670 West Ave L-8 Lancaster, CA 93534 (661) 945-3621
BID RESULTS – AWARDED
Bid Title: EV Charging Equipment
Bid Number: RPF Bid #26-002
Award Date: __February 6th 2026__________________
Awarded Vendor
Vendor Name: ___A-Z Bus Sales, Inc._________________
Address: __1900 S. Riverside Ave, Colton, CA 92324__________________ Contact / Email: _Brandon Bluhm – COO/ [email protected]___________________ Award Summary
Total Award Amount: $_850,300.00 + Tax $87,155.75___________________ Contract Term: _1-Year with up to four additional one-year periods. (total of 5- Years).___________________
Brief Description of Equipment:
__One Dual port DCFC (one or more), One AC Level 2 Single port (one or more), One Mobile Electric Charging Trailer (one or more) and Other available options ________________________________________ Bid Results
Vendor Name Bid Amount Notes
1. A-Z Bus Sales, Inc. $850,300.00 + tax Comply with no exceptions noted.
Approval
Prepared By: __David Castillo__________________ Date: __February 6th, 2026________ Approved By: _____Morris Fuselier III_______________ Date: __February 11th, 2026________
3 EV CHARGING EQUIPMENT
RE
QUIRED FORMS
P
lease include this sheet with your bid proposal.
B
id Documents Due at the Submission of the Bid
☐ B
id Quotation Sheet
☐ Bid Proposal Form
☐ Acknowledged Addenda (if any)
☐ Non-Collusion Affidavit
☐ Certification Regarding Debarment, Suspension, Ineligibility, and Voluntary Exclusion ☐ Equal Opportunity Employment
☐ Statement Regarding Insurance Coverage
☐ Workers’ Compensation Certification
☐ Iran Contracting Act Certificate
O
ther Forms Not Required Until After Award of Bid
☐ A
greement
☐ Drug-Free Workplace Certification
☐ IRS Form W-9
☐ Certificates of Required Insurance / Endorsements
17 SPECIFICATIONS
SPECIFICATION
BIDDER'S RESPONSE -
MUST COMPLY OR STATE
DEVIATIONS IN FULL
Specifications that follow are minimum basic requirements. Bidder must list any deviations from these specifications. If bidder claims item "Meets or Exceeds" specifications, documentation must be provided with bid to substantiate claim.
Failure to do so will result in rejection of your bid and/or product for non-compliance.
ELECTRIC BUS EV CHARGING EQUIPMENT
Provide submittals for items listed documenting compliance with specification requirements.
a. Materials and Services
b. Tests and Commissioning Plans
c. Tests and Commissioning Results
d. Operation and Maintenance Manual
e. Product Data: Manufacturer’s data sheets on each product to be used, including preparation instructions and
recommendations.
f. Storage and handling requirements and recommendations. g. Installation methods.
TECHNICAL SPECIFICATIONS FOR ELECTRIC BUS EV
CHARGING EQUIPMENT
A) ALL-IN-ONE DUAL DCFC – One (or more)
Charging station(s) is a SAE J1772 CCS1/NACS dual port
plug-in style system with capability for mounting on concrete pad, 60 kW DCFC. The unit complies with all J1772
standards and is capable of providing up to 150A DC to the vehicle. Grid connection should be 480 VAC, three phase, 60 Hz. LED status indicators for troubleshooting.
B) SINGLE EVSE AC LEVEL 2 – One (or more)
Charging station(s) is a SAE J1772 plug-in style system with capability for mounting on pedestal, 19.2 kW EVSE. The unit complies with all J1772 standards and is capable of providing up to 80 Amps of AC to the vehicle. Grid connection should be 208-240 VAC, single phase, 60/50 Hz. LED status
indicators for troubleshooting.
C) MOBILE ELECTRIC BUS CHARGING TRAILER –
One (or more.)
Mobile charging trailer with five (5) single 30kw
CCS1/NACS ports, 120-gallon propane fuel tank. Capable of charging five vehicles at once.
YEAR:
PRODUCT#:
MODEL#:
CHARGING
RATE:
YEAR:
PRODUCT#:
MODEL#:
CHARGING
RATE:
YEAR:
PRODUCT#:
MODEL#:
CHARGING
RATE:
COMPLY
2026 or Newer
A-Z Connect By Autel
UF060A3001
60kW Single use or
30kW Dual use
2026 or Newer
A-Z Connect By Autel
UF19C001
19.2kW at 240 volts
2026 or Newer
A-Z Connect By Pioneer
e-Boost - 180kW
30kW each port - Six
total charging ports.