Santa Monica City Council
August 11, 2026

Motors Option $3,000.00
HVAC 3 TK System w/General Electric Field Wound Motors (Cond & Evap) Deduction ($2,000.00)HVAC 4 TK System w/General Electric P.M. Motors Deduction ($1,300.00)HVAC 5 TK System w/X430Compressor Deduction ($900.00)HVAC 6 TK System w/S391 Screw Compressor Standard IncludedHVAC 7 TK System w/S616 Screw Compressor Option $3,000.00 HVAC 8 TK Electric HVAC System TEA14 (including alternator for Diesel buses) Option $14,495.00 HVAC 9 TK Pressure and Return Gauges Mounted to Unit Option $356.00 HVAC 10 R407c Refrigerant Option $322.00 HVAC 11 MCC Drivers Heater W/Brushless Motors Standard IncludedHVAC 12 MCC Drivers Heater W/Brush Motors Deduction ($387.00)HVAC 13 MCC Front Stepwell/Threshold Heater W/Brushless Motor (Each) Option $324.00 HVAC 14 MCC Underseat/Rear Stepwell Heater W/Brushless Motor (Each) Option $458.00 HVAC 15 MCC Underseat/Rear Stepwell Heater W/Brush Motor (Each) Not Applicable NAHVAC 16 Sutrak All Electric Air Conditioning - Roof Mount Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 HVAC 17 Sutrak All Electric Air Conditioning - Rear Mount (Diesel & CNG only) Not Applicable NA HVAC 18 ACT Convection Heater Not Applicable NAHVAC 19 ACT Espar Fuel-Fired Supplemental Coolant Heater Not Applicable NAHVAC 20 Warm Welcome Mat (Rear Door) Option $282.00 HVAC 21 Warm Welcome Mat (Installed on W/C Ramp) Not Applicable NAHVAC 22 Eberspacher AC 136 G3 AE Not Applicable NAHVAC 23 Air Purification System (Climate Comfort Technologies CCT-24 unit) Option $2,188.00 HVAC 24 TK Electric HVAC System TE14 (For BAE Hybrid buses only) Option $1,160.00 HVAC 25 TK Electric HVAC System TE18 (For BEB buses only) Standard IncludedHVAC 26 Sutrak All Electric Air Conditioning - Rear Mount (Diesel only) Option $15,948.00 HVAC Special Purpose
HVAC Special Purpose 1 TK Intelligaire - Diagnostics Option $1,709.00 HVAC Special Purpose 2 Carrier Micromax ATE Diagnostics Not Applicable NAHVAC Special Purpose 3 Webasto Diagnostic Tool Option $494.00 HVAC Special Purpose 4 Van Steenburgh Regional Recovery System (JV90- 1) Option $10,138.00 HVAC Special Purpose 5 Eberspacher diagnostics Not Applicable NA Other Option - Specify
Manuals
Manuals 1 Drivers Handbook (1 Manual/1 CD per Bus Order) Standard IncludedManuals 2 Service Manual (1 Manual/1 CD per Bus Order Standard IncludedManuals 3 Parts Manual (1 Manual/1CD per Bus Order) Standard IncludedManuals 4 Electrical Schematics (1 Manual/1CD per Bus Order) Standard IncludedManuals 5 Vendor Manuals (1 Manual/1 CD per Bus Order) Standard IncludedManuals 6 Additional Driver's Handbook Option $10.00 Manuals 8 Additional Parts Manuals Option $70.00 Manuals 9 Additional Electrical Schematics Option $70.00 Manuals 10 Additional Electrical Multiplex Option $15.00 Manuals 11 Additional Cummins ISL Manuals (4 Books) Option $515.00 Manuals 12 Additional Allison B400 Manuals (6 Books) Option $400.00 Manuals 13 Additional ZF 6hp594 Manuals (5 Books) Option $400.00 Manuals 14 Additional Voith Manuals (7 Books) Option $400.00 Manuals 15 Additional Amerex Manuals Option $50.00 Manuals 16 Additional TRW Steering Gear Manuals Option $30.00 Manuals 17 Additional Thermo King Manual Option $30.00 Manuals 18 Additional Carrier HVAC Manuals (2 Books) Option $30.00 Other Option - Specify
Safety
Safety 2 Amerex V-25lb ABC System Standard Diesel & Hybrid IncludedSafety 3 Amerex VH-25lb ABC Cylinder Not Applicable NASafety 4 Amerex V-30lb ABC Cylinder Not Applicable NASafety 5 Amerex Fire Suppression System w/Automatic Shutdown, Programmable Heat Detectors (PHDs) and Automatic Maintenance Testing (AMT) Not Applicable NASafety 6 Amerex Safety Net 2-Zone Fire Detection/Suppression System Not Applicable NASafety 7 Jomar Firestick Liquid Not Applicable NASafety 8 Kidde - Dual Spectrum Option $333.00 Safety 9 Kidde - Ltd Spectrum Option $233.00 Safety 10 Kidde TLSE Spectrum Not Applicable NASafety 11 Fogmaker Fire Suppression System (water mist) Option $1,248.00 Safety 14 Firetrace Automatic Fire Detection/Suppression System (gas detection base system) Not Applicable NASafety 15 Remove Amerex Deduction ($2,099.00)Safety 16 Fire Extinguisher and Safety Triangle Kit Standard IncludedSafety 17 Twenty - Four Unit First Aid Kit Option $69.00 Safety 18 Ten Unit First Aid Kit Not Applicable NASafety 19 Blood Borne Pathogens Kit Option $35.00 Safety 20 Bio - Hazard Disposal Kit Option $35.00 Safety 21 High Temperature Protective Sleeves for Component Lines Not Applicable NASafety 22 (3) 20 - Minute Road Flares Not Applicable NASafety 23 Wheel Chocks (Per Set) Option $35.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Safety 24 Electric - Standard no fire suppression Standard Included Safety 25 Amerex Safety Net with Methane Detection ABC System Standard CNG only IncludedSafety 26 Fogmaker Fire Suppression System w/Methane Detection (water mist) Option CNG only $678.00 Steering
Steering 1 Ross Model TS 65 Not Applicable NASteering 2 Sheppard Model M110 Not Applicable NASteering 3 TRW Electric Assisted Steering $2,494.00 Steering 4 TRW TAS6505 Standard IncludedSteering 5 Standard Size Padded Steering Wheel Standard IncludedSteering 6 Douglas Autotech 'Double-Knuckle' Steering Column (PN 9003148-C) Option $1,200.00 Other Option - Specify
Towing & Hoisting
Towing & Hoisting 1 Set Towing Adapters/Tow Bar Option $2,667.00 Towing & Hoisting 2 Set of Hoist Adapters (Includes the 4 Following Items) Option $3,883.00 Towing & Hoisting 3 Incl w/set - Front Saddle incl with setTowing & Hoisting 4 Incl w/set - Front Adapters incl with setTowing & Hoisting 5 Incl w/set - Rear Saddle incl with setTowing & Hoisting 6 Incl w/set - Rear Adapters incl with setTowing & Hoisting 7 Front towing point Not Applicable NATowing & Hoisting 8 Rear towing point Not Applicable NA Other Option - Specify
Training
Training 1 none Standard $0.00 Training 2 Operator Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 3 Operator Orientation - 8 Hours, (Procuring Agency) Standard $0.00 Training 4 Operator Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 5 Maintenance Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 6 Maintenance Orientation - 24 Hours, (Procuring Agency) Option $5,000.00 Training 7 Maintenance Orientation - 32 Hours, (Procuring Agency) Not Applicable NATraining 8 Maintenance Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 9 Technical Training - 96 Hours, (Procuring Agency) Price Proposal Form Option $20,000.00 Training 10 Technical Training - Additional hours of training, per 24hr module Option $5,000.00 Training 11 OEM Training - Two Slots for "Train the Trainers" Technical Instruction; PER DAY Option $900.00 Training 12 OEM Training - Additional Slots for "Train the Trainers" Technical Instruction; PER DAY PER ADD'L STUDENT Option $450.00 Training 13 Body, Chassis, Suspension and Steering - (8 Hour Class), Procuring Agency Not Applicable NATraining 14 Body, Chassis, Suspension and Steering - (24 Hour Class), Procuring Agency Option $5,000.00 Training 15 Body, Chassis, Suspension and Steering - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 16 Electrical and Electronics - (8 Hour Class), Procuring Agency Training 17 Electrical and Electronics - (24 Hour Class), Procuring Agency Option $5,000.00 Training 18 Electrical and Electronics - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 19 Air and Brake Systems - (24 Hour Class), Procuring Agency Option $5,000.00 Training 20 Air and Brake Systems - (8 Hour Class), Procuring Agency Not Applicable NATraining 21 Air and Brake Systems - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 22 HVAC and Climate Controls - (4 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 23 HVAC and Climate Controls - (8 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 24 HVAC and Climate Controls - Additional hours of training per hour, Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 25 Engine - (8 Hour Class), per Student at Procuring Agency Option $450.00 Training 26 Engine - (24 Hour Class), per Student at Procuring Agency Option $1,350.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 27 Engine - additional hour of training per hour, per Student at Procuring Agency Option Quote Training 28 Transmission - (8 Hour Class), per Student, at Procuring Agency Option $450.00 Training 29 Transmission - (24 Hour Class), per Student, at Procuring Agency Option $1,350.00 Training 30 Transmission - Additional hour of training per hour, per Student, at Procuring Agency Option QuoteTraining 31 Wheelchair Ramp - (2 Hour Class), at Procuring Agency Not Applicable NATraining 32 Wheelchair Ramp - (4 Hour Class), at Procuring Agency Standard $0.00 Training 33 Wheelchair Ramp - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 34 Destination Sign - (4 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 35 Destination Sign - (8 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 36 Destination Sign - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 38 Axles and Tires - Procuring Agency. Included in Body/Chassis Option $5,000.00 Training 39 Fire Suppression - (4 Hour Class), at Procuring Agency Standard $0.00 Training 40 Fire Suppression - (8 Hour Class), at Procuring Agency Standard $0.00 Training 41 Fire Suppression - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 42 Engine OEM Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 43 Engine OEM Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 44 Engine OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NATraining 45 Transmission Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 46 Transmission Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 47 Transmission Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 48 Data Communications System OEM Training (4 Hour Class, Per Person), at Local Dealer Not Applicable NA Training 49 Data Communications System OEM Training (8 Hour Class, Per Person), at Local Dealer Not Applicable NA Training 50 Data Communications System OEM Training (Additional hour of training per hour, 2 Persons), at Local Dealer Not Applicable NA Training 51 Hybrid Drive - (8 Hour Class), at Procuring Agency Not Applicable NATraining 52 Hybrid Drive - (24 Hour Class), at Procuring Agency Not Applicable NATraining 53 Hybrid Drive - (Additional hour of training per hour), at Procuring Agency Not Applicable NATraining 54 Hybrid Drive OEM Training (8 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 55 Hybrid Drive OEM Training (24 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 56 Hybrid Drive OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 57 Hybrid Transmission Training - (8 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 58 Hybrid Transmission Training - (24 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 59 Hybrid Transmission Training - (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 60 Additional training …
Other Option - Specify
Training Equipment Modules
Training Equipment Modules 1 Fare Collection OEM Training (up to 10), 4 Day At Local Dealer Not Applicable NATraining Equipment Modules 2 ISL/Voith D864.5 Not Applicable NATraining Equipment Modules 3 ISL/ZF 6AP1400B Not Applicable NATraining Equipment Modules 4 ISL/ZF HP594 Not Applicable NATraining Equipment Modules 5 ISX 12 G Not Applicable NATraining Equipment Modules 6 ISL G Not Applicable NATraining Equipment Modules 7 HVAC Training Module Option $43,213.00 Training Equipment Modules 8 I/O Controls Multiplex Board Option $17,750.00 Training Equipment Modules 9 Air Brake Training Board Option $35,938.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training Equipment Modules 10 ISB 6.7 Not Applicable NA Training Equipment Modules 11 ISL/B400R Power Plant Not Applicable NATraining Equipment Modules 12 L9/Voith D864.5 Training Module Option $198,114.00 Training Equipment Modules 13 L9/ZF 6AP1400B Training Module Option $194,647.00 Training Equipment Modules 14 L9N (CNG) Option $67,433.00 Training Equipment Modules 15 B6.7 (Hybrid engine) Option $50,369.00 Training Equipment Modules 16 L9/B400R Training Module Option $198,665.00 Training Equipment Modules 17 L9/B400R Power Plant Option $76,536.00 Training Equipment Modules 18 L9/Voith D864.5 Power Plant Option $74,950.00 Training Equipment Modules 19 L9/ZF 6AP1400B Power Plant Option $74,885.00 Training Equipment Modules 20 Fare Collection OEM Training (up to 10), 4 Day At Customer Site Option $7,495.00 Transmission
Transmission 1 Allison B- 400R, GEN IV Standard IncludedTransmission 2 Allison B- 500R, GEN IV Not Applicable NATransmission 3 Allison B- 500, GEN V Not Applicable NATransmission 4 Allison B- 500R, GEN V Not Applicable NATransmission 5 Voith D854.6 Option ($3,118.00)Transmission 6 ZF 6AP1400B Option ($2,973.00)Transmission 7 ZF 6HP594 Not Applicable NATransmission 8 "Transynd" Synthetic Standard IncludedTransmission 9 Titan Probalizer OD- 1014 Option $34.00 Transmission 10 Davco Electronic Fluid Level Gauge Option $134.00 Transmission 11 Keyed Transmission Lockout Switch on Dash Option $351.00 Transmission 12 Transmission Oil Temperature Gauge (Dash and Rear Run Box) Option $100.00 Transmission 13 Electric Transmission - 2 speed Not Applicable NATransmission 14 Electric Transmission - 4 speed Not Applicable NA Other Option - Specify
Transmission Diagnostics
Transmission Diagnostics 1 Allison Cable & Software Option $2,353.00 Transmission Diagnostics 2 Voith Cable & Software Option $1,254.00 Transmission Diagnostics 3 Voith Service Tool Kit Not Applicable NATransmission Diagnostics 4 Set of ZF Diagnostics (Includes the 3 Following Items) Option $3,248.00 Transmission Diagnostics 5 Includes - Testman Diagnostic System incl with setTransmission Diagnostics 6 Includes - SAE Cable incl with setTransmission Diagnostics 7 Includes - Ecomat Testman Software incl with set Other Option - Specify
W/C Restraints
W/C Restraints 1 AMSECO - A.R.M. Standard IncludedW/C Restraints 2 AMSECO Reliant Mobility Aid Securement System Not Applicable NAW/C Restraints 3 AMESCO Passive rear-facing restraints (rear facing barriers) per ADA location Option $833.00 W/C Restraints 4 USSC - First Option $0.00 W/C Restraints 5 Freedman - First Option $0.00 W/C Restraints 6 Q'Straint - QRT Standard IncludedW/C Restraints 7 Q'Straint - ORT 360 per ADA location Option $281.00 W/C Restraints 8 Q'Straint - Q'UBE 3- Point Securement Station per ADA location Option $104.00 W/C Restraints 9 Q'Straint - Quantum Securement System per ADA location Option $10,588.00 W/C Restraints 10 Q'Strant/Sure-Lok - OMNI Floor Anchor System per ADA location Option $113.00 W/C Restraints 11 Q’Straint Slide N Click floor mount restraint system per ADA location Option $0.00 W/C Restraints 12 USSC/Freedman Q- Pod W/C Restraint System per ADA location Option $3,950.00 W/C Restraints 13 AMESCO Dual Auto Lock W/C Restraint System per ADA location Option $91.00 W/C Restraints 14 USSC - V- PRO Option $0.00 W/C Restraints 15 Sure LOK - RTT Electric Not Applicable NAW/C Restraints 16 Sure LOK - RTT Manual Not Applicable NAW/C Restraints 17 Additional L-track per/foot Not Applicable NAW/C Restraints 18 RESNA WC18 compliant restraint Not Applicable NAW/C Restraints 19 RESNA WC19 compliant restraint Not Applicable NAW/C Restraints 20 AMSECO Q- Pod W/C Restraint System per ADA location Option $3,755.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Wheel Chair Ramp (low-floor
only) / Lift (high-floor only)
Wheel Chair Ramp (low-floor only) /
Lift (high-floor only) 1 Lift- U Model LU11, 1:6 Ratio, Front Door only Deduction ($175.00) Wheel Chair Ramp (low-floor only) /
Lift (high-floor only) 2 LIFT- U Model LU18, Dual- Mode 1:6 (Street)/1:8 (Sidewalk) Standard Included Wheel Chair Ramp (low-floor only) /
Lift (high-floor only) 3 Ricon 6:1 SA Self-Leveling Ramp Option $1,269.00 Wheel - Brakes
Wheel – Brakes 1 S - Cam Drum w/Wabsco ABS System - (DEDUCT) Deduction ($2,400.00)Wheel – Brakes 2 Front Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes 3 Rear Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes All Wheel Drum Brakes Deduction ($2,400.00)Wheel – Brakes 4 MGM “E-Stroke” Electronic Brake Monitoring System – Disc Brakes Option $1,845.00 Wheel – Brakes 5 MGM “E-Stroke” Electronic Brake monitoring System – Drum Brakes Option $1,879.00 Wheel – Brakes 6 All Wheel Disc Brakes Standard Included Other Option - Specify
Wheel - Hubometer
Wheel Hubometer 1 none Standard IncludedWheel Hubometer 2 Veeder Root w/o Tenths w/o Guard Option $72.00 Wheel Hubometer 3 S&A Fleetwatch 392 Electronic Option $436.00 Wheel Hubometer 4 E J Ward Data System (Includes Receiver, Display Unit and Antenna) Option QuoteWheel Hubometer 5 Engler (Stemco) Mechanical W/o Tenths W/o Guard Option $79.00 Wheel Hubometer 6 Engler Hubometer W/Powder Coat Guard Option $204.00 Other Option - Specify
Wheel - Hubs
Wheel Hubs 1 Hub Piloted Wheels and Axles W/Grease Seals Standard IncludedWheel Hubs 2 Hub Piloted w/Oil Seals (per Axle) Option $0.00 Wheel Hubs 3 Stud Piloted Wheels and Axles w/Grease Seals Option $395.00 Wheel Hubs 4 Stud Piloted Wheels and Axles w/Oil Seals Option $395.00 Wheel Hubs 5 Wabco Traction Control Standard IncludedWheel Hubs 6 Hydraulic drop down snow chain system Option Quote Other Option - Specify
Wheel - Tires
Wheel – Tires 1 Customer Supplied Standard IncludedWheel – Tires 2 Michelin XZU2 (305/85R/22.5) Not Applicable NAWheel – Tires 3 Michelin XZU2 (305/70R/22.5) Not Applicable NAWheel – Tires 4 Michelin X incity Z (305/70R/22.5) Not Applicable NAWheel – Tires 5 Michelin XZU3 (305/85/22.5) Not Applicable NAWheel – Tires 6 Michelin XZU2 (275/70R/22.5) Not Applicable NAWheel – Tires 7 Michelin XZE2+(H) (295/80/R22.5) Not Applicable NAWheel – Tires 8 G152 (305/85R/22.5) Not Applicable NAWheel – Tires 9 Goodyear G152 (305/70R/22.5) Not Applicable NAWheel – Tires 10 Goodyear G152 (275/70R/22.5) Option $4,375.00 Wheel – Tires 11 Firestone 18J (315/80R/22.5) Not Applicable NAWheel – Tires 12 Firestone 16H (305/70R/22.5) Not Applicable NAWheel – Tires 13 Bridgestone 16H (275/70R/22.5) Option $4,200.00 Wheel – Tires 14 Tire Pressure Monitoring System Option $1,163.00 Wheel – Tires 15 Michelin X incity (305/85R/22.5) Not Applicable NA Wheels
Wheels 1 (7) Powder Coated Steel Wheels (White and Black) Standard IncludedWheels 2 (7) Aluminum Alcoa - Full Polish Option $1,277.00 Wheels 3 (7) Aluminum Alcoa - Full Polish W/Dura Bright Finish Option $1,756.00 Wheels 4 (7) Aluminum Alcoa - Machine Finish Option $790.00 Wheels 5 (7) Aluminum Alcoa - Machine Finish W/Dura Bright Finish Option $1,294.00 Wheels 6 Remove Spare Wheel Deduction ($151.00)Wheels 7 Add Dura Flange to Alcoa (Per Wheel) Option $173.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify
Windows
Windows 2 Arow Laminated Safety Glass (1/4") - Framed Sliders Option $589.00 Windows 3 Arow Laminated Safety Glass (1/4") - Framed Fixed Deduction ($751.00)Windows 4 Arow Laminated Safety Glass (1/4") - Framed Transom - openable Standard IncludedWindows 5 Arow Hidden Framed Bonded - Fixed Option $2,306.00 Windows 6 Arow Hidden Framed Bonded - Transom -openable Option $3,609.00 Windows 7 Add Window Guards per bus (Acrylic Liner and Film) Option $750.00 Windows 8 anti-graffiti 3M film single layer (per inside window) Not Applicable NAWindows 9 Stormite flush-mount serviceable w/tip Not Applicable NAWindows 10 All windows equipped with liners attached Not Applicable NAWindows 11 Ricon Hidden Framed Bonded - Fixed Option $860.00 Windows 12 Ricon Hidden Framed Bonded - Transom -openable Option $3,426.00 Windows 13 anti-graffiti 3M film 4-layer (per bus, Ricon Only) Option $3,750.00 Windows 14 anti-graffiti 3M film 4-layer (per bus, Arow Only) Option $2,375.00 Windows 15 anti-graffiti 3M film single layer (per bus) Option $875.00 Other Items
Other Items 1 Brake System Diagnostics Not Applicable NAOther Items 2 Meritor Software (Tool Box), Serial Link/Interface Kit Option $432.00 Other Items 3 Engine Dolly Option $5,533.00 Other Items 4 Phillips Thermo Block Heater Option $140.00 Other Items 5 Engine Skid Protection Option $377.00 Other Items 6 Mobile Receiver for S&A 392 Hubometer Option $436.00 Other Items 7 Floor Mounted 4 -Way Flasher Switch Standard IncludedOther Items 8 Cup Holder Option $35.00 Other Items 9 Auxiliary Drivers Fan Option $89.00 Other Items 10 Stainless Steel Trash Bag Holder Option $170.00 Other Items 11 Transfer Cutter Option $63.00 Other Items 12 Keyed Ignition Switch Option $120.00 Other Items 13 Fiber Optic Backlighting on Drivers Dash Option $850.00 Other Items 14 Exterior Ad Frame - Front 21" X 40" Option $175.00 Other Items 15 Exterior Ad Frame - Curbside 30" X 88" Option $283.00 Other Items 16 Exterior Ad Frame -Streetside 30" X 144" Option $335.00 Other Items 17 Exterior Ad Frame Rear 21" X 72" Option $226.00 Other Items 18 I/O Controls LED Interior Lights Standard IncludedOther Items 19 Pretoria LED Interior Lights Option $0.00 Other Items 20 See II Transit Airfoil Not Applicable NAOther Items 21 Open Bottom Racks Option QuoteOther Items 22 Suburban Package Racks/Open Bottom Option QuoteOther Items 23 Twin Automatic Greasing System Not Applicable NAOther Items 24 EMCO -Wheaton Posi -Lock Nozzle Standard IncludedOther Items 25 Hybrid Drive Tools Not Applicable NAOther Items 26 Special Purpose Hybrid Drive Tool Kit Option $38,661.00 Other Items 27 BAE (APS2) beltless power pack Option $38,667.00 Other Items 28 WABCO E-COMP Not Applicable NAOther Items 29 ISB 6.7 Fold Up Wiring Diagram (hybrid option) Not Applicable NAOther Items 30 Allison Hybrid Manuals Not Applicable NAOther Items 31 BAE Hybrid Manuals Not Applicable NAOther Items 32 Allison Mid-Life Overhaul Parts List and Cost Not Applicable NAOther Items 33 BAE Mid-Life Overhaul Part List and Cost Not Applicable NAOther Items 34 winter weather package (heated front entrance) Not Applicable NAOther Items 35 First Aid kit for 24 people option Option $69.00 Other Items 36 2 front dash-mounted fans to defrost front door Standard IncludedOther Items 37 driver’s LED reading light Standard IncludedOther Items 38 driver’s sun visors Standard IncludedOther Items 39 driver’s foot controls- adjustable Kongsberg system Option $1,130.00 Other Items 40 Stainless Steel molding to cover edges on entrance and rear rise on passenger assist Option $387.00
Other Items 41 Separate control for non-synchronized wipers Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Category Item # Description Diesel CNG Hybrid Electric Fuel Cell Price Body BRT STYLING
Body – BRT STYLING 1 Standard Styling Package 29 passenger seats Standard Standard Standard Standard Included Body – BRT STYLING 2 BRT Exterior Styling Package (Front & Rear) with One or Two Piece Windshield Option Option Option Not Applicable $19,950.00Body – BRT STYLING 3 BRT Roof Fairings Front Option Not Applicable Option Not Applicable $1,250.00 Body – BRT STYLING 4 Curbside A Post Skid Plate Option Option Option Option $86.00Body – BRT STYLING 5 BRT Roof Fairings Rear Option Not Applicable Not Applicable Not Applicable $1,250.00Body – BRT STYLING 6 BRT Exterior Styling Package (Front Cap Only) with One or Two Piece Windshield Option Option Option Not Applicable $9,790.00 Body – BRT STYLING 7 BRT Plus Exterior Styling Package (Front, Rear & continuous roof line) with One or Two Piece Windshield Option Option Option Not Applicable $18,950.00

BODY - PASSENGER SEATS
BODY - PASSENGER SEATS 1 29 Passenger Seating Standard Standard Standard Standard Included BODY - PASSENGER SEATS 2 ADD additional double flip seat in lieu of fixed seat Option Option Option Option QUOTE BODY - PASSENGER SEATS 3 Remove one set of fixed seats Option Option Option Option QUOTEBODY - PASSENGER SEATS 4 remove individual seat Option Option Option Option QUOTE Engine
Engine 1 Cummins ISL-G 320 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 2 Cummins ISX-G 12 400 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 3 Cummins ISL-G 320 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 4 Cummins ISX-G 12 400 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 5 Cummins ISB 6.7 280 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 6 Cummins L9N 280 HP Not Applicable Standard Not Applicable Not Applicable IncludedEngine 7 Cummins L9 280 HP Standard Not Applicable Not Applicable Not Applicable Included Engine 8 Cummins L9 330 HP Option Not Applicable Not Applicable Not Applicable $2,413.00Engine 9 Cummins B6.7 280HP Not Applicable Not Applicable Standard Not Applicable Included Exhaust
Exhaust 1 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 2 Diesel Particulate Filter (Active) Standard Not Applicable Standard Not Applicable Included Exhaust 3 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 4 Diesel Particulate Filter (Active) Standard Not Applicable Standard Not Applicable Included Exhaust 5 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 6 Electric Not Applicable Not Applicable Not Applicable Standard IncludedExhaust 7 Not Applicable Fuel
Fuel 1 Fuel Gauge on Dash Option Option Option Not Applicable $134.00 Fuel 2 NGV2-3 Type 3 Complete CNG Cylinder (Vendor will list GGE) Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 3 NGV 2-4 Type 4 Complete CNG Cylinder (Vendor will list GGE) Not Applicable Standard Not Applicable Not Applicable Included Fuel 4 Hexagon Lincoln's TUFFSHELL Roof Mount Package Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 5 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) Standard Not Applicable Standard Not Applicable Included Fuel 6 EMCO - Posi/Lock Blue Urea Dispensing System Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 7 Standard Gravity Fill Deduction Not Applicable Deduction Not Applicable ($265.00) Fuel 8 Fuel Gauge on Dash Option Option Option Not Applicable $134.00 Fuel 9 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill Option Not Applicable Option Not Applicable $834.00Fuel 10 80 Gallon Net Useable Split Fuel Tanks Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 11 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) Standard Not Applicable Standard Not Applicable Included Fuel 12 EMCO - Posi/Lock Blue Urea Dispensing System Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 13 Standard Gravity Fill Deduction Not Applicable Deduction Not Applicable ($265.00) Fuel 14 Fuel Gauge on Dash Option Option Option Not Applicable $134.00 Fuel 15 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill Option Not Applicable Option Not Applicable $834.00 Fuel 16 80 Gallon Net Useable Split Fuel Tanks for ADA Each Side Not Applicable Not Applicable Not Applicable Not Applicable NA Heavy Duty - 35 Foot
Options Price Sheet
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Fuel 17 NGV 2-4 Type 4 Complete CNG Cylinder (20,000 SCF) Not Applicable Standard Not Applicable Not Applicable Included Fuel 18 NGV 2-4 Type 4 Complete CNG Cylinder (16,000 SCF) Not Applicable Option Not Applicable Not Applicable QUOTE Fuel Filter
Fuel Filter 1 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 2 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 3 Spin on Primary and Secondary Fuel Filters Standard Standard Standard Not Applicable IncludedFuel Filter 4 Davco Fuel Pro 384, Heated Option Not Applicable Option Not Applicable $379.00 Fuel Filter 5 Racor 490R30 Filter W/Thumbpump Option Not Applicable Option Not Applicable $165.00 Fuel Filter 6 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 7 Spin on Primary and Secondary Fuel Filters Standard Standard Standard Not Applicable IncludedFuel Filter 8 Davco Fuel Pro 384, Heated Option Not Applicable Option Not Applicable $379.00 Fuel Filter 9 Racor 490R30 Filter W/Thumbpump Option Not Applicable Option Not Applicable $165.00 Hybrid
Hybrid 1 none Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 2 none Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 3 Auxiliary Coolant Heater Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 4 Allison EP40 Electric Drive System Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 5 Allison EP50 Electric Drive System Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 6 BAE Hybrid System HDS 200 - APS1-01K (1Kwh Battery w/Ultracaps) Not Applicable Not Applicable Standard Not Applicable Included Hybrid 7 BAE Hybrid System HDS200 - APS2-32K (32KwH Battery) Not Applicable Not Applicable Option Not Applicable $25,000.00 Hybrid 8 BAE Hybrid System HDS300 - APS1-01K (1Kwh Battery w/Ultracaps) Not Applicable Not Applicable Standard Not Applicable Included Hybrid 9 BAE Hybrid System HDS300 - APS3-32K (32KwH Battery) Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options
Passenger Seat Options 1 29 Passenger Seating - Citiseat Option Option Option Option $667.00 Passenger Seat Options 2 AMSECO - 6468 Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 3 AMSECO - Insight Standard Standard Standard Standard IncludedPassenger Seat Options 4 AMSECO - Metropolitan Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 5 AMSECO - 6466 Option Option Option Option $1,426.00Passenger Seat Options 6 AMSECO - 6566 Option Option Option Option $4,189.00Passenger Seat Options 7 AMSECO - 2005/6466 Suburbans Option Option Option Option $2,254.00Passenger Seat Options 8 AMSECO Vision Option Option Option Option $1,236.00Passenger Seat Options 9 AMSECO - Innovator 850 Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 10 AMSECO - Premier Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 11 AMSECO - 2000 Series Recliners Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 12 AMSECO - VR50 Seat Inserts Standard Standard Standard Standard IncludedPassenger Seat Options 13 AMSECO - CR50 Seat Inserts Option Option Option Option $1,778.00 Passenger Seat Options 14 4 One - Angel Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 15 4 One Aries Option Option Option Option $4,595.00 Passenger Seat Options 16 4 One Brasil Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 17 4 One - Citiseat Option Option Option Option $667.00Passenger Seat Options 18 4 One - Citipro Option Option Option Option $3,826.00 Passenger Seat Options 19 4 One - Diablo Option Option Option Option $8,021.00 Passenger Seat Options 20 4 One - Patriot Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 21 4 One Gemini Seating Option Option Option Option $561.00Passenger Seat Options 22 4 One Torino G Option Option Option Option QUOTEPassenger Seat Options 23 Kiel Ideo Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 24 Kiel Esos Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 25 Add (3) Passenger Seats to Curbside Wheelwell Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 26 Add (2) Passenger Seats to Curbside Wheelwell Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 27 Hinged Rear Settee Option Option Option Option $220.00Passenger Seat Options 28 110 v outlets with USB charging throughout seating layout Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 29 Dual USB charging station throughout seating layout Option Option Option Option $1,700.00 Passenger Seat Options 30 Cup holders for each seat (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 31 Self-storing footrests for each seat (available on select seats only) Option Option Option Option QUOTE DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Passenger Seat Options 32 Expanding mesh magazine holder on seat back (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 33 Three (3) point passenger restraint belts for each seat (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 34 Kiel Citos Option Option Option Option $2,511.00 Passenger Seat Options 35 AMSECO - Insight Prime Option Option Option Option ($1,004.00) Passenger Seat Options 36 AMSECO - Insight Prime+ Option Option Option Option ($503.00) Trolley Styling Package
Trolley Styling Package 1 Classic San Francisco Option Not Applicable Option Not Applicable $75,994.00Trolley Styling Package 1.1 Wood Seats Option Not Applicable Option Not Applicable $15,141.00 Trolley Styling Package 1.2 Wood Trimmed Drivers Barrier Option Not Applicable Option Not Applicable $400.00 Trolley Styling Package 1.3 Wood Trimmed Electrical Box Option Not Applicable Option Not Applicable $400.00 Trolley Styling Package 1.4 Brass Powder coated Stanchions & Grab Rails Option Not Applicable Option Not Applicable $600.00Trolley Styling Package 2 Add Vinyl Seat Cushions Option Not Applicable Option Not Applicable $4,281.00Trolley Styling Package 3 Add Cow Catcher Option Not Applicable Option Not Applicable $3,349.00Trolley Styling Package 4 Add Rope lights Option Not Applicable Option Not Applicable $3,474.00Trolley Styling Package 5 Add Vintage Style Graphics Package Option Not Applicable Option Not Applicable IncludedTrolley Styling Package 6 Add for Hybrid Roof Compatibility Option Not Applicable Option Not Applicable $8,869.00Trolley Styling Package 7 2 Color Custom Paint for Trolley Option Not Applicable Option Not Applicable IncludedTrolley Styling Package 8 Brown Leather Overhead Grab Straps - Each Option Not Applicable Option Not Applicable $30.00 Category Item # Description Designation Propulsion (if applicable) Price Air
Air 1 Shop Air Connection (Milton S790) Standard IncludedAir 2 Bendix AD9, (300 ci Purge) Not Applicable NAAir 3 Bendix Adip, Heated Option $673.00 Air 4 Bendix Puraguard Air/Oil Separator Option $486.00 Air 5 Wabco SS 1800 Air Dryer, Heated Option $543.00 Air 6 Chicago Rawhide T2000 Not Applicable NAAir 7 Chicago Rawhide Dual Turbo 2000 Standard IncludedAir 8 Graham White QBA 15 "Sludge Buster", Heated Option $675.00 Air 9 Kingston Auto Drain Valve At Ping Tank Standard IncludedAir 10 Terminate Kneeling Operation Sensor Standard IncludedAir 11 Wabco 37.4 cfm twin cylinder air compressor (ISB 6.7 engine only) Standard Included Other Option - Specify
Body- Bike Rack
Body – Bike Rack 1 Sportworks Apex 3 - 3 Position Bike, Stainless Steel Not Applicable NABody – Bike Rack 2 Sportworks - 2 Position Bike, Black Powder Coated Option $499.00 Body – Bike Rack 3 Sportworks - 2 Position Bike, Stainless Steel Option $778.00 Body – Bike Rack 4 Sportworks - 3 Position Bike, Black Powder Coated Not Applicable NABody – Bike Rack 5 Sportworks - Trilogy 3 Position Bike, Stainless Steel Not Applicable NABody – Bike Rack 6 Midwest Bus - BYK RYK (Stainless Steel) Option $806.00 Body – Bike Rack 7 Bike Rack Deployed Lamp on Dash Option $200.00 Body – Bike Rack 8 Bike Rack 5" Spot Mirror Option $36.00 Body – Bike Rack 9 Bike Rack Mounted Advertising Frame, 14"X 44" Option $306.00 Body – Bike Rack 10 Sportworks - Mounting Bracket Only Standard Included Body - Driver's
Barrier
Body – Driver's Barrier 1 Wrap Around Fiberglass with Schedule Rack Cutouts Option $61.00 Body – Driver's Barrier 2 Wrap Around Fiberglass W/O Schedule Rack Cutouts Standard IncludedBody – Driver's Barrier 3 Plexiglass Drivers Security Enclosure Option $875.00 Body – Driver's Barrier 4 Flat Melamine, Two Piece Not Applicable NA All options listed below are the same for each bus length worksheet.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Driver's Barrier 5 Flat Melamine, Two Piece, w/(4) Schedule Holders Not Applicable NA Body – Driver's Barrier 6 Plexiglass Drivers Security Enclosure, two pieces Not Applicable NABody – Driver's Barrier 7 ArowGuard Driver Protection Shield w/Standard Glass Option $4,988.00 Body – Driver's Barrier 8 ArowGuard Driver Protection Shield w/extended Glass Option $5,240.00 Body - Driver'Seat
Body – Driver Seat 1 Recaro Ergo Metro w/Fabric Seat and Back w/Gray Fabric Boxing Standard IncludedBody – Driver Seat 2 Recaro MCII Option $469.00 Body – Driver Seat 3 USSC 9100 ALX w/Fabric Seat and Back w/Gray Fabric Boxing Option $60.00 Body – Driver Seat 4 USSC 9100 ALX - 3 w/Fabric Seat and Back w/Gray Fabric Boxing Option $335.00 Body – Driver Seat 5 Add Headrest (USSC) Option $44.00 Body – Driver Seat 6 Add Arm Rest (Right Side Only, USSC) Option $169.00 Body – Driver Seat 7 Add Shoulder Belt (Recaro) Option $263.00 Body – Driver Seat 8 Add 3 -Point, Horizontally Adjustable D - Loop (Recaro) Option $250.00 Body – Driver Seat 9 Driver’s Seat Vacancy Alarm Option $134.00 Body – Driver Seat 10 Safety Orange Shoulder Belt (US SC ALX) Option $150.00 Body – Driver Seat 11 Silicon Foam At Lower Seat Cushion (USSC) Option $1,013.00 Body – Driver Seat 12 Holdsworth Fabric Option $319.00 Body – Driver Seat 13 FR Treated Foam (Recaro) Option $306.00 Body – Driver Seat 14 USSC Q90 ALX Option $438.00 Body – Driver Seat 15 USSC G2A -2pt Drivers Seat (includes headrest) Option $494.00 Body – Driver Seat 16 Recaro M384 Seat Option $163.00 Body – Driver Seat 17 Add Headrest (Recaro) Standard IncludedBody – Driver Seat 18 Add Armrest (per side, Recaro) Option $169.00 Body – Driver Seat 19 Ready Reach Adjustable D - Loop (USSC) Option $175.00 Body – Driver Seat 20 Full Docket 90 FR Seat (USSC) Option $1,163.00 Body – Driver Seat 21 Add Liquicell Seat Cushion (Recaro) Option $131.00 Body – Driver Seat 22 Add Heated Seat Feature (Recaro) Option $250.00 Body – Driver Seat 23 Add Drivers Seat Belt Alarm Option $134.00 Other Option - Specify
Body - Exit Door
Body – Exit Door 1 Standard Melamine Panels on Lower Section Both Sides of Rear Exit Door Standard Included Body – Exit Door 2 Upper Clear Plexiglas Modesty Panels Both Sides of Rear Exit Door (each) Option $220.00 Body - Exit Door 3 Accelerator Interlock when doors are open Standard Included Other Option - Specify
Body - Floor Covering
Body – Floor Covering 1 Greenwood ACQ Plywood W/RCA Rubber Deduction ($400.00)Body – Floor Covering 2 Altro Meta/Chroma Transfloor Standard IncludedBody – Floor Covering 3 Altro wood safety (vinyl simulated woodgrain) Option $0.00 Body – Floor Covering 4 Gerflor Tarabus Gaya Wood (vinyl simulated woodgrain) Option $350.00 Body – Floor Covering 5 Composite Sub Floor Option $2,200.00 Body – Floor Covering 6 Rear Seat Riser for Forward Facing Seats Standard IncludedBody – Floor Covering 7 Front Seat Risersor for Forward Facing Seats (Each Side) Option $1,100.00 Body – Floor Covering 8 Pressure-preservative treated plywood Standard IncludedBody – Floor Covering 9 Gerflor Terabus Sirius/Helios Option $350.00 Other Option - Specify
Body - Mirror,
Exterior
Body – Mirror, Exterior 1 Safe Fleet One Piece 8" x 8" Flat Glazing W/Stainless Steel Arms, Remote Both Sides Standard Included Body – Mirror, Exterior 2 Safe Fleet One Piece 8" x 8" Flat Glazing W/S.S. Arms, Manual W/6" Spot Mirror Option $82.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Mirror, Exterior 3 Safe Fleet 8" x 15" 2 Piece, Heated, Remote Both Sides Option $110.00 Body – Mirror, Exterior 4 Safe Fleet 9" x 11" 2 Piece, Heated, Remote Both Sides Not Applicable NABody – Mirror, Exterior 5 Safe Fleet 9" x 13" Class "A" 2 Piece, Heated, Remote Both Sides Option $349.00 Body – Mirror, Exterior 6 Safe Fleet 10" x 13:", 2 Piece (Flat & Convex), Heated, Remote Both Sides Option $49.00 Body – Mirror, Exterior 7 Safe Fleet 10" x 11 " 1 Piece, Heated, Remote Both Sides Option $0.00 Body – Mirror, Exterior 8 Rosco 8" x 15" 1 Piece, Heated Remote Both Sides Deduction ($60.00)Body – Mirror, Exterior 9 Lucerix Metagal 7" x 15" 2 Piece, Heated Remote Both Sides Option $210.00 Body – Mirror, Exterior 10 Velvac View-All System (Camera Mounted in Exterior Mirror W/LCD Screen in Driver Area) Not Applicable NA Body – Mirror, Exterior 11 Velvac Hyperion Lane Change Guardian Not Applicable NA Other Option - Specify
Body - Mirror,
Interior
Body – Mirror, Interior 1 Mirror - 8 1/2 " X 16" Standard IncludedBody – Mirror, Interior 2 Mirror - 4.75" X 15" Option $0.00 Body – Mirror, Interior 3 Mirror - Front Door 6" Round on Header Door Standard IncludedBody – Mirror, Interior 4 Mirror - Rear Exit Door/Step Well 12" Convex Standard IncludedBody – Mirror, Interior 5 Mirror - 8 1/2 " X 1" center Not Applicable NABody – Mirror, Interior 6 Mirror - 5" flat Option $36.00 Other Option - Specify
Body - Paint & Decal
Body – Paint & Decal 1 One Color w/Roof Numbers Standard IncludedBody – Paint & Decal 2 (2) Colors, with and without Black Mask At Windows Option $2,150.00 Body – Paint & Decal 3 (3) Colors, with and without Black Mask At Windows Option $4,300.00 Body – Paint & Decal 4 Basic Decal Package (Up to Three Strips and Equivalent Design) Option QuoteBody – Paint & Decal 5 Custom Paint/Decal Design (Per Purchasers' Spec) Option QuoteBody – Paint & Decal 6 Clear Coat Complete Bus Not Applicable NABody – Paint & Decal 7 Remove Roof Numbers Deduction ($75.00)Body – Paint & Decal 8 Add Clear Coat (per Paint Pass) Option $450.00 Body - Passenger
Signal
Body – Passenger Signal 1 Pullcords - Above Windows (Neutral Or Yellow) w/Touch Pad At W/C Positions Standard IncludedBody – Passenger Signal 2 Touch Tape (At Window Mullions) Option $1,116.00 Body – Passenger Signal 3 Button at Exit Door Vertical Stanchion Option $68.00 Body – Passenger Signal 4 Additional Amber Stop Request Lamp Mounted on Driver's Dash Option $38.00 Body – Passenger Signal 5 Button in the Parcel Rack Not Applicable NA Other Option - Specify
Body - Rear Door
Body – Rear Door 1 34" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) Standard IncludedBody – Rear Door 2 48" Wide Rear Door w/Full Driver Control (Air Open/Air Close) Option $2,821.00 Body – Rear Door 3 56" Wide Rear Door w/Full Driver Control (Air Open/Air Close) Option $2,821.00 Body – Rear Door 4 Electric Operated Front/Rear Door Motor and Control Option $4,012.00 Body – Rear Door 5 Passenger Open (Push Open/Spring Close) Not Applicable NABody – Rear Door 6 Touch Bars (Air Open/Spring Close) Option $553.00 Body – Rear Door 7 Touch Bars w/Driver Override Option $553.00 Body – Rear Door 8 Touch Tape in Place of Touch Bars Not Applicable NABody – Rear Door 9 Vapor Class Acoustic (Photo Sensor) Option $3,292.00 Body – Rear Door 10 Vapor V Touch (Electronic Touch Bar) Option $553.00 Body – Rear Door 11 Vapor Electric Transit Operator Not Applicable NABody – Rear Door 12 Vapor Electric Door Control / 1939 Interface Option $575.00 Body – Rear Door 13 Vapor Optical Pressure Wave Switch Option $350.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Rear Door 14 Exterior Air Release (Front Door Control Valve) Option $162.00 Body – Rear Door 15 Driver Push Button Door Controls Option $220.00 Body – Rear Door 16 Bode CADS All electric doors Not Applicable NABody – Rear Door 17 Remove Rear Door, Add Two Seats Deduction ($1,300.00)Body – Rear Door 18 Ventura electric rear door Not Applicable NABody – Rear Door 19 Add Center Door (Articulated bus only) Not Applicable NA Other Option - Specify
Body - Roof Hatch
Body – Roof Hatch 1 Manual Hatch At Front and Rear Positions Option $317.00 Body – Roof Hatch 2 One (1) Roof Hatch Position - Rear Standard IncludedBody – Roof Hatch 3 Electric Hatch with Driver Control (per Position) Option $494.00 Body – Roof Hatch 4 Glass Hatch in Lieu of Standard Option $103.00 Body – Roof Hatch 5 Additional Roof Hatch Position Option $317.00 Other Option - Specify
Body - Schedule Rack
Body – Schedule Rack 1 none Standard IncludedBody – Schedule Rack 2 Innocom Schedule Racks 3.75" x 7" x 1.5" Option $18.00 Body – Schedule Rack 3 Innocom Schedule Racks 8.62" x 1 1" x 1" Option $36.00 Body – Schedule Rack 4 22" x 21" Black, RH Load Open Back Option $180.00 Body – Schedule Rack 5 Transit Information Products - 19" x 21" OBIC 19/214P1LTRMC Option $265.00 Body – Schedule Rack 6 Transit Information Products - 19" x 21" OBICT10P2LTRMC Option $480.00 Other Option - Specify
Body -
Stanchions/Grab Rails
Body – Stanchions/Grab
Rails 1 Stainless Steel Stanchions and Grab Rails and Modesty Panel Tubes Option $0.00 Body – Stanchions/Grab
Rails 2 Powder Coated Vertical Stanchions, Grab Rails and Modesty Panel Tubes Standard Included Body – Stanchions/Grab
Rails 3 Powder Coated Vertical Stanchions only Option $0.00 Body – Stanchions/Grab
Rails 4 Farebox Guard Rail Standard Included
Body – Stanchions/Grab
Rails 5 Grab Rail Forward Wheel Housing Option $50.00
Body – Stanchions/Grab
Rails 6 Luggage Rack 68", Two -Tier with Fixed Shelf's Option $3,566.00 Body – Stanchions/Grab
Rails 7 Vinyl Coated Nylon Grab Straps (Cost per Handle) Option $25.00 Body – Stanchions/Grab
Rails 8 SSTL Spring Loaded Grab Handle (Cost per Handle) Option $123.00 Body – Stanchions/Grab
Rails 9 non-vinyl-coated nylon grab straps (per handle, color to be chosen by agency) Option $25.00 Other Option - Specify
Cooling System
Cooling System 1 Modine Side By Side By Side Plate Fin Radiator Not Applicable NACooling System 2 Modine Electric Cooling Fan System Standard IncludedCooling System 3 EMP Electric Cooling Fan System Option $1,256.00 Cooling System 4 Electric Fan Cooling System (Non EMP - Specify OEM) Not Applicable NACooling System 5 Grayson Electric Cooling Fan System Not Applicable NACooling System 6 Hydraulic Cooling Fan Not Applicable NACooling System 7 L&M Radiator Not Applicable NACooling System 8 Masabi Radiator Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Cooling System 9 E - Coat Radiator, CAC & Hydraulic Cooler Not Applicable NA Cooling System 10 Radiator Tank Guard Option $272.00 Cooling System 11 Double Breeze Constant Tension Clamps Option $125.00 Cooling System 12 Oetiker Constant Torque Clamps Standard IncludedCooling System 13 Gates - Greenstripe Hose Option $198.00 Cooling System 14 Webasto Model Thermo 300 ( 104,000 btu ) Coolant Heater Not Applicable NACooling System 15 Webasto Model Thermo 230 ( 80,000 btu ) Coolant Heater Not Applicable NACooling System 16 Proheat Model X120 (120,000 btu) Coolant Heater Not Applicable NACooling System 17 Proheat Model X80 ( 80,000 btu ) Coolant Heater Not Applicable NACooling System 18 Proheat Model X50 ( 50,000 btu ) Coolant Heater Not Applicable NACooling System 19 Proheat Model X45 ( 45,000 btu ) Coolant Heater Not Applicable NACooling System 20 Electric Coolant Auxiliary Heater Not Applicable NACooling System 21 Espar Model Hydronic #4 Not Applicable NACooling System 22 Espar Model Hydronic #5 Not Applicable NACooling System 23 Articulated Only? Not Applicable NACooling System 24 EMP Electric Cooling Fan System Not Applicable NACooling System 25 Electric Fan Cooling System (Non EMP - Specify OEM) Not Applicable NACooling System 26 Double Breeze Constant Tension Clamps Not Applicable NACooling System 27 Oetiker Constant Torque Clamps Not Applicable NACooling System 28 Grayson Electric Cooling Fan System Not Applicable NACooling System 29 Valeo (formerly Webasto) Thermo Plus 300 Option $2,967.00 Cooling System 30 Valeo (formerly Webasto) Thermo Plus 230 Option $2,696.00 Cooling System 31 Proheat Model X30 Coolant Heater Option $2,596.00 Cooling System 32 Proheat Model M50 Coolant Heater Option $2,796.00 Cooling System 33 E - Coat Radiator, CAC & Hydraulic Cooler (DIESEL OR CNG) OPTION $904.00 Cooling System 34 E - Coat Radiator, CAC & Hydraulic Cooler (HYBRID) OPTION $1,485.00 Electrical
Electrical 1 Voltage Spike Arrestor, S.K.I. Products SKI241 -101445, or Approved Equal Not Applicable NAElectrical 2 24 Volt to 13.6 Volt DC - DC Converter, 30 Ampere Output, Model 1645 - 24 - 12 - 30, Manufactured By Wilmore Electronics Co., Inc. or Equivalent Not Applicable NA Electrical 3 Battery Voltage Equalizer Standard IncludedElectrical 4 24V battery isolation system (keeps house batteries from being drained by cameras, recorders, etc.) Not Applicable NA Other Option - Specify
Electrical -
Accessories
Electrical – Accessories 1 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Drivers Area Option $75.00 Electrical – Accessories 2 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Rear Air Return Grille Area Option $75.00
Other Option - Specify
Electrical - Alternator
Not for Electric
Electrical – Alternator 1 Delco 50 DN (270 AMP) Not Applicable NAElectrical – Alternator 3 Penntex Px833 Alternator Not ApplicableElectrical – Alternator 4 Neihoff C - 701 (300 AMP) Not Applicable NAElectrical – Alternator 5 Neihoff C - 703 (330 AMP) Not Applicable NAElectrical – Alternator 6 Neihoff C - 803 (500 AMP) Air Cooled Standard IncludedElectrical – Alternator 7 EMP POWER 450 AMP Brushless Alternator Option $0.00 Electrical – Alternator 8 KA500 HIPRO (KHP 500-000) (475 AMP) Not Applicable NAElectrical – Alternator 9 Marine Cabling for Charging System Option $893.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify
Electrical - Automatic
Passenger Counter
Electrical – Automatic
Passenger Counter
1 none Standard Included
Electrical – Automatic
Passenger Counter 2 UTA Automatic Passenger Counter System with GPS, WLAN Capabilities Option $5,709.00 Electrical – Automatic
Passenger Counter 3 UTA APC Sensors, Cabling, CPU only Option $1,800.00 Electrical – Automatic
Passenger Counter 4 Wiring provisions IAW APC manufacture Not Applicable NA Electrical – Automatic
Passenger Counter 5 Strategic Mapping APC system Not Applicable NA Electrical – Automatic
Passenger Counter
6 UTA Driver Seat Occupancy Monitor Option $327.00
Electrical – Automatic
Passenger Counter 7 UTA Multi-Slot Bike Rack Monitoring Option $533.00 Other Option - Specify
Electrical - Auxiliary
Lights
Electrical – Auxiliary Lights 1 Four (4) 4" Diameter LED Auxiliary Brake Lights Option $100.00 Electrical – Auxiliary Lights 2 Two (2) 4" Diameter LED Auxiliary Brake Lights Standard Included Electrical – Auxiliary Lights 3 Two (2) Dialight 7" Diameter LED Auxiliary Brake Lights Option $0.00 Electrical – Auxiliary Lights 4 4 LED Brake Strip Lamps Option $300.00 Electrical – Auxiliary Lights 5 JKA Enterprises LED "Stop" Light Option $470.00 Electrical – Auxiliary Lights 6 Exterior Curb Lamps, Front & Rear - Dialight Standard Included Electrical – Auxiliary Lights 7 Triangle Amber LED Yield Sign - Dialight Option $640.00 Electrical – Auxiliary Lights 8 Two (2) Red LED Brake Strip Lamps Option $100.00 Electrical – Auxiliary Lights 9 Remove LED Auxiliary Brake Lights (DEDUCT) Deduction ($100.00) Electrical – Auxiliary Lights 10 Overhead Farebox LED - Light W/Night - Day Switch (on Drivers Side Panel) - Light Illuminates W/Frt. Door Open and Switch in the Night Position Option $88.00 Electrical – Auxiliary Lights 11 Service Compartment Lights - LED Standard IncludedElectrical – Auxiliary Lights 12 LED Beacon Light Not Applicable NA Electrical – Auxiliary Lights 13 LED Decel Lights (2) - Non - Flashing only (Per NHTSA) Option $200.00 Other Option - Specify
Electrical - Battery &
Battery Chargers
Electrical - Battery & Battery
Chargers 1 Polyethylene battery tray and enclosure Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Battery & Battery
Chargers 2 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) Standard Diesel Only Included Electrical – Battery & Battery
Chargers 3 (4) DEKA Group 32 Top Post OPTION $223.00
Electrical – Battery & Battery
Chargers 4 DEKA AGM Type 8D/Group 32 Option $511.00
Electrical – Battery & Battery
Chargers 5 (4) Odyssey Group 32 Standard CNG & Hybrid Included Electrical – Battery & Battery
Chargers 6 (4) Trojan Group 32 Not Applicable NA
Electrical – Battery & Battery
Chargers 7 Ultra Capacitors - KBI KAPower Option $3,818.00 Electrical – Battery & Battery
Chargers 8 Anderson 350 Jump Start Connector Located in Battery Compartment Option $95.00 Electrical – Battery & Battery
Chargers 9 Remove Anderson 350 Jump Start (Located in engine comparment) Deduction ($140.00) Electrical – Battery & Battery
Chargers 10 En-route Battery Charging system (ABB HVC-450PD Pantograph, 450kW) ***Subject to production availability*** Option (electric only) $436,732.00 Electrical – Battery & Battery
Chargers 11 Inductive charging system for depot charging See item 24 below (electric only) See item 24 below Electrical – Battery & Battery
Chargers 12 Cable "Pigtail" Chargers Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 13 Battery Chargers Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 14 60 kW Charger and Dispenser (ChargePoint CPE250, 62.5kW) ***Subject to production availability*** Option (electric only) $60,919.00 Electrical – Battery & Battery
Chargers 15 80 kW Charger and Dispenser Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 16 100 kW Charger and Dispenser (ABB HVC-100 Depot, 100kW) ***Subject to production availability*** Option (electric only) $118,484.00 Electrical – Battery & Battery
Chargers 17 125 kW Charger and Dispenser (ChargePoint CPE250, 125kW) ***Subject to production availability*** Option (electric only) $113,238.00 Electrical – Battery & Battery
Chargers 18 250 kW Inductive Charging In Route Pad Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 19 250 kW Inductive Charging On-Board Receiver Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 20 350 kW on-route Charger Not Applicable (electric only) NA Electrical - Battery & Battery
Chargers 21 Wave Wireless Inductive chargin Equipment In Route Pad Not Applicable (electric only) NA Electrical - Battery & Battery
Chargers 22 Wave Wireless Inductive Charging Equipment Depot Level Pad Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 23 Momentum Dynamics Wireless Inductive Charging Equipment In Route Pad ***Subject to production availability*** Option (electric only) 75 kW: $74,206 150 kW: $144,412 300 kW: $259,295 Electrical – Battery & Battery
Chargers 24 Momentum Dynamics Wireless Inductive Charging Equipment Depot Level Pad ***Subject to production availability*** Option (electric only) 75 kW: $74,206 150 kW: $144,412 300 kW: $259,295 Electrical – Battery & Battery
Chargers 25 Momentum Dynamics Wireless Inductive Charging Equipment On Bus Receiver ***Subject to production availability*** Option (electric only) 75 kW: $37,300 150 kW: $52,150 300 kW: $79,150 Electrical – Battery & Battery
Chargers 26
Momentum Dynamics/Princeton power Wayside Battery storage-one megawatt with optional 500 kW
***Subject to production availability***
Not Applicable (electric only) NA
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Battery & Battery
Chargers 27 Electrical Management Software from Viriciti Not Applicable (electric only) NA 28 Energy Storage System = Battery Packs Not Applicable NA Electrical – Battery & Battery
Chargers 29 260 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 30 320 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 31 440 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 32 500 KWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 33 660 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 34 800 kWh Not Applicable (electric only) NA
Electrical - Battery & Battery
Chargers 35 Electric Trolley Bus Package Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 36 150 kW Charger and Dispenser (ChargePoint PowerBlock, 150kW) ***Subject to production availability*** Option (electric only) $118,716.00 Electrical – Battery & Battery
Chargers 37 150 kW Charger and Dispenser (ABB HVC-150 Depot, 150kW) ***Subject to production availability*** Option (electric only) $127,213.00 Electrical – Battery & Battery
Chargers 38 En-route Battery Charging system (ABB HVC-300PD Pantograph, 300kW) ***Subject to production availability*** Option (electric only) $347,385.00 Electrical - Battery & Battery
Chargers 39 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) Deduction CNG & Hybrid ($663.00) Electrical – Battery & Battery
Chargers 40 (4) Odyssey Group 32 Option Diesel Only $663.00 Electrical -
Communication/Radi
o
Electrical –
Communication/Radio 1 Pre - Wire:12V/40A Direct Battery & 12V/10A Ignition (Route to RH Dash & Ele. Equip. Box) and Install Roof Mount RF/GPS/Cellular Antenna Standard Included Electrical –
Communication/Radio 2 Motorola XLT 2500, 10- 35 W, 800MHZ W/DEC Box and Silent Alarm Switch Not Applicable NA Electrical –
Communication/Radio 3 Motorola XLT 5000 Not Applicable NA Electrical –
Communication/Radio 4 Motorola APX4500 Option $3,700.00 Electrical –
Communication/Radio 5 Motorola CM200 and CM300, 45W, 439 - 470- MHZ Option $910.00 Electrical –
Communication/Radio 6 Motorola CDM 1250 Not Applicable NA Electrical –
Communication/Radio 7 Harris Mobile XG-25M Radio Option $3,896.00 Electrical –
Communication/Radio 8 DC Power Filter for Radio Wiring Option $384.00 Electrical –
Communication/Radio 9 Hand - Held Microphone Standard Included Electrical –
Communication/Radio 10 Public Address System with Boom Mic Standard Included Electrical –
Communication/Radio 11 Additional Flush Mounted Speakers (per Pair) Option $120.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical –
Communication/Radio 12 ASP930T Radio Antenna with RG58 Coax Cable and TNC Connector Option $130.00 Electrical –
Communication/Radio 13 Antenna Specialist ASP- 572 Option $130.00 Electrical –
Communication/Radio 14 Customer Specified Two Way Radio and Installation Option Quote Electrical –
Communication/Radio 15 GPS Antenna W/Gasket (Trimble 502 Model 18334 and Approved Equal) with RG58 Coax Cable and F Type Male Connector to the VLU Option $547.00 Electrical –
Communication/Radio 16 customer specific antenna, ground plane, and cable runs installation Option Quote Electrical –
Communication/Radio 17 Motorola APX4500 (Wifi capable version) Option $4,613.00 Electrical –
Communication/Radio 18 Motorola APX6500 Option $4,799.00 Electrical –
Communication/Radio 19 Motorola APX6500 (Wifi capable version) Option $5,985.00 Electrical –
Communication/Radio 20 Motorola XPR5550e Option $1,660.00 Electrical –
Communication/Radio 21 Harris Mobile XG-75M Radio Option $4,730.00 Electrical –
Communication/Radio 22 Harris Mobile XL-185M Radio Option $7,158.00 Other Option - Specify
Electrical -
Destination Sign
Electrical – Destination Sign 1 Twin Vision Silver Series Sign (16 X160) Front & Side Deduction ($360.00)Electrical – Destination Sign 2 Twin Vision Silver Series Sign (24 X 200) Front & Side Option $298.00 Electrical – Destination Sign 3 Twin Vision Smart Series II (16 X160) Front & Side Not Applicable NAElectrical – Destination Sign 4 Twin Vision Smart Series II (24 X 200) Front & Side Not Applicable NAElectrical – Destination Sign 5 Twin Vision 100% Amber LED, Front, Curb Side, Rear Standard Included Electrical – Destination Sign 6 Twin Vision 100% Amber LED, Rear Standard Included Electrical – Destination Sign 7 Twin Vision Chroma I Color LED Front Not Applicable NA Electrical – Destination Sign 8 Twin Vision Chroma IV 100% Color LED Not Applicable NAElectrical – Destination Sign 9 Twin Vision 24 X 200 Front Amber LED Sign Option $540.00 Electrical – Destination Sign 10 Luminator SMT Horizon 100% Amber LED Front, Curbside, Rear Option $0.00 Electrical – Destination Sign 11 AXION with WI FI and Time and Date Time Stamp Not Applicable NA Electrical – Destination Sign 12 Luminator Spectrum 100% Amber LED Front ,Curbside, Rear Option $7,048.00 Electrical – Destination Sign 13 Luminator White LED Front, Curb-side and Rear Option $778.00 Electrical – Destination Sign 14 Add Twin Vision Smart Series II w/ rear camera, Rear Sign Not Applicable NAElectrical – Destination Sign 15 Add Street Side Sign (Twin Vision Amber LED) Option $1,230.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Destination Sign 16 Add Street Side Sign (Twin Silver Series LED) Option $1,250.00 Electrical – Destination Sign 17 Remove Rear Sign (DEDUCT) Deduction ($700.00)Electrical – Destination Sign 18 Program Software (Twin Vision) Option $379.00 Electrical – Destination Sign 19 Luminator Programming Software USB Wireless Option $1,000.00 Electrical – Destination Sign 20 Transign Curtain Front and Side Sign Not Applicable NAElectrical – Destination Sign 21 Heated Front Sign Glazing Option $214.00 Electrical – Destination Sign 22 Transign, (4) Character, Metal Housing Standard Included Electrical – Destination Sign 23 Transign, (3) Character, Metal Housing Option $0.00 Electrical – Destination Sign 24 Transign, (2) Character, D - 1 853, Metal Housing Option $0.00 Electrical – Destination Sign 25 Twin Vision Electronic Front Dash Sign Option $750.00 Electrical – Destination Sign 26 Hanover Display LED Amber Destination Signs (model# OL028, OL054 & OL64J, Front, Side & Rear) Option $231.00 Electrical – Destination Sign 27 Luminator Electronic Front Dash Sign Option $750.00 Electrical – Destination Sign 28 I/O controls Destination sign Amber (Front, Side & Rear & Dash) Option $1,125.00 Electrical – Destination Sign 29 DELETE Twin Vision Rear Sign Deduction ($700.00) Electrical – Destination Sign 30 ADD Twin Vision Rear Sign with built in Camera Option $1,250.00 Electrical – Destination Sign 31 Hanover Amber Front Sign size 200x24 (price on top of Hanover option) Option $719.00 Electrical – Destination Sign 32 Hanover dash sign Option $688.00 Electrical – Destination Sign 33 DELETE Transign, (4) Character, Metal Housing Deduction ($475.00) Electrical – Destination Sign 34 I/O controls Destination sign White LED (Front, Side & Rear & Dash) Option $1,606.00 Electrical -
Destination Sign
Programming
Electrical – Destination Sign
Programming 1 Luminator USB & Integrated Programing Software Option $414.00 Electrical – Destination Sign
Programming 2 Twin Vision Elyse 2 USB Option $350.00
Electrical – Destination Sign
Programming 3 Twin Vision Software Package Option $64.00 Other Option - Specify
Electrical -
Diagnostics
Electrical – Diagnostics 1 Set of Multiplexing Diagnostics (Includes the 7 Following Items) Option $8,893.00 Electrical – Diagnostics 2 Incl w/set - Circuit Tester Incl with setElectrical – Diagnostics 3 Incl w/set - Program Loader Incl with setElectrical – Diagnostics 4 Incl w/set - Program Incl with set DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Diagnostics 5 Incl w/set - ID Writer/Verification Incl with set Electrical – Diagnostics 6 Incl w/set - RS232/RS485 Converter Incl with setElectrical – Diagnostics 7 Incl w/set - Software, Real Time Ladder Logic Incl with setElectrical – Diagnostics 8 Incl w/set - Hand - Held Computer Incl with set Other Option - Specify
Electrical - Equipment
Storage Box
Electrical – Equipment
Storage Box
1 none Deduction ($400.00)
Electrical – Equipment
Storage Box 2 UTA APC Sensors, Cabling, CPU only Option $1,800.00 Electrical – Equipment
Storage Box 3 33"H X 20"D X 22.5"W, 13 - 42920F006 Not Applicable NA Electrical – Equipment
Storage Box 4 33"H X 20"D X 22.5"W, 13 - 42920F006, w/2 - Doors Not Applicable NA Electrical – Equipment
Storage Box 5 33"H X 20"D X 22.5"W, 13 - 42920F014, w/Louvered Back Panel Not Applicable NA Electrical – Equipment
Storage Box 6 Strategic Mapping sensors, cabling, CPU only Not Applicable NA Electrical – Equipment
Storage Box
7 44"H X 20"D X 22.5"W Standard Included
Electrical – Equipment
Storage Box 8 44"H X 20"D X 22.5"W, w/2- doors Option $130.00 Other Option - Specify
Electrical - Lights,
Exterior
Electrical – Lights, Exterior 1 All Exterior Lights LED - Type Lamps Standard IncludedElectrical – Lights, Exterior 2 Headlight LED Dialight - Low Beam only Deduction ($250.00)Electrical – Lights, Exterior 3 Headlight LED Dialight - High Beam only Deduction ($250.00)Electrical – Lights, Exterior 4 Halogen Sealed Beam Headlights Deduction ($500.00) Electrical – Lights, Exterior 5 Tail Lights - Manufacturer Dialite LED, Fixture Size - 7" Diameter Option $90.00 Electrical – Lights, Exterior 6 Tail Lights - Manufacturer Dialite LED, Fixture Size - 4" Diameter Standard Included Other Option - Specify
Electrical - Intelligent
Vehicle Network
Electrical – Intelligent
Vehicle Network 1 none Standard Included
Electrical – Intelligent
Vehicle Network 2 Clever Devices IVN III W/Voice Annunciation, APC, Wireless LAN Option Quote Electrical – Intelligent
Vehicle Network 3 AVAIL IVN W/MDC, GPS, APC, WLAN Option Quote Electrical – Intelligent
Vehicle Network 4 Init Voice Enunciator/AVL/GPS/APC/WLAN Option Quote Electrical – Intelligent
Vehicle Network 5 Siemens Transit Master Option Quote
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Intelligent
Vehicle Network 6 Transloc Transit Visualization System AVL Option Quote Electrical – Intelligent
Vehicle Network 7 Orbital TMS CAD/AVL System W/Voice Annunciation, APC Option Quote Electrical – Intelligent
Vehicle Network 8 Intelligent Vehicle System Prewire only Option Quote Electrical – Intelligent
Vehicle Network 9 Mapping and Database Setup for GPS per Customer Requirement Option Quote Electrical – Intelligent
Vehicle Network 10 Trimble "Button" Antenna Option $130.00 Electrical – Intelligent
Vehicle Network 11 Low Profile Blade Antenna Option $130.00 Electrical – Intelligent
Vehicle Network 12 Strategic Mapping IVN Option Quote
Electrical – Intelligent
Vehicle Network 13 Complete INIT on-board ITS system, CoPilot PC, APC, CAD/AVL, Visual/Voice Stop Enunciator, Emergency button Option Quote Other Option - Specify
Electrical -
Multiplexing
Electrical – Multiplexing 1 Dinex, I/O Controls G3 System Not Applicable NAElectrical – Multiplexing 2 I/O Controls Wireless RF Module Option $1,199.00 Electrical – Multiplexing 3 I/O Controls, Gateway Module (Included in the ITS Prewire Option) Option QuoteElectrical – Multiplexing 4 Vansco Not Applicable NAElectrical – Multiplexing 5 VDO Not Applicable NAElectrical – Multiplexing 6 Dinex, I/O Controls G4 System Standard Included Electrical - Pleasure
Electrical – Pleasure 1 none Standard IncludedElectrical – Pleasure 2 Radio Tacho Link Event Data Recorder Option $8,030.00 Electrical – Pleasure 3 Radio Not Applicable NAElectrical – Pleasure 4 Radio Am/FM/CD Option $380.00 Electrical - Pleasure 5 On-Board entertainment system including 6 video screen DVD CD-ROM player Not Applicable NAElectrical - Pleasure 6 On-Board entertainment system including 2 video screen DVD CD-ROM player Option $8,680.00 Other Option - Specify
Electrical - Public
Announcement
Electrical – Public
Announcement 1 Drivers Speaker W/Separate Volume Control Option $80.00 Electrical – Public
Announcement 2 REI Model 750040 PA W/Handheld Mic W/(6) Flush Mounted Speakers Option $0.00 Electrical – Public
Announcement 3 Luminator IVS W/GPS Capability, w/LED Sign, W/O Mapping Not Applicable NA Electrical – Public
Announcement 4 DR700 Vehicle Logic Unit W/GPS Capability, w/LED Sign, W/O Mapping Option Quote Electrical – Public
Announcement 5 Clever Devises - Speakeasy II Option $2,330.00 Electrical – Public
Announcement 6 Rei Echo PA System Not Applicable NA
Electrical – Public
Announcement 7 Shure Brothers Lapel Microphone w/REI PA System Option $220.00 Electrical – Public
Announcement 8 Midwest Lapel Microphone (Use w/Voice Annunciation System) Option Quote DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Public
Announcement 9 Interior LED Sign (part of ITS/AVA system Option Quote Electrical – Public
Announcement 10 One Additional Pair of Interior Speakers Option $100.00 Electrical – Public
Announcement 11 One Additional exterior Speaker Each Option $50.00 Electrical – Public
Announcement 12 REI w/switch mounted in Driver’s Area Standard Included Electrical – Public
Announcement 13 Hanover HTC AVA system including interior LED sign Option $6,533.00 Electrical - Video
Surveillance
Electrical – Video
Surveillance 1 none Base Included
Electrical – Video
Surveillance 2 Apollo RoadRunner DVR 2TB 4 Camera System w/Audio Option $4,399.00 Electrical – Video
Surveillance 3 Apollo RoadRunner DVR 2TB 8 Camera System w/Audio Option $5,575.00 Electrical – Video
Surveillance 4 Apollo RoadRunner DVR 2TB 12 Camera System w/Audio Option $7,464.00 Electrical – Video
Surveillance 5 Apollo RoadRunner DVR 2TB 16 Camera System w/Audio Option $8,547.00 Electrical – Video
Surveillance 6 Apollo RoadRunner HDR DVR 2TB 4 Camera System & Audio Option $5,512.00 Electrical – Video
Surveillance 7 Apollo RoadRunner HDR DVR 2TB 8 Camera System & Audio Option $8,547.00 Electrical – Video
Surveillance 8 Apollo RoadRunner HDR DVR 2TB 12 Camera System & Audio Option $10,939.00 Electrical – Video
Surveillance 9 Apollo RoadRunner HDR DVR 2TB 16 Camera System & Audio Option $13,783.00 Electrical – Video
Surveillance 10 Apollo Wireless Data Download capable Not Applicable NA Electrical – Video
Surveillance 11 Apollo Cellular "Live Look Through" Capable Not Applicable NA Electrical – Video
Surveillance 12 Apollo Vehicle Information Management System (ViM) Not Applicable NA Electrical – Video
Surveillance 13 Apollo video 4K DVR w/9 camera system w/ Audio Option $9,767.00 Electrical – Video
Surveillance 14 Cole Hersee 12063 Electrical Tow Connector Option $183.00 Electrical – Video
Surveillance 15 (4) Camera Pre Wire Package Option
Electrical – Video
Surveillance 16 SEON TX8 8 channel w/1 TB hard drive Not Applicable NA Electrical – Video
Surveillance 17 SEON DX-HD 13 channel w/1 TB hard drive Not Applicable NA Electrical – Video
Surveillance 18 SEON 2 TB hard drive upgrade Not Applicable NA Electrical – Video
Surveillance 19 SEON WP00AG4 Explorer DX12 and DX-HD Smart-Link 12 VDC module to DVR cable, diagnostic indicator/alarm button & harness, GPS4 receiver mount. Not Applicable NA Electrical – Video
Surveillance 20 SEON CQ903A integrated IR Dome day/Night 600TVL interior camera, audio, 2.9 mm lens. Option $251.00 Electrical – Video
Surveillance 21 SEON CA904EI Day/Night 600TVL camera, exterior (w/infrared, no audio), 3.6 mm lens. Option $251.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 22 SEON CJ904A Dome Day/Night 600TVL camera, audio, 3.6mm lens w/mount Option $371.00 Electrical – Video
Surveillance 23 SEON CHW702EJ HD progressive scan camera, 16mm lens, exterior (no audio) and APPINJ POE injector w/mount. Option $527.00 Electrical – Video
Surveillance 24 SEON SRLGA07 Smart-Reach Lite, 2.4GHz Wireless bridge w/antenna Option $629.00 Electrical – Video
Surveillance 25 SEON HDD-STB Vmax View software, docking station & handheld mouse. Option $393.00 Electrical – Video
Surveillance 26 SEON LMK LCD monitor, 5.6 inch, AC charger, battery pack Option $333.00 Electrical – Video
Surveillance 27 Safety Vision RR6000 Pro w/(4) Digital Color Cameras, 120 GB DVR, w/Audio Not Applicable NA Electrical – Video
Surveillance 28 Angel Trax - 6 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 29 Angel Trax - 8 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 30 Angel Trax - 12 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 31 Angel Trax -16 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-F- ready Not Applicable NA Electrical – Video
Surveillance 32 Angel Trax Upgrade to 1 Tb - Double Stacked 500 G HD Not Applicable NA Electrical – Video
Surveillance 33 Angel Trax Live View, Live GPS, and System Health Notification option Option $2,100.00 Electrical – Video
Surveillance 34 March Network (8) Camera System Not Applicable NA Electrical – Video
Surveillance 35 REI Bus Watch Digital Not Applicable NA Electrical – Video
Surveillance 36 TVSS Claim Safe III w/4 Digital Cameras Not Applicable NA Electrical – Video
Surveillance 37 Mobileview IV Digital, (5) Cameras, 250 GB DVR, w/Audio Not Applicable NA Electrical – Video
Surveillance 38 Mobilview PENTA DVR Not Applicable NA
Electrical – Video
Surveillance 39 Mobileview MV3000 DVR Not Applicable NA Electrical – Video
Surveillance 40 Rear View Camera System Option $1,280.00 Electrical – Video
Surveillance 41 Add Additional Color Camera Option $520.00 Electrical – Video
Surveillance 42 Central Station Mobileview (Kalatel) Not Applicable NA Electrical – Video
Surveillance 43 Verint 4 Camera System Not Applicable NA Electrical – Video
Surveillance 44 Verint 5 Camera System Not Applicable NA Electrical – Video
Surveillance 45 Video Test Kit Mobileview IV - Kalatal Not Applicable NA Electrical – Video
Surveillance 46 Desk Top Viewing Station (REI) Not Applicable NA Electrical – Video
Surveillance 47 Velvac Hyperion Virtual DVR (up to 7 camera views through dash mounted tablet) Not Applicable NA Electrical – Video
Surveillance 48 Apollo Embedded WIFI for DVR Option $424.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 49 Apollo Wireless LAN Router/Antenna Option $769.00 Electrical – Video
Surveillance 50 Apollo LTE Cellular/Wifi Router/Antenna Option $1,564.00 Electrical – Video
Surveillance 51 Additional storage 4.0TB HDD IPO 2TB Option $373.00 Electrical – Video
Surveillance 52 Additional storage 8.0TB HDD IPO 2TB Option $653.00 Electrical – Video
Surveillance 53 Additional storage 10.0TB HDD IPO 2TB Option $793.00 Electrical – Video
Surveillance 54 Apollo Monitor 8" Option $599.00
Electrical – Video
Surveillance 55 Apollo Monitor 10" Option $649.00
Electrical – Video
Surveillance 56 Apollo Monitor 15" Option $849.00
Electrical – Video
Surveillance 57 Apollo Monitor 17" Option $1,099.00
Electrical – Video
Surveillance 58 Apollo Vehicle Information Management System (ViM) Base Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 59 Apollo Vehicle Information Management System (ViM) Health Single Server License Option $5,599.00 Electrical – Video
Surveillance 60 Apollo Vehicle Information Management System (ViM) Location Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 61 Apollo Vehicle Information Management System (ViM) Smartclip Software Single Server License Option $8,399.00 Electrical – Video
Surveillance 62 Apollo Vehicle Information Management System (ViM) Streaming Video Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 63 Apollo Vehicle Information Management System (ViM) Health Single Vehicle License Option $279.00 Electrical – Video
Surveillance 64 Apollo Vehicle Information Management System (ViM) Location Single Vehicle License Option $279.00 Electrical – Video
Surveillance 65 Apollo Vehicle Information Management System (ViM) Smartclip Single Vehicle License Option $419.00 Electrical – Video
Surveillance 66 Apollo Vehicle Information Management System (ViM) Streaming Video Single Vehicle License Option $279.00 Electrical – Video
Surveillance 67 SEON TH8 8 channel w/2 TB hard drive Option $10,341.00 Electrical – Video
Surveillance 68 Angel Trax - 6 HD/IR Vulcan series 6 MDVR Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $3,513.00 Electrical – Video
Surveillance 69 Angel Trax - 8 HD/IR Vulcan NVR Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $6,646.00 Electrical – Video
Surveillance 70 Angel Trax - 12 HD/IR Vulcan Hybrid NVR-1200 Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $8,641.00 Electrical – Video
Surveillance 71 Angel Trax -16 HD/IR Vulcan Hybrid NVR-1600 Camera System - 2.0TB HD Storage with SD Card Backup and Wi-F- ready Option $11,317.00 Electrical – Video
Surveillance 72
March Networks - RideSafe GT08: 8 Standard [Analog] Definition Color Camera System, 1TB SSD,
Wireless, Accelerometer/Impact Sensor
Option $4,151.00
Electrical – Video
Surveillance 73
March Networks - RideSafe GT12: 4 High [IP] & 8 Standard [Analog] Definition Color Camera System, 2TB
SSD, Wireless, Accelerometer/Impact Sensor
Option $6,373.00
Electrical – Video
Surveillance 74
March Networks - RideSafe GT16: 8 High [IP] & 8 Standard [Analog] Definition Color Camera System, 2TB
SSD, Wireless, Accelerometer/Impact Sensor
Option $7,107.00
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 75
March Networks - RideSafe GT20: 12 High [IP] & 8 Standard [Analog] Definition Color Camera System,
2TB SSD, Wireless, Accelerometer/Impact Sensor
Option $7,813.00
Electrical – Video
Surveillance 76 March Networks - Add (1) High [IP] Definition 360 Interior Camera Option $616.00 Electrical – Video
Surveillance 77 REI Bus Watch Digital HD5-1200 12 CH WIFI GPS with 10 cameras 2.0TB HD, G- Force Sensor Option $7,941.00 Other Option - Specify
Engine - Accessories
Engine – Accessories 1 Cummins Compucheck Fittings for (Air, Oil, Fuel & Coolant Testing) Option Diesel Only $94.00 Engine – Accessories 2 Williams Controls 41 Degree Throttle Pedal Standard Diesel Only IncludedEngine – Accessories 3 Williams Controls 45 Degree Throttle Pedal Standard Diesel Only IncludedEngine – Accessories 4 Teleflex (Kongsberg) Adjustable Throttle and Brake Pedal Option Diesel Only $1,130.00 Engine – Accessories 5 STD Donaldson (RBX00- 2277) - Air Intake Restriction Standard Diesel Only IncludedEngine – Accessories 6 Ashcraft (25-1490a02L) - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 7 Filterminder # SP - 3832 - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 8 Donaldson Informer - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 9 Spin on Filters Supplied By Engine Manufacturer Standard Diesel Only IncludedEngine – Accessories 10 By Pass Filter - Spinner - Bypass Model 976 Option Diesel Only $1,010.00 Engine – Accessories 11 Sample Test Port - Titan Probalizer OD-1014 Diesel Only $60.00 Engine – Accessories 12 FEMCO Oil Drain Plug Option Diesel Only $75.00 Engine – Accessories 13 Magnetic Drain Plug Standard Diesel Only IncludedEngine – Accessories 14 Test Ports Shall Be Provided for Commonly Checked Functions on the Bus Standard Diesel Only IncludedEngine – Accessories 16 Rear Run Box Starter - Delco MT 42 - 24v Electric Standard Diesel Only IncludedEngine – Accessories 17 Rear Run Box Standard Diesel Only IncludedEngine – Accessories 18 Rear Run Box Rear Hand Throttle Option Diesel Only $134.00 Engine – Accessories 19 Rear Run Box Engine Hour Meter Option Diesel Only $50.00 Engine – Accessories 20 Rear Run Box A/C Hour Meter Option Diesel Only $50.00 Engine – Accessories 21 Rear Run Box Voltmeter J1939 Option Diesel Only $50.00 Engine – Accessories 22 Rear Run Box Oil Pressure Gauge J1939 Option Diesel Only $50.00 Engine – Accessories 23 Rear Run Box Coolant Gauge J1939 Option Diesel Only $50.00 Engine – Accessories 24 Mechanical Gauges - Murphy Oil Pressure and Coolant Temperature Option Diesel Only $196.00 Engine - Accessories 25 Adjustable brake and accelerator pedals (minimum 3 in.) Option Diesel Only $1,130.00 Engine – Accessories 26 Rear Run Box Programmable Forster Gauge Option Diesel Only $150.00 Engine - Diagnostics
Engine – Diagnostics 1 Cummins Inline 6 Adapter Kit, Insite Basic Option Diesel Only $1,373.00 Engine – Diagnostics 2 Cummins Quickserve Online 1 Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 3 Cummins Quickserve Online each Additional Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 4 Cummins INSITE Diagnostic Program 1 Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 5 Cummins INSITE Diagnostic Program each Additional Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 6 ISL G Fold Up Wiring Diagram Not Applicable Diesel Only NA Other Option - Specify
Engine - Tune Up Kit
Engine – Tune Up Kit 1 Cummins Tune - Up Kit (Includes the Following) Option $7,580.00 Engine – Tune Up Kit 2 Includes - Pressure Gauge incl with kitEngine – Tune Up Kit 3 Includes - Torque Wrench incl with kitEngine – Tune Up Kit 4 Includes - Oil Filter Wrench incl with kitEngine – Tune Up Kit 5 Includes - Engine Coolant & Fuel Wrench incl with kitEngine – Tune Up Kit 6 Includes - Belt Tension Gauge incl with kitEngine – Tune Up Kit 7 Includes - Belt Tension Gauge incl with kit DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Engine – Tune Up Kit 8 Includes - Charge- A/C CAC Pressure Kit incl with kit Engine – Tune Up Kit 9 Includes - Engine Barring Gear incl with kitEngine – Tune Up Kit 10 Includes - Torque Wrench incl with kitEngine – Tune Up Kit 11 Includes - Roller Follower Rem. & Installation Tool incl with kitEngine – Tune Up Kit 12 Includes - Compucheck Fitting incl with kit Other Option - Specify
Fare Box
Fare Box 1 No Fare box, Power Circuit and Ground strap only Standard IncludedFare Box 2 GFI 36" Fastfare Option $13,781.00 Fare Box 3 GFI 36" Odyssey Option $13,781.00 Fare Box 4 GFI 41" Fast Fare Option $13,781.00 Fare Box 5 GFI 41" Odyssey Option $13,781.00 Fare Box 6 Diamond Model H w/Two (2) Vaults Option $2,225.00 Fare Box 7 Diamond Model SV w/Two (2) Vaults Option $1,325.00 Fare Box 8 Main T1 Fare box w/Two V1 Vaults in Standard Paint Colors Not Applicable NAFare Box 9 Main M 4 Fare box w/Two V4 Vaults in Standard Paint Colors Not Applicable NAFare Box 10 Main SL 5 Fare box w/Two V5 Vaults in Standard Paint Colors Not Applicable NAFare Box 11 Cubic Fare box Option QuoteFare Box 12 Denominator Manual Passenger Counter (Rows X Tallies X $32) Option $32.00 Fare Box 13 Globe Transfer Cutter Option $63.00 Fare Box 14 Add TRiM to Fast Fare Option $5,644.00 Fare Box 15 Add Smart Card Reader to Fast Fare Option $748.00 Fare Box 16 Add Barecode Reader to Fast Fare Option $721.00 Fare Box 17 Add TRiM to Odyessey Option $5,216.00 Fare Box 18 Add Smart Card Reader to Odyssey Option $669.00 Other Option - Specify
HVAC
HVAC 1 Thermo King System (Per Technical Specification) Standard IncludedHVAC 2 TK Intelligaire 3 W/X 616 Compressor, R134A, Reliance Brushless Cond. & Evap.

Motors Option $3,000.00
HVAC 3 TK System w/General Electric Field Wound Motors (Cond & Evap) Deduction ($2,000.00)HVAC 4 TK System w/General Electric P.M. Motors Deduction ($1,300.00)HVAC 5 TK System w/X430Compressor Deduction ($900.00)HVAC 6 TK System w/S391 Screw Compressor Standard IncludedHVAC 7 TK System w/S616 Screw Compressor Option $3,000.00 HVAC 8 TK Electric HVAC System TEA14 (including alternator for Diesel buses) Option $14,495.00 HVAC 9 TK Pressure and Return Gauges Mounted to Unit Option $356.00 HVAC 10 R407c Refrigerant Option $322.00 HVAC 11 MCC Drivers Heater W/Brushless Motors Standard IncludedHVAC 12 MCC Drivers Heater W/Brush Motors Deduction ($387.00)HVAC 13 MCC Front Stepwell/Threshold Heater W/Brushless Motor (Each) Option $324.00 HVAC 14 MCC Underseat/Rear Stepwell Heater W/Brushless Motor (Each) Option $458.00 HVAC 15 MCC Underseat/Rear Stepwell Heater W/Brush Motor (Each) Not Applicable NAHVAC 16 Sutrak All Electric Air Conditioning - Roof Mount Not Applicable NAHVAC 17 Sutrak All Electric Air Conditioning - Rear Mount (Diesel & CNG only) Not Applicable NAHVAC 18 ACT Convection Heater Not Applicable NAHVAC 19 ACT Espar Fuel-Fired Supplemental Coolant Heater Not Applicable NAHVAC 20 Warm Welcome Mat (Rear Door) Option $282.00 HVAC 21 Warm Welcome Mat (Installed on W/C Ramp) Not Applicable NAHVAC 22 Eberspacher AC 136 G3 AE Not Applicable NAHVAC 23 Air Purification System (Climate Comfort Technologies CCT-24 unit) Option $2,188.00 HVAC 24 TK Electric HVAC System TE14 (For BAE Hybrid buses only) Option $1,160.00 HVAC 25 TK Electric HVAC System TE18 (For BEB buses only) Standard IncludedHVAC 26 Sutrak All Electric Air Conditioning - Rear Mount (Diesel only) Option $15,948.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 HVAC Special Purpose
HVAC Special Purpose 1 TK Intelligaire - Diagnostics Option $1,709.00 HVAC Special Purpose 2 Carrier Micromax ATE Diagnostics Not Applicable NAHVAC Special Purpose 3 Webasto Diagnostic Tool Option $494.00 HVAC Special Purpose 4 Van Steenburgh Regional Recovery System (JV90- 1) Option $10,138.00 HVAC Special Purpose 5 Eberspacher diagnostics Not Applicable NA Other Option - Specify
Manuals
Manuals 1 Drivers Handbook (1 Manual/1 CD per Bus Order) Standard IncludedManuals 2 Service Manual (1 Manual/1 CD per Bus Order Standard IncludedManuals 3 Parts Manual (1 Manual/1CD per Bus Order) Standard IncludedManuals 4 Electrical Schematics (1 Manual/1CD per Bus Order) Standard IncludedManuals 5 Vendor Manuals (1 Manual/1 CD per Bus Order) Standard IncludedManuals 6 Additional Driver's Handbook Option $10.00 Manuals 8 Additional Parts Manuals Option $70.00 Manuals 9 Additional Electrical Schematics Option $70.00 Manuals 10 Additional Electrical Multiplex Option $15.00 Manuals 11 Additional Cummins ISL Manuals (4 Books) Option $515.00 Manuals 12 Additional Allison B400 Manuals (6 Books) Option $400.00 Manuals 13 Additional ZF 6hp594 Manuals (5 Books) Option $400.00 Manuals 14 Additional Voith Manuals (7 Books) Option $400.00 Manuals 15 Additional Amerex Manuals Option $50.00 Manuals 16 Additional TRW Steering Gear Manuals Option $30.00 Manuals 17 Additional Thermo King Manual Option $30.00 Manuals 18 Additional Carrier HVAC Manuals (2 Books) Option $30.00 Other Option - Specify
Safety
Safety 2 Amerex V-25lb ABC System Standard Diesel & Hybrid IncludedSafety 3 Amerex VH-25lb ABC Cylinder Not Applicable NASafety 4 Amerex V-30lb ABC Cylinder Not Applicable NASafety 5 Amerex Fire Suppression System w/Automatic Shutdown, Programmable Heat Detectors (PHDs) and Automatic Maintenance Testing (AMT) Not Applicable NA Safety 6 Amerex Safety Net 2-Zone Fire Detection/Suppression System Not Applicable NASafety 7 Jomar Firestick Liquid Not Applicable NASafety 8 Kidde - Dual Spectrum Option $333.00 Safety 9 Kidde - Ltd Spectrum Option $233.00 Safety 10 Kidde TLSE Spectrum Not Applicable NASafety 11 Fogmaker Fire Suppression System (water mist) Option $1,248.00 Safety 14 Firetrace Automatic Fire Detection/Suppression System (gas detection base system) Not Applicable NASafety 15 Remove Amerex Deduction ($2,099.00) Safety 16 Fire Extinguisher and Safety Triangle Kit Standard IncludedSafety 17 Twenty - Four Unit First Aid Kit Option $69.00 Safety 18 Ten Unit First Aid Kit Not Applicable NASafety 19 Blood Borne Pathogens Kit Option $35.00 Safety 20 Bio - Hazard Disposal Kit Option $35.00 Safety 21 High Temperature Protective Sleeves for Component Lines Not Applicable NASafety 22 (3) 20 - Minute Road Flares Not Applicable NASafety 23 Wheel Chocks (Per Set) Option $35.00 Safety 24 Electric - Standard no fire suppression Standard IncludedSafety 25 Amerex Safety Net with Methane Detection ABC System Standard CNG only IncludedSafety 26 Fogmaker Fire Suppression System w/Methane Detection (water mist) Option CNG only $678.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Steering
Steering 1 Ross Model TS 65 Not Applicable NASteering 2 Sheppard Model M110 Not Applicable NASteering 3 TRW Electric Assisted Steering $2,494.00 Steering 4 TRW TAS6505 Standard IncludedSteering 5 Standard Size Padded Steering Wheel Standard IncludedSteering 6 Douglas Autotech 'Double-Knuckle' Steering Column (PN 9003148-C) Option $1,200.00 Other Option - Specify
Towing & Hoisting
Towing & Hoisting 1 Set Towing Adapters/Tow Bar Option $2,667.00 Towing & Hoisting 2 Set of Hoist Adapters (Includes the 4 Following Items) Option $3,883.00 Towing & Hoisting 3 Incl w/set - Front Saddle incl with setTowing & Hoisting 4 Incl w/set - Front Adapters incl with setTowing & Hoisting 5 Incl w/set - Rear Saddle incl with setTowing & Hoisting 6 Incl w/set - Rear Adapters incl with setTowing & Hoisting 7 Front towing point Not Applicable NATowing & Hoisting 8 Rear towing point Not Applicable NA Other Option - Specify
Training
Training 1 none Standard $0.00 Training 2 Operator Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 3 Operator Orientation - 8 Hours, (Procuring Agency) Standard $0.00 Training 4 Operator Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 5 Maintenance Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 6 Maintenance Orientation - 24 Hours, (Procuring Agency) Option $5,000.00 Training 7 Maintenance Orientation - 32 Hours, (Procuring Agency) Not Applicable NATraining 8 Maintenance Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 9 Technical Training - 96 Hours, (Procuring Agency) Price Proposal Form Option $20,000.00 Training 10 Technical Training - Additional hours of training, per 24hr module Option $5,000.00 Training 11 OEM Training - Two Slots for "Train the Trainers" Technical Instruction; PER DAY Option $900.00 Training 12 OEM Training - Additional Slots for "Train the Trainers" Technical Instruction; PER DAY PER ADD'L STUDENT Option $450.00 Training 13 Body, Chassis, Suspension and Steering - (8 Hour Class), Procuring Agency Not Applicable NATraining 14 Body, Chassis, Suspension and Steering - (24 Hour Class), Procuring Agency Option $5,000.00 Training 15 Body, Chassis, Suspension and Steering - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 16 Electrical and Electronics - (8 Hour Class), Procuring Agency Training 17 Electrical and Electronics - (24 Hour Class), Procuring Agency Option $5,000.00 Training 18 Electrical and Electronics - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 19 Air and Brake Systems - (24 Hour Class), Procuring Agency Option $5,000.00 Training 20 Air and Brake Systems - (8 Hour Class), Procuring Agency Not Applicable NATraining 21 Air and Brake Systems - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 22 HVAC and Climate Controls - (4 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 23 HVAC and Climate Controls - (8 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 24 HVAC and Climate Controls - Additional hours of training per hour, Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 25 Engine - (8 Hour Class), per Student at Procuring Agency Option $450.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 26 Engine - (24 Hour Class), per Student at Procuring Agency Option $1,350.00 Training 27 Engine - additional hour of training per hour, per Student at Procuring Agency Option QuoteTraining 28 Transmission - (8 Hour Class), per Student, at Procuring Agency Option $450.00 Training 29 Transmission - (24 Hour Class), per Student, at Procuring Agency Option $1,350.00 Training 30 Transmission - Additional hour of training per hour, per Student, at Procuring Agency Option Quote Training 31 Wheelchair Ramp - (2 Hour Class), at Procuring Agency Not Applicable NATraining 32 Wheelchair Ramp - (4 Hour Class), at Procuring Agency Standard $0.00 Training 33 Wheelchair Ramp - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 34 Destination Sign - (4 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 35 Destination Sign - (8 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 36 Destination Sign - Additional hour of training per hour, at Procuring Agency Not Applicable NA Training 38 Axles and Tires - Procuring Agency. Included in Body/Chassis Option $5,000.00 Training 39 Fire Suppression - (4 Hour Class), at Procuring Agency Standard $0.00 Training 40 Fire Suppression - (8 Hour Class), at Procuring Agency Standard $0.00 Training 41 Fire Suppression - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 42 Engine OEM Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 43 Engine OEM Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 44 Engine OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NATraining 45 Transmission Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 46 Transmission Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 47 Transmission Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 48 Data Communications System OEM Training (4 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 49 Data Communications System OEM Training (8 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 50 Data Communications System OEM Training (Additional hour of training per hour, 2 Persons), at Local Dealer Not Applicable NA Training 51 Hybrid Drive - (8 Hour Class), at Procuring Agency Option $3,500.00 Training 52 Hybrid Drive - (24 Hour Class), at Procuring Agency Option $10,500.00 Training 53 Hybrid Drive - (Additional hour of training per hour), at Procuring Agency Not Applicable NATraining 54 Hybrid Drive OEM Training (8 Hour Class, Per Person), at Local Dealer Option $3,500.00 Training 55 Hybrid Drive OEM Training (24 Hour Class, Per Person), at Local Dealer Option $10,500.00 Training 56 Hybrid Drive OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 57 Hybrid Transmission Training - (8 Hour Class, Per Person), at Local Dealer Option $3,500.00 Training 58 Hybrid Transmission Training - (24 Hour Class, Per Person), at Local Dealer Option $10,500.00 Training 59 Hybrid Transmission Training - (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 60 Additional training …
Other Option - Specify
Training Equipment
Modules
Training Equipment Modules 1 Fare Collection OEM Training (up to 10), 4 Day At Local Dealer Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training Equipment Modules 2 ISL/Voith D864.5 Not Applicable NA Training Equipment Modules 3 ISL/ZF 6AP1400B Not Applicable NATraining Equipment Modules 4 ISL/ZF HP594 Not Applicable NATraining Equipment Modules 5 ISX 12 G Not Applicable NATraining Equipment Modules 6 ISL G Not Applicable NATraining Equipment Modules 7 HVAC Training Module Option $43,213.00 Training Equipment Modules 8 I/O Controls Multiplex Board Option $17,750.00 Training Equipment Modules 9 Air Brake Training Board Option $35,938.00 Training Equipment Modules 10 ISB 6.7 Not Applicable NATraining Equipment Modules 11 ISL/B400R Power Plant Not Applicable NATraining Equipment Modules 12 L9/Voith D864.5 Training Module Option $198,114.00 Training Equipment Modules 13 L9/ZF 6AP1400B Training Module Option $194,647.00 Training Equipment Modules 14 L9N (CNG) Option $67,433.00 Training Equipment Modules 15 B6.7 (Hybrid engine) Option $50,369.00 Training Equipment Modules 16 L9/B400R Training Module Option $198,665.00 Training Equipment Modules 17 L9/B400R Power Plant Option $76,536.00 Training Equipment Modules 18 L9/Voith D864.5 Power Plant Option $74,950.00 Training Equipment Modules 19 L9/ZF 6AP1400B Power Plant Option $74,885.00 Training Equipment Modules 20 Fare Collection OEM Training (up to 10), 4 Day At Customer Site Option $7,495.00 Transmission
Transmission 1 Allison B- 400R, GEN IV Standard IncludedTransmission 2 Allison B- 500R, GEN IV Not Applicable NATransmission 3 Allison B- 500, GEN V Not Applicable NATransmission 4 Allison B- 500R, GEN V Not Applicable NATransmission 5 Voith D854.6 Option ($3,118.00)Transmission 6 ZF 6AP1400B Option ($2,973.00)Transmission 7 ZF 6HP594 Not Applicable NATransmission 8 "Transynd" Synthetic Standard IncludedTransmission 9 Titan Probalizer OD- 1014 Option $34.00 Transmission 10 Davco Electronic Fluid Level Gauge Option $134.00 Transmission 11 Keyed Transmission Lockout Switch on Dash Option $351.00 Transmission 12 Transmission Oil Temperature Gauge (Dash and Rear Run Box) Option $100.00 Transmission 13 Electric Transmission - 2 speed Not Applicable NATransmission 14 Electric Transmission - 4 speed Not Applicable NA Other Option - Specify
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Transmission
Diagnostics
Transmission Diagnostics 1 Allison Cable & Software Option $2,353.00 Transmission Diagnostics 2 Voith Cable & Software Option $1,254.00 Transmission Diagnostics 3 Voith Service Tool Kit Not Applicable NATransmission Diagnostics 4 Set of ZF Diagnostics (Includes the 3 Following Items) Option $3,248.00 Transmission Diagnostics 5 Includes - Testman Diagnostic System incl with setTransmission Diagnostics 6 Includes - SAE Cable incl with setTransmission Diagnostics 7 Includes - Ecomat Testman Software incl with set Other Option - Specify
W/C Restraints
W/C Restraints 1 AMSECO - A.R.M. Standard IncludedW/C Restraints 2 AMSECO Reliant Mobility Aid Securement System Not Applicable NAW/C Restraints 3 AMESCO Passive rear-facing restraints (rear facing barriers) per ADA location Option $833.00 W/C Restraints 4 USSC - First Option $0.00 W/C Restraints 5 Freedman - First Option $0.00 W/C Restraints 6 Q'Straint - QRT Standard IncludedW/C Restraints 7 Q'Straint - ORT 360 per ADA location Option $281.00 W/C Restraints 8 Q'Straint - Q'UBE 3- Point Securement Station per ADA location Option $104.00 W/C Restraints 9 Q'Straint - Quantum Securement System per ADA location Option $10,588.00 W/C Restraints 10 Q'Strant/Sure-Lok - OMNI Floor Anchor System per ADA location Option $113.00 W/C Restraints 11 Q’Straint Slide N Click floor mount restraint system per ADA location Option $0.00 W/C Restraints 12 USSC/Freedman Q- Pod W/C Restraint System per ADA location Option $3,950.00 W/C Restraints 13 AMESCO Dual Auto Lock W/C Restraint System per ADA location Option $91.00 W/C Restraints 14 USSC - V- PRO Option $0.00 W/C Restraints 15 Sure LOK - RTT Electric Not Applicable NAW/C Restraints 16 Sure LOK - RTT Manual Not Applicable NAW/C Restraints 17 Additional L-track per/foot Not Applicable NAW/C Restraints 18 RESNA WC18 compliant restraint Not Applicable NAW/C Restraints 19 RESNA WC19 compliant restraint Not Applicable NAW/C Restraints 20 AMSECO Q- Pod W/C Restraint System per ADA location Option $3,755.00 Wheel Chair Ramp
(low-floor only) / Lift
(high-floor only)
Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 1 Lift- U Model LU11, 1:6 Ratio, Front Door only Deduction ($175.00) Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 2 LIFT- U Model LU18, Dual- Mode 1:6 (Street)/1:8 (Sidewalk) Standard Included Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 3 Ricon 6:1 SA Self-Leveling Ramp Option $1,269.00 Wheel - Brakes
Wheel – Brakes 1 S - Cam Drum w/Wabsco ABS System - (DEDUCT) Deduction ($2,400.00)Wheel – Brakes 2 Front Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes 3 Rear Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes All Wheel Drum Brakes Deduction ($2,400.00)Wheel – Brakes 4 MGM “E-Stroke” Electronic Brake Monitoring System – Disc Brakes Option $1,845.00 Wheel – Brakes 5 MGM “E-Stroke” Electronic Brake monitoring System – Drum Brakes Option $1,879.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Wheel – Brakes 6 All Wheel Disc Brakes Standard Included Other Option - Specify
Wheel - Hubometer
Wheel Hubometer 1 none Standard IncludedWheel Hubometer 2 Veeder Root w/o Tenths w/o Guard Option $72.00 Wheel Hubometer 3 S&A Fleetwatch 392 Electronic Option $436.00 Wheel Hubometer 4 E J Ward Data System (Includes Receiver, Display Unit and Antenna) Option QuoteWheel Hubometer 5 Engler (Stemco) Mechanical W/o Tenths W/o Guard Option $79.00 Wheel Hubometer 6 Engler Hubometer W/Powder Coat Guard Option $204.00 Other Option - Specify
Wheel - Hubs
Wheel Hubs 1 Hub Piloted Wheels and Axles W/Grease Seals Standard IncludedWheel Hubs 2 Hub Piloted w/Oil Seals (per Axle) Option $0.00 Wheel Hubs 3 Stud Piloted Wheels and Axles w/Grease Seals Option $395.00 Wheel Hubs 4 Stud Piloted Wheels and Axles w/Oil Seals Option $395.00 Wheel Hubs 5 Wabco Traction Control Standard IncludedWheel Hubs 6 Hydraulic drop down snow chain system Option Quote Other Option - Specify
Wheel - Tires
Wheel – Tires 1 Customer Supplied Standard IncludedWheel – Tires 2 Michelin XZU2 (305/85R/22.5) Not Applicable NAWheel – Tires 3 Michelin XZU2 (305/70R/22.5) Not Applicable NAWheel – Tires 4 Michelin X incity Z (305/70R/22.5) (7 tires per bus) Option $4,375.00 Wheel – Tires 5 Michelin XZU3 (305/85/22.5) Not Applicable NAWheel – Tires 6 Michelin XZU2 (275/70R/22.5) Not Applicable NAWheel – Tires 7 Michelin XZE2+(H) (295/80/R22.5) (7 tires per bus) Option $5,586.00 Wheel – Tires 8 G152 (305/85R/22.5) (7 tires per bus) Option $5,432.00 Wheel – Tires 9 Goodyear G152 (305/70R/22.5) (7 tires per bus) Option $4,900.00 Wheel – Tires 10 Goodyear G152 (275/70R/22.5) (7 tires per bus) Not Applicable NAWheel – Tires 11 Firestone 18J (315/80R/22.5) (7 tires per bus) Option $5,012.00 Wheel – Tires 12 Firestone 16H (305/70R/22.5) (7 tires per bus) Option $4,823.00 Wheel – Tires 13 Bridgestone 16H (275/70R/22.5) (7 tires per bus) Not Applicable NAWheel – Tires 14 Tire Pressure Monitoring System Option $1,163.00 Wheel – Tires 15 Michelin X incity (305/85R/22.5) (7 tires per bus) Option $4,865.00 Other Option - Specify
Wheels
Wheels 1 (7) Powder Coated Steel Wheels (White and Black) Standard IncludedWheels 2 (7) Aluminum Alcoa - Full Polish Option $1,277.00 Wheels 3 (7) Aluminum Alcoa - Full Polish W/Dura Bright Finish Option $1,756.00 Wheels 4 (7) Aluminum Alcoa - Machine Finish Option $790.00 Wheels 5 (7) Aluminum Alcoa - Machine Finish W/Dura Bright Finish Option $1,294.00 Wheels 6 Remove Spare Wheel Deduction ($151.00)Wheels 7 Add Dura Flange to Alcoa (Per Wheel) Option $173.00 Other Option - Specify
Windows
Windows 2 Arow Laminated Safety Glass (1/4") - Framed Sliders Option $654.00 Windows 3 Arow Laminated Safety Glass (1/4") - Framed Fixed Option ($1,043.00)Windows 4 Arow Laminated Safety Glass (1/4") - Framed Transom - openable Standard IncludedWindows 5 Arow Hidden Framed Bonded - Fixed Option $2,625.00 Windows 6 Arow Hidden Framed Bonded - Transom -openable Option $4,486.00 Windows 7 Add Window Guards per bus (Acrylic Liner and Film) Option $938.00 Windows 8 anti-graffiti 3M film single layer (per inside window) Not Applicable NAWindows 9 Stormite flush-mount serviceable w/tip Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Windows 10 All windows equipped with liners attached Not Applicable NA Windows 11 Ricon Hidden Framed Bonded - Fixed Option $716.00 Windows 12 Ricon Hidden Framed Bonded - Transom -openable Option $3,983.00 Windows 13 anti-graffiti 3M film 4-layer (per bus, Ricon Only) Option $4,500.00 Windows 14 anti-graffiti 3M film 4-layer (per bus, Arow Only) Option $3,000.00 Windows 15 anti-graffiti 3M film single layer (per bus) Option $1,125.00 Other Items
Other Items 1 Brake System Diagnostics Not Applicable NAOther Items 2 Meritor Software (Tool Box), Serial Link/Interface Kit Option $432.00 Other Items 3 Engine Dolly Option $5,533.00 Other Items 4 Phillips Thermo Block Heater Option $140.00 Other Items 5 Engine Skid Protection Option $377.00 Other Items 6 Mobile Receiver for S&A 392 Hubometer Option $436.00 Other Items 7 Floor Mounted 4 -Way Flasher Switch Standard IncludedOther Items 8 Cup Holder Option $35.00 Other Items 9 Auxiliary Drivers Fan Option $89.00 Other Items 10 Stainless Steel Trash Bag Holder Option $170.00 Other Items 11 Transfer Cutter Option $63.00 Other Items 12 Keyed Ignition Switch Option $120.00 Other Items 13 Fiber Optic Backlighting on Drivers Dash Option $850.00 Other Items 14 Exterior Ad Frame - Front 21" X 40" Option $175.00 Other Items 15 Exterior Ad Frame - Curbside 30" X 88" Option $283.00 Other Items 16 Exterior Ad Frame -Streetside 30" X 144" Option $335.00 Other Items 17 Exterior Ad Frame Rear 21" X 72" Option $226.00 Other Items 18 I/O Controls LED Interior Lights Standard IncludedOther Items 19 Pretoria LED Interior Lights Option $0.00 Other Items 20 See II Transit Airfoil Not Applicable NAOther Items 21 Open Bottom Racks Option QuoteOther Items 22 Suburban Package Racks/Open Bottom Option QuoteOther Items 23 Twin Automatic Greasing System Not Applicable NAOther Items 24 EMCO -Wheaton Posi -Lock Nozzle Standard IncludedOther Items 25 Hybrid Drive Tools Not Applicable NAOther Items 26 Special Purpose Hybrid Drive Tool Kit Option $38,661.00 Other Items 27 BAE (APS2) beltless power pack Option $38,667.00 Other Items 28 WABCO E-COMP Not Applicable NAOther Items 29 ISB 6.7 Fold Up Wiring Diagram (hybrid option) Option $35.00 Other Items 30 Allison Hybrid Manuals Option $75.00 Other Items 31 BAE Hybrid Manuals Option $55.00 Other Items 32 Allison Mid-Life Overhaul Parts List and Cost Not Applicable NAOther Items 33 BAE Mid-Life Overhaul Part List and Cost Not Applicable NAOther Items 34 winter weather package (heated front entrance) Not Applicable NAOther Items 35 First Aid kit for 24 people option Option $69.00 Other Items 36 2 front dash-mounted fans to defrost front door Standard IncludedOther Items 37 driver’s LED reading light Standard IncludedOther Items 38 driver’s sun visors Standard IncludedOther Items 39 driver’s foot controls- adjustable Kongsberg system Option $1,130.00 Other Items 40 Stainless Steel molding to cover edges on entrance and rear rise on passenger assist Option $387.00
Other Items 41 Separate control for non-synchronized wipers Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Category Item # Description Diesel CNG Hybrid Electric Fuel Cell Price Body BRT STYLING
Body – BRT STYLING 1 Standard Styling Package 29 passenger seats Standard Standard Standard Standard IncludedBody – BRT STYLING 2 BRT Exterior Styling Package (Front & Rear) with One or Two Piece Windshield Option Option Option Not Applicable $13,950.00 Body – BRT STYLING 3 BRT Roof Fairings Front Option Not Applicable Option Not Applicable $1,250.00Body – BRT STYLING 4 Curbside A Post Skid Plate Option Option Option Option $86.00Body – BRT STYLING 5 BRT Roof Fairings Rear Option Not Applicable Not Applicable Not Applicable $1,250.00 Body – BRT STYLING 6 BRT Exterior Styling Package (Front Cap Only) with One or Two Piece Windshield Option Option Option Not Applicable $9,790.00 Body – BRT STYLING 7 BRT Plus Exterior Styling Package (Front, Rear & continuous roof line) with One or Two Piece Windshield Option Option Option Not Applicable $18,950.00

BODY - PASSENGER SEATS
BODY - PASSENGER SEATS 1 35 Passenger Seating Standard Standard Standard Standard IncludedBODY - PASSENGER SEATS 2 ADD additional double flip seat in lieu of fixed seat Option Option Option Option QUOTE BODY - PASSENGER SEATS 3 Remove one set of fixed seats Option Option Option Option QUOTEBODY - PASSENGER SEATS 4 remove individual seat Option Option Option Option QUOTE Engine
Engine 1 Cummins ISL-G 320 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 2 Cummins ISX-G 12 400 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 3 Cummins ISL-G 320 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 4 Cummins ISX-G 12 400 HP Not Applicable Not Applicable Not Applicable Not Applicable NAEngine 5 Cummins ISB 6.7 280 HP Not Applicable Not Applicable Not Applicable Not Applicable NA Engine 6 Cummins L9N 280 HP Not Applicable Standard Not Applicable Not Applicable Included Engine 7 Cummins L9 280 HP Standard Not Applicable Not Applicable Not Applicable IncludedEngine 8 Cummins L9 330 HP Option Not Applicable Not Applicable Not Applicable $2,413.00 Engine 9 Cummins B6.7 280HP Not Applicable Not Applicable Standard Not Applicable Included Exhaust
Exhaust 1 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 2 Diesel Particulate Filter (Active) Standard Not Applicable Standard Not Applicable IncludedExhaust 3 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 4 Diesel Particulate Filter (Active) Standard Not Applicable Standard Not Applicable IncludedExhaust 5 none Not Applicable Not Applicable Not Applicable Not Applicable NA Exhaust 6 Electric Not Applicable Not Applicable Not Applicable Standard IncludedExhaust 7 Not Applicable Fuel
Fuel 1 Fuel Gauge on Dash Option Option Option Not Applicable $134.00 Fuel 2 NGV2-3 Type 3 Complete CNG Cylinder (Vendor will list GGE) Not Applicable Not Applicable Not Applicable Not Applicable NAFuel 3 NGV 2-4 Type 4 Complete CNG Cylinder (Vendor will list GGE) Not Applicable Not Applicable Not Applicable Not Applicable NAFuel 4 Hexagon Lincoln's TUFFSHELL Roof Mount Package Not Applicable Not Applicable Not Applicable Not Applicable NAFuel 5 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) Standard Not Applicable Standard Not Applicable Included Fuel 6 EMCO - Posi/Lock Blue Urea Dispensing System Not Applicable Not Applicable Not Applicable Not Applicable NAFuel 7 Standard Gravity Fill Deduction Not Applicable Deduction Not Applicable ($265.00) Fuel 8 Fuel Gauge on Dash Option Option Option Not Applicable $134.00 Fuel 9 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill Option Not Applicable Option Not Applicable $834.00Fuel 10 80 Gallon Net Useable Split Fuel Tanks Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 11 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) Standard Not Applicable Standard Not Applicable Included Fuel 12 EMCO - Posi/Lock Blue Urea Dispensing System Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 13 Standard Gravity Fill Deduction Not Applicable Deduction Not Applicable ($265.00) Fuel 14 Fuel Gauge on Dash Option Option Option Not Applicable $134.00Fuel 15 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill Option Not Applicable Option Not Applicable $834.00 Heavy Duty - 40 Foot
Options Price Sheet
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Fuel 16 80 Gallon Net Useable Split Fuel Tanks for ADA Each Side Not Applicable Not Applicable Not Applicable Not Applicable NA Fuel 17 NGV 2-4 Type 4 Complete CNG Cylinder (20,000 SCF) Not Applicable Standard Not Applicable Not Applicable Included Fuel 18 NGV 2-4 Type 4 Complete CNG Cylinder (16,000 SCF) Not Applicable Option Not Applicable Not Applicable QUOTE Fuel Filter
Fuel Filter 1 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 2 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 3 Spin on Primary and Secondary Fuel Filters Standard Standard Standard Not Applicable IncludedFuel Filter 4 Davco Fuel Pro 384, Heated Option Not Applicable Option Not Applicable $695.00Fuel Filter 5 Racor 490R30 Filter W/Thumbpump Option Not Applicable Option Not Applicable $475.00Fuel Filter 6 Low Fuel Alarm Standard Standard Standard Not Applicable IncludedFuel Filter 7 Spin on Primary and Secondary Fuel Filters Standard Standard Standard Not Applicable IncludedFuel Filter 8 Davco Fuel Pro 384, Heated Option Not Applicable Option Not Applicable $695.00Fuel Filter 9 Racor 490R30 Filter W/Thumbpump Option Not Applicable Option Not Applicable $475.00 Hybrid
Hybrid 1 none Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 2 none Not Applicable Not Applicable Not Applicable Not Applicable NA Hybrid 3 Auxiliary Coolant Heater Not Applicable Not Applicable Not Applicable Not Applicable NAHybrid 4 Allison EP40 Electric Drive System Not Applicable Not Applicable Not Applicable Not Applicable NAHybrid 5 Allison EP50 Electric Drive System Not Applicable Not Applicable Not Applicable Not Applicable NAHybrid 6 BAE Hybrid System HDS 200 - APS1-01K (1Kwh Battery w/Ultracaps) Not Applicable Not Applicable Standard Not Applicable Included Hybrid 7 BAE Hybrid System HDS200 - APS2-32K (32KwH Battery) Not Applicable Not Applicable Option Not Applicable $25,000.00 Hybrid 8 BAE Hybrid System HDS300 - APS1-01K (1Kwh Battery w/Ultracaps) Not Applicable Not Applicable Standard Not Applicable Included Hybrid 9 BAE Hybrid System HDS300 - APS3-32K (32KwH Battery) Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options
Passenger Seat Options 1 29 Passenger Seating - Citiseat Option Option Option Option $326.00 Passenger Seat Options 2 AMSECO - 6468 Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 3 AMSECO - Insight Standard Standard Standard Standard Included Passenger Seat Options 4 AMSECO - Metropolitan Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 5 AMSECO - 6466 Option Option Option Option $2,388.00 Passenger Seat Options 6 AMSECO - 6566 Option Option Option Option $6,051.00 Passenger Seat Options 7 AMSECO - 2005/6466 Suburbans Option Option Option Option $3,418.00Passenger Seat Options 8 AMSECO Vision Option Option Option Option $1,678.00Passenger Seat Options 9 AMSECO - Innovator 850 Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 10 AMSECO - Premier Not Applicable Not Applicable Not Applicable Not Applicable NAPassenger Seat Options 11 AMSECO - 2000 Series Recliners Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 12 AMSECO - VR50 Seat Inserts Standard Standard Standard Standard IncludedPassenger Seat Options 13 AMSECO - CR50 Seat Inserts Option Option Option Option $1,778.00 Passenger Seat Options 14 4 One - Angel Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 15 4 One Aries Option Option Option Option $5,384.00 Passenger Seat Options 16 4 One Brasil Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 17 4 One - Citiseat Option Option Option Option $326.00 Passenger Seat Options 18 4 One - Citipro Option Option Option Option $4,266.00 Passenger Seat Options 19 4 One - Diablo Option Option Option Option $9,635.00 Passenger Seat Options 20 4 One - Patriot Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 21 4 One Gemini Seating Option Option Option Option ($57.00) Passenger Seat Options 22 4 One Torino G Option Option Option Option QUOTEPassenger Seat Options 23 Kiel Ideo Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 24 Kiel Esos Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 25 Add (3) Passenger Seats to Curbside Wheelwell Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 26 Add (2) Passenger Seats to Curbside Wheelwell Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 27 Hinged Rear Settee Option Option Option Option $220.00 Passenger Seat Options 28 110 v outlets with USB charging throughout seating layout Not Applicable Not Applicable Not Applicable Not Applicable NA Passenger Seat Options 29 Dual USB charging station throughout seating layout Option Option Option Option $1,900.00 Passenger Seat Options 30 Cup holders for each seat (available on select seats only) Option Option Option Option QUOTE DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Passenger Seat Options 31 Self-storing footrests for each seat (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 32 Expanding mesh magazine holder on seat back (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 33 Three (3) point passenger restraint belts for each seat (available on select seats only) Option Option Option Option QUOTE Passenger Seat Options 34 Kiel Citos Option Option Option Option $1,599.00Passenger Seat Options 35 AMSECO - Insight Prime Option Option Option Option ($960.00) Passenger Seat Options 36 AMSECO - Insight Prime+ Option Option Option Option ($367.00) Trolley Styling Package
Trolley Styling Package 1 Classic San Francisco Option Not Applicable Option Not Applicable $84,969.00 Trolley Styling Package 1.1 Wood Seats Option Not Applicable Option Not Applicable $17,629.00Trolley Styling Package 1.2 Wood Trimmed Drivers Barrier Option Not Applicable Option Not Applicable $400.00 Trolley Styling Package 1.3 Wood Trimmed Electrical Box Option Not Applicable Option Not Applicable $400.00 Trolley Styling Package 1.4 Brass Powder coated Stanchions & Grab Rails Option Not Applicable Option Not Applicable $600.00 Trolley Styling Package 2 Add Vinyl Seat Cushions Option Not Applicable Option Not Applicable $4,836.00 Trolley Styling Package 3 Add Cow Catcher Option Not Applicable Option Not Applicable $3,349.00 Trolley Styling Package 4 Add Rope lights Option Not Applicable Option Not Applicable $3,611.00Trolley Styling Package 5 Add Vintage Style Graphics Package Option Not Applicable Option Not Applicable IncludedTrolley Styling Package 6 Add for Hybrid Roof Compatibility Not Applicable Not Applicable Option Not Applicable $8,869.00 Trolley Styling Package 7 2 Color Custom Paint for Trolley Option Not Applicable Option Not Applicable IncludedTrolley Styling Package 8 Brown Leather Overhead Grab Straps - Each Option Not Applicable Option Not Applicable $30.00 Category Item # Description Designation Propulsion (if applicable) Price Column1 Column2 Air
Air 1 Shop Air Connection (Milton S790) Standard IncludedAir 2 Bendix AD9, (300 ci Purge) Not Applicable NAAir 3 Bendix Adip, Heated Option $673.00 Air 4 Bendix Puraguard Air/Oil Separator Option $486.00 Air 5 Wabco SS 1800 Air Dryer, Heated Option $543.00 Air 6 Chicago Rawhide T2000 Not Applicable NAAir 7 Chicago Rawhide Dual Turbo 2000 Standard IncludedAir 8 Graham White QBA 15 "Sludge Buster", Heated Option $675.00 Air 9 Kingston Auto Drain Valve At Ping Tank Standard IncludedAir 10 Terminate Kneeling Operation Sensor Standard IncludedAir 11 Wabco 37.4 cfm twin cylinder air compressor (ISB 6.7 engine only) Standard Included Other Option - Specify
Body- Bike Rack
Body – Bike Rack 1 Sportworks Apex 3 - 3 Position Bike, Stainless Steel Not Applicable NABody – Bike Rack 2 Sportworks - 2 Position Bike, Black Powder Coated Option $499.00 Body – Bike Rack 3 Sportworks - 2 Position Bike, Stainless Steel Option $778.00 Body – Bike Rack 4 Sportworks - 3 Position Bike, Black Powder Coated Not Applicable NABody – Bike Rack 5 Sportworks - Trilogy 3 Position Bike, Stainless Steel Not Applicable NABody – Bike Rack 6 Midwest Bus - BYK RYK (Stainless Steel) Option $806.00 Body – Bike Rack 7 Bike Rack Deployed Lamp on Dash Option $200.00 Body – Bike Rack 8 Bike Rack 5" Spot Mirror Option $36.00 Body – Bike Rack 9 Bike Rack Mounted Advertising Frame, 14"X 44" Option $306.00 Body – Bike Rack 10 Sportworks - Mounting Bracket Only Standard Included Body - Driver's Barrier
Body – Driver's Barrier 1 Wrap Around Fiberglass with Schedule Rack Cutouts Option $61.00 Body – Driver's Barrier 2 Wrap Around Fiberglass W/O Schedule Rack Cutouts Standard Included All options listed below are the same for each bus length worksheet.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Driver's Barrier 3 Plexiglass Drivers Security Enclosure Option $875.00 Body – Driver's Barrier 4 Flat Melamine, Two Piece Not Applicable NABody – Driver's Barrier 5 Flat Melamine, Two Piece, w/(4) Schedule Holders Not Applicable NABody – Driver's Barrier 6 Plexiglass Drivers Security Enclosure, two pieces Not Applicable NABody – Driver's Barrier 7 ArowGuard Driver Protection Shield w/Standard Glass Option $4,988.00 Body – Driver's Barrier 8 ArowGuard Driver Protection Shield w/extended Glass Option $5,240.00 Body - Driver'Seat
Body – Driver Seat 1 Recaro Ergo Metro w/Fabric Seat and Back w/Gray Fabric Boxing Standard IncludedBody – Driver Seat 2 Recaro MCII Option $469.00 Body – Driver Seat 3 USSC 9100 ALX w/Fabric Seat and Back w/Gray Fabric Boxing Option $60.00 Body – Driver Seat 4 USSC 9100 ALX - 3 w/Fabric Seat and Back w/Gray Fabric Boxing Option $335.00 Body – Driver Seat 5 Add Headrest (USSC) Option $44.00 Body – Driver Seat 6 Add Arm Rest (Right Side Only, USSC) Option $169.00 Body – Driver Seat 7 Add Shoulder Belt (Recaro) Option $263.00 Body – Driver Seat 8 Add 3 -Point, Horizontally Adjustable D - Loop (Recaro) Option $250.00 Body – Driver Seat 9 Driver’s Seat Vacancy Alarm Option $134.00 Body – Driver Seat 10 Safety Orange Shoulder Belt (US SC ALX) Option $150.00 Body – Driver Seat 11 Silicon Foam At Lower Seat Cushion (USSC) Option $1,013.00 Body – Driver Seat 12 Holdsworth Fabric Option $319.00 Body – Driver Seat 13 FR Treated Foam (Recaro) Option $306.00 Body – Driver Seat 14 USSC Q90 ALX Option $438.00 Body – Driver Seat 15 USSC G2A -2pt Drivers Seat (includes headrest) Option $494.00 Body – Driver Seat 16 Recaro M384 Seat Option $163.00 Body – Driver Seat 17 Add Headrest (Recaro) Standard IncludedBody – Driver Seat 18 Add Armrest (per side, Recaro) Option $169.00 Body – Driver Seat 19 Ready Reach Adjustable D - Loop (USSC) Option $175.00 Body – Driver Seat 20 Full Docket 90 FR Seat (USSC) Option $1,163.00 Body – Driver Seat 21 Add Liquicell Seat Cushion (Recaro) Option $131.00 Body – Driver Seat 22 Add Heated Seat Feature (Recaro) Option $250.00 Body – Driver Seat 23 Add Drivers Seat Belt Alarm Option $134.00 Body - Exit Door
Body – Exit Door 1 Standard Melamine Panels on Lower Section Both Sides of Rear Exit Door Standard Included Body – Exit Door 2 Upper Clear Plexiglas Modesty Panels Both Sides of Rear Exit Door (each) Option $220.00 Body - Exit Door 3 Accelerator Interlock when doors are open Standard Included Other Option - Specify
Body - Floor Covering
Body – Floor Covering 1 Greenwood ACQ Plywood W/RCA Rubber Deduction ($400.00)Body – Floor Covering 2 Altro Meta/Chroma Transfloor Standard IncludedBody – Floor Covering 3 Altro wood safety (vinyl simulated woodgrain) Option $0.00 Body – Floor Covering 4 Gerflor Tarabus Gaya Wood (vinyl simulated woodgrain) Option $350.00 Body – Floor Covering 5 Composite Sub Floor Option $2,200.00 Body – Floor Covering 6 Rear Seat Riser for Forward Facing Seats Standard IncludedBody – Floor Covering 7 Front Seat Risersor for Forward Facing Seats (Each Side) Option $1,100.00 Body – Floor Covering 8 Pressure-preservative treated plywood Standard IncludedBody – Floor Covering 9 Gerflor Terabus Sirius/Helios Option $350.00 Body - Mirror,
Exterior
Body – Mirror, Exterior 1 Safe Fleet One Piece 8" x 8" Flat Glazing W/Stainless Steel Arms, Remote Both Sides Standard Included DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Mirror, Exterior 2 Safe Fleet One Piece 8" x 8" Flat Glazing W/S.S. Arms, Manual W/6" Spot Mirror Option $82.00 Body – Mirror, Exterior 3 Safe Fleet 8" x 15" 2 Piece, Heated, Remote Both Sides Option $110.00 Body – Mirror, Exterior 4 Safe Fleet 9" x 11" 2 Piece, Heated, Remote Both Sides Not Applicable NABody – Mirror, Exterior 5 Safe Fleet 9" x 13" Class "A" 2 Piece, Heated, Remote Both Sides Option $349.00 Body – Mirror, Exterior 6 Safe Fleet 10" x 13:", 2 Piece (Flat & Convex), Heated, Remote Both Sides Option $49.00 Body – Mirror, Exterior 7 Safe Fleet 10" x 11 " 1 Piece, Heated, Remote Both Sides Option $0.00 Body – Mirror, Exterior 8 Rosco 8" x 15" 1 Piece, Heated Remote Both Sides Deduction ($60.00)Body – Mirror, Exterior 9 Lucerix Metagal 7" x 15" 2 Piece, Heated Remote Both Sides Option $210.00 Body – Mirror, Exterior 10 Velvac View-All System (Camera Mounted in Exterior Mirror W/LCD Screen in Driver Area) Not Applicable NABody – Mirror, Exterior 11 Velvac Hyperion Lane Change Guardian Not Applicable NA Other Option - Specify
Body - Mirror, Interior
Body – Mirror, Interior 1 Mirror - 8 1/2 " X 16" Standard IncludedBody – Mirror, Interior 2 Mirror - 4.75" X 15" Option $0.00 Body – Mirror, Interior 3 Mirror - Front Door 6" Round on Header Door Standard IncludedBody – Mirror, Interior 4 Mirror - Rear Exit Door/Step Well 12" Convex Standard IncludedBody – Mirror, Interior 5 Mirror - 8 1/2 " X 1" center Not Applicable NABody – Mirror, Interior 6 Mirror - 5" flat Option $36.00 Other Option - Specify
Body - Paint & Decal
Body – Paint & Decal 1 One Color w/Roof Numbers Standard IncludedBody – Paint & Decal 2 (2) Colors, with and without Black Mask At Windows Option $2,150.00 Body – Paint & Decal 3 (3) Colors, with and without Black Mask At Windows Option $4,300.00 Body – Paint & Decal 4 Basic Decal Package (Up to Three Strips and Equivalent Design) Option QuoteBody – Paint & Decal 5 Custom Paint/Decal Design (Per Purchasers' Spec) Option QuoteBody – Paint & Decal 6 Clear Coat Complete Bus Not Applicable NABody – Paint & Decal 7 Remove Roof Numbers Deduction ($75.00)Body – Paint & Decal 8 Add Clear Coat (per Paint Pass) Option $450.00 Body - Passenger
Signal
Body – Passenger Signal 1 Pullcords - Above Windows (Neutral Or Yellow) w/Touch Pad At W/C Positions Standard IncludedBody – Passenger Signal 2 Touch Tape (At Window Mullions) Option $1,116.00 Body – Passenger Signal 3 Button at Exit Door Vertical Stanchion Option $68.00 Body – Passenger Signal 4 Additional Amber Stop Request Lamp Mounted on Driver's Dash Option $38.00 Body – Passenger Signal 5 Button in the Parcel Rack Not Applicable NA Other Option - Specify
Body - Rear Door
Body – Rear Door 1 34" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) Standard IncludedBody – Rear Door 2 48" Wide Rear Door w/Full Driver Control (Air Open/Air Close) Option $2,821.00 Body – Rear Door 3 56" Wide Rear Door w/Full Driver Control (Air Open/Air Close) Option $2,821.00 Body – Rear Door 4 Electric Operated Front/Rear Door Motor and Control Option $4,012.00 Body – Rear Door 5 Passenger Open (Push Open/Spring Close) Not Applicable NABody – Rear Door 6 Touch Bars (Air Open/Spring Close) Option $553.00 Body – Rear Door 7 Touch Bars w/Driver Override Option $553.00 Body – Rear Door 8 Touch Tape in Place of Touch Bars Not Applicable NABody – Rear Door 9 Vapor Class Acoustic (Photo Sensor) Option $3,292.00 Body – Rear Door 10 Vapor V Touch (Electronic Touch Bar) Option $553.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Rear Door 11 Vapor Electric Transit Operator Not Applicable NA Body – Rear Door 12 Vapor Electric Door Control / 1939 Interface Option $575.00 Body – Rear Door 13 Vapor Optical Pressure Wave Switch Option $350.00 Body – Rear Door 14 Exterior Air Release (Front Door Control Valve) Option $162.00 Body – Rear Door 15 Driver Push Button Door Controls Option $220.00 Body – Rear Door 16 Bode CADS All electric doors Not Applicable NABody – Rear Door 17 Remove Rear Door, Add Two Seats Deduction ($1,300.00)Body – Rear Door 18 Ventura electric rear door Not Applicable NABody – Rear Door 19 Add Center Door (Articulated bus only) Not Applicable NA Other Option - Specify
Body - Roof Hatch
Body – Roof Hatch 1 Manual Hatch At Front and Rear Positions Option $317.00 Body – Roof Hatch 2 One (1) Roof Hatch Position - Rear Standard IncludedBody – Roof Hatch 3 Electric Hatch with Driver Control (per Position) Option $494.00 Body – Roof Hatch 4 Glass Hatch in Lieu of Standard Option $103.00 Body – Roof Hatch 5 Additional Roof Hatch Position Option $317.00 Other Option - Specify
Body - Schedule Rack
Body – Schedule Rack 1 none Standard IncludedBody – Schedule Rack 2 Innocom Schedule Racks 3.75" x 7" x 1.5" Option $18.00 Body – Schedule Rack 3 Innocom Schedule Racks 8.62" x 1 1" x 1" Option $36.00 Body – Schedule Rack 4 22" x 21" Black, RH Load Open Back Option $180.00 Body – Schedule Rack 5 Transit Information Products - 19" x 21" OBIC 19/214P1LTRMC Option $265.00 Body – Schedule Rack 6 Transit Information Products - 19" x 21" OBICT10P2LTRMC Option $480.00 Other Option - Specify
Body -
Stanchions/Grab Rails
Body – Stanchions/Grab
Rails 1 Stainless Steel Stanchions and Grab Rails and Modesty Panel Tubes Option $0.00 Body – Stanchions/Grab
Rails 2 Powder Coated Vertical Stanchions, Grab Rails and Modesty Panel Tubes Standard Included Body – Stanchions/Grab
Rails 3 Powder Coated Vertical Stanchions only Option $0.00 Body – Stanchions/Grab
Rails 4 Farebox Guard Rail Standard Included
Body – Stanchions/Grab
Rails 5 Grab Rail Forward Wheel Housing Option $50.00
Body – Stanchions/Grab
Rails 6 Luggage Rack 68", Two -Tier with Fixed Shelf's Option $3,566.00 Body – Stanchions/Grab
Rails 7 Vinyl Coated Nylon Grab Straps (Cost per Handle) Option $25.00 Body – Stanchions/Grab
Rails 8 SSTL Spring Loaded Grab Handle (Cost per Handle) Option $123.00 Body – Stanchions/Grab
Rails 9 non-vinyl-coated nylon grab straps (per handle, color to be chosen by agency) Option $25.00 Other Option - Specify
Cooling System
Cooling System 1 Modine Side By Side By Side Plate Fin Radiator Not Applicable NACooling System 2 Modine Electric Cooling Fan System Standard IncludedCooling System 3 EMP Electric Cooling Fan System Option $1,256.00 Cooling System 4 Electric Fan Cooling System (Non EMP - Specify OEM) Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Cooling System 5 Grayson Electric Cooling Fan System Not Applicable NA Cooling System 6 Hydraulic Cooling Fan Not Applicable NACooling System 7 L&M Radiator Not Applicable NACooling System 8 Masabi Radiator Not Applicable NACooling System 9 E - Coat Radiator, CAC & Hydraulic Cooler Not Applicable NACooling System 10 Radiator Tank Guard Option $272.00 Cooling System 11 Double Breeze Constant Tension Clamps Option $125.00 Cooling System 12 Oetiker Constant Torque Clamps Standard IncludedCooling System 13 Gates - Greenstripe Hose Option $198.00 Cooling System 14 Webasto Model Thermo 300 ( 104,000 btu ) Coolant Heater Not Applicable NACooling System 15 Webasto Model Thermo 230 ( 80,000 btu ) Coolant Heater Not Applicable NACooling System 16 Proheat Model X120 (120,000 btu) Coolant Heater Not Applicable NACooling System 17 Proheat Model X80 ( 80,000 btu ) Coolant Heater Not Applicable NACooling System 18 Proheat Model X50 ( 50,000 btu ) Coolant Heater Not Applicable NACooling System 19 Proheat Model X45 ( 45,000 btu ) Coolant Heater Not Applicable NACooling System 20 Electric Coolant Auxiliary Heater Not Applicable NACooling System 21 Espar Model Hydronic #4 Not Applicable NACooling System 22 Espar Model Hydronic #5 Not Applicable NACooling System 23 Articulated Only? Not Applicable NACooling System 24 EMP Electric Cooling Fan System Not Applicable NACooling System 25 Electric Fan Cooling System (Non EMP - Specify OEM) Not Applicable NACooling System 26 Double Breeze Constant Tension Clamps Not Applicable NACooling System 27 Oetiker Constant Torque Clamps Not Applicable NACooling System 28 Grayson Electric Cooling Fan System Not Applicable NACooling System 29 Valeo (formerly Webasto) Thermo Plus 300 Option $2,967.00 Cooling System 30 Valeo (formerly Webasto) Thermo Plus 230 Option $2,696.00 Cooling System 31 Proheat Model X30 Coolant Heater Option $2,596.00 Cooling System 32 Proheat Model M50 Coolant Heater Option $2,796.00 Cooling System 33 E - Coat Radiator, CAC & Hydraulic Cooler (DIESEL OR CNG) OPTION $904.00 Cooling System 34 E - Coat Radiator, CAC & Hydraulic Cooler (HYBRID) OPTION $1,485.00 Electrical
Electrical 1 Voltage Spike Arrestor, S.K.I. Products SKI241 -101445, or Approved Equal Not Applicable NAElectrical 2 24 Volt to 13.6 Volt DC - DC Converter, 30 Ampere Output, Model 1645 - 24 - 12 - 30, Manufactured By Wilmore Electronics Co., Inc. or Equivalent Not Applicable NA Electrical 3 Battery Voltage Equalizer Standard IncludedElectrical 4 24V battery isolation system (keeps house batteries from being drained by cameras, recorders, etc.) Not Applicable NA Other Option - Specify
Electrical -
Accessories
Electrical – Accessories 1 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Drivers Area Option $75.00 Electrical – Accessories 2 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Rear Air Return Grille Area Option $75.00
Other Option - Specify
Electrical - Alternator
Not for Electric
Electrical – Alternator 1 Delco 50 DN (270 AMP) Not Applicable NAElectrical – Alternator 3 Penntex Px833 Alternator Not ApplicableElectrical – Alternator 4 Neihoff C - 701 (300 AMP) Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Alternator 5 Neihoff C - 703 (330 AMP) Not Applicable NA Electrical – Alternator 6 Neihoff C - 803 (500 AMP) Air Cooled Standard IncludedElectrical – Alternator 7 EMP POWER 450 AMP Brushless Alternator Option $0.00 Electrical – Alternator 8 KA500 HIPRO (KHP 500-000) (475 AMP) Not Applicable NAElectrical – Alternator 9 Marine Cabling for Charging System Option $893.00 Other Option - Specify
Electrical - Automatic
Passenger Counter
Electrical – Automatic
Passenger Counter
1 none Standard Included
Electrical – Automatic
Passenger Counter 2 UTA Automatic Passenger Counter System with GPS, WLAN Capabilities Option $5,709.00 Electrical – Automatic
Passenger Counter 3 UTA APC Sensors, Cabling, CPU only Option $1,800.00 Electrical – Automatic
Passenger Counter 4 Wiring provisions IAW APC manufacture Not Applicable NA Electrical – Automatic
Passenger Counter 5 Strategic Mapping APC system Not Applicable NA Electrical – Automatic
Passenger Counter 6 UTA Driver Seat Occupancy Monitor Option $327.00 Electrical – Automatic
Passenger Counter 7 UTA Multi-Slot Bike Rack Monitoring Option $533.00 Other Option - Specify
Electrical - Auxiliary
Lights
Electrical – Auxiliary Lights 1 Four (4) 4" Diameter LED Auxiliary Brake Lights Option $100.00 Electrical – Auxiliary Lights 2 Two (2) 4" Diameter LED Auxiliary Brake Lights Standard IncludedElectrical – Auxiliary Lights 3 Two (2) Dialight 7" Diameter LED Auxiliary Brake Lights Option $0.00 Electrical – Auxiliary Lights 4 4 LED Brake Strip Lamps Option $300.00 Electrical – Auxiliary Lights 5 JKA Enterprises LED "Stop" Light Option $470.00 Electrical – Auxiliary Lights 6 Exterior Curb Lamps, Front & Rear - Dialight Standard Included Electrical – Auxiliary Lights 7 Triangle Amber LED Yield Sign - Dialight Option $640.00 Electrical – Auxiliary Lights 8 Two (2) Red LED Brake Strip Lamps Option $100.00 Electrical – Auxiliary Lights 9 Remove LED Auxiliary Brake Lights (DEDUCT) Deduction ($100.00) Electrical – Auxiliary Lights 10 Overhead Farebox LED - Light W/Night - Day Switch (on Drivers Side Panel) - Light Illuminates W/Frt. Door Open and Switch in the Night Position Option $88.00 Electrical – Auxiliary Lights 11 Service Compartment Lights - LED Standard IncludedElectrical – Auxiliary Lights 12 LED Beacon Light Not Applicable NA Electrical – Auxiliary Lights 13 LED Decel Lights (2) - Non - Flashing only (Per NHTSA) Option $200.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify
Electrical - Battery &
Battery Chargers
Electrical - Battery & Battery
Chargers 1 Polyethylene battery tray and enclosure Not Applicable NA Electrical – Battery & Battery
Chargers 2 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) Standard Diesel Only Included Electrical – Battery & Battery
Chargers 3 (4) DEKA Group 32 Top Post OPTION $223.00
Electrical – Battery & Battery
Chargers 4 DEKA AGM Type 8D/Group 32 Option $511.00
Electrical – Battery & Battery
Chargers 5 (4) Odyssey Group 32 Standard CNG & Hybrid Included Electrical – Battery & Battery
Chargers 6 (4) Trojan Group 32 Not Applicable NA
Electrical – Battery & Battery
Chargers 7 Ultra Capacitors - KBI KAPower Option $3,818.00 Electrical – Battery & Battery
Chargers 8 Anderson 350 Jump Start Connector Located in Battery Compartment Option $95.00 Electrical – Battery & Battery
Chargers 9 Remove Anderson 350 Jump Start (Located in engine comparment) Deduction ($140.00) Electrical – Battery & Battery
Chargers 10 En-route Battery Charging system (ABB HVC-450PD Pantograph, 450kW) ***Subject to production availability*** Option (electric only) $436,732.00 Electrical – Battery & Battery
Chargers 11 Inductive charging system for depot charging See item 24 below (electric only) See item 24 below Electrical – Battery & Battery
Chargers 12 Cable "Pigtail" Chargers Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 13 Battery Chargers Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 14 60 kW Charger and Dispenser (ChargePoint CPE250, 62.5kW) ***Subject to production availability*** Option (electric only) $60,919.00 Electrical – Battery & Battery
Chargers 15 80 kW Charger and Dispenser Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 16 100 kW Charger and Dispenser (ABB HVC-100 Depot, 100kW) ***Subject to production availability*** Option (electric only) $118,484.00 Electrical – Battery & Battery
Chargers 17 125 kW Charger and Dispenser (ChargePoint CPE250, 125kW) ***Subject to production availability*** Option (electric only) $113,238.00 Electrical – Battery & Battery
Chargers 18 250 kW Inductive Charging In Route Pad Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 19 250 kW Inductive Charging On-Board Receiver Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 20 350 kW on-route Charger Not Applicable (electric only) NA Electrical - Battery & Battery
Chargers 21 Wave Wireless Inductive chargin Equipment In Route Pad Not Applicable (electric only) NA Electrical - Battery & Battery
Chargers 22 Wave Wireless Inductive Charging Equipment Depot Level Pad Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 23 Momentum Dynamics Wireless Inductive Charging Equipment In Route Pad ***Subject to production availability*** Option (electric only) 75 kW: $74,206 150 kW: $144,412 300 kW: $259,295 Electrical – Battery & Battery
Chargers 24 Momentum Dynamics Wireless Inductive Charging Equipment Depot Level Pad ***Subject to production availability*** Option (electric only) 75 kW: $74,206 150 kW: $144,412 300 kW: $259,295 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Battery & Battery
Chargers 25 Momentum Dynamics Wireless Inductive Charging Equipment On Bus Receiver ***Subject to production availability*** Option (electric only) 75 kW: $37,300 150 kW: $52,150 300 kW: $79,150 Electrical – Battery & Battery
Chargers 26
Momentum Dynamics/Princeton power Wayside Battery storage-one megawatt with optional 500 kW
***Subject to production availability***
Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 27 Electrical Management Software from Viriciti Not Applicable (electric only) NA 28 Energy Storage System = Battery Packs Not Applicable NA Electrical – Battery & Battery
Chargers 29 260 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 30 320 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 31 440 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 32 500 KWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 33 660 kWh Not Applicable (electric only) NA
Electrical – Battery & Battery
Chargers 34 800 kWh Not Applicable (electric only) NA
Electrical - Battery & Battery
Chargers 35 Electric Trolley Bus Package Not Applicable (electric only) NA Electrical – Battery & Battery
Chargers 36 150 kW Charger and Dispenser (ChargePoint PowerBlock, 150kW) ***Subject to production availability*** Option (electric only) $118,716.00 Electrical – Battery & Battery
Chargers 37 150 kW Charger and Dispenser (ABB HVC-150 Depot, 150kW) ***Subject to production availability*** Option (electric only) $127,213.00 Electrical – Battery & Battery
Chargers 38 En-route Battery Charging system (ABB HVC-300PD Pantograph, 300kW) ***Subject to production availability*** Option (electric only) $347,385.00 Electrical - Battery & Battery
Chargers 39 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) Deduction CNG & Hybrid ($663.00) Electrical – Battery & Battery
Chargers 40 (4) Odyssey Group 32 Option Diesel Only $663.00 Electrical -
Communication/Radi
o
Electrical –
Communication/Radio 1 Pre - Wire:12V/40A Direct Battery & 12V/10A Ignition (Route to RH Dash & Ele. Equip. Box) and Install Roof Mount RF/GPS/Cellular Antenna Standard Included Electrical –
Communication/Radio 2 Motorola XLT 2500, 10- 35 W, 800MHZ W/DEC Box and Silent Alarm Switch Not Applicable NA Electrical –
Communication/Radio 3 Motorola XLT 5000 Not Applicable NA Electrical –
Communication/Radio 4 Motorola APX4500 Option $3,700.00 Electrical –
Communication/Radio 5 Motorola CM200 and CM300, 45W, 439 - 470- MHZ Option $910.00 Electrical –
Communication/Radio 6 Motorola CDM 1250 Not Applicable NA Electrical –
Communication/Radio 7 Harris Mobile XG-25M Radio Option $3,896.00 Electrical –
Communication/Radio 8 DC Power Filter for Radio Wiring Option $384.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical –
Communication/Radio 9 Hand - Held Microphone Standard Included Electrical –
Communication/Radio 10 Public Address System with Boom Mic Standard Included Electrical –
Communication/Radio 11 Additional Flush Mounted Speakers (per Pair) Option $120.00 Electrical –
Communication/Radio 12 ASP930T Radio Antenna with RG58 Coax Cable and TNC Connector Option $130.00 Electrical –
Communication/Radio 13 Antenna Specialist ASP- 572 Option $130.00 Electrical –
Communication/Radio 14 Customer Specified Two Way Radio and Installation Option Quote Electrical –
Communication/Radio 15 GPS Antenna W/Gasket (Trimble 502 Model 18334 and Approved Equal) with RG58 Coax Cable and F Type Male Connector to the VLU Option $547.00 Electrical –
Communication/Radio 16 customer specific antenna, ground plane, and cable runs installation Option Quote Electrical –
Communication/Radio 17 Motorola APX4500 (Wifi capable version) Option $4,613.00 Electrical –
Communication/Radio 18 Motorola APX6500 Option $4,799.00 Electrical –
Communication/Radio 19 Motorola APX6500 (Wifi capable version) Option $5,985.00 Electrical –
Communication/Radio 20 Motorola XPR5550e Option $1,660.00 Electrical –
Communication/Radio 21 Harris Mobile XG-75M Radio Option $4,730.00 Electrical –
Communication/Radio 22 Harris Mobile XL-185M Radio Option $7,158.00 Electrical -
Destination Sign
Electrical – Destination Sign 1 Twin Vision Silver Series Sign (16 X160) Front & Side Deduction ($360.00) Electrical – Destination Sign 2 Twin Vision Silver Series Sign (24 X 200) Front & Side Option $298.00 Electrical – Destination Sign 3 Twin Vision Smart Series II (16 X160) Front & Side Not Applicable NAElectrical – Destination Sign 4 Twin Vision Smart Series II (24 X 200) Front & Side Not Applicable NAElectrical – Destination Sign 5 Twin Vision 100% Amber LED, Front, Curb Side, Rear Standard Included Electrical – Destination Sign 6 Twin Vision 100% Amber LED, Rear Standard IncludedElectrical – Destination Sign 7 Twin Vision Chroma I Color LED Front Not Applicable NAElectrical – Destination Sign 8 Twin Vision Chroma IV 100% Color LED Not Applicable NAElectrical – Destination Sign 9 Twin Vision 24 X 200 Front Amber LED Sign Option $540.00 Electrical – Destination Sign 10 Luminator SMT Horizon 100% Amber LED Front, Curbside, Rear Option $0.00 Electrical – Destination Sign 11 AXION with WI FI and Time and Date Time Stamp Not Applicable NA Electrical – Destination Sign 12 Luminator Spectrum 100% Amber LED Front ,Curbside, Rear Option $7,048.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Destination Sign 13 Luminator White LED Front, Curb-side and Rear Option $778.00 Electrical – Destination Sign 14 Add Twin Vision Smart Series II w/ rear camera, Rear Sign Not Applicable NAElectrical – Destination Sign 15 Add Street Side Sign (Twin Vision Amber LED) Option $1,230.00 Electrical – Destination Sign 16 Add Street Side Sign (Twin Silver Series LED) Option $1,250.00 Electrical – Destination Sign 17 Remove Rear Sign (DEDUCT) Deduction ($700.00) Electrical – Destination Sign 18 Program Software (Twin Vision) Option $379.00 Electrical – Destination Sign 19 Luminator Programming Software USB Wireless Option $1,000.00 Electrical – Destination Sign 20 Transign Curtain Front and Side Sign Not Applicable NA Electrical – Destination Sign 21 Heated Front Sign Glazing Option $214.00 Electrical – Destination Sign 22 Transign, (4) Character, Metal Housing Standard Included Electrical – Destination Sign 23 Transign, (3) Character, Metal Housing Option $0.00 Electrical – Destination Sign 24 Transign, (2) Character, D - 1 853, Metal Housing Option $0.00 Electrical – Destination Sign 25 Twin Vision Electronic Front Dash Sign Option $750.00 Electrical – Destination Sign 26 Hanover Display LED Amber Destination Signs (model# OL028, OL054 & OL64J, Front, Side & Rear) Option $231.00 Electrical – Destination Sign 27 Luminator Electronic Front Dash Sign Option $750.00 Electrical – Destination Sign 28 I/O controls Destination sign Amber (Front, Side & Rear & Dash) Option $1,125.00 Electrical – Destination Sign 29 DELETE Twin Vision Rear Sign Deduction ($700.00) Electrical – Destination Sign 30 ADD Twin Vision Rear Sign with built in Camera Option $1,250.00 Electrical – Destination Sign 31 Hanover Amber Front Sign size 200x24 (price on top of Hanover option) Option $719.00 Electrical – Destination Sign 32 Hanover dash sign Option $688.00 Electrical – Destination Sign 33 DELETE Transign, (4) Character, Metal Housing Deduction ($475.00) Electrical – Destination Sign 34 I/O controls Destination sign White LED (Front, Side & Rear & Dash) Option $1,606.00 Electrical -
Destination Sign
Programming
Electrical – Destination Sign
Programming 1 Luminator USB & Integrated Programing Software Option $414.00 Electrical – Destination Sign
Programming 2 Twin Vision Elyse 2 USB Option $350.00
Electrical – Destination Sign
Programming 3 Twin Vision Software Package Option $64.00 Other Option - Specify
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical - Diagnostics
Electrical – Diagnostics 1 Set of Multiplexing Diagnostics (Includes the 7 Following Items) Option $8,893.00 Electrical – Diagnostics 2 Incl w/set - Circuit Tester Incl with setElectrical – Diagnostics 3 Incl w/set - Program Loader Incl with setElectrical – Diagnostics 4 Incl w/set - Program Incl with setElectrical – Diagnostics 5 Incl w/set - ID Writer/Verification Incl with setElectrical – Diagnostics 6 Incl w/set - RS232/RS485 Converter Incl with setElectrical – Diagnostics 7 Incl w/set - Software, Real Time Ladder Logic Incl with setElectrical – Diagnostics 8 Incl w/set - Hand - Held Computer Incl with set Other Option - Specify
Electrical - Equipment
Storage Box
Electrical – Equipment
Storage Box
1 none Deduction ($400.00)
Electrical – Equipment
Storage Box 2 UTA APC Sensors, Cabling, CPU only Option $1,800.00 Electrical – Equipment
Storage Box 3 33"H X 20"D X 22.5"W, 13 - 42920F006 Not Applicable NA Electrical – Equipment
Storage Box 4 33"H X 20"D X 22.5"W, 13 - 42920F006, w/2 - Doors Not Applicable NA Electrical – Equipment
Storage Box 5 33"H X 20"D X 22.5"W, 13 - 42920F014, w/Louvered Back Panel Not Applicable NA Electrical – Equipment
Storage Box 6 Strategic Mapping sensors, cabling, CPU only Not Applicable NA Electrical – Equipment
Storage Box
7 44"H X 20"D X 22.5"W Standard Included
Electrical – Equipment
Storage Box 8 44"H X 20"D X 22.5"W, w/2- doors Option $130.00 Electrical - Lights,
Exterior
Electrical – Lights, Exterior 1 All Exterior Lights LED - Type Lamps Standard IncludedElectrical – Lights, Exterior 2 Headlight LED Dialight - Low Beam only Deduction ($250.00)Electrical – Lights, Exterior 3 Headlight LED Dialight - High Beam only Deduction ($250.00) Electrical – Lights, Exterior 4 Halogen Sealed Beam Headlights Deduction ($500.00) Electrical – Lights, Exterior 5 Tail Lights - Manufacturer Dialite LED, Fixture Size - 7" Diameter Option $90.00 Electrical – Lights, Exterior 6 Tail Lights - Manufacturer Dialite LED, Fixture Size - 4" Diameter Standard Included Other Option - Specify
Electrical - Intelligent
Vehicle Network
Electrical – Intelligent
Vehicle Network 1 none Standard Included
Electrical – Intelligent
Vehicle Network 2 Clever Devices IVN III W/Voice Annunciation, APC, Wireless LAN Option Quote DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Intelligent
Vehicle Network 3 AVAIL IVN W/MDC, GPS, APC, WLAN Option Quote Electrical – Intelligent
Vehicle Network 4 Init Voice Enunciator/AVL/GPS/APC/WLAN Option Quote Electrical – Intelligent
Vehicle Network 5 Siemens Transit Master Option Quote
Electrical – Intelligent
Vehicle Network 6 Transloc Transit Visualization System AVL Option Quote Electrical – Intelligent
Vehicle Network 7 Orbital TMS CAD/AVL System W/Voice Annunciation, APC Option Quote Electrical – Intelligent
Vehicle Network 8 Intelligent Vehicle System Prewire only Option Quote Electrical – Intelligent
Vehicle Network 9 Mapping and Database Setup for GPS per Customer Requirement Option Quote Electrical – Intelligent
Vehicle Network 10 Trimble "Button" Antenna Option $130.00 Electrical – Intelligent
Vehicle Network 11 Low Profile Blade Antenna Option $130.00 Electrical – Intelligent
Vehicle Network 12 Strategic Mapping IVN Option Quote
Electrical – Intelligent
Vehicle Network 13 Complete INIT on-board ITS system, CoPilot PC, APC, CAD/AVL, Visual/Voice Stop Enunciator, Emergency button Option Quote Other Option - Specify
Electrical -
Multiplexing
Electrical – Multiplexing 1 Dinex, I/O Controls G3 System Not Applicable NAElectrical – Multiplexing 2 I/O Controls Wireless RF Module Option $1,199.00 Electrical – Multiplexing 3 I/O Controls, Gateway Module (Included in the ITS Prewire Option) Option QuoteElectrical – Multiplexing 4 Vansco Not Applicable NAElectrical – Multiplexing 5 VDO Not Applicable NAElectrical – Multiplexing 6 Dinex, I/O Controls G4 System Standard Included Electrical - Pleasure
Electrical – Pleasure 1 none Standard IncludedElectrical – Pleasure 2 Radio Tacho Link Event Data Recorder Option $8,030.00 Electrical – Pleasure 3 Radio Not Applicable NAElectrical – Pleasure 4 Radio Am/FM/CD Option $380.00 Electrical - Pleasure 5 On-Board entertainment system including 6 video screen DVD CD-ROM player Not Applicable NAElectrical - Pleasure 6 On-Board entertainment system including 2 video screen DVD CD-ROM player Option $8,680.00 Electrical - Public
Announcement
Electrical – Public
Announcement 1 Drivers Speaker W/Separate Volume Control Option $80.00 Electrical – Public
Announcement 2 REI Model 750040 PA W/Handheld Mic W/(6) Flush Mounted Speakers Option $0.00 Electrical – Public
Announcement 3 Luminator IVS W/GPS Capability, w/LED Sign, W/O Mapping Not Applicable NA Electrical – Public
Announcement 4 DR700 Vehicle Logic Unit W/GPS Capability, w/LED Sign, W/O Mapping Option Quote Electrical – Public
Announcement 5 Clever Devises - Speakeasy II Option $2,330.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Public
Announcement 6 Rei Echo PA System Not Applicable NA
Electrical – Public
Announcement 7 Shure Brothers Lapel Microphone w/REI PA System Option $220.00 Electrical – Public
Announcement 8 Midwest Lapel Microphone (Use w/Voice Annunciation System) Option Quote Electrical – Public
Announcement 9 Interior LED Sign (part of ITS/AVA system Option Quote Electrical – Public
Announcement 10 One Additional Pair of Interior Speakers Option $100.00 Electrical – Public
Announcement 11 One Additional exterior Speaker Each Option $50.00 Electrical – Public
Announcement 12 REI w/switch mounted in Driver’s Area Standard Included Electrical – Public
Announcement 13 Hanover HTC AVA system including interior LED sign Option $6,533.00 Electrical - Video
Surveillance
Electrical – Video
Surveillance 1 none Base Included
Electrical – Video
Surveillance 2 Apollo RoadRunner DVR 2TB 4 Camera System w/Audio Option $4,399.00 Electrical – Video
Surveillance 3 Apollo RoadRunner DVR 2TB 8 Camera System w/Audio Option $5,575.00 Electrical – Video
Surveillance 4 Apollo RoadRunner DVR 2TB 12 Camera System w/Audio Option $7,464.00 Electrical – Video
Surveillance 5 Apollo RoadRunner DVR 2TB 16 Camera System w/Audio Option $8,547.00 Electrical – Video
Surveillance 6 Apollo RoadRunner HDR DVR 2TB 4 Camera System & Audio Option $5,512.00 Electrical – Video
Surveillance 7 Apollo RoadRunner HDR DVR 2TB 8 Camera System & Audio Option $8,547.00 Electrical – Video
Surveillance 8 Apollo RoadRunner HDR DVR 2TB 12 Camera System & Audio Option $10,939.00 Electrical – Video
Surveillance 9 Apollo RoadRunner HDR DVR 2TB 16 Camera System & Audio Option $13,783.00 Electrical – Video
Surveillance 10 Apollo Wireless Data Download capable Not Applicable NA Electrical – Video
Surveillance 11 Apollo Cellular "Live Look Through" Capable Not Applicable NA Electrical – Video
Surveillance 12 Apollo Vehicle Information Management System (ViM) Not Applicable NA Electrical – Video
Surveillance 13 Apollo video 4K DVR w/9 camera system w/ Audio Option $9,767.00 Electrical – Video
Surveillance 14 Cole Hersee 12063 Electrical Tow Connector Option $183.00 Electrical – Video
Surveillance 15 (4) Camera Pre Wire Package Option
Electrical – Video
Surveillance 16 SEON TX8 8 channel w/1 TB hard drive Not Applicable NA Electrical – Video
Surveillance 17 SEON DX-HD 13 channel w/1 TB hard drive Not Applicable NA Electrical – Video
Surveillance 18 SEON 2 TB hard drive upgrade Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 19 SEON WP00AG4 Explorer DX12 and DX-HD Smart-Link 12 VDC module to DVR cable, diagnostic indicator/alarm button & harness, GPS4 receiver mount. Not Applicable NA Electrical – Video
Surveillance 20 SEON CQ903A integrated IR Dome day/Night 600TVL interior camera, audio, 2.9 mm lens. Option $251.00 Electrical – Video
Surveillance 21 SEON CA904EI Day/Night 600TVL camera, exterior (w/infrared, no audio), 3.6 mm lens. Option $251.00 Electrical – Video
Surveillance 22 SEON CJ904A Dome Day/Night 600TVL camera, audio, 3.6mm lens w/mount Option $371.00 Electrical – Video
Surveillance 23 SEON CHW702EJ HD progressive scan camera, 16mm lens, exterior (no audio) and APPINJ POE injector w/mount. Option $527.00 Electrical – Video
Surveillance 24 SEON SRLGA07 Smart-Reach Lite, 2.4GHz Wireless bridge w/antenna Option $629.00 Electrical – Video
Surveillance 25 SEON HDD-STB Vmax View software, docking station & handheld mouse. Option $393.00 Electrical – Video
Surveillance 26 SEON LMK LCD monitor, 5.6 inch, AC charger, battery pack Option $333.00 Electrical – Video
Surveillance 27 Safety Vision RR6000 Pro w/(4) Digital Color Cameras, 120 GB DVR, w/Audio Not Applicable NA Electrical – Video
Surveillance 28 Angel Trax - 6 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 29 Angel Trax - 8 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 30 Angel Trax - 12 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-Fi ready Not Applicable NA Electrical – Video
Surveillance 31 Angel Trax -16 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-F- ready Not Applicable NA Electrical – Video
Surveillance 32 Angel Trax Upgrade to 1 Tb - Double Stacked 500 G HD Not Applicable NA Electrical – Video
Surveillance 33 Angel Trax Live View, Live GPS, and System Health Notification option Option $2,100.00 Electrical – Video
Surveillance 34 March Network (8) Camera System Not Applicable NA Electrical – Video
Surveillance 35 REI Bus Watch Digital Not Applicable NA Electrical – Video
Surveillance 36 TVSS Claim Safe III w/4 Digital Cameras Not Applicable NA Electrical – Video
Surveillance 37 Mobileview IV Digital, (5) Cameras, 250 GB DVR, w/Audio Not Applicable NA Electrical – Video
Surveillance 38 Mobilview PENTA DVR Not Applicable NA
Electrical – Video
Surveillance 39 Mobileview MV3000 DVR Not Applicable NA Electrical – Video
Surveillance 40 Rear View Camera System Option $1,280.00 Electrical – Video
Surveillance 41 Add Additional Color Camera Option $520.00 Electrical – Video
Surveillance 42 Central Station Mobileview (Kalatel) Not Applicable NA Electrical – Video
Surveillance 43 Verint 4 Camera System Not Applicable NA Electrical – Video
Surveillance 44 Verint 5 Camera System Not Applicable NA Electrical – Video
Surveillance 45 Video Test Kit Mobileview IV - Kalatal Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 46 Desk Top Viewing Station (REI) Not Applicable NA Electrical – Video
Surveillance 47 Velvac Hyperion Virtual DVR (up to 7 camera views through dash mounted tablet) Not Applicable NA Electrical – Video
Surveillance 48 Apollo Embedded WIFI for DVR Option $424.00 Electrical – Video
Surveillance 49 Apollo Wireless LAN Router/Antenna Option $769.00 Electrical – Video
Surveillance 50 Apollo LTE Cellular/Wifi Router/Antenna Option $1,564.00 Electrical – Video
Surveillance 51 Additional storage 4.0TB HDD IPO 2TB Option $373.00 Electrical – Video
Surveillance 52 Additional storage 8.0TB HDD IPO 2TB Option $653.00 Electrical – Video
Surveillance 53 Additional storage 10.0TB HDD IPO 2TB Option $793.00 Electrical – Video
Surveillance 54 Apollo Monitor 8" Option $599.00
Electrical – Video
Surveillance 55 Apollo Monitor 10" Option $649.00
Electrical – Video
Surveillance 56 Apollo Monitor 15" Option $849.00
Electrical – Video
Surveillance 57 Apollo Monitor 17" Option $1,099.00
Electrical – Video
Surveillance 58 Apollo Vehicle Information Management System (ViM) Base Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 59 Apollo Vehicle Information Management System (ViM) Health Single Server License Option $5,599.00 Electrical – Video
Surveillance 60 Apollo Vehicle Information Management System (ViM) Location Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 61 Apollo Vehicle Information Management System (ViM) Smartclip Software Single Server License Option $8,399.00 Electrical – Video
Surveillance 62 Apollo Vehicle Information Management System (ViM) Streaming Video Software Single Server License Option $5,599.00 Electrical – Video
Surveillance 63 Apollo Vehicle Information Management System (ViM) Health Single Vehicle License Option $279.00 Electrical – Video
Surveillance 64 Apollo Vehicle Information Management System (ViM) Location Single Vehicle License Option $279.00 Electrical – Video
Surveillance 65 Apollo Vehicle Information Management System (ViM) Smartclip Single Vehicle License Option $419.00 Electrical – Video
Surveillance 66 Apollo Vehicle Information Management System (ViM) Streaming Video Single Vehicle License Option $279.00 Electrical – Video
Surveillance 67 SEON TH8 8 channel w/2 TB hard drive Option $10,341.00 Electrical – Video
Surveillance 68 Angel Trax - 6 HD/IR Vulcan series 6 MDVR Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $3,513.00 Electrical – Video
Surveillance 69 Angel Trax - 8 HD/IR Vulcan NVR Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $6,646.00 Electrical – Video
Surveillance 70 Angel Trax - 12 HD/IR Vulcan Hybrid NVR-1200 Camera System - 2.0TB HD Storage with SD Card Backup and Wi-Fi ready Option $8,641.00 Electrical – Video
Surveillance 71 Angel Trax -16 HD/IR Vulcan Hybrid NVR-1600 Camera System - 2.0TB HD Storage with SD Card Backup and Wi-F- ready Option $11,317.00 Electrical – Video
Surveillance 72
March Networks - RideSafe GT08: 8 Standard [Analog] Definition Color Camera System, 1TB SSD,
Wireless, Accelerometer/Impact Sensor
Option $4,151.00
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 73
March Networks - RideSafe GT12: 4 High [IP] & 8 Standard [Analog] Definition Color Camera System, 2TB
SSD, Wireless, Accelerometer/Impact Sensor
Option $6,373.00
Electrical – Video
Surveillance 74
March Networks - RideSafe GT16: 8 High [IP] & 8 Standard [Analog] Definition Color Camera System, 2TB
SSD, Wireless, Accelerometer/Impact Sensor
Option $7,107.00
Electrical – Video
Surveillance 75
March Networks - RideSafe GT20: 12 High [IP] & 8 Standard [Analog] Definition Color Camera System,
2TB SSD, Wireless, Accelerometer/Impact Sensor
Option $7,813.00
Electrical – Video
Surveillance 76 March Networks - Add (1) High [IP] Definition 360 Interior Camera Option $616.00 Electrical – Video
Surveillance 77 REI Bus Watch Digital HD5-1200 12 CH WIFI GPS with 10 cameras 2.0TB HD, G- Force Sensor Option $7,941.00 Engine - Accessories
Engine – Accessories 1 Cummins Compucheck Fittings for (Air, Oil, Fuel & Coolant Testing) Option Diesel Only $94.00 Engine – Accessories 2 Williams Controls 41 Degree Throttle Pedal Standard Diesel Only IncludedEngine – Accessories 3 Williams Controls 45 Degree Throttle Pedal Standard Diesel Only IncludedEngine – Accessories 4 Teleflex (Kongsberg) Adjustable Throttle and Brake Pedal Option Diesel Only $1,130.00 Engine – Accessories 5 STD Donaldson (RBX00- 2277) - Air Intake Restriction Standard Diesel Only IncludedEngine – Accessories 6 Ashcraft (25-1490a02L) - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 7 Filterminder # SP - 3832 - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 8 Donaldson Informer - Air Intake Restriction Option Diesel Only $0.00 Engine – Accessories 9 Spin on Filters Supplied By Engine Manufacturer Standard Diesel Only IncludedEngine – Accessories 10 By Pass Filter - Spinner - Bypass Model 976 Option Diesel Only $1,010.00 Engine – Accessories 11 Sample Test Port - Titan Probalizer OD-1014 Diesel Only $60.00 Engine – Accessories 12 FEMCO Oil Drain Plug Option Diesel Only $75.00 Engine – Accessories 13 Magnetic Drain Plug Standard Diesel Only IncludedEngine – Accessories 14 Test Ports Shall Be Provided for Commonly Checked Functions on the Bus Standard Diesel Only IncludedEngine – Accessories 16 Rear Run Box Starter - Delco MT 42 - 24v Electric Standard Diesel Only IncludedEngine – Accessories 17 Rear Run Box Standard Diesel Only IncludedEngine – Accessories 18 Rear Run Box Rear Hand Throttle Option Diesel Only $134.00 Engine – Accessories 19 Rear Run Box Engine Hour Meter Option Diesel Only $50.00 Engine – Accessories 20 Rear Run Box A/C Hour Meter Option Diesel Only $50.00 Engine – Accessories 21 Rear Run Box Voltmeter J1939 Option Diesel Only $50.00 Engine – Accessories 22 Rear Run Box Oil Pressure Gauge J1939 Option Diesel Only $50.00 Engine – Accessories 23 Rear Run Box Coolant Gauge J1939 Option Diesel Only $50.00 Engine – Accessories 24 Mechanical Gauges - Murphy Oil Pressure and Coolant Temperature Option Diesel Only $196.00 Engine - Accessories 25 Adjustable brake and accelerator pedals (minimum 3 in.) Option Diesel Only $1,130.00 Engine – Accessories 26 Rear Run Box Programmable Forster Gauge Option Diesel Only $150.00 Engine - Diagnostics
Engine – Diagnostics 1 Cummins Inline 6 Adapter Kit, Insite Basic Option Diesel Only $1,373.00 Engine – Diagnostics 2 Cummins Quickserve Online 1 Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 3 Cummins Quickserve Online each Additional Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 4 Cummins INSITE Diagnostic Program 1 Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 5 Cummins INSITE Diagnostic Program each Additional Year Subscription Option Diesel Only $1,040.00 Engine – Diagnostics 6 ISL G Fold Up Wiring Diagram Not Applicable Diesel Only NA Other Option - Specify
Engine - Tune Up Kit
Engine – Tune Up Kit 1 Cummins Tune - Up Kit (Includes the Following) Option $7,580.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Engine – Tune Up Kit 2 Includes - Pressure Gauge incl with kit Engine – Tune Up Kit 3 Includes - Torque Wrench incl with kitEngine – Tune Up Kit 4 Includes - Oil Filter Wrench incl with kitEngine – Tune Up Kit 5 Includes - Engine Coolant & Fuel Wrench incl with kitEngine – Tune Up Kit 6 Includes - Belt Tension Gauge incl with kitEngine – Tune Up Kit 7 Includes - Belt Tension Gauge incl with kitEngine – Tune Up Kit 8 Includes - Charge- A/C CAC Pressure Kit incl with kitEngine – Tune Up Kit 9 Includes - Engine Barring Gear incl with kitEngine – Tune Up Kit 10 Includes - Torque Wrench incl with kitEngine – Tune Up Kit 11 Includes - Roller Follower Rem. & Installation Tool incl with kitEngine – Tune Up Kit 12 Includes - Compucheck Fitting incl with kit Other Option - Specify
Fare Box
Fare Box 1 No Fare box, Power Circuit and Ground strap only Standard IncludedFare Box 2 GFI 36" Fastfare Option $13,781.00 Fare Box 3 GFI 36" Odyssey Option $13,781.00 Fare Box 4 GFI 41" Fast Fare Option $13,781.00 Fare Box 5 GFI 41" Odyssey Option $13,781.00 Fare Box 6 Diamond Model H w/Two (2) Vaults Option $2,225.00 Fare Box 7 Diamond Model SV w/Two (2) Vaults Option $1,325.00 Fare Box 8 Main T1 Fare box w/Two V1 Vaults in Standard Paint Colors Not Applicable NAFare Box 9 Main M 4 Fare box w/Two V4 Vaults in Standard Paint Colors Not Applicable NAFare Box 10 Main SL 5 Fare box w/Two V5 Vaults in Standard Paint Colors Not Applicable NAFare Box 11 Cubic Fare box Option QuoteFare Box 12 Denominator Manual Passenger Counter (Rows X Tallies X $32) Option $32.00 Fare Box 13 Globe Transfer Cutter Option $63.00 Fare Box 14 Add TRiM to Fast Fare Option $5,644.00 Fare Box 15 Add Smart Card Reader to Fast Fare Option $748.00 Fare Box 16 Add Barecode Reader to Fast Fare Option $721.00 Fare Box 17 Add TRiM to Odyessey Option $5,216.00 Fare Box 18 Add Smart Card Reader to Odyssey Option $669.00 HVAC
HVAC 1 Thermo King System (Per Technical Specification) Standard IncludedHVAC 2 TK Intelligaire 3 W/X 616 Compressor, R134A, Reliance Brushless Cond. & Evap.

Motors Option $3,000.00
HVAC 3 TK System w/General Electric Field Wound Motors (Cond & Evap) Deduction ($2,000.00) HVAC 4 TK System w/General Electric P.M. Motors Deduction ($1,300.00)HVAC 5 TK System w/X430Compressor Deduction ($900.00)HVAC 6 TK System w/S391 Screw Compressor Standard IncludedHVAC 7 TK System w/S616 Screw Compressor Option $3,000.00 HVAC 8 TK Electric HVAC System TEA14 (including alternator for Diesel buses) Option $14,495.00 HVAC 9 TK Pressure and Return Gauges Mounted to Unit Option $356.00 HVAC 10 R407c Refrigerant Option $322.00 HVAC 11 MCC Drivers Heater W/Brushless Motors Standard IncludedHVAC 12 MCC Drivers Heater W/Brush Motors Deduction ($387.00)HVAC 13 MCC Front Stepwell/Threshold Heater W/Brushless Motor (Each) Option $324.00 HVAC 14 MCC Underseat/Rear Stepwell Heater W/Brushless Motor (Each) Option $458.00 HVAC 15 MCC Underseat/Rear Stepwell Heater W/Brush Motor (Each) Not Applicable NAHVAC 16 Sutrak All Electric Air Conditioning - Roof Mount Not Applicable NAHVAC 17 Sutrak All Electric Air Conditioning - Rear Mount (Diesel & CNG only) Not Applicable NAHVAC 18 ACT Convection Heater Not Applicable NAHVAC 19 ACT Espar Fuel-Fired Supplemental Coolant Heater Not Applicable NAHVAC 20 Warm Welcome Mat (Rear Door) Option $282.00 HVAC 21 Warm Welcome Mat (Installed on W/C Ramp) Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 HVAC 22 Eberspacher AC 136 G3 AE Not Applicable NA
HVAC 23 Air Purification System (Climate Comfort Technologies CCT-24 unit) Option $2,188.00 HVAC 24 TK Electric HVAC System TE14 (For BAE Hybrid buses only) Option $1,160.00 HVAC 25 TK Electric HVAC System TE18 (For BEB buses only) Standard IncludedHVAC 26 Sutrak All Electric Air Conditioning - Rear Mount (Diesel only) Option $15,948.00 HVAC Special Purpose
HVAC Special Purpose 1 TK Intelligaire - Diagnostics Option $1,709.00 HVAC Special Purpose 2 Carrier Micromax ATE Diagnostics Not Applicable NAHVAC Special Purpose 3 Webasto Diagnostic Tool Option $494.00 HVAC Special Purpose 4 Van Steenburgh Regional Recovery System (JV90- 1) Option $10,138.00 HVAC Special Purpose 5 Eberspacher diagnostics Not Applicable NA Other Option - Specify
Manuals
Manuals 1 Drivers Handbook (1 Manual/1 CD per Bus Order) Standard IncludedManuals 2 Service Manual (1 Manual/1 CD per Bus Order Standard IncludedManuals 3 Parts Manual (1 Manual/1CD per Bus Order) Standard IncludedManuals 4 Electrical Schematics (1 Manual/1CD per Bus Order) Standard IncludedManuals 5 Vendor Manuals (1 Manual/1 CD per Bus Order) Standard IncludedManuals 6 Additional Driver's Handbook Option $10.00 Manuals 8 Additional Parts Manuals Option $70.00 Manuals 9 Additional Electrical Schematics Option $70.00 Manuals 10 Additional Electrical Multiplex Option $15.00 Manuals 11 Additional Cummins ISL Manuals (4 Books) Option $515.00 Manuals 12 Additional Allison B400 Manuals (6 Books) Option $400.00 Manuals 13 Additional ZF 6hp594 Manuals (5 Books) Option $400.00 Manuals 14 Additional Voith Manuals (7 Books) Option $400.00 Manuals 15 Additional Amerex Manuals Option $50.00 Manuals 16 Additional TRW Steering Gear Manuals Option $30.00 Manuals 17 Additional Thermo King Manual Option $30.00 Manuals 18 Additional Carrier HVAC Manuals (2 Books) Option $30.00 Other Option - Specify
Safety
Safety 2 Amerex V-25lb ABC System Standard Diesel & Hybrid IncludedSafety 3 Amerex VH-25lb ABC Cylinder Not Applicable NASafety 4 Amerex V-30lb ABC Cylinder Not Applicable NASafety 5 Amerex Fire Suppression System w/Automatic Shutdown, Programmable Heat Detectors (PHDs) and Automatic Maintenance Testing (AMT) Not Applicable NA Safety 6 Amerex Safety Net 2-Zone Fire Detection/Suppression System Not Applicable NASafety 7 Jomar Firestick Liquid Not Applicable NASafety 8 Kidde - Dual Spectrum Option $333.00 Safety 9 Kidde - Ltd Spectrum Option $233.00 Safety 10 Kidde TLSE Spectrum Not Applicable NASafety 11 Fogmaker Fire Suppression System (water mist) Option $1,248.00 Safety 14 Firetrace Automatic Fire Detection/Suppression System (gas detection base system) Not Applicable NASafety 15 Remove Amerex Deduction ($2,099.00)Safety 16 Fire Extinguisher and Safety Triangle Kit Standard IncludedSafety 17 Twenty - Four Unit First Aid Kit Option $69.00 Safety 18 Ten Unit First Aid Kit Not Applicable NASafety 19 Blood Borne Pathogens Kit Option $35.00 Safety 20 Bio - Hazard Disposal Kit Option $35.00 Safety 21 High Temperature Protective Sleeves for Component Lines Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Safety 22 (3) 20 - Minute Road Flares Not Applicable NA Safety 23 Wheel Chocks (Per Set) Option $35.00 Safety 24 Electric - Standard no fire suppression Standard IncludedSafety 25 Amerex Safety Net with Methane Detection ABC System Standard CNG only IncludedSafety 26 Fogmaker Fire Suppression System w/Methane Detection (water mist) Option CNG only $678.00 Steering
Steering 1 Ross Model TS 65 Not Applicable NASteering 2 Sheppard Model M110 Not Applicable NASteering 3 TRW Electric Assisted Steering Option $2,494.00 Steering 4 TRW TAS6505 Standard IncludedSteering 5 Standard Size Padded Steering Wheel Standard IncludedSteering 6 Douglas Autotech 'Double-Knuckle' Steering Column (PN 9003148-C) Option $1,200.00 Other Option - Specify
Towing & Hoisting
Towing & Hoisting 1 Set Towing Adapters/Tow Bar Option $2,667.00 Towing & Hoisting 2 Set of Hoist Adapters (Includes the 4 Following Items) Option $3,883.00 Towing & Hoisting 3 Incl w/set - Front Saddle incl with setTowing & Hoisting 4 Incl w/set - Front Adapters incl with setTowing & Hoisting 5 Incl w/set - Rear Saddle incl with setTowing & Hoisting 6 Incl w/set - Rear Adapters incl with setTowing & Hoisting 7 Front towing point Not Applicable NATowing & Hoisting 8 Rear towing point Not Applicable NA Other Option - Specify
Training
Training 1 none Standard $0.00 Training 2 Operator Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 3 Operator Orientation - 8 Hours, (Procuring Agency) Standard $0.00 Training 4 Operator Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 5 Maintenance Orientation - 4 Hours, (Procuring Agency) Standard $0.00 Training 6 Maintenance Orientation - 24 Hours, (Procuring Agency) Option $5,000.00 Training 7 Maintenance Orientation - 32 Hours, (Procuring Agency) Not Applicable NATraining 8 Maintenance Orientation - Additional hours of training, per 24hr module Option $5,000.00 Training 9 Technical Training - 96 Hours, (Procuring Agency) Price Proposal Form Option $20,000.00 Training 10 Technical Training - Additional hours of training, per 24hr module Option $5,000.00 Training 11 OEM Training - Two Slots for "Train the Trainers" Technical Instruction; PER DAY Option $900.00 Training 12 OEM Training - Additional Slots for "Train the Trainers" Technical Instruction; PER DAY PER ADD'L STUDENT Option $450.00 Training 13 Body, Chassis, Suspension and Steering - (8 Hour Class), Procuring Agency Not Applicable NATraining 14 Body, Chassis, Suspension and Steering - (24 Hour Class), Procuring Agency Option $5,000.00 Training 15 Body, Chassis, Suspension and Steering - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 16 Electrical and Electronics - (8 Hour Class), Procuring Agency Training 17 Electrical and Electronics - (24 Hour Class), Procuring Agency Option $5,000.00 Training 18 Electrical and Electronics - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 Training 19 Air and Brake Systems - (24 Hour Class), Procuring Agency Option $5,000.00 Training 20 Air and Brake Systems - (8 Hour Class), Procuring Agency Not Applicable NATraining 21 Air and Brake Systems - Additional hours of training per 24hr module, Procuring Agency Option $5,000.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 22 HVAC and Climate Controls - (4 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 23 HVAC and Climate Controls - (8 Hour Class), Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 24 HVAC and Climate Controls - Additional hours of training per hour, Procuring Agency; Price is Per Student Per Day (minimum 7 students) Option $1,750.00 Training 25 Engine - (8 Hour Class), per Student at Procuring Agency Option $450.00 Training 26 Engine - (24 Hour Class), per Student at Procuring Agency Option $1,350.00 Training 27 Engine - additional hour of training per hour, per Student at Procuring Agency Option QuoteTraining 28 Transmission - (8 Hour Class), per Student, at Procuring Agency Option $450.00 Training 29 Transmission - (24 Hour Class), per Student, at Procuring Agency Option $1,350.00 Training 30 Transmission - Additional hour of training per hour, per Student, at Procuring Agency Option QuoteTraining 31 Wheelchair Ramp - (2 Hour Class), at Procuring Agency Not Applicable NATraining 32 Wheelchair Ramp - (4 Hour Class), at Procuring Agency Standard $0.00 Training 33 Wheelchair Ramp - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 34 Destination Sign - (4 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 35 Destination Sign - (8 Hour Class), at Procuring Agency; Remote Training Standard $0.00 Training 36 Destination Sign - Additional hour of training per hour, at Procuring Agency Not Applicable NA Training 38 Axles and Tires - Procuring Agency. Included in Body/Chassis Option $5,000.00 Training 39 Fire Suppression - (4 Hour Class), at Procuring Agency Standard $0.00 Training 40 Fire Suppression - (8 Hour Class), at Procuring Agency Standard $0.00 Training 41 Fire Suppression - Additional hour of training per hour, at Procuring Agency Not Applicable NATraining 42 Engine OEM Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 43 Engine OEM Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 44 Engine OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 45 Transmission Training (8 Hour Class, Per Person), at Local Dealer Option $450.00 Training 46 Transmission Training (24 Hour Class, Per Person), at Local Dealer Option $1,350.00 Training 47 Transmission Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 48 Data Communications System OEM Training (4 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 49 Data Communications System OEM Training (8 Hour Class, Per Person), at Local Dealer Not Applicable NATraining 50 Data Communications System OEM Training (Additional hour of training per hour, 2 Persons), at Local Dealer Not Applicable NA Training 51 Hybrid Drive - (8 Hour Class), at Procuring Agency Option $3,500.00 Training 52 Hybrid Drive - (24 Hour Class), at Procuring Agency Option $10,500.00 Training 53 Hybrid Drive - (Additional hour of training per hour), at Procuring Agency Not Applicable NATraining 54 Hybrid Drive OEM Training (8 Hour Class, Per Person), at Local Dealer Option $3,500.00 Training 55 Hybrid Drive OEM Training (24 Hour Class, Per Person), at Local Dealer Option $10,500.00 Training 56 Hybrid Drive OEM Training (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 57 Hybrid Transmission Training - (8 Hour Class, Per Person), at Local Dealer Option $3,500.00 Training 58 Hybrid Transmission Training - (24 Hour Class, Per Person), at Local Dealer Option $10,500.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 59 Hybrid Transmission Training - (Additional hour of training per hour, Per Person), at Local Dealer Not Applicable NA Training 60 Additional training …
Other Option - Specify
Training Equipment
Modules
Training Equipment Modules 1 Fare Collection OEM Training (up to 10), 4 Day At Local Dealer Not Applicable NA Training Equipment Modules 2 ISL/Voith D864.5 Not Applicable NA Training Equipment Modules 3 ISL/ZF 6AP1400B Not Applicable NATraining Equipment Modules 4 ISL/ZF HP594 Not Applicable NATraining Equipment Modules 5 ISX 12 G Not Applicable NA Training Equipment Modules 6 ISL G Not Applicable NATraining Equipment Modules 7 HVAC Training Module Option $43,213.00 Training Equipment Modules 8 I/O Controls Multiplex Board Option $17,750.00 Training Equipment Modules 9 Air Brake Training Board Option $35,938.00 Training Equipment Modules 10 ISB 6.7 Not Applicable NATraining Equipment Modules 11 ISL/B400R Power Plant Not Applicable NA Training Equipment Modules 12 L9/Voith D864.5 Training Module Option $198,114.00 Training Equipment Modules 13 L9/ZF 6AP1400B Training Module Option $194,647.00 Training Equipment Modules 14 L9N (CNG) Option $67,433.00 Training Equipment Modules 15 B6.7 (Hybrid engine) Option $50,369.00 Training Equipment Modules 16 L9/B400R Training Module Option $198,665.00 Training Equipment Modules 17 L9/B400R Power Plant Option $76,536.00 Training Equipment Modules 18 L9/Voith D864.5 Power Plant Option $74,950.00 Training Equipment Modules 19 L9/ZF 6AP1400B Power Plant Option $74,885.00 Training Equipment Modules 20 Fare Collection OEM Training (up to 10), 4 Day At Customer Site Option $7,495.00 Transmission
Transmission 1 Allison B- 400R, GEN IV Standard IncludedTransmission 2 Allison B- 500R, GEN IV Not Applicable NATransmission 3 Allison B- 500, GEN V Not Applicable NATransmission 4 Allison B- 500R, GEN V Not Applicable NATransmission 5 Voith D854.6 Option ($3,118.00)Transmission 6 ZF 6AP1400B Option ($2,973.00)Transmission 7 ZF 6HP594 Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Transmission 8 "Transynd" Synthetic Standard Included
Transmission 9 Titan Probalizer OD- 1014 Option $34.00 Transmission 10 Davco Electronic Fluid Level Gauge Option $134.00 Transmission 11 Keyed Transmission Lockout Switch on Dash Option $351.00 Transmission 12 Transmission Oil Temperature Gauge (Dash and Rear Run Box) Option $100.00 Transmission 13 Electric Transmission - 2 speed Not Applicable NATransmission 14 Electric Transmission - 4 speed Not Applicable NA Other Option - Specify
Transmission
Diagnostics
Transmission Diagnostics 1 Allison Cable & Software Option $2,353.00 Transmission Diagnostics 2 Voith Cable & Software Option $1,254.00 Transmission Diagnostics 3 Voith Service Tool Kit Not Applicable NATransmission Diagnostics 4 Set of ZF Diagnostics (Includes the 3 Following Items) Option $3,248.00 Transmission Diagnostics 5 Includes - Testman Diagnostic System incl with setTransmission Diagnostics 6 Includes - SAE Cable incl with setTransmission Diagnostics 7 Includes - Ecomat Testman Software incl with set Other Option - Specify
W/C Restraints
W/C Restraints 1 AMSECO - A.R.M. Standard IncludedW/C Restraints 2 AMSECO Reliant Mobility Aid Securement System Not Applicable NAW/C Restraints 3 AMESCO Passive rear-facing restraints (rear facing barriers) per ADA location Option $833.00 W/C Restraints 4 USSC - First Option $0.00 W/C Restraints 5 Freedman - First Option $0.00 W/C Restraints 6 Q'Straint - QRT Standard IncludedW/C Restraints 7 Q'Straint - ORT 360 per ADA location Option $281.00 W/C Restraints 8 Q'Straint - Q'UBE 3- Point Securement Station per ADA location Option $104.00 W/C Restraints 9 Q'Straint - Quantum Securement System per ADA location Option $10,588.00 W/C Restraints 10 Q'Strant/Sure-Lok - OMNI Floor Anchor System per ADA location Option $113.00 W/C Restraints 11 Q’Straint Slide N Click floor mount restraint system per ADA location Option $0.00 W/C Restraints 12 USSC/Freedman Q- Pod W/C Restraint System per ADA location Option $3,950.00 W/C Restraints 13 AMESCO Dual Auto Lock W/C Restraint System per ADA location Option $91.00 W/C Restraints 14 USSC - V- PRO Option $0.00 W/C Restraints 15 Sure LOK - RTT Electric Not Applicable NAW/C Restraints 16 Sure LOK - RTT Manual Not Applicable NAW/C Restraints 17 Additional L-track per/foot Not Applicable NAW/C Restraints 18 RESNA WC18 compliant restraint Not Applicable NAW/C Restraints 19 RESNA WC19 compliant restraint Not Applicable NAW/C Restraints 20 AMSECO Q- Pod W/C Restraint System per ADA location Option $3,755.00 Wheel Chair Ramp
(low-floor only) / Lift
(high-floor only)
Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 1 Lift- U Model LU11, 1:6 Ratio, Front Door only Deduction ($175.00) Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 2 LIFT- U Model LU18, Dual- Mode 1:6 (Street)/1:8 (Sidewalk) Standard Included Wheel Chair Ramp (low-floor
only) / Lift (high-floor only) 3 Ricon 6:1 SA Self-Leveling Ramp Option $1,269.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Wheel - Brakes
Wheel – Brakes 1 S - Cam Drum w/Wabsco ABS System - (DEDUCT) Deduction ($2,400.00)Wheel – Brakes 2 Front Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes 3 Rear Wheel Drum Brakes - (DEDUCT) Not Applicable NAWheel – Brakes All Wheel Drum Brakes Deduction ($2,400.00)Wheel – Brakes 4 MGM “E-Stroke” Electronic Brake Monitoring System – Disc Brakes Option $1,845.00 Wheel – Brakes 5 MGM “E-Stroke” Electronic Brake monitoring System – Drum Brakes Option $1,879.00 Wheel – Brakes 6 All Wheel Disc Brakes Standard Included Other Option - Specify
Wheel - Hubometer
Wheel Hubometer 1 none Standard IncludedWheel Hubometer 2 Veeder Root w/o Tenths w/o Guard Option $72.00 Wheel Hubometer 3 S&A Fleetwatch 392 Electronic Option $436.00 Wheel Hubometer 4 E J Ward Data System (Includes Receiver, Display Unit and Antenna) Option QuoteWheel Hubometer 5 Engler (Stemco) Mechanical W/o Tenths W/o Guard Option $79.00 Wheel Hubometer 6 Engler Hubometer W/Powder Coat Guard Option $204.00 Other Option - Specify
Wheel - Hubs
Wheel Hubs 1 Hub Piloted Wheels and Axles W/Grease Seals Standard IncludedWheel Hubs 2 Hub Piloted w/Oil Seals (per Axle) Option $0.00 Wheel Hubs 3 Stud Piloted Wheels and Axles w/Grease Seals Option $395.00 Wheel Hubs 4 Stud Piloted Wheels and Axles w/Oil Seals Option $395.00 Wheel Hubs 5 Wabco Traction Control Standard IncludedWheel Hubs 6 Hydraulic drop down snow chain system Option Quote Other Option - Specify
Wheel - Tires
Wheel – Tires 1 Customer Supplied Standard IncludedWheel – Tires 2 Michelin XZU2 (305/85R/22.5) Not Applicable NAWheel – Tires 3 Michelin XZU2 (305/70R/22.5) Not Applicable NAWheel – Tires 4 Michelin X incity Z (305/70R/22.5) (7 tires per bus) Option $4,375.00 Wheel – Tires 5 Michelin XZU3 (305/85/22.5) Not Applicable NAWheel – Tires 6 Michelin XZU2 (275/70R/22.5) Not Applicable NAWheel – Tires 7 Michelin XZE2+(H) (295/80/R22.5) (7 tires per bus) Option $5,586.00 Wheel – Tires 8 G152 (305/85R/22.5) (7 tires per bus) Option $5,432.00 Wheel – Tires 9 Goodyear G152 (305/70R/22.5) (7 tires per bus) Option $4,900.00 Wheel – Tires 10 Goodyear G152 (275/70R/22.5) (7 tires per bus) Not Applicable NAWheel – Tires 11 Firestone 18J (315/80R/22.5) (7 tires per bus) Option $5,012.00 Wheel – Tires 12 Firestone 16H (305/70R/22.5) (7 tires per bus) Option $4,823.00 Wheel – Tires 13 Bridgestone 16H (275/70R/22.5) (7 tires per bus) Not Applicable NAWheel – Tires 14 Tire Pressure Monitoring System Option $1,163.00 Wheel – Tires 15 Michelin X incity (305/85R/22.5) (7 tires per bus) Option $4,865.00 Wheels
Wheels 1 (7) Powder Coated Steel Wheels (White and Black) Standard IncludedWheels 2 (7) Aluminum Alcoa - Full Polish Option $1,277.00 Wheels 3 (7) Aluminum Alcoa - Full Polish W/Dura Bright Finish Option $1,756.00 Wheels 4 (7) Aluminum Alcoa - Machine Finish Option $790.00 Wheels 5 (7) Aluminum Alcoa - Machine Finish W/Dura Bright Finish Option $1,294.00 Wheels 6 Remove Spare Wheel Deduction ($151.00)Wheels 7 Add Dura Flange to Alcoa (Per Wheel) Option $173.00 Other Option - Specify
Windows
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Windows 2 Arow Laminated Safety Glass (1/4") - Framed Sliders Option $654.00 Windows 3 Arow Laminated Safety Glass (1/4") - Framed Fixed Option ($1,043.00)Windows 4 Arow Laminated Safety Glass (1/4") - Framed Transom - openable Standard IncludedWindows 5 Arow Hidden Framed Bonded - Fixed Option $2,625.00 Windows 6 Arow Hidden Framed Bonded - Transom -openable Option $4,486.00 Windows 7 Add Window Guards per bus (Acrylic Liner and Film) Option $938.00 Windows 8 anti-graffiti 3M film single layer (per inside window) Not Applicable NAWindows 9 Stormite flush-mount serviceable w/tip Not Applicable NAWindows 10 All windows equipped with liners attached Not Applicable NAWindows 11 Ricon Hidden Framed Bonded - Fixed Option $716.00 Windows 12 Ricon Hidden Framed Bonded - Transom -openable Option $3,983.00 Windows 13 anti-graffiti 3M film 4-layer (per bus, Ricon Only) Option $5,250.00 Windows 14 anti-graffiti 3M film 4-layer (per bus, Arow Only) Option $3,438.00 Windows 15 anti-graffiti 3M film single layer (per bus) Option $1,250.00 Other Items
Other Items 1 Brake System Diagnostics Not Applicable NAOther Items 2 Meritor Software (Tool Box), Serial Link/Interface Kit Option $432.00 Other Items 3 Engine Dolly Option $5,533.00 Other Items 4 Phillips Thermo Block Heater Option $140.00 Other Items 5 Engine Skid Protection Option $377.00 Other Items 6 Mobile Receiver for S&A 392 Hubometer Option $436.00 Other Items 7 Floor Mounted 4 -Way Flasher Switch Standard IncludedOther Items 8 Cup Holder Option $35.00 Other Items 9 Auxiliary Drivers Fan Option $89.00 Other Items 10 Stainless Steel Trash Bag Holder Option $170.00 Other Items 11 Transfer Cutter Option $63.00 Other Items 12 Keyed Ignition Switch Option $120.00 Other Items 13 Fiber Optic Backlighting on Drivers Dash Option $850.00 Other Items 14 Exterior Ad Frame - Front 21" X 40" Option $175.00 Other Items 15 Exterior Ad Frame - Curbside 30" X 88" Option $283.00 Other Items 16 Exterior Ad Frame -Streetside 30" X 144" Option $335.00 Other Items 17 Exterior Ad Frame Rear 21" X 72" Option $226.00 Other Items 18 I/O Controls LED Interior Lights Standard IncludedOther Items 19 Pretoria LED Interior Lights Option $0.00 Other Items 20 See II Transit Airfoil Not Applicable NAOther Items 21 Open Bottom Racks Option QuoteOther Items 22 Suburban Package Racks/Open Bottom Option QuoteOther Items 23 Twin Automatic Greasing System Not Applicable NAOther Items 24 EMCO -Wheaton Posi -Lock Nozzle Standard IncludedOther Items 25 Hybrid Drive Tools Not Applicable NAOther Items 26 Special Purpose Hybrid Drive Tool Kit Option $38,661.00 Other Items 27 BAE (APS2) beltless power pack Option $38,667.00 Other Items 28 WABCO E-COMP Not Applicable NAOther Items 29 ISB 6.7 Fold Up Wiring Diagram (hybrid option) Option $35.00 Other Items 30 Allison Hybrid Manuals Option $75.00 Other Items 31 BAE Hybrid Manuals Option $55.00 Other Items 32 Allison Mid-Life Overhaul Parts List and Cost Not Applicable NAOther Items 33 BAE Mid-Life Overhaul Part List and Cost Not Applicable NAOther Items 34 winter weather package (heated front entrance) Not Applicable NAOther Items 35 First Aid kit for 24 people option Option $69.00 Other Items 36 2 front dash-mounted fans to defrost front door Standard IncludedOther Items 37 driver’s LED reading light Standard IncludedOther Items 38 driver’s sun visors Standard IncludedOther Items 39 driver’s foot controls- adjustable Kongsberg system Option $1,130.00 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Items 40 Stainless Steel molding to cover edges on entrance and rear rise on passenger assist Option $387.00 Other Items 41 Separate control for non-synchronized wipers Not Applicable NA DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Category Item # Description Diesel CNG Hybrid Electric Fuel Cell Price Body BRT STYLING
Body – BRT STYLING 1 Standard Styling Package 44 passenger seats N/A N/A N/A N/A N/A N/ABody – BRT STYLING 2 BRT Exterior Styling Package (Front & Rear) with One Piece Windshield N/A N/A N/A N/A N/A N/A Body – BRT STYLING 3 BRT Roof Fairings Front and Rear N/A N/A N/A N/A N/A N/ABody – BRT STYLING 4 Curbside A Post Skid Plate N/A N/A N/A N/A N/A N/A Body – BRT STYLING 5 BODY - PASSENGER SEATS N/A N/A N/A N/A N/A N/A

