85) 2346 (92) 2159 (85) 2346 (92) Weight kg (lb) 426 (939) 462 (1019) 496 (1093) 527 (1162) 502 (1107) 533 (1175) Required Hydraulics STD Flow STD Flow STD Flow STD Flow High Flow HF XPS Part Number 610-2670 610-2680 610-2690 610-2700 610-2710 610-2720
BRUSHCUTTERS
Brushcutters are used for
clearing overgrowth from highway
medians, utility easements and for
initial land clearing for housing,
parks and recreational areas�
Brushcutter
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
21 ®
GENERAL PURPOSE BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 1576 (62) 1730 (68) 1883 (74) 2036 (80) 2188 (86) Capacity m3 (yd3) 0�36 (0�47) 0�4 (0�52) 0�44 (0�58) 0�48 (0�63) 0�63 (0�82) Height mm (in) 426 (17) 426 (17) 426 (17) 426 (17) 469 (19) Length mm (in) 708 (28) 708 (28) 708 (28) 708 (28) 797 (31) Weight kg (lb) 200 (441) 250 (551) 271 (598) 286 (631) 328 (723) Part Number 279-5365 279-5369 279-5373 279-5377 296-8192 BUCKETS – CONCRETE SLAB/GENERAL PURPOSE/INDUSTRIAL PERFORMANCE GENERAL PURPOSE BUCKETS with BOLt-ON tEEth
Width mm (in) 1576 (62) 1730 (68) 1883 (74) 2036 (80) 2188 (86) Capacity m3 (yd3) 0�36 (0�47) 0�4 (0�52) 0�44 (0�58) 0�48 (0�63) 0�63 (0�82) Height mm (in) 426 (17) 426 (17) 426 (17) 426 (17) 469 (19) Length mm (in) 708 (28) 708 (28) 708 (28) 708 (28) 797 (31) Weight kg (lb) 185 (408) 231 (509) 249 (549) 264 (582) 304 (670) Part Number 279-5366 279-5370 279-5374 279-5378 296-8191 General Purpose Bucket with
Bolt-On Teeth
General Purpose Bucket with
Bolt-On Cutting Edge
INDUSTRIAL PERFORMANCE BUCKETS with BOLT-ON CUTTING EDGE Width mm (in) 1730 (68) 2036 (80) 2340 (92)
Capacity m3 (yd3) 0�52 (0�68) 0�62 (0�81) 0�72 (0�94)
Height mm (in) 568 (22) 566 (22) 566 (22)
Length mm (in) 1022 (40) 1022 (40) 1022 (40)
Weight kg (lb) 318 (701) 353 (778) 388 (855)
Part Number 532-7738 532-7744 532-7750
Industrial Performance Buckets
with Bolt-On Cutting Edge
INDUSTRIAL PERFORMANCE BUCKETS with BOLt-ON tEEth
Width mm (in) 1730 (68) 2340 (92)
Capacity m3 (yd3) 0�52 (0�68) 0�72 (0�94)
Height mm (in) 551 (22) 550 (22)
Length mm (in) 1092 (43) 1092 (43)
Weight kg (lb) 301 (664) 361 (796)
Part Number 532-7739 532-7751
Industrial Performance Buckets
with Bolt-On Teeth
Concrete Slab Bucket
CONCRETE SLAB BUCKET with BOLT-ON TEETH
Width mm (in) 607 (24)
Maximum Slab Thickness mm (in) 202 (8)
Height mm (in) 460 (18)
Length mm (in) 1332 (52)
Weight kg (lb) 210 (463)
Part Number 598-2232
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
22 ®
Material Handling Buckets
MATERIAL HANDLING BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 2185 (86) 2490 (98) 2642 (104)
Capacity m3 (yd3) 1�07 (1�4) 1�25 (1�63) 1�33 (1�74)
Height mm (in) 757 (30) 757 (30) 757 (30)
Length mm (in) 1031 (41) 1031 (41) 1031 (41)
Weight kg (lb) 365 (805) 400 (882) 418 (922)
Part Number 472-2546 472-2548 469-0774
LOW PROFILE BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 1421 (56) 1576 (62) 1730 (68) 1883 (74) 2035 (81) 2187 (86) Capacity m3 (yd3) 0�27 (0�35) 0�31 (0�4) 0�34 (0�44) 0�37 (0�48) 0�42 (0�55) 0�45 (0�59) Height mm (in) 551 (22) 557 (22) 557 (22) 557 (22) 559 (22) 559 (22) Length mm (in) 750 (29�5) 750 (29�5) 750 (29�5) 750 (29�5) 753 (29�6) 753 (29�6) Weight kg (lb) 163 (359) 189 (417) 215 (474) 231 (509) 286 (631) 302 (666) Part Number 615-5337 615-5339 615-5343 615-5346 615-5353 615-5357 Light Material Buckets
LIGHT MATERIAL BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 1883 (74) 2036 (80) 2185 (86) 2490 (98)
Capacity m3 (yd3) 0�69 (0�9) 0�75 (0�98) 0�84 (1�1) 0�93 (1�22) Height mm (in) 695 (27) 695 (27) 695 (27) 695 (27)
Length mm (in) 828 (33) 828 (33) 828 (33) 828 (33)
Weight kg (lb) 302 (666) 320 (706) 339 (747) 373 (822)
Part Number 279-5420 279-5425 279-5430 296-7597
Mulch Bucket
MULCH BUCKET with BOLT-ON CUTTING EDGE
Width mm (in) 1431 (56)
Capacity m3 (yd3) 0�76 (1�0)
Height mm (in) 811 (32)
Length mm (in) 1229 (48)
Weight kg (lb) 375 (827)
Part Number 631-9965
BUCKETS – LIGHT MATERIAL/LOW PROFILE/MATERIAL HANDLING/MULTI PURPOSE Low Profile Buckets with
Bolt-On Cutting Edge
MULTI PURPOSE BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 1576 (62) 1730 (68) 1883 (74) 2036 (80) 2188 (86) Capacity m3 (yd3) 0�3 (0�39) 0�34 (0�44) 0�37 (0�48) 0�4 (0�52) 0�43 (0�56) Height mm (in) 388 (15) 388 (15) 388 (15) 388 (15) 388 (15) Length mm (in) 724 (29) 724 (29) 724 (29) 724 (29) 724 (29) Weight kg (lb) 386 (851) 411 (906) 436 (961) 461 (1016) 486 (1071) Part Number 431-5570 426-6490 426-6536 426-6548 426-6558 Multi Purpose Buckets with
Bolt-On Cutting Edge
MULTI PURPOSE BUCKETS with BOLT-ON TEETH
