Form Name: Amendment to Master Consultant Agreement – RWF Capital Projects Page: 1 of 4 Form/File No.: T-40716\2059976
City Attorney Approval Date: February 2023
First Amendment to Master Consultant Agreement – RWF Capital Projects
Consultants Name: Construction Testing Services, Inc.
(CPMS Contract No. 8753-1)
(Master Agreement AC No. 29373)
Second
Third
This Amendment to the Master Agreement is made and entered into this ___________________. The City and the Consultant amend the above-referenced agreement as set forth herein.
1. Capitalized words in this Amendment have the same meaning as in the Master Agreement.
2. The provisions of this Master Agreement (including any previous amendments) not modified by this Amendment remain in full force and effect.
3. The provisions of this Amendment are effective upon execution of the Amendment by both parties.
4. Agreement Term: Section 2 is amended to extend the expiration date from ___ 12/31/2023___ to ___12/31/2026___.
5. Maximum Total Compensation: Subsection 10.1 is amended to Increase Decrease the Maximum Total Compensation from $___________________ to $___________________.
6. Agreement Section(s): Section(s) ______2_____ is/are amended to read as set forth in Attachment A of the Amendment.
7. Basis of Compensation – Exhibit B: The original First Revised Second Revised Exhibit B is amended to read as set forth in the attached First Second Third Revised Exhibit B, which is incorporated by reference into this Amendment.
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
CPMS Contract No. 8753-1
Master Agreement AC No. 29373
Consultant: Construction Testing Services, Inc.
Form Name: Amendment to Master Consultant Agreement (Capital Projects) Form/File No.: T-40716\2059976
City Attorney Approval Date: October 2015
Page: 2 of 4
This Amendment is executed by the authorized representatives of the City and Consultant as follows:
City of San José
By
Name: Toni J. Taber
Title: City Clerk
Consultant
By
Name: Patrick Greenan
Title: President/Principal-in-Charge
Approval as to Form (City Attorney):
Form Approved by the Office of the City Attorney.
(Maximum Total Compensation, as amended, is $100,000 or less, and the provisions of the form are not altered.)
Approved as to Form:
By:
Name: Rosalía Burgueño Tapia
Title: Sr. Deputy City Attorney
By
Name: Aaren Solis
Title: Vice President of Business Development
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
CPMS Contract No. 8753-1
Master Agreement AC No. 29373
Consultant: Construction Testing Services, Inc.
Form Name: Amendment to Master Consultant Agreement – RWF Capital Projects Page: 3 of 4 Attachment A: Agreement Provisions Amendment
Form/File No.: T-40716\2059976
City Attorney Approval Date: February 2023
First
Attachment A
Agreement Provision Amendment(s)
Second
Third
This Attachment A is an attachment to the First Second Third amendment to Master Agreement.
The Section(s) set forth in the original Master Agreement, or in any previous amendment to the original Master Agreement, is/are amended as follows:
2. Agreement Term
The term of this master agreement is from the contract date to December 31, 2026, inclusive, unless terminated earlier pursuant to Section 19 below.
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
CPMS Contract No. 8753-1
Master Agreement AC No. 29373
Consultant: Construction Testing Services, Inc.
Form Name: Amendment to Master Consultant Agreement – RWF Capital Projects Page: 4 of 4 Revised Exhibit B: Basis of Compensation
Form/File No.: T-40716\2059976
City Attorney Approval Date: February 2023
First
Revised Exhibit B: Basis of Compensation Second
Third
This revised Exhibit B is an attachment to the First Second Third amendment to Master Agreement.
The basis of compensation set forth in the original Exhibit B, or in any previous amendment to the original Exhibit B, is amended as follows:
Effective January 1, 2024: Hourly rates for field inspections increased. Rate increases are aligned with prevailing wage increases for 2024, 2025, and 2026. See updated fee schedule on following pages.
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document. 2023 2024 2025 2026
* FIELD INSPECTION AND LABORATORY SERVICE Rate/Hour Rate/Hour Rate/Hour Rate/Hour Steel $114.00 $117.42 $120.94 $124.57
Nondestructive - UT, MT, PT $119.00 $122.57 $126.25 $130.03 Steel Visual/UT Combination $119.00 $122.57 $126.25 $130.03 Concrete ACI $114.00 $117.42 $120.94 $124.57
Concrete ICC $114.00 $117.42 $120.94 $124.57
Masonry $114.00 $117.42 $120.94 $124.57
Fireproofing $114.00 $117.42 $120.94 $124.57
Soil Technician w/Nuclear Gauge and/or Sand Cone (portal-to-portal) $119.00 $122.57 $126.25 $130.03 Asphalt Technician (portal-to-portal) $218.00 $224.54 $231.28 $238.21 Shoring/Soldier Piers $218.00 $224.54 $231.28 $238.21
Roofing & Waterproofing $218.00 $224.54 $231.28 $238.21 Multi-Disciplined Inspector $218.00 $224.54 $231.28 $238.21 Inspector Requiring G1 Pay Grade $253.00 $260.59 $268.41 $276.46 Specialty Inspector or Where Formal Certification is Required $218.00 $224.54 $231.28 $238.21 Field Inspector with Special Enhancement $218.00 $224.54 $231.28 $238.21 Laboratory Technician $218.00 $224.54 $231.28 $238.21
Technician Typist $218.00 $224.54 $231.28 $238.21
**PROFESSIONAL ENGINEERING SERVICES Rate/Hour
Principal Engineer (Civil/Structural) $350.00 $360.50 $371.32 $382.45 Geotechnical Engineer $300.00 $309.00 $318.27 $327.82
Consulting Engineer (Civil/Structural) $270.00 $278.10 $286.44 $295.04 Associate Engineer, Licensed $245.00 $252.35 $259.92 $267.72 Project Manager $215.00 $221.45 $228.09 $234.94
Staff Engineer $215.00 $221.45 $228.09 $234.94
Field Supervision $190.00 $195.70 $201.57 $207.62
ASNT Level III $205.00 $211.15 $217.48 $224.01
Drafting $150.00 $154.50 $159.14 $163.91
Quality Control Manager QOR QOR QOR QOR
SPECIAL SERVICES Rate/Hour
Portable and Mobile Laboratories, NDT and Soils QOR QOR QOR QOR Rescue Team with Equipment, 3 Person Crew Daily Rate (does not include overtime) $2,700.00 $2,781.00 $2,864.43 $2,950.36 * Epoxy Bolt/Expansion Anchor - Installation Observation $178.00 $183.34 $188.84 $194.51 * Epoxy Bolt/Expansion Anchor Proof Load Testing (portal-to-portal) $178.00 $183.34 $188.84 $194.51 * Coring, 1 Person (including equipment) (portal-to-portal) $275.00 $283.25 $291.75 $300.50 * Coring, 2 Persons (including equipment) (portal-to-portal) $440.00 $453.20 $466.80 $480.80 * Asphalt Coring (portal-to-portal) $300.00 $309.00 $318.27 $327.82 Project Research QOR QOR QOR QOR
Ultrasonic Testing for Non-Metallic Materials QOR QOR QOR QOR Pavement Rehabilitation Analysis Using Deflections QOR QOR QOR QOR Roof Moisture Survey QOR QOR QOR QOR
Soil Drilling Equipment QOR QOR QOR QOR
Geotechnical Site Investigations/Foundation Reports QOR QOR QOR QOR Pachometer, Schmidt Hammer, Windsor Probe (portal-to-portal) $285.00 $293.55 $302.36 $311.43 Floor Flatness Testing FF/FL - Equipment Fee $110/Day (portal-to-portal) $285.00 $293.55 $302.36 $311.43 Measuring Moisture Vapor Emission Rate (Calcium Chloride) - $50/Kit (portal-to-portal) ASTM F1869 $285.00 $293.55 $302.36 $311.43 Relative Humidity Testing - $70/Kit (portal-to-portal) ASTM F2170 $285.00 $293.55 $302.36 $311.43 Ferroscan - Equipment Fee $110/day (portal-to-portal) $285.00 $293.55 $302.36 $311.43 GPR - Equipment Fee $110/day (portal-to-portal) $340.00 $350.20 $360.71 $371.53 Administration, Secretarial, Special Projects, Notary, Certified Payroll/ $160.00 $164.80 $169.74 $174.84 Concrete/Grout/Mortar Mix Design Review (less than 48 hours notice - $500) each $300.00/each $309.00/each $318.00/each $328.00/each Welding Procedure Review (less than 48 hours notice - $500) each $300.00/each $309.00/each $318.00/each $328.00/each Welder Qualification Test (each) $230.00 $236.90 $244.01 $251.33 DSA Interim Reports (each) $175.00 $180.25 $185.66 $191.23 Geotechnical Pad Letter (less than 48 hours notice - $500) each $340.00 $350.20 $360.71 $371.53 Final Letter (less than 48 hours notice - $500) each $300.00/each $309.00/each $318.00/each $328.00/each
EXPERT WITNESS TESTIMONY
Court appearance, per day $2,200.00 $2,266.00 $2,333.98 $2,404.00 Court appearance, per half day $1,100.00 $1,133.00 $1,166.99 $1,202.00 2024-2026 FEE SCHEDULE - P13520 8/22/23
PERSONNEL FEES AND BASIS OF CHARGES
INSPECTIONS, ENGINEERING & SPECIAL SERVICES
* Field inspection services will be billed in accordance with minimums shown on Basis of Charges. **Professional engineering services and laboratory technician services will be billed at actual time.
INSPECTING
TESTING
ENGINEERING
All fees subject to Basis of Charges
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
INSPECTING
TESTING
ENGINEERING
GENERAL
MINIMUM HOURLY CHARGES – INSPECTION
Technician personnel and the following minimum charges are contractual commitment:
One-half day or less 4 Hours
Over one-half day 8 Hours
Show-up time (less than 2 hours notice = 4 hour charge) 2 Hours
WORKING HOURS AND PREMIUM TIME
Regular workday is the first 8 hours between 6:00am and 6:00pm Monday through Friday. Premium time is as follows:
Overtime, Weekdays and Saturdays (first 8 hours) 1.5x quoted hourly rate Overtime Saturdays (over 8 hours) and Sundays (first 8 hours) 2x quoted hourly rate Overtime Sundays (over 8 hours) and Holidays 3x quoted hourly rate Shift differential, swing and graveyard - 12.5%/hour additional to base or quoted rate. (work performed between 2:00pm and 4:00am)
MISCELLANEOUS CHARGES - Only Where Applicable
Notary Services Fee $35.00/each
Facsimile Charges. Plus $1.00/page (n/c for cover page) $6.00/minimum Wireless Router/Data Card for Jobsite Internet $130.00/day Parking Fees At Cost
Air Travel In confromance with MCA 10.5.3
Outside Consultants Cost Plus 5%
Other Services Cost Plus 10%
Subsistence (per union contract for travel outside of Northern CA) $120.00/day Mileage Standard Federal Rate/In confromance with MCA 10.5.3 Sample Pickup $15.00/each
Project Administration/EADOC daily/weekly/lab reporting 8% of Monthly Invoice Samples Made by Others: Concrete Cylinders $120 + Test
Samples Made by Others: All Other Tests $50.00 + Test
Laboratory Sample Witness Fee $120.00
Laboratory Sample Storage Fee (per sample) $110.00
EZ Cure Boxes (Thermostatically Controlled Curing Boxes) QOR Returned Check Fee $120.00
TESTS
BASIS OF CHARGES
Testing fees shown include normal time for performing test. Samples requiring special preparation will be charged at the laboratory technician rate. Fees for tests not listed will be quoted upon request. There will be a minimum charge of $100.00 for any engineering report. Please note some tests maybe tested by subconsultants. Compensation for subconsultants must confirm to MCA 10.6 and all subs must be approved by the City in service orders.
Fees for tests and inspection include cost of technician, normal equipment and regular reports. Engineering services will be charged at applicable rates and will require travel and mileage charges for equipment transport and storage per code (portal to portal) from the nearest CTS laboratory. Soils testing with nuclear gauge and/or sand cone equipment and inspections requiring equipment will require applicable travel and mileage charges for equipment transport and storage per code (portal-to-portal) from the nearest CTS laboratory. Fees for special projects, services overseas, or elsewhere in the United States, will be quoted on request.
All fees subject to Basis of Charges
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
INSPECTING
TESTING
ENGINEERING
Standard 2024 2025 2026
CONCRETE Rate/Each Rate/Hour Rate/Hour Rate/Hour
Compressive Strength of Cylindrical Concrete Specimens (6x12) ASTM C39 $75.00 $75.00 $75.00 $75.00 Compressive Strength of Cylindrical Concrete Specimens (4x8) ASTM C39 $75.00 $75.00 $75.00 $75.00 Compressive Strength of Cylindrical Concrete Specimens (Over 8000 PSI) ASTM C39 $130.00 $130.00 $130.00 $130.00 Cylinder molds. 6” x 12” and 4" x 8" ASTM C470 $65.00 $65.00 $65.00 $65.00 Compressive Strength of Lightweight Insulating Concrete ASTM C495 $85.00 $85.00 $85.00 $85.00 Obtaining and Testing Sawed Beams and Drilled Cores of Concrete (Cores) ASTM C42 $110.00 $110.00 $110.00 $110.00 Flexural Toughness of Fiber Reinforced Concrete (Round Panel) ASTM C1550 $400.00 $400.00 $400.00 $400.00 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) ASTM C78 $280.00 $280.00 $280.00 $280.00 Flex Beams per Caltrans Test Methods CT523 and CT524 $280.00 $280.00 $280.00 $280.00 Length Change of Hardened Hydraulic-Cement Mortar and Concrete (Shrinkage, 1 Sample) ASTM C157 $135.00 $135.00 $135.00 $135.00 Shotcrete Nozzleman Qualification Letter (Per Nozzleman, Per Position) C1140 $400.00 $400.00 $400.00 $400.00 Shotcrete Pre-Qualification Cores (Compression and Visual) C1140 $100.00 $100.00 $100.00 $100.00 Shotcrete Production Cores ASTM C1140 $100.00 $100.00 $100.00 $100.00 Coefficient of Thermal Expansion AASHTO T336 $485.00 $485.00 $485.00 $485.00 Determining Density of Structural Lightweight Concrete (Cylinders) ASTM C567 $365.00 $365.00 $365.00 $365.00 Standard Specification for Concrete Made by Volumetric Batching and Mixing ASTM C685 $875.00 $875.00 $875.00 $875.00 Cement Quality Sampling CBC 2010 $605.00 $605.00 $605.00 $605.00 Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete ASTM C472 $50.00 $50.00 $50.00 $50.00 Splitting Tensile Strength of Cylindrical Concrete Specimens ASTM C496 $230.00 $230.00 $230.00 $230.00 Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression ASTM C469 $195.00 $195.00 $195.00 $195.00 Grab Sample, Sealing and Storing in a Humidity and Temperature Controlled Room CBC $135.00 $135.00 $135.00 $135.00 Density of Hydraulic Cement ASTM C188 $175.00 $175.00 $175.00 $175.00 Testing of Controlled Low Strength Material (CLSM) Test Cylinders ASTM D4832 $135.00 $135.00 $135.00 $135.00 GFRC Pull Test PCI $340.00 $340.00 $340.00 $340.00
GFRC Flexural Test PCI $340.00 $340.00 $340.00 $340.00
Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam (Cell-Crete) ASTM C796 $475.00 $475.00 $475.00 $475.00
MASONRY
Compressive Testing of Grout (Masonry) ASTM C1019 $110.00 $110.00 $110.00 $110.00 Compressive Strength of Hydraulic Cement Mortars Using 2" Cube Specimens ASTM C109 $110.00 $110.00 $110.00 $110.00 Compressive Strength of Masonry Prisms ASTM C1314 $170.00 $170.00 $170.00 $170.00 Testing Concrete Masonry Units and Related Units (Core Compression) CBC 2105A.4 $170.00 $170.00 $170.00 $170.00 Compressive Strength of Molded Masonry Mortar Cylinders and Cubes (2" Sample) ASTM C780 A7.6 $110.00 $110.00 $110.00 $110.00 Testing Concrete Masonry Units (CMU) and Related Units (Full Unit) ASTM C140 $165.00 $165.00 $165.00 $165.00 Linear Drying Shrinkage of Concrete Masonry Units (Per Unit) ASTM C426 $245.00 $245.00 $245.00 $245.00 Masonry Core Shear Testing CBC 2105A.4 $245.00 $245.00 $245.00 $245.00 Testing Concrete Masonry Units (Absorption, Moisture Content, Unit Weight) ASTM C140 $305.00 $305.00 $305.00 $305.00 Brick and Clay Tile (modulus of rupture, compression, saturation coefficient, suction rate, efflorescence)* ASTM C67 $905.00 $905.00 $905.00 $905.00 Mortar Molds. 2” x 4”. Single Use $110.00 $110.00 $110.00 $110.00 Mortar or Grout, Stored and Cured, Not Tested (Including Mold) $110.00 $110.00 $110.00 $110.00
AGGREGATES (SOILS AND CONCRETE)
Determining Sieve Analysis of Fine and Coarse Aggregates (Coarse Only) CT202/ASTM C136 $200.00 $200.00 $200.00 $200.00 Sieve Analysis of Fine and Coarse Aggregates (Fine Only) CT202/ASTM C136 $265.00 $265.00 $265.00 $265.00 Sieve Analysis of Fine and Coarse Aggregates (Wash Included) CT202/ASTM C117 $335.00 $335.00 $335.00 $335.00 Sieve Analysis of Fine and Coarse Aggregates (200 Wash Only) ASTM C117 $200.00 $200.00 $200.00 $200.00 Evaluating Cleanness of Coarse Aggregate CT227 $335.00 $335.00 $335.00 $335.00 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate ASTM C88/CT214 $245.00 $245.00 $245.00 $245.00 Unit Weight of Aggregate CT212 $165.00 $165.00 $165.00 $165.00 Clay Lumps and Friable Particles in Aggregates ASTM C142 $195.00 $195.00 $195.00 $195.00 Flat Particles, Elongated Particles or Flat and Elongated Particles in Coarse Aggregate ASTM D4791/CT235 $335.00 $335.00 $335.00 $335.00 Organic Impurities in Fine Aggregates for Concrete CT213/ASTM C40 $305.00 $305.00 $305.00 $305.00 Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate ASTM C127/CT206 $305.00 $305.00 $305.00 $305.00 Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate ASTM C128/CT207 $305.00 $305.00 $305.00 $305.00 Resistance to Degradation of Small Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine ASTM C131(535) and C211 $485.00 $485.00 $485.00 $485.00 Percentage of Crushed Particles/Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate ASTM D5821/CT205 $365.00 $365.00 $365.00 $365.00 Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) ASTM C1252/AASHTO T304A $365.00 $365.00 $365.00 $365.00 Sand Equivalent Value of Soils and Fine Aggregate ASTM D2419/CT217 $245.00 $245.00 $245.00 $245.00 Durability Index (Fine) ASTM D3744/CT229 $365.00 $365.00 $365.00 $365.00 Durability Index (Coarse) ASTM D3744/CT229 $365.00 $365.00 $365.00 $365.00 Durability Index (Fine and Coarse) ASTM D 3744/CT229 $365.00 $365.00 $365.00 $365.00 Lightweight Particles in Aggregate ASTM C123/AASHTO T113 QOR QOR QOR QOR Resistance of Rock to Wetting and Drying CRD-C169 $535.00 $535.00 $535.00 $535.00 *Unusual sample preparation for brick specimen will be charged at the established hourly rate.
CONCRETE AND MASONRY TESTS
All fees subject to Basis of Charges
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
INSPECTING
TESTING
ENGINEERING
Standard 2024 2025 2026
SOILS Rate/Each Rate/Hour Rate/Hour Rate/Hour
Direct Shear Test of Soils Under Consolidated Drained Conditions ASTM D3080 $484.00 $484.00 $484.00 $484.00 Caltrans Corrosivity Package $455.00 $455.00 $455.00 $455.00 Determining Field and Laboratory Resistivity and pH Measurements for Soil and Water CT643 QOR QOR QOR QOR Soils and Waters for Sulfate Content CT417 QOR QOR QOR QOR Soils and Waters for Chloride Content CT422 QOR QOR QOR QOR Particle-Size Analysis of Soils (with Hydrometer) ASTM D422 $535.00 $535.00 $535.00 $535.00 Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer ASTM D4542 $565.00 $565.00 $565.00 $565.00 Standard Test Method for Particle-Size Analysis of Soils (without Hydrometer) ASTM D422 $485.00 $485.00 $485.00 $485.00 Liquid Limit, Plastic Limit, and Plasticity Index of Soils ASTM D4318/CT204 $485.00 $485.00 $485.00 $485.00 Laboratory Compaction Characteristics of Soil Using Modified/Standard Effort ASTM D1557/D698 $455.00 $455.00 $455.00 $455.00 Hydrometer Only ASTM D422 $485.00 $485.00 $485.00 $485.00 pH of Soils ASTM D4972 $424.00 $424.00 $424.00 $424.00
Relative Compaction of Untreated and Treated Soils and Aggregates CT216 $535.00 $535.00 $535.00 $535.00 Determining the Resistance "R" Value of Treated and Untreated Bases, Subbases, and Basement Soils by the Stabiliometer ASTM D2844/CT301 $535.00 $535.00 $535.00 $535.00 Laboratory Determination of Water(*moisture) Content of Soil and Rock by Mass ASTM D2216/CT226 $135.00 $135.00 $135.00 $135.00 Density of Soil in Place by the Drive-Cylinder Method D2937 $105.00 $105.00 $105.00 $105.00 Expansion Index of Soils ASTM D4829 $365.00 $365.00 $365.00 $365.00 Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter (Permeability) ASTM D5084/CT220 $500.00 $500.00 $500.00 $500.00 Lab Compaction Characteristics of Soil 1 Point Proctor (Check Point) ASTM D698/D1557 $305.00 $305.00 $305.00 $305.00 Maximum Index Density and Unit Weight of Soils Using a Vibratory Table ASTM D4253 $255.00 $255.00 $255.00 $255.00 Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density ASTM D4254 $255.00 $255.00 $255.00 $255.00 Density of Hydraulic Cement ASTM C188 $230.00 $230.00 $230.00 $230.00 Volatile Organic Content EPA 8260B QOR QOR QOR QOR
Semi Volatile Organics by GC/Ms (Basic Target List) EPA 8270C QOR QOR QOR QOR Total Organic Carbon ASTM 2974/EPA 5310Bm QOR QOR QOR QOR ICP Metals Concentration EPA 6020 - CAM/CCR 17 QOR QOR QOR QOR Total Extractable Petroleum Hydrocarbons: TPH, MTBE, Benzene,Toluene, Ethylbenzene, Zylenes, %SS EPA 8015B QOR QOR QOR QOR
ICP Metals Concentration EPA 6020 QOR QOR QOR QOR
pH EPA 9045D $485.00 $485.00 $485.00 $485.00
Sequential Batch Extraction of Waste with Acidic Extraction Fluid ASTM D5284 QOR QOR QOR QOR Chromium Soluble EPA 7196A QOR QOR QOR QOR
Moisture, Ash and Organic Matter of Peat and Other Organic Soils (Organic Content) ASTM D2974 $245.00 $245.00 $245.00 $245.00 Universal Soil Classification System (USCS) Test ASTM D2487 $265.00 $265.00 $265.00 $265.00 California Bearing Ratio Test ASTM D1883 $335.00 $335.00 $335.00 $335.00 Unconfined Compressive Strength of Cohesive Soil ASTM D2166/CT221 $170.00 $170.00 $170.00 $170.00 $0.00 $0.00 $0.00
ASPHALT $0.00 $0.00 $0.00
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures (Solvent) ASTM D2172/CT310 $665.00 $665.00 $665.00 $665.00 Determining Low Temperature Performance Grade (PG) of Asphalt Binders ASTM 6816 QOR QOR QOR QOR Thickness/Height of Compacted Bituminous Paving Mixture Specimens (Cores) ASTM D3549/CT308 $245.00 $245.00 $245.00 $245.00 Method of Prep of Bituminous Mixture Test Specimens ASTM D6926/CT304 $245.00 $245.00 $245.00 $245.00 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures (LTMD) ASTM D1188 and
D2726/CT308 $900.00 $900.00 $900.00 $900.00
Indirect Tensile (IDT) Strength of Bituminous Mixtures (TSR) ASTM D6931/CT371 $2,860.00 $2,860.00 $2,860.00 $2,860.00 Mechanical Size Analysis (Coarse and Fine) of Extracted Aggregate ASTM D5444/CT202 $365.00 $365.00 $365.00 $365.00 Marshall Stability and Flow of Bituminous Mixtures ASTM D6927 $900.00 $900.00 $900.00 $900.00 Theoretical Maximum Specific Gravity and Density (Rice) ASTM D2041/CT309 $365.00 $365.00 $365.00 $365.00 Measuring the Permeability of Bituminous Pavements and Seal Coats CT341 QOR QOR QOR QOR Swell of Bituminous Mixtures CT305 $335.00 $335.00 $335.00 $335.00 Moisture Vapor Susceptibility of Bituminous Mixtures/Moisture or Volatile Distillates in Asphalt ASTM D1461/CT307 $845.00 $845.00 $845.00 $845.00 Stabilometer Value (1 sample) CT366 $335.00 $335.00 $335.00 $335.00 Determination of Asphalt Content of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $365.00 $365.00 $365.00 $365.00 Determination of Correction Factor of Bituminous Paving Mixtures by the Ignition Method CT382/ASTM D6307 $365.00 $365.00 $365.00 $365.00 Determination of Asphalt and Moisture Contents of Bituminous Mixtures by Microwave Oven CT370 $365.00 $365.00 $365.00 $365.00 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Set of 6) ASTM D1075 $3,025.00 $3,025.00 $3,025.00 $3,025.00 Compressive Strength of Bituminous Mixtures ASTM D1074 $245.00 $245.00 $245.00 $245.00 Hamburg Wheel Track AASHTO T324 $3,300.00 $3,300.00 $3,300.00 $3,300.00 Moisture Susceptibility AASHTO T283 $3,300.00 $3,300.00 $3,300.00 $3,300.00
SOILS, AGGREGATE, ASPHALTIC CONCRETE SERVICES & TESTS
** Does not include sample preparation or sieve analysis * Unusual sample preparation (dried clays, saturated clays, etc.) and all other tests for treated or untreated soils, aggregate subbase and aggregate base will be charged at established rates for laboratory technician.
All fees subject to Basis of Charges
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.
INSPECTING
TESTING
ENGINEERING
Standard 2024 2025 2026
MATERIALS MECHANICAL TESTS Rate/Each Rate/Hour Rate/Hour Rate/Hour Mechanical Testing of Steel Products (General Tensile) ASTM A370 $425.00 $425.00 $425.00 $425.00 Fillet Weld Break Test for Qualification (Welding) AWS B4.0 $185.00 $185.00 $185.00 $185.00 Tension Testing of Metallic Materials, Tension Testing Wrought and Cast Aluminum and Magnesium-Alloy Products, (Welding Coupon Tensile) ASTM E8, B557 and AWS B4.0 $425.00 $425.00 $425.00 $425.00 Mechanical Testing of Steel Products (Couplers) ASTM A370 $415.00 $415.00 $415.00 $415.00 Impact Testing of Miniaturized Charpy V-Notch Specimens, Notched Bar Impact Testing of Metallic Materials ASTM E2248 and ASTM E23 QOR QOR QOR QOR
Testing, Practices, and Terminology for Chemical Analysis of Steel Products ASTM A751 $305.00 $305.00 $305.00 $305.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #3-#8 ASTM A370 and E290 $335.00 $335.00 $335.00 $335.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #9-#11 ASTM A370 and E290 $400.00 $400.00 $400.00 $400.00 Mechanical Testing of Steel Products & Bend Testing of Material for Ductility; #14+ ASTM A370 and E290 QOR QOR QOR QOR Mechanical Testing of Steel Products, Standard Specification for Steel Wire, Plain, for Concrete Reinforcement ASTM A370, A82 and A185 $400.00 $400.00 $400.00 $400.00 Guided Bend Test for Ductility of Welds, Mechanical Testing of Welds ASTM E190 and AWS B4.0 $245.00 $245.00 $245.00 $245.00 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Anchor Bolts Only (Tension and Yield) ASTM F307, F1554 and F606 $480.00 $480.00 $480.00 $480.00 Rockwell Hardness of Metallic Materials ASTM E18 $135.00 $135.00 $135.00 $135.00 Proof Test for Carbon and Alloy Steel (Nuts Only) ASTM A194 or A563 $305.00 $305.00 $305.00 $305.00 Radiographic Examination of Metallic Castings/Weldments ASTM E94, E1030 and E1032 QOR QOR QOR QOR Macroetching Metals and Alloys ASTM E340, E381 and AWS $305.00 $305.00 $305.00 $305.00 Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (HSB Assemblies) ASTM F606 $335.00 $335.00 $335.00 $335.00 Mechanical Testing of Steel Products (Terminators Tensile) ASTM A370 $335.00 $335.00 $335.00 $335.00 Strength for Sewn or Bonded Seams of Geotextiles ASTM D4884 $305.00 $305.00 $305.00 $305.00 Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure ASTM D2261 $305.00 $305.00 $305.00 $305.00 Breaking Strength and Elongation of Textile Fabrics (Grab Test) ASTM D5034 $245.00 $245.00 $245.00 $245.00 Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars ASTM D3039 $900.00 $900.00 $900.00 $900.00 Steel Strand, Uncoated Seven-Wire for Prestressed Concrete ASTM A416 and A1061 $1,330.00 $1,330.00 $1,330.00 $1,330.00
FIREPROOFING
Thickness and Density of Sprayed Fire-Resistive Material (SFRM) ASTM E605 $245.00 $245.00 $245.00 $245.00 Cohesion/Adhesion of Sprayed Fire-Resistive Materials (Test Kit Only) ASTM E736 $70.00 $70.00 $70.00 $70.00
CONTACT INFORMATION
Headquarters: 2118 Rheem Drive • Pleasanton, CA 94588 • P 925.462.5151 • F 925.462.5183 Peninsula: One Embarcadero Center, Suite 535 • San Francisco, CA 94111 • P 415.334.4747 • F 415.438.2357 Oakland: 246 30th Street, Suite 101 • Oakland, CA 94601 • P 510.444.4747 • F 510.835.1825 Stockton: 343 East Main Street, #711 • Stockton, CA 95202 • P 209.507.7555 • F 209.507.7554 Rocklin: 4400 Yankee Hill Road • Rocklin, CA 95677 • P 916.419.4747 • F 916.419.4774 Las Vegas: 3842 E. Post Road • Las Vegas, NV 89120 • P 702.257.4747 • F 702.257.4718 San Jose: 2033 Gateway Place, #500 • San Jose, CA 95110 • P 408.573.6992 • F 408.437.1201 All fees subject to Basis of Charges
DRAFT--Contact the Office of the City Clerk at (408) 535-1260 or [email protected] for final document.