Attachments (See PC Packet A. Resolution 26-30-G
Planning Committee STAFF REPORT
July 09, 2026
dated 7 /9/26}
B. TRANSPAC Board Meeting Staff Report - approval of
Changes from Committee
Background
Program 20a funds
None
The Contra Costa Measure J Sales TEP includes a program, line 15: Transportation for Seniors and People with Disabilities, and Measure J line 20a: Additional Transportation Services for Seniors and People with Disabilities, which provides the TRANSPAC service area with an additional 0.5% of Measure J revenue. TRANSPAC is responsible for recommendations on how Line 20a funds are to be used. TRANSPAC issues the "Call for Projects" and approves the programming of funds in a two-year cycle. The Call for Projects is an opportunity for public and non-profit agencies in the TRANSPAC service area to request funds to support eligible transportation projects. Several of these programs have been funded in previous cycles and continue to provide essential services to residents in the central subregion. TRANSPAC issued a Call for Projects for the FY 2026-2027 and FY 2027- 2028 cycle in December 2025 (Attachment B). Program applications were requested to be submitted by January 23, 2026. Staff received nine (9) applications for eleven programs/projects requesting approximately $2.26 million in funding.
As recommended by the TRANSPAC Technical Advisory Committee, a scoring subcommittee was formed and met on March 19, 2026, to review and rate applications. Each scoring subcommittee member independently reviewed the applications and assigned ratings; overall ratings were then reconciled across the subcommittee to produce a consensus assessment for each application.
TRANSPAC staff have provided funding recommendations based on available funding and scoring subcommittee recommendations, which were voted on and approved by the TRANSPAC Board at their June 11, 2026 meeting.
The Program 20a allocation includes a reduction to support Authority staff time associated with administration in the amount of $7,000. The amounts are budgeted, and adjustments
Senior Center Shuttle
On-Demand Service GoGo Concord
Concord Go! is a senior center transportation
program by Concord Recreation Services that
offers affordable transportation. Participation
in Concord Go! services requires an annual
membership of $15.
How to Apply
Eligibility Requirements
This a free, curb-to-curb van service from your home to the Concord Senior Center! Reservations must be made at least 2 business days in advance, and no more than 7 business days ahead, riders must be able to walk to and from the vehicle.
Hours of Operation: Monday-Thursday, 9:00 a.m. - 3:30 p.m.
Reservations Hours: Monday-Thursday, 9:00 a.m. - 10:00 a.m.
To make or cancel a reservation, call the Transportation Specialist at (925) 671-3035 Concord Resident
65+ years of age
Adult 18+ years of age with disability
or health condition
Participant must provide email
address
1. Complete application online at cityofconcord.org/ConcordGo!, over the phone, or visit the Concord Senior Center.
2. Once applications are processed, we will call you to complete the membership payment.
We will continue to offer an on-demand ride service in partnership with GoGo Grandparent and we will continue the monthly subsidy up to $30, that helps reduce your out-of-pocket ride cost. Before you order a GoGo ride, participant must add funds to their GoGo account.
Hours of Operation: 24/7
To order a GoGo ride, call 1 (855) 464-6872
To cancel a ride, call 1 (855) 464-6872 and Press 9. Cancel within 5 minutes of ordering to avoid a fee.
2727 Parkside Circle Concord, CA (925) 671-3318 [email protected] About the Program
CONCORD GO! SERVICES
Attachment 3
Staff Report
Date: November 10, 2026
To: City Council
From: Mark Bustillos, Chief of Police
Reviewed by: James Nakayama, Police Captain
Greg Taylor, Director of Information Technology
Prepared by: Matthew Cain, Administrative Lieutenant
[email protected]
(925) 603-5865
Subject: Considering approval of a ten-year renewal and consolidation of the City’s existing agreements with Axon Enterprise, Inc. for public safety technology, hardware, software, licensing, maintenance, support and related services, including selected technology enhancements, in a total amount not-to-exceed $12,423,532 over 10 years, including a 20% contingency; and authorizing the City Manager to execute the agreement in a form acceptable to the City Attorney (General Fund,
Supplemental Law Enforcement Services Account Fund,
Public Safety Replacement Fund).
CEQA: Not a project/exempt pursuant to Public Resources Code Section 21065, CEQA Guidelines Sections 15060(c),
15061(b)(3), and/or 15378.
Report in Brief
The City of Concord (City) seeks to renew and consolidate the Concord Police Department's existing Axon public safety technology agreements into a single, long-term, 10-year agreement. The proposed action continues the Department's investment in body-worn cameras, TASER devices, in-car camera systems, digital evidence management, Drones as a First Responder (DFR) and other established technologies
5.g
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
2 while providing scheduled equipment replacement, ongoing support, and selected enhancements supporting officer safety, training, operational efficiency, and community service.
By renewing and consolidating these services under a negotiated long-term agreement, the City can secure significant cost savings compared with purchasing the included products and services separately. This also establishes a much more predictable financial and technology replacement plan over the next decade.
A central component of the proposal is a new Axon technology called FUSUS, which would serve as a backbone digital dashboard platform for the Real-Time Intelligence Center (RTIC). FUSUS is designed to integrate information from multiple public safety systems into a common operating environment, allowing RTIC personnel to more efficiently access, evaluate, and communicate relevant information to officers, investigators, dispatchers, and supervisors.
The proposed agreement would also transition the Department’s existing fixed Automated License Plate Reader (ALPR) program from its current third-party platform to Axon Outpost, while maintaining the current vehicle Axon ALPR capability within the fleet. This would allow fixed and vehicle ALPR information to be more directly incorporated into RTIC operations while also reducing reliance on a separate vendor platform.
In addition, this agreement includes technologies intended to improve how the Department communicates with and provides services to the community. Prepared 911 would provide automated non-emergency triage and assistive call-taking capabilities, including language detection and multilingual support. Axon AI Assistant would provide officers with language detection and real-time translation capabilities in the field.
Together, these technologies are intended to improve access to police services, relieve communication barriers, reduce unnecessary call-backs or delays, and provide more consistent language support for the residents of Concord.
The agreement also includes expanded Drone as First Responder integration and advanced virtual reality training capabilities intended to support de-escalation, crisis intervention, equipment training, and practical decision-making.
The proposed ten-year agreement has a total cost of $10,352,943.00 (Attachment 1).
When incorporating a 20% contingency to account for taxes and possible additional project requirements, the total not-to-exceed amount request is $12,423,532 over the 10 years.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
3 Recommended Action
1. Approve the renewal, consolidation, and extension of the City's existing Axon public safety technology agreements into a single ten-year agreement with Axon Enterprise, Inc., including continued equipment, software, licensing, digital evidence management, cloud-based services, equipment replacement, training, implementation, support, and selected technology enhancements, in a total amount not-to-exceed $12,423,532 over 10 years, including a 20% contingency;
2. Authorize the City Manager or designee to execute the agreement, purchase orders, implementation documents, amendments, and other documents necessary to administer the agreement in a form acceptable to the City Attorney, provided such actions remain within the Council-approved amount and substantially conform to the approved scope;
3. Authorize the budget adjustments and appropriations identified in the Financial Impact section of this report; and
4. Make the CEQA determinations as provided in this staff report.
Background
The Concord Police Department has utilized Axon technology for many years in support of core public safety operations. The Department currently utilizes Axon for body-worn cameras, TASER, Fleet Cameras, Interview Room Camera Systems, digital evidence management, Drone as a First Responder and other related technologies.
These technologies have been deployed over a number of years and are governed by agreements with differing terms, renewal dates, and equipment replacement cycles.
Several of the Department’s core systems will require contractual renewal or replacement during the proposed ten-year planning period. The differing renewal dates, hardware refresh schedules, and storage requirements also make long-term technology and financial planning more difficult and can cause significant replacement costs to occur in different budget years.
The proposed renewal would consolidate the City's existing Axon agreements, coordinate equipment replacement and support, and provide a more consistent technology environment for the next decade. This approach preserves existing investments in equipment, personnel training, and evidence management while reducing the administrative burden associated with maintaining multiple agreements and systems.
The Department also continues to develop its Real-Time Intelligence Center to improve access to timely and relevant operational information. The proposed agreement supports this effort through Axon’s digital dashboard, FUSUS, which would provide an integrated environment for accessing and evaluating pertinent public safety information.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
4 Analysis
The proposed renewal maintains the Department's established technology systems while incorporating new capabilities intended to improve officer safety, operational efficiency, training, and community service. The following sections describe the principal operational enhancements included in the agreement.
Real-Time Intelligence Center and FUSUS
FUSUS would serve as an integrated operating dashboard for the Department's Real-Time Intelligence Center. The technology allows information from multiple public safety systems, including video, automated license plate recognition, and other operational information sources, to be accessed through a common interface.
This capability supports improved situational awareness and more timely communication of relevant information to officers, investigators, dispatchers, and supervisors. The platform also allows the Department to incorporate useful existing technologies without necessarily replacing each underlying system. Implementation would occur in phases based upon operational readiness, staffing, infrastructure, and training requirements.
Officer Safety and Emergency Live View
The proposed agreement includes enhanced Emergency Live View capabilities designed to provide supervisors and authorized personnel with additional situational awareness during critical incidents. This capability allows authorized personnel to access live video from supported body-worn cameras during qualifying emergencies.
Emergency Live View can be particularly valuable during officer-involved shootings, critical incidents, and situations involving injured or incapacitated officers. Immediate access to available video may assist supervisors in assessing developing threats, coordinating resources, and determining appropriate assistance.
The technology supplements established radio communications and incident command practices while enhancing the officer-safety value of the Department's existing body-worn camera systems.
Automated License Plate Reader Integration
The Police Department currently operates an established fixed Automated License Plate Reader program through a third-party vendor. Under the proposed agreement, the Department would transition this existing fixed ALPR capability to Axon Outpost while maintaining Axon ALPR capability within the vehicle fleet.
Prepared 911 and Community Access
The proposed agreement includes Prepared 911, consisting of Automated Non-Emergency Triage and Assistive Call-Taking technologies designed to support the Department's Communications Center.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
5 The technology is intended to assist with appropriate non-emergency interactions by collecting and organizing caller information, supporting routine information-gathering functions, and helping Communications personnel determine the appropriate next step.
These capabilities can reduce repetitive administrative work and unnecessary callbacks, allowing personnel to devote greater attention to emergency and higher-priority calls.
A significant community benefit is the availability of language detection and multilingual support. These tools can help community members communicate their needs more effectively, improve the completeness of information collected, and reduce delays associated with language barriers.
Prepared 911 is intended to supplement, rather than replace, Communications personnel. Dispatchers retain responsibility for operational decisions and determining the appropriate response, and calls requiring direct dispatcher involvement would continue to be handled by Department personnel.
AI Assistant and Language Translation
The proposed agreement also includes Axon AI Assistant, which would provide language detection and real-time translation through supported body-worn camera technology. This capability can assist officers in communicating with victims, witnesses, and other community members during routine and time-sensitive contacts.
The technology supplements existing resources, including bilingual personnel and qualified interpretation services, and is not intended to replace professional interpretation when legally required or operationally appropriate. Together, AI Assistant and Prepared 911 support language access during both the initial request for service and the subsequent field response.
Virtual Reality Training
The proposed agreement includes an expanded virtual reality training platform that supplements traditional Department training and provides additional opportunities for officers to practice de-escalation, crisis intervention, communication, decision-making, and other critical public safety skills.
A significant benefit is the ability to conduct shorter, more frequent training sessions, including micro-training opportunities incorporated into routine schedules. These focused exercises allow personnel to reinforce skills, practice alternative approaches, and receive feedback without the logistical requirements associated with larger scenario-based training events.
Virtual reality training does not replace traditional hands-on instruction or required qualifications. Rather, it expands the Department's ability to deliver consistent, repeatable training throughout the year, supporting officer safety, sound decision-making, and continued professional development.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
6 Existing Systems, Drone Integration, and Technology Lifecycle The proposed agreement would also continue, and refresh technology already used by the Department, including body-worn Cameras, TASER, Fleet Cameras, digital evidence management, Interview Room Camera Systems, and related products and services.
The agreement would also expand integration with the Department’s Drone as a First Responder (DFR) program. Concord previously selected Axon Air Drone system in part because of its ability to integrate with the City’s existing Axon ecosystem and evidence management system. The City’s 2025 DFR staff report identified the operational benefits of maintaining hardware, software, evidence, support, and maintenance within a common environment. The proposed agreement expands that same consolidation strategy across additional Department technologies.
Administrative Efficiency and Digital Evidence Management The proposed renewal would continue and enhance the Department's existing digital evidence management capabilities. Body-worn cameras, fleet cameras, interview room recording systems, and other supported technologies generate digital evidence that is essential to criminal investigations, case preparation, and public accountability.
Available capabilities for automated transcription, redaction, evidence organization, and electronic sharing can reduce time spent on administrative processes and improve the efficiency of evidence management. Streamlined evidence sharing with prosecuting agencies can also support criminal discovery requirements while maintaining appropriate personnel oversight, access controls, and evidence handling procedures.
Human Oversight and Accountability
Although the proposed agreement includes enhanced automation and artificial intelligence capabilities, the technologies are intended to support Department personnel rather than replace human judgment.
Communications personnel, officers, investigators, supervisors, and other authorized users remain responsible for evaluating information, making operational decisions, and determining appropriate actions.
Strategic Plan Alignment
The proposed renewal supports the City's strategic objectives of fiscal stability, operational efficiency, and modern public safety infrastructure. The agreement provides greater predictability in technology expenditures and equipment replacement, supports more efficient public safety operations, and maintains essential officer-safety and evidence management systems. Targeted enhancements in de-escalation training, operational information sharing, and language access further support community service and personnel development.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
7 The proposed ten-year agreement has a total cost of $10,352,943.00 (Attachment 1).
When incorporating a 20% contingency to account for taxes and possible additional project requirements, the total not-to-exceed amount request is $12,423,532 over the 10 years.
Procurement Process
Pursuant to Municipal Code-Title 3 Revenue and Finance-Chapter 3.10 Purchasing, bidding regulations may be waived when there is only one verified vendor for the product or service. Axon Inc is the sole provider of the Axon ecosystem of products that include Axon body-worn cameras, TASER, Fleet Cameras, Interview Room Camera Systems, digital evidence management, Axon Air Drone as a First Responder and other related technologies (Attachment 2). Axon is integral to Public Safety operations, and after over 10 years of superior service, it is the optimal solution for the city.
Comparable Agency Adoption
Several agencies are also implementing or evaluating Axon products to include Axon Outpost ALPR and Drone as First Responder capabilities. Examples identified by Axon include Hayward, Daly City, San Mateo, Sunnyvale, Fremont, Campbell, Modesto, San Mateo County Sheriff’s Office, Stockton, Antioch, Fairfield, and Vallejo.
While individual agency needs and contract structures differ, this regional adoption provides context regarding the use of long-term integrated public safety technology platforms by comparable agencies.
Environmental Determination
Pursuant to Public Resources Code Section 21065, CEQA Guidelines Sections 15060(c), 15061(b)(3), and/or 15378 award of this contract is not subject to environmental review under the California Environmental Quality Act (CEQA) of 1970, as amended, as it will not result in a direct or reasonably foreseeable indirect physical change in the environment, and falls within the “common sense” exemption set forth in CEQA Guidelines Section 15061(b)(3), excluding projects where “it can be seen with certainty that there is no possibility that the activity in question may have a significant effect on the environment.”
Financial Impact
There is no immediate fiscal impact as all necessary funding to cover Year one costs have been previously budgeted in the FY 26/27 budget for the current Axon Agreements and other systems that are being consolidated, removed or replaced by this agreement. Years two through ten will need to be budgeted in future budgets starting with the FY 27/28 biennial budget process and are anticipated to save the City money annually when compared to the cost for continuing with the current Axon agreements and ALPR suite of products. All expenditures in years 2 through 10 are dependent upon Council budgeting the dollars necessary for the software, hardware and services in future budgets.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
8 Negotiated Contract Value and Bundled Pricing
The proposed ten-year renewal consolidates existing Axon technology agreements and selected enhancements under a negotiated bundled pricing structure. Compared with the quoted unbundled list value of the included products and services, the consolidated agreement provides a substantial reduction in overall contract pricing.
This pricing structure allows the City to continue essential technology services, coordinate equipment replacement requirements, and obtain selected enhancements at a significantly lower quoted cost than purchasing the included products and services separately at list price.
Comparison Amount
Quoted unbundled list value Approximately $23.44 million Negotiated bundled net value Approximately $10.35 million Reduction from quoted list value Approximately $13.09 million Quoted list-price discount Approximately 55.84%
The City’s Information Technology Department conducted a review of current Police Department technology expenditures, including existing Axon costs, the fixed ALPR program, and other public safety technology services that may be consolidated, reduced, eliminated, or redirected under the proposed agreement. The IT Department concluded the City currently spends approximately $983,000 annually on technology that could be used for the proposed agreement.
The annual outlay of the proposed Axon consolidated, 10-year agreement, excluding tax, is as follows:
Payment Date Net Obligation
Nov. 15, 2026 $406,000.00
Nov. 15, 2027 $950,000.00
Nov. 15, 2028 $950,000.00
Nov. 15, 2029 $950,000.00
Nov. 15, 2030 $1,009,850.00
Nov. 15, 2031 $1,073,476.00
Nov. 15, 2032 $1,141,099.00
Nov. 15, 2033 $1,213,088.00
Nov. 15, 2034 $1,289,404.00
Nov. 15, 2035 $1,370,026.00
Total $10,352,943.00
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
9 The proposed payment structure is intended to align the initial years of the renewal with existing technology expenditures. The first payment of $406,000.00 is because the City has already paid $544,237.53 in Axon invoices that have come due this fiscal year. This will be followed by three $950,000 annual payments to align with current budgeted spending. The payments then increase annually over the remaining contract term. This approach allows the City to utilize existing technology funding during the initial years while incorporating future obligations into its long-term financial planning.
Funding Sources
Funding for the proposed agreement will come from existing Police Department and Information Technology appropriations, including funds currently allocated to Axon systems and other public safety technologies that would be consolidated or replaced.
The proposed payment structure is designed to utilize these established expenditures during the initial years, with future obligations incorporated into the City's normal biennial budgeting process.
Existing Baseline Costs and Technology Consolidation
The City currently incurs recurring expenditures for several systems included in the proposed agreement. These expenditures provide an established funding baseline that can be redirected or consolidated as existing technology agreements are renewed or replaced.
Offsets include:
• Existing Axon equipment, licensing, storage, and support. • Fixed ALPR expenditures.
• Other identified technology or storage expenses that can be eliminated or redirected.
• Potential administrative and service efficiencies resulting from technology consolidation.
The appropriate financial comparison is between the proposed consolidated agreement and the anticipated costs of continuing to maintain, renew, and separately procure the technology and services required by the Police Department.
Estimated Savings Compared with Continued Separate Purchasing In addition to the negotiated discount from quoted unbundled list prices, staff evaluated the anticipated cost of continuing existing technology services and separately renewing or purchasing the included products and services. The current fiscal analysis identifies approximately $535,222 in estimated savings over the initial five-year comparison period under the proposed consolidated agreement.
City Council Agenda Report
Agenda Item No. 5.g
November 10, 2026
10 Unlike the discount from quoted list pricing, this analysis compares the proposed renewal with an alternative purchasing approach and provides additional context for the anticipated budgetary benefits of consolidation.
Financial Benefits of Early Renewal
A significant benefit of renewing now is the opportunity to secure negotiated pricing before anticipated future increases. Axon has identified a four percent annual pricing escalation associated with future contract pricing, and executing the proposed agreement within the applicable pricing window would preserve the negotiated terms.
Although the Department's current principal Axon agreement extends through 2029, future renewal pricing and replacement costs remain uncertain. The proposed ten-year agreement would establish greater long-term cost predictability while reducing exposure to future pricing escalation.
Fiscal Summary
Fiscal Element Figure of Status
Ten-year contract term $10,352,943
Quoted unbundled list value Approximately $23.44M over 10 years Reduction from quoted unbundled
value
Approximately $13.09M over 10 years
Estimated five-year modeled savings $535,222
Existing annual technology
expenditures
Approximately $983,000
The proposed ten-year renewal provides the City with an opportunity to continue essential public safety technology, coordinate future equipment replacement and support, and obtain selected enhancements under favorable negotiated pricing. By consolidating existing expenditures and securing long-term contract terms, the City can maintain critical operational capabilities while achieving significant financial value and greater budget predictability.
Public Contact
The City Council Agenda was posted.
Attachments
1. Axon Enterprise Quote
2. Axon Sole Source Letter
Axon Enterprise, Inc.
17800 N 85th St
Scottsdale, Arizona 85255
United States
VAT: 86-0741227
(800) 978-2737
Q-916074-024 Acct: 107349
Issued Oct 22, 2026
Expires Nov 30, 2026
Payment Terms N30
Mode of Delivery AUTO-GND
Concord Police Dept. - CA Currency: USD
CUSTOMER DETAILS
SHIP TO
Concord Police Dept. - CA
1350 Galindo St
Concord, CA
94520-2805
USA
BILL TO
Concord Police Dept. - CA
1350 Galindo St
Concord, CA
94520-2805
USA
SALES REPRESENTATIVE
Tierney Stuhr
Email: [email protected]
PRIMARY CONTACT
Matthew Cain
Phone: (925) 603-5865
Email: [email protected]
QUOTE SUMMARY
Program Length 120 Months
Contract Start Dec 15, 2026
Contract End Dec 14, 2036
TOTAL CONTRACT
Net Total $10,352,943.00
Est. Tax $193,995.31
Total Contract Value $10,546,938.31
DISCOUNT SUMMARY
MSRP $23,443,795.17
Net Price $10,352,943.00
Total Savings $13,090,852.17
Discount 55.84%
PAYMENT SUMMARY
DATE SUBTOTAL EST. TAX TOTAL
Nov 15, 2026 $406,000.00 $11,175.33 $417,175.33
Nov 15, 2027 $950,000.00 $17,460.54 $967,460.54
Nov 15, 2028 $950,000.00 $17,460.54 $967,460.54
Nov 15, 2029 $950,000.00 $17,460.54 $967,460.54
Nov 15, 2030 $1,009,850.00 $18,560.55 $1,028,410.55
Nov 15, 2031 $1,073,476.00 $19,729.97 $1,093,205.97
Nov 15, 2032 $1,141,099.00 $20,972.84 $1,162,071.84
Nov 15, 2033 $1,213,088.00 $22,295.97 $1,235,383.97
Nov 15, 2034 $1,289,404.00 $23,698.62 $1,313,102.62
Nov 15, 2035 $1,370,026.00 $25,180.41 $1,395,206.41
Total $10,352,943.00 $193,995.31 $10,546,938.31
SUMMARY PRICING FOR TERM
ITEM DESCRIPTION QTY TERM
(START)
UNBUNDLED LIST PRICE NET PRICE SUBTOTAL EST. TAX TOTAL
FINANCIAL TRANSACTIONS
100552 Transfer Balance - Goods 1 — — $1.00 -$13,812.78 -$13,812.78 -$1,346.75 -$15,159.53 100553 Transfer Balance - Software and
Services
1 — — $1.00 -$261,493.86 -$261,493.86 $0.00 -$261,493.86 Financial Transactions Total -$275,306.64 -$1,346.75 -$276,653.39 Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 1 of 12
Attachment 1
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026
ITEM DESCRIPTION QTY TERM
(START)
UNBUNDLED LIST PRICE NET PRICE SUBTOTAL EST. TAX TOTAL
AXON 911
102821 Prepared Automated Non-Emergency Triage88000 120 (12/2026)
— $0.06 $0.06 $642,400.00 $0.00 $642,400.00
102822 Prepared Assistive Call Taking
(Per 1,000 Calls)
36 120
(12/2026)
— $16.67 $16.67 $72,000.00 $0.00 $72,000.00
Axon 911 Total $714,400.00 $0.00 $714,400.00
AXON AI
102011 Axon AI Assistant 149 104.4516
(4/2028)
— $35.48 $15.69 $244,243.78 $0.00 $244,243.78
Axon AI Total $244,243.78 $0.00 $244,243.78
AXON AIR - DRONE
102287 Axon Air - Skydio Safe - X10
Dock Commissioning
2 — — $15,800.00 $15,800.00 $31,600.00 $0.00 $31,600.00 A00031 Axon Air R10 Team Kit Bundle 1 98.4516
(10/2028)
— $76,699.31 $70,563.05 $70,563.05 $3,419.36 $73,982.41 102639 Axon Air - Skydio Connect
Fusion+ for X10
3 120
(12/2026)
— $96.93 $89.18 $32,103.21 $0.00 $32,103.21
A00030 Axon Air R10 Patrol Kit Bundle 1 98.4516
(10/2028)
— $61,439.31 $56,524.08 $56,524.08 $2,050.53 $58,574.61 Axon Air - Drone Total $190,790.34 $5,469.89 $196,260.23 CEW
T7Dock TASER 7 / TASER 10 Dock 4 120
(12/2026)
— $2,841.12 $2,841.12 $11,364.48 $719.51 $12,083.99
102596 TASER CEW + VR Instructor Cert
& Implementation (3-Day)
1 — — $16,000.00 $16,000.00 $16,000.00 $0.00 $16,000.00 CEW Total $27,364.48 $719.51 $28,083.99
DIGITAL EVIDENCE MANAGEMENT
ProLicense Pro License Bundle 10 120
(12/2026)
— $54.52 $54.03 $64,836.00 $0.00 $64,836.00
100105 Community Link/Pro PSO Setup 1 — — $3,600.00 $3,597.26 $3,597.26 $0.00 $3,597.26 85760 Axon Auto-Transcribe -
Unlimited Service
149 120
(12/2026)
— $30.29 $30.29 $541,585.20 $0.00 $541,585.20
Digital Evidence Management Total $610,018.46 $0.00 $610,018.46 FLEET
72036 Axon Fleet 3 - Standard 2
Camera Kit
64 — — $2,695.00 $0.00 $0.00 $0.00 $0.00
Fleet3ARenewal10
Yr
Fleet 3 Advanced Renewal 10yr 62 120
(12/2026)
$208.62 $186.09 $155.13 $1,154,167.20 $17,020.30 $1,171,187.50 Fleet3A10Yr Fleet 3 Advanced 10 Year 5 120
(12/2026)
$247.79 $248.53 $214.01 $128,406.00 $2,949.53 $131,355.53 Fleet Total $1,282,573.20 $19,969.83 $1,302,543.03
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 2 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026
ITEM DESCRIPTION QTY TERM
(START)
UNBUNDLED LIST PRICE NET PRICE SUBTOTAL EST. TAX TOTAL
INTERVIEW ROOM
50039 Axon Interview - Client Software
- Maint. Per Touch Panel
2 120
(12/2026)
— $31.50 $31.50 $7,560.00 $0.00 $7,560.00
50043 Axon Interview - Streaming
Server Maintenance - Per Server
2 120
(12/2026)
— $36.83 $36.83 $8,839.20 $0.00 $8,839.20
50045 Axon Evidence - Storage -
Interview Room Unlimited
7 120
(12/2026)
— $124.80 $124.80 $104,832.00 $0.00 $104,832.00
Interview Room Total $121,231.20 $0.00 $121,231.20
OFFICER SAFETY PLAN
M00051 Officer Safety Plan 10 Premium 149 120
(12/2026)
$949.21 $444.23 $343.52 $6,142,211.16 $145,607.22 $6,287,818.38 Officer Safety Plan Total $6,142,211.16 $145,607.22 $6,287,818.38
UNLIMITED PLAN
B00099 Unlimited Premium with VR Plan 6 120
(12/2026)
$339.45 $378.19 $332.70 $239,546.64 $1,954.49 $241,501.13 Unlimited Plan Total $239,546.64 $1,954.49 $241,501.13
VEHICLE INTELLIGENCE
B00076 Outpost TAP Plan 50 60
(12/2026)
$367.33 $249.20 $199.22 $597,650.38 $21,621.12 $619,271.50 102703 Axon Outpost - Warranty -
Vandalism/Accident Extension
56 60
(12/2026)
— $1,200.00 $0.00 $0.00 $0.00 $0.00
102703 Axon Outpost - Warranty -
Vandalism/Accident Extension
56 60
(12/2031)
— $1,200.00 $0.00 $0.00 $0.00 $0.00
B00075 Outpost Plan 6 60
(12/2026)
$308.72 $229.10 $0.00 $0.00 $0.00 $0.00
B00075 Outpost Plan 6 60
(12/2031)
$308.72 $229.10 $0.00 $0.00 $0.00 $0.00
B00074 Outpost Extension Plan 50 60
(12/2031)
$221.81 $152.74 $152.74 $458,220.00 $0.00 $458,220.00
Vehicle Intelligence Total $1,055,870.38 $21,621.12 $1,077,491.50 SUBTOTAL EST. TAX TOTAL
Total $10,352,943.00 $193,995.31 $10,546,938.31
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 3 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026
DELIVERY SCHEDULE
ESTIMATED SHIPPING DATE: Nov 15, 2026
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102718 Axon Air - Skydio X10 Patrol HW Kit for OSP 2
71019 Axon Body - Dock Powercord - North America 6
70033 Axon Body - Dock Wall Mount - Bracket Assembly 6
102455 Axon Dedrone - 600Wh Battery Non-Chargeable (US) 2 102050 Axon Dedrone - Beyond Long Range Radar Hardware Kit (US) 1 103052 Axon Dedrone - DroneTag Remote ID Sensor Hardware Kit 5 103500 Axon Dedrone - Portable RF Hardware Kit with 3m Mast 1 72036 Axon Fleet 3 - Standard 2 Camera Kit 69
103151 Axon Outpost - Battery & Charger Enclosure - Extended 70 102032 Axon Outpost - Camera 71
102552 Axon Outpost - Pole - Standard 70
102488 Axon Outpost - Solar Panel - 100W 70
102737 Axon Outpost - Standard Solar Hardware Kit 70
102538 Axon Outpost - Top Mount End Cap - Standard 70
70112 Axon Signal Vehicle 5
20018 Axon TASER - Battery Pack - Tactical 168
100591 Axon TASER - Cleaning Kit 2
74200 Axon TASER - Dock - Six-Bay Plus Core 6
80087 Axon TASER - Target - Conductive Professional Ruggedized 2 80090 Axon TASER - Target Frame - Professional 27.5 in X 75 in 2 100400 Axon TASER 10 - Cartridge - Halt 1490
100401 Axon TASER 10 - Cartridge - Inert 300
100399 Axon TASER 10 - Cartridge - Live 2980
100390 Axon TASER 10 - Handle - Yellow Class 3R 153
100613 Axon TASER 10 - Holster - Safariland LH 5
100611 Axon TASER 10 - Holster - Safariland RH 144
100394 Axon TASER 10 - Magazine - Halt Training Blue 8
100396 Axon TASER 10 - Magazine - Inert Red 30
101755 Axon TASER 10 - Magazine - Live Duty Black 153
101757 Axon TASER 10 - Magazine - Live Training Purple 30 101456 Axon TASER 10 - Replacement Interposer Bucket 10 101455 Axon TASER 10 - Replacement Tool Kit - Interposer Bucket 2 100832 Axon VR - Controller - Handgun VR19H 6
100748 Axon VR - Controller - TASER 10 6
100122 Axon VR - Headset - Battery 6
100754 Axon VR - Headset - Battery Charging Dock 1
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 4 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 101751 Axon VR - Headset - HTC Focus Vision 6
101123 Axon VR - Holster - TASER 10 Safariland Gray - LH 6 101122 Axon VR - Holster - TASER 10 Safariland Gray - RH 6 102389 Axon VR - Multi-User Room Marker 2
101294 Axon VR - Tablet 6
101300 Axon VR - Tablet Case 6
100126 Axon VR - Tactical Bag 6
100623 Enhanced Hook-and-Loop Training (Halt) Suit (V2) 2
SOFTWARE QTY
102271 Auror - Retail Crime Hub 155
102639 Axon Air - Skydio Connect Fusion+ for X10 3
102693 Axon Air - Skydio X10 DFR Dock Sub Plan w/ Data for OSP 3 102694 Axon Air - Skydio X10 DFR Patrol Sub Plan w/ Data for OSP 3 102337 Axon Dedrone - Echoshield Long Range Radar Cloud Software 3 V00023 Full VR Plan 149
DFR003 OSP-DFR Dock Pro 1
DFR001 OSP-DFR Patrol 3
B00090 OSP-Unlimited Premium (No VR) 149
B00076 Outpost TAP Plan 14
C00031 TASER 10 Certification Pro Plan 149
B00099 Unlimited Premium with VR Plan 6
SERVICES QTY
102696 Axon Air - Skydio X10 DFR Dock Services - Prem Sol for OSP 3 102714 Axon Air - Skydio X10 DFR Patrol Srvcs - Prem Sol for OSP 3 102201 Axon Dedrone - Deployment Services (Per Day) 3
80190 Axon Evidence - Channel Services 1
73391 Axon Fleet 3 - Deployment Per Vehicle - Not Oversized 5 73392 Axon Fleet 3 - Installation - Upgrade (Per Vehicle) 67 102529 Axon Fusus - PSO - Implementation - All 1
101184 Axon Investigate - Training - Operator and Examiner 9 102136 Axon Outpost - Standard Installation 70
102143 Axon Outpost - Upgrade Installation 64
100751 Axon TASER 10 - Replacement Access Program - Duty Cartridge 149 100105 Community Link/Pro PSO Setup 1
102596 TASER CEW + VR Instructor Cert & Implementation (3-Day) 1
WARRANTIES QTY
80464 Axon Body - TAP Warranty - Camera 159
80465 Axon Body - TAP Warranty - Multi-Bay Dock 19
102228 Axon Dedrone - Dedrone Beyond Long Range Extended Warranty 3 80495 Axon Fleet 3 - Ext Warranty - 2 Camera Kit 69
102135 Axon Outpost - Ext Warranty - Camera 71
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 5 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 102137 Axon Outpost - Maintenance 70
102703 Axon Outpost - Warranty - Vandalism/Accident Extension 70 80379 Axon Signal - Ext Warranty - Signal Vehicle 5
80374 Axon TASER - Ext Warranty - Battery Pack T7/T10 168 80396 Axon TASER - Ext Warranty - Dock Six-Bay T7/T10 6 100704 Axon TASER 10 - Ext Warranty - Handle 153
101008 Axon VR - Ext Warranty - Handgun Controller 6
100197 Axon VR - Ext Warranty - Headset 6
100213 Axon VR - Ext Warranty - Tablet 6
101007 Axon VR - Ext Warranty - TASER Controller 6
ESTIMATED SHIPPING DATE: Dec 15, 2026
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
SOFTWARE QTY
102656 Axon Air - Axon Evidence Unlimited Data Storage Per Drone 6 85760 Axon Auto-Transcribe - Unlimited Service 149
73447 Axon Body - License - Fusus Livestream 155
102610 Axon Community Link 155
102202 Axon Dedrone - DedroneTracker.AI Cam & Radar Software Hosted 4 102215 Axon Dedrone - DedroneTracker.AI Camera Cloud Software 1 102214 Axon Dedrone - DedroneTracker.AI Radar Long Range Software 3 102205 Axon Dedrone - DedroneTracker.AI RF Sensor Cloud Software 7 102212 Axon Dedrone - DedroneTracker.AI Tracker C2 Cloud Software 1 73682 Axon Evidence - Auto Tagging License 155
80400 Axon Evidence - Fleet Vehicle License 67
73746 Axon Evidence - License - Pro 166
73478 Axon Evidence - Redaction Assistant User License 155 73683 Axon Evidence - Storage - 10GB A La Carte 30
73686 Axon Evidence - Storage - Axon Device Unlimited 155 80410 Axon Evidence - Storage - Fleet 1 Camera Unlimited 134 50045 Axon Evidence - Storage - Interview Room Unlimited 7 100165 Axon Evidence - Storage - Third Party Unlimited 155 80402 Axon Fleet - Real-Time Location, Alerts & Livestream License 67 80401 Axon Fleet 3 - ALPR License - 1 Camera 67
102642 Axon Fusus - CCTV AI Streams 250
50039 Axon Interview - Client Software - Maint. Per Touch Panel 2 50043 Axon Interview - Streaming Server Maintenance - Per Server 2 11642 Axon Investigate - Third Party Video Support 155
73739 Axon Performance - License 155
100801 Axon Records - OSP License 155
73638 Axon Standards - License 155
101180 Axon TASER - Data Science Program 149
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 6 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 20248 Axon TASER - Evidence.Com License 151
102142 Axon Vehicle Intelligence - ALPR License 70
20370 Axon VR - User Access - Full VR 149
102822 Prepared Assistive Call Taking (Per 1,000 Calls) 36 102821 Prepared Automated Non-Emergency Triage 88000
SERVICES QTY
101193 Axon TASER - On Demand Certification 149
ESTIMATED SHIPPING DATE: Nov 15, 2027
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
100400 Axon TASER 10 - Cartridge - Halt 1200
ESTIMATED SHIPPING DATE: Apr 1, 2028
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102466 Axon Air - Skydio Safe R10 HW Kit - Refresh 1 1
SOFTWARE QTY
102011 Axon AI Assistant 149
ESTIMATED SHIPPING DATE: Oct 1, 2028
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
SOFTWARE QTY
102656 Axon Air - Axon Evidence Unlimited Data Storage Per Drone 2 102467 Axon Air - Skydio R10 Subscription Plan 2
ESTIMATED SHIPPING DATE: Nov 15, 2028
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
100400 Axon TASER 10 - Cartridge - Halt 1190
ESTIMATED SHIPPING DATE: Feb 1, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102715 Axon Air - Skydio Safe X10 Dock Ops HW Kit OSP - Refresh 1 3 ESTIMATED SHIPPING DATE: Mar 16, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102717 Axon Air - Skydio Safe DFR Patrol HW Kit for OSP - Refresh 1 3 ESTIMATED SHIPPING DATE: Apr 1, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102476 Axon Air - Skydio Safe R10 Team HW Kit - Refresh 1 1 ESTIMATED SHIPPING DATE: May 15, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
101009 Axon VR - TAP Refresh 1 - Handgun Controller 6
20373 Axon VR - TAP Refresh 1 - Headset 6
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 7 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 100210 Axon VR - TAP Refresh 1 - Tablet 6
101012 Axon VR - TAP Refresh 1 - TASER Controller 6
ESTIMATED SHIPPING DATE: Jul 1, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
73309 Axon Body - TAP Refresh 1 - Camera 159
73689 Axon Body - TAP Refresh 1 - Dock Multi-Bay 19
ESTIMATED SHIPPING DATE: Nov 15, 2029
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
100400 Axon TASER 10 - Cartridge - Halt 1190
ESTIMATED SHIPPING DATE: Nov 15, 2030
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
100400 Axon TASER 10 - Cartridge - Halt 1190
ESTIMATED SHIPPING DATE: Jul 15, 2031
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
SERVICES QTY
102287 Axon Air - Skydio Safe - X10 Dock Commissioning 2 ESTIMATED SHIPPING DATE: Oct 1, 2031
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102474 Axon Air - Skydio Safe R10 HW Kit - Refresh 2 1
102473 Axon Air - Skydio Safe R10 Team HW Kit - Refresh 2 1 ESTIMATED SHIPPING DATE: Nov 15, 2031
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102713 Axon Air - Skydio Safe DFR Patrol HW Kit for OSP - Refresh 2 3 102712 Axon Air - Skydio Safe X10 Dock HW Kit OSP - Refresh 2 3 72040 Axon Fleet - TAP Refresh 1 - 2 Camera Kit 69
103151 Axon Outpost - Battery & Charger Enclosure - Extended 6 102032 Axon Outpost - Camera 6
102552 Axon Outpost - Pole - Standard 6
102488 Axon Outpost - Solar Panel - 100W 6
102737 Axon Outpost - Standard Solar Hardware Kit 6
102810 Axon Outpost - TAP Refresh One - Battery Enclosure Extended 64 102144 Axon Outpost - TAP Refresh One - Camera 65
102538 Axon Outpost - Top Mount End Cap - Standard 6
20242 Axon TASER - Certification Program Year 6-10 Hardware 149 101010 Axon VR - TAP Refresh 2 - Handgun Controller 6
20374 Axon VR - TAP Refresh 2 - Headset 6
100211 Axon VR - TAP Refresh 2 - Tablet 6
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 8 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 101013 Axon VR - TAP Refresh 2 - TASER Controller 6
SERVICES QTY
102697 Axon Air - Skydio Safe - X10 Dock Commissioning for OSP 1 102136 Axon Outpost - Standard Installation 6
WARRANTIES QTY
102135 Axon Outpost - Ext Warranty - Camera 56
102137 Axon Outpost - Maintenance 56
102703 Axon Outpost - Warranty - Vandalism/Accident Extension 56 ESTIMATED SHIPPING DATE: Dec 15, 2031
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
SOFTWARE QTY
102142 Axon Vehicle Intelligence - ALPR License 56
ESTIMATED SHIPPING DATE: Jan 1, 2032
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
73310 Axon Body - TAP Refresh 2 - Camera 159
73688 Axon Body - TAP Refresh 2 - Dock Multi-Bay 19
ESTIMATED SHIPPING DATE: Apr 1, 2034
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102475 Axon Air - Skydio Safe R10 HW Kit - Refresh 3 1
102477 Axon Air - Skydio Safe R10 Team HW Kit - Refresh 3 1 ESTIMATED SHIPPING DATE: May 15, 2034
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
102720 Axon Air - Skydio Safe DFR Patrol HW Kit for OSP - Refresh 3 3 102716 Axon Air - Skydio Safe X10 Dock Ops HW Kit OSP - Refresh 3 3 101011 Axon VR - TAP Refresh 3 - Handgun Controller 6
20375 Axon VR - TAP Refresh 3 - Headset 6
100212 Axon VR - TAP Refresh 3 - Tablet 6
101014 Axon VR - TAP Refresh 3 - TASER Controller 6
ESTIMATED SHIPPING DATE: Jul 1, 2034
Shipping Location: 1350 Galindo St, Concord, CA, 94520-2805, USA
HARDWARE QTY
73345 Axon Body - TAP Refresh 3 - Camera 159
73347 Axon Body - TAP Refresh 3 - Dock Multi-Bay 19
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 9 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026
TERMS & CONDITIONS
Tax is estimated based on rates applicable at date of quote and subject to change at time of invoicing. If a tax exemption certificate should be applied, please submit prior to invoicing.
STANDARD TERMS AND CONDITIONS
Axon Master Services and Purchasing Agreement:
This Quote is limited to and conditional upon your acceptance of the provisions set forth herein and Axon’s Master Services and Purchasing Agreement (posted at https:// www.axon.com/sales-terms-and-conditions), as well as the attached Statement of Work (SOW) for Axon Fleet and/or Axon Interview Room purchase, if applicable. In the event you and Axon have entered into a prior agreement to govern all future purchases, that agreement shall govern to the extent it includes the products and services being purchased and does not conflict with the Axon Customer Experience Improvement Program Appendix as described below.
ACEIP:
The Axon Customer Experience Improvement Program Appendix, which includes the sharing of de-identified segments of Agency Content with Axon to develop new products and improve your product experience (posted at www.axon.com/legal/sales-terms-and-conditions), is incorporated herein by reference. By signing below, you agree to the terms of the Axon Customer Experience Improvement Program.
Acceptance of Terms:
Any purchase order issued in response to this Quote is subject solely to the above referenced terms and conditions. By signing below, you represent that you are lawfully able to enter into contracts. If you are signing on behalf of an entity (including but not limited to the company, municipality, or government agency for whom you work), you represent to Axon that you have legal authority to bind that entity. If you do not have this authority, please do not sign this Quote.
EXCEPTIONS TO STANDARD TERMS AND CONDITIONS
Please Note: California Tax Law Change (SB 122)
Due to a recent California legislative change (SB 122), Software-as-a-Service (SaaS) products will become subject to state and local sales taxes effective January 1, 2027. This quote reflects current 2026 tax regulations. However, please be advised that any invoices issued on or after January 1, 2027, will include applicable CA sales and use taxes (typically 8-10%), which may increase your final invoiced total. Official California Department of Tax and Fee Administration - https://cdtfa.ca.gov/industry/retailers-and-purchasers-of-digital-products/ Agency has existing contract(s) originated via Quote(s):
Q-397138, Q-493635, Q-495047, Q-500007, Q-516426, Q-532784, Q-537160, Q-541939, Q-559878, Q-720913, Q-726919, Q-755304, Q-865044, Agency is terminating those contracts effective 12/15/2026. Any changes in this date will result in modification of the program value which may result in additional fees or credits due to or from Axon.
The parties agree that Axon is applying a Transfer Balance of -$275,306.64 100% discounted Fleet hardware contained in this quote reflects a TAP replacement for hardware purchased under existing quotes aforementioned above. All TAP obligations from this contract will be considered fulfilled upon execution of this quote.
Rewrite Estimates
Estimated Amounts and Contract Terminations. Any amounts stated as due under existing or terminated contracts — including contract transfer balances carried forward to new or pending contracts — are estimates based on payments received as of the calculation date. These estimates may be adjusted if new contracts are not executed on the anticipated dates or if expected payments are not made.
Refresh Shipment Timing
Technology Assurance Plan (TAP) Refresh Prior to Renewal. For Customers with expiring agreements that include TAP refresh rights, Axon may, in its discretion, ship refresh hardware under the existing contract while renewal or replacement agreements are in progress. Any such shipments will be deemed made under the terms of the existing contract until the new contract is fully executed, after which any applicable updates, fees, or adjustments will apply.
Shipment Timing
Shipment Variance . Estimated shipment dates are provided for planning purposes only and are not guarantees. Axon may ship hardware before or after the estimated shipment date, and failure to meet an estimated shipment date will not, by itself, constitute a breach, provided Axon uses commercially reasonable efforts to meet estimated shipment dates.
Signature Date Signed
10/22/2026
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 10 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026 Outpost SOW
1. Purpose
This Statement of Work ("SOW") outlines the scope, responsibilities, and installation details for Axon as part of the Customer's purchase of Axon Outpost. This SOW operates under the terms of the Agreement. All capitalized terms in this SOW shall have the same meaning as the Agreement.
2. Scope of Work
Axon and Axon authorized subcontractors will install and maintain Axon Outpost on selected Customer owned properties.
3. Installation Location
Customer grants Axon the right to install and maintain Axon Outpost at location sites approved by Axon.
3.1. If location sites have not been selected or assessed at the time of contract signature, Axon reserves the right to invoice the Customer for additional install complexities not accounted for in the initial quote.
4. Installation, Validation, and Support
4.1. Site Selection and Assessment. Axon will support site selection and assessment. Assessments may be conducted virtually or in-person and may include confirmation of visibility/ coverage, cellular strength, solar feasibility, and access to AC power sources.
4.1.1. For all existing infrastructure installation sites, Customer is responsible for condition of existing infrastructure.
4.1.2. If during a site walk it has been deemed that an installation is more complex than initially quoted, Axon reserves the right to invoice Customer for the additional cost of installation.
4.1.3. If Axon deems a selected location site is not suitable for installation, a new site must be selected and assessed.
4.2. Permitting. Axon will assist with obtaining the necessary local, state, or Federal approvals before installing Outpost. All permitting fees are the responsibility of the customer. All permit licenses will be in the name of the customer.
4.3. Installation. Axon will install all Axon Outpost hardware and agreed-upon pole (where applicable).
4.3.1. Solar Sites. For sites with solar power, Axon will: (a) install the Outpost camera, battery, and solar panel; (b) ensure the camera is connected to power and LTE; (c) ensure the camera is set at the optimal capture angle; (d) ensure the panel is installed for optimal sun exposure.
4.3.2. AC Sites. For sites with AC power, Axon will: (a) install the Outpost camera and AC adapter; (b) ensure the camera is set at the optimal capture angle. Axon will not conduct any electrical work to connect the AC adapter to power. The customer may work with a licensed electrician to connect the camera to power. Or, If requested, the customer may request for Axon to coordinate with a licensed electrician for an additional cost.
4.3.3. Existing Infrastructure Installations. If selected infrastructure has existing camera(s), Axon will remove the hardware before installing Outpost. Axon will not dispose of equipment, repair any surfaces or structures, or remove underground cables or conduit.
4.3.4. Standard and Advanced Installations. For Standard or Advanced installations, Axon will install a breakaway or MASH approved pole, respectively. Axon will call 811 prior to installation.
4.3.5. DOT Pole Installation Service. Axon will install Outpost on existing DOT poles and ensure compliance with DOT guidelines. Axon will not install DOT poles.
4.3.6. Complex Location Sites. Complex location sites require a custom SOW and include, but are not limited to, toll booths, bridges and overpasses, federal or military land, areas with restricted access or high security, flood zones, railway crossing, mountainous or hilly terrain.
4.3.7. Exclusions. Installation services do not include the following, unless specifically scoped in a custom SOW: electrical work, concrete drilling, bucket truck or non-standard equipment rental, trenching, tree trimming, custom engineered drawings or traffic plans, traffic control beyond basic MUTCD traffic control, environmental impact studies.
5. Power Requirements
5.1. AC-Powered Sites. Axon will provide all necessary equipment compatible with standard AC power configurations. Customer is responsible for contracting a licensed electrician to ensure installation meets NEC (National Electrical Code) standards and the power must be continuous and non-switched to support uninterrupted system operation; all electrical work must comply with local codes and safety regulations.
5.2. Solar-Powered Sites. Installation sites must offer unobstructed southern exposure to maximize solar efficiency. Axon will assess solar viability during site assessment, including shading, positioning, and mounting considerations. Customer will ensure the selected location sites must maintain direct, unobstructed visibility to the sky to ensure consistent solar energy capture. Customer agrees to help maintain environmental conditions that support reliable solar performance (e.g., minimizing nearby shade, vegetation growth).
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 11 of 12
Concord Police Dept. - CA Q-916074-024 Generated Oct 22, 2026
6. Traffic Control
Axon will provide basic MUTCD traffic control and provide necessary traffic signs, cones, and temporary barriers.
7. Dependencies and Potential Delays
Installation is subject to but not limited by the following factors, which may affect scheduling and completion: delays due to local permitting requirements or jurisdictional approvals; availability and completion of necessary electrical work at the installation site (for AC-powered setups); coordination with Customer and subcontractors, including restricted hours or special access requirements; weather-related delays that may impact site safety or installation feasibility; or any site-specific safety protocols or regulatory requirements that must be satisfied prior to deployment.
8. Training and Onboarding
Axon’s team will provide hands-on training for relevant personnel, user credentials and access to supporting applications, and operational guidance tailored to the current system configuration.
9. General Responsibilities
9.1. Axon will: (a) install, configure, and maintain all hardware at designated location site; (b) validate system power, connectivity, and functionality of Outpost; (c) integrate Outpost with Fusus, including NCIC and state hotlists; and (d) will provide training, documentation, and technical support to Customer personnel.
9.2. Customer will: (a) fund and maintain all legally required permits, authorizations, and/or licensing to place, maintain, and/or remove the Outpost at the installation sites; (b) ensure access to installation sites, support device placement communication, and coordinate internally (e.g., facilities, IT, legal, public safety) to facilitate deployment; (c) support scheduling for permitting and local compliance requirements; (d) designate a primary and backup point of contact; and (e) support site selection, utility clearance, and installation approvals.
Axon Enterprise, Inc. Doc ID: 30dd47123fb8 Tax estimates are approximate and subject to change at time of invoicing.
Q-916074-024 • Page 12 of 12
Sole Source Letter for Axon Enterprise, Inc.’s Product Packages Version 26.0 Page 1 of 4 To: United States state, local and municipal law enforcement agencies Re: Sole Source Letter for Axon Enterprise, Inc.’s Product Packages A sole source justification exists because the following goods and services required to satisfy the agency’s needs are only available for purchase from Axon Enterprise. Axon is also the sole distributor of all Axon product packages in the United States of America.
Axon Product Packages
1. Officer Safety Plan 10: Includes a TASER 10 energy weapon, the TASER 10 standard certification bundle (including the Axon VR TASER Skills Package), unlimited Axon Evidence (Evidence.com), Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – Third-party (3P) storage, Axon Standards, and Fusus BWC with Livestreaming.
2. Officer Safety Plan 10 Plus (Officer Safety Plan 10+): Includes a TASER 10 energy weapon, the TASER 10 Certification Pro bundle (including the Axon VR Full VR Package), unlimited Axon Evidence (Evidence.com), Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, Axon Records (must have over 100 sworn personnel), Fusus Fixed CCTV Standard Streams, Fusus PSO, Dedrone counter UAS sensors, and Outpost + TAP.
3. Officer Safety Plan 10 Premium: Includes a TASER 10 energy weapon, the TASER 10 Certification Pro bundle (including the Axon VR Full VR Package), Axon body camera, unlimited Axon Evidence (Evidence.com), Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, Axon Records (must have over 100 sworn personnel), Fusus Fixed CCTV AI Streams, Fusus PSO, Dedrone counter UAS sensors, unlimited 3P storage, Drone as First Responder (DFR) Dock / Dock Pro and Patrol, Retail Crime Hub, and Outpost + TAP + Vandalism.
4. TASER 10 Basic: Pays for the TASER 10 program in installments over 5 years including the energy weapon, battery, holster, dock, and core, TASER Axon Evidence license, TASER Research Evaluation and Data Program (TREND), 10 upfront live cartridges, live duty magazine, and Axon Academy Online Training Content. Spares for the handle and battery provided at 1 per 30 bundles. This plan includes warranties for the energy weapon and battery.
5. TASER 10 Certification Standard: Pays for TASER 10 program in installments over 5 years the energy weapon, battery, holster, dock, and core, full magazine set, TASER Axon Evidence license, TASER Axon Evidence admin license (1 per 100 bundles, max of 2), and the TASER Research Evaluation and Data Program (TREND). It includes 15 upfront live cartridges, 7 upfront HALT cartridges, and 10 inert cartridges scaled to the inert magazine count (1 magazine per handle, max of 30), plus outyear deliverables of 5 HALT cartridges per year (Years 2–5) and a duty cartridge replenishment program. It includes the on-demand certification, HALT suit and target, and Data Science Program. This plan includes the Axon VR TASER Skills Package and warranties for the energy weapon and battery.
6. TASER 10 Certification Pro: Pays for TASER 10 program in installments over 5 years the energy weapon, battery, holster, dock, and core, full magazine set, TASER Axon Evidence license, TASER Axon Evidence Attachment 2
Sole Source Letter for Axon Enterprise, Inc.’s Product Packages Version 26.0 Page 2 of 4 admin license (1 per 100 bundles, max of 2), and the TASER Research Evaluation and Data Program (TREND). It includes 20 upfront live cartridges, 10 upfront HALT cartridges, and 10 inert cartridges scaled to the inert magazine count (1 magazine per handle, max of 30), plus outyear deliverables of 8 HALT cartridges per year (Years 2–5) and a duty cartridge replenishment program. It also includes on-demand certification, a HALT suit and target for training, and the Full VR Bundle.
7. ISLE Officer Safety Plan 10 Plus (Officer Safety Plan 10+): Includes a TASER 10 energy weapon, the TASER 10 Certification Pro bundle (including the Axon VR Full VR Package), unlimited Axon Evidence (Evidence.com), Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, and Axon Community Request. 40+ sworn only will include Fusus Fixed CCTV Standard Streams, Fusus PSO, Dedrone counter UAS sensors, and Outpost + TAP.
8. ISLE Officer Safety Plan 10 Premium: Includes a TASER 10 energy weapon, the TASER 10 Certification Pro bundle (including the Axon VR Full VR Package), unlimited Axon Evidence (Evidence.com), Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, unlimited 3P storage, and Retail Crime Hub. 40+ sworn only will include Fusus Fixed CCTV AI Streams, Fusus PSO, Dedrone counter UAS sensors, Drone as First Responder (DFR) Patrol, and Outpost + TAP + Vandalism.
9. Officer Safety Plan 7: Includes a TASER 7 energy weapon, the TASER 7 certification bundle, unlimited Axon Evidence, Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, and Fusus BWC with Livestreaming.
10. Officer Safety Plan 7 Plus (Officer Safety Plan 7+): Includes a TASER 7 energy weapon, the TASER 7 Certification with VR bundle (including the Axon VR Full VR Package), unlimited Axon Evidence, Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, Axon Records (must have over 100 sworn personnel), Fusus Fixed CCTV Standard Streams, Fusus PSO, Dedrone counter UAS sensors, and Outpost + TAP.
11. Officer Safety Plan 7 Premium: Includes a TASER 7 energy weapon, the TASER 7 certification with VR bundle (including the Axon VR Full VR Package), unlimited Axon Evidence, Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, Axon Records (must have over 100 sworn personnel), Fusus Fixed CCTV AI Streams, Fusus PSO, Dedrone counter UAS sensors, unlimited 3P storage, Drone as First Responder (DFR) Dock / Dock Pro and Patrol, Retail Crime Hub, and Outpost + TAP + Vandalism.
12. ISLE Officer Safety Plan 7 Plus (ISLE Officer Safety Plan 7+): Includes a TASER 7 energy weapon, the TASER 7 Certification with VR bundle (including the Axon VR Full VR Package), unlimited Axon Evidence, Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate
Sole Source Letter for Axon Enterprise, Inc.’s Product Packages Version 26.0 Page 3 of 4 Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, and Axon Community Request. 40+ sworn only will include Fusus Fixed CCTV Standard Streams, Fusus PSO, Dedrone counter UAS sensors, and Outpost + TAP.
13. ISLE Officer Safety Plan 7 Premium: Includes a TASER 7 energy weapon, the TASER 7 certification with VR bundle (including the Axon VR Full VR Package), unlimited Axon Evidence, Axon Evidence Pro Command Staff Pro license (1 per 100 users), Axon Signal Sidearm, Axon Body Device Connectivity, 100 gigabytes (GB) – 3P storage, Axon Standards, Fusus BWC with Livestreaming, Channel Services (one integration), Auto-Tagging, Axon Redaction Assistant, 3P video support and Axon Investigate Pro, 3P video support and Axon Investigate Pro training (up to 15 sworn personnel per package), Axon Performance, Axon Community Request, unlimited 3P storage, and Retail Crime Hub. 40+ sworn only will include Fusus Fixed CCTV AI Streams, Fusus PSO, Dedrone counter UAS sensors, Drone as First Responder (DFR) Patrol, and Outpost + TAP + Vandalism.
14. TASER 7 Certification: The TASER 7 Certification bundle centers on the TASER 7 handle, with spare handles provided at 1 per 30 bundles, a battery pack, cleaning kit, holster, and a six-bay weapons dock, each backed by warranty coverage. It includes an Axon Evidence license, 10 upfront live cartridges, 4 upfront HALT cartridges, and 4 inert cartridges, plus outyear deliverables of 4 live cartridges per year (Years 2–5) and 4 HALT cartridges in Year 3, along with a duty cartridge replenishment program. It also includes a HALT suit, target and target frame for training, on-demand certification access, and the Data Science Program for usage analytics.
15. TASER 7 Certification with Virtual Reality (VR): TASER 7 Certification with VR combines the TASER 7 handle, battery, cleaning kit, holster, six-bay dock, cartridges, HALT suit and target, certification, and licensing with the Full VR Plan (VR headset, controller, handgun controller, tablet, and immersive training software), delivered together on an installment structure.
16. TASER Ion Certification: TASER Ion Certification is built around a concealment-style handle (spares provided at 1 per 30 bundles), paired with the TASER 10 cartridge and magazine ecosystem (live duty, HALT, and inert), a charging cable, cleaning/maintenance kit, and Safariland holster. It includes 8 upfront live cartridges, 8 upfront HALT cartridges, and 4 upfront inert cartridges, plus outyear deliverables of 12 HALT cartridges per year (Years 2–5) and a duty cartridge replenishment program. It also includes on-demand certification, a HALT suit and target for training, energy weapon and admin Evidence.com licensing, and the Data Science Program.
17. TASER Ion Certification Add-On: TASER Ion Certification is built around a concealment-style handle (spares provided at 1 per 30 bundles), paired with the TASER 10 cartridge and magazine ecosystem (live duty, HALT, and inert), a charging cable, cleaning/maintenance kit, and Safariland holster. It includes 8 upfront live cartridges, 8 upfront HALT cartridges, and 4 upfront inert cartridges, plus outyear deliverables of 12 HALT cartridges per year (Years 2–5) and a duty cartridge replenishment program. It also includes a HALT suit and target for training.
18. Axon VR TASER Skills Package: VR TASER Skills is sold at the same 1-per-25 licensing ratio as Full VR.
It includes the VR headset with a battery (1 per 100 bundles) and charging dock (1 per 25 bundles), the TASER VR controller and holster, and a tactical carry bag. TAP coverage extends to the headset and controller, each with warranty and scheduled hardware refreshes. The package includes a "User Access" license/SKU for software that provides access to TASER Arena and TASER Range Skills + Validation.
19. Axon VR Full VR Package: The Full VR bundle is sold at one license per 25 sworn personnel and is built around a VR headset with a battery (1 per 100 bundles) and charging dock (1 per 25 bundles), a TASER VR controller and holster, a handgun controller, a tablet with case, a tactical carry bag, and multi-user room markers. TAP coverage extends to the headset, TASER controller, handgun controller, and tablet, each with warranty and scheduled hardware refreshes. Software is delivered under a single "User Access" license/SKU.
Sole Source Letter for Axon Enterprise, Inc.’s Product Packages Version 26.0 Page 4 of 4
SOLE AUTHORIZED DISTRIBUTOR FOR
TASER BRAND ENERGY WEAPON PRODUCTS
SOLE AUTHORIZED REPAIR FACILITY FOR
TASER BRAND ENERGY WEAPON PRODUCTS
Axon Enterprise, Inc.
17800 N. 85th Street, Scottsdale, AZ 85255
Phone: 800-978-2737
Fax: 480-991-0791
Axon Enterprise, Inc.
17800 N. 85th Street, Scottsdale, AZ 85255
Phone: 800-978-2737
Fax: 480-991-0791
Please contact your local Axon sales representative or call us at 1-800-978-2737 with any questions.
Sincerely,
Josh Isner
President
Axon Enterprise, Inc.
a, c, Axon, Axon Fleet, Axon Investigate, Axon Justice, Axon Respond, Axon VR, TASER, TASER 7, and TASER 10 are trademarks of Axon Enterprise, Inc., some of which are trademarks in the US and other countries. For more information visit www.axon.com/legal. All rights reserved. © 2026 Axon Enterprise, Inc.
Staff Report
Date: November 10, 2026
To: City Council
From: Mindy Gentry, Director of Community Development
Prepared by: Aaron Sage, Planning Manager
[email protected]
(925) 671-3465
Subject: Considering introduction of an Ordinance amending Concord Municipal Code (“CMC”) Section 18.20.020 (Use
Classifications) and repealing and replacing CMC Section
18.200.180 (Accessory Dwelling Units) to bring the regulations for Accessory Dwelling Units and Junior Accessory Dwelling Units into conformance with state law and implement the City’s Housing Element, by reading of the title only and waiving further reading.
CEQA: Statutorily exempt pursuant to Public Resources Code Section 21080.17 and CEQA Guidelines Section 15282(h).
Report in Brief
Concord Municipal Code (“CMC”) Section 18.200.180 provides regulations for accessory dwelling units (“ADUs”) and junior accessory dwelling units (“JADUs”)1, which are additional living units located on the same lot with a proposed or existing single- or multi-family principal dwelling. ADU ordinances are authorized by state law and, if adopted, must conform to detailed state regulations.
The City last updated CMC Section 18.200.180 (“ADU Ordinance”) in October 2023.
Since that time, nine state ADU bills became law requiring further amendments to the ADU Ordinance. The proposed Ordinance (Attachment 1) updates the City’s ADU Ordinance to conform with current state ADU law and implements Objective 1.2 of the City’s 2023-2031 Housing Element, which requires such updates. The Ordinance also 1 JADUs are limited to 500 square feet and may only be constructed within an existing single-family dwelling (including an attached garage).
5.h
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
includes various non-substantive amendments to improve usability and internal consistency.
On October 21, 2026, the Planning Commission held a public hearing and recommended that the City Council adopt the Ordinance.
Recommended Action
Adopt an Ordinance amending Concord Municipal Code (“CMC”) Section 18.20.020 (Use Classifications) and repealing and replacing CMC Section 18.200.180 (Accessory Dwelling Units) to bring the regulations for Accessory Dwelling Units and Junior Accessory Dwelling Units into conformance with state law and implement the City’s 2023-2031 Housing Element (PL26100 – DC).
Background
State ADU Laws
The California Legislature has deemed ADUs (including JADUs) to be a valuable form of housing stock as they provide housing in existing neighborhoods for family members, students, in-home health care providers, and persons with disabilities at rents that are typically below market rates. Accordingly, California Government Code Sections 66310 through 66342 (the “State ADU Laws”) authorize local governments to adopt ADU ordinances and set forth detailed parameters for such ordinances so as not to unreasonably restrict the creation of ADUs. State ADU laws also require that:
• ADUs be allowed within multifamily developments and processed ministerially when applicable standards are met;
• Local jurisdictions submit amendments to their ADU ordinances to the state Department of Housing and Community Development (“HCD”) within 60 days of adoption, and respond to any noncompliance findings from HCD within 30 days; and
• Any local ADU ordinance that conflicts with State ADU Law, or fails to meet the above HCD deadlines, is rendered null and void, and that State ADU Laws shall only be applied until the local jurisdiction adopts a compliant ADU ordinance.
Since 2023, the Governor of California has signed into law nine bills which amend the State ADU Laws in a manner that requires updates to the City’s ADU Ordinance.2 These bills are discussed briefly below.
2 In addition to these bills, other bills have amended provisions related to ADU fees, which the City has implemented through the Fee and Charges Schedule, as well as other administrative requirements that have been implemented by staff and that did not require ADU Ordinance amendments.
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
2023 Bills
• Assembly Bill (AB) 976 – This bill made the existing prohibition on local owner-occupancy requirements for ADUs permanent by removing a December 31, 2024 sunset clause.
2024 Bills
• Senate Bill (SB) 477 – Relocated the Government Code sections pertaining to ADUs and JADUs into a new chapter, and, within that chapter, divided key regulations into smaller sections by topic area. SB 477’s changes to state law were only organizational, not substantive, but nevertheless they require amendments to the ADU Ordinance where the previous Government Code sections are referenced.
• AB 2533 – Expanded to JADUs the existing prohibition on denying a permit to legalize an unpermitted ADU constructed before January 1, 2020 due to non-compliance with applicable building code requirements (except for specified health and safety standards), or state or local ADU standards. • SB 1211 – Increased the allowable number of new detached ADUs on properties with an existing multifamily dwelling from two to eight, or the number of existing multifamily units, whichever is less. The bill also defined “livable space” and prohibited jurisdictions from requiring replacement parking when uncovered parking is converted to an ADU or demolished to construct an ADU. 2025 Bills
• AB 462 –Required that jurisdictions grant occupancy approval prior to the primary dwelling when the primary dwelling was destroyed in a state-declared emergency.
• AB 1154 – Narrowed the existing owner occupancy requirement for a property with a JADU to apply only when the JADU occupant shares a bathroom in the single-family dwelling rather than having their own bathroom. The bill also prohibited JADUs from being used as short-term rentals (i.e., for less than 30 days).
• SB 543 – Clarified that the various types of “state-exempt” ADUs3 already allowed under state ADU laws may be combined. For single-family properties, this means a total of four units may be constructed: the primary dwelling, a detached, new construction ADU, a conversion/interior ADU, and a JADU. For 3 “State-exempt ADUs” refers to certain ADUs that must be reviewed by the local jurisdiction under a narrower set of rules than other ADUs, pursuant to Government Code Section 66323. A key provision of Section 66323 is that no additional standards beyond those specified in this section may be imposed, even if they qualify are “objective” under state law. This means that objective architectural or privacy standards cannot be applied to state exempt ADUs.
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
existing multifamily properties, this means that multiple ADUs, equal to 25 percent of the existing units, may be constructed within existing non-livable space, in addition to two or more detached ADUs (see SB 1211 above).
SB 543 also required that jurisdictions provide an appeal process for ADU permit decisions (with a determination on the appeal required within 60 business days), specified that the 500-square-foot maximum size of a JADU is based on “interior livable space,” and prohibited local ordinances from imposing certain development standards that would prevent the development of an ADU. • AB 130 – Removed a provision allowing objective design standards to be imposed on ADUs in multifamily structures if a local ordinance allowed such ADUs prior to July 1, 2018. This provision did not apply to Concord as multifamily ADUs were not allowed at this time.
2026 Bills
• AB 956 – Increased the allowable number of detached, new construction “state-exempt” ADUs on a single-family property to two, with a provision that jurisdictions are not required to allow a JADU on a property where two such units have been constructed.
Housing Element
Objective 1.2 of the City’s 2023-2031 Housing Element (“Housing Element”) states:
Amend ADU Ordinance, if needed, to conform to future amendments to State law and submit to HCD within 60 days of adoption.
Following adoption by the City Council, the updated ADU Ordinance will be submitted to HCD within 60 days as required by the Housing Element and state law.
Analysis
The proposed revisions to the ADU Ordinance are shown in the following attachments:
• Attachment 1, Exhibits A and B provide the revised CMC Sections 18.20.020 (Definitions) and 18.200.180 (Accessory Dwelling Units) in “clean” format. • Attachment 2 provides the revised CMC Section 18.20.020 in “redline” (strikethrough/underline) format.
• Attachment 3 provides the revised CMC Section 18.200.180 in “redline” format.
In addition, Attachment 4 provides a detailed summary of the changes in table format.
The following discussion summarizes the most substantial changes within each subsection of the proposed Ordinance (headers below correspond to the subsection titles).
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
A. Purpose
• Government Code references have been updated to reflect the current location of state ADU laws, based on the re-chaptering enacted by SB 477.
B. Definitions
• Definitions for “livable space,” “proposed,” and “sanitation” have been added. “Livable space” is required by SB 1211, and the others are needed to provide greater clarity on key terms.
• Various definitions that are currently located in both CMC Sections
18.20.030 and 18.200.180 have been deleted from Section 18.200.180 to shorten the ADU Ordinance and avoid inconsistencies between these sections in the event of future amendments.
• Regulatory language (i.e. development standards and requirements) has been removed from various definitions and relocated to the appropriate section of the ADU Ordinance. A key example of this is the JADU definition, which previously contained standards such as the maximum size and the requirement that the JADU be constructed within an existing single-family dwelling.
C. General Requirements
• As required by Government Code Section 66323, various requirements which are not applicable to “state-exempt” ADUs, e.g., standards for maximum size, design, and privacy, have been relocated to subsection D of the ADU Ordinance (“Requirements Applicable to Non-Exempt Accessory Dwelling Units”).
• As required by SB 1211 (Government Code Section 66314(c)(11)), uncovered parking removed in conjunction with construction of an ADU is not required to be replaced. Previously the ADU Ordinance applied this provision only to removal of covered parking spaces. See CMC Section
18.200.180(C)(8).
• The size limits for decks and porches attached to state-exempt detached ADUs have been applied to all detached and attached ADUs, since these provisions help improve ADU aesthetics by resulting in less “boxy” designs and enhance the quality of life for ADU occupants.
• Provisions have been added to specify that decks, porches, and similar features cannot project into required setbacks unless they are 18 inches or less above grade, and to allow a maximum 24-inch projection for eaves and other roof elements. These provisions are in alignment with other
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
standards for non-ADU projects. Additional setbacks and/or fire protection may apply under the Building Code.
• The owner occupancy requirement for all ADUs has been deleted as required by AB 976. The owner occupancy requirement for properties with JADUs has been relocated to the JADU section.
D. Requirements Applicable to Non-State-Exempt Accessory Dwelling Units • This is a new subsection created to capture requirements that do not apply to “state-exempt” ADUs. Several provisions previously located in the “General Provisions” subsection, which were not permissible for state-exempt ADUs pursuant to Government Code Section 66323, have been located here, including maximum size, design (colors and materials), privacy, and parking.
• The provision limiting ADUs to 50 percent of the principal dwelling’s floor area (currently in CMC Section 18.200.180(C)(8)) has been revised to apply only to attached ADUs. This is consistent with State ADU Law which requires this standard only for attached ADUs.
• Several design- or privacy-related standards have been revised to fully comply with state objectivity requirements. The most substantial change is to the requirement (currently in CMC Section 18.200.180(C)(10)(c)) that upper-story windows “avoid direct line of sight to existing neighboring units by staggering window and door placement.” While the terms “avoid” and “staggering” lack clarity, the proposed language creates a rigorous, quantified method for determining when and how the standard applies. • Corner side setbacks have been added to the provision for interior side and rear setbacks, given that state ADU law does not differentiate between interior and corner side setbacks.
E. Requirements Applicable to Non-State-Exempt Accessory Dwelling Units • This is a new subsection created to capture requirements that apply only to “state-exempt” ADUs. As the state provisions for these ADUs (Government Code Section 66323) have become more complex, a separate subsection is warranted. This also clearly distinguishes these provisions from those applicable to all ADUs and non-state-exempt ADUs. • As required by AB 956, the number of detached ADUs on single-family properties has been increased to two.
• As required by SB 1211, the maximum number of detached ADUs on multifamily properties has been increased to eight (but not exceeding the number of existing units on the lot).
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
F. Junior ADUs
• As allowed by AB 956, an exception has been added prohibiting JADUs on single-family lots where two detached ADUs have been constructed or proposed.
• As noted above, the owner occupancy requirement for JADUs has been relocated to this subsection since it no longer applies to other ADUs.
Additionally, as required by AB 1154, an exception to this requirement has been added for JADUs that have access to a bathroom in the attached single-family dwelling.
G. Appeals
• The current regulations do not allow for appeals of decisions on ADUs because they are based on a ministerial review process. Pursuant to SB 543 and Government Code Section 66317(d), this subsection has been updated to allow only ADU applicants or property owners to appeal ADU decisions to the Planning Commission, which shall provide a final written determination within 60 business days after receipt of the appeal. State ADU Law does not require the City Council to consider such appeals.
Planning Commission Hearing
As noted above, on October 21, 2026 the Planning Commission (“Commission”) held a public hearing and recommended that the City Council adopt the Ordinance. No public comments were submitted prior to or at the hearing. Prior to the hearing, one of the Commissioners submitted questions that resulted in staff recommending the following minor edits to the ordinance, which the Commission included in its recommendation: (1) add a provision that the 50-percent size limitation on attached ADUs (relative to existing dwelling units) must be waived if it limits the ADU to less than 800 square feet; and (2) add Planned Development districts with residential uses to the list of districts allowing ADUs.
Development Code Findings
The proposed amendment complies with the required findings for zoning amendments in CDC Section 18.455.070(B), as follows:
1. The proposed amendment is consistent with the general plan.
The proposed amendments are consistent with the City’s 2030 General Plan, and more specifically, with the General Plan’s 2023-2031 Housing Element, in that they are required by Objective 1.2 of the Housing Element, and they implement various Housing Element policies, including the following:
• encourage a variety of housing types, including ADUs (Policy 1.2); and
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
• encourage ADUs in new and existing residential developments (Policy
1.4).
Additionally, ADUs have consistently provided a substantial portion of the City’s contribution toward its Regional Housing Needs Allocation (RHNA), and staff anticipates that the proposed changes will further increase ADU production to help meet the City’s RHNA.
2. The proposed amendment would not be detrimental to the public interest, health, safety, convenience, or welfare.
The proposed amendments would not have any of these impacts because housing is a matter of statewide concern, this Ordinance will provide for additional housing opportunities in existing neighborhoods, and existing regulations, including the Building Code, will ensure that new ADUs meet health and safety standards.
3. Zoning map amendments shall also find that the affected site is physically suitable, including absence of physical constraints, access, compatibility with adjoining land uses, and provision of utilities, for the requested zoning designation and proposed or anticipated uses and/or development.
This finding does not apply because no zoning map amendments are proposed.
Financial Impact
While the proposed amendments are expected to allow a minor increase in the number of ADUs constructed in the City, no significant financial impacts are anticipated from this minor increase.
Environmental Determination
Pursuant to the California Environmental Quality Act of 1970, Public Resources Code §21000, et seq., as amended and implementing State CEQA Guidelines, Title 14, Chapter 3 of the California Code of Regulations (collectively, “CEQA”), the proposed amendments are statutorily exempt from CEQA review pursuant to Public Resources Code Section 21080.17 and CEQA Guidelines Section 15282(h). Accordingly, no further environmental review is required. This determination reflects the City’s independent judgement and analysis.
Public Contact
The City Council Agenda was posted. Notification was published in the East Bay Times on October 30, 2026, as required by state law and the CMC.
City Council Agenda Report
Agenda Item No. 5.h
November 10, 2026
Attachments
1. Draft Ordinance
Exhibit A – CDC Section 18.20.020 (Clean)
Exhibit B – CDC Section 18.200.180 (Clean)
2. CDC Section 18.20.020 Redline Edits
3. CDC Section 18.200.180 Redline Edits
4. Summary Table of Revisions
Attachment 1
ORDINANCE NO. 26-XX
AN ORDINANCE AMENDING CONCORD MUNICIPAL CODE (“CMC”)
SECTION 18.20.020 (USE CLASSIFICATIONS) AND REPEALING AND REPLACING CMC SECTION 18.200.180 (ACCESSORY DWELLING UNITS) (PL26100 – DC),
WHEREAS, in California Government Code Section 66310 et seq. (“State ADU Law”), the California Legislature has found and declared that California faces a severe housing crisis, and that accessory dwelling units (“ADUs”) are an essential component of California’s housing supply; and WHEREAS, State ADU Law authorizes local agencies to adopt ordinances providing for the creation of ADUs in areas zoned to allow a single-family or multifamily dwelling residential use; and WHEREAS, Concord Municipal Code (“CMC”) Section 18.200.180 (the “City’s ADU Ordinance”) was last updated in 2023 and no longer conforms with State ADU Law, which has been amended numerous times since 2023; and
WHEREAS, State ADU Law provides that a local ADU ordinance that fails to meet the requirements of State ADU Law shall be null and void, and that agency shall thereafter only apply the standards established in State ADU Law, unless and until the agency adopts an ordinance that complies with State ADU Law; and
WHEREAS, California Government Code Section 65350 et seq. provides for the adoption and amendment of general plans and elements of those general plans by local jurisdictions, and Government Code Section 65580 et seq. (“State Housing Element Law”) requires that the City adopt a housing element for the eight-year period 2023–2031 to accommodate the City’s Regional Housing Needs Allocation (“RHNA”) of 5,073 housing units, including units for very low-, low-, moderate-, and above-moderate-income households; and
WHEREAS, on August 22, 2023, the City adopted the 2023–2031 Housing Element (“Housing Element”) of the General Plan, including Objective 1.2, which states: “Amend ADU Ordinance, if needed, to conform to future amendments to State law and submit to HCD within 60 days of adoption; and
WHEREAS, on October 23, 2023, the California Department of Housing and Community Development certified the Housing Element, confirming that it complies with State Housing Element
2 Law; and
WHEREAS, to conform with State ADU Law and implement Housing Element Objective 1.2, amendments to CMC Sections 18.20.020 (Use Classifications) and 18.200.180 (Accessory Dwelling Units) are proposed and attached hereto as Exhibits A and B; and WHEREAS, on October 21, 2026, the Planning Commission, after giving all public notices required by state law and the CMC, held a duly noticed public hearing on the proposed Ordinance, received the staff report, staff presentation, and comments from the public and interested parties (the “Planning Commission Information”), and, after closing the public hearing, adopted Resolution No. 26-06 PC recommending that the City Council adopt this Ordinance; and WHEREAS, the City has complied with the requirements of the Local Planning Law (Government Code section 65100 et seq.), and the City’s applicable ordinances and regulations with respect to approval of amendments to the CMC; and
WHEREAS, on November 10, 2026, the City Council, after giving all public notices required by state law and the CMC, held a duly noticed public hearing on the proposed Ordinance; and WHEREAS, at such public hearing, the City Council considered all oral and written information, testimony, and comments received during the public review process, including information received at the public hearing, the written report from City staff dated November 10, 2026, materials, exhibits presented, and all other information that constitutes the record of proceedings on which the City Council has based its decision, which is maintained at the offices of the City of Concord Planning Division (collectively, “City Council Information”), and declared its intent to approve and adopt the Ordinance.
THE CITY COUNCIL OF THE CITY OF CONCORD DOES ORDAIN AS FOLLOWS:
Section 1. All of the facts set forth in the Recitals are true and correct and are hereby incorporated and adopted as findings of the City Council as if fully set forth herein.
Section 2. The City Council has reviewed, considered, and evaluated the Planning Commission Information, the City Council Information, all other pertinent plans, documents, and testimony prior to acting upon this Ordinance.
Section 3. The documents and other materials that constitute the record of proceedings upon
3 which the City Council has based its decision are located in an may be obtained from the City of Concord Clerk’s Office, 1950 Parkside Drive, Concord, CA 94519.
Section 4. CEQA
Pursuant to the California Environmental Quality Act (CEQA) of 1970, Public Resources Code Section 21000, et. seq., as amended and implementing State CEQA Guidelines, Title 14, Chapter 3 of the California Code of Regulations (collectively “CEQA”), the proposed Development Code amendments are statutorily exempt pursuant to California Public Resources Code Section 21080.17 and CEQA Guidelines Section 15282(h). Accordingly, no further environmental review is required. This determination reflects the City’s independent judgment and analysis.
Section 5. Development Code Amendment Findings
1. The proposed amendment is consistent with 2030 General Plan.
The proposed amendments are consistent with the City’s 2030 General Plan, and more specifically, with the General Plan’s 2023-2031 Housing Element, in that they are required by Objective 1.2 of the Housing Element, and they implement various Housing Element policies, including the following:
• encourage a variety of housing types, including ADUs (Policy 1.2); and • encourage ADUs in new and existing residential developments (Policy 1.4).
Additionally, ADUs have consistently provided a substantial portion of the City’s contribution toward its RHNA, and the proposed changes are anticipated to further increase ADU production to help meet the City’s RHNA.
2. The proposed amendment would not be detrimental to the public interest, health, safety, convenience, or welfare of the city.
The proposed amendments would not have any of these impacts because housing is a matter of statewide concern, this Ordinance will provide for additional housing opportunities in existing neighborhoods, and existing regulations, including the Building Code, will ensure that new ADUs meet health and safety standards.
3. Zoning map amendments shall also find that the affected site is physically suitable, including absence of physical constraints, access, compatibility with adjoining land uses, and provision of utilities, for the requested zoning designation and proposed or anticipated
4 uses and/or development.
This finding does not apply because no zoning map amendments are proposed.
Section 6. The City Council does hereby pass and adopt this Ordinance No. 26-XX.
Section 7. Those definitions in CMC Section 18.20.020 (Use Classifications) set forth in Exhibit A are hereby amended in their entirety (all other definitions and portions of Section 18.20.020 shall be maintained and are unaltered by this Ordinance). CMC Section 18.200.180 (“Accessory Dwelling Units”) is amended in its entirety as set forth in Exhibit B. Exhibits A and B are attached hereto and made a part hereof.
Section 8. This Ordinance shall become effective thirty (30) days following passage and adoption. In the event a summary of said Ordinance is published in lieu of the entire Ordinance, a certified copy of the full text of this Ordinance shall be posted in the office of the City Clerk at least five (5) days prior to its adoption and within fifteen (15) days after its adoption, including the vote of the Councilmembers. Additionally, a summary prepared by the City Attorney’s Office shall be published once at least five (5) days prior to the date of adoption of this Ordinance and once within fifteen (15) days after its passage and adoption, including the vote of the Councilmembers, in the East Bay Times, a newspaper of general circulation in the City of Concord.
ATTEST: Laura M. Nakamura
Mayor
By:
Monique Robinson
Interim City Clerk
(Seal)
//
//
//
5 Ordinance No. 26-XX was duly and regularly introduced at a regular meeting of the City Council of the City of Concord held on November 10, 2026, and was thereafter duly and regularly passed and adopted at a regular meeting of the City Council held on December 15, 2026, by the following vote:
AYES: Councilmembers -
NOES: Councilmembers -
ABSTAIN: Councilmembers -
ABSENT: Councilmembers -
I HEREBY CERTIFY that the foregoing is a true and correct copy of an ordinance duly and regularly introduced, passed, and adopted by the City Council of the City of Concord, California.
By:
Monique Robinson
Interim City Clerk
Exhibits:
A. CMC Section 18.20.020 (Use Classifications)
B. CMC Section 18.200.180 (Accessory Dwelling Units)
Exhibit A
Concord Development Code Section 18.20.020 (Use classifications) “Dwelling, dwelling units, housing units” means a room or group of internally connected rooms that have sleeping, cooking, eating, and sanitation facilities but not more than one kitchen, and constitutes an independent housekeeping unit occupied by or intended for one household on a long-term basis, including the following:
“Accessory dwelling unit” means an attached, interior or detached dwelling unit that provides complete independent living facilities for one or more persons, is located on the same lot with an existing or proposed single-family or multifamily principal dwelling, and includes permanent provisions for living, sleeping, eating, cooking, and sanitation. An accessory dwelling unit also includes an efficiency unit and a manufactured home, as defined below.
“Duplex” means a single building on a lot that contains two dwelling units, each designed for occupancy by one household.
“Efficiency unit” is a small attached or detached accessory dwelling unit, with a maximum floor area of 150 square feet and which includes an efficiency kitchen and bathroom facilities, as specified by this title per the California Health and Safety Code Section 17958.1, as amended from time to time. “Junior accessory dwelling unit” is a type of accessory dwelling unit which is contained entirely within an existing or proposed single-family principal dwelling and is subject to additional requirements specified in Section 18.200.180 (Accessory Dwelling Units).
“Manufactured home” shall have the same meaning as defined in California Health and Safety Code Section 18007, as amended from time to time.
Exhibit B
18.200.180 Accessory dwelling units.
Accessory dwelling units and junior accessory dwelling units shall comply with the requirements of this section.
A. Purpose. The purpose of this section is to comply with California Government Code Title 7, Division 1, Chapter 13, Section 66310 et seq., or successor statute, which provides for local jurisdictions to set development standards for accessory dwelling units and junior accessory dwelling units so as to advance the city’s housing goals by increasing the supply of more affordable housing units, while ensuring they remain compatible with the existing neighborhood.
B. Definitions. These definitions only apply to this section and in the event there is a conflict between these definitions and other provisions of the Concord Municipal Code, these definitions shall prevail.
“Accessory dwelling unit” shall have the same meaning as defined in Chapter 18.20 CDC. “Architecturally and significant historic district” means one of the officially recognized historic landmarks or council-designated historic districts in the city. “Attached accessory dwelling unit” means an accessory dwelling unit occupying a proposed addition that is physically connected to and shares at least a portion of one wall with an existing single-family or multifamily principal dwelling.
“Car share vehicle” means a motor vehicle available for short-term rental (less than 30 days), including an option for hourly rental.
“Conversion” means the act of modifying an existing legal building or a portion thereof to an accessory dwelling unit.
“Efficiency kitchen” includes a cooking facility with appliances, a food preparation counter, and storage cabinets, which are of reasonable size in relation to the size of the dwelling unit. “Efficiency unit” shall have the same meaning as defined in Chapter 18.20 CDC. “Exempt accessory dwelling unit” is an attached or detached dwelling measuring up to 800 square feet with four-foot side and rear yard setbacks that is not subject to lot coverage, floor area ratio, open space, and other development standards if applying such standards prohibits its construction.
“Existing” means a single-family principal dwelling, accessory structure, or a multifamily principal dwelling structure that was lawfully constructed prior to the receipt of an application of an accessory dwelling unit or junior accessory dwelling unit. “Interior accessory dwelling unit” is an accessory dwelling unit developed within the interior of an existing or proposed single-family principal dwelling (including attached garages) or within an existing accessory structure, but not including an attached accessory dwelling unit as defined herein.
“Junior accessory dwelling unit” shall have the same meaning as defined in Chapter 18.20 CDC.
Exhibit B
“Livable space” means a space in a dwelling intended for human habitation, including living, sleeping, eating, cooking, or sanitation.
“Living area” means the interior habitable area of a dwelling unit, including basements and attics but not garages.
“Manufactured home” shall have the same meaning as defined in California Health and Safety Code Section 18007, as amended from time to time.
“Multifamily principal dwelling” means a principal dwelling consisting of two or more attached units.
“Owner” means any person with a legal interest in real property, as shown in the last equalized assessment roll for city taxes, accompanied with a right to occupy said property. For purposes of this section, “owner” shall not mean a tenant or lessee of the real property. “Principal dwelling(s)” means the residential dwelling unit(s) that is (are), or will be, legally established as the primary use and building(s) on a residential lot, to which the accessory dwelling unit may be established through and subordinate to. “Proposed dwelling” means a dwelling that is the subject of a permit application and that meets all applicable laws.
“Public transit” means a location where the public may access buses, trains, subways, and other forms of transportation that charge set fares and run on fixed routes, including, but not limited to, a bus stop or train station.
“Sanitation facilities” means a bathroom containing a sink, toilet, and a shower or bathtub.
C. General Requirements. The following requirements shall apply to all accessory dwelling units and junior accessory dwelling units.
1. Building Permit Required. Accessory dwelling units and junior accessory dwelling units shall require a building permit in compliance with the California Building Code as set forth in CMC Title 15 for dwellings. A building permit application for an accessory dwelling unit or a junior accessory dwelling unit shall be accompanied by the appropriate application fee and shall be subject to the following procedures:
a. The application shall be ministerially processed within 60 calendar days of receipt of a complete application and shall be approved if the proposed unit conforms to the requirements of this section. Within 15 business days of receipt, an application will either be deemed complete or incomplete. If the application is deemed incomplete it will be returned with an explanation of the deficiencies and additional information that is required to remedy the application. An applicant or property owner may appeal a determination that an application is incomplete pursuant to subsection (G) of this section.
b. The city shall toll the 60 calendar day review period set forth in subsection (C)(1)(a) for processing the application if requested in writing by the applicant or property owner.
Exhibit B
c. If the application for an accessory dwelling unit or a junior accessory dwelling is submitted with a permit application to create a principal dwelling on the lot, the application for the accessory dwelling unit or junior accessory dwelling unit will not be acted upon until the application for the principal dwelling is approved or denied, but thereafter shall be processed within 60 calendar days after approval of the application for the principal dwelling and approved if it meets the requirements of this section. d. Occupancy of the accessory dwelling unit or junior accessory dwelling unit shall not be permitted until the city approves occupancy of the principal dwelling. This provision shall not apply to accessory dwelling units substantially damaged or destroyed by an event referenced in a state of emergency proclaimed by the Governor of California, subject to the provisions of California Government Code Section 66328.
2. Density. An accessory dwelling unit or junior accessory dwelling unit that conforms to the standards of this section shall not be considered to exceed the allowable residential density for the lot upon which it is located.
3. Subdivision.
a. No subdivision of land or air rights shall occur that would result in the accessory dwelling unit or junior accessory dwelling unit existing on a separate lot from the principal dwelling. An accessory dwelling unit or junior accessory dwelling unit may not be sold independently of the principal dwelling but may be leased separately. b. An accessory dwelling unit and a principal dwelling may be owned by multiple owners as tenants in common if the principal dwelling and accessory dwelling unit were developed by a qualified nonprofit corporation, as that term is defined in and pursuant to California Government Code Section 66340, and the transaction meets the requirements of California Government Code Section 66341 or successor statute.
4. Short-Term Rentals Prohibited. An accessory dwelling unit or junior accessory dwelling unit shall not be rented for a term of less than 30 calendar days.
5. Zoning Conditions and Building Code Requirements. The city will not deny a building permit application for an accessory dwelling unit or a junior accessory dwelling unit because of nonconforming zoning conditions, building code violations, or unpermitted structures on the property that do not present a threat to public health and safety and are not affected by the construction of the accessory dwelling unit.
6. Permitted Use. Accessory dwelling units and junior accessory dwelling units shall be permitted in the following zoning districts to the extent required by California Government Code Section 66314 et seq.
Zoning District
R (Residential)
NTS (North Todos Santos)
CO (Community Office)
Exhibit B
CMX (Commercial Mixed-Use)
NC (Neighborhood Commercial)
DP (Downtown Pedestrian)
DMX (Downtown Mixed-Use)
PD (Planned Development)*
*If the specific PD permit allows single-family or multifamily residential uses (including multifamily uses within a mixed-use building).
7. Delay of Enforcement of Building Standards. The owner of an accessory dwelling unit or junior accessory dwelling unit may request that correction of any violation of building standards be delayed pursuant to Government Code Section 66331.
8. Demolition Permit. A detached garage that is to be replaced with an accessory dwelling unit shall have the demolition permit issued concurrently with the accessory dwelling unit permit.
9. Decks, Porches, Covered Patios, Stairs and Landings. Such features, if more than 18 inches above grade, shall be permitted subject to the following requirements:
a. The area of such features shall not exceed, either individually or cumulatively, 40 square feet or five percent of the livable space of the accessory dwelling unit to which they are attached, whichever is less. An exception to this standard may be granted through the design and site review process.
b. No portion of such features shall project into a required setback, whether required by this section or by the underlying zoning district.
10. Roof Projections. No eave or other roof element shall project more than 24 inches into a required setback.
D. Requirements Applicable to Non-Exempt Accessory Dwelling Units. The following requirements shall apply to all accessory dwelling units except “state-exempt” units in compliance with subsection (E) below and junior accessory dwelling units in compliance with subsection (F) below. Accessory dwelling units that qualify as “state-exempt” shall not be subject to this subsection.
1. Number of Units. One non-exempt accessory dwelling unit shall be permitted on a lot with a single-family or multi-family dwelling, provided that there are no other accessory dwelling units (other than a junior accessory dwelling unit) existing or proposed on the lot.
2. Minimum Size. The living area of an accessory dwelling unit shall be at least 150 square feet in size.
3. Maximum Size. The interior livable space of an accessory dwelling unit shall not exceed the following:
Exhibit B
a. One thousand square feet on lots with a net area of less than 12,000 square feet, excluding up to 230 total square feet for attached garages or carports. b. One thousand two hundred square feet on lots with a net area of 12,000 square feet or greater, excluding up to 460 total square feet for attached garages or carports. c. For attached accessory dwelling units, 50 percent of the floor area of the principal dwelling, or the applicable limit in subsection (D)(3)(a) or (b), whichever is less. This limitation will be waived if it limits the size of the accessory dwelling unit to less than 800 square feet.
4. Zoning Development Standards. Accessory dwelling units shall meet all provisions of the zoning district in which they are located and all other applicable provisions of the development code, except where such provisions would conflict with this section. Such provisions shall be waived in the amount necessary to accommodate an accessory dwelling unit of up to 800 square feet in floor area.
5. Design. The following standards shall apply to all accessory dwelling units except accessory dwelling units constructed pursuant to pre-approved plans provided by the City free of charge:
a. Matching Colors, Materials and Roof Type. The accessory dwelling unit shall be integrated with the principal dwelling by meeting at least two of the following criteria, unless an exception is granted through the design and site review process:
i. At least one exterior paint or stain color matches an exterior color on the principal dwelling.
ii. At least two exterior materials (e.g., stucco, horizontal siding, wood window trim, etc.) match exterior materials on the principal dwelling. iii. The roof form (e.g., hip, gable, etc.) and pitch match the roof form and pitch covering the greatest portion of the principal dwelling. b. Exterior Entrances and Staircases.
i. All attached accessory dwelling units shall have a separate exterior entrance from that of the principal dwelling. This entrance shall not be located on the same side, or facing in the same direction, as the entrance for the principal dwelling, unless the accessory dwelling unit entrance is not visible from an adjoining street or public right-of-way.
ii. No attached accessory dwelling unit shall have an exterior staircase that is visible from an adjoining street or public right-of-way.
iii. For purposes of this subsection, “visible from an adjoining street or public right-of-way” means that a straight line of sight, unobstructed by land or any legally authorized permanent structure (excluding all vegetation and landscaping), can be drawn from any point located between 3 feet and 6 feet above the surface of any
Exhibit B
public right-of-way or street (including sidewalks) within 50 feet of the subject property lines, to any portion of the proposed exterior entrance or stairway. c. Window-to-Window Privacy.
i. Standard. No accessory dwelling unit window, including windows within exterior doors (the “subject window”), where the finished floor is located more than 8 feet above finished grade, shall be placed such that a residential window on an adjoining property intersects the subject window’s restricted field of vision. Due to its temporary nature, vegetation shall have no bearing on the applicability of this standard.
ii. Definition. “Restricted field of vision” means the three-dimensional spatial volume projecting outward from the exterior surface of the subject window, terminating at a horizontal distance of 25 feet from the horizontal midpoint of the subject window’s structural window opening at five feet above the finished floor, and bounded by the following planes beginning five feet above the finished floor:
(a) An upper plane that extends horizontally (0 degrees) and is bounded by two lines extending from the leftmost and rightmost edges of the structural window opening, with said lines diverging outward by 15 degrees from a line drawn perpendicular to the adjacent exterior wall;
(b) A lower plane that slopes downward at a 45-degree angle relative to the upper plane; and
(c) Two vertical side planes that connect the boundaries of the upper and lower planes, creating a total internal horizontal cone of 30 degrees plus the width of the structural window opening.
iii. Exemptions. This standard shall not apply when:
(a) The subject window has a permanent finished sill height of no less than 6 feet above the interior finished floor level.
(b) The subject window is permanently manufactured and installed with frosted, patterned, or acid-etched glass that achieves a minimum haze value of 70 percent when tested in accordance with ASTM D1003 (or an equivalent international standard). Removable aftermarket privacy films, decals, or superficial tints do not qualify.
6. Parking. One off-street parking space per accessory dwelling unit shall be provided, subject to the following provisions:
a. Parking for an accessory dwelling unit shall be in addition to the required off-street parking for the principal dwelling.
b. Parking spaces may be uncovered, tandem, and/or located in the front yard setback if contained within the space of an existing or proposed driveway, unless such parking
Exhibit B
would not comply with objective standards related to fire and life safety or maximum slope.
c. An existing driveway may be widened to accommodate the required parking space, provided the expansion does not result in more than 50 percent of the required front setback or yard area (whichever is greater) being paved or covered with impervious surface.
d. Parking for the accessory dwelling unit may not result in or include additional curb cuts unless specifically permitted pursuant to CMC 18.160.100(A). e. Parking for an accessory dwelling unit shall not be required in any of the following instances:
i. The accessory dwelling unit is located within one-half mile walking distance of public transit.
ii. The accessory dwelling unit is located within a designated architecturally and historically significant historic district.
iv. On-street parking permits are required by the City but not offered to the occupant of the accessory dwelling unit.
v. A car share vehicle site is located within one block of the accessory dwelling unit. f. Removal of Existing Parking. When a covered or uncovered parking space is removed in conjunction with the construction of or conversion to an accessory dwelling unit, the removed parking space shall not be required to be replaced.
7. Hillside Development. The living areas of accessory dwelling units proposed on any hillside lot are exempt from the hillside development use permit requirements described in Chapter 18.300 CMC. This exemption shall not apply to other attached or detached areas, buildings or structures proposed as part of an accessory dwelling unit, including, but not limited to, attached or detached garages, sheds, or playhouses.
8. Creek and Riparian Protection. Accessory dwelling units within creek or riparian areas as defined in Chapter 18.305 CMC shall comply with the objective development standards in CMC 18.305.040 but are exempt from the design and site review application requirement.
9. Setbacks.
a. Interior Side, Corner Side and Rear Setbacks. Accessory dwelling units shall provide interior side, corner side, and rear setbacks of at least four feet. b. Front Setbacks. Accessory dwelling units shall comply with the front setback required for the principal dwelling. In cases where the principal dwelling encroaches into the setback, the accessory dwelling unit may encroach to the same extent as the principal dwelling. This requirement shall be waived in the amount necessary to accommodate an accessory dwelling unit of up to 800 square feet in floor area.
Exhibit B
c. Replacement of Existing Structures. No setback shall be required for a structure constructed in the same location and to the same dimensions as an existing structure that is converted to an accessory dwelling unit or to a portion of an accessory dwelling unit. d. Setbacks from Other Structures. Detached accessory dwelling units shall be set back at least five feet from a primary dwelling and/or any accessory structure.
10. Height.
a. Attached Accessory Dwelling Units. The height of an attached accessory dwelling unit shall not exceed 25 feet or the height limitation that applies to the principal dwelling, whichever is lower. Furthermore, in no case shall the height exceed two stories.
b. Detached Accessory Dwelling Units. The height of a detached accessory dwelling unit shall not exceed 16 feet, except as follows:
i. 18 feet shall be permitted for single-story accessory dwelling units to match the primary roof pitch of the principal dwelling.
ii. 18 feet shall be permitted on a lot within one-half mile walking distance of a major transit stop or a high-quality transit corridor, as those terms are defined in Public Resources Code Section 21155. An additional two feet in height, up to 20 feet, shall be permitted to match the primary roof pitch of the principal dwelling. iii. 18 feet shall be permitted on a lot with a multifamily, multistory principal dwelling.
iv. For the purposes of this subsection (D)(10)(b), “match the primary roof pitch of the primary dwelling” means duplicating the slope ratio (rise-to-run) of the roof plane covering the greatest portion of the principal dwelling, within a maximum allowable variance of +/- 0.5:12.
c. Accessory dwelling units located on the second story of an existing or proposed accessory structure may exceed 16 feet in height, provided they maintain interior and corner side setbacks of at least 10 feet and meet the height and rear setback standards applicable to the principal dwelling.
E. State-Exempt Accessory Dwelling Units. The following provisions shall apply to accessory dwelling units classified as “state-exempt” pursuant to California Government Code Section 66323 or successor statute:
1. Lots with Single-Family Dwellings. Any of the following accessory dwelling units, or any combination thereof, shall be permitted on lots with a single-family principal dwelling:
a. One interior accessory dwelling unit subject to the following provisions:
i. Exterior access separate from the existing or proposed single-family principal dwelling.
Exhibit B
ii. The side and rear setbacks are sufficient for fire and safety. iii. If developed within an accessory structure, the accessory structure may include an expansion of not more than 150 square feet beyond the same physical dimensions as the existing accessory structure to accommodate ingress and egress. b. Up to two detached, new construction accessory dwelling units, subject to the following requirements:
i. Interior side, corner side, and rear setbacks of at least four feet shall be provided for each accessory dwelling unit.
ii. The interior livable space of each accessory dwelling unit shall not exceed 800 square feet.
iii. Each accessory dwelling unit shall comply with the applicable height standard in subsection (D)(10)(b) of this section. An accessory dwelling unit’s status as “state-exempt” shall have no bearing on the applicability of this requirement.
2. Lots with Multifamily Dwellings. The following accessory dwelling units shall be permitted on lots with a multifamily principal dwelling, provided that detached accessory dwelling units shall be limited to 800 square feet of interior livable space:
a. Up to two detached accessory dwelling units on a lot with a proposed multifamily principal dwelling.
b. Up to eight detached accessory dwelling units on a lot with an existing multifamily principal dwelling, if the number of accessory dwelling units does not exceed the number of existing units on the lot and the accessory dwelling units have side and rear setbacks of at least four feet and height in compliance with subsection (D)(10)(b) of this section.
c. A lot with an existing multifamily principal dwelling may also contain accessory dwelling units converted from portions of the building that are not used as livable space, including, but not limited to, storage rooms, boiler rooms, hallways, attics, basements, or garages. The maximum number of accessory dwelling units permitted shall be 25 percent of the number of existing, legally permitted units, or one, whichever is greater.
F. Junior Accessory Dwelling Units.
1. Number of Units. In addition to accessory dwelling units pursuant to subsection (E)(1) of this section, one junior accessory dwelling unit is permitted on lots with an existing or proposed single-family principal dwelling, except where two detached accessory dwelling units have been constructed or are proposed pursuant to subsection (E)(1)(b) of this section.
2. Maximum Size. Junior accessory dwelling units shall have a maximum interior livable space of 500 square feet, which shall include an efficiency kitchen. A junior accessory dwelling unit may include separate sanitation facilities or shared sanitation facilities within the existing or proposed single-family principal dwelling.
Exhibit B
3. Location. Junior accessory dwelling units shall be constructed entirely within the walls of an existing single-family principal dwelling, including an attached garage, or a proposed single-family principal dwelling.
4. Entrance. A junior accessory dwelling unit shall have a separate exterior entrance from the existing or proposed single-family principal dwelling.
5. Owner Occupancy. At least one of the dwellings on the lot with a junior accessory dwelling unit must be the bona fide principal residence of at least one owner of the lot, as evidenced at the time of approval of the junior accessory dwelling unit by appropriate documents of title and residency. This requirement shall not apply if the junior accessory dwelling unit has separate sanitation facilities or property is owned by a governmental agency, land trust, or housing organization. If the property is owned by a nonliving legal entity not identified above, the owner shall provide documentation proving the individual(s) residing in at least one of the dwellings on the lot owns and therefore controls more than 50 percent of the nonliving legal entity.
6. Sanitation Facilities. The junior accessory dwelling unit shall include separate sanitation facilities or provide internal access to such facilities in the existing or proposed single-family principal dwelling.
7. Parking. No additional parking is required for junior accessory dwelling units.
8. Covenant. Prior to issuance of a certificate of occupancy for a junior accessory dwelling unit, the owner shall record a covenant in a form prescribed by the city attorney and provide a copy of the recorded covenant to the planning division. The covenant shall run with the land and provide for the following:
a. A prohibition on the sale of the junior accessory dwelling unit separate from the sale of the single-family principal dwelling;
b. A restriction on the size and attributes of the junior accessory dwelling unit consistent with this section;
c. A prohibition against renting the property for fewer than 30 consecutive calendar days; and
d. A requirement that either the principal dwelling or the junior accessory dwelling unit be the owner’s bona fide principal residence, unless the junior accessory dwelling unit has its own sanitation facilities or the owner is a governmental agency, land trust, or housing organization.
G. Appeals. Appeals filed by an applicant or property owner shall be initiated and processed pursuant to Chapter 18.510 CMC, but no other party shall have the right to appeal any ministerial decision issued in connection with the approval of an ADU or JADU and there shall be no appeal to the City Council per 18.510.010(A)(3). A final written determination on all appeals shall be issued within 60 business days after receipt of the written appeal and receipt of all fees.
Exhibit B
H. Environmental Review. As a ministerial project, an application for an accessory dwelling unit or junior accessory dwelling unit is exempt from environmental review under the California Environmental Quality Act (CEQA).
I. Severability and Savings. If any subsection, sentence, clause, phrase, or portion of this section is for any reason held to be invalid or unconstitutional by the decision of any court of competent jurisdiction, such decision shall not affect the validity of the remaining portions of this section, and each subsection, sentence, clause, phrase, or portion thereof, irrespective of the fact that any one or more subsections, sentences, clauses, phrases, or portions thereof be declared invalid or unconstitutional. In the event that the State Legislature amends any provision of the Planning and Zoning Law or other provision of state law respecting accessory dwelling units or junior accessory dwelling units so as to give rise to a conflict between state law and any provision or provisions of this section, such amendment shall prevail and apply in place of the conflicting provision or provisions hereof, and shall be deemed incorporated herein by this reference as though fully set forth.
Attachment 2
Concord Development Code Section 18.20.020 (Use classifications) “Dwelling, dwelling units, housing units” means a room or group of internally connected rooms that have sleeping, cooking, eating, and sanitation facilities but not more than one kitchen, and constitutes an independent housekeeping unit occupied by or intended for one household on a long-term basis, including the following:
“Accessory dwelling unit” means an attached, interior or detached dwelling unit which shallthat provides complete independent living facilities for one or more persons, is located on the same lot with an existing or proposed or existing single-family principal dwelling or multifamily principal dwelling, and includes permanent provisions for living, sleeping, eating, cooking, and sanitation. An accessory dwelling unit also includes an efficiency unit and a manufactured home, as defined below. “Duplex” means a single building on a lot that contains two dwelling units, each designed for occupancy by one household.
“Efficiency unit” is a small attached or detached accessory dwelling unit, with a maximum floor area of 150 square feet and which includes an efficiency kitchen and bathroom facilities, as specified by this title per the California Health and Safety Code Section 17958.1, as amended from time to time. “Junior accessory dwelling unit” is a type of accessory dwelling unit which has a maximum floor area of 500 square feet in size and is contained entirely within an existing or proposed single-family residence principal dwelling and may include separate sanitation facilities or share sanitation facilities with the existing residence.
Junior accessory dwelling units must be constructed within existing walls of the principal dwelling and must include an existing bedroom and an efficiency kitchen is subject to additional requirements specified in Section
18.200.180 (Accessory Dwelling Units).
“Manufactured home” means a structure that was constructed on or after June 15, 1976, is transportable in one or more sections, is eight body feet or more in width, or 40 body feet or more in length, in the traveling mode, or when erected on site is 320 or more square feet, is built on a permanent chassis and designed to be used as a single-family dwelling with or without a foundation when connected to the required utilities, and includes the plumbing, heating, air conditioning, and electrical systems. “Manufactured home” includes any structure that meets all of the requirements of this definition except the size requirements and with respect to which the manufacturer voluntarily files a certification and complies with the standards established under the Manufacturing Housing Construction and Safety Act of 1974 shall have the same meaning as defined in California Health and Safety Code Section 18007, as amended from time to time.
Attachment 3
18.200.180 Accessory dwelling units.
Where allowed by Division II of this title (Zoning Districts – Uses and Standards), aAccessory dwelling units and junior accessory dwelling units shall comply with the requirements of this section.
A. Purpose. The purpose of this section is to comply with California Government Code Sections 65852.2 and 65852.22Title 7, Division 1, Chapter 13, Section 66310 et seq., or successor statute, which provides for local jurisdictions to set development standards for development of accessory dwelling units and junior accessory dwelling units so as to advance the city’s housing goals by increasinge the supply of smaller and more affordable housing units, while ensuring they remain compatible with the existing neighborhood.
B. Definitions. These definitions only apply to this section (Accessory dwelling units) and in the event there is a conflict between this sectionthese definitions and other provisions of the Development Code or any provisions of the Concord Municipal Code, these definitions shall prevail.
“Accessory dwelling unit” means an attached interior or detached dwelling unit which shall provide complete independent living facilities for one or more persons, is located on the same lot with a proposed or existing single-family principal dwelling or multifamily principal dwelling, and includes permanent provisions for living, sleeping, eating, cooking, and sanitation. An accessory dwelling unit also includes an efficiency unit and a manufactured home, defined belowshall have the same meaning as defined in Chapter 18.20 CDC. “Architecturally and significant historic district” means one of the officially recognized historic landmarks or council-designated historic districts in the city. “Attached accessory dwelling unit” means an accessory dwelling unit occupying a proposed addition that is physically connected to and shares at least a portion of one wall with an existing or proposed single-family principal dwelling or multifamily principal dwelling. “Attic” means the unfinished space between the ceiling assembly and the roof assembly. “Basement” means a story that is not a story above grade plane. “Car share vehicle” means a motor vehicle available for short-term rental (less than 30 days), including an option for hourly rental.
“Conversion” means the act of modifying an existing legal building or a portion thereof an existing legal building from its existing use to an accessory dwelling unit. “Efficiency kitchen” includes a cooking facility with appliances, a food preparation counter, and storage cabinets, which are of reasonable size in relation to the size of the dwelling unit. “Efficiency unit” is a dwelling unit with a maximum floor area of 150 square feet and which shall include an efficiency kitchen and bathroom facilities, as specified pursuant to the California Health and Safety Code Section 17958.1 shall have the same meaning as defined in Chapter
18.20 CDC.
Attachment 3
“Exempt accessory dwelling unit” is an attached or detached dwelling measuring up to 800 square feet with four-foot side and rear yard setbacks that is not subject to lot coverage, floor area ratio, open space, and other development standards if applying such standards prohibits its construction.
“Existing” means a single-family principal dwelling, accessory structure, or a multifamily principal dwelling structure that was lawfully constructed prior to the receipt of an application of an accessory dwelling unit or junior accessory dwelling unit. “Interior accessory dwelling unit” is an accessory dwelling unit developed within the interior of an proposed or existing or proposed single-family principal dwelling (including attached garages) or within an existing accessory structure, but not including an attached accessory dwelling unit as defined herein.
“Junior accessory dwelling unit” is a type of dwelling unit which has a maximum floor area of 500 square feet in size, which shall include an efficiency kitchen (as defined in this subsection), and is contained within an existing or proposed single-family principal dwelling. A junior accessory dwelling unit may include separate sanitation facilities or share sanitation facilities with the existing or proposed single-family principal dwelling. Subject to subsection (E) of this section, junior accessory dwelling units must be constructed entirely within the walls of an existing or proposed single-family principal dwelling or an attached garage shall have the same meaning as defined in Chapter 18.20 CDC.
“Livable space” means a space in a dwelling intended for human habitation, including living, sleeping, eating, cooking, or sanitation.
“Living area” means the interior habitable area of a dwelling unit, including basements and attics but not garages and/or any habitable accessory structure. “Manufactured home” means a structure that was constructed on or after June 15, 1976, is transportable in one or more sections, is eight body feet or more in width, or 40 body feet or more in length, in the traveling mode, or when erected on site is 320 or more square feet, is built on a permanent chassis and designed to be used as a single-family principal dwelling with or without a foundation when connected to the required utilities, and includes the plumbing, heating, air conditioning, and electrical systems. “Manufactured home” includes any structure that meets all the requirements of this definition except the size requirements and with respect to which the manufacturer voluntarily files a certification and complies with the standards established under the Manufactured Housing Construction and Safety Act of 1974 shall have the same meaning as defined in California Health and Safety Code Section 18007, as amended from time to time.
“Multifamily principal dwelling(s)” means the legal structure(s)a principal dwelling consisting of two or more attached units, existing at the time an accessory dwelling unit application is received, that was established as the primary use and building(s) on a residential lot, to which the accessory dwelling unit may be established through and subordinate to. “Nonlivable space” means the interior spaces of existing multifamily principal dwelling structures that are not used for livable space, including, but not limited to, storage rooms, boiler rooms, passageways, attics, basements, or garages.
Attachment 3
“Owner” means any person with a legal interest in real property, as shown in the last equalized assessment roll for city taxes, accompanied with a right to occupy said property. For purposes of this section, “owner” shall not mean a tenant or lessee of the real property. “Preapproved accessory dwelling units” means a collection of architectural and building permit-ready plan sets (including structural calculations) for detached accessory dwelling units of varying unit types, architectural designs, and sizes approved and provided by the city and made free to the public.
“Principal dwelling(s)” means the residential dwelling unit(s) that is (are), or will be, legally established as the primary use and building(s) on a residential lot, to which the accessory dwelling unit may be established through and subordinate to. “Proposed dwelling” means a dwelling that is the subject of a permit application and that meets all applicable laws.
“Public transit” means a location where the public may access buses, trains, subways, and other forms of transportation that charge set fares, and run on fixed routes, including, but not limited to, a bus stop or train station.
“Sanitation facilities” means a bathroom containing a sink, toilet, and a shower or bathtub. “Setback, corner-side” means a side lot line of a corner lot that is adjacent to a street, between the front and rear lot lines, and the area between a property line and building or structure, which must be kept clear or open.
“Single-family principal dwelling” means the legal single-family residential dwelling unit that is established or will be established as the primary use and building on a residential lot, to which the accessory dwelling unit may be established through and subordinate to. “Story above grade plane” means any story having its finished floor surface entirely above grade plane, or in which the finished surface of the floor next above is either of the following: (1) more than six feet above grade plane; or (2) more than 12 feet above the finished ground level at any point.
C. General Requirements Applicable to Accessory Dwelling Units. The following requirements shall apply to all accessory dwelling units and junior accessory dwelling units.
1. Building Permit Required. Accessory dwelling units and junior accessory dwelling units shall comply require a building permit in compliance with the California Building Code as set forth in CMC Title 15 for dwellings. A building permit application for an accessory dwelling unit or a junior accessory dwelling unit shall be accompanied by the appropriate application fee and shall be subject to the following procedures:. a. The building permit application shall be ministerially processed within 60 calendar days of receipt of a complete application and shall be approved if the proposed unit conforms to the requirements of this section. Within 15 business days of receipt, anAn incomplete application will either be deemed complete or incomplete. If the application is deemed incomplete it will be returned with an complete explanation of the
Attachment 3
deficiencies and additional information that is required to remedy the application. An applicant or property owner may appeal a determination that an application is incomplete pursuant to subsection (G) of this section.
b. The city shall grant a delay toll the 60-day timeframe in processing the application if requested in writing by the applicant or property owner. Further, c. iIf the building permit application for an accessory dwelling unit or a junior accessory dwelling is submitted with a permit application to create a single-family principal dwelling or multifamily principal dwelling on the lot, the application for the junior accessory dwelling unit or junior accessory dwelling unit will not be acted upon until the application for the new single-family principal dwelling or multifamily principal dwelling is approved or denied, but thereafter shall be processed within 60 calendar days after approval of the application for the new single-family principal dwelling and approved if it meets the requirements of this section.
d. Occupancy of the junior accessory dwelling unit or junior accessory dwelling unit shall not be allowed permitted until the city approves occupancy of the single-family principal dwelling. This provision shall not apply to accessory dwelling units substantially damaged or destroyed by an event referenced in a state of emergency proclaimed by the Governor of California, subject to the provisions of California Government Code Section 66328.
2. Permanent Foundation. A permanent foundation system in accordance with the Uniform Building Code (UBC) shall be required for all accessory dwelling units.
32. Density. An accessory dwelling unit or junior accessory dwelling unit that conforms to the standards of this section shall not be considered to exceed the allowable residential density for the lot upon which it is located.
43. Subdivision.
a. No subdivision of land or air rights shall be allowed occur that would result in the accessory dwelling unit or junior accessory dwelling unit existing on a separate lot from the single-family principal dwelling or multifamily principal dwelling. An accessory dwelling unit or junior accessory dwelling unit may not be sold independently of the single-family principal dwelling or multifamily principal dwelling but may be leased separately.
b. An accessory dwelling unit and a single-family principal dwelling may be owned by multiple owners as tenants in common if the single-family principal dwelling and accessory dwelling unit were developed by a qualified nonprofit corporation, as that term is defined in and pursuant to California Government Code Section 65852.2666340, and the transaction meets the requirements of California Government Code Section 65852.2666341 or successor statute.
54. Short-Term Rentals Prohibited. The An accessory dwelling unit or junior accessory dwelling unit shall not be rented for a term of less than 30 calendar days.
Attachment 3
65. Zoning Conditions and Building Code Requirements. The city will not deny a building permit application for an accessory dwelling unit or a junior accessory dwelling unit because of nonconforming zoning conditions, building code violations, or unpermitted structures on the property that do not present a threat to public health and safety and are not affected by the construction of the accessory dwelling unit.
76. Allowed Permitted Use. Accessory dwelling units and junior accessory dwelling units are allowed shall be permitted in the following zoning districts that allow for single-family or multifamily principal dwelling residential uses. to the extent required by California Government Code Section 66314 et seq.
Zoning District
R (Residential)
NTS (North Todos Santos)
CO (Community Office)
CMX (Commercial Mixed-Use)
NC (Neighborhood Commercial)
DP (Downtown Pedestrian)
DMX (Downtown Mixed-Use)
PD (Planned Development)*
*If the specific PD permit allows single-family or multifamily residential uses (including multifamily uses within a mixed-use building).
7. Delay of Enforcement of Building Standards. The owner of an accessory dwelling unit or junior accessory dwelling unit may request that correction of any violation of building standards be delayed pursuant to Government Code Section 66331.
8. Demolition Permit. A detached garage that is to be replaced with an accessory dwelling unit shall have the demolition permit issued concurrently with the accessory dwelling unit permit.
9. Decks, Porches, Covered Patios, Stairs and Landings. Such features, if more than 18 inches above grade, shall be permitted subject to the following requirements:
a. The area of such features shall not exceed, either individually or cumulatively, 40 square feet or five percent of the livable space of the accessory dwelling unit to which they are attached, whichever is less. An exception to this standard may be granted through the design and site review process.
b. No portion of such features shall project into a required setback, whether required by this section or by the underlying zoning district.
10. Roof Projections. No eave or other roof element shall project more than 24 inches into a required setback.
Attachment 3
D. Requirements Applicable to Non-Exempt Accessory Dwelling Units. The following requirements shall apply to all accessory dwelling units except “state-exempt” units in compliance with subsection (E) below and junior accessory dwelling units in compliance with subsection (F) below. Accessory dwelling units that qualify as “state-exempt” shall not be subject to this subsection.
1. Number of Units. One non-exempt accessory dwelling unit shall be permitted on a lot with a single-family or multi-family dwelling, provided that there are no other accessory dwelling units (other than a junior accessory dwelling unit) existing or proposed on the lot.
82. Minimum Size. The living area of an accessory dwelling unit shall be at least 150 square feet in size., and
3. Maximum Size. The interior livable space of an accessory dwelling unit shall not exceed the following:
lesser of 50 percent of the floor area of the principal dwelling or:
a. One thousand square feet on lots with a net area of less than 12,000 square feet, excluding up to 230 total square feet for attached garages or carports. b. One thousand two hundred square feet on lots with a net area of 12,000 square feet or greater, excluding up to 460 total square feet for attached garages or carports. c. For attached accessory dwelling units, 50 percent of the floor area of the principal dwelling, or the applicable limit in subsection (D)(3)(a) or (b), whichever is less.
This limitation will be waived if it limits the size of the accessory dwelling unit to less than 800 square feet.
94. Zoning Development Standards. Accessory dwelling units shall meet all provisions of the zoning district in which they are located and all other applicable provisions of the development code, except where such provisions would conflict with this section. Such provisions shall be waived in the amount necessary to accommodate an accessory dwelling unit of up to 800 square feet in floor area.
105. Design. The following standards shall apply to all accessory dwelling units except pre-approved accessory dwelling units constructed pursuant to pre-approved plans provided by the City free of charge:
a. Matching Roof Pitch and Form, Colors, and Materials and Roof Type. Colors and materials for any The accessory dwelling unit shall be consistent integrated with the existing and/or proposed principal dwelling, by using meeting at least two of the following three approachescriteria, unless an exception is granted through the design and site review process:
i. A minimum ofAt least one matching exterior paint or stain color from the color palette ofmatches an exterior color on the principal dwelling.
Attachment 3
ii. A minimum ofAt least two matching exterior materials (e.g., stucco, horizontal siding, wood window trim, etc.) from thematch exterior materials palette ofon the principal dwelling.
iii. AThe matching roof slope form (e.g., hip, gable, etc.) and to that of the dominant roof pitch asmatch the roofor form and pitch covering the greatest portion of the principal dwellingmain building.
Alternatively, if the planning division determines that the design does not meet two of the above approaches, a discretionary design and site review process is required. b. Exterior Entrances and Staircases.
i. All attached accessory dwelling units, shall have a separate exterior entrance from that of the single-family principal dwelling. that isThis entrance shall not be located on the same side, or facing in the same direction, as the entrance for the principal dwelling, or an exterior staircase that is visible from the street or public right-of-way.
This requirement shall not apply where unless the accessory dwelling unit entrance is not visible from an adjoining street or public right-of-waythe principal dwelling or the topography, fencing, or existing landscaping of the subject property effectively screens the accessory dwelling unit entrance from all street views. ii. No attached accessory dwelling unit shall have an exterior staircase that is visible from an adjoining street or public right-of-way.
iii. For purposes of this subsection, “visible from an adjoining street or public right-of-way” means that a straight line of sight, unobstructed by land or any legally authorized permanent structure (excluding all vegetation and landscaping), can be drawn from any point located between 3 feet and 6 feet above the surface of any public right-of-way or street (including sidewalks) within 50 feet of the subject property lines, to any portion of the proposed exterior entrance or stairway. c. Upper-Story Windows-to-Window Privacy.
i. Standard. Avoid direct line of sight to existing neighboring units by staggering window and door placementNo accessory dwelling unit window, including windows within exterior doors (the “subject window”), where the finished floor is located more than 8 feet above finished grade, shall be placed such that a residential window on an adjoining property intersects the subject window’s restricted field of vision. Due to its temporary nature, vegetation shall have no bearing on the applicability of this standard.
ii. Definition. “Restricted field of vision” means the three-dimensional spatial volume projecting outward from the exterior surface of the subject window, terminating at a horizontal distance of 25 feet from the horizontal midpoint of the subject window’s structural window opening at five feet above the finished floor, and bounded by the following planes beginning five feet above the finished floor:
Attachment 3
(a) An upper plane that extends horizontally (0 degrees) and is bounded by two lines extending from the leftmost and rightmost edges of the structural window opening, with said lines diverging outward by 15 degrees from a line drawn perpendicular to the adjacent exterior wall;
(b) A lower plane that slopes downward at a 45-degree angle relative to the upper plane; and
(c) Two vertical side planes that connect the boundaries of the upper and lower planes, creating a total internal horizontal cone of 30 degrees plus the width of the structural window opening.
iii. Exemptions. This standard shall not apply when:
(a) The subject window has a permanent finished sill height of no less than 6 feet above the interior finished floor level.
(b) The subject window is permanently manufactured and installed with frosted, patterned, or acid-etched glass that achieves a minimum haze value of 70 percent when tested in accordance with ASTM D1003 (or an equivalent international standard). Removable aftermarket privacy films, decals, or superficial tints do not qualify.
d. Porches in Front and Corner Side Yard Setbacks. Attached accessory structures (i.e., porches) for exempt accessory dwelling units located in the front or corner side yard setback shall be no more than five percent of the size of the livable area space of the exempt ADU up to 40 square feet.
e. Design and Site Review. Accessory dwelling units shall be exempt from design and site review requirements of Chapter 18.415 CDC, except as specified in this subsection (C)(10).
116. Parking. The parking required for an accessory dwelling unit is in addition to the required off-street parking for the single-family or multifamily principal dwelling.One off-street parking space per accessory dwelling unit shall be provided, subject to the following provisions:
a. Parking for Accessory Dwelling Unit. Except as provided in subsection (C)(11)(b) of this section, one off-street parking space is required per accessory dwelling unit or per bedroom, whichever is less. Off-street parking spaces shall be provided as follows:
Parking for an accessory dwelling unit shall be in addition to the required off-street parking for the principal dwelling.
ib. Parking spaces may be uncovered, tandem, and/or located in the front yard setback if contained within the space of an existing or proposed driveway, unless findings can be made that such parking is not feasible based uponwould not comply with objective standards related to fire and life safety or topography conditionsmaximum slope.
Attachment 3
iic. An existing driveway may be widened to accommodate the required parking space(s), provided the expansion does not result in more than 50 percent of the required front setback or yard area (whichever is greater) being paved or covered with impervious surface.
iiid. Parking for the accessory dwelling unit may not result in or include additional curb cuts unless specifically permitted pursuant to CMDC 18.160.100(A). be. Parking Exemption. Parking for an accessory dwelling unit is shall not be required in any of the following instances:
i. The accessory dwelling unit is located within one-half mile walking distance of public transit.
ii. The accessory dwelling unit is located within a designated architecturally and historically significant historic district.
iii. The accessory dwelling unit is part of the proposed or existing principal dwelling or conversion of an accessory structure.
iv. When oOn-street parking permits are required by the City but not offered to the occupant of the accessory dwelling unit.
v. When there is aA car share vehicle site is located within one block of the accessory dwelling unit.
cf. Demolished Removal of Existing Parking. When a garage, carport, uncovered, or covered or uncovered parking structure space is demolished removed in conjunction with the construction of or conversion to an accessory dwelling unit or converted to an accessory dwelling unit, the demolished removed parking space is shall not be required to be replaced.
127. Hillside Development. The living areas of accessory dwelling units proposed on any hillside lot are exempt from the hillside development use permit requirements described in Chapter 18.300 CMDC. This exemption shall not apply to Oother attached or detached areas, buildings or structures proposed as part of an accessory dwelling unit, including, but not limited to, attached or detached or attached garages, sheds, or playhouses are not exempt from the hillside development use permit process, when applicable. 138. Creek and Riparian Protection. Accessory dwelling units proposed within creek or riparian areas as defined in Chapter 18.305 CMDC shall comply with the objective development standards in CMDC 18.305.040 but are exempt from the design and site review application requirement.
14. Delay of Enforcement of Building Standards.
a. Prior to January 1, 2030, the owner of an accessory dwelling unit that was built before January 1, 2020, may submit an application to the building official requesting that correction of any violation of building standards be delayed for five years. For purposes
Attachment 3
of this section, “building standards” refers to those standards enforced by permitting agencies under the authority of Section 17960 of the California Health and Safety Code. b. The building official shall grant the application if the building official determines that enforcement of the building standard is not necessary to protect health and safety. In making this determination, the building official shall consult with the fire marshal. c. No applications pursuant to this section shall be approved on or after January 1, 2030.
However, any delay that was approved by the city before January 1, 2030, shall be valid for the full term of the delay that was approved at the time of the approval of the application.
d. Until January 1, 2030, any notice to correct a violation of a building standard that is issued to the owner of an accessory dwelling unit built before January 1, 2020, shall include a statement that the owner has a right to request a delay in enforcement of the building standard for an accessory dwelling unit pursuant to this section. e. This subsection (C)(14) shall remain in effect until January 1, 2035, and as of that date is repealed.
15. Owner Occupancy.
a. Accessory Dwelling Unit. No owner occupancy is required for accessory dwelling units except for building permit applications received after December 31, 2024, whereby one of the dwellings on the lot must be the bona fide principal dwelling of at least one owner of the lot containing the accessory dwelling unit, as evidenced at the time of approval of the accessory dwelling unit by appropriate documents of title and residency. b. Junior Accessory Dwelling Unit. Unless the property is owned by a governmental agency, land trust, or housing organization, at least one of the dwellings on the lot with a junior accessory dwelling unit must be the bona fide principal residence of at least one owner of the lot, as evidenced at the time of approval of the junior accessory dwelling unit by appropriate documents of title and residency. If the property is owned by a nonliving legal entity not identified above, meeting the above bona fide principal residence requirement shall require documentation proving the individual(s) residing in at least one of the dwellings on the lot owns and therefore controls more than 50 percent of the nonliving legal entity.
169. Setbacks.
a. Interior Side, Corner Side and Rear Setbacks. Accessory dwelling units shall provide interior side, corner side, and rear setbacks of at least four feet. b. Front and Corner-Side Setbacks. Accessory dwelling units shall comply with the front and corner-side setbacks required for the principal dwelling. In cases where the principal dwelling encroaches into the setback, the accessory dwelling unit may encroach to the same extent as the principal dwelling. This requirement shall be waived in the amount necessary to accommodate an accessory dwelling unit of up to 800 square feet in floor area.
Attachment 3
c. Replacement of Existing Structures. No setback shall be required for a structure constructed in the same location and to the same dimensions as an existing structure that is converted to an accessory dwelling unit or to a portion of an accessory dwelling unit. d. Setbacks from Other Structures. Detached accessory dwelling units shall be set back at least five feet from a primary dwelling and/or any accessory structure. 1710. Height.
a. Attached Accessory Dwelling Units. The height of an attached accessory dwelling unit shall not exceed 25 feet or the height limitation that applies to the single-family principal dwelling or multifamily principal dwelling, whichever is lower.
