Fontana City Council
April 9, 2024

STAGE RED INTERIOR REMODEL
8463 Sierra Avenue Fontana, CA 92335
DE-24-25-SB
SUBMISSION DEADLINE:

APRIL 1, 2024

BID MUST BE SUBMITTED ELECTRONICALLY
Hard Copies will NOT be accepted as a viable bid.

TABLE OF CONTENTS
DE-24-25-SB

ITEM PAGE
i
NOTICE INVITING SEALED BIDS 1
INSTRUCTIONS TO BIDDERS 2
➢ Availability of Contract Documents
➢ Examination of Contract Documents
➢ Interpretation of Contract Documents
➢ Pre-Bid Inspection of Site; Pre-Bid Conference and Site Walk ➢ Addenda
➢ Completion of Bid Forms
➢ Modification of Bids
➢ Designation of Subcontractors (Entered Online)
➢ Licensing Requirements
➢ Signing of Bids
➢ Submission of Sealed Bids (Electronic Bid Only)
➢ Delivery and Opening of Bids
➢ Withdrawal of Bid
➢ Basis of Award; Balanced Bids
➢ Disqualification of Bidders; Interest In More Than One Bid ➢ Insurance Requirements
➢ Award Process
➢ Filing of Bid Protests
➢ Workers Compensation
➢ Substitution of Security
➢ Prevailing Wages
➢ Debarment of Contractors and Subcontractors
➢ Performance Bond and Payment (Labor and Materials) Bond Requirements
➢ Sales and Other Applicable Taxes, Permits, Licenses and Fees ➢ Iran Contracting Act of 2010
➢ Execution of Contract
BID FORMS 9
➢ Information Required of Bidders (Submit Online)
➢ Bid Form (Submit Online)
➢ Contractor’s Certificate Regarding Workers’ Compensation (Submit Online)
➢ Non-Collusion Declaration (Submit Online)
➢ Payment Bond (Labor and Materials), If Bid Amount is Over $25,000

TABLE OF CONTENTS
DE-24-25-SB

ITEM PAGE
ii
CONTRACT 16
➢ Article 1. Scope of Work
➢ Article 2. Time for Completion
➢ Article 3. Contract Price
➢ Article 4. Payments
➢ Article 5. Payments Withheld and Backcharges
➢ Article 6. Changes and Extra Work
➢ Article 7. Liquidated Damages
➢ Article 8. Component Parts of The Contract
➢ Article 9. Provisions Required By Law
➢ Article 10. Indemnification
➢ Article 11. Prevailing Wages
➢ EXHIBIT “A” – Change Order Form
GENERAL CONDITIONS 29
Article 1.- Definitions
Article 2. - Contract Documents
Article 3. - Detail Drawings And Instructions
Article 4. – Substitutions
Article 5. – Materials
Article 6. - Contractor’s Supervision
Article 7. – Workers
Article 8. – Subcontractors
Article 9. - Permits And Licenses
Article 10. - Diversion of Recyclable Waste Materials
Article 11. - Removal of Hazardous Materials
Article 12. - Sanitary Facilities
Article 13. - Air Pollution Control
Article 14. - Fire Protection
Article 15. - Cleaning Up
Article 16. - Excessive Noise
Article 17. - Protection Of Work And Property
Article 18. - Contractors Means And Methods
Article 19. - Authorized Representatives
Article 20. - Hours of Work
Article 21. - Prevailing Rates of Wages
Article 22. - Non-discrimination/Equal Employment Opportunity Article 23. - Labor/Employment Safety
Article 24. - Workers’ Compensation Insurance

TABLE OF CONTENTS
DE-24-25-SB
PAGE
iii
ITEM
Article 25. - Employer’s Liability Insurance
Article 26. - Commercial General Liability Insurance
Article 27. - Automobile Liability Insurance
Article 28. - Form And Proof of Carriage Of Insurance
Article 29. - Time For Completion And Liquidated Damages Article 30. - Cost Breakdown And Periodic Estimates
Article 31. - City’s Right To Terminate Contract
Article 32. - Warranty And Guarantee
Article 33. - Notice And Service Thereof
Article 34. – Integration

ATTACHMENTS

1. Finishes List

2. Furniture & Lighting List

3. Finishes Spec. List Descriptions

4. Furniture Spec. List Descriptions

5. Lighting Spec. List Descriptions

OTHER DOCUMENTS

STAGE RED CONSTRUCTION PLANS (BID PLAN SET)

STAGE RED CONSTRUCTION CALC SET (BID PLAN SET)
STAGE RED NARRATIVE OF CHANGES TO PLANS (Delta 1 to Delta 3)

SUPPLEMENT INSTRUCTIONS - SECURITY CAMERAS

STAGE RED RENDERINGS

IRAN CONTRACTING CERTIFICATION

FLEET COMPLIANCE CERTIFICATION

BID FORM

CITY OF FONTANA

NOTICE INVITING SEALED BIDS
NOTICE IS HEREBY GIVEN that sealed bids will be received only by submitting electronically atww.fontanapurchasing.org, for STAGE RED Interior Remodel DE-24-25-SB no later than April 1, 2024, at which time or thereafter said Bids will be electronically opened and available online. Bids received after this time will not be able to submit electronically. Bids shall be valid for 90 calendar days after the Bid opening date.

DESCRIPTION OF WORK:

The work is described as follows: Demolition, construction of new Balconies, new bars, new raised platform, and new walls, ceilings, installation of new lighting, flooring, foodservice equipment, Audio/Visual equipment, and finishes, including all new Structural, Mechanical, Plumbing & Electrical scope. All improvements noted, as identified on the Construction Plans, prepared by Ideation Group, Inc (“Construction Plans”). Contractor shall be responsible for demolition, construction, and installation of all improvements specifically identified on or implied by Construction Plans, unless specifically noted on the Construction Plans to be performed by others. The City is contracting a company/consultant to provide the furnishings, furniture and lighting required for Stage RED. Please review plans to identify what is the contractor’s responsibility. Refer to attachments for information on the furnishings, fixtures and finishes that will be provided by others.

Bid must be submitted electronically for the exact item(s) requested in the bid specifications. Copies of plans, specifications, and contract documents are available from the City’s Purchasing website www.fontanapurchasing.org.

An OPTIONAL Pre-Bid jobsite walk will be held at 8463 Sierra Avenue, Fontana, CA on March 21, 2024 PROMPTLY at 7:00 AM. The bidder MUST confirm with the City that they will attend the jobsite walk. If no bidders confirm attendance, jobsite walk will not be held, and the venue will not be opened for viewing. The selected Contractor shall attend a pre-construction meeting at 7:30am on April 3rd and be prepared to commence work immediately after receiving the NTP from City.

Each Bid shall be accompanied by cash, a certified or cashier’s check, or Bid Bond secured from a surety company satisfactory to the City, the amount of which shall not be less than ten percent (10%) of the submitted Total Bid Price, made payable to City of Fontana as bid security.

Each Bid submitted electronically shall be accompanied by the bid forms, non-collusion declaration, and all additional documentation required by the Instructions to Bidders. The successful Bidder will be required to furnish the City with a Payment (Labor and Materials) Bond equal to 100% of the successful Bid, prior to execution of the Contract. The bond we need to be secured from a surety that meets all of the State of California bonding requirements, as defined in Code of Civil Procedure Section 995.120, and is admitted by the State of California. The cost of said bonds shall be included in the Bid amount. Pursuant to Public Contract Code Section 22300, the successful Bidder may substitute certain securities for funds withheld by City to ensure his performance under the Contract.

Each Bidder shall be a licensed contractor pursuant to the Business and Professions Code and shall be licensed in the following appropriate classification(s) of contractor’s license(s), for the work Bid upon, and must maintain the license(s) throughout the duration of the Contract. At the time of submitting a bid, the prime contractor and subcontractor shall possess a Class "B" contractor’s license or a Class “C” specialty license sufficient to perform the work.

Pursuant to Public Contract Code Section 3400(b), if the City should make findings designating certain materials, products, things, or services by specific brand or trade name, such findings and the materials, products, things, or services and their specific brand or 1 trade names will be set forth in the Special Conditions.
2 The City shall award the Contract for the Project to the lowest responsive, responsible Bidder on the basis of the base Bid alone by the City. The City reserves the right to reject any or all Bids or to waive any irregularities or informalities in any Bids or in the Bidding process.

The California Air Resources Board (“CARB”) implemented amendments to the In-Use Off-Road DieselFueled Fleets Regulations (“Regulation”) which are effective on January 1, 2024 and apply broadly to all self-propelled off road diesel vehicles 25 horsepower or greater and other forms of equipment used in California. A copy of the Regulation is available at https://ww2.arb.ca.gov/sites/default/files/barcu/ regact/2022/off-roaddiesel/appa-1.pdf. Bidders are required to comply with all CARB and Regulation requirements, including, without limitation, all applicable sections of the Regulation, as codified in Title 13 of the California Code of Regulations section 2449 et seq. throughout the term of the Project. Bidders must provide, with their Bid, copies of Bidder’s and all listed subcontractors the most recent, valid Certificate of Reported Compliance (“CRC”) issued by CARB. Failure to provide valid CRCs as required herein may render the Bid non-responsive.

INSTRUCTIONS TO BIDDERS
3 INSTRUCTIONS TO BIDDERS

1. AVAILABILITY OF CONTRACT DOCUMENTS
Bids must be submitted to the City on the Bid Forms which are a part of the Bid Package for the Project. Contract Documents may be obtained from the Purchasing website www.fontanapurchasing.org.

2. EXAMINATION OF CONTRACT DOCUMENTS
Bidders shall be solely responsible for examining the Project Site and the Contract Documents, including any Addenda issued during the Bidding period, and for informing itself with respect to local labor availability, laws and codes, local permit requirements, wage scales, local tax structure, contractors’ licensing requirements, availability of required insurance, and other factors that could affect the Work. Bidders are responsible for consulting the standards referenced in the Contract. Failure of Bidder to so examine and inform itself shall be at its sole risk, and no relief for error or omission will be given except as required under State law.

3. INTERPRETATION OF CONTRACT DOCUMENTS
Discrepancies in, and/or omissions from the Plans, Specifications or other Contract Documents or questions as to their meaning shall be immediately brought to the attention of the City by submission of a written request for an interpretation or correction by using the online bid system at www.fontanapurchasing.org, NO LATER THAN 7 Days prior to the bid closing date.

Any interpretation of the Contract Documents will be made only by Addenda duly issued electronically to each person registered on the prospective bidder’s list. The City will not be responsible for any explanations or interpretations provided in any other manner. No person is authorized to make any oral interpretation of any provision in the Contract Documents to any Bidder, and no Bidder should rely on any such oral interpretation.

Bids shall include complete compensation for all items that are noted in the Contract Documents and are the responsibility of the Contractor.

4. PRE-BID INSPECTION OF SITE; PRE-BID CONFERENCE AND SITE WALK Each prospective Bidder is responsible for fully acquainting itself with the conditions of the Project Site (which may include more than one site), as well as those relating to the construction and labor of the Project, to fully understand the facilities, difficulties and restrictions which may impact the cost or effort required to complete the Project. To this end, a Pre-Bid Conference and Site Walk will be held on the date(s) and time(s) indicated in the Notice Inviting Bids.

5. ADDENDA
The City reserves the right to revise the Contract Documents prior to the Bid opening date.

Revisions, if any, shall be made by Addenda. All Addenda issued by the City shall be included in the Bid and made part of the Contract Documents. Pursuant to Public Contract Code Section 4104.5, if the City issues an Addendum which includes material changes to the Project less than 72 hours prior to the deadline for submission of Bids, the City will extend the deadline for submission of Bids. The City may determine, in its sole discretion, whether an Addendum warrants postponement of the Bid submission date. Each prospective Bidder shall provide City a name and email address to which Addenda may be sent, as well as a telephone number by which

INSTRUCTIONS TO BIDDERS
4 the City can contact the Bidder. Copies of Addenda will be available on the City’s Purchasing website www.fontanapurchasing.org. Please Note: Bidders are responsible for ensuring that they have received any and all Addenda. To this end, each Bidder should contact the City’s Purchasing website www.fontanapurchasing.org to verify that he has received all Addenda issued, if any, prior to the Bid opening.

6. COMPLETION OF BID FORMS
Bids shall only be prepared using copies of the Bid Forms which are included in the Contract Documents. The use of substitute Bid forms other than clear and correct photocopies of those provided by the City will not be permitted. Bids shall be executed by an authorized signatory as described in these Instructions to Bidders. In addition, Bidders shall fill in all blank spaces (including inserting “N/A” where applicable) and initial all interlineations, alterations, or erasures to the Bid Forms. Bidders shall neither delete, modify, nor supplement the printed matter on the Bid Forms nor make substitutions thereon. USE OF BLACK OR BLUE INK, INDELIBLE PENCIL, ELECTRONICALLY OR TYPED IS REQUIRED. Deviations in the Bid form may result in the Bid being deemed non-responsive.

7. MODIFICATIONS OF BIDS
Each Bidder shall submit its Bid in strict conformity with the requirements of the Contract Documents. Unauthorized additions, modifications, revisions, conditions, limitations, exclusions or provisions attached to a Bid may render it non-responsive and may cause its rejection.

Bidders shall neither delete, modify, nor supplement the printed matter on the Bid Forms, nor make substitutions thereon. Oral, telephonic and electronic modifications will not be considered, unless the Notice Inviting Bids authorizes the submission of electronic Bids and modifications thereto and such modifications are made in accordance with the Notice Inviting Bids.

8. DESIGNATION OF SUBCONTRACTORS (Entered Online)
In compliance with the Subletting and Subcontracting Fair Practices Act of the Public Contract Code of the State of California, each Bidder shall set forth below: (a) the name and the location of the place of business and (b) the portion of the work which will be done by each subcontractor who will perform work or labor or render service to the Contractor in or about the construction of the work in an amount in excess of one-half of one percent (1/2%) of the Contractor’s Total Bid Amount. Notwithstanding the foregoing, if the work involves streets and highways, then the Contractor shall list each subcontractor who will perform work or labor or render service to Contractor in or about the work in an amount in excess of one-half of one percent (1/2%) of the Contractor’s Total Bid Amount or $10,000, whichever is greater. No additional time shall be granted to provide the below requested information.

