1 (Rev. 9.30.22)
COOPERATIVE/PIGGYBACK PURCHASE AGREEMENT
AGREEMENT SUMMARY:
1. Cooperative/Piggyback
Name:
National Association of State Procurement Officials
(NASPO) ValuePoint
2. Contractor: Pacific Lift and Equipment Company Inc.
3. Cooperative Agency
Agreement Name and
Agreement Number:
Vehicle Service Group, LLC, vehicle lifts and
garage associated equipment, Master Agreement
CW7254
4. Cooperative Agency Initial
Agreement Term:
Start Date: July 11, 2023
End Date
: March 31, 2028
5. Cooperative Agency’s
Agreement-Options to
extend:
N/A
6. Cooperative Agency
Amended Term:
N/A
7. Cooperative Agency
Remaining Options to
Renew:
N/A
8. City of Stockton
Cooperative Purchase
Agreement Term:
Start Date: Upon Execution
End Date: March 31, 2028
9. City of Stockton
Cooperative/ Piggyback
Purchase Agreement
Amount:
Not to Exceed $286,689.32 for the term of the
Agreement.
AGREEMENT
The City of Stockton, a California municipal corporation on behalf of itself and its associated entities ("City"), and the above-named Contractor (“Contractor”), do hereby agree that City shall be granted the pricing, terms, and conditions under the above
referenced Vehicle Service Group, LLC, vehicle lifts and garage associated equipment, Master Agreement CW7254 (“COOP”) as such may be amended from time to time. The COOP and associated documents referenced in the agreement are incorporated herein as
Exhibit A to this City Cooperative/Piggyback Purchase
Agreement (“Agreement”).
Contractor
shall grant such pricing, terms, and conditions to City for all procurements of goods and services, whether taking place on a City purchase order, purchasing card
EXHIBIT 1
2 (Rev. 9.30.22)
(credit card), or other purchasing modality, whether via telephone, via the Contractor website, or via direct purchase at a Contractor retail location.
1. A
greement Term: The Term of this Agreement shall remain in effect from date of the signing of this Agreement through March 31, 2028, unless terminated earlier by the City. If the Cooperative/Piggyback Agency extends the COOP with Contractor by a written amendment, the City has the option to extend the term of this Agreement by written amendment not to go beyond the term stated in the COOP fully executed amendment.
2. I
nsurance and Hold Harmless: In addition to the pricing, terms and conditions stated in the COOP and the associated documents incorporated herein as Exhibit A , Contractor shall, at Contractor’s sole cost and expense and for the full term of the Agreement or any extension thereof , obtain and maintain at least all the insurance requirements listed in attached Exhibit B.
T
o the fullest extent permitted by law, Contractor shall hold harmless, defend and indemnify City of Stockton and its officers, officials, employees and volunteers from and against any and all liability, loss, damage, expense, costs (including without limi tation costs and fees of litigation) of every nature arising out of or in connection with Contractor’s performance of work hereunder or its failure to comply with any of its obligations contained in the agreement, except such loss or damage which was caused by the sole negligence or willful misconduct of the City of Stockton. This obligation is independent of, and shall not in any way be limited by, the minimum Insurance obligations contained in this Agreement. These obligations shall survive the completion or termination of this Agreement
.
3. C
ompensation: City and Contractor do her eby enter into this Agreement for vehicle lifts available in the above-named COOP and associated documents incorporated herein as Exhibit A and referenced in the attached quote Exhibit C . I n no way, shall payment to the Contractor during the term of this Agreement exceed $ 286,689.32 for the purchase of two portable 6- column lifts, two 2- post symmetric lifts, and two remote controls and dock kits. Any person signing this Agreement on behalf of City or Contractor does warrants that he or she has full authority to do so.
4. G
overning Law: California law shall govern any legal action pursuant to this Agreement with venue for all claims in the Superior Court of the County of San Joaquin, Stockton Branch or, where applicable, in the Federal District Court of California, Eastern District, Sacramento Division.
5. Applicable Law: Deliverables must conform with all applicable federal, state, and local laws. Such conformity includes compliance with federal sanctions, and Contractor certifies that it has not and will not engage in prohibited transactions with sanctioned persons or entities.
EXHIBIT 1
3 (Rev. 9.30.22)
This Agreement may be amended only by a written amendment , consistent with the COOP, signed by Contractor and City.
CITY OF STOCKTON PACIFIC LIFT AND EQUIPMENT CO., INC.
By: ______ ____________________
Harry Black, City Manager Signature
Date:
____________________
____________________________
Pri nt name
ATTEST: Title: ________________________
_____________
_______________ [If Contractor is a corporation, signatures must Katherine Roland CMC, CPMC, Interim City Clerk comply with Corporations Code §313] APPROV
ED AS TO FORM:
By: __________________________
___________________________ Signature
Lori Asuncion, City Attorney
__________________________
Print name
Tit
le: _______________________
EXHIBIT 1
4 (Rev. 9.30.22)
EXHIBIT A
EXHIBIT 1
STATE OF CALIFORNIA
PARTICIPATING ADDENDUM NUMBER 7-23-99-48-02
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
Louisiana NASPO ValuePoint Master Agreement Number CW7254 Vehicle Service Group, LLC (Contractor)
This Participating Addendum Number 7-23-99-48-02 is entered into between the State of California, Department of General Services (hereafter referred to as “State” or “DGS”) and Vehicle Service Group, LLC (hereafter referred to as “Contractor”) under the lead state of Louisiana NASPO ValuePoint Master Agreement Number CW7254.
1. SCOPE
A. This Participating Addendum covers the purchase of products and services under the Louisiana NASPO ValuePoint Master Agreement. The Louisiana NASPO ValuePoint Master Agreement is hereby incorporated by reference.
Product/service categories included under this Participating Addendum are identified in Section 5 (Available Products and Services).
B. This Participating Addendum is available for use by California state agencies and local governments. A local government is defined as any city, county, city and county, district, or other local governmental body, school district or corporation empowered to expend public funds. The State Agency Listing (https://www.ca.gov/agenciesall/) provides a comprehensive list of state agencies.
C. Each local government is to make its own determination whether this Participating Addendum and the Louisiana NASPO ValuePoint Master Agreement are consistent with its procurement policies and regulations.
2. TERM
A. The term of this Participating Addendum shall begin upon signature approval by the State and will end March 31, 2028, or upon termination by the State, whichever occurs first.
B. Lead state amendments to extend the NASPO ValuePoint Master Agreement term date are not automatically incorporated into this Participating Addendum.
Extension(s) to the term of this Participating Addendum will be through a written amendment upon mutual agreement between the State and the Contractor.
C. Order placement and execution shall be on or before the expiration of this Participating Addendum. However, delivery of products or completion of services may be up to 120 days after the current Participating Addendum expiration date.
EXHIBIT 1
Participating Addendum 7-23-99-48-02
3. TERMS AND CONDITIONS/INCORPORATION OF DOCUMENTS
A. Terms and conditions listed below are hereby incorporated by reference and made a part of this Participating Addendum as if attached herein and shall apply to the purchase of goods or services made under this Participating Addendum. 1) General Provisions (GSPD401Non-IT Commodities) effective 6/21/2022 B. Terms can be viewed on the DGS Procurement Division website (https://www.dgs.ca.gov/PD/Resources/Page-Content/Procurement-Division- Resources-List-Folder/Required-Language-for-Solicitations-and-Contracts).
4. ORDER OF PRECEDENCE
A. In the event of any inconsistency between the articles, attachments, or provisions which constitute this agreement, the following descending order of precedence shall apply:
1) California Participating Addendum Number 7-23-99-48-02 2) Louisiana NASPO ValuePoint Master Agreement Number CW7254
5. AVAILABLE PRODUCTS AND SERVICES
A. The following product and service offerings from the Louisiana NASPO ValuePoint Master Agreement Number CW7254 are allowed under this Participating Addendum:
1) Vehicle Lifts
2) Garage Associated Equipment
6. RESTRICTIONS/DISALLOWED PRODUCTS AND SERVICES (STATE
AGENCIES ONLY)
A. The following restrictions apply to state agency purchases under this Participating Addendum.
1) Equipment Leasing and Rental
a. State agencies must use Golden State Financial Marketplace ( GS $Mart) or Lease $Mart for equipment leasing and rental.
B. Product and service categories that are available on mandatory California statewide contracts cannot be purchased from this Participating Addendum by state agencies without an exemption. State agencies are responsible for obtaining a mandatory statewide contract exemption from DGS prior to issuing a purchase order.
C. Services that fall within the definition of “public works” as defined in Public Contract Code section 1101 and Labor Code section 1720 are disallowed under EXHIBIT 1
Participating Addendum 7-23-99-48-02
this Participating Addendum and must be procured by alternate means. This restriction is not applicable to local governments.
7. PRICING
A. Contractor’s approved NASPO ValuePoint Price List identifies product and services pricing.
B. Pricing shall not be adjusted to include State administration fees.
C. Contractor is responsible for providing the State Contract Administrator any revisions to Contractor’s NASPO ValuePoint Price List approved by the lead state in writing.
D. Contractor shall not add new categories or groups of equipment or services under this Participating Addendum that were not originally included in the NASPO ValuePoint Master Agreement unless approved by the lead state of Louisiana.
E. Approved NASPO ValuePoint Price List will be posted on the NASPO ValuePoint website.
8. AUTHORIZED RESELLERS
Authorized Resellers will not be used for this Participating Addendum.
9. SUBCONTRACTORS
A. Nothing contained in this Participating Addendum or otherwise, shall create any contractual relation between the State and any subcontractors, and no subcontract shall relieve Contractor of its responsibilities and obligations hereunder. Contractor agrees to be as fully responsible to the State for the acts and omissions of its subcontractors and of persons either directly or indirectly employed by any of them as it is for the acts and omissions of persons directly employed by the Contractor. Contractor's obligation to pay its subcontractors is an independent obligation from the State's obligation to make payments to the Contractor.
B. Contractor shall perform the work contemplated with resources available within its own organization and no portion of the work shall be subcontracted except for subcontractors listed on the Bidder Declaration (GSPD-05-105) provided to ordering agencies at the time an order is quoted.
C. As the prime Contractor, Contractor is responsible for reports and fees required by the terms and conditions of the NASPO ValuePoint Master Agreement and Participating Addendum.
EXHIBIT 1
Participating Addendum 7-23-99-48-02
D. Any subcontract in excess of $25,000, entered into as a result of this Participating Addendum, shall contain all the provisions stipulated in this Participating Addendum to be applicable to subcontractors.
10.ORDERING AGENCY RESPONSIBILITIES
A. State agency and local government use of this Participating Addendum is optional.
B. State agencies and local governments must follow the ordering procedures outlined within the User Instructions guide, administered by the State Contract Administrator, to execute orders against this Participating Addendum. User Instructions are posted on the State’s Cal eProcure website.
C. All purchase orders executed under this Participating Addendum shall include the Participating Addendum Number 7-23-99-48-02.
11. STATE AGENCY BUY RECYCLED CAMPAIGN (SABRC)
A. State agencies are required to report purchases made within the eleven product categories in the California Department of Resources Recycling and Recovery’s State Agency Buy Recycled Campaign (SABRC) per Public Contract Code sections 12200-12217.
B. Contractor will be required to complete and return a Postconsumer Recycled- Content Certification form
(https://calrecycle.ca.gov/buyrecycled/stateagency/vendored/form74guide/) upon request by the state agency.
12.DELIVERY
A. Delivery shall occur within 120 days after receipt of order, or as negotiated between ordering agency and Contractor and included in the purchase order, or as otherwise stipulated in the NASPO ValuePoint Master Agreement.
B. Deliveries within the contiguous United States will be Free On Board (F.O.B.) Destination, freight prepaid, with all transportation and handling charges paid by the Contractor to the ordering agency’s receiving point. All deliveries to Alaska, Hawaii, US territories, or other offshore agencies shall be F.O.B., freight pre-paid to the nearest port of embarkation.
13. INVOICING AND PAYMENT
A. Payment will be made in accordance with Non-IT Commodities General Provisions Paragraph 30 (Required Payment Date).
B. Invoices shall be sent to the address identified in the ordering agency’s purchase order. The Participating Addendum Number and ordering agency purchase order EXHIBIT 1
Participating Addendum 7-23-99-48-02
number shall appear on each invoice for all purchases placed under this Participating Addendum.
C. Contractor will accept the State of California credit card (CAL-Card) for payment of invoices.
14. USAGE REPORTING
A. Contractor shall submit usage reports on a quarterly basis to the State Contract Administrator for all California entity purchases using the report template attached hereto as Attachment A. The report is due even when there is no activity.
B. The State Contract Administrator reserves the right to modify Attachment A and require Contractor to provide additional order information during the course of this Participating Addendum.
C. The report shall be an Excel spreadsheet transmitted electronically to the DGS Cooperatives mailbox ([email protected]).
D. Any report that does not follow the required format or that excludes information will be deemed incomplete. Contractor will be responsible for submitting corrected reports within five (5) business days of the date of written notification from the State.
E. Tax must not be included in the report, even if it is on the purchase order.
F. Reports are due for each quarter as follows:
Reporting Period Due Date
January 1 to March 31 April 30
April 1 to June 30 July 31
July 1 to September 30 October 31
October 1 to December 31 January 31
G. Failure to meet reporting requirements and submit the reports on a timely basis shall constitute grounds for suspension of this Participating Addendum.
H. Time extensions may be approved only if all due reports have been submitted to the State.
15. ADMINISTRATIVE FEE
A. Contractor is required to remit to DGS an administrative fee amount equal to
1.25% of the sales for the quarterly reporting period less freight, taxes, returned products and credits. (For example, if the net sales for the reporting quarter totals $100,000.00, the incentive fee due to DGS would be $1,250.00.) EXHIBIT 1
Participating Addendum 7-23-99-48-02
B. The administrative fee shall not be included as an adjustment to Contractor’s NASPO ValuePoint Master Agreement pricing.
C. The administrative fee shall not be invoiced or charged to the ordering agency.
D. Payment of the administrative fee is due irrespective of payment status from ordering agencies.
E. Payment may be made in the form of an electronic payment using the LPA Payment Portal website (https://www.dgs.ca.gov/PD/Services/Page- Content/Procurement-Division-Services-List-Folder/Access-LPA-Payment-Portal) or by submitting a check payable to the State of California, Department of General Services.
F. Administrative fee payments made by check must include the Participating Addendum Number on the check and be submitted to the following address:
Department of General Services
Procurement Division
Attn: MAPS Payment Processing
707 Third Street, 2nd Floor
West Sacramento, CA 95605
G. Administrative fee payments are due for each quarter as follows:
Reporting Period Due Date
January 1 to March 31 April 30
April 1 to June 30 July 31
July 1 to September 30 October 31
October 1 to December 31 January 31
H. Failure to meet administrative fee requirements and submit fees on a timely basis shall constitute grounds for suspension of this Participating Addendum.
16.CONTRACT MANAGEMENT
A. The primary Contractor Contract Manager for this Participating Addendum shall be as follows:
Contractor Contract Manager
Name: Kathy Brown
Phone: (812) 269-7316
Fax: N/A
Email: [email protected]
EXHIBIT 1
Participating Addendum 7-23-99-48-02
Contractor Contract Manager
Address: Vehicle Service Group, LLC
Attn: Kathy Brown
2700 Lanier Drive
Madison, IN 47250
B. The State Contract Administrator for this Participating Addendum shall be as follows:
State Contract Administrator
Name: Maureen Seiferling
Phone: (279) 946-8226
Email: [email protected]
Address: State of California
Department of General Services
Procurement Division
707 Third Street, 2nd Floor, MS 2-202
West Sacramento, CA 95605
C. Should the contact information for either party change, the party will provide written notice with updated information no later than ten (10) business days after the change.
17. TERMINATION OF AGREEMENT
The State may terminate this Participating Addendum at any time upon 30 days prior written notice to the Contractor. Upon termination or other expiration of this Participating Addendum, each party will assist the other party in orderly termination of the Participating Addendum and the transfer of all assets, tangible, and intangible, as may facilitate the orderly, non-disrupted business continuation of each party. This provision shall not relieve the Contractor of the obligation to perform under any purchase order or other similar ordering document executed prior to the termination becoming effective.
18.AMENDMENT
No amendment or variation of the terms of this Participating Addendum shall be valid unless made in writing, signed by the parties, and approved as required. No oral understanding or agreement not incorporated in the Participating Addendum is binding on any of the parties.
EXHIBIT 1
Participating Addendum 7-23-99-48-02
19. NEWS RELEASES
Unless otherwise exempted, news releases, endorsements, advertising, and social media content pertaining to this Participating Addendum shall not be made without prior written approval from the State.
20. EXECUTIVE ORDER N-6-22 – RUSSIA SANCTIONS
On March 4, 2022, Governor Gavin Newsom issued Executive Order N-6-22 (the EO) regarding Economic Sanctions against Russia and Russian entities and individuals. “Economic Sanctions” refers to sanctions imposed by the U.S. government in response to Russia’s actions in Ukraine, as well as any sanctions imposed under state law. The EO directs state agencies to terminate contracts with, and to refrain from entering any new contracts with, individuals or entities that are determined to be a target of Economic Sanctions. Accordingly, should the State determine Contractor is a target of Economic Sanctions or is conducting prohibited transactions with sanctioned individuals or entities, that shall be grounds for termination of this Participating Addendum. The State shall provide Contractor advance written notice of such termination, allowing Contractor at least thirty (30) calendar days to provide a written response. Termination shall be at the sole discretion of the State.
21. AGREEMENT
A. This Participating Addendum and the Master Agreement together with its exhibits and/or amendments, set forth the entire agreement between the parties with respect to the subject matter of all previous communications, representations, or agreements, whether oral or written, with respect to the subject matter hereof. Terms and conditions inconsistent with, contrary or in addition to the terms and conditions of this Participating Addendum and the Master Agreement, together with its exhibits and/or amendments, shall not be added to or incorporated into this Participating Addendum or the Master Agreement and its exhibits and/or amendments, by any subsequent purchase order or otherwise, and any such attempts to add or incorporate such terms and conditions are hereby rejected. The terms and conditions of this Participating Addendum and the Master Agreement and its exhibits and/or amendments shall prevail and govern in the case of any such inconsistent or additional terms.
B. By signing this Participating Addendum, Contractor agrees to offer the same products/services available on the Louisiana NASPO ValuePoint Master Agreement Number CW7254, at prices equal to or lower than the prices on that agreement.
EXHIBIT 1
Participating Addendum 7-23-99-48-02
IN WITNESS WHEREOF, the parties have executed this Participating Addendum as of the date of execution by both parties below.
STATE OF CALIFORNIA
Department of General Services
CONTRACTOR
Vehicle Service Group, LLC
Agency Name Contractor Name
Authorized Signature Date Signed Authorized Signature Date Signed Julie Matthews, MAU2 Supervisor Tim Vaughan, Vice-President, Sales Printed Name/Title of Person Signing Printed Name/Title of Person Signing 707 Third Street
West Sacramento, CA 95605
2700 Lanier Drive
Madison, IN 47250
Address Address
EXHIBIT 1
Participating Addendum 7-23-99-48-02
Attachment A
EXHIBIT 1
Participating Addendum 7-23-99-48-02
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
Master Agreement Number CW7254
Solicitation Number Doc554414018
Be
it known, the State of Louisiana (hereinafter sometimes referred to as "Lead State") and Vehicle Service Group, LLC., 2700 Lanier Dr, Madison, IN 47250 (hereinafter sometimes referred to as "Contractor") do hereby enter into this Master Agreement under the following terms and conditions.
I. Definitions
1.1 Acceptance means acceptance of goods and services as set forth in Section IX of this Master Agreement.
1.2 Contractor means a party to this Master Agreement, whether a person or entity, that delivers goods or performs services under the terms set forth in this Master Agreement.
1.3 Embedded Software means one (1) or more software applications which permanently reside on a computing device.
1.4 Intellectual Property means any and all patents, copyrights, service marks, trademarks, trade secrets, trade names, patentable inventions, or other similar proprietary rights, in tangible or intangible form, and all rights, title, and interest therein.
1.5 Lead State means the State centrally administering any resulting Master Agreement(s) who is a party to this Master Agreement.
1.6 Master Agreement means the underlying agreement executed by and between the Lead State, acting in cooperation with NASPO ValuePoint, and the Contractor, as now or hereafter amended.
1.7 NASPO ValuePoint is a division of the National Association of State Procurement Officials (“NASPO”), a 501(c)(3) corporation. NASPO ValuePoint facilitates administration of the NASPO cooperative group contracting consortium of state chief procurement officials for the benefit of state departments, institutions, agencies, and political subdivisions and other eligible entities (i.e., colleges, school districts, counties, cities, some nonprofit organizations, etc.) for all states, the District of Columbia, and territories of the United States. NASPO ValuePoint is identified in the Master Agreement as the recipient of reports and may perform contract administration functions relating to collecting and receiving reports, as well as other contract administration functions as assigned by the Lead State.
1.8 Order or Purchase Order means any purchase order, sales order, contract or other document used by a Purchasing Entity to order the Products.
1.9 Participating Addendum means a bilateral agreement executed by a Contractor and a Participating Entity incorporating this Master Agreement and any additional Participating Entity - specific language or other requirements (e.g., ordering procedures specific to the Participating Entity, entity-specific terms and conditions, etc.).
1.10 Participating Entity means a state (as well as the District of Columbia and US territories), city, county, district, other political subdivision of a State, or a nonprofit organization under the laws of some states properly authorized to enter into a Participating Addendum, that has executed a Participating Addendum.
1.11 Participating State means a state that has executed a Participating Addendum or has indicated an intent to execute a Participating Addendum.
1.12 Product or Products and Services means any equipment, software (including embedded software), documentation, service, or other deliverable supplied or created by the Contractor pursuant to this Master Agreement. The term Product includes goods and services.
1.13 Purchasing Entity means a state (as well as the District of Columbia and US territories), city, county, district, other political subdivision of a State, or a nonprofit organization under the laws of some states if authorized by a Participating Addendum, that issues a Purchase Order against the Master Agreement and becomes financially committed to the purchase.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
II. Term of Master Agreement
2.1 Term. This Master Agreement is effective upon execution by the Lead State and will end on March 31, 2028 unless terminated sooner.
2.2 Amendment Limitations. The terms of this Master Agreement will not be waived, altered, modified, supplemented, or amended in any manner whatsoever without prior written agreement of the Lead State and Contractor.
2.3 Amendment Term. The term of the Master Agreement may be amended past the initial term and stated renewal periods for a reasonable period if in the judgment of the Lead State a follow- on competitive procurement will be unavoidably delayed (despite good faith efforts) beyond the planned date of execution of the follow-on master agreement. This subsection will not be deemed to limit the authority of a Lead State under its state law to otherwise negotiate contract extensions.
III. Attachments
3.1 This Master Agreement includes the following documents:
3.1.1 Attachment A: Scope of Work
3.1.2 Attachment B: Master Agreement Pricing
3.1.3 The RFP Solicitation and addenda, incorporated by reference but not attached
3.1.4 Contractor’s Proposal, incorporated by reference but not attached.
IV. Order of Precedence
4.1 Order. Any Order placed under this Master Agreement will consist of the following documents:
4.1.1 A Participating Entity’s Participating Addendum (“PA”);
4.1.2 NASPO ValuePoint Master Agreement, including all attachments thereto;
4.1.3 A Purchase Order or Scope of Work/Specifications issued against the Master Agreement;
4.1.4 The Solicitation or, if separately executed after award, the Lead State’s bilateral agreement that integrates applicable provisions;
4.1.5 Contractor’s response to the Solicitation, as revised (if permitted) and accepted by the Lead State.
4.2 Conflict. These documents will be read to be consistent and complementary. Any conflict among these documents will be resolved by giving priority to these documents in the order listed above.
Contractor terms and conditions that apply to this Master Agreement are only those that are expressly accepted by the Lead State and must be in writing and attached to this Master Agreement as an Exhibit or Attachment.
4.3 Participating Addenda. Participating Addenda will not be construed to diminish, modify, or otherwise derogate any provisions in this Master Agreement between the Lead State and Contractor. Participating Addenda will not include a term of agreement that exceeds the term of the Master Agreement.
V. Participation
5.1 Requirement for a Participating Addendum. Contractor may not deliver Products under this Master Agreement until a Participating Addendum acceptable to the Participating Entity and Contractor is executed.
5.2 Applicability of Master Agreement. NASPO ValuePoint Master Agreement Terms and Conditions are applicable to any Order by a Participating Entity (and other Purchasing Entities covered by their Participating Addendum), except to the extent altered, modified, supplemented or amended by a Participating Addendum, subject to Section III. For the purposes of illustration and not limitation, this authority may apply to unique delivery and invoicing requirements, EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
confidentiality requirements, defaults on Orders, governing law and venue relating to Orders by a Participating Entity, indemnification, and insurance requirements. Statutory or constitutional requirements relating to availability of funds may require specific language in some Participating Addenda in order to comply with applicable law. The expectation is that these alterations, modifications, supplements, or amendments will be addressed in the Participating Addendum or, with the consent of the Purchasing Entity and Contractor, may be included in the ordering document (e.g., purchase order or contract) used by the Purchasing Entity to place the Order.
5.3 Authorized Use. Use of specific NASPO ValuePoint Master Agreements by state agencies, political subdivisions and other Participating Entities is subject to applicable state law and the approval of the respective State Chief Procurement Official. Issues of interpretation and eligibility for participation are solely within the authority of the respective State Chief Procurement Official.
5.4 Obligated Entities. Obligations under this Master Agreement are limited to those Participating Entities who have signed a Participating Addendum and Purchasing Entities within the scope of those Participating Addenda. States or other entities permitted to participate may use an informal competitive process to determine which Master Agreements to participate in through execution of a Participating Addendum. Participating Entities incur no financial obligations on behalf of other Purchasing Entities.
5.5 Notice of Participating Addendum. Contractor shall email a fully executed PDF copy of each Participating Addendum to [email protected]
to support documentation of participation
and posting in appropriate databases.
5.6 Eligibility for a Participating Addendum. Eligible entities who are not states may under some circumstances sign their own Participating Addendum, subject to the consent of the Chief Procurement Official of the state where the entity is located. Coordinate requests for such participation through NASPO ValuePoint. Any permission to participate through execution of a Participating Addendum is not a determination that procurement authority exists; the entity must ensure that they have the requisite procurement authority to execute a Participating Addendum.
5.7 Prohibition on Resale. Subject to any specific conditions included in the solicitation or Contractor’s proposal as accepted by the Lead State, or as explicitly permitted in a Participating Addendum, Purchasing Entities may not resell Products purchased under this Master Agreement.
Absent any such condition or explicit permission, this limitation does not prohibit: payments by employees of a Purchasing Entity for Products; sales of Products to the general public as surplus property; and fees associated with inventory transactions with other governmental or nonprofit entities and consistent with a Purchasing Entity’s laws and regulations. Any sale or transfer permitted by this subsection must be consistent with license rights granted for use of intellectual property.
5.8 Individual Customers. Except as may otherwise be agreed to by the Purchasing Entity and Contractor, each Purchasing Entity shall follow the terms and conditions of the Master Agreement and applicable Participating Addendum and will have the same rights and responsibilities for their purchases as the Lead State has in the Master Agreement and as the Participating Entity has in the Participating Addendum, including but not limited to any indemnity or right to recover any costs as such right is defined in the Master Agreement and applicable Participating Addendum for their purchases. Each Purchasing Entity will be responsible for its own charges, fees, and liabilities. The Contractor will apply the charges and invoice each Purchasing Entity individually.
5.9 Release of Information. Throughout the duration of this Master Agreement, Contractor must secure from the Lead State prior approval for the release of information that pertains to the potential work or activities covered by the Master Agreement. This limitation does not preclude publication about the award of the Master Agreement or marketing activities consistent with any proposed and accepted marketing plan.
5.10 No Representations. The Contractor shall not make any representations of NASPO ValuePoint, the Lead State, any Participating Entity, or any Purchasing Entity’s opinion or position as to the quality or effectiveness of the services that are the subject of this Master Agreement without prior written consent.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
VI. NASPO ValuePoint Provisions
6.1 Applicability. NASPO ValuePoint is not a party to the Master Agreement. The terms set forth in Section V are for the benefit of NASPO ValuePoint as a third-party beneficiary of this Master Agreement.
6.2 Administrative Fees
6.2.1 NASPO ValuePoint Fee. Contractor shall pay to NASPO ValuePoint, or its assignee, a NASPO ValuePoint Administrative Fee of one-quarter of one percent (0.25% or 0.0025) no later than 60 days following the end of each calendar quarter. The NASPO ValuePoint Administrative Fee must be submitted quarterly and is based on all sales of products and services under the Master Agreement (less any charges for taxes or shipping). The NASPO ValuePoint Administrative Fee is not negotiable. This fee is to be included as part of the pricing submitted with a vendor’s response to the Lead State’s solicitation.
6.2.2 State Imposed Fees. Some states may require an additional fee be paid by Contractor directly to the state on purchases made by Purchasing Entities within that state. For all such requests, the fee rate or amount, payment method, and schedule for such reports and payments will be incorporated into the applicable Participating Addendum. Unless otherwise negotiated by the Participating Entity, Contractor may adjust the Master Agreement pricing incorporated into the Participating Entity’s Participating Addendum by an amount not to exceed the Participating Entity’s fee. Such adjustments will have no effect on the NASPO ValuePoint administrative fee, pricing in the Master Agreement, or pricing offered to Purchasing Entities outside the jurisdiction of the Participating Entity.
6.3 NASPO ValuePoint Summary and Detailed Usage Reports
6.3.1 Sales Data Reporting. In accordance with this section, Contractor shall report to NASPO ValuePoint all Orders under this Master Agreement for which Contractor has invoiced the ordering entity or individual, including Orders invoiced to Participating Entity or Purchasing Entity employees for personal use if such use is permitted by this Master Agreement and the applicable Participating Addendum (“Sales Data”). Timely and complete reporting of Sales Data is a material requirement of this Master Agreement.
Reporting requirements, including those related to the format, contents, frequency, or delivery of reports, may be updated by NASPO ValuePoint with reasonable notice to Contractor and without amendment to this Master Agreement. NASPO ValuePoint shall have exclusive ownership of any media on which reports are submitted and shall have a perpetual, irrevocable, non-exclusive, royalty free, and transferable right to display, modify, copy, and otherwise use reports, data, and information provided under this section.
6.3.2 Summary Sales Data. “Summary Sales Data” is Sales Data reported as cumulative totals by state. Contractor shall, using the reporting tool or template provided by NASPO ValuePoint, report Summary Sales Data to NASPO ValuePoint for each calendar quarter no later than thirty (30) days following the end of the quarter. If Contractor has no reportable Sales Data for the quarter, Contractor shall submit a zero-sales report.
6.3.3 Detailed Sales Data. “Detailed Sales Data” is Sales Data that includes for each Order all information required by the Solicitation or by NASPO ValuePoint, including customer information, Order information, and line-item details. Contractor shall, using the reporting tool or template provided by NASPO ValuePoint, report Detailed Sales Data to NASPO ValuePoint for each calendar quarter no later than thirty (30) days following the end of the quarter. Detailed Sales Data shall be reported in the format provided in the Solicitation or provided by NASPO ValuePoint. The total sales volume of reported Detailed Sales Data shall be consistent with the total sales volume of reported Summary Sales Data.
6.3.4 Sales Data Crosswalks. Upon request by NASPO ValuePoint, Contractor shall provide to NASPO ValuePoint tables of customer and Product information and specific attributes thereof for the purpose of standardizing and analyzing reported Sales Data (“Crosswalks”). Customer Crosswalks must include a list of existing and potential EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
Purchasing Entities and identify for each the appropriate customer type as defined by NASPO ValuePoint. Product Crosswalks must include Contractor’s part number or SKU for each Product in Offeror’s catalog and identify for each the appropriate Master Agreement category (and subcategory, if applicable), manufacturer part number, product description, eight-digit UNSPSC Class Level commodity code, and (if applicable) EPEAT value and Energy Star rating. Crosswalk requirements and fields may be updated by NASPO ValuePoint with reasonable notice to Contractor and without amendment to this Master Agreement. Contractor shall work in good faith with NASPO ValuePoint to keep Crosswalks updated as Contractor’s customer lists and product catalog change.
6.3.5 Executive Summary. Contractor shall, upon request by NASPO ValuePoint, provide NASPO ValuePoint with an executive summary that includes but is not limited to a list of states with an active Participating Addendum, states with which Contractor is in negotiations, and any Participating Addendum roll-out or implementation activities and issues. NASPO ValuePoint and Contractor will determine the format and content of the executive summary.
6.4 NASPO ValuePoint Cooperative Program Marketing, Training, and Performance Review
6.4.1 Staff Education. Contractor shall work cooperatively with NASPO ValuePoint personnel.
Contractor shall present plans to NASPO ValuePoint for the education of Contractor’s contract administrator(s) and sales/marketing workforce regarding the Master Agreement contract, including the competitive nature of NASPO ValuePoint procurements, the master agreement and participating addendum process, and the manner in which eligible entities can participate in the Master Agreement.
6.4.2 Onboarding Plan. Upon request by NASPO ValuePoint, Contractor shall, as Participating Addendums are executed, provide plans to launch the program for the Participating Entity. Plans will include time frames to launch the agreement and confirmation that the Contractor’s website has been updated to properly reflect the scope and terms of the Master Agreement as available to the Participating Entity and eligible Purchasing Entities.
6.4.3 Annual Contract Performance Review. Contractor shall participate in an annual contract performance review with the Lead State and NASPO ValuePoint, which may at the discretion of the Lead State be held in person and which may include a discussion of marketing action plans, target strategies, marketing materials, Contractor reporting, and timeliness of payment of administration fees.
6.4.4 Use of NASPO ValuePoint Logo. The NASPO ValuePoint logos may not be used by Contractor in sales and marketing until a separate logo use agreement is executed with NASPO ValuePoint.
6.4.5 Most Favored Customer. Contractor shall, within thirty (30) days of their effective date, notify the Lead State and NASPO ValuePoint of any contractual most-favored-customer provisions in third-party contracts or agreements that may affect the promotion of this Master Agreement or whose terms provide for adjustments to future rates or pricing based on rates, pricing in, or Orders from this Master Agreement. Upon request of the Lead State or NASPO ValuePoint, Contractor shall provide a copy of any such provisions.
6.5 Cancellation. In consultation with NASPO ValuePoint, the Lead State may, in its discretion, cancel the Master Agreement or not exercise an option to renew, when utilization of Contractor’s Master Agreement does not warrant further administration of the Master Agreement. The Lead State may also exercise its right to not renew the Master Agreement if vendor fails to record or report revenue for three (3) consecutive quarters, upon 60-calendar day written notice to the Contractor. Cancellation based on nonuse or under-utilization will not occur sooner than two (2) years after execution of the Master Agreement. This subsection does not limit the discretionary right of either the Lead State or Contractor to cancel the Master Agreement or terminate for default subject to the terms herein. This subsection also does not limit any right of the Lead State to cancel the Master Agreement under applicable laws.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
6.6 Canadian Participation. Subject to the approval of Contractor, any Canadian provincial government or provincially funded entity in Alberta, British Columbia, Manitoba, New Brunswick, Newfoundland and Labrador, Nova Scotia, Ontario, Prince Edward Island, Quebec, or Saskatchewan, and territorial government or territorial government funded entity in the Northwest Territories, Nunavut, or Yukon, including municipalities, universities, community colleges, school boards, health authorities, housing authorities, agencies, boards, commissions, and crown corporations, may be eligible to use Contractor's Master Agreement.
6.7 Additional Agreement with NASPO. Upon request by NASPO ValuePoint, awarded Contractor shall enter into a direct contractual relationship with NASPO ValuePoint related to Contractor’s obligations to NASPO ValuePoint under the terms of the Master Agreement, the terms of which shall be the same or similar (and not less favorable) than the terms set forth in the Master Agreement.
VII. Pricing, Payment & Leasing
7.1 Pricing. The prices contained in this Master Agreement or offered under this Master Agreement represent the not-to-exceed price to any Purchasing Entity.
7.1.1 Contractor may periodically update Contractor’s product and service catalog without amendment to this Master Agreement, provided the catalog is accessible to the Lead State, Participating Entities, and Purchasing Entities on Contractor’s website or the NASPO ValuePoint website. All discounts must be guaranteed and maintained for the entire term of this Master Agreement, and all products and services offered must comply with the requirements herein. All pricing is subject to an independent review for reasonableness and best value by the Lead State. Pricing for any product or service that is determined by the Lead State to be unreasonable, including any cost to which Contractor’s discount is being applied, may result in removal of the product or service from this Master Agreement.
7.2 Payment. Unless otherwise agreed upon in a Participating Addendum or Order, Payment aft er Acceptance will be made within thirty (30) days following the date the entire order is delivered or the date a correct invoice is received, whichever is later. After 45 days the Contractor may assess overdue account charges up to a maximum rate of one percent (1%) per month on the outstanding balance, unless a different late payment amount is specified in a Participating Addendum or Order, or otherwise prescribed by applicable law. Payments will be remitted in the manner specified in the Participating Addendum or Order. Payments may be made via a purchasing card with no additional charge.
7.3 Prohibition Against Advance Payment. Unless otherwise agreed upon in a Participating Addendum or Order, no compensation or payment of any nature shall be made in advance of services actually performed or products actually delivered.
7.4 Leasing or Alternative Financing Methods. The procurement and other applicable laws of some Purchasing Entities may permit the use of leasing or alternative financing methods for the acquisition of Products under this Master Agreement. Where the terms and conditions are not otherwise prescribed in an applicable Participating Addendum, the terms and conditions for leasing or alternative financing methods are subject to negotiation between the Contractor and Purchasing Entity.
VIII. Ordering
8.1 Order Numbers. Master Agreement order and purchase order numbers must be clearly shown on all acknowledgments, packing slips, invoices, and on all correspondence.
8.2 Quotes. Purchasing Entities may define entity-specific or project-specific requirements and informally compete the requirement among companies having a Master Agreement on an “as needed” basis. This procedure may also be used when requirements are aggregated or other firm commitments may be made to achieve reductions in pricing. This procedure may be modified in Participating Addenda and adapted to the Purchasing Entity’s rules and policies. The Purchasing Entity may in its sole discretion determine which Master Agreement Contractors should be EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
solicited for a quote. The Purchasing Entity may select the quote that it considers most advantageous, cost, and other factors considered.
8.3 Applicable Rules. Each Purchasing Entity will identify and utilize its own appropriate purchasing procedure and documentation. Contractor is expected to become familiar with the Purchasing Entities’ rules, policies, and procedures regarding the ordering of supplies and/or services contemplated by this Master Agreement.
8.4 Required Documentation. Contractor shall not begin work without a valid Purchase Order or other appropriate commitment document under the law of the Purchasing Entity.
8.5 Term of Purchase. Orders may be placed consistent with the terms of this Master Agreement and applicable Participating Addendum during the term of the Master Agreement and Participating Addendum.
8.5.1 Orders must be placed pursuant to this Master Agreement prior to the termination date thereof, but may have a delivery date or performance period up to 120 days past the then-current termination date of this Master Agreement.
8.5.2 Notwithstanding the previous, Orders must also comply with the terms of the applicable Participating Addendum, which may further restrict the period during which Orders may be placed or delivered.
8.5.3 Financial obligations of Purchasing Entities payable after the current applicable fiscal year are contingent upon agency funds for that purpose being appropriated, budgeted, and otherwise made available.
8.5.4 Notwithstanding the expiration, cancellation or termination of this Master Agreement, Contractor shall perform in accordance with the terms of any Orders then outstanding at the time of such expiration or termination. Contractor shall not honor any Orders placed after the expiration, cancellation, or termination of this Master Agreement, or in any manner inconsistent with this Master Agreement’s terms.
8.5.5 Orders for any separate indefinite quantity, task order, or other form of indefinite delivery order arrangement priced against this Master Agreement may not be placed after the expiration or termination of this Master Agreement, notwithstanding the term of any such indefinite delivery order agreement.
8.6 Order Form Requirements. All Orders pursuant to this Master Agreement, at a minimum, must include:
8.6.1 The services or supplies being delivered;
8.6.2 A shipping address and other delivery requirements, if any;
8.6.3 A billing address;
8.6.4 Purchasing Entity contact information;
8.6.5 Pricing consistent with this Master Agreement and applicable Participating Addendum and as may be adjusted by agreement of the Purchasing Entity and Contractor;
8.6.6 A not-to-exceed total for the products or services being ordered; and
8.6.7 The Master Agreement number or the applicable Participating Addendum number, provided the Participating Addendum references the Master Agreement number .
8.7 Communication. All communications concerning administration of Orders placed must be furnished solely to the authorized purchasing agent within the Purchasing Entity’s purchasing office, or to such other individual identified in writing in the Order.
8.8 Contract Provisions for Orders Utilizing Federal Funds. Pursuant to Appendix II to 2 Code of Federal Regulations (CFR) Part 200, Contract Provisions for Non-Federal Entity Contracts Under Federal Awards, Orders funded with federal funds may have additional contractual requirements or certifications that must be satisfied at the time the Order is placed or upon delivery. These EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
federal requirements may be proposed by Participating Entities in Participating Addenda and Purchasing Entities for incorporation in Orders placed under this Master Agreement.
IX. Shipping and Delivery
9.1 Shipping Terms. All deliveries within the contiguous United States will be F.O.B. destination, freight pre-paid, with all transportation and handling charges paid by the Contractor. All deliveries to Alaska, Hawaii, US territories, or other offshore Purchasing Entities shall be FOB, freight pre- paid to the nearest port of embarkation. An estimate of shipping charges must be provided to the Purchasing Entity prior to shipment.
9.1.1 Notwithstanding the above, responsibility and liability for loss or damage will remain the Contractor’s until final inspection and acceptance when responsibility will pass to the Purchasing Entity except as to latent defects, fraud, and Contractor’s warranty obligations.
9.2 Minimum Shipping. The minimum shipment amount, if any, must be contained in the Master Agreement. Any order for less than the specified amount is to be shipped with the freight prepaid and added as a separate item on the invoice. Any portion of an Order to be shipped without transportation charges that is back ordered will be shipped without charge.
9.3 Inside Deliveries. To the extent applicable, all deliveries will be “Inside Deliveries” as designated by a representative of the Purchasing Entity placing the Order. Inside Delivery refers to a delivery to a location other than a loading dock, front lobby, or reception area. Specific delivery instructions will be noted on the order form or Purchase Order. Costs to repair any damage to the building interior (e.g., scratched walls, damage to the freight elevator, etc.) caused by Contractor or Contractor’s carrier will be the responsibility of the Contractor. Immediately upon becoming aware of such damage, Contractor shall notify the Purchasing Entity placing the Order.
