Republic EVS Received
Cathedral City Fire Department Sent for Approval
32100 Desert Vista Rd, Rec'd Approved
Cathedral City, CA 92234 Scheduled
Craig Sanborn GPC Number:
[email protected]
760-770-8200
Garett Adelman
To be assigned by MEDIX Form Revised 5/15/2023
QTY STD/OPT
1 15-M2-FG
-
109003
01-
1 100040
1 STD
1 STD
1 STD
1 100010
02-
Note: Weld
Shop
1 STD
1 STD
1 STD
1 STD
1 STD Pass-Thru: With accordion boot. Sliding, latching polycarbonate window.
See special roof print for rooftop condenser, Coleman A/C and special length assist rail locations/backer plates.
See special front wall for opticom and Pioneer light locations.
This chassis is equipped with a Gasoline Exhaust System to meet the EPA standards for Gasoline exhaust emissions
Anti-Theft Device: IdleLock Ignition Security System, for Ford F-Series Chassis Only. Locate activation button to the right side of the steering wheel.
Camera System: Ford "F" 'Series Super Duty OEM Surface Mount Back-Up Camera and Harness tied into OEM display in dash. Option Code 872. Includes RVS-MV3-IR camera and RVS-OA08 Harness.
All Exterior compartments coated with light gray colored rubberized polyurethane material.
Color: GUNMETAL Brand: EVS
EVS Cushions & Corner Padding
Flooring: Lonseal, LonCoin (Raised Circles), ILOS Lonspeck TS Twilight.
Specify Color: ONYX 150 TS
-
Body & Chassis
Liquid Spring Suspension Installation by Utility Bodywerks DS147FS4-A , see quote, the kit will be ordered through Utility Bodywerks; Requires Dump cancel switch that Medix will order and install - installed at the Curbside rear door on the wall - "L/S Dump Overrride" - p/n: MX09166.
NOTE: 6 - 8 Week Lead Time
-
Flooring & Interior Colors
Cabinets: Laminate, High Gloss Gray
Upholstery: (Specify Color & compare to std. countertop color)
CHASSIS
BODY
Customer Phone #:
Sales Associate:
Sales Engineer:
VIN#:
Chassis Model Yr
MEDIX Model
2023
Type I-AD 170- MSV II
Ford F-450 XLT, 7.3L Gasoline, 193" WB, 16,500 GVWR
108" CA, 4x2
170"L x 96"W x 72" Interior Headroom
Description
Chassis & Conversion
2024 New Sales Model with Drop Skirt on BOTH SIDES
Customer Email:
DEALER:
CUSTOMER:
Street or P.O. Box
City, State, Zip
Customer Contact:
Unit #:XX-XXXX
9/14/2023 11:32 AM Page 1 of 9
1 99-0423
1 MODIFIED
1 99-3258
2 99-2281
1 99-2717
1 200280a
2 STD
1 MODIFIED
1 STD For
2024 Model
Compartment #3: SS, 3/4 Height, Smooth Aluminum body. Will have backer plate installed on back/inboard wall for equipment to be mounted in the upper half of this compartment.
DELETE the standard Inside/Outside access (Option does not include a standard adjustable shelf). Door with gas strut hold-open. Sealed access to paddle handle in door panel, Stainless steel sill protector. There are no offsets in this compartment. See special tub print:
#33-115134
NOTE: MSV-II 170 Type I Only.
Shelf: Adjustable, Smooth Aluminum with DA finish, Exterior Compartment.
Specify Location: Compartment #3 - SHELF TO BE HALF DEPTH NOTE: MSV-II Models Only.
Rear Entry Doors: Dual door system w/exterior/interior, locking paddle handles; fixed glass windows and Cast Grabber hold-opens. Sealed access to paddle handles in door panels. Stainless steel sill protector. Two-piece interior door panel.
Compartment #4/5 CS Forward: NO body above floor, ALS Cabinet w/ Inside/Outside access, Full- height, single Door w/gas strut hold-open. Bottom section aluminum body for optional SINGLE battery with roll-out battery tray w/removable. Stainless steel sill protector. (latching door.) Drop Skirt - a 4" dropskirt shall be provided on both Streetside and Curbside forward of the rear wheelwells. Taller front stone guards shall be provide on both driver and passenger sides.
Lights: Compartment, TecNiq Flexible LEDs: 9", 27", 36" 45", 54", ILOS compartment lights.
Locate: Compartment #1- (1) 45" E44-W010V-1
Locate: Compartment #2- (2) 27" E44-W06V-1
Locate: Compartment #3- (2) 45" E44-W010V-1
Locate: Compartment #4- (1) 36" E44-W08V-1
Locate: Compartment #6- (2) 54" E44-W012V-1
Locate: Compartment #7- (1) 9" E44-W02V-1 (if ordered) Compartment #1 SS Forward: Smooth Aluminum body, O2 Universal "M" or "H" cylinder storage for STEEL tank, Door w/gas strut hold-open, Sealed access to paddle handle in door panel.
Stainless steel sill protector.
NOTE: MAKE SURE O2 BRACKET IS SHIFTED TOWARDS THE RIGHT HAND WALL AS MUCH AS POSSIBLE.
NOTE: TWO "D" BOTTLE BRACKETS WILL BE MOUNTED ON THE BACK WALL, LEFT SIDE AND STACKED UTILIZING EXISTING BACKER PLATES. (See option in the oxygen section for brackets)
Compartment #2 SS Center: Smooth Aluminum body.
-Open Storage
-Double doors
-Gas strut hold-opens
-Sealed access to paddle handles in door panel.
-Stainless steel sill protector.
-5" Drop Floor
-Seatbelt strap on back wall for stair chair storage (left side of tub).
NOTE: Drop pan to be approximately 14.5"W x 29.75"L (inside dimensions) and be shifted towards the left side of the tub. Drop Pan to be a part of and welded in bottom of compartment tub before lining compartment, See Tub P/N: 33-117338.
NOTE: MSV-II 170 Type I Models Only.
NOTE: NO STANDARD ADJ. SHELF DUE TO STAIR CHAIR STORAGE.
NOTE: Inverter and breaker box located inside cabinet E.
Entry Door: Hurricane Strap, mounted on compartment door of module.
LOCATIONS: one on each compartment #2 door
9/14/2023 11:32 AM Page 2 of 9
1 STD
1 99-2281
1 STD
1 99-3228
1 DEL
1 STD
1 STD
1 99-0678E
1 200200MSV
1 STD
2 STD
3 STD
1 STD
4 STD
1 STD
1 STD
2 STD
1 99-1294
1 STD
1 STD
1 STD
1 STD
1 STD
1 STD
2 99-0710
03-
1 STD
-
Brake, Turn & Back-Up Lights
Lights: DOT, Brake/Tail, Turn, Back Up: Whelen 600 Series LED.
Fuel Fill Scuff Plate: Stainless steel, below fuel fill bezel for Type I.
Insulation: Pink, double sided radiant barrier/acoustic material, installed on curbside and streetside rear wheel wells.
Insulation: Spray in place foam applied to curbside entry step well and both rear wheel wells Undercoating: Per QVM Guidelines
Lights: Dome, Aurora 4" dimmable red/white LED, installed on cab headliner, wired ignition hot.
LOCATE: (1) over driver and (1) over passenger
Rub Rails: C-Channel, tapered ends, Lower Body off-set mount with neoprene spacers.
Running Boards: Diamond Plate, Type I w/starburst pattern Lights: Courtesy, (2) TecNiq EON E03-W000-1 LED lights with stainless steel horizontal bezels, center mounted below chassis door frame on top lip of running board, (1) each side of the Type I chassis only, wired to OEM dome lights.
Fender Flares: Rolled Stainless Steel
Fuel Fill: Cast aluminum fuel fill bezel.
