ATTACHMENT B6
LANDSCAPING PLANS - WEST-END
#4 Rebar Stirrups & Horizontal Reinforcement 2'-0"
1'-9"
Embedmen SleeveHinging Lid
END VIEW - FOUNDATION
Dome
Customer Provided Lock
OPTIONSBollard Material (5" Nominal Size)PSS05000 Sch 10 Stainless SteelPSS05040 Sch 40 Stainless SteelPSS05080 Sch 80 Stainless SteelPCS05040 Sch 40 ASTM A-53 Carbon SteelPCS05080 Sch 80 ASTM A-53 Carbon Steel Bollard Cap StyleDomeStandard FlatRevealSloped
Carbon Steel Bollard FinishPowdercoal RAL #As Specified Stainless Steel Bollard FinishPolished #4 FinishAs Specified Stainless Steel Bollard MaterialType 304Type 316
Ø 5 1/2"
ELEVATION VIEW - FOUNDATION (CONCEPTUAL DESIGN ONLY)
1'-0" 3'-0"
Standard Flat Reveal Slope
#4 RebarStirrups
Plan View ofClosed Lid
Lid
Ø 10"
BERWICK BOLLARD SERIES
Catalog #
Project
Comments
Prepared By
Type
Date
SPECIFICATIONS
LED
BOLLARD
ORDERING INFORMATION
Series
BER
Lamp
32”
12W
22W
36W
48”
12W
22W
36W
Finish
Architectural Bronze (AB)
Textured Bronze (TBR)
Matte Black (MBK)
Semi Gloss Black (GBK)
Textured Black (TBK)
Textured Rust (TR)
Matte White (MW)
Textured White (TW)
Gloss White (GW)
Metallic Grey (MG)
Brushed Aluminum (BA)
adder
Metallic Nickel (MN)
Textured Verde Patina (TVP)
Satin Brass (SB)
Copper Vein (CV)
Gold Vein (GV)
Silver Vein (SV)Chrome (CH)
Standard Lens
White Frosted (WF)
Clear Frosted (CFA)
Optional Lens
White Alabaster (WA)
Honey Onyx (HO)
Natural Horn (NH)
Beige Alabaster (BA)
Honey Swirl (HS)
Options
LED EMR - Up to 24W
OCC Sensors
Photo Cell Control
Evergreen Lighting
www.evergreenlighting.com
Material
All parts are Durable Aluminum Extruded
Tube with Aluminum Roof with supports
fabricated for maximum strength.
Lens
Standard White Frosted Premium Acrylic or
Clear Frosted Premium Acrylic
LED
ALTA Long Life, high-efficiency, surface
mount LEDs mounted on MPCB Aluminum
Boards
Lifespan:
100,000 hour LED lifespan based on IES
LM-80 results and TM-21 calculations
Driver
0-10V Dimming Driver for 120/277 volt,
Constant Current, Metal Case, 5 year
warranty
Label
ETL Listed for US and Canada for
Wet Location
Size
32”
48”
Style
Bollard
Sample Number: BER -B-48-36W-AB-WF
DELIVERED LUMENS PER WATT
2700K = 80
3000K = 90
3500K = 100
4100K = 110
5000K = 120
DIMENSIONS: 48”H X 14 3/4”W
EVERGREEN
L I G H T I N G
POST LIGHT
LH60LED-99-10AB4RD
(10’X4” Round anchor base steel post)
EVERGREEN LIGHTING WWW.EVERGREENLIGHTING.COM
1379 Ridgway St. Pomona, CA 91768 PHONE: (909) 865-5599 FAX: (909) 865-5539 MADE IN USA Information appearing hereon is proprietary and confidential and may not be used without the permission of Evergreen Lighting.
Santa Barbara ChinoPROJECT:
SPECIFIER:
MADE IN USA
Note:
LEDs will be positioned lower toward bottom
for increased light and spread.
SPECIFICATION FEATURES
Dimensions 18 3/4" H X 30" W X 10 foot - OAH
Date
Lamps 60 Watt Alta LED
Material Aluminum - Fixture
Finish Textured Black
Lens
Label
Clear Polycarbonate
ETL Wet Location
Voltage 120/277
Type
30”
18 3/4”
10’
S 7
A
B
Catalog #
Project
Description
Type
Date
Sample Spec Number: MAD1103Q-AB-A
800
1800
1600
1800
2200
1600
3600
3200
600
1000
1200
2000
2400
4000
900
1500
2000
13Q
26T
2-13Q
26Q
32T
2-13Q
2-26Q
42T
6LED
10LED
12LED
20LED
24LED
40LED
9LED
15LED
20LED
EVERGREEN
LIGHTING
Material
Paintlok sheet; Standard Powdercoat Finish,
White Acrylic Lens; .125 thickness,
ETL Wet Location.
MADRID WALL MOUNT
Part # Lamp/Watts Lumens A B C 16 16
18 18
18 20 1/2
20 1/2
20 1/2
16 16
18 18
20 1/2
20 1/2
16 18
20 1/2
8 8
9 9
9 10
10 10
8 8
9 9
10 10
8 9
10 MADE IN CALIFORNIA
Standard Features
Installation
Mounting/wireway hole in center of backplate.
Supplied with standard mounting hardware
to mount to a 4” J-box or plaster ring.
Optics*
Contact Evergreen Lighting for complete
photometrics.
Evergreen Lighting
1379 Ridgeway Street, Pomona, CA 91768
Ph: 909-865-5599 Fax: 909-865-5539
www.evergreenlighting.com
MAD1103Q
MAD1105T
MAD1204Q
MAD1205
MAD1111
MAD1304Q
MAD1306
MAD1322
MAD1106L
MAD1110L
MAD1212L
MAD1220L
MAD1324L
MAD1340L
DARK SKY
MAD1109LS
MAD1215LS
MAD1320LS
*Consult Factory
LED
Alta LED #AL-R-1W-30LED array to be
mounted onto an Aluminum MPCB Board
configured to the proper wattage. The LED
arrays will be centered within the Lens area and
mounted on a white aluminum reflective plate.
Ballast
SC programmed electronic high power
factor ballast, multivoltage 120V/277V.
Lamps not included
Driver
Specific Drivers will be matched with each
different LED array configuration/wattage.
Standard Driver Features:
Constant Current
3 / 5 year warranty
120/277 multi-voltage power supplies
Kelvin - 2700K, 3000K, 3500K, 4100K, 5000K
Fluorescent Features
LED Features
Ballast
Architectural Bronze (AB)
Textured Bronze (TBR)
Matte Black (MBK)
Semi Gloss Black (GBK)
Textured Black (TBK)
Textured Rust (TR)
Matte White (MW)
Textured White (TW)
Gloss White (GW)
Metallic Grey (MG)
Textured Gold (TG)
Metallic Nickel (MN)
Textured Verde Patina (TVP)
Satin Brass (SB)
Copper Vein (CV)
Gold Vein (GV)
Silver Vein (SV)
Chrome (CH)
Oil Rubbed Bronze (ORB)
Finishes
Options*
C
4 1/2
4 1/2
5 5
5 6
6 6
4 1/2
4 1/2
5 5
6 6
4 1/2
5 6
Emergency (EMR)
Photocell (PC)
Lamp Sources
Size Modifications
Vandal Proof Enclosure (VPE)
Special Lens
Incandescent
A
B
Catalog #
Project
Description
Type
Date
Sample Spec Number: POM1103Q-AB-A
800
1800
1600
1800
2200
1600
3600
3200
600
1000
1200
2000
2400
4000
900
1500
2000
13Q
26T
2-13Q
26Q
32T
2-13Q
2-26Q
42T
6LED
10LED
12LED
20LED
24LED
40LED
9LED
15LED
20LED
EVERGREEN
LIGHTING
Material
Paintlok sheet; Standard Powdercoat Finish,
White Acrylic Lens; .125 thickness,
ETL Wet Location.
POMPEI WALL MOUNT
Part # Lamp/Watts Lumens A B C 15 15
18 1/2
18 1/2
18 1/2
21 21
21 15
15 18 1/2
18 1/2
21 21
15 18 1/2
21 7
7 8 1/2
8 1/2
8 1/2
9 1/2
9 1/2
9 1/2
7 7
8 1/2
8 1/2
9 1/2
9 1/2
7 8 1/2
9 1/2
MADE IN CALIFORNIA
Standard Features
Installation
Mounting/wireway hole in center of backplate.
Supplied with standard mounting hardware
to mount to a 4” J-box or plaster ring.
Optics*
Contact Evergreen Lighting for complete
photometrics.
Evergreen Lighting
1379 Ridgeway Street, Pomona, CA 91768
Ph: 909-865-5599 Fax: 909-865-5539
www.evergreenlighting.com
POM1103Q
POM1105T
POM1204Q
POM1205
POM1211
POM1304Q
POM1306
POM1322
POM1106L
POM1110L
POM1212L
POM1220L
POM1324L
POM1340L
DARK SKY
POM1109LS
POM1215LS
POM1320LS
*Consult Factory
LED
Alta LED #AL-R-1W-30LED array to be
mounted onto an Aluminum MPCB Board
configured to the proper wattage. The LED
arrays will be centered within the Lens area and
mounted on a white aluminum reflective plate.
Ballast
SC programmed electronic high power
factor ballast, multivoltage 120V/277V.
Lamps not included
Driver
Specific Drivers will be matched with each
different LED array configuration/wattage.
Standard Driver Features:
Constant Current
3 / 5 year warranty
120/277 multi-voltage power supplies
Kelvin - 2700K, 3000K, 3500K, 4100K, 5000K
Fluorescent Features
LED Features
Ballast
Architectural Bronze (AB)
Textured Bronze (TBR)
Matte Black (MBK)
Semi Gloss Black (GBK)
Textured Black (TBK)
Textured Rust (TR)
Matte White (MW)
Textured White (TW)
Gloss White (GW)
Metallic Grey (MG)
Textured Gold (TG)
Metallic Nickel (MN)
Textured Verde Patina (TVP)
Satin Brass (SB)
Copper Vein (CV)
Gold Vein (GV)
Silver Vein (SV)
Chrome (CH)
Oil Rubbed Bronze (ORB)
Finishes
Options*
C
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
4 1/2
Emergency (EMR)
Photocell (PC)
Lamp Sources
Size Modifications
Vandal Proof Enclosure (VPE)
Special Lens
Incandescent
STANDARD IRRIGATION & LANDSCAPE PLAN NOTES FOR
PRIVATELY CONSTRUCTED COMMUNITY FACILITIES DISTRICTS
NOTE TO DESIGNERS: The following standard notes shall be included on the respective irrigation and landscape plan sheets for all privately constructed Community Facilities Districts (CFD). Project -specific notes for items not covered by the City’s standard drawings Approved Materials List, and these standard notes are subject to Public Works Department approval.
Additionally, the following notes shall not be amended without written approval from the Public Works Department.
STANDARD IRRIGATION NOTES
1. The developer shall schedule a pre -construction meeting with the Public Works Department landscape inspector via the Development Services Department inspector prior to the commencement of irrigation work. The d eveloper, its landscape architect, and its landscape contractor shall attend the meeting. The meeting shall be at a time and place acceptable to the Public Works landscape inspector. The developer shall provide the landscape inspector with the contact information for its landscape architect, project manager, superintendent , and irrigation and landscape contractor at the meeting.
2. The developer shall submit a complete materials list and associated catalog cuts for all manufactured materials to be incorporated in the work to the Public Works Department prior to the start of construction.
3. The work shall be cons tructed in accordance with the developer ’s City-approved plans, the City’s irrigation and landscape standard drawings, the City’s Approved Materials List, the Standard Specifications for Public Works Construction, and these standard irrigation notes.
4. Review and approval of the d eveloper’s plans by the City does not warrant that the plans are accurate and complete. The responsibility for accuracy and co mpleteness of drawings lies solely with the developer.
5. Irrigation plans are diagrammatic. The actual location of irrigation improvements shall be in planted areas where possible. Locations of irrigation improvements are subject to the approval of the Public Works Department prior to installation. Irrigation controllers shall be installed “outside” of irrigation coverage.
6. All threaded fitting require Teflon tape.
7. Above ground irrigation systems are not permitted.
8. Control wiring shall be color-coded and labeled at the controller and all junction and valve boxes shall correspond to the appropriate station. Install three additional control sires from the controller to the end of each mainline run.
Rev. 5/15/18 Page 2
9. Dedicated water and electrical services shall be provided for all irrigation systems and controllers. Contractor shall verify and coordinate locations of irrigation water services and irrigation controller electrical service locations with other trades to ensure they correspond with irrigation water points of conne ction and controller locations.
Electrical and water feeds from private sources are not allowed.
10. Controller and communication wire splices shall only be made with Public Works Department approval and, when approved, shall only be made in an approved box w ith a minimum of three foot loop (six feet of wire).
11. Irrigation controllers shall be installed within the limits of the CF D at locations approved by the landscape inspector.
12. The developer shall submit the installation certification of the controller assembly fabricator to the Public Works Department prior to the coverage test inspection.
13. As-built drawings shall be kept on-site and up to date at all times.
14. As-built drawings shall show the locations of:
a. Water services and meter.
b. Electrical services and meter.
c. Backflow assemblies.
d. Controller assemblies.
e. Automatic control valves.
f. Remote control valves with station designation.
g. Isolation and quick coupler valves.
h. Pressure main lines.
i. Control and communication wires.
j. Lateral lines.
k. Sleeves.
15. Developer shall p rovide one set of full size (24 inches by 36 inches) redlined as -built drawings at the time of mainline pressure test inspection to facilitate the inspection.
16. Developer shall submit one set of redlined as -builts prepared by the landscape architect at the time of the coverage test inspection. Once the as-builts are approved by the landscape i nspector the l andscape architect shall prepare mylars. One set of mylars , and two sets of 24 inch by 36 inch, blue line as -builts shall be submitted to the Public Works Department prior to the commencement of the maintenance period.
17. Developer shall submit 11 inch by 17 inch, hermetically sealed , color irrigation station diagrams prior to coverage test inspection. Diagrams shall show the irrigation limits of each station indicated with separate, unique colors.
18. The Developer shall schedule inspections 48 hours in advance of the work being ready for inspection. Inspections shall be scheduled by calling (760) 752-7550 ext. 3550. If the work is not ready for inspection on the scheduled date and time , the developer shall reschedule the inspection as above. The City may charge the developer for resche duled inspections and withhold further inspections until such time as the developer pays the re-inspection fee.
19. Irrigation inspections are required for the following:
a. Pressure main layout including water service, electrical service, controller, and backflow preventer locations.
Rev. 5/15/18 Page 3
b. Excavation and bedding including control and communication wiring. c. Mainline pressure test (as-builts required).
d. Lateral lines and terminal appurtenances.
e. Preliminary coverage test prior to planting (see required submittals above).
20. The irrigation system shall hold 150psi for a mi nimum of four hours for the mainline pressure test.
21. Pressure mainlines shall be “center loaded” and not backfilled until such time as the pressures test has been completed and accepted.
22. Projects that are inac tive for one year or longer are subject to implementation of all irrigation standards changes that have been adopted by the City of San Marcos during the period of inactivity.
23. Excavation for new irrigation systems in existing landscaped areas shall be perf ormed by hand unless otherwise approved by the Public Works Department, and shall be outside of existing tree drip lines.
STANDARD PLANTING NOTES
1. The work shall be constructed and mai ntained in accordance with the developer’s City - approved plans, irrigation and landscape standard drawings, A pproved Materials List, as well as these standard planting notes.
2. Soil samples for amendment testing shall be taken after completion of grading and prior to weed control and soil preparation at a minimum of three locations approved by the Public Works Department. Tests shall be performed by an approved laboratory. Tests performed shall include , but are not limited to : organic matter content, N/P/K., Ph, electrical conductivity, and percent silt, sand, and clay. Test results and application recommendations shall be submitted to the Public Works Department prior to application of amendments. Amendments shall be applied pursuant to the laboratory and manufacturers recommendations.
3. Control weeds by watering for three wee ks to adequately germinate the seedbed and then apply a post -emergent herbicide by a licensed applicator and wait as directed by the manufacturer before planting.
4. Percolation tests shall be performed on all tree planting pits. Pits shall be filled with 18 inches of water and allowed to drain completely. Pits shall then be filled with 12 inches of water and allowed to drain. The second fill must drain at a minimum rate of one inch per hour, for a four-hour duration.
5. Tree well drain systems shall be installed pursuant to City of San Marcos Standard Drawings when percolation tests fail.
6. The developer shall provide positive drainage in all landscape areas.
7. The developer shall schedule inspections 48 hours in advance of the work being ready for inspection. In spections shall be scheduled by calling (760) 752-7550 ext. 3550. If the work is not ready for inspection on the scheduled date and time , the developer shall reschedule the inspection as a bove. The City may charge the d eveloper for rescheduled inspections and withhold further inspections until such time as the d eveloper pays the re-inspection fee.