COVER LETTER
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
June 6, 2024
City of Fontana
Attention: Ms. Elia Alvarez
8353 Sierra Avenue
Fontana, CA 92335
Subject: Request for Proposals (RFP) – City of Fontana (SQ-87-DE-19-89) Geotechnical Services - Cypress Avenue Storm Drain Phase I Dear Ms. Alvarez,
Fenagh, Inc. dba Fenagh Engineering and Testing is pleased to submit the attached Cost Proposal to provide Geotechnical Services to the City of Fontana on the upcoming Cypress Avenue Storm Drain Phase I Project. As a choice service provider, the City can depend on our focused dedication to ensuring the success of each and every project that we are assigned to.
It is our intention to seamlessly integrate into the City's team with shared goals – we are fully committed to staying on schedule, and ensuring quality on your projects from start to finish.
Approach and Unparalleled Services
• The Fenagh Difference. Our firm sets itself apart by always striving to exceed the expectations of each of our clients. Every project is unique, and we are dedicated to identifying collaborative ways to meet the specific needs of the City of Fontana. It is our mission to provide a proactive and budget-conscious management style that will ensure cost effectiveness for your team throughout the duration of your project, or projects. • EOLAS. Fenagh has invested over $1 million into our customized, cloud-based material testing and inspection reporting system, EOLAS. Through the secure Client Portal, you will have instant access to Daily Field Reports (DFR’s), Engineering reports and laboratory results. Let our Investment work to your teams advantage.
Benefits of EOLAS include real-time reporting, system generated reports, real-time exception logs, real-time notification of test failures or potential test failures, and the elimination of missing reports and missing material samples.
• City of Fontana Experience. Over the past 3 years our professional geotechnical engineering and materials testing team has provided services to the City of Fontana on a variety of public infrastructure projects. Some of the projects include Fire Station 81, Sierra Avenue Widening, and various Traffic Signal assignments. • Accredited Laboratory. All required materials testing for the City of Fontana would be conducted at our 10,000 square foot laboratory in Rancho Cucamonga, California. Fenagh’s state-of-the-art testing laboratories are fully-accredited, and are in compliance with ASTM E329, the Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection. • Fenagh’s Field Team. We will provide certified and experienced professional staff and field staff. Fenagh team members maintain all required certifications through agencies such as ACI, ICC, AASHTO, and local municipalities – among others.
Continued
COVER LETTER
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
• Project Management. Fenagh’s core Project Management Team includes Kevin Ramirez, Project Manager; Bruce Tie, Principal Engineer; and Emil Rudolph, Geotechnical Engineer . Some of their responsibilities on this contract will include the following:
• Maintaining consistent communication directly with the City of Fontana to ensure that all tasks are completed in a timely manner .
• Ensuring that ample staff is always made available for any requested services. • Providing monthly cost reports to identify the status of the project, which will aid in tracking any potential negative impact to the project budgets.
• Reviewing all daily field reports and laboratory test results to verify that all work is being performed in accordance with all applicable project plans and specifications. • Meeting with the designated project team, as needed, to review the project scope or to obtain feedback.
Firm Information
Name of Firm: Fenagh, Inc. dba Fenagh Engineering and Testing DIR Registration No. 100004874
Corporate HQ: 2110 Rheem Drive, Pleasanton, CA 94588 | Phone: (925) 403-4747 Local Office & Laboratory: 9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 We appreciate your consideration, and we look forward to continuing our relationship with the City of Fontana.
Our team will remain available to answer any questions or concerns that may arise during the proposal review process.
Kevin Ramirez
Project Manager | Business Development Manager
Phone: (909) 727-1431
[email protected]
Respectfully Submitted,
Fenagh Engineering and Testing
EXPERIENCE THE FENAGH DIFFERENCE.
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374
COST PROPOSAL
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
PROPOSAL
ITEM NO. WORK ACTIVITY DESCRIPTION TEST/
STANDARD
ESTIMATED
QUANTITY UNIT UNIT
RATES SUBTOTAL
PORTLAND CEMENT CONCRETE
(EXCLUDES SIGNAL POLE
FOUNDATIONS)
1 Sampling of Fresh Portland Cement
Concrete (Required when performing the
following tests: ASTM C143, C173, C231,
C138, C191, C266, CT515, CT530)
ASTM C172 240 HR $100.00 $24,000.00
2 Compressive Strength Testing of
Portland Cement Concrete (Each test
shall include four - 6”x12” cylinders;
Molding and Curing shall be per ASTM
C31 and shall be included in this cost for
this item; Bid is per each cylinder
obtained; Assumes 60 total tests)
ASTM C39 240 EA $18.00 $4,320.00
3 Slump of Portland Cement Concrete ASTM C143 60 EA $0.00 $0.00
CAST-IN-PLACE DRILLED HOLES (CIDH)
(SIGNAL POLE FOUNDATIONS)
4 Sieve Analysis for Aggregate (Fine
/Coarse) for Portland Cement Concrete CT202 2 EA $70.00 $140.00 5 Cleanness Value for Aggregate (Coarse)
for Portland Cement Concrete CT227 2 EA $75.00 $150.00
6 Sand Equivalent for Aggregate (Fine) CT217 2 EA $70.00 $140.00 (SUBMIT ONLINE)
COST PROPOSAL - SCHEDULE
GEOTECHNICAL SERVICES
CYPRESS AVENUE STORM DRAIN (PHASE I) PROJECT
COST PROPOSAL
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 7 Sampling of Fresh Portland Cement
Concrete (Required when performing the
following tests: ASTM C143, C173, C231,
C138, C191, C266, CT515, CT530)
ASTM C172 24 HR $100.00 $2,400.00
8 Slump/Penetration Test for Portland
Cement Concrete
ASTM C143 or
CT533 3 EA $0.00 $0.00
9 Compressive Strength Testing of
Portland Cement Concrete (Each test
shall include four - 6”x12” cylinders;
Molding and Curing shall be per ASTM
C31 and shall be included in this cost for
this item; Bid is per each cylinder
obtained; Assumes #3 total tests)
CT521 12 EA $18.00 $216.00
ASPHALT CONCRETE PAVEMENT
10 HVEEM Stability Test (S-Value) of Asphalt
Concrete CT304 and CT366 24 EA $150.00 $3,600.00
11 Combined Aggregate Gradation of
Asphalt Concrete (AC) CT202 24 EA $100.00 $2,400.00
12 Asphalt Binder Content/Gradation
AASHTO T164/
T308/ T319, ASTM
D2172/ D4125/
D6307 and CT382
24 EA $150.00 $3,600.00
13 Asphalt Concrete (AC) Field Density Test ASTM D2950
(Nuclear) 520 HR $105.00 $54,600.00
14 Asphalt Concrete (AC) Lab Density Test CT304 12 EA $125.00 $1,500.00
SUBGRADE/TRENCH BACKFILL (NATIVE
SOIL)
15 Laboratory Maximum Density Testing of
Native Soil ASTM D1557 12 EA $100.00 $1,200.00
16 Field Density/Relative Compaction of
Native Soil
ASTM D6938
(Nuclear) 520 HR $105.00 $54,600.00
SUBGRADE (CMB)
17 Laboratory Maximum Density Testing of
CMB ASTM D1557 3 EA $100.00 $300.00
18 Field Density/Relative Compaction of
CMB
ASTM D6938
(Nuclear) 380 HR $105.00 $39,900.00
19 Sieve Analysis of CMB CT202 3 EA $70.00 $210.00
20 Grading of CMB ASTM C131 3 EA $100.00 $300.00
21 R-Value of CMB CT 301 3 EA $175.00 $525.00
COST PROPOSAL
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
22 Sand Equivalent of CMB CT 217 3 EA $75.00 $225.00
23 Percentage Wear of CMB ASTM C131 3 EA $75.00 $225.00 24 Durability of CMB CT229 3 EA $75.00 $225.00
BEDDING MATERIAL
25 Laboratory Maximum Density Testing of
Bedding Material ASTM D1557 3 EA $100.00 $300.00
26 Field Density/Relative Compaction of
Bedding Material
ASTM D6938
(Nuclear) 380 HR $105.00 $39,900.00
27 Sieve Analysis of Bedding Material CT202 3 EA $70.00 $210.00 28 Sand Equivalence of Bedding Material CT217 3 EA $70.00 $210.00 OFFICE
29 Project Management N/A 1 LS $500.00 $500.00
30 Prepare Test Results Summary Report
(separate from onsite summary report) N/A 1 LS $1,000.00 $1,000.00 $236,896.00PROJECT TOTAL
SCHEDULE OF FEES
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
Standard Discounted
* FIELD INSPECTION SERVICES National Standard Rate/Hour Rate/Hour Steel Visual Welding $161.00
Steel Visual Bolting $161.00
Nondestructive - UT, MT, PT $161.00
Steel Visual/NDT Combination $161.00
Concrete Sampling $161.00 $100.00
Batch Plant Inspection $161.00
Concrete ICC/ACI-II (Rebar/Placement) $161.00 $100.00
Concrete PT $161.00
Masonry $161.00
Fireproofing (Thickness/Density) $161.00
Firestopping/Fire-safing $161.00
Soil Technician w/Nuclear Gauge and/or Sand Cone $161.00 $105.00 Asphalt Technician w/Nuclear Gauge $161.00 $105.00
Roofing & Weatherproofing/Waterproofing $161.00
Structural Wood Framing $161.00
Shotcrete $161.00
Fiber Reinforced Concrete (FRP) $161.00
Lead/Multi-Disciplined Inspector $161.00
Specialty Inspector where certification not above is required $161.00 Certified Cal OSHA Tower Inspector $161.00
Quality Control Manager $161.00
ASNT Level III $161.00
Laboratory Technician/Sample Runner $161.00
Project Coordinator $161.00
Technician Typist $161.00
**PROFESSIONAL SERVICES
Principal Engineer (Civil/Structural) $348.00 $200.00
Geotechnical Engineer $348.00 $200.00
Consulting Engineer (Envelope) $316.00
Associate Engineer, Licensed $241.00
Project Geologist $241.00
Project Manager $241.00 $75.00
Staff Engineer $241.00 $150.00
Field Supervisor $214.00 $125.00
SPECIAL SERVICES
Portable and Mobile Laboratories, Concrete and Soils QOR *** Off-Site Structural Steel or Precast Fabrication $198.00 * Epoxy Bolt Proof Load/Pull Testing $144.00
* Expansion Anchor Proof Load/Torque Testing $144.00
* Coring, 1 Person (including equipment) $348.00
* Coring, 2 Persons (including equipment) $455.00
Engineering Project Research QOR
Skidmore-Wilhelm Equipment Fee Per Hour $80.00
Geotechnical Site Investigations/Foundation Reports $8,025.00 Rebound Hammer, Schmidt Hammer, Windsor Probe - Equipment Fee Per Hour $275.00 Floor Flatness Testing FF/FL - (Equipment Fee $100/Hour) $316.00 Floor Flatness Testing FF/FL - Report Fee $535.00
Measuring Moisture Vapor Emission Rate (Calcium Chloride) - $100/Kit ASTM F1869 $123.00 Relative Humidity Testing - ($100/kit) ASTM F2170 $123.00 GPR (Ground Penetrating Radar) - Equipment Fee $175/Hour $375.00 Concrete Crack Gauge Monitoring $375.00
Building Evelope - Air Leakage Rate by Fan Pressure ASTM E779 $803.00 Water Penetration of Windows, Skylights, Doors and Curtain Walls by Uniform or Cyclic Pressure ASTM E1105 $3,050.00 Air and Water Infiltration Leakage Testing AMMA 501.2 $3,050.00 Electronic Leak Detection of Roof (Vector Mapping) QOR
Air Content Test Equipment $107.00
Slump & Temperature Equipment $107.00
Fireproof Density and Adhesion/Cohesion Inspection Kit $107.00 Dynamic Cone Penetrometer (DCP) QOR
Gamma Gamma/ Cross Hole Sonic Logging (CSL) Testing $3,306.00 Administration, Accounting, Special Projects, Notary, Certified Payroll $134.00 $50.00 Concrete/Grout/Mortar Mix Design Review (less than 48 hours notice - $500) $375.00 Welding Procedure Review (less than 48 hours notice - $500) $375.00 Welder Qualification Test Record AWS $1,070.00
Geotechnical Pad Letter (less than 48 hours notice - $2,000) $1,605.00 Final Letter (less than 48 hours notice - $2,000) $1,605.00 Expert Witness Court appearance, per day $2,568.00
FET 2024-2025 FEE SCHEDULE
PERSONNEL FEES AND BASIS OF CHARGES
INSPECTIONS, ENGINEERING & SPECIAL SERVICES
* Field inspection services will be billed in accordance with minimums shown on Basis of Charges. **Professional engineering services and laboratory technician services will be billed at actual time. *** All plant inspections are located within 50 miles of the project location. Steel shops will be AISC certified and concrete plants will be PIC certified. **** Two inspections performed by the same inspector during a site visit will be billed at the combination rate. ***** Three or more inspections performed by the same inspector during a site visit will be billed at the multi-disciplined rate.
INSPECTING
TESTING
ENGINEERING
All fees subject to Basis of Charges
All Fees Subject to Basis of Charges
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374
SCHEDULE OF FEES
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
INSPECTING
TESTING
ENGINEERING
GENERAL
MINIMUM HOURLY CHARGES – INSPECTION
Field services will be billed in 2-hour increments and actual hours worked after 4 hours:
One-half day or less 4 Hours
Over one-half day 8 Hours
Show-up time (less than 2 hours notice = 4 hour charge) 2 Hours
WORKING HOURS AND PREMIUM TIME
Regular workday is the first 8 hours between 6:00 am and 6:00 pm Monday through Friday. Premium time is as follows:
Overtime, Weekdays and Saturdays (first 8 hours) 1.5 x quoted hourly rate Overtime Saturdays (over 8 hours) and Sundays (first 8 hours) 2 x quoted hourly rate Overtime Sundays (over 8 hours) and Holidays 3 x quoted hourly rate Shift differential, swing and graveyard - (Work performed between 2:00 pm and 4:00 am) 1.5 x quoted hourly rate MISCELLANEOUS CHARGES - Only Where Applicable
Notary Services Fee $25.00/each
Facsimile Charges. Plus $1.00/page (n/c for cover page) $5.00 minimum Wireless Router/Data Card for Jobsite Internet $100.00/day Parking Fees At Cost
Air Travel Cost Plus 5%
Outside Services Cost Plus 20%
Per Diem $125.00/day
Mileage Standard Federal Rate
Sample Pickup $40.00/Each $10.00/Each
Weekend Sample Pickup $75.00/hour
Project Administration 10% of Monthly Invoice
Samples Made by Others $110 + Test Cost
Laboratory Sample Witness Fee $100.00
EZ Cure Boxes (Thermostatically Controlled Curing Boxes) QOR Returned Check Fee $100.00
Expedited Dispatch Request (inspections scheduled less than 12 hours notice) 1.5 X quoted hourly rate TESTS
LIMIT OF LIABILITY
The total liability of Fenagh, LLC is limited to the contract dollar value.
INSURANCE
For the waiver of subrogation if required by client, a 3% Fenagh administrative fee will be added to all gross billings/revenue in addition to the 3% Project Management fee.
PAYMENT
Fees for tests and inspection include cost of technician, normal equipment and regular reports. Engineering services other than supervisory will be charged at applicable rates. For engineers, consultants, supervisors, and laboratory technicians traveling to a jobsite, standard federal rate per mile will be charged portal-to-portal for all projects. Fees for special projects, services overseas, or elsewhere in the United States, will be quoted on request. With prior notification to Client; charges are subject to change at any time. Fenagh reserves the right to adjust the rates quoted in this contract based upon any CPI/state mandated increases and/or changes in any industry requirements.
Testing fees shown include normal time for performing test. Samples requiring special preparation will be charged at the laboratory technician rate. Fees for tests not listed will be quoted upon request. There will be a minimum charge of $100.00 for any engineering report. Please note some tests maybe tested by sub consultants. Samples delivered to the laboratory after 3:00pm or samples needing results within 24 hours will incur a 50% mark-up.
Invoices will be submitted monthly for services performed during the preceding month and are payable on receipt. Interest of 1.5% per month (but not exceeding the maximum rate allowable by law) will be payable on any amounts not paid within 30 days, payment thereafter to be applied first to accrued interest and then to the principle unpaid amount. Attorney’s fees or other costs incurred in collecting any delinquent amount shall be paid by client. Visa, MasterCard and American Express payments are accepted however fees will apply. Visa and MasterCard payments require an additional 3% on top of the amount of the invoice being paid. American Express payments require an additional 4% on top of the amount of the invoice being paid.
BASIS OF CHARGES
All fees subject to Basis of Charges
All Fees Subject to Basis of Charges
SCHEDULE OF FEES
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
INSPECTING
TESTING
ENGINEERING
Standard Discounted
CONCRETE National Standard Rate/Each Rate/Each
Compressive Strength of Cylindrical Concrete Specimens (6x12) ASTM C39 $59.00 $18.00 Compressive Strength of Cylindrical Concrete Specimens (4x8) ASTM C39 $59.00 Compressive Strength of Cylindrical Concrete Specimens (over 3500 psi) ASTM C39 $91.00 Compressive Strength of Cylindrical Concrete Specimens (over 6000 psi) ASTM C39 $123.00 Cylinder molds. 6” x 12” and 4" x 8" (Per Case) ASTM C470 $64.00 Compressive Strength of Lightweight Insulating Concrete ASTM C495 $70.00 Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (cores) ASTM C42 $161.00 Flexural Toughness of Fiber Reinforced Concrete (Round Panel) ASTM C1550 $321.00 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C78 $225.00 Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Shrinkage 1 Sample) ASTM C157 $107.00 Shotcrete Nozzleman Qualification ACI 506, ASTM C42 and C1140 $321.00 Shotcrete Pre-Qualification Cores ACI 506, ASTM C42 and C1140 $80.00 Shotcrete Production Cores ASTM C1140 $80.00
Coefficient of Thermal Expansion AASHTO T336 $385.00
Determining Density of Structural Lightweight Concrete (Cylinders) ASTM C567 $348.00 Standard Specification for Concrete Made by Volumetric Batching and Mixing ASTM C685 $829.00 Cement Quality Sampling $626.00
Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete ASTM C472 $54.00 Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496 $268.00 Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression ASTM C469 $278.00 Grab Sample, Sealing and Storing in a Humidity and Temperature Controlled Room $214.00 Density of Hydraulic Cement ASTM C188 $278.00
Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832 $214.00 GFRC Pull Test PCI $535.00
GFRC Flexural Test PCI $535.00
Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796 $64.00 Petrographic Analysis $3,745.00
MASONRY
Compressive Testing of Grout (Masonry) ASTM C1019 $91.00 Compressive Strength of Hydraulic Cement Mortars Using 2" Cube Specimens ASTM C109 $134.00 $50.00 Compressive Strength of Masonry Prisms ASTM C1314 $134.00 Testing Concrete Masonry Units and Related Units (Core Compression) CBC 2105A.4 $187.00 Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2" Sample) ASTM C780 A7.6 $161.00 Testing Concrete Masonry Units (CMU) and Related Units (Full Unit) ASTM C140 $268.00 Linear Drying Shrinkage of Concrete Masonry Units (Per Unit) ASTM C426 $268.00 Masonry Core Shear Testing $268.00
Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight) ASTM C140 $428.00 Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate, efflorescence)*
ASTM C67 $1,070.00
Mortar Molds. 2” x 4”. Single Use $134.00
Mortar or Grout, Stored and Cured, Not Tested (including mold) $134.00
AGGREGATES (SOILS AND CONCRETE)
Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only) ASTM C136 $161.00 $70.00 Sieve Analysis of Fine and Coarse Aggregates (Fine Only) ASTM C136 $214.00 $70.00 Sieve Analysis of Fine and Coarse Aggregates (Wash Included) ASTM C117 $268.00 Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only) ASTM C117 $161.00 Evaluating Cleanness of Coarse Aggregate $268.00 $75.00 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate ASTM C88 $187.00 Unit Weight of Aggregate $134.00
Clay Lumps and Friable Particles in Aggregates ASTM C142 $161.00 Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate ASTM D4791 $268.00 Organic Impurities in Fine Aggregates for Concrete ASTM C40 $241.00 Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate ASTM C127 $241.00 Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate ASTM C128 $241.00 Resistance of Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C131 $535.00 $175.00
Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5821 $268.00
Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
ASTM C1252/AASHTO T304A $268.00
Sand Equivalent Value of Soils and Fine Aggregate ASTM D2419 $187.00 $70.00 Flakiness Index of Coarse Aggregate $187.00
Durability Index (Fine) ASTM D3744 $294.00 $75.00
Durability Index (Coarse) ASTM D3744 $294.00 $75.00
Durability Index (Fine and Coarse) ASTM D 3744 $305.00
Lightweight Particles in Aggregate ASTM C123/AASHTO T113 QOR Resistance of Rock to Wetting and Drying CRD-C169 $428.00 *Unusual sample preparation for brick specimen will be charged at the established hourly rate.
LAB CONCRETE AND MASONRY TESTS
All fees subject to Basis of Charges
All Fees Subject to Basis of Charges
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374
SCHEDULE OF FEES
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
INSPECTING
TESTING
ENGINEERING
Standard Discounted
SOILS National Standard Rate/Each Rate/Each
Direct Shear Test of Soils Under Consolidated Drained Conditions ASTM D3080 $455.00 Caltrans Corrosivity Package $455.00
Resistivity and pH Measurements of Soil and Water $214.00 Determining Field and Laboratory Resistivity and pH Measurements for Soil and Water $214.00 Soils and Waters for Sulfate Content $161.00
Soils and Waters for Chloride Content $161.00
Swell Test Under 60psf Surcharge (per SNV Amendments to IBC) ASTM D2435 (Modified) $187.00 Particle-Size Analysis of Soils (with Hydrometer) ASTM D422 $589.00 Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer ASTM D4542 $589.00 Standard Test Method for Particle-Size Analysis of Soils (without Hydrometer) ASTM D422 $482.00 Liquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D4318 $428.00 Laboratory Compaction Characteristics of Soil Using Modified/Standard Effort ASTM D1557/D698 $428.00 $100.00 Field Density Test for Compaction $214.00
Hydrometer Only ASTM D422 $482.00
pH of Soils ASTM D4972 $482.00
Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement Soils by the Stabilometer
ASTM D2844 $642.00
Laboratory Determination of Water(*moisture) Content of Soil and Rock by Mass ASTM D2216 $214.00 Density of Soil in Place by the Drive-Cylinder Method ASTM D2937 $134.00 Expansion Index of Soils ASTM D4829 $401.00
Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter (Permeability) ASTM D5084 $482.00 Lab Compaction Characteristics of Soil 1 Point Proctor (Check Point) ASTM D698/D1557 $241.00 $100.00 Maximum Index Density and Unit Weight of Soils Using a Vibratory Table ASTM D4253 $321.00 Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density ASTM D4254 $321.00 Density of Hydraulic Cement ASTM C188 $294.00
Volatile Organic Content EPA 8260B QOR
Semi Volatile Organics by GC/Ms (Basic Target List) EPA 8270C QOR Total Organic Carbon ASTM 2974/EPA 5310Bm QOR
ICP Metals Concentration EPA 6020 - CAM/CCR 17 QOR
Total Extractable Petroleum Hydrocarbons: TPH, MTBE, Benzene,Toluene, Ethylbenzene, Zylenes, %SS
EPA 8015B QOR
ICP Metals Concentration EPA 6020 QOR
pH EPA 9045D $482.00
Sequential Batch Extraction of Waste with Acidic Extraction Fluid ASTM D5284 QOR Chromium Soluble EPA 7196A QOR
Moisture, Ash and Organic Matter of Peat and Other Organic Soils (Organic Content) ASTM D2974 $268.00 Universal Soil Classification System (USCS) Test ASTM D2487 $428.00 California Bearing Ratio Test ASTM D1883 $428.00
Unconfined Compressive Strength of Cohesive Soil ASTM D2166 $268.00
ASPHALT
Bituminous Material Content of Asphalitic Concrete Mixtures By The Nuclear Method $963.00 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent) ASTM D2172 $803.00 Determining Low Temperature Performance Grade (PG) of Asphalt Binders ASTM 6816 QOR Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores) ASTM D3549 $268.00 Bituminous Mixtures Utilizing Four Inch Marshall Apparatus $248.00 Method of Prep of Bituminous Mixture Test Specimens ASTM D6926 $268.00 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD) ASTM D1188 and D2726 $963.00 Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR) ASTM D6931 QOR Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate ASTM D5444 $375.00 Marshall Stability and Flow of Bituminous Mixtures ASTM D6927 $963.00 Theoretical Maximum Specific Gravity and Density (Rice) ASTM D2041 $375.00 Swell of Bituminous Mixtures $375.00
Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt ASTM D1461 $910.00 Preperation of HMA Superpave Gyratory Compaction AASHTO T312 $963.00 Determination of Voids in Compacted Bituminous Mixtures $482.00 Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method ASTM D6307 $428.00 Determination of Asphalt Binder Content of Asphaltic Concrete Mixtures (RAP) by the Ignition Method $428.00 $150.00 Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method ASTM D6307 $428.00 Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven $428.00 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Set of 6) ASTM D1075 $2,140.00 Compressive Strength of Bituminous Mixtures ASTM D1074 $268.00 ** Does not include sample preparation or sieve analysis
LAB SOILS AND ASPHALT TESTS
* Unusual sample preparation (dried clays, saturated clays, etc.) and all other tests for treated or untreated soils, aggregate subbase and aggregate base will be charged at established rates for laboratory technician.
All fees subject to Basis of Charges
All Fees Subject to Basis of Charges
SCHEDULE OF FEES
9070 Center Avenue, Rancho Cucamonga, CA 91730 | Phone: (909) 587-6374 www.fenaghengineering.com
INSPECTING
TESTING
ENGINEERING
Standard Discounted
METALS MATERIALS MECHANICAL TESTS National Standard Rate/Each Rate/Each Mechanical Testing of Steel Products (General Tensile) ASTM A370 $348.00 $150.00 Fillet Weld Break Test for Qualification (Welding) AWS B4.0 $134.00 Tension Testing of Metallic Materials (Welding Coupon Tensile) ASTM E8, B557 and AWS B4.0 $348.00 Mechanical Testing of Steel Products (Couplers) ASTM A370 $348.00 Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic Materials
ASTM E2248 and ASTM E23 QOR
Testing, Practices, and Terminology for Chemical Analysis of Steel Products ASTM A751 $321.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8 ASTM A370 and E290 $268.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11 ASTM A370 and E290 $321.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+ ASTM A370 and E290 QOR Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
ASTM A370, A82 and A185 $321.00
Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds ASTM E190 and AWS B4.0 $187.00 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor Bolts Only (Tension and Yield)
ASTM F307, F1554 and F606 $375.00
Rockwell Hardness of Metallic Materials ASTM E18 $107.00 Proof Test for Carbon and Alloy Steel (Nuts Only) ASTM A194 or A563 $241.00 Radiographic Examination of Metallic Castings/Weldments ASTM E94, E1030 and E1032 QOR Macroetching Metals and Alloys ASTM E340, E381 and AWS $241.00 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (HSB Assemblies)
ASTM F606 $268.00
Mechanical Testing of Steel Products (Terminators Tensile) ASTM A370 $268.00 Steel Strand, Uncoated Seven-Wire for Prestressed Concrete ASTM A416 and A1061 $1,070.00
OTHER MATERIALS MECHANICAL TESTS
Strength for Sewn or Bonded Seams of Geotextiles ASTM D4884 $428.00 Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure ASTM D2261 $428.00 Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D5034 $375.00 Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars (FRP) ASTM D3039 $856.00 Moisture Content of Non-Typical Materials ASTM C566 $268.00 Aluminum Oxide Content ASTM C25 $803.00
Viscosity of Non-Typical Materials ASTM D2196 $482.00
Plastic Ultimate Tensile ASTM D638 $375.00
FIREPROOFING
Thickness and Density of Sprayed Fire-Resistive Material (SFRM) ASTM E605 $268.00 Cohesion/Adhesion of Sprayed Fire-Resistive Materials (Test Kit Only) ASTM E736 $107.00
CONTACT INFORMATION
Arizona: 1746 E. Madison Street, Suite 5 • Phoenix, AZ 85034 • P 480.867.6877 Nevada: 3842 E. Post Road, Suite B • Las Vegas, NV 89120 • P 702.449.2132 New England: 12 Tech Cir • Natick, MA 01760 • P 617.938.3774 New York: 54-21 73rd Place • Maspeth, NY 11378 • P 516.423.3482 Northern California: 3942 Valley Avenue, Suite A • Pleasanton, CA 94566 • P 925.403.4747 Southern California: 9070 Center Avenue • Rancho Cucamonga, CA 91730 • P 909.587.6374 Southern California: 9474 Chesapeake Drive, Suite 906 • San Diego, CA 92123 • P 858.427.2200 Texas: 3709 Promontory Point Drive, Suite 210 • Austin, TX 78744 • P 925.403.4746 Washington: 22016 68th Avenue South • Kent, WA 98032
LAB METALS AND OTHER MATERIALS TESTS
All fees subject to Basis of Charges
All Fees Subject to Basis of Charges