Width mm (in) 1576 (62) 1730 (68) 1883 (74) 2036 (80) 2188 (86) Capacity m3 (yd3) 0�3 (0�39) 0�34 (0�44) 0�37 (0�48) 0�4 (0�52) 0�43 (0�56) Height mm (in) 388 (15) 388 (15) 388 (15) 388 (15) 388 (15) Length mm (in) 696 (27) 724 (29) 724 (29) 724 (29) 724 (29) Weight kg (lb) 371 (818) 394 (869) 416 (917) 440 (970) 462 (1019) Part Number 423-4287 426-6487 426-6535 426-6547 426-6557 Multi Purpose Buckets with
Bolt-On Teeth
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
23 ®
UTILITY GRAPPLE KIT
Part Number Description
285-6116 One cylinder, one grapple assembly
BUCKETS – SKELETON/INDUSTRIAL GRAPPLE/UTILITY
Skeleton Buckets
Plate Tine Style
SKELETON BUCKETS – PLATE TINE STYLE
Width mm (in) 1869 (74) 2036 (80) 2201 (87) 2368 (93)
Height mm (in) 544 (21) 544 (21) 544 (21) 544 (21)
Length mm (in) 1115 (44) 1115 (44) 1115 (44) 1115 (44)
Weight kg (lb) 348 (767) 378 (834) 403 (889) 429 (946)
Part Number 627-8797 627-8798 627-8801 627-8803
Skeleton Buckets
Rod Tine Style
SKELETON BUCKETS – ROD TINE STYLE
Width mm (in) 2016 (79) 2206 (87) 2397 (94)
Height mm (in) 644 (25) 644 (25) 644 (25)
Length mm (in) 1199 (47) 1199 (47) 1199 (47)
Weight kg (lb) 336 (741) 363 (800) 390 (860)
Part Number 549-6561 549-6563 549-6565
Industrial Grapple Buckets
INDUSTRIAL GRAPPLE BUCKETS
Width mm (in) 1576 (62) 1730 (68) 1883 (74) 2036 (80)
Length mm (in) 749 (30) 749 (30) 749 (30) 749 (30)
Height – Grapples Closed mm (in) 525 (21) 525 (21) 525 (21) 525 (21) Jaw Opening mm (in) 1016 (40) 1016 (40) 1016 (40) 1016 (40) Weight kg (lb) 482 (1063) 504 (1111) 526 (1160) 545 (1202) Required Hydraulics STD Flow STD Flow STD Flow STD Flow Part Number 157-7226 157-7227 158-6095 217-6230
Utility Buckets
UTILITY BUCKETS with BOLT-ON CUTTING EDGE
Width mm (in) 1576 (62) 1730 (68) 1883 (74)
Capacity m3 (yd3) 0�43 (0�56) 0�48 (0�63) 0�52 (0�68)
Height mm (in) 533 (21) 533 (21) 533 (21)
Length mm (in) 789 (31) 789 (31) 789 (31)
Weight kg (lb) 240 (529) 258 (569) 276 (609)
Part Number 285-6095 285-6100 285-6101
Utility Grapple Buckets
UTILITY GRAPPLE BUCKETS
Width mm (in) 1730 (68) 1883 (74)
Length mm (in) 789 (31) 789 (31)
Height – Grapple Closed mm (in) 533 (21) 533 (21)
Jaw Opening mm (in) 902 (36) 902 (36)
Capacity m3 (yd3) 0�48 (0�63) 0�52 (0�68)
Weight kg (lb) 365 (805) 382 (842)
Required Hydraulics STD Flow STD Flow
Part Number 285-6111 285-6112
Utility Grapple Kit
Skeleton Grapple Buckets
SKELETON GRAPPLE BUCKETS
Width mm (in) 1869 (74) 2036 (80) 2201 (87) 2368 (93)
Length mm (in) 1115 (44) 1115 (44) 1115 (44) 1115 (44)
Height – Grapples Closed mm (in) 776 (31) 776 (31) 776 (31) 776 (31) Jaw Opening mm (in) 976 (38) 976 (38) 976 (38) 976 (38) Weight kg (lb) 539 (1188) 556 (1248) 591 (1303) 617 (1360) Required Hydraulics STD Flow STD Flow STD Flow STD Flow Part Number 627-8750 627-8751 627-8752 627-8753
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
24 ®
BUCKET SERRATED EDGES*
Part Number Bucket Width – mm (in) Required Sets of Hardware 319-9599 1576 (62) 8
319-9600 1760 (68) 8
319-9601 1883 (74) 11
319-9602 2036 (80) 11
319-9603 2188 (86) 7
540-3531 2340 (92) 9
491-5963 2490 (98) 13
491-5964 2642 (104) 13
*Please order direct from Parts.
SERRATED EDGE HARDWARE––ONE SET* (REQUIRED)
Part Number Description Quantity
8T-4778 Nut (1×) 1
159-2953 Screw, Flat Head (1×) 1
*Please order direct from Parts.
BUCKET CUTTING EDGES* – STEEL
Part Number Bucket Width – mm (in) Required Sets of Hardware 135-9394 1576 (62) 8
135-9395 1730 (68) 8
135-9396 1883 (74) 11
135-9397 2036 (80) 11
195-5124 2188 (86) 11
538-2280 2340 (92) 9
296-7602 2490 (98) 13
469-4306 2642 (104) 13
*Please order direct from Parts.
BUCKET – CUTTING EDGES/SERRATED EDGES
Cutting Edges
Serrated Edges
Concrete Slab Bucket Plate Tine Skeleton Bucket Multi Purpose Bucket
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
25 ®BUCKET – TOOTH BARS/BOLT-ON TEETH
BUCKET TOOTH BARS – FOR USE WITH BASE EDGE*
Part Number Bucket Width – mm (in) Quantity of Uni Teeth 136-8734 1576 (62) 7
136-8735 1760 (68) 8
136-8736 1883 (74) 8
217-4878 2036 (80) 8
275-5427 2188 (86) 8
566-2844 2340 (92) 8
*Series 1: Please order direct from Parts.
BUCKET TOOTH BARS – FOR USE WITH CUTTING EDGE**
Part Number Bucket Width – mm (in) Quantity of Uni Teeth 159-0330 1576 (62) 7
159-0340 1760 (68) 8
159-0350 1883 (74) 8
195-9160 2036 (80) 8
264-2084 2188 (86) 8
566-1841 2340 (92) 8
**Series 2: Please order direct from Parts.
BUCKET TOOTH BAR MOUNTING HARDWARE*** (REQUIRED)
Part Number Description Quantity
2J-3507 Nut 2
3B-4516 Lock washer 2
5P-8250 Washer 2
8S-9093 Bolt 2
***Please order direct from Parts.
REPLACEMENT BUCKET BOLT-ON TEETH*
Part Number Bucket Width – mm (in)
Required Uni
Teeth per
Bucket
141-4999 1576 (62) 8
141-4999 1730 (68) 8
141-4999 1883 (74) 8
141-4999 2036 (80) 9
141-4999 2188 (86) 9
141-4999 2340 (92) 9
*Please order direct from Parts.
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
26 ®
MIXING BUCKETS
MODEL MB200 MB250
Capacity m3 (yd3) 0�2 (0�26) 0�25 (0�33)
Overall Width mm (in) 1602 (63) 1605 (63)
Height mm (in) 731 (29) 877 (35)
Length mm (in) 694 (27) 814 (32)
Weight kg (lb) 290 (639) 430 (948)
Required Hydraulics STD Flow STD Flow
Part Number 489-2150 489-2200
Mixing Buckets
Side Discharge Bucket
SIDE DISCHARGE BUCKETS
MODEL BD118
SAWDUST
BD121
SAWDUST
BD118
SAND
BD121
SAND
Width mm (in) 1860 (73) 2165 (85) 1860 (73) 2165 (85)
Capacity m3 (yd3) 1�53 (2) 1�78 (2�3) 0�76 (1) 1�02 (1�3) Height mm (in) 1118 (44) 1118 (44) 867 (34) 867 (34)
Length mm (in) 1451 (57) 1451 (57) 1269 (50) 1269 (50)
Weight kg (lb) 535 (1180) 579 (1277) 480 (1058) 522 (1151) Required Hydraulics STD Flow STD Flow STD Flow STD Flow Part Number 477-9895 479-8085 479-8095 479-8105
Side Discharge Buckets
collect and discharge sawdust,
mulch, straw and sand into barns,
stalls and orchards, backfill topsoil
or pea gravel into trenches and
spread silage� The left or right
discharge design eliminates the
need for awkward maneuvering,
saving time�
BUCKET – MIXING/SIDE DISCHARGE
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
27 ®
Cold Planers
COLD PLANERS
MODEL PC104 PC105 PC305 PC306
Working Width mm (in) 350 (14) 450 (18) 450 (18) 600 (24) Overall Width mm (in) 1728 (68) 1728 (68) 1858 (73) 1858 (73) Overall Length mm (in) 1117 (44) 1182 (47) 1248 (49) 1248 (49) Overall Height mm (in) 941 (37) 928 (37) 930 (37) 930 (37) Max Cutting Depth mm (in) 150 (6) 150 (6) 170 (7) 170 (7) Required Hydraulics STD Flow STD Flow HF/HF XPS HF/HF XPS Weight kg (lb) 682 (1504) 739 (1629) 848 (1870) 956 (2108) Part Number 529-5760 529-5770 529-5780 529-5790
COLD PLANERS (CONTINUED)
MODEL PC306 Water PC310 PC306 XD PC310 XD PC406
Working Width mm (in) 600 (24) 1000 (39) 600 (24) 1000 (39) 600 (24) Overall Width mm (in) 1858 (73) 1858 (73) 1858 (73) 1858 (73) 1858 (73) Overall Length mm (in) 1432 (56) 1125 (44) 1576 (62) 1498 (59) 1270 (50) Overall Height mm (in) 930 (37) 935 (37) 1113 (44) 1099 (43) 951 (37) Max Cutting Depth mm (in) 170 (7) 130 (5) 250 (10) 220 (9) 170 (7) Required Hydraulics HF/HF XPS HF XPS HF XPS HF XPS XE
Weight kg (lb) 1218 (2685) 1040 (2293) 1410 (3109) 1741 (3838) 987 (2176) Part Number 529-5791 529-5820 529-5840 529-5850 529-5800
COLD PLANERS
Cold Planers
are designed for small paving jobs
in residential and commercial
applications and are primarily used
to economically restore asphalt
and concrete surfaces�
SMART CREEP SENSOR
Part Number Description
586-6665
Smart Creep senses load on the attachment being operated, and automatically adjusts drive command to keep the attachment running at the most productive speed (can be field installed if not already equipped)� Smart Creep Sensor
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
28 ®
COLD PLANERS (CONTINUED)
MODEL PC406 Water PC408 PC412
Working Width mm (in) 600 (24) 750 (30) 1200 (47)
Overall Width mm (in) 1858 (73) 1858 (73) 1858 (73)
Overall Length mm (in) 1453 (57) 1270 (50) 1140 (45)
Overall Height mm (in) 951 (37) 951 (37) 935 (37)
Max Cutting Depth mm (in) 170 (7) 170 (7) 130 (5)
Required Hydraulics XE XE XE
Weight kg (lb) 1249 (2754) 1045 (2304) 1160 (2557)
Part Number 529-5801 529-5810 529-5830
KITS – WATER SPRAY
Part Number Description
231-2590
PCX03/4/5 WATER SPRAY KIT
Includes two sprinkler heads, hoses, mounting hardware and quick disconnects� For use with PC104B, PC104, PC105, PC203, PC204, PC205, PC205B, PC305B, PC30 5�
231-2591
PCX06/8 WATER SPRAY KIT
Includes three sprinkler heads, hoses, mounting hardware and quick disconnects � For use with PC206,
PC306B, PC306, PC406, PC408B, PC408�
231-2592 PC210/310B WATER SPRAY KIT
Includes four sprinkler heads, hoses, mounting hardware and quick disconnects �
381-8341 PC412B WATER SPRAY KIT
Includes five sprinkler heads, hoses, mounting hardware and quick disconnects �
591-0710 PC310 WATER SPRAY KIT
Includes four sprinkler heads, hoses, mounting hardware and quick disconnects �
591-0712 PC412 WATER SPRAY KIT
Includes five sprinkler heads, hoses, mounting hardware and quick disconnects �
*Requires roof mounted or tool mounted water tank.
KITS – WATER TANK
Part Number Description
591-0703*
PC 160 L (42 gal) WATER TANK KIT
Integrated solution consists of frame with water tank inside with a skid steer coupler interface on the outside
� This replaces the existing skid steer coupler interface on the cold planer� For use on PC104,
PC105, PC305, PC306, PC310, PC408, PC412�
*Requires water spray kit and work tool harness.
Cold Planers with
Water Tank
Water Tank Kit
COLD PLANER WATER KITS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
29 ®
COLD PLANER DRUMS
Part
Number Description – Width Cut Depth
Minimum
Cut Depth
Maximum Bits Compatibility
231-2572 Asphalt – 75 mm (3 in) 50 mm (2 in) 200 mm (8 in) 24 PC104, PC105, PC104B, PC203, PC204, PC205, PC205B
231-2573 Asphalt – 150 mm (6 in) 50 mm (2 in) 200 mm (8 in) 24 PC104, PC105, PC104B, PC203, PC204, PC205, PC205B
231-2574 Asphalt – 200 mm (8 in) 50 mm (2 in) 200 mm (8 in) 36 PC104, PC105, PC104B, PC203, PC204, PC205, PC205B
231-2575 Asphalt – 300 mm (12 in) 50 mm (2 in) 200 mm (8 in) 42 PC104, PC105, PC104B, PC203, PC204, PC205, PC205B
231-2580 Asphalt – 75 mm (3 in) 50 mm (2 in) 200 mm (8 in) 24 PC206, PC305, PC306, PC305B, PC306B 231-2581 Asphalt – 150 mm (6 in) 50 mm (2 in) 200 mm (8 in) 28 PC206, PC305, PC306, PC305B, PC306B 606-2524 Asphalt – 300 mm (12 in) 50 mm (2 in) 215 mm (8�5 in) 42 PC305, PC305B 231-2583 Asphalt – 300 mm (12 in) 50 mm (2 in) 200 mm (8 in) 42 PC206, PC306, PC306B 224-7360 Asphalt – 450 mm (18 in) 0 mm (0 in) 150 mm (6 in) 48 PC105, PC204, PC205, PC205B 231-2586 Asphalt – 450 mm (18 in) 50 mm (2 in) 200 mm (8 in) 48 PC206, PC306, PC306B 224-7384 Asphalt – 600 mm (24 in) 0 mm (0 in) 170 mm (7 in) 60 PC206, PC306, PC306B 467-8067 Fine Tooth Kit – 600 mm (24 in) 0 mm (0 in) 30 mm (1�2 in) 208 PC205, PC205B, PC105 467-8068 Fine Tooth Kit – 600 mm (24 in) 0 mm (0 in) 30 mm (1�2 in) 308 PC206, PC306B, PC306 467-8069 Fine Tooth Kit – 1000 mm (40 in) 0 mm (0 in) 30 mm (1�2 in) 508 PC210, PC310B, PC310 Cold Planer Drum
COLD PLANER DRUMS
BITS/ACCESSORIES
Part Number Description
561-8134 All Purpose bit (asphalt and concrete)
561-8132 Concrete bit
560-2306 Heavy Duty Asphalt bit
226-9308 Block Holder for bit
543-5470 Punch (bit remover)
539-6298 Puller Fork (bit remover)
All Purpose Bit
(Asphalt/Concrete)
Concrete Bit Heavy Duty
Asphalt Bit
GUIDE BAR AND CHAIN
Part Number Description
591-0713
Front guide chain to maintain cut alignment to a reference line� Includes chain, angle bars, eft and right side mounting brackets� For use with any generation or model cold planer�
Guide Bar and Chain
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
30 ®
Vibratory Drum Compactors
VIBRATORY DRUM COMPACTORS
MODEL CV117 CV119
Drum Width mm (in) 1676 (66) 1854 (73)
Overall Width mm (in) 1854 (73) 2032 (80)
Weight kg (lb) 936 (2064) 970 (2139)
Required Hydraulics STD Flow STD Flow
Part Number 231-8600 231-8601
VIBRATORY DRUM COMPACTORS
Vibratory Drum
Compactors
produce a vibratory action and
dynamic force that provides
excellent compaction for soil,
sand or gravel prior to pouring
concrete or laying asphalt
surfaces� They are also ideal
for asphalt patch work�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
31 ®
Heavy Duty Fork Carriage
HEAVY DUTY FORKS – CLASS 2
Tine Length mm (in) 1067 (42) 1219 (48) 1524 (60)
Overall Length mm (in) 1141 (45) 1293 (51) 1598 (63)
Width mm (in) 122 (5) 122 (5) 122 (5)
Height mm (in) 549 (22) 549 (22) 549 (22)
Weight kg (lb) 118 (260) 132 (291) 158 (348)
Part Number 540-1431 540-1432 540-1433
HEAVY DUTY FORK CARRIAGE – CLASS 2
Overall Width mm (in) 1438 (57)
Length mm (in) 277 (11)
Height mm (in) 910 (36)
Weight kg (lb) 145 (320)
Tine Spacing Range mm (in) 414-1266 (16-50)
Part Number 532-7810
Heavy Duty Forks
HEAVY DUTY FORK CARRIAGE/HEAVY DUTY FORKS
KIT – HEAVY DUTY HYDRAULIC POSITIONER
Part Number Description
556-3173 Allows fork tine spacing adjustment from within the machine� For use with heavy duty carriage 532-7810�
Heavy Duty Forks and
Fork Carriage are designed
to meet a wide variety of palletized
material handling needs that are
above what standard duty fork
carriages can handle�
Heavy Duty Hydraulic Positioner
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
32 ®
CARRIAGE/PALLET FORK TINES/PALLET FORKS
CARRIAGES – CLASS 2
Width mm (in) 1270 (50)
Length mm (in) 261 (10)
Height mm (in) 912 (36)
Weight kg (lb) 94 (207)
Max Tine Spacing mm (in) 1008 (40)
Part Number 351-9371
Pallet Forks
PALLET FORK TINES – CLASS 2
Tine Length mm (in) 914 (36) 1070 (42) 1220 (48)
Overall Length mm (in) 979 (39) 1139 (45) 1289 (51)
Width mm (in) 100 (4) 100 (4) 100 (4)
Height mm (in) 541 (21) 541 (21) 541 (21)
Weight kg (lb) 42 (92) 47 (104) 52 (114)
Part Number 195-6943* 195-6942* 195-8545*
*Order two for a pair.
Pallet Fork Tine
Pallet Fork Carriage
PALLET FORK SETS (1 Carriage, 2 Tines)
Tine Length mm (in) 1070 (42) 1220 (48)
Carriage Height mm (in) 934 (37) 934 (37)
Carriage Width mm (in) 1164 (46) 1164 (46)
Tine Width mm (in) 100 (4) 100 (4)
Tine Thickness mm (in) 40 (2) 40 (2)
Operating Weight kg (lb) 186 (410) 195 (430)
Overall Length mm (in) 1332 (52) 1482 (58)
Max Tine spacing (center to center) mm (in) 1008 (40) 1008 (40) Part Number 353-1696 353-1697
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
33 ®
Utility Forks
UTILITY FORKS
Width mm (in) 1676 (66) 1829 (72)
Length mm (in) 924 (36) 924 (36)
Height mm (in) 581 (23) 581 (23)
Tine Diameter mm (in) 32 (1) 32 (1)
Number of Tines 7 9
Weight kg (lb) 198 (437) 220 (485)
Part Number 285-6105 285-6110
Industrial Grapple Forks
INDUSTRIAL GRAPPLE FORKS
Width mm (in) 1676 (66) 1829 (72)
Length mm (in) 927 (37) 927 (37)
Height – Grapples Closed mm (in) 810 (32) 814 (32)
Jaw Opening mm (in) 965 (38) 965 (38)
Tine Diameter mm (in) 45 (2) 45 (2)
Usable Tine Length mm (in) 553 (22) 553 (22)
Number of Tines 9 11
Weight kg (lb) 502 (1107) 548 (1208)
Required Hydraulics STD Flow STD Flow
Part Number 279-5350 279-5360
Utility Grapple Forks
UTILITY GRAPPLE FORKS
Width mm (in) 1676 (66) 1829 (72)
Length mm (in) 939 (37) 939 (37)
Usable Tine Length mm (in) 637 (25) 637 (25)
Tine Diameter mm (in) 32 (1) 32 (1)
Jaw Opening mm (in) 876 (35) 876 (35)
Weight kg (lb) 305 (672) 326 (719)
Required Hydraulics STD Flow STD Flow
Part Number 285-6114 285-6115
UTILITY FORKS/UTILITY GRAPPLE FORKS/INDUSTRIAL GRAPPLE FORKS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
34 ®
HAMMERS
Hammers are high
performance breakers,
designed for maximum
performance on demolition,
construction and road work�
HAMMERS
MODEL B4 B4s B6 B6s
Height Without Tool mm (in) 830 (33) 865 (34) 948 (37) 999 (39) Overall Height mm (in) 1190 (47) 1195 (47) 1375 (54) 1370 (54) Overall Length mm (in) 300 (11�8) 300 (11�8) 316 (12�4) 316 (12�4) Overall Width mm (in) 340 (13) 340 (13) 440 (17) 440 (17) Tool Shaft Diameter mm (in) 53 (2�1) 53 (2�1) 68 (2�7) 68 (2�7) Operating Weight – With Tool kg (lb) 159 (351) 162 (357) 259 (571) 277 (611) Minimum Operating Pressure bar (psi) 103 (1492) 103 (1492) 122 (1775) 122 (1775) Sound – dB 128 124 128 124
Required Hydraulics STD Flow STD Flow STD Flow STD Flow Part Number 532-9104* 532-9204* 532-9106** 532-9206**
*Requires poly door plus hammer-side mounting bracket (small or medium) and connecting lines. **Requires poly door plus hammer-side mounting bracket (large) and connecting lines.
HAMMERS (CONTINUED)
MODEL B8 B8s H55s H65s
Height Without Tool mm (in) 1005 (40) 1044 (41) 784 (31) 953 (38) Overall Height mm (in) 1413 (56) 1402 (55) 1108 (44) 1324 (52) Overall Length mm (in) 316 (12) 316 (12) 451 (18) 451 (18) Overall Width mm (in) 440 (17) 440 (17) 346 (14) 346 (14) Tool Shaft Diameter mm (in) 75 (3) 75 (3) 58 (2�3) 68 (2�7) Operating Weight – With Tool kg (lb) 350 (771) 344 (758) 345 (761) 390 (860) Minimum Operating Pressure bar (psi) 117 (1704) 117 (1704) 100 (1450) 100 (1450) Sound – dB 133 129 120 124
Required Hydraulics STD Flow STD Flow STD Flow STD Flow Part Number 532-9108** 532-9208** 561-2551** 561-2552** **Requires machine-side hammer lines and front guards, plus hammer-side mounting bracket (large) and connecting lines.
Hammers
(Two tools included)
Hammer Tool Kit
(Included with
all hammers)
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
35 ®HAMMER TOOLS
HAMMER TOOLS
Tool B4 B6 B8 H55s H65s
Moil 532-9190 523-3193 532-9120 –– ––
Chisel, Inline 542-1760 523-3191 532-9121 423-8310 423-8307 Chisel, Crosscut 542-1761 523-3197 532-9119 428-8024 428-8022 Cone 542-1758 523-3195 532-9118 423-8312 423-8308
Blunt 542-1759 523-3196 532-9117 423-8314 423-8309
Spade Parallel 582-1497 582-1498 582-1499 433-9655 433-9653 Spade Transverse 582-1502 582-1503 582-1504 433-9654 433-9652 Compacting Plate 582-1492 582-1493 582-1494 433-9648 433-9651 Post Driver –– 582-1506 582-1507 –– ––
MOIL
BLUNT
CHISEL
INLINE
SPADE
PARALLEL
CHISEL
CROSSCUT
SPADE
TRANSVERSE
CONE
COMPACTING
PLATE
POST
DRIVER
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
36 ®
HAMMER BRACKETS/LINES
Part Number Description
532-9240
SKID STEER LOADER BRACKET, LINES, MEDIUM-LARGE
Bracket with skid steer interface, including lines and quick disconnects� For use with B model hammers with drill pattern medium or large�
532-9250
SKID STEER LOADER BRACKET, MEDIUM-LARGE
Bracket with skid steer interface� For use with B and H model hammers with drill pattern medium or large� Requires connecting lines and quick disconnects� 532-9264 B4, B6, B8 HAMMER LINES
Connecting lines, including quick disconnects� Cannot be used with H model hammers� 532-9059
3-TON BRACKET, 40 MM (1�6 IN), SMALL-MEDIUM
For use with BH130 and BH160 and hammers with drill pattern small or medium, pin-on, stick mounted or with Dual Lock™ pin grabber quick couplers� Includes bolts, nuts and bucket pins� 532-9063
3-TON BRACKET, 40 MM (1�6 IN), SMALL-LARGE
For use with BH130 and BH160 and hammers with drill pattern small or large and pin-on stick mounted with 3-ton linkage�
532-9088 3-TON HAMMER LINES
For use with BH130 and BH160�
532-9249
PIN ON SKID STEER LOADER BRACKET
Skid steer loader bracket for use with B4/B6/B8 and H55/H65 flat top, pin-on hammers� Requires bracket 532-9275�
532-9275 3-5 TON BRACKET, MEDIUM-LARGE
Bracket with drill pattern medium-large� For use with flat top, pin-on H55/H65� 269-7271
H55, H65 HAMMER LINES, SKID STEER LOADER
For use with H55/H65 (pin-on/flat top) and 532-9250 skid steer loader bracket, medium-large� Cannot be used with B model hammers�
HAMMER BRACKETS/HAMMER LINES
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
37 ®MATERIAL HANDLING ARM
MATERIAL HANDLING ARM
Overall Height mm (in) 1473 (58)
Overall Width mm (in) 1316 (52)
Retracted Length mm (in) 1016 (40)
Max Horizontal Reach mm (in) 2134 (84)
Max Load Rating kg (lb) 907 (2000)
Weight kg (lb) 127 (280)
Part Number 216-8756
Material Handling Arm
Material Handling Arm
is useful in industrial, construction and agricultural
applications to pick-up, carry and load a variety of
materials and equipment�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
38 ®
Mulchers are designed for high-performance cutting and
mulching vegetation and undergrowth� They reduce saplings, shrubs and trees into mulched material, making them ideal for environmental maintenance, such as creating fire lanes� Other applications include land reclamation, foliage removal from building construction sites, and shredding pruned material and organic waste for biomass production� The bite limiter minimizes stalling of the mulcher and the chisel blade is designed to increase life and serviceability�
MULCHERS
MODEL HM112 HM115 HM215 HM316 HM416 HM418
Overall Width mm (in) 1518 (60) 1758 (69) 1758 (69) 1882 (74) 1882 (74) 2122 (84) Working Width mm (in) 1240 (49) 1480 (58) 1480 (58) 1582 (62) 1488 (59) 1707 (67) Overall Height mm (in) 1281 (50) 1281 (50) 1281 (50) 1481 (58) 1481 (58) 1481 (58) Weight kg (lb) 763 (1682) 818 (1803) 818 (1803) 1342 (2959) 1343 (2961) 1450 (3197) Required Hydraulics STD Flow STD Flow HF HF XPS XE XE
Part Number 475-2750* 475-2760* 475-2770* 475-2780* 475-2790* 475-2800* MULCHERS – BITE LIMITER
MODEL HM316 HM416 HM418
Overall Width mm (in) 1882 (74) 1882 (74) 2122 (84)
Working Width mm (in) 1582 (62) 1582 (62) 1822 (72)
Overall Height mm (in) 1480 (58) 1480 (58) 1480 (58)
Weight kg (lb) 1385 (3053) 1370 (3020) 1504 (3316)
Required Hydraulics HF XPS XE XE
Part Number 551-4680* 551-4690* 551-4700*
*Requires Turbo Guard Kit and Debris Kit on machine.
MULCHERS
Mulcher
Mulcher – Bite Limiter
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
39 ®MULCHER TEETH
MULCHER TEETH*
Part Number Description Model (Quantity)
475-2746 Reversible Chisel Tooth HM112 (30), HM115 (36), HM215 (36) 504-6100 Carbide Tipped Chisel Tooth HM112 (30), HM115 (36), HM215 (36) 475-2813 Rock Resistant Tooth HM316 (34), HM416 (34), HM418 (40) 600-9604^ Chisel Knife Tooth HM316 (34), HM416 (34), HM418 (40) 475-2747 Tooth Kit (pack of 10× 475-2746)
482-1444 Single Retention Bolt HM112 (30), HM115 (36), HM215 (36) 475-2810 Standard Carbide Tooth HM316 (32), HM416 (32), HM418 (38) 475-2811 Right Side Scraper Carbide HM316 (1), HM416 (1), HM418 (1) 475-2812 Left Side Scraper Carbide HM316 (1), HM416 (1), HM418 (1) 475-2819 Tooth Kit (pack of 10× 475-2810)
475-2816 Bolt Kit S/N MH500146 and below HM316 (34), HM416 (34), HM418 (38) 487-2141 Bolt Kit S/N MH500147 and up HM316 (34), HM416 (34), HM418 (38) *Replacement teeth available through Parts/Antares only.
Nut
Chisel Tooth
Adapter
Bolt
Nut
Carbide Tooth Bolt
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
40 ® NURSERY PRODUCTS
NURSERY FORKS
MODEL Manual Hydraulic
Overall Height mm (in) 1427 (56) 1427 (56)
Weight kg (lb) 338 (745) 358 (789)
Usable Tine Length mm (in) 1788 (70) 1788 (70)
Fork Opening Maximum at Tip (Angled) mm (in) 1196 (47) 1196 (47) Fork Opening Parallel Maximum mm (in) 617 (24) 617 (24) Maximum Root Ball Diameter mm (in) 1372 (54) 1372 (54)
Required Hydraulics STD Flow STD Flow
Part Number 604-9810 604-9820
Nursery Forks are designed
to allow pivoting one fork out
for gained maneuverability and
handling capabilities in nursery
and landscaping applications�
Fork tines can be configured
with a manually adjusted fork
or hydraulically side shifting fork
to give greater flexibility when
handling multiple or different
sized root balls�
Nursery Forks
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
41 ®TREE SCOOP BUCKETS/STUMP BUCKET
Tree Scoop Buckets are ideal for removal
or planting all types of trees and shrubs at nursery
sites or in landscaping applications� The spade profile can easily cut through the ground while maintaining
a safe buffer zone around the plant roots, making
transplanting easy �
TREE SCOOP BUCKET
Part Number Weight
kg (lb)
Length
mm (in)
Overall Width
mm (in)
Height
mm (in)
Working Width
mm (in)
604-4903 143 (314) 983 (39) 1148 (45) 594 (23) 920 (36) Stump Bucket is specifically designed for
stump removal, the long narrow design allows
operators to dig closely around and underneath
the root ball for quick and easy displacement�
Serrated bucket edges are designed to cut
through roots�
STUMP BUCKET
Part Number Weight
kg (lb)
Length
mm (in)
Overall Width
mm (in)
Height
mm (in)
Working Width
mm (in)
Number of
Teeth
599-4825 162 (357) 1496 (59) 1168 (46) 526 (21) 300 (12) 3
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
42 ®
INDUSTRIAL GRAPPLE/LANDSCAPE/POWER BOX RAKES
LANDSCAPE RAKES
MODEL LR116 LR119
Working Width mm (in) 1576 (62) 1883 (74)
Raking Width mm (in) 1384 (55) 1665 (66)
Overall Width mm (in) 1683 (66) 1990 (78)
Height mm (in) 989 (39) 989 (39)
Length mm (in) 1620 (64) 1620 (64)
Weight kg (lb) 595 (1312) 653 (1440)
Required Hydraulics STD Flow STD Flow
Part Number 224-9220 224-9221Landscape Rake
Landscape Rakes use the scarifying action of the hardened teeth to pulverize, aerate, level and condition the soil while collecting and depositing rock and debris in the integrated hopper� Industrial Grapple Rakes
INDUSTRIAL GRAPPLE RAKES
Width mm (in) 1829 (72) 2134 (84)
Length mm (in) 1016 (40) 1016 (40)
Height mm (in) 838 (33) 838 (33)
Jaw Opening mm (in) 940 (37) 940 (37)
Weight kg (lb) 485 (1070) 506 (1115)
Required Hydraulics STD Flow STD Flow
Part Number 286-9300 286-9301
POWER BOX RAKES
MODEL PR118 PR118 PR121 PR121 PR123
Angle Control Manual Hydraulic Manual Hydraulic Hydraulic Overall Width mm (in) 2057 (81) 2057 (81) 2362 (93) 2362 (93) 2515 (99) Raking Width at Max Angle mm (in) 1727 (68) 1727 (68) 2007 (79) 2007 (79) 2159 (85) Overall Height mm (in) 847 (33) 847 (33) 847 (33) 847 (33) 953 (38) Weight kg (lb) 408 (900) 427 (941) 465 (1025) 483 (1065) 606 (1336) Required Hydraulics STD Flow STD Flow STD Flow STD Flow STD Flow Part Number 608-0655 608-0650 608-0665 608-0660 608-0670 Power Box Rake
Power Box Rakes
are ideal for clearing and preparing soil, offering
the versatility to de-thatch, remove old lawns
and weeds, grade, level, rake, remove debris
and prepare seedbeds all with one work tool�
GRAPPLE ROOT RAKES
Width mm (in) 1858 (73) 2204 (87) 2334 (92)
Height – Clamp Closed mm (in) 920 (36) 920 (36) 920 (36) Overall Length mm (in) 853 (34) 853 (34) 853 (34)
Maximum Clamp Opening mm (in) 1297 (51) 1297 (51) 1297 (51) Weight kg (lb) 452 (997) 503 (1109) 509 (1122)
Required Hydraulics STD Flow STD Flow STD Flow
Part Number 634-6070 634-6080 634-6090 Grapple Root Rakes
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
43 ®SHEARS
Scrap/Demolition Shear
KIT/BRACKET (REQUIRED)
Part Number Description
441-6167
S308 SKID STEER LOADER CONTROL KIT
Allows switching between 360 degrees rotation and opening/ closing of shear� Includes hydraulic lines with quick
disconnects, hydraulic valve for opening/closing and rotation of shear, and 14-pin harness to operate hydraulic valve�
583-8150 S308 SKID STEER LOADER BRACKET
Allows use of S308 shear on a skid steer quick coupler� Cat Shears rotate 360 degrees for rapid repositioning
and are designed with a straight lower jaw to improve
cutting force�
SCRAP SHEAR
MODEL S308
Height mm (in) 667 (26)
Width mm (in) 390 (15)
Length mm (in) 1709 (67)
Jaw Opening mm (in) 240 (9)
Required Hydraulics STD Flow
Weight kg (lb) 550 (1213)
Part Number 583-8100*
*Requires 441-6167 control kit and 583-8150 bracket�
Skid Steer Loader Bracket
with Control Kit Installed
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
44 ®
Stump Grinders
STUMP GRINDERS
MODEL SG16 SG36
Cutting Depth (below ground) mm (in) 521 (21) 521 (21)
Cutting Height (above ground) mm (in) 470 (19) 470 (19) Overall Height mm (in) 730 (29) 813 (32)
Overall Length mm (in) 1737 (68) 1737 (68)
Overall Width mm (in) 1175 (46) 1175 (46)
Weight kg (lb) 379 (836) 400 (882)
Required Hydraulics STD Flow HF/HF XPS
Part Number 424-0461 424-0460
Stump Grinders
offer the right balance of cutting
wheel speed and torque to make
quick work of most tree varieties�
Stump Grinder
STUMP GRINDERS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
45 ®
SNOW BLOWERS
MODEL SR115 SR118 SR121 SR318 SR321 SR418 SR421
Intake Width mm (in) 1290 (51) 1614 (64) 1942 (77) 1614 (64) 1942 (77) 1614 (64) 1942 (77) Cutting Height mm (in) 867 (34) 867 (34) 867 (34) 867 (34) 867 (34) 867 (34) 867 (34) Maximum Throw m (ft) 12 (40) 12 (40) 12 (40) 12 (40) 12 (40) 12 (40) 12 (40) Overall Width mm (in) 1572 (62) 1877 (74) 2181 (86) 1877 (74) 2181 (86) 1877 (74) 2181 (86) Overall Height mm (in) 1843 (73) 1843 (73) 1843 (73) 1843 (73) 1843 (73) 1843 (73) 1843 (73) Overall Length mm (in) 951 (37) 951 (37) 951 (37) 951 (37) 951 (37) 951 (37) 951 (37) Weight kg (lb) 463 (1021) 478 (1054) 501 (1105) 495 (1091) 518 (1142) 512 (1129) 535 (1180) Required Hydraulics STD Flow STD Flow STD Flow HF XPS HF XPS XE XE Part Number 580-0607* 546-4485* 545-8977* 546-4509* 546-4504* 585-5465* 585-5467* *Requires Work Tool Harness�
Snow Blowers
SNOW BLOWERS/SNOW PERFORMANCE KIT
Snow Blowers are designed
for removing snow from streets,
parking lots, driveways and sidewalks,
making them ideal for various winter
cleanup and maintenance applications�
Snow blowers now come standard
with an adjustable coupler interface
that can be adjusted to three different
heights�
KIT
Part Number Description Compatibility
546-4522
Snow Performance – 2 side cutters, 1 partial impeller/
fan cover, 1 chute front plate, 1 chute non-metallic liner and fixing materials�
All new design
snow blowers
599-0316 Truck Chute – Converts existing chute to improve height and distance of thrown snow�
SR318, SR321, SR418,
SR421 Gen 3
Snow Performance Kit
Truck Chute Kit
Snow Blower Adjustable Coupler
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
46 ®
Snow Plows
SNOW PLOWS
MODEL 1�8 m (6 ft) 2�1 m (7 ft) 2�4 m (8 ft) 2�7 m (9 ft) 3 m (10 ft) Width mm (in) 1826 (72) 2134 (84) 2435 (96) 2743 (108) 3045 (120) Overall Height mm (in) 800 (32) 800 (32) 800 (32) 800 (32) 800 (32) Blade Height mm (in) 797 (31) 797 (31) 797 (31) 797 (31) 797 (31) Length mm (in) 1247 (49) 1247 (49) 1247 (49) 1247 (49) 1247 (49) Weight kg (lb) 450 (992) 477 (1052) 502 (1107) 527 (1162) 552 (1217) Required Hydraulics STD Flow STD Flow STD Flow STD Flow STD Flow Part Number 481-3666 481-3667 481-3668 481-3669 481-3670 Snow Plows employ a robust
design for moving snow with maximum
efficiency and power�
SNOW PLOWS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
47 ®
MULTI V-PLOWS
MODEL 1�5 m (5 ft) 2�1 m (7 ft)
Straight Width mm (in) 1524 (60) 2134 (84)
Length mm (in) 1320 (52) 1320 (52)
Overall Height mm (in) 826 (33) 826 (33)
Weight kg (lb) 290 (639) 426 (939)
Required Hydraulics STD Flow STD Flow
Part Number 542-7309 542-7310
SNOW MULTI-V PLOWS/SNOW WINGS
Multi V-Plows
Snow Wings
SNOW WINGS
MODEL 2�4 m (8 ft) 2�8 m (9 ft)
Working Width – Wings Open mm (in) 4106 (162) 4411 (174) Working Width – Wings Closed mm (in) 2451 (97) 2756 (109) Overall Height mm (in) 915 (36) 915 (36)
Length mm (in) 1705 (67) 1705 (67)
Weight kg (lb) 867 (1911) 885 (1951)
Wing Rotation 180° 180°
Angling – Left/Right of Center 35° 35°
Required Hydraulics STD Flow STD Flow
Part Number 608-7779* 608-7780*
*Requires Work Tool Harness�
CURB RUNNER KIT – SNOW WINGS
Part Number Description
602-7948 Adds protection to the wings to reduce damage and wear from curbs and other obstacles�
Curb Runner Kit
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
48 ®
Straight Snow Push
SNOW PUSHES (CONTINUED)
MODEL 3�05 m (10 ft) 3�66 m (12 ft) 3�66 m (12 ft) 3�66 m (12 ft) Working Width mm (in) 3048 (120) 3658 (144) 3658 (144) 3658 (144) Overall Width mm (in) 3162 (124) 3772 (149) 3772 (149) 3772 (149) Trip Edge Height mm (in) 119 (4�7) –– 119 (4�7) 119 (4�7) Overall Height mm (in) 994 (39) 914 (36) 994 (39) 994 (39) Length mm (in) 1143 (45) 1109 (44) 1143 (45) 1143 (45)
Weight kg (lb) 545 (1202) 432 (952) 611 (1347) 636 (1402) Trip Edge Type Steel Rubber Rubber Steel
Cutting Edge 482-7668 –– 489-3929489-3929 489-3927
Trip Edge Yes No Yes Yes
Part Number 479-8096 509-3707 479-8089479-8089 479-8099
SNOW PUSHES
MODEL 2�44 m (8 ft) 2�44 m (8 ft) 2�44 m (8 ft) 3�05 m (10 ft) 3�05 m (10 ft) Working Width mm (in) 2438 (96) 2438 (96) 2438 (96) 3048 (120) 3048 (120) Overall Width mm (in) 2553 (101) 2553 (101) 2553 (101) 3162 (124) 3162 (124) Trip Edge Height mm (in) –– 119 (4�7) 119 (4�7) –– 119 (4�7) Overall Height mm (in) 914 (36) 994 (39) 994 (39) 914 (36) 994 (39) Length mm (in) 1109 (44) 1143 (45) 1143 (45) 1109 (44) 1143 (45) Weight kg (lb) 353 (778) 470 (1036) 491 (1083) 393 (866) 523 (1153) Trip Edge Type Rubber Rubber Steel Rubber Rubber
Cutting Edge –– 489-3913 489-3921 –– 482-1496
Trip Edge No Yes Yes No Yes
Part Number 509-3705509-3705 479-8115 479-8120 509-3706 479-8086
STRAIGHT SNOW PUSHES
Straight Snow Pushes are designed
to roll and fold snow with a profiled mold board,
maximizing the amount of snow being pushed�
Streamlined box supports ensure that snow
does not cling and a standard trip edge
system protects from unseen obstacles�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
49 ®
SNOW PUSH BACK DRAG EDGES
MODEL 2�5 m (8 ft) 3�1 m (10 ft) 3�7 m (12 ft)
Steel Edge 481-3680 481-3686 481-3689
Rubber Edge 481-3675 481-3676 481-3679
Back Drag Edges
SNOW PUSH BACK DRAG EDGES
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
50 ®
LANDSCAPE TILLERS
MODEL LT114 LT118
Working Width mm (in) 1354 (53) 1848 (73)
Working Depth mm (in) 152 (6) 152 (6)
Overall Width mm (in) 1789 (70) 2272 (89)
Length mm (in) 956 (38) 956 (38)
Height mm (in) 755 (30) 755 (30)
Weight kg (lb) 340 (750) 420 (926)
Required Hydraulics STD Flow STD Flow
Part Number 219-7165 219-0426
Landscape Tiller
Landscape Tillers are designed to
break up and pulverize soil, mix compost
or other materials into existing soil, and
stabilize and level existing terrain in
landscape finish applications�
LANDSCAPE TILLERS
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
51 ®
TRENCHERS
MODEL T109 T109 T109
Side Shift Control Manual Hydraulic Manual
Cutting Width mm (in) 152 (6) 152 (6) 203 (8)
Overall Width mm (in) 1426 (56) 1426 (56) 1426 (56)
Overall Length mm (in) 2348 (92) 2348 (92) 2348 (92)
