Retail Purchase Order
RDO Equipment Co.
20 Iowa Avenue
Riverside CA, 92507
Phone: (951) 778-3700 - Fax: (951) 778-3746
Bill To:
CITY OF RIVERSIDE PARKS
8095 LINCOLN AVE
5950 ACORN ST
RIVERSIDE, CA, 925041036
RIVERSIDE ()
(951) 351-6157
Ship To:
8095 LINCOLN AVE
5950 ACORN ST
RIVERSIDE, CA, 925041036
(951) 351-6157
Purchase Order Date:
Purchase Order #:
Purchaser Account #:
Customer Purchaser Type:
Customer Market Use:
Location of First Working Use:
Dealer Account Number:
Regional Account Manager:
Phone:
Fax:
Email:
4/4/2022
1544210
6157020
Governmental - City/Town/Village
Other - Parks
RIVERSIDE, CA, 925041036
177637
Dan Prosio
(888) 527-3793
(714) 617-9684
[email protected]
Comments
444P RETAIL ORDER. EXPECTED DELIVERY EARLY 2023
GP BUCKET HAS BEEN REPLACED WITH GRAPPLE BUCKET
PRICING IS GOOD THROUGH MAY 31. SIGNED RDO RETAIL PURCHASE ORDER BEFORE MAY 31 WILL HOLD MACHINE AND PRICING UNTIL FORMAL CITY PURCHASE ORDER CAN BE PROVIDED. ANY FINANCING OPTIONS CAN ONLY BE APPLIED AT TIME OF DELIVERY DUE TO VOLATILITY IN THE MARKET.
Equipment Information
Quantity Serial Number
Stock Number
Hours
(approx.)
Status / Year / Make / Model
Additional Items
List Price
Per Unit
Cash Price
1 TBD
TBD
0 New 2022 JOHN DEERE 444P $279,585.00
Customer Discount SOURCEWELL - #032119-JDC ($103,446.45) Warranty -John Deere Comprehensive-60 Months, 5000
Hours,Deductible: 0, Exp Date: 5/2/2027
$8,933.00
PM Elite Final Tier 4 - 500 - 5000 Hours $29,052.90
Freight in FACTORY FREIGHT $7,100.00
Prep / Reconditioning PDI $2,500.00
Freight Out CUSTOMER DELIVERY - 2 TRUCKS $1,000.00
1 TBD
TBD
0 JRB 2.5YD X 100" GRAPPLE BUCKET $19,424.99
1 TBD
TBD
0 PALADIN 103" BROOM (8' ANGLE) $17,611.56
Equipment Subtotal: $261,761.00
D1544210 Page 1 of
7 Purchase Order Totals
Balance: $261,761.00
Total Taxable Amount: $232,708.10
CA STATE TAX: $13,962.49
CA COUNTY TAX: $581.77
CA CITY TAX: $2,327.08
CA SPECIAL TAX: $3,490.62
Sales Tax Total: $20,361.96
CA Tire Fee: $7.00
Sub Total: $282,129.96
Cash with Order: $0.00
Balance Due: $282,129.96
Legal Information
For the Construction Product(s)
ACKNOWLEDGMENTS - Purchaser offers to sell, transfer, and convey the item(s) listed as “Trade In” to the Dealer at or prior to the time of delivery of the above Product(s), as a “trade-in” to be applied against the cash price. Purchaser represents that each “trade-in” item shall be free and clear of all security interests, liens, and encumbrances at the time of transfer to the Dealer except to the extent shown below. The price to be allowed for each “trade-in” item is listed on this document. The Purchaser promises to pay the balance due shown hereon in cash, or to execute a Time Sale Agreement (Retail Installment Contract), or a Loan Agreement for the purchase price of the Product(s), plus additional charges shown thereon, or to execute a Lease Agreement, on or before delivery of the Product(s) ordered herein. Despite delivery of the Product(s) to the Purchaser, title shall remain with the Seller until one of the foregoing is accomplished. Except as provided herein and as necessary to protect RDO Equipment from the claims or a bankruptcy trustee or a buyer in the ordinary course or business, the Purchaser and the Dealer agree that this Purchase Order is not a security agreement and that delivery of the Product(s) to the Purchaser pursuant to this Purchase Order will not constitute possession of the Product(s) by the Purchaser, as a debtor, for the purposes of the purchase money security provisions in any statutes relating to personal property security or its equivalent. Purchaser understands that its rights in connection with this purchase are limited as set forth in this Purchase Order. I (we) hereby grant a security interest to RDO Equipment in the Product.
