1 TO: City Council
FROM: Ryan Smoot, City Manager
THROUGH: Carla Dillion, Public Works Director
PREPARED BY: Joe Vida, Management Analyst
MEETING DATE: September 5, 2023
SUBJECT: Purchase of CASE Construction Tractor Loader Backhoes for Public Works Department
RECOMMENDATION
Authorize the City Manager to purchase two CASE construction tractor loader backhoes (Model # 580SV) for approximately $264,952.24.
BACKGROUND
The City’s Public Works Department currently owns two backhoes that are scheduled to be replaced in Fiscal Years (FYs) 24-25 and 25-26. One backhoe is used by the Water Systems Operation Division, while the other is used by the Streets/Trees/Parks Divisions.
Backhoes perform many different tasks, such as digging, small demolitions, moving materials, landscaping, breaking asphalt, and paving roads.
Staff is recommending accelerating the scheduled equipment replacement because one of the current backhoes has mechanical issues with its transmission. This is resulting in improper functionality and limited use. The current needed repairs are estimated at $18,000-$20,0000. Additionally, it has been increasingly difficult for staff to find vendors to bid on the repairs because the backhoe is 28 years old and becoming obsolete. Staff is recommending the procurement of two (2) tractor loader backhoes, model number 580SV, manufactured by CASE Construction.
Sourcewell is a government purchasing cooperative that maintains a database of awarded supplier contracts that were competitively solicitated, bid on, and awarded in a manner consistent with the requirements of the City’s purchasing policy. Utilizing Sourcewell provides the City with competitive pricing and saves staff time and the cost of a formal bidding process. The City has utilized Sourcewell in the past for purchases and Item No. 7h
CITY OF LOMITA
CITY COUNCIL REPORT
2 due to the multi-unit discount, staff recommends replacing both pieces of equipment now for the most cost-effective procurement.
The cost for backhoe #1 is $132,453.91, and $132,498.33 for backhoe #2, totaling $264,952.24. The slight variation is due to minor component equipment differences, and shipping/delivery costs from two separate locations. Without the multi-unit and cooperative purchasing discounts the costs would be $179,418.00 and $180,180.00 respectively, totaling $359,598.00. The quotes and specifications are attached as exhibits.
At the June 6, 2023, City Council meeting, the City Council appropriated funds to both the Water Capital Fund (Fund #520) and the Equipment Replacement Fund (Fund # 610).
This action was taken during Discussion and Consideration of Mid-Cycle Budget Amendments, item 8b. These funds are available for this use. Additionally, replacement of the 2013 Freightliner Dump Truck will be deferred from FY 24-25 to FY 25-26 to mitigate the expedited expenditure for the backhoes.
OPTIONS:
1. Approve staff recommendation.
2. Provide further direction.
FISCAL IMPACT
There are sufficient funds budgeted in the Water Capital Fund (Fund #520) and the Equipment Replacement Fund (Fund # 610) for the purchase of two tractor loader backhoes.
ATTACHMENTS
1. Exhibit A – Quote Backhoe #1
2. Exhibit B – Quote Backhoe #2
3. Exhibit C – 580SV Specifications
Reviewed by: Approved by:
______________________
Gary Y. Sugano Ryan Smoot
Assistant City Manager City Manager
Reviewed by: Prepared by:
____________________________
Carla Dillon, P.E. Joe Vida
Public Works Director Management Analyst
Exhibit A
Exhibit A
Exhibit B
Exhibit B
ENGINE
Model FPT F5BFL413B*B
Emissions Certification Tier 4 Final
Type Diesel 4-stroke, Turbocharged
Cylinders 4
Bore/Stroke 3.90 x 4.33 in
(99 x 110 mm)
Displacement 207 in3 (3.4 L)
Fuel injection Direct, high pressure
common rail – HPCR
Fuel Diesel
Engine speeds* RPM
Rated speed – full load 2200
Low idle 900 – 1000
High idle – no load 2330 – 2430
Horsepower @ 2200 RPM:
Gross 97 hp (72 kW)
Net 95 hp (71 kW)
Maximum torque @ 1400 RPM:
Gross 334 lb·ft (453 N·m)
Net 333 lb·ft (452 N·m)
Torque rise at rated speed 45% +/- 5%
Radiator:
Core type Square wave
Core size area 486 in2 (3 145 cm2)
Rows of tubes 4
39° fan:
Style 9 blade suction
Diameter 19.65 in (499 mm)
Ratio** 1.4:1
Pump operating angle ratings:
Side to side Rated 35°
Fore and aft Rated 35°
Oil filtration Replaceable,
full flow cartridge
NOTE: *Engine speeds w/ standard transmission.
