Redondo Beach City Council
October 4, 2022

Intelligent
ward Telematics and Fuel Control

SERVICE CALL CENTER AND SUPPORT AGREEMENT

BETWEEN
E. J. WARD, INC.

AND

CITY OF REDONDO BEACH
531 N. GERTRUDA AVENUE
REDONDO BEACH, CA 90277
The Agreement detailed herein defines the entire service provided for continuous, trouble-free operation of the Hardware and Software purchased from EJ Ward Inc.

This agreement may be modified in writing subject to the approval of both parties. Furthermore, either party may cancel in part or all of this agreement with sixty ( 60) days written notice of intent to cancel.

Canceling this agreement does not revoke any rights conveyed in the use of the Hardware and Software pursuant to the terms and conditions contained in the End User License Agreement attached.

Definitions;
City of Redondo Beach, for this agreement shall be known as the " Buyer". f.J. Ward. Inc for this agreement shall be known as the" Seller" or" EJW".

Fxeessive, is defined for the purpose of this agreement as time spent beyond what is considered acceptable, proper, usual, or necessary to solve the problem solely based on the judgment of the seller".

Normal business hours for the purpose of this agreement are defined as Monday—Friday, 8 am5pm. CST, excluding Local, State, and Federal holidays. preferred Rates for the purpose ofthis agreement are defined as those rates in the current published price book defined as 10% off list for customers who maintain a Platinum Plan to include Software and Hardware supplied by" EJW".

Overtime Rates, for the purpose of this agreement arc defined as charges equal to 1. 5 times the. base rate( preferred or otherwise) for work performed after normal business hours, on weekends or holidays.

On- site Overtime Service Rates for the purpose of this agreement are defined as charges equal to

1. 5 times the base rate ( preferred or otherwise) for work performed after normal business hours, weekends, or holidays with a minimum of three ( 3) hours. Food, travel or other direct costs are not included.

System support will be provided as set forth in the following sections:

Extent of Coverase;
I. " EJW" shall provide the` Buyer" service call support on a 24 hour/ 7- days per week basis

2. " Buyer" will use the" EJW" Support Number to report an issue. Service requests to" EJW" will be broken into one of 2 categories by the" Buyer" caller: ( I) Phone support; or( 2) Site support.

Buyer" must contact "EJW" directlyfor all Support and On-site repair requests. /f"Buyer" contacts a third- party service provider directly, " Buyer" is responsible for payment directly to the third party for all parts and services performed by the thirdparty service provider, even ifthat provider is a local authorized or certified" EJW" service and repairprovider.

Page I 1 E. J. Ward Inc. Service, Call Center and Support Agreement P+i" fir'
Intelligent
ward
Telematics and Fuel Control
Phone support - Support Number: 1- 800-580- WARD ( 9273) or email support&, ejward. com ( email for non- emergency support only during normal business hours: Monday-Friday 8am-5pm CST)

1. This service will be provided 24/7 per terms outlined in each plan option

2. " On- site" Emergency service after hours is available as required EJW" will return the service call within the followinp time requirements:

1. Four ( 4) hours to the number provided in the service call between the hours of 8 am- 5 pm Monday- Friday Central Time; or

2. Eight( 8) hours to the number provided in the service call report during Evenings, Weekends and Federal Holidays.

Process: The call center operator will record each service request by ticket # and record the problem in writing. The operator will contact the on- call service technician. Should the on-call technician not be reached within 4 hours, the back- up on- call technician will be contacted. In the event, the back-up technician is not available; the Regional Field Service Manager will be contacted.

Reported issues will he addressed in the following manner:

I. Priority I — Requires immediate attention as performance is unreasonably degraded ( i. e. the system is completely down). Every effort will be made in providing an immediate resolution.

Issue resolution is normally no more than forty-eight (48) hours.

2. Priority 2 — Requires urgent action, as failures are extremely inconvenient ( i. e. a site is down).

Every effort will be made to provide a resolution as soon as possible, in most cases, within five 5) Business days.

3. Priority 3 — Requires routine action, as failure is only somewhat inconvenient. Resolution will be provided as soon as possible and in most cases within fourteen ( 14) businessdays.

Site Sunport On- site service within the following time requirements and limitations described will be provided:

1. 12 - 24 hours if service request between the hours of 8 am& 5 pm Monday—Friday; or

2. 24 - 48 hours if service request between the hours of 5: 01 pm& 7: 59 am Monday—Friday; or

3. 24 - 48 hours if service request between the hours of 4:01 pm Friday& 7: 59 am Monday; or

4. 24 - 48 hours if service request occurred on any Local, State or Federal Holiday.

5. Five ( 5) business days for locations with either:
a. No local authorized service technician; or
b. Air travel is required to support the location
Exchange Policy: Exchange and/ or repair of components is two to three ( 2/ 3) days after the receipt of the items in need of repair or exchange or after the receipt of a request for shipment( RMA) if there is no exchange or repaired board available. Customer's exchange and shipment to Ward must comply with Ward's Return Material Authorization ( RMA) policy and reference a ticket number assigned by " EJW" Technical Support.

JWard
Intelligent Telematics and Fuel Control
Service Limitations: " EJW" cannot be deemed non-compliant with service requirements inclusive, but not limited to the following conditions:

1. Acts of Cod and Man Made Events Disruptions caused by heavy rains, earthquakes, flooding, tornadoes, lightning strikes, hurricanes, fires, snow, ice, sleet, or road closures and detours caused by Town, City or State construction projects where normal street or interstate traffic patterns to the customer site are disrupted or stopped.

2. Non- access- Situations where " EJW" technicians arc denied access to the fuel terminal sites due to locked fences, blocked passages, or no one answering the phone number provided to the service call operator.

3. Malicious Acts: Inclusive of vandalism, theft, gunshots, rock throwing, fire, and anywhere damage is not attributable to normal, fair wear and tear of hardware components.

4. Negligence. Inclusive of third party contractors hired by the " Buyer" to perform fuel site maintenance that would impair the performance of" EJW" equipment by disrupting electrical service or making non-authorized adjustments or modifications to" EJW" installed hardware or terminals.

5. procedural Changes. Inclusive of the" Buyer" changing the manner in which their employees interact with the" EJW" fuel automation hardware. These changes may require systemic changes which arc reasonably outside the normal software maintenance activities i. e., operating systems" OS", business rules or software customization requests).

6. Non-" EJW" Equipment or Systems Failure: Inclusive of but not limited to; " EJW" dispatching a technician and the cause of incident is found to be other than an agreement covered product. Standard published pricing will apply for authorized repairs.

Service Resnonse versus Service Repair: " EJW" will meet the service response requirements as defined in this agreement. The actual time to repair your equipment however, cannot be determined or controlled by the response time period. Each service incident will require analysis to determine the failure, actual repair, and testing to confirm the unit is working within specifications. In special cases, the repair may require unique parts which will require additional time to obtain.

Definition of Maintenance: Under the terms of this agreement with the " Buyer", " EJW" agrees to provide contracted for maintenance activities to address normal fair wear and tear issues found with the normal use of the equipment
Fxamnles of non- covered equipments
I. Dispensers, Pumps and Pulsers 11. Vehicles or Fleet Assets

2. Tank Level Monitoring( TLS) 12. CANceiver, VIT, Cables

3. Electrical System or GPS antenna

4. Network( TCP/ IP) 13. EM- Tag or Ring Antenna

5. Moxa 508A Network Switch 14. All hardware, and software

6. Wi- Fi Access Points versions of the Jettscan or

7. Servers( Virtual or Physical) vehicle device programmers

8. CAT 5 Cable, Routers, Bridges 15. Cards, Datakeys, Fobs,

9. Cabinet, Base, Lock Assembly Encoders, Embossers, Printers

10. Hose Modules 16. Equipment& Software Upgrades
eamous.

and Intelligent Telematics and Fuel Control
Third Party Hardware Sunnort: " EJW" agrees to provide " Buyer" with limited technical support in troubleshooting problems associated" Third-Party" or " Non-Covered" hardware or software. " EJW" will consult with representatives ofother support organizations, ifrequired.

If the time required to resolve third party issues is excessive, " Buyer" will be contacted for authorization to proceed before charges will be incurred by` Buyer".

Hardware Covered: Included in this coverage are the hardware components of the Fuel Control Terminal ( FCT) that were installed as part of the Automated Fuel Management System ( AFMS) either by" EJW" Technicians or a certified Contractor Technician.

1. Field modifications, additions or changes to the hardware without written authorization or approval by" EJW" may void this agreement.

2. EJW is not liable if parts arc no longer available due to end of life( EOL) or not available from subcomponent suppliers for any hardware covered under this agreement.

Extent of Software Coverage: " EJW" will ensure the proper operation of all " EJW" copyrighted software programs and their interface to external programs previously installed by" EJW".

Software yngrades are not included( examples are W3.x to W4.x or Access to SQL or to Oracle or any other combination).

Software Covered Included in this coverage arc the following " EJW" copyrighted software programs installed on the server/ servers and backup system, including but not limited to:

1. Fuel View Software, communication programs, listeners and parsers

2. Database Interface Programs written by" EJW"

3. Business Rule Operating Systems" OS"

4. Reports, Screens, Scripts and Data Files
Jtems Not Covered:" Buyer" supplied or 3rd Party supplied software, computer or network equipment not specifically contracted for under this agreement. Non-covered software and equipment include:

1. Servers, Laptop and Desktop computer hardware

2. Support for Server/ PC Moves/ Transfers of the application software or Databases

3. Network Hardware

4. Third Party Software, Operating Systems and Relational Databases It is " Buyer' s" responsibility to update and maintain all updates, patches and fixes for 3rd party software and databases. " Buyer" responsibility includes, but is not limited to:

I. Microsoft and Oracle Operating Systems

2. Microsoft and Oracle Database updates

3. Java updates

awoom,
4n uRtFF{'
Ward•
lntelligentTelemalics and Fuel Control
Third Party Software Support;
EJW" agrees to provide the " Buyer" with limited technical support in resolving problems associated with third party operating systems, database and network problems. " EJW" will consult with representatives of other support organizations as necessary.

1. If the time required to resolve external issues is excessive, " Buyer" will be contacted for authorization to proceed.
disaster Recovery: It is " Buyer' s" responsibility to provide enterprise and / or system level disaster recovery in accordance with its own information technology standards and business risk requirements.

1. " EJW" shall provide assistance to` Buyer" in the absence of IT standards recommend best practices. Assistance will be limited to best practice recommendations only.

Vehicle Equinment: " EJW" will provide phone support only for issues pertaining to Vehicle Mounted Equipment, Hose Module, EM- Tag, and JettScan.

1. On- site service and replacement of this equipment will be billed separately at the labor rates listed in current price book.

Price Book.

Unless otherwise described herein, all rates, including labor, software, hardware, and equipment shall be published in the" EJW" price book, which is attached hereto and incorporated by this reference and released annually on January 1. In the event that any terms other than the rates in the price book are modified, EJW shall provide forty-five( 45) days prior written notice to Buyer of these modifications. Buyer shall have the option to terminate this agreement within thirty days of receipt of the written notice.

Miscellaneous Additional Conditions: Additional equipment may be added to this agreement at any time; existing Warranty will be taken into consideration. Initial repairs, when required to qualify for addition to this Agreement, are based solely on the judgment of" EJW" and will be billed separately at the published labor rates, and then current list price of parts; unless a separately negotiated parts price is enforce. Future Support Agreement costs will be adjusted to reflect additional equipment as needed.

Based on the judgment of" EJW" in that the fuel site is not un to California Electrical Code." EJW" inn refuse adding, pr removing equipment from this agreement based on the fuel site' s serviceability: provide& however. it provides written notice to the Buyer and allows thirty( 30) days 1 1 • i 1 1 1 ' I • I 1 1 . 1 1 .. 1 '.. 1 1 '
Shipping- The standard method of shipping is by ground for this agreement, for additional information refer to" EJW"' s published price book for shipping information:

1. " Buyer" may request expedited shipments such as" next day" or" two day" for additional cost.

2. " EJW" shall retain the sole right to use those expedited methods to insure system up time at its cost when " EJW" determines such actions are warranted under this agreement and its use does not establish precedent for future shipments.

Sites greater than one hundred ( 100) miles from service center: Location of hardware or software requiring service or support on- sites greater than 100 miles from an " EJW" office or service center shall be subject to additional technician time and travel costs based on its current published price book.

Distances for invoicing are verified using" Google Maps" routing on a round trip basis.

etNocp
r_Intelligent
Ward
Telematics and Fuel Control
platinum Plan Agreement Pricing
Includes Annual Call Center Support and Hardware, Service, & Parts 10% off list price based on EJW current published price book related to Labor, Software and Hardware for items not covered under this agreement( only one discount shall be applied towards purchase. Third Party contract purchases excluded)
Annual Call Center Snnnort Fee
Ensures the proper operation of the " EJW" Software, communication programs, listeners and parsers, Database Interface Programs written by " EJW", Business Rule Operating Systems " OS", Reports, Screens, Scripts and Data Files
Includes scheduled and periodic updates, fixes, and patches as released within the customer' s current version of Fuel View Software.

Unlimited calls per month; 24x7 Call Center support for Software and Hardware supplied by" EJW" Total—Call Center Support Fee=$ 4 500
Jiardware Service.& Parts Prieine- Animal
Only" EJW" FCTs less than ten( 10) years old or under previous support agreement.

EJW" FCTs greater than ten ( 10) years old may require inspection, consult factory for pricing.

EJW" cannot be held liable if parts are no longer available due to end of life( EOL) or unavailable from subcomponent suppliers for its product lines.

On- site, Labor and Parts included
a. $ 96 per Fuel Control Terminal (FCT-W4-05H) per month- ($ 1, 152 per year each) Sites over 100 miles from an " EJW" office are subject to additional technician time and travel costs.

Number of Fuel
Control Annual Annual Phone Total Five Year
Year Terminals Hardware Support Agreement Cost
1 , 1 1, 152. 00 4,500 5, 652. 00
2 1 1, 209.00 4,725 5, 934.00
3 1 1, 269.00 4,961 6, 230.00
4 1 1, 332.00 5, 209 6, 541.00
5 1 1, 399.00 5, 469 6,868.00
Platinum Plan 6,361. 00 20,364 26,725.00
Additional Hardware may be added and priced separately for parts and labor support.

Notwithstanding the foregoing, in the event additional costs are incurred, the total compensation for EJW" shall not exceed $ 30,733. 75

Ayx1
r"--
Intelligent
Ward
Telematics and Fuel Controll
If" Buyer" or E.J. Ward System owner and/or their third-party service provider chooses to terminate or not carry a Service and Support Agreement; telephone support, On- site service, or work performed at E. J. Ward' s San Antonio Texas service facility will be provided at the rates published in the current price book for labor, software and hardware. j,imitation of liability: Once products sold or provided under this agreement by E. J. Ward, Inc. are delivered to" Buyer"," Buyer" will be responsible for results caused by Buyer' s misuse of the products. In no event shall E. J. Ward, Inc., or its directors, officers, employees, agents, or affiliates, be liable to the Buyer" or to any third party for: (i) any lost profits, any data loss, any loss of business, or any indirect, consequential, exemplary, incidental or special losses or damages of any kind or nature whatsoever arising out of Buyer' s misuse of the products; or ( ii), any losses or damages of any kind or whatsoever, including personal injury or death, arising out of" Buyer' s" or a third party' s misuse, use, The sole and exclusive remedy of" Buyer" or any third party for any claim, loss, or damage will be limited to repair or replacement of such products sold or provided under the terms of this agreement to " Buyer" by E.J. Ward, Inc. .
indemnification: EXCEPT AS OTHERWISE PROVIDED BY ANY PORTION OF THE

AGREEMENT NEITHER PARTY WILL BE LIABLE TO THE OTHER FOR SPECIAL, INDIRECT

OR CONSEQUENTIAL DAMAGES INCURRED OR SUFFERED BY THE OTHER ARISING AS A RESULT OF OR RELATED TO THE USE OF THE HARDWARE or SOFTWARE, WHETHER IN

CONTRACT, TORT OR OTHERWISE, EVEN IF THE OTHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.

Venue: This Agreement shall be governed by and construed in accordance with the internal laws of the State of California without giving effect to any choice or conflict of law provision or rule ( whether of the State ofCalifornia or any otherjurisdiction) that would cause the application of laws of any jurisdiction other than those of the State of California. Any legal suit, action or proceeding arising out of or related to this Agreement or the matters contemplated hereunder shall be instituted exclusively in the courts within the State of California, county of Los Angeles, California, and each party irrevocably submits to the exclusive jurisdiction of such courts in any such suit, action or proceeding and waives any objection based on improper venue or forum non conveniens.

If any term or provision of this Agreement is invalid, illegal or unenforceable in any jurisdiction, such invalidity, illegality or unenforceability shall not affect any other term or provision of this Agreement or invalidate or render unenforceable such term or provision in any other jurisdiction.

eaN try" PI
V-0,)
Intelligent
Ware Telematics and Fuel Control
This Call Center, and Support Agreement is effective March 12, 2019 continuing to March II, 2024 Term):.

Annual Payment for the Service, Call Center and Support Agreement to be made within 30 days of expiration of the initial Warranty Period, Agreementstart date, or priorto Service, Call Center and Support Agreement expiration date, whichever is applicable.

IN WITNESS WHEREOF, the parties have executed this Agreement by their duly authorized representatives.

City of RedondoBeachII E.J. Ward, Inc.

Accepted By Via,.A m L- t 4RJ Lf Ratified ByI-es Lc t7( C
etsCM,
Signature
Title_ W\et( Title (" Welt c 4r•rhiAn t tta-A-csg r
Date trb`lel Date 6&LLC,f
j
a) as, q
APPROVED.A O FOR
w•
GIl ATTORNEYACE APPR['/i'l'`:'D
BY. DATE)r"ll
ATTEST:
2Pia

ELEANOR MANZA , CAI, CLERK
Page.18 E. J. Ward Inc. Service, Call Center and Support Agreement 11/ 4 ur..

V---
Intelligent
ward
Telematics and Fuel Control
End of Document

dwQwtb
1 Ant
is
Air''
P,. , Ware
Telematics and Fuel Control
2019 Manufacturer
Suggested Retail
P•r.ice' List
U
erYlfard
POWOrChSrta
RE ri ,
Ii TIORSCP®
x. ®'
o
IA r _
am
Y = CMS
elle --_ — r
isi e-M
moi
I I l
Pk
waw P. I e=
ri i
Io j e; e_'
r
0 Products not to scale.

Ao PiNNb
San,: Wet Y11
Ward

COPYRIGHT/ TRADEMARK INFORMATION
2019 by EJ. Ward, Inc. All rights reserved.

The information disclosed herein is proprietary information owned by EJ. Ward, Inc. Reproduction without permission is prohibited.

Trademarks CANceiver"', W4 CANceiver", VITT', W4 FCT'"', loT FCT"', W4 Fuel View', and the Ward logo are registered Trademarks of EJ. Ward, Inc.

EJ. Ward, Inc.
8801 Tradeway
San Antonio, Texas 78217
www.ejward.com
Ward
Telematics and Fuel Control

CONTENTS
Terms and Conditions 1
End User License 2
Product End- of-Life Policy 6
Product Warranty 7
Sole Source 9
CANceiver' Disclaimer 10
Environmental Policy 11
Labor 12
Software and Training 13
W4 Fuel Control Terminal 14
CANceiverTM
17 Reader-Card/ FOB/ Key 19
Antenna Tags 20
Hose Module 21
AP Wi- Fi 22
Pulser Relay Kits 23
JettScan 24
Miscellaneous Parts 25
TLS Interface 26
Factory Repair 27
W3 Fuel Control Terminal 28
XT 29
GPS— Passive 30
GPS— Geotab 31
EV Charging Stations 35
Tank Level Gauging —Omntec 36
Contact Ward 57
ernaticoi 7 Vara

TERMS AND CONDITIONS
Shipping
E. J. Ward, Incas( Ward) method of shipping is by standard ground with a designation" FOB Destination Freight Prepay& Add':

This method ensures Ward is liable for goods during shipment until received by the customer.

Shipping& Handling is additional and will be charged on final invoice.

A customer may request expedited shipments such as" next day" or" two day" for an additional fee.

Return Merchandise Authorization Procedure
All materials requiring return shipment to Ward for defects, normal replacement, or any other reason must be returned through the Return Merchandise Authorization( RMA) process. The request for an RMA number can be made by emailing Ward at returns@ejward. com or by calling 210.824. 7383.

Returns made outside this process may cause an account to not be credited correctly, which may result in invoicing errors and/ or delays in getting the correct materials back to our,customers.

Returns older than 30 days from the invoice date will be subject to a 20% restocking fee. Only products that are in current production will be accepted, and the customer must obtain an RMA in advanceusing Ward's RMA process.

No refunds will be given. Ward will issue an account credit that can be used toward future purchases.

Ward reserves the right to deny any returns that are outside of the product warranty period or past the 30 day invoice date.

Mileage and Other Surcharges
All distances are verified using" Google Maps" routing and calculated on a round trip basis.

Mileage charge is 75C per mile
Technician travel time costs are based on the current daily or hourly rates within this price book Service and Support Plan Pricing
Single and multi-year plans are available. Contact your local sales person or Ward office for a quote.

Plans are priced and scoped to meet individual customer business requirements. These prepackaged and custom-tailored plans include some of our most popular options such as:

On- site, labor and parts included
10% off list price for items not covered in relation to labor, software and hardware( for Platinum level or higher) On- line software training sessions
24x7 Call Center support line access
Registered Contracts
Ward offers the following contracts to purchase a fuel management or telematics solutions:

Sourcewell: 022217-EJW ( ejward.tom/ about- us/ sourcewell- awarded-contract- 022217- ejw/) GSA Schedule 70: GS- 35F-0141Y
Customers wishing to utilize these contracts for potential savings may contact Ward via email with our convenient Inquiry form: ejward.com/ forms/ general- sales- inquiry-form/ or call 210.824. 7383 for more information on this process. da oo«oa
I
fir;
rWard Telematics and Fuel Control

END USER LICENSE
THIS END USER LICENSE(" License") is between E. J. Ward, Inc.(" Licensor" or" Contractor"), a Nevada corporation with its principal place of business located at 8620 N New Braunfels Suite 200N, San Antonio, Texas, 78217, and Licensee" or " Client'; and shall be effective as of the date of initial installation or Licensee uses the Software or Hardware for its intended purpose whichever comes first. (the" Effective Date").

RECITALS
WHEREAS, Licensor owns all rights, title and interest to the Hardware, Firmware and Proprietary Software( as defined herein); and
WHEREAS, Licensor desires to convey, and Licensee desires to receive, certain limited rights in the use ofthe Hardware and Software pursuant to the terms and conditions contained in this License.

NOW THEREFORE, in consideration of the mutual promises set forth below in this License and for other good and valuable consideration, the sufficiency of which is hereby acknowledged, Licensor and Licensee agree as follows:

1. Definitions
A. " Software" means Computer Applications consisting of;but not limited to, mathematical, machine or compiled codes, executable programs, routines, embedded software, firmware, updates, modifications, revisions, other functions and documentation that control, analyze, report on the functions and operation of Licensor Products, as well as any archival copies of such computer programs and documentation permitted by this End User License.

B. " Computer Applications" means Software designed to perform a group of coordinated functions, tasks, or activities for the benefit of the user.

C. " Products" means Commercially distributed goods that are an idea, method, information, object or service created as a result of a process and serves a need or satisfies a want. It has a combination of tangible and intangible attributes, benefits, features, functions and uses that Licensor desires to convey, and Licensee desires to receive, certain limited rights in the use of pursuant to the terms and conditions contained in this License.

D. " Hardware" means a physically tangible electrical or electro- mechanical system or sub- system and associated documentation such as but not limited to Fuel Control Terminals, CANceiver OBDII Vehicle Telematic Devices, Passive GPS Antennas, Hose Modules, EM-Tags, EV Charger retrofit modules.

