Santa Rosa City Council
September 12, 2023

Professional Services Agreement
Form approved by the City Attorney 5-11-20

CITY OF SANTA ROSA

PROFESSIONAL SERVICES AGREEMENT

WITH ODP BUSINESS SOLUTIONS, LLC
AGREEMENT NUMBER _________

This "Agreement" is made as of this ____day of August, 2023, by and between the City of Santa Rosa, a municipal corporation ("City"), and ODP Business Solutions, LLC , a Delaware limited liability company ("ODP").

R E C I T A L S

A. City desires to update Storage Area Network (SAN) Systems.

B. City desires to retain a qualified firm to conduct the services described above in accordance with the Scope of Services as more particularly set forth in Exhibit A to this Agreement.

C. ODP represents to City that it is a company composed of highly trained professionals and is fully qualified to conduct the services described above and render advice to City in connection with said services.

D. The parties have negotiated upon the terms pursuant to which ODP will provide such services and have reduced such terms to writing.

AGREEMENT

NOW, THEREFORE, City and ODP agree as follows:

1. SCOPE OF SERVICES

ODP shall provide to City the services described in Exhibit A ("Scope of Services"). ODP shall provide these services at the time, place, and in the manner specified in Exhibit A. Exhibit A is attached hereto for the purpose of defining the manner and scope of services to be provided by ODP and is not intended to, and shall not be construed so as to, modify or expand the terms, conditions , or provisions contained in this Agreement. In the event of any conflict between this Agreement and any terms or conditions of any document prepared or provided by ODP and made a part of this Agreement, including without limitation any document relating to the Scope of Services or payment therefor, the terms of this Agreement shall control and prevail.

2. COMPENSATION

a. City shall pay ODP for services rendered pursuant to this Agreement at the rates, times, and in the manner set forth in Exhibit B. ODP shall submit monthly invoices (“Invoices”) to City in a form reasonably requested by City, which shall itemize the services performed as of the date of the

Professional Services Agreement
Form approved by the City Attorney 5-11-20

statement and set forth a progress report, including work accomplished during the period, percent of each task completed, and planned effort for the next period.

b. The payments prescribed herein shall constitute all compensation to ODP for all costs of services, including, but not limited to, direct costs of labor of employees engaged by ODP, travel expenses, telephone charges, copying and reproducti on, computer time, and any and all other costs, expenses, and charges of ODP , its agents and employees. In no event shall City be obligated to pay late fees or interest, whether or not such requirements are contained in ODP’s invoice.

c.

Notwithstanding any other provision in this Agreement to the contrary, the total maximum compensation to be paid for the satisfactory accomplishment and completion of all services to be performed hereunder shall in no event exceed the sum of one hundred sixty thousand, five hundred dollars and thirty-three cents ($160,500.33). The City’s Chief Financial Officer is authorized to pay all proper claims from Charge Number _____________.

3. DOCUMENTATION; RETENTION OF MATERIALS

a. ODP shall maintain adequate documentation to substantiate all charges as required under Section 2 of this Agreement.

b. ODP shall keep and maintain full and complete documentation and accounting records concerning all extra or special services performed by it that are compensable by other than an hourly or flat rate and shall make such documents and records available to authorized representatives of City for inspection at any reasonable time.

c. ODP shall maintain the records and any other records specifically related to the performance of this Agreement and shall allow City access to such records during the performance of this Agreement and for a period of four (4) years after completion of all services hereunder.

4. INDEMNITY

a. ODP shall, to the fullest extent permitted by law, indemnify, protect, defend, and hold harmless City, and its employees, officials , and agents ( "Indemnified Parties ") from all claims, demands, costs , or liability (including liability for claims, suits, a ctions, arbitration proceedings, administrative proceedings, regulatory proceedings, losses, expenses or costs of any kind, interest, defense costs, and expert witness fees), that arise out of, pertain to, or relate to the negligence, recklessness, or will ful misconduct of ODP , its officers, employees, or agents, in said performance of professional services under this Agreement, excepting only liability arising from the negligence, active negligence or intentional misconduct of City.

b. The existence or acceptance by City of any of the insurance policies or coverages described in this Agreement shall not affect or limit any of City’s rights under this Section 4, nor shall the limits of such insurance limit the liability of ODP hereunder. This Section 4 shall not apply to any intellectual property claims, actions, lawsuits or other proceedings subject to the provisions of Section 17(b), below. The provisions of this Section 4 shall survive any expiration or termination of this Agreement.

Professional Services Agreement
Form approved by the City Attorney 5-11-20

5. INSURANCE

a. ODP shall maintain in full force and effect all of the insurance coverage described in, and in accordance with, Attachment One, "Insurance Requirements." Maintenance of the insurance coverage set forth in Attachment One is a material element of this Agreement and a material part of the consideration provided by ODP in exchange for City ’s agreement to make the payments prescribed hereunder. Failure by ODP to (i) maintain or renew coverage, (ii) provide City notice of any changes, modifications, or reductions in coverage, or provide evidence of renewal, may be treated by City as a material breach of this Agreement by ODP, whereupon City shall be entitled to all rights and remedies at law or in equity, including but not limited to immediate termination of this Agreement. Notwithstanding the foregoing, any failure by ODP to maintain required insurance coverage shall not excuse or alleviate ODP from any of its other duties or obligations under this Agreement. In the event ODP, with approval of City pursuant to Section 6 below, retains or utilizes any subcontr actors or subconsultants s in the provision of any services to City under this Agreement, ODP shall assure that any such subcontractor has first obtained, and shall maintain, all of the insurance coverage s set forth in the Insurance Requirements in Attachment One.

b. ODP agrees that any available insurance proceeds broader than or in excess of the coverages set forth in the Insurance Requirements in Attachment One shall be available to the additional insureds identified therein.

c. ODP agrees that the insurance coverage s and limits provided under this Agreement are the greater of: (i) the coverages and limits specified in Attachment One, or (ii) the broader coverages and maximum limits of coverage of any insurance policy or proceeds available to the name insureds.

6. ASSIGNMENT

The Parties shall not assign any rights or duties under this Agreement without the express prior written consent of the other Party, in the other Party’s sole and absolute discretion. ODP agrees that the City shall have the right to approve any and all subcontractors to be used by ODP in the performance of this Agreement before ODP contracts with or otherwise engages any such subcontractors.

7. NOTICES

Except as otherwise provided in this Agreement, any notice, submittal, or communication required or permitted to be served on a party, shall be in writing to the person at the address of the office identified below. Service may also be made by certified mail, by placing first -class postage, and addressed as indicated below, and depositing in the United States mail to:

Professional Services Agreement
Form approved by the City Attorney 5-11-20

If to City:

If to ODP:

With a copy to:

_______________________
_______________________
Attn:__________________

ODP Business Solutions,
LLC
6600 North Military Trail
Boca Raton, FL 33496
Attn: Vice President

ODP Business Solutions,
LLC
6600 North Military Trail
Boca Raton, FL 33496
Attn: Office of the General
Counsel

8. INDEPENDENT CONTRACTOR

a. It is understood and agreed that ODP (including ODP’s employees) is an independent contractor and that no relationship of employer-employee exists between the parties hereto for any purpose whatsoever. Neither ODP nor ODP’s assigned personnel shall be entitled to any benefits payable to employees of City. City is not required to make any deducti ons or withholdings from the compensation payable to ODP under the provisions of this Agreement, and ODP shall be issued a Form 1099 for its services hereunder. As an independent contractor, ODP hereby agrees to indemnify and hold City harmless from any and all claims that may be made against City based upon any contention by any of ODP’s employees or by any third party, including but not limited to any state or federal agency, that an employer -employee relationship or a substitute therefor exists for any purpose whatsoever by reason of this Agreement or by reason of the nature and/or performance of any services under this Agreement.

b. It is further understood and agreed by the parties hereto that ODP , in the performance of ODP’s obligations hereunder, is subject to the control and direction of City as to the designation of tasks to be performed and the results to be accomplished under this Agreement, but not as to the means, methods, or sequence used by ODP for accomplishing such results. To the extent that ODP obtains permission to, and does, use City facilities, space, equipment , or support services in the performance of this Agreement, this use shall be at the ODP’s sole discretion based on the ODP’s determination that such use will promote ODP’s efficiency and effectiveness. Except as may be specifically provided elsewhere in this Agreement, the City does not require that ODP use City facilities, equipment, or support services or work in City locations in the performance of this Agreement.

Professional Services Agreement
Form approved by the City Attorney 5-11-20

c. If, in the performance of this Agreement, any third persons are employed by ODP, such persons shall be entirely and exclusively under the direct ion, supervision, and control of ODP.

Except as may be specifically provided elsewhere in this Agreement, all terms of employment, including hours, wages, working conditions, discipline, hiring, and discharging, or any other terms of employment or requirements of law, shall be determined by ODP. It is further understood and agreed that ODP shall issue W-2 or 1099 Forms for income and employment tax purposes, for all of ODP’s assigned personnel and subcontractors.

d. The provisions of this Section 8 shall survive any expiration or termination of this Agreement. Nothing in this Agreement shall be construed to create an exclusive relationship between City and ODP. ODP may represent, perform services for, or be employed by such additional persons or companies as ODP sees fit.

9. ADDITIONAL SERVICES

Changes to the Scope of Services shall be by written amendment to this Agreement and rates set forth in Exhibit B, or paid as otherwise agreed upon by the parties in writing prior to the provision of any such additional services.

10. SUCCESSORS AND ASSIGNS

City and ODP each binds itself, its partners, successors, legal representatives , and assigns to the other party to this Agreement and to the partners, successors, legal representatives, and assigns of such other party in respect of all promises and agreements contained herein.

11. TERM, SUSPENSION, TERMINATION

a. This Agreement shall become effective on the date that it is made, set forth on the first page of the Agreement, and shall continue in effect until both parties have fully performed their respective obligations under this Agreement, unless sooner terminated as provided herein.

b. City shall have the right at any time to temporarily suspend ODP ’s performance hereunder, in whole or in part, by giving a written notice of suspension to ODP. If City gives such notice of suspension, ODP shall immediately suspend its activities under this Agreement, as specified in such notice.

c. Either party shall have the right to terminate this Agreement for convenience at any time by giving thirty (30) days written notice of termination tothe other party. Upon such termination by City , ODP shall submit to City an itemized statement of services performed as of the date of termination in accordance with Section 2 of this Agreement. These services may include both completed work and work in progress at the time of termination. City shall pay ODP for any services for which compensation is owed; provided, however, City shall not in any manner be liable for lost profits that might have been made by ODP had the Agreement not been terminated or had ODP completed the services required by this Agreement. ODP shall promptly deliver to City all documents related to the performance of this Agreement in its possession or control. All such documents shall be the property of City without additional compensation to ODP.

Professional Services Agreement
Form approved by the City Attorney 5-11-20

12. TIME OF PERFORMANCE

The services described herein shall be provided during the period, or in accordance with the schedule, set forth in Exhibit A. ODP shall complete all the required services and tasks and complete and tender all deliverables to the reasonable satisfaction of City, not later than __________________.

13. STANDARD OF PERFORMANCE

ODP shall perform all services performed under this Agreement in the manner and according to the standards currently observed by a competent practitioner of Consultant's profession in . All products of whatsoever nature that ODP delivers to City shall be prepared in a professional manner and conform to the standards of quality normally observed by a person currently practicing in ODP’s profession. , and shall be provided in accordance with any schedule of performance. ODP shall assign only competent personnel to perform services under this Agreement. ODP shall notify City in writing of any changes in ODP’s staff assigned to perform the services under this Agreement prior to any such performance. In the event that City, at any time, desires the removal of any person assigned by ODP to perform services under this Agreement, because City, in its sole discretion, determines that such person is not performing in accordance with the standards required herein, ODP shall remove such person immediately upon receiving notice from City of the desire of City for the removal of such person.

14. CONFLICTS OF INTEREST

ODP covenants that neither it, nor any officer or principal of its firm, has or shall acquire any interest, directly or indirectly, that would conflict in any manner with the interests of City or that would in any way hinder ODP’s performance of services under this Agreement. ODP further covenants that in the performance of this Agreement, no person having any such interest shall be employed by it as an officer, employee, agent or subcontractor, without the written consent of City. ODP agrees to avoid conflicts of interest or the appearance of any conflicts of interest with the interests of City at all times during the performance of this Agreement.

15. CONFLICT OF INTEREST REQUIREMENTS

a. Generally. The City’s Conflict of Interest Code requires that individuals who qualify as "consultants" under the Political Reform Act, California Government Code sections 87200 et seq., comply with the conflict of interest provisions of the Political Reform Act and the City’s Conflict of Interest Code, which generally prohibit individuals from making or participating in the making of decisions that will have a material financial effect on their economic interests. The term "____________" generally includes individuals who make governmental decisions or who serve in a staff capacity.

b. Conflict of Interest Statements . The individual(s) who will provide services or perform work pursuant to this Agreement are "consultants" within the meaning of the Political Reform Act and the City’s Conflict of Interest Code:
____ yes X no (check one)

Professional Services Agreement
Form approved by the City Attorney 5-11-20

16. CONFIDENTIALITY OF CITY INFORMATION

During performance of this Agreement, ODP may gain access to and use City information regarding inventions, machinery, products, prices, apparatus, costs, discounts, future plans, business affairs, governmental affairs, processes, trade secrets, technical matters, systems, facilities, customer lists, product design, copyright, data, and other vital information (hereafter collectively referred to as "City Information") that are valuable, special , and unique assets of the City. ODP agrees to protect all City Information and treat it as strictly con fidential, and further agrees that ODP shall not at any time, either directly or indirectly, divulge, disclose, or communicate in any manner any City Information to any third party without the prior written consent of City. In addition, ODP shall comply w ith all City policies governing the use of the City network and technology systems. A violation by ODP of this Section 16 shall be a material violation of this Agreement and shall justify legal and/or equitable relief.

17. ODP INFORMATION

a. City shall have full ownership and control, including ownership of any copyrights, of all information prepared, produced, or provided by ODP pursuant to this Agreement. In this Agreement, the term "information" shall be construed to mean and include: any and all work product, submittals, reports, plans, specifications, and other deliverables consisting of documents, writings, handwritings, typewriting, printing, photostatting, photographing, computer models, and any other computerized data and every other means of recording any form of information, communications, or representation, including letters, works, pictures, drawings, sounds, or symbols, or any combination thereof. ODP shall not be responsible for any unauthorized modification or use of such information for other than its intended purpose by City.

b. ODP shall fully defend, indemnify and hold harmless City, its officers and employees, and each and every one of them, from and against any and all claims, ac tions, lawsuits or other proceedings alleging that all or any part of the information prepared, produced, or provided by ODP pursuant to this Agreement infringes upon any third party’s trademark, trade name, copyright, patent or other intellectual property rights. City shall make reasonable efforts to notify ODP not later than ten (10) days after City is served with any such claim, action, lawsuit or other proceeding, provided that City’s failure to provide such notice within such time period shall not rel ieve ODP of its obligations hereunder, which shall survive any termination or expiration of this Agreement.

c. All proprietary and other information received from ODP by City, whether received in connection with ODP’s proposal, will be disclosed upon receipt of a request for disclosure, pursuant to the California Public Records Act; provided, however, that, if any information is set apart and clearly marked "trade secret" when it is provided to City, City shall give notice to Consultant of any request for the disclosure of such information. ODP shall then have five (5) days from the date it receives such notice to enter into an agreement with the City, satisfactory to the City Attorney, providing for the defense of, and complete indemnification and reimbursement for all costs (including plaintiff’s attorney s’ fees) incurred by City in any legal action to compel the disclosure of such information under the California Public Records Act. ODP shall have sole responsibility for defense of the actual "trade secret " designation of such information.

Professional Services Agreement
Form approved by the City Attorney 5-11-20

d. The parties understand and agree that any failure by ODP to respond to the notice provided by City and/or to enter into an agreement with City, in accordance with the provisions of subsection c, above, shall constitute a complete waiver by ODP of any rights regarding the information designated "trade secret" by ODP, and such information shall be disclosed by City pursuant to applicable procedures required by the Public Records Act.

18. MISCELLANEOUS

a. Entire Agreement. This Agreement contains the entire agreement between the parties.

