OF TONE
CITY OF IONE
IONE, CA 95640
FOR
SPECIAL MEETING STARTS AT 6:30 PM
Mayor Alison LaFayne
Vice Mayor Diane Wratten
Councilmember Dominic Atlan
Councilmember Jack Mitchell
Councilmember Stacy Rhoades-will be attending via Zoom
REMOTE MEETING LOCATION: 138 N. Arroyo Seco Street, Lone, CA 95640 The City of lone is inviting you to a scheduled Zoom meeting.
Join Zoom Meeting
https://zoom.us/j/2351961316?pwd=d31WTW0zbVJLblpQNXBDQWtpZkRyU109 Meeting ID: 235 196 1316
Passcode: 95640
AT 1E. MAIN STREET, IONE, CA 95640
AND VIA ZOOM
Wednesday, October 30, 2024
A. ROLL CALL
B. PLEDGE OF ALLEGIANCE
C. PUBLIC COMMENT: EACH SPEAKER IS LIMITED TO 4 MINUTES NOTE: This is the time for members of the public who wish to be heard on matters that do not appear on the Agenda. Persons may address the City Council at this time on any subject within the jurisdiction of the lone City Council.
D. REGULAR MEETING:
1. Approve Purchase of Flow Meter for Wastewater Treatment Plant E. CLOSED SESSION:
CONFERENCE WITH REAL PROPERTY NEGOTIATORS:
Property: 1000 Castle Oaks Drive (APN: 005-320-034)
Agency Negotiator: George Lee, City Manager
Negotiating Parties: Hahn Family Foundation
Under Negotiation: Price and Terms of Payment
F. REPORT OUT OF CLOSED SESSION
G. ADJOURNMENT
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MA 5100 W
Overview Application
The main applications of the SITRANS FM electromagnetic flow sensors can be found in the following fields:
• Water abstraction
• Water treatment
• Water distribution network (leak detection management) • Custody transfer water meters
• Irrigation
• Waste water treatment
• Filtration plant (e.g. reverse osmosis and ultra filtration) 3 • Industrial water applications
Mode of operation
The flow measuring principle is based on Faradays law of elec- tromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to the velocity of The SITRANS FM MAG 5100 W is an electromagnetic flow sen- sor designed to meet ground water, drinking water, waste water, sewage or sludge applications. Integration
The complete flow meter consists of a flow sensor and an asso- Benefits ciated transmitter SITRANS FM MAG 5000, MAG 6000 or MAG 60001.
• DN 15 to DN 1200/2000 (½" to 48"/78*)
• Stock program of MAG 5100W secures short delivery time • Connection flanges EN 1092-1 (DIN 2501), ANSI, AWWA, AS and JIS
• NBR Hard Rubber and Ebonite Hard Rubber liner for all water applications
• EPDM liner with drinking water approvals
• Hastelloy integrated grounding and measuring electrodes • Increased low flow accuracy for water leak detection, due to coned liner design.
• Drinking water approvals
• Suitable for direct burial and constant flooding
• Custody transfer approvals
• Built-in length according to ISO 20456; the standard includes sizes up to DN 400.
• Easy commissioning, SENSORPROM unit automatically up- loads calibration values and settings.
• Designed so patented in-situ verification can be conducted.
Using SENSORPROM fingerprint.
• Custody transfer option for water billing, with type approval after OIML R 49 and verified according to MI-001 - OD inlet/ OD outlet installation
- Pattern approval OIML R 49
- Conform to ISO 4064 and EN 14154 for mechanical flowme- ters
- PTB K7.2
- Kiwa water approval
• FM Fire Service Meter (Class Number 1044) for automatic fire protection systems.
• Meets EEC directives: PED 2014/68/EU pressure directive for EN 1092-1 flanges
• Simple onsite or factory upgrade to IP68/NEMA 6P of a stan- dard sensor
• Type approval of marine equipment (ABS, Bureau Veritas, DNV-GL, Lloyd's Register)
Siemens Fl 01 - 2021 3/91
© Siemens 2020
Flow Measurement
SITRANS FM (eletromagnetic)
Flow sensors
MAG 5100 W
Technical specifications
Product characteristic MAG 5100W (7ME6520) MAG 5100W (7ME6580) Mainly for the European market Mainly for the non-European market EPDM or NBR lining Ebonite lining
Design and nominal size Coned sensor (octagon liner): DN 15 ... 40 (½" ... 1½*) Coned sensor: DN 50 .... 300 (2" ... 12") Full bore sensor: DN 25 ... 2 000 (1" ... 78") Full bore sensor: DN 350 ... 1200 (14" ... 48°)
Measuring principle Eletromagnetic induction Electromagnetic induction Excitation frequency DN 15 ... 65 (½" ... 2½"): 12.5 Hz/15 Hz DN 25 .... 65 (1' ... 2"): 12.5 Hz/15 Hz (Mains supply: 50/60 Hz)
DN 80 ... 150 (3" ... 6"): 6.25 Hz/7.5 Hz DN 80 ... 150 (3" ... 6"): 6.25 Hz/7.5 Hz DN 200 ... 300 (8" ... 12°): 3.125 Hz/3.75 Hz DN 200 ... 300 (8" ... 12"): 3.125 Hz/3.75 Hz DN 350 ... 1200 (14" ... 48°):1.5625 Hz/1.875 Hz DN 350 ... 2000 (14" ... 78"):1.5625 Hz/1.875 Hz Process connection
Flanges")
• EN 1092-1 PN 10 (145 psi): DN 200 ... 300 (8" ... 12*) Flat face Raised face) (EN 1092-1, DIN 2501 and BS 4504 have the same mating dimensions)
PN 10 (145 psi): DN 350 ... 1200 (14"... 48*) Raised face) PN 6 (87 psi): DN 1400 ... 2000 (54" ... 78") PN 16 (232 psi): DN 50 ... 300 (2" ... 12") Flat face3) PN 10 (145 psi): DN 200 ... 2000 (8" ... 78") PN 16 (232 psi): DN 350 ... 1200 (14" ... 48") Raised face PN 16 (232 psi): DN 65 ... 600 (2½' ... 24") PN 40 (580 psi): DN 15 ... 40 (½" ... 1%") Flat face PN 40 (580 psi): DN 25 .. 50 (1" ... 2") • ANSI B16.5 Class 150: ½" ... 12" Flat face; Class 150: 1" ... 24": Raised face 14" ... 24" raised face
• AWWA C-207 Class D: 28" ... 48", Flat face Class D: 28' ... 78", Flat face • AS4087 PN 16 (232 psi): PN 16 (232 psi)
DN 50 ... DN 300 (2 12") -lat Face DN 50 ... DN 1200 (2" ... 48") Raised face ON 350 ... DN 1200 (14" ... 48") Raised face
• JIS B 2220:2004 K10 (1" ... 24") K10 (1" ... 24")
Rated Operation conditions
Ambient temperature
• Sensor -40 ... +70 °C (-40 ... + 158 °F) -40 ... +70 °C (-40 + 158 °F) • Compact with transmitte -20 ... +60 °C (-4.... +140 °F) -20 ... +60 °C (-4 +140 °F) AG 5000/6000
DN 25 ... 50 (1")
580 psi) 0.01 ... 40 bar (0.15 ... 580 psi)
sure depending on flange standard,
decreases with increasing operating DN 65 ... 200 (2% .. .. 24290 ps) 0.01
48"): DN 1400 ...
