Redondo Beach City Council
June 18, 2024

Emergency Vehicles, Inc.

Building Custom Emergency Vehicles Since 1971!
Team Approach | Value Engineering
705 13t h Street | Lake Park, FL 33403-2303
Tel: 800-848-6652 | Fax: 561-848-6658 | [email protected] | www.evi-fl.com January 8, 2024
Brian Long
Redondo Beach Police Department
401 Diamond Street
Redondo Beach, California 90277
Re: New Rescue Vehicle
Dear Brian,
We would like to thank you for the opportunity to submit a proposal for the new Rescue Vehicle you are considering. Enclosed you will find our quotation for the unit requested.

Construction methods vary between different manufacturers. EVI will utilize its own proven methods for the construction. We have enclosed a proposed set of specifications for your review and evaluation. We have been manufacturing aluminum modular bodies since 1974. All construction and assembly are being done at our facility utilizing EVI employees. EVI does not subcontract any work.

Our Qualifications Include:

Fifty-three (53) years’ experience in the industry
Units individually “custom built” to your exact needs
20-Year structural warranty on modular body
GSA and H-GAC Contract Holder
We respectfully request a meeting to discuss final details before construction shall begin. We will submit a full set of “detailed” construction drawings for your approval, prior to production start.

For further information about EVI, and to check on recent deliveries, you may visit our web-site at www.evi-fl.com. In the event you have any questions concerning our proposal, please feel free to call me on my cell (609.315.7151).

All of us at EVI sincerely appreciates your interest in our company and products, and are looking forward to working with you.

Respectfully,
EMERGENCY VEHICLES, INC.

Vice President of Sales
MC/jt
Enclosure
cc: Manny Perez

QUOTATION Emergency Vehicles, Inc
Redondo Beach Police Department
Brian Long
401 Diamond Street
Redondo Beach, CA 90277
310-379-2477
[email protected]
Rev. Date: 01/08/2024
Quote No: REDONDO-0001 Redondo Beach PD
01/09/2024 Page 1

PART NO QTY DESCRIPTION
== 12-FT NON-WALK-IN RESCUE (4-DR) - 0.001 07/01/22 ==
AE-04-0200 < 1 2024 FORD F-550 4 X 4 SUPER DUTY CREW CAB 205" WB 84" C/A -CAB:
-- 4-Door Conventional
GVWR:
-- 19,500 Pounds
-- Payload Plus Upgrade Package
WHEELBASE:
-- 205"
CAB TO AXLE:
-- 84"
FRAME:
-- Steel Channel | Ladder Type
FRONT BUMPER:
-- Chrome Plated
-- Lower Valance | Ground Effects
-- Front Tow Hooks
FRONT AXLE:
-- 7,000 Pound Rating
-- Front Driving Axle
REAR AXLE:
-- 14,705 Pound Rating
-- 4.88 to 1 Ratio
-- Limited Slip Differential
-- Low Deflection/High Capacity Spring Package
SHOCKS:
-- Heavy Duty Gas - Front and Rear
STEERING:
-- Power Hydraulic Assist
-- Speed Control | Tilt Steering Wheel
BRAKES:
-- Power Hydraulic | 4-Wheel Disc | 4-Wheel ABS
PARKING BRAKE:
-- Foot Pedal with Hand Release
ENGINE:
-- 6.7 Liter V8 Power Stroke Turbo Charged Diesel
-- Engine Block Heater
-- Super Cooling Package
-- Integral Throttle Control System
-- Idle Shut Down Exemption
-- Manual Regeneration Switch
-- Engine Exhaust Brake
EXHAUST:
-- Horizontal Muffler/Exhaust - RH Side Exit
TRANSMISSION:
-- TorqShift 10-Speed Automatic
-- PTO Provision
DRIVE SHAFT:
-- Heavy Duty Tubular
FUEL TANK:
01/09/2024 Quote No: REDONDO-0001 Page 2

PART NO QTY DESCRIPTION
-- Aft-Axle Tank | 40-Gallon Total Capacity
ELECTRICAL SYSTEM:
-- 12-Volt | Negative Ground
-- Heavy Duty Starter | Key Activated
ALTERNATOR:
-- Dual 397-Amps Total
BATTERIES:
-- Dual Heavy Duty | 750 CCA
HORNS:
-- Dual Electric
HOOD:
-- Lift-up Alligator Type
CAB GLASS:
-- Tinted Solar Safety Glass - All Windows
MIRRORS:
-- 54 F PowerScope Power Folding W/Autofold | Power | Heated / Turn Signal and High Intensity LED Security Lamps (Wide Spacing)
GAUGES:
-- Tachometer
-- Speedometer
-- Odometer
-- Transmission Temperature
-- Water Temperature
-- Oil Pressure (Indicator Only)
-- Fuel Level
-- Turbo Boost
-- Hourmeter
WIPERS:
-- Electric Wipers and Washers
-- Intermittent Wiper Switch
PAINT COLOR:
--Black
ENVIRONMENTAL:
-- Cab Air Conditioning
-- Heavy Duty Heater
-- Windshield Defroster
CAB SEATING:
-- 40/20/40 Cloth Split Bench - Front
-- 60/40 Rear Split Bench
-- Vinyl Bench Seat - Rear
-- Shoulder Harness Seat Belts | Outboard Position
CAB TRIM / COLOR:
-- XL Trim Level | Medium Stone
-- XL Decor Group
-- Headliner/Insulation Package
TIRES:
-- LT225/70R x 19.5F BSW Traction
-- (2) Front | (4) Rear
WHEELS:
-- (6) 19.5" Steel
---MISCELLANEOUS:
-- Fire and Emergency Prep Package
-- Jewel Effect Headlamps
-- Driver / Passenger Air Bags
-- Passenger Air Bag Deactivation Switch
-- LH / RH Door Activated Dome Light
-- Front License Plate Bracket
-- Front Stabilizer Bar
-- Coolant Recovery System
-- Molded Door Arm Rests
-- LH / RH Sun Visors
-- Cigarette Lighter
-- AM / FM Stereo with Clock / 6 Speakers ,includes MP3 player. -- SYNC Communications & Entertainment System,8"Screen Includes enhanced voice recognition, 911 Assist, AppLink, 1 smart-charging USB-C port and steering wheel audio controls.
01/09/2024 Quote No: REDONDO-0001 Page 3

PART NO QTY DESCRIPTION
-- Advanced Security Pack Includes Secure lock
-- My Key Includes Owner Control Features
-- Power Equipment Group
-- Power Windows and Door Locks Remote Keyless Entry
-- Back Up Camera
-- Carpet Delete Package
BA-00-0000 1 CHASSIS PREPARATION - GENERAL
BA-02-4010 1 TIRE PRESSURE INDICATOR(S)
BB-00-0000 1 CHASSIS FRAME RAIL PREPARATION
BB-50-0000 1 EXHAUST PIPE EXTENSION
BD-00-0400 < 1 PAIR 4-DOOR CAB RUNNING BOARDS
-- The diamond plate utilized shall be "slip resistant", meeting NFPA requirements BE-00-1500 1 CAST ALUM. FUEL FILLER(S)/CHASSIS FUEL TANK BE-00-1700 1 |-- ENGRAVED LABEL - DIESEL FUEL ONLY
BE-00-1600 1 CAST ALUM. DEF FILLER(S)/CHASSIS DEF TANK
BE-00-1715 1 |-- ENGRAVED LABEL - DEF FLUID ONLY
BF-05-0500 < 1 REAR STEP AND BUMPER ASSEMBLY
-- The diamond plate utilized shall be "slip resistant", meeting NFPA requirements BG-00-1000 1 PAIR REAR BLACK RUBBER WHEEL MUD FLAPS
BG-08-5500 1 PAIR REAR RECESSED CHROME BOLT-IN TOW RINGS BH-05-1900 1 SET STAINLESS STEEL WHEEL INSERTS - 19.5"
BI-00-0100 < 1 HEAVY DUTY TRAILER HITCH WITH SAFETY CHAIN LOOPS Rating: 10,000 lbs. towing capacity (1,000 lb. tongue weight) C0-01-0000 1 ALL ALUMINUM MODULAR BODY
CA-BB-1200 1 MODULE BODY PACKAGE | 12-FT NON-WALK-IN
CA-BD-0020 1 |-- MODULE BODY LENGTH - 144" O.D.

CA-BD-0040 1 |-- MODULE BODY WIDTH - 96" O.D "
CA-BD-0060 1 |-- MODULE BODY COMPARTMENT HEIGHT - 62"
CA-CC-0020 1 |-- DIAMOND PLATE MODULE ROOF
CA-CE-0040 1 |-- MODULE FRONT WALL - SMOOTH PAINTED
CB-75-0000 1 |-- SET STONE GUARDS
CA-CF-0020 1 |-- EXTERIOR SHEETING - 1/8" THICKNESS
CA-CG-0020 1 |-- SET ROUNDED BODY VERTICAL CORNERS
CA-CG-1020 1 |-- DRIP RAIL PACKAGE
CA-CG-2020 1 |-- PAIR DIAMOND PLATE EXTERIOR WHEELWELL PANELS CA-CG-3020 1 |-- REAR DIAMOND PLATE KICK PANEL
CC-BC-1200 < 1 |-- LOWER BODY RUB RAILS - "C" CHANNEL
Scotchlite Stripe Color: To be determined
CJ-BB-1200 1 |-- BODY INSTALLATION
CC-60-0200 1 LICENSE PLATE HOUSING W/ LED LIGHT
CC-90-0038 1 PAIR 38" SS REAR WHEEL FENDERETTES
CG-70-0000 2 ZICO #AC-2 SOLID ONE-PIECE WHEEL CHOC(S)
CG-70-0100 2 |-- ZICO #QCH-2 HORIZONTAL CHOC HOLDER(S)
DA-40-000A < 7 1/8" EXTERIOR COMPARTMENTS - DIAMOND PLATE Compartment Floors: .188" thick brushed aluminum
DA-40-0010 < 5 |-- 1/8" EXTERIOR COMPARTMENTS (REG) - DIAMOND PLATE Location: Compartments #2, #3, #4, #5 and #6
DA-40-0012 < 2 |-- 1/8" EXTERIOR COMPARTMENTS (LG) - DIAMOND PLATE Location: Compartments #1 and #7
01/09/2024 Quote No: REDONDO-0001 Page 4

PART NO QTY DESCRIPTION
DA-50-1500 < 1 UPPER REAR STORAGE COMPARTMENT - RAW ALUMINUM Equipment to be Stored: To be determined
DA-71-000R 7 COMPARTMENT DOOR CONSTRUCTION | ROLL-UP
DA-71-030L < 1 LIFT-UP COMPARTMENT DOOR(S) - LOCKING
Location: Upper ladder compartment
DA-73-0500 1 |-- COMPARTMENT DOOR PADDLE HANDLE STAINLESS STEEL(S) DA-72-0001 7 ALUMINUM DOOR MANUFACTURER - ROBINSON
DA-72-1MAL < 2 ALUMINUM "ANODIZED" ROLL-UP COMPARTMENT DOOR(S) - LOCKING (MED) Location: Compartments #2 and #6
IA-12-1825 4 |-- HANSEN #LED10WH12V-25 25"LED COMPARTMENT STRIP LIGHT(S) DA-72-2LAL < 5 ALUMINUM "ANODIZED" ROLL-UP COMPARTMENT DOOR(S) - LOCKING (LRG) Location: Compartments #1, #3, #4, #5 and #7
IA-12-1849 10 |-- HANSEN #LED10WH12V-49 49"LED COMPARTMENT STRIP LIGHT(S) DA-73-0505 8 COMPARTMENT DOOR ELECTRIC LOCK(S)
DB-00-0202 < 2 EXTERIOR COMPARTMENT (LG) SHELF TRACKS
Location: Compartments #2 and #6
DB-00-1002 < 2 3/16" (.188") EXTERIOR COMPARTMENT SHELVES (LG) - ADJUSTABLE Location: Compartments #2 and #6
DB-35-0010 < 2 SLIDE-OUT TOOL BOARD(S) - 100% EXTENSION | SMALL Location: Compartments #3 and #5
DB-35-011A < 2 |-- 3/16" ALUMINUM PLATE - SMOOTH
Location: Compartments #3 and #5
DB-54-0000 < 8 4" DIAMETER COMPARTMENT VENT(S)
Location: (1) Each compartment including rooftop compartments DB-55-1000 < 6 TURTLE TILE COVERING FOR COMPARTMENT FLOORS Color: Black
DB-55-1100 < 5 TURTLE TILE COVERING FOR COMPARTMENT SHELVES/TRAYS Color: Black
DB-55-1102 6 |-- LARGE | UP TO 45" DEEP
DF-00-SP01 < 8 SANTA CRUZ MODEL #SC-917-5 GUN MOUNT KITS Location: (4) Compartments #3 and #5 (on the slide-out tool board) DF-03-1036 < 1 SLIDE-MASTER ROLL-OUT TRAY/STEEL SLIDES: Up to 36" Deep - 600# w/100% Extension
Location: Compartment #4
Depth: 33"
DF-20-0032 1 |-- IMS PUSH/PULL LOCK - 3-RAIL (100% EXTENSION) DF-28-0048 1 |-- BLACK POWDER COATED SLIDES (3-RAIL)
DF-03-1048 < 2 SLIDE-MASTER ROLL-OUT TRAY/STEEL SLIDES: Up to 48" Deep - 600# w/100% Extension
Location: Compartments #1 and #7
01/09/2024 Quote No: REDONDO-0001 Page 5