If no subcontractor is specified, for a portion of the work, or if more than one subcontractor is specified for the same portion of Work, to be performed under the Contract in excess of one-half of one percent (1/2%) of the Contractor’s Total Bid Amount or $10,000, whichever is greater if the work involves streets or highways, then the Contractor shall be deemed to have agreed that it is fully qualified to perform that Work, and that it shall perform that portion itself.

9. LICENSING REQUIREMENTS
Pursuant to Section 7028.15 of the Business and Professions Code and Section 3300 of the Public Contract Code, all Bidders must possess proper licenses for performance of this Contract.

Subcontractors must possess the appropriate licenses for each specialty subcontracted. Pursuant to Section 7028.5 of the Business and Professions Code, the City shall consider any Bid

INSTRUCTIONS TO BIDDERS
5 submitted by a contractor not currently licensed in accordance with state law and pursuant to the requirements found in the Contract Documents to be nonresponsive, and the City shall reject the Bid. The City shall have the right to request, and Bidders shall provide within five (5) calendar days, evidence satisfactory to the City of all valid license(s) currently held by that Bidder and each of the Bidder’s subcontractors, before awarding the Contract. Please also note that, pursuant to Public Contract Code Section 20676, sellers of "mined material" must be on an approved list of sellers published pursuant to Public Resources Code Section 2717(b) in order to supply mined material for this Contract.

10. SIGNING OF BIDS
All Bids submitted shall be executed by the Bidder or its authorized representative. Bidders may be asked to provide evidence in the form of an authenticated resolution of its Board of Directors or a Power of Attorney evidencing the capacity of the person signing the Bid to bind the Bidder to each Bid and to any Contract arising therefrom.

If a Bidder is a joint venture or partnership, it may be asked to submit an authenticated Power of Attorney executed by each joint venturer or partner appointing and designating one of the joint venturers or partners as a management sponsor to execute the Bid on behalf of Bidder. Only that joint venturer or partner shall execute the Bid. The Power of Attorney shall also: (1) authorize that particular joint venturer or partner to act for and bind Bidder in all matters relating to the Bid; and (2) provide that each venturer or partner shall be jointly and severally liable for any and all of the duties and obligations of Bidder assumed under the Bid and under any Contract arising therefrom. The Bid shall be executed by the designated joint venturer or partner on behalf of the joint venture or partnership in its legal name.

11. SUBMISSION OF SEALED BIDS
Once the Bid and supporting documents have been completed and signed as set forth herein, they shall be submitted electronically.

Only where expressly permitted in the Notice Inviting Bids, may Bidders submit their Bids via electronic transmission pursuant to Public Contract Code Sections 1600 and 1601. The acceptable method(s) of electronic transmission shall be stated in the Notice Inviting Bids.

12. DELIVERY AND OPENING OF BIDS
Bids are to be submitted electronically. Electronic Bid System will close exactly at the time set forth in the Notice Inviting Bid. All applicable forms required to be completed per the bid documents, shall be submitted electronically prior to the due date and time. Hard copies will not be accepted as a viable bid. It is the Bidder’s sole responsibility to ensure that its Bid is received as specified. Bids may be submitted earlier than the dates(s) and time(s) indicated.

Bids will be available at the date and time stated in the Notice Inviting Bids and the amount of each Bid will be available online and recorded. The City may in its sole discretion, elect to postpone the opening of the submitted Bids. City reserves the right to reject any or all Bids and to waive any informality or irregularity in any Bid. In the event of a discrepancy between the written amount of the Bid Amount and the numerical amount of the Bid Amount, the written amount shall govern.

INSTRUCTIONS TO BIDDERS
6 13. WITHDRAWAL OF BID
Prior to Bid opening, a Bid may be withdrawn by the Bidder only by using the City’s electronic bidding system.

14. BASIS OF AWARD; BALANCED BIDS
The City shall award the Contract to the lowest responsive, responsible Bidder submitting a responsive Bid. The City may reject any Bid which, in its opinion when compared to other Bids received or to the City’s internal estimates, does not accurately reflects the cost to perform the Work. The City may reject as non-responsive any Bid which unevenly weights or allocates costs, including but not limited to overhead and profit to one or more particular Bid items.

15. DISQUALIFICATION OF BIDDERS; INTEREST IN MORE THAN ONE BID No Bidder shall be allowed to make, submit or be interested in more than one Bid. However, a person, firm, corporation or other entity that has submitted a subproposal to a Bidder, or that has quoted prices of materials to a Bidder, is not thereby disqualified from submitting a subproposal or quoting prices to other Bidders submitting a Bid to the City. No person, firm, corporation, or other entity may submit subproposal to a Bidder, or quote prices of materials to a Bidder, when also submitting a prime Bid on the same Project.

16. INSURANCE REQUIREMENTS
The successful Bidder shall procure the insurance in the form and in the amount specified in the Contract Documents.

17. AWARD PROCESS
Once all Bids are electronically opened and reviewed to determine the lowest responsive and responsible Bidder, the City will award the contract. The apparent successful Bidder should begin to prepare the following documents: (1) the Payment (Labor and Materials) Bond; and (2) the required insurance certificates and endorsements. Once the City notifies the Bidder of the award, the Bidder will have ten (10) consecutive calendar days from the date of this notification letter to execute the Contract and supply the City with all of the required documents and certifications. Regardless whether the Bidder supplies the required documents and certifications in a timely manner, the Contract time will begin to run ten (10) calendar days from the date of the notification. Once the City receives all of the properly drafted and executed documents and certifications from the Bidder, the City shall issue a Notice to Proceed to that Bidder.

18. FILING OF BID PROTESTS
Bidders may file a “protest” of a Bid with the City’s Purchasing Officer. In order for a Bidder’s protest to be considered valid, the protest must:

A. Be filed in writing within five (5) calendar days after the Bid opening date; B. Clearly identify the specific irregularity or accusation; C. Clearly identify the specific City staff determination or recommendation being protested;

INSTRUCTIONS TO BIDDERS
7 D. Specify, in detail, the grounds of the protest and the facts supporting the protest; and
E. Include all relevant, supporting documentation with the protest at time of filing.

If the protest does not comply with each of these requirements, it will be rejected as invalid.

If the protest is valid, the City’s Purchasing Officer, or other designated City staff member, shall review the basis of the protest and all relevant information. The Purchasing Officer will provide a written decision to the protestor. The protestor may then appeal the decision of the City Manager.

19. WORKERS COMPENSATION
Each Bidder shall submit the Contractor’s Certificate Regarding Workers’ Compensation form.

20. SUBSTITUTION OF SECURITY
The Contract Documents call for monthly progress payments based upon the percentage of the work completed. The City will retain five percent (5%) of each progress payment as provided by the Contract Documents. At the request and expense of the successful Bidder, the City will substitute securities for the amount so retained in accordance with Public Contract Code Section 22300.

21. PREVAILING WAGES
This is project is a public work in the State of California, funded in whole or in part with public funds. Therefore, the higher of the two applicable prevailing wage rates, federal or state, will be enforced. The Contractor’s duty to pay State prevailing wages can be found under Labor Code Section 1770 et seq. Labor Code Sections 1775 and 1777.7 outline the penalties for failure to pay prevailing wages and to employ apprentices, including forfeitures and debarment. The State Wage Decision is also available online at http://www.dir.ca.gov/dlsr/.

Apprenticeship Program: Attention is directed to Sections 1777.5, 1777.6 and 1777.7 of the California Labor Code and Title 8, California Administrative code, Section 200 et seq. to ensure compliance and complete understanding of the law regarding apprentices.

22. DEBARMENT OF CONTRACTORS AND SUBCONTRACTORS
In accordance with the provisions of the Labor Code, contractors or subcontractors may not perform work on a public works project with a subcontractor who is ineligible to perform work on a public project pursuant to Section 1777.1 or Section 1777.7 of the Labor Code and the Federal “Excluded Parties List System”. Any contract on a public works project entered into between a contractor and a debarred subcontractor is void as a matter of law. A debarred subcontractor may not receive any public money for performing work as a subcontractor on a public works contract. Any public money that is paid to a debarred subcontractor by the Contractor for the Project shall be returned to the City. The Contractor shall be responsible for the payment of wages to workers of a debarred subcontractor who has been allowed to work on the Project.
8 23. PERFORMANCE BOND AND PAYMENT (LABOR AND MATERIALS) BOND

REQUIREMENTS
Within the time specified in the Contract Documents, the Bidder to whom a Contract is awarded shall deliver to the City four identical counterparts of the Performance Bond and Payment (Labor and Materials) Bond, each in an amount equal to one hundred percent (100%) of the Total Bid Amount and in the form supplied by the City and included in the Contract Documents. Failure to do so may, in the sole discretion of City, result in the forfeiture of the Bid Guarantee. The surety supplying the bond must be an admitted surety insurer, as defined in Code of Civil Procedure Section 995.120, authorized to do business as such in the State of California and satisfactory to the City.

24. SALES AND OTHER APPLICABLE TAXES, PERMITS, LICENSES AND FEES Contractor and its subcontractors performing work under this Contract will be required to pay California sales tax and other applicable taxes, and to pay for permits, licenses and fees required by the agencies with authority in the jurisdiction in which the work will be located, unless otherwise expressly provided by the Contract Documents.

25. IRAN CONTRACTING ACT OF 2010
In accordance with Public Contract Code Section 2200 et seq., the City requires that any person that submits a bid or proposal or otherwise proposes to enter into or renew a contract with the City with respect to goods or services of one million dollars ($1,000,000) or more, certify at the time the bid is submitted or the contract is renewed, that the person is not identified on a list created pursuant to subdivision (b) of Public Contract Code Section 2203 as a person engaging in investment activities in Iran described in subdivision (a) of Public Contract Code Section 2202.5, or as a person described in subdivision (b) of Public Contract Code Section 2202.5, as applicable.

26. COMPLIANCE WITH CARB REGULATIONS
The City is a Public Works Awarding Body, as defined under Title 13 California Code of Regulations section 2449(c)(46). Accordingly, Bidders must submit, with their Bids, a valid Certificate of Reported Compliance (“CRC”) for the Bidder’s and its listed subcontractors fleet (including any applicable leased equipment or vehicles). Bidder must complete and submit the Fleet Compliance Certification, on the form included in the bid package. Failure to provide a valid CRC for the Bidder’s fleet, and for the fleets of all listed subcontractors, or failure to complete the Fleet Compliance Certification, may render the Bid non-responsive.

27. EXECUTION OF CONTRACT
As required herein the Bidder to whom an award is made shall execute the Contract in the amount determined by the Contract Documents. The City may require appropriate evidence that the persons executing the Contract are duly empowered to do so.

END OF INSTRUCTIONS TO BIDDERS

SUBMIT ONLINE

INFORMATION REQUIRED OF BIDDER
9 INFORMATION REQUIRED OF BIDDER
A. INFORMATION ABOUT BIDDER
BIDDER certifies that the following information is true and correct:

Bidder's Name:

Business Address:

Telephone: Fax:

Email Address:

State Contractor's License No. and Class:

Original Date Issued: Expiration Date:

DIR No.: Expiration Date:

What type of work does the Bidder normally perform with its own forces? __________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ Name of Bonding Company and Name and Address of Agent:
_________________________________________________________ _________________________________________________________

SUBMIT ONLINE

BID FORM
10 BID FORM
TOTAL BID AMOUNT (BASED ON PLANS): The costs for any Work shown or required in the Contract Documents, but not specifically identified as a line item are to be included in the related line items and no additional compensation shall be due to Contractor for the performance of the Work.

NO. ITEM DESCRIPTION

UNIT OF
MEASURE QTY.

1. The contractor shall
construct the proposed
project in accordance with
the plans and specifications.

LS 1
$
Total Bid Amount in Numbers
Total Bid Amount in Written Form
Number of Days to Complete the Project (70 Working Days) The undersigned agrees that this Bid Form constitutes a firm offer to the City which cannot be withdrawn for the number of calendar days indicated in the Notice Inviting Bids from and after the Bid opening, or until a Contract for the Work is fully executed by the City and a third party, whichever is earlier.

1. Upload the Bid Form.

2. Upload the Information Required of Bidder Form.

3. Upload the fully executed Non-Collusion Declaration Form.

4. Upload the completed Contractor’s Certificate Regarding Workers’ Compensation Form.

5. List Subcontractors online.

I hereby certify under penalty of perjury under the laws of the State of California, which all of the information submitted in connection with this Bid and all of the representations made herein are true and correct.

SUBMIT ONLINE
CONTRACTOR’S CERTIFICATE REGARDING
WORKERS’ COMPENSATION
11 SDPUB\SAKINS\347250.2
CONTRACTOR’S CERTIFICATE REGARDING
WORKERS’ COMPENSATION
I am aware of the provisions of Section 3700 of the Labor Code which require every employer to be insured against liability for workers’ compensation or to undertake self-insurance in accordance with the provisions of that code, and I will comply with such provisions before commencing the performance of the work of this Contract.

Name of Bidder
Signature
Name and Title
Dated

SUBMIT ONLINE

NON-COLLUSION DECLARATION
12 NON-COLLUSION DECLARATION
The undersigned declares:

I am the ______________________________ of _________________________ ___________________________________________, the party making the foregoing bid.

The bid is not made in the interest of, or on behalf of, any undisclosed person, partnership, company, association, organization, or corporation. The bid is genuine and not collusive or sham. The bidder has not directly or indirectly induced or solicited any other bidder to put in a false or sham bid. The bidder has not directly or indirectly colluded, conspired, connived, or agreed with any bidder or anyone else to put in a sham bid, or to refrain from bidding. The bidder has not in any manner, directly or indirectly, sought by agreement, communication, or conference with anyone to fix the bid price of the bidder or any other bidder, or to fix any overhead, profit, or cost element of the bid price, or of that of any other bidder. All statements contained in the bid are true. The bidder has not, directly or indirectly, submitted his or her bid price or any breakdown thereof, or the contents thereof, or divulged information or data relative thereto, to any corporation, partnership, company, association, organization, bid depository, or to any member or agent thereof, to effectuate a collusive or sham bid, and has not paid, and will not pay, any person or entity for such purpose.

Any person executing this declaration on behalf of a bidder that is a corporation, partnership, joint venture, limited liability company, limited liability partnership, or any other entity, hereby represents that he or she has full power to execute, and does execute, this declaration on behalf of the bidder.

I declare under penalty of perjury under the laws of the State of California that the foregoing is true and correct and that this declaration is executed on ______________________[date], at ___________________________________[city], _____[state].
__________________________________
(Signature)
__________________________________
(Print Name)
__________________________________
(Title)

PAYMENT BOND (LABOR AND MATERIALS)
13 SDPUB\SAKINS\347250.2

PAYMENT BOND (LABOR AND MATERIALS)
KNOW ALL MEN BY THESE PRESENTS That
WHEREAS, the City of Fontana (hereinafter designated as the “City”), by action taken or a resolution passed ___________ , 20____ has awarded to ________________ hereinafter designated as the “Principal,” a contract for the work described as follows:
____________________________________________________________________________ (the “Project”); and
WHEREAS, said Principal is required to furnish a bond in connection with said contract; providing that if said Principal or any of its Subcontractors shall fail to pay for any materials, provisions, provender, equipment, or other supplies used in, upon, for or about the performance of the work contracted to be done, or for any work or labor done thereon of any kind, or for amounts due under the Unemployment Insurance Code or for any amounts required to be deducted, withheld, and paid over to the Employment Development Department from the wages of employees of said Principal and its Subcontractors with respect to such work or labor the Surety on this bond will pay for the same to the extent hereinafter set forth.

NOW THEREFORE, we, the Principal and __________________________ as Surety, are held and firmly bound unto the City in the penal sum of ______________ Dollars ($___________) lawful money of the United States of America, for the payment of which sum well and truly to be made, we bind ourselves, our heirs, executors, administrators, successors and assigns, jointly and severally, firmly by these presents.

THE CONDITION OF THIS OBLIGATION IS SUCH that if said Principal, his or its subcontractors, heirs, executors, administrators, successors or assigns, shall fail to pay any of the persons named in Section 3181 of the Civil Code, fail to pay for any materials, provisions or other supplies, used in, upon, for or about the performance of the work contracted to be done, or for any work or labor thereon of any kind, or amounts due under the Unemployment Insurance Code with respect to work or labor performed under the contract, or for any amounts required to be deducted, withheld, and paid over to the Employment Development Department or Franchise Tax Board from the wages of employees of the contractor and his subcontractors pursuant to Section 18663 of the Revenue and Taxation Code, with respect to such work and labor the Surety or Sureties will pay for the same, in an amount not exceeding the sum herein above specified, and also, in case suit is brought upon this bond, all litigation expenses incurred by the City in such suit, including reasonable attorneys’ fees, court costs, expert witness fees and investigation expenses.

This bond shall inure to the benefit of any of the persons named in Section 3181 of the Civil Code so as to give a right of action to such persons or their assigns in any suit brought upon this bond.

It is further stipulated and agreed that the Surety on this bond shall not be exonerated or released from the obligation of this bond by any change, extension of time for performance, addition, alteration or modification in, to, or of any contract, plans, specifications, or agreement pertaining or relating to any scheme or work of improvement herein above described, or pertaining or relating to the furnishing of labor, materials, or equipment therefore, nor by any change or modification of any terms of payment or extension of the time for any payment pertaining or relating to any scheme or work of improvement herein above described, nor by any rescission or attempted rescission or attempted rescission of the contract, agreement or bond, nor by any

PAYMENT BOND (LABOR AND MATERIALS)
14 SDPUB\SAKINS\347250.2
conditions precedent or subsequent in the bond attempting to limit the right of recovery of claimants otherwise entitled to recover under any such contract or agreement or under the bond, nor by any fraud practiced by any person other than the claimant seeking to recover on the bond and that this bond be construed most strongly against the Surety and in favor of all persons for whose benefit such bond is given, and under no circumstances shall Surety be released from liability to those for whose benefit such bond has been given, by reason of any breach of contract between the owner or City and original contractor or on the part of any obligee named in such bond, but the sole conditions of recovery shall be that claimant is a person described in Section 3110 or 3112 of the Civil Code, and has not been paid the full amount of his claim and that Surety does hereby waive notice of any such change, extension of time, addition, alteration or modification herein mentioned.

IN WITNESS WHEREOF, two (2) identical counterparts of this instrument, each of which shall for all purposes be deemed unoriginal thereof, have been duly executed by the Principal and Surety above named, on the _____ day of ______________________ 20______ the name and corporate seal of each corporate party being hereto affixed and these presents duly signed b its undersigned representative pursuant to authority of its governing body. (Corporate Seal of Principal,
if corporation)
Principal (Property Name of Contractor)
By:
(Signature of Contractor)
(Seal of Surety)
Surety
By:

Attorney in Fact
(Attached Attorney-In-Fact
Certificate and Required
Acknowledgements)
*Note: Appropriate Notarial Acknowledgments of Execution by Contractor and +surety and a power of Attorney MUST BE ATTACHED.

PAYMENT BOND (LABOR AND MATERIALS)
15 SDPUB\SAKINS\347250.2

CALIFORNIA ALL-PURPOSE ACKNOWLEDGMENT
State of California }
} ss.

County of __________________________ }
On before me,
personally appeared
Here Insert Name and Title of the Officer
Name(s) of Signer(s)
who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(ies), and that by his/her/their signature(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument.

I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct.

WITNESS my hand and official seal.

Place Notary Seal Above Signature of Notary Public
_______________________________________________________ OPTIONAL _____________________________________________________________ Though the information below is not required by law, it may prove valuable to persons relying on the document and could prevent fraudulent removal and reattachment of this form to another document.

Description of Attached Document
Title of Type of Document:

Document Date: Number of Pages:

Signer(s) Other Than Named Above:

Capacity(ies) Claimed by Signer(s)
Signer’s Name: Signer’s Name:
 Individual  Individual
 Corporate Officer Title(s):  Corporate Officer Title(s):
 Partner -  Limited  General  Partner -  Limited  General  Attorney in Fact Right Thumbprint of Signer
Top of thumb here
 Attorney in Fact Right Thumbprint of Signer
 Trustee  Trustee Top of thumb here
 Guardian or Conservator  Guardian or Conservator
 Other:  Other:

Signer is Representing: Signer is Representing:
.

CONTRACT
16 SDPUB\SAKINS\347250.2

CONTRACT
ARTICLE 1. SCOPE OF WORK. The Contractor shall perform all Work within the time stipulated the Contract and shall provide all labor, materials, equipment, tools, utility services, and transportation to complete all of the Work required in strict compliance with the Contract Documents as specified in Article 5 below for the following Project:

STAGE RED INTERIOR REMODEL, DE-24-25-SB
The Contractor and its surety shall be liable to the City for any damages arising as a result of the Contractor’s failure to comply with this obligation.

ARTICLE 2. TIME FOR COMPLETION.

2.1 The Work shall be commenced on the date stated in the City’s Notice to Proceed.

The Contractor shall complete all Work required by the Contract Documents within seventy (70) working days from the commencement date stated in the Notice to Proceed. By its signature hereunder, Contractor agrees the time for completion set forth above is adequate and reasonable to complete the Work.

Contract shall use the City’s general Project performance schedule shown below as a reference point when developing their project schedule:
• Bid opening date of
• Notice to Proceed (NTP) issued by
o Contract will go to City Council for award in
• Construction begins on or before
• Construction completion on or before

2.2 Contractor shall coordinate the Work with the other work being performed on the Project, in accordance with those schedules as may be issued from time to time during the performance of the Work, and any other scheduling requirements listed in this Agreement, so as not to delay, impede, obstruct, hinder or interfere with the commencement, progress or completion of the whole or any part of the Work or other work on the Project.

2.3 The Contractor shall participate and cooperate with the City in the development of schedules and other efforts to achieve timely completion of the Work providing

CONTRACT
17 SDPUB\SAKINS\347250.2
information for the scheduling of the times and sequence of operations required for its Work (“Contractor Schedule”) to meet City’s overall master project schedule requirements (“Master Schedule”). The Contractor shall continuously monitor the Master Schedule so as to be fully familiar with the timing, phasing and sequence of operations of the Work and of other work on the Project, and shall execute the Work in accordance with the requirements of the Master Schedule including any revisions thereto. The Contractor shall notify the City within 48 hours of any slippage in the Contractor Schedule and shall submit a detailed recovery plan to the City for approval within five (5) calendar days of such notice.

2.4 Should the progress of the Work or of the Project be delayed disrupted, hindered, obstructed, or interfered with by any fault or neglect or act or failure to act of the Contractor or any of its officers, agents, servants, employees, subcontractors or suppliers so as to cause any additional cost, expense, liability or damage to the City or any consultants retained by the City for the Project, including legal fees and disbursements incurred by the City or the consultants retained by the City for the Project, (whether incurred in defending claims arising from such delay or in seeking reimbursement and indemnity from the Contractor and its surety hereunder or otherwise) or any damages or additional costs or expenses for which the City or the consultants retained by the City for the Project, may or shall become liable, the Contractor and its surety shall and does hereby agree to compensate the City or the consultants retained by the City for the Project,, for and indemnify them against all such costs, expenses, damages and liability.

2.5 The City, in its sole discretion, may direct the Contractor to work overtime and, if so directed, the Contractor shall work said overtime and, provided that the Contractor is not in default under any of the terms or provisions of this Agreement or of any of the other Contract Documents, the City will pay the Contractor for such actual additional wages paid, if any, at the prevailing wage rates plus taxes imposed by law on such additional wages, plus workers' compensation insurance, liability insurance and levies on such additional wages if required to be paid by the Contractor.

2.6 If, however, the progress of the Work or of the Project is delayed by any fault or neglect or act or failure to act of the Contractor or any of its officers, agents, servants, employees, subcontractors or suppliers, then the Contractor shall, in addition to all of the other obligations imposed by this Agreement upon the Contractor in such case, and at its own cost and expense, work such overtime as may be necessary to make up for all time lost in the completion of the Work and of the Project due to such delay. Should the Contractor fail to make up for the time lost by reason of such delay, the City shall have the right to cause other contractors to work overtime and to take whatever other action it deems necessary to avoid delay in the completion of the Work and of the Project, and the cost and expense of such overtime and/or such other action shall be borne solely by the Contractor.

CONTRACT
18 SDPUB\SAKINS\347250.2
ARTICLE 3. CONTRACT PRICE. The City shall pay to the Contractor as full compensation for the performance of the Contract, subject to any additions or deductions as provided in the Contract Documents, and including all applicable taxes and costs, the sum of ____________________________________________________________ Dollars ($_________________________________). Payment shall be made as set forth in the General Conditions.

CONTRACT
19 SDPUB\SAKINS\347250.2
ARTICLE 4. PAYMENTS

4.1 The City shall make progress payments following receipt of undisputed and properly submitted payment requests. Contractor shall be paid a sum equal to ninety-five percent (95%) of the value of Work performed up to the last day of the previous month, less the aggregate of previous payments.

4.2 The Contractor shall, after the full completion of The Work, submit a final payment application. All prior progress estimates shall be subject to correction in the final estimate and payment.

4.3 Unless otherwise required by law, the final payment of ten percent (10%) of the value of the Work, if unencumbered, shall be paid no later than sixty (60) Days after the date of recordation of the Notice of Completion.

4.4 Acceptance by Contractor of the final payment shall constitute a waiver of all claims against the City arising from this Contract.

4.5 Payments to the Contractor shall not be construed to be an acceptance of any defective work or improper materials, or to relieve the Contractor of its obligations under the Contract Documents.

4.6 The Contractor shall submit with each payment request the Contractor’s conditional waiver of lien for the entire amount covered by such payment request, as well as a valid unconditional waiver of lien from the Contractor and all subcontractors and materialmen for all work and materials included in any prior invoices. Waivers of lien shall be in the forms prescribed by California Civil Code Section 3262. Prior to final payment by the City, the Contractor shall submit a final waiver of lien for the Contractor’s work, together with releases of lien from any subcontractor or materialmen.

ARTICLE 5. PAYMENTS WITHHELD AND BACKCHARGES In addition to amounts which the City may retain under other provisions of the Contract Documents the City may withhold payments due to Contractor as may be necessary to cover:
a. Stop Notice Claims.
b. Defective work not remedied.
c. Failure of Contractor to make proper payments to its subcontractors or suppliers. d. Completion of the Contract if there exists a reasonable doubt that the work can be completed for balance then unpaid.
e. Damage to another contractor or third party.
f. Amounts which may be due the City for claims against Contractor.

CONTRACT
20 SDPUB\SAKINS\347250.2
g. Failure of Contractor to keep the record (“as-built”) drawings up to date. h. Failure to provide updates on the construction schedule. i. Site clean up.
j. Failure of the Contractor to comply with requirements of the Contract Documents. k. Liquated damages.
l. Legally permitted penalties.

Upon completion of the Contract, the City will reduce the final Contract amount to reflect costs charged to the Contractor, backcharges or payments withheld pursuant to the Contract Documents.

ARTICLE 6. CHANGES AND EXTRA WORK

6.1 The City, without invalidating the Contract, may order changes in the Work consisting of additions, deletions or other revisions, the Contract amount and Contract time being adjusted accordingly. All such changes in the Work shall be authorized by Change Order, in the form attached hereto and incorporated herein as Exhibit “A,” and shall be performed under the applicable conditions of the Contract Documents. A Change Order signed by the Contractor indicates the Contractor's agreement therewith, including any adjustment in the Contract amount or the Contract time, and the full and final settlement of all costs (direct, indirect and overhead) related to the Work authorized by the Change Order.

6.2 All claims for additional compensation to the Contractor shall be presented in writing before the expense is incurred and will be adjusted as provided herein. No work shall be allowed to lag pending such adjustment, but shall be promptly executed as directed, even if a dispute arises. No claim will be considered after the work in question has been done unless a written contract change order has been issued or a timely written notice of claim has been made by Contractor.

