CUSTOM SIGNAGE PRESENTATION
19900 STEVENS CREEK BLVD., CUPERTINO, CA
Prepared for Shane Co.
proctor productions
02 proctor productions
Shane Co. Custom Building Signage Design | 2023 (CUPERTINO, CA - SITE LOCATION) (conceptual visual only)
Shane Co
19900 Stevens Creek Blvd, Cupertino, CA 95014
NORTH SIGN BUILDING LOCATION
EAST SIGN BUILDING LOCATION 1
EAST SIGN BUILDING LOCATION 2
03 proctor productions
Shane Co. Custom Building Signage Design | 2023 (CUPERTINO, CA - EXISTING & PROPOSED EXTERIOR ELEVATION) (conceptual visual only)
SCALE - NTS
280”
[7112 mm]
8.40”
[213.36 mm]
84.08”
[2135.63 mm]
56.34”
[1431.04 mm]
163.83”
[4161.28 mm]
Full Face & Side Lit letters
14.46”
[367.28 mm]
22.22”
[564.39 mm]
40.17”
[1020.32 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
117”
[2971.8 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
32.64 SQFT - TOTAL SIGN AREA
NOTE: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. A wall sign shall not be supported by anchorages secured to an unbraced parapet wall.
SIGN ILLUMINATION IS
CONTROLLED BY THE
PELICAN SYSTEM
Specifications
Package
1st Surface1
Painted
Polished Sand-blasted Brushed
Plated
Wire Whip5
Qty8
Mounting Back Top Bo□om Side etc4 Location Interior Exterior
from the Ground Level < 5’ ’8 - ‘5 ’41 - ‘8 14‘ < 7 LEDs3
Drain Hole n/a Yes - Refer to C16
Standard( ) Expedite( )Shipping Mode Dimensions Box Crate
- Size
- Weight
- # of Boxes
Included Moun□ng Pa□ern Moun□ng Accessories Dimmer ETL Label Power Supply Enclosure(Paige Box) RGB Package Return GlacierWhite™ Colored2
C1 Drain hole Location - Bottom View
BackerDrain
Hole
0.25”
(6mm)
* Drain hole may be visible from the bottom
B1.1 Typical Section Elevation
B2 Isometric Elevation
AA
6 5
1 2
3 4
Fastening Screws located
on the backs of letters for
serviceability
B1 Section Elevation
ZZ
ZZ
AA
A1 Sign Elevation
SCALE - NTS
< RS-AC-S1 Style >
- Reference -
1 set
Note
Note
Loca□on : TBD18AWG - 10’ long
Flush Wall Mount, M-6/3” Long moun□ng pins
Note
1.25” Deep
White, 6500k, Exterior
Note
1T Stainless Steel
(Black/Sa□n finish)
Op□ons
(Horizontal / Ver□cal)
Notes:
/uni2219 Mounting pattern and accessories supplied with letters To be fastened to building facade. Building construction type: wood frame with plywood sheathing and stucco /f_inish. (As per City Code: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. Signs shall not be supported by anchorages secured to an unbraced parapet wall.)
/uni2219 Class II 5A ASU-60-12U variable primary with 12VDC secondary power supplies /uni2219 Electrical connections by customer
/uni2219 Permitting if applicable by customer
/uni2219 Installation by customer
Full Face & Side Lit letters
25.92”
[658.39 mm]
39.84”
[1011.94 mm]
72”
[1828.8 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
227.54”
[5779.516 mm]
6.6”
[167.64 mm]
72”
[1828.8 mm]
48.5”
[1231.9 mm]
141.01”
[3581.65mm]
209.72”
[5326.89 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
Shane Co
19900 Stevens Creek Blvd, Cupertino, CA 95014
03 proctor productions
Shane Co. Custom Building Signage Design | 2023 (CUPERTINO, CA - EXISTING & PROPOSED EXTERIOR EAST ELEVATION 1) (conceptual visual only)
SCALE - NTS
280”
[7112 mm]
8.40”
[213.36 mm]
84.08”
[2135.63 mm]
56.34”
[1431.04 mm]
163.83”
[4161.28 mm]
Full Face & Side Lit letters
14.46”
[367.28 mm]
22.22”
[564.39 mm]
40.17”
[1020.32 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
117”
[2971.8 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
32.64 SQFT - TOTAL SIGN AREA
NOTE: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. A wall sign shall not be supported by anchorages secured to an unbraced parapet wall.