D. .... a 01. ... 232 psi) DN 1.0. (05415 ps))
Enclosure rating
• Standard IP67 to EN 60529/NEMA 4X/6 (1 mH20 for 30 min IP67 to EN 60529/NEMA 4X/6 (1 mH,O for 30 min) • Option P68 to EN 60529/NEMA 6P (10 mHO continuously IP68 to EN 60529/NEMA 6P (10 mH2O continuously) Pressure drop Insignificant
1 15 and 25 (/" and 1): Max. 20 mbar (0.29 psi) at
1 40 ... 300 (1½" ... 12°): Max. 25 mbar (0.36 psi)
n/c (10 f
DN 350 ... 1200 (14" ... 48"): Insignificant
Test pressure 1.5 x PN (where applicable) FM Fire Service: 2 x PN 1.5 x PN (where applicable) Mechanical load (vibration) ,... 1000 Hz random in x, y, z, directions for 2 hou 18 ... 1000 Hz random in x, y, z, directions for 2 hours cording to EN 60068-2-3 according to EN 60068-2-36
Sensor: 3.17 g RMS Sensor: 3.17 g RMS
Ser: 3057 gh compact MAG 5000/6000 mounted transmit- Sensor with compact MAG 5000/6000 mounted transmit- ter: 3.17 g RMS
5.14 gr with compact MAG 6000 | mounted transmitter: Sensor with compact MAG 6000 | mounted transmitter:
1.14 g RMS
Medium conditions
Temperature of medium
• NBR -10 .. +70 °C (14 ... 158 °F)
• EPDN -10 ... +70 °C (14 ... 158 °F)
: EDOM (M-01) 0.1 .... 30 °C (32... 76 °F)
-10 ... +70 °C (14 ... 158 °F)
EMC 2014/30/EU 2014/30/EU
3/92 Siemens Fl 01 . 2021
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 W
Technical specifications (continued)
Product characteristic MAG 5100W(7ME6520) MAG 5100W(7ME6580) Mainly for the European market Mainly for the non-European market EPDM or NBR lining Ebonite lining
Design
Materiai
• Housing and flanges Carbon steel ASTM A 105, with corrosion-resistant coatin- Carbon steel ASTM A 105, with corrosion-resistant coating gof category C4 or C5 according to ISO 12944-2 of category C4 or C5 according to ISO 12944-2 • Electrode Hastelloy C276 Hastelloy C276
• Grounding electrode Hastelloy C276 Hastelloy C276
• Terminal box Fibre glass reinforced polyamide Fibre glass reinforced polyamide 3 Certificates and approvals
Calibration
• Default calibration Zero-point, 2 × 25% and 2 x 90 % Zero-point, 2 x 25 % and 2 x 90 % • Special calibration 5-point calibration: 20%, 40 %, 60 %, 80 %, 100% of fac- 5-point calibration: 20 %, 40 %, 60 %, 80 %, 100% of fac- tory Qmax tory Qmax
10-point calibration: ascending and descending at 20 %, 0-point calibration: ascending and descending at 20 % 40%, 60%, 80%, 100% of factory Qmax 10%, 50%, 80%, 100% of factory Oma Matched pair calibration: default, 5-point or 10-point Matched pair calibration: default, 5-point or 10-point Custody transfer
Drinking water
NRAS (WRc, BS690 cold water, G
VSF/ANSI Standard 616) (Cold water, L
ACS listed (F)
• ASINZS 4020 Australia/New Zealand)
Marine? • Bureau Vertreau of Shipping (ABS)
DNV-GI
Lloyd's Registe
Hazardous areas?
andard sensor with/withi • FM • FM
AG 5000/6000/600 - NI Class I Div. 2 Groups A, B, C, D
- NI Class I Zone 2 Groups IIC - NI Cass one Group B. CID Pressure equipment • PED DN 300 4 425 209211/2035 ges and ANSI Class • CRN
Others EAC (Russia, Belarus, Kazakhsta • EAC (Russia, Belarus, Kazakhstan) KCC (South Korea • CMC/CPA (China)
• MCERTS (GB environmental
1) DN 750, DN 1050 and DN 1100(30", 42" and 44*) not available with EN 1092-1 (PN 10 and PN 16) and AS4087 flanges 2) Type 01 (SORF)
3) DN ≤ 600 type 01 (SORF); DN > 600 type 11 (WNRF)
4) Compact with transmitter MAG 5000 CT/6000 CT -20 ... +50 °C (-4... 122 °F) 5) For verification submit Product Variation Request
6) Including Annex G
1) In remote version with sensor size DN 50 ... DN 300 (2"... 12") 8) and i aprova. Al products sold pulse of El and El A are sclude from te dire clive, also produces sinto cerain market sectors a lee a) Meters used in networks for the supply, distribution and discharge of water. b) Meters used in pipelines for the conveyance of any fluid from offshore to onshore. c) Meters used in the extraction of petroleum or gas, including Christmas tree and manifold equipment. d) Any meter mounted on a ship or mobile offshore platform. For further information on the PED standard and requirements see Pressure Equipment Directive in Appendix (chapter 10).
