Johnson Controls Contract (available in the City Clerk's Reading File) — Santa Clarita City Council, February 28, 2023

Johnson Controls planned service proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer

CITY OF SANTA CLARITA CITY HALL

Local Johnson Controls Office
5770 WARLAND DR STE A
CYPRESS, CA 90630-5047

Agreement Start Date:
03/01/2023

Proposal Date
01/23/2023

Estimate No:
1-1JKY2XL3

Partnering with you to deliver value-driven solutions

Every day, we transform the environments where people live, work, learn and play. From optimizing building performance to improving safety and enhancing comfort, we are here to power your mission.

A Planned Service Agreement with Johnson Controls provides you with a customized service strategy designed around the needs of your facility. Our approach features a combination of scheduled, predictive and preventative maintenance services that focus on your goals.

As your building technology services partner, Johnson Controls delivers an unmatched service experience delivered by factory-trained, highly skilled technicians who optimize operations of the buildings we work with, creating productive and safe environments for the people within.

By integrating our service expertise with innovative processes and technologies, our value-driven planned service solutions deliver sustainable results, minimize equipment downtime and maximize occupant comfort.

With more than a century of healthy buildings expertise, Johnson Controls leverages technologies to successfully deliver smart solutions to facilities worldwide.

Johnson Controls was recognized by Frost &
Sullivan as the 2020 North American
Company of the Year for innovation in the
Smart connected Chillers market

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 2 of 95

Executive summary

Planned service proposal for CITY OF SANTA CLARITA CITY HALL

Dear Customer,

We value and appreciate your interest in Johnson Controls as a service provider for your building systems and are pleased to provide a value-driven maintenance solution for your facility. The enclosed proposal outlines the Planned Service Agreement we have developed on your facility.

Details are included in the Planned Service Agreement summary (Schedule A), but highlights are as follows:

• In this proposal we are offering a service agreement for 1 Year starting 03/01/2023 and ending 02/29/2024.

• The agreement price for first year is $181,842.00; see Schedule A, Supplemental Price and Payment Terms, for pricing in subsequent years.

• The equipment options and number of visits being provided for each piece of equipment are described in Schedule A, Equipment list.

As a manufacturer of both mechanical and controls systems, Johnson Controls has the expertise and resources to provide proper maintenance and repair services for your facility.

Again, thank you for your interest in Johnson Controls and we look forward to becoming your building technology services partner.

Please contact me if you have any questions.

Sincerely,

Natalie Avelar
Service Manager
(866) 819-0230

The power behind your mission

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 3 of 95

Benefits of planned service
A Planned Service Agreement with Johnson
Controls will allow you to optimize your building’s
facility performance, providing dependability,
sustainability and energy efficiency. You’ll get a
value-driven solution that fits your specific goals,
delivered with the attention of a local service
company backed by the resources of a global
organization.

With this Planned Service Agreement, Johnson
Controls can help you achieve the following five
objectives:

1. Identify energy savings Opportunities
Since HVAC equipment accounts for a major
portion of a building’s energy usage, keeping
your system performing at optimum levels
may lead to a significant reduction in energy
costs.

2. Reduce future repair costs
Routine maintenance may maximize the life of your equipment and may reduce equipment breakdowns.

3. Extend asset life
Through proactive, factory-recommended maintenance, the life of your HVAC assets may be extended, maximizing the return on your investment.

4. Ensure productive environments
Whether creating a comfortable place where employees can be productive or controlling a space to meet specialized needs, maintenance can help you achieve an optimal environment for the work that is being accomplished

5. Promote environmental health and safety
When proper indoor conditions and plant requirements are maintained, business outcomes may be improved by minimizing sick leave, reducing accidents, minimizing greenhouse gas emissions and managing refrigerant requirements.

All of the services we perform on your equipment are aligned with “The 5 Values of Planned Maintenance” and our technicians understand how the work they perform can help you accomplish your business objectives.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 4 of 95

Our partnership

Personalized account management
A Planned Service Agreement also provides you with the support of an entire team that knows your site and can closely work with you on budget planning and asset management. Your local Johnson Controls account management team can help guide planned replacement, energy retrofits and other building improvement projects. You’ll have peace of mind that an entire team of skilled professionals will be looking out for what is best for your facility and budget.

A culture of safety
Johnson Controls technicians take safety seriously and personally, and integrate it into everything they do. All of our technicians participate in regular and thorough safety training.

Because of their personal commitment, we are a leader in the HVAC service industry for workplace safety performance. This means that you do not have to worry about us when we are on your site.

Commitment to customer satisfaction
Throughout the term of your Planned Service Agreement, we will periodically survey you and use your feedback to continue to make improvements to our service processes and products.

Our goal is to deliver the most consistent and complete service experience possible. To meet this goal, we’ve developed and implemented standards and procedures to ensure you receive the ultimate service experience – every time.

Energy & sustainability
A more sustainable world one building at a time – Johnson Controls is a company that started more than 125 years ago with a product that reduced energy use in buildings. We’ve been saving energy for customers ever since. Today, Johnson Controls is a global leader in creating smart environments where people live, work and play, helping to create a more comfortable, safe and sustainable world.

The value of integrity
Johnson Controls has a long, proud history of integrity. We do what we say we will do and stand behind our commitments. Our good reputation builds trust and loyalty. In recognition for our commitment to ethics across our global operations, we are honored to be named one of the World’s Most Ethical Companies by Ethisphere Institute, a leading think tank dedicated to business ethics and corporate social responsibility. In addition, Corporate Responsibility Magazine recognizes Johnson Controls as one of the top companies in its annual “100 Best Corporate Citizens” list.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 5 of 95

Service delivery
As part of the delivery of this Planned Service Agreement, Johnson Controls will dedicate a local customer service agent responsible for having a clear understanding of the agreement scope, and your facility procedures and protocols.

A high-level overview around our service delivery process is outlined below including scheduling, emergency service, on-site paperwork, communication and performing repairs outside of the agreement scope.

Scheduling
Preventative maintenance service will be scheduled using our automated service management system. In advance of the scheduled service visit, our technician is sent a notice of service to a smartphone. Once the technician acknowledges the request, your customer service agent will call or e-mail your on-site contact to let you know the start date and type of service scheduled.

The technician checks in, wears personal protective equipment, performs the task(s) as assigned, checks out with you and asks for a screen capture signature on the smartphone device. A work order is then e-mailed, faxed or printed for your records.

Emergency services
Emergency service can be provided 7 days a week, 24 hours a day, 365 days a year. During normal business hours, emergency service will be coordinated by the customer service agent.

After hours, weekends and holidays, the emergency service number transfers to the Johnson Controls after-hours call center and on-call technicians are dispatched as needed.

Johnson Controls is committed to dispatching a technician within hours of receiving your call through the service line. A work order is e-mailed, faxed or printed for your records.

Depending on the terms of your agreement, you may incur charges for after hour services.

Communication
A detailed communication plan will be provided to you so you know how often we will provide information to you regarding your Planned Service Agreement. The communication plan will also provide you with your main contacts at Johnson Controls.

Approval process for non-covered items
Johnson Controls will adhere to your procurement process. No work will be performed outside of the agreement scope without prior approval. Johnson Controls will work with you closely to ensure your procurement process is followed before any non-covered item work is started.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 6 of 95

Summary of services and options

Comprehensive and operational inspections
During comprehensive and operational inspections, Johnson Controls will perform routine checks of the equipment for common issues caused by normal wear and tear on the equipment. Additional tests can be run to confirm the equipment’s performance.

Routine maintenance, such as lubrication, cleaning and tightening connections, can be performed depending on the type of equipment being serviced. Routine maintenance is one of the keys to the five values of maintenance – it can help identify energy saving opportunities, reduce future repair costs, extend asset life, ensure productive environments, and promote health and safety.

Boiler Tube Brushing
Boiler heat transfer surfaces must be kept clean to provide for safe and economical boiler operation. During boiler operation deposits such as soot and scale can accumulate on boiler tubes, causing a loss in efficiency due to reduced heat transfer. This includes capacity reduction and high draft losses. Corrosive elements are often present in the scale, increasing the probability of tube failure. Extreme cases of boiler tube blockage can also create a safety or fire hazard. Johnson Controls technicians will brush the tubes, cleaning these surfaces. This improves heat transfer, optimizes efficiency, and reduces potential corrosion and safety issues.

This service does not include chemical treatment required to control or eliminate biohazards such as Legionella unless chemical water treatment services have been added as a separate option.

Combustion Analysis
Combustion analysis and subsequent adjustments are critical to efficient boiler operation. Boiler fuel, whether natural gas or oil, must burn in the proper combination of fuel and air (oxygen).

Poor combustion can create soot deposits on the tubes, impairing heat transfer. Incomplete combustion can also lead to the potential formation of CO (carbon monoxide); an odorless gas that can harm occupants in the mechanical room and/or building. Johnson Controls technicians will analyze the flue gas to determine if optimal fuel/air ratios are present.

Evaporator Coil Cleaning
Dirty evaporator coils impair heat transfer from the circulated air to the cooling medium. This reduces the efficiency of the unit. Extremely dirty coils may impede the airflow across the coil and out into the building, which can cause occupant discomfort and complaints. Johnson Controls technicians will clean these coils, improving efficiency and occupant comfort.

Filter Replacement
Clean air filters help maintain proper airflow throughout your building. Decreased airflow can impair the performance of the cooling coil and may lead to occupant discomfort and inefficient operation of the HVAC system. Johnson Controls will replace the filters on a regular basis to maintain airflow and maximize air quality.

Tower/Basin Cleaning
During operation, a cooling tower becomes a natural repository for wind-blown debris. This debris has a tendency to collect in the tower’s sump/basin. Johnson Controls technicians will clean the tower and basin to prevent blockage and potential damage to critical system components. This service does not include chemical treatment required to control or eliminate biohazards such as Legionella unless chemical water treatment services have been added as a separate option.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 7 of 95

Vibration Analysis – Fan & Pump
Johnson Controls technicians will collect vibration data at various measurement points on the machine. This data is used to assess the condition of bearings, sheaves, belts and rotors. It also detects the presences of imbalance or misalignment. Repairs are followed up with another vibration analysis to ensure root problems have been identified and resolved.

Customer Portal / Service Information Access
The Johnson Controls customer portal is the online gateway to easily access various elements of your service information. This real-time, self-service mechanism is just one more way for you to stay in touch with our service within your facilities. Using the internet, you can view service call history by location, monitor agreements, as well as view asset and invoice information.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 8 of 95

Summary
Thank you for considering Johnson Controls as your building technology services partner. The following agreement document includes all the details surrounding your Planned Service Agreement.

With planned service from Johnson Controls, you’ll get a value-driven solution that can help optimize your building controls and equipment performance, providing dependability, sustainability and energy efficiency. You’ll get a solution that fits your specific goals, delivered with the attention of a local service company backed by the resources of a global organization.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 9 of 95

Planned Service Agreement

Customer Name : CITY OF SANTA CLARITA CITY HALL
Address: 23920 VALENCIA BLVD STE 300 SANTA CLARITA,CA 91355-5316 Proposal Date: 01/23/2023
Estimate #: 1-1JKY2XL3

Scope of Service

Johnson Controls, Inc. (“JCI”) and the Customer (collectively the “Parties”) agree Preventative Maintenance Services, as defined in Schedule A (“Services”), will be provided by JCI at the Customer’s facility. This Planned Service Agreement, the Equipment List, Supplemental Price and Payment Terms, Terms and Conditions, and Schedules attached hereto and incorporated by this reference as if set forth fully herein (collectively the “Agreement”), cover the rights and obligations of both the Customer and JCI.

Extended Service Options for Premium Coverage

If Premium Coverage is selected, on -site repair services to the equipment will be provided as specified in this Agreement for the equipment listed in the attached Equipment List.

Equipment List

Only the equipment listed in the Equipment List will be covered as part of this Agreement. Any changes to the Equipment List must be agreed upon in writing by both Parties.

Term / Automatic Renewal

This Agreement takes effect on 03/01/2023 and will continue until 02/29/2024 (“Original Term”). The Agreement will automatically renew and extend for successive terms equal to the Original Term unless the Customer or JCI gives the other written notice it does not want to renew prior to the end of the then- current term (each a “Renewal Term”). The notice must be delivered at least (90) days prior to the end of the Original Term or of any Renewal Term. The Original Term and any Renewal Term may be referred to herein as the “Term”. Renewal price adjustments are discussed in the Terms and Conditions.

Refrigerant Charges

Refrigerant is not included under this Agreement and will be billed separately to the Customer by JCI.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 10 of 95

Price and Payment Terms

The total Contract Price for JCI’s Services during the first year of the Original Term is $181,842.00. This amount will be paid to JCI in advance in Monthly installments. Pricing for each subsequent year of a multiyear Original Term is set forth in the Supplemental Price and Payment Terms. Unless otherwise agreed to by the parties, All payments will be due upon receipt. Renewal price adjustments are set forth in the Terms and Conditions.

Invoices will be sent to the following location: CITY OF SANTA CLARITA 23920 VALENCIA BLVD, SUITE 300
SANTA CLARITA,CA 91355

To ensure that JCI is compliant with your company’s billing requirements, please provide the following information:

PO is required to facilitate billing:

{{[]_es_:signer1}} No: This signed contract satisfies requirement

{{[]_es_:signer1}} YES: Please reference this PO number : {{address_es_:signer1}}

AR Invoices are accepted via e-mail:

{{[]_es_:signer1}} YES: E-mail address to be used : {{email1_es_:signer1}} {{[]_es_:signer1}} No: Please submit invoices via mail
{{[]_es_:signer1}} No: Please submit via : {{email2_es_:signer1}}

This proposal is valid for thirty days from the proposal date.

JOHNSON CONTROLS Inc.

JCI Manager: {{*N_es_:signer2:fullname}}

Customer Manager: {{*N_es_:signer1:fullname}}

JCI Manager Signature:

Customer Manager Signature:

Title: {{*Ttl_es_:signer2:title}} Date: {{Dte_es_:signer2:date}} Title: {{*Ttl_es_:signer1:title}} Date: {{Dte_es_:signer1:date}}

JCI Branch: JOHNSON CONTROLS LOS ANGELES CA CB - 0N0G
Address: 5770 WARLAND DR STE A
CYPRESS,CA 90630-5047
Branch Phone: (866) 819-0230
Branch Email:

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 11 of 95

Schedule A - Equipment List

CITY OF SANTA CLARITA CITY HALL

23920 VALENCIA BLVD STE 300
SANTA CLARITA, CA 91355-5316

Product: VAV Box, All Types
Quantity: 12
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
(12) VAV Boxes Write-In 1-13MT867F

Product: Split System, Cooling with Gas Heat, <7.5 Tons Quantity: 1
Coverage Level: Basic

Services Provided
1 Cooling Comprehensive
4 Return Air Filter Change
2 Operational (Mid Season -
Cooling/Heating)
1 Gas Heating Comprehensive

Customer Tag Manufacturer Model # Serial #
2nd Floor server room Carrier 24ANA760A300 3106E09045

Product: Split System, Cooling Only, <7.5 Tons
Quantity: 7
Coverage Level: Basic

Services Provided
1 Cooling Comprehensive
3 Operational (Mid Season -
Cooling Only)
1 Condenser Coil Cleaning
4 Return Air Filter Change

Customer Tag Manufacturer Model # Serial #
3rd Floor Traffic Room Amana RCB30B2A 9807186984
AV Room ground floor parking lot Write-In FIELD UPDATE
NEEDED
1-13MT866A/FIELD

UPDATE NEEDED
Av room air handler Ruud S41-34-05-C0A AD159740
Mitsubishi split Mitsubishi MUY-GE18NA 0001828T
Suit 202 Carrier FV4BNB006 1206A83703
Third floor traffic room Sun Mfg S41-34-05-C0A EC167064 Traffic server room Mitsubishi MSY-GE18NA 0001617

Product: Packaged, Commercial, Self Contained, <40 Tons Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
4 Return Air Filter Change
1 Comprehensive
1 Belt Change

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 12 of 95

1 Evaporator Coil Cleaning

Customer Tag Manufacturer Model # Serial #
3rd Floor Wire Room JCI_YORK D1NH036N05606C NBKM021809

Product: Air Compressor/Dryer, Air Compressor, Commercial, 5-20 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Belt Change
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
Air compressor Manchester Tank W 35004 CRN F05161234567890

Product: Air Compressor/Dryer, Air Compressor, Commercial, <5 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
Air drier 1 Hankison HPR510 H510A1150908144

Product: Condensing Unit, Air Cooled, Scroll, <10 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Condenser Coil Cleaning (with
louvers)

Customer Tag Manufacturer Model # Serial #
Audio Visual room Ruud UAKA-030JAZ 5428F379711038

Product: Boiler, Gas-Fired, Fire Tube, <50 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Combustion Analysis

Customer Tag Manufacturer Model # Serial #
Boiler RayPak H9-1802 0303206331

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 13 of 95

Product: Air Handling Unit (AHU), Return Air, 35-60 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Belt Change
1 Comprehensive
1 Standard Filter Change

Customer Tag Manufacturer Model # Serial #
City Hall AHU Write-In FIELD UPDATE
NEEDED
1-13MTLRGJ/FIELD

UPDATE NEEDED

Product: Air Handling Unit (AHU), Make-Up Air Unit (MAU), <15 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
4 Standard Filter Change
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
City Hall MUA Unit Write-In FIELD UPDATE
NEEDED
1-13MT868A/FIELD

UPDATE NEEDED

Product: Fan, Exhaust Fan, Roof Mounted, 0-5 HP
Quantity: 2
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Customer Tag Manufacturer Model # Serial #
EF-1 Cook Fans 180 ACE 138SF54211-00/0028105
EF-2 Loren Cook Company 100 ACEB S232683-00 06/88

Product: Expansion Tank
Quantity: 2
Coverage Level: Basic

Services Provided
4 Operational

Customer Tag Manufacturer Model # Serial #
EXT-2 Amtrol SX-30V 13127703
EXT-3 Amtrol SX-30V 13127702

Product: Pump, Hot Water, 0-10 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 14 of 95

Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
HWP-1 Weinman Pumps B028/N06N118R029 6307-2Z-J/C3
HWP-2 Weinman Pumps B028/N06N118R029F 6307-2Z/C3

Product: Roof Top Unit (RTU), Cooling Only, with Economizer, 25.5-60 Tons Quantity: 6
Coverage Level: Basic

Services Provided
3 Operational (Mid Season -
Cooling Only with Economizer)
4 Standard Filter Change
1 Belt Change
1 Condenser Coil Cleaning
1 Cooling Comprehensive (with
Economizer)

Customer Tag Manufacturer Model # Serial #
RTU-1 Carrier 50AK-041-E-611HH 0590002569
RTU-2 Carrier 50AK-041-E-20884 3507U27225
RTU-3 Carrier 50AK-041-E-20884 3507U27229
RTU-4 Carrier 50AK-041-E-20884 3507U27220
RTU-5 Carrier 50AK-030-D-20885 3507U27218
RTU-6 Carrier 50AK-030-D-20885 3507U27227

Product: Contractor - Water Treatment
Quantity: 1
Coverage Level: Basic

Services Provided
1 Preventive Maintenance

Customer Tag Manufacturer Model # Serial #

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 15 of 95

VALENCIA LIBRARY

23743 VALENCIA BLVD
SANTA CLARITA, CA 91355-2105

Product: VAV Box, All Types
Quantity: 14
Coverage Level: Basic

Services Provided
2 Operational

Customer Tag Manufacturer Model # Serial #
(14) VAV Boxes Write-In FIELD UPDATE
NEEDED
1-13MR4UAZ/FIELD

UPDATE NEEDED

Product: Air Handling Unit (AHU), Mixed Air, 15-30 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Belt Change

Customer Tag Manufacturer Model # Serial #
A/C-3 Pace B-27 AF DWD1 94-75292-01

Product: Air Compressor/Dryer, Air Compressor, Commercial, <5 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Belt Change

Customer Tag Manufacturer Model # Serial #
Air Compressor Write-In FIELD UPDATE
NEEDED
1-13MR4UA4/FIELD

UPDATE NEEDED

Product: Air Handling Unit (AHU), Return Air, 15-30 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Belt Change
4 Standard Filter Change

Customer Tag Manufacturer Model # Serial #
RF-3 Pace B-24 FC DWD1 94-75292-02

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 16 of 95

VALENCIA LIBRARY

23743 VALENCIA BLVD
SANTA CLARITA, CA 91355-2105

Product: Split System, Cooling with Electric Heat, <7.5 Tons Quantity: 1
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
3 Operational (Mid Season -
Cooling/Heating)
1 Cooling Comprehensive

Customer Tag Manufacturer Model # Serial #
SPLIT IN SERVER ROOM Samsung FIELD UPDATE NEED SERVER ROOM

Product: Air Handling Unit (AHU), Variable Frequency Drive (VFD), <15 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
VFD#1 ABB ACS550-U1-012A-4 2062100469

Product: Air Handling Unit (AHU), Variable Frequency Drive (VFD), 15-30 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
VFD#2 ABB ACS550-U1-038A-4 2062101039

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 17 of 95

OLD TOWN NEWHALL LIBRARY

22601 LYONS AVE
SANTA CLARITA, CA 91321-2854

Product: VAV Box, All Types
Quantity: 29
Coverage Level: Basic

Services Provided
2 Operational

Customer Tag Manufacturer Model # Serial #
(29) VAV Boxes Write-In 1-13MTCI5E

Product: Boiler, Gas-Fired, High Efficiency, >10 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Fireside Cleaning (gaskets not
included)

Customer Tag Manufacturer Model # Serial #
Boiler 1 Parker Boiler TC210(L) 23195221902

Product: Cooling Tower, Spray Distribution, <300 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Tower Cleaning
1 Vibration Analysis (Fan)
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
CT-1 Evapco Company USS1948 11412631

Product: Fan, Exhaust Fan, Ceiling Mounted, 0 - 5HP
Quantity: 6
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Customer Tag Manufacturer Model # Serial #
EF-1 Greenheck Fan Corp SQ-90-D-K 1253400411110
EF-2 Greenheck Fan Corp BSQ-130HP-4-X 126346741110
EF-2 Write-In BSQ-130HP-4-X 12634674 1110
EF-6 Greenheck Fan Corp 1-18UIR2FW
EF-8 Greenheck Fan Corp SQ-80-D-X 126340041110
EF-8 Greenheck Fan Corp 1-143MF71I

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 18 of 95

OLD TOWN NEWHALL LIBRARY

22601 LYONS AVE
SANTA CLARITA, CA 91321-2854

Product: Packaged, Commercial, Self Contained, <40 Tons Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
4 Return Air Filter Change
1 Comprehensive
1 Belt Change

Customer Tag Manufacturer Model # Serial #
Elevator room AC Liebert NO INFO NO INFO

Product: Expansion Tank
Quantity: 3
Coverage Level: Basic

Services Provided
4 Operational

Customer Tag Manufacturer Model # Serial #
Expansion Tank #1 Armstrong A4000-L 689077
Expansion Tank #2 Wilkins XT-18 12052056104
Expansion Tank #3 Lochinvar Corporation SIT080 K11I00032944

Product: Heat Pump, Water Cooled, >15 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
1 Heating Comprehensive
2 Operational (Mid Season)
4 Standard Filter Change
1 Belt Change
1 Cooling Comprehensive

Customer Tag Manufacturer Model # Serial #
Heat Pump #1 Bosch EC120-4VTC 2940-556-000001-
7735037169

Product: Pump, Variable Frequency Drive (VFD), <15 HP
Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
Hot water pump #1 Yaskawa E7BBB007T3 NA
Hot water pump #2 Yaskawa E7BBB007T3 4W1192873880002

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 19 of 95

OLD TOWN NEWHALL LIBRARY

22601 LYONS AVE
SANTA CLARITA, CA 91321-2854

Product: Heater, Gas Infrared-All
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
IR Heater Write-In 1-13M3UWVD

Product: Pump, Hot Water, 0-10 HP
Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Vibration Analysis

Customer Tag Manufacturer Model # Serial #
P-1 Armstrong 4300522-083 1906
P-2 Armstrong 4300522-083 1918

Product: Pump, Condenser, 11-50 HP
Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Vibration Analysis

Customer Tag Manufacturer Model # Serial #
P-3 Armstrong 4300531-083 1547
P4 Armstrong 4300531-083 1549

Product: Split System, Cooling Only, <7.5 Tons
Quantity: 2
Coverage Level: Basic

Services Provided
1 Cooling Comprehensive
1 Condenser Coil Cleaning
3 Operational (Mid Season -
Cooling Only)

Customer Tag Manufacturer Model # Serial #
SCC-1 Mitsubishi MUY-D30NA-1 0001227
SCC-2 Mitsubishi MUT-D30NA-1 0001714

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 20 of 95

OLD TOWN NEWHALL LIBRARY

22601 LYONS AVE
SANTA CLARITA, CA 91321-2854

Product: Builtup Unit, Supply-Return Fan, 10-40HP
Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
4 Filters, Standard Pleated
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
SV-1 Aaon Inc SA-035-3-A-ER09-
000
201109-ASCM00122
SV-2 Aaon Inc SA-035-3-A-ER09-
000
201110-ASCM00123

Product: Cooling Tower, Variable Frequency Drive (VFD), 15-30 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
VFD FOR CT Yaskawa FIELD UPDATE
NEEDED
VFD FOR CT 1

Product: Contractor - Water Treatment
Quantity: 1
Coverage Level: Basic

Services Provided
1 Preventive Maintenance

Customer Tag Manufacturer Model # Serial #

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 21 of 95

PUBLIC WORKS CORP YARD

25663 AVENUE STANFORD
SANTA CLARITA, CA 91355-1103

Product: Split System, Cooling with Electric Heat, <7.5 Tons Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational (Mid Season -
Cooling/Heating)
1 Cooling Comprehensive
1 Condenser Coil Cleaning
4 Return Air Filter Change

Customer Tag Manufacturer Model # Serial #
AC-1 Mitsubishi MUZ-GE18MA 0004077T
AC2 Mitsubishi MUZ-GE18NA 2002082

Product: Roof Top Unit (RTU), Cooling/Electric Heating, with Economizer, <8 Tons Quantity: 7
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
4 Standard Filter Change
3 Operational (Mid Season -
Cooling/Heating with
Economizer)
1 Cooling Comprehensive (with
Economizer)

Customer Tag Manufacturer Model # Serial #
AC-1 Carrier 48VGNA3609060 3617C38300
AC-10 JCI_YORK PCG4B600652X2B W2F0911254
AC-2 Carrier 48VGNA4809060 3617C38324
AC-3 Carrier 48VGNA6009060 3617C38327
AC-4 Carrier 48VGNA6009060 3617C38328
AC-7 Carrier 48LCL004AZA6A0A0A
0 3617C85558
Ac-5 Carrier 48LCL006AZA6A0A0A
0 3517C85524

Product: Heat Pump, Air Cooled, 0-5 Tons
Quantity: 2
Coverage Level: Basic

Services Provided
1 Belt Change
2 Operational (Mid Season)
1 Cooling Comprehensive
1 Heating Comprehensive
4 Standard Filter Change
1 Condenser Coil Cleaning

Customer Tag Manufacturer Model # Serial #
AC-11 Carrier SUN FADED 1-18AONAPR
Ac-12 Thermal Zone TZAA-324-2A757 8342W081324831

Product: Fan, Exhaust Fan, Roof Mounted, 0-5 HP
Quantity: 17
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 22 of 95

PUBLIC WORKS CORP YARD

25663 AVENUE STANFORD
SANTA CLARITA, CA 91355-1103

Customer Tag Manufacturer Model # Serial #
AE 1 Greenheck Fan Corp SWB-36-50X. 93E00724
EF-1 Cook Fans 1-18APUHXU
EF-11 Cook Fans 1-18APTBV4
EF-2 Cook Fans 1-18APYL5A
EF-4N Greenheck Fan Corp SWB-36-50X 93E00725
EF-5N Greenheck Fan Corp SWB-36-50 93E00726
EF-7N Greenheck Fan Corp SWB-27-20X 93E00723
EF-9 Greenheck Fan Corp SWB-15-7 93E03756
EF-NB Greenheck Fan Corp SWB-15-7 93E03757
EF10 Cook Fans .EF10 _EF10
Exhaust Fans Write-In 1-13MSBHFH
NA Greenheck Fan Corp 1-18APQHL6
NA Cook Fans 120ACRU/ 120ACRU
B
138SE17139-02/0025804
Na Loren Cook Company 300CPS 1-18AQ75SI
Na Loren Cook Company 300CPS 1-18AQ64DQ
Na Loren Cook Company 300CPS 1-18APYLCS
Na Loren Cook Company 300CPS 057-1 1/2 - 1725/1140 3-
60-230

Product: Roof Top Unit (RTU), Cooling/Gas Heating, with Economizer, 15.5-25 Tons Quantity: 2
Coverage Level: Basic

Services Provided
2 Operational (Mid Season -
Cooling/Heating with
Economizer)
4 Standard Filter Change
1 Belt Change
1 Condenser Coil Cleaning
1 Cooling Comprehensive (with
Economizer)
1 Gas Heating Comprehensive
(with Economizer)

Customer Tag Manufacturer Model # Serial #
Ac-6 Carrier 48LCL004A2A6A0A0A
0 3617C85559
Ac-8 Carrier 48VGNB2404030TP 3617C04821

Product: Roof Top Unit (RTU), Cooling/Gas Heating, without Economizer, 25.5-60 Tons Quantity: 1
Coverage Level: Basic

Services Provided
1 Belt Change
1 Cooling Comprehensive
(without Economizer)
1 Condenser Coil Cleaning
2 Operational (Mid Season -
Cooling/Heating without
Economizer)
4 Standard Filter Change
1 Gas Heating Comprehensive
(without Economizer)

Customer Tag Manufacturer Model # Serial #
Ac-9 Carrier 48VGNB2404030TP 3417C03036

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 23 of 95

PUBLIC WORKS CORP YARD

25663 AVENUE STANFORD
SANTA CLARITA, CA 91355-1103

Product: Cooling Tower, Evaporative Condenser, <300 Tons Quantity: 9
Coverage Level: Basic

Services Provided
3 Operational
1 Vibration Analysis (Fan)
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
EC1 Adobe Aire DM120G E04252416
EC10 Champion Cooler
Company
AD200 AE710003
EC2 Adobe Aire DM120G D041212600
EC3 Adobe Aire DM120G E04252434
EC4 Adobe Aire DM120G D0412585
EC5 Adobe Aire DM120G D04121586
EC6 Champion Cooler
Company
AD200 AD7100009
EC7 Champion Cooler
Company
AD200 AD71500010
EC8 Champion Cooler
Company
AD200 AF7150002

Product: Terminal Product, Fan Coil Unit (FCU), Horizontal Air Flow, 300-1200 CFM Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
4 Air Filter Change
1 Belt Change
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
FC-11 Carrier FB4ANA030 2392H08395
Server Room unit Thermal Zone A18-00 9608134759

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 24 of 95

CHANNEL 20 PUBLIC ACCESS TV STUDIOS

22505 14TH ST
SANTA CLARITA, CA 91321-1500

Product: Roof Top Unit (RTU), Cooling Only, with Economizer, <8 Tons Quantity: 3
Coverage Level: Basic

Services Provided
3 Operational (Mid Season -
Cooling Only with Economizer)
1 Cooling Comprehensive (with
Economizer)
4 Standard Filter Change
1 Belt Change

Customer Tag Manufacturer Model # Serial #
AC-1 Rheem NO NAME PLATE
INFO

NO NAME PLATE INFO
AC-2 Rheem RPDC-101CLA 5044G41940457
Ac-3 Rheem RQPL-B024JK F041600925

Product: Heat Pump, Air Cooled, 5.5-10 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
4 Standard Filter Change
1 Condenser Coil Cleaning
1 Cooling Comprehensive
1 Heating Comprehensive
2 Operational (Mid Season)

Customer Tag Manufacturer Model # Serial #
AC-4 Bryant 582ANW036060NBAF 1704G31386

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 25 of 95

JAN HEIDT NEWHALL METROLINK STATION

24300 RAILROAD AVE
SANTA CLARITA, CA 91321

Product: Split System, Cooling Only, <7.5 Tons
Quantity: 2
Coverage Level: Basic

Services Provided
4 Return Air Filter Change
1 Condenser Coil Cleaning
3 Operational (Mid Season -
Cooling Only)
1 Cooling Comprehensive

Customer Tag Manufacturer Model # Serial #
AC-2 Carrier FB4ANF018000AFAA 2199A16467
Ac-1 Carrier FB4ANF018 2199A16461

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 26 of 95

SANTA CLARITA BUSINESS INCUBATOR

22704 9TH ST
SANTA CLARITA, CA 91321-2808

Product: Air Handling Unit (AHU), Mixed Air, <15 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Belt Change
4 Standard Filter Change

Customer Tag Manufacturer Model # Serial #
AHU 1 JCI_YORK AP-170 (4147) AHU-
1 CENM23268D

Product: Chiller, Air Cooled, Scroll, 10-40 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Condenser Coil Cleaning

Customer Tag Manufacturer Model # Serial #
Air Cooled Chiller Write-In YCAL0030EC28XCAS

DTXLXXBL
RENM008405

Product: Boiler, Gas-Fired, Atmospheric, 0-10 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Fireside Cleaning (gaskets not
included)

Customer Tag Manufacturer Model # Serial #
Boiler 1 Rbi Water Heaters DB0400NO2A2CA 050435148

Product: Condensing Unit, Air Cooled, Scroll, <10 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Condenser Coil Cleaning
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
CU-1 Mitsubishi MU-A09WA 2000666 T

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 27 of 95

SANTA CLARITA BUSINESS INCUBATOR

22704 9TH ST
SANTA CLARITA, CA 91321-2808

Product: Pump, Chilled Water, 0-10 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
CWP- 1 Bell & Gossett 346576 1SSF295D81

Product: Fan, Exhaust Fan, Roof Mounted, 0-5 HP
Quantity: 3
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Customer Tag Manufacturer Model # Serial #
EF-1 Greenheck Fan Corp GB-101HP-4-X 13716785
EF-2 Greenheck Fan Corp GB-071-6-X 13716786
EF-3 Jenn-Air 90CRU-JB 1-18S8NS70

Product: Expansion Tank
Quantity: 2
Coverage Level: Basic

Services Provided
4 Operational

Customer Tag Manufacturer Model # Serial #
ET-1 Wessels NB 93819 NA000
ET-2 Wessels 93813 1-18S7OIMA

Product: Heat Pump, Air Cooled, 0-5 Tons
Quantity: 2
Coverage Level: Basic

Services Provided
1 Heating Comprehensive
4 Standard Filter Change
1 Belt Change
2 Operational (Mid Season)
1 Condenser Coil Cleaning
1 Cooling Comprehensive

Customer Tag Manufacturer Model # Serial #
HP-1 Mitsubishi PUZ-A30NHA4 3ZU02021A
HP-2 Mitsubishi PUZ-A18NHA4 3ZU03409A

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 28 of 95

SANTA CLARITA BUSINESS INCUBATOR

22704 9TH ST
SANTA CLARITA, CA 91321-2808

Product: Pump, Hot Water, 0-10 HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
HWP-1 Armstrong 810119MF-003 0616

Product: Split System, Cooling Only, <7.5 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational (Mid Season -
Cooling Only)
4 Return Air Filter Change
1 Belt Change
1 Cooling Comprehensive
1 Condenser Coil Cleaning

Customer Tag Manufacturer Model # Serial #
Server room unit Mitsubishi MS-A09WA-1 4000160 T

Product: Air Handling Unit (AHU), Variable Frequency Drive (VFD), <15 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
VFD 1 Honeywell HVFDSDA30075G100 C151100906.

Product: Contractor - Water Treatment
Quantity: 1
Coverage Level: Basic

Services Provided
1 Preventive Maintenance

Customer Tag Manufacturer Model # Serial #

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 29 of 95

SANTA CLARITA BUSINESS INCUBATOR

22704 9TH ST
SANTA CLARITA, CA 91321-2808

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 30 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Product: Boiler, Gas-Fired, Water Tube, <50HP
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Fireside Cleaning (gaskets not
included)
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
Boiler 1 RayPak H3-0752 0410227322

Product: Heat Pump, Water Cooled, 0-5 Tons
Quantity: 12
Coverage Level: Basic

Services Provided
1 Cooling Comprehensive
4 Standard Filter Change
1 Belt Change
3 Operational (Mid Season)

Customer Tag Manufacturer Model # Serial #
CRAC-A-1. Server room Data Aire DTWD-0534 2004-3545-B
CRAC-A-2. Server room Data Aire DTWD-0534 2004-3546-B
HP-A-1 SE Quad interior zone Climate Master GLV080AFC3CCFTS G10630954 HP-A-11. E quad Hall ways Climate Master GLV100AFC3ECBTS G10630956 HP-A-2 squad exterior zone Climate Master GSV036AFC30TRTS G10626610 HP-A-3 sw squad interior zone Climate Master GLV100AFC3ECBTS G10630957 HP-A-4a Climate Master GSH048AFC30TLBS G10626683
HP-A-5 NW Quad Interior Zone Climate Master GLV080AFC3CCFTS G10630955 HP-A-6- NW quad exterior zone Climate Master GSV036AFC30TRTS G10626609 HP-A-7 NE Quad interior Zone Climate Master GSV060AFC30TLTS G11744214 RTU (HP-A-10) E Quad
Dispatch Area
Trane GERA06041C0300HP-
A10
W05D18426
RTU (HP-A-9) E Quad
Drivers Break room

Trane GERA12041CO200HP
-A-9
W05D18425

Product: Pump, Chilled Water, 0-10 HP
Quantity: 4
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
CT-pump Baltimore Aircoil BAC300210 SW03137BS-3/21
CWP-1 Bell & Gossett 1510 BF 7.750 CT3589-01 L40
CWP-2 Bell & Gossett 1510 BF 9.125 CT3586-02 K40
CWP-3 Bell & Gossett 1510 BF 9.125 CT3586-01 K40

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 31 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Product: Split System, Cooling with Electric Heat, <7.5 Tons Quantity: 11
Coverage Level: Basic

Services Provided
3 Operational (Mid Season -
Cooling/Heating)
1 Cooling Comprehensive
4 Return Air Filter Change
1 Condenser Coil Cleaning

Customer Tag Manufacturer Model # Serial #
CU-B-10 Fujitsu AOU9RL2 EXN 025480
CU-B-11 Carrier 38QR036C-321 1803X67443
CU-B-12 Carrier 38QR036C-321 1803X67440
CU-B-1
Maint conf room
Carrier 38BK009130 3004Y22217
CU-B-3 United Technologies
Carrier
38BK009130 3004122215
CU-B-4 Fujitsu AOU9RL2 EXN 017100
CU-B-5 Carrier 38GVQ009—1 3813V50543
CU-B-6 Carrier 38QR060C-611 5003X75603
CU-B-7 Carrier 38BK009130 3004Y22221
CU-B-8 Carrier UNKNOW 1-12SKX1O7
CU-B-9 Carrier 38BNE018311 2705V14107

Product: Computer Room Unit, with Water Cooled Condenser, <5 Tons Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
4 Standard Filter Change

Customer Tag Manufacturer Model # Serial #
Computer Room Unit #1 Write-In 1-13M9NN3E
Computer Room Unit #2 Write-In 1-13M9NN4S

Product: Cooling Tower, Variable Frequency Drive (VFD), 15-30 HP Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
Cooling Tower VFD Write-In 1-13M9NN9Y

Product: Fan, Exhaust Fan, Roof Mounted, 0-5 HP
Quantity: 30
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 32 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Customer Tag Manufacturer Model # Serial #
EF-A-10 Cook Fans 70 ACE 138S807079-00/0004601
EF-A-11 Cook Fans 80 ACE 138S807079-00/0005901
EF-A-12 Cook Fans 80 ACE 138S807079-00/0005902
EF-A-5 Cook Fans 135 ACE 138S807079-00/0000701.

EF-A-5 Cook Fans 135 ACE 138S807079-00/0000701
EF-A-6 Cook Fans 135 ACE 138S807079-00/0000702
EF-A-7 Cook Fans 120 ACE 138S807079-00/0002001
EF-A-8 Cook Fans 100 ACE 138S807079-00/0003301
EF-B-1 Cook Fans 225CPA 138S807079-01/0000701
EF-B-10 Cook Fans 380CPA. 138S812701-01/0000701.

EF-B-11 Cook Fans 210CPA 138S812701-01/0010802
EF-B-12 Cook Fans 120 CPV 120 CPV 138S812701-01/0008102 EF-B-13 Cook Fans 120 CPV 120 CPV 138S812701-01/0008103 EF-B-14 Cook Fans 150 CPV 150 CPV 138S812701-01/0002301 EF-B-16 Cook Fans 330 CPA 330 CPA 138S812701-01/0003601 EF-B-17 Cook Fans 270 CPA 270 CPA 138S812701-01/0005101 EF-B-18 Cook Fans 330 CPA 330 CPA 138S812701-01/0003602 EF-B-19 Cook Fans 330 CPA 330 CPA 138S812701-01/0003603 EF-B-2 Cook Fans 330 CPA 330 CPA 138S812701-01/0002101
EF-B-20 Cook Fans 270 CPA 270 CPA 138S812701-01/0005102 EF-B-21 Cook Fans 300CPV 138S812701-01/0006701
EF-B-22 Cook Fans 300 CPV 300 CPV 138S812701-01/0006702 EF-B-3 Cook Fans 100 ACE 100 C2B 138S812701-01/0000701
EF-B-4 Cook Fans 70 ACE 70C2B 138S812701-00/0002001
EF-B-5 Cook Fans 135 ACE 135C4B 138S812701-00/0003401
EF-B-6 Cook Fans 135 ACE 135C3B 138S812701-00/0004801
EF-B-7 Cook Fans 120 CPV 0008101
EF-B-9 Cook Fans 210 KPA 001 0801
HEFA1 Cook Fans 135 CPA 138S80709-01/0003501
PR30 Cook Fans 300 PR 138S81270100/0007306

Product: Fan, Exhaust Fan, Roof Mounted, >15 HP
Quantity: 1
Coverage Level: Basic

Services Provided
4 Operational

Customer Tag Manufacturer Model # Serial #
EF-B-8 Cook Fans 245 CPV 0009501

Product: Expansion Tank
Quantity: 1
Coverage Level: Basic

Services Provided
4 Operational

Customer Tag Manufacturer Model # Serial #
EXT-1 Bell & Gossett D 20 V 128039

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 33 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Product: Terminal Product, Fan Coil Unit (FCU), Horizontal Air Flow, 300-1200 CFM Quantity: 8
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
FC-B-1 United Technologies
Carrier
40QNE009100 3804Y30541
FC-B-10 Fujitsu ASU9RL2 EXA 027333
FC-B-3 United Technologies
Carrier
40QNE009100 3804Y30538
FC-B-4 Fujitsu ASU9RL2 EXA 017237
FC-B-5 Carrier 40GVQ009-1 0314V52289
FC-B-6 Carrier N 1-18U5G8DT
UV-B-11 Carrier 1-18TWUWOI
UV-B-12 Carrier 1-18TWR386

Product: Cooling Tower, Spray Distribution, <300 Tons
Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive
1 Tower Cleaning
1 Vibration Analysis (Fan)

Customer Tag Manufacturer Model # Serial #
FLC-002 Marley Cooling Towers LW032JB1 CT-2 FIELD UPDATE NEEDED
flc-001 Marley Cooling Towers LW032JB1 CT-1 FILED UPDATE NEEDED

Product: Heat Pump, Air Cooled, 0-5 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
1 Cooling Comprehensive
1 Heating Comprehensive
2 Operational (Mid Season)
4 Standard Filter Change

Customer Tag Manufacturer Model # Serial #
HP-A-13 NE QUAD IDF RM Climate Master GSH015BGC30TL85 G10627073

Product: Air Handling Unit (AHU), Make-Up Air Unit (MAU), <15 HP Quantity: 3 Services Provided

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 34 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Coverage Level: Basic

3 Operational
4 Standard Pleated Filter Change
1 Belt Change
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
MAU-B-1 Reznor HRPB125-8-S-2 EBDJ66XN007915
SF-A-5 Loren Cook Company 150SQIB 38S80707900
SF-A-6 Loren Cook Company 90SQIB 138S80707900

Product: Heater, Gas Infrared-All
Quantity: 15
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
RH-B-1 Reznor VR50 BDF80U2N25958X
RH-B-2 Reznor VR50 BDF80U2N2595
RH-B-3 Reznor VR50 BDF80U2N25959X
RH-B-4 Reznor VR50 BDF80U2N25961X
RH-B-5 Reznor VR50 BDI80U2N51330X
RH-B-6 Reznor VR50 BDJ80U2N54041X
UH-B-10 Reznor UDAP30 BDH79X7N4045ZX
UH-B-11 Reznor UDAP30 BDH79X7N4044ZX
UH-B-12 Reznor UDAP30 BDH79X7N40416X
UH-B-13 Reznor UDAP30 BDH79X7N40424X
UH-B-14 Reznor UDAP30 1-18U8262W
UH-B-15 Reznor UDAP30 BDH79X7N4041YX
UH-B-7 Reznor UDAP30 BDH79X7N40419X
UH-B-8 Reznor UDAP30 BDH79X7N4046ZX
UH-B-9 Reznor UDAP30 BDI79X7N49613X

Product: Furnace, All
Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
UH-B-5 Reznor UDAP30 BDH79X7N44292X

Product: Contractor - Water Treatment
Quantity: 1
Coverage Level: Basic

Services Provided
1 Preventive Maintenance

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 35 of 95

TRANSIT MAINTENANCE FACILITY

28250 CONSTELLATION RD
SANTA CLARITA, CA 91355-5000

Customer Tag Manufacturer Model # Serial #

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 36 of 95

JO ANNE DARCY LIBRARY

18601 SOLEDAD CANYON RD
SANTA CLARITA, CA 91351-3726

Product: Heat Pump, Air Cooled, 0-5 Tons
Quantity: 9
Coverage Level: Basic

Services Provided
2 Operational (Mid Season)
4 Standard Filter Change
1 Heating Comprehensive
1 Cooling Comprehensive
1 Condenser Coil Cleaning

Customer Tag Manufacturer Model # Serial #
C1 JCI_YORK PHE4B4831B W2N0519753
C2 JCI_YORK PHE4B4831B W2A1519792
C3 JCI_YORK PHE4B4831B W2A1519842
L1 JCI_YORK PHE4B6031B W2A1520304
L2 JCI_YORK PHE4B6034A W2H1340223
L4 JCI_YORK PHE4B6031B W2A1520310
L5 JCI_YORK PHE4B6034A W2H1340220
L6 JCI_YORK PHE4B6031B W2A1520296
L7 JCI_YORK PHE4A2424A W2E1044470

Product: Heat Pump, Air Cooled, 5.5-10 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
1 Cooling Comprehensive
1 Condenser Coil Cleaning
4 Standard Filter Change
2 Operational (Mid Season)
1 Heating Comprehensive

Customer Tag Manufacturer Model # Serial #
L3 JCI_YORK XXE08A2B3AA1A111
A2
N2N0518895

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 37 of 95

OLD TOWN NEWHALL PARKING STRUCTURE

9TH ST
SANTA CLARITA, CA 91321

Product: Split System, Cooling Only, <7.5 Tons
Quantity: 5
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
3 Operational (Mid Season -
Cooling Only)
1 Cooling Comprehensive

Customer Tag Manufacturer Model # Serial #
CU 1 Carrier 24AHA436A300 117X25238
CU 2 Carrier 24AHA436A300 1917X97446
CU 3 Carrier 24AHA436A300 1117X25214
SFC 1 Cac/Bdp 40MKCB32B—3 0317V00173
SFC 2 Carrier 40MKCB32B—3 0317V00170

Product: Fan, Exhaust Fan, Ceiling Mounted, 0 - 5HP
Quantity: 3
Coverage Level: Basic

Services Provided
4 Operational
1 Belt Change

Customer Tag Manufacturer Model # Serial #
EF 1 Cook Fans 330 SQN 138SG96852-00/0000701
EF-2 Cook Fans 70 SQN 138SG96852-00/0002101
SF 1 Cook Fans 19580NB 1388G96852-00Z0003901

Product: Air Handling Unit (AHU), Variable Frequency Drive (VFD), <15 HP Quantity: 2
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Customer Tag Manufacturer Model # Serial #
EF 1 VFD Yaskawa CIMR-ZU4A0011FAA 1W1741501730001
SF 1 VFD Yaskawa CIMR-ZU4A0005FAA 1W1731474540001

Product: Terminal Product, Fan Coil Unit (FCU), Horizontal Air Flow, 300-1200 CFM Quantity: 1
Coverage Level: Basic

Services Provided
3 Operational
1 Comprehensive

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 38 of 95

OLD TOWN NEWHALL PARKING STRUCTURE

9TH ST
SANTA CLARITA, CA 91321

Customer Tag Manufacturer Model # Serial #
SFC-3 Cac/Bdp 1-18UHWBKU

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 39 of 95

SANTA CLARITA METROLINK STATION

22122 SOLEDAD CANYON RD
SANTA CLARITA, CA 91350-2627

Product: Split System, Cooling with Electric Heat, <7.5 Tons Quantity: 1
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
1 Cooling Comprehensive
3 Operational (Mid Season -
Cooling/Heating)
4 Return Air Filter Change

Customer Tag Manufacturer Model # Serial #
Metrolink Station Split System Trane 4A6H6036H1000AD 21484MW64F

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 40 of 95

VIA PRINCESSA METROLINK STATION

19201 VIA PRINCESSA
SANTA CLARITA, CA 91350

Product: Heat Pump, Air Cooled, 0-5 Tons
Quantity: 1
Coverage Level: Basic

Services Provided
4 Standard Filter Change
1 Condenser Coil Cleaning
1 Cooling Comprehensive
3 Operational (Mid Season)

Customer Tag Manufacturer Model # Serial #
Mini split Carrier 38MVQ009- - - 1 0308V02307

Product: Split System, Cooling with Electric Heat, <7.5 Tons Quantity: 1
Coverage Level: Basic

Services Provided
1 Condenser Coil Cleaning
1 Cooling Comprehensive
3 Operational (Mid Season -
Cooling/Heating)
4 Return Air Filter Change

Customer Tag Manufacturer Model # Serial #
Via Princessa Split System Carrier 40MVQ009 - - -1 1708V16388

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 41 of 95

Equipment tasking

Air Compressor/Dryer, Air Compressor, Commercial, 5-20 HP

Belt Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Perform belt change procedures
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Drain condensate from tank and check traps
Check safety relief valve
Check condition of pulley and belts (if applicable)
Inspect air filters and wash or replace as needed
Replace oil in compressor and check for proper level
Lubricate motor bearings (per manufacturer's recommendations) Check PE switch and starter
Check pressure reducing station for proper operation
Inspect pressure reducing station filters and clean or replace as required Check for proper operation of air drier
Check air drier condenser coil
Brush air dryer, condenser and cover grills as required Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Drain condensate from tank and check traps
Check safety relief valve
Check condition of pulley and belts (if applicable)
Inspect air filters
Check for proper oil level in compressor
Lubricate motor bearings (per manufacturer's recommendations) Check PE switch and starter
Check pressure reducing station for proper operation
Check for proper operation of air drier
Check air drier condenser coil
Brush air dryer, condenser and cover grills as required Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Air Compressor/Dryer, Air Compressor, Commercial, <5 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 42 of 95

Air Handling Unit (AHU), Make-Up Air Unit (MAU), <15 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 43 of 95

Standard Filter Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Standard Pleated Filter
Change
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Visually inspect damper(s)
Check condition of pulleys and belts
Check for proper fan operation
Check condition of coils
Check condition of filters
Record temperatures and pressures (if applicable)
Check for unusual noise and vibration
Check for deterioration of gaskets and seals
Check overall condition of unit
Visually inspect for fluid leaks of coils and connecting piping Check starter/contactor
Check and tighten electrical connections
Check damper operation and lubricate as required
Visually check control valve(s)
Lubricate blower and motor bearings
Clean condensate pan and clear drain line
Check condition of blower assembly
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 44 of 95

Record temperatures and pressures (if applicable)
Check condensate drain
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Visually inspect for fluid leaks of coils and connecting piping Document tasks performed during visit and report any observations to appropriate customer representative

Air Handling Unit (AHU), Mixed Air, 15-30 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 45 of 95

Check for unusual noise and vibration
Check overall condition of unit
Visually inspect for fluid leaks of coils and connecting piping Document tasks performed during visit and report any observations to appropriate customer representative

Air Handling Unit (AHU), Mixed Air, <15 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 46 of 95

Verify damper operation
Check condition of pulleys and belts
Check for proper fan operation
Check condition of coils
Check condition of filters
Record temperatures and pressures (if applicable)
Check condensate drain
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Visually inspect for fluid leaks of coils and connecting piping Document tasks performed during visit and report any observations to appropriate customer representative

Air Handling Unit (AHU), Return Air, 15-30 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 47 of 95

appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Inspect motor mounting isolators
Check for integrity of cabinet hardware
Visually inspect damper(s)
Verify damper operation
Check condition of pulleys and belts
Check for proper fan operation
Check condition of coils
Check condition of filters
Record temperatures and pressures (if applicable)
Check condensate drain
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Visually inspect for fluid leaks of coils and connecting piping Document tasks performed during visit and report any observations to appropriate customer representative

Air Handling Unit (AHU), Return Air, 35-60 HP

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 48 of 95

Check and tighten electrical connections
Check damper operation and lubricate as required
Visually check control valve(s)
Lubricate blower and motor bearings
Clean condensate pan and clear drain line
Check condition of blower assembly
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Air Handling Unit (AHU), Variable Frequency Drive (VFD), 15-30 HP

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check for heat damage
Review event log (if applicable)
Ramp drive up and down, and check for proper operation (if possible) Check condition of air filter and clean or replace as needed Verify proper operation of cooling fans and clean as needed Check for unusual noise or vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check drive for proper operation
Review event log (if applicable)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 49 of 95

Air Handling Unit (AHU), Variable Frequency Drive (VFD), <15 HP

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check for heat damage
Review event log (if applicable)
Ramp drive up and down, and check for proper operation (if possible) Check condition of air filter and clean or replace as needed Verify proper operation of cooling fans and clean as needed Check for unusual noise or vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check drive for proper operation
Review event log (if applicable)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Boiler, Gas-Fired, Atmospheric, 0-10 HP

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Blow down boiler
Check for proper operation of low and high gas pressure cut-out switches Check factory supplied gas piping and components for leakage Check burner for proper sequence of operation
Check flame quality
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot
Check boiler relief valves for leakage
Check combustion damper operation (if applicable)
Check operation of primary boiler pump (if applicable)
Verify proper operation of low water cut-out control
Check hot water/steam temperature and pressure
Check proper operation of make-up water valv
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 50 of 95

Check and tighten electrical connections
Check for proper gas supply pressure
Check and clean pilot assembly
Clean combustion fan wheel
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot - clean as needed
Check burner for proper sequence of operation
Check operating controls
Check all safety controls
Lift relief valve to ensure proper operation
Check boiler relief valves for leakage
Check combustion damper operation (if applicable)
Check operation of primary boiler pump (if applicable)
Check factory supplied gas piping and components for leakage Drain boiler, open hand hole covers and clean as needed (if applicable) Disassemble and clean low water cut-out
Fill boiler and check for proper operation of make-up water valve Verify proper operation of low water cut-out control
Check overall condition of unit
Record and log all operating parameters (including pressures and temperatures)
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Fireside Cleaning
(gaskets not included)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Remove access panels
Brush fireside surfaces
Reinstall access panels
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Boiler, Gas-Fired, Fire Tube, <50 HP

Combustion Analysis All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Perform combustion analysis procedures
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 51 of 95

Check hot water/steam temperature and pressure
Check proper operation of make-up water valv
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Inspect burner contactors for wear
Check and tighten electrical connections
Check for proper gas supply pressure
Check and clean pilot assembly
Clean combustion fan wheel
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot - clean as needed
Check burner for proper sequence of operation
Check operating controls
Check all safety controls
Lift relief valve to ensure proper operation
Check boiler relief valves for leakage
Check combustion blower motor operation and lubricate as needed Check factory supplied gas piping and components for leakage Drain boiler, open hand hole covers and clean as needed (if applicable) Disassemble and clean low water cut-out
Fill boiler and check for proper operation of make-up water valve Verify proper operation of low water cut-out control
Check overall condition of unit
Record and log all operating parameters (including pressures and temperatures)
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Boiler, Gas-Fired, High Efficiency, >10 HP

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Blow down boiler
Inspect condensate piping , trap and drain
Check for proper operation of low and high gas pressure cut-out switches Check factory supplied gas piping and components for leakage Check burner for proper sequence of operation
Check flame quality
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot
Check boiler relief valves for leakage
Verify proper operation of low water cut-out control
Check combustion blower motor operation
Check hot water/steam temperature and pressure
Check proper operation of make-up water valv
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 52 of 95

policies
Check with appropriate customer representative for operational deficiencies Inspect burner contactors for wear
Check and tighten electrical connections
Check for proper gas supply pressure
Check and clean pilot assembly
Clean combustion fan wheel
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot - clean as needed
Check burner for proper sequence of operation
Check operating controls
Check all safety controls
Inspect condensate piping , trap and drain
Lift relief valve to ensure proper operation
Check boiler relief valves for leakage
Check combustion blower motor operation and lubricate as needed Check factory supplied gas piping and components for leakage Drain boiler, open hand hole covers and clean as needed (if applicable) Disassemble and clean low water cut-out
Fill boiler and check for proper operation of make-up water valve Verify proper operation of low water cut-out control
Check overall condition of unit
Record and log all operating parameters (including pressures and temperatures)
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Boiler, Gas-Fired, Water Tube, <50HP

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Blow down boiler
Check for proper operation of low and high gas pressure cut-out switches Check factory supplied gas piping and components for leakage Check burner for proper sequence of operation
Check flame quality
Visually inspect combustion chamber, draft diverter and flue for accumulation of soot
Check boiler relief valves for leakage
Verify proper operation of low water cut-out control
Check combustion blower motor operation
Check hot water/steam temperature and pressure
Check proper operation of make-up water valv
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 53 of 95

Builtup Unit, Supply-Return Fan, 10-40HP

Comprehensive Check with appropriate customer representative for operational deficiencies Check operation of control system and dampers
Check safeties
Check sheaves and pulleys for wear and alignment
Check step controller (as applicable)
Check and tighten bolts, set screws and collars
Check supply and control air pressures
Check thermal cutout on electric heaters (as applicable) Clean area around equipment
Clean starter and cabinet
Check and tighten electrical connections
Inspect fan wheel and shaft for wear
Log operating conditions system stabilizer
Lube fan shaft and motor bearings
Motor lead megohm test
Test high static pressure

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 54 of 95

Check belt guard
Test low static pressure
Test low temperature safety devices
Check belts and adjust tension
Perform Annual Comprehensive maintenance tasks in addition to inspection and testing procedures
Check condition of contacts
Check contactors for free and smooth operation
Check damper wear, security and linkage
Check fan blades
Check fan and motor bearings
Complete any required maintenance checklists, report observations to appropriate customer representative

Filters, Standard
Pleated
Check with appropriate customer representative for operational deficiencies Replace air filters per agreement
Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Complete any required maintenance checklists, report observations to appropriate customer representative

Operational Check with appropriate customer representative for operational deficiencies Check sheaves and pulleys for wear and alignment
Check supply and control air pressures
Clean area around equipment
Check and tighten electrical connections
Inspect fan wheel and shaft for wear
Test high static pressure
Check belt guard
Test low static pressure
Test low temperature safety devices
Check belts and adjust tension
Check condition of contacts
Check contactors for free and smooth operation
Check fan blades
Check fan and motor bearings
Complete any required maintenance checklists, report observations to appropriate customer representative

Chiller, Air Cooled, Scroll, 10-40 Tons

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Spray coil(s) with chemical solution
Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 55 of 95

Check for proper chilled water flow
Check system pressures and temperatures
Check refrigerant charge (sight glass)
Check for proper capacity control operation
Check for proper crank case heater operation (if applicable) Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Check for proper condenser fan operation
Check overall condition of unit
Record and log all operating parameters
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories Check for visual signs of refrigerant/oil leak(s)
Conduct refrigerant leak check
Check for proper crank case heater operation (if applicable) Perform lock-out and tag-out procedure
Inspect condenser fan and compressor contactors for wear Check and tighten electrical connections
Perform preventative procedures to flow proving devices Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Computer Room Unit, with Water Cooled Condenser, <5 Tons

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories Check for proper humidifier operation
Check humidifier pan for signs of debris
Check water make-up valve for leaks
Check blower motor operation
Check condition of pulley and belts
Check dry cooler fan motors and blades (if applicable)
Check the dry cooler coil for debris (if applicable)
Visually check for glycol leaks (if applicable)
Check condition of evaporator coil
Check condition of filters

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 56 of 95

Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical components for signs of over heating Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for proper humidifier operation
Check humidifier pan for signs of debris
Clean humidifier pan (if applicable)
Replace humidifier canister or quartz bulbs (customer provided) Conduct refrigerant leak check
Lubricate blower and motor bearings
Check and tighten electrical connections
Check contactor(s)
Check operating controls
Check water make-up valve for leaks
Check blower motor operation
Check condition and alignment of pulley and belts
Check condition of evaporator coil
Check condition of dry cooler coil (applicable)
Check condition of filters
Clean condensate pan and clear drain line
Check operation of reheat function
Visually check for glycol leaks (if applicable)
Check for unusual noise and vibration
Check overall condition of unit
Record and log all operating parameters
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Condensing Unit, Air Cooled, Scroll, <10 Tons

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Condenser Coil
Cleaning (with louvers)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 57 of 95

Review control panel for proper operation and recorded fault histories Check refrigerant charge (sight glass)
Check for proper crank case heater operation (if applicable) Check for visual signs of refrigerant/oil leak(s)
Check for proper condenser fan operation
Check for unusual noise and vibration
Check overall condition of unit
Record and log all operating parameters
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories Check for visual signs of refrigerant/oil leak(s)
Conduct refrigerant leak check
Check for proper crank case heater operation (if applicable) Perform lock-out and tag-out procedure
Inspect condenser fan and compressor contactors for wear Check and tighten electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Record and log all operating parameters
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Tower, Evaporative Condenser, <300 Tons

Vibration Analysis (Fan) All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Record equipment specific information for reference
Install pads and labels (if applicable)
Install sensors in proper location.

Start equipment and run at normal operating conditions.

Record readings and remove sensors.

Submit readings for report generation and deliver to customer with recommendations.

Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of sump and basin
Check for proper operation of make up water controller and adjust as needed Disassemble and clean sump level sensor (if applicable) Check for proper condenser water temperature control (if applicable) Check operation of bypass valve (if applicable)
Check for spray nozzle blockage
Check fan mechanical drive system and lubricate per manufacturer's recommendation
Check belt(s) (if applicable)
Check and tighten electrical connections
Check operation of basin heater (if applicable)

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 58 of 95

Check tower sump screens
Check for proper sump pump operation
Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of sump and basin
Check for proper operation of make up water controller
Check for proper condenser water temperature control (if applicable) Check operation of bypass valve (if applicable)
Check condition of heat transfer section
Check for spray nozzle blockage
Check fan mechanical drive system
Check belt(s) (if applicable)
Check operation of basin heater (if applicable)
Check for proper sump pump operation
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Tower, Spray Distribution, <300 Tons

Start equipment and run at normal operating conditions.

Record readings and remove sensors.

Submit readings for report generation and deliver to customer with recommendations.

Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of sump and basin
Check for proper operation of make up water controller and adjust as needed Disassemble and clean sump level sensor (if applicable) Check for proper condenser water temperature control (if applicable) Check operation of bypass valve (if applicable)
Check condition of tower fill
Check for spray nozzle blockage
Check fan mechanical drive system and lubricate per manufacturer's recommendation
Check belt(s) (if applicable)
Check and tighten electrical connections
Check operation of basin heater (if applicable)
Check tower sump screens

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 59 of 95

Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of sump and basin
Check for proper operation of make up water controller
Check for proper condenser water temperature control (if applicable) Check operation of bypass valve (if applicable)
Check condition of tower fill
Check for spray nozzle blockage
Check fan mechanical drive system
Check belt(s) (if applicable)
Check operation of basin heater (if applicable)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Tower Cleaning All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Drain tower and basin
Remove soot and debris
Clean basin
Fill tower and basin
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Tower, Variable Frequency Drive (VFD), 15-30 HP

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check for heat damage
Review event log (if applicable)
Ramp drive up and down, and check for proper operation (if possible) Check condition of air filter and clean or replace as needed Verify proper operation of cooling fans and clean as needed Check for unusual noise or vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 60 of 95

Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Expansion Tank

Operational Check with appropriate customer representative for operational deficiencies Check for leaks
Check for proper air cushion
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Fan, Exhaust Fan, Ceiling Mounted, 0 - 5HP

Operational Check with appropriate customer representative for operational deficiencies Check rain guard
Check and tighten electrical connections
Clean area around equipment
Inspect starter
Lubricate as required
Motor operating amps
Check belt guard
Check belt(s) (if applicable)
Check drive condition
Check electrical contacts
Check fan blades
Check for proper rotation
Complete any required maintenance checklists, report observations to appropriate customer representative

Fan, Exhaust Fan, Roof Mounted, 0-5 HP

Operational Check with appropriate customer representative for operational deficiencies Check rain guard
Check and tighten electrical connections
Clean area around equipment
Inspect starter

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 61 of 95

Lubricate as required
Motor operating amps
Check belt guard
Check belt(s) (if applicable)
Check drive condition
Check electrical contacts
Check fan blades
Check for proper rotation
Complete any required maintenance checklists, report observations to appropriate customer representative

Fan, Exhaust Fan, Roof Mounted, >15 HP

Furnace, All

Comprehensive Check with appropriate customer representative for operational deficiencies Cycle thermostat and check for proper operation
Check fan operation
Check for unusual noise or vibration
Check condition and operation of electric heat coil (if applicable) Check condition of heat exchanger and flue (if applicable) Check operation of gas power vents (if applicable)
Inspect, clean and test operation of gas train valves, pilot/igniter assemblies and burner (if applicable)
Check gas piping for leaks (if applicable)
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Operational Check with appropriate customer representative for operational deficiencies Cycle thermostat and check for proper operation
Check fan operation
Check for unusual noise or vibration
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Heat Pump, Air Cooled, 0-5 Tons

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 62 of 95

Operational (Mid
Season)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Check condition of pulley and belts
Check heating operation (when applicable)
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 63 of 95

Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heating Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check operation of heating mode
Check and tighten electrical connections
Check contactor(s)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heat Pump, Air Cooled, 5.5-10 Tons

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 64 of 95

Check condenser fan motors and blades
Check blower motor operation
Check condition of pulley and belts
Check heating operation (when applicable)
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check and tighten electrical connections
Check contactor(s)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 65 of 95

Check condition and alignment of pulley and belts
Check condition of filters
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heat Pump, Water Cooled, 0-5 Tons

Operational (Mid
Season)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of evaporator coil
Check for proper condenser water flow
Check blower motor operation
Check condition of pulley and belts
Check heating operation (when applicable)
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 66 of 95

Check condition of evaporator coil
Check for proper condenser water flow
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heat Pump, Water Cooled, >15 Tons

Operational (Mid
Season)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of evaporator coil
Check for proper condenser water flow
Check blower motor operation
Check condition of pulley and belts
Check heating operation (when applicable)
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive All work must be performed in accordance with Johnson Controls safety policies

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 67 of 95

Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check and tighten electrical connections
Check contactor(s)
Check condition of evaporator coil
Check for proper condenser water flow
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heating Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check operation of heating mode
Check for proper condenser water flow
Check and tighten electrical connections
Check contactor(s)
Check condition of evaporator coil
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Heater, Gas Infrared-All

Comprehensive Check with appropriate customer representative for operational deficiencies Check operating and safety controls, adjust as needed
Clean pilot assembly, including electrode spark gap, orifice, and ignition wire Check and tighten electrical connections
Inspect for leaks and report
Check alignment of thermo-sensor bulb
Check and clean pilot sight glass
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Operational Check with appropriate customer representative for operational deficiencies Check operating and safety controls, adjust as needed

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 68 of 95

Clean pilot assembly, including electrode spark gap, orifice, and ignition wire Check and tighten electrical connections
Inspect for leaks and report
Check alignment of thermo-sensor bulb
Check and clean pilot sight glass
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Packaged, Commercial, Self Contained, <40 Tons

Return Air Filter Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Evaporator Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Clean condensate drain (if necessary)
Spray coil(s) with chemical solution
Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for proper condenser water flow
Check condition of evaporator coil
Check blower motor operation
Check condition of pulley and belts
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 69 of 95

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check VFD operation and clean cooling fan intake (if applicable) Check contactor(s)
Check for proper condenser water flow
Check condition of evaporator coil
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Pump, Chilled Water, 0-10 HP

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check coupling
Lubricate pump and motor bearing(s) per manufacturer's recommendation Record and log all operating parameters
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check pressures
Visually inspect coupling
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Pump, Condenser, 11-50 HP

Vibration Analysis All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Record equipment specific information for reference
Install pads and labels (if applicable)
Install sensors in proper location.

Start equipment and run at normal operating conditions.

Record readings and remove sensors.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 70 of 95

Submit readings for report generation and deliver to customer with recommendations.

Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check coupling
Lubricate pump and motor bearing(s) per manufacturer's recommendation Record and log all operating parameters
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check pressures
Visually inspect coupling
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Pump, Hot Water, 0-10 HP

Start equipment and run at normal operating conditions.

Record readings and remove sensors.

Submit readings for report generation and deliver to customer with recommendations.

Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check coupling
Lubricate pump and motor bearing(s) per manufacturer's recommendation Record and log all operating parameters
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 71 of 95

policies
Check with appropriate customer representative for operational deficiencies Check for leaks
Check pressures
Visually inspect coupling
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Pump, Variable Frequency Drive (VFD), <15 HP

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check for heat damage
Review event log (if applicable)
Ramp drive up and down, and check for proper operation (if possible) Check condition of air filter and clean or replace as needed Verify proper operation of cooling fans and clean as needed Check for unusual noise or vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check drive for proper operation
Review event log (if applicable)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Roof Top Unit (RTU), Cooling Only, with Economizer, 25.5-60 Tons

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 72 of 95

Document tasks performed during visit and report any observations to appropriate customer representative

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive
(with Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check and tighten electrical connections
Check VFD operation and clean cooling fan intake (if applicable) Check contactor(s)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check economizer operation
Lubricate and adjust economizer damper linkages
Verify proper operation of exhaust motor (if applicable) Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational (Mid
Season - Cooling Only
with Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Check economizer operation
Check condition of pulley and belts
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 73 of 95

Roof Top Unit (RTU), Cooling Only, with Economizer, <8 Tons

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 74 of 95

Check economizer operation
Check condition of pulley and belts
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Roof Top Unit (RTU), Cooling/Electric Heating, with Economizer, <8 Tons

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 75 of 95

appropriate customer representative

Operational (Mid
Season -
Cooling/Heating with
Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Check economizer operation
Check heating operation (when applicable)
Check condition of pulley and belts
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Roof Top Unit (RTU), Cooling/Gas Heating, with Economizer, 15.5-25 Tons

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 76 of 95

applicable)
Check and tighten electrical connections
Check VFD operation and clean cooling fan intake (if applicable) Check contactor(s)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check economizer operation
Lubricate and adjust economizer damper linkages
Verify proper operation of exhaust motor (if applicable) Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Gas Heating
Comprehensive (with
Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check combustion blower motor operation
Check igniter and pilot operation
Check condition of heat exchanger
Check condition of burners and clean as required in place Check for proper venting
Check for leaks on gas line (within cabinet)
Check condition of pulley and belts
Check economizer operation
Lubricate and adjust economizer damper linkages
Verify proper operation of exhaust motor (if applicable) Check condition of filters
Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 77 of 95

Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Roof Top Unit (RTU), Cooling/Gas Heating, without Economizer, 25.5-60 Tons

Condenser Coil
Cleaning
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Rinse coil(s) thoroughly with water
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive
(without Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check and tighten electrical connections
Check VFD operation and clean cooling fan intake (if applicable) Check contactor(s)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings
Check condition and alignment of pulley and belts
Check condition of filters
Clean condensate pan and clear drain line
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 78 of 95

Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Gas Heating
Comprehensive (without
Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check combustion blower motor operation
Check igniter and pilot operation
Check condition of heat exchanger
Check condition of burners and clean as required in place Check for proper venting
Check for leaks on gas line (within cabinet)
Check condition of pulley and belts
Check condition of filters
Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational (Mid
Season -
Cooling/Heating without
Economizer)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Review control panel for proper operation and recorded fault histories (if applicable)
Check condition of condenser coil
Check condition of evaporator coil
Check condenser fan motors and blades
Check blower motor operation
Check heating operation (when applicable)
Check condition of pulley and belts
Check condition of filters
Check condensate drain
Check for visual signs of refrigerant/oil leak(s)
Visually inspect electrical connections
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Split System, Cooling Only, <7.5 Tons

Return Air Filter Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Turn equipment off

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 79 of 95

Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check condition of condenser coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings (if applicable)
Check condition and alignment of pulley and belts (if applicable) Check condition of filters
Clean condensate pan and clear drain line (if readily accessible) Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational (Mid
Season - Cooling Only)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of condenser coil
Check condenser fan motors and blades
Check condensing unit electrical connections and contactor(s) Check blower motor operation
Check condition of filters
Check condition of pulley and belts (if applicable)
Check condensate system
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Split System, Cooling with Electric Heat, <7.5 Tons

Return Air Filter Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 80 of 95

Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check condition of condenser coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings (if applicable)
Check condition and alignment of pulley and belts (if applicable) Check condition of filters
Clean condensate pan and clear drain line (if readily accessible) Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational (Mid
Season -
Cooling/Heating)
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of condenser coil
Check condenser fan motors and blades
Check condensing unit electrical connections and contactor(s) Check blower motor operation
Check heating operation (when applicable)
Check condition of filters
Check condition of pulley and belts (if applicable)
Check condensate system
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Split System, Cooling with Gas Heat, <7.5 Tons

Return Air Filter Change All work must be performed in accordance with Johnson Controls safety

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 81 of 95

policies
Check with appropriate customer representative for operational deficiencies Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Gas Heating
Comprehensive
All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check combustion blower motor operation
Check igniter and pilot operation
Check condition of heat exchanger
Check condition of burners and clean as required in place Check for proper venting
Check for leaks on gas line (within cabinet)
Check condition of pulley and belts (if applicable)
Check condition of filters
Check for unusual noise and vibration
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Cooling Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check contactor(s)
Check condition of condenser coil
Check condenser fan motors and blades
Check blower motor operation
Lubricate blower and motor bearings (if applicable)
Check condition and alignment of pulley and belts (if applicable) Check condition of filters
Clean condensate pan and clear drain line (if readily accessible) Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Record and log all operating parameters
Check overall condition of unit
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 82 of 95

Check condition of pulley and belts (if applicable)
Check condensate system
Check for visual signs of refrigerant/oil leak(s)
Check for unusual noise and vibration
Check overall condition of unit
Document tasks performed during visit and report any observations to appropriate customer representative

Terminal Product, Fan Coil Unit (FCU), Horizontal Air Flow, 300-1200 CFM

Air Filter Change All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Turn equipment off
Remove dirty filters
Install new filters
Turn equipment on
Dispose of dirty filter appropriately
Document tasks performed during visit and report any observations to appropriate customer representative

Comprehensive All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check for proper fan operation
Check condition of coils
Check condition of filters
Record temperatures
Check fan contactor/relay
Check and tighten electrical connections
Clean condensate pan and clear drain line
Check condition of pulley and belts (if applicable)
Visually check control valve(s)
Lubricate blower and motor bearings (if applicable)
Check condition of blower assembly
Remove and dispose any debris from any maintenance activity Document tasks performed during visit and report any observations to appropriate customer representative

Operational All work must be performed in accordance with Johnson Controls safety policies
Check with appropriate customer representative for operational deficiencies Check condition of pulley and belts (if applicable)
Check condition of coils
Check condition of filters
Check condensate drain
Check for unusual noise and vibration
Check unit for proper operation
Check overall condition of unit

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 83 of 95

Document tasks performed during visit and report any observations to appropriate customer representative

VAV Box, All Types

Comprehensive Check with appropriate customer representative for operational deficiencies Check and tighten electrical connections
Check damper and linkage
Cycle thermostat and check for proper operation
Check for leaks in air supply (if applicable)
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Operational Check with appropriate customer representative for operational deficiencies Check temperature
Check damper and linkage
Cycle thermostat and check for proper operation
Check for leaks in air supply (if applicable)
Check fan operation
Clean area around equipment
Complete any required maintenance checklists, report observations to appropriate customer representative

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 84 of 95

Supplemental Price & Payment Terms (Applies to Multi-Year Contracts Only)

Year Total Annual Dollar Amount Payment Frequency Year1 $181,842.00 Monthly

OPTION YEAR 2 $196,390.00 Monthly

OPTION YEAR 3 $212,101.00 Monthly

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 85 of 95

Special Additions and Exceptions

-"This proposal is in accordance with the Johnson Controls Sourcewell Contract #070121-JHN" -See Exhibit A for as needed repairs

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 86 of 95

TERMS AND CONDITIONS
DEFINITIONS (REV 4/22)

DIGITAL ENABLED SERVICES mean services provided hereunder that employ JCI software and cloud-hosted software offerings and tools to improve and enable such services. Digital Enabled Service may include, but are not limited to, (a) remote inspection, (b) advanced equipment fault detection and diagnostics, and (c) data dashboarding and health reporting.

CONTRACT PRICE means the price that Customer shall pay to JCI for the Services.

COVERED EQUIPMENT means the equipment for which Services are to be provided under this Agreement. Covered Equipment is set forth in Schedule A - Equipment List.

EQUIPMENT FAILURE means the failure, under normal and expected working conditions, of moving parts or electric or electronic components of the Covered Equipment that are necessary for its operation.

PREMISES means those Customer premises where the Covered Equipment is located or Services performed pursuant to this Agreement.

REMOTE MONITORING SERVICES means remote monitoring of Covered Equipment and/or systems including building automation, HVAC equipment, and fire alarm, intrusion, and/or other life safety systems for alarm and event notifications using a UL Certified Central Station.

REMOTE OPERATIONS CENTER (ROC) is the department at JCI that remotely monitors alarm and industrial (HVAC) process signals.

REMOTE OPERATING SERVICES means remote interrogation, modification and/or operation of building automation, HVAC equipment, and/or other Covered Equipment.

REPAIR LABOR is the labor necessary to restore Covered Equipment to working condition following an Equipment Failure, but does not include services relating to total equipment replacement due to obsolescence or unavailability of parts.

REPAIR MATERIALS are the parts and materials necessary to restore Covered Equipment to working condition following an Equipment Failure, but excludes total equipment replacement due to obsolescence or unavailability of parts, unless excluded from the Agreement. At JCI’s option, Repair Materials may be new, used, or reconditioned.

SCHEDULED SERVICE MATERIALS are the materials required to perform Scheduled Service Visits on Covered Eq uipment, unless excluded from the Agreement.

SCHEDULED SERVICE VISITS are the on-site labor visits required to perform JCI recommended inspections and preventive maintenance on Covered Equipment.

SERVICES are the work, materials, labor, service visits, and repairs to be provided by JCI pursuant to this Agreement except that the Services do not include the Connected Equipment Services or the provision of other software products or digital or cloud services, which are provided under separate terms and conditions referenced in Section P.

A. JCI’S SERVICES FOR COVERED EQUIPMENT

1. BASIC COVERAGE means Scheduled Service Visits, plus Scheduled Service Materials (unless excluded from this Agreement). No parts, equipment, Repair Labor or Repair Materials are provided for under BASIC COVERAGE.

2. PREMIUM COVERAGE means BASIC COVERAGE plus Repair Labor, plus Repair Materials (unless excluded from the Agreement). If Customer has ordered PREMIUM COVERAGE, JCI will inspect the Covered Equipment within forty -five (45) days of the date of this Agreement, or as seasonal or operational conditions permit. JCI will then advise Customer if JCI finds any Covered Equipment not in working order or in need of repair. With Customer’s approval, JCI will perform the work necessary to put the Covered Equipment in proper working condition, subject to the terms of this Agreement. Customer will pay for such work at JCI’s standard rates for parts and labor in effect at the time that the work is performed. If Customer does not want JCI to perform the work identified as necessary by JCI, any equipment thereby affect ed will be removed from the list of Covered Equipment, and the Contract Price will be adjusted accordingly. Should Customer not make JCI’s recommended repairs or proceed with the modified PREMIUM COVERAGE, JCI reserves the right to invoice Customer for the cost of the initial equipment inspection.

3. EXTENDED SERVICE means Services performed outside JCI’s normal business hours and is available only if Customer has PREMIUM COVERAGE. Extended Service is available either 24/5 or 24/7, at Customer’s election. The price for Ex tended Service, if chosen by Customer, is part of the total Contract Price.

4. REMOTE MONITORING SERVICES OR REMOTE OPERATING SERVICES. If Remote Monitoring Services or Remote Operating Services are provided, Customer agrees to furnish JCI with a list o f the names, titles, addresses, email addresses, and phone numbers of all persons authorized to be contacted by, or be able to contact the ROC to perform specific agreed upon actions with the appropriate aut hority. If JCI’s Services include “Remote Monitor ing Services with Open and Close,” Customer also agrees to furnish JCI with Customer’s daily and holiday opening and closing schedules. Customer agrees to maintain and update the call lists with accurate information. Customer fur ther agrees to notify JCI of such changes as soon as possible. JCI/ROC is not responsible to find new contacts/numbers if the contacts on the call list s cannot be reached. A maximum of three contacts are allowed for any time of the day. If none of those contacts can be reached, the n neither JCI nor the ROC are responsible for damages. Customer is responsible for any and all costs and expenses arising from Customer’s failure to provide timely updates for any of the contact information submitted to the ROC.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 87 of 95

5. CUSTOMER SERVICE INFORMATION PORTAL. Customer may be able to utilize JCI’s Customer Service Information Portal during the term of the Agreement, pursuant to the then applicable Terms of Use Agreement.

B. OUT OF SCOPE SERVICES
If, during any Service Visit, JCI detects a defe ct in any of Customer’s equipment that is not Covered Equipment under this Agreement (an “Out of Scope Defect”), JCI may (but shall have no obligation to) notify Customer of such Out of Scope Defect. If Customer elects for JCI to repair such Out of Scope Defect, or if JCI otherwise performs any Services or provides any materials, parts, or equipment outside the scope of the Ser vices (collectively, “Out of Scope Services”), Customer shall direct JCI to perform such Out of Scope Services in writing, and Customer shall pay for such Out of Scope Services at JCI’s standard fees or hourly rates. If, after receiving notice of an Out of Scope Defect, Customer elects not to engage JCI to repair such Out of Scope Defect, Customer shall defend and indemnify JCI from and against any and all losses, damages, claims, costs and expenses arising directly or indirectly out of such Out of Scope Defect. Any Out of Scope Services performed by JCI at the direction of Customer pursuant to this Section shall be subject to the Customer Terms in effect as of the Effective Date (the “Customer Terms”), which Customer Terms are incorporated into this Agreement by this reference. A copy of the Customer Terms currently in effect is found at www.johnsoncontrols.com/customerterms
.

C. EXCLUSIONS
JCI’s Services and warranty obligations expressly exclude:
(a) the repair or replacement of ductwork, casings, cabinets, structural supports, tower fill/slats/basin, hydronic and pneumatic piping, and vessels, gaskets, and piping not normally replaced or maintained on a scheduled basis, and removal of oil from pneumatic piping; (b) disposal of hazardous wastes (except as otherwise expressly provided herein); (c) disinfecting of chiller condenser water systems and other components for biohazards, such as but not limited to, Legionella unless explicitly set forth in the scope of services between the parties. Unless explicitly provide for within the scope of services, this is Out of Scope Services and the Customer’s exclusive responsibility to make arrangements for such services with a provider other than JCI. Mentions of chiller tube cleaning, condenser cleaning, cooling tower cleaning or boiler tube cleaning in any scope of services, only involve work to remove normal buildup of debris and scale using tube brush cleaning, pressure washing or acid flushing. Reference to such cleaning does not include chemical cleaning, disinfection or chemical water treatment required to eliminate, control or disinfect against biohazards such as but not limited to Legionella;
(d) refrigerant; supplies, accessories, or any items normally consumed during the use of Covered Equipment, such as ribbons, bulbs and paper; (e) the furnishing of materials and supplies for painting or refinishing equipment; (f) the repair or replacement of wire in conduit, buried cable/transmission lines, or the like, if not normally replaced or maint ained on a scheduled basis;
(g) replacement of obsolete parts; and
(h) damages of any kind, including but not limited to personal injury, death, property damage, and the costs of repairs or servic e resulting from:
• abuse, misuse, alterations, adjustments, attachments, combinations, modif ications, or repairs to Covered Equipment not performed, provided, or approved in writing by JCI;
• equipment not covered by this Agreement or attachments made to Covered Equipment; • acts or omissions of the Customer, including but not limited to the failure of the Customer to fulfill the Customer Obligations and Commitments to JCI as described in Section F of this Agreement, operator error, Customer’s failure to conduct preventive maintenance, issues resulting from Customer’s previous denial of JCI access to the Covered Equipment, and Customer’s failure to keep the site clean and free of dust, sand, or other particles or debris, unless such conditions are previously expressly acknowledged by JCI in writing;

• use of the Covered Equipment in a manner or environment, or for any purpose, for which it was not designed by the manufacturer; • site-related and environmental conditions, including but not limited to power failures and fluctuations in electrical current (or “power surges”) and biohazards such as but not limi ted to Legionella associated with condenser water, cooling tower systems and subcomponent systems;
• the effects of erosion, corrosion, acid cleaning, or damage from unexpected or especially severe freezing weather; • issues or failures not specifically covered by this Agreement; or • occurrences beyond JCI’s reasonable control and without JCI’s fault or negligence.

D. PAYMENT TERMS; PRICE ADJUSTMENTS
Unless otherwise agreed by the parties in writing, fees for Services to be performed shall be paid annually in advance. Fees and other amounts due hereunder are due upon receipt of the invoice, which shall be paid by Customer via electronic delivery via EFT/ACH . Such payment is a condition precedent to JCI’s obligation to perform Services under the Agr eement. Any invoice disputes must be identified in writing by Customer within 21 days of the date of invoice. Payments of any disputed amounts are due and payable upon resolution. Customer acknowledges and agrees that timely payments of the full amounts listed on invoices is an essential term of this Agreement and that failure by Customer to make payment in full when due is a material breach of this Agreement. Customer further acknowledges that if there is any amount outstanding on an invoi ce, it is material to company and will give JCI, without prejudice to any other right or remedy, the right to, without notice: (i) suspend, discont inue or terminate performing any services and/or withhold further deliveries of equipment and other materials, terminate or su spend any unpaid software licenses, and/or suspend JCI’s obligations under or terminate this Agreement; and (ii) charge Customer interest on the amounts unpaid at a rate equal to the lesser of one and one half (1.5) percent per month or the maximum rate permitted under applicable law, until payment is made in full. JCI’s election to continue providing future services does not, in any way diminish JCI’s right to terminate or suspend services or exercise any or all rights or

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 88 of 95

remedies under this Agreement. JCI shall not be liable for any damages, claims, expenses, or liabilities arising from or relating to suspension of services for non-payment. In the event that there are exigent circumstances requiring services or the JCI otherwise performs services at the premises following suspension, those services shall be governed by the terms of this Agreement unless a separate contract is executed. If Customer disputes any late payment notice or JCI’s efforts to collect payment. Customer shall immediately notify JCI in writing and explain the basis of the dispute.

Customer will pay all of JCI’s reasonable collection costs (including legal fees and expenses). In the event of Customer’s de fault, the balance of any outstanding amounts will be immediately due and payable.

JCI may increase prices upon notice to the Customer to reflect increases in material and labor costs. All stated prices are exclusive of and Customer agrees to pay any taxes, fees, duties, tariffs, false alarm assessments, installation or alarm permits and levies or other similar charges imposed and/or enacted by a government, however designated or imposed, including but not limited to value -added and withholding taxes that are levied or based upon the amounts paid under this Agreement. If this Agreement is renewed, JCI will provide Customer with notice of any adjustments in the Contract Price applicable to any Renewal Term. Unless Customer terminates this Agreement in writing at least ninety (90) days prior to the end of the then-current Term, the adjusted Contract Price shall be the price for the Renewal Term. Prices for products covered by this Agreement may be adjusted by Company, upon notice to Customer at any time prior to shipment and regardless of Customer’s acceptance of the Company’s proposal or quotation, to reflect any increase in Company’s cost of raw materials (e.g., steel, aluminum) inability to secure Products, chang es or increases in law, labor, taxes, duties, tariffs or quotas, acts of government, any similar charges, or to cover any extra, unforeseen and unusual cost elements.

E. WARRANTIES
JCI warrants its Services will be provided in a good and workmanlike manner for 90 days from the date of Services. If JCI re ceives written notice of a breach of this warranty prior to the end of this warranty period, JCI will re -perform any non-conforming Services at no additional charge within a commercially reasonable time of the notification.

JCI warrants that equipment manufactured or labeled by Johnson Controls, Inc. shall be free from defects in material and workmanship arising from normal usage for a period of 90 days. No warranty is provided for third- party products and equipment installed or furnished by JCI. Such products and equipment are provided with the third party manufacturer’s w arranty to the extent available, and JCI will transfer the benefits, together with all limitations, of that manufacturer’s warranty to Customer. All transportation charges incurred in connection with the warr anty for equipment and/or materials not covered under this Agreement shall be borne by Customer. Except as provided herein, if JCI receives written notice of a breach of this warranty prior to the end of this warranty period, JCI will repair or replace (at JCI’s option) the defective equipment.

These warranties do not extend to any Services or equipment that have been misused, altered, or repaired by Customer or third parties without the supervision of and prior written approval of JCI, or if JCI serial numbers or warranty decals have been removed or altered. All replaced parts or equipment shall become JCI’s property. This warranty is not assignable. Warranty service will be provided during normal business hours, excluding holidays. The remedies set forth herein shall be Customer’s sole and exclusive remedy with regards to any warranty claim under this Agreement.

Any lawsuit based upon the warranty must be brought no later than one (1) year after the expiration of the applicable warrant y period. This limitation is in lieu of any other applicable statu te of limitations. CUSTOMER FURTHER ACKNOWLEDGES AND AGREES THAT THESE WARRANTIES ARE JCI’S SOLE WARRANTIES AND TO THE MAXIMUM EXTENT PERMITTED UNDER APPLICABLE LAW ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JCI makes no and specifically disclaims all representations or warranties that the services, products, software or third party product or software will be secure from cyber threats, hacking or other similar malicious activity, or will detect the presence of, or eliminate, prevent, treat, or mitigate the spread, transmission, or outbreak of any pathogen, disease, virus or other contagion, including but not limited to COVID 19.

F. CUSTOMER OBLIGATIONS AND COMMITMENTS TO JCI

1. Customer warrants it has given JCI all information concerning the condition of the Covered Equipment. The Customer agrees an d warrants that, during the Term of this Agreement, Customer will:
(1) operate the Covered Equipment according to the manufacturer’s and/or JCI’s recommendations; (2) keep accurate and current work logs and information about the Covered Equipment as recommended by the manufacturer and/o r JCI; (3) provide an adequate environment for Covered Equipment as recommended by the manufacturer and/or JCI, including, but not limited to adequate space, electrical power, water supply, air conditioning, and humidity control; (4) notify JCI immediately of any Covered Equipment malfunction, breakdown, or othe r condition affecting the operation of the Covered Equipment;
(5) provide JCI with safe access to its Premises and Covered Equipment at all reasonable and necessary times for the perform ance of the Services;
(6) allow JCI to start and stop, periodically turn off, or otherwise change or temporarily suspend equipment operations so that JCI can perform the Services required under this Agreement;
(7) as applicable, provide proper condenser, cooling tower and boiler water treatment for the proper functioning of Covered Equipment and protect against any environmental issues and instances of biohazards such as but not limited to Legionella; (8) carefully and properly set and test the intrusion alarm system each night or at such other time as Customer shall clos e the Premises; (9) obtain all necessary licenses and permits required for and pay all taxes associated with the Services; (10) notify JCI immediately of any claimed inadequacy in, or failure of, the Covered Equipment or other condition affecting the op eration of the Covered Equipment;
(11) furnish any necessary 110 volt A/C power and electrical outlets at its expense; (12) properly maintain, repair, service, and assure the proper operation of any other property, system, equipment, or device of Customer or others to which the Covered Equipment may be attached or connected, in accordance with manufacturer recommendations, insurance carrier requirements, or the requirements of any fire rating bureau, agency, or other authorities having jurisdiction thereof; (13) not tamper with, alter, adjust, disturb, injure, remove, or otherwise interfere with any Covered Equipment (including any related software) and not permit the same to be done;
(14) refrain from causing false alarms, and reimburse JCI for any fine , penalty, or fee paid by or assessed against JCI by any governmental or

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 89 of 95

municipal agency as a result thereof;
(15) be solely responsible for the establishment, operation, maintenance, access, security and other aspects of its computer network (“Network”) and shall supply JCI secure Network access for providing its services. Products networked, connected to the internet, or otherwise connected to computers or other devices must be appropriately protected by Customer and/or end user against unauthorized ac cess; and (16) take appropriate measures, including performing back -ups, to protect information, including without limit data, software, or files (collectively “Data”) prior to receiving the service or products.

