Simi Valley City Council
May 19, 2025

TRAN2506.SR.MG

CITY OF SIMI VALLEY

MEMORANDUM
M
ay 19, 2025
T
O: City Council
F
ROM: Department of Public Works
S
UBJECT: AUTHORIZE ISSUANCE OF PURCHASE ORDER TO NEW FLYER OF AMERICA, INC. FOR THE ACQUISITION OF SIX (6) BATTERY

ELECTRIC REPLACEMENT TRANSIT BUSES THROUGH CALIFORNIA

ASSOCIATION FOR C OORDINATED TRANSPORTATION (CALACT) /

MORONGO BASIN TRANSIT AUTHORITY (MBTA) COOPERATIVE
CONTRACT NO. 23 -01 NEW FLYER, AND APPROVE A

SUPPLEMENTAL BUDGET REQUEST WITH AN INTERFUND
TRANSFER FROM THE LOCAL TRANSPORTATION FUND (FUND 238 ) TO THE TRANSIT FUND (FUND 750), CP75000015

STAFF RECOMMENDATION
I
t is recommended that the City Council:

1. A
uthorize the City Manager to execute and issue a purchase order for $8,499,359.56 to New Flyer of America, Inc. for the acquisition of six (6) battery electric replacement transit buses through CALACT/MBTA Cooperative Contract No. 23-01 New Flyer;

2. A
pprove a supplemental budget request with an interfund transfer of $ 2,499,359.56 from the Transit Fund (Fund 750) to Local Transportation Fund (Fund 238) to cover acquisition costs, including tariff obligations; and

3. A
uthorize the City Manager or her designee to execute any forms and contract amendments within their authority, provided the Cooperative Contract is in effect.

BACKGROUND AND OVERVIEW
S
imi Valley Transit (SVT) secured $4,800,000 in funding from the California State Transportation Agency Transit and Intercity Rail Capital Program (TIRCP), matched with $1,200,000 in local Transportation Development Act Article 4 (TDA) funds , for a total of $6,000,000. The funds will be used for the acquisition of six (6) battery electric buses approved by the City Council on September 25, 2023.

The acquisition of six (6) battery electric buses will replace the City’s six (6) compressed natural gas (CNG) buses, each of which is expected to reach its useful life benchmark by the time the new battery electric buses are delivered. The City’s CNG buses have been experiencing a high frequency of costly repairs . According to Federal T ransit Administration (FTA) regulations, heavy-duty buses that have reached twelve (12) years of service and/or accumulated 500,000 miles must be replaced. This replacement also AGENDA ITEM NO.

Consent (7)

TRAN2506.SR.MG
aligns with the City’s Zero Emission Bus Rollout Plan , which was submitted to the California Air Resource Board in compliance with the California Innovative Clean Transit (ICT) regulation . The ICT regulation mandates that small transit agencies begin transitioning to zero-emission buses starting in 2026.

FINDINGS AND ALTERNATIVES

The City is a member of CALACT, a cooperative purchasing organization that provides competitively bid contracts that are compliant with federal and state procurement regulations. This cooperative allows the City to select vehicles that best meet its transi t needs. Transit can acquire six (6) battery electric replacement transit buses through CALACT/MBTA Contract No. 23-01 New Flyer, awarded to New Flyer of America, Inc. on July 31, 2024. The initial term of the cooperative contract is for one year , with optional four (4), one (1) year extensions. The contract currently expires on July 31, 2025.

Transit staff scrutinized the available necessary features to improve the City’s fixed-route transit service and received the Best and Final Offer from New Flyer of America, Inc. for the six (6) battery electric replacement transit buses . The total acquisition cost is $8,499,359.56 ($1,416,559.93 per bus). This amount includes the pricing for the vehicles and projected tariffs based on New Flyer of America, Inc.’s best knowledge at the time of this proposal. The actual tariff cost will be calculated and invoiced separately once the buses are queued for production. The City must remit tariff payment within fifteen (15) days of receiving the invoice from New Flyer of America, Inc. to comply with federal mandates.

The proposed delivery of the six (6) battery electric buses is scheduled for the second quarter of 2026. T ransit received the CALACT Assignment to Purchase Agreement #23-01-1184 from CALACT dated April 11, 2025, which may be exercised at any time on or before July 31, 2025. The capital project budget (CP75000015) currently does not have sufficient funds to cover the acquisition cost . Staff is requesting approval of a supplemental budget request with an interfund transfer of $2,499,359.56 from the Transit Fund (Fund 750) to the Local Transportation Fund (Fund 238) . There are no General Fund monies being used for this purchase.

Staff recommends that the City Council authorize the City Manager to execute and issue a purchase order to New Flyer of America, Inc. for $8,499,359.56 for the acquisition of six (6) battery electric replacement transit buses.

The following alternatives are available to the City Council:

1. Authorize the City Manager to execute and issue a purchase order for $8,499,359.56 to New Flyer of America, Inc. for the acquisition of six (6) battery electric replacement transit buses through CALACT/MBTA Cooperative Contract No. 23-01 New Flyer;

2. Approve a supplemental budget request with an interfund transfer of $2,499,359.56 from the Transit Fund (Fund 750) to the Local Transportation Fund (Fund 238) to cover acquisition costs, including tariff obligations;

2 TRAN2506.SR.MG

3. Authorize the City Manager or her designee to execute any forms and contract amendments within their authority, provided the Cooperative Contract is in effect; or

4. D
o not authorize issuance of a purchase order through CALACT/MBTA Cooperative Contract No. 23-01 New Flyer at this time and provide staff further direction.

S
taff recommend Alternative Nos. 1 through 3.

SUGGESTED CITY COUNCIL MOTION
I mo
ve to authorize the City Manager to execute and issue a purchase order for $8,499,359.56 to New Flyer of America, Inc . for the acquisition of six (6) battery electric replacement transit buses through CALACT/MBTA Cooperative Contract No. 23-01 New Flyer; approve a supplemental budget request of $2,499,359.56 from the Transit Fund (Fund 750) to the Local Transportation Fund (Fund 238) with an interfund transfer ; and authorize the City Manager or her designee to execute any forms and contract amendments with their authority.

SUMMARY
S
imi Valley Transit has secured $6,000,000 in state and local funds to acquire six (6) battery electric buses to replace the aging CNG buses . The total project cost is $8,499,359.56, which requires a supplemental budget of $2,499,359.56. The battery electric b uses will be purchased through C ALACT/MBTA Cooperative Contract No. 23-01 from New Flyer of America, Inc., with delivery expected in the second quarter of 2026. City Council approval is requested to proceed with this purchase. ___
_________________________________
Ronald K. Fuchiwaki
Public Works Director
P
repared by: Gian Maria Garcia, Management Analyst
INDEX Page
A
ttachment A – New Flyer of America, Inc. Proposal..…………………….………..4 Attachment B – Assignment to Purchase Agreement #23-01-1184 …….……….46 Attachment C – CALACT/MBTA Contract No. 23-01 New Flyer……………........49 3 Cover Page
Simi Valley Transit
Option Proposal for
Six (6) – 35’ Electric Buses

ATTACHMENT A
Attachment A - New Flyer of America, Inc. Proposal
4 Simi Valley Transit
Option for
Six (6) Electric Buses
Proposal Table of Contents
Tab
1, Letter of Transmittal
Tab 2, Bus Price Summary
Tab 3, Bus Price Change Detail
Tab 4, Tariffs
Tab 5, Payment Terms and Milestones
Tab 6, Bus Warranty Proposal
Tab 7, Bus Training Proposal
Tab 8, Bus Publications Proposal
Tab 9, Bus Tools and Diagnostics Proposal
Tab 10, Bus Contract Spares Proposal
Tab 11, Bus Delivery Schedule
Tab 12, Bus Technical Summary
5 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 1, Letter of Transmittal
Solicitation Requirements:

N/A
New Flyer Response:

Please see attached our Letter of Transmittal to Simi Valley Transit.

Pleas
e indicate your acceptance by providing a Purchase Order to New Flyer, attention:

Adrian Graca, Business Segment Director – Municipal Transit Fleets 204.470.5521
[email protected]
6 Ma
rch 26, 2025
Ben
Gonzales
Deputy Public Works Director (Transit)
Simi Valley Transit
490 West Los Angeles Avenue
Simi Valley, California 93065
Subj
ect: Quotation for Thirty Five-foot Heavy-Duty Electric Transit Buses De
ar Ben,
New Flyer is pleased to submit an option price quotation for the production of Six (6) 35-foot Heavy-Duty Electric Transit buses based on New Flyer’s agreement with Morongo Basin Transit Authority.

The pr
oposed buses will be technically configured as per your previous request under New Flyer Option (SR- 2910).

The
XE35 Electric Bus price per contract is $1,227,294 USD/bus which includes Warranty and Publications, please see the attached Price Change Summary and Detail for further information.

Tari
ffs
Tariffs have been an evolving situation with the full cost impact not yet visible. To allow Simi Valley Transit to budget and seek approvals accordingly, New Flyer’s price proposal includes an estimation of the anticipated tariffs for this build, based on our best knowledge at this time.

New Flyer estimates that the tariffs imposed per bus to be $98,183.53 per bus, which is payable in addition to the per bus price noted above.

New Flyer is committed to working collaboratively with Simi Valley Transit to ensure a transparent and auditable process for assessing and addressing tariff -related costs. Please refer to the Tariff Section within our proposal for more information on tariff impacts associated with this order.

Payment Terms
This contract will include separate invoicing for tariffs and the proposed bus (as defined in the Morongo Basin/CalAct agreement). Each will be invoiced separately to ensure clarity and transparency, resulting in separate payment terms.
• Tariff payment terms are Net 15 days after Line Entry and when Tariff Price Change and Invoice are submitted
• Morongo Basin/CalAct contract payment terms are Net 30 days from acceptance, with bus acceptance required within fifteen (15) days of delivery. 7 We would like to highlight key elements of our proposal:

Warranty: New Flyer exceeds the industry standard warranties in many areas such as our 5 year / 300,000 miles axle warranty (standard warranty is 2 years) and our 3 years / 150,000 miles multiplex warranty (standard competitor warranty is 1 year / 50,000 miles). P lease refer to our Warranty Section within our proposal for more information. Please note that warranty is included in the bus price.

Training: New Flyer Training is an organization within the New Flyer Customer Services group, a division of New Flyer Industries. As a part of the leading manufacturer of heavy-duty transit buses in the United States and Canada, we have access to top design, engineering, propulsion technology, and electrical systems professionals. This allows us to offer the service and expertise to maximize the lifetime value of your fleet.

Please refer to our Training Section within our proposal for more information. Please note that training is not included in the bus price.

Publications: The New Flyer Publications team combines extensive, hands -on technical experience with exceptional writing, illustrating, and publishing skills to create the industry’s benchmark in maintenance manuals. They supply accurate information in a timely manner, assisting the customer in the performance of proper bus maintenance, which adds to the overall reliability and lifetime value of each New Flyer bus on the road. Please refer to our Publications Section within our proposal for more information. Please note that publications are included in the bus price.

Tooling and Diagnostics: Please refer to our Tools and Diagnostics Section within our proposal for more information. Please note that tooling and diagnostics are not included in the bus price.

Delivery Proposal: New Flyer is proposing a complete delivery by Q2 of 2026 based on a receipt of a Notice to Proceed within 60 days of this submission. Please note that delivery is included in the bus price. Our negotiated delivery rate with Morongo Basin/Cal Act is listed in the price detail sheet (attached in this proposal).

Thi
s project allows New Flyer the important opportunity to continue our strong relationship with Simi Valley Transit. It also gives us the opportunity again to delivery some of the most advanced vehicles available in North America. We thank you for your continued interest in New Flyer products and look forward to working with you again in the near future.

This quote is open for acceptance for sixty (60) days. Please indicate your acceptance by providing a Purchase Order to New Flyer of America, attention to Adrian Graca [email protected].

Si
ncerely,
NEW FLYER OF AMERICA INC.

Luci
ana Marques
Technical Sales Manager
431.278.8653
[email protected]
CC:

Walter Yang – Regional Sales Manager
Adrian Graca – Business Segment Director
Cindy Campbell – Contract Administrator
8 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 2, Bus Price Summary
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer’s Price Summary for Six (6) – Electric buses for Simi Valley Transit. 9 Price Change Summary
Property: Simi Valley
Option Origin: 23-335
Sales Release No.: 0
Quantity: 6
Type: XE35
Price Change No.: 1
Revision: H
Date: 26-Feb-25
Each Total
Original Contract Price Base Coach 1,103,900.00$ 6,623,400.00$ Base Bus Price Change Total 123,394.11$ 740,364.66$ Contract Spares Base Bus Price Change Total -$ -$
Total Revised Base Bus Price 1,227,294.11$ $ 7,363,764.66 Add Procurement Fee 1% as per Morongo Basin / Calact
contract #23-01 6,666.67$ 40,000.00$
Total Revised Base Bus Price
Remove Non-Taxable Items
ADA (Non-Taxable) 40,915.73$ 245,494.38$
Delivery (Non-Taxable) 22,025.00$ 132,150.00$
Total Non-Taxable Items 62,940.73$ 377,644.36$
Taxable Bus Price 1,164,353.38$ 6,986,120.28$
Simi Valley, CA Sales Tax @ 7.25% 7.25% 84,415.62$ 506,493.72$ Total Taxable Base Bus Price 1,248,769.00$ 7,492,614.00$ Total Revised Base Bus Price with Sales Tax 1,318,376.40$ 7,910,258.38$ Estimated Tariffs 98,183.53$ 589,101.18$
Total Revised Bus Price with Estimated Tariffs (Before Taxes) 1,325,477.64$ $ 7,952,865.84 Authorized Signatures:

New Flyer Authorization:

Signature:

Title:

Date:

Property Authorization:

Signature:

Title:

Date:

Items Included in Base Bus Price
Sales Tax
Total Revised Contract Price (Excluding Estimated Tariffs) Estimated Tariffs
3/26/2025
10 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 3, Bus Price Change Detail
Solicitation Requirements:

N/A
New Flyer Response:

Please see attached New Flyer’s Price Detail Sheet.

Thi
s sheet includes all price changes that are required to go from the base bus to the proposed configuration, as requested.
11 Price Change Detail
Property: Simi Valley
Option Origin: 23-335
Sales Release No.: 0
Quantity: 6
Bus Type: XE35
Data
Price Change Type Reference No. Option No. Option Group SRCR No. Description Price per coach Extended Total Base Bus Price Change 1 204 Suspension Rear Rear Stabilizer Bar 1,287.37$ 7,724.22$ 2 205 Tires Change to NFIL supplied Tires and change wheels to Alcoa 22.5" x 8.25" aluminum. Machined (brushed) Durabright finish. 5,723.09$ 34,338.56$ 3 246 Air, Brake & Lev System
Change air dryer to Bendix AD-IP Tandem air dryer with IPC (Integrated Puraguard Cartridge). Together will all air systems to match SR2910 (289.99)$ (1,739.94)$
4 269 PA System Change AVA ALV PA Amplifer the same as SR2910 (144.73)$ (868.40)$ 5 273 Exterior Lamp Change all exterior lights to match SR2910 (157.17)$ (943.05)$ 6 280 Passenger Signal Change push button and all other passenger signals to match SR2910 (20.54)$ (123.23)$ 7 277 Interior Lighting Change interior compartment lights to match SR2910 3,802.85$ 22,817.09$ 8 286 Elect - Instrument & Switch
Change interior switches and controls to match SR2910, Add side console lighting - LED lamps, Add sweeper switch in the side console 3,802.85$ 22,817.09$
9 304 Paint & Decal
English / Spanish. Passenger compartment decals are the decals within the area of the coach designed for the seating of passengers and that are intended primarily for passenger viewing. 241.22$ 1,447.32$ 10 350 Drivers Control Add adjustable pedals throttle and brake 1,251.92$ 7,511.51$ 11 420 Body A/P Before Paint Change exterior compartment features to match SR2910 / Roof hatches to match SR2910 3,784.76$ 22,708.56$ 12 422 Body A/P After Paint Change interior compartment and panel features to match SR2910, Add Dash panel access door. (1,593.26)$ (9,559.57)$ 13 450 Flooring A/P Change interior flooring to match SR2910 (389.43)$ (2,336.55)$ 14 450 Flooring A/P
Change wheel house to Limousine Grey, gelcoat. An LED aisle light is provided on the streetside. Also, SST scuff guards are provided. (382.33)$ (2,294.00)$
15 460 Windows Change windows to match SR2910 129.85$ 779.08$ 16 470 Destination Signs Change destination signs to match SR2910 (1,153.50)$ (6,921.01)$ 17 480 Mirrors Change Mirrors to match SR2910 (33.86)$ (203.18)$ 18 491 Door Exit Change exit door to match SR2910 3,514.40$ 21,086.41$ 19 526 Seating & Stanchions Change passenger seats to match SR2910 17,233.61$ 103,401.68$ 20 526 Seating & Stanchions Change Driver seat to match SR2910 750.54$ 4,503.24$ 21 422 Body A/P After Paint
Add Interior Fan - Bergstrom, 12 Volt, black - dash fan located 3.5" right of center, Add fan under front destination sign - located

41.25" to the left of center, Add fan under front destination sign - located 41.25" to the left of center, one dash fan at side console switch location at side console 425.66$ 2,553.98$
22 600 Customer Options Add 3 SDS trays 798.04$ 4,788.27$ 23 600 Customer Options
Add power and ground only for 36" Genfare FastFare - to be supplied and installed by Simi Valley box grounded to chassis, ground strap inside pedestal. 74.79$ 448.75$
24 600 Customer Options Add drivers storage box behind seat - basic box with lift and turn compression latch no key 431.68$ 2,590.06$ 25 600 Customer Options
Add curbside front equipment box - half sized located aft of the luggage rack paddle latch no lock black equipment box dimension

21.66"x19.21"x11.05 Change fire extinguisher location to being mounted on the front curbside luggage rack, Change safety triangles location to equipment box on curbside luggage rack. 110.78$ 664.66$ 26 600 Customer Options Add take one - mounted on the SDS box encl facing rearward, lower SDS face. 340.79$ 2,044.72$ 27 600 Customer Options
Add registration maintenance holder one One 9.5"x6" polycarbonate registration holder On board info station with two 8.5x11 Message Centers and four 4x9 literature pockets supplied by OBIC Transit Information Products 14.18$ 85.07$ 28 600 Customer Options Add provisions for Radio / Communication system - installation of antenna cabling and ground plate 45.53$ 273.16$ 29 600 Customer Options
Add Kidde Dual Spectrum system fire detection sensors - four infrared sensors in engine compartment. 5 lb Kidde Purple K agent tank without pressure switch. 9,703.37$ 58,220.20$
30 600 Customer Options
Add Sportworks,APEX2, Fat tire, front mounted.SST, satin anti glare finish. With bike rack deployment indicator with spanish and english instructions, Bike rack deployment switch 2,467.26$ 14,803.53$ 31 600 Customer Options
Add Iris/Irma automatic passenger counter system, added to exit door Annual service fees, cellular data service, and software renewals to be billed directly to end client 31,902.64$ 191,415.86$
32 600 Customer Options Add Registration maintenance holder - mounted on street side of SDS enclosure behind driver 8.17$ 49.02$ 33 600 Customer Options Add Safety vision Video Surveillance system - interior and exterior Camera same as SR2910 16,204.42$ 97,226.52$ 34 600 Customer Options Add Saftey Vision Software, Support and Warranty 205.50$ 1,233.00$ 35 600 Customer Options Add Saftey Vision First Article Pre-Delivery Inspection 525.15$ 3,151.00$ 36 600 Customer Options Add Saftey Vision Post-Delivery Inspection- per SR 753.50$ 4,521.00$ 38 Delivery Deliverable Add Delivery Charge Morongo Basin Contract #23-01 22,025.00$ 132,150.00$ Base Bus Price Change Total 123,394.11$ 740,364.66$ Grand Total 123,394.11$ 740,364.66$
12 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 4, Tariffs
Solicitation Requirements:

N/A
New Flyer Response:

Tariffs have been an evolving situation with the full cost impact not yet visible. To allow Simi Valley Transit to budget and seek approvals accordingly, New Flyer’s price proposal includes an estimation of the anticipated tariffs for this build, based on our best knowledge at this time.

We estimate the impact of Tariffs on this build to be $98,183.53 per bus.

Per Section Section GC 9.6 9.5 of Contract/RFP #23-01, changes in regulation or law will result in a price change, upwards or downwards. Should tariffs or regulatory changes affect the cost of materials, production, or services, or result in a change by Simi Valley Transit in the number of units to be procured, New Flyer reserves the right to adjust pricing accordingly.

We understand the importance of budgeting therefore, New Flyer is updating our processes to provide estimates and updates to the expected value of the tariffs through the Pre-Production and Production process. These estimates are based on estimated material content with the highest publicly stated tariffs to date without duty drawbacks or exemptions.

New Flyer will provide estimates of the tariff impact:
• At the time of Option Price Proposal
• At the Pre-Production Meeting
• 30 days after all Code 1 MRL items are closed and the Bill of Material is frozen The Price Change reflective of actual Tariff costs, will be calculated at the time of line entry and will be provided with auditable backup to Simi Valley Transit. The amount will be calculated through New Flyer’s SRCR (Sales Release Change Request) process and passed through at cost. It will be clearly identified as a Tariff Surcharge on the Price Change.

The payment terms for Tariffs are Net 15 days from the time of the Price Change, auditable backup, and invoice are presented to Simi Valley Transit.

The federal government requires that the importer on record pay for Tariffs 2 weeks from the date they are incurred and provide a bond for tariff payments. New Flyer has provided a bond to the Federal Government for Tariff Payments; therefore, the Tariff payment at line entry is not considered an Advanced Payment, and no additional security is required.

New Flyer is taking an active advocacy role to educate stakeholders on the impact of tariffs on our industry and the economic impact to Transit Agencies. Unforeseen economic factors and changes in laws and regulations create disruption and added costs. We encourage Simi Valley Transit to reach out to your government offices to share the impact of Tariffs on your organization and participate in advocacy outreach where and how you deem appropriate.
13 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 5, Payment Terms and Milestones
Solicitation Requirements:

N/A
New Flyer Response:

This contract will include separate invoicing for tariffs and the proposed bus as defined in the RFP #23-01 agreement, which result in separate payment terms.

Tari
ff Payment Terms
Tariff payment terms are Net 15 days after Line Entry and when Tariff Price Change and Invoice are submitted.

Con
tract Payment Terms
CalAct #23-01 payment terms are Net 30 days from acceptance, with bus acceptance required within fifteen (15) days of delivery.
14 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 6, Bus Warranty Proposal
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer Warranty Proposal.

Pl
ease note that Warranty Pricing is included as part of the Bus Price. 15 CONTRACT DELIVERABLES LIST Warranty
CUSTOMER NAME Simi Valley
BID NUMBER 2024-131
SR #
CUSTOMER CONTRACT #
CUSTOMER PO #

LD DATE
BUS MODEL XE35
QUANTITY 6

MAJOR COMPONENT DESCRIPTION COMMENTS

PROVIDER YEARS MILEAGE
Base Bus Warranty New Flyer of America 2 100,000 Excluding scheduled maintenance items, acts of nature, or normal consumables Basic Bus Structure New Flyer of America 3 150,000 Body, and body structure shall consist of the components that are bolted or riveted to the structure, such as, exterior panels, interior panels, roof, ceiling, and driver’s barrier.

Chassis Structure (Integrity) New Flyer of America 12 500,000 Consists of all components that are welded together to form the main frame (skeleton) and body construction. The structural integrity guarantee covers against a significant loss of structural integrity of the assembly or its functional performance due to non corrosion related failures.

Chassis Structure (Corrosion) New Flyer of America 12 500,000 Consists of all components that are welded together to form the main frame (skeleton) and body construction. The corrosion guarantee covers against a significant loss of structural integrity of the assembly or its functional performance, resulting from a pertinent loss of cross-section due to corrosion caused by normal environmental elements but excludes corrosion caused by aggressive road de-icers such as Magnesium Chloride or equivalents, unless New Flyer approved preventative measures are taken. The warranty shall be void if the Agency fails to conduct corrosion inspections and scheduled preventive maintenance procedures as specified in the Contractor’s maintenance manuals. The Agency shall maintain documentation, auditable by the Contractor, verifying service activities in conformance with the Contractor’s maintenance manuals.

Propulsion System (Traction System,
Controllers/Inverters and Gear Box) Siemens/New Flyer of America 6 300,000 First 5 years covered by Siemens and the 6th year covered by New Flyer. All warranty claims to be submitted to New Flyer.

Batteries (Energy Storage System) Xalt Energy / New Flyer of America 6 300,000 “Capacity fade is the relative reduction of the total amount of energy the battery system can store in a single charge for the purpose of powering the bus as compared to capacity at beginning of life (BOL). Capacity fade is warranted to 80% of BOL total energy capacity at year 6 when;
1) capacity measurements are taken from a balanced ESS, and 2) ESS is maintained in the manner described in the New Flyer Service Manual.” “The string Battery Management System (BMS) controllers and Power Distribution Unit (PDU) are warranted for proper operation up to year 6 when the ESS is maintained in the manner described in the New Flyer Service Manuals.

All warranty claims to be submitted to New Flyer.

Axle (Front and Rear) MAN 5 300,000
Excluding maintenance items & items that are not covered by the OEM's warranty. All friction materials are excluded from this limited warranty. Wear and third party items supplied with the axle (e.g. slack adjuster, seals and bearings, shocks, air bellows, radius rods, brake chambers) are not included in the 5 year warranty. Please see manufacturer's warranty document.

A/C Thermo King 2 Unlimited Some limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled through the local authorized repair facility.

Brake System New Flyer of America 2 100,000 Friction Material Excluded Destination Signs Luminator 6 Unlimited Some limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled through the local authorized repair facility.

Door Systems Vapor 3 150,000 Excluding maintenance items & items that are not covered by the OEM's warranty Air Compressor Cummins 2 Unlimited
Wheelchair Ramp New Flyer of America 2 100,000
Electrical System Parker 3 150,000 Excluding maintenance items & items that are not covered by the OEM's warranty LED Headlights J.W.Speaker 6 Unlimited Warranty covers parts only after first year Paint Axalta 5 Unlimited
Air Dryer Haldex 2 200,000
Alternator EMP 2 100,000
Passenger seats American Seating 5 Unlimited Some limitations and exclusions may apply - Please see manufacturer's warranty document.

Emission Control System Cummins 5 100,000 Some limitations and exclusions may apply - Please see manufacturer's warranty document. All repairs/warranty claims need to be handled through the local authorized repair facility.

LV Batteries Odyssey 2 100,000
Charge Air Cooler EMP 3 150,000
Radiator Fan Drive EMP 3 150,000
New Flyer Connect New Flyer of America 6 Unlimited Warranty covers subscription and system for 6 years.

Towing New Flyer of America 5 300,000
Handling (15%) New Flyer of America 5 300,000
Road Call New Flyer of America 5 300,000
Troubleshooting New Flyer of America 5 300,000

BASE AND EXTENDED WARRANTY
Simi Valley Option # 2024-131 Contract Deliverables XE35 TC.xlsx XE35 Page 1 of 1 Issued 10/3/2024 9:03 AM 16 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 7, Bus Training Proposal
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer Training Proposal.

Pl
ease note that this proposal is for recommended training only. Training courses may be selected by Simi Valley Transit. New Flyer’s training team is happy to advise on selecting the correct training for your needs.

Corresponding prices are not included in the Bus Price. 17 CONTRACT DELIVERABLES LIST CUSTOMER TRAINING
CUSTOMER NAME Simi Valley
BID/OPTION/SR NUMBER 2024-131 CURRENCY:

TECHNICAL SUMMARY Rev Draft 1 USD
BUS MODEL XE35
QUANTITY 6
New Flyer Supplied Training

DESCRIPTION RECOMMENDED MAXIMUM NUMBER OF
STUDENTS PER CLASS QTY HRS. TOTAL SELLING

PRICE AT BID
Operator Orientation (Train-the-Trainer) 6 4 $986.85
Maintenance Orientation 15 4 $986.85
First Responder Orientation 25 4 $986.85
Preventive Maintenance Inspection 10 4 $986.85
Multiplex System 10 32 $7,894.80
Entrance & Exit Doors 10 4 $986.85
Wheelchair Ramp 10 4 $986.85
Brake Systems and Axles 10 16 $3,947.40
Air System and ABS 10 8 $1,973.70
Suspension and Steering 10 8 $1,973.70
Electric Fan Drive 10 4 $986.85
Coolant Loop Fill Procedure 10 4 $986.85
Towing 10 4 $986.85
Body and Structure 10 4 $986.85
Propulsion & ESS Familiarization/HV Safety 6 32 $7,894.80 Propulsion & ESS System Troubleshooting 10 16 $3,947.40 OEM Supplied Training

DESCRIPTION RECOMMENDED MAXIMUM NUMBER OF
STUDENTS PER CLASS QTY HRS. TOTAL SELLING

PRICE AT BID
HVAC Maintenance 8 8 $4,590.00
Fire Suppression 10 8 $5,130.00
Destination Sign 10 8 $4,860.00
Siemens Propulsion Troubleshooting 8 24 $17,010.00
XALT ESS Troubleshooting 8 16 $12,420.00
18 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 8, Bus Publications Proposal
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer Publications Proposal.

Pl
ease note that Publication Pricing is included in the Bus Price. 19 CONTRACT DELIVERABLES PROPOSAL PUBLICATIONS rev a. September 19, 2024 0 Simi Valley Transit PRIMARY CUSTOMER NAME Simi Valley
PUBLICATIONS CUSTOMER NAME Simi Valley Transit
BID NUMBER 2024-131 (based on 23-335)
SR #
BUS MODEL XE35
QUANTITY 6
This is for one XE35 Option Build of
approx 6 Buses Only

DESCRIPTION QTY CUSTOMER DELIVERY UPDATES
(years) COMMENTS
Emergency Responder Guide (8.5x11 laminated paper) 6 With First Bus Delivery 6 Emergency information to be on board each
bus
Operator's Guide (8.5x11 3-hole) 1 With First Bus Delivery 6 Parts Manual 1 Within 30 Business Days After Last Bus Delivery 6 Service Manual 1 Within 30 Business Days After Last Bus Delivery 6 Bus System Drawings Manual (11x17 3-hole regular paper
includes air, electr, hydraulic, cooling, PLC HVAC layouts and schematics) 1 Within 30 Business Days After Last Bus Delivery 6 TIV USB 1 Within 30 Business Days After Last Bus Delivery 6 USB Includes only NF Manuals plus OEM
items below with "*"
Sub Total
This is for one XE35 Option Build of
approx 6 Buses Only

DESCRIPTION QTY CUSTOMER DELIVERY UPDATES
(years) COMMENTS
With First Bus Delivery or Soon After Receiving From OEM Supplier ELFA3 System User Guide (Safety, Installation, Operation, Maintenance, Diagnostics and Parts information documents) 1 " N/A With First Bus Delivery or Soon After Receiving From OEM Supplier XALT Energy Storage System User Guide 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier BTMS System User Manual 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier Unit Operation & Maintenance Manual 1 " N/A *
Intelligaire III Diagnostic Manual 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier TK2 Traction Motor Cooler Service Manual 1 " N/A *
CP08 Cooler System Troubleshooting Manual 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier ABS Maintenance Manual 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier Safety Vision Hardware System Manual 1 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier Luminator Operation & Maintenance Manual 1 " N/A *
With First Delivery or Soon After Receiving From OEM Supplier Dual Spectrum System User Manual 2 " N/A *
With First Bus Delivery or Soon After Receiving From OEM Supplier Hardware User Guides 1 " N/A *
Software User Guides 1 " N/A *
Vansco Multiplexing System OEM Manual (includes only the following)
Destination Sign OEM Manual Set (includes only the following) WABCO ABS System OEM Manual (includes only the following) Modine BTMS Cooling System OEM Manual Set (includes only the following)
New Flyer Standard Bus Publications
OEM Supplier Publications
KIDDE Fire Suppression System OEM Manual Set (includes only the following)
Siemens E-Drive Propulsion System OEM Vendor Manual Set (includes only the following)
Thermo King HVAC OEM Manual Set (includes only the following) EMP Cooling System OEM Manual Set (includes only the
following)
Video Surveillance System OEM Manual Set (includes only the following)
XALT Energy ESS OEM Vendor Manual Set (includes only the following)
20 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 9, Bus Tools and Diagnostics Proposal
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer Tools and Diagnostics Proposal.

Pl
ease note that this proposal outlines New Flyer’s recommended tools and diagnostics package required to maintain the Xcelsior® bus. The package acts as a shopping list for Simi Valley Transit to select from, as required.

The corresponding prices are not included in the Bus Price. 21 CONTRACT DELIVERABLES LIST DIAGNOSTICS & TOOLS
CUSTOMER NAME Simi Valley
BID/OPTION/SR NUMBER 2024-131 US FUNDS
TECHNICAL SUMMARY Rev Draft 1
BUS MODEL XE35
QUANTITY 6

SHIPPING ADDRESS (IF
DIFFERENT THAN ABOVE) COMMENTS DESCRIPTION QUOTED PART # BID QTY

UNIT SELLING
PRICE

EXTENDED

SELLING PRICE
Diagnostic Equipment
for use with all diagnostic software Panasonic FZ55 Toughbook Laptop 6502351 1 $3,537.05 $3,537.05 Product Drivers - NEXIQ.com Nexiq USB Link™ 3 - WIFI/Bluetooth Edition 6494933 1 $1,125.70 $1,125.70 Requires annual renewal Wabco ABS Software (1st yr subscription) 6334596 1 $412.02 $412.02 Software - Wabco ABS 1-yr Renewal 6495817 1 $412.02 $412.02 Contact TK Regional Rep for software Kit - Intelligaire III Diagnostic Cables 6393934 1 $2,410.16 $2,410.16 EMP : Drivers & Downloads (emp-corp.com) EMP Software NPN 1 $0.00 $0.00 Software included in kit Valeo Diagnostic Software & Cables 6499004 1 $622.19 $622.19 Valeo Adapter - Diagnostic 6492163 1 $109.65 $109.65
[email protected] Hanover HELEN Software 6401762 1 $15.45 $15.45 Hanover Keylo Programming Device 6401761 1 $193.13 $193.13 Hanover Keylo Programming Base Station 6401760 1 $270.39 $270.39 http://divapps.parker.com/divapps/iqan/VanscoVMMS.html Vansco Software NPN 1 $0.00 $0.00 http://divapps.parker.com/divapps/iqan/VanscoDLA.html Vansco 1210 Chooser NPN 1 $0.00 $0.00 PVSG Software (parker.com) PVSG Software NPN 1 $0.00 $0.00 Cable - PVSG Interface 6487019 1 $56.74 $56.74
Cable - Transtech VR Interface 6488984 1 $321.60 $321.60 https://promo.parker.com/promotionsite/parker-smart-suspension/us/en/home Smartrider Software NPN 1 $0.00 $0.00 Vapor Class System Diagnostic Interface Kit 6358421 1 $62.37 $62.37 [email protected] Vapor Class System Software NPN 1 $0.00 $0.00 [email protected] Vapor VETC2 Software NPN 1 $0.00 $0.00 Diagnostic Kit - Vanner HBA/EBA 6406922 1 $1,315.92 $1,315.92 Datalogger - Vector GL1000 6473056 1 $3,243.10 $3,243.10 [email protected] Siemens Siadis Software NPN 1 $0.00 $0.00 Siemens PCAN Interface Harness 711447 2 $324.47 $648.93 USB CAN Adapter - Siemens Interface 6402046 1 $448.07 $448.07 [email protected] Mobile Starter Software NPN 1 $3,677.28 $3,677.28 [email protected] XALT Service Tool Software NPN 1 $0.00 $0.00 XALT Interface Cable - Batteries 704950 1 $216.31 $216.31 Troubleshooting & Diagnostics - Modine Modine BTMS Software NPN 1 $0.00 $0.00 [email protected] Danfoss Software - Berendsen Pwr Strg NPN 1 $0.00 $0.00 Cables Kit - Berendsen Pwr Strg 6490120 1 $396.39 $396.39 Service Cable - IRMA APC Analyzer 479892 1 $47.90 $47.90 Ethernet Cable - IRMA APC 6465569 1 $130.10 $130.10
Special Tools & PPE
Kit - Lift Tow Universal 6396565 1 $304.28 $304.28
Kit - Lift Tow Receivers 6396567 1 $1,846.81 $1,846.81
Xcelsior Flat Tow adapter (2 pcs. Per set) 6395097 1 $3,668.43 $3,668.43 Assy - Frame Flat Towing 902990 1 $6,228.84 $6,228.84
Jacking Adapters 434434 1 $1,121.00 $1,121.00
Tool - Sway Bar Bushing Removal 566804 1 $452.13 $452.13 Repair Kit - Disc Brakes & Calipers 6408310 1 $5,088.42 $5,088.42 Torque Multiplier 6314711 1 $2,521.51 $2,521.51
Hub Repair Kit - MAN VOK-08 Frt Axle 6408311 1 $9,022.56 $9,022.56 Optional Hub Removal Hydraulic Tool Kit - MAN VOK-08 6458834 1 $6,575.72 $6,575.72 King Pin Press Kit - MAN VOK-08 Frt Axle 6494532 1 $20,369.61 $20,369.61 Hub Repair Kit - MAN HY1350 RR Axle 6408306 1 $6,671.05 $6,671.05 ABS Sensor R&R Kit - MAN HY1350 RR Axle 6408307 1 $1,213.41 $1,213.41 Pinion Seal Repair Kit - MAN HY1350 RR Axle 6444302 1 $3,081.44 $3,081.44 Differential Repair Kit - MAN HY1350 RR Axle 6444303 1 $10,614.37 $10,614.37 Optional Tool Kit - MAN HY1350 RR Axle 6444304 1 $44,899.78 $44,899.78 Adj Tool - Strg Gear Box Press Relief 6465265 1 $327.84 $327.84 Depth Punch - Strg Gear Box Press Relief 6465266 1 $245.89 $245.89 Flow Meter Tester - Strg Gear Box 140809 1 $1,320.86 $1,320.86 Puller Tool - Pitman Arm 6394270 1 $486.26 $486.26
TK A/C Tool Kit - TE15 R407c 6472762 1 $39,570.90 $39,570.90 Basic Test Kit - Kidde Dual Spectrum 6412463 1 $1,030.84 $1,030.84 Kit - Pressure Test Tool 6493641 1 $1,468.53 $1,468.53
Head Wrench, Dessicant Canister 6485513 1 $286.85 $286.85 Kit - ESS Coolant Pressure Tester 6486719 1 $1,390.27 $1,390.27 Kit - ESS Coolant Pressure Fill 6411553 1 $7,571.81 $7,571.81 Assy, Lift Beam ESS Rack 6485763 1 $5,227.97 $5,227.97
Boom, Forklift Adapter 6485514 1 $3,705.41 $3,705.41
Lifting Adapter Assy - Siemens PEM 6481413 1 $940.23 $940.23 Key, Cam Latch #4 (ESS Triangle Key) 6476226 1 $4.52 $4.52 HV Tools Plug - MSD Blank 869751 6 $432.62 $2,595.73
HV Tools Cap - 6 PK Bus Bar Protective Cvr 6483658 1 $163.50 $163.50 HV Tools Clamp Meter - 1000A Fluke 376 6487900 1 $1,116.65 $1,116.65 HV Tools Fluke 2 in 1 Multimeter - 1587FC 6400746 1 $1,699.73 $1,699.73 HV Tools Conductivity Meter 6489997 1 $739.43 $739.43
HV Tools modular test lead kit 6473267 1 $352.95 $352.95 HV Tools test probe flat blade 6473268 1 $47.62 $47.62
HV Tools test probe back probe 6473269 1 $45.34 $45.34
HV Tools Wiha Insulated Master Electrician's tool kit 6473445 1 $5,642.11 $5,642.11 HV Tools wiha 1/4 in ratchet set insulated SAE 6473447 1 $675.18 $675.18 HV Tools wiha 1/4 in ratchet set insulated Metric 6473448 1 $675.57 $675.57 HV Tools 16 PC 3/8 drive socket set 6473449 1 $682.55 $682.55 HV Tools 3/8 Extension set 6473450 1 $74.90 $74.90
HV Tools 3/8 Extension set 6473451 1 $105.99 $105.99
HV Tools wiha open end wrench insulated metric 6473452 1 $934.46 $934.46 HV Tools wiha open end wrench insulated sae 6473453 1 $1,089.13 $1,089.13 HV Tools Wiha insulated Serrated Tweezers Straight 6473454 1 $95.54 $95.54 HV Tools Wiha insulated Serrated Tweezers Angled 6473455 1 $112.35 $112.35 HV Tools Insulated Torque Wrench 1/4" 6473456 1 $965.38 $965.38 HV Tools Insulated Torque Wrench 3/8" 6472024 1 $1,051.18 $1,051.18 HV Tools Insulated Torque Wrench 1/2" 6473457 1 $1,096.21 $1,096.21 HV Tools torque screwdriver set 6473458 1 $656.29 $656.29 HV Tools insulated crimper 30 - 6 Awg 7" 6473459 1 $55.92 $55.92 HV Tools wire striper 6 - 3/8 overall 20 to 10 6473460 1 $51.50 $51.50 HV Tools insulated water pump pliers v-jaw 6473461 1 $96.97 $96.97 HV Tools insolated hex key set 10pc metric 6473462 1 $288.41 $288.41 HV Tools Long SAE Natural insulated hex key set 12 pc 6473463 1 $372.29 $372.29 HV Tools bit driver 6473464 1 $116.25 $116.25
HV Tools Stubby Bit Driver 6473465 1 $41.20 $41.20
HV Tools Wiha Insulated "bitFlip" Set 6472034 1 $95.65 $95.65 HV Tools Mini Screw Driver set 6473466 1 $99.58 $99.58
PPE ARC Flash Protection Clothing Kit - 2PC Small 6471958 1 $1,047.15 $1,047.15 PPE ARC Flash Protection Clothing Kit - 2PC Medium 6473412 1 $1,047.15 $1,047.15 22 SHIPPING ADDRESS (IF
DIFFERENT THAN ABOVE) COMMENTS DESCRIPTION QUOTED PART # BID QTY

UNIT SELLING
PRICE

EXTENDED

SELLING PRICE
PPE ARC Flash Protection Clothing Kit - 2PC Large 6473413 1 $1,047.15 $1,047.15 PPE ARC Flash Protection Clothing Kit - 2PC XL 6473414 1 $1,047.15 $1,047.15 PPE ARC Flash Protection Clothing Kit - 2PC 2XL 6471962 1 $1,099.50 $1,099.50 PPE ARC Flash Protection Clothing Kit - 2PC 3XL 6471963 1 $1,151.86 $1,151.86 PPE ARC Flash Protection Clothing Kit - 2PC 4XL 6471964 1 $1,209.46 $1,209.46 PPE ARC Flash Protection Clothing Kit - 2PC 5XL 6471965 1 $1,256.59 $1,256.59 PPE ARC Flash Protection Clothing Kit - 1PC Small 6471966 1 $834.97 $834.97 PPE ARC Flash Protection Clothing Kit - 1PC Medium 6473415 1 $834.97 $834.97 PPE ARC Flash Protection Clothing Kit - 1PC Large 6473416 1 $834.97 $834.97 PPE ARC Flash Protection Clothing Kit - 1PC XL 6473417 1 $834.97 $834.97 PPE ARC Flash Protection Clothing Kit - 1PC 2XL 6473418 1 $1,009.41 $1,009.41 PPE ARC Flash Protection Clothing Kit - 1PC 3XL 6471971 1 $989.05 $989.05 PPE ARC Flash Protection Clothing Kit - 1PC 4XL 6471972 1 $1,066.75 $1,066.75 PPE ARC Flash Protection Clothing Kit - 1PC 5XL 6471973 1 $1,034.74 $1,034.74 PPE Balaclava Head Cover one size fits all 6473440 1 $56.09 $56.09 PPE Hard Hat and Face Shield one size fits all 6368561 1 $390.39 $390.39 PPE Harness - Fall Body Arc Flash (425 lbs) 6700155 1 $1,494.26 $1,494.26 PPE Black electrical glove kit, Size 7 6471976 1 $154.49 $154.49 PPE Black electrical glove kit, Size 8 6473420 1 $162.23 $162.23 PPE Black electrical glove kit, Size 8.5 6471978 1 $148.08 $148.08 PPE Black electrical glove kit, size 9 6471979 1 $150.11 $150.11 PPE Black electrical glove kit, Size 9.5 6473421 1 $148.08 $148.08 PPE Black electrical glove kit, size 10 6473422 1 $146.00 $146.00 PPE Black electrical glove kit, Size 10.5 6473423 1 $215.07 $215.07 PPE Black electrical glove kit, size 11 6473424 1 $154.49 $154.49 PPE Black electrical glove kit, size 12` 6473425 1 $148.08 $148.08 PPE HV Blanket 3' x 3' 6473431 1 $445.51 $445.51
PPE Blanket Clamp 9-1/2" L, 5" Opening 6473432 1 $39.11 $39.11 PPE Glove Dust 0.5oz 6473433 1 $15.60 $15.60
PPE Rescue Hook 6FT 6400745 1 $691.49 $691.49
PPE Defibrillator Adult 6502239 1 $2,920.77 $2,920.77
PPE Brady Personal Lockout Pouch Kit 6494427 1 $58.61 $58.61 PPE Steel Lock Hasp with Tab 6473442 1 $17.58 $17.58
PPE American lock A1106RED 6473443 1 $24.65 $24.65
PPE Lock Out Tag (pk of 25) 6473444 1 $25.94 $25.94
PPE Hv Warning sign 6473436 1 $19.64 $19.64
PPE Arc Flash Warning sign 6473437 1 $14.17 $14.17
PPE steering wheel covers 6473439 1 $73.96 $73.96
PPE Cart - Safety Barricade System (up to 75ft) 6491772 1 $1,553.08 $1,553.08 PPE Tape - Red HV Safety 6491845 1 $45.86 $45.86
23 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 10, Bus Contract Spares Proposal
Solicitation Requirements:

N/A
New Flyer Response:

No spares have been requested at this time.
24 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 11, Bus Delivery Schedule
Solicitation Requirements:

N/A
New Flyer Response:

New Flyer’s schedule for the proposed buses has not been determined, exact dates are not available at this time. Estimated line entry is Q2 2026. A delivery schedule will be forwarded to you when the dates have been determined.
25 Simi Valley Transit
Option for
Six (6) Electric Buses
Tab 12, Bus Technical Summary
Solicitation Requirements:

N/A
New Flyer Response:

Please see the attached New Flyer Technical Summary for the proposed bus. 26 Family Family Description Feature Feature Description Comments 100-00 XCELSIOR COACH LENGTH X35 Xcelsior - 35' coach.
100-03 STRUCTURAL MATERIAL CAR Carbon steel/ferritic sst. 100-05 EPA CALENDAR YEAR 024 2024
100-0K SIEMENS GENERATION EF3 ELFA 3
100-0Y BUS MODEL YEAR 026 2026
201-01 FRONT BUMPER NFI Romeo Rim, three piece, front bumper. 201-03 FRONT TOWING PROVISIONS 001 Basic set-up, incorporated in front chassis. Tow adapters are required.
201-05 REAR BUMPER NFI Romeo Rim, three piece, rear bumper with anti-ride feature. 203-01 FRONT AXLE 002
M.A.N. VOK-08-F, GAWR 18,078 lbs. With disc brakes. Hub mount, Knorr cylinders, Ferodo lining with low copper (<5%) brake pads.
203-02 SECUREMENT OF BRAKE
LININGS NFI Bonded.
203-06 SHOCK ABSORBERS NFI Koni.
203-07 FRONT STABILIZER BAR PVD Required.
203-0A FRT AXLE AND WHEEL SPLASH
APRONS 001 Basic, full width, fore of axles and wheels. 203-0B RADIUS ROD BUSHINGS WIN Windowed
204-01 REAR AXLE 002
M.A.N. 5.67:1. Model HY-1350-F. GAWR 28,660 lbs. With disc brakes, hub mount, Knorr cylinder, Ferodo lining with low copper (<5%) brake pads.
204-03 REAR AXLE GEAR OIL SYN Synthetic.
204-04 REAR STABILIZER BAR PVD Required.
204-09 REAR AXLE DRAIN PLUGS EXT Magnetic external hex head. 204-0A REAR AXLE MUD FLAP ONE One aft of rear axle. (Requirement is determined by local climate, ice build-up, high ambient temperature.)
204-0C REAR WHEEL MUD FLAP 002 One aft of each rear wheel. 205-01 TIRE SUPPLIER 001 NFIL supplied tires.
205-06 WHEELS ALM Alcoa 22.5" x 8.25" aluminum. Machined (brushed) Durabright finish.
205-0J STEERING AXLE TIRES 003 305/70R/22.5, Michelin X InCity Z (65 mph). 205-0M REAR AXLE TIRES 003 305/70R/22.5, Michelin X InCity Z (65 mph). 209-01 POWER STEERING PUMP ELC Berendsen electric power steering pump. Mounted at the front streetside.
209-02 POWER STEERING HOSES GAT Gates G2XH
209-03 POWER STEERING DIAGNOSTIC
FTGS REQ At steering box.
209-05 POWER STEERING RESERVOIR REQ Required.
209-06 POWER STEERING FLUID
INDICATOR CAB Light required at the Cabin coolant fill door. 209-08 POWER STEERING DRAIN PLUG MAG Magnetic plug.
209-09 POWER STEERING UNIT VTX ZF TAS85, power assisted, frame mounted. 209-0A POWER STEERING SYSTEM
FLUID DEX Dexron III, mineral based.
209-0B POWER STEERING SENSOR REQ Hydraulic level sensor required. 219-01 FUEL/PROPULSION SYSTEM 1XE Siemens E-Drive.
27 219-05 AIR COMPRESSOR V01 VMAC EC20, Liquid cooled rotary screw compressor powered by 600 VDC motor
219-0D ROAD SPEED 065 Top road speed is governed. Set at 65 MPH (105 KPH). 219-0M TRANSMISSION/HYBRID
DRIVE/TRACTION MOTOR 023 SIEMENS PEM 1DB2016 FT traction motor, 230 KW. Launch Gradeability at GVWR: 14.8% (35' and 40'), 18.6% (60'). 219-0N EBUS REGENERATIVE BRAKING 005
0-10% driver controlled with accelerator pedal, 30% with accelerator pedal release, remaining 70% blended with brake application reaching 100% by 15psi.
219-0P TRANSMISSION SHIFTING NFI Foot on brake enables shift when in neutral. 231-0F COOLANT FLUID/ANTIFREEZE 001 50/50 pre-mixed distilled water with ethylene glycol with anti- corrosion additive and bittering agent. Pink fluid.
246-01 AIR COMPRESSOR DISCHARGE
LINE NFI Teflon 2807 SST braided hose.
246-02 BASIC AIR TANKS B01
Combo Tank 1 (Wet Tank + Primary Brake Tank), Combo Tank 2 (Front Axle Kneeling Tank + Accessory Air Tank), Secondary Brake Tank.
246-04 AIR TANK DRAIN VALVES MNL Manual 1/4 turn valve. 246-06 WET TANK DRAIN VALVE 12V 12V Haldex auto-moisture ejection valve. 246-09 RIDE HEIGHT SENSORS SP2 SmartRider electronic leveling system on front axle and Barksdale mechanical leveling valves on center/rear axles. 246-0A RIDE HEIGHT SETTINGS,
NORMAL SR1 Front ride height is 4.0" axle to bump stop. 246-0E DOOR INTERLOCK EXT Applied to exit door. Foot on brake to release interlock, applied via multiplex system programming.
246-0G DRIVER'S PARK BRAKE ALARM 001
If the Master Run switch is in the OFF or PARK positions, the kneeling alarm is triggered to alert the driver that the park brake is not set.
246-0H PARK BRAKE PRESSURE
SETTING NFI 40 psi auto-apply park brake valve. 60 psi pressure switch for park brake light activation.
246-0K AIR DRYER 004 Bendix AD-IP Tandem air dryer with IPC (Integrated Puraguard Cartridge).
246-0M AIR DRYER LOCATION RST Under the rear step.
246-0U PARK BRAKE ACTUATION PUL Pull To Apply.
246-0V PARK/EMERG BRAKE
LOCATION PSC Park brake control location - on side console panel. 246-13 FRONT TOW CONNECTOR NPT Male 1/4" NPT fitting with Series 20/30 coupler fitting, with tag.
246-14 FRONT AIR CONNECTOR
ARRANGEMENT SS1 Located below the bumper, streetside.
246-15 FRONT AIR CHARGE
CONNECTOR NPT Male 1/4" NPT fitting with Series 20/30 coupler fitting, with tag.
246-16 REAR AIR CHARGE FITTING
LOCATION CFU At curbside under fusebox.
246-17

REAR AIR CHARGE CONNECTOR
TYPE NPT Male 1/4" NPT fitting with Series 20/30 coupler fitting, with tag.
246-1B FLEXIBLE AIR LINES NFI
Synflex colour coded. Green: rear service brakes and supplies.

Red: front service brakes. Brown: parking brake. Black:
accessories and brake hose. Yellow: compressor and governor.

Blue: suspension.
28 246-1E ABS NFI Wabco.
246-1J FRONT CHARGE AIR ROUTING WET Direct charge to wet tank. 246-1K REAR CHARGE AIR ROUTING BFR Connection before air dryer. 246-27 AIR SYSTEM TRANSDUCER
FAULT DETECTION 001 Transducer Fault Detection - Transducer voltage falls to 0V if transducer failure occurs.
260-01 BATTERY MANAGEMENT TRA Transtech regulator w/Low Voltage Disconnect, temperature and current sensors to optimize battery life.
260-02 BATTERY VOLTAGE
REGULATOR 006 Transtech REG24C
260-03 BATTERY VOLTAGE
REGULATOR LOCATION MCU Mounted on MCU/TCU panel.
260-04 BATTERY TYPE / MFR 003
Two Odyssey group 31 Absorbed Glass Mat (AGM)
maintenance free batteries. 1150 CCA. Top posts: 3/8"
positive, 3/8" negative.
260-05 BATTERY CABLES NFI Red heat shrink on 24 volt positive cable end and light blue heat shrink on 12 volt positive cable end.
260-09 BATTERY TRAY NFI
Slide out battery acid resistant polyethylene enclosure with SST sub frame, SST bearings and rubber isolation mounts.

Located aft of the curbside rear wheelhouse. Note: battery access door opens to the side.
260-0C POSITIVE BATTERY
DISCONNECT SW 004 Required with quick access through flip-open door. Uses a micro-switch for propulsion shutdown.
260-0E BATTERY VOLTAGE EQUALIZER V02 Vanner 100 amp.
260-0F JUMP START
MANUFACTURER/TYPE A02 Anderson SB350 red
260-0G JUMP START LOCATION 004 At the RH propulsion compartment strut facing rearward accessible via the propulsion compt. door.
260-0K ENERGY STORAGE SYSTEM
BTRY SUPPLIER/TYPE X3B XALT Energy, High Energy, Gen 3B. 260-0M ENERGY STORAGE SYSTEM
CAPACITY 435 435 kWh total.
260-0T ESS FIRE DETECTORS NFI Integrated in ALL ESS HV Battery enclosures. 260-11 MOTOR/INVERTER RADIATOR
& RESERVOIR 2FA
Two fan roof mounted EMP radiator with propulsion
compartment mounted SST Reservoir with sight glass & low level coolant sensor.
260-12 MOTOR/INVERTER COOLING
PUMP NFI Rotron.
260-15 ROOF FAIRING / SKIRTS
ENCLOSURE XEF Fairing with full length skirts for XE.
260-17 PLUG-IN BATTERY CHARGING 001 Single receptacle mounted at curbside of propulsion compartment.
260-1B BATTERY VOLTAGE EQUALIZER
QUANTITY 001 One
260-1C BATTERY CHARGING
PROGRAM BSC Basic auto charging.
260-1M FUSEBOX HIGH VOLTAGE
INTERLOCK SWITCH REQ Required.
269-01 P.A. AMPLIFIER MFR / TYPE AVA Included with AVA or AVL system. 269-0C GOOSENECK MICROPHONE REI REI, approximately 30" long from base to end of microphone.

Black neck and head.
29 269-0D GOOSENECK MICROPHONE
LOCATION API Inverted, clipped to the A-pillar. Microphone clip is 15.26" from bottom of destination sign closeout panel.
269-0E GOOSENECK MICROPHONE
SWITCH BLT Built into microphone.
269-0G INTERIOR SPEAKER MFR TCB TCB
269-0H PRIMARY INTERIOR SPEAKERS 006 Six: four to light panels, two above rear bench. 269-0K EXTERIOR SPEAKERS,
LOCATION ENT At basic location above entrance.
269-0M EXTERIOR SPEAKER MFR SHE Shekonic
269-0Z PRIMARY PA SYSTEM GSW Gooseneck mic with built-in switch. 269-13 EXTERIOR SPEAKER QUANTITY ES1 One
269-1E EXTERIOR SPEAKER COIL 1CO Single coil
273-01 HEADLIGHTS NFI NFIL Xcelsior LED low beam and high beam headlights. 273-02 DAY RUN HEADLIGHTS REQ Required.
273-03 FRONT TURN SIGNALS NFI NFIL amber LED. Integrated with headlight assembly. 273-06 TAIL LIGHT ARRANGEMENT 005 Red, amber, red, white. 273-07 TAIL LIGHTS MFR 7DB 7" Dialight LED, bolted flange mounted. 273-08 CENTER STOP / DECELERATION
LIGHT SIZE BSC 18" X 1 " Dialight
273-09 WHITE BACK-UP LIGHT MFR DLG 4" Dialight LED, grommet mounted. 273-0A STOP LIGHTS ON WITH
RTRDR/REGEN BRAKE REQ Required.
273-0B STOP LIGHTS ON WITH PARK
BRAKE OR INTERLOCK NFI When park brake or interlock are engaged. 273-0E CENTER STOP / DECELERATION
LIGHTS QTY 002 Two
273-0F CENTER STOP / DECELERATION
LIGHTS LOCATION BSC At lower edge of HVAC door.
273-0H SIDE TURN SIGNALS,TYPE / QTY
PER SIDE 2DL 2 amber Dialight LED Lamps, 12 volt.
273-0J SIDE TURN SIGNAL
FUNCTIONALITY BSC Single intensity, Dialight LED lamps. 273-0K SD TURN SGNL GUARD BRKT,
MATERIAL/CTG ALU Aluminum, painted per paint scheme.
273-0M CURBSIDE TURN SIGNALS
LOCATION 001 Lamps are aft of front and fore of rear wheelhouses. 273-0N STREETSIDE TURN SIGNALS
LOCATION 01F Lamps are fore of all wheelhouses.
273-0P KNEELING/RAMP LIGHT AT
ENTRANCE NFI 2.5" Dialight LED.
273-0T MARKER / CLEARANCE LIGHTS 001 Dialight LED without guard all around. 273-0V REFLECTORS NFI Self-adhesive decals installed at NFIL basic positions. 273-0W REAR LICENCE PLATE LIGHT SMT Smartrend LED.
273-10 TIMED SHUT-OFF,ENTR AREA
LIGHTS BSC The program is set to shut the lights off when the door closes. 273-12 TIMED SHUT-OFF,EXIT AREA
LIGHTS NFI The program is set to shut the lights off five seconds after the door closes.
30 273-1F CENTER STOP / DECELERATION
LIGHTS COLOR RED Red
273-1R MARKER / CLEARANCE LIGHTS
FUNCTIONALITY NFI New Flyer standard marker/clearance light functionality to meet applicable FMVSS/CMVSS regulations.
273-23 MARKER LIGHTS LOCATION NFI New Flyer standard marker light locations to meet applicable FMVSS/CMVSS regulations
273-25 EXTERIOR LIGHTS DAY
Day Run, Night Run, and Night Park modes illuminate the tail lamps, marker/clearance lamps, and license plate lamp.

Mandatory for Canadian customers.
273-26 CENTER STOP/DECELERATION
LIGHT FUNCTIONALITY STP Basic stop functionality.
273-27 CENTER STOP/DECELERATION
LIGHT VOLTAGE 12V 12 Volts.
277-02 INTERIOR PASSENGER
LIGHTING NFI NFIL LED lights, 24 VDC.
277-04 PASSENGER LIGHTING:

OUTPUT INTENSITY 001 0% 1st bank on each side, 100% for the remaining banks. 277-07 EXIT BASEPLATE / ELEC PNL
ACCESS NFI At each exit door, through removable ad frame. 277-0B TINTED LED PASSENGER LIGHT
COVERS B2W Blue for the 1st-2nd banks of lights on each side, the rest are white.
277-0C FAREBOX LIGHT PRE One swivel light with a replaceable LED bulb. 277-0F DRIVER'S LIGHT 001 One sealed 2.5" white high output Smartrend LED light. 277-0K SDS SERVICE LIGHT 1LL One LED lamp, provided at upper front of SDS enclosure. 277-0M SDS SERVICE LIGHT SWITCH
CONTROL BSW With switch.
277-0N PROPULSION COMPARTMENT
LIGHTS TWO Two LED lights.
277-0V REAR DECK STEP LIGHT LED LED.
277-0W

INTERIOR DOOR HEADER

LIGHTS, ANTI-GLARE SHIELD
COLOR
BLK With black anti-glare shield.
277-0Y

INTERIOR DOOR HEADER

LIGHTS/ QUANTITY
(ENTRANCE)
SGL Single strip.
277-11 INTERIOR DOOR HEADER
LIGHTS/ QUANTITY (EXIT) SGL Single strip.
277-1A REAR PLC AND FUSEBOX
SERVICE LIGHTS NFI Provided, LED.
277-2D INTERIOR LED LIGHT
FUNCTIONALITY 001
All banks are dimmable. When doors are open, lights turn on to full intensity. When doors are closed, lights reduce to secondary output intensity.
280-01 PASSENGER SIGNAL CHIMES BSC
One basic electronic chime above driver. Chime has single tone which sounds once for regular activation, twice for wheelchair positions.
280-03 PASSENGER SIGNAL
PULLCORDS YLW Yellow cords are required.
31 280-07 HORIZONTAL PASSENGER
SIGNAL PULLCORDS NFI Set at NFIL designated basic height. All decks. 280-09 LWR DECK VERT PULLCORDS 03A Three: two at first and second streetside pillars and one at second curbside pillar forward of the face of the upper deck. 280-0D SECUREMENT OF VERTICAL
PULLCORDS BSC Looped or clamped to the horizontal depending on the location.
280-0H STOP REQUEST SIGN TEXT ENS Stop Requested - Parada. 280-0J STOP REQUEST SIGN
LETTERING UPP Upper case.
280-0K STOP REQUEST SIGN COLOURS ROW Red letters on a white background. 280-0N NON-60' REAR STOP REQUEST
SIGN TWO Smartrend two sided LED, ceiling mounted, near exit area, standard position.
280-0T PASSENGER SIGNAL TYPE AT
WHEELCHAIR POSITIONS TCH Touch pads.
280-0V PUSH BUTTON SIGNAL AT EXIT 001 Mounted facing aisle on stanchion fore of exit, low profile recessed button.
280-0W PUSH BUTTONS,VERT AND
SEAT STANCHIONS 1FR One aisle-facing push button on streetside lower deck. 280-0Y PUSH BUTTON SIGNALS,FRT

W/HOUSE STANCH TWO
C/S and S/S stanchions aft of the wheelhouse, 46.5" from floor to bottom of switches. Aisle facing , low profile recessed button.
280-19 PUSH BUTTON SIGNAL TYPE NRQ Not required.
284-01 ELECTRONIC CONTROL SYSTEM NFI Vansco.
284-02 SYSTEM VOLTAGE NFI 24 VDC primary, 12 VDC secondary. 284-03 SWITCHES NFI Water resistant.
284-04

SPARE INPUT/OUTPUT PORTS

FOR MULTIPLEX SYSTEM

MODULES
NFI Minimum 10% input and 10% output, per electrical panel location.
284-05 SIDE CONSOLE LIGHTING LED LED lamps.
284-06 HAZARD WARNING LIGHTS NFI Front, side and rear lights flash for hazard warning. 284-07 CUSTOM HAZARD LIGHTS
ACTIVATION 001 When entrance or exit doors are open
284-0B SDS ELECTRICAL PANEL
ORIENTATION FSS Facing streetside.
284-0D SDS ELECTRICAL PANEL
LOCATION BSR Mounted on backside of SDS rack.
284-0F ENTRANCE DOOR CONTROLLER B5P Basic with 5 position settings. 284-0N PROPULSION SYSTEM RESET
SWITCH NRQ Not required.
286-01 INSTRUMENT PANEL TCH LCD touch display screen. Acrylic material with luminescent lighting, with Vansco Instrument Panel Cluster module.
286-02 SHIFT SELECTOR LOCATION NFI located on instrument panel. 286-03 EXTERIOR LAMP TEST NFI simultaneously depress both turn signals. 286-04 SPEEDOMETER VMI
Part of Vansco instrument panel cluster. Set to display miles.