IV Hangers: (2) Cast black rubber fold-down over knee area of Cot and Squad Bench Mirrors, OEM: (1) heated/remote control on each cab door, (1) on interior windshield Wheel Covers: Stainless steel covers w/Valve Extenders
Stone Guards: Lower body corners, ADP; 4" taller stone guards on front corners.
Kick Plate, Rear: ADP, below rear doors across to corner posts.
All Entry Door paddle handle and rotary latching components will include emergency door releases located top and bottom of each door and shall meet the FMVSS 206 30G Test Requirement Power Door Locks: Key Pad, programmable for power door locks.
Power Door Locks: Stealth Switch on Ford, Power Door Lock System, Push Button Switch (Grille bracket on E-series: Ford 33-102402; F-series: 33-115626) LOCATION: Standard position in front grille area
Power Door Locks: All Entry and Compartment Doors, wired to OEM door lock system.
Includes (1) switch by Curbside Entry Door interior in standard 4-position switch panel and (1) at Rear Curbside Wall - MSV II ONLY
Rear Bumper: ADP corner pods w/Dock bumper pads, Center grip-strut flip-up step, powder coated steel frame
Curbside Entry Door: Taller for 4" drop skirt. Door handle to remain aligned with Compt #4/5 handle; Single door system w/exterior/interior, locking paddle handles; window w/fixed glass; Gas strut hold-open. Sealed access to paddle handles in door panel. LED Step well light. Stainless steel sill protector. Two-piece interior door panel.
Entry Door: Hurricane Strap, mounted on the side entry door of module.
LOCATIONS: See Print for location.
Curbside Entry Door Stepwell: Dual, smooth aluminum steps welded into door opening coated with rubberized urethane liner material. Stainless steel threshold trim. Dri-Dek insert on lower floor of step entry.
Compartment #6 CS Rear: Smooth Aluminum body, Open Storage with offset in upper right hand corner for interior cabinetry, Door with gas strut hold-open. Sealed access to paddle handles in door panel, Stainless steel sill protector. Compartment to be 20" Wide with upper corner offset.
NOTE: WILL HAVE SHORTER DIVIDER ATTACHED TO BOTTOM OF OFFSET. Order special divider from print: 33-117399 Order special tub from print: 33-117340.
NOTE: MSVII 170 Type I or Type III ONLY.
DELETE STANDARD Divider: Aluminum w/DA finish, vertical in back Board Compartment 9/14/2023 11:32 AM Page 3 of 9
1 STD
1 300100
04-
1 STD
2 STD
1 99-1204
1 99-3202
2 99-1957
2 STD
10 MODIFIED
1 STD
1 STD
1 99-0742
1 99-0622
Note
option
below for
cover
color
1 B.O. #1298
USB Port: Vanner VSS-USB dual port 2Amp mounted on A/A wall Electrical: USB Port, Vanner VSS-USB Flush Mount (2) port USB Receptacle.. IATS LOCATION: Curbside wall over head of squad bench, below the 125v outlets Electrical: Shoreline, 125VAC, 30-amp, Kussmaul SUPER Auto Eject P/N: 091-159-30-120 side wired with hinged, yellow, weatherproof cover, located above Compartment #2 on Streetside.
Mount on a Kussmaul Stainless Steel E-Z mounting plate P/N: 091-159-081-120 with green indicator light for ease of access. Mating connector to be shipped loose. ILOS NOTE: To power roof mounted Coleman A/C in addition to the standard wiring.
NOTE: See location on print, interior components in action area have been shifted over to clear back of shoreline.
Electrical: Shoreline, 125VAC, 30-Amp, Kussmaul SUPER Auto Eject weatherproof cover to be RED, ILOS Yellow.
Console: Driver's, Formed Aluminum, EBONY PEEL powder coated, attached to floor. Will include the standard front switch panel. Console design will include backer plate on front right hand wall for future install of laptop arm by customer.
Console to include:
- (1) blank radio plate.
- Standard Switch panel with standard Whelen siren.
- Glove storage with center divider so glove box fits each side with a hinged, latching door. - (2) cupholders with small change pocket between.
- (2) portable radio cutouts at rear, designed to fit Motorola chargers.