Overall Height mm (in) 786 (31) 786 (31) 786 (31)
Side Shift Travel mm (in) 419 (17) 419 (17) 419 (17)
Standard Boom Length mm (in) 914 (36) 914 (36) 914 (36) Weight* kg (lb) 459 (1012) 488 (1076) 466 (1028)
Required Hydraulics STD Flow STD Flow STD Flow
With Chain
Standard* 261-4806 261-4859 261-8557
Combo 261-8559 261-8560 ––
Rockfrost 261-8561 261-8562 ––
Terminator 261-8563 261-8564 ––
*Weight with Standard Chain
Terminator
Rockfrost
Combo
Standard
TRENCHERS
Trenchers are used for cutting
narrow straight trenches in soil prior
to laying electrical, telephone and
cable lines, as well as water and
gas pipe�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
52 ®
TRENCHER CHAINS ONLY
MODEL T109 T109 T109 T109 T112 T112
152 mm (6 in) 203 mm (8 in) 254 mm (10 in) 305 mm (12 in) 152 mm (6 in) 203 mm (8 in) Standard 259-0312 258-8644 263-3431 263-3430 189-5956 222-7916 Combo 261-4860 –– –– –– 222-7742 ––
Rockfrost 261-4805 –– –– –– 222-7743 ––
Terminator 243-6349 –– –– –– 262-7624 ––
Combo Carbide –– –– –– –– –– 208-2694
Combo Conical –– –– –– –– 208-2690 208-2693
TRENCHERS/TRENCHER CHAINS
TRENCHERS (CONTINUED)
MODEL T109 T112 T112 T112 T112 T315 T315
Side Shift Control Hydraulic Manual Hydraulic Manual Hydraulic Hydraulic Hydraulic Cutting Width mm (in) 203 (8) 152 (6) 152 (6) 203 (8) 203 (8) 152 (6) 203 (8) Overall Width mm (in) 1426 (56) 1901 (75) 1901 (75) 1901 (75) 1901 (75) 1901 (75) 1901 (75) Overall Length mm (in) 2348 (92) 2705 (107) 2705 (107) 2705 (107) 2705 (107) 3010 (119) 3010 (119) Overall Height mm (in) 786 (31) 786 (31) 786 (31) 786 (31) 786 (31) 786 (31) 786 (31) Side Shift Travel mm (in) 419 (17) 559 (22) 559 (22) 559 (22) 559 (22) 559 (22) 559 (22) Standard Boom Length mm (in) 914 (36) 1219 (48) 1219 (48) 1219 (48) 1219 (48) 1524 (60) 1524 (60) Weight* kg (lb) 495 (1092) 488 (1076) 509 (1121) 518 (1141) 538 (1186) 550 (1212) 584 (1287) Required Hydraulics STD Flow STD Flow STD Flow STD Flow STD Flow HF XPS HF XPS With Chain
Standard* 261-8558 233-2346 241-4252 233-2349 241-4253 424-0471 424-0472 Combo –– 233-2350 241-4254 –– –– 424-0473 ––
Rockfrost –– 241-4251 241-4255 –– –– –– ––
Terminator –– –– –– –– –– –– ––
*Weight with Standard Chain
TRENCHER CHAINS ONLY (CONTINUED)
MODEL T112 T315 T315 T315
254 mm (10 in) 152 mm (6 in) 203 mm (8 in) 254 mm (10 in) Standard 208-2678 189-5957 222-8523 208-2679
Combo –– 222-7747 –– ––
Rockfrost –– 208-2697 –– ––
Terminator –– 262-7623 –– ––
Combo Carbide –– –– 208-2699 ––
Combo Conical –– 208-2695 208-2698 ––
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
53 ®
TRENCHER CRUMBER ARMS
MODEL T109 T112 T315
Part number 264-5714 264-7601 264-7602
Crumber Arm
CRUMBER ARM SHOES
Shoe 152 mm/202 mm
(6 in/8 in)
254 mm/305 mm
(10 in/12 in)
Part number 264-7597 264-7598
CRUMBER ARM AND SHOE
Optional Crumber Arm and Shoe
ensures smooth trench bottom following chain teeth
and consistent placement of excavated dirt�
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
54 ®
WHEEL SAWS (CONTINUED)
MODEL SW380 SW460-80 SW460-160 SW460-200 SW480
Overall Width mm (in) 1655 (65) 1655 (65) 1655 (65) 1655 (65) 1655 (65) Wheel Width mm (in) 250 (10) 80 (3) 160 (6) 200 (8) 250 (10) Overall Height mm (in) 1860 (73) 1765 (69) 1765 (69) 1765 (69) 1860 (73) Length mm (in) 2600 (102) 2417 (95) 2417 (95) 2417 (95) 2600 (102) Weight kg (lb) 1450 (3197) 1440 (3175) 1315 (2899) 1325 (2921) 1450 (3197) Max Cutting Depth mm (in) 800 (32) 600 (24) 600 (24) 600 (24) 800 (32) Required Hydraulics HF XPS XE XE XE XE
Trench Cleaning Device No No Yes Yes No
Part Number 529-5890 529-5863 529-5864 529-5865 529-5891
WHEEL SAWS/WHEEL SAW SPRAY KITS
WHEEL SAW WATER SPRAY KITS
Part Number Description
591-0708
SW345/360 WATER SPRAY KIT
Includes four sprinkler heads, hoses, one
quick disconnect for water and mounting
hardware� Requires cab mounted water tank�
591-0709
SW380/480 WATER SPRAY KIT
Includes four sprinkler heads, hoses, one
quick disconnect for water and mounting
hardware� Requires cab mounted water tank�
Wheel Saw
WHEEL SAWS
MODEL SW345-80 SW345-130 SW360-80 SW360-100 SW360-130 SW360-160 SW360-200 Overall Width mm (in) 1655 (65) 1655 (65) 1655 (65) 1655 (65) 1655 (65) 1655 (65) 1655 (65) Wheel Width mm (in) 80 (3) 130 (5) 80 (3) 100 (4) 130 (5) 160 (6) 200 (8) Overall Height mm (in) 1455 (57) 1455 (57) 1765 (69) 1765 (69) 1765 (69) 1765 (69) 1765 (69) Length mm (in) 2165 (85) 2165 (85) 2417 (95) 2417 (95) 2417 (95) 2417 (95) 2417 (95) Weight kg (lb) 1126 (2482) 1016 (2240) 1440 (3175) 1335 (2943) 1365 (3009) 1315 (2899) 1325 (2921) Max Cutting Depth mm (in) 450 (18) 450 (18) 600 (24) 600 (24) 600 (24) 600 (24) 600 (24) Required Hydraulics HF XPS HF XPS HF XPS HF XPS HF XPS HF XPS HF XPS Trench Cleaning Device No Yes No Yes Yes Yes Yes
Part Number 529-5880 529-5867 529-5860 529-5868 529-5869 529-5861 529-5862 WHEEL SAW BITS*
Part Number Description
222-7571 All Purpose bit
227-7340 Concrete bit
375-7681 Heavy Duty Concrete bit
316-2326 Heavy Duty Asphalt bit
226-9308 Block Holder for bit
104-8591 Punch (bit remover)
8T-4474 Puller (bit remover)
*An inventory holding of at least 100 of each tip is advised.
SKID STEER LOADERS AND COMPACT TRACK LOADERS
ATTACHMENTS
55 ®GUIDE BAR AND CHAIN-SAWS/SMART CREEP SENSOR
GUIDE BAR AND CHAIN
Part Number Description
591-0715 Front guide chain to maintain cut alignment to a reference line� Guide Bar and Chain-Saws
SMART CREEP SENSOR
Part Number Description
586-6665
Smart Creep senses load on the attachment being operated, and automatically adjusts drive command to keep the attachment running at the most productive speed (can be field installed if not already equipped)� Smart Creep Sensor
Preliminary Draft (10-2024)
(Global)
© 2024 Caterpillar� All Rights Reserved� CA T, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission