Rev. 02-26
CITY OF SAN CLEMENTE
ELECTRICAL INSTRUMENTATION TECHNICIAN - Trainee, I/II
DEFINITION
To perform a variety of routine, semi-skilled, skilled, and highly skilled assignments in the maintenance, repair and installation of electrical equipment including water and sewer systems, data radio systems, and electronic monitoring systems; to overhaul, construct and salvage electrical machinery and equipment; and to perform a variety of tasks relative to assigned area of responsibility.
DISTINGUISHING CHARACTERISTICS
Work assignments are allocated in recognition of the scope and difficulty of the work assignments, and the certification levels of employees:
Electrical Instrumentation Technician Trainee - This is the trainee-level classification in the Electrical Instrumentation Technician series. Positions in this class perform assigned duties while learning the trade under close supervision. Work assignments are limited in scope and complexity and are performed in accordance with established procedures. Advancement to the Electrical Instrumentation Technician I level is based upon successful performance, acquisition of required certifications, and supervisory recommendation. Employees in this classification are expected to advance to Electrical Instrumentation Technician I level within twenty-four (24) months of appointment. Failure to successfully demonstrate required proficiency or meet the qualifications for advancement within the specified timeframe may result in reassignment or separation from employment.
Electrical Instrumentation Technician I - This is the entry-level class in the Electrical Instrumentation Technician series reflecting work performed under closer supervision and procedural controls. Positions at this level have prior experience but are not expected to function with the same amount of program knowledge or skill level as positions allocated to the Electrical Instrumentation Technician II level and exercise less independent discretion and judgment in matters related to work procedures and methods.
Work is usually supervised while in progress and fits in an established structure or pattern.
Electrical Instrumentation Technician II - This is the full journey level class in the Electrical Instrumentation Technician series reflecting the full range of semi-skilled and journey-level duties with only occasional instruction or assistance. Positions at this level are distinguished from the Electrical Instrumentation Technician I level by the performance of the full range of duties as assigned, working independently, and exercising judgment and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. Work is normally reviewed at critical points of assigned project for soundness of technical judgment and to determine if desired overall objectives have been achieved.
Positions in this class series are flexibly staffed and positions at the Electrical Instrumentation Technician II level are normally filled by advancement from the Electrical Instrumentation Technician I level.
Advancement to the “II” level is based on demonstrated proficiency in performing the assigned functions, appropriate certification, and the discretion of supervisory or management staff.
Attachment 5
Rev. 02-26
SUPERVISION RECEIVED AND EXERCISED
Electrical Instrumentation Technician Trainee, I
Under close supervision from the Senior Electrical Instrumentation Technician or higher.
Electrical Instrumentation Technician II
Under general supervision from the Senior Electrical Instrumentation Technician or higher.
ESSENTIAL FUNCTION STATEMENTS -
Class specifications are intended to present a descriptive list of the range of duties performed by employees in the class. Specifications are not intended to reflect all duties performed within the job.
Essential and other important responsibilities and duties may include, but are not limited to, the following:
Electrical Instrumentation Technician Trainee
1. Assist in the maintenance, repair, and installation of electrical and electronic equipment.
2. Assist with troubleshooting and repair of electrical and instrumentation systems.
3. Learn to read and interpret blueprints, schematics, and diagrams.
4. Assist in maintaining tools, equipment, and work areas.
5. Learn safety practices and procedures applicable to electrical work.
6. Participate in training related to electrical theory, instrumentation and system maintenance.
7. Assist higher-level technicians with installations and repairs.
8. Perform related duties as assigned.
Electrical Instrumentation Technician I/II
1. Perform a variety of functions in the repair, maintenance, installation and construction of electrical machinery, equipment and systems, including water and sewer systems and data radio systems.
2. Plan, prioritize and participate in the more complex electrical projects, including overhauling construction and salvaging electrical machinery and equipment.
3. Install underground cable and other electrical devices; install conduits in buildings and underground; install service entrance equipment for all voltages and phases.
4. Install reservoir level controls; calibrate reservoir levels.
5. Repair and maintain data radio communication systems, including booster stations; install systems and set up computer base; troubleshoot system problems.
Rev. 02-26
6. Read and interpret blueprints and schematic drawings; locate, identify and mark underground utilities; locate and upgrade code infractions.
7. Operate a bucket truck, pneumatic tools, trenchers, diggers, compressors and small power tools.
8. Estimate time, materials and equipment required to complete assigned jobs; requisition materials as required.
9. Respond to after hour electrical emergencies. A 30-minute response time is required.
10. Perform related duties and responsibilities as required.
QUALIFICATIONS
Knowledge of:
• Principles and practices of electrical construction.
• Techniques and procedures of skilled maintenance.
• Occupational hazards and standard safety practices necessary in the area of work assigned. • Basic principles of mathematics.
• Electrical theory and practices.
• Properties and principles of electricity and the National Electrical Code. • Methods, materials and techniques used in the construction and maintenance of electrical and electronic systems.
• Operational characteristics of mechanical and hydraulic equipment and tools used in the installation, maintenance and repair of electronic systems. • Electronic systems repair and preventative maintenance techniques and procedures. • Independently perform the most difficult skilled maintenance and repair work related to electronic systems and components, and the electrical field.
Ability to:
• Learn properties and principles of electricity and the National Electrical Code. • Learn methods, materials and techniques used in the construction and maintenance of electrical and electronic systems.
• Learn operational characteristics of mechanical and hydraulic equipment and tools used in the installation, maintenance and repair of electronic systems. • Learn electronic systems repair and preventative maintenance techniques and procedures. • Operate a variety of vehicular and stationary equipment in a safe and effective manner. • Use and operate hand tools, mechanical equipment and power tools and equipment in a safe and efficient manner.
• Read and interpret electronic schematics, diagrams, drawings and plans. • Understand and follow oral and written instructions and sketches. • Communicate effectively, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Maintain effective audio/visual discrimination and perception to the degree necessary for the successful performance of assigned duties.
• Maintain mental capacity which allows the capability of making sound decisions and Rev. 02-26
demonstrating intellectual capabilities.
• Troubleshoot and solve electronic system defects.
• Interpret, explain and enforce Division policies and procedures. • Work independently in the absence of supervision.
Experience and Training
Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be:
Electrical Instrumentation Technician Trainee
Experience:
Prior experience in mechanical, electrical, construction, industrial maintenance, or a related field in a water, wastewater, public works, industrial or similar operational environment.
Education/Training:
High School Diploma or equivalent and at least 12 units of coursework or trade school training in electrical and/or instrumentation technology or related field.
License or Certificate:
Possession of a valid class C California’s driver’s license Special Requirements:
Continued employment in the Electrical Instrumentation Technician classification series is contingent upon satisfactory progress toward meeting the minimum qualifications of the Electrical Instrumentation Technician I classification, including attainment of required certifications, within twenty-four (24) months of appointment.
Electrical Instrumentation Technician I
Experience:
Two years of experience maintaining, repairing, and installing electrical equipment or two years of experience as an Electrical Instrumentation Technician Trainee at the City of San Clemente.
Education/Training:
High School Diploma or equivalent, supplemented by college level course work or trade school training in electrical technology or a related field.
License or Certificate
Possession of , or the ability to obtain, a valid Grade I Plant Maintenance Technologist Certificate from the California Water Environment Association (CWEA) within 12 months of employment.
Possession of a valid Class C California driver’s license.
Rev. 02-26
Electrical Instrumentation Technician II
Experience:
Three years of increasingly responsible experience maintaining, repairing, and installing electrical equipment at a level comparable to an Electrical Technician I with the City.
Education/Training:
High School Diploma or equivalent, supplemented by college level course work or trade school training in electrical technology or a related field.
License or Certificate
Possession of or ability to obtain, a valid Grade II Electrical/Instrumentation Technologist Certificate from CWEA within 12 months of employment.
Possession of a valid Class C California driver’s license.
WORKING CONDITIONS
Environmental Conditions:
Inside and outside environment; travel from site to site; exposure to noise, dust, grease, smoke, fumes, gases, electrical energy, toxic materials, and inclement weather conditions.
Physical Conditions:
Primary functions require sufficient physical ability to walk, stand, stoop, bend, crawl, climb, and kneel; to perform heavy, moderate, or light lifting, pulling and carrying; and to operate assigned equipment and vehicles.