With odometer (the display can be toggled to show Trip1, Trip 2, engine hours). Remove "engine hours" on battery buses. 32 286-05 AUDIBLE SOUND FOR TURN
SIGNALS/HAZARDS BSC Using click sound for turn signal and for hazard warning. 286-06

BRAKE/ACCELERATOR

INTERLOCK DEACTIVATED

WARNING
RED provided by audible alarm and separate red warning lamp on instrument panel. (Must have in California.)
286-0C REGENERATIVE BRAKE DISABLE
SWITCH LOCATION DES Inside destination sign compartment. 286-0D SILENT ALARM REQ Required.
286-0F SILENT ALARM SW LOCATION SCA At side console.
286-0P DIAGNOSTICS PLUG
LOCATIONS 004
Two diagnostic plugs under the front dash (left side of the steering column), at forward face of the SDS barrier (above driver) and on rear panel.
286-0V SWEEPER LIGHT SWITCH REQ Required.
286-0Y SWEEPER LIGHT SWITCH
LOCATION SC1 Required in the side console.
286-1W DRIVER'S SEAT BELT ALARM
LOCATION IPB Indicator light on IP panel with audible buzzer. 289-01 SECUREMENT OF HARNESSES BSC Hellerman tyton clamps, with Panduit releasable cable ties. 296-01 WIRING DECAL,REAR PLC AND
FUSEBOX NFI Provided, laminated.
296-02 WIRING DECAL,SIDE CONSOLE LAM Laminated, shipped loose. 296-07 SIDE CONSOLE DOOR DECAL
LANGUAGE ENG English
298-01 WATER TEST DURATION 010 10 minutes.
298-02 WATER TEST DURATION A/C 001 Water Test with A/C on. 304-01 EXTERIOR PAINT TYPE NFI Axalta Imron Elite high solids polyurethane. 304-03 PAINTED JACK PADS YLW Safety Yellow.
304-04 PAINTED JACK PADS LOCATION USC Under side of the chassis. 304-06 HIGH VOLTAGE SAFETY DECALS REQ Required.
304-07 CORROSION PROTECTION 12Y
Grit blasted frame, moisture cure zinc-rich primer (applied for 12 year protection), anti-chip undercoating, corrosion
preventive coating sprayed inside frame tubes up to roof line. 304-09 EXTERIOR LOGOS,NFIL REQ NFI logos and Xcelsior logos in standard locations. 304-0E PASSENGER COMPARTMENT

DECAL LANGUAGE ENS
English / Spanish. Passenger compartment decals are the decals within the area of the coach designed for the seating of passengers and that are intended primarily for passenger viewing.
304-0F INTERIOR FLEET NUMBER
DECALS REQ Required.
304-0G MAINTENANCE DECAL

LANGUAGE ENG
English. Maintenance decals are the decals that will be referenced primarily when performing maintenance on the coach.
304-0H KNEELING / RAMP DECALS BSC
NFIL basic ramp & kneeling decal (red on white) and an arrow decal (red and black) provided near the kneeling / ramp deployment lights.
304-0J AIR TANK DECALS NFI NFIL basic.
33 304-0M EXT FLEET NUMBERS,NON-
ROOF NRF Required (non-reflective).
304-0N EXTERIOR FLEET
NUMBERS,ROOF NRF Required (non-reflective).
304-0Z INTERIOR LOGOS, NFI REQ NFI logos at standard location. 306-02 FIRE EXTINGUISHERS 5US 5 lb ABC class. With gauge, hose and mounting bracket. UL compliant for US customers.
306-03 FIRE EXTINGUISHER LOCATION LUG Mounted on the front curbside luggage rack. 306-05 SAFETY TRIANGLE LOCATION CSE In equipment box on curbside luggage rack. 350-01 DRIVER'S PEDALS, POSITION /
TYPE A45
Pedals adjustable fore/aft. Brake pedal angle set at 45 degrees from pedal to floor. Throttle pedal angle set at 45 degrees from pedal to floor.
350-04 BRAKE VALVES NFI E6.
350-07 TURN SIGNAL SWITCHES BSC Basic switches, floor mounted. 350-08 DIMMER SWITCH BSC Foot switch located beside side console panel. 350-0D HAZARD WARNING LIGHT SW
LOCATION LEF On side console with additional foot switch plate, left of driver's control plate.
350-0G STEERING COLUMN DAT Douglas Autotech with tilt and telescopic features. 350-0H STEERING WHEEL 20C 3 spoke, 20" diameter hard padded. 350-0M DUAL HORN BSC Provided with splash shield.
400-01 JACKING / LIFTING PADS 001 4" diameter round pads at front and rear chassis. 420-02 EXTERIOR SIDE PANELS NFI Fiberglass.
420-03 REAR RF MOUNTED AIR SCOOP SSP Stainless Steel, painted per paint scheme. 420-04 STREETSIDE PROPULSION
COMPT DOOR SOL Solid door, for cabin heater access.
420-05 CURB & STREET ENG,S/CONS
DOORS,STRUTS BSC Supported by gas struts.
420-06 CURB & STREET ENG COMPT,
BATTERY DOORS,LATCHES CRM Quarter turn chrome plated 5/16" square key latches. Also, used for the separate battery access door.
420-07 CURBSIDE PROPULSION
COMPARTMENT DOOR XE1
Solid door which includes battery disconnect switch access door (using gas strut) and an access door for battery charging system plug.
420-09 DEFROSTER ACCESS DOOR
LATCHES CRM 4 quarter turn chrome plated 5/16" square key latches. 420-0B BATTERY COMPARTMENT
DOOR SOL Solid door located aft of the curb side rear wheel, separate from the engine compartment.
420-0F SIDE CONSOLE DOOR LATCHES CHR Quarter turn chrome plated 5/16" square key quad latches. 420-0G PROPULSION DOOR SCR Screened door with built-in handle. 420-0H PROPULSION DOOR STRUTS TWO Two, the streetside strut has a locking mechanism. 420-0J PROPULSION DOOR LATCHES CHR Quarter turn chrome plated 5/16" square key quad latches. 420-0M REAR LICENSE PLATE
RETENTION SPL Shipped loose.
420-0P RAIN GUTTER NFI 0.44" cross section bonded. drain holes and plugs 420-0R ROOF HATCH INSTRUCTION
LANGUAGE ENS English / Spanish.
420-0T ROOF HATCH SIZE,FRONT X24 24" X 24"
34 420-0U ROOF HATCH TYPE,FRONT MOT Motorized.
420-0V ROOF HATCH VENDOR,FRONT TRA Transpec Worldwide.
420-15 ROOF HATCH SIZE,REAR X24 24" X 24"
420-16 ROOF HATCH TYPE,REAR MOT Motorized.
420-17 ROOF HATCH VENDOR,REAR TRA Transpec Worldwide.
420-1B WIPERS 002 Sprague motors 24 volt electric with Sprague wet arm wipers.

Intermittent.
420-1E WINDSHIELD WASHER BOTTLE 5US 5 US gallon with electric powered pump mounted using 4 weld nuts.
420-1F WINDSHIELD WASHER FILL
LOCATION NFI Accessed via a flip-out door built into the exterior side console access door.
420-1G LOWER DRIVER'S VENT REQ Provided.
420-1H FENDERS MOL Molded polyurethane.
420-1M EXTERIOR UPPER REAR LOU Louvered style fiberglass door for rear HVAC. 420-1N EXT UPPER REAR DOOR
STRUTS 2NL Two, non-locking.
420-1P EXT UPPER REAR
DOOR,LATCHES CHR Quarter turn chrome plate 5/16" square key latches. 420-1T FRONT LICENSE PLATE
LOCATION CEN On center of defroster door.
420-1U FRONT LICENSE PLATE
RETENTION 004 Four inserts.
420-24 WIPERS, MOTOR ARM LENGTH A01 34" long arm.
420-25 WIPERS, WIPER BLADE LENGTH W01 26" long blade.
420-26 WIPERS, SPRAY STREAMS PER
ARM S02 2 streams per arm.
420-2A CABIN COOLANT FILL DOOR BSC Basic hinged door.
420-2B DRIP EDGE FOR REAR CROWN

PANEL/HVAC DOOR REQ
Drip Edge along the bottom edge of the Rear Crown
Panel/HVAC door to divert water entering the
engine/propulsion compartment.
420-2D UPPER CORNER PILLAR DOOR
LATCHES BSC Quarter turn chrome plate 5/16" square key latches. 421-01 INSULATION,SIDEWALL AND
ROOF POL Polyisocyanurate foam. meets Docket 90 spec.
421-03 INSULATION, PROPULSION
COMPARTMENT ACO Noise reduction acoustical foam, retained by perforated aluminum panels.
422-02 CEILING PNLS AFT OF FRT
W/HS INCL RR PLC WHT Antique white plastic, SST trim.
422-03 CEILING / HVAC COVER PANELS
ABOVE FRT W/HS WHT Antique White fiberglass.
422-04 HVAC RTN AIR GRILLE DOOR
LOCK 1QL 2 quad latches.
422-05 ENTRANCE / DRIVER'S AREA

PANELS COLOUR BLK
Black. Includes dash, dest sign c/out, ent. mech. box, driver's o/head panels. and if used, ent. floor heat duct, frt. RH harness cover is black powder coated alum.
422-06 DRIVER'S CEILING PANEL
MATERIAL MEL Melamine.
35 422-07 INTERIOR PIER PANEL
MATERIAL THE Thermoplastic.
422-08 PIER PANEL COLOUR WHT Antique white
422-0A INTERIOR LWR SIDEWALL
MATERIAL MEL Melamine
422-0C INTERIOR SIDEWALL
MELAMINE ALD Almond S-445-GL
422-0D INTERIOR PROPULSION COMPT
ACCESS PANEL HIN A single hinged panel under the rear seat 422-0E INTERIOR UPPER REAR PANEL MRG Bulkhead panel covered with melamine material. With return air grille for RR mount HVAC system.
422-0G MELAMINE UPR REAR INT
PANEL WHT Antique White Gloss
422-0H TRIM,CARPET/MELAMINE UPR
RR INT PANEL SST All SST.
422-0K C/S,S/S RR BULKHEAD ACCESS
PANELS MEL Melamine covered DB plywood.
422-0M HRNS/AIR LINE COVERS AT
UPPER DECK PFB Painted flat black.
422-0N FRT DEST SIGN DOOR LATCHES SQL Short wing quad latches. 422-0P DRIVER'S OVERHEAD PANEL NFI With locker.
422-0R DRIVER'S LOCKER LATCH SQL Short wing quad latch. 422-0T DRIVER'S COAT HOOK AND
STRAP FWD Located on the forward face of the harness cover behind the driver.
422-0U SECURE DIAGNOSTIC STATION 004
Above street side front wheelhouse. Incorporates driver's barrier. With fiberglass, flat panel, instead of Take One pockets.
422-0V SDS ENCLOSURE COLOUR BLK Flat Black.
422-0W SDS ENCLOSURE DOOR
LATCHES 024 Two 5/16" square key quad latch and one tubular key drive in center.
422-13 FRONT SUNVISOR /
ROLLERBLINDS G02 Grey mesh rollerblind with 6" inch solid vinyl at bottom.

Scissor type with 20" travel.
422-14 SIDE SUNVISOR/ROLLERBLIND B02 Black padded sunvisor. 422-15 SQUARE KEY T-HANDLE DRV Located at lower left of driver. 422-16 ENTRANCE MECHANISM BOX
DOOR LATCH 2SW Two short wing quad latches.
422-17 WATCH YOUR STEP SIGN ILL Ceiling mounted illuminated LED above upper deck step. 422-18 GRAB HANDLE NEAR FRONT
ROOF HATCH REQ Required.
422-1B

C/S,S/S REAR BULKHEAD

ACCESS PANELS, OPENING
METHOD
REM Removable access panels.
422-1C WATCH YOUR STEP SIGN TEXT ENS Watch Your Step Pise Con Cuidado. 422-1D WATCH YOUR STEP SIGN TEXT
LETTERING UPP Upper Case.
422-1E WATCH YOUR STEP SIGN TEXT
COLORS YOB Yellow text on Black background.
422-1F WATCH YOUR STEP SIGN
HOUSING COLORS SNW Snowflake White
36 422-1R FRONT DASH, ACCESS PANEL
LATCH BSC Quarter turn, black powder coated 5/16" square key quad latches.
422-1W INTERIOR UPPER REAR PANEL,
TRIM OPTIONS FLT Flat Trim Design
422-21 INTERIOR UPPER REAR PANEL,
OPENING METHOD HGS Hinged at top, held open with gas struts. 422-22 INTERIOR UPPER REAR PANEL,
LATCHES 001 5/16" square key quad latch.
422-23 REAR PLC ENCLOSURE,
LATCHES 001 5/16" square key quad latch.
423-0B AD FRAME, SDS ENCLOSURE,
FRAME MATERIAL CAA Clear Anodized Aluminum
423-0C AD FRAME, SDS ENCLOSURE,
REAR S02 One 20"x14" Ad frame.
450-02 FLOORING PLY
Lower deck uses pressure treated NT ACQ plywood. Upper
deck uses composite for step and floor to the rear
wheelhouses and NT DB ACQ plywood to the rear.
450-03

DRIVESHAFT / TRANSMISSION /
DRIVE MOTOR ACCESS PANELS 3CC
Three panels set in the floor to access the driveshaft, transmission/drive motor and on the composite step to access air compressor.
450-07 TARABUS FLOOR COVERING 028 Masan 4776 Apollo NT (2.2 mm / 0.086" thick), for aisle and underseats.
450-0A STEP TO UPPER DECK YLW Yellow anti-slip coating is applied to the edges and vertical faces of the step.
450-0B FRONT AXLE STANDEE LINE YLW One yellow flooring safety line provided fore of the hump at the front axle.
450-0C ENTRANCE NOSING B01 Nosing is 2" wide yellow anti-skid applied to the ramp. 450-0D EXIT NOSING ALT 2.5" yellow nosing for Altro / Tarabus flooring. 450-0F REAR SEAT RISER COVERING
MATERIAL B01 Same material and colour as used for the flooring. 450-0J DRIVER'S PLATFORM
FLOORING T26 Tarabus, Masan 4776 Apollo NT (2.2 mm / 0.086" thick) 450-0K DRIVER'S PLATFORM TRIM SST SST.
450-0M OUTER WHEELHOUSES B01 SST front and rear.
450-0N INTERIOR FRONT W/HOUSE
(LUGG RACK) COLOURS A05 Limousine Grey, gelcoat. An LED aisle light is provided on the streetside. Also, SST scuff guards are provided.
450-0T TRIM UPPER DECK ALU Aluminum.
450-13 INTERIOR FRONT W/HOUSE
(LUGG RACK), SCUFF GUARDS BSC Standard height scuff guard 450-14 EXIT DOOR, WHEELHOUSE AND
UPPER DECK TRIM, MATERIAL ALU Aluminum Trim
460-01 WINDSHIELDS 72B 72% light transmittance green laminated. With blue shade band for street and curb sides.
460-02 WINDSHIELD PROTECTIVE FILM REQ Required for coach delivery beyond a 500 mile radius of Final Assembly.
460-04 PASS / DRVR'S WINDOWS
MANUFACTURER AGN Arow Global frame mounted.
460-06 FRAMED PASSENGER
WINDOWS BFT Bottom is fixed, top tip-in.
37 460-07 SDS WINDOW FFG Full fixed picture window supported by gas strut. Glazing matches passenger window, fully masked on interior side. 460-09 FRAMED WINDOW GLAZING N01 Grey, 44% light transmittance, laminated. 460-0B FRAMED WINDOW LOCKS 002 Allen key set-screw on slider. 460-0C WINDOW FRAME COLOUR BLK All window frames are black anodized. 460-0D WINDOW EMERGENCY EGRESS NFI
Minimum quantity based on FMVSS requirements, local,
state/provincial, federal regulations or customer spec
whichever is greater.
460-0E SIDE DESTINATION SIGN
WINDOWS CSN Curb side. Fixed clear top and fixed bottom. Bottom matches passenger window glazing. (review 470 for side sign details). 460-0G WINDOW GLAZING
REPLACEMENT RAP Rapid replacement.
460-0H PASS WINDOW LINERS AND
COATINGS A01 0.12" acrylic liners on all windows.
460-0J PASS WINDOW THICKNESS 6MM 6 mm.
460-0M DRIVER'S WINDOW,FRAMED DSN With fore and aft sliding sashes. The forward sash has exterior and interior handles. Non-egress.
460-0N AFT SASH,FRAMED DRIVER'S
WINDOW HLA With interior handle and latch.
460-0P DRIVER'S WINDOW GLAZING LAM Laminated with minimum 70% light transmittance. 470-01 DESTINATION SIGNS MFR H03 Hanover, LED display system, EG4 470-02 DEST SIGN CONTROL UNIT
LOCATION OVR Under driver's overhead panel at forward position of sawtooth panel.
470-06 HANOVER FRT.DEST.SIGNS A01 Amber LED, 17 x 160 pixels. 470-07 FRONT DESTINATION SIGN
GLASS HLM Heated and laminated.
470-0A CURB SIDE DESTINATION SIGN
LOCATION 1WI Basic, at the first window, aft of entrance door. Note: this allows a maximum display width of approximately 40".
470-0D HANOVER CURBSIDE
DEST.SIGNS A01 Amber LED, 8 X 96.
470-0H REAR ROUTE SIGN,LOCATION HDR At the lower center of the rear HVAC door. 470-0M HANOVER REAR ROUTE SIGNS A01 Amber LED, 15 x 48. 470-0P AVA / AVL SYSTEM GMV GMV Synchromatics system
470-10 AVA/AVL LED SIGN LOCATION REQ Required on the HVAC overhead enclosure at front. 470-16

NEW FLYER CONNECT-

DIAGNOSTIC & MONITORING
SYSTEM
WOD Required without driver maneuver awareness system (DMAS). 470-1P AVA/AVL LED SIGN 055 GMV Synchromatics LED sign, amber 7x96 pixel. Supplied by GMV Synchromatics. Cutout size 25.8" x 3.50".
470-20 NF CONNECT SUBSCRIPTION
TERM 002 2 years.
470-22 GEOFENCE REQUIREMENT NRQ Not required
480-02 EXTERIOR MIRROR
MANUFACTURER HAD Hadley.
38 480-03 EXTERIOR SS MIRROR GLASS
STYLE 2PC 2/1 (upper portion is flat, lower portion is convex). 480-04 EXTERIOR SS MIRROR GLASS
SIZE 815 8" x 15"
480-05 EXTERIOR SS MIRROR HEATING
REQUIREMENTS REQ Heated.
480-06 EXTERIOR SS MIRROR POWER
OPTIONS SIR Single remote control. (If two pieces of mirror, then upper piece is remote controlled.)
480-08 EXTERIOR SS MIRROR ARM
FUNCTIONALITY PUL Pull back. Mirror arm is manually returned to its previously set position after deflection.
480-09 STREET SIDE MIRROR MOUNT LOW Low mount.
480-0E EXTERIOR CS MIRROR GLASS
STYLE 2PC 2/1 (upper portion is flat, lower portion is convex). 480-0F EXTERIOR CS MIRROR GLASS
SIZE 815 8" x 15"
480-0G

EXTERIOR CS MIRROR HEATING
REQUIREMENTS REQ Heated.
480-0H CURB SIDE MIRROR POWER
OPTIONS SIR Single remote control. (If two piece mirror, then upper piece is remote controlled.)
480-0K EXTERIOR CS MIRROR ARM
FUNCTIONALITY PUL Pull back. Mirror arm is manually returned to its previously set position after deflection.
480-0V STREET /CURB SIDE MIRROR
W/TURN SIGNAL INM LED, in mirror glass.
480-11 STREET / CURB SIDE HEATED
MIRROR ACTIVATION SSC Controlled by switch at the side console with a light. 480-12 ENTRANCE DOOR MIRROR
VENDOR LUC Lucerix.
480-13 DRIVER'S REAR VIEW MIRROR BFL 8" x 15", black, flat. 480-14 SPOT MIRROR 6DF 6" diameter flat mirror with short arm, located at curbside front.
480-15 EXIT DOOR MIRROR 12C Convex, 12" diameter, mounted on curved modesty panel stanchion.
480-17 ENTRANCE DOOR MIRROR 7C8
7" x 10" convex mounted on ceiling panel; 8.94" from vertical face of mech box and 15.22" from vertical face of destination sign cutout.
480-26 STREET/ CURB SIDE MIRROR
ARM MATERIAL CAR Carbon steel
490-01 ENTRANCE DOOR DRIVE SYS ELC Electric
490-02 ENTRANCE DOOR VAP Vapor slide glide.
490-03 ENTRANCE DOOR LIMIT
SWITCH SET-UP PRX Solid state proximity switch.
490-04 ENTRANCE EMERGENCY
RELEASE VALVE PVD Within mech box.
490-05 ENTRANCE DOOR MAGNETIC
DUMP VALVE REQ required, located at baseplate venting entrance door 490-07 ENTR/EXIT
FRANG.COVER,LANGUAGE ESP English and Spanish.
490-09 ENTRANCE DOOR COLOUR,
INTERIOR BLK Black
490-0B ENTRANCE DOOR HANDLES BLK Black powder coated.
39 490-0K ENTRANCE DOOR GLAZING BSC Full length single piece, 72% green. 490-0V ENTR/EXIT FRANG.COVER PER Perforated cover.
490-0W

ENT AND EXIT DOORS,

INTERIOR AND EXTERIOR

PANEL COLOR
BLK Black Powder Coat
491-01 EXIT DOOR DRIVE SYS ELE Electric with pneumatic emergency release. 491-02 EXIT DOOR MED One rear curbside exit door. Medium Ameriview Vapor Slide Glide, 34.8" between panels.
491-03 SLIDE GLIDE EXIT LIMIT SWITCH PRX Solid state proximity switch. 491-04 EXIT DOOR CONTROL CLA Vapor Class Acoustic Sensing System. Activates door opening and detects obstruction on closing.
491-05 CLASS SYSTEM INSTRUCTION
DECAL ESP English and Spanish, text and characters as per customer requirement.
491-0D EXIT DOOR SENSITIVE EDGE SVE Pneumatic sensitive vertical edge sensor provided at all exit doors.
491-0H EXIT FRANGIBLE COVER
SECUREMENT MAG Magnetic latch.
491-0M EXIT DOOR ASSIST HANDLES 001 Black powdercoated, UPA-3 Aluminum 491-0P EXIT DOOR GREEN LIGHT LED LED green light indicates that the exit door is set to open. 491-0T EXIT DOOR ALARM A01 Sounds bell above the driver when the class sensor is triggered.
491-0U EXIT DOOR GLASS SIZE A01 2/3 top, 1/3 bottom.
491-0V EXIT DOOR GLAZING 6MM 6 mm
491-12 EXIT DOOR GREEN LIGHT
MOUNTING ORIENTATION HOR Exit door green light mounted horizontally on baseplate 526-02 35' PASSENGER SEAT
QUANTITY 032 32
526-04 PASSENGER SEAT
MANUFACTURER USS United State Seating
526-05 USS PASSENGER SEAT MODEL ARI Aries 4MA SST seats. 526-09 REAR BENCH SEAT NFI 1-3-1 hinged seat.
526-0A PASSENGER SEAT MOUNTING CAN Cantilever
526-0B SEAT MOUNTED GRABRAIL SST Stainless steel
526-0C FIRST SEAT, CURBSIDE UPPER
REAR FFA Forward facing.
526-0D FIRST SEAT, STREETSIDE UPPER
REAR FFA Forward facing.
526-0F PASSENGER SEATING BARRIER PED Pedestal mounted barrier. 526-0G SEAT POSITION,FORWARD OF
REAR EXIT FFA Forward facing.
526-0U RECARO DRIVER'S SEAT MODEL B01 Ergo AM80
526-0W DRIVER'S SEAT COVER FBR All fabric.
526-0Y DRIVER'S SEAT BELT BSC Lap and shoulder belt with retractor on left hand side. 526-0Z DRIVER'S SEAT BELT ALARM
SWITCH REQ Required.
526-10 DRIVER'S SEAT BELT COLOR ORA Orange
40 526-11 DRIVER'S SEAT BELT SWITCH 001 Required with 'Fastened" configuration, normally open switch. 526-14 DRIVER'S SEAT BASE RISER
MATERIAL BLK Black powdercoated steel.
526-17 DRIVER'S SEAT HEADREST REQ Required, Fabric headrest. 526-18 WHEELCHAIR
POSITIONS,QUANTITY B01 Two. At basic locations, one aft of the curbside and one aft of the streetside front wheelhouses.
526-19 CS WHEELCHAIR RESTRAINT
SYSTEM VPR Forward facing barrier with V-Pro front restraint. 526-1A SS WHEELCHAIR RESTRAINT
SYSTEM VPR Forward facing barrier with V-Pro front restraint. 526-1D SHOULDER HARNESS,W/CHR

RESTRAINTS ADJ
One restraint bar with height adjustable shoulder harness on curbside and one non-height adjustable shoulder harness secured to structure (pier panel) on streetside.
526-1F STANCHION / GRABRAIL STYLE CUR Curved style vertical stanchions. Using cast SST fittings for vertical and horizontal stanchions.
526-1G OVERHEAD HORIZONTAL

