042126 PW Water Meter RFP Award Thirkettle Corporation (Aqua-Metric Sales Company) Proposal — City Council - Successor Agency

Aqua-Metric Sales Company
4050 Flat Rock Drive
Riverside, CA 92505
Phone: (951) 637-1400
Fax: (951) 637-1500
Primary Contact
Bill Reyes
Territory Manager
Phone: (909) 654+2253
Email: [email protected]
Proposal Response Contact
Kristy Segarra
Bids and Proposals
Phone: (210) 967-6300
Email: [email protected]
Request for Proposal
RFP #2526-RFP-007
Water Meters
Due: Monday, February 23, 2026 at 4:00 PM PST
City of Fullerton, CA
Attn: Jose Alfredo Gonzales
1580 W Commonwealth Avenue
Fullerton, CA 92833
Phone: (714) 738-6549

BID RESPONSE ENCLOSED

ELECTRONIC UPLOAD TO OPENGOV
4050 Flat Rock Drive, Riverside, CA 92505
Phone: (951) 637-1400 Fax: (951) 637-1500
February 23, 2026
Jose Alfredo Gonzales
City of Fullerton, CA
1580 W Commonwealth Avenue
Fullerton, CA 92833
RE: RFP #2526-RFP-007
To Whom It May Concern:

Thirkettle Corporation dba Aqua-Metric Sales Company is pleased to propose our commercial water meter solution to the City of Fullerton (“Fullerton”) in response to their Request for Proposal, RFP #2526-RFP-007 Water Meters, due February 23, 2026 at 4:00 PM.

Aqua-Metric has specialized in the sale, installation, and support of Sensus technologies for more than thirty years.

We are the exclusive Sensus distribution channel partner for three states, and our installation services group has become one of Sensus’s partners throughout the nation providing turn-key AMI solutions. Our in-depth experience has led us to become closely involved with nearly 200 AMI projects, sized from 300 to over 280,000 services.

Furthermore, Aqua -Metric has had the privilege of being the City’s sole-source provider of Sensus metering products for the past decade. We greatly value our partnership with the City and hope to continue our relationship of providing exemplary metering and support services.

The enclosed proposal provides Sensus’s revolutionary iPERL+, OMNI+, and Cordonel water metering with Nicor technology which will seamlessly communicate with the City’s current and/or future metering technology.

As you review our proposal and consider your options, we hope to further present the achievements and abilities of the proposed water meter series. We look forward to the opportunity to partner with the City and appreciate your time and thoughtful consideration.

Sincerely,
Aqua-Metric Sales Company
4050 Flat Rock Drive
Riverside, CA 92505
Phone: (951) 637-1400
Email: [email protected]

Page 1 ends

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company
4050 Flat Rock Drive, Riverside, CA 92505
Phone: (951) 637-1400 Fax: (951) 637-1500
Pricing Assumptions and Clarifications
Aqua-Metric would like to thank the City of Fullerton for allowing us the opportunity to present our Sensus water metering solution in response to the City’s Request for Proposal. We believe our metering product exceeds the requirements outlined within the City’s bid documents, but would like to offer the following clarifications, pricing assumptions, and exceptions to help better understand our proposed response.

1. Standard Terms and Conditions
Aqua-Metric’s proposal has been carefully prepared using information furnished within the City’s Request for Proposals. Aqua -Metric’s response thereto is not intended to be construed as Aqua -Metric’s acceptance or rejection of any specific terms or conditions except where expressly stated herein otherwise. If awarded, Aqua - Metric will enter into the required contract(s) with the City based on Aqua -Metric’s standard agreement(s) and Terms of Sale. All contracts must be executed prior to project start. Enclosed within our response is Aqua-Metric’s Terms of Sale, which will govern, unless there is an executed agreement between the parties.

In recognition of the potential for fluctuation in raw material and inflationary costs, pricing will be held firm for one year, after which pricing may be subject to adjustment(s) based upon inflation rates within the current market and potential supply chain constraints. The percentage change between the response price and the contract price shall not exceed the percentage change issued by Aqua-Metric’s supplier’s actual cost of increase. Prices for products or services unaffected by verifiable cost trends shall not be subject to adjustment.

If modifications in materials, labor, or processing are required to meet new regulations, the pricing submitted herein is subject to immediate change.

RETURNS: Returned product subject to a 25% restocking fee for Sensus water product(s) – must be returned within six months of shipment. Additional details and limitations apply. All non -Sensus product subject to their specific manufacturer’s published return policy.

TAXES AND FEES. All prices quoted are exclusive of federal taxes, state taxes, municipal taxes, tariffs, duties, and other government-imposed fees (collectively the “Taxes and Fees”) related to the procurement, installation, and delivery of materials and equipment. Taxes and Fees will be added to each applicable invoice and are the responsibility of the Customer. If Customer is exempt from sales tax, Customer is required to provide all applicable tax exemption documentation at the time of purchase. Any chan ges in Taxes and Fees may result in adjustments to the final invoice accordingly.

2. Deviations to Specifications
Freight Terms
Freight terms will be prepaid and added unless a purchase order is provided exceeding $80,000 for Sensus products.

Due to unknown quantities, Aqua-Metric is unable to determine freight costs at this time; and therefore, unable to provide freight pricing as a part of our response.

RFP Section 2.1.3, Terms – “In case of default, the City of Fullerton may procure its supplies from other sources and hold the original proposer or contractor liable for resulting increased costs.” Aqua-Metric understands that the City may elect to purchase supplies from other sources in circumstances of default; however, we take exception to being penalized for the difference in price from doing so.

3. Alternate Metering Product
Aqua-Metric is quoting the residential Sensus iPERL+ water meter as an alternate to the RFP’s line item for “Disc Meters”. This premier smart-water meter is available in both a composite and metal flow-tube option. Below is an overview of this meter for the City’s review.

Page 2 ends

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

4050 Flat Rock Drive, Riverside, CA 92505
Phone: (951) 637-1400 Fax: (951) 637-1500

iPERL+ Residential Water Meter Overview
iPERL+ smart water meters offer unparalleled low- flow accuracy with high -flow durability, using innovative magnetic technology to capture previously unmeasured low flow. iPERL+ meters increase returns while maximizing operational efficiency. With no moving parts, lead -free iPERL+ meters maintain their accuracy over a 20 -year lifetime.

With Advanced Metering Infrastructure (AMI) connectivity —as well as 14 condition, diagnostic, and lifetime alarms—iPERL+ meters provide a quick resolution to any issues you may experience in the field.

Features include:
• Improves operational efficiency and customer service
• Reduces non-revenue water, measuring flow rates as low as 0.05 gpm +/- 3% accuracy for 5/8-inch and ¾-inch installations
• Configurable alarm thresholds for continuous flow, high flow, and reverse flow • Reduces maintenance and cost
• Can be installed horizontally, vertically or diagonally • Prevents removal and tampering attempts to obtain free water • Detects system leaks
• Allows remote management, monitoring, and diagnosis
• Collects and logs system and customer data
• Data logging capacity for 2,800 data points (120 days of storage with 1-hour intervals) • Time stamped log data including peak flow, volume, and internal temperature, configurable from 15 -minute to 24-hour intervals
• Preserves energy and optimizes power
The iPERL+ is available in 5/8-inch, 3/4S-inch, 3/4-inch, 1-inch, and 5/8-inch x 3/4-inch sizes.

iPERL+ Water Meter – Composite
Cordonel Water Meter
“Any Flow Rate, Any Installation, One Meter” – For All Your C&I Needs The Sensus Cordonel water meter is an innovative ultrasonic water meter for commercial and industrial (C&I) applications. It features a patented technology that measures low- to-high-volume flow with proven accuracy and the unique flow tube has three measurement channels, allowing you to measure every drop.

Applications for the Cordonel water meter include:
• Measurement for billing of potable water (1.5" - 6" and 50°C to 122F °) • Radio equipped flow meter for walk-by/drive-by readout applications • Metering endpoint in fixed-base, radio-based smart water networks • Measurement of high flow rates; for example, in pumped pipes for irrigation RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 3 ends

4050 Flat Rock Drive, Riverside, CA 92505
Phone: (951) 637-1400 Fax: (951) 637-1500

• Measurement of low flow; for example, in light load periods • Leakage detection
• Flow meter for controlling industrial processes using a pulse output
• Flow meter supplying rich data for DMA analysis
Parabolic Fins: The Cordonel water meter has parabolic fins, which shape the water for optimal accuracy without sensors protruding. This mitigates issues with tight and complex installations.

Three Measurement Channels : Cordonel’s three measurement channels measure 100% of the water profile.

No Measurement Apparatus Extending into Flow Tube: The Cordonel meter does not have a measurement apparatus extending into the flow tube, meaning that no mineral deposits develop. This design reduces wear, helps prevent additive buildup, and results in a longer life for the meter.

Other Features
• Broadest, most accurate range of any ultrasonic meter – best-in-class and differentiated. • Real-world testing with elbows and valves.
• Integrated with Sensus’ Pressure Profile application. • Uses ultrasonic technology with no moving parts or obstruction to the flow. • Maintenance-free over its operational lifetime.
• Largest measuring range: Q3/Q1 R1000.
• Static construction with no moving parts ensures constant accuracy over lifetime; no degradation as components age.
• Unrestricted straight pipe upstream and downstream 0 x DN U0D0 acc. to OIML R49-1:2013. • LCD for consumption, flow, temperature, pressure (optional) and status information. • Integrated radio communication and data logger.
• Secure encrypted data transmission.
• Meter can be submerged; meets protection class IP68 acc. to 60529:2014. • NFC wireless interface for readout of the last volume reading. • 20-year average meter lifetime, including battery, under standard usage conditions. • Optional pulse output with programmable values and lengths. • Meter with MID pattern approval according to annex MI001. • Meter conforms to OIML: R49-2013 and ISO 4064:2017.

Available Options
• Integrated pressure sensor.
• Radio communication on alternative frequencies.
• Pulse output with different pulse modes.

Environmental Conditions
• According to ISO 4064-1:2017
• Environmental Class O acc. to OIML R49-1:2013
• Environmental temperature: 14oF to 44oF (-10oC to 7oC) • Mechanical environmental conditions: Class M2
• Electromagnetic environmental conditions: Class E2
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 4 ends

Item Qty Unit Description
Unit Cost
Direct Read
Unit Cost Encoded
Register W/Nicor Lead Time (days)
1 0 - 1,500 EA 5/8" X 3/4" Disc
2 0 - 1,500 EA 1" Disc
3 0 - 150 EA 1-1/2" Disc
4 0 - 150 EA 2" Disc
5 0 - 50 EA 1-1/2" Compound Meters
6 0 - 50 EA 2" Compound Meters
7 0 - 25 EA 3" Compound Meters
8 0 - 25 EA 4" Compound Meters
9 0 - 3 EA 6" Compound Meters
10 0 - 50 EA 2" Turbine Meters
11 0 - 10 EA 3" Turbine Meters
12 0 - 10 EA 4" Turbine Meters
13 0 - 2 EA 6" Turbine Meters
14 0 - 2 EA 8" Turbine Meters
15 0 - 2 EA 10" Turbine Meters
16 0-200 EA 5/8" X 3/4" Ultrasonic
17 0-200 EA 1" Ultrasonic
16 0 - 50 EA 1-1/2" Ultrasonic Meters
17 0 - 50 EA 2" Ultrasonic Meters
18 0 - 25 EA 3" Ultrasonic Meters

WATER METERS
Proposal Pricing
RFP ID: #2526-RFP
Vendor Name: ___________________________

Page 1 ends

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 5 ends

Item Qty Unit Description
Unit Cost
Direct Read
Unit Cost Encoded
Register W/Nicor Lead Time (days)
19 0 - 10 EA 4" Ultrasonic Meters
20 0 - 2 EA 6" Ultrasonic Meters
21 0 - 2 EA 8" Ultrasonic Meters
22 0 - 2 EA 10" Ultrasonic Meters
23 0 - 250 EA 1" Domestic Fire Meters
24 0 - 25 EA 2" Domestic Fire Meters
25 0 - 25 EA 3" Fire Hydrant Meter W/Backflow
26 0 - 25 EA 2" Strainers
27 0 - 5 EA 4" Strainers
Vendor Representative Name: __________________________________ Vendor Representative Title: __________________________________ Signature: ____________________________________________ Date: __________________________

Page 2 ends

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 6 ends

Aqua-Metric Sales Company February 19, 2026
16914 Alamo Parkway, Bldg. 2 | Selma, TX 78154
Phone: (210) 967-6300 | Facsimile: (210) 967-6305
Client: City of Fullerton, CA
Attention: Jose Alfredo Gonzalez, Purchasing Supervisor Address 1580 W Commonwealth Avenue
City, State, Zip: Fullerton, CA 92833
Project: RFP #2526-RFP-007, Water Meters
Due Date: February 23, 2026 at 4:00 PM
Line No. Item Quantity Tariff Total Unit Extended
RFP #2526-RFP-007, Water Meters
3 Alternate: 1 1/2" OMNI R2 Meter w/ 5' Nicor ILC 1 $15.20 $552.74 $552.74 4 Alternate: 2" OMNI R2 Meter w/ 5' Nicor ILC 1 $19.84 $721.52 $721.52 5 1 1/2" OMNI C2 Compound Meter w/ 20' Nicor ILC 1 $36.00 $1,309.10 $1,309.10 6 2" OMNI C2 Compound Meter w/ 20' Nicor ILC 1 $41.40 $1,505.48 $1,505.48 7 3" OMNI C2 Compound Meter w/ 20' Nicor ILC 1 $52.20 $1,898.24 $1,898.24 8 4" OMNI C2 Compound Meter w/ 20' Nicor ILC 1 $90.01 $3,272.95 $3,272.95 9 6" OMNI C2 Compound Meter w/ 20' Nicor ILC 1 $154.81 $5,629.57 $5,629.57 10 2" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $29.39 $1,068.78 $1,068.78 11 3" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $36.41 $1,323.84 $1,323.84 12 4" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $70.03 $2,546.40 $2,546.40 13 6" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $125.35 $4,558.29 $4,558.29 14 8" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $233.23 $8,481.05 $8,481.05 15 10" OMNI T2 Turbo Meter w/ 20' Nicor ILC 1 $303.81 $11,047.67 $11,047.67 16 Alternate: 5/8" x 3/4" Sensus iPERL Meter w/ 5' Nicor ILC, Composite Body 1 $4.27 $155.44 $155.44 17 Alternate: 1" Sensus iPERL Meter w/ 5' Nicor ILC, Composite Body 1 $6.73 $244.77 $244.77 16 1 1/2" Cordonel Meter w/ 20' Nicor ILC 1 $41.22 $1,498.79 $1,498.79 17 2" Cordonel Meter w/ 20' Nicor ILC 1 $43.75 $1,590.87 $1,590.87 18 3" Cordonel Meter w/ 20' Nicor ILC 1 $60.42 $2,197.25 $2,197.25 19 4" Cordonel Meter w/ 20' Nicor ILC 1 $95.07 $3,457.07 $3,457.07 20 6" Cordonel Meter w/ 20' Nicor ILC 1 $143.06 $5,202.06 $5,202.06 20 8" Cordonel Meter w/ 20' Nicor ILC 1 $246.87 $8,977.00 $8,977.00 23 1" iPERL Fire Service Meter w/ 5' Nicor ILC, Composite Body 1 $7.63 $277.29 $277.29 This quote for the product and services named above is subject to the following terms: Subtotal: $67,516.17 Estimated Tariffs: $1,856.70

2. Quote is valid for thirty days. Estimated Tax: $5,232.51

3. If modifications in materials, labor, or processing are required to meet new regulations, the pricing submitted herein is subject to immediate change. Total: $74,605.38

4. Freight allowed on single Sensus Product orders exceeding $80,000.00.

5. Net Thirty Days to Pay

6. Returned product may be subject to a 25% restocking fee. Additional details apply.

7. Sales Tax and/or Freight charges are not included.

1. All quotes are subject to the Aqua-Metric Terms of Sale unless there is an executed agreement between the parties.

Terms of Sale can be found online at www.aqua-metric.com

8. TAXES AND FEES. All prices quoted are exclusive of federal taxes, state taxes, municipal taxes, tariffs, duties, and other government-imposed fees (collectively the “Taxes and Fees”) related to the procurement, installation, and delivery of materials and equipment. Customer shall be liable for all applicable Taxes and Fees imposed upon the Goods purchased. Taxes and Fees will be added to each applicable invoice and are the responsibility of the Customer. If Customer is exempt from sales tax, Customer is required to provide all applicable tax exemption documentation at the time of purchase. Any changes in Taxes and Fees may result in adjustments to the final invoice accordingly.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 7 ends

DATA SHEET
WDS-10006-09
iPERL Smart Water Meter
Electromagnetic Flow Measurement System
Sensus iPERL ® smart water meters are designed to capture both lost water and lost revenue. The innovative magnetic technology delivers unmatched low ﬂow registration and minimal pressure loss. With no moving parts, iPERL maintains its accuracy over a 20 year lifetime and is equipped with smart water alarms – delivering the intelligence you need to quickly resolve issues in the ﬁeld.

Industry Leading Performance
The patented measurement technology of the iPERL water meter provides continuous and enhanced accuracy ranges at both low and high ﬂows and perpetual accuracy over the life of the product. The iPERL meter has a 20-year accuracy warranty and a 20- year battery life guarantee. Over this 20-year lifespan, your iPERL will measure just as accurately as the day it was installed.

Construction
The iPERL has a ﬂow tube that is comprised entirely of composite polymer, a thermal polymer shell, and an electronic register inside.

Electronic Register
The 9-digit hermetically-sealed electronic register with LCD display was designed to eliminate dirt, water, and moisture contamination in pit settings. The large, easy-to- read display includes AMI/AMR digits, direction of ﬂow, units of measure, and empty pipe detection. The AMI/AMR digits and units of measure are fully programmable. The register also provides user conﬁgurable data logging.

Solid State Electromagnetic Technology
By avoiding the use of a mechanical measuring element inside the ﬂow tube, metering performance is linear over the entire ﬂow range – ensuring no reduction in accuracy at any ﬂow rate over the life of the meter. The iPERL meter uses our patented remanent magnetic ﬁeld technology – requiring far less energy and delivering superior accuracy.

Tamperproof
The integrated construction of the iPERL water meter prevents removal of the register to obtain free water. The magnetic tamper and low ﬁeld alarms will both indicate any attempt to tamper with the magnetic ﬁeld of the iPERL meter. The meter communication alarm indicates a possible cut cable.

Alarms
Quick resolution of ﬁeld issues is made possible with smart water alarms including leak detection, reverse ﬂow, empty pipe, magnetic tamper and low battery. When integrated with our FlexNet
® communication network, remotely gathering and
transmitting data has never been more reliable or proﬁtable.

BENEFITS
Maximize investment with iPERL’s
electromagnetic technology, which
delivers a 20-year accuracy warranty, with
no required maintenance, and no loss in
accuracy over 20 years
Smart alarms detect issues such as leaks,
reverse ﬂow, empty pipe, etc.

Improve low ﬂow accuracy to drive
additional revenue

FEATURES
5/8” , 5/8” x 3/4” , 3/4” and 1” sizes
available in potable and reclaim versions
3/4” and 1” available in residential ﬁre
service (UL 327b)
Starts registering ﬂow as low as 0.03 gpm
(0.007 m³/hr)
Can be installed horizontally, vertically or
diagonally
Compatible with current Sensus AMI/
AMR systems
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 8 ends

PAGE 2
iPERL Smart Water Meter
Electromagnetic Flow Measurement System

SPECIFICATIONS
Service Measurement of potable and reclaim water, and Residential Fire Service (UL 327b). 0-100% humidity. Fully submersible. IP68+ rated.

Temperature Ranges Water operating:

Ambient air operating:

Storage air:
33 °F (0.55 °C) to 80 °F (26.7 °C)
-22 °F (-30 °C) to 140 °F (60 °C)
-30 °F (-34.4 °C) to 158 °F (70 °C)
Starting Flow 5/8” (DN 15 mm) size: 0.03
gpm (0.007 m³/h)
5/8” x 3/4” (DN 15x20 mm)
size: 0.03 gpm (0.007 m³/h)
3/4” (DN 20 mm) size: 0.03
gpm (0.007 m³/h)
1” (DN 25 mm) size: 0.11
gpm (0.025 m³/h)
Low Flow
Range (±3%)
5/8” (DN 15 mm) size: >0.10
gpm (0.025 m³/hr) to <0.18
gpm (0.041 m³/hr)
5/8” x 3/4” (DN 15 mm) size:
>0.10 gpm (0.025 m³/hr) to
<0.18 gpm (0.041 m³/hr)
3/4” (DN 20 mm) size: >0.10
gpm (0.025 m³/hr) to <0.18
gpm (0.041 m³/hr)
1” (DN 25 mm) size: >0.3
gpm (0.068 m³/hr) to <0.4
gpm (0.09 m³/hr)
Normal Water
Operating Flow
Range (±1.5%)
5/8” (DN 15 mm) size: 0.18 to
25 gpm (0.04 to 5.7 m³/hr)
5/8” x 3/4” (DN 15x20 mm)
size: 0.18 to 35 gpm (0.04 to

8.0 m³/hr)
3/4” (DN 20 mm) size: 0.18 to
35 gpm (0.04 to 8.0 m³/hr)
1” (DN 25 mm) size: 0.4 to 55
gpm (0.09 to 12.5 m³/hr)
Normal Test Flow
Limits (per UL 327b
Listing, at ±1.5%
accuracy)
3/4” (DN 20 mm) size:
2 to 30 gpm
(0.5 to 6.8 m³/hr)
1” (DN 25 mm) size:
2 to 50 gpm
(0.5 to 11.4 m³/hr)
Maximum Operating
Pressure
5/8’’, 5/8” x 3/4”, and 3/4’’ size: 200 psi (13.8 bar)
1’’ size: 175 psi (12.1 bar)
Maximum Operating
Pressure (per UL
327b Listing, at ±1.5%
accuracy)
3/4” and 1’’ size: 175 psi (12.1 bar)
Measurement
Technology
Solid state electromagnetic ﬂow
Register Hermetically sealed, 9-digit programmable electronic register Capacity 10,000,000 gallons, 1,000,000 cubic feet or 100,000 m ³ capacity Register Resolution .01 gallons/imperial gallons, .001 cubic foot, or .0001 m ³ Conformance to
Standards
Meets the requirements of NSF 61, Annex G and NSF 372.

Exceeds the most current revision of AWWA Standard C-715.

Materials External housing – Thermal polymer
Flowtube – Composite polymer or a bronze alloy
ﬂowtube with a composite polymer internal core
Electrode – Silver/silver chloride
Register cover – Hermetically sealed glass
Smart Alarms
iPERL meters have many conﬁgurable smart alarms designed to protect your utility’s investment, enhance customer service, and monitor/optimize distribution systems. These alarms include:

Empty Pipe
Detects the absence of water in the ﬂow tube and sends
an alert. Allows you to identify main breaks downstream and water shortages for quicker resolution to ensure
water availability. This alarm can also indicate the water meter has been removed from service, or notify you of
potential tamper.

Tampering
Detect magnetic interference to reduce apparent water
losses and protect against unauthorized activities.

Customer Leak
Detect continual consumption of water over a period
of time to indicate downstream leaks. This protects
your utility, infrastructure and customers through
alarm notiﬁcations that can reduce water loss and leak
adjustment costs.

Low Battery
Replace your meters before they stop recording
consumption through alerts indicating battery capacity to the meter or valve is running low.

Reverse Flow
Keep untreated water from re-entering your distribution system and deter tampering attempts through an alarm
triggered when reverse ﬂow is detected at the meter.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 9 ends

PAGE 3
iPERL Smart Water Meter
Electromagnetic Flow Measurement System
A
B
C
Sealed
Electronic
Register
Magnetic
Flow
Sensors Flowtube
Width
5 3/4 in.
(146 mm)

DIMENSIONS AND NET WEIGHTS
Meter Size A B C Spud Ends NPSM Thread Size Width Net Weight 5/8”
(DN 15 mm)
7-1/2”
(190 mm)
6-1/10”
(155mm)
1-3/4”
(44 mm)
5/8”
(15 mm)
3/4”
(20 mm)
4-1/2”
(114 mm)

3.1 lb.
(1.4 kg)
5/8” x 3/4”
(DN 15 mm x 20
mm)
7-1/2”
(190 mm)
6-1/10”
(155mm)
1-3/4”
(44 mm)
3/4”
(20 mm)
1”
(25 mm)
4-1/2”
(114 mm)

3.1 lb.
(1.4 kg)
3/4”Short
(DN 20 mm)
7-1/2”
(190 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
3/4”
(20 mm)
1”
(25 mm)
4-1/2”
(114 mm)

3.1 lb.
(1.4 kg)
3/4”
(DN 20 mm)
9”
(229 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
3/4”
(20 mm)
1”
(25 mm)
4-1/2”
(114 mm)

3.2 lb.
(1.45 kg)
1”
(DN 25 mm)
10-3/4”
(273 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
1”
(25 mm)
1-1/4”
(32 mm)
4-1/2”
(114 mm)

3.3 lb.
(1.5 kg)
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 10 ends

SENSUS | 639 Davis Drive | Morrisville, NC 27560 | 800.638.3748 ©2024 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT.

FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED.

Xylem.com | Sensus.com
iPERL Smart Water Meter
Electromagnetic Flow Measurement System
Head Loss Curves
0 1
2 3
4 5
6 7
8 9
10 11
12 0 5 10 15 20 25 30
Head Loss (psi)
Flow Rate (gpm)
5/8" iPERL
5/8" iPERL Head Loss (psi) AWWA Max Allowable Head Loss 0 1
2 3
4 5
6 7
8 9
10 11
12 0 5 10 15 20 25 30 35 40
Head Loss (psi)
Flow Rate (gpm)
5/8" x 3/4" and 3/4" Short iPERL
5/8 x 3/4" and 3/4" Short iPERL Head Loss (psi) AWWA Max Allowable Head Loss 0 1
2 3
4 5
6 7
8 9
10 11
12 0 5 10 15 20 25 30 35 40 45 50 55 60
Head Loss (psi)
Flow Rate (gpm)
1" iPERL
1" iPERL Head Loss (psi) AWWA Max Allowable Head Loss
0 1
2 3
4 5
6 7
8 9
10 11
12 0 5 10 15 20 25 30 35 40
Head Loss (psi)
Flow Rate (gpm)
3/4" iPERL
3/4" iPERL Head Loss (psi) AWWA Max Allowable Head Loss RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 11 ends

CONFORMANCE TO STANDARDS
The iPERL system far exceeds the most
recent revision of ANSI/AWWA Standard
C-700 and C-710 for accuracy and
pressure loss requirements. All iPERL
systems are NSF/ANSI Standard 61
Annex F and G compliant and tested to
AWWA standards. The iPERL meter is UL
(Underwriters Laboratories) Listed and
approved for use on fire protection and
domestic water applications.

PERFORMANCE
The patented measurement technology
of the iPERL system allows enhanced
accuracy ranges at both low and high
flows and perpetual accuracy over the
life of the product and can be installed
horizontally, vertically or diagonally.

CONSTRUCTION
The iPERL system is an integrated unit
that incorporates an electronic register
and measuring device encased in an
external housing. The measuring device
is comprised of a composite alloy
flowtube with externally-threaded spud
ends. Embedded in the flowtube are
magnetic flow sensors. The all electronic,
programmable register is hermetically
sealed with a tempered glass cover. The
iPERL system has a 20 year life cycle,
along with a 20 year battery life guarantee.

ELECTRONIC REGISTER
The high resolution 9-digit hermetically
sealed electronic register with LCD
display was designed to eliminate
dirt, lens fogging issues and moisture
contamination in pit settings with built in
tamper protection. The tempered glass
register cover displays readings with the
AMR digits highlighted. Direction of flow
and units of measure are also easily
readable on the register display. The
iPERL register features; AMR resolution
and unit of measure that are fully
programmable, integral customer data
logging compatible with UniPro software
tools. The large, easy to read display
also includes battery life, empty pipe and
forward/reverse flow indicators.

TAMPERPROOF FEATURES
The integrated construction of the iPERL
system prevents removal of the register to
obtain free water. The magnetic tamper
and low field alarms will both indicate any
attempt to tamper with the magnetic field
of the iPERL system.

AMR / AMI SYSTEMS
The iPERL systems are compatible with
current Sensus AMR/AMI systems.

Features
Description
UL Listed 3/4” (DN 20mm) and 1” (DN 25mm) Sizes
With no moving parts, the Sensus
iPERL water management system is
based on innovative electromagnetic
flow measurement technology. The
iPERL system family has an operating
range as low as 0.03 gpm (0.007 m
3/hr)
to 55 gpm (12.5 m3/hr).

WDS-10005-02
iPERL
TM
Water Management System Fire Service
Electromagnetic Flow Measurement System
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 12 ends

SERVICE Measurement of potable and reclaim water.

Operating temperature range of 33 oF (0.56 oC) - 150 oF (65.6 oC) NORMAL

OPERATING

FLOW RANGE
(±1.5%)
3/4” (DN 20mm) size: 0.18 to 35 gpm (0.04 to 8.0 m3/hr) 1” (DN 25mm) size: 0.4 to 55 gpm (0.09 to 12.5 m3/hr)

LOW FLOW
RANGE
(±3%)
3/4” (DN 20mm) size: >0.11 gpm (0.025 m3/hr) to <0.18 gpm (0.041 m3/hr) 1” (DN 25mm) size: >0.3 gpm (0.068 m3/hr) to <0.4 gpm (0.091 m3/hr) STARTING FLOW 3/4” (DN 20mm) size: 0.03 gpm (0.007 m3h) 1” (DN 25mm) size: 0.11 gpm (0.025 m3h)

MAXIMUM

OPERATING

PRESSURE
200 psi (13.6 bar)

MEASUREMENT
TECHNOLOGY Solid state electromagnetic flow
REGISTER Hermetically sealed, 9-digit programmable electronic register AMR/AMI compatible
iPERL system register programmable using the UniPro
programming package
MATERIALS External housing – Thermal plastic
Flowtube – Polyphenylene sulfide alloy
Electrode – Silver/silver chloride
Register cover – Tempered glass
ALARM

DEFAULTS
Alarm Duration – 90 days
Leak Duration – 24 hours
Datalog Interval – 1 hour
Alarm Mask – All alarms reported
History Mask – All event types reported
WDS-10005-01

Page 2 of 3 ends

SPECIFICATIONS

DIMENSIONS AND NET WEIGHTS
Size A
(lay length)
B C Spud Ends NPSM Thread
Size
Width Net Weight
3/4”S
(DN 20 mm)
7-1/2”
(190 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
3/4”
(20 mm)
1”
(25 mm)
4-1/2”
(114 mm)

3.1 lb.
(1.4 kg)
3/4”
(DN 20 mm)
9”
(229 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
3/4”
(20 mm)
1”
(25 mm)
4-1/2”
(114 mm)

3.2 lb.
(1.5 kg)
1”
(DN 25 mm)
10-3/4”
(273 mm)
6-1/10”
(155 mm)
1-3/4”
(44 mm)
1”
(25 mm)
1-1/4”
(32 mm)
4-1/2”
(114 mm)

3.3 lb.
(1.6 kg)
”
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 13 ends

8601 Six Forks Road, Suite 700
Raleigh, NC 27615
1-800-638-3748
www.sensus.com/water
© All products purchased and services performed are subject to Sensus’ terms of sale, available at either; http://na.sensus.com/TC/TermsConditions.pdf or 1-800-647-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer.

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED.

WDS-10005-01

Page 3 of 3 ends

HEADLOSS CURVES
1” Headloss Curve
3/4” Headloss Curve3/4” Short Headloss Curve
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 14 ends

DATA SHEET
WDS-10029-10
OMNI+ (R2) Water Meter
1-1/2” and 2”
The OMNI™+ R2 Water Water Meter operation is based on advanced Floating Ball Technology (FBT).

Performance
The patented measurement principles of the OMNI+ R2 meter ensure greater accuracy, expanded accuracy range and longer service life than any other comparable class meter. The OMNI+ R2 meter has no restrictions on sustained flow rates within its continuous range. The floating ball measurement technology allows installation in any orientation and flows up to maximum rated capacity without undue wear or accuracy degradation.

Construction
The OMNI+ R2 meter consists of two basic assemblies; the maincase and the measuring chamber. The measuring chamber assembly includes the “floating ball” impeller with a coated titanium shaft, hybrid axial bearings, integral flow straightener and an all electronic programmable register with protective bonnet. The maincase is made from industry proven Ductile Iron with an approved NSF epoxy coating.

Maincase features are; easily removable measuring chamber, unique chamber seal to the maincase using a high pressure o-ring, testing port and a convenient integral strainer.

OMNI+ Electronic Register
The OMNI+ electronic register is hermetically sealed with an electronic pickup containing no mechanical gearing. The OMNI+ register features a programmable totalizer registration, AMI/ AMR reading digits, and a resettable test totalizer. The large, easy-to-read LCD also displays both forward and reverse flow directions. The OMNI+ tamper-proof security cover can be positioned in any of 270 degrees of rotation, with indexing points at each of the 90-degree customary register viewing positions.

Magnetic Drive
Meter registration is achieved by utilizing a fully magnetic pickup system. This is accomplished by the magnetic actions of the embedded rotor magnets and the ultra sensitive register pickup probe. The only moving component in water is the “floating ball” impeller.

Measuring Element
The hydro-dynamically balanced impeller floats between the bearings. The Floating Ball Technology (FBT) allows the measuring element to operate virtually without friction or wear, thus creating the extended upper and lower flow ranges capable on only the OMNI+ R
2 meter.

OMNI™+ REGISTER DISPLAY
Conformance to Standards
The OMNI+ R2 meter meets and far
exceeds the most recent revision of ANSI/
AWWA Standard C701 class II standards
and exceeds performance criteria for
ANSI/AWWA C700 Residential Standard
using Sensus Turbo technology. Each
meter is performance tested to ensure
compliance. All OMNI meters are NSF/
ANSI Standard 61, Annex F and G
approved.

Totalizer ViewSegment Test View
Flow Rate ViewNotification View
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 15 ends

PAGE 2
OMNI+ (R2) Water Meter
1-1/2” and 2”
Strainer
The OMNI+ R2 with the “V” shaped strainer uses a stainless steel screen along with Floating Ball Technology (FBT). This creates a design that greatly improves accuracy, even in difficult settings.

A removable strainer cover permits easy access to the screen for routine maintenance.

AMR/AMI Systems
Meters and Electronic Registers are compatible with current Sensus AMR/AMI systems and other AMI communication
systems that use the Sensus UI1203 protocol.

Maintenance
The OMNI+ R2 meter is designed for easy maintenance. Should any maintenance be required, the measuring chamber and/ or strainer cover can be removed independently. Replacement parts or complete measuring chambers are available for
repairs. OMNI+ R
2 replacement measuring chambers may
also be utilized to upgrade some third-party meters to achieve increased accuracy and extended service life.

Data Logging
The OMNI+ R² meter logs 180 days of hourly consumption data.

OMNI R2: 2”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer Screen Maincase R 2 Rotor
Strainer
Cover
Register with AMR
Test
Plug
Measuring
Chamber
Assembly
OMNI R2: 1-1/2”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase T
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 16 ends

PAGE 3
OMNI+ (R2) Water Meter
1-1/2” and 2”
OMNI R2: 2” Without Strainer
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
B
Maincase R 2 Rotor
Register
with AMR
Measuring
Chamber
Assembly
C

SPECIFICATIONS
Service Measurement of potable and reclaim water.

IP68 Rated.

Storage temperature: -22 °F (-30 °C) to 155 °F (68.3 °C) Operating temperatures:

Air: -22 °F (-30 °C) to 150 °F (65.6 °C)
Water: 33 °F (0.6 °C) to 80 °F (26.7 °C)
Operating Range
(100% ± 1.5%)
1-1/2”: 2 – 150 gpm (0.45 - 34 m³/hr) 2”: 2.5 – 200 gpm (0.56 – 45 m³/hr) 2” without strainer: 2.5 – 200 gpm (0.56 – 45 m³/hr)
Low flow
(95% – 101.5%)
1-1/2”: 0.75 gpm (0.17 m
3/hr) 2”: 1.0 gpm (0.23 m³/hr)
2” without strainer: 1.0 gpm (0.23 m³/hr)
Maximum Continuous
Operation
1-1/2”: 120 gpm (27 m³/hr) 2”: 160 gpm (36 m³/hr)
2” without strainer: 200 gpm (45 m
3/hr)
Maximum Intermittent
Operation
1-1/2”: 200 gpm (45 m
3/hr) 2”: 250 gpm (57 m3/hr)
Pressure Loss 1-1/2”: 6.9 psi @ 160 gpm (0.48 bar @ 36 m³/hr) 2”: 7.0 psi @ 200 gpm (0.48 bar @ 45 m3/hr) Maximum
Operating Pressure
200 psi (13.8 bar)
Flange Connections U.S. ANSI B16.1 / AWWA Class 125
Register Fully electronic sealed register with programmable registration
(Gal. / Cu. Ft. / Cu. Mtr. / Imp. Gal. / Acre Ft.)
Programmable AMR/AMI reading
Guaranteed 10-year battery life
NSF Approved Materials
Maincase: C oated Ductile Iron
Measuring Chamber: T hermoplastic
Rotor “Floating Ball”: T hermoplastic
Radial Bearings: H ybrid Thermoplastic
Thrust Bearings: S apphire/Ceramic Jewel
Magnets: Ceramic
Strainer Screen: S tainless Steel
Strainer Cover: C oated Ductile Iron

DIMENSIONS AND NET WEIGHTS
Meter and
Pipe Size
Normal
Operating Range Connections A B C D E F G H J Net
Weight
Shipping
Weight
1-1/2”
DN 40 mm
2 gpm

0.45 m3/hr
150 gpm
34 m3/hr Flanged 13”
330 mm
8-1/2”
216 mm
15/16”
24mm
5-7/16”
138 mm
2-5/16”
59 mm
4”
102 mm 2 5/8”
16 mm
1”
25 mm

18.8 lb

8.53 kg

22.5 lb

10.2 kg
2”
DN 50 mm

2.5 gpm

0.57 m3/hr
200 gpm
45 m3/hr Flanged 17”
432 mm
8-1/2”
216 mm
1”
25 mm
5-3/4”
146 mm
2-5/16”
59 mm
4-1/2”
114 mm 2 5/8”
16 mm
1-1/2”
38 mm

27.4 lb

12.4 kg

34.5 lb

15.6 kg
2” without
Strainer
DN 80 mm

2.5 gpm

0.57 m3/hr
250 gpm
57 m3/hr Flanged 10”
254 mm
8-1/2”
216 mm
1” 25
mm
5-3/4”
146 mm
2-5/16”
59 mm
4-1/2”
114 mm 2 5/8”
16 mm N/A 17 lb

7.9 kg

24.5 lb

11.1 kg
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 17 ends

SENSUS | 637 Davis Drive | Morrisville, NC 27560 | 800.638.3748 ©2023 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT.

Xylem.com | Sensus.com
OMNI+ (R2) Water Meter
1-1/2” and 2”
Headloss Curves
95 97
96 98
99 100
101
102

1.5" R2 Accuracy Curve
0 .75 1.25 71 53 05 08 0 100 160 200
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)

1.5" R2 Pressure Loss Curve with Strainer
0 .75 1.25 71 53 05 08 0 100 160 200
Rate of Flow (GPM)
Pressure Loss (PSI)0
4 2
6 8
10 12
14 95
97 96
98 99
100
101
102
2" R2 Accuracy Curve
0 1.0 1.5 71 53 05 08 0 100 200 250
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
2" R2 Pressure Loss Curve with Strainer
0 1.0 1.5 71 53 05 08 0 100 200 250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
2" R2 Pressure Loss Curve without Strainer
0 1.0 1.5 71 53 05 08 0 100 200 250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 18 ends

DATA SHEET
WDS-10018-06
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
The OMNI™+ T² meter operation is based on advanced Floating Ball Technology (FBT).

Performance
The patented measurement principles of the OMNI+ T² meter ensure greater accuracy, expanded accuracy range and longer service life than any other comparable class meter. The OMNI+ T² meter has no restrictions on sustained flow rates within its continuous range. The floating ball measurement technology allows installation in any orientation and flows up to maximum rated capacity without undue wear or accuracy degradation.

Construction
The OMNI+ T² meter consists of two basic assemblies; the maincase and the measuring chamber. The measuring chamber assembly includes the “floating ball” impeller with a coated titanium shaft, hybrid axial bearings, integral flow straightener and an all electronic programmable register with protective bonnet. The maincase is made from industry proven Ductile Iron with an approved NSF epoxy coating.

Maincase features are; easily removable measuring chamber, unique chamber seal to the maincase using a high pressure o-ring, testing port and a convenient integral strainer.

OMNI+ Electronic Register
The OMNI+ electronic register is hermetically sealed with an electronic pickup containing no mechanical gearing. The OMNI+ register features a programmable totalizer registration, an optional digital pulse signal, AMI/ AMR reading digits, and a resettable test totalizer. The large, easy-to-read LCD also displays both forward and reverse flow directions. The OMNI+ tamper-proof security cover can be positioned in any of 270 degrees of rotation, with indexing points at each of the 90-degree customary register viewing positions.

OMNI™+ REGISTER DISPLAY
Conformance to Standards
The OMNI+ T² meter meets and far
exceeds the most recent revision of
AWWA Standard C701 class II standards.

Each meter is performance tested to
ensure compliance. All OMNI meters are
NSF/ANSI Standard 61, Annex F and G
approved.

Totalizer ViewSegment Test View
Flow Rate ViewNotification View
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 19 ends

PAGE 2
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
OMNI T²: 1-1/2”
OMNI T²: 2”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase T
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase T
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
Strainer
The OMNI+ T² with the AWWA compliant “V” shaped strainer uses a stainless steel screen along with Floating Ball Technology (FBT). This creates a design that greatly improves accuracy, even in difficult settings. A removable strainer cover permits easy access to the screen for routine maintenance.

AMR/AMI Systems
Meters and Electronic Registers are compatible with current Sensus AMR/AMI systems and other AMI communication
systems that use the Sensus UI1203 protocol.

Maintenance
The OMNI+ T² meter is designed for easy maintenance. Should any maintenance be required, the measuring chamber and/ or strainer cover can be removed independently. Replacement parts or complete measuring chambers are available for
repairs. OMNI+ T² replacement measuring chambers may also be utilized to upgrade some third-party meters to achieve increased accuracy and extended service life.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 20 ends

PAGE 3
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
OMNI T²: 3” - 6”
OMNI T²: 8” - 10”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase T
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer Screen
Maincase T 2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly

DIMENSIONS AND NET WEIGHTS
Meter and
Pipe Size
Normal
Operating Range Connections A B C D E F G H J Net
Weight
Shipping
Weight
1-1/2” DN
40mm

1.25 gpm
.28 m3/hr
200 gpm
45 m3/hr Flanged 13”
330mm
7-7/8”
200mm
15/16”
24mm
5-7/16”
138mm
2-5/16”
59mm
4”
102mm 2 5/8”
16mm
1”
25mm

18.8 lbs.

8.53 kg.

22.5 lbs.

10.2 kg.
2” DN
50mm

1.5 gpm
.34 m3/hr
250 gpm
57 m3/hr Flanged 17”
432mm
7-7/8”
200mm
1”
25mm
5-3/4”
146mm
2-5/16”
59mm
4-1/2”
114mm 2 3/4”
19mm
1-1/2”
38mm

27.4 lbs.

12.4 kg.

34.5 lbs.

15.6 kg.
2” w/o
Strainer
DN 50mm

1.5 gpm
.34 m3/hr
250 gpm
57 m3/hr Flanged 10”
254mm
7-7/8”
200mm
1”
25mm
5-3/4”
146mm
2-5/16”
59mm
4-1/2”
114mm 2 3/4”
19mm N/A 17.4 lbs.

7.9 kg.

24.5 lbs.

11.1 kg.
3” DN
80mm

2.5 gpm
.57 m3/hr
650 gpm
148 m3/hr Flanged 19”
483mm
8-3/4”
225mm
3/4”
19mm
7-7/8”
200mm
4-1/8”
105mm
6”
153mm 4 5/8”
16mm
2”
51mm

48.5 lbs.

22.0 kg.

57.4 lbs.

26.0 kg.
4” DN
100mm

3.0 gpm
.68 m3/hr
1250 gpm
284 m3/hr Flanged
23”
584mm
11-
3/16”
284mm
15/16”
24mm
9-1/8”
232mm
4-3/4”
121mm
7-1/2”
191mm 8
5/8”
16mm
2”
51mm

67.9 lbs.

30.8 kg.

75.8 lbs.

34.4 kg.
6” DN
150mm
4 gpm
.91 m3/hr
2500 gpm
568 m3/hr Flanged 27”
686mm
13-1/4”
337mm
15/16”
24mm
11”
279mm
5-3/4”
146mm
9-1/2”
241mm 8 3/4”
19mm
2”
51mm
140 lbs.

63.5 kg.
165 lbs.

74.8 kg.
8” DN
200mm
5 gpm

1.1 m3/hr
3500 gpm
795 m3/hr Flanged 30-1/8”
765mm
15”
381mm
11/16”
17mm
13-1/2”
343mm
6-3/4”
171mm
11-3/4”
298mm 8 3/4”
19mm
2”
51mm
471 lbs.
214 kg.
521 lbs.
236 kg.
10” DN
250mm
6 gpm

1.4 m3/hr
5500 gpm
1249 m3/hr Flanged 41-1/8”
1045mm
19”
483mm
11/16”
17mm
16”
406mm
8-1/2”
216mm
14-1/4”
362mm 12 7/8”
22mm
2”
51mm
685 lbs.
311 kg.
745 lbs.
338 kg.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 21 ends

PAGE 4
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”

SPECIFICATIONS
Service Measurement of potable and reclaim water.

Storage temperature:
-22F (-30C) to 155F (68.3C)
Operating temperatures:

Air: -22F (-30C) to 150F (65.6C)
Water: 33F (0.6C) to 80F (26.7)
Operating
Range
(100% ± 1.5%)
1-1/2”: 1.25 – 200 GPM (0.28 - 45 m
3/hr)
2”: 1.5 – 250 GPM (0.34 - 57 m3/hr)
3”: 2.5 – 650 GPM (0.57 - 148 m3/hr)
4”: 3 – 1250 GPM (0.68 - 284 m3/hr)
6”: 4 – 2500 GPM (0.91 - 568 m3/hr)
8”: 5 – 3500 GPM (1.1 - 795 m3/hr)
10”: 6 – 5500 GPM (1.4 - 1249 m3/hr)
Low flow
(95% – 101.5%)
1-1/2”: 0.75 GPM (0.17 m3/hr)
2”: 1.0 GPM (0.23 m3/hr)
3”: 1.5 GPM (0.34 m3/hr)
4”: 2.0 GPM (0.45 m3/hr)
6”: 2.5 GPM (0.57 m3/hr)
8”: 4 GPM (0.91 m3/hr)
10”: 5 GPM (1.1 m3/hr)
Maximum
Continuous
Operation
1-1/2”: 160 GPM (36 m
3/hr)
2”: 200 GPM (45 m3/hr)
3”: 500 GPM (114 m3/hr)
4”: 1000 GPM (227 m3/hr)
6”: 2000 GPM (454 m3/hr)
8”: 3500 GPM (795 m3/hr)
10”: 5500 GPM (1249 m3/hr)
Maximum
Intermittent
Operation
1-1/2”: 200 GPM (45 m
3/hr)
2”: 250 GPM (57 m3/hr)
3”: 650 GPM (148 m3/hr)
4”: 1250 GPM (284 m3/hr)
6”: 2500 GPM (568 m3/hr)
8”: 4700 GPM (1067 m3/hr)
10”: 7000 GPM (1590 m3/hr)
Pressure Loss 1-1/2”: 6.9 psi @ 160 GPM (0.48 bar @ 36 m3/hr) 2”: 7.0 psi @ 200 GPM (0.48 bar @ 45 m
3/hr)
3”: 5.1 psi @ 500 GPM (0.35 bar @ 114 m3/hr)
4”: 8.7 psi @ 1000 GPM (0.60 bar @ 227 m3/hr)
6”: 8.2 psi @ 2000 GPM (0.57 bar @ 454 m 3/hr)
8”: 5.1 psi @ 3500 GPM (0.35 bar @ 795 m3/hr)
10”: 7.2 psi @ 5500 GPM (0.50 bar @ 1249 m3/hr)
Maximum
Operating Pressure
200 PSI (13.8 bar)
Flange Connections U.S. ANSI B16.1 / AWWA Class 125
Test Ports NPT
Register Fully electronic sealed register with programmable registration
(Gal. /Cu.Ft./ Cu. Mtr. / Imp. Gal. / Acre Ft.)
Programmable AMR/AMI reading and pulse outputs
Guaranteed 10-year battery life
NSF Approved
Materials
Maincase: C oated Ductile Iron
Measuring Chamber: T hermoplastic
Rotor “Floating Ball”: T hermoplastic
Radial Bearings: H ybrid Thermoplastic
Thrust Bearings: S apphire/Ceramic Jewel
Magnets: Ceramic
Strainer Screen: S tainless Steel
Strainer Cover: C oated Ductile Iron
Test Plug: S tainless Steel
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 22 ends

PAGE 5
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
Headloss Curves

1.5" T2 Pressure Loss Curve with Strainer
0 .75 1.25 71 53 05 08 0 100 160 200
Rate of Flow (GPM)
Pressure Loss (PSI)0
4 2
6 8
10 12
14 2" T2 Pressure Loss Curve with Strainer
0 1.0 1.5 71 53 05 08 0 100 200 250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
2" T2 Pressure Loss Curve without Strainer
0 1.0 1.5 71 53 05 08 0 100 200 250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
Pressure Loss Curve with Strainer
4" T2 Pressure Loss Curve with Strainer
01 05 0 100 200 300 600 1000 1250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
95 97
96 98
99 100
101
102

1.5" T2 Accuracy Curve
0 .75 1.25 71 53 05 08 0 100 160 200
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
2" T2 Accuracy Curve
0 1.0 1.5 71 53 05 08 0 100 200 250
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
3" T2 Accuracy Curve
0 1.5 2.5 10 50 100 200 300 400 500 650
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
4" T2 Accuracy Curve
0 2.0 3.0 10 50 100 200 300 600 1000 1250
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 23 ends

SENSUS | 637 Davis Drive | Morrisville, NC 27560 | 800.638.3748 ©2021 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT.

Xylem.com | Sensus.com
OMNI+ Turbo (T²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
Headloss Curves
10" T2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 2000 5500 2500
Rate of Flow (GPM)
0 3
1 5
7 8
10 12
Pressure Loss (PSI) 4500
6" T2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 1500 2000 2500
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
8" T2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 2000 3500 2500
Rate of Flow (GPM)
0 2
1 3
4 5
6 7
Pressure Loss (PSI)
95 97
96 98
99 100
101
102
10" T2 Accuracy Curve
0 3 6 25 50 100 500 1000 2500 5500 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
4500
95 97
96 98
99 100
101
102
6" T2 Accuracy Curve
0 2.5 4.0 25 50 100 500 1000 1500 2000 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
8" T2 Accuracy Curve
0 4 5 25 50 100 500 1000 2000 3500 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 24 ends

DATA SHEET
WDS-10017-07
OMNI+ Compound (C²) Water
Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
The OMNI™+ Compound (C²) Water Meter operation is based on advanced Floating Ball Technology (FBT).

Performance
The patented measurement principles of the OMNI+ C² meter ensure greater accuracy, expanded accuracy range and longer service life than any other comparable class meter. The OMNI+ C² meter has no restrictions on sustained flow rates within its continuous range. The floating ball measurement technology allows installation in any orientation and flows up to maximum rated capacity without undue wear or accuracy degradation.

Construction
The OMNI+ C² meter consists of two basic assemblies; the maincase and the measuring chamber. The measuring chamber assembly includes the “floating ball” impeller with a coated titanium shaft, hybrid axial bearings, integral flow straightener and an all electronic programmable register with protective bonnet. The maincase is made from industry proven Ductile Iron with an approved NSF epoxy coating.

Maincase features are; easily removable measuring chamber, unique chamber seal to the maincase using a high pressure o-ring, testing port and an AWWA compliant strainer.

OMNI+ Electronic Register
The OMNI+ electronic register is hermetically sealed with an electronic pickup containing no mechanical gearing. The OMNI+ register features a programmable totalizer registration, an optional digital pulse signal, AMI/ AMR reading digits, and a resettable test totalizer. The large, easy-to-read LCD also displays both forward and reverse flow directions. The OMNI+ tamper-proof security cover can be positioned in any of 270 degrees of rotation, with indexing points at each of the 90-degree customary register viewing positions.

Totalizer ViewSegment Test View
Flow Rate View
OMNI™+ REGISTER DISPLAY
Notification View
Conformance to Standards
The OMNI+ C2 meter meets and far
exceeds the most recent revision of
AWWA Standard C701 and C702 class
II. Additionally, the meter does not
require a valve to meet these standards.

Each meter is performance tested to
ensure compliance. All OMNI meters are
NSF/ANSI Standard 61, Annex F and G
approved latest standards.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 25 ends

PAGE 2
OMNI+ Compound (C²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
Strainer
The OMNI+ C² with the AWWA compliant “V” shaped strainer uses a stainless steel screen along with Floating Ball Technology (FBT). This creates a design that greatly improves accuracy, even in difficult settings. A removable strainer cover permits easy access to the screen for routine maintenance.

AMR/AMI Systems
Meters and Electronic Registers are compatible with current Sensus AMR/AMI systems and other AMI communication
systems that use the Sensus UI1203 protocol.

Maintenance
The OMNI+ C² meter is designed for easy maintenance. Should any maintenance be required, the measuring chamber and/ or strainer cover can be removed independently. Replacement parts or complete measuring chambers are available for
repairs. OMNI+ C² replacement measuring chambers may
also be utilized to upgrade some third-party meters to achieve increased accuracy and extended service life.

OMNI C²: 1-1/2”
OMNI C²: 2”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase C
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase C
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 26 ends

PAGE 3
OMNI+ Compound (C²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
OMNI C²: 3” - 6”
OMNI C²: 8” - 10”
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer
Screen Maincase C
2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly
E
D
F – Bolt Circle
G – No. of Bolts
H – Size of Bolts
Direction
of Flow
A
C
B
J
Strainer Screen
Maincase C 2 Rotor
Strainer
Cover
Register with
Pulse and AMR
Test
Plug
Measuring
Chamber
Assembly

DIMENSIONS AND NET WEIGHTS
Meter
and Pipe
Size
Normal
Operating Range Connections A B C D E F G H J Net
Weight
Shipping
Weight
1-1/2” DN
40mm
.5 gpm
.11 m3/hr
200 gpm
45 m3/hr Flanged 13”
330mm
7-7/8”
200mm
15/16”
24mm
5-7/16”
138mm
2-5/16”
59mm
4”
102mm 2 5/8”
16mm
1”
25mm

18.8 lbs.

8.53 kg.

22.5 lbs.

10.20 kg.
2” DN
50mm
.5 gpm
.11 m3/hr
200 gpm
45 m3/hr Flanged 15-1/4”
387mm
7-7/8”
200mm
1”
25mm
5-3/4”
146mm
2-5/16”
59mm
4-1/2”
114mm 2 3/4”
19mm
1”
25mm

25.4 lbs.

11.5 kg.

32.5 lbs.

14.74 kg.
3” DN
80mm
1 gpm
.23 m3/hr
500 gpm
114 m3/hr Flanged 17”
432mm
8-3/4”
225mm
3/4”
19mm
7-7/8”
200mm
4-1/8”
105mm
6”
152mm 4 5/8”
16mm
1”
25mm
45 lbs.

20.41 kg.

48.0 lbs.

21.8 kg.
4” DN
100mm

1.5 gpm
.34 m3/hr
1000 gpm
227 m3/hr Flanged 20”
508mm
11-3/16”
284mm
15/16”
24mm
9-1/8”
232mm
4-3/4”
121mm
7-1/2”
191mm 8 5/8”
16mm
1-1/2”
38mm

64.9 lbs.

29.44 kg.

72.8 lbs.

33.02 kg.
6” DN
150mm
3 gpm
.68 m3/hr
2000 gpm
454 m3/hr Flanged 24”
610mm
13-1/4”
337mm
15/16”
24mm
11”
279mm
5-3/4”
146mm
9-1/2”
241mm 8 3/4”
19mm
1-1/2”
38mm
130 lbs.

59.0 kg.
155 lbs.

70.3 kg.
8” DN
200mm
4 gpm
.91 m3/hr
2700 gpm
614 m3/hr Flanged 30-1/8”
765mm
15”
381mm
11/16”
17mm
13-1/2”
343mm
6-3/4”
172mm
11-3/4”
298mm 8 3/4”
19mm
2”
51mm
471 lbs.
214 kg.
521 lbs.
236 kg.
10” DN
250mm
5 gpm

1.1 m3/hr
4000 gpm
908 m3/hr Flanged 41-1/8”
1045mm
19”
483mm
11/16”
17mm
16”
406mm
8-1/2”
216mm
14-1/4”
362mm 12 7/8”
22mm
2”
51mm
685 lbs.
311 kg.
745 lbs.
338 kg.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 27 ends

PAGE 4
OMNI+ Compound (C²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”

SPECIFICATIONS
Service Measurement of potable and reclaim water.

Storage temperature:
-22F (-30C) to 155F (68.3C)
Operating temperatures:

Air: -22F (-30C) to 150F (65.6C)
Water: 33F (0.6C) to 80F (26.7C)
Operating
Range
(100% ± 1.5%)
1-1/2”: 0.5 – 200 GPM (0.11 - 45 m3/hr)
2”: 0.5 – 200 GPM (0.11 - 45 m3/hr)
3”: 1.0 – 500 GPM (0.23 - 114 m3/hr)
4”: 1.5 – 1000 GPM (0.34 - 227 m3/hr)
6”: 3 – 2000 GPM (0.68 - 454 m3/hr)
8”: 4 – 2700 GPM (0.91 - 614 m3/hr)
10”: 5 – 4000 GPM (1.1 - 908 m3/hr)
Low flow
(95% – 101.5%)
1-1/2”: 0.25 GPM (.06 m3/hr)
2”: 0.25 GPM (.06 m3/hr)
3”: 0.5 GPM (0.11 m3/hr)
4”: 0.75 GPM (0.17 m3/hr)
6”: 1.5 GPM (0.34 m3/hr)
8”: 2.5 GPM (0.57 m3/hr)
10”: 3.5 GPM (0.8 m3/hr)
Maximum
Continuous
Operation
1-1/2”: 160 GPM (36 m3/hr)
2”: 160 GPM (36 m3/hr)
3”: 400 GPM (91 m3/hr)
4”: 800 GPM (182 m3/hr)
6”: 1600 GPM (363 m3/hr)
8”: 2700 GPM (614 m3/hr)
10”: 4000 GPM (908 m3/hr)
Maximum
Intermittent
Operation
1-1/2”: 200 GPM (45 m3/hr)
2”: 200 GPM (45 m3/hr)
3”: 500 GPM (114 m3/hr)
4”: 1000 GPM (227 m3/hr)
6”: 2000 GPM (454 m3/hr)
8”: 3400 GPM (773 m3/hr)
10”: 5000 GPM (1136 m3/hr)
Pressure Loss 1-1/2”: 6.9 psi @ 160 GPM (0.48 bar @ 36 m3/hr) 2”: 4.3 psi @ 160 GPM (0.30 bar @ 36 m3/hr)
3”: 3.2 psi @ 400 GPM (0.22 bar @ 91 m3/hr)
4”: 6.4 psi @ 800 GPM (0.44 bar @ 182 m3/hr)
6”: 5.5 psi @ 1600 GPM (0.38 bar @ 363 m3/hr)
8”: 4 psi @ 2700 GPM (0.28 bar @ 614 m3/hr)
10”: 4.5 psi @ 4000 GPM (0.31 bar @ 908 m3/hr)
Maximum
Operating Pressure
200 PSI (13.8 bar)
Flange Connections U.S. ANSI B16.1 / AWWA Class 125
Test Ports NPT
Register Fully electronic sealed register with
programmable registration
(Gal. /Cu.Ft./ Cu. Mtr. / Imp. Gal. / Acre Ft.)
Programmable AMR/AMI reading and
pulse outputs
Guaranteed 10-year battery life
NSF Approved
Materials
Maincase: C oated Ductile Iron
Measuring Chamber: T hermoplastic
Rotor “Floating Ball”: T hermoplastic
Radial Bearings: H ybrid Thermoplastic
Thrust Bearings: S apphire/Ceramic Jewel
Magnets: Ceramic
Strainer Screen: S tainless Steel
Strainer Cover: C oated Ductile Iron
Test Plug: S tainless Steel
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 28 ends

PAGE 5
OMNI+ Compound (C²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
Headloss Curves
3" C2 Pressure Loss Curve with Strainer

1.5" C2 Pressure Loss Curve with Strainer
0 .5 1.5 200 200
Rate of Flow (GPM)
Pressure Loss (PSI)0
4 2
6 8
10 12
14 9 80 13030
2" C2 Pressure Loss Curve with Strainer
0 1.0 1.5 71 53 05 08 0 100 200 250
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
4" C2 Pressure Loss Curve with Strainer
01 05 0 100 200 300 600 1000
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
6" C2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 1500 2000 2500
Rate of Flow (GPM)
0 4
2 6
8 10
12 14
Pressure Loss (PSI)
95 97
96 98
99 100
101
102

1.5" C2 Accuracy Curve
0 .25 1 71 53 05 08 0 100 160 200
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
2" C2 Accuracy Curve
0 .25 1 71 53 05 08 0 100 160 200
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
3" C2 Accuracy Curve
0 .5 1.0 10 50 100 200 300 400 500 650
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
4" C2 Accuracy Curve
0 1 1.5 10 50 100 200 300 600 1000 1250
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
6" C2 Accuracy Curve
0 1.5 3.0 25 50 100 500 1000 1500 2000 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 29 ends

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT.

Xylem.com | Sensus.com
OMNI+ Compound (C²) Water Meter
1-1/2” , 2” , 3” , 4” , 6” , 8” and 10”
Headloss Curves
8" C2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 2000 3000 2500
Rate of Flow (GPM)
0 2
1 3
4 5
6 7
Pressure Loss (PSI)
10" C2 Pressure Loss Curve with Strainer
02 55 0 100 500 1000 2000 4000 2500
Rate of Flow (GPM)
0 3
2 4
5 6
6 7
Pressure Loss (PSI) 3000
95 97
96 98
99 100
101
102
8" C2 Accuracy Curve
0 3 6 25 50 100 500 1000 2000 3000 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
95 97
96 98
99 100
101
102
10" C2 Accuracy Curve
0 3 6 25 50 100 500 1000 2000 4000 2500
101.5

98.5 Rate of Flow (GPM)
Accuracy (%)
3000
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 30 ends

DATA SHEET
WDS-10063-01
Cordonel®
Ultrasonic C&I water meter
Cordonel® is an innovative ultrasonic C&I water meter with patented flow technology that measures low- to high-volume flow with unmatched accuracy. Equipped with pressure and temperature sensing, alarms, and data storage, it fills a critical need in commercial, industrial, and irrigation markets.

Superior accuracy
Cordonel’s patented flow rate technology ensures that every drop of water passes through one of its three individual measuring paths. Cordonel’s horizontal and vertical pipe orientations means no straight upstream and downstream pipe requirements; measurements are accurate even behind a 90-degree bend. With solid-state ultrasonic engineering and reliable readings over its 20-year battery life, Cordonel delivers accuracy unmatched in the industry.

Applications
AMI and AMR output for Smart Water Networks
Measurement for billing of potable water up to 122 °F (50 °C) High flow such as irrigation
Low flow such as light load periods
Leak detection
Control of industrial processes using a pulse output
Supply of rich data for DMA analysis

BENEFITS
Maintenance free over its operational
lifetime
Constant accuracy over lifetime, no
degradation as components age
Secure encrypted data transmission
20-year average meter lifetime incl.
battery under standard usage conditions

FEATURES
Advanced U0D0 capability - zero straight
pipe requirements
Installation in horizontal and vertical pipe
orientations
LCD for consumption, flow, temperature,
pressure (optional) and status
information
NFC wireless interface for readout of the
last volume reading
Optional pulse output with
programmable values and lengths
Alarm is triggered
Low battery level is reached
System is set up in hydraulic testing mode
Indicates positive or negative flow
TST
Display
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 31 ends

PAGE 2
Cordonel®
Ultrasonic C&I water meter

DIMENSIONS AND NET WEIGHTS
Size L
(lay length)
B
(width) H (Height) h
(Height to pipe axis) Net Weight (kg)

1.5”
(DN 40 mm)
13”
330mm

6.22”
158mm

9.6”
244mm

3.15”
80mm

11.4 2”
(DN 50 mm)
10”
254mm

6.22”
158mm

9.6”
244mm

3.15”
80mm

10.8 15.25”
387mm

6.22”
158mm

9.6”
244mm

3.15”
80mm

12.6 17”
432mm

6.22”
158mm

9.6”
244mm

3.15”
80mm

13.1 3”
(DN 80 mm)
17”
432mm

7.87”
200mm

10.8”
275mm

3.74”
95mm

23.8 19”
483mm

7.87”
200mm

10.8”
275mm

3.74”
95mm

24.9 4”
(DN 100 mm)
20”
508mm
9”
229mm

12.2”
310mm

4.37”
111mm

34.0 23”
584mm
9”
229mm

12.2”
310mm

4.37”
111mm

36.2 RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 32 ends

PAGE 3
Cordonel®
Ultrasonic C&I water meter

SPECIFICATIONS
Service Measurement of potable and reclaim water.

Temperature Ranges Water operating:

Ambient air operating:

Storage air:
33 °F (0.55 °C) to 122 °F (50 °C)
-22 °F (-30 °C) to 140 °F (60 °C)
-30 °F (-34.4 °C) to 158 °F (70 °C)
Starting Flow 1-1/2” (DN 40 mm) size:

0.05 gpm (0.012 m3/h)
2” (DN 50 mm) size:

0.05 gpm (0.012 m3/h)
3” (DN 80 mm) size:

0.15 gpm (0.033 m3/h)
4” (DN 100 mm) size:

0.24 gpm (0.054 m3/h)
Low Flow (±3%) 1-1/2” (DN 40 mm) size:

0.18 gpm (0.04 m3/hr)
2” (DN 50 mm) size:

0.18 gpm (0.04 m3/hr)
3” (DN 80 mm) size:

0.44 gpm (0.10 m3/hr)
4” (DN 100 mm) size:

0.70 gpm (0.16m3/hr)
Normal Water
Operating Flow
Range (±1.5%)
1-1/2” (DN 40 mm) size:

0.26 to 176 gpm (0.06 to 40
m3/hr)
2” (DN 50 mm) size:

0.26 to 176 gpm (0.06 to 40
m3/hr)
3” (DN 80 mm) size:

0.70 to 440 gpm (0.16 to 100
m3/hr)
4” (DN 100 mm) size:

1.14 to 704 gpm (0.26 to 160
m3/hr)
Maximum
Continuous
Operation
1-1/2” (DN 40 mm) size:
220 gpm (50 m3/hr)
2” (DN 50 mm) size:
220 gpm (50 m3/hr)
3” (DN 80 mm) size:
550 gpm (125 m3/hr)
4” (DN 100 mm) size:
881 gpm (200 m3/hr)
Maximum
Intermittent
Operation
1-1/2” (DN 40 mm) size:
343 gpm (78 m3/hr)
2” (DN 50 mm) size:
396 gpm (90 m3/hr)
3” (DN 80 mm) size:
881 gpm (200 m3/hr)
4” (DN 100 mm) size:
1365 gpm (310 m3/hr)
Maximum Operating
Pressure
200 PSI (13.8 bar)
Register Fully electronic sealed register with programmable registration
(Gal. /Cu.Ft./ Cu. Mtr. / Imp. Gal. / Acre Ft.) Programmable AMR/AMI reading and pulse outputs
Guaranteed 20-year battery life
Access Port NPT
Flange Connections U.S. ANSI B16.1 / AWWA Class 125
Materials Maincase – Epoxy coated ductile iron
Measuring Transducers – High grade polymer
Inner tube - High grade polymer; stainless steel
Battery – Lithium
Gaskets – EPDM
Other materials - Glass fiber reinforced polymer; stainless steel
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 33 ends

SENSUS | 637 Davis Drive | Morrisville, NC 27560 | 800.638.3748 ©2022 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.

This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT.

Xylem.com | Sensus.com
Cordonel®
Ultrasonic C&I water meter
Smart Alarms
Cordonel meters have many configurable smart alarms designed to protect your utility’s investment, enhance customer service, and monitor/optimize distribution systems. These alarms include:

Empty Pipe
Detects the absence of water in the flow tube and sends an alert. Allows you to identify main breaks downstream and water shortages for quicker resolution to ensure
water availability. This alarm can also indicate the water meter has been removed from service, or notify you of
potential tamper.

Customer Leak
Detect continual consumption of water over a period
of time to indicate downstream leaks. This protects
your utility, infrastructure and customers through
alarm notifications that can reduce water loss and leak adjustment costs.

Low Battery
Replace your meters before they stop recording
consumption through alerts indicating battery capacity to the meter or valve is running low.

Reverse Flow
Keep untreated water from re-entering your distribution system and deter tampering attempts through an alarm
triggered when reverse flow is detected at the meter.

High Flow
Detect broken pipes and reduce property damage
through an alert triggered by the detection of excessive flow rates.

Pressure
Get alerted when water pressure exceeds or falls below
the pressure threshold to prevent potential disruptions of service. Standard in 3” and above; optional in 1.5” and 2” sizes.

Temperature
Get alerted when water temperature exceeds or falls
below the temperature threshold so you can take action
to better protect your meter and water network assets.

Typical Headloss Curve
Flowrate m3/h
Headloss

1.5”
2”
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 34 ends

SENSUS G-500 LIMITED WARRANTY
REVISED JUNE 2024

1. General Product Coverage. Unless otherwise provided herein, Sensus USA Inc. (“Sensus”) warrants its products and parts to be free from defects in material and workmanship for one (1) year from the date of Sensus shipment and as set forth below. All products are sold to customer (“Customer”) pursuant to Sensus’ Terms of Sale, available at xylem.com.

2. SR II® and accuSTREAMTM 5/8”, 3/4” & 1” Meters are warranted to perform to new meter accuracy level set forth in the SR II and accuSTREAM Data Sheets available at sensus.com for five (5) years from the date of Sensus shipment or until the regis¬tration shown below, whichever occurs first. Sensus further warrants that the SR II and accuSTREAM meters will perform to at least AWWA Repaired Meter Accuracy Standards for fifteen (15) years from the date of Sensus shipment or until the registration shown below, whichever occurs first:

New Meter Accuracy Repair Meter Accuracy
5/8” SR II Meter and accuSTREAM Meter 500,000 gallons 1,500,000 gallons 3/4” SR II Meter and accuSTREAM Meter 750,000 gallons 2,250,000 gallons 1” SR II Meter and accuSTREAM Meter 1,000,000 gallons 3,000,000 gallons

3. SR II maincases are warranted to be free from defects in material and work-manship for twenty-five (25) years from the date of Sensus shipment. accuSTREAM maincases will be free from defects in mate¬rial and workmanship for fifteen (15) years from the date of Sensus shipment.

4. ally® Meters that register water flow are warranted to perform to the accuracy level set forth in the ally data sheet available at sensus.com for fifteen (15) years from the Date of Installation, but no longer than sixteen (16) years from date of manufacture, not including the meter’s sensors, valve, and gear motor, which are warranted under different terms described below. As used herein, “Date of Installation” means the date after which the ally Meter has been out of empty pipe for seven (7) consecutive days, as those days are measured by the ally Meter and stored in the meter’s nonvolatile memory.

5. ally® Meter Batteries and Components, including SmartPoint 510M/520M Modules are warranted to be free from defects in material and workmanship from the Date of Installation, as defined in Section 4, for the period stated below:

Batteries 15 years1
Sensors 5 years
Valve & Gear Motor 5 years2
SmartPoint 510M/520M modules and batteries in service w/ally 15 years1

6. iPERL® Meters that register water flow are warranted to perform to the accuracy levels set forth in the iPERL data sheet available at sensus.com for twenty (20) years from the date of Sensus shipment. The iPERL System Component warranty does not include the external housing.

7. iPERL, ally, OMNI+, and Cordonel Connectors and Cables are warranted to be free from defects in materials and workmanship, under normal use and service, for ten (10) years from the date of Sensus shipment. Nicor or Itron connectors included with a Sensus product are warranted according to the terms for Third-Party Devices in Section 16.

8. Sensus OMNI™, OMNI+ Meters and Propeller Meters are warranted to perform to as set forth in OMNI and Propeller data sheets for eighteen (18) months from the date of Sensus shipment.

9. Sensus Cordonel Meters are warranted to perform to the accuracy levels as set forth in the Cordonel data sheet available at sensus.com for twenty (20) years from the date of Sensus shipment. The Cordonel System Component warranty does not include the external housing.

10. Sensus Cordonel maincases are warranted to maintain their structural integrity for a period of twenty (20) years from the date of Sensus shipment.
1 I f applicable, any SmartPoint 510M/520M Modules ever paired with an ally meter or Cordonel with pressure meter are warranted with the following limitations:
• When configured to the default installation setting of six transmissions of metrology and pressure per day and one update of temperature per day, the SmartPoint module is warranted to perform up to five (5) firmware upgrades for the SmartPoint module and up to five (5) firmware upgrades for the ally meter or Cordonel (with pressure) meter; • 2500 Operational Commands, where “Operational Commands” include on demand reads (such as consumption, pressure, temperature), an ally meter valve command, or a configuration command; and • 15 Diagnostic Commands, which includes two-way communications tests and installations f or the first ten (10) years from Date of Installation at no cost. For the remaining five (5) years, Customer will pay the reduced Replacement Price of the then-current list price in effect at the time the product is accepted for return in accordance with the following schedule:

Years Replacement Price Years Replacement Price Years Replacement Price 1-10 0% 13 55% 15 75%
11 35% 14 65% >15 100%
12 45%
2 N otwithstanding the foregoing, valve and gear motor components of ally meters are not warranted beyond two thousand (2000) Valve State Operations, even if the warranty period provided herein has not yet expired. As used herein, “Valve State Operations” means adjustments of the Meter to open, close, or reduce flow.

11. Cordonel Meter Batteries and Components are warranted to be free from defects in material and workmanship from the Date of Installation, as defined in Section 9, for the period stated below:

Batteries 20 years3
Sensors 5 years
SmartPoint 510M/520M modules and batteries in service w/ Cordonel models with pressure
15 years1

12. Sensus accuMAG™ and HydroverseTM Meters are warranted to be free from defects in material and workmanship, under normal use and service, for 18 months from the date of Sensus shipment or 12 months from startup, whichever occurs first.

13. Sensus Registers are warranted to be free from defects in material and workmanship from the date of Sensus shipment for the periods stated below or until the applicable registration for AWWA Repaired Meter Accuracy Standards, as set forth above, are surpassed, whichever occurs first:
5/8” thru 2” SR II, accuSTREAM Standard Registers 25 years 5/8” thru 2” SR II, accuSTREAM Encoder Registers 10 years All HSPU, IMP Contactor, R.E.R. Elec. ROFI 1 year
OMNI and OMNI+ Registers with Battery 10 years
Standard and Encoder Registers for Propeller Meters 1 year

14. Sensus Electric and Gas Meters are warranted pursuant to the General Limited Warranty available at sensus.com/TC.

15. Batteries, iPERL System Components, AMR and FlexNet® Communication Network AMI Interface Devices are warranted to be free from defects in material and workmanship from the date of Sensus shipment for the period stated below:
7500 series Hand-Held Device 2 years
Act-Pak® Remote Monitoring Instruments 1 year
CPTP100 20 years4
EasyLink Reader 1 year
Electronic TouchPad 10 years
FlexNet Base Station (including the R100NA and M400 products) 1 year Gas SmartPoint® Modules and Batteries 20 years5
iPERL System Battery and iPERL System Components 20 years3 RM4160 1 year
3 S ensus will repair or replace non-performing:
• iPERL System Batteries, and/or the iPERL System flowtube, the flow sensing and data processing assemblies, and the register (“iPERL System Components”) with hourly reads manufactured after April 2018 • Cordonel System Batteries, the flow sensing and data processing assemblies, and the register (“Cordonel System Components”)
• SmartPoint 510M/520M/515M//512M-PLS/522M Modules manufactured after April 2018 (configured to the factory setting of six transmissions per day under normal system operation of up to one demand read to each SmartPoint Module per month and up to five firmware downloads during the life of the product) and batteries, unless the SmartPoint 510M/520M/522M Module is ever paired with an ally Meter, which immediately amends the warranty terms to those described in Section 13 at no cost for the first fifteen (15) years from the date of Sensus shipment, and for the remaining five (5) years at a prorated percentage, applied towards the published list price in effect for the year the product is accepted by Sensus under the warranty conditions according to the following schedule:

Years Replacement Price Years Replacement Price Years Replacement Price 1-15 0% 18 50% 20 70%
16 30% 19 60% >20 100%
17 40%
4 S ensus will repair or replace non-performing CPTP100 modules (configured at factory setting of four transmissions per day under normal system operations of up to one demand read per month and up to five firmware downloads during the life of the product) and batteries.
5 S ensus will repair or replace non-performing Gas SmartPoint Modules (configured to the factory setting of six transmissions per day under normal system operation of up to one demand read to each SmartPoint Module per month and up to five firmware downloads during the life of the product) and batteries, for the first ten (10) years from the date of Sensus shipment, and for the remaining ten (10) years, at a prorated percentage, applied towards the published list prices in effect for the year product is accepted by Sensus under warranty conditions according to the following schedule:

Years Replacement Price Years Replacement Price Years Replacement Price 1-10 0% 14 45% 18 65%
11 30% 15 50% 19 70%
12 35% 16 55% 20 75%
13 40% 17 60% >20 100%
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 35 ends

xylem.com
SENSUS | 639 Davis Drive | Morrisville, NC 27560 | 1-800-638-3748 © 2024 Xylem Inc. Sensus G-500 Limited Warranty Revised June 2024 Sensus® Electronic Register+™ 20 years6
Sensus® Smart Gateway Sensor Interface 1 year7
SmartPoint® 510M/520M/515M/512M Modules and Batteries 20 years3 Vehicle Gateway Base Station (VGB) and other AMR Equipment 1 year

16. Third-Party Devices are warranted to be free from defects in materials and workmanship, under normal use and service, for one (1) year from the date of Sensus shipment. As used in this Sensus Limited Warranty, “Third Party Devices” means any product, device, or component part used with a Sensus product that is manufactured or sold by any party that is not Sensus. Failure of a Third-Party Device which subsequently causes failure to a Sensus device shall be the responsibility of the manufacturer of the Third-Party Device.

17. Software. Software supplied and/or licensed by Sensus is supported accord¬ing to the terms of the applicable software license or usage agreement. Sensus warrants that any network and monitoring services shall be performed in a professional and workmanlike manner.

18. Return. Sensus’ obligation, and Customer’s exclusive remedy, under this Sensus Limited Warranty is, at Sensus’ option, to either (i) repair or replace the product, provided the Customer (a) returns the product to the location designated by Sensus within the warranty period; and (b) prepays the freight costs both to and from such location; or (ii) deliver replacement components to the Customer, provided the Customer installs, at its cost, such components in or on the product (as instructed by Sensus), provided, that if Sensus requests, the Customer (a) returns the product to the location designated by Sensus within the warranty period; and (b) prepays the freight costs both to and from such location. In all cases, if Customer does not return the product within the time period designated by Sensus, Sensus will invoice, and Customer will pay within thirty days of the invoice date, for the cost of the replacement product and/or components.

The return of products for warranty claims must follow Sensus’ Returned Materials Authorization (RMA) procedures. Water meter returns must include documentation of the Customer’s test results. Test results must be obtained according to AWWA standards and must specify the meter serial number. The test results will not be valid if the meter is found to contain foreign materials. If Customer chooses not to test a Sensus water meter prior to returning it to Sen-sus, Sensus will repair or replace the meter, at Sensus’ option, after the meter has been tested by Sensus. The Customer will be charged Sensus’ then current testing fee. All products must be returned in accordance with the RMA process. For all returns, Sensus reserves the right to request meter read¬ing records by serial number to validate warranty claims.

For products that have become discontinued or obsolete (“Obsolete Product”), Sensus may, at its discretion, replace such Obsolete Product with a different product model (“New Product”), provided that the New Product has substantially similar features as the Obsolete Product. The New Product shall be warranted as set forth in this Sensus Limited Warranty.

THIS SECTION 18 S E T S F O R T H C U S T O M E R ’ S S O L E R E M E D Y F O R T H E F A I L U R E O F T H E PRODUCTS, SERVICES OR LICENSED SOFT¬WARE TO CONFORM TO THEIR RESPECTIVE WAR¬RANTIES.

19. Warranty Exceptions and No Implied Warranties. This Sensus G-500 Limited Warranty does not include costs for removal or installation of products, or costs for replacement labor or materials, which are the responsibility of the Customer. The warranties in this Sensus G-500 Limited Warranty do not apply to and Sensus has no liability for goods that have been: installed improperly or in non-recommended installations; installed to a socket that is not functional, or is not in safe operating condition, or is damaged, or is in need of repair; tampered with; modified or repaired with parts or assemblies not certified in writing by Sensus, including without limitation, communication parts and assemblies; improperly modified or repaired (including as a result of modifications required by Sensus); converted; altered; damaged; read by equipment not approved by Sensus; for water meters, used with substances other than water, used with non-potable water, or used with water that contains dirt, debris, deposits, or other impurities; subjected to misuse, improper storage, improper care, improper maintenance, or improper periodic testing (collectively, “Exceptions.”). If Sensus identifies any Exceptions during examination, troubleshooting or performing any type of support on behalf of Customer, then Customer shall pay for and/or reimburse Sensus for all expenses incurred by Sensus in examining, troubleshooting, performing support activities, repairing, or replacing any Equipment that satisfies any of the Exceptions defined above. The above warranties do 6 S ensus will repair or replace non-performing Sensus Electronic Register+ with hourly reads for the first ten (10) years from the date of Sensus ship¬ment, and for the remaining ten (10) years, at a prorated percentage, applied towards the published list prices in effect for the year product is accepted by Sensus under warranty conditions according to the following schedule:

Years Replacement Price Years Replacement Price Years Replacement Price 1-10 0% 14 45% 18 65%
11 30% 15 50% 19 70%
12 35% 16 55% 20 75%
13 40% 17 60% >20 100%
7 Sensus® Smart Gateway Sensor Interface warranty valid only for analog Meter Sample Rates of four times per hour with a Standard Transmit Rate of hourly or greater for the analog channel(s). not apply in the event of Force Majeure, as defined in the Terms of Sale.

THE WARRANTIES SET FORTH IN THIS SENSUS G-500 LIMITED WARRANTY ARE THE ONLY

WARRANTIES GIVEN WITH RESPECT TO THE GOODS, SOFTWARE, SOFTWARE LICENSES AND SERVICES SOLD OR OTHERWISE PROVIDED BY SENSUS. SENSUS EXPRESSLY

DISCLAIMS ANY AND ALL OTHER REPRESENTATIONS, WARRANTIES, CONDITIONS,

EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE, REGARDING ANY MATTER IN CONNECTION WITH THIS SENSUS G-500 LIMITED WARRANTY OR WITH THE TERMS OF

SALE, INCLUDING WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, NON-INFRINGEMENT AND TITLE.

SENSUS ASSUMES NO LIABILITY FOR COSTS OR EXPENSES ASSOCIATED WITH LOST REVENUE OR WITH THE REMOVAL OR INSTALLATION OF EQUIPMENT. THE FOREGOING REMEDIES ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES FOR THE FAILURE OF

EQUIPMENT, LICENSED SOFTWARE OR SOFTWARE SERVICES, AND OTHER SERVICES TO CONFORM TO THEIR RESPECTIVE WARRANTIES.

20. Limitation of Liability.
a. SENSUS’ AGGREGATE LIABILITY IN ANY AND ALL CAUSES OF ACTION ARISING UNDER,

OUT OF OR IN RELATION TO THIS AGREEMENT, ITS NEGOTIATION, PERFORMANCE, BREACH OR TERMINATION (COLLECTIVELY “CAUSES OF ACTION”) SHALL NOT EXCEED THE TOTAL AMOUNT PAID BY CUSTOMER TO SENSUS UNDER THIS AGREEMENT. THIS IS

SO WHETHER THE CAUSES OF ACTION ARE IN TORT, INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY, IN CONTRACT, UNDER STATUTE OR OTHERWISE. b. AS A SEPARATE AND INDEPENDENT LIMITATION ON LIABILITY, SENSUS’ LIABILITY S H A L L B E L I M I T E D T O D I R E C T D A M A G E S . S E N S U S S H A L L N O T B E L I A B L E F O R : ( I ) ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES; NOR (II) ANY

REVENUE OR PROFITS LOST BY CUSTOMER OR ITS AFFILIATES FROM ANY END USER(S),

IRRESPECTIVE OF WHETHER SUCH LOST REVENUE OR PROFITS IS CATEGORIZED AS DIRECT DAMAGES OR OTHERWISE; NOR (III) ANY IN/OUT COSTS; NOR (IV) MANUAL METER READ COSTS AND EXPENSES.
c. The limitations on liability set forth in this Agreement are fundamental inducements to Sensus entering into this Agreement. They apply unconditionally and in all respects. They are to be interpreted broadly so as to give Sensus the maximum protection permitted under law. d. To the maximum extent permitted by law, no Cause of Action may be instituted by Customer against Sensus more than TWELVE (12) MONTHS after the Cause of Action first arose. In the calculation of any damages in any Cause of Action, no damages incurred more than TWELVE (12) MONTHS prior to the filing of the Cause of Action shall be recoverable.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 36 ends

Thirkettle Corporation General Terms of Sale

1. DEFINITIONS.

1.1. “Customer” means the party purchasing goods or services pursuant to these Terms of Sale (“Terms”).

1.2. “Company” means Thirkettle Corporation , including without limitation wholly owned subsidiaries Aqua-Metric Sales Company™ and Utiliuse™, who is the authorized reseller of certain Goods provided to Customer.

1.3. “Goods” broadly means the collective Products and/or Services sold or otherwise provided by the Company.

1.4. “Product” means any tangible material , object, or software offered for sale by the Company.

1.5. “Service” means a business act or task as performed by an individual at a predetermined billable rate.

1.6. “Supplier” refers to a third- party business entity who manufacturers or supplies various Goods furnished by the Company.

2. CONTRACT OF SALE. All Goods offered for sale are subject to the prices and terms specified in (i) the Terms outlined herein , (ii) an applicable Company quotation, bid, or proposal (collectively, the “Proposal”), and/or (iii) separate agreement duly executed by and between the Company and Customer; all of which are subject to change. A Customer’s purchase order or similar writing shall constitute an acceptance of the offer to sell (the “Agreement”); however, any inconsistent, additional or different terms to the Proposal contained in a Customer’s request for quotation or purchase order (collectively, “Additional Terms”) are hereby objected to and rejected by the Company. Such Additional Terms will not become part of the Agreement unless accepted by the Company in a writing. Notwithstanding anything to the contrary herein, these Terms may be incorporated by reference or otherwise modified, in whole or in part, into a mutually acceptable agreement duly executed between the Company and the Customer.

3. PROPOSALS. Proposals are inclusive of only the Goods detailed within a formal Company quotation form. Proposals will remain valid for a period of thirty (30) days unless otherwise noted. All pricing is subject to change based on the manufacturer’s suggested retail price. The Company reserves the right to apply a price adjustment to all quotes or orders received and not delivered to the Customer as a result of economic price increase or decrease in cost of raw materials, labor, or transport at the time imposed by the Company ’s Suppliers. Any supplemental or incidental Goods required but not included will be subject to additional costs to the Customer. THE COMPANY MAKES NO GUARANTEE, EITHER EXPRESSED OR IMPLIED, THAT PROPOSAL PRICING IS ALL INCLUSIVE.

4. ANNUAL SERVICES. Annual Services are the recurring fees for software or Services required to operate, maintain, or support Customer’s product and/or software; including but not limited to annual support fees, Software-as-a-Service (or “SaaS”) licensing fees , server or data hosting and licensing fees, or any fee requiring a fee for service. Unless otherwise agreed upon in writhing between the Company and Customer, annual subscription services will automatically renew annually and will be subject to an automa tic annual escalation to the antecedent annual fee imposed by the Supplier.

5. TAXES AND FEES. All prices quoted are exclusive of federal taxes, state taxes, municipal taxes, tariffs, duties, and other government -imposed fees (collectively the “Taxes and Fees”) related to the procurement, installation, and delivery of materials and e quipment. Customer shall be liable for all Taxes and Fees imposed upon the Goods purchased under this Agreement. Taxes and Fees will be added to each applicable invoice and are the responsibility of the Customer. If Customer is exempt from sales tax, Custo mer is required to provide all applicable tax exemption documentation at the time of purchase. Any changes in Taxes and Fees during this Agreement may result in adjustments to the final invoice accordingly.

6. PAYMENT TERMS. Customer shall pay all undisputed invoices in US Dollars within thirty (30) days of the invoice date. The Company reserves the right to establish credit limits for Customer and may require full or partial payment prior to provisioning of any Goods. All payments shall be made via credit card (VISA or MasterCard), check or electronic ACH payment. In the event of dispute, Customer must notify the Company, in writing, within seven (7) days of receipt of an invoice. Notwithstanding, if Customer fails to pay any non -disputed invoice within 30 days of the invoice date, the Company may, in its sole discretion, 1) assess late fees in the amount of one (1) percent per calendar day past due or the highest rate permitted by law , 2) place Customer on “credit hold” and withhold or suspend, in whole or in part, current or future orders or business Services, including without limitation the Annual Services; until Customer has paid all delinquent amounts plus any applicable late fees to the Company. Further, the Company may, in its sole discretion, transfer delinquent invoices to a third -party collections agency . In such event, Customer will be responsible for all fees assessed, including reasonable attorney fees, to collect Customer debts.

7. PRODUCT LEAD TIMES. All purchase orders will be prioritized and fulfilled in the order received. Stock orders will be fulfilled in the most expeditious means available. Non-stock or special order Goods delivery times will be subject to availability and Supplier lead times.

8. PACKAGING. The Company reserves the right to select the manner in which Products are packaged. Quoted prices include standard packaging.

Special requirements for packaging will be subject to additional charges.

9. SHIPPING AND HANDLING. All Products will be shipped Freight on Board (FOB) Destination Freight Prepaid and Added . The Company will ship all
Products using the most economical ground transportation service.

Expedited shipments, such as “next day” or “second day”, will be at the Customers expense unless otherwise agreed upon by the Company. All applicable shipping and handling charges will be included on the Company’s invoice to the Customer. The Company does not guarantee and therefore will not be liable for any delays in shipment.

10. FREIGHT. Oversized Product(s) or bulk orders will be shipped on standard Less-Than-Truckload (“LTL”) freight carriers when applicable. The Customer is required to provide the necessary equipment required (i.e. loading dock, fork lift, pallet jack, etc.) to unload the shipment upon arrival. If the Customer does not have access to equipment necessary to unload the Product(s), Customer must inform the Company in advance and prior to shipment. Customer will be responsible for any additional cost(s) or fee(s) incurred for special handling requirements.

11. FREIGHT ALLOWANCE. Single Sensus product orders exceeding $8 0,000 will be shipped FOB Freight Allowed unless otherwise specified and agreed upon in writing. Freight allowance is only applicable to single orders shipped complete. Partial shipments must be specified in writing at the time of order placement. The Company reserves the right to refuse freight allowance and/or bill partial freight costs on final invoice.

12. TITLE. Title of Product(s) shall transfer to customer on the date of delivery to Customer’s premises.

13. LOSS OR DAMAGE CLAIMS. The Customer is responsible for reporting lost or damaged Products as a result of improper packaging and/or handling to the Company within fifteen (15) business days. Claims may become void if made more than fifteen (15) business days after the product shipment date . Damaged Product(s) will be returned to the point of origin for inspection. The Company reserves the right to repair or replace product(s) damaged in shipment.

14. CHANGES OR CANCELLATIONS. Orders submitted to the Company must be canceled or changed by Customer in writing prior to the shipment of Product(s). The Company reserves the right to invoice shipping charges for orders cancelled after deliverables shipped.

15. RETURNS. No Product(s) may be returned for refund without the prior written authorization of the Company. The Company reserves the right to refund the cost of deliverables less a restocking fee and/or shipping and handling charges upon receipt of return product. Refunds will be processed and issued within thirty (30) days from the receipt of the returned product(s). Auth orized return s must be received by the Company within six (6) months of the delivery date to the Customer , in “like-new” condition to the Company's designated receiving point, must be shipped in original or suitable packaging, must be accompanied by a packing slip, including the Company's return authorization number, and must have transportation charges prepaid. All returned product(s) will be inspected upon delivery for any indication of use or damage.

Customer will be responsible for returning the product(s) to the Company's designated distribution warehouse and any cost(s) incurred to repackage and/or shipping carrier fees. Customer will be responsible RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 37 ends

Thirkettle Corporation General Terms of Sale
for any damages incurred during shipment. The Company reserves the right to refuse Product(s) which have been installed, used, or otherwise returned in any condition other than new. The Company reserves the right to deduct an adequate service charge to cover all inspection, testing and handling from any return.

16. RESTOCKING FEE. Return Product(s) are subject to a twenty -five percent (25%) restocking fee . Special order Product(s), including but not limited to: meter reading equipment, infrastructure, or any Product(s) requiring a unique configuration, are subject to fifty percent (50%) restocking fee.

Due to the custom configuration of electric meters, all electric meter sales are final.

17. OBSOLESCENCE. The Company shall not be held liable for planned or unplanned obsolescence of product(s), parts, or software discontinued by any Supplier.

18. PRODUCT WARRANTIES.

18.1. EXCEPT AS SPECIFICALLY SET FORTH IN THIS AGREEMENT, THE

SERVICES AND SOFTWARE ARE PROVIDED BY THE COMPANY ON
AN “AS IS” AND “AS AVAILABLE” BASIS WITHOUT WARRANTIES OF

ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ; HOWEVER, ANY SUPPLIER

WARRANTIES RECEIVED BY THE COMPANY FROM ITS SUPPLIERS
SHALL BE PASSED ONTO CUSTOMER .

18.2. The Company warrants that the Services provided by the Company will be performed in a professional and workmanlike manner with a degree of care, skill and competence that is consistent with the then generally accepted industry standards reasonably expected of similar types of engagements and the Goods will substantially conform to the Goods specified in the applicable Proposal.

18.3. The Company further warrants that the Product(s) furnished shall be provided to the best of the Company’s reasonable ability and in accordance with the information and data provided by Customer in the preparation of the Proposal. The Company makes no representation, warranty, or covenants that the Product(s) furnished will be fully identical or c ompatible with the make, model, or type required by Customer’s specifications.

18.4. Standard Supplier’s Warranty. Where available, standard Supplier warranties shall apply to all software, service(s), and product(s) furnished by the Company ’s third -party Suppliers. Nothing in these Terms shall be construed to amend, extend, enhance, or limit the supplier warranties offered unless such change has been expressly offered by the Supplier in writing and duly accepted by the parties under separate agreement .

18.5. Meter Services Warranty. This Meter Services Limited Warranty covers the Meter Services (defined below) furnished under Agreement and in accordance with the terms and conditions as follows:

A. Definitions.

I. “Meter Services” means the installation or exchange of certain residential, commercial, or industrial water,
electric, or gas utility meter(s) as provided by the
Company or its subcontractor and pursuant to the
services performed under agreement.

II. “Service Account” means Customer’s physical property to which Customer provides a Utility Service.

III. “Utility Service” means the water, electric, and/or gas service offered and provided by Customer as applicable.

IV. “Worksite” means the actual area of work at the Service Account where the utility meter is located.

B. General Conditions.

I. The Company warrants that the Meter Services will be performed in a professional and workmanlike manner ,
exercising discretion in determining the appropriate
degree of care, skill, and competence, and aligning with industry standards and codes to the extent reasonably
practicable for similar type work.

II. The warranty is valid for a period of thirty (30) calendar days from the date the Meter Services were performed
(the “Warranty Period”).

III. The warranty is limited to the actual work performed by the Company or its subcontractors and does not include
work performed by third parties not hired by the
Company.

IV. The Company reserves the right, at its sole discretion, to inspect the Worksite and determine the appropriate
course of action to address any warranty defect. If a
claim for damage or defect is determined not to be
covered by the warranty, the Company may invoice the
Customer for any and all costs incurred in inspecting the Worksite. The Company ’s liability to the Customer
under this warranty is strictly limited to , at the
Company's option, the repair or correction of the
defective Meter Services, and the Company shall not be
liable for any other damages or costs .

V. This warranty is limited to the labor provided to perform the Meter Services and does not include labor to
replace manufacturer defects unless such defect was
actually caused by the Company’s or it’s subcontractor’s negligence.

C. Water Utility Service.

I. The warranty is limited to the actual area of work : 1) within the meter box (exterior meter sets); or 2) end-to- end between the meter couplings (interior meter sets).

II. Customer acknowledges and agrees the Company may
be unable to reasonably identify the presence or threat of potential or pre- existing damages or defects to the Customer’s or property owner’s service line. The
Company does not warrant against damage or defect(s),
whether or not such damage or defect was known, of
the materials currently installed at the Service Account; including but not limited to the utility meter, service line piping, meter couplings, fittings, galv anized lines or fittings, curb stops, sh ut off valves, meter risers, meter setters, meter boxes or meter box lids, adjacent utilities lines in or around the utility meter, or other similar
materials installed by others which have or may fail
during the Meter Services due to age, normal wear and
tear, deterioration, defect, deflection caused by ground shift, service line spring, high pressure or repressurizing of the water service, non- compliance with current
industry regulations or codes, negligence, tampering, or lack of proper or routine mainte nance.

III. Customer acknowledges and agrees that the temporary disconnection of the water Utility Service to conduct the Meter Services , and any subsequent restoration or
pressurization of the water service, may introduce dirt or loosen service line debris ( including but not limited to hard water, scale, sediment, etc.) into the service
line. Such occurrences shall not constitute a material
breach of this Agreement or negligence on the part of
the Company. The Company shall not be liable for any
damage or defects to household fixtures, including but
not limited to water heaters, water softening or
filtration systems, sloan valves, appliances, water
pressure, electronics, or any other related
appurtenances that rely on the water Utility Service
provided by Customer. Customer further agrees to
indemnify, defend, and hold harmless the Company
from any claims, liabilities, or damages arising from such occurrences.

D. Electric Utility Service.

I. The warranty is limited to the actual area of work
contained within the electrical meter box.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 38 ends

Thirkettle Corporation General Terms of Sale
II. The Company does not warrant against damage or
defect to electrical equipment including but not limited to wiring, conduit, wire nuts, relays, sockets, main
switch, fuses and circuit breakers such as the residual current device (RCD), or other similar materials installed by others and contained within the meter box which
may fail during the Meter Services due to age, normal
wear and tear, deterioration, defect, non -compliant
with current industry regulations or codes, negligence, tampering, or lack of proper or routin e maintenance.

Further, the Company does not warrant against damage
or defect caused by hot sockets, overcurrent, electrical arcing, or external factors such as electrical surges.

III. Customer acknowledges and agrees that the electric Utility Service will be temporarily disconnected to
conduct the Meter Services. The Company shall not be
liable for any damage, defect, or loss to household
fixtures, including but not limited to fuse and circuit panels, wiring, receptacles and switches, appliances,
electronics, lighting, or any other related
appurtenances that rely on the electric Utility Service provided by Customer and may become damaged,
defective, or otherwise affected due to the electrical
Utility Service disruption. Customer assumes all risks associated with such disruption and agrees to
indemnify, defend, and hold harmless the Company
from any claims, liabilities, or losses arising therefrom.

E. Gas Utility Service.

I. The warranty is limited to the actual work performed to exchange or retrofit a gas index or SmartPoint to the
existing gas meter. The Company will not disconnect the gas Utility Service or perform any other service to the existing gas utility meter during the Meter Service.

F. Limitations.

I. The Company does not warrant against defects to the work resulting from tamper, vandalism, negligence,
“Acts-of-God”, pre- existing or uncontrollable
conditions, or any service work or repair performed by
third parties not hired by the Company.

II. Unless otherwise expressly provided herein, neither the Company, nor any of its suppliers, vendors, licensors,
subcontractors, including employees, agents, or assigns thereof, warrants that the operation of the services will be uninterrupted or error free. Further, neither the
Company, nor any of its suppliers, vendors, licensors,
subcontractors, including employees, agents, or assigns thereof, will be responsible for (i) lost revenue,
including revenue lost from third parties, persons, or
entities, such as bills for electricity, lighting, gas, or water consumption; (ii) any In/Out Costs, where “In/Out Costs means any and all costs and expense incurred by
Customer in transporting goods between Customer’s
warehouse and Service Account, including any and all
costs and expenses incurred in installing, uninstalling, and removing goods; and (iii) any manual meter reading
costs and expenses.

III. The Company , nor any of its suppliers, vendors,
subcontractors, or assigns including employees, agents, or assigns thereof, shall not be responsible for any
Service Account in which it’s occupant(s) rely on the
Utility Service for medical reasons, including proper
function of certain medical equipment, and such Service Accounts have not been previously disclosed by
Customer to the Company . In avoidance of doubt, the
Company expressly disclaims liability for Service
Accounts which require Utility Services to operate
certain medical equipment including but not limited to
breathing machines, respiratory devices, ventilators,
cardiac pumps, apnea monitors, feeding equipment,
dialysis, communication devices, or other similar
devices. Customer will provide the Company with a list
of all known or suspect Service Accounts which rely on
constant Utility Services to operate medical equipment
in advance of the Meter Services. TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE STATE LAW(S),

CLIENT SHALL HOLD THE COMPANY, ITS SUPPLIERS,

SUBCONTRACTORS, OFFICERS, DIRECTORS,

MANAGERS, EMPLOYEES, AND ASSIGNS HARMLESS

FROM ANY AND ALL LOSSES, COSTS, FINES, PENALTIES,

DAMAGES, AND OTHER AMOUNTS (INCLUDING

REASONABLE ATTORNEY FEES) INCURRED BY, ASSESSED

AGAINST, OR IMPOSED ON THE COMPANY AND

ARISING FROM OR IN CONNECTION WITH ANY AND ALL

THIRD PARTY SUITS, CLAIMS, ACTIONS OR DEMANDS

FOR (I) PERSONAL INJURIES, DEATH OR (II) DAMAGE TO

TANGIBLE PERSONAL AND REAL PROPERTY CAUSED BY
CLIENT’S FAILURE TO COMPLY WITH THIS SECTION.

G. LIMITATIONS AND DISCLAIMERS OF LIABILITY.

I. LIMITATIONS. Unless otherwise expressly provided
herein, neither the Company nor any of its service
providers, licensors, employees or agents warrant that the operation of the Services will be uninterrupted or
error free. The Company will not be responsible for any damages that Customer may suffer arising out of use, or inability to use, the Services , except to the extent such damages are directly caused by the Company's gross
negligence or willful misconduct .

II. DISCLAIMER OF CERTAIN DAMAGES. IN NO EVENT

SHALL ANY PARTY HAVE ANY LIABILITY TO ANOTHER

PARTY HERETO FOR ANY LOST PROFITS (WHETHER

DIRECT OR INDIRECT), LOSS OF USE, COSTS OF COVER,

OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE,

OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED

AND, WHETHER IN CONTRACT, TORT, WARRANTY OR

UNDER ANY OTHER THEORY OF LIABILITY, WHETHER OR

NOT THE PARTY HAS BEEN ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE , EXCEPT TO THE EXTENT SUCH

DAMAGES ARE DIRECTLY CAUSED BY THE COMPANY'S
GROSS NEGLIGENCE OR WILLFUL MISCONDUCT .

19. RETURN MATERIAL AUTHORIZATION. Product(s) returned for warranty and in accordance with Standard Supplier’s Warranty will be returned directly to the Supplier unless otherwise instructed by the Company .

Customer shall submit a list of defective items with description of failure, Product(s) type(s), model(s), s erial number(s) or identification number(s), and any additional pertinent information requested by the Company to identify the product in Excel format to rma-norcal@aqua- metric.com; [email protected]; rma-texas@aqua-
metric.com; or [email protected]. The Company will generate a Return Material Authorization (“RMA”) form for the Customer to include with the Product(s) shipment to t he Supplier.

Customer will be responsible for any cost(s) incurred to return the Product(s) to the Supplier for warranty claims.

20. FORCE MAJEURE. The Company shall not be held liable for delay , suspension, or cancellation in fulfilling or failure to fulfill its obligations under this Agreement, if such delay or failure is caused by events beyond the Company’s reasonable control, including, without limitation, natural calamity, acts of God, terrorist events, pandemic, epidemic, strikes, lockouts or labor disruption, wars, riots or embargo delays, government allocations or priorities, shortages of transportation , fuel, labor, or materials, inability to produce or procure the products or raw materials, or any other circumstance or cause, including unforeseen cost(s) imposed upon the Company by its Suppliers or governmental mandate to furnish the Goods which may arise from circumstances beyond the Company’s reasonable control.

21. LIMITATION OF LIABILITY.

21.1. THE COMPANY’S AGGREGATE LIABILITY IN ANY AND ALL CAUSES

OF ACTION ARISING UNDER, OUT OF OR IN RELATION TO THIS

AGREEMENT, ITS NEGOTIATION, PERFORMANCE, BREACH OR
RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 39 ends

Thirkettle Corporation General Terms of Sale
TERMINATION (COLLECTIVELY “CAUSES OF ACTION”) SHALL NOT

EXCEED THE TOTAL AMOUNT PAID BY CUSTOMER TO THE
COMPANY UNDER THIS AGREEMENT. THIS LIMITATION OF

LIABILITY SHALL APPLY REGARDLESS OF THE LEGAL THEORY

UNDER WHICH THE CLAIM IS BROUGHT, INCLUDING BUT NOT

LIMITED TO BREACH OF CONTRACT, WARRANTY, NEGLIGENCE,
STRICT LIABILITY, OR ANY OTHER LEGAL OR EQUITABLE THEORY.

21.2. AS A SEPARATE AND INDEPENDENT LIMITATION ON LIABILITY, THE COMPANY’S LIABILITY SHALL BE LIMITED TO DIRECT
DAMAGES. THE COMPANY SHALL NOT BE LIABLE FOR: (I) ANY
INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES;

NOR (II) ANY REVENUE OR PROFITS LOST BY CUSTOMER OR ITS

AFFILIATES FROM ANY END USER IRRESPECTIVE OF WHETHER

SUCH LOST REVENUE OR PROFITS IS CATEGORIZED AS DIRECT

DAMAGES OR OTHERWISE, INCLUDING REVENUE LOST FROM

THIRD PARTIES, PERSONS, OR ENTITIES, SUCH AS BILLS FOR
ELECTRICITY, LIGHTING, GAS, OR WATER CONSUMPTION; NOR
(III) ANY IN/OUT COSTS; NOR (IV) CLAIMS MADE BY A THIRD PARTY; NOR (V) MANUAL METER READ COSTS AND EXPENSES.
“IN/OUT COSTS” MEANS ANY COSTS AND EXPENSES INCURRED BY

CUSTOMER IN TRANSPORTING GOODS BETWEEN ITS
WAREHOUSE AND ITS END USER’S PREMISES AND ANY COSTS

AND EXPENSES INCURRED BY CUSTOMER IN INSTALLING,
UNINSTALLING AND REMOVING GOODS. “END USER” MEANS ANY

END USER OF ELECTRICITY/WATER/GAS THAT PAYS CUSTOMER

FOR THE CONSUMPTION OF ELECTRICITY/WATER/GAS, AS
APPLICABLE.

21.3. The limitations on liability set forth in this Agreement are fundamental inducements to the Company entering into this Agreement. They apply unconditionally and in all respects and shall be interpreted as broadly as possible to afford the Company the maximum protection permitted under law. To the fullest extent permitted by law, no Cause of Action may be instituted by Customer against the Company more than six (6) months after the Cause of Action first arose. In the calculation of any damages in any Cause of Action, no damages incurred more than six (6) months prior to the filing of the Cause of Action shall be recoverable. If Customer is not the sole end user and ultimate owner of the Deliverables, then Customer shall ensure by its contract with the end user and ultimate owner (collectively, “Owner”) that the Company is given the benefit of the exclusions and limitations set out in these Terms. To the maximum extent permitted by law, Customer agrees to indemnify, defend, and hold harmless the Company from and against any and all claims, liabilities, losses, damages, costs, and expenses, including attorney's fees, arising from or related to any Owner's claims, to the extent that the Company would not be liable to Customer under these Terms if the claim had been made by Customer.

22. INDEMNIFICATION. To the maximum extent permitted by law, Customer agrees to defend, indemnify, and hold the Company harmless from any and all losses, costs, fines, penalties, damages , and other amounts, including reasonable attorney fees (collectively the “Losses”), incurred by, assessed against , or imposed on the Company arising from or in connection with Customer’s use of the Goods, regardless of whether such Losses were caused in part by the Company’s actions or omissions, except to the extent such Losses were solely and directly caused by the Company’s willful misconduct or gross negligence .

23. CONFIDENTIAL INFORMATION. As used herein, “Confidential Information” refers to any non -public, proprietary, or sensitive information disclosed by one party to another party in connection with this Agreement, whether in written, oral, electronic, or any other form.

Confidential Information includes without limitation business plans, strategies, financial data, pricing, contracts, trade secrets, proprietary technology, software, technical specifications, Customer data (such as billing account data, payment in formation), Supplier information, employee information, and any other work product or information marked or reasonably understood to be confidential. Each party shall hold the other party’s Confidential Information in confidence and shall not disclose such Confidential Information to third parties other than to consultants or contractors, subject to similar terms of confidentiality, when disclosure is necessary for the purposes set forth herein, nor use the other party’s Confidential Information for any pur pose other than the purposes set forth under this Agreement. The foregoing restrictions on disclosure shall not apply to information which is: (i) already known by the public , (ii) becomes, through no act or fault of the recipient, publicly known, (iii) received by recipient from a third party without a restriction on disclosure or use, (iv) independently developed by recipient without reference to the other party’s Confidenti al Information, or (v) is a public record under applicable laws, subject to the terms of this Section. The Customer will maintain the confidentiality of all Company Confidential Information, and the Company will maintain the confidentiality of all Customer Confidential Information, with each party taking all reasonable precautions to protect the same, and at a minimum taking those precautions used to protect its own Confidential Information from unauthorized use or disclosure.

24. ASSIGNMENT. Customer may not assign, transfer or delegate this Agreement or any part of Customer’s rights or duties without prior written consent of the Company. Any attempted assignment in violation of this section shall be null and void.

25. GOVERNING LAW AND DISPUTE RESOLUTION. This Agreement shall be governed by and construed in accordance with the laws of the State of California, without regard to its conflict of law s principles. In the event of any dispute arising out of or relating to this Agreement, the parties agree that jurisdiction and venue shall be proper in the state and federal courts of California, or, where applicable, in the state where the transaction giving rise to the dispute occurred. The parties shall first attempt to resolve the matter through an informal dispute resolution process by making a good faith effort, either through email, mail, phone conference, in person meetings, or other reasonable means to resolve any claim, dispute, breach or other matter in question that may arise out of, or in connection with this Agreement. If the parties fail to resolve the dispute within sixty (60) days of the date of receipt of the notice of the dispute, then the parties shall submit the matter to non- binding mediation. If no resolution is reached after having completed these steps in good faith, any legal action shall be brought in the state or federal courts located in California, and both parties consent to the exclusive jurisdiction and venue of such courts unless otherwise agreed.

26. COMPLIANCE WITH LAWS. Customer shall at all times comply with all applicable laws and regulations, as they exist at the time of acceptance and as they may be amended, changed, or supplemented. Customer shall not take any action or permit any action by a third party that could result in the Company being held liable for any violation of applicable laws. Customer shall perform its obligations under this Agreement in strict compliance with all Laws applicable to Customer’s business, activities, and facilities. "Laws" shall include and refer to any and all federal (national), state, provincial, municipal , or local laws, regulations, rules, judicial decrees, decisions and judgments, executive and government orders and ordinances, and any and all directives of regional legislative and regulatory bodies and implementing legislation, as well as rules and regul ations of any self- regulatory organization by which any party may be bound. Customer agrees to indemnify, defend, and hold harmless the Company from and against any and all claims, liabilities, losses, damages, costs, and expenses arising from or related to Customer's failure to comply with this clause.

27. SEVERABILITY. In the event any provision of this Agreement is held to be void, unlawful or otherwise unenforceable, that provision will be severed from the remainder of the Agreement and replaced automatically by a provision containing terms as nearly like the void, unlawful, or unenforceable provision as possible; and the Agreement, as so modified, will continue to be in full force and effect.

28. NON-WAIVER. The failure, delay, or partial exercise by the Company in exercising any right, power, or privilege under this Agreement shall not be construed as a waiver of any such right, power, or privilege, nor shall it preclude any other or further exercise thereof or the exercise of any other right, power, or privilege. Any waiver by the Company must be in writing and signed by an authorized r epresentative of the Company to be effective.

RFP #2526-RFP-007, Water Meters
Aqua-Metric Sales Company

Page 40 ends

City Council - Successor Agency - Housing AuthorityApril 21, 2026

City Council - Successor Agency - Housing Authority
April 21, 2026