CH-2 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Model Number:
Frame Finish:
Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Regal Seating
95T
Black Legs and Brass Ferrules and Foot Rest
17" W x 17" D x 32" H x 18" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CH-3 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat:
Back: (UP-10)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Amisco
Luongo
30349/69BQ
Sun Gold
(UP-10)
21-1/2" W x 23-1/2" D x 33-5/8" x 18-3/4" Seat Height
450 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CH-4 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Finish:
Seat: (UP-5)
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Lavenue Swivel Lounge Chair Swivel Base
LA2832
Black Fringe
28" W x 31" D x 32" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CH-5 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat: (UP-4)
Back: (UP-4)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
MTS
Corinth
8000
Brass
28-1/2" W x 26-3/4" D x 32" H
(Verify Per Plans)
10-13 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CH-6 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat: (UP-6)
Back: (UP-6)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Onyx Lounge Chair
NX2323
Brass
23" W x 23" D x 29.5" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 96 of 152
REMOVED
CH-7 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat:
Back:
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Amethyst Swivel Lounge Chair Swivel base
AM3130
(UP-5)
(UP-13)
30.5" W x 30" D x 31.5" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CH-8 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat:
Back:
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Lily Jack
West Coast Desk Chair
WC2525
(UP-16)
(UP-15)
25.5" W x 25.25" D x 31" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 98 of 152
REMOVED
CH-9 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat Finish:
Seat: No.12 Seat
Back: No.8 Meteor
End Panel: No. 140 Fireside
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Irwin Seating
Empire Theater Chair
63.21.140.8
Carnegie Origin
21" W
(Verify Per Plans)
10-12 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
BS-1 BARSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Frame Finish:
Seat: (UP-9) with (UP-5) welt
Back: (UP-9)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Regal Seating
P4TFT-30 Bar Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 44" H x 21" D x 30" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
CS-1 COUNTERSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Frame Finish:
Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Regal Seating
P4TFT-30 Counter Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 21" D x 44" H x 26" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
TT-1 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-1)
24" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks
TT-2 TABLE TOP - 36" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-2)
36" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks
TT-3 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Finish:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
UB Klem
24" Ash Plank
Walnut
(TB-4)
24" Diameter Table Top
1-1/4" Thickness
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 104 of 152
REMOVED
TB-1 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Product:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. (Verify Per Plans)
8-10 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written (TT-1)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 42" Bar Height
TB-2 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Product:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
(TT-2)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 28.5" Bar Height
(Verify Per Plans)
8-10 Weeks
TB-4 TABLE BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Series:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Style Nations
Tivoli Black and Brass Collar Table Base
Brass and Black
(TT-3)
17" Dia. X 28.7" H
(Verify Per Plans)
12-16 Weeks
107 of 152
REMOVED
T-1 ACCENT TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a Four Hands
Cameron Accent
Aged Brass
Tall Table Dims: 8.75" x 8.75" x 20.25" Short Table Dims: 10.75" x 10.75" x 16.5" (Verify Per Plans)
4 Weeks
T-2 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Mandy Li Collection
Beryl Side Table
Satin Brushed Brass Top with Black Resin Base
24" D x 42" H - Special Order
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 109 of 152
REMOVED
T-3 COMMUNITY TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Michelle C - Table - ST - 023
Dark Ebony Wood Black Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-4 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
GIL Coffee Table - ST - 009
Dark Ebony Wood Birch Top with Satin Brass Base
30" D x 16" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-5 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Debby Side Table
Dark Ebony Wood Birch Top with Satin Brass Base
21-3/8" D x 24" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 112 of 152
REMOVED
T-6 LOUNGE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Audo
Androgyne Lounge Table
Dark stained oak and Kunis Breccia Sand
47.24" W x 17.72" L x 14.96" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 113 of 152
REMOVED
T-7 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Masera Coffee Table
Bluestone Slab and Black Oak Base
60" W x 30" D x 12" H
(Verify Per Plans)
4 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-8 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Hannah Side Tale - ST - 010
Dark Ebony Wood Birch Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-9 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Mandy Li Collection
Hannah Side Tale - ST - 010
Bluestone Top with Dark Ebony Wood Birch and Veneer Base 60" W x 40" D x 16" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-10 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Nuevo Living
Claudio Coffee Table
Black Wood Vein Marble
30" D x 18" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 117 of 152
REMOVED
T-11 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Nuevo Living
Pixie Coffee Table
Black Wood Vein Marble with Brushed Gold Legs
42.8" D x 15.8" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-12 COCKTAIL TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Lily Jack
Custom Designed Cocktail Table with Bolt Down Base
Black
12" D x 28" Dining Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
T-13 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Corbet Coffee Table
Black
35.25" D x 15.75" H
(Verify Per Plans)
4 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
BQ-1 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 11'-4" x 4'-0" x 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES is required for any item supplied by a vendor other than the specified source.