GRABRAILS SST SST
526-1H OVERHEAD GRABRAIL
HANDHOLD STRAPS GPU Grey PVC straps, loose on horizontal stanchions, locations as per customer spec.
526-1J OVERHEAD GRABRAIL
HANDHOLD STRAPS,QUANTITY 006 Six
526-1K COLOR - STANCHIONS AT EXITS
& RR RISER STEP SST SST
526-1M VERT FORE OF S/S FRT
W/HOUSE BLK Black SST
526-1N VERT AFT OF S/S FRT W/HOUSE VSS To match colour of vertical seat stanchions (see Option 526- 1T).
526-1P VERT FORE OF C/S FRT
W/HOUSE YLW Yellow SST
526-1R VERT AFT OF C/S FRT
W/HOUSE SEA To match colour of vertical seat stanchions (see option 526- 1T).
526-1T COLOR - VERTICAL

STANCHIONS AT SEATS SST SST
526-22 FRONT CURBSIDE LUGGAGE
RACK 001 Horizontal tube wrapping around fore, aisle, and aft sides 526-23 FAREBOX GRABRAIL STYLE 002 Wrap around stanchion and basic dash stanchion. 526-25 MODESTY PANEL MATERIAL ALU Aluminum leathergrain. Laminated sandwich construction with aluminum skin on both sides.
526-27 C/SIDE FORE UPR DECK MOD
PNL, GAP NFI Approximately 2" diagonally.
526-29 BARRIER AT STREET SIDE REAR
RISER DBR Double stanchion bar.
526-2M BARRIER FWD OF EXIT(S) UPB Upper panel, 0.5" clear polycarbonate, basic width. 526-2T EMERGENCY INSTRUCTIONS ESP English / Spanish.
526-32 DRIVER'S SEAT, FORE/AFT SEAT
TRAVEL FA1 The fore / aft seat travel is 9.45".
526-37 FRONT CURBSIDE LUGGAGE

RACK COLOR SST SST
526-3B FAREBOX GRABRAIL COLOR BLK Black
41 526-3V SEAT FWD OF REAR BENCH
SEAT FWD Forward facing.
549-01 HVAC UNIT 1 TK9 Thermo King TE15 rear A/C unit.
549-04 HVAC UNIT MOTOR TYPE NFI Brushless motor for primary heating & cooling system. 549-05 REFRIGERANT 407 R-407C freon.
549-06 HVAC AIR INTAKE AIR Recirculated air only.
549-07 HVAC RETURN AIR FILTER RPF TK polyester (disposable) filter. 549-0C HVAC SYSTEM VALVES BVB Brass ball valves with basic handles. 549-0D A/C AND HEATER LINE CLAMPS IDE Ideal.
549-0E A/C COMPRESSOR TND Electric driven compressors integrated into the main HVAC unit.
549-0J HVAC ELECTRONICS TK1 Thermo King Intelligaire 3, valid for A/C or heater units. With limited diagnostic capabilities.
549-0K HVAC CONTROL PANELS TKH Thermo King, installed at the HVAC unit. 549-0N A/C PRESSURE READINGS TK1 Obtained via the Thermo King Intelligaire 3 control panel. 549-0Y HVAC BOOSTER FAN MCC MCC overhead fan with brushless motor. 549-16 BOOSTER PUMP ROT Rotron
549-1A DEFROSTER 004 MCC 3 speed brushless SPAL blower, plastic end-caps, electrically controlled damper with on/off interlock.
549-1E AUXILIARY/CABIN HEATER EV1 Valeo Thermo DC 200 (20 kw) @ 690V electric heater. 580-01 FRONT WHEELCHAIR RAMP NFF NFIL ramp at front door. 32" wide, with 1:7 slope. 580-02 FRONT RAMP CONTROL SWI Ramp switch at driver's instrument panel. 580-08 WHEELCHAIR RAMP,SURFACE FMJ
Covered with Full Metal Jacket anti-skid treatment. The leading edge is yellow FMJ, the side flanges are painted yellow.
580-0F WHEELCHAIR RAMP COUNTER REQ Required.
580-0G

KNEELING/RAMP

DEPLOYMENT WARNING
BEEPER
MED IP68-rated beeper, medium loud fast beep.
580-0H

FRONT KNEELING/RAMP

DEPLOYMENT WARNING

BEEPER LOCATION
BSC Curbside under front mask.
580-15 WHEELCHAIR RAMP COUNTER
LOCATION WDP Dash panel access door.
600-05 BACK-UP ALARM BSC Basic alarm located on curbside. 600-08 FRONT ELECT,TOW
RECEPTACLE COL Cole Hersee part number 12063.
600-0C INTERIOR
FAN(S),MANUFACTURER 12V Bergstrom, 12 volt.
600-0D INTERIOR FAN(S) FAN COLOR BLK Black
600-0E DASH FANS,QTY AND
LOCATION 008 One fan, 3.5" right of center.
600-0G FAN UNDER FRT DEST SIGN
COMPT LCL At approx. 41.25" to the left of center.
600-0J SDS TRAY QUANTITY 003 Three trays total.
600-0M FAREBOX PEDESTAL BSC Stainless Steel Material. Length = 26.56"; Front fore length =

12.36"; Width = 13.96"; Height = 6"
600-0N FAREBOX GF5 36" Genfare FastFare
600-0P FAREBOX,SUPPLIED BY 002 Supplied and installed by customer. 42 600-0R FAREBOX POSITION / HOLES PVD Provided, only for power and ground. 600-0T FAREBOX GROUND STRAP INP Required, farebox grounded to chassis, ground strap inside pedestal.
600-1D CURBSIDE FRONT EQUIPMENT
BOX 004 Half sized (located aft of the luggage rack).
600-1F DRIVER'S STORAGE BOX
BEHIND SEAT CPR Basic box with lift & turn compression latch, no key. 600-1K TAKE ONES,SDS BOX 001 Mounted on SDS encl facing rearward, lower SDS face. 600-1R REGISTR/MAINT HOLDER 005 One 9.5"x6" polycarbonate registration holder 600-26 RADIO,COMMUNICATION
SYSTEM PRV Provisions for system. Installation of antenna (s),cabling and ground plates, as per customer spec.
600-2G VIDEO SURVEILLANCE SYSTEM CIE Interior and exterior cameras. 600-2H VIDEO SURVEILLANCE
SYSTEM,MFR SVI Safety Vision system
600-31 FIRE SUPPRESSION KDD Kidde Dual Spectrum system. 600-32 FIRE SUPPRESSION BOTTLE
LOCATION BSC Streetside behind light panels.
600-33 FIRE DETECTION SENSORS K08 Kidde Dual Spectrum fire detection sensors - four infrared sensors in engine compartment.
600-34 FIRE SUPPRESSION BOTTLE KD1 25 lb Kidde Purple K agent tank without pressure switch. 600-36 FIRE SUPPRESSION DISPLAY
PANEL LOCATION MID Under driver's overhead panel at middle position of sawtooth panel.
600-3V BICYCLE RACK
MANUFACTURER/MODEL 009 Sportworks,APEX2, Fat tire, front mounted. 600-3W BICYCLE RACK MOUNTING BOL Bolted slide-in standoff. 600-3Y BICYCLE RACK REMOVAL BOL Bolted rack.
600-3Z BICYCLE RACK MATL/COLOR SAT SST, satin anti glare finish. 600-40 BIKE RACK DEPLOY INDICATOR
LIGHT REQ Required.
600-42 BICYCLE RACK INSTRUCTIONS ESP English / Spanish
600-5A AUTOMATIC PASSENGER
COUNTER SYSTEM FUL Full system.
600-5B AUTOMATIC PASSENGER
COUNTER VENDOR IR6 IRIS/IRMA (provided by Synchromatics) 600-5K

AUTOMATIC PASSENGER

COUNTER (APC) EXIT DOOR

BASEPLATE SENSOR, QTY
ONE One
600-5M

IRIS/IRMA AUTOMATIC

PASSENGER COUNTER (APC)
MODEL
IRM Matrix
600-67 REGISTR/MAINT HOLDER
LOCATION 007 Mounted on street side of SDS enclosure behind driver. 600-6B GROUND STRAP #1 LOCATION 001 Front of coach, centered on splash guard 600-6C GROUND STRAP #2 LOCATION 001 Rear of coach, street side off of bulkhead. 600-6F FAREBOX PEDESTAL
TREATMENT BFM Black full metal jacket.
43 600-6V CURBSIDE FRONT EQUIPMENT
BOX. LOCK/LATCH TYPE 001 Paddle latch, no lock.
600-73 TAKE ONES, SDS BOX, HOLDER
SIZE 008
On board info station with two 8.5x11 Message Centers and four 4x9 literature pockets supplied by OBIC Transit
Information Products
600-77 DASH FANS, SWITCH LOCATION 001 At side console.
600-79 FAN UNDER FRT DEST SIGN
COMPT, SWITCH LOCATION 001 At side console.
600-7G CURBSIDE FRONT EQUIPMENT
BOX, COLOR BLK Black
600-7N CURBSIDE FRONT EQUIPMENT
BOX. HINGE ORIENTATION 001 Parallel to curbside window. 600-87 BIKE RACK DEPLOYMENT
SWITCH REQ Required.
44 45
4/11/2025
Ben Gonzales
490 West Los Angele
s Avenue
Simi Valley, CA 93065
Dear Ben:

The CALACT-BASI
N TRANSIT Purchasing Cooperative is pleased to make an assignment as detailed in the Assignment to Purchase Agreement.

Additional in
formation is available on the CALACT website at
www.calact.org/purchasingco-op that documents the procurement process used by the Cooperative to solicit and award Contract No. 23-01. Prior to acceptance of the vehicles you order, a Post-Delivery Audit must be conducted by your agency if you are using Federal Transit Administration funding to purchase the vehicle.

Thank you for pur
chasing your vehicles through the Cooperative. Please don't hesitate to contact me if you have any questions at 916-920-8018 or email [email protected].

Sincerely,
Julia Marin
P
rogram Specialist
CALACT
4632 Duckhorn Dr
ive • Sacramento, CA 95834 • Phone (916) 920-8018 • Fax (916) 920-8021

ATTACHMENT B
Attachment B - Assignment to Purchase Agreement #23-01-1184 46 Assignment to Purchase Agreement
Assignment #23-01-1184

The CALACT-Basin Transit Purchasing Cooperative, “Assignor”, hereby assigns to City of Simi Valley, “Assignee”, 6 options to purchase Transit Vehicles (“Vehicles”) from the Joint Procurement Cooperative at a price and under the terms and conditions contained in Assignor’s Contract No 23-01 with the Contractors awarded to on the Procurement. Only those vehicles and optional features may be purchased using the Solicitation and the purchase may only be from a Seller listed on the Schedule. Specifically, the Assignment shall have the right to purchase:

Quantity and Type of Vehicle(s):

(6) New Flyer - 35' BEB Low Floor Transit Buses - XE35 - Class H Total # of Vehicles: 6
Such ability to purchase commenced, per terms of Contract, on 4/11/2025, and may be exercised at any time on or before 7/31/2025. Assignee must communicate any changes in the order in particular cancellation to the Cooperative as soon as possible.

With respect to the Vehicles assigned hereunder and this Assignment, Assignee agrees to perform all covenants, conditions and obligations required of Assignor under said Contract and agrees to defend, indemnify and hold Assignor harmless from any liability or obligation under said Contract. Assignee further agrees to hold Assignor harmless from any deficiency or defect in the legality or enforcement of the terms of said Contract or option to purchase thereunder. Assignee agrees and understands that Assignor is not acting as a broker or agent in this transaction and is not representing Seller or Assignee, but rather is acting as a principal in assigning its interest in the above-referenced assignment to purchase the Vehicles under the Contract to Assignee.

Please be advised that assignment of said vehicles does not constitute a recommendation or endorsement of this product by the Cooperative. The Assignee is responsible for its choice of vehicle product and options selected. Assignee is responsible for vehicle inspection, acceptance and enforcement of any contract provisions. While PreAward verifications of Buy America, FMVSS and Purchaser’s Requirements have been accomplished, Assignee is responsible for Post Award due diligence in this regard.

Purchasing agencies are responsible for and are to exercise due diligence in evaluating the suitability of these vehicles for their operating environment and are responsible for determining their eligibility for funding. In particular, the Cooperative urges you to review the Altoona test report for the vehicle you are purchasing.

Supporting documents for your records may be downloaded from our website at 47 www.calact.org for any reviews or audits your agency will be subject to. Please contact CALACT staff for any assistance you may need at 916-920-8018.

Assignee hereby unconditionally releases and covenants not to sue Basin Transit and/or CALACT upon any claims, liabilities, damages, obligations or judgments whatsoever, in law or in equity, whether known or unknown, or claimed, which they or either of them have or claim to have or which they or either of them may have or claim to have in the future against Assignor, with respect to the Vehicles or any rights whatsoever assigned hereunder.

Julia Marin
Program Specialist
CALACT
"Assignor"

48 ATTACHMENT C
Attachment C - CalAct/MBTA Contract No. 23-01 New Flyer 49 50
51 52