General Tax
A tax imposed for general governmental purposes, the
proceeds of which are deposited into the general fund.
A majority vote of the electorate is required to impose, extend or increase any general tax. See also “special tax.” Redlands Regular Meeting of 02-06-24
381 of 857
Glossary
| 198
G.O. Bonds
See general obligation bonds.
Grant Anticipation Notes (GANs)
GANs are short-term borrowings of a public entity to
eliminate cash flow deficits in anticipation of the receipt of a federal or state grant or loan. By issuing GANs, the public entity is better prepared to pay all project costs, particularly up front processing and managerial costs.
Grants
Contributions of cash or other assets from another
governmental agency to be used or expended for a
specified purpose, activity or facility.
Highway Users Tax Account (HUTA)
State transportation revenues from motor vehicle fuel taxes allocated to state and local governments by formula. See Section 6.02 of Chapter 6.
Homeowner’s Property Tax Relief Reimbursement
Revenue from the state to offset city loss of property tax for state-imposed $7,000 per dwelling homeowner exemption.
Improvement Bond Act of 1915
Act which allows cities, counties, and “public” districts to issue assessment bonds and bond anticipation notes. The 1915 Act does not authorize assessments.
Investment Earnings
Revenue earned from the investment of idle public funds.
Joint Powers Authority
The Joint Exercise of Powers Act authorizes local public agencies to exercise common powers and to form joint
powers authorities (JPAs) for the purpose of jointly
receiving or providing specific services.
JPA
See joint powers authority.
Landscaping and Lighting Act of 1972
The 1972 Act allows cities, counties and special districts to levy assessments for land purchase and the construction, operation, and maintenance of parks, landscaping, lighting, traffic signals and graffiti abatement.
Lease Revenue Bonds
Bonds similar to certificates of participation and used for the same types of projects with main exceptions that: 1) lessor must be either a governmental entity with the power to issue revenue bonds or a nonprofit corporation that
issues bonds on behalf of a political subdivision; and 2) the bonds constitute a direct debt of the lessor.
Levy
(Verb) To impose taxes, special assessments or service
charges for the support of governmental activities; (noun) the total amount of taxes, and/or special assessments and/ or service charges imposed by a governmental agency.
Library Services Special Tax
Special tax for providing public library facilities and services.
Licenses and Permits
Charge designed to reimburse city for costs of regulating activities being licensed, such as licensing of animals, bicycles, etc.
Lien
A claim on assets, especially property, for the payment of taxes or utility service charges.
Limited Obligation Bonds
Similar to general obligation bonds except that security for the issuance is limited exactly to the revenues pledged in the bond statement and not to the full faith and credit of the city.
Liquidity
The ability to convert a security into cash promptly with minimum risk of principal.
Local Agency Investment Fund (LAIF)
A special fund in the state treasury. Local governments may deposit in this fund through the state treasurer for investment purposes. See Section 5.07.
Maintenance of Effort (MOE)
A requirement, often as a condition of an
intergovernmental subvention or supplemental tax, to
maintain a level of spending at a certain level. Maintenance of Effort requirements are intended to prevent or limit the use of the additional revenues to supplant existing revenues such that the new revenues result in an increase in the level of program spending and services.
Marks-Roos Bonds
Bonds authorized by the Marks-Roos Local Bond Pooling
Act of 1985 which provide local agencies with extremely flexible financing powers through participation in joint powers authorities.
Market-Based Pricing
Recent trend in pricing public services which uses the
marketplace to regulate individual consumer behaviors
consistent with overall societal goals by including the true cost of the service on society.
Mello-Roos Bonds
Bonds allowing cities, counties, school districts and
special districts to finance certain public capital facilities and services, especially in developing areas and areas
undergoing rehabilitation. Property owners in the Mello- Roos district pay an annual special tax which is included on the property tax bill.
Mello-Roos Community Facilities Tax
Special non ad valorem tax imposed to finance public
capital facilities and services in connection with new
development. See Section 2.11.
Mello-Roos Community Facilities District
A distinct entity of government for the purpose of imposing and collecting the Mello-Roos Community Facilities Tax. The governing body and the boundaries of the district may be the same as for the city. See Chapter 2, Section 2.11.
Motor Vehicle Fuel Tax
An excise tax, applied per gallon, on fuel used to propel a motor vehicle or aircraft. Use of tax is limited to research, planning, construction, improvement, maintenance and
operation of public streets and highways or public mass transit guideways. Also called Highway Users Tax.
Motor Vehicle License Fee (VLF)
VLF is a fee for the privilege of operating a vehicle on public streets. VLF is levied annually at 2 percent of the market value of motor vehicles and is imposed by the state “in lieu” of local property taxes. VLF is also called Motor Vehicle in-Lieu Tax.
Municipal Improvement Act of 1913
The 1913 Act allowing cities, counties and special districts to fund everything included in the 1911 Act plus power and public transit facilities; assessments can be levied before construction begins.
Redlands Regular Meeting of 02-06-24
382 of 857
Glossary
199 |
Off-Highway Motor Vehicle License Fee
Fee imposed for the issuance or renewal of identification for every off-highway motor vehicle.
Nexus
In general, a minimum threshold of connection necessary within a taxing jurisdiction to allow taxing authority over out-of-state individuals or businesses. Requirement of
Government Code Sections 66000 et seq. that there
be a reasonable connection “nexus” between required
development impact fees and the development project in
question.
Ordinance
A formal legislative enactment by the governing board of a municipality. If it is not in conflict with any higher form of law, it has the full force and effect of law within the boundaries of the municipality to which it applies.
Parcel Tax
Special non ad valorem tax on parcels of property generally based on either a flat per-parcel rate or a variable rate depending on the size, use and/or number of units on the parcel.
Parking Tax
General tax imposed on occupant of off-street parking
space for the privilege of renting the space within the city.
See Section 2.09.
“Pay As You Use”
Concept that debt financing enables the public entity to spread the cost of a capital project over time, as the project is being utilized.
“Pay As You Go”
Concept of paying for capital projects when the initial cost is incurred, rather than over time through the use of debt financing.
Penalties
See fines, forfeitures and penalties.
Police and Fire Special Tax
Special tax on parcels of property in support of police and/ or fire protection services.
Portfolio
The collection of securities held by an individual or
institution.
Possessory Interest
Taxable private ownership of interests in tax-exempt public property.
Property-Related Fee
A levy imposed on a parcel or upon a person as an incident of property ownership for property-related service.
Property Tax
An ad valorem tax imposed on real property (land and
permanently attached improvements) and tangible
personal property (movable property).
Property Tax In Lieu of VLF
Property tax shares and revenues allocated to cities and counties beginning in FY 2004–05 as compensation for
Vehicle License Fee (VLF) revenues, previously allocated to cities and counties by the State. Referred to in statute as “Vehicle License Fee Adjustment Amounts.” See Section
2.01. Property Tax Increment
See Tax Increment Financing.
Proposition 1A (2004)
Voter-approved state constitutional amendment protecting most major city, county and special district revenues from reduction or shifting by the state Legislature. See Chapter 1.
Proposition 1A (2006)
Voter-approved state constitutional amendment protecting the local allocation of state transportation sales tax
revenues under Proposition 42 from reduction or shifting by the state Legislature. See Section 6.03.
Proposition 4 (1979)
Also called the Gann Initiative, this initiative, now
Article XIII B of the state Constitution, was drafted to be a companion measure to Proposition 13, California
Constitution Article XIII A. Article XIII B limits growth in government spending to changes in population and
inflation. See Chapter 10.
Proposition 8 (1978)
An amendment to Proposition 13, passed in November 1978 to allow Assessors to recognize declines in value for property tax purposes. Revenue & Taxation Code §51 requires the
Assessor to annually enroll either a property’s Proposition 13 base year value factored for inflation, or its market value as of January, whichever is less. See Section 2.01.
Proposition 13 (1978)
Article XIII A of the California Constitution, commonly known as Proposition 13, which limits the maximum
annual increase of any ad valorem tax on real property to 1 percent of the full cash value of such property.
Proposition 26 (2010)
A voter-approved amendment to articles VIII A and XIII C of the California Constitution defining the term “tax” to mean all government imposed charges, levies or exactions except for seven specified exceptions. Any locally imposed charge that falls outside of the exceptions is a tax and requires voter approval.
Proposition 30 (2011)
Voters approved temporary increases in the state personal income tax and sales tax. Proposition 30 also provides
certain guarantees of funding to counties for programs
realigned from the state.
Proposition 42 (2002)
Voter-approved measure that directs the Legislature to
allocate revenues derived from the taxable sales of gasoline to certain transportation programs including to cities and counties. See Section 6.03.
Proposition 62 (1986)
A 1986 proposition which, among other things,
implemented a majority vote requirement for general
taxes. This portion of Proposition 62 was later ruled
unconstitutional.
Proposition 98 (1990)
This measure establishes a minimum level of funding for public schools and community colleges and provides that any state revenues in excess of the appropriations limit be spent on schools.
Proposition 111 (1994)
Voter-approved measure that increased the state Motor
Vehicle Fuel Tax by 9 cents per gallon and made certain adjustments to the spending limits under Proposition 4
(1979). See Section 6.02 regarding the Motor Vehicle Fuel Tax and Chapter 10 regarding Proposition 4 spending limits.
Proposition 172 (1993)
A 1993 measure which places a one-half cent sales tax for local public safety in the constitution, effective January 1, 1994. The tax is imposed by the state and distributed to cities and counties.
Redlands Regular Meeting of 02-06-24
383 of 857
Glossary
| 200
Proposition 218 (1996)
A voter-approved state Constitutional amendment, self-
titled “Right to Vote on Taxes Act” expanded restrictions on local government revenue-raising, allowing the voters to repeal or reduce taxes, assessments, fees and charges through the initiative process; reiterating the requirement for voter approval for both “special taxes” and “general taxes,” and imposing procedural and substantive limitations on assessments of real property and on certain types of fees.
Principal
“Face” or “par value” of an instrument. It does not include accrued interest.
Rating
The designation used by investors’ services to rate the quality of a security’s creditworthiness.
Real Property
Land and permanently attached improvements.
Real Property Transfer Tax
Tax imposed on the transfer of ownership in real estate.
Typically imposed instead of a Documentary Transfer Tax.
Only Charter cities may impose a Real Property Transfer Tax. See Chapter 2, Section 2.07.
Reimbursement for State Mandated Costs
Article XIII B, Section 6 of the California Constitution which requires the state to reimburse local agencies for the cost of state-imposed programs. Process is commonly called “SB 90” after its original 1972 legislation.
Regulatory Fee
A charge imposed on a regulated action to pay for the cost of public programs or facilities necessary to regulate a business or other activity or mitigate the impacts of the fee payer on the community. A regulatory fee does not include a charge on a property or a property owner solely due to property ownership.
Rents
Revenues received through the rental of public properties to private parties such as convention space and library facilities.
Resolution
A special or temporary order of a legislative body requiring less formality than an ordinance.
Revenue
Annual income received by the city.
Revenue Bonds
Bonds issued to acquire, construct or expand public
projects for which fees or admissions are charged. Bonds are repaid solely from the income generated by use of that project.
Road Maintenance and Rehabilitation Account
(RMRA)
Certain state tax revenues for local streets and roads and other transportation uses are allocated through RMRA from the Road Repair and Accountability Act of 2017 (SB1 Beall).
See Section 6.02 of Chapter 6.
Rough Proportionality Test
Specific determination by the city for a specific
development project that the dedication to be required
is related both in nature and extent to the development’s impact (Dolan v. City of Tigard (1994) 94 D.A.R. 8803).
Royalties
Revenues received from private companies for privilege
of extracting natural resources from city property. Also revenues from bets placed at horse racing tracks that are located within the city, currently set by statute at one third of 1 percent.
Sales Tax
A tax imposed on the total retail price of any tangible personal property. See also “use tax.” See section 2.02.
SB 90
Reimbursement process for state mandated costs, named
after its original 1972 legislation.
SB 1977
1992 bill (Government Code, Section 54945.6 as amended) requiring local officials to mail notice of new and increased benefit assessments and to hold public hearings prior to imposing benefit assessments.
Secured Property
As the property tax is guaranteed by placing a lien on
the real property, secured property is that real property in which the value of the lien on the real property and personal property located thereon is sufficient to assure payment of the tax.
Secured Roll
That property tax list containing all assessed property secured by land subject to local taxation.
Securities
Investment instruments such as bonds, stocks and other
instruments of indebtedness or equity.
Service Charges
Charges imposed to support services to individuals or to cover the cost of providing such services. The fees charged are limited to the cost of providing the service or regulation required (plus overhead).
Short-Term Financing Methods
Techniques used for many purposes, such as meeting
anticipated cash flow deficits, interim financing of a project and project implementation. Using these techniques
involves issuance of short-term notes. Voter approval is not required.
Special Tax
A tax that is collected and earmarked for a special purpose and deposited into a separate account. A two-thirds vote of the electorate is required to impose, extend or increase any special tax. See also “general tax.”
Standby Charge
A compulsory charge levied upon real property to defray in whole or in part the expense of providing, operating or maintaining public improvements. The charge is “exacted for the benefit which accrues to property by virtue of
having water [or other public improvement] available
to it, even though the water might not be used at the
present time.” Proposition 218 classifies standby charges as “assessments” which must be imposed in compliance with
Section 4.25 of California Constitution Article XIII D.
Street Lighting Act of 1919
Act authorizing cities to fund the maintenance and
operation of street lighting.
Subvention
Subsidy or financial support received from county, state or federal government. The state and county currently
levy certain taxes that are “subvened” to cities, including motor vehicle license fees, state mandated costs and motor vehicle fuel tax.
Redlands Regular Meeting of 02-06-24
384 of 857
Glossary
201 |
Supplemental Law Enforcement Services Fund
County level fund to contain monies from the Citizens
Option for Public Safety state subvention for local law enforcement initiated in 1996. See Section 6.04.
Supplemental Property Tax
In the event a property changes ownership, the county
collects a supplemental property tax assessment in the
current tax year by determining a supplemental value. In future tax periods, the property carries the full cash value.
Tangible Personal Property
Movable property.
Tax
Compulsory charge levied by a government for the purpose of financing services performed for the common benefit.
Tax Allocation Bonds
Bonds issued by redevelopment agencies to revitalize
blighted and economically depressed areas of the
community and to promote economic growth.
Tax Base
The objects or transactions to which a tax is applied
(e.g., parcels of property, retail sales, etc.). State law or local ordinances define the tax base and the objects or transactions exempted from taxation.
Tax Equity Allocation (TEA)
Supplemental property tax allocations shifted to certain “no and low property tax cities” from counties. TEA is also used in reference to other supplemental allocations of
Vehicle License Fee (VLF) revenues provided to certain no and low property tax cities. These VLF-TEA allocations now flow to those cities as a part of Property Tax in lieu of VLF payments.
Tax and Revenue Anticipation Notes (TRANs)
TRANs are short-term borrowings by a public entity to meet cash flow needs in the general fund and other unrestricted funds of a public entity. TRANs are issued before expected receipt of taxes and other revenues during the same fiscal year.
Tax Increment Financing
A tax incentive designed to attract business investment by dedicating to the project area the new property tax
revenues generated by redevelopment. The increase in
revenues (increment) is used to finance development-
related costs in that district.
Tax Rate
The amount of tax applied to the tax base. The rate may be flat, incremental or a percentage of the tax base, or any other reasonable method.
Teeter Plan
Enacted in 1949, an alternative method for allocating
delinquent property tax revenues, authorized by Revenue and Taxation Code section 4701, in which the county
Auditor allocates property tax revenues based on the total amount of property taxes billed, but not yet collected.
The county government then collects and keeps the
delinquency, penalty and interest payments.
Traffic Congestion Relief Program (TCRP)
Revenues from state sales taxes on vehicle fuels dedicated to transportation purposes by Proposition 42 (2002) and allocated to state and local governments. See Section 6.02 of Chapter 6.
Traffic Safety Fund
All fines and forfeitures received as a result of arrests by city officers for Vehicle Code violations must be deposited in a special city “Traffic Safety Fund” to be used for traffic control devices; maintenance of equipment and supplies
for traffic law enforcement and traffic accident prevention; the maintenance, improvement or construction of public
streets, bridges or culverts; and the compensation of school crossing guards who are not regular full-time members of the police department.
TRANs
See tax and revenue anticipation notes.
Transactions and Use Tax
Also, known as an “add-on local sales tax,” a tax imposed on the total retail price of any tangible personal property and the use or storage of such property when sales tax is not paid. See Section 2.03.
Transient Occupancy Tax
Tax levied by cities on persons staying 30 days or less in a room(s) in a hotel, inn, motel, tourist home, non- membership campground or other lodging facility. Also
called Transient Lodging Tax or Hotel Tax. See Section 2.06.
Transportation Improvement Fee
State tax on motor vehicle registrations adopted under the Road Repair and Accountability Act of 2017 (SB1 Beall). See Section 6.02 of Chapter 6.
Triple Flip
A mechanism used to repay state fiscal recovery bonds
pursuant to Proposition 57 of 2004. Under the Triple
Flip, the local sales and use tax rate was reduced from
1.00 percent to 0.75 percent with the 0.25 percent diverted to repay state fiscal recovery bonds. Cities and counties were reimbursed for the lost revenue from a shift of
property tax revenue.
Tideland Revenue
Revenues granted by the state for use of city tideland in production of oil, gas and other hydrocarbons.
Transportation Tax
Special tax imposed by counties for county transportation needs. Typically collected with the sales and use tax, some cities receive a portion of the transportation tax usually in .25 percent tax rate increments.
Unsecured Property
As the property tax is guaranteed by placing a lien on the real property, unsecured property is that real property in which the value of the lien is not sufficient to assure payment of the property tax.
Use Tax
A tax imposed on the use or storage of tangible personal property when sales tax is not paid. See also “sales tax.” See Section 2.02.
User Fee
Fees charged for the use of a public service or program such as for recreation programs or public document
retrieval. User fees for property-related services are
referred to as property-related fees. See Chapter 4.
Utility Connection Fee
Utility connection fees or capacity fees are imposed on the basis of a voluntary decision to connect to a utility system or to acquire the right to use additional capacity. See Chapter 4.
Redlands Regular Meeting of 02-06-24
385 of 857
Glossary
| 202
Utility Rate
A category of user fee paid by the user of utility services.
See Chapter 4.
Utility Users Tax
Tax imposed on the consumer (residential and/or
commercial) of any combination of electric, gas, cable
television, water and telephone services. See Section
2.05. Vehicle Parking District Law of 1943
The 1943 Act allows cities and counties to
purchase land for parking structures, construct and
maintain parking lots and pay for related planning.
VLF
See Motor Vehicle License Fee.
VLF — Property Tax Swap
The trade of most city and county Vehicle License Fee
revenue for additional property tax share and revenue. See Section 2.01 and Section 6.01.
Vehicle Registration Fees
See Vehicle Registration Taxes, Chapter 2, Section 2.13.
Vehicle Registration Taxes
A special tax on vehicle registration imposed countywide for specific purposes authorized in state law. See Chapter 2, Section 2.13.
Voter Approved Property Tax for Indebtedness
Includes ad valorem property taxes levied in addition to the 1 percent rate for voter approved debt, approved prior to July 1, 1978 or after July 1, 1986.
Williamson Act and Open Space Subvention
State subvention to foster preservation of open-space by lowering cost of property tax.
Yield
The total amount of revenue a government expects to
receive from a tax, determined by multiplying the tax
rate by the tax base. Also, the annual rate of return on an investment, expressed as a percentage of the investment.
Redlands Regular Meeting of 02-06-24
386 of 857
Strengthening California Cities
through Advocacy and Education
Mayors and Council
Members Academy
Effective Advocacy and
Key City Issues
January 25, 2024
Advocacy and Public Affairs
League of California Cities
Redlands Regular Meeting of 02-06-24
387 of 857
Moderator
Jason Rhine
Director of Legislative Affairs,
League of California Cities
[email protected]
Redlands Regular Meeting of 02-06-24
388 of 857
Lobbyists
• Damon Conklin
Legislative Affairs, Lobbyist
T
ransportation, Communications, and
Public Works
[email protected]
• Melissa Sparks-K ranz
Legislative Affairs, Lobbyist
E
nvironmental Quality
[email protected]
Redlands Regular Meeting of 02-06-24
389 of 857
Lobbyists
• Caroline Grinder
Legislative Affairs, Lobbyist
Co
mmunity Services
[email protected]
• Johnnie Pi ña
Legislative Affairs, Lobbyist
G
overnance, Transparency, and Labor
Relations
j [email protected]
Redlands Regular Meeting of 02-06-24
390 of 857
Lobbyists
• Ben Triffo
Legislative Affairs, Lobbyist
R
evenue and Taxation
[email protected]
• Jolena Voorhis
Legislative Affairs, Lobbyist
Public Safety
[email protected]
• Brady Guertin
Legislative Affairs, Lobbyist
Ho
using, Community and Economic
Development
[email protected]
Redlands Regular Meeting of 02-06-24
391 of 857
Agenda
• Cal Cities Advocacy Overview
• Your Role as an Advocate
• 2024 Ad vocacy Priorities and Issues
Redlands Regular Meeting of 02-06-24
392 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Cal Cities Advocacy:
How Policy is Developed
Redlands Regular Meeting of 02-06-24
393 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Cal Cities Advocacy
Redlands Regular Meeting of 02-06-24
394 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Legislative Advocacy
• Protect the common interests of cities statewide
• Protect and promote local decision-m aking
• Seek and protect state and federal funding to support c
ities
• Implement grassroots activities in conjunction with specific a
dvocacy campaigns in partnership with the Regional
Public Affairs Managers
Redlands Regular Meeting of 02-06-24
395 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Legal Advocacy
• Represent the interests of California cities in federal a
nd state courts
• File friend-of-th e-court briefs and letters in appellate courts and with state Attorney General for cases
affecting local authority
Redlands Regular Meeting of 02-06-24
396 of 857
Ballot Measure Advocacy
2018 2010 2008 2006 2004
Prop. 6
Protect
Transportation Funds
Prop. 22
Protect
Transportation and
Local Funds
Prop. 98/99
Protect City Rent
Control and
Land Use
Prop. 90
Protect City Land Use
Authority
Prop. 1A
Protect Local
Revenues from State
Raids
Redlands Regular Meeting of 02-06-24
397 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Cal Cities Policy Influencers
11 Lobbyists and Policy
Analysts 57
Board
Members
16 Regional Public Affairs
Managers
16 400+
510
75 Diversity
Caucuses
Regional
Divisions
Policy Committee
Members
Municipal
Departments
Cal Cities
Partners
Redlands Regular Meeting of 02-06-24
398 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Cal Cities Policy Arenas
• General Assembly
• Division Meetings
• Policy Committees
M
eetings
• Board of Directors
M
eetings
Redlands Regular Meeting of 02-06-24
399 of 857
Policy Committees
• Community Services
• Environmental Quality
• Governance, Transparency, and
L
abor Relations
• Housing, Community, and
E
conomic Development
• Public Safety
• Revenue and Taxation
• Transportation, Communications,
a
nd Public Works
Redlands Regular Meeting of 02-06-24
400 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org California Civic Leadership Institute (CCLI)
Provides a forum to help inform and prepare local
officials interested serving in the Legislature.
Redlands Regular Meeting of 02-06-24
401 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Your Role as an Advocate
Sara Sanders and Jennifer Quan
Regional Public Affairs Managers
Redlands Regular Meeting of 02-06-24
402 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Regional Public Affairs Managers
Sara Sanders
Redwood Empire
Charles Anderson
Sacramento
Valley
Nancy Hall
Bennett North Bay
Sam Caygill
East Bay
Seth Miller
Peninsula
Deanna Sessums
Monterey Bay
Stephen Qualls
Central Valley
Rajveer Rakkar
South San
Joaquin Valley
David Mullinax
Channel Counties
Jeff Kiernan
Los Angeles
County
Kristine Guerrero
Los Angeles
County
Jennifer Quan
Los Angeles
County
Connor Medina
Orange County
Jesse Ramirez
Riverside County
Laura Morales
Desert Mountain
Inland Empire
Catherine Hill
San Diego County
Imperial County
Redlands Regular Meeting of 02-06-24
403 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Regional Public Affairs Managers
Your main point of contact at Cal Cities for:
• Legislative developments
• Insights on political dynamics influencing legislation • Calls to action
Redlands Regular Meeting of 02-06-24
404 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Advocacy Strategies
• Communicate your city's position
Position letters
Contacting your legislators
• Coordinate with your regional public affairs manager
Redlands Regular Meeting of 02-06-24
405 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Relationship Building
• Legislators and district staff
• Administration officials
• County officials
• Special district officials
• Local opinion leaders and o rganizations
• Local media outlets
Redlands Regular Meeting of 02-06-24
406 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Get Informed
Like, follow, and share Cal Cities news!
• Twitter: @ CalCities
• Facebook: l eagueofcities
• Instagram: ca lcities
• YouTube: l eagueofcacities
• LinkedIn: ca lcities
Redlands Regular Meeting of 02-06-24
407 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org 2024 Advocacy Priorities
Redlands Regular Meeting of 02-06-24
408 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org 2024 Cal Cities Advocacy Priorities
1. Safeguard local revenues and bolster local
e
conomic development
2. Strengthen climate change resiliency and
d
isaster preparedness
3. Improve public safety in California
c
ommunities
4. Expand investments to prevent and reduce
h
omelessness and increase the supply of
affordable housing
Redlands Regular Meeting of 02-06-24
409 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Cal Cities Budget Request
• Cal Cities calls on the state to:
Honor funding commitments to cities made in the 2023-2 4 budget Create a permanent, dedicated funding stream of $3 billion a
nnually to address homelessness and construct more affordable housing
Safeguard local revenues
Redlands Regular Meeting of 02-06-24
410 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org 2024 Look Ahead
Advocacy Team
League of California Cities
Redlands Regular Meeting of 02-06-24
411 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Proposed 2024-25 State Budget
Overall, the Governor’s proposed $291.5
billion budget:
• Forecasts a deficit of $38 billion in 2024-25
• Assumes continued steady growth; does not
assume
a recession
• Proposes to draw from the state’s reserve
a
ccounts to close the budget gap
Redlands Regular Meeting of 02-06-24
412 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Proposed 2024-25 State Budget
Overall, the Governor’s proposed $291.5
billion budget:
• Does not include redirection of city funds to
address
state budget shortfalls
• Does not include deep cuts to most ongoing
p
rograms
• Draws upon $13.1 billion in reserves
However
…
Redlands Regular Meeting of 02-06-24
413 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Proposed 2024-25 State Budget
Overall, the Governor’s proposed $291.5 billion
budget:
• Does not include new, ongoing funding to address
the housing supply and homelessness
• Climate change and housing received the largest
cuts
Redlands Regular Meeting of 02-06-24
414 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Balancing the Budget
The proposed budget is balanced with a
combination of:
• $13.1 billion in reserves
• $8.5 billion in spending reductions
• $5.7 billion in internal borrowing
• $5.1 billion in delays
• $3.4 billion in shifts$2. 1 billion in
deferrals
Redlands Regular Meeting of 02-06-24
415 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Revenue and Taxation
Potential Issues in 2024:
• New tax exemptions
• Short-t erm rentals
• Property Tax Allocation
• 2024 Ballot measures
• Sales tax rebate agreements
Redlands Regular Meeting of 02-06-24
416 of 857
Community Services in the Budget
• Homelessness: M aintains $3.4 billion General Fund in 2023-24 to address homelessness
• Behavioral Health: L argely maintains funding for critical investments made in recent years with delays to several key programs
• Child Care: M aintains funding for subsidized child care slots and includes $2.1 billion to fund roughly 146,000 new slots • Parks and Open Space: R educes funding for Outdoor Equity Grants by $25 million
• Libraries: P ulls back $131.3 million for the Local Library Infrastructure Grant Program and forgoes planned investments of $33 million in 2024-25, $33 million in 2025-26, and $34 million in 2026-27
Redlands Regular Meeting of 02-06-24
417 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Community Services
Potential Issues in 2024:
• Accountability and transparency for state homelessness f
unding
• Ongoing funding to address homelessness
• Proposition 1
• Sober living homes and recovery housing
• Overdose prevention
• Seniors and aging
• Community disaster preparedness
Redlands Regular Meeting of 02-06-24
418 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Environmental Quality in the Budget
• 2024-2 5 budget proposal makes significant changes to the prior budget’s climate commitments
• Maintains 89% of the $54 billion ($48.3 billion) dedicated over f
ive years (which is shifted in the proposal to seven years) $2.9 billion in reductions
$1.9 billion in delays of expenditures to future years $1.8 billion in shifts to other funds (primarily the Greenhouse Gas Reduction Fu
nd) for climate-related programs
Redlands Regular Meeting of 02-06-24
419 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Environmental Quality
Potential Issues in 2024:
• Legislative:
Climate Bonds
Qualifying Logistics Use Projects
Organic Waste (SB 1383 Implementation)
Emergency Preparedness/Disaster Relief
• Regulatory:
Single Use Plastic and Packaging Recycling Regulations (C alRecycle) Long-T erm Water Conservation Regulations (State Water Board) Sea Level Rise (Coastal Commission, Ocean Protection Council) Redlands Regular Meeting of 02-06-24
420 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Governance, Transparency, and Labor Relations
in the Budget
• State Employees’ Retirement Contributions:
$6.9 billion ($3.5 billion General Fund) for the statutorily required an
nual state contribution to CalPERS for state pension costs in 2024- 25 • Information Technology System Upgrades and Modernizations Unemployment Insurance Trust Fund Loan Interest
EDDNext
Division of Workers’ Compensation
Workforce
California Jobs First (formerly the Community Economic Resilience F
und)
Apprenticeship Innovation Fund
Redlands Regular Meeting of 02-06-24
421 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Governance, Transparency, and Labor Relations
Potential Issues in 2024:
• Brown Act and Public Meeting Modernization
• Artificial Intelligence
• Public Records Act Requests
• Campaign Finance
• Pension Sustainability a nd Divestment
• California Voting Rights Act and Redistricting
• Labor Relations
• Cybersecurity
Redlands Regular Meeting of 02-06-24
422 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Housing, Community, and Economic
Development in the Budget
• $500 million cut to the Low Income T ax Credit Program • $300 million cut to the Regional Early Action Planning Grants 2.0 (R
EAP 2.0)
• $250 million cut to the Multifamily Housing Program
• $247.5 million cut to the Foreclosure Intervention Housing P
reservation Program
Redlands Regular Meeting of 02-06-24
423 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Housing, Community, and Economic
Development in the Budget
• $200 million cut to the Infill Infrastructure Grant Program • $152.5 million cut to the Cal Home Program
• $50 million cut to the Veteran Housing and Homelessness P
revention Program
• $13.7 million cut to the Housing Navigators Program
Redlands Regular Meeting of 02-06-24
424 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Housing, Community, and Economic
Development
Potential Issues in 2024:
• By-R ight Approvals of Adaptive Reuse and Office Conversion Projects
• Round 7 RHNA Reforms –
HCD Study Pending
• Housing Bond
• Mitigation Fees Limits or Deferrals
• Enforcement of State Housing Law by the Attorney General • Potential Legislative Responses to Supreme Court Rulings – Sheetz vs. County of El Dorado
Redlands Regular Meeting of 02-06-24
425 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Public Safety in the Budget
The 2024-25 budget proposal provides some ongoing funding for fentanyl and no cuts to the retail theft programs. However, there are some cuts to wildfire funding:
• Fentanyl Response: $30 million i n additional investment • Planned Prison Closures: $9.6 million in General Fund savings • Cannabis Funding: Loan of $100 million from the Cannabis Tax Fu
nd to the General Fund
• Climate Change/Wildfires: $ 100.7 million in reversion for various climate programs including wildfire prevention programs Redlands Regular Meeting of 02-06-24
426 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Public Safety Issues
Potential Issues in 2024:
• Retail Theft including potential changes to Proposition 47 • Fentanyl Response
• Cannabis Reform
• Emergency preparedness/response
Redlands Regular Meeting of 02-06-24
427 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Transportation, Communications, and Public Works
in the Budget
2024-25 budget proposes using a combination of shifting and delaying of funds to maintain previous commitments to
statewide transportation projects.
• Broadband
$1.5 billion to make up for an anticipated shortfall in the Broadband for All i
nfrastructure funding
• Transportation Funding: 9 9% of previous investments
maintained
Transit Intercity Rail: Delays $1 billion in g rant funding Active Transportation: Reduces $200 million
Zero-E mission Vehicles: Delays $45 million in grants Redlands Regular Meeting of 02-06-24
428 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Transportation, Communications, and Public Works
Potential Issues in 2024:
• Protecting SB 1 Revenues/Exploring Sust ainable
Alternative Funding Sources
• Autonomous Vehicles/Public Safety
• Advanced Clean Fleet Regulation Compliancy
• EVCS P ermitting and Deployment
• Energy Storage Permitting and Deployment
Redlands Regular Meeting of 02-06-24
429 of 857
Strengthening California Cities through Advocacy and Education @calcities @calcities @calcities.org Questions?
Redlands Regular Meeting of 02-06-24
430 of 857
SAVE THE
DATE
April 17-19, 2024 Sacramento, CA
City Leaders SUMMIT
Redlands Regular Meeting of 02-06-24
431 of 857
Strengthening California Cities
through Advocacy and Education @calcities @calcities @calcities.org THANK YOU!
Redlands Regular Meeting of 02-06-24
432 of 857
City Council Meeting J. 4.
DATE: 02/06/2024
TO: Honorable Mayor and City Council Members
SUBJECT: Discussion and possible action relating to the Bicycle Rideshare Program (Facilities and Community Services Department Director Crocker)
DISCUSSION:
On August 22, 2023, the Redlands City Council called a special meeting to discuss project and program priorities for individual Council members and the City Council as a whole. One of the priority items included researching the feasibility of a City bicycle share program. A Bike Share Program is a transportation initiative designed to offer users access to bicycles for short, point-to-point trips within a designated service area, often integrated with various transportation modes. The evolution of bike share systems continues on a global scale, diversifying user interfaces and rental options. Studies have also concluded that the implementation of these programs has resulted in positive impacts on communities, including but not limited to environmental factors, health, convenience, and reduced traffic congestion. The bike share programs vary in operation and ownership and appear to cater to the individual needs of each community. For example, they may include contracted vendors and/or city-owned bikes; they include dock stations or dock-less stations; and, they may include non-electric bikes, electric bikes, and/or electric scooters.
At the direction of the City Council, staff performed surveys and conducted research on some surrounding jurisdictions with a bike sharing program to obtain feedback on the implementation of similar programs within our city. The cities surveyed include Rialto, Riverside, Claremont, Palm Springs and West Hollywood. Overall, the programs were positive and share similar goals that are intended to provide an affordable and convenient mode of travel for both residents and visitors.
Redlands Regular Meeting of 02-06-24
433 of 857
Outreach:
Rialto
The City of Rialto launched their Bicycle Sharing Program in July 2023, and entered into an agreement with Bewegen Technologies, Inc. They have approximately six stations and thirty bicycles with the potential to expand to 125 bikes. The program aims to increase equitable transportation access, safety for bicyclists and first/last mile connections to transit. The City of Rialto obtained grant funding to perform a bike share assessment study to determine the viability of the program. The bike share study performed, included a demand analysis, equity analysis and public outreach was used to identify station locations.
According to the study, results indicated that 50% of residents are interested in the program for short trips, while 25% are interested in the program to connect to transit stops for work. The study was performed by Alta Planning for a total cost of $186,332. The project cost for the period of 5 years is about $1,000,000 and funded by various grants. Maintenance and operation costs are included in this price. Upon recent communication with the City of Rialto regarding the program's performance, it was noted that it was not performing as well as anticipated.
Riverside
The City of Riverside launched the Bike Riverside program in November 2018.
The City Council approved an agreement with Bewegen Technologies Inc. for the program's implementation. The program offers 55 electric pedal-assist bicycles and seven stations in key areas; including the Judicial Plaza, Riverside City College, Fox Plaza, the Riverside Convention Center, and the Downtwon Metrolink Station. The program aims to provide an affordable, nonpolluting and convenient mode of transportation, particularly beneficial for short trips and enhancing connectivity to schools, local businesses, and light rail. The program is funded by grants with the intention of improving air quality and reducing traffic. The city offers various pass options, including a single trip, a day pass, monthly pass, and annual membership passes.
West Hollywood
The City of West Hollywood launched a pilot program in July 2021 for an initial term of 18 months. The program has been extended through September 2025 and includes three authorized e-scooter and e-bike operator companies, including Bird, Lime, and Wheels. The program includes electric bikes and scooters with deployment limited to 100 active devices per day per company through a dockless system. The program aims to reduce reliance on passenger vehicles, enhance mobility, and align with climate action goals. Staff implemented roughly 35 physical designated parking stations throughout the city. Physical designated parking stations are marked areas, on and off-street, where devices are recommended to be parked. An online community survey was conducted to evaluate the program via the city's website, social media profiles, and mobility operator email to users; there was a total of 843 responses Redlands Regular Meeting of 02-06-24
434 of 857
that were collected for the survey and 53% were scooter users. Of these responses, 91% stated they were residents, working or both in the city. The survey was able to capture a balance of riders and non-riders, with 53% answering that they had used a scooter in the city while 46% had not. Benefits stated include alternative transport, reduced vehicular traffic, and environmental advantages with challenges including safety concerns, improper parking and impact on pedestrian pathways.
Oakland
On a larger scale, the City of Oakland has a program effective from July 2021 to July 2027 for a period of ten years. The agreement is with Bay Area Motivate LLC, which is now operated as "Bay Wheels" by Lyft. The program includes 1250 dockless electric bikes with designated parking areas located throughout the city. The program aims to improve mobility, environmental sustainability, and transit connectivity. Public outreach was conducted during various phases and meetings with the community. The program operates at no cost to the city and is grant funded from the Bay Area Air Quality Management District. The city offers various pass options, including a single trip, a day pass, monthly pass, annual membership passes and discounted membership programs. Benefits stated in this program include enhanced mobility, reduced environmental impacts, and equitable transportation with challenges including the need for consistent regulatory compliance, theft and vandalism.
Conclusion:
The overall sentiment from communities has been positive. The bike-share programs have successfully contributed to the well-being and connectivity of these cities, demonstrating the potential benefits for alternative transportation modes, environmental factors and reduced traffic congestion. It appears that all programs were either funded or heavily supported by grant funding. There was also a mix of approaches to implementing these programs, including pilot programs or short-termed agreements and conducting survey or assessment studies either in-house or through a third party. Overall, it did appear that feedback from the community provided direction on the locations of stations and number of bikes. The common feedback from several cities for dock station systems lauded the requirement for bikes to be parked in designated docking stations at the end of rides. This practice prevents overcharging and ensures efficient use of the system. For the dock-less station systems, cities lauded the requirement for designated areas for the parking of bikes or scooters. Some common challenges include theft and vandalism and its impact on operational efficiency and unexpected cost. While this concern has been raised, it is essential to acknowledge that these challenges are not unique to any specific bike-share model.
Redlands Regular Meeting of 02-06-24
435 of 857
Options:
If the City Council determines that advancement of a bike sharing program is desirable, city staff would offer the following options:
Explore grant funding opportunities or partnerships;
1. Issue an RFP to enter into an agreement with a private company for a pilot program or short-termed agreement;
2. Issue an RFP to conduct a Bicycle Sharing Program Assessment and identify specific characteristics of our community and station locations; and
3. No action4.
Redlands Regular Meeting of 02-06-24
436 of 857
City Council Meeting K. 1.
DATE: 02/06/2024
TO: Honorable Mayor and City Council Members
SUBJECT: Consideration of the 2024-2025 Community Development Block Grant Program Year proposed project listing, and authorization for submittal of the 2024-2025 Cooperating City Recommended Projects Form to the County of San Bernardino Community and Housing Division (Development Services Director Desatnik) MOTION(S):
If the City Council determines that the staff’s recommendation is appropriate, the following motion is provided:
I move to direct staff to prepare the 2024-2025 Community Development Block Grant Program Cooperating City of Recommended Projects Form using the recommendation in this report and submit it to the County of San Bernardino Community Development and Housing Division prior to the February 13, 2024, deadline.
RECOMMENDATION:
Staff recommends the City Council approve the following funding requests for the projects listed below based on an evaluation and analysis of all the applications submitted, received and deemed eligible for the 2024-2025 Community Development Block Grant (CDBG) Program Year beginning on July 1, 2024:
Redlands Regular Meeting of 02-06-24
437 of 857
No. Provider Project/Program Amount
1 Redlands Senior Community
Center Project
Kitchen Rehabilitation $284,019.85
2 Family Service
Association/Redlands
Housing and Food
Assistance
$ 7,500.00
3 Boys & Girls Club of Greater
Redlands - Riverside
Food Distribution $ 7,500.00
4 YMCA of the East Valley Legal Aid Services $ 7,500.00 5 Citrus Counseling Services Mental Health Services $ 5,121.00 6 The Nowell Family Foundation,
Inc.
Housing and Recovery
Services
$ 7,500.00
7 Partners Against Violence Supportive Services for
Victims of Violence
$ 7,500.00
8 The Blessing Center, Inc. Transitional Housing
Assistance
$ 7,500.00
DISCUSSION:
The County of San Bernardino (County) released the annual CDBG Notice of Funds Availability (NOFA) to the public on Monday, November 6, 2023, for the 2024-2025 CDBG Program Year that begins July 1, 2024. The NOFA solicited applications from eligible non-profit public service agencies (PSAs) as well as applications for other CDBG activities such as capital improvement projects (CIPs) for funding consideration by the City Council. (Attachment A) The County establishes each participating city's annual allocation based on the most current U.S. Census statistics for poverty, overcrowded housing conditions and population. The estimated allocation for Redlands Fiscal Year (FY) 2024-2025 is $334,141, which represents no change from the prior FY award.
Each year this allocation is an estimate subject to change dependent upon federal appropriations and the final allocation to the County's CDBG Participating Cities Program from the Department of Housing and Urban Development (HUD). The County limits the number of total allowable projects that each participating city can fund annually. Redlands is limited to a maximum of nine (9) allowable projects, of which only two (2) can be CIPs with a minimum award of $75,000 per project and a maximum cap of 15% of the City's overall annual CDBG allocation is available to fund eligible PSAs, or $50,121.15 for FY 2024-2025. (Attachment B)
In response to this year’s NOFA, the County received a total of nine (9) applications for Redlands, of which seven (7) are eligible PSAs, one (1) eligible City CIP and one (1) PSA application was deemed ineligible by the County. The total funding requests for eligible applications was $527,481, of which $380,000 for the City CIP and $147,481 for the PSAs. The County determines eligibility based on their consistency with CDBG National Objectives and the strategies Redlands Regular Meeting of 02-06-24
438 of 857
based on their consistency with CDBG National Objectives and the strategies and goals of the Consolidated Plan. A list of all applications received with a brief description of the proposed CDBG project is attached to this report (Attachment C).
Staff is recommending funding the City CIP for the Redlands Senior Community Center Rehabilitation Project (Center) which includes a kitchen renovation comprised of installation of energy-efficient kitchen appliances, LED lighting upgrades and a flooring overhaul in the amount of $287,703.53 which includes $3,683.53 in unprogrammed funds from prior years allocations (see Attachment C). This Center is also a cooling center, serves senior meals and this project will also address compliance with the Americans with Disabilities Act requirements.
Further recommendations include funding all seven (7) of the eligible PSA applications. A comprehensive eligibility analysis was completed for all PSA applications received. Four (4) of the PSA's have a history of providing services to the residents of the City and are consistent with previous Council CDBG funding priorities, have demonstrated the ability to successfully meet project objectives and perform the administrative obligations of the CDBG program. One (1) PSA application for The Blessing Center, Inc., is new to CDBG in the current FY and two (2) new PSA applications are for Citrus Counseling Services and The Nowell Family Foundation, Inc. and are recommended for approval.
While there is no minimum award for PSA projects, administration of a CDBG project, which is the responsibility of City staff, can be very time-intensive. For this reason, the City Council previously determined a minimum award of $7,500.
The City does not receive any portion of the CDBG award to administer the program, thereby making it a general fund expense. However, staff is recommending six (6) of the awards in the amount of $7,500, which meets the minimum funding award threshold and one (1) in the amount of $5,121 to Citrus Counseling Services’ as their funding request was only $5,364; their services are eligible, align with the funding priorities of the City Council as well as with the CDBG National Objectives (see Attachment C). In subsequent years, a more comprehensive eligibility analysis may be necessary in determining future funding awards depending on the number of eligible PSA applications received.
The City's 2024-2025 final funding recommendations will be included in the 2024-2025 Annual Action Plan prepared by the County and presented to the County Board of Supervisors during a public hearing to be held in April 2024.
Once approved, the 2024-2025 Annual Action Plan will be submitted by the County to HUD prior to the May 15, 2024, deadline. Once the County's 2024-2025 Annual Action Plan is approved by HUD, the City will be notified of the award, at which time a staff report and resolution will be presented on a future City Council date for proposed acceptance of the grant award and approval of the resolution. The approved 2024-2025 CDBG Funding would then become available to awardees on July 1, 2024.
Redlands Regular Meeting of 02-06-24
439 of 857
ALTERNATIVES:
The City Council may elect not to approve the funding recommendations and provide alternative funding recommendations within the funding thresholds described in this report. However, electing not to submit the 2024-2025 Cooperating City Recommended Projects Form to the County by the February 13, 2024, deadline may result in a loss of the CDBG funding for FY 2024-2025 and could result in a reduction of or loss of funding in future years.
STRATEGIC PLAN:
Not Applicable
SUBMITTED BY:
Brian Desatnik, Development Services Director
RECOMMENDED BY:
Charles M. Duggan Jr., City Manager
REVIEWED BY:
Janice McConnell, Assistant City Manager
Christopher Boatman, Assistant City Manager
Danielle Garcia, Management Services/Finance Director
PREPARED BY:
Tricia Munoz, Development Services Management Analyst
Fiscal Impact
Discussion:
There is no impact to the General Fund by approving this item.
Attachments
Attachment A - NOFA
Attachment B - FY2024-25 CDBG Funding Form
Attachment C - 2024-2025 Project Applications List
Redlands Regular Meeting of 02-06-24
440 of 857
NOTICE OF FUNDING AVAILABILITY (NOFA)
SAN BERNARDINO COUNTY
DEPARTMENT OF COMMUNITY DEVELOPMENT AND HOUSING (CDH)
CONSOLIDATED HUD COMMUNITY PLANNING AND DEVELOPMENT (CPD) GRANTS PROGRAM Program Year 2024-25
San Bernardino County is a direct recipient of federal community development and housing funds provided by the United States Department of Housing and Urban Development (HUD) and uses these funds to provide decent housing, suitable living environments, and expanded economic opportunities, principally for low- to moderate-income persons.
The C
ounty is seeking applications for Community Development Block Grant (CDBG) funding from applicants (Cities and Non-Profit Agencies) who are capable of providing eligible public service and/or capital improvement activities that will help the County meet the needs of its community and achieve the goals and objectives listed in the County’s Hud Five Year Consolidated Plan.
For
the 2024-25 Program Year, beginning July 1, 2024, it is anticipated that the County will receive approximately $ 2.7 million in CDBG funds to support eligible activities for the County’s CDBG Participating Cities. Eligible activities for CDBG funding must meet one of the following national objectives: 1) principally benefit low - to moderate-income persons, 2) eliminate slums and blight, and 3) meet an urgent need. These funds are available to service the following CDBG program Participating Cities: Adelanto, Barstow, Big Bear Lake, Colton, Grand Terrace, Highland, Loma Linda, Montclair, Needles, Redlands, Twentynine Palms, Yucaipa, Yucca Valley, and the surrounding communities . All interested applicants within these jurisdictions are encouraged to apply.
Examples of eligible activities include but are not limited to:
Public Service Activities (Capped at 15%) Capital Improvement Activities • Child Care Services
• Senior Services (e.g., daycare programs
or subsidized meal programs)
• Handicapped Services
• Health and Mental Health Services
• Services to Battered and Abused Spouses
• Legal Services
• Employment Training
• Food Banks
• Transportation Services
• Infrastructure Improvements (e.g., street
paving, sidewalk, curb and gutter, or
water/sewer lines)
• Neighborhood Facility Improvements (e.g., parks,
libraries, recreational facilities, community centers,
or senior centers)
• Special Needs Facilities (e.g., homeless, domestic
violence shelters, nursing homes, or group homes)
HOW T
O APPLY
CDBG funding applications will be released on Monday, November 6, 2023. To obtain instructions and guidelines for the application for CDBG funding, please refer to the Community Development and Housing website:
https://sbcountycdha.com/community-development-and-housing-department/nofas-notices-rfps/. The deadline for submitting applications is Monday, December 11, 2023, by or before 4:00 P.M.. Applications must be submitted through the online Web Application Management System (WAMS): https://sbc.hdsoftware.net/login. Any applications received after the deadline will not be accepted.
Should you have a question regarding the CDBG application process please contact Bryan Anderson, Supervising ECD Analyst by telephone at (909) 501-0625 or by email at [email protected]. Also, it is our intention to comply with the requirements of the Americans with Disabilities Act (ADA) in every way. Should you require assistance please contact Bryan Anderson at the telephone number or email listed above.
NOTE
The following cities are NOT part of the County‘s CDBG Participating Cities Program: Chino, Chino Hills, Fontana, Hesperia, Ontario, Rancho Cucamonga, Rialto, San Bernardino, Upland, Victorville, and the Town of Apple Valley. However, they are direct recipients of HUD federal funds. To apply for funding in these cities, you are encouraged to contact each city directly.
Attachment A
Redlands Regular Meeting of 02-06-24
441 of 857
City (1): City Council Hearing Date (2):
$ 334,141.00 Public Service Limit (15%) (4): $ 50,121.15 $3,683.53 Public Service
YIN
(8)
Applicant's
Requested Amount (9)
City's 2024-2025
Recommended
Allocation Amount
(10)
Available
Unprogrammed
Funds to Commit
to Activity
(11)
Public Service
Amount
(12)
Activity
Total
(13)
N $ 380,000.00 $ 284,019.85 $ 3,683.53 $ - 287,703.38$ Y $ 24,996.00 $ - $ - $ 7,500.00 -$
Y $ 20,000.00 $ - $ - $ 7,500.00 -$
Y $ 10,000.00 $ - $ - $ 7,500.00 -$
Y $ 5,364.00 $ - $ - $ 5,121.00 -$
Y $ 50,121.00 $ - $ - $ 7,500.00 -$
Y $ 25,000.00 $ - $ - $ 7,500.00 -$
Y $ 12,000.00 $ - $ - $ 7,500.00 -$
$ - $ - $ - $ - -$
$ - $ - $ - $ - -$
$ - $ - $ - $ - -$
Totals (14)
527,481$ 284,019.85$ $ 3,683.53 $ 50,121.00 287,703.38$ Public Service Calculation (15):
50,121.15$
Less Total Public Service
Activity Amount: $ 50,121.00 $ 0
-$
Signature Tricia Munoz, Management Analyst Date (18)
The City agrees to enter into a "General Fund Guarantee" in order for the County to recommend activity funding.
REDL24PS-041
COUNTY OF SAN BERNARDINO
Community Development and Housing Department
2024-2025 Community Development Block Grant (CDBG) Program Cooperating City Recommended Projects Form
CDH Application Log #
(6)
REDL24CN-017
Partners Against Violence
City's 2024-2025 Allocation (3):
Available Unprogrammed Funds From
Prior Years (5):
City of Redlands Tuesday, February 6, 2024
Project Title
(* indicates project requires a "General Fund Guarantee") (7)
Redlands Senior Center Kitchen Rehabilitation Project
Family Service Association of Redlands
Boys & Girls Clubs of Greater Redlands-Riverside
YMCA of the East Valley
Citrus Counseling Services
The Nowell Family Foundation, Inc.
REDL24PS-057
REDL24PS-004
REDL24PS-047
REDL24PS-056
REDL24PS-039
REDL24PS-030
The Blessings Center, Inc.
Remaining Balance of Unprogrammed Funds (16):
Public Service Limit:
Authorized City Representative (17):
General Fund Guarantee Certification (19)
For Third-Party capital improvement activities, the City understands that reimbursements received from the County for which no measurable outcome is achieved may subsequently be required to be repaid by the City (using non-federal funds) to County. Measurable outcomes are defined as providing benefits to low- to moderate-income individuals, families, organizations, and communities and are derived from the project or program.
Amount Available to Program to Public
Service Activities:
YES
Attachment B
Redlands Regular Meeting of 02-06-24
442 of 857
New/Cont. District Location Applicant Application # Project Title Project Description Amount Requested
Recommended
Award Comments Eligible: Yes/NO Supervising ECD
Analyst Initials Accomplishment #
Cont Third District Redlands
Tricia Munoz, Management Analyst
35 Cajon Street, Suite 20
Redlands, CA 92373
[email protected]
909-335-4755 ext. 9
REDL24CN-017 Redlands: Redlands Senior Center - Rehabilitation Project Funding For Construction Project - The Redlands Senior Community Center Rehabilitation Project will include, but not limited to the The proposed project includes the installation of energy-efficient kitchen appliances, a flooring overhaul, introduction of LED lighting, establishment of commercial kitchen- grade walls, and an upgrade to the HVAC system. This facility supports the City of Redlands Meals on Wheels and Senior Congregate Meals programs.
Approximately 27,000 seniors citizens will benefit from these improvements. $380,000.00 $284,020.00
Funding for Eligible Construction Project - The Redlands Senior Community Center Rehabilitation Project. Approximately 27,000 seniors citizens will benefit from these improvements. The Joslyn Senior Center is owned by the City. Compliance to the Davis-Bacon Federal Wage Rates and other related Acts including Section 3 may increase the cost of construction by as much as 20%.
Yes
Cont Third District Redlands
Kyra Stewart, Executive Director
612 Lawton Street
Redlands, CA 92374
[email protected]
9097932673
REDL24PS-004 Redlands: Housing and Food Program - FSA of Redlands Public Service - Family Service Association of Redlands will provide case management services, including food, personal supplies and rental assistance to keep families from losing their residence
$24,996.00 $7,500.00
Expanding Eligible Public Service - Family Service Association of Redlands, under contract with the City of Redlands, will provide case management services; emergency food and rental assistance to approximately 152 low-and moderate-income households through their outreach office in Redlands to City of Redlands and the surrounding area.
Public Services are limited to low-and moderate-income households and require monthly documentation that at least 51% of the households served qualify as low-and moderate-income. This activity was funded in previous years (less than 12 months) and is a continuing activity. Therefore, a quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding.
Yes
Cont Third District Redlands
Brandy A. Weber, Resource Development Manager
Boys & Girls Club of Greater Redlands - Riverside
1251 Clay St.
Redlands, CA, 92374
909-798-4599
REDL24PS-057 Redlands: Boys and Girls Club - Food Distribution Program Public Service - The City of Redlands will contract with Boys and Girls Club of Redlands-Riverside to provide a Family Strengthening Program that will include providing food to approximately 210 low-and-moderate-income households.
$20,000.00 $7,500.00
Eligible Public Service - Boys and Girls Club of Redlands-Riverside, under contract with the City of Redlands, will provide a Family Strengthening Program that will include providing food to approximately 210 low-and-moderate-income households in the City of Redlands and surrounding area.Public Services are limited to low-and moderate- income households and require monthly documentation that at least 51% of the households served qualify as low-and moderate-income. A quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding.
Yes
Cont Third District Redlands
Darwin Barnett, Chief Executive Officer
YMCA of the East Valley
500 E. Citrus Avenue
Redlands, CA 92373
[email protected]
909-798-9622 ext. 7107
REDL24PS-047 Redlands: YMCA of the East Valley - Legal Services Public Service - The YMCA of the East Valley, under contract with The City of Redlands, will provide legal services to approximately 600 low-and moderate- income households in the City of Redlands and surrounding area. $10,000.00 $7,500.00
Expanding Eligible Public Service - The YMCA of the East Valley, under contract with the City of Redlands, will provide legal services to approximately 600 low-and moderate- income households in the City of Redlands and surrounding area. Public Services are limited to low-and moderate-income households and require monthly documentation that at least 51% of the households served qualify as low-and moderate-income. This activity was funded in previous years (less than 12 months) and is a continuing activity.
Therefore, a quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding. This activity was funded in previous years (less than 12 months) and is a continuing activity.
Yes
New Third District Redlands
Roger Uminski, Chief Executive Officer
Citrus Counseling Services
101 E. Redlands Blvd. Ste. 215
Redlands, CA 92373
[email protected]
(909) 748-5416
REDL24PS-056 Redlands: Citrus Counseling Services - Mental Health Services Public Service - Citrus Counseling Services will provide mental health services to approximately 3 youth from homeless and/or low-and-moderate-income households.
$5,364.00 $5,121.00
Public Service - Citrus Counseling Services, under contract with the City of Redlands, will provide mental health services to approximately 3 youth from homeless and/or low- and-moderate-income households within the City of Redlands and surrounding area. Public Services are limited to low-and moderate-income persons and require monthly documentation that at least 51% of the persons served qualify as low-and moderate-income. Homeless Persons are a presumed 51% low-to moderate-income population.
However, documentation is still required. A quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding.
Yes
New Third District Redlands
Kellie Nowell, Chief Financial Officer
The Nowell Family Foundation, Inc.
5574 East Bayshore Walk
Long Beach, CA 90803
[email protected]
714-726-6103
REDL24PS-039 Redlands: Bradley’s House Project - Substance Abuse - Housing and Recovery Services Pubic Service - Bradley's House Project will temporarily house and provide recovery programs to approximately 50 homeless and low-to moderate income adult males who are affected by substance abuse. $50,121.00 $7,500.00
Eligible Pubic Service - Bradley's House Project, under contract with the City of Redlands, will temporarily house and provide recovery programs to approximately 50 homeless and low-to moderate income adult males who are affected by substance abuse within the City of Redlands and the surrounding area. Public Services are limited to low-and moderate-income persons and require monthly documentation that at least 51% of the persons served qualify as low-and moderate-income. A quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding.
Yes
Cont Third District Redlands
Michelle Cates, Executive Director
Partners Against Violence
444 N. Arrowhead Ave, Ste. 101
San Bernardino, CA 92401
[email protected]
909-885-8884
REDL24PS-030 Redlands: Supportive Services for Victims of Violence - Partners Against Violence Expanding Public Service - Partners Against Violence (PAV), under contract with the City of Redlands, will provide outreach and crisis intervention to approximately 105 victims of abuse and domestic violence within the City of Redlands and the surrounding area.
$25,000.00 $7,500.00
Expanding Eligible Public Service - Partners Against Violence (PAV), under contract with the City of Redlands, will provide crisis intervention and community prevention education services to approximately 105 persons who may be victims of abuse or domestic violence within the City of Redlands and the surrounding area. Public Services are limited to low-and moderate-income persons and require monthly documentation that at least 51% of the persons served qualify as low-and moderate-income. Battered and abused spouses are a presumed 51% low-to moderate-income population. However, documentation is still required. Also, a quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding. This activity was funded in previous years (less than 12 months) and is a continuing activity.
Yes
Cont Third District Redlands
Ariana Avila, Sr. Funding and Project Coordinator
The Blessing Center, Inc.
1255 W Colton Ave
Redlands, CA 92374
[email protected] 9095206834
REDL24PS-041 Redlands: Transitional Housing - The Blessing Center Public Service - The Blessing Center provides shelter and educational services to approximately 30 homeless, low-income, victims of domestic violence, and at-risk children in the City of Redlands and surrounding area. $12,000.00 $7,500.00
Expanding Eligible Public Service - This project is an eligible public service to assists persons who are homeless and low to moderate income, including women and children who are homeless. Sub-activities of this program include individual and group counseling, counseling for children, mentoring, case management, therapy sessions, parenting skills classes, after school on-line tutoring, on-site petting zoo, and on-site therapy gardening opportunities. Public Services are limited to low-and moderate-income persons and require monthly documentation that at least 51% of the persons served qualify as low-and moderate-income. Homeless Persons are a presumed 51% low-to moderate- income population. However, documentation is still required. Also, a quantifiable increase in the level of service or a new additional service is required in order to continue to be eligible for CDBG funding. This activity was funded in previous years (less than 12 months) and is a continuing activity.
Yes
Totals $527,481.00 $334,141.00
Attachment CEligible Applications
Redlands Regular Meeting of 02-06-24
443 of 857
New/Cont. District Location Applicant Application # Project Title Project Description Amount Requested Comments Eligible:
Yes/NO
New Third District Redlands
Mary Haddad, Chief Financial
Officer
St. Anthony Bridges to Home
1609 N. Mountain Avenue #304
Upland, CA 91784
[email protected]
909-437-3221
REDL24PS-016
Redlands: St.
Anthony Bridges to
Home - Welcome
Home Project
Not Eligible St. Anthony
Bridges, under contract
with the City of
Highland, will provide
furniture distribution for
personal use to
approximately 10 low-
and moderate-income
households in Highland
and the surrounding
areas.
$5,250.00
Not Eligible Public Service - St. Anthony Bridges to Home, under contract with the City of Redlands, will provide furniture distribution for personal use to approximately 78 low-and moderate-income households in Redlands and the surrounding areas.
24 CFR 570.207(b)(1)(iii) Furnishings and personal property. The purchase of equipment, fixtures, motor vehicles, furnishings, or other personal property not an integral structural fixture is generally ineligible.
NO
Attachment CIneligible Applications
Redlands Regular Meeting of 02-06-24
444 of 857
City Council Meeting K. 2.
DATE: 02/06/2024
TO: Honorable Mayor and City Council Members
SUBJECT: Consideration of a Public Work Contract with Matich Corporation for the Pavement Management Program (PMP) 2023 Street
Resurfacing Project for an amount not-to-exceed $4,381,606, approval of a $381,606 additional appropriation from the unassigned PARIS Fund balance, and determination that the Project is categorically exempt from environmental review pursuant to Section 15301 of the State's Guidelines for Implementing the California Environmental Quality Act (Municipal Utilities and Engineering Director Harris)
MOTION(S):
If City Council determines the staff recommendation is appropriate, the following motions are provided:
I move that the City Council determine approval of the contract and construction of the PMP 2023 Street Resurfacing Project is categorically exempt from environmental review in accordance with Section 15301 of the State’s guidelines implementing the California Environmental Quality Act; and
1. I move that the City Council approve the PMP 2023 Street Resurfacing Project Plans and Specifications, and award a Public Work Contract to Matich Corporation for an amount not-to-exceed $4,381,606; and
2. I move that the City Council approve a $381,606 additional appropriation from the PARIS Fund.
3. RECOMMENDATION:
Staff recommends City Council determine approval of a Public Works Contract and construction of the PMP 2023 Street Resurfacing Project is categorically exempt from environmental review in accordance with Section 15301 of the State’s guidelines implementing the California Environmental Quality Act. Staff Redlands Regular Meeting of 02-06-24
445 of 857
further recommends City Council approve the PMP 2023 Street Resurfacing Project Plans and Specifications, award a Public Works Contract to Matich Corporation for an amount not-to-exceed $4,381,606, and authorize an additional appropriation of $381,606 from the unassigned PARIS Fund balance.
DISCUSSION:
Upon completion of the Pavement Accelerated Repair Implementation Strategy (PARIS) program in December 2020, staff began developing a strategy to pave the remaining 1/3 of City streets, while performing the necessary preventative maintenance on the 2/3 of City streets that were previously rehabilitated. In July 2019, City Council approved an agreement with Bucknam Infrastructure Group, Inc. (Bucknam) to evaluate the condition of pavement throughout the City and update the PMP database. The condition of City street surfaces was evaluated and rated, and the projected life cycle for each was determined. The PMP 2020 identifies a schedule for maintenance and reconstruction of City streets at the appropriate time intervals in order to extend their overall life expectancy in the most efficient and economical manner. In addition, the PMP 2020 establishes a comprehensive process to prioritize the rehabilitation of the City’s street system and is a powerful tool to determine how best to utilize the City’s available financial resources.
The updated PMP 2020 includes a project forecasting strategy developed by Bucknam that follows the PMP maintenance and rehabilitation project budgets and addresses the specific needs of each street. Since completion of the PARIS program, the City has completed paving approximately eighty-seven (87) lane miles of streets. Staff utilized the PMP 2020 to prepare plans and specifications for the PMP 2023 Street Resurfacing Project (Project), which includes resurfacing approximately twenty-five (25) lane miles of streets, selective replacement of curb and gutter, and striping replacement. All known utility agencies operating within the City have been contacted to coordinate construction activities within the Project limits.
Staff prepared plans and specifications and advertised the Project on December 15, 2023. On January 4, 2024, the City Clerk’s office received and opened the following four (4) bids for the Project:
BID OPENING REPORT SUMMARY
Bidders Bid Amount
Matich Corporation, Highland, CA $4,381,606.00
R.J. Noble Company, Orange, CA $5,227,911.10
All American Asphalt, Corona, CA $5,460,390.00
Hillcrest Contracting, Corona, CA $5,816,561.69
Redlands Regular Meeting of 02-06-24
446 of 857
Each bid was reviewed by staff to determine responsiveness to bid requirements and Matich Corporation was determined to be the lowest responsive bidder.
Staff recommends awarding a Public Works Contract to Matich Corporation (Matich) for an amount not-to-exceed $4,381,606. The Fiscal Year 23/24 PARIS Project budget includes $4,000,000 for this project and approval of the Matich contract requires an additional appropriation of $381,606 from the PARIS Fund unassigned balance. The Project is scheduled for completed within one hundred ten (110) working days after the date of issuance of a Notice to Proceed to the Contractor.
This project is categorically exempt from environmental review in accordance with Section 15301 of the State's guidelines implementing the California Environmental Quality Act as the Project involves rehabilitation and maintenance of existing streets and there is no expansion to the existing use.
ALTERNATIVES:
City Council may deny the staff recommendation and provide alternate direction.
STRATEGIC PLAN:
Priority D:
Objective 3. Infrastructure - Engineer and construct transportation facilities to accommodate all potential users – motorists, cyclists and pedestrians.
SUBMITTED BY:
John R. Harris, Municipal Utilities and Engineering Director RECOMMENDED BY:
Charles M. Duggan Jr., City Manager
REVIEWED BY:
Yvette M. Abich Garcia, City Attorney
Janice McConnell, Assistant City Manager
Danielle Garcia, Management Services/Finance Director
Goutam K. Dobey, City Engineer
PREPARED BY:
Gerard Nepomuceno, Civil Engineer
Redlands Regular Meeting of 02-06-24
447 of 857
Fiscal Impact
Fiscal Year: FY 23/24
Appropriation Required Y/N: Yes
Amount: $381,606
Budgeted Y/N: Yes
Account No.: 211910
Discussion:
The FY 23/24 PARIS Project budget (211910) includes $4,000,000 for this project and approval of this Public Works Contract requires an additional appropriation of $381,606 from the projected unassigned balance for the PARIS Fund (211) as of June 30, 2024.
Attachments
A. Matich Public Work Contract
B. Bid Opening Report
C. Bid Analysis
D. Location Map
E. Additional Appropriation Form
F. PMP 2023 Project Plans
G. PMP 2023 Project Specifications
Redlands Regular Meeting of 02-06-24
448 of 857
1 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
PUBLIC WORK CONSTRUCTION CONTRACT
This Public Work Construction contract (“Contract”) is made and entered into this 6th day of February, 2024, by and between the City of Redlands, a municipal corporation, organized and existing under the laws of the State of California (hereinafter “City”), and Matich Corporation, a California corporation (hereinafter "Contractor"). City and Contractor are sometimes individually referred to herein as a “Party” and, together, as the “Parties.”
In consideration of the mutual promises contained herein, City and Contractor agree as follows:
1. SCOPE OF WORK: Contractor shall furnish all materials and will perform all of the work for the following: PMP 2023 Street Resurfacing Project, complete all items as required by the Contract Documents (as herein defined) and Specifications for City’s PMP 2023 Street Resurfacing Project, Project No. 211008 (the “Work”).
2. CONTRACT SUM: City shall pay Contractor the sum of four million three hundred eighty-one thousand six hundred six dollars ($4,381,606) as consideration for its performance of the Work in accordance with the terms and conditions set forth in the Contract Documents. Pursuant to Public Contract Code Section 22300, Contractor has the option to deposit securities with an escrow agent as a substitute for retention of earnings required to be withheld by City pursuant to an escrow agreement as set forth in Public Contract Code section 22300.
3. TIME FOR COMPLETION: The Work shall be completed within one hundred ten (110) working day(s) as defined in Section 1 -2 of the Standard Specifications for Public Works Construction “Greenbook” from and after the date of City’s issuance of a Notice to Proceed to Contractor.
4. LIQUIDATED DAMAGES: Contractor’s failure to complete the Work within the time allowed will result i n damages bein g sustained by City. Such damages are, and will continue to be, impracticable and extremely difficult to determine. Accordingly, Contractor shall pay to City, or have withheld from monies due to Contractor, the sum of one thousand dollars ($1000) for each working day as defined in Section 1-2 of the Standard Specifications for Public Works Construction “Greenbook” in excess of the specified time for completion of the Work. Execution of this Contract shall constitute agreement by City and Contractor that one thousand dollars ($1000) per day is the estimated damage to City caused by the failure of Contractor to complete the work within the allowed time. Such sum is liquidated damages and shall not be construed as a penalty, and may be deducted from payments due Contractor if such delay occurs.
5. CONTRACT DOCUMENTS: This Contract incorporates by reference the following: Notice Inviting Bids, Instructions to Bidders, Contractor’s Proposal, Bid Bond, Agreement, Performance Bond, Labor and Material Bond, Plans, General Conditions, Special Provisions and Specifications, and any addenda thereto (collectively, the “Contract Documents”).
6. ATTORNEYS' FEES: In the event any action is commenced to enforce or interpret the terms or conditions of this Contract, or the Contract Documents, the prevailing Party in such action, in addition to any costs and other relief, shall be entitled to recover its r easonable attorneys’ fees, including fees for use of in-house counsel by a Party.
Redlands Regular Meeting of 02-06-24
449 of 857
2 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
7. RESOLUTION OF CONSTRUCTION CLAIMS: Claims by Contractor in the amount of three hundred seventy five thousand dollars ($375,000) or less shall be made by Contractor and processed by the City pursuant to the provisions of Part 3, Chapter 1, Article 1.5 of the Public Contract Code (commencing with Section 201 04). All claims shall be in writing and include the documents necessary to substantiate the claim. Nothing in subdivision (a) of Public Contract Code Section 20104.2 shall extend the time limit or supersede the notice requirements provided in this case from filing claims by Contractor.
8. ELIGIBILITY OF CONTRACTOR/SUBCONTRACTOR: Contractor and all of its subcontractors shall abide by California Public Contract Code, Section 6109, and California Labor Code Sections 1777.1 and/or 1777.7, and certify that they are not debarred and are eligible to work on this project.
9. ASSIGNMENT OF AGREEMENT: No assignment by a Party of any rights or interests under this Contract shall be binding on another Party without the written consent of the Party sought to be bound.
10. SUCCESSORS AND ASSIGNS: City and Contractor each binds itself and their respective successors and assigns in respect to all covenants, agreements, and obliga tions contained in the Contract Documents.
11. SEVERABILITY: Any provision or part of the Co ntract Documents held to be void or unenforceable under any law or regulation shall be deemed stricken, and all remaining provisions shall continue to be valid and binding upon City and Contractor.
Redlands Regular Meeting of 02-06-24
450 of 857
3 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
IN WITNESS WHEREOF, the Parties hereto have executed this Contract the day and year first written above.
CITY OF REDLANDS
(SEAL)
By:____________________________________
Eddie Tejeda, Mayor
ATTEST:
____________________________________
Jeanne Donaldson, City Clerk
(SEAL)
Matich Corporation
Name of Contractor
By:_______________________________________
Signature of Authorized Agent
Jason G. Jones, Vice President
Title
__________________________________________
Signature of Authorized Agent (if necessary)
__________________________________________
Title
149783
Contractor's License No.
Redlands Regular Meeting of 02-06-24
451 of 857
4 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
WORKER'S COMPENSATION INSURANCE CERTIFICATION
Description of Contract: City of Redlands
Municipal Utilities and Engineering Department
PMP 2023 Street Resurfacing Project
Project No. 211008
Every employer, except the Sta te, shall secure the paymen t of compen sation in one or more of the following ways:
a. By being insured against liability to pay compensation by one or more insurers duly authorized to write compensation insurance in this State. b. By securing from the Director of Industrial Relations, a certificate of consent to self - insure, either as an individual employer, or as one employer in a group of employers, which may be given upon furnishing proof satisf actory to the Director of Industr ial Relations of ability to self-insure and to pay any comp ensation that may become due to his or her employees.
CHECK ONE
_____I am aware of the provisions of Section 3700 of the Labor Code which requires every employer to be insured against liability fo r Workers’ Compe nsation or to undertake self -insurance in accordance with the provisions of that Code, and I will comply with such provisions before commencing the performance of the work and activities required or permitted under this Agreement. (Labor Code §1861).
_____I affirm that at all times, in performing the work and activities required or permitted under this Agreement, I shall not employ any person in any manner such that I become subject to the workers’ compensation laws of California. However, at any time, if I employ any person such that I become subject to the workers’ compensation laws of California, immediately I shall provide the City with a certificate of consent to self-insure, or a certification of workers’ compensation insurance.
I certify under penalty of perjury under the laws of the Stat e of California that the information and representations made in this certificate are true and correct.
Dated this day of , 2024.
Matich Corporation _________________
(Contractor)
_____________________________________
(Signature)
Jason G. Jones, Vice President___________
(Official Title)
(SEAL)
(Labor Code Section 1861 provides that the above certificate must be signed and filed by the Contractor with the Owner prior to performing the work of the contract.)
Redlands Regular Meeting of 02-06-24
452 of 857
5 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
FAITHFUL PERFORMANCE BOND
Whereas, the City of Redlands (“City”), State of California, and Matich Corporation (hereinafter designated as "Principal") have entered into an agreement dated February 6, 2024 (“Agreement”) whereby Principal agrees to install and complete certain public improvements ( the “Work”), which said Agreement is identified as PMP 2023 Street Resurfacing Project, Project No. 211008 and is hereby referred to and made a part hereof; and
Whereas, said Principal is required under the terms of the Agreement to furnish a bond for the faithful performance of the Work, now, therefore, we, the Principal and , Liberty Mutual Insurance Company as Surety, are held and firmly bound unto the City in the penal sum of four million three hundred eighty-one thousand six hundred six dollars ($4,381,606) lawful money of the United States, for the payment of w hich sum we bind ourselves, and our heirs, successors, execu tors and administrators, jointly and severally, firmly by these presents.
The condition of this obligation is such that if the above bounded Principal, his or its heirs, executors, administrators, successors or assigns, shall in all things stand to and abide by, and well and truly keep and perform the covenants, conditions and provisions in the Agreement and any alteration thereof made as th erein provided, on his or its part, to be kept and perfor med at the time and in the manner therein specified, and in all respects according to their true intent and meaning, and shall faithfully ful fill the on e-year guarantee of all material s and workmanship, and shall defend, indemnify and save harmless the City and its elected officials, officers, age nts and employees, as therein stipulated, then this obligation shall become null and void; otherwise it shall be and remain in full force and effect.
As a part of the obligation secured hereby and in addition to the face amount specified therefor, there shall be included costs and reasonable expenses and fees, including reasonable attorneys’ fees, incurred by the City in successfully enforcing such obligations, all to be taxed as costs and included in the judgment rendered.
As a condition precedent to the satisfactory completion of the Work, the above obligation shall hold good for a period of one (1) year or longer if required by the Agreement after the acceptance of the work by the City, during which time if th e Principal shall fail to make full, complete, and satisfactory repair and replacements and totally protect the City from loss or damage made evident during this period from the date of completion of the Work, and resulting from or caused by defective materials or faulty workmanship, the above obligation in penal sum thereof shall remain in full force and effect. The obligations of Surety hereunder shall c ontinue so long as any obligat ion of the Principal remains.
Whenever the Principal shall be, and is declared by the City to be, in default under the Agreement, the City having performed the City obligations thereunder, the Surety shall prom ptly remedy the default, or shall promptly, at the City’s option:
1. Complete the Work in accordance with its terms and conditions; or
2. Obtain a bid or b ids for completing the Work in accordance with its terms and conditions, and upon determination by Surety of t he lowest responsive and respo nsible bidder, arrange for a contract between such bidder and the City, and make available as work progresses sufficient funds to pay the cost of completion of the Work less the balance of the Agreement price, Redlands Regular Meeting of 02-06-24
453 of 857
6 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
but not exceeding, including other costs and damages for which Surety may be liable hereunder, the amount set forth above. The term “balance of the Agreement pric e,” as used in this paragraph, shall mean the total amount payable to the Principal by the City under the Agreement and any modifications thereto, less the amount previously properly paid by the City to the Principal.
Surety expressly agrees that the City may reject any contractor or subcontractor which may be proposed by Surety in fulfillment of its obligations in the event of default by the Principal.
Surety shall not utilize the Principal in completing the Work nor shall Surety accept a bid from the Principal for completion of the Work if the City, when declaring the Principal in default, notifies Surety of the City’s objection to the Principal’s further participation in the completion of the Work.
No right of action shall accrue on the bond to or for the use of any person or corporation other than the City named herein or the successors or as signs of the City. Any suit under this bon d must be instituted within the applicable statute of limitations period.
The said Surety, for value received, hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the Agreem ent or to the work to be performed thereunder or the Specifications accompanying the same shall in any way affect its obligations on this bond, and it does hereby waive notice of any such change, extension of time, alteration or addition to the terms of the Agreement or to the work or to the specifications.
No final settlement between the City and the Principal shall abridge the right of any beneficiary hereunder whose claim may be unsatisfied.
The Principal and Surety agree that if the City is required to engage the services of any attorney in con nection with the enforcement of this bond, each shall pay the City’ s reasonable attorneys’ fees incurred, with or without suit, in addition to the above sum.
In witness whereof, this instrument has been duly executed by the Principal and Surety above named, on , 2024.
(SEAL) (SEAL)
(Contractor) (Surety)
BY:
(Signature) (Signature)
Address:___________________________________
__________________________________________
(Seal and Nota rial Acknowledg ment of
Surety)
Telephone ( )___________________________
Redlands Regular Meeting of 02-06-24
454 of 857
7 I:\cmo\Agreements\Matich Corporation Public Work Construction Contract FY23-0011.docx-ms
LABOR AND MATERIAL BOND
Whereas, the City Council of the City of Redlands, State of California, and Matich Corporation (hereinafter designa ted as “Principal”) have enter ed into an agreement (the “Agreement”) whereby Principal agrees to install and complete certain designated public improvements (the “Work”), which said agreement, dated February 6, 2024, and identified as PMP 2023 Street Resurfacing Project, Project No. 211008 is hereby referred to and made a part hereof; and
Whereas, under the terms of th e Agreement, Principal is required before commen cing the performance of the Work, to file a good and sufficient Labor and Material bond with the City of Redlands to secure the claims to which reference is made in Title 3 (commencing with Section 9550) of Part 6 of Division 4 of the Civil Code of the State of California.
Now, therefore, said Principal and the undersigned as corporate surety, are held firmly bound unto the City and all contractors, subcontractors, laborers, material men and other persons employed in the performance of the Agreement and referred to in the aforesaid Code of Civil Procedure in the sum of four million three hundred eighty -one thousand six h undred six dollars ($ 4,381,606) for materials furnishe d or labor thereon of any kind , or for amounts due under the Unemp loyment Insurance Act with respect to such work or labor, that said surety will pay the same in an amount not exceeding the amount hereinabove set forth, and also in case suit is brought upon this bond, will pay, in addition to the face amount thereof, costs and reasonable expenses and fees, including reasonable attorneys’ fees, incurred by the City in successfully enforcing such obligation, to be awarded and fixed by the court, and to be taxed as costs and to be included in the judgment therein rendered.
It is hereby expressly stipulated and agreed that this bond shall insure to the benefit of any and all persons, companies and corporations entitled to file claims under Title 3 (commencing w ith Section 9550) of Part 6 of Division 4 of the Civil Code, so as to give a right of action to them or their assigns in any suit brought upon this bond.
Should the condition of this bond be fully performed, then this obligation sh all become null and void, otherwise it shall be and remain in full force and effect.
The surety hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the Agreement or the specifications accompanying the same shall in any manner af fect it s obligations on this b ond, an d it does hereby waive notice of any such change, extension of time, alteration or addition.
In witness whereof, this instrument has been duly executed by the Principal and surety above named, on _______________________, 2024.
(SEAL) (SEAL)
(Contractor) (Surety)
BY:
(Signature) (Signature)
Address:_____________________________
(Seal and Notarial Acknowledgement of Surety) ____________________________________ Telephone: ( )___________________
Redlands Regular Meeting of 02-06-24
455 of 857
Redlands Regular Meeting of 02-06-24
456 of 857
PROJECT NO. 211008 BID DATE: 4-Jan-2024
PMP 2023 Street Resurfacing Project EST. START DATE: 6-Feb-2024 Unit Price Item Price Unit Price Item Price
1 Mobilization (Maximum 5% of total bid price) 1 LS $218,000.00 $218,000.00 $230,000.00 $230,000.00 2 SWPPP 1 LS $54,000.00 $54,000.00 $13,000.00 $13,000.00 3 Survey 1 LS $107,000.00 $107,000.00 $175,000.00 $175,000.00 4 Crack Seal/Fill and Slurry Seal (Type II) 112,840 SY $2.90 $327,236.00 $2.60 $293,384.00 5 0.1' AC Grind and 0.1' AC Overlay 54,358 SY $7.90 $429,428.20 $13.25 $720,243.50 6 Pulverize in place top 9" to place 2" AC (FDR-200) 92,934 SY $10.70 $994,393.80 $12.25 $1,138,441.50 7 Asphalt Concrete Paving 10,037 TON $85.00 $853,145.00 $117.00 $1,174,329.00 8 Leveling Course 700 TON $110.00 $77,000.00 $150.00 $105,000.00 9 R/R PCC Curb & Gutter 1,231 LF $68.00 $83,708.00 $93.00 $114,483.00 10 AC Dike/Berm (6-inch) 12,150 LF $7.10 $86,265.00 $8.00 $97,200.00 11 R/R PCC Gutter Pan 140 LF $56.00 $7,840.00 $67.00 $9,380.00 12 Construct X-Gutter w/ Spandrel 400 SF $33.00 $13,200.00 $41.00 $16,400.00 13 R/R Driveway Approach 801 SF $22.00 $17,622.00 $26.00 $20,826.00 14 Adjust Manhole w/ Concrete Collar 122 EA $1,500.00 $183,000.00 $1,250.00 $152,500.00 15 Adjust Valve Cover (Circular) 129 EA $98.00 $12,642.00 $150.00 $19,350.00 16 Replace Valve Can & Cover (Triangular) 30 EA $196.00 $5,880.00 $1,400.00 $42,000.00 17 Install Blue/yellow RPM 106 EA $8.00 $848.00 $15.00 $1,590.00 18 Replace Traffic Loops 14 EA $490.00 $6,860.00 $535.00 $7,490.00 19 STOP & Misc. Legend (Thermo) 170 EA $197.00 $33,490.00 $130.00 $22,100.00 20 24" Solid White/Yellow Stripe (Thermo) 297 LF $5.90 $1,752.30 $15.75 $4,677.75 21 12" Solid White/Yellow Stripe (Thermo) 3,451 LF $3.00 $10,353.00 $7.90 $27,262.90 22 8" Solid White Stripe (Thermo) 88 LF $0.96 $84.48 $2.00 $176.00 23 6" Double Yellow Stripe (Thermo) 19,784 LF $1.36 $26,906.24 $2.60 $51,438.40 24 6" Solid White Stripe (Thermo) 26,808 LF $0.71 $19,033.68 $1.10 $29,488.80 25 6" Skip White/Yellow Stripe (Thermo) 9,120 LF $0.71 $6,475.20 $0.40 $3,648.00 26 4" Solid White/Yellow Stripe (Thermo) 14,923 LF $0.66 $9,849.18 $0.75 $11,192.25 27 4" Skip White/Yellow Stripe (Thermo) 700 LF $0.66 $462.00 $0.30 $210.00 28 Green Bike Lane 34,186 SF $5.30 $181,185.80 $5.00 $170,930.00 29 Export Roadway Material 5,018 CY $47.00 $235,846.00 $65.00 $326,170.00 30 Unforeseen work not covered in all other bid items 1 LS $200,000.00 $200,000.00 $200,000.00 $200,000.00 31 Demobilization 1 LS $178,100.12 $178,100.12 $50,000.00 $50,000.00 Last Minute Additions/Deductions $0.00 $0.00
Total Bid Price
License Status
Sub's License Status
Bid Bond Company
Submitted Entire Bid Package
Submitted Sub's Qualification Statement
DIR Status
Error in Bid No
Yes Yes
Active Active
No
CITY OF REDLANDS
MUNICIPAL UTILITIES & ENGINEERING DEPARTMENT
BID ANALYSIS
Item
No.
R.J. Noble CompanyBid Item Quantity Unit Matich Corporation YesYes
Active
Active
Liberty Mutual Insurance
Active
Active
Western Surety Company
$5,227,911.10$4,381,606.00
Sheet 1 of 2
Redlands Regular Meeting of 02-06-24
457 of 857
PROJECT NO. 211008 BID DATE: 4-Jan-2024
PMP 2023 Street Resurfacing Project EST. START DATE: 6-Feb-2024 Unit Price Item Price Unit Price Item Price
1 Mobilization (Maximum 5% of total bid price) 1 LS $250,000.00 $250,000.00 $235,000.00 $235,000.00 2 SWPPP 1 LS $45,000.00 $45,000.00 $30,000.00 $30,000.00 3 Survey 1 LS $175,000.00 $175,000.00 $179,000.00 $179,000.00 4 Crack Seal/Fill and Slurry Seal (Type II) 112,840 SY $3.00 $338,520.00 $3.90 $440,076.00 5 0.1' AC Grind and 0.1' AC Overlay 54,358 SY $11.50 $625,117.00 $13.30 $722,961.40 6 Pulverize in place top 9" to place 2" AC (FDR-200) 92,934 SY $14.50 $1,347,543.00 $15.70 $1,459,063.80 7 Asphalt Concrete Paving 10,037 TON $123.00 $1,234,551.00 $119.00 $1,194,403.00 8 Leveling Course 700 TON $185.00 $129,500.00 $120.00 $84,000.00 9 R/R PCC Curb & Gutter 1,231 LF $135.00 $166,185.00 $49.00 $60,319.00 10 AC Dike/Berm (6-inch) 12,150 LF $12.00 $145,800.00 $8.00 $97,200.00 11 R/R PCC Gutter Pan 140 LF $110.00 $15,400.00 $63.00 $8,820.00 12 Construct X-Gutter w/ Spandrel 400 SF $70.00 $28,000.00 $98.00 $39,200.00 13 R/R Driveway Approach 801 SF $35.00 $28,035.00 $46.00 $36,846.00 14 Adjust Manhole w/ Concrete Collar 122 EA $1,325.00 $161,650.00 $1,580.00 $192,760.00 15 Adjust Valve Cover (Circular) 129 EA $345.00 $44,505.00 $1,050.00 $135,450.00 16 Replace Valve Can & Cover (Triangular) 30 EA $1,450.00 $43,500.00 $1,180.00 $35,400.00 17 Install Blue/yellow RPM 106 EA $15.00 $1,590.00 $8.40 $890.40 18 Replace Traffic Loops 14 EA $620.00 $8,680.00 $840.00 $11,760.00 19 STOP & Misc. Legend (Thermo) 170 EA $125.00 $21,250.00 $205.00 $34,850.00 20 24" Solid White/Yellow Stripe (Thermo) 297 LF $15.00 $4,455.00 $6.10 $1,811.70 21 12" Solid White/Yellow Stripe (Thermo) 3,451 LF $8.00 $27,608.00 $3.10 $10,698.10 22 8" Solid White Stripe (Thermo) 88 LF $2.00 $176.00 $1.00 $88.00 23 6" Double Yellow Stripe (Thermo) 19,784 LF $2.50 $49,460.00 $1.42 $28,093.28 24 6" Solid White Stripe (Thermo) 26,808 LF $1.25 $33,510.00 $0.73 $19,569.84 25 6" Skip White/Yellow Stripe (Thermo) 9,120 LF $0.40 $3,648.00 $0.74 $6,748.80 26 4" Solid White/Yellow Stripe (Thermo) 14,923 LF $1.00 $14,923.00 $0.68 $10,147.64 27 4" Skip White/Yellow Stripe (Thermo) 700 LF $0.50 $350.00 $0.68 $476.00 28 Green Bike Lane 34,186 SF $5.00 $170,930.00 $5.50 $188,023.00 29 Export Roadway Material 5,018 CY $28.00 $140,504.00 $67.00 $336,206.00 30 Unforeseen work not covered in all other bid items 1 LS $200,000.00 $200,000.00 $200,000.00 $200,000.00 31 Demobilization 1 LS $5,000.00 $5,000.00 $16,700.00 $16,700.00 Last Minute Additions/Deductions $0.00 $0.00
Total Bid Price
License Status
Sub's License Status
Bid Bond Company
Submitted Entire Bid Package
Submitted Sub's Qualification Statement
DIR Status
Error in Bid No No
Yes Yes
Active Active
Fidelity and Deposit Co. of Maryland Fidelity and Deposit Co. of Maryland Yes Yes
Active Active
Active Active
Hillcrest Contracting
$5,460,390.00 $5,816,561.96
CITY OF REDLANDS
MUNICIPAL UTILITIES & ENGINEERING DEPARTMENT
BID ANALYSIS
Item
No. Bid Item Quantity Unit All American Asphalt
Sheet 2 of 2
Redlands Regular Meeting of 02-06-24
458 of 857
PMP 2023 STREET RESURFACING PROJECT
LOCATION MAP .
W COLTON AVE
E LUGONIA AVE
W PIONEER AVE
N UNIVERSITY ST
ORANGE ST
ORANGE ST
5TH BLVD
E SUNSET DR
FORD
ST
W SUNSET DR
W REDLANDS BLVD
CAJON ST
N CENTER ST
E PALM AVE
BARTON RD
ALESSANDRO
RD
OPAL AVE
W REDLANDS BLVD
BEAUMONT AVE
W CRESCENT AVE
ALABAMA ST
SAN TIMOTEO CANYON RD
BARTON RD
W FERN AVE
EHIGHLANDAVE
N DEARBORN ST
E OLIVE AVE
JUDSON ST
W CYPRESS AVE
E HILTON AVE
MISSIONRD
BROOKSIDE AVE
W LUGONIA AVE
N CHURCH ST
W PALM AVE
TEXAS ST
NEVADA
ST
E CYPRESS AVE
S
W
ABASH
AVE
E SAN BERNARDINO AVE
E FERN AVE
5TH ST
5TH AVE
N 6TH ST
S DEARBORN ST
ELIZABETH ST
W OLIVE AVE
TERRACINA BLVD
N WABASH AVE
CALIFORNIA ST
N CHURCH ST
W LUGONIA AVE
GARDENST
W SAN BERNARDINO AVE
PALM AVE
S CENTER ST
W HIGHLAND AVE
E REDLANDS BLVD
TENNESSEE ST
BOULDER AVE
N WABASH AVE
ALABAMA ST
3RD BLVD
3RD ST
E COLTON AVE
E CITRUS AVE
NEVADA ST
E PIONEER AVE
PALMETTO AVE
MARIGOLD AVE
PMP 2023 PROJECT STREETS
Redlands Regular Meeting of 02-06-24
459 of 857
Redlands Regular Meeting of 02-06-24
460 of 857
210
10 10
10 PMP 2023 STREET RESURFACING PROJECT
CITY OF REDLANDS
CONSTRUCTION PLANS FOR
PROJECT No. 211008
VICINITY MAP
NTS NORTH
SHEET INDEX:
TITLE SHEET
2434-ST-01/12
MARIO SAUCEDO, COUNCIL MEMBER
CITY COUNCIL:
PAUL BARICH MAYOR PRO TEM
CITY STAFF:
CHARLES M. DUGGAN, JR., CITY MANAGER
JENNA GUZMAN-LOWERY, COUNCIL MEMBER
EDDIE TEJEDA, MAYOR
DENISE DAVIS, COUNCIL MEMBER
CITY CLERK:
JEANNE DONALDSON, CITY CLERK
BROOKSIDE AVE
OLIVE AVE
FERN AVE
PALM AVE
CYPRESS AVE
HIGHLAND AVE
HIGHLAND AVE
PALM AVE
CYPRESS AVE
OLIVE AVE
FERN AVE
CENTER ST
CENTER ST
CAJON ST
CAJON ST
REDLANDS BLVD
REDLANDS BLVD
REDLANDS BLVD
COLTON AVE
CHURCH ST
CHURCH ST
UNIVERSITY ST
JUDSON STJUDSON ST
DEARBORN ST
TEXAS ST
CITRUS AVECITRUS AVE
FORD ST
6TH ST
HIGH AVE
COLTON AVE
TEXAS ST
ORANGE ST
LUGONIA AVELUGONIA AVE
STATE ST
TERRACINA BLVD
SAN BERNARDINO AVESAN BERNARDINO AVE
PIONEER AVEPIONEER AVE
SUNSET DR
SUNSET DR
WABASH AVE
MARIPOSA DR
FORD ST
CALIFORNIA ST
NEVADA ST
ALABAMA ST
REDLANDS BLVD
PARK AVE
BARTON RD
ALABAMA ST ALABAMA ST
MOUNTAIN VIEW AVE
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
Redlands Regular Meeting of 02-06-24
461 of 857
PROJECT INDEX MAP
NTS
INDEX MAP
2434-ST-02/12
AREA 'A'
AREA 'B'
AREA 'C'
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
AREA 'D'
Redlands Regular Meeting of 02-06-24
462 of 857
STOP
AHEAD
SLOW
XING
SCHOOL
GENERAL NOTES (STRIPING & MARKINGS)
1. ALL STRIPING AND PAVEMENT MARKINGS SHALL BE IN CONFORMANCE WITH THE CURRENT
EDITION OF THE TRAFFIC MANUAL PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
2. ALL EXISTING SIGNING, STRIPING, AND PAVEMENT MARKINGS NOT SHOWN ON THE PLANS, IF
REMOVED/OBLITERATED, SHALL BE REPLACED/RESTORED OF SAME KIND, AND IN
CONFORMANCE WITH THE CURRENT EDITION OF THE TRAFFIC MANUAL PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
3. THE CONTRACTOR SHALL NOTIFY THE CITY ENGINEER TO SCHEDULE CITY PERSONNEL FOR A
FINAL INSPECTION AND APPROVAL OF TRAFFIC CONTROL DEVICES PRIOR TO PROJECT ACCEPTANCE.
4. ALL CONSTRUCTION SIGNS SHALL BE BLACK ON ORANGE BACKGROUND WITH HIGH INTENSITY (FHWA TYPE III) REFLECTIVE SHEETING.
5. ALL CONSTRUCTION SIGNING SHALL BE IN CONFORMANCE WITH THE CURRENT EDITION OF THE
MANUAL OF TRAFFIC CONTROLS FOR CONSTRUCTION AND MAINTENANCE WORK ZONES PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
6. THE CONTRACTOR SHALL INSTALL AND MAINTAIN ALL TRAFFIC CONTROL DEVICES AND NECESSARY TO MAINTAIN PUBLIC SAFETY. ALL WORK WITHIN 6-FEET OF THE SHOULDER WILL REQUIRE CLOSURE OF THE SHOULDER. ALL WORK WITHIN 6-FEET OF THE TRAVELED WAY WILL REQUIRE CLOSURE OF THAT LANE.
7. ALL WORK SHALL CONFORM TO THE "STANDARD SPECIFICATIONS FOR PUBLIC WORKS CONSTRUCTION (GREENBOOK)", 2021 EDITION, THE "STANDARD PLANS FOR PUBLIC WORKS CONSTRUCTION", 2021 EDITION, AND THE CITY OF REDLANDS STANDARD SPECIFICATIONS. ALL
WORK SHALL BE COMPLETED TO THE SATISFACTION OF THE MUNICIPAL UTILITIES & ENGINEERING DIRECTOR OR APPOINTED REPRESENTATIVE.
GENERAL NOTES (STREET)
1. ALL STRIPING AND PAVEMENT MARKINGS SHALL BE IN CONFORMANCE WITH THE CURRENT
EDITION OF THE TRAFFIC MANUAL, PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
2. ALL EXISTING SIGNING, STRIPING, AND PAVEMENT MARKINGS, IF REMOVED/OBLITERATED,
SHALL BE REPLACED/RESTORED OF SAME KIND, AND IN CONFORMANCE WITH THE CURRENT
EDITION OF THE TRAFFIC MANUAL, PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
3. THE CONTRACTOR SHALL NOTIFY THE CITY ENGINEER TO SCHEDULE CITY PERSONNEL FOR A
FINAL INSPECTION AND APPROVAL OF TRAFFIC CONTROL DEVICES PRIOR TO PROJECT ACCEPTANCE.
4. ALL CONSTRUCTION SIGNS SHALL BE BLACK ON ORANGE BACKGROUND WITH HIGH INTENSITY (FHWA TYPE III) REFLECTIVE SHEETING.
5. ALL CONSTRUCTION SIGNING SHALL BE IN CONFORMANCE WITH THE CURRENT EDITION OF THE MANUAL OF TRAFFIC CONTROLS FOR CONSTRUCTION AND MAINTENANCE WORK ZONES.
PUBLISHED BY THE STATE OF CALIFORNIA, DEPARTMENT OF TRANSPORTATION.
6. THE CONTRACTOR SHALL INSTALL AND MAINTAIN ALL TRAFFIC CONTROL DEVICES AS NECESSARY FOR PUBLIC SAFETY. ALL WORK WITHIN 6-FEET OF THE SHOULDER WILL REQUIRE CLOSURE OF THE SHOULDER. ALL WORK WITHIN 6-FEET OF THE TRAVELED WAY WILL REQUIRE CLOSURE OF THAT LANE.
7. ALL CONFLICTING SIGNS SHALL BE REMOVED OR RELOCATED BY THE CONTRACTOR.
RELOCATABLE SIGNS SHALL BE INSTALLED AS SPECIFIED ON THE PLANS OR AS DETERMINED IN THE FIELD BY THE CITY ENGINEER.
8. ALL WORK SHALL CONFORM TO THE "STANDARD SPECIFICATIONS FOR PUBLIC WORKS CONSTRUCTION (GREENBOOK)", 2018 EDITION, THE "STANDARD PLANS FOR PUBLIC WORKS CONSTRUCTION", 2012 EDITION, AND THE CITY OF REDLANDS STANDARD SPECIFICATIONS. ALL
WORK SHALL BE COMPLETED TO THE SATISFACTION OF THE MUNICIPAL UTILITIES & ENGINEERING DIRECTOR OR APPOINTED REPRESENTATIVE.
9. IF ANY DAMAGE OCCURS AS A RESULT OF THIS PROJECT, THE CONTRACTOR IS RESPONSIBLE TO REPAIR AT HIS EXPENSES.
10. EXISTING STRIPING SHALL BE REMOVED AND REPLACED AS NECESSARY. NEW STRIPING AND
PAVEMENT MARKINGS SHALL BE INSTALLED IN ACCORDANCE WITH THE STRIPING PLANS
APPROVED BY THE MUNICIPAL UTILITIES & ENGINEERING DIRECTOR OR APPOINTED REPRESENTATIVE.
11. SECTION 4216/4217 OF THE GOVERNMENT CODE REQUIRES A DIG ALERT IDENTIFICATION NUMBER BE ISSUED BEFORE THE "ENCROACHMENT PERMIT" WILL BE VALID. FOR YOUR DIG ALERT ID NUMBER, CALL UNDERGROUND SERVICE ALERT (TOLL FREE) AT 1-800-227-2600, TWO WORKING DAYS BEFORE YOU DIG.
12. PRIOR TO ROAD CONSTRUCTION, SURVEY MONUMENTS SHALL BE REFERENCED OUT AND CORNER RECORDS FILED WITH THE COUNTY SURVEYOR. SURVEY POINTS DESTROYED DURING
CONSTRUCTION SHALL BE RESET, AND A SECOND CORNER RECORD FILED FOR THOSE POINTS PRIOR TO COMPLETION AND ACCEPTANCE OF THE PROJECT.
13. USE BEST MANAGEMENT PRACTICES (BMP) TO PREVENT AND CONTAIN ANY ILLEGAL DISCHARGES IN ACCORDANCE WITH CHAPTER 13.54 OF THE MUNICIPAL CODE AND THE TERMS OF NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM (NPDES) PROGRAM. THIS IS TO
REMAIN IN EFFECT FOR THE ENTIRE DURATION OF PROJECT CONSTRUCTION TO ITS COMPLETION AND ACCEPTANCE BY CITY.
14. THE CONTRACTOR SHALL SUBMIT A TRAFFIC CONTROL/DETOUR PLAN TO THE ENGINEER FOR APPROVAL. ALL APPROVED CONSTRUCTION SIGNAGE SHALL BE IN PLACE PRIOR TO THE START OF WORK.
15. THE CONTRACTOR SHALL MAKE HIS OWN DETERMINATION OF QUANTITIES BEFORE SUBMITTING HIS BID. ANY ITEM OR WORK REQUIRED BY THESE PLANS WHICH IS NOT SPECIFICALLY LISTED IN THE ESTIMATE OF QUANTITIES SHALL BE CONSIDERED AS INCLUDED IN THE ITEMS OF WORK.
16. IT SHALL BE THE CONTRACTOR'S RESPONSIBILITY TO PROVIDE ACCURATE "RECORD" DRAWINGS TO THE CITY UPON COMPLETION OF CONSTRUCTION.
17. RESURFACING WORK WITHIN TEN FEET OF ANY RAILROAD X-ING, BRIDGE AND/OR SHALLOW (1-1/2' OR LESS COVER) UNDERGROUND STRUCTURES SHALL BE GRIND & OVERLAY OPERATION INSTEAD OF PULVERIZATION (IF SPECIFIED). THICKNESS OF AC LAYER SHALL BE AS SPECIFIED IN THE PLAN.
18. ALL DELINEATORS, SIGNS, TRAFFIC CONES SHALL BE IN NEW CONDITION.
19. ALL UTILITY LINES, INCLUDING IRRIGATION AND STORM DRAIN LINES SHOWN ARE APPROXIMATE AND INTENDED FOR REFERENCE ONLY. CONTRACTOR TO POTHOLE ALL EXISTING UTILITIES PRIOR TO CONSTRUCTION AND NOTIFY THE ENGINEER IMMEDIATELY IF CONFLICTS ARISE. NO
ADDITIONAL COMPENSATION WILL BE ALLOWED FOR UTILITY CONFLICTS IF NOT FIELD LOCATED PRIOR TO START OF CONSTRUCTION.
20. THE EXISTENCE AND APPROXIMATE LOCATIONS OF ANY UNDERGROUND UTILITIES OR
STRUCTURES SHOWN ON THESE PLANS ARE OBTAINED BY A SEARCH OF THE AVAILABLE RECORDS. THE CIVIL ENGINEER ASSUMES NO LIABILITY AS TO THE EXACT LOCATION OF SAID LINES NOR FOR UTILITY OR IRRIGATION LINES WHOSE LOCATIONS ARE NOT SHOWN. THE
CONTRACTOR SHALL BE RESPONSIBLE FOR NOTIFYING ALL UTILITY AND IRRIGATION
COMPANIES PRIOR TO WORK OR EXCAVATION TO DETERMINE THE EXACT LOCATIONS OF ALL
LINES AFFECTING THIS WORK, WHETHER OR NOT SHOWN HEREON, AND FOR ANY DAMAGE OR PROTECTION TO THESE PLANS.
SPECIAL NOTES
1. SEWER AND SD MANHOLE, WATER GATE VALVE BOX AND COVER IN THE SLURRY SEAL PORTION OF THE ROADWAY MAY NOT REQUIRE FIELD ADJUSTMENTS BUT MAY REQUIRE CLEAN UP.
2. APPROXIMATE LOCATION FOR DRIVEWAY APPROACH, X-GUTTER AND ADA RAMP ARE SHOWN ON PLAN. THE EXACT LOCATION WILL BE VERIFIED IN THE FIELD.
3. CONTRACTOR SHALL INCLUDE COMPENSATION FOR INSTALLATION AND RELOCATION OF INFORMATION SIGNS IN THE MOBILIZATION ITEM AS NECESSARY.
4. DURING PULVERIZATION IF MACADAM IS DISCOVERED IN THE ROAD, RESURFACING METHOD SHALL BE CHANGED TO GRIND & OVERLAY WITH THE APPROVAL OF CITY STAFF. PAYMENT
SHALL BE MADE PER BID UNIT COST OF THE METHOD CHANGED TO BUT NO ADDITIONAL
MONETARY COMPENSATION WILL BE ALLOWED FOR DELAY IN PAVING AND/OR PRODUCTION LOSS.
5. REPAIR AND REPLACE 2' OF AC GUTTER PAN ALONG EXISTING AC DIKE LOCATIONS.
NOTES AND DETAILS
2434-ST-03/12
TYPICAL STREET SECTION
SCALE: 1" = 5'
NOTE:
1. EXISTING CROSS SLOPE VARIES FROM 1% TO 10%. AS A RESULT, EVERY FDR-25/FDR-200 STREET REQUIRES EXPORT IN ORDER TO ACHIEVE 3% MAX. CROSS SLOPE.
2. CROSS SLOPE SHALL BE 2% MINIMUM AND SHALL NOT EXCEED 3%.
3. CROWN ELEVATION MUST BE AT LEAST 1.5" BELOW TOP OF CURB ELEVATION.
4. WHERE OFFSET CURB IS PRESENT, THE CROWN ELEVATION MUST BE AT LEAST 1.5" BELOW TOP OF CURB ELEVATION OF THE HIGHER SIDE OF THE STREET.
5. WHERE OFFSET CURB IS PRESENT, CROSS SLOPE OF THE HIGHER SIDE SHALL BE 1% MINIMUM.
6. ANY DEVIATION FROM THE ABOVE REQUIREMENTS SHALL BE APPROVED BY THE CITY STAFF.
7. STREET WITH NO CURB & GUTTER OR NO AC BERM, CONSTRUCT 2-FT SHOULDER AREA WITH EXCESSIVE ROADWAY MATERIAL
WHERE FEASIBLE AND MATCH EXISTING GRADE/SLOPE. 90%
COMPACTION SHALL BE ACHIEVED WITHIN SHOULDER AREA.
8. CONTRACTOR SHALL IDENTIFY THESE AREA WHERE TO BUILD
SHOULDER DURING CONSTRUCTION.
TYPICAL STRIPING AT INTERSECTION
NOT TO SCALE
STOP
WATER VALVE CAN DETAIL
SCALE: N.T.S.
1. SEWER INSTALLATION IS TO BE IN ACCORDANCE WITH THESE PLANS AND THE STANDARD
SPECIFICATIONS AND DETAIL DRAWINGS OF THE CITY OF REDLANDS LATEST REVISION THEREOF. IF ANY CONFLICTS ARISE SEE SECTION 2-5.2 OF THE GENERAL CONDITIONS.
2. ALL SEWER PIPE ELEVATIONS GIVEN REFER TO THE FLOWLINE INVERT ELEVATIONS.
3. PVC SEWER IS NOT PERMITTED ON ANY HORIZONTAL OR VERTICAL CURVE AND MUST BE LAID STRAIGHT BETWEEN STRUCTURES.
4. SEWER LATERALS SHALL BE CLEARLY MARKED WITH A 3-INCH TALL "S" CHISELED OR STAMPED IN THE CURB FACE.
5. REQUIRED SEPARATION OF THE WATER AND SEWER MAINS AND LATERALS SHALL BE STRICTLY ADHERED TO. INSTALLATION SHALL COMPLY WITH THE STATE DEPARTMENT OF HEALTH REGULATIONS AND THE DETAIL PROVIDED ON THIS SHEET.
6. SEWER LATERAL LOCATIONS SHALL NOT BE CHANGED MORE THAN 3 FEET (HORIZONTAL) WITHOUT AUTHORIZATION FROM THE CITY.
7. A MANDREL TEST SHALL BE PERFORMED BY THE CONTRACTOR IN THE PRESENCE OF THE CITY
INSPECTOR IN ACCORDANCE WITH THE CITY OF REDLANDS SANITARY SEWER SYSTEMS STANDARD SPECIFICATIONS. THE MANDREL, SHALL BE SUPPLIED BY THE CONTRACTOR, APPROVED BY THE CITY OF REDLANDS AND SHALL BE PULLED THROUGH THE PIPE BY HAND.
8. PRIOR TO PAVING OF STREETS OVER A NEW SEWER MAIN, ALL COMPACTION TESTS, AIR TESTS,
MANDREL TESTS SHALL BE COMPLETED AND APPROVED BY THE CITY AND A COMPLETE SET OF AS-BUILT DRAWINGS SUBMITTED TO THE MUNICIPAL UTILITIES AND ENGINEERING DEPARTMENT.
THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE PREPARATION OF THE AS-BUILT DRAWINGS.
9. MANHOLE RIM ELEVATIONS INDICATED HEREON ARE APPROXIMATE. THE CONTRACTOR SHALL
BE RESPONSIBLE FOR ADJUSTING ALL RIMS TO FINAL FINISH GRADE, IN COORDINATION WITH STREET IMPROVEMENTS.
10. CLEAN, HAUL, DISPOSE OF EXISTING PIPES, APPURTENANCES, MANHOLES PER SPECIFICATIONS. CONTRACTOR RESPONSIBLE FOR ALL APPLICABLE REGULATIONS AND WORKER SAFETY.
11. AFTER SEWER CONSTRUCTION IS SUBSTANTIALLY COMPLETE, BUT PRIOR TO FINAL APPROVAL,
CONTRACTOR SHALL PROVIDE AN INTERNAL DIGITAL VIDEO RECORDING OF THE ENTIRE PIPE REACHES INSTALLED IN ACCORDANCE WITH SECTION 500-1.1.5.
12. CONTRACTOR SHALL PROTECT ALL SURVEY MONUMENTS AND SHALL PAY ALL COSTS TO
RE-ESTABLISH ANY MONUMENTS DESTROYED OR DISTURBED DURING THE COURSE OF CONSTRUCTION. ALL WORK SHALL BE PERFORMED BY OR UNDER THE DIRECT SUPERVISION OF
A LICENSED PROFESSIONAL SURVEYOR IN THE STATE OF CALIFORNIA AND PER SPECIFICATIONS.
13. ALL STATIONING IS BASED ON THE CENTERLINE OF THE STREET, UNLESS OTHERWISE INDICATED.
14. THE PLANS WERE PREPARED USING DATA FROM THE CITY OF REDLANDS GIS DEPARTMENT, THEREFORE CENTERLINE AND PARCEL LINES ARE APPROXIMATE AND FOR REFERENCE ONLY.
THE CONTRACTOR SHALL ESTABLISH THE CENTERLINE OF ALL STREETS BY RECORD MAPS FOR ALL REQUIRED CONSTRUCTION STAKING. NO ADDITIONAL COMPENSATION WILL BE PROVIDED FOR ANY ADDITIONAL SURVEY RESEARCH OR INVESTIGATION TO COMPLETE STAKING.
15. IF SATURATED SOIL IS ENCOUNTERED DUE TO LEAKS IN THE EXISTING UTILITIES, THE
CONTRACTOR SHALL REMOVE SATURATED MATERIAL AND REPLACE WITH A SUITABLE BACKFILL
MATERIAL UNTIL ADEQUATE COMPACTION CAN BE ATTAINED BY VERIFICATION FROM THE CITY'S GEOTECHNICAL ENGINEER. PRIOR TO ANY REMOVAL OF SATURATED MATERIAL, CONTRACTOR SHALL DISCUSS THE METHODS OF REMEDIATION WITH THE CITY'S REPRESENTATIVE.
APPROVAL FROM THE CITY, OR THE CITY'S REPRESENTATIVE, SHALL BE OBTAINED FOR ANY
AMOUNT OF SATURATED MATERIAL REMOVAL IN WHICH THE CONTRACTOR ANTICIPATES TO BE COMPENSATED FOR. IF APPROVAL IS NOT OBTAINED, ALL COSTS SHALL BE BORNE BY THE CONTRACTOR. UP TO A 14 DAY DELAY IN THE PAVING OPERATIONS MAY BE REQUESTED AFTER
ALL LEAKS HAVE BEEN RESOLVED TO PROVIDE TIME FOR EXCESS MOISTURE TO DISSIPATE, AT NO ADDITIONAL COST TO THE CITY. BASE OR AN APPROVED BACKFILL MATERIAL SHALL BE
INSTALLED WITHIN THE TRENCH TO THE EXISTING PAVEMENT SURFACE AND MAINTAINED BY THE CONTRACTOR THROUGHOUT THE DURATION OF REQUESTED DELAY. A NO COST CHANGE
ORDER WILL BE PREPARED TO PROVIDE THE CONTRACTOR WITH ADDITIONAL CONTRACT TIME IF SUCH DELAY IS REQUESTED BY THE CITY.
16. BACKFILL UNDER ALL WATERLINES, IRRIGATION LINES OR STORM DRAINS CROSSING THE NEW PIPE TRENCH TO WITHIN ONE FOOT OF THE EXPOSED LINE. BACKFILL THE REMAINDER OF THE TRENCH BENEATH THE LINE AND TO ITS SPRINGLINE, OR 12 INCHES ABOVE THE INVERT FOR STORM DRAIN CHANNELS, WITH 1-1/2 SACK CONCRETE SLURRY.
17. ANY LATERALS INSTALLED INTO A TERMINUS MH SHALL BE INSTALLED PER DETAIL ON SHEET 12.
GENERAL NOTES (SEWER)
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
Redlands Regular Meeting of 02-06-24
463 of 857
QUANTITIES TABLE (2396-2452)
2434-ST-04/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
Redlands Regular Meeting of 02-06-24
464 of 857
QUANTITIES TABLE(2453-2508)
2434-ST-05/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
Redlands Regular Meeting of 02-06-24
465 of 857
QUANTITIES TABLE (2509-2540)
2434-ST-06/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
Redlands Regular Meeting of 02-06-24
466 of 857
VIDEO
DETECTORS
IN-PLACE
50'
STOP STOP
XING
SCHOOL
SLOW
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
XING
SCHOOL
SCHOOL
SLOW
SLOW
XING
SCHOOL
SLOW
XING
STOP
STOP
STOP
STOP
STOP STOP
STOP
STOPSTOP
STOP STOP
STOP
STOP
STOPSTOP
STOPSTOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP STOP
STOPSTOP
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-07/12
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
INDIANA CT
#2396
LUGONIA AVE
LUGONIA AVE
CLAY ST
#2413
LUGONIA AVE
LUGONIA AVE
CHURCH ST
#2414
CHURCH ST
#2415#2416
CHURCH ST
#2417
CHURCH ST
#2418
KIRBY CT
#2419
UNIVERSITY STUNIVERSITY STUNIVERSITY STUNIVERSITY ST
#2421#2422#2423
#2424
WASHINGTON STWASHINGTON STWASHINGTON ST
#2425#2426
#2427
HERALD STHERALD STHERALD ST
#2429 #2428
PENNSYLVANIA AVEPENNSYLVANIA AVE
SUN AVESUN AVESUN AVESUN AVESUN AVESUN AVE
#2404#2405
#2410#2411 #2409 #2408 #2407 #2406
SAN JUAN AVE
SAN MARCOS AVE
#2400
#2401
OXFORD DR
#2430
SAN BERNARDINO AVE
SAN BERNARDINO AVE
HARTZELL AVE
HARTZELL AVE
DOYLE AVE
DOYLE AVE
SAN BERNARDINO AVE
SAN BERNARDINO AVE FRONTIER AVE PIONEER AVE
PIONEER AVE
PENNSYLVANIA AVE
PENNSYLVANIA AVE LALANIA AVE
GREYSTONE AVE
KIMBERLY AVE SAN BERNARDINO AVE
SAN BERNARDINO AVE
COLTON AVE SUN AVE UNION AVE BROCKTON AVE
COLTON AVE SUN AVE UNION AVE BROCKTON AVE
COLTON AVE SUN AVE UNION AVE BROCKTON AVE
COLTON AVE SUN AVE UNION AVE BROCKTON AVE
BROCKTON AVE
BROCKTON AVE
LASSEN ST
DE ANZA ST
CHURCH ST CHURCH ST
WASHINGTON ST
ORANGE ST
ALTA ST
6TH ST
HERALD ST
TRIBUNE ST
POST ST
WASHINGTON ST
ORANGE ST
ALTA ST
6TH ST
HERALD ST
TRIBUNE ST
POST ST
ALTA ST
#2397
ALTA ST
#2398
ALTA ST
#2399
ORANGE ST ORANGE ST
PENNSYLVANIA AVE
#2402#2403
LASSEN ST
DELAWARE AVE
DOYLE AVE
DOYLE AVE
CLAY ST
#2412
PENNSYLVANIA AVE
PENNSYLVANIA AVE
#2420
Redlands Regular Meeting of 02-06-24
467 of 857
STOPSTOP
STOP
STOP
STOP
STOP
STOPSTOP
STOP
STOP STOP
STOP
STOP
STOP
STOP
STOP STOP
STOP
STOPSTOP
STOPSTOP
STOPSTOP
STOPSTOP
STOPSTOP
STOPSTOP
AHEADAHEAD
STOPSTOP
AHEADAHEAD
STOPSTOP
AHEADAHEAD
STOP
STOP
STOP
STOPSTOP
STOPSTOP
STOPSTOP
STOPSTOP
AHEADAHEAD
STOPSTOP
AHEADAHEAD
STOP
STOP STOP
STOP
SLOW
SCHOOL
XING
SLOW
SCHOOL
XING
STOP
SLOW
SCHOOL
XING
SCHOOL
STOP
STOP
STOP
STOP
AHEAD
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-08/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
CITRUS AVE
#2447#2448
#2449
CITRUS AVE
#2444#2445
CENTRAL AVE
#2446
INDEPENDENCE AVE
#2431
INDEPENDENCE AVE
CENTRAL AVE CENTRAL AVE
#2432#2433#2434#2435
CENTRAL AVE
#2250
PALM AVE
PALM AVE
#2456
#2457
LA PALOMA ST
#2458
ARDMORE AVE
ARDMORE AVE
CORONADO ST
#2454
BERMUDA ST
#2455
#2451
#2452
#2453
#2436
DEARBORN ST
#2437#2438
#2439
DEARBORN ST
#2440
HERRINGTON DR
#2441
#2442
RAINBOW LN
#2443
CITRUS AVE
BROCKTON AVE
BROCKTON AVE
CAMPUS AVECLOCK AVE
CAMBRIDGE AVE
WATERFORD AVE
COLTON AVE
COLTON AVE
DEARBORN STDEARBORN ST
JEFFERSON ST
ADAMS ST
WESTBROOK CIR
WILLOWCREEK DR
WABASH AVE WABASH AVE
GROVE STGROVE ST
KAYE CT
CRAIG CT
JUDSON STJUDSON ST
GROVE ST
JUDSON ST
LINCOLN ST
GROVE ST
JUDSON ST
LINCOLN ST
LINCOLN STLINCOLN ST
DEARBORN STDEARBORN ST
CHURCH STCHURCH ST
CITRUS AVE
CITRUS AVE
FORD STFORD ST
CORAL CT
CORAL CT
ROOSEVELT RD
ROOSEVELT RD
BERMUDA DR
CLARK ST
CLARK ST
FERN AVE
FERN AVE
HERRINGTON DR
LA SALLE ST
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
Redlands Regular Meeting of 02-06-24
468 of 857
STOP
11'
11'
STOP
STOP
STOP
STOP
STOP
STOP
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-09/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
JUNIPER CT
#2483
ROOSEVELT RD
ROOSEVELT RD
BERMUDA DR
LAUREL AVE
#2461 BELLA VISTA CT
#2460
DALE LN
#2464
LAUREL AVE
#2462
LAUREL AVE
#2473
HAMLIN PL
#2472
EVERGREEN CT
#2477
EVERGREEN CT
#2478
DALE LN
#2463
EVERRON CT
#2481
BERMUDA DR
#2480
CORONADO DR
#2479
ROMA ST
#2482
NORWOOD ST
#2484
PARKWOOD DR
#2486
DALE LN
#2465
CIMARRON CT
#2487
CIMARRON DR
#2488
OLIVE AVE
OLIVE AVE
OLIVE AVE
OLIVE AVE
PARKER CT
#2459
KANSAS STKANSAS ST
BROOKSIDE AVE
BROOKSIDE AVE
BROOKSIDE AVE
BROOKSIDE AVE
BROOKDALE DR
#2469
BROOKDALE DR
#2468
NANETTE ST
#2475
NANETTE ST
#2476
SAN JACINTO ST
#2474
ROOSEVELT RD
ROOSEVELT RD
EVERGREEN CT
EVERGREEN CT
BELLEVUE AVE
BELLEVUE AVE
BELLEVUE AVE
BELLEVUE AVE
ROBERTS ST
TERRACINA BLVD
ROBERTS ST
OLIVE AVE
GLENWOOD DR
GLENWOOD DR
#2466
#2467
#2470
#2471
CIMARRON DR
#2485
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
Redlands Regular Meeting of 02-06-24
469 of 857
12' 14'
75'
14'12'
STOP
STOP
STOP
STOP
STOP
STOP
AHEAD
STOP
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-10/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
CENTER ST
#2490
CAMELOT DR
#2492
CAMELOT DR
#2493
CAMELOT DR
#2494
MARVIN AVE
#2491
WIMBLETON DR
#2497
BUCKINGHAM DR
#2498
BUCKINGHAM DR
#2499
REBECCA CREST
#2489
CRESTVIEW RD
#2495
CRESTVIEW RD
#2496
MICHAEL CT
#2503
BUCKINGHAM DR
#2500
BUCKINGHAM DR
#2501
SOPHIA CT
#2502
SOPHIA CT
BUCKINGHAM DR
BUCKINGHAM DR
DEVONSHIRE DR
ALESSANDRO RD
RIDGE ST
CENTER ST
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
Redlands Regular Meeting of 02-06-24
470 of 857
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
AHEAD
STOP
STOP
STOP
STOP
STOP
STOP
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-11/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
VIA VISTA DR
#2504
ALTA LOMA DR
#2508
VALLEY VIEW DR#2510
VALLEY VIEW DR
#2509
COUNTRY CLUB DR
#2506
COUNTRY CLUB DR
#2507
VERDE VISTA DR
#2515
COUNTRY CLUB LN
#2516
FAIRWAY DR #2512
FAIRWAY DR
#2513
#2514
VINTON WAY
#2517
SUNSET DR
SUNSET DR
COUNTRY CLUB DR
COUNTRY CLUB DR
WABASH AVE
WABASH AVE
SUNSET DR
SUNSET DR
LA MIRADA DR
MARGARITA DRMARGARITA DR
SUNSET DR
SUNSET DR
#2505
#2511
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
Redlands Regular Meeting of 02-06-24
471 of 857
14'
14'
12'
12'
STOP
STOP
SEGMENTS LAYOUT
GRAPHIC SCALE
2434-ST-12/12
CITY OF REDLANDS
12 PROJECT NO. 211008
PMP 2023 STREET
RESURFACING PROJECT
SUNSET DR
SUNSET DR
EDGEMONT DR
EDGEMONT DR
SUNSET DR
SUNSET DR
EDGEMONT DR
#2520
EDGEMONT DR
#2520
FAIRMONT DR
#2519
FAIRMONT DR
#2519
MANZANITA RD
#2518
FAIRMONT DR
MATCHLINESEE BELOW LEFT
MATCHLINE
SEE ABOVE RIGHT
LEGEND
SEGMENT BOUNDARY (SHOWN WHERE
WATER VALVE COVER/BOX
MANHOLE RIM/COVER
REMOVE & REPLACE OR INSTALL PCC CURB & GUTTER
REMOVE & REPLACE OR INSTALL ROCK CURB & GUTTER
PAVEMENT RESURFACING IS CONTINUOUS)
REMOVE & REPLACE OR INSTALL AC DIKE/BERM
CRACK SEAL/FILL AND SLURRY SEAL TYPE II
PULVERIZE 9" & PLACE 2" AC OVER FDR-200
1-1/2" AC GRIND & 1-1/2" AC OVERLAY
BLUE RPM FOR FIRE HYDRANTS
EXISTING STORM DRAIN SYSTEM
Redlands Regular Meeting of 02-06-24
472 of 857
CITY OF REDLANDS
MUNICIPAL UTILITIES &
ENGINEERING DEPARTMENT
Bid Proposal, Contract Documents and Specifications
For
PMP 2023 STREET RESURFACING PROJECT
PROJECT No. 211008
DECEMBER 2023
Redlands Regular Meeting of 02-06-24
473 of 857
Redlands Regular Meeting of 02-06-24
474 of 857
CITY OF REDLANDS
MUNICIPAL UTILITIES & ENGINEERING DEPARTMENT
Bid Proposal, Contract Documents and Specifications
for
PMP 2023 STREET RESURFACING PROJECT
PROJECT No. 211008
For use in conjunction with specifications entitled: “Standard Specifications for Public Works Construction (Greenbook)” 2021 Edition; “Standard Plans for Public Works Construction” 20 21 Edition; Municipal Utilities and Engineering Department’s Water Systems Standard Specifications and Sanitary Sewer System Standard Specifications, latest editions; and General Permit Conditions and Trench Specifications.
City Council:
Eddie Tejeda, Mayor
Paul T. Barich, Mayor Pro Tem
Denise Davis, Councilmember
Jenna Guzman-Lowery, Councilmember
Mario Saucedo, Councilmember
City Clerk:
Jeanne Donaldson, City Clerk
City Staff:
Charles M. Duggan Jr., City Manager
DECEMBER 2023
Redlands Regular Meeting of 02-06-24
475 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
476 of 857
TOC 2
PMP 2023 STREET RESURFACING PROJECT
PROJECT No. 211008
TABLE OF CONTENTS
(XX) REFLECTS PAGE IDENTIFICATION FOOTER ABBREVIATION
NOTICE INVITING SEALED PROPOSALS (NIB)
BID DOCUMENTS (BD)
INSTRUCTIONS TO BIDDERS .......................................................................................... 1 PROPOSAL ...................................................................................................................... 10 BID CERTIFICATION ........................................................................................................ 15 BID BOND ...................................................................................................................... 16 NON-COLLUSION AFFIDAVIT ...................................................................................... 17 STATEMENT BY BIDDER ............................................................................................... 18 OFFICERS OF CORPORATION (Members of Firm) ....................................................... 18 SUB-CONTRACTORS LIST ............................................................................................. 19 QUALIFICATION AND EXPERIENCE STATEMENT .................................................. 20 GENERAL INFORMATION ............................................................................................. 21
CONTRACT DOCUMENTS (CD)
PUBLIC WORKS CONSTRUCTION CONTRACT ........................................................... 2
GENERAL CONDITIONS (GC)
SECTION 1 – GENERAL, TERMS, DEFINITIONS, ABBREVIATIONS, UNITS OF MEASURE, AND SYMBOLS ...................................................................... 1 SECTION 2 - SCOPE OF THE WORK ............................................................................... 2 SECTION 3 - CONTROL OF THE WORK ......................................................................... 3 SECTION 4 - CONTROL OF MATERIALS ....................................................................... 7 SECTION 5 – LEGAL RELATIONS AND RESPONSIBILITES ...................................... 8 SECTION 6 – PROSECUTION AND PROGRESS OF THE WORK .............................. 30 SECTION 7 - MEASUREMENT AND PAYMENT ......................................................... 32 SECTION 8 - FACILITIES FOR AGENCY PERSONNEL .............................................. 33 SECTION 9 - ASSIGNMENT OF UNFAIR BUSINESS PRACTICES CLAIMS ........... 33 SECTION 10 - TRENCHING AND EXCAVATION ........................................................ 33 SECTION 11 - REMOVAL, RELOCATION OR PROTECTION OF EXISTING UTILITIES ................................................................................................... 34 SECTION 200 - ROCK MATERIALS ............................................................................... 35 SECTION 201 - CONCRETE, MORTAR AND RELATED MATERIALS ..................... 36 SECTION 203 - BITUMINOUS MATERIALS ................................................................. 36 SECTION 206 - MISCELLANEOUS METAL ITEMS ..................................................... 37 Redlands Regular Meeting of 02-06-24
477 of 857
TOC 3
SECTION 207 – GRAVITY PIPE ...................................................................................... 38 SECTION 211 - MATERIAL TESTS ................................................................................ 38 SECTION 214 - TRAFFIC STRIPING, CURB AND PAVEMENT MARKINGS, AND PAVEMENT MARKERS ........................................................................... 38 SECTION 300 - EARTHWORK ........................................................................................ 39 SECTION 301 - TREATED SOIL, SUBGRADE PREPARATION AND PLACEMENT OF BASE MATERIALS ............................................................................. 43 SECTION 302 - ROADWAY SURFACING ..................................................................... 48 SECTION 303 - CONCRETE AND MASONRY CONSTRUCTION .............................. 58 SECTION 304 - METAL FABRICATION AND CONSTRUCTION .............................. 62 SECTION 314 - TRAFFIC STRIPING, CURB AND PAVEMENT MARKINGS, AND PAVEMENT MARKERS ........................................................................... 62
GENERAL REQUIREMENTS
SECTION 01110 COORDINATION OF WORK
SECTION 01112 DESCRIPTION OF WORK
SECTION 01200 MEASUREMENT AND PAYMENT
SECTION 01251 CHANGE ORDER REQUESTS
SECTION 01254 CHANGE ORDERS
SECTION 01298 SCHEDULE OF VALUES
SECTION 01321 CONSTRUCTION SCHEDULE
SECTION 01322 CONSTRUCTION PROGRESS PHOTOGRAPHY
SECTION 01323 CONSTRUCTION STATUS REPORTS
SECTION 01330 SUBMITTALS
SECTION 01571 STORMWATER POLLUTION PREVENTION PLAN
SECTION 01581 CONSTRUCTION INFORMATION SIGNS
SECTION 01721 MOBILIZATION
SECTION 01722 SURVEYING
SECTION 01732 POTHOLING
SECTION 01740 DEMOBILIZATION
TECHNICAL SPECIFICATIONS
SECTION 02222 PROTECTING EXISTING UNDERGROUND UTILITIES
STREETBOND CL STREETBONDCL COATING APPLICATION TO NON-TEXTURED
ASPHALT PAVEMENT SPECIFICATION
APPENDIX
APPENDIX A CHECKLIST OF LABOR LAW REQUIREMENTS
APPENDIX B CITY OF REDLANDS WORKDAY CONSTRUCTION SCHEDULE Redlands Regular Meeting of 02-06-24
478 of 857
TOC 4
APPENDIX C STANDARD DRAWINGS
APPENDIX D PERMITS
APPENDIX E TRASH COLLECTION SCHEDULE
APPENDIX F SCHOOL CALENDAR
APPENDIX G CITY OF REDLANDS CONTRACTOR SAFETY PROGRAM
Redlands Regular Meeting of 02-06-24
479 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
480 of 857
Redlands Regular Meeting of 02-06-24
481 of 857
Redlands Regular Meeting of 02-06-24
482 of 857
BID DOCUMENTS
(BD)
Redlands Regular Meeting of 02-06-24
483 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
484 of 857
BD 1
INSTRUCTIONS TO BIDDERS
For
PMP 2023 STREET RESURFACING PROJECT
PROJECT No. 211008
Bids to receive consideration shall be made in accordance with the following instructions:
1. PROPOSALS:
a. Bids shall be made upon the form of proposal furnished by the City. All Bids shall be properly executed with all items filled in; the signatures of all persons signing shall be in longhand. If the unit price and the total amount named by a Bidder for any item are not in agreement, the unit price shall be considered as representing the Bidder's intention, and the totals may be corrected by the Engineer to conform thereto. If the sum of the individual bid item’s and the total amount named by a Bidder are not in agreement, the sum of the bid item’s shall be considered as representing the Bidder’s intention, and the totals may be corrected by the Engineer to conform thereto. If the total price written in words and the total price written in figures are not in agreement, then the total price written in words will be considered as representing the Bidder’s intention, and the totals will be corrected by the Engineer to conform thereto.
b. Proposals may be rejected if they show any alterations of form, additions not called for, conditional or alternative bids, incomplete Bids, erasures, or irregularities of any kind.
Mistakes shall be lined through and the correct amount written above and initialed by the authorized agent of the Bidder.
c. Bids shall be accompanied by a cashier's or a certified check or Bidder's admitted corporate surety bond, in an amount not less tha n ten percent (10%) of the bid, made payable to the City of Redlands. Said check or bond shall be given as a guarantee that the Bidder will enter into a contract if awarded the work. In the case of refusal or failure to enter into said Contract, within fourteen (14) days after Notice of Award by the City in writing, the security shall be applied by the City to the differen ce between such bid and next lowest acceptable bid and surplus, if any, shall be returned to Bidder if cash or check is used, or to Surety if bid bond is used.
d. Before submitting a bid, Bidders shall carefully examine the Plans; read the Specifications; read all other Contract documents; shall visit the site of the work; shall fully inform themselves as to all existing conditions and limitations; and include in the bid a sum to cover the cost of all items included in the Contract. No allowance will be made due to lack of examination or knowledge. The submission of a bid shall be conclusive evidence that the bidder has investigated and is satisfied as to the conditions to be encountered as to character, quality and scope of work to be performed; the quantities of materials to be furnished; and as to the requirements of the Bid Proposal, plans and specifications.
Redlands Regular Meeting of 02-06-24
485 of 857
BD 2
e. Pursuant to CA Labor Code Section 1770 et seq., the successful bidder shall pay not less than the prevailing rate of per diem wages as determined by the Director of the California Department of Industrial Relations. Copies of such prevailing rate of per diem wages are available at http://www.dir.ca.gov/OPRL/PWD/. Copies of the prevailing wage determination are also on file at the City of Redlands and shall be made available to any interested party upon request.
f. The bid must be submitted on or before the date and time specified in the Notice Inviting Sealed Proposals (Bids). The bid shall be submitted in a sealed envelope marked in the lower left corner as follows:
BID FOR: PMP 2023 STREET RESURFACING
PROJECT, PROJECT No. 211008
g. Bids will be opened and publicly read aloud at the time set in the Notice Inviting Sealed Proposals (Bids), in the Office of the City Clerk, Civic Center, 35 Cajon Street, Suite 4, Redlands, California.
2. AGREEMENT AND BONDS:
The form of Contract which the successful Bidder, as Contractor, will be required to execute is included in the Contract Documents (CD) of these specifications and should be carefully examined by the Bidder. The Agreement, admitted Corporate Surety Bonds and other documents to be executed by the Contractor shall be executed in original-duplicates stamped according to law, one of which original -duplicates shall be filed with the City Clerk of the City of Redlands. The successful Bidder, simultaneously wit h the execution of the Agreement, will be required to furnish a faithful performance bond and a labor and material bond, each in an amount equal to one hundred percent (100%) of the Contract price. Said bonds shall provide that if the Contractor or their Subcontractor fails to pay for any materials, provision, provender or other supplies or items used in, upon, for or about the performance of the work contracted to be done, or for any work of labor thereon of any kind, or for amounts due under the Unemploy ment Insurance Act or Workman's Compensation, with respect to such work or labor, that the surety or sureties will pay for the same. The amount shall not exceed the sum specified in the bond, and also, in case suit is brought upon the bond, a reasonable attorney's fee to be fixed by the court. All bonds shall be secured from surety companies satisfactory to the City of Redlands and whose name is on file with the County Clerk of San Bernardino County, as an approved and financially sound surety company authorized to transact business in this state.
3. WITHDRAWAL OF BIDS:
a. Any Bidder may withdraw his Bid, only by written request, at any time prior to the scheduled time for Bid Opening.
b. No Bidder may withdraw his Bid for a period of sixty (60) days after the time of Bid Opening except as allowed by the California Public Contract Code.
Redlands Regular Meeting of 02-06-24
486 of 857
BD 3
4. INSURANCE AND HOLD HARMLESS REQUIREMENTS:
Before entering into a Contract, the Bidder to whom the Contract has been awarded shall furnish satisfactory evidence that they have secured all required insurance from a responsible insurance company authorized to do business in California and satisfactory to the City, and such insurance shall be maintained in full force and effect at the Contractor's own expense during the life of the Contract. Contractor shall furnish the City with the customary Certificates of Insurance for all required insurance listed below. General Liability Insurance shall name the City and the Consultant, as an additional insured and shall be primary and non-contributing to any insurance or self -insurance maintained by the City. All liability insurance policies shall bear an endorsement or shall have attached a rider whereby it is provided that, in the event of expiration or proposed cancellation of such policies for any reason whatsoever, the City shall be notified by registered mail, return receipt requested, giving sufficient time before the date thereof to comply with any applicable law or statute, but in no event less than forty five (45) days before expiration or cancellation is effective.
The coverage shall provide the following minimum limits based on the type of work proposed under this Contract. The Contractor shall determine if the proposed work requires Tier 1 or Tier 2 Insurance Requirements as follows:
CONTRACTED OPERATIONS DESIGNATED AS TIER 1
Air Conditioning (HVAC)
Systems (installation)
Electric Light or Power Line
Construction Pipeline Construction
Airport Runways (paving,
repaving, etc.) Elevator Work Roofing
Blasting Operations Excavation Sandblasting
Bridge or Elevated Highway
Construction
Fire Suppression Systems
(installation)
Sewer and Water Main
Construction
Buildings Structural Work
(including elevators)
Gas Mains or Connections
Construction Sign Erection (streets)
Building Structure (raising or
moving) Geophysical Exploration Solar Energy
Cable Installation in Conduits
and Conduit Construction
(streets)
Grading of Land Street Cleaning
Caisson or Cofferdam Work Hazardous Materials
Contractors Street or Road Construction
Dam or Reservoir Construction Irrigation or Drainage
Construction
Tank Construction, Installation,
Erection or Repair
Demolition (structures) Landscape Construction (street
or street medians)
Telephone or Cable Line
Construction
Drilling Painting (exterior greater than
single story)
Tree Pruning, Dusting,
Spraying or Removal
Redlands Regular Meeting of 02-06-24
487 of 857
BD 4
TIER 1 DESIGNATED INSURANCE REQUIREMENTS
a. Commercial General Liability
➢ $1 Million Per Occurrence/ $2 Million Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
▪ If scope of work is within 50 feet of any railroad, endorsement citing inclusion of liability associated with this work is required
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
b. Business Auto Liability
➢ $1 Million Combined Single Limit
▪ City listed as an Additional Insured on the coverage
▪ Must include liability arising from all owned, leased, hired, and non-owned autos ▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission ➢ If Contractor or its subcontractors or suppliers haul hazardous material (including, without limitation, waste), Auto Liability insurance must be applicable to all hazardous waste hauling vehicles, and include MCS 90 and CA9948 Endorsements.
c. Commercial Umbrella/ Excess Liability
➢ $5 Million Per Occurrence/ Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
d. Workers Compensation
➢ $1 Million Per Occurrence for Bodily Injury by Accident ➢ $1 Million Each Employee for Bodily Injury by Disease ➢ $1 Million Policy Limit for Bodily Injury by Accident ▪ Waiver of Subrogation in favor of City
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
e. Pollution Policy (Hazardous Materials) [If Applicable] ➢ Required of Projects that involve Demolition and/or Excavation Activities ➢ $1 Million Per Occurrence/ $2 Million Aggregate
➢ City listed as an Additional Insured on the coverage
Redlands Regular Meeting of 02-06-24
488 of 857
BD 5
TIER 2 DESIGNATED INSURANCE REQUIREMENTS
a. Commercial General Liability
➢ $1 Million Per Occurrence/ $2 Million Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
▪ If scope of work is within 50 feet of any railroad, endorsement citing inclusion of liability associated with this work is required
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
b. Business Auto Liability
➢ $1 Million Combined Single Limit
▪ City listed as an Additional Insured on the coverage
▪ Must include liability arising from all owned, leased, hired, and non-owned autos ▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission ➢ If Contractor or its subcontractors or suppliers haul hazardous material (including, without limitation, waste), Auto Liability insurance must be applicable to all hazardous waste hauling vehicles, and include MCS 90 and CA9948 Endorsements.
c. Workers Compensation
➢ $1 Million Per Occurrence for Bodily Injury by Accident ➢ $1 Million Each Employee for Bodily Injury by Disease ➢ $1 Million Policy Limit for Bodily Injury by Accident ▪ Waiver of Subrogation in favor of City
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
d. Pollution Policy (Hazardous Materials) [If Applicable] ➢ Required of Projects that involve Demolition and/or Excavation Activities ➢ $1 Million Per Occurrence/ $2 Million Aggregate
➢ City listed as an Additional Insured on the coverage
CONTRACTED OPERATIONS DESIGNATED AS TIER 2
Air Conditioning (HVAC)
Systems (service and repair) Carpentry (building interiors) Fire Suppression Systems (service and repair)
Alarms and Alarm Systems Communications Equipment
Installation (interior) Landscape Construction
Building Interior Work (service,
repair and non-structural
remodeling)
Driveway, Parking Area or
Sidewalk (paving or repaving) Painting (exterior)
Cable Installation in Conduits
(buildings) Fence Erection All Other Job Types including Vendors
Redlands Regular Meeting of 02-06-24
489 of 857
BD 6
Contractor expressly waives all rights to subrogation against the City, its officers, employees and volunteers for losses arising from work performed by Contractor for City by expressly waiving Contractor’s immunity for injuries to Contractor’s employees and agrees that the obligation to indemnify, defend and hold harmless provided for in this Agreement extend to any claim brought by or on behalf of any employee of Contractor. This waiver is mutually negotiated by the parties. This shall not apply to any damage resulting from the sole negligence of City, its agents and employees. To the extent any of the damages referenced herein were caused by or resulted from the concurrent negligence of City, its agents or employees, the obligations provided herein to indemnify, defend and hold harmless are valid and enforceable only to the extent of the negligence of contractor, its officers, agents and employees.
Subcontractors. The prime contractor shall include all subcontractors as insureds under its policies or shall furnish separate certificates and endorsements from each subcontractor.
The Contractor shall not assign or sublet the contract, in whole or in part, without the written consent of the City, nor shall the contractor assign any monies due to, or to become due to, Contractor hereunder without prior written consent of the City.
The Contractor shall be fully responsible to the City for the acts and omissions of the subcontractor and persons either directly or indirectly employed by the Contractor. Consent to subcontracting part of the work shall, in no way, release the Contractor from responsibility for performance of the work, and Contractor will be held, in all respects, accountable for the same as if no consent had been given. The Contractor shall give personal attention to this work which is sublet. Nothing contained in the contract documents shall create any contractual relation between any subcontractor and the City.
Hold Harmless and Indemnification. Contractor shall indemnify, hold harmless and defend City and its elected officials, agents and employees and the Consultant from and against any and all claims, losses or liability, including attorney’s fees, arising from injury or death to persons or damage to property occasioned by any act, omission or failure to act of Contractor, its subcontractors, and any officers, agents and employees in performing the work required by this Agreement. Contractor’s obligations under this provision shall not be limited in any way by any terms of this Agreement, or the insurance limits.
5. LICENSES AND PERMITS:
No bid will be accepted from a Contractor who is not licensed in accordance with the law under the provisions of Division III, Chapter 9 of the Business and Professions Code of the State of California.
The Contractor shall, at the time of bid opening, possess a valid "Class A" Contractor's license, and provide its California State Contractor’s License number to the City.
All subcontractors listed at the time of bid opening shall possess a valid Contractor’s license for the work in which they are specified to complete within the Bid Submittal Package.
Redlands Regular Meeting of 02-06-24
490 of 857
BD 7
The Contractor shall, prior to Notice to Proceed, procure all other permits and licenses as stipulated in the GENERAL CONDITIONS.
In addition, no contractor or subcontractor may be listed on a bid proposal for a public works project (submitted on or after March 1, 2015 or awarded on or after April 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5.
Contractors shall submit proof of registration status with their bid submission to the City of Redlands. This project is subject to compliance monitoring and enforcement by the Department of Industrial Relations.
6. SUBSTITUTION OF SECURITIES:
In accordance with applicable provisions of State law, the Contractor will be permitted to substitute qualified securities in lieu of retention of withheld progress payments by the Owner.
7. SUBCONTRACTORS:
Pursuant to Section 4105 of the C alifornia Public Contract Code, t he bidder may not circumvent the requirement to list subcontractors by the device of listing one subcontractor, who in turn sublets portions constituting a majority of the work covered by the contract.
A. Pursuant to California Government Code section 4106, subcontractors who will perform work or labor or render services in an amount in excess of one-half of one percent of the Contractor’s total bid shall be set forth in a list of subcontractors within the bid documents. Such list shall be accompanied by an experienced statement with pertinent information regarding similar projects and other evidence of qualifications for each such subcontractor, supplier, individual, or entity if requested by City. If City or engineer, after doing an investigation, has reasonable objection to any proposed subcontractor, supplier, individual, or entity, City may, before the notice of award is given, request the apparent successful bidder to submit a substitute, without an increase in the bid.
B. If the apparent successful bidder declines to make any such substitution, City may award the contract to the next lowest bidder that proposes to use acceptable subcontractors, suppliers, individuals, or entities declining to make the request and substitutions will not constitute grounds for forfeiture of the bid security of any bidder. Any subcontractor, supplier, individual or entity so listed and against which City makes no written objection prior to the giving of the notice of award will be deemed acceptable by City subject to verification of such assessments after the effective date of the agreement as provided herein.
8. NON DEBARRED CONTRACTORS AND SUBCONTRACTORS
The Contractor and all of its subcontractors shall, at the time of bid opening and for performance of this public works contract, be non-debarred contractors and not be ineligible Contractors pursuant to Public Contract Code section 6109 and Labor Code sections 1777.1 and 1777.7.
Redlands Regular Meeting of 02-06-24
491 of 857
BD 8
9. LABOR LAW REQUIREMENTS
Prior to the start of construction, the Contractor and each subcontractor shall submit to the City an executed Checklist of Labor Law Requirements, included within Appendix A, certifying that each Contractor and Subcontractor will comply with the foregoing Labor Law requirements; and fully understands that failure to comply with these requirements will subject it to the penalties cited herein.
By submitting a bid, the prime contractor and subcontractors involved in this project assure that they intend to comply with the labor law requirements noted within Appendix A, fully understanding that failure to comply may subject them to penalties as noted.
10. BID PROTEST PROCEDURES
Any bid protest must be in writing and received by the City Clerk’s Office at 35 Cajon Street, Suite 4, Redlands, CA 92373, before 5:00 p.m. no later than two working days following the bid opening (the “Bid Protest Deadline”) and must comply with the following requirements:
10.1 General. Only a bidder who has actually submitted a Bid Proposal is eligible to submit a bid protest against another bidder. Subcontractors are not eligible to submit bid protests. A bidder may not rely on the bid protest submitted by another bidder, but must timely pursue its own protest. If required by City, the protesting bidder must submit a non- refundable fee in the amount specified by City, based upon City’s reasonable costs to administer the bid protest. Any such fee must be submitted to City no later than the Bid Protest Deadline, unless otherwise specified. For purposes of this Section, a “working day” means a day that City is open for normal business, and excludes weekends and holidays as observed by the City.
10.2 Protest Contents. The bid protest must contain a complete statement of the basis for the protest and all supporting documentation. Material submitted after the Bid Protest Deadline will not be considered. The protest must refer to the specific portion or portions of the Contract Documents upon which the protest is based. The protest must include the name, address, email address, and telephone number of the person representing the protesting bidder if different from the protesting bidder.
10.3 Copy to Protested Bidder. A copy of the protest and all supporting documents must be concurrently transmitted by fax or by email, by or before the Bid Protest Deadline, to the protested bidder and any other bidder who has a reasonable prospect of receiving an award depending on the outcome of the protest.
10.4 Response to Protest. The protested bidder may submit a written response to the protest, provided the response is received by the City Clerk’s Office before 5:00 p.m., within two working days after the Bid Protest Deadline or after actual receipt of the bid protest, whichever is sooner (the “Response Deadline”). The response must include all supporting documentation. Material submitted after the Response Deadline will not be considered. The response must include the name, address, email address, and t elephone number of the person representing the protested bidder if different from the protested bidder.
Redlands Regular Meeting of 02-06-24
492 of 857
BD 9
10.5 Copy of Protesting Bidder. A copy of the response and all supporting documents must be concurrently transmitted by fax or by email, by or before the Bid Protest Deadline, to the protesting bidder and any other bidder who has a reasonable prospect of receiving an award depending upon the outcome of the protest.
10.6 Exclusive Remedy. The procedure and time limits set forth in this section are mandatory and are the bidder’s sole and exclusive remedy in the event of a bid protest. A bidder’s failure to comply with these procedures will constitute a waiver of any right to further pursue a bid protest, including filing a Government Code Claim or initiation of legal proceedings.
10.7 Right to Award. The City Council reserves the right to award the Contract to the bidder it has determined to be the responsible bidder submitting the lowest responsive bid, and to issue a notice to proceed with the Contract notwithstanding any pending or continuing challenge to its determination.
Redlands Regular Meeting of 02-06-24
493 of 857
BD 10
PROPOSAL
TO: THE CITY OF REDLANDS, SAN BERNARDINO COUNTY, CALIFORNIA herein called the “City”.
Pursuant to and in compliance with your Notice Inviting Bids, and the other documents relating thereto, the undersigned Bidder, having familiarized themselves with the terms of the Contract, the local conditions affecting the performance of the Contract and the cost of the work at the place where the work is to be done, and with the plans thereto, hereby proposes and agrees to perform within the time stipulated, the Contract, including all of its component parts and everything required to be performed, and to provide and furnish any and all of the labor, materials, tools, equipment and all utility and transportation services necessary to perform the contract, and complete in a workmanlike manner, all of the work covered by the contract in connection with the City’s Project identified as
PMP 2023 STREET RESURFACING PROJECT
PROJECT No. 211008
NOTE: Bidders must bid each item in this schedule. All entries in the entire PROPOSAL must be made clearly and in ink. Mistakes shall be lined through and the correct amount written above and initialed by the authorized agent of the Bidder.
BID SCHEDULE
(See “Section 01200 – Measurement and Payment” for Bid Item description) Item
No. Brief Description Estimated
Quantity
Unit Price
(If Applicable) Total Price in Figures
1 Mobilization (Maximum 5%
of Total Bid Price)
LUMP
SUM N/A $______________________
2 SWPPP LUMP
SUM N/A $______________________
3 Survey LUMP
SUM N/A $______________________
4 Crack Seal/Fill and Slurry Seal
(Type II)
112,840
SY $_________/SY $______________________
5 0.1’ AC Grind and 0.1’ AC
Overlay
54,358
SY $_________/SY $______________________
6 Pulverize Top 9" to place 2"
AC over 9" FDR-200
92,934
SY $_________/SY $______________________
Redlands Regular Meeting of 02-06-24
494 of 857
BD 11
BID SCHEDULE (CONTINUED)
(See “Section 01200 – Measurement and Payment” for Bid Item description) Item
No. Brief Description Estimated
Quantity
Unit Price
(If Applicable) Total Price in Figures
7 Asphalt Concrete Paving 10,037
TON $_________/TON
8 Leveling Course 700
TON $_________/TON
9 R/R PCC Curb & Gutter 1,231
LF $_________/LF $______________________
10 AC Dike/Berm (6-inch) 12,150
LF $_________/LF $______________________
11 R/R PCC Gutter Pan 140
LF $_________/LF $______________________
12 Construct X-Gutter w/
Spandrel
400
SF $_________/SF $______________________
13 R/R Driveway Approach 801
SF $_________/SF $______________________
14 Adjust Manhole Ring/Cover
w/ Concrete Collar 122 EA $_________/EA $______________________ 15 Adjust Valve Can & Cover
(circular lid) 129 EA $_________/EA $______________________ 16 Replace Valve Can, Gate
Well & Cover (triangular
lid)
30 EA $_________/EA $______________________
17 Install Blue RPM 106 EA $_________/EA $______________________ 18 Replace Traffic Loops 14 EA $_________/EA $______________________
Redlands Regular Meeting of 02-06-24
495 of 857
BD 12
BID SCHEDULE (CONTINUED)
(See “Section 01200 – Measurement and Payment” for Bid Item description) Item
No. Brief Description Estimated
Quantity
Unit Price
(If Applicable) Total Price in Figures
19 STOP and Misc. Legend
(Thermoplastic) Sheet No. 3 170 EA $_________/EA $______________________ 20 24" Solid White/Yellow
Stripe (Thermoplastic) 297 LF $_________/LF $______________________ 21 12" Solid White/Yellow
Stripe (Thermoplastic)
3,451
LF $_________/LF $______________________
22 8" Solid White Stripe
(Thermoplastic) 88 LF $_________/LF $______________________ 23 6” Double Yellow Stripe
(Thermoplastic)
19,784
LF $_________/LF $______________________
24 6” Solid White Stripe
(Thermoplastic)
26,808
LF $_________/LF $______________________
25 6” Skip White/Yellow Stripe
(Thermoplastic)
9,120
LF $_________/LF $______________________
26 4” Solid White/Yellow Stripe
(Thermoplastic)
14,923
LF $_________/LF $______________________
27 4” Skip White/Yellow Stripe
(Thermoplastic) 700 LF $_________/LF $______________________ 28 Green Bike Lane 34,186
SF $_________/SF $______________________
29 Export Roadway Materials 5,018
CY $_________/CY $______________________
30 Unforeseen work not covered
within all other bid items
LUMP
SUM N/A $ 200,000.00 _
Redlands Regular Meeting of 02-06-24
496 of 857
BD 13
BID SCHEDULE (CONTINUED)
(See “Section 01200 – Measurement and Payment” for Bid Item description)
31 Demobilization LUMP
SUM N/A $______________________
BID SCHEDULE TOTAL PRICE (ITEMS 1-31) $______________________
Last Minute Additions/Deductions*__________________________________________ Bid Item No.________ Last Minute Additions/Deductions*__________________________________________ Bid Item No.________ Last Minute Additions/Deductions*__________________________________________ Bid Item No.________
BID SCHEDULE TOTAL PRICE: $_______________________________________________________
BID SCHEDULE TOTAL PRICE WRITTEN IN WORDS: ________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________
* Provision is made here for the Bidder to include an addition or deduction in its bid, if it wishes, to reflect any last-minute adjustments in prices. The addition or deduction, if made, will be proportionately applied to the Progress Payments total for the respective item in the Schedule of Prices, the amount being added or deducted for each monthly payment. The unit prices entered in the Schedule of Prices will not be affected.
LOW BID DETERMINATION:
The low bid will be determined pursuant to Public Contract Code Section 20103.8 as the lowest bid price on the Bid Schedule Total Price on page BD 13. A responsible bidder who submits the lowest bid as determined by the above method shall be awarded the contract, if it is awarded, by the City Council of the City of Redlands.
Redlands Regular Meeting of 02-06-24
497 of 857
BD 14
ADDENDA
Receipt of the following addenda is hereby acknowledged and the same is included in the Bid Price:
Addendum #1___________ Addendum #2___________ Addendum #3____________ (initials) (initials) (initials)
Addendum #4___________ Addendum #5___________ Addendum #6____________ (initials) (initials) (initials)
ATTEST: (if Corporation)
(Corporation Seal)
___________________________________ _____________________________________ Company Name Signature
____________________________________ _____________________________________ Address Name
____________________________________ _____________________________________ City, State, Zip Title
Redlands Regular Meeting of 02-06-24
498 of 857
BD 15
BID CERTIFICATION
The undersigned certifies that they are familiar with the various State and local laws affecting labor, length of working days, employer's liabilities, Sunday work, alien labor, domestic materials, Subcontractors, etc.
It is understood and agreed that the work under the contract will be commenced by the undersigned Bidder, if awarded the contract, within ten (10) calendar days from the date in the Notice to Proceed and will be completed by the Contractor in the time set forth in the CONTRACT.
Enclosed find Bidders bond or certified or cashier's check No. _________________ on the __________________________________ Bank, in the amount of ______________________ _______________________ which is not less than ten percent (10%) of the Bid submitted by the undersigned, made payable to the City of Redlands, California and which is given as a guarantee that the Bidder agrees that in case of their default in executing said contract with necessary bonds, the bond or check accompanying this Bid and the mone y made payable shall become and remain the property of the City of Redlands.
It is understood and agreed that the City of Redlands has the right to waive defects or irregularities and to accept or reject any or all Bids. No Bidder may withdraw their Bid for a period of sixty (60) days after the time of the Bid Opening except as allowed by the California Public Contract Code.
The following information, required by State law under penalty of perjury, is true and correct. Failure to complete this information renders the bid non-responsive, and the bid must be rejected.
____________________________________ _______________________________________ Company Name Signature
____________________________________ _______________________________________ Address Signatory's Title
____________________________________ _______________________________________ City, State, Zip State License Number and Class
____________________________________ _______________________________________ Telephone Number License Expiration Date
Dated this ________________ day of ___________________, 20___.
Redlands Regular Meeting of 02-06-24
499 of 857
BD 16
BID BOND
KNOW ALL PERSONS BY THESE PRESENTS,
That ______________________________________________________________ as Principal, and ______________________________________ as Surety, are held and firmly bound unto the City of Redlands, hereinafter called City, in the sum of ____________________________ __________ dollars, for the payment of which sum well and truly to be made, we bind ourselves, our heirs, executors, administrators, successors, and assigns, jointly and severally, firmly by these presents.
WHEREAS, said Principal has submitted a bid to said City to perform all work required under the PROJECT No. 211008.
NOW, THEREFORE, if said Principal is awarded a contract by said City and, within the time and in the manner required under the heading "Instructions to Bidders" bound with said Specifications, enters into a written contract on the form of agreement bound with said Specifications and furnishes the required bonds, one to guarantee faithful performance and the other to guarantee payment for labor and materials; then this obligations shall be null and void, otherwise it shall remain in full force and effect. In the event suit is brought upon this bond by said City and Judgment is recovered, said Surety shall pay all costs incurred by said City in such suit, including a reasonable attorney's fee to be fixed by the court.
SIGNED AND SEALED, this _________ day of _____________________________, 20____.
______________________________(SEAL) _______________________________(SEAL) (Principal) (Surety)
By:_________________________________ By:__________________________________ (Signature) (Signature)
Address:______________________________
_____________________________________
Telephone (___)________________________
(Seal and Notarial Acknowledgment of Surety)
Redlands Regular Meeting of 02-06-24
500 of 857
BD 17
STATEMENT BY BIDDER
NON-COLLUSION AFFIDAVIT
STATE OF )
) ss
COUNTY OF )
, being first duly sworn, deposes and says that
he is
(Sole Owner, a Partner, President, Secretary, etc.)
of
(Contractor)
the party making the foregoing bid on PROJECT No. 211008 that such bid is not made in the interest of or on behalf of any undisclosed person, partnership, company, association, organization, or corporation; that the bid is genuine and not collusive or sham; that the Bidder has not directly or indirectly induced or solicited any other Bidder to put in a false or sham bid, and has not directly or indirectly colluded, conspired, connived, or agreed with any Bidder or anyone else to put in a sham bid, or that anyone shall refrain from bidding; that the Bidder has not in any manner, directly or indirectly, sought by agreement, communication, or conference with anyone to fix the bid price of the Bidder or of any other Bidder or to fix any overhead, profit, or cost element of the bid price or of that of another bidder, o r to secure any advantage against the public body awarding the Contract of anyone interested in the proposed contract; that all statements contained in such bid are true; and further, that the Bidder has not directly or indirectly, submitted his bid price or any breakdown thereof, or the contents thereof, or divulged information or data relative thereto, or paid, and will not pay, any fee to any corporation, partnership, company, association organization, bid depository, or to any member or agent thereof to effectuate a collusive or sham bid.
By: ______________________________ Title: ________________________________
Subscribed and sworn to before me this day of __________________________, 20 .
Signature of Officer Administering Oath
(Notary Public)
Redlands Regular Meeting of 02-06-24
501 of 857
BD 18
STATEMENT BY BIDDER
OFFICERS OF CORPORATION (Members of Firm)
The names of all persons interested in the foregoing proposals as principals, are as follows:
(IMPORTANT NOTICE - if Bidder or other interested person is a corporation, state legal name of corporation, also names of the president, secretary, treasurer and manager thereof; if a co-partnership, state true name of firm, also names of all individual co-partners composing firm; if Bidder or other interested person is an individual, state first and last names in full).
_____________________________________ _____________________________________
_____________________________________ _____________________________________
_____________________________________ _____________________________________
Licensed in accordance with an act providing for the Registration of Contractors, License
No. ______________________________________.
Signature of Bidder Dated
NOTE: If Bidder is a corporation, the legal name of the corporation shall be set forth above, together with the signature of the officer(s) authorized to sign contracts on behalf of the corporation; if Bidder is a co-partnership, the true name of the firm shall be set forth above, together with the signature of the partner or partners authorized to sign contracts in behalf of the co-partnership, and if the Bidder is an individual, that signature shall be placed above.
Redlands Regular Meeting of 02-06-24
502 of 857
BD 19
STATEMENT BY BIDDER
SUB-CONTRACTORS LIST
Bidder supplies the following information for any Subcontractor who will perform work or labor or render services to the prime contractor, etc. to be used on PROJECT No. 211008, all in accordance with Section 4104 of the California Public Contract Code.
LICENSED SUBCONTRACTOR’S NAME
AND BUSINESS ADDRESS
LICENSE #
SPECIFIC
DESCRIPTION
OF SUBCONTRACT
& BID ITEM #
% OF BID
ITEM TO BE
PERFORMED
Redlands Regular Meeting of 02-06-24
503 of 857
BD 20
STATEMENT BY BIDDER
QUALIFICATION AND EXPERIENCE STATEMENT
The following outline is a record of the undersigned Bidder's experience in construction of three (3) projects of a type similar in magnitude and character to that contemplated under PROJECT No. 211008 within the past two years. Include the location of each project as well as the name, address, and phone number of the owner, and name of individual to contact.
Subcontractors performing in excess of one half of one percent of the prime Contractor’s total bid, or in the construction of streets or highways, one half of one percent of the prime contractor’s total bid or ten th ousand dollars ($10,000), which ever is greater shall provide a similar outline.
Additional pages outlining this portion of the Bid may be attached. Failure to provide this statement may result in rejection of the bid by the City of Redlands.
1. Owner's Name:
Contact Person: Phone: ( ) Address of Owner:
Project Description:
Amount of Contract: Completion Date:
2. Owner's Name:
Contact Person: Phone: ( ) Address of Owner:
Project Description:
Amount of Contract: Completion Date:
3. Owner's Name:
Contact Person: Phone: ( ) Address of Owner:
Project Description:
Amount of Contract: Completion Date:
Redlands Regular Meeting of 02-06-24
504 of 857
BD 21
STATEMENT BY BIDDER
GENERAL INFORMATION
1. Bidder's Mailing Address
2. Number of years engaged in the contracting business under your present firm or trade name:
3. Have you ever failed to complete any work awarded to you? (Yes or No) . If yes, provide details in the space provided in Item 10.
4. Have you ever defaulted on a contract? (Yes or No) . If yes, provide details in the space provided in Item 10.
5. Have you ever been a party to a lawsuit or gone to arbitration during the last 5 years? (Yes or No) . If yes, provide details in the space provided in Item 10.
6. Has any Stop Notice been filed against you during the last 5 years? (Yes or No) . If yes, provide details in the space provided in Item 10.
7. Has your contractor's license ever been suspended, revoked, or subject to disciplinary action? (Yes or No) . If yes, provide details in the space provided in Item 10.
8. Contracts currently on hand:
Agency Name Amount of Contract Start Date Completion Date
9. Enter the name of person(s) who inspected the site of the proposed work for your firm and the date of said site inspection.
Name: Date:
Redlands Regular Meeting of 02-06-24
505 of 857
BD 22
10. In the space provided, the Bidder shall provide details concerning any "Yes" answers provided in this "General Information" section. Details shall include, but not be limited to, the nature of dispute, name of the agency involved and the final outcome. I f requested by the City, the Bidder shall supply additional information, sufficiently detailed, to permit evaluation of the Bidder's ability to perform the work.
Question
Number Details
Redlands Regular Meeting of 02-06-24
506 of 857
CONTRACT DOCUMENTS
(CD)
Redlands Regular Meeting of 02-06-24
507 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
508 of 857
PUBLIC WORK CONSTRUCTION CONTRACT
This Public Work Construction contract (“Contract”) is made and entered into this ___ day of ____________, 2024, by and between the City of Redlands , a municipal c orporation, organized and existing under the laws of the S tate of California (hereinafter “City”), and __________________ (hereinafter "Contractor"). City and Contractor are sometimes individually referred to herein as a “Party” and, together, as the “Parties.”
In consideration of the mutual promises contained herein, City and Contractor agree as follows:
1. SCOPE OF WORK: Contractor shall furnish all materials and will perform all of the work for the following: PMP 2023 Street Resurfacing Project , complete all items as required by the Contract Documents (as herein def ined) and Specifications for City’s PMP 2023 Street Resurfacing Project, Project No. 211008 (the “Work”).
2. CONTRACT SUM: City shall pay Contractor the sum of ___________________ dollars ($___________) as consideration for its performance of the Work in accordance with the terms and conditions set forth in the Contract Documents. Pursuant to Public Contract Code Section 22300, Contractor has the option to deposit securities with an escrow agent as a substitute for retention of earnings required to be withheld by City pursuant to an escrow agreement as set forth in Public Contract Code section 22300.
3. TIME FOR COMPLETION: The W ork shall be completed within on hundred ten (110) working day(s) as defined in Section 1 -2 of the Standard Specifications for Public Works Construction “Greenbook” from and after the date of City’s issuance of a Notice to Proceed to Contractor.
4. LIQUIDATED DAMAGES: Contractor’s failure to complete the Work within the time allowed will result i n damages being sustained by City. Such damages are, and will continue to be, impracticable and extremely difficult to determine. Accordingly, Contractor shall pay to City, or have withheld from monies due to Contractor, the sum of one thousand dollars ($1000) for each working day as defined in Section 1 -2 of the Standard Specifications for Public Works Construction “Greenbook” in excess of the specified time for completion of the Work. Execution of this Contract shall constitute agreement by City and Contractor that one thousand dollars ($1000) per day is the estimated damage to City caused by the failure of Contractor to complete the work within the allowed time. Such sum is liquidated damages and shall not be construed as a penalty, and may be deducted from payments due Contractor if such delay occurs.
5. CONTRACT DOCUMENTS: This Contract incorporates by reference the following: Notice Inviting Bids, Instructions to Bidders, Contractor’s Proposal, Bid Bond, Agreement, Performance Bond, Labor and Material Bond, Plans, General Conditions, Special Provisions and Specifications, and any addenda thereto (collectively, the “Contract Documents”).
6. ATTORNEYS' FEES: In the event any action is commenced to enforce or interpret the terms or conditions of this Contract, or the Contract Documents, the prevailing Party in such action, in addition to any costs and other relief, shall be entitled to recover its r easonable attorneys’ fees, including fees for use of in-house counsel by a Party.
7. RESOLUTION OF CONSTRUCTION CLAIMS: Claims by Contractor in the amount of three hundred seventy five thousand dollars ($375,000) or less shall be made by Contractor and Redlands Regular Meeting of 02-06-24
509 of 857
processed by the City pursuant to the provisions of Part 3, Chapter 1 , Article 1.5 of the Public Contract Code (commencing with Section 20104). All claims shall be in writing and include the documents necessary to substantiate the claim. Nothing in subdivision (a) of Public Contract Code Section 20104.2 shall extend the time limit or supersede the notice requirements provided in this case from filing claims by Contractor.
8. ELIGIBILITY OF CONTRACTOR/SUBCONTRACTOR: Contractor and all of its subcontractors shall abide by California Public Contract Code, Section 6109, and California Labor Code Sections 1777.1 and/or 1777.7, and certify that they are not debarred and are eligible to work on this project.
9. ASSIGNMENT OF AGREEMENT: No assignment by a Party of any rights or interests under this Contract shall be binding on another Party without the written consent of the Party sought to be bound.
10. SUCCESSORS AND ASSIGNS: City and Contractor each binds itself and their respective successors and assigns in respect to all covenants, agreements, and obligations contained in the Contract Documents.
11. SEVERABILITY: Any provision or part of the Co ntract Documents held to be void or unenforceable under any law or regulation shall be deemed stricken, and all remaining provisions shall continue to be valid and binding upon City and Contractor.
Redlands Regular Meeting of 02-06-24
510 of 857
IN WITNESS WHEREOF, the Parties hereto have executed this Contract the day and year first written above.
CITY OF REDLANDS
(SEAL)
By:____________________________________
Eddie Tejeda, Mayor
ATTEST:
____________________________________
Jeanne Donaldson, City Clerk
(SEAL)
__________________________________________
Name of Contractor
By:_______________________________________
Signature of Authorized Agent
__________________________________________
Title
__________________________________________
Signature of Authorized Agent (if necessary)
__________________________________________
Title
__________________________________________
Contractor's License No.
Redlands Regular Meeting of 02-06-24
511 of 857
WORKER'S COMPENSATION INSURANCE CERTIFICATION
Description of Contract: City of Redlands
Municipal Utilities and Engineering Department
PMP 2023 Street Resurfacing Project
Project No. 211008
Every employer, except the Sta te, shall secure the payment of compensation in one or more of the following ways:
a. By being insured against liability to pay compensation by one or more insurers duly authorized to write compensation insurance in this State. b. By securing from the Director of Industrial Relations, a certificate of consent to self - insure, either as an individual employer, or as one employer in a group of employers, which may be given upon furnishing proof satisf actory to the Director of Industria l Relations of ability to self-insure and to pay any compensation that may become due to his or her employees.
CHECK ONE
_____I am aware of the provisions of Section 3700 of the Labor Code which requires every employer to be insured against liability fo r Workers’ Compensation or to undertake self-insurance in accordance with the provisions of that Code, and I will comply with such provisions before commencing the performance of the work and activities required or permit ted under this Agreement. (Labor Code §1861).
_____I affirm tha t at all times, in performing the work and activities required or permitted under this Agreement, I shall not employ any person in any manner such that I become subject to the workers’ compensation laws of California. However, at any time, if I employ any person such that I become subject to the workers’ compensation laws of C alifornia, immediately I shall provide the City with a certificate of consent to self -insure, or a certification of wor kers’ compensation insurance.
I certify under penalty of perjury under the laws of the State of California that the information and representations made in this certificate are true and correct.
Dated this day of , 2024. _____________________________________
(Contractor)
_____________________________________
(Signature)
_____________________________________
(Official Title)
(SEAL)
(Labor Code Section 1861 provides that the above certificate must be signed and filed by the Contractor with the Owner prior to performing the work of the contract.)
Redlands Regular Meeting of 02-06-24
512 of 857
FAITHFUL PERFORMANCE BOND
Whereas, the City of Redlands (“City”), State of California, and ______________ (hereinafter designated as "Principal") have entered into an agreement dated _____, 2024 (“Agreement”) whereby Principal agrees to install and complete certain public improvements ( the “Work”), which said Agreement is identified as PMP 2023 Street Resurfacing Project, Project No. 211008 and is hereby referred to and made a part hereof; and
Whereas, said Principal is req uired under the terms of the A greement to furnish a bond for the faithful performance of the Work, now, therefore, we, the Principal and , _____________________________, as Surety, are held and firmly bound unto the City in the penal sum of ________________________________ dollars ($_______________) lawful money of the United States, for the payment of which sum we bind ourselves, and our heirs, successors, executors and administrators, jointly and severally, firmly by these presents.
The condition of th is obligation is such that if the above bounded Principal, his or its heirs, executors, administrators, successors or assigns, shall in all things stand to and abide by, and well and truly keep and perform the covenants, conditions and provisions in the Ag reement and any alteration thereof made as therein provided, on his or its part, to be kept and perfor med at the time and in the manner therein specified, and in all respects according to their true intent and meaning, and shall faithfully fulfill the one -year guarantee of all material s and workmanship, and shall defend, indemnify and save harmless the City and its elected officials, officers, agents and employees, as therein stipulated, then this obligation shall become null and void; otherwise it shall be and remain in full force and effect.
As a part of the obligation secured hereby and in addition to the face amount specified therefor, there shall be included costs and reasonable expenses and fees, including reasonable attorneys’ fees, incurred by the City in successfully enforcin g such obligations, all to be taxed as costs and included in the judgment rendered.
As a condition precedent to the satisfactory completion of the Work, the above obligation shall hold good for a period of one (1) year or lon ger if required by the Agreeme nt after the acceptance of the work by the City, during which time if th e Principal shall fail to make full, complete, and satisfactory repair and replacements and totally protect the City from loss or damage made evident duri ng this period from the date o f completion of the Work, and resulting from or caused by defective materials or faulty workmanship, the above obligation in penal sum thereof shall remain in full force and effect. The obligations of Surety hereunder shall c ontinue so long as any obligation of the Principal remains.
Whenever the Principal shall be, and is declared by the City to be, in default under the Agreement, the City having performed the City obligations thereunder, the Surety shall promptly remedy the default, or shall promptly, at the City’s option:
1. Complete the Work in accordance with its terms and conditions; or
2. Obtain a bid or bids for completing the Work in accordance with its terms and conditions, and upon determination by Surety of t he lowest responsive and respo nsible bidder, arrange for a contract between such bidder and the City, and make available as work progresses sufficient funds to pay the cost of completion of the Work less the balance of the Agreement price, but not exceeding, including other costs and damages for which Surety may be liable hereunder, the Redlands Regular Meeting of 02-06-24
513 of 857
amount set forth above. The term “balance of the Agreement price,” as used in this paragraph, shall mean the total amount payable to the Principal by the City under the Agre ement and any modifications thereto, less the amount previously properly paid by the City to the Principal.
Surety expressly agrees that the City may reject any contractor or subcontractor which may be proposed by Surety in fulfillment of its obligations in the event of default by the Principal.
Surety shall not utilize the Principal in completing the Work nor shall Surety accept a bid from the Principal for completion of the Work if the City, when declaring the Principal in default, notifies Surety o f the City’s objection to the Principal’s further participation in the completion of the Work.
No right of action shall accrue on the bond to or for the use of a ny person or corporation other than the City named herein or the successors or assigns of the City. Any suit under this bon d must be instituted within the applicable statute of limitations period.
The said Surety, for value received, hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the Agreem ent or to the work to be perfo rmed thereunder or the Specifications accompanying the same shall in any way affect its obligations on this bond, and it does hereby waive notice of any such change, extension of time, alteration or addition to the terms of the Agreement or to the work or to the specifications.
No final settlement between the City and the Principal shall abridge the right of any beneficiary hereunder whose claim may be unsatisfied.
The Principal and Surety agree that if the City is required to engage the services of any attorney in connection with the enforcement of this bond, each shall pay the City’s reasonable attorneys’ fees incurred, with or without suit, in addition to the above sum.
In witness whereof, this instrument has been duly executed by the Principal and Surety above named, on , 2024.
(SEAL) (SEAL)
(Contractor) (Surety)
BY:
(Signature) (Signature)
Address:___________________________________
__________________________________________
(Seal and Nota rial Acknowledgment of
Surety)
Telephone ( )___________________________
Redlands Regular Meeting of 02-06-24
514 of 857
LABOR AND MATERIAL BOND
Whereas, the City Council of the City of Redlands, State of California, and ________________ (hereinafter designated as “Principal”) have enter ed into an agreement (the “Agreement”) whereby Principal agrees to install and complete certain designated public improvements (the “Work”), which said agreement, dated ____________, 2024, and identified as PMP 2023 Street Resurfacing Project, Project No. 211008 is hereby referred to and made a part hereof; and
Whereas, under the terms of the Agreement, Principal is required before commen cing the performance of the Work, to file a good and sufficient Labor and Material bond with the City of Redlands to se cure the claims to which refer ence is made in Title 3 (commencing with Section 9550) of Part 6 of Division 4 of the Civil Code of the State of California.
Now, therefore, said Principal and the undersigned as corporate surety, are held firmly bound unto t he City and all contractors, s ubcontractors, laborers, material men and other persons employed in the performance of the Agreement and ref erred to in the aforesaid Code of Civil Procedure in the sum of ______________ dollars ($_____) for materials furnished or labor thereon of any kind, or for amounts due under the Unemployment Insurance Act with respect to such work or labor, that said surety will pay the same in an amount not exceeding the amount hereinabove set forth, and also in case suit is brought upo n this bond, will pay, in addi tion to the face amount thereof, costs and reasonable expenses and fees, including reasonable attorneys’ fee s, incurred by the City in successfully enforcing such obligation, to be awarded and fixed by the court, and to be taxed as costs and to be included in the judgment therein rendered.
It is hereby expressly stipulated and agreed that this bond shall insure to the benefit of any and all persons, companies and corporations entitled to file claims under Title 3 (commencing w ith Section 9550) of Part 6 of Division 4 of the Civil Code, so as to give a right of action to them o r their assigns in any suit brought upon this bond.
Should the condition of this bond be fully performed, then this obligation shall become null and void, otherwise it shall be and remain in full force and effect.
The surety hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the Agreement or the specifications accompanying the same shall in any manner af fect its obligations on this b ond, and it does hereby waive notice of any such change, extension of time, alteration or addition.
In witn ess whereof, this instrument has been duly executed by the Principal and surety above named, on _______________________, 2024.
(SEAL) (SEAL)
(Contractor) (Surety)
BY:
(Signature) (Signature)
Address:_____________________________
(Seal and Notarial Acknowledgement of Surety) ____________________________________ Telephone: ( )___________________
Redlands Regular Meeting of 02-06-24
515 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
516 of 857
GENERAL CONDITIONS
(GC)
Redlands Regular Meeting of 02-06-24
517 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
518 of 857
GC 1
GENERAL CONDITIONS
The Standard Specifications for Public Works Constructions, 2021 Edition (Greenbook), together with supplements as published by Building News, Inc., are modified herein and comprise the Standard Specifications. For convenience, the section and subsection numbering system used in these modifications correspond to those used in the Greenbook. Unless specifically deleted or modified herein, all requirements of the Greenbook shall prevail.
SECTION 1 – GENERAL, TERMS, DEFINITIONS, ABBREVIATIONS,
UNITS OF MEASURE, AND SYMBOLS
1-2 TERMS AND DEFINITIONS.
Agency - Amend as follows:
“The legal entity (City) for which the Work is being performed.”
Bidder - Amend as follows:
“Any individual, firm, partnership, corporation, or combination thereof, licensed in accordance with the provisions of Chapter 9, Division III of the Business and Professions Code, submitting a Bid for the Work, acting directly or through a duly authorized representative.”
City. The City of Redlands, San Bernardino County, California, being the legal entity for which the Work is being performed. Also referred to as Agency or Owner.
City Council. The City Council of the City of Redlands, San Bernardino County, California, being the body authorizing entrance into legal agreements and allowing work in public right -of- way or on public property controlled by the City of Redlands. Also referred to as Board.
Engineer - Amend as follows:
“The City Engineer of the Agency, or other person designated by the City Engineer, acting either directly or through authorized agents.”
Fabricated. An item specifically assembled or made out of selected materials to meet individual design requirements.
Guarantee. See Warranty.
Laboratory. The designated laboratory authorized by the City of Redlands to test materials and work involved in the Contract.
Manufactured. A standard mass-produced unit or item meeting design requirements.
Owner. The City of Redlands, San Bernardino County, California.
Pavement. The uppermost layer of material placed on the traveled way or shoulder. Also referred to as surfacing.
Redlands Regular Meeting of 02-06-24
519 of 857
GC 2
Rain Day. A scheduled working day wh en you cannot perform work on the controlling activity for at least 50 percent of the day with at least 50 percent of the normal labor and equipment due to adverse weather-related conditions that cause the Contractor to dismiss the crew.
Street - Delete and replace with the following:
“Any road, highway, parkway, freeway, avenue, street, lane, alley, crossing, intersection, court, place, circle, walk, way, or any public right-of-way within the jurisdiction of the Agency.”
Surety - Delete and replace with the following:
“An admitted corporate surety as listed by the United States Department of Treasury and duly licensed to conduct business in the State of California and County of San Bernardino and acceptable to the City of Redlands, bound with and for the Contractor for the acceptable performance, execution, and completion of the Work, and for the satisfaction of all obligations incurred.”
Warranty. An extended insurance by the Contractor, of any product or item of work installed as a part of this project for replacement and/or repair for the time period specified, including but not limited to, all parts, labor, materials, tools, equipment costs, etc. necessary for the product or item of work to be in proper and acceptable working condition after completion of the project. For the purposes of this Contract, the period of coverage shall begin on the date of the Notice of Completion filed by the Owner.
Working Hours. Unless specified otherwise, working hours shall be from 7:00 AM to 4:00 PM, Monday through Friday, inclusive. Saturdays, Sundays, and City Holidays, as shown on the current year Construction Schedule, are excluded unless authorized by the City.
1-7.2 CONTRACT BONDS. - Add the following sentence to paragraph 1:
The warranty provisions set forth in Section 7-18 shall be secured by the Contract Performance Bond required under this section and said Bond shall remain in full force and effect for a period of one year from the date of completion as specified in the Notice of Completion.
SECTION 2 - SCOPE OF THE WORK
2-2 PERMITS. - Amend the following:
Amend the first sentence of paragraph 1 as follows:
“The Contractor will obtain all permits necessary to perform the work in streets, highways, railways or other rights-of-way.”
Add the following sentence between the first and second sentences of paragraph 1:
For all work within Caltrans right -of-way, the Contractor shall obtain their own Caltrans Encroachment Permit and pay all necessary permit and inspection fees as required by Caltrans.
Redlands Regular Meeting of 02-06-24
520 of 857
GC 3
Add the following paragraph:
The Contractor shall, prior to the start of work, procure all permits and licenses, including but not limited to, a City Business License for itself, subcontractors, and all parties performing actions associated with this contract within the City of Redlands , City Truck Route Permit, City Street/Lane Closure Permit, City Encroachment Permit, USA Verification Number, DOSH Excavation Permit, other permits required by agencies and/or utilities having jurisdiction on the work, pay all charges and fees required by the City, other agencies and utilities, and give all notices necessary and incidental to the due and lawful prosecution of the work. All City permits associated with this project are no fee to the Contractor.
SECTION 3 - CONTROL OF THE WORK
3-7 CONTRACT DOCUMENTS.
3-7.1 General. – Add the following paragraphs:
Contractor’s working drawings or plans for any structure not included in the plans shall be approved by the Engineer before any work is performed. It is mutually agreed that approval by the Engineer of the Contractor’s working plans does not relieve the Contractor of any responsibility for accuracy of dimensions and details, and that the Contractor shall be responsible for agreement and conformity of their working plans with the approved plans and specifications.
Finished surfaces in all cases shall conform with the lines, grades, cross sections, and dimensions shown on the approved plans. Deviations from the approved plans will be determined by the Engineer and approved in writing. In the event of a discrepancy between any drawing and the figures written thereon, the figures shall be taken as correct.
Should it appear that the work to be done or any matter thereto is not sufficiently detailed or explained by the plans and specification, the Contractor shall apply to the Engineer for such further explanation as may be necessary and shall conform to such explanation or interpretation as part of the Contract so far as may be consistent with the intent of the original plans and specifications.
3-7.1.1 Preconstruction Meeting. The Contractor to whom the contract is awarded, and all his major subcontractors, shall attend a pre -construction meeting. The time and location of said meeting will be set by the City. Contractor will be given adequate notice of such meeting. It shall be the Contractor's responsibility to notify his subcontractors of the time and location of the meeting. All submittals as required under the General Requirements shall be submitted by the Contractor at the time of the meeting.
The Contractor will be provided with an electronic (.PDF file) of the conformed plans and specifications for their use throughout the project. Contractor is responsible for all costs of reproduction.
Progress meetings will be scheduled by the City. The Contractor will be given at least five working days notice of the time and location of said meetings. The Contractor has the responsibility of notifying his subcontractors, suppliers, and fabricators of the time and location of said meetings.
Meetings will be held either at the job site, at the offices of the C ity of Redlands, or at any other Redlands Regular Meeting of 02-06-24
521 of 857
GC 4
location approved by the City. The Contractor may request, in writing, that a meeting be held.
The City will schedule a meeting at the Contractor’s request not more than five working days after receiving said written notice.
3-7.2 Precedence of Contract Documents. – Replace paragraph 2 with the following:
The precedence shall be (A. being highest, O. being lowest):
A. Permits from other Agencies as may be required by law.
B. Change Orders.
C. Contract.
D. Addenda.
E. Bid Schedule/Proposal.
F. General Requirements.
G. Technical Specifications.
H. Plans.
I. MUED General Permit Conditions and Trench Specifications.
J. City of Redlands Water & Sewer Systems Standard Specifications.
K. General Conditions.
L. City of Redlands Standard Specifications and Detail Drawings for Design and Construction of Public Improvements and all Supplements
M. Standard Specifications for Public Works Construction (SSPWC), 2018 Edition N. Standard Plans for Public Works Construction, 2012 Edition O. Reference Specifications.
3-8.7 Record Drawings. The Contractor shall maintain at the job site, a set of record drawings for the work showing: exact location information of all existing underground utilities encountered, final locations determined in the field, any deviations from the plans and specifi cations and new work performed within the work area; and all differences between the work as drawn and as installed for all concealed work as well as work added which is not shown on the drawings. Concealed work shall mean all work installed underground or in an area which cannot be readily inspected by use of access panels, inspection plates or other removable features. When vacuum excavation (potholing) services are required, contractor to provide report that identifies depth and alignment of underground utilities.
These record drawings shall be kept current and legible, and shall be available for inspection at all times by the Engineer, Architect and Contractor. All information, changes in the work or work added on these record drawings shall be marked in red. All markings shall use the same legends that are used on the drawings. Indicate locations by exact dimensions and elevations. Give dimensions and elevations from a permanent reference point and prepare all changes to scale.
At the end of construction, the contractor shall prepare one set of marked -up prints of the record drawings indicating any and all revisions and changes to the drawings reflecting As-Built conditions.
The drawings shall also contain a listing of all subcontractors who worked on the construction project.
The As-Built drawings will be submitted to the Municipal Utilities and Engineering Department for review and approval by the City Inspector and Engineer.
The design engineer or City staff shall prepare the final As-Built drawings for record purposes in one of the following two ways: (1) Check out the original drawings from the City and manually revise the Redlands Regular Meeting of 02-06-24
522 of 857
GC 5
drawings to reflect the As-Built condition; or (2) Re-plot the original drawings electronically on 4 mil mylars and make revision s electronically to reflect the As-Built conditions. The final As -Built drawings will be reviewed and approved by the City Inspector and Engineer
The construction related bonds will not be released by the City until the As-Built drawings are accepted by the Engineer and all City stipulated conditions for the release of the bonds have been satisfied.
3-10 SURVEYING.
3-10.3 Line and Grade. - Add the following sentences to paragraph 1:
All distances and measurements shown are and will be made in a horizontal plane. Construction line and grade staking shall be set at maximum intervals of 25 feet when the grade is 0.50 percent or greater. Construction line and grade staking shall be set at maximum intervals of 12 feet when the grade is less than 0.50 percent.
3-10.4 Permanent Survey Markers.
The Registered (licensed) Land Surveyor or Registered Civil Engineer authorized to practice land surveying in accordance with all provisions of Section 8771 of the Business and Profession Code shall be hired as a subcontractor or employed by the Contractor.
3-10.5 Survey Service.
Contractor shall be responsible for: furnishing all surveying and staking, horizontal and vertical, as shown on the plans and in accordance with the specifications; furnishing all staking for sub-grade and base course grades per typical sections; replacing any existing monuments and ties which have been destroyed by construction; identifying, locating and tying out all monuments and ties necessary within the work area; and shall reinstall all disturbed monuments and ties, supplying the Engineer with copies of monument and tie sheets recorded with the County Surveyor in accordance with applicable State law. Monuments shall be approved by the Engineer.
Surveying and staking shall be done by a Registered (licensed) Land Surveyor or Registered Civil Engineer authorized to practice land surveying in accordance with all provisions of Section 8771 of the Business and Professions Code.
Unless otherwise specified, stakes will be set and stationed by the Contractor’s surveyor for curbs, headers, sewers, storm drains, structures, rough grade and all other staking necessary for the construction of the work. A corresponding cut or fill to finished grade (or flowline) will be indicated on a grade sheet to be supplied to the Engineer. The Contractor shall dig all holes necessary for line and grade stakes.
3-13 COMPLETION, ACCEPTANCE, AND WARRANTY.
3-13.2 Acceptance. - Add the following paragraphs:
The Contractor shall submit written assertion that the work has been completed prior to the Engineer making final inspection. The Engineer will have 48 hours to inspect the work. If the Engineer determines that the work is not complete, written notice will be given.
Redlands Regular Meeting of 02-06-24
523 of 857
GC 6
Until final acceptance of work by the Engineer, the Contractor shall have charge and care thereof from damage caused by the action of the elements or from any other cause, whether arising from the execution or from the non-execution of the work. The Contractor shall rebuild, repair, restore, and make good all injuries or damage to any portion of the work occasioned by any of the above causes before final acceptance and shall bear the expense thereof.
All work which has been rejected shall be remedied or removed and replaced by the Contractor at their expense with work conforming to the plans and specifications. Any defective material or workmanship which may be discovered before final acceptance or within one year from the date of final acceptance shall be immediately corrected by the Contractor at their expense, notwithstanding that it may have been overlooked in previous inspections and estimates. Failure to inspect work at any stage shall not relieve the Contractor from any obligation to perform sound and reliable work as herein described. It is the Contractor ’s ultimate responsibility to deliver a complete, operational project that complies in all details with these specifications, at the time of final acceptance.
Any omission or failure on the part of the City to discover or notify the Contractor of or to condemn defective work or material at the time of construction shall not be deemed as acceptance, and the Contractor will be required to correct defective work or material prior to final acceptance.
The City will endeavor to locate any errors or defective materials or workmanship and call them to the attention of the Contractor prior to subsequent work being performed. However, the City is under no obligation to do so and shall not be held liable because errors or defective material or workmanship by the Contractor are not discovered prior to subsequent work.
Nothing in this section shall be construed to limit the rights of the City to immediately correct conditions which are unsafe or which pose a public health nuisance. Should said corrections later be found to be caused by defective material and/or workmanship, the Contractor and their surety shall reimburse the City for costs reasonably incurred while attending the situation.
In the event it is necessary for the City to file suit to enforce any liability of the Contractor pursuant to this Section, the City shall be entitled to recover from the Contractor, in addition to all other amounts found due and owing, costs of suit and reasonable expenses and fees including reasonable attorneys’ fees incurred by the City in successfully enforcing the Contractor’s obligation, all to be taxed as costs and included in any judgment rendered.
3-13.3 Warranty. - Amend the following:
Amend the first sentence of the paragraph 3:
“The warranty period for specific items covered under manufacturers’ or suppliers’ warranties shall commence from the date of the final acceptance, except where longer warranty periods are specified.”
Add the following paragraphs:
All start-up and testing shall be complete, approved and accepted before final acceptance, substantial completion, or beneficial occupancy.
Redlands Regular Meeting of 02-06-24
524 of 857
GC 7
The warranty provided herein shall not be in lieu of, but shall be in addition to any warranties or other obligations otherwise imposed by the specifications or by law. The remedies provided herein shall not be exclusive and the City shall be entitled to any and all remedies provided by law.
3-14 INSPECTION.
The Contractor shall notify the Engineer at least 24 hours in advance before inspection is required.
Whenever the Contractor varies the period during which work is carried on each day, due notice shall be given to the Engineer so that proper inspection may be provided. Varied working hours may be allowed only upon written authorization from the Engineer.
Work financed in whole or in part with funds from another public entity or performed within the jurisdiction of another public entity shall be subject to inspection at all times by authorized representatives of that entity.
The work shall be ready for inspection, whether by City, other public entities or independent testing laboratories, at the scheduled times arranged by the Contractor. If, in the City’s sole judgment, the work is not ready and the inspection must be rescheduled, the Contractor shall be notified. The Contractor shall reschedule the inspection and provide the proper 24 hour notification for the rescheduled inspection. Any costs incurred by the City fo r rescheduled inspections shall be reimbursed prior to the release of Bonds.
In order to allow for inspection, the Contractor shall notify the City’s inspector sufficiently in advance of the permanent concealment of any materials or work. The City ’s inspector shall make the appropriate notifications to other public entities and independent testing laboratories for inspections.
All inspections required in the specifications for this project shall be coordinated through the City’s inspector.
If any work is concealed or performed without the prior notice specified, the work shall be subject to such tests or exposure as may be necessary to prove to the City, Architect and Engineer, that the materials used and the work performed are in conformity with the drawings and specifications. All labor, tools, materials and equipment necessary for exposing and testing shall be furnished by the Contractor at their expense. The Contractor shall replace at their expense, any materials or work damaged by exposure or testing.
Overtime inspection may be requested by the Contractor. Overtime inspection includes but is not limited to, any hours worked outside of the inspector’s normal working hours including weekends and holidays. Such requests shall be on a case-by-case basis as determined by the Engineer. If the Engineer so determines and approves, overtime inspection shall be paid for by the Contractor at the current City billing rate at the time of request or as billed by other public entities or independent testing laboratories. Any costs incurred by the City for overtime inspection shall be reimbursed prior to the release of Bonds.
SECTION 4 - CONTROL OF MATERIALS
4-1 GENERAL. - Delete and replace with the following:
Redlands Regular Meeting of 02-06-24
525 of 857
GC 8
Should any work performed or material furnished under the Contract prove defective or not in accordance with the Plans and Specifications and in the opinion of the Engineer such defect is not of sufficient magnitude or importance to make the work dangerous or unusable, or if the removal of such work is impracticable or will create dangerous or undesirable conditions, the Engineer at his discretion shall have the right and authority to retain such work instead of requiring it to be removed and reconstructed, but he shall make such deductions therefore in the payment due the Contractor as may be just and reasonable.
4-1.1 Warranty of Title. No materials, supplies or equipment for the work under this Contract shall be purchased subject to any chattel mortgage or under a conditional sale contract or other agreement by which an interest therein or any part thereof is retained by the seller or supplier. The Contractor warrants clear and good title to all materials supplied and equipment installed and incorporated in the work and agrees, upon completion of all work, to deliver the premises, together with all improvements and appurtenances constructed or placed thereon by him, to the Owner free from any claims, liens, encumbrances or charges, and further agrees that neither he nor any person, firm, or corporation furnishing any material or labor for work covered by the Contract shall have any right to a lien upon the premises or any improvement or appurtenance thereon, provided that this shall not preclude the Contractor from installing metering devices or other equipment of utility companies the title of which is commonly retained by the utility company. Nothing contained in this article, however, shall defeat or impair the right of such persons furnishing materials or labor under any bond given by the Contractor for their protection, or any right under any law permitting such persons to look to funds due the Contractor, which are in the hands of the Owner.
4-1.2 Clayton Act. In submitting a bid to the City, if the bid is accepted the Contractor agrees it will assign to the City all causes of action it may have under Section 4 of the Clayton Act (15 U.S.C.
Section 15) or under the Cartwright Act (chapter 2 [commencing with Se ction 16700] of Part 2 Division 7 of the Business and Professionals Code), arising from purchases of goods, materials, or services by the Bidder for sale to the City pursuant to the bid. Such assignment shall be made and become effective at the time the City tenders final payment to the Bidder.
SECTION 5 – LEGAL RELATIONS AND RESPONSIBILITES
5-1.1 CONTRACTOR’S EQUIPMENT AND FACILITIES.
A noise level limit of 86 dbA at a distance of 15 m (50 feet) shall apply to all construction equipment on or related to the work whether owned by the Contractor or not. The use of excessively loud warning signals shall be avoided, except in those cases required for the protection of personnel.
5-1.2 General.
The enclosed toilets required by this section shall be located within an approved yard, if one is acquired by the Contractor. If a yard is not acquired by the Contractor or the project is not within a City owned property, the toilets must be installed on a trailer and removed from the jobsite each day.
At no times shall toilets be stored within the public right of way outside of working hours.
5-3 LABOR. - Amend the following:
Redlands Regular Meeting of 02-06-24
526 of 857
GC 9
5-3.1 General. - Add the following paragraphs:
Employment of apprentices are required on projects of $30,000 or more . Provisions in Sections 1777.5 of the California Labor Code fixes responsibility of compliance with that section for all apprenticeable occupations with the Contractor. Section 1777.5 provides that the Contractor and every Subcontractor shall submit contract award information to the applicable joint apprenticeship committee. One apprentice hour for every five journeymen hours worked is the minimum State requirement applicable to each apprenticeable trade. Section 1777.7 of said Labor Code provides that the Contractor shall forfeit as a civil penalty the sum of one hundred dollars ($100.00) for each calendar day of noncompliance with provision of said Section 1777.5.
The Contractor will observe all applicable health and safety requirements, including, but not limited to the California and Federal Occupational Safety and Health Acts. The Contractor shall submit for review by the City a Site Specific Health and Safety Plan prior to the commencement of construction activities. This Plan shall meet or exceed the requirements of 29 CFR 1910.120.
5-3.2 Prevailing Wages. - Add the following paragraphs:
Contractors are hereby notified that pursuant to Section 1770 of the Labor Code of the State of California, the City Council of the City of Redlands, California, by Resolution No. 2326, has ascertained the general prevailing rate of hourly wages and rates for legal holidays and overtime work in the locality where this work is to be performed, for each craft or type of workman or mechanic needed to execute the Contract which will be awarded to the successful Bidder. The Contractor shall comply with Sections 1770 to 1780 inclusive of the Labor Code and Master Labor Agreement of Southern California.
The Contractor and each of his subcontractors shall pay each of his employees engaged in work on the project under this Contract in full less legally required deductions and also deductions made pursuant to the regulations prescribed under the so-called “Kick- Back Statute” (48 Sta. 948; U.S.C. 875; 40 U.S.C. 276c).
In accordance with Section 1775 of the California Labor code, Contractor shall forfeit to City, as a penalty, a minimum of $40 for each day, or portion thereof, and a maximum of $200 for each day, or portion thereof, for each worker paid, either by Contrac tor, or any subcontractor, less than the prevailing rates as determined by the Director of the California Department of Industrial Relations for the work.
Contractor further agrees to fully comply with all applicable provisions of the California Labor Code including but not limited to Sections 1771, 1775, 1776, 1777.5, 1813 and 1815. Failure to abide by prevailing wages and laws by Contractor will be enforced.
The Contractor or subcontractor shall, as a penalty, to the State or political subdivision on whose behalf the contract is made or awarded forfeit twenty-five ($25) dollars for each worker employed in the execution of the contract by the respective contractor or subcontractor for each calendar day during which the worker is required or permitted to work more than 8 hours in any calendar day and 40 hours in any calendar work in violation of Labor Code section 1813.
5-3.3 Payroll Records. – Delete and replace with the following:
Redlands Regular Meeting of 02-06-24
527 of 857
GC 10
The contractor and subcontractors shall submit electronic certified payroll on a weekly basis to the City of Redlands through LCPtracker. LCPtracker is a web -based labor compliance management system. The Prime Contractor and Subcontractors and lower-tier Subcontractors will receive an email from LCPtracker providing their log-on identification and temporary password. The Contractors will need to follow the instructions in the email to set -up their permanent password and activate their account. Once their account is setup, LCPtracker Inc. provides either computer based or web based training. Training can be accessed via the “Book Now” button located under the “Projects” tab. The prime contractor shall submit their certified payroll, along with any subcontractor who is performing any labor, on a weekly basis. The prime contractor is responsible for all communication with their subcontractors and shall submit their subcontractor’s certified payroll as part of their weekly payroll packet. All labor compliance correspondence and submissions will be made through the LCPtracker software.
All certified payroll shall be submitted no later than 7 days from the close of the pay period. The payroll records shall set out accurately and completely the name, social security number, classification and hourly wage rate of each employee, hours worked by employee during the payroll period and a full weekly wages and the actual weekly wages paid to the employee. Such certified payroll records shall be made available at all time for inspection by the City, the Department of Industrial Relations, the Department of Labor or authorized representatives within ten days of request. The contractor and subcontractor shall preserve weekly payroll records for a period of three (3) years from the date of completion of the Contract. In case on noncompliance with said Section 1776 and after a ten-day period following receipt of written notice, the Contractor shall forfeit to the California Department of Industrial Relations one hundred dollars ($100.00) for each calendar day or portion thereof, for each worker in non-compliance, until compliance is effectuated.
In order to meet labor compliance requirements, all contractors will be required to complete eDocuments which are accessed, submitted and approved through LCPtracker. All eDocuments are required to be signed by an owner/officer or authorized signer. The Pr ime Contractor and each Subcontractor and every lower-tier Subcontractor and any Vendors subject to this provision shall comply with Title 8, Section 16404 of the California Code of Regulations.
A Fringe Benefit Statement shall be submitted with the first payroll and is required for both the prime contractor and any subcontractors. A new Fringe Benefit Statement will be required when general determinations are issued in February and August. Please refer to the DIR website for additional details. Any weeks where no work was performed must be represented by the submittal of a Statement of Non-Performance covering the 7 day pay period where no hours were worked on the site. Final payroll on the project should state “Final” on the certified payroll, and must be marked as such in the LCPtracker system.
Failure by the Contractor to comply with the aforementioned requirements shall result in withheld progress payments until such time certified payroll documents have been received, reviewed, and accepted by the City. The City reserves the right to seek ass istance from the State Department of Industrial Relations in determining the acceptability of certified payroll submittals before release of withheld progress payments. Prior to the release of retention monies, all certified payroll must be submitted on the project and any outstanding issues that may have occurred throughout the project must be resolved.
Redlands Regular Meeting of 02-06-24
528 of 857
GC 11
5-4 INSURANCE. - Delete Section 5-4.1, Section 5-4.2 and replace with the following:
Before entering into a Contract, the Bidder to whom the Contract has been awarded shall furnish satisfactory evidence that they have secured all required insurance from a responsible insurance company authorized to do business in California and satisfactory to the City, and such insurance shall be maintained in full force and effect at the Contractor's own expense during the life of the Contract.
Contractor shall furnish the City with the customary Certificates of Insurance for all required insurance listed below. General Liability Insurance shall name the City and the Consultant, as an additional insured and shall be primary and non -contributing to any insurance or self -insurance maintained by the City. All liability insurance policies shall bear an endo rsement or shall have attached a rider whereby it is provided that, in the event of expiration or proposed cancellation of such policies for any reason whatsoever, the City shall be notified by registered mail, return receipt requested, giving sufficient time before the date thereof to comply with any applicable law or statute, but in no event less than forty five (45) days before expiration or cancellation is effective.
The coverage shall provide the following minimum limits based on the type of work proposed under this Contract. The Contractor shall determine if the proposed work requires Tier 1 or Tier 2 Designated Insurance Requirements shown below.
TIER 1 DESIGNATED INSURANCE REQUIREMENTS
a. Commercial General Liability
➢ $1 Million Per Occurrence/ $2 Million Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
CONTRACTED OPERATIONS DESIGNATED AS TIER 1
Air Conditioning (HVAC)
Systems (installation)
Electric Light or Power Line
Construction Pipeline Construction
Airport Runways (paving,
repaving, etc.) Elevator Work Roofing
Blasting Operations Excavation Sandblasting
Bridge or Elevated Highway
Construction
Fire Suppression Systems
(installation)
Sewer and Water Main
Construction
Buildings Structural Work
(including elevators)
Gas Mains or Connections
Construction Sign Erection (streets)
Building Structure (raising or
moving) Geophysical Exploration Solar Energy
Cable Installation in Conduits and
Conduit Construction (streets) Grading of Land Street Cleaning Caisson or Cofferdam Work Hazardous Materials Contractors Street or Road Construction Dam or Reservoir Construction Irrigation or Drainage
Construction
Tank Construction, Installation,
Erection or Repair
Demolition (structures) Landscape Construction (street or street medians)
Telephone or Cable Line
Construction
Drilling Painting (exterior greater than
single story)
Tree Pruning, Dusting, Spraying
or Removal
Redlands Regular Meeting of 02-06-24
529 of 857
GC 12
▪ If scope of work is within 50 feet of any railroad, endorsement citing inclusion of liability associated with this work is required
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
b. Business Auto Liability
➢ $1 Million Combined Single Limit
▪ City listed as an Additional Insured on the coverage
▪ Must include liability arising from all owned, leased, hired, and non-owned autos ▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission ➢ If Contractor or its subcontractors or suppliers haul hazardous material (including, without limitation, waste), Auto Liability insurance must be applicable to all hazardous waste hauling vehicles, and include MCS 90 and CA9948 Endorsements.
c. Commercial Umbrella/ Excess Liability
➢ $5 Million Per Occurrence/ Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
d. Workers Compensation
➢ $1 Million Per Occurrence for Bodily Injury by Accident ➢ $1 Million Each Employee for Bodily Injury by Disease ➢ $1 Million Policy Limit for Bodily Injury by Accident ▪ Waiver of Subrogation in favor of City
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
e. Pollution Policy (Hazardous Materials) [If Applicable] ➢ Required of Projects that involve Demolition and/or Excavation Activities ➢ $1 Million Per Occurrence/ $2 Million Aggregate
➢ City listed as an Additional Insured on the coverage
CONTRACTED OPERATIONS DESIGNATED AS TIER 2
Air Conditioning (HVAC) Systems
(service and repair) Carpentry (building interiors) Fire Suppression Systems (service and repair)
Alarms and Alarm Systems Communications Equipment
Installation (interior) Landscape Construction
Building Interior Work (service,
repair and non-structural
remodeling)
Driveway, Parking Area or
Sidewalk (paving or repaving) Painting (exterior)
Cable Installation in Conduits
(buildings) Fence Erection All Other Job Types including Vendors
Redlands Regular Meeting of 02-06-24
530 of 857
GC 13
TIER 2 DESIGNATED INSURANCE REQUIREMENTS
a. Commercial General Liability
➢ $1 Million Per Occurrence/ $2 Million Aggregate
▪ City listed as an Additional Insured on the coverage
▪ Coverage is primary and non-contributory
▪ If scope of work is within 50 feet of any railroad, endorsement citing inclusion of liability associated with this work is required
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
b. Business Auto Liability
➢ $1 Million Combined Single Limit
▪ City listed as an Additional Insured on the coverage
▪ Must include liability arising from all owned, leased, hired, and non-owned autos ▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission ➢ If Contractor or its subcontractors or suppliers haul hazardous material (including, without limitation, waste), Auto Liability insurance must be applicable to all hazardous waste hauling vehicles, and include MCS 90 and CA9948 Endorsements.
c. Workers Compensation
➢ $1 Million Per Occurrence for Bodily Injury by Accident ➢ $1 Million Each Employee for Bodily Injury by Disease ➢ $1 Million Policy Limit for Bodily Injury by Accident ▪ Waiver of Subrogation in favor of City
▪ If any policy forms of endorsements are cited to grant extension of coverage, they must be included with the Certificate of Insurance submission
d. Pollution Policy (Hazardous Materials) [If Applicable] ➢ Required of Projects that involve Demolition and/or Excavation Activities ➢ $1 Million Per Occurrence/ $2 Million Aggregate
➢ City listed as an Additional Insured on the coverage
Contractor expressly waives all rights to subrogation against the City, its officers, employees and volunteers for losses arising from work performed by Contractor for City by expressly waiving Contractor’s immunity for injuries to Contractor’s employees a nd agrees that the obligation to indemnify, defend and hold harmless provided for in this Agreement extend to any claim brought by or on behalf of any employee of Contractor. This waiver is mutually negotiated by the parties. This shall not apply to any damage resulting from the sole negligence of City, its agents and employees.
To the extent any of the damages referenced herein were caused by or resulted from the concurrent negligence of City, its agents or employees, the obligations provided herein to indemnify, defend and hold harmless are valid and enforceable only to the extent of the negligence of contractor, its officers, agents and employees.
Redlands Regular Meeting of 02-06-24
531 of 857
GC 14
Subcontractors. The prime contractor shall include all subcontractors as insureds under its policies or shall furnish separate certificates and endorsements from each subcontractor.
The Contractor shall not assign or sublet the contract, in whole or in part, without the written consent of the City, nor shall the contractor assign any monies due to, or to become due to, Contractor hereunder without prior written consent of the City.
The Contractor shall be fully responsible to the City for the acts and omissions of the subcontractor and persons either directly or indirectly employed by the Contractor. Consent to subcontracting part of the work shall, in no way, release the Contractor from responsibility for performance of the work, and Contractor will be held, in all respects, accountable for the same as if no consent had been given.
The Contractor shall give personal attention to this work which is sublet. Nothing contained in the contract documents shall create any contractual relation between any subcontractor and the City.
Hold Harmless and Indemnification. Contractor shall indemnify, hold harmless and defend City and its elected officials, agents and employees and the Consultant from and against any and all claims, losses or liability, including attorney’s fees, arising from injury or death to persons or d amage to property occasioned by any act, omission or failure to act of Contractor, its subcontractors, and any officers, agents and employees in performing the work required by this Agreement. Contractor’s obligations under this provision shall not be limited in any way by any terms of this Agreement, or the insurance limits.
5-4.3 Worker’s Compensation Insurance. - Delete and replace with the following:
A. Contractor shall have worker’s compensation and employer’s liability insurance in force throughout the duration of the contract in an amount which meets the statutory requirement with an insurance carrier acceptable to the City. The insurance policy shall include a provision prohibiting cancellation of said policy except upon forty-five (45) days prior written notice to City. Certificates of Insurance shall be delivered to the City at the time of the Contractors’ execution of the agreement.
B. Contractor expressly waives all rights to subrogation against the City, its officers, employees and volunteers for losses arising from work performed by Contractor for City by expressly waiving Contractor’s immunity for injuries to Contractor’s employee s and agrees that the obligation to indemnify, defend and hold harmless provided for in this Agreement extend to any claim brought by or on behalf of any employee of Contractor. This waiver is mutually negotiated by the parties. This shall not apply to any damage resulting from the sole negligence of City, its agents and employees. To the extent any of the damages referenced herein were caused by or resulted from the concurrent negligence of City, its agents or employees, the obligations provided herein to indemnify, defend and hold harmless are valid and enforceable only to the extent of the negligence of contractor, its officers, agents and employees.
5-6 PATENT FEES OR ROYALTIES. Delete and replace with the following:
The Contractor shall include in its Bid the patent fees or royalties on any patented article or process which may be furnished or used in the Work. The Contractor shall indemnify and hold the City Redlands Regular Meeting of 02-06-24
532 of 857
GC 15
harmless from any legal action that may be brought for infringement of patents. The Contractor’s attention is directed to “Notice of Patents, Data, and Copyright Regulations” of the Federal Labor Standards.
The Contractor shall bear all costs arising from the use of patented goods and/or processes used on and/or incorporated into the Work. When use of these goods and/or processes is judged to be an infringement and the use is banned, the Contractor, at its own expense, shall, with concurrence of the Engineer, do one of the following:
A. Secure for the City the right to continue using goods and/or processes by suspension of the injunction or by procuring a license(s);
B. Replace said goods and/or processes with non-infringing goods and/or processes;
C. Modify said goods and/or processes so that they become non-infringing; or
D. Remove said goods and/or processes and refund the sum paid therefore without prejudice to any other rights of the City.
The preceding shall not apply to any goods manufactured to the detailed design of the City contained in the Contract Documents.
5-7 SAFETY.
5-7.1 Work Site Safety.
5-7.1.1 General. - Amend the following:
Add the following sentences to paragraph 1:
Should watering be the sole method utilized for roadway dust abatement purposes, the maximum time interval that shall elapse between applications thereof shall be no greater than 3 hours during normal working day, supplemented by an additional application thereof immediately prior to the conclusion of the workday and at such other times as may be required, including evenings, weekends and holidays as required by the Engineer. Should the Contractor be unable to furnish dust abatement as specified, the City may perform or cause to be performed the necessary service, the expense of which will be deducted from the payment due the Contractor.
Add the following paragraphs:
To insure the protection of storm drain inlets, Best Management Practices (BMPs) shall be employed during cleanup and dust control operations. Refer to Section 7-8.6.
Compliance with this section is of extreme importance to the City and its citizens. The City may fine the Contractor $1,000 per incident if there are issues with dust, mud, unused equipment or materials and rubbish within the construction area that result in citizen complaints. A 24 hour notice shall be issued to the Contractor and failure to correct the problems will result in the fine being levied. This fine will be in addition to those fines potentially charged for NPDES violations.
Redlands Regular Meeting of 02-06-24
533 of 857
GC 16
5-8 AIR POLLUTION CONTROL.
Dust control shall be performed in accordance with Subsection 7-8 of the Standard Specifications, South Coast Air Quality Management District (SCAQMD) Rule 403, the general Provisions and the following Provision.
Dust resulting from the Contractor’s performance of the work, either inside or outside, the right-of- way shall be controlled by the Contractor. Dust control includes the action necessary to prevent, reduce or control dust within the work area as required to complete the work. The Contractor shall carry out proper and efficient measures to prevent his operations from producing dust in amounts damaging to property or causing a nuisance, or harm to persons living nearby or occupying buildings in the vicinity of the work. The Contractor shall control dust 24 hours a day, seven days a week. The methods to be used for controlling dust in the construction area and along haul roads shall be approved by the Engineer prior to starting any work. The Rule 403 Implementation Handbook published by the SCAQMD, contains a detailed listing of reasonably available dust control measures.
Dust control ordered by the Engineer to be applied on Saturdays, Sundays or holidays will be included in the Contract price for dust control and no additional compensation will be allowed therefore.
The full compensation for all direct and indirect costs incurred for work performed or materials used to control dust resulting from the Contractor’s performance of the work and caused by public traffic, either inside or outside the right-of-way shall be considered as included in the Contract prices paid for the various items of work involved and no additional compensation will be allowed therefore.
5-9 STORAGE OF EQUIPMENT AND MATERIALS.
The Contractor shall be required to provide and maintain as necessary, any additional property required for storage of equipment, materials, etc., to perform work on this project. Should the additional property be located within the city limits of the City of Redlands, the Contractor shall obtain written approval from the City of Redlands Development Services Department and comply with all conditions set therein prior to use. When private property is used for a yard area, the Contractor shall also secure written authorization from the private property owner and supply a copy of such to the City before any monthly progress payment is submitted. Contractor to propose designated areas of the project site, upon approval by the Engineer, suitable for material delivery, storage, and waste collection.
The Contractor shall ensure the construction yard adheres to all local, State and Federal regulations, ordinances, codes and maintained in a neat and orderly manner throughout the duration of the project.
The contractor shall include the construction yard in the Erosion Control Plan or SWPPP and shall be inspected and approved prior to use of the yard. If at any time during the project the location of the construction yard changes from the approved site, the City shall be notified prior to relocation for inspection and approval. Should the Contractor fail to comply with these conditions, the Engineer may suspend the work per SSPWC section 6-3 until the condition is corrected.
Redlands Regular Meeting of 02-06-24
534 of 857
GC 17
At the end of the project or as required, the Contractor shall: clean up and remove all trash and debris, including all organic trash and debris; clean up and remove all hazardous and biochemical wastes from the property to the satisfaction of the agency ( City, County, State, or Federal) charged with overseeing these items; and provide to the City a written release from the private property owner that they are satisfied with all clean up and removal work.
5-9.1 Storage in Public Streets.
Construction materials and equipment shall not be stored within public streets or right of way without prior approval from the City. In order to seek approval, Contractor shall submit a location map with all equipment or materials identified including size, duration and any BMP’s installed and provide at least 7 days for review by the City.
5-10 WATER POLLUTION CONTROL.
The Contractor shall follow the City's guidelines for Storm Water Pollution Prevention in providing storm water pollution control at the project site, including the implementation of approved Erosion/Sediment Control Plans during construction as well as the implementation of approved Water Quality Management Plans.
Construction activities disturbing 1 acre or more of land shall comply with the State Water Resources Control Board’s NPDES General Construction Storm Water Permit. A copy of the Notice of Intent (NOI) to include the Waste Discharge Identification (WDID) number shall be submitted as part of the Storm Water Pollution Prevention Plan (SWPPP) to the Engineer for review. Call (909) 782- 4130 for NOI/WDID information.
All projects requiring grading shall submit to the City for review and approval an Erosion/Sediment Control Plan and a Grading Plan. Permit(s) will not be issued until plans are approved and may be revoked if work required in these specifications are not complied with.
Construction sites shall be maintained by implementation of BMPs in such manner that pollutants are not discharged from the site to the maximum extent practicable. A few references available to help with selection and implementation of applicable BMPs are:
1. California Storm Water Best Management Practice Handbook, American Public Works Association, March 1993;
2. The Construction Site Best Management Practices Manual, November 2000;
3. Storm Water Pollution Prevention Plan and Water Pollution Control Program Preparation Manual, November 2000;
4. California Regional Water Quality Control Board’s San Francisco Bay Region, Guidelines for Construction Projects; and
5. California Regional Water Quality Control Board’s San Francisco Bay Region, Erosion and Sediment Control Field Manual, July 1999.
All discharges into the storm drain system are prohibited except for potable water, properly treated discharge, and those discharges specifically approved by the Engineer. The following are some of the prohibited discharges:
Redlands Regular Meeting of 02-06-24
535 of 857
GC 18
1. Discharges that could have an impact on human health or the environment, cause or threaten to cause pollution, contamination, or nuisance;
2. Discharges that exceed any applicable water quality standard contained in a statewide Water Quality Control Plan or local Basin Plan; and
3. Discharges containing hazardous substances equal to or in excess of a reportable quantity listed in Federal regulations 40 CFR, Parts 117 and 302.
Materials that can cause or contribute to pollution or a violation of any applicable water quality standard include, but are not limited to: sediments; solid or liquid chemical spills; wastes from paints, stains, sealants, glues, limes, pesticides or herbicides and wood preservatives or solvents; asbestos fibers, paint flakes or stucco fragments; fuels, oils, lubricants or hydraulic, radiator and battery fluids; fertilizers; vehicle and equipment wash water or concrete wash water; concrete, detergent or floatable wastes; wastes from any engine and equipment steam cleaning or chemical degreasing; and chlorinated potable water line flushings.
Unless exempted or authorized by an NPDES permit, all non-storm water discharges require prior approval by the Engineer or the State Water Resources Control Board with Engineer approval.
During construction, temporary storage of such materials as identified above, must occur in a designated area physically separated from potential storm water runoff, with ultimate disposal in accordance with local, state and federal requirements.
De-watering of contaminated groundwater or discharging contaminated soils via surface erosion is prohibited.
Unless indicated otherwise by the Engineer, all projects, regardless of size, shall submit for review and approval, a Water Quality Management Plan (WQMP). The WQMP shall consist of post construction BMPs which shall remain in effect throughout the life of the facility. Refer to WQMP guidelines.
5-11 TEMPORARY LIGHTS, POWER AND WATER.
Any water drawn from a City fire hydrant shall be via a City owned water meter. Said meter may be obtained from the Municipal Utilities & Engineering Department. Contractor is responsible for payment of a $1200 deposit fee. Said meter shall be returned in a condition like received, less normal wear and tear. All meters are loaned subject to the conditions of the Fire Hydrant Construction Meter Water Service Application. Contractor must provide proposed location of meter and notify Customer Service at (909) 798-7516 each time the meter is relocated during construction. Water reasonably used in connection with the construction contract will be provided at no cost to the Contractor. Water use determined to be wasteful or unreasonable will be charged for at the prevailing rate.
5-12 PROTECTION AND RESTORATION OF EXISTING IMPROVEMENTS.
Redlands Regular Meeting of 02-06-24
536 of 857
GC 19
The Contractor shall relocate, re-establish, repair or replace all existing improvements within the work limits or right-of-way which are not designated for removal (e.g., sprinkler systems, curbs, sidewalks, driveways, fences, walls, signs, utility installations, pavement, structures, etc.) which are damaged or removed as a result of its operations.
Relocations, re -establishments, repairs and replacements shall be at least equal to existing improvements and shall match them in finish and dimension.
All costs to the Contractor for protecting, removing, restoring, relocating, repairing, replacing or re- establishing existing improvements shall be included in the Bid.
The Contractor shall be responsible for the maintenance of the streets and roadways to be used by public and local traffic through and adjacent to the construction zone, from the date of "Notice to Proceed" until the date of acceptance of the completed construction improvements.
Street maintenance shall include filling of potholes, grading of subgrade and base, replacing signs, installing interim pavement striping and markers on the project streets and other side streets within the construction zone. Street maintenance shall also include sweeping and washing of streets, adjacent and connected to the construction zone on a weekly, or more frequent schedule, to prevent the accumulation of dust, dirt, gravel or other deleterious materials, all as necessary to maintain the construction roadways and adjacent streets in a safe, clean and drivable condition for use by public and local traffic.
Upon request from the City for information pertaining to a claim against the contractor, contractor shall provide a written/email response, including all requested information, within 14 calendar days of City’s request. If a response with all requested information is not provided to the City within 14 calendar days, a penalty of $500 per calendar day will be assessed to the Contractor by the City.
5-13 PUBLIC CONVENIENCE AND SAFETY.
5-13.1 General.
The Contractor may be allowed to close the roadway, or a portion thereof, to traffic during normal work hours upon approval from the Engineer. During any closure, the Contractor shall allow access for residents, schools, trash service trucks, churches and businesses within the affected portion of roadway, except as required for construction for a reasonable period of time. The Contractor shall notify residents as noted within Section 5-18.
The Contractor shall provide and install barricades, delineators, warning devices and construction signs in accordance with the Work Area Traffic Control Handbook (WATCH) prepared by the Southern California Chapter of the American Public Works Association. During adverse weather or unusual traffic or working conditions additional devices shall be placed as directed by the engineer.
All traffic signs and devices shall conform to the current State of California, Department of Transportation (CALTRANS), "Manual of Warning Signs, Lights, and Devices for Use in Performance of Work upon Highways", unless otherwise approved by the Engineer.
Redlands Regular Meeting of 02-06-24
537 of 857
GC 20
Fences, barriers, lights and signs shall be furnished, erected and maintained as necessary to give an adequate warning to the public at all times that the work is under construction and of dangerous conditions to be encountered as a result thereof, and warning and directional signs shall also be erected and maintained as may be required by the City. Should the Contractor fail to furnish a sufficient number of traffic and/or pedestrian safety devices within three (3) hours after being notified, the Owner will place such necessary items and the Contractor shall be liable to the Owner for providing such devices in accordance with the following provisions:
1. For placing of barricades - $15.00 per barricade for each day or part thereof.
For flashers - $15.00 per flasher for each day or part thereof.
For traffic cones - $7.50 per cone for each day or part thereof.
2. In the event that the services of the Owner are required outside the normal working hours and/or days or items not noted above are furnished by the City, all costs incurred by the City shall be the responsibility of the Contractor.
The Contractor shall relocate, preserve and maintain the visibility of all signs within the project limits which affect the flow of traffic, as directed by the engineer. Any signs that are missing or found damaged shall be replaced immediately by the Contractor at his expense.
The Contractor shall provide and maintain Class II barricades along excavation edges parallel to the flow of traffic at a spacing of twenty-five feet (25'). Class II barricades mounted with flashers shall be installed around work areas in parkways. Class II barricades shall have alternating black and reflectorized white (or yellow) stripes at an angle of 45 degrees. The stripe with shall be four to six inches.
During paving operations barricades may be supplemented with minimum size eighteen-inch (18") high traffic cones and delineators such that spacing between barricades and/or cones or delineators is no greater than twenty-five feet (25"). At all access poin ts such as intersecting streets, alleys and driveways, barricades and/or cones shall be provided at five -foot (5') intervals so as to prevent vehicular access to the paving area. Where access from an intersecting street is prohibited, a "Road Closed" sign shall be provided. "No Left Turn" sign shall be provided wherever required by the Engineer.
Clearances from traffic lanes shall be 5 feet to the edge of any excavation and 2 feet to the face of any curb, pole, barricade, delineator or other vertical obstruction.
A 4 foot wide pedestrian walkway shall be maintained in the parkway area on each side of all streets, unless otherwise authorized by the Engineer. The minimum clearance from: the edge of pedestrian walkways to any traffic l ane shall be 5 feet; the edge of pedestrian walkway s to any work zone shall be 3 feet; and the surface of pedestrian walkways to any over head obstruction shall be 7 feet.
Redlands Regular Meeting of 02-06-24
538 of 857
GC 21
The Contractor shall, at the end of each work day, have backfilled, compacted and placed a temporary drivable roadway surface on all work areas within traveled roadways prior to leaving the job site. Failure to comply to the satisfaction of the Engineer shall result in immediate correction by City forces, and all costs shall be borne by the Contractor.
Traffic control devices shall be marked with the Contractor’s name as appropriate. At no time shall any traffic control devices marked with companies or agencies other than the Contractor or subcontractors, be utilized within the work area.
All said traffic controls and safety devices shall be maintained in clean condition, with any and all graffiti removed by the end of workday on which the graffiti was first reported to the Contractor.
If the traffic control devices are deemed unacceptable by the Engineer due to being damaged, dirty, or marked incorrectly, the Contractor shall replace the traffic control devices immediately. Should the Contractor fail to furnish traffic control devices within three (3) hours after being notified, the Owner will place such necessary items and the Contractor shall be liable to the Owner for providing such devices in accordance with the provisions above.
5-13.1.1 Vehicular Access.
At such times as driveways are inaccessible due to the Contractor's work they shall be blocked by two (2) Class II barricades or one (1) Class II barricades and two (2) delineators. Driveways that are ramped or planked for temporary access shall be provided with a delineator at each side.
5-13.1.2 Signage. The Contractor shall furnish, erect and maintain all construction traffic signage as required and specified.
All construction traffic signage shall be in place prior to commencing any work, placed as needed during construction, moved as necessary and removed only upon completion of all work.
All construction traffic signage and controls shall comply with the State of California Manual of Traffic Controls, Warning Signs, Lights and Devices for use in Performance of Work Upon Highways. All construction traffic signage used in the performance of the work shall be a minimum of the encapsulated lens (high intensity) type. All traffic controls and safety devices, equipment and materials, including but not limited to cones, channelizers, del ineators, flashing warning lights, barricades, high level warning devices, telescoping flag trees, flags, signs, markers, portable barriers, flashing arrow signs, changeable message signs, markings and flagging equipment shall be provided and maintained in like new condition.
When a Traffic Signal is constructed as a part of the project, the Contractor shall place and maintain for one calendar month, a message board for each approach leg to a new traffic signal. The message board shall read “CAUTION - NEW TRAFFIC SIGNAL”. The one month period shall begin from the day of activation. This requirement may be lessened or waived, on a case-by-case basis, by the Engineer.
The Contractor shall furnish and properly install, construct, erect, use and continuously inspect and maintain, twenty-four (24) hours per day, seven (7) days per week, including holidays, all said Redlands Regular Meeting of 02-06-24
539 of 857
GC 22
devices, equipment and materials and all temporary and permanent pedestrian and driving surfaces as necessary to provide for the safety and convenience of, and to properly warn, guide, control, regulate, channelize and protect the vehicular traffic, pedest rian traffic, project workers, and the public throughout the entire limits of the work activity and beyond said limits as necessary to include areas affecting or affected by the work, from the date of notice to proceed to the completion and acceptance of t he work. Any corrective work required to be performed by City forces shall be charged to the Contractor and paid in full before release of any bonds on the project.
All traffic cone s shall be no less than 28 inches in height, exc ept that shorter cones, 12 inches minimum height, may be permitted during striping maintenance operations where the only function of the cone is to separate traffic from the wet paint. All barricades used to delineate traffic at night or placed in or adjacent to the traveled roa dway at night, shall be equipped with flashing warning lights.
Channelizers shall be required when lane restrictions, detours or other work conditions need to be maintained for periods longer than normal work hours. Channelizers shall be surface -mounted type and shall be furnished, placed and maintained at the locati ons shown on the plans or as approved by the Engineer and shall conform to these specifications. Channelizers shall be, at the Contractor’s option, one of the following types, or approved equal: (1) Safe -Hit SH236SMA; (2) Repo “The Replaceable Post”; or (3) Carsonite, “Super Duck” SDF-436.SDF-436.
5-13.2 Traffic Control Plan
The Contractor shall provide a Traffic Control Plan to the agency for approval prior to the scheduled commencement of work. Comments and corrections shall be returned to the Contractor within five (5) working days.
The Contractor shall be required to maintain one lane in each direction when working on the roadway.
Access to schools, businesses, etc. shall be maintained as necessary for their operations. If closures are authorized by the Engineer, all detour signage shall be installed prior to closure of specified portion of roadway(s), and shall be maintained during closure.
The Contractor shall make provision to allow pedestrians full access across work areas at existing crosswalks, while working within those areas.
Traffic controls, including but not limited to vehicular and pedestrian traffic controls, maintenance of vehicular and pedestrian access, detours, and street closures shall be in accordance with Subsection 7-1, of the current edition of the "Standard Specifications for Public Works Construction," including all its subsequent amendments, and the current edition of the "Work Area Traffic Control Handbook."
Traffic control and the Traffic Control Plan shall conform to the following:
a. All major streets shall remain open to through-traffic at all times, residential street will be closed to traffic only as long as it takes for material application and drying time.
b. The Traffic Control Plan shall indicate the traffic control requirements for the different types of work to be performed. The Contractor shall be Redlands Regular Meeting of 02-06-24
540 of 857
GC 23
responsible for the preparation of Plans as necessary for specific items of work. These Plans shall be approved by the City's Engineer.
c. All traffic controls and safety devices, equipment and materials, including but not limited to cones, delineators, flashing warning lights, barricades, high level warning devices (flag trees), flags, signs, markers, portable barriers, flashing arrow sig ns, markings, and flagging equipment shall be provided and maintained in "like new" condition.
d. The Contractor shall furnish and properly install, construct, erect, use, and continuously inspect and maintain, twenty -four (24) hours per day, seven (7) days per week, all said devices, equipment and materials and all temporary and permanent pedestrian and driving surfaces as necessary to provide for the safety and convenience of, and to properly warn, guide, control, regulate, channelize and protect the vehicular traffic, pedestrian traffic, project workers, and the public throughout the entire limits of the work activity and beyond said limits as necess ary to include area affecting or affected by the work, from the start of work to the completion of the work.
In the event the slurry and cape seal ravels, a "loose gravel" (C6) sign shall be placed to adequately warn the public.
e. High-level warning devices (flag trees) are required at all times for any work being performed within the roadway unless otherwise specifically authorized by the City's Engineer.
f. All barricades shall be equipped with flashing warning lights, and all traffic cones shall be no less than twenty -eight inches (28") in height, except that shorter cones, twelve inches (12") high or higher, may be used during striping maintenance operations where the only function of the cones is to protect the wet paint from the traffic.
g. Type III barricades, no less than six feet (6') in length and equipped with two (2) Type "N" markers each and two (2) flashing warning lights each, shall be used to close streets, except as otherwise specifically authorized in advance by the City's Engineer for minor maintenance work of no more than one (1) working days duration on weekdays, or on holidays only, and between 8:00 a.m. and 3:30 p.m. only. Said barricades shall be placed across the full roadway at each point of closure with the distance be tween barricades or between barricades and curbs, not exceeding three feet (3'), except that one (1) eleven -foot (11')-wide gap between barricades shall be provided at the center of the street. Barricades to the right of the street's center, facing the inbound vehicular traffic, shall also be equipped with one (1) Type C2 "Road Closed" sign each or one (1) Type C3A "Road Closed to Thru Traffic" sign each.
Redlands Regular Meeting of 02-06-24
541 of 857
GC 24
h. Except for residential streets, as otherwise directed and/or authorized by the City's Engineer, two-way vehicular traffic shall be maintained at all times within two (2) eleven foot (11') -wide lanes on streets, having an effective roadway width of forty-four feet (44') or more with restricted parking, and other streets of lesser widths may be reduced to one (1) twelve -foot (12') wide lane with work activity being limited to one side at a time, and with one-way vehicular traffic being maintained at all ti mes by properly trained and experienced flaggers.
No reduction of the traveled way width shall be permitted on any City street before 8:00 a.m. nor after 3:30 p.m., on weekends or holidays, or when active work is not being done, unless prior authorization to do so is granted by the City's Engineer.
Arrow boards shall be required for all lane closures on major streets.
i. Properly trained and experienced flaggers shall be provided to traffic when said traffic is to be interrupted, when two -way traffic is to be reduced to one-way traffic, and at such other times as is necessary to safely pass the traffic through or around the work area, and when so directed by the City's Engineer.
j. Vehicular access to occupied residential property may be restricted on weekdays other than holidays between the hours of 8:00 a.m. to 3:30 p.m. while essential work activity is taking place, with specific prior written approval from the City's Engineer, providing the Contractor gives the owner and/or resident at least forty -eight (48) -hour advance written and oral notice. See Part 2, "Notification of Residents," herein.
Convenient and safe pedestrian access to occupied residential property shall be maintained at all times. Access to mailboxes must be maintained at all time, such that the postal delivery service is not interrupted.
Access to vacant and unused property may be restricted at the Engineer's discretion. Both vehicular and pedestrian access shall be maintained at all times to all other property except as otherwise specifically authorized in writing by the City's Engineer.
k. Any traffic control and safety devices and equipment being used which becomes damaged, destroyed, faded, soiled, misplaced, worn out, inoperative, lost, or stolen shall be promptly repaired refurbished and/or replaced, and any traffic control and safety devices and equipment being used which are displaced or not in an upright position from any cause, shall be promptly returned or restored to their proper position.
Redlands Regular Meeting of 02-06-24
542 of 857
GC 25
l. An unobstructed view of all signs and warning devices including but not limited to stop signs, stop ahead signs, street names signs, and other regulatory, warning and construction signs, markers, and warning devices shall be maintained at all times. No trucks or other equipment or materials shall be stopped, parked, or otherwise placed so as to obscure said signs, markers, and devices from the view of vehicular and/or pedestrian traffic to which it applies.
m. When entering or leaving roadways carrying public traffic, the Contractor's equipment, whether empty or loaded, shall yield to said public traffic at all times, except where the traffic is being controlled by police officers, fire officers, properly trained and experienced flaggers, or at traffic signalized intersections.
n. Stockpiling and/or storage of materials on any public right -of-way or parking areas will not be allowed without specific permission of the Engineer. Materials spilled along or on said right -of-way or parking areas shall be removed completely and prompt ly. All stockpile and/or storage areas shall be kept in a safe, neat, clean, and orderly fashion, and shall be restored to equal or better than original condition upon completion of the work.
o. Where vehicular access to abutting property must be restricted, the work shall be so selected, arranged, and scheduled that the person(s) requiring access to said abutting property and/or residents along said streets affected will be able to park within a reasonable distance of not more than five hundred feet (500') from their homes and/or destination. Residents must be supplied written notice of such restrictions a minimum of 48 hours in advance.
p. When work has been completed on a particular street or has been suspended or rescheduled, and said street is to be opened to vehicular traffic, all equipment, "NO PARKING" signs, other obstructions, and unnecessary traffic control devices and equipment shall be promptly removed from that street except as otherwise authorized or directed by the City's Engineer.
q. Should the Contractor be neglectful, negligent, or refuse, fail, or otherwise be unavailable to promptly, satisfactorily, and fully comply with the provisions specified and referred to hereinabove, the City reserves the right to correct and/or mitigate any situation, which in the sole opinion of the City's Engineer constitutes a serious deficiency and/or serious case of noncompliance, by any means at its disposal at the Contractor's and/or permittee's expense, and will deduct the cost therefore from the Contractor's progress and/or final payment. Such corrective action taken by the City shall not reduce or abrogate the Contractor's legal obligations and liability for proper traffic control and safety measures, and shall not serve to transfer Redlands Regular Meeting of 02-06-24
543 of 857
GC 26
said obligations and liabilities from the Contractor to the City or the City's agents.
r. Violations of any of the above Provisions and/or Provisions of the referenced publications, unless promptly and completely corrected to the satisfaction of the City's Engineer, shall at the sole discretion of the City, be grounds for termination of the Con tract, or shut down or partial shutdown of the work, without compensation to the Contractor and/or permittee, or liability to the City, all as prescribed by Contractual obligation or State law, whichever is applicable.
Full compensation for furnishing all labor, materials, tools, equipment, flaggers, lights, channelizers (surface mounted), temporary striping, barricades, portable flashing lights, flashing arrow signs, traffic control and detour plan, and incidentals required to comply with the provisions specified and referred to herein above, to provide all required traffic and pedestrian control for the duration of this contract, all as shown and as specified, shall be paid as specified in Section 01200 of the General Requirements and no other compensation shall be made therefore.
5-13.3 Edison Energized Conductors. The Contractor hereby promises and agrees that in the performance of the Work, he will employ and utilize only qualified persons, as hereinafter defined, to work in proximity to Edison's secondary, primary and transmission facilities. The term "qualified person" is defined as follows:
"Qualified Person". A person by reason of experience or instruction is familiar with the operation to be performed and hazards involved.
Contractor further promises and agrees that the provisions of this paragraph shall be and are binding upon any Subcontractor or Subcontractors that may be retained by it, and that the Contractor shall take such steps as are necessary to insure compliance by said Subcontractor or Subcontractors with the requirements of this paragraph.
5-14 CONTRACTOR’S RESPONSIBILITY FOR DAMAGE.
5-14.1 Responsibility for Damage. The Contractor agrees to and does hereby indemnify, defend and hold harmless the City, its elected officials and the Consultant and their officers, agents and employees from every claim or demand made, and every liability, loss, damage, or expense of any nature whatsoever, including attorney's fees and costs, which may be incurred by reason of:
(a) Liability for damages for (1) death or bodily injury to persons, (2) injury to loss or theft of property, (3) any other loss, damage or expense arising under either (1) or (2) above, sustained by the Contractor or any person, firm or corporation employed by the contractor upon or in connection with the work called for in this agreement, except for the liability resulting from the sole negligence or willful misconduct of the City, its elected officials and their officers, employees and agents who are directly employed by the City and the Consultant; and
Redlands Regular Meeting of 02-06-24
544 of 857
GC 27
(b) any injury to or death of persons or damage to property caused by any fault, neglect, default or omission of the Contractor, or any person, firm or corporation employed by the Contractor, either directly or by independent contract, including all damages due to loss or theft, sustained by any person, firm or corporation, including the City, arising out of, or in any way connected with the work covered by this agreement, whether said injury or damage occurs either on or off City property, provided that any of the foregoing (1) is attributable to personal injury, bodily injury, sickness, disease or death, or to injury to or destruction of tangible property (other than the work itself), including the loss of use resulting there from, and (2) is caused in whole or in part by any act or omission of the Contractor, any subcontractor, any supplier, anyone directly or indirectly employed by any of them or anyone for whose act or omissions any of them may be liable, regardless of whether or not caused in part by any act or omission (active, passive, or comparative negligence included, excepting the active negligence of the District) of a party indemnified hereunder.
(c) The Contractor, at its own expense, cost, and risk shall defend any and all actions, suits or other proceedings that may be brought or instituted against the City, its elected officials, officers, agents and employees and the Consultant, against any su ch claim, demand or liability, and shall pay or satisfy any judgment that may be rendered against the City, its elected officials, officers, agents or employees, in any such action, suit or other proceedings as a result thereof.
5-15 NO PERSONAL LIABILITY. Neither the City Council, the Engineer, the Consultant, nor any other officer or authorized assistant or agent shall be personally responsible for any liability arising under the contract.
5-16 CONTRACTOR'S RESPONSIBILITY FOR WORK. Except as provided above, until the formal acceptance of the Work by the City, the Contractor shall have the charge and care thereof and shall bear the risk of injury or damage to any part thereof by the action of the elements or from any other cause, wh ether arising from the execution or from the non -execution of the Work. The Contractor shall rebuild, repair, restore, and make good all injuries or damages to any portion of the work occasioned by any of the abov e causes before final acceptance and shall bear the expense thereof, except such injuries or damages occasioned by act of the federal government or the public enemy.
The City of Redlands shall not be held responsible for the care or protection of any material or parts of the work prior to final acceptance, except as expressly provided in these specifications.
The City shall not be responsible for security of the Contractors equipment or materials at the site.
The City will not be responsible for theft or damage to any property or materials of the Contractor.
Security for Contractor’s property shall be the responsibility of the Contractor.
5-17 WARRANTY OF WORK. The Contractor shall guarantee the Work against defective materials or workmanship for a period of (1) year from the date of completion date specified in the Notice of Completion, except where longer warranty periods are specifically stated. As specified in Section 2-4 in the GENERAL CONDITIONS, the Performance Bond shall remain in full force and effect during the warranty period.
Redlands Regular Meeting of 02-06-24
545 of 857
GC 28
All work which has been rejected, shall be remedied, or removed and replaced, by the Contractor at his own expense, with work conforming to the Plans and Specifications. Any defective material or workmanship which may be discovered before final acceptance or within (1) one year from the completion date specified in the Notice of Completion shall be corrected immediately by the Contractor at his own expense notwithstanding that it may have been overlooked in previous inspections and estimates. Failure to inspect work at any stage shall not relieve the Contractor from any obligation to perform sound and reliable work as herein described. It is the Contractor's ultimate responsibility to deliver at the time of final acceptance a complete project that complies in all details with these Contract Documents. All items shall be ready to operate.
Any omission or failure on the part of the Owner to discover or notify the Contractor of or to condemn defective work or material at the time of construction shall not be deemed an acceptance, and the Contractor will be required to correct defective work or material prior to final acceptance.
The Owner will endeavor to locate any errors or defective materials or workmanship and call them to the attention of the Contractor prior to subsequent work being performed. However, the Owner is under no obligation to do so and shall not be held liable b ecause errors or defective material or workmanship by the Contractor are not discovered prior to subsequent work.
During the (1) one year warranty period, should the Contractor fail to remedy defective material and/or workmanship, or to make replacements within five (5) days after written notice by the Owner, it is agreed that the Owner may make such repairs and replacement and the actual cost of the required labor and materials shall be chargeable to and payable by the Contractor or his Surety.
Nothing in this section shall be construed to limit the rights of the Owner to immediately correct conditions which may be unsafe or which may pose a public health nuisance. Should said conditions later be found to be caused by defective material and/or workmanship, the Contractor and his Surety shall reimburse the Owner for costs reasonably incurred while attending the situation.
In the event it is necessary for the Owner to file suit to enforce any liability of the Contractor pursuant to this sections WARRANTY OF WORK, the Owner shall be entitled to recover from the Contractor, in addition to all other amounts found due and owing, costs of suit and reasonable expenses and fees, including reasonable attorneys' fees, incurred by the Owner in successfully enforcing the Contractor's obligations, all to be taxed as costs and included in any judgment rendered.
The warranty provided herein shall not be in lieu of, but shall be in addition to any warranties or other obligations otherwise imposed by the Contract Document or by law. The remedies provided herein shall not be exclusive and the Owner shall be entitled to any and all remedies provided by law.
5-18 NOTIFICATION OF RESIDENTS/BUSINESSES . The Contractor shall notify all residents, firms, institutions, agencies, and utility companies which may be affected by the work.
Notification shall be by hand delivery of an approved notice within the project limits approved by the City. The notification process shall consist of two notifications, one prior to the start of construction for all properties within the project area and a second notification at least seven days in advance of any activity which may impact each specific property. In the event of any work within the downtown Redlands Regular Meeting of 02-06-24
546 of 857
GC 29
area, the distribution of the second notification shall be at least fourteen days in advance of any activity. Activities impacting said properties and, therefore, requiring the above said notices include the following: the work itself; closure or partial closure of the street ; and disallowance of street parking and disallowance of vehicular ingress to or egress from the property.
Said firms, institutions, agencies, and utility companies which must be notified of proposed work shall include, but are not limited to the following: public schools, private schools, day care centers, postal service, hospitals, governmental services, police department, fire department, ambulance services, Omnitrans, solid waste collection, and City street sweeping.
The proposed notice shall be submitted to the Engineer at least seven calendar days prior to the date of distribution for review and approval. The submittal shall also include a map identifying the limits of the work and proposed limits of distribution. The printed notices shall contain a general description of the work to be done, the name of the street with limits, the day and date of the work and the name and telephone number of the Contractor. The notice shall also include a statement that there will be no disruption of trash collection schedules and that trash should be set out by 6:00 a.m. on the scheduled day of pickup. If on-street parking will be affected the notice shall include a statement that no on-street parking will be allowed between the hours of 7:00 a.m. and 5:00 p.m. on the day of work, and a statement that it will be necessary to tow away parked vehicles at the owner's expense per California Vehicle Code CVC 22651L and CVC 22654D.
The Contractor will provide City with the dates and addresses of when project notifications are delivered to affected properties. City will verify the notification process is completed in compliance with the requirements of the specifications. Work will commence when City approves Contractor’s compliance with the requirements set forth in the specifications.
If on-street parking is affected, the Contractor shall also post pre-approved "NO PARKING-TOW WAY" signs on 1 x 2 wood stakes or barricades at one hundred foot (100’) maximum spacing along the affected areas of the street, 48 hours prior to the start of the work. The "NO PARKING-TOW AWAY" signs shall contain the day, date, and hours that parking will be prohibited on that particular street and a statement that parked vehicles will be towed away at owner's exp ense per California Vehicle Code CVC 22651L and CVC 22654D. The Contractor shall maintain said signs throughout the day of work, and shall start the removal of said signs by 4:00 p.m. and complete the removal by 6:00 p.m. on said day of work or as otherwise directed by the Engineer.
The Contractor shall document the day, date, and time the signs are installed because the no parking restriction cannot be enforced until the signs have been in place 24 hours. Posting of signs on trees, utility poles, light standards and other existing parkway improvement is strictly forbidden.
In the event of street resurfacing operations, the notices to residents shall contain a statement that the street to be resurfaced will be closed to vehicular traffic, and the suggestion that if they require the use of their vehicles on the day of the resurfacing work, they should consider parking their vehicle on a nearby street which is not scheduled for a resurfacing application.
In the event scheduled work is delayed, the Contractor shall immediately remove all "NO PARKING" signs. The contractor must notify all previously notified, in person and with printed notices, that the Redlands Regular Meeting of 02-06-24
547 of 857
GC 30
work will be rescheduled and that they will be re-notified 48 hours in advance. The Contractor shall have an adequate supply of approved notifications for distribution to residents.
Full compensation for conforming to these requirements shall be considered as included in the various Contract items of work involved, and no additional compensation will be allowed therefore.
Failure to comply with this section shall result in a penalty assessment imposed of up to $10,000 per violation at the City’s discretion.
SECTION 6 – PROSECUTION AND PROGRESS OF THE WORK
6-1 CONSTRUCTION SCHEDULE AND COMMENCEMENT OF WORK . - Add the following paragraph:
Contractor shall notify Underground Service Alert (USA) at 1 (800) 227-2600, two working days prior to starting work, and must submit verification number to the City prior to starting work.
6-1.2 Commencement of the Work. - Amend the second sentence as follows:
“The work shall start within 10 days thereafter, and be diligently prosecuted to completion within the Contract Time.”
6-3 TIME OF COMPLETION.
6-3.1 General. - Add the following sentence:
The time of completion of the Contract shall be expressed in consecutive calendar days.
6-4.1 General. - Add the following paragraphs:
If saturated soil is encountered during construction due to leaks in an existing utility, contractor shall remove saturated material and replace with a suitable backfill material until adequate compaction can be attained by verification from the City's Geotechnical Engineer.
Prior to any removal of saturated material, contractor shall discuss the methods of remediation with the City's representative. Approval from the City, or the City's representative, shall be obtained for any amount of saturated material removal in which the contractor anticipates to be compensated for, if approval is not obtained all costs shall be borne by the contractor.
Up to a 14 day delay in paving operations may be requested after all leaks have been resolved to provide time for excess moisture to dissipate, at no additional cost to the city, in lieu of removing and replacing the saturated soil. A no cost change order will be prepared to provide the contractor with additional contract time if such delay is requested by the City.
6-9 LIQUIDATED DAMAGES. The value of liquidated damages noted in this section is amended to five hundred dollars ($500) per calendar day.
6-10 NOTICE AND SERVICE THEREOF. Any notice required or given by one party to the other under the Contract shall be in writing and shall be dated and signed by the party giving such Redlands Regular Meeting of 02-06-24
548 of 857
GC 31
notice or by duly authorized representative of such party. Any such notice shall not be effective for any purpose whatever unless served in the following manner:
Notice shall be given to the Contractor by personal delivery thereof to said Contractor or to his authorized representative at the project site, or by deposing the same in the United States Mail enclosed in a sealed envelope addressed to said Contractor at the address established for the conduct of work under this Contract, certified and with postage prepaid.
Notice shall be given to the Surety, or any other person, by personal delivery to said Surety or other person, or by depositing the same in the United States Mail, enclosed in a sealed envelope addressed to such Surety or persons at the address of said Surety or persons last communicated by him to the party giving the notice, certified and with postage prepaid.
Notice shall be given to the Owner by personal delivery thereof or by depositing the same in the United States Mail enclosed in a sealed envelope, certified and with postage prepaid. The address of record for the owner is:
City of Redlands
Municipal Utilities & Engineering Department
P.O. Box 3005
35 Cajon Street, Suite 15A
Redlands, CA 92373
6-11 PUBLIC RECORDS ACT. All documents, Plans, specifications and all other information relating to the conduct of the City’s business, including information submitted by the Contractor, shall become the exclusive property of the City and except as provided by law shall be deemed public records. Said information shall be subject to the provisions of the California Public Records Act (Government Code Sections 6250 et seq.).
Under no circumstances will the City be responsible or liable to the Contractor, submitter or any other party for the disclosure of any records or information submitted to the City, regardless of whether such records or information are labeled “Trade Secret”, “Confidential”, or “Proprietary” (or words to similar effect) and regardless of whether the disclosure is required by law or a court order or occurs through inadvertence, mistake, or negligence on the part of the City or its officers, employees, and/or Contractors.
The City will not advise as to the nature or content of documents entitled to protection from disclosure under the California Public Records Act, including interpretations of the Act or the definition of “Trade Secret”. The submitting party shall be solely responsible for all determinations made under the Act, and where appropriate for clearly and prominently marking each and every page or sheet of information with “Trade Secret”, “Confidential”, or “Proprietary”. Each submitting party is advised to contact its own legal counsel concerning the California Public Records Act and its applicability to the submitting party’s own circumstances.
In the event of litigation concerning the disclosure of any information submitted by the submitting party, the City’s sole involvement will be as a stakeholder, retaining the information until otherwise Redlands Regular Meeting of 02-06-24
549 of 857
GC 32
ordered by a court. The submitting party, at its sole expense and risk, shall be responsible for any and all fees and costs for prosecuting or defending any action concerning the information, and shall indemnify and hold the City harmless from all costs a nd expenses including attorneys’ fees, in connection with such action.
SECTION 7 - MEASUREMENT AND PAYMENT
7-3 PAYMENT.
7-3.2 Partial and Final Payment. - Delete and replace with the following:
The closure date for the purpose of making monthly progress payments shall be assigned by the Engineer during the pre -construction meeting. Payment, less deductions, unearned work and retention, will be made within 30 days of the closure date. If a dispute exists between the City and the Contractor regarding an item included in the Contractor's Monthly Progress Payment Request, progress payments will be withheld until said dispute is resolved, in which case longer period of time will be required to make such payment. No such payment shall be required to be made, when in the judgment of the Engineer, the total value of the work since the last estimate amounts to less than $500.
If, in the opinion of the Engineer, work is not progressing according to the a pproved schedule, payments may be withheld until the Contractor returns to the approved schedule.
Deductions will be made for: (1) amounts due the Owner for equipment or material furnished or services rendered; (2) amounts due the Owner under the terms of the Contract; (3) amounts of any claims of lien filed with the Owner; (4) accrued amounts of liquidated damages; (5) amounts required to be deducted by Federal, State or local governmental authorities. From the balance thus determined will be deducted the amounts of all previous payments, and the remainder shall constitute the monthly payment due the Contractor.
A retention of five percent (5%) will be withheld from each and every progress payment to the Contractor. This percentage will remain constant throughout the duration of the Contract. The City shall make a progress payment within thirty (30) days after r eceipt of an undisputed and properly submitted payment request from Contractor pursuant to Public Contract Code section 20104.50.
After completion of the work to the satisfaction of the Engineer, the Engineer shall make a final estimate of the amount of work done. The City shall pay the entire sum so found to be due after deducting there from all previous payments and all amounts to be retained under the provisions of the Contract. All prior partial estimates and payments shall be subject to correction in the final estimate and payment. The final payment shall not be due and payable until the expiration of thirty-five (35) days from and after the recordation of the Notice of Completion filed by the City.
As provided by paragraph 22300 of the California Public Contract Code, the Contractor may substitute securities for any monies withheld by the City to ensure performance under the Contract.
Substitute securities shall be deposited in a financial institution in a form acceptable to the City of Redlands. The financial institution shall be located within the City limits of the City of Redlands.
The Escrow Agreement to be used is set forth in Public Contract Code section 22300.
7-3.3 Delivered Materials. - Delete and replace with the following:
Redlands Regular Meeting of 02-06-24
550 of 857
GC 33
No payment will be made for materials or equipment delivered but not yet incorporated in the work.
7-4.2.6 Extras. Without invalidating the Contract, the City may order extra work or make changes by altering, adding or deducting from the work, the Contract sum being adjusted accordingly and the consent of the Surety being first obtained where necessary or desirable. All the Work of the kind bid upon shall be paid for at the price stipulated on the proposal, and no claims for any extra work or material shall be allowed unless the work is ordered in writing by the engineer and the price is stated in such order.
7-4.2.7 Claims for Extra Costs. No claim for extra work or cost shall be allowed unless the same was done in pursuance of a written order by the Engineer, as aforesaid, and the claim presented with the first estimate after the changed or extra work is done. When work is performed under the terms of the General Conditions, the Contractor shall furnish satisfactory bills, payrolls, and vouchers covering all items of cost and when requested by the City, give the City access to accounts relating thereto.
After completion of the work to the satisfaction of the Engineer, the Engineer shall make a final estimate of the amount of work done. The City shall pay the entire sum so found to be due after deducting there from all previous payments and all amounts to be retained under the provisions of the Contract. All prior partial estimates and payments shall be subject to correction in the final estimate and payment. The final payment shall not be due and payable until the expiration of the thirty-five (35) days from and after the recordation of the Notice of Completion filed by the City.
SECTION 8 - FACILITIES FOR AGENCY PERSONNEL
This section is deleted in its entirety.
SECTION 9 - ASSIGNMENT OF UNFAIR BUSINESS PRACTICES
CLAIMS
9-1. In entering into a public works contract or a subcontract to supply goods, services, or materials pursuant to a public works contract, the Contractor or subcontractor offers and agrees to assign to the City all rights, title and interest and to all causes of action it may have under Section 4 of the Clayton Act (15 U.S.C. Sec. 15) or under the Cartwright Act (Chapter 2, commencing with section 16700 of part 2 of division 7 of the Business and Professions Code), arising from the purchase of goods, services, or materials pursuant to this public works agreement. This assignment shall be made and become effective at the time the City tenders final payment to the Contractor, without further acknowledgment by the Parties.
SECTION 10 - TRENCHING AND EXCAVATION
10-1. If this contract involves digging trenches or other excavations that extend deeper than (4) feet below the surface, the following shall be done pursuant to California Public Contract Code Section 7104:
Redlands Regular Meeting of 02-06-24
551 of 857
GC 34
A. That the Contractor shall promptly and before the following conditions are disturbed, notify the City in writing, of any:
(1) Material that the Contractor believes may be material that is hazardous waste, as defined in Section 25117 of the Health and Safety Code, that is required to be removed to a Class I, Class II or Class III disposal site in accordance with provisions of existing law.
(2) Subsurface or latent physical conditions differing from those indicated.
(3) Unknown physical conditions at the site of any unusual nature, different materially from those ordinarily encountered and generally recognized as inherent in work of the character provided for in the contract.
B. That the City shall promptly investigate the conditions, and if it finds that the conditions do materially so differ, or do involve hazardous waste, and cause a decrease or increase in the Contractor’s cost of, or the time required for, performance of any part of work shall issue a change order under the procedures described in the contract.
C. That, in the event that a dispute arises between the City and the Contractor whether the conditions materially differ, or involve hazardous waste, or cause a decrease or increase in the Contractor cost of, or time required for, performance of any part of the work, the Contractor shall not be excused from any scheduled completion date provided for by the contract, but shall proceed with all work to be performed under the contract. The Contractor shall retain any and all rights provided either by contrac t or by law which pertains to the resolution of disputes and protests between the contracting parties.
SECTION 11 - REMOVAL, RELOCATION OR PROTECTION OF
EXISTING UTILITIES
11-1. Pursuant to Government Code Section 4215 et seq, the City shall assume the responsibility between the parties to this contract, for the timely removal, relocation, or protection of existing main or trunk line utility facilities located on the site of the construction project for this contract, if such utilities are not identified by the public agency in the plans and specifications made a part of the invitation for bids.
11-2. The Contractor shall be compensated for the costs of locating, repairing damage not due to the failure of the Contractor to exercise reasonable care, and removing or relocating such utility facilities not identified in the plans and specifications with rea sonable accuracy and for equipment on the project necessarily identified during such work.
11-3. The Contractor shall not be assessed liquidated damages for delay in completion of the project, when such delay was caused by the failure of the City, or the owner of the utility to provide for removal or relocation of such utility facilities.
11.4. The City shall not be required to indicate the presence of existing service laterals or appurtenances whenever the presence of such utilities on the site of the construction project can be Redlands Regular Meeting of 02-06-24
552 of 857
GC 35
inferred from the presence of other visible facilities, such as buildings, meter and junction boxes, on adjacent to the site of construction, provided, however, nothing herein shall relieve the City from identifying main or trunk lines in the plans and specifications.
11.5. Nothing herein shall preclude the City from pursuing appropriate remedy against the utility for delays which are the responsibility of the utility.
11.6. If the Contractor, while performing the contract, discovers utility facilities not identified by the City in the contract plans or specifications, Contractor shall immediately notify the City and the utility in writing.
11.7. The public utility, when it is the owner, shall have the sole discretion to perform repairs or relocation work or permit the Contractor to do such repairs or relocation work at a reasonable price.
11.8. Contractor shall comply with Government Code Section 4216 through 4216.9.
11.9. Conduits from existing street light and traffic signal systems may be encountered during construction of this project. All removals, relocations, and/or replacements of existing conduit systems shall be performed in accordance with these specifications and City standards, by a qualified electrical contractor. All costs for said work shall be borne by the Contractor and paid as a part of the various items of work requiring such removals, reloca tions, and/or replacements, and no other compensation shall be made therefore.
SECTION 200 - ROCK MATERIALS
200-2 UNTREATED BASE MATERIALS.
200-2.1 General. - Amend the first paragraph as follows:
“Materials for use as untreated base or subbase shall be classified in the order of preference as follows:
Crushed Aggregate Base
Crushed Miscellaneous Base
Pulverized Miscellaneous Base.”
200-2.4.1 General. - Delete the second sentence and replace with the following:
“The material shall be free of deleterious material as defined in 200-1.1.”
200-2.4.2 Grading. - Amend the first sentence of paragraph 1 as follows:
“The material shall be uniformly graded and shall conform to the ‘fine’ gradations:”
200-2.5.1 General. - Delete the third sentence and replace with the following:
“The material shall be free of deleterious material as defined in 200-1.1.”
200-2.8.1 General. - Amend as follows:
Delete the second sentence of paragraph 1 and replace with the following:
“Pulverized miscellaneous base may contain underlying base material.” Redlands Regular Meeting of 02-06-24
553 of 857
GC 36
Delete the third sentence of paragraph 1 and replace with the following:
“The material shall be free of deleterious material as defined in 200-1.1.”
SECTION 201 - CONCRETE, MORTAR AND RELATED MATERIALS
201-1 PORTLAND CEMENT CONCRETE.
201-1.1.1 General - Add the following paragraph:
The Contractor shall furnish the Engineer in the field with a copy of the mix design to be used, and with a legible certified weighmaster's certificate for each load of PCC delivered to the project.
PCC delivered to the project site having a water content and/or slump greater than that specified in the mix design, shall be rejected and removed from the project site.
201-1.1.2 Concrete Specified by Class and Alternate Class - Amend Table 201 -1.1.2.(A) as follows:
Street Surface Improvements section -
All concrete in this section shall have a minimum compressive strength at 28 days of 22,410 kPa (3,250 pounds per square inch), and meet the requirements of class 330 -C-23 (560-C-3250) concrete.
Sewer & Storm Drain Facilities section, Sidehill Surface Drainage Facilities subsection - All concrete in this subsection shall have a minimum compressive strength at 28 days of 22,410 kPa (3,250 pounds per square inch), and meet the requirements of class 330 -C-23 (560-C-3250) concrete.
201-1.4.3 Transit Mixers. - Replace the first sentence in paragraph 6 with the following:
The total elapsed time between addition of water at the batch plant and the completion of the discharge of the PCC from the mixer, shall not exceed ninety (90) minutes. All PCC remaining in the mixer, after said ninety (90) minutes time limit, shall be rejected and removed from the project site.
SECTION 203 - BITUMINOUS MATERIALS
203-3 EMULSIFIED ASPHALT.
203-3.1 General. - Modify the section by adding the following:
Asphalt emulsion shall be a QUICKSET ANIONIC OR CATIONIC EMULSIFIED ASPHALT conforming to the requirements of Subsection 203 -1.3, “Test Reports and Certification”, and Subsection 203-1.2, “Testing Requirements” of the Standard Specifications.
The latex additive shall be Ultra Pave 70 (for anionic) or Ultra Pave 65 K (for cationic) or an approved equal. The latex shall be added at the emulsion plant after weighing the asphalt and before the addition of mixing water. The latex shall be added at a rate of two to two-and-one-half (2 to 225) parts to one-hundred (100) parts of emulsion by volume.
Redlands Regular Meeting of 02-06-24
554 of 857
GC 37
203-5 SLURRY SEAL.
203-5.1 General. - Delete the sentence and replace with the following:
Slurry seal shall be emulsion-aggregate slurry (EAS) conforming to 203-5.4.
203-5.2 Mix Design. - Modify the section by adding the following:
(f) Admixtures, such as Portland Cement or aluminum sulfate may be mixed into the slurry material to adjust curing time such that the applied slurry can support vehicular traffic within 60 minutes.
(g) Use of slag shall not be permitted.
(h) Deliveries of aggregate and emulsion shall not be made without the engineer present.
Emulsion is not to be transferred to an on -site storage tanker without the sieve test performed by the City.
203-5.3.2 Grading. - Delete the sentence and replace with the following:
The combined aggregate gradation shall be determined in accordance with ASTM C136 and conform to Type II requirements shown in Table 203-5.3.2 (A).
203-5.4.1 General. – Modify the paragraph and replace with the following:
EAS shall be a stable mixture of emulsified asphalt, aggregate, water, a set control agent, and latex.
EAS shall be Type II-CQS-1h-EAS.
203-5.4.2.1 Aggregate. – Delete the sentence and replace with the following:
Aggregate shall be Type II conforming to 203-5.3.
203-5.4.2.2 Emulsified Asphalt. – Modify the first paragraph and replace with the following:
Emulsified asphalt shall be quick -set, and contain latex. Quick -set emulsified asphalt shall be CQS-1h conforming to 203-3.
203-6 ASPHALT CONCRETE.
203-6.1 General. - Add the following paragraph:
Unless otherwise approved by the Engineer, asphalt concrete for paving shall be C2 -PG 64-10 (1/2”) for finish paving or B-PG 64-10 (3/4”) for base paving. A sphalt concrete for Type D1 or Type D2 curb shall be D2 –PG 70-10.
SECTION 206 - MISCELLANEOUS METAL ITEMS
206-7 TRAFFIC SIGNS.
206-7.1 General. The Contractor shall furnish or relocate and erect all traffic signage as required and specified.
Redlands Regular Meeting of 02-06-24
555 of 857
GC 38
All new traffic signage shall be a minimum of the encapsulated lens (high intensity) type, have an anti-graffiti protective covering and be installed on new posts. All traffic signage to be relocated shall be installed on new posts.
206-7.2 Protective Covering. Anti-graffiti protective covering shall be Type 1150 -POF, manufactured by 3M Company, or approved equal.
206-7.3 Post and Base. New posts and bases shall be Ultimate Sign Support System as manufactured by Western Highway, or approved equal.
SECTION 207 – GRAVITY PIPE
207-2 REINFORCED CONCRETE PIPE (RCP).
207-2.1 General. - Add the following sentences to paragraph 2:
The minimum D-load for any RCP shall be 1,350. The minimum size for RCP shall be 18 inches (457 mm) unless otherwise approved by the Engineer.
SECTION 211 - MATERIAL TESTS
211-1 COMPACTION TESTS.
211-1.4 General. The Contractor shall be responsible for all quality control for all work. The Contractor shall complete all necessary testing to ensure the quality requirements within the specifications are achieved. The Contractor shall conduct the compaction testing by a geotechnical engineering firm and the results of the testing shall be made available to the Engineer.
The City will complete assurance testing throughout the project by an independent testing firm.
The City will perform the first compaction test required at any location. If such test does not meet the required specifications, the City will make additiona l tests until the required compaction is obtained and withhold from the final payment due the Contractor, the cost of all such additional tests. To be acceptable, tests must be ordered and witnessed by the City. Tests will be ordered by the City and performed at a location and depth as directed by the City. The Contractor shall assist the City in performing these tests as necessary. The Contractor shall provide to the City the maximum dry density and the optimum moisture content results of backfill an d bedding material when requested by the City.
SECTION 214 - TRAFFIC STRIPING, CURB AND PAVEMENT
MARKINGS, AND PAVEMENT MARKERS
214-4 PAINT FOR STRIPING AND MARKINGS.
214-4.1 General. - Amend the first sentence in paragraph 4 as follows:
“Glass beads conforming to 214-3 shall be mechanically applied at a rate of 0.6 to 0.8 kg of beads per liter (5 to 7 pounds of beads per gallon).”
Redlands Regular Meeting of 02-06-24
556 of 857
GC 39
SECTION 300 - EARTHWORK
300-1 CLEARING AND GRUBBING.
300-1.1 General. - Amend as follows:
Amend paragraph 3 as follows:
“The natural ground surface shall be cleared of all vegetable growth, such as trees, logs, upturned stumps, roots of downed trees, brush, grass, weeds, shrubs, ground cover, tree stumps, decorative landscape rocks, edging, railroad ties, other decorative landscape treatments, boulders, rock, portland cement concrete, and all other objectionable materials, within the limits of construction.”
Add the following paragraphs:
Grubbing and removal of organic debris shall include the repair and/or replacement of all parkway irrigation piping and systems necessary to perform work on this Contract and capping pipelines until such time that permanent repairs and/or replacements have been made.
All debris removed from the project site under this item shall be disposed of at an approved dump site. All transportation costs and dump fees shall be borne by the Contractor.
Clearing and Grubbing shall include, but is not limited to, the following:
1. Removal of existing AC berms.
2. Removal of all curb and gutter, cross gutters, and spandrels shall be replaced within three (3) calendar days. The Asphalt Concrete patch for areas with curbs and gutters removed and replaced shall be placed within two (2) working days after the curb a nd gutter, cross gutters, and spandrels are replaced. Removal of all sidewalks shall be replaced within three (3) calendar days.
3. Saw cut and removal of poles, posts, PCC pavements, curb, gutter, and sidewalk. Holes resulting from removal of existing poles and posts from existing PCC, AC pavements and curbs and gutters, shall be filled or patched with like materials. Self -propelled drop hammers will not be allowed for removals.
4. Removal of all raised pavement markers not conforming to the approved plan or conflicting with the proposed striping as shown on the plans in accordance with Subsection 312 -3, Removal, of the Standard Specifications.
5. Removal and disposal of boulders, rock or PCC.
6. All trees and shrubs less than 3m ( 9 ft) directly above the entire sidewalk surface shall be trimmed and removed by the contractor to allow a clear path of travel for pedestrians.
7. Irrigation system relocation:
Redlands Regular Meeting of 02-06-24
557 of 857
GC 40
Any irrigation systems in conflict with the proposed improvements that are removed, damaged, disturbed, or broken shall be modified, repaired, and/or replaced to be operable and provide full irrigation coverage to the areas requiring irrigation using new m aterials, equal or better than the original materials, with 20 mm (3/4 in) Schedule 40 PVC being the minimum acceptable for underground lines and 13 mm (1/2 in) Schedule 80 being minimum acceptable for risers and with the systems not being out of operatio n for more than two (2) days. No payment for work associated with the irrigation repair will be released, until all irrigation is complete, operable and accepted by the City.
All trees, shrubbery and lawns deprived of normal irrigation watering due to a disruption of service caused by the Contractor’s operations shall be regularly and thoroughly irrigated by the Contractor so that said plantings will not be damaged. If any tre es, shrubbery or lawns die or suffer unacceptable damage as a result of or precipitated by the Contractor’s operations the Contractor shall replace same with the same plant species and size. Existing grass lawns within areas that must be excavated and/or re-graded shall be cut into approximate 305 mm (1 ft) squares, removed, protected, cared for and replaced as soon as possible. Dead, dying, and unacceptably damaged grass shall be replaced with new grass sod.
8. Existing inlets, slotted drains, drainage pipes, concrete gutters, drainage pipes, where any portion of such structure is within 1m of the grading plane in the excavation areas, or within 300 mm (1 ft) of original ground in embankment areas, or where shown on the plans to be removed, shall be completely removed and disposed of accordingly.
9. Removal and disposal of existing drainage inlet structure and PCC or AC apron.
10. The Contractor shall dispose all materials not being salvaged outside of the right -of-way and shall pay for all costs for disposal.
11.Removal and disposal of any abandoned utilities that may interfere with the improvements.
12.Self-propelled drop hammers will not be allowed for removals.
300-1.3.1 General. - Add the following paragraphs:
The Contractor shall dispose portland cement concrete, stone rubble, and brick at an approved dump site.
All reprocessed asphaltic cement concrete may be placed as the lower course of crushed aggregate base material. If the Contractor chooses not to reprocess the material, disposal at an approved dump site shall be required. All costs for disposal shall be borne by the Contractor. If the Contractor chooses to reprocess material, it shall be protected and remain contaminate -free, otherwise disposal at an approved dump site will be required with all costs borne by the Contractor.
All reprocessed asphaltic cement concrete to be used as crushed aggregate base shall be ground to conform to Section 200-2.2.
Redlands Regular Meeting of 02-06-24
558 of 857
GC 41
300-1.3.2 (a) Bituminous Pavement. - Amend the following:
Amend the second sentence as follows:
“Saw cutting of edges to be joined shall be with a power-driven saw. The groove shall be cut to a minimum depth of 4 inches (102 mm).”
Amend the third sentence as follows:
“Where bituminous pavement is to be removed, a cold mill header cut of maximum 6 feet (1.8 m) in width perpendicular to the join line shall be made, and a minimum laying depth of 1 inch (25mm) of new pavement material shall be provided at the join line.”
Amend the fourth sentence as follows:
“The edges of existing concrete pavement adjacent to the trench shall be saw cut to neat straight lines for the purpose of removing the damaged pavement areas.”
Add the following sentence:
Work under this item shall include asphalt concrete berms.
300-1.3.2 (b) Concrete Pavement. - Amend the following:
Amend the second sentence as follows:
“Saw cuts shall be made to a minimum depth of 4 inches (102 mm).”
Amend the third sentence as follows:
“If a saw cut in concrete pavement falls within 5 feet (1.5 m) of a construction joint, cold joint, expansion joint, or edge, the concrete shall be removed to the joint or edge.”
300-1.3.2 (c) Concrete Curb, Walk, Gutters, Cross Gutters, Driveways and Alley Intersections. - Amend the following:
Amend the first sentence as follows:
“Concrete shall be removed to neatly sawed edges with saw cuts made to a minimum depth of 4 inches (102 mm).”
Amend the third sentence as follows:
“No section to be replaced shall be smaller than 36 inches (1 m) in either length or width.”
Amend the fourth sentence as follows:
“If the saw cut in sidewalk or driveway would fall within 36 inches (914 mm) of a construction joint, expansion joint, or edge, the concrete shall be removed to the joint or edge, except that where the saw cut would fall within 12 inches (300mm) of a score mark, the saw cut shall be made in and along the score mark.”
Amend the fifth sentence as follows:
“curb and gutter shall be sawed to a depth of 4 inches (102 mm) on a neat line at right angles to the curb face.”
Redlands Regular Meeting of 02-06-24
559 of 857
GC 42
300-1.3.2 (d) Striping and Markings. All existing striping, markings and raised pavement markers shown to be removed or necessary to be removed from paving areas. This item includes removal in compliance with applicable laws and cleanup of residue from the operation.
All striping, markings and raised pavement markers removed beyond the limits shown on the plans for and/or at the convenience of the Contractor shall be replaced at the Contractor’s expense.
300-1.3.2 (e) Structures. All existing concrete structures (reinforced or non -reinforced) as shown on the plans to be removed or abandoned, including but not limited to, undersidewalk drains, manholes, headwalls, bulkheads, drop inlet structures, energy dissipaters, catch basins, vaults and pipelines. Abandonment shall include all cuts and concrete plugs necessary to seal ends or openings of abandoned pipes or structures.
300-1.3.2 (f) Rock Curbs. All rock from rock curb removals, as shown on the plans or required for construction of the project, shall be transported, delivered and unloaded at a storage site as directed by the Engineer.
300-1.3.2 (g) Miscellaneous Removals. All other removals of facilities, as shown on the plans but not covered under separate bid items, and any underground facilities found during the work and not shown on the plans shall be performed. The City has endeavored to show all known underground f acilities but is not responsible for unknown or abandoned facilities. Unknown underground facilities shall be paid as extra work.
300-1.3.2 (h) Miscellaneous Relocations. All relocation work as shown on the plans or required for construction of the project, but not covered under separate bid items, shall be included as a part of Subsection 300-1 Clearing and Grubbing. All relocation work performed as a part of clearing and grubbing work shall conform to the requirements and specifications of the agency or utility having jurisdiction over the item to be relocated.
300-1.4 Payment. - Add the following sentence to paragraph 1:
Payment for work on this item shall be made as a percentage of the work completed at each monthly payment.
300-2 UNCLASSIFIED EXCAVATION.
300-2.2.2 Wet Material. - Amend the second sentence of the paragraph:
“If such high moisture content is not the result of any action on the part of the Contractor, or inaction in protecting the work during the course of the contract, the work involved will be paid for in the following manner: Over-excavation and disposal work shall be considered “extra work,” with backfill and compaction of crushed aggregate base paid under the appropriate bid item in these specifications.”
300-12 MISCELLAENOUS GRADING. The parkway, whether landscaping exists or not, shall be graded and compacted to achieve drainage towards the street at a slope of 2% . Grading shall be coordinated such that it is the last item of work to be completed, prior to site clean -up. Loose Redlands Regular Meeting of 02-06-24
560 of 857
GC 43
material and dirt shall be raked , compacted and distributed throughout the parkway area. Areas adjacent to installed improvements must be graded to a level within one inch from the finished surface. Extra dirt/fill shall be removed from the project in accordance with Specifications.
The Contractor, at his expense shall photo-document pre-construction conditions prior to starting excavating. After construction is completed, the Contractor shall photo -document the finished grade. The Contractor shall provide the City with said photos with addresses identifying each property location, the direction the photograph was taken (facing North, South etc). The Contractor shall keep a copy of the photos (either electronically or hard copy) and provide the City with electronic copies of the photos.
SECTION 301 - TREATED SOIL, SUBGRADE PREPARATION AND
PLACEMENT OF BASE MATERIALS
301-1 SUBGRADE PREPARATION.
301-1.3 Relative Compaction. - Amend the second sentence of paragraph 1 as follows:
“When base material, curb, gutter, alley pavement, driveways, or sidewalks are to be placed on the subgrade material, the top 6 inches (150mm) of such subgrade material shall be compacted to a relative compaction of 95 percent.”
301-2.1 General. – Add the following paragraphs:
The contractor shall use ‘crushed aggregate base’ or ‘crushed miscellaneous base, fine graded’ as the base material. The use of ‘processed miscellaneous base,’ ‘select subbase,’ or ‘disintegrated granite’ shall not be used as base material.
The contractor may use ‘pulverized miscellaneous base’ (grindings) as part of the crushed base material. Said grindings shall be uncontaminated and placed in an even thickness as the lower course of crushed base material. Spreading and compacting shall c omply with Sections 301 -2.2 and 301-2.3.
301-2.3 Compacting. – Amend the second sentence of paragraph 3 as follows:
“Compaction in the excepted areas shall be as specified in 211 -1 with each layer of compacted base material having a minimum relative compaction of 95 percent.”
301-2.4 Measurement and Payment. – Add the following paragraph:
Payment shall be made for cold -planing, storing, placing, and compacting reprocessed asphalt concrete pavement (grindings) as part of the crushed aggregate base (CAB) material. The volume of grindings placed shall be figured and a tonnage figure computed using 9.35 kg/m^3 (150 pounds per cubic foot). This tonnage figure shall be paid as par t of the crushed aggregate base tonnage for this project.
301-7 FULL DEPTH RECLAMATION WITH MECHANICAL STABILIZATION (FDR- 25)
Redlands Regular Meeting of 02-06-24
561 of 857
GC 44
301-7.1 Description. This rehabilitation alternative consists of pulverizing the existing asphalt concrete (AC) layer along with the underlying unbound material to a depth of 6, 9 or 12 inches per plan and specifications. The properties of this layer are considered to be similar to an Aggregate Subbase material with a modulus of at least 25 ksi.
The manufacture of the recycled base course shall be done in -place by pulverizing and blending the existing AC layer and base materials, if present. The process shall be accomplished in accordance with these specifications and conform to the lines and grades shown in the plans or as established by the engineer.
301-7.2 Construction . The asphalt concrete surfacing and underlying base materials shall be pulverized such that 100 percent of the material will pass a two -inch sieve and a minimum of 90 percent will pass a one and one-half inch sieve. All materials other than rock and pulverized asphalt concrete shall be broken up such that these materials will pass a one inch sieve. The pulverized materials shall be free of roots, weeds, wood, and construction debris. All grass and other vegetation shall be removed from the edge of the exiting pavement o r lip of gutter pan to prevent contamination of the pulverized bituminous material during the milling operation.
Trimming and disposal of excess material, if required, will be performed on the intimate mixture of pulverized asphalt concrete, base materials and subgrade soil. Excess pulverized material is the surplus that results after trimming and grading the pulveri zed pavement section to the lines and grades matching existing and/or per plans and specifications.
Do not start pulverized roadbed activities if the ambient air temperature is below 40F. If the ambient air temperature falls below 40F, you may only compact and finish pulverized roadbed.
Before starting daily pulverized roadbed activities, sweep the pulverized roadbed area constructed the previous day to remove loose material.
301-7.3 Surface Preparation. Before pulverized roadbed activities start, prepare the existing roadway surface by:
1. Clearing foreign matter including vegetation
2. Removing standing water
3. Referencing the profile and cross slope
4. Marking the proposed longitudinal cut lines on the existing pavement as follows:
4.1. Cut lines must coincide with points where the existing cross slope changes, approximately at the centerline and edge of traveled way
4.2. Cut lines must indicate the sequence of the cuts
5. Referencing existing lane lines and striping layout
Final subgrade surface shall slope away from the street centerline to a maximum of 3% grade.
Pulverized asphalt material must be used as base material to meet new cross slope requirements.
Native sub-grade material may need to be hauled off to allow for th e use of all pulverized base material. No additional compensation will be allowed for any sub -grade removal and haul -off if required. Any contaminated material will be removed and disposed of by the contractor off site at his expense. Any shortage of mater ial, caused by premature disposal of the indicated surplus Redlands Regular Meeting of 02-06-24
562 of 857
GC 45
material by the contractor, shall be replaced by it and no additional compensation will be allowed for such replacement.
301-7.4 Spreading, Mixing, and Compacting . Do not use a heating device to soften the pavement. Remove any visible oversized materials in the pulverized roadbed mixture prior to shaping and compacting. If you encounter unstable subgrade or rocks greater than 4 inches in the roadway section, notify the Engineer. The Engineer determines the extent of the unsuitable material and the corrective measures to be taken.
According to the Section 301 -2.3, the compaction shall always be commenced along the edge of the area to be compacted and the roller shall gradually advance toward the center of the area to be compacted. Rollers shall be operated along lines parallel or concentric with the centerline of th e road being constructed, and no material variation therefrom will be permitted. All rollers must be maintained in good mechanical and working condition.
The relative compaction of each layer of compacted base material shall not be less than 95 percent.
ASTM D2922, Methods of Density of Soil and Soil Aggregate in Place by Nuclear Methods, (or ASTM D1556). After compaction, the sub-grade shall be firm, and unyielding.
301-7.5 Finishing. The finished pulverized roadbed surface must not vary more than 0.05 foot from the lower edge of a 12 -foot straight edge laid in directions parallel and perpendicular to the centerline. Variations within the above specified tolerances shall be compensating so that the average grade and cross section specified are met. The finished surface must be free from segregation, tearing, and scarring, and have a uniform surface texture throughout the work limits.
301-8 FULL DEPTH RECLAMATION WITH CEMENT STABILIZATION (FDR-200)
301-8.1 Description. This rehabilitation alternative consists of pulverizing the existing asphalt concrete (AC) layer along with the underlying unbound material to a depth of 6, 9 or 12 inches per plan and specifications. The properties of this layer are considered to be similar to an Aggregate Subbase material with a modulus of at least 200 ksi.
The manufacture of the recycled base course shall be done in -place by pulverizing and blending the existing AC layer and base materials, if present , and adding cement . Micro-cracking of the completed cement stabilized surface is required before HMA is to be placed directly on top of the cement treated surface, regardless of the AC thickness. The process shall be accomplished in accordance with these specifications and conform to the lines and grades shown in the plans or as established by the engineer.
The cement content must be 2% by dry weight of FDR with cement with a dry unit weight of 130 lb/cu ft for 6” FDR section. The cement content must be 3% by dry weight of FDR with cement with a dry unit weight of 130 lb/cu ft for 9” FDR section. The cement content must be 4% by dry weight of FDR with cement with a dry unit weight of 130 lb/cu ft for 12” FDR section. Cement must be Type II or Type V Portland cement specified in ASTM C 150/150M.
Redlands Regular Meeting of 02-06-24
563 of 857
GC 46
301-8.2 Construction . The asphalt concrete surfacing and underlying base materials shall be pulverized such that 100 percent of the material will pass a two -inch sieve and a minimum of 90 percent will pass a one and one-half inch sieve. All materials other than rock and pulverized asphalt concrete shall be broken up such that these materials will pass a one inch sieve. The pulverized materials shall be free of grass and vegetation, and construction debris to prevent contamination of the pulverized material s. Mixing shall continue until, and at the speed of the recycling unit adjusted to ensure, a homogenous mixture of the above materials and pulverized materials are achieved.
Trimming and disposal of excess material, if required, will be performed on the intimate mixture of pulverized asphalt concrete, base materials and subgrade soil. Excess pulverized material is the surplus that results after trimming and grading the pulveri zed pavement section to the lines and grades matching existing and/or per plans and specifications. Excess pulverized material shall consist of non-treated well mixed pulverized AC pavement and subgrade.
Do not start pulverized roadbed activities if the ambient air temperature is below 40F. If the ambient air temperature falls below 40F, you may only compact and finish pulverized roadbed.
Before starting daily pulverized roadbed activities, sweep the pulverized roadbed area constructed the previous day to remove loose material.
301-8.3 Surface Preparation. Before pulverized roadbed activities start, prepare the existing roadway surface by:
1. Clearing foreign matter including vegetation
2. Removing standing water
3. Referencing the profile and cross slope
4. Marking the proposed longitudinal cut lines on the existing pavement as follows:
4.1. Cut lines must coincide with points where the existing cross slope changes, approximately at the centerline and edge of traveled way
4.2. Cut lines must indicate the sequence of the cuts
5. Referencing existing lane lines and striping layout
Final pavement surface shall slope away from the street centerline to a maximum of 3% grade.
Pulverized material must be used as base material to meet new cross slope requirements. Native sub-grade material may need to be hauled off to allow for the use of all the pulverized base material. No additional compensation will be allowed for any sub -grade removal and haul -off if required. Any contaminated material will be removed and disposed of by the contractor off site at his expense. Any shortage of material, caused by premature disposal of the indicated surplus material by the contractor, shall be replaced by it and no additional compensation will be allowed for such replacement.
301-8.4 Spreading, Mixing, and Compacting . Do not use a heating device to soften the pavement. R emove any visible oversized materials in the pulverized roadbed mixture before shaping and compacting. If you encounter unstable subgrade or rocks greater than 4 inches in the roadway section, notify the Engineer. The Engineer determines the extent of the unsuitable material and the corrective measures to be taken.
Redlands Regular Meeting of 02-06-24
564 of 857
GC 47
Recycling shall be performed to the depth provided in the plans, while incorporating stabilizing agents, mineral filler, additional aggregate and water. Mixing shall continue until, and the speed of the recycling unit adjusted to ensure, a homogenous mixtu re of the above materials and pulverized materials is achieved. Pre -cutting, grading and light compacting of the recycled material shall be performed prior to incorporation of the stabilizing. Spread cement uniformly over the full roadway surface width. Do not spread cement more than 30 minutes before mixing. Do not apply dry cement in windy conditions that will result in dust outside the FDR with cement area. The application rate must be the mix design rate or the ordered application rate in lb/sq yd ±
0.5 percent. The application rate of all stabilizing agents shall be continuously monitored. If the measured application rate falls outside the above tolerance, then the recycling operations shall be stopped and corrected before proceeding. Do not spread cement and aggregate before pulverizing.
Water must be injected through the pulverizing machine. The injection rate of mixing water must be sufficient to produce the FDR with cement material mixing moisture content. The water content of the stabilized material shall be monitored closely to ensure proper compaction. Mark where the center of the pulverizing drum stops. Start the following cut on this alignment at least 2 feet behind the mark. Before compacting, remove solids larger than 3 inches in any dimension by hand.
Immediately after pulverizing and mixing, compact FDR with cement to the minimum relative compaction. Do not allow more than 2 hours between final mixing of the pulverized material with cement and completion of initial compaction before trimming . During grading and final compaction add water to maintain the mixing moisture content as described in the mix design. Do not allow more than 2 hours to elapse from the time water is added to the aggregate and cement to completion of final compaction after trimming.
Longitudinal joints between adjacent stabilization passes shall be overlapped at least 4 inches.
Transverse joints between the recycling process shall be saw-cut, if necessary, to provide a vertical clean face to ensure proper compaction. Compaction of cem entitious stabilizer begins within 20 minutes after mixing and achieving gradation and moisture requirements.
According to the Section 301 -2.3, the compaction shall always be commenced along the edge of the area to be compacted and the roller shall gradually advance toward the center of the area to be compacted. Rollers shall be operated along lines parallel or concentric with the centerline of th e road being constructed, and no material variation therefrom will be permitted. All rollers must be maintained in good mechanical and working condition.
The relative compaction of each layer of compacted base material shall not be less than 95 percent.
ASTM D2922, Methods of Density of Soil and Soil Aggregate in Place by Nuclear Methods, (or ASTM D1556). After compaction, the sub-grade shall be firm, and unyielding.
Construction joints shall have vertical faces and shall be made in thoroughly compacted material.
Additional mixture shall not be placed against the construction joint until the joint has been approved by the Engineer. The face of the cut joint shall be lean and free of deleterious material and shall be kept moist until the placing of the adjacent FDR with cement.
Redlands Regular Meeting of 02-06-24
565 of 857
GC 48
301-8.5 Finishing. Once the entire working width (full lane width plus effected shoulder width) has been stabilized, and only after primary compaction has been completed, the entire working width shall be graded to the required profile and cross -slope. Disturbance to the stabilized and primary compacted material shall be kept to a minimum during this grading and shaping operation.
The finished pulverized roadbed surface must not vary more than 0.05 foot from the lower edge of a 12-foot straight edge laid in directions parallel and perpendicular to the centerline. Variations within the above specified tolerances shall be compensating so that the average grade and cross section specified are met. The finished surface must be free from segregation, tearing, and scarring, and have a uniform surface texture throughout the work limits.
Immediately after compaction, apply water and roll with no vibration. The finished surface must be free of ruts, bump, indentations, segregation, raveling, and any loose material.
The completed cement treated subgrade shall be moist cured continuously until it is in a firm and unyielding condition. The cement treated subgrade shall be kept free from heavy traffic during the curing period or until the asphalt concrete surfacing is pl aced whichever is less, unless otherwise directed by the Engineer. Moisture curing shall be the only method of curing prior to micro - cracking.
Micro-cracking shall be performed with several vibratory roller passes 48 to 72 hours after finish grading to prevent severe, wide cracks from forming thus reduces the potential for reflective cracking through the HMA layer. Micro -cracking shall be perform ed before the application of asphaltic emulsion curing seal. After micro -cracking is complete additional moisture curing may be used. Any additional water required to achieve maximum density shall be applied by spraying the surface of the stabilized material with light applications. Care shall be taken so as not to over- apply additional water to any areas of the stabilized material.
While open to traffic and before placing HMA, maintain the FDR with cement surface free of ruts, bumps, indentations, raveling, and segregation. If FDR with cement material is damaged, it shall be repaired by removing and replacing the entire depth of aff ected layers in the damaged area.
Feathering will not be permitted for repair of low areas.
Asphaltic emulsion curing seal must be applied on the completed cement treated base immediately before placing HMA. Asphaltic emulsion curing seal must comply with Caltrans Standard Section 94, Grade SS1 or CSS1. Dilute and thoroughly mix asphaltic emulsion for curing seal at a ratio of 1 part water to 1 part asphaltic emulsion. The water must no cause premature separation of the emulsion. Uniformly apply the diluted curing seal at a rate of 0.1 gal/yd 2 of cement treated base surface.
SECTION 302 - ROADWAY SURFACING
302-4 SLURRY SEAL SURFACING.
302-4.3.1 General. – Add the following paragraphs:
Redlands Regular Meeting of 02-06-24
566 of 857
GC 49
All slurry mixing machines shall be equipped with a Fines Feeder for the adding of cement or granular Aluminum Sulfate.
Prior to the beginning of slurry operations, the Contractor shall furnish, at no cost to the City, current licensed weigh master’s certificates indicating the net weight capacity of the aggregate bin.
The Contractor shall provide a drive upon scale at the project site or an alternate site approved by the City. The drive on scale shall show the net weight of the aggregate bin on each slurry machine before the machine and product will be approved for applying slurry on the project.
All slurry machines are to carry, at all times, a calibrated emulsion measuring stick. The emulsion measuring stick is to be calibrated in 10 -gallon increments to the slurry machine it is used on.
Emulsion measuring sticks from other slurry machines will not be allowed to measure the gallons of emulsions on the slurry machines they were not calibrated to. The emulsion measuring stick is to have the slurry machine number or identification permanently marked on the stick. The gallons of emulsion are to be measured with a calibrated emulsion measuring stick and recorded before leaving and after returning to materials site. Use of a slurry machine will not be allowed if it does not have a calibrated emulsion measuring stick.
The Contractor shall furnish prior commencing work, a calibrated stick in 10-gallon increments to measure the oil in the trailer storage tanks in gallons. The measuring stick shall be calibrated to the trailer storage tank it is used on. The inspector sh all check the oil in each load “in and out” and in the storage tanks at the beginning and end of each day to determine the amount of emulsion used for that day. Emulsion is not to be transferred from delivery tank to on -site storage tank before the City performs the sieve analysis on the emulsion. Aggregate used in the slurry shall not exceed a moisture content of four percent (4%) by weight of dry aggregate.
Contractor may not schedule more than 150 tons of slurry to be placed per day. Slurry may not be applied at more than 150 feet per minute.
The Contractor shall provide a self-propelled 10 ton pneumatic roller with a tire pressure of 50 PSI and equipped with a water spray system. The Contractor shall roll the required streets the same day they are slurried. The Contractor will be responsible for proper scheduling of the work s uch that the rolling can be properly done within the given time constraint. Failure to comply shall result in a $250.00/calendar day liquidated damage being assessed per incident. The cost of furnishing the roller and operator shall be included in the price paid for slurry seal.
The Contractor is hereby advised that City streets, parking lots, or other City -approved property will not be allowed as a site for stockpiling and batching. Arrangements for an acceptable site shall be the sole responsibility of the Contractor.
The Contractor shall sweep any raveled material on the street one (1) week after the initial placement. If the Engineer determines the raveling is excessive, the frequency of sweeping shall be adjusted to the field conditions of the raveling. If raveling continues within two (2) weeks of the initial placement, the street shall be swept and reslurried with a Type I mixtures (Local Streets) or a Type II (Arterial/Collector Streets) at no cost to the City. Raveling can be identified by the presence of “black pebbles” in the gutter.
Redlands Regular Meeting of 02-06-24
567 of 857
GC 50
The Contractor shall remove any and all weeds that are growing through cracks from the project street located within the pavement or growing between the concrete gutter and the pavement and spray a herbicide mixture of either Hyvar mixed with Roundup or Pramatol mixed with Roundup, or approved equal, at least fourteen (14) calendar days prior to slurr ying. The herbicide mixture shall contain Blazon, or approved equal, a purple dye to easily confirm the herbicide has been applied. The work shall be approved by the Engineer or his representative prior to slurrying. Full compensation for plant removal and herbicide treatment shall be considered as included in the unit cost for slurry seal.
Longitudinal joints must correspond with lane lines. You may request other longitudinal joint patterns if they do not adversely affect the slurry seal. Spread slurry seal in full lane widths. Do not overlap slurry seal between adjacent lanes more than 3 inches. Use a material, such as building paper at transverse joints and over previously placed slurry seal to prevent double placement.
Remove the material after use. Use hand tools to remove spillage.
Full compensation for developing a water supply, for furnishing and placing all water required for work done in the Contract, including extra work shall be included in the prices paid for the various items of work requiring water; and no separate payment w ill be made therefore. The Contractor shall supply the City with licensed weighmaster’s certificates of weight for all delivered aggregates to the job during the course of each day. Aggregate shall be delivered to the project only in the presence of a City representative. The Contractor shall also present weighmaster certificates for the amount of such aggregate remaining at the completion of the project at no cost to the City.
Payment shall be determined by the amount that is physically placed, which c annot exceed the amount that is delivered to the job site with the certified weighmaster tickets. There shall be not outside work done utilizing materials from the tanks or stockpiles stored for the City’s Contract.
Prior to storing aggregate on private property, the Contractor shall submit to the Engineer written permission from the property owner for such stockpiling.
Precautions shall be taken to ensure that stockpiles do not become contaminated with oversized rock, clay, silt, or excessive amounts of moisture. The stockpiles shall be kept in areas that drain readily. Segregation of the aggregate will not be permitted.
The Contactor shall protect the wet slurry from traffic at all times and if damaged or defaced, the Contractor shall repair said damage at no additional cost to the City.
The placement of slurry seal may be suspended with the concurrence of the Engineer due to unsuitable weather, temperature conditions, or other conditions that are considered unfavorable for the prosecution of the work. The Contractor shall immediately com ply with the order of suspension by the Engineer, and work shall not be resumed until authorized by the Engineer.
302-4.8 Spreading and Application. - Add the following paragraphs:
Prior to applying slurry seal, the Contractor shall clean, to the satisfaction of the Engineer, the street surface with a power sweeper, remove all R.P.M.’s, abrasive grind or sandblast completely all lane lines, street legends, crosswalks or other painted or thermoplastic surfaces. This is Redlands Regular Meeting of 02-06-24
568 of 857
GC 51
necessary to provide a good bonding surface for the slurry seal, as well as eliminate “ghosting” of the old striping and markings as the new slurry wears off over time.
It is anticipated that nuisance water, such as storm water runoff and irrigation water, will run in and across the right-of-way at various time throughout the period of construction. It shall be the responsibility of the Contractor, at their own expense, to provide for and protect the work from such water. In addition, the Contactor’s responsibility shall include handling nuisance waters such that their operations do not cause them to damage existing improvements or properties adjacent to or near the site of work.
Slurry shall not be applied when the atmospheric temperature is less than 65oF (18oC).
The application of slurry shall not commence until after 8:00 a.m., and shall conclude at 1:30 p.m. unless other authorized by the Engineer. The slurry shall be sufficiently cured to be open to traffic by 4:00 p.m. The portions of streets to be slurried shall be closed from the time the application begins until the mixture as achieved sufficient set to be opened to traffic.
The slurry shall be applied in such a manner that no ripples or waves exist. If ripples or waves occur in the slurry during the application, the work shall cease and the Contractor shall correct the situation. The Contractor may use a drag to knock down ridges. If ripples or waves are not corrected to the Engineer’s satisfaction, the street shall be reslurried at the Contractor’s expense.
The Contractor shall, at the direction of the Engineer, repair the reseal to the entire street, or complete section thereof, as determined by the Engineer, which have not been sealed properly (includes areas that have failed to meet yield and mix design specifications) and completely. No compensation will be provided for slurry seal used in repair and reseal work.
Each slurry crew shall be composed, at a minimum, of a coordinator at the project site at all times, a competent quick-set mixing man, a competent driver, two squeegee men, and sufficient laborers for any handiwork and cleanup.
Surface oil and grease shall be removed or sealed with shellac or an equivalent material approved by the City before the application of the slurry seal. Full compensation for surface oil and grease removal shall be considered as included in the unit cost for slurry seal.
The Contractor shall roll all cul-de-sacs (the last 250’ minimum), the last 250’ of dead-end streets and knuckle curves. Full compensation for rolling the slurry shall be considered as include in the unit cost for slurry seal.
During slurry seal operations, it shall be the Contractor’s responsibility to place protective covering over, or to otherwise avoid slurry seal coating of manholes, utility covers, pavement markers (reflective and non -reflective), concrete gutters, concret e cross gutters, and drainage facilities, survey monuments and remove said covering and/for slurry seal coating after slurry sealing has been completed.
Redlands Regular Meeting of 02-06-24
569 of 857
GC 52
The start and finish of slurry application shall be a straight line which, unless otherwise approved by the Engineer, shall be obtained by laying a strip of building paper or other material approved by the Engineer on the pavement surface. After applicati on of slurry, the paper is to be removed leaving a straight edge. The entire street surface area shall be sealed the same day.
302-4.8.1 Crack Sealing and Filling. Crack sealing shall be performed prior to the Slurry Seal application. Pavement cracks 1/4" wide and larger shall be sealed. Pavement cracks 1/8" to 1" wide shall be cleared of all loose particles of dust, dirt and laitance with oil -free compressed air immediately preceding the sealing operation. Cracks shall be routed out as necessary to provide a reservoir for the sealer that will have a depth of l" to 1 1/2".
The crack sealing material shall be a hot-applied asphalt (Crafco Polyflex or approved equivalent).
The crack sealing material must not be modified or diluted in any way. Pavement cracks larger than 1” wide shall be filled with the mixtures per Specification Section 203 -6.4 Type E (Extra Fine).
A wand and nozzle type application shall be used to fill all cracks with crack sealing material.
Crack sealing material shall be applied in two applications with the possibility of additional applications to fill the crack within the allowable tolerance. The cracks must be filled to the surface and not overfilled or applied to the top of adjoining pavement or con crete surfaces. The cracks shall be squeegee immediately after the sealant has been applied to insure conformity with the pavement surface.
The crack sealing material shall then be allowed to penetrate and sink into the crack area for a minimum of one hour. Each crack must then have a second application of crack sealer material applied in the crack area only to within + 0.01' of the adjoining pavement surface. If the material is a cold-applied, polymer modified petroleum emulsion, sand will be applied over the crack sealing material after the second application, covering a minimum of 1 1/2 inches each side of the crack and not more than 3/4 inch higher than the top of the pavement. The contractor shall be responsible for the removal of all excess sand which shall be removed within three hours after being applied.
302-5 ASPHALT CONCRETE PAVEMENT.
302-5.1 General. - Add the following paragraphs:
Asphalt concrete pavement structural sections equal to or greater than 3 inches (76 mm) in thickness shall be installed in two lifts. Base course aggregate material size shall be ¾ inch (19 mm) and cap course aggregate material size shall be ½ inch (13 mm). All pavement shall be placed over 4 inches of crushed aggregate base, unless compacted to 95% relative compaction.
All valves within project limits in the public right -of-way shall be raised to finish grade as a part of this work. The Contractor shall furnish and install new can or slip can materials as necessary.
If new water valve lids are necessary, they shall be supplied by the Municipal Utilities and Engineering Department. All valve can lids within the project limits in the public right -of-way shall be painted the appropriate color for the utility they represent (ie. Water - Blue, Gas - Yellow, Fire – Red, etc.).
Redlands Regular Meeting of 02-06-24
570 of 857
GC 53
302-5.2 Timeline of Paving Operations.
All paving operations shall follow the timeline and requirements shown below unless otherwise approved by the City:
PAVING TIMELINE
DESCRIPTION OF WORK
TIME PERIOD
WEEK 1
(DAY 1-7)
WEEK 2
(DAY 8-14)
WEEK 3
(DAY 15-21)
WEEK 4
(DAY 22-28)
PAVING (START TO FINISH) (1)
CURE PERIOD (2)
MANHOLE ADJUST TO GRADE (3)
STRIPING & PAVEMENT MARKINGS (4)
TRAFFIC LOOPS (5)
NO PARKING SIGNS ALLOWED (6)
Note: All time periods shown above are the maximum amount of allowable time for each activity.
This timeline does not apply to the installation or repair of curb and gutter, ac dikes, sidewalks, cross gutters, curb ramps, driveway approaches or truncated domes.
(1) In no case shall any street segment remain unpaved longer than three calendar days if no other work activity is being performed on that street segment. Any deviation from the timeline shall result in a penalty assessment of $1,000 per calendar day. (2) No work except cat tracking of proposed striping is allowed during this period; therefore “No Parking Signs” shall not be installed during this activity. (3) Once each manhole is exposed, all associated work to adjust it to grade must be completed within 48 hours. This shall include all adjustments of manholes, vaults, valve cans, etc. as required by the Contract.
(4) All cat tracking and approval of proposed striping shall occur during the cure period. (5) Traffic loops must be installed after the approval of striping layout and prior to the installation of thermoplastic striping and pavement markings. (6) “No Parking Signs” shall be installed per Section 7-19 of these specifications.
302-5.4 Tack Coat. – Delete and replace with the following:
If the asphalt concrete pavement is being constructed directly upon an existing hard -surfaced pavement, a tack coat of High Performance Seal (HPS) No-Track Tack at an approximate rate of
0.05 gallon per square yard shall be uniformly applied upon the existing pavement preceding the Redlands Regular Meeting of 02-06-24
571 of 857
GC 54
placement of asphalt concrete. The surface shall be free of water, foreign material, or dust when the tack coat is applied. To minimize public inconvenience, no greater area shall be treated in any one day than is planned to be covered by asphalt concret e during the same day, unless otherwise approved by the Engineer.
302-5.5 Distribution and Spreading. – Add the following:
Unless otherwise permitted by the Engineer, the top layer of asphalt concrete for shoulders, tapers, transitions, road connections, private drives, curve widening, turnouts, left-turn pockets, and other such areas, shall not be spread before the top layer of asphalt concrete for the adjoining through lane has been spread and compacted. At locations where the number of lanes are changed, the top layer for the through lanes shall be paved first. Tracks or wheels of spreading equipment shall not be operated on the top layer of asphalt concrete in any area until final compaction has been completed or unless directed by the Engineer.
All screed extensions for paving machines shall be provided with a tamper, roller, or other suitable compacting devices.
Asphalt pavers shall be equipped with automatic screed controls and a sensing device or devices.
Automatic grade and slope control shall be used for overlays.
All joints shall be sealed after rolling.
When placing asphalt concrete to the lines and grades noted in the plans or as approved by the Engineer, the automatic screed controls shall control the longitudinal grade and transverse slope of the screed. Grade and slope references shall be furnished, installed, and maintained by the Contractor. The Contractor shall use a ski device, the minimum length of the ski device shall be 30 ft. The ski device shall be a rigid one -piece unit and the entire length shall be utilized in activating the sensor. The Contractor may use a laser to control the screed.
When placing the initial mat of asphalt concrete on existing pavement, the end of the screed nearest the center line shall be controlled by a sensor activated by a ski device not less than 30 ft long.
The end of the screed farthest from center line shall be controlled by an automatic transverse slope device set to reproduce the cross slope approved by the Engineer.
When paving contiguously with previously placed mats, the end of the screed adjacent to the previously placed mat shall be controlled by a sensor that responds to the grade of the previously placed mat and will reproduce the grade in the new mat within a 0.01 ft. tolerance. The end of the screed farthest from the previously placed mat shall be controlled in the same manner as when placing the initial mat.
Should the automatic screed controls fail to operate properly during any day's work, the Contractor may use manual control of the spreading equipment for the remainder of that day; however, the equipment shall be corrected or replaced with alternative auto matically controlled equipment conforming to the requirements in this section before starting the next day's work.
Redlands Regular Meeting of 02-06-24
572 of 857
GC 55
Should the methods and equipment furnished by the Contractor fail to produce a layer of asphalt concrete conforming to the requirements, including straightedge tolerance, of Subsection 302 -
5.6.2 - Density and Smoothness, of the Standard Specifications, the paving operation shall be discontinued and the Contractor shall modify his equipment or furnish substitute equipment. A drop-off of more than 0.15 ft will not be allowed at anytime between adjacent lanes open to public traffic.
The Contractor shall schedule his paving operations such that each layer of asphalt concrete is placed on all contiguous lanes of a traveled way each work shift. At the end of each work shift, the distance between the ends of the layers of asphalt concrete on adjacent lanes shall not be greater than 10 ft. nor less than 5 ft. Additional asphalt concrete shall be placed along the transverse edge at the end of each lane and along the exposed longitudinal edges between adjacent lanes, hand raked, and compacted to form temporary conforms. Kraft paper, or other approved bond breaker, may be placed under the conform tapers to facilitate the removal of the taper when paving operations resume.
302-5.6.1 General. - Add the following paragraph:
All asphalt concrete pavement abutting portland cement concrete gutters shall match and be flush with the gutter lip when finish rolling is complete.
302-5.6.2 – Density and Smoothness. – Delete and replace with the following:
The completed surfacing shall be thoroughly compacted, smooth and free from ruts, humps, depressions or irregularities. Any ridges, indentations or other objectionable marks left in the surface of the asphalt concrete shall be eliminated by rolling or oth er means. The use of any equipment that leaves humps, ridges, irregularities or other objectionable marks in the asphalt concrete shall be discontinued, and acceptable equipment shall be furnished by the Contractor.
The finished surface shall meet the following smoothness criteria:
• When a 12 foot long straightedge is laid on the finished surface parallel to the centerline of the roadway, the finished surface shall not vary from the edge of the straightedge more than 0.05 feet, except at changes in grade,
• When a 12 foot long straightedge is laid on the finished surface perpendicular to the centerline of the roadway and extends from edge to edge of a traffic lane, the finished surface shall not vary from the edge of the straightedge more than 0.05 feet, exce pt at changes in grade.
If the top layer of pavement does not comply with the smoothness specifications shown, remove and replace the entire section or complete a grind and overlay of 1.5 inches or 3 times the aggregate size, whichever is greater. Grind and overlay will be considered as a repair method only when the thickness of the asphalt pavement section is greater than 1.5 inches following the required grinding. Corrected section shall be rectangular to the nearest pavement edge or lane line and to a crosswalk, concrete spandrel or other limits approved by the City. D o not begin corrective actions until the method and limit of correction is authorized by the City. If the tolerances cannot be achieved by the methods described above, the contract or must re -pave the street section, in kind, at their own expenses.
Redlands Regular Meeting of 02-06-24
573 of 857
GC 56
The compaction after rolling shall be a minimum of 91 percent and a maximum of 97 percent of the density obtained on samples compacted with the California Kneading Compactor per California Test 304. Cores will be taken randomly by the City for laboratory testing per California Test 308, Method A at a frequency of three per lot. A lot shall consist of a maximum of 3,000 square yards of asphalt concrete and will be identified in the field by the City . The cores will be averaged to determine the percent of maximum theoretical density, as determined by ASTM D - 2041, per lot to the nearest tenth of a percent.
Reduced payment factors for percent of maximum theoretical density will be per the following table, and will be applied to the entire lot sampled.
Reduced Payment Factors for Percent of Maximum Theoretical Density Asphalt Concrete
percent of maximum
theoretical density
Reduced payment
factor
Asphalt Concrete
percent of maximum
theoretical density
Reduced payment
factor
91.0 0.0000 97.0 0.0000
90.9 0.0125 97.1 0.0125
90.8 0.0250 97.2 0.0250
90.7 0.0375 97.3 0.0375
90.6 0.0500 97.4 0.0500
90.5 0.0625 97.5 0.0625
90.4 0.0750 97.6 0.0750
90.3 0.0875 97.7 0.0875
90.2 0.1000 97.8 0.1000
90.1 0.1125 97.9 0.1125
90.0 0.1250 98.0 0.1250
89.9 0.1375 98.1 0.1375
89.8 0.1500 98.2 0.1500
89.7 0.1625 98.3 0.1625
89.6 0.1750 98.4 0.1750
89.5 0.1875 98.5 0.1875
89.4 0.2000 98.6 0.2000
89.3 0.2125 98.7 0.2125
89.2 0.2250 98.8 0.2250
89.1 0.2375 98.9 0.2375
89.0 0.2500 99.0 0.2500
< 89.0 Remove and replace > 99.0 Remove and replace
In addition to the reduced payment factors below, all costs associated with the testing of the lot which resulted in values outside of the 91-97 percent range, will be withheld from the final payment due to the Contractor.
Following completion of the testing by the City, the core locations within the asphalt pavement shall be repaired by the Contractor.
Redlands Regular Meeting of 02-06-24
574 of 857
GC 57
302-5.6.3 Tracking. All areas receiving asphalt pavement shall be protected from tracking onto adjacent areas. Do not allow traffic on new asphalt pavement until its mid -depth temperature is below 140º Fahrenheit to minimize the tracking.
A rock dust blotter coat per Section 302-9.7 or a sand coat at a rate of 1-2 pounds per square yard shall be applied to the compacted surface for all areas where tracking is a concern. The application of tracking prevention measures shall be determined by the Contractor.
A haul route for all paving operations shall be reviewed and approved by the City prior to the start of any construction activity. No deviations from the approved haul route shall occur unless approved in writing from the City.
All tracking onto adjacent streets, striping or pavement markings shall be the responsibility of the Contractor. All striping and pavement markings shall be removed and replaced in kind by sandblasting. All tracking onto roadway surfaces may require the use of a street sweeper to the satisfaction of the City.
302-5.7 Joints. – Add the following:
Longitudinal joints shall be trimmed to a vertical face and to a neat line if the edges of the previously laid surfacing are, in the opinion of the Engineer, in such condition that the quality of the completed joint will be affected. Longitudinal and transverse joints shall be tested with a 12’ straightedge and shall be cut back as required to conform to the provisions in Subsection 302-5.6.2 Density and Smoothness for surface smoothness. Connections to existing surfacing shall be feathered to conform to the provisions for smoothness.
Longitudinal joints in the top layer shall correspond with the edges of proposed lane striping.
Longitudinal joints in all other layers shall be offset not less than 0.5' alternately each side of the edges of traffic lanes.
All feathered joints shall be sealed after rolling.
302-5.9 Measurement and Payment. – Add the following:
Reduced payment factors per 302 -5.6.2 will be applied to the Contract Unit Price for lots with a Maximum Theoretical Density less than 91.0 and greater than 97.0 percent.
302-5.10 Hot Asphalt Leveling Course. Areas to receive the Hot Asphalt Concrete Leveling Course shall be determined and defined by the project manager and inspector, and identified to the Contractor in the field. Mix for hot Asphalt Concrete Leveling Course shall be 1/2 inch aggregate, C2, as defined in Section 203-6.4.3.
Areas to receive hot asphalt concrete leveling course shall be areas located near or adjacent to existing curbs and/or gutters that are potholed, or have the lip of gutter higher than the adjacent roadway. Potholes, large cracks, or ruts shall be filled t o the surrounding grade elevation and compacted. Hot Asphalt Concrete Leveling Course shall be completed prior to the placement of Type II Slurry Seal, ARAM or resurfacing.
Redlands Regular Meeting of 02-06-24
575 of 857
GC 58
Prior to placement of asphalt concrete, the surface shall be cleaned and all debris and deleterious materials shall be removed. A tack coat meeting the material and application requirements of Section 302-5.4 Tack Coat, shall be applied prior to placement of hot mix asphalt concrete.
302-5.11 Asphalt Pavement Crack Sealing and Filling. Crack sealing shall only be performed as a repair method for conventional hot mix asphalt pavement (HMA) and not installed at project locations which will have asphalt rubber hot mix (ARHM) used as the overlay material. Crack sealing shall be performed after milling of existing asphalt surface and prior to any leveling course, if necessary.
Right after milling of existing asphalt and before crack sealing or filling, Contractor shall remove any and all weeds that are growing through cracks from the project street located within the pavement or growing between the concrete gutter and the pavement and spray a herbicide mixture of either Hyvar mixed with Roundup or Pramatol mixed with Roundup, or approved equal, at least seven (7) calendar days prior to paving. The herbicide mixture shall contain Blazon, or approved equal, a purple dye to easily confirm the herbicide has been applied. The work shall be approved by the Engineer or his representative prior to paving. Full compensation for plant removal and herbicide treatment shall be considered as included in the unit cost for paving.
The crack sealing material shall be a hot-applied asphalt (Crafco Polyflex or approved equivalent).
The crack sealing material must not be modified or diluted in any way. Pavement cracks larger than 1” wide shall be filled with the mixtures per Specification Section 203 -6.4 Type E (Extra Fine).
A wand and nozzle type application shall be used to fill all cracks with crack sealing material.
Crack sealing material shall be applied in two applications with the possibility of additional applications to fill the crack within the allowable tolerance. The cracks must be filled to the surface and not overfilled or applied to the top of adjoining pavement or con crete surfaces. The cracks shall be squeegee immediately after the sealant has been applied to insure conformity with the pavement surface.
The crack sealing material shall then be allowed to penetrate and sink into the crack area for a minimum of one hour. Each crack must then have a second application of crack sealer material applied in the crack area only to within + 0.01' of the adjoining pavement surface. If the material is a cold-applied, polymer modified petroleum emulsion, sand will be applied over the crack sealing material after the second application, covering a minimum of 1 1/2 inches each side of the crack and not more than 3/4 inch higher than the top of the pavement. The contractor shall be responsible for the removal of all excess sand which shall be removed within three hours after being applied.
SECTION 303 - CONCRETE AND MASONRY CONSTRUCTION
303-1 CONCRETE STRUCTURES.
303-1.1 General. - Delete the first sentence of paragraph 1 and replace with the following:
“Concrete bridges, culverts, catch basins, retaining walls, abutments, piers, footings, foundations, drainage inlets, head walls, end walls, wing walls, junction structures, transition structures, Redlands Regular Meeting of 02-06-24
576 of 857
GC 59
manholes, and other similar types of portland cement concrete structures shall be constructed to the lines and grades in conformity with the Plans and Specifications.
303-5 CONCRETE CURBS, WALKS, GUTTERS, CROSS GUTTERS, ALLEY INTERSECTIONS, ACCESS RAMPS, AND DRIVEWAYS.
303-5.1.1 General. - Replace the last paragraph with the following:
No PCC shall be ordered and/or placed until the forms and subgrade have been inspected and approved by the Engineer in the field.
All pull boxes, water meter boxes, and water valve covers shall be adjusted to proposed finish grade and approved by the Engineer in the field prior to placement of the PCC.
The Contractor shall barricade and protect placed PCC from all damage, marks, mars, and/or graffiti. Any PCC damaged, defaced, discolored, or defective shall be replaced at the Contractor's expense.
When removals of curb and/or sidewalk are located at curb return, the Contractor shall install access ramps. The Contractor is to construct all access ramps in accordance with American Disability Act (ADA) Standards/California Code of Regulations Title 24 – Accessibility Regulations. If the ramps constructed by the Contractor are found to be in non -compliance with ADA Standards, the Contractor will be required to remove and replace the ramps to ADA Standards at the Contractor's expense.
303-5.1.2 Drainage Outlets Through Curb. - Add the following paragraph:
Coring shall be required for all drains through existing curbs.
303-5.1.3 Driveway Entrances. – Replace the last paragraph with the following:
Driveway approaches where required, shall be 150 mm (6") thick for single-family residential area, and 200 mm (8") thick for commercial driveway approaches.
303-5.1.4 Walk. The back of sidewalk shall be 2 inches from the street Right-of-Way line unless otherwise specified by the Engineer.
Included in the price of sidewalk construction are retaining curbs. Retaining curbs are needed to retain soils from sloughing and eroding onto the finished sidewalk surface, as a result of grade differentials from existing ground surface to proposed sidewalk surface. Retaining curbs shall be installed when the finished surface is lower than the surrounding grade by 3 inches vertically within 6 inches horizontally. If the vertical difference in elevation is less than 3 inches, the surrounding grade shall be sloped, maximum 2:1 slope, to match the finished elevation. The height of the retaining curb shall be to the height of the existing grade it is retaining. Retaining curbs shall be located within the City’s right-of-way at all times.
303-5.1.5 Access Ramps. Construction of curb ramps shall conform to the Type and Case appropriate for the condition, as specified on the plans and as shown within the 201 2 Standard Plans for Public Works Construction, Plan 111 -5. The Contractor shall be responsible to layout the proposed access ramp to comply with the maximum slope indicated on the plans or Standard Plan 111-5. The maximum slope for the ramp shall not be exceeded unless otherwise approved in Redlands Regular Meeting of 02-06-24
577 of 857
GC 60
writing by the Engineer. The Contractor shall remove and replace access ramps deemed non- compliant with the plans or Standard Plan 111-5.
For proposed locations adjacent to a cross gutter spandrel, sawcuts along the radius of the curb will not be allowed. The spandrel shall be replaced from expansion joint to expansion joint to the extents of the curb removal. For proposed locations adjacent to curb and gutter, sawcuts along the flowline of the curb will not be allowed. The entire curb and gutter shall be replaced from expansion joint to expansion joint as required. Sawcuts at locations other than the expansion joint will not be allowed unless approved by the Engineer. Curb cuts of the existing curb will not be permitted for installation of proposed ramp. Any deviation from these requirements will result in rejection of all work at this location and shall not be included in progress pay ment requests until corrected, per direction from the Engineer.
The Contractor shall verify the extents of sawcut and removal for each access ramp taking into account the maximum slope and transition area required. It shall be the Contractor’s responsibility to identify required removal limits, set concrete forms and verify maximum slopes are not exceeded. The Engineer shall be present to verify the concrete forms prior to the placement of the concrete at each location, however this does not alleviate the responsibility of the accuracy of forms or slopes of the access ramp from the Contractor.
Included in the price of access ramps are retaining curbs. Retaining curbs are needed to retain soils from sloughing and eroding onto the finished ramp surface, as a result of grade differentials from existing ground surface to proposed ramp surface. Retaining curbs shall be installed when the finished surface is lower than the surrounding grade by 3 inches vertically within 6 inches horizontally. If the vertical difference in elevation is less than 3 inches, the surrounding grade shall be sloped, maximum 2:1 slope, to match the finished elevation. The height of the retaining curb shall be to the height of the existing grade it is retaining. Retaining curbs shall be located within the City’s right-of-way at all times.
Access Ramps shall have truncated domes installed in accordance with standard plans and specifications. Truncated domes on new access ramps shall be Armor-Tile, Cast in Place System, or approved equal. Truncated domes installed on existing surfaces shall be Safety Sted TD, or approved equal. Truncated dome panels shall be 36”x48”, inline configuration, with a spacing of
2.35” on center, and Federal Yellow in color.
The access ramp work shall include all related adjustments of pull boxes, pull box covers, signs, and protection of any underground utilities within the work area. The removal and replacement of up to 5 linear feet of sidewalk on each side of the access ramp shall be included within the cost of the access ramp. The removal and replacement of the sidewalk will allow for transition from the top of ramp to adjacent sidewalk and will be utilized as necessary.
303-5.4.3 Weakened Plane Joints, (a) General. - Add the following paragraph:
All weakened plane joints shall be spaced at a maximum of 3.05 m (10') feet for curbs, gutters, and sidewalks. Scoring lines shall conform to those prevailing in the area and be uniform in spacing.
303-5.5.2 Curb. - Replace the first paragraph with the following:
Redlands Regular Meeting of 02-06-24
578 of 857
GC 61
PCC for curb and gutter shall be placed within three working days from removal of the existing PCC curb and gutter. The curb and gutter surface shall not vary more than 3 mm (0.01') from a 3 m (10') straightedge except at the grade changes. Prior to the removal of the forms, the surface shall be finished true to grade by means of a straightedge float of not less than 3 m (10') in length, and operated longitudinally over the surface of the concrete. Form clamps shall be constructed so as not to interfere with the operation of the float. The form on the front of the curbs shall not be removed less than one (1) hour, nor more than six (6) hours after the concrete has been placed. In no event shall forms be removed while the concrete is sufficiently plastic to slump. The top and face of the finished curb shall be true and straight, and top surface of curbs shall be of uniform width, free from humps, sags, blemishes, or other irregularities.
303-5.5.3 Walk. - Add the following paragraphs:
The sidewalk surface shall not vary more than 5 mm (0.02') from the 3m (10') straightedge except at grade changes, and the finished surface shall be free from humps, sags, blemishes or other irregularities. All sidewalks shall be a minimum of 100 mm (4") thick, except at driveways where the sidewalks shall be a minimum of 150 mm (6") thick for single family residential areas and 200 mm (8") thick for all other areas.
303-5.6 Curing. - Add the following paragraph:
Curing compound shall be translucent with red fugitive dye, Type 1, in accordance with Section 201-4 Concrete Curing Compound, of the Standard Specifications.
303-5.7 Repairs and Replacements. - Add the following paragraphs:
In order to minimize vandalism damage to the finished PCC surfaces, the Contractor shall plan his work so that no PCC is poured after 1:00 p.m., unless otherwise authorized by the Engineer in the field.
The Contractor shall barricade and protect placed Portland Cement Concrete from all damages, marks, mars, and/or graffiti. Any Portland Cement Concrete damaged, defaced, discolored, or defective shall be replaced to the satisfaction of the Engineer at the Contractor's expense, and no additional time will be allowed.
Grading, patching, or other remedies to correct the situation will not be accepted unless in the opinion of the Engineer the vandalized area is so small that it does not warrant replacement.
Concrete replacement areas shall be from score mark or control joint to score mark or control joint, and full width of the sidewalk. All replacement areas shall be saw cut.
303-5.8 Backfilling and Cleanup. - Add the following paragraph:
A minimum of 300mm (12”) wide full depth asphalt concrete pavement repair patch and an 450mm (18”) wide 1 -1/2” deep grind outside of the trench width is required when cross gutter, spandrel, driveways, curb and gutter is placed adjacent to existing asphalt concrete pavement. The asphalt concrete pavement repair patch shall be placed within two (2) working days after the cross gutters, spandrels, driveways, curb and gutter are replaced. The asphalt concrete pavement shall be saw cut. All work shall be in a ccordance with the General Permit Conditions and Trench Specifications, latest edition.
Redlands Regular Meeting of 02-06-24
579 of 857
GC 62
SECTION 304 - METAL FABRICATION AND CONSTRUCTION
304-3 CHAIN LINK FENCE.
304-3.4 Measurement and Payment. - Delete paragraph 1 and replace with:
Chain link fence will be measured along the horizontal projection line of the completed fence, deducting the widths of gates and openings.
SECTION 314 - TRAFFIC STRIPING, CURB AND PAVEMENT
MARKINGS, AND PAVEMENT MARKERS
314-1 GENERAL. - Add the following paragraphs:
To insure the protection of storm drain inlets, Best Management Practices (BMPs) shall be employed during all striping operations. Refer to Section 7-8.6.
Each storm drain catch basin or storm drain inlet box shall be marked “NO DUMPING - FLOWS TO CREEK.” Two coats of paint are required. Stencil shall match City’s stencil. Paint and painting shall comply with the specifications.
All street resurfacing work shall include installing fire hydrant pavement markers at all fire hydrant location, whether the pavement markers were existing or not. The pavement markers shall be Type I – Two-Way Blue Retroreflective per Section 214-6 of the Specifications and installed per City’s detail drawing No. 102-0. All work associated with the installation of all new, or replacement of existing, fire hydrant pavement markers shall be included as noted within the specifications.
314-4 APPLICATION OF TRAFFIC STRIPING AND CURB AND PAVEMENT MARKINGS.
314-4.1 General. – Add the following paragraphs:
During construction, if traffic legends or lane striping are removed or paved -over for any reason, they shall be replaced immediately with temporary traffic legends or lane striping as directed by the City, and the Contractor shall place permanent traffic legends or lane striping at the end of the job or on completion of final paving. When permanent items are placed, they shall be complete markings, legends, or striping i.e.: if limit lines are disturbed, they shall be replaced to centerline or from curb to curb, whichever was existing; if a letter in a word is removed or covered, the entire word shall be replaced; and lane striping shall extend 75 feet beyond construction limits. All replacement markings, legends, or striping required to be replaced beyond the c ontract limits shown shall be at the cost of the Contractor and shall meet City standards. If existing striping or legends are to be removed on existing surfaces, they shall be sandblasted. Painting over striping or legends in lieu of removal will not be permitted. Pavement striping shall comply with the applicable provisions of Sections 214 and 314 of the Standard Specifications.
Where side streets with existing striping, markings and markers are encountered, striping, markings and markers shall be repainted and replaced for a minimum distance of 15 m (50 feet) from the crosswalk, stop bar or limit line.
Redlands Regular Meeting of 02-06-24
580 of 857
GC 63
314-4.2 Control of Alignment and Layout.
314-4.2.1 General. - Delete and replace with the following:
The Contractor will be responsible for all layout of all striping. All striping, markings and markers shall be reinstalled in their existing locations unless otherwise shown on the plans. The Contractor shall be responsible to take appropriate measures and record the existing locations.
The Contractor shall verify all dimensions in the field prior to installation of pav ement striping/marking layout ( Cat-Track). Should field measurements differ from the plan, the Contractor shall immediately notify City staff. No Cat-Track marks shall be placed until discrepancies are resolved.
Cat-Track must be approved by City staff prior to the installation of perm anent pavement striping/marking. Contractor shall notify City staff a minimum of 24 hours prior to installation of permanent pavement striping/marking to allow for inspection and approval. If approval of Cat - Track is not obtained by the Contractor, all work required to correct the striping/marking will be at the expense of the Contractor
Cat-Track marks shall be made in chalk. Paint for the purpose of Cat-Track is prohibited. If paint is used, the Contractor must r emove the paint without damaging or visually deforming the pavement surface. If damage or visual deformity within the removal area occurs, in the opinion of City staff , the C ontractor shall grind and overlay the entire segment with no additional compensation. The area of the grind and overlay shall be as required by City staff and shall be a minimum of 0.10’ thickness.
All visible Cat-Track markings after the installation of the permanent striping/marking shall be removed without damage or visual deformity to the pavement surface. Any damage or visual deformity to the pavement shall be remedied as noted above.
314-4.3.5 Application. - Amend the first sentence in paragraph 8 as follows:
“Glass beads shall be applied at a rate of 0.6 to 0.8 kg of beads per liter (5 to 7 pounds of beads per gallon).”
314-6 GREEN BIKE LANE. Green bike lanes shall be installed per plan and conform to the technical specifications included within the contract documents and shall be Streetbond CL or approved equal.
Redlands Regular Meeting of 02-06-24
581 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
582 of 857
GENERAL REQUIREMENTS
Redlands Regular Meeting of 02-06-24
583 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
584 of 857
COORDINATION OF WORK 01110-1
SECTION 01110 COORDINATION OF WORK
PART ONE -- GENERAL
1.1 SEQUENCING OF WORK
The Contractor shall submit the co nstruction schedule in accordance with Section 0 1321 of the specifications. The order of work shall proceed with the exceptions as follows:
Area A → Area B → Area C → Area D
The Contractor shall coordinate with the City’s current constr uction projects suc h as w ater, sewer, etc. before scheduling any work in the streets. City’s intention is to pave the streets immediately after the replacement of the pipeline. Contractor may skip streets that are not ready for paving and schedule other st reets to work on. A lso, Contractor shall re -schedule the streets that are skipped for a later time. There will be no monetary compensation for re -scheduling the work, re-mobilization and/or loss of production.
The Contractor shall arrange the schedule of work, but it shall adhere to the following restrictions:
1. Paving and related work shall follow the timeline p er Section 302 -5.2 of the Specifications.
2. Citywide events calendar shall be considered with the construction schedule. Events calendar with specific dates will be provided during subsequent weekly construction meetings.
3. Construction around school zones shall be taken into consideration to avoid interference with the drop -off and pick -up time s for each specific school. School calendar with school start/dismissal times are included in the Appendix.
4. Only one area may have paving activity occurring at a time unless approved by City.
5. Any other construction activity other than paving shall be scheduled by the contractor in any sequence but shall be approved by the City.
1.2 UTILITY COORDINATION
During construction, if City owned utility facilities are damaged, contractor shall inform the City. City crew will respon d within two hours and assess the condition, and perform any necessary remedial work as quickly as possible. No additional compensation will be granted to the contractor fo r any delay due to the damage and repair of the utility facility.
Other utilities not owned by the City, contractor should notify and coordinate with the utility owner.
1.3 MAINTENANCE OF OPERATION OF EXISTING FACILITIES
Redlands Regular Meeting of 02-06-24
585 of 857
COORDINATION OF WORK 01110-2
Any shutdown will be coordinated with t he Owner. All valves on the Owne r’s existing facilities will be operated by the Owner. Written notice shall be given to the Owner’s Representative no less than 72-hours for residential areas and 12 days for commercial areas prior to the desired shut -off time. The Contractor shall be re sponsible for disposing of water drained from the existing pipelines.
1.4 COORDINATION SUBMITTALS
1. No water system shutdow ns will be allowed on Monday or Friday, unless otherwise directed by City staff.
2. When approved, City will begin shutting down the water sys tem to allow connection at 8:00 AM. Note the system drainage time may take up to two hours depending on location and field conditions.
END OF SECTION
Redlands Regular Meeting of 02-06-24
586 of 857
TRAFFIC CONTROL PLAN 01111-1
SECTION 01111 TRAFFIC CONTROL PLAN
A. General
The intent of this specification is to provide the format and requirements in preparation of the Traffic Control Plan (TCP).
B. Format
1. The sheets of the TCP shall display, at a minimum, the title of the project, name of firm preparing the TCP, name and stamp of Registered Traffic or Civil Engineer preparing the TCP, approval block for City of Redlands approval, north arrow, title sheet with an index of the sheets, sheet number, and total number of sheets.
2. The TCP shall be drawn to a 1 inch = 40 scale, or as otherwise approved by City staff, on common size sheets ranging from 8 -1/2 inches x 11 inches, 1 1 inches x 17 inches or 24 inches x 36 inches as determined appropriate based on work area.
3. TCP must be prepared and approved by a Registered Traffic or Civil Engineer in the State of California.
C. Requirements
The TCP shall contain the following items and scenarios of traffic control:
1. Resurfacing operations;
2. Variations to accommodate night work;
3. All required detours;
4. Provide 4 changeable message boards, Solartech MB2 -LR-1548 or approved equal, located throughout the project area to provide advance notification as work progresses;
5. The TCP shall be completed in conformance with Section 7-10.2.2.1 of the General Conditions and adhere to the following:
a. On street parking, where currently available, shall be open to the public outside of working hours; and
b. Shall b e completed in conformance with all additional requirements from permitting agencies, such as Caltrans.
END OF SECTION
Redlands Regular Meeting of 02-06-24
587 of 857
DESCRIPTION OF WORK 01112-1
SECTION 01112 DESCRIPTION OF WORK
PART ONE -- GENERAL
1.1 SUMMARY
A. The work to be done under this Contract includes the furnishing of project management, labor, materials, tools and equipment for the construction of the PMP 2023 Street Resurfacing Project for the City of Redlands, all in accordance with the Contract Documents.
B. The following contract drawings are made a part of these Contract Documents:
Title Sheet No.
Title Sheet & Vicinity Map 1
Index Map 2
General Notes and Details 3
Quantity Tables by Street Segments 4-6
Street Segments Layouts 7-12
1.2 GENERAL SCOPE OF WORK
A. Work In This Contract: Work in this Contract includes all labor, materials and equipment necessary for construction of PMP 2023 Street Resurfacing Project as noted on the Contract Drawings and all other Contract Documents and is summarized as follows:
1. The Work shall consist of resurfacing various streets throughout the City.
Resurfacing methods include , slurry sealing (Type II), pulverization and grind & overlay. Asphalt overlay will be the conventional asphalt. All necessary striping will be replaced. The scope of work also includes removal and replacement of curb & gutter, curb ramp, driveways and x-gutter as necessary; protecting in place all existin g utilities, trees, and public and private improvements; pavement striping and restriping; replacing destroyed survey monuments; disposing of excess soil and rock material and restoring all areas and improvements to pre - construction condition.
2. The Work sh all also consist o f furnishing and installing sewer pipe, fittings, manholes, and appurtenances; all traffic control (including furnishing and installing all arrowboards, barricades, signs, delineators, and flagmen); all utility location and verification ( excavating, exposing, and verifying top, bottom, and side of utility facilities); all pavement removal and disposal; all earthwork (including trenching, shoring, sloping, bedding, and backfilling including select imported material or select nati ve material ); compacting; protecting in place or removing and replacing all existing utilities, trees, and public and private improvements; replacing all asphalt concrete pavement; disposing of excess soil Redlands Regular Meeting of 02-06-24
588 of 857
DESCRIPTION OF WORK 01112-2
and rock material and restoring all areas and improvements to pre-construction conditions.
3. The Contractor shall, upon completion of the pipeline construction and appurtenances required herein, initially operate all components of the Contract Work furnished and installed by Contractor, and make any additional adjustments, corrections, repairs, replacements, and reconstructions necessary to provide the City with complete, correctly operating pipeline and appurtenances.
END OF SECTION
Redlands Regular Meeting of 02-06-24
589 of 857
MEASUREMENT AND PAYMENT 01200-1
SECTION 01200 MEASUREMENT AND PAYMENT
A. Work Listed in the Schedule of Work Items
1. The application for payment will be for a specific item based on the percentage completed or quantity installed. The percentage complete will be based on the value of the partially completed work relative to the value of the item when entirely completed and ready for service.
2. A retention of 5 % of the value of work completed will be withheld from progress payments. This retention amount will remain constant t hroughout the contract period, and will not be payable until the expiration of 35 days after the recordation of the Notice of Completion.
B. Work Not Listed in the Schedule of Work Items
The General Conditions and items in the General Requirements, and Specifications which are not listed in the schedule of work items of the bid form are, in general, applicable to more than one listed work item, and no separate work item is provided therefore. Include the cost of work not listed but necessary to complete the pr oject designated in the contract documents in the various listed work items of the bid form.
The bids for the work are intended to establish a total cost for the work in its entirety.
Should the Contractor feel that the cost for the work has not been establi shed by specific items in the bid form, include the cost for that work in some related bid item so that the proposal for the project reflects the total cost for completing the work in its entirety.
The Contractor may experience difficulty in excavation d ue to rock or unsuitable backfill material throughout the project locations. It shall be the Contractor’s responsibility to identify these areas and account for difficulty in excavation, the need to export rock or unsuitable backfill material and the need t o import suitable backfill material. There will not be additional contract time or additional compensation for any project locations where any of these circumstances occur.
C. Bid Items
1. Mobilization, Bid Item 1:
Payment for Mobilization shall be made at t he contract lump sum price and shall constitute full compensation for all labor, material, equipment, and incidentals required within Section 01721. The bid price shall include, but not limited to, preliminary construction schedule, bonds, insurance, installation and relocation of information signs, shop drawings, catalog submittals, identification & providing list of trees that needs to be trimmed at least four weeks prior to paving, and shall constitute full compensation for all labor, material, equipment and incidentals required . The bid price for mobilization shall not exceed 5 percent of the Bid Schedule total price.
Redlands Regular Meeting of 02-06-24
590 of 857
MEASUREMENT AND PAYMENT 01200-2
2. SWPPP, Bid Item 2:
Payment for Storm Water Pollution Prevention Plan (SWPPP) shall be made at the contract lump sum price and shall constitu te full compensation for preparation, approval, NPDES Permit and shall include all labor and incidentals noted within Section 01571.
Payment for the SWPPP shall be made based on the percentage of project completion to ensure compliance with all require ments. The completeness shall be determined by the Engineer and updated on progress payments.
3. Survey, Bid Item 3:
Payment for Survey shall be made at the contract lump sum price and shall constitute full compensation for research, construction surveying , construction staking, preparation and submittal of surveying cut sheets, tying existing control monuments that may be damaged or disturbed prior to construction, verifications of horizontal and vertical position of existing control monuments, recovery and reestablishment of damaged or disturbed control monuments after construction, preparation and submittal of corner records to applicable government agencies, provide recorded copies to the City and shall include all labor and incidentals noted within Section 01722.
Prior to construction, contractor shall provide corner records, survey monuments and any other existing survey control markers to the City for review. City Engineer/Surveyor will spot check the locations provided by the contractor’s surveyor. In a ny case, City shall back charge contractor for any missing survey markers or monuments.
Payment for the Survey shall be made based on the percentage of project completion to ensure compliance with all requirements throughout the duration of the contract . The completeness shall be determined by the Engineer and updated on progress payments.
4. Crack Seal/Fill and Slurry Seal (Type II), Bid Item 4:
Item includes but is not limited to crack filling, crack sealing, placement of leveling course, localized and isol ated base repair, depressed trench line repair, complete removal of existing striping and pavement markings, as well as per specification Section 302 of General Conditions. Payment for Type II Slurry Seal shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment, and incidentals required for Type II Slurry Seal placed. Payment shall be on a monthly basis and on total amount of Type II Slurry Seal placed per bid once streets are thoro ughly prepared per plans and specifications and accepted by the City staff.
5. 0.1’ Grind and 0.1’ AC Overlay, Bid Item 5:
Item includes but is not limited to 0.1’ grind and 0.1’overlay of asphalt concrete as specified on the project plans and specifications. Bid item also includes crack filling and crack sealing after grinding, routing of the surface following cold milling and prior to crack sealing, all weeds killing, placing leveling course, localized base repair, removal of existing asphalt over t he gutter pan (at least 1”) , removal of all temporary AC pavement and replacement with permanent base paving within the area of the proposed overlay. Bid item also include s but are not limited to dust control, traffic control, sawcutting and shall constitute full compensation for all labor, material, equipment and incidentals required as Redlands Regular Meeting of 02-06-24
591 of 857
MEASUREMENT AND PAYMENT 01200-3
required to perform the work under these bid items. Roadway grading and shaping shall conform to the provisions Section 300, 301 and 302 of the Standard Specifications.
Payment for this item shall be made at the contract unit price.
All grinding streets, contractor shall perform multiple spot repairs (various sizes) utilizing bid item 11. Contractor will identify and mark the locations in coordination with City staff and repair the pavement before paving. The repair area consists up to 5% of the paving area for a given street. City staff will direct the contractor to mark any additional area that needs to be repaired.
For the purpose of making monthly progress payments, 90% o f the contract unit price will be paid for the quantity of final pavement completed per the plans and specifications and to the satisfaction of the Engineer. The remaining 10% will be paid when all damaged traffic striping has been replaced per the plans an d specifications and has been accepted by the Engineer. No further breakdown will be allowed.
6. Pulverize Top 9" to place 2" AC over 9" FDR-200, Bid Item 6:
Item includes but is not limited to pulverizing the existing asphalt concrete pavement and base material to a depth of 6 -inch in place, removal of existing asphalt over the gutter pan (at least 1”), shaping of subgrade and removal of excess pulverized materials to make room for placing 2” conventional asphalt concrete overlay per plans and specifications. Roadway pulverizing, grading, and shaping shall conform to the provisions Section 300, 301 and 302 of the Standard Specifications. All manhole cover, fram e, valve lid covers shall be adjusted to finished grade following the street resurfacing.
Payment for roadway pulverize, grading and shaping, potholing, proof rolling, placement and compaction of subgrade to 95% relative compaction shall be made at the contract unit price and shall constitute full compensation for furnishing all labor, materials, tools, equipment, quality control, traffic control, dust control, and incidentals, and for doing all the work involved in roadway pulverizing per specifications. C ontractor shall report potholing information to the City at least a month before the construction.
7. Asphalt Concrete Paving, Bid Item 7:
Item includes but is not limited to the conventional asphalt concrete paving as specified on the project plans and specifications. Payment for asphalt concrete paving shall be made a t the contract unit price and shall constitute full compensation for furnishing all labor, materials, tools, equipment, quality control, traffic control, dust control, and incidentals, and for doing all the work involved in roadway paving per plans and specifications. Asphalt concrete materials of this bid item will be utilized for the bid item 6.
8. Leveling Course, Bid Item 8:
Item includes but is not limited to the leveling of the roadway surface with hot asphalt concrete pavement and per specif ication Section 302 of General Conditions. Leveling course shall be placed for any street that is determined by the City Staff before asphalt paving. Payment for this item shall be made at the contract unit price.
Redlands Regular Meeting of 02-06-24
592 of 857
MEASUREMENT AND PAYMENT 01200-4
9. R&R PCC Curb and Gutter, Bid Item 9:
Item includes but is not limited to the re -construction of existing but damaged, missing, and/or mis -aligned curb and/or curb and gutter. Curb shall be re -constructed per APWA Standard Plan 120 -2 Curb and Gutter - Barrier and shall join to existing. The height and width of the curb and gutter shall match the existing. Item also includes all necessary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under th is bid item.
Bid Item shall also include traffic control and mobilization. Approximate locat ions for curb and gutter replacement are shown on the plans. The actual locations shall be verified during construction.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, equipment and incidentals required.
10. Construct/R&R 6” AC Dike/Berm, Bid Item 10:
Item includes but is not limited to the construction, re-construction of existing but damaged, missing, and/or mis -aligned asphalt curb. Asphalt curb shall be constructed and/or re - constructed per APWA Standard Detail 120 -2 Curb and Gutter – Barrier and per APWA Standard Detail 121-2 Curb and Gutter - Mountable and shall join to existing. Asphalt curb running in front of a driveway shall be constructed as 4 -inch rolled curb. Item also includes all necessary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item. Bid Item shall also include traffic control and mobilization. Approximate locations for rock curb and gutter replacement are shown on the plans. The actual locations shall be verified during construction.
Payment for this ite m shall be made at the contract unit price and shall constitute full compensation for all labor, material, equipment and incidentals required.
11. R&R PCC Gutter Pan, Bid Item 11:
Item includes but is not limited to the re -construction of existing but damaged, missing, and/or mis-aligned PCC gutter pan. Gutter pan shall be re-constructed per APWA Standard Plan 120-2 Curb and Gutter - Barrier and shall join to existing. The width of the gutter pan shall match the existing adjacent gutter pan. Item also includes all necessary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under th is bid item. Bid Item shall also inclu de traffic control and mobilization. Approximate locations for gutter pan replacement are shown on the plans. The actual locations shall be verified during construction.
Payment for this item shall be made at the contract unit price and shall constitute fu ll compensation for all labor, material, equipment and incidentals required.
Redlands Regular Meeting of 02-06-24
593 of 857
MEASUREMENT AND PAYMENT 01200-5
12. Construct Cross Gutter w/ Spandrel, Bid Item 12:
Item includes but is not limited to earthwork, curb cuts and removals as required for the construction of new cross gutter per APW A Standard Detail 122 -2 and 123 -2. Existing concrete gutter and asphalt concrete shall be removed and replaced as necessary to allow installation. Also, 6-inch thick class 2 aggregate base shall be placed and compacted to 95% relative compaction under 8” t hick cross gutter and spandrels. Item also includes construction survey to form/construct cross gutter, all necessary dust control, clearing and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
13. R/R Driveway Approach, Bid Item 13:
Item includes but is not limited to the re -construction of existing concrete driveway approach. Driveway approach shall be re-constructed per APWA Standard Detail 110-2 and City of Redlands Standards and shall join to existing. Item also includes all necessar y dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item.
Payment for this item shall be made at the contract unit price and s hall constitute full compensation for all labor, material, traffic control, equipment and incidentals required
14. Adjust Manhole Ring/Cover w/ Concrete Collar, Bid Item 14:
Item includes but is not limited to adjustment of the manhole ring/cover, rim to the finished grade of the street . Manhole shall be re -constructed per City of Redlands Standard, A -101 and shall include the construction/reconstruction of the concrete collar per City of Redlands Standard, A -106. Item also includes all necessary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
15. Adjust Valve Can and Cover (Circular Lid), Bid Item 15:
Item includes but is not limited to adjustment of the valve can and cover to the finished grade of the s treet. Valve Can shall be re -constructed per City of Redlands Standard, A - 20514. Item also includes all necess ary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
Redlands Regular Meeting of 02-06-24
594 of 857
MEASUREMENT AND PAYMENT 01200-6
16. Replace Valve Can, Gate Well and Cover (Triangular Lid), Bid Item 16:
Items includes but is not limited to replacement of the valve can , gate well and cover per detail on Plan Sheet No. 3 and adjust valve cover to the finish ed grade of the street . This item includes all the triangular va lve lids, which are identified on the plan and any other found in the field during construction . Item also in cludes all necessary dust control, clearing, grubbing, and removals such as removals of vegetation, rubbish, and utilities as required for the construction of the proposed improvements under this bid item.
Payment for this item shall be made at the contra ct unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
17. Install Blue RPM, Bid Item 17:
Item includes but is not limited to installation of retro-reflective pavement markers (RPM) per plans and specifications. Where the fire hydrant is located at the intersection, blue RPM shall be installed on both street s. Payment for this it em shall be made at the contrac t unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
18. Replace Traffic Loop, Bid Item 18:
Item includes but is not limited to the re -installation of existing traffic signal loop detectors that have been damaged or removed as a result of resurfacing operations. Item also includes the home run where required , and upgrade existing stub -out or conduit in order to accommodate additional loops if required. All traffic loops shall be circul ar loops except adjacent to the crosswalks or stop bars. Type D loop shall be installed adjacent to the crosswalks or stop bars in each lane of each side of the intersection.
All Caltrans intersections, where Type D loop sha ll be installed, require the replacement of the detector sensor card (222) with a GTT922 detector sensor card per Caltrans permit condition or approved equal . Bid Item shall also include all labor, material, traffic control, equipment and incidentals . Payment for this item shall be made at the contract unit price and shall constitute full compensation for all lab or, material, equipment and incidentals required.
19. Thermoplastic STOP & Miscellaneous Legend, Bid Item 19:
Item includes but is not limited to inst allation of thermoplastic lettering per the California MUTCD and complete removal of existing striping and pavement markings . Bid Item shall also include traffic control and mobilization. A c omplete list of STOP legend, miscellaneous legend and pavement markings are provided in a table on Plan Sheet No. 3.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
20. 24” Thermoplastic Solid White/Yellow Stripe, Bid Item 20:
Item includes but is not limit ed to installation of 24” thermoplastic solid white/yellow striping, per project plans and per the California MUTCD and complete removal of existing striping and pavement markings . It includes stop bar, crosswalk, etc. Payment for this item Redlands Regular Meeting of 02-06-24
595 of 857
MEASUREMENT AND PAYMENT 01200-7
shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
21. 12” Thermoplastic Solid White/Yellow Stripe, Bid Item 21:
Item includes but is not limit ed to installation of 12” thermoplastic solid white/yellow striping, per project plans and per the California MUTCD and complete removal of existing striping and pavement markings . It includes stop bar, crosswalk, etc. Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
22. 8” Thermoplastic Solid White Stripe, Bid Item 22:
Item includes but is not limited to installation of 8” thermoplastic solid white stripe, per plans and per Caltrans 2015 Revised Standard Plan A20D and complete removal of existing striping and pavement markings. It includes turning pocket lanes, etc. Payment for this item shall be made at the cont ract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
23. 6” Thermoplastic Double Yellow Stripe, Bid Item 23:
Item includes but is not limited to installation of 6” thermoplastic double yellow stripe, per project plans and per Caltrans 2015 Revised Standard Plan A20A, D-22 and complete removal of existing striping and pavement markings. Payment for this item shall be made at the contract u nit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals require.
24. 6” Thermoplastic Solid White Stripe, Bid Item 24:
Item includes but is not limited to installation of 6” thermoplastic solid white stripe, per project plans and per Caltrans 2015 Revised Standard Plan A20B, D -27B and complete removal of existing striping and pavement markings. Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals require.
25. 6” Thermoplastic Skip White/Yellow Stripe, Bid Item 25:
Item includes but is not limited to installati on of 6” thermoplastic skip white/ yellow thermoplastic stripe, per project plans and per Caltrans 2015 Revised Standard Plan A20A , D-2 for centerlines; A20A, D-9 for lane lines ; A20D, D -39 and D -39A for bike lane line ; and complete removal of existing striping and pavement markings . Payment for this item shall be made a t the contract unit price and shall constitute fu ll compensation for all labor, material, traffic control, equipment and incidentals require.
26. 4” Thermoplastic Solid White/Yellow Stripe, Bid Item 26:
Item includes but is not limited to installation of 4” thermoplastic solid white/yellow stripe, per project plans and per Caltrans 2015 Revised Standard Plan A20B, D -27B for right edge line or D-24 for left edge line; A20D, D -39 and D -39A for bike lane line ; and complete Redlands Regular Meeting of 02-06-24
596 of 857
MEASUREMENT AND PAYMENT 01200-8
removal of existing striping and pavement markings. Payment for this item shall be made at the contract un it price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals require.
27. 4” Thermoplastic Skip White/Yellow Stripe, Bid Item 27:
Item includes but is not limited to installation of 4” thermoplastic skip white/yellow stripe, per project plans and per Caltrans 2015 Revised Standard Plan A20B, D -27B for right edge line or D -24 for left edge line; A20D, D-39 and D -39A for bike lane line ; and complete removal of existing striping and pavement markings. Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals require.
28. Green Bike Lane, Bid Item 28:
Payment for the Green Bike Lane shall be made at the unit price denoted within the proposal and shall include surface preparation, layout, material placement, curing, protection, and all labor, materials, tools, etc. to install the markings within the bike lanes per plans and specifications by painting a solid “Bike Path Green” using Streetbond CL or approved equal.
29. Export Roadway Materials, Bid Item 29:
All excessive pulverized materials removed shall be hauled away from the project site on the same working day and legall y disposed of and/or recycled at a site where contractor is responsible. The excess material will be generated due to pulveriz ing and reshaping th e street and the street has h igher existing crown including subbase or subgrade materials. All the streets may have export materials in order to meet the maximum cross slope of 3%.
Contractor shall determine the export quantity for any street segments duri ng construction.
Payment for this item shall be made at the contract unit price and shall constitute full compensation for all labor, material, traffic control, equipment and incidentals required.
30. Unforeseen work not covered within all other bid items, Bid Item 30:
Payment for the unforeseen work not covered within all other bid items shall be made at the contract price per lump sum (LS) and shall constitute full compensation for all labor, materials, equipment, and incidentals required. Unforeseen work must be approved by the City staff before doing any work and pay estimate shall be negotiated based on unit price already established with the bid proposal for this project. Any required work that is outside of the proposed bid unit cost, shall be pe rformed based on the Time and Material (T&M) basis and T&M cost shall be negotiated and approved by the City staff prio r to performing the work. Unforeseen work will be paid in each billing cycle with a percentage of the lump sum cost included in the bid. This item may not be spent entirely.
Redlands Regular Meeting of 02-06-24
597 of 857
MEASUREMENT AND PAYMENT 01200-9
31. Demobilization, Bid Item 31:
Payment for Dem obilization sha ll be made at the contr act lump sum price and shall constitute full compensation for all labor, material, equipment, and incidentals required within Section 01740.
END OF SECTION
Redlands Regular Meeting of 02-06-24
598 of 857
CHANGE ORDER REQUESTS 01251-1
SECTION 01251 CHANGE ORDER REQUESTS
1.1 GENERAL
A. All quotations for preliminary change orders for extras, changes, additions, or deletions to the Work as described in EXTRA WORK of the GENERAL CONDITIONS shall be submitted to the ENGINEER, in writing, on the Change Order Request (COR) Cover Sheet and the Change Order Cost Summary Form
, both attached, and in conformance with the
requirements of Section 01254 CHANGE ORDERS. The quotation shall be firm for a period of not less than sixty (60) calendar days from the date of receipt of the quotation by the ENGINEER. The CONTRACTOR shall submit its written cost quotation and Time Impact Analysis not later than fifteen (15) days after being requested to provide such quotation, unless the ENGINEER allows more time. Delays in submitting quotations beyond the fifteen (15) days set forth herein, which cause a delay in the issuance of a Change Order or a delay to the completion date of the project, shall not be cause for a claim or a time extension under the Contract.
B. The ENGINEER'S request for quotation on a preliminary change shall not be considered authorization to proceed with the changed work prior to the issuance of a final Lump Sum or Time & Material Change Order, unless directed otherwise, in writing, by the ENGINEER, nor shall such request constitute justification for a delay to the existing Work or a time extension under the Contract.
END OF SECTION
Redlands Regular Meeting of 02-06-24
599 of 857
CHANGE ORDER REQUESTS 01251-2
Redlands Regular Meeting of 02-06-24
600 of 857
CHANGE ORDER REQUESTS 01251-3
Change Order Cost Summary
Project Name :
Change Order Request No. :
Date :
Direct
Labor
Direct
Materials
Direct
Equipment
(1): Lump Sum Work by $0.00 $0.00 $0.00
Prime Contractor
(2): "T&M" Work by $0.00 $0.00 $0.00
Prime Contractor
(3): Subtotal - Direct Work $0.00 $0.00 $0.00
(Prime Contractor)
(4): All Lump Sum Work by $0.00 $0.00 $0.00
subcontractors (any tier)
(5): All "T&M" Work by $0.00 $0.00 $0.00
subcontractors (any tier) Totals
(6): Subtotal - Direct Work $0.00 $0.00 $0.00
$0.00
(all subcontractors)
Add each of the
(3)+(6)=(7): Total - Direct Costs $0.00 $0.00 $0.00
three columns
$0.00
across and enter
to the right.
(8): Markup
(20%
of
direct
labor)
(15% of
direct mat'l)
(15% of
direct equip)
$0.00 $0.00 $0.00 $0.00
(9): Prime Contractor
Markup 10% of line (6) direct sub work up to $5,000
for subcontractors plus 5% of line (6) direct sub work over $5,000
(10): Bonds & Insurance 1% of line (7)
$0.00
all direct work
(11): Additional amount
permitted by Contract
(12): GRAND TOTAL Add sums of lines)
$0.00
(7), (8), (9), (10) and (11)
Redlands Regular Meeting of 02-06-24
601 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
602 of 857
CHANGE ORDERS 01254-1
SECTION 01254 CHANGE ORDERS
PART ONE -- GENERAL
1.1 REQUIREMENTS
Payment to the Contractor, or credit to the City, for any change, addition, deletion or extra to the Work, or settlement of any Claim, covered by any Change Order, shall be determined by the methods set forth herein. The Engineer may change the Plans and Specifications, character of the Work, or quantity of Work provided the total arithmetic dollar value of all such changes, both additive and deductive, does not exceed twenty-five percent (25%) of the Contract Price. Should it become necessary to exceed this limitation, the change shall be by written Supplemental Agreement between the Contractor and the City, which shall be executed by a Change Order.
Unless otherwise stipulated, “Unit Prices” include all costs necessary to furnish, install and complete the Work. The “Unit Prices” include all direct costs for labor, equipment and materials, all insurance and bond costs, all field and office supervisors and assistants, all onsite project administration, security costs, the cost of small tools and consumables, incidental job burdens, and all general home office expenses and no separate allowance will be made therefor. Assistants to field and office supervisors include all clerical, stenographic, and general office help. Incidental job burdens include, but is not limited to, office equipment and supplies, temporary toilets, telephone, utilities, safety equipment, warning devices, personal protective equipment, and conformance to OSHA requirements. Project administration includes, but is not limited to, review and coordination, estimating, engineering, scheduling, and expediting relative to Change Orders, and updating and furnishing Record Drawings to incorporate changes, schedule update, supervision not applied solely to the Work of the Change Order, home office salaries and expenses, and City of Redlands
Business Tax.
A. Unit Prices
Unit prices stipulated in the Bid or itemized in the approved Schedule of Values shall be utilized, where they are applicable and determined reasonable by the Engineer. In the event that the Change Order results in a change in the original quantity of more than twenty-five percent (25%), either increase or decrease, then either the Engineer or the Contractor may request a review of the unit price to determine if a new unit price shall be mutually determined by negotiation. Any new unit price mutually determined under this Subsection shall only apply to the units in excess of one hundred twenty five percent (125%) of the original quantity for overruns. In case of underruns, the unit price stipulated in the Bid shall be applied to the first twenty-five percent (25%) of the actual quantity of work performed and the new mutually determined price shall be applied to the quantity between twenty-five percent (25%) and seventy-five percent (75%) of the original quantity.
Redlands Regular Meeting of 02-06-24
603 of 857
CHANGE ORDERS 01254-2
Renegotiated unit prices or unit prices for new items added to the Contract by Change Order shall be determined in accordance with Subsections B through G.
Whether stipulated in the Bid, itemized in the approved Schedule of Values or renegotiated, the unit prices used for payment constitute the total adjustment with no further costs owed for overhead, impact, profit, delay or impact to unchanged portions of the Contract, or any other reason. The unit price shall be full and final compensation as described in Subsection D.
The cost proposals for renegotiated unit prices shall be presented in accordance with the provisions of Subsections B through G. Should any Bid Item be deleted in its entirety, the amount bid for that bid item shall be subtracted from the total Contract amount. The Contractor shall be paid only for the actual cost incurred prior to the notification of such deletion for that Bid Item.
B. Lump Sum
The Engineer and the Contractor may mutually determine a total sum for the Extra Work. The Contractor shall summarize the total cost and furnish a breakdown of the proposed lump sum costs satisfactory to the Engineer in accordance with Subsections B through G. Such lump sum costs shall be full and final compensation as described in Subsection D. The Contractor’s quotation shall conform to the requirements of Section 01251- Change Order Requests, and be submitted in the Change Order Cost Summary Form provided (see Attachment 01251
-A1). The Change Order Cost Summary Form cannot be used to nullify or supercede any specification or contractual provision.
If the method or amount of payment cannot be agreed prior to performing the Extra Work, the Engineer may unilaterally issue a Change Order in the amount determined reasonable by the Engineer for the Extra Work and direct the Contractor to proceed immediately. The Engineer also has the option to issue a Change Order directing the Work be done on a Time and Materials basis with the Contractor providing all labor, equipment, and materials necessary to complete the Work in a satisfactory manner and within a reasonable period of time.
Estimates for lump sum quotations and accounting for Time and Materials work shall be limited to direct expenditures necessitated specifically by the subject Extra Work, and shall be segregated as follows:
1. Labor, up to and including working general foremen, who are directly assigned to the Extra Work. Employees identified as superintendents or non-working general foremen shall not be charged as labor on Extra Work.
The labor costs shall include actual documented payroll costs including wages, payroll taxes as established by law (i.e., FICA, Federal and State Unemployment Taxes), fringe benefits as established by negotiated labor agreements, and any insurance costs (such as Worker's Compensation and General Liability Insurance but shall not include Automobile Liability Insurance or any other insurance costs) . A detailed breakdown of those Redlands Regular Meeting of 02-06-24
604 of 857
CHANGE ORDERS 01254-3
subcomponents of labor costs, by all crafts shall be submitted to the Engineer, by the Contractor and all Subcontractors, for approval, as part of the documentation of labor costs, within ten (10) working days after issuance of the Notice to Proceed. No other subcomponents of labor costs shall be considered, unless approved in writing by the Engineer.
The labor cost is not allowed to be increased by using labor classifications with paygrades higher than necessary to accomplish the Work.
2. Materials: The cost of materials used in performing the Extra Work will be the cost, including sales tax and freight, to the purchaser, whether Contractor, Subcontractor or other forces, from the supplier thereof, except as follows:
a. Cash or trade discounts available to the purchaser shall be credited to the City notwithstanding the fact that such discounts may not have been taken by the Contractor.
b.
For materials secured by other than a direct purchase and direct billing to the purchaser, the cost shall be deemed to be the pri ce paid to the actual supplier as determined by the Engineer. Supplier markup, except for actual costs incurred in the handling of such materials, will not be allowed.
c. Payment for materials from sources owned wholly or in part by the purchaser shall not exceed the price paid by the purchaser for similar materials from said sources on contract items or the current wholesale price for such materials delivered to the Jobsite, whichever price is lower.
d.
If, in the opinion of the Engineer, the cost of materials is excessive, or the Contractor does not furnish satisfactory evidence of the cost of such materials, then the cost shall be deemed to be the lowest current wholesale price for the quantity concerned, delivered to the Jobsite less cash or trade discount. The City reserves the right to furnish materials for the Work and no claim shall be made by the Contractor for costs and profit on such materials.
e. For the purposes of this Section, a "Supplier" is defined as any person or persons, firm or business, who supplies materials of construction and/or permanent equipment, but who does not perform any portion of the Work of the Contract on site, for the Contractor, except that labor or labor supervision which may be required by some manufacturers as part of their equipment installation for warranty or other purposes.
Redlands Regular Meeting of 02-06-24
605 of 857
CHANGE ORDERS 01254-4
3. Equipment Costs, including ownership, lease or rental costs, as well as operating costs, for individual equipment units whose replacement value is in excess of $500. Transportation and set up costs shall be included, but only if the equipment is imported to the worksite solely to perform work on the Extra Work described in the Change Order and the Contractor can demonstrate that the changed work cannot or could not be performed economically with equipment already at the site. Equipment costs shall be determined in accordance with the requirements set forth in Subsection G.
4. Small tools, equipment, consumables and incidental costs: No separate payment will be made for the use of small tools or equipment with a replacement value of $500 or less. This applies to tools and equipment owned by the Contractor or its subcontractors of any tier. Also, no separate payment will be made for fuel, lubricants, tool or equipment repairs, tool or equipment maintenance, consumables, drinking water, sanitary facilities or other incidentals. These costs are already included as a part of Markup.
5. Subcontractor Costs, including their overhead and profit, provided that such costs are direct costs to the Contractor for performing the Extra Work as set forth in Subsections B through G.
C. Time and Materials Work
The costs of all Changed/Extra Work submitted under the Time and Materials (T&M) method shall be formulated in accordance with the provisions of Subsections B through I.
Unless otherwise stipulated on the Change Order, the “Not -to-Exceed” amount for all T&M Change Orders is $10000
. The Contractor is responsible for tracking
costs and for notifying the Engineer in writing when costs approach 50% and 75% of the “Not-to-Exceed” amount. In addition, if the Changed/Extra Work cannot be completed within the “Not -to-Exceed” limit, the Contractor shall notify the Engineer in writing, and in a timely manner, that the limit requires an increase.
The City will only reimburse eligible costs up to the “Not-to-Exceed” amount.
The Contractor shall notify the Inspector at the beginning of each day when Changed/Extra Work is being performed. The Contractor shall notify the Inspector of the Changed/Extra Work being performed and describe the personnel involved, whether by Contractor forces or by its subcontractors at any tier. Failure to notify the Inspector prior to the start of Changed/Extra Work serves as the Contractor’s waiver to claim for compensation on that day.
For each working da y, the Contractor shall submit a “Daily Extra Work Report ”
(DEWR) to the Inspector. The “Daily Extra Work Report” shall summarize labor, Redlands Regular Meeting of 02-06-24
606 of 857
CHANGE ORDERS 01254-5
equipment and materials supplied. The Inspector will only consider Forms that are properly completed as described below.
1. Separate forms must be used for labor and for equipment/materials.
2. Labor, equipment, material or expenditures that are not included on The DEWR are ineligible for payment. There will be no exceptions to this requirement. It is the responsibility of the Contractor to include any and all items of labor, equipment, or material for which it requests compensation for each day’s work completed.
3. Information required on the Labor form shall include name of personnel, personnel classification, and only the number of hours worked on Changed/Extra work for the day being reported. Since the overhead allowance already includes all necessary supervision, any hours for additional supervision or non-working foremen are ineligible for additional payment. The premium pay for a general foreman is eligible for payment only if the general foreman is a working foreman and a general foreman was required by a Union Labor Agreement or otherwise approved by the Inspector. The general foreman rate is eligible for payment only du
ring the time that a general foreman was required for the Changed/Extra Work.
4. Information required on the Equipment/Material shall include Contractor- owned equipment and/or tools, and rented equipment or tools for which compensation is requested. Information shall include the type of equipment, size of equipment, equipment identification number, appurtenances, and only the number of hours worked on the Changed/Extra work.
5. The only allowable materials are materials delivered to the job site and/or incorporated only into the Changed/Extra work. The allowable materials shall be listed on the T&M sheet for the day that they are delivered to the job site and/or incorporated into the Changed/Extra work.
6. Delivery ticket(s) and/or bill(s) of lading for rental equipment and/or tools delivered to the site and/or material incorporated into the work for the day being reported must be attached with the T&M sheet for that day. No payment will be allowed for materials and/or rented equipment unless receipt(s) or bill(s) of lading is attached. If the request for payment is not substantiated by original vendor/supplier invoices, acceptable copies of original invoices, or other documentation acceptable to the Inspector, the City may establish the cost of the item(s) at the lowest possible wholesale price or rental rate applicable while the work was being performed.
Redlands Regular Meeting of 02-06-24
607 of 857
CHANGE ORDERS 01254-6
7. Failure to submit the required “Daily Extra Work Report of Time and Material Work” by the close of the next working day shall waive all rights for that day unless otherwise approved by the Inspector. Work that cannot be substantiated by a “Daily Report”, approved and signed by the Inspector, is ineligible for payment.
8. The Contractor is responsible for preparing the “Daily Extra Work Report” for work by its Subcon tractors and submitting the Forms to the Inspector on time.
9. The Contractor must have each “Daily Extra Work Report” verified by the Inspector. After the “Daily Extra Work Report” is approved by the Inspector, both the Contractor and Inspector sign the report. The original “Daily Extra Work Report” is retained by the Inspector with a copy provided to the Contractor.
10. When the “Daily Extra Work Report” is signed by the Inspector and the Contractor, it is binding on the Contractor and its Subcontractors.
11. When agreed to by the Inspector, the Contractor may submit a supplemental “Daily Extra Work Report” for labor, materials, or equipment for which the Contractor requests compensation but failed to list on the original daily report.
a. These supplemental forms shall be marked “SUPPLEMENTAL”.
b.
Unless otherwise approved by the Inspector, the supplemental forms may only be submitted for approval up to two (2) working days following the date when the work was performed.
No payment will be allowed for labor, materials, or equipment included on T&M sheets not signed by the Contractor and the Inspector. Payment will not be allowed for labor, materials, or equipment included on T&M sheets signed by anyone other than the Inspector or the Inspector’s immediate supervisor.
D. General
It is the intent of the City to settle all Change Orders full and final at the time the Change Order is issued. Therefore, the following paragraph shall be made a part of
all Change Orders, whether included or not on the actual change order:
“The compensation (time and cost) set forth in a Change Order comprises the total compensation due the Contractor, all Subcontractors, and all Suppliers, for the Work or change defined in the Change Order, including impact on unchanged work. By signing the Change Order, the Contractor acknowledges and agrees on behalf of himself, all Subcontractors, and all Redlands Regular Meeting of 02-06-24
608 of 857
CHANGE ORDERS 01254-7
Suppliers, that the stipulated compensation includes payment for all work contained in the Change Order, plus all payment for the interruption of schedules, extended field overhead costs, delay, and all impact, ripple effect or cumulative impact on all other work under this Contract. The signing of the Change Order indicates that the Change Order constitutes full mutual accord and satisfaction for the change, and that the time and/or cost under the Change Order constitutes the total equitable adjustment owed the Contractor, all Subcontractors, and all Suppliers as a result of the change. The Contractor, on behalf of himself, all subcontractors, and all Suppliers, agrees to waive all rights, without exception or reservation of any kind whatsoever, to file any further claim related to this Change Order.
No further claim or request for equitable adjustment of any type for any reasonably foreseeable cause shall arise out of or as a result of this Change Order or the impact of this Change Order on the remainder of the Work under this Contract.”
Costs which shall not be paid in Change Orders under this Contract include, but are not limited to, interest costs of any type; claim preparation or filing costs; legal expenses; the costs of preparing or reviewing proposed Change Orders or Change Order proposals; lost revenue; lost profits; lost income or earnings; rescheduling costs; costs of idled equipment when such equipment is not at the site or has not yet been employed on the Work; lost earnings or interest on unpaid retainage; claims consulting costs; and the costs of corporate officer or staff visiting the site; any compensation due to the fluctuation of foreign currency conversion or exchange rates; loss of other business; changes in taxes or increased tax rates of any kind or any costs identified as unallowable under the provisions of the Federal Acquisition Regulations.
Extensions of time shall be based solely upon the effect of delays to the Work as a whole. Extensions of time shall not be granted for delays to the Work, unless the Contractor can clearly demonstrate, through analysis of the current updated schedule, that the delay to the Work as a whole arose or will arise from causes other than normal weather, beyond the control and without fault or negligence of the Contractor, or any Subcontractor, at any tier, and that such delays did or will, in fact, delay the progress of the Work as a whole. The Contractor shall not be entitled to a time extension unless it submits a Time Impact Analysis which is a calculation of the extent of the delay to the end date of the Work and which shows that the Work has been or will be extended beyond the current Contract completion date. A Time Impact Analysis is a scheduling procedure which utilizes the networking techniques (fragnets) and a written analysis of the facts associated with the alleged delay to demonstrate the effect of the alleged delay on the critical path of the schedule. A "fragnet" is defined as a sequence of new activities and/or activity revisions that are proposed to be added to the existing current updated schedule to demonstrate (mathematically and graphically) the influence of the alleged delay on the end date of the Work and shall be the sole method for incorporating delays and impacts into the schedule. The objective of a Redlands Regular Meeting of 02-06-24
609 of 857
CHANGE ORDERS 01254-8
Time Impact Analysis is to pinpoint, isolate, and quantify all time impact associated with a specific issue and determine its time relationship to past or current delays. Time extensions shall not be allowed for delays to parts of the Work that are not on the critical path of the currently approved monthly updated project schedule. Time extensions shall not be granted, nor delay damages of any kind whatsoever paid to the Contractor, until all available float, slack, or contingency time on the project is used and the end date of the Work is moved beyond the current, adjusted Contract completion date.
The cost summary, cost breakdowns and requests for cost reimbursement submitted by the Contractor (for delay, disruption, hindrance and interference associated with the changes, additions, deletions or extras) shall be itemized in a manner that, with mathematical certainty and without reliance upon probabilities or inferences, segregates the direct, actual reimbursable costs associated with each individual, change, addition, deletion, extra and (on an event- by-event basis) each individual delay or disruption event. Such cost summaries, breakdowns or requests shall not be based, in whole or in part, upon any methodology (such as “total cost” or “modified total cost” methodologies) that purports to calculate the Contractor’s additional costs of performance of the extra, change, addition or deletion (including without limitation the additional costs of delay, disruption or other impact) based on the difference between Contractor’s total actual Project or line item costs (with or without fee) and its original bid estimate for the Project or any original bid estimate line item. In connection with the foregoing, Contractor represents and warrants that it has the ability to generate and maintain complete and accurate cost accounting records that will reflect (i) the actual costs incurred or saved for each individual item of Extra Work, change, addition, deletion (including without limitation any costs of associated delay, disruption, interference, hindrance and the cumulative impact of each extra, change, addition, deletion on other parts of the Work); and, (ii) on an event- by-event basis, the effect of each delay or disruption that forms the basis of each request for extension of time, regardless of their scope, number, complexity, cumulative effect, or time of issuance or occurrence.
Except as provided in Section 6-6 of the General Conditions, Contractor shall have no right to recovery of any compensation, costs, expenses or damages resulting from delay, disruption, interference, or hindrance in the performance of the Work (including without limitation interruption of schedules, excess or extraordinary extended field and indirect overhead costs, loss of productivity and the impact, ripple or cumulative effect on other Work).
Contractor waives any claim or rights and remedies based on abandonment, quantum merit, rescission or other similar legal theory by reason of any of the following circumstances, which the Contractor acknowledges and agrees are within the reasonable contemplation of the parties: (i) changes, additions, deletions and extras to the Work after execution of the Contract and issued from time to time throughout the period of construction, regardless of their scope, Redlands Regular Meeting of 02-06-24
610 of 857
CHANGE ORDERS 01254-9
number, cumulative value, or complexity, to correct errors, omissions, conflicts, and ambiguities in the Contract Documents, or to implement discretionary changes to the scope of Work requested by the City; (ii) the issuance and performance of changes, additions, deletions and extras in a manner that is not in sequence with the as-built or as-planned progress of the Work; (iii) changes due to Differing Site Conditions; (iv) suspensions of the Work or parts thereof, or limitations on access to portions or all of the Work, for the convenience of City or in the interests of the Project; (v) delay or disruption to the Work due to failure of the City, Engineer or Inspector to timely perform any contractual obligation.
E. Markups –
Overhead and Profit
1. In addition to the direct expenditures specified for labor, materials and equipment in Subsection B, a lump sum will be paid for all overhead and profit, including: All insurance costs other than specifically mentioned in this Section, all field and office supervisors and assistants, all onsite project administration, security costs, the cost of small tools and consumables, incidental job burdens, and all general home office expenses and no separate allowance will be made therefor. Assistants to field and office supervisors include all clerical, stenographic, and general office help. Incidental job burdens include, but is not limited to, office equipment
and supplies, temporary toilets, telephone, utilities, safety equipment, warning devices, personal protective equipment, and conformance to OSHA requirements. Project administration includes, but are not limited to, review and coordination, estimating, engineering, scheduling, and expediting relative to Change Orders, and updating and furnishing Record Drawings to incorporate changes, schedule update, supervision not applied solely to the Work of the Change Order, home office salaries and expenses, and City of Redlands
Business Tax. Such lump sum shall conform to the
following schedule of percentages of the total amount of direct expenditures of the Contractor and subcontractors.
(a) Work by Contractor.
The following percentages shall be added to the
Contractor’s costs and shall constitute the markup for all overhead and profits:
1) Direct Labor 20%
2) Direct Materials 15%
3) Direct Equipment 15%
(b) Work by Subcontractor. When all or any part of the extra work is performed by a Subcontractor, the markup established in (a) shall be applied to the Subcontractor’s actual cost of such work. A markup of 10 percent on the first $5,000 of the subcontracted portion of the extra work and a markup of 5 percent on work added in excess of $5,000 of the subcontracted portion of the extra work may be added by the Contractor.
Redlands Regular Meeting of 02-06-24
611 of 857
CHANGE ORDERS 01254-10
2. Bonds and Insurance
An additional allowance of one percent (1%) of all direct costs (less markup) is allowed.
3. Add/ Deduct Changes
The overhead rates determined above shall be applied to all additive Change Orders, except those utilizing as-bid Unit Prices listed in the Bid Proposal.
Any change in the Work involving both extras and credits shall show a net total cost, including subcontracts. Allowances for overhead and profit to the net total cost, as specified herein above, shall be applied if the net total cost is an extra; overhead and profit allowances shall not be applied if the net total cost is a credit. The estimated cost of deductions shall be based on labor and material prices on the date the Contract was signed.
4. When all or any part of the extra work is performed by a Subcontractor, the markup established in subsection 1.1.E.1 shall be applied to the Subcontractor’s actual cost of such work. A markup of 10 percent on the first $5,000 of the subcontracted portion of the extra work and a markup of 5 percent on work added in excess of $5,000 of the subcontracted portion of the extra work may be added by the Contractor.
F. City Furnished Materials, Equipment and Services
The Engineer reserves the right to furnish materials, equipment and services deemed expedient for use on the Changed/Extra Work. The Contractor shall have no claim for profit or overhead on the cost of such materials, equipment and services.
G. Equipment Costs
The rates for rental or leased equipment shall not exceed the rates listed in the Caltrans Labor Surcharge and Equipment Rental Rates
(Caltrans LS&ERR). For
T&M Change Orders, the rates are established by the actual paid invoice(s) that comply with the requirements of Subsections G.1 and G.3. Owned equipment costs shall not exceed the rates established by Subsection G.2. The most recent published edition in effect at the commencement of actual equipment use shall be used.
The rates paid for any rented or leased equipment or tools shall include the cost of fuel, oil, lubrication, supplies, small tools, necessary attachments, repairs and maintenance of any kind, depreciation, storage, insurance and all incidental costs associated with the operation of the equipment or tools.
Redlands Regular Meeting of 02-06-24
612 of 857
CHANGE ORDERS 01254-11
It is the responsibility of the Contractor to include any appurtenances added to equipment which would increase the basic rate for said equipment (i.e., hoe-ram, oversize bucket, and etcetera) as established in the acceptable rental rate guide.
All equipment and/ or tools shall be acceptable to the Inspector, in good working condition, suitable for the purpose for which it is to be used, and necessary to complete the Changed/Extra Work. Payment will be based on the manner in which the equipment was actually powered, operated and modified per the equipment manufacturer’s recommendations.
1. Rented or Leased Equipment
For equipment rented or leased (including lease with purchase option) in arm's length transactions from outside vendors, the Contractor shall be paid the actual invoiced, rented or leased rates provided that the invoiced lease or rental rates do not exceed the rates set forth in the Caltrans LS&ERR. Arm's length rental or lease transactions are those in which the firm involved in rental or lease of such equipment is not associated with, owned by, have common management, directorship, facilities, or stockholders with the firm renting the equipment. Submittal by a Contractor of a rental or leased invoice from the lessor will be prima facie proof of compliance with the above. However, such invoices are not conclusive proof; if questioned, the burden of proof remains with the Contractor. In no event shall the leased equipment rate billed to the City be at rates exceeding those prescribed in the following table:
Actual Usage (Change Order
& Contract Work Combined) Payment Category
Less than 8 hours Hourly Rate
8 or more hours but less than 7 days Daily Rate
7 or more days but less than 30 days Weekly Rate
30 calendar days or more Monthly Rate
a. When in Use:
Actual equipment use time documented by the Inspector shall be the basis that the equipment was utilized on the changed work and paid for under the Change Order. In addition to the lease or rental rate, equipment-operating costs shall not exceed the estimated hourly operating rate as set forth in the Caltrans LS&ERR. The hours of operation shall be based upon actual equipment usage on the changed work as recorded by the Inspector. For multiple shift work sequences, the allowable equipment rate shall not exceed fifty percent (50%) of the base rate, for second or third shifts.
b.
When Idle:
Redlands Regular Meeting of 02-06-24
613 of 857
CHANGE ORDERS 01254-12
Idle equipment is equipment on site and necessary to perform the Work under the change but not in actual use due solely to the im
pact of the changed work. Equipment operating costs due to idle time, documented by the Inspector, shall be paid at the rate determined in “G” (1) above. Idle time shall include a reasonable time allowance to and from the project site.
Payment for equipment or tools shall be limited to hours actually worked on the Changed/Extra Work if the equipment or tool is already on site for Work under the original Contract. No “standby” time will be paid for equipment already on site for Work under the original Contract.
If equipment or tools are used intermittently and, when not in use, could be returned to the rental source at less expense than holding it at the work site, it shall be returned, unless the Contractor elects to keep it at the work site at no expense to the City.
2. Owned and Other Equipment
Equipment rates for owned equipment or equipment provided in other than arm's length transactions shall not exceed the total hourly costs as set forth in the Calt rans “Labor Surcharge and Equipment Rental Rates” effective at the time the work is performed. (The Caltrans equipment rental rates are available on the internet at
http://www.dot.ca.gov/hq/construc/equipmnt.html
.) If the equipment is
not listed in Caltrans LS&ERR, then the Rental Rate Blue Book shall be used. When using the Blue Book, the hourly rate for any period less than 7 days shall be the weekly rate divided by 40, plus the Operating Cost.
Except as noted herein below, this equipment hourly rate plus the estimated operating cost per hour from the Blue Book will be paid for each hour the equipment actually performs the Extra Work. Daily records listing the equipment units and their respective operators, identification code, and actual usage on the Work under the Change Order, as certified at the end of each work day (or work shift if the Work is being performed in multiple work shift sequence) by the Inspector shall be the record upon which actual equipment use shall be based. For multiple shift work sequences, the Caltrans overtime factor shall be applied (When using the Blue Book one-half the Non-Operating Cost will be deducted for second and third shifts. The Non-Operating Costs are the Blue Book monthly or weekly/40 rates, as applicable.). It is agreed that this rate shall represent payment in full for all the Contractor’s direct costs.
a. When Idle:
Redlands Regular Meeting of 02-06-24
614 of 857
CHANGE ORDERS 01254-13
Payment for equipment necessary to be on the site to complete the Work, but not in actual use due solely to the impact of the changed work, shall be paid per the table in Caltrans Standard
Specifications Section 9-1.03A(3b), provided that its presence and necessity on the site has been documented by the Inspector, and further provided that the equipment was idled solely by actions of the City. Idle equipment time will only be paid as a function of delays specifically directed or caused by the City's actions. In no event shall the idle time claimed in a day for a particular piece of equipment exceed the normal work schedule established for the project - usually eight (8) hours per day or forty (40) hours per week, and excluding Saturdays, Sundays, and holidays. For multiple shift work sequence, the allowable idle equipment rate shall not be allowed, for second or third shifts. It is agreed that this rate shall represent payment in full for all the Contractor’s direct costs.
3. Equipment Haulage and Set Up Costs
Documented and actual equipment haulage and set up costs shall be paid for, if applicable as set forth in Subsection B.3.
4. Other Equipment Cost Guides
In the event that a piece of equipment used on a Change Order is not listed in Caltrans or the Blue Book, costs may be derived from the Associated General Contractor’s of America Equipment Ownership Guide, the Associated Equipment Dealers Guide, or the Equipment Rate Guide published by the U.S. Army Corps of Engineers as adjusted appropriately for the type of work and use and the regional area of the Work under this Contract.
H. Records
At any time should the Contractor deviate substantially from the schedule, method and sequence of operation, equipment, cost or pricing data furnished by the Contractor and agreed to by the City in connection with the Change Order or should the City determine that any price negotiated in connection with the Change Order is defective due to such deviation or the fault of the Contractor, the City reserves the right to reduce the Change Order cost and reissue the Change Order at the amount in which the City determines to be the actual costs to complete the change.
Whenever any material or process is indicated or specified by patent or a proprietary name, or by name of a manufacturer in the Change Order, such direction shall not relieve the Contractor’s responsibility or obligation to perform Redlands Regular Meeting of 02-06-24
615 of 857
CHANGE ORDERS 01254-14
work in accordance with the contract requirements. The Contractor shall be solely responsible for, and have control over construction means, methods, techniques, sequences and procedures, coordination of all portions of the contract and Change Order work.
The Contractor shall on a weekly basis submit an approximate accounting of the amount expended on the Time and Materials work to date and an estimate of the Impact to the time of performance of work.
I. Partial Payments for Time and Materials Work.
Progress payments for Time and Materials work shall only be made if the anticipated cost of the changed work is in excess of $50 ,000 and/or the time to
perform the changed work will exceed two (2) months duration. To receive payments for Time and Materials work, the Contractor shall submit to the Engineer an invoice of the daily reports which were verified by the Inspector, with details and documents, verifying the Contractor’s and Subcontractor's actual costs incurred for the Time and Materials work as set forth in Subsections B through H. Costs shall be submitted within thirty (30) calendar days after the T&M work has been satisfactorily completed unless an extension of time for submittal is authorized in writing by the Inspector.
END OF SECTION
Redlands Regular Meeting of 02-06-24
616 of 857
SCHEDULE OF VALUES 01298-1
SECTION 01298 SCHEDULE OF VALUES
1.1 GENERAL
A. The Schedule of Values shall be used as a basis for determining progress payments on a lump sum contract or any designated lump sum bid item. The Schedule of Values shall be a schedule of cost loaded construction activities equal, in total, to the lump sum bid and shall be in such form and sufficient detail to correctly represent a reasonable apportionment of the lump sum. Prior to submitting an invoice for payment, the CONTRACTOR shall have submitted a detailed Schedule of Values and obtained approval from the ENGINEER.
B. Each lump sum bid item on the Schedule of Work and Prices, as set forth in the Bid must be broken down separately. The breakdown of each lump sum bid item must cover the cost of construction required by the contract documents for that item. The sum of the values for the construction activities, within a bid item, must equal the total bid amount for that item. The breakdown shall include subcontract amounts which shall not deviate from the amounts submitted in the Bid Proposal. The CONTRACTOR shall provide certification from the Subcontractors certifying the subcontract amounts.
C. Each activity in the Schedule of Values shall delineate one construction activity.
For example, the placement of concrete between construction joints, the construction of an electrical duct bank or pipeline between points A & B. The costing for each activity should include all costs for the labor and materials or equipment required to complete the activity. For example, concrete construction activities should include all costs for the forming, placing of reinforcement, placing concrete and curing. The cost for pipeline construction activities should include materials, equipment and installation including pipeline supports or thrust blocks. The excavation and backfill for a pipeline or structure may be separate activities. The Contract Price breakdown shall include the itemized costs for the plant establishment and any maintenance services to be performed before the final project acceptance is made. No non-construction activity shall be cost loaded.
D. The CONTRACTOR shall use cost loaded construction activities from the Construction Schedule as a Schedule of Values. Each construction activity shall be encoded to its bid item and a sort provided for each bid item totaling the cost loaded amount. The total of the Cost Loaded amounts for each bid item shall equal the amount bid for that item. The total of the Schedule of Values shall equal the current Contract value at all times. At any time during the progress of the Work of the Contract the INSPECTOR reserves the right to review the cost loading of the Schedules of Values and direct necessary revisions. When requested by the INSPECTOR, the CONTRACTOR shall provide all information necessary to substantiate the cost loading.
Redlands Regular Meeting of 02-06-24
617 of 857
SCHEDULE OF VALUES 01298-2
E. Attached are samples of the Schedule of Values. The City will provide project specific Schedule of Values for the CONTRACTOR to use throughout the project at the Preconstruction Meeting. The Schedule of Values must be used by the CONTRATRACTOR at the time of each progress payment.
END OF SECTION
Redlands Regular Meeting of 02-06-24
618 of 857
SCHEDULE OF VALUES 01298-3
Redlands Regular Meeting of 02-06-24
619 of 857
SCHEDULE OF VALUES 01298-4
Redlands Regular Meeting of 02-06-24
620 of 857
SCHEDULE OF VALUES 01298-5
Redlands Regular Meeting of 02-06-24
621 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
622 of 857
CONSTRUCTION SCHEDULE 01321-1
SECTION 01321 CONSTRUCTION SCHEDULE
1. THE REQUIREMENT
A. It is expressly understood and agreed that the time of beginning, the rate of progress, and the time of completion of the Work are of the essence of this Contract.
B. The CONTRACTOR’S representative in charge of scheduling is required to attend all meetings pertaining to scheduling and progress of the Work.
C. The CONTRACTOR shall submit to the ENGINEER 3
hard copies and the
electronic file of the CONTRACTOR'S Construction Schedule (the schedule) at the time of the preconstruction meeting. The schedule shall be either a Critical Path Method (CPM) Network or a detailed Bar Chart with the critical path clearly shown. If the CPM network option is used, then Primavera Project Management or Microsoft Project shall
be the scheduling software. If a detail Bar Chart is used, Microsoft Excel shall be the software utilized. The schedule shall include the following:
1. Activity ID,
2. Activity Description,
3. Start date for each activity,
4. Finish date for each activity,
5. Original duration,
6. Predecessor,
7. Successor,
8. Percent Complete,
9. Remaining Days.
A minimum of seven (7
) calendar days for review of each schedule. Schedule
activities shall be of sufficient detail to assure adequate planning has been done for proper execution of the Work and such that, in the sole judgement of the ENGINEER, it provides an appropriate basis for monitoring progress. The schedule shall begin with the date of issuance of the Notice to Proceed and conclude with the date of Final Completion shown in the Contract. Submittal and approval of the schedule in accordance with the requirements of this Section is a condition precedent to the issuance of any payments under this Contract. Once the schedule is approved it will become the baseline schedule and must be shown and compared on all subsequent schedule submittals.
D. Float, slack time, or contingency within the schedule (i.e., the difference in time between the project's early completion date and the required Contract Completion date), and total float within the schedule, is not for the exclusive use of either the CITY or the CONTRACTOR, but is a jointly owned expiring resource available to and shared by both parties. Pursuant to this float sharing requirement, use of Redlands Regular Meeting of 02-06-24
623 of 857
CONSTRUCTION SCHEDULE 01321-2
float suppression techniques shall be cause for rejection of the schedule and any revisions or updates.
E. Time extensions shall not be granted nor delay damages paid until a delay occurs which is beyond the control and without the fault or negligence of the CONTRACTOR and its Subcontractors or Suppliers, at any tier, and which extends actual performance of the Work beyond the current Contract completion d
ate and the completion date projected by the current, approved, updated schedule. If the delay occurs along a path, which the current approved Construction Schedule update projects late completion prior to addition of any CITY caused delay, then the time extension allowed will be only for the additional delay demonstrated by the approved Time Impact Analysis. Time extensions shall be granted only if they are clearly demonstrated by the CONTRACTOR through the submittal, within seven (7) calendar days after the delay occurs, of a Time Impact Analysis which demonstrates the estimated impact on the end date of the Work; is based upon the updated Construction Schedule current as of the month the delay occurred; and demonstrates that the delay cannot be mitigated, offset, or eliminated through such actions as revising the intended sequence of Work or other means.
If a time extension if granted by the CITY, the updated schedule reflecting the change shall become the baseline and be reflected schedule and must be shown and compared on all subsequent schedule submittals.
Since float time within the Construction Schedule is jointly owned, it is acknowledged that CITY caused delays on the project may be offset by CITY caused time savings (e.g. critical path submittals returned in less time than allowed by the Contract or approval of substitution requests which result in a savings of time to the CONTRACTOR). In such an event, the CONTRACTOR shall not be entitled to receive a time extension or delay damages until all CITY caused time
savings are exceeded and the Contract completion date is also exceeded.
F. If the initial schedule submitted shows completion of Work more than thirty (30) calendar days in advance of the Contract completion date, the ENGINEER may, at no cost to the CITY, decrease the Contract duration by issuance of a Change Order which changes appropriate Milestone Date(s) and the Contract completion date to the completion date reflected on the schedule. Any approved schedule, revision, or update having an early completion date shall show the time between the
early completion date and the Contract completion date as "project float".
G. Comments made by the ENGINEER on the schedule during review will not relieve the CONTRACTOR from compliance with all requirements of the Contract. The ENGINEER may request that the CONTRACTOR and all major Subcontractors (defined herein as being any Subcontractor, Sub-Subcontractor, or Supplier with five (5) percent or more of the value of the Contract) participate in Redlands Regular Meeting of 02-06-24
624 of 857
CONSTRUCTION SCHEDULE 01321-3
review of any schedule submission. All revisions shall be submitted within seven (7) calendar days after the ENGINEER’S review.
H. Two copies of an updated schedule shall be submitted to the ENGINEER for approval with the submittal of each CONTRACTOR'S monthly payment request or the monthly payment request will be withheld. For those activities started but not yet completed at the time of submittal, the updated schedule shall reflect the percentage complete, as agreed between the CONTRACTOR and the INSPECTOR, and an estimate of the remaining duration. The monthly update of the schedule shall include an updated bar chart with logic arrows or network diagram and include the same additional data as required by Section 1.C. If the CPM network option is used, the schedule shall be calculated using remaining durations and the progress override option. The monthly update shall also include a complete, hard copy list of all the changes made from the previously approved submittal. If the schedule is done using Primavera, use a Claim Digger report for the list of changes.
I. The submittal of an updated schedule which meets the requirements of this Section, accurately reflects the status of the Work (for all previously accepted activities), and incorporates all approved changes into the schedule, shall be a condition precedent to the processing of the monthly payment application. (Actual and/or forecast dates for status of additional submittal cycles shall be added without the prior approval of the Engineer.) Updated schedules shall also be submitted at such other times as the ENGINEER may direct. Upon approval of a Change Order or issuance of a notice to proceed with a change, the approved change shall be reflected in the next schedule update.
J. If completion of any part of the Work, delivery of equipment or materials, or submittal of CONTRACTOR submittals is behind schedule and will impact the end date of the Work, the CONTRACTOR shall submit a written recovery plan acceptable to the ENGINEER for completing the Work by the current Contract completion date, if requested by the ENGINEER.
K. As a condition precedent to the release of any retained funds, the CONTRACTOR shall, after substantial completion of the Work has been achieved, submit a certified, final schedule which accurately reflects the manner in which the project was constructed and includes actual start and completion dates for all activities on the schedule.
END OF SECTION
Redlands Regular Meeting of 02-06-24
625 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
626 of 857
CONSTRUCTION PROGRESS PHOTOGRAPHY 01322-1
SECTION 01322 CONSTRUCTION PROGRESS PHOTOGRAPHY
1.1 GENERAL
A. Required: Provide photographs taken at the Jobsite at the specified stages of Contracted Work in accordance with provisions of this Section.
1. The Contractor shall provide the City with photos with addresses identifying each property location, the direction the photograph was taken (facing North, South etc).
2. Take first photographs just before CONTRACTOR starts any work operations at the Jobsite.
3. Take final photographs when all Contracted Work has been completed, regardless of time interval since previous photographs were taken.
1.2 SUBMITTALS
Except as otherwise directed by the ENGINEER, submit all photographs electronically on a CD/DVD organized by phase of construction and location.
1.3 QUALITY A SSURANCE
Photographs and prints to be of professional quality; clear, in focus, with high resolution and sharpness, and with minimum distortion.
END OF SECTION
Redlands Regular Meeting of 02-06-24
627 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
628 of 857
CONSTRUCTION STATUS REPORTS 01323-1
SECTION 01323 CONSTRUCTION STATUS REPORTS
1.1 REQUIREMENTS
A. Daily Status Report
The Contractor shall complete a daily report indicating manpower, major equipment, subcontractors, unusual occurrences and etc., involved in the performance of the work. The daily report shall be completed on forms prepared by the Contractor and approved by the City and shall be submitted to the Project Manager at the conclusion of each work week.
The Contractor shall also have workers on the project sign in and out each day on the City of Redlands Daily Sign In Sheet which shall state the name, times in and out and the work performed by each worker on the project each day. The completed Daily Sign In Sheets shall be submitted to the City of Redlands Project Manager at the end of each work week. Failure to submit daily reports and daily sign in sheets to the Project Manager on a weekly basis will result in a possible and temporary suspension of work until reports are submitted.
B. Weekly Status Report
During the construction phase of the Work, the CONTRACTOR shall submit weekly written status reports to the ENGINEER and the INSPECTOR. The report shall contain a record of inspections and tests, not performed by CITY forces, for all Work accomplished subsequent to the previous report and shall include the following information:
1. Type of work under way during the time frame of the report (e.g., earthwork, concrete work, structural steel erection, equipment manufacturing, component installation).
2. Inspections and tests, and location of inspections and tests that were made.
3. Results of inspections.
4. Reports of tests performed, including those specified, with the results of the tests, and acceptance criteria, including failures and remedial action to be taken. Test results, including all computations, shall be attached to the report form. Where test results cannot be completed by the time the report is submitted, a notation shall be made that the test was performed, including the approximate expected date that test results will be reported.
5. Report of any nonconforming items/activities. Nonconformance report forms designed solely for this purpose shall be utilized.
Redlands Regular Meeting of 02-06-24
629 of 857
CONSTRUCTION STATUS REPORTS 01323-2
6. Results of inspections of material and equipment done upon their arrival at the Jobsite and prior to their incorporation into the Work. This includes, but is not limited to, compliance with approved submittals, damage, and proper storage requirements.
7. Offsite quality control activities.
8. Instructions received from the ENGINEER or INSPECTOR.
9. In all cases, the report must be verified and signed by the CONTRACTOR'S representative. The verification is to contain the statement that all supplies and materials incorporated in the Work are in compliance with the terms of the Contract except where noted.
C. 3 Week Look Ahead Schedule
During the construction phase of the Work, the CONTRACTOR shall submit 3 Week Look Ahead reports to the ENGINEER at the weekly progress meetings or as directed by the ENGINEER. The report shall include the following information:
1. Type of work under way during the time frame of the report (e.g., earthwork, concrete work, structural steel erection, equipment manufacturing, component installation).
D. Miscellaneous Submittals
CONTRACTOR shall prepare a Daily Construction Report recording the following information concerning events at the job-site and submit original copies to the ENGINEER at weekly intervals
for approval:
1. List of Subcontractors and Sub-Subcontractors at the site , types of works and job location.
2. Count of CONTRACTOR’S personnel at the site , name, type of work, hours completed and job location.
3. Construction equipments at the site.
4. High and low temperatures, general weather conditions.
END OF SECTION
Redlands Regular Meeting of 02-06-24
630 of 857
SUBMITTALS 01330-1
SECTION 01330 SUBMITTALS
1.1 THE REQUIREMENT
A. The CONTRACTOR shall furnish a schedule and list of all required submittals to the ENGINEER, including required submittals by all Subcontractors.
B. Wherever called for in these Specifications or on the plans, or where required by the ENGINEER, the CONTRACTOR shall furnish to the ENGINEER for review, two
(2 ) hard copies and one electronic (PDF) copy of each submittal.
The term "submittal" as used herein shall be understood to include detail design calculations, design drawings, shop drawings, fabrication and installation drawings, erection drawings, lists, graphs, operating instructions, catalog sheets, data sheets, samples, and similar items. Unless otherwise required, said submittals shall be submitted to the ENGINEER at a time sufficiently early to allow review of same by the ENGINEER and to accommodate the rate of Construction Progress required under the Contract without delaying the Contract Work and with due regard for the possibility of resubmittals. All submittals shall be in English.
C. All design or shop drawings or other submittals shall be accompanied by a transmittal form for each submittal. Any submittal not accompanied by such a form
may be returned, at the ENGINEER'S discretion, for resubmittal.
D. Normally, a separate transmittal form shall be used for each specific item or class of material or equipment for which a submittal is required. Transmittal of a submittal of various items using a single transmittal form will be permitted only when the items taken together constitute a manufacturer's "package" or are so functionally related that expediency indicates a review of the group or package as a whole. A multiple-page submittal shall be collated into sets, and each set shall be stapled or bound, as appropriate, prior to transmittal to the ENGINEER.
E. Shop Drawings shall show in detail the size, sections, and dimensions of all the member(s); the arrangement and construction of all connections and joints; all holes, straps, and other fittings required for attaching work and other pertinent details. When required, engineering computations shall be submitted. The CONTRACTOR shall be responsible for delivering reviewed copies of shop Drawings to all others whose work is dependent thereon. The CONTRACTOR shall maintain at the site of the Project, at all times, a complete file of approved Shop Drawings and manufacturers' data for this Project.
F. Except as may otherwise be provided herein, the ENGINEER will return prints of each submittal to the CONTRACTOR, with its comments noted thereon, within twenty (20)
calendar days following their receipt by the ENGINEER. It is considered reasonable that the CONTRACTOR shall make a complete and acceptable submittal to the ENGINEER by the second submission of a submittal Redlands Regular Meeting of 02-06-24
631 of 857
SUBMITTALS 01330-2
item. The CITY reserves the right to withhold moneys due the CONTRACTOR to cover additional costs of the ENGINEER'S review beyond the second submittal. Submittal will be returned to the CONTRACTOR with one of four (4) markings:
1. If a submittal is returned to the Contractor marked "NO EXCEPTIONS," formal revision and resubmission of said submittal will not be required.
2. If a submittal is returned to the Contractor marked "EXCEPTIONS NOTED," formal revision and resubmission of said submittal will not be required, unless specifically requested.
3. If a submittal is returned to the Contractor marked "RETURNED FOR CORRECTION," the Contractor shall revise said submittal and shall resubmit the originally required number of copies of said revised submittal to the Engineer.
4. If a submittal is returned to the Contractor marked "NOT ACCEPTABLE," the Contractor shall revise said submittal and shall resubmit the originally required number of copies of said revised submittal to the Engineer.
G. All Work for which Shop Drawings are required shall be performed in accordance with the reviewed and approved copies. Fabrication of an item shall not commence before the ENGINEER has reviewed the pertinent submittal and returned the copies to the CONTRACTOR marked either "NO EXCEPTIONS TAKEN," or "MAKE CORRECTIONS
NOTED“. Revisions indicated on
submittals shall be considered as changes necessary to meet the requirements of the Contract Documents and shall not be taken as the basis for claims for extra work.
H. All CONTRACTOR submittals shall be carefully reviewed by an authorized representative of the CONTRACTOR prior to submission to the ENGINEER.
Each submittal shall be dated, signed, and certified by the CONTRACTOR as being correct and in strict conformance with the Contract Documents. No consideration for review by the ENGINEER of any CONTRACTOR’S submittal will be made for any items which have not been so certified by the CONTRACTOR. All noncertified submittals will be returned to the CONTRACTOR without action taken by the ENGINEER, and any delays caused thereby shall be the total responsibility of the CONTRACTOR.
I. Should the Shop Drawings or manufacturers data (for submittals required by the Standard Specifications or the specifications) show variations from the Contract requirements, the CONTRACTOR shall make specific mention of such variations in the letter of transmittal, in order that, if acceptable, suitable action may be taken for proper adjustment of the Contract; otherwise the Redlands Regular Meeting of 02-06-24
632 of 857
SUBMITTALS 01330-3
CONTRACTOR will not be relieved of the responsibility for executing the work in accordance with the Contract Documents, and the approved submittals.
J. The ENGINEER’S review of CONTRACTOR’S submittal shall not relieve the CONTRACTOR of the entire responsibility for the correctness of details and dimensions and conformance to the Specifications. The CONTRACTOR shall assume all responsibility and risk for any misfits due to any errors in the submittal. Any fabrication or other work performed in advance of the receipt of accepted submittals shall be entirely at the CONTRACTOR’S risk and expense.
The CONTRACTOR shall be responsible for the dimensions and the design of adequate connections and details.
K. CONTRACTOR’S Coordination:
1. ENGINEER will return and will not review unrelated submittals.
2. The CONTRACTOR may be required to provide drawings, setting diagrams and similar information necessary for proper coordination of Contracted Work. Such data shall remain between the CONTRACTOR and CONTRACTOR’S Subcontractor and will not be reviewed by the ENGINEER unless specifically called for in the Contract Documents.
3. ENGINEER will not review any required Structural Shop Drawings, Structural Calculations, etc., not prepared or signed by a State of California licensed ENGINEER.
4. ENGINEER will return and will not review any submittal requiring coordination with other submittals until such other submittals or required information is received by the Consultant or ENGINEER.
L. CONTRACTOR’S Submittals: CONTRACTOR’S submittals required for performance of Contracted Work, shall include, but are not limited to, the following:
1. Schedule of Values for all Lump Sum items within the Proposal.
2. Construction Schedule and Notification to ENGINEER of completion of each milestone or percentage increment of the Work as required.
3. Submittal Schedule
4. Daily Construction Reports
5. Shop Drawings and Structural Calculations.
6. Manufacturer’s Data and Specifications.
Redlands Regular Meeting of 02-06-24
633 of 857
SUBMITTALS 01330-4
7. Samples
8. Templates
9. Certificate of Compliance
10. Construction Photographs
11. Substitutions
12. Record Drawings and Record Project Manual
13. Operation & Maintenance Manuals
14. Stock Materials, Spare parts, tools
15. Material Testing Results
16. Maintenance Logs and Maintenance Schedule.
M. CONTRACTOR shall conform to the provisions of the Contract Document and as may be specifically directed by the ENGINEER.
1. Preparation and processing of submittals shall be coordinated with Contracted Work operations, which include fabrication, purchasing and delivery of work items so as not to delay Contracted Work operations.
2. In each copy of the Submittal, mark every applicable material, product, equipment, manufacturer’s data, product information, color samples, rating or values, part and model numbers, etc. by red color circle. Each of the submittal items must be clearly distinguishable from other unrelated or similar items listed in the Manufacturer’s Catalog or Technical Specifications, Manuals, etc.
N. Coordination and Submittals:
1. Carefully review and coordinate all aspects of each item being submitted.
2. Carefully review contract drawings and technical sections, verify all work as laid out or indicated meeting the applicable codes and standards.
3. Ensure ample time for reviewing and processing of the submittals by the CITY or other authorized agencies, delays resulting from improper and untimely submittals shall be the responsibility of the CONTRACTOR.
Redlands Regular Meeting of 02-06-24
634 of 857
SUBMITTALS 01330-5
4. Verify that all such submittal items conform to the Project Manual requirements noted in the Technical Sections.
5. Verify all site conditions and provide all required dimensions and measurements in Shop Drawings.
6. Where necessary, review the CITY’S comments, make changes and resubmit to local governing agencies for approval. Furnish the ENGINEER copies of the approved plans or drawings for review.
O. CONTRACTOR shall affix to each submittal, the CONTRACTOR’S signature certifying that required coordination has been performed and include on an attached label for processing and recording action taken, noting the following:
1. Name of the Project
2. Date of the Submittal
3. Name and address of Consultant
4. Name and address of the CONTRACTOR
5. Name and address of the Subcontractor(s)
6. Name and address of the Supplier
7. Name and address of the Manufacturer
8. Reference to Specification Section Number and Title
9. Reference to Drawing Sheet Number and detail(s)
10. Submittal Number
11. Priority Number and expected return date.
END OF SECTION
Redlands Regular Meeting of 02-06-24
635 of 857
SUBMITTALS 01330-6
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
636 of 857
SUBMITTALS 01330-7
Redlands Regular Meeting of 02-06-24
637 of 857
SUBMITTALS 01330-8
Redlands Regular Meeting of 02-06-24
638 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-1
SECTION 01571 STORMWATER POLLUTION PREVENTION PLAN
PART 1 - GENERAL
This project is subject to the requirements of the General Permit for Storm Water Discharges associated with Construction and Land Disturbance Activities, under the California State Water Resources Control Board. Order No. 2009-0009-DWQ, CAS000002, and all amendments. All permit related documents can be located at the State Water Resources Control Board (SWRCB) website at www.waterboards.ca.gov. This project lies within the boundaries of the Santa Ana Regional Water Quality Control Board (RWQCB). The project is also covered by the municipal MS4 permit, Santa Ana-Order No. R8-2010
-0036. Guidance manuals applicable to this project
are the California Best Management Practices Handbooks found at www.cabmphandbooks.com.
The Contractor shall be responsible for complying with the SWPPP and all laws, codes, ordinances, and requirements of the governing agencies regarding the discharge of pollutants, pollution control devices, and any other related stormwater and non-stormwater requirements for this project, including but not limited to reporting, sampling, and amendments.
The Contractor shall have the necessary training and certifications to implement the SWPPP, conduct inspections and maintain the required water pollution control practices. See Section “QUALIFIED SWPPP PRACTITIONER (QSP)”.
The Contractor shall follow all requirements of the prepared job specific Storm Water Pollution Prevention Plan (SWPPP) including the Construction Site Monitoring Program Requirements (CSMP). The contractor shall provide a Qualified SWPPP Practitioner (QSP) to implement all requirements of the SWPPP. The QSP shall be responsible for monitoring and sampling as required by the CSMP.
Approval of the SWPPP must be completed prior to the start of construction activity. However, the contract time will commence.
PART 2 - STORMWATER POLLUTION PREVENTION PLAN PREPARATION If required under Order No. 2009-0009 -DWQ, CAS000002, or its amendments, the Contractor shall prepare a SWPPP for the project. The SWPPP provides the general stormwater approach for the project and the minimum necessary BMPs. The contractor shall provide a Qualified SWPPP Practitioner (QSP) for this project and submit to the City copies of the required certifications or registrations for the QSP prior to SWPPP approval.
The California Storm water Quality Association (CASQA) has prepared a SWPPP template for use with Order No. 2009-0009-DWQ, CAS000002.
The SWPPP template provides the general
storm water approach for the project and the minimum necessary BMPs. The SWPPP template is not to be a considered a final and complete document until it has been completed and approved by a Qualified SWPPP Developer (QSD).
The QSD is expected to include in the updated Final
Redlands Regular Meeting of 02-06-24
639 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-2
SWPPP necessary details pertaining to the methods and scheduling of construction and any additional necessary BMPs, based on the project approach.
The QSD shall use
the CASQA SWPPP template for preparation of the SWPPP. The Caltrans SWPPP template shall not be used.
Within 5 days of the Notice to Proceed, Contractor shall submit two (2) hardcopies of the draft Storm Water Pollution Prevention Plan (SWPPP) for review. SWPPP review shall be in accordance with the requirements set forth in Section 01330 of the General Requirements. Once all of the noted revisions have been made and the SWPPP is complete for submittal to the State, two (2) final signed hardcopies and one (1) electronic copy of the SWPPP must be submitted to the Engineer for acceptance.
The Contractor shall keep one copy of the approved SWPPP and approved amendments at the project site. The SWPPP shall be made available upon request by a representative of the City of Redlands, the Regional Water Quality Control Board or the State Water Resources Control Board. Requests made by the public or other third-parties for review of the SWPPP shall be directed to the Project Engineer. The Contractor shall notify the Engineer immediately when regulatory agencies request to enter, inspect, sample, monitor, or otherwise access the project site or the Contractor’s records pertaining to the water pollution control work.
Contractor shall immediately send all correspondences, notices of violation, enforcement actions or proposed fines, issued by a regulatory agency, to the Engineer.
The SWPPP shall be updated or amended as necessary or as required for compliance purposes.
All updates to the SWPPP shall be per the guidelines contained therein. A copy of the SWPPP must be kept at the project site at all times. In the case of a linear construction project (water, sewer, street), where no field office has been established, the copy of the SWPPP shall be kept by the contractor’s foreman in the vicinity of the actual construction and made available within thirty (30) minutes of request. The SWPPP shall be made available upon request by a City Inspector, a representative of the Regional Water Quality Control Board or the State Water Resources Control Board. Requests made by the public or other third parties for review of the SWPPP shall be directed to the City Engineer.
PART 3 - SWPPP IMPLEMENTATION
Unless otherwise specified, the Contractor shall be responsible throughout the duration of the project for installing, constructing, inspecting, maintaining, removing, and disposing of the water pollution control devices; and practices specified in the SWPPP, its amendments, or by the City Inspector. Unless otherwise directed by the City Engineer, the Contractor's responsibility for SWPPP implementation shall continue throughout temporary suspensions of work, regardless of reason, unless specified otherwise in writing by the City Engineer. Requirements for installation, construction, inspection, maintenance, removal, and disposal of water pollution control devices and practices shall conform to the requirements in the SWPPP and these special provisions.
The National Weather Service (http://www.srh.noaa.gov/) weather forecast shall be monitored and used by the Contractor on a daily basis. If there is a forecast of 50% or greater probability of precipitation in the project area, the necessary water pollution control devices, plans and practices shall be deployed prior to the onset of the precipitation and immediate notice provided Redlands Regular Meeting of 02-06-24
640 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-3
to the City Engineer. The contractor’s QSP shall be required to prepare and submit a Rain Event Action Plan (REAP), if required, any time the probably of rainfall is 50% or greater.
For the purposes of erosion and sediment control, disturbed soil areas shall be considered active whenever the soil disturbing activities have occurred, continue to occur or will occur during the ensuing 14 days. Non-active areas shall be protected as prescribed in the General Construction Permit within 14 days of cessation of soil disturbing activities or prior to the onset of precipitation, whichever occurs first.
If the City Inspector finds the contractor is not in compliance with the SWPPP or any other applicable pollution control laws or regulations, the City Inspector shall direct the contractor to correct the violation. The Contractor shall immediately take measures to correct the violation or notify the City Engineer in writing why correcting the violation immediately is not possible and provide a timetable by which the violation will be corrected. The City Engineer may accept the timetable, reject it or modify it. Under no circumstances will the contractor submit a timetable that exceeds the duration of construction in the immediate area. If the Contractor fails to correct the identified violation by the date agreed upon or prior to the onset of precipitation, the project shall be in nonconformance with these specifications and subject to the remedies as described in Section “LEGAL RELATIONS AND RESPONSIBILITY”.
Installing, inspecting and maintaining water pollution control practices on areas outside the City of Redlands right of way, not specifically arranged and provided for by the City of Redlands in the execution of this contract, will not be paid for without prior written approval.
No work required by regulatory agencies, and for which the Contractor would request additional compensation from the City, shall be started without prior approval from the City Engineer.
PART 4 - MAINTENANCE
To ensure the proper implementation and correct functioning of water pollution control devices and practices, the Contractor shall assign a Qualified SWPPP Practitioner (QSP) to regularly inspect and maintain the co nstruction site’s water pollution control devices and practices as identified in the SWPPP. The frequency of the inspections shall be in accordance with the SWPPP. In the event of multiple consecutive violations, the City Engineer may increase the frequency of the inspections. These additional inspections shall be at the Contractor’s expense based on the current adopted resolution establishing such fees.
The QSP/Contractor shall document the inspections findings, using photographs and a written narrative, and if necessary, make the necessary corrections to the water pollution control practices or devices. One copy of each site inspection record shall be submitted to the City Engineer within 5 working days of completing the inspection. The QSP/Contractor shall submit one copy of each Rain Event Action Plans (REAP), when required, within 12 hours of anticipated precipitation event. The QSP/Contractor shall also submit one copy of each monitoring/sampling report, when required, within 24 hours of receiving the results. The contractor shall be responsible for all expenses incurred in the reporting process.
Redlands Regular Meeting of 02-06-24
641 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-4
PART 5 - REPORTING REQUIREMENTS - DISCHARGE
If the Contractor identifies discharges leaving the construction site or flowing into drainage systems or surface waters in a manner causing, or potentially causing, a condition of pollution, or if the project receives a written notice or order from a regulatory agency, the Contractor shall immediately inform the City Engineer. The Contractor shall submit a written report to the City Engineer in less than 24 hours of the discharge event, notice, or order. The report shall include the following information:
A. The date, time, location, nature of the operation, and type of discharge, including the cause or type of the notice or order
Contractor received.
B. The water pollution control practices deployed before the discharge event, or prior to receiving the notice or order.
C. The date of deployment and type of water pollution control practices deployed after the discharge event, or after receiving the notice or order, including additional measures installed or planned to reduce or prevent reoccurrence.
D. An implementation and maintenance schedule for affected water pollution control practices.
The contractor shall also submit any reports required by the SWPPP or the General Permit for Storm Water Discharges associated with Construction and Land Disturbance Activities to the appropriate agencies. The contractor shall be responsible for all expenses incurred in the reporting process. Any required sampling shall be done by the contractor or his QSP in compliance with the SWPPP.
PART 6 - REPORTING REQUIREMENTS – ANNUAL REPORT and NOTICE OF
TERMINATION
The contractor shall be responsible for preparing the Annual Report. The Annual report shall be prepared per Section XVI. ANNUAL REPORTING REQUIREMENTS of the General Permit for Storm Water Discharges associated with Construction and Land Disturbance Activities, under the California State Water Resources Control Board. Order No. 2009 -0009-DWQ,
CAS000002. The Annual Report must be prepared by or under the direction of a QSP.
1) The contractor or QSP shall prepare an Annual Report no later than August 15th of each year.
2) The contractor or QSP shall certify each Annual Report in accordance with the Special Provisions.
3) The contractor or QSP shall retain an electronic or paper copy of each Annual Report for a minimum of three years after the date the annual report is filed.
Redlands Regular Meeting of 02-06-24
642 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-5
4) The contractor or QSP shall include storm water monitoring information in the Annual Report consisting of:
a) A summary and evaluation of all sampling and analysis results, including copies of laboratory reports;
b) The analytical method(s), method reporting unit(s), and method detection limit(s) of each analytical parameter (analytical results that are less than the method detection limit shall be reported as "less than the method detection limit");
c) A summary of all corrective actions taken during the compliance year;
d) Identification of any compliance activities or corrective actions that were not implemented;
e) A summary of all violations of the General Permit;
f) The names of individual(s) who performed the facility inspections, sampling, visual observation (inspections), and/or measurements;
g) The date, place, time of facility inspections, sampling, visual observation (inspections), and/or measurements, including precipitation (rain gauge); and
h) The visual observation and sample collection exception records and reports specified in Attachments C, D, and E.
5) The contractor or
QSP shall provide training information in the Annual Report consisting of:
a) Documentation of all training for individuals responsible for all activities associated with compliance with this General Permit; 2009-0009
-DWQ 40 September 02, 2009 Order
2009-0009-DWQ 41 September 02, 2009
b) Documentation of all training for individuals responsible for BMP installation, inspection, maintenance, and repair; and
c) Documentation of all training for individuals responsible for overseeing, revising, and amending the SWPPP.
A copy of the Annual Report shall be submitted to the City no later than 9 A.M. each August 15th. In the event August 15th is a Friday, Saturday, or Sunday, the report shall be submitted no later than 5 P.M. on the Thursday prior to August 15th. If the project is completed prior to August 1st, regardless of when the project started, the Annual Report is due within two weeks of project completion. The contractor shall submit two hard copies of the annual report and one digital copy in PDF format on compact disc (CD).
Redlands Regular Meeting of 02-06-24
643 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-6
Failure to submit the Annual report within the timeframes specified will result in progress payments and/or retention release being delayed and/or withheld. The City of Redlands, at its discretion, may complete the annual report based on records provided by the contractor. The contractor shall reimburse the city the full cost of creating the Annual Report along with an administrative fee not to exceed 1.7 times the total cost. The contractor shall also be liable for any fines or judgments levied by the Regional Water Quality Control Board against the City of Redlands as a result of the contractors failure to provide the annual report within the time frames listed above.
Under no circumstances does the submittal of a copy of the Annual Report to the City of Redlands relieve the contractor of his responsibility to maintain the Annual Report records for a minimum of three years after the date of submittal.
The contractor shall be responsible for preparing the Notice of Termination. The Notice of Termination shall be prepared within 30 days of the cessation of construction and shall meet all the requirements of the General Permit for Storm Water Discharges associated with Construction and Land Disturbance Activities, under the California State Water Resources Control Board.
Order No. 2009-0009-DWQ, CAS000002. The Notice of Termination must be prepared by or under the direction of a QSP.
Along with submitting the Notice of Termination to the City of Redlands, the QSP shall submit one (1) hard copy and one (1) electronic copy of the Storm Water Pollution Prevention Plan (SWPPP), including all inspection reports, photographs and other documents as required by the General Permit for Storm Water Discharges associated with Construction and Land Disturbance Activities, under the California State Water Resources Control Board. Order No. 2009-0009- DWQ, CAS000002, to the Engineer.
PART 7 - WATER POLLUTION BEST MANAGEMENT PLAN (BMP) BUDGET
The Contractor shall submit a completed Water Pollution BMP budget, which itemizes the BMPs for water pollution control work. The Contractor shall identify items, quantities, and values for all water pollution control work. The Water Pollution BMP budget shall provide a cost breakdown for the water pollution control work based on BMP quantity, unit cost, and total amount.
The Contractor shall be responsible for the accuracy of the quantities and values used in the Water Pollution BMP budget. Partial payment for the item of water pollution control will not be made until the Water Pollution BMP budget is approved by the Engineer. Overhead and profit, except for time-related overhead, shall be included in the individual line items listed in the Water Pollution BMP budget. Line item quantities indicated in the Water pollution BMP budget in this section shall be considered project-specific minimums. All the BMPs listed in the Water Pollution Control BMP budget can be referenced in the CASQA Construction BMP Handbook.
PART 8 - PAYMENTS AND PENALTIES
Redlands Regular Meeting of 02-06-24
644 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-7
The Water Pollution BMP budget shall include full compensation for furnishing labor, materials, tools, equipment and incidentals for doing all the work involved in reviewing, updating, and implementing a Storm Water Pollution Prevention Plan, including installing, constructing, removing and disposing of water pollution control devices and practices, and non-stormwater management and waste management and no additional compensation will be allowed, unless there is a separate prior approval in writing by the City Engineer.
It shall be understood that the City of Redlands and/or the City Engineer’s acceptances does not relieve the Contractor of his/her full responsibility, legally and/or financially, to repair damages resulting from inadequacy and/or insufficiency of water pollution control devices and practices that were installed by the Contractor during construction activity.
PART 9 - LEGAL RELATIONS AND RESPONSIBILITY
The City Inspector may use any of the following measures if violations are not corrected in a timely manner or if the violation may present a danger to public health or to the environment; notices of correction or violation, stop work orders, citations, and using City staff or third party contractors to correct the problem. In the event that the above measures do not resolve the issues, the City Inspector shall inform the State Water Resources Control Board (SWRCB) of the violation and request their intervention.
The Contractor shall be solely responsible for penalties assessed or levied on the Contractor or the City of Redlands as a result of the Contractor’s failure to comply with the provisions in this section, including but not limited to, compliance with the applicable provisions of the Permits, the Manuals, and Federal, State and local regulations and requirements as set forth, therein.
Penalties shall also include payment made or cost incurred in settlement for alleged violations of the Permits, the Manuals, or applicable laws, regulations or requirements, Costs incurred could include sums spent instead of penalties, in mitigation or to remediate or correct violations. This shall apply regardless of the source issuing the penalties.
In the event a stop work order has been issued, the days passing between the discovery of the violation until the violation has been resolved and the stop work order has been lifted, shall be considered “working” days and shall not negate any claims by the City of Redlands for liquidated damages.
If the Contractor fails to correct violations immediately or within the time table established with the City Engineer, the City of Redlands may elect to use City staff or a third party to bring the project into compliance. The Contractor shall be responsible for the cost incurred by the City of Redlands when using City staff or a third party to bring the project into compliance. The City of Redlands reserves the right to add an additional fifteen (15) percent to the costs to cover administrative expenses.
PART 10 - RETENTION OF FUNDS
Redlands Regular Meeting of 02-06-24
645 of 857
STORMWATER POLLUTION PREVENTION PLAN 01571-8
Notwithstanding any other remedies authorized by law, the City of Redlands may retain money due the Contractor under the contract, in an amount determined by the City, up to and including the entire amount of penalties proposed, assessed or levied as result of the Contractor’s violation of the Permits, the Manuals, or Federal or State law, regulations or requirements. Funds may be retained by the City until final disposition has been made as to the Penalties. The Contractor shall remain liable for the full amount of penalties until such time as they are resolved with the entity seeking the penalties.
When a regulatory agency or third party identifies a failure to comply with the Permits and modifications, thereto, the Manuals, or other Federal, State or local requirements, the City of Redlands may retain money due to the Contractor, subject to the following:
A. The amounts retained, due to Contractor’s failure to conform to the provisions in this section, will be released for payment on the next monthly estimate for partial payment providing the corrections have been implemented and maintained and when water pollution has been adequately controlled, as determined by the City Engineer.
During the estimated period that the Contractor fails to conform to the provisions in this section, the City may retain an amount equal to 25 percent of the estimated value for the contract work performed.
PART 11 - QUALIFIED SWPPP PRACTITIONER (QSP)
The General Construction Permit requires a Qualified SWPPP Practitioner (QSP) to oversee implementation of the BMPs and to ensure proper project oversight. Any contractors bidding and/or awarded a contract for any projects for the City of Redlands subject to the provisions of the General Permit shall employ a QSP. Prior to being awarded a construction contract, the successful bidder shall submit the name of the QSP to the City or Redlands for approval.
The QSP shall be responsible for the elimination of all unauthorized discharges and the preparation and submittal of an annual compliance evaluation report.
END OF SECTION
Redlands Regular Meeting of 02-06-24
646 of 857
CONSTRUCTION INFORMATION SIGNS 0158 1-1
SECTION 01581 CONSTRUCTION INFORMATION SIGNS
1.1 THE REQUIREMENT
The City shall provide the Contractor with all required construction information signs for the project. The signs shall be installed at the locations noted in the plans, if included, or as otherwise directed by the Engineer. If the project consists of numerous sites, the construction information signs shall be relocated to each site as work progresses. The construction signs shall be installed the same day work commences on any construction site. If the sign is not installed prior to construction work beginning at a subsequent site, the City will install the information signs at the Contractor’s expense.
The installation of each sign shall be the responsibility of the contractor to include mounting posts, hardware and any related incidentals to ensure the sign is placed in a safe and secure manner. For any sign required for multiple site projects, where the sign is frequently relocated and not anticipated to be installed in the ground on posts, the Contractor shall provide a Type III barricade for mounting. The contractor shall obtain approval from the Engineer following installation of the construction information sign. If the signs are installed in the ground with posts, proper vertical clearance shall be provided. The minimum vertical clearance shall be six feet within a parkway area and seven feet within the sidewalk.
The construction information sign shall remain visible at all times. The contractor shall replace stolen signs at their expense and maintain the signs, ensuring all graffiti, soil, paint, etc. is removed from the sign immediately. Upon completion of the project, each sign shall be removed and returned to the City. If the sign is not returned to the City at the completion of the project in the original condition, the cost of the sign shall be withheld from the final progress payment.
The Contractor shall notify Underground Service Alert (Dig alert) at least 2 working days, but not more than 14 calendar days, prior to performing any excavation.
Full compensation for furnishing all labor, equipment, materials, and tools required to perform the tasks noted above, and as ordered by the Engineer, shall be considered as being included in the various Contract items of work and no separate or additional compensation will be allowed therefore.
END OF SECTION
Redlands Regular Meeting of 02-06-24
647 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
648 of 857
MOBILIZATION 01721-1
SECTION 01721 MOBILIZATION
1.1 THE REQUIREMENT
A. General
Whether Mobilization is included as a Contract Bid Item in the Bid Proposal Form or specified as part of the lump sum in the Contract Documents, the cost of labor, equipment, materials and incidentals for doing all the work in mobilization (in advance of construction operations and not directly attributable to any specific bid item) shall be included in the Contract Price Breakdown and progress payment estimate. If there is no mobilization bid item the CONTRACTOR shall submit to the INSPECTOR for approval the Contract Price Breakdown with the amount established for mobilization.
Mobilization shall include, but not be limited to, the following items, all as required for the proper performance and completion of the Work:
1. Obtaining all permits, licenses, insurance, and bonds. Providing copies to the ENGINEER.
2. Moving onto the Jobsite all of CONTRACTOR’S plant and equipment as required.
3. Erecting temporary buildings and other construction facilities.
4. Installing temporary construction power and wiring.
5. Establishing fire protection system for its temporary facilities.
6. Developing construction water supply.
7. Providing field office trailers for the CONTRACTOR, complete with all specified equipment, furnishings,
utility services and required approvals
from the CITY.
8. Providing sanitary facilities or connecting to onsite sanitary facilities as specified.
9. Providing for potable water facilities as specified. This includes a means by which all on site CONTRACTOR, Subcontractor or supplier personnel can wash their hands with soap.
10. Arranging for, and erection of, CONTRACTOR’S work and storage yards and sheds.
Redlands Regular Meeting of 02-06-24
649 of 857
MOBILIZATION 01721-2
11. Submitting all required Subcontractor insurance certificates and bonds.
12. Posting all CAL/OSHA required notices and establishment of safety programs.
13. Furnishing of Construction Schedule, Contract Price Breakdown and Submittal Schedules.
1 4. Erecting all temporary fencing, including removal and disposal of existing temporary fencing.
END OF SECTION
Redlands Regular Meeting of 02-06-24
650 of 857
SURVEYING 01722-1
SECTION 01722 SURVEYING
PART 1 - GENERAL
A. General
1. The CONTRACTOR shall be responsible for all surveys required to layout the Work and for the accuracy of all survey work for construction.
The CONTRACTOR shall include the cost of all such survey work in their Bid. The CONTRACTOR shall have all construction surveying performed by a `Licensed Land Surveyor' or a `Civil Engineer’ registered by the State of California to perform such work. The ENGINEER reserves the right to verify all survey work done by the CONTRACTOR.
2. The CONTRACTOR shall preserve the initial survey control points for the duration of their usefulness. Monumentation that is subject to disturbance or destruction shall be located and referenced prior to construction and relocated and referenced if necessary after construction, in accordance with the following requirements.
B. Construction Surveys
1. The CONTRACTOR shall provide all reference stakes and form checks necessary for construction and inspection of improvements. All construction staking shall be documented in cut sheets and provided to the ENGINEER. This staking may include but is not limited to: removals, joins, rough grade, slope, utilities, storm drains, sewers, curbs, walks, paving, wall and building stakes; and any other staking necessary for construction and inspection.
C. Reference Or Grade Stakes
1. A reference or grade stake shall be set for each grade change or angle point shown on the plan, standard plan, and shop drawing, in addition to the normal staking interval.
D. Form Checks
1. Forms shall be checked when durable points may be disturbed, removed, or are impractical to be used to verify the design location. The measured location shall be recorded in the survey field notes. All variations from the plan location shall be brought to the attention of the ENGINEER.
E. Staking Intervals And Offset Stake Lines
Redlands Regular Meeting of 02-06-24
651 of 857
SURVEYING 01722-2
1. All staking intervals shall be in accordance as directed by the Engineer .
Stake lines shall be set at an offset distance from the improvement to ensure proper grade, station, and alignment.
F. Utility Stakes
1. The CONTRACTOR shall provide stakes for all utilities, public or private, that require location or relocation, unless otherwise stated.
G. Additional Survey Work
1. The CONTRACTOR may be required to furnish additional survey work, such as profiles, restakes, Change Orders, etc., at the request of the ENGINEER or the INSPECTOR.
H. Accuracy
1. The CONTRACTOR shall use appropriate surveying methods to obtain the following standards: For fixed works (i.e. cast- in-place concrete; asphalt pavement, pipes and drains; and other items determined by the ENGINEER) the following survey standards shall be used. The absolute horizontal accuracy, in relationship to the Engineer’s control, shall be such that the semimajor axis of its 95% error ellipse is ±0.015 foot or less. The absolute vertical accuracy, in relationship to the Engineer’s control, shall be such that its standard deviation is ±0.015 foot or less. The relative horizontal accuracy of survey points within the Project shall be such that the semimajor axis of its 95% error ellipse is ±0.015 foot or less. The relative vertical accuracy of survey points within the Project shall be such that its standard deviation is ±0.015 foot or less.
2. For excavation purposes, the following survey standards shall be used.
The absolute horizontal accuracy, in relationship to the Engineer’s control, shall be such that the semimajor axis of its 95% error ellipse is ±0.1 foot or less. The absolute vertical accuracy, in relationship to the Engineer’s control, shall be such that its standard deviation is ±0.1 foot or less. The relative horizontal accuracy of survey points within the Project shall be such that semimajor axis of the 95% error ellipse is ±0.1 foot or less. The relative vertical accuracy of survey points within the Project shall be such that its standard deviation is ±0.1 foot or less.
I. Survey/Inspector
1. The CONTRACTOR shall provide to the INSPECTOR those
measurements and control points necessary to determine the location and conformance to the plan, line, and grade of the improvements necessary for inspection purposes.
Redlands Regular Meeting of 02-06-24
652 of 857
SURVEYING 01722-3
J. Survey Notes
1. The CONTRACTOR shall supply and keep notes on CITY standard format note sheets. The ENGINEER may request copies of, and otherwise review, survey notes at any time during the construction phase of the Project. Upon completion of the Project, the original survey notes shall become the property of the CITY and shall be delivered to the
ENGINEER
PART 2 – MONUMENT PRESERVATION GUIDELINES
A. New & Reconstruction Projects
1. Prior to Construction
a. The public survey records are to be researched for the location of all possible survey monuments within the scope of the project and copies shall be furnished to the survey crew.
b.
The survey crew shall diligently search for all survey monuments of record above or below the surface, within the road right-of-way. It is suggested that this search would include the use of a metal detector. When the detector indicates the possibility of a buried survey monument, then digging below the surface
to uncover the monument is required.
c. The survey crew shall properly reference all found survey monuments, which may be disturbed or covered during construction, to stable surface points. d.
The authorized surveyor shall properly complete a Corner Record or Record of Survey for the monuments noted in item c, above. Prior to the start of any construction work, the original or a print of the Corner Record or Record of Survey shall be submitted to the County Surveyor for review, signature and filing. A copy shall also be provided to the City prior to the start of construction to provide documentation that the requirement is met.
2. After Construction and Prior to Notice of Completion
a. All covered and disturbed monuments shall be reset with the same or more durable type of monument as the original, in the surface of the construction.
Key monuments shall be a minimum 1” inside diameter iron pipe of appropriate length.
b.
A monument box or other protective structure is recommended to be placed around key monuments (section corners, quarter section corners). c. The authorized surveyor shall properly completes a Corner Record or Record of Survey for all set monuments with a change in character, including tag number, and submit it to the County Surveyor for review, signature and filing.
A copy shall also be provided to the City prior to the Notice of Completion to provide documentation that the requirement is met.
Redlands Regular Meeting of 02-06-24
653 of 857
SURVEYING 01722-4
B. Overlay Projects
1. Prior To Construction
a. The public survey records are to be researched for the location of all possible survey monuments within the scope of the project and copies shall be furnished to the survey crew.
b.
The survey crew shall diligently search for all survey monuments of record and on the surface of the road. It is suggested the search would include the use of a metal detector. When the detector indicates the possibility of a buried survey monument, then digging below the surface to uncover the monument within 2” of the road surface is recommended.
c. The survey crew shall properly reference found survey monuments, which may be disturbed or covered during construction, to stable surface points. d.
The authorized surveyor shall properly complete a Corner Record or Record of Survey for the monuments noted in item 3, above. Prior to the start of any construction work, the original or a print of the Corner Record or Record of Survey shall be submitted to the County Surveyor for review, signature and filing. A copy shall also be provided to the City prior to the start of construction to provide documentation that the requirement is met.
2. After Construction and Prior to Notice of Completion
a. All covered or disturbed monuments and surface monuments are reset in the new road surface, or a new monument is set in the new road surface above the buried one.
b. All existing monument boxes will be adjusted to grade or replaced, as appropriate.
c. A monument box or other protective structure should be placed around key monuments (section corners, quarter section corners).
d.
The authorized surveyor shall properly complete a Corner Record or Record of Survey for all set monuments and existing monuments with a change in character, including tag number and submits it to the County Surveyor for review, signature and filing. A copy shall also be provided to the City prior to the Notice of Completion to provide documentation that the requirement is met.
C. Slurry Seal Projects
1. Prior To Construction
Redlands Regular Meeting of 02-06-24
654 of 857
SURVEYING 01722-5
a. The public survey records are to be researched for the location of all possible survey monuments within the scope of the project and copies furnished to for the survey crew.
b. All monument boxes shall be located and steps taken to ensure that the survey monuments inside are readily accessible upon completion of the project. c. The survey crew shall diligently searches for survey monuments on the surface of the roadway, and identify said monuments recovered in the field to ensure that they will be protected. The survey crew shall inventory the monuments recovered in the field in a manner that allows for their recovery and inspection after construction.
2. After Construction and Prior to Notice of Completion
a. All monument boxes shall be inspected, and appropriate action taken when needed, to ensure that the survey monuments inside are readily accessible. b.
The survey crew shall review the inventory of found monuments by field inspection to ensure that all survey monuments are clean and exposed. Those monuments covered after construction is completed shall be uncovered.
D. Monument Tie Preservation
1. Prior To Construction
a. All existing survey monument ties within the scope of the project shall be researched and identified prior to construction. Surveyor may obtain existing tie sheets from the City as available.
b. If it is determined that all ties for a survey monument may be disturbed during construction, the Surveyor shall relocate the monument ties prior to construction, within improvements that will not be disturbed, and file the revised tie sheet with the City. A minimum of three tie points should reference each centerline monument, whenever possible
2. After Construction and Prior to Notice of Completion
a. If it is determined that the result of construction will not disturb all survey monument ties for a specific monument, the Surveyor shall replace all monument ties disturbed during construction per the following guidelines:
i. Monument ties shall be placed during the finishing process of the concrete improvements.
ii. Monument ties shall be set below the elevation of the adjacent top of curb to provide protection from any future cleaning, maintenance or work around the tie.
iii. A minimum of three tie points should reference each centerline monument, whenever possible.
Redlands Regular Meeting of 02-06-24
655 of 857
SURVEYING 01722-6
b. Once the construction is complete, the Surveyor shall prepare a revised tie sheet, and file with the City for all monument ties disturbed during the construction.
END OF SECTION
Redlands Regular Meeting of 02-06-24
656 of 857
POTHOLING 01732-1
SECTION 01732 POTHOLING
1.1 THE REQUIREMENT
A. The CONTRACTOR shall conduct exploratory excavations by potholing to verify or to discover the actual locations and the size of existing underground utilities and improvements.
The CONTRACTOR shall take care not to damage existing
facilities during potholing operations. Any utility or existing facility (including those located by Underground Service Alert - USA) within 3 feet of any trench or excavation shall be potholed prior to starting the contract work in the vicinity.
Potholing shall be done in each given area where excavation work is to occur at least thirty (30
) calendar days in advance of any excavation or construction in that area, to avoid possible delay in the progress of the Work.
B. Potholing shall consist of excavations at the locations of utilities or other underground facilities indicated on the Drawings, located by USA, or as directed
by the ENGINEER. All costs of potholing operations for the utilities indicated on the Drawings shall be included in the CONTRACTOR’S
Bid.
C. If an allowance for “Additional Potholing” has been established and included in the SCHEDULE OF WORK AND PRICES, this allowance shall only be used to reimburse the CONTRACTOR for potholing utilities not shown or otherwise referenced on the drawings, or as directed by the ENGINEER. If the total cost of the Work directed under the Additional Potholing allowance differ from the amount set forth in the SCHEDULE OF WORK AND PRICES, the Contract Price shall be adjusted by a Change Order. The adjustment shall be the difference between the total actual costs and the amount included in the Bid, as an additional amount due to the CONTRACTOR or a credit to the CITY, as appropriate.
D. In addition to the potholes indicated on the Drawings, or directed by the ENGINEER, the CONTRACTOR may opt to do further potholing deemed necessary at no additional cost to the CITY.
E. Potholing operations shall conform to all applicable requirements as to sidewall slopes, sheeting and shoring, and all other excavation and trenching provisions specified herein.
F. Potholes shall be identified and protected in accordance with the Engineer’s instructions, the California Manual on Uniform Traffic Control Devices (MUTCD) and Work Area Traffic Control Handbook (WATCH) Standards.
G. The CONTRACTOR’S proposed method of potholing and schedule for potholing shall be submitted to the ENGINEER for approval, at least thirty (30) days prior to the commencement of operation. Any utilities damaged during potholing shall Redlands Regular Meeting of 02-06-24
657 of 857
POTHOLING 01732-2
be immediately reported to the ENGINEER and INSPECTOR and repairs made immediately in accordance with the specifications.
H. A complete log of all potholes shall be kept by the CONTRACTOR, showing specific locations and dimensions of trenches. The log shall be verified by the INSPECTOR prior to the backfilling of the potholes.
The verified log will be
submitted to the ENGINEER and the INSPECTOR within two (2) working days after completion of potholing in each area. Payment for potholing utilities not shown or otherwise referenced on the drawings, or as directed by the ENGINEER will not be made unless these potholes
are listed on the verified log.
I.
The CONTRACTOR shall record the coordinates, elevations and dimensions of all utilities and improvements verified or discovered by potholing. The records shall be submitted to the ENGINEER within two (2) working days after the completion of potholing in each area. The records shall also include dates of the potholing operations and any additional discovered information or pertinent data.
J. Upon completion of potholing in each area, and after verification of the logs by the INSPECTOR, potholes shall be immediately backfilled and compacted in accordance with the specifications, or restored as directed by the ENGINEER.
END OF SECTION
Redlands Regular Meeting of 02-06-24
658 of 857
DEMOBILIZATION 01740-1
SECTION 01740 DEMOBILIZATION
1.1 THE REQUIREMENT
A. General
Whether Demobilization is included as a Contract Bid Item in the Bid Proposal Form or specified as part of the lump sum in the Contract Documents, the cost of labor, equipment, materials and incidentals for doing all the work in demobilization (upon completion of all contract work and not directly attributable to any specific bid item) shall be included in the Contract Price Breakdown and progress payment estimate. If there is no demobilization bid item the CONTRACTOR shall submit to the INSPECTOR for approval the Contract Price Breakdown with the amount established for demobilization.
Demobilization shall include, but not be limited to, the following items, all as required for the proper performance and completion of the Work:
1. Moving off of the Jobsite all of CONTRACTOR’S plant and equipment as required.
2. Dismantling and removing all temporary buildings and other construction facilities.
3. Dismantling and removing all temporary construction power and wiring.
4. Removing all sanitary facilities from the work site.
5. Remove all waste, debris, and rubbish caused by construction operations within the work area, adjacent properties and public roads.
6. Materials and equipment shall be removed from the site as soon as they are no longer necessary. Before the final inspection, the site shall be cleared of equipment, unused materials and rubbish so as to present a satisfactory clean and neat appearance. All cleanup costs shall be included in the CONTRACTOR’S Bid.
7. Dismantling and removal of all temporary fencing.
8. Provide City with all required As-Built drawings.
9. All required Corner Records have been filed with the County and all copies provided to the City
per Section 01722 Surveying.
10. All items noted within the final inspection (“Punchlist”) have been completed to the satisfaction of the City.
Redlands Regular Meeting of 02-06-24
659 of 857
DEMOBILIZATION 01740-2
11. All project photographs as required within Section 01322 Construction Progress Photography have been provided.
12. Notice of Completion (NOC) will not be filed until all work is complete per this Section 01740.
END OF SECTION
Redlands Regular Meeting of 02-06-24
660 of 857
TECHNICAL SPECIFICATIONS
Redlands Regular Meeting of 02-06-24
661 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
662 of 857
PROTECTING EXISTING UNDERGROUND UTILITIES 02222-1
SECTION 02222 PROTECTING EXISTING UNDERGROUND UTILITIES PART 1 - GENERAL
A. Description
This section includes materials and procedures for protecting existing underground utilities.
B. Related Work Specified Elsewhere
1. General Conditions
PART 2 - MATERIALS
A. Replacement in Kind
Except as indicated below or as specifically authorized by the Owner's Representative, reconstruct utilities with new material of the same size, type, and quality as that removed.
B. Vitrified Clay Sewer Pipe and Couplings
For sewer pipe 8 inches in diameter or under, replacement shall consist of plain-end pipe conforming to ASTM C 700. Compression couplings shall conform to ASTM C 594, band seal couplings or equal. Use at least two lengths of pipe in crossing the trench section as shown on the details in the
drawings.
PART 3 - EXECUTION
A. General
1. Replace in kind street improvements, such as curbs and gutters, barricades, traffic islands, signalization, fences, signs, etc., that are cut, removed, damaged, or otherwise disturbed by the construction.
2. Where utilities are parallel to or cross the construction but do not conflict with the permanent work to be constructed, follow the procedures given below and as indicated in the drawings. Notify the utility owner 48 hours in advance of the crossing construction and coordinate the construction schedule with the utility owner's requirements. For utility crossings not shown in the drawings, refer to the General Conditions and the instructions of the Owner's Representative for guidance.
Redlands Regular Meeting of 02-06-24
663 of 857
PROTECTING EXISTING UNDERGROUND UTILITIES 02222-2
3. Determine the true location and depth of utilities and service connections which may be affected by or affect the work. Determine the type, material, and condition of these utilities. In order to provide sufficient lead time to resolve unforeseen conflicts, order materials and take appropriate measures to ensure that there is no delay in work.
4. Expose utilities 1,300 feet in advance of the pipeline construction.
B. Procedures
1. Protect in Place: Protect utilities in place, unless abandoned, and maintain the utility in service, unless otherwise specified in the drawings or in the specifications.
2. Cut and Plug Ends: Cut abandoned utility lines and plug the ends. Plug storm drains and sewers with an 8-inch wall of brick and mortar. Cap waterlines with a cast-iron cap or install a 3-foot-long concrete plug. Dispose of the cut pipe as unsuitable material.
3. Remove and Reconstruct: Where so indicated in the drawings or as required by the Owner's Representative, remove the utility and, after passage, reconstruct it with new materials. Provide temporary service for the disconnected utility.
C. Compaction
1. Utilities Protected in Place: Backfill and compact under and around the utility so that no voids are left.
2. Utilities Reconstructed: Prior to replacement of the utility, backfill the trench and compact to an elevation 1 foot above the top of the ends of the utility. Excavate a cross trench of the proper width for the utility and lay, backfill, and compact.
3. Alternative Construction --Sand Slurry: Sand slurry consisting of one sack (94 pounds) of portland cement per cubic yard of sand and sufficient moisture for workability may be substituted for other backfill materials to aid in reducing compaction difficulties. Submit specific methods and procedures for the review of the Owner's Representative prior to construction.
4. The protection of the utility during construction.
D. Thrust Blocks on Waterlines
Note that restrained joints is the required method of controlling thrust restraint on this project except where shown on the plans or as approved otherwise by the City of Redlands.
1. The Contractor's attention is called to thrust blocks delineated in the drawings for waterlines throughout the project whose thrust is in the direction of the new excavation and, therefore, may be affected by the construction. These waterlines are Redlands Regular Meeting of 02-06-24
664 of 857
PROTECTING EXISTING UNDERGROUND UTILITIES 02222-3
owned and operated by the Owner. Protect thrust blocks in place or shore to resist the thrust by a means approved by the Owner and reconstruct. If the thrust blocks are exposed or rendered to be ineffective in the opinion of the Owner's Representative, reconstruct them to bear against firm unexcavated or backfill material.
2. Provide firm support by backfilling that portion of the trench for a distance of 2 feet on each side of the thrust block to be reconstructed from the pipe bedding to the pavement subgrade, with either:
a. Sand-cement slurry (94 pounds of cement per cubic yard). b.
The native material compacted to a relative compaction of 95%.
3. Then excavate the backfill material for construction of the thrust block.
4. Test compaction of the backfill material before pouring any concrete thrust block.
Use Class 560-C-3250 concrete for reconstruction.
E. Adjacent Parallel Utilities
1. The Contractor's attention is called to utilities throughout the project that are parallel to the proposed utility.
2. The position of these utilities is just outside the new construction. Protect these utilities from any disturbances and repair the lines and associated vaults and appurtenances if they are damaged in any way. All costs incurred for protection of these lines or any costs incurred due to the presence of the lines, whether or not they lie within the new construction, shall be borne in full by the Contractor.
END OF SECTION
Redlands Regular Meeting of 02-06-24
665 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
666 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 1 r ev. 10-11-11
SP-SB-CLNT
PART 1 – GENERAL
1.1 DESCRIPTION
A. StreetBondCL cycle lane coating is a highly specialized coating specifically designed for application onto asphalt pavement to demarcate cycle lanes.
B. StreetBondCL Advanced Coatings for Asphalt are specifically formulated for application to asphalt pavement and have been confirmed by a certified testing facility to possess a balance of performance properties for a durable and color-fast finish.
C. A variety of colors are available, including green and red. Please refer to www.streetbond.com to view these. Custom colors are available upon request as well as LEED compliant colors.
D. StreetBondCL cycle lane coating performance has been tested and verified by an independent recognized testing laboratory. A Certificate of Analysis confirming these test results is available through either an Accredited Applicator or directly from Quest Construction Products (800-541-4383).
Please refer to the certified performance properties of StreetBondCL cycle lane coating outlined in Section 2 of this specification.
E. StreetBondCL coatings are only available from Quest Construction Products, (Tel. 800-541-4383).
F. Qualifications. Only Accredited Applicators may bid for and perform the imprinted portion of this work. Please refer to Section 1.3 DEFINITIONS.
1.2 REFERENCES
A. ASTM D-4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Tester.
B. ASTM D-4060 Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.
C. ASTM D-2697 Standard Test Method for Volume of Nonvolatile Matter in Clear or Pigmented Coatings.
D. ASTM D522-93A Standard Test Method for Mandrel Bend Test of Attached Organic Coatings.
E. ASTM D1653 Standard test method for water vapor transmission or organic film coatings.
F. ASTM G-155 Accelerated Weathering Environment Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
G. ASTM D 2369 Weight Solids Standard test method for Volatile Content of Coatings.
H. ASTM D 1475 Standard Test method for Density of Paint, Varnish, Lacquer, Other related products.
Redlands Regular Meeting of 02-06-24
667 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 2 r ev. 10-11-11
SP-SB-CLNT
I. ASTM D-2240 (2000) Standard Test Method for Rubber property – Durometer hardness.
J. ASTM D-5895 Standard Test Method of drying or curing during film formation of organic coatings using mechanical recorders.
K. ASTM D-570 Standard Test Method for water absorption of plastics.
1.3 DEFINITIONS
A. “Accredited Applicator” has a valid Accreditation Certificate as offered by Quest Construction Products. (Tel. 800-541-4383). StreetBond applicators are reviewed on an annual basis. All Accredited Applicators have been qualified by Quest Construction Products to perform the Work.
B. “Applicator” means the installer of the StreetBond coatings.
C. “Owner” means the Owner and refers to the representative person who has decision making authority for the Work.
D. “Textured asphalt pavement” is asphalt pavement that has been subjected to imprinting or stamping in a specific pattern.
E. “Non-textured asphalt pavement” is asphalt pavement that is unstamped and is sometimes referred to as “flatwork”.
F. The “Work” is the asphalt pavement texturing work contemplated in this bid submission and specification.
G. “Scuffing” is a “tear” of the asphalt pavement caused by an external force.
Stationary vehicle tires turning on the pavement surface is a typical cause.
H. “Layer” is a pass, using the RSG spray gun, that is allowed to dry before the next pass is applied.
1.4 SUBMITTALS
A copy of the Accreditation Certificate, available from the Applicator, is required with submittal.
PART 2 – PRODUCTS
2.1 MATERIALS – STREETBONDCL COATING
StreetBondCL coating has been scientifically formulated to provide the optimal balance of performance properties for a durable, long lasting color and texture finish to asphalt pavement surfaces. Some of these key properties include wear and crack resistance, color retention, adhesion, minimal water absorption and increased friction properties. StreetBond c
oatings are environmentally safe and
meet EPA requirements for Volatile Organic Compounds (VOC).
A. StreetBondCL is a premium epoxy modified, acrylic, waterborne coating specifically designed for application on asphalt pavements. It has a balance of properties to ensure good adhesion and movement on flexible pavement, Redlands Regular Meeting of 02-06-24
668 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 3 r ev. 10-11-11
SP-SB-CLNT
while providing good durability. StreetBondCL is durable in both dry and wet environments.
B. StreetBond Colorant is a highly concentrated, high quality, UV stable pigment blend designed to add color to StreetBondCL. One unit of Colorant shall be used with one pail of StreetBondCL coating material.
2.1.1 Properties of StreetBond coatings
The following tables outline the physical and performance properties of the StreetBond coatings as determined by an independent testing laboratory.
TABLE 1: Typical Physical Properties of StreetBondCL Coatings.
Characteristic Test Specification StreetBondCL
Solids by Volume ASTM D-2697 55%
Solids by Weight ASTM D-2369 68.9%
Density ASTM D-1475 13.34 lbs/gal (1.599 kg/l)
TABLE 2: Typical Performance Properties of StreetBond Coatings Characteristic Test Specification StreetBondCL
Dry time
(To re-coat)
ASTM D-5895
23° C; 37% RH
35 min
Taber Wear
Abrasion Dry
H-10 wheel
ASTM D-4060
1 day cure
0.98 g/1000 cycles
Taber Wear Abrasion
Wet
H-10 wheel
ASTM D-4060
7 days cure
3.4 g/1000 cycles
Accelerated
Weathering
Environment
ASTM G-155
2,000 hours
(CIE Units)
∆E = 0.49
(brick color)
Hydrophobicity
Water absorption
ASTM D-570
8.3%
(9 days immersion)
Shore hardness ASTM D-2240 63 Type D
Mandrel Bend ASTM D522-93A 1/4” @ 21° C
Permeance ASTM D1653 3.45 g/m²/hr
(52 mils)
VOC Per MSDS 23 g/l
Adhesion to Asphalt ASTM D-4541 Substrate Failure
Friction
Wet
ASTM E-303
British Pendulum
Tester
WP* coated 64
WP* uncoated 57
AC** coated 73
AC** uncoated 60
Redlands Regular Meeting of 02-06-24
669 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 4 r ev. 10-11-11
SP-SB-CLNT
*WP – test conducted on asphalt pavement in wheel path
**AC – test conducted on asphalt pavement adjacent to curb.
Certificates of Analysis are available upon request for each of these properties.
2.2 EQUIPMENT FOR STREETBOND APPLICATION
The equipment described has been designed specifically for optimal application of StreetBond coatings. Other equipment may or may not be suitable and could compromise the performance of the StreetBond coatings and/or reduce crew productivity.
A. The Rapid Sprayer II is a proprietary coating sprayer supplied by Integrated Paving Concepts Inc. and is capable of applying the StreetBond coatings to the asphalt pavement surface in a thin, controlled film which will optimize the drying and curing time of the coating.
B. The StreetBond Coatings Mixer is a motorized mixing device designed to ensure efficient and thorough blending of the StreetBond components.
C. The Rapid Finisher II is an electric powered broom supplied by Integrated Paving Concepts Inc. that can be used in the application of StreetBond coatings to improve productivity. It is especially useful on larger projects.
PART 3 - EXECUTION
3.1 GENERAL
StreetBond coating shall be supplied and applied on non-textured asphalt surface by an Accredited Applicator in accordance with the plans and specifications or as directed by the Owner. Do not begin installation without confirmation of an Accreditation Certificate.
3.2 PRE-CONDITIONS
The condition of the asphalt substrate will impact the performance of the StreetBond coatings. A highly stable asphalt pavement free of defects is recommended.
3.2.1 Pre-requisites for new asphalt pavement
A durable and stable asphalt pavement mix design installed according to best practices over a properly prepared and stable substrate is a pre-requisite for all long-lasting asphalt pavement surfaces. The application of StreetBond does not change this requirement.
Redlands Regular Meeting of 02-06-24
670 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 5 r ev. 10-11-11
SP-SB-CLNT
3.2.3 Pavement Marking Removal: recommended guidelines
Pavement markings may be removed by sandblasting, water-blasting, grinding, or other approved mechanical methods. The removal methods should, to the fullest extent possible, cause no significant damage to the pavement surface.
The Owner shall determine if the removal of the markings is satisfactory for the application of StreetBond coatings. Work shall not proceed until this approval is granted.
3.2.4 Surface Preparation
The asphalt pavement surface shall be dry and free from all foreign matter, including but not limited to dirt, dust, de-icing materials, and chemical residue.
3.3 APPLICATION OF STREETBOND COATINGS
3.3.1 StreetBond Coating System Options
T
he selection of the appropriate StreetBond coating or system of coatings and the required number of layers of each is dependent upon the application as outlined here in TABLE 3.
TABLE 3: COATING SYSTEM OPTIONS
Notes:
1. The Applicator can make the final determination of the coating system option to be used for the project.
3 layers StreetBond150
1 layer StreetBond150
over
2 layers StreetBond
CemBase
Very Low Vehicle Traffic
/square4Residential
4 layers StreetBond150
2 layers StreetBond150
over
2 layers StreetBond
CemBase
Low / Medium Vehicle
Traffic
/square4Parking lots
/square4Low traffic crosswalks
/square4Low traffic entries
/square4Level Medians
/square4Cycle paths in traffic
3 layers StreetBond150N/A
No Vehicle Traffic
/square4Pedestrian
/square4Cycle paths
/square4Sidewalks
/square4Plazas
Non Stamped / Textured***
Asphalt surface
Stamped Asphalt surface
No Scuff** concern
Stamped Asphalt
surface
Scuff** concern
3 layers StreetBond150
1 layer StreetBond150
over
2 layers StreetBond
CemBase
Very Low Vehicle Traffic
/square4Residential
4 layers StreetBond150
2 layers StreetBond150
over
2 layers StreetBond
CemBase
Low / Medium Vehicle
Traffic
/square4Parking lots
/square4Low traffic crosswalks
/square4Low traffic entries
/square4Level Medians
/square4Cycle paths in traffic
3 layers StreetBond150N/A
No Vehicle Traffic
/square4Pedestrian
/square4Cycle paths
/square4Sidewalks
/square4Plazas
Non Stamped / Textured***
Asphalt surface
Stamped Asphalt surface
No Scuff** concern
Stamped Asphalt
surface
Scuff** concern
Redlands Regular Meeting of 02-06-24
671 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 6 r ev. 10-11-11
SP-SB-CLNT
2. Additional layers of StreetBondCL may be used to provide additional build thickness in high wear areas such as wheel paths and vehicle turning areas.
3. A maintenance program may be required for applications exposed to:
• scuffing
• abrasive materials (such as salt and sand)
• abrasive equipment (such as snow removal equipment)
3.3.2 Coating Application Guidelines
A. The Applicator shall use the Rapid Sprayer II to apply the StreetBond coatings.
B. The asphalt pavement surface shall be completely dry and thoroughly cleaned prior to application of the coatings.
C. The coating application shall proceed as soon as practical upon completion of the imprinting of the asphalt pavement where applicable.
D. The first layer of coating shall be spray applied then broomed to work the coating material into the pavement surface. Subsequent applications shall be sprayed then broomed or rolled. Each application of coating material shall be allowed to dry to the touch before applying the next layer.
E. The Applicator shall apply the StreetBond coatings only when the air temperature is 50° F / (10° C) and rising and will no t drop below 50° F / (10° C) within 24 hours. No precipitation should be expected within 24 hours.
3.4 COATING COVERAGE & THICKNESS
Recommended coating coverage and thickness is as outlined in TABLE 4 below.
Actual coverage may be affected by the texture of the asphalt pavement substrate and the imprint pattern selected. There will be less coverage with the first layer and higher coverage with subsequent layers.
TABLE 4: COATING COVERAGE AND THICKNESS
COVERAGE (approx.)
THICKNESS (approx.)
# OF LAYERS
TEXTURED
(Offset brick)
SF/pail
NON-
TEXTURED
SF/pail
WET DRY
mm mil mm mil
3 200
225
0.65 25.7
0.36 14.1
4 150
175
0.87 34.3
0.48 18.9
Redlands Regular Meeting of 02-06-24
672 of 857
STREETBONDCL COATING APPLICATION TO
NON-TEXTURED ASPHALT PAVEMENT SPECIFICATION
www.streetbond.com 7 r ev. 10-11-11
SP-SB-CLNT
3.5 OPENING TO TRAFFIC
Minimally, the surface coating must be 100% dry before traffic is permitted. The following table is a guide:
3.6 EDGE STRIPING
Once StreetBondCL cycle lane coating has dried, a hot spray applied white stripe may be installed along the edge of the bike path if desired.
TABLE 5: COATING DRY TIMES (TYPICAL)
If StreetBond coatings are applied when moisture cannot evaporate, then the coating will not dry. The drying and curing of StreetBond coatings have a direct impact on performance.
PART 4 – MEASUREMENT AND PAYMENT
4.1 MEASUREMENT
The measured area is the actual area of asphalt pavement where StreetBond has been applied, measured in place. No deduction will be made for the area(s) occupied by manholes, inlets, drainage structures, bollards or by any public utility appurtenances within the area.
4.2 PAYMENT
Payment will be full compensation for all work completed as per conditions set out in the contract. For unit price contracts, the payment shall be calculated using the measured area as determined above.
Coating Dry Time (Laboratory)
This graph shows the increase in
drying time when temperatures are
lower.
Environmental factors such as
sunlight and wind play a major role
in drying.
Time in hours
Drying(% of water evaporated)
Coating Dry Time (Laboratory)
This graph shows the increase in
drying time when temperatures are
lower.
Environmental factors such as
sunlight and wind play a major role
in drying.
Time in hours
Drying(% of water evaporated)
Redlands Regular Meeting of 02-06-24
673 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
674 of 857
APPENDIX
Redlands Regular Meeting of 02-06-24
675 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
676 of 857
APPENDIX A
CHECKLIST OF LABOR LAW REQUIREMENTS
Redlands Regular Meeting of 02-06-24
677 of 857
THIS PAGE INTENTIONALLY LEFT BLANK
Redlands Regular Meeting of 02-06-24
678 of 857
CHECKLIST OF LABOR LAW REQUIREMENTS
TO REVIEW AT JOB CONFERENCE MEETINGS
Name (print) Date
Company Project
The Federal and State labor law requirements applicable to the contract are composed of, but not limited to, the following:
1. Payment of Prevailing Wage Rates
The contractor to whom the contract is awarded and its subcontractors hired for the public works project are required to pay not less than the specified general prevailing wage rates to all workers employed in the execution of the contract. The contractor is responsible for ascertaining and complying with all current general prevailing wage rates for crafts and any rate changes that occur during the life of the contract.
Information on all prevailing wage rates and all rate changes are to be posted at the job site for all workers to view.
2. Apprentices
It is the duty of the contractor and subcontractors to employ registered apprentices on the public works project under Labor Code Section 1777.5.
3. Penalties
There are penalties required for contractor's/subcontractor's failure to pay prevailing wages and for failure to employ apprentices, including forfeitures and debarment under Labor Code Sections 1775; 1776; 1777.1; 1777.7 and 1813.
4. Certified Payroll Reports
Under Labor Code Section 1776, contractors and subcontractors are required to keep accurate payroll records showing the name, address, social security number and work classification of each employee and owner performing work; also the straight time and overtime hours worked each day and each week, the fringe benefits, and, the actual per diem wage paid to each owner, journey person, apprentice worker or other employee hired in connection with the public works project. Employee payroll records shall be certified and shall be made available for inspection at all reasonable hours at the principal office of the contractor/subcontractor, or shall be furnished to any employee, or his/her authorized representative on request, pursuant to Labor Code Section 1776. Each contractor and subcontractor shall submit its weekly certified payroll reports to the LCR from the agency no less than weekly or within ten days of request. In the event that there has been no work performed during a given week, the certified payroll report shall be annotated: "No work" for that week. Under Labor Code Section 1776(h) there are penalties required for contractor's/ subcontractor's failure to maintain and submit copies of certified payroll records on request. **For projects bidding after April 1, all contractors will need to upload their certified payroll to the Department of Labor Standards Enforcement website. Effective Jan. 1, 2016, ALL projects will require contractors to upload all certified payroll. This requirement is in addition to the request for payrolls by the City of Redlands;
5. Nondiscrimination in Employment
There exist prohibitions against employment discrimination under Labor Code Sections 1735 and 1777.6, the Government Code, the Public Contracts Code, and Title VII of the Civil Rights Act of 1964.
6. Kickbacks Prohibited
Contractors and subcontractors are prohibited from recapturing wages illegally or extracting "kickbacks" from employee wages under Labor Code Section 1778.
Redlands Regular Meeting of 02-06-24
679 of 857
7. Acceptance of Fees Prohibited
There exists a prohibition against contractor/subcontractor acceptance of fees for registering any person for p
ublic work under Labor Code Section 1779; or for filling work orders on public works contracts pursuant to Labor Code Section 1780.
8. Listing of Subcontractors
All prime contractors are required to list properly all subcontractors hired to perform work on the public w
orks projects covering more than one-half of one percent, pursuant to Government Code 4100 et seq.
9. Properly Licensed and Registered
Contractors are required to be licensed properly and to require that all subcontractors be properly licensed.
P
enalties are required for employing workers while unlicensed under Labor Code Section 1021 and under the California Contractor License Law found at Business and Professions Code Section 7000 et seq.
Contractors and subcontractors are also required to be registered with the Division of Labor Standards Enforcement to work on public works projects in California. Requirements for registration and penalties for not being registered are found in Labor Code 1773.3.
10. Unfair Competition Prohibited
Contractors and subcontractors are prohibited from engaging in unfair competition as specified under B
usiness and Professions Code Sections 17200 to 17208.
11. Workers Compensation Insurance
Labor Code 1861 requires contractors and subcontractors be insured properly for workers compensation.
12. OSHA
Contractors and subcontractors are required to abide by the Occupational, Safety and Health laws and r
egulations that apply to the particular construction project.
13. Undocumented Workers
Contractors and subcontractors are prohibited by the Federal government against hiring undocumented w
orkers, and must secure proof of eligibility/citizenship from all workers.
14. Itemized Wage Statements
Contractors and subcontractors must provide itemized wage statements to employees per Labor Code 226.
I
n accordance with Federal and State laws and with th e awarding agency contract documents, t he undersigned prime contractor wishes to assure the City of Redlands that it intends to comply with the above-referenced labor law requirements, fully understanding that failure to comply with the above requirements may subject it to penalties as provided above.
Co
ntractor City of Redlands
N
ame Printed Name Printed
Signature Signature
Title Title
D
ate Date
Redlands Regular Meeting of 02-06-24
680 of 857
IMPORTANT NOTICE
New Requirements for Contractors Working on California
P
ublic Works / Prevailing Wage Projects
Si
gnificant changes in prevailing wage law have recently been made that affect all contractors working on Public Works Projects within California. Please note the following important information:
CONTRACTOR REGISTRATION REQUIREMENT
By April 1, 2015, all contractors must be registered with the Division of Labor Standards Enforcement (DLSE) to work on public works projects in California.
WHO must register?
All contractors and subcontractors working on public works projects in California must be registered. This includes prime contractors, subcontractors and sole owner/operators- everyone performing labor on a public works project.
WHEN is registration required?
Contractors must be registered with the DLSE to bid on all public works projects that bid after March 1, 2015.
All contractors working on public works projects must be registered by April 1, 2015. Registration is valid until June 30 of each year and may be renewed annually. Registrations are currently being accepted.
WHERE do I register?
Registration is done online at:
https://efiling.dir.ca.gov/PWCR/ActionServlet?action=displayPWCRegistrationForm HO
W MUCH is the fee?
Contractor registration fee is currently set at $300 but may increase each year. This fee shall be paid during the initial registration and each annual renewal.
DO I qualify for registration?
Contractors will need to meet minimum qualification standards to be registered. These include:
• Be properly licensed with the Contractors State Licen se Board for your trade.
• Provide evidence of workers compensation insurance (i f applicable). • Be in good standing (Have no outstanding liabilities for wages, damages, penalties due to an employee or the State, may not be under State or Federal debarment).
Redlands Regular Meeting of 02-06-24
681 of 857
WHAT happens if I don’t register?
Unregistered contractors working on or bidding for public works projects will be subject to an immediate $2,000 fine and the $300 registration fee to continue working on the project. Unregistered contractors may be removed from the project by the Awarding Agency. Contractors found working on public works projects without being registered also risk not being approved for registration by DLSE.
ELECTRONIC CERTIFIED PAYROLL REPORTING REQUIREMENTS
Prevailing wage law has been changed to require contractors to submit certified payrolls electronically to the DLSE.
WHO is required to submit certified payrolls?
All contractors, subcontractors and sole owner/operators will be required to submit certified payrolls electronically to the DLSE.
WHEN do I need to submit certified payrolls electronically? If your project is awarded after April 1, 2015, electronic payroll submission is required immediately.
Otherwise, electronic payroll submission will be required for all projects awarded on or after January 1, 2016.
WHERE do I submit my certified payrolls?
For now, certified payrolls can be submitted by contractors to the DLSE at:
https://apps.dir.ca.gov/ecpr/DAS/AltLogin This website address will change when the DLSE implements their online electronic database system which still has not been developed. Alliant will notify contractors when this system is available.
DO I still need to submit hard copy certified payrolls? The City of Redlands will still require hard copy submission of certified payroll reports per your contract. The requirement to submit certified payrolls electronically to the DLSE does not replace the requirement for contractors to submit payrolls to the City of Redlands.
Contact the City of Redlands regarding any questions you may have regarding the new requirements for contractor registration or online submission of certified payroll: (909) 798-7698.
Redlands Regular Meeting of 02-06-24
682 of 857
PUBLIC WORKS CONTRACT AWARD INFORMATION (DAS-140)
This is not a request for dispatch of apprentices.
Contract award information must be sent to your Apprenticeship Committee if you are approved to train. If you are not approved to train, you must send the information (which may be this form) to ALL applicable Apprenticeship Committees in your craft or trade in the area of the site of the public work.
Go to: http://www.dir.ca.gov/das/PublicWorksForms.htm for information about programs in your area and trade. The information shall be provided to the applicable apprenticeship committee within ten (10) days of the date of the execution of the prime contract or subcontract, but in no event later than the first day in which the contractor has workers employed upon the public work.
Do not send this form to the Division of Apprenticeship Standards.
NAME OF YOUR COMPANY CONTRACTORS STATE LICENSE NO.
MAILING ADDRESS-NUMBER & STREET, CITY, ZIP CODE AREA CODE & TELEPHONE NO.
NAME AND ADDRESS OF PUBLIC WORKS PROJECT DATE YOUR CONTRACT WAS EXECUTED
DATE OF EXPECTED/ACTUAL START OF PROJECT
NAME & ADDRESS OF PUBLIC AGENCY AWARDING CONTRACT ESTIMATED NUMBER OF JOURNEYMAN HOURS
OCCUPATION OF APPRENTICE
THIS FORM IS BEING SENT TO: (NAME AND ADDRESS OF APPRENTICESHIP PROGRAM(S) ESTIMATED NUMBER OF APPRENTICE HOURS
APPROXIMATE/ACTUAL DATES TO BE EMPLOYED
This is not a request for dispatch of apprentices.
*Contractors must make a separate request for actual dispatch, in accordance with Section 230.1(a) California Code of Regulations* Check One of the Boxes Below
1. We are already approved to train apprentices by the
Apprenticeship Committee. We will employ and train under their standards. (Enter name of Committee)
2. We will comply with the standards of
Apprenticeship Committee for the duration of this job only. (Enter name of Committee)
3. We will employ and train apprentices in accordance with the California Apprenticeship Council regulations, including § 230.1 (c) which requires that apprentices employed on public projects can only be assigned to perform work of the craft or trade to which the apprentice is registered and that the apprentices must at all times work with or under the direct supervision of journeyman/men.
Signature Date
Typed Name
Title
Redlands Regular Meeting of 02-06-24
683 of 857
2J
DAS-140 FORM - PUBLIC WORKS CONTRACT AWARD INFORMATION
(Title 8, California Code of Regulations, Section 230)
(California Labor Code, Section 1777.5 (e))
SUBMIT CONTRACT AWARD INFORMATION
Prior to commencing work on a contract for Public Works every Contractor shall provide contract award information to the apprenticeship committee for each applicable apprenticeable craft or trade in the area of the site of the public works project that has approved the contractor to train apprentices. Contractors who are not already approved to train by an apprenticeship program sponsor shall provide contract award information to all of the applicable apprenticeship committees whose geographic area of operation includes the area of the public works project. This contract award information shall be in writing on a DAS Form 140, Public Works Contract Award Information or a letter which includes the following information:
(1) Contractor's name, address, telephone number and state license number; (2) The full name and address of the public work awarding agency; (3) The exact location of the public work site;
(4) Date of the contract award;
(5) Expected start date of the work;
(6) Estimated journeyman hours;
(7) Occupation of Apprentice;
(8) Approximate number of apprentices to be employed; and (9) Approximate dates apprentices will be employed.
This information shall be provided to the applicable apprenticeship committee within ten (10) days of the date of the execution of the prime contract or subcontract, but in no event later than the first day in which the contractor has workers employed upon the public work.
Failure to provide contract award information, which is known by the awarded contractor, shall be deemed to be a continuing violation for the duration of the contract, ending when a Notice of Completion is filed by the Awarding Body, for the purpose of determining the accrual of penalties under Labor Code Section 1777.7.
THE TOP SECTION OF THE FORM COMPLETELY FILLED OUT will provide the information required pursuant to California Labor Code Section 1777.5 and California Code of Regulations Section 230.1.
LOWER SECTION OF THE FORM Check an appropriate box (#1, 2 or 3) for your status.
In addition to the “ORIGINAL(S)” mailed to all applicable Apprenticeship Committees, a copy of this information shall also be submitted to the City of Redlands.
NOTE: The filing of a DAS 140 is not a request for the dispatch of registered apprentices Redlands Regular Meeting of 02-06-24
684 of 857
CONTRACTOR FRINGE BENEFIT STATEMENT
Project Name: Project Location: Today’s Date:
Contractor / Subcontractor Name: Business Address:
In order that the proper Fringe Benefit rates can be verified when checking payrolls on the above contract, the hourly rates for fringe benefits, subsistence and/or travel allowance payment made for employees by the employer on the various classes of work are tabulated below. Please Include Apprentice Rates.
Classification: Effective Date:
Subsistence or Travel Pay:
$________________________
EMPLOYER PAID FRINGE BENEFITS
Health & Welfare
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Pension
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Vacation/Holiday
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Training
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Other
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Classification: Effective Date:
Subsistence or Travel Pay:
$________________________
EMPLOYER PAID FRINGE BENEFITS
Health & Welfare
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Pension
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Vacation/Holiday
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Training
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Other
$_______________ hr
Paid To:
Name of Plan/Fund/Program:
Address:
__________________________________________________
__________________________________________________
Supplemental statements must be submitted during the progress of the work should there be an increase or change in rates. Use additional sheets as necessary. (Attach a copy of your most recent premium transmittal (including copy of check submitted) into each of the above plans/funds/programs or a letter from the above plans/funds/programs reflecting current payment status).
I certify under penalty of perjury that fringe benefits are paid to the approved plans, funds or programs as listed above.
Print Name and Title Signature and Date (Wet Signature Required)
Redlands Regular Meeting of 02-06-24
685 of 857
S = STRAIGHT TIME *OTHER – Any other deductions, contributions and/or payments whether or not included or required by prevailing C ERTIFICATION MUST be completed Form A-1-131 (New 2-80) O = OVERTIME wage determinations must be separately listed. Use extra sheet(s) if necessary (See reverse side)
SDI = STATE DISABILITY INSURANCE
California
Department of
Industrial Relations
Page ______ of ______
NAME OF CONTRACTOR: CONTRACTOR'S LICENSE NO.: ADDRESS:
OR SUBCONTRACTOR: SPECIALITY LICENSE NO.:
PAYROLL NO.:
FOR WEEK ENDING:
S
ELF-INSURED CERTIFICATE NO.:
PROJECT OR CONTRACT NO.:
(4)
DAY
(5)
(6)
WORKERS' COMPENSATION POLICY NO.:
PROJECT AND LOCATION:
(
2)
M
T
W
TH
F
S
S
(9)
DATE
(1)
NAME, ADDRESS AND
SOCIAL SECURITY NUMBER
OF EMPLOYEE
NO. OF WITH-
HOLDING
EXEMPTIONS
(3)
WORK
CLASSIFICATION
H
OURS WORKED EACH DAY
T
OTAL
HOURS
HOURLY
RATE
OF PAY
(7)
GROSS AMOUNT
EARNED
(8)
DEDUCTIONS, CONTRIBUTIONS AND PAYMENTS
NET WGS
PAID FOR
WEEK
C
HECK
NO.
THIS
P
ROJECT
ALL
P
ROJECTS
FED.
T
AX
FICA
(
SOC. SEC.)
STATE
T
AX
S
DI
VAC/
H
OLIDAY
HEALTH
&
WELF.
P
ENSION
S
T
RAING.
F
UND
ADMIN
D
UES
TRAV/
S
UBS.
S
AVINGS
O
THER*
TOTAL
D
EDUC-
TIONS
O
THIS
P
ROJECT
ALL
P
ROJECTS
FED.
T
AX
FICA
(
SOC. SEC.)
STATE
T
AX