,
Contact:
,
CORPORATE HEADQUARTERS TORRANCE
1798 University Avenue 1455 Crenshaw Blvd, Ste 105
Berkeley, CA 94703-1514 Torrance, CA 90501
T: 510.900.2100 T: 310.755.3600
F: 510.900.2101 F: 310.328.8193
SCHEDULE OF FEES AND SERVICES
n Services will be performed on a time and materials basis at the unit rates listed. n Prices are valid through June 30, 2023.
n Please contact our offices for further detail.
Personnel hourly rates and material testing rates for general and special services are contained in the following pages.
Material Testing
On-Call Professional Services
City of San Pablo
PROFESSIONAL SERVICES
1109
296.00 /Hr Masonry Division
1101
216.00 /Hr 2501
108.00 /Hr
1108
200.00 /Hr 2506
108.00 /Hr
1102
185.00 /Hr 2504
164.00 /Hr
1103
164.00 /Hr 2505
108.00 /Hr
1221
164.00 /Hr 2503
164.00 /Hr
2112
112.00 /Hr
2109
108.00 /Hr Structural Steel Division
1106
108.00 /Hr 2601
110.00 /Hr
1104
88.00 /Hr 2602
110.00 /Hr
1314
Cost+10% /Ea 2603
110.00 /Hr
2608
112.00 /Hr
INSPECTION SERVICES 2609
112.00 /Hr
Oversight Inspections 2610
112.00 /Hr
2107
quote /Hr 2611
110.00 /Hr
2108
212.00 /Hr 2612
110.00 /Hr
2613
110.00 /Hr
Soils/Asphalt Division 2614
110.00 /Hr
2701
112.00 /Hr 2615
110.00 /Hr
2703
108.00 /Hr 2616
110.00 /Hr
2702
108.00 /Hr 2617
Cost+10% /Hr
2704
108.00 /Hr 2618
110.00 /Hr
2705
108.00 /Hr 2620
110.00 /Hr
2706
108.00 /Hr 2621
110.00 /Hr
2707
108.00 /Hr 2622
185.00 /Hr
2708
112.00 /Hr 2623
110.00 /Hr
2709
112.00 /Hr
2710
112.00 /Hr Fireproofing/Roof/Wood/Waterproofing Division:
2801
112.00 /Hr 2901
108.00 /Hr
2802 QC/QA Technician (Caltrans/FAA/NICET certified)
112.00 /Hr 2906
164.00 /Hr
2803 QC/QA Technician (Caltrans/FAA/NICET)
1,565.00 /Day 2917
164.00 /Hr
2804
108.00 /Hr 2905
164.00 /Hr
2908
Cost+10% /Hr
Concrete/Shotcrete Division 2918
108.00 /Hr
2301
108.00 /Hr
2312
108.00 /Hr Specialty Testing Division
2311
108.00 /Hr 2904
112.00 /Hr
2308
108.00 /Hr 2903
108.00 /Hr
2605
110.00 /Hr 2909
212.00 /Hr
2305
108.00 /Hr 2920
212.00 /Hr
2302
108.00 /Hr 2913
164.00 /Hr
2307
164.00 /Hr 2916
108.00 /Hr
2303
108.00 /Hr 2914
112.00 /Hr
2304 Coring/Eval. of Precon Panel (3 cores, up to 6" long) 1,545.00 /Ea 2306
212.00 /Hr
2310
112.00 /Hr 2919
112.00 /Hr
2921
108.00 /Hr
Reinforcing/Strand Steel Division 2922
212.00 /Hr
2201
108.00 /Hr 2902
164.00 /Hr
2203
108.00 /Hr 2915 Rebound Hammer Testing (ASTM C805)
212.00 /Hr
2204
108.00 /Hr 2202
212.00 /Hr
2205
108.00 /Hr 9005
108.00 /Hr
2402
108.00 /Hr 2927
164.00 /Hr
2403 Prepare Stressing Records (Loads/Elong/Lockoff)
108.00 /Hr
2404
108.00 /Hr
PROFESSIONAL SERVICES
ISI Fee Schedule
2022A-3/28/2023
1798 University Avenue, Berkeley, CA 94703-1514
T: 510.900.2100 F:510.900.2101 Page 2 of 5
Aggregate and Soils Mechanics Asphaltic Concrete (cont.) 3401 Sieve Fine/Coarse Aggregates ASTM C136/CT 202
118.00 /Ea 3608 Recommending Optimum Bitumen Content CT 367 2,781.00 /Ea
3402 Materials Finer than # 200 Sieve by Washing ASTM C117 108.00 /Ea 3609 Optimum Bitumen Content of Open Grade CT 368 798.00 /Ea