Order from console print #44-117335 (revised with Emergency Start switch cut-out) NOTE: Type I Ford F450/550 Chassis Models Only.
Electrical: Prewire, (1) 8AWG - 12VDC ignition, power and ground from battery to a Blue Sea PN: 5032 ST Blade Split Buss "12" Fuse block – two isolated groups of six circuit fuses with cover for "Battery Hot" and "Ignition Hot" wiring.
NOTE: (1) Behind driver's seat; (1) Electrical Cabinet Antenna, Radio Coax Cables: Terminated behind driver's seat w/Power & Ground for each Dome Lights: Whelen LED 18-diodes w/chrome flange MX80EHZA, 2-banks of four (4) lights switched separately with Hi/Lo functions; 1-bank of TWO (2) lights centered over cot (due to rooftop unit), switched separately with Hi/Lo functions.
Action Area Light: 12 VDC LED light, with On/Off switch on rear control panel -
Electrical, Power Distribution, Control Center & Interior Lighting Battery Switch, Automatic: TST CDR-400. Located in Electrical Cabinet.
Batteries: OEM, under hood
Electrical: Battery System, (1) Additional, OEM, 750 C.C.A. with single roll-out tray and emergency start switch.
Locate: On battery tray in sealed compartment below ALS. The additional battery under the ALS is to be isolated as "Chassis Only" battery. The (2) batteries under the hood are to be for standard operation of the chassis and conversion. There will be a switch on the driver's side of the front console labeled "Emerg Start" PN:MX09128. Requires 200-amp continuous duty solenoid and isolator, Power Engineering PST-SBI-3112.
NOTE: Type I Models Only.
DOT Marker Lights: TecNiq LED, rubber grommet bezels; (7) S34-AC09-1 Amber- (5) on front of body as Marker lights, (2) side facing on rear extrusions as Turn Signals; (7) S34-RC90-1 Red- (5) on rear of Body as Marker lights, (2) side facing as Turn Signals.
Lights: DOT, Brake and Turn, Interior, LED, Under rear overhead cabinet, Two (2) CPI amber marker style wired to turn signals; One (1) CPI red marker style wired to brake circuit. 9/14/2023 11:32 AM Page 4 of 9
1 STD
1 STD
1 400160
1 99-1955
1 MODIFIED
3 MODIFIED
3 MODIFIED
1 STD
05-
1 STD
MODIFIED
1 99-3080
2 STD
6 500127
Rear of Body: (4) Whelen 900 Series Red Super-LEDs: (2) in upper outboard corners, (2) Mid- Body wired as Warning/Brake at the window level; (1) Whelen 900 Series Amber Super-LED in the center position over the rear doors.
Brake, Turn & Back-Up Lights: Whelen 600 Series LEDs
Lights, Warning, Intersection Lights: (2) Whelen LINZ6 Series Red Super-LEDs on Front Fenders; (2) Whelen 700 Series Red Super-LEDs above rear Wheel Wells- wired to Pri/Sec Modes Lights, Warning, Grille: LINZ6R Red LED w/clear lenses & chrome flanges on center grille bar Lights: Scene/Load, Whelen 900 Series Super-LED 9SC0ENZR Gradient Opti-Scenelight™ with chrome flange- ILOS Halogen
Specify Locations: (2) Streetside, (2) Curbside (2) Rear Load Lights Lights: Warning, Whelen LED EMERGENCY Lighting Package- Ford, Chevy Type I and Type III- Models ONLY.
NOTE: Does not include LED Scene Lights.
All LED lights shall have CLEAR Lenses. All emergency and scene lighting shall have chrome flanges in standard locations.
Front of Body: Add (7) Whelen 900 Series Super-LEDs- Specify pattern by LED Color: (4) Red, (2) White and (1) 7x3 red center: R-W-R- 7x3 R -R-W-R. Outer (2) lights and (1) Center light flash on K-Spec flasher. Inner (4) flash independently on Light Bar switch on front console.
NOTE: See option below for 7x3 led.