Contractor shall not be entitled to claim or bring suit for damages, whether for loss of profits or otherwise, on account of any decrease or omission of any item or portion of Work to be done. Whenever any change is made as provided for herein, such change shall be considered and treated as though originally included in the Contract, and shall be subject to all terms, conditions and provisions of the original Contract.

6.3 Owner Initiated Change. The Contractor must submit a complete cost proposal, including any change in the Contract time, within seven (7) Days after receipt of a scope of a proposed change order, unless the City requests that proposals be submitted in less than seven (7) Days.

CONTRACT
21 SDPUB\SAKINS\347250.2

6.4 Contractor Initiated Change. The Contractor must give written notice of a proposed change order required for compliance with the Contract Documents within seven (7) Days of discovery of the facts giving rise to the proposed change order.

6.5 Whenever possible, any changes to the Contract amount shall be in a lump sum mutually agreed to by the Contractor and the City.

6.6 Price quotations from the Contractor shall be accompanied by sufficiently detailed supporting documentation to permit verification by the City.

6.7 If the Contractor fails to submit the cost proposal within the seven (7) Day period (or as requested), the City has the right to order the Contractor in writing to commence the work immediately on a force account basis and/or issue a lump sum change to the contract price in accordance with the City’s estimate of cost. If the change is issued based on the City estimate, the Contractor will waive its right to dispute the action unless within fifteen (15) Days following completion of the added/deleted work, the Contractor presents written proof that the City’s estimate was in error.

6.8 Estimates for lump sum quotations and accounting for cost-plus-percentage work shall be limited to direct expenditures necessitated specifically by the subject extra work, and shall be segregated as follows:
(a) Labor. The costs of labor will be the actual cost for wages prevailing locally for each craft or type of worker at the time the extra work is done, plus employer payments of payroll taxes and insurance, health and welfare, pension, vacation, apprenticeship funds, and other direct costs resulting from Federal, State or local laws, as well as assessment or benefits required by lawful collective bargaining agreements. The use of a labor classification which would increase the extra work cost will not be permitted unless the contractor establishes the necessity for such additional costs. Labor costs for equipment operators and helpers shall be reported only when such costs are not included in the invoice for equipment rental. (b) Materials. The cost of materials reported shall be at invoice or lowest current price at which such materials are locally available in the quantities involved, plus sales tax, freight and delivery. Materials cost shall be based upon supplier or manufacturer’s invoice. If invoices or other satisfactory evidence of cost are not furnished within fifteen (15) Days of delivery, then the City shall determine the materials cost, at its sole discretion.
(c) Tool and Equipment Use. No payment will be made for the use of small tools, tools which have a replacement value of $1,000 or less. Regardless of ownership, the rates to be used in determining equipment use costs shall not exceed listed rates prevailing locally at equipment rental agencies, or distributors, at the time the work is performed.

CONTRACT
22 SDPUB\SAKINS\347250.2
(d) Overhead, Profit and Other Charges. The mark-up for overhead (including supervision) and profit on work added to the Contract shall be according to the following:
i. “Net Cost” is defined as consisting of costs of labor, materials and tools and equipment only excluding overhead and profit. The costs of applicable insurance and bond premium will be reimbursed to the Contractor and subcontractors at cost only, without mark-up.
ii. For Work performed by the Contractor’s forces the added cost for overhead and profit shall not exceed fifteen (15%) percent of the Net Cost of the Work. iii. For Work performed by a subcontractor, the added cost for overhead and profit shall not exceed fifteen (15%) percent of the Net Cost of the Work to which the Contractor may add five (5%) percent of the subcontractor’s Net Cost. iv. For Work performed by a sub-subcontractor the added cost for overhead and profit shall not exceed fifteen (15 %) percent of the Net Cost for Work to which the subcontractor and general contractor may each add an additional five (5 %) percent of the Net Cost of the lower tier subcontractor.
v. No additional mark up will be allowed for lower tier subcontractors, and in no case shall the added cost for overhead and profit payable by City exceed twenty-five (25%) percent of the Net Cost as defined herein.

6.9 For added or deducted Work by subcontractors, the Contractor shall furnish to the City the subcontractor’s signed detailed estimate of the cost of labor, material and equipment, including the subcontractor markup for overhead and profit. The same requirement shall apply to sub-subcontractors.

6.10 For added or deducted work furnished by a vendor or supplier, the Contractor shall furnish to the City a detailed estimate or quotation of the cost to the Contractor, signed by such vendor or supplier.

6.11 Any change in The Work involving both additions and deletions shall indicate a net total cost, including subcontracts and materials. Allowance for overhead and profit, as specified herein, shall be applied if the net total cost is an extra; overhead and profit allowances shall not be applied if the net total cost is a credit. The estimated cost of deductions shall be based on labor and material prices on the date the Contract was executed.

6.12 Contractor shall not reserve a right to assert impact costs, extended job site costs, extended overhead, constructive acceleration and/or actual acceleration beyond what is stated in the change order for work. No claims shall be allowed for impact, extended overhead costs, constructive acceleration and/or actual acceleration due to a multiplicity

CONTRACT
23 SDPUB\SAKINS\347250.2
of changes and/or clarifications. The Contractor may not change or modify the City’s change order form in an attempt to reserve additional rights.

6.13 If the City disagrees with the proposal submitted by Contractor, it will notify the Contractor and the City will provide its opinion of the appropriate price and/or time extension. If the Contractor agrees with the City, a change order will be issued by the City. If no agreement can be reached, the City shall have the right to issue a unilateral change order setting forth its determination of the reasonable additions or savings in costs and time attributable to the extra or deleted work. Such determination shall become final and binding if the Contractor fails to submit a claim in writing to the City within fifteen (15) Days of the issuance of the unilateral change order, disputing the terms of the unilateral change order.

6.14 No dispute, disagreement or failure of the parties to reach agreement on the terms of the change order shall relieve the Contractor from the obligation to proceed with performance of the work, including extra work, promptly and expeditiously.

6.15 Any alterations, extensions of time, extra work or any other changes may be made without securing consent of the Contractor’s surety or sureties.

ARTICLE 7. LIQUIDATED DAMAGES. In accordance with Government Code section 53069.85, it is agreed that the Contractor will pay the City the sum of $1,500.00 for each and every calendar day of delay beyond the time prescribed in the Contract Documents for finishing the Work, as Liquidated Damages and not as a penalty or forfeiture. In the event this is not paid, the Contractor agrees the City may deduct that amount from any money due or that may become due the Contractor under the Contract. This Article does not exclude recovery of other damages specified in the Contract Documents.

ARTICLE 8. COMPONENT PARTS OF THE CONTRACT. The “Contract Documents” include the following:

Notice Inviting Bids
Instructions to Bidders
Contractor's Bid Forms
Contractor’s Certificate Regarding Workers’ Compensation Designation of Subcontractors
Information Required of Bidders
Non-Collusion Declaration form
Contract
Payment (Labor and Materials) Bond
General Conditions
California Building Codes as defined in the General Conditions Addenda
Approved and fully executed change orders
Any other documents contained in or incorporated into the Contract

CONTRACT
24 SDPUB\SAKINS\347250.2
The Contactor shall complete the Work in strict accordance with all of the Contract Documents.

All of the Contract Documents are intended to be complementary. Work required by one of the Contract Documents and not by others shall be done as if required by all. This Contract shall supersede any prior agreement of the parties.

ARTICLE 9. PROVISIONS REQUIRED BY LAW. Each and every provision of law required to be included in these Contract Documents shall be deemed to be included in these Contract Documents. The Contractor shall comply with all requirements of applicable federal, state and local laws, rules and regulations, including, but not limited to, the provisions of the California Labor Code and California Public Contract Code which are applicable to this Project.

ARTICLE 10. INDEMNIFICATION.

10.1 To the fullest extent permitted by law, the Contractor shall defend, indemnify and hold harmless the City and their respective officials, officers, agents, employees, and representatives (“indemnitees”) from any and all claims, demands, causes of action, costs, expenses, liabilities, losses, damages (including without limitation the payment of all consequential damages and attorneys fees and other related costs and expenses) or injuries, in law or equity, regardless of whether the allegations are false, fraudulent, or groundless, to tangible property or persons (including wrongful death) arising out of or resulting from the performance of the Work or this Agreement (including claims made by subcontractors for nonpayment), to the extent that the acts, omissions or willful misconduct are attributable to the Contractor or anyone employed directly or indirectly by any of them. Contractor shall defend, at Contractor’s own cost, expense and risk, with legal counsel of indemnitee’s choosing, any and all such aforesaid suits, actions or other legal proceedings of every kind that may be brought or instituted against the City and their respective officials, officers, agents, employees and representatives. To the extent of its liability, Contractor shall pay and satisfy any judgment, award or decree that may be rendered against the City and their respective officials, officers, agents, employees, and representatives, in any such suit, action or other legal proceeding. Contractor shall reimburse the City and their respective officials, officers, agents, employees, and representatives for any and all legal expenses and costs incurred by each of them in connection therewith or in enforcing the indemnity herein provided. The only limitations on this provision shall be those imposed by Civil Code Section 2782.

10.2 Nothing contained in the preceding section shall be deemed to obligate the Contractor to indemnify the City or any of the other indemnitees, against liability for damages or any other loss, damage or expense sustained, suffered or incurred on account of death or bodily injury to active persons or injury to property caused by the sole negligence or willful misconduct of the City or any of the other indemnitees set forth above. Therefore, if it is determined by legal proceedings or agreement, that the Contractor has no direct contributory or incidental negligence

CONTRACT
25 SDPUB\SAKINS\347250.2
or other obligation to the City or the other indemnitees, and the Contractor is in no way a proper party to a particular claim, then the Contractor shall not be obligated to hold the City or any indemnitees harmless with respect to said claim. However, until such determination is made by legal proceedings or agreement, or if the Contractor is found to have any degree of direct or contributory negligence or if it is determined that the Contractor is in any way or to any degree a proper party to said claim, then the Contractor’s obligations under all of the terms and provisions of the preceding section shall remain in full force and effect.

10.3 Nothing in this provision, or elsewhere in the Contract Documents, shall be deemed to relieve the Contractor of its duty to defend the City or any indemnitee, as specified under this Article, pending a determination of the respective liabilities of the City or any indemnitee, by legal proceeding or agreement.

10.4 In furtherance to, but not in limitation of the indemnity provisions in this Agreement, Contractor hereby expressly and specifically agrees that its obligation to indemnify, defend and hold harmless as provided in this Agreement shall not in any way be affected or diminished by any statutory or constitutional immunity it enjoys from suits by its own employees or from limitations of liability or recovery under workers’ compensation laws.

ARTICLE 11. PREVAILING WAGES. Contractor shall be required to pay the prevailing rate of wages in accordance with the Labor Code which such rates shall be made available online at http//www.dir.ca.gov/dlsr and which must be posted at the job site.

CONTRACT
26 SDPUB\SAKINS\347250.2
IN WITNESS WHEREOF, this Contract has been duly executed by the abovenamed parties, on the day and year above written.

CITY OF FONTANA
By:

City Manager
[INSERT CONTRACTOR'S NAME]
By:
[INSERT NAME]
[INSERT TITLE]
Attest:

By:

City Clerk
Attest: 1
By:
[INSERT NAME]
[INSERT TITLE]
Approved as to form:

Best Best & Krieger LLP
City Attorney
By: _____________________________
Department Head

IN COMPLIANCE WITH CONTRACT INSURANCE REQUIREMENTS
By: _____________________________
Director of Human Resources/
Risk Management

IN COMPLIANCE WITH PURCHASING AND CONTRACT ADMINISTRATION POLICIES/PROCEDURES Chief Financial Officer Purchasing Office
1 Attestation of Contractor’s signature must be obtained when required by the by-laws, articles of incorporation or other laws, rules or regulations applicable to Contractor’s business entity.

EXHIBIT “A” - CHANGE ORDER FORM
27 SDPUB\SAKINS\347254.2
EXHIBIT “A” CHANGE ORDER FORM

TRACKING INFORMATION
Bid/Contract Number: Change Order Number:

Project Description:

Contractor: PO Number:

For Housing Authority Only
Property Address:

Owner Name:

CONTRACT INFORMATION
Original Contract Amount Original Completion Time
$
Cumulative Contract Amount Cumulative Completion Time
$
Current Change Amount (+/-): Current Days (+/-)
$
New Contract Amount New Completion Time
$
Total % Over Contract:

INITIATING PARTY (Party responsible for initiating the change order request) City Initiated Contractor Initiated
Change in Scope Unforeseen Conditions Balancing
EXHIBIT “A” - CHANGE ORDER FORM
28 SDPUB\SAKINS\347250.2

CONTRACT CHANGE ORDER FORM

REASON(S) FOR THE CHANGE ORDER
ADJUSTMENT JUSTIFICATION: Attach complete itemized cost breakdown of all labor and material showing actual quantities, hours, unit prices, wage rates, required for the change, and the effect upon the time for performance of the work of such change order. Contractor’s form may be attached) Detailed Justification (Required):

Execution of this change order by the Contractor constitutes a binding accord and satisfaction that fully satisfies, waives, and releases the Owner from all claims, demands, costs, and liabilities, in Contract, law or equity, arising out of or related to the subject of the change order, whether known or unknown, including but not limited to direct and indirect costs and/or damages for delay, disruption, acceleration, loss of productivity, and stacking of trades, as well as any and all consequential damages.