3403 Gradation ASTM C117 and C136
190.00 /Ea 3610
1,699.00 /Ea
3404 Sp. Gravity/Absorption of Coarse Agg ASTM C128/CT 206
97.00 /Ea 3611 Tensile Strength Ratio ASTM D4867
1,452.00 /Ea
3405 Specific Gravity/Absorption of Fine Agg ASTM C128/CT 207 133.00 /Ea 3612 Marshall Compacted Sample (set of 3) ASTM D1559 288.00 /Set
3407 Bulk Density (Unit Weight) and Voids of Agg ASTM C29 118.00 /Ea 3613 Marshall Stability and Flow, Air Voids ASTM D1559, D3203 118.00 /Ea
3413 Clay Lumps and Friable Particles in Agg ASTM C142
77.00 /Ea 3614 Bulk Specific Gravity of Core Sample ASTM D2726
82.00 /Ea
3414 Cleanness Value of Coarse Agg CT 227
195.00 /Ea 3615 Theoretical Max Specific Gravity (Rice) ASTM D2041 144.00 /Ea
3416 Aggregate Durability Index ASTM D3744/CT 229
370.00 /Ea 3616 Sieve Analysis of Extracted Aggregate ASTM D5444 190.00 /Ea
3417 Percent Crushed Particles ASTM D5821/CT 205
242.00 /Ea 3617
2,781.00 /Ea
3418 Fine Aggregate Angularity ASTM C1252/CT 234
133.00 /Ea 3618 Bulk Specific Gravity of Compacted Samples ASTM D1188 118.00 /Ea
3450 Materials Finer than No. 200 Sieve ASTM D1140
108.00 /Ea 3619 Swell of Bituminous Mixtures CT 305
144.00 /Ea
3451 Liquid Limit, Plastic Limit and PI ASTM D4318/CT 204 211.00 /Ea 3620 Moisture Vapor Susceptibility of Mixture CT 307 267.00 /Ea
3452 Particle Size Analysis of Soils ASTM D422
190.00 /Ea 3621 Centrifuge Kerosene Equivalent and ABR CT 303 221.00 /Ea
3453 Hydrometer Analysis, incl Sp. Gravity ASTM D422
448.00 /Ea 3622 Lab Test Maximum Density CT 375
473.00 /Set
3454 Soil Classification ASTM D422, D1140, D4318
473.00 /Ea
3455 Specific Gravity of Soils ASTM D854/CT 209
195.00 /Ea Concrete/Shotcrete Products
3456 Moisture Content of Soil/Agg ASTM D2216/C566/CT 266
41.00 /Ea 3101 Compression Test 4"x8" Cylinder ASTM C39
61.00 /Ea
3457
77.00 /Ea 3105 Compression Test of Shotcrete/Concrete Core ASTM C42 113.00 /Ea
3458 Sand Equivalent for Soils/Fines ASTM D2419/CT 217
169.00 /Ea 3106 Unit Weight of Freshly-Mixed Concrete ASTM C138
56.00 /Ea
3459 Lab Compaction (Standard) A/B (4"Mold) ASTM D698
288.00 /Ea 3107 Density, Absorption, Voids in Hard Concrete ASTM C642
92.00 /Ea
3460 Lab Compaction (Standard) C (6"Mold) ASTM D698
345.00 /Ea 3108 Concrete Trial Batch (IBC or CCR Title 24, per W/c Ratio 2,121.00 /Ea
3461 Lab Compaction (Modified) A/B (4" Mold) ASTM D1557 288.00 /Ea 3120 Modulus of Elasticity of Concrete ASTM C469 267.00 /Ea
3462 Lab Compaction (Modified) C (6" Mold) ASTM D1557
345.00 /Ea 3121
77.00 /Ea
3463 Oversize Correction for Lab Compaction ASTM D4718
77.00 /Ea 3124 Drying Shrinkage of Concrete Beams ASTM C157 set of 3 530.00 /Set
3464 Unconfined Comp. Strength inc. MD ASTM D2166/CT 221 154.00 /Ea 3125 Concrete Splitting Tensile Strength ASTM C496
92.00 /Ea
3465 Density/Unit Weight by Sand Cone Method ASTM D1556
46.00 /Ea 3126
72.00 /Ea
3466 R-Value of Compacted Soils w/no Addt ASTM D2844/CT 301 525.00 /Ea 3128 Flexural Strength of Concrete ASTM C78/CT 523 133.00 /Ea