E. " Use" means: ( i) executing or loading the Software or Applications onto a computer, into RAM or other primary memory;( ii) engaging the Software or Applications for its intended purposes; or( iii) copying the Software and Applications for archival or emergency restart purposes.

F. " Initial Installation" as described in Section 5 ( A) and( B).

G. " Integrated Firmware" refers to any software or programmable code that is embedded or integrated in the Hardware and enables the functionality of the Hardware. aeo.00m.
fir;
Ward
Telematics and Fuel Control

2. Grant of License
Licensor grants to Licensee a revocable, non-exclusive, non-transferable, limited right to install and use the Software.

Licensee may make one( 1) archival copy of the Software Application per licensed instance in non- printed, machine readable form, in whole or in part, provided that such copy is for Licensee's own use only for archival, emergency restart or staging environment. Licensee will make no other copies of the Software except as authorized herein. All rights, title and interest to the Software will remain vested in Licensor, and nothing in this License will give or convey any right, title or interest therein to Licensee except as a licensee under the terms of this License.

3. Limitations on Use
A. Licensee agrees that it will use the Software only in its own business, and not directly or indirectly for the use or benefit of anyone other than Licensee, and only pursuant to the scope of the grant of the License set forth herein.

B. Licensee agrees that it shall not, directly or indirectly:
i.) use( including make any copies of) the Software beyond the scope of this License; ii.) permit any other Person ( other than its own users) to use the Software; Hi.) modify,translate, adapt or otherwise create derivative works or improvements, whether or not patentable, of the Software or any part thereof;
iv.) reverse engineer, disassemble, decompile, decode or otherwise attempt to derive or gain access to the source code of the Software or any part thereof; v.) remove, delete, alter or obscure any trademarks or any copyright, trademark, patent or other intellectual property rights notices from the Software, including any copy thereof; a. except as contemplated by this License, copy the Software, in whole or in part; b. use the Software or Documentation in the operation of a service bureau

4. Limitations on Transfer
This License may not be conveyed in any way without the prior written consent of Licensor,which Licensor's consent may be withheld for any reason. Notwithstanding the preceding sentence, Licensee shall be permitted, upon notice to Licensor, to assign this License in connection with any merger, consolidation, sale of stock, or re- organization of substantially all of the business or assets or equity securities, or otherwise ofLicensee. Any purported sale, assignment, transfer, conveyance, license or sublicense without such consent will be null and void ab initio, and will automatically terminate this License.

5. Installation
Licensor hereby permits Licensee to install the following onto the appropriate environment, which Licensee shall perform at any time after the Effective Date:

A. A single software installation for the production environment B. As applicable Licensee hereby permits Licensor to install the following with the assistance of Licensor after the Effective Date:
i.) One( 1) additional licensed instance for use in:
a. Staging or pre- production testing environment
Sections 5( A) and( B) shall be collectively hereafter be referred to as the" Initial Installation':

6. Term and Termination
A. 'The License commences as of the Initial Installation or Licensee uses the Software for its intended purpose whichever comes first, and will remain in force until either party terminates this License End User License
tOON%
rWard Telematics and Fuel Control
pursuant to the terms herein. Upon proper termination of this License, Licensee will: (i) return all copies ofthe Software to Licensor without demand or notice; or( ii) permanently delete or destroy all copies of the Software in its possession and submit to Licensor a sworn affidavit signed by Licensee attesting to such destruction.

B. Except as set forth in the provisions of this License that provide for automatic termination in the event of breach of confidentiality or unauthorized use or transfer, if Licensee breaches any other provision of this License, Licensor may terminate this License, provided, however, that Licensor has given Licensee at least fourteen( 14) business days written notice of and the opportunity to cure the breach. Termination for breach shall not alter or affect Licensor's right to exercise any otherremedies for breach.

7. Confidentiality
Except where required by applicable law and applicable federal and local public records laws, Licensee agrees to observe complete confidentiality with respect to the Software, Hardware defined herein and will not copy,reproduce, publicize or otherwise disseminate it to third parties. Licensee shall not make Software and Hardware available in any form to any person other than its employees, or whose job performance requires access and who are under obligations of confidentiality. Licensee shall take appropriate action to protect the confidentiality oflicensed products and ensure that any person permitted access does not disclose or use them except as permitted by this agreement. Licensee shall give immediate written notice of any unauthorized disclosure or use of the licensed products as soon as Licensee learns or becomes aware of such unauthorized disclosure or use. Any breach of confidentiality by Licensee will automatically terminate this License. Licensee agrees that Licensor's remedies at law for breach ofconfidentiality are inadequate and that Licensor will be entitled to equitable relief, including without limitation, injunctive relief, specific performance and/ or other remedies to the extent permissible by law.

8. Licensee's Obligation to Notify of Infringement
Licensee will immediately notify Licensor of any infringement or attempted infringement of Licensor's rights in the Software or Hardware of which it becomes aware. Licensee will affirmatively cooperate with Licensor in any legal or equitable action that Licensor may undertake to protect any of its rights in connection with the Software or Hardware defined in this License.

9. Warranty of Title
Licensor warrants that it is the lawful owner ofthe Software and Hardware and that it has the complete authority to grant the License specified herein.

10. Software Warranty and Disclaimer
Licensor warrants that the Software has been developed in a workman like manner, and in conformity with generally prevailing industry standards. Licensee must report any material deficiencies in the Software to Licensor in writing within thirty( 30) days of initial installation of the Software. Licensee's exclusive remedy for the breach of the above warranties will be the correction of the material deficiency within a commercially reasonable time. THIS WARRANTY

IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING

ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY ORAL

OR WRITTEN REPRESENTATIONS, PROPOSALS OR STATEMENTS MADE ON OR PRIOR TO THE EFFECTIVE DATE OF THIS AGREEMENT. LICENSOR EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES.

11. Limitation of Liability, Indemnification

EXCEPT AS OTHERWISE PROVIDED BY ANY PORTION OF THE AGREEMENT NEITHER PARTY WILL

BE LIABLE TO THE OTHER FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCURRED OR

SUFFERED BY THE OTHER ARISING AS A RESULT OF OR RELATED TO THE USE OF THE SOFTWARE OR

HARDWARE, WHETHER IN CONTRACT, TORT OR OTHERWISE, EVEN IF THE OTHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.

12. Maintenance
No additional software maintenance is included under the terms ofthis License. However, Licensor is responsible for End User License
a;, widPo
Nee”
Ward
Telematics and Fuel Control
any patches or repairs to the current version of the Software during the initial one ( 1) year Warranty commencing on the initial installation date. Licensor's obligations with respect to maintenance and support after initial warranty period, including updates or upgrades, if any, will be set forth in a separate written agreement between the parties.

13. Relation of Parties
Nothing in this License will create or imply an agency relationship between Licensor and Licensee, nor will this License be deemed to constitute a joint venture or partnership between the parties.

14. Severability
If any term of this License is found to be unenforceable or contrary to law, it will be modified to the least extent necessary to make it enforceable, and the remaining portions of this License will remain in full force and effect.

15. Force Majeure
Neither party will be held responsible for any delay or failure in performance of any part of this License to the extent that such delay is caused by events or circumstances beyond the delayed party's reasonable control.

16. No Waiver
The waiver by any party ofany breach of covenant will not be construed to be a waiver of any succeeding breach or any other covenant. All waivers must be in writing, and signed by the party waiving its rights. This License may be modified only by a written instrument executed by authorized representatives of the parties hereto.

17. Venue
This License shall be governed by and construed in accordance with the internal laws of the State of Texas without giving effect to any choice or conflict of law provision or rule( whether of the State of Texas or any other jurisdiction) that would cause the application oflaws of any jurisdiction other than those of the State of Texas. Any legal suit, action or proceeding arising out of or related to this Agreement or the matters contemplated hereunder shall be instituted exclusively in the courts within the State of Texas, county of Bexar county, Texas, and each party irrevocably submits to the exclusive jurisdiction of such courts in any such suit, action or proceeding and waives any objection based on improper venue or forum non conveniens.

If any term or provision of this License is invalid, illegal or unenforceable in any jurisdiction, such invalidity, illegality or unenforceability shall not affect any other term or provision of this Agreement or invalidate or render unenforceable such term or provision in any other jurisdiction.

18. Notice
All notices and correspondence to the parties must be delivered by hand, emailed, sent by registered or certified mail RRR), or by Federal Express, Express Mail or other reliable overnight mail service that provides a receipt to the sender.

Receipt of a notice by the party to whom the notice is transmitted will be considered to have occurred upon receipt, if hand- delivered or emailed; five( 5) business days from the date of mailing, if mailed; or the next business day after transmittal by Federal Express, Express Mail or other reliable overnight delivery service that provides a receipt to the sender. All notices and correspondences shall be delivered to the respective addresses below, or to any other address as a party may notify the other party in writing from time to time:

If to E. J. Ward, Inc.:

Robert E. Kettyle
Executive Vice President
E. J. Ward, Inc.
8620 N New Braunfels Suite 200N
San Antonio, Texas 78217
[email protected]
End User License
oDO, Po ,
s
a
4Et—'
Ward
Telematics and Fuel Control

PRODUCT END- OF- LIFE POLICY
An E. J. Ward, Inc.,product may reach the end of its Product Life Cycle due to market demands, technology innovation and development driving changes in the product; or a product may simply mature over time and is replaced by functionally richer technology.While this is an established part of the overall product life cycle, Ward recognizes that End- of-Life milestones often prompt companies to review the way in which such end-of-sale and end-of-life milestones impact their businesses. With that in mind, we have set up a Ward End- of-Life policy to help customers better manage their end-of-life transition and to understand the role that Ward can play in helping migrate to alternative products within Ward's Fuel Management and telematics platforms.

The End- of-Life Policy only applies to End- of-Life and End- of-Sale announcements made on or after January 1, 2015 for all Ward product lines. The policy does not apply to product that is already subject to previous End- of-Life and/ or End-of-Sale announcements.

General Policy Guidelines

1. As a general rule, Ward will provide six month's notice of the affected product's end-of-sale date and/ or the last day when the affected product can be ordered. This notice will appear on the Ward website at ejward.com/ product-end- of-life-list/ and we encourage you to visit this site regularly as it contains useful information regarding Ward's products.

2. Spare or replacement parts for hardware will be available for a period oftwo years from the end-of-sale date or until Ward cannot reasonably procure, manufacture for sale or support customers on its support contracts because of conditions not in its direct control. If applicable we will provide spares and replacement parts in accordance with our Return Materials Authorization( RMA) process( see Terms and Conditions).

3. Software support will be as follows:
a. For the first year, following the end- of-sale date, we will provide bug fixes, maintenance releases, workarounds, or patches for critical bugs reported via the Ward Call Center or via e- mail at [email protected].
b. After the first year, Ward will provide software bug fixes, maintenance releases, workarounds or patches only for customers with a Service and Support Agreement.

NOTE: It may be necessary to upgrade certain software to its current release to correct a reported problem( e.g. Sequel 2004 to 2016). Software updates are customer's expense.

4. Service and Support Agreements
a. Service and Support Agreements that have lapsed and have not been renewed within three months 90 days) of end- of-sale date are not renewable.

Explanation ofTerms in this Notice
End-of-Life Cycle A process that guides the final business operations associated with the product life cycle.

The end-of-life process consists of a series of technical and business milestones and activities that, once completed, make a product obsolete. Once obsolete, the product is not sold, manufactured, improved, repaired, maintained, or supported.

End-of-Sale Date The last date to order the product through Ward. The product is no longer for sale.

Hardware The physical product and its components.

Software The software that runs the Fuel Management or Telematics solution.

DISCLAIMER: While we strive to provide a reasonable end-of-sale date, there may be times that this is not possible due to lack of prior notice from third party suppliers. ova;
Ward
Telematics and Fuel Control

PRODUCT WARRANTY
The terms and conditions listed below supersede all other terms, unless otherwise agreed to by E. J. Ward, Inc.( Ward), in writing.

Warranty Start Date
The Warranty start date, as indicated in this policy, is subject to one of the following:

The date a product is shipped from Ward.

A date mutually agreed to in writing.

The terms defined in a customer's contract.

Limited Hardware Warranty
Ward provides a one year limited product hardware warranty to purchasers of its products. Ward warrants that the products will be free from defects in materials and workmanship that result in a material deviation from the applicable published Ward technical specifications.

Hardware Failure- Upon a hardware failure, Ward will repair or replace such products within three working days of its receipt of the failed hardware, if in advance ofits receipt, such hardware was evaluated by a Ward Technician, or Ward Technical Support person via telephone.

Customer will receive an RMA number from Ward. The RMA number must be clearly indicated on the shipping box and paperwork( see Terms and Conditions, RMA section).

Hardware Repair Service
In the event of a hardware failure past the first 30 days, but within the first year of ownership from the Warranty start date, the unit will be either repaired, or at Ward's option, replaced with a new or reconditioned unit of equal or greater value.

Customer will receive an RMA number from Ward. The RMA number must be clearly indicated on the shipping box and paperwork
A repaired or replacement unit will be shipped at Ward's expense within five business days after receipt of the failed unit.

Limited Software Warranty
Ward provides a one year limited software warranty to licensees of Ward software accompanying Ward hardware.

Ward warrants that the software delivered will be free of defects in material and workmanship for a period of one year following delivery to licensee. Ward warrants that the software, when used in accordance with the terms of the Ward Software License, will operate substantially as set forth in the applicable Ward software documentation for a period of one year following delivery of the software to licensee. r--- Ward
Telematics and Fuel Control
Software Updates
During the warranty period, updates for software are available by contacting Ward. System software updates include applicable minor releases( e.g. Release 4.0 to 4. 1) to the customer's specific family ofproducts as well as repairs, patches and feature releases within that family ofsoftware. Customer must grant Ward server access and have access to the Internet for FTP downloads as directed by a Ward Technical Support team member. Software updates released after the initial one year warranty period not deployed as a repair, patch, or global enhancement within the same family of software are available as an upgraded product for the price available in the then current published price book.

Technical Support Access
During the warranty period, toll free support is offered 7 days per week, 24 hours per day at:

1. 800. 580.WARD( 9273)
[email protected]
NOTE: Access to Technical Support after the warranty period is on a commercially reasonable basis with rates available upon request; unless a Service and Support Agreement has been purchased.

Limitation and Disclaimer ofWarranties
Buyer" acknowledges and agrees that the products, including all software components thereof, purchased or supplied under this agreement from Ward are" Goods" within the meaning of Article 2 of the Uniform Commercial Code. EXCEPT AS SET FORTH HEREIN, WARD MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AS TO THE PRODUCTS SOLD OR PROVIDED UNDER THE TERMS OF THIS AGREEMENT TO" BUYER, AND

EXPRESSLY DISCLAIMS THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Limitation of Liability; Once products sold or provided under this agreement by Ward are delivered to" Buyer", Buyer" shall be solely responsible for the use of such products, including any and all results caused by the use or misuse of the products, and including using such products in compliance with all applicable local, state, federal, and international laws. In no event shall Ward or its directors, officers, employees, agents, or affiliates, be liable to the Buyer" or to any third party for
i) any lost profits, any data loss, any loss of business, or any indirect, consequential, exemplary, incidental or special losses or damages of any kind or nature whatsoever in connection with or arising out of the use or sale ofproducts to Buyer" by Ward; or( ii), any losses or damages of any kind or whatsoever, including personal injury or death, arising out of" Buyer's" or a third party's installation, misuse, use, whether such use is proper or improper, or modifications of the products sold to" Buyer" by Ward, not even in the case where Ward has been advised of the possibility of such loss or damage. The sole and exclusive remedy of" Buyer" or any third party for any claim, loss, or damage not excluded under clauses( i) or( ii) of the preceding sentence and that in any way relates to, or arises out of,the products sold to" Buyer" by Ward shall be limited to repair or replacement ofsuch products sold or provided under the terms of this agreement to" Buyer" by Ward during the initial first calendar year placed into service.

Indemnification

EXCEPT AS OTHERWISE PROVIDED BY ANY PORTION OF THE AGREEMENT NEITHER PARTY WILL

BE LIABLE TO THE OTHER FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCURRED OR SUFFERED BY THE OTHER ARISING AS A RESULT OF OR RELATED TO THE USE OF THE HARDWARE or

SOFTWARE, WHETHER IN CONTRACT, TORT OR OTHERWISE, EVEN IF THE OTHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES.

Product Warranty Po
reWard
Telematics and Fuel Control

SOLE SOURCE
January 1, 2019
Dear Customer,
As the original equipment manufacturer( OEM) of the Ward Fuel View Automated Fuel Management System'"( AFMS), and the Ward Fleet View GPS Asset Tracking System'( ATS), E. J. Ward, Inc., owns the intellectual property and distribution rights to its AFMS, Telematics GPS/ AVL solutions, along with the related Fuel View and Fleet View software programs, communication systems and documentation.

Ward is the sole supplier and support agent for its products, systems and solutions, either direct or through authorized agents. All design, manufacturing, assembly, and quality control checks are performed by Ward for all of its hardware and software products.

At this time, Ward has not certified any other fuel management company's technology, vehicle installed devices, OBDII or otherwise, or GPS other than those offered directly by Ward or its authorized agents, to be installed in conjunction with or plugged into the vehicle's engine control module( ECM) port( e.g. OBDII etc.) in series or parallel with the Ward CANceiver'. Only Ward supplied devices are certified to operate simultaneously with the Ward AFMS and CANceiver while plugged into the vehicle's ECM/ OBDII port. Installing non-certified devices may affect operation of the AFMS and or the CANceiver, and have a potentially negative affect on a vehicle's functionality.

If you have any questions, please do not hesitate to give me a call.

Regards,
Robert E. Kettyle
Executive Vice President
[email protected]
Office 210.824.7383
Cell 713.806.3711
o°en"" Oa
I
17;
ward 2019
Labor Product MSRP
Part Number Description Units MSRP
CAINSTALL FCT Mechanical and Electrical Installation*# Each CAINSTALL-TT Fuel Truck Installation* t Each
CASTART-FCT Ward Tech. Startup& Testing w/ FCT Use; Train On- Site*" Per Day 1, 800.00 CONTRACT-MAINT-CALLCEN Maintenance Contract- Call Center Support# Each CONTRACT-MAINT-SERV/ CALL Maintenance Contract w/ On- Site Repair, Parts and Call Center Support t Each CVR- INSTALL-NPTO CANceiver Install- without PTO*" Each 225.00 CVR- INSTALL-PTO CANceiver Install- with PTO*" Each 325.00 CVR-TRAIN CANceiver Installation Training( with or without CANceiver)" In* Per Day 1, 800.00 LABORCONSULT Consultant Per Hour 250.00
LABORDATABASEANA Database Analyst Per Hour 225.00
LABORDATABASEARCHI Database Architect Per Hour 250.00
LABORDIRVP DirectorNP Per Hour 350.00
LABORFIELDTECH Field Technician( 4- hour minimum)**/*** Per Hour 225.00 LABORHARDENG Hardware Engineer Per Hour 250.00
LABORHARDMGR Hardware Manager Per Hour 250.00
LABORPGMMGR Program Manager Per Hour 225.00
LABORPM Project Manager Per Hour 200.00
LABORQCENG Quality Engineer Per Hour 235.00
LABORSOFTIMP Software Implementation Per Hour 225.00
LABORSOFTMGR Software Manager Per Hour 250.00
LABORSOFTPGM Software Programmer Per Hour 235.00
LABORTRAIN Trainer Per Hour 180.00
LABORWEBPGM Web Programmer Per Hour 5225.00
TECH- SUPPORT-REP Call CenterTech Support Representative( AFMS/ GPS) t Per Hour 225.00 t Contact factory for pricing.

Pull and Replace FCT by Ward Technicians
For use of existing mechanical and electrical wiring, piping and other related connections they must meet existing local, state, and national codes; or if a licensed electrician and permits are required additional charges will apply.

Customer is responsible for Network and CATS wiring to FCT unless noted in quote.

After hours and overtime Labor are billed at time and a half of the normal hourly rate. Holiday Labor hours are billed at double time for the hourly rate.

Mileage and travel time are additional.
t One hour minimum, billed at one hour increments.
12 I Labor January 2019.. r
pp Poi,
4m ars
t-ward 2019
Software and Training Product MSRP
Part Number Description Units MSRP
CASOFT- W4 IOT SQL Fuel View 4 SQL Version Each 50,000.00 CASOFT- W4- 10T ORA Fuel View 4 Oracle Version Each 55,000.00 CASOFT- W4 IOT-SaaS Fuel View 4 Software as a Service- Cloud Hosted- SaaS* Each CASOFT-CHANGE OS/ Fuel Script Changes* Each
CASOFTECH Software Implementation* Each
CASOFT-FS- CHANGE Fuel Script Change(s)* Each
CASOFT-INTERFACE Custom Interfaces* Each
CASOFTRAIN- ON User and Admin Training- Online Per Day 1, 200.00 CASOFTRAIN- SITE User and Admin Training- On- Site••• Per Day 1, 800.00 CASOFT-REPORT Custom Reports* Each
CASTARTUP- ASSIST Additional Technical Phone Support t Per Hour 225. 00 CVR-TRAIN CANceiver Installation Training( with or without CANceiver) Per Day 1, 800.00 EJW-TRAIN- OFFSITE Training Class*" Each 11, 500.00
EJW-TRAIN- SA Training Class Each 10000.00
SERVER- COM Communication Server# Each
SERVER- DB Database Server# Each
SERVER- RACK Server Rack- UPS- Network Router* Each
SERVER-WEB Web Server* Each
Contact factory for pricing.

Mileage and travel time are additional.
t Two hour minimum billed at one hour increments thereafter. 13 I Software and Training January 201•?^°^ 60 .
de—
ward 2019
W4 Fuel Control Terminal Product MSRP
Part Number Description Units . MSRP
FCT-W4- 05H 5- hose Terminal Each 10, 190.22
FCT-W4- 10H 10-hose Terminal Each 10,869.57
FCT-W410T- 05H 5- hose 107 Terminal Each 10,190.22
FCT-W4 IOT- 10H 10-hose IOTTerminal Each 10,869.57
FCT-W4 IOT-DISPMNT Dispenser Mount FCT Each 9,782.61
FCT-W4 10T-RETAIL Retail Terminal# Each
FCT-W4-TRUCKTER Truck Terminal WIFI Each 10,869.57
FCT-W4- WALL 12' or 24' S- hose Terminal Each 9,782.61
FCT-W4 IOT-TRUCKTER Truck Terminal Cellular Each 10,869.57 FCT-W410T-WALL 5- hose Terminal Each 9,782.61
ACS- PLT-BLANK Accessory Plate for Front Door Each 74.73 ACS- PLT- CARD Accessory Plate for Front Door Each 74.73 ACS- PLT-CARD- 2 Accessory Plate for Mag/ Swipe Each 74.73 ACS- PLT-SMARTRE Accessory Plate for Front Door Each 74.73 ANT-0894- 17-INC PAP Antenna forTruck Terminal( single) Each 237. 77 ANT-0940- 1X- E17 Moxa Antenna Truck Terminal( male/ female) Each 237. 77 ANT-0940- 2X-A2 FCTI/ VIT Dual Antenna( male) Each 237.77 ANT-0940- 2X- E17 FCTI/ VIT Dual Antenna for Truck Terminal( male) Each 237.77 ANT-0940-WH- 2X MOXA Island Dual Antenna a2a2 Each 237.77 ANTBASE- GASKET 1/ 4' D/ C60-Duro Neoprene Each 6. 79
BATT-24V- 1. 3AH Mini Battery, 24v Each 271. 74
BATT-24V- 1. 3WM Mini Battery 24V for UPS Each 271. 74
BATT-PS- 1228 Rechargeable Battery 12V 2.8A( for W4 Truck FCT) Each 101. 90 BATT-W4- SBC Replacement battery 3v lithium Each 27.98
CBL-AUDIO- 1 OPIN Audio I/ O Cable 10-pin Ribbon Each 27. 17 CBL-AUDIO- 10PNXT Audio I/ O Cable 10-pin Ribbon Each 40.76 CBL-CATS- 1 1' Cat 5 Ethernet Cable- black Each 13.59
CBL-CAT5- 1 BLUE 1' Cats Cable- blue Each 13.59
CBL-CAT5- 3 3' Cat 5 Ethernet Cable- black Each 20.38
CBL-CAT5- 3FTBLU 3' Cat S Ethernet Cable- blue Each
i

20.38 CBL-CAT5- 6FT 7' Cat 6 Ethernet Cable- blue
i
Each 24.46
CBL- CAT5- 6FTBRT 6' Cat 5 Right Angle- blue Each 31. 25 CBL- CAT5- RT1 1' Cat 5 Right Angle- black Each 20.92
CBL- COM2- 14PIN Com2 14-pin Ribbon Cables Each 27. 17
CBL- COM2- 14PNXT Com2 14-pin Ribbon Cables Each 40.76
CBL- COM3/ 4-20P Com3/ 4 20-pin Ribbon Cable Each 27. 17 CBL- CPU- FPIB- W4 Back-light Cable Carrier Board Each 27. 17 CBL- CPU- MPB- NXT Back- light Cable MPB to CPU Each 27. 17 Contact factory for pricing.
14 I W4 FCT
January 201 `°° ii.i' Oo .

Lye. k
ci,01
award 2019
W4 Fuel Control Terminal Product MSRP
Part Number Description Units MSRP
CBL-CPU- MPB- W4 Back-light Cable MPB to CPU Each 27. 17 CBL-CPU- PWR-W4 Power Cable, CPU/ Carrier Each 27. 17
CBL-INTRU- NXT Intrusion Switch& CBL Assembly Each 40.76 CBL-INTRU- W4 Intrusion Switch and Cable Assembly Each 40.76 CBL-LANTRONIX 1 RS- 232 DB9F- DB25M- 1' Cable Each 16.30 CBL-LVDS LVDS Video Cable Each 40.76
CBL-LVDS- NXT LVDSB Video CBL Each 170. 11 .

CBL-MPB- CARRIER Main Board to Carrier Board Cable Each 27. 17 CBL-MPB- CARRIER- NXT Main Board to Carrier Board Cable Each 40.76 CBL-SERIAL/ OPTO R5232 Serial Printer Cable Each 16.30
CBL-USB- MPB/ KP CBL interface between MPB& Keypad interface board( WM) Each 16.30 CON-TRAILPLUG Trailer Plugs Each 10.87
DISPLAY- FAN 24 vdc Blower Each 40.76
DISPLAY-W4-RT 7' Display Each 319.29
DSP- LEXAN- W4 Front Door Window. 375' Lexan Each 20.38 EN- ANTADPLTFCT RT Antenna Hole Plug Each 20.38
EN-TOMBSTONE- 24 24' Tombstone Stainless Steel w/Bead Blast Each 1, 630.43 EN-TOMBSTONE- W4 Tombstone Stainless Steel w/ Bead Blast Each 2,038.04 EN- TRK-TERM- W4 12" RT Wall Mount/ Truck Terminal Each 1, 494.57 FAN- MNT-BOARD Fan Mounting Board Each 33.97
FP- RT-W4 Front Panel Stainless Steel Keypad Each 407.61 FP-W4- QWERTY Front Panel Keyboard QWERTY style Each 407.61 HW- BKT-TRUCKT Truck Terminal Battery Bracket Each 16.30 HW-DOORHINGE Door Hinge for Terminal Each 10.20
HW-LOCK- R24107 FCT Lock& Key Each 27. 17
HW-TRACK-08 8' Din Rail Each 6.79
HW-TRACK- 12 12" Din Rail Each 6.79
KIT-FCT-HEAT W4 FCT Heater kit/ Cold Weather Package Each 581. 52 KIT-FCT-W4- PED Complete Pedestal Assembly Each 951. 09 KIT-W4- 5HOSE- UPG S- hose Upgrade Includes 5- hose board Each 2,418.48 LEXAN- CBL-COVER Lexan Cable Cover for Light Bar Each 13.59 LEXAN- LIGHTBAR Lexan Light Bar Cover Each 20.38
PCB- DATAKEYINT W3 Data Key Interface Board Each 203. 80 PCB- PAP Portable Access Point w, Vi- Fi for Truck Terminal Each 883. 15 PCB- PWR- DC- W4TT Truck Term DC- DC Power w/ Charge Each 883. 15 PC- CARRIER-W4 CPU LCD Panel Carrier Board Each 679.35
PC- KEYP- INTF FP-W4- QWERTY keypad interface Each 195. 60 PWR- UPS- 137005 DC UPS 24V Each 543.48
PWR- UPS- 2866611 Power Supply and UPS, 24V Each 815.22 15 I W4 FCT January 20 =: oo+do ..
try-•w 3`
Ward 2019
W4 Fuel Control Terminal Product MSRP
Part Number, Description • - Units MSRP
RT- FPI- W4 Front Panel Interface Board Each 781. 25
RT- MPB- W4 RT Main Board w/2GBEach 2,038.04
RT- MPB-W4NXT W4 RT Main Processor BD- Windows IOT Each 2,038.04 RT-W4-5HOSE-BRD RT 5- hose Dispenser Interface Board Each 1, 413. 04 RT-W4- 5HOSE- CL W4 5- hose Dispenser Serial Interface Each 1, 413. 04 SHOCK- MOUNT 5/ 32 Cable ISOL for TruckTerminal Each 237.77 W4- FCTINIT-2. 4 Fuel Control Board/ IT Interface Each 781. 25 W4- FLASH- 8GB Compact Flash 8GB Industrial Grade Temperatu re Each 237.77 W4- FP-ASSEMBLY Full Front Panel w/Boards Each 3,396.74 W4- FP- STACK STACK- Main Board, Carrier Board and Display Each 1, 426.63 W4-PWR- SUPPLY Power Supply Pro ECO 120 W 24V 5 Each 271. 74 W4-SPEAKER Electro Speaker& Transducer Each 13. 59
16 I W4 FCT January 20194a°°"°°e:
icm 1644' h v
8+m 0,'
ward 2019
CANceiverProduct MSRP
Part Number Description Units MSRP
CVR-W4-WIFI CANceiver w/WiFi Each 250.00
KIT-CVR-W4-WIFI CANceiver w/Wi-Fi Kit- LD Each 285.00
KIT-CVR- W4-WIFI CANceiver w/Wi-Fi Kit- non-OBD Each 325.00 KIT- CVR- W4-WIFI CANceiver w/Wi-Fi Kit- HD( Standard& OBD II/ III) Each 305. 38 KIT- CVR- W4-WIFI CANceiver w/Wi-Fi Kit- International( Standard& OBD II/ III) Each 352. 93 ANT-0940-WH- 1X 2.4 GHZ Omni NYCWIN ant Each 218.75
CBL-CVRW4- 10 W41O Cable for CVR- Enhanced Each 31. 25
CBL-CVR-XTS CANceiverEnhanced Con Cbl Each 31. 25
CBL-J1708- 16P- D HvyDty 1170816PinDua I CAN Cbl Each 75. 00 CBL-J1708- 16-W4 HvyDty 11708/ 1939 16 pin W4 CV Each 75. 00 CBL-J1708-6P- D HvyDty(J1708) 6PinDua CAN Cbl Each 75.00 CBL-J1708-6P-W4 6 pin 1708/ 1939 Heavy Duty CBL Each 75.00 CBL-J1939-9P- D 11708/ 119399Pin Dual CAN Cb) Each 75.00 CBL-J1939-9P- D2 ' OBD 11 9-P Standard Heavy Duty Each 75.00 CBL-J1939-9P- IN Cable J1939- 9P International Each 125.00 CBL-11939-9PIN2 OBD II J1939- 9P INT CBL Each 125.00
CBL-11939-9PIN3 OBD II 1939 INT CBL 2018 Each 125.00
CBL-J1939- 9P-W4 Heavy Duty CAN CBL( 1939/ 1708) Each 75.00 CBL-J1939-9PW42 OBD II Heavy Duty CAN CBL( 193 Each 75.00 CBL-11939-CAT J1939 to Caterpiller Adapter _ Each 62.50 CBL-J1939-W4- IN 9 pin heavy duty obd cable for Each 125.00 CBL-J1939-W4IN2 OBDII 9 Pin Heavy Duty CBL INT Each 125.00 CBL-J1939-W41N3 OBDII HD CBL INT 2018 Each 125.00
CBL-11962- D Lt Duty( 11962) Dual CAN Cable Each 75.00
CBL-J1962-W3VM Lt Duty( 11962) Dual CVR CBL V Each 62.50 CBL-J1 962-W4- D Light Duty Cable for W4 CVR Each 62.50 CBL-J1962-W4- MV 11962 LD CBL Volvo Mack Each 75.00
CBL- SDL-OBDII Z059- 2 SDL w/ 12V Pwr Output Each 150.00 CVR-11708 CANceiver J 1708 Heavy Duty Veh Each 326.09
CVR-11939 CANceiver J1939 Off/HvyDutyVeh Each 326.09
CVR-J1939-2 CVR J193911/ 12284 LDH Promgram Each 326.09 CVR-J2284LDH J2284LDH- Light Duty/ Hybrid CAN Each 326.09 CVR- J2284LDH- II 12284 LD CANCeiver Each 326.09
HW-BKTFORD-OBD OBD Connector Adapter for Ford Each 6.25 HW-BKT-OBDCBL OBD Connector Adapter Each 6.25
HW-TIE-NT-11" 11" Black Nylon Tie Wraps Each 2.50
HW-TIE-NT-8UV 8" U.VTe Wraps PLT2M- M0 Each 1. 25
KIT-CVR-J1708- 16 J1708 CVR Kit w/ 16PinCbl Each 339.60 17 I CANceiver January20 • a`"
rpc"4i
Ward 2019 CANceiverTM
Product MSRP
Part Number Description Units MSRP
KIT-CVR-11708-6 J1708 CVR Kit w/6 PinCbl Each 339.60
KIT-CVR-J1708- 9 J1708 CVR Kit w/ 9 PinCbl Each 339.60
Kfi-CVR-J1708- 92 11708 CVR Kit w/ 9 PinCbl Each 339.60 KIT-CVR-J1708- I J1708 CVR Kit w/ International Each 386.88 KF[- CVR-11708- 12 J1708 CVR Kit w/ International Each 386.88 KIT-CVR-11708- 13 J1708 CVR Kit w/ International Each 386.88 KIT-CVR-11939- 2 11850G CVR Kit Each 339.60
KIT-CVR-11939- 6 J1939 CVR Kit w/6-pin cable Each 339.60 KIT-CVR-J1939- 9 J1939 CVR Kit w/9-pin Cable Each 339.60 KIT-CVR-11939- 92 J1939 CVR Kit w/9- pin Cable Each 339.60 KIT-CVR- J1939- 1 119391 CVR Kit with International Cable 2007- 2015 Each 386.88 KIT-CVR- J1939- 12 119391 CVR Kit with International Cable 2016/ 2017 Each 386.88 KIT-CVR-J1939- 13 119391 CVR Kit with International Cable 2018& above Each 386.88 KIT-CVRJ2284LDH J2284LDH CVR Kit Each 356.25
KIT-CVRJ2284LDH- 11 J2284LDH CVR Kit Each 356.25
KIT-VIT-CBL-ASY VIT Cable Assy w/ 6' Cable& H Each 33.97 KIT-VIT-SX- ER VIT-SX- ER Kit Each 244.57
VIT-SX-ER Extended Range VIT-SX Each 190.49
KIT-10X- FUEL- GO 1OX based GO to FCT Interface S Each
Contact factory for pricing.
18 I CANceiver January 201' otn". pOp
ward 2019
Reader-Card/ FOB/ Key Product MSRP
Part Number Description Units MSRP
CARD-CLEANER Card reader cleaner cards Each 6.79
CARD- EJWBLUE Blue EJ Ward Fuel Card Each 2.72
CARD- EJWWHITE White FJ Ward Fuel Card Each 2. 72
CARD- GREEN Blank Green Mag Stripe Card Each 2. 72
CARD- PAPERHOLD Paper Card Holder Each 1. 09
CARD- PLASHOLD Plastic Card Holder Each 4.08
CARD- PRINT-RIB SD260 Black Ribbon Kit 1500 ire Each 81. 52 CARD- PROGRAM Encoding Fee Each 8. 15
CARD- RED Blank Red Mag Stripe Card Each 2.72
CARD- SMART-1430 FlexSmart Mifare card 1430NGGN Each 9.51 CARD- WHITE Blank White Mag Stripe Card Each 2. 72
CARD- YELLOW Blank Yellow Mag Stripe Card Each 2. 72
CDR- INSERT Track 2 Insert card reader Each 475.54
CDR- MAGREADER Track 2 swipe card reader- Ti Each 475.54 CDR- MIFARE- 8030 Mifare Reader 8030 HID SMART Each 475.54 CDR-SMART-5821 Multiclass reader 91OPWNNEKE05 Each 475.54 CDR- SMART-GE GE Model T-SOOW black w/ pigtai Each 475.54 DATAKEY- BLACK Black Fuel Key Datakey611- 004 Each 10.87 DATAKEY- BLUE Blue Fuel Key Datakey 611- 0049* Each
DATAKEY-GRAY Gray Fuel Key 611- 0049-008A* Each
DATAKEY-GREEN Green Fuel Key* Each
DATAKEY-RED Red Fuel Key* Each
DATAKEY-YELLOW Yellow Fuel Key 611- 0049-004A* Each
FOB- PROGRAM Encoding Fee Per Hour Hour 225.00
KEY- ENCODE- 5321 Mifare 1434 Key Fob Encoder Each 679.35 KEY- FOB- 1434 Mifare Key Fob-Unprogram 1434 Each 11. 89 KEY- READER-01 Keyceptacle 606-0052-015A Each 245. 11
KIT-CARD- PRINT Printer/ Encoder for Mag Cards Each 4,836.96 KIT-KEY- ENCODER Key Encoder- 01 Kit Each 1, 005.43
Contact factory for pricing.
19 I Reader Card FOB Key January 2019-- w
vi)
ward 2019
Antenna Tags Product MSRP
Part Number DescriptionUnits MSRP
KIT-TAG-W4- EXT EM-Tag Kit- External Antenna Each 81. 52 KIT-TAG-W4- INT EM-Tag Kit- Internal Antenna Each 61. 14 ANT-200 2" VehEq Antenna w/ 20' cable Each 24.46
ANT-200- 30 2" Vehicle Antenna w/ 30' Cabl Each 33.97
ANT-300 3" VehEq Antenna w/ 20' cable Each 24.46
ANi400 4.25" VehEq Antenna w/ 20'cable Each 24.46
ANT-500 5.5" VehEq Antenna w/ 20'cable Each 33. 97
ANT-FLAT-225 Flat 2. 25" VehEq Antenna Each 24.46
ANT-TAG- 200 Ant 2" Tag Antenna w/ con Each 24.46
ANT-TAG- 225FLAT Flat 2.25 Tag antenna w/ con Each 24.46 ANT-TAG- 300 3" Tag Antenna w/ con Each 24.46
ANT-TAG-400 4" Tag Antenna w/ con Each 27. 17
ANT-TAG- 500 5. 5" Tag Antenna w/ con Each 27. 17
HW-ALCOHOL PADS Alcohol Prep Pads Each 1. 36
HW-TAG- BKT Tag mounting bracket Each 13. 59
HW-TAPE-4941- 1 1" x2" Wide Double StickTape- Each 7.48 20 I Antenna Tags January 20 - oo. c%,
ward 2019
Hose Module Product MSRP
Part Number Description Units MSRP
KIT- HOSE- MOD-2.45 RF Hose Module Kit 2.4ghz Each 375. 00 KIT-HOSE- MOD-3V RF Hose Module Kit( 3V) Each 375. 00
EN- BKT-HOSE- MOD Hose Module Mounting Bracket Each 18.75 HW-TIE- HOSE- MOD Hose Module Kevlar Tie Wrap Each 6.25 RE- HOSE- MOD-2.45 2.4 RE HM with Switch Each 356.25
RF- HOSE- MOD-3V RF Hose Module( 3V) Rev D w/ fuse Each 356.25 RF- HOSE- MOD-BATT Replacable Battery- Hose Module* Each KIT- HOSE- MOD- BATT Replacable Battery- Hose Module# Each Contact factory for pricing.
21 I Hose Module January 2019. o: a + 0
t
ward 2019
AP Wi- Fi Product MSRP
Part Number Description Units MSRP
ANT-0940-2X-B- S Cradlepoint Dual Antenna 700- 2700 MHz Each 243.26 CR- IBR- 650LE-VZ CradlePoint IBR6S0LE-VZ 4G/ 3G w/ o Wi-Fi Each 923. 61 POE- ROUTER4131 Power Over Ethernet Injector Each 70.65 ROUTER- 3131 Client Router AWK-3131- US-T( N) Each 1, 190.95 ROUTER- 4131 AP Router AWK-4131- M12- US-T( N) Each 1, 875.00 SWITCH- 305-T Industrial, Temperature Rated Ethernet Switch Each 478.18 SWITCH- 308- FIB Industrial, Temperature Rated 8 port Switch( 2 fiber SC ports) Each 951. 00 W4- HOTSPOT-CELL Cellular Wi-Fi Hot Spot Each 4,500.00
22 I WI- Fi RF AP January 201- 0- •.
ward 2019
Pulser Relay Kits Product MSRP
Part Number Description Units MSRP
FLOWMETER-PIU51 K24 Pulse Meter Gas/ Diesel 1" M BSP( limited quantity) Each 437.50 KIT-SSR RT FCT Solid State Relay Kit( per hose) Each 315.07 NETWORK- RG1988 Network Card Each 50.00
PULSER-800-F OPW Pulser 120V Each 335. 00
PULSER- FR1 10 110V Pulser FR/ MR110-SO-A Each 337.40
PULSER- FR1- 12 Single Pulser FR/ MR1- 12V SO-Al2VDC Each 281. 15 PULSER- GB1- 12 Gas Boy l 2v Pulser GB1- 12V- SO- A Each 281. 15 PULSER-MR1- 12- S Pulser MR1 12VDC Single Each 281. 15
PULSER- 5P1- 110 110V Pulser SP1- 110V-SO- A Each 337.40 PULSER-SP1- 12 12V Pulser SP1- 12V-SO- A Each 337.40
PULSER-Ti- BD TI- B Dual Pulser Each 275.00
PULSER-TI- BS T1- B Single Pulser Each 275.00
PULSER-VRI- 12- S Pulser VR1- 12- 50-A 12V Each 337.40
RELAY- BRACKETS Relay Brackets- Stainless Steel Each 81. 55 RELAY-SOLSTATE Solid State Relay R531 D40-21 R Each 140.43 23 i Pulser Relay Kits January 20 4ptt0Os..
jward2ijl9
JettScan Product MSRP
Part Number Description- Units MSRP
KIT-JETTSCANW4 W4 JettScan Wi- Fi Kit Each 2,500.00
BATT-JETTSCAN Jettscan Battery Pack Each 115.49
CBL-PGM-JETTCVR CANceiver Cable Programmer Each 81. 52
FLASH-JETTSCAN JettScan Flash Card with Current Software Each 67.93 JETT-DISPCOVER JettScan Screen Cover Each 13. 59
JETT-STYLUS- 1 Stylus- Single Each 16.30
XFMR- JETT JettScan Transformer 12V DC 1. 2Amp Each 61. 14 1OT-PGM- APP IOT Can-Tag- Hose Module- program APP t Each 1OT-INT-EM 1OT Can-Tag- Hose Module- program EM dongle# Each IOT-PGM- HARDWARE IOT Android based Programming Hardware* Each Contact factory for pricing.
24 I JettScan January •+ ` I.

Confidential Document for use by EJ. Ward and its Customers Only. Not for RedistributionWithout Written Permission from EJ. Ward Inc." 80. a« 7 t
it
Ware 2019
Miscellaneous Parts Product MSRP
Part Number Description Units MSRP
EN- 10X8X4 NEMa 4 Enclosure( 10" x 8" x 4") Each 171. 20 EN- 12X12X6 NEMa 4 Enclosure( 12" x 12" x 6") Painted w/ Back Plate Each 271. 74 EN- 12X24X6 HAM 1418a6 Nema Box w/ Back Plate Each 326.09 25 I Miscellaneous Parts January 20
a""'
o
Ward 2019
TLS Interface Product MSRP
Part Number Description Units MSRP
KIT-TLS- NET232 Adapter for TLS Units RS232 to 1145 Each 357. 10 VR- 330020-425 Veeder- Root TCP/ IP Modem TLS/ IP Each 1, 895.00 VR- 331500-308 Veeder- Root Software Upgrade for TLS 35 Each 2,900.00 26 I TLS Interface January 2. a,
wit
ward 2019
Factory Repair Product MSRP
Part Number Description Units MSRP
REP- JETTSCAN- 04 W4Jettscan Repair Each 1, 499.00
27 I Factory Repair January 1;")
Ward 2019
W3 Fuel Control Terminal Product MSRP
Part Number Description Units MSRP
W3 Fuel Control Terminal Retired product line- consult factory. 28 I W3 FCT January 20 ,.> ' F
e
s..
itward 2019
XT Product MSRP
Part Number Description Units MSRP
XT Retired product line- consult factory.
29 I XT January •
1;
4 T
t-Ware2019 GPS — Passive Product MSRP
Part Number Description Units MSRP
CGSOFT-EJW Fleet View- Ward Hosted Software# Contact Factory GPS- PASS- ANT-W4 Passive GPS Antenna for W4 CANceiver Each 93.75 Contact factory for pricing.
30 GPS January 20 rose Swill.
s
ward 2019
GPS - Geotab Product MSRP
Part Number Description Units MSRP
Live
SVP- G- PROPLUS ProPlus Plan Each 31. 67
SVP- G- PRO Pro Plan Each 26.67
SVP- G- BASE Base Plan Each 11. 67
SVP- G- PGPS Third Party Device Plan- PASSIVE GPS Each 6.67 SVP- G- HOS HOS plan- Regulatory Mode Each 16.67
SVP- G- SUSPEND Suspend Plan Each 8.33
SVP- G- SAT Satellite Plan Each 58.33
SVP- G- FAT Fixed Asset Tracker- Flex Asset Tracker( HBN) 4 Each SVP- G- GARPRO Garmin ELD- Pro Mode Each 25.00
SVP- G- GARSUSP Garmin ELD- Suspend Each 11. 67
GO Key/ Driver Tags
KEY-G- NFC- DID Blue NFC Driver IDTag. Used with IOX- NEC Driver IDTag Reader Each 5. 00 KEY-G- NEC- FOB20 Bag of 20 NFC fobs. Includes CSV file of tag IDs Each 67.00

KEY-G- NFC- STKR
NFC Driver ID Sticker Tag with blue inner label. Used with 10X- NFC Driver IDTag Each 5.00 Reader. 40mm(- 1. 52 in diameter.

GO Vehicle Kits/ GO Devices
KEY-G- NEC- STKR20 Bag of 20 NFC stickers. Includes CSV file of tag IDs Each 67.00 VFD- G7- 3GBEL
Vehicle telematics on the Bell network.The GO7 device is suitable for Plug-&- Each 98.00 Play installation.

VTD- G7- 3GROG
G07 3G- Vehicle telematics on the Rogers network in Canada. The GO7 device is Each 98.00 suitable for Plug-&- Play installation.

VTD- G7- 3GTEFA
Vehicle telematics on the Telefdnica network in the Americas. The GO7 device is Each 98.00 suitable for Plug-&- Play installation.

VTD- G7- 3GTEL
GO7 3G- Vehicle telematics on the TELUS network in Canada. The GO7 device is Each 98.00 suitable for Plug-&- Play installation.

VTD- G7- 3GTENA
Vehicle telematics on the Telenor network in the Americas. The GO7 device is Each 98.00 suitable for Plug-&- Play installation.

VTD- G8- LTEATT Multi-mode GOB LTE device w/ 3G fallback for the AT&T network Each 98.00 VTD- G8- LTETMO Single- mode LTE GO8 device for the T-Mobile network Each 98.00 VTD- G8- LTEVZW Single- mode LTE GO8 device for the Verizon network Each 98.00 Ruggedized telematics device for harsh conditions or external installation.

VTD- G7- 3GTEFA Designed to IP67 standards. Ideal for heavy equipment, yellow iron, and Each 198.00 powered assets and trailers. Version for the Americas only.

Hardware Accessories
VTD- G- ELDATT1 Garmin fleet 790 bundled with Geotab Drive for the AT&T network 700.00 HW-G- TIE- Z100 Serialized cable tie, also known as a zip tie( pack of 100) 58.00 Contact factory for pricing.
31 1 GPS- Geotab January - ose
a . F
ward 2019
GPS - Geotab Product MSRP
Part Number Description Units MSRP
lox/ Harnesses/ Adapters
WH- G- BF11A1
Custom proprietary harness for enhanced engine data support on select Fiat/ Each 6.00 Chrysler vehicles in Latin America.

Adapter harness, needed in conjunction with HRN- DSO9T2, HRN- DR09T2 or WH- G- 5504A1 HRN- GS09K2 on 2017 Kenworth and Peterbilt trucks for enhanced engine data Each 14.00 support.

WH- G- B51654 OBDII extension cable pack for GO6 and GO7. Replaces HRN- INSTALLPACKV2. Each 7.00 WH- G- BS16S5 OBDII extension harness for GO6 and GO7- 1. 5 meters in length Each 8.00 WH- G- BU16Y5
OBDII harness for GO6 and GO7. Special vehicle connector to receive engine Each 10.00 data from Mitsubishi Fuso( medium duty) vehicles.

WH-G- CE04A4
Custom proprietary adapter for Volvo vehicles in LatAm and EU. Requires HRNEach 14.00 CM24Y1.

WH-G- CEl0A2
Custom proprietary adapter for Volvo/ Mack FMS vehicles in North America.

Each 24.00 Requires HRN- CM24Y1.

WH-G- CH06A2 Custom Proprietary HINO FMS adapter. Requires HRN- CM24Y1. Each 14.00 WH-G- CK10A2 Custom adapter for Mack vehicles in North America. Requires HRN- CM24Y1. Each 24.00 WH-G- CM24Y1 GO6 and GO7 harness for custom installs. Molex connectors for 2 OBD and one Each 20.00 J1939 connection points.

WH- G- CT06A1 Custom adapter for Tesla( Model 5) vehicles. Requires HRN- CM24Y1. Each 14.00 WH- G- CW0353
3- wire harness for GO7- PWR, GND, IGN. Replaces HRN- 2WCP for GO6 which Each 14.00 cannot take advantage of the IGN wire.

WH-G- CWO8A4
8-wire adapter for vehicles with connectors that are not supported on any other Each 14.00 harness. Requires HRN- CM24Y1.

WH- G- DCO9T2
Special harness for CAT off-road vehicles.Verify vehicle does not use a standard Each 40.00 9- pin connector. GO4 requires an HRN- EZ harness. Replaces HRN-TCATHD.

WH- G- DC14S2 14- pin harness for CAT vehicles 2016+ Each 90.00 9- pin heavy duty T-harness for installations where the Deutsch connector needs WH- G- DR09T2 to remain available for other applications and is a THREADED dash mount style. Each 30.00 Replaces HRN- CD9TBHD.

WH- G- D50654
6- pin straight harness for North American heavy duty Deutsch connector Each 24.00 installations. Replaces HRN- D6HD.

WH- G- D506T2
6- pin heavy duty T-harness for installations where the Deutsch connector needs Each 40.00 to remain available for other applications.

WH- G- D509S4
9- pin straight harness for North American heavy duty Deutsch connector Each 24.00 installations. Replaces HRN- C9HD.

WH- G- D509T2
9- pin heavy duty T-harness for installations where the Deutsch connector needs Each 30.00 to remain available for other applications. Replaces HRN- CD9THD.

WH- G- EA1651
Diagnostic connector designed for EU markets, primarily for the DAF Euro 3( up Each 90.00 to 2006). Replaces HRN- EU16P.

WH- G- EE7451
Mercedes diagnostic connector.Used on older generation medium duty trucks Each 90.00 and buses. Replaces HRN- EU14P.

WH- G- E51251
OBDII harness for GO6 and GO7. Connects to the FMS connector- primarily for Each EU heavy duty vehicles.

24.00 32 I GPS- Geotab January rill;
e-Ward 2019
GPS - Geotab Product MSRP
PartNumber Description Units MSRP
Universal Heavy-Duty T-Harness Kit— Multi- connector kit includes a 9-pin WH- G-G509K2
T-harness and? 4 different mounting adapters for use in most Heavy- Duty Each 40.00 international vehicles. Eliminates the need to know vehicle information in advance. Replaces:? HRN- DRO9T2 and HRN- DS09T2.

Universal OBDII T-Harness Kit- Multi-connector kit includes a T- harness and twelve different mounting adapters for use in most light-duty and mediumWH- G- GS16K2 duty international vehicles. Eliminates the need to know vehicle information Each 40.00 in advance. Replaced: HRN- BE16T2, HRN- BG16T2, HRN-BF16T2, HRN- B516T2, HRN- BT16T2
WH- G- R51252 Connects GO RUGGED to vehicle diagnostic port for engine data Each 20.00 WH- G- RW03S4 3- wire harness for the GO RUGGED— PWR, GND, IGN. Each 20.00 WH- G- RX06S4 Required to connect any lOX to the GO RUGGED Each 20.00 WH- G- UP21 Y2
PSM module connection for Mercedes Sprinters for global markets. Requires Each 16.00 HRN- CM24Y1.

ACS- G- ALERT 10X Add- On for GO6/ 607 to support an alert message to MyGeotab. Each 50.00 ACS- G- AUXM 10X Add- On for GO6/ 607 for auxiliary support Each 48.00 Bluetooth• low energy IOX Add-On, for GO6 and later devices, supporting ACS- G- BT proximity beacons with a public MAC address. Also supports select sensor- Each 65.00 enabled beacons.

ACS- G- BUZZER External buzzer/ beeper for the GO6/ GO7 platform Each 65.00 ACS- G- CAN 10X Add- On for GO6/ 607 for CAN integrations( i. e. Mobileye and Valor) Each 65.00 ACS- G- COMS IOX Add- On for GO6/ 607 for Rexroth Compu-Spread controllers Each 180.00 ACS- G- CRS IOX Add- On for Cirus Controls SpreadSmart Rx spreader controller Each 180.00 ACS- G- DJ IOX Add-On for GO6/ GO7 for DICKEY-john 120.00

ACS- G- GARM- NT
1OX Add-On for G06/ 7 for Garmin PNDs requiring NO traffic services. Supports Each 100.00 PNDs globally.

ACS- G- GARM- WT
IOX Add- On for GO6/ 7 for Garmin PNDs that require traffic services. Supports Each 142.00 North America.

ACS- G- GARM- WTEU
10X Add- On for GO6/ 7 for Garmin PNDs that require traffic services. Supports Each 142.00 Europe, Australia, New Zealand, and South Africa.

ACS- G- TALK Text-to-Speech Speaker for Driver Feedback for the GO6/ 7 platform Each 125.00 ACS- G- HID IOX Add- On for GO6/ GO7 for HID Interface( school bus) Each 120.00

ACS- G- NFC- READ
NFC Tag Reader with mounting bracket ONLY- used for Driver ID. NFC Tags sold Each 75.00
separately.

ACS- G- OUTPUT 10X Add- On for 606/607 for controlling a relay from MyGeotab. Each 42.00 ACS- G- RS232- F IOX Add- On for 606/607 for RS232 support( female connector) Each 58.00 ACS- G- RS232- M IOX Add-On for GO6/ GO7 for R5232 support( male connector) Each 58.00 ACS- G- SATIRDV2
IOX Add- On for GO6/ 607 for Iridium satellite support( includes Iridium modem Each 665. 00
and antenna)
ACS- G- U56
IOX Add- On for GO6/ 607 that allows two-way data transfer and charging of Each 58.00 external devices. Uses Female USB Type-A connector.

HW-BRKT-BSF Bracket required for 2015 Ford F- 150, Ford Fusion and Ford Mondeo vehicles. Each 2.00 HW- BRKT-INSTALL Mounting bracket and material for G06/ 607. Includes 2 zip ties, 2 screws, and Each 6.00 double- sided tape for the bracket for installation purposes. 33 I GPS- Geotab January20 000x°94
Lary
ward 2019
GPS - Geotab Product MSRP
Part Number Description Units MSRP
HW-BRKT-NFC Mounting bracket and holder for 10X- NFCREADER. Includes 2 screws and Each 5. 00 double- sided tape for the bracket for installation purposes.

ACS- RELAY
Driver ID Relay kit for GO4v3 and GO6 and G07. Requires professional • Each 33. 00 installation by a licensed automotive electrician/ mechanic. 34 I GPS- Geotab January 400e1000.
award 2019
EV Charging Stations Product MSRP
Part Number DescriptionPorts MSRP
Level 2 Charger
P105W PRO SERIES, 10 RPH, SINGLE, WALL, 16 amp 1 2,493. 75 P20SW PRO SERIES, 20 RPH, SINGLE, WALL, 30 amp 1 2,493. 75 P30SW PRO SERIES, 30 RPH, SINGLE, WALL, 40 amp 1 4,504.17 P10DW PRO SERIES, 10 RPH, DUAL, WALL, 16 amp 2 3, 497.92 P20DW PRO SERIES, 20 RPH, DUAL, WALL, 30 amp 2 3, 497.92 P30DW PRO SERIES, 30 RPH, DUAL, WALL, 40 amp 2 5, 510.42 PI OSP PRO SERIES, 10 RPH, SINGLE, PEDESTAL, 16 amp 1 2, 827.08 P20SP PRO SERIES, 20 RPH, SINGLE, PEDESTAL, 30 amp 1 2,827.08 P30SP PRO SERIES, 30 RPH, SINGLE, PEDESTAL, 40 amp 1 4, 839.58 PI ODP PRO SERIES, 10 RPH, DUAL, PEDESTAL, 16 amp 2 3, 737. 50 P20DP PRO SERIES, 20 RPH, DUAL, PEDESTAL, 30 amp 2 3, 737.50 P30DP PRO SERIES, 30 RPH, DUAL, PEDESTAL, 40 amp 2 5, 750.00 CORD- RETRACT EV Charge Solutions Univ. Cord Retractor 79', Single 1 501. 67 Level 3 DC Fast Charger
L3- 50- CS- 480
50kw Dual- Level 3 DC Fast Charger,Standard Housing, 50kW, Dual Connector 2 37,583.33 CCS& CHAdeMO) 208v/ 3ph- PEDESTAL
L3- 50- CS- 480 SLIMLINE
50kw Dual- Level 3 DC Fast Charger,Slimline Housing, 50kW, Dual Connector 2 42, 166.67 CCS& CHAdeMO) 208v/3ph- PEDESTAL
L3- 50- CS- 208
50kw Dual- Level 3 DC Fast Charger,Standard Housing, 50kW, Dual Connector 2 39,316.67 CCS& CHAdeMO) 208v/ 3ph- PEDESTAL
L3-50-CS- 208- SLIMLINE
50kw Dual- Level 3 DC Fast Charger, SlimLine Housing, 50kW, Dual Connector 2 43,916.67 CCS& CHAdeMO) 208v/ 3ph
L3- 25- CS- 480
25kW- Dual- Level 3 DC Fast Charger, Standard Housing, 25kW, Dual Connector 2 33,250.00 CCS& CHAdeMO) 480v/ 3ph
L3-25- CS- 480 SLIMLINE
25kW- Dual- Level 3 DC Fast Charger, Slimline Housing, 25kW, Dual Connector 2 38,041. 67 CCS& CHAdeMO) 480v/ 3ph
L3- 25- CS- 208
25kW- Dual- Level 3 DC Fast Charger, Standard Housing, 25kW, Dual Connector 2 535,200.00 CCS& CHAdeMo) 208v/ 3ph
L3- 25- CS- 208 SLIMLINE
25kW- Dual- Level 3 DC Fast Charger, Slimline Housing, 25kW, Dual Connector 2 39,783.33 CCS& CHAdeMO) 208v/ 3ph
L3-50-XS- 480
50kW- Single- Level 3 DC Fast Charger, Standard Housing, 50kW, Single 2 33,916.67 Connector( CCS) 480v/ 3ph
L3-50-XS- 480 SLIMLINE
50kW- Single- Level 3 DC Fast Charger, Slimline Housing, 50kW, Single 2 38,500.00 Connector( CCS) 480v/ 3ph
L3-50-XS- 208
50kW- Single- Level 3 DC Fast Charger, Standard Housing, 50kW,Single 2 35,658.33 Connector( CCS) 208v/ 3ph
L3- 50-XS- 208 SLIMLINE
50kW- Single- Level 3 DC Fast Charger, Slimline Housing, 50kW, Single 2 40,241. 67 Connector( CCS) 208v/3ph
Options
CHAdeMO OPTION- Exchange CCS plug for CHAdeMO( add) Each 916.67 Payment OPTION- Payment System configuration& hardware( add) Each 3,208.33 EV Interface Board EV Charger Wired EV interface with individual metering One( 1) per Charger- Single device can handle dual charger Each 750.00
35 IEV Charging Stations January Q9 PoB
auw
ward 2019
Tank Level Gauging - Omntec Product MSRP
Part Number Description Units MSRP
Tank Level Gauging
OELB000IIIB4 PROTEUS- B controller with 7' color touch screen and( 1) RS- 232 port. Accepts up Each 2, 583. 75 to 4 MTG Series magnetostrictive probes and 16 BX Series leak sensors.

OEL800011188 PROTEUS- B controller with 7' color touch screen and( 1) RS- 232 port. Accepts up Each 2, 513. 75 to 4 MTG Series magnetostrictive probes.

PROTEUS- K controller with 7' color touch screen,( 1) RS- 232 port, and Ethernet.

OEL8000111K4 Accepts up to 4 MTG Series magnetostrictive probes and 16 BX Series leak Each 3, 556.25 sensors.

PROTEUS- K controller with Tcolor touch screen, printer,( 1) RS- 232 port, and OEL8000111K4P Ethernet. Accepts up to 4 MTG Series magnetostrictive probes and 16 BX Series Each 4,428. 75 leak sensors.

OEL8000111K8
PROTEUS- K controller with 7' color touch screen,( 1) RS- 232 port, and Ethernet.

Each 3, 783. 75 Accepts up to 8 MTG Series magnetostrictive probes.

PROTEUS- X controller with 7" color touch screen, ( 2) RS- 232 ports, and Ethernet.

OEL8000llIX
Capable ofaccepting up to 16 MEG Series magnetostrictive probes and 64 BX Each 5, 651. 25 Series leak sensors.( Comes standard with( 1) XB-416 module accepting up to 4 MTG Series magnetostrictive probes and 16 BX Series leak sensors.) PROTEUS- X controller with 7" color touch screen, printer,( 2) RS- 232 ports, and Ethernet. Capable of accepting up to 16 Mit Series magnetostrictive OEL8000111XP probes and 64 BX Series leak sensors.( Comes standard with( 1) XB- 416 module Each 6, 526.25 accepting up to 4 MTG Series magnetostrictive probes and 16 BX Series leak sensors.)
PROTEUS- X Interface Boards
XB- 416 4 probe and 16 leak sensor module for PROTEUS-X controller. 931. 25 XB- RBS 8 channel relay board for PROTEUS- X controller. Each 856.25 XB- 410 4 channel relay board for PROTEUS- X controller. Each 856.25

MAGNETOSTRICTIVE PROBES
Magnetostrictive gauging probe with stainless steel shaft for most hydrocarbons and liquids.* Must specify tank diameter and content. Includes: MTG up to 10' MTG-* 132" overall length), installation kit, product and water floats, splice kit, 4 inch Each 2,050.00 NPT riser cap, and cable clamp assembly. Available in standard and custom lengths up to 24 feet, consult factory for pricing.

MTG- V--*
Magnetostrictive gauging probe up to 10' for inventory only. Includes same as Each 1, 723.75 above. Available in standard and custom lengths.

Single temperature magnetostrictive gauging probe up to 96" overall length MTG- F- R1"
with flexible shaft for most hydrocarbons and chemicals. Overall lengths Each 2,445.00 available up to 701 Material of construction— Kynar•. Does NOT include floats or weight. Flex probes are also available with 5 temperature sensing points.

MTG- 420-*
4- 20 milliamp magnetostrictive gauging probe up to 96'. Consult factory for Each 2, 396.25 lengths above 96'. Does not include float.

IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.
36 Tank Level Gauging January ,: ii0°O° F.
4c" ,,'-
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number . Description Units MSRP
PROTEUS PK OEL8000111 Kits
One Tank Kit to include:
1) 0EL8000111K4* PROTEUS Tank Gauging System
1) PS- 103 Printer
PK1 1) MTG- V Inventory only 316 grade ss rigid gauging probe up to 132' overall Each 6,270.00 length
1) SSF- 2 Stainless Steel Float Kit
1) 21N- CAP- AST 2" Cap Assembly Kit
Two Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
1) PS- 103 Printer
PK2 2) MTG- V Inventory only 316 grade ss rigid gauging probe up to 132" overall Each 7,852.50 length
2) SSF- 2 Stainless Steel Float Kit
2) 21N- CAP-AST 2" Cap Assembly Kit
Three Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
1) P5- 103 Printer
PK3 3) MTG- V Inventory only 316 grade ss rigid gauging probe up to 132" overall Each 9,436.25 length
3) SSF- 2 Stainless Steel Float Kit
3) 21N- CAP-AST 2" Cap Assembly Kit
Four Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
1) PS- 103 Printer
PK4 4) MTG- V Inventory only 316 grade ss rigid gauging probe up to 132' overall Each 11, 020.00 length
4) SSF- 2 Stainless Steel Float Kit
4) 21N- CAP-AST 2' Cap Assembly Kit
One Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
PKI NP
1) MTG-V Inventory only 316 grade ss rigid gauging probe up to 132' overall Each 5, 477.50 length
1) SSF- 2 Stainless Steel Float Kit
1) 2IN- CAP-AST 2" Cap Assembly Kit
Two Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
PK2NP
2) MTG-V Inventory only 316 grade ss rigid gauging probe up to 132" overall Each 7, 061. 25 length
2) SSF- 2 Stainless Steel Float Kit
2) 21N- CAP-AST 2" Cap Assembly Kit
Three Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
PK3NP
3) MTG-V Inventory only 316 grade ss rigid gauging probe up to 132" overall Each 9,172. 50 length
3) SSF- 2 Stainless Steel Float Kit
3) 21N- CAP-AST 2" Cap Assembly Kit
IMPORTANT: PROTEUS PK Tank Gauging Kits do not come pre- programmed. 37 I Tank Level Gauging January 20"
swyn
k^w
Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Four Tank Kit to include:
1) OEL8000111K4* PROTEUS Tank Gauging System
PK4NP
4) MTG-V Inventory only 316 grade ss rigid gauging probe up to 132" overall Each 10,756.25 length
4) SSF- 2 Stainless Steel Float Kit
4) 21N- CAP-AST 2" Cap Assembly Kit
PKPF PROTEUS PKOEL8000111 Kit preprogramming fee Each 265. 00

INTERSTITIAL SPACE, CONTAINMENT SUMP,& DISPENSER PAN SENSORS BX- PDWF-4
Product distinguishing sensor for monitoring the dry interstice of double-wall BX- PDWF-6 fiberglass tanks. Please select the appropriate part number based on the tanks Each 510.00 BX- PDWF- 8 diameter in feet and specify tank manufacturer. BX- PDWF- 10 BX- LWF-4
BX- LWF-6 Non product distinguishing sensor for monitoring the dry interstice of doublewall fiberglass tanks. Please select the appropriate part number based on the Each 348.75 BX- LWF-B tanks diameter in feet and specify tank manufacturer. BX- LWF- 10

BX- PDWS
Product distinguishing sensor for monitoring the dry interstice ofdouble- wall Each 437.50 steel tanks. Comes with 25' of cable.

BX- LWS
Non product distinguishing sensor for monitoring the dry interstice of doubleEach 380.00 wall steel tanks. Comes with 25' of cable.

BX- LWS- PVC
Non product distinguishing sensor constructed of PVC for monitoring the dry Each 537.50 interstice of double- wall steel tanks. Comes with 25' of cable.

BX- LWS- SS
Non product distinguishing sensor constructed of stainless steel for monitoring Each 576.25 the dry interstice of double-wall steel tanks. Comes with 25' of cable.

BX- LWS-.895
Non product distinguishing sensor, 0.895" in diameter, for monitoring the dry Each 781. 25 interstice ofdouble-wall steel tanks. Comes with 25' of cable

BX- RES
Non product distinguishing sensor for monitoring level changes in the reservoir Each 510.00 of brine-filled, double- wall fiberglass tanks.

Non product distinguishing sensor for monitoring containment sumps, BX- LS dispenser pans, interstice of steel tanks and other containment areas. Comes Each 338.75 with 12' of cable.

Non product distinguishing sensor constructed of PVC for monitoring BX- LS- PVC containment sumps, dispenser pans, interstice of steel tanks and other Each 537.50 containment areas. Comes with 12' of cable.

Non product distinguishing sensor constructed of stainless steel for monitoring BX- LS- SS containment sumps, dispenser pans, interstice of steel tanks and other Each 537.50 containment areas. Comes with 12' of cable.

Non product distinguishing sensor, 1. 25" in diameter, for monitoring BX- LS- 1. 25 containment sumps, dispenser pans, interstice of steel tanks and other Each 593.75 containment areas. Comes with 12' of cable.

Non product distinguishing sensor, 0.895" in diameter,for monitoring BX- L5-.895 containment sumps, dispenser pans, interstice of steel tanks and other Each 617.50 containment areas. Comes with 12' of cable.

IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.

PLEASE NOTE: Sensors for nonstandard monitoring ports& chemical applications requiring different materials of construction also available.
38 Tank Level Gauging January 2•
w,µ y{'
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP

BX- LS- FL
Non product distinguishing sensor for floor containment area. Comes with 12' Each 537.50 of cable.

Product distinguishing sensor for monitoring containment sumps, dispenser BX-PDS pans, interstice of steel tanks and other containment areas. Comes with 12' of Each 412. 50 cable.

Product distinguishing sensor, 0.895" in diameter,for monitoring containment BX-PDS-.895 sumps, dispenser pans, interstice of steel tanks and other containment areas. Each 740.00 Comes with 12' of cable.

BX- PDS- FL
Product distinguishing sensor for floor containment area. Comes with 12' of Each 576.25 cable.

SINGLE POINT BX SERIES OPTIC SENSOR
BX- L1 2 12 inch hi level optic sensor Each 291. 25
BX- L20 20 inch hi level optic sensor Each 372. 50
BX-LV Customer specified length hi level optic sensor up to 96" Each 576.25

SINGLE POINT BX SERIES FLOAT SENSOR
BX- LF- 1- 12 12" hi level float sensor with brass stem and Buna N floats. Includes( 1) BX- UT. Each 493.75 BX- LF- 1- D
Customer specified length hi level float sensor, with brass stem and Buna N Each 1, 27625 floats up to 72". Includes( 1) BX- UT.

BX- LF- 1- SS- 12 12" hi level float sensor with stainless steel stem and floats. Includes( 1) BX-UT. Each 657.50 BX- LF- 1- SS- 20 20" hi level float sensor with stainless steel stem and floats. Includes( 1) BX-UT. Each 657.50

BX- LF- I- SS- D
Customer specified length, hi level float sensor, with SS stem and floats up to Each 1, 57625 72'. Includes( 1) BX- UT.

MISCELLANEOUS SENSORS
BX-VS Sensor for monitoring hydrocarbon vapors. 617.50
BX-TC1 Temperature Sensor ie: refrigeration, room temperature, compressors Each 412.50 BX- PDWL Monitoring Well Sensor up to 25'. If well is wet must order additional BX- UT for Each 1, 303.75 low water alarm.

OIL WATER SEPARATOR SENSORS
BX- OWI- t
Single point oil/ water interface sensor for high oil level used in oil/ water Each 748.75 separators. Includes( 1) BX- UT. Available in standard and custom lengths.

BX- OWI-2
Two point oil/ water interface sensor for high and caution oil level used in oil/ Each 923.75 water separators. Includes( 2) BX- UT. Available in standard and custom lengths.

Cable- PVC Jacketed, UL-listed, tt22AWG with shield and drain EC- 2 500' spool of 2 conductor cable for use with MTG- probe Each 277.50 EC- 4 1000' spool of 4 conductor cable for use with sensors Each 642.50 EC- 6 1000' spool of 6 conductor cable Each 985.00
OEL800011 COMMUNICATION OPTIONS
IB- RB- 2 Interface board- relay card with( 4) Samp SPDT relays- 6 card max per system Contact factory.

IB- RAS
Interface board required for the RAS hi level audio/ visual remote annunciator.

Accepts multiple Contact factory. remotes.

IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.
39 Tank Level Gauging January20 A:. 4******
tWard 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP'
IB- 12V
Interface board- 12 VDC Low voltage output board for remote annunciators Contact factory. triggered by all alarms.

IB- C420- 4 4-20mA output board for up to 4 tanks Contact factory.

IB- NET-3 Interface board- Ethernet/ network communication Contact factory.

MODBUS MODBUS RTU upgrade Contact factory.

MDR- 2 Fax/ Modem- 14400 baud Contact factory.

OMN- PC
Windows 2000/ NT/XP/ ME compatible tank monitoring communication Contact factory. software
PROTEUS° Series COMMUNICATION OPTIONS
MODBUS MODBUS RTU upgrade Each 985. 00
X232-420-2
2) channel external RS- 232 to 4-20 ma converter with( 4) SPST 1 amp relay Each 1, 067.50 outputs housed in steel enclosure for PROTEUSa Series controllers X232-420-6
6) channel external rs- 232 to 4- 20 ma converter with( 4) SPST 1 amp relay Each 1568.75 outputs housed in steel enclosure for PROTEUS5 Series controllers MDR- 3 Modem- 14,400 baud for OEL800011I controller Each 593. 75 C232- BAC External RS- 232 to BACnet/ IP converter Each 2,488.75

OMN- PC
Windows 2000/ NT/XP/ ME compatible tank monitoring communication Each 821. 25
software
XB- RB8 8 channel relay board for PROTEUS- X controller. Each 856.25 WCDM-*
Wireless cellular data modem.* denotes type of cellular service. Cellular Each 1, 332.50 activation and service not included.

DB- 485 RS- 485 board for PROTEUS- K system Each 298.75 XC- R8 External relay box for use with OEL8000111K controllers. Each 955.00 AD- 8- 1
Voice auto dialer for up to( 2) alarm conditions and( 4) phone numbers per Each 602.50
alarm.

REMOTE OVERFILL ANNUNCIATORS
Low voltage high level remote audio/ visual annunciator with acknowledge switch/ test switch( test feature available when used with OEL80001I firmware RAS- 1 version 5.55 or greater). For use with OEL800011, K- OEL800011 Kits, and Each 340.00 OEL8000111K& X controllers. Part# denotes the number of tanks. Note: IB- RAS is required when using RAS- series remotes.

Low voltage high level remote audio/ visual annunciator with acknowledge switch/ test switch( test feature available when used with OEL80001I firmware RAS- 2 version 5.55 or greater). For use with OEL800011, K- OEL800011 Kits, and Each 381. 25 OEL8000IIIK& X controllers. Part it denotes the number of tanks. Note: IB- RAS is required when using RAS- series remotes.

Low voltage high level remote audio/ visual annunciator with acknowledge switch/ test switch( test feature available when used with OEL80001I firmware RAS- 3 version 5. 55 or greater). For use with OEL800011, K- OEL800011 Kits, and Each 425.00 OEL8000111K& X controllers. Part# denotes the number of tanks. Note: IB- RAS is required when using RAS- series remotes.

Low voltage high level remote audio/ visual annunciator with acknowledge switch/ test switch( test feature' available when used with OEL80001I firmware RAS- 4 version 5.55 or greater). For use with OEL800011, K- OEL800011 Kits, and Each 500.00 OEL8000111K& X controllers. Part# denotes the number of tanks. Note: IB- RAS is required when using RAS- series remotes.
40 I Tank Level Gauging January 20/: pae
eval& C8S
Ward 2019
Tank Level Gauging — Omntec Product Price List
Part Number Description Units MSRP
Low voltage high level remote audio/ visual annunciator with acknowledge switch/ test switch( test feature available when used with OEL800011 firmware RAS- 1- NYS version 5.55 or greater). For use with OEL800011, K- OEL800011 Kits, and Each 493.75 OEL8000111K& X controllers. NYS model has high intensity strobe and highdecibel horn. Note: IB- RAS is required when using RAS- series remotes.

OFAS- AL 18" x 24"Yellow aluminum fill alarm sign with black 2" print Each 373.75 Delivery Defender Lite universal remote overfill alarm for up to four tanks with DDL-1 lights for hi level, system normal, delivery in progress, acknowledge/ test switch, Each 1, 583.75 and audio/ visual horn.

Delivery Defender Lite universal remote overfill alarm for up to four tanks with DDL-2 lights for hi level, system normal, delivery in progress, acknowledge/ test switch, Each 1, 651. 25 and audio/ visual horn.

Delivery Defender Lite universal remote overfill alarm for up to four tanks with DDL-3 lights for hi level, system normal, delivery in progress, acknowledge/ test switch, Each 1, 716.25 and audio/ visual horn.

Delivery Defender Lite universal remote overfill alarm for up to four tanks with DDL-4 lights for hi level, system normal, delivery in progress, acknowledge/ test switch, Each 1, 782.50 and audio/ visual horn.

REMOTE DISPLAYS
RD625- 1
Remote LED display for level indication. NEMA 4X enclosure. Number of tanks is Each 1, 560.00 denoted in the part number.

RD625- 2
Remote LED display for level indication. NEMA 4X enclosure. Number of tanks is Each 2,867.50 denoted in the part number.

RD625- 3
Remote LED display for level indication. NEMA 4X enclosure. Number of tanks is Each 4,668.75 denoted in the part number.

RD625- 4
Remote LED display for level indication. NEMA 4X enclosure. Number of tanks is Each 6,221. 25 denoted in the part number.

RD7CTS
PROTEUS Mini- Me universal remote ATG monitor with Tcolor touch screen Each 1, 413.75 display for audio/ visual alarms and current inventory.

RD7CTS- P
PROTEUS Mini-Me universal remote ATG monitor with printer and Tcolor touch Each 2,737.50
screen display for audio/ visual alarms and current inventory PROTEUS Mini-Me RS- 485 version remote ATG monitor with 7" color touchscreen RD7CTS- 485 display for audio/ visual alarms and current inventory for distances up to 3000 Each 2,340.00 feet( for use with PROTEUS- K or PROTEUS-X controllers only) PROTEUS Mini-Me Accessories
RD- PCK Power cord kit for use with PROTEUS remote displays Each 125. 00 RD- 232C- 75 75 feet RS232 cable for use with RD7CTS remote display Each 121. 25 C232- 422-RD7CTS
RS- 232- 422 Booster Kit to increase distance of RS- 232 output 3,000 feet for use Each 1, 227.50 with RD7CTS remote display( Includes 2 converters and 2 power transformers) WRS- 232 Wireless RS- 232 link includes both tank gauge and remote transceivers Each 1, 328.75 WRS- 232R Wireless RS- 232 repeaterfor extending WRS- 232 wireless reach Each 1, 016.25 ENC- 4X-RD7
Nema 4X enclosure for RD7CTS( requires HTR- 1 heater and TEM- CS thermostat if Each 843. 75 being mounted outdoors)

PORTABLE SUMPTESTER KITS
41 I Tank Level Gauging January 201;;; 40N00,‘
ban Hwy
Nwwdi
Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Sump containment leak detection kit including portable suitcase, OEL800011 CLD3* with printer, quick connect box, MTG probes with one 2" SS float per probe. ending digit on part number denotes number of probes, ie. CLD3 comes with Each 14855.00
3) MTG probes)
Sump containment leak detection kit including portable suitcase, OEL800011 CLD4* with printer, quick connect box, MTG probes with one 2' SS float per probe. ending digit on part number denotes number of probes, ie. CLD3 comes with Each 16,295.00
3) MTG probes)
Sump containment leak detection kit including portable suitcase, OEL800011 CLD6• with printer,quick connect box, MTG probes with one 2" SS float per probe. ending digit on part number denotes number of probes, ie. CLD3 comes with Each 20,862.50
3) MTG probes)
Sump containment leak detection kit including portable suitcase, OEL800011 CLD8* with printer,quick connect box, MTG probes with one 2" SS float per probe. ending digit on part number denotes number of probes, ie. CLD3 comes with Each 24,566.25
3) MTG probes)

ACCESSORIES
21N- CAP 2" Cap for MTG probes and sensors Each 63.75
41N- CAP 4" Cap for MTG probes and sensors Each 78.75
BNF- 1- 4 Single Buna N product float, 3. 85" diameter Each 118.75 BNF- 4 Dual Buna N product/ water floats 3.85" diameter Each 230.00 BX- UT Universal translator for dry contact inputs from non- BX sensors Each 248.75 C232- 422 RS- 232 booster kit to increase distance of RS- 232 output Each 821. 25 CITLD CODE Continuous In Tank Leak Detection software for OEL800011 and K-OEL800011 Each 1, 422.50 CFTLD CODE- P Continuous In Tank Leak Detection software for PROTEUS Series Each 1, 422.50 DPU- 6PK Six pack of thermal printer paper Each 62.50
DPU- 50 Case of thermal printer paper- 50 rolls Each 250.00 ENC- 4X
NEMA 4X enclosure for OEL800011, OEL8000111K, and OEL8000111X( may require Each 821. 25 HTR- 1 heater and TEM- CS thermostat if mounting controller outdoors) FLT-H- 2 2' Hastelloy float for chemical applications Each 1, 597.50 FtTR- 1 Heater for OEL80001I NEMA 4X enclosure Each 493.75 MAGSHIELD MTG magnetic shield for magnetized riser applications Each 330.00 PS- 102 36 character thermal printer for OEL800011 Contact factory.

PS- 102- CORE PS- 102 core charge. Credit to be issued when PS- 102 in field is returned. Contact factory.

PS- 103 32 character thermal printer for PROTEUS- K Each 876.25 SFS Stainless steel float spacer( for dual float probes with overall length greater than Each 53.75 288)
SK-4 Silicone splice kit for sensors and MTG probes Each 37.50 SL-34
Stainless steel swage lock( probe head isolation for chemical and# 6 oil Each 126.25
applications)
SP- 2 120VAC surge protector Each 396.25
SSF- 1- 2 Single 316 stainless steel product float, 1. 83" diameter Each 171. 25 SSF- 1- 2- VB 2' stainless steel product float for low product detection applications Each 256.25 SSF- 1- 2W-VB 2' stainless steel water float for low water detection applications Each 256.25 42 Tank Level Gauging January 207 r, 001,:,,
ww!!!
F
award 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
SSF- 1- 4 Single 316 stainless steel product float, 3. 85" diameter Each 312.50 SSF- 2 Dual 316 stainless steel product/ water float, 1. 83" diameter Each 340.00 SSF- 4 Dual 316 stainless steel product float, 3. 85" diameter Each 562.50 TEM- CS Thermostat for the OEL800011 NEMA 4X enclosure Each 248.75 VC- 1 4" vented cap for brine filled reservoirs Each 166.25 LU SERIES CONTROLLERS( Non Product Distinguishing)
Single channel liquid sensing audio/ visual controller capable of accepting up to one single point optic sensor. Low voltage outputs standard for optional LW RA- Series remote audio/ visual annunciator(s). One normally open relay. Test Each 828.75 push button and Acknowledge push button switches are standard. Type 4X enclosure is standard.

Two channel liquid sensing audio/ visual controller capable of accepting up to two single point optic sensors. Low voltage outputs standard for optional LU2 RA- Series remote audio/ visual annunciator(s). Two normally open relays. Test Each 1, 006.25 push button and Acknowledge push button switches are standard. Type 4X enclosure standard.

Three channel liquid sensing audio/ visual controller capable of accepting up to three single point optic sensors. Low voltage outputs standard for optional LU3 RA- Series remote audio/ visual annunciator(s). Three normally open relays. Test Each 1, 435.00 push button and Acknowledge push button switches are standard. Type 4X enclosure standard.

Four channel liquid sensing audio/ visual controller capable of accepting up to four single point optic sensors. Low voltage outputs standard for optional LU4 RA-Series remote audio/ visual annunciator(s). Two normally open relays. Test Each 1, 603.75 push button and acknowledge push button switches are standard type. Type 4X enclosure standard.

Six channel liquid sensing audio/visual controller capable of accepting up to six single point optic sensors. Low voltage outputs standard for optional RA-Series LU6 remote audio/ visual annunciator(s). One normally open relay. Test push button Each 1, 896.25 and Acknowledge push button switches are standard. Type 4x enclosure standard.

Nine channel liquid sensing audio/ visual controller capable of accepting up to LU9 nine single point optic sensors. Low voltage outputs standard for optional RASeries remote audio/ visual annunciator(s). Test push button and Acknowledge Each 2, 273.75
push button switches are standard. Type 4X enclosure standard.

NON PRODUCT DISTINGUISHING SENSORS for LU Series Controllers

LS- ASC
Sensor for monitoring containment sumps, dispenser pans, the interstice of Each 315.00
double wall steel tanks, and other containment areas.

Sensor for monitoring the interstice of double wall fiberglass tanks. * Please LWF-* select the appropriate part number based on the tanks diameter in feet and Each 340.00 specify tank manufacturer.

LWS
Sensor for monitoring the interstice of double wall steel tanks. Comes with 25' Each 390.00
of cable.

LPD SERIES CONTROLLERS( Product Distinguishing)
43 Tank Level Gauging January 201• -/"
fOOyO'
q;.
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Three channel product distinguishing audio/ visual controller capable of accepting any combination of up to three L-Series or three PD-Series sensors.

L1 PD2 Low voltage outputs standard for RA-Series remote audio/ visual annunciation. Each 2,527.50 Comes standard with three normally open relays. Test push button and Acknowledge push button switches, type 4X enclosure standard.

Six channel product distinguishing audio/ visual controller capable of accepting any combination of up to six L-Series or six PD- series sensors. Low voltage L2PD4 outputs standard for RA-Series remote audio/visual annunciation. Comes Each 2,781. 25 standard with two normally open relays. Test push button and Acknowledge push button switches, type 4X enclosure standard.

Nine channel product distinguishing audio/ visual controller capable of accepting any combination of up to nine L-Series sensors or nine PD series L3PD6 sensors. Low voltage outputs standard for RA-Series remote audio/ visual Each 3,075.00 annunciation. Comes standard with three normally open relays. Test push button and Acknowledge push button switches, type 4X enclosure standard.

PRODUCT DISTINGUISHING SENSORS for LPD Series Controllers Product distinguishing sensor for monitoring the interstice of double wall PDWF-* fiberglass tanks. * Please select the appropriate part number based on the tanks Each 448.75 diameter in feet and specify tank manufacturer.

PDWS
Product distinguishing sensor for monitoring the interstice of double wall steel Each 448.75 tanks. Comes with 25' of cable.

PDS
Product distinguishing sensor for monitoring containment sumps, dispenser Each 381. 25
pans, the interstice of double wall steel tanks, and other containment areas.

L- R- 1 Sensor for brine filled reservoir of double wall fiberglass tank. Each 548.75 LEVEL SENSORS for LPD and LU Series Controllers
L- 1- S L- 1- S ( 12 inch sensor) Each 298.75
L- 1- L L- 1- L ( 20 inch sensor) Each 381. 25
L-1- D L- 1- D( Variable length sensor," D" must be specified by user, up to 72") Each 592.50 Two point liquid level sensor. Mounts via 2" NPT at top of tank. For use in High/ Caution level applications when used with LU- series controller. "A" denotes high L-2- S up to& incl. 36" level dimension and" B" denotes caution level dimension. Also for use in High/ Each 636.25 Low level applications when used with LU- SP controllers. Dimensions must be specified by user.

Two point liquid level sensor. Mounts via 7 NPT at top oftank. For use in High/ Caution level applications when used with LU- series controller. "A" denotes high L-2- L above 36' up to 72' level dimension and" B" denotes caution level dimension. Also for use in High/ Each 676.25 Low level applications when used with LU-SP controllers. Dimensions must be specified by user.

L-3- L L-3- LThree point optic sensor up to 72' Each 843.75 L-4- L L-4- L Four point optic level sensor. Each 1, 147.50

BATTERY BACKUP CONTROLLERS
LU1- SP7 Single channel controller to accept up to( 1) non distinguishing optic sensor. Each 1, 141. 25 LU2- SP7 Two channel controller to accept up to( 2) non distinguishing optic sensors. Each 1, 392.50 LU3- SP7 Three channel controller to accept up to( 3) non distinguishing optic sensors. Each 1, 828.75 IMPORTANT: Hi level optic sensors. Mounts via 2" NPT at top of tank.

Consult factory for custom length sensors greater than 72" 44 Tank Level Gauging January 20 ""
cfrw%
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
LU4-5P7 Four channel controller to accept up to( 4) non distinguishing optic sensors. Each 2,215.00 BB12.0AH Battery back-up enclosure used with SP7 controllers. Each 498.75 SLR- PS( solar anel) Solar powered battery backed controllers are also available for applications p
where supply voltage is not present.

Each 797. 50
SLR- BCC Battery charge controller for solar panel to prevent overcharging of battery Each 676.25

LU- OW CONTROLLERS
Single channel high oil level audio/ visual controller capable of accepting one LU1- OW
single point OWI- 1 sensor. Low voltage outputs standard for optional RA- Series Each 837. 50
remote audio/ visual annunciator(s). One normally open relay, test push button, acknowledge push button and type 4X enclosure standard.

Two channel high level audio/ visual controller capable of accepting up to two single point OWI- 1 sensors or one OWI- 2 sensor. Low voltage outputs standard LU2- OW for optional RA- Series remote audio/ visual annunciator(s). Two normally open Each 1, 012.50 relays, test push button, acknowledge push button and type 4X enclosure standard.

Two channel( high oil level with pump out capability) audio/ visual controller capable of accepting one OWP- 2 sensor. Low voltage outputs standard for LU2- OWP optional RA-Series remote audio/visual annunciator(s). Two normally open Each 1, 181. 25 relays, test push button, acknowledge push button and type 4X enclosure standard.

Two channel( combination leak sensing/ high oil level) audio/ visual controller capable of accepting one OWI- 1 sensor and one leak sensor. Low voltage LU2- OWIR outputs standard for RA-Series remote audio/visual annunciator(s). Three Each 1, 476.25 normally open relays, test push button, acknowledge push button and type 4X enclosure standard.

Three channel( combination leak sensing/ high oil level) audio/ visual controller capable of accepting one OWI- 2 sensor and one leak sensor. Low voltage LU3- OWIR outputs standard for optional RA- Series remote audio/visual annunciator(s). Each 1, 645.00 Three normally open relays, test push button, acknowledge push button and type 4X enclosure standard.

Three channel( combination leak sensing/ high oil level) audio/ visual controller capable of accepting one OWP- 2 sensor and one leak sensor. Low voltage LU3- OWPR outputs standard for optional RA- Series remote audio/visual annunciator(s). Each 51, 686.25 Three normally open relays, test push button, acknowledge push button and type 4X enclosure standard.

LU- OW SENSORS
OWI- 1
point oil/ water interface sensor for hi oil level used in oil/ water separators.

Each 500.00 Available in standard and custom lengths.

Two point oil/ water interface sensor for hi and caution oil level used in oil/ water OWI- 2 separators. Available in standard and custom lengths.

Each 63625
Two point sensor with one oil/ water interface float and one liquid level float for OWP- 2 hi oil and low liquid level used in oil/ water separators. Can be used in pump out Each 636.25 applications. Available in standard and custom lengths.

REMOTE ANNUNCIATORS
LU- SP7 series controllers utilize same sensors as standard LU series controllers 45 I Tank Level Gauging January 20,,, 001°° .:
awns
or
Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
RA- 1
Low voltage remote high level audio/ visual annunciator in NEMA 4X enclosure.

Each 240.00 Dash number denotes number of tanks. ( RA- 1 means one tank, one light, etc.) RA- 2
Low voltage remote high level audio/ visual annunciator in NEMA 4X enclosure.

Each 263. 75 Dash number denotes number of tanks. ( RA- 1 means one tank, one light, etc.) RA-3
Low voltage remote high level audio/ visual annunciator in NEMA 4X enclosure.

Each 290.00 Dash number denotes number of tanks. ( RA- 1 means one tank, one light, etc.) RA- 4
Low voltage remote high level audio/ visual annunciator in NEMA 4X enclosure.

Each 315.00
Dash number denotes number of tanks. ( RA- 1 means one tank, one light etc.) high- RA- 1- NYS
Low voltage remote high level audio/ visual annunciator. NYS model has highEach 466.25 intensity strobe and high decibel horn.

OFAS- AL 18" x24" yellow aluminum fill alarm sign with black 2" print Each 373. 75

UNIVERSAL REMOTE ANNUNCIATORS
Single channel audio visual remote annunciator in NEMA 4X enclosure with one RA- LU1
red LED light, acknowledgement switch, test switch, and system detect light.

Each 828.75
Powered by 120VAC and triggered via normally open dry contact. ( can be used with non- OMNTEC controllers)
Two channel audio visual remote annunciator in NEMA 4X enclosure with( 2) RA- LU2
red LED lights, acknowledgement switch, test switch, and system detect light.

Each 1, 006.25 Powered by 120VAC and triggered via normally open dry contact. ( can be used with non- OMNTEC controllers)
Three channel audio visual remote annunciator in NEMA 4X enclosure with( 3) RA- LU3
red LED lights, acknowledgement switch, test switch, and system detect light.

Each 1, 435.00
Powered by 120VAC and triggered via normally open dry contact. ( can be used with non- OMNTEC controllers)
Four channel audio visual remote annunciator in NEMA 4X enclosure with( 4) RA- LU4
red LED lights, acknowledgement switch, test switch, and system detect light.

Each 1, 603.75 Powered by 120VAC and triggered via normally open dry contact. ( can be used with non- OMNTEC controllers)

LU- LF CONTROLLERS
Controller in NEMA 4X enclosure with system detect light, horn and LU1- LF
acknowledge switch compatible with LF series normally closed high level float Each 837.50
sensors. Number denotes amount of lights( ie. LU1- LF comes with one light, LU2- LF comes with two lights, etc.)
Controller in NEMA 4X enclosure with system detect light, horn and LU2-LF
acknowledge switch compatible with LF series normally closed high level float Each 1, 012.50
sensors. Number denotes amount of lights( ie. LW- LF comes with one light, LU2- LF comes with two lights, etc.)
IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.