Contractor: ___________________________________ Date: ____________ CITY OF FONTANA:

Project Manager: ______________________________ Date: ____________ Engineering Manager: __________________________ Date: ____________ Department Head: _____________________________ Date: ____________ (Required $25,000 and less)
Deputy City Manager: __________________________ Date: ____________ (Required $50,000 and less)
City Manager: ________________________________ Date: ____________ (Required Over $50,000)
Review of Analysis:

Purchasing Office: ____________________________ Date: ____________ Finance Department: ___________________________ Date: ____________

ATTACHMENTS

1. Finishes List

2. Furniture & Lighting List

3. Finishes Spec. List Descriptions

4. Furniture Spec. List Descriptions

5. Lighting Spec. List Descriptions

Installed By
Finishes Used Throughout GC= GENERAL CONTRACTOR
(CT-1) Carpet GC QTY REDUCED
(WC-1) Wallcovering GC QTY REDUCED
Lobby 101/HALLWAY 103/HALLWAY 105
(CT-1) Carpet *Included in Finishes Used Throughout*
(FT-1) Terrazzo look tile GC
(FT-2) Black Floor Tile GC
(WC-1) Wallcovering *Included in Finishes Used Throughout* (WC-2) Wallcovering at Curved Walls into Stage GC
(PS-1) Porcelain at Lobby wall GC PREVIOUSLY WT-4
(MP-2) Custom Laser Cut Circular Pattern for Ceiling GC (MP-5) Custom Laser Cut Logo for Floor GC
VIP ENTRY 131/HALLWAY 129
(WC-3) Wallcovering at Ticket Booth GC
(CT-1) Carpet *Included in Finishes Used Throughout* GC (WC-1) Wallcovering*Included in Finishes Used Throughout* GC BAR 102
(WT-1) Black Field Tile at Bars GC
(WT-2) (WT-3) Black Deco Tile at Bars GC
(CT-1) Carpet *Included in Finishes Used Throughout* GC (WC-1) Wallcovering *Included in Finishes Used Throughout* GC (MP-2) Custom Laser Cut Circular Pattern for Ceiling GC (M-2) Antique Custom Red Mirror Finish Panel GC
(WC-12) Custom Wallcovering on Mylar GC

REPLACEMENT
FOR M-2
(MP-1) QTY 2

REMOVED
RETAIL LOUNGE 100
(CT-1) Carpet *Included in Finishes Used Throughout* GC (WC-1) Wallcovering*Included in Finishes Used Throughout* GC (MP-2) Custom Laser Cut Circular Pattern for Ceiling GC (WC-9) Custom Print Wallcovering GC

PREVIOUSLY IN

GC BUDGET
ENTRY 108/GENERAL ADMISSION 111/ BAR 117
(WC-11) Diamond Pattern Acoustics on Stage Walls and Near Entry GC QTY REDUCED (WT-1) Black Field Tile at Bar GC QTY REDUCED
(M-1) Antique Mirror Finish for Back Bar GC
(MP-6) Custom Laser Cut Logo Near Stage Entry GC ADDED TO SCOPE (EH-1)
(M-1)
(CC-1)
(MP-3)

REMOVED
SOUND BOOTH 109/PREMIUM SEATING 110
(WT-2) (WT-3) Black Deco Tile at Sound Booth Surround GC (WC-4) Gray Acoustic Wallcovering Around VIP Area GC QTY REDUCED (CT-1) Carpet *Included in Finishes Throughout GC
(CT-2) Carpet in the Sound Booth GC
LOUNGE 121/DRESSING 120/GREEN ROOM 124
(CT-2) Carpet GC
(WC-5) Accent Green Room Wallcovering GC
(WC-8) Second Accent Green Room Wallcovering GC
(WC-6) Main Green Room Wallcovering GC
(WT-1) Wall Tile GC NEW ITEM
(CLG-1)

REMOVED
MEET AND GREET 207/PRIVATE 208/BAR 209
(WC-7) Upstairs VIP Wallcovering GC PREVIOUSLY WC-6
(CLG-1) Black matte Tin Ceiling GC
(CT-1) Carpet *Included in Finishes Throughout GC
(MP-4)
(M-1)

REMOVED
VIP 210
(CT-3) Carpet Inlay in the Stage Area *Included in Finishes Throughout GC (CT-1) Carpet in Stage Area *Included in Finishes Throughout GC (WC-4) REMOVED
HALLWAY 201/UPPER LOBBY 200
(WC-6) Upstairs Hallway Wallcovering GC PREVIOULSY WC-7 (CT-1/CT-4) Throughout GC
(DR-1)
(DR-2)

REMOVED
STAGE RED: FINISHES LIST
Item Description

STAGE RED: FURNITURE
GC= General Contractor
Installed By Bidder= Outside Party
Furniture - Main level and upper level
(S0-1) QTY 2
(UP-1) QT Y 28
(BN-2) QTY 2
(UP-3) QTY 9

REMOVED
(BN-3) Hallway Bench BIDDER
(T-1) Set of 2 Accent Tables BIDDER
(BN-1) QTY 1

REMOVED
(T-3) C-Table BIDDER
(BQ-1) Custom Banquette GC
(UP-5) Upholstery for Custom Banquette (BQ-1) N/A
(T-2) QTY 3

REMOVED
(SO-2) Curved Sofa BIDDER
(UP-2) Upholstery for Curved Sofa (SO-2) N/A
(T-4) Round Coffee Table with Brass Base BIDDER

QTY REDUCED
FROM 4
(CH-1) Upholstered Lounge Chair BIDDER
(UP-5) Upholstery for Lounge Chair (CH-1) N/A

QTY REDUCED
FROM 11
(T-3) C-Table BIDDER

QTY REDUCED
FROM 4
(SO-3) Two Piece Sectional BIDDER
(UP-7)) Upholstery for SO-3 N/A
(T-5) QT Y1
(OT-1) QTY 1
(UP-8) QT Y 2

REMOVED
Installed By
(CS-1) Tufted Counterstool with Metal Legs BIDDER
(UP-5) Upholstery for Tufted Counterstool (CS-1) N/A
(UP-9) Welt for Counterstools N/A
(CH-2) Tufted Dining Chair with Metal Legs BIDDER
(UP-5) Upholstery for Tufted Dining Chair (CH-2) N/A
(UP-9) Welt for Dining Chairs - N/A
(BS-1) Tufted Barstool with Metal Legs BIDDER
(UP-9) Upholstery for Tufted Barstool (BS-1) N/A
(UP-5) Welt for Barstools N/A
(TT-1) 24" Table Top for VIP BIDDER
(TB-1) Table Bases for 24" Table Top VIP BIDDER
(TT-2) 36" Table Top for VIP BIDDER
Lobby 101
Premium Seating 110
Vip Entry 131
Bar 102
Retail Lounge 100
Item Description
Item Description

(TB-2) Table Bases for 36" Table Top VIP BIDDER
(BQ-2) (BQ3) (BQ-4)
Custom Banquettes for VIP - * Banquettes to Include
Decking and Platform GC
(UP-5)
Upholstery for Custom Banquettes for VIP (BQ-2) (BQ-3)
(BQ-4) N/A
(CH-3) Upholstered Vanity Chair BIDDER

QTY REDUCED
FROM 4
(UP-10) Upholstery for Vanity Chair (CH-3) N/A

QTY REDUCED
FROM 10
(CR-1) Clothing Rack S48W WITH WHEELS BIDDER
(CH-6) QTY 2
(UP-6) QTY 6

REMOVED
(SO-7) Channeled Sofa in Green Room Lounge BIDDER
(UP-2) Channeled Sofa Upholstery Seat N/A
(CH-4) Upholstered Lounge Chair with Fringe BIDDER

QTY REDUCED
FROM 4
(UP-5) Upholstery for Lounge Chair Seat N/A

QTY REDUCED
FROM 20
(SB-2) Buffet BIDDER NEW ITEM
(T-3) C-Table BIDDER
(T-13) QTY 1

REMOVED
Installed By
(CH-5) Upholstered Rounded Lounge Chair BIDDER
(UP-4) Upholstery for Rounded Lounge Chair (CH-5) (WAS UP7) N/A (SO-4) Upholstered Tufted Sofa with Metal Accents BIDDER (UP-12) Upholstery for Tufted Sofa with Metal Accents (SO-4) N/A (T-3) C-Table BIDDER
(SB-3) Buffet BIDDER NEW ITEM
(T-7) Large rectangular coffee table BIDDER
(T-6) QTY 1

REMOVED
(CH-7) Upholstered Accent Chair BIDDER
(UP-13) Upholstery for Accent Chair Back (CH-7) N/A
(UP-5) Upholstery for Accent Chair Seat (CH-7) N/A
(T-8) Side Table with Wood Top and Brass Base BIDDER
(T-9) Bluestone Top Coffee Table BIDDER
(SO-5) Upholstered Custom Sectional BIDDER
(UP-14) Upholstery for Custom Sectional (SO-5) N/A
(T-11) Black Wood Vein and Brass Legs Coffee Table BIDDER (SO-6) Upholstered Crescent Sofa N/A
(UP-3) Upholstery for Crescent Sofa (SO-6) N/A
(CH-8) Upholstered Lounge Chairs NBIDDER
(UP-15) Upholstery for Lounge Chair Back (CH-8) N/A
(SB-1) Buffet BIDDER NEW ITEM
(UP-16) Upholstery for Lounge Chair Seat (CH-8) N/A
Item Description
Dressing 120
Lounge 121
Green Room 124
Meet and Greet 207

(T-10) QTY 1
(TT-3) QTY 4
(TB-4) QTY 4
(OT-1) QTY 2
(UP-8) QTY 5

REMOVED
(SB-1) QTY 1
(T-3) QTY 1
(CH-8) QTY 3
(UP-15) QTY 4.5
(UP-16) QTY 7.5

REMOVED
(CH-9) Theater Chair - upholstery included GC
(T-12) Cocktail Table for Theater Chairs GC
Installed By
Decorative Lighting
A Custom Pendant GC
C Wall Sconce with Logo GC
K Wall Sconce GC
F Theater Wall Lights GC
H Exterior Flushmount GC
N Custom Pendant GC
Q Flushmount GC
MIR1 Vanity Mirrors GC

QTY CHANGE
FROM 4
(LAMP2) QTY 1
(LAMP 1 ) QTY 1

REMOVED
Installed By
Signage - Wayfinding
SIGN1 Brass ADA/Wayfinding/Room Sign Plates QTY 25 GC
SIGN2 Entry Stage 108 Stage Red Logo GC
Drapery
DR-1
BAR 102 CS TRACK BLACK STATIONARY

TRACK/FABRICATION BY DRAPERY VENDOR
DR-2
RETAIL LOUNGE 100 CS TRACK BLACK STATIONARY

TRACK/FABRICATION BY DRAPERY VENDOR
DR-3
PREMIUM SEATING 110 WALL MOUNT BRASS W/METAL

RINGS ROD/STATIONARY BY DRAPERY VENDOR
DR-4 SERVICE 118 CS TRACK BLACK STATIONARY SLIT CUT BY DRAPERY VENDOR DR-5
MEET AND GREET 207 WALL MOUNT BRASS W/METAL

RINGS ROD/OPERABLE BY DRAPERY VENDOR
DR-6 VIP 210 CS TRACK BLACK OPERABLE BY DRAPERY VENDOR
UP-17 DRAPERY FABRIC N/A
(BLIND-1) QTY 2

REMOVED
Installed By
Art and Artifacts
Framed Art and Memorabilia
Item Item
Private Room 208
Item Description
Item Description
Upstairs Stage VIP Seating

ART-1 BAR 102 MEMORABILIA GALLERY WALL WEST GC
ART-2 BAR 102 MEMORABILIA GALLERY WALL SOUTH GC
ART-3 BAR 102 MEMORABILIA GALLERY WALL EAST GC
ART-4 RETAIL 100 MEMORABILIA GALLERY WALL NORTH GC
ART-5 RETAIL 100 MEMORABILIA GALLERY WALL EAST GC
ART-6 HALLWAY 105 MEMORABILIA GC
ART-7 HALLWAY 103 MEMORABILIA GC
ART-8 LOUNGE 121 ART NORTH/EAST WALL GC
ART-9 GREEN ROOM 124 ART SOUTH/EAST WALL GC
ART-10 VIP 113 ART NORTH WALL GC
ART-11 UPPER LOBBY 200 NORTH WALL GC
ART-12 RESTROOM 202 ART GC
ART-13 HALLWAY 201 MEMORABILIA GC
ART-14 RESTROOM 206 ART GC
ART-15 PRIVATE ROOM 208 ART GC
ART-16 MEET AND GREET 207 MEMORABILIA GC
ART-17 DECORATIVE MIRROR QTY 3 GC NEW ITEM
ART-18 40x60 MEET AND GREET ART QTY 2 GC NEW ITEM
DEC-1 Décor Accessories
(MIR-1) QTY 4

REMOVED

ATTACHMENT 3
Finishes Spec List Descriptions

STAGE RED - FINISHES
PROJECT: Stage Red
SPEC # DESCRIPTION VENDOR NOTES

ARCHITECTURAL FINISHES
Wall Base
B-1 Brass Finish Base Provided by G.C.

B-2 Blackened Steel Base Provided by G.C.

B-3 Cove Base Provided by G.C.

Floor tile
FT-1 Porcelain Stone Floor Tile Daltile
FT-2 Porcelain Stone Floor Tile Crossville
Grout
GR-1 Grout Provided by G.C.

Engineered Hardwood Tile
EH-1 Engineered Hardwood Tile Nydree
Fiber Reinforced Panel
FRP-1 Black FRP Provided by G.C.

Wall tile
WT-1 Wall tile Architectural Surfaces
WT-2 Wall tile Architectural Surfaces
WT-3 Wall tile Architectural Surfaces
Stain - Wood
ST-1 Wood Stain Provided by G.C.

ST-2 Wood Stain Provided by G.C.

Paint
P-1 Paint Provided by G.C.

P-2 Paint Provided by G.C.

P-3 Paint Provided by G.C.

P-4 Paint Provided by G.C.

P-5 Paint Provided by G.C.

Specialty Finish
PB-1 96" W Pegboard Panel Provided by Millworker
Plastic Laminate
PL-1 Plastic Laminate Provided by G.C.

REMOVED REMOVED

PL-2 Plastic Laminate Provided by G.C.

PL-3 Plastic Laminate Provided by G.C.

PL-4 Plastic Laminate Provided by G.C.

PL-5 Plastic Laminate Provided by G.C.

Wallcovering
WC-1 Vinyl Wallcovering Innovations
WC-2 Vinyl Wallcovering Koroseal
WC-3 Vinyl Wallcovering Momentum
WC-4 Vinyl Wallcovering Momentum
WC-5 Vinyl Wallcovering Koroseal
WC-6 Vinyl Wallcovering Innovations
WC-7 Vinyl Wallcovering Koroseal
WC-8 Vinyl Wallcovering Koroseal
WC-9 Vinyl Wallcovering Momentum
WC-10 Vinyl Wallcovering Momentum
WC-11 Vinyl Wallcovering Momentum
WC-12 Vinyl Wallcovering Koroseal
Metal Finish
MF-1 Blackened Steel Metal Finish Provided by G.C.

Porcelain Slab
PS-1 Porcelain Slab Provided by G.C.

PS-2 Porcelain Slab Provided by G.C.

Powder Coat
PC-1 Powder Coat Provided by G.C.

PC-2 Powder Coat Provided by G.C.

Quartz Countertop
QZ-1 Quartz Countertop Provided by G.C.

QZ-2 Quartz Countertop Provided by G.C.

Solid Surface Countertop
SF-1 Solid Surface Countertop Provided by G.C.

Metal Panel
MP-1 Custom Metal Panel Function Art
MP-2 Custom Metal Panel Function Art
MP-3 Custom Metal Panel Function Art
MP-4 Custom Metal Panel Function Art
MP-5 Custom Metal Panel for Floor Function Art
MP-6 Custom Metal Panel Function Art
Column Cover
CC-1 Custom Column Cover Function Art
CC-2 Metal Column Cover Provided by G.C.

Vinyl Flooring
VF-1 Vinyl Flooring Provided by G.C.

ADDED ADDED REMOVED REMOVED REMOVED REMOVED REMOVED REMOVED ADDED REMOVED

Concrete
CO-1 Concrete Finish Provided by G.C.

Mirror
M-1 Antique Mirror Panel Provided by G.C.

M-2 Custom Antique Mirror Panel Provided by G.C.

Specialty Finish
CT-1 Carpet Crossley Axminster
CT-2 Carpet Tile Tarkett
CT-3 Carpet Logo Crossley Axminster
CT-4 Carpet Border Crossley Axminster
Ceiling Tile
CLG-1 Lay-In Ceiling Tile American Tin Ceilings
Upholstery
UP-1 Upholstery Justin David
UP-2 Upholstery Three sheep and a mill
UP-3 Upholstery Three sheep and a mill
UP-4 Upholstery Three sheep and a mill
UP-5 Upholstery Anzea
UP-6 Upholstery Designtex
UP-7 Upholstery Reid Witlin
UP-8 Upholstery Three sheep and a mill
UP-9 Upholstery Anzea

REMOVEDREMOVED REMOVED

UP-10 Upholstery Concertex
UP-11 Upholstery Momentum
UP-12 Upholstery Three sheep and a mill
UP-13 Upholstery Concertex
UP-14 Upholstery Three sheep and a mill
UP-15 Upholstery Momentum
UP-16 Upholstery Justin David
UP-17 Drapery Fabric Three sheep and a mill
NOTES:

1. Actual dimensions vary depending on field conditions.

2. All quantities must be verified per final construction documents prior to ordering. 3 Any proposed alternatives to these specifications must be equal or better.

REMOVED REMOVED

B-1 METAL BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Number; PPS-5139
Size:

Thickness:

Note:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations.

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

Provided by G.C.
6" Brass Finish Metal Base
Match Prismatic powders transparent Gold
6" High
(Verify per Drawings)
intent and reference only.
.040"

1. Submit sample to designer for approval prior to fabrication. Sheet metal shall be free of rust, scratches, or blemishes.

2. For seam locations refer to construction drawings

1. Installed by General Contractor.

3. Installer to verify quantity requirements prior to order.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

4. All images, photographs, renderings of specified items contained in this specification package are for general design

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

B-2 BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Height:

Finish:

Note:

Location:

NOTES:

Provided by G.C.

Blackened Steel with Matte Sealer
Black
6"
Mill Finish - Desired effect will look random and organic with mix of mill and exposed steel rather than uniform and machined looking sealer. US coating solutions "flex-clear matte" polyurethane clear sealant. Apply per manufacturer's specification. Ensure metal is not primed.

1. Submit sample to designer for approval prior to fabrication. Sheet metal shall be free of rust, scratches, or blemishes.

2. For seam locations refer to construction drawings
(Verify per Drawings)

1. Installed by General Contractor.

2. Refer to finish plan and finish schedule in construction documents for locations.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

3. Installer to verify quantity requirements prior to order.

CT-1 CARPET
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Design ID:

Color:

Size:

End Rows: 138 x 177
Match: Straight
Fire Rating: DOC-FF-70
Location:

Lead Time:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

Crossley Axminster
GT14335-Q9-G2
D17, C14, E100, C97, A100, H94, F18
1'-7.71" x 1'-7.67"
(Verify per Drawings)
10-12 weeks + 6 weeks sea travel

CT-2 CARPET
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Number:

Color:

Size:

Fire Rating: ASTM D - 2859 - Passes
Location:

Lead Time:

NOTES:

Tarkett
Painted Desert G0065
Basin 65411
Blackwater 65412
18" x 36"
(Verify per Drawings)
6 weeks

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CT-3 CARPET
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Design ID:

Color:

Size:

End Rows: 506 x 756
Match: Straight
Fire rating: DOC-FF-70
Location:

Lead Time:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

Crossley Axminster
GT14301-Q9-G1 With Custom Logo
D17, C14, E100, C97, A100, H94, F18
6'-0.29" x 7'-0"
(Verify per Drawings)
10-12 weeks + 6 weeks sea travel

CT-4 CARPET
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Design ID:

Color:

Fire Rating:

Location:

Lead Time:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

Crossley Axminster
Custom Solid Border
E100
DOC-FF-70
(Verify per Drawings)
10-12 weeks + 6 weeks sea travel

CLG-1 LAY-IN CEILING TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Pattern:

Color:

Size:

Style:

Fire Rating: ASTM E 84-03b
Location:

Lead Time:

NOTES:

2. General Contractor to verify that specified tile works with ceiling grid prior to order.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Must meet all applicable local, state, and federal fire codes of final destination location. The requirements noted within this specification are general, and local flammability requirements may vary. 2' x 2' x 5/16" Black
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.
(Verify per Drawings)
3 Weeks
2' x 2' x 0.10” TH
American Tin Ceilings
Drop In Ceiling Tile
#41
Black Matte

EH-1 ENGINEERED HARDWOOD
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Collection:

Color:

Size:

Thickness:

Finish:

Adhesive: SB1587 (Included)
Edges: Micro-Beveled and Tongue & Groove
Acoustic Rating: ASTM E90 and E492 with the Adhesive
Installation: Refer to Floor Finish Plan
Note: Refer to manufacturer for Install Recommendations Installation:

Location:

Lead Time:

NOTES:
7/16" nominal
Pedestrian 4000 taber UV cured finish
Nydree Flooring
Acrylic infused Engineered Hardwood
Ash
Winter Sky
4" x 47"

3. Installer to verify quantity requirements prior to tile order.

Refer to Floor Finish Plan
(Verify per Drawings)
3-4 Weeks

1. Provided and installed by General Contractor.

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Refer to manufacturer for install recommendations.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 23 of 152

REMOVED

FRP-1 FIBER REINFORCED PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color: #S87N Smooth Black
Size:

Finish:

Rating: Class C
FS/SD: 170/190
Note: Trim Finish to Match FRP-1
Location:

NOTES:

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

Marlite
Fiber Glass Reinforced Panel
4' x 8' Sheets
Smooth
(Verify per Drawings)

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

FT-1 PORCELAIN FLOOR TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Pattern:

Color:

Size:

Thickness:

Finish:

Note: Refer to manufacturer for Install Recommendations Grout:

Grout Joint:

FS/SD:

Installation:

Location:

Lead Time:

NOTES:

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

Number: #60
Type: Fusion Pro/Single Compnent Grout
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Refer to manufacturer for install recommendations.

3. Installer to verify quantity requirements prior to tile order. (Verify per Drawings)
In Stock
Matte
1/8"
Non-Combustible
Refer to Floor Finish Plan
Contact: Dale Roberts - #951.225.0243; [email protected]

1. Provided and installed by General Contractor.

2. Refer to finish plan and finish schedule in construction documents for locations for tile. (GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
5/16"
Daltile
Porcelain Stone Floor Tile
Outlander
Sterling OU57
12" x 24"

FT-2 PORCELAIN FLOOR TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Pattern:

Color:

Size:

Thickness:

Finish:

Note: Refer to manufacturer for Install Recommendations Grout:

Grout Joint:

FS/SD:

Installation:

Location:

Lead Time:

NOTES:
5/16"
Unpolished with Cross-Sheen
(GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Crossville
Porcelain Floor Tile
Retro Active 2.0 and Patterns
Armor
3" x 12"

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Number: #60

3. Installer to verify quantity requirements prior to tile order.

Type: Fusion Pro/Single Compnent Grout
Contact: Dale Roberts - #951.225.0243; [email protected] 1/8"
Non-Combustible
Refer to Floor Finish Plan
(Verify per Drawings)
4-6 Weeks

1. Provided and installed by General Contractor.

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

7. Refer to manufacturer for install recommendations.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

GR-1 GROUT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

Type:

NOTES:

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

3. Install per manufacturer's specifications and recommendations.

Custom Building Products
Charcoal
#60
Fusion Pro/Single Component Grout

MF-1 METAL FINISH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Material:

Finish:

Gauge:

Location:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

5. Install per manufacturer's specifications and recommendations.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

7. For seam locations refer to construction drawings.

3. Installer to verify quantity requirements prior to order.

1. Provided and installed by General Contractor.

2. Refer to finish plan and finish schedule in construction documents for locations.

1. Submit sample to designer for approval prior to fabrication. Sheet metal shall be free of rust, scratches, or blemishes.

2. For seam locations refer to construction drawings
By General Contractor
Blackened Steel with Matte Sealer
Mill Finish - Desired effect will look random and organic with mix of mill and exposed steel rather than uniform and machined looking sealer. US coating solutions "flex-clear matte" polyurethane clear sealant. Apply per manufacturer's specification. Ensure metal is not primed.
(Verify per Drawings)

MP-1 METAL PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

NOTES:

Function Art Design
Custom Metal panel At Bar
(PC-1)
2'-0" W x 8'-2"H
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 29 of 152

REMOVED

MP-2 METAL PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

NOTES:

Function Art Design
Custom Laser Cut Circular pattern For Ceiling
(PC-2)
5'-8" DIA
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

MP-3 METAL PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

NOTES:

Function Art Design
Custom Laser Cut Art Deco Pattern For Stage Bar
(PC-2)
1'-9-3/8" W x 8'-3/4"H
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 31 of 152

REMOVED

MP-4 METAL PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

NOTES:

Function Art Design
Custom Backlit Laser Cut Art Deco Pattern
(PC-2)
8'-5-1/2" W x 2'-10"H Width at 1'-5" Return
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 32 of 152

REMOVED

MP-5 METAL PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer: Function Art Design
Product: Custom Metal Cutout of Logo for Floor
Color: (PC-1)
Size: 12" Dia.

NOTES:
reference only.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

MP-6 METAL PANEL
PROJECT: Stage Red

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

Location:

NOTES:
(Verify per Drawings)

1. Provided and installed by General Contractor.

Function Art Design
Custom 36" Metal Cutout of logo
(PC-1)
36" Dia.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ADDED

CC-1 CUSTOM COLUMN COVER
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

NOTES:

Function Art Design
Custom Art Deco Column Cover
(PC-2)
5'-0" W x 5'-10-1/8" H
reference only.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX 34 of 152

REMOVED

CC-2 COLUMN COVER
PROJECT: Stage Red

SPECIFICATION
Manufacturer:

Product:

Color:

NOTES:

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing. reference only.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and Fry Reglet
SD: Small Diameter Column Cover
Match (PC-2)

VF-1 VINYL FLOORING
PROJECT: Stage Red

SPECIFICATION
Manufacturer:

Collection:

Color:

Number:

Finish:

Thickness:

Install:

Note:

Location:

NOTES:

Black

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

Per Manufacturer's Specifications
All required trims per manufacturer requirements
(Verify per Drawings)
Protect-All Flooring
Classic Series
OP050003
Matte
1/4"

REMOVED

M-1 MIRROR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

Thickness:

Lead Time:

NOTES:
3 Weeks
Luminux
Iconic Antique Mirrors
Lumiere
4' x 8' Sheets

0.02"
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 35 of 152

REMOVED

M-2 MIRROR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Size:

Thickness:

Lead Time:

NOTES:
3 Weeks
Luminux
Tropical Syrup
Custom Colored to Pantone 3546c
4' x 8' Sheets

0.02"
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

P-1 PAINT - LOOKING GLASS
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

LRV:

Sheen: Eggshell
Location:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

Doors & Trim - Semi-Gloss
Ceiling - Flat / Matte
Soffit - Flat / Matte
Walls - Eggshell
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

7. Flame spread and smoke developed ratings are determined by substrate used and its rating.

Louvres - Flat / Matte

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

5. Refer to preamble for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.

6. Submit all new substitutions to the Ideation Design Group for written approval prior to manufacturing and purchasing.

Dunn-Edwards
Looking Glass
23 2. Flame Spread and Smoke Developed Rating are determined by substrate used and its rating.

3. Paint Finish Legend:

1. Provided and installed by General Contractor.

DE6376
(Verify per Drawings)

P-2 PAINT - JET
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

LRV:

Sheen: Eggshell
Location:

NOTES:

3. Paint Finish Legend:

Dunn-Edwards
Jet
DE6378
9 (Verify per Drawings)

1. Provided and installed by General Contractor.

2. Flame Spread and Smoke Developed Rating are determined by substrate used and its rating. reference only.

5. Refer to preamble for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.

6. Submit all new substitutions to the Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Flame spread and smoke developed ratings are determined by substrate used and its rating.

Doors & Trim - Semi-Gloss
Ceiling - Flat / Matte
Soffit - Flat / Matte
Walls - Eggshell
Louvres - Flat / Matte

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

P-3 PAINT - COVERED IN PLATINUM
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

LRV:

Sheen: Eggshell
Location:

NOTES:

3. Paint Finish Legend:

Dunn-Edwards
Covered in Platinum
DE6367
46 (Verify per Drawings)

1. Provided and installed by General Contractor.

2. Flame Spread and Smoke Developed Rating are determined by substrate used and its rating. reference only.

5. Refer to preamble for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.

6. Submit all new substitutions to the Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Flame spread and smoke developed ratings are determined by substrate used and its rating.