DISCLOSURE OF REGULATION APPLICABILITY - When operated in California, any off-road diesel vehicle may be subject to the California Air Resources Board In-Use Off-Road Diesel Vehicle Regulation. It therefore could be subject to retrofit or accelerated turnover requirements to reduce emissions of air pollutants. More information is available on the California Air Resources Board website at http://www.arb.ca.gov/msprog/ordiesel/ordiesel.htm.
IMPORTANT WARRANTY NOTICE - The Standard Warranty for new John Deere construction and forestry products is set forth in a separate document provided by the dealer.Please read the Standard Warranty carefully before signing. No express warranty is made unless specified in the Warranty Statement. PURCHASER'S RIGHTS AND REMEDIES PERTAINING TO THIS PURCHASE ARE LIMITED AS INDICATED IN THE STANDARD WARRANTY AND PURCHASE ORDER. WHERE PERMITTED BY LAW, NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS IS MADE.
Telematics: Orders of telematic devices include only the hardware. Where available, telematics software, including JDLink™ connectivity service, may be enabled from your local John Deere Operations Center or JDLink website. Please see your authorized John Deere dealer for assistance.
The undersigned purchaser(s) (the “Purchaser”) hereby orders the product (the “Product”) described above from the Dealer. The Dealer shall not be liable for failure to provide the Product or for any delay in delivery if such failure or delay is due to the Dealer's inability to obtain such Product from the manufacturer or supplier or other cause beyond the Dealer's control. The cash price shown above is subject to the Dealer receiving the Product from the manufacturer or supplier prior to any change in price by the manufacturer or supplier and is also subject to any new or increased taxes being imposed upon the sale of the Product after the date of this Purchase Order.
Upon signature of delivery acknowledgment, customer is accepting the equipment, including attachments, in “AS IS” condition, agreeing to notify RDO Equipment Co. within 24 hours of any damages or discrepancies found upon receipt of equipment.
Signature Area
Purchase Order Accepted By:
(Customer's Signature) (Date Accepted)
(Authorized Signature of Dealer) (Date Accepted)
Delivery of Equipment Acknowledgement:
/ /
(Customer's Signature) Date Accepted
Standard Warranty Acknowledgement:
(Delivered On) (Warranty Begins)
Extended Warranty Oil Sampling Acknowledgement:
(Customer's Intials) ({deal owner's title}'s Initials)
D1544210 Page 2 of
7 Equipment Options
Qty Serial Number Year / Make / Model Description
1 TBD 2022 JOHN DEERE 444P 6010DW 444 P WHEEL LOADER
2605 English Decals and Manuals
1010 Standard Wheel Loader
0924 John Deere PowerTech Engine
1520 Automatic Reversing Hydraulic Fan
1430 Engine Air Intake System with Centrifugal Precleaner 1310 Flat Black Curved Stack
1610 Standard Fuel Filter with Water Separator and Standard Fuel Fill 9240 Engine Compartment Light
1210 100 amp Alternator
2708 8 Amp Converter
7120 Halogen Work and Drive Lights
1105 4-Speed Powershift Transmission
3046 Front Hydraulically Locking Differential and Rear Conventional Differential Axles
3110 Automatic Differential Lock
9050 Wheel Spin Control System
2010 Standard Z-BAR
2360 Joystick Controls
2403 Three Function Hydraulics
1970 Hydrau Hydraulic Fluid
2515 Ride Control
1905 Standard Cab
8450 Cab with Air A/C Charge
2220 Deluxe Seat, Cloth with Air Suspension
1945 7 inch Monitor with Dedicated Rear Camera Display
8310 Standard Exterior Mirrors
8360 Standard Radio
8240 Rear Camera
8275 LED Strobe Beacon with Left Beacon Bracket
5610 Left Side Steps Only
9140 Fire Extinguisher
2120 Steering Wheel Only
2890 No Payload Scale without Cycle Counter
170K JDLink™
5530 Standard Front Fenders