9.4 Packaging. All products must be delivered in the manufacturer’s standard package. Costs must include all packing and/or crating charges. Cases must be of durable construction, in good condition, properly labeled and suitable in every respect for storage and handling of contents.
Each shipping carton must be marked with the commodity, brand, quantity, item code number and the Purchasing Entity’s Purchase Order number.
X. Inspection and Acceptance
10.1 Laws and Regulations. Any and all Products offered and furnished must comply fully with all applicable Federal, State, and local laws and regulations.
10.2 Applicability. Unless otherwise specified in the Master Agreement, Participating Addendum, or ordering document, the terms of this Section IX will apply. This section is not intended to limit rights and remedies under the applicable commercial code.
10.3 Inspection. All Products are subject to inspection at reasonable times and places before Acceptance. Contractor shall provide right of access to the Lead State, or to any other authorized agent or official of the Lead State or other Participating or Purchasing Entity, at reasonable times, to monitor and evaluate performance, compliance, and/or quality assurance requirements under this Master Agreement.
10.3.1 Products that do not meet specifications may be rejected. Failure to reject upon receipt, however, does not relieve the contractor of liability for material (nonconformity that substantial impairs value) latent or hidden defects subsequently revealed when goods are put to use.
10.3.2 Acceptance of such goods may be revoked in accordance with the provisions of the applicable commercial code, and the Contractor is liable for any resulting expense incurred by the Purchasing Entity related to the preparation and shipping of Product rejected and returned, or for which Acceptance is revoked.
10.4 Failure to Conform. If any services do not conform to contract requirements, the Purchasing Entity may require the Contractor to perform the services again in conformity with contract EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
requirements, at no increase in Order amount. When defects cannot be corrected by re- performance, the Purchasing Entity may require the Contractor to take necessary action to ensure that future performance conforms to contract requirements and reduce the contract price to reflect the reduced value of services performed.
10.5 Acceptance Testing. Purchasing Entity may establish a process, in keeping with industry standards, to ascertain whether the Product meets the standard of performance or specifications prior to Acceptance by the Purchasing Entity.
10.5.1 The Acceptance Testing period will be thirty (30) calendar days, unless otherwise specified, starting from the day after the Product is delivered or, if installed by Contractor, the day after the Product is installed and Contractor certifies that the Product is ready for Acceptance Testing.
10.5.2 If the Product does not meet the standard of performance or specifications during the initial period of Acceptance Testing, Purchasing Entity may, at its discretion, continue Acceptance Testing on a day-to-day basis until the standard of performance is met.
10.5.3 Upon rejection, the Contractor will have fifteen (15) calendar days to cure. If after the cure period, the Product still has not met the standard of performance or specifications, the Purchasing Entity may, at its option: (a) declare Contractor to be in breach and terminate the Order; (b) demand replacement Product from Contractor at no additional cost to Purchasing Entity; or, (c) continue the cure period for an additional time per iod agreed upon by the Purchasing Entity and the Contractor.
10.5.4 Contractor shall pay all costs related to the preparation and shipping of Product returned pursuant to the section.
10.5.5 No Product will be deemed Accepted and no charges will be paid until the standard of performance or specification is met.
XI. Warranty
11.1 Applicability. Unless otherwise specified in the Master Agreement, Participating Addendum, or ordering document, the terms of this Section X will apply.
11.2 Warranty. For a period of time as specified in the Proposal, the Contractor warrants that: (a) the Product performs according to all specific claims that the Contractor made in its response to the solicitation, (b) the Product is suitable for the ordinary purposes for which such Product is used, (c) the Product is suitable for any special purposes identified in the solicitation or for which the Purchasing Entity has relied on the Contractor’s skill or judgment, (d) the Product is designed and manufactured in a commercially reasonable manner, and (e) the Product is free of defects.
11.3 Breach of Warranty. Upon breach of the warranty set forth above, the Contractor will repair or replace (at no charge to the Purchasing Entity) the Product whose nonconformance is discovered and made known to the Contractor. If the repaired and/or replaced Product proves to be inadequate, or fails of its essential purpose, the Contractor will refund the full amount of any payments that have been made.
11.4 Rights Reserved. The rights and remedies of the parties under this warranty are in addition to any other rights and remedies of the parties provided by law or equity, including, without limitation, actual damages, and, as applicable and awarded under the law, to a prevailing party, reasonable attorneys’ fees and costs.
11.5 Warranty Period Start Date. The warranty period will begin upon Acceptance, as set forth in Section IX.
XII. Product Title
12.1 Conveyance of Title. Upon Acceptance by the Purchasing Entity, Contractor shall convey to Purchasing Entity title to the Product free and clear of all liens, encumbrances, or other security interests.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
12.2 Embedded Software. Transfer of title to the Product must include an irrevocable and perpetual license to use any Embedded Software in the Product. If Purchasing Entity subsequently transfers title of the Product to another entity, Purchasing Entity shall have the right to transfer the license to use the Embedded Software with the transfer of Product title. A subsequent transfer of this software license will be at no additional cost or charge to either Purchasing Entity or Purchasing Entity’s transferee.
12.3 License of Pre-Existing Intellectual Property. Contractor grants to the Purchasing Entity a nonexclusive, perpetual, royalty-free, irrevocable, license to use, publish, translate, reproduce, transfer with any sale of tangible media or Product, perform, display, and dispose of the Intellectual Property, and its derivatives, used or delivered under this Master Agreement, but not created under it (“Pre-existing Intellectual Property”). The Contractor shall be responsible for ensuring that this license is consistent with any third-party rights in the Pre-existing Intellectual Property.
XIII. Indemnification
13.1 General Indemnification. The Contractor shall defend, indemnify and hold harmless NASPO, NASPO ValuePoint, the Lead State, Participating Entities, and Purchasing Entities, along with their officers and employees, from and against third-party claims, damages or causes of action including reasonable attorneys’ fees and related costs for any death, injury, or damage to tangible property arising from any act, error, or omission of the Contractor, its employees or subcontractors or volunteers, at any tier, relating to performance under this Master Agreement.
13.2 Intellectual Property Indemnification. The Contractor shall defend, indemnify and hold harmless NASPO, NASPO ValuePoint, the Lead State, Participating Entities, Purchasing Entities, along with their officers and employees ("Indemnified Party"), from and against claims, damages or causes of action including reasonable attorneys’ fees and related costs arising out of the claim that the Product or its use infringes Intellectual Property rights of another person or entity ("Intellectual Property Claim").
13.2.1 The Contractor’s obligations under this section will not extend to any combination of the Product with any other product, system or method, unless the Product, system or method is:
13.2.1.1 provided by the Contractor or the Contractor’s subsidiaries or affiliates;
13.2.1.2 specified by the Contractor to work with the Product;
13.2.1.3 reasonably required to use the Product in its intended manner, and the infringement could not have been avoided by substituting another reasonably available product, system or method capable of performing the same function; or
13.2.1.4 reasonably expected to be used in combination with the Product.
13.2.2 The Indemnified Party shall notify the Contractor within a reasonable time after receiving notice of an Intellectual Property Claim. Even if the Indemnified Party fails to provide reasonable notice, the Contractor shall not be relieved from its obligations unless the Contractor can demonstrate that it was prejudiced in defending the Intellectual Property Claim resulting in increased expenses or loss to the Contractor.