Doors & Trim - Semi-Gloss
Ceiling - Flat / Matte
Soffit - Flat / Matte
Walls - Eggshell
Louvres - Flat / Matte

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

P-4 PAINT - DARK ENGINE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

LRV:

Sheen: Eggshell
Location:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. reference only.

5. Refer to preamble for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.

6. Submit all new substitutions to the Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Flame spread and smoke developed ratings are determined by substrate used and its rating.

Ceiling - Flat / Matte
Soffit - Flat / Matte
Walls - Eggshell
Louvres - Flat / Matte

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and Doors & Trim - Semi-Gloss

1. Provided and installed by General Contractor.

2. Flame Spread and Smoke Developed Rating are determined by substrate used and its rating.

3. Paint Finish Legend:

Dunn-Edwards
Dark Engine
DE6350
5 (Verify per Drawings)

P-5 PAINT - VINTAGE RED
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Name:

Number:

LRV:

Sheen: Eggshell
Location:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. reference only.

5. Refer to preamble for terms, conditions, abbreviations, definitions, responsibilities, and general guidelines for all specified items.

6. Submit all new substitutions to the Ideation Design Group for written approval prior to manufacturing and purchasing.

7. Flame spread and smoke developed ratings are determined by substrate used and its rating.

Ceiling - Flat / Matte
Soffit - Flat / Matte
Walls - Eggshell
Louvres - Flat / Matte

4. All images, photographs, renderings of specified items contained in this specification package are for general design intent and Doors & Trim - Semi-Gloss

1. Provided and installed by General Contractor.

2. Flame Spread and Smoke Developed Rating are determined by substrate used and its rating.

3. Paint Finish Legend:

Dunn-Edwards
Vintage Red
DET427
10 (Verify per Drawings)

PB-1 PEGBOARD PANEL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Finish:

Sheet Size:

Lead Time:

NOTES:

Wallpeg Store
Wallpeg (4) Black Plastic Pegboard Panels
Black
16" x 24"
In Stock
reference only.

3. Install per manufacturer's specifications and recommendations.

4. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. All images, photographs, renderings of specified items contained in this specification package are for general design intent and IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

PL-1 PLASTIC LAMINATE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Finish:

Number:

Sheet Size:

Fire Rating:

Location:

Lead Time:

NOTES:

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all laminate locations.

3. Installer to verify quantity requirements prior to order.

4. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. #909-58
4' x 8'
Flame Spread: 75, Smoke Value: 130
(Verify per Drawings)
2 Weeks
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

1. Provided and installed by General Contractor.

5. Flame Spread and Smoke Developed rating are determined by substrate used and its rating. GC to use fire retardant adhesive, typ.

Formica
Black
Matte

PL-2 PLASTIC LAMINATE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Finish:

Number:

Sheet Size:

Fire Rating:

Location:

Lead Time:

NOTES:

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all laminate locations.

3. Installer to verify quantity requirements prior to order.

4. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.

1. Provided and installed by General Contractor.

Flame Spread: 45, Smoke Value: 40
Wilsonart
Black
#01 High Gloss Premium - Special Order
#1595
4' x 8'
(Verify per Drawings)
2-3 Weeks

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

5. Flame Spread and Smoke Developed rating are determined by substrate used and its rating. GC to use fire retardant adhesive, typ.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

PL-3 PLASTIC LAMINATE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Finish:

Number:

Sheet Size:

Fire Rating:

Location:

Lead Time:

NOTES:

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all laminate locations.

3. Installer to verify quantity requirements prior to order.

4. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.

Flame Spread: 45, Smoke Value: 40
Wilsonart
Hollyberry
#01 High Gloss Premium - Special Order
#D307
4' x 8'
(Verify per Drawings)
2-3 Weeks

1. Provided and installed by General Contractor.

5. Flame Spread and Smoke Developed rating are determined by substrate used and its rating. GC to use fire retardant adhesive, typ.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

PL-4 PLASTIC LAMINATE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Finish:

Number:

Sheet Size:

Fire Rating:

Location:

Lead Time:

NOTES:

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all laminate locations.

3. Installer to verify quantity requirements prior to order.

4. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.

Flame Spread: 75, Smoke Value: 130
Formica
Deco Metal Brushed Black Aluminum
Brushed
#M4254
4' x 8'
(Verify per Drawings)
2 Weeks

1. Provided and installed by General Contractor.

5. Flame Spread and Smoke Developed rating are determined by substrate used and its rating. GC to use fire retardant adhesive, typ.

6. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 46 of 152

REMOVED

PS-1 PORCELAIN SLAB
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Finish:

Code: MML14761530
Size:

Grout:

Grout Joint:

Pattern:

FS/SD:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

3. Installer to verify quantity requirements prior to tile order.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Component Grout
Contact: Dale Roberts - [email protected]
Fiandre Architectural Surfaces
Marmi Maximum
Nero Damascato
120" x 60" x 6 mm TH
Bright

6. Install per manufacturer's specifications and recommendations.

Tightly jointed at seam
Refer to Elevations.

Non-Combustible
(Verify per Drawings)
8-10 Weeks

1. Provided and installed by General Contractor.
reference only.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

PS-2 PORCELAIN SLAB
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Product:

Color:

Finish:

Code: MML14761530
Size:

Pattern:

FS/SD:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

3. Installer to verify quantity requirements prior to tile order.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Install per manufacturer's specifications and recommendations.

Refer to Elevations.

Non-Combustible
(Verify per Drawings)
In Stock

1. Provided and installed by General Contractor.
reference only.

SapienStone
Sapienstone Porcelain
Dark Marquina
Polished
126" x 63" x 12 mm TH

PC-1 POWDER COAT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Name:

Finish:

Location:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

1. Provided and installed by General Contractor.

Prismatic Powders
Ink Black
#PSS-0106
High Gloss
(Verify per Drawings)

PC-2 POWDER COAT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Color:

Name:

Finish:

Location:

NOTES:

Prismatic Powders
Transparent Gold
#PPS-5139
High Gloss
(Verify per Drawings)
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

QZ-1 QUARTZ COUNTERTOP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color: White Fusion
Number:

Finish:

Edge:

Thickness:

Size:

Location:

NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

4. Installer to verify quantity requirements prior to order.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations. (Verify per Drawings)
130" x 65"
Architectural Surfaces
Pental Quartz
BQ8825P
Square Eased Edge - Refer To Detail For More Information 2 CM
Polished
Edge Profile

QZ-2 QUARTZ COUNTERTOP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color: Rose Bay
Finish:

Edge:

Thickness:

Size:

Location:

NOTES:
2 CM
Cambria
Signature Series
Polished
Square Eased Edge - Refer To Detail For More Information

65.5" x 132"
(Verify per Drawings)

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

Edge Profile

SF-1 SOLID SURFACE COUNTERTOP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Series:

Color:

Thickness:

Sheet Size:

Edge:

Finish:

Location:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

4. Installer to verify quantity requirements prior to order.

5. Material must meet all applicable local, state, and federal fire codes of final destination location.

6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

3. Refer to finish plan and finish schedule in construction documents for locations.

Polished
(Verify per Drawings)

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Square Eased Edge - Refer to Detail for More Information Corian Design
Solid Surface
Carbon Concrete
2 CM
30" x 144"
Edge Profile
53 of 152

REMOVED

ST-1 STAIN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Stain:

Note:

Location:

NOTES:

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor.

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all stain locations.

Stain To Match "Minwax Dark Walnut 2716" With Clear Satin Polyurethane Finish. Water Based Stain Shall Not Be Permitted
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). reference only.

4. Sample must be submitted to designer for approval prior to fabrication, along with control sample for comparison.

5. All wood to receive "Flamort T-WC" Fire Retardant. Coating to provide Class B finish with FS/SD 25/25 after stain application.

6. Install per manufacturer's recommendations.

3. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and

1. Sample must be submitted to designer for approval before fabrication along with control samples for comparison

2. All wood to receive "FLAMORT-WC" fire retardent coating to provide class B finish with FS/SD 25/25 after sain application

3. install per manufacturer's recommendations
(Verify per Drawings)

ST-2 STAIN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Stain:

Note:

Location:

NOTES:

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Stain To Match "Wilsonart Laminate Asian Night 7949" With Clear Satin Polyurethane Finish. Water Based Stain Shall Not Be Permitted

1. Sample must be submitted to designer for approval before fabrication along with control samples for comparison

2. All wood to receive "FLAMORT-WC" fire retardent coating to provide class B finish with FS/SD 25/25 after sain application

3. install per manufacturer's recommendations
(Verify per Drawings)

4. Sample must be submitted to designer for approval prior to fabrication, along with control sample for comparison.

5. All wood to receive "Flamort T-WC" Fire Retardant. Coating to provide Class B finish with FS/SD 25/25 after stain application.

6. Install per manufacturer's recommendations.

1. Provided and installed by General Contractor.

2. Refer to Finish Plan and Finish Schedule in Construction Documents for all stain locations.

3. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 55 of 152

REMOVED

UP-1 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
2% Polyurethane, 80% PVC, 18% Polyester Knit Backing
Justin David
Shane
Barn Door
54"
Irregular
4Wks from time of order/receipt of payments
N/A
100,000 Double Rubs
CAL TECH BUL 117 SEC E, UFAC Class 1, NFPA 260
WIPE WITH A SOFT CLOTH WITH COLD WATER AND MILD SOAP; DRY IMMEDIATELY (Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 56 of 152

REMOVED

UP-2 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
5% Recycled Polyester
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
85% Polyester 10% Acrylic
Three Sheep and a Mill
Illedoling
Charcoal
57"
None
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design (Verify per Drawings)
83 yards in stock
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-3 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
100% Polyester
Three Sheep and a Mill
Crosswind
Wolverine
57"
None
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
(Verify per Drawings)
In stock
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

UP-4 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
100% SD Polyester
Three Sheep and a Mill
Krakow Velvets
Blackest Black
56"
None
In Stock
N/A
100,000 Double Rubs
CAL 117, UFAC 1, NFPA - 260
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-5 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
60% Solution Dyed Acrylic 40% Polyester
Anzea
Lafayette
Carmine
54"
None
430 yards in stock
No
100,000 Double Rubs
CAL 117-2013, NFPA 260, UFAC Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-6 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
83 yards in stock
No
100,000 Double Rubs
CAL TB 117-2013
WM (Water)
(Verify per Drawings)
100% Polyester
Designtex
Chamonix Crypton
Midnight
54"
None
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

UP-7 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
100% Polyester
Reid Witlin
Wool Like
Charcoal
55"
None
In Stock
No
100,000 Double Rubs
CA 117, UFAC Class 1, NFPA 260
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-8 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
100% SD Polyester
Three Sheep and a Mill
Krakow Velvets
Steely
56"
None
In Stock
N/A
100,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 63 of 152

REMOVED

UP-9 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
60% Solution Dyed Acrylic 40% Polyester
Anzea
Lafayette
Empire
54"
None
In Stock
No
100,000 Double Rubs
CAL 117-2013, NFPA 260, UFAC Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-10 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
100% Phthalate Free Vinyl
Concertex
Lyon
Slate
54"
None
No
250,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Bleach)
(Verify per Drawings)
851.50 yards in stock

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.

ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-11 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
60% Polyester, 34% Acrylic, 6% Viscose Rayon
Momentum
Amble
Skyline 09156464
54"
None
8 Wks (will advise yds)
Yes
100,000 Double Rubs
CA Bulletin 117 2013, UFAC Class 1, NFPA 260 Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.

ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-12 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
92% Polyester 5% Acrylic, 3% Wool
Three Sheep and a Mill
Seaton
Black
57"
None
In Stock
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.

ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

UP-13 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:

No
250,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Bleach)
(Verify per Drawings)
100% Phthalate Free Vinyl
Concertex
Lyon
Midnight
54"
None
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.

ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

UP-14 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
60% Recycled Polyester, 30% Acrylic, 10% Wool
Three Sheep and A Mill
Symphony
Charcoal Slate
55"
None
No
100,000 Double Rubs
NFPA 260 CAL 117-2013 UFAC 1
W
(Verify per Drawings)
2-3 Weeks
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

UP-15 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:
53% Repreve Recycled Polyester, 47% Polyester
Momentum
Pip
Pepper
55"
1/4" x 1/8"
In Stock
No
200,000 Double Rubs
CA Bulletin 117 2013
WS (Water)
(Verify per Drawings)
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 70 of 152

REMOVED

UP-16 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

DRY IMMEDIATELY
Location:

Lead Time:

NOTES:
100% Polyurethane
Justin David
Hampton
Black Knight
54"
Irregular
N/A
500,000 Double Rubs
CAL TECH BUL 117 SEC E, UFAC Class 1, NFPA 260

WIPE W/ SOFT CLOTH W/ COLD WATER AND MILD SOAP
(Verify per Drawings)
2 Weeks
intent and reference only.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 71 of 152

REMOVED

UP-17 DRAPERY FABRIC
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Color:

Width:

Repeat:

Content:

Railroaded:

Abrasion:

Rating:

Cleaning Code:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent. intent and reference only.
3 Weeks

1. Provided and installed by General Contractor per furniture package.

2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.