4211 Michelin GP, 17.5R25 1 Star L2 Radial Tire On 3pc. Rims 8560 Hydraulic Coupler - JRB 416 Pattern
5760 60 in (1524mm) Wide Fork Frame
5870 60 Inch (1524mm) Construction Tines
8220 Rear Hitch and Counterweight
9410 Transmission and Bottom Guards
9520 License Plate Bracket
9525 Slow Moving Vehicle (SMV) Emblem
1 TBD JRB 2.5YD X 100" GRAPPLE
BUCKET
JRB 2.50yd x 100.5" Grapple Bucket w/ JRB QC 416 Lugging and JD BOCE
1 TBD PALADIN 103" BROOM (8' ANGLE) 103" Paladin 8ft Manual Angle Broom w/ JRB QC 416 Lugging D1544210 Page 3 of
7 US/CAN DEERE Warranty Statement Ver. 9.0 Effective 21 March 2019 Page 1 of 4
STANDARD WARRANTY FOR NEW JOHN DEERE
CONSTRUCTION, UTILITY, CCE AND FORESTRY PRODUCTS – US & Canada
• Construction, Forestry & Compact Construction Equipment (CCE) Products*: 12 months Full Machine Standard Warranty
• * Compact Construction Equipment Products Delivered and settled on or after 01 June 2018: 24 months or 2000 hours (whichever comes first) Full Machine Standard Warranty • C&E Series Pull-Type Scrapers: 6 months Full Machine Standard Warranty • DC & DE Series Pull-Type Scrapers: 12 months Full Machine Standard Warranty • Scraper Tractors: 24 Months or 2000 Hours (whichever occurs first) Full Machine Standard Warranty • Forestry Attachments: 12 Months or 2000 Hours (whichever occurs first) Full Machine Standard Warranty • Frontier Equipment: 6 months Full Machine Standard Warranty (90 days in rental applications) The "Standard Warranty" is part of the warranty protection package available from John Deere Construction & Forestry Company (John Deere Limited in Canada) ("John Deere") to purchasers of new John De ere products ("product"):
STANDARD Warranty is John Deere's standard new product warranty, described in this document, provided at no additional charge to the purchaser.
EXTENDED Warranty is a separate repair contract made available by John Deere for purchasers who wish to complement their Standard Warranty coverage. Complete Extended Warranty details, including coverage options and limitations, are set forth in the Application for Extended Warranty, which is available from authorized John Deere dealers.
STRUCTURALL Warranty applies to certain structural components as listed below and as described in this document.
FACTORY-INSTALLED UNDERCARRIAGE Warranty applies to certain undercarriage components as listed below and as described in this document.
A. STANDARD WARRANTY - GENERAL PROVISIONS
John Deere will repair or replace, at its option, any parts (except those specified below) of a new John Deere product that, as delivered to the original retail purchaser(s), are defective in material or workmanship. Performance of this warranty will be free of charge for parts and labor/labour, except as otherwise stated below. Standard Warranty applies only to purchases from John Deere and authorized John Deere dealers and, except as otherwise provided in the next sentence and section L below, is extended only to the original retail purchaser of the product. Remaining Standard Warranty applicable to a used John Deere product is transferred to a subsequent purchaser of the product only if the subsequent purchaser requests a transfer from an authorized John Deere dealer before the product's Standard Warranty expires. Coverage begins on the date of delivery of the product to the original retail purchaser. For purposes of this warranty, a product that has been rented, used for demonstration purposes for 150 or more hours, or otherwise used prior to its original retail purchase has been "used" for the total duration of such use. Warranty statements required by law covering engine emissions-related parts and components are found on a separate written warranty certificate provided to the purchaser at the time of the original retail purchase.
B. WHAT IS COVERED BY STANDARD WARRANTY -
All parts of a new John Deere product (except those noted in Sections D and E below) are covered during the Standard Warranty period set out above.
C. EXCLUSIVE REMEDY -
The repair or replacement of covered parts or components that are defective, as provided in Sections A, B, D.2 and D.3 herein, shall be the purchaser's exclusive remedy for any defect in the product. However, if after repeated attempts such repair or replacement fails to correct the performance problem caused by the defect, the purchaser's sole remedy shall be a refund of the amount paid for the product (in exchange for a return of the product), excluding any transportation charges, license fees, taxes and insurance premiums, and less a reasonable allowance for use of the product prior to its return. In no event will the dealer, John Deere or any company affiliated w ith John Deere be liable for any incidental or consequential damages, including but not limited to loss of profits, rental of substitute equipment or other commercial loss. Correction of defects in the manner provided above shall constitute fulfillment of all liabilities of the Dealer, John Deere, or any company affiliated with John Deere to the purchaser or any other D1544210 Page 4 of
7 US/CAN DEERE Warranty Statement Ver. 9.0 Effective 21 March 2019 Page 2 of 4 person, whether based upon contract, tort, strict liability, or otherwise. This limitation does not apply to claims for personal injury.
D. ITEMS COVERED SEPARATELY -
1. Standard Warranty does not apply to batteries, radios, tires, cameras, or to Cummins, MTU or Detroit Diesel Engines installed in John Deere products, which are covered by separate written warranties.
2. Factory-Installed Undercarriage Warranty covers all non-rubberized factory-installed undercarriage wear components for 3 years or 4,000 hours from the date of delivery to the original retail purchaser, whichever occurs first (unless terminated earlier under Section F, below). For purposes of this warranty, a product that has been rented, used for demonstration purposes for 150 or more hours, or otherwise used prior to its original retail purchase has been "used” for the total duration of such use. In addition to the items listed in section E below, Factory-Installed Undercarriage Warranty does not cover: failures due to wear, machine application, maintenance practices, or improper machine configuration; removal and installation labor/labour; transportation or hauling costs; unapproved parts; non-wear items; and rubberized undercarriage components such as rubber tracks.
Warranty claims will be pro-rated based upon wear of the failed component and whether track shoe width is approved by John Deere. Factory-Installed Undercarriage Warranty does not apply to Scraper Tractors.
3. StructurALL Warranty for new John Deere Products (except Compact Excavators & Loaders, Skid-Steer Loaders, Compact Track Loaders, Scraper Tractors, Pull-Type Scrapers, and Forestry Attachments, which are not eligible for StructurALL Warranty) begins at the date of delivery to the original retail purchaser and ends (unless terminated earlier under Section F, below) after three (3) years, or 10,000 hours (whichever occurs first). For purposes of this warranty, a product that has been rented, used for demonstration purposes for 150 or more hours, or otherwise used prior to its original retail purchase has been "used” for the total duration of such use.
StructurALL Warranty applies only to the following structural components listed below as installed on the product at the time of original manufacture. If a particular component is not listed below it is not covered by StructurALL Warranty.
Arm; Articulation Joint (incl. pins & bushings); Bin Frame; Boom; Carbody; C-Frame*; Circle Frame; Coupler (John Deere built ONLY); Dipperstick; Draft Frame; Engine Frame; Equipment Frame; Grapple Arch and Grapple Boom; Loader Arm; Loader Frame; Mainframe; Moldboard Lift Arm; NeverGrease™ Pin Joints [Includes steering pin and bushing joints (standard equipment), roller elements (roller bearings) in bucket to boom joints and sliding elements (bushing) for boom and linkage joints (optional equipment)]; Rollover Protection Structure (ROPS); Side Frame; Swing Frame; Track Frame; Undercarriage Frame; X-Frame; Z-bar loader linkage (including bell crank and bucket driver link); Specialty booms and arms marketed as "heavy duty" by John Deere.