If the Contractor promptly and reasonably investigates and defends any Intellectual Property Claim, it shall have control over the defense and settlement of the Intellectual Property Claim. However, the Indemnified Party must consent in writing for any money damages or obligations for which it may be responsible.
13.2.3 The Indemnified Party shall furnish, at the Contractor’s reasonable request and expense, information and assistance necessary for such defense. If the Contractor fails to vigorously pursue the defense or settlement of the Intellectual Property Claim, the Indemnified Party may assume the defense or settlement of the Intellectual Property Claim and the Contractor shall be liable for all costs and expenses, EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
including reasonable attorneys’ fees and related costs, incurred by the Indemnified Party in the pursuit of the Intellectual Property Claim.
13.2.4 Unless otherwise set forth herein, Section 12.2 is not subject to any limitations of liability in this Master Agreement or in any other document executed in conjunction with this Master Agreement.
XIV. Insurance
14.1 Term. Contractor shall, during the term of this Master Agreement, maintain in full force and effect, the insurance described in this section. A Participating Entity may negotiate alternative Insurance requirements in their Participating Addendum.
14.2 Class. Contractor shall acquire such insurance from an insurance carrier or carriers licensed to conduct business in each Participating Entity’s state and having a rating of A-, Class VII or better, in the most recently published edition of A.M. Best’s Insurance Reports. Failure to buy and maintain the required insurance may result in this Master Agreement’s termination or, at a Participating Entity’s option, result in termination of its Participating Addendum.
14.3 Coverage. Coverage must be written on an occurrence basis. The minimum acceptable limits will be as indicated below:
14.3.1 Contractor shall maintain Commercial General Liability insurance covering premises operations, independent contractors, products and completed operations, blanket contractual liability, personal injury (including death), advertising liability, and property damage, with a limit of not less than $1 million per occurrence and $2 million general aggregate;
14.3.2 Contractor shall maintain Automobile Liability insurance with a minimum combined single limit per accident of not less than $1 million;
14.3.3 Contractor shall maintain Workers Compensation insurance in compliance with the Workers Compensation law of the state of the Contractor’s headquarters. Employers Liability is included with a minimum limit of $1 million per accident/per disease/per employee.
14.4 Notice of Cancellation. Contractor shall pay premiums on all insurance policies. Contractor shall provide notice to a Participating Entity who is a state within five (5) business days after Contractor is first aware of expiration, cancellation or nonrenewal of such policy or is first aware that cancellation is threatened or expiration, nonrenewal or expiration otherwise may occur.
14.5 Notice of Endorsement. Prior to commencement of performance, Contractor shall provide to the Lead State a written endorsement to the Contractor’s general liability insurance policy or other documentary evidence acceptable to the Lead State that (1) provides that written notice of cancellation will be delivered in accordance with the policy provisions, and (2) provides that the Contractor’s liability insurance policy will be primary, with any liability insurance of any Participating State as secondary and noncontributory.
14.6 Participating Entities. Contractor shall provide to Participating States and Participating Entities the same insurance obligations and documentation as those specified in Section XIII, except the endorsement is provided to the applicable Participating State or Participating Entity.
14.7 Furnishing of Certificates. Contractor shall furnish to the Lead State copies of certificates of all required insurance in a form sufficient to show required coverage within thirty (30) calendar days of the execution of this Master Agreement and prior to performing any work. Copies of renewal certificates of all required insurance will be furnished within thirty (30) days after any renewal date to the applicable state Participating Entity. Failure to provide evidence of coverage may, at the sole option of the Lead State, or any Participating Entity, result in this Master Agreement’s termination or the termination of any Participating Addendum.
14.8 Disclaimer. Insurance coverage and limits will not limit Contractor’s liability and obligations under this Master Agreement, any Participating Addendum, or any Purchase Order.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
XV. General Provisions
15.1 Records Administration and Audit
15.1.1 The Contractor shall maintain books, records, documents, and other evidence pertaining to this Master Agreement and Orders placed by Purchasing Entities under it to the extent and in such detail as will adequately reflect performance and administration of payments and fees. Contractor shall permit the Lead State, a Participating Entity, a Purchasing Entity, the federal government (including its grant awarding entities and the U.S. Comptroller General), and any other duly authorized agent of a governmental agency, to audit, inspect, examine, copy and/or transcribe Contractor's books, documents, papers and records directly pertinent to this Master Agreement or orders placed by a Purchasing Entity under it for the purpose of making audits, examinations, excerpts, and transcriptions. This right will survive for a period of six (6) years following termination of this Agreement or final payment for any order placed by a Purchasing Entity against this Master Agreement, whichever is later, or such longer period as is required by the Purchasing Entity’s state statutes, to assure compliance with the terms hereof or to evaluate performance hereunder.
15.1.2 Without limiting any other remedy available to any governmental entity, the Contractor shall reimburse the applicable Lead State, Participating Entity, or Purchasing Entity for any overpayments inconsistent with the terms of the Master Agreement or Orders or underpayment of fees found as a result of the examination of the Contractor’s records.
15.1.3 The rights and obligations herein exist in addition to any quality assurance obligation in the Master Agreement that requires the Contractor to self-audit contract obligations and that permits the Lead State to review compliance with those obligations.
15.2 Confidentiality, Non-Disclosure, and Injunctive Relief
15.2.1 Confidentiality. Contractor acknowledges that it and its employees or agents may, in the course of providing a Product under this Master Agreement, be exposed to or acquire information that is confidential to Purchasing Entity or Purchasing Entity’s clients.
15.2.1.1 Any and all information of any form that is marked as confidential or would by its nature be deemed confidential obtained by Contractor or its employees or agents in the performance of this Master Agreement, including but not necessarily limited to (1) any Purchasing Entity’s records, (2) personnel records, and (3) information concerning individuals, is confidential information of Purchasing Entity (“Confidential Information”).
15.2.1.2 Any reports or other documents or items (including software) that result from the use of the Confidential Information by Contractor shall be treated in the same manner as the Confidential Information.
15.2.1.3 Confidential Information does not include information that (1) is or becomes (other than by disclosure by Contractor) publicly known; (2) is furnished by Purchasing Entity to others without restrictions similar to those imposed by this Master Agreement; (3) is rightfully in Contractor’s possession without the obligation of nondisclosure prior to the time of its disclosure under this Master Agreement; (4) is obtained from a source other than Purchasing Entity without the obligation of confidentiality, (5) is disclosed with the written consent of Purchasing Entity; or (6) is independently developed by employees, agents or subcontractors of Contractor who can be shown to have had no access to the Confidential Information.
15.2.2 Non-Disclosure. Contractor shall hold Confidential Information in confidence, using at least the industry standard of confidentiality, and shall not copy, reproduce, sell, EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
assign, license, market, transfer or otherwise dispose of, give, or disclose Confidential Information to third parties or use Confidential Information for any purposes whatsoever other than what is necessary to the performance of Orders placed under this Master Agreement.
15.2.2.1 Contractor shall advise each of its employees and agents of their obligations to keep Confidential Information confidential. Contractor shall use commercially reasonable efforts to assist Purchasing Entity in identifying and preventing any unauthorized use or disclosure of any Confidential Information.
15.2.2.2 Without limiting the generality of the foregoing, Contractor shall advise Purchasing Entity, applicable Participating Entity, and the Lead State immediately if Contractor