PART NO QTY DESCRIPTION
Depth: 45"
DF-20-0032 2 |-- IMS PUSH/PULL LOCK - 3-RAIL (100% EXTENSION) DF-28-0048 2 |-- BLACK POWDER COATED SLIDES (3-RAIL)
FA-05-1010 1 SET CAB WHEELS LEFT OEM FINISH
FA-BC-1200 < 1 EXTERIOR MODULAR BODY PAINTED POLYURETHANE - NON-WALK-IN (ROLL-UP DOORS)
Color: To be determined
Code: To be determined
FD-BB-1200 1 BODY UNDERCOATING
FH-20-0010 4 INTERIOR CAB/CREW DOOR REFLECTIVE MATERIAL IA-05-0S00 1 12-VOLT ELECTRICAL SYSTEM
IA-05-8040 1 |-- SAFETY DISCONNECT
IA-05-804A 1 |-- INTELLITEC #00-00507-512 200/1200AMP MASTER BODY BUILDER

DISCONNECT/LATCH RELAY
IA-06-1000 1 DRIVER'S CONSOLE - FLOOR MOUNT
IA-10-0500 1 SWITCH LABEL PACKAGE
IA-10-1200 1 I.C.C. MARKER LIGHT/REFLECTOR PACKAGE - LED IA-12-0561 < 2 WHELEN #70CREGCS RED/WHITE LED CAB DOME LIGHT(S) W/SWITCH Location: Front and rear of the chassis cab
IA-12-0925 < 2 WHELEN #3SC0CDCR LED 3" EXTERIOR COMPARTMENT LIGHT(S) Location: Upper ladder compartment
IA-12-3205 8 "DOOR OPEN" WARNING CIRCUIT(S) W/LED LIGHT IA-12-4000 4 CAB DOORS CONNECTED TO DOOR OPEN WARNING CIRCUIT IA-13-0530 < 5 TECNIQ #E10-WS00-1 LED GROUND ILLUMINATION LIGHT(S) Location: To be determined
IA-13-0560 2 PAIR OF TECNIQ #E10-WS00-1 LED CAB AREA GROUND ILLUMINATION LIGHTS - NFPA
IA-14-1002 1 PAIR LED SIDE FACING TURN SIGNALS
IA-15-0025 1 PAIR WHELEN #M6-SERIES STOP-TAIL / BACK-UP / DIRECTIONAL LIGHTS IA-15-0027 1 |-- PAIR WHELEN #M62BTT LED STOP/TAIL LIGHTS IA-15-0028 1 |-- PAIR WHELEN #M62BU LED BACK-UP LIGHTS
IA-15-0029 1 |-- PAIR WHELEN #M62T LED AMBER DIRECTIONAL LIGHTS IB-03-0502 1 |-- PAIR OF WHELEN #M6FCV3 POLISHED LIGHT HOUSINGS (M6) IA-SP-0100 1 REMOTED SWITCH FOR ELECTRIC DOOR LOCKS.

IC-00-0020 1 ECCO #575 BACK-UP ALARM
IC-40-2000 1 GREEN BATTERY INDICATOR LIGHT
IF-00-3200 1 COMPARTMENT WIRE COVER PACKAGE
IG-00-1200 1 TRAILER LIGHT WIRING - 7-PIN RV CONNECTOR
IJ-01-0005 < 1 INSTALLATION OF CUSTOMER'S RADIO(S) + ANTENNA(S) Radio Make / Model: To be determined
IK-00-0100 1 INSTALL CHASSIS SUPPLIED BACK-UP CAMERA
JC-00-0015 1 INPOWER #DSP-DCS1 DIGITAL VOLTMETER / AMMETER W/LOW VOLT ALARM &

LIGHT (SINGLE)
JC-20-0200 < 1 ELECTRONIC THROTTLE DEVICE
Note:
-- To be sealed Carling rocker switch with blue indicator light JC-40-0000 1 FEDERAL SIGNAL #LF12ES-LED 12" GOOSE-NECK CONSOLE LIGHT(S) - VERTICAL JC-90-1200 1 KUSSMAUL 1200 AUTO CHARGE ON-BOARD BATTERY CHARGER JC-90-120G < 1 |-- REMOTE OUTDOOR - #091-187-12-R-WT WATERTIGHT STATUS CT W/ RED COVER - 1200 AC
AC Location:

Indicator Location:
01/09/2024 Quote No: REDONDO-0001 Page 6

PART NO QTY DESCRIPTION
LB-25-2012 1 |-- KUSSMAUL #091-55-15-120 15A SUPER L/L INLET W/AUTO-EJECT RED JD-70-0000 1 KUSSMAUL "LOAD MANAGER" SYSTEM W/SEQUENCER JD-75-0000 1 |-- (NFPA) CLEAR LIGHT CUT-OUT - PARK POSITION JD-90-0000 1 CHAIN IGNITION KEY
JE-00-0005 1 WHELEN #3SC0CDCR 3" LED ENGINE COMPARTMENT LIGHT(S) KB-00-0010 1 MAGNUM #MS2812 3000WATTS PURE SINEWAVE INVERTER/125A CHARGER KB-00-0020 1 |-- MAGNUM #MERC50 INVERTER/CHARGER REMOTE CONTROL AND

MONITORING PANEL
KB-00-0021 1 |-- MAGNUM #ME-400F FUSE HOLDER AND 400A SLOW BLOW FUSE KB-00-0023 1 |-- MAGNUM #MEBMK BATTERY MONITORING KIT
KC-09-0503 1 LANDLINE/INVERTER TRANSFER RELAY - 30 AMP
LB-15-1500 4 TWISTLOCK NEMA #L5-15R 120V/15 AMP EXTERIOR RECEPTACLE(S) LB-16-1500 4 HOUSEHOLD 15 AMP INTERIOR RECEPTACLE(S) - DUPLEX RE-13-1006 1 PAIR CAST SPEAKERS - THROUGH BUMPER | FORD RF-05-0105 1 WHELEN #295SLSA1 SIREN SYSTEM
SD-03-1062 4 WHELEN #M9LZC LINEAR SUPER-LED® SCENELIGHT(S) W/ CHROME FLANGE - SIDE SD-06-1022 2 WHELEN #M6ZC LINEAR SUPER-LED® SCENELIGHT(S) - REAR SD-60-0024 2 |-- WHELEN #M6FC CHROME FLANGE
SD-99-0020 1 REVERSE RELAY FOR REAR SCENE LIGHTS
TC-10-005B 2 WHELEN #50R02ZCR SUPER LED WARNING LIGHTS - RED/CLEAR LENS TC-10-090C 2 |-- WHELEN #5FLANGEC CHROME FLANGE (#500 SUPER LEDS) TC-10-010A < 2 WHELEN #LINZ6R SUPER LED WARNING LIGHT(S) - RED/CLEAR LENS -- Includes Black Flange
TC-10-090K 2 |-- WHELEN #LINZ6FC CHROME FLANGE (#LINZ6 SUPER LEDS) TC-16-0021 6 WHELEN #M6RC SERIES SUPER-LED WARNING LIGHT(S) - RED - CLEAR LENS TC-16-0902 6 |-- WHELEN #M6FC CHROME FLANGE
TC-19-0021 4 WHELEN #M9RC SERIES SUPER-LED WARNING LIGHT(S) - RED - CLEAR LENS TC-19-0902 4 |-- WHELEN #M9FC CHROME FLANGE
UB-10-1500 1 WHELEN #F4N0QLED FREEDOM IV 60" SUPER-LED LIGHT BAR (NFPA) UC-00-CABS 1 |-- WHELEN #MKEZ7 PERMANENT LIGHT BAR MOUNTING KIT - CAB ROOF VD-00-0500 1 ROADSIDE EMERGENCY SAFETY KIT (8-PIECE)
WA-05-0050 2 CHASSIS OWNER'S MANUAL(S) | FORD F250 - F550 MODELS WA-90-0050 1 BODY MANUFACTURER'S MANUAL(S)
WA-95-0050 1 |-- WIRING MANUAL(S)
WB-00-NFPA 1 NFPA LABEL PACKAGE
WB-05-0500 1 |-- SEATING CAPACITY TAG
WB-05-0600 1 |-- DO NOT WEAR HELMET WHILE SEATED LABEL
WB-05-1000 1 |-- NO SMOKING/FASTEN SEAT BELT LABEL
WB-05-1500 1 |-- ENGRAVED FLUID CAPACITY AND TYPE PLATE WB-05-2000 < 1 |-- OVERALL HEIGHT/LENGTH/GVWR PLATE
When manufactured, this vehicle was:

XX FT XX IN HIGH

XX FT XX IN LONG

XXXX LB GVWR
> Changes in height since the apparatus was manufactured shall be noted on this plate by the department <
WB-05-2200 1 |-- REAR STEP LABEL
ZA-00-0002 1 CHASSIS RELATED EXPENSES
ZC-00-0002 1 ADMINISTRATIVE
ZC-05-001A 1 |-- 12-MONTH / 12,000 MILE CONVERSION/UPFIT WARRANTY ZC-05-004B 1 |-- 20-YEAR LIMITED MODULAR BODY STRUCTURAL WARRANTY ZC-05-005B 1 |-- 5-YEAR / 60,000 MILE LIMITED ELECTRICAL WARRANTY ZC-05-006A 1 |-- 10-YEAR / 100,000 MILE LIMITED PAINT WARRANTY ZD-00-000A 1 |-- FACTORY LIAISON | PROJECT COORDINATOR
ZD-00-000B 1 |-- ENGINEERING/PRE-CONSTRUCTION REVIEW
ZD-00-000C 1 |-- IN-HOUSE PRE-DELIVERY / DETAILING / INSPECTION [01.01.24] ZD-00-0600 1 DELIVERY TO END USER
ZE-00-NFPA 1 IN-HOUSE NFPA COMPLIANCE VERIFICATION
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 1 One (1) 2024 FORD F-550 4 X 4 SUPER DUTY CREW CAB 205" WB 84" C/A AE-04-0200
-CAB:
-- 4-Door Conventional
GVWR:
-- 19,500 Pounds
-- Payload Plus Upgrade Package
WHEELBASE:
-- 205"
CAB TO AXLE:
-- 84"
FRAME:
-- Steel Channel | Ladder Type
FRONT BUMPER:
-- Chrome Plated
-- Lower Valance | Ground Effects
-- Front Tow Hooks
FRONT AXLE:
-- 7,000 Pound Rating
-- Front Driving Axle
REAR AXLE:
-- 14,705 Pound Rating
-- 4.88 to 1 Ratio
-- Limited Slip Differential
-- Low Deflection/High-Capacity Spring Package
SHOCKS:
-- Heavy Duty Gas - Front and Rear
STEERING:
-- Power Hydraulic Assist
-- Speed Control | Tilt Steering Wheel
BRAKES:
-- Power Hydraulic | 4-Wheel Disc | 4-Wheel ABS
PARKING BRAKE:
-- Foot Pedal with Hand Release
ENGINE:
-- 6.7 Liter V8 Power Stroke Turbo Charged Diesel
-- Engine Block Heater
-- Super Cooling Package
-- Integral Throttle Control System
-- Idle Shut Down Exemption
-- Manual Regeneration Switch
-- Engine Exhaust Brake
EXHAUST:
-- Horizontal Muffler/Exhaust - RH Side Exit
TRANSMISSION:
-- TorqShift 10-Speed Automatic
-- PTO Provision
DRIVE SHAFT:
-- Heavy Duty Tubular
FUEL TANK:
-- Aft-Axle Tank | 40-Gallon Total Capacity
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 2 ELECTRICAL SYSTEM:
-- 12-Volt | Negative Ground
-- Heavy Duty Starter | Key Activated
ALTERNATOR:
-- Dual 397-Amps Total
BATTERIES:
-- Dual Heavy Duty | 750 CCA
HORNS:
-- Dual Electric
HOOD:
-- Lift-up Alligator Type
CAB GLASS:
-- Tinted Solar Safety Glass - All Windows
MIRRORS:
-- 54 F PowerScope Power Folding W/Autofold | Power | Heated / Turn Signal and High Intensity LED Security Lamps (Wide Spacing)
GAUGES:
-- Tachometer
-- Speedometer
-- Odometer
-- Transmission Temperature
-- Water Temperature
-- Oil Pressure (Indicator Only)
-- Fuel Level
-- Turbo Boost
-- Hourmeter
WIPERS:
-- Electric Wipers and Washers
-- Intermittent Wiper Switch
PAINT COLOR:
--Black
ENVIRONMENTAL:
-- Cab Air Conditioning
-- Heavy Duty Heater
-- Windshield Defroster
CAB SEATING:
-- 40/20/40 Cloth Split Bench - Front
-- 60/40 Rear Split Bench
-- Vinyl Bench Seat - Rear
-- Shoulder Harness Seat Belts | Outboard Position
CAB TRIM / COLOR:
-- XL Trim Level | Medium Stone
-- XL Decor Group
-- Headliner/Insulation Package
TIRES:
-- LT225/70R x 19.5F BSW Traction
-- (2) Front | (4) Rear
WHEELS:
-- (6) 19.5" Steel
---MISCELLANEOUS:
-- Fire and Emergency Prep Package
-- Jewel Effect Headlamps
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 3 -- Driver / Passenger Air Bags
-- Passenger Air Bag Deactivation Switch
-- LH / RH Door Activated Dome Light
-- Front License Plate Bracket
-- Front Stabilizer Bar
-- Coolant Recovery System
-- Molded Door Arm Rests
-- LH / RH Sun Visors
-- Cigarette Lighter
-- AM / FM Stereo with Clock / 6 Speakers, includes MP3 player. -- SYNC Communications & Entertainment System,8"Screen Includes enhanced voice recognition, 911 Assist, AppLink, 1 smart-charging USB-C port and steering wheel audio controls. -- Advanced Security Pack Includes Secure lock
-- My Key Includes Owner Control Features
-- Power Equipment Group
-- Power Windows and Door Locks Remote Keyless Entry
-- Back Up Camera
-- Carpet Delete Package
One (1) CHASSIS PREPARATION - GENERAL
BA-00-0000
The following paragraphs outline the chassis related options necessary for the specified chassis to be utilized. Additional basic vehicle options are listed and are to be performed/installed in order to meet the needs of this agency and to outfit the vehicle for use as an emergency service apparatus.

One (1) TIRE PRESSURE INDICATOR(S)
BA-02-4010
Per NFPA 1901, each tire shall be equipped with a visual tire monitor that indicates when the tire pressure is low. The monitors shall be affixed to the valve stem on each tire. Six (6) tires sensors shall be provided and installed.

One (1) CHASSIS FRAME RAIL PREPARATION
BB-00-0000
Chassis muffler, filters, ejectors, and reservoirs shall be relocated, if necessary, to accommodate the body without modifying body compartmentation. The chassis frame rails shall be the proper length to fully support the modular body. If the frame rails need to be extended, they shall be properly modified following the chassis manufacturer's specific guidelines.

One (1) EXHAUST PIPE EXTENSION
BB-50-0000
The chassis exhaust pipe shall be extended to the side of the apparatus body to direct exhaust fumes away from the unit. The extension shall maintain the same diameter as the original pipe.

One (1) PAIR 4-DOOR CAB RUNNING BOARDS
BD-00-0400
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 4 Aluminum diamond plate running boards shall be installed below cab doors. They shall start at the front cab wheelwell where a built-in splash shield is incorporated. They shall flare back to meet the body to form a cab entrance step.

The running board outer edge shall have a 1-1/2" downward break with a 1" inward return for strength and to eliminate a sharp edge. Each step area shall be supported back to the chassis frame with heavy steel channel which is bolted for future removal should it become necessary.
-- The diamond plate utilized shall be "slip resistant", meeting NFPA requirements One (1) CAST ALUM. FUEL FILLER(S)/CHASSIS FUEL TANK
BE-00-1500
The chassis manufacturer's fuel filler neck shall be extended to the side of the apparatus body where a recessed cast aluminum housing shall be installed. The fuel line shall be properly secured and protected. It shall not be routed through the body compartments. Final installation shall meet FMVSS. The fill housing shall have a spring-loaded fuel door.

One (1) ENGRAVED LABEL - DIESEL FUEL ONLY
BE-00-1700
A heavy gauge plastic label shall be provided with the words "DIESEL FUEL ONLY" engraved in capital letters. The label shall be attached to the apparatus adjacent to the fuel fill location.

One (1) CAST ALUM. DEF FILLER(S)/CHASSIS DEF TANK
BE-00-1600
The chassis manufacturer's Diesel Emission Fluid (DEF) filler neck shall be extended to the side of the apparatus body where a recessed cast aluminum housing shall be installed. The DEF line shall be properly secured and protected. It shall not be routed through the body compartments. Final installation shall meet FMVSS. The fill housing shall have a spring-loaded door.

One (1) ENGRAVED LABEL - DEF FLUID ONLY
BE-00-1715
A heavy gauge plastic label shall be provided with the words "DEF FLUID ONLY" engraved in capital letters. The label shall be attached to the apparatus adjacent to the fill location.

One (1) REAR STEP AND BUMPER ASSEMBLY
BF-05-0500
The rear bumper and step assembly shall extend the full width of the apparatus. The bumper structure shall be an extension of the steel chassis frame. The steel framework shall be constructed of 3" steel tubing. It shall be welded into one (1) unitized assembly, then bolted to the chassis frame for replacement, if necessary.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 5 The bumper assembly frame shall be thoroughly primed, mylar insulated, then covered with .125" aluminum diamond plate. The rear corners shall be rounded to minimize injuries.
-- The diamond plate utilized shall be "slip resistant", meeting NFPA requirements One (1) PAIR REAR BLACK RUBBER WHEEL MUD FLAPS
BG-00-1000
There shall be two (2) mud flaps installed. One (1) heavy duty black rubber flap shall be bolted in place behind each pair of rear wheels. The flaps shall include company logo in white writing.

One (1) PAIR REAR RECESSED CHROME BOLT-IN TOW RINGS
BG-08-5500
There shall be a pair of heavy-duty chrome plated tow rings recessed in cast housings and securely fastened to the rear chassis frame rails. Each tow ring shall be bolted in place for removal, if necessary.

One (1) SET STAINLESS STEEL WHEEL INSERTS - 19.5"
BH-05-1900
Each outer wheel on the apparatus shall be fitted with full stainless steel wheel liners and lug nut covers. These liners shall eliminate the need for painted wheels and provide a smooth "rust free" surface for cleaning.

Valve extensions shall be installed and properly secured, when necessary, to allow for easily checking tire and pressure.

One (1) HEAVY DUTY TRAILER HITCH WITH SAFETY CHAIN LOOPS BI-00-0100
There shall be a Reese type removable trailer hitch incorporated into the steel structure of the rear bumper step. The removable socket can be stored when not in use.

Rating: 10,000 lbs. towing capacity (1,000 lb. tongue weight) One (1) ALL ALUMINUM MODULAR BODY
C0-01-0000
The modular body shall be designed and constructed to carry all types of specialized equipment and shall be installed on the specified chassis.

The modular body shall be constructed entirely of aluminum, capable of carrying the maximum payload allowed by the chassis. Body shall not be constructed using dissimilar metals. All framing and supports shall be welded using a continuous weld with an inert gas automatic welder, and shall interlock to build a complete cage.

This module body construction shall be warrantied for 20-Years (limited) from the date of manufacture, as designated on manufacturer's certification plate which shall be EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 6 attached to the modular body. Unit shall be free of all structural defects of both material and workmanship and shall maintain structural integrity for 20-Years (limited).

The module body shall be a free standing, self-supporting roll cage structure which does not rely on compartments, skin, or other strengthening components for its integrity. The module body shall have been tested using the FMVSS Static Load Test 002 criteria.

Minimum test load shall be 15,000 pounds.

The floor framing shall be designed in a grid pattern. All lateral main structural supports shall be 2" x 3" x 1/4" (.250") 6061-T6 aluminum extrusion. All other structural members shall be 2" x 2" x 1/8" (.125") 6061-T6 aluminum extrusion. Two (2) mounting rails 1/2" x 3" 6061-T6 solid aluminum shall be welded to the underside of the floor frame grid running the entire length of the modular body. These mounting rails shall align with chassis frame rails for securely fastening the modular body to the chassis.

The side wall framing shall consist of 2" x 3" x 1/8" (.125") 6061-T6 aluminum extrusion main vertical structural supports which are welded and gusseted to the primary lateral floor structural members. The remaining structural supports shall be 2" x 2" x 1/8" (.125") and shall be securely welded with spacing between frame members not to exceed 18". Where required, 1/2" solid aluminum support plates shall be welded in place for seatbelt, seat hardware, grab rail, or other options requiring additional structural support.

The roof framing shall be 2" x 2" x 1/8" (.125") 6061-T6 aluminum extrusions which are spaced on 16" centers and shall be welded into a grid pattern. In addition, longitudinal frame members shall be welded in place at the center of the roof frame to provide additional rigidity. The completed roof frame shall be recessed 1/2" down between the four (4) vertical wall frames creating a true roll cage structure.

Each frame wall, roof, and floor shall be continuously welded together at the corners and where floor members join all four (4) walls.

All load bearing side wall supports shall be gusseted to the floor frame at each structural member. There shall be a minimum of one (1) vertical side wall support and one (1) gusset support between each door opening.

The rear wheel housing construction shall be .125" aluminum welded integral with the body framing, completely sealed, and watertight. In addition, each housing shall contain a fully sealed watertight liner. These liners shall be rolled for ease of cleaning, and in one piece to avoid any pockets that may trap or collect road debris.

Proper rear wheel clearances shall be maintained, as recommended by the chassis manufacturer. An additional 2" clearance shall be provided fore, aft and above each wheel, for improved protection against wheelwell and tire damage.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 7 One (1) MODULE BODY PACKAGE | 12-FT NON-WALK-IN
CA-BB-1200
The modular aluminum body shall contain exterior storage compartments as listed below. The dimensions are actual "frame" openings (without wall and trim material). The finished opening shall be within 1/2" (.5") of the size listed or an exception shall be noted. The depth dimension shall be an inside measurement, taken with the compartment door closed.

Compartment numbering sequence shall start at the streetside front of the apparatus body, continue around the rear of the body and then forward with the highest number being at the curbside front.

Compartment interior dimensions shall be listed on drawings.

One (1) MODULE BODY LENGTH - 144" O.D.

CA-BD-0020
The body length shall be measured from the outside of the front frame to the outside of the rear frame.

One (1) MODULE BODY WIDTH - 96" O.D "
CA-BD-0040
The module body width shall be measured from outside left and right-side frames.

One (1) MODULE BODY COMPARTMENT HEIGHT - 62"
CA-BD-0060 The overall compartment height shall be measured from the ceiling to the bottom of the compartment floor.

One (1) DIAMOND PLATE MODULE ROOF
CA-CC-0020 The entire roof of the module shall be covered with .125" aluminum diamond plate. The plate shall be welded and bonded inside as well as outside to insure a watertight seal.

The diamond plate roof shall incorporate radius side corners as an integral part of its construction.

The roof shall be strong enough to be used as an observation platform to support men and equipment, as necessary.

One (1) MODULE FRONT WALL - SMOOTH PAINTED
CA-CE-0040 The entire module front wall behind the cab shall be covered with smooth .125" aluminum and shall be painted the job color.

One (1) SET STONE GUARDS
CB-75-0000

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 8 There shall be diamond plate panels installed on the lower portion of the apparatus body to protect the body paint from road debris.

One (1) EXTERIOR SHEETING - 1/8" THICKNESS
CA-CF-0020
Both sides and rear of the module frame work shall be covered with 1/8" aluminum sheeting.

This skin shall be welded to the structural members. In addition, the skin shall be bonded from the interior wherever the skin and frames meet. The bonding process shall be performed in a manner to provide a complete seal on the interior as well as exterior seal.

One (1) SET ROUNDED BODY VERTICAL CORNERS
CA-CG-0020 The vertical outer corners of the apparatus body shall be a corner radius extrusion for a smooth symmetrical appearance. Since the corners are most susceptible to damage, they shall be totally independent of the actual corner structure for easy repairability in case of damage. The lower 16" of each corner shall be covered with aluminum diamond plate for durability.

One (1) DRIP RAIL PACKAGE
CA-CG-1020
There shall be extruded aluminum drip rails installed around the complete roof line of the module body. In addition, drip rails shall be installed above all exterior compartment doors. These drip rails shall have a polished finish and shall not be permanently attached for ease of replacement, if damaged.

One (1) PAIR DIAMOND PLATE EXTERIOR WHEELWELL PANELS
CA-CG-2020 The outer panels above and around each rear wheel shall be finished with 1/8" (.125") aluminum diamond plate. The wheelwell opening edge shall be trimmed with a 1/2" inward return for strength and to eliminate sharp edges.

One (1) REAR DIAMOND PLATE KICK PANEL
CA-CG-3020
The rear of the body directly above the bumper step shall be covered with a full width aluminum diamond plate panel which extends approximately 16" to 18" in height.