9) Not for sensors with 300 um coating.
Siemens Fl 01. 2021 3/93
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 W
Technical specifications (continued)
MAG 5100W (7ME6520) with MAG 6000 CT MAG 5100(7ME6520) with MAG 5000/MAG 6000 or (Revenue program) MI-001 MAG 6000 CT for Fire Service applications MAG 5100 W CT program is type approved according to inter- MAG 5100W (7ME6520) is FM Fire Service approved for auto- national water meter standard OIML R 49. Since the first Novem- matic fire protection systems. The approval is applicable for the ber 2006 the Mi-001 water meter directive is in force, which sizes DN 50, DN 80, DN 100, DN 150, DN 200, DN 250 and DN means that all water meters can be sold across the EU borders 300 (2*, 3", 4", 6", 8", 10" and 12") with ANSI B16.5 Class 150 if the water meters contain a MI-001 label. flanges. The FM Fire Service approved product can be ordered via the Z-options P20, P21 and P22.
The MAG 5100 W MI-001 verified and labeled products are a Class Il approval according to Directive 2014/32/EU of the Euro- pean Parliament and Council of 26 February, 2014 on measuring ‡E% instruments, Annex III Water meters (MI-001) in the sizes from FM Fire Service verification tolerances DN 50 to DN 1200 (Article No. 7ME6520).
The MID certification is obtained as a modul B + D module ap- proval according to the above mentioned directive.
Module B: Type approval according to OIML R 49 - 1.5 %
Module D: Quality insurance approval of production
+E% MI-001 verification tolerances
CI. II = 5%
CI. II = 2%
.. =
Q3
3/94 Siemens Fl 01 - 2021
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 V
Technical specifications (continued)
MAG 5100W (7ME6520) MI-001 verified and labeled products at a given Q3 and Q3/Q4 = 1.25 and Q2/Q1 = 1.6 measuring ranges see table below:
Order code: P11 DN 50 (2") DN 65 (2%") DN 80 (3"') DN 100 (4") DN 125 (5"') DN 150 (6") DN 200 (8"') DN 250 (10") DN 300 (12") "R" Q3/Q1 40 40 40 40 40 40 40 40 40
04 [m/h] 20 31.25 50 78.75 125 200 312.5 500 787.5
Q3 [m /h] 16 25 40 63 100 160 250 400 630
Q2 [m*/] 0.64 1.0 1.6 2.52 4.0 6.4 10.0 16.0 25.2
Q1 [m/h] 0.4 0.63 1.0 1.58 2.5 4.0 6.25 10.0 15.75
3 Order code: P12 DN 50 (2") DN 65(2½") DN 80 (3") DN 100 (4"') DN 125 (5") DN 150 (6") DN 200 (8"') DN 250 (10"') DN 300 (12") "R" Q3/Q1 63 63 63 63 63 63 63 63 63
Q4 [m/h] 20 31.25 50 78.75 125 200 312.5 500 787.5
Q3 [m/h] 16 25 40 63 100 160 250 400 630
02 m3] 0.41 0.63 1.02 1.6 2.5 4.1 6.3 10.2 16.0
0.25 0.40 0.63 1.00 1.59 2.54 3.97 6.35 10.0
Order code: P13 DN 50 (2") DN 65 (2%") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") "R" Q3/Q1 80 80 80 80 80 80 80 80 80
20 31.3 50 78.75 125 200 312.5 500 787.5
Q3 [m/] 16 25 40 63 100 160 250 400 630
Q2 [m/h] 0.32 0.5 0.8 1.26 2.0 3.2 5.0 8.0 12,6
Q1 [m?/] 0.20 0.31 0.50 0.79 1.25 2.00 3.13 5.00 7.9
Order code: P16 DN 50 (2") DN 65 (2½") DN 80 (3"') DN 100 (4") DN 125 (5"') DN 150 (6") DN 200 (8") DN 250(10") DN 300 (12"') "R" Q3/Q1 160 160 160 160 160 160 160 160 160
04 [m/h] 50 78.5 125 200 312.5 500 787.5 1250 2000
Q3 [m/h] 40 63 100 160 250 400 630 1000 1600
02 [m/] 0.4 0.63 1.0 1.6 2.5 4.0 6.3 10.0 16.0
Q1 [m*/h] 0.25 0.39 0.63 1.0 1.56 2.5 3.94 6.3 10.0
Order code: P17 DN 50(2") DN 65 (2½") DN 80 (3"') DN 100 (4") DN 125 (5") DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") "R" Q3/Q1 200 200 200 200 200 200 200 200 200
Q4 [me/h] 50 78.5 125 200 312.5 500 787.5 1250 2000
03 [m/] 40 63 100 160 250 400 630 1000 1600
02 [m/] 0.32 0.50 0.80 1.28 2.0 3.2 5.0 8.0 12.8
0.2 0.32 0.50 0.8 1.25 2.0 3.15 5.0 8.0
Order code: P18 DN 50 (2") DN 65 (2%") DN 80 (3") DN 100 (4") DN 125 (5") DN 150 (6") DN 200(8") DN 250 (10") | DN 300 (12"') "R" Q3/Q1 250 250 250 250 250 250 250 250 250
78.5 125 200 312.5 500 787.5 1250 2000
40 63 100 160 250 400 630 1000 1600
02 [m/] 0.26 0.4 0.64 1.02 1.6 2.56 4.0 6.4 10.24
0.16 0.25 0.4 0.64 1.0 1.6 2.52 4.0 6.4
Order code: P24 DN 350 (14") DN 400(16") DN 450(18") DN 500(20") DN 600 (24") R03/01 40 40 40 40 40
1250 1250 2000 2000 3125
03 [m/h] 1000 1000 1600 1600 2500
Q2 [m/h] 40.0 40.0 64.0 64.0 100.0
25.0 25.0 40.0 40.0 62.5
Order code: P25 DN 350 (14") DN 400 (16") DN 450 (18"*) DN 500 (20") DN 600(244) 63 63 63 63 63
1250 2000 3125 3125 5000
03 [m/] 1000 1600 2500 2500 4000
Q2[m/n] 25.4 40.63 63.49 63.49 101.6
15.9 25.4 39.7 39.7 63.49
Siemens FI 01 - 2021 3/95
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAN 5100 W
Technical specifications (continued)
Order code: P26 DN 350 (14") DN 400 (16") DN 450(18") DN 500 (20") DN 600 (24") "R" Q3/Q1 80 80 80 80 80
Q4 [m /h] 2000 3125 5000 5000 7875
1600 2500 4000 4000 6300
Q2 [m/h] 32.0 50.0 80.0 80.0 126.0
Q1 [m/h] 20.0 31.25 50.0 50.0 78.75
Order code: P27 DN 350 (14") DN 400(16"*) DN 450(18") DN 500 (20") DN 600 (24") "R" 03/Q1 100 100 100 100 100
3 Q4 [m*/h) 3125 3125 5000 5000 7875
Q3 [m/h] 2500 2500 4000 4000 6300
Q2 [m*/h] 40.0 2540.0 64.0 64.0 100.8
Q1 [m*/h] 25.0 25.0 40.0 40.0 63.0
Order code: P29 DN 700(28"*) DN 750 (30"*) DN 800 (32"*) DN 900(36) DN 1000 (40") DN 1200(48") 03/01 40 40 40 40 40 40
04 [m%] 5000 5000 5000 7875 7875 7875
03 [ma/h] 4000 4000 4000 6300 6300 6300
02[m/h] 160.0 160.0 160.0 252.0 252.0 252.0
Q1 [m/h] 100.0 100.0 100.0 157.5 157.5 157.5
Order code: P30 DN 700 (28") DN 750 (30"*) DN 800 (32"') DN 900 (36") DN 1000 (40") "R" 03/Q1 63 63 63 63 63
Q4 [m/h] 5000 5000 5000 7875 7875
4000 4000 4000 6300 6300
101.6 101.6 101.6 160.0 160.0
01[m/n) 63.5 63.5 63.5 100.0 100.0
Order code: P31 DN 700 (28") DN 750 (30") DN 800 (32") DN 900(36) DN 1000(40") DN 1200 (48"*) "R" 03/Q1 80 80 80 80 80
Q4 [m/h) 5000 5000 5000 7875 7875
4000 4000 4000 6300 6300
80.0 80.0 80.0 126.0 126.0
Q1 [m?/) 50.0 50.0 50.0 78.75 78.75
The label is placed on the transmitter housing. An example of the OIML R 49/MI-001 approvals valid for:
product label is shown below: • DN 50 to 1200 mm (2" to 48") • Horizontal and vertical installation
SIEMENS • Compact or remote with max. 500 m cable
SITRANS F M MAG 6000 / 5100W CT • Power supply 115 to 230 V AC, 12 to 24 V AC/DC Order No.: 7ME65204B132MA1-Z Supply: 115-230V AC • With or without communication module P11 Certification No.: K- 0200-MI001-00
Serial No.: 157802H502 Accuracy: lass 2 OIL R4 Other restrictions may apply (see certificate) 200 (8in.) EN 1092 - 1, PN 10
Software version: IKE
Meteorientation: Year: 2013
Environmental Class: E2, 03: 250 m3/h 03/01:25 Special OIML / MI-001 settings:
Pressure max.: PN 10
Temp. max.: 30°C СЄ МІЗ 0200 • Unit: ma
Amb. Temp.: -25° to + 55° C
• Qmax: Q3
Siemens A/S, Flow Instruments 6400 Soenderborg, Denmark • Low flow cut-off: 0.1 %
Made in France
• Digital output: Frequency
For other factory settings, see Operating Instructions. 3/96 Siemens FI 01 . 2021
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 W
Selection and ordering data Article No. Article No.
Sensor SITRANS FM MAG 5100 W 7 7ME6520- Ord. Sensor SITRANS FM MAG 5100 W 7ME6520- Ord. code code
Hastelloy electrodes, carbon steel flanges. Hastelloy electrodes, carbon steel flanges, EU water markets and low flow applications - 2 EU water markets and low flow applications / Click on the Article No. for the online Transmitter
configuration in the PIA Life Cycle Portal. Sensor for remote transmitter Diameter (Order transmitter separately)
DN 15 (/2 ) 1V MAG 60001, Aluminum, 18...90 DC,
115... 230 VAC
DN 25 (1ª) 2 D
MAG 6000, Polyamid, H
DN 40 (1½*) 2 R 11 ... 30 V DC/11 ... 24 V AC
DN 50 (2"') 2 Y MAG 6000, Polyamid, 115 ... 230 V AC
DN 65 (2½*) 3 F MAG 5000, Polyamid, K
DN 80 (3") 3 M 11 ... 30 V DC/11 ... 24 V AC
DN 100 (4") 3 T MAG 5000, Polyamid, 115 ... 230 V AC L
DN 125 (5") 4 B MAG 6000 CT, Polyamid, 115 ... 230 VAC M DN 150(6*) 4 H MAG 6000 CT, Polyamid, R
11 ... 30 V DC/11 ... 24 VAC
DN 200 (8") 4 P
Transmitter including wall-mounting kit for
DN 250 (10") 4V remote design
DN 300 (12") 5 D MAG 5000, Polyamid, 115 ... 230 V AC, incl.
DN 350 (14") 5 K special wall-mounting unit (approved marine equipment)
DN 400 (16"') 5 R • M20x1.5 cable glands
POC
DN 450 (18") 5 Y • ½* NPT cable glands
POD
DN 500 (20") 6 F
MAG 6000, Polyamid, 115 ... 230 V AC, incl.