Meets federal emission regulations.
**Viscous fan.
DRIVETRAIN
Transmission – standard:
4F-4R Power Shuttle Synchromesh Transmission
manual gear shift, fully synchronized
Specifications below apply to the Power Shuttle
transmission.
Gear ratios Forward/Reverse
1st 5.603/4.643
2nd 3.481/2.884
3rd 1.584/1.313
4th 0.793/0.657
Travel speeds – Standard Power Shuttle
Transmission Forward Reverse
mph (kph) mph (kph)
1st 3.4 (5.5) 4.1 (6.6)
2nd 5.5 (8.9) 6.6 (10.7)
3rd 11.8 (19) 14.2 (22.8)
4th 22.5 (36.2) 27 (43.4)
Transmission – optional:
Powershift H-Type, 4F-3R hydraulic clutch
shifting w/ auto shift mode
Gear ratios Forward/Reverse
1st 5.533/4.549
2nd 3.359/2.762
3rd 1.533/1.260
4th 0.811/—
Travel speeds – Optional H-Type Powershift
Transmission:
Forward Reverse
mph (kph) mph (kph)
1st 3.5 (5.6) 4.2 (6.7)
2nd 5.7 (9.1) 6.8 (10.9)
3rd 12.1 (19.4) 14.5 (23.3)
4th 22.1 (35.5) —
Torque converter ratio 2.38
Differential-lock:
On-the-go push-button activation
Front/Rear axle:
Differential ratio 2.29/2.75
Planetary hub ratio 6.0/6.4
Total reduction ratio 13.7/17.6
Service brakes:
Individually applied, power assisted,
hydraulically actuated, maintenance-free,
self-adjusting, outboard mounted, wet disc,
2 per side.
Total disc area 384 in2 (0.25 m2)
Parking brakes Trans Mounted
spring-applied hydraulic release – SAHR
NOTE: Travel speeds w/ 19.5 L x 24.0 tires.
ELECTRICAL
Voltage 12 Volts, negative ground
Alternator 160 amp
Single Battery 900 amp
Power plugs – 1 20 amp
OPERATOR ENVIRONMENT
ROPS/FOPS certified protective cab; 2 door w/
heat, A/C, defroster, floor mat, Bluetooth radio,
front and rear wiper; Interior rearview convex
mirror; Mechanical suspension deluxe seat; 2 in
(50 mm) retractable seat belt; Cup holder and
storage trays positioned on the right side; and
enclosed storage compartment on left side.
Gauges:
Engine water temperature; Converter oil
temperature; Fuel level; Tachometer/
hourmeter; DEF level.
Warning lights:
Air cleaner restriction; Alternator; A/C high
pressure; Cold start; Engine oil pressure;
Hydraulic oil filter bypass; Parking brake
engagement; Low fuel; Water in fuel; Low DEF.
Audible alarms w/ diagnostics:
Coolant temperature; Engine oil pressure;
Parking brake engagement; Converter oil
temperature; Shuttle engagement/seat
position; Backup alarm; Low DEF.
Horn Dual switched front and rear
OPERATING WEIGHT
Configuration 1:
Cab, HVAC, 14’ standard backhoe, standard
loader bucket with cutting edge, large
counterweight, 24’’ HD backhoe bucket, Front
Wheels 14 x 17.5 Rear Wheels 21L x 24, ride
control and operator.
