PUMP STATION MECHANIC III
DEFINITION
To perform highly skilled work in the installation maintenance and repair of pumps, motors, chain drives, valves and related equipment; and to do related work as required.
DISTINGUISHING CHARACTERISTICS
This is the advanced journey level class in the Pump Mechanic series. This position is distinguished from Pump Station Mechanic I/II by its lead function and the degree of technical expertise required in performing the more complex work. This class may be responsible for lead over the Pump Mechanics I/II.
SUPERVISION RECEIVED AND EXERCISED
Receives supervision from the Public Works Supervisor. Technical or functional supervision may be provided by higher level maintenance personnel.
Exercises lead supervision over other Pump Mechanics, including provision of technical supervision, assignment of work and/or the training of less experienced mechanics.
EXAMPLES OF DUTIES
Depending upon assignment, duties may include, but are not limited to, the following:
Read and interpret drawings, plans and diagrams of pump stations and sewer collection systems infrastructure.
Inspect, diagnose and perform major and minor repair work on motors, pumps, compressors, life stations and related conveyance mechanical equipment.
Maintain accurate mechanical maintenance records.
Troubleshoot, test and identify defects in electrical circuits, controls and equipment.
Fully support and utilize the computerized Maintenance Management System to maintain accurate records reports of work performance.
Fully utilize the computerized work systems in accordance with workflow processes.
Install, repair, replace, and modify pumps, controllers, bearings, seals, hydraulic pipes, timing devices and assist in installing telemetering electrical equipment.
City of San Mateo
Pump Station Mechanic III
Use a variety of power tools, hand tools, cutting and welding equipment and multi-meters.
Clean, oil and paint pump station equipment.
Perform preventive and corrective maintenance on the Pump Station equipment.
Evaluate equipment performance and identify problem areas.
Maintain stock inventory and adequate supply of replacement parts.
Perform general maintenance duties in the Pump Stations, including buildings, grounds and equipment as required.
Provide lead technical supervision, including the direction of work assignments and/or the training of less experienced pump maintenance mechanics and assure safe work practice and procedures are adhered to.
May be required to respond to emergency situations after normal working hours and be subject to serve on emergency stand-by alert and call out status on a rotational basis.
Assist in the preparation of administrative reports.
Perform related duties and responsibilities as assigned.
QUALIFICATIONS
In addition to the qualifications of Pump Mechanics I and II Knowledge of:
Installation, diagnosis, operating and repair characteristics of the entire range of pumping stations mechanical systems.
Particular safety hazards associated with wastewater pump operations and the discharge hazards and conditions that may result from mechanical malfunctions.
General principles of supervision and on-the-job training.
General principles and practices of project management.
Ability to:
Perform advanced level mechanical maintenance work including the troubleshooting of equipment for both minor and major repair work.
City of San Mateo
Pump Station Mechanic III
Understand and carry out oral and written instructions.
Read and interpret blueprints, sketches and diagrams.
Use and care for bench and hand tools, machines and equipment of the mechanical trades.
Develop and maintain accurate maintenance records.
Use computers and handheld electronic devices in the course of work.
Communicate clearly and concisely, both orally and in writing.
Establish, maintain, and foster positive and harmonious working relationships with those contacted in the course of work.
Lead, train and provide input in the evaluation of Pump Mechanics.
Ability to use computers and electronic communication devices in the course of work.
Experience and Education
Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying. A typical way to obtain the knowledge and abilities would be:
Experience:
Four years’ experience performing duties comparable to those of a Pump Mechanic I/II, specifically focused on conveyance systems and pump stations.
Education:
High school diploma or equivalent.
Specialized training in the maintenance and repair of major mechanical systems.
City of San Mateo
Pump Station Mechanic III
License or Certificate:
Possession of, or ability to obtain, and maintain a valid California Driver’s License.
Possession of, and ability to maintain, a valid Class A Commercial Driver’s License is required within 12 months of employment.
Possession of a CWEA Collection System Maintenance GradeMechanical Technologist III (or higher) Certification or the ability to obtain one within 12 months of date of hire and retain the certification while employed in this positionis preferred.
ADA SPECIAL REQUIREMENT:
Essential duties require the following physical abilities and work environment:
Ability to sit, stand, walk, kneel, crouch, squat, stoop, reach, crawl, twist, climb, and lift 90 pounds; exposure to extreme noise, outdoors, confining work space, electrical hazards, vibration, chemicals, dust, toxic waste, mechanical hazards, and explosive materials; availability for stand- by and call back.
Ability to wear a respirator and maintain a face seal while using a respirator.
ADOPTED CC: 9-03-13
REVISED CC: 2-01-16, 8-21-17, 7-20-26
FORMER TITLES:
BARGAINING UNIT: SEIU MAINTENANCE UNIT
FLSA: NON-EXEMPT
PERFORMANCE APPRAISAL: MAINTENANCE LEAD WORKERS
DOT: YES
PRE APPT-MEDICAL: YES
SAFETY SENSITIVE: YES
REQUIRED HARASSMENT PREVENTION TRAINING: SUPERVISORY
FORM 700: NO
JOB CODES: 6140
ABOLISHED: