TITLE PAGE
PROJECT NAME AND ADDRESS
SALESPERSON: Sean Campbell
February 02, 2023
DESIGNER:
DATE:
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes, the applicable building codes 2019 CBC& CEC.
This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Artical 600.6 (A)(1) of the National Electrical Code 3) All outdoor signs to be controlled with a photocontrol or outdoor astronomical time switch control
NOTES:
COMPANY &
ADDRESS:
United Sign System
5201 Pentecost Drive
Modesto, CA 95356
(209) 543-1320
INDEX :
PAGE 1: TITLE PAGE
PAGE 2: ELECTRONIC MESSAGE CENTER MONUMENT
PAGE 3: WAY FINDING PANELS FOR POLE SIGN
PAGE 4: WAY FINDING PANEL FOR EXISTING STREET LIGHT
INSTALL NOTES:
“Work shall be installed in accordance with the approved construction documents, and any changes made during construction that are not in compliance with the approved construction documents shall be resubmitted for approval as an amended set of construction documents.”
PAGE: 1
Ivan Lee
259 N. Wilma Avenue
Ripon, CA 95366
CITY of RIPON
WAY FINDING SIGNS
PAGE 5: PHASE 1 - SIGN SCHEDULE AND MAP
PHASE 1
PAGE 6 - 10: PHASE 1 - SIGN LOCATION STREET VIEW
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
2 EMC Monument
PAGE: 2
DOUBLE FACE LED ILLUMINATED MONUMENT SIGN W/ EMC
Scale: 3/4” = 1’-0”
Alum. Fab. Roof And Cornices Painted
to match building trim color
SIDE VIEW
Scale: 3/4” = 1’-0”
PRODUCT SPECIFICATIONS
Pixel Pitch: W6mm LED RGB
Pixel Matrix: 90 X 180
Ventilation Style: Front Ventilation
Cabinet Size: 41in H x 6ft 3in L x 5in D
Viewing Area: 36in H x 6ft L
Electrical Service: 120 VOLT 11.0 amps ( 11.00 per face) Single Phase Service. Refer to the Installation
manual for details on wiring. Based on 18
hours of operation a day, plus or minus 10%
depending on how the sign is programmed.
Example: 6.8 KWHrs a day x $0.07 =
$0.48 /Day
4”
8 1/2” 3” 3’-5” 7 1/2”
5’-0” SIGN HEIGHT
2”
8’-0”
8’-6”
10 1/2” 6’-3” 10 1/2”
1 1/2”
1/2” Clear acrylic push thru copy w/
#127 Intense Blue vinyl overlay.
Cabinet body Tex-coated and painted
to match existing building wall
30” x 9’ x 2” deep concrete pad
1’-6”
2’-0”
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
WAY FINDING SIGNS
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 3
1/8” alum. panel painted
to match pole w/
#125 Golden Yellow vinyl
overlay. Logo to be
Digital printed.
Way Finding Directional Sign
3” dia. round fluted pole direct burial
Acorn Finial top
Europa Base
MetalCraft Industry, Inc.
WAY FINDING SIGN ELEVATION N.T.S. 12’-0”
2 way finding
1 way finding
WAY FINDING PANEL ELEVATION Scale: 1” = 1’-0”
8’-3”
2’-9”
2’-0”
2’-9” 1’-0”
3’-0”
10”
Typ. 2” typ. 2” typ.
12’-0”
9’-0” 2’-0” 1’-0”
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
WAY FINDING PANELS
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 4
STREET LIGHT PANEL ELEVATION N.T.S. 7’-6” to grade
Typical
3 Lines Way Finding
WAY FINDING PANEL ELEVATION Scale: 1 1/2” = 1’-0”
2’-6”
2’-0”
8”
Typ. 1 1/2”
Typ.
2’-0”
2’-0”
2 Lines Way Finding
2’-0”
1’-6”
1/8” alum. panel painted
to match pole w/
#125 Golden Yellow vinyl
overlay. Logo to be
Digital printed.