3467 California Impact Test Max Wet Density CT 216
401.00 /Ea 3131 Compressive Strength of Insulating Concrete ASTM C495
72.00 /Ea
3468 Maximum Index Density on Vibratory Table ASTM D4253 391.00 /Ea 3132 Density of Lightweight Concrete ASTM C567 113.00 /Ea
3469 Organic Impurities in Fine Aggregate ASTM C140
66.00 /Ea 3133 Creep of Concrete (per month) ASTM C512
288.00 /Ea
3470 California Bearing Ration (CBR), 3 points ASTM D1883 772.00 /Ea 3134 Flexural Toughness (FRC) Beams ASTM C1018 288.00 /Ea
3471 LA Abrasion Resistance ASTM C131
267.00 /Ea 3135 Flexural Toughness (FRC) Round Panels ASTM C1550 375.00 /Ea
3472 Aggregate Soundness Sodium Sulfate ASTM C88/CT214
139.00 /Ea 3129 Calibration of Concrete w/ Maturity System (17 cylinders) 1,462.00 /Set
3473
154.00 /Ea 3130
Cost+10% /Hr
3474 R-Value of Compacted Soils w/Field Addt ASTM D2844/CT 301 561.00 /Ea 3140 Compression Test 6"x12" Cylinder ASTM C39
82.00 /Ea
3475 R-Value of Compacted Soils w/Lab Addt ASTM D2844/CT301 648.00 /Ea 2911 Concret Moisture Vapor Emission Kit ASTM F1869
52.00 /Ea
3476 California Bearing Ratio (CBR) no curve ASTM D1883 525.00 /Ea 2923 Concrete In-Situ Relative Humidity ASTM F2170 Add to hrly rate
52.00 /Ea
3477 Flat & Elongated Particles ASTM D4791
226.00 /Ea 2924 pH Value Determination Add to hrly rate
15.00 /Ea
3478 CTB Compressive Strength (Field Mixed ASTM D1633/D559) 144.00 /Ea 2309
77.00 /Ea
Asphaltic Concrete Products Fireproofing/Roof/Wood/Waterproofing Products 3601 Moisture Content of Asphalt Mixture CT 370
72.00 /Ea 3701 Density of Spray Applied Fireproofing UBC 7-6
77.00 /Ea
3602 Bulk Specific Gravity of Bituminous Mixture CT 308
77.00 /Ea 2912
52.00 /Ea
3603 Theoretical Maximum Sp. Gravity and Density CT 109 139.00 /Ea 3702 Compression Test of Plaster Cylinder or Cube ASTM C472
77.00 /Ea
3604 Asphalt Content by Vacuum Extraction ASTM D2172/CT 362 128.00 /Ea 3703 Density of Plaster Cylinder or Cube ASTM C472
77.00 /Ea
3605 Asphalt Content by Ignition Method ASTM D6307/CT 382 216.00 /Ea 3704 Bond Strength of Tile ASTM C482
412.00 /Set
3606 Asphalt Content by Nuclear Method ASTM D4125/CT 379 108.00 /Ea 3705 Tensile Test of Polymer Material (Fibrwrap) ASTM D3039 721.00 /Set
3607 Stabilometer Value ASTM D1560/CT 366
169.00 /Ea 3708 Tensile Test of RFP (delivered by others for testing) 660.00 /Set
3709 Calibration of Torque Wrench (20-200 ft-lbf) 70.00 /Ea
LABORATORY SERVICES
ISI Fee Schedule
2022A-3/28/2023
1798 University Avenue, Berkeley, CA 94703-1514
T: 510.900.2100 F:510.900.2101 Page 3 of 5
Masonry Products Engineering Review/Miscellaneous Items 3109 Drying Shrinkage of CMU Units ASTM C426
242.00 /Ea 1201 Concrete Mix Design Review UBC or CCR Title 24 212.00 /Ea
3110 CMU Shrinkage, Absorption, Moisture, Unit Wt. ASTM C140 1,328.00 /Set 1202 Shotcrete Mix Design Review UBC or CCR Title 24 212.00 /Ea
3123 CMU Core Shear Test CCR Title 24, per side