One (1) LOWER BODY RUB RAILS - "C" CHANNEL
CC-BC-1200
Rub rails shall be installed on both lower sides of the module body and extend past the compartment doors to aid in protecting the doors, should the vehicle strike a solid object.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 9 Rub rails shall be constructed of 2" x 2" x 3/16" anodized aluminum c-channel extrusions. A reflective stripe shall be adhered inside the c-channel extrusion to provide a visible edge.

The rub rails shall be bolted to the heavy wall aluminum tubing side structure for replacement, if necessary.

Scotchlite Stripe Color: To be determined
One (1) BODY INSTALLATION
CJ-BB-1200
The apparatus body shall be designed as a modular unit capable of being transferred, and shall not be permanently attached.

The floor shall incorporate full length mounting rails of 3" wide by 1/2" solid aluminum mounting rails parallel with chassis frame rails. Mounting rails shall be welded directly to the floor structure at each floor member location and shall run the full length of the body.

The body shall be attached to the chassis with case hardened 5/8" (.625") steel bolts, fastened to clamping plates above the mount rails and below the chassis rails. A set of precision DIE springs shall be installed at each hold down location forward of the rear axle. These springs shall be properly adjusted to allow for frame twisting under severe condition. The bottom fasteners shall be "double" nutted to prevent loosening.

A non-metallic sill shall be sandwiched between the body floor framing and the chassis frame. The sill will prevent body movement as well as isolating the steel chassis frame from the aluminum body.

One (1) LICENSE PLATE HOUSING W/ LED LIGHT
CC-60-0200
A cast license plate housing shall be installed on the rear of the apparatus body. The cast housing shall be polished aluminum and shall include two (2) chrome plated halfmoon license plate LED lights. Lights shall be activated by the chassis parking light switch.

One (1) PAIR 38" SS REAR WHEEL FENDERETTES
CC-90-0038
There shall be a fender extension provided at the edge of the rear wheelwell opening.

A bright finish, polished stainless steel fenderette shall be installed providing a finished appearance to the wheelwell opening. The fenderette shall provide additional protection to the module body by reducing wheel wash. Fenderettes shall be designed for easy removal, if necessary.

Two (2) ZICO #AC-2 SOLID ONE-PIECE WHEEL CHOC(S)
CG-70-0000
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 10 Zico #AC-2 choc(s) shall be of "high tensile" strength aluminum. Each choc shall include a hand grip, and a double row of rugged teeth to grip almost any surface. Choc meets NFPA 1901-3 and SAEJ348 standards for design and manufacture.

Two (2) ZICO #QCH-2 HORIZONTAL CHOC HOLDER(S)
CG-70-0100
Zico #QCH-2 horizontal holder(s) shall be provided to store each folding choc under the rub rail of the apparatus body. Exact location shall be indicated on the final approval drawings.

Seven (7) 1/8" EXTERIOR COMPARTMENTS - DIAMOND PLATE
DA-40-000A
All exterior compartments shall have 1/8" (.125") aluminum diamond plate forming the compartment walls and ceiling.

Each compartment shall be constructed as an independent unit, with its own top, sides, bottom, and back. No wall of a compartment shall act as a wall for another part of the apparatus body. All seams in compartments shall be welded continuous. NO EXCEPTIONS.

Each compartment opening shall be pre-framed. After the compartment is inserted, additional tubular framing shall be installed. Compartments shall be fastened both horizontally and vertically with an inert gas automatic wire feed welder. Framing shall consist of 1" x 1" x 1/8" (.125") 6061-T5 tubing for vertical supports of back and side walls; and 2" x 2" x 1/8" (.125") tubing for under compartment floors.

All seams in the compartments shall be welded continuous on the back side.

Compartments shall be "sweep-out" style, constructed without lips protruding into any part of the compartment area.

The interior walls and ceiling shall be polished aluminum diamond plate. The interior diamond plate walls and floors shall provide a maintenance free, highly reflective compartment finish. All welding of joints shall be done on the back side to eliminate unsightly weld marks, and weld splatter inside the compartments.

Compartment Floors: .188" thick brushed aluminum
Five (5) 1/8" EXTERIOR COMPARTMENTS (REG) - DIAMOND PLATE DA-40-0010
Location: Compartments #2, #3, #4, #5 and #6
Two (2) 1/8" EXTERIOR COMPARTMENTS (LG) - DIAMOND PLATE DA-40-0012
Location: Compartments #1 and #7
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 11 One (1) UPPER REAR STORAGE COMPARTMENT - RAW ALUMINUM
DA-50-1500
A storage compartment shall be built into the upper portion of the body with access from the rear. The compartment shall be designed to handle long equipment. The construction of the compartment shall match the other exterior compartments except the walls, ceiling, and floor shall be "raw" unpainted aluminum.

Equipment to be Stored: To be determined
Seven (7) COMPARTMENT DOOR CONSTRUCTION | ROLL-UP
DA-71-000R
Exterior compartment roll-up doors shall be "custom" manufactured to perfectly fit each compartment. Compartment doors are expected to withstand years of rugged service and shall be backed by a reputable company that is based in the United States.

One (1) LIFT-UP COMPARTMENT DOOR(S) - LOCKING
DA-71-030L
Lift-up compartment door(s) shall be top horizontally hinged configuration with two (2) pneumatic piston type hold open devices. Pneumatic pistons shall be sized specifically for the weight and size of the lift-up door. The pneumatic pistons shall be securely fastened to the door frame and to the compartment frame. Each lift-up door shall open approximately 90 degrees from the body frame.

Compartment door latches shall be Eberhard #400 double catch latch assemblies.

Latches shall be adjustable, and removable without compartment door disassembly.

Compartment door handles shall be flush paddle type of stainless-steel construction.

All exterior storage compartments shall be "lockable" with the same key. The grasp portion of the handle shall be bent outward for easy grasp while wearing gloves.

Compartment door inner panels shall be covered with .125" polished aluminum diamond plate. Each diamond plate panel shall be attached to the internal door frame using stainless steel screws. These panels shall provide additional durability for the inner compartment door as well as providing a long lasting, maintenance free finish.

Location: Upper ladder compartment
One (1) COMPARTMENT DOOR PADDLE HANDLE STAINLESS STEEL(S) DA-73-0500
Compartment door handles shall be paddle handle style of stainless-steel construction.

All exterior storage compartments shall be lockable with the same key.

Seven (7) ALUMINUM DOOR MANUFACTURER - ROBINSON
DA-72-0001
All Roll-up doors shall be manufactured by "Robinson".

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 12 Two (2) ALUMINUM "ANODIZED" ROLL-UP COMPARTMENT DOOR(S) - LOCKING (MED) DA-72-1MAL Compartment door(s) shall be aluminum construction, fire apparatus quality, roll-up design. Door design shall include continuous extruded aluminum hinges and weather seal between each panel section.

Slats shall be no more than 1-1/2" wide to minimize storage of coiled doors. The coils shall store overhead into a built-in "header" specifically designed for the doors. Slats shall be double wall construction. The entire perimeter shall be weather stripped for a waterproof seal.

The locking mechanism shall be a slam latch type with key locking cylinder. All roll-up compartment doors shall be keyed alike. A full width steel lift-bar shall provide one hand operation of the roll-up door.

Integral door tracks shall be installed along the vertical sides of the compartment opening and shall not protrude more than 1-1/2" (each side) into the compartment door opening. An anodized aluminum floor sill and upper rain gutter shall be installed for each roll-up door.

Location: Compartments #2 and #6
Four (4) HANSEN #LED10WH12V-25 25"LED COMPARTMENT STRIP LIGHT(S) IA-12-1825
With roll-up compartment doors, conventional compartment lighting is ineffective and generally interferes with stored equipment. Therefore, LED "strip" lighting will be installed near the outer edge of the compartments behind the roll-up door side tracks.

These strips shall be provided on the side of the opening and shall run the full height of the compartment. These lights shall be activated by opening the compartment door.

This method of lighting shall provide even, full height lighting for the compartment without interference from shelves or stored equipment.

Five (5) ALUMINUM "ANODIZED" ROLL-UP COMPARTMENT DOOR(S) - LOCKING (LRG) DA-72-2LAL
Compartment door(s) shall be aluminum construction, fire apparatus quality, roll-up design. Door design shall include continuous extruded aluminum hinges and weather seal between each panel section.

Slats shall be no more than 1-1/2" wide to minimize storage of coiled doors. The coils shall store overhead into a built-in "header" specifically designed for the doors. Slats shall be double wall construction. The entire perimeter shall be weather stripped for a waterproof seal.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 13 The locking mechanism shall be a slam latch type with key locking cylinder. All roll-up compartment doors shall be keyed alike. A full width steel lift-bar shall provide one hand operation of the roll-up door.

Integral door tracks shall be installed along the vertical sides of the compartment opening and shall not protrude more than 1-1/2" (each side) into the compartment door opening. An anodized aluminum floor sill and upper rain gutter shall be installed for each roll-up door.

Location: Compartments #1, #3, #4, #5 and #7
Ten (10) HANSEN #LED10WH12V-49 49"LED COMPARTMENT STRIP LIGHT(S) IA-12-1849
With roll-up compartment doors, conventional compartment lighting is ineffective and generally interferes with stored equipment. Therefore, LED "strip" lighting will be installed near the outer edge of the compartments behind the roll-up door side tracks.

These strips shall be provided on the side of the opening and shall run the full height of the compartment. These lights shall be activated by opening the compartment door.

This method of lighting shall provide even, full height lighting for the compartment without interference from shelves or stored equipment.

Eight (8) COMPARTMENT DOOR ELECTRIC LOCK(S)
DA-73-0505
The compartment doors shall include power locks to remotely lock and unlock all compartment doors. They shall be able to be locked and unlocked from a remote push button on the body or key fob(s).

Two (2) EXTERIOR COMPARTMENT (LG) SHELF TRACKS
DB-00-0202 Shelving tracks shall consist of heavy-duty channels fastened to the inside of the exterior compartment. The shelf tracks shall provide unlimited vertical adjustment settings for shelving. A minimum of four (4) channels shall be installed for each compartment requiring shelf tracks.

Location: Compartments #2 and #6
Two (2) 3/16" (.188") EXTERIOR COMPARTMENT SHELVES (LG) - ADJUSTABLE DB-00-1002 Shelving shall be constructed of 3/16" (.188) smooth aluminum plate. Each shelf shall have a front and rear edge broke at 90 degrees to form a 1-1/2" lip.

Each shelf shall include a minimum of four (4) mounting brackets designed for fastening the shelf to shelving tracks. Shelf design shall allow for the removal and remounting of shelves with the 1-1/2" retainer lip down for a "lip free" shelf edge, if desired.

Location: Compartments #2 and #6
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 14 Two (2) SLIDE-OUT TOOL BOARD(S) - 100% EXTENSION | SMALL DB-35-0010
The roll-out mechanism shall consist of two (2) extending track slides manufactured by Grant Manufacturing Company. The roll-out tracks will allow the board to extend out of the compartment providing easy access to tools and appliances mounted on the roll-out board.

Location: Compartments #3 and #5
Two (2) 3/16" ALUMINUM PLATE - SMOOTH
DB-35-011A
Each vertical roll-out tool board shall be constructed of 3/16" (.188") aluminum with finished edges.

Location: Compartments #3 and #5
Eight (8) 4" DIAMETER COMPARTMENT VENT(S)
DB-54-0000 There shall be 4" diameter die stamped, stainless steel louvered vents provided for exterior compartments. The vents shall be located to provide additional ventilation and to eliminate the entry of water, mud, and other road debris from the outside of the vehicle.

Location: (1) Each compartment including rooftop compartments Six (6) TURTLE TILE COVERING FOR COMPARTMENT FLOORS
DB-55-1000
Turtle Tile plastic floor covering shall be installed covering the full length and width of the compartment floors. The plastic grid shall interlock to form a raised, cushioned, floor surface allowing air to circulate below stored equipment. The Turtle Tile covering shall include beveled edge pieces of matching, interlocking, Turtle Tile material at compartment openings.

Color: Black
Five (5) TURTLE TILE COVERING FOR COMPARTMENT SHELVES/TRAYS DB-55-1100
Turtle Tile plastic floor covering shall be installed to cover the full length and width of each compartment shelf and/or tray. The plastic grid shall interlock to form a raised, cushioned, shelf surface allowing air to circulate below stored equipment.

Color: Black
Six (6) LARGE | UP TO 45" DEEP
DB-55-1102
Eight (8) SANTA CRUZ MODEL #SC-917-5 GUN MOUNT KITS
DF-00-SP01
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 15 There shall be Santa Cruz Model #SC-917-5 Gun Mount Kit(s) provided and installed as directed by the purchaser.

Location: (4) Compartments #3 and #5 (on the slide-out tool board) One (1) SLIDE-MASTER ROLL-OUT TRAY/STEEL SLIDES: Up to 36" Deep - 600# w/100% Extension DF-03-1036
Compartment tray(s) shall be constructed of 3/16" (.188") smooth aluminum plate.