Any and all verbal or written agreements made prior to the date of this Agreement are superseded by this Agreement and shall have no further effect.

b. Modification. No modification or change to the terms of this Agreement will be binding on a party unless in writing and signed by an authorized representative of that party.

c. Compliance with Laws. ODP shall perform all services described herein in compliance with all applicable federal, state and local laws, rules, regulations, and ordinances, including to the extent applicable, but not limited to: (i) the Americans with Disabilities Act of 1990 (42 U.S.C. 12101, et seq.) ("ADA"), and any regulations and guidelines issued pursuant to the ADA; and (ii) applicable Labor Code sections 1720, et seq. , which require prevailing wages (in accordance with DIR determinations at www.dir.ca.gov) be paid to any employee performing work covered by Labor Code sections 1720 et seqpprovisions. pprovisions. ODP shall pay to the City when due all business taxes payable by ODP under the provisions of Chapter 6-04 of the Santa Rosa City Code. The City may deduct any delinquent business taxes, and any penalties and interest added to the delinquent taxes, from its payments to ODP.

d. Discrimination Prohibited. With respect to the provision of services under this Agreement, ODP agrees not to discriminate against any person because of the race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age, sexual orientation, or military and veteran status of that person.

e. Governing Law; Venue. This Agreement shall be governed, construed, and enforced in accordance with the laws of the State of California. Venue of any litigation arising out of or connected with this Agreement shall lie exclusively in the state trial court in Sonoma County in the State of California , and the parties consent to jurisdiction over their persons and over the subject matter of any such litigation in such court, and consent to service of process issued by such court.

f. Waiver of Rights. Neither City acceptance of, or payment for, any service or performed by ODP, nor any waiver by either party of any default, breach or condition precedent, shall be construed as a waiver of any provision of this Agreement, nor as a waiver of any other default, breach or condition precedent or any other right hereunder.

g. Incorporation of Attachments and Exhibits. The attachments and exhibits to this Agreement a re incorporated and made part of this Agreement, subject to terms and provisions

Professional Services Agreement
Form approved by the City Attorney 5-11-20

herein contained.

19. AUTHORITY; SIGNATURES REQUIRED FOR CORPORATIONS

ODP hereby represents and warrants to City that it is (a) a duly organized and validly existing limited liability company, formed and in good standing under the laws of the State of Delaware, (b) has the power and authority and the legal right to conduct the business in which it is currently engaged, and (c) has all requisite power and authority and the legal right to consummate the transactions contemplated in this Agreement. ODP hereby further represents and warrants that this Agreement has been duly authorized, and when executed by the signatory or signatories listed below, shall constitute a valid agreement binding on ODP in accordance with the terms hereof.

If this Agreement is entered into by a corporation, it shall be signed by one corporate officers, one from each of the following two groups: a) the chairman of the board, president or any vice- president; b) the secretary, any assistant secretary, chief financial officer, or any assistant treasurer. The title of the corporate officer shall be listed under the signature.

20. COUNTERPARTS AND ELECTRONIC SIGNATURES

This Agreement and future documents relating thereto may be executed in two or more counterparts, each of which will be deemed an original and all of which together constitute one Agreement. Counterparts and/or signatures delivered by facsimile, pdf or City-approved electronic means have the same force and effect as the use of a manual signature. Both City and ODP wish to permit this Agreement and future documents relating thereto to be electronically signed in acco rdance with applicable federal and California law. Either Party to this Agreement may revoke its permission to use electronic signatures at any time for future documents by providing notice pursuant to the Agreement.

The Parties agree that electronic signatures, by their respective signatories are intended to authenticate such signatures and to give rise to a valid, enforceable, and fully effective Agreement. The City reserves the right to reject any signature that cannot be positively verified by the Cit y as an authentic electronic signature.

Executed as of the day and year first above stated.

Name of Firm:_ODP BUSINESS SOLUTIONS,
LLC

TYPE OF BUSINESS ENTITY (check one):

_____ Individual/Sole Proprietor
_____Partnership
_____Corporation
__X__ Limited Liability Company
_____ Other (please specify: ___________)

Signatures of Authorized Persons:

CITY OF SANTA ROSA
a Municipal Corporation

By:________________________________

Print
Name:_____________________________

Title:_______________________________

Professional Services Agreement
Form approved by the City Attorney 5-11-20

By: _____________________________
Glenn Brower, Vice President
Print Name: Glenn Brower

Title: Vice President

City of Santa Rosa Business Tax Cert. No.

__________________________________
APPROVED AS TO FORM:

____________________________
Office of the City Attorney
ATTEST:

____________________________
City Clerk

Attachments:

Attachment One - Insurance Requirements
Exhibit A - Scope of Services
Exhibit B – Compensation

ODP Business Solutions, LLC

Exhibit A – Scope of
Services

RFP 23-07 Storage Area Network (SAN) Systems Update

Storage System Network and Components: ODP Business Solutions presents the Exhibit A scope of services per our response proposal.
6600 N Military Trail, Boca Raton, FL 33496

ODP Business Solutions, LLC
City of Santa Rosa 2 May 22, 2023
Exhibit A-Confidential

Scope of Services
ODP Business Solutions will be supporting the coordination of Lenovo Services as per the RFP 23-07 submission to deliver and deploy all products and services from Lenovo USA.

1. Contract Management and Project Oversight
a. Executing project requirements and elements with Lenovo team b. Lenovo Professional Services will perform the workstreams noted in 2-6 herein during 9 a.m. to 5 p.m. local time, Monday to Friday, excluding public and Lenovo holidays. c. Engagement with City of Santa Rosa, coordination with City Key personnel and end users, billing and invoicing, and escalation and resolution for customer satisfaction

2. Remote workstreams:
a. Review the DM solution design with the Customer.
b. Collaborate with the Customer to complete the DM deployment worksheet. c. Review and agree together on the knowledge transfer curriculum. d. Review and agree together on the DM fault injection exercise.

3. Onsite workstreams:
a. Perform physical installation of the two DM units (DM7100F and DM240N). b. Assess the storage firmware and if necessary, update it to the latest Lenovo best recipe. c. Configure the DM units in accordance with the approved deployment worksheet. d. Install and configure an instance of XClarity Administrator and inject the DM solution into its management domain for system monitoring.
e. Perform a fault injection exercise against the DM solution in accordance with the fault injection plan.
f. Provide to the Customer online pdf materials from Lenovo Support for operation and administration of the DM solution.
g. Provide knowledge transfer via verbal communications, product demonstrations and hands on activities against the agreed upon knowledge transfer curriculum. The knowledge transfer sessions will be two 4 hour sessions across two consecutive business days onsite for up to 4 Customer team members. If necessary, a third session of up to 2 hours via remote meeting tool after the conclusion of the onsite deployment phase.

4. Fundings:

The following Lenovo part numbers are used in support of the above workstreams and are specifically captured on pricing proposals.

ODP Business Solutions, LLC
City of Santa Rosa 3 May 22, 2023
Exhibit A-Confidential
i
. 1 x p/n 5AS7A83056
ii. 1 x p/n 5AS7A83040
iii. 1 x p/n 5MS7A24102
iv. 9 x p/n 5MS7A35284

5. Flows:
a. Upon Lenovo receiving the purchase order containing all the above part numbers, from ODP Business Solutions. Lenovo will assign the Consultant’s and send out the final Statement of Work to the Customer for review and signature.
b. Lenovo will coordinate a Project Kick-Off meeting to introduce the Lenovo team member(s) on this project.
c. Lenovo will coordinate subsequent pre-deployment meetings to work on the remote workstreams.
d. When all the hardware is onsite and the Customer datacenter is ready (network drops, network switches, power, rack space), then Lenovo will coordinate with the Customer for the onsite work schedule.

6. Hardware Architecture Design Build and System Testing: 50TB System. a. See Technical Report for 50TB and hardware architecture design in following pages. © 2023 Lenovo, Inc. All rights reserved.

TA

BLE OF CONTENTS
1 Business Requirements ....................................................................................................................... 2 2 Solution Summary ................................................................................................................................ 2

2.1 Proposed Solution Summary .......................................................................................................................... 2 3 Solution Details ..................................................................................................................................... 3

3.1 System Details ................................................................................................................................................ 3

3.2 Environmental Details ..................................................................................................................................... 3

3.3 Aggregate Details: lenovo1/lenovo2 ............................................................................................................... 4

3.4 Drive Calculation Summary ............................................................................................................................. 4

3.5 Workload Descriptions .................................................................................................................................... 5

3.6 Workload Aggregate Assignments .................................................................................................................. 5 4 Copyright ............................................................................................................................................... 6 Lenovo Solution Technical Report – 50TB**
Manually Designed Solution
Report Generated:
23-Feb-2023
Project ID:
f4b54528
**Confidential – not for Public Disclosure.
© 2023 Lenovo, Inc. All rights reserved.
1 Business Requirements
[REQUEST FOR PROPOSALS (RFP) 23-07Storage Area Network (SAN) System Update] 2 Solution Summary

2.1 Proposed Solution Summary
This is a summary of what the proposed solution will deliver.

THROUGHPUT
10,000 IOPS / 78.13 MB/s

AVERAGE UTILIZATION
4%
MAXIMUM THROUGHPUT*
313,901 IOPS / 2,452.36 MB/s
* assumes best practice
configuration of aggregates and
workload to aggregate mapping

RAW CAPACITY

92.16 TB

USABLE CAPACITY

56.09 TiB
RAW CAPACITY HEADROOM**
645.12 TB
** assumes future expansion using
drives of same capacity
STORAGE EFFICIENCY***

1.5 : 1
EFFECTIVE CAPACITY***

84.1396 TiB

USABLE VS EFFECTIVE

56.09 TiB

84.1396 TiB
*** assumes use of storage efficiency
technologies like compression and
deduplication
*** Lowest efficiencies have been
applied to unused capacity within the
cluster.

Note: Fusion calculates and reports usable and effective capacity in base-2 format which aligns with values reported in ONTAP CLI as well as System Manager and Unified Manager. It should be noted that ONTAP CLI, System Manager and Unified Manager display base-2 capacity values, but labels these values using base-10 descriptors (e.g. GB/TB/PB).

CONFIGURATION
Model: DM7100F-HA Ethernet
Bundle
Onboard
Ethernet Ports:
25GbE (8)
40GbE (4)
Nodes: 2 Onboard UTA2
Ports:
0 Total
Drives:
12 Onboard SAS
Ports:
8 Drive Type: 7.68TB NVMe SSD Expansion
Slots:
10 Cluster
Switches:

N/A Stge Switches: N/A

ENVIRONMENTAL
Rack Units: 6 U
System Weight: 167.77 lbs
AC Power: 1738.00 W
Current Draw: 17.64 A
BTU/hr: 5934.00

© 2023 Lenovo, Inc. All rights reserved.

3 Solution Details

3.1 System Details
For rack elevation, please refer to the Storage Solution Visio Diagram cluster1: lenovo1/lenovo2
Bill Of Materials Total
Description Part Number Qty
Systems
DM7100F-HA Ethernet
Bundle 9.11.1 ONTAP 1
Grand Total 1
Storage

DM240N w/ 12x7.68TB NVMe SSD NOFRU_7.6TB_SED_NV
Me_DM240N 1
Grand Total 1
Adapter Cards/ Flash Cache
Grand Total 0

3.2 Environmental Details

Line Voltage: 110
System
Components Qty Rack
Units
Current
(Amps)
AC Power
(Watts)
AC Power
(VA)
Thermal Rating
(BTU/hr)
Power
(kWh/year)
Typical Worst Typical Worst Typical Worst Typical Worst Typical Worst DM7100F-HA
Ethernet
Bundle
(2xControllers
, 1xChassis)
1 4 12.83 16.12 1,257 1,579 1,323.16 1,662.11 4,291 5,389 11,018.86 13,841.51 DM240N w/
12x7.68TB
NVMe SSD
1 2 4.81 7.53 481 753 506.32 792.63 1,643 2,572 4,216.45 6,600.8 Total 2 6 17.64 23.65 1,738 2,332 1,829.48 2,454.74 5,934 7,961 15,235.31 20,442.31

© 2023 Lenovo, Inc. All rights reserved.

3.3 Aggregate Details: lenovo1/lenovo2
This configuration leverages the Root-Data-Data partitioning which creates one small root partition (P3) for the root aggregates and two larger equally sized partitions (P1 and P2) for data aggregates. Up to 48 drives are partitioned in this format when ONTAP first initializes. The partition sizes and number of partitions are dependent on the number of drives installed when ONTAP first initializes.

3.4 Drive Calculation Summary
Node Drives
(Qty) (#Partitions,
#Non-Partitioned)
Flash Pool Drives
(Qty) (#Partitions,
#Non- Partitioned)
Aggregates
(Qty)
Space
Utilization
lenovo1 (16, 0) (0, 0) 2 59.08%
lenovo2 (16, 0) (0, 0) 2 59.08%
Root Aggrs Node Devices Total Data Parity RAID/Size Reserve (TiB)
WAFL
(TiB)
Parity
(TiB)
Root
(TiB)
lenovo1_root lenovo1 62.35GiB P3
Partition
5 3 2 RAID_DP/5 0.0000 0.0183 0.1217 0.1644
lenovo2_root lenovo2 62.35GiB P3
Partition
5 3 2 RAID_DP/5 0.0000 0.0183 0.1217 0.1644
10 6 4 Totals 0.0000 0.0366 0.2434 0.3288
Data Aggrs Node Devices Total Data Parity RAID/Size Reserve (TiB)
WAFL
(TiB)
Parity
(TiB)
Usable
(TiB)
lenovo1_aggr1 lenovo1 3.46TiB P1
Partition
11 9 2 RAID_DP/11 0.0000 3.1163 6.9251 28.0465
lenovo2_aggr1 lenovo2 3.46TiB P2
Partition
11 9 2 RAID_DP/11 0.0000 3.1163 6.9251 28.0465
22 18 4 Totals 0.0000 6.2326 13.8502 56.0930
Spares Devices Total Capacity
(TiB)
Root 62.35GiB P3 Partition 2 0.1218
Data 3545.66GiB P1 Partition 1 3.4626
Data 3545.66GiB P2 Partition 1 3.4626
Total 7.0470
Capacity
(TiB)
Allocation
Drive Formatting 0.0038 0%
Root 0.3288 0.39%
Parity 14.0936 16.81%
WAFL 6.2692 7.48%
Reserve 0.0000 0%
Spare 7.0470 8.41%
Usable 56.0930 66.9%
Total 83.8354 100.0%
© 2023 Lenovo, Inc. All rights reserved.

3.5 Workload Descriptions
IO Percentages IO Block Sizes (KB)
Workload
Name
Workload
Type
Throughp
ut
Effective
Capacity
(TiB)
Proto
col
Read
Laten
cy(MS)
Rand
Read
Rand
Write
Seq
Read
Seq
Write
Rand
Read
Rand
Write
Seq
Read
Seq
Write
Work
ing
Set %
workload 1 Custom 10,000.00
IOPS

50.00 NFS 1 80 20 0 0 8 8 32 32 5

3.6 Workload Aggregate Assignments
Node Aggregate Workload Workload Type
lenovo1 lenovo1_aggr1 workload 1 custom
lenovo2 lenovo2_aggr1 workload 1 custom

4 Copyright
R
efer to the Interoperability Matrix on the Lenovo Support site (Navigate to Data Center Storage, Lenovo Storage, Applicable DM-Series Product, Documentation, Interoperability Matrix – User Guides checkbox) to validate that the exact product and feature versions described in this document are supported for your specific environment. The Lenovo Interoperability Matrix defines the product components and versions that can be used to construct configurations that are supported by Lenovo. Specific results depend on each customer’s installation in accordance with published specifications.

Copyright Information
Copyright © 2023 Lenovo. All rights reserved. Printed in the U.S. No part of this document covered by copyright may be reproduced in any form or by any means -graphic, electronic, or mechanical, including photocopying, recording, taping, or storage in an electronic retrieval system without prior written permission of the copyright owner.

Software derived from copyrighted Lenovo material is subject to the following license and disclaimer:

THIS SOFTWARE IS PROVIDED BY LENOVO “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL LENOVO BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR

BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Lenovo reserves the right to change any products described herein at any time, and without notice. Lenovo assumes no responsibility or liability arising from the use of products described herein, except as expressly agreed to in writing by Lenovo. The use or purchase of this product does not convey a license under any patent rights, trademark rights, or any other intellectual property rights of Lenovo.

The product described in this manual may be protected by one or more U.S. patents, foreign patents, or pending applications.

RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.277-7103 (October 1988) and FAR 52-227-19 (June 1987).

Trademark Information
LENOVO, the LENOVO logo, and the marks listed at https://www.lenovo.com/us/en/legal/copytrade/ are trademarks of Lenovo. Other company and product names may be trademarks of their respective owners. © 2023 Lenovo, Inc. All rights reserved.

Lenovo ThinkSystem DM7100F Unified All Flash
Storage Array
Product Guide
Lenovo ThinkSystem DM7100F is a scalable, unified, all flash storage system that is designed to provide high performance, simplicity, capacity, security, and high availability for large enterprises. Powered by the ONTAP software, ThinkSystem DM7100F delivers enterprise-class storage management capabilities with a wide choice of host connectivity options, flexible drive configurations, and enhanced data management features, including end-to-end NVMe support (NVMe over Fabrics and NVMe drives). The DM7100F is a perfect fit for a wide range of enterprise workloads, including big data and analytics, artificial intelligence, engineering and design, hybrid clouds, and other storage I/O-intensive applications.

The ThinkSystem DM7100F 4U controller enclosure is shown in the following figure.

Figure 1. Lenovo ThinkSystem DM7100F
Up to 12 DM7100F Storage Arrays can be combined into a clustered system in a NAS environment, or up to 6 DM7100F Storage Arrays can be combined into a clustered system in a SAN environment.

Did you know?
The ThinkSystem DM7100F offers end-to-end NVMe storage connectivity with NVMe over Fabrics (NVMeOF) and NVMe drives by implementing NVMe/FC with 32 Gb Fibre Channel host interfaces.

A single ThinkSystem DM7100F scales up to 7.37 PB of raw storage capacity. A cluster of the DM7100F storage systems scales up to 88.4 PB for NAS or up to 44.2 PB for SAN environments.

The ThinkSystem DM7100F offers unified file and block storage connectivity, and it supports multiple storage protocols simultaneously with a choice of 1/10 GbE, 25 GbE, and 40/100 GbE NAS and iSCSI, 8/16/32 Gb Fibre Channel, and 32 Gb NVMe/FC.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 1 Key features
A single ThinkSystem DM7100F Storage Array consists of the 4U rack-mount controller enclosure and one or more expansion enclosures. The controller enclosure includes two controllers, 256 GB RAM (128 GB RAM per controller), and 32 GB battery-backed NVRAM (16 GB NVRAM per controller). 25 GbE SFP28 NAS/iSCSI or 4/8/16 Gb Fibre Channel (FC) ports on the controller's mezzanine cards provide base host connectivity, with adapter card options for additional 1/10 GbE, 25 GbE, or 40/100 GbE NAS/iSCSI, 8/16/32 Gb FC, or 32 Gb NVMe/FC connections. The attachment of the Lenovo ThinkSystem DM240N 2U24 SFF and DM240S 2U24 SFF Expansion Enclosures to the controller enclosure provides scalability up to 48 NVMe and 432 SAS SFF solid-state drives (SSDs), or up to 480 SAS SSDs.

The ThinkSystem DM7100F Unified All Flash Array offers the following key features and benefits:

All-flash array capabilities with end-to-end NVMe to meet the demand for higher storage performance at lower latency and provide higher IOPs and bandwidth with lower power usage and total cost of ownership than hybrid or HDD-based solutions.

NVMe and SAS drive-side connectivity with up to 24x 2.5-inch small form factor (SFF) drives in the 2U24 SFF expansion enclosures.

Scalability to up to 48 NVMe and 432 SAS, or 480 SAS SFF solid-state drives with the attachment of the ThinkSystem DM240N 2U24 SFF and DM240S 2U24 SFF expansion enclosures to satisfy growing needs for storage performance and capacity.

Scalable, all flash storage with dual active/active controller configurations for high availability and performance.

Improved performance and data protection with RAID-DP and RAID-TEC, as well as support for traditional RAID 4.

Flexible host connectivity to match diverse customer needs with support for unified NAS and SAN storage protocols, including 1/10 GbE, 25 GbE, and 40/100 GbE NAS and iSCSI, 8/16/32 Gb Fibre Channel, and 32 Gb NVMe over Fibre Channel (NVMe/FC) connectivity.

Rich set of standard storage management functions available at no extra cost, including snapshots, volume copy, quality of service, thin provisioning, compression, deduplication, encryption, disk-based backup, application- and virtual machine-aware backup, quick data recovery, clustering, synchronous replication, and asynchronous replication.

Optional licensed functions, including WORM (write once, read many) data protection (SnapLock) and automated tiering of data from high-performance SSDs to object storage in public or private clouds (FabricPool).

Scale-out clustering of up to 12 ThinkSystem DM Series storage systems for NAS connectivity or up to six DM Series storage systems for SAN connectivity.

Intuitive, web-based GUI for easy system setup and management.

Lenovo XClarity support for centralized systems management of Lenovo x86 servers, switches, and storage, which provides automated agent-less discovery, inventory, monitoring, and additional platform-specific functions across multiple systems.

Designed for 99.9999% availability with redundant hot-swap components, including controllers and I/O modules, power supplies, system fans (4U controller enclosures), and non-disruptive firmware upgrades.

Certified storage for Oracle VM
Certified storage for Citrix XenServer
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 2 The DM7100F controller enclosure supports attachment of up to two ThinkSystem DM240N 2U24 SFF NVMe and up to 18 DM240S 2U24 SFF SAS expansion enclosures, or up to 20 DM240S 2U24 SFF SAS expansion enclosures. The following SFF drives are supported:

1.92 TB and 3.84 TB NVMe hot-swap SSDs.

1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB NVMe hot-swap SSD SEDs. 960 GB, 3.84 TB, 7.68 TB, and 15.36 TB 12 Gbps SAS hot-swap SSDs.

More drives and expansion enclosures are designed to be dynamically added with virtually no downtime, which helps to quickly and seamlessly respond to ever-growing capacity demands.

The ThinkSystem DM7100F Unified All Flash Array offers high levels of system and data availability with the following technologies:

Dual-active controllers (high availability pair) with automatic load balancing and failover Mirrored, battery-backed controller NVRAM*
Automatic drive failure detection and rebuild
Redundant, hot-swappable and customer replaceable hardware components, including SFP+/QSFP+ transceivers, controller and I/O modules, power supplies, system fans (4U controller enclosure), and drives
Automated failover for the data path between the host and the drives with multipathing Non-disruptive controller and drive firmware upgrades
Scale-out clustering
*NVRAM is battery-backed memory used to protect inbound writes as they arrive. This fact allows write operations to be safely acknowledged without having to wait for a disk operation to complete, greatly reducing write latency.

Components and connectors
The following figure shows the front of the ThinkSystem DM7100F 4U controller enclosure without a front bezel.

Figure 2. ThinkSystem DM7100F 4U controller enclosure front view The front of the ThinkSystem DM7100F controller enclosure includes the following components:
8x Redundant hot-swap system fans.

Enclosure status LEDs.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 3 The following figures show the rear of the ThinkSystem DM7100F 4U controller enclosure.

Figure 3. ThinkSystem DM7100F 4U controller enclosure rear view: Ports Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 4 Figure 4. ThinkSystem DM7100F 4U controller enclosure rear view: Slots Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 5 The rear of the ThinkSystem DM7100F 4U controller enclosure includes the following components:

Two redundant hot-swap controllers, each with the following ports:

Two 25 GbE SFP28 ports for direct-attach HA pair interconnect.

Two 40/100 GbE QSFP28 onboard ports for connections to the NVMe expansion enclosures.

Two 40/100 GbE QSFP28 ports on the SmartIO adapter in Slot 3 for direct-attach or switched cluster interconnect.

Four 12 Gb SAS x4 ports (Mini-SAS HD SFF-8644) for connections to the SAS expansion enclosures.

A mezzanine slot for one of the following mezzanine cards (a mezzanine card is required):

Four 25 GbE SFP28 host ports (NAS or iSCSI).

Four 4/8/16 Gb FC SFP+ host ports (FC only).

Four slots for the following optional adapter cards (ports per adapter card):

Host ports:

Two 1/10 GbE RJ-45 host ports (NAS or iSCSI).

Four 10 GbE SFP+ host ports (NAS or iSCSI).

Two 25 GbE SFP28 host ports (NAS or iSCSI).

Two 40/100 GbE QSFP28 host ports (NAS or iSCSI).

Four 8/16/32 Gb FC SFP+ host ports (FC or 32Gb NVMe/FC).

Expansion ports:

Two 100 GbE QSFP28 expansion ports (NVMe/RoCE).

Four 12 Gb SAS x4 expansion ports (Mini-SAS HD SFF-8644).

MetroCluster ports:

Two 4/8/16 Gb FC SFP+ MetroCluster FC ports (planned for the future).

Two 40/100 GbE iWARP QSFP28 MetroCluster IP ports.

One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.

Two serial console ports (RJ-45 and Micro-USB) for another means to configure the system.

One USB Type A port (read-only) for software updates.

Four redundant hot-swap 1600 W (100 - 240 V) AC power supplies (IEC 320-C14 power connector) with integrated cooling fans.

Controller status LEDs.

The following figure shows the front of the ThinkSystem DM240N 2U SFF NVMe expansion enclosure.

Figure 5. ThinkSystem DM240N 2U SFF NVMe expansion enclosure front view The front of the ThinkSystem DM240N 2U SFF NVMe expansion enclosure includes the following components:
24 SFF hot-swap drive bays.

Enclosure status LEDs.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 6 Enclosure ID LED.

The following figure shows the rear of the ThinkSystem DM240N 2U SFF NVMe expansion enclosure.

Figure 6. ThinkSystem DM240N 2U SFF NVMe expansion enclosure rear view The rear of the ThinkSystem DM240N 2U SFF NVMe expansion enclosure includes the following components:

Two redundant hot-swap NVMe I/O Modules; each NVMe I/O Module provides two 100 GbE QSFP28 expansion ports for connections to the controller enclosures.

Two redundant hot-swap 1600 W (100 - 240 V) AC power supplies (IEC 320-C14 power connector) with integrated cooling fans.

NVMe I/O Module status LEDs.

The following figure shows the front of the ThinkSystem DM240S 2U SFF SAS expansion enclosure.

Figure 7. ThinkSystem DM240S 2U SFF SAS expansion enclosure front view The front of the ThinkSystem DM240S 2U SFF SAS expansion enclosure includes the following components:
24 SFF hot-swap drive bays.

Enclosure status LEDs.

Enclosure ID LED.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 7 The following figure shows the rear of the ThinkSystem DM240S 2U SFF SAS expansion enclosure.

Figure 8. ThinkSystem DM240S 2U SFF SAS expansion enclosure rear view The rear of the ThinkSystem DM240S 2U SFF SAS expansion enclosure includes the following components:

Two redundant hot-swap I/O Modules; each I/O Module provides four 12 Gb SAS x4 expansion ports (Mini-SAS HD SFF-8644) for connections to the controller enclosures and for connecting the expansion enclosures between each other.

Two redundant hot-swap 913 W (100 - 240 V) AC power supplies (IEC 320-C14 power connector) with integrated cooling fans.

I/O Module status LEDs.

System specifications
The following table lists the ThinkSystem DM7100F Unified All Flash Array storage system specifications.

Note:

The supported hardware options, software features, and interoperability listed in this product guide are based on the ONTAP software version 9.7. For details about specific software releases that introduced support for certain hardware options and software features, refer to the Change History for the particular software release for the ThinkSystem DM7100F Unified All Flash Array that can be found at:
http://datacentersupport.lenovo.com
Table 1. ThinkSystem DM7100F system specifications
Attribute
Specification
Form factor
DM7100F controller enclosure (machine type 7D25): 4U rack mount.

DM240N 2U24 SFF expansion enclosure (machine type 7Y62): 2U rack mount.

DM240S 2U24 SFF expansion enclosure (machine types 7Y58, 7D7Y): 2U rack mount.

Controller
configuration
Dual active-active controller configuration (HA pair). Up to 6 HA pairs can be combined into a single SAN cluster, or up to 12 HA pairs can be combined into a single NAS cluster.

HA pair
interconnect ports
4x 25 GbE SFP28 onboard ports (DAC cables) (2 ports per controller).

Cluster
interconnect ports
4x 100 GbE QSFP28 ports (DAC cable or SW fiber optic cable, MPO) (2 ports per controller on the pre-installed SmartIO adapter cards).

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 8 MetroCluster
connectivity
MetroCluster IP: 4x 40/100 GbE QSFP28 ports (SW fiber optic cable, MPO) (2 ports per controller on the optional 100 GbE iWARP adapter cards). (requires ONTAP 9.8 or later)
MetroCluster FC: 4x 4/8/16 Gb FC SFP+ ports (SW fiber optic cable, LC) (2 ports per controller on the optional 16 Gb FC-VI adapter cards).

RAID levels
RAID-4, RAID-DP, RAID-TEC.

Note:

RAID-4 can be configured only through the CLI.

Controller
memory
256 GB RAM per system (128 GB per controller). 32 GB battery-backed NVRAM per system (16 GB per controller) mirrored between the controllers.

Drive bays
Up to 480 SFF hot-swap drive bays:

Up to 48 NVMe and up to 432 SAS (Up to two 2U24 NVMe and up to 18 2U24 SAS expansion enclosures); or
Up to 480 SAS (Up to 20 2U24 SFF SAS expansion enclosures).

Drive technology
NVMe SSDs, SAS SSDs.

Drive expansion
connectivity
2x 100 GbE QSFP28 onboard expansion ports and 2x 100 GbE QSFP28 additional expansion ports with one 100 GbE adapter card on each of two controllers in the controller enclosure for the attachment of the NVMe expansion enclosures. 2x 100 GbE QSFP28 expansion ports on each of two NVMe I/O modules in the NVMe expansion enclosure for the attachment to the controller enclosure. 4x 12 Gb SAS x4 (Mini-SAS HD SFF-8644) base expansion ports and 4x or 8x 12 Gb SAS x4 (Mini-SAS HD SFF-8644) additional expansion ports with one or two SAS adapter cards on each of two controllers in the controller enclosure for the attachment of the SAS expansion enclosures.
4x 12 Gb SAS x4 (Mini-SAS HD SFF-8644) expansion ports on each of two SAS I/O modules in the SAS expansion enclosure for the attachment to the controller enclosure and daisy chaining of the expansion enclosures.

Drives

1.92 TB and 3.84 TB NVMe SSDs.

1.92 TB, 3.84 TB, 7.68 TB, and 15.36 TB NVMe SSD SEDs.
960 GB, 3.84 TB, 7.68 TB, and 15.36 TB SAS SSDs.

Storage capacity
Up to 7.37 PB (480x 15.36 TB SSDs).

Storage protocols
NAS (File access): NFS and CIFS/SMB.

SAN (Block access): iSCSI, FC, NVMe/FC.

Host connectivity
Base ports on the mezzanine cards (per controller enclosure):
8x 25 GbE SFP28 (DAC cable or SW fiber optic cable, LC) (4 ports per controller); or 8x 4/8/16 Gb FC SFP+ (SW fiber optic cable, LC) (4 ports per controller).

Optional additional ports on up to four pairs of the adapter cards (up to four adapter cards per controller) with the following ports per adapter card:
2x 1/10 GbE RJ-45 (UTP Category 6/6a cables).
4x 10 GbE SFP+ (DAC cables).
2x 25 GbE SFP28 (DAC cables or SW fiber optic cables, LC). 2x 40/100 GbE QSFP28 (DAC cables or SW fiber optic cables, MPO). 4x 8/16/32 Gb FC SFP+ host ports (SW fiber optic cables, LC).

Host operating
systems
Microsoft Windows Server 2012 R2, 2016, and 2019; Red Hat Enterprise Linux (RHEL) 6, 7, and 8; SUSE Linux Enterprise Server (SLES) 11, 12, and 15; VMware vSphere 6.0, 6.5, 6.7, and 7.0.

Note:

NVMe/FC is supported with RHEL 8 and SLES 15 only (see
Operating systems
for
specific version details).

Performance*
Up to 650 000 random read IOPS (8 KB blocks).

Attribute
Specification
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 9 Configuration
maximums**
Maximum raw storage capacity: 7.37 PB
Maximum aggregate size: 800 TB
Maximum number of FlexVol volumes per HA pair: 5000
Maximum FlexVol volume size: 100 TB
Maximum number of LUNs per HA pair: 24 576
Maximum number of LUNs per FlexVol volume: 512
Maximum LUN size: 16 TB
Maximum number of drives in a RAID group (data + parity drives):

RAID 4: 14 (13 + 1 SAS SSDs or NVMe SSDs)
RAID-DP: 28 (26 + 2 SAS SSDs or NVMe SSDs)
RAID-TEC: 29 (26 + 3 SAS SSDs or NVMe SSDs)
Maximum number of initiators per HA pair: 8192
Maximum number of snapshots per FlexVol volume: 1023
Cooling
Redundant cooling:

DM7100F 4U: Eight hot-swap system fans.

DM240N 2U24 SFF: Fans that are built into I/O modules and power supplies.

DM240S 2U24 SFF: Fans that are built into power supplies.

Power supply
Four 1600 W (100 - 240 V) (DM7100F 4U controller enclosure), or two 1600 W (100 - 240 V) (DM240N 2U24 SFF expansion enclosure), or two 913 W (100 - 240 V) (DM240S 2U24 SFF expansion enclosure) redundant hot-swap Platinum AC power supplies.

Hot-swap parts
Controllers, I/O modules, drives, system fans (DM7100 4U only), power supplies, and SFP+/SFP28/QSFP+/QSFP28 transceivers and DAC cables.

Management
ports
1x 1 GbE port (UTP, RJ-45) per controller for out-of-band management. 2x Serial console ports (RJ-45 and Micro-USB) for system configuration. 1x USB Type A port (read-only) for software updates.

Management
interfaces
ThinkSystem Storage Manager web-based GUI; SSH CLI; Serial console CLI; SNMP, email, and syslog alerts; optional Lenovo XClarity.

Security features
Secure Socket Layer (SSL), Secure Shell (SSH), user level security, role-based access control (RBAC), LDAP authentication.

Warranty and
support
Three- or five-year customer-replaceable unit and onsite limited warranty with selectable service levels: 9x5 coverage with next business day (NBD) parts delivered (base warranty), 9x5 coverage with NBD onsite response (Foundation Service), 24x7 coverage with 4-hour onsite response (Essential Service), or 24x7 coverage with 2-hour onsite response or 6-hour committed repair (select areas) (Advanced Service). Premier Support is also available.

Software support is included in the base warranty or Foundation, Essential, or Advanced Service for the duration of the warranty period.

Dimensions
4U controller enclosure:

Height: 175 mm (6.9 in.)
Width: 447 mm (17.6 in.)
Depth: 828 mm (32.6 in.)
2U24 SFF NVMe expansion enclosure:

Height: 87 mm (3.4 in.)
Width: 447 mm (17.6 in.)
Depth: 543 mm (21.4 in.)
2U24 SFF SAS expansion enclosure:

Height: 85 mm (3.4 in.)
Width: 449 mm (17.7 in.)
Depth: 484 mm (19.1 in.)
Weight
Controller enclosure (fully configured): 49.2 kg (108.5 lb) 2U24 SFF NVMe expansion enclosure (fully configured): 30.2 kg (66.7 lb) 2U24 SFF SAS expansion enclosure (fully configured): 24.4 kg (53.8 lb) Attribute
Specification
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 10 Attribute
Specification
* Estimated theoretical performance based on the capacity planning for specific configurations and workloads. ** For a detailed list of configuration limits and restrictions for a specific version of the software, refer to the Lenovo Data Center Support website:
http://datacentersupport.lenovo.com
Controller enclosures
Factory-integrated models of the ThinkSystem DM7100F Unified All Flash Array are configured by using the Lenovo Data Center Solution Configurator (DCSC):
http://dcsc.lenovo.com
The following table lists the CTO base models for the ThinkSystem DM7100F Unified All Flash Array.

Table 2. ThinkSystem DM7100F CTO base models
Description
Machine
Type/Model
Feature
code
Lenovo ThinkSystem DM7100F
7D25CTO1WW
B94E
Configuration note:

Two DM7100 controllers (feature code B94T) are pre-selected in the configurator.

The models of the ThinkSystem DM7100F ship with the following items:

One chassis with the following components:

Two controllers
Four power supplies
Rack Mount Kit
2 m USB Cable (USB Type A to Micro-USB)
Electronic Publications Flyer
Four customer-configured power cables
Controllers
The ThinkSystem DM7100F controller enclosure ships with two DM7100 controllers. A controller
provides
interfaces for host connectivity, management, and internal drives, and it runs ONTAP storage management software. Each ThinkSystem DM7100 controller enclosure provides 256 GB RAM and 32 GB battery- backed NVRAM (128 GB RAM and 32 GB NVRAM per controller).

The ThinkSystem DM7100F controller enclosures ship with four HA interconnect 25 GbE SFP28 ports (two ports per controller) to cable a directly-connected dual-controller HA pair, and four cluster interconnect 100 GbE QSFP28 ports (two ports on the 100 GbE SmartIO adapter card [feature code BAZ1] installed in the Slot 3 on each of the DM7100 controllers) to cable a directly connected (one HA pair) or switched (multiple HA pairs) cluster. Up to six HA pairs can be combined into a single SAN cluster or up to 12 HA pairs can be combined into a single NAS cluster.

The ThinkSystem DM7100F controller enclosure provides four QSFP28 ports for 100 GbE NVMe expansion connectivity, and it also has two mezzanine slots (one slot per controller) for mezzanine cards and eight available expansion slots (four slots per controller) for adapter cards.

The ThinkSystem DM7100F controller enclosure also provides eight integrated 12 Gb SAS x4 expansion ports (Mini-SAS HD SFF-8644 connectors) (four ports per controller) for the attachment of the DM240S 2U24 SFF SAS expansion enclosures.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 11 The ThinkSystem DM7100F controller enclosure provides a choice of the following interfaces on the mezzanine cards for base host connectivity (ports per mezzanine card):
4x 25 GbE SFP28 ports for NAS or iSCSI connectivity (require optical transceivers or DAC cables that should be purchased for the mezzanine card). 4x 4/8/16 Gb FC SFP+ ports for FC connectivity (require SFP+ SW optical transceivers that should be purchased for the mezzanine card).

The following interfaces can be added to the ThinkSystem DM7100F controller enclosures with optional adapter cards (ports per adapter card):

Host interfaces
2x 1/10 GbE RJ-45 ports for NAS or iSCSI connectivity (require RJ-45 UTP Category 6 cables that should be purchased for the adapter card).
4x 10 GbE SFP+ ports for NAS or iSCSI connectivity (require DAC cables that should be purchased for the adapter card).
2x 25 GbE SFP28 ports for NAS or iSCSI connectivity (require optical transceivers or DAC cables that should be purchased for the adapter card).
2x 40/100 GbE QSFP28 ports for NAS or iSCSI connectivity (require optical transceivers or DAC cables that should be purchased for the adapter card). 4x 8/16/32 Gb FC SFP+ ports for FC connectivity, or NVMe/FC with 32 Gb ports (SW SFP+ transceivers with LC connectors included).

Expansion interfaces:
2x 100 GbE RoCE QSFP28 ports for NVMe/RoCE expansion connectivity. 4x 12 Gb SAS x4 ports (Mini-SAS HD SFF-8644) for SAS expansion connectivity.

MetroCluster interfaces:
2x 40/100 GbE iWARP QSFP28 ports for MetroCluster IP connectivity (require optical transceivers that should be purchased for the adapter card). 2x 4/8/16 Gb FC SFP+ ports for MetroCluster FC connectivity (require SFP+ SW optical transceivers that should be purchased for the adapter card) (planned for the future).

Configuration notes:

A pair of the mezzanine cards is required for selection.

The optional adapter cards should be installed in pairs: Up to four pairs of the adapter cards are supported per controller enclosure (up to four adapter cards per controller), including a combination of the adapter card pairs.

Both controllers must have matching configurations of the mezzanine ports (type and physical connections) and adapter cards (type, quantity, slot location, and physical connections).

The optional adapter cards should be installed in the controller's expansion slots in the following order: Slot 2, Slot 4, Slot 1, Slot 5.

Note:

In the configurations with two DM240N expansion enclosures, a pair of additional 100 GbE RoCE adapter cards is required for dual HA direct connectivity to the expansion enclosures, and these cards must be installed in the Slot 5 of the DM7100 controllers.

The following table lists the controller for the ThinkSystem DM7100F Unified All Flash Array and supported connectivity options.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 12 Table 3. DM7100F controller and connectivity options Description
Part number
Feature
code
Maximum
quantity per
controller
enclosure
Controllers
Lenovo ThinkSystem DM7100 NVMe Controller
None*
B94T
2 Mezzanine cards: Base host interfaces
Lenovo ThinkSystem DM Series 25Gb 4 Port Ethernet Mezz Card 4XC7A60826
B94J
2 Lenovo ThinkSystem DM Series 16Gb 4 Port Fibre Channel Mezz Card 4XC7A60827
B94K
2 Adapter cards: Additional host interfaces
Lenovo ThinkSystem DM Series 10Gb BaseT 2 port Ethernet Card 4XC7A60794
B94F
8 Lenovo ThinkSystem DM Series 10Gb 4 port Ethernet Card 4XC7A38329
B730
8 Lenovo ThinkSystem DM Series 25Gb 2 port Ethernet Card 4XC7A38328
B72Z
6 Lenovo ThinkSystem DM Series 100Gb 2 port Ethernet Card 4XC7A38327
B72Y
6 Lenovo ThinkSystem DM Series 32Gb 4 port Fibre Channel Card 4XC7A38326
B72X
6 Adapter cards: Additional expansion interfaces
Lenovo ThinkSystem DM Series 100Gb 2 port Ethernet Card 4XC7A38327
B72Y
2 Lenovo ThinkSystem DM Series 12Gb SAS 4 Port Card
4Y37A60797
B94X
6 Adapter cards: MetroCluster interfaces
Lenovo ThinkSystem DM Series 100Gb iWARP 2 Port Ethernet Card (requires ONTAP 9.8 or later)
4XC7A60795
B94G
2 Lenovo ThinkSystem DM Series 16Gb FC-VI 2 Port SFP+ Card 4XC7A60796
B94H
2 SFP+ transceivers for 10Gb 4 port Ethernet Card (4XC7A38329) Intel 10G Ethernet SFP+ SR Optics Module
4TC7A69986
B4SY
32 SFP+ transceivers for 16 Gb FC-VI MetroCluster adapter cards 16Gb Fibre Channel SFP+ Module 1 pack
4TC7A69990
BF5V
12 SFP+ transceivers for 16 Gb FC mezzanine cards
16Gb Fibre Channel SFP+ Module 1 pack
4XF7A14920
B4KA
12 SFP+ and SFP28 transceivers for 25 GbE mezzanine cards and 25 GbE adapter cards 10Gb SW Optical iSCSI SFP+ Module 1 pack
4XF7A14919
B4K9
24 25Gb Ethernet Optical SFP28 Shortwave Module 1 pack
4XF7A39597
B732
24 Lenovo 25GBase-SR SFP28 Transceiver
7G17A03537
AV1B
24 QSFP+/QSFP28 transceivers for 100 GbE adapter cards and SmartIO cards 100Gb Ethernet Optical QSFP28 Shortwave Module 1 Pack
4XF7A39598
B733
20 Lenovo 100Gb SR4 QSFP28 Ethernet Transceiver
4M27A67042
BFH1
20 OM4 cables for 100 GbE QSFP28 transceivers
Lenovo 5m MPO-MPO OM4 MMF Cable
7Z57A03567
AV25
20 Lenovo 7m MPO-MPO OM4 MMF Cable
7Z57A03568
AV26
20 Lenovo 10m MPO-MPO OM4 MMF Cable
7Z57A03569
AV27
20 Lenovo 15m MPO-MPO OM4 MMF Cable
7Z57A03570
AV28
20 Lenovo 20m MPO-MPO OM4 MMF Cable
7Z57A03571
AV29
20 Lenovo 30m MPO-MPO OM4 MMF Cable
7Z57A03572
AV2A
20 Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 13 OM4 cables for 16/32 Gb FC and 25 GbE SFP28 optical transceivers Lenovo 0.5m LC-LC OM4 MMF Cable
4Z57A10845
B2P9
32 Lenovo 1m LC-LC OM4 MMF Cable
4Z57A10846
B2PA
32 Lenovo 3m LC-LC OM4 MMF Cable
4Z57A10847
B2PB
32 Lenovo 5m LC-LC OM4 MMF Cable
4Z57A10848
B2PC
32 Lenovo 10m LC-LC OM4 MMF Cable
4Z57A10849
B2PD
32 Lenovo 15m LC-LC OM4 MMF Cable
4Z57A10850
B2PE
32 Lenovo 25m LC-LC OM4 MMF Cable
4Z57A10851
B2PF
32 Lenovo 30m LC-LC OM4 MMF Cable
4Z57A10852
B2PG
32 OM3 cables for 16/32 Gb FC and 25 GbE SFP28 optical transceivers Lenovo 0.5m LC-LC OM3 MMF Cable
00MN499
ASR5
32 Lenovo 1m LC-LC OM3 MMF Cable
00MN502
ASR6
32 Lenovo 3m LC-LC OM3 MMF Cable
00MN505
ASR7
32 Lenovo 5m LC-LC OM3 MMF Cable
00MN508
ASR8
32 Lenovo 10m LC-LC OM3 MMF Cable
00MN511
ASR9
32 Lenovo 15m LC-LC OM3 MMF Cable
00MN514
ASRA
32 Lenovo 25m LC-LC OM3 MMF Cable
00MN517
ASRB
32 Lenovo 30m LC-LC OM3 MMF Cable
00MN520
ASRC
32 SFP+ DAC cables for 10 GbE SFP+ adapter cards

0.5m Passive DAC SFP+ Cable
00D6288
A3RG
32 1m Passive DAC SFP+ Cable
90Y9427
A1PH
32 1.5m Passive DAC SFP+ Cable
00AY764
A51N
32 2m Passive DAC SFP+ Cable
00AY765
A51P
32 3m Passive DAC SFP+ Cable
90Y9430
A1PJ
32 5m Passive DAC SFP+ Cable
90Y9433
A1PK
32 SFP28 DAC cables for 25 GbE onboard ports, mezzanine cards, and adapter cards Lenovo 1m Passive 25G SFP28 DAC Cable
7Z57A03557
AV1W
26 Lenovo 3m Passive 25G SFP28 DAC Cable
7Z57A03558
AV1X
26 Lenovo 5m Passive 25G SFP28 DAC Cable
7Z57A03559
AV1Y
26 QSFP+ DAC cables for 100 GbE adapter cards and SmartIO cards (operating at 40 Gbps) Lenovo 1m Passive QSFP+ DAC Cable
49Y7890
A1DP
20 Lenovo 3m Passive QSFP+ DAC Cable
49Y7891
A1DQ
20 Lenovo 5m Passive QSFP+ DAC Cable
00D5810
A2X8
20 QSFP28 DAC cables for 100 GbE adapter cards and SmartIO cards (operating at 100 Gbps) Lenovo 1m Passive 100G QSFP28 DAC Cable
7Z57A03561
AV1Z
20 Lenovo 3m Passive 100G QSFP28 DAC Cable
7Z57A03562
AV20
20 Lenovo 5m Passive 100G QSFP28 DAC Cable
7Z57A03563
AV21
20 UTP Category 6 cables for 1/10 GbE RJ-45 adapter cards and 1 GbE RJ-45 management ports

0.75m Green Cat6 Cable
00WE123
AVFW
18 Description
Part number
Feature
code
Maximum
quantity per
controller
enclosure
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 14 1.0m Green Cat6 Cable
00WE127
AVFX
18 1.25m Green Cat6 Cable
00WE131
AVFY
18 1.5m Green Cat6 Cable
00WE135
AVFZ
18 3m Green Cat6 Cable
00WE139
AVG0
18 10m Cat6 Blue Cable
90Y3721
A1MU
18 10m Cat6 Green Cable
90Y3718
A1MT
18 10m Cat6 Yellow Cable
90Y3715
A1MS
18 25m Cat6 Blue Cable
90Y3730
A1MX
18 25m Cat6 Green Cable
90Y3727
A1MW
18 25m Cat6 Yellow Cable
90Y3724
A1MV
18 Description
Part number
Feature
code
Maximum
quantity per
controller
enclosure
* Factory-installed only.

Expansion enclosures
The ThinkSystem DM7100F controller enclosure supports attachment of up to two ThinkSystem DM240N 2U24 SFF NVMe and up to eight DM240S 2U24 SFF SAS expansion enclosures. The expansion enclosures can be added to the system non-disruptively.

Note:

The addition of the second DM240N NVMe expansion enclosure to the storage arrays that were previously configured with one DM240N NVMe expansion enclosure requires planned system downtime.

The following table lists the CTO base models for the expansion enclosures.

Table 4. CTO base models for the ThinkSystem DM Series expansion enclosures Description
Machine
Type/Model
Feature
code
DM240S 2U24 SFF Expansion Enclosure (1-year warranty)
7Y58CTO1WW
BEY7
DM240S 2U24 SFF Expansion Enclosure (3-year warranty)
7D7YCTO1WW
BEY7
DM240N NVMe 2U24 SFF Expansion Enclosure (3-year warranty) 7Y62CTO1WW
B6W6
Configuration notes:

Two NVMe I/O expansion modules (feature code B73A) are pre-selected in the configurator for the DM240N 2U24 SFF expansion enclosures.

Two SAS I/O expansion modules (feature code B39J) are pre-selected in the configurator for the DM240S 2U24 SFF expansion enclosures.

The models of the ThinkSystem DM240N and DM240S 2U24 SFF expansion enclosures ship with the following items:

One chassis with the following components:

Two I/O modules (NVMe or SAS)
Two power supplies
Rack Mount Kit
Electronic Publications Flyer
Two customer-configured power cables
The following expansion connectivity topologies are supported:

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 15 NVMe expansion connectivity
SAS expansion connectivity
NVMe expansion topology
Each ThinkSystem DM240N expansion enclosure ships with two NVMe I/O expansion modules. Each NVMe
I/O expansion module
provides two external 100 GbE QSFP28 ports (labelled Ports A and B) that are used for direct-attach connections to the ThinkSystem DM7100F controller enclosures.

The ThinkSystem DM7100F controller enclosure supports direct attachment of up to two DM240N NVMe expansion enclosures for a total of up to 48 NVMe drives. For one NVMe expansion enclosure, the integrated 100 GbE QSFP28 ports on the DM7100 controller can be used. For two NVMe expansion enclosures, an additional 2-port 100 GbE QSFP28 adapter card is required for the DM7100 controller.

The example expansion connectivity topologies for one and two enclosures with dual-path HA (high availability) are shown in the following figures.

Figure 9. DM7100F NVMe expansion connectivity topology: One enclosure Figure 10. DM7100F NVMe expansion connectivity topology: Two enclosures NVMe expansion cabling rules:

On the Controller A, the integrated 100 GbE Port C is connected to the Port A on the NVMe I/O Module A in the first expansion enclosure, and the integrated 100 GbE Port D is connected to the Port B in the NVMe I/O Module B in the same (in case of only one expansion enclosure) or second expansion enclosure.

On the Controller B, the integrated 100 GbE Port C is connected to the Port A on the NVMe I/O Module B in the first expansion enclosure, and the integrated 100 GbE Port D is connected to the Port B in the NVMe I/O Module A in the same (in case of only one expansion enclosure) or second expansion enclosure.

On the Controller A, the Port 1 on the 100 GbE adapter card is connected to the Port A on the NVMe I/O Module A in the second expansion enclosure, and the Port 2 on the 100 GbE adapter card is

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 16 connected to the Port B in the NVMe I/O Module B in the first expansion enclosure.

On the Controller B, the Port 1 on the 100 GbE adapter card is connected to the Port A on the NVMe I/O Module B in the second expansion enclosure, and the Port 2 on the 100 GbE adapter card is connected to the Port B in the NVMe I/O Module A in the first expansion enclosure.

The following table lists ordering information for the NVMe expansion enclosure connectivity options.

Table 5. NVMe expansion enclosure connectivity options
Description
Part
number
Feature
code
Maximum
quantity per
one expansion
enclosure
Lenovo 1m Passive 100G QSFP28 DAC Cable
7Z57A03561
AV1Z
4 Lenovo 3m Passive 100G QSFP28 DAC Cable
7Z57A03562
AV20
4 Lenovo 5m Passive 100G QSFP28 DAC Cable
7Z57A03563
AV21
4 Configuration note:

Four 100G QSFP28 DAC cables are needed per expansion enclosure for directly connecting the expansion enclosure to the controller enclosure.

SAS expansion topology
Each ThinkSystem DM240S expansion enclosure ships with two SAS I/O expansion modules. Each I/O expansion module
provides four external 12 Gb SAS x4 ports (Mini-SAS HD SFF-8644 connectors labelled Port 1-4) that are used for connections to the ThinkSystem DM7100F controller enclosure and for daisy chaining the expansion enclosures between each other.

The ThinkSystem DM7100F controller enclosure supports up to six SAS expansion enclosure stacks with up to four enclosures in each stack for a total of up to 480 SAS SSDs. For one or two stacks, the integrated SAS expansion ports on the DM7100 controller can be used. For three or four stacks, an additional 4-port SAS adapter card is required for the DM7100 controller. For five or six stacks, two additional 4-port SAS adapter cards are required for the DM7100 controller.

The example expansion connectivity topology for one or two enclosure stacks with dual-path HA (high availability) are shown in the following figures.

Figure 11. DM7100F SAS expansion connectivity topology: One stack

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 17 Figure 12. DM7100F SAS expansion connectivity topology: Two stacks SAS expansion cabling rules:

Ports A and C (integrated and on the SAS adapter cards) on the Controller 1 are primary paths to separate stacks; each port is connected to the Port 1 on the I/O Module A in the first expansion enclosure in the stack.

Ports A and C (integrated and on the SAS adapter cards) on the Controller 2 are primary paths to separate stacks; each port is connected to the Port 1 on the I/O Module B in the first expansion enclosure in the stack.

Ports A at the same location (either integrated or on the SAS adapter cards) on both controllers are connected to the same stack; Ports C at the same location (either integrated or on the SAS adapter cards) on both controllers are connected to the same stack.

Ports B and D (integrated and on the SAS adapter cards) on the Controller 1 are secondary paths to separate stacks; each port is connected to the Port 3 on the I/O Module B in the last expansion enclosure in the stack.

Ports B and D (integrated and on the SAS adapter cards) on the Controller 2 are secondary paths to separate stacks; each port is connected to the Port 3 on the I/O Module A in the last expansion enclosure in the stack.

Ports B at the same location (either integrated or on the SAS adapter cards) on both controllers are connected to the same stack; Ports D at the same location (either integrated or on the SAS adapter cards) on both controllers are connected to the same stack.

Port 3 on the I/O Module A in the first expansion enclosure in a stack is connected to Port 1 on the I/O Module A in the adjacent expansion enclosure in the same stack, and so on (until the last expansion enclosure in the stack is cabled).

Port 3 on the I/O Module B in the first expansion enclosure in a stack is connected to Port 1 on the I/O Module B in the adjacent expansion enclosure in the same stack, and so on (until the last expansion enclosure in the stack is cabled).

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 18 The following table lists ordering information for the SAS expansion enclosure connectivity options.

Table 6. SAS expansion enclosure connectivity options
Description
Part
number
Feature
code
Maximum
quantity per
one expansion
enclosure
External MiniSAS HD 8644/MiniSAS HD 8644 0.5M Cable
00YL847
AU16
4 External MiniSAS HD 8644/MiniSAS HD 8644 1M Cable
00YL848
AU17
4 External MiniSAS HD 8644/MiniSAS HD 8644 2M Cable
00YL849
AU18
4 External MiniSAS HD 8644/MiniSAS HD 8644 3M Cable
00YL850
AU19
4 Configuration notes:

The following quantities of SAS cables are needed per stack of the SAS expansion enclosures:

Two SAS cables per expansion enclosure in the stack for connecting the first expansion enclosure in the stack to the controller enclosure and for connections to the adjacent expansion enclosures.

Two additional SAS cables for connecting the last expansion enclosure in the stack to the controller enclosure.

The length of the SAS cables that connect a 2U24 SAS enclosure to an adjacent 4U controller enclosure should be at least 1 meter.

Drives
With the DM7100F, the drives are installed in the expansion enclosures. The ThinkSystem DM240N 2U24 SFF expansion enclosures support up to 24 SFF NVMe hot-swap SSDs, and the DM240S 2U24 SFF expansion enclosures support up to 24 SFF SAS/SATA hot-swap SSDs.

The following table lists supported drive packs for the controller and expansion enclosures.

Configuration notes:

When ordering the systems, select the drives that match the ONTAP offering and bundle you are installing on the DM controller. Drive feature codes are specific to Unified or SAN Only offerings, and to Base, Fundamentals and Premium bundles. See the
Software
section for details.

Drives are sold in packs. Supported quantities are as follows:

The DM240N 2U24 SFF expansion enclosure supports 12, 18 or 24 NVMe drives (4 packs of 6 drives)
The DM240S 2U24 SFF expansion enclosure supports 12, 18 or 24 SAS/SATA drives (4 packs of 6 drives)
A minimum of 2 drive packs is required.

For factory-installed drive packs, all drives in the enclosure must be of the same type and capacity.

Field upgrades
: Drive packs for field upgrades can be ordered via the CTO base 7D4FCTO1WW, ThinkSystem DM Drive Pack Upgrades for DM7100. These are for use in existing expansion enclosures that have not been fully populated with the factory-installed drive packs Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 19 Table 7. DM240N 2U24 SFF drive options
Description
Part
number
Feature
code
Maximum
quantity
per 2U24
enclosure

2.5-inch NVMe hot-swap SSDs (non-SED)
Lenovo ThinkSystem 11.5TB (6x 1.92TB NVMe Non-SED) Drive Pack None*
BC81
4 Lenovo ThinkSystem 23TB (6x 3.84TB NVMe Non-SED) Drive Pack None*
BC7W
4 2.5-inch NVMe hot-swap SSD SEDs**
Lenovo ThinkSystem 11.5TB (6x 1.92TB NVMe SED) Drive Pack None*
BC7Z
4 Lenovo ThinkSystem 23TB (6x 3.84TB NVMe SED) Drive Pack None*
BC7U
4 Lenovo ThinkSystem 23TB (6x 3.84TB NVMe SED FIPS) Drive Pack None*
BC7V
4 Lenovo ThinkSystem 46TB (6x 7.68TB NVMe SED) Drive Pack None*
BC7Y
4 Lenovo ThinkSystem 92TB (6x 15.36TB NVMe SED) Drive Pack None*
BC80
4 * Drive packs for field upgrades can be ordered via the CTO base 7D4FCTO1WW (refer to the configuration
note
).
** Available worldwide except PRC and RUCIS markets
The following table lists supported drive options for the DM240S 2U24 SFF expansion enclosures.

Table 8. DM240S 2U24 SFF drive options: 2.5-inch SAS hot-swap SSDs Description
Part
number
Feature
code
Maximum
quantity
per 2U24
enclosure
ThinkSystem 5.76TB (6x 960GB, 2.5", SSD) Drive Pack for DM7100F None*
BC7L
4 ThinkSystem 23TB (6x 3.84TB, 2.5", SSD) Drive Pack for DM7100F None*
BC7M
4 ThinkSystem 46TB (6x 7.68TB, 2.5", SSD) Drive Pack for DM7100F None*
BC7Q
4 ThinkSystem 92TB (6x 15.36TB, 2.5", SSD) Drive Pack for DM7100F None*
BC7S
4 * Drive packs for field upgrades can be ordered via the CTO base 7D4FCTO1WW (refer to the configuration
note
).

Software
In this section:

Feature bundles
ONTAP software versions
Extended ONTAP features
Upgrading to Unified Premium ONTAP
Ansible playbooks for DM Series
ONTAP software unifies data management across flash, disk, and cloud to simplify the Lenovo DM storage environment. It builds the foundation for a Data Fabric, making it easy to move the data where it is needed across flash, disk, and cloud resources.

Feature bundles
Controller software for the DM7100F is available in the following bundles of features:

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 20 Unified Base (China only) (Feature B5RH)
Unified Premium (Feature B5RJ)
The following table summarizes the features in each bundle for the DM7100F.

Table 9. Comparison of software features for the DM7100F Feature
Unified
Base
(PRC only)
Unified
Premium
Controller software feature code
B5RH
B5RJ
RAID-4, RAID-DP, and RAID-TEC data protection
Included
Included
All Flash Array (AFA) capability
Included
Included
Thin provisioning
Included
Included
Compression
Included
Included
Compaction
Included
Included
Deduplication
Included
Included
Snapshots
Included
Included
Encryption*
No
Included*
Balanced placement
Included
Included
Dynamic capacity expansion
Included
Included
Adaptive Quality of Service
Included
Included
SnapRestore
Included
Included
FlexClone
Included
Included
FlexVol
Included
Included
FlexCache
Included
Included
SnapMirror asynchronous replication
No
Included
SyncMirror data protection
Included
Included
Trusted Platform Module (TPM) support
No
Included
MetroCluster IP
Included
Included
NVMe over FC Protocol
Included
Included
NVMe over TCP Protocol
Included
Included
SnapMirror Business Continuity (SMBC)
No
Included
SnapMirror synchronous replication
No
Included
FlexGroup
Included
Included
SnapVault disk-based storage backup
No
Included
SnapCenter
No
Included
ONTAP S3
Included
Included
ONTAP S3 SnapMirror
No
Optional
FabricPool object storage tiering
Optional
Optional
SnapLock data protection
No
Optional
Security and Compliance Bundle (Anti-ransomware, MTKM, SnapLock) No
Optional
Hybrid Cloud Bundle (FabricPool, SnapMirror Cloud)
Optional**
Optional
* Requires the encryption version of ONTAP. See the
ONTAP software
section.
** When used with bundles other than Unified Premium, Hybrid Cloud Bundle only adds FabricPool. The use of SnapMirror Cloud requires Unified Premium.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 21 The features are summarized as follows:

RAID-4, RAID-DP, and RAID-TEC data protection
: Provides the flexibility to choose the level of
data protection required and helps improve performance and availability with built-in spare capacity and by distributing data across all physical drives in the aggregate, sustaining to up to one (RAID-4), two (RAID-DP), or three (RAID-TEC) concurrent drive failures.

All Flash Array (AFA) capability
: Meets the demand for higher speed, lower latency storage and provides higher IOPS and bandwidth with lower power usage and total cost of ownership than hybrid or HDD-based solutions.

Thin provisioning
: Optimizes efficiency by allocating storage space based on the minimum space required by each application at any given time, so that applications consume only the space they are actually using, not the total space that has been allocated to them, which allows customers to purchase storage they need today and add more as application requirements grow.

Compression:

Provides transparent inline and post-process data compression to reduce the amount of storage that customers need to purchase and manage.

Compaction:
enhances compression to further reduce the amount of storage that customers need to purchase and manage.

Deduplication:

Performs general-purpose deduplication for removal of redundant data to reduce the amount of storage that customers need to purchase and manage.

Snapshots
: Enables creation of read-only copies of data for backup, parallel processing, testing, and development, and have the copies available almost immediately.

Encryption:

Provides software-based encryption for data at rest for enhanced data security with the traditional drives and embedded key management (requires the encryption-capable version of the ONTAP software).

Balanced placement:

Provides automated workload distribution across the cluster to help increase utilization and performance.

Dynamic capacity expansion:

Allows the capacity of a volume or aggregate to be expanded by adding new physical drives.

Adaptive Quality of Service:

Simplifies operations and maintains consistent workload performance by defining QoS policies and automatically adjusting storage resources to respond to workload changes.

SnapRestore:

Enables quick recovery of data by reverting a local volume or file to its previous state from a particular snapshot copy stored on the file system.

FlexClone:

References snapshot metadata to create writable point-in-time copies of a volume.

FlexVol:

Provides abstraction layer between the logical volume and its physical location in the storage array.

FlexCache:

Speeds up access to data and offloads traffic from heavily accessed volumes for read- intensive workloads by placing frequently used data in cache locally or remotely (closer to the point of client access) and serving the data to the clients directly from cache without accessing the data source.

SnapMirror asynchronous replication:

Provides storage system-based data replication between
the storage systems containing source (local) and destination (remote) volumes by using asynchronous (at specified regular intervals) data transfers over IP communication links.

SyncMirror data protection:

Adds extra level of data protection and availability by mirroring a pair of RAID aggregates.

Trusted Platform Module (TPM)
: For encryption enabled systems. The encryption keys for the onboard key manager (OKM) are no longer stored in the boot device, but instead are stored in the physical TPM for systems so equipped, offering greater security and protection. Moving to the TPM is a nondisruptive process.

MetroCluster IP:

Provides storage system-based clustering with online, real-time data mirroring Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 22 between the local and remote sites by using synchronous data transfers over IP communication links to deliver continuous availability with zero RPO and near-zero RTO. All storage systems in a MetroCluster IP configuration must be of the same model. New to ONTAP 9.11: MetroCluster with Storage Virtual Machine Disaster Recovery (SVM-DR) can now use a third site for the SVM-DR NVMe over FC Protocol
: Enables NVMe over FC
NVMe over TCP Protocol
: Enables NVMe over TCP
Data Protection Optimized (DPO)
: Increases the amount of concurrent SnapMirror sessions per node, as well as improving SnapMirror performance to the cluster.

SnapMirror Business Continuity (SMBC):

Non-disruptive failover active-active cross site clusters.

Based on existing SnapMirror Synchronous Replication. Offers Zero data loss, zero downtime. You do not have to failover the application. If there is a failure the application will continue to run and there will be no need to restart.

SnapMirror synchronous replication:

Provides storage system-based data replication between the storage systems containing source (local) and destination (remote) volumes by using synchronous (as soon as the data is written to the source volume)
FlexGroup:

Enables a single volume to span across multiple clustered storage arrays to maximize storage capacity and automate load distribution. New to ONTAP 9.11: FlexGroups can now be created as SnapLock volumes.

SnapVault disk-based storage backup:

Enables data stored on multiple systems to be backed up to a central, secondary system quickly and efficiently as read-only snapshot copies.

SnapCenter:

Provides application- and virtual machine-aware backup and restoration of data by using the Snapshots technology and leverages the SnapMirror capabilities of storage systems to provide onsite or offsite backup set mirroring for disaster recovery.

ONTAP S3
: Expands the DM Series unified story and allows customers to manage, block, file, and object data from one interface. Customers can now natively store data in S3 buckets onboard the DM Series.

ONTAP S3 SnapMirror
: Enables you to protect buckets in ONTAP S3 object stores using familiar SnapMirror mirroring and backup functionality. Requires ONTAP 9.10.1 or later on both source and destination clusters. Requires the Unified Premium Bundle.

SnapMirror Cloud
: A backup and recovery technology designed for ONTAP users who want to transition their data protection workflows to the cloud. SnapMirror Cloud is an extension to the family of SnapMirror replication technologies. While SnapMirror is frequently used for ONTAP-to-ONTAP backups, SnapMirror Cloud uses the same replication engine to transfer Snapshot copies for ONTAP to S3-compliant object storage backups.

Multitenant Key Management (MTKM)
: Provides the ability for individual tenants or storage virtual machines (SVMs) to maintain their own keys through KMIP for NVE. With multitenant external key management, you can centralize your organization’s key management functions by department or tenant while inherently confirming that keys are not stored near the assets. This approach decreases the possibility of compromise.

Anti-ransomware
: Uses workload analysis in NAS (NFS and SMB) environments to proactively detect and warn about abnormal activity that might indicate a ransomware attack. When an attack is suspected, anti-ransomware also creates new Snapshot backups, in addition to existing protection from scheduled Snapshot copies. New to ONTAP 9.11: Optional multi-admin verification to approve administration functions that could result in data loss.

Add-on feature bundles:

Security and Compliance Bundle
: Licensed per 2-node HA Pair, the Security and Compliance Bundle provides built-in protection from ransomware and while also providing the ability to meet regulatory compliance and organizational data retention requirements.

Includes: Anti-ransomware feature with Multitenant Key Management (MTKM) and SnapLock Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 23 Hybrid Cloud Bundle
: Licensed per TB (3 Year & 5 Year Offerings) the Hybrid Cloud Bundle provides the ability to use S3 SnapMirror from ONTAP to the Public Cloud (AWS S3) and/or SnapMirror Cloud with participating ISV Backup providers.

Includes SnapMirror Cloud and FabricPool
Optional Extended features also available via Feature on Demand (FoD) (see the Extended ONTAP
features
section)
FabricPool
: FabricPool is a hybrid storage solution that uses an all flash (all SSD) aggregate as the performance tier and an object store as the external capacity tier. Data in a FabricPool is stored in a tier based on whether it is frequently accessed or not. Using a FabricPool helps you reduce storage cost without compromising performance, efficiency, or protection.

SnapLock data protection:

Creates Write-Once-Read-Many (WORM) non-rewritable, non-erasable data on hard disk drives to prevent files from being altered or deleted until a predetermined or default retention date.

ONTAP software versions
The following table lists the software selection options for the DM7100F. The table also indicates which markets each version is available in.

Table 10. Software selection
Feature
code
Description
Availability
ONTAP 9.10

BNLY
Lenovo ThinkSystem DM Series ONTAP 9.10 Software Base NonEncryption China only
BNM2
Lenovo ThinkSystem DM Series ONTAP 9.10 Software Encryption All markets except China
BNM1
Lenovo ThinkSystem DM Series ONTAP 9.10 Software NonEncryption All markets
ONTAP 9.11

BRK0
Lenovo ThinkSystem DM Series ONTAP 9.11 Software Base NonEncryption China only
BRJW
Lenovo ThinkSystem DM Series ONTAP 9.11 Software Encryption All markets except China
BRJX
Lenovo ThinkSystem DM Series ONTAP 9.11 Software NonEncryption All markets
Software maintenance is included in the DM7100F warranty and support (see Warranty and support
for
details).

Extended ONTAP features
FabricPool and SnapLock WORM data protection are optional extended features. To obtain these feature licenses, order the part numbers as listed in the following table. Upgrades are supported in specific bundles as listed in the
Comparison of software features table
.

Note
: Extended features are only available as field upgrades and are not orderable as part of a CTO configuration.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 24 Table 11. Optional software features
Part
number
Feature
code
Description
Quantity
4P47A16547
None*
DM Series SnapLock License
1 per system (contains two
licenses)
4P47A37057
None*
DM Series FabricPool – 1TB Increment – 3
years
1 per TB of storage capacity
4P47A37288
None*
DM Series FabricPool – 1TB Increment – 5
years
1 per TB of storage capacity
4P47A82668
BPQ6
Security and Compliance Bundle
1 per system (contains two
licenses)
4P47A83121
BQ8X
Hybrid Cloud Bundle 3 year per TB License
1 per TB of storage capacity
4P47A83123
BQ8W
Hybrid Cloud Bundle 5 year per TB License
1 per TB of storage capacity
* Field upgrade only; no factory installation.

Configuration notes:

The SnapLock feature is licensed on a per-controller basis; that is, two licenses are needed per system, and these two licenses are contained in a single orderable part number. These licenses also include 5-year software support entitlement.

The FabricPool feature is a cluster-wide, capacity-based license that is available for 3-year or 5-year subscription terms.

Upgrading to Unified Premium ONTAP
PRC only
: This section only applies to customers in China who are using the Unified Base offering.

To upgrade your existing ONTAP installation to Unified Premium ONTAP, use DCSC to specify the storage you already have installed, since the upgrade license is based on your existing configuration. https://dcsc.lenovo.com/#/configuration/cto/7D4FCTO2WW?hardwareType=storage The software license for field upgrades is ordered via the CTO base 7D4FCTO2WW, as listed in the following table.

Table 12. Feature codes for ONTAP upgrades (MTM 7D4FCTO2WW) Feature code
Description
BNKN
Unified Base to Unified Premium CFC Selection (PRC only) Ansible playbooks for DM Series
Ansible Playbooks give customers the ability to quickly deploy and use DM Series storage systems using a standard open source deployment tool. Each playbook executes a set of tasks to achieve a configuration/provisioning goal.

Lenovo has created playbooks that can be used with DM Series storage systems to help with:

Provisioning
Configuring
To access the Ansible Playbooks for Lenovo ThinkSystem DM Series storage systems, go to the following page:
https://github.com/lenovo/ansible-dm-series-ontap

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 25 Management
The ThinkSystem DM7100F Unified All Flash Array supports the following management interfaces:

Lenovo ThinkSystem Storage Manager, a web-based interface via HTTPS for single-system management or centralized management of the cluster of systems, that runs on the storage system itself and requires only a supported browser (Microsoft Internet Explorer, Google Chrome, or Mozilla Firefox), so there is no need for a separate console or plug-in.

Command line interface (CLI) via SSH or through serial console.

Syslog, SNMP, and e-mail notifications.

Optional Lenovo XClarity for discovery, inventory, monitoring, and alerts.

Power supplies and cables
The ThinkSystem DM7100F 4U controller enclosure ships with four redundant hot-swap 1600 W (100 - 240 V)
Platinum AC power supplies, each with an IEC 320-C14 connector.

The ThinkSystem DM240N 2U24 SFF expansion enclosures ship with two redundant hot-swap 1600 W (100 - 240 V)
Platinum AC power supplies, each with an IEC 320-C14 connector.

The ThinkSystem DM240S 2U24 SFF expansion enclosures ship with two redundant hot-swap 913 W (100 - 240 V)
Platinum AC power supplies, each with an IEC 320-C14 connector.

Each ThinkSystem DM Series enclosure requires the selection of two or four power cables, depending on the quantity of the power supplies in the enclosure.

The following table lists the rack power cable and line cord options that can be ordered for the DM7100F 4U, DM240N 2U24 SFF, and DM240S 2U24 SFF enclosures (two or four power cords per enclosure).

Table 13. Power cables for DM7100F 4U, DM240N 2U24 SFF, and DM240S 2U24 SFF enclosures Description
Part
number
Feature
code
Rack power cables

1.0m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable 4L67A08367
B0N5

1.2m, 16A/100-250V, 2 Short C13s to Short C20 Rack Power Cable 47C2491
A3SW

1.5m, 13A/100-250V, C13 to IEC 320-C14 Rack Power Cable 4L67A08368
B0N6

2.0m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable 4L67A08369
6570

2.5m, 16A/100-250V, 2 Long C13s to Short C20 Rack Power Cable 47C2492
A3SX

2.8m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable 4L67A08370
6400

2.8m, 16A/100-250V, 2 Short C13s to Long C20 Rack Power Cable 47C2493
A3SY

4.1m, 16A/100-250V, 2 Long C13s to Long C20 Rack Power Cable 47C2494
A3SZ

4.3m, 13A/125V-10A/250V, C13 to IEC 320-C14 Rack Power Cable 4L67A08371
6583
Line cords

2.8m, 10A/250V, C13 to AS/NZS 3112 Line Cord
39Y7924
6211

2.8m, 10A/250V, C13 to BS 1363/A Line Cord
39Y7923
6215

2.8m, 10A/250V, C13 to CEE7-VII Line Cord
39Y7917
6212

2.8m, 10A/250V, C13 to CEI 23-16 Line Cord
39Y7921
6217

2.8m, 10A/250V, C13 to CNS 10917-3 Line Cord
81Y2375
6317

2.8m, 10A/250V, C13 to DK2-5a Line Cord
39Y7918
6213

2.8m, 10A/250V, C13 to GB 2099.1 Line Cord
39Y7928
6210
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 26 2.8m, 10A/250V, C13 to IRAM 2073 Line Cord
39Y7930
6222

2.8m, 10A/250V, C13 to IS 6538 Line Cord
39Y7927
6269

2.8m, 10A/250V, C13 to NBR 14136 Line Cord
69Y1988
6532

2.8m, 10A/250V, C13 to NEMA 6-15P Line Cord
46M2592
A1RF

2.8m, 10A/250V, C13 to SABS 164 Line Cord
39Y7922
6214

2.8m, 10A/250V, C13 to SEV 1011-S24507 Line Cord
39Y7919
6216

2.8m, 10A/250V, C13 to SI 32 Line Cord
39Y7920
6218

2.8m, 12A/125V, C13 to JIS C-8303 Line cord
46M2593
A1RE

2.8m, 12A/250V, C13 to JIS C-8303 Line Cord
4L67A08357
6533

2.8m, 12A/250V, C13 to KS C8305 Line Cord
39Y7925
6219

2.8m, 13A/125V, C13 to NEMA 5-15P Line Cord
00WH545
6401

2.8m, 15A/125V, C13 to CNS 10917-3 Line Cord
81Y2374
6402

4.3m, 10A/250V, C13 to AS/NZS 3112 Line Cord
81Y2383
6574

4.3m, 10A/250V, C13 to BS 1363/A Line Cord
81Y2377
6577

4.3m, 10A/250V, C13 to CEE7-VII Line Cord
81Y2376
6572

4.3m, 10A/250V, C13 to CEI 23-16 Line Cord
81Y2380
6493

4.3m, 10A/250V, C13 to CNS 10917-3 Line Cord
81Y2389
6531

4.3m, 10A/250V, C13 to DK2-5a Line Cord
81Y2382
6575

4.3m, 10A/250V, C13 to GB 2099.1 Line Cord
81Y2378
6580

4.3m, 10A/250V, C13 to IRAM 2073 Line Cord
81Y2384
6492

4.3m, 10A/250V, C13 to IS 6538 Line Cord
81Y2386
6567

4.3m, 10A/250V, C13 to NBR 14136 Line Cord
81Y2387
6404

4.3m, 10A/250V, C13 to NEMA 6-15P Line Cord
4L67A08361
6373

4.3m, 10A/250V, C13 to SABS 164 Line Cord
81Y2379
6576

4.3m, 10A/250V, C13 to SEV 1011-S24507 Line Cord
81Y2390
6578

4.3m, 10A/250V, C13 to SI 32 Line Cord
81Y2381
6579

4.3m, 12A/125V, C13 to JIS C-8303 Line Cord
39Y7926
6335

4.3m, 12A/250V, C13 to JIS C-8303 Line Cord
4L67A08362
6495

4.3m, 12A/250V, C13 to KS C8305 Line Cord
81Y2385
6494

4.3m, 13A/125V, C13 to NEMA 5-15P Line Cord
4L67A08360
AX8A

4.3m, 15A/125V, C13 to CNS 10917-3 Line Cord
81Y2388
6530
Description
Part
number
Feature
code
Rack installation
The individually shipped ThinkSystem DM Series enclosures come with the following rail kits:

DM7100F: ThinkSystem Storage Rail Kit 4U60
DM240N 2U24 SFF: ThinkSystem NVMe Rail Kit 4 post
DM240S 2U24 SFF: ThinkSystem Storage Rack Mount Kit 2U24/4U60 The rack mount kits are listed in the following table.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 27 Table 14. 4-post rack mount kit
Description
Feature
code
Quantity
Lenovo ThinkSystem Storage Rail Kit 4U60
BE28
1 Lenovo ThinkSystem NVMe Rail Kit 4 post
B6Y6
1 Lenovo ThinkSystem Storage Rack Mount Kit 2U24/4U60
B38Y
1 When the ThinkSystem DM Series enclosures are factory-integrated and shipped installed in a rack cabinet, the rack mount kits that support Ship-in-Rack (SIR) capabilities are derived by the configurator.

The SIR-capable rack mount kits are listed in the following table.

Table 15. 4-post SIR rack mount kits
Description
Feature
code
Quantity
Lenovo ThinkSystem Storage Rail Kit 4U60
BE28
1 Lenovo ThinkSystem NVMe Adjustable Rail Kit (SIR)
B6Y7
1 Lenovo ThinkSystem Storage SIR Rack Mount Kit (for 2U24 SAS enclosures) B6TH
1 The following table summarizes the rack mount kit features and specifications.

Table 16. Rack mount kit features and specifications summary Attribute
Screw-in fixed rail with adjustable depth
2U24 NVMe
2U24 SAS
2U24 NVMe SIR
2U24 SAS SIR
4U60
Feature code
B6Y6
B38Y
B6Y7
B6TH
BE28
Enclosure support
DM240N
DM240S
DM240N
DM240S
DM7100F
Rail type
Fixed (static) with
adjustable depth
Fixed (static) with
adjustable depth
Fixed (static) with
adjustable depth
Fixed (static) with
adjustable depth
Fixed (static) with
adjustable depth
Tool-less
installation
No
No
No
No
No
In-rack
maintenance
Yes*
Yes*
Yes*
Yes*
Yes*
Ship-in-rack (SIR)
No
No
Yes
Yes
Yes
1U PDU support
Yes
Yes
Yes
Yes
Yes
0U PDU support
Limited**
Limited**
Limited**
Limited**
Limited**
Rack type
IBM or Lenovo 4-post, IEC standard-compliant
Mounting holes
Square or round
Square or round
Square or round
Square or round
Square or round
Mounting flange
thickness
2 mm (0.08 in.) –

3.3 mm (0.13 in.)
2 mm (0.08 in.) –

3.3 mm (0.13 in.)
2 mm (0.08 in.) –

3.3 mm (0.13 in.)
2 mm (0.08 in.) –

3.3 mm (0.13 in.)
2 mm (0.08 in.) –

3.3 mm (0.13 in.)
Distance between
front and r
ear
mounting flanges^
605 mm (23.8 in.) –
812.8 mm (32 in.)
605 mm (23.8 in.) –
812.8 mm (32 in.)
605 mm (23.8 in.) –
812.8 mm (32 in.)
605 mm (23.8 in.) –
812.8 mm (32 in.)
605 mm (23.8 in.) –
812.8 mm (32 in.)
* The majority of the enclosure components can be serviced from the front or rear of the enclosure, which does not require the removal of the enclosure from the rack cabinet.
** If a 0U PDU is used, the rack cabinet must be at least 1000 mm (39.37 in.) deep for 2U24 enclosures, or at least 1200 mm (47.24 in.) deep for 4U enclosures.
^ Measured when mounted on the rack, from the front surface of the front mounting flange to the rear most point of the rail.

Physical specifications
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 28 The ThinkSystem DM7100F controller enclosure has the following dimensions and weight (approximate):

Height: 175 mm (6.9 in.)
Width: 447 mm (17.6 in.)
Depth: 828 mm (32.6 in.)
Weight (fully configured): 49.2 kg (108.5 lb)
The ThinkSystem DM240N 2U24 SFF enclosures have the following dimensions and weight (approximate):

Height: 87 mm (3.4 in.)
Width: 447 mm (17.6 in.)
Depth: 543 mm (21.4 in.)
Weight (fully configured): 30.2 kg (66.7 lb)
The ThinkSystem DM240S 2U24 SFF enclosures have the following dimensions and weight (approximate):

Height: 85 mm (3.4 in.)
Width: 449 mm (17.7 in.)
Depth: 484 mm (19.1 in.)
Weight (fully configured): 24.4 kg (53.8 lb)
Operating environment
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 29 Operating environment
The ThinkSystem DM7100F, DM240N 2U24 SFF, and DM240S 2U24 SFF enclosures are supported in the following environment:

Air temperature:

Operating:

DM7100F: 10 °C - 35 °C (50 °F - 95 °F)
DM240N 2U24 SFF: 5 °C - 45 °C (41 °F - 113 °F)
DM240S 2U24 SFF: 10 °C - 40 °C (50 °F - 104 °F)
Non-operating: -40 °C - +70 °C (-40 °F - 158 °F)
Maximum altitude: 3050 m (10,000 ft)
Relative humidity (non-condensing):

Operating:

DM7100F: 8% - 80%
DM240N 2U24 SFF: 8% - 90%
DM240S 2U24 SFF: 20% - 80%
Non-operating: 10% - 95%
Electrical power:

DM7100F
100 to 127 (nominal) V AC; 50 Hz or 60 Hz; 16.12 A
200 to 240 (nominal) V AC; 50 Hz or 60 Hz; 8.06 A
Maximum system power load: 1579 W
DM240N 2U24 SFF
100 to 127 (nominal) V AC; 50 Hz or 60 Hz; 8.66 A
200 to 240 (nominal) V AC; 50 Hz or 60 Hz; 4.33 A
Maximum system power load: 848 W
DM240S 2U24 SFF
100 to 127 (nominal) V AC; 50 Hz or 60 Hz; 4.11 A
200 to 240 (nominal) V AC; 50 Hz or 60 Hz; 2.05 A
Maximum system power load: 390 W
Heat dissipation:

DM7100F: 5388 BTU/hour
DM240N 2U24 SFF: 2894 BTU/hour
DM240S 2U24 SFF: 1331 BTU/hour
Acoustical noise emission:

DM7100F: 8.5 bels
DM240N 2U24 SFF: 6.4 bels
DM240S 2U24 SFF: 6.9 bels
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 30 Warranty and support
The DM7100F and DM240N enclosure have a 3-year warranty and the DM240S enclosure has a 1-year or 3-year warranty based on the machine type of the system, as listed in the following table.

Table 17. Duration of standard warranty
System
Machine type
1 year warranty
Machine type
3 year warranty
DM7100F Controller Enclosure
-
7D25
DM240N 2U24 SFF Expansion Enclosure
-
7Y62
DM240S 2U24 SFF Expansion Enclosure
7Y58
7D7Y
The standard warranty terms are customer-replaceable unit (CRU) and onsite (for field-replaceable units FRUs only) with standard call center support during normal business hours and 9x5 Next Business Day Parts Delivered.

Lenovo’s additional support services provide a sophisticated, unified support structure for your data center, with an experience consistently ranked number one in customer satisfaction worldwide. Available offerings include:

Premier Support
Premier Support provides a Lenovo-owned customer experience and delivers direct access to technicians skilled in hardware, software, and advanced troubleshooting, in addition to the following:

Direct technician-to-technician access through a dedicated phone line 24x7x365 remote support
Single point of contact service
End to end case management
Third-party collaborative software support
Online case tools and live chat support
On-demand remote system analysis
Warranty Upgrade (Preconfigured Support)
Services are available to meet the on-site response time targets that match the criticality of your systems.
3, 4, or 5 years of service coverage
1-year or 2-year post-warranty extensions
Foundation Service
: 9x5 service coverage with next business day onsite response.

YourDrive YourData is an optional extra (see below).

Essential Service:
24x7 service coverage with 4-hour onsite response or 24-hour committed repair (available only in select markets). Bundled with YourDrive YourData.

Advanced Service:
24x7 service coverage with 2-hour onsite response or 6-hour committed repair (available only in select markets). Bundled with YourDrive YourData.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 31 Managed Services
Lenovo Managed Services provides continuous 24x7 remote monitoring (plus 24x7 call center availability) and proactive management of your data center using state-of-the-art tools, systems, and practices by a team of highly skilled and experienced Lenovo services professionals.

Quarterly reviews check error logs, verify firmware & OS device driver levels, and software as needed. We’ll also maintain records of latest patches, critical updates, and firmware levels, to ensure you systems are providing business value through optimized performance.

Technical Account Management (TAM)
A Lenovo Technical Account Manager helps you optimize the operation of your data center based on a deep understanding of your business. You gain direct access to your Lenovo TAM, who serves as your single point of contact to expedite service requests, provide status updates, and furnish reports to track incidents over time. In addition, your TAM will help proactively make service recommendations and manage your service relationship with Lenovo to make certain your needs are met.

Enterprise Server Software Support
Enterprise Software Support is an additional support service providing customers with software support on Microsoft, Red Hat, SUSE, and VMware applications and systems. Around the clock availability for critical problems plus unlimited calls and incidents helps customers address challenges fast, without incremental costs. Support staff can answer troubleshooting and diagnostic questions, address product comparability and interoperability issues, isolate causes of problems, report defects to software vendors, and more.

YourDrive YourData
Lenovo’s YourDrive YourData is a multi-drive retention offering that ensures your data is always under your control, regardless of the number of drives that are installed in your Lenovo server. In the unlikely event of a drive failure, you retain possession of your drive while Lenovo replaces the failed drive part. Your data stays safely on your premises, in your hands. The YourDrive YourData service can be purchased in convenient bundles and is optional with Foundation Service. It is bundled with Essential Service and Advanced Service.

Health Check
Having a trusted partner who can perform regular and detailed health checks is central to maintaining efficiency and ensuring that your systems and business are always running at their best. Health Check supports Lenovo-branded server, storage, and networking devices, as well as select Lenovo- supported products from other vendors that are sold by Lenovo or a Lenovo-Authorized Reseller.

Examples of region-specific warranty terms are second or longer business day parts delivery or parts-only base warranty.

If warranty terms and conditions include onsite labor for repair or replacement of parts, Lenovo will dispatch a service technician to the customer site to perform the replacement. Onsite labor under base warranty is limited to labor for replacement of parts that have been determined to be field-replaceable units (FRUs).

Parts that are determined to be customer-replaceable units (CRUs) do not include onsite labor under base warranty.

If warranty terms include parts-only base warranty, Lenovo is responsible for delivering only replacement parts that are under base warranty (including FRUs) that will be sent to a requested location for self-service.

Parts-only service does not include a service technician being dispatched onsite. Parts must be changed at customer’s own cost and labor and defective parts must be returned following the instructions supplied with the spare parts.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 32 Lenovo Service offerings are region-specific. Not all preconfigured support and upgrade options are available in every region. For information about Lenovo service upgrade offerings that are available in your region, refer to the following resources:

Service part numbers in Lenovo Data Center Solution Configurator (DCSC):
http://dcsc.lenovo.com/#/services
Lenovo Services Availability Locator
http://lenovolocator.com/
For service definitions, region-specific details, and service limitations, please refer to the following documents:

Lenovo Statement of Limited Warranty for Infrastructure Solutions Group (ISG) Servers and System Storage
http://pcsupport.lenovo.com/us/en/solutions/ht503310
Lenovo Data Center Services Agreement
http://support.lenovo.com/us/en/solutions/ht116628
Services
Lenovo Services is a dedicated partner to your success. Our goal is to reduce your capital outlays, mitigate your IT risks, and accelerate your time to productivity.

Note
: Some service options may not be available in all markets or regions. For more information, go to https://www.lenovo.com/services
. For information about Lenovo service upgrade offerings that are available in your region, contact your local Lenovo sales representative or business partner.

Here’s a more in-depth look at what we can do for you:

Asset Recovery Services
Asset Recovery Services (ARS) helps customers recover the maximum value from their end-of-life equipment in a cost-effective and secure way. On top of simplifying the transition from old to new equipment, ARS mitigates environmental and data security risks associated with data center equipment disposal. Lenovo ARS is a cash-back solution for equipment based on its remaining market value, yielding maximum value from aging assets and lowering total cost of ownership for your customers. For more information, see the ARS page, https://lenovopress.com/lp1266-reduce-e-
waste-and-grow-your-bottom-line-with-lenovo-ars
.

Assessment Services
An Assessment helps solve your IT challenges through an onsite, multi-day session with a Lenovo technology expert. We perform a tools-based assessment which provides a comprehensive and thorough review of a company's environment and technology systems. In addition to the technology based functional requirements, the consultant also discusses and records the non-functional business requirements, challenges, and constraints. Assessments help organizations like yours, no matter how large or small, get a better return on your IT investment and overcome challenges in the ever-changing technology landscape.

Design Services
Professional Services consultants perform infrastructure design and implementation planning to support your strategy. The high-level architectures provided by the assessment service are turned into low level designs and wiring diagrams, which are reviewed and approved prior to implementation. The implementation plan will demonstrate an outcome-based proposal to provide business capabilities through infrastructure with a risk-mitigated project plan.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 33 Basic Hardware Installation
Lenovo experts can seamlessly manage the physical installation of your server, storage, or networking hardware. Working at a time convenient for you (business hours or off shift), the technician will unpack and inspect the systems on your site, install options, mount in a rack cabinet, connect to power and network, check and update firmware to the latest levels, verify operation, and dispose of the packaging, allowing your team to focus on other priorities.

Deployment Services
When investing in new IT infrastructures, you need to ensure your business will see quick time to value with little to no disruption. Lenovo deployments are designed by development and engineering teams who know our Products & Solutions better than anyone else, and our technicians own the process from delivery to completion. Lenovo will conduct remote preparation and planning, configure & integrate systems, validate systems, verify and update appliance firmware, train on administrative tasks, and provide post-deployment documentation. Customer’s IT teams leverage our skills to enable IT staff to transform with higher level roles and tasks.

Integration, Migration, and Expansion Services
Move existing physical & virtual workloads easily, or determine technical requirements to support increased workloads while maximizing performance. Includes tuning, validation, and documenting ongoing run processes. Leverage migration assessment planning documents to perform necessary migrations.

Regulatory compliance
The ThinkSystem DM Series enclosures conform to the following regulations:

FCC Part 15, Class A; UL 60950-1
ICES-003, Class A; CAN/CSA-C22.2 60950-1
NOM
CE Mark (EN55032 Class A, EN55024, IEC/EN60950-1, IEC/EN62368-1); ROHS Directive 2011/65/EU
EAC
CCC GB 4943.1, GB 17625.1, GB 9254 Class A; CELP; CECP
VCCI, Class A
CNS 13438, Class A; CNS 14336-1
KN32/35, Class A
AS/NZS CISPR 22 Class A
Interoperability
Lenovo provides end-to-end storage compatibility testing to deliver interoperability throughout the network.

The ThinkSystem DM7100F Unified All Flash Array supports attachment to Lenovo servers by using NVMe over Fibre Channel (NVMe/FC), NAS (NFS and CIFS/SMB), iSCSI, and Fibre Channel storage connectivity protocols.

For end-to-end storage configuration support, refer to the Lenovo Storage Interoperation Center (LSIC):
https://datacentersupport.lenovo.com/us/en/lsic
Use the LSIC to select the known components of your configuration and then get a list all other supported combinations, with details about supported hardware, firmware, operating systems, and drivers, plus any additional configuration notes. View results on screen or export them to Excel.

Cluster interconnect
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 34 Cluster interconnect
The following table lists the Ethernet storage switch that can be used with the ThinkSystem DM7100F Unified All Flash Array for cluster interconnect and MetroCluster IP configurations.

Table 18. Ethernet storage switch
Description
Part number
BES-53248 Ethernet Storage Switch: 16x SFP ports and 2x QSFP ports active, 2 PS (CTO only) 7D2SCTO1WW
For more information, see the BES-53248 Ethernet Storage Switch for Lenovo Product Guide:
http://lenovopress.com/lp1226
Fibre Channel SAN switches
Lenovo offers the ThinkSystem DB Series of Fibre Channel SAN switches for high-performance storage expansion. See the DB Series product guides for models and configuration options:

ThinkSystem DB Series SAN Switches:
https://lenovopress.com/storage/switches/rack#rt=product-guide Rack cabinets
The following table lists the supported rack cabinets.

Table 19. Rack cabinets
Part number
Description
93072RX
25U Standard Rack (1000mm)
93072PX
25U Static S2 Standard Rack (1000mm)
7D6DA007WW
ThinkSystem 42U Onyx Primary Heavy Duty Rack Cabinet (1200mm) 7D6DA008WW
ThinkSystem 42U Pearl Primary Heavy Duty Rack Cabinet (1200mm) 93604PX
42U 1200mm Deep Dynamic Rack
93614PX
42U 1200mm Deep Static Rack
93634PX
42U 1100mm Dynamic Rack
93634EX
42U 1100mm Dynamic Expansion Rack
93074RX
42U Standard Rack (1000mm)
7D6EA009WW
ThinkSystem 48U Onyx Primary Heavy Duty Rack Cabinet (1200mm) 7D6EA00AWW
ThinkSystem 48U Pearl Primary Heavy Duty Rack Cabinet (1200mm) For specifications about these racks, see the Lenovo Rack Cabinet Reference, available from:
https://lenovopress.com/lp1287-lenovo-rack-cabinet-reference For more information, see the list of Product Guides in the Rack cabinets category:
https://lenovopress.com/servers/options/racks
Power distribution units
The following table lists the power distribution units (PDUs) that are offered by Lenovo.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 35 Table 20. Power distribution units
Part
number
Feature
code
Description
0U Basic PDUs
00YJ776
ATZY
0U 36 C13/6 C19 24A 1 Phase PDU
N
Y
Y
N
N
N
N
N
N
Y
Y
Y
N
00YJ777
ATZZ
0U 36 C13/6 C19 32A 1 Phase PDU
Y
Y
N
Y
Y
Y
Y
Y
Y
N
N
Y
Y
00YJ778
AU00
0U 21 C13/12 C19 32A 3 Phase PDU
Y
Y
N
Y
Y
Y
Y
Y
Y
N
N
Y
Y
0U Switched and Monitored PDUs
00YJ783
AU04
0U 12 C13/12 C19 Switched and Monitored
48A 3 Phase PDU
N
N
Y
N
N
N
Y
N
N
Y
Y
Y
N
00YJ781
AU03
0U 20 C13/4 C19 Switched and Monitored
24A 1 Phase PDU
N
N
Y
N
Y
N
Y
N
N
Y
Y
Y
N
00YJ782
AU02
0U 18 C13/6 C19 Switched and Monitored
32A 3 Phase PDU
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
00YJ780
AU01
0U 20 C13/4 C19 Switched and Monitored
32A 1 Phase PDU
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
1U Switched and Monitored PDUs
4PU7A81117
BNDV
1U 18 C19/C13 switched and monitored 48A
3P WYE PDU - ETL
N
N
N
N
N
N
N
N
N
N
N
Y
N
4PU7A77467
BLC4
1U 18 C19/C13 Switched and Monitored 80A
3P Delta PDU
N
N
N
N
N
N
N
N
N
Y
N
Y
N
4PU7A77469
BLC6
1U 12 C19/C13 switched and monitored 60A
3P Delta PDU
N
N
N
N
N
N
N
N
N
N
N
Y
N
4PU7A77468
BLC5
1U 12 C19/C13 switched and monitored 32A
3P WYE PDU
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
4PU7A81118
BNDW
1U 18 C19/C13 switched and monitored 48A
3P WYE PDU - CE
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
N
Y
1U Ultra Density Enterprise PDUs (9x IEC 320 C13 + 3x IEC 320 C19 outlets) 71763NU
6051
Ultra Density Enterprise C19/C13 PDU
60A/208V/3PH
N
N
Y
N
N
N
N
N
N
Y
Y
Y
N
71762NX
6091
Ultra Density Enterprise C19/C13 PDU
Module
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1U C13 Enterprise PDUs (12x IEC 320 C13 outlets)
39M2816
6030
DPI C13 Enterprise PDU Plus Module (WW)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
39Y8941
6010
DPI C13 Enterprise PDU Module (WW)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1U C19 Enterprise PDUs (6x IEC 320 C19 outlets)
39Y8948
6060
DPI C19 Enterprise PDU Module (WW)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1U Front-end PDUs (3x IEC 320 C19 outlets)
39Y8938
6002
DPI Single-phase 30A/120V Front-end PDU
(US)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
39Y8939
6003
DPI Single-phase 30A/208V Front-end PDU
(US)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
39Y8934
6005
DPI Single-phase 32A/230V Front-end PDU
(International)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
ANZ ASEAN Brazil EET MEA RUCIS WE HTK INDIA JAPAN LA NA PRC Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 36 39Y8940
6004
DPI Single-phase 60A/208V Front-end PDU
(US)
Y
N
Y
Y
Y
Y
Y
N
N
Y
Y
Y
N
39Y8935
6006
DPI Single-phase 63A/230V Front-end PDU
(International)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
1U NEMA PDUs (6x NEMA 5-15R outlets)
39Y8905
5900
DPI 100-127V NEMA PDU
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Line cords for 1U PDUs that ship without a line cord
40K9611
6504

4.3m, 32A/380-415V, EPDU/IEC 309
3P+N+G 3ph wye (non-US) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
40K9612
6502

4.3m, 32A/230V, EPDU to IEC 309 P+N+G
(non-US) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
40K9613
6503

4.3m, 63A/230V, EPDU to IEC 309 P+N+G
(non-US) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
40K9614
6500

4.3m, 30A/208V, EPDU to NEMA L6-30P
(US) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
40K9615
6501

4.3m, 60A/208V, EPDU to IEC 309 2P+G
(US) Line Cord
N
N
Y
N
N
N
Y
N
N
Y
Y
Y
N
40K9617
6505

4.3m, 32A/230V, Souriau UTG Female to
AS/NZ 3112 (Aus/NZ) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
40K9618
6506

4.3m, 32A/250V, Souriau UTG Female to
KSC 8305 (S. Korea) Line Cord
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Part
number
Feature
code
Description
For more information, see the Lenovo Press documents in the PDU category:
https://lenovopress.com/servers/options/pdu
Uninterruptible power supply units
ANZ ASEAN Brazil EET MEA RUCIS WE HTK INDIA JAPAN LA NA PRC Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 37 Uninterruptible power supply units
The following table lists the uninterruptible power supply (UPS) units that are offered by Lenovo.

Table 21. Uninterruptible power supply units
Part number
Description
55941AX
RT1.5kVA 2U Rack or Tower UPS (100-125VAC)
55941KX
RT1.5kVA 2U Rack or Tower UPS (200-240VAC)
55942AX
RT2.2kVA 2U Rack or Tower UPS (100-125VAC)
55942KX
RT2.2kVA 2U Rack or Tower UPS (200-240VAC)
55943AX
RT3kVA 2U Rack or Tower UPS (100-125VAC)
55943KX
RT3kVA 2U Rack or Tower UPS (200-240VAC)
55945KX
RT5kVA 3U Rack or Tower UPS (200-240VAC)
55946KX
RT6kVA 3U Rack or Tower UPS (200-240VAC)
55948KX
RT8kVA 6U Rack or Tower UPS (200-240VAC)
55949KX
RT11kVA 6U Rack or Tower UPS (200-240VAC)
55948PX
RT8kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)
55949PX
RT11kVA 6U 3:1 Phase Rack or Tower UPS (380-415VAC)
55943KT†
ThinkSystem RT3kVA 2U Standard UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A outlets)
55943LT†
ThinkSystem RT3kVA 2U Long Backup UPS (200-230VAC) (2x C13 10A, 2x GB 10A, 1x C19 16A outlets)
55946KT†
ThinkSystem RT6kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output) 5594XKT†
ThinkSystem RT10kVA 5U UPS (200-230VAC) (2x C13 10A outlets, 1x Terminal Block output) † Only available in China and the Asia Pacific market.

For more information, see the list of Product Guides in the UPS category:
https://lenovopress.com/servers/options/ups
Lenovo Financial Services
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 38 Lenovo Financial Services
Lenovo Financial Services reinforces Lenovo’s commitment to deliver pioneering products and services that are recognized for their quality, excellence, and trustworthiness. Lenovo Financial Services offers financing solutions and services that complement your technology solution anywhere in the world.

We are dedicated to delivering a positive finance experience for customers like you who want to maximize your purchase power by obtaining the technology you need today, protect against technology obsolescence, and preserve your capital for other uses.

We work with businesses, non-profit organizations, governments and educational institutions to finance their entire technology solution. We focus on making it easy to do business with us. Our highly experienced team of finance professionals operates in a work culture that emphasizes the importance of providing outstanding customer service. Our systems, processes and flexible policies support our goal of providing customers with a positive experience.

We finance your entire solution. Unlike others, we allow you to bundle everything you need from hardware and software to service contracts, installation costs, training fees, and sales tax. If you decide weeks or months later to add to your solution, we can consolidate everything into a single invoice.

Our Premier Client services provide large accounts with special handling services to ensure these complex transactions are serviced properly. As a premier client, you have a dedicated finance specialist who manages your account through its life, from first invoice through asset return or purchase. This specialist develops an in-depth understanding of your invoice and payment requirements. For you, this dedication provides a high-quality, easy, and positive financing experience.

For your region-specific offers, please ask your Lenovo sales representative or your technology provider about the use of Lenovo Financial Services. For more information, see the following Lenovo website:
https://www.lenovo.com/us/en/landingpage/lenovo-financial-services/ Related publications and links
For more information, see the following resources:

Lenovo ThinkSystem DM Series product page
https://www.lenovo.com/us/en/c/data-center/storage/unified-storage Lenovo Data Center Solution Configurator
http://dcsc.lenovo.com
ThinkSystem DM Series documentation
http://thinksystem.lenovofiles.com/help/topic/ontap_software/overview.html ThinkSystem DM Series Installation Videos and Video Tutorials https://www.youtube.com/playlist?list=PLLQcIfVNrqzcBW55-7IAe7_Our6nMQxak Lenovo Data Center Support
http://datacentersupport.lenovo.com
Related product families
Product families related to this document are the following:

DM Series Storage
External Storage
Lenovo Storage
Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 39 Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc.
8001 Development Drive
Morrisville, NC 27560
U.S.A.

Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION ”AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
© Copyright Lenovo 2023. All rights reserved.

This document, LP1271, was created or updated on February 8, 2023.

Send us your comments in one of the following ways:

Use the online Contact us review form found at:
https://lenovopress.lenovo.com/LP1271
Send your comments in an e-mail to:
[email protected]
This document is available online at
https://lenovopress.lenovo.com/LP1271
.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 40 Trademarks
Lenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web at https://www.lenovo.com/us/en/legal/copytrade/
.

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo®
Lenovo Services
ThinkSystem®
XClarity®
The following terms are trademarks of other companies:

Intel® is a trademark of Intel Corporation or its subsidiaries.

Linux® is the trademark of Linus Torvalds in the U.S. and other countries.

Excel®,
Internet Explorer®,
Microsoft®,
Windows Server®, and Windows®
are trademarks of Microsoft
Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

Lenovo ThinkSystem DM7100F Unified All Flash Storage Array 41 6600 N Military Trail, Boca Raton, FL 33496 odpbusiness.com

ODP Business Solutions, LLC

Exhibit B - Compensation Schedule

RFP 23-07 Storage Area Network (SAN) Systems Update

Storage System Network and Components: ODP Business Solutions presents the Exhibit B compensation schedule per our response proposal.

ODP Business Solutions - *CONFIDENTIAL
RFP 23-07 Storage Area Network (SAN) Systems
License Maintenance Implementation Shipping
Hardware Professional Services Software
Part number Product Description Qty MSRP Total MSRP Price ODP Price 7D25CTO1WW Controller : Lenovo ThinkSystem DM7100F All Flash Array 1 $1.00 $1.00 Included B94E Lenovo ThinkSystem DM 4U Chassis 1 $11,659.00 $11,659.00 Included B5RJ DM Series Premium Offering 1
B94T Lenovo ThinkSystem DM7100 Controller 2 $25,579.00 $51,158.00 $130,550.00 B72Y Lenovo ThinkSystem DM Series 100Gb 2 port Ethernet Card 2 $2,379.00 $4,758.00 Included BAZ1
2P 100Gb PCIe Ethernet SmartIO Adapter for DM Series AFF Storage 2 $4,979.00 $9,958.00 Included
B94J
Lenovo ThinkSystem DM Series 10/25Gb 4 Port Ethernet Mez Card 2 $1,319.00 $2,638.00 Included
AV1W Lenovo 1m Passive 25G SFP28 DAC Cable 2 $59.00 $118.00 Included A1DQ 3m QSFP+ to QSFP+ Cable 4 $229.00 $916.00 Included AV1Z Lenovo 1m Passive 100G QSFP28 DAC Cable 2 $99.00 $198.00 Included B4BP Lenovo ThinkSystem Storage USB Cable, Micro-USB 1 $15.00 $15.00 Included 6400 2.8m, 13A/100-250V, C13 to C14 Jumper Cord 4 $15.00 $60.00 Included BRJW
Lenovo ThinkSystem DM Series ONTAP 9.11 Software
Encryption 1 $-
B38Y Lenovo ThinkSystem Storage Rack Mount Kit 2U24/4U60 1 No charge B4SU TPM 2 $-
B4SF DM Series CIFS Protocol License 2 $-
B4SG DM Series NFS Protocol License 2 $-
B4SH DM Series iSCSI Protocol License 2 $-
B4SJ DM Series FCP Protocol License 2 $-
B4SK DM Series SnapMirror License 2 $-
B4SL DM Series SnapRestore License 2 $-
B4SM DM Series FlexClone License 2 $-
50TB System
B4SN DM Series Software Encryption License 2 $-
B4SP DM Series SnapManager License 2 $-
B5AZ DM Series SnapVault License 2 $-
B7AQ SnapMirror Synchronous 2 $-
B7N1 NVMe over FC Protocol 2 $-
BH56 S3 Protocol License 2 $-
9170 Storage SubSystem ID 01 1 $-
BAGD Configured with Lenovo ThinkSystem DM7100F 1
B6YR Lenovo ThinkSystem DM Series 4U NVMe, Ship Kit (ROW) 1 No charge $0.00 B738 Lenovo ThinkSystem NVMe Accessory 1 $29.00 $29.00 Included B94V Lenovo ThinkSystem DM Series 4U NVMe Bezel 1 $199.00 $199.00 Included B94W Lenovo ThinkSystem DM Series NVMe Packaging 1 No charge $0.00 BAZ2 DM7100F Controller CFC 2 Included
BD0T Lenovo ThinkSystem DM7100F Product System Label 1 No charge $0.00 B94L Lenovo ThinkSystem DM7100F NVMe Agency Labels 1 No charge $0.00 Auto-Derived Part Items
B4K5 DM Controller Parent MFG Inst 1 $- $0.00
5PS7A92227
Premier Essential 5Y 24x7x4+YDYD ThinkSystem DM7100F AFA Premium 1 $10,008.00 $10,008.00 Included
5AS7A83056 Hardware Installation (Business Hours) for DM7100F 1 $459.00 $459.00 Included 5MS7A24102ThinkSystem DM Onsite Deployment 1 $7,130.00 $7,130.00 Included 7Y62CTO1WW
Storage : Lenovo ThinkSystem DM240N 2U24 NVMe Expansion Enclosure 1 $1.00 $1.00 Included
B6W6 Lenovo ThinkSystem Storage NVMe 2U24 Chassis 1 $4,919.00 $4,919.00 Included B73A ThinkSysytem Storage NVMe Expansion IOM 2 $11,279.00 $22,558.00 Included BC7Y
Lenovo ThinkSystem 46TB (6x 7.68TB NVMe SED) Drive Pack for DM7100F 2 $137,499.00 $274,998.00 Included
AV1Z Lenovo 1m Passive 100G QSFP28 DAC Cable 4 $99.00 $396.00 Included 6311 2.8m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable 2 $15.00 $30.00 Included B6Y6 Lenovo ThinkSystem NVMe Rail Kit 4 post 1 No charge $0.00 9170 Storage SubSystem ID 01 1 $- Included
B6YR Lenovo ThinkSystem DM Series 4U NVMe, Ship Kit (ROW) 1 No charge $0.00 B738 Lenovo ThinkSystem NVMe Accessory 1 $29.00 $29.00 Included BAKT Lenovo ThinkSystem Tied Controller MTM-SN Asset Tag Label 1 No charge $0.00 B6Y5 Lenovo ThinkSystem NVMe SFF Filler 12 No charge $0.00 B739 Lenovo ThinkSystem NVMe End Cap Kit (pair) 1 $29.00 $29.00 Included B70J Lenovo ThinkSystem Storage 2U Packaging 1 No charge $0.00 B6BH Lenovo ThinkSystem DM 2U24 Expansion Chassis CFC 1 Included B6YQ Lenovo ThinkSystem DM240N NVMe Exp System Labels1 No charge Included B6YP Lenovo ThinkSystem DM240N NVMe Exp Product Label1 No charge Included Auto-Derived Part Items
B4K6 DM Expansion Child MFG Inst 1 $-
B5RJ DM Series Premium Offering 1 $-
B4E6 Controller is defined from Linked Product 1 $-
B48J Premier with Essential 1 $-
B5XW SW Offering is defined from linked Product 1 $-
BAGD Configured with Lenovo ThinkSystem DM7100F 1 $-
B0W2 5 Years 1 $-
5PS7A92172
Premier Essential 5Y 24x7x4+YDYD ThinkSystem DM240N
2U24 1 $2,496.00 $2,496.00 Included
5WS7A77737
Premier Essential 5Y 24x7x4 DM7100F 92TB (12x7.68TB
NVMe)Pack Premium 1 $19,999.00 $19,999.00 Included
5MS7B07545CO2 Offset 10 Metric Tonnes 1 $95.00 $95.00 Included 5MS7B07546CO2 Offset 20 Metric Tonnes 1 $191.00 $191.00 Included 5AS7A83040 Hardware Installation (Business Hours) for DM240N 1 $399.00 $399.00 Included Standalone Items
5MS7A35284Professional Services PC 20xx Custom - NA 9 $2,116.00 $19,044.00 $17,874.45 MSRP $444,488.00
Discount 67% -$296,063.55
Sub Total $148,424.45
Tax $12,075.88
Total Extended $160,500.33
YEAR 6 - Quote Requested
TBD Premier Essential 1Y 24x7x4+YDYD ThinkSystem DM7100F Sub Total $27,900.00 TBD
Premier Essential 1Y 24x7x4+YDYD ThinkSystem DM240N
2U24 Included
TBD
Premier Essential 1Y 24x7x4 DM7100F 92TB (12x7.68TB
NVMe)Pack Premium Included
TBD
Lenovo ThinkSystem DM Series ONTAP 9.11 Software
Encryption Included