ORIGINAL
City of Merced
MERCED
Request for Bids
Compact Track Loader
(Life Cycle Cost Analysis)
Vehicles
Overview, Qualifications, Definitions
1. Overview of Requirements
A. City is seeking Bids for one Compact Track Loader as per Exhibit A - Specifications as listed in the Bid Line Items.
lI. Bidder Qualifications
A. Bidders must be an authorized dealer for the specified equipment capable of selling, delivering, and servicing (optional) the items as specified in Exhibit A.
B. Bidders must submit the completed Bid Form as their bid response. Any deviations from the list of specifications shall be noted on a separate page in detail and submitted as an attachment to the Bid Form.
C. Bidders must state in their bid response the delivery time in calendar days. Bids submitted without a clear statement of delivery time may be rejected III. Definitions, Acronyms, and Abbreviations
A. Bid Documents = City documents, forms, exhibits, etc. attached to Bid.
B. Bidder = the prospective or actual bidder, but not awarded.
C. City = City of Merced
D. Contractor = the awarded bidder.
E. CR = City Representative.
F. Bid = paper bid submitted by bidders.
G. RFB = Request for Bids: City-provided electronic documents/postings. (CONTINUED ON NEXT PAGE)
City of Merced Compact Track Loader
Vehicles
Exhibit A: Specifications
1. Specifications
A. General
Submit one original and one copy, signed and dated, Bid Form on paper as your bid response.
SUBSTITUTIONS and ALTERNATES are NOT acceptable unless City has stated otherwise in the Specifications.
Do NOT include additional optional equipment or packages unless it is required by the manufacturer's standards to conform to our specifications.
Various makes and various models may be bid as long as they conform to the specifications requirements. Makes and models, when cited below, are guidelines regarding the classifications and type of vehicles required by City; they are not shown in any order of preference.
Life Cycle Cost Analysis. City may (at its discretion) conduct a Life Cycle Costs Analysis (LCCA) for each bid, which will include the vehicle costs, delivery costs, extended warranty cost (if so required); projected resale value*; maintenance** *, repair**, and fuel** costs based on the most recent like model and year available at the time bids are received.
Bidders will need to factor the LCCA elements into their bid prices. See Sample Form below for typical LCCA factors.
* www.BlackBookPricePoint.com; ** www.Edmunds.com.
B. Sample Form: Projected Life Cycle Cost Analysis (LCCA) Bidder Name, Vehicle Make & Model Bidder 1 Bidder 2 Bidder 3 Dealer: Holt of
California
City: Los Banos
Make: Caterpillar
Model: 255 HF
Trim: T5
Year: 2024
Bid Price Bidder 1 Bidder 2 Bidder 3
1 BASE UNIT (per specifications INCLUDING required options) $ 80,643.41 $ 2 Desired OPTIONS (IF listed as a Bid line item) NA $ 9,500.00 Total Price (Base Unit + Desired Options) $ 90,143.41
4 EXTENDED WARRANTY (IF listed as a bid item) NA $ 0.00 $ 5 SALES TAX 8.25% tax amt $ 7,436.83 $
6 DELIVERY COSTS (per Vehicle to FOB Merced CA) $ 0.00
7 TIRE FEES $1.75 X Number of tires per Vehicle #/unit $ 0.00 $ 8 Total Bid Price per Vehicle (Add lines 1-8) $ 97,580.24 $ $ Total Bid Price X QTY $ 97,580.24 $
Life Cycle Cost Factors Bidder 1 Bidder 2 Bidder 3
9 PROJECTED RESALE VALUE * (shown as negative) ($ ) ($ ($ 10 DEPRECIATION (line 3- line 9) $
11 MAINTENANCE ** $
12 REPAIR ** $
13 FUEL ** $ $ $
14 Total LCC (lines 10-13) $ $ $
15 Total Ext Warranty, Tax, Delivery, Tire Fees (lines 4-7) $ $ $ City of Merced Compact Track Loader 2
Vehicles
Grand Total LCC (subtotal LCC x QTY) #ofunits $ $
* Projected Resale Value based on www.BlackBookPricePoint.com 72-month residual. ** Maintenance, Repair, and Fuel Costs based on www.Edmunds.com Specifications
Bid specifications for Compact Track Loader
Engine horsepower minimum requirement of 74 HP.
2. Unit to be furnished with enclosed cab with climate control AC, heater, and radio.
3. Unit to be equipped with joystick controls for maneuvering and bucket operation.
4. Unit to be equipped with auxiliary hydraulic connections for accessories and appropriate hydraulic capacity to operate attachments.
5. Unit to be equipped with hydraulic quick connectors for in cab attachment of buckets and
6. Unit to have a minimum operating weight of 9100 pounds.
7. Unit to come with standard duty bucket with a minimum bucket width of 68 inches.
8. Unit to come equipped with 15-inch tracks with standard duty tread suitable for all terrain
9. Unit to come equipped with additional 74 hopper sweeper with poly bristles without gutter attachments or dust control. Angle brooms or units without collection hoppers are non-qualified
City of Merced Compact Track Loader 3
Vehicles
CITY OF MERCED
PURCHASING DEPARTMENT
[email protected]
MAIL SEALED BIDS TO: PARCEL POST OR HAND
678 W 18'h St Merced CA BID FORM DELIVER BIDS TO:
95340 2525 "O" ST MERCED CA
95340
QUOTE HEREON YOUR LOWEST PRICE F.O.B. MERCED (INCLUDING BUT NOT LIMITED TO DISCOUNTS, REBATES,
REGISTRATION AND OTHER FEES IN UNIT PRICE) FOR THE FOLLOWING EQUIPMENT, MATERIALS, SUPPLIES OR SERVICES. NO ALLOWANCE FOR FREIGHT, CARTAGE, PACKING, OR POSTAGE UNLESS SPECIFIED ON THIS BID. WHERE BRAND OR MAKE IS SPECIFIED, SIMILAR OR EQUAL WILL BE CONSIDERED.
SEALED BIDS DUE: DEPT: Land Application
Tuesday, August 6th, 2024 at 2:00 P.M. REQUISITION NO: 08062024
QTY UOM DESCRIPTION PRICING
1 Each Compact track loader (Specs 1-8) UNIT PRICE $80,643.41 1 Each Hopper sweeper (Spec 9) UNIT PRICE $9,500.00
DELIVERY 0.00
COST
SALES TAX $7,436.83
(8.25%)
Notice: Submit one original bid and one copy CA TIRE FEE 0.00 EXTENDED 0.00
WARRANTY
TOTAL $97,580.24
AMOUNT
* BID OPENING WILL BE HELD IN THE PURCHASING OFFICE CONFERENCE ROOM AT 2525 "O" STREET, MERCED, CA* We have stated hereon the prices at which we will furnish and deliver the equipment, COMPANY: Holt of California materials, supplies or services as specified above. BY: Louie Soares TITLE: Territory Manager
Delivery will be made in _14_days after receipt of order (A.R.O.), except as SIGNATURE:
otherwise ferie bor
indicated. DATE: 8-2-24
PHONE: 209-401-4445
Note: The City reserves the right to reject any and or all bids, split the bid award, or EMAIL: [email protected] to
accept the bid that best serves the public purpose, even though it may not be the PAYMENT TERMS: (Net 10, 30, 45) Net 30 Days lowest.
NOTICE:
ALL BIDS MUST BE SIGNED
City of Merced Compact Track Loader 4
Vehicles
Exhibit B: Pricing
I. Quantities
A. The quantities are firm fixed quantities for this bid.
B. City may purchase additional units at the same bid prices for up to one year at same price based on model availability and the exact same configuration as in Exhibit A- Specifications
II. Pricing
A. Pricing Terms
Unit Price: includes everything, including but not limited to transportation, delivery, offloading; registering units with DMV; providing exempt status license plates; includes all preparation, documentation, and transfer charges; includes environmental and disposal fees; no other costs will be considered
2. Discounts: all applicable discounts must be factored into the unit price.
3. Fixed Unit Prices: prices are fixed through the delivery period for all units.
Government-Mandated Taxes and Fees: must be included in unit prices.
5. CA Tire fee: is the per tire fee that the State of California assess, which is subject to change. This amount is included in the Bid as a fixed cost.
6. Sales Tax: City will add the appropriate sales tax to each order.
Disallowed Costs
Business Permits, Licenses and Fees: obtain, at Contractor's sole expense, all permits and licenses required in connection with providing the required units and in Contractor's name.
Additional charges: not allowed, no fuel surcharges, no mileage rates.
Bid Results Price Sheet
The award bidder's Bid Form sheet, as accepted by the City, will be incorporated as part of Exhibit B.
END OF EXHIBIT B
City of Merced Compact Track Loader 5
Vehicles
Bid Terms and Conditions
Specifications are intended to describe the specific type, size and quality of equipment which will best meet the demands of the City. They are not intended to favor any one brand or make.
The mention herein of any particular name of equipment or material merely serves to specify the quality or general type required
Machines or equipment must comply with current state and federal regulations.
All materials and auxiliary equipment shall conform to the size, quality, and quantity shown in the specifications. They shall be from new stock, delivered in good condition. No damaged items will be accepted.
City reserves the right to reject any or all bids and to waive informalities and minor irregularities.
The City reserves the right to determine which is the best bid considering price, quality, warranty, and delivery within specified time limit, as well as any other criteria set forth in the bid.
Delivery time being of essence in the award of this purchase, all bids must specify delivery date on which the items) will be delivered. Supplier shall supply the goods and or perform the services, with the schedule and term, as specified herein. Time is of the essence. All items shall be delivered "free on board (F.O.B.) destination" to the location specified herein, full freight pre-paid except for special or expedited orders, which shall be agreed upon prior to shipment.
Successful bidder shall furnish the City's purchasing supervisor with all technical information on items listed in the specifications of the bid
Price bid shall be the maximum prices paid by the City of Merced. Price quoted shall include taxes. The City is exempt from all Federal Excise Taxes.
Price shall include license, registration, tire, and any other relevant fees. Bidder agrees to register all vehicles with the California Department of Motor Vehicles (DMV) prior to delivery.
All invoices and correspondence shall show the number of the contract or purchase order issued to the bidder awarded.
If Bidder submits a bid for alternate items, Bidder shall fill out additional bid sheets, fully explaining the differences and any perceived advantages of said items.
Bidder's security in the form of a bid bond, certified or cashier's check issued by a responsible bank or banker of the State of California in the amount of 10% of the total net amount of the bid, and payable to the City of Merced must be attached to the bid proposal, only when required.
Bidders shall be entitled to return of bid security; however, a successful bidder shall forfeit his bid security upon refusal or failure to execute the contract within ten (10) calendar days after the notice of award of contract, unless the City is responsible for the delay. City Council, on refusal or failure of the successful bidder to execute the contract, may award it to the next lowest responsible bidder, the amount of the lowest bidder's security shall be applied to the contract price differential between the lowest bid and the second lowest bid. Surplus, if any, shall be returned to the lowest bidder.
Conflict of Interest: Bidder certifies that no City officer, employee or authorized representative has any financial interest in the business of the bidder and that no person associated with the bidder has any interest, direct or indirect, which could conflict with this bid. The bidder is familiar with the provisions of California Government Code section 87100, et seq., and certifies that it does not know of any facts which would violate these laws. Bidder will promptly advise City if a conflict arises.
City of Merced Compact Track Loader 6
Cat®
255
CAT
Сомраст TRACK LOADER
FEATURES:
The Cat® 255 Compact Track Loader, with its vertical lift design, delivers • Electronically controlled Cat C2.8T engine meets U.S. EPA Tier 4 Final extended reach and lift height for quick and easy truck loading. Its standard and EU Stage V emission standards while delivering maximum horsepower torsion suspension undercarriage system provides superior traction, flotation, across a wide RPM range and providing high torque for increased stability, and speed to work in a wide range of applications and underfoot working performance, no matter the application. conditions. The 255 features the following: • Standard torsion suspension undercarriage and standard two-speed travel, combined with the optional Speed Sensitive Ride Control system • Redesigned Operator Station delivers a larger operating environment, and combined with additional seat travel, the 255 provides more space improves operation on rough terrain, enabling better load retention, for operators of any size. The optional one-piece, sealed, and pressurized increased productivity, and greater operator comfort. cab offers a clean and quiet workspace with excellent air distribution • Maximize machine capability and control with the Advanced Joysticks through optimally placed vents throughout the cab. and Advanced Touchscreen Monitor. The 20.3 cm (8-inch) Advanced Touchscreen Monitor offers cutting-edge functionality and control that • Available ventilated and heated high-back air ride seat with seat- includes an integrated radio, Bluetooth connectivity, and multi-camera mounted adjustable joystick controls deliver industry-leading operator comfort. (side-view) option, and supports 32 different language choices. The Advanced Joysticks provide unmatched control of machine functions • High-performance power train provides selectable settings for drive and adjustments within the display without the operator having to remove power priority and maximum travel speed (overdrive) to customize his hands from the controls. This includes on-joystick navigation of the the machine performance to match the task. Advanced Touchscreen Monitor, radio volume up/down/mute, creep • Three levels of auxiliary hydraulic performance available Standard activation, creep on/off, creep speed increment/decrement, one-button Flow, High Flow, and High Flow XPS. Standard flow for attachments Smart Attachment control activation, and additional auxiliary control that require a base level of auxiliary flow and horsepower, High Flow buttons that deliver single-button control of complex attachment functions. boosts the auxiliary flow for applications that demand additional hydraulic • Ground-level access to all daily service and routine maintenance flow for increased attachment performance, and the High Flow XPS points help reduce machine downtime for greater productivity. hydraulic system provides maximum auxiliary hydraulic performance by delivering additional flow and additional pressure for the most • Broad range of performance-matched Cat Attachments make the Cat demanding attachments and applications. Compact Track Loaders the most versatile machine on the job site.
Specifications
Engine Weights* (continued)
Engine Model Cat® C2.8T (turbo) CO Tip Loaight Ads to Operating Weight +125 kg +276 lb Gross Power SAE J1995 55AKW 74.3 hp +172 kg +379 lb
Net Power SAE 1349 54.kW 73.5 hp ROC (35%) +60 kg +132 lb Net Power ISO 9249 544KW 73 hp
Peak Torque at 1,600 pm SAE J1995 300 N-m 221 Ibf-it +54 kg +119lb Displacement 2.8 L 171 in? Tip Load +36 kg +79 lb
Stroke 90 mm 3.5 in ROC (35%) +13 kg +28 lb
Bore 110 mm 4.3 in
Weights*
4345 kg 9,578 1b
3238 kg 7,140 lb
Rated Operating Capacity (ROC) (35%) 1133 kg 2,499 lb
ROC (50%) 1619 kg 3,570 lb
Enclosed Cab Adds to Operating Weight +82 kg +180 lb
Tip Load +49 kg +108 lb
ROC (35%) +17 kg +38 lb
CAT®
255 Compact Track Loader
20 - 9
Dimensions*
1 Length of Track on Ground 1485mm 58.5 in 12 Departure Angle 30.6° 2 Overall Length of Track 1948 mm 76.7 in 13 Maximum Dump Angle 46.3° 3 Length without Bucket 2800 mm 110.2 in 14 Vehicle Width (320 mm/12.6 in tracks) 1675 mm 65.9 in 4 Length with Bucket on Ground 3430mm 135 in Vehicle Width (400 mm/15.7 in tracks) 1760 mm 69.3 in 5 Height to Top of Cab 2115mm 83.3 in 15 Turning Radius from Center - Machine Rear 1656 mm 65.2 in 6 Maximum Overall Height 3941mm 155.2 in 16 Turning Radius from Center - Coupler 1377 mm 54.2 in 7 Bucket Pin Height at Maximum Lift 3150mm 124.0 in 17 Turning Radius from Center - Bucket (racked) 2105 mm 82.9 in 8 Bucket Pin Height at Carry Position 195 mm 7.7 in 18 Maximum Reach with Arms Parallel to Ground 1162 mm 45.7 in 9 Reach at Maximum Lift and Dump 540 mm 21.3 in 19 Rack Back Angle at Maximum Height 85.2° 10 Clearance at Maximum Lift and Dump 2424mm 95.4 in 20 Bucket Pin Reach at Maximum Lift 151mm 5.9 in 11 Ground Clearance 212mm 8.3 in 21 Bucket rollback angle (ground level) 27° Power Train Operating Specifications*
Travel Speed (Forward or Reverse) Rated Operating Capacity:
One Speed 9.2 km/h 5.7 mph 35% Tipping Load 1133 kg 2,499 1b Two Speed 14.7 km/h 9.1 mph 50% Tipping Load 1619 kg 3,570 lb Rated Operating Capacity
Hydraulic System
with Optional Counterweight (at 35%) 1194 kg 2,631 Ib
Hydraulic Flow - Standard: Tipping Load 3238 kg 7,140 1b Loader Hydraulic Pressure 24 130 kPa 3,500 psi Breakout Force, Tilt Cylinder 3060 kg 6,746 lb Loader Hydraulic Flow 86 L/min 23 gal/min 2674 kg 5,895 lb Breakout Force, Lift Cylinder
Hydraulic Power (calculated) 346kw 46.4 hp Ground Contact Area (320 mm/12.6 in track) 1.02 m? 1,582 in? Hydraulic Flow - High Flow: Ground Contact Area (400 mm/15.7 in track) 1.28 m? 1,977 in? Loader Hydraulic Pressure 24 130 kPa 3,500 psi 41.8 kPa 6.1 psi Ground Pressure (320 mm/12.6 in track)
Loader Hydraulic Flow 113 L/min 30 gal/min Ground Pressure (400 mm/15.7 in track) 34.0 kPa 4.9 psi Hydraulic Power (calculated) 454 KW 60.9 hp
Hydraulic Flow - High Flow XPS:
Loader Hydraulic Pressure Cab
28 000 kPa 4,061 psi Rollover Protective Structure (ROPS) ISO 3471:2008 Loader Hydraulic Flow 113 L/min 30 gal/min
Hydraulic Power (calculated) 52.7 KW 70.7 hp Falling Object Protective Structure (FOPS) ISO 3449:2005 Level Service Refill Capacities
Cooling System 11.5 L 3.0 gal
Engine Crankcase 8.2 L 2.2 gal
Fuel Tank 95L 25.1 gal
Hydraulic System 36.8 L 9.7 gal
Hydraulic Tank 26 L 6.9 gal
2 255 Environmental Declaration
The following information applies to the machine at the time of final manufacture as configured for sale in the regions covered in this document. The content of this declaration is valid as of the date issued; however, content related to machine features and specifications are subject to change without notice. For additional information, please see the machine's Operation and Maintenance Manual.
For more information on sustainability in action and our progress, please visit https://www.caterpillar.com/en/company/sustainability.
Engine Oils and Fluids
• The Cat" C2.8T (turbo) engine meet U.S. EPA Tier 4 Final and • Caterpillar factory fills with ethylene glycol coolants. Cat Diesel EU Stage V emission standards. Engine Antifreeze/Coolant (DEAC) and Cat Extended Life • Cat diesel engines are required to use ULSD (ultra-low sulfur Coolant (ELC) can be recycled. Consult your Cat dealer for diesel fuel with 15 ppm of sulfur or less) or ULSD blended with more information. the following lower-carbon intensity fuels up to: • Cat Bio HYDO™ Advanced is an EU Ecolabel approved / 20% biodiesel FAME (fatty acid methyl ester)
/ 100% renewable diesel, HVO (hydrotreated vegetable oil) • Additional fluids are likely to be present, please consult the and GTL (gas-to-liquid) fuels Operations and Maintenance Manual or the Application and Refer to guidelines for successful application. Please consult your Installation guide for complete fluid recommendations and Cat dealer or "Caterpillar Machine Fluids Recommendations" maintenance intervals. (SEBU6250) for details.
Features and Technology
Air Conditioning System
• The following features and technology may contribute to fuel • The air conditioning system on this machine contains the fluorinated savings and/or carbon reduction. Features may vary. Consult greenhouse gas refrigerant R 134a (Global Warming Potential = 1430).
The system contains 0.85 kg of refrigerant which has a CO: Extended life coolant and long life hydraulic fluid extend equivalent of 1.216 metric tonnes. maintenance intervals to reduce fluid consumption Boost productivity with Cat technologies like work tool Paint positioner, return to dig and Cat Smart Attachments Save fuel with efliciency features such as foot throttle pedal • Based on best available knowledge, the maximum allowable and cooling system demand fan concentration, measured in parts per million (PPM), of the Remote machine monitoring through onboard Product Link following heavy metals in paint are:
- Barium < 0.01%
Cadmium < 0.01%
Chromium < 0.01%
Lead < 0.01%
Sound Performance
Inside Cab* - 80 dB(A)
Outside Cab** - 103 dB(A)
• Cab and ROPS are standard in North America and Europe. *The declared dynamic operator sound pressure levels per ISO 6395:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum
engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
3 255 Compact Track Loader
ATTACHMENTS
Get more from your machine with Cat attachments. Choose from a wide variety of options and tailor your machine to different tasks and conditions.
Augers
Backhoes
Bale Grabs
Bale Spears
Blades, Grader, Box, Angle and Dozer
Brooms, Angle, Pickup and Utility
Brushcutters
Buckets
Cold Planers
Compactors
Fork Tines and Carriages
Hammers
Material Handling Arm
Mulchers
Nursery Forks
Rakes, Grapple, Landscape
and Power Box
Shears
Snow Blowers
Snow Plows
Snow Pushes
Snow Wings
Stump Grinders
Tillers
Trenchers
Wheel Saws
Smart Backhoe
Smart Dozer Blade with Assist
Smart Grader Blade with Assist
255 Compact Track Loader
MANDATORY EQUIPMENT
• Quick Coupler: Manual or Hydraulic PRODUCT LINK™
• High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), • Product Link™ Basic series PL243 or 3-point lap/shoulder • Product Link Elite series PLE643 • Steel Imbed Rubber Track - 320 mm (12.6 in) bar tread. 400 mm (15.7 in) block tread, 400 mm (15.7 in) bar tread COOLING FAN • Dual Flange Front Idler/Single Flange Rear Idler or Triple Flange • On-demand, variable speed hydraulic cooling fan Front/Rear Idlers • On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
PERFORMANCE PACKAGES
• Performance Package HP1: Standard Flow Hydraulics GUARDING AND SEALING PACKAGES • Performance Package HP3: High Flow XPS Hydraulics • HDO - base guarding and sealing (engine air inlet rain cap, front cab- to-frame sealing, and hydraulic fill access door)
COMFORT PACKAGES • HD1- intermediate guarding and sealingt (HDO + cab-to-frame side • Open canopy: Cup Holder, Cell Phone Pocket, choice of viny/ Seat sealing, lockable fuel fill access door, tilt cylinder guarding, and drive (Mechanical Suspension, High Back/Heated/Air Ride Seat) line bottom guarding.) • Enclosed Cab with heat and air conditioning: Side Windows, • HD2 - most comprehensive guarding and sealingt (HD1 + turbo guard, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical exhaust stack wrap, DPF wrap, quick disconnect guarding, fully Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated closed drive line guarding, under step hydraulic lines guard cove and Heated Air Ride Seat and Door choice (Glass or Polycarbonate) engine air inlet pre-cleaner TECHNOLOGY PACKAGES †Some equipment varies by region.