18,695 lb (8 480 kg)
Configuration 2:
Cab, HVAC, 15’ Extendahoe backhoe, standard
loader bucket with cutting edge, medium
counterweight, 24’’ HD backhoe bucket, Front
Wheels 14 x 17.5, Rear Wheels 21L x 24, ride
control and operator.
19,709 lb (8 940 kg)
580SV
CONSTRUCTION KING TOOL CARRIER BACKHOE LOADER
TIER 4 FINAL CERTIFIED
1 of 6
Exhibit C
Exhibit C
HYDRAULICS
Pump:
Sauer Danfoss Variable Displacement Axial
Piston Pump
Flow Ratings 43.6 gpm @ 2,973 psi
(165 L/min @ 205 bar)
Main relief pressure:
2,973 +/- 44 psi (205 +/- 3 bar)
Filtration:
7-micron, full flow replaceable cartridge on
return line, condition indicator light for filter.
Oil cooler Heavy-duty
Loader control valve:
Two or three spool sectional valve. The two
Spool valve has single lever control for lift and
tilt. The three spool valve has a pilot controlled
clam valve. The lift lever has positive hold “float”
position and “return to dig” feature. Valve is
post compensated with flow sharing. Valve
allows simultaneous operation of loader lift and
loader bucket.
Backhoe flow @ 2200 RPM:
Maximum backhoe flow for 1-way hydraulics:
35.9 gpm @ 2,973 psi
(136 L/min @ 205 bar)
Pilot backhoe control valve:
Six, seven, or eight spool sectional closed
center control valve. Basic control valve is
closed center, w/ circuits in parallel w/ a postcompensated, flow sharing feature for simultaneous operation of all circuits.
1-way flow auxiliary hydraulics:
1-way flow hydraulic valve is equipped with a
variable flow feature adjustable at the valve.
Actuation:
Pilot controls – left-hand joystick/pedal.
2-way flow auxiliary hydraulics:
2-way flow hydraulic valve is equipped with a
variable flow feature adjustable at the valve
Actuation:
Left-hand joystick.
Combo auxiliary hydraulics:
Incorporates both a 1-way flow control valve
and a 2-way control valve, using only 2 hydraulic
lines through the boom.
Actuation:
Activate the 2-way flow switch located on
the rear console
Pilot controls – left-hand joystick
SERVICE CAPACITIES
Fuel tank 34.6 gal (131 L)
DEF tank 3.5 gal (13.2 L)
Hydraulic system:
Total 37 gal (142 L)
Transmission – total system:
4WD Standard 22 qt (20.8 L)
Standard front axle:
4WD Differential 1.7 gal (6.5 L)
Rear axle:
Differential and planetaries 5.6 gal (21.2 L)
Engine oil w/ filter 8.5 qt (8.0 L)
OTHER SPECIFICATIONS
Front tires:
14 L x 17.5, 10-ply rating
12.0 L x 16.5, 10-ply rating
12.5/80 x 18.0 10-ply rating
Rear tires:
19.5 L x 24.0, 10-ply rating
16.9 L x 28.0, 10-ply rating
21 L x 24.0, 10-ply rating
Turning radius: Curb to Curb:
4WD – disengaged*:
Turning Right 14 ft 7 in (4.44 m)
Turning Left 15 ft 5 in (4.70 m)
NOTE: *Turning radius dimensions curb to curb
w/ 12.5/80 x 18.0 front tires and 18.4 x 26.0
R4 rear tires.
2 of 6
LOADER BUCKET SIZES
Type Width Weight Struck Heaped Capacity
Heavy Duty Bucket with bolt-on edge 89 in (2.30 m) 1,042 lb (473 kg) 1.05 yd3 (0.80 m3) 1.30 yd3 (1.00 m3) 4 IN 1® Bucket with bolt-on edge 89 in (2.30 m) 1,721 lb* (781 kg) 1.05 yd3 (0.80 m3) 1.30 yd3 (1.00 m3) NOTE: *Weight of 4 IN 1® bucket includes cylinders and hoses.