SIGN ILLUMINATION IS
CONTROLLED BY THE
PELICAN SYSTEM
Specifications
Package
1st Surface1
Painted
Polished Sand-blasted Brushed
Plated
Wire Whip5
Qty8
Mounting Back Top Bo□om Side etc4 Location Interior Exterior
from the Ground Level < 5’ ’8 - ‘5 ’41 - ‘8 14‘ < 7 LEDs3
Drain Hole n/a Yes - Refer to C16
Standard( ) Expedite( )Shipping Mode Dimensions Box Crate
- Size
- Weight
- # of Boxes
Included Moun□ng Pa□ern Moun□ng Accessories Dimmer ETL Label Power Supply Enclosure(Paige Box) RGB Package Return GlacierWhite™ Colored2
C1 Drain hole Location - Bottom View
BackerDrain
Hole
0.25”
(6mm)
* Drain hole may be visible from the bottom
B1.1 Typical Section Elevation
B2 Isometric Elevation
AA
6 5
1 2
3 4
Fastening Screws located
on the backs of letters for
serviceability
B1 Section Elevation
ZZ
ZZ
AA
A1 Sign Elevation
SCALE - NTS
< RS-AC-S1 Style >
- Reference -
1 set
Note
Note
Loca□on : TBD18AWG - 10’ long
Flush Wall Mount, M-6/3” Long moun□ng pins
Note
1.25” Deep
White, 6500k, Exterior
Note
1T Stainless Steel
(Black/Sa□n finish)
Op□ons
(Horizontal / Ver□cal)
Notes:
/uni2219 Mounting pattern and accessories supplied with letters To be fastened to building facade. Building construction type: wood frame with plywood sheathing and stucco /f_inish. (As per City Code: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. Signs shall not be supported by anchorages secured to an unbraced parapet wall.)
/uni2219 Class II 5A ASU-60-12U variable primary with 12VDC secondary power supplies /uni2219 Electrical connections by customer
/uni2219 Permitting if applicable by customer
/uni2219 Installation by customer
Full Face & Side Lit letters
25.92”
[658.39 mm]
39.84”
[1011.94 mm]
72”
[1828.8 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
227.54”
[5779.516 mm]
6.6”
[167.64 mm]
72”
[1828.8 mm]
48.5”
[1231.9 mm]
141.01”
[3581.65mm]
209.72”
[5326.89 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
Shane Co
19900 Stevens Creek Blvd, Cupertino, CA 95014
04 proctor productions
Shane Co. Custom Building Signage Design | 2023 (CUPERTINO, CA - EXISTING & PROPOSED EXTERIOR EAST ELEVATION 2) (conceptual visual only)
SCALE - NTS
280”
[7112 mm]
8.40”
[213.36 mm]
84.08”
[2135.63 mm]
56.34”
[1431.04 mm]
163.83”
[4161.28 mm]
Full Face & Side Lit letters
14.46”
[367.28 mm]
22.22”
[564.39 mm]
40.17”
[1020.32 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
117”
[2971.8 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
32.64 SQFT - TOTAL SIGN AREA
NOTE: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. A wall sign shall not be supported by anchorages secured to an unbraced parapet wall.
SIGN ILLUMINATION IS
CONTROLLED BY THE
PELICAN SYSTEM
Specifications
Package
1st Surface1
Painted
Polished Sand-blasted Brushed
Plated
Wire Whip5
Qty8
Mounting Back Top Bo□om Side etc4 Location Interior Exterior
from the Ground Level < 5’ ’8 - ‘5 ’41 - ‘8 14‘ < 7 LEDs3
Drain Hole n/a Yes - Refer to C16
Standard( ) Expedite( )Shipping Mode Dimensions Box Crate
- Size
- Weight
- # of Boxes
Included Moun□ng Pa□ern Moun□ng Accessories Dimmer ETL Label Power Supply Enclosure(Paige Box) RGB Package Return GlacierWhite™ Colored2
C1 Drain hole Location - Bottom View
BackerDrain
Hole
0.25”
(6mm)
* Drain hole may be visible from the bottom
B1.1 Typical Section Elevation
B2 Isometric Elevation
AA
6 5
1 2
3 4
Fastening Screws located
on the backs of letters for
serviceability
B1 Section Elevation
ZZ
ZZ
AA
A1 Sign Elevation
SCALE - NTS
< RS-AC-S1 Style >
- Reference -
1 set
Note
Note
Loca□on : TBD18AWG - 10’ long
Flush Wall Mount, M-6/3” Long moun□ng pins
Note
1.25” Deep
White, 6500k, Exterior
Note
1T Stainless Steel
(Black/Sa□n finish)
Op□ons
(Horizontal / Ver□cal)
Notes:
/uni2219 Mounting pattern and accessories supplied with letters To be fastened to building facade. Building construction type: wood frame with plywood sheathing and stucco /f_inish. (As per City Code: Wall signs attached to exterior walls of solid masonry, concrete or stone shall be safely and securely attached by means of metal anchors, bolts or expansion screws of not less than 3/8 inch (9.5 mm) diameter and shall be embedded not less than 5 inches (127 mm). Wood blocks shall not be used for anchorage, except in the case of wall signs attached to buildings with walls of wood. Signs shall not be supported by anchorages secured to an unbraced parapet wall.)
/uni2219 Class II 5A ASU-60-12U variable primary with 12VDC secondary power supplies /uni2219 Electrical connections by customer
/uni2219 Permitting if applicable by customer
/uni2219 Installation by customer
Full Face & Side Lit letters
25.92”
[658.39 mm]
39.84”
[1011.94 mm]
72”
[1828.8 mm]
Segmentations
Full Side Lit Letters Black / Satin Finish
227.54”
[5779.516 mm]
6.6”
[167.64 mm]
72”
[1828.8 mm]
48.5”
[1231.9 mm]
141.01”
[3581.65mm]
209.72”
[5326.89 mm]
Black / Satin Finish
Black / Satin Finish
Full Side Lit Letters
Full Side Lit Letters
Shane Co
19900 Stevens Creek Blvd, Cupertino, CA 95014