2. Customer acknowledges and understands that unless water treatment for biohazards (such as Legionella) is explicitly included in the services JCI is providing, it is Customer's responsibility to provide such treatment. Customer also acknowledges that its failure to m eet the above obligations will relieve JCI of any responsibility for any Covered Equipment breakdown, or any necessary repair or replacement of any Covered Equipment. If Customer breaches any of these obligations, JCI shall have the right, upon written notice to Customer, to susp end its Services until Customer cures such breach. In addition, Customer shall be responsible for paying or reimbursing JCI for any costs ass ociated with corrective work required as a result of Customer’s breach of these obligations.

G. INSURANCE
Customer is responsible for obtaining all insurance coverage that Customer believes is necessary to protect Customer, Custome r’s property, and persons in or on the Premises, including coverage for personal injury and property damage. THE PAYMENTS CUSTOMER MAKES UNDER THIS AGREEMENT ARE NOT RELATED TO THE VALUE OF THE PREMISES, CUSTOMER’S PROPERTY OR POSSESSIONS, OR THE PERSONS OCCUPYING OR AT

ANY TIME PRESENT IN OR ON THE PREMISES, BUT RATHER ARE BASED ON THE COST OF THE SYSTEM AND THE SERVICES, A ND TAKE INTO CONSIDERATION THE PROTECTION AFFORDED TO JCI UNDER THIS AGREEMENT. Customer hereby releases JCI from any liability for any ev ent or condition customarily covered by commercial liability insurance. Customer understands that neither the Services nor the Covered Equipment are designed to reduce, but not eliminate, certain risks. JCI does not guaranty that neither the Services nor Covered Equipment will prevent personal injury, unauthorized entrances or fire and smoke damage to the Premises. Custom er further agrees that Customer has read and understands the terms and conditions of this Agreement.

H. INDEMNITY
JCI and Customer shall each indemnify the other party and its officers, agents, directors, and employees, from any and all da mages, losses, costs and expenses (including reasonable attorneys’ fees) arising out of third party claims, demands, or suits for bodily injury (including death) or damage to tangible property to the extent arising out of the negligence or intentional misconduct of the indemnifying party or its employees or agents.

Customer expressly agrees that JCI shall be responsible for injury, damage, or loss only to the extent caused directly by JCI’s negligence or intentional misconduct. The obligations of JCI and Customer under this section are further subject to sections I and K below.

I. LIMITATION OF LIABILITY

TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL JCI AND ITS AFFILIATES AND THEIR RESPECTIVE PERSONNEL, SUPPLIERS AND VENDORS (“JCI PARTIES”) BE LIABLE TO YOU OR ANY THIRD PARTY UNDER ANY CAUSE OF ACTION OR THEORY OF LIABILITY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, FOR ANY: (1) SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR INDIRECT DAMAGES; (2) LOST PROFITS, REVENUES, DATA, CUSTOMER OPPORTUNITIES, BUSINESS, ANTICIPATED SAVINGS, OR GOODWILL; (3) BUSINESS INTERRUPTION; OR (4)

DATA LOSS OR OTHER LOSSES ARISING FROM VIRUSES, RANSOMWARE, CYBER ATTACKS OR FAILURES OR INTERRUPTIONS TO NETWORK SYSTEMS. IN ANY CASE, THE ENTIRE AGGREGATE LIABILITY OF THE JCI PARTIES UNDER THIS AGREEMENT FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE SHALL BE LIMITED TO $250,000. CUSTOMER UNDERSTANDS THAT JCI IS NOT AN INSURER REGARDING THE WORK OR THE SERVICES. JCI SHALL NOT BE RESPONSIBLE FOR ANY DAMAGE OR

LOSS THAT MAY RESULT FROM FIRE SAFETY OR SECURITY EQUIPMENT THAT FAILS TO PERFORM PROPERLY OR FAILS TO PREVENT A CASUALTY OR LOSS.

J. FORCE MAJEURE
JCI shall not be liable, nor in breach or default of it s obligations under this Agreement, for delays, interruption, failure to render services, or any other failure by JCI to perform an obligation under this Agreement, where such delay, interruption or failure is caused, in w hole or in part, directly or indirectly, by a Force Majeure Event. A “Force Majeure Event” is a condition or event that is beyond the reasonable control of JC I, whether foreseeable or unforeseeable, including, without limitation, acts of God, severe weather (including but not limited to h urricanes, tornados, severe snowstorms or severe rainstorms), wildfires, floods, earthquakes, seismic disturbances, or other natural disasters, acts or omissions of any governmental authority (including change of any applicable law or regulation), epidemics, pandemics, disease, viruses, quarantines, or other public health risks and/or responses thereto, condemnation, strikes, lock-outs, labor disputes, an increase of 5% or more in tariffs or other excise taxes for materials to be used on the project, fires, explosions or other casualties, thefts, vandalism, civil disturbances, insurrection, mob violence, riots, war or other armed conflict (or the serious threat of same), acts of terrorism, electrical power outages, interruptions or degrad ations in telecommunications, computer, network, or electronic communications systems, data breach, cyber-attacks, ransomware, unavailability or shortage of parts, materials, supplies, or transportation, or any other cause or casualty beyond the reasonable control of JCI. If JCI’s performance of the work is delayed, impacted, or prevented by a Force Majeure Event or its continued effects, JCI shall be excused from performance under the Agreement.

Without limiting the generality of the foregoing, if JCI is delayed in achieving one or more of the scheduled milestones set forth in the Agreement due to a Force Majeure Event, JCI will be entitled to extend the relevant completion date by the amount of time that JCI was delayed as a result of the Force Majeure Event, plus such additional time as may be reasonably necessary to overcome the effect of the delay. To the extent that the Force Majeure Event directly or indirectly increases JCI’s cost to perform the services, Customer is obligated to reimburse JCI for such increased costs, including, without limitation, costs incurred by JCI for additional labor, inventory storage, expedited shipping fees, trailer and equipment rental fees, subcontractor fees or other costs and expenses incurred by JCI in connection with the Force Majeure Event.

K. RESOLUTION OF DISPUTES
If a dispute arises under this Agreement, the parties shall promptly attempt in good faith to resolve such dispute by negotia tion. In the event the dispute is unable to be resolved, either party shall have the right to ini tiate arbitration by filing with the American Arbitration Association provided no other legal action has been previously filed. Upon filing of the arbitration, the AAA shall have the exclusive jurisdicti on over the Dispute. Thus, either party may decide to file an action in a court of competent jurisdiction. If that court filing is the first legal proceeding filed, that court shall have jurisdiction over the Dispute to the exclusion of any arbitration. Arbitration shall be conducted in accordance with the then current arbitration

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 90 of 95

rules of the American Arbitration Association or other arbitration service mutually agreed to by the parties. Arbitration mu st be completed within sixty (60) days after the Dispute is submitted to arbitration unless the parties mutually agree otherwise. The award rendered by the arbitrator shall be final, and judgment issued by the Arbitrator may be entered in accordance with applicable law in any court having competent jurisdiction. The party prevailing in the arbitration or c ourt proceeding shall be entitled to an award of its reasonable costs, including reasonable attorneys’ fees, incurred as a result of the Dispute. CUSTOMER MUST BRING ANY CLAIM AGAINST JCI WITHIN ONE (1) YEAR AFTER THE CLAIM AROSE. IF CUSTOMER

DOES NOT, CUSTOMER WILL HAVE IRREVOCABLY WAIVED ITS RIGHT TO SUE JCI AND/OR INSTITUTE OTHER PROCEEDINGS, AND JCI SHALL HAVE NO LIABILITY TO CUSTOMER FOR SUCH CLAIM. TIME IS OF THE ESSENCE RELATIVE TO CUSTOMER PURSUING ANY SUCH CLAIM. THE PROVISIONS OF THIS AGREEMENT WHICH APPLY TO ANY CLAIM SHALL REMAIN IN EFFECT EVEN AFTER THE AGREEMENT IS TERMINATED. JCI AND CUSTOMER EACH WAIVE THEIR RIGHT TO A JURY TRIAL.

L. TERM AND TERMINATION

1. The Original Term is as set forth herein. At the conclusion of the Original Term, this Agreement shall automatically renew and extend for successive terms equal to the Original Term unless the Customer or JCI gives the other written notice it does not want to ren ew prior to the end of the then-current term (each a “Renewal Term”). The notice must be delivered at least ninety (90) days prior to the end of the Original Term or any Renewal Term. The Original Term and any Renewal Term may be referred to herein as the “Term.” Customer agrees to issue and send a Purchase Order t o JCI at least thirty (30) days prior to expiration of the Original Term or any Renewal Term if necessary for payments to be processed, but failure to do so is not a pre-condition to Renewal Term payments being due to JCI

2. Remote Monitoring Services and Remote Operating Services may be immediately canceled by either party if JCI’s Remote Operations Center, connecting wires, or monitoring systems are destroyed by fire or other catastrophe, or where the Premises are so subs tantially damaged that it is impractical to continue Services.

3. If either party fails to perform any of its material obligations under this Agreement, the other party shall provide written notice thereof to the party alleged to be in default. Should the party alleged to be in default fail to respond in writing or take action to cure the alleged default within ten (10) days of receiving such written notice, the notifying party may terminate this Agreement by providing written notice of such termination.

4. JCI may terminate this Agreement and discontinue any Services if JCI is unable to obtain or continue to support technologies, equipment or component parts that are discontinued, become obsolete or are otherwise not commercially available, or for convenience upon forty -five (45) days written notice. JCI will not be liable for any damages or subject to any penalty as a result of any such terminatio n.

5. Upon termination of this Agreement for any reason, Customer shall pay to JCI all undisputed amounts owed through the date of termination within thirty (30) days of such termination. If Customer terminates this Agreement, other than in accordance with this Section L, Customer shall also pay Johnson Controls 35% of the charges for Services remaining to be paid for the unexpired T erm of this Agreement as liquidated damages and not as a penalty. Customer shall provide JCI with reasonable access to the Premises to remove the Gate way Device and any other JCI property and to un- program any controls, intrusion, fire, or life safety syst em, as applicable. Customer shall be liable for all fees, costs, and expenses that JCI may incur in connection with the enforcement of this Agreement, including without limitati on, reasonable attorney fees, collection agency fees, and court costs.

M. ASBESTOS, MOLD, BIOAHAZARDS, AND HAZARDOUS MATERIALS “Hazardous Materials” means any material or substance that, whether by its nature or use, is now or hereafter defined or regulated as a hazardous waste, hazardous substance, pollutant, or contaminant under any local, state, or federal law, regulation, or ordinance relating to or addressing public and employee health and safety and protection of the environment, or which is toxic, explosive, corrosive, flammable, radioactive, carcinogenic or otherwise hazardo us or which is or contains petroleum, gasoline, diesel, fuel, another petroleum hydrocarbon product or polychlorinated biphenyls. “Hazardous Materials” specifically includes mold, lead-based paints, biohazards such as but not limited to Legionella and asbestos-containing materials (“ACM”). Neither Customer nor JCI desires to or is licensed to undertake direct obligations relating to the identification, abatement, cleanup, control, removal or disposal of ACM.

JCI will be responsible for removing or disp osing of any Hazardous Materials that it uses in providing the Services (“JCI Hazardous Materials”) and for the remediation of any areas affected by the release of JCI Hazardous Materials. For other Hazardous Materials that may be present at its facilities (“Non-JCI Hazardous Materials”), Customer shall supply JCI with any information in its possession relating to the presence of Hazar dous Materials if their presence may affect JCI’s performance of the Services. If either Customer or JCI becomes aware of or suspects the presence of Non-JCI Hazardous Materials that may interfere with JCI’s Services, it shall immediately stop the Services in the affected area a nd notify the other party. As between Customer and JCI, Customer shall be responsible at its sole expense for removing and disposing of Non -JCI Hazardous Materials from its facilities and for the remediation of any areas impacted by the release of the Non-JCI Hazardous Materials and must provide a certificate of abatement before JCI will be obligated to perform or continue its Services, unless JCI had actual knowledge that Non-JCI Hazardous Materials were present and acted in disregard of that knowledge, in which case (i) JCI shall be responsible at its sole expense for the reme diation of any areas impacted by its release of such Hazardous Materials, and (ii) Customer shall remain responsible at its sole expense for the removal of Hazardous Materials that have not been released and for releases not resulting from JCI’s performance of the Services. Customer shall defend and indemnify JCI against any losses, costs, damages, expenses, and claims arising out of its failure to comply with this Section M.

N. CUSTOMER DATA
Customer data obtained from the Services is owned by and shall belong to Customer. JCI will access and use Customer data to provide Services to Customer. Except as set forth herein, JCI will not disclose to any third party any individual Customer data acquired through performance of the Services without Customer’s consent. Customer agrees that JCI and its subsidiaries, affiliates and approved third party contractors and developers may collect and use Customer data for any reason, as long as any external use of the data is on a de-identified basis that does not personally identify Customer or any individual. Customer hereby grants JCI a perpetual, worldwide, irrevocable, royalty free license to use, modify, mani pulate, sublicense, and create derivative works from such data. JCI shall retain all rights to any intellectual property, data, m aterials and products created as a result of its performance of Services.

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 91 of 95

O. JCI’S INTELLECTUAL PROPERTY
JCI shall retain all right, title and interest in any (a) work provided to Customer, including without limitation, all softwa re source and object code, documentation, technical information or data, specifications and designs and any changes, improvements or modifications thereto (“Deliverables”), and (b) Know-How (defined below) employed by JCI in the creation of the Deliverables or performance of the Services, whether known to JCI prior to, or developed or discovered or acquired in connection with, the performance of its obligations under this agreement. Owne rship of all Deliverables and Know-How shall vest solely in JCI and no Deliverables shall be deemed “works made for hire.” Without limiting the generality of the foregoing, ownership of all source files used in the course of performing the Services shall remain the exclusive property of JCI. For purposes of this Agreement, “Know- How” means any know -how, processes, techniques, concepts, methodologies, tools, analytical approaches, database models and designs, discoveries, and ideas furnished, produced by, developed, or used by JCI in the creation or provision of the Deliverables or in the performance of the Services, and any changes, improvements, or modifications thereto or derivatives thereof.

P. DIGITAL ENABLED SERVICES
If JCI provides Digital Enabled Services under this Agreement, these Digital Enabled Services require the install ation and deployment of site assessment tools and the collection, transfer and ingestion of building, equipment, system time series, and other data to JCI’s cloud-hosted software applications. Customer consents to the installation and deployment of site assessment tools and the collection, transfer and ingestion and use of such data by JCI to enable JCI to provide, maintain, protect and improve the Digital Enabled Services and JCI’s products and services. Customer acknowledges that, while Digital Enabled Services generally improve equipment performance and services, Digital Enabled Services do not prevent all potential malfunction, insure against all loss, or guarantee a certain level of performance and that JCI shall not be liable for any injury, loss or damage caused by any act of omission of JCI related to or arising from the monitoring of the equipment under the Digital Enabled Services.

Certain equipment sold hereunder includes by default JCI’s Connected Equipment Services. Digital Enabled Services may be on by default and the remote connection will continue to connect to Customer’s Equipment through the full equipment lifecycle, unless Customer specifically requests in writing that JCI disable the remote connection or JCI discontinues or removes such remote connection. If Customer’s equipment includes Digital Enabled Services, JCI will provide a cellular modem or other gateway device (“Gateway Device”) owned by JCI or Customer will supply a network connection suitable to establish a remote connection with Customer’s applicable equipment to permit JCI to perform Digital Enabled Services. For certain subscriptions, Customer will be able to access equipment information from a mobile or smart device using Digital Enabled Service’s mobile or web application. Any Gateway Devices provided hereunder shall remain JCI’s property, and JCI may upon reasonable notice access and remove such Gateway Device and discontinue services in accordance with the Software Terms. If Customer does not permit JCI to connect via a connection validated by JCI for the equipment or the connection is disconnected by Customer, and a service representative must therefore be dispatched to the Customer site, then the Customer shall pay JCI at JCI’s then-current standard applicable contract regular time and/or overtime rate for services performed by the service representative.

Q. JCI DIGITAL SOLUTIONS
JCI Digital Solutions. Use, implementation, and deployment of the software and hosted software products (“Software”) offered under these terms shall be subject to, and governed by, JCI’s standard terms for such Software and Software related professional services in effect from time to time at https://www.johnsoncontrols.com/techterms (collectively, the “Software Terms”). Applicable Software Terms are incorporated herein by this reference. Other than the right to use the Software as set forth in the Software Terms, JCI and its licensors reserve all right, title, and interest (including all intellectual property rights) in and to the Software a nd improvements to the Software. The Software that is licensed hereunder is licensed subject to the Software Terms and not sold. If there is a conflict between the other terms herein and the Software Terms, the Software Terms shall take precedence and govern with respect to rights and responsibilities relating to the Software, its implementation and deployment and any improvements thereto. Notwithstanding any other provisions of this Agreement, unless otherwise set forth in the applicable order, quote, proposal or purchase documentation, the following terms apply to Software that is provided to Customer on a subscription basis (i.e., a time limited license or use right), (each a “Software Subscription”):

Each Software Subscription provided hereunder will commence on the date the initial credentials for the Software are made available (the “Subscription Start Date”) and will continue in effect until the expiration of the subscription term noted in the applicable order, quote, proposal or purchase documentat ion. At the expiration of the Software Subscription, such Software Subscription will automatically renew for consecutive one (1) year terms (each a “Renewal Subscription Term”), unless either party provides the other party with a notice of non-renewal at least ninety (90) days prior to the expiration of the then- current term. To the extent permitted by applicable law, Software Subscriptions purchases are non-cancelable and the sums paid nonrefundable. Fees for Software Subscriptions shall be paid annually in advance, invoiced on the Subscription Start Date and each subsequent anniversary thereof. Customer shall pay all invoiced amounts within thirty calendar days after the date of invoice. Payments not made within such time period shall be subject to lat e charges as set forth in the Software Terms.