Items Covered by StructurALL for Cut-to-Length Forestry Machines: Front frame (welded assembly); Rear frame (welded assembly); Crane king post with basement; Middle joint frame; Cabin swing frame; Main Boom
StructurALL Warranty does not apply to:
1. Any product used primarily in extreme duty or severe duty applications such as but not limited to:
demolition and wrecking, chemical plant (including fertilizer plants), salt mines, steel mill, land fill and transfer stations, scrap handling, scarifying and other applications that are similarly destructive or similarly heavy duty except specialty booms and arms as stated in Section D.3 above.
2. C-Frames on H-Series & J-Series Crawlers equipped with root rakes or used in forestry applications unless equipped with an "extreme duty” reinforcement package.
3. Cut-to-Length Forestry Heads and Slash Bundler Units.
4. Crawlers equipped with optional side booms.
5. Cut-to-Length Forestry, Excavator, and Log Loader swing bearings.
6. Motor Graders equipped with front- or rear-mounted snow wings.
D1544210 Page 5 of
7 US/CAN DEERE Warranty Statement Ver. 9.0 Effective 21 March 2019 Page 3 of 4
E. ITEMS NOT COVERED -
John Deere is NOT responsible for the following:
1. Freight
2. Adjustments to compensate for wear, for periodic maintenance or adjustments that result from normal wear and tear.
3. Damage caused by unapproved adjustments (electronic or mechanical) to machine or machine components outside of published specifications including but not limited to engine, hydraulic components and relief valves.
4. Program updates, calibrations, and pressure adjustments.
5. Diagnostic Time
6. Additional Labor/Labour Time - Above SPG/Labor/Labour Rate
7. Additional Cleaning - Above SPG/Labor/Labour Rate
8. Rental Fees
9. Depreciation or damage caused by normal wear or application, lack of reasonable and proper maintenance, failure to follow operating instructions, misuse, negligence, collision or other accidents.
10. Premiums charged for Overtime Labor/Labour
11. Transportation to and from the dealership.
12. Travel time, mileage or service calls by the dealer.
13. Non-John Deere components or modifications, Rotobec grapples, and attachments installed aftermarket.
14. Shop supplies and maintenance items such as, but not limited to: filters, fuels, oil, hydraulic fluid, lubricants, coolants, conditioners, shop towels, cleaners and degreasers. Note: Reimbursement for refills of oils/coolants lost due to a warrantable failure is covered when a system failure occurs outside the boundaries of a normal oil change (within 25% of specified change interval as provided in the Operator's Manual).
15. Torn, cut, or worn hoses.
16. Wear items, such as, but not limited to: body liner, belts, blades, bulbs, lubricated joints (including pins and bushings), dry brakes, brake linings, dry clutch linings, saw blades, chains, skidder grapple shocks, color marking nozzles, and articulation bumpers.
17. Items such as cutting-edge parts, delimbing knives, bucket teeth and rubber track are not warranted for depreciation or damage caused by normal wear, lack of proper maintenance, misuse, failure to follow operating instructions, the elements or accident.
18. Any defect in a non-covered component, or damage to or failure of a covered component caused by a defect in a non-covered component.
19. Secondary damage which occurs from continued operation of a product after recognition of the occurrence of a failure.
20. Parts supplied or modifications done by third party suppliers.
21. Topping off fluids when fluid levels fall in the range between low and full
22. Parts/Kits not ordered on machine and installed aftermarket. These parts will be covered by any applicable parts warranty.
23. Attachments installed aftermarket – i.e. Winch not installed at factory.
24. Custom options installed outside the factory – i.e. G.R. Manufacturing option packages.
25. Used Products (except as otherwise provided in section L below).
F. TERMINATION OF WARRANTY-
John Deere is relieved of its obligations under Standard Warranty, StructurALL Warranty, Factory-Installed Undercarriage Warranty and/or Extended Warranty if:
1. Service (other than normal maintenance and replacement of service items) is performed by someone other than an authorized John Deere dealer; or
2. The product is modified or altered in ways not approved by John Deere; or
3. Any unapproved or improperly sized attachment is installed on the product. Approval and attachment size shall be at John Deere's sole discretion. (Consult dealer prior to installing attachments or product modification).