However,Furthermore, in no case shall the accessory dwelling unit may not height exceed two stories.
b. Detached Accessory Dwelling Units. The height of a detached accessory dwelling unit shall not exceed 16 feet, except as follows:
i. Sixteen feet on a lot with an existing or proposed single-family principal dwelling or multifamily principal dwelling. 18 feet shall be permitted for Ssingle-story accessory dwelling units may exceed 16 feet in height when the planning division determines additional height is necessary to provide greater compatibility withmatch the primary roofline, pitch or architectural style of the principal dwelling, including, but not limited to, features such as gables, shed roofs, and towers;. ii. Eighteen18 feet shall be permitted on a lot with an existing or proposed single-family principal dwelling or multifamily principal dwelling if the lot is within one-half mile walking distance of a major transit stop or a high-quality transit corridor, as those terms are defined in Public Resources Code Section 21155. An additional two feet in height, up to 20 feet, may shall be permitted to accommodate a match the primary roof pitch on the accessory dwelling unit that is aligned with the roof pitch of the single-family or multifamily principal dwelling; or. iii. Eighteen 18 feet shall be permitted on a lot with a n existing or proposed multifamily, multistory principal dwelling.
iv. For the purposes of this subsection (D)(10)(b), “match the primary roof pitch of the primary dwelling” means duplicating the slope ratio (rise-to-run) of the roof plane covering the greatest portion of the principal dwelling, within a maximum allowable variance of +/- 0.5:12.
iv. No height limit shall apply to the conversion of an existing detached accessory structure to an accessory dwelling unit.
c. Accessory dwelling units located on the second story of an existing or proposed accessory structure may exceed 16 feet in height, provided they maintain interior and corner side setbacks of at least 10 feet and meet the height and rear setback standards applicable to the principal dwelling.
Attachment 3
18. Exemptions From Design and Development Standards.
a. Accessory dwelling units that meet the standards in subsection (D)(2) of this section do not have to meet the additional development and design standards in the underlying zoning district or in this section to be permitted.
b. Limits on size based on a percentage of the proposed or existing principal dwelling, lot coverage, floor area ratio, front setback, open space, and size must permit or shall be waived to allow a detached or attached accessory dwelling unit up to 800 square feet in size with four-foot side and rear yards, if the proposed accessory dwelling unit is in compliance with all other development standards.
DE. Number and Types of Accessory Dwelling Units. The following types of accessory dwelling units shall be allowed in areas zoned to allow single-family or multifamily principal dwelling uses or in circumstances with a lawfully constructed single-family or multifamily principal dwelling in other zoning districts, subject to the requirements and standards of this section State-Exempt Accessory Dwelling Units. The following provisions shall apply to accessory dwelling units classified as “state-exempt” pursuant to California Government Code Section 66323 or successor statute:
1. Accessory Dwelling Units Subject to Development and Design Standards. One accessory dwelling unit that complies with the development and design standards in subsection (C) of this section shall be permitted on a lot with an existing or proposed single-family or multifamily principal dwelling.
2. Exempt Accessory Dwelling Units. If an accessory dwelling unit does not exist or is not proposed on a lot pursuant to subsection (D)(1) of this section, the following shall be ministerially permitted on a lot:
1. Lots with Single-Family Dwellings. Any of the following accessory dwelling units, or any combination thereof, shall be permitted on lots with a single-family principal dwelling:
a. One interior accessory dwelling unit and one junior accessory dwelling unit per lot with a proposed or existing single-family principal dwelling if all ofsubject to the following applyprovisions:
i. The interior accessory dwelling unit has eExterior access separate from the proposed or existing or proposed single-family principal dwelling. ii. The side and rear setbacks of the interior accessory dwelling unit are sufficient for fire and safety.
iii. If developed within an accessory structure, the accessory structure may include an expansion of not more than 150 square feet beyond the same physical dimensions as the existing accessory structure to accommodate ingress and egress. iv. The junior accessory dwelling unit complies with the requirements of subsection (E) of this section.
Attachment 3
b. One Up to two detached, new construction accessory dwelling units, subject to the following requirements: and one junior accessory dwelling unit complying with the requirements of subsection (E) of this section per lot with a proposed or existing single-family principal dwelling if the accessory dwelling unit has at least four-foot i. The accessory dwelling unit provides iInterior side, corner side, and rear yard setbacks of at least four feet shall be provided for each accessory dwelling unit.; does not exceed
ii. The iIinterior livable space of each accessory dwelling unit shall not exceed 800 square feet. in floor area; and does not exceed
iii. Each accessory dwelling unit shall comply with the allowed height in applicable height standard in subsection (CD)(181710)(b) of this section. An accessory dwelling unit’s status as “state-exempt” shall have no bearing on the applicability of this requirement.
2. Lots with Multifamily Dwellings. The following accessory dwelling units shall be permitted on lots with a multifamily principal dwelling, provided that detached accessory dwelling units shall be limited to 800 square feet of interior livable space:
ca. Up to two detached accessory dwelling units on a lot with a proposed multifamily principal dwelling. or
b. Up to eight detached accessory dwelling units on a lot with an existing multifamily principal dwelling, if the number of accessory dwelling units does not exceed the number of existing units on the lot and if the accessory dwelling units do not exceed the allowed height in subsection (C)(18) of this section and have at least four-foot have side and rear setbacks of at least four feet and height in compliance with subsection (D)(10)(b) of this section.
dc. A lot with an existing multifamily principal dwelling may also contain accessory dwelling units converted from portions of the building that are not used as livable space, including, but not limited to, storage rooms, boiler rooms, hallways, attics, basements, or garages. The maximum number of accessory dwelling units permitted is equivalent to up toshall be 25 percent of the number of existing, legally permitted units in the multifamily principal dwelling, or one, whichever is greater.
EF. Junior Accessory Dwelling Units Development Regulations.
1. Number of Units. In addition to accessory dwelling units pursuant to subsection (E)(1) of this section, Oone junior accessory dwelling unit is allowed permitted on lots zoned to allow with an existing or proposed single-family principal dwellings and is not permitted on a property with a multifamily principal dwelling, except where two detached accessory dwelling units have been constructed or are proposed pursuant to subsection (E)(1)(b) of this section.
2. Maximum Size. Junior accessory dwelling units shall have a maximum interior livable space of 500 square feet, which shall include an efficiency kitchen (as defined in this
Attachment 3
subsection). A junior accessory dwelling unit may include separate sanitation facilities or shared sanitation facilities within the existing or proposed single-family principal dwelling.
3. Location. Junior accessory dwelling units shall be constructed entirely within the walls of an existing single-family principal dwelling, including an attached garage, or a proposed single-family principal dwelling.
4. Entrance. A junior accessory dwelling unit shall have a separate exterior entrance from the proposed or existing or proposed single-family principal dwelling unit.
5. Owner Occupancy. At least one of the dwellings on the lot with a junior accessory dwelling unit must be the bona fide principal residence of at least one owner of the lot, as evidenced at the time of approval of the junior accessory dwelling unit by appropriate documents of title and residency. This requirement shall not apply if the junior accessory dwelling unit has separate sanitation facilities or property is owned by a governmental agency, land trust, or housing organization. If the property is owned by a nonliving legal entity not identified above, the owner shall provide documentation proving the individual(s) residing in at least one of the dwellings on the lot owns and therefore controls more than 50 percent of the nonliving legal entity.
26. Sanitation Facilities. The junior accessory dwelling unit may, but is not required to, shall include separate sanitation facilities. Aor provide internal access to a bathroom is required, which may be part of the junior accessory dwelling unit or locatedsuch facilities in the existing or proposed single-family principal dwelling. If provided as part of the single-family principal dwelling, the junior accessory dwelling unit shall have internal access to the single-family principal dwelling.
37. Parking. No additional parking is required for junior accessory dwelling units.
48. Covenant. Prior to issuance of a certificate of occupancy for a junior accessory dwelling unit, the owner shall record a covenant in a form prescribed by the city attorney, and provide a copy of the recorded covenant to the planning division. The covenant which shall run with the land and provide for the following:
a. A prohibition on the sale of the junior accessory dwelling unit separate from the sale of the single-family principal dwelling;
b. A restriction on the size and attributes of the junior accessory dwelling unit consistent with this section;
c. A prohibition against renting the property for fewer than 30 consecutive calendar days; and
d. A requirement that either the principal dwelling or the junior accessory dwelling unit be the owner’s bona fide principal residence, unless the junior accessory dwelling unit has its own sanitation facilities or the owner is a governmental agency, land trust, or housing organization.
Attachment 3
A copy of the recorded covenant shall be filed with the community development department prior to issuance of a certificate of occupancy.
FG. Appeals. Notwithstanding Chapter 18.510 CMDC, No appeals by persons other than the applicant or the subject property’s owner are not permitted. All permits for accessory dwelling units are based on a ministerial review process and evaluation for conformance with this section.
All approval or denial determinations are final.Appeals filed by an applicant or property owner shall be initiated and processed pursuant to Chapter 18.510 CMC, except that the appellate body shall be the planning commission, which shall provide a final written determination for the appeal within 60 business days after receipt of the written appeal.
GH. Environmental Review. As a ministerial project, an application for an accessory dwelling unit or junior accessory dwelling unit is exempt from environmental review under the California Environmental Quality Act (CEQA).
HI. Severability and Savings. If any subsection, sentence, clause, phrase, or portion of this section is for any reason held to be invalid or unconstitutional by the decision of any court of competent jurisdiction, such decision shall not affect the validity of the remaining portions of this section, and each subsection, sentence, clause, phrase, or portion thereof, irrespective of the fact that any one or more subsections, sentences, clauses, phrases, or portions thereof be declared invalid or unconstitutional. In the event that the State Legislature amends any provision of the Planning and Zoning Law or other provision of state law respecting accessory dwelling units or junior accessory dwelling units so as to give rise to a conflict between state law and any provision or provisions of this section, such amendment shall prevail and apply in place of the conflicting provision or provisions hereof, and shall be deemed incorporated herein by this reference as though fully set forth.
Attachment 4
Summary Table of ADU Ordinance Revisions
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
A. Purpose Government Code
reference updated to
reflect current location of
state ADU laws.
Required by SB 477 (2024).
A. Purpose Reference to “successor
[state] statue” added.
Best practice; preserves linkage
to state ADU laws in the event
such laws are relocated or
expanded.
B. Definitions Definitions for “accessory
dwelling unit,” “attic,”
“basement,” “efficiency
unit,” “junior accessory
dwelling unit,”
“manufactured home,”
“setback, corner side,”
and “story above grade
plane” deleted.
These terms are also defined
(identically) in the main
Development Code definitions
section (18.20.030); deleting the
duplicative definitions shortens
the ADU Ordinance and helps
avoid inconsistencies in the event
of future amendments.
B. Definitions Definition of “attached
accessory dwelling unit”
revised to clarify that
such ADUs are located
within a proposed
addition to an existing
primary dwelling.
Previous definition included
“proposed” primary dwellings,
which was not logical, and
allowed conversion of existing
space to qualify as an attached
ADU, which conflicts with state
law which treats conversion ADUs
differently.
B. Definitions Definition of “exempt
accessory dwelling unit”
deleted.
Main purpose of definition was to
provide regulations; these have
relocated to subsection (E) of the
ordinance.
B. Definitions Definition of “exempt
accessory dwelling unit”
deleted.
Purpose of definition was to
provide regulations. In ordinance
drafting, it is a best practice not to
use definitions as regulations,
therefore these regulatory
provisions have been relocated to
subsection (E).
1 Subsection references are based on revised numbering except where a subsection has been entirely deleted.
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
B. Definitions Definition of “junior
accessory dwelling unit”
in 18.20.030 revised to
remove regulatory
provisions (e.g. maximum
size of 500 square feet,
requirement for an
efficiency kitchen).
Consistent with the best practice
in the previous row, regulatory
provisions have been relocated to
subsection (F) with the other
JADU development standards.
B. Definitions Definition of “livable
space” added.
Required by SB 1211 (2024).
B. Definitions Definition of
“manufactured home”
shortened to refer to
definition in state Health
and Safety Code, rather
than quoting the definition
in its entirety.
Shortens the ADU Ordinance and
ensures consistency with the
state definition in the event it is
later amended. Does not
substantially impact staff or
customer time as the state
definition is easily accessible on
the internet.
B. Definitions Definition of “multifamily
principal dwelling”
shortened, new definition
of “principal dwelling”
added, and definition of
“single-family dwelling”
deleted.
These changes consolidate
provisions applicable to both
multifamily and single-family
dwellings into a single definition,
and retain only the language that
distinguishes the state’s definition
of “multifamily” from the City’s
(i.e., two or more units vs. three or
more). The definition of “single-family” is no longer needed as it is consistent with the existing
definition in CDC 18.20.030.
B. Definitions Definition of “nonlivable
space” deleted.
Purpose of definition is to
implement regulations for state-exempt multifamily conversion ADUs. These provisions are now
included in subsection (E)(2)(c),
consistent with the best practice
described above.
B. Definition Definition of
“preapproved accessory
dwelling units” deleted.
Purpose of definition is to
implement regulations for such
ADUs. These provisions are now
included in subsection (D)(5),
consistent with the best practice
described above.
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
B. Definition New definition of
“proposed” added.
This is a key term in the
ordinance and should be defined.
B. Definition New definition of
“sanitation facilities”
added.
This is a key term in the JADU
standards and should be defined.
State law does not define the
term.
C. General
Requirements
This subsection
previously included
requirements which are
not applicable to “state
exempt” ADUs under
Gov. Code 66323, e.g.,
standards for maximum
size, design, and privacy.
Such requirements have
been relocated to
subsection D
(Requirements Applicable
to Non-Exempt
Accessory Dwelling
Units).
Required by Gov. Code 66323.
C(1). Building
Permit Required
60-day processing
deadlines clarified to be
“60 calendar days” (not
business days).
Because state law is silent on
whether these are calendar days
or business days, but uses
business days on other
provisions, calendar days applies.
C(1). Building
Permit Required
Reference to appeal
option added.
Required by SB 543 (2025).
C(1). Building
Permit Required
Detached ADUs must be
granted occupancy
approval prior to the
primary dwelling when
the primary dwelling was
destroyed in a state-declared emergency.
Required by AB 462 (2025).
C(2). Permanent
Foundation
Provision deleted. Provision is unnecessary as the
Building Code requires a
permanent foundation for ADUs,
and ADUs must comply with the
Building Code per subsection
(C)(1).
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
C(7). Delay of
Enforcement of
Building Standards
Detailed provisions
regarding legalization of
ADUs built before 2020
have been replaced with
a reference to state Gov.
Code 66331.
These state-mandated provisions
are highly prescriptive and
detailed, are not frequently used,
and could be subject to further
changes. Therefore it is more
appropriate to capture these
provisions by reference rather
than repeating them in the City
ordinance.
C(8). Removal of
Existing Parking
Uncovered parking
removed in conjunction
with construction of an
ADU is not required to be
replaced (matching the
current provision for
removal of covered
parking).
Required by SB 543 (2025).
C(9). Decks,
Porches, Stairs and
Landings
This new provision
relocates and expands
existing rules for attached
decks and porches,
which currently apply only
to state-exempt ADUs.
The allowance for attached decks
and porches was created to give
state-exempt ADUs more
flexibility to provide less “boxy”
designs. The same policy goal
should also be applied to non-state-exempt ADUs.
C(10). Eave
Projections
This new provision
specifies that eaves may
project up to 24 inches
into a required setback.
Additional setbacks
and/or fire protection may
apply under the Building
Code.
There is currently no allowance
for eave projections on state-exempt ADUs. Such an allowance will encourage more attractive
design, better weather protection
and energy savings. This change
will also provide greater clarity on
eave projections for non-exempt
ADUs, which are currently
addressed through a general
reference to “all other applicable
provisions of the development
code” in subsection (C)(9).
C(15). Owner
Occupancy
Provision for ADUs
deleted; provision for
JADUs relocated to
subsection (F).
Deletion of ADU provision
required by AB 976 (2023); JADU
provision relocated since
subsection (D) no longer applies
to state-exempt ADUs.
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
D. Requirements
Applicable to Non-Exempt Accessory
Dwelling Units
New subsection created
for requirements that do
not apply to “state
exempt” ADUs.
Required by Gov. Code 66323.
D(1). Number of
Units
Provisions added to allow
non-state-exempt ADUs
only when there are no
existing or proposed
ADUs on the lot, and
stating that if a proposed
non-exempt ADU also
qualifies as state-exempt,
it shall be counted as
state-exempt.
Consistent with the intent of the
current ADU Ordinance provision
(D(2)) allowing state-exempt
ADUs only when there are no
existing or proposed ADUs.
Although the current provision
conflicts with Gov. Code 66323,
state ADU law does not prohibit
such provisions for non-exempt
ADUs.
D(3)(a). Maximum
Size
Provision limiting ADUs to
50 percent of the
principal dwelling’s floor
area revised to apply only
to attached ADUs.
Consistent with state ADU law
which requires this standard only
for attached ADUs. Detached
ADUs are still subject to
maximum size limits, and
attached (new construction) ADUs
raise greater concerns with regard
to architectural compatibility with
an existing dwelling.
D(4). Zoning
Development
Standards
Provision added to waive
development standards
“in the amount necessary
to accommodate an
[ADU] of up to 800
square feet in floor area.”
Required by Gov. Code
66321(b)(3).
D(5)(a). Design –
Matching Colors,
Materials and Roof
Type
Standards have been
revised to be more
“objective” as defined by
state ADU law.
Previous language did not fully
conform to Gov. Code 66313(i)
and 66314(b).
D(5)(b). Design –
Exterior Entrances
and Staircases
New language added to
create objective method
for determining when
such entrances and
staircases are “visible
from the street or public
right-of-way.”
Previous language did not fully
conform to Gov. Code 66313(i)
and 66314(b).
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
D(5)(b). Design –
Window-to-Window
Privacy
Previous language
(“avoid direct line of sight
to existing neighboring
units by staggering
window and door
placement”) replaced with
objective language
clearly defining when the
privacy standard applies
(windows at floors over 8
feet above grade), and
how the standard is
measured (geometric
planes projecting from
the subject window).
Previous language did not
conform to Gov. Code 66313(i)
and 66314(b). New language
preserves Council’s intent to
prevent privacy impacts from
upper ADU windows.
D(6)(b). Parking Language regarding
infeasibility of parking
due to “fire and life safety
or topography conditions”
revised to be more
objective.
Previous language did not fully
conform to Gov. Code 66313(i)
and 66314(b).
D(6)(e)(iii). Parking Exemption for state-exempt ADU types deleted.
This exemption is no longer
needed as state-exempt ADUs
have been exempted from the
entire subsection (D).
D(8). Creek and
Riparian Protection
Reference to “objective”
creek standards of CMC
18.305 added.
Required by Gov. Code 66313(i)
and 66314(b).
D(9)(a). Setbacks –
Interior Side,
Corner Side and
Rear Setbacks
Corner side setbacks
added to provision for
interior side and rear
setbacks.
Required by Gov. Code
66314(c)(7). State ADU law does
not differentiate between interior
and corner side setbacks;
therefore, 4 feet is the maximum
requirement for all side setbacks.
D(9)(c). Setbacks –
Replacement of
Existing Structures
Provision added waiving
setbacks for a new ADU
that replaces an existing
structure with same
location and dimensions.
Required by Gov. Code
66314(c)(7).
D(10)(b). Height –
Detached
Language added to make
exception for 2 additional
Recommended to increase clarity
and ensure compliance with Gov.
Code 66313(i) and 66314(b).
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
Accessory
Dwelling Units
feet of height more
objective.
C(18). Exemptions
from Design and
Development
Standards
Language removed. Provision in (18)(a) no longer
needed due to separation of
general provisions (subsection
(C)) and non-state-exempt
provisions (subsection (D)).
Provision in (18)(b) relocated to
(D)(9)(b).
E. State-Exempt
Accessory Dwelling
Units
New subsection created. As the state provisions for state-exempt ADUs (Gov. Code 66323) have become more complex, a
separate subsection is warranted.
This also more clearly
distinguishes these provisions
from those applicable to all ADUs
and non-state-exempt ADUs.
E. State-Exempt
Accessory Dwelling
Units – Lots with
Single-Family
Dwellings
Number of detached
ADUs on single-family
properties increased to
two.
Required by AB 956 (2026).
E. State-Exempt
Accessory Dwelling
Units – Lots with
Multifamily
Dwellings
Language added limiting
detached ADUs to 800
square feet.
Consistent with intent of state
ADU law (since this limitation is
provided for detached ADUs on
single-family properties).
E. State-Exempt
Accessory Dwelling
Units – Lots with
Multifamily
Dwellings
Maximum number of
detached ADUs
increased to eight (but
not exceeding the
number of existing units
on the lot).
Required by SB 1211 (2024).
F. Junior Accessory
Dwelling Units
Exception added
prohibiting JADUs on
single-family lots where
two detached ADUs have
been constructed or
proposed.
Allowed by AB 956 (2026).
F. Junior Accessory
Dwelling Units
Exception to owner
occupancy requirement
added for JADUs that
Required by AB 1154 (2025).
Attachment 4
ADU Ordinance
Subsection &
Title1
Proposed Change Reason for Change
have access to a
bathroom in the attached
single-family dwelling.
G. Appeals Appeal provisions
updated to allow appeals,
but only by the ADU
applicant or the subject
property’s owner, and to
specify that a final
determination on the
appeal shall be provided
within 60 business days
Required by SB 543 (2025).
Current provisions do not any
appeals. State ADU law only
requires appeals to be allowed for
ADU applicants.
Staff Report
Date: November 10, 2026
To: City Council
From: Mindy Gentry, Director of Community Development
Prepared by: Frank Abejo, Principal Planner
[email protected]
(925) 671-3128
Subject: Considering Kolaboration Concord LLC’s (dba as “CoCo Farms”) compliance with the Development Agreement for a cannabis microbusiness with storefront retail at 2366 Stanwell Circle, determine that CoCo Farms has not complied in good faith with the Development Agreement; and direct staff to return with an ordinance terminating the Development
Agreement and resolutions/other necessary documents
revoking the CoCo Farms cannabis license and any cannabis-related land use entitlements.
CEQA: Recommended action is exempt pursuant to Public
Resources Code Section 21065 and CEQA Guidelines Section 15270. Alternative action is exempt under Public Resources Code 21065, Business and Professions Code Section 26055(h) and/or CEQA Guidelines Sections 15301, 15302, 15303, 15304, and/or 15305.