Each tray shall have a 3" lip with welded corners to form a box type tray surface. Tray design and construction shall prevent flexing and provide a rigid equipment tray.

The heavy-duty steel sliding track assembles for each tray shall be "SlideMaster" manufactured by Innovative Industries, Inc. These sliding track mechanisms shall be bolted to the aluminum equipment tray allowing the tray to extend out of the compartment providing improved access.

Each roll-out tray assembly shall be rated at 600 pounds carrying capacity.

Location: Compartment #4
Depth: 33"
One (1) IMS PUSH/PULL LOCK - 3-RAIL (100% EXTENSION)
DF-20-0032
The slide shall be held in the "locked" position by means of a spring lock.

One (1) BLACK POWDER COATED SLIDES (3-RAIL)
DF-28-0048
The SlideMaster slides shall be "black" powder coated.

Two (2) SLIDE-MASTER ROLL-OUT TRAY/STEEL SLIDES: Up to 48" Deep - 600# w/100% Extension DF-03-1048
Compartment tray(s) shall be constructed of 3/16" (.188") smooth aluminum plate.

Each tray shall have a 3" lip with welded corners to form a box type tray surface. Tray design and construction shall prevent flexing and provide a rigid equipment tray.

The heavy-duty steel sliding track assembles for each tray shall be "SlideMaster" manufactured by Innovative Industries, Inc. These sliding track mechanisms shall be bolted to the aluminum equipment tray allowing the tray to extend out of the compartment providing improved access.

Each roll-out tray assembly shall be rated at 600 pounds carrying capacity.

Location: Compartments #1 and #7
Depth: 45"
Two (2) IMS PUSH/PULL LOCK - 3-RAIL (100% EXTENSION)
DF-20-0032
The slide shall be held in the "locked" position by means of a spring lock.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 16 Two (2) BLACK POWDER COATED SLIDES (3-RAIL)
DF-28-0048
The SlideMaster slides shall be "black" powder coated.

One (1) SET CAB WHEELS LEFT OEM FINISH
FA-05-1010
The chassis/cab wheels shall be left their original OEM finish.

One (1) EXTERIOR MODULAR BODY PAINTED POLYURETHANE - NON-WALK-IN (ROLL-UP DOORS) FA-BC-1200
The final finish of the apparatus body shall be to fire apparatus standards, using aircraft finish polyurethane paint and products.

All aluminum surfaces which are to be painted, shall be sanded with a "DA" to remove the gloss. At that point, the aluminum shall receive a chemical etch for good adhesion before primer coats are applied.

The apparatus body shall be primed and prepared in accordance with the paint manufacturer specifications. The process shall be applied to all aluminum surfaces except aluminum diamond plate, polished rails, and trim mouldings.

To assure a good paint match, a large (approximately 5-1/2" by 8-1/2") paint card shall be sprayed with the paint mixture selected. It shall be sent to the purchaser for approval prior to the apparatus being painted.

Color: To be determined
Code: To be determined
One (1) BODY UNDERCOATING
FD-BB-1200
The entire underside of the body, including all the under-structure aluminum, shall be sprayed with Ziebart (or equal) black automotive undercoating. This process will aid in preventing rust and will provide sound and vapor barrier for aluminum structures.

Four (4) INTERIOR CAB/CREW DOOR REFLECTIVE MATERIAL
FH-20-0010
Scotchlite reflective material shall be applied to the interior of the cab or crew entry doors. The reflective material shall be applied to a minimum of 96 square inches of the cab or crew entry doors.

One (1) 12-VOLT ELECTRICAL SYSTEM
IA-05-0S00
All wiring shall be installed in a quality workmanship-like manner. All wiring shall be properly sized depending on the load. However, no wiring shall be smaller than #14 stranded automotive wire. The load shall not exceed 80% of the rated capacity. Where wiring passes through metal, a grommet shall be used. All wiring shall be color coded.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 17 In addition, all wiring shall be permanently and continuously imprinted as to the circuit function at regular intervals - no greater than every 8". The wiring shall be stranded copper and conform to SAE-J555 requirements. It shall have SXL type cross linked polyethylene insulation conforming to SAE-J1128 requirements.

Circuit breakers shall be of the reset type and assigned specifically for each circuit.

Circuit connections shall be made of terminal blocks, utilizing binding post screws for positive mechanical connections. All wiring connections shall be made using a mechanical crimp-on braced barrel connector. All wiring shall be installed in a protective loom or raceway.

One (1) SAFETY DISCONNECT
IA-05-8040
One (1) INTELLITEC #00-00507-512 200/1200AMP MASTER BODY BUILDER DISCONNECT/LATCH RELAY IA-05-804A
There shall be a heavy-duty body builder disconnect. It shall be rated to carry at least 125% of the maximum current. The disconnect/latching relay shall not consume any electrical current in the on/off position. A green pilot light shall be provided to signal the driver that the system is on or off.

One (1) DRIVER'S CONSOLE - FLOOR MOUNT
IA-06-1000
A floor mounted console shall be installed in the cab between the driver and passenger seating areas. This console shall house rocker switches with pilot lights controlling exterior emergency lights, flood lights, compartment lights, and other 12 volt required items.

Switches shall be set in stainless-steel panels. Panels shall be removable from the front. The console lid shall be hinged allowing access to the back of the switches and connectors for easy replacement, if necessary.

One (1) SWITCH LABEL PACKAGE
IA-10-0500 All switches and control devices supplied by the manufacturer shall include permanently engraved labels. Rocker switches shall be identified with backlit white translucent labels with black lettering.

One (1) I.C.C. MARKER LIGHT/REFLECTOR PACKAGE - LED
IA-10-1200
The completed apparatus shall be equipped with appropriate marker lights and reflectors to meet current FMVSS (Federal Motor Vehicle Safety Standards). The module shall have four (4) amber LED marker lights at the front portion, and seven (7) LED marker lights at the rear portion of the body. All marker lights shall have a polished stainless guard to protect the lens from damage. In addition, the body shall have appropriate reflective markers as required by FMVSS.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 18 The marker lights shall be automatically activated whenever the headlight switch is turned on in either the "parking light" or the "head light" mode.

Two (2) WHELEN #70CREGCS RED/WHITE LED CAB DOME LIGHT(S) W/SWITCH IA-12-0561
The chassis cab shall have a Whelen #70CREGCS 7" X 3" rectangular low profile surface mount LED light(s) installed in the module ceiling. Also, each light shall have its own on/off switch on the light head.

Location: Front and rear of the chassis cab
Two (2) WHELEN #3SC0CDCR LED 3" EXTERIOR COMPARTMENT LIGHT(S) IA-12-0925
Whelen Model #3SC0CDCR LED 3" surface mounted compartment lights shall be installed for exterior compartment lighting. Compartment lights shall be mounted in compartment door inner panels and/or compartment walls and/or compartment ceilings and shall be positioned to illuminate the compartment.

Exterior compartment lights shall be activated by a switch mounted within the door jamb of the compartment opening. When a compartment door is opened, each light for that compartment shall turn on automatically. When the compartment door is closed, each light for that compartment shall turn off. This feature provides compartment lighting only when needed, and does not unnecessarily load the electrical system.

A compartment light "kill" switch shall be installed in the driver's console. It shall override the automatic compartment light switches for day time operation, or when compartment lighting is not desired.

Location: Upper ladder compartment
Eight (8) "DOOR OPEN" WARNING CIRCUIT(S) W/LED LIGHT
IA-12-3205 Whenever an exterior compartment is open, a flashing compartment "door open" warning light shall be activated on the driver's console. The flashing compartment "door open" light shall have a 2" minimum diameter lens, red in color. This light shall operate whenever the ignition is "on", and shall be placed in clear view of the driver.

Four (4) CAB DOORS CONNECTED TO DOOR OPEN WARNING CIRCUIT IA-12-4000 The cab doors shall be connected to the compartment door open warning circuit to indicate a cab door is "open".

Five (5) TECNIQ #E10-WS00-1 LED GROUND ILLUMINATION LIGHT(S) IA-13-0530
TecNiq Model #E10-WS00-1 LED weatherproof, 12-volt light(s) shall be installed under the apparatus body in heavy duty polished stainless steel brackets to illuminate an area EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 19 beneath the vehicle during night time operation. Light(s) shall be controlled by an "on/off" rocker switch located in the driver's console.

Location: To be determined
Two (2) PAIR OF TECNIQ #E10-WS00-1 LED CAB AREA GROUND ILLUMINATION LIGHTS - NFPA IA-13-0560
Two (2) TecNiq Model #E10-WS00-1 LED weatherproof, 12-volt ground illumination lights shall be installed, one (1) each side under the cab step areas in heavy duty polished stainless steel brackets. The lights shall be automatically activated whenever the cab exit doors are opened.

The lights shall illuminate the ground to allow personnel to see the stepping surface below the cab when climbing onto or descending from the apparatus.

One (1) PAIR LED SIDE FACING TURN SIGNALS
IA-14-1002
There shall be "bullet style" LED lights located at each side of the modular body. These lights shall be located near the rear of the vehicle, approximately three (3) feet off the ground. They shall flash together with the turn signal to warn adjacent motorists.

One (1) PAIR WHELEN #M6-SERIES STOP-TAIL / BACK-UP / DIRECTIONAL LIGHTS IA-15-0025
One (1) PAIR WHELEN #M62BTT LED STOP/TAIL LIGHTS
IA-15-0027 Rear stop/tail lights shall be Whelen Model #M62BTT LED Series. Each light shall measure 4-5/16" high by 6-3/4" wide. Lights shall be wired through the chassis system for direct operation.

One (1) PAIR WHELEN #M62BU LED BACK-UP LIGHTS
IA-15-0028 Rear back-up lights shall be Whelen Model #M62BU LED Series. Each light shall measure 4-5/16" high by 6-3/4" wide. Lights shall be automatically activated whenever the vehicle is in the reverse gear.

One (1) PAIR WHELEN #M62T LED AMBER DIRECTIONAL LIGHTS
IA-15-0029 Rear directional lights shall be Whelen Model #M62T LED Series. Each light shall measure 4-5/16" high by 6-3/4" wide. Lights shall be wired through the chassis system for direct operation.

One (1) PAIR OF WHELEN #M6FCV3 POLISHED LIGHT HOUSINGS (M6) IB-03-0502 Whelen #M6FCV3 polished aluminum light housings designed to accommodate three (3) Whelen M6 lights shall be installed on the rear of the apparatus body.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 20 One (1) REMOTE SWITCH FOR ELECTRIC DOOR LOCKS.

IA-SP-0100
One (1) ECCO #575 BACK-UP ALARM
IC-00-0020
There shall be an Ecco Model #575 heavy duty back-up alarm installed on the rear of the apparatus body undercarriage. The unit shall be weatherproof and wired to the reverse circuit of the chassis for automatic operation.

One (1) GREEN BATTERY INDICATOR LIGHT
IC-40-2000
A green lens battery indicator light shall be located on the driver's console to indicate that the battery power is "on".

One (1) COMPARTMENT WIRE COVER PACKAGE
IF-00-3200
There shall be access covers installed in each exterior compartment for access to wiring. These covers shall be constructed of formed aluminum. They shall be mechanically fastened in place for quick removal.

One (1) TRAILER LIGHT WIRING - 7-PIN RV CONNECTOR
IG-00-1200
The rear trailer hitch shall have a pre-wired plug to accept a light connection from a trailer. A mating connector shall be tagged and provided loose.

One (1) INSTALLATION OF CUSTOMER'S RADIO(S) + ANTENNA(S) IJ-01-0005
Manufacturer shall install customer supplied radio system along with the antenna, as directed by the purchaser. Details will be discussed at the pre-construction conference.

Final connection and frequency calibration will be performed by the department's local FCC licensed contractor.

Radio Make / Model: To be determined
One (1) INSTALL CHASSIS SUPPLIED BACK-UP CAMERA
IK-00-0100
The manufacturer shall install the chassis supplied back-up camera in the rear of the apparatus (as high as possible).

One (1) INPOWER #DSP-DCS1 DIGITAL VOLTMETER / AMMETER W/LOW VOLT ALARM & LIGHT (SINGLE)
JC-00-0015
The vehicle shall be equipped with InPower #DSP-DCS1 digital voltmeter / ammeter to monitor system voltage and amperage. The voltmeter connection shall be direct to eliminate erroneous readings from connection voltage drops.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 21 The ammeter shall be equipped with a color coded "shunt" type digital ammeter to monitor system amperage. It shall be back lighted to view during low light conditions.

An audible and visual warning shall also be provided to alert personnel of an impending electrical system failure caused by the excessive discharge of the 12-volt battery system.

The audible alarm shall sound if the voltage at the battery or master disconnect switch drops below 11.5 volts.

One (1) ELECTRONIC THROTTLE DEVICE
JC-20-0200
The vehicle shall be equipped with an electronic automatic throttle device with red rocker switch and neon indicator. It shall automatically deactivate when the brake is applied or when the transmission is taken out of park or neutral position.

The throttle shall be preset so that when activated, it will operate the engine at appropriate R.P.M. to sustain the vehicle's charging system under full electrical load.

Note:
-- To be sealed Carling rocker switch with blue indicator light One (1) FEDERAL SIGNAL #LF12ES-LED 12" GOOSE-NECK CONSOLE LIGHT(S) - VERTICAL JC-40-0000
A flexible "goose-neck" task light with individual on/off switch shall be installed on or near the driver's console. Each light shall be equal in quality to a Federal Signal "Littlite". One (1) KUSSMAUL 1200 AUTO CHARGE ON-BOARD BATTERY CHARGER JC-90-1200
The vehicle shall be equipped with a Kussmaul Electronics #1200 battery charge system mounted on the apparatus and wired to the chassis battery system.

The charger is fully automatic, includes a remote electronic voltage sensor, and shall not overcharge the vehicles batteries. The charger shall convert the 120-volt shoreline power to 12 volts, 40 amps output to charge and maintain the batteries.

An 50amp surface mounted waterproof circuit breaker shall be provided to protect the battery charger.

One (1) REMOTE OUTDOOR - #091-187-12-R-WT WATERTIGHT STATUS CT W/ RED COVER - 1200 AC JC-90-120G
The Kussmaul Electronics #1200 battery charge system shall include a remote watertight Status Center charge level indicator to display battery condition.

AC Location:

Indicator Location:

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 22 One (1) KUSSMAUL #091-55-15-120 15A SUPER L/L INLET W/AUTO-EJECT RED LB-25-2012
There shall be a Kussmaul Model #091-55-15-120 "Super auto-eject" 120-volt, 15-amp landline inlet provided. It shall be wired to the vehicles 120-volt system for hookup from an external power source. The inlet is completely sealed and has an internal switch that closes and opens the 120V A.C. Circuit after the mating connector is inserted and before the connector is removed, which prevents arcing. The landline inlet shall automatically discharge the power cord plug when the chassis ignition switch is turned on.

One (1) KUSSMAUL "LOAD MANAGER" SYSTEM W/SEQUENCER
JD-70-0000
The vehicles 12-volt system shall be equipped with a Kussmaul "load manager" system.

This device shall insure that loads are gradually applied and removed from the 12-volt electrical system; thus, eliminating the possibility of alternator and battery damage. The device shall be activated by an emergency light master switch so that all warning devices are turned "on" or "off" in 1/2 second intervals.

In addition, the "load manager" shall monitor the vehicles battery voltage. If the electrical load exceeds the alternator output, it shall automatically de-energize up to five (5) pre-determined circuits, thus shedding excess loads and preventing battery failure.

One (1) (NFPA) CLEAR LIGHT CUT-OUT - PARK POSITION
JD-75-0000
In order to comply with current NFPA guidelines, all clear warning lights shall be shut off when the apparatus is not "calling for the right of way". The clear warning lights shall be deactivated automatically whenever the transmission is taken out of gear.

One (1) CHAIN IGNITION KEY
JD-90-0000
A chassis ignition key shall be chained to the dash panel to prevent accidental removal.

One (1) WHELEN #3SC0CDCR 3" LED ENGINE COMPARTMENT LIGHT(S) JE-00-0005
A Whelen #3SC0CDCR 3" LED light shall be installed in the engine compartment to provide additional lighting. Each engine compartment light shall be controlled by a rocker type switch located on the driver's console or near each light in the engine compartment.

One (1) MAGNUM #MS2812 3000WATTS PURE SINEWAVE INVERTER/125A CHARGER KB-00-0010
A temperature compensated combination inverter/charger shall be installed to operate in conjunction with the surveillance systems. The unit shall feature 120 VAC input and a minimum sustained 125 Amps, 12VDC output.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 23 The units charging capabilities shall be fully automatic and shall taper to a float charge mode when the system batteries have reached a fully charged state.

The units inverting capabilities shall be a minimum of 2800 watts continuous duty and shall provide 120 VAC “on demand” to all 120VAC operated equipment and AC receptacles. The output shall be “TRUE” sine wave with a maximum total harmonic distortion (THD) of less than 5% and frequency accuracy greater than 0.04%. The unit shall incorporate a thermostatically controlled fan and “under/over voltage” protection.

The 30 seconds surge power capability shall be a minimum of 3800W RMS and peak efficiency a minimum of 88%.

The inverter charger shall have the following minimum specifications:

Inverter Specifications:
-- Waveform: Pure Sine Wave
-- Input Battery Voltage Range: 9 - 17 VDC
-- Nominal AC Output Voltage: 120 VAC ± 5%
-- Output Frequency and Accuracy: 60 Hz ± 0.1 Hz
-- Total Harmonic Distortion (THD): < 5%
-- 1 Msec Surge Current (Amps AC): 70
-- 100 Msec Surge Current (Amps AC): 40
-- 5 Sec Surge Power (Real Watts): 3900
-- 30 Sec Surge Power (Real Watts): 3800
-- 5 Min Surge Power (Real Watts): 3200
-- 30 Min Surge Power (Real Watts): 3000
-- Continuous Power Output at 25°C: 2800 VA
-- Maximum Continuous Input Current: 373 ADC
-- Inverter Efficiency (Peak): 88%
-- Transfer Time: 16 Msecs
-- Search Mode (Typical): 7 Watts
-- No Load (120 VAC Output, Typical): 30 Watts
Charger Specifications:
-- Continuous Output at 25°C: 125 ADC
-- Charger Efficiency: 85%
-- Power Factor: >.95
-- Input Current at Rated Output (AC amps): 18
General Features and Capabilities:
-- Transfer Relay Capability 2 Legs at 30A for 120V / 30A -or- 240V / 60A Service -- Five Stage Charging Capability Bulk, Absorb, Float, Equalize and Battery Saver™ -- Battery Temperature Compensation Yes, 15 Ft Battery Temp Sensor Standard -- Internal Cooling 0 to 120 cfm Variable Speed Drive Using Dual 92mm Brushless DC Fans
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 24 -- Overcurrent Protection Yes, With Two Overlapping Circuits -- Overtemperature Protection Yes on Transformer, MOSFETS, and Battery -- Conformal Coating on PCB’s for Corrosion Protection Yes -- Powder Coated Chassis & Top for Corrosion Protection Yes -- Stainless Steel Fasteners for Corrosion Protection Yes -- Listings ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, Meets KKK-A-1822E Standard
Environmental Specifications:

Operating Temperature: -20°C to +60°C (-4°F to 140°F)
Non-Operating Temperature: -40°C to +70°C (-40°F to 158°F) Operating Humidity: 0 to 95% RH Non-Condensing
Max Operating Altitude: 15,000’ (4570 m)
One (1) MAGNUM #MERC50 INVERTER/CHARGER REMOTE CONTROL AND MONITORING PANEL KB-00-0020
A power monitoring panel shall provide voltage, amperage, and charging information.

An audible alarm shall indicate when the battery system DC voltage has fallen below

10.5 VDC.

A separate LED shall indicate the vehicle is connected to an external 120 VAC external power.

One (1) MAGNUM #ME-400F FUSE HOLDER AND 400A SLOW BLOW FUSE KB-00-0021
A Magnum ME-400F 400A fuse holder and fuse shall be installed to protect the battery bank, inverter/charger and cables from damage caused by accidental short circuits and overloads.

One (1) MAGNUM #MEBMK BATTERY MONITORING KIT
KB-00-0023
A Magnum MEBMK Battery Monitoring Kit shall be installed. The Magnum MEBMK Battery Monitoring Kit shall work in conjunction with the Magnum Inverter and provide the following information in an easy-to-understand display via the MERC-50 Magnum Remote Control Panel.

Monitored Information:
-- Battery bank State of Charge (SOC) 0-100%
-- DC Voltage
-- DC Amperage
-- Current flow Amp / Hour in / out
-- Resettable Amp / Hour Out Counter
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 25 -- Total Amp / Hour Out Counter
-- Minimum Volts DC
-- Maximum Volts DC
-- Temperature compensated
-- Auto detect input voltage
One (1) LANDLINE/INVERTER TRANSFER RELAY - 30 AMP
KC-09-0503
A relay system shall be installed in the 120/240-volt circuit breaker panel to allow specified 120-volt circuits to be operated by either landline or inverter power. The relay shall automatically switch the loads when landline inlet is powered.

Four (4) TWISTLOCK NEMA #L5-15R 120V/15 AMP EXTERIOR RECEPTACLE(S) LB-15-1500 Each weatherproof exterior receptacle shall be installed on the outside of the apparatus.

Each receptacle shall include a GFI circuit breaker. Each receptacle shall have a "spring loaded" gasketed cover and shall be rated for 120 volts at 15 amps. Each receptacle shall be labeled as to its voltage.

Four (4) HOUSEHOLD 15 AMP INTERIOR RECEPTACLE(S) - DUPLEX LB-16-1500 Each interior receptacle shall be installed on the inside of the module body. Each receptacle shall be rated for 120 volts at 15 amps.

One (1) PAIR CAST SPEAKERS - THROUGH BUMPER | FORD
RE-13-1006 There shall be two (2) Cast speakers with cast housings mounted through the front bumper. Speakers shall be wired to the electronic siren.

One (1) WHELEN #295SLSA1 SIREN SYSTEM
RF-05-0105
There shall be a 200-watt electronic siren provided and installed in the cab in a predetermined location. It shall be wired to a 30-amp circuit breaker and shall be powered when the chassis ignition is in the "on" position. The siren shall be a full feature Whelen Model #295SLSA1 with hyper yelp and built-in microphone for PA system.

Four (4) WHELEN #M9LZC LINEAR SUPER-LED® SCENELIGHT(S) W/ CHROME FLANGE - SIDE SD-03-1062
The side scene light(s) shall be Whelen Model #M9LZC clear lens Super-LED lights, with gradient optical tilt lens. The polycarbonate lens shall project light to illuminate an area surrounding the apparatus body. Each scene light shall measure 7-18" high by 9- 1/8" wide. Side scene light(s) shall be activated by a switch on the driver's console.

Each light includes a chrome flange.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 26 Two (2) WHELEN #M6ZC LINEAR SUPER-LED® SCENELIGHT(S) - REAR SD-06-1022
The rear scene light(s) shall be Whelen Model #M6ZC clear lens Super-LED lights, with gradient optical tilt lens. The polycarbonate lens shall project light to illuminate an area surrounding the rear of the apparatus body. Each scene light shall measure 4-5/16" high by 6-3/4" wide. Rear scene lights shall be activated by a switch on the driver's console.

Two (2) WHELEN #M6FC CHROME FLANGE
SD-60-0024
Each scene light shall be provided with a chrome plated flange.

One (1) REVERSE RELAY FOR REAR SCENE LIGHTS
SD-99-0020
The rear mounted scene lights shall double as back-up lights. Therefore, they shall be activated automatically when the vehicle is placed into reverse gear.

Two (2) WHELEN #50R02ZCR SUPER LED WARNING LIGHTS - RED/CLEAR LENS TC-10-005B
Warning lights shall be Whelen Model #500 SUPER L.E.D. with flanges. Each light shall measure approximately 2" high by 5" wide. Warning lights shall be controlled by a rocker switch located on the driver's console.

Two (2) WHELEN #5FLANGEC CHROME FLANGE (#500 SUPER LEDS) TC-10-090C
A Whelen Model #5FLANGEC chrome flange shall be furnished with each #500 LED warning light.

Two (2) WHELEN #LINZ6R SUPER LED WARNING LIGHT(S) - RED/CLEAR LENS TC-10-010A
Whelen Model #LINZ6 Series Linear Super-LED light head(s) shall be provided and installed on the vehicle, as directed by the purchaser.

Model is a subcompact, full-featured LED light head with wide-angle light spread which can be mounted virtually anywhere. Fully encapsulated electronics provide full moisture and vibration protection.
-- Includes Black Flange
Two (2) WHELEN #LINZ6FC CHROME FLANGE (#LINZ6 SUPER LEDS) TC-10-090K
A Whelen Model #LINZ6FC chrome flange shall be furnished with each #LINZ6 LED warning light.

Six (6) WHELEN #M6RC SERIES SUPER-LED WARNING LIGHT(S) - RED - CLEAR LENS TC-16-0021
Warning lights shall be Whelen Model #M6RC Super-LED Series. Each light shall measure 6-3/4" long x 4-5/16" high x protrudes 1-3/8".

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 27 The light is provided with a rear gasket ensuring that the light head and optional flange do not make contract with the vehicles surface. Warning lights shall be controlled by a rocker switch located on the driver's console.

Six (6) WHELEN #M6FC CHROME FLANGE
TC-16-0902
A Whelen Model #M6FC chrome flange shall be furnished with each M6 warning light.

Four (4) WHELEN #M9RC SERIES SUPER-LED WARNING LIGHT(S) - RED - CLEAR LENS TC-19-0021
Warning lights shall be Whelen Model #M9RC Super-LED Series. Each light shall measure 10-3/8" long x 6-1/2" high x protrudes 1-3/8". The light is provided with a rear gasket ensuring that the light head and optional flange do not make contract with the vehicles surface. Warning lights shall be controlled by a rocker switch located on the driver's console.

Four (4) WHELEN #M9FC CHROME FLANGE
TC-19-0902
A Whelen Model #M9FC chrome flange shall be furnished with each M7 warning light.

One (1) WHELEN #F4N0QLED FREEDOM IV 60" SUPER-LED LIGHT BAR (NFPA) UB-10-1500
A Whelen Edge® Ultra Freedom IV™ Linear Super-LED® LC Series 60” lightbar model # F4N0QLED shall be provided. The F4N0QLED lightbar shall incorporate an anodized extruded heavy duty aluminum base and cover chassis with two front red corner modules with two red endcap modules, two interior white modules, and two interior red modules. The front of each corner module shall consist of 12 red Linear Super-LEDs installed on a conformal coated PCB board with a thermal pad/aluminum bracket heat sink assembly. The short red endcap Linear Super-LED lights shall incorporate six red Super-LED installed on a conformal coated PCB board with a thermal pad/aluminum bracket heat sink assembly. The long red interior Linear Super-LED lights shall incorporate 12 red Super-LED installed on a conformal coated PCB board with a thermal pad/aluminum bracket heat sink assembly. The long white interior Linear SuperLED lights shall incorporate 12 white Super-LEDs installed on a conformal coated PCB board with a thermal pad/aluminum bracket heat sink assembly. The all modules will utilize a Diamond Optix™ metalized reflector and two optic collimators. All electronic components shall be conformal coated to provide additional protection. The outer lens construction shall consist of two clear Uni-Dome top lenses with a clear center lens and utilize two liquid injection molded wiper seal dividers for maximum protection against environmental elements. Metal top shields installed on the Uni-Domes and center lens shall provide protection from climatic conditions and provides passive solar radiation to direct heat away from internal components.

The F4N0QLED shall have an electronic LC I/O board. The solid state I/O board shall be microprocessor controlled.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 28 The I/O board shall have built-in reverse polarity protection and output-short protection.

The I/O board shall have the ability to flash twenty-two Super-LED warning lights. There shall be a data bank of 12 Scan-Lock™ flash patterns including steady burn with low power and cruise light functions. The cruise light function shall allow the user the four corner modules as marker courtesy lights. The F4N0QLED will have the capability to install a traffic advisor in the rear of the lightbar. The I/O board shall also have outputs to add takedown, alley lights, and auxiliary lights for each set of lights to be controlled in pairs.

All light heads shall be installed in the F4N0QLED with the aid of black polycarbonate snap-in mounting brackets. The solid state lightbar shall be vibration resistant. The lightbar will contain a 17’ 2/c 8GA unterminated power cable and 17’ 17/c 22GA unterminated control cable. All electronic components are covered by a five-year factory warranty. The F4N0QLED shall include a permanent mount kit with hardware. Optional photocell available to automatically dim the F4N0QLED at night. Additional lights, mount kits, and driver side cable can be installed for an additional cost. Optional color lens filters available in blue, red, and amber. Optional smoked lenses available at an additional charge.

One (1) WHELEN #MKEZ7 PERMANENT LIGHT BAR MOUNTING KIT - CAB ROOF UC-00-CABS The light bar manufacturer's permanent mounting kit shall be utilized to install front light bar to cab roof. Backing plates shall be added, as necessary, for a good rigid installation and to prevent "oil canning" of the cab roof.

One (1) ROADSIDE EMERGENCY SAFETY KIT (8-PIECE)
VD-00-0500
The apparatus shall be provided with a fleet safety kit to meet Department of Transportation regulations. The safety kit shall include the following:

Three (3) Triangle Warning Flares
One (1) 2-3/4 lb. 10BC Fire Extinguisher
Three (3) Light Sticks
One (1) Heavy-Duty Duffel Bag with Handle
Two (2) CHASSIS OWNER'S MANUAL(S) | FORD F250 - F550 MODELS WA-05-0050
The completed vehicle shall be delivered with chassis owner's manual(s) as supplied by the chassis manufacturer.

One (1) BODY MANUFACTURER'S MANUAL(S)
WA-90-0050
For maintenance purposes, the completed vehicle shall include body manufacturer's owner’s manual(s). Each manual shall be permanently labeled with the body builders name on the outside cover for easy identification.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 29 The manual(s) shall include the manufacturer's toll-free number and contact persons for parts, service and warranty repairs.

Each manual shall include the following paperwork as a minimum:
1) Specification breakdown for chassis and modular body; 5" x 8" paint chips of each color used (including code numbers and paint manufacturer) 2) Warranties on modular body, conversion, paint, electrical, and warranty procedure claim forms
3) Chassis information as provided on chassis (line set ticket, pre-delivery receipts) 4) Individual component manuals/warranties and registrations 5) Quality control, electrical/mechanical reports, weight certification 6) Wiring diagrams, circuit breaker panel layouts
7) "As built" detailed CAD drawings
8) Acceptance forms, copy of invoice, odometer statement, 30-day temporary tag One (1) WIRING MANUAL(S)
WA-95-0050
There shall be a complete set of wiring diagrams provided with the apparatus. It shall include color codes and functions of all electrical components installed by the body manufacturer.

One (1) NFPA LABEL PACKAGE
WB-00-NFPA
The manufacturer shall furnish all safety, operational and data labels as required in NFPA 1901.

One (1) SEATING CAPACITY TAG
WB-05-0500
A permanent plate in the driver's compartment shall be installed, specifying the seating capacity.

One (1) DO NOT WEAR HELMET WHILE SEATED LABEL
WB-05-0600
A permanent plate in the cab shall be installed that is visible to each seating position stating: "DO NOT WEAR HELMET WHILE SEATED"
One (1) NO SMOKING/FASTEN SEAT BELT LABEL
WB-05-1000
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 30 There shall be a "NO SMOKING/FASTEN SEAT BELT" label located in the cab. It shall be located in a plain view location within the cab area.

One (1) ENGRAVED FLUID CAPACITY AND TYPE PLATE
WB-05-1500
A permanent plate mounted in the driver's compartment shall be supplied. It shall specify the quantity and type of the following fluids used in the vehicle.

Engine oil
Engine coolant
Chassis transmission fluid
Drive axle lubrication fluid
One (1) OVERALL HEIGHT/LENGTH/GVWR PLATE
WB-05-2000
A permanent plate specifying the overall height, length and GVWR of the vehicle shall be affixed in the cab and shall be located to be clearly visible to the driver when seated.

The plate shall read:

When manufactured, this vehicle was:

XX FT XX IN HIGH

XX FT XX IN LONG

XXXX LB GVWR
> Changes in height since the apparatus was manufactured shall be noted on this plate by the department <
One (1) REAR STEP LABEL
WB-05-2200
A warning label shall be affixed to the rear of the apparatus body in a conspicuous location.
"DO NOT RIDE OR STAND ON REAR BUMPER/STEP WHILE VEHICLE IS IN MOTION. DEATH OR SERIOUS INJURY MAY RESULT"
One (1) CHASSIS RELATED EXPENSES
ZA-00-0002
The manufacturer shall be responsible for chassis related expenses. This shall include handling, housing and inspection to ensure that the chassis arrived as ordered. In addition, the manufacturer shall maintain garage keepers’ insurance for the full amount of the chassis value.

A final inspection with a written report shall be provided upon completion of the unit. It shall include a road test, any required adjustments to belts, headlight alignment, checking of all fluid levels and proper inflation of tires. Any required repairs shall be performed prior to delivery.

EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 31 One (1) ADMINISTRATIVE
ZC-00-0002
One (1) 12-MONTH / 12,000 MILE CONVERSION/UPFIT WARRANTY ZC-05-001A
The manufacturer warrants each new conversion/upfit including the installation of equipment and accessories delivered by the manufacturer to the original retail purchaser, to be free from defects in material and workmanship. The obligation under this warranty is limited to repair and replacement of any part or parts thereof which shall, within twelve (12) months after delivery of such conversion/upfit to the original retail purchaser or before the vehicle has been driven twelve-thousand (12,000) miles, whichever event shall first occur, be returned to it with transportation charges prepaid and which examination shall disclose to its satisfaction to have been thus defective.

The repair or replacement of defective parts or installation work under this warranty shall be made by the manufacturer without charge for parts or labor.

One (1) 20-YEAR LIMITED MODULAR BODY STRUCTURAL WARRANTY ZC-05-004B
The manufacturer warrants each new modular body (exclusive of paint finish, hardware, mouldings, windows, internal cabinets and other accouterments and accessories*) is structurally sound and free of all structural defects of both material and workmanship and further warrants that it will maintain such structural integrity for a period of 20-Years - Limited from date of manufacture, as designated on the manufacturer's certification plate attached thereto. This warranty terminates upon transfer of possession or ownership by original purchaser.
* Covered by separate warranty
One (1) 5-YEAR / 60,000 MILE LIMITED ELECTRICAL WARRANTY ZC-05-005B
The manufacturer warrants the integrity of the electrical system on each new apparatus manufactured for a period of five (5) years or 60,000 miles from the date of delivery to the original retail purchaser, whichever event shall first occur.

The manufacturer warrants its electrical system to be free from defects in material and workmanship under normal use and service. The obligation under this warranty is limited to repair and replacement, at its opinion, of any part or parts thereof which shall, within five (5) years or 60,000 miles after delivery of such apparatus to the original retail purchaser, be returned with transportation charges prepaid to an authorized distributor, and which examination shall disclose to have been defective.

One (1) 10-YEAR / 100,000 MILE LIMITED PAINT WARRANTY
ZC-05-006A
The manufacturer warrants that the paint (hereinafter "Imron System") which is supplied by Imron and its distributors and applied by the body manufacturer according to the Imron System Standard Operating Procedures for a period of ten (10) years from the EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 32 date the vehicle is finished, or before the vehicle has been driven one-hundred thousand (100,000) miles, whichever occurs first.

Imron warrants that the areas finished with the "Imron" System will be free throughout the warranty period from defects causing paint failures resulting in corrosion, blistering, cracking, peeling, hazing, chalking, delamination or unreasonable loss of gloss throughout the entire area finished.

One (1) FACTORY LIAISON | PROJECT COORDINATOR
ZD-00-000A
The successful bidder shall appoint a "project coordinator" to be the factory liaison during the course of the entire contract from the initial bid stages, through construction and final delivery. This person shall have reviewed this bid package in detail, prior to bid opening and shall be totally familiar with the specifications.

The coordinator shall be the purchaser's prime contact during the course of the contract.

It is important to this agency that the coordinator be well experienced in the sales and construction of this type of unit.

The coordinator shall be a full-time employee of the manufacturer and shall maintain normal business hours (40 hours, 5 days a week) at the manufacturer's facility.

Coordinator shall monitor construction of the vehicle on a daily basis. He/She will notify the purchaser of any potential problems and will report progress on a regular basis.

Project Coordinator: (Name/Position)
Michael Cox / Vice President of Sales
Number of Years Experience in the Industry:

Thirty-Eight (38) Years
Number of Years Employed by Manufacturer:

Twenty-Nine (29) Years
Total Successful Projects (Vehicles) Handled with Current Manufacturer:

In Excess of 1300
Hours/Days a Week Coordinator is Available at Factory:

Forty (40) Hours / Five (5) Days
EVI PROPOSED SPECIFICATIONS January 8, 2024
REDONDO BEACH FIRE DEPARTMENT – CUSTOM RESCUE VEHICLE 33 Manufacturer will notify this agency in writing of any personnel change that will affect the status of Project Coordinator, as it is not desirable for this agency to be shuffled from one person to another. Any replacement for the project coordinator shall have equal or more experience than the original coordinator.

One (1) ENGINEERING/PRE-CONSTRUCTION REVIEW
ZD-00-000B
An engineering/pre-construction review shall be held to discuss all facets of the specifications and drawings. Engineering shall provide updated production drawings to the purchaser. Manufacturer shall not commence construction of the unit without written approval of the production drawings from the purchaser.

One (1) IN-HOUSE PRE-DELIVERY / DETAILING / INSPECTION [01.01.24] ZD-00-000C
The completed unit shall be thoroughly cleaned and polished prior to delivery and acceptance. In addition, the unit shall be delivered with not less than a quarter (1/4) tank of fuel, unless otherwise specified.

One (1) DELIVERY TO END USER
ZD-00-0600
The completed apparatus shall be delivered to the purchaser with full instructions provided to purchaser personnel on operation, care, and maintenance of apparatus at the purchasers’ location. The apparatus shall be delivered with not less than a quarter (1/4) tank of fuel, unless otherwise specified.

Manufacturer shall notify this agency of the exact completion date at least ten (10) working days prior to completion. The apparatus shall be thoroughly inspected for compliance to this specification prior to acceptance and payment.

If the apparatus is not ready, or major deficiencies are found, it will be the manufacturer's responsibility to cover all expenses associated in making the vehicle acceptable.

One (1) IN-HOUSE NFPA COMPLIANCE VERIFICATION
ZE-00-NFPA
The manufacturer shall test the entire vehicle to assure compliance to current NFPA 1901 Standards.

Emergency Vehicles, Inc. www.evi fl.com
1 Rev. 01/01/2024
EVI Experience and Qualifications
After several years of gaining valuable experience with a local First Aid and Rescue Squad, Ernst R. Temme decided that there was a definite need for specialized vehicles to meet the unique requirements of ambulances and first response vehicles.

Utilizing his "hands-on" experience, he founded an ambulance manufacturing facility in 1971 known as "Custom Ambulances of Florida, Inc." Rapid company growth required several expansions and in 1976 a new company called "EVF Inc." was formed. Ernst R. Temme became President and General Manager of EVF Inc. The company continued to grow and moved into a new facility in 1980. Ernst R. Temme was recognized by his peers and was elected President of the Ambulance Manufacturer's Association, and proudly served two terms. In 1988 the major shareholder of EVF Inc., having continual health problems, decided to retire. Since a qualified buyer could not be found, the decision was made to close the manufacturing facility.

Realizing the continued need of Custom Designed Vehicles, Mr. Temme and a few key personnel decided to continue to put their knowledge and experience to work. In April of 1988 "Emergency Vehicles, Inc." (EVI) was formed. This way, the past customers of EVF Inc. could be served and the well-established product could continue.

EVI obtained the rights to the product trademark, trade names, manufacturing specifications, testing data, certifications, engineering data and drawings. The decision was made to “fine tune” the already accepted product and to concentrate on the highly specialized RESCUE VEHICLE market. By positioning itself in this exclusive niche of the industry, EVI cemented its future and began construction on a brand new factory in January of 1999. EVI presently designs and manufactures a standard line of rescue vehicles, law enforcement vehicles, as well as "custom" and specialty mobile aluminum products. The company's 50,000 square foot facility is located in the industrial section of Lake Park, Florida.

In 2002 a decision was made to enter the Law Enforcement Market. EVI realized the need for specialized vehicles such as; Mobile Command Vehicles, SWAT Vehicles, Dive/Recovery Vehicles, Communications Vehicles, Surveillance Vehicles, etc. The law enforcement market has become a “key” component in EVI’s growth and future success.

The combination of Fifty-three (53) Years industry experience in custom designing, and the strength of a proven product, gives the customer an unequaled opportunity to purchase a vehicle designed around his or her operation and needs... within budget.

Emergency Vehicles, Inc. www.evi fl.com
2 Rev. 01/01/2024
MANUFACTURING FACILITY:
50,000 Square Foot Facility
Complete Paint Shop with Drive-Thru Paint Booth
Complete Sheet Metal and Fabrication Shop
Complete Cabinetry Shop
Complete 12VDC and 120VAC Electrical Shop
(8) 10,000 Pound Vehicle Lifts
LOCATION:

Palm Beach County, Florida
MANUFACTURING/REFURBISHING EXPERIENCE:
53 Years
Complete Repair, Modifications and Upgrades to all Authorized Equipment EMPLOYEES:
38 STANDARD WARRANTIES:
20-Years Limited Structural Warranty – Module Body (N/A on Glider Kits/Conversions) 12-Months/12,000 Miles Warranty – Upfit/Conversion
10-Years/100,000 Miles Limited Warranty – Paint
5-Years/60,000 Miles Limited Warranty – Electrical
OTHER BENEFITS:

GSA Schedule Contract Holder (GS-30F-0005R)
H-GAC Contract Holder (FS12-23)
CoStars Contract Holder (013-E22-261)
Qualifies as an MBE Vendor
Responsive Production Time
Has Produced in Excess of 3000 Aluminum Modular Bodies Since 1974 Vehicles have been Tested and Certified to Meet Federal Motor Vehicle Safety Standards, Including Standard #002 for Roll-Over Integrity Vehicles are Manufactured in Compliance to the Standards of the Ford “Qualified Vehicle Modifier” (QVM) Program
Welding in Compliance to “American Welding Society Standards” (AWSS) Emergency Vehicles, Inc. www.evi fl.com
3 Rev. 01/01/2024
Key Personnel
Education of our employees is of paramount importance. Because EVI is a “custom” manufacturer, high levels of craftsmanship and skill are required to consistently provide high value products in an ever-changing environment.

Below outlines our key personnel.

Name Title Industry Experience
(Years)
Ernst R. Temme President 53
Barbara A. Temme Comptroller 46
Jo Anne Taliercio Administrator 42
Ana Ledesma Director of Operations 16
Michael Cox Vice President of Sales 38
Lee Potter Regional Sales Manager (Southern) 32
Josh Hoefert Regional Sales Manager (Northwest) 12
Jeffrey Chriss Plant Manager 39
Noe Suarez Mechanical Design Engineer 24
Kathy Sirum Purchasing 22
Laura Flemal Accounting | HR 33
Chris M. Temme Executive VP / Director 37
Steve Reichard Sr. Welder 27
David Lezcano Sr. Carpenter 9
Erik Del Cid Sr. Electrician 29
Joseph Knox Sr. Painter 25
Steve Waterman Communications A/V Technician 22
EVI does not use any subcontractors. All work is performed in-house at our 50,000 square feet of manufacturing facility. Located in Lake Park, Florida, EVI maintains some of the industry’s most impressive equipment and processes.

Emergency Vehicles, Inc. www.evi fl.com
4 Rev. 01/01/2024
Approach to Providing the Services
EVI (Emergency Vehicles, Inc.) has served the fire and rescue industry since 1971, custom designing, manufacturing, and placing into service emergency vehicles. We are recognized as a business with a SOLID reputation for integrity and ethics. Since being founded by Ernst R.

Temme, the company has expanded to its present status as one of the country’s premier emergency vehicle manufacturers. The company has a strong cultural dedication to maintaining the highest standards of excellence in craftsmanship, design and service.

EVI has met the delivery and budget requirements of our customers. Our vehicles have proved to be extremely reliable, and have exceeded the expectations of our customers. We have received numerous feedbacks regarding the quality of workmanship, ease of operation, and service provided.

We have a separate area in our facility to work in projects on an “as needed basis”. We have many neighboring departments that bring their units by for a modification or conversion without going through the scheduling process. EVI is currently working on remounts for the D.E.A. and all units have been delivered within the time specified, and in fact ahead of schedule.

EVI vehicles conform to the most recent edition of the National Fire Protection Association (NFPA 1901) Standard for Automotive Fire Apparatus.

Customer satisfaction has been the major contributor to EVI’s growth. Our success is directly related to our philosophy of listening, having patience, and understanding the customer’s needs.

All engineering is Computer Aided Design (CAD). Up-to-date computerization is used to manage the manufacturing process as well. Each vehicle is put through an extensive quality control inspection prior to delivery. Our factory is located in Lake Park, Florida. See attached photograph of our facility and capabilities.
12 MONTH / 12,000 MILE

CONVERSION / UPFIT WARRANTY
Original Purchaser’s Name
Street Address City State Zip
Identification Date Delivered
twelve (12) months
twelve thousand (12,000) miles

EQUIPMENT AND ACCESSORY DISCLAIMER

CHASSIS WARRANTY
best
OWNER’S OBLIGATION

WHAT TO DO IF THERE IS A QUESTION REGARDING WARRANTY
EMERGENCY VEHICLES, INC.
www.evi fl.com

NO OTHER WARRANTY
20 YEARS LIMITED

MODULAR BODY STRUCTURAL WARRANTY
Annual Renewal Required
Original Purchaser’s Name EVI No.

Street Address City State Zip
Vehicle Identification No. Mileage Date Delivered Authorized Signature 20 YEARS – LIMITED
* Covered by separate Warranty
OWNER’S OBLIGATION
KEEP YOUR EMERGENCY VEHICLES, INC. WARRANTY IN FORCE
Emergency Vehicles, Inc.,

WHAT TO DO IF THERE IS A QUESTION REGARDING WARRANTY
EMERGENCY VEHICLES, INC.
www.evi fl.com

NO OTHER WARRANTY
10 YEAR / 100,000 MILE

LIMITED PAINT WARRANTY
Annual Renewal Required
Original Purchaser’s Name EVI No.

Street Address City State Zip
Vehicle Identification No. Mileage Date Delivered Authorized Signature I. THE WARRANTY
EVI Imron System Standard Operating Procedures
Labor and Paint
Imron Elite w/Clear coat
15%
II. WARRANTY PERIOD
EVI
III. EXCLUSIONS FROM THE WARRANTY
IV. NOTICE
EVI
EVI
V. CLAIMS PROCEDURE
EVI
VI. NO OTHER WARRANTY
OWNER’S OBLIGATION
KEEP YOUR EMERGENCY VEHICLES, INC. WARRANTY IN FORCE
Emergency Vehicles, Inc.,

WHAT TO DO IF THERE IS A QUESTION REGARDING WARRANTY
EMERGENCY VEHICLES, INC.
www.evi fl.com

NO OTHER WARRANTY
5 YEARS / 60,000 MILES

LIMITED ELECTRICAL WARRANTY
Annual Renewal Required
Original Purchaser’s Name EVI No.

Street Address City State Zip
Vehicle Identification No. Mileage Date Delivered Authorized Signature (5) years or 60,000 miles
(5) years or 60,000 miles
Items specifically covered by this warranty are:

Items excluded are:

EQUIPMENT AND ACCESSORY DISCLAIMER

CHASSIS WARRANTY
best
OWNER’S OBLIGATION
KEEP YOUR EMERGENCY VEHICLES, INC. WARRANTY IN FORCE
Emergency Vehicles, Inc.,

WHAT TO DO IF THERE IS A QUESTION REGARDING WARRANTY
EMERGENCY VEHICLES, INC.
www.evi fl.com

NO OTHER WARRANTY

02/03/2023
Brown & Brown of Florida, Inc.
1201 W Cypress Creek Rd
Suite 130
Fort Lauderdale FL 33309
(954) 776-2222 (954) 776-4446
[email protected]
Emergency Vehicles, Inc.
705 13th Street
Lake Park FL 33403
Hartford Fire Insurance Company 19682
Hartford Casualty Insurance Company 29424
Hartford Underwriters Insurance Company 30104
A 21UENSV7537 02/01/2023 02/01/2024
1,000,000
300,000
10,000
1,000,000
2,000,000
2,000,000
Employee Benefits 1,000,000
A 21UENSV7537 02/01/2023 02/01/2024
1,000,000
Medical payments 5,000
B
10,000
21HHUQO0641 02/01/2023 02/01/2024
1,000,000
1,000,000
C N 21WESV7538 02/01/2023 02/01/2024
500,000
500,000
500,000
A Garage Legal Liability
Garage Keepers Physical Damage 21UENSV7537 02/01/2023 02/01/2024 Limit $1,000,000
Comp Ded $500
Coll Ded $500
***Proof of Insurance***
Emergency Vehicles, Inc.
705 13th Street
Lake Park FL 33403

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE

THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.

INSURER(S) AFFORDING COVERAGE
INSURER F :

INSURER E :

INSURER D :

INSURER C :

INSURER B :

INSURER A : NAIC # NAME: CONTACT
(A/C, No): FAX
E-MAIL ADDRESS: PRODUCER
(A/C, No, Ext): PHONE

INSURED
COVERAGES CERTIFICATE NUMBER: REVISION NUMBER:

IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed.

If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS

CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

OTHER: (Per accident)
(Ea accident)
$
$ N / A

SUBR WVDADDL
INSD

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $
$
$
$ PROPERTY DAMAGE
BODILY INJURY (Per accident)
BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY

AUTOS ONLY AUTOS NON-OWNED OWNED SCHEDULED

ANY AUTO

AUTOMOBILE LIABILITY

Y / N WORKERS COMPENSATION
AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED?
(Mandatory in NH) DESCRIPTION OF OPERATIONS below
If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $
$
$ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEEE.L. EACH ACCIDENT EROTH- STATUTE PER
(MM/DD/YYYY) LIMITS POLICY EXP(MM/DD/YYYY) POLICY EFFLTR TYPE OF INSURANCE POLICY NUMBER INSR
DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB EACH OCCURRENCE $ AGGREGATE $
$ OCCUR
CLAIMS-MADE DED RETENTION $ PRODUCTS - COMP/OP AGG $ GENERAL AGGREGATE $ PERSONAL & ADV INJURY $ MED EXP (Any one person) $ EACH OCCURRENCE $ DAMAGE TO RENTED PREMISES (Ea occurrence) $ COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO- JECT LOC

CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY)

CANCELLATION
AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03)
© 1988-2015 ACORD CORPORATION. All rights reserved.

CERTIFICATE HOLDER
The ACORD name and logo are registered marks of ACORD
HIRED

AUTOS ONLY