Lights: Warning, (1) Whelen 700 Series Red Super LED w/clear lens 70R02FCR and chrome flange, ILOS 900 Series White Super LED and chrome flange.
LOCATE: Front wall center light position, this light only to STEADY BURN RED.
Sides of Body: (4) Whelen 900 Series Red Super-LEDs: (2) each side in upper corners 12 VDC Outlets: (1) in Action Area, (1) in ALS Cabinet, (1) on curbside wall over head of bench below the 125v outlets. (relocated from the 2nd A/A)
125 VAC Outlets: Duplex, located (1) in Action Area, (1) in ALS, (1) on curbside wall over head of bench (relocated from the 2nd A/A)
Rear Switch Panel: Engraved black plastic panel with (10) LED lighted switch positions for Dome Lights (3), Vacuum (1), Vent (1), A.A. Light (1), Inverter (1), Spare switches and digital clock w/Mode Buttons. MX01517.
-
Warning Lights & Sirens
Timer: 5-minute check-out, wired to CS High mode dome lights Inverter: Vanner LSC12-1100- 1100watt with 3-Stage 55Amp battery charger, 20Amp power supply and built in GFI. Remote controlled with switch in the rear switch panel. ILOS NOTE:
OPTION 99-1955 IS REQUIRED WHEN ANY INVERTER IS MOUNTED IN ANY BULKHEAD or INTERIOR ENCLOSED CABINET. OPTION 99-2899 DUAL FANS REQUIRED ON RP-90ES and 150 MODELS. (N/A on P/T RP90 models and Transits)
Location: Lower P/T cabinet "E"
Electrical: Fan, Mechantronics Fan, (1) Axial 120x25MM 12VDC ventilation fan PN:
E1225E12AB-FSR mounted on cabinet door or side wall when any inverter is mounted in an interior, enclosed cabinet.
LOCATION: Lower P/T cabinet "E"
Breaker Box: 125 VAC w/20-Amp Breaker located in Lower cabinet "E". GFI receptacle located on the Action Area wall.
Switch, Momentary Disable: For Scene/Load Lights. (1) Located on Curbside Wall in 4-position panel. (1) Located on Rear Curbside wall in standardized position, no bezel required, vertical S.S. trim is punched for switch.
9/14/2023 11:32 AM Page 5 of 9
1 99-3081
1 STD
2 STD
1 200011-F1
1 STD
1 99-0706
06-
3 STD
1 99-0127
1 MODIFIED
1 STD
2 99-1667
07-
1 99-3409
1 B.O. #1292
HVAC System: Valeo PN: 11147463A, "STAND ALONE" High capacity, maximum cool horizontal blow HVAC system with a Valeo roof mounted condenser PN: 25067 and a STAND ALONE compressor mounted on the OEM engine installed by Valeo installers. The system shall include a digital thermostat mounted on the action area wall and inline booster pump to enhance the rear heater performance. The evaporator unit will be mounted in the front bulkhead.
NOTE: Requires additional independent AC Compressor mounted on the engine.
NOTE: Ford F-Series with 7.3L Gas Only.
HVAC System: Coleman-Mach 10 Low Profile Rooftop Air Conditioner WITHOUT Condensate Pump, (BLACK SHROUD ONLY) 15,000 BTU with Electric Heat Kit option and interior ceiling assembly; Requires a special ceiling layout and roof layout, see prints. Ceiling Assist rail will now need to include shorter assist rails, (requires additional option 99-3127 if on a 170 model). This rooftop unit will work IAT standard Heat-A/C unit and be wired to the additional 30 amp shoreline (separate option). (Approx. 11.8" tall sitting on roof of module) -
Suction Aspirator System: SSCOR disposable container mounted w/gauge and quick-connect in Action Area; SSCOR vacuum pump mounted on ceiling of Compartment #2.
Oxygen Cylinder Retention: Universal for "M" or "H" cylinder, steel w/3-spring buckle straps and top collar, powder-coated Safety Yellow color- in Compartment #1.
