680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
To: City of Garden Grove Public Works / Water Division Bid Date: 05/27/2026 Re: Victor Yergensen Scope Date: 05/27/2026
Work Cell (714) 488-1574 Quote No.: 05272026CS-2
Dear Victor:
Thank you for your interest in Sulzer and the services we provide. We appreciate the opportunity to quote the following scope of work for the above-referenced project. The materials and services listed below are quoted with respect to and in conformance with the requirements presented in the following sections: SPECIFICATIONS SECTIONS: DRAWING: SO # 86079 Booster Pump P-204 (11-30-2012), Site Pictures, SHEETS:. ADDENDUM: None
This quote is valid for 30 days from date of quotation. Due to the recent tariff announcement from the U.S.
Government, effective for shipments made on or after April 21, 2025, certain finished goods and products containing imported components or materials maybe subject to price adjustments commensurate with th e cost impact. All work is performed in accordance with Sulzer EMS terms & conditions. Thank you for the opportunity to quote this project. Please contact us at your earliest convenience regarding this quote and any other services you may require.
Scope of Work
Item No Qty Description
1 LS Booster Pump P-204
Retrofit: Westinghouse MCC-1 200HP Normal Duty @ 480V,3-PH, 3W, 65KAIC
New items to be replaced.
o [1] 200HP Toshiba VFAS3 VFD
o [1] AS3 Remote Keypad
o [1] AS3 Remote Keypad Kit
o [1] AS3 Internal DC Line Choke (Included inside the drive). o [1] 330A Input Contactor Sq-D TeSys for 200HP w/ Aux contacts o As Req. IDEC Relays, Timers and Sockets.
o [1] Door Elapse Time Meter
o [2] Pfannenberg 12” x 12” Cooling Fans & Exhaust Grilles installed in a 30”x30”x6” box and then mounted on door (For better cooling of MCC section a door mounted fan box is needed due to limited depth for new fans).
Note: Door Pilot Light, Selector Switches and Push Buttons to be reused.
VFD Size Detail:
Old VFD: VFAS1-4132KPC-HN (40.2”H x 13.8”W x 14.6”D) New VFD: VFAS3-4110KPC (33.5”H x 12.7”W x 15.4”D) Note: MCC depth clearance is 16”, which will allow for the new AS3 drive to fit.
680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
P-204 Drive Unit
680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
The existing ISC 10” fans do not provide sufficient CFM air flow for cooling and therefore this Westinghouse MCC section is running hotter than the other Sq-D MCC drive section. [2] 12” cooling fans with higher CFM is required.
[2] 12.59” x 12,59” Cooling fans recessed into front of enclosure & mounted on door of MCC.
Includes sealing off the lower perforated MCC grille from the inside with sheet metal and adding fresh paint to match MCC and fan box.
680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
The 6” deep fan box should not imped operators access and walk area since the Westinghouse Main Switchboard extends approx. 12”-14” farther out than MCC door.
680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
SUBTOTAL (not including applicable sales tax): $32,872.65 2 LS Engineering Services
• Submittals and O&M Manuals
• Project Management Services
• Factory Acceptance Testing
• Start-up Services: installation verification, training, signal troubleshooting,
Project Total (Items 1-2 above) $32,872.65
Exclusions
Unless otherwise noted, Sulzer excludes any work not listed in the scope of work above, including but not limited to, installation, interconnection power cables between MSB, MCC, generator, and motors. RTU/PLC & HMI Programming.
Generator and Generator breaker, Sinewave Filter. No other MCC control panels or motor disconnect switches, oversized motor junction boxes, building security, lighting, and controls. Breaker adjustments, valves, supports. Any third-party testing or instrumentation. All programming related to the supervisory control and data acquisition (SCADA) system. Installation of mechanical inline devices. Demolition. Any extended warranty shall be provided by manufacturer only, Sulzer will not provide the extended warranty.
Lead Time
We are diligently working with our partners to expedite supplies, delays are being anticipated. Unless otherwise noted, the following lead times are to be expected.
Submittals: 4-6 weeks
Payment Terms
Sulzer will receive periodic progress payments for Work performed, materials in place, suitably stored on site, or as otherwise agreed to by the Owner and the Contractor. Progress payments are made provisionally and do not constitute acceptance of Work not in accordance with the Contract Documents. Sulzer will not process Change Order work until all parties execute the Change Order and payment is agreed upon by the owner and contractor.
Schedule of payment, based on total contract value, will be as follows, Net 30 days.
1) 30% on contract execution
2) 20% on receipt of approved submittals
3) 35% on receipt of materials at Sulzer shop
4) 15% on delivery of equipment
680 S. Rancho Ave. Colton, CA 92324-3243
Phone: 1 (909) 825-7971
Fax ...: 1 (909) 825-6312
Any increase in Seller’s cost of transporting the Goods arising after issuance of this order caused by any change in law, reg ulation, tax, tariff, customs duty rate, throughput fee or otherwise shall be grounds for a change order and shall be charged to Bu yer.
Unless otherwise agreed in a previous agreement, this quote and our delivery is subject to the GENERAL TERMS AND CONDITIONS O F SUPPLY AND SERVICE SULZER Electro Mechanical Services (US) Inc. which are available on the Sulzer website (https://www.sulzer.com/en/shared/legal/terms-and-conditions)
The quoted price is valid for 30 days from date of quotation. Sulzer warranty applies to defects in Sulzer supplied parts and workmanship only. If the customer chooses not to repair this item, there will be an inspection charge. Thank you for the opportunity to quote this project. If paying with a Credit Card, there will be a processing fee of 3.1%. Please contact us at your earliest convenience regarding this repair and regarding any other services you may require.
Best regards,
OCHOA, BRIAN – Area Sales Manager CC: Slape,
Craig – Inside Sales representative