Table Logix
Custom "L-Shaped" Banquette Seat with Vertical Tuft Channels
BQ-2 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 22'-6" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
BQ-3 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 15'-0" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
BQ-4 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 34'-0" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
BN-1 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Four Hands
Lindy Bench
Rialto Ebony
63" W x 17.75" D x 19.25" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 125 of 152
REMOVED
BN-2 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Rogue Bench
Ebony
54" W x 24" D x 25" H
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 126 of 152
REMOVED
BN-3 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Four Hands
Fawkes Bench
Brushed Ebony
78.75" W x 28" D x 20" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
CR-1 CLOTHING RACK
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written William Roberts Vintage
Industrial Style Heavy Duty Pipe Rolling Clothing Rack
Black
47" W x 61.5" H x 17" D
(Verify Per Plans)
8-10 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
OT-1 OTTOMAN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written ISA
Lava Ottoman
(UP-8)
19" W x 18" H
(Verify Per Plans)
8 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 129 of 152
REMOVED
SB-1 SIDEBOARD
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Freda Sideboard
Brass
72" W x 18" D x 29" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 130 of 152
REMOVED
SB-2 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Mako Small Sideboard
Gray
76" W x 18" D x 34" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
SB-3 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Mako Large Sideboard
Gray
100" W x 18" D x 34" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
SB-4 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Hendrick Sideboard
Brass and Gunmetal
73" W x 18" D x 30" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
SO-1 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat: (UP-1)
Back: (UP-1)
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Custom Round Sette with Diamond Tufting
Brass
60" D
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 131 of 152
REMOVED
SO-2 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Seat:
Back:
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Custom kidney Shaped Sofa
(UP-6)
(UP-6)
82" W x 34" D
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
SO-3 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Seat:
Back:
Size:
Location:
Lead Time:
NOTES:
Charter
Sky Two Piece Sectional
(UP-7)
(UP-7)
90" W x 50" D x 30" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
SO-4 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-12)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
DN9237
LJ #31 Finish with LJ #1409 PVD Finish Metal Plates
(UP-12)
92" W x 37" D x 34" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
SO-5 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish: Maple/Beech Wood Base
Seat:
Back:
Size:
Location:
Note: 18" built in tray
Lead Time:
NOTES:
Lily Jack
Custom Designed Sofa with Built-In Tray
(UP-14)
(UP-14)
133.5" W x 80.75" D x 30" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
SO-6 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-3)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
BV10838
LJ #30 FINISH
(UP-3)
108" W x 38" D x 32" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
SO-7 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-2)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
PH9230
LJ 31A
(UP-2)
92" W x 30" D x 34.5" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
LAMP1 FLOOR LAMP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
8 Weeks
Regina Andrew Detroit
Trilogy Floor Lamp
Blackened Iron
19.5" W x 69.25" H
(Verify Per Plans)
138 of 152
REMOVED
LAMP2 DESK LAMP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Rejuvenation
Bruno Table Lamp
Aged Brass/Bronze
11-1/4" W
(Verify Per Plans)
4 Weeks
139 of 152
REMOVED
ATTACHMENT 5
Lighting Spec List Descriptions
STAGE RED - LIGHTING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106
ISSUE DATE: 6/26/2023
SPEC # DESCRIPTION VENDOR NOTES
LIGHTING
Type A Custom Pendant BDL Lighting
Type B Recessed Downlight
Solais
Lighting
Type C Custom Wall Sconce with Logo BDL Lighting
Type D LED Tape Light Luminii
Type F Step Light WAC Lighting
Type H Marquee Light Per G.C.