BACKHOE BUCKET SIZES
Type Width Weight Heaped Capacity
Heavy Duty 12 in (305 mm) 245 lb (111 kg) 2.8 ft3 (0.08 m3) 18 in (457 mm) 302 lb (137 kg) 4.2 ft3 (0.12 m3)
24 in (610 mm) 348 lb (158 kg) 6.0 ft3 (0.17 m3)
30 in (762 mm) 388 lb (176 kg) 8.1 ft3 (0.23 m3)
36 in (914 mm) 439 lb (199 kg) 9.9 ft3 (0.28 m3)
High Capacity Bucket 24 in (610 mm) 388 lb (176 kg) 7.1 ft3 (0.20 m3) 580SV
LOADER DIMENSIONS
Heavy Duty Bucket 4 IN 1® Bucket
A. Overall operating height – fully raised 13 ft 11 in (4.25 m) 14 ft 5 in (4.38 m) Height to:
B. Bucket hinge pin fully raised 11 ft 1 in (3.38 m) 11 ft 1 in (3.38 m) C. Dump angle at full height 47° 47°
D. Dump clearance at full height, 45° dump:
Bucket 10 ft 7 in (3.22 m) 8 ft 4 in (2.55 m)
E. Dump reach at full height, 45° dump – from bumper:
Bucket 2 ft 9 in (829 mm) 2 ft 8 in (824 mm)
Bucket rollback:
F. @ Groundline 42° 42°
G. @ Full height 50° 50°
H. Digging depth below grade:
Bucket flat 5.0 in (120 mm) 8.6 in (219 mm)
I. Reach from front axle centerline – bucket on ground — 6 ft 10 in (2.07 m) Lift capacity to full height – calculated values 7,606 lb (3 450 kg) 7,044 lb (3 195 kg) Breakout force:
Lift cylinders 8,014 lbf (3 565 daN) 8,041 lbf (3 577 daN) Dump cylinders 14,711 lbf (6 544 daN) 14,950 lbf (6 650 daN) Raising time to full height 3.4 sec 3.4 sec
Bucket dumping time 2.3 sec 2.3 sec
Lowering time:
Power down 2.8 sec 2.8 sec
Clam:
Open time — 1.9 sec
Close time — 1.4 sec
NOTE: Loader dimensions taken with 4WD, 14 x 17.5 front tires and 16.9 L x 28.0 rear tires.
Line drawings are for illustrative purpose only and may not be exact representation of unit.
A
B
D
J
E
H
C
F
I N
L
G
M
K
DIMENSIONS
Center Pivot Backhoe Side Shift Backhoe
with 16.9 L x 28.0 tires with 16.9 L x 28.0 tires
J. Overall transport length:
Heavy Duty bucket 23 ft 7 in (7.19 m) 19 ft 3 in (5.87 m) Overall transport width 8 ft 2 in (2.48 m) 7 ft 10 in (2.39 m) Height:
K. To top of cab 9 ft 5 in (2.86 m) 9 ft 5 in (2.86 m)
L. Transport 13 ft 0 in (3.96 m) 12 ft 10 in (3.90 m)
M. Ground clearance at backhoe frame 13.4 in (341 mm) 11.3 in (286 m) Angle of departure 25° 20°
N. Wheelbase:
16.9 x 28.0 tires 7 ft 2 in (2.18 m) 7 ft 2 in (2.18 m) 580SV 3 of 6
CYLINDERS
Bore Diameter Rod Diameter Stroke Closed Length
Loader:
Lift – 2 3.54 in (90 mm) 1.97 in (50 mm) 28.62 in (727 mm) 40.94 in (1 040 mm) Dump – 2 3.25 in (82.6 mm) 1.75 in (44.5 mm) 30.59 in (777 mm) 40.16 in (1 020 mm) 4 IN 1® clam – 2 3.00 in (76.2 mm) 1.75 in (44.5 mm) 9.08 in (230.6 mm) 19.62 in (498.3 mm) Backhoe:
14 ft Boom 5.12 in (130 mm) 2.56 in (65 mm) 35.71 in (907 mm) 47.52 in (1 207 mm) 14 ft Dipperstick 4.92 in (125 mm) 2.56 in (65 mm) 27.60 in (701 mm) 39.72 in (1 009 mm) Bucket 3.54 in (90 mm) 2.56 in (65 mm) 30.00 in (762 mm) 42.24 in (1 073 mm) 14 ft Extendahoe® 2.95 in (75 mm) 1.77 in (45 mm) 41.34 in (1 050 mm) 55.12 in (1 400 mm) Swing – 2 4.33 in (110 mm) 1.97 in (50 mm) 9.40 in (238.5 mm) 5.40 in (137.1 mm) Stabilizer – 2 3.94 in (100 mm) 2.20 in (56 mm) 24.8 in (630 mm) 37.01 in (940 mm)
AXLE RATINGS
Rear Front – 4WD
Maximum static — 46,367 lbf (20 625 daN)
Dynamic operating 16,861 lbf (7 500 daN) 18,546 lbf (8 250 daN) Static operating 42,152 lbf (18 750 daN) 46,367 lbf (20 625 daN) Oscillation – front axle — 22° total – 11° side to side 580SV 4 of 6
BACKHOE LIFT CAPACITIES
In-Line Cylinder
Standard Backhoe
In-Line Cylinder Backhoe
with Extendahoe®
Retracted Extended
14 ft Backhoe 14 ft Backhoe 15 ft Backhoe 14 ft Backhoe 15 ft Backhoe Boom Lift Lift Capacity
lb (kg)
Lift Capacity
lb (kg)
Lift Capacity
lb (kg)
Lift Capacity
lb (kg)
Lift Capacity
lb (kg)
+16 ft (4.87 m) 3,574 (1 624) 3,055 (1 389) 3,168 (1 440) 1,844 (838) 2,409 (1 095) +14 ft (4.27 m) 4,023 (1 829) 3,516 (1 598) 3,729 (1 695) 2,513 (1 142) 2,607 (1 185) +12 ft (3.66 m) 4,139 (1 881) 3,597 (1 635) 3,828 (1 740) 2,582 (1 174) 2,673 (1 215) +10 ft (3.05 m) 4,069 (1 850) 3,539 (1 609) 3,784 (1 720) 2,594 (1 179) 2,706 (1 230) +8 ft (2.44 m) 3,954 (1 797) 3,424 (1 556) 3,454 (1 570) 2,571 (1 169) 2,673 (1 215) +6 ft (1.83 m) 3,816 (1 734) 3,309 (1 504) 3,245 (1 475) 2,536 (1 153) 2,563 (1 165) +4 ft (1.22 m) 3,689 (1 677) 3,193 (1 451) 3,135 (1 425) 2,490 (1 132) 2,497 (1 135) +2 ft (0.61 m) 3,574 (1 624) 3,078 (1 399) 3,080 (1 400) 2,455 (1 116) 2,464 (1 120) Ground Level 3,470 (1 577) 2,986 (1 357) 3,102 (1 410) 2,409 (1 095) 2,464 (1 120) -2 ft (0.61 m) 3,366 (1 530) 2,894 (1 315) 3,179 (1 445) 2,375 (1 079) 2,508 (1 140) -4 ft (1.22 m) 3,297 (1 499) 2,813 (1 279) 3,113 (1 415) 2,352 (1 069) 2,530 (1 150) -6 ft (1.83 m) 3,239 (1 472) 2,755 (1 252) 3,069 (1 395) 2,329 (1 058) 2,519 (1 145) -8 ft (2.44 m) 3,228 (1 467) 2,732 (1 242) 3,047 (1 385) 2,329 (1 058) 2,530 (1 150) -10 ft (3.05 m) 3,343 (1 520) 2,801 (1 273) 3,113 (1 415) 2,363 (1 074) 2,563 (1 165) -12 ft (3.66 m) 3,574 (1 624) 3,090 (1 404) 3,586 (1 630) 2,467 (1 121) 2,662 (1 210) -14 ft (4.27 m) — — — 2,859 (1 300) 2,915 (1 325)
Dipper Lift
+14 ft (4.27 m) — — — 3,613 (1 642) 3,388 (1 540)
+12 ft (3.66 m) 5,545 (2 520) 4,948 (2 249) 4,312 (1 960) 3,935 (1 789) 3,311 (1 505) +10 ft (3.05 m) 5,330 (2 423) 5,819 (2 645) 4,158 (1 890) 3,875 (1 762) 3,267 (1 485) +8 ft (2.44 m) 5,437 (2 472) 5,819 (2 645) 4,202 (1 910) 3,923 (1 783) 3,300 (1 500) +6 ft (1.83 m) 5,962 (2 710) 5,819 (2 645) 4,488 (2 040) 4,102 (1 864) 3,410 (1 550) +4 ft (1.22 m) — 5,819 (2 645) 5,324 (2 420) 4,495 (2 043) 3,685 (1 675) +2 ft (0.61 m) — — — 5,390 (2 450) 4,191 (1 905)
NOTE: Boom and Dipper Lift Capacities are rated per SAE J31 and are 87% of the maximum hydraulic lift force available with the specified options.
