Cities Index.
Courts - Proposal

Chino City Council
October 3, 2023

Document
Courts - Proposal
Meeting
October 3, 2023
Body
Chino City Council
Original file
125 KB
Text extracted from the city's file for reading and search. Open the original on chino.legistar1.com. That file is the official record.

449 W. Foothill Blvd Suite 204 Glendora, CA 91741 PH / 626.914.1432 FX / 626.914.1435

August 29, 2023

City of Chino – City Hall

Projects: 1. IT Offices – Split large office into (2); Modify door openings

2. HR Office – Split large office into (2); Add door/glass opening

3. HR Office (Jason) – Close in office; Add door/glass opening

PROPOSAL

I. Remodel (3) office spaces per August 23, 2023 job walk including prevailing wages including:

1. IT Offices (10’ x 17’)
• Mask/Protect existing surfaces
• Remove existing double storefront doors and (1) 4’ x 7’ door/frame; re-install 4’ door at opening where double storefront doors removed; fill in/repair both openings as required; cut in/frame new 3’ x 7’ door opening to newly created office
• Construct new partition wall (approx. 10’ x 9’) with 3 5/8” light-gauge steel studs below exist T-bar ceiling and brace to deck above; install 5/8” drywall both side – finish to approx. match existing wall texture
• Split existing supply and return registers and add supply/return to newly created office *(no new VAV dampers/controls; will add manual dampers for minor adjustments.
• Install (1) new 2’x 4’ drop in T bar light fixture (supplied by City) ; tie into existing light circuit *(no new switching); reconfigure existing light locations as required
• Paint all walls affected by construction; finish (1) door • Supply/install electric strike at relocated entry door; tie into existing card reader; supply and install commercial lockset at new office door • Install carpet tiles and vinyl base *(supplied by City)

2. HR Office (13’ x 24’)
• Mask/Protect existing surfaces
• Construct new partition wall (approx. 11’ x 9’) with 3 5/8” light-gauge steel studs (where previous wall removed); install 5/8” drywall both side – finish to approx. match existing wall texture
• Cut in/frame new 9’ x 7’ for door/window/window; supply/install to approx. match existing including commercial passage hardware; repair drywall – as required
• Add (2) 110v outlets to existing circuit and (2) future data drops; add (1) additional 2 x 4 drop-in fixture (supplied by City), and separate lighting for 2nd office including separate switching control
• Paint walls affected by construction; finish new doors and rails to approximately match existing
• Add vinyl base at new wall areas affected by construction

449 W. Foothill Blvd Suite 204 Glendora, CA 91741 PH / 626.914.1432 FX / 626.914.1435

3. HR Office (Jason) (12’x 12’)
• Mask/Protect existing surfaces
• Construct new partition wall (approx. 10’ x 9’) with 3 5/8” light-gauge steel studs below exist T-bar ceiling and brace to deck above
• Cut in/frame new 6’ x 7’ for door/window; supply/install to approx. match existing including commercial passage hardware; repair drywall – as required • Separate light from general room lighting and add switch with occupancy sensor • Paint new walls and existing walls affected by construction; finish (1) new door and rail
• Install vinyl base at new wall

TOTAL COST: $ 54,865.00

Exclusions:
• Permit/Approval Fees
• Flooring and vinyl base materials
• Drop in light fixtures
• Paint materials
• Modification to Fire Sprinkler/Alarm systems
• Modifications to VAV dampers/controls
• Assumes normal work hours
• Scope not specifically identified in this Proposal

← All documents from this meeting