• T2 - Standard Display, Standard Joysticks, traditional Key Start switch, and Rear-view camera.
• T4 - Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
• T5 - T4 + 2 additional side view cameras.
RADIO
• Radio, none - for open canopy machines and countries not certified for Bluetooth® technology
• Integrated AM/M radio with Bluetooth technology.
Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone.
Only for use with enclosed cab. Availability varies by country. • Integrated DAB+/AM/FM radio with Bluetooth technology.
Includes USB port, 3.5 mm (0.13 in) AUX input, and BT microphone.
Only for use with enclosed cab. Availability varies by country. 5 255 Compact Track Loader
STANDARD EQUIPMENT
ELECTRICAL HYDRAULICS
• Work Tool Electrical Harness • Selectable control pattern - ISO or H • Heavy duty battery • Electro/hydraulic implement control • Battery disconnect with lockout feature • Electro/hydraulic hydrostatic transmission control • 12-volt Electrical System • Speed sensor guarding
• 85 Ampere Alternator • Heavy duty flat faced quick disconnects with integrated pressure • LED Work Lights release lever
• Auto Reverse Lights • Hydraulic oil level sight gauge • Switch Backlighting
POWER TRAIN
• Interior LED Dome Light
• Cat C2.8T turbocharged diesel engine, meeting Tier 4 Final and Stage V • Backup Alarm Emission Standards:
• Electrical Outlet, Beacon
• Glow plugs starting aid
• Exterior Courtesy Lighting • Liquid cooled, direct injection • Automatic Work light notification flash when parking brake is released • Extended life antifreeze (-37° C, -34° F) OPERATOR ENVIRONMENT • Air cleaner, dual element, radial seal • Full color LCD monitor: Creep speed control, Drive response • Scheduled Oil Sampling (S-O-Ss) Valve, Hydraulic Oil adjustment, Implement response adjustment, Drive Power Priority • Ecology drain - coolant adjustment, Language selection (× 32), Multi-operator Anti-theft • Radiator coolant level sight gauge Security System and Monitoring, Maintenance schedule and • Radiator expansion bottle reminders, Event and Diagnostic Code monitoring, Date /Time/ • Filter, hydraulic supply, cartridge type Units/Brightness settings, and Smart Technology for use with Smart Attachments. • Filter, hydraulic return, cartridge type • Operator Warning System Indicators: Air Filter Restriction, Alternator • Filter, canister type, engine oil Output, Armrest Raised/Operator Out of Seat, Engine Coolant • Filter, canister type, fuel and water separator Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic • Radiator/hydraulic oil Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake • Cooler (side-by-side) Engaged, Engine Emission System (where applicable) • Spring applied, hydraulically released, parking brakes • Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, • Hydrostatic transmission Battery Voltage, Tachometer
• Lockable fuel cap
• Fold In Ergonomic Contoured Armrest
• Hydraulic demand cooling fan
• Control Interlock System, when operator leaves seat or armrest raised:
Hydraulic System Disables, Hydrostatic Transmission Disables, Parking • Auto engine idle Brake Engages
UNDERCARRIAGE
• ROPS Cab, Tilt Up
• Torsion Suspension (4 independent torsion axles)
• FOPS, Level l
• Two speed travel
• Top and Rear Windows
• Integrated tie downs on track frame (4)
• Floor Mat
• Headliner FRAME
• Interior Rearview Mirror • Machine tie down points (9) • Horn • Removable panels for machine frame cleanout
• Hand (Dial) Throttle, Electronic • Support, lift arm
• Seat Mounted Joystick Controls • Steel rear and front bumpers, welded • Cell Phone Storage Pocket • Fuel fill, machine right hand side • Cup Holder
• 12-volt power port OTHER
• Foot Throttle • Auxiliary Hydraulics, Continuous Flow • Telematics, Product Link, Cellular
• Steel engine door with replaceable louvers
• Engine door - lockable
• Work tool attachment coupler
• Cat ToughGuard™ hose
6 255 Compact Track Loader
OPTIONAL EQUIPMENT
• External Counterweights • Speed Sensitive Ride Control • Beacon, LED • Bluetooth Key Security
• Engine Block Heater - 120V 1 Attachment Hose Guide
• Oil, Hydraulic, Cold Operation • Corrosion Inhibitor Coatin • 4-point machine lifting eyes
• Paint, Custom
PICKUP BROOMS
Cat® Pickup Brooms sweep and deposit material into an integrated hopper bucket for easy removal and dumping.
Bi-directional capabilities of the bristles allow pickup brooms to sweep in forward or reverse machine travel. Optimum sweeping style is in forward travel, resulting in over-the-brush pickup. Certain conditions require a dust pan style of sweeping, done in reverse travel. BP115C and BP118C models are for use on skid steer loaders, compact tracker loaders and compact wheel loaders. The BP22 and BP25 are for used backhoe loaders, compact wheel loader and small wheel loaders.
FEATURES - BP115C, BP118C PICKUP BROOMS
LARGE HOPPER CAPACITY ADJUSTABLE VOLUMIZER INTERIOR DEFLECTORS Large hopper capacity allows greater Adjustable volumizer allows more material Interior deflectors, rear bucket seal, and productivity with longer sweeping cycles. retention in hopper, giving operator more side brush stripping direct dirt and dust into Wide bucket opening permits fast, sweeps before stopping to empty material. the bucket, reducing spillage and air-borne efficient dumping. contaminants.
BRISTLE HEIGHT ADJUSTMENT MOTOR SERVICABILITY DUAL CHAIN AND LOADER ARM Bristle height adjustments have been Motor serviceability is enhanced with BRACKET SYSTEM simplified with the use of handle and a handle shaped motor bracket, core Dual chain and loader arm bracket system a tool-less locking feature. connection is close to broom wall and single holds broom housing horizontally when retention pins allow for quick brush change emptying the hopper. and less downtime.
REPLACEABLE BOLT-ON GUIDE WHEEL SERRATED STEPS
CUTTING EDGES Heavy-duty low profile pneumatic guide wheel Serrated steps help the operater safely enter
Replaceable bolt-on cutting edges increase supports the hood during sweeping. and exit the cab. wear life of hopper bucket.
6 BROOMS
FEATURES - BP115C, BP118C PICKUP BROOMS (continued)
OPTIONAL DUST CONTROL OPTIONAL GUTTER BRUSH TOOL MOUNTED OMM An optional water sprinkler kit is available Optional gutter brush mounted on the left or Tool mounted and sealed from the elements, which helps reduce the amount of airborne right side of the broom assists in removing this holder includes all of the operation dust during sweeping operations. material from gutters and pavement edges. maintenance manuals (OMM) and guides required for proper operation of the work tool.
DIMENSIONS - BP115C, BP118C PICKUP BROOMS
D
PICKUP BROOMS
MODEL BP115C BP118C
A Overall Width - mm (in) 1990(78.3) 2295(90.4)
B Sweeping Width - mm (in) 1524(60) 1829(72)
872(34.3)
C Overall Height -mm (in)
D Overall Length - mm (in) 1837 (72.3)
0.41 (0.54) 0.49 (0.60)
Hopper Capacity - m? (yd?)
526 1160) 570 (1257)
Weight -kg (lb)
Brush Diameter - mm (in) 660(26)
Brush Speed at Maximum Flow - pm 199
Optimal Hydraulic Flow - L/min (gpm) 42-86 (11-23)
Optimal Hydraulic Pressure - bar (psi) 145-235 2100-3400) Required Hydraulics Standard Flow
Compatibility CWL - 903D-908 CWL -903D-908
SSUCTL - 226B3-299D3 SSL/CTL - 226B3-299D3
CWL = compact wheel loader
SSL/CTL = skid steer loader/compact track loader
BROOMS 7