3. All images, photographs, renderings of specified items contained in this specification package are for general design (Verify per Drawings)
Three Sheep and a Mill
Krakow Velvets
Blazing Red
56"
None
100% SD Polyester
N/A
100,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Water)

WC-1 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Dobson
Number: ALI-002
Material: Type ll Vinyl
Backing: Non-Woven
Fire Rating: ASTM E84 – Class A
Width: 54" Untrimmed
Repeat: H: 2-1/2" V: 6"
Location:

Lead Time: 7 Weeks
NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

Innovations
Alis
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). (Verify per Drawings)
Alis

6. Wall smoothness to be per manufacturer's recommendation.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

WC-2 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: 47118
Material: Vinyl
Backing: Woven
Fire Rating: Class A NFPA 255, NFPA 101, NFPA 286
Width: 54"
Repeat: N/A
Location:

Lead Time: Waiting for response from rep
Lead Time: 4 Weeks
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Koroseal
Arte
Sienna
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-3 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Ironstone
Number: T2-FD-06
Material: Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 50"
Repeat: 24" H x 50" V
Location:

Lead Time: 4 Weeks
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Momentum
Tower
Foiled
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-4 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Wishful Thinking
Number: PTBT-07
Material: Vinyl
Backing: Fused Polyester
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: N/A
Location:

Lead Time: 10 Weeks
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Momentum
Nufelt Bowtie
Nufelt Bowtie
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-5 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Signature
Number: FL21-07
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 18" x 18"
Location:

Lead Time: In Stock
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Koroseal
Fleur
Fleur
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-6 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Cormorant
Number: MGE-007
Material: Type II Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 54"
Repeat: N/A
Location:

Lead Time: 4 Weeks
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Innovations
Mangrove
Mangrove
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-7 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Cabo
Number: RA21-08
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 24" x 52"
Location:

Lead Time: In Stock
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Koroseal
Arco
Arco
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-8 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Amore
Number: FL21-04
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 18" x 18"
Location:

Lead Time: In Stock
NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Koroseal
Fleur
Fleur
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-9 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color: Custom Colored - PMS 200C and PMS 440C
Number: HAR-08
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 27"
Repeat: V: 32"
Location:

NOTES:

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

Momentum
Source One Signature
Amari
(Verify per Drawings)

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

WC-10 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color:

Number: T2-SS-03
Material: Type II Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 54"
Repeat: N/A
Location:

NOTES:

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Momentum
Tower
Scrape n Scratch
(Verify per Drawings)
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

Flickering Flint
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

6. Wall smoothness to be per manufacturer's recommendation.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

WC-11 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Collection:

Name:

Color:

Pattern Match: Straight Match - Diamond pattern to Line Up Consistently Number: N/A
Material: N/A
Backing: N/A
Fire Rating: Class A
Width: 52-54"
Repeat: N/A
Location:

Lead Time: 8 Weeks
NOTES:

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

6. Wall smoothness to be per manufacturer's recommendation.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

Momentum
N/A
Nufelt Custom Print
Black and Red
(Verify per Drawings)

WC-12 WALLCOVERING
PROJECT: Stage Red

SPECIFICATION
Manufacturer:

Collection:

Name:

Color:

Pattern Match: Per Manufacturer's install instructions
Material: Mylar
Fire Rating: Class A
Width: 54"
Repeat: N/A
Location:

Lead Time: 8 Weeks
NOTES:

6. Wall smoothness to be per manufacturer's recommendation.

5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

1. Provided and installed by General Contractor.

2. Installer to follow manufacturer's recommended installation instructions.

3. Refer to finish plan and finish schedule in construction documents for locations.

4. Installer to verify quantity requirements prior to order.

Koroseal
N/A
Custom Wallcovering
Black with gold mylar
(Verify per Drawings)
ADDED

WT-1 WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Description:

Product:

Color:

Size:

Grout:

Grout Joint:

Pattern:

FS/SD:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

3. Installer to verify quantity requirements prior to tile order.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing. reference only.

6. Install per manufacturer's specifications and recommendations.

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX Contact: Dale Roberts - #951.225.0243; [email protected]

1. Provided and installed by General Contractor.
1/16"
1/2 Offset Horizontal Running Bond - Refer to Elevations.

Non-Combustible
(Verify per Drawings)
In Stock
(GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Architectural Surfaces
Black Field Tile
Reality Field
Night
3 x 12" x 8mm

WT-2 WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Description:

Product:

Color:

Size:

Grout:

Grout Joint:

Pattern:

FS/SD:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

3. Installer to verify quantity requirements prior to tile order.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Contact: Dale Roberts - #951.225.0243; [email protected] (GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Arcitectual Surfaces
Black Deco Tile
Reality Refraction
Night
3 x 12" x 7mm

6. Install per manufacturer's specifications and recommendations. 1/16"
1/2 Offset Horizontal Running Bond. Refer to Elevations.

Non-Combustible
(Verify per Drawings)
In Stock

1. Provided and installed by General Contractor.
reference only.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

WT-3 CERAMIC WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023

SPECIFICATION
Manufacturer:

Description:

Product:

Color:

Size:

Grout:

Grout Joint:

Pattern:

FS/SD:

Location:

Lead Time:

NOTES:

2. Refer to finish plan and finish schedule in construction documents for locations for tile.

3. Installer to verify quantity requirements prior to tile order.

4. Tile must meet all applicable local, state, and federal fire codes of final destination location.

5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and

7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.

Contact: Dale Roberts - #951.225.0243; [email protected] (GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Arcitectual Surfaces
Ceramic Wall Tile
Reality Spectrum
Night
3 x 12" x 11.6mm

6. Install per manufacturer's specifications and recommendations. 1/16"
1/2 Offset Horizontal Running Bond. Refer to Elevations.

Non-Combustible
(Verify per Drawings)
In Stock

1. Provided and installed by General Contractor.
reference only.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ATTACHMENT 4
Furniture Spec List Descriptions

STAGE RED - FURNITURE
PROJECT: Stage Red
SPEC # DESCRIPTION VENDOR NOTES

FURNITURE
CH-1 Chair Kellex
CH-2 Chair Regal Seating
CH-3 Chair Amisco
CH-4 Chair Lily Jack
CH-5 Chair MTS
CH-6 Chair Lily Jack
CH-7 Chair Lily Jack
CH-8 Chair Lily Jack
CH-9 Chair Irwin Seating
BS-1 Barstool Regal Seating
CS-1 Counterstool Regal Seating
TT-1 Table Top - 24" DIA Table Designs
TT-2 Table Top - 36" DIA Table Designs
TT-3 Table Top - 24" DIA UB Klem
TB-1 Table Base - Disc Base The Table Factory
TB-2 Table Base - Disc Base The Table Factory
Chairs
Barstools
Table Tops
Table Base
Counterstools

REMOVED REMOVED REMOVED

TB-3 Not Used Not Used
TB-4 Table Base - Disc Base Style Nations
T-1 Accent Table Four Hands
T-2 Side Table
Mandy Li
Collection
T-3 Community Table
Mandy Li
Collection
T-4 Coffee Table
Mandy Li
Collection
T-5 Side Table
Mandy Li
Collection
T-6 Lounge Table Audo
T-7 Coffee Table Four Hands
T-8 Side Table
Mandy Li
Collection
T-9 Side Table
Mandy Li
Collection
T-10 Coffee Table Nuevo Living
T-11 Coffee Table Nuevo Living
T-12 Cocktail Table Lily Jack
T-13 Coffee Table Four Hands
BQ-1 Custom Banquette Table Logix
BQ-2 Custom Banquette Table Logix
BQ-3 Custom Banquette Table Logix
BQ-4 Custom Banquette Table Logix
BN-1 Bench Four Hands
BN-2 Bench Villa Hallmark
BN-3 Bench Four Hands
Tables
Banquette
Bench
Clothing Rack

REMOVED REMOVED REMOVED REMOVED REMOVED

CR-1 Clothing Rack
William Roberts
Vintage
OT-1 Ottoman ISA
SB-1 Sideboard Four Hands
SB-2 Sideboard Four Hands
SB-3 Sideboard Four Hands
SB-4 Sideboard Four Hands
SO-1 Sofa Villa Hallmark
SO-2 Sofa Villa Hallmark
SO-3 Sofa Charter
SO-4 Sofa Lily Jack
SO-5 Sofa Lily Jack
SO-6 Sofa Lily Jack
SO-7 Sofa Lily Jack
LAMP 1 Floor Lamp
Regina Andrew
Detroit
LAMP 2 Desk Lamp
NOTES:

1. Actual dimensions vary depending on field conditions.

2. All quantities must be verified per final construction documents prior to ordering.

3. Any proposed alternatives to these specifications must be equal or better.

Ottoman
Sideboard
Sofa
Lamps

REMOVED REMOVED REMOVED REMOVED ADDED REMOVED

CH-1 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Frame Finish:

Seat: (UP-5)
Back: (UP-5)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:
(Verify Per Plans)
8 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Kellex
Kennedy Arm Chair
15814-05
Black
24" W x 22.5" D x 33" H x 19.5" Seat Height

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.

CH-2 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Model Number:

Frame Finish:

Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Regal Seating
95T
Black Legs and Brass Ferrules and Foot Rest
17" W x 17" D x 32" H x 18" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CH-3 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Frame Finish:

Seat:

Back: (UP-10)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Amisco
Luongo
30349/69BQ
Sun Gold
(UP-10)
21-1/2" W x 23-1/2" D x 33-5/8" x 18-3/4" Seat Height
450 lbs.
(Verify Per Plans)
8-10 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CH-4 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Finish:

Seat: (UP-5)
Back: (UP-5)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Lily Jack
Lavenue Swivel Lounge Chair Swivel Base
LA2832
Black Fringe
28" W x 31" D x 32" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CH-5 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Frame Finish:

Seat: (UP-4)
Back: (UP-4)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

MTS
Corinth
8000
Brass
28-1/2" W x 26-3/4" D x 32" H
(Verify Per Plans)
10-13 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CH-6 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Frame Finish:

Seat: (UP-6)
Back: (UP-6)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Lily Jack
Onyx Lounge Chair
NX2323
Brass
23" W x 23" D x 29.5" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 96 of 152

REMOVED

CH-7 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Seat:

Back:

Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Lily Jack
Amethyst Swivel Lounge Chair Swivel base
AM3130
(UP-5)
(UP-13)

30.5" W x 30" D x 31.5" H
(Verify Per Plans)
12-14 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

CH-8 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Seat:

Back:

Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Lily Jack
West Coast Desk Chair
WC2525
(UP-16)
(UP-15)

25.5" W x 25.25" D x 31" H
(Verify Per Plans)
12-14 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 98 of 152

REMOVED

CH-9 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Model Number:

Seat Finish:

Seat: No.12 Seat
Back: No.8 Meteor
End Panel: No. 140 Fireside
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Irwin Seating
Empire Theater Chair

63.21.140.8
Carnegie Origin
21" W
(Verify Per Plans)
10-12 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

BS-1 BARSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Frame Finish:

Seat: (UP-9) with (UP-5) welt
Back: (UP-9)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Regal Seating
P4TFT-30 Bar Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 44" H x 21" D x 30" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks

CS-1 COUNTERSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Frame Finish:

Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:

Weight Rating:

Location:

Lead Time:

NOTES:

Regal Seating
P4TFT-30 Counter Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 21" D x 44" H x 26" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

TT-1 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Description:

Table Base:

Size:

Edge:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-1)
24" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks

TT-2 TABLE TOP - 36" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Description:

Table Base:

Size:

Edge:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-2)
36" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks

TT-3 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Description:

Finish:

Table Base:

Size:

Edge:

Location:

Lead Time:

NOTES:

UB Klem
24" Ash Plank
Walnut
(TB-4)
24" Diameter Table Top
1-1/4" Thickness
(Verify Per Plans)
8 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 104 of 152

REMOVED

TB-1 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Product:

Finish:

Table Top:

Size:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. (Verify Per Plans)
8-10 Weeks
clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written (TT-1)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 42" Bar Height

TB-2 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Product:

Finish:

Table Top:

Size:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
(TT-2)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 28.5" Bar Height
(Verify Per Plans)
8-10 Weeks

TB-4 TABLE BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Series:

Finish:

Table Top:

Size:

Location:

Lead Time:

NOTES:

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. is required for any item supplied by a vendor other than the specified source.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Style Nations
Tivoli Black and Brass Collar Table Base
Brass and Black
(TT-3)
17" Dia. X 28.7" H
(Verify Per Plans)
12-16 Weeks
107 of 152

REMOVED

T-1 ACCENT TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). is required for any item supplied by a vendor other than the specified source.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a Four Hands
Cameron Accent
Aged Brass
Tall Table Dims: 8.75" x 8.75" x 20.25" Short Table Dims: 10.75" x 10.75" x 16.5" (Verify Per Plans)
4 Weeks

T-2 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:

Mandy Li Collection
Beryl Side Table
Satin Brushed Brass Top with Black Resin Base
24" D x 42" H - Special Order
(Verify Per Plans)
12-14 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 109 of 152

REMOVED

T-3 COMMUNITY TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Michelle C - Table - ST - 023
Dark Ebony Wood Black Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

T-4 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
GIL Coffee Table - ST - 009
Dark Ebony Wood Birch Top with Satin Brass Base
30" D x 16" H
(Verify Per Plans)
12-14 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

T-5 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Debby Side Table
Dark Ebony Wood Birch Top with Satin Brass Base
21-3/8" D x 24" H
(Verify Per Plans)
12-14 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 112 of 152

REMOVED

T-6 LOUNGE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Audo
Androgyne Lounge Table
Dark stained oak and Kunis Breccia Sand

47.24" W x 17.72" L x 14.96" H
(Verify Per Plans)
4 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 113 of 152

REMOVED

T-7 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:

Four Hands
Masera Coffee Table
Bluestone Slab and Black Oak Base
60" W x 30" D x 12" H
(Verify Per Plans)
4 Weeks
clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

T-8 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Hannah Side Tale - ST - 010
Dark Ebony Wood Birch Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

T-9 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:

Mandy Li Collection
Hannah Side Tale - ST - 010
Bluestone Top with Dark Ebony Wood Birch and Veneer Base 60" W x 40" D x 16" H
(Verify Per Plans)
12-14 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.

T-10 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:

Nuevo Living
Claudio Coffee Table
Black Wood Vein Marble
30" D x 18" H
(Verify Per Plans)
4 Weeks

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 117 of 152

REMOVED

T-11 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023

SPECIFICATION
Manufacturer:

Name:

Finish:

Size:

Location:

Lead Time:

NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Nuevo Living
Pixie Coffee Table
Black Wood Vein Marble with Brushed Gold Legs

42.8" D x 15.8" H
(Verify Per Plans)
4 Weeks

1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a

2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.

IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX

THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).

ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.