PLEASE NOTE: PumpNalve controls: Available for duplex, alternating and lead lag pumps. Panels may include relay contacts for pump control and remote annunciation, disconnect switches, pump failure and running indicators, tank selector switches, hands off auto switches, motor starters, local alarm horn and lights. Please consult factory for pricing information. 46 I Tank Level Gauging January 201' • w,& '
NeeFyy
award 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Controller in NEMA 4X enclosure with system detect light, horn and LU3- LF
acknowledge switch compatible with LF series normally closed high level float Each 1, 476.25
sensors. Number denotes amount of lights( ie. LU1- LF comes with one light, LU2- LF comes with two lights, etc.)
Controller in NEMA 4X enclosure with system detect light, horn and LU4- LF
acknowledge switch compatible with LF series normally closed high level float Each 1, 645.00
sensors. Number denotes amount of lights( ie. LU1- LF comes with one light, LU2- LF comes with two lights, etc.)
61LU1 CONTROLLERS
61 LU1
Single channel audio/ visual conductivity controller capable of accepting one Each 837.50
conductivity sensor input. Type 4X enclosure standard.
61 LU2
Two channel audio/ visual conductivity controller capable of accepting two Each 1, 012.50
conductivity sensor inputs. Type 4X enclosure standard. 61LU3
Three channel audio/ visual conductivity controller capable of accepting three Each 1, 476.25
conductivity sensor inputs. Type 4X enclosure standard. 61LU4
Four channel audio/ visual conductivity controller capable of accepting four Each 1, 645.00
conductivity sensor inputs. Type 4X enclosure standard. 61 SERIES CONDUCTIVITY SENSORS( for conductive liquids such as leachate and caustic soda) 610-SS
Single point stainless steel conductivity high level sensor. 12" and 20" standard Each 567.50 lengths. Custom lengths also available.
61 OL
Two point stainless steel conductivity high/ caution level sensor. Alarm points to Each 851. 25 be specified by user.
615- 55 Stainless steel conductivity sump sensor. Each 500.00 61 WS- SS
Stainless steel conductivity sensor for the dry interstice of a double wall steel Each 548.75 tank. Comes with 25' of cable.
61 WF- SS Conductivity sensor for the dry interstice ofa double wall fiberglass tank. Tank Each 636.25 diameter must be specified.

LU- SP CONTROLLERS
Single channel audio/ visual controller capable of accepting( 1) L- 1- D low level LU1- SP1
optic sensor. Low voltage output for optional RA series remote annunciator, Each 837.50
one 1. 25 amp normally open dry contact, test push button, acknowledgement switch, and system defect light.

Two channel liquid sensing audio/ visual controller capable of accepting one L- R- 1 or L-2 series sensor for high/ low operation. Low voltage outputs standard LU2-SP1 for optional RA- Series remote audio/ visual annunciator(s). Two normally open Each 1, 012.50 relays. Test push button and acknowledge push button switches, type 4X enclosure standard.

Three channel liquid sensing audio/ visual controller capable of accepting one L-R- 1 or one L-2- series sensor for high/ low operation and one nonLU3- SP1 distinguishing optic sensor. Low voltage outputs standard for optional Each 1, 476.25 RA- series remote audio/ visual annunciator(s). Three normally open relays. Test push button switches, type 4x enclosure standard.

IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.
47 I Tank Level Gauging January 20 a0"" Op+,.

R1F
uw
t-Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Four channel liquid sensing audio/ visual controller capable of accepting one L-R- 1 or one L- 2 series sensor for high/ low operation and two non LU4-SPI distinguishing optic sensors. Low voltage outputs standard for optional RA- Each 1, 645.00 Series remote audio/ visual annunciator( s). Two normally open relays. Test push button and acknowledge push button switches, type 4x enclosure standard.

Six channel liquid sensing audio/ visual controller capable of accepting one L-R- 1 or one L-2 series sensor for high/ low operation and four L-series sensors.

LU6-SP1 Low voltage outputs standard for optional RA- series remote audio/ visual Each 2,023. 75 annunciator(s). One normally open relay. Test push button and acknowledge push button switches, type 4X enclosure standard.

REMOTE RELAYS
Relay( s)- SPOT dry contact(s), rated at 120vac, 5 amps resistive. Relay(s) housed RLY- RA- 1 in a NEMA 4X enclosure. Last number denotes number of relays. Interfaces with Each 256.25 LU and LPD low voltage remote outputs.

Relay(s)- SPOT dry contact(s), rated at 120vac, 5 amps resistive. Relay( s) housed RLY- RA- 2 in a NEMA 4X enclosure. Last number denotes number of relays. Interfaces with Each 297. 50 LU and LPD low voltage remote outputs.

Relay(s)- SPOT dry contact(s), rated at 120vac, 5 amps resistive. Relay( s) housed RLY- RA- 3 in a NEMA 4X enclosure. Last number denotes number of relays. Interfaces with Each 425. 00 LU and LPD low voltage remote outputs.

Relay( s)- SPOT dry contact(s), rated at 120vac, 5 amps resistive. Relay( s) housed RLY- RA-4 in a NEMA 4X enclosure. Last number denotes number of relays. Interfaces with Each 507.50 LU and LPD low voltage remote outputs.

Relay( s)- SPDT dry contact(s), rated at 120vac, 5 amps resistive. Relay(s) housed RLY- RA-6 in a NEMA 4X enclosure. Last number denotes number of relays. Interfaces with Each 676.25 LU and LPD low voltage remote outputs.

ACCESSORIES
VC- 1 Vented 4" riser cap for use with brine filled interstice. Each 166.25 SK- 4 Silicone splice kit for sensors and MTG probes. Each 37.50 41N- CAP 4" Cap for Sensors Each 78.75
21N- CAP 2" Cap for Sensors Each 63.75
U- JBK- 1 Universal junction box kit for probes and sensors Each 128.75 AD-8- 1
Voice auto dialer for up to( 2) alarm conditions and( 4) phone numbers per Each 602.50 alarm.

EC- 4
Cable:( Minimum order 1000) Four conductor N 22 AWG with shield and drain.

Each 642.50 PVC jacketed UL- E11717.

EC- 12 Twelve conductor tt 22 AWG with shield and drain. UL-E11717.PVC jacketed Each 1, 248.75

OTHER SENSORS
BOA Battery operated high level. Includes( 1) L- 1- S or( 1) L- 1- L sensor. Each 745.00 L- 1- PVC PVC hi level optic sensor. Used in chemical applications. Each 548.75 LF- 1
Single point float sensor up to 12" with brass stem, BUNA N float, and 1/ 2" NPT.

Each 38375 Comes standard in 12" lengths. Custom lengths are available, Contact factory.

LF- 1- D( up to 72") Single point float sensor up to 72" with brass stem, BUNA N float, and 2" NPT. Each 985.00 LF- 1- SS- 12 12" hi level float sensor with stainless steel stem and floats. Each 535.00 LF- 1- SS- 20 20" hi level float sensor with stainless steel stem and floats. Each 548.75 48 I Tank Level Gauging January 20 •• aa.
a
1/4elsaj
t
Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
LF- 1- SS- D
Customer specified length hi level float sensor with stainless steel stem and Each 1342.50 floats up to 72".

LF- DWF Float sensor for double wall fiberglass tanks Each 365.00

1. 25' non distinguishing leak sensor. Designed to detect liquid in sumps or LS- ASC- 1. 25 containment areas,& interstitial space for steel double wall tanks. Additional Each 507.50 materials of construction& compounds available.

LS- ASC-.895 895' non distinguishing sensor for leak detection in small areas. Each 548.75 PVC sensor for leak detection. Used in chemical applications. Designed to

LS-ASC- PVC
detect liquid in sumps or containment areas, and interstitial space for steel Each 548.75 double wall tanks. Additional materials of construction and compounds available.

Stainless steel sensor for leak detection. Used in chemical applications.

LS-ASC- SS
Designed to detect liquid in sumps or containment areas, and interstitial space Each 548. 75 for steel double wall tanks. Additional materials of construction and compounds available.

LS-ASC- FL Non distinguishing floor containment sensor Each 550.00 Universal sump float sensor. Designed to detect liquids in piping and dispenser LSF sumps. Interfaces with most control panels. ( consult factory for compatible Each 466.25 controllers)
OWI- BF- 1
Single point ball float sensor with weight for liquid/ sediment containment areas Each 230.00 and tanks

1. 25' product distinguishing leak sensor. Designed to detect liquid in sumps or PDS- 1. 25 containment areas,& interstitial space for steel double wall tanks. Additional Each 592.50 materials of construction& compounds available.

PDS-. 895 895' product distinguishing sensor for leak detection in small areas. Each 636.25 PVC product distinguishing sensor for leak detection Used in chemical

PDS- PVC
applications. Designed to detect liquid in sumps or containment areas, and Each 592.50 interstitial space for double wall steel tanks. Additional materials of construction and compounds available.

Product distinguishing stainless steel sensor for leak detection. Used in chemical PDS- SS applications. Designed to detect liquid in sumps or containment areas, and Each 593.75 interstitial space for steel double wall tanks. Additional materials of construction and compounds available.

PDS- FL Product distinguishing floor containment sensor Each 592.50 PDWL Monitoring well sensor. ( consult factory for compatible controllers) Each 1, 240.00

US- I- PLU
PVDF, 4- 20 mA ultrasonic level probe up to 20' with 2' NPT, manual and hand Each 3,861. 25
programmer tool.

VS- 1
Sensor for monitoring hydrocarbon vapors. ( consult factory for compatible Each 548.75
controllers)
XBR Battery operated brine sensor. Includes( 1) L- R- 1 sensor. Each Contact factory.

XBR-D Battery operated dry interstitial sensor. Includes( 1) LS- ASC or LWF-* senso. Each Contact factory.

LU& LPD Spare Parts
RD- LED Red Light and assembly Each 26.25
IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.
49 Tank Level Gauging January 201. 3" 0 ,.
eau p4n
4t-ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number - Description Units MSRP
AM- LED Amber Light and assembly Each 26.25
ACK Switch Acknowledgement switch only Each 23. 75
ACK boot Boot only for acknowledgement switch Each 17.50 Power Supply Power Supply( Must Specify for which controller in description when ordering) Each 157.50 Option Board Option board( Must Specify for which controller in description when ordering) Each 211. 25 HRN- 2 Horn Board( Must Specify for which controller in description when ordering) Each 240.00 HRN- 95- 2PK Two pack of 95 decibel horns Each 53. 75
SP- 2 Surge Protector Each 396.25
LP- 1D Surge Protector for LU series sensors in Diesel applications Each 676.25 LP- 16 Surge Protector for LU series sensors in Gasoline applications Each 803. 75 LPD- 1D Surge Protector for PD series sensors in Diesel applications Each 676.25 LPD- 1G Surge Protector for PD series sensors in Gasoline applications Each 803. 75 Labels Labels for LU and LPD Each 16.25
CG- 75X25 75' X. 25' cord grip for sensors Each 26.25
TEST SWITCH Test switch for LU and LPD controllers( includes boot) Each 35.00 BACKPLATE- L1 PD2 Back plate for Ll PD2. All boards and power supply included on panel. Each 1, 261. 25 BACKPLATE- L2PD4 Back plate for L2PD4. All boards and power supply included on panel. Each 1, 495.00 BACKPLATE- L3PD6 Back plate for L3PD6. All boards and power supply included on panel. Each 1, 931. 25 BACKPLATE- LU1 Back plate for LW. All boards and power supply included on panel. Each 451. 25 BACKPLATE- LU2 Back plate for LU2. All boards and power supply included on panel. Each 566.25 BACKPLATE- LU3 Back plate for LU3. All boards and power supply included on panel. Each 750.00 BACKPLATE- LU4 Back plate for LU4. All boards and power supply included on panel. Each 905.00 BACKPLATE- LU6 Back plate for LU6. All boards and power supply included on panel. Each 1, 016.25 BACKPLATE- LU9 Back plate for LU9. All boards and power supply included on panel. Each 1, 291. 25 RLY- RA-SPARE Relay module Each 128.75
FUSE Fuse- 3/ 4A Each 12.50
LU1- LU3 ZENER Zener barrier for LU1, LU2, and LU3 controllers Each 162.50 LU4-LU6 ZENER Zener barrier for LU4 and LU6 controllers Each 181. 25 PD ZENER Zener barrier for L1 PD2, L2PD4, and L2PD6 controllers Each 260.00 HOF-A- L48 Quick release latch kit, includes( 2) latches Each 63.75 MOUNTING TABS Mounting tabs for LU and LPD controllers, set of(4) Each 63.75 OEL800011 Spare Parts List( PROTEUS upgrade recommended) MB-8T44LS Main motherboard for OEL800011 Each Contact factory. 440-DSP 4X40 character LCD display for OEL800011 Each 146.25 PS- 102 New front door with thermal printer for OEL800011( with cables& LCD display) Each Contact factory.

PS- 102- CORE PS- 102 core charge. Credit to be issued when PS- 102 in field is returned. Each Contact factory.

DPU- 6PK i
Six pack of thermal paper for PS- 101, PS- 102, or PS- 103 Each 62.50 DPU- 50 Case of thermal paper for PS- 101, PS- 102, or PS- 103( includes 50 rolls of paper) Each 250.00 50 I Tank Level Gauging January 201 .- elDos
kw,
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
8P- MTGC- OEL800011 8 Pin Connector for MTG probes Each 16.25 4P- SC-OEL800011 4 Pin connector for sensors Each 13. 75 PS- 506OHZ-OELII Power supply for OEL800011 Each 441. 25 Keys- OELII Keys for OEL800011( Set of two) Each 27. 50 PS- 102- NP New front door assembly with keypad and no printer( with cables& LCD display) Each 871. 25 OELSP1 85 Decibel horn for OEL800011 Each 28. 75
OELSP3 White Ribbon Cable from motherboard to front panel( pair) Each 28.75 OELSP4 Cable from power supply to motherboard Each 28.75 OELSPS Red, Black orange, and Green cable assembly from motherboard to front panel Each 37. 50 OELSP6 Front Panel board( No Printer) Each 75.00
OELSP7 Cable for RS- 232 Com3 port( Female) Each 33.75
OELSP8 Cable for RS- 232 Com2 port( Male) Each 33.75
OELSP9 2 pack of batteries for OEL800011 motherboard Each 26.25 OELSP10 Power connector bracket/ on off switch Each 57.50 OELSP11 AC Power connector Each 11. 25
OELSP12 Gray 12 pin connector for IB- RB- 2 Each 16.25
OELSP13 Green 12 pin connector for IB- RAS Each 16.25
OELSP16 Gray ribbon cable from front panel to LCD Each 28.75 OELSP19 Half duplex RS- 485 cable for Modbus Each 116.25 OELSP22
OEL test probe. Includes float kit with? SS floats, 6' yellow cable, spacer Each 686.25 brackets, cathodic boot, white clips, and 8 position connector.

OVERLAY-OELII • Keypad overlay for OEL800011( No printer) Each 211. 25 OVERLAY-C- OELII Keypad overlay for OEL80001I with cutout for printer Each 211. 25 SP- 2 Surge Protector for OEL80001I controller Each 396.25

UPS- OELII
Uninterruptible Power supply with 2.4 minute run time at full load, 13.9 minutes Each 930.00 at half load, 120V 50/ 60 HZ
Keylock-OELII Keylock Assembly Each 78.75
OEL800011ENCBASE OEL80001I enclosure base Each 323.75
AP18 Printer dowel for PS- 102 Each 17.50
OEL800011 Repairs
F1 F2REPLACE Replacing Fl and/ or F2 fuses Contact factory.

L3REPLACE Replacing L3 inductor Contact factory.

FIRMWARE UPGRADE Latest 7. 0 firmware upgrade for OEL800011 Contact factory.

U1 3. 15 download chip( may be required for firmware upgrade) Contact factory.

CHIP EXTRACTOR Chip extractor used for removing I. C. components Contact factory.

PMB Programming fee for replacement mother board( must supply serial number Contact factory. from existing controller)
PMB- MOD Programming fee for replacement motherboard with Modbus( must supply Contact factory. serial number from existing controller) 51 1
Tank Level Gauging January 201: w"`°°"°°,.
tilsl
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
MTG Probe Spare Parts List
YCBL6- MTG 6' Yellow Communication cable for MTG probes Each 103. 75 YCBL25- MTG 25' Yellow Communication cable for MTG probes Each 363. 75 YCBL690- MTG 90 degree angle 6' yellow cable for MTG probes Each 195.00 CG- 75X45 75" X. 45" cord grip with. 45" inner diameter for MTG probes Each 26.25 White Clips White clip and adaptor for MTG probes Each 21. 25 Cathodic boot Cathodic boot for MTG probes Each 27. 50
BFK- 85
Gas float kit for probes. Includes 4" BUNA floats, 6' yellow cable, spacers, 4' cap, Each 525.00 SK- 4( sealing kit), white clips, and cathodic boot.

BFK-95
Diesel float kit for probes. Includes 4" BUNA floats, 6' yellow cable, spacers, 4" cap, Each 525.00 SK- 4( sealing kit), white clips, and cathodic boot.

OELSP18 4" Spacer kit for MTG probes Each 45.00
MTG- LP- 1 D Line surge protector for MTG probes Each 803.75 BX Series Sensor Spare Parts List
CG- 75X25 75" X. 25" cord grip for BX series sensors Each 26.25 BX- LP- 1 D Surge Protector for BX series sensors in Diesel applications Each 676.25 BX- LP- 1G Surge Protector for BX series sensors in Gasoline applications Each 803.75 PROTEUS 0E8000111 Spare Parts List
AD00001 MCU board PROTEUS- K/ X Each 678.75
AD00002 MTG board 4 probes 16 sensors Each 971. 25
AD00008 MTG board 8 probes only Each 961. 25
AD00005 Power supply for PROTEUS- B/ K/ X Each 522.50
AD00007 7" display and bezel for PROTEUS- B, PROTEUS- K and PROTEUS- X Each 820.00 AD00019 PROTEUS- B enclosure cover with display Each 835.00 AD00006P PROTEUS- K/ X enclosure cover with display and printer Each 2,972.50 AD0006NP PROTEUS- K/ X enclosure cover with display Each 1, 983.75 100338 Printer for PROTEUS- K/ X( PS- 103) Each 1, 016.25 DP00035 Printer shield for PS- 103. Required if adding printer to existing K/ X. Each 27.50 DPU-6PK Six pack of thermal paper for PS- 101, PS- 102, or PS- 103 Each 62.50 DPU-50 Case of thermal paper for PS- 101, P5- 102, or PS- 103( includes 50 rolls of paper) Each 250.00 100002 2 pack batteries for PROTEUS- K/ X MCU board( OELSP9) Each 26.25 AD00027 PROTEUS- B RS- 232 cable Each 40.00
AD00062 PROTEUS- B 12 volt power cable Each 25.00
AD00012 PROTEUS- K MCU to MTG board cable. PROTEUS- B display to MTG board cable. Each 25.00 AD00009 PROTEUS- K printer to MCU cable. Each 40.00
AD00010 PROTEUS- K printer power cable Each 40.00
AD00011 PROTEUS- K MCU power cable Each 25.00
AD00013 PROTEUS- K MCU to display cable Each 25.00
AD00016 XC- R8 external relay box replacement board Each 908.75 100355 12 pin 34 and J5 female connector Each 16.25
52 I Tank Level Gauging January 20 -+ wro4
V.111
r ‘
4 1
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
AD00071 RS- 485 board for Mini-Me, Delivery Defender, and Delivery Defender Lite Each 322. 50 PROTEUS OEL8000111 Upgrades/ Repairs
PMB Programming fee for replacement mother board( must supply serial number Each 265.00 from existing controller)
PMB- MOD Programming fee for replacement motherboard with Modbus( must supply Each 363. 75 serial number from existing controller) DC-TX- D1- 53
FillCheck' Transmitter, 53 Style, CSA Intrinsically Safe( Class I Div.1 Groups C D), Each 2, 588.00 includes mast and battery
DC-TXD1FillCheck'Transmitter, 52 Style, CSA Intrinsically Safe( Class I Div.1 Groups C D), Each 2, 588.00 includes mast and battery

FI- TX-PF
PFCheck" Portable Overfill Transmitter( with Integrated Dual Level Switch with Each 4, 194.67 6° spacing enclosed in SS Protective Housing with cam- lock fitting) Single channel audio visual remote annunciator with acknowledgement switch, RA- LU 1 test switch and system detect light powered by 120V and triggered via dry Each 884.00 contacts
Two channel audio visual remote annunciator with acknowledgement switch, RA- LU2 test switch and system detect light powered by 120V and triggered via dry Each 1, 073.33 contacts
Three channel audio visual remote annunciator with acknowledgement switch, RA- LU3 test switch and system detect light powered by 120V and triggered via dry Each 1, 530.67 contacts
Four channel audio visual remote annunciator with acknowledgement switch, RA- LU4 test switch and system detect light powered by 120V and triggered via dry Each 1, 710.67 contacts
DC-TX- D1- M- 53
FillCheck• Transmitter, 53 Style, CSA Intrinsically Safe( Class I Div.1 Groups C D) Each 1, 405.33
MODULE), no mast or battery included
DC-TX- D1- M
FillCheck• Transmitter, 52 Style, CSA Intrinsically Safe( Class I Div. 1 Groups C D) Each 1, 405.33 MODULE), no mast or battery included
MAST- FC FillCheck' Mast Housing for Fillcheck Each 944.00

LEVEL SENSORS
Single Level Float Switches for Fixed Roof Tanks Only

FI- NM- MONO-D
MonoCheck"' Single Level 2" Float Switch w/ MagLift"' Checking Mechanism, Each 2, 158.67
up to 96" Long, NO, All SS, Delrin J- Box, with mounting bracket Dual Level Float switches for Fixed RoofTanks Only

FI- NM- DC- D
DuoCheck"' Dual Level( Hi& Hi- Hi) 2' Float Switch w/MagLift'" Checking Each 2,660.00 Mechanism, up to 6' Long, All SS, Delrin J- Box with mounting bracket Dual Level Float Switches for Internal Floating Roof Tanks Only( Can Also be used in certain fixed RoofTanks) FI- NM-V2- M- 160'
VersaLevel- 02-Adjustable"' Dual Level( Hi& HiHi), 2' Float, w/ MagLift'" Checking Each 3,414.67 Mechanism, 160' Long, All S5, Metal J- Box, with mounting bracket Level Switches for External Floating RoofTanks Only( Can also be used in other applications) 8160102FP VersaLevel- X1m' Single Level 3.5' Switch, 70' Long, All SS Each 2,309.33 Controllers, Receivers, and Repeaters for FuelCheck• or DataCheck" OEL800011P-W
Tank gauging controller with 4- line by 40 character display and printer, Each 6,081. 33
to DataCheck Serial Receiver with volumetric tank data& alarm capability 53 Tank Level Gauging January 20 p"'' Oa.

R/
g'
a- 6.
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
Tank gauging controller with 4-line by 40 character display, connects to OEL800011-W DataCheck Serial Receiver with volumetric tank data& alarm capability. Each 5,052.00

WITHOUT PRINTER)
DC- RX- SR- 0-53
Serial Receiver, S3 Style, Outdoor in NEMA-4X Enclosure, 5' fiberg lass mounting Each 2, 578.67 mast and Serial Cable included( 50' maximum cable length)

DC- RX- SR- O
Serial Receiver, S2 Style, Outdoor in NEMA-4X Enclosure, 5' fiberglass mounting Each 2,578.67 mast and Serial Cable included( 50' maximum cable length) DC- RX- CGB- 53 DataChecke" wireless connector/ consolidator Each 1, 092.00 DC- RP- 12-53
Repeater, S3 Style, with 12 Hr.Backup Battery, NEMA- 4X Non- Metallic Enclosure, Each 3, 061. 33 5' fiberglass mounting mast
DC- RP- 12
Repeater, S2 Style, with 12 Hr. Backup Battery, NEMA-4X Non-Metallic Enclosure, Each 3, 061. 33 5' fiberglass mounting mast
WRRAS- 1 Wireless remote unit for RAS Series remote up to four tanks( node) Each 1, 790.67 WBRAS- 1 Wireless base a nit for RAS Series remote up to four tanks( gateway) Each 1, 790.67 IB- 12V Interface board 12VDC low voltage output board Each 317. 33 RAS- 1
Single channel audio visual remote annunciator for overfill housed in NEMA 4X Each 362.67
enclosure with acknowledgement switch
RAS- 2
Two channel audio visual remote annunciator for overfill housed in NEMA 4X Each 406.67
enclosure with acknowledgement switch
RAS- 3
Three channel audio visual remote annunciator for overfill housed in NEMA 4X Each 453.33
enclosure with acknowledgement switch
RAS-4
Four channel audio visual remote annunciator for overfill housed in NEMA 4X Each 533.33
enclosure with acknowledgement switch
RAS- 5
Five channel audio visual remote annunciator for overfill housed in NEMA 4X Each 678.67
enclosure with acknowledgement switch
RAS- 6
Six channel audio visual remote annunciator for overfill housed in NEMA 4X Each 794.67
enclosure with acknowledgement switch
FuelCheck• Fiberoptic Process Refractometer for Product Pipeline Interface Detection Fiberoptic Cable, Connectors, and Mating Sleeves* FU- CT- 1I FuelCheck• Controller, 1 Channel, 24VDC Power, 4- 20 mA Output Each 12,994.67 FU- CT- 21 FuelCheck• Controller, 2 Channel, 24VDC Power, 4- 20 mA Output Each 18,400.00 FU- CT-31 FuelCheck• Controller,3 Channel, 24 VDC Power, 4- 20 mA Output Each 23,421. 33 FU- PR- 24
FuelCheck• Probe, 24', Process Insertion Fitting, Low Pressure Insertion Tool, Each 4,636.00 Junction Box, Connectors( 300 PSI or less) FU- PR- HP FuelCheck• High Pressure Probe Insertion Tool for FU- PR- 24( 300PSI- 1200PSI) Each 6,286.67 FU- C2- DB Fiberoptic Interconnect 2 Fiber Direct Burial Cable-Armored Contact factory.

FU- FO- CN Fiberoptic Connectors Each 29.33
FU- FO- MS Fiberoptic Mating Sleeves Each 8.00
DataStik"' Series 7255/ 7255V/ 7255VB 55 Continuous, Wireless, Battery Powered Level Gauging DataStik"' Series 7255 SS construction, 108" Overall length, includes transmitter, DS- 15- 108 mast, batteries, yellow cable, cathodic boot, foot and adaptor and SK- 4 splice kit Each 5,012.00 must order float separately***
DataStik"' Series 7255 SS construction, 132" Overall length, includes transmitter, DS- 15- 132 mast, batteries, yellow cable, cathodic boot, foot and adaptor and SK-4 splice kit Each 5,056.00 must order float separately***
00,
54 Tank Level Gauging January 20 0a0
auv e1
t.Ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description - Units MSRP
DataStik'" Series 7255 SS construction, 156" Overall length, includes transmitter, DS- 15- 144 mast, batteries, yellow cable, cathodic boot, foot and adaptor and SK-4 splice kit Each 5, 113. 33 must order float separately***
DataStik"' Series 7255 5S construction, 168" overall length, includes transmitter, DS- 1 S- 168 mast, batteries, yellow cable, cathodic boot, foot and adaptor and SK-4 splice kit Each 5,928.00 must order float separately***
DS- 1S-XXX Other lengths available. Consult factory for pricing Each Contact factory.

DS- 1K- 192V
DataStik"' Series 7255V PVDF construction, 192" overall length, includes Each 5, 730.67
transmitter, mast, and batteries *** must order floats and weight separately"' DS- 1 K- 240V
DataStik" Series 7255V PVDF construction, 240" overall length, includes Each 5, 948.00 transmitter, mast, and batteries *** must order floats and weight separately**" DS- 1 K- 360V
DataStik"' Series 7255V PVDF construction, 360' overall length, includes Each 6,968.00 transmitter, mast, and batteries *'* must order floats and weight separately*** DS- 1K-480V
DataStikTM Series 7255V PVDF construction, 480' overall length, includes Each 8,712.00 transmitter, mast, and batteries *** must order floats and weight separately*** DS- 1 K-600V
DataStikTM Series 7255V PVDF construction, 600" overall length, includes Each 10,652.00 transmitter, mast, and batteries *** must order floats and weight separately*** DS- IK-XXXV Other Lengths Available Each Contact factory.

DataStik"" Series 7255VB flexible PVDF construction, includes transmitter, mast, DS- 2K- XXXVB and batteries, bottom up probe for low water detection available upon request. Each Contact factory.

Please consult factory for pricing. ( Must order floats and weight separately) Float Options for DataStik"' Series 7255( All models)
SSF- 1- 2 Single 316 Stainless Steel Product Float, 1. 83" diameter Each 182.67 SSF- 2 Dual 316 Stainless Steel product/ water float, 1. 83" diameter Each 362.67 SSF- 1- 4 Single 316 Stainless Steel Product Float, 3.85" diameter Each 260.00 SSF- 4 Dual 316 Stainless Steel Product Float, 3. 85" diameter Each 516.00 SSF- 1- 2- VB 2" Stainless Steel Product Float for low product detection applications Each 273.33 SSF- 1- 2W-VB
2' Stainless Steel Water Float for low water detection applications( specify Each 273.33 product)
BNF- 1- 4 Single Buna N Product Float, 3.85" diameter Each 126.67 BNF- 4 Dual Buna N product/water floats 3.85" diameter Each 245.33 SFS Stainless steel float spacer required on probe lengths 288' or greater Each 57.33 Weights for DS- 1 K and DS- 2K series flexible probes
W2- 144 2' diameter X 5' long stainless steel weight for probes up to 144' overall length Each 317.33 W2- 288 2" diameter X 7' long stainless steel weight for probes up to 288' overall length Each 362.67 W2-432 2" diameter X 11' long stainless steel weight for probes up to 432' overall length Each 541. 33 W2- 600 2' diameter X 14" long stainless steel weight for probes up to 600' overall length Each 585.33 W2- 720 2' diameter X 16' long stainless steel weight for probes up to 720" overall length Each 857.33 W2- 840 2" diameter X 18" long stainless steel weight for probes up to 840' overall length Each 1, 122.67 IMPORTANT: Signed dimension approval sheet is required to start production on any custom length items. Once signed dimension approval sheet is received by factory, order cannot be canceled on this item. Final pricing will be determined upon receipt of dimension approval sheet.
55 I Tank Level Gauging January 2019 p°
ward 2019
Tank Level Gauging - Omntec Product Price List
Part Number Description Units MSRP
W6-VBH

5. 75"( dia.) X 7'( H) hollowed out weight for fixed bottom probes for low water Each 1, 565. 33 detection
Accessories
FI- BA- I5- B1 FiIlCheck• Battery for DC-TX- D1 Transmitter( single red) Each 133. 33 FI- BA- IS- 82 FillCheck• Battery for DC-TX-01 Transmitter( single black) Each 133. 33 DC-TX- 53- 55- M
DataCheck'" serial transmitter,S3 Style, for series DataStik" probes( batteries not Each 2, 462.67 included)
MAST-FC Mast housing for FillCheck• Each 944.00
MAST-DC Mast housing for DataCheck' Each 944.00
YCBL6- MTG-420 6' yellow lead cable for MTG-420 probe or wireless rigid Each 197.33 DSTP7255 DataStik'" test probe Each 812.00
USB7255 DataStikTM USB interface module for probe diagnosis Each 721. 33 DSTPK
DataStikTM transmitter programming kit includes CD with software, DB9 female Each 541. 33 to 10 pin female, and USB to serial converter.

DSPDK
DataStikTM
programming and diagnostic kit. Includes DSTPK, DSTP7255 and Each 1, 610.67 USB7255.

DC-TX- DI- M FiIlCheck• transmitter module Each 1, 405.33 OMN-PC- W OMNTEC remote monitoring PC software for wireless systems( up to 8 tanks) Each 900.00 U- JBK- 1 Universal junction box kit for probes and sensors Each 137.33

CONDITIONS OF SALE
ATG products are to be installed according to current installation instructions of Manufacturer. Local and National codes may also apply and must be consulted by buyer.The proper handling, installation and care of these products are the sole responsibility of the purchaser and any loss or damage resulting from improper installation, handling or care shall not be the responsibility of EJ. Ward Inc. 56 Tank Level Gauging January 20 r"
jp°Np"
y
tWard

CONTACT WARD
Ward' s mission is to provide industry leading technical support by ensuring all issues are promptly and wholly resolved. You can speak with a highly skilled Technical Support Specialist between 8am- 5pm Central Time, Monday through Friday. If you contact Ward during non business hours, a Specialist will return your call the following business day.

Contact Ward for questions related to:

Installation of new hardware or software
Troubleshooting malfunctions
Ordering new or replacement hardware
Phone 210. 824.7383
800.580WARD( 9273)
Fax 210.824.2031
Email [email protected]
orders@eiward. com
[email protected]
Web www.ejward.com
57 I Contact Ward a"°°
u,
41:
i
eek
Fyµ
4ftdWard
7 Telematics and Fuel Control
CANceiverTM DISCLAIMER
By definition, the E.J. Ward, Inc.(Ward), CANceiver is an automotive telematics product used in commercial fleets to control fueling and collect vehicle and driver behavior data. CANceiver models are designed for specific OEM vehicle OBDII networks to include light, medium, and heavy duty applications.

CANceiver selection assistance is provided as a service to our customers to aid in the proper selection and ordering of OBDII and other Ward telematics devices. Ward endeavors to maintain an accurate and current listing of the most common fleet vehicles and its compatible devices; this list DOES NOT take into consideration customization, modification by customer, or 3rd party hardware that is plugged into, or co- habituates on the OBDII or vehicle ECM network
The products compatibility IS NOT inclusive ofevery vehicle manufacturer, make or model or year.

The design ofthe CANceiver was based upon automotive electronic industry practices set forth by the Society of Automotive Engineers( SAE) and International Organization for Standardization( ISO). Specific standards used in compliance with these practices were: SAE J1587; SAE J1708; SAE J1850; SAE J1939; SAE J1962; SAE J1978; SAE J2284; ISO 7498; ISO 11898; and ISO 15765. Ward adheres to the Open Systems Interconnection Basic Reference Model( OSI). The devices functions are confined within the OSI reference model which is the design basis for hardware and software components at all the major OEM automotive manufacturers.

CANceiver operations are restricted and do not interfere or modify any OEM vehicle functions.

As industry standards, technology advancements are made, vehicle OEMs and 3rd-party up- fitters frequently and without notice modify or change parameters within the embedded code on the on- board computers and Electronic Control Modules( ECM). They may also modify the vehicle filler neck configuration, therefore affecting the recommended antenna or EM-Tag placement. Ward has no control over these changes, if a vehicle device fails to perform or collect data as expected, we will work with our customers to resolve the issue. Ward cannot guarantee time to resolution when OEM changes occur.

Ward products must be installed and maintained in accordance with our specified installation procedures and by a trained, certified technician or installer. Failure to follow Ward's installation procedures shall void the Warranty.

Should a recommended Ward product not work as intended, Ward will replace the product only. Ward is not responsible for re- installation or labor charges associated with improper device installation or selection.

At this time, Ward has not certified any other fuel management company's technology, vehicle installed devices OBDII or otherwise, global positioning systems( GPS) other than those offered directly by Ward or its authorized agents to be installed in conjunction with or plugged into the vehicle Engine Control Module( ECM) port( e. g. OBD II etc.) in series or parallel with the CANceiver. Only Ward supplied devices are certified to operate simultaneously with the Ward fuel management system or CANceiver while plugged into the vehicle ECM/ OBDII port.

Installing non-certified devices may affect operation of the Ward AFMS, the CANceiver, as well as have a potential negative effect on vehicle functionality.

Ward offers a toll free phone number 1. 800. 580.Ward( 9273) for product selection, technical support or installation questions.
10 I CANceiver Disclaimer January 2019 e`°°"°1/2
4ee--
Ward
Telematics and Fuel Control

ENVIRONMENTAL POLICY
Introduction
Ward is committed to the implementation of progressive environmental practices as a matter of corporate and design philosophy. Environmental efforts focus on two fundamental areas: business practices and product design.

Our efforts as a" good corporate citizen" align with ISO 14001, the internationally recognized environmental management standard which ensures that every environmental impact stemming from business practices has been identified and that initiatives have been put in place to reduce those impacts.

Environmental Policy
Our Environmental Policy demonstrates Ward' s commitment to:

Compliance with relevant environmental laws and regulations Prevention of pollution
Continual Improvement of our environmental performance
Management directs the effective implementation of this policy through:

Communication to all employees, visitors and contractors Employee participation
Goals and targets
We make every reasonable effort to put these practices in place because we believe it's the right thing to do.

Regards,
Pereca--7—
E. Kettyle
Executive Vice President
[email protected]
uIt
N1 /
Client#: 150916 EJWAR

ACORDTM CERTIFICATE OF LIABILITY INSURANCE

DATE( MMIDDIYYYY)
8/ 2912018
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS

CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

IMPORTANT: If the certificate holder Is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed.

If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer any rights to the certificate holder in lieu of such endorsement( s).

PRODUCER kap.. Lori Lynd
USI Insurance Services LLC- CL PHONE FAX

E- MAIL
Ea). 210- 524-2055 ac, No): 484-652-5441
7550 IH- 10 West, Suite 700 ADDRESS: I ori.lynd@us i. com San Antonio, TX 78229
210366. 0671
INSURER(S) AFFORDING COVERAGE NAIL•
INSURER A: Mantic Specially Insurance company 27154

INSURED INSURER B
E. J. Ward, Inc.

INSURER C:
8801 Tradeway
San Antonio, TX 78217
INSURER D:

INSURER E:

INSURER F:

COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

INSR

TYPE OF INSURANCE LTRINSR

ADDLSUBR' POLICY EFF POLICY EXP

WVD POLICY NUMBER MMIDOIYYYY) ( MMIDDIYYYY) LIMITS
A X
COMMERCIAL GENERAL LIABILITY X X 7110163580000 09/ 01/ 201809/01/ 2019EEACH OCCURRENCE 1, 000,000 CLAIMS- MADE X OCCUR PR EMISES( EeEaccanence) $ 500,000 MED EXP( Any one person) $ 10, 000
PERSONAL 8 ADV INJURY $ 1, 000,000
GEN' L AGGREGATE LIMIT APPLIES PER: GENERAL AGGREGATE $ 2, 000,000 _ POLICY X Ei LOC PRODUCTS- COMP/ OPAGG $ 2, 000,000 _
OTHER:

A AUTOMOBILE LIABILITY X X 7110163580000 09/ 01/ 2018 09/01/ 2010 INGLELIMIT $ 1, 000,000 X ANY AUTO BODILY INJURY( Par person) $

OWNED SCHEDULED
AUTOS ONLY BODILY INJURYJ ( N Per accident) $ AUTOS

X AUTOS ONLY X

NON- OWNED PROPERTY DAMAGE
AUTOS ONLY Per accident)
A x
UMBRELLA LIAR X OCCUR 7110163580000 09/ 01/ 2018 09/01/ 2019 EACH OCCURRENCE 10,000, 000 EXCESS LIAB CLAIMS- MADE AGGREGATE 10 000,000
DEO X RETENTION$ 10000
A
WORKERS COMPENSATION X 4060454430000 09/ 01/ 2018 09/ 01/ 2019 X PER 07H
AND EMPLOYERS' LIABILITY yIN

STATUTE FR
ANY PROPRIETOR/PARTNER/EXECUTIVE E. L. EACH ACCIDENT 1, 000,000 OFFICER/MEMBER EXCLUDED? N N I A Mandatory In NH) E. L. DISEASE- EA EMPLOYEE $ 1, 000,000 If yes. describe under
DESCRIPTION OF OPERATIONS below E. L. DISEASE- POLICY LIMIT $ 1, 000,000 A Professional Liab X 760010450000 09/01/ 2018 09/ 01/ 2019 3,000, 000 Aggregate 3,000,000 Each Claim
DESCRIPTION OF OPERATIONS I LOCATIONS I VEHICLES( ACORD 101, Additional Remarks Schedule, may be attached It more space Is required) The City of Redondo Beach, its officers, elected and appointed officials, employees, and volunteers are named as Additional Insureds as respects to the General Liability and Automobile Liability as required by written contract.

Coverage is Primary and Non-Contributory.
30 days notice will be provided to the Certificate Holder in the event of cancellation.

CERTIFICATE HOLDER CANCELLATION
City of Redondo Beach SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE

THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN Attn: Rob Osborne ACCORDANCE WITH THE POLICY PROVISIONS. 531 N Gertrude Ave
Redondo Beach, CA 90277 AUTHORIZED REPRESENTATIVE
la
1988-2015 ACORD CORPORATION. All rights reserved.

ACORD 25( 2016103) 1 of 1 The ACORD name and logo are registered marks of ACORD S23766298/ M23762798 AKNZP
This page has been left blank intentionally.

THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY.

TEXAS @VANTAGE FOR GENERAL LIABILITY

TECHNOLOGY COMPANIES
This endorsement modifies insurance provided under the following:

COMMERCIAL GENERAL LIABILITY COVERAGE FORM
The following schedule lists the coverage extensions provided by this endorsement. Refer to the individual provisions to determine the extent of your coverage.

SCHEDULE OF COVERAGE EXTENSIONS

1. Additional Insured— Broad Form Vendors 8. Coverage Territory—Worldwide

2. Additional Insured— by Contract, Agreement or 9. Duties in Event of Occurrence, Claim or Suit Permit relating to: 10. Expected or Intended Injury( PD) o Work performed by you 11. Medical Payments
o Premises you own, rent, lease or occupy 12. Newly Acquired or Formed Organizations o Equipment you lease 13. Non-Owned Watercraft

3. Aggregate Limit Per Location 14. Personal and Advertising Injury

4. Blanket Waiver of Subrogation 15. Product Recall Expense

5. Bodily Injury Redefined— Mental Anguish 16. Supplementary Payments Increased Limits

6. Broadened Named Insured

7. Broadened Property Damage
o Borrowed Equipment
o Customers' Goods
o Use of Elevators

1. ADDITIONAL INSURED— BROAD FORM VENDORS
Section II— Who Is An Insured is amended to include as an additional insured any person( s) or organization( s) referred to below as vendor) with whom you agreed in a written contract or agreement to provide insurance. but only with respect to " bodily injury" or" property damage" arising out of" your products" which are distributed or sold in the regular course of the vendor's business, subject to the following additional exclusions:
a. This provision 1. does not apply to:
1) " Bodily injury" or" property damage" for which the vendor is obligated to pay damages by reason of the assumption of liability in a contract or agreement. This exclusion does not apply to liability for damages that the vendor would have in the absence of the contract or agreement; 2) Any express warranty unauthorized by you;
3) Any physical or chemical change in the product made intentionally by the vendor; 4) Repackaging, except when unpacked solely for the purpose of inspection, demonstration, testing or the substitution of parts under instructions from the manufacturer, and then repackaged in the original container;
5) Any failure to make such inspections, adjustments, tests or servicing as the vendor has agreed to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products;
6) Demonstration, installation, servicing or repair operations, except such operations performed at the vendor's premises in connection with the sale of the product; 7) Products which, after distribution or sale by you, have been labeled or relabeled or used as a container, part or ingredient of any other thing or substance by or for the vendor; or 8) " Bodily injury" or" property damage" arising out of the sole negligence of the vendor for its own acts or omissions or those of its employees or anyone else acting on its behalf. However, this exclusion does not apply to:
a) The exceptions contained in Subparagraphs 4. or 6.; or VCG 747 TX 06 07 Includes copyrighted material of Insurance Services Office. Inc. Page 1 of 7 Copyright 2007. p, iimmnmuumymmglmm„ m
b) Such inspections, adjustments, tests or servicing as the vendor has agreed to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products.
9) Any person or organization if the " products-completed operations hazard" is excluded either by the provisions of the Coverage Form or by endorsement.
b. This insurance does not apply to any insured person or organization, from whom you have acquired such products, or any ingredient, part or container, entering into, accompanying or containing such products.

2. ADDITIONAL INSURED— CONTRACT, AGREEMENT OR PERMIT
a. Section II — Who Is An Insured is amended to include as an additional insured any person( s) or organization( s) with whom you agreed in a written contract, written agreement or permit to provide insurance such as is afforded under this Coverage Part, but only with respect to liability for "bodily injury", property damage" or " personal and advertising injury" caused, in whole or in part, by your acts or omissions or the acts or omissions of those acting on your behalf:

1. In the performance of" your work" for the additional insured( s) at the location designated in the contract, agreement or permit; or

2. In the maintenance, operation or use of equipment leased to you by such person( s) or organization( s), or

3. In connection with premises you own, rent, lease or occupy.

This insurance applies on a primary or primary and non- contributory basis if that is required in writing by the contract, agreement or permit.
b. The insurance provided to the additional insured herein is limited, This insurance does not apply:

1. Unless
a) the written contract, agreement or permit is currently in effect or becomes effective during the term of this policy; and
b) the contract or agreement was executed or permit issued prior to the " bodily injury", " property damage", or" personal and advertising injury";

2. To any person or organization included as an insured under the Additional Insured - Broad Form Vendors provision of this endorsement;

3. To any person or organization included as an insured by an endorsement issued by us and made part of this Coverage Part;

4. To any person or organization if the " bodily injury", " property damage", or " personal and advertising injury" arises out of the rendering of or failure to render any professional architectural, engineering or surveying services by or for you including:
a) The preparing, approving, or failing to prepare or approve, maps, shop drawings, opinions, reports, surveys, field orders, change orders or drawings and specifications; or b) Supervisory, inspection, architectural or engineering activities.

5. To any:
a) Lessor of equipment after the equipment lease expires; or b) Owners or other interests from whom land has been leased; or c) Managers or lessors of premises if:
1) The " occurrence" takes place after you cease to be a tenant in that premises; or 2) The " bodily injury", " property damage", " personal and advertising injury" arises out of structural alterations, new construction or demolition operations performed by or on behalf of the manager or lessor.

6. To " bodily injury, or" property damage" occurring after:
a) All work on the project ( other than service, maintenance or repairs) to be performed by or on behalf of the additional insured at the site of the covered operations has been completed: or b) That portion of" your work" out of which the injury or damage arises has been put to its intended use by any person or organization other than another contractor or subcontractor engaged in performing operations for a principal as part of the same project.

Copyright 2007.' rnn ' I ' w o',"" II",
c. Limits of Insurance applicable to the additional insured are those specified in the contract, agreement or permit or in the Declarations of this policy, whichever is less, and fix the most we will pay regardless of the number of:

1. Insureds;

2. Claims made or" suits" brought; or

3. Persons or organizations making claims or bringing" suits".

These Limits of Insurance are inclusive of and not in addition to the Limits of Insurance shown in the Declarations.

3. AGGREGATE LIMIT PER LOCATION
a. Under Section III — Limits of Insurance, the General Aggregate Limit applies separately to each of your locations" owned by or rented or leased to you.
b. Under Section V— Definitions, the following definition is added:

Location" means premises involving the same or connecting lots, or premises whose connection is interrupted only by a street, roadway, waterway or right- of-way of a railroad.

4. BLANKET WAIVER OF SUBROGATION
Section IV — Transfer of Rights of Recovery Against Others to Us Condition is amended to add the following:

We will waive any right of recovery we may have against any person or organization because of payments we make for injury or damage arising out of your ongoing operations done under a written contract or agreement with that person or organization and included in " your work" or the " products- completed operations hazard".

This waiver applies only to persons or organizations with whom you have a written contract, executed prior to the "bodily injury" or" property damage", that requires you to waive your rights of recovery.

5. BODILY INJURY REDEFINED— MENTAL ANGUISH
Under Section V the definition of" bodily injury" is replaced by the following:

Bodily injury" means bodily injury, sickness, or disease sustained by a person, including mental anguish or death resulting from any of these at any time.

6. BROADENED NAMED INSURED
Section II— Who Is An Insured is amended to include as an insured the following:

Any organization which is a legally incorporated entity in which you own a financial interest of more than 50 percent of the voting stock on the effective date of this endorsement will be a Named Insured until the 180th day or the end of the policy period, whichever comes first, provided there is no other similar insurance available to that organization.

The insurance afforded herein does not apply to any entity which is also an insured under another policy or would be an insured under such policy but for its termination or the exhaustion of its limits of insurance.