Type K Custom Wall Sconce BDL Lighting
Type L Recessed Linear Light A-Light
Type M Lit Mirror IB Mirror
Type N Custom Pendant BDL Lighting
Type P Flush Mount
Visual
Comfort
NOTES:
1 Actual dimensions vary depending on field conditions.
2. All quantities must be verified per final construction documents prior to ordering.
3. Any proposed alternatives to these specifications must be equal or better.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
A
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Dimensions:
Lamp:
Location:
Lead Time:
NOTES:
CUSTOM PENDANT
BDL Lighting
Custom Fixture : CHD-1; Metal, Plated Satin Brass with Frosted White Glass (Verify Per Drawings)
3'-0 W x 1'-5" H
120V
(Verify Per Drawings)
1. Bottom of Fixture is 6'-8" A.F.F.
2. To be on Dimmable Circuit
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
B RECESSED DOWNLIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Lamp:
Location:
NOTES:
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
2. To be on Dimmable Circuit
1. Black Cone. Black Flange
120V, 25.4W
(Verify Per Drawings)
Solais Lighting
YR4nc-D-Ym24-40c-27K-1700-BK/BK
(Verify Per Drawings)
YR4nc
4" W
C CUSTOM WALL SCONCE WITH LOGO
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
BDL Lighting
Custom Fixture : WSC-1; Semi Gloss Black Powdercoat and Plated Satin Brass (Verify Per Drawings)
Custom
10" W x 27" H
1. General Contractor to provide lamps per manufacturer specifications.
D LED TAPE LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Product:
Lamp:
Listing:
Location:
Lead Time:
NOTES:
Luminii
OAX 44 Linear LED Strip - 24 VDC
(Verify Per Drawings)
OAX 44-27K-1212CC-84-C-SA
24V, 2.2W/FT
(Verify Per Drawings)
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
F STEP LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
WAC Lighting
WL-LED210-AM-BK
(Verify Per Drawings)
WL-LED210
3-1/8" W x 5" H x 1-7/8" D
1. General Contractor to provide lamps per manufacturer specifications.
H BOWERY OUTDOOR CEILING LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
Quorum
Bowery outdoor Ceiling Light Fixture
(Verify Per Drawings)
QUO663204
4.5"W x 8.25"H
1. General Contractor to provide lamps per manufacturer specifications.
K CUSTOM WALL SCONCE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
BDL Lighting
Custom Wall Sconce
(Verify Per Drawings)
Custom
6" W x 16" H
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
L RECESSED WALL SCONCE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
A-Light
Recessed Wall Sconce
(Verify Per Drawings)
D5
Refer to Elevations
M LIT MIRROR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
IB Mirror
Paris Mirror - Acrylic
(Verify Per Drawings)
ACRYX24363000 / 5999
24" x 36"
N CUSTOM PENDANT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Dimensions:
Lamp:
Location:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
BDL Lighting
Custom Fixture : CHD-1; Metal, Plated Satin Brass and Frosted White Glass (Verify Per Drawings)
15" W x 24" H
120V
(Verify Per Drawings)
P FLUSH MOUNT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Finish: Gild
Dimensions:
Wattage:
Location:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
Visual Comfort
Strada Small Flush Mount
(Verify Per Drawings)
18.75" W x 8' H
6-40 C11
(Verify Per Drawings)