BACKHOE OPERATIONAL DATA
In-Line Cylinder In-Line Cylinder
14 ft Standard Backhoe 15 ft Backhoe with Extendahoe®
Retracted Extended
Digging depth:
Maximum 14 ft 5 in (4.40 m) 15 ft 1 in (4.60 m) 18 ft 6 in (5.63 m) 2 ft (610 mm) flat bottom 14 ft 3 in (4.34 m) 14 ft 11 in (4.55 m) 18 ft 4 in (5.58 m) 8 ft (2.44 m) flat bottom 13 ft 1 in (3.99 m) 13 ft 9 in (4.19 m) 17 ft 5 in (5.30 m) Overall reach from swing pivot 18 ft 7 in (5.66 m) 19 ft 5 in (5.91 m) 23 ft 0 in (7.00 m) Loading height 11 ft 9 in (3.57 m) 12 ft 1 in (3.68 m) 14 ft 2 in (4.32 m) Loading reach 6 ft 9 in (2.05 m) 7 ft 0 in (2.13 m) 9 ft 9 in (2.98 m) Swing arc 180° 180° 180°
Bucket rotation – speed hole 204° 204° 204°
Stabilizer spread – in up position 7 ft 6 in (2.30 m) 7 ft 6 in (2.30 m) 7 ft 6 in (2.30 m) Digging force:
Bucket cylinder – SAE rated 3,050 psi 12,933 lb (5 755 daN) 12,933 lb (5 755 daN) 12,933 lb (5 755 daN) Dipper cylinder – SAE rated 3,050 psi 8,588 lb (3 822 daN) 8,100 lb (3 605 daN) 5,782 lb (2 573 daN) NOTE: Lift capacities apply straight to the rear of prime mover. 4WD with 14 x 17.5 front tires, 16.9 x 28 rear tires, and equipped with 24 in (610 mm) heavy-duty bucket except as noted. 580SV 5 of 6
STANDARD EQUIPMENT
OPERATOR ENVIRONMENT
See page 1
ENGINE
FPT F5 diesel
Selective Catalytic Reduction – SCR
Full flow engine oil filter
Aspirated air cleaner – replaceable dual
element dry type with radial seal
Fuel filter with water trap
Radiator with de-aeration bottle
Antifreeze to -34° F (-37° C)
Electronic throttles – foot and rotary hand
Self-adjusting belt
High Pressure Common Rail computer
controlled injection with diagnostic features
ECO Power Mode
Auto Engine Idle
Auto Engine Shutdown
Auto Protection Shutdown
Electronic Fuel Priming
Glow Plugs
DRIVETRAIN
Power Shuttle 4F-4R synchromesh
transmission
Front axle:
4WD mechanically driven front axle with
14.0 L x 17.5 tires
Rear axle:
4WD heavy-duty outboard planetary
drive, with 16.9 L x 28.0 tires
Torque converter – 11.8 in (300 mm)
On-the-go electric 4WD control
Electric F/R shuttle control
Electric differential lock control, push-button
Park brake, spring-applied, hydraulic
release – SAHR
HYDRAULICS
Load Sensing Closed Center with Variable
Volume Pump
Heavy-duty hydraulic oil cooler
7-micron, spin on oil filter
LOADER
Tool carrier loader arms with self leveling in
both directions and return to dig; Single
lever 4-function loader control: lift, dump,
clutch cut-out, differential lock
BACKHOE
In-line cylinder curved boom backhoe design
Cleated dirt stabilizer pads (center pivot)
Mechanical Transport Lock
OTHER
Forward tilt engine hood
Front/Rear tie downs
Reflective logos
Signal Lights – cab and canopy:
2 rear tail/stop
2 front flashers/turn
2 rear flashers/turn
Working/Driving Lights – cab and canopy:
Adjustable halogen work lights – 55 W:
4 front
4 rear
Master disconnect switch and remote
jump-start terminals
Hydrostatic steering
Backup alarm
Vertical spin-on engine oil, fuel and
hydraulic filters
Tool Box
WARRANTY
1-Year/Unlimited-Hour Full-Coverage Base
Limited Warranty
2-Year/2,000-Hour Extended Engine Warranty
OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT
Speed selectable Auto Ride Control
ROPS/FOPS certified protective canopy
DRIVETRAIN
H-Type Powershift transmission, 4F-3R,
hydraulic clutch shifting, kick down,
transmission disconnect and FNR switch in
loader control lever, includes auto shift mode
LOADER
Auxiliary hydraulics for loader-mounted
equipment with thumb-operated
proportional control
Hydraulic front quick coupler
Tool portfolio of additional attachments
Buckets – see page 2
BACKHOE
Backhoe design styles:
Side Shift
Center Pivot
Overlapping Cylinder Boom with Extendahoe®
1-way Auxiliary backhoe hydraulics for
hammers, plate compactors or similar
1-way flow attachments
1-way/2-way Auxiliary backhoe hydraulics
for hammers, plate compactors or similar
1-way flow attachments or switch to 2-way
flow for augers or similar 2-way flow
attachments
Backhoe Booms:
14 ft Standard Boom
14 ft Extendahoe®
15 ft Extendahoe®
Pilot operated control system:
Thumb-operated proportional
Electro-Hydraulic Extendahoe® control
Thumb-operated horn button
Thumb-operated auxiliary hydraulic control
Infinitely adjustable towers
In-cab switchable “excavator to backhoe”
control pattern change
Dirt stabilizer pads (side shift)
Universal Footstreet stabilizer pads (side shift)
Flip over stabilizer pads (center pivot)
Bucket quick coupler
Buckets – see page 2
OTHER
LED Working/Driving Light Package:
4 front
4 rear
Dual 12 volt batteries
Cold Weather Lubricants
TELEMATICS
CASE SiteWatch™ Telematics
SERVICE PARTS
3 inch seat belt
N Series compatible backhoe coupler for
in-line cylinder backhoe
©2023 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% post-consumer fiber.
IMPORTANT: CASE Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your CASE dealer/distributor will be able to give you details of the products and their specifications available in your area.
CASE Construction Equipment is biodieselfriendly. NOTE: All engines meet current EPA emissions regulations. All specifications are
stated in accordance with SAE Standards or
Recommended Practices, where applicable.
Always read the Operator’s Manual before
operating any equipment. Inspect equipment
before using it, and be sure it is operating
properly. Follow the product safety signs and
use any safety features provided.
CaseCE.com
Form No. CCE202306580SV
Replaces Form No. CCE202303580SV
580SV 6 of 6