NOTE: MAKE SURE O2 BRACKET IS SHIFTED TOWARDS THE RIGHT HAND WALL AS MUCH AS POSSIBLE.
Oxygen: O2 Cylinder Mount, (1) CPI OA1201-D-1 strapless oxygen bottle holder with mounting plate, for (1) "D" cylinder. (When mounting at head of bench in Transit, use with shortened cargo net option 99-1841)
Specify Location(s): Compartment #1, back/inboard wall stacked per print. Brackets will be located on top of existing backer plate.
-
AC / Heat
Opticom/Emitter: Warning, GTT 794H LED Opticom Emitter (Supplier P/N: 151-794H) with on/off switch PN: 39-10-9053 in front console. Must be wired to de-activate when the vehicle is in park/neutral.
Location: Front wall above the center 7x3 led.
-
Oxygen, Vacuum & Miscellaneous Items
Oxygen Outlets: Quick-connect style, (2) in Action Area, (1) over Squad Bench Oxygen: Amico, Digital Contents Monitor with Manual By-Pass and switch on A/A panel ILOS NOTE: Deletes standard regulator
Lights: Scene/Load, (1) Whelen PFH2 Dual Panel Pioneer Plus Combination Flood/Spot Super LED with PBH203 semi recessed housing and chrome bezel installed on a powder coated white, aluminum mounting plate. Will have an on/off switch in front console "Front Flood/Off" MX09212, IATS.
NOTE: Front wall below center light head
Flasher: Dual mode flasher for Warning Light system, Vanner 9860GCPE Siren Speakers: dual 100 Watt drivers mounted through the front bumper.
Chassis: Air Horns, Buell dual horns, (1) 10" and (1) 12" airhorn mounted through the front bumper with a momentary switch PN:MX09102 on front console, "Standard" compressor, tank and fittings.
Specify Compressor Location: Compt. #2
NOTE: Type I Ford F Series Only.
Siren: Whelen 295 SLSA1, 200 Watt
9/14/2023 11:32 AM Page 6 of 9
08-
1 STD
1 MODIFIED
1 BID OPT
#1200
1 STD
1 MODIFIED
MODIFIED
1 MODIFIED
1 STD
1 DEL
1 STD
2 STD
1 STD
1 99-1849
1 99-0720
Pass-Thru Cabinets: Upper cabinet- general storage with (1) hinged, non-locking door and (1) LifeDefender latch on the door; Lower cabinet general storage with (1) hinged, non-locking door and (1) LifeDefender latch on the door.
Cabinet Above ALS: Open storage w/dual 1/2" Acrylic doors w/non-locking two-point paddle latches, (1) adjustable shelf.
ALS Cabinet: Delete standard slide-out drawer in ALS and combine middle and lower sections into one opening with (1) adjustable shelf, tall dual ½” Acrylic doors with non- locking Eberhard two-point pinch style latches. ILOS configuration.
NOTE: MSV-II ONLY
Cabinets: Shelf, Adjustable, (1) 3/4" Plywood shelf mounted in an interior cabinet where there is an existing shelf. IATS
NOTE: There will be a total of (2) adjustable shelves, in the large ALS section.
Countertop: 1st Action Area ONLY - Corian material overhanging cabinet edge w/ accent color lips.
-Main color: Steel Grey Tempest 9194TM
-Accent lip color: Black Onyx Mirage 9092MG
CPR Seat, DELETED 2nd Action Area: CPR seat w/hinged, latching lid, storage under seat w/TriMark latch, EVS formed back rest and seat cushion
Sharps/Waste Tilt-Out Cabinet: Below 2nd Action Area with non-locking Austin LifeDefender latch.
DELETE STANDARD Inside/Outside access to Compartment #3: With dual 1/2" Acrylic hinged doors with (2) round SouthCo latches each door.
Front Bulkhead Cabinets: Electrical Cabinet located above Tech Seat w/round SouthCo latching, vented door; HVAC cabinet and filtered air return above cabin-module connection.
Streetside Cabinet Configuration shall include a CPR Seat with Pro-4 seat belt system. The seat belt system shall include a custom contoured seat back, a single click Pro-4 seat belt, custom pads on the upper straps for shoulder comfort and a heat embossed Medix LOGO at the heat area. (DELETE STANDARD 2nd Action Area, which includes (1) 125VAC and (1) 12VDC outlet, located aft of the CPR seating area-outlets will be relocated to curbside wall.) Cabinets: Main Cabinet Wall, Reconfigure Streetside Cabinet Wall to eliminate the two (2) angled cabinets fore and aft of the CPR seat. The CPR seat will be widened to 32” shifting forward and eliminating the recessed suction. This will reduce forward action area countertop and overhead cabinet. The overhead cabinet fore and aft of the CPR seat will be squared off eliminating the angled cabinets. The upper rear cabinet will be flush with the face of the streetside cabinet wall. Delete 2nd Action Area and relocate the standard 12v & 125v outlets to the curbside wall over the workstation. Add storage cabinet in place of the 2nd A/A. This cabinet will have sliding polycarbonate doors and (1) adjustable shelf.
Main Wall aisle-facing Cabinets will have (1) adjustable laminated wood shelf in each and sliding polycarbonate doors with full height extruded handles. DELETE STANDARD Recessed cabinet for suction aspirator container. Stainless steel trim on lower face. See Prints for Configuration.
Action Area Overhead Cabinet: Single cabinet full-height/full-depth of Action Area with sliding polycarbonate doors and full height extruded handles.
Action Area and Switch Panel: Laminated, sealed countertop and vertical panel with Suction system collection canister and Quick-disconnect, Vacuum gauge, (2) Oxygen outlets, (1) Electric O2 w/Bypass, (1) USB, (1) 12VDC Outlet, (1) 125VAC Outlet and digital Thermostat.
Switch panel MX01517 includes (10) switch positions and digital clock w/Mode Buttons.
NOTE: Shift 125v/12v/USB on panel over to the left in order to clear the shoreline.
Cabinets, Hardware & Miscellaneous Items
Main Streetside Wall Cabinets: Specify desired configuration- 9/14/2023 11:32 AM Page 7 of 9
1 STD
1 99-0546
1 STD
1 2
3 1 STD
1 STD
1 99-2211
1 99-2245
1 STD For
2024 Model
1 99-2777
1 STD
1 STD
1 99-3127
3 STD
1 STD
3 STD
09-
1 99-0728
10-
-
Paint & Lettering
Reflective Striping, Door Open Protection: .50" Red reflective striping around interior door pan of all body doors.
Reflective Striping- Alternate Red/White chevron pattern on smooth aluminum kick panel- mounted on each rear entry and curbside entry door
-
Cots & Miscellaneous Items
Cot Mount: Install supplied Stryker Power Load systems, ILOS.
MOUNTING LOCATION: STD CENTER
Seating: EVS 1880 Child Safety Seat, (1) Technician's Seat MDX-1880S4B with 10º back. Rear facing automotive style seat to include a Pro-4 black belt system, comfort shoulder padding with heat embossed Medix LOGO at the head area of the backrest and the child safety seat system. -ILOS Pro-4 seat.
NOTE: Must specify seat base in separate line item.
NOTE: Medix Modular Models Only (Not for use on RP90 models).
Seat Base: EVS SB-2 Swivel Base for EVS Technician's Seat Assist Rail: overhead off-center toward Streetside of unit.
Grab Handles: (1) 18" x 1.25" Stainless steel with radius ends and (1) 36" x 1.25" Stainless steel with radius ends, ILOS length assist rail in Mod only that contains rooftop A/C unit.
LOCATION: (1) 18" forward and (1) 36" rearward of rooftop unit - see prints. Roof is not standard and will have plates located for these assist rail feet.
Grab handles: 12" x 1.25" dia. stainless steel mounted on each rear entry and curbside entry door Sharps/Waste: Drop-in style with aluminum, powder coated red, hinged lid and standard containers, located at head of squad bench.