DN 600 (24") 6 P special wall-mounting unit (approved marine DN 700 (28") 6Y equipment)
• M20x1.5 cable glands POG
DN 750 (30") 7 D
• ½' NPT cable glands z POH
DN 800 (32") 7 H
DN 900 (36") 7 M MAG 6000 CT, Polyamid
11 ... 30 V DC/11 .... 24 VAC,
DN 1000 (40") 7 R incl. wall-mounting unit
(42") 7U • M20x1.5 cable glands POJ
(44") 7V • ½° NPT cable glands POK
DN 1200 (48") 8 B MAG 6000 CT, Polyamid, 115 ... 230 VAC, Flange norm and pressure rating inci. wall-mounting unit • M20x1.5 cable glands POL
EN 1092-1
• ½" NPT cable glands POM
PN 10 (DN 200 ... 1200/8"... 48")
PN 16 (DN 50 ... 1200/2" ... 48") Communication
PN 16, non PED (DN 700 ... 1200/28" ... 48") None A
HART
PN 40 (DN 15 ... 40/½" ... 1½*) m u
PROFIBUS PA Profile 3
ANSI B16.5 (only MAG 6000/ MAG 6000)
class 150 (½" ... 24") J
POT MAD MAG 60001) G
AWWA C-207
Class D (28" ... 48") L E
only MAG 6000 MG 6000 1)
AS 4087
J
PN 16 (DN 50 ... 1200/2"... 48") N
JIS Cable glands/terminal box
B 2220:2004 K10 (1" ... 24") R
letric: Polyamide terminal box o 1
Flange material and coating
Carbon steel fianaes ASTM A 105. 2" NPT: Polyamide terminal box c 2 corrosion-resistant coating of category C4 MAG 6000 | compac arbon steel flanges ASTM A 105, 300 un
orrosion-resistant coating of category C
Liner material
EPDM
NBR
Siemens Fl 01 • 2021 3/97
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 W
Selection and ordering data Order code Order code
Addilional information
Please add "-Z" to Article No. and specify Order Please add "-Z" to Article No. and specify Order code(s) and plain text. code(s) and plain text.
Certificates Approval/Verification)
• Pressure test certificate according to C01 • Without verification acc. to OIML R 49 (DN 50 ... DN P10 EN 10204-3.1
• Material certificate according to EN 10204-3.1 C12 • MI-001 Q3/Q1 = 40 (DN 50 ... DN 300) P11 • Factory certificate according to EN 10204-2.2 C14 • MI-001 Q3/Q1 = 63 (DN 50 ... DN 300) P12 • Factory certificate according to EN 10204-2.1 C15 • MI-001 Q3/Q1 = 80 (DN 50 ... DN 300) P13 • MI-001 Q3/Q1 = 160 (DN 50 ... DN 300) P16
Special calibration
• 5-point calibration for DN 15... DN 200" D01 • MI-001 Q3/Q1 = 200 (DN 50 ... DN 300) P17 • 5-point calibration for DN 250 ... DN 6001) • MI-001 Q3/Q1 = 250 (DN 50 ... DN 300) P18 D02
• 5-point calibration for DN 700 ... DN 12001) • Without verification according to OIML R 49 P23 D03
• 10-point calibration for DN 15 ... DN 2002) D06 • MI-001 Q3/Q1 = 40 (DN 350 ... DN 600) P24
• 10-point calibration for DN 250 ... DN 6002) DOZ • MI-001 Q3/Q1 = 63 (DN 350 ... DN 600) P25
• 10-point calibration for DN 700 ... DN 12002) D08
• MI-001 Q3/Q1 = 80 (DN 350 ... DN 600) P26
• Default (2x25% and 2x90 %) matched-pair D11
• MI-001 Q3/Q1 = 100 (DN 350 ... DN 600) P27
calibration for DN 15 ... DN 200
D12 • Without verification according to OIML R 49 P28
• Default (2 x 25% and 2 x 90 %) matched-pair (DN 700 ... DN 1200) calibration for DN 250 ... DN 600
• Default (2x x and and 2x90%) matched-pair • MI-001 Q3/Q1 = 40 (DN 700 ... DN 1200) P29 D13
calibration for DN 700 ... DN 1200 • MI-001 Q3/Q1 = 63 (DN 700... DN 1200) P30 • 5-point, matched- D15 • MI-001 Q3/Q1 = 80 (DN 700 ... DN 1200) P31 ONTE... DNa pair calibration for • PTB K7.2 QP/QI=25 (DN 15 ... DN 300) P41 • 5-point, matched-pair calibr. for DN 250 ... DN 6001) D16 • PTB K7.2 QP/Q|=50 (DN 15 ... DN 300) P42 • 5-point, matched-pair calibr. fo D17 • PTB K7.2 QP/QI= 100 Low dynamic range P43 ON 700 ... DN 1200"
• 10-point, matched-pair calibration fo D18 • PTB K7.2 QP/QI= 100 High dynamic range P44 ON 15 ... DN 2002) (DN 15 ... DN 300)
• 10-point, matched-pair calibr. toi D19 • PTB K7.2 QP/QI=250 (DN 50 ... DN 300) P45 ON 250 DN 600° • PTB K7.2 QP/QI=25 (DN 350 ... DN 600) P47 • 10-point, matched-pair calibr. fol D20 • PTB K7.2 QP/QI=50 (DN 350 ... DN 600) P48 ON 700 ... DN 1200° • PTB K7.2 QP/QI= 100 Low dynamic range P49 • Accredited 5-point matched-pair calibration D21 (DN 350... DN 600) acc. to ISO 17025 DN 15 ... DN 200
Pulse output setting
• Accredited 5-point matched-pair calibration D22
acc. to ISO 17025 DN 250 ... DN 600 Volume / Pulse
• Accredited 5-point matched-pair calibration D23 • 0.001 I/pulse L01 acc. to ISO 17025 DN 600 ... DN 1200 • 0.01 l/pulse L02 Country of origin • 0.1 l/pulse L03
• France F55 • 0.5 l/pulse L04
• 1 l/pulse L05
Sensor cables • 5 l/pulse L06
• Standard coil and electrode cable, PVC jacket • 10 l/pulse L07 - 5 m (16 ft) K01
• 50 l/pulse L08
- 10 m (33 ft) K02 • 100 l/pulse L09
- 20 m (65 ft) K04 • 500 l/pulse L10
- 30 m (98 ft) K06 • 1 moulse i L11
- 40 m (131 ft) K07 L12
• 5m/pulse
- 50 m (164 ft) K08 • 10m/pulse L13
K09 • 50 m/pulse L14
100 m (328 f K10 • 100 m/pulse L15
150 m (492 f K11
• 500m/pulse L16
- 200m (1640)) • 1000 m /pulse L17
L17
Pulse width
• Sac lard coil and special elecirode cable. • 2 ms L61 K51 • 5 ms L62
5m (16 1
10 m (33 • 10 ms L63
20 m (65 ft) • 20 ms L64
0 m (98 1 • 50 ms L65
1m/121 • 100 ms L66
• 200 ms L67
• 500 ms L68
• 10 42 2) •M Fire Service Approva
K61 with ANSI B16.5 Class 150 flanges
- 300m m(1540)) K62 • DN 50, DN 80 and DN 100 (2*, 3" and 4") P20 K63 • DN 150 and DN 200 (6" and 8") P21
Terminal blocks • DN 250 and DN 300 (10' and 12") P22
• Factory mounted terminal blocks N02
3/98 Siemens Fl 01 - 2021
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 V
Selection and ordering data Article No. Article No.
Sensor SITRANS FM MAG 5100 W 7ME6580-
Please add "-Z" to Article No. and specify Order Hastelloy electrodes, carbon steel flanges, code(s) and plain text. Non EU water markets
Country specific label Order code Flange norm and pressure rating FP2E label (France) H20 EN 1092-1
ADDC label (Abu Dhabi) H23 PN 6 (DN 1400 ... 2000 (54"... 78"))" CRN (Canadian Registration Number) H25 PN 10 (DN 200... 2000(8"... 78"))" B Tag name plate, stainless steel (specify in plain text) Y17 PN 16 (DN 65 ... 600 (2½" ... 24")) Y18 PN 16, non-PED (DN 700 ... 2000 (28" ... 78") D
Tag name plate, plastic (self-adhesive) 3
Customer-specific transmitter setting Y20 PN 40 (DN 25 ... 50 (1"... 2")) ANSI B16.5
Factory mounted sensor cables
• Sensor cables wired (specify Article No. for sensor Y40 Class 150 (1" ... 24") J cables and order cables separately or specify K-op- AWWA C-207 tion)
Class D (28"... 78"1) L
• Sensor cables wired and IP68 sealing (specify Arti- Y41 cle No. for sensor cables and order cables separate- AS 4087 ly or specify K-option) N
PN 16 (DN 50 ... 1200 (2"... 48")
JIS
• Customer-witnessed calibration On request*)
Any of above calibration В 2220:2004 K10 (1" ... 24") R 1) 20%, 40%, 60%, 80%, 100% of factory Omax Flange material and coating Carbon steel flanges ASTM A 105, 1
2) Ascending and descending at 20%, 40%, 60 %, 80%, 100% of factory corrosion-resistant coating of category C4 Qmax
3) For more details and references of the ranges please see the tables on Carbon steel flanges ASTM A 105, 300 um 4 page 3/95. corrosion-resistant coating of category C5
4) Product Variation Request (PVR) Liner material
Ebonite
Electrode material
Sensor SITRANS FM MAG 5100 W 7 7ME6580- Hastelloy 2
Hastelloy electrodes, carbon steel flanges, Transmitter Non EU water markets Sensor for remote transmitter (Order transmitter sep- 7 Click on the Article No. for the online arately)
configuration in the PIA Life Cycle Portal. MAG 6000, Polyamid, 11 ... 30 V DC/11 ... 24 V AC H Diameter MAG 6000, Polyamid, 115 ... 230 V AC J
DN 25 (1") 2 D MAG 5000, Polyamid, 11 ... 30 V DC/11 ... 24 V AC DN 40 (1½") 2 R MAG 5000, Polyamid, 115 ... 230 V AC
DN 50 (2") 2 Y Communication
DN 65 (2½") 3 F No communication, add-on possible
DN 80 (3") 3 М HART
DN 100 (4") 3 т PROFIBUS PA Profile 3 (only MAG 6000)
DN 125(5) 4 B PROFIBUS DP Profile 3 (only MAG 6000)
G
DN 150 (6") 4 H Modbus RTU/RS 485 (only MAG 6000) E
DN 200 (8") 4 P FOUNDATION Fieldbus H1 (only MAG 6000) J DN 250(10") 4 V Cable glands/terminal box
DN 300 (12") 5 D Metric: Polyamide terminal box or MAG 6000 | com- 1 DN 350 (14") 5 K pact
DN 400 (16") 5 R ½" NPT: Polyamide terminal box or MAG 6000 | com- 2 pact
DN 450 (18")
DN 500 (20") 1) DN 1400 to DN 2000 (54" to 78') do not conform to PED or CRN.
DN 600 (24")
DN 700 (28")
DN 750 (30") D
DN 800(32") H
DN 900(36")
DN 1000 (40")
DN 1050 (42")
DN 1100(44")
DN 1200 (48")
DN 1400 (54")
DN 1500 (60") 8 K
DN 1600 (66") 8
DN 1800(72") 8 T
DN 2000 (78") 8
Siemens Fl 01. 2021 3/99
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100
Selection and ordering data Order code
Operating instructions for SITRANS FM MAG 5100 W
Please add "-Z" to Article No. and specify Order Description Article No. code(s) and plain text.
• English A5E03063678
Certificates
• German A5E03376527
Pressure test certificale according to EN 10204-3.1 C01 Factory certificate according to EN 10204-2.2 C14 All literature is available to download for free, in a range of lan- guages, at
Factory certificate according to EN 10204-2.1 C15
http://www.siemens.com/processinstrumentation/dlocumentation Special calibration
• 5-point calibration for DN 15 ... DN 200t)) D01 Accessories • 5-point calibration for DN 250 ... DN 6001) D02
• 5-point calibration for DN 700... DN 1200) Description Article No.
D03
• 10-point calibration for DN 15 ... DN 2002) D06 Potting kit for IP68/NEMA GP FDK:085U0220 • 10-point calibration for DN 250 ... DN 6002) D07 sealing of sensor junction box • 10-point calibration for DN 700 ... DN 12002) D08
• Default (2 x 25% and 2 x 90%) match-pair D11
calibration for DN 15 ... DN 200
• Default (2 x 25% and 2 x 90 %) match-pair D12
calibration for DN 250 ... DN 600
• Default (2 x 25% and 2 x 90 %) match-pair D13
calibration for DN 700 ... DN 1200 MAG 5000/6000 transmitters and sensors are packed in sepa- • 5-point, matched-pair calibration for D15
rate boxes, the final assembly takes place during installation at DN 15 ... DN 200
the customer's place. MAG 6000 I transmitters and sensors are 5-point, matched-pair calibration fo D16
IN 250. DN 600' delivered compact mounted from factory. Communication mod- • 5-point, matched-pair calibration for D17 ule will be pre-mounted in the transmitter.
DN 700 ... DN 1200)
Please use online Product selector to get latest updates:
• 10-point, matched D18
ON 15... DNa pair calibration for
http://www.pia-selector.automation.siemens.com
D19
• D 210m 600-pair calibration for
DN 250
• 10-point, matched-pair calibration for D20
DN 700 ... DN 12004
Terminal blocks
• Factory mounted terminal blocks N02
Country specific label
CRN (Canadian Registration Number) H25
Tag name plate, stainless (specify in plain text) Y17
Tag name plate, plastic (self-adhesive) Y18
Customer-specific transmitter setting Y20
Factory mounted sensor cables
• Sensor cables wired (specify Article No. for sensor Y40 cables and order cables separately)
• Sensor cables wired and IP68 sealing (specify
Article No. for sensor cables and order cables sep-
1) 20%, 40%, 60%, 80%, 100% of factory Qmax
2) Ascending and descending at 20%, 40%, 60%, 80%, 100% of factory Qmax
3/100 Siemens Fl 01 - 2021
© Siemens 2020
Flow Measurement
SITRANS FM (eletromagnetic)
Flow sensors
MAC 5100 W
Dimensional drawings
155 (6.10) 155 (6.10)
155(6.10)
- 178 (7.01) -• - 178(7.01)→ 178(7.01)
M20 M20 M20
(½" NPT) (½" NPT) (½" NPT)
3 D1
7ME6520: DN 15 ... 40 (½" ... 1½") 7ME6520: DN 50 .. 300 (2"…. 12") 7ME6520: DN 350 ... 1200 (14" ... 48") 7ME6580: DN 25 ... 2000 (1" ... 78")
7ME6520 NBR or EPDM liner 7ME6580 Ebonite liner
Nominal size A D1 A D1 L"
[mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] 15 177 7.0 77 3.0 200 7.9
25 187 7.4 96 3.8 187 7.4 104 4.09 200 7.9
40 1½ 202 8.0 127฿ 5.0 197 7.8 124 4.88 200 7.9
50 2 188 7.4 76 3.0 205 8.1 139 5.47 200 7.9
65 2½ 194 7.6 89 3.5 212 8.3 154 6.06 200 7.9
80 200 7.9 102 4.0 222 8.7 174 6.85 200 7.9
100 207 8.1 114 4.5 242 9.5 214 8.43 250 9.8
125 217 8.5 140฿ 5.5 255 10.0 239 9.41 250 9.8
150 232 9.1 168 6.6 276 10.9 282 11.1 300 11.8
200 257 10.1 219 8.6 304 12.0 338 13.31 350 13.8
250 10 284฿ 11.2 273 10.8 332 13.1 393 15.47 450 17.7
300 12 310 12.2 324 12.8 357 14.1 444 17.48 500 19.7
350 14 382 15.0 451 17.8 362 14.3 451 17.76 550 21.7
400 16 407 16.0 502 19.8 387 15.2 502 19,76 600 23.6
450 18 438 17.2 563 22.2 418 16.5 563 22.16 600 23.6
500 20 463 18.2 614 24.2 443 17.4 614 24.17 600 23.6
600 24 514 20.2 715 28.2 494 19.4 715 28.15 600 23.6
700 28 564฿ 22.2 816 32.1 544 21.4 816 32.13 700 27.6
750 30 591 23.3 869 34.2 571 22.5 869 34.21 750 29.5
800 32 616 24.3 927 36.5 606 23.9 927 36.5 800 31.5
900 36 663 26.1 1032 40.6 653 25.7 1032 40.63 900 35.4
1000 40 714 28.1 1136 44.7 704 27.7 1136 44.72 1000 39.4 42 714 28.1 1136 44.7 704 27.7 1136 44.72 1000 39.4
44 765 30.1 1238 48.7 755 29.7 1238 48.74 1100 43.3
1200 48 820 32.3 1348 53.1 810 31.9 1348 53.07 |1200 47.2 1400 54 925 36.4 1574 65.94 1400 55.1
1500 60 972 38.2 1672 65.83 1500 59.1
1600 66 1025 40.4 1774 75.39 1600 63.0
1800 72 1123 44.2 1974 77.72 1800 70.9
2000 78 1223 48.1 2174 85.59 2000 78.7
1) Tolerances on built-in length:
DN 15 to DN 200 (½" to 8'): +0/-3 mm (+0/-0.12*), DN 250 to DN 400 (10" to 16"): +0/-5 mm (+0/-0.20*).
DN 450 to DN 600 (18" to 24"): +5/-5 mm (+0.20/-0.20"), DN 700 to DN 2000 (28' to 78"): + 10/-10 mm (+0.39/-0.39") Siemens FI 01 - 2021 3/101
© Siemens 2020
Flow Measurement
SITRANS FM (eletromagnetic)
Flow sensors
MAG 5100 W
Dimensional drawings (continued)
MAG 5100 W/6000 | Compact
208(8.19) 208 (8.19)
208 (8.19)-
2 × M25 +- 155 (6.10) 2 × M25 + 155 (6.10) → 2x M25
155(6.10)-
M20 M20 M20
(½" NPT) (½" NPT) (½" NPT)
7ME6520: DN 15 ... 40 (½" ... 1½") 7ME6520: DN 50 ... 300 (2" ... 12") 7ME6520: DN 350 2000 (14" 78") 7ME6580: DN 25 ... 2000 (1" ... 78")
7ME6520 NBR or EPDM liner 7ME6580 Ebonite liner
Nominal size A1 D1 A1 D1 L1)
[mm] finch] [mm] [inch] [mm] [inch) [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] [[mm] [inch] 15 177 7.0 331 13.0 77 3.0 187 7.4 200 7.9
25 187 7.4 341 13.4 96 3.8 187 7.4 341 13.4 104฿ 4.09 200 7.9 40 1½ 202 8.0 356 14.0 127 5.0 197 7.8 351 13.8 124 4.88 200 7.9 50 2 188 7.4 342 13.5 76 3.0 205 8.1 359 14.1 139 5.47 200 7.9 65 2½½ 194 7.6 348 13.7 89 3.5 212 8.3 366 14.4 154 6.06 200 7.9 80 200 7.9 354 14.0 102 4.0 222 8.7 376 14.8 174 6.85 200 7.9 100 207 8.1 361 14.2 114 4.5 242 9.5 396 15.6 214 8.43 250 9.8 125 217 8.5 371 14.6 140 5.5 255 10.0 409 16.1 239 9.41 250 9.8 150 232 9.1 386 15.2 168 6.6 276 10.9 430 16.9 282 11.1 300 11.8 200 257 10.1 411 16.2 219 8.6 304 12.0 458 18.0 338 13.31 350 13.8 250 10 284 11.2 438 17.2 273 10.8 332 13.1 486 19.1 393 15.47 450 17.7 300 12 310 12.2 464 18.3 324 12.8 357 14.1 511 20.1 444 17.48 500 19.7 350 14 382 15.0 536 21.1 451 17.8 362 14.3 516 20.3 451 17.76 550 21.7 400 16 407 16.0 561 22.1 502 19.8 387 15.2 541 21.3 502 19.76 600 23.6 450 18 438 17.2 592 23.3 563 22.2 418 16.5 572 22.5 563 22.16 600 23.6 500 20 463 18.2 617 24.3 614 24.2 443 17.4 597 23.5 614 24.17 600 23.6 600 24 514 20.2 668 26.3 715 28.2 494 19.4 648 25.5 715 28.15 600 23.6 700 28 564 22.2 718฿ 28.3 816 32.1 544 21.4 698 27.5 816 32.13 700 27.6 750 30 591 23.3 745 29.3 869 34.2 571 22.5 725 28.5 869 34.21 750 29.5 800 32 616 24.3 770 30.3 927 36.5 606 23.9 760 29.9 927 36.5 800 31.5 900 36 663 26.1 817 32.2 1032 40.6 653 25.7 807 31,8 1032 40.63 900 35.4 1000 40 714 28.1 868 34.2 1136 44.7 704 27.7 858 33.8 1136 44.72 1000 39.4 42 714 28.1 868 34.2 1136 44.7 704 27.7 858 33.8 1136 44.72 1000 39.4 44 765 30.1 919 36.2 1238 48.7 755 29.7 904 35.6 1238 48.74 1100 43.3 1200 48 820 32.3 974 38.3 1348 53.1 810 31.9 964 38.0 1348 53.07 1200 47.2 1400 54 925 36.4 1079 42.5 1574 61.97 1400 55.1
1500 60 972 38.2 1126 44.3 1672 65.83 1500 59.1
1600 66 1025 40.4 1179 46.4 1774 59.84 1600 63.0
1800 72 1123 44.2 1277 50.3 1974 77.72 1800 70.9
2000 78 1223 48.1 1377 54.2 2174 85.59 2000 78.7
1) Tolerances on built in length:
DN 15 to DN 200 (½½" to 8"): +0/-3 mm (+0/-0.12"), DN 250 to DN 400 (10" to 16"): +0/-5 mm (+0/-0.20") DN 450 to DN 600 (18" to 24"): +5/-5 mm (+0.20/-0.20"), DN 700 to DN 2000 (28" to 78"): + 10/-10 mm (+0.39/-0.39") 102 Siemens FI 01 - 2021
© Siemens 2020
Flow Measurement
SITRANS FM (electromagnetic)
Flow sensors
MAG 5100 W
Dimensional drawings (continued)
7ME6520 7ME6580
NBR or EPDM liner Ebonite liner
Nominal size DN PN 10 PN 16 PN 40 Class 150/AWWA AS PN 16 JIS 10K [mm] [inch] [kg] [ibs] [kg] [ibs] [kg] [ibs] [kg] [ibs] [kg] [ibs] [kg] [ibs] [kg] [lbs] 15 5 11 4.18 9.22
25 12 11 11 5.68 12.52
40 1½ 18 15 15 17 7.52 16.58
50 20 20 20 9 20 8.18 18.03
65 2½ 10.7 24 11 24 10.7 24 11 24 9.44 20.81
80 11.6 26 13 28 11.6 26 12 26 10.46 23.06 3
100 15.2 33 19 41 15.2 33 16 35 13.7 30.20
125 20.4 45 24 52 19 42 |20.22 44.58
150 26 57 29 64 26 57 27 60 24.1 53.13
200 48 106 48 106 56 124 48 106 40 88 43.42 95.72
250 10 64 141 69 152 79 174 69 152 60 132 63.64 140.30
300 12 76 167 86 189 110 243 86 189 80 176 72.62 160.01 350 14 104 229 125 274 139 307 115 254 110 242
400 16 119 263 143 159 351 125 277 125 275
450 18 136 299 173 38 182 400 141 311 175 385
500 20 163 359 223 491 225 495 189 418 200 440
600 24 236 519 338 744 320 704 301 664฿ 287 633
700 28 270 595 314 692 273 602 320 704 330 728
750 30 329 725 360 794฿
800 32 346 763 396 873 365 804 428 944 450 992
900 36 432 951 474฿ 1043 495 1089 619 1362 530 1168
1000 40 513 1130 600 1321 583 1282 636 1399 660 1455
42 687 1512
44 763 1680 1140 2513
1200 48 643฿ 1415 885 1948 861 1896 813 1789 1180 2601
1400 54 1592 3510 1600 3528
1500 60 2460 5423
5566
6460
8080
With transmitter MAG 5000 and MAG 6000 compact, weight is increased by approximately 0.8 kg (1.8 Ibs), with MAG 6000 I, weight is increased by 5.5 kg (12.1 lb).
Siemens FI 01 . 2021 3/103