4. The product is moved outside the US and/or Canada.
G. PARTS REPLACED UNDER WARRANTY -
Only new or remanufactured parts or components furnished or approved by John Deere, will be used if John Deere elects to repair the product. If any such part or component is defective in material or workmanship when installed in the product, John Deere will repair or replace, as it elects, such defective part or component, provided the defect is D1544210 Page 6 of
7 US/CAN DEERE Warranty Statement Ver. 9.0 Effective 21 March 2019 Page 4 of 4 reported to an authorized John Deere dealer within 90 days of installation or before expiration of the applicable Standard Warranty, Factory-Installed Undercarriage Warranty and/or StructurALL Warranty whichever is later.
H. TELEMATICS
NOTICE: Products may be equipped with telematics hardware and software (“Telematics”) that transmit data to John Deere/ Dealer. Purchaser may deactivate Telematics at www.jdlink.com.
Notwithstanding Purchaser’s right, title or interest in the Products, Purchaser agrees that John Deere and Dealer (their affiliates, successors and assigns), without further notice to Purchaser have the right to:
1. Access, use, collect and disclose any data generated by, collected by, or stored in, Products or any hardware or devices interfacing with Products (“Machine Data”);
2. Access Machine Data directly through data reporting devices integrated within, or attached to, Products, including Telematics (“Data Reporting Systems”); and
3. Update the Data Reporting Systems software from time to time. Machine Data will only be used in accordance with John Deere’s Machine Data Policy, located at www.JohnDeere.com/MachineDataPolicy.
I. OBTAINING WARRANTY SERVICE -
To obtain warranty service, the purchaser must request warranty service from a John Deere dealer authorized to sell the product to be serviced. When making such a request, the purchaser must present evidence of the product's delivery date, make the product available at the dealer's place of business, and inform the dealer in what way t he purchaser believes the product to be defective. Standard Warranty, Factory-Installed Undercarriage Warranty and/or StructurALL Warranty repairs may be made in the field if the purchaser and servicing dealer so desire. However, John Deere will not be responsible for any charges (such as dealer travel time, mileage or extra labor /labour) that would not have been incurred had the product been repaired at the dealer's place of business.
J. NO IMPLIED WARRANTY, CONDITIONS OR OTHER REPRESENTATION - Where permitted by law, neither John Deere nor any company affiliated with it makes any warranties, representations, conditions or promises, express or implied, as to the quality, performance, or freedom from defect of its products, other than those set forth in this document and NO IMPLIED WARRANTY OF MERCHANTABILITY, CONDITIONS OR FITNESS IS MADE.
K. NO DEALER WARRANTY -
The selling dealer makes no warranty of its own on any item covered by this warranty, and makes no warranty on other items unless the dealer delivers to the purchaser a separate written warranty certificate specifically warranting the item. The dealer has no authority to make any representation or promise on behalf of John Deere, or to modify the terms or limitations of this warranty in any way.
L. USED JOHN DEERE PRODUCTS ONLY -
John Deere will transfer remaining Standard Warranty, Factory-Installed Undercarriage Warranty and/or StructurALL Warranty to the purchaser of a used John Deere construction and/or forestry product that has been used for less than the full warranty period provided at the product's original retail purchase. This transfer is not effective until change of ownership is registered by a John Deere dealer. ALL THE TERMS, INLCUDING LIMITATIONS AND EXCLUSIONS,
OF THE JOHN DEERE STANDARD WARRANTY, FACTORY-INSTALLED UNDERCARRIAGE WARRANTY,
AND/OR STRUCTURALL WARRANTY ORIGINALLY PROVIDED FOR THE PRODUCT REMAIN IN EFFECT AND APPLICABLE.
D1544210 Page 7 of
7