Report in Brief
Staff has determined, based on substantial evidence, that CoCo Farms has not fully complied with the terms of the Development Agreement (“Agreement” or “DA”)) by falling short on the following: 1) financial contributions to the City, 2) interim housing for homeless through its CoCo Cares Program, and 3) provision of an employer-based health plan for the employees’ families for 2024-2025.
Based on this evidence, staff has scheduled this public hearing for a City Council compliance determination and appropriate further action.
6.a
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
Recommended Action
Consider staff’s compliance review and (1) determine that CoCo Farms has not complied in good faith with the Development Agreement; (2) direct staff to return with an ordinance terminating the Development Agreement and resolutions/other necessary documents revoking the CoCo Farms cannabis license and any cannabis-related land use entitlements;1 and (3) make the CEQA determinations as provided in this staff report.
Background
Cannabis Regulations and Competitive Selection Process
On May 26, 2020, the City Council adopted an Ordinance amending CMC Chapter 5.80 (Cannabis) and CMC Title 18 (Development Code) to allow adult-use City Cannabis Licenses for the following types of cannabis businesses:
• Manufacturers (limit of five);
• Testing laboratories (no limit);
• Retail storefront (limit of three)2;
• Non-storefront retail (limit of three)1;
• Type 11 distributors (limit of two);
• Microbusinesses (limit of six, two with a storefront retail component and two with a non-storefront retail component); and
• Type 133 distributors (only allowed with another license type).
On July 28, 2020, the City Council approved a merit-based competitive process to select cannabis storefront retailers, non-storefront retailers, and microbusinesses with storefront retail, and on October 5, 2020, the City issued a Request for Proposals (“RFP”) for these business types with a deadline to submit by November 19, 2020. 1 The formal DA termination process would include revocation of the Project Approvals (as defined in DA Section
3.A).
2 Can only be applied for after being selected through a competitive selection process. All other available licenses can be applied for and issued through a first-come, first-served process. 3 Type 13 means a cannabis business that only transports cannabis and cannabis products between licensees and is not permitted to transport any cannabis or cannabis products, except for immature cannabis plants and/or seeds, to a licensed retailer or to the retailer portion of a licensed microbusiness, as allowed with a state-issued Type 13 distribution license. This definition also includes distributors who are licensed by the state for self-distribution and are permitted to transport cannabis and cannabis products that the licensee has cultivated or manufactured. A distributor transport only self-distribution licensee is not permitted to transport cannabis and cannabis products cultivated or manufactured by other licensees.
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
History of CoCo Farms
On April 13, 2021, following interviews, public comment, and City Council deliberation, CoCo Farms was invited to apply for one of the two available microbusiness with storefront retail licenses. On June 11, 2021, CoCo Farms submitted for land use permits4 and a voluntary Development Agreement to codify community benefits, amongst other things, to establish a cannabis microbusiness with storefront retail at 2366 Stanwell Circle.
On April 12, 2022, the City Council adopted a Resolution approving the land use permits and introduced an Ordinance approving the Agreement. On May 26, 2022, an Ordinance went into effect adopting the Agreement between the City and CoCo Farms regarding the establishment of a cannabis microbusiness with storefront retail at 2366 Stanwell Circle. The Agreement memorialized the voluntary community benefits, which includes, but are not limited to developer contributions, volunteer time, and local hiring preferences.
The Agreement took effect on May 26, 2022, and has an initial five-year term (through May 26, 2027) but may be terminated earlier as discussed below.
In June 2022, CoCo Farms received a cannabis microbusiness with storefront retail license and in August 2022 opened for business.
Development Agreement Annual Review
Pursuant to state law, the Concord Municipal Code, and the Agreement, a staff-level annual review is required to determine that the developer has demonstrated good faith compliance with the terms of the development agreement. If there is evidence of noncompliance with the terms and conditions of the agreement, a public hearing shall be held by the City Council to determine on the basis of substantial evidence whether the developer has complied in good faith during the period under review.
Analysis
Staff has determined that CoCo Farms has not complied with the following Community Benefits required under the Agreement (see Exhibit B of Attachment 1).
Outstanding Development Agreement Obligations
Pursuant to Government Code Section 65865.1 and CMC Section 18.460.090, a public hearing is to be held if there is evidence of noncompliance, at which time the Developer, CoCo Farms, must demonstrate good-faith compliance with the terms and conditions of the Agreement. Therefore, at this hearing the City Council is being asked, based upon the evidence, whether CoCo Farms has complied in good faith with the terms of the 4 The land use permits consist of a Use Permit for excess parking, Variance for fence height, Administrative Permit to establish a cannabis microbusiness with storefront retail, and Design and Site Review for exterior building and site improvements.
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
Agreement. Based on the evidence, staff is recommending the City Council find CoCo Farms noncompliant with the Agreement.
Developer Contributions
Section I.B – Developer shall contribute to the City five percent (5%) of Developer’s Cannabis Business Gross Revenues, or $50,000 per month (i.e., $600,000 annually), whichever is greater.
Two external audits show that CoCo Farms has not been compliant with this requirement since CoCo Farms opened for business in August 2022. The audits reflect an underreporting of Gross Revenues, and thus a failure to remit the required Developer Contributions. The primary cause of the underreporting is attributed to wholesale transfers. CoCo Farms often transfers inventory between its multiple affiliated companies located outside of the City and has deducted these “intercompany” transfers from its reported Gross Revenues.
Section 6.B.3 of the Agreement defines “Gross Revenues” as follows:
“…the total amount (including all receipts, charges/surcharges/line items intended to represent all or any portion of the Developer Contributions passed through to consumers or other third parties, cash credits, services, and property of any kind or nature) received or payable for sales of goods, wares or merchandise, gains realized from trading stocks, bonds, interest discounts, rents royalties, fees, commissions, dividends, or other remunerations, however designated, or for the performance of any act or service of any nature for which a charge is made or credit allowed (whether such service, act or employment is done as part of or in connection with the sale of goods, wares, merchandise or not), without any deduction therefrom on account of the cost of the property sold, the cost of materials used, labor or service costs, interest paid or payable, losses or any other expense whatsoever. However, the following shall not be included as Gross Receipts:
i. cash discounts where allowed and taken on sales;
ii. any tax required by law to be included in or added to the purchase price and collected from the consumer or purchaser;
iii. such part of the sale price of any property returned by purchasers to the seller as refunded by the seller by way of cash or credit allowances or return of refundable deposits previously included in gross receipts; iv. receipts derived from the occasional sale of used, obsolete or surplus trade fixtures, machinery or other equipment used by the taxpayer in the regular course of the taxpayer’s business;
v. cash value of sales, trades or transactions between departments or units of the same business located in the City; and
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
vi. receipts of refundable deposits, except that such deposits when forfeited and taken into income of the business shall not be excluded when in excess of one dollar.”
The Agreement excludes certain activities/items from Gross Revenues, such as “cash value of sales, trades, or transactions between departments or units of the same business located in the City.” However, wholesale sales or intercompany transfers from CoCo Farms to affiliated businesses located outside the City are not excluded under the Agreement and therefore fall within the definition of Gross Revenues.
CoCo Farms has unilaterally taken the position that these transfers should not be subject to the Gross Revenues-based contribution, despite the absence of an express exclusion in the Agreement (Attachment 2). To address this issue, CoCo Farms has submitted an application to amend the Agreement to expressly exclude such intercompany transfers from the Gross Revenues calculation and align the Agreement with its current business practices.
Labor and Hiring Practices/Preferences
In addition to the above issue, CoCo Farms has not provided evidence of compliance on the following Community Benefits pursuant to Section 6 of the Agreement (“Community Benefits”):
• Section III.C – Developer shall ensure the eligibility of all Cannabis Business employees and their immediate family members to participate in an employer-based health plan with 90% of the premium paid by the Developer.
For the 2024–2025 reporting period, CoCo Farms provided documentation on the availability of employer-provided healthcare for employees but failed to provide evidence that the healthcare is available with 90% of the premium paid for immediate family members.
• Section III.E – Developer shall implement its “CoCo Cares” program … by, on an annual basis, hiring and providing interim housing for at least ten (10) individuals who are near homeless or are experiencing homelessness in Concord, with a living wage, training, and health care provided to such individuals.
Since CoCo Farms opened, they have successfully hired ten individuals per year who are near homeless or are experiencing homelessness in Concord, but have not provided any evidence of the provision of interim housing for these individuals.
Amendment Application
Should the Council find that CoCo Farms has complied in good faith with the Agreement, staff will return to the Council at a future hearing to consider CoCo Farms’ application to amend the Agreement to allow, among other things, eliminating the
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
minimum $50,000 monthly contribution, excluding intercompany transfers from Gross Revenues, and changes to the CoCo Cares Program regarding hiring preferences and volunteer work. CoCo Farms has also requested amending their land use approval to add retail delivery.
Alternatives
The City Council could continue the hearing and direct to allow CoCo Farms to address the non-compliance issues identified in this report by a date certain.
Financial Impact
Termination of the existing Agreement would require CoCo Farms to close its Concord location, resulting in reduced revenues to the City5. Although the City Council could direct staff to find a replacement cannabis business on the current eligibility list, that list is likely out of date given the amount of time since the competitive selection process was completed. If the eligibility list is exhausted, the City Council could also direct staff to reopen the competitive process for a microbusiness with storefront retail license; however, this is a time-intensive and costly process that would require other City Council priorities to be delayed due to limited Planning Division staff resources.
Additionally, it is possible that customers of CoCo Farms, may take their business elsewhere in the City, limiting the General Fund impact of this closure.
Environmental Determination
Pursuant to Public Resources Code 21065 and CEQA Guidelines Section 15270, CEQA does not apply to projects which a public agency rejects or disapproves. In the alternative, the project was previously determined to be categorically exempt pursuant to Public Resources Code 21065, CEQA Guidelines Sections 15301 (“Existing Facilities”), Section 15302 (“Replacement or Reconstruction”), 15303 (“New Construction or Conversion of Small Structures”), Section 15304 (“Minor Alterations to Land”), and/or Section 15305 (“Minor Alterations in Land Use Limitations”). These categorical exemptions applied because the project consisted of tenant improvements to an existing building, with de minimis façade and landscaping improvements. A Notice of Exemption was filed for the project with the Contra Costa County Clerk-Recorder on April 28, 2022.
Furthermore, pursuant to Section 15300.2(c), there are no exceptions to the categorical exemptions, because the project: 1) is not located in a sensitive environment; 2) will not cause a cumulative impact due to successive projects of the same type in the same area; 3) will not have a significant effect on the environment due to a cumulative impact of other projects or unusual circumstances; 4) will not result in damage to scenic resources; 5) is not located on a site which is included on any list compiled pursuant to 5 This loss of revenue could be offset by another operator either assuming the CoCo Farms obligations, or a business on the eligibility list establishing their own operations at the site, assuming the cannabis land use approvals are left in place.
City Council Agenda Report
Agenda Item No. 6.a
November 10, 2026
Section 65962.5 of the Government Code; and, 6) will not cause a substantial adverse change in the significance of a historical resource.
Additionally, Business and Professions Code Section 26055(h) provides that CEQA does not apply to the adoption of an ordinance, rule, or regulation that requires discretionary review and approval of permits, licenses, or other authorizations to engage in commercial cannabis activity, as long as each subsequent discretionary approval involves applicable CEQA review. Accordingly, no further environmental review is warranted. This reflects the City’s independent judgement an analysis.
Public Contact
The City Council Agenda was posted at City Hall and on the City’s website. CoCo Farms was notified of this hearing. Additionally, notification was mailed to all owners and occupants of property within five-hundred (500) feet of the subject parcel at least 10 days prior to the public hearing, and has been published in the East Bay Times, as required by state law and the Concord Municipal Code. This item has also been posted at City Hall and at the subject site at least 10 days prior to the public hearing.
Additionally, notice has been provided to all interested parties on the City Cannabis e-notification list.
Attachments
1. Development Agreement with Community Benefits (Exhibit B)
2. Applicant’s Community Benefits Recap
3. September 12, 2025, request from CoCo Farms to Amend Development Agreement and Land Use Approval
Attachment 1
CoCo Farms Concord
Community Benefits Recap
November 10, 2026
CoCo Farms Concord has done everything it committed to do in its April 2021 presentation to the Concord City Council.
● Gross Receipts Taxes…
○ 5% of Gross Receipts with Minimum of $50K per month + $25K City Fund ○ Since opening in July 2022 through May 2026…
■ $2,602,400 in Cannabis Fees
■ $1,242,000 in City Fund Contributions
■ Total Cash Benefit = $3,844,400
○ 2026 Projected $ 900,000
○ “For Certain” Monthly Payment is $75,000 minimum.
● Volunteer Hours…
○ 4 Hours per month per Owner + Employees
○ Hours Owed From Opening to October 2026 = 8,820
○ Hours Spent From Opening to October 2026 = 12,292
○ Annual Cost = $22 x 1.086 x 2,144 = $51,224
● CoCo Cares…
○ 10 units of 1 employee for 6 months
○ Have delivered on this Promise every year.
● Of the 31 employees, 13 are Concord Residents. And… they enjoy good wages, PTO and Health coverage mostly paid by the Company. See Exhibit B for details.
● Clean record of operations since opening in July 2022. Four years. The operation is not a burden to any City department.
Attachment 2
CoCo Farms Concord
Overview
November 10, 2026
Despite everything that has been delivered to the City, as promised in April of 2021, the City is now demanding an additional $1.5 Million from CoCo Farms.
● CoCo Farms does not have the $1.5 Million.
● Continuing to demand the $1.5 Million will result in… ○ The closure of CoCoFarms.
○ The loss of $75,000 per month in Fees and City Fund
contributions to the City.
○ The loss of 31 jobs.
● The Problems…
○ The Development Agreement (DA) contains Fees above what was promised in April of 2021.
○ The injudicious application of the Penalties provided in the DA. ○ Sales tax enforcement in the absence of context.
● The Solutions…
○ Amend the Development Agreement as detailed below.
○ Extend grace, where merited, in the application of Penalties. ○ Leave Sales tax enforcement to the CDTFA.
CoCo Farms Concord
The Contexts for These Requests
November 10, 2026
● Pertaining to the Use Permit and the Development Agreement… ○ Presented by the City a full year after the Company won the competition in April 2021.
○ By this time, the Company was under duress to agree to almost anything the City put in front of it.
○ The April 2021 presentation to the City Council indicated that the Company expected to Open for business in August 2021.
○ The Use Permit and DA delays and other City-driven delays in the permitting process, pushed the Opening date to July of 2022. This is almost two years after the competition was launched.
○ By the Opening date, the Company was almost $2 Million in debt and the Cannabis market had already dropped 30% from the 2020 high. ● In our Competitive Proposal delivered in October 2020, we did not commit to… ○ Paying fees and taxes on intercompany transfers. But we have paid $584,209 to-date.
○ Paying Audit Fees. But we will.
○ Paying penalties and interest on late payments.
■ During the period January to April of 2025, the company was unable to remit payments because ERC funds from the IRS were delayed. ■ The IRS repeatedly stated that “the check was in the mail”. But it turned out, it wasn’t.
■ Had we known in January that the check was not really in the mail, we could have borrowed funds. But the cost of hard-money capital to Cannabis companies is well above 75% APR.
■ Wanting to not have to pay 75% APR and relying on the IRS’s assurance that the check was in the mail, we simply waited for the check to arrive.
■ During this period, we assured the City that when the check arrived, we would pay in full. And when it arrived in May, we did. ■ All of the cities we work in were also not paid during this period, and all were paid in full in May once the check arrived.
CoCo Farms Concord
What We Are Requesting
November 10, 2026
● All Penalties and Interest assessed to-date be waived. Approximately $150,000. ● All findings of under-payments to-date be withdrawn. $1,378,182 See Exhibit A. ● The DA be modified as follows…
○ Exhibit B - Retail Delivery be added at the 5% tax rate (same as Storefront Retail). Rationale: Delivery companies from other municipalities are taking cannabis dollars from CoCo Farms and the City of Concord. ○ Exhibit B - The $50,000 minimum monthly tax be stricken. Rationale: The Revenue targets envisioned in October of 2020 are just not achievable in 2026. We are currently about $5,000 short of the Minimum every month.
The addition of Delivery will make up some of the $5,000 loss. ○ Section 6 (B.3.v) - All intercompany transfers and services be explicitly excluded from taxation. Rationale: This tax was not an April 2021 commitment; but the DA is being interpreted to include it. So, it needs to be explicitly excluded from taxation retroactive to July of 2022. ○ Exhibit B - The CoCo Cares Program for the homeless and near-homeless be removed and replaced with “some preference be given to hiring the homeless or near-homeless”. Rationale: This is just not affordable in 2026.
○ Exhibit B - The Volunteer Program be replaced with a $50,000 increase in the annual contribution to the Cannabis Community Benefit Fund.
Rationale: The Volunteer Program costs $50,000 per year to operate. The volunteers are almost entirely the participants in the CoCo Cares Program.
If CoCo Cares is removed, then we will not have the staff to support the Volunteer Program. Early in the program we learned that Budtenders are not willing to do this and “forcing” them results in the loss of good Budtenders. IMPORTANT: If Request #4 is denied, then Request #5 is withdrawn.
○ Section 6 (B.4) - Penalties be stricken from the DA.
○ Section 9 - The restrictions on transfers or assignment of the DA be modified to reasonably permit the sale of the business.
CoCo Farms Concord
Exhibit A
November 10, 2026
● HDL Audit of 2022/2023 $233,846.83 for under-reporting of inter-company sales.
● HDL Audit of 2023/2024/2025 $588,436.28 for under-reporting of intercompany sales.
● HDL Audit of Q3 2023 to Q1 2026 Sales Taxes $555,899.42 ○ Pertains to the 1% Bradley Burns and the 1% Measure V Sales Taxes ○ Not sure how this was calculated.
○ However, the company’s Sales & Excise Taxes are now before the Office of Tax Appeals for the State.
○ And the company’s parent company (Kolaboration Ventures Corporation) has filed a $508 Million Complaint against the State for Breach; which filing addresses these taxes.
● Estimate of cumulative Interest & Penalties… $150,000 ● Total Demand from the City of Concord $1,528,182
CoCo Farms Concord
Exhibit B
November 10, 2026
● Wage details…
○ Entry-level positions start at $17/hour.
○ Our highest paid employee earns the equivalent of $54/hour on a salary basis.
○ Hourly retail employees make $18 − $23/hour plus pooled tips, which average anywhere from $3 − $7 per hour in addition to the base rate. ○ 80% of all Kolaboration Concord employees earn at least $20/hour. ● Benefits Eligibility and Costs…
○ All full-time employees are eligible to participate in company benefits plans - medical, dental, and vision.
○ We consider employees to be full-time at 30 hours per week. ○ The company offers two different options for medical coverage - a Silver tier plan, and a Gold tier plan.
○ The company pays for 90% of the Silver plan premium.
○ The company pays for 81% of the Gold plan premium.
○ For managers and supervisors, the company pays for 100% of the premium.
○ Employees are free to choose which level of plan and coverage they would like.
○ Family coverage is also provided with the same company premium coverages as those for Employee-only coverage.
○ For all KVC companies combined, KVC paid 85% of the total cost of $1.3 Million.
● Paid Time Off and Sick Pay for Full-time Employees…
○ Employees are considered full-time at 30 hours per week. ○ Full-time employees receive either 13 or 15 days of PTO depending on their total compensation package.
○ All employees receive 5 days of CA Paid Sick Leave.
○ The net result is that all full-time employees receive 18-20 days total of paid time off options per accrual year.
Kolaboration Concord LLC
CoCo Farms Concord
Request for Amendments
to the
Conditional Use Permit and Development Agreement
September 12, 2025
Preamble
CoCo Concord submitted its application for the competitive selection process in October of 2020. By the time we opened, it was July of 2022 and the California Cannabis market had already crashed by 30%. The market today is half of what it was in 2020. The commitments made in 2020 are difficult to keep in 2025. So, some relief is needed.
This request is made within the following additional context… Of the five competition winners, only 2 have actually executed; and CoCo Farms has executed far and above Coastal (whose parent company is now in Receivership).
Through August 2025, CoCo Farms has produced $2.1 Million in Cannabis Fees for the City and approximately 7,000 Volunteer Hours. We now have 40 employees, 21 of whom are Concord residents and 10 of these were homeless. We have done everything we committed to do in the April 2021 presentation to the City Council.
Modifications Requested
1. We request that Retail Delivery be added to the Use Permit and the Development Agreement at the 5% tax rate (same as Storefront Retail). Rationale: Delivery companies from other municipalities are taking cannabis dollars from CoCo Farms and the City of Concord.
2. In the Development Agreement, we request that the $50,000 minimum monthly tax be stricken.
Rationale: The Revenue targets envisioned in October of 2020 are just not achievable in 2025. We are currently about $5,000 short of the Minimum every month. The addition of Delivery will make up some of the $5,000 loss.
3. In the Development Agreement, we request that all intercompany transfers and services be explicitly excluded from taxation. Rationale: This tax was not an April 2021 commitment; but the DA is being interpreted to include it. So, it needs to be explicitly excluded from taxation retroactive to July of 2022.
4. In the Development Agreement, we request that the CoCo Cares Program for the homeless and near-homeless be removed and replaced with “some preference be given to hiring the homeless or near-homeless”. Rationale: This is just not affordable in 2025.
5. In the Development Agreement, we request that the Volunteer Program be replaced with a $50,000 increase in the annual contribution to the Cannabis Community Benefit Fund. Rationale: The Volunteer Program costs $46,000 per year to operate. The volunteers are almost entirely the participants in the CoCo Cares Program. If CoCo Cares is removed, then we will not have the staff to support the Volunteer Program. Early in the program we learned that Budtenders are not willing to do this and “forcing” them results in the loss of good Budtenders. IMPORTANT: If Request #4 is denied, then Request #5 is withdrawn.
6. Waive the $72,000 +/- Penalties and Fees assessed in the first half of 2025. Rationale: There were extenuating circumstances for late payment. The Development Agreement provides for this relief.
Attachment 3