Cabinet, Squad Bench Overhead: with (2) flip-up 1/2" Acrylic doors and Eberhard two point paddle latches with constant torque hinges.
Cabinet: Additional storage with Austin Gen-2 dual Acrylic doors, non-locking LifeDefender latches on each door and (1) adjustable shelf at curbside rear that protrudes into the compt. #6 wall. (Requires special tub, see option in body section) NOTE: Type I MODELS ONLY (Combine with option 99-2208 for special tub) Glove Box Holders: (2), stacked, w/single hinged, black 11ga steel powder-coated door recessed into compartment #6 over foot end of bench. Hinge door on left side and use magnets for closure. (Requires special tub, see option in body section) Order door per print:
33-113763.
Cabinet, Rear Overhead: Cabinet over rear door opening with (1) flip-up 1/2" Acrylic door, LifeDefender latch, and constant torque hinges.
Cargo Net: Head of Squad Bench, bolted to taping plates in the floor, wall and ceiling. PN:
ZRS-NETMEX009-02-B.
NOTE: Type I / III ME166, RP-90, MSV II ONLY.
Squad Bench:
Full length hinged lid w/TriMark latch for access to interior storage; Full length upholstered seat cushion except over Sharps/Waste Area. 2) EVS Pro-4 seat belt system seating positions. The seat belt positions shall include a custom contoured seat back, a single click Pro-4 seat belt, custom pads on the upper straps for shoulder comfort, a custom retractor for securing a secondary patient and a heat embossed Medix LOGO at the heat area.
Stainless steel riser on lower face.
Glove Box Holders: (3) w/hinged, black .125" powder-coated steel door, above curbside entry door.
9/14/2023 11:32 AM Page 8 of 9
1 1000072
1 OPT
1 99-2184
11-
1 SPL
1 SPL
2 STD
_______________________________ Date: ________________ Customer Signature
I have reviewed this Order and find it to be acceptable and ready to Build.
Due to on-going product improvements and the changing requirements of the ambulance industry, MEDIX Specialty Vehicles, Inc. reserves the right to change product specifications and related products without prior notice and without any obligation to change prior products or parts. ALL PATENTS RIGHTS RESERVED.
Product quotes are subject to change. Purchase Price will be the published price list within Quote/Order Entry System on the date of order acceptance by Company
Fire Extinguisher: (2) 5 lb- Ship Loose is Standard
TOTAL ORDER
Republic EVS Supplied
Stryker Package:
MTS POWER LOAD *INCLUDES FLOOR PLATE*
Power-PRO XT MTS High: Dual wheel lock, x-restraint
package, retractable head section 02 bottle holder, 3-stage IV pole PR, equipment hook, H/E storage flat, XPS side rail, XPS mattress, Knee-Gatch, Dual compatibility, backrest
storage pouch, steer-lock
-
Meret Safety Net Roll up Bag - I.V.S.S. PRO X
-
SHIP LOOSE
Paint: Mid-Body Down Type 1
Color: RED
Color Code: PPG 914521
Configuration: Per paint line on prints, below line will be painted red all the way around box. Paint lines on chassis to follow body lines per prints and wrap around back of chassis, do not paint hood. Above paint lines to be painted White.
NOTE: Requires Approved Drawings Prior to submitting order. Paint spray samples must be approved prior to scheduling.
Graphics Package:
6" white reflective stripe installed
1/2" Avery Large engine turn gold with an 1/8" black reflective pin-stripe installed Rear Chevron, sides only, 2 color (red/fluorescent yellow green) diamond grade reflective installed
Lettering and logos produced and installed
(Most lettering quoted as 2 color Avery Large engine turn gold with a black reflective outline/shade. Door logos and other lettering printed on white reflective.) Windows: Privacy tint, dark vinyl applied to all three entry module entry door windows. PER CALIFORNIA ORDERS - TINT TO BE 3% OVER NORMAL TINTED WINDOWS ON MODULE ENTRY DOORS - TO BE "3% GRADE".
NOTE: Module application only.
9/14/2023 11:32 AM Page 9 of 9