1 1/2”
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
PHASE 1 - SIGN SCHEDULE
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 5
Sign # Location Sign Content
1 N/E corner of Colony Road & Hoff Drive Left Arrow - Mistlin Sports Park, Right Arrow - Historic Downtown 2 N/E corner of Colony Road & Jack Tone Road Right Arrow - Mistlin Sports Park 3 Top of Interchange Left Arrow - Mistlin Sports Park
4 S/E corner of River Road & Jack Tone Road Right Arrow - Mistlin Sports Park 5 Fulton Avenue/Colony Road Roundabout Left Arrow - Mistlin Sports Park, Right Arrow - Historic Downtown 6 S/W corner of River Road & Fulton Avenue Up Arrow - Historic Downtown 7 Western exit from Mistlin Sports Park Right Arrow - Freeway, Left Arrow - Historic Downtown 8 Fulton Avenue/Colony Road Roundabout Up Arrow - Historic Downtown, Right Arrow - Freeway 9 Arc Way/Fulton Avenue - combine on 1 pole with sign #10 Up Arrow - Historic Downtown, Left Arrow - Freeway 10 Arc Way/Fulton Avenue - combine on 1 pole with sign #9 Right Arrow - Mistlin Sports Park, Left Arrow - Historic Downtown 11 N/E corner of Arc Way & Milgeo Road Up Arrow - Mistlin Sports Park & Historic Downtown 12 Wilma Avenue Roundabout Right Arrow - Historic Downtown 13 Front of City Hall Double sided Electronic Message Center 14 S/W corner of Wilma Avenue & Main Street Left Arrow - Historic Downtown 15 N/E corner of East Main Street and 2nd Street Overcrossing Up Arrow - Historic Downtown 16 Top of 2nd Street Overcrossing Right Arrow - Historic Downtown 17 N/W corner of 2nd Street and S. Stockton Avenue
Pole
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
Yes
Yes
Yes
Mount to Light Pole Right Arrow - Historic Downtown
PHASE 1:
1 2
3 5
7 9
11 13
15 17
4 6
8 10
12 14 16
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
SIGN LOCATION STREET VIEW
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 6
N
➤
Sign #1 Location
SIGN-1
2’-9”
3’-0”
SIGN-1: N/E corner of Colony Road & Hoff Drive
6.79 ft
N
➤
Sign #2 Location
SIGN-2
3’-0”
SIGN-2: N/E corner of Colony Road & Jack Tone Road
2’-0”
5.22 ft
N
➤
Sign #3 Location
SIGN-3: Top of Interchange
SIGN-3
3’-0”
2’-0”
8.41 ft
N
➤
Sign #4 Location
SIGN-4: S/E corner of River Road & Jack Tone Road
SIGN-4
3’-0”
2’-0”
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
SIGN LOCATION STREET VIEW
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 7
6.09 ft
➤
N
Sign #5 Location
SIGN-5: Fulton Avenue/Colony Road Roundabout SIGN-5
2’-9”
3’-0”
5.95 ft
N
➤
Sign #6 Location
SIGN-6: S/W corner of River Road & Fulton Avenue
SIGN-6
3’-0”
2’-0”
7.56 ft
N
➤
Sign #7 Location
SIGN-7: Western exit from Mistlin Sports Park
SIGN-7
2’-9”
3’-0”
7.11 ft
N
➤
Sign #8 Location
SIGN-8: Fulton Avenue/Colony Road Roundabout
SIGN-8
2’-9”
3’-0”
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
SIGN LOCATION STREET VIEW
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 8
SIGN-9 & 10: Arc Way/Fulton Avenue - combine on 1 pole.
7.78 ft
N
➤
Sign #9 Location
5.56 ft
N
➤
Sign #9 & #10 Location
SIGN-9 & 10: Arc Way/Fulton Avenue - combine on 1 pole.
SIGN-9
2’-9”
3’-0”
SIGN-10
2’-9”
3’-0”
12’-0”
8’-3” 2’-9” 1’-0”
SIGN-10
SIGN-9
SIGN-10
SIGN-9
SIGN-9 & 10: flag mounted on 1 pole.
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
SIGN LOCATION STREET VIEW
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 9
SIGN-11: N/E corner of Arc Way & Milgeo Road
SIGN-12: Wilma Avenue Roundabout
SIGN-13: N/E corner of Arc Way & Milgeo Road
SIGN-14: Wilma Avenue Roundabout
8.08 ft
N
➤
Sign #11 Location
SIGN-11
2’-9”
3’-0”
6.05 ft
➤
N Sign #12 Location
SIGN-12
3’-0”
2’-0”
7.90 ft
N
➤
Sign #13 Location
SIGN-13
8.44 ft
N
➤
Sign #14 Location
SIGN-14
3’-0”
2’-0”
7.20 ft
N
➤
Sign #16 Location
5.94 ft
N
➤
Sign #15 Location
Project Information
Client:
Location:
Address:
City/ST/Zip:
Phone:
Fax:
Sales: Designer:
This is an original drawing created by United Sign Systems. It is loaned as part of an advertising or identification program being planned for you by United Sign Systems. It is requested this material is not to be shown to any one outside your organization, nor used, reproduced, copied or registered trademarks) remain the property of United Sign Systems until transferred actual sale.
exhibited in any fashion whatsoever. All or part of this design (except for COPYRIGHT 2018 United Sign Systems. This artwork is the exclusive property of United Sign Systems and cannot be reproduced without written permission of United Sign Systems FILE: city of ripon signs - ripon Date: 09-08-22 Job #00000 Page:
5201 Pentecost Drive Modesto, Calif. 95356
1-800-481-SIGN
Phone: 209-543-1320 Fax: 209-543-1326
C.S.C.L. #718965
Client Review Status Revision
United Sign Systems requires that an "Approved" drawing be obtained from the client prior to any production release or production release revision
LANDLORD APPROVAL DATE
CLIENT APPROVAL DATE
City of Ripon
Sean Campbell IL
259 N. Wilma Avenue
Ripon, CA 95366
SIGN LOCATION STREET VIEW
Date
00-00-00
Release By: 00-00-00
1 -
1) This sign is intended to be installed in accordance with the requirements of Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 2) The location of the disconnect switch after installation shall comply with the Srtical 600.6 (A)(1) of the National Electrical Code -
2 - 00-00-00
PAGE: 10
SIGN-15: N/E corner of East Main Street and 2nd Street Overcrossing SIGN-16: Top of 2nd Street Overcrossing
SIGN-17: N/W corner of 2nd Street and S. Stockton Avenue SIGN-16
3’-0”
2’-0”
SIGN-15
3’-0”
2’-0”
2’-0”
1’-6”
1 1/2”
SIGN-17
8.51 ft
N
➤
Sign #17 Location
MOUNTED ON EXISTING LIGHT POLE