113.00 /Ea 1203 Grout Mix Design Review UBC or CCR Title 24 212.00 /Ea
3136 Compression Test 2"x2" Cube ASTM C109
77.00 /Ea 1204
185.00 /Hr
3102 Compression Test 2"x4" Mortar or Grout ASTM C39
61.00 /Ea 1205
185.00 /Hr
3103 Compression Test 4"x4" Grout Prism ASTM C39
77.00 /Ea 1206
164.00 /Hr
3104 Compression Test Masonry Prism ASTM C1314
200.00 /Ea 1210 Final Inspection Affidavit UBC 1701, up to 3 visits 288.00 /Ea
3137 Compression Test Masonry Block ASTM C140
128.00 /Ea 1211 Final Inspection Affidavit UBC 1701, up to 10 visits 401.00 /Ea
1212 Final Inspection Affidavit UBC 1701, up to 25 visits 515.00 /Ea
Reinforcing Steel Products 1213 Final Inspection Affidavit UBC 1701, up to 100 visits 860.00 /Ea
3201 Tensile and Bend #3 to #8 ASTM A370
133.00 /Ea 1214 Final Inspection Affidavit UBC 1701, more than 100 visits 1,143.00 /Ea
3202 Tensile and Bend #9 to #11 ASTM A370
180.00 /Ea 1215 Laboratory Final Verified Report DSA or OSHPD 319.00 /Ea
3203 Tensile and Bend #14 and #18 ASTM A370
350.00 /Ea 1216 Geotechnical Final Verified Report DSA or OSHPD 600.00 /Ea
3204 Slip Test of Mechanical Splice CT 670
113.00 /Ea 1217
185.00 /Hr
3205
329.00 /Ea 1218
200.00 /Hr
3206
381.00 /Ea 1219 Soil Compaction Test Review (by Geotechnical Engineer) 200.00 /Hr
3207
180.00 /Ea 1220
212.00 /Ea
3208
180.00 /Ea 2001
212.00 /Hr
2002
212.00 /Hr
Structural Steel/Welding Products 2003
212.00 /Hr
3301 Rockwell Hardness ASTM A370, E18
72.00 /Ea 2004
164.00 /Hr
3302 Charpy Impact 45 deg. V (to 100F) ASTM A370, E23
360.00 /Ea
3303 Macroetch Examination Welded Test Joints AWS D1.1, 1.4 211.00 /Ea Travel, Mileage, Transportation Expenses
3304 Reduced Section Tensile ASTM A370
128.00 /Ea 1301
84.00 /Hr
3305 Guided Bends; side, root, or face AWS D1.1
36.00 /Ea 1305
At Cost /Mile
3306 All Weld Metal Tensile AWS D1.1
128.00 /Ea 1306
138.00 /Day
3307 Tensile Test of Miscellaneous Steel ASTM A370
128.00 /Ea 1307
84.00 /Hr
3308 Tensile and Bend Test of Miscellaneous Steel ASTM A370 159.00 /Ea 1308
cost /Ea
3310
324.00 /Set 1309
cost /Ea
3311 Mechanical Properties of End-Welded Studs ASTM A370 149.00 /Ea 1310
cost /Ea
3312
169.00 /Ea 1311
cost /Ea
3313
118.00 /Ea 1312
Cost+10% /Ea
3314
118.00 /Ea 1313
108.00 /Hr
2604
260.00 /Set 1314
Cost+10% /Ea
2619 Welder Qualification Test Record (Excluding Lab Tests 110.00 /Hr
ISI Fee Schedule
2022A-3/28/2023
1798 University Avenue, Berkeley, CA 94703-1514
T: 510.900.2100 F:510.900.2101 Page 4 of 5
SPECIAL INSPECTION AND
MATERIALS TESTING SERVICES
A. Minimum Hourly Charges:
9003 Show-up/Cancellation 2 hours
9003NS Show-up/Cancellation (Night Shift) unless cancelled at least 24 hours in advance 8 hours Inspector/Technician services (0 - 4 hours) 4 hours
Inspector/Technician services (4 - 8 hours) 8 hours
1221 Project Manager* 1 hour
1104 Administrative Services** 1 hour
B. Rate for Field Inspectors:
Basic Rate $ 108.00/hr
Basic Rate w/ Testing Equipment $ 112.00/hr
Overtime (over 8 hrs Monday-Friday; first 8 hrs on Saturdays) 1.5 x Basic Rate Doubletime (over 12 hrs Mon-Fri; over 8 hrs on Sat; Sundays & Holidays) 2 x Basic Rate
1.5 x Basic Rate
Night Shift Differential (shifts starting after 2pm/before 4am) 1.125 x Basic Rate C. Expenses:
1307 Travel Time, if required (beyond 50 miles from the jobsite) $ 84.00/hr 1305 Auto Mileage, if required At Cost/mi
1306 Per Diem (Or cost if greater than $125.00/day) $ 138.00/day Equipment Fee $ 100.00/day
1308 Miscellaneous Expenses (Parking/Tolls/Airfare) Cost 1314 Outside Services & Equipment Rentals Cost+10%
1210 Final Affidavit Minimum Charge (ISI requires 5-10 working days written notice prior to issuing) $ 288.00/ea Project Management Fee * 7% each invoice
*Applicable when Project Management is not provided as a separate line item in this estimate Administrative/Special Handling Fee ** 3% each invoice
D. Notes:
l
l
l
Technical personnel are members of the Operating Engineers (AFL-CIO) Local No. 3 and the above charges are a part of our contractual commitment. Rates are subject to an annual COLA increase of 6% adjustment on July 1st of each year to cover any increase in ISI's cost due to changes in wages, benefits, working conditions and other provisions of the Union Labor Agreement and Prevailing Wage requirements. Prices quoted are valid through June 30, 2023. Inspection services are charged portal to portal from dispatch location and are subject to mileage and travel. For assignments that require equipment such as nuclear gauges, hydraulic systems for proof-load testing, high-strength torque wrench etc., billing time will include picking up and dropping off the equipment at ISI's laboratory as well as round trip travel.
Invoice(s) will be issued bi-weekly; payments are due within thirty (30) days from date of invoice without retention.
Overdue payments are subject to a late payment charge of 1.5% of the invoice amount plus interest at 1.5% per month until all overdue amounts, late charges and interest are fully paid. ISI reserves the right to suspend the services without notice if invoices are not paid when due, and to terminate the services if invoices are not fully paid within five (5) days Before a final affidavit report can be issued, all outstanding issues must be resolved. These issues may include reported non-conformances, lab test results, and payment for services. A 50% "RUSH" schedule premium will be charged for expedited final affidavit requests (requested with less than five working days notice).
City of San Pablo
On-Call Professional Services
Material Testing
BASIS OF CHARGES
**Applicable when client requests special system programming/reporting, non-electronic or back-up documentation in addition to what is normally provided. ISI is committed to conducting environmentally-friendly practices in our offices, including paperless reporting and invoices.
Basis of Charges, P#
2022A-3/28/2023
1798 University Avenue, Berkeley, CA 94703
T: 510.900.2100 F:510.900.2101 Page 5 of 5