BODY - PASSENGER SEATS
BODY - PASSENGER SEATS 1 44 Passenger Seating Configuration N/A N/A N/A N/A N/A N/A BODY - PASSENGER SEATS 2 51 Passenger Seat Configuration N/A N/A N/A N/A N/A N/A BODY - PASSENGER SEATS 3 ADD additional double flip seat in lieu of fixed seat N/A N/A N/A N/A N/A N/A BODY - PASSENGER SEATS 4 Remove one set of fixed seats N/A N/A N/A N/A N/A N/A BODY - PASSENGER SEATS 5 remove individual seat N/A N/A N/A N/A N/A N/A Engine 1
Engine 2 Cummins ISL-G 320 HP N/A N/A N/A N/A N/A N/AEngine 3 Cummins ISX-G 12 400 HP N/A N/A N/A N/A N/A N/A Engine 4 Cummins ISL 9 330 HP N/A N/A N/A N/A N/A N/AEngine 5 Cummins ISX 12 425 HP N/A N/A N/A N/A N/A N/A Engine 6 Cummins ISL 9 330 HP N/A N/A N/A N/A N/A N/A
Exhaust 1
Exhaust 2 none N/A N/A N/A N/A N/A N/AExhaust 3 Diesel Particulate Filter (Active) N/A N/A N/A N/A N/A N/AExhaust 4 none N/A N/A N/A N/A N/A N/AExhaust 5 Diesel Particulate Filter (Active) N/A N/A N/A N/A N/A N/AExhaust 6 none N/A N/A N/A N/A N/A N/AExhaust 7 Electric N/A N/A N/A N/A N/A N/A Exhaust 8 Not Applicable N/A N/A N/A N/A N/A N/A
Fuel 1
Fuel 2 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/AFuel 3 NGV2-3 Type 3 Complete CNG Cylinder (Vendor will list GGE) N/A N/A N/A N/A N/A N/A Fuel 4 NGV 2-4 Type 4 Complete CNG Cylinder (Vendor will list GGE) N/A N/A N/A N/A N/A N/AFuel 5 Hexagon Lincoln's TUFFSHELL Roof Mount Package N/A N/A N/A N/A N/A N/AFuel 6 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) N/A N/A N/A N/A N/A N/AFuel 7 EMCO - Posi/Lock Blue Urea Dispensing System N/A N/A N/A N/A N/A N/A Fuel 8 Standard Gravity Fill N/A N/A N/A N/A N/A N/A
Fuel 9 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/AFuel 10 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill N/A N/A N/A N/A N/A N/A Fuel 11 80 Gallon Net Useable Split Fuel Tanks N/A N/A N/A N/A N/A N/A Fuel 12 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) N/A N/A N/A N/A N/A N/AFuel 13 EMCO - Posi/Lock Blue Urea Dispensing System N/A N/A N/A N/A N/A N/AFuel 14 Standard Gravity Fill N/A N/A N/A N/A N/A N/A Fuel 15 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/AFuel 16 Dual Fill (Curbside and Streetside) w/Standard Gravity Fill N/A N/A N/A N/A N/A N/A Fuel 17 80 Gallon Net Useable Split Fuel Tanks for ADA Each Side N/A N/A N/A N/A N/A N/A Fuel Filter
Fuel Filter 1 Low Fuel Alarm N/A N/A N/A N/A N/A N/AFuel Filter 2 Low Fuel Alarm N/A N/A N/A N/A N/A N/AFuel Filter 3 Spin on Primary and Secondary Fuel Filters N/A N/A N/A N/A N/A N/AFuel Filter 4 Davco Fuel Pro 384, Heated N/A N/A N/A N/A N/A N/A Heavy Duty - 45 Foot
Options Price Sheet
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Fuel Filter 5 Racor 490R30 Filter W/Thumbpump N/A N/A N/A N/A N/A N/A Fuel Filter 6 Low Fuel Alarm N/A N/A N/A N/A N/A N/AFuel Filter 7 Spin on Primary and Secondary Fuel Filters N/A N/A N/A N/A N/A N/AFuel Filter 8 Davco Fuel Pro 384, Heated N/A N/A N/A N/A N/A N/A Fuel Filter 9 Racor 490R30 Filter W/Thumbpump N/A N/A N/A N/A N/A N/A Hybrid
Hybrid 1 none N/A N/A N/A N/A N/A N/AHybrid 2 none N/A N/A N/A N/A N/A N/AHybrid 3 Auxiliary Coolant Heater N/A N/A N/A N/A N/A N/A Hybrid 4 Allison EP40 Electric Drive System N/A N/A N/A N/A N/A N/AHybrid 5 Allison EP50 Electric Drive System N/A N/A N/A N/A N/A N/AHybrid 6 BAE Hybrid System HDS 200 - APS1-01K (1Kwh Battery w/Ultracaps) N/A N/A N/A N/A N/A N/A Hybrid 7 BAE Hybrid System HDS200 - APS3-32K (32KwH Battery) N/A N/A N/A N/A N/A N/AHybrid 8 BAE Hybrid System HDS300 - APS1-01K (1Kwh Battery w/Ultracaps) N/A N/A N/A N/A N/A N/AHybrid 9 BAE Hybrid System HDS300 - APS3-32K (32KwH Battery) N/A N/A N/A N/A N/A N/A Passenger Seat Options
Passenger Seat Options 1 44 Passenger Seating - Citiseat N/A N/A N/A N/A N/A N/APassenger Seat Options 2 AMSECO - 6468 N/A N/A N/A N/A N/A N/A Passenger Seat Options 3 AMSECO - Insight N/A N/A N/A N/A N/A N/A Passenger Seat Options 4 AMSECO - Metropolitan N/A N/A N/A N/A N/A N/APassenger Seat Options 5 AMSECO - 6466 N/A N/A N/A N/A N/A N/APassenger Seat Options 6 AMSECO - 6566 N/A N/A N/A N/A N/A N/APassenger Seat Options 7 AMSECO - 2005/6466 Suburbans N/A N/A N/A N/A N/A N/APassenger Seat Options 8 AMSECO Vision N/A N/A N/A N/A N/A N/APassenger Seat Options 9 AMSECO - Innovator 850 N/A N/A N/A N/A N/A N/A Passenger Seat Options 10 AMSECO - Premier N/A N/A N/A N/A N/A N/APassenger Seat Options 11 AMSECO - 2000 Series Recliners N/A N/A N/A N/A N/A N/APassenger Seat Options 12 AMSECO - VR50 Seat Inserts N/A N/A N/A N/A N/A N/APassenger Seat Options 13 AMSECO - CR50 Seat Inserts N/A N/A N/A N/A N/A N/APassenger Seat Options 14 4 One - Angel N/A N/A N/A N/A N/A N/APassenger Seat Options 15 4 One Aries N/A N/A N/A N/A N/A N/APassenger Seat Options 16 4 One Brasil N/A N/A N/A N/A N/A N/APassenger Seat Options 17 4 One - Citiseat N/A N/A N/A N/A N/A N/A Passenger Seat Options 18 4 One - Citipro N/A N/A N/A N/A N/A N/APassenger Seat Options 19 4 One - Diablo N/A N/A N/A N/A N/A N/APassenger Seat Options 20 4 One - Patriot N/A N/A N/A N/A N/A N/A Passenger Seat Options 21 4 One Gemini Seating N/A N/A N/A N/A N/A N/A Passenger Seat Options 22 4 One Torino G N/A N/A N/A N/A N/A N/APassenger Seat Options 23 Kiel Ideo N/A N/A N/A N/A N/A N/APassenger Seat Options 24 Kiel Esos N/A N/A N/A N/A N/A N/APassenger Seat Options 25 Add (3) Passenger Seats to Curbside Wheelwell N/A N/A N/A N/A N/A N/APassenger Seat Options 26 Add (2) Passenger Seats to Curbside Wheelwell N/A N/A N/A N/A N/A N/APassenger Seat Options 27 Hinged Rear Settee N/A N/A N/A N/A N/A N/A Passenger Seat Options 28 110 v outlets with USB charging throughout seating layout N/A N/A N/A N/A N/A N/APassenger Seat Options 29 Dual USB charging station throughout seating layout N/A N/A N/A N/A N/A N/APassenger Seat Options 30 Cup holders for each seat N/A N/A N/A N/A N/A N/APassenger Seat Options 31 Self-storing footrests for each seat N/A N/A N/A N/A N/A N/APassenger Seat Options 32 Expanding mesh magazine holder on seat back N/A N/A N/A N/A N/A N/A Passenger Seat Options 33 Three (3) point passenger restraint belts for each seat N/A N/A N/A N/A N/A N/A All options listed below are the same for each bus length worksheet.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Category Item # Description Designation Propulsion (if applicable) Price Air
Air 1 Shop Air Connection (Milton S790) N/A N/A N/A Air 2 Bendix AD9, (300 ci Purge) N/A N/A N/A Air 3 Bendix Adip, Heated N/A N/A N/A Air 4 Bendix Puraguard Air/Oil Separator N/A N/A N/A Air 5 Wabco SS 1800 Air Dryer, Heated N/A N/A N/A Air 6 Chicago Rawhide T2000 N/A N/A N/A Air 7 Chicago Rawhide Dual Turbo 2000 N/A N/A N/A Air 8 Graham White QBA 15 "Sludge Buster", Heated N/A N/A N/A Air 9 Kingston Auto Drain Valve At Ping Tank N/A N/A N/A Air 10 Terminate Kneeling Operation Sensor N/A N/A N/A Air 11 Wabco 37.4 cfm twin cylinder air compressor (ISB 6.7 engine only) N/A N/A N/A Other Option - Specify N/A N/A N/A
Body- Bike Rack
Body – Bike Rack 1 Sportworks Apex 3 - 3 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 2 Sportworks - 2 Position Bike, Black Powder Coated N/A N/A N/A Body – Bike Rack 3 Sportworks - 2 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 4 Sportworks - 3 Position Bike, Black Powder Coated N/A N/A N/A Body – Bike Rack 5 Sportworks - Trilogy 3 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 6 Midwest Bus - BYK RYK (Stainless Steel) N/A N/A N/A Body – Bike Rack 7 Bike Rack Deployed Lamp on Dash N/A N/A N/A Body – Bike Rack 8 Bike Rack 5" Spot Mirror N/A N/A N/A Body – Bike Rack 9 Bike Rack Mounted Advertising Frame, 14"X 44" N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Driver's Barrier
Body – Driver's Barrier 1 Wrap Around Fiberglass with Schedule Rack Cutouts N/A N/A N/A Body – Driver's Barrier 2 Wrap Around Fiberglass W/O Schedule Rack Cutouts N/A N/A N/A Body – Driver's Barrier 3 Plexiglass Drivers Security Enclosure N/A N/A N/A Body – Driver's Barrier 4 Flat Melamine, Two Piece N/A N/A N/A Body – Driver's Barrier 5 Flat Melamine, Two Piece, w/(4) Schedule Holders N/A N/A N/A Body – Driver's Barrier 6 Plexiglass Drivers Security Enclosure, two pieces N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Driver'Seat
Body – Driver Seat 1 Recaro Ergo Metro w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 2 Recaro MCII N/A N/A N/A Body – Driver Seat 3 USSC 9100 ALX w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 4 USSC 9100 ALX - 3 w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 5 Add Headrest N/A N/A N/A Body – Driver Seat 6 Add Armrest (Right Side only) N/A N/A N/A Body – Driver Seat 7 Add Shoulder Belt N/A N/A N/A Body – Driver Seat 8 Add 3 -Point, Horizontally Adjustable D - Loop N/A N/A N/A Body – Driver Seat 9 Driver’s Seat Vacancy Alarm N/A N/A N/A Body – Driver Seat 10 Safety Orange Shoulder Belt (US SC ALX) N/A N/A N/A Body – Driver Seat 11 Silicon Foam At Lower Seat Cushion (USSC) N/A N/A N/A Body – Driver Seat 12 Holdsworth Fabric N/A N/A N/A Body – Driver Seat 13 FR Treated Foam (Recaro) N/A N/A N/A Body – Driver Seat 14 USSC Q90 ALX N/A N/A N/A Body – Driver Seat 15 USSC G2A -2pt Drivers Seat N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify N/A N/A N/A
Body - Exit Door
Body – Exit Door 1 Standard Melamine Panels on Lower Section Both Sides of Rear Exit Door N/A N/A N/A Body – Exit Door 2 Upper Clear Plexiglas Modesty Panels Both Sides of Rear Exit Door N/A N/A N/A Body - Exit Door 3 Accelerator Interlock when doors are open N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Floor Covering N/A N/A N/A
Body – Floor Covering 1 Greenwood ACQ Plywood W/RCA Rubber N/A N/A N/A Body – Floor Covering 2 Altro Meta/Chroma Transfloor OR Gerflor Terabus Sirius/Helios N/A N/A N/A Body – Floor Covering 3 Altro wood safety (vinyl simulated woodgrain) N/A N/A N/A Body – Floor Covering 4 Gerflor Tarabus Gaya Wood (vinyl simulated woodgrain) N/A N/A N/A Body – Floor Covering 5 Composite Sub Floor N/A N/A N/A Body – Floor Covering 6 Rear Seat Riser for Forward Facing Seats N/A N/A N/A Body – Floor Covering 7 Front Seat Risersor for Forward Facing Seats (Each Side) N/A N/A N/A Body – Floor Covering 8 Pressure-preservative treated plywood N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Mirror,
Exterior
Body – Mirror, Exterior 1 Safe Fleet One Piece 8" x 8" Flat Glazing W/Stainless Steel Arms, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 2 Safe Fleet One Piece 8" x 8" Flat Glazing W/S.S. Arms, Manual W/6" Spot Mirror N/A N/A N/A Body – Mirror, Exterior 3 Safe Fleet 8" x 15" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 4 Safe Fleet 9" x 11" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 5 Safe Fleet 9" x 13" Class "A" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 6 Safe Fleet 10" x 13:", 2 Piece (Flat & Convex), Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 7 Safe Fleet 10" x 11 " 1 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 8 Rosco 8" x 15" 1 Piece, Heated Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 9 Lucerix Metagal 7" x 15" 2 Piece, Heated Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 10 Velvac View-All System (Camera Mounted in Exterior Mirror W/LCD Screen in Driver Area) N/A N/A N/A Body – Mirror, Exterior 11 Velvac Hyperion Lane Change Guardian N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Mirror, Interior
Body – Mirror, Interior 1 Mirror - 8 1/2 " X 16" N/A N/A N/A Body – Mirror, Interior 2 Mirror - 4.75" X 15" N/A N/A N/A Body – Mirror, Interior 3 Mirror - Front Door 6" Round on Header Door N/A N/A N/A Body – Mirror, Interior 4 Mirror - Rear Exit Door/Step Well 12" Convex N/A N/A N/A Body – Mirror, Interior 5 Mirror - 8 1/2 " X 1" center N/A N/A N/A Body – Mirror, Interior 6 Mirror - 5" flat N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Paint & Decal
Body – Paint & Decal 1 One Color w/Roof Numbers N/A N/A N/A Body – Paint & Decal 2 (2) Colors, with and without Black Mask At Windows N/A N/A N/A Body – Paint & Decal 3 (3) Colors, with and without Black Mask At Windows N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Paint & Decal 4 Basic Decal Package (Up to Three Strips and Equivalent Design) N/A N/A N/A Body – Paint & Decal 5 Custom Paint/Decal Design (Per Purchasers' Spec) N/A N/A N/A Body – Paint & Decal 6 Clear Coat Complete Bus N/A N/A N/A Body – Paint & Decal 7 Remove Roof Numbers N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Passenger
Signal
Body – Passenger Signal 1 Pullcords - Above Windows (Neutral Or Yellow) w/Touch Pad At W/C Positions N/A N/A N/A Body – Passenger Signal 2 Touch Tape (At Window Mullions) N/A N/A N/A Body – Passenger Signal 3 Button at Exit Door Vertical Stanchion N/A N/A N/A Body – Passenger Signal 4 Additional Amber Stop Request Lamp Mounted on Driver's Dash N/A N/A N/A Body – Passenger Signal 5 Button in the Parcel Rack N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Rear Door N/A N/A N/A
Body – Rear Door 1 34" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 2 48" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 3 56" Wide Rear Door w/Full Driver Control (Air Open/Air Close) N/A N/A N/A Body – Rear Door 4 Electric Operated Front/Rear Door Motor and Control N/A N/A N/A Body – Rear Door 5 Passenger Open (Push Open/Spring Close) N/A N/A N/A Body – Rear Door 6 Touch Bars (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 7 Touch Bars w/Driver Override N/A N/A N/A Body – Rear Door 8 Touch Tape in Place of Touch Bars N/A N/A N/A Body – Rear Door 9 Vapor Class Acoustic (Photo Sensor) N/A N/A N/A Body – Rear Door 10 Vapor V Touch (Electronic Touch Bar) N/A N/A N/A Body – Rear Door 11 Vapor Electric Transit Operator N/A N/A N/A Body – Rear Door 12 Vapor Electric Door Control / 1939 Interface N/A N/A N/A Body – Rear Door 13 Vapor Optical Pressure Wave Switch N/A N/A N/A Body – Rear Door 14 Exterior Air Release (Front Door Control Valve) N/A N/A N/A Body – Rear Door 15 Driver Push Button Door Controls N/A N/A N/A Body – Rear Door 16 Bode CADS All electric doors N/A N/A N/A Body – Rear Door 17 Remove Rear Door, Add Two Seats N/A N/A N/A Body – Rear Door 18 Ventura electric rear door N/A N/A N/A Body – Rear Door 19 Add Center Door (Articulated bus only) N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Roof Hatch
Body – Roof Hatch 1 Manual Hatch At Front and Rear Positions N/A N/A N/A Body – Roof Hatch 2 One (1) Roof Hatch Position - Rear N/A N/A N/A Body – Roof Hatch 3 Electric Hatch with Driver Control (per Position) N/A N/A N/A Body – Roof Hatch 4 Glass Hatch in Lieu of Standard N/A N/A N/A Body – Roof Hatch 5 Additional Roof Hatch Position N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Schedule Rack N/A N/A N/A
Body – Schedule Rack 1 none N/A N/A N/A Body – Schedule Rack 2 Innocom Schedule Racks 3.75" x 7" x 1.5" N/A N/A N/A Body – Schedule Rack 3 Innocom Schedule Racks 8.62" x 1 1" x 1" N/A N/A N/A Body – Schedule Rack 4 22" x 21" Black, RH Load Open Back N/A N/A N/A Body – Schedule Rack 5 Transit Information Products - 19" x 21" OBIC 19/214P1LTRMC N/A N/A N/A Body – Schedule Rack 6 Transit Information Products - 19" x 21" OBICT10P2LTRMC N/A N/A N/A Other Option - Specify N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body -
Stanchions/Grab Rails
Body – Stanchions/Grab
Rails 1 Stainless Steel Stanchions and Grab Rails and Modesty Panel Tubes N/A N/A N/A Body – Stanchions/Grab
Rails 2 Powder Coated Vertical Stanchions, Grab Rails and Modesty Panel Tubes N/A N/A N/A Body – Stanchions/Grab
Rails 3 Powder Coated Vertical Stanchions only N/A N/A N/A Body – Stanchions/Grab
Rails 4 Farebox Guard Rail N/A N/A N/A
Body – Stanchions/Grab
Rails 5 Grab Rail Forward Wheel Housing N/A N/A N/A
Body – Stanchions/Grab
Rails 6 Luggage Rack 68", Two -Tier with Fixed Shelf's N/A N/A N/A Body – Stanchions/Grab
Rails 7 Vinyl Coated Nylon Grab Straps (Cost per Handle) N/A N/A N/A Body – Stanchions/Grab
Rails 8 SSTL Spring Loaded Grab Handle (Cost per Handle) N/A N/A N/A Body – Stanchions/Grab
Rails 9 non-vinyl-coated nylon grab straps (per handle, color to be chosen by agency) N/A N/A N/A Other Option - Specify N/A N/A N/A
Cooling System
Cooling System 1 Modine Side By Side By Side Plate Fin Radiator N/A N/A N/A Cooling System 2 Modine Electric Cooling Fan System N/A N/A N/A Cooling System 3 EMP Electric Cooling Fan System N/A N/A N/A Cooling System 4 Electric Fan Cooling System (Non EMP - Specify OEM) N/A N/A N/A Cooling System 5 Grayson Electric Cooling Fan System N/A N/A N/A Cooling System 6 Hydraulic Cooling Fan N/A N/A N/A Cooling System 7 L&M Radiator N/A N/A N/A Cooling System 8 Masabi Radiator N/A N/A N/A Cooling System 9 E - Coat Radiator, CAC & Hydraulic Cooler N/A N/A N/A Cooling System 10 Radiator Tank Guard N/A N/A N/A Cooling System 11 Double Breeze Constant Tension Clamps N/A N/A N/A Cooling System 12 Oetiker Constant Torque Clamps N/A N/A N/A Cooling System 13 Gates - Greenstripe Hose N/A N/A N/A Cooling System 14 Webasto Model Thermo 300 ( 104,000 btu ) Coolant Heater N/A N/A N/A Cooling System 15 Webasto Model Thermo 230 ( 80,000 btu ) Coolant Heater N/A N/A N/A Cooling System 16 Proheat Model X120 (120,000 btu) Coolant Heater N/A N/A N/A Cooling System 17 Proheat Model X80 ( 80,000 btu ) Coolant Heater N/A N/A N/A Cooling System 18 Proheat Model X50 ( 50,000 btu ) Coolant Heater N/A N/A N/A Cooling System 19 Proheat Model X45 ( 45,000 btu ) Coolant Heater N/A N/A N/A Cooling System 20 Electric Coolant Auxiliary Heater N/A N/A N/A Cooling System 21 Espar Model Hydronic #4 N/A N/A N/A Cooling System 22 Espar Model Hydronic #5 N/A N/A N/A Cooling System 23 Articulated Only? N/A N/A N/A Cooling System 24 EMP Electric Cooling Fan System N/A N/A N/A Cooling System 25 Electric Fan Cooling System (Non EMP - Specify OEM) N/A N/A N/A Cooling System 26 Double Breeze Constant Tension Clamps N/A N/A N/A Cooling System 27 Oetiker Constant Torque Clamps N/A N/A N/A Cooling System 28 Grayson Electric Cooling Fan System N/A N/A N/A Other Option - Specify N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical
Electrical 1 Voltage Spike Arrestor, S.K.I. Products SKI241 -101445, or Approved Equal N/A N/A N/A Electrical 2 24 Volt to 13.6 Volt DC - DC Converter, 30 Ampere Output, Model 1645 - 24 - 12 - 30, Manufactured By Wilmore Electronics Co., Inc. or Equivalent N/A N/A N/A Electrical 3 Battery Voltage Equalizer N/A N/A N/A Electrical 4 24V battery isolation system (keeps house batteries from being drained by cameras, recorders, etc.) N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Accessories
Electrical – Accessories 1 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Drivers Area N/A N/A N/A Electrical – Accessories 2 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Rear Air Return Grille Area N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Alternator
Not for Electric N/A N/A N/A
Electrical – Alternator 1 Delco 50 DN (270 AMP) N/A N/A N/A Electrical – Alternator 3 Penntex Px833 Alternator N/A N/A N/A Electrical – Alternator 4 Neihoff C - 701 (300 AMP) N/A N/A N/A Electrical – Alternator 5 Neihoff C - 703 (330 AMP) N/A N/A N/A Electrical – Alternator 6 Neihoff C - 803 (500 AMP) Air Cooled N/A N/A N/A Electrical – Alternator 7 EMP POWER 450 AMP Brushless Alternator N/A N/A N/A Electrical – Alternator 8 KA500 HIPRO (KHP 500-000) (475 AMP) N/A N/A N/A Electrical – Alternator 9 Marine Cabling for Charging System N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Automatic
Passenger Counter
Electrical – Automatic
Passenger Counter 1 none N/A N/A N/A
Electrical – Automatic
Passenger Counter 2 UTA Automatic Passenger Counter System with GPS, WLAN Capabilities N/A N/A N/A Electrical – Automatic
Passenger Counter 3 UTA APC Sensors, Cabling, CPU only N/A N/A N/A Electrical – Automatic
Passenger Counter 4 Wiring provisions IAW APC manufacture N/A N/A N/A Electrical – Automatic
Passenger Counter 5 Strategic Mapping APC system N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Auxiliary
Lights
Electrical – Auxiliary Lights 1 Four (4) 4" Diameter LED Auxiliary Brake Lights N/A N/A N/A Electrical – Auxiliary Lights 2 Two (2) 4" Diameter LED Auxiliary Brake Lights N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Auxiliary Lights 3 Two (2) Dialight 7" Diameter LED Auxiliary Brake Lights N/A N/A N/A Electrical – Auxiliary Lights 4 4 LED Brake Strip Lamps N/A N/A N/A Electrical – Auxiliary Lights 5 JKA Enterprises LED "Stop" Light N/A N/A N/A Electrical – Auxiliary Lights 6 Exterior Curb Lamps, Front & Rear - Dialight N/A N/A N/A Electrical – Auxiliary Lights 7 Triangle Amber LED Yield Sign - Dialight N/A N/A N/A Electrical – Auxiliary Lights 8 Two (2) Red LED Brake Strip Lamps N/A N/A N/A Electrical – Auxiliary Lights 9 Remove LED Auxiliary Brake Lights (DEDUCT) N/A N/A N/A Electrical – Auxiliary Lights 10 Overhead Farebox LED - Light W/Night - Day Switch (on Drivers Side Panel) - Light Illuminates W/Frt. Door Open and Switch in the Night Position N/A N/A N/A Electrical – Auxiliary Lights 11 Service Compartment Lights - LED N/A N/A N/A Electrical – Auxiliary Lights 12 LED Beacon Light N/A N/A N/A Electrical – Auxiliary Lights 13 LED Decal Lights (2) - Non - Flashing only (Per NHTSA) N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Battery &
Battery Chargers
Electrical - Battery & Battery
Chargers 1 Polyethylene battery tray and enclosure N/A N/A N/A Electrical – Battery &
Battery Chargers 2 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) N/A N/A N/A Electrical – Battery &
Battery Chargers 3 (4) DEKA Group 32 Top Post N/A N/A N/A Electrical – Battery &
Battery Chargers 4 DEKA AGM Type 8D/Group 32 N/A N/A N/A Electrical – Battery &
Battery Chargers 5 (4) Odyssey Group 32 N/A N/A N/A
Electrical – Battery &
Battery Chargers 6 (4) Trojan Group 32 N/A N/A N/A
Electrical – Battery &
Battery Chargers 7 Ultra Capacitors - KBI KAPower N/A N/A N/A Electrical – Battery &
Battery Chargers 8 Anderson 350 Jump Start Connector (Each) N/A N/A N/A Electrical – Battery &
Battery Chargers 9 Remove Anderson 350 Jump Start N/A N/A N/A Electrical – Battery &
Battery Chargers 10 En-route Battery Charging system (please specify) N/A (electric only) N/A Electrical – Battery &
Battery Chargers 11 Inductive charging system for depot charging N/A (electric only) N/A Electrical – Battery &
Battery Chargers 12 Cable "Pigtail" Chargers N/A (electric only) N/A Electrical – Battery &
Battery Chargers 13 Battery Chargers N/A (electric only) N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Battery &
Battery Chargers 14 60 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 15 80 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 16 100 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 17 125 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 18 250 kW Inductive Charging In Route Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 19 250 kW Inductive Charging On-Board Receiver N/A (electric only) N/A Electrical – Battery &
Battery Chargers 20 350 kW on-route Charger N/A (electric only) N/A Electrical - Battery & Battery
Chargers 21 Wave Wireless Inductive chargin Equipment In Route Pad N/A (electric only) N/A Electrical - Battery & Battery
Chargers 22 Wave Wireless Inductive Charging Equipment Depot Level Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 23 Momentum Dynamics Wireless Inductive Charging Equipment In Route Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 24 Momentum Dynamics Wireless Inductive Charging Equipment Depot Level Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 25 Momentum Dynamics Wireless Inductive Charging Equipment On Bus Receiver N/A (electric only) N/A Electrical – Battery &
Battery Chargers 26 Momentum Dynamics/Princeton power Wayside Battery storage-one megawatt with optional 500 kW N/A (electric only) N/A Electrical – Battery &
Battery Chargers 27 Electrical Management Software from Viriciti N/A (electric only) N/A 28 Energy Storage System = Battery Packs N/A N/A
Electrical – Battery &
Battery Chargers 29 260 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 30 320 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 31 440 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 32 500 KWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 33 660 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 34 800 kWh N/A (electric only) N/A
Electrical - Battery & Battery
Chargers 35 Electric Trolley Bus Package N/A (electric only) N/A Electrical - Battery & Battery
Chargers 36 Other Option - Specify N/A N/A
Electrical -
Communication/Radi
o
Electrical –
Communication/Radio 1 Pre - Wire:12V/40A Direct Battery & 12V/10A Ignition (Route to RH Dash & Ele. Equip. Box) and Install Roof Mount RF/GPS/Cellular Antenna N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical –
Communication/Radio 2 Motorola XLT 2500, 10- 35 W, 800MHZ W/DEC Box and Silent Alarm Switch N/A N/A N/A Electrical –
Communication/Radio 3 Motorola XLT 5000 N/A N/A N/A
Electrical –
Communication/Radio 4 Motorola APX4500 N/A N/A N/A
Electrical –
Communication/Radio 5 Motorola CM200 and CM300, 45W, 439 - 470- MHZ N/A N/A N/A Electrical –
Communication/Radio 6 Motorola CDM 1250 N/A N/A N/A
Electrical –
Communication/Radio 7 Harris Radio N/A N/A N/A
Electrical –
Communication/Radio 8 DC Power Filter for Radio Wiring N/A N/A N/A Electrical –
Communication/Radio 9 Hand - Held Microphone N/A N/A N/A Electrical –
Communication/Radio 10 Public Address System with Boom Mic N/A N/A N/A Electrical –
Communication/Radio 11 Additional Flush Mounted Speakers (per Pair) N/A N/A N/A Electrical –
Communication/Radio 12 ASP930T Radio Antenna with RG58 Coax Cable and TNC Connector N/A N/A N/A Electrical –
Communication/Radio 13 Antenna Specialist ASP- 572 N/A N/A N/A Electrical –
Communication/Radio 14 Customer Specified Two Way Radio and Installation N/A N/A N/A Electrical –
Communication/Radio 15 GPS Antenna W/Gasket (Trimble 502 Model 18334 and Approved Equal) with RG58 Coax Cable and F Type Male Connector to the VLU N/A N/A N/A Electrical –
Communication/Radio 16 customer specific antenna, ground plane, and cable runs installation N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Destination Sign
Electrical – Destination Sign 1 Twin Vision Silver Series Sign (16 X160) Front & Side N/A N/A N/A Electrical – Destination Sign 2 Twin Vision Silver Series Sign (24 X 200) Front & Side N/A N/A N/A Electrical – Destination Sign 3 Twin Vision Smart Series II (16 X160) Front & Side N/A N/A N/A Electrical – Destination Sign 4 Twin Vision Smart Series II (24 X 200) Front & Side N/A N/A N/A Electrical – Destination Sign 5 Twin Vision 100% Amber LED, Front, Curb Side, Rear N/A N/A N/A Electrical – Destination Sign 6 Twin Vision 100% Amber LED, Rear N/A N/A N/A Electrical – Destination Sign 7 Twin Vision Chroma I Color LED Front N/A N/A N/A Electrical – Destination Sign 8 Twin Vision Chroma IV 100% Color LED N/A N/A N/A Electrical – Destination Sign 9 Twin Vision 24 X 200 Front Amber LED Sign N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Destination Sign 10 Luminator SMT Horizon 100% Amber LED Front, Curbside, Rear N/A N/A N/A Electrical – Destination Sign 11 AXION with WI FI and Time and Date Time Stamp N/A N/A N/A Electrical – Destination Sign 12 Luminator Spectrum 100% Amber LED Front ,Curbside, Rear N/A N/A N/A Electrical – Destination Sign 13 Luminator White LED Front, Curb-side and Rear N/A N/A N/A Electrical – Destination Sign 14 Add Twin Vision Smart Series II w/ rear camera, Rear Sign N/A N/A N/A Electrical – Destination Sign 15 Add Street Side Sign (Twin Vision Amber LED) N/A N/A N/A Electrical – Destination Sign 16 Add Street Side Sign (Twin Silver Series LED) N/A N/A N/A Electrical – Destination Sign 17 Remove Rear Sign (DEDUCT) N/A N/A N/A Electrical – Destination Sign 18 Program Software (Twin Vision) N/A N/A N/A Electrical – Destination Sign 19 Luminator Programming Software USB Wireless N/A N/A N/A Electrical – Destination Sign 20 Transign Curtain Front and Side Sign N/A N/A N/A Electrical – Destination Sign 21 Heated Front Sign Glazing N/A N/A N/A Electrical – Destination Sign 22 Transign, (4) Character, Metal Housing N/A N/A N/A Electrical – Destination Sign 23 Transign, (3) Character, Metal Housing N/A N/A N/A Electrical – Destination Sign 24 Transign, (2) Character, D - 1 853, Metal Housing N/A N/A N/A Electrical – Destination Sign 25 Twin Vision Electronic Front Dash Sign N/A N/A N/A Electrical – Destination Sign 26 Hanover Display LED Amber Destination Signs (model# OL028, OL054 & OL64J) N/A N/A N/A Electrical – Destination Sign 27 Luminator Electronic Front Dash Sign N/A N/A N/A Electrical – Destination Sign 28 I/O controls Destination sign all Models N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Destination Sign
Programming
Electrical – Destination Sign
Programming 1 Luminator USB & Integrated Programing Software N/A N/A N/A Electrical – Destination Sign
Programming 2 Twin Vision Elyse 2 USB N/A N/A N/A
Electrical – Destination Sign
Programming 3 Twin Vision Software Package N/A N/A N/A
Other Option - Specify N/A N/A N/A
Electrical -
Diagnostics
Electrical – Diagnostics 1 Set of Multiplexing Diagnostics (Includes the 7 Following Items) N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Diagnostics 2 Incl w/set - Circuit Tester N/A N/A N/A Electrical – Diagnostics 3 Incl w/set - Program Loader N/A N/A N/A Electrical – Diagnostics 4 Incl w/set - Program N/A N/A N/A Electrical – Diagnostics 5 Incl w/set - ID Writer/Verification N/A N/A N/A Electrical – Diagnostics 6 Incl w/set - RS232/RS485 Converter N/A N/A N/A Electrical – Diagnostics 7 Incl w/set - Software, Real Time Ladder Logic N/A N/A N/A Electrical – Diagnostics 8 Incl w/set - Hand - Held Computer N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Equipment
Storage Box
Electrical – Equipment
Storage Box 1 none N/A N/A N/A
Electrical – Equipment
Storage Box 2 UTA APC Sensors, Cabling, CPU only N/A N/A N/A Electrical – Equipment
Storage Box 3 33"H X 20"D X 22.5"W, 13 - 42920F006 N/A N/A N/A Electrical – Equipment
Storage Box 4 33"H X 20"D X 22.5"W, 13 - 42920F006, w/2 - Doors N/A N/A N/A Electrical – Equipment
Storage Box 5 33"H X 20"D X 22.5"W, 13 - 42920F014, w/Louvered Back Panel N/A N/A N/A Electrical – Equipment
Storage Box 6 Strategic Mapping sensors, cabling, CPU only N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Lights,
Exterior
Electrical – Lights, Exterior 1 All Exterior Lights LED - Type Lamps N/A N/A N/A Electrical – Lights, Exterior 2 Headlight LED Dialight - Low Beam N/A N/A N/A Electrical – Lights, Exterior 3 Headlight LED Dialight - High Beam N/A N/A N/A Electrical – Lights, Exterior 4 Halogen Sealed Beam Headlights N/A N/A N/A Electrical – Lights, Exterior 5 Tail Lights - Manufacturer Dialite LED, Fixture Size - 7" Diameter N/A N/A N/A Electrical – Lights, Exterior 6 Tail Lights - Manufacturer Dialite LED, Fixture Size - 4" Diameter N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Intelligent
Vehicle Network
Electrical – Intelligent
Vehicle Network 1 none
Electrical – Intelligent
Vehicle Network 2 Clever Devices IVN III W/Voice Annunciation, APC, Wireless LAN N/A N/A N/A Electrical – Intelligent
Vehicle Network 3 AVAIL IVN W/MDC, GPS, APC, WLAN N/A N/A N/A Electrical – Intelligent
Vehicle Network 4 Init Voice Enunciator/AVL/GPS/APC/WLAN N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Intelligent
Vehicle Network 5 Siemens Transit Master N/A N/A N/A
Electrical – Intelligent
Vehicle Network 6 Transloc Transit Visualization System AVL N/A N/A N/A Electrical – Intelligent
Vehicle Network 7 Orbital TMS CAD/AVL System W/Voice Annunciation, APC N/A N/A N/A Electrical – Intelligent
Vehicle Network 8 Intelligent Vehicle System Prewire only N/A N/A N/A Electrical – Intelligent
Vehicle Network 9 Mapping and Database Setup for GPS per Customer Requirement N/A N/A N/A Electrical – Intelligent
Vehicle Network 10 Trimble "Button" Antenna N/A N/A N/A Electrical – Intelligent
Vehicle Network 11 Low Profile Blade Antenna N/A N/A N/A Electrical – Intelligent
Vehicle Network 12 Strategic Mapping IVN N/A N/A N/A
Electrical – Intelligent
Vehicle Network 13 Complete INIT on-board ITS system, CoPilot PC, APC, CAD/AVL, Visual/Voice Stop Enunciator, Emergency button N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Multiplexing
Electrical – Multiplexing 1 Dinex, I/O Controls G3 System N/A N/A N/A Electrical – Multiplexing 2 I/O Controls Wireless RF Module N/A N/A N/A Electrical – Multiplexing 3 I/O Controls, Gateway Module (Included in the ITS Prewire Option) N/A N/A N/A Electrical – Multiplexing 4 Vansco N/A N/A N/A Electrical – Multiplexing 5 VDO N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Pleasure
Electrical – Pleasure 1 none N/A N/A N/A Electrical – Pleasure 2 Radio Tacho Link Event Data Recorder N/A N/A N/A Electrical – Pleasure 3 Radio N/A N/A N/A Electrical – Pleasure 4 Radio Am/FM/CD N/A N/A N/A Electrical - Pleasure 5 On-Board entertainment system including 6 video screen DVD CD-ROM player N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Public
Announcement
Electrical – Public
Announcement 1 Drivers Speaker W/Separate Volume Control N/A N/A N/A Electrical – Public
Announcement 2 REI Model 750040 PA W/Handheld Mic W/(6) Flush Mounted Speakers N/A N/A N/A Electrical – Public
Announcement 3 Luminator IVS W/GPS Capability, w/LED Sign, W/O Mapping N/A N/A N/A Electrical – Public
Announcement 4 DR700 Vehicle Logic Unit W/GPS Capability, w/LED Sign, W/O Mapping N/A N/A N/A Electrical – Public
Announcement 5 Clever Devises - Speakeasy II N/A N/A N/A Electrical – Public
Announcement 6 Rei Echo PA System N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Public
Announcement 7 Shure Brothers Lapel Microphone w/REI PA System N/A N/A N/A Electrical – Public
Announcement 8 Midwest Lapel Microphone (Use w/Voice Annunciation System) N/A N/A N/A Electrical – Public
Announcement 9 Interior LED Sign N/A N/A N/A
Electrical – Public
Announcement 10 One Additional Pair of Interior Speakers N/A N/A N/A Electrical – Public
Announcement 11 One Additional exterior Speaker Each N/A N/A N/A Electrical – Public
Announcement 12 REI w/switch mounted in Driver’s Area N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Video
Surveillance
Electrical – Video
Surveillance 1 none N/A N/A N/A
Electrical – Video
Surveillance 2 Apollo RoadRunner DVR 2TB 4 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 3 Apollo RoadRunner DVR 2TB 8 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 4 Apollo RoadRunner DVR 2TB 12 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 5 Apollo RoadRunner DVR 2TB 16 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 6 Apollo RoadRunner HDR DVR 2TB 4 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 7 Apollo RoadRunner HDR DVR 2TB 8 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 8 Apollo RoadRunner HDR DVR 2TB 12 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 9 Apollo RoadRunner HDR DVR 2TB 16 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 10 Apollo Wireless Data Download capable N/A N/A N/A Electrical – Video
Surveillance 11 Apollo Cellular "Live Look Through" Capable N/A N/A N/A Electrical – Video
Surveillance 12 Apollo Vehicle Information Management System (ViM) N/A N/A N/A Electrical – Video
Surveillance 13 Apollo video 4K DVR w/9 camera system w/ Audio N/A N/A N/A Electrical – Video
Surveillance 14 Cole Hersee 12063 Electrical Tow Connector N/A N/A N/A Electrical – Video
Surveillance 15 (4) Camera Pre Wire Package N/A N/A N/A Electrical – Video
Surveillance 16 SEON TX8 8 channel w/1 TB hard drive N/A N/A N/A Electrical – Video
Surveillance 17 SEON DX-HD 13 channel w/1 TB hard drive N/A N/A N/A Electrical – Video
Surveillance 18 SEON 2 TB hard drive upgrade N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 19 SEON WP00AG4 Explorer DX12 and DX-HD Smart-Link 12 VDC module to DVR cable, diagnostic indicator/alarm button & harness, GPS4 receiver mount. N/A N/A N/A Electrical – Video
Surveillance 20 SEON CQ903A integrated IR Dome day/Night 600TVL interior camera, audio, 2.9 mm lens. N/A N/A N/A Electrical – Video
Surveillance 21 SEON CA904EI Day/Night 600TVL camera, exterior (w/infrared, no audio), 3.6 mm lens. N/A N/A N/A Electrical – Video
Surveillance 22 SEON CJ904A Dome Day/Night 600TVL camera, audio, 3.6mm lens w/mount N/A N/A N/A Electrical – Video
Surveillance 23 SEON CHW702EJ HD progressive scan camera, 16mm lens, exterior (no audio) and APPINJ POE injector w/mount. N/A N/A N/A Electrical – Video
Surveillance 24 SEON SRLGA07 Smart-Reach Lite, 2.4GHz Wireless bridge w/antenna N/A N/A N/A Electrical – Video
Surveillance 25 SEON HDD-STB Vmax View software, docking station & handheld mouse. N/A N/A N/A Electrical – Video
Surveillance 26 SEON LMK LCD monitor, 5.6 inch, AC charger, battery pack N/A N/A N/A Electrical – Video
Surveillance 27 Safety Vision RR6000 Pro w/(4) Digital Color Cameras, 120 GB DVR, w/Audio N/A N/A N/A Electrical – Video
Surveillance 28 Angel Trax - 6 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 29 Angel Trax - 8 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 30 Angel Trax - 12 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 31 Angel Trax -16 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-F- ready N/A N/A N/A Electrical – Video
Surveillance 32 Angel Trax Upgrade to 1 Tb - Double Stacked 500 G HD N/A N/A N/A Electrical – Video
Surveillance 33 Angel Trax Live View, Live GPS, and System Health Notification option N/A N/A N/A Electrical – Video
Surveillance 34 March Network (8) Camera System N/A N/A N/A Electrical – Video
Surveillance 35 REI Bus Watch Digital N/A N/A N/A
Electrical – Video
Surveillance 36 TVSS Claim Safe III w/4 Digital Cameras N/A N/A N/A Electrical – Video
Surveillance 37 Mobileview IV Digital, (5) Cameras, 250 GB DVR, w/Audio N/A N/A N/A Electrical – Video
Surveillance 38 Mobilview PENTA DVR N/A N/A N/A
Electrical – Video
Surveillance 39 Mobileview MV3000 DVR N/A N/A N/A
Electrical – Video
Surveillance 40 Rear View Camera System N/A N/A N/A
Electrical – Video
Surveillance 41 Add Additional Color Camera N/A N/A N/A Electrical – Video
Surveillance 42 Central Station Mobileview (Kalatel) N/A N/A N/A Electrical – Video
Surveillance 43 Verint 4 Camera System N/A N/A N/A
Electrical – Video
Surveillance 44 Verint 5 Camera System N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 45 Video Test Kit Mobileview IV - Kalatal N/A N/A N/A Electrical – Video
Surveillance 46 Desk Top Viewing Station (REI) N/A N/A N/A Electrical – Video
Surveillance 47 Velvac Hyperion Virtual DVR (up to 7 camera views through dash mounted tablet) N/A N/A N/A Other Option - Specify N/A N/A N/A
Engine - Accessories
Engine – Accessories 1 Cummins Compucheck Fittings for (Air, Oil, Fuel & Coolant Testing) N/A Diesel Only N/A Engine – Accessories 2 Williams Controls 41 Degree Throttle Pedal N/A Diesel Only N/A Engine – Accessories 3 Williams Controls 45 Degree Throttle Pedal N/A Diesel Only N/A Engine – Accessories 4 Teleflex Adjustable Throttle and Brake Pedal N/A Diesel Only N/A Engine – Accessories 5 STD Donaldson (RBX00- 2277) - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 6 Ashcraft (25-1490a02L) - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 7 Filterminder # SP - 3832 - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 8 Donaldson Informer - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 9 Spin on Filters Supplied By Engine Manufacturer N/A Diesel Only N/A Engine – Accessories 10 By Pass Filter - Spinner - Bypass Model 976 N/A Diesel Only N/A Engine – Accessories 11 Sample Test Port - Titan Probalizer OD-1014 N/A Diesel Only N/A Engine – Accessories 12 FEMCO Oil Drain Plug N/A Diesel Only N/A Engine – Accessories 13 Magnetic Drain Plug N/A Diesel Only N/A Engine – Accessories 14 Test Ports Shall Be Provided for Commonly Checked Functions on the Bus N/A Diesel Only N/A Engine – Accessories 16 Rear Run Box Starter - Delco MT 42 - 24v Electric N/A Diesel Only N/A Engine – Accessories 17 Rear Run Box N/A Diesel Only N/A Engine – Accessories 18 Rear Run Box Rear Hand Throttle N/A Diesel Only N/A Engine – Accessories 19 Rear Run Box Engine Hour Meter N/A Diesel Only N/A Engine – Accessories 20 Rear Run Box A/C Hour Meter N/A Diesel Only N/A Engine – Accessories 21 Rear Run Box Voltmeter J1939 N/A Diesel Only N/A Engine – Accessories 22 Rear Run Box Oil Pressure Gauge J1939 N/A Diesel Only N/A Engine – Accessories 23 Rear Run Box Coolant Gauge J1939 N/A Diesel Only N/A Engine – Accessories 24 Mechanical Gauges - Murphy Oil Pressure and Coolant Temperature N/A Diesel Only N/A Engine - Accessories 25 Adjustable brake and accelerator pedals (minimum 3 in.) N/A Diesel Only N/A Other Option - Specify N/A N/A N/A
Engine - Diagnostics
Engine – Diagnostics 1 Cummins Inline 6 Adapter Kit, Insite Basic N/A Diesel Only N/A Engine – Diagnostics 2 Cummins Quickserve Online 1 Year Subscription N/A Diesel Only N/A Engine – Diagnostics 3 Cummins Quickserve Online each Additional Year Subscription N/A Diesel Only N/A Engine – Diagnostics 4 Cummins INSITE Diagnostic Program 1 Year Subscription N/A Diesel Only N/A Engine – Diagnostics 5 Cummins INSITE Diagnostic Program each Additional Year Subscription N/A Diesel Only N/A Engine – Diagnostics 6 ISL G Fold Up Wiring Diagram N/A Diesel Only N/A Other Option - Specify N/A N/A N/A
Engine - Tune Up Kit
Engine – Tune Up Kit 1 Cummins Tune - Up Kit (Includes the Following) N/A N/A N/A Engine – Tune Up Kit 2 Includes - Pressure Gauge N/A N/A N/A Engine – Tune Up Kit 3 Includes - Torque Wrench N/A N/A N/A Engine – Tune Up Kit 4 Includes - Oil Filter Wrench N/A N/A N/A Engine – Tune Up Kit 5 Includes - Engine Coolant & Fuel Wrench N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Engine – Tune Up Kit 6 Includes - Belt Tension Gauge N/A N/A N/A Engine – Tune Up Kit 7 Includes - Belt Tension Gauge N/A N/A N/A Engine – Tune Up Kit 8 Includes - Charge- A/C CAC Pressure Kit N/A N/A N/A Engine – Tune Up Kit 9 Includes - Engine Barring Gear N/A N/A N/A Engine – Tune Up Kit 10 Includes - Torque Wrench N/A N/A N/A Engine – Tune Up Kit 11 Includes - Roller Follower Rem. & Installation Tool N/A N/A N/A Engine – Tune Up Kit 12 Includes - Compucheck Fitting N/A N/A N/A Other Option - Specify N/A N/A N/A
Flare Box
Fare Box 1 No Fare box, Power Circuit and Ground strap only N/A N/A N/A Fare Box 2 GFI 36" Fastfare N/A N/A N/A Fare Box 3 GFI 36" Odyssey N/A N/A N/A Fare Box 4 GFI 41" Fast Fare N/A N/A N/A Fare Box 5 GFI 41" Odyssey N/A N/A N/A Fare Box 6 Diamond Model H w/Two (2) Vaults N/A N/A N/A Fare Box 7 Diamond Model SV w/Two (2) Vaults N/A N/A N/A Fare Box 8 Main T1 Fare box w/Two V1 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 9 Main M 4 Fare box w/Two V4 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 10 Main SL 5 Fare box w/Two V5 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 11 Cubic Fare box N/A N/A N/A Fare Box 12 Denominator Manual Passenger Counter N/A N/A N/A Fare Box 14 Globe Transfer Cutter N/A N/A N/A Other Option - Specify N/A N/A N/A
HVAC
HVAC 1 Thermo King System (Per Technical Specification) N/A N/A N/A HVAC 2 TK Intelligaire 3 W/X 616 Compressor, R134A, Reliance Brushless Cond. & Evap.

Motors N/A N/A N/A
HVAC 3 TK System w/General Electric Field Wound Motors (Cond & Evap) N/A N/A N/A HVAC 4 TK System w/General Electric P.M. Motors N/A N/A N/A HVAC 5 TK System w/X430Compressor N/A N/A N/A HVAC 6 TK System w/S391 Screw Compressor N/A N/A N/A HVAC 7 TK System w/S616 Screw Compressor N/A N/A N/A HVAC 8 TK Electric HVAC System N/A N/A N/A HVAC 9 TK Pressure and Return Gauges Mounted to Unit N/A N/A N/A HVAC 10 R407c Refrigerant N/A N/A N/A HVAC 11 MCC Drivers Heater W/Brushless Motors N/A N/A N/A HVAC 12 MCC Drivers Heater W/Brush Motors N/A N/A N/A HVAC 13 MCC Front Stepwell/Threshold Heater W/Brushless Motor (Each) N/A N/A N/A HVAC 14 MCC Underseat/Rear Stepwell Heater W/Brushless Motor (Each) N/A N/A N/A HVAC 15 MCC Underseat/Rear Stepwell Heater W/Brush Motor (Each) N/A N/A N/A HVAC 16 Sutrak All Electric Air Conditioning - Roof Mount N/A N/A N/A HVAC 17 Sutrak All Electric Air Conditioning - Rear Mount N/A N/A N/A HVAC 18 ACT Convection Heater N/A N/A N/A HVAC 19 ACT Espar Fuel-Fired Supplemental Coolant Heater N/A N/A N/A HVAC 20 Warm Welcome Mat (Rear Door) N/A N/A N/A HVAC 21 Warm Welcome Mat (Installed on W/C Ramp) N/A N/A N/A HVAC 22 Eberspacher AC 136 G3 AE N/A N/A N/A HVAC 23 Air Purification System N/A N/A N/A Other Option - Specify N/A N/A N/A
HVAC Special Purpose
HVAC Special Purpose 1 TK Intelligaire - Diagnostics N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 HVAC Special Purpose 2 Carrier Micromax ATE Diagnostics N/A N/A N/A HVAC Special Purpose 3 Webasto Diagnostic Tool N/A N/A N/A HVAC Special Purpose 4 Van Steenburgh Regional Recovery System (JV90- 1) N/A N/A N/A HVAC Special Purpose 5 Eberspacher diagnostics N/A N/A N/A Other Option - Specify N/A N/A N/A
Manuals
Manuals 1 Drivers Handbook (1 Manual/1 CD per Bus Order) N/A N/A N/A Manuals 2 Service Manual (1 Manual/1 CD per Bus Order N/A N/A N/A Manuals 3 Parts Manual (1 Manual/1CD per Bus Order) N/A N/A N/A Manuals 4 Electrical Schematics (1 Manual/1CD per Bus Order) N/A N/A N/A Manuals 5 Vendor Manuals (1 Manual/1 CD per Bus Order) N/A N/A N/A Manuals 6 Additional Driver's Handbook N/A N/A N/A Manuals 8 Additional Parts Manuals N/A N/A N/A Manuals 9 Additional Electrical Schematics N/A N/A N/A Manuals 10 Additional Electrical Multiplex N/A N/A N/A Manuals 11 Additional Cummins ISL Manuals (4 Books) N/A N/A N/A Manuals 12 Additional Allison B400 Manuals (6 Books) N/A N/A N/A Manuals 13 Additional ZF 6hp594 Manuals (5 Books) N/A N/A N/A Manuals 14 Additional Voith Manuals (7 Books) N/A N/A N/A Manuals 15 Additional Amerex Manuals N/A N/A N/A Manuals 16 Additional TRW Steering Gear Manuals N/A N/A N/A Manuals 17 Additional Thermo King Manual N/A N/A N/A Manuals 18 Additional Carrier HVAC Manuals (2 Books) N/A N/A N/A Other Option - Specify N/A N/A N/A
Safety
Safety 2 Amerex V-25lb ABC System N/A N/A N/A Safety 3 Amerex VH-25lb ABC Cylinder N/A N/A N/A Safety 4 Amerex V-30lb ABC Cylinder N/A N/A N/A Safety 5 Amerex Fire Suppression System w/Automatic Shutdown, Programmable Heat Detectors (PHDs) and Automatic Maintenance Testing (AMT) N/A N/A N/A Safety 6 Amerex Safety Net 2-Zone Fire Detection/Suppression System N/A N/A N/A Safety 7 Jomar Firestick Liquid N/A N/A N/A Safety 8 Kidde - Dual Spectrum N/A N/A N/A Safety 9 Kidde - Ltd Spectrum N/A N/A N/A Safety 10 Kidde TLSE Spectrum N/A N/A N/A Safety 11 Fogmaker Fire Suppression System (water mist) N/A N/A N/A Safety 14 Firetrace Automatic Fire Detection/Suppression System (gas detection base system) N/A N/A N/A Safety 15 Remove Amerex N/A N/A N/A Safety 16 Fire Extinguisher and Safety Triangle Kit N/A N/A N/A Safety 17 Twenty - Four Unit First Aid Kit N/A N/A N/A Safety 18 Ten Unit First Aid Kit N/A N/A N/A Safety 19 Blood Borne Pathogens Kit N/A N/A N/A Safety 20 Bio - Hazard Disposal Kit N/A N/A N/A Safety 21 High Temperature Protective Sleeves for Component Lines N/A N/A N/A Safety 22 (3) 20 - Minute Road Flares N/A N/A N/A Safety 23 Wheel Chocks (Per Set) N/A N/A N/A Safety 24 Electric - Standard no fire suppression N/A N/A N/A Other Option - Specify N/A N/A N/A
Steering
Steering 1 Ross Model TS 65 N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Steering 2 Sheppard Model M110 N/A N/A N/A
Steering 3 TRW Electric Assisted Steering N/A N/A N/A Steering 4 TRW TAS6505 N/A N/A N/A Steering 5 Standard Size Padded Steering Wheel N/A N/A N/A Steering 6 Douglas Autotech 'Double-Knuckle' Steering Column (PN 9003148-C) N/A N/A N/A Other Option - Specify N/A N/A N/A
Towing & Hoisting
Towing & Hoisting 1 Set Towing Adapters/Tow Bar N/A N/A N/A Towing & Hoisting 2 Set of Hoist Adapters (Includes the 4 Following Items) N/A N/A N/A Towing & Hoisting 3 Incl w/set - Front Saddle N/A N/A N/A Towing & Hoisting 4 Incl w/set - Front Adapters N/A N/A N/A Towing & Hoisting 5 Incl w/set - Rear Saddle N/A N/A N/A Towing & Hoisting 6 Incl w/set - Rear Adapters N/A N/A N/A Towing & Hoisting 7 Front towing point N/A N/A N/A Towing & Hoisting 8 Rear towing point N/A N/A N/A Other Option - Specify N/A N/A N/A
Training
Training 1 none N/A N/A N/A Training 2 Operator Orientation - 4 Hours, (Procuring Agency) N/A N/A N/A Training 3 Operator Orientation - 8 Hours, (Procuring Agency) N/A N/A N/A Training 4 Operator Orientation - Additional hours of training, per hour N/A N/A N/A Training 5 Maintenance Orientation - 4 Hours, (Procuring Agency) N/A N/A N/A Training 6 Maintenance Orientation - 24 Hours, (Procuring Agency) N/A N/A N/A Training 7 Maintenance Orientation - 32 Hours, (Procuring Agency) N/A N/A N/A Training 8 Maintenance Orientation - Additional hours of training, per hour N/A N/A N/A Training 9 Technical Training - 96 Hours, (Procuring Agency) Price Proposal Form N/A N/A N/A Training 10 Technical Training - Additional hours of training, per hour N/A N/A N/A Training 11 OEM Training - Two Slots for "Train the Trainers" Technical Instruction N/A N/A N/A Training 12 OEM Training - Additional Slots for "Train the Trainers" Technical Instruction N/A N/A N/A Training 13 Body, Chassis, Suspension and Steering - (8 Hour Class), Procuring Agency N/A N/A N/A Training 14 Body, Chassis, Suspension and Steering - (24 Hour Class), Procuring Agency N/A N/A N/A Training 15 Body, Chassis, Suspension and Steering - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 16 Electrical and Electronics - (8 Hour Class), Procuring Agency N/A N/A N/A Training 17 Electrical and Electronics - (24 Hour Class), Procuring Agency N/A N/A N/A Training 18 Electrical and Electronics - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 19 Air and Brake Systems - (24 Hour Class), Procuring Agency N/A N/A N/A Training 20 Air and Brake Systems - (8 Hour Class), Procuring Agency N/A N/A N/A Training 21 Air and Brake Systems - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 22 HVAC and Climate Controls - (4 Hour Class), Procuring Agency N/A N/A N/A Training 23 HVAC and Climate Controls - (8 Hour Class), Procuring Agency N/A N/A N/A Training 24 HVAC and Climate Controls - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 25 Engine - (8 Hour Class), per Student at Procuring Agency N/A N/A N/A Training 26 Engine - (24 Hour Class), per Student at Procuring Agency N/A N/A N/A Training 27 Engine - additional hour of training per hour, per Student at Procuring Agency N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 28 Transmission - (8 Hour Class), per Student, at Procuring Agency N/A N/A N/A Training 29 Transmission - (24 Hour Class), per Student, at Procuring Agency N/A N/A N/A Training 30 Transmission - Additional hour of training per hour, per Student, at Procuring Agency N/A N/A N/A Training 31 Wheelchair Ramp - (2 Hour Class), at Procuring Agency N/A N/A N/A Training 32 Wheelchair Ramp - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 33 Wheelchair Ramp - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 34 Destination Sign - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 35 Destination Sign - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 36 Destination Sign - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 38 Axles and Tires - Procuring Agency. Included in Body/Chassis N/A N/A N/A Training 39 Fire Suppression - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 40 Fire Suppression - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 41 Fire Suppression - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 42 Engine OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 43 Engine OEM Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 44 Engine OEM Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 45 Transmission Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 46 Transmission Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 47 Transmission Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 48 Data Communications System OEM Training (4 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 49 Data Communications System OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 50 Data Communications System OEM Training (Additional hour of training per hour, 2 Persons), at Local Dealer N/A N/A N/A Training 51 Hybrid Drive - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 52 Hybrid Drive - (24 Hour Class), at Procuring Agency N/A N/A N/A Training 53 Hybrid Drive - (Additional hour of training per hour), at Procuring Agency N/A N/A N/A Training 54 Hybrid Drive OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 55 Hybrid Drive OEM Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 56 Hybrid Drive OEM Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 57 Hybrid Transmission Training - (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 58 Hybrid Transmission Training - (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 59 Hybrid Transmission Training - (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 60 Additional training … N/A N/A N/A
Other Option - Specify N/A N/A N/A
Training Equipment
Modules
Training Equipment
Modules 1 Fare Collection OEM Training (2 Persons), At Local Dealer N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training Equipment
Modules 2 ISL/Voith D864.5 N/A N/A N/A
Training Equipment
Modules 3 ISL/ZF 6AP1400B N/A N/A N/A
Training Equipment
Modules 4 ISL/ZF HP594 N/A N/A N/A
Training Equipment
Modules 5 ISX 12 G N/A N/A N/A
Training Equipment
Modules 6 ISL G N/A N/A N/A
Training Equipment
Modules 7 HVAC Training Module N/A N/A N/A
Training Equipment
Modules 8 I/O Controls Multiplex Board N/A N/A N/A
Training Equipment
Modules 9 Air Brake Training Board N/A N/A N/A
Training Equipment
Modules 10 ISB 6.7 N/A N/A N/A
Training Equipment
Modules 11 ISL/B400R Power Plant N/A N/A N/A
Other Option - Specify N/A N/A N/A
Transmission
Transmission 1 Allison B- 400R, GEN IV N/A N/A N/A Transmission 2 Allison B- 500R, GEN IV N/A N/A N/A Transmission 3 Allison B- 500, GEN V N/A N/A N/A Transmission 4 Allison B- 500R, GEN V N/A N/A N/A Transmission 5 Voith D854.6 N/A N/A N/A Transmission 6 ZF 6AP1400B N/A N/A N/A Transmission 7 ZF 6HP594 N/A N/A N/A Transmission 8 "Transynd" Synthetic N/A N/A N/A Transmission 9 Titan Probalizer OD- 1014 N/A N/A N/A Transmission 10 Davco Electronic Fluid Level Gauge N/A N/A N/A Transmission 11 Keyed Transmission Lockout Switch on Dash N/A N/A N/A Transmission 12 Transmission Oil Temperature Gauge (Dash and Rear Run Box) N/A N/A N/A Transmission 13 Electric Transmission - 2 speed N/A N/A N/A Transmission 14 Electric Transmission - 4 speed N/A N/A N/A Other Option - Specify N/A N/A N/A
Transmission
Diagnostics
Transmission Diagnostics 1 Allison Cable & Software N/A N/A N/A Transmission Diagnostics 2 Voith Cable & Software N/A N/A N/A Transmission Diagnostics 3 Voith Service Tool Kit N/A N/A N/A Transmission Diagnostics 4 Set of ZF Diagnostics (Includes the 3 Following Items) N/A N/A N/A Transmission Diagnostics 5 Includes - Testman Diagnostic System N/A N/A N/A Transmission Diagnostics 6 Includes - SAE Cable N/A N/A N/A Transmission Diagnostics 7 Includes - Ecomat Testman Software N/A N/A N/A Other Option - Specify N/A N/A N/A
W/C Restraints
W/C Restraints 1 AMSECO - A.R.M. N/A N/A N/A W/C Restraints 2 AMSECO Reliant Mobility Aid Securement System N/A N/A N/A W/C Restraints 3 AMESCO Passive rear-facing restraints (rear facing barriers) N/A N/A N/A W/C Restraints 4 USSC - First N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 W/C Restraints 5 Freedman - First N/A N/A N/A
W/C Restraints 6 Q'Straint - QRT N/A N/A N/A W/C Restraints 7 Q'Straint - ORT 360 N/A N/A N/A W/C Restraints 8 Q'Straint - Q'UBE 3- Point Securement Station N/A N/A N/A W/C Restraints 9 Q'Straint - Quantum Securement System N/A N/A N/A W/C Restraints 10 Q'Strant/Sure-Lok - OMNI Floor Anchor System N/A N/A N/A W/C Restraints 11 Q’Straint Slide N Click floor mount restraint system N/A N/A N/A W/C Restraints 12 Q- Pod W/C Restraint System N/A N/A N/A W/C Restraints 13 AMESCO Dual Auto Lock W/C Restraint System N/A N/A N/A W/C Restraints 14 USSC - V- PRO N/A N/A N/A W/C Restraints 15 Sure LOK - RTT Electric N/A N/A N/A W/C Restraints 16 Sure LOK - RTT Manual N/A N/A N/A W/C Restraints 17 Additional L-track per/foot N/A N/A N/A W/C Restraints 18 RESNA WC18 compliant restraint N/A N/A N/A W/C Restraints 19 RESNA WC19 compliant restraint N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel Chair Ramp
(low-floor only) / Lift
(high-floor only)
Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
1 Lift- U Model LU11, 1:6 Ratio, Front Door only N/A N/A N/A Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
2 LIFT- U Model LU18, Dual- Mode 1:6 (Street)/1:8 (Sidewalk) N/A N/A N/A Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
3 Ricon 6:1 SA Self-Leveling Ramp N/A N/A N/A

N/A N/A N/A
Wheel - Brakes
Wheel – Brakes 1 S - Cam Drum w/Wabsco ABS System - (DEDUCT) N/A N/A N/A Wheel – Brakes 2 Front Wheel Drum Brakes - (DEDUCT) N/A N/A N/A Wheel – Brakes 3 Rear Wheel Drum Brakes - (DEDUCT) N/A N/A N/A Wheel – Brakes All Wheel Drum Brakes N/A N/A N/A Wheel – Brakes 4 MGM “E-Stroke” Electronic Brake Monitoring System – Disc Brakes N/A N/A N/A Wheel – Brakes 5 MGM “E-Stroke” Electronic Brake monitoring System – Drum Brakes N/A N/A N/A Wheel – Brakes 6 All Wheel Disc Brakes N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel - Hubometer
Wheel Hubometer 1 none N/A N/A N/A Wheel Hubometer 2 Veeder Root w/o Tenths w/o Guard N/A N/A N/A Wheel Hubometer 3 S&A Fleetwatch 392 Electronic N/A N/A N/A Wheel Hubometer 4 E J Ward Data System (Includes Receiver, Display Unit and Antenna) N/A N/A N/A Wheel Hubometer 5 Engler (Stemco) Mechanical W/o Tenths W/o Guard N/A N/A N/A Wheel Hubometer 6 Engler Hubometer W/Powder Coat Guard N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel - Hubs
Wheel Hubs 1 Hub Piloted Wheels and Axles W/Grease Seals N/A N/A N/A Wheel Hubs 2 Hub Piloted w/Oil Seals (per Axle) N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Wheel Hubs 3 Stud Piloted Wheels and Axles w/Grease Seals N/A N/A N/A Wheel Hubs 4 Stud Piloted Wheels and Axles w/Oil Seals N/A N/A N/A Wheel Hubs 5 Wabco Traction Control N/A N/A N/A Wheel Hubs 6 Hydraulic drop down snow chain system N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel - Tires
Wheel – Tires 1 Customer Supplied N/A N/A N/A Wheel – Tires 2 Michelin XZU2 (305/85R/22.5) N/A N/A N/A Wheel – Tires 3 Michelin XZU2 (305/70R/22.5) N/A N/A N/A Wheel – Tires 4 Michelin X incity Z (305/70R/22.5) N/A N/A N/A Wheel – Tires 5 Michelin XZU3 (305/85/22.5) N/A N/A N/A Wheel – Tires 6 Michelin XZU2 (275/70R/22.5) N/A N/A N/A Wheel – Tires 7 Michelin XZE2+(H) (295/80/R22.5) N/A N/A N/A Wheel – Tires 8 G152 (305/85R/22.5) N/A N/A N/A Wheel – Tires 9 Goodyear G152 (305/70R/22.5) N/A N/A N/A Wheel – Tires 10 Goodyear G152 (275/70R/22.5) N/A N/A N/A Wheel – Tires 11 Firestone 18J (315/80R/22.5) N/A N/A N/A Wheel – Tires 12 Firestone 16H (305/70R/22.5) N/A N/A N/A Wheel – Tires 13 Bridgestone 16H (275/70R/22.5) N/A N/A N/A Wheel – Tires 14 Tire Pressure Monitoring System N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheels
Wheels 1 (7) Powder Coated Steel Wheels (White and Black) N/A N/A N/A Wheels 2 (7) Aluminum Alcoa - Full Polish N/A N/A N/A Wheels 3 (7) Aluminum Alcoa - Full Polish W/Dura Bright Finish N/A N/A N/A Wheels 4 (7) Aluminum Alcoa - Machine Finish N/A N/A N/A Wheels 5 (7) Aluminum Alcoa - Machine Finish W/Dura Bright Finish N/A N/A N/A Wheels 6 Remove Spare Wheel N/A N/A N/A Wheels 7 Add Dura Flange to Alcoa N/A N/A N/A Other Option - Specify N/A N/A N/A
Windows
Windows 2 Laminated Safety Glass (1/4") - Framed Sliders N/A N/A N/A Windows 3 Laminated Safety Glass (1/4") - Framed Fixed N/A N/A N/A Windows 4 Laminated Safety Glass (1/4") - Framed Transom - openable N/A N/A N/A Windows 5 Hidden Framed Bonded - Fixed N/A N/A N/A Windows 6 Hidden Framed Bonded - Transom -openable N/A N/A N/A Windows 7 Add Window Guards (Acrylic Liner and Film) N/A N/A N/A Windows 8 anti-graffiti 3M film (per inside window) N/A N/A N/A Windows 9 Stormite flush-mount serviceable w/tip N/A N/A N/A Windows 10 All windows equipped with liners attached N/A N/A N/A Other Option - Specify N/A N/A N/A
Other Items
Other Items 1 Brake System Diagnostics N/A N/A N/A Other Items 2 Meritor Software (Tool Box), Serial Link/Interface Kit N/A N/A N/A Other Items 3 Engine Dolly N/A N/A N/A Other Items 4 Phillips Thermo Block Heater N/A N/A N/A Other Items 5 Engine Skid Protection N/A N/A N/A Other Items 6 Mobile Receiver for S&A 392 Hubometer N/A N/A N/A Other Items 7 Floor Mounted 4 -Way Flasher Switch N/A N/A N/A Other Items 8 Cup Holder N/A N/A N/A Other Items 9 Auxiliary Drivers Fan N/A N/A N/A Other Items 10 Stainless Steel Trash Bag Holder N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Items 11 Transfer Cutter N/A N/A N/A
Other Items 12 Keyed Ignition Switch N/A N/A N/A Other Items 13 Fiber Optic Backlighting on Drivers Dash N/A N/A N/A Other Items 14 Exterior Ad Frame - Front 21" X 40" N/A N/A N/A Other Items 15 Exterior Ad Frame - Curbside 30" X 88" N/A N/A N/A Other Items 16 Exterior Ad Frame -Streetside 30" X 144" N/A N/A N/A Other Items 17 Exterior Ad Frame Rear 21" X 72" N/A N/A N/A Other Items 18 I/O Controls LED Interior Lights N/A N/A N/A Other Items 19 Pretoria LED Interior Lights N/A N/A N/A Other Items 20 See II Transit Airfoil N/A N/A N/A Other Items 21 Open Bottom Racks N/A N/A N/A Other Items 22 Suburban Package Racks/Open Bottom N/A N/A N/A Other Items 23 Twin Automatic Greasing System N/A N/A N/A Other Items 24 EMCO -Wheaton Posi -Lock Nozzle N/A N/A N/A Other Items 25 Hybrid Drive Tools N/A N/A N/A Other Items 26 Special Purpose Hybrid Drive Tool Kit N/A N/A N/A Other Items 27 BAE (APS2) beltless power pack N/A N/A N/A Other Items 28 WABCO E-COMP N/A N/A N/A Other Items 29 ISB 6.7 Fold Up Wiring Diagram (hybrid option) N/A N/A N/A Other Items 30 Allison Hybrid Manuals N/A N/A N/A Other Items 31 BAE Hybrid Manuals N/A N/A N/A Other Items 32 Allison Mid-Life Overhaul Parts List and Cost N/A N/A N/A Other Items 33 BAE Mid-Life Overhaul Part List and Cost N/A N/A N/A Other Items 34 winter weather package (heated front entrance) N/A N/A N/A Other Items 35 First Aid kit for 24 people option N/A N/A N/A Other Items 36 2 front dash-mounted fans to defrost front door N/A N/A N/A Other Items 37 driver’s LED reading light N/A N/A N/A Other Items 38 driver’s sun visors N/A N/A N/A Other Items 39 driver’s foot controls- adjustable Kongsberg system N/A N/A N/A Other Items 40 Stainless Steel molding to cover edges on entrance and rear rise on passenger assist N/A N/A N/A
Other Items 41 Separate control for non-synchronized wipers N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Category Item # Description Diesel CNG Hybrid Electric Fuel Cell Price Body BRT STYLING
Body – BRT STYLING 1 Standard Styling Package 59 passenger seats N/A N/A N/A N/A N/A N/ABody – BRT STYLING 2 BRT Exterior Styling Package (Front & Rear) with One Piece Windshield N/A N/A N/A N/A N/A N/A Body – BRT STYLING 3 BRT Roof Fairings Front and Rear N/A N/A N/A N/A N/A N/ABody – BRT STYLING 4 Curbside A Post Skid Plate N/A N/A N/A N/A N/A N/A

BODY - PASSENGER SEATS
BODY - PASSENGER SEATS 1 59 Passenger Seating N/A N/A N/A N/A N/A N/ABODY - PASSENGER SEATS 2 ADD additional double flip seat in lieu of fixed seat N/A N/A N/A N/A N/A N/ABODY - PASSENGER SEATS 3 Remove one set of fixed seats N/A N/A N/A N/A N/A N/ABODY - PASSENGER SEATS 4 remove individual seat N/A N/A N/A N/A N/A N/A Engine
Engine 1 Cummins ISL-G 320 HP N/A N/A N/A N/A N/A N/AEngine 2 Cummins ISX-G 12 400 HP N/A N/A N/A N/A N/A N/AEngine 3 Cummins ISL 9 330 HP N/A N/A N/A N/A N/A N/AEngine 4 Cummins ISX 12 425 HP N/A N/A N/A N/A N/A N/AEngine 5 Cummins ISL 9 330 HP N/A N/A N/A N/A N/A N/A Exhaust
Exhaust 1 none N/A N/A N/A N/A N/A N/A
Exhaust 2 Diesel Particulate Filter (Active) N/A N/A N/A N/A N/A N/A Exhaust 3 none N/A N/A N/A N/A N/A N/A
Exhaust 4 Diesel Particulate Filter (Active) N/A N/A N/A N/A N/A N/A Exhaust 5 none N/A N/A N/A N/A N/A N/A
Exhaust 6 Electric N/A N/A N/A N/A N/A N/AExhaust 7 Not Applicable N/A N/A N/A N/A N/A N/A Fuel
Fuel 1 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/A
Fuel 2 NGV2-3 Type 3 Complete CNG Cylinder (Vendor will list GGE) N/A N/A N/A N/A N/A N/A Fuel 3 NGV 2-4 Type 4 Complete CNG Cylinder (Vendor will list GGE) N/A N/A N/A N/A N/A N/AFuel 4 Hexagon Lincoln's TUFFSHELL Roof Mount Package N/A N/A N/A N/A N/A N/AFuel 5 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) N/A N/A N/A N/A N/A N/A Fuel 6 EMCO - Posi/Lock Blue Urea Dispensing System N/A N/A N/A N/A N/A N/A Fuel 7 Standard Gravity Fill N/A N/A N/A N/A N/A N/AFuel 8 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/A Fuel 9 125 Gallon Net Useable (60ft Bus) N/A N/A N/A N/A N/A N/A Fuel 10 EMCO - WHEATON Posi/Lock 105 (Flip Cap and Twist Cap) N/A N/A N/A N/A N/A N/A Fuel 11 EMCO - Posi/Lock Blue Urea Dispensing System N/A N/A N/A N/A N/A N/A Fuel 12 Standard Gravity Fill N/A N/A N/A N/A N/A N/AFuel 13 Fuel Gauge on Dash N/A N/A N/A N/A N/A N/A Fuel 14 125 Gallon Net Useable (60ft Bus) N/A N/A N/A N/A N/A N/A Fuel Filter
Fuel Filter 1 Low Fuel Alarm N/A N/A N/A N/A N/A N/A
Fuel Filter 2 Low Fuel Alarm N/A N/A N/A N/A N/A N/A
Fuel Filter 3 Spin on Primary and Secondary Fuel Filters N/A N/A N/A N/A N/A N/A Fuel Filter 4 Davco Fuel Pro 384, Heated N/A N/A N/A N/A N/A N/A Fuel Filter 5 Racor 490R30 Filter W/Thumbpump N/A N/A N/A N/A N/A N/AFuel Filter 6 Low Fuel Alarm N/A N/A N/A N/A N/A N/A Fuel Filter 7 Spin on Primary and Secondary Fuel Filters N/A N/A N/A N/A N/A N/A Fuel Filter 8 Davco Fuel Pro 384, Heated N/A N/A N/A N/A N/A N/A Heavy Duty - 60 Foot
Options Price Sheet
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Fuel Filter 9 Racor 490R30 Filter W/Thumbpump N/A N/A N/A N/A N/A N/A Hybrid
Hybrid 1 none N/A N/A N/A N/A N/A N/A
Hybrid 2 none N/A N/A N/A N/A N/A N/A
Hybrid 3 Auxiliary Coolant Heater N/A N/A N/A N/A N/A N/A Hybrid 4 Allison EP40 Electric Drive System N/A N/A N/A N/A N/A N/AHybrid 5 Allison EP50 Electric Drive System N/A N/A N/A N/A N/A N/AHybrid 6 BAE Hybrid System HDS 200 - APS1-01K (1Kwh Battery w/Ultracaps) N/A N/A N/A N/A N/A N/A Hybrid 7 BAE Hybrid System HDS200 - APS3-32K (32KwH Battery) N/A N/A N/A N/A N/A N/AHybrid 8 BAE Hybrid System HDS300 - APS1-01K (1Kwh Battery w/Ultracaps) N/A N/A N/A N/A N/A N/AHybrid 9 BAE Hybrid System HDS300 - APS3-32K (32KwH Battery) N/A N/A N/A N/A N/A N/A Passenger Seat Options
Passenger Seat Options 1 57 Passenger Seating - Citiseat N/A N/A N/A N/A N/A N/APassenger Seat Options 2 AMSECO - 6468 N/A N/A N/A N/A N/A N/APassenger Seat Options 3 AMSECO - Insight N/A N/A N/A N/A N/A N/APassenger Seat Options 4 AMSECO - Metropolitan N/A N/A N/A N/A N/A N/APassenger Seat Options 5 AMSECO - 6466 N/A N/A N/A N/A N/A N/A Passenger Seat Options 6 AMSECO - 6566 N/A N/A N/A N/A N/A N/A Passenger Seat Options 7 AMSECO - 2005/6466 Suburbans N/A N/A N/A N/A N/A N/APassenger Seat Options 8 AMSECO Vision N/A N/A N/A N/A N/A N/APassenger Seat Options 9 AMSECO - Innovator 850 N/A N/A N/A N/A N/A N/APassenger Seat Options 10 AMSECO - Premier N/A N/A N/A N/A N/A N/APassenger Seat Options 11 AMSECO - 2000 Series Recliners N/A N/A N/A N/A N/A N/A Passenger Seat Options 12 AMSECO - VR50 Seat Inserts N/A N/A N/A N/A N/A N/A Passenger Seat Options 13 AMSECO - CR50 Seat Inserts N/A N/A N/A N/A N/A N/APassenger Seat Options 14 4 One - Angel N/A N/A N/A N/A N/A N/APassenger Seat Options 15 4 One Aries N/A N/A N/A N/A N/A N/APassenger Seat Options 16 4 One Brasil N/A N/A N/A N/A N/A N/A Passenger Seat Options 17 4 One - Citiseat N/A N/A N/A N/A N/A N/A Passenger Seat Options 18 4 One - Citipro N/A N/A N/A N/A N/A N/A Passenger Seat Options 19 4 One - Diablo N/A N/A N/A N/A N/A N/A Passenger Seat Options 20 4 One - Patriot N/A N/A N/A N/A N/A N/APassenger Seat Options 21 4 One Gemini Seating N/A N/A N/A N/A N/A N/A Passenger Seat Options 22 4 One Torino G N/A N/A N/A N/A N/A N/APassenger Seat Options 23 4 One Perch Seating (Articulated) N/A N/A N/A N/A N/A N/APassenger Seat Options 24 Kiel Ideo N/A N/A N/A N/A N/A N/A Passenger Seat Options 25 Kiel Esos N/A N/A N/A N/A N/A N/APassenger Seat Options 26 Add (3) Passenger Seats to Curbside Wheelwell N/A N/A N/A N/A N/A N/A Passenger Seat Options 27 Add (2) Passenger Seats to Curbside Wheelwell N/A N/A N/A N/A N/A N/A Passenger Seat Options 28 Hinged Rear Settee N/A N/A N/A N/A N/A N/APassenger Seat Options 29 110 v outlets with USB charging throughout seating layout N/A N/A N/A N/A N/A N/APassenger Seat Options 30 Dual USB charging station throughout seating layout N/A N/A N/A N/A N/A N/A Passenger Seat Options 31 Cup holders for each seat N/A N/A N/A N/A N/A N/APassenger Seat Options 32 Self-storing footrests for each seat N/A N/A N/A N/A N/A N/A Passenger Seat Options 33 Expanding mesh magazine holder on seat back N/A N/A N/A N/A N/A N/APassenger Seat Options 34 Three (3) point passenger restraint belts for each seat N/A N/A N/A N/A N/A N/A Category Item # Description Designation Propulsion (if applicable) Price Air
Air 1 Shop Air Connection (Milton S790) N/A N/A N/A
All options listed below are the same for each bus length worksheet.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Air 2 Bendix AD9, (300 ci Purge) N/A N/A N/A
Air 3 Bendix Adip, Heated N/A N/A N/A Air 4 Bendix Puraguard Air/Oil Separator N/A N/A N/A Air 5 Wabco SS 1800 Air Dryer, Heated N/A N/A N/A Air 6 Chicago Rawhide T2000 N/A N/A N/A Air 7 Chicago Rawhide Dual Turbo 2000 N/A N/A N/A Air 8 Graham White QBA 15 "Sludge Buster", Heated N/A N/A N/A Air 9 Kingston Auto Drain Valve At Ping Tank N/A N/A N/A Air 10 Terminate Kneeling Operation Sensor N/A N/A N/A Air 11 Wabco 37.4 cfm twin cylinder air compressor (ISB 6.7 engine only) N/A N/A N/A Other Option - Specify N/A N/A N/A
Body- Bike Rack
Body – Bike Rack 1 Sportworks Apex 3 - 3 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 2 Sportworks - 2 Position Bike, Black Powder Coated N/A N/A N/A Body – Bike Rack 3 Sportworks - 2 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 4 Sportworks - 3 Position Bike, Black Powder Coated N/A N/A N/A Body – Bike Rack 5 Sportworks - Trilogy 3 Position Bike, Stainless Steel N/A N/A N/A Body – Bike Rack 6 Midwest Bus - BYK RYK (Stainless Steel) N/A N/A N/A Body – Bike Rack 7 Bike Rack Deployed Lamp on Dash N/A N/A N/A Body – Bike Rack 8 Bike Rack 5" Spot Mirror N/A N/A N/A Body – Bike Rack 9 Bike Rack Mounted Advertising Frame, 14"X 44" N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Driver's Barrier
Body – Driver's Barrier 1 Wrap Around Fiberglass with Schedule Rack Cutouts N/A N/A N/A Body – Driver's Barrier 2 Wrap Around Fiberglass W/O Schedule Rack Cutouts N/A N/A N/A Body – Driver's Barrier 3 Plexiglass Drivers Security Enclosure N/A N/A N/A Body – Driver's Barrier 4 Flat Melamine, Two Piece N/A N/A N/A Body – Driver's Barrier 5 Flat Melamine, Two Piece, w/(4) Schedule Holders N/A N/A N/A Body – Driver's Barrier 6 Plexiglass Drivers Security Enclosure, two pieces N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Driver'Seat
Body – Driver Seat 1 Recaro Ergo Metro w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 2 Recaro MCII N/A N/A N/A Body – Driver Seat 3 USSC 9100 ALX w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 4 USSC 9100 ALX - 3 w/Fabric Seat and Back w/Gray Fabric Boxing N/A N/A N/A Body – Driver Seat 5 Add Headrest N/A N/A N/A Body – Driver Seat 6 Add Armrest (Right Side only) N/A N/A N/A Body – Driver Seat 7 Add Shoulder Belt N/A N/A N/A Body – Driver Seat 8 Add 3 -Point, Horizontally Adjustable D - Loop N/A N/A N/A Body – Driver Seat 9 Driver’s Seat Vacancy Alarm N/A N/A N/A Body – Driver Seat 10 Safety Orange Shoulder Belt (US SC ALX) N/A N/A N/A Body – Driver Seat 11 Silicon Foam At Lower Seat Cushion (USSC) N/A N/A N/A Body – Driver Seat 12 Holdsworth Fabric N/A N/A N/A Body – Driver Seat 13 FR Treated Foam (Recaro) N/A N/A N/A Body – Driver Seat 14 USSC Q90 ALX N/A N/A N/A Body – Driver Seat 15 USSC G2A -2pt Drivers Seat N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Exit Door
Body – Exit Door 1 Standard Melamine Panels on Lower Section Both Sides of Rear Exit Door N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Exit Door 2 Upper Clear Plexiglas Modesty Panels Both Sides of Rear Exit Door N/A N/A N/A Body - Exit Door 3 Accelerator Interlock when doors are open N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Floor Covering
Body – Floor Covering 1 Greenwood ACQ Plywood W/RCA Rubber N/A N/A N/A Body – Floor Covering 2 Altro Meta/Chroma Transfloor OR Gerflor Terabus Sirius/Helios N/A N/A N/A Body – Floor Covering 3 Altro wood safety (vinyl simulated woodgrain) N/A N/A N/A Body – Floor Covering 4 Gerflor Tarabus Gaya Wood (vinyl simulated woodgrain) N/A N/A N/A Body – Floor Covering 5 Composite Sub Floor N/A N/A N/A Body – Floor Covering 6 Rear Seat Riser for Forward Facing Seats N/A N/A N/A Body – Floor Covering 7 Front Seat Risersor for Forward Facing Seats (Each Side) N/A N/A N/A Body – Floor Covering 8 Pressure-preservative treated plywood N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Mirror,
Exterior
Body – Mirror, Exterior 1 Safe Fleet One Piece 8" x 8" Flat Glazing W/Stainless Steel Arms, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 2 Safe Fleet One Piece 8" x 8" Flat Glazing W/S.S. Arms, Manual W/6" Spot Mirror N/A N/A N/A Body – Mirror, Exterior 3 Safe Fleet 8" x 15" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 4 Safe Fleet 9" x 11" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 5 Safe Fleet 9" x 13" Class "A" 2 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 6 Safe Fleet 10" x 13:", 2 Piece (Flat & Convex), Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 7 Safe Fleet 10" x 11 " 1 Piece, Heated, Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 8 Rosco 8" x 15" 1 Piece, Heated Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 9 Lucerix Metagal 7" x 15" 2 Piece, Heated Remote Both Sides N/A N/A N/A Body – Mirror, Exterior 10 Velvac View-All System (Camera Mounted in Exterior Mirror W/LCD Screen in Driver Area) N/A N/A N/A Body – Mirror, Exterior 11 Velvac Hyperion Lane Change Guardian N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Mirror, Interior
Body – Mirror, Interior 1 Mirror - 8 1/2 " X 16" N/A N/A N/A Body – Mirror, Interior 2 Mirror - 4.75" X 15" N/A N/A N/A Body – Mirror, Interior 3 Mirror - Front Door 6" Round on Header Door N/A N/A N/A Body – Mirror, Interior 4 Mirror - Rear Exit Door/Step Well 12" Convex N/A N/A N/A Body – Mirror, Interior 5 Mirror - 8 1/2 " X 1" center N/A N/A N/A Body – Mirror, Interior 6 Mirror - 5" flat N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Paint & Decal
Body – Paint & Decal 1 One Color w/Roof Numbers N/A N/A N/A Body – Paint & Decal 2 (2) Colors, with and without Black Mask At Windows N/A N/A N/A Body – Paint & Decal 3 (3) Colors, with and without Black Mask At Windows N/A N/A N/A Body – Paint & Decal 4 Basic Decal Package (Up to Three Strips and Equivalent Design) N/A N/A N/A Body – Paint & Decal 5 Custom Paint/Decal Design (Per Purchasers' Spec) N/A N/A N/A Body – Paint & Decal 6 Clear Coat Complete Bus N/A N/A N/A Body – Paint & Decal 7 Remove Roof Numbers N/A N/A N/A Other Option - Specify N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body - Passenger
Signal
Body – Passenger Signal 1 Pullcords - Above Windows (Neutral Or Yellow) w/Touch Pad At W/C Positions N/A N/A N/A Body – Passenger Signal 2 Touch Tape (At Window Mullions) N/A N/A N/A Body – Passenger Signal 3 Button at Exit Door Vertical Stanchion N/A N/A N/A Body – Passenger Signal 4 Additional Amber Stop Request Lamp Mounted on Driver's Dash N/A N/A N/A Body – Passenger Signal 5 Button in the Parcel Rack N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Rear Door
Body – Rear Door 1 34" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 2 48" Wide Rear Door w/Full Driver Control (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 3 56" Wide Rear Door w/Full Driver Control (Air Open/Air Close) N/A N/A N/A Body – Rear Door 4 Electric Operated Front/Rear Door Motor and Control N/A N/A N/A Body – Rear Door 5 Passenger Open (Push Open/Spring Close) N/A N/A N/A Body – Rear Door 6 Touch Bars (Air Open/Spring Close) N/A N/A N/A Body – Rear Door 7 Touch Bars w/Driver Override N/A N/A N/A Body – Rear Door 8 Touch Tape in Place of Touch Bars N/A N/A N/A Body – Rear Door 9 Vapor Class Acoustic (Photo Sensor) N/A N/A N/A Body – Rear Door 10 Vapor V Touch (Electronic Touch Bar) N/A N/A N/A Body – Rear Door 11 Vapor Electric Transit Operator N/A N/A N/A Body – Rear Door 12 Vapor Electric Door Control / 1939 Interface N/A N/A N/A Body – Rear Door 13 Vapor Optical Pressure Wave Switch N/A N/A N/A Body – Rear Door 14 Exterior Air Release (Front Door Control Valve) N/A N/A N/A Body – Rear Door 15 Driver Push Button Door Controls N/A N/A N/A Body – Rear Door 16 Bode CADS All electric doors N/A N/A N/A Body – Rear Door 17 Remove Rear Door, Add Two Seats N/A N/A N/A Body – Rear Door 18 Ventura electric rear door N/A N/A N/A Body – Rear Door 19 Add Center Door (Articulated bus only) N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Roof Hatch
Body – Roof Hatch 1 Manual Hatch At Front and Rear Positions N/A N/A N/A Body – Roof Hatch 2 One (1) Roof Hatch Position - Rear N/A N/A N/A Body – Roof Hatch 3 Electric Hatch with Driver Control (per Position) N/A N/A N/A Body – Roof Hatch 4 Glass Hatch in Lieu of Standard N/A N/A N/A Body – Roof Hatch 5 Additional Roof Hatch Position N/A N/A N/A Other Option - Specify N/A N/A N/A
Body - Schedule Rack
Body – Schedule Rack 1 none N/A N/A N/A Body – Schedule Rack 2 Innocom Schedule Racks 3.75" x 7" x 1.5" N/A N/A N/A Body – Schedule Rack 3 Innocom Schedule Racks 8.62" x 1 1" x 1" N/A N/A N/A Body – Schedule Rack 4 22" x 21" Black, RH Load Open Back N/A N/A N/A Body – Schedule Rack 5 Transit Information Products - 19" x 21" OBIC 19/214P1LTRMC N/A N/A N/A Body – Schedule Rack 6 Transit Information Products - 19" x 21" OBICT10P2LTRMC N/A N/A N/A Other Option - Specify N/A N/A N/A
Body -
Stanchions/Grab Rails
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Body – Stanchions/Grab
Rails 1 Stainless Steel Stanchions and Grab Rails and Modesty Panel Tubes N/A N/A N/A Body – Stanchions/Grab
Rails 2 Powder Coated Vertical Stanchions, Grab Rails and Modesty Panel Tubes N/A N/A N/A Body – Stanchions/Grab
Rails 3 Powder Coated Vertical Stanchions only N/A N/A N/A Body – Stanchions/Grab
Rails 4 Farebox Guard Rail N/A N/A N/A
Body – Stanchions/Grab
Rails 5 Grab Rail Forward Wheel Housing N/A N/A N/A
Body – Stanchions/Grab
Rails 6 Luggage Rack 68", Two -Tier with Fixed Shelf's N/A N/A N/A Body – Stanchions/Grab
Rails 7 Vinyl Coated Nylon Grab Straps (Cost per Handle) N/A N/A N/A Body – Stanchions/Grab
Rails 8 SSTL Spring Loaded Grab Handle (Cost per Handle) N/A N/A N/A Body – Stanchions/Grab
Rails 9 non-vinyl-coated nylon grab straps (per handle, color to be chosen by agency) N/A N/A N/A Other Option - Specify N/A N/A N/A
Cooling System
Cooling System 1 Modine Side By Side By Side Plate Fin Radiator N/A N/A N/A Cooling System 2 Modine Electric Cooling Fan System N/A N/A N/A Cooling System 3 EMP Electric Cooling Fan System N/A N/A N/A Cooling System 4 Electric Fan Cooling System (Non EMP - Specify OEM) N/A N/A N/A Cooling System 5 Grayson Electric Cooling Fan System N/A N/A N/A Cooling System 6 Hydraulic Cooling Fan N/A N/A N/A Cooling System 7 L&M Radiator N/A N/A N/A Cooling System 8 Masabi Radiator N/A N/A N/A Cooling System 9 E - Coat Radiator, CAC & Hydraulic Cooler N/A N/A N/A Cooling System 10 Radiator Tank Guard N/A N/A N/A Cooling System 11 Double Breeze Constant Tension Clamps N/A N/A N/A Cooling System 12 Oetiker Constant Torque Clamps N/A N/A N/A Cooling System 13 Gates - Greenstripe Hose N/A N/A N/A Cooling System 14 Webasto Model Thermo 300 ( 104,000 btu ) Coolant Heater N/A N/A N/A Cooling System 15 Webasto Model Thermo 230 ( 80,000 btu ) Coolant Heater N/A N/A N/A Cooling System 16 Proheat Model X120 (120,000 btu) Coolant Heater N/A N/A N/A Cooling System 17 Proheat Model X80 ( 80,000 btu ) Coolant Heater N/A N/A N/A Cooling System 18 Proheat Model X50 ( 50,000 btu ) Coolant Heater N/A N/A N/A Cooling System 19 Proheat Model X45 ( 45,000 btu ) Coolant Heater N/A N/A N/A Cooling System 20 Electric Coolant Auxiliary Heater N/A N/A N/A Cooling System 21 Espar Model Hydronic #4 N/A N/A N/A Cooling System 22 Espar Model Hydronic #5 N/A N/A N/A Cooling System 23 Articulated Only? N/A N/A N/A Cooling System 24 EMP Electric Cooling Fan System N/A N/A N/A Cooling System 25 Electric Fan Cooling System (Non EMP - Specify OEM) N/A N/A N/A Cooling System 26 Double Breeze Constant Tension Clamps N/A N/A N/A Cooling System 27 Oetiker Constant Torque Clamps N/A N/A N/A Cooling System 28 Grayson Electric Cooling Fan System N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical
Electrical 1 Voltage Spike Arrestor, S.K.I. Products SKI241 -101445, or Approved Equal N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical 2 24 Volt to 13.6 Volt DC - DC Converter, 30 Ampere Output, Model 1645 - 24 - 12 - 30, Manufactured By Wilmore Electronics Co., Inc. or Equivalent N/A N/A N/A Electrical 3 Battery Voltage Equalizer N/A N/A N/A Electrical 4 24V battery isolation system (keeps house batteries from being drained by cameras, recorders, etc.) N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Accessories
Electrical – Accessories 1 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Drivers Area N/A N/A N/A Electrical – Accessories 2 12 V Cigarette-Style Light Adaptor for PC Auxiliary Power - Rear Air Return Grille Area N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Alternator
Not for Electric N/A N/A N/A
Electrical – Alternator 1 Delco 50 DN (270 AMP) N/A N/A N/A Electrical – Alternator 3 Penntex Px833 Alternator N/A N/A N/A Electrical – Alternator 4 Neihoff C - 701 (300 AMP) N/A N/A N/A Electrical – Alternator 5 Neihoff C - 703 (330 AMP) N/A N/A N/A Electrical – Alternator 6 Neihoff C - 803 (500 AMP) Air Cooled N/A N/A N/A Electrical – Alternator 7 EMP POWER 450 AMP Brushless Alternator N/A N/A N/A Electrical – Alternator 8 KA500 HIPRO (KHP 500-000) (475 AMP) N/A N/A N/A Electrical – Alternator 9 Marine Cabling for Charging System N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Automatic
Passenger Counter
Electrical – Automatic
Passenger Counter 1 none N/A N/A N/A
Electrical – Automatic
Passenger Counter 2 UTA Automatic Passenger Counter System with GPS, WLAN Capabilities N/A N/A N/A Electrical – Automatic
Passenger Counter 3 UTA APC Sensors, Cabling, CPU only N/A N/A N/A Electrical – Automatic
Passenger Counter 4 Wiring provisions IAW APC manufacture N/A N/A N/A Electrical – Automatic
Passenger Counter 5 Strategic Mapping APC system N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Auxiliary
Lights
Electrical – Auxiliary Lights 1 Four (4) 4" Diameter LED Auxiliary Brake Lights N/A N/A N/A Electrical – Auxiliary Lights 2 Two (2) 4" Diameter LED Auxiliary Brake Lights N/A N/A N/A Electrical – Auxiliary Lights 3 Two (2) Dialight 7" Diameter LED Auxiliary Brake Lights N/A N/A N/A Electrical – Auxiliary Lights 4 4 LED Brake Strip Lamps N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Auxiliary Lights 5 JKA Enterprises LED "Stop" Light N/A N/A N/A Electrical – Auxiliary Lights 6 Exterior Curb Lamps, Front & Rear - Dialight N/A N/A N/A Electrical – Auxiliary Lights 7 Triangle Amber LED Yield Sign - Dialight N/A N/A N/A Electrical – Auxiliary Lights 8 Two (2) Red LED Brake Strip Lamps N/A N/A N/A Electrical – Auxiliary Lights 9 Remove LED Auxiliary Brake Lights (DEDUCT) N/A N/A N/A Electrical – Auxiliary Lights 10 Overhead Farebox LED - Light W/Night - Day Switch (on Drivers Side Panel) - Light Illuminates W/Frt. Door Open and Switch in the Night Position N/A N/A N/A Electrical – Auxiliary Lights 11 Service Compartment Lights - LED N/A N/A N/A Electrical – Auxiliary Lights 12 LED Beacon Light N/A N/A N/A Electrical – Auxiliary Lights 13 LED Decal Lights (2) - Non - Flashing only (Per NHTSA) N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Battery &
Battery Chargers
Electrical - Battery & Battery
Chargers 1 Polyethylene battery tray and enclosure N/A N/A N/A Electrical – Battery &
Battery Chargers 2 (2) DEKA 8D Side and Top Post Connections (Standard for Diesel Bus) N/A N/A N/A Electrical – Battery &
Battery Chargers 3 (4) DEKA Group 32 Top Post N/A N/A N/A Electrical – Battery &
Battery Chargers 4 DEKA AGM Type 8D/Group 32 N/A N/A N/A Electrical – Battery &
Battery Chargers 5 (4) Odyssey Group 32 N/A N/A N/A
Electrical – Battery &
Battery Chargers 6 (4) Trojan Group 32 N/A N/A N/A
Electrical – Battery &
Battery Chargers 7 Ultra Capacitors - KBI KAPower N/A N/A N/A Electrical – Battery &
Battery Chargers 8 Anderson 350 Jump Start Connector (Each) N/A N/A N/A Electrical – Battery &
Battery Chargers 9 Remove Anderson 350 Jump Start N/A N/A N/A Electrical – Battery &
Battery Chargers 10 En-route Battery Charging system (please specify) N/A (electric only) N/A Electrical – Battery &
Battery Chargers 11 Inductive charging system for depot charging N/A (electric only) N/A Electrical – Battery &
Battery Chargers 12 Cable "Pigtail" Chargers N/A (electric only) N/A Electrical – Battery &
Battery Chargers 13 Battery Chargers N/A (electric only) N/A Electrical – Battery &
Battery Chargers 14 60 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 15 80 kW Charger and Dispenser N/A (electric only) N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Battery &
Battery Chargers 16 100 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 17 125 kW Charger and Dispenser N/A (electric only) N/A Electrical – Battery &
Battery Chargers 18 250 kW Inductive Charging In Route Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 19 250 kW Inductive Charging On-Board Receiver N/A (electric only) N/A Electrical – Battery &
Battery Chargers 20 350 kW on-route Charger N/A (electric only) N/A Electrical - Battery & Battery
Chargers 21 Wave Wireless Inductive chargin Equipment In Route Pad N/A (electric only) N/A Electrical - Battery & Battery
Chargers 22 Wave Wireless Inductive Charging Equipment Depot Level Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 23 Momentum Dynamics Wireless Inductive Charging Equipment In Route Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 24 Momentum Dynamics Wireless Inductive Charging Equipment Depot Level Pad N/A (electric only) N/A Electrical – Battery &
Battery Chargers 25 Momentum Dynamics Wireless Inductive Charging Equipment On Bus Receiver N/A (electric only) N/A Electrical – Battery &
Battery Chargers 26 Momentum Dynamics/Princeton power Wayside Battery storage-one megawatt with optional 500 kW N/A (electric only) N/A Electrical – Battery &
Battery Chargers 27 Electrical Management Software from Viriciti N/A (electric only) N/A 28 Energy Storage System = Battery Packs N/A N/A
Electrical – Battery &
Battery Chargers 29 260 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 30 320 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 31 440 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 32 500 KWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 33 660 kWh N/A (electric only) N/A
Electrical – Battery &
Battery Chargers 34 800 kWh N/A (electric only) N/A
Electrical - Battery & Battery
Chargers 35 Electric Trolley Bus Package N/A (electric only) N/A Electrical - Battery & Battery
Chargers 36 Other Option - Specify N/A N/A
Electrical -
Communication/Radi
o
Electrical –
Communication/Radio 1 Pre - Wire:12V/40A Direct Battery & 12V/10A Ignition (Route to RH Dash & Ele. Equip. Box) and Install Roof Mount RF/GPS/Cellular Antenna N/A N/A N/A Electrical –
Communication/Radio 2 Motorola XLT 2500, 10- 35 W, 800MHZ W/DEC Box and Silent Alarm Switch N/A N/A N/A Electrical –
Communication/Radio 3 Motorola XLT 5000 N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical –
Communication/Radio 4 Motorola APX4500 N/A N/A N/A
Electrical –
Communication/Radio 5 Motorola CM200 and CM300, 45W, 439 - 470- MHZ N/A N/A N/A Electrical –
Communication/Radio 6 Motorola CDM 1250 N/A N/A N/A
Electrical –
Communication/Radio 7 Harris Radio N/A N/A N/A
Electrical –
Communication/Radio 8 DC Power Filter for Radio Wiring N/A N/A N/A Electrical –
Communication/Radio 9 Hand - Held Microphone N/A N/A N/A Electrical –
Communication/Radio 10 Public Address System with Boom Mic N/A N/A N/A Electrical –
Communication/Radio 11 Additional Flush Mounted Speakers (per Pair) N/A N/A N/A Electrical –
Communication/Radio 12 ASP930T Radio Antenna with RG58 Coax Cable and TNC Connector N/A N/A N/A Electrical –
Communication/Radio 13 Antenna Specialist ASP- 572 N/A N/A N/A Electrical –
Communication/Radio 14 Customer Specified Two Way Radio and Installation N/A N/A N/A Electrical –
Communication/Radio 15 GPS Antenna W/Gasket (Trimble 502 Model 18334 and Approved Equal) with RG58 Coax Cable and F Type Male Connector to the VLU N/A N/A N/A Electrical –
Communication/Radio 16 customer specific antenna, ground plane, and cable runs installation N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Destination Sign
Electrical – Destination Sign 1 Twin Vision Silver Series Sign (16 X160) Front & Side N/A N/A N/A Electrical – Destination Sign 2 Twin Vision Silver Series Sign (24 X 200) Front & Side N/A N/A N/A Electrical – Destination Sign 3 Twin Vision Smart Series II (16 X160) Front & Side N/A N/A N/A Electrical – Destination Sign 4 Twin Vision Smart Series II (24 X 200) Front & Side N/A N/A N/A Electrical – Destination Sign 5 Twin Vision 100% Amber LED, Front, Curb Side, Rear N/A N/A N/A Electrical – Destination Sign 6 Twin Vision 100% Amber LED, Rear N/A N/A N/A Electrical – Destination Sign 7 Twin Vision Chroma I Color LED Front N/A N/A N/A Electrical – Destination Sign 8 Twin Vision Chroma IV 100% Color LED N/A N/A N/A Electrical – Destination Sign 9 Twin Vision 24 X 200 Front Amber LED Sign N/A N/A N/A Electrical – Destination Sign 10 Luminator SMT Horizon 100% Amber LED Front, Curbside, Rear N/A N/A N/A Electrical – Destination Sign 11 AXION with WI FI and Time and Date Time Stamp N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Destination Sign 12 Luminator Spectrum 100% Amber LED Front ,Curbside, Rear N/A N/A N/A Electrical – Destination Sign 13 Luminator White LED Front, Curb-side and Rear N/A N/A N/A Electrical – Destination Sign 14 Add Twin Vision Smart Series II w/ rear camera, Rear Sign N/A N/A N/A Electrical – Destination Sign 15 Add Street Side Sign (Twin Vision Amber LED) N/A N/A N/A Electrical – Destination Sign 16 Add Street Side Sign (Twin Silver Series LED) N/A N/A N/A Electrical – Destination Sign 17 Remove Rear Sign (DEDUCT) N/A N/A N/A Electrical – Destination Sign 18 Program Software (Twin Vision) N/A N/A N/A Electrical – Destination Sign 19 Luminator Programming Software USB Wireless N/A N/A N/A Electrical – Destination Sign 20 Transign Curtain Front and Side Sign N/A N/A N/A Electrical – Destination Sign 21 Heated Front Sign Glazing N/A N/A N/A Electrical – Destination Sign 22 Transign, (4) Character, Metal Housing N/A N/A N/A Electrical – Destination Sign 23 Transign, (3) Character, Metal Housing N/A N/A N/A Electrical – Destination Sign 24 Transign, (2) Character, D - 1 853, Metal Housing N/A N/A N/A Electrical – Destination Sign 25 Twin Vision Electronic Front Dash Sign N/A N/A N/A Electrical – Destination Sign 26 Hanover Display LED Amber Destination Signs (model# OL028, OL054 & OL64J) N/A N/A N/A Electrical – Destination Sign 27 Luminator Electronic Front Dash Sign N/A N/A N/A Electrical – Destination Sign 28 I/O controls Destination sign all Models N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Destination Sign
Programming
Electrical – Destination Sign
Programming 1 Luminator USB & Integrated Programing Software N/A N/A N/A Electrical – Destination Sign
Programming 2 Twin Vision Elyse 2 USB N/A N/A N/A
Electrical – Destination Sign
Programming 3 Twin Vision Software Package N/A N/A N/A
Other Option - Specify N/A N/A N/A
Electrical -
Diagnostics
Electrical – Diagnostics 1 Set of Multiplexing Diagnostics (Includes the 7 Following Items) N/A N/A N/A Electrical – Diagnostics 2 Incl w/set - Circuit Tester N/A N/A N/A Electrical – Diagnostics 3 Incl w/set - Program Loader N/A N/A N/A Electrical – Diagnostics 4 Incl w/set - Program N/A N/A N/A Electrical – Diagnostics 5 Incl w/set - ID Writer/Verification N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Diagnostics 6 Incl w/set - RS232/RS485 Converter N/A N/A N/A Electrical – Diagnostics 7 Incl w/set - Software, Real Time Ladder Logic N/A N/A N/A Electrical – Diagnostics 8 Incl w/set - Hand - Held Computer N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Equipment
Storage Box
Electrical – Equipment
Storage Box 1 none N/A N/A N/A
Electrical – Equipment
Storage Box 2 UTA APC Sensors, Cabling, CPU only N/A N/A N/A Electrical – Equipment
Storage Box 3 33"H X 20"D X 22.5"W, 13 - 42920F006 N/A N/A N/A Electrical – Equipment
Storage Box 4 33"H X 20"D X 22.5"W, 13 - 42920F006, w/2 - Doors N/A N/A N/A Electrical – Equipment
Storage Box 5 33"H X 20"D X 22.5"W, 13 - 42920F014, w/Louvered Back Panel N/A N/A N/A Electrical – Equipment
Storage Box 6 Strategic Mapping sensors, cabling, CPU only N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Lights,
Exterior
Electrical – Lights, Exterior 1 All Exterior Lights LED - Type Lamps N/A N/A N/A Electrical – Lights, Exterior 2 Headlight LED Dialight - Low Beam N/A N/A N/A Electrical – Lights, Exterior 3 Headlight LED Dialight - High Beam N/A N/A N/A Electrical – Lights, Exterior 4 Halogen Sealed Beam Headlights N/A N/A N/A Electrical – Lights, Exterior 5 Tail Lights - Manufacturer Dialite LED, Fixture Size - 7" Diameter N/A N/A N/A Electrical – Lights, Exterior 6 Tail Lights - Manufacturer Dialite LED, Fixture Size - 4" Diameter N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Intelligent
Vehicle Network
Electrical – Intelligent
Vehicle Network 1 none N/A N/A N/A
Electrical – Intelligent
Vehicle Network 2 Clever Devices IVN III W/Voice Annunciation, APC, Wireless LAN N/A N/A N/A Electrical – Intelligent
Vehicle Network 3 AVAIL IVN W/MDC, GPS, APC, WLAN N/A N/A N/A Electrical – Intelligent
Vehicle Network 4 Init Voice Enunciator/AVL/GPS/APC/WLAN N/A N/A N/A Electrical – Intelligent
Vehicle Network 5 Siemens Transit Master N/A N/A N/A
Electrical – Intelligent
Vehicle Network 6 Transloc Transit Visualization System AVL N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Intelligent
Vehicle Network 7 Orbital TMS CAD/AVL System W/Voice Annunciation, APC N/A N/A N/A Electrical – Intelligent
Vehicle Network 8 Intelligent Vehicle System Prewire only N/A N/A N/A Electrical – Intelligent
Vehicle Network 9 Mapping and Database Setup for GPS per Customer Requirement N/A N/A N/A Electrical – Intelligent
Vehicle Network 10 Trimble "Button" Antenna N/A N/A N/A Electrical – Intelligent
Vehicle Network 11 Low Profile Blade Antenna N/A N/A N/A Electrical – Intelligent
Vehicle Network 12 Strategic Mapping IVN N/A N/A N/A
Electrical – Intelligent
Vehicle Network 13 Complete INIT on-board ITS system, CoPilot PC, APC, CAD/AVL, Visual/Voice Stop Enunciator, Emergency button N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical -
Multiplexing
Electrical – Multiplexing 1 Dinex, I/O Controls G3 System N/A N/A N/A Electrical – Multiplexing 2 I/O Controls Wireless RF Module N/A N/A N/A Electrical – Multiplexing 3 I/O Controls, Gateway Module (Included in the ITS Prewire Option) N/A N/A N/A Electrical – Multiplexing 4 Vansco N/A N/A N/A Electrical – Multiplexing 5 VDO N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Pleasure
Electrical – Pleasure 1 none N/A N/A N/A Electrical – Pleasure 2 Radio Tacho Link Event Data Recorder N/A N/A N/A Electrical – Pleasure 3 Radio N/A N/A N/A Electrical – Pleasure 4 Radio Am/FM/CD N/A N/A N/A Electrical - Pleasure 5 On-Board entertainment system including 6 video screen DVD CD-ROM player N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Public
Announcement
Electrical – Public
Announcement 1 Drivers Speaker W/Separate Volume Control N/A N/A N/A Electrical – Public
Announcement 2 REI Model 750040 PA W/Handheld Mic W/(6) Flush Mounted Speakers N/A N/A N/A Electrical – Public
Announcement 3 Luminator IVS W/GPS Capability, w/LED Sign, W/O Mapping N/A N/A N/A Electrical – Public
Announcement 4 DR700 Vehicle Logic Unit W/GPS Capability, w/LED Sign, W/O Mapping N/A N/A N/A Electrical – Public
Announcement 5 Clever Devises - Speakeasy II N/A N/A N/A Electrical – Public
Announcement 6 Rei Echo PA System N/A N/A N/A
Electrical – Public
Announcement 7 Shure Brothers Lapel Microphone w/REI PA System N/A N/A N/A Electrical – Public
Announcement 8 Midwest Lapel Microphone (Use w/Voice Annunciation System) N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Public
Announcement 9 Interior LED Sign N/A N/A N/A
Electrical – Public
Announcement 10 One Additional Pair of Interior Speakers N/A N/A N/A Electrical – Public
Announcement 11 One Additional exterior Speaker Each N/A N/A N/A Electrical – Public
Announcement 12 REI w/switch mounted in Driver’s Area N/A N/A N/A Other Option - Specify N/A N/A N/A
Electrical - Video
Surveillance
Electrical – Video
Surveillance 1 none N/A N/A N/A
Electrical – Video
Surveillance 2 Apollo RoadRunner DVR 2TB 4 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 3 Apollo RoadRunner DVR 2TB 8 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 4 Apollo RoadRunner DVR 2TB 12 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 5 Apollo RoadRunner DVR 2TB 16 Camera System w/Audio N/A N/A N/A Electrical – Video
Surveillance 6 Apollo RoadRunner HDR DVR 2TB 4 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 7 Apollo RoadRunner HDR DVR 2TB 8 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 8 Apollo RoadRunner HDR DVR 2TB 12 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 9 Apollo RoadRunner HDR DVR 2TB 16 Camera System & Audio N/A N/A N/A Electrical – Video
Surveillance 10 Apollo Wireless Data Download capable N/A N/A N/A Electrical – Video
Surveillance 11 Apollo Cellular "Live Look Through" Capable N/A N/A N/A Electrical – Video
Surveillance 12 Apollo Vehicle Information Management System (ViM) N/A N/A N/A Electrical – Video
Surveillance 13 Apollo video 4K DVR w/9 camera system w/ Audio N/A N/A N/A Electrical – Video
Surveillance 14 Cole Hersee 12063 Electrical Tow Connector N/A N/A N/A Electrical – Video
Surveillance 15 (4) Camera Pre Wire Package N/A N/A N/A Electrical – Video
Surveillance 16 SEON TX8 8 channel w/1 TB hard drive N/A N/A N/A Electrical – Video
Surveillance 17 SEON DX-HD 13 channel w/1 TB hard drive N/A N/A N/A Electrical – Video
Surveillance 18 SEON 2 TB hard drive upgrade N/A N/A N/A Electrical – Video
Surveillance 19 SEON WP00AG4 Explorer DX12 and DX-HD Smart-Link 12 VDC module to DVR cable, diagnostic indicator/alarm button & harness, GPS4 receiver mount. N/A N/A N/A Electrical – Video
Surveillance 20 SEON CQ903A integrated IR Dome day/Night 600TVL interior camera, audio, 2.9 mm lens. N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 21 SEON CA904EI Day/Night 600TVL camera, exterior (w/infrared, no audio), 3.6 mm lens. N/A N/A N/A Electrical – Video
Surveillance 22 SEON CJ904A Dome Day/Night 600TVL camera, audio, 3.6mm lens w/mount N/A N/A N/A Electrical – Video
Surveillance 23 SEON CHW702EJ HD progressive scan camera, 16mm lens, exterior (no audio) and APPINJ POE injector w/mount. N/A N/A N/A Electrical – Video
Surveillance 24 SEON SRLGA07 Smart-Reach Lite, 2.4GHz Wireless bridge w/antenna N/A N/A N/A Electrical – Video
Surveillance 25 SEON HDD-STB Vmax View software, docking station & handheld mouse. N/A N/A N/A Electrical – Video
Surveillance 26 SEON LMK LCD monitor, 5.6 inch, AC charger, battery pack N/A N/A N/A Electrical – Video
Surveillance 27 Safety Vision RR6000 Pro w/(4) Digital Color Cameras, 120 GB DVR, w/Audio N/A N/A N/A Electrical – Video
Surveillance 28 Angel Trax - 6 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 29 Angel Trax - 8 HD/IR Camera System - 500 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 30 Angel Trax - 12 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-Fi ready N/A N/A N/A Electrical – Video
Surveillance 31 Angel Trax -16 HD/IR Camera System - 750 G HD Storage with SD Card Backup and Wi-F- ready N/A N/A N/A Electrical – Video
Surveillance 32 Angel Trax Upgrade to 1 Tb - Double Stacked 500 G HD N/A N/A N/A Electrical – Video
Surveillance 33 Angel Trax Live View, Live GPS, and System Health Notification option N/A N/A N/A Electrical – Video
Surveillance 34 March Network (8) Camera System N/A N/A N/A Electrical – Video
Surveillance 35 REI Bus Watch Digital N/A N/A N/A
Electrical – Video
Surveillance 36 TVSS Claim Safe III w/4 Digital Cameras N/A N/A N/A Electrical – Video
Surveillance 37 Mobileview IV Digital, (5) Cameras, 250 GB DVR, w/Audio N/A N/A N/A Electrical – Video
Surveillance 38 Mobilview PENTA DVR N/A N/A N/A
Electrical – Video
Surveillance 39 Mobileview MV3000 DVR N/A N/A N/A
Electrical – Video
Surveillance 40 Rear View Camera System N/A N/A N/A
Electrical – Video
Surveillance 41 Add Additional Color Camera N/A N/A N/A Electrical – Video
Surveillance 42 Central Station Mobileview (Kalatel) N/A N/A N/A Electrical – Video
Surveillance 43 Verint 4 Camera System N/A N/A N/A
Electrical – Video
Surveillance 44 Verint 5 Camera System N/A N/A N/A
Electrical – Video
Surveillance 45 Video Test Kit Mobileview IV - Kalatal N/A N/A N/A Electrical – Video
Surveillance 46 Desk Top Viewing Station (REI) N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Electrical – Video
Surveillance 47 Velvac Hyperion Virtual DVR (up to 7 camera views through dash mounted tablet) N/A N/A N/A Other Option - Specify N/A N/A N/A
Engine - Accessories
Engine – Accessories 1 Cummins Compucheck Fittings for (Air, Oil, Fuel & Coolant Testing) N/A Diesel Only N/A Engine – Accessories 2 Williams Controls 41 Degree Throttle Pedal N/A Diesel Only N/A Engine – Accessories 3 Williams Controls 45 Degree Throttle Pedal N/A Diesel Only N/A Engine – Accessories 4 Teleflex Adjustable Throttle and Brake Pedal N/A Diesel Only N/A Engine – Accessories 5 STD Donaldson (RBX00- 2277) - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 6 Ashcraft (25-1490a02L) - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 7 Filterminder # SP - 3832 - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 8 Donaldson Informer - Air Intake Restriction N/A Diesel Only N/A Engine – Accessories 9 Spin on Filters Supplied By Engine Manufacturer N/A Diesel Only N/A Engine – Accessories 10 By Pass Filter - Spinner - Bypass Model 976 N/A Diesel Only N/A Engine – Accessories 11 Sample Test Port - Titan Probalizer OD-1014 N/A Diesel Only N/A Engine – Accessories 12 FEMCO Oil Drain Plug N/A Diesel Only N/A Engine – Accessories 13 Magnetic Drain Plug N/A Diesel Only N/A Engine – Accessories 14 Test Ports Shall Be Provided for Commonly Checked Functions on the Bus N/A Diesel Only N/A Engine – Accessories 16 Rear Run Box Starter - Delco MT 42 - 24v Electric N/A Diesel Only N/A Engine – Accessories 17 Rear Run Box N/A Diesel Only N/A Engine – Accessories 18 Rear Run Box Rear Hand Throttle N/A Diesel Only N/A Engine – Accessories 19 Rear Run Box Engine Hour Meter N/A Diesel Only N/A Engine – Accessories 20 Rear Run Box A/C Hour Meter N/A Diesel Only N/A Engine – Accessories 21 Rear Run Box Voltmeter J1939 N/A Diesel Only N/A Engine – Accessories 22 Rear Run Box Oil Pressure Gauge J1939 N/A Diesel Only N/A Engine – Accessories 23 Rear Run Box Coolant Gauge J1939 N/A Diesel Only N/A Engine – Accessories 24 Mechanical Gauges - Murphy Oil Pressure and Coolant Temperature N/A Diesel Only N/A Engine - Accessories 25 Adjustable brake and accelerator pedals (minimum 3 in.) N/A Diesel Only N/A Other Option - Specify N/A N/A N/A
Engine - Diagnostics
Engine – Diagnostics 1 Cummins Inline 6 Adapter Kit, Insite Basic N/A Diesel Only N/A Engine – Diagnostics 2 Cummins Quickserve Online 1 Year Subscription N/A Diesel Only N/A Engine – Diagnostics 3 Cummins Quickserve Online each Additional Year Subscription N/A Diesel Only N/A Engine – Diagnostics 4 Cummins INSITE Diagnostic Program 1 Year Subscription N/A Diesel Only N/A Engine – Diagnostics 5 Cummins INSITE Diagnostic Program each Additional Year Subscription N/A Diesel Only N/A Engine – Diagnostics 6 ISL G Fold Up Wiring Diagram N/A Diesel Only N/A Other Option - Specify N/A N/A N/A
Engine - Tune Up Kit
Engine – Tune Up Kit 1 Cummins Tune - Up Kit (Includes the Following) N/A N/A N/A Engine – Tune Up Kit 2 Includes - Pressure Gauge N/A N/A N/A Engine – Tune Up Kit 3 Includes - Torque Wrench N/A N/A N/A Engine – Tune Up Kit 4 Includes - Oil Filter Wrench N/A N/A N/A Engine – Tune Up Kit 5 Includes - Engine Coolant & Fuel Wrench N/A N/A N/A Engine – Tune Up Kit 6 Includes - Belt Tension Gauge N/A N/A N/A Engine – Tune Up Kit 7 Includes - Belt Tension Gauge N/A N/A N/A Engine – Tune Up Kit 8 Includes - Charge- A/C CAC Pressure Kit N/A N/A N/A Engine – Tune Up Kit 9 Includes - Engine Barring Gear N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Engine – Tune Up Kit 10 Includes - Torque Wrench N/A N/A N/A Engine – Tune Up Kit 11 Includes - Roller Follower Rem. & Installation Tool N/A N/A N/A Engine – Tune Up Kit 12 Includes - Compucheck Fitting N/A N/A N/A Other Option - Specify N/A N/A N/A
Flare Box
Fare Box 1 No Fare box, Power Circuit and Ground strap only N/A N/A N/A Fare Box 2 GFI 36" Fastfare N/A N/A N/A Fare Box 3 GFI 36" Odyssey N/A N/A N/A Fare Box 4 GFI 41" Fast Fare N/A N/A N/A Fare Box 5 GFI 41" Odyssey N/A N/A N/A Fare Box 6 Diamond Model H w/Two (2) Vaults N/A N/A N/A Fare Box 7 Diamond Model SV w/Two (2) Vaults N/A N/A N/A Fare Box 8 Main T1 Fare box w/Two V1 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 9 Main M 4 Fare box w/Two V4 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 10 Main SL 5 Fare box w/Two V5 Vaults in Standard Paint Colors N/A N/A N/A Fare Box 11 Cubic Fare box N/A N/A N/A Fare Box 12 Denominator Manual Passenger Counter N/A N/A N/A Fare Box 14 Globe Transfer Cutter N/A N/A N/A Other Option - Specify N/A N/A N/A
HVAC
HVAC 1 Thermo King System (Per Technical Specification) N/A N/A N/A HVAC 2 TK Intelligaire 3 W/X 616 Compressor, R134A, Reliance Brushless Cond. & Evap.

Motors N/A N/A N/A
HVAC 3 TK System w/General Electric Field Wound Motors (Cond & Evap) N/A N/A N/A HVAC 4 TK System w/General Electric P.M. Motors N/A N/A N/A HVAC 5 TK System w/X430Compressor N/A N/A N/A HVAC 6 TK System w/S391 Screw Compressor N/A N/A N/A HVAC 7 TK System w/S616 Screw Compressor N/A N/A N/A HVAC 8 TK Electric HVAC System N/A N/A N/A HVAC 9 TK Pressure and Return Gauges Mounted to Unit N/A N/A N/A HVAC 10 R407c Refrigerant N/A N/A N/A HVAC 11 MCC Drivers Heater W/Brushless Motors N/A N/A N/A HVAC 12 MCC Drivers Heater W/Brush Motors N/A N/A N/A HVAC 13 MCC Front Stepwell/Threshold Heater W/Brushless Motor (Each) N/A N/A N/A HVAC 14 MCC Underseat/Rear Stepwell Heater W/Brushless Motor (Each) N/A N/A N/A HVAC 15 MCC Underseat/Rear Stepwell Heater W/Brush Motor (Each) N/A N/A N/A HVAC 16 Sutrak All Electric Air Conditioning - Roof Mount N/A N/A N/A HVAC 17 Sutrak All Electric Air Conditioning - Rear Mount N/A N/A N/A HVAC 18 ACT Convection Heater N/A N/A N/A HVAC 19 ACT Espar Fuel-Fired Supplemental Coolant Heater N/A N/A N/A HVAC 20 Warm Welcome Mat (Rear Door) N/A N/A N/A HVAC 21 Warm Welcome Mat (Installed on W/C Ramp) N/A N/A N/A HVAC 22 Eberspacher AC 136 G3 AE N/A N/A N/A HVAC 23 Air Purification System N/A N/A N/A Other Option - Specify N/A N/A N/A
HVAC Special Purpose
HVAC Special Purpose 1 TK Intelligaire - Diagnostics N/A N/A N/A HVAC Special Purpose 2 Carrier Micromax ATE Diagnostics N/A N/A N/A HVAC Special Purpose 3 Webasto Diagnostic Tool N/A N/A N/A HVAC Special Purpose 4 Van Steenburgh Regional Recovery System (JV90- 1) N/A N/A N/A HVAC Special Purpose 5 Eberspacher diagnostics N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify N/A N/A N/A
Manuals
Manuals 1 Drivers Handbook (1 Manual/1 CD per Bus Order) N/A N/A N/A Manuals 2 Service Manual (1 Manual/1 CD per Bus Order N/A N/A N/A Manuals 3 Parts Manual (1 Manual/1CD per Bus Order) N/A N/A N/A Manuals 4 Electrical Schematics (1 Manual/1CD per Bus Order) N/A N/A N/A Manuals 5 Vendor Manuals (1 Manual/1 CD per Bus Order) N/A N/A N/A Manuals 6 Additional Driver's Handbook N/A N/A N/A Manuals 8 Additional Parts Manuals N/A N/A N/A Manuals 9 Additional Electrical Schematics N/A N/A N/A Manuals 10 Additional Electrical Multiplex N/A N/A N/A Manuals 11 Additional Cummins ISL Manuals (4 Books) N/A N/A N/A Manuals 12 Additional Allison B400 Manuals (6 Books) N/A N/A N/A Manuals 13 Additional ZF 6hp594 Manuals (5 Books) N/A N/A N/A Manuals 14 Additional Voith Manuals (7 Books) N/A N/A N/A Manuals 15 Additional Amerex Manuals N/A N/A N/A Manuals 16 Additional TRW Steering Gear Manuals N/A N/A N/A Manuals 17 Additional Thermo King Manual N/A N/A N/A Manuals 18 Additional Carrier HVAC Manuals (2 Books) N/A N/A N/A Other Option - Specify N/A N/A N/A
Safety
Safety 2 Amerex V-25lb ABC System N/A N/A N/A Safety 3 Amerex VH-25lb ABC Cylinder N/A N/A N/A Safety 4 Amerex V-30lb ABC Cylinder N/A N/A N/A Safety 5 Amerex Fire Suppression System w/Automatic Shutdown, Programmable Heat Detectors (PHDs) and Automatic Maintenance Testing (AMT) N/A N/A N/A Safety 6 Amerex Safety Net 2-Zone Fire Detection/Suppression System N/A N/A N/A Safety 7 Jomar Firestick Liquid N/A N/A N/A Safety 8 Kidde - Dual Spectrum N/A N/A N/A Safety 9 Kidde - Ltd Spectrum N/A N/A N/A Safety 10 Kidde TLSE Spectrum N/A N/A N/A Safety 11 Fogmaker Fire Suppression System (water mist) N/A N/A N/A Safety 14 Firetrace Automatic Fire Detection/Suppression System (gas detection base system) N/A N/A N/A Safety 15 Remove Amerex N/A N/A N/A Safety 16 Fire Extinguisher and Safety Triangle Kit N/A N/A N/A Safety 17 Twenty - Four Unit First Aid Kit N/A N/A N/A Safety 18 Ten Unit First Aid Kit N/A N/A N/A Safety 19 Blood Borne Pathogens Kit N/A N/A N/A Safety 20 Bio - Hazard Disposal Kit N/A N/A N/A Safety 21 High Temperature Protective Sleeves for Component Lines N/A N/A N/A Safety 22 (3) 20 - Minute Road Flares N/A N/A N/A Safety 23 Wheel Chocks (Per Set) N/A N/A N/A Safety 24 Electric - Standard no fire suppression N/A N/A N/A Other Option - Specify N/A N/A N/A
Steering
Steering 1 Ross Model TS 65 N/A N/A N/A Steering 2 Sheppard Model M110 N/A N/A N/A Steering 3 TRW Electric Assisted Steering N/A N/A N/A Steering 4 TRW TAS6505 N/A N/A N/A Steering 5 Standard Size Padded Steering Wheel N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Steering 6 Douglas Autotech 'Double-Knuckle' Steering Column (PN 9003148-C) N/A N/A N/A Other Option - Specify N/A N/A N/A
Towing & Hoisting
Towing & Hoisting 1 Set Towing Adapters/Tow Bar N/A N/A N/A Towing & Hoisting 2 Set of Hoist Adapters (Includes the 4 Following Items) N/A N/A N/A Towing & Hoisting 3 Incl w/set - Front Saddle N/A N/A N/A Towing & Hoisting 4 Incl w/set - Front Adapters N/A N/A N/A Towing & Hoisting 5 Incl w/set - Rear Saddle N/A N/A N/A Towing & Hoisting 6 Incl w/set - Rear Adapters N/A N/A N/A Towing & Hoisting 7 Front towing point N/A N/A N/A Towing & Hoisting 8 Rear towing point N/A N/A N/A Other Option - Specify N/A N/A N/A
Training
Training 1 none N/A N/A N/A Training 2 Operator Orientation - 4 Hours, (Procuring Agency) N/A N/A N/A Training 3 Operator Orientation - 8 Hours, (Procuring Agency) N/A N/A N/A Training 4 Operator Orientation - Additional hours of training, per hour N/A N/A N/A Training 5 Maintenance Orientation - 4 Hours, (Procuring Agency) N/A N/A N/A Training 6 Maintenance Orientation - 24 Hours, (Procuring Agency) N/A N/A N/A Training 7 Maintenance Orientation - 32 Hours, (Procuring Agency) N/A N/A N/A Training 8 Maintenance Orientation - Additional hours of training, per hour N/A N/A N/A Training 9 Technical Training - 96 Hours, (Procuring Agency) Price Proposal Form N/A N/A N/A Training 10 Technical Training - Additional hours of training, per hour N/A N/A N/A Training 11 OEM Training - Two Slots for "Train the Trainers" Technical Instruction N/A N/A N/A Training 12 OEM Training - Additional Slots for "Train the Trainers" Technical Instruction N/A N/A N/A Training 13 Body, Chassis, Suspension and Steering - (8 Hour Class), Procuring Agency N/A N/A N/A Training 14 Body, Chassis, Suspension and Steering - (24 Hour Class), Procuring Agency N/A N/A N/A Training 15 Body, Chassis, Suspension and Steering - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 16 Electrical and Electronics - (8 Hour Class), Procuring Agency N/A N/A N/A Training 17 Electrical and Electronics - (24 Hour Class), Procuring Agency N/A N/A N/A Training 18 Electrical and Electronics - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 19 Air and Brake Systems - (24 Hour Class), Procuring Agency N/A N/A N/A Training 20 Air and Brake Systems - (8 Hour Class), Procuring Agency N/A N/A N/A Training 21 Air and Brake Systems - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 22 HVAC and Climate Controls - (4 Hour Class), Procuring Agency N/A N/A N/A Training 23 HVAC and Climate Controls - (8 Hour Class), Procuring Agency N/A N/A N/A Training 24 HVAC and Climate Controls - Additional hours of training per hour, Procuring Agency N/A N/A N/A Training 25 Engine - (8 Hour Class), per Student at Procuring Agency N/A N/A N/A Training 26 Engine - (24 Hour Class), per Student at Procuring Agency N/A N/A N/A Training 27 Engine - additional hour of training per hour, per Student at Procuring Agency N/A N/A N/A Training 28 Transmission - (8 Hour Class), per Student, at Procuring Agency N/A N/A N/A Training 29 Transmission - (24 Hour Class), per Student, at Procuring Agency N/A N/A N/A Training 30 Transmission - Additional hour of training per hour, per Student, at Procuring Agency N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training 31 Wheelchair Ramp - (2 Hour Class), at Procuring Agency N/A N/A N/A Training 32 Wheelchair Ramp - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 33 Wheelchair Ramp - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 34 Destination Sign - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 35 Destination Sign - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 36 Destination Sign - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 38 Axles and Tires - Procuring Agency. Included in Body/Chassis N/A N/A N/A Training 39 Fire Suppression - (4 Hour Class), at Procuring Agency N/A N/A N/A Training 40 Fire Suppression - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 41 Fire Suppression - Additional hour of training per hour, at Procuring Agency N/A N/A N/A Training 42 Engine OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 43 Engine OEM Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 44 Engine OEM Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 45 Transmission Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 46 Transmission Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 47 Transmission Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 48 Data Communications System OEM Training (4 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 49 Data Communications System OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 50 Data Communications System OEM Training (Additional hour of training per hour, 2 Persons), at Local Dealer N/A N/A N/A Training 51 Hybrid Drive - (8 Hour Class), at Procuring Agency N/A N/A N/A Training 52 Hybrid Drive - (24 Hour Class), at Procuring Agency N/A N/A N/A Training 53 Hybrid Drive - (Additional hour of training per hour), at Procuring Agency N/A N/A N/A Training 54 Hybrid Drive OEM Training (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 55 Hybrid Drive OEM Training (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 56 Hybrid Drive OEM Training (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 57 Hybrid Transmission Training - (8 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 58 Hybrid Transmission Training - (24 Hour Class, Per Person), at Local Dealer N/A N/A N/A Training 59 Hybrid Transmission Training - (Additional hour of training per hour, Per Person), at Local Dealer N/A N/A N/A Training 60 Additional training … N/A N/A N/A
Other Option - Specify N/A N/A N/A
Training Equipment
Modules
Training Equipment
Modules 1 Fare Collection OEM Training (2 Persons), At Local Dealer N/A N/A N/A Training Equipment
Modules 2 ISL/Voith D864.5 N/A N/A N/A
Training Equipment
Modules 3 ISL/ZF 6AP1400B N/A N/A N/A
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Training Equipment
Modules 4 ISL/ZF HP594 N/A N/A N/A
Training Equipment
Modules 5 ISX 12 G N/A N/A N/A
Training Equipment
Modules 6 ISL G N/A N/A N/A
Training Equipment
Modules 7 HVAC Training Module N/A N/A N/A
Training Equipment
Modules 8 I/O Controls Multiplex Board N/A N/A N/A
Training Equipment
Modules 9 Air Brake Training Board N/A N/A N/A
Training Equipment
Modules 10 ISB 6.7 N/A N/A N/A
Training Equipment
Modules 11 ISL/B400R Power Plant N/A N/A N/A
Other Option - Specify N/A N/A N/A
Transmission
Transmission 1 Allison B- 400R, GEN IV N/A N/A N/A Transmission 2 Allison B- 500R, GEN IV N/A N/A N/A Transmission 3 Allison B- 500, GEN V N/A N/A N/A Transmission 4 Allison B- 500R, GEN V N/A N/A N/A Transmission 5 Voith D854.6 N/A N/A N/A Transmission 6 ZF 6AP1400B N/A N/A N/A Transmission 7 ZF 6HP594 N/A N/A N/A Transmission 8 "Transynd" Synthetic N/A N/A N/A Transmission 9 Titan Probalizer OD- 1014 N/A N/A N/A Transmission 10 Davco Electronic Fluid Level Gauge N/A N/A N/A Transmission 11 Keyed Transmission Lockout Switch on Dash N/A N/A N/A Transmission 12 Transmission Oil Temperature Gauge (Dash and Rear Run Box) N/A N/A N/A Transmission 13 Electric Transmission - 2 speed N/A N/A N/A Transmission 14 Electric Transmission - 4 speed N/A N/A N/A Other Option - Specify N/A N/A N/A
Transmission
Diagnostics
Transmission Diagnostics 1 Allison Cable & Software N/A N/A N/A Transmission Diagnostics 2 Voith Cable & Software N/A N/A N/A Transmission Diagnostics 3 Voith Service Tool Kit N/A N/A N/A Transmission Diagnostics 4 Set of ZF Diagnostics (Includes the 3 Following Items) N/A N/A N/A Transmission Diagnostics 5 Includes - Testman Diagnostic System N/A N/A N/A Transmission Diagnostics 6 Includes - SAE Cable N/A N/A N/A Transmission Diagnostics 7 Includes - Ecomat Testman Software N/A N/A N/A Other Option - Specify N/A N/A N/A
W/C Restraints
W/C Restraints 1 AMSECO - A.R.M. N/A N/A N/A W/C Restraints 2 AMSECO Reliant Mobility Aid Securement System N/A N/A N/A W/C Restraints 3 AMESCO Passive rear-facing restraints (rear facing barriers) N/A N/A N/A W/C Restraints 4 USSC - First N/A N/A N/A W/C Restraints 5 Freedman - First N/A N/A N/A W/C Restraints 6 Q'Straint - QRT N/A N/A N/A W/C Restraints 7 Q'Straint - ORT 360 N/A N/A N/A W/C Restraints 8 Q'Straint - Q'UBE 3- Point Securement Station N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 W/C Restraints 9 Q'Straint - Quantum Securement System N/A N/A N/A W/C Restraints 10 Q'Strant/Sure-Lok - OMNI Floor Anchor System N/A N/A N/A W/C Restraints 11 Q’Straint Slide N Click floor mount restraint system N/A N/A N/A W/C Restraints 12 Q- Pod W/C Restraint System N/A N/A N/A W/C Restraints 13 AMESCO Dual Auto Lock W/C Restraint System N/A N/A N/A W/C Restraints 14 USSC - V- PRO N/A N/A N/A W/C Restraints 15 Sure LOK - RTT Electric N/A N/A N/A W/C Restraints 16 Sure LOK - RTT Manual N/A N/A N/A W/C Restraints 17 Additional L-track per/foot N/A N/A N/A W/C Restraints 18 RESNA WC18 compliant restraint N/A N/A N/A W/C Restraints 19 RESNA WC19 compliant restraint N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel Chair Ramp
(low-floor only) / Lift
(high-floor only)
Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
1 Lift- U Model LU11, 1:6 Ratio, Front Door only N/A N/A N/A Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
2 LIFT- U Model LU18, Dual- Mode 1:6 (Street)/1:8 (Sidewalk) N/A N/A N/A Wheel Chair Ramp (lowfloor only) / Lift (high-floor
only)
3 Ricon 6:1 SA Self-Leveling Ramp N/A N/A N/A

N/A N/A N/A
Wheel - Brakes
Wheel – Brakes 1 S - Cam Drum w/Wabsco ABS System - (DEDUCT) N/A N/A N/A Wheel – Brakes 2 Front Wheel Drum Brakes - (DEDUCT) N/A N/A N/A Wheel – Brakes 3 Rear Wheel Drum Brakes - (DEDUCT) N/A N/A N/A Wheel – Brakes All Wheel Drum Brakes N/A N/A N/A Wheel – Brakes 4 MGM “E-Stroke” Electronic Brake Monitoring System – Disc Brakes N/A N/A N/A Wheel – Brakes 5 MGM “E-Stroke” Electronic Brake monitoring System – Drum Brakes N/A N/A N/A Wheel – Brakes 6 All Wheel Disc Brakes N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel - Hubometer
Wheel Hubometer 1 none N/A N/A N/A Wheel Hubometer 2 Veeder Root w/o Tenths w/o Guard N/A N/A N/A Wheel Hubometer 3 S&A Fleetwatch 392 Electronic N/A N/A N/A Wheel Hubometer 4 E J Ward Data System (Includes Receiver, Display Unit and Antenna) N/A N/A N/A Wheel Hubometer 5 Engler (Stemco) Mechanical W/o Tenths W/o Guard N/A N/A N/A Wheel Hubometer 6 Engler Hubometer W/Powder Coat Guard N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheel - Hubs
Wheel Hubs 1 Hub Piloted Wheels and Axles W/Grease Seals N/A N/A N/A Wheel Hubs 2 Hub Piloted w/Oil Seals (per Axle) N/A N/A N/A Wheel Hubs 3 Stud Piloted Wheels and Axles w/Grease Seals N/A N/A N/A Wheel Hubs 4 Stud Piloted Wheels and Axles w/Oil Seals N/A N/A N/A Wheel Hubs 5 Wabco Traction Control N/A N/A N/A Wheel Hubs 6 Hydraulic drop down snow chain system N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Option - Specify N/A N/A N/A
Wheel - Tires
Wheel – Tires 1 Customer Supplied N/A N/A N/A Wheel – Tires 2 Michelin XZU2 (305/85R/22.5) N/A N/A N/A Wheel – Tires 3 Michelin XZU2 (305/70R/22.5) N/A N/A N/A Wheel – Tires 4 Michelin X incity Z (305/70R/22.5) N/A N/A N/A Wheel – Tires 5 Michelin XZU3 (305/85/22.5) N/A N/A N/A Wheel – Tires 6 Michelin XZU2 (275/70R/22.5) N/A N/A N/A Wheel – Tires 7 Michelin XZE2+(H) (295/80/R22.5) N/A N/A N/A Wheel – Tires 8 G152 (305/85R/22.5) N/A N/A N/A Wheel – Tires 9 Goodyear G152 (305/70R/22.5) N/A N/A N/A Wheel – Tires 10 Goodyear G152 (275/70R/22.5) N/A N/A N/A Wheel – Tires 11 Firestone 18J (315/80R/22.5) N/A N/A N/A Wheel – Tires 12 Firestone 16H (305/70R/22.5) N/A N/A N/A Wheel – Tires 13 Bridgestone 16H (275/70R/22.5) N/A N/A N/A Wheel – Tires 14 Tire Pressure Monitoring System N/A N/A N/A Other Option - Specify N/A N/A N/A
Wheels
Wheels 1 (7) Powder Coated Steel Wheels (White and Black) N/A N/A N/A Wheels 2 (7) Aluminum Alcoa - Full Polish N/A N/A N/A Wheels 3 (7) Aluminum Alcoa - Full Polish W/Dura Bright Finish N/A N/A N/A Wheels 4 (7) Aluminum Alcoa - Machine Finish N/A N/A N/A Wheels 5 (7) Aluminum Alcoa - Machine Finish W/Dura Bright Finish N/A N/A N/A Wheels 6 Remove Spare Wheel N/A N/A N/A Wheels 7 Add Dura Flange to Alcoa N/A N/A N/A Other Option - Specify N/A N/A N/A
Windows
Windows 2 Laminated Safety Glass (1/4") - Framed Sliders N/A N/A N/A Windows 3 Laminated Safety Glass (1/4") - Framed Fixed N/A N/A N/A Windows 4 Laminated Safety Glass (1/4") - Framed Transom - openable N/A N/A N/A Windows 5 Hidden Framed Bonded - Fixed N/A N/A N/A Windows 6 Hidden Framed Bonded - Transom -openable N/A N/A N/A Windows 7 Add Window Guards (Acrylic Liner and Film) N/A N/A N/A Windows 8 anti-graffiti 3M film (per inside window) N/A N/A N/A Windows 9 Stormite flush-mount serviceable w/tip N/A N/A N/A Windows 10 All windows equipped with liners attached N/A N/A N/A Other Option - Specify N/A N/A N/A
Other Items
Other Items 1 Brake System Diagnostics N/A N/A N/A Other Items 2 Meritor Software (Tool Box), Serial Link/Interface Kit N/A N/A N/A Other Items 3 Engine Dolly N/A N/A N/A Other Items 4 Phillips Thermo Block Heater N/A N/A N/A Other Items 5 Engine Skid Protection N/A N/A N/A Other Items 6 Mobile Receiver for S&A 392 Hubometer N/A N/A N/A Other Items 7 Floor Mounted 4 -Way Flasher Switch N/A N/A N/A Other Items 8 Cup Holder N/A N/A N/A Other Items 9 Auxiliary Drivers Fan N/A N/A N/A Other Items 10 Stainless Steel Trash Bag Holder N/A N/A N/A Other Items 11 Transfer Cutter N/A N/A N/A Other Items 12 Keyed Ignition Switch N/A N/A N/A Other Items 13 Fiber Optic Backlighting on Drivers Dash N/A N/A N/A Other Items 14 Exterior Ad Frame - Front 21" X 40" N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Other Items 15 Exterior Ad Frame - Curbside 30" X 88" N/A N/A N/A Other Items 16 Exterior Ad Frame -Streetside 30" X 144" N/A N/A N/A Other Items 17 Exterior Ad Frame Rear 21" X 72" N/A N/A N/A Other Items 18 I/O Controls LED Interior Lights N/A N/A N/A Other Items 19 Pretoria LED Interior Lights N/A N/A N/A Other Items 20 See II Transit Airfoil N/A N/A N/A Other Items 21 Open Bottom Racks N/A N/A N/A Other Items 22 Suburban Package Racks/Open Bottom N/A N/A N/A Other Items 23 Twin Automatic Greasing System N/A N/A N/A Other Items 24 EMCO -Wheaton Posi -Lock Nozzle N/A N/A N/A Other Items 25 Hybrid Drive Tools N/A N/A N/A Other Items 26 Special Purpose Hybrid Drive Tool Kit N/A N/A N/A Other Items 27 BAE (APS2) beltless power pack N/A N/A N/A Other Items 28 WABCO E-COMP N/A N/A N/A Other Items 29 ISB 6.7 Fold Up Wiring Diagram (hybrid option) N/A N/A N/A Other Items 30 Allison Hybrid Manuals N/A N/A N/A Other Items 31 BAE Hybrid Manuals N/A N/A N/A Other Items 32 Allison Mid-Life Overhaul Parts List and Cost N/A N/A N/A Other Items 33 BAE Mid-Life Overhaul Part List and Cost N/A N/A N/A Other Items 34 winter weather package (heated front entrance) N/A N/A N/A Other Items 35 First Aid kit for 24 people option N/A N/A N/A Other Items 36 2 front dash-mounted fans to defrost front door N/A N/A N/A Other Items 37 driver’s LED reading light N/A N/A N/A Other Items 38 driver’s sun visors N/A N/A N/A Other Items 39 driver’s foot controls- adjustable Kongsberg system N/A N/A N/A Other Items 40 Stainless Steel molding to cover edges on entrance and rear rise on passenger assist N/A N/A N/A
Other Items 41 Separate control for non-synchronized wipers N/A N/A N/A DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Warranties Designation Description (what is covered) Years Miles Source Price:

Complete Bus Option
Full coach warranty includes and applies to electrical, doors, seats, flooring,roof hatches, destination signs, wheel chair ramp, hand rails, P.A., etc , but does not include ITS or special options. 2 100,000 GILLIG Included
Body Structure Standard Applies to structural members in the body and undercarriage including the structural members in the suspensions. 3 150,000 GILLIG Included Corrosion & Structural Integrtiy Option
Covers against a significant loss of structural integrity of the assembly or it's functional performance, resulting from pertinent loss of cross-section due to corrosion caused by normal environmental elements but excludes corrosion caused by aggressive road de-icers such as Magnesium Choloride or equivalents, unless GILLIG approved preventative measures are taken (see service manual).
12 500,000 GILLIG Included
Propulsion System (Diesel, CNG, Hybrid) Standard See Cummins Parchment 2 Unlimited Cummins Included Propulsion System (Electric) Standard See Cummins Parchment 3 100,000 Cummins Included Transmission (Allison) Option See Allison Parchment 5 300,000 Allison Included Energy Storage System Standard See Cummins Parchment 6 300,000 Cummins Included Emission Control System Standard See Cummins Parchment 5 100,000 Cummins Included Subsystems:

Brake Standard Excludes Friction Material 2 100,000 Meritor Included Desitination Signs Standard See Twin Vision/Luminator Parchment 6 Unlimited Twin Vision/Luminator Included Heating, Ventilation Option No consumables 2 100,000 Mobile Climate Control Included Air Conditioning Unit and Compressor Option See Thermo King Parchment 3 Unlimited Thermo King Included Door systems Option Vapor 2 Unlimited Vapor/GILLIG Included air compressor Standard See Cummins Parchment 2 Unlimited Cummins Included air dryer Option No consumables 2 100,000 GILLIG Included Wheelchair lift and ramp system Standard See Lift-U Parchment 2 Unlimited Lift-U Included Starter. Standard mechanical only. 3 350,000 Delco Included Alternator S Standard Alternator only. Does not include the drive system. 2 Unlimited Niehoff Included Charge air cooler Standard Charge air cooler including core, tanks and including related surrounding framework and fittings. 3 Unlimited Modine Included Fire suppression Standard Fire suppression system including tank and extinguishing agent dispensing system 3 Unlimited Amerex Included Hydraulic systems Standard Including hydraulic pump & power steering as applicable. 2 Unlimited GILLIG Included Propulsion cooling systems Standard Radiator including core, tanks and related framework, including surge tank. Transmission cooler. 3 Unlimited Modine Included Power electronics NA DC/DC converters, inverters, if supplied NA NA NA NA Passenger seating Standard excluding upholstery. 5 Unlimited AMSECO Included Fuel storage and delivery system Standard See AGILITY CNG Parchment 3 150,000 Agility Included

WARRANTIES
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 34
Exhibit C
Insurance Requirements

1. INSURANCE OBLIGATION. During the Term of this Master Contract, Contractor shall possess and maintain in full force and effect, at Contractor’s sole expense, the following insurance coverages:
a. COMMERCIAL GENERAL LIABILITY INSURANCE. Commercial general liability insurance (and, if necessary, commercial umbrella liability insurance) covering bodily injury and property damage, personal injury, and advertising injury liability on an ‘occurrence form’ that shall be no less comprehensive and no more restrictive than the coverage provided by Insurance Services Office (ISO) under the most recent version of form CG 00 01 in the amount of not less than $2,000,000 per occurrence and $4,000,000 general aggregate.

This coverage shall include blanket contractual liability coverage. This coverage shall include a cross-liability clause or separation of insured condition. b. WORKERS’ COMPENSATION INSURANCE & EMPLOYER’S LIABILITY (STOP GAP). Contractor shall comply with applicable Workers’ Compensation or Industrial Accident insurance providing benefits to statutory limits, including Employer’s or Stop-Gap Liability with a minimum limit of $1,000,000 per accident/bodily injury by disease; $1,000,000 policy limit/Bodily injury by disease; and $1,000,000 each employee. c. PRODUCTS-COMPLETED OPERATIONS LIABILITY INSURANCE. Products-completed operations liability insurance in the amount of not less than $2,000,000 combined single limit per occurrence, $4,000,000 general annual aggregate for a period of five (5) years after acceptance of the last bus delivered under this Contract. Products Liability coverage may be effected through one or more excess liability policies. d. COMMERCIAL AUTOMOBILE LIABILITY INSURANCE. ‘Symbol 1’ Commercial Automobile Liability coverage (and, if necessary, commercial umbrella liability insurance) including coverage for all owned, hired, and non-owned vehicles. The combined single limit per accident shall not be less than $2,000,000.
e. PROFESSIONAL LIABILITY (ERRORS & OMISSIONS) INSURANCE. Professional liability insurance in the amount of not less than $2,000,000 combined single limit per occurrence, $4,000,000 general annual aggregate.
f. UMBRELLA INSURANCE. Umbrella coverage in the sum of $__________ shall be provided and shall apply over all liability policies, without exception, including but not limited to Commercial General Liability, Employers’ Liability, Products-Completed Operations Liability, Automobile Liability, and Professional Liability.

Claims Made Policies (applicable only to professional liability). If any of the required policies provide claims-made coverage:

1. The Retroactive Date must be shown, and must be before the date of the contract or the beginning of contract work

2. Insurance must be maintained and evidence of insurance must be provided for at least five (5) years after completion of the contract work.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 35

3. If coverage is canceled or non-renewed, and not replaced with another claims-made policy form with a Retroactive Date prior to the contract effective date, the Contractor must purchase “extended reporting” coverage for a minimum of five (5) years after completion of work.

The insurance coverage limits set forth herein are the minimum. Contractor’s insurance coverage shall be no less than the minimum amounts specified. Coverage in the amounts of these minimum limits, however, shall not be construed to relieve Contractor from liability in excess of such limits. Contractor waives all rights against the State of Washington for the recovery of damages to the extent such damages are covered by any insurance required herein.

2. INSURANCE CARRIER RATING. Coverages provided by the Contractor must be underwritten by an insurance company deemed acceptable to the State of Washington’s Office of Risk Management.

Insurance coverage shall be provided by companies authorized to do business within the State of Washington and rated A- Class VII or better in the most recently published edition of Best’s Insurance Rating. Enterprise Services reserves the right to reject all or any insurance carrier(s) with an unacceptable financial rating.

3. ADDITIONAL INSURED. Except for Workers’ Compensation, Commercial Automobile Liability, and Professional Liability (Errors and Omissions), all required insurance shall include the State of Washington (and its agents, officers, and employees) and the applicable Participant as an Additional Insureds evidenced by copy of the Additional Insured Endorsement attached to the Certificate of Insurance on such insurance policies.

4. CERTIFICATE OF INSURANCE. Prior to execution of the Master Contract, Contractor shall furnish to Enterprise Services, as evidence of the insurance coverage required by this Master Contract, a certificate of insurance satisfactory to Enterprise Services that insurance, in the above-stated kinds and minimum amounts, has been secured. In addition, no less than ten (10) days prior to coverage expiration, Contractor shall furnish to Enterprise Services an updated or renewed certificate of insurance, satisfactory to Enterprise Services, that insurance, in the above-stated kinds and minimum amounts, has been secured. Failure to maintain or provide proof of insurance, as required, will result in contract cancellation. All policies and certificates of insurance shall include the Master Contract number stated on the cover of this Master Contract.

5. PRIMARY COVERAGE. Contractor’s insurance shall apply as primary and shall not seek contribution from any insurance or self-insurance maintained by, or provided to, the additional insureds listed above including, at a minimum, the State of Washington and/or any Participant. All insurance or self-insurance of the State of Washington and/or Participants shall be excess of any insurance provided by Contractor or subcontractors.

6. SUBCONTRACTORS. Contractor shall include all subcontractors as insureds under all required insurance policies. Alternatively, prior to utilizing any subcontractor, Contractor shall cause any such subcontractor to provide insurance that complies will all applicable requirements of the insurance set forth herein and shall furnish separate Certificates of Insurance and endorsements for each subcontractor. Each subcontractor must comply fully with all insurance requirements stated herein. Failure of any subcontractor to comply with insurance requirements does not limit Contractor’s liability or responsibility.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 36

7. WAIVER OF SUBROGATION. Contractor waives all rights of subrogation against the State of Washington and any Participant for the recovery of damages to the extent such damages are or would be covered by the insurance specified herein.

8. NOTICE OF CHANGE OR CANCELLATION. There shall be no cancellation, material change, exhaustion of aggregate limits, or intent not to renew insurance coverage, either in whole or in part, without at least sixty (60) days prior written Legal Notice by Contractor to Enterprise Services. Failure to provide such notice, as required, shall constitute default by Contractor. Any such written notice shall include the Master Contract number stated on the cover of this Master Contract.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 37
Exhibit D
Federal Transit Administration Clauses

1.1. NO FEDERAL GOVERNMENT OBLIGATIONS TO THIRD PARTIES. (a) Participant and Contractor acknowledge and agree that, notwithstanding any concurrence by the Federal Government in or approval of the solicitation or award of the underlying Contract, absent the express written consent by the Federal Government, the Federal Government is not a party to this Contract and shall not be subject to any obligations or liabilities to the Participant, Contractor, or any other party (whether or not a party to that contract) pertaining to any matter resulting from the underlying Contract. (b) Contractor agrees to include the above clause in each subcontract financed in whole or in part with Federal assistance provided by FTA. It is further agreed that the clause shall not be modified, except to identify the subcontractor who will be subject to its provisions.

1.2. FALSE STATEMENTS OR CLAIMS CIVIL AND CRIMINAL FRAUD. (a) Contractor acknowledges that the provisions of the Program Fraud Civil Remedies Act of 1986, as amended, 31 U.S.C. § 3801 et seq. and U.S. DOT regulations, "Program Fraud Civil Remedies," 49 C.F.R. Part 31, apply to its actions pertaining to this Project. Upon execution of the underlying contract, Contractor certifies or affirms the truthfulness and accuracy of any statement it has made, it makes, it may make, or causes to be made, pertaining to the underlying contract or the FTA assisted project for which this contract work is being performed. In addition to other penalties that may be applicable, Contractor further acknowledges that if it makes, or causes to be made, a false, fictitious, or fraudulent claim, statement, submission, or certification, the Federal Government reserves the right to impose the penalties of the Program Fraud Civil Remedies Act of 1986 on Contractor to the extent the Federal Government deems appropriate.
(b) Contractor also acknowledges that if it makes, or causes to be made, a false, fictitious, or fraudulent claim, statement, submission, or certification to the Federal Government under a contract connected with a project that is financed in whole or in part with Federal assistance originally awarded by FTA under the authority of 49 U.S.C. § 5307, the Government reserves the right to impose the penalties of 18 U.S.C. § 1001 and 49 U.S.C. § 5307(n)(1) on Contractor, to the extent the Federal Government deems appropriate. (c) Contractor agrees to include the above two clauses in each subcontract financed in whole or in part with Federal assistance provided by FTA. It is further agreed that the clauses shall not be modified, except to identify the subcontractor who will be subject to the provisions.

1.3. ACCESS TO THIRD PARTY CONTRACT RECORDS.
(a) Where the Participant is not a State but a local government and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 C.F.R. 18.36(i), the Contractor agrees to provide the Participant, the FTA Administrator, the Comptroller General of the United States or any of their authorized representatives access to any books, documents, papers and records of the Contractor which are directly pertinent to this contract for the purposes of making audits, examinations, excerpts and transcriptions.

Contractor also agrees, pursuant to 49 C.F.R. 633.17 to provide the FTA Administrator or his DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 38
authorized representatives including any PMO Contractor access to Contractor's records and construction sites pertaining to a major capital project, defined at 49 U.S.C. 5302(a)1, which is receiving federal financial assistance through the programs described at 49 U.S.C. 5307, 5309 or 5311.
(b) Where the Participant is a State and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 C.F.R. 633.17, Contractor agrees to provide the Participant, the FTA Administrator or his authorized representatives, including any PMO Contractor, access to the Contractor's records and construction sites pertaining to a major capital project, defined at 49 U.S.C. 5302(a)1, which is receiving federal financial assistance through the programs described at 49 U.S.C. 5307, 5309 or 5311. By definition, a major capital project excludes contracts of less than the simplified acquisition threshold currently set at $100,000.
(c) Where the Participant enters into a negotiated contract for other than a small purchase or under the simplified acquisition threshold and is an institution of higher education, a hospital or other non-profit organization and is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 C.F.R. 19.48, Contractor agrees to provide the Participant, FTA Administrator, the Comptroller General of the United States or any of their duly authorized representatives with access to any books, documents, papers and record of the Contractor which are directly pertinent to this contract for the purposes of making audits, examinations, excerpts and transcriptions. (d) Where any Participant which is the FTA Recipient or a subgrantee of the FTA Recipient in accordance with 49 U.S.C. 5325(a) enters into a contract for a capital project or improvement (defined at 49 U.S.C. 5302(a)1) through other than competitive bidding, the Contractor shall make available records related to the contract to the Participant, the Secretary of Transportation and the Comptroller General or any authorized officer or employee of any of them for the purposes of conducting an audit and inspection. (e) Contractor agrees to permit any of the foregoing parties to reproduce by any means whatsoever or to copy excerpts and transcriptions as reasonably needed. (f)Contractor agrees to maintain all books, records, accounts and reports required under this contract for a period of not less than three years after the date of termination or expiration of this contract, except in the event of litigation or settlement of claims arising from the performance of this contract, in which case Contractor agrees to maintain same until the Participant, the FTA Administrator, the Comptroller General, or any of their duly authorized representatives, have disposed of all such litigation, appeals, claims or exceptions related thereto. Reference 49 CFR 18.39(i)(11). (g) FTA does not require the inclusion of these requirements in subcontracts.

1.4. CHANGES TO FEDERAL REQUIREMENTS. Contractor shall at all times comply with all applicable FTA regulations, policies, procedures and directives, including without limitation those listed directly or by reference in the Master Agreement between Participant and FTA, as they may be amended or promulgated from time to time during the term of this contract. Contractor's failure to so comply shall constitute a material breach of this Contract.

1.5. TERMINATION. See Section 16 Suspension & Termination and Section 18.13 Waiver.

1.6. CIVIL RIGHTS.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 39
(a) Nondiscrimination. In accordance with Title VI of the Civil Rights Act, as amended, 42 U.S.C. § 2000d, section 303 of the Age Discrimination Act of 1975, as amended, 42 U.S.C. § 6102, section 202 of the Americans with Disabilities Act (ADA) of 1990, 42 U.S.C. § 12132, and Federal transit law at 49 U.S.C. § 5332, Contractor agrees that it will not discriminate against any employee or applicant for employment because of race, color, creed, national origin, sex, age, or disability. In addition, Contractor agrees to comply with applicable Federal implementing regulations and other implementing requirements FTA may issue. (b) Equal Employment Opportunity. The following equal employment opportunity requirements apply to the underlying contract:

1. Race, Color, Creed, National Origin, Sex. In accordance with Title VII of the Civil Rights Act, as amended, 42 U.S.C. § 2000e, and Federal transit laws at 49 U.S.C. § 5332, the Contractor agrees to comply with all applicable equal employment opportunity requirements of U.S. Department of Labor (U.S. DOL) regulations, "Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor," 41 C.F.R. Parts 60 et seq., (which implement Executive Order No. 11246, "Equal Employment Opportunity," as amended by Executive Order No. 11375, "Amending Executive Order 11246 Relating to Equal Employment Opportunity," 42 U.S.C. § 2000e note), and with any applicable Federal statutes, executive orders, regulations, and Federal policies that may in the future affect construction activities undertaken in the course of the Project. Contractor agrees to take affirmative action to ensure that applicants are employed, and that employees are treated during employment, without regard to their race, color, creed, national origin, sex, or age. Such action shall include, but not be limited to, the following: employment, upgrading, demotion or transfer, recruitment or recruitment advertising, layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. In addition, Contractor agrees to comply with any implementing requirements FTA may issue.

2. Age. In accordance with section 4 of the Age Discrimination in Employment Act of 1967, as amended, 29 U.S.C. §§ 623 and Federal transit law at 49 U.S.C. § 5332, Contractor agrees to refrain from discrimination against present and prospective employees for reason of age. In addition, Contractor agrees to comply with any implementing requirements FTA may issue.

3. Disabilities. In accordance with section 102 of the Americans with Disabilities Act, as amended, 42 U.S.C. § 12112, Contractor agrees that it will comply with the requirements of U.S. Equal Employment Opportunity Commission, "Regulations to Implement the Equal Employment Provisions of the Americans with Disabilities Act," 29 C.F.R. Part 1630, pertaining to employment of persons with disabilities. In addition, Contractor agrees to comply with any implementing requirements FTA may issue. (c) Contractor also agrees to include these requirements in each subcontract financed in whole or in part with Federal assistance provided by FTA, modified only if necessary to identify the affected parties.

1.7. DISADVANTAGED BUSINESS ENTERPRISES. The Disadvantaged Business Enterprise (DBE) requirements of 49 CFR Part 26 and USDOT’s official interpretations (i.e., Questions & Answers) apply to this Contract. As such, the requirements of this Contract are to make affirmative efforts to solicit DBEs, provide information on who submitted a Bid or quote and to report DBE participation. No DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 40
preference will be included in the evaluation of Bids/Proposals, no minimum level of DBE participation shall be required as a Condition of Award and Bids/Proposals may not be rejected or considered non-responsive on that basis.

Transit Vehicle Manufacturer Compliance with DBE Requirements. Before a transit vehicle manufacturer (TVM) may submit a bid or proposal to provide vehicles to be financed with FTA assistance, 49 C.F.R. § 26.49 requires the TVM to submit a certification that it has complied with FTA’s DBE requirements.

1.8. ADA ACCESS. Contractor shall comply with the requirements of 49 CFR FTA C 4710.1 as applicable to this Contract. Equal access and the opportunity should be given to individuals with disabilities to fully participate in or benefit from the goods, services, facilities, privileges, advantages, or accommodations.

Contractor must comply with the accessibility requirements of DOT regulations, “Transportation Services for Individuals with Disabilities (ADA),” 49 C.F.R. part 37, and Joint Access Board/DOT regulations, “Americans with Disabilities (ADA) Accessibility Specifications for Transportation Vehicles,” 36 C.F.R. part 1192 and 49 C.F.R. part 38.

1.9. INCORPORATION OF FEDERAL TRANSIT ADMINISTRATION (FTA) TERMS. The preceding provisions include, in part, certain Standard Terms and Conditions required by DOT, whether or not expressly set forth in the preceding Contract provisions. All contractual provisions required by DOT, as set forth in FTA Circular 4220.1F, are hereby incorporated by reference. Anything to the contrary herein notwithstanding, all FTA mandated terms shall be deemed to control in the event of a conflict with other provisions contained in this Agreement. Contractor shall not perform any act, fail to perform any act, or refuse to comply with any (name of grantee) requests which would cause (name of grantee) to be in violation of the FTA terms and conditions.

1.10. DEBARMENT AND SUSPENSION. This Contract is a covered transaction for purposes of 49 CFR Part 29.

As such, the contractor is required to verify that none of the contractor, its principals, as defined at 49 CFR 29.995, or affiliates, as defined at 49 CFR 29.905, are excluded or disqualified as defined at 49 CFR 29.940 and 29.945. Contractor is required to comply with 49 CFR 29, Subpart C and must include the requirement to comply with 49 CFR 29, Subpart C in any lower tier covered transaction it enters into. By signing and submitting its bid or proposal, the bidder or proposer certifies as follows:

The certification in this clause is a material representation of fact relied upon by Enterprise Services. If it is later determined that the bidder or proposer knowingly rendered an erroneous certification, in addition to remedies available to Enterprise Services, the Federal Government may pursue available remedies, including but not limited to suspension and/or debarment. The bidder or proposer agrees to comply with the requirements of 49 CFR 29, Subpart C while this offer is valid and throughout the period of any contract that may arise from this offer. The bidder or proposer further agrees to include a provision requiring such compliance in its lower tier covered transactions.

1.11. BUY AMERICA. Contractor agrees to comply with 49 U.S.C. 5323(j) and 49 C.F.R. Part 661, which provide that Federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver. General waivers are listed in 49 C.F.R. 661.7.

Separate requirements for rolling stock are set out at 49 U.S.C. 5323(j)(2)(C) and 49 C.F.R. § 661.11. Rolling stock must be assembled in the United States and have at least a 65 percent DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 41
domestic stock content for rolling stock procurements with the first vehicle scheduled for delivery in fiscal years 2018 and 2019 and at least 70 percent domestic content for rolling stock procurements with the first vehicle scheduled for delivery in 2020 or thereafter.

Contractor must submit to Participants the appropriate Buy America Certification with all offers on FTA-funded contracts, except those subject to a general waiver. Proposals that are not accompanied by a properly completed Bus America certification are subject to the provisions of 49 CFR 661.13 and will be rejected as nonresponsive.

Pursuant to Appendix A to §661.7(b), a general public interest waiver from the Buy America requirements applies to microprocessors, computers, microcomputers, or software, or other such devices, which are used solely for the purpose of processing or storing data. This general waiver does not extend to a product or device which merely contains a microprocessor or microcomputer and is not used solely for the purpose of processing or storing data.

1.12. RESOLUTION OF DISPUTES, BREACHES, OR OTHER LITIGATION. See Section 15.

1.13. LOBBYING. Byrd Anti-Lobbying Amendment, 31 U.S.C. 1352, as amended by the Lobbying Disclosure Act of 1995, P.L. 104-65 [to be codified at 2 U.S.C. § 1601, et seq.]. Contractors who apply or bid for an award of $100,000 or more shall file the certification required by 49 CFR part 20, "New Restrictions on Lobbying." Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352. Each tier shall also disclose the name of any registrant under the Lobbying Disclosure Act of 1995 who has made lobbying contacts on its behalf with non-Federal funds with respect to that Federal contract, grant or award covered by 31 U.S.C. 1352. Such disclosures are forwarded from tier to tier up to the recipient.

1.14. CLEAN AIR. Contractor agrees to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act, as amended, 42 U.S.C. §§ 7401 et seq. Contractor agrees to report each violation to the Participant and understands and agrees that the Participant will, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office.

Contractor also agrees to include these requirements in each subcontract exceeding $100,000 financed in whole or in part with Federal assistance provided by FTA.

1.15. CLEAN WATER. The Contractor agrees to comply with all applicable standards, orders or regulations issued pursuant to the Federal Water Pollution Control Act, as amended, 33 U.S.C. 1251 et seq.

Contractor agrees to report each violation to the Participant and understands and agrees that the Participant will, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office.

Contractor also agrees to include these requirements in each subcontract exceeding $100,000 financed in whole or in part with Federal assistance provided by FTA.

1.16. CARGO PREFERENCE - Use of United States-Flag Vessels. Contractor agrees to:
(a) Use privately owned United States-Flag commercial vessels to ship at least 50 percent of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 42
to the underlying contract to the extent such vessels are available at fair and reasonable rates for United States-Flag commercial vessels;
(b) Furnish within 20 working days following the date of loading for shipments originating within the United States or within 30 working days following the date of leading for shipments originating outside the United States, a legible copy of a rated, "on-board" commercial ocean bill-of -lading in English for each shipment of cargo described in the preceding paragraph to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to the FTA recipient (through the contractor in the case of a subcontractor's bill-of-lading.) (c) Include these requirements in all subcontracts issued pursuant to this Contract when the subcontract may involve the transport of equipment, material, or commodities by ocean vessel.

1.17. ENERGY CONSERVATION. Contractor agrees to comply with mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act.

1.18. BUS TESTING. Contractor agrees to comply with the Bus Testing requirements under 49 U.S.C. A 5318(e) and FTA's implementing regulation at 49 CFR Part 665 to ensure that the requisite testing is performed for all new bus models or any bus model with a major change in configuration or components, and that the bus model has achieved a passing score. Upon completion of the testing, Contractor shall obtain a copy of the bus testing reports from the operator of the testing facility and make that report publicly available prior to final acceptance of the first vehicle by the recipient.

1.19. PRE-AWARD AND POST-DELIVERY AUDIT REQUIREMENTS. Contractor agrees to comply with 49 U.S.C. § 5323(m) and FTA's implementing regulation at 49 C.F.R. part 663. Contractor shall comply with the Buy America certification(s) submitted with its proposal/bid. Contractor agrees to participate and cooperate in any pre-award and post-delivery audits performed pursuant to 49 C.F.R. part 663 and related FTA guidance. Contractor shall submit manufacturer’s FMVSS self-certification, Federal Motor Bus Safety Standards, that the bus complies with relevant FMVSS or manufacturer’s certified statement that the contracted buses will not be subject to FMVSS regulations.

1.20. FLY AMERICA. Contractor agrees to comply with 49 USC 40118 (the “Fly America” Act) in accordance with the General Services Administration’s regulations at 41 CFR Part 301-10, which provide that recipients and sub recipients of federal funds and their Contractors are required to use U.S. flag air carriers for U.S. government-financed international air travel and transportation of their personal effects or property, to the extent such service is available, unless travel by foreign air carrier is a matter of necessity, as defined by the Fly America Act. Contractor shall submit, if a foreign air carrier was used, an appropriate certification or memorandum adequately explaining why service by a U.S.-flag air carrier was not available or why it was necessary to use a foreign air carrier and shall, in any event, provide a certificate of compliance with the Fly America requirements. Contractor agrees to include the requirements of this section in all subcontracts that may involve international air transportation.

1.21. CONTRACT WORK HOURS AND SAFETY STANDARDS ACT. For all contracts in excess of $100,000 that involve the employment of mechanics or laborers, Contractor shall comply with the Contract Work Hours and Safety Standards Act (40 U.S.C. §§ 3701- 3708), as supplemented by the DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 43
Department of Labor regulations at 29 C.F.R. part 5. Under 40 U.S.C. § 3702 of the Act, Contractor shall compute the wages of every mechanic and laborer, including watchmen and guards, on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. § 3704 are applicable to construction work and provide that no laborer or mechanic be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchase of supplies or materials or articles ordinarily available on the open market, or to contracts for transportation or transmission of intelligence.

In the event of any violation of the clause set forth herein, Contractor and any subcontractor responsible therefor shall be liable for the unpaid wages. In addition, Contractor and subcontractor shall be liable to the United States (in the case of work done under contract for the District of Columbia or a territory, to such District or to such territory), for liquidated damages. Liquidated damages will be computed with respect to each individual laborer or mechanic, including watchmen and guards, employed in violation of this clause in the sum of $10 for each calendar day on which such individual was required or permitted to work in excess of the standard workweek of forty hours without payment of the overtime wages required by this clause.

The Participant will upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld, from any moneys payable on account of work performed by the Contractor or subcontractor under any such contract or any other Federal contract with the same prime Contractor, or any other federally-assisted contract subject to the Contract Work Hours and Safety Standards Act, which is held by the same prime Contractor, such sums as may be determined to be necessary to satisfy any liabilities of such Contractor or subcontractor for unpaid wages and liquidated damages as provided in this section.

Contractor or subcontractor shall insert in any subcontracts the clauses set forth in this section and also a clause requiring the subcontractors to include these clauses in any lower tier subcontracts. The prime Contractor shall be responsible for compliance by any subcontractor or lower tier subcontractor with the clauses set forth in this agreement.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 44
Exhibit E
Federal Transit Administration Certifications
[attached as a separate document from Solicitation Exhibit A-3] DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 EXHIBIT A-3 FTA CERTIFICATIONS

BIDDER S GOVERNMENT WIDE DEBARMENT AND SUSPENSION CERTIFICATION Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

Bidder certifies it will comply and facilitate compliance with U.S. h adopts and supplements the U.S. Office of
Bidder hereby certifies that:

1. its principals, affiliates, and subcontractors are eligible to participate in this contract and are not presently declared by any Federal department or agency to be:
a) Debarred from participation in any federally assisted Award; b) Suspended from participation in any federally assisted Award; c) Proposed for debarment from participation in any federally assisted Award; d) Declared ineligible to participate in any federally assisted Award; e) Voluntarily excluded from participation in any federally assisted Award; or f) Disqualified from participation in ay federally assisted Award.

2. it has not had one or more public transactions (Federal, State, or local) terminated for cause or default within a three-year period preceding this Certification,

3. it will treat each lower tier contract or lower tier subcontract under this contract as a covered lower tier contract for purposes of 2 CFR part 1200 and 2 CFR part 180 if it equals or exceeds $25,000, is for audit services, or requires the consent of a Federal official.

4. it will require that each covered lower tier contractor and subcontractor:
a) Comply and facilitate compliance with the Federal requirements of 2 CFR parts 180 and 1200, and
b) Assure that each lower tier participant in its Project is not presently declared by any Federal department or agency to be:
a. Debarred from participation in its federally funded Project, b. Suspended from participation in its federally funded Project, c. Proposed for debarment from participation in its federally funded Project, d. Declared ineligible to participate in its federally funded Project, e. Voluntarily excluded from participation in its federally funded Project, or f. Disqualified from participation in its federally funded Project, and

5. Signature Page if it or any of its principals, including any of its first tier Subrecipients or its Third

GILLIG LLC
JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Party Participants at a lower tier, is unable to certify compliance with the preceding statements in this Certification Group.

6. if, at a later time, it receives any information that contradicts the statements of this certification, bidder will promptly provide that information to FTA.

The certification in this clause is a material representation of fact relied upon by Enterprise Services. If it is later determined by Enterprise Services that the bidder knowingly rendered an erroneous certification, in addition to remedies available to Enterprise Services, the Federal Government may pursue available remedies, including but not limited to suspension and/or debarment. The bidder agrees to comply with the requirements of 2 C.F.R. part 180, subpart C, as supplemented by 2 C.F.R. part 1200, while this offer is valid and throughout the period of any contract that may arise from this offer. The bidder further agrees to include a provision requiring such compliance in its lower tier covered transactions.

If the bidder is unable to certify to the statement above, it shall attach an explanation, and indicate that Bidder certifies or affirms the truthfulness and accuracy of each statement of its certification and explanation, if any. In addition, bidder understands and agrees that the provisions of 31 U.S.C. §§ 3801 et seq. apply to this certification and explanation, if any.

BIDDER NAME: _____________________________________________________ tity name of the firm submitting the Bid
By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
__________________________
Sign

GILLIG LLC

VICE PRESIDENT SALES

JOSEPH POLICARPIO
JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

BUS TESTING CERTIFICATION
Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

The undersigned certifies that the bus offered in this procurement complies and will, when delivered, regulation at 49 CFR Part 665 according to the
indicated:

1. The buses offered in this bid have been tested in accordance with 49 CFR Part 665 on _____________ (date). If multiple buses are being proposed, provide additional bus testing information below or on attached sheet. The buses being sold must have the identical configuration and major components as the bus in the test report, which must be submitted with this bid. If the configuration or components are not identical, then bidder shall provide not a major change requiring additional testing. If multiple buses are being proposed, testing data on additional buses shall be listed on the bottom of this page.

2. service in the United States before October 1, 1988, and is currently being produced without a major change in configuration or components), and submits with this Proposal the name and address of the recipient of such a bus and the details of that buses configuration and major components.

3. The bus is a new model and will be tested and the results will be submitted to the Purchaser prior to acceptance of the first bus.

If applicable, a link to the test report (for each bid model) prepared by the Federal Transit linked file is a true and correct copy of the test report as prepared by the facility.

The undersigned understands that misrepresenting the testing status of a vehicle acquired with Federal financial assistance may subject the undersigned to civil penalties as outlined in the U.S. Department of Transportation's regulation on Program Fraud Civil Remedies, 49 CFR Part 31. In addition, the undersigned understands that FTA may suspend or debar a manufacturer under the procedures in 49 CFR Part 29.

BIDDER NAME: _____________________________________________________

By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
___________________________
gnat ized person
*SEE BELOW

GILLIG LLC

JOSEPH POLICARPIO
VICE PRESIDENT SALES JUNE 12, 2020
THE FOLLOWING ALTOONA TEST REPORTS CAN BE ACCESSED AT http://apps.altoonabustest.psu.edu/buses?sort_by=manufacturer PTI-BT-R0410 35'40' DIESEL http://apps.altoonabustest.psu.edu/buses/reports/86.pdf?1395932280 PTI-BT-T9922-06-00 29' DIESEL http://apps.altoonabustest.psu.edu/buses/reports/321.pdf?1330612797 PTI-BT-R1306 35'/40' CNG http://apps.altoonabustest.psu.edu/buses/reports/434.pdf?1454962357 PTI-BT-R1109 29' CNG http://apps.altoonabustest.psu.edu/buses/reports/390.pdf?1340301465 PTI-BT-R1206-P 35'/40' BAE HYBRID http://apps.altoonabustest.psu.edu/buses/reports/409.pdf?1347373958 GILLIG’S BATTERY ELECTRIC BUS IS A NEW BUS MODEL OR A BUS PRODUCED WITH A MAJOR CHANGE IN COMPONENTS OR CONFIGURATION. GILLIG’S BATTERY ELECTRIC BUS, BASED ON GILLIG’S PROVEN LOW FLOOR PLATFORM, IS SCHEDULED TO BE AT THE ALTOONA TEST TRACK AS SOON AS RESUMPTION OF TESTING COMMENCES. THE RESULTS WILL BE SUBMITTED TO THE PURCHASER PRIOR TO ACCEPTANCE OF THE FIRST BUS.

REFERENCE OUR ATTACHED CERTIFICATION.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

ALTOONA BUS TEST CERTIFICATION
3-2019

ALTOONA BUS TEST CERTIFICATION
This is to certify that the bus model proposed for your procurement complies with the bus testing regulations required by the Surface Transportation and Uniform Relocation Assistance Act of 1987 as defined in the Interim Final Rulemaking (IFR) by the FTA in the Federal Register 49 CFR Part 665, dated July 28, 1992 and the Final Rule in the Federal Register 49 CFR part 665, dated August 1, 2016.

This statement means that the proposed vehicle complies with one or more of the clauses below, as required by the above IFR:
was in mass transportation service prior to September 30, 1988, or is the same vehicle model that has been previously tested in PTI (Altoona), and that any new component(s) has (have) been tested at PTI (Altoona), or the installation of any new component(s) did not result in significant structural modification to the vehicle; or
the installation of the component(s) did not result in a significant change in the data obtained from previous testing of the vehicle model.
is a new bus model or a bus produced with a major change in components or configuration and shall provide a copy of the final test report to the recipient prior to the recipient’s final acceptance of the first vehicle.

GILLIG LLC
By:

JOSEPH POLICARPIO
Title: VICE PRESIDENT SALES
Date: JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

TESTING & DESIGN OPERATING PROFILE VALIDATION
o
o
o
o
o
o
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

TESTING & DESIGN OPERATING PROFILE VALIDATION
o
o
o
o
o
o
o
o
o
o
o
o
o
o
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

BUY AMERICA ROLLING STOCK CERTIFICATION
Certificate of Compliance with Buy America Rolling Stock Requirements Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

The bidder or offeror hereby certifies that it will comply with the requirements of 49 U.S.C. 5323, and the applicable regulations of 49 CFR 661.11.

BIDDER NAME: _____________________________________________________

By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________
Certificate of Non-Compliance with Buy America Rolling Stock Requirements Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

The bidder or offeror hereby certifies that it cannot comply with the requirements of 49 U.S.C.5323, but may qualify for an exception to the requirement consistent with 49 U.S.C.5323, and the applicable regulations in 49 CFR 661.7.

BIDDER NAME: _____________________________________________________

By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
___________________________
gnatur ized person

GILLIG LLC

JOSEPH POLICARPIO
VICE PRESIDENT SALES JUNE 12, 2020
------
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

CERTIFICATION AND RESTRICTIONS ON LOBBYING
Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

Bidder hereby certifies, to the best of its knowledge and belief, that:
1) No federal appropriated funds have been paid or will be paid, by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, and officer or employee of Congress, or an employee of a Member of Congress in connection with the awarding of any federal contract, the making of any federal grant, the making of any federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any federal contract, grant, loan, or cooperative agreement.
2) If any funds other than federal appropriated funds have been paid or will be paid to any person influencing or attempting to influence an officer or employee of any agency, a Member of Congress, and officer or employee of Congress, or an employee of a Member of Congress in connection with the federal contract, grant, loan, or cooperative agreement, the undersigned accordance with its instructions [as amended by "Government wide Guidance for New Restrictions on Lobbying," 61 Fed. Reg. 1413 (1/19/96). Note: Language in paragraph (2) herein has been modified in accordance with Section 10 of the Lobbying Disclosure Act of 1995 (P.L. 104-65, codified at 2 U.S.C. 1601, et seq.)]
3) The undersigned shall require that the language of this certification be included in the award documents for all sub-awards at all tiers (including sub-contracts, sub- grants and contracts under grants, loans, and cooperative agreements) and that all sub-recipients shall certify and disclose accordingly.

This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Submission of this certification is a prerequisite for making or entering into this transaction imposed by 31 U.S.C. § 1352 (as amended by the Lobbying Disclosure Act of 1995). Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure.

The undersigned certifies or affirms the truthfulness and accuracy of the contents of the statements submitted on or with this certification and understands that the provisions of 31 U.S.C. Section 3801, et seq., are applicable thereto.

BIDDER NAME: _____________________________________________________ By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
___________________________
Signat orized person

GILLIG LLC

JOSEPH POLICARPIO
VICE PRESIDENT SALES JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

TRANSIT VEHICLE MANUFACTURER DBE CERTIFICATION
Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

The bidder hereby certifies that it has complied with the requirements of 49 C.F.R. part 26.49, which requires the Transit Vehicle Manufacturer to submit
Disadvantaged Business Enterprises (DBE) requirements in FTA assisted procurements of transit vehicles.

BIDDER NAME: _____________________________________________________

By: ______________________________
Title: ______________________________
Title of person signing certificate
___________________________________
Print Name of person making certifications for Bidder
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
___________________________
Signat uthorized person

GILLIG LLC

VICE PRESIDENT SALES

JOSEPH POLICARPIO
JUNE 12, 2020
REFERENCE OUR ATTACHED CERTIFICATION.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

DBE/MBE CERTIFICATION

DISADVANTAGED/MINORITY BUSINESS ENTERPRISE (DBE/MBE) CERTIFICATION GILLIG LLC, 451 Discovery Drive, Livermore California 94551, hereby certifies that GILLIG LLC has complied with the requirements of 49 CFR Part 26 of the Transportation Assistance Act of 1982, and submitted the required documents to the Federal Transit Administration (FTA).

The FTA advised that GILLIG has obtained 49 C.F.R. Part 26.49 certification and we are eligible to bid on federally funded contracts in FY2020. Transit customers may call the FTA for verification.

BRITNEY BERRY

FEDERAL TRANSIT ADMINISTRATION
Office of Civil Rights
1200 New Jersey Avenue SE
Washington, DC 20590
Phone: 202-366-1065
E-mail: [email protected]

GILLIG LLC
By:

JOSEPH POLICARPIO
Title: VICE PRESIDENT SALES
Date: JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

FEDERAL MOTOR VEHICLE SAFETY STANDARDS (FMVSS) PRE-AWARD REVIEW Bidder, through the duly authorized undersigned, makes this certification as a required element of submitting a responsive bid. Bidder certifies, to the best of its knowledge and belief, that the following are true, complete, correct, and made in good faith:

The bidder hereby certifies that it has complied with the requirements of 49 C.F.R. part 663 Subpart D, which requires the Transit Vehicle Manufacturer to submit a certification that it has complied with Federal Motor Vehicle Safety Standards issued by the National Highway Traffic Safety Administration in 49 CFR part 571.

BIDDER NAME: _____________________________________________________ Print Name of Bidder
By: ______________________________
Signature
Title: ______________________________

___________________________________
Print Name
Date: ________________________________

GILLIG LLC
JUNE 12, 2020
__________________________
Signature

GILLIG LLC

VICE PRESIDENT SALES

JOSEPH POLICARPIO
JUNE 12, 2020
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 EXHIBIT 3

WASHINGTON CONTRACT

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

WASHINGTON STATE TRANSIT BUS COOPERATIVE

STATE COOPERATIVE PURCHASING SCHEDULE

MASTER CONTRACT
NO. 06719-01
TRANSIT BUSES: HEAVY DUTY
30 FT DIESEL, 35 FT DIESEL, 40 FT DIESEL 35 FT HYBRID, 40 FT HYBRID, 30 FT CNG, 35 FT, CNG, 40 FT CNG, 35 FT ELECTRIC, 40 FT ELECTRIC CATEGORIES
For Use by Washington State Transit Bus Cooperative Participants By and Between

STATE OF WASHINGTON

DEPARTMENT OF ENTERPRISE SERVICES
and

GILLIG LLC
Dated April 1, 2021

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 1

WASHINGTON STATE TRANSIT BUS COOPERATIVE

STATE COOPERATIVE PURCHASING SCHEDULE

MASTER CONTRACT
NO. 06719
TRANSIT BUS – HEAVY DUTY
30 FT DIESEL, 35 FT DIESEL, 40 FT DIESEL 35 FT HYBRID, 40 FT HYBRID, 30 FT CNG, 35 FT, CNG, 40 FT CNG, 35 FT ELECTRIC, 40 FT ELECTRIC CATEGORIES
This Master Contract (“Master Contract”) is made and entered into by and between the State of Washington acting by and through the Department of Enterprise Services, a Washington State governmental agency (“Enterprise Services”) and Gillig LLC, a California company (“Contractor”) and is dated and effective as of April 1, 2021.

RECITALS
A. Whereas, pursuant to Legislative direction codified in RCW chapter 39.26, Enterprise Services, on behalf of the State of Washington, is authorized to develop, solicit, and establish master contracts for goods and/or services for general use by Washington state agencies and certain other entities (eligible Participants).

B. Whereas, pursuant to RCW 39.26.060, Enterprise Services may develop, solicit, and establish cooperative purchasing agreements for procurement of any goods or services with one or more states, state agencies, local governments, local government agencies, federal agencies, or tribes located in the state, in accordance with an agreement entered into between the participants.

C. Whereas, pursuant to Section 3019 of the FAST Act, the State of Washington acting by and through Enterprise Services, may enter into a cooperative procurement contract with one or more vendors if the vendors agree to provide an option to purchase rolling stock and related equipment to such State government and any other participant and such State government acts throughout the term of the contract as the lead procurement agency.

D. The State of Washington, acting by and through Enterprise Services is a member of and the lead procurement for the Washington State Transit Bus Cooperative. The Washington State Transit Bus Cooperative is a cooperative purchasing agreement for eligible participants to procure transit buses through a competitively solicited and awarded Cooperative Master Contract.

E. Whereas, on behalf of the State of Washington, Enterprise Services, as part of a competitive governmental procurement, issued a Competitive Solicitation No. 06719-01 dated March 4, 2020 regarding Heavy Duty Transit Buses.

F. Whereas, Enterprise Services evaluated all responses to the Competitive Solicitation and identified Contractor as an apparent successful bidder.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 2
G. Whereas, Enterprise Services has determined that entering into this Master Contract will meet the identified needs and be in the best interest of the State of Washington and the Washington State Transit Bus Cooperative.

H. Whereas, the purpose of this Master Contract is to enable eligible Participants to purchase Transit Buses as set forth herein.

AGREEMENT
NOW THEREFORE, in consideration of the mutual promises, covenants, and conditions set forth herein, the parties hereto hereby agree as follows:

1. TERM.

The term of this Master Contract is twenty-four (24) months, commencing April 1, 2021 and ending March 31, 2023; Provided, however, that Enterprise Services at is sole discretion may extend the term for three (3) subsequent twelve (12) month extensions if Contractor is not in default; and provided further, that in no event shall such term be extended if Contractor cannot meet the required certifications of this Contract. The maximum contract term is sixty (60) months, ending March 31, 2026.

2. ELIGIBLE PARTICIPANTS. This Master Contract may be utilized by any of the following types of entities (“Participants”):

2.1. WASHINGTON STATE AGENCIES. All Washington state agencies, departments, offices, divisions, boards, and commissions.

2.2. WASHINGTON STATE INSTITUTIONS OF HIGHER EDUCATION (COLLEGES). Any the following institutions of higher education in Washington:
ƒ State universities – i.e., University of Washington & Washington State University; ƒ Regional universities – i.e., Central Washington University, Eastern Washington University, & Western Washington University
ƒ Evergreen State College;
ƒ Community colleges; and
ƒ Technical colleges.

2.3. MCUAPARTIES. Any of the following types of entities that have executed a Master Contract Usage Agreement with Enterprise Services:
ƒ Political subdivisions (e.g., counties, cities, school districts, public utility districts) in the State of Washington;
ƒ Federal governmental agencies or entities;
ƒ Public-benefit nonprofit corporations (i.e., § 501(c)(3) nonprofit corporations that receive federal, state, or local funding); and
ƒ Federally-recognized Indian Tribes located in the State of Washington.

2.4. TRANSIT BUS COOPERATIVE PARTIES. Any authorized entity that has executed a Washington State Transit Bus Cooperative Purchasing Agreement with Enterprise Services. The following types of entities are anticipated to execute a Washington State Transit Bus Cooperative Purchasing Agreement:

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 3
ƒ State agencies, local governments, local government agencies, or political subdivisions (e.g., counties, cities, school districts, public utility districts, ports) of any state or territory of the United States;
ƒ Federal governmental agencies or entities located in any state or territory of the United States; and
ƒ Federally-recognized Indian Tribes located in any state or territory of the United States

3. SCOPE – INCLUDED GOODS AND PRICE.

3.1. CONTRACT SCOPE. Pursuant to this Master Contract, Contractor is authorized to sell only those Transit Buses within the scope of their authorized goods meeting the requirements set forth in Exhibit A – Included Transit Buses for the prices set forth in Exhibit B – Prices. Contractor shall not represent to any Participant under this Master Contract that Contractor has contractual authority to sell any Transit Buses beyond those meeting the requirements set forth in Exhibit A – Included Transit Buses.

3.2. STATE’S ABILITY TO MODIFY SCOPE OF MASTER CONTRACT. Subject to mutual agreement between the parties, Enterprise Services reserves the right to modify the goods included in this Master Contract; Provided, however, that any such modification shall be effective only upon thirty (30) days advance written notice; and Provided further, that any such modification must be within the scope of this Master Contract. Enterprise Services may, at any time, without notice to Contractor by written order designated or indicated to be a change order, make changes within the general scope of the contract to adjust the quantities of Transit Buses purchased under this Master Contract.

3.3. PARTICIPANT CHANGE ORDERS.
(a) Participants may, at any time, by written order designated or indicated to be a change order, make changes in their Purchase Order within the general scope of this Master Contract, including changes: (1) In the specifications; (2) In the method or manner of performance of the work; (3) In the price sheet to include additional options within the scope of the contract; (4) In the delivery performance of the work; or (5) In additional requirements for compliance with state or federal law.
(b) Any other written or oral order (which includes direction, instruction, interpretation, or determination) from the Participant that causes a change shall be treated as a change order under this clause; provided, that Contractor gives the Participant written notice stating (1) the date, circumstances, and source of the order and (2) that Contractor regards the order as a change order.
(c) Except as provided in this clause, no order, statement, or conduct of the Participant shall be treated as a change under this clause or entitle Contractor to an equitable adjustment. (d) If any change under this clause causes an increase or decrease in Contractor’s cost of, or the time required for, the performance of any part of the work under this Master Contract, whether or not changed by any such order, the Participant will make an equitable adjustment and modify the Purchase Order in writing. However, except for an adjustment based on defective specifications, no adjustment for any change under this clause shall be made for any costs incurred more than twenty (20) days before Contractor gives written notice as required. In the case of defective specifications for which the Participant is responsible, the equitable adjustment shall include any increased cost DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 4
reasonably incurred by the Contractor in attempting to comply with the defective specifications.
(e) Contractor will assist Participant in obtaining all of the requested cost details as may be required for FTA assisted purchases. Failure to respond or provide needed details may be grounds for the Participant to cancel the purchase without penalty. (f) The Contractor must assert its right to an adjustment under this clause within 30 days after

1. receipt of a written change order under paragraph (a) of this clause or

2. the furnishing of a written notice under paragraph (b) of this clause, by submitting to the Contracting Officer a written statement describing the general nature and amount of proposal, unless this period is extended by the Participant. The statement of proposal for adjustment may be included in the notice under paragraph (b) above.
(g) No proposal by the Contractor for an equitable adjustment shall be allowed if asserted after final payment under this Master Contract.
(h) This clause does not supersede FTA Circular C 4220.1F.

3.4. ECONOMIC ADJUSTMENT. Beginning twelve (12) months after the effective date of this Master Contract and for every annual anniversary thereafter, the prices set forth in Exhibit B shall be adjusted, based upon the percent changes (whether up or down) in the United States Department of Labor, Bureau of Labor and Statistics (BLS) indices described below, for the most recent year. The Index is the Producer Price Index for Truck and Bus Bodies, Series No. WPU 1413, published by the United States Department of Labor, Bureau of Labor Statistics, or if such Index is no longer in use, then such replacement that is most comparable to the Index as may be designated by the Bureau of Labor Statistics, or as agreed by the parties. Economic adjustment will lag one (1) calendar quarter past the Master Contract commencement date to allow for publication of BLS data. All calculations for the index shall be based upon the latest version of data published as of April 1 each year. Prices shall be adjusted on June 1. If an index is recoded, that is the replacement is a direct substitute according to the BLS, this Master Contract will instead use the recode. If an index becomes unavailable, Enterprise Services shall substitute a proxy index. If there is not a direct substitute, the next higher aggregate index available will be used. The economic adjustment shall be calculated as follows:

New Price = Old Price x (Current Period Index/Base Period Index).

3.5. PRICE CEILING. Although Contractor may offer lower prices to Participants, during the term of this Master Contract, Contractor guarantees to provide the Heavy Duty Transit Buses at no greater than the prices set forth in Exhibit B – Prices for Heavy Duty Transit Buses (subject to economic adjustment as set forth herein).

3.6. GOODS AND SERVICES ADDITION. Contractor may offer new goods and services within the scope of the authorized goods set forth in Exhibit A – Included Transit Buses to Participants to implement new technology solutions or meet specific Participant requirements. Goods and services added to purchase orders under the Master Contract must be commercially available at the time they are added and fall within the original scope of the Master Contract.

3.7. PRICING OF GOODS AND SERVICE ADDITIONS. Prices for additional Transit Bus goods and services performed under this Master Contract follow cost reimbursement rules under 4220.1F Ch VI, DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 5

2.c(1). Cost-reimbursement provides for payment of Contractor’s allowable incurred costs, to the extent agreed to in the Contractor’s agreement with the Participant. Participants are required to include FAR Part 31 cost principles in their cost reimbursement contracts for the purpose of determining allowable costs under the contract. Contract shall comply with Participants’ requests in determining reasonable prices, including but not limited to providing a breakdown of relevant incurred costs or individual component pricing to Participant upon request. A dispute on the reimbursement costs will follow the dispute procedures of this Master Contract.

3.8. MASTER CONTRACT INFORMATION. Enterprise Services shall maintain and provide information regarding this Master Contract, including scope and pricing, to eligible Participants.

4. CONTRACTOR REPRESENTATIONS AND WARRANTIES. Contractor makes each of the following representations and warranties as of the effective date of this Master Contract and at the time any order is placed pursuant to this Master Contract. If, at the time of any such order, Contractor cannot make such representations and warranties, Contractor shall not process any orders and shall, within three (3) business days notify Enterprise Services, in writing, of such breach.

4.1. QUALIFIED TO DO BUSINESS. Contractor represents and warrants that it is in good standing and qualified to do business in the State of Washington, that it is registered with the Washington State Department of Revenue and the Washington Secretary of State, that it possesses and shall keep current all required licenses and/or approvals, and that it is current, in full compliance, and has paid all applicable taxes owed to the State of Washington. Contractor represents and warrants that it is or will be qualified to do business in other applicable states for purchases under this Master Contract with each of the Washington State Transit Bus Cooperative member states, including but not limited to Alaska, Idaho, Oregon, Colorado, Montana, and Nevada.

4.2. SUSPENSION & DEBARMENT. Contractor represents and warrants that neither it nor its principals or affiliates presently are debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation in any governmental contract by any governmental department or agency within the United States.

4.3. QUALITY OF GOODS OR SERVICES. Contractor represents and warrants that any Transit Bus sold pursuant to this Master Contract shall be merchantable, shall conform to this Master Contract and Participant’s Purchase Order, shall be fit and safe for the intended purposes, shall be free from defects in materials and workmanship, and shall be produced and delivered in full compliance with applicable law. Contractor further represents and warrants it has clear title to the goods and that the same shall be delivered free of liens and encumbrances and that the same do not infringe any third party patent. The rights and remedies of the parties under this warranty are in addition to any other rights and remedies of the parties provided by law or equity, including, without limitation, actual damages, and, as applicable and awarded under the law, to a prevailing party, reasonable attorneys’ fees and costs. Whenever under the Master Contract or Purchase Order it is provided that Contractor shall furnish materials or manufactured components or shall do work for which no detailed specifications are set forth, the work performed shall be in full conformity and harmony with the intent to secure the best standards of manufacture in the work as a whole or in part. No advantage shall be taken by Contractor in the omission of any part or detail which goes to make the Transit Buses complete and ready for service, even though such part or detail is not mentioned in the specifications or in Contractor's approved design.

4.4. EXECUTIVE ORDER 18-03 – WORKERS’ RIGHTS (MANDATORY INDIVIDUAL ARBITRATION). Contractor represents and warrants, as previously certified in Contractor’s bid submission, that Contractor DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 6
does NOT require its employees, as a condition of employment, to sign or agree to mandatory individual arbitration clauses or class or collective action waivers. Contractor further represents and warrants that, during the term of this Contract, Contractor shall not, as a condition of employment, require its employees to sign or agree to mandatory individual arbitration clauses or class or collective action waivers.

4.5. OREGON REVISED STATUTE 279A.112. Contractor represents and warrants, as previously certified in Contractor’s bid submission, that their firm has a written policy and practice preventing sexual harassment, sexual assault and discrimination against employees who are members of a protected class.

4.6. EMISSIONS INFORMATION. Contractor represents and warrants, as previously certified in Contractor’s bid submission, that their firm has a written policy and practice to assess and provide accurate emission information on products to Participants.

4.7. SUSTAINABILITY POLICY. Contractor represents and warrants, as previously certified in Contractor’s bid submission, that their firm has a written policy and practice, detailing own sustainability policies and programs in place and to provide services in line with the principles established therein.

4.8. PROCUREMENT ETHICS & PROHIBITION ON GIFTS. Contractor represents and warrants that it complies fully with all applicable procurement ethics restrictions including, but not limited to, restrictions against Contractor providing gifts or anything of economic value, directly or indirectly, to Participants’ employees.

4.9. WASHINGTON’S ELECTRONIC BUSINESS SOLUTION (WEBS). Contractor represents and warrants that it is registered in Washington’s Electronic Business Solution (WEBS), Washington’s contract registration system and that, all of its information therein is current and accurate and that throughout the term of this Master Contract, Contractor shall maintain an accurate profile in WEBS.

4.10. STATEWIDE PAYEE DESK. Contractor represents and warrants that it is registered with the Statewide Payee Desk, which registration is a condition to payment.

4.11. COOPERATIVE MASTER CONTRACT PROMOTION; ADVERTISING AND ENDORSEMENT. Contractor represents and warrants that it shall use commercially reasonable efforts both to promote and market the use of this Master Contract with eligible Participants and to ensure that those entities that utilize this Master Contract are eligible Participants. Contractor understands and acknowledges that neither Enterprise Services nor Participants are endorsing Contractor’s goods and/or services or suggesting that such goods and/or services are the best or only solution to their needs.

Accordingly, Contractor represents and warrants that it shall make no reference to Enterprise Services, any Participant, or the State of Washington in any promotional material without the prior written consent of Enterprise Services.

4.12. MASTER CONTRACT TRANSITION. Contractor represents and warrants that, in the event this Master Contract or a similar contract resulting from the Cooperative, is transitioned to another contractor (e.g., Master Contract expiration or termination), Contractor shall use commercially reasonable efforts to assist Enterprise Services for a period of sixty (60) days to effectuate a smooth transition to another contractor to minimize disruption of service and/or costs to the State of Washington.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 7

4.13. VEHICLE TITLE & REGISTRATION. Contractor represents and warrants that upon payment in full, Contractor shall convey to Participant all necessary paperwork, including a “manufacturer’s statement of origin” (MSO) and applicable state title application to register the Transit Bus with the Participant’s applicable state licensing authority at the time of delivery.

4.14. WAGE VIOLATIONS. Contractor represents and warrants that, during the term of this Master Contract and the three (3) year period immediately preceding the award of the Master Contract, it is not determined, by a final and binding citation and notice of assessment issued by the Washington Department of Labor and Industries or through a civil judgment entered by a court of limited or general jurisdiction, to be in willful violation of any provision of Washington state wage laws set forth in RCW chapters 49.46, 49.48, or 49.52.

4.15. PAY EQUITY. Contractor represents and warrants that, among its workers, similarly employed individuals are compensated as equals. For purposes of this provision, employees are similarly employed if the individuals work for the same employer, the performance of the job requires comparable skill, effort, and responsibility, and the jobs are performed under similar working conditions. Job titles alone are not determinative of whether employees are similarly employed.

Contractor may allow differentials in compensation for its workers based in good faith on any of the following: a seniority system; a merit system; a system that measures earnings by quantity or quality of production; a bona fide job-related factor or factors; or a bona fide regional difference in compensation levels. A bona fide job-related factor or factors may include, but not be limited to, education, training, or experience that is: consistent with business necessity; not based on or derived from a gender-based differential; and accounts for the entire differential. A bona fide regional difference in compensation level must be consistent with business necessity; not based on or derived from a gender-based differential; and account for the entire differential.

Notwithstanding any provision to the contrary, upon breach of warranty and Contractor’s failure to provide satisfactory evidence of compliance within thirty (30) days, Enterprise Services may suspend or terminate this Master Contract and any Participant hereunder similarly may suspend or terminate its use of the Master Contract and/or any agreement entered into pursuant to this Master Contract.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 8

5. USING THE MASTER CONTRACT – PURCHASES.

5.1. ORDERING REQUIREMENTS. Participants shall order Transit Buses from this Master Contract, consistent with the terms hereof and by using any ordering mechanism agreeable both to Contractor and Participant but, at a minimum, including the use of a purchase order. When practicable, Contractor and Participant also shall use telephone orders, email orders, web-based orders, and similar procurement methods (collectively “Purchase Order”). All order documents must reference the Master Contract number. Consistent with Participant’s procurement authority, Participant may propose and negotiate additional terms with the applicable Contractor to meet Participant’s needs, subject to agreement with the applicable Contractor. Under no circumstances will Participant’s agreements change or modify the contract obligations of this Master Contract. The terms of this Master Contract shall apply to any Purchase Order and, in the event of any conflict, the terms of this Master Contract shall prevail. Notwithstanding any provision to the contrary, in no event shall any ‘click-agreement,’ software or web-based application terms and conditions, or other agreement modify the terms and conditions of this Master Contract.

5.2. APPROVAL OF PURCHASES. Enterprise Services and, if the Participant is using FTA funds, the Participant’s respective authorization authority for use of those FTA funds shall approve the Participant’s initial Purchase Order. Enterprise Services shall review the Purchase Order and approve that the purchase is within the Scope of the Master Contract. The Participant’s respective authorization authority for use of those FTA funds will approve the purchase according to their own policies and procedures. Participant and Contractor shall provide timely information as requested by Enterprise Services for the approval process.

5.3. CONTRACTOR COOPERATIVE USE APPROVAL. Pursuant to RCW 39.26.060, the intent of this Contract is to allow for cooperative procurement to the maximum extent possible. Accordingly, any authorized entity that has executed a Washington State Transit Bus Cooperative Purchasing Agreement with Enterprise Services may place orders under this Master Contract. Participation in the cooperative is voluntary. If agreed to by Contractor, this Contract may be used by any participant in the cooperative to procure the Transit Buses. Contractor has the right to refuse initial orders by cooperative participants on a capacity basis, if the Contractor cannot fulfill the complete order based on delivery deadlines. Orders under this Contract will be fulfilled on a first come, first serve basis of the initial order date. If Contractor rejects an order for capacity, Enterprise Services may request additional information from the Contract regarding Contractor’s capacity to fulfill orders.

5.4. FTA PRE-AWARD AND POST-DELIVERY CERTIFICATIONS. Contractor shall take all reasonable steps assist Participants in completing all required pre-award and post-delivery certifications required by federal or state law or policy for purchases under this Master Contract. Contractor shall provide all requested information to complete the certifications in a reasonable time to ensure certifications are completed in a timely manner.

5.5. DELIVERY REQUIREMENTS. Contractor must ensure that delivery of Transit Buses will be made as required by this Master Contract, the Purchase Order used by Participants, or as otherwise mutually agreed in writing between the Participant and Contractor. The following apply to all deliveries:
(a) Contractor shall make all deliveries to the applicable delivery location specified in the Purchase Order by the delivery date. The delivery date must be within 18 months of the initial order date, as stated in the Purchaser Order or agreement between Participant and DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 9
Contractor; provided however that the Participant and Contractor may amend the delivery date by mutual agreement. Deliveries shall occur during Participant’s normal work hours and within the time period mutually agreed in writing between Participant and Contractor at the time of order placement.
(b) Contractor shall deliver all buses with a full tank of fuel and clean inside and out. For any bus not meeting this requirement, Contractor will be assessed $300. When Transit Buses are delivered, certificates or releases signed by Participant simply acknowledge receipt of the Transit Buses and do not constitute acceptance by the Participant of the condition of the Transit Buses, or its conformance with the terms of the Master Contract or Participant’s Purchase Order. Acceptance by Participant occurs subsequent to final inspection when Participant provides Contractor with a written Notice of Acceptance. (c) Contractor shall ship or deliver all goods and/or services purchased pursuant to this Master Contract, freight charges prepaid by Contractor, FOB Participant’s specified destination with all transportation and handling charges included. Contractor shall bear all risk of loss, damage, or destruction of the goods and/or services ordered hereunder that occurs prior to delivery, except loss or damage attributable to Participant’s negligence. Contractor shall use a qualified and experienced common or contract carrier who is properly licensed and insured. Contractor shall make all arrangements for shipment.
(d) All packing lists, packages, instruction manuals, correspondence, shipping notices, shipping containers, and other written materials associated with this Master Contract shall be identified by the Master Contract number set forth on the cover of this Master Contract and the applicable Participant’s Purchase Order number. Packing lists shall be included with each shipment and clearly identify all contents and any backorders.

5.6. PROTOTYPE BUSES. If requested by Participant, Contractor shall produce one prototype bus for each type of bus with respect to the Purchase Order for inspection and testing at the Participant’s facilities. The prototype bus will demonstrate that the bus fully meets all requirements of the Purchase Order. Contractor shall produce and deliver the prototype bus to Participant for inspection and testing a minimum of one-hundred twenty (120) days prior to initiation of any production activities for the remaining buses unless otherwise authorized in writing by Participant. The cost of transporting the prototype bus to and from the Participant’s facilities shall be at the expense of Contractor. Contractor shall schedule the prototype review with the Participant when a vehicle has been completed with all equipment and furnishings installed, but early enough so design changes resulting from the review will not delay production or cause scrapping of production material.

In the event of nonconformity Participant shall, to the extent practicable, notify Contractor of said nonconformity. No later than seven (7) days after the end of the fourteen (14) day test, Participant shall issue a written report to the Contractor that advises the Contractor of any noncompliance issues and/or any proposed modifications or changes required on the remaining vehicles. Any failure by Participant to detect any defects or omissions in this testing period will in no way relieve Contractor from fully complying with the specifications of the Master Contract and Participant Order. All prototype buses shall be brought up to the final production bus configuration in all respects at no additional cost to Participant, except as may be agreed by change orders.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 10

5.7. NOTIFICATION OF DELAY. Contractor shall provide prompt notice to Participant and Enterprise Services for any delay in the manufacturing process that will affect the expected delivery date.

Contractor will provide notice of the delay within fourteen (14) days of discovery of the potential delay. This notice of delay must include a reasonable expectation of when the delay will be resolved, the reason for the delay, whether the delay will cause the delivery to exceed the delivery date, and any other applicable information regarding the delay. ƒ Participant shall provide Contractor with notice of acceptance of the reasonable delay or notice that the delay is determined to be non-excusable within seven (7) days of receipt of the notice of delay.
ƒ If there is a dispute between Contractor and Participant as to whether the delay is reasonable, Contractor may appeal Participant’s decision to Enterprise Services within seven (7) days of receipt of the notice that the delay is non-excusable. Enterprise Services will review the provided information and make a final determination as to whether the delay is reasonable or non-excusable. If a dispute remains after this procedure, parties shall follow the dispute resolution process of Section 16. ƒ Contractor shall promptly comply with any request from Enterprise Services or Participant for additional information in making the delay determination. A request for more information from Enterprise Services or Participant tolls the time for required response until the time that Contractor responds to the request for more information. ƒ Reasonable delay is a delay for which the Contractor is not responsible. A reasonable delay must arise from unforeseeable causes, be beyond the control of Contractor, and be without the fault of the Contractor. A reasonable delay will extend the delivery date by the agreed upon length of the delay.
ƒ Non-excusable delay is a delay for which Contractor is wholly or partially responsible. A non-excusable delay is a delay that arises from a foreseeable cause, is within the control of Contractor, or is due to the fault of Contractor. A non-excusable delay will not extend the agreed upon delivery date.

5.8. DELAY DAMAGES. Participant will be damaged by any failure on the part of Contractor to deliver the buses within the time specified in delivery date. The amount of damages for delay of beyond the delivery date is difficult if not impossible to ascertain. The amount of such damages Contractor shall pay to Participant is fixed at the amount of $250.00 per day for each bus not delivered in substantially good condition as inspected by the Participant. Participant may elect to deduct the amount of the damages from the amount due to Contractor under the Purchase Order or may notify Contractor of the amount due based on the delay. If Participant requires Contractor to pay the delay damages, Contractor shall pay the entire amount within thirty (30) days after receipt of a written demand by Participant. The payment of damages will be in lieu of any damages for any loss of profit, loss of revenue, loss of use, or for any other direct, indirect, special or consequential losses or damages of any kind that may be suffered by Participant arising at any time from the failure of Contractor to fulfill the delivery obligations in a timely manner.

5.9. INSPECTION AND ACCEPTANCE OF TRANSIT BUSES. Transit Buses purchased under this Master Contract are subject to Participant’s reasonable inspection, testing, and approval at Participant’s destination for a period of fourteen (14) days from the date that the Transit Buses are received at the place of delivery. Participant reserves the right to reject and refuse acceptance of Transit Buses that are not in accordance with this Master Contract and the Participant’s Purchase Order during this inspection period. Representatives of Contractor may witness acceptance inspections DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 11
and testing if so requested by Contractor. Participant retains the right to complete as thorough an inspection as it deems necessary to determine if each bus is in conformance with Master Contract and Purchase Orders requirements for configuration and performance parameters.

Contractor shall coordinate and manage Contractor’s post-delivery inspection process and notify the Participant of scheduling and availability of buses ready for pre-acceptance inspection.

Acceptance by the Participant occurs when Participant provides Contractor with a written Notice of Acceptance, which will be subsequent to final inspection by responsible assigned employees of the Participant. All acceptances are subject to the warranty requirements of this Master Contract.

5.10. INSPECTION DEFECTS. If there are any apparent defects in the goods and/or services within the inspection period, Participant will promptly notify Contractor. At Participant’s option, and without limiting any other rights, Participant may:
ƒ Require Contractor to repair or replace, at Contractor’s expense, any or all of the damaged goods; or
ƒ Require Contractor to refund the price of any or all of the damaged goods; or ƒ Participant may note any damage to the goods on the receiving report, decline acceptance, and deduct the cost of rejected goods from final payment.

Payment for any goods under such Purchase Order shall not be deemed acceptance of the goods.

If Participant discovers defects during the inspection process, the requirement for timely delivery under 6.2(a) will continue to run until Contractor resolves the defects and provides Participant with the applicable goods free of defects. The period for the delivery date for the goods will be tolled for the length of time Participant was in the inspection period until the time that Participant provided notice of defect to Contractor.

5.11. POST-INSPECTION REPAIRS BY CONTRACTOR. In the event of non-acceptance of the bus, Contractor must begin Work within five (5) working days after receiving notification from Participant of failure of acceptance tests. Participant shall make the bus available to complete repairs timely with the Contractor repair schedule. If Contractor fails or refuses to begin the repairs within five (5) days, then the repair work may be done by Participant’s personnel with reimbursement by Contractor. Contractor shall provide, at its own expense, all spare parts, tools and space required to complete the repairs. At Participant’s option, Contractor may be required to remove the bus from Participant’s property while repairs are being made. If the bus is removed from Participant’s property, then repair procedures must be diligently pursued by Contractor’s representatives, and Contractor shall assume risk of loss while the bus is under its control.

5.12. CONTRACTOR SERVICE AND PARTS SUPPORT. For each Participant Order, Contractor shall supply Participant with a completed Exhibit D - Contractor Service and Parts Support Data with contact information on the representatives responsible for assisting Participant, as well as the location of the nearest distribution center, which shall furnish a complete supply of parts and components for the repair and maintenance of the buses to be supplied. Contractor shall also submit its policy on transportation charges for parts other than those covered by warranty.

5.13. PARTS AVAILABILITY GUARANTEE. Contractor guarantees to provide the spare parts, software, and all equipment necessary to maintain and repair the buses supplied under this Master Contract for a period of at least twelve (12) years after the date of acceptance. Parts will be interchangeable with the original equipment and will be manufactured in accordance with the quality assurance DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 12
provisions of this Master Contract. Prices shall not exceed the Contractor’s then-current published catalog prices.

Where the parts ordered by the Participant are not received within two (2) working days of the agreed-upon time and date and a bus procured under this Master Contract is out of service due to the lack of said ordered parts, then the Contractor shall provide the Participant, within eight (8) hours of the Participant’s verbal or written request, the original suppliers’ and/or manufacturers’ parts numbers, company names, addresses, telephone numbers and contact persons’ names for all of the specific parts not received by the Participant.

In the event Contractor fails to honor this parts guarantee or parts ordered by the Participant are not received within thirty (30) days of the agreed-upon delivery date, then Contractor shall provide to Participant, within seven (7) days of the Agency’s verbal or written request, the design and manufacturing documentation for those parts manufactured by the Contractor and the original suppliers’ and/or manufacturers’ parts numbers, company names, addresses, telephone numbers and contact persons’ names for all of the specific parts not received by the Participant.

Contractor’s design and manufacturing documentation provided to the Participant shall be for its sole use in regard to the buses procured under this Master Contract and for no other purpose.

5.14. TERMINATION FOR WITHDRAWAL OF FUNDING. If any Participant’s expected or actual funding for purchases under this Master Contract are withdrawn, reduced, or limited in any way prior to the payment for the last bus accepted, Participant may, upon written notice to Contractor, terminate their Purchase Order for Transit Buses not yet accepted. If the Purchase Order is terminated as provided in this subsection: (1) Participant will be liable only for payment in accordance with the terms of this Contract for work performed satisfactorily up to the date of termination and materials on order that cannot be canceled; and (2) Contractor shall be released from any obligation to provide additional buses as are affected by the termination.

5.15. FACILITY INSPECTIONS. Contractor shall provide right of access to its facilities to Enterprise Services, any Enterprise Services agents, Participant, any of Participants agents, or to any other authorized agent or official of the state of Washington or the federal government, at all reasonable times, in order to monitor and evaluate performance, compliance, and/or quality assurance under this Contract.

5.16. ON SITE REQUIREMENTS. While on Participant’s premises, Contractor, its agents, employees, or subcontractors shall comply, in all respects, with Participant’s physical, fire, access, safety, or other security requirements.

6. INVOICING & PAYMENT.

6.1. CONTRACTOR INVOICE. Contractor shall submit to Participant’s designated invoicing contact properly itemized invoices. Such invoices shall itemize the following:
(a) Master Contract No. 06719
(b) Contractor name, address, telephone number, and email address for billing issues (i.e., Contractor Customer Service Representative)
(c) Contractor’s Federal Tax Identification Number
(d) Date(s) of delivery
(e) Invoice amount; and
(f) Payment terms, including any available prompt payment discounts.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 13
Contractor’s invoices for payment shall reflect accurate Master Contract prices. Invoices will not be processed for payment until receipt of a complete invoice as specified herein.

6.2. PAYMENT. Payment is the sole responsibility of, and will be made by, the Participant. Payment is due within thirty (30) days of invoice. If Participant fails to make timely payment(s), Contractor may invoice Participant in the amount of one percent (1%) per month on the amount overdue or a minimum of $1. Payment will not be considered late if a check or warrant is mailed within the time specified. Contractor provides a prompt payment discount of 0.10% for payments within 20 days of receipt of the invoice. This discount will only be provided for Participant payments within the stated time.

6.3. MILESTONE PAYMENTS. Participant and Contractor may condition payment on the achievement of various agreed upon milestones for the Transit Buses. Milestone payments will be mutually agreed upon by Participant and Contractor in regard to timing of milestone, acceptance of milestone, and amounts for milestone payments. Payment for milestones will follow the procedure for invoice payment.

6.4. OVERPAYMENTS. Contractor promptly shall refund to Participant the full amount of any erroneous payment or overpayment. Such refunds shall occur within thirty (30) days of written notice to Contractor; Provided, however, that Participant shall have the right to elect to have either direct payments or written credit memos issued. If Contractor fails to make timely payment(s) or issuance of such credit memos, Participant may impose a one percent (1%) per month on the amount overdue thirty (30) days after notice to the Contractor.

6.5. NO ADVANCE PAYMENT. No advance payments shall be made for any goods or services furnished by Contractor pursuant to this Master Contract.

6.6. NO ADDITIONAL CHARGES. Unless otherwise specified herein, Contractor shall not include or impose any additional charges including, but not limited to, charges for shipping, handling, or payment processing.

6.7. TAXES/FEES. Contractor promptly shall pay all applicable taxes on its operations and activities pertaining to this Master Contract. Failure to do so shall constitute breach of this Master Contract. Unless otherwise agreed, Participant shall pay applicable sales tax imposed by the tax jurisdictions in which delivery occurs on purchased goods and/or services. Contractor, however, shall not make any charge for federal excise taxes and Participant agrees to furnish Contractor with an exemption certificate where appropriate.

7. CONTRACT MANAGEMENT.

7.1. CONTRACT ADMINISTRATION & NOTICES. Except for legal notices, the parties hereby designate the following contract administrators as the respective single points of contact for purposes of this Master Contract. Enterprise Services’ contract administrator shall provide Master Contract oversight. Contractor’s contract administrator shall be Contractor’s principal contact for business activities under this Master Contract. The parties may change contractor administrators by written notice as set forth below.

Any notices required or desired shall be in writing and sent by U.S. mail, postage prepaid, or sent via email, and shall be sent to the respective addressee at the respective address or email address set forth below or to such other address or email address as the parties may specify in writing:

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 14
Enterprise Services Contractor
Attn: David Mgebroff
Washington Dept. of Enterprise Services
PO Box 41411
Olympia, WA 98504-1411
Tel: (360) 407-8049
Email: [email protected]
Attn: Lee Petersen, Regional Sales Manager
and Maribel Gonzalez-Becerra, Bid & Contract
Specialist

GILLIG LLC
451 Discovery Drive
Livermore, CA 94551
Tel: (800) 785-1500
Email: [email protected]
Notices shall be deemed effective upon the earlier of receipt, if mailed, or, if emailed, upon transmission to the designated email address of said addressee.

7.2. CONTRACTOR CUSTOMER SERVICE REPRESENTATIVE. Contractor shall designate a customer service representative (and inform Enterprise Services of the same) who shall be responsible for addressing Participant issues pertaining to this Master Contract.

7.3. LEGAL NOTICES. Any legal notices required or desired shall be in writing and delivered by U.S. certified mail, return receipt requested, postage prepaid, or sent via email, and shall be sent to the respective addressee at the respective address or email address set forth below or to such other address or email address as the parties may specify in writing:

Enterprise Services Contractor
Attn: Legal Services Manager
Washington Dept. of Enterprise Services
PO Box 41411
Olympia, WA 98504-1411
Email: [email protected]
Attn: William F. Fay, Jr.

Vice President Sales

GILLIG LLC
451 Discovery Drive
Livermore, CA 94551
Email: [email protected]
Notices shall be deemed effective upon the earlier of receipt when delivered, or, if mailed, upon return receipt, or, if emailed, upon transmission to the designated email address of said addressee.

8. CONTRACTOR SALES REPORTING; VENDOR MANAGEMENT FEE; & CONTRACTOR REPORTS.

8.1. MASTER CONTRACT SALES REPORTING. Contractor shall report total Master Contract sales quarterly to Enterprise Services, as set forth below.
(a) Master Contract Sales Reporting System. Contractor shall report quarterly Master Contract sales in Enterprise Services’ Master Contract Sales Reporting System.

Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. (b) Data. Each sales report must identify every authorized Participant by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized Participants specified herein during the term of the DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 15
Master Contract. If there are no Master Contract sales during the reporting period, Contractor must report zero sales.
(c) Due dates for Master Contract Sales Reporting. Quarterly Master Contract Sales Reports must be submitted electronically by the following deadlines for all sales invoiced during the applicable calendar quarter:

FOR CALENDAR QUARTER ENDING

MASTER CONTRACT

SALES REPORT DUE
March 31: April 30
June 30: July 31
September 30: October 31
December 31: January 31

8.2. VENDOR MANAGEMENT FEE. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 0.15 percent on the purchase price for all Master Contract sales (the purchase price is the total invoice price less applicable sales tax).
(a) The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows:

Amount owed to Enterprise Services = Total Master Contract sales invoiced (not including sales tax) x .00150.
(b) The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services.
(c) Enterprise Services will invoice Contractor quarterly based on Master Contract sales reported by Contractor. Contractors are not to remit payment until they receive an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Master Contract number, work request number (if applicable), the year and quarter for which the VMF is being remitted, and the Contractor’s name as set forth in this Master Contract, if not already included on the face of the check. (d) Failure to accurately report total net sales, to submit a timely usage report, or remit timely payment of the VMF, may be cause for Master Contract suspension or termination or the exercise of other remedies provided by law. Without limiting any other available remedies, the Parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sum, the sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less.
(e) Enterprise Services reserves the right, upon thirty (30) days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 16

8.3. ANNUAL MASTER CONTRACT SALES REPORT. Contractor shall provide to Enterprise Services a detailed annual Master Contract sales report. Such report shall include, at a minimum: Product description, part number or other Product identifier, per unit quantities sold, and Master Contract price. This report must be provided in an electronic format that can be read by MS Excel.

9. RECORDS RETENTION & AUDITS.

9.1. RECORDS RETENTION. Contractor shall maintain books, records, documents, and other evidence pertaining to this Master Contract and orders placed by Participants under it to the extent and in such detail as shall adequately reflect performance and administration of payments and fees.

Contractor shall retain such records for a period of six (6) years following expiration or termination of this Master Contract or final payment for any order placed by a Participant against this Master Contract, whichever is later; Provided, however, that if any litigation, claim, or audit is commenced prior to the expiration of this period, such period shall extend until all such litigation, claims, or audits have been resolved.

9.2. AUDIT. Enterprise Services reserves the right to audit, or have a designated third party audit, applicable records to ensure that Contractor has properly invoiced Participants and that Contractor has paid all applicable contract management fees. Accordingly, Contractor shall permit Enterprise Services, any Participant, and any other duly authorized agent of a governmental agency, to audit, inspect, examine, copy and/or transcribe Contractor’s books, documents, papers and records directly pertinent to this Master Contract or orders placed by a Participant under it for the purpose of making audits, examinations, excerpts, and transcriptions.

This right shall survive for a period of six (6) years following expiration or termination of this Master Contract or final payment for any order placed by a Participant against this Master Contract, whichever is later; Provided, however, that if any litigation, claim, or audit is commenced prior to the expiration of this period, such period shall extend until all such litigation, claims, or audits have been resolved.

9.3. OVERPAYMENT OF PURCHASES OR UNDERPAYMENT OF FEES. Without limiting any other remedy available to any Participant, Contractor shall (a) reimburse Participants for any overpayments inconsistent with the terms of this Master Contract or orders, at a rate of 125% of such overpayments, found as a result of the examination of the Contractor’s records; and (b) reimburse Enterprise Services for any underpayment of fees, at a rate of 125% of such fees found as a result of the examination of the Contractor’s records (e.g., if Contractor underpays the Vendor Management Fee by $500, Contractor would be required to pay to Enterprise Services $500 x 1.25 = $625).

10. INSURANCE.

10.1. REQUIRED INSURANCE. During the Term of this Master Contract, Contractor, at its expense, shall maintain in full force and effect the insurance coverages set forth in Exhibit C – Insurance Requirements. All costs for insurance, including any payments of deductible amounts, shall be considered incidental to and included in the prices for goods/services and no additional payment shall be made.

10.2. WORKERS COMPENSATION. Contractor shall comply with applicable workers compensation statutes and regulations (e.g., RCW Title 51, Industrial Insurance). If Contractor fails to provide industrial insurance coverage or fails to pay premiums or penalties on behalf of its employees as may be required by law, Enterprise Services may terminate this Master Contract. This provision does not waive any of the Washington State Department of Labor and Industries (L&I) rights to collect DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 17
from Contractor. In addition, Contractor waives its immunity under RCW Title 51 to the extent it is required to indemnify, defend, and hold harmless the State of Washington and its agencies, officials, agents, or employees.

11. WARRANTY.

11.1. CONTRACTOR WARRANTY. Warranties in this document are in addition to any statutory remedies or warranties imposed on Contractor. Consistent with this requirement, Contractor warrants and guarantees to Participant each complete Transit Bus and specific subsystems and components as follows.

Contractor warrants the Transit Buses are of good material and workmanship and agrees to promptly replace any part or parts, at no cost to the Participant, which by reason of defective materials or workmanship fail under normal use, free of negligence or accident during the applicable warranty period. Contractor warranties include the replacement of parts and services associated with the replacement and repair, including but not limited to any diagnostic, refurbishment, shipping, or travel costs.

Performance requirements based on design criteria will not be deemed a warranty item.

Contractor shall insure in its procurement arrangements that the warranty requirements of this Master Contract are enforceable through and against the Contractor's suppliers, vendors, material men, and subcontractors. Any inconsistency or difference between the warranties extended to Participants by Contractor and those extended to Contractor by its suppliers, vendors, material men, and subcontractors, are at the risk and expense of Contractor. Such inconsistency or difference will not excuse Contractor's full compliance with its obligations under this Contract.

11.2. WARRANTY INFORMATION. Upon Participant’s request, Contractor promptly shall provide complete copies of all written warranties or guarantees and documentation of any other arrangement relating to such warranties or guarantees extended by Contractor's suppliers, sub-suppliers, vendors, material men, and subcontractors covering parts, components, and systems utilized in the bus. Contractor shall ensure that such suppliers, sub-suppliers, vendors, material men, and subcontractors satisfactorily perform warranty related work when requested to do so by Participant.

11.3. SYSTEM WARRANTIES. The following systems are warranted to be free from defects and related defects for the years and mileage listed in the table below, whichever comes first. Each warranty is based on regular operation of the bus under the operating conditions prevailing in Participant’s locale.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 18
Warranty Description Years/Mileage
Complete Bus Complete bus, propulsion system,
components, major subsystems, and
body and chassis structure
2 years, 100,000 miles;
Class 1 or 2 Failures: 12
years, 500,000 miles
Body And Chassis
Structure
Body, body structure, structural elements
of the suspension and engine cradle
3 years, 150,000 miles
Body and Chassis
Corrosion Failure or
Fatigue Failure
Primary load-carrying members of the
bus structure, including structural
elements of the suspension
Class 1 or 2 Failures: 12
years, 500,000 miles
Propulsion System
(Diesel, CNG, Hybrid)
engine, transmission or drive motors, and
generators (for hybrid technology) and
drive and non-drive axles
2 years, 100,000 miles
Propulsion System
(Electric)
traction motors, traction motor
controllers, transmission, drive motors,
drive and non-drive axles, and any other
propulsion system-related replacement
component
3 years, 100,000 miles
Energy Storage
System
traction battery, Battery Management
System, and any other ESS-related
replacement component
6 years, 300,000 miles
Emission Control
System
complete exhaust system, including
catalytic converter (if required), after
treatment device, components identified
as emission control devices
5 years, 100,000 miles
The ESS is warranted to remain within warrantable end of life during the warranty period. The ESS original specified energy storage capacity and warrantable end of life, as a percentage of the original specified energy capacity, must be clearly defined by the Contractor. Acceptable methods for measuring or obtaining ESS storage capacity with respect to its original specified capacity must be clearly identified by the manufacturer. The manufacturer will propose the test method, and certify the results are true and accurate. The test will be performed according to a documented test procedure. Participant may engage third-parties for capacity testing.

11.4. SUBSYSTEMS WARRANTY. The Contractor warrants the following subsystems to be free from defects and related defects for at least two years or 100,000 miles, whichever comes first. ƒ Brake system: Foundation brake components, including advancing mechanisms, as supplied with the axles, excluding friction surfaces.
ƒ Destination signs: All destination sign equipment for the front, side and rear signs, power modules and operator control.
ƒ Heating, ventilating: Roof and/or rear main unit only, excluding floor heaters and front defroster.
ƒ AC unit and compressor: Roof and/or rear main unit only, excluding floor heaters and front defroster.
ƒ Door systems: Door operating actuators and linkages. ** Warranty of One Year/Unlimited Miles
ƒ Air compressor.
ƒ Air dryer. ** Warranty of One Year/Unlimited Miles
ƒ Wheelchair lift and ramp system: Lift and/or ramp parts and mechanical only.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 19
ƒ Starter.
ƒ Alternator: Alternator only. Does not include the drive system. ƒ Charge air cooler: Charge air cooler including core, tanks and including related surrounding framework and fittings.
ƒ Fire suppression: Fire suppression system including tank and extinguishing agent dispensing system.
ƒ Hydraulic systems: Including radiator fan drive and power steering as applicable. ƒ Propulsion cooling systems: Radiator including core, tanks and related framework, including surge tank. Transmission cooler.
ƒ Power electronics: DC/DC converters, inverters, if supplied ƒ Passenger seating excluding upholstery.
ƒ Fuel storage and delivery system.
ƒ Surveillance system including cameras and video recorders.

Contractor warrants the following subsystems to be free from defects and related defects for at least two years or 100,000 miles, whichever comes first:
ƒ Low voltage and high voltage electrical wiring and harnesses

11.5. SERIAL NUMBERS. Prior to final delivery of each bus, Contractor shall provide a complete electronic list of serialized units installed on each bus to facilitate warranty tracking. The list will include, but is not limited to the following:
ƒ Engine
ƒ Transmission or Traction Motor
ƒ Alternator
ƒ Starter
ƒ Destination/Luminator (Major
components)
ƒ Drive axle and non-drive axle(s)
ƒ DVR unit, supporting electronics
(Monitors)
ƒ Driver's seat
ƒ Battery equalizer
ƒ Radiator package
ƒ Exhaust emission components
ƒ A/C compressor and
condenser/evaporator unit
ƒ Power steering unit
ƒ Fuel cylinders (if applicable)
ƒ Air compressor
ƒ Wheelchair ramp (if applicable)
Contractor shall provide updated serial numbers resulting from warranty campaigns. The format of the list will be approved by Participant prior to delivery of the first production bus.

11.6. EXTENSION OF WARRANTY. If, during the warranty period, repairs or modifications on any bus are made necessary by defective design, materials, or workmanship but are not completed due to lack of material or inability to provide the proper repair for thirty (30) calendar days, then the applicable warranty period shall be extended by the number of days equal to the delay period.

11.7. VOIDING OF WARRANTY. The warranty will not apply to the failure of any part or component of the bus that directly results from misuse, negligence, accident, or repairs not conducted in accordance with the Contractor-provided maintenance manuals and with workmanship performed by adequately trained personnel in accordance with recognized standards of the industry. The warranty will be void if Participant fails to conduct normal inspections and scheduled preventive maintenance procedures as recommended in the Contractor’s maintenance manuals and if that omission caused the part or component failure. Participant should maintain documentation, auditable by Contractor, verifying service activities in conformance with the Contractor’s maintenance manuals.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 20

11.8. EXCEPTIONS AND ADDITIONS TO WARRANTY. Warranties will not apply to the following items:
ƒ scheduled maintenance items
ƒ normal wear-out items, such as brake linings, filters, belts, and wiper blades ƒ items furnished by Participant
Should Participant require the use of a specific product and has rejected Contractor’s request for an alternate product, then the standard supplier warranty for that product will be the only warranty provided to Participant. This product will not be eligible under “Fleet Defects,” below.

11.9. PASS-THROUGH/SUPERIOR WARRANTY. If any vendor to the Contractor offers, at no additional cost, a warranty on a component that is longer or more comprehensive than the required warranties on this Contract, Contractor shall inform Participant of the additional warranty and pass it through to Participant at no additional cost.

Contractor shall state in writing that Participant’s warranty reimbursements will not be impacted.

Contractor also shall state in writing any exceptions and reimbursement including all costs incurred in transport of vehicles and/or components. At any time during the warranty period, Contractor may request approval from Participant to assign its warranty obligations to others, but only on a case-by-case basis approved in writing by Participant. Otherwise, Contractor shall be solely responsible for the administration of the warranty as specified. Warranty administration by others does not eliminate the warranty liability and responsibility of Contractor.

11.10. FLEET DEFECTS. “Fleet Defect” means cumulative failures of twenty five (25%) percent of the same components in the same or similar application in a minimum fleet size of twelve (12) or more buses where such items are covered by warranty. A Fleet Defect applies only to the base warranty period in for Complete Bus, Propulsion System, and Subsystems Warranty. When a Fleet Defect is declared, the remaining warranty period on that item/component is suspended. The warranty period does not resume until the Fleet Defect is corrected.

For the purpose of Fleet Defects, each order shall be treated as a separate bus fleet. In addition, if there is a change in a major component within the order, the buses containing the new major component will become a separate bus fleet for the purposes of determining Fleet Defects.

Contractor shall correct a Fleet Defect under the warranty provisions defined in Section 13 Repair Procedure. After correcting the Fleet Defect, Participant and Contractor shall mutually agree to and Contractor shall promptly undertake and complete a work program reasonably designed to prevent the occurrence of the same Fleet Defect in all other buses and spare parts purchased under the order. Where the specific Fleet Defect is solely attributed to particular identifiable parts, the work program will include redesign and/or replacement of only the defectively designed and/or manufactured parts. In all other cases, the work program will include inspection and/or correction of all the buses in the fleet via a mutually agreed-to arrangement. Contractor shall update, as necessary, technical support information (parts, service and operator’s manuals) due to changes resulting from warranty repairs. Participant may immediately declare a defect in design resulting in a safety hazard to be a Fleet Defect. Contractor shall be responsible to furnish, install and replace all defective units.

The Fleet Defect warranty provisions do not apply to Participant-supplied items, such as radios, fare collection equipment, communication systems, and tires. In addition, Fleet Defects do not apply to interior and exterior finishes, hoses, fittings, and fabric.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 21

12. REPAIR PROCEDURE.

12.1. REPAIR PERFORMANCE. Contractor is responsible for all warranty-covered repair work, including diagnostics of warranty covered parts. To the extent practicable, Participant will allow Contractor or its designated representative to perform repair work. At its discretion, Participant may perform such repair work if it determines it needs to do so based on transit service or other requirements. Contractor shall reimburse Participant for any warranty-covered repair work it performs.

12.2. REPAIRS BY THE CONTRACTOR. Participant shall notify Contractor’s designated representative within thirty (30) days if Participant detects a defect within the warranty periods defined in this Master Contract or the applicable Participant Order. Contractor or its designated representative shall, if requested, begin repair work on warranty-covered repairs within five (5) calendar days after receiving notification of a defect from Participant. Participant will make the bus available to complete repairs timely with the Contractor’s repair schedule.

Contractor shall provide at its own expense all spare parts, tools, and space required to complete repairs. At Participant’s option, Contractor may be required to remove the bus from Participant’s property while repairs are made. If the bus is removed from Participant’s property, then repair procedures must be diligently pursued by Contractor’s representative.

12.3. REPAIRS BY PARTICIPANT. If Participant performs the warranty-covered repairs, then it must correct or repair the defect and any related defects utilizing parts supplied by Contractor specifically for this repair. At its discretion, Participant may use Contractor-specified parts available from its own stock if deemed in its best interests. Parts supplied by Contractor may be remanufactured but must have the same form, fit and function, and warranty. The parts will be shipped prepaid to Participant from any source selected by Contractor within fourteen (14) days of receipt of the request for said parts and shall not be subject to a handling charge.

12.4. DEFECTIVE COMPONENT RETURN. Contractor may request that parts covered by the warranty be returned to the manufacturing plant. Contractor will pay the freight costs for this action.

12.5. FAILURE ANALYSIS. Upon specific request of Participant, Contractor will provide a failure analysis of Fleet Defect or safety-related parts, or major components, removed from buses under the terms of the warranty that could affect fleet operation. Such reports will be delivered within 60 days of the receipt of failed parts.

12.6. REIMBURSEMENT FOR LABOR AND OTHER RELATED COSTS. Contractor shall reimburse Participant for repair labor. The amount is determined by Participant for a qualified mechanic at a straight time wage rate per hour, which includes fringe benefits and overhead adjusted for Participant’s most recently published rate in effect at the time the repair work is performed, plus the cost of towing the bus if such action was necessary and if the bus was in the normal service area. These wage and fringe benefit rates shall not exceed the rates in effect in Participant’s service garage at the time the defect correction is made.

12.7. REIMBURSEMENT FOR PARTS. Contractor shall reimburse Participant for defective parts and for parts that must be replaced to correct the defect. The reimbursement will be at the current price at the time of repair and include taxes where applicable, plus fifteen (15) percent handling costs.

Handling costs will not be paid if parts are supplied by Contractor and shipped to Participant.

12.8. REIMBURSEMENT REQUIREMENTS. Contractor shall respond to parts warranty claims with an accept/reject decision including necessary failure analysis no later than sixty (60) days after DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 22
Participant submits the claim and defective part(s), when requested. Reimbursement for all accepted claims shall occur no later than sixty (60) days from the date of acceptance of a valid claim. Participant may dispute rejected claims or claims for which Contractor did not reimburse the full amount. Contractor and Participant will review disputed warranty claims during the following quarter to reach an equitable decision to permit the disputed claim to be resolved and closed. Contractor and Participant will review all claims at least once per quarter throughout the entire warranty period to ensure that open claims are being tracked and properly dispositioned.

12.9. WARRANTY AFTER REPLACEMENT/REPAIRS. If any component, unit, or subsystem is repaired, rebuilt, or replaced by Contractor or by Participant with the concurrence of Contractor, then the component, unit, or subsystem will have the unexpired warranty period of the original. Repairs will not be warranted if Contractor-provided or authorized parts are not used for the repair, unless Contractor has failed to respond within five days, in accordance with Section 13.2 Repairs by the Contractor.

If an item is declared to be a Fleet Defect, then the warranty stops with the declaration of the Fleet Defect. Once the Fleet Defect is corrected, the items shall have three (3) months or the remaining time and/or miles of the original warranty, whichever is greater. This remaining warranty period will begin on the repair/replacement date for corrected items on each bus if the repairs are completed by Contractor or on the date Contractor provides all parts to Participant if repairs are completed by Participant.

12.10. WARRANTY PROCESSING PROCEDURES. The following list represents information required by Contractor from the Participant for processing warranty claims. One failure per bus per claim is allowed.
ƒ bus number and VIN
ƒ total vehicle life mileage at time of repair
ƒ date of failure/repair
ƒ acceptance/in-service date
ƒ Contractor part number and description
ƒ component serial number
ƒ description of failure
ƒ all costs associated with each failure/repair (invoices may be required for third-party costs):
o towing
o road calls
o labor
o materials
o parts
o handling
o troubleshooting time
The Participant’s forms will be accepted by Contractor if all of the above information is included.

Electronic submittal may be used if available between Contractor and Participant.

12.11. RETURN OF PARTS. When returning defective parts to Contractor, Participant will tag each part with the following:
ƒ bus number and VIN
ƒ claim number
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 23
ƒ part number
ƒ serial number (if available)

12.12. TIMEFRAME. Each claim must be submitted no more than thirty (30) days from the date of failure and/or repair, whichever is later. All defective parts must be returned to the Contractor, when requested, no more than forty-five (45) days from the date of repair.

13. QUALITY ASSURANCE

13.1. QUALITY ASSURANCE ORGANIZATION ESTABLISHMENT. Contractor shall establish and maintain an effective in-plant quality assurance organization.

13.2. QUALITY CONTROL. The quality assurance organization shall exercise quality control over all phases of production, from initiation of design through manufacture and preparation for delivery. The organization shall also control the quality of supplied articles.

13.3. AUTHORITY AND RESPONSIBILITY. The quality assurance organization shall have the authority and responsibility for reliability, quality control, inspection planning, establishment of the quality control system, and acceptance/rejection of materials and manufactured articles in the production of the transit buses.

13.4. MINIMUM FUNCTIONS. The quality assurance organization shall include the following minimum functions:
ƒ Work instructions: The quality assurance organization shall verify inspection operation instructions to ascertain that the manufactured product meets all prescribed requirements. ƒ Records maintenance: The quality assurance organization shall maintain and use records and data essential to the effective operation of its program. These records and data shall be available for review by the resident inspectors. Inspection and test records for this procurement shall be available for a minimum of one year after inspections and tests are completed.
ƒ Corrective action: The quality assurance organization shall detect and promptly ensure correction of any conditions that may result in the production of defective transit buses.

These conditions may occur in designs, purchases, manufacture, tests or operations that culminate in defective supplies, services, facilities, technical data or standards.

13.5. BASIC STANDARDS AND FACILITIES. The following standards and facilities shall be basic in the quality assurance process:
ƒ Configuration control: Contractor shall maintain drawings, assembly procedures and other documentation that completely describe a qualified bus that meets all of the options and special requirements of each Purchase Order. The quality assurance organization shall verify that each transit bus is manufactured in accordance with these controlled drawings, procedures and documentation.
ƒ Measuring and testing facilities: Contractor shall provide and maintain the necessary gauges and other measuring and testing devices for use by the quality assurance organization to verify that the buses conform to all specification requirements. These devices shall be calibrated at established periods against certified measurement standards that have known, valid relationships to national standards. ƒ Production tooling as media of inspection: When production jigs, fixtures, tooling masters, templates, patterns and other devices are used as media of inspection, they shall DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 24
be proved for accuracy at formally established intervals and adjusted, replaced or repaired as required to maintain quality.
ƒ Equipment use by resident inspectors: Contractor’s gauges and other measuring and testing devices shall be made available for use by the resident inspectors to verify that the buses conform to all specification requirements. If necessary, the Contractor’s personnel shall be made available to operate the devices and to verify their condition and accuracy.

13.6. MAINTENANCE OF CONTROL. Contractor shall maintain quality control of purchases:
ƒ Supplier control: Contractor shall require each supplier to maintain a quality control program for the services and supplies that it provides. Contractor’s quality assurance organization shall inspect and test materials provided by suppliers for conformance to specification requirements. Materials that have been inspected, tested and approved shall be identified as acceptable to the point of use in the manufacturing or assembly processes.

Controls shall be established to prevent inadvertent use of nonconforming materials. ƒ Purchasing data: Contractor shall verify that all applicable specification requirements are properly included or referenced in purchase orders of articles to be used on transit buses.

13.7. MANUFACTURING CONTROL. Contractor shall maintain quality control of production:
ƒ Controlled conditions: Contractor shall ensure that all basic production operations, as well as all other processing and fabricating, are performed under controlled conditions.

Establishment of these controlled conditions shall be based on the documented work instructions, adequate production equipment and special working environments if necessary.
ƒ Completed items: A system for final inspection and test of completed transit buses shall be provided by the quality assurance organization. It shall measure the overall quality of each completed bus.
ƒ Nonconforming materials: The quality assurance organization shall monitor the Contractor’s system for controlling nonconforming materials. The system shall include procedures for identification, segregation and disposition. ƒ Statistical techniques: Statistical analysis, tests and other quality control procedures may be used when appropriate in the quality assurance processes. ƒ Inspection status: A system shall be maintained by the quality assurance organization for identifying the inspection status of components and completed transit buses. Identification may include cards, tags or other normal quality control devices.

13.8. Inspection System. The quality assurance organization shall establish, maintain and periodically audit a fully documented inspection system. The system shall prescribe inspection and test of materials, Work in process and completed articles. At a minimum, it shall include the following controls:
ƒ Inspection personnel: Sufficient trained inspectors shall be used to ensure that all materials, components and assemblies are inspected for conformance with the qualified bus design.
ƒ Inspection records: Acceptance, rework or rejection identification shall be attached to inspected articles. Articles that have been accepted as a result of approved materials review actions shall be identified. Articles that have been reworked to specified drawing DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 25
configurations shall not require special identification. Articles rejected as unsuitable or scrap shall be plainly marked and controlled to prevent installation on the bus. Articles that become obsolete as a result of engineering changes or other actions shall be controlled to prevent unauthorized assembly or installation. Unusable articles shall be isolated and then scrapped. Discrepancies noted by the Contractor or resident inspectors during assembly shall be entered by the inspection personnel on a record that accompanies the major component, subassembly, assembly or bus from start of assembly through final inspection.

Actions shall be taken to correct discrepancies or deficiencies in the manufacturing processes, procedures or other conditions that cause articles to be in nonconformity with the requirements of the Contract specifications. The inspection personnel shall verify the corrective actions and mark the discrepancy record. If discrepancies cannot be corrected by replacing the nonconforming materials, then the Agency shall approve the modification, repair or method of correction to the extent that the Contract specifications are affected. ƒ Quality assurance audits: The quality assurance organization shall establish and maintain a quality control audit program. Records of this program shall be subject to review by the Agency.

14. CLAIMS.

14.1. ASSUMPTION OF RISKS; CLAIMS BETWEEN THE PARTIES. Contractor assumes sole responsibility and all risks of personal injury or property damage to itself and its employees, and agents in connection with its operations under this Master Contract. Neither Enterprise Services nor any Participant has made any representations regarding any factor affecting Contractor’s risks. Contractor shall pay for all damage to any Participant’s property resulting directly or indirectly from its acts or omissions under this Master Contract.

14.2. THIRD-PARTY CLAIMS; INDEMNITY. To the fullest extent permitted by law, Contractor shall defend, indemnify, and hold harmless Enterprise Services and any Participant and their employees and agents from and against all claims, demands, judgments, assessments, damages, penalties, fines, costs, liabilities or losses including, without limitation, sums paid in settlement of claims, attorneys’ fees, consultant fees, and expert fees (collectively “claims”) arising from any act or omission of Contractor or its successors, agents, and subcontractors under this Master Contract, except claims caused solely by Enterprise Services or any Participants’ negligence. Contractor shall take all steps needed to keep Participant’s property free of liens arising from Contractor’s activities, and promptly obtain or bond the release of any such liens that may be filed.

15. DISPUTE RESOLUTION.

15.1. DISPUTE PROCEDURE. The parties shall cooperate to resolve any dispute pertaining to this Master Contract efficiently, as timely as practicable, and at the lowest possible level with authority to resolve such dispute. If, however, a dispute persists and cannot be resolved, it may be escalated within each organization. In such situation, upon notice by either party, each party, within five (5) business days shall reduce its description of the dispute to writing and deliver it to the other party. The receiving party then shall have three (3) business days to review and respond in writing. In the event that the parties cannot then agree on a resolution of the dispute, the parties shall schedule a conference between the respective senior manager of each organization to attempt to resolve the dispute. In the event the parties cannot agree, either party may resort to court to resolve the dispute.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 26

15.2. PERFORMANCE DURING DISPUTE. Unless otherwise directed by Enterprise Services, Contractor shall continue performance under this Master Contract while matters in dispute are being resolved.

16. SUSPENSION & TERMINATION.

16.1. SUSPENSION & TERMINATION FOR DEFAULT. Enterprise Services may suspend Contractor’s operations under this Master Contract immediately by written cure notice of any default. In such case, the notice of suspension will state the time period in which cure is permitted and other appropriate conditions. Suspension shall continue until the default is remedied to Enterprise Services’ reasonable satisfaction; Provided, however, that, if after thirty (30) days from such a suspension notice, Contractor remains in default, Enterprise Services may terminate Contractor’s rights under this Master Contract. All of Contractor’s obligations to Enterprise Services and Participants survive termination of Contractor’s rights under this Master Contract, until such obligations have been fulfilled.

16.2. DEFAULT. Each of the following events shall constitute default of this Master Contract by Contractor:
(a) Contractor fails to perform or comply with any of the terms or conditions of this Master Contract including, but not limited to, Contractor’s obligation to pay vendor management fees when due;
(b) Contractor breaches any representation or warranty provided herein; or (c) Contractor enters into proceedings relating to bankruptcy, whether voluntary or involuntary.

16.3. REMEDIES FOR DEFAULT.
(a) Enterprise Services’ rights to suspend and terminate Contractor’s rights under this Master Contract are in addition to all other available remedies. (b) In the event of termination for default, Enterprise Services may exercise any remedy provided by law including, without limitation, the right to procure for all Participants replacement goods and/or services. In such event, Contractor shall be liable to Enterprise Services for damages as authorized by law including, but not limited to, any price difference between the Master Contract price and the replacement or cover price.

16.4. LIMITATION ON DAMAGES. Notwithstanding any provision to the contrary, the parties agree that in no event shall any party or Participant be liable to the other for exemplary or punitive damages.

16.5. GOVERNMENTAL TERMINATION.
(a) Termination for Withdrawal of Authority. Enterprise Services may suspend or terminate this Master Contract if, during the term hereof, Enterprise Services’ procurement authority is withdrawn, reduced, or limited such that Enterprise Services, in its judgment, would lack authority to enter into this Master Contract; Provided, however, that such suspension or termination for withdrawal of authority shall only be effective upon twenty (20) days prior written notice; and Provided further, that such suspension or termination for withdrawal of authority shall not relieve any Participant from payment for goods and/or services already ordered as of the effective date of such notice. Except as stated in this provision, in the event DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 27
of such suspension or termination for withdrawal of authority, neither Enterprise Services nor any Participant shall have any obligation or liability to Contractor. (b) TERMINATION FOR CHANGE OF AUTHORITY. Enterprise Services may suspend or terminate this Master Contract if, during the term hereof, federal procurement authority is withdrawn, reduced, or limited such that Enterprise Services, in its judgment, would lack authority to enter into this Master Contract as a State Cooperative Purchasing Schedule under applicable federal law; Provided, however, that such suspension or termination for withdrawal of authority shall only be effective upon twenty (20) days prior written notice; and Provided further, that such suspension or termination for withdrawal of authority shall not relieve any Participant from payment for goods and/or services already ordered as of the effective date of such notice. Except as stated in this provision, in the event of such suspension or termination for withdrawal of authority, neither Enterprise Services nor any Participant shall have any obligation or liability to Contractor.
(c) TERMINATION FOR PUBLIC CONVENIENCE. Enterprise Services, for public convenience, may terminate this Master Contract; Provided, however, that such termination for public convenience must, in Enterprise Services’ judgment, be in the best interest of the State of Washington; and Provided further, that such termination for public convenience shall only be effective upon sixty (60) days prior written notice; and Provided further, that such termination for public convenience shall not relieve any Participant from payment for goods and/or services already ordered as of the effective date of such notice. Except as stated in this provision, in the event of such termination for public convenience, neither Enterprise Services nor any Participant shall have any obligation or liability to Contractor.

16.6. TERMINATION PROCEDURE. Regardless of basis, in the event of suspension or termination (in full or in part), the parties shall cooperate to ensure an orderly and efficient suspension or termination.

Accordingly, Contractor shall deliver to Participants all goods and/or services that are complete (or with approval from Enterprise Services, substantially complete) and Participants shall inspect, accept, and pay for the same in accordance with this Master Contract and the applicable Purchase Order. Unless directed by Enterprise Services to the contrary, Contractor shall not process any orders after notice of suspension or termination inconsistent therewith.

17. FTA ROLE IN DISPUTES, BREACHES, DEFAULTS, OR OTHER LITIGATION.

17.1. FTA INTEREST. The U.S. Federal Transit Administration (“FTA”) has a vested interest in the settlement of any violation of federal law, regulation, or requirement, or any disagreement involving the award, this Master Contract, and any amendments thereto including, but not limited to, a default, breach, major dispute, or litigation. Accordingly, FTA shall have the right to concur in such any settlement or compromise.

17.2. NOTIFICATION TO FTA. If a current or prospective legal matter that may affect the Federal Government emerges, Enterprise Services and Participant promptly shall notify the FTA Chief Counsel, or FTA Regional Counsel for the Region in which Enterprise Services and Participant are located.

1. The types of legal matters that require notification include, but are not limited to, a major dispute, breach, default, litigation, or naming the Federal Government as a party to litigation or a legal disagreement in any forum for any reason.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 28

2. Matters that may affect the Federal Government include, but are not limited to, the Federal Government’s interests in the award, this Master Contract, and any amendments thereto, or the Federal Government’s administration or enforcement of federal laws, regulations, and requirements.

3. If Enterprise Services or Participant have credible evidence that a Principal, Official, Employee, Agent, or Third Party Participant of Enterprise Services or Participant, or other person has submitted a false claim under the False Claims Act, 31 U.S.C. § 3729 et seq., or has committed a criminal or civil violation of law pertaining to such matters as fraud, conflict of interest, bribery, gratuity, or similar misconduct involving federal assistance, Enterprise Services and Participant promptly shall notify the U.S. DOT Inspector General, in addition to the FTA Chief Counsel or Regional Counsel for the Region in which the Enterprise Services and Participant are located.

17.3. FEDERAL INTEREST IN RECOVERY. The Federal Government retains the right to a proportionate share of any proceeds recovered from any third party, based on the percentage of the federal share for this Master Contract.

18. GENERAL PROVISIONS.

18.1. TIME IS OF THE ESSENCE. Time is of the essence for each and every provision of this Master Contract.

18.2. COMPLIANCE WITH LAW. Contractor shall comply with all applicable law.

18.3. INTEGRATED AGREEMENT. This Master Contract constitutes the entire agreement and understanding of the parties with respect to the subject matter and supersedes all prior negotiations, representations, and understandings between them. There are no representations or understandings of any kind not set forth herein.

18.4. AMENDMENT OR MODIFICATION. Except as set forth herein, this Master Contract may not be amended or modified except in writing and signed by a duly authorized representative of each party.

18.5. AUTHORITY. Each party to this Master Contract, and each individual signing on behalf of each party, hereby represents and warrants to the other that it has full power and authority to enter into this Master Contract and that its execution, delivery, and performance of this Master Contract has been fully authorized and approved, and that no further approvals or consents are required to bind such party.

18.6. NO AGENCY. The parties agree that no agency, partnership, or joint venture of any kind shall be or is intended to be created by or under this Master Contract. Neither party is an agent of the other party nor authorized to obligate it.

18.7. ASSIGNMENT. Contractor may not assign its rights under this Master Contract without Enterprise Services’ prior written consent and Enterprise Services may consider any attempted assignment without such consent to be void; Provided, however, that, if Contractor provides written notice to Enterprise Services within thirty (30) days, Contractor may assign its rights under this Master Contract in full to any parent, subsidiary, or affiliate of Contractor that controls or is controlled by or under common control with Contractor, is merged or consolidated with Contractor, or purchases a majority or controlling interest in the ownership or assets of Contractor. Unless otherwise agreed, Contractor guarantees prompt performance of all obligations under this Master Contract notwithstanding any prior assignment of its rights.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 29

18.8. BINDING EFFECT; SUCCESSORS & ASSIGNS. This Master Contract shall be binding upon and shall inure to the benefit of the parties hereto and their respective successors and assigns.

18.9. PUBLIC INFORMATION. This Master Contract and all related documents are subject to public disclosure as required by Washington’s Public Records Act, RCW chapter 42.56. The Purchase Order and all related documents are subject to the public disclosure requirements of the Participant’s jurisdiction.

18.10. ASSIGNMENT OF ANTITRUST RIGHTS REGARDING PURCHASED GOODS/SERVICES. Contractor irrevocably assigns to Enterprise Services, on behalf of the State of Washington, or any applicable Participant any claim for relief or cause of action which the Contractor now has or which may accrue to the Contractor in the future by reason of any violation of state or federal antitrust laws in connection with any Transit Buses provided in Washington for the purpose of carrying out the Contractor’s obligations under this Master Contract, including, at Enterprise Services' option, the right to control any such litigation on such claim for relief or cause of action.

18.11. FEDERAL FUNDS. To the extent that any Participant uses federal funds to purchase goods and/or services pursuant to this Master Contract, such Participant shall specify, with its order, any applicable requirement or certification that must be satisfied by Contractor at the time the order is placed or upon delivery.

18.12. SEVERABILITY. If any provision of this Master Contract is held to be invalid or unenforceable, such provision shall not affect or invalidate the remainder of this Master Contract, and to this end the provisions of this Master Contract are declared to be severable. If such invalidity becomes known or apparent to the parties, the parties agree to negotiate promptly in good faith in an attempt to amend such provision as nearly as possible to be consistent with the intent of this Master Contract.

18.13. WAIVER. Failure of either party to insist upon the strict performance of any of the terms and conditions hereof, or failure to exercise any rights or remedies provided herein or by law, or to notify the other party in the event of breach, shall not release the other party of any of its obligations under this Master Contract, nor shall any purported oral modification or rescission of this Master Contract by either party operate as a waiver of any of the terms hereof. No waiver by either party of any breach, default, or violation of any term, warranty, representation, contract, covenant, right, condition, or provision hereof shall constitute waiver of any subsequent breach, default, or violation of the same or other term, warranty, representation, contract, covenant, right, condition, or provision.

18.14. SURVIVAL. All representations, warranties, covenants, agreements, and indemnities set forth in or otherwise made pursuant to this Master Contract shall survive and remain in effect following the expiration or termination of this Master Contract, Provided, however, that nothing herein is intended to extend the survival beyond any applicable statute of limitations periods.

18.15. GOVERNING LAW. The validity, construction, performance, and enforcement of this Master Contract shall be governed by and construed in accordance with the laws of the State of Washington, without regard to its choice of law rules. The validity, construction, performance, and enforcement of Purchase Orders shall be governed by and construed in accordance with the laws of the Participant’s jurisdiction.

18.16. JURISDICTION & VENUE. In the event that any action is brought to enforce any provision of this Master Contract, the parties agree to exclusive jurisdiction in Thurston County Superior Court for the State of Washington and agree that in any such action venue shall lie exclusively at Olympia, DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 30
Washington. In the event that any action is brought to enforce any provision of a Purchase Order, the parties agree to submit to exclusive jurisdiction and venue in the Participant’s jurisdiction.

18.17. ATTORNEYS’ FEES. Should any legal action or proceeding be commenced by either party in order to enforce this Master Contract or any provision hereof, or in connection with any alleged dispute, breach, default, or misrepresentation in connection with any provision herein contained, the prevailing party shall be entitled to recover reasonable attorneys’ fees and costs incurred in connection with such action or proceeding, including costs of pursuing or defending any legal action, including, without limitation, any appeal, discovery, or negotiation and preparation of settlement arrangements, in addition to such other relief as may be granted.

18.18. FAIR CONSTRUCTION & INTERPRETATION. The provisions of this Master Contract shall be construed as a whole according to their common meaning and not strictly for or against any party and consistent with the provisions contained herein in order to achieve the objectives and purposes of this Master Contract. Each party hereto and its counsel has reviewed and revised this Master Contract and agrees that the normal rules of construction to the effect that any ambiguities are to be resolved against the drafting party shall not be construed in the interpretation of this Master Contract. Each term and provision of this Master Contract to be performed by either party shall be construed to be both a covenant and a condition.

18.19. FURTHER ASSURANCES. In addition to the actions specifically mentioned in this Master Contract, the parties and any applicable Participant shall each do whatever may reasonably be necessary to accomplish the transactions contemplated in this Master Contract including, without limitation, executing any additional documents reasonably necessary to effectuate the provisions and purposes of this Master Contract.

18.20. EXHIBITS. All exhibits referred to herein are deemed to be incorporated in this Master Contract in their entirety.

18.21. CAPTIONS &HEADINGS. The captions and headings in this Master Contract are for convenience only and are not intended to, and shall not be construed to, limit, enlarge, or affect the scope or intent of this Master Contract nor the meaning of any provisions hereof.

18.22. ELECTRONIC SIGNATURES. A signed copy of this Master Contract or any other ancillary agreement transmitted by facsimile, email, or other means of electronic transmission shall be deemed to have the same legal effect as delivery of an original executed copy of this Master Contract or such other ancillary agreement for all purposes.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 MASTER CONTRACT NO. 06719-01
PAGE 31

18.23. COUNTERPARTS. This Master Contract may be executed in any number of counterparts, each of which shall be deemed an original and all of which counterparts together shall constitute the same instrument which may be sufficiently evidenced by one counterpart. Execution of this Master Contract at different times and places by the parties shall not affect the validity thereof so long as all the parties hereto execute a counterpart of this Master Contract.

EXECUTED as of the date and year first above written.

STATE OF WASHINGTON
Department of Enterprise Services

GILLIG LLC
a California company
By: ___________________________
Elena McGrew
By: ___________________________
William F Fay, Jr.

Its: Enterprise Procurement Manager Its: Vice President Sales a company
____________________
illiam F Fay Jr
ment of Enterprise Services
______________________
Elena McGrew
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 EXHIBIT 4

WASHINGTON COOPERATIVE PURCHASE AGREEMNET

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 WASHINGTON STATE TRANSIT BUSES COOPERATIVE PURCHASING AGREEMENT PAGE 1 (Rev 2021-10-01)

COOPERATIVE PURCHASING AGREEMENT
FOR

TRANSIT BUSES
CONTRACT NO. 06719
This Cooperative Purchasing Agreement for Transit Buses (“Agreement”) is made and entered into by and between the State of Washington acting by and through the Department of Enterprise Services, a Washington State governmental agency (“Enterprise Services”) and the Santa Monica Department of Transportation, (“Authorized Purchasing Entity”) and is dated and effective as of January 25, 2023.

R E C I T A L S
A. Pursuant to Legislative authorization, Enterprise Services, on behalf of the State of Washington, is authorized to develop, solicit, and establish procurement solutions, including statewide contracts (‘Contract”), for goods and/or services to support Washington state agencies. See RCW 39.26.050(1). The Washington State Legislature also has authorized Enterprise Services to make these contracts available, pursuant to an agreement in which Enterprise Services ensures full cost recovery, to other local or federal government agencies or entities, public benefit nonprofit organizations, and any tribes located in the State of Washington. See RCW 39.26.050(1) & (2).

B. In addition, Enterprise Services is authorized “to participate in, sponsor, conduct, or administer a cooperative purchasing agreement.” See RCW 39.26.060(1).

C. Cooperative Purchasing Agreements provide an opportunity for Enterprise Services to meet the needs of its customers and, by designing and developing the Competitive Solicitation and resulting Contract to include the opportunity for cooperative utilization by Authorized Purchasing Entities through a Cooperative Purchasing Agreement, to meet the needs of similarly situated purchasing entities who collectively enable an innovative, cost-effective, and efficient procurement solution for awarded contractors and eligible purchasers.

D. The above-referenced Contract was competitively bid, evaluated, and awarded pursuant to the State of Washington’s procurement laws for goods/services. See RCW 39.26. The procurement and resulting Contracts were designed to create competition and awarded contractors for a variety of Transit Buses (contract categories).

E. The above-referenced Contract was designed to and meets Federal Transit Administration (“FTA”) requirements for a State Cooperative Purchasing Contract under the FAST Act Sec. 3019. See Pub.L. 114-94.

F. There are no pending protests or lawsuits pertaining to the procurement or award of the Contract.








 

 



 
 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 WASHINGTON STATE TRANSIT BUSES COOPERATIVE PURCHASING AGREEMENT PAGE 2 (Rev 2021-10-01)
G. Enterprise Services maintains procurement and contract records pertaining to the Contract including the Competitive Solicitation, Bid Tab, Bidder Profiles, and resulting Contracts. In addition, Enterprise Services Transit Buses website identifies the various awarded contractors.

H. The purpose of this Agreement is to enable the Authorized Purchasing Entity to utilize the above referenced Contract consistent with the terms thereof and the terms and conditions set forth herein.

A G R E E M E N T
NOW THEREFORE, in consideration of the mutual promises, covenants, and conditions set forth herein, the parties hereto hereby agree as follows:

1. TERM. Upon execution, this Cooperative Purchasing Agreement shall continue for the term of the applicable Contract, as amended or extended; Provided, however, that, upon written notice to Enterprise Services, Purchasing Entity may terminate its participation in this Cooperative Purchasing Agreement and its ability to utilize the above-referenced Contract.

2. AUTHORIZATION TO UTILIZE THE CONTRACT. Consistent with the terms and conditions of the Contract and Purchasing Entity’s applicable procurement law, Purchasing Entity is authorized to utilize the abovereferenced Contract as a procurement solution. The State of Washington makes no representation or warranty regarding Purchasing Entity’s governing law or whether the Contract is an appropriate procurement solution for Purchasing Entity.

3. CONTRACTOR CONSENT. Consistent with its applicable procurement authority, Purchasing Entity may propose and negotiate jurisdiction-specific terms with the applicable awarded Contractor to meet Purchasing Entity’s needs; Provided, however, that any such jurisdiction-specific modifications are subject to agreement with the applicable awarded Contractor. Under no circumstances, however, will Purchasing Entity’s jurisdiction-specific modifications change or modify the Contract obligations between the State of Washington and the applicable awarded Contractor. Upon execution of Purchasing Entity’s agreement with the applicable awarded Contractor, Purchasing Entity shall provide a copy of the same to Enterprise Services prior to making any purchases under the Contract.

4. VENDOR MANAGEMENT FEE. The Vendor Management Fee set forth in the Contract shall be paid by the applicable Contractor to Enterprise Services on all applicable purchases. In no event shall Purchasing Entity modify, waive, or terminate the Vendor Management Fee. Any such modification, waiver, or termination of the Vendor Management Fee shall be deemed a material breach of this Agreement and shall terminate the Agreement; and, in the event Purchasing Entity attempts to modify, waive, or terminate the Vendor Management Fee, Purchasing Entity shall, by such act, agree to notify Enterprise Services of the same and to pay to Enterprise Services, within thirty (30) days, the equivalent of the otherwise applicable Vendor Management Fee.

5. ACCURATE PURCHASES. Purchasing Entity shall make orders within the scope of the Contract. Any purchases outside of the scope of the Contract shall constitute a breach of this Agreement. IN the event of such breach, Enterprise Services may terminate this Agreement, including the authorization for any purchases by Purchasing Entity under the Contract. Purchasing Entity represents and warrants that it shall use reasonable, good faith efforts to assist the Contractor in obtaining and reporting to Enterprise Services accurate purchases under the Contract for purposes of the applicable Vendor Management Fee.








 

 



 
 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 WASHINGTON STATE TRANSIT BUSES COOPERATIVE PURCHASING AGREEMENT PAGE 3 (Rev 2021-10-01)

6. AGREEMENT MANAGEMENT; NOTICES; PURCHASING ENTITY CONTRACT ADMINISTRATOR. (a) AGREEMENT MANAGEMENT; NOTICES. The parties hereby designate the following contacts as the respective single points of contact for purposes of this Agreement. The parties may change such individuals by written notice as set forth below. Any notices required or desired shall be in writing and sent by U.S. mail, postage prepaid, or sent via email, and shall be sent to the respective addressee at the respective address or email address set forth below or to such other address or email address as the parties may specify in writing:

Enterprise Services Santa Monica Department of Transportation Attn: Bus Purchases
Department of Enterprise Services
PO Box 41411
Olympia, WA 98504-1411
Email: [email protected]
Attn: David Nanjo
1660 7th Street
Santa Monica, CA 90401
Tel: (310) 458-1975 ext. 2387
Email: [email protected]
Notices shall be deemed effective upon the earlier of receipt, if mailed, or, if emailed, upon transmission to the designated email address of said addressee. (b) PURCHASING ENTITY INFORMATION. Purchasing Entity hereby designates the following contract administrator as the single point of contact for business activities under this Agreement.

Purchasing Entity Information
Organization Name City of Santa Monica DOT
Tax Identification Number 95-6000790
State Business Identification Number
(Required for Non-Profit entities)
Contact Name for Contract Administrator David Nanjo
Title Transit Maintenance Administrator
Address 1660 7th Street
City, State, Zip Santa Monica, CA 90401
Phone Number (310) 458 – 1975 ext. 2387
Email Address [email protected]

7. COMMUNICATION. In the event Purchasing Entity becomes aware of a significant contract performance issue pertaining to the Contract that, in Purchasing Entity’s reasonable judgment, could adversely impact the State of Washington, Purchasing Entity shall communicate the same to Enterprise Services.

8. CONTRACTOR DISPUTES. Purchasing Entity is responsible for resolving any disputes between itself and the applicable Contract Contractor regarding its purchases. Purchasing Entity shall notify Enterprise Services of any material dispute between Purchasing Entity and the applicable Contract Contractor.

When appropriate, Enterprise Services may assist Purchasing Entity in resolving such disputes.

9. NO LIABILITY. Other than those obligations expressly set forth in this Agreement, including the right of the State of Washington to the Vendor Management Fee, the parties shall have no liability whatsoever to each other with regard to transactions arising out of this Agreement or the Contract. 







 

 



 
 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 WASHINGTON STATE TRANSIT BUSES COOPERATIVE PURCHASING AGREEMENT PAGE 4 (Rev 2021-10-01)

10. TAXES/FEES. Unless otherwise agreed with Contractor, Purchasing Entity shall pay applicable sales and use taxes imposed by the tax jurisdictions in which purchase delivery occurs. Contractor agrees not make any charge for federal excise taxes and Purchasing Entity shall furnish Contractor with an exemption certificate where appropriate.

11. SCOPE OF PARTICIPATION. Purchasing Entity shall provide Enterprise Services with Purchasing Entity’s estimates for purchases under the Contract. Purchasing Entity shall provide timely updates regarding such estimated purchases if there is a material change in such planned purchases. The purchasing estimates are for Enterprise Services’ planning purposes in managing and approving purchases on the Contract.

Category Estimated Purchases
Heavy Duty (15) 35’ Gillig Battery Electric Buses
Light/Medium Duty
Double Decker
Rebuilt
Refurbish
Repower

12. APPROVAL PROCESS. Purchasing Entity shall submit purchase information to Enterprise Services for approval of purchases under the Contract. Purchasing Entity shall provide necessary purchase information for each purchase including but not limited to, the final purchase order, the use of FTA funding, FTA grant number, and applicable Department of Transportation contact for approval.

Enterprise Services shall include the respective state Department of Transportation for purchasing using FTA funds which require state DOT approval.

13. GENERAL PROVISIONS
(a) ENTIRE AGREEMENT. This Agreement constitutes the entire agreement and understanding of the parties with respect to the subject matter and supersedes all prior negotiations and representations. There are no representations or understandings of any kind not set forth herein.
(b) AMENDMENT OR MODIFICATION. Except as set forth herein, this Agreement may not be amended or modified except in writing signed by a duly authorized representative of each party. (c) AUTHORITY. Each party to this Agreement, and each individual signing on behalf of each party, hereby represents and warrants to the other that it has full power and authority to enter into this Agreement and that its execution, delivery, and performance of this Agreement has been fully authorized and approved, and that no further approvals or consents are required to bind such party.
(d) ELECTRONIC SIGNATURES. An electronic signature or electronic record of this Agreement or any other ancillary agreement shall be deemed to have the same legal effect as delivery of an original executed copy of this Agreement or such other ancillary agreement for all purposes. 







 

 



 
 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 WASHINGTON STATE TRANSIT BUSES COOPERATIVE PURCHASING AGREEMENT PAGE 5 (Rev 2021-10-01)
(e) COUNTERPARTS. This Agreement may be executed in one or more counterparts, each of which shall be deemed an original, and all of which counterparts together shall constitute the same instrument which may be sufficiently evidenced by one counterpart. Execution of this Agreement at different times and places by the parties shall not affect the validity thereof so long as all the parties hereto execute a counterpart of this Agreement.

EXECUTED as of the date and year first above written.

TRANSIT BUSES COOPERATIVE

STATE OF WASHINGTON

DEPARTMENT OF ENTERPRISE SERVICES

CITY OF SANTA MONICA
By: _____________________________
Name:

Title:

By: _____________________________
Name: David White
Title: City Manager
Approved as to form:
_____________________________
Name: Douglas Sloan
Title : City Attorney
Attest: _____________________________
Name: Denise Anderson-Warren
Title : City Clerk
Return this Agreement to Enterprise Services at:
[email protected]








 

 



 







 






DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 EXHIBIT 5

PRODUCTION & DELIVERY SCHEDULE
The Production Schedule for up to fifteen (15) battery electric Low Floor 35-foot heavy duty transit buses shall be as follows:
x First article bus production – February 2025.
x First article bus delivery – March 2025
x BBB Acceptance testing of first article bus – Testing completed by May 2025 x Second through fifteenth - fourteen (14) Production buses – Production start May 2025 DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 EXHIBIT 6

FTA CLAUSES

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

FEDERAL TRANSIT ADMINISTRATION REQUIRED CLAUSES
It is the responsibility of the Bidder to ensure that all clauses applicable to the Work of the Agreement resultant from this Purchase Order are adhered to by the Contractor and its Sub-contractors when applicable.

Sec. Contract Clause Applicability to Type of Contract
1 Fly America Requirements When Transportation Paid By FTA Funds 2 Buy America Requirements Value > 100K for Construction, Goods, Rolling Stock 3 Charter Bus Requirements Operational Service
4 School Bus Requirements Operational Service
5 Cargo Preference Requirements Equipment/Material/Commodities Transported By Ocean
6 Seismic Safety Requirements New Construction/Additions 7 Special Department of Labor (DOL) Equal
Employment Clause
Value > 10K for Construction
8 Energy Conservation Requirements All
9 Clean Water Requirements Value > 100K
10 Bus Testing Rolling Stock Acquisition
11 Pre-Award and Post Delivery Audit
Requirements
Rolling Stock Acquisition
12 Lobbying All
13 Access to Records and Reports All
14 Federal Changes All
15 Bonding Requirements Construction > 100K
16 Clean Air Value > 100K
17 Recycled Products Value > 10K In Fiscal Year
18 Davis-Bacon and Copeland Anti-Kickback
Acts
Construction > $2000
19 Contract Work Hours and Safety Standards
Act
Construction > $2000, Rolling Stock, Operational >
$2,500
20 No Government Obligation to Third Parties All
21 Program Fraud and False or Fraudulent
Statements and Related Acts
All
22 Termination Value > 10K
23 Government-Wide Debarment and
Suspension (Non-procurement)
Value > 25K
24 Privacy Act All
25 Civil Rights Requirements All
26 ADA Access Requirements All
27 Breaches and Dispute Resolution Value > 100K
28 Patent and Rights in Data Research Projects Only
29 Transit Employee Protective Agreements Transit Operations 30 Disadvantaged Business Enterprise (DBE) All
31 Incorporation of FTA Terms All
32 Drug and Alcohol Testing Operational Service/Safety Sensitive 33 Transit Vehicle Manufacturer (TVM)
Certifications
Rolling Stock, All Vehicle Procurements
34 Metric Requirements Sealed Bid Procurements, Rolling Stock, Construction
35 Conformance with National ITS
Architecture
Contracts and Solicitations for ITS projects only
36 Corridor Preservation Right of Way Development
37 Veterans Employment Capital Projects
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

1. FLY AMERICA REQUIREMENTS
49 U.S.C. §40118
41 CFR Part 301-10.131 - 301-10.143
Applicability to Contracts: The Fly America requirements apply to the transportation of persons or property, by air, between a place in the U.S. and a place outside the U.S., or between places outside the U.S., when the FTA will participate in the costs of such air transportation. Transportation on a foreign air carrier is permissible when provided by a foreign air carrier under a code share agreement when the ticket identifies the U.S. air carrier's designator code and flight number. Transportation by a foreign air carrier is also permissible if there is a bilateral or multilateral air transportation agreement to which the U.S.

Government and a foreign government are parties and which the Federal DOT has determined meets the requirements of the Fly America Act.

Flow down Requirements: The Fly America requirements flow down from NCTD to first tier consultants, who are responsible for ensuring that lower tier consultants and sub-consultants are in compliance.

Fly America - The Consultant agrees to comply with 49 U.S.C. 40118 (the "Fly America" Act) in accordance with the General Services Administration's regulations at 41 CFR Part 301-10.131 - 301-10.143, which provide that recipients and sub-recipients of Federal funds and their consultants are required to use U.S.

Flag air carriers for U.S Government-financed international air travel and transportation of their personal effects or property, to the extent such service is available, unless travel by foreign air carrier is a matter of necessity, as defined by the Fly America Act. The Consultant shall submit, if a foreign air carrier was used, an appropriate certification or memorandum adequately explaining why service by a U.S. flag air carrier was not available or why it was necessary to use a foreign air carrier and shall, in any event, provide a certificate of compliance with the Fly America requirements. The Consultant agrees to include the requirements of this section in all subcontracts that may involve international air transportation.

2. BUY AMERICA REQUIREMENTS
49 U.S.C. 5323(j)
49 U.S.C. 5323(h)
49 CFR Part 661
Applicability to Contracts: The Buy America requirements apply to the following types of contracts:

Construction Contracts and Acquisition of Goods or Rolling Stock (valued at more than $100,000).

Flow down Requirements: The Buy America requirements flow down from NCTD to first tier Consultant, who are responsible for ensuring that lower tier consultants and sub-consultants are in compliance.

Buy America - The Consultant agrees to comply with 49 U.S.C. 5323(j) as amended by MAP-21, 49 U.S.C. 5323(h), 49 CFR Part 661, and FAST Act (Pub. L. 114-94) which provide that Federal funds may not be obligated unless steel, iron, and manufactured products used in FTA-funded projects are produced in the United States, unless a waiver has been granted by FTA or the product is subject to a general waiver.