Unless otherwise agreed by the parties in writing, the subscription fee for each Renewal Subscription Term will be priced at Johnson Controls’ then-applicable list price for that Software offering. Any use of Software that exceeds the scope, metrics or volume set forth in this Agreement and applicable SOW will be subject to additional fees based on the date such excess use began.

R. Privacy.

1. JCI as Processor : Where JCI factually acts as Processor of Personal Data on behalf of Customer (as such terms are defined in the DPA) the terms at www.johnsoncontrols.com/dpa
(“DPA”) shall apply.

2. JCI as Controller: JCI will collect, process and transfer certain personal data of Customer and its personnel related to the business relationship between it and Customer (for example names, email addresses, telephone numbers) as controller and in accordance with JCI’s Privacy Notice at https://www.johnsoncontrols.com/privacy. Customer acknowledges JCI’s Privacy Notice and strictly to the extent consent is mandatorily required under applicable law, Customer consents to such collection, processing and transfer. To the extent consent to such collection, proc essing and transfer by JCI is mandatorily required from Customer’s personnel under applicable law, Customer warrants and represents that it has obtained such consent

S. MISCELLANEOUS PROVISIONS

1. All notices required to be given hereunder shall be in writing and shall be considered properly given if: (a) delivered in person, (b) sent via

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 92 of 95

the United States Postal Service, postage prepaid, registered or certified with return receipt requested, (c) sent by overnight delivery service (e.g., FedEx, UPS), or (d) sent by facsimile, email or other electronic means and confirmed by facsimile, return email or tel ephone.

2. This Agreement may not be assigned by Customer without JCI’s prior written consent. JCI shall have the right to assign this Agreement to any other person, firm, or corporation without Customer’s consent. JCI shall also have the right, in its sole discretion, to subcontract any portion of the Services. This Agreement inures to the benefit of and is applicable to any assignees or subcontractors of JCI, and is bi nding upon Customer with respect to said assignees or subcontractors with the same force and effect as it binds Customer to JCI.

3. This Agreement shall be subject to and governed by the laws of the State where the Services are performed.

4. If any provision of this Agreement is found to be invalid, illegal or unenforceable in any respect, the validity, legality and enforceability of the remaining provisions contained herein shall not in any way be affected or impaired thereby.

5. This Agreement is the entire contract between JCI and Customer and supersedes any prior oral understandings, written agreements, proposals, or other communications between the parties.

6. Customer acknowledges and agrees that any purchase order issued by Customer in connection with this Agreement is intended only to establish payment authority for Customer’s internal accounting purposes and shall not be considered to be a counteroffer, ame ndment, modification, or other revision to the terms of this Agreement. No term or condition included or referenced in Customer’s purchase order will have any force or effect and these terms and conditions shall control. Customer’s acceptance of any Services shall constitute an acceptance of these terms and conditions. Any proposal for additional or different terms, whether in Customer’s purchase order or any other document, unless expressly accepted in writing by JCI, is hereby objected to and rejected.

7. JCI expressly disclaims any requirement, understanding or agreement, express or implied, included directly or incorporated by reference, in any Customer purchase order, solicitation, notice or otherwise, that any of JCI’s personnel be vaccinated against Covid -19 under any federal, state/provincial or local law, regulation or order applicable to government contracts or subcontracts, including, without limitation, Presidential Executive Order 14042 (“Ensuring Adequate COVID Safety Protocols for Federal Contractors”) and Federal Acquisition Regulation (FAR) 52.223- 99 (“Ensuring Adequate COVID Safety Protocols for Federal Contractors”). Any such requirement shall only apply to JCI’s personnel if and only to the extent contained in a written agreement physically signed by an authorized officer of JCI.

8. If there are any changes to C ustomer’s facilities or operations, or to applicable regulations, laws, codes, taxes, or utility charges, that materially affect JCI’s performance of the Services or its pricing thereof, JCI shall have the right to an equitable and appr opriate adjustment to the scope, pricing, and other affected terms of this Agreement.

9. No claim or cause of action, whether known or unknown, shall be brought against JCI more than one year after the claim first arose. Except as provided for herein, JCI’s claims must also be brought within one year. Claims for unpaid contract amounts are not subject to the one -year limitation.

ADDENDUM TO PSA TERMS AND CONDITIONS FOR

MONITORING OF INTRUSION, FIRE AND OTHER SAFETY SYSTEMS

If Remote Monitoring Services explicitly includes remote fire alarm monitoring, security alarm monitoring or video monitoring in the scope of work or customer charges, the Agreement is hereby modified and amended to include the terms and provisions of this Addendum to the PSA for Monitoring of Intrusion, Fire and Safety Systems (the “Addendum”). Capitalized terms that are not defined herein, shall have the meaning given to them in the Agreement. In the event of a conflict between the terms and conditions of this Addendum and those appearing in the Agreement, the terms and conditions of this Addendum shall prevail.

1. Remote Monitoring of Alarm Signals. If JCI receives an emergency alarm signal at JCI’s ROC, JCI shall endeavor to notify the appropriate police or fire department, or other emergen cy response agency having jurisdiction and JCI shall endeavor to notify Customer or its designated representative by email unless instructed to do otherwise by Customer in writing and/or based on standard operating procedures for the ROC. JCI, upon receipt of a non -emergency signal from the Premises, shall endeavor to notify Customer’s representative pursuant to Customer’s written instructions, defaulting to email or text notification. Customer acknowledges that if the signals transmitted from the Premises will be monitored in a monitoring facility not operated by JCI, the personnel in such monitoring facilities are not the agents of JCI, nor does JCI assume any responsibility for the manner in which such signals are monitored or the response to such signal.

2. Remote Monitoring Services Pricing. Remote Monitoring Services shall be provided by JCI if the Agreement includes a charge for such Service.

If such Service is purchased, JCI will monitor the number of alarms for the Premises and the initial charg e is based on the pricing agreed to by the parties, subject to the terms and conditions of this Addendum. If the number of alarms produced at the Premises goes beyond t he contracted number of alarms in a month, Customer will be billed an overage fee.

3. Communications Media. Customer acknowledges that monitoring of Covered Equipment requires transmission of signals over standard telephone lines and/or the Internet and that these modes of transmission may be interrupted, circumvented, or compromised, in which case no signal can be transmitted from the Premises to the monitoring facility. Customer understands that to allow the monitoring fa cility to be aware of such a condition, additional or alternative protection can be installed, such as line security devices, at Customer’s cost and expense and for transmission via telephone line only. Customer acknowledges it is aware that line security devices are available and, unless expressly identified in Schedule A - Equipment List, has declined to purchase such devices. Customer further acknowledges that such additional protection is not available for Internet transmission under this Agreement.

4. False/Unnecessary Alarms; Service Calls. At JCI’s option, an additional fee may be charged for any false alarm or unnecessary Service Visit

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 93 of 95

caused or necessitated by Customer. In addition, Customer shall be fully responsible and liable for fines, penalties, assess ments, taxes, fees or charges imposed by a governmental body, telephone, communication, or signal transmission company as the result of any false alarm and shall reimburse JCI for any costs incurred by JCI in connection therewith. Customer shall operate the system carefully so as to avoid causing false alarms.

False alarms can be caused by severe weather or other forces beyond the control of JCI. If an undue number of false alarms are received by JCI, in addition to any other available remedies available to JCI, JCI may terminate this Agreement and discontinue any Service(s) an d seek to recover damages. If an agent is dispatched, by a governmental authority or otherwise, to respond to a false alarm, where the Customer , or any other party has intentionally, accidentally or negligently activated the alarm signal, Customer shall be responsible for and pay any and all fees and/or fines assessed with respect to the false alarms and pay to JCI the additional charges and costs incurred by it from a false alarm. If the Customer's system has a local audible device, Customer authorizes JCI to enter the Pre mises to turn off the audible device if JCI is requested or ordered to do so by governmental authorities, neighbors or anyone else and Customer will pay JCI its standard service call charge for each such visit. Police agencies require repair of systems which cause false dispatches. Customer shall maintain the equipment necessary for JCI to supply the Services and Customer shall pay all costs for such maintenance. At least monthly, Customer will test the system's protective devices and send test signals to the ROC for all monitoring equipment in accordance with instructions from JCI or the ROC. Customer agrees to test the monitoring systems, inc luding testing any ultrasonic, microwave, infrared, capacitance or other electronic equipment prior to the end of each month and will immediately report to JCI if the equipment fails to respond to the test. Customer shall make any necessary repairs as soon after receipt of notice as is reasonably practical. Customer shall at all times be solely responsible for maintaining any sprinkler system in good working order and provide adequate heat to the Premises.

5. Remote Monitoring of Video Monitoring Services. During the Term, JCI's sole and only obligation arising from the inclusion of Video Monitoring Services in any Service offering shall be to monitor the digital signals actually received by JCI at its ROC from means of the Video System an d upon receipt of a digital signal indicating that an alarm condition exists, to endeavor, as permitted by law, to notify the police or other municipal authority deemed appropriate in JCI’s absolute discretion and to such persons Customer has designated in writing to JCI to receive noti fication of such alarm condition as set forth herein. . No alarm installation, repair, maintenance or guard responses will be provided under this Video Monitoring Services option. JCI may, without prior notice to Customer, in response to applicable law or insurance requirements, revise, replace, discontinue and/or rescind its response policies and procedures.

a. Inception and conclusion of service. Video Monitoring shall be provided by JCI if this Agreement includes a charge for Video Monitoring Services. If such Video Monitoring Service is purchased, Video Monitoring Services will begin when the Vide o System is installed and operational, and when the necessary communications connection is completed. No obligation for the provision of this Video Mon itoring Service will commence until these requirements are met.

b. Customer Equipment. Customer shall o btain, at its own cost and expense: (a) the equipment necessary to connect to JCI’s ROC; and (b) whatever permission, permits or licenses that may be necessary from all persons, governmental authorities, utility, and a ny other related service providers in connection with the Services. The video system to be used by the Customer is intended to produce and transmit video images (the “Video System Images”) of the Premises to the ROC (the “Video System”). JCI makes no promise, warr anty or representation that the video system will operate as intended. Customer further agrees that, notwithstanding any role or participation by JCI in Video System and Video System Images, JCI shall have no responsibility or obligation with regard to Customer, the Vide o System or any other Customer equipment.

c. System Location. The Video System related cameras shall be located and positioned by Customer along with attendant burglary digital alarm signal(s). Customer shall ensure that the Video System related cameras will be positioned and located such that it will only produce or capture Video System Images of areas of the Premises. Customer will provide adequate illumination under all operating conditions for the proper viewing of the cameras. Customer acknowledges and agrees that JCI has exercised no control over, or participa ted in locating or positioning the Video System related camera including, but not limited to selecting what areas, locations, things or persons that the Video System Images may depict or capture.

d. Images. Customer shall be solely responsible for the Vi deo System Images produced or captured by the Video System and Customer shall defend, indemnify and hold harmless JCI and its officers, agents, directors, and employees, from any and all damages, l osses, costs and expenses (including reasonable attorneys ’ fees) arising out of third party claims, demands, or suits in connection with the use, operation, location and position of the Video System, and the Video System Images resulting there from, including, but not limited to, any claims of any person depicted in a Video System image, including but not limited to, any claim by such person that his or her privacy has been invaded or intruded upon or his or her likeness has been misappropriated. Any duty to obtain the consent or permission o f any person depicted in a Video System Image to have his or her likeness to be depicted, received, transmitted or otherwise used, and the duty to determine and comply with any and all applicable laws, regulations, standards and other obligations that govern the legal, proper and ethical use of video capturing devices, such as the Video System, including, but not limited to, notification that the Video System is in use at the Premises, shall be the sole responsibility of the Customer. JCI agrees to make Video System Images available to Customer and upon their respective request. JCI makes no promise, warranty or representation as to the length of time that it retains Video Im ages, or the quality thereof.

e. Video System Signals. When a signal from the Video System is received, JCI reserves the right to verify all alarm signals before notifying emergency personnel, and may choose not to notify emergency personnel if it has reason to believe, in its sole discretion, th at an emergency condition does not exist. JCI will first attempt to verify the nature of the emergency by using visual verification and/or the two- way voice system (if applicable) of the Video System included in Customer's system. If JCI determines that an emergency condition exists, JCI will endeavor to notify th e proper police or emergency contact on a notification call list provided in writing by Customer to JCI, or its designee. When a non -emergency signal is received, JCI will attempt to contact the first available Customer representative on the notification call list but will not notify emergency authorities, this notification will be in the form of email or text and follow ROC processes.

If the customer requires phone calls to the call list for any emergency or non -emergency situation, the customer will need to make this request in writing. Customer authorizes and directs JCI, as its agent, to use its full discretion in causing the arrest or de tention of any person or persons on or around the premises who are not authorized by Customer. JCI WILL NOT ARREST OR DETAIN ANY PERSON .

f. Recordings. Customer consents to the tape recording of all telephonic communications between the Premises and JCI. JCI will have

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 94 of 95

no liability arising from recording (or failure to record) or publication of any two- way voice comm unications, other video recordings or their quality. JCI shall have no liability in connection with Video System or the Video System Images, including, but not lim ited to, any failure, omission, negligence or other act by JCI, or any of its officers, employees, representatives, agents, contractors, or any other third party in connection with the receipt (or failure of receipt), transmission, reading, interpreting, or response to any Video I mage.

6. Risk of Loss is Customer’s. JCI does not represent or warrant that the Services will prevent any loss by burglary, holdup, fire or otherwise, or that the Services will in all cases provide the protection for which it is installed or intended, or that the Services will b e uninterrupted or error-free.

Customer assumes all risk of loss or damage to the Premises being monitored and to its contents, whether belonging to Customer or other s; and has not relied on any representations and warranties of JCI, express or implied, except as specifically set forth in this Agreement. Further, expressly excluded from this Agreement are the warranties of merchantability or fitness or suitability for a particular purpose.

7. JCI’S RECEIPT OF ALARM SIGNALS, ELECTRONIC DATA, VOICE DATA OR IMAGES (COLLECTIVELY, “ALARM SIGNALS”) FROM THE EQUIPMENT OR SYSTEM INSTALLED IN THE PREMISES IS DEPENDENT UPON PROPER TRANSMISSION OF SUCH ALARM SIGNALS. JCI’S ROC CANNOT RECEIVE ALARM SIGNALS WHEN THE CUSTOMER’S TELCO SERVICE OR OTHER TRANSMISSION MODE IS NOT OPERATING OR HAS BEEN C UT, INTERFERED

WITH, OR IS OTHERWISE DAMAGED, OR IF THE ALARM SYSTEM IS UNABLE TO ACQUIRE, TRANSMIT OR MAINTAIN AN ALARM SIGNAL OVER CUSTOMER’S TELCO SERVICE OR TRANSMISSION MODE FOR ANY REASON INCLUDING BUT NOT LIMITED TO NETWORK OUTAGE OR OTHER NETWORK P ROBLEMS SUCH AS CONGESTION OR DOWNTIME, ROUTING PROBLEMS, OR INSTABILITY OF SIGNAL QUALITY. CUSTOMER

UNDERSTANDS THAT SIGNAL TRANSMISSION FAILURE MAY OCCUR OVER CERTAIN TYPES OF TELCO SERVICES SUCH AS SOME TYPES OF DSL,

ADSL, VOIP, DIGITAL PHONE, INTERNET PROTOCOL BASED PHONE OR OTHER INTERNET INTERFACE-TYPE SERVICE OR RADIO SERVICE, INCLUDING

CELLULAR, WIRELESS OR PRIVATE RADIO, OR CUSTOMER'S PROPRIETARY TELCOMMUNICATION NETWORK, INTRANET OR IP -PBX, OR OTHER

THIRD-PARTY EQUIPMENT OR VOICE/DATA TRANSMISSION NETWORKS OR SYSTEMS OWNED, MAINTAINED OR SERVICED BY CUSTOMER OR THIRD PARTIES, IF: (1) THERE IS A LOSS OF NORMAL ELECTRIC POWER TO THE MONITORED PREMISES OCCURS (THE BATTERY BACK-UP FOR JCI’S ALARM PANEL DOES NOT POWER CUSTOMER’S COMMUNICATION FACILITIES OR TELCO SERVICE); OR (2) ELECTRONIC COMPONENTS SUCH AS MODEMS MALFUNCTION OR FAIL. CUSTOMER UNDERSTANDS THAT JCI WILL ONLY REVIEW THE INITIAL COMPATIBILITY OF THE ALARM SYSTEM WITH CUSTOMER’S TELCO SERVICE AT THE TIME OF INITIAL INSTALLATION OF THE ALARM SYSTEM AND THAT CHANGES IN THE TELCO SERVICE’S DATA FORMAT AFTER JCI’S INITIAL REVIEW OF COMPATIBILITY COULD MAKE THE TELCO SERVICE UNABLE TO TRANSMIT ALARM SIGNALS TO JCI’S ROC. IF JCI DETERMINES IN ITS SOLE DISCRETION THAT CUSTOMER’S TELCO SERVICE IS CO MPATIBLE, JCI WILL PERMIT CUSTOMER TO USE

ITS TELCO SERVICE AS THE PRIMARY METHOD OF TRANSMITTING ALARM SIGNALS, ALTHOUGH CUSTOMER UNDERSTANDS THAT JCI RECOMMENDS THAT CUSTOMER ALSO USE AN ADDITIONAL BACK -UP METHOD OF COMMUNICATION TO CONNECT CUSTOMER’S AL ARM SYSTEM TO JCI’S ROC REGARDLESS OF THE TYPE OF TELCO SERVICE USED. CUSTOMER ALSO UNDERSTANDS THAT IF JCI DETERMINES IN ITS SOLE DISCRETION THAT CUSTOMER’S TELCO SERVICE IS, OR LATER BECOMES, NON -COMPATIBLE, OR IF CUSTOMER CHANGES TO ANOTHER TELCO

SERVICE THAT IS NOT COMPATIBLE, THEN JCI WILL REQUIRE THAT CUSTOMER USE AN ALTERNATE METHOD OF COMMUNICATION ACCEPTABLE TO JCI AS THE PRIMARY METHOD TO CONNECT CUSTOMER’S ALARM SYSTEM TO JCI’S ROC. JCI WILL NOT PROVIDE FIRE OR SMOKE ALARM

MONITORING FOR CUSTOMER BY MEANS OTHER THAN AN APPROVED TELCO SERVICE AND CUSTOMER UNDERSTANDS THAT IT IS SOLELY

RESPONSIBLE FOR ASSURING THAT IT USES APPROVED TELCO SERVICE FOR ANY SUCH MONITORING AND THAT IT COMPLIES WITH NATIONAL FIRE ALARM STANDARDS AND LOCAL FIRE CODES. CUSTOMER ALSO UNDERSTANDS THAT IF CUSTOMER’S ALARM SYSTEM HAS A LINE CUT

FEATURE, IT MAY NOT BE ABLE TO DETECT ALARM SIGNALS IF THE TELCO SERVICE IS INTERRUPTED, AND THAT JCI MAY NOT BE ABLE TO

DOWNLOAD SYSTEM CHANGES REMOTELY OR PROVIDE CERTAIN AUXILIARY MON ITORING SERVICES THROUGH A NON -APPROVED TELCO SERVICE. CUSTOMER ACKNOWLEDGES THAT ANY DECISION TO USE A NON -APPROVED TELCO SERVICE AS THE METHOD FOR TRANSMITTING ALARM SIGNALS IS BASED ON CUSTOMER’S OWN INDEPENDENT BUSINESS JUDGMENT AND THAT ANY SUCH DECIS ION IS MADE WITHOUT ANY ASSISTANCE, INVOLVEMENT, INPUT, RECOMMENDATION, OR ENDORSEMENT ON THE PART OF JCI. CUSTOMER ASSUMES SOLE AND COMPLETE

RESPONSIBILITY FOR ESTABLISHING AND MAINTAINING ACCESS TO AND USE OF THE NON-APPROVED TELCO SERVICE FOR CONNECTION TO THE ALARM MONITORING EQUIPMENT. CUSTOMER FURTHER UNDERSTANDS THAT THE ALARM SYSTEM MAY BE UNABLE TO SEIZE THE TELCO SERVICE TO TRANSMIT AN ALARM SIGNAL IF ANOTHER CONNECTION HAS DISABLED, IS INTERFERING WITH, OR BLOCKING THE CONNECTION.