7. BROADENED PROPERTY DAMAGE — BORROWED EQUIPMENT, CUSTOMERS' GOODS AND USE OF

ELEVATORS
The insurance for" property damage" liability is subject to the following:
a. The Damage To Property exclusion under Section I Coverage A is amended as follows:

1. The exclusion for personal property in the care, custody or control of the insured does not apply to property damage" to equipment you borrow while at a job site and provided it is not being used by anyone to perform operations at the time of loss.

2. The exclusions for
a) Property loaned to you;
b) Personal property in the care, custody or control of the insured; and c) That particular part of any properly that must be restored, repaired or replaced because " your work" was incorrectly performed on it
do not apply to " property damage" to " customers' goods" while on your premises nor do they apply to property damage" arising from the use of elevators at premises you own, rent, lease or occupy.

Subject to the Each Occurrence Limit, the most we will pay for " property damage" to " Customers' Goods" is$ 25,000 per" occurrence".

VCG 747 TX 06 07 Includes copyrighted material of Insurance Services Office. Inc. Page 3 of 7 Copyright 2007,
b. Under Section V— Definitions, the following definition is added:

Customers' Goods" means goods of your customer on your premises for the purpose of being:

1. Repaired; or

2. Used in your manufacturing process.
c. The insurance afforded by this provision is excess over any other valid and collectible property insurance including any deductible) available to the insured whether such insurance is primary, excess, contingent or on any other basis. Any payments by us will follow the Other Insurance — Excess provisions in the COMMERCIAL GENERAL LIABILITY CONDITIONS.

8. COVERAGE TERRITORY— WORLDWIDE
The definition of" coverage territory" is replaced by the following:

Coverage territory" means anywhere. However, the insured' s responsibility to pay damages must be determined in a settlement we agree to or in a " suit" on the merits brought within the United States of America (including its territories and possessions), Puerto Rico or Canada.

9. DUTIES IN THE EVENT OF OCCURRENCE, OFFENSE, CLAIM OR SUIT Section IV — Duties In The Event Of Occurrence, Claim or Suit is amended by adding the following paragraphs:
a. The requirements that you must

1. notify us of an" occurrence" offense, claim or" suit" and

2. send us documents concerning a claim or" suit"
apply only when such " accident" claim," suit" or" loss" is known to:

1. You, if you are an individual;

2. ' A partner, if you are a partnership;

3. An executive officer of the corporation or insurance manager, if you are a corporation; or

4. A manager, if you are a limited liability company.
b. The requirement that you must notify us as soon as practicable of an " occurrence" or an offense that may result in a claim does not apply if you report an " occurrence" to your workers compensation insurer which later develops into a liability claim for which coverage is provided by this policy. However, as soon as you have definite knowledge that the particular " occurrence" is a liability claim rather than a workers compensation claim, you must comply with the Duties In The Event Of Occurrence, Offense, Claim Or Suit Condition.

10. EXPECTED OR INTENDED INJURY( PROPERTY DAMAGE)
The Expected Or Intended Injury exclusion under Coverage A Bodily Injury and Property Damage is replaced by:

Bodily injury" or" property damage" expected or intended from the standpoint of the insured. This exclusion does not apply to" bodily injury" or" property damage" resulting from the use of reasonable force to protect persons or property.

11. MEDICAL PAYMENTS- INCREASED LIMITS AND TIME PERIOD
a. In the Insuring Agreement under Coverage C Medical Payments, the requirement that expenses are incurred and reported to us within one year of the date of the accident is changed to three years. b. The Medical Expense Limit is $ 10,000 per person or the amount shown in the Declarations as the Medical Expense Limit, whichever is greater.
c. This provision 11. does not apply if Coverage C - Medical Payments is otherwise excluded either by the provisions of the Coverage Form or by endorsement.

12. NEWLY FORMED OR ACQUIRED ORGANIZATIONS
Under Section II— Who Is An Insured, the time period limitation for newly acquired or formed organizations is replaced by:

Coverage under this provision is afforded only until the end of the current policy period.

13. NON-OWNED WATERCRAFT
a. Section II— Who Is An Insured is amended to include as an insured for any watercraft that is covered by this policy, any person who, with your expressed or implied consent, either uses or is responsible for the use of a watercraft. However, no person or organization is an insured with respect to:

Copyright 2007, n gnungmm, intim rui

1. " Bodily injury' to a co-" employee" of the person operating the watercraft; or

2. " Property damage" to property owned by, rented to. in the charge of or occupied by you or the employer of any person who is an insured under this provision. b. In the exception to the Aircraft, Auto Or Watercraft exclusion under Coverage A Bodily Injury And Property Damage Liability, the limitation on the length of a watercraft is increased to 51 feet. c. The insurance afforded by this provision 13. is excess over any other valid and collectible insurance including any deductible or Self Insured Retention) available to the insured, whether such insurance is primary, excess, contingent or on any other basis. Any payments by us will follow the Other Insurance — Excess Insurance provisions in the COMMERCIAL GENERAL LIABILITY CONDITIONS.

14. PERSONAL AND ADVERTISING INJURY
The following exclusions under the definition of" personal and advertising injury" are amended as follows:
a. Insureds In Media Type Businesses
Personal and advertising injury" committed by an insured whose business is:
1) Advertising. broadcasting, publishing or telecasting; or 2) Designing or developing content of websites for others.

However, this exclusion does not apply to paragraphs 14 a., b. and c. of" personal and advertising injury" under the Definitions Section.

For the purposes of this exclusion, the placing of frames, borders or links, or advertising, for you or others is not by itself, considered the business of advertising, broadcasting, publishing or telecasting. b. Electronic Chatrooms Or Bulletin Boards
Personal and advertising injury" arising out of an electronic chatroom or bulletin board the insured hosts, owns, or maintains for others.

15. PRODUCT RECALL EXPENSE
a. With respect to this Provision 15., the Recall Of Products, Work Or Impaired Property exclusion tinder Coverage A Bodily Injury And Property Damage Liability is deleted. b. The following is added to Section Ill- Limits Of Insurance section:

1. The Limits of Insurance shown in the Product Recall Schedule and rules below fix the most we will pay regardless of the number of
a) Insureds;
b) " Covered recalls" initiated; or
c) Number of" your products" recalled.

2. The Product Recall Aggregate Limit is the most we will reimburse you for the sum of all " product recall expenses" incurred for all " covered recalls" initiated during the policy period.

3. Subject to 2. above, the Each Product Recall Limit is the most we will reimburse you for the sum of all product recall expenses" arising out of any one" covered recall" for the same defect or deficiency.

Products Recall Schedule
Limits of Insurance
Product Recall Aggregate 50, 000
Limit
Each Product Recall Limit 25, 000
The Limits of Insurance for this coverage apply separately to each consecutive annual period and to any remaining period of less than 12 months, starting with the beginning of the policy period shown in the Declarations, unless the policy period is extended after issuance for an additional period of less than 12 months. In that case, the additional period will be deemed part of the last preceding period for the purposes of determining the Limits of Insurance.

VCG 747 TX 06 07 Includes copyrighted material of Insurance Services Office, Inc. Page 5 of 7 Copyigtd2007, npiimnn. nn„ gln1. p ," 11" 1 lnn
c. The following is added to the Duties In The Event Of Occurrence, Offense, Claim Or Suit provision under Section IV— Conditions:

You must see to it that the following are done in the event of an actual or anticipated " covered recall" that may result in " product recall expense":

1. Give us prompt notice of any discovery or notification that" your product' must be withdrawn or recalled.

Include a description of" your product" and the reason for the withdrawal or recall;

2. Cease any further release, shipment, consignment or any other method of distribution of like or similar products until it has been determined that all such products are free from defects that could be a cause of loss under this insurance;

3. As often as may be reasonably required, permit us to inspect " your product" that demonstrates the need for the" covered recall" and permit us to examine your books and records. Also permit us to take damaged and undamaged samples of " your products" for inspection, testing and analysis; and permit us to make copies from your books and records;

4. Send us a signed, sworn, proof of loss containing the information we requested to settle the claim. You must do this within 60 days after our request. We will supply you with the necessary forms; and

5. Permit us to examine any insured under oath, while not in the presence of any other insured and at such times as may reasonably be required, about any matter relating to this insurance or your claim, including an insured' s books and records. In the event of an examination, an insured' s answers must be signed.
d. The following definitions are added to the Definitions Section:

1. " Covered recall" means a recall made necessary because the insured or a government body has determined that a known or suspected defect, deficiency, inadequacy or dangerous condition in " your product" has resulted in or will result in" bodily injury" or" property damage".

2. " Product Recall Expense" means:
a) The following necessary and reasonable expenses you incur exclusively for the purpose of recalling" your product":
1) For communications, including radio or television announcements or printed advertisements including stationery, envelopes and postage;
2) For shipping the recalled products from any purchaser, distributor or user to the place or places designated by you;
3) For remuneration paid to your regular" employees" for necessary overtime; 4) For hiring additional persons, other than your regular" employees"; 5) Incurred by" employees", including transportation and accommodations; 6) To rent additional warehouse or storage space: or
7) For disposal of" your products", but only to the extent that specific methods of destruction other than those employed for trash discarding or disposal are required to avoid " bodily injury" or property damage" as a result of such disposal, but
product recall expenses" does not include costs of regaining your market share, goodwill, revenue or profit.
b) " Product Recall Expense" does not include any expenses resulting from:
1) Failure of any product to accomplish its intended purpose; 2) Breach of warranties of fitness, quality, durability or performance; 3) Loss of customer approval, or any cost incurred to regain customer approval; 4) Redistribution or replacement of " your product" which has been recalled by like products or substitutes;
5) Caprice or whim of the insured;
6) A condition likely to cause loss of which any insured knew or had reason to know at the inception of this insurance: and
7) Recall of "your products" that have no known or suspected defect solely because a known or suspected defect in another of" your products" has been found

Copyright 2007.' 11, p 111 i,,, i u
1 1,,,, 1 n, 1 m, M,,, 11, 11„ 01,", 1

16. SUPPLEMENTARY PAYMENTS— INCREASED LIMITS
In the SUPPLEMENTARY PAYMENTS— Coverages A and B provision:
a. The limit for the cost of bail bonds is amended to$ 2,500; and b. The limit for reasonable expenses incurred by the" insured" is amended to$ 500 a day.

VCG 747 TX 06 07 Includes copyrighted material of Insurance Services Office. Inc. Page 7 of 7 Copyright 2007.', nit n!'!'! woo nPI Inn ninnn
THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. @VANTAGE FOR AUTOMOBILE - TEXAS
This endorsement modifies insurance provided under the following:

BUSINESS AUTO COVERAGE FORM
The following schedule lists the coverage extensions provided by this endorsement. Refer to the individual provisions to determine the extent of your coverage.

SCHEDULE OF COVERAGE EXTENSIONS

1. Additional Insured By Contract 12. Employee Hired Autos

2. Airbag Discharge 13. Fellow Employee Exclusion

3. Auto Theft Reward 14. Glass Repair—Waiver of Deductible

4. Blanket Waiver of Subrogation 15. Hired Auto Physical Damage Coverage

5. Bodily Injury Redefined— Mental Anguish 16. Lease Gap Coverage

6. Broad Form Named Insured 17. Liability Coverage— Supplementary Payments

7. Communications Equipment 18. Newly Formed or Acquired Organizations

8. Diminution in Value 19. Physical Damage—Transportation Expenses

9. Drive Other Car— Executive Officers 20. Rental Reimbursement— Private Passenger

10. Duties In The Event of Accident, Claim, Suit or Vehicles Loss 21. Towing— Any Covered Auto

11. Employees As Insureds

1. ADDITIONAL INSURED BY CONTRACT
The Who Is An Insured provision under SECTION II — LIABILITY COVERAGE is amended to include as an additional insured any person or organization with whom you agreed in a written contract, written agreement or permit, to provide insurance such as is afforded under this Coverage Form. Such person or organization is an insured only with respect to liability for "bodily injury" or " property damage" caused, in whole or in part by your maintenance, operation or use of your covered" autos".

With respect to the insurance afforded to these additional insureds, this insurance does not apply:
a. Unless the written contract or agreement has been executed or the permit has been issued prior to the bodily injury" or" property damage";
b. To any person or organization included as an insured by endorsement or in the Declarations, or c. To any lessor of" autos" when their contract or agreement with you for such leased " auto"ends.

2. AIRBAG DISCHARGE
If you purchased physical damage coverage for a covered " auto" under this policy, we will pay to reset or replace an airbag that accidentally discharges without the vehicle being involved in an accident, No deductible applies to this additional coverage. However, this coverage only applies if the airbag is not covered under a manufacturer's warranty and you did not intentionally cause the airbag to discharge.

3. AUTO THEFT REWARD
We will pay up to a$ 2, 000 reward in the event of a covered loss, for information leading to the arrest and conviction of anyone stealing a covered " auto". A reward will not be paid to you, a family member, employee or any public official while performing their duty.

4. BLANKET WAIVER OF SUBROGATION
The Transfer Of Rights of Recovery Against Others To Us condition under SECTION IV — BUSINESS AUTO CONDITIONS, paragraph A. LOSS CONDITIONS is replaced by the following:

We will waive any right of recovery we may have against any person or organization because of payments we make for injury or damage arising out of the operation of a covered " auto" when you have assumed liability for such " bodily injury" or " property damage" under an " insured contract", provided the contract is in writing and executed prior to the" bodily injury" or" property damage".

VCA 627 TX 01 09 Includes copyrighted material of Insurance Services Office, Inc. Page 1 of 5 Copyright 2009, U!!!!! I!!! u!! I IIPn"! II' fl'' IIl ! IP'''''' II! @@@@@@@@@@0@@@@@0410@@
5, BODILY INJURY REDEFINED- MENTAL ANGUISH
The definition of" bodily injury" under SECTION V- DEFINITIONS is replaced by the following:

Bodily injury" means bodily injury, sickness, or disease sustained by a person, including mental anguish or death resulting from any of these at any time.

6. BROAD FORM NAMED INSURED
a. The Who Is An Insured provision under SECTION II- LIABILITY COVERAGE is amended to include the following:

Any organization which is a legally incorporated entity in which you own a financial interest of more than 50% of the voting stock on the effective date of this Coverage Form will be a Named Insured until the 180th day or the end of the policy period whichever come first, provided there is no other similar insurance available to that organization.
b. Paragraph a. of this provision 6. does not apply to " bodily injury" or "property damage" for which an " insured" is also an insured under any other automobile policy or would be an insured under such a policy, but for its termination or the exhaustion of its limit of insurance.

7. COMMUNICATIONS EQUIPMENT
a. The exclusion for electronic equipment under Exclusions of SECTION III - PHYSICAL DAMAGE COVERAGE does not apply to loss of any permanently installed, non-removable communications equipment designed for use as a:

1. Citizen's band radio;

2. Two-way mobile radio or telephone;

3. Scanning monitor receiver, or

4. GPS Navigation System
including its antenna and other accessories.
b. No Deductible applies to this additional coverage.
c. The most we will pay for this coverage is$ 5,000 per occurrence.

8. DIMINUTION IN VALUE
The " diminution in value" exclusion under SECTION III - PHYSICAL DAMAGE COVERAGE, B. Exclusions does not apply if the covered " auto" is a private passenger " auto" and is leased, rented, hired or borrowed without a driver for a period of 30 days or less and is used in the conduct of the insured's business. The most we will pay for" loss" arising out of an " accident" is the lesser of$ 7, 500 or 20% of the actual cash value of the auto" as determined by Kelley Blue Book or other independent valuation sources.

9. DRIVE OTHER CAR- EXECUTIVE OFFICERS
a. The Who Is An Insured provision under SECTION II - LIABILITY COVERAGE is amended to include:

If you are designated in the Declarations as:

1. An individual; you and your spouse.

2. A partnership; your partners and their spouses.

3. An organization other than an individual or a partnership; your" executive officers" and their spouses. b. SECTION II - LIABILITY COVERAGE and SECTION III - PHYSICAL DAMAGE COVERAGE are extended to include" autos" you don't own, hire, lease or borrow while in the care, custody or control of an insured listed in 9. a. This does not include any" auto":

1. Owned by any insured listed in 9. a., or any member of their household, including any such " auto" that is owned but not insured;

2. Used by an insured listed in 9. a. while working in the business of selling servicing, repairing or parking autos; or,

3. Insured under another policy of insurance.

If Medical Payments, Uninsured/ Underinsured Motorist, Personal Injury Protection or other compulsory coverages required by the governing jurisdiction are covered on this policy, then insureds listed in 9. a. above and family members residing in the same households are" insureds" while:

1. Occupying as a passenger, or

2. A pedestrian when struck by

Copyright 2009, 1!! 1'! 1! 11!! 1 I! Ipnlnnnunmm nrnm pn any auto you do not own, hire, lease or borrow, except any auto owned by that insured listed in 9.a, their family members or an auto insured under any other policy. c. The limits and deductibles applicable to this provision will be the largest applicable to any owned " auto" for the specific insurance.
d. The following definition is added to the DEFINITIONS section of the policy:

Executive officer" means a person holding any of the officer positions created by your charter, constitution, by-laws or any similar governing document. e. The Other Insurance Condition, under Section IV— BUSINESS AUTO CONDITIONS, does not apply to the provisions of this Drive Other Car endorsement. There is no " other insurance" applicable to this endorsement.

10. DUTIES IN THE EVENT OF ACCIDENT, CLAIM, SUIT OR LOSS Under SECTION IV— BUSINESS AUTO CONDITIONS —the Duties In The Event Of Accident, Claim, Suit Or Loss Condition is amended as follows:

The requirements that you must
a. notify us of an " accident" claim, "suit" or" loss" and b. send us documents concerning a claim or" suit"
apply only when such" accident" claim, "suit" or" loss" is known to:
a. You, if you are an individual;
b. A partner, if you are a partnership;
c. An executive officer of the corporation or insurance manager, if you are a corporation; or d. A manager, if you are a limited liability company.

11. EMPLOYEES AS INSUREDS
The Who Is An Insured provision under SECTION II — LIABILITY COVERAGE is changed by adding the following:

Any employee of yours while using a covered" auto" you don't own, hire or borrow in your business or your personal affairs. This coverage is excess over any other collectible insurance.

12. Employee Hired Autos
The following is added to the Who Is An Insured Provision:

An " employee" of yours is an " insured" while operating an " auto" hired or rented under a contact or agreement in that" employee's" name, with your permission, while performing duties related to the conduct of your business.

For purposes of this coverage grant, paragraph 5. b. of the Other Insurance Condition in the Business Auto Coverage Form is replaced by the following:
b. For Hired Auto Physical Damage Coverage, the following are deemed to be covered" autos" you own:

1. Any covered" auto" you lease, hire, rent or borrow; and

2. Any covered " auto" hired or rented by your" employee" under a contract in that individual" employee's" name, with your permission, while performing duties related to the conduct of your business.

However, any" auto" that is leased, hired, rented or borrowed with a driver is not a covered" auto".

This coverage is excess over any other collectible insurance.

13. FELLOW EMPLOYEE EXCLUSION
The Fellow Employee exclusion under SECTION II — LIABILITY COVERAGE does not apply if the" bodily injury" results from the use of a covered "auto" you own or hire. This coverage is excess over any other insurance.

14. GLASS REPAIR— WAIVER OF DEDUCTIBLE
Under Paragraph D— Deductible— of SECTION III— PHYSICAL DAMAGE COVERAGE, the following is added:

No deductible applies to glass damage if the glass is repaired rather than replaced.

15. HIRED AUTO— PHYSICAL DAMAGE COVERAGE
If hired " autos" are covered "autos" under SECTION II— LIABILITY COVERAGE and if Comprehensive, Specified Causes of Loss, or Collision coverages are provided under this policy for any " auto" you own, then SECTION III— PHYSICAL DAMAGE COVERAGE is extended to" autos" you hire, subject to the following limit:

VCA 927 TX 01 09 Includes copyrighted material of Insurance Services Office, Inc. Page 3 of 5 copyright 2009, nmmmilnmmmnnnml nllllu urnlull
The most we will pay for" loss" to any hired " auto" is the lesser of:
a. $ 75,000 for" autos" of the private passenger type and $ 50,000 for all other" autos", b. The actual cash value, or
c. The cost of repairing or replacing it with other property of like kind or quality.

The deductible will be equal to the largest deductible appBcable to any owned " auto" for that coverage. No deductible applies to" loss" caused by fire or lightning.

Subject to the above limit and deductible, we will provide coverage equal to the broadest coverage applicable to any covered " auto" you own.

We will also cover loss of use of the hired "auto" if the following conditions are met:
a, it results from an accident,
b. you are legally liable, and
c. the lessor incurs an actual financial loss.

The most we will pay tor this loss of use coverage is$ 1, 000 per" accident".

16. LEASE GAP COVERAGE
Under Paragraph C. Limit of Insurance— of SECTION III —PHYSICAL DAMAGE COVERAGE, the following is added:

If a covered " auto" is leased, we will also pay the difference between the actual cash value of a covered "auto" at the time of" loss" and the remaining balance on your lease if the following conditions are met:
a. The" auto" has a long term lease and is covered on this policy. b. The lessor is added as an Additional Insured in a written lease agreement. c. You are legally obligated for the remaining balance.

We will not pay for any amounts representing excess wear and tear charges; additional mileage charges; taxes; overdue payments; penalties, interest or charges resulting from overdue payments; or lease termination fees.

17. LIABILITY COVERAGE EXTENSIONS— SUPPLEMENTARY PAYMENTS Under SECTION II — LIABILITY COVERAGE, the Coverage Extension for Supplementary Payments is revised as follows:
a. The limit for the cost of bail bonds is amended to$ 3, 500. b. The limit for reasonable expenses incurred by the" insured" is amended to $ 500 a day.

18. NEWLY FORMED OR ACQUIRED ORGANIZATIONS
a. The Who Is An Insured provision under SECTION II — LIABILITY COVERAGE is amended to include as an " insured" any organization that is formed or acquired by you and over which you maintain majority ownership. b. Paragraph a. of this provision 18. does not apply to any organization:

1. That is a joint venture or partnership,

2. That is an " insured" under any other policy,

3. That has exhausted its Limit of Insurance under any other policy, or

4. 180 days or more after its acquisition or formation by you, unless you have given us notice of the acquisition or formation. c. Paragraph a. of this provision 18. does not apply to " bodily injury" or "property damage" that results from an" accident" that occurred before you formed or acquired the organization.

19. PHYSICAL DAMAGE— TRANSPORTATION EXPENSES COVERAGE
Under SECTION III — PHYSICAL DAMAGE Coverage Extensions, the limit for Transportation Expenses is amended to $ 75 per day and the maximum is amended to $ 2,250.

20. RENTAL REIMBURSEMENT
We will pay for rental reimbursement expenses incurred by you for the rental of an " auto" of the private passenger type because of" loss" to a" covered auto" of the private passenger type. Payment applies in addition to the otherwise applicable amount of each coverage you have on a covered auto. No deductibles apply to this coverage.

Copyright 2009, I! III! I! n! ! 11! IIPINI!!!!!!'!! if! I!'!! 1!!!! I!!! We will pay those expenses incurred during the policy period beginning 24 hours after the " loss" and ending, regardless of the policy's expiration, six ( 6) days after the " loss".

Payment is limited to the lesser of the following amounts:

1. Necessary and actual expenses incurred.

2. The maximum daily payment of$ 25 for any one day.

This coverage does not apply while there are spare or reserve" autos" available to you.

If " loss" results from the total theft of the private passenger " auto", we will pay under this coverage only that amount of your rental reimbursement expenses which is not already provided for under the PHYSICAL DAMAGE COVERAGE Extension.

21. TOWING— COVERED AUTOS
Under SECTION III— PHYSICAL DAMAGE COVERAGE, Coverage for Towing is amended as follows:
a. This coverage applies to any covered "auto" for which a premium charge for towing and labor is shown in the Schedule or in the Declarations.
b. The limit Is$ 100.

VCA 627 TX 01 09 Includes copyrighted material of Insurance Services Office, Inc. Page 5 of 5 Copyright 2009, !! I!! I!!!!!! I I'! I!!! I I I! I n I l I I I I II!!! I! I I I II l I I I