General waivers are listed in 49 CFR 661.7 and was amended by Section 3011 of the FAST Act (Pub. L. 114-94). Separate requirements for rolling stock are set out at 5323(j)(2)(C) and 49 CFR 661.11. Rolling stock not subject to a general waiver must be manufactured in the United States and have a sixty percent (60%) domestic content for FY16 & FY17; sixty-five percent (65%) domestic content for FY18 & FY19; and seventy percent (70%) domestic content for FY20 & beyond.

General waivers for small purchases do not apply to Consultants equipment purchases when Consultant’s contract value exceeds $150,000 in value. Consultant must submit to NCTD the appropriate Buy America certification with all bids on FTA-funded contracts, except those subject to a general waiver. Bids or offers that are not accompanied by a completed Buy America certification must be rejected as non-responsive.

This requirement does not apply to lower tier sub-consultants.

EXCEPTION SPECIFIC TO THIS PROCUREMENT: NCTD is seeking Buy America compliant [bids/proposals] with this [RFP/IFB/RFQ]. However, NCTD holds a FTA Non-Availability Waiver that is applicable to this procurement. Accordingly, the inability to certify Buy America compliance on this procurement shall not result in the [bid/proposal] being deemed non-responsive. The requirement for the proposal to include a completed Buy America Certificate, however, is not waived by this exception.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

3. CHARTER BUS REQUIREMENTS
49 U.S.C. 5323(d)
49 CFR Part 604
Applicability to Contracts: The Charter Bus requirements apply to the following type of contract:

Operational Service Contracts.

Flow down Requirements: The Charter Bus requirements flow down from NCTD to first tier service Consultants.

Charter Service Operations - The consultant agrees to comply with 49 U.S.C. 5323(d) and 49 CFR Part 604, which provides that recipients and sub-recipients of FTA assistance are prohibited from providing charter service using federally funded equipment or facilities if there is at least one private charter operator willing and able to provide the service, except under one of the exceptions at 49 CFR 604.9. Any charter service provided under one of the exceptions must be "incidental," i.e., it must not interfere with or detract from the provision of mass transportation.

4. SCHOOL BUS REQUIREMENTS
49 U.S.C. 5323(F)
49 CFR Part 605
Applicability to Contracts: The School Bus requirements apply to the following type of contract:

Operational Service Contracts.

Flow down Requirements: The School Bus requirements flow down from NCTD to first tier service consultants.

School Bus Operations - Pursuant to 69 U.S.C. 5323(f) and 49 CFR Part 605, recipients and subrecipients of FTA assistance may not engage in school bus operations exclusively for the transportation of students and school personnel in competition with private school bus operators unless qualified under specified exemptions. When operating exclusive school bus service under an allowable exemption, recipients and sub-recipients may not use federally funded equipment, vehicles, or facilities.

5. CARGO PREFERENCE REQUIREMENTS
46 U.S.C. 55305
Applicability to Contracts: The Cargo Preference requirements apply to all contracts involving equipment, materials, or commodities which may be transported by ocean vessels.

Flow down Requirements: The Cargo Preference requirements apply to all subcontracts when the subcontract may be involved with the transport of equipment, material, or commodities by ocean vessel.

Cargo Preference - Use of United States-Flag Vessels - The contractor agrees: a. to use privately owned United States-Flag commercial vessels to ship at least 50 percent of the gross tonnage (computed separately for dry bulk carriers, dry cargo liners, and tankers) involved, whenever shipping any equipment, material, or commodities pursuant to the underlying contract to the extent such vessels are available at fair and reasonable rates for United States-Flag commercial vessels; b. to furnish within 20 working days following the date of loading for shipments originating within the United States or within 30 working days following the date of leading for shipments originating outside the United States, a legible copy of a rated, "on-board" commercial ocean bill-of -lading in English for each shipment of cargo described in the preceding paragraph to the Division of National Cargo, Office of Market Development, Maritime Administration, Washington, DC 20590 and to the FTA recipient (through the contractor in the case of a subcontractor's bill-of-lading.) c. to include these requirements in all subcontracts issued pursuant to this contract when the subcontract may involve the transport of equipment, material, or commodities by ocean vessel.

Cargoes Procured, Furnished, or Financed by the United States Government - (a) Definition.- In this section, the term “privately-owned commercial vessel of the United States” does not include a vessel that, after September 21, 1961, was built or rebuilt outside the United States or documented under the laws of a DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 foreign country, until the vessel has been documented under the laws of the United States for at least three (3) years.
(b) Minimum Tonnage.-When the United States Government procures, contracts for, or otherwise obtains for its own account, or furnishes to or for the account of a foreign country, organization, or persons without provision for reimbursement, any equipment, materials, or commodities, or provides financing in any way with Federal funds for the account of any persons unless otherwise exempted, within or without the United States, or advances funds or credits, or guarantees the convertibility of foreign currencies in connection with the furnishing or obtaining of the equipment, materials, or commodities, the appropriate agencies shall take steps necessary and practicable to ensure that at least fifty percent (50%) of the gross tonnage of the equipment, materials, or commodities (computed separately for dry bulk carriers, dry cargo liners, and tankers) which may be transported on ocean vessels is transported on privately-owned commercial vessels of the United States, to the extent those vessels are available at fair and reasonable rates for commercial vessels of the United States, in a manner that will ensure a fair and reasonable participation of commercial vessels of the United States in those cargoes by geographic areas. (c) Waivers.-The President, the Secretary of Defense, or Congress (by concurrent resolution or otherwise) may waive this section temporarily by-
(1) Declaring the existence of an emergency justifying a waiver; and (2) Notifying the appropriate agencies of the waiver.
(d) Programs of Other Agencies.-
(1) Each department or agency that has responsibility for a program under this section shall administer that program with respect to this section under regulations and guidance issued by the Secretary of Transportation. The Secretary, after consulting with the department or agency or organization or person involved, shall have the sole responsibility for determining if a program is subject to the requirements of this section.
(2) The Secretary-
(A) shall conduct an annual review of the administration of programs determined pursuant to paragraph (1) as subject to the requirements of this section;
(B) may direct agencies to require the transportation on United States-flagged vessels of cargo shipments not otherwise subject to this section in equivalent amounts to cargo determined to have been shipped on foreign carriers in violation of this section;
(C) may impose on any person that violates this section, or a regulation prescribed under this section, a civil penalty of not more than $25,000 for each violation willfully and knowingly committed, with each day of a continuing violation following the date of shipment to be a separate violation; and (D) may take other measures as appropriate under the Federal Acquisition Regulations issued pursuant to section 25(c)(1) 1 of the Office of Federal Procurement Policy Act (41 U.S.C. 421(c)(1) 2 or contract with respect to each violation.
(e) Security of Government-Impelled Cargo.-
(1) In order to ensure the safety of vessels and crewmembers transporting equipment, materials, or commodities under this section, the Secretary of Transportation shall direct each department or agency (except the Department of Defense), when responsible for the carriage of such equipment, materials, or commodities, to provide armed personnel aboard vessels of the United States carrying such equipment, materials, or commodities if the vessels are transiting high-risk waters. (2) The Secretary of Transportation shall direct each department or agency responsible to provide armed personnel under paragraph (1) to reimburse, subject to the availability of appropriations, the owners or operators of applicable vessels for the cost of providing armed personnel. (3) In this subsection, the term “high-risk waters” means waters so designated by the Commandant of the Coast Guard in the Port Security Advisory in effect on the date on which an applicable voyage begins.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 (Pub. L. 109–304, §8(c), Oct. 6, 2006, 120 Stat. 1642; Pub. L. 110–417, div. C, title XXXV, §3511(a), (b), Oct. 14, 2008, 122 Stat. 4769; Pub. L. 112–213, title V, §503, Dec. 20, 2012, 126 Stat. 1575.)

6. SEISMIC SAFETY REQUIREMENTS
42 U.S.C. 7701 et seq.
49 CFR Part 41
Applicability to Contracts: The Seismic Safety requirements apply only to contracts for the construction of new buildings or additions to existing buildings.

Flow down Requirements: The Seismic Safety requirements flow down from NCTD to first tier consultants to assure compliance, with the applicable building standards for Seismic Safety, including the work performed by all sub-consultants.

Seismic Safety - The consultant agrees that any new building or addition to an existing building will be designed and constructed in accordance with the standards for Seismic Safety required in Department of Transportation Seismic Safety Regulations 49 CFR Part 41 and will certify to compliance to the extent required by the regulation. The consultant also agrees to ensure that all work performed under this contract including work performed by a sub-consultant is in compliance with the standards required by the Seismic Safety Regulations and the certification of compliance issued on the project. The consultant will facilitate and follow Executive Order No. 12699, “Seismic Safety of Federal and Federally-Assisted or Regulated New Building Construction,” 42 U.S.C. 7704 note, except as the Federal Government determines otherwise in writing.

7. SPECIAL DOL EQUAL EMPLOYMENT CLAUSE
41 CFR Part 60
See Section 25 – Contract Clause Civil Rights Requirements

8. ENERGY CONSERVATION REQUIREMENTS
42 U.S.C. 6321 et seq.
49 CFR Part 622
Applicability to Contracts: The Energy Conservation requirements are applicable to all contracts.

Flow down Requirements: The Energy Conservation requirements extend to all third party consultants and their contracts at every tier and, sub-recipients and their sub-agreements at every tier.

Energy Conservation - The Consultant agrees to comply with mandatory standards and policies relating to energy efficiency which are contained in the State energy conservation plan issued in compliance with the Energy Policy and Conservation Act. The consultant agrees to perform an energy assessment for any building constructed, reconstructed, or modified with FTA funds required under FTA regulations, “Requirements for Energy Assessments,” 49 CFR part 622, subpart C.

9. CLEAN WATER REQUIREMENTS
33 U.S.C. 1251 - 1377
Applicability to Contracts: The Clean Water requirements apply to each contract and subcontract which exceeds $100,000.

Flow down Requirements: The Clean Water Act requirements flow down to NCTD third party consultants and their contracts at every tier, and sub-recipients and their sub-agreements at every tier.

Clean Water - (a) The consultant agrees to comply with all applicable standards, orders or regulations issued pursuant to the Clean Water Act, as amended, 33 U.S.C. 1251 – 1377 et seq. (b) The consultant agrees to report each violation to NCTD and understands and agrees that NCTD will, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office in compliance with the notice of violating facility provisions in section 508 of the Clean Water Act, as amended, 33 U.S.C. 1368
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 (c) The consultant agrees to protect underground sources of drinking water in compliance with the Safe Drinking Water Act of 1974, as amended, 42 U.S.C. 300f – 300j-6. (d) The consultant also agrees to include these requirements in each subcontract exceeding $100,000 financed in whole or in part with Federal assistance provided by FTA.

10. BUS TESTING
49 U.S.C. 5318(e)
49 U.S.C. 5323(c)
49 CFR Part 665
Applicability to Contracts: The Bus Testing requirements pertain only to the acquisition of Rolling Stock/Turnkey.

Flow down Requirements: The Bus Testing requirements should not flow down, except to the turnkey consultant as stated in the most current FTA Master Agreement.

Bus Testing - The Consultant [Manufacturer] agrees to comply with 49 U.S.C. 5323(c) and FTA’s implementing regulation at 49 CFR Part 665 and shall perform the following:
a) A manufacturer of a new bus model or a bus produced with a major change in components or configuration shall provide a copy of the final test report to the recipient at a point in the procurement process specified by the recipient which will be prior to the recipient's final acceptance of the first vehicle.
b) A manufacturer who releases a report under paragraph 1 above shall provide notice to the operator of the testing facility that the report is available to the public. c) If the manufacturer represents that the vehicle was previously tested, the vehicle being sold should have the identical configuration and major components as the vehicle in the test report, which must be provided to the recipient prior to recipient's final acceptance of the first vehicle. If the configuration or components are not identical, the manufacturer shall provide a description of the change and the manufacturer's basis for concluding that it is not a major change requiring additional testing. d) If the manufacturer represents that the vehicle is "grandfathered" (has been used in mass transit service in the United States before October 1, 1988, and is currently being produced without a major change in configuration or components), the manufacturer shall provide the name and address of the recipient of such a vehicle and the details of that vehicle's configuration and major components.

11. PRE-AWARD AND POST-DELIVERY AUDITS REQUIREMENTS
49 U.S.C. 5323
49 C.F.R. 661.12
49 CFR Part 663
Applicability to Contracts: These requirements apply only to the acquisition of Rolling Stock/Turnkey.

Flow down Requirements: These requirements should not flow down, except to the turnkey consultant as stated in Master Agreement
- Buy America certification is mandated under FTA regulation, "Pre-Award and Post-Delivery Audits of Rolling Stock Purchases," 49 C.F.R. 663.13.

A Buy America certification under this part shall be issued in addition to any certification which may be required by part 661 of this title. Nothing in this part precludes FTA from conducting a Buy America investigation under part 661 of this title “Pre-Award and Post-Delivery Audit Requirements” - The Consultant agrees to comply with "Buy America Requirements--Surface Transportation Assistance Act of 1982, as amended," 49 C.F.R. 661.12, but has been modified to include FTA's Buy America requirements codified at 49 U.S.C. A 5323(j).

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Pre-Award and Post-Delivery Audit Requirements - The Contractor agrees to comply with 49 U.S.C. § 5323(l) and FTA's implementing regulation at 49 C.F.R. Part 663 and to submit the following certifications:
(1) Buy America Requirements: The Consultant shall complete and submit a declaration certifying either compliance or noncompliance with Buy America. If the Firm certifies compliance with Buy America, it shall submit documentation which lists 1) component and subcomponent parts of the rolling stock to be purchased identified by manufacturer of the parts, their country of origin and costs; 2) The location of the final assembly point for the rolling stock, including a description of the activities that will take place at the final assembly point and the cost of final assembly.
(2) Solicitation Specification Requirements: The Consultant shall submit evidence that it will be capable of meeting the bid specifications.
(3) Federal Motor Vehicle Safety Standards (FMVSS): The Consultant shall submit a) manufacturer's FMVSS self-certification sticker information that the vehicle complies with relevant FMVSS or b) manufacturer's certified statement that the contracted buses will not be subject to FMVSS regulations.

12. LOBBYING
31 U.S.C. 1352
49 CFR Part 19
49 CFR Part 20
Applicability to Contracts: The Lobbying requirements apply to Construction/Architectural and Engineering/Acquisition of Rolling Stock/Professional Service Contract/Operational Service Contract/Turnkey contracts.

Flow Down Requirements The Lobbying requirements mandate the maximum flow down, pursuant to Byrd Anti-Lobbying Amendment, 31 U.S.C. § 1352(b)(5) and 49 C.F.R. Part 19, Appendix A, Section 7.

Byrd Anti-Lobbying Amendment, 31 U.S.C. 1352, as amended by the Lobbying Disclosure Act of 1995, P.L. 104-65 [to be codified at 2 U.S.C. § 1601, et seq.] - Consultants who apply or bid for an award of $100,000 or more shall file the certification required by 49 CFR part 20, "New Restrictions on Lobbying." Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of a Federal agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352. Each tier certifies to the tier above that it will not and has not taken any action involving the Project or the Underlying Agreement for the Project, including any award, extension, or modification. Each tier shall also disclose the name of any registrant under the Lobbying Disclosure Act of 1995 who has made lobbying contacts on its behalf with non-Federal funds with respect to that Federal contract, grant or award covered by 31 U.S.C. 1352. Such disclosures are forwarded from tier to tier up to NCTD.

13. ACCESS TO RECORDS AND REPORTS
49 U.S.C. 5325
18 CFR 18.36(i)
49 CFR 633.17
Applicability to Contracts: Reference Chart "Requirements for Access to Records and Reports by Type of Contracts", Item 6 of this Section.

Flow down Requirements FTA does not require the inclusion of these requirements in subcontracts.

Access to Records - The following access to records requirements apply to this Contract:
(1) The Consultant agrees to provide NCTD, the FTA Administrator, the Comptroller General of the United States or any of their authorized representatives access to any books, documents, papers and records of the Consultant which are directly pertinent to this contract for the purposes of making audits, examinations, excerpts and transcriptions. Consultant also agrees, pursuant to 49 C.F.R. 633.17 to provide the FTA Administrator or his authorized representatives including any PMO Consultant access to Consultant's DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 records and construction sites pertaining to a major capital project, defined at 49 U.S.C. 5302(a)1, which is receiving federal financial assistance through the programs described at 49 U.S.C. 5307, 5309 or 5311. (2) Where NCTD or a sub-grantee of NCTD in accordance with 49 U.S.C. 5325(a) enters into a contract for a capital project or improvement (defined at 49 U.S.C. 5302(a) 1) through other than competitive bidding, the Consultant shall make available records related to the contract to NCTD, the Secretary of Transportation and the Comptroller General or any authorized officer or employee of any of them for the purposes of conducting an audit and inspection.
(3) The Consultant agrees to permit any of the foregoing parties to reproduce by any means whatsoever or to copy excerpts and transcriptions as reasonably needed. (4) The Consultant agrees to maintain all books, records, accounts and reports required under this contract for a period of not less than three (3) years after the date of termination or expiration of this contract, except in the event of litigation or settlement of claims arising from the performance of this contract, in which case Consultant agrees to maintain same until NCTD, the FTA Administrator, the Comptroller General, or any of their duly authorized representatives, have disposed of all such litigation, appeals, claims or exceptions related thereto. Reference 49 CFR 18.39(i) (11).
(5) FTA does not require the inclusion of these requirements in subcontracts. (6) Requirements for Access to Records and Reports by Types of Contract Sources of Authority: 1 18 CFR 18.36 (i)

14. FEDERAL CHANGES
49 CFR Part 18
Applicability to Contracts: The Federal Changes requirement applies to all contracts.

Flow down Requirements: The Federal Changes requirement flows down appropriately to each applicable changed requirement.

Federal Changes - Consultant shall at all times comply with all applicable FTA regulations, policies, procedures and directives, including without limitation those listed directly or by reference in the Master Agreement between NCTD and FTA , as they may be amended or promulgated from time to time during the term of this contract. Consultant's failure to so comply shall constitute a material breach of this contract.

15. BONDING REQUIREMENTS
Contract
Characteristics
Operational
Service
Contract
Turnkey Construction Architectural
Engineering
Acquisition
of Rolling
Stock
Professional
Services
Non State
Grantees
a. Contracts
below SAT
($100,000)
b. Contracts
above $100,000/
Capital Projects
Yes1
Yes1
Those
imposed
on nonstate
Grantee
pass thru
to
Consultant
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 This section applies only to construction or facility improvement contracts exceeding $100,000.

16. CLEAN AIR
42 U.S.C. 7401 – 7601(q)
40 CFR 15.61
49 CFR Part 18
Applicability to Contracts: The Clean Air requirements apply to all contracts exceeding $100,000, including indefinite quantities where the amount is expected to exceed $100,000 in any year.

Flow down Requirements: The Clean Air requirements flow down to all subcontracts which exceed $100,000.

Clean Air - (1) The Consultant agrees to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act, as amended, 42 U.S.C. §§ 7401 – 7601(q) et seq . The Consultant agrees to report each violation to NCTD and understands and agrees that NCTD, in turn, report each violation as required to assure notification to FTA and the appropriate EPA Regional Office. (2) The Consultant also agrees to include these requirements in each subcontract exceeding $100,000 financed in whole or in part with Federal assistance provided by FTA.

17. RECYCLED PRODUCTS
42 U.S.C. 6962
40 CFR Part 247
Executive Order 12873
Applicability to Contracts: The Recycled Products requirements apply to all contracts for items designated by the EPA, when the Consultant procures $10,000 or more of one (1) of these items during the fiscal year, or has procured $10,000 or more of such items in the previous fiscal year, using Federal funds.

Flow down Requirements: These requirements flow down to all consultant and sub-consultant tiers.

Recovered Materials - The consultant agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247. The consultant agrees to comply with the U.S. Environmental Protection Agency (US EPA), “Comprehensive Procurement Guideline for Products Containing Recovered Materials,” 40 CFR part 247.

18. DAVIS-BACON AND COPELAND ANTI-KICKBACK ACTS
49 U.S.C. 5333
40 U.S.C. 3141 – 3144
40 U.S.C. 3146 – 3147
18 U.S.C. 874
40 U.S.C. 3145
Applicability to Contracts: The Davis-Bacon and Copeland Acts are codified at 40 USC 3141, et seq. and 18 USC 874. The Acts apply to grantee construction contracts and subcontracts that “at least partly are financed by a loan or grant from the Federal Government.” 40 USC 3145(a), 29 CFR 5.2(h), 49 CFR

18.36(i) (5). The Acts apply to any construction contract over $2,000. 40 USC 3142(a), 29 CFR 5.5(a). ‘Construction,’ for purposes of the Acts, includes “actual construction, alteration and/or repair, including painting and decorating.” 29 CFR 5.5(a). The requirements of both Acts are incorporated into a single clause (see 29 FR 3.11) enumerated at 29 CFR 5.5(a) and reproduced below.

Flow down Requirements: Applies to third party consultants and sub-consultants (1) Minimum wages - (i) All laborers and mechanics employed or working upon the site of the work (or under the United States Housing Act of 1937 or under the Housing Act of 1949 in the construction or development of the project), will be paid unconditionally and not less often than once a week, and without DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 subsequent deduction or rebate on any account (except such payroll deductions as are permitted by regulations issued by the Secretary of Labor under the Copeland Act (29 CFR part 3)), the full amount of wages and bona fide fringe benefits (or cash equivalents thereof) due at time of payment computed at rates not less than those contained in the wage determination of the Secretary of Labor which is attached hereto and made a part hereof, regardless of any contractual relationship which may be alleged to exist between the consultant and such laborers and mechanics.

Contributions made or costs reasonably anticipated for bona fide fringe benefits under section 1(b)(2) of the Davis-Bacon Act on behalf of laborers or mechanics are considered wages paid to such laborers or mechanics, subject to the provisions of paragraph (1)(iv) of this section; also, regular contributions made or costs incurred for more than a weekly period (but not less often than Monthly) under plans, funds, or programs which cover the particular weekly period, are deemed to be constructively made or incurred during such weekly period. Such laborers and mechanics shall be paid the appropriate wage rate and fringe benefits on the wage determination for the classification of work actually performed, without regard to skill, except as provided in 29 CFR Part 5.5(a)(4). Laborers or mechanics performing work in more than one (1) classification may be compensated at the rate specified for each classification for the time actually worked therein: Provided, that the employer's payroll records accurately set forth the time spent in each classification in which work is performed. The wage determination (including any additional classifications and wage rates conformed under paragraph (1)(ii) of this section) and the Davis-Bacon poster (WH-1321) shall be posted at all times by the consultant and its sub-consultants at the site of the work in a prominent and accessible place where it can be easily seen by the workers. (ii)(A) The Contracting Officer shall require that any class of laborers or mechanics, including helpers, which is not listed in the wage determination and which is to be employed under the contract shall be classified in conformance with the wage determination. The Contracting Officer shall approve an additional classification and wage rate and fringe benefits therefore only when the following criteria have been met:
(1) Except with respect to helpers as defined as 29 CFR 5.2(n) (4), the work to be performed by the classification requested is not performed by a classification in the wage determination; and (2) The classification is utilized in the area by the construction industry; and (3) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable relationship to the wage rates contained in the wage determination; and
(4) With respect to helpers as defined in 29 CFR 5.2(n) (4), such a classification prevails in the area in which the work is performed.
(B) If the consultant and the laborers and mechanics to be employed in the classification (if known), or their representatives, and the Contracting Officer agree on the classification and wage rate (including the amount designated for fringe benefits where appropriate), a report of the action taken shall be sent by the Contracting Officer to the Administrator of the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, Washington, DC 20210. The Administrator, or an authorized representative, will approve, modify, or disapprove every additional classification action within thirty (30) days of receipt and shall advise the Contracting Officer or will notify the Contracting Officer within the thirty (30) day period that additional time is necessary.
(C) In the event the consultant, the laborers or mechanics to be employed in the classification or their representatives, and the Contracting Officer do not agree on the proposed classification and wage rate (including the amount designated for fringe benefits, where appropriate), the Contracting Officer shall refer the questions, including the views of all interested parties and the recommendation of the Contracting Officer, to the Administrator for determination. The Administrator, or an authorized representative, will issue a determination within thirty (30) days of receipt and shall advise the Contracting Officer or will notify the Contracting Officer within the thirty (30) day period that additional time is necessary. (D) The wage rate (including fringe benefits where appropriate) determined pursuant to paragraphs (a)(1)(ii) (B) or (C) of this section, shall be paid to all workers performing work in the classification under this contract from the first day on which work is performed in the classification. (iii) Whenever the minimum wage rate prescribed in the contract for a class of laborers or mechanics includes a fringe benefit which is not expressed as an hourly rate, the consultant shall either pay the benefit DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 as stated in the wage determination or shall pay another bona fide fringe benefit or an hourly cash equivalent thereof.
(iv) If the consultant does not make payments to a trustee or other third person, the consultant may consider as part of the wages of any laborer or mechanic the amount of any costs reasonably anticipated in providing bona fide fringe benefits under a plan or program, Provided, That the Secretary of Labor has found, upon the written request of the consultant, that the applicable standards of the Davis-Bacon Act have been met.

The Secretary of Labor may require the consultant to set aside in a separate account assets for the meeting of obligations under the plan or program.
(v)(A) The Contracting Officer shall require that any class of laborers or mechanics which is not listed in the wage determination and which is to be employed under the contract shall be classified in conformance with the wage determination. The Contracting Officer shall approve an additional classification and wage rate and fringe benefits therefor only when the following criteria have been met:
(1) The work to be performed by the classification requested is not performed by a classification in the wage determination; and
(2) The classification is utilized in the area by the construction industry; and (3) The proposed wage rate, including any bona fide fringe benefits, bears a reasonable relationship to the wage rates contained in the wage determination.
(B) If the consultant and the laborers and mechanics to be employed in the classification (if known), or their representatives, and the Contracting Officer agree on the classification and wage rate (including the amount designated for fringe benefits where appropriate), a report of the action taken shall be sent by the Contracting Officer to the Administrator of the Wage and Hour Division, Employment Standards Administration, Washington, DC 20210. The Administrator, or an authorized representative, will approve, modify, or disapprove every additional classification action within thirty (30) days of receipt and so advise the Contracting Officer or will notify the Contracting Officer within the thirty (30) day period that additional time is necessary.
(C) In the event the consultant, the laborers or mechanics to be employed in the classification or their representatives, and the Contracting Officer do not agree on the proposed classification and wage rate (including the amount designated for fringe benefits, where appropriate), the Contracting Officer shall refer the questions, including the views of all interested parties and the recommendation of the Contracting Officer, to the Administrator for determination. The Administrator, or an authorized representative, will issue a determination with thirty (30) days of receipt and shall advise the Contracting Officer or will notify the Contracting Officer within the thirty (30) day period that additional time is necessary. (D) The wage rate (including fringe benefits where appropriate) determined pursuant to paragraphs (a)(1)(v) (B) or (C) of this section, shall be paid to all workers performing work in the classification under this contract from the first day on which work is performed in the classification. (2) Withholding - NCTD shall upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld from the consultant under this contract or any other Federal contract with the same prime consultant, or any other federally-assisted contract subject to Davis-Bacon prevailing wage requirements, which is held by the same prime consultant, so much of the accrued payments or advances as may be considered necessary to pay laborers and mechanics, including apprentices, trainees, and helpers, employed by the consultant or any sub-consultant the full amount of wages required by the contract. In the event of failure to pay any laborer or mechanic, including any apprentice, trainee, or helper, employed or working on the site of the work (or under the United States Housing Act of 1937 or under the Housing Act of 1949 in the construction or development of the project), all or part of the wages required by the contract, NCTD may, after written notice to the consultant, sponsor, applicant, or owner, take such action as may be necessary to cause the suspension of any further payment, advance, or guarantee of funds until such violations have ceased. (3) Payrolls and basic records - (i) Payrolls and basic records relating thereto shall be maintained by the consultant during the course of the work and preserved for a period of three (3) years thereafter for all laborers and mechanics working at the site of the work (or under the United States Housing Act of 1937, or under the Housing Act of 1949, in the construction or development of the project). Such records shall DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 contain the name, address, and social security number of each such worker, his or her correct classification, hourly rates of wages paid (including rates of contributions or costs anticipated for bona fide fringe benefits or cash equivalents thereof of the types described in section 1(b) (2) (B) of the Davis-Bacon Act), daily and weekly number of hours worked, deductions made and actual wages paid. Whenever the Secretary of Labor has found under 29 CFR 5.5(a)(1)(iv) that the wages of any laborer or mechanic include the amount of any costs reasonably anticipated in providing benefits under a plan or program described in section 1(b)(2)(B) of the Davis-Bacon Act, the consultant shall maintain records which show that the commitment to provide such benefits is enforceable, that the plan or program is financially responsible, and that the plan or program has been communicated in writing to the laborers or mechanics affected, and records which show the costs anticipated or the actual cost incurred in providing such benefits. Consultants employing apprentices or trainees under approved programs shall maintain written evidence of the registration of apprenticeship programs and certification of trainee programs, the registration of the apprentices and trainees, and the ratios and wage rates prescribed in the applicable programs. (ii)(A) The consultant shall submit weekly for each week in which any contract work is performed a copy of all payrolls to NCTD for transmission to the Federal Transit Administration. The payrolls submitted shall set out accurately and completely all of the information required to be maintained under section 5.5(a) (3) (i) of Regulations, 29 CFR part 5. This information may be submitted in any form desired. Optional Form WH-347 is available for this purpose and may be purchased from the Superintendent of Documents (Federal Stock Number 029-005-00014-1), U.S. Government Printing Office, Washington, DC 20402. The prime consultant is responsible for the submission of copies of payrolls by all sub-consultants. (B) Each payroll submitted shall be accompanied by a "Statement of Compliance," signed by the consultant or sub-consultant or his or her agent who pays or supervises the payment of the persons employed under the contract and shall certify the following:
(1) That the payroll for the payroll period contains the information required to be maintained under section

5.5(a) (3) (i) of Regulations, 29 CFR part 5 and that such information is correct and complete; (2) That each laborer or mechanic (including each helper, apprentice, and trainee) employed on the contract during the payroll period has been paid the full weekly wages earned, without rebate, either directly or indirectly, and that no deductions have been made either directly or indirectly from the full wages earned, other than permissible deductions as set forth in Regulations, 29 CFR part 3; (3) That each laborer or mechanic has been paid not less than the applicable wage rates and fringe benefits or cash equivalents for the classification of work performed, as specified in the applicable wage determination incorporated into the contract.
(C) The weekly submission of a properly executed certification set forth on the reverse side of Optional Form WH-347 shall satisfy the requirement for submission of the "Statement of Compliance" required by paragraph (a)(3)(ii)(B) of this section.
(D) The falsification of any of the above certifications may subject the consultant or sub-consultant to civil or criminal prosecution under section 1001 of title 18 and section 231 of title 31 of the United States Code. (iii) The consultant or sub-consultant shall make the records required under paragraph (a)(3)(i) of this section available for inspection, copying, or transcription by authorized representatives of the Federal Transit Administration or the Department of Labor, and shall permit such representatives to interview employees during working hours on the job. If the consultant or sub-consultant fails to submit the required records or to make them available, the Federal agency may, after written notice to the consultant, sponsor, applicant, or owner, take such action as may be necessary to cause the suspension of any further payment, advance, or guarantee of funds. Furthermore, failure to submit the required records upon request or to make such records available may be grounds for debarment action pursuant to 29 CFR 5.12. (4) Apprentices and trainees - (i) Apprentices - Apprentices will be permitted to work at less than the predetermined rate for the work they performed when they are employed pursuant to and individually registered in a bona fide apprenticeship program registered with the U.S. Department of Labor, Employment and Training Administration, Bureau of Apprenticeship and Training, or with a State Apprenticeship Agency recognized by the Bureau, or if a person is employed in his or her first ninety (90) days of probationary employment as an apprentice in such an apprenticeship program, who is not individually registered in the DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 program, but who has been certified by the Bureau of Apprenticeship and Training or a State Apprenticeship Agency (where appropriate) to be eligible for probationary employment as an apprentice. The allowable ratio of apprentices to journeymen on the job site in any craft classification shall not be greater than the ratio permitted to the consultant as to the entire work force under the registered program. Any worker listed on a payroll at an apprentice wage rate, who is not registered or otherwise employed as stated above, shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any apprentice performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. Where a consultant is performing construction on a project in a locality other than that in which its program is registered, the ratios and wage rates (expressed in percentages of the journeyman's hourly rate) specified in the Consultant's or Sub-consultant's registered program shall be observed. Every apprentice must be paid at not less than the rate specified in the registered program for the apprentice's level of progress, expressed as a percentage of the journeymen hourly rate specified in the applicable wage determination. Apprentices shall be paid fringe benefits in accordance with the provisions of the apprenticeship program. If the apprenticeship program does not specify fringe benefits, apprentices must be paid the full amount of fringe benefits listed on the wage determination for the applicable classification. If the Administrator of the Wage and Hour Division of the U.S. Department of Labor determines that a different practice prevails for the applicable apprentice classification, fringes shall be paid in accordance with that determination. In the event the Bureau of Apprenticeship and Training, or a State Apprenticeship Agency recognized by the Bureau, withdraws approval of an apprenticeship program, the consultant will no longer be permitted to utilize apprentices at less than the applicable predetermined rate for the work performed until an acceptable program is approved.
(ii) Trainees - Except as provided in 29 CFR 5.16, trainees will not be permitted to work at less than the predetermined rate for the work performed unless they are employed pursuant to and individually registered in a program which has received prior approval, evidenced by formal certification by the U.S. Department of Labor, Employment and Training Administration. The ratio of trainees to journeymen on the job site shall not be greater than permitted under the plan approved by the Employment and Training Administration.

Every trainee must be paid at not less than the rate specified in the approved program for the trainee's level of progress, expressed as a percentage of the journeyman hourly rate specified in the applicable wage determination. Trainees shall be paid fringe benefits in accordance with the provisions of the trainee program. If the trainee program does not mention fringe benefits, trainees shall be paid the full amount of fringe benefits listed on the wage determination unless the Administrator of the Wage and Hour Division determines that there is an apprenticeship program associated with the corresponding journeyman wage rate on the wage determination which provides for less than full fringe benefits for apprentices. Any employee listed on the payroll at a trainee rate who is not registered and participating in a training plan approved by the Employment and Training Administration shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any trainee performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. In the event the Employment and Training Administration withdraws approval of a training program, the consultant will no longer be permitted to utilize trainees at less than the applicable predetermined rate for the work performed until an acceptable program is approved.
(iii) Equal employment opportunity - The utilization of apprentices, trainees and journeymen under this part shall be in conformity with the equal employment opportunity requirements of Executive Order 11246, as amended and 29 CFR part 30.
(5) Compliance with Copeland Act requirements - The consultant shall comply with the requirements of 29 CFR part 3, which are incorporated by reference in this contract. (6) Subcontracts - The consultant or sub-consultant shall insert in any subcontracts the clauses contained in 29 CFR 5.5(a)(1) through (10) and such other clauses as the Federal Transit Administration may by appropriate instructions require, and also a clause requiring the sub-consultants to include these clauses in any lower tier subcontracts. The prime consultant shall be responsible for the compliance by any subconsultant or lower tier sub-consultant with all the contract clauses in 29 CFR 5.5. (7) Contract termination: debarment - A breach of the contract clauses in 29 CFR 5.5 may be grounds DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 for termination of the contract, and for debarment as a consultant and a sub-consultant as provided in 29 CFR 5.12.
(8) Compliance with Davis-Bacon and Related Act requirements - All rulings and interpretations of the Davis-Bacon and Related Acts contained in 29 CFR parts 1, 3, and 5 are herein incorporated by reference in this contract.
(9) Disputes concerning labor standards - Disputes arising out of the labor standards provisions of this contract shall not be subject to the general disputes clause of this contract. Such disputes shall be resolved in accordance with the procedures of the Department of Labor set forth in 29 CFR parts 5, 6, and 7.

Disputes within the meaning of this clause include disputes between the consultant (or any of its subconsultants) and the contracting agency, the U.S. Department of Labor, or the employees or their representatives.
(10) Certification of eligibility - (i) By entering into this contract, the consultant certifies that neither it (nor he or she) nor any person or Consultant who has an interest in the consultant's Consultant is a person or Consultant ineligible to be awarded Government contracts by virtue of section 3(a) of the Davis-Bacon Act or 29 CFR 5.12(a)(1).
(ii) No part of this contract shall be subcontracted to any person or Consultant ineligible for award of a Government contract by virtue of section 3(a) of the Davis-Bacon Act or 29 CFR 5.12(a)(1). (iii) The penalty for making false statements is prescribed in the U.S. Criminal Code, 18 U.S.C. 1001. (b) Contract Work Hours and Safety Standards Act. The Agency Head shall cause or require the contracting officer to insert the following clauses set forth in paragraphs (b)(1), (2), (3), and (4) of this section in full in any contract in an amount in excess of $100,000 and subject to the overtime provisions of the Contract Work Hours and Safety Standards Act. These clauses shall be inserted in addition to the clauses required by §5.5(a) or §4.6 of part 4 of this title. As used in this paragraph, the terms laborers and mechanics include watchmen and guards.
(1) Overtime requirements. No consultant or sub-consultant contracting for any part of the contract work which may require or involve the employment of laborers or mechanics shall require or permit any such laborer or mechanic in any workweek in which he or she is employed on such work to work in excess of forty hours in such workweek unless such laborer or mechanic receives compensation at a rate not less than one and one-half (1.5) times the basic rate of pay for all hours worked in excess of forty (40) hours in such workweek.
(2) Violation; liability for unpaid wages; liquidated damages. In the event of any violation of the clause set forth in paragraph (b)(1) of this section the consultant and any sub-consultant responsible therefor shall be liable for the unpaid wages. In addition, such consultant and sub-consultant shall be liable to the United States (in the case of work done under contract for the District of Columbia or a territory, to such District or to such territory), for liquidated damages. Such liquidated damages shall be computed with respect to each individual laborer or mechanic, including watchmen and guards, employed in violation of the clause set forth in paragraph (b)(1) of this section, in the sum of $10 for each calendar day on which such individual was required or permitted to work in excess of the standard workweek of forty hours without payment of the overtime wages required by the clause set forth in paragraph (b)(1) of this section. (3) Withholding for unpaid wages and liquidated damages. The (write in the name of the Federal agency or the loan or grant recipient) shall upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld, from any moneys payable on account of work performed by the consultant or sub-consultant under any such contract or any other Federal contract with the same prime consultant, or any other federally-assisted contract subject to the Contract Work Hours and Safety Standards Act, which is held by the same prime consultant, such sums as may be determined to be necessary to satisfy any liabilities of such consultant or sub-consultant for unpaid wages and liquidated damages as provided in the clause set forth in paragraph (b)(2) of this section. (4) Subcontracts. The consultant or sub-consultant shall insert in any subcontracts the clauses set forth in paragraph (b)(1) through (4) of this section and also a clause requiring the sub-consultants to include these clauses in any lower tier subcontracts. The prime consultant shall be responsible for compliance by any DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 sub-consultant or lower tier sub-consultant with the clauses set forth in paragraphs (b)(1) through (4) of this section.
(c) In addition to the clauses contained in paragraph (b), in any contract subject only to the Contract Work Hours and Safety Standards Act and not to any of the other statutes cited in §5.1, the Agency Head shall cause or require the contracting officer to insert a clause requiring that the consultant or sub-consultant shall maintain payrolls and basic payroll records during the course of the work and shall preserve them for a period of three years from the completion of the contract for all laborers and mechanics, including guards and watchmen, working on the contract. Such records shall contain the name and address of each such employee, social security number, correct classifications, hourly rates of wages paid, daily and weekly number of hours worked, deductions made, and actual wages paid. Further, the Agency Head shall cause or require the contracting officer to insert in any such contract a clause providing that the records to be maintained under this paragraph shall be made available by the consultant or sub-consultant for inspection, copying, or transcription by authorized representatives of the (write the name of agency) and the Department of Labor, and the consultant or sub-consultant will permit such representatives to interview employees during working hours on the job.
(The information collection, recordkeeping, and reporting requirements contained in the following paragraphs of this section were approved by the Office of Management and Budget:

OMB Control Number
(a)(1)(ii)(B) 1215-0140
(a)(1)(ii)(C) 1215-0140
(a)(1)(iv) 1215-0140
(a)(3)(i) 1215-0140,
1215-0017
(a)(3)(ii)(A) 1215-0149
(c) 1215-0140,
1215-0017
[48 FR 19540, Apr. 29, 1983, as amended at 51 FR 12265, Apr. 9, 1986; 55 FR 50150, Dec. 4, 1990; 57 FR 28776, June 26, 1992; 58 FR 58955, Nov. 5, 1993; 61 FR 40716, Aug. 5, 1996; 65 FR 69693, Nov. 20, 2000; 73 FR 77511, Dec. 19, 2008]
Effective Date Note: At 58 FR 58955, Nov. 5, 1993, §5.5 was amended by suspending paragraph (a)(1)(ii) indefinitely.

19. CONTRACT WORK HOURS AND SAFETY STANDARDS ACT
29 CFR Part 5
40 U.S.C. 3701 et seq.
40 U.S.C. 3702
Applicability to Contracts: The Contract Work Hours and Safety Standards Act is codified at 40 USC 3701, et seq. The Act applies to grantee contracts and subcontracts “financed at least in part by loans or grants from … the [Federal] Government.” 40 USC 3701(b) (1) (B) (iii) and (b) (2), 29 CFR 5.2(h), 49 CFR

18.36(i) (6).

The Act applies to construction contracts and, in very limited circumstances, non-construction projects that employ “laborers or mechanics on a public work” with a value greater than $100,000. These nonconstruction applications do not generally apply to transit procurements because transit procurements (to include rail cars and buses) are deemed “commercial items.” 40 USC 3707, 41 USC 403 (12) Flow down Requirements: Applies to third party consultants and sub-consultants. (1) Overtime requirements - No consultant or sub-consultant contracting for any part of the contract work which may require or involve the employment of laborers or mechanics shall require or permit any such laborer or mechanic in any workweek in which he or she is employed on such work to work in excess of forty (40) hours in such workweek unless such laborer or mechanic receives compensation at a rate not less than one and one-half (1.5) times the basic rate of pay for all hours worked in excess of forty (40) hours in such workweek.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 (2) Violation; liability for unpaid wages; liquidated damages - In the event of any violation of the clause set forth in paragraph (1) of this section the consultant and any sub-consultant responsible therefor shall be liable for the unpaid wages. In addition, such consultant and sub-consultant shall be liable to the United States for liquidated damages. Such liquidated damages shall be computed with respect to each individual laborer or mechanic, including watchmen and guards, employed in violation of the clause set forth in paragraph (1) of this section, in the sum of $10 for each calendar day on which such individual was required or permitted to work in excess of the standard workweek of forty (40) hours without payment of the overtime wages required by the clause set forth in paragraph (1) of this section. (3) Withholding for unpaid wages and liquidated damages - NCTD shall upon its own action or upon written request of an authorized representative of the Department of Labor withhold or cause to be withheld, from any moneys payable on account of work performed by the consultant or sub-consultant under any such contract or any other Federal contract with the same prime consultant, or any other federally-assisted contract subject to the Contract Work Hours and Safety Standards Act, which is held by the same prime consultant, such sums as may be determined to be necessary to satisfy any liabilities of such consultant or sub-consultant for unpaid wages and liquidated damages as provided in the clause set forth in paragraph (2) of this section.
(4) Subcontracts - The Consultant or sub-consultant shall insert in any subcontracts the clauses set forth in paragraphs (1) through (4) of this section and also a clause requiring the sub-consultants to include these clauses in any lower tier subcontracts. The prime consultant shall be responsible for compliance by any sub-consultant or lower tier sub-consultant with the clauses set forth in paragraphs (1) through (4) of this section.

20. NO GOVERNMENT OBLIGATION TO THIRD PARTIES
Applicability to Contracts: Applicable to all contracts.

Flow down Requirements: This concept should flow down to all levels to clarify, to all parties to the contract, that the Federal Government does not have contractual liability to third parties, absent specific written consent.

No Obligation by the Federal Government.
(1) NCTD and the Consultant acknowledge and agree that, notwithstanding any concurrence by the Federal Government in or approval of the solicitation or award of the underlying contract, absent the express written consent by the Federal Government, the Federal Government is not a party to this contract and shall not be subject to any obligations or liabilities to NCTD, Consultant, or any other party (whether or not a party to that contract) pertaining to any matter resulting from the underlying contract. (2) The Consultant agrees to include the above clause in each subcontract financed in whole or in part with Federal assistance provided by FTA. It is further agreed that the clause shall not be modified, except to identify the sub-consultant who will be subject to its provisions.

21. PROGRAM FRAUD AND FALSE OR FRAUDULENT STATEMENTS AND RELATED ACTS 31 U.S.C. 3801 et seq.
49 CFR Part 31
18 U.S.C. 1001
49 U.S.C. 5307
Applicability to Contracts: These requirements are applicable to all contracts.

Flow down Requirements: These requirements flow down to consultants and sub-consultants who make, present, or submit covered claims and statements.

Program Fraud and False or Fraudulent Statements or Related Acts (1) The Consultant acknowledges that the provisions of the Program Fraud Civil Remedies Act of 1986, as amended, 31 U.S.C. §§ 3801 et seq. and U.S. DOT regulations, "Program Fraud Civil Remedies," 49 C.F.R.

Part 31, apply to its actions pertaining to this Project. Upon execution of the underlying contract, the Consultant certifies the truthfulness and accuracy of any statement it has made, it makes, it may make, or DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 causes to be made, pertaining to the underlying contract or the FTA assisted project for which this contract work is being performed. In addition to other penalties that may be applicable, the Consultant further acknowledges that if it makes, or causes to be made, a false, fictitious, or fraudulent claim, statement, submission, or certification, the Federal Government reserves the right to impose the penalties of the Program Fraud Civil Remedies Act of 1986 on the Consultant to the extent the Federal Government deems appropriate.
(2) The Consultant also acknowledges that if it makes, or causes to be made, a false, fictitious, or fraudulent claim, statement, submission, or certification to the Federal Government under a contract connected with a project that is financed in whole or in part with Federal assistance originally awarded by FTA under the authority of 49 U.S.C. § 5307, the Government reserves the right to impose the penalties of 18 U.S.C. § 1001 and 49 U.S.C. § 5307(n)(1) on the Consultant, to the extent the Federal Government deems appropriate.
(3) The Consultant agrees to include the above two (2) clauses in each subcontract financed in whole or in part with Federal assistance provided by FTA. It is further agreed that the clauses shall not be modified, except to identify the sub-consultant who will be subject to the provisions.

22. TERMINATION
49 CFR Part 18
FTA Circular 4220.1F
See Section 16 of the Purchase Order Terms & Conditions

23. GOVERNMENT-WIDE DEBARMENT AND SUSPENSION (NON-PROCUREMENT) 49 CFR 18
2 CFR 1200
2 CFR 180
Executive Orders 12549 and 12689
31 U.S.C. 6101
Background and Applicability: In addition to the contracts covered under 2 CFR 180.220(b) of the OMB guidance, this part applies to any contract, regardless of tier, that is awarded by a consultant, subconsultant, supplier, Consultant, or its agent or representative in any transaction, if the contract is to be funded or provided by the Department of Transportation under a covered non-procurement transaction and the amount of the contract is expected to equal or exceed $25,000. This extends the coverage of the Department of Transportation non-procurement suspension and debarment requirements to all lower tiers of subcontracts under covered non-procurement transactions, as permitted under the OMB guidance at 2 CFR 180.220(c) (see optional lower-tier coverage in the figure in the appendix to 2 CFR part 180).This government-wide regulation implements Executive Order 12549, Debarment and Suspension, Executive Order 12689, Debarment and Suspension, and 31 U.S.C. 6101 note (Section 2455, Public Law 103-355, 108 Stat. 3327).

These provisions apply to all NCTD contracts and subcontracts at any level expected to equal or exceed $25,000 as well as any contract or subcontract (at any level) for federally required auditing services. These are contracts and subcontracts referred to in the regulation as “covered transactions.” Grantees, consultants, and sub-consultants (at any level) that enter into covered transactions are required to verify that the entity (as well as its principals and affiliates) they propose to contract or subcontract with is not excluded or disqualified. They do this by (a) Checking the Excluded Parties List System (EPLS), (b) Collecting a certification from that person, or (c) Adding a clause or condition to the contract or subcontract.

Grantees, consultants, and sub-consultants who enter into covered transactions also must require the entities they contract with to comply 2 CFR 180 and include this requirement in their own subsequent covered transactions (i.e., the requirement flows down to subcontracts at all levels).

Flow down Requirements: These requirements flow down to consultants and sub-consultants at all levels.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 Suspension and Debarment: This contract is a covered transaction for purposes of 49 CFR Part 18. As such, the consultant is required to verify that none of the consultant, its principals, are excluded or disqualified as defined under Executive Orders Nos. 12549 and 12689.

The consultant is required to comply with 2 CFR 1200, and must include the requirement to comply with 2 CFR 1200, Subpart C in any lower tier covered transaction it enters into.

By signing and submitting its bid or proposal, the Firm certifies as follows:

The certification in this clause is a material representation of fact relied upon by NCTD. If it is later determined that the Firm knowingly rendered an erroneous certification, in addition to remedies available to NCTD, the Federal Government may pursue available remedies, including but not limited to suspension and/or debarment. The Firm agrees to comply with the requirements 2 CFR 180 while this offer is valid and throughout the period of any contract that may arise from this offer. The Firm further agrees to include a provision requiring such compliance in its lower tier covered transactions.

24. PRIVACY ACT
5 U.S.C. 552
Applicability to Contracts: When NCTD maintains files on drug and alcohol enforcement activities for FTA, and those files are organized so that information could be retrieved by personal identifier, the Privacy Act requirements apply to all contracts.

Flow down Requirements: The Federal Privacy Act requirements flow down to each third party consultant and their contracts at every tier.

Contracts Involving Federal Privacy Act Requirements: The following requirements apply to the Consultant and its employees that administer any system of records on behalf of the Federal Government under any contract:
(1) The Consultant agrees to comply with, and assures the compliance of its employees with, the information restrictions and other applicable requirements of the Privacy Act of 1974, 5 U.S.C. § 552a.

Among other things, the Consultant agrees to obtain the express consent of the Federal Government before the Consultant or its employees operate a system of records on behalf of the Federal Government. The Consultant understands that the requirements of the Privacy Act, including the civil and criminal penalties for violation of that Act, apply to those individuals involved, and that failure to comply with the terms of the Privacy Act may result in termination of the underlying contract.

25. CIVIL RIGHTS REQUIREMENTS
29 U.S.C. § 623, 42 U.S.C. § 2000
42 U.S.C. § 6102, 42 U.S.C. § 12112
42 U.S.C. § 12132, 49 U.S.C. § 5332
29 CFR Part 1630, 41 CFR Parts 60 et seq.

1. The Contractor will be required to comply with these applicable civil rights, nondiscrimination, and equal employment opportunity laws and regulations:
i. 49 CFR Part 21, 49 CFR Part 25, 49 CFR Part 26, 49 CFR Part 27, 49 CFR Part 37, 49 CFR Part 38, 49 CFR Part 39, 20 U.S.C. §§ 1681 – 1683 and 1685 – 1687, 21 U.S.C. § 1101, 29 U.S.C. § 794, et seq., 42 U.S.C. § 290dd – 290dd-2, 42 U.S.C. § 2000d, 42 U.S.C. § 3601, 42 U.S.C. § 4541, 42 U.S.C. § 6101 – 6107, 42 U.S.C. § 12101, et seq., 42 U.S.C § 12132, 49 U.S.C § 5307 (c)(1)(D)(ii), 49 U.S.C § 5332, California Civil Code § 51, California Government Code § 11135 ii. 29 CFR Part 1630, 41 CFR Part 60, 29 U.S.C. § 623, 42 U.S.C. § 2000e, 42 U.S.C. § 12112, California Government Code § 12900 - 12996
iii. 49 U.S.C. § 5325 (k).
iv. Fixing America’s Surface Transportation (FAST) Act, Public Law No: 114-94, as may be amended.

2. The Civil Rights requirements flow down to all third party sub-contractors and their subcontracts at every tier.

3. The following requirements apply to a contract awarded as a result of this solicitation:

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 i. Nondiscrimination - In accordance with U.S. Department of Transportation (DOT), Federal, and State of California regulations 49 CFR Part 21, 49 CFR Part 25, 49 CFR Part 27, 49 CFR Part 37, 49 CFR Part 38, 49 CFR Part 39, the Rehabilitation Act of 1973, as amended, 20 U.S.C. §§ 1681 – 1683 and 1685 – 1687, 21 U.S.C. § 1101, 29 U.S.C. § 794, Title VI of the Civil Rights Act, as amended, 42 U.S.C. § 290dd – 290dd-2, 42 U.S.C. § 2000d, section 303 of the Age Discrimination Act of 1975, as amended, 42 U.S.C. § 3601, 42 U.S.C. § 4541, 42 U.S.C. § 6102, 42 U.S.C. § 6101 – 6107, section 202 of the Americans with Disabilities Act of 1990, 42 U.S.C. § 12101, 42 U.S.C. § 12132, Federal transit law 49 U.S.C § 5307 (c)(1)(D)(ii), Federal transit law 49 U.S.C. § 5332, FTA Circular 4702.1, “Title VI Requirements and Guidelines for Federal Transit Administration Recipients.”, DOT Order to Address Environmental Justice in Minority Populations and Low-Income Populations, Executive Order No. 13166 and DOT Policy Guidance Concerning Recipients’ Responsibilities to Limited English Proficiency (70 FR 74087, Dec. 14, 2005), the Unruh Civil Rights Act, California Civil Code § 51, and California Government Code § 11135, the Contractor agrees that it will comply with the identified Federal and State of California laws and regulations, pertaining to NCTD programs and activities, to ensure that no person will be denied the benefits of, or otherwise be subjected to, discrimination (particularly in the level and quality of transportation services and transportation-related benefits) on the bases of race, color, religion, national origin, ancestry, sex, sexual orientation, gender identity, gender expression, age, marital status, genetic information, medical condition, or disability. In addition, the Contractor agrees to comply with applicable Federal implementing regulations, other implementing requirements that DOT or FTA may issue, and any other applicable Federal and State of California statutes and/or regulations that may be signed into law or promulgated.
ii. Equal Employment Opportunity - The following equal employment opportunity requirements apply to a contract awarded as a result of this solicitation:
a) Race, Color, Ancestry, Marital Status, Medical Condition, Genetic Information, Religion, National Origin, Sex, Sexual Orientation, Gender Identity, Gender Expression - In accordance with Title VII of the Civil Rights Act, as amended, 42 U.S.C. § 2000e, 49 U.S.C. § 5332, FTA Circular 4704.1, “Equal Employment Program Guidelines for Grant Recipients”, and , the Contractor agrees to comply with all applicable equal employment opportunity requirements of U.S. Department of Labor (U.S. DOL) regulations, including "Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor," 41 C.F.R. Parts 60, et seq., (which implement Executive Order No. 11246, "Equal Employment Opportunity," as amended by Executive Order No. 11375, "Amending Executive Order 11246 Relating to Equal Employment Opportunity," 42 U.S.C. § 2000e note), Fair Employment and Housing Act, California Government Code Sections 12900 - 12996 and with any applicable Federal statutes, executive orders, regulations, and Federal policies that may in the future affect Bidder agrees to take affirmative action to ensure that applicants are employed, and that employees are treated during employment, without regard to their race, color, ancestry, religion, marital status, medical condition, genetic information, national origin, sex, sexual orientation, gender identity, gender expression, or age. Such action shall include, but not be limited to, the following: employment, upgrading, demotion or transfer, recruitment or recruitment advertising, layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship.

In addition, the Contractor agrees to comply with any implementing requirements that DOT or FTA may issue, and any other applicable Federal statutes that may be signed into law or Federal regulations that may be promulgated.
b) Sex – The Contractor agrees to comply with all applicable requirements of Title IX of the Education Amendments of 1975, as amended, 20 U.S.C. § 1681, and 49 CFR part 25. In addition, the Contractor agrees to comply with any implementing requirements that DOT or FTA may issue.
c) Age - The Contractor agrees to comply with all applicable requirements of the Age Discrimination Act of 1975, as amended, 42 U.S.C. § 6101, 45 CFR part 90, the Age Discrimination in Employment Act, 29 U.S.C. §§ 621-634, and Equal Employment Opportunity Commission (EEOC) implementing regulations 29 CFR part 1625. In addition, the Contractor agrees to comply with any implementing requirements that DOT or FTA may issue.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 d) Disabilities - The Contractor agrees to comply with Section 504 of the Rehabilitation Act of 1973, as amended, 29 U.S.C. § 794, Section 508 of the Rehabilitation Act of 1973, as amended, 29 U.S.C. § 794(d), 36 CFR part 1194, the Americans with Disabilities Act of 1990, as amended, 42 U.S.C. § 12101, 49 CFR parts 27, 37, 38, and 39, and FTA Circular 4710.1, “Americans with Disabilities Act: Guidance”. In addition, the Contractor agrees to comply with any implementing requirements that DOT or FTA may issue.

4. The Contractor agrees to include these requirements in each subcontract financed in whole or in part with Federal assistance provided by FTA, modified only if necessary to identify the affected parties.

26. ADA ACCESS REQUIREMENTS
49 U.S.C. § 5301, 29 U.S.C. § 794, 42 U.S.C. § 12101
Applicability to Contracts: The Consultant shall comply with 49 USC 5301(d), stating Federal policy that the elderly and persons with disabilities have the same rights as other persons to use mass transportation services and facilities and that special efforts shall be made in planning and designing those services and facilities to implement that policy. Consultant shall also comply with all applicable requirements of Sec. 504 of the Rehabilitation Act (1973), as amended, 29 USC 794, which prohibits discrimination on the basis of handicaps, and the Americans with Disabilities Act of 1990 (ADA), as amended, 42 USC 12101 et seq., which requires that accessible facilities and services be made available to persons with disabilities, including any subsequent amendments thereto.

27. BREACHES AND DISPUTE RESOLUTION
49 CFR Part 18
FTA Circular 4220.1F
Applicability to Contracts: All contracts in excess of $100,000 shall contain provisions or conditions which will allow for administrative, contractual, or legal remedies in instances where consultants violate or breach contract terms, and provide for such sanctions and penalties as may be appropriate. This may include provisions for bonding, penalties for late or inadequate performance, retained earnings, liquidated damages or other appropriate measures.

Flow Down Requirements: The Breaches and Dispute Resolutions requirements flow down to all tiers.

Disputes - Disputes arising in the performance of this Contract which are not resolved by agreement of the parties shall be decided in writing by the authorized representative of NCTD. This decision shall be final and conclusive unless within ten (10) days from the date of receipt of its copy, the Consultant mails or otherwise furnishes a written appeal to the NCTD. In connection with any such appeal, the Consultant shall be afforded an opportunity to be heard and to offer evidence in support of its position. The decision of NCTD shall be binding upon the Consultant and the Consultant shall abide be the decision.

Performance During Dispute - Unless otherwise directed by NCTD, Consultant shall continue performance under this Contract while matters in dispute are being resolved.

Claims for Damages - Should either party to the Contract suffer injury or damage to person or property because of any act or omission of the party or of any of his employees, agents or others for whose acts he is legally liable, a claim for damages therefore shall be made in writing to such other party within a reasonable time after the first observance of such injury of damage.

Remedies - Unless this contract provides otherwise, all claims, counterclaims, disputes and other matters in question between the NCTD and the Consultant arising out of or relating to this agreement or its breach will be decided by arbitration if the parties mutually agree, or in a court of competent jurisdiction within the State in which the NCTD is located.

Rights and Remedies - The duties and obligations imposed by the Contract Documents and the rights and remedies available thereunder shall be in addition to and not a limitation of any duties, obligations, rights and remedies otherwise imposed or available by law. No action or failure to act by NCTD or Consultant shall constitute a waiver of any right or duty afforded any of them under the Contract, nor shall any such DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 action or failure to act constitute an approval of or acquiescence in any breach thereunder, except as may be specifically agreed in writing.

28. PATENT AND RIGHTS IN DATA
37 CFR Part 401
49 CFR Parts 18 and 19
Applicability to Contracts: Patent and rights in data requirements for federally assisted projects ONLY apply to research projects in which FTA finances the purpose of the grant is to finance the development of a product or information. These patent and data rights requirements do not apply to capital projects or operating projects, even though a small portion of the sales price may cover the cost of product development or writing the user's manual.

Flow down Requirements: The Patent and Rights in Data requirements apply to all consultants and their contracts at every tier.

CONTRACTS INVOLVING EXPERIMENTAL, DEVELOPMENTAL, OR RESEARCH WORK.

A. Rights in Data - The following requirements apply to each contract involving experimental, developmental or research work:
(1) The term "subject data" used in this clause means recorded information, whether or not copyrighted, that is delivered or specified to be delivered under the contract. The term includes graphic or pictorial delineation in media such as drawings or photographs; text in specifications or related performance or design-type documents; machine forms such as punched cards, magnetic tape, or computer memory printouts; and information retained in computer memory. Examples include, but are not limited to: computer software, engineering drawings and associated lists, specifications, standards, process sheets, manuals, technical reports, catalog item identifications, and related information. The term "subject data" does not include financial reports, cost analyses, and similar information incidental to contract administration. (2) The following restrictions apply to all subject data first produced in the performance of the contract to which this Attachment has been added:
(a) Except for its own internal use, NCTD or Consultant may not publish or reproduce subject data in whole or in part, or in any manner or form, nor may NCTD or Consultant authorize others to do so, without the written consent of the Federal Government, until such time as the Federal Government may have either released or approved the release of such data to the public; this restriction on publication, however, does not apply to any contract with an academic institution. (b) In accordance with 49 C.F.R. § 18.34 and 49 C.F.R. § 19.36, the Federal Government reserves a royaltyfree, non-exclusive and irrevocable license to reproduce, publish, or otherwise use, and to authorize others to use, for "Federal Government purposes," any subject data or copyright described in subsections (2)(b)1 and (2)(b)2 of this clause below. As used in the previous sentence, "for Federal Government purposes," means use only for the direct purposes of the Federal Government. Without the copyright owner's consent, the Federal Government may not extend its Federal license to any other party.

1. Any subject data developed under that contract, whether or not a copyright has been obtained; and

2. Any rights of copyright purchased by NCTD or Consultant using Federal assistance in whole or in part provided by FTA.
(c) When FTA awards Federal assistance for experimental, developmental, or research work, it is FTA's general intention to increase transportation knowledge available to the public, rather than to restrict the benefits resulting from the work to participants in that work. Therefore, unless FTA determines otherwise, NCTD and the Consultant performing experimental, developmental, or research work required by the underlying contract to which this Attachment is added agrees to permit FTA to make available to the public, either FTA's license in the copyright to any subject data developed in the course of that contract, or a copy of the subject data first produced under the contract for which a copyright has not been obtained. If the experimental, developmental, or research work, which is the subject of the underlying contract, is not completed for any reason whatsoever, all data developed under that contract shall become subject data as defined in subsection (a) of this clause and shall be delivered as the Federal Government may direct. This DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623 subsection (c), however, does not apply to adaptations of automatic data processing equipment or programs for NCTD or Consultant's use whose costs are financed in whole or in part with Federal assistance provided by FTA for transportation capital projects. (d) Unless prohibited by state law, upon request by the Federal Government, NCTD and the Consultant agree to indemnify, save, and hold harmless the Federal Government, its officers, agents, and employees acting within the scope of their official duties against any liability, including costs and expenses, resulting from any willful or intentional violation by NCTD or Consultant of proprietary rights, copyrights, or right of privacy, arising out of the publication, translation, reproduction, delivery, use, or disposition of any data furnished under that contract. Neither NCTD nor the Consultant shall be required to indemnify the Federal Government for any such liability arising out of the wrongful act of any employee, official, or agents of the Federal Government.
(e) Nothing contained in this clause on rights in data shall imply a license to the Federal Government under any patent or be construed as affecting the scope of any license or other right otherwise granted to the Federal Government under any patent.
(f) Data developed by NCTD or Consultant and financed entirely without using Federal assistance provided by the Federal Government that has been incorporated into work required by the underlying contract to which this Attachment has been added is exempt from the requirements of subsections (b), (c), and (d) of this clause, provided that NCTD or Consultant identifies that data in writing at the time of delivery of the contract work.
(g) Unless FTA determines otherwise, the Consultant agrees to include these requirements in each subcontract for experimental, developmental, or research work financed in whole or in part with Federal assistance provided by FTA.
(3) Unless the Federal Government later makes a contrary determination in writing, irrespective of the Consultant's status (i.e., a large business, small business, state government or state instrumentality, local government, nonprofit organization, institution of higher education, individual, etc.), NCTD and the Consultant agree to take the necessary actions to provide, through FTA, those rights in that invention due the Federal Government as described in
U.S. Department of Commerce regulations, "Rights to Inventions Made by Nonprofit Organizations and Small Business Consultants under Government Grants, Contracts and Cooperative Agreements," 37 C.F.R. Part 401.
(4) The Consultant also agrees to include these requirements in each subcontract for experimental, developmental, or research work financed in whole or in part with Federal assistance provided by FTA.

B. Patent Rights - The following requirements apply to each contract involving experimental, developmental, or research work:
(1) General - If any invention, improvement, or discovery is conceived or first actually reduced to practice in the course of or under the contract to which this Attachment has been added, and that invention, improvement, or discovery is patentable under the laws of the United States of America or any foreign country, NCTD and Consultant agree to take actions necessary to provide immediate notice and a detailed report to the party at a higher tier until FTA is ultimately notified. (2) Unless the Federal Government later makes a contrary determination in writing, irrespective of the Consultant's status (a large business, small business, state government or state instrumentality, local government, nonprofit organization, institution of higher education, individual), NCTD and the Consultant agree to take the necessary actions to provide, through FTA, those rights in that invention due the Federal Government as described in U.S. Department of Commerce regulations, "Rights to Inventions Made by Nonprofit Organizations and Small Business Consultants Under Government Grants, Contracts and Cooperative Agreements," 37 C.F.R. Part 401.
(3) The Consultant also agrees to include the requirements of this clause in each subcontract for experimental, developmental, or research work financed in whole or in part with Federal assistance provided by FTA.

DocuSign Envelope ID: 0BCAE3B2-ECE2-4C1D-B546-7D2DDB787623

29. TRANSIT EMPLOYEE PROTECTIVE AGREEMENTS
49 U.S.C. § 5310, § 5311, and § 5333
29 CFR Part 215
Applicability to Contracts: The Transit Employee Protective Provisions apply to each contract for transit operations performed by employees of a Consultant recognized by FTA to be a transit operator. (Because transit operations involve many activities apart from directly driving or operating transit vehicles, FTA determines which activities constitute transit "operations" for purposes of this clause.) Flow down Requirements: These provisions are applicable to all contracts and subcontracts at every tier. (a) General Transit Employee Protective Requirements - To the extent that FTA determines that transit operations are involved, the Consultant agrees to carry out the transit operations work on the underlying contract in compliance with terms and conditions determined by the U.S. Secretary of Labor to be fair and equitable to protect the interests of employees employed under this contract and to meet the employee protective requirements of 49 U.S.C. A 5333(b), and U.S. DOL guidelines at 29 C.F.R. Part 215, and any amendments thereto. These terms and conditions are identified in the letter of certification from the U.S.

DOL to FTA applicable to NCTD's project from which Federal assistance is provided to support work on the underlying contract. The Consultant agrees to carry out that work in compliance with the conditions stated in that U.S. DOL letter. The requirements of this subsection (1), however, do not apply to any contract financed with Federal assistance provided by FTA either for projects for elderly individuals and individuals with disabilities authorized by 49 U.S.C. § 5310(a)(2), or for projects for non-urbanized areas authorized by 49 U.S.C. § 5311. Alternate provisions for those projects are set forth in subsections (b) and (c) of this clause.
(b) Transit Employee Protective Requirements for Projects Authorized by 49 U.S.C.§ 5310(a)(2) for Elderly Individuals and Individuals with Disabilities - If the contract involves transit operations financed in whole or in part with Federal assistance authorized by 49 U.S.C. § 5310(a)(2), and if the U.S. Secretary of Transportation has determined or determines in the future that the employee protective requirements of 49 U.S.C. § 5333(b) are necessary or appropriate for the state and the public body sub-recipient for which work is performed on the underlying contract, the Consultant agrees to carry out the Project in compliance with the terms and conditions determined by the U.S. Secretary of Labor to meet the requirements of 49 U.S.C. § 5333(b), U.S. DOL guidelines at 29 C.F.R. Part 215, and any amendments thereto. These terms and conditions are identified in the U.S. DOL's letter of certification to FTA, the date of which is set forth Grant Agreement or Cooperative Agreement with the state. The Consultant agrees to perform transit operations in connection with the underlying contract in compliance with the conditions stated in that U.S.