[END OF DOCUMENT]

Johnson Controls Planned Service Proposal
Prepared for CITY OF SANTA CLARITA CITY HALL

Customer Confidential
Do not copy (physically, electronically, or in any other media) without the express written permission of Johnson Controls, I nc. Page 95 of 95

/0/1/2/3 /4 /5 /6 /2 /7 /4 /8 /9 /10 /i255 /3 /12 /13 /i255 /14 /15 /16 /17 /12/18/19/13 /i255 /13 /19 /20 /21 /19 /22 /23 /i255 /i255 /24 /25 /26 /25 /25 /i255 /27 /12 /28 /29 /16 /12 /29 /i255 /0 /12 /29 /17 /13 /12 /30 /16 /31 /32 /33 /19 /i255 /34 /i255 /12 /35 /i255 /36
/i255 /i255 /i255
/i255
/i255 /i255 /i255 /0 /4 /7 /38 /i255/1/3/i255/39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /i255 /8 /39 /i255 /2 /6 /6 /5 /6 /5 /i255 /40 /6 /31 /8 /4 /40 /39 /i255 /25 /26 /25 /41 /i255 /i255 /i255/42/15/12 /17 /19 /i255 /31 /13 /19/43 /32 /13 /19 /44 /i255 /45 /46 /i255 /i255 /i255 /2 /32 /17 /32 /30 /21 /19 /i255 /8 /20 /19 /30 /32 /13 /i255 /i255 /i255 /26 /34 /47 /26 /25 /47 /25 /26 /25/41 /i255 /i255 /48 /49/50/48 /50/51/52 /53
/52 /54 /54 /55 /56 /57 /58 /i255 /59 /57 /60 /55/61/62/63/58 /64 /55 /57 /48/50/51/52 /53
/i255 /i255 /65 /64 /66 /66 /i255 /67 /55 /68/0 /4 /7 /38 /i255/1/3/i255 /39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /25 /41 /69 /25 /26 /i255 /70 /8 /9 /6 /2 /0 /4 /8 /i255 /71 /9 /70 /5 /72 /i255 /39 /73 /4 /7 /6 /i255 /41 /26 /26 /i255 /39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /i255 /0 /8 /73 /39 /8 /i255 /69 /34 /41 /36 /36
/i255 /i255/74/56/55 /58 /75 /i255 /49 /75/60 /75 /61 /75 /57 /54 /75 /i255 /76 /56/62/77/75 /61 /68/34 /78 /34 /9 /70 /39 /2 /69 /79 /80 /i255 /i255 /48 /61 /55 /81 /75 /54 /58 /i255 /76/63/62/75/68 /0 /4 /7 /38 /i255/1/3/i255 /39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /i255 /8 /39 /i255 /2 /6 /6 /5 /6 /5 /i255 /40 /6 /31 /8 /4 /40 /39 /i255 /25 /26 /25 /41 /i255 /i255 /51 /64 /58 /75 /68 /0 /4 /7 /38 /i255/1/3/i255 /39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /i255 /0 /4 /7 /38 /i255 /82 /8 /9 /9 /25 /41 /69 /25 /26 /i255 /70 /8 /9 /6 /2 /0 /4 /8 /i255 /71 /9 /70 /5 /i255 /39 /7 /6 /i255 /41 /26 /26 /39 /8 /2 /7 /8 /i255 /0 /9 /8 /40 /4 /7 /8 /i255 /i255 /i255 /0 /8 /i255 /i255 /69 /34 /41 /36 /36 /78 /36 /41 /34 /83 /i255 /i255/65 /61 /63 /57 /54 /84 /i255 /59 /57/60 /55 /68 /27/1/82/2 /39/1/2/i255 /0/1/2/7 /40/1/9/39 /i255 /9/1/39/i255 /8 /2/80/6/9 /6 /39 /i255 /0 /8 /i255 /0 /71 /i255 /78 /i255 /26 /2 /26 /80 /i255 /i255 /52 /58 /58 /57 /68 /80/30/19 /29 /i255 /5 /15 /13 /35 /19 /19 /85 /56 /86 /58 /55/62/75/61 /i255 /59 /57 /60/55 /61/62/63/58 /64 /55 /57 /i255 /i255 /i255 /76 /63/62/75/68 /80/30/19 /29 /i255 /5 /15 /13 /35 /19 /19 /i255 /i255
/7 /28 /21 /16 /i255 /43 /13 /12 /43/12 /16 /32 /30 /i255 /21 /16 /i255 /28 /19 /13 /19 /45 /46 /i255 /32 /14 /14 /19 /43 /17 /19 /44 /i255 /32 /29 /44 /i255 /27 /12 /28 /29 /16 /12 /29 /i255 /0 /12 /29 /17 /13 /12 /30 /16 /i255 /21 /16 /i255 /32 /15 /17 /28 /12 /13 /21 /87 /19 /44 /i255 /17 /12 /i255 /43 /13 /12 /14 /19 /19 /44 /i255 /22 /21 /17 /28 /i255 /17 /28 /19 /i255 /22 /12 /13 /88 /72 /i255 /16 /15 /45 /89 /19 /14/17 /i255 /17 /12 /i255 /14 /13 /19 /44 /21 /17 /i255 /32 /43 /43 /13 /12 /20 /32 /30/i255 /71 /46 /i255 /27 /12 /28 /29 /16 /12 /29 /i255 /0 /12 /29 /17 /13 /12 /30 /16 /72 /i255 /4 /29 /14 /23 /i255/90/21/30 /22 /32 /15 /88 /19 /19 /72 /i255/91/4/23 /i255 /i255/i255 /i255 /i255/91/19/i255 /43 /13 /12 /43 /12/16 /19 /i255 /17 /12 /i255 /35 /15 /13 /29 /21 /16 /28 /i255 /17 /28 /19 /i255/18/32/17 /19 /13 /21 /32 /30 /16 /i255 /32 /29 /44 /47 /12 /13 /i255 /43 /19 /13 /35 /12 /13/18/i255/17 /28 /19 /i255 /22 /12 /13 /88 /i255 /45 /19 /30 /12 /22 /i255 /35 /12 /13 /i255 /17 /28 /19 /i255 /29 /19 /17 /i255 /43 /13 /21 /14 /19 /i255 /12 /35 /10 /i255 /92 /25 /26 /26 /72 /26 /26 /26 /23 /26 /26 /i255
/i255 /i255 /i255 /i255 /i255 /i255 /7 /28 /21 /16 /i255 /43 /13 /12 /43/12 /16 /32 /30 /i255 /21 /16 /i255 /20 /32 /30 /21 /44 /i255 /17 /28 /13 /12 /15 /33 /28 /10 /26 /25 /47 /26 /34 /47 /25 /26 /25 /41 /85 /59 /67 /93 /i255/50/94/i255 /51 /52 /76 /67 /52 /i255 /85 /53 /52 /49 /59 /67/52/95 /55 /84 /57 /86 /55 /57 /i255 /85 /55 /57 /58 /61 /55 /66 /86 /i255 /59 /57 /54 /96 /39 /21 /33 /29 /32 /17 /15 /13 /19 /10/i255/39 /21 /33 /29 /32 /17 /15 /13 /19 /10 /2 /32/18/19/10/i255/i255 /2 /32/18/19/10
/7 /21 /17 /30 /19 /10/i255/7 /21 /17 /30 /19 /10 /i255 /5 /32 /17 /19 /10/i255/5 /32 /17 /19 /10 /i255
/31/1/10/i255

EXHIBIT A
/0/1/2/3 /4 /5 /6 /2 /7 /4 /8 /9 /10 /i255 /3 /12 /13 /i255 /14 /15 /16 /17 /12/18/19/13 /i255 /13 /19 /20 /21 /19 /22 /23 /i255 /i255 /24 /25 /26 /25 /25 /i255 /27 /12 /28 /29 /16 /12 /29 /i255 /0 /12 /29 /17 /13 /12 /30 /16 /31 /32 /33 /19 /i255 /25 /i255 /12 /34 /i255 /35
/36 /37 /38 /39 /38 /40 /41 /42 /i255/44/45/46 /37 /45 /47 /46 /48 /i255 /i255 /i255 /i255 /i255 /49 /46 /50 /46 /51 /47 /52 /40 /53 /54 /55 /38 /39 /46 /i255 /38 /51 /i255/56/38/37 /57 /58 /i255 /i255 /i255 /i255/59 /30 /32 /29 /60 /19 /17 /i255 /31/1/i255/61 /19 /13 /i255 /32 /33 /13 /19 /19 /62 /i255 /15 /61 /12 /29 /i255 /63 /12 /15 /13 /14 /19 /22 /19 /30 /30 /i255 /13 /32 /17 /19 /16 /23 /8 /30 /30 /i255 /27 /0 /4 /i255 /61 /13 /21 /14 /21 /29 /33 /i255 /61 /13 /12 /20 /21 /62 /19 /62 /i255 /15 /29 /62 /19 /13 /i255 /17 /28 /21 /16 /i255 /32 /33 /13 /19 /19/18/19/29 /17 /i255 /22 /21 /30 /30 /i255 /64 /19 /i255 /21 /29 /i255 /32 /14 /14 /12 /13 /62 /32 /29 /14 /19 /i255 /22 /21 /17 /28 /i255 /17 /28 /19 /27 /12 /28 /29 /16 /12 /29 /i255 /0 /12 /29 /17 /13 /12 /30 /16 /i255 /63 /12 /15 /13 /14 /19 /22 /19 /30 /30 /i255 /14 /12 /29 /17 /13 /32 /14 /17 /i255 /65 /26 /66 /26 /67 /25 /67 /68 /27 /69 /2 /8 /30 /30 /i255 /64 /15 /21 /30 /62 /21 /29 /33 /16 /i255 /64 /19 /30 /12 /22 /i255 /22 /21 /30 /30 /i255 /61 /19 /13 /17 /32 /21 /29 /i255 /17 /12 /i255 /17 /28 /21 /16 /i255 /14 /12 /29 /17 /13 /32 /14 /17 /0 /4 /7 /70 /i255 /69 /8 /9 /9 /i255
/59 /71 /63 /4 /2 /6 /63 /63 /i255 /4 /2 /0 /71 /59 /8 /7/1/72/i255 /7 /72 /8 /2 /63 /4 /7 /i255 /3 /8 /0 /4 /9 /4 /7 /70 /i255 /31 /15 /64 /30 /21 /14 /i255/73/12/13 /60 /i255 /0 /12 /13 /61 /12 /13 /32 /17 /19 /i255 /70 /32 /13 /62 /27 /32 /29 /i255 /69 /19 /21 /62 /17 /i255 /2 /19 /22 /28 /32 /30 /30 /i255/74/19/17 /13 /12 /30 /21 /29 /60 /i255 /63 /17 /32 /17 /21 /12 /29 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255/74/19/17 /13 /12 /30 /21 /29 /60 /i255 /63 /17 /32 /17 /21 /12 /29 /75 /4 /8 /i255 /31 /13 /21 /29 /14 /19 /16 /16 /32 /i255/74/19/17 /13 /12 /30 /21 /29 /60 /i255 /63 /17 /32 /17 /21 /12 /29 /0 /28 /32 /29 /29 /19 /30 /i255 /25 /26 /i255 /31 /15 /64 /30 /21 /14 /i255 /8 /14 /14 /19 /16 /16 /i255 /7 /75 /i255 /63 /17 /15 /62 /21 /12 /16 /1/30/62 /i255 /7 /12 /22 /29 /i255 /2 /19 /22 /28 /32 /30 /30 /i255 /31 /32 /13 /60 /21 /29 /33 /i255 /63 /17 /13 /15 /14 /17 /15 /13 /19 /75 /8 /9 /6 /2 /0 /4 /8 /i255 /9 /4 /59 /72 /8 /72 /70 /27/1/i255/8 /2 /2 /6 /i255 /5 /8 /72 /0 /70 /i255 /9 /4 /59 /72 /8 /72 /70 /1/9/5 /i255 /7/1/73
/2/i255 /2 /6/73/69/8 /9 /9 /i255 /9 /4 /59 /72 /8 /72 /70 /1/30/62 /i255/1/13/14 /28 /32 /13 /62 /i255 /31 /32 /13 /60 /i255 /i255 /2 /19 /22 /28 /32 /30 /30 /i255 /31 /32 /13 /60 /i255 /32 /29 /62 /i255 /32 /76 /15 /32 /17 /21 /14 /16 /i255 /i255 /75 /32 /30 /19 /29 /14 /21 /32 /i255/18/19/32 /62 /12 /22 /16 /i255 /61 /32 /13 /60 /i255 /32 /29 /62 /i255 /32 /76 /15 /32 /17 /21 /14 /16 /i255 /i255 /75 /32 /30 /19 /29 /14 /21 /32 /i255 /33 /30 /19 /29 /i255 /61 /32 /13 /60 /i255 /32 /29 /62 /i255 /32 /76 /15 /32 /17 /21 /14 /16 /i255 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255 /31 /32 /13 /60 /i255 /32 /29 /62 /i255 /32 /76 /15 /32 /17 /21 /14 /16 /i255 /i255 /2 /12 /13 /17 /28 /i255/1/32/60 /16 /i255 /31 /32 /13 /60 /i255 /32 /29 /62 /i255 /32 /76 /15 /32 /17 /21 /14 /16 /i255 /i255 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255 /63 /61 /12 /13 /17 /16 /i255 /0 /12/18/61/30 /19 /77 /i255/78/79/18/i255/i255 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255 /63 /61 /12 /13 /17 /16 /i255 /0 /12/18/61/30 /19 /77 /i255 /7 /28 /19 /i255 /0 /19 /29 /17 /13 /19 /i255 /i255 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255 /63 /61 /12 /13 /17 /16 /i255 /0 /12/18/61/30 /19 /77 /i255 /8 /76 /15 /32 /17 /21 /14 /16 /i255 /0 /19 /29 /17 /19 /13 /i255 /63 /32 /29 /17 /32 /i255 /0 /30 /32 /13 /21 /17 /32 /i255 /63 /61 /12 /13 /17 /16 /i255 /0 /12/18/61/30 /19 /77 /i255 /63 /60 /32 /17 /19 /i255 /31 /32 /13 /60 /i255 /i255 /0 /32 /29 /79 /12 /29 /i255 /0 /12 /15 /29 /17 /13 /79 /i255 /31 /32 /13 /60 /i255 /i255 /75 /21 /16 /17 /32 /i255 /0 /32 /29 /79 /12 /29 /i255 /31 /32 /13 /60 /i255 /i255 /67 /2 /19 /22 /28 /32 /30 /30 /i255 /0 /12/18/18/15/29 /21 /17 /79 /i255 /0 /19 /29 /17 /19 /13 /i255 /i255 /0 /32 /29 /79 /12 /29 /i255 /0 /12 /15 /29 /17 /13 /79 /i255 /14 /12/18/18/15/29 /21 /17 /79 /i255 /14 /19 /29 /17 /19 /13 /i255 /i255 /0 /19 /29 /17 /13 /32 /30 /i255 /31 /32 /13 /60 /i255 /i255 /7 /28 /19 /i255/74/32/21 /29 /i255 /7 /28 /19 /32 /17 /13 /19 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255 /i255
/i255
/i255
/i255
/i255 /i255 /i255 /i255 /i255 /i255 /i255 /80 /81 /55 /42 /82 /40 /47/38 /50 /40 /58 /i255 /i255 /i255 /i255/67 /23 /9 /32 /64 /12 /13 /i255 /12 /13 /i255/18/32/17 /19 /13 /21 /32 /30 /i255 /29 /12 /17 /i255 /16 /61 /19 /14 /21 /34 /21 /14 /32 /30 /30 /79 /i255 /62 /19 /16 /14 /13 /21 /64 /19 /62 /i255 /32 /64 /12 /20 /19 /i255 /21 /16 /i255 /19 /77 /14 /30 /15 /62 /19 /62 /i255 /34 /13 /12/18/i255/17 /28 /21 /16 /i255 /61 /13 /12 /61 /12 /16 /32 /30 /23 /i255 /25 /23 /71 /29 /30 /19 /16 /16 /i255 /12 /17 /28 /19 /13 /22 /21 /16 /19 /i255 /16 /17 /32 /17 /19 /62 /83 /i255 /32 /29 /79 /i255 /32 /29 /62 /i255 /32 /30 /30 /i255 /12 /20 /19 /13 /17 /21/18/19/i255 /30 /32 /64 /12 /13 /i255 /21 /16 /i255 /19 /77 /14 /30 /15 /62 /19 /62 /i255 /34/13 /12/18/i255/17 /28 /21 /16 /i255 /61 /13 /12 /61 /12 /16 /32 /30 /23 /84 /23 /8 /61 /61 /30 /21 /14 /32 /64 /30 /19 /i255 /17 /32 /77 /19 /16 /i255 /12 /13 /i255 /16 /61 /19 /14 /21 /32 /30 /i255 /34 /13 /19 /21 /33 /28 /17 /i255 /14 /28 /32 /13 /33 /19 /16 /i255 /32 /13 /19 /i255 /19 /77 /14 /30 /15 /62 /19 /62 /i255 /34 /13 /12/18/i255/17 /28 /21 /16/i255 /61 /13 /12 /61 /12 /16 /32 /30 /i255

EXHIBIT A

Santa Clarita City CouncilFebruary 28, 2023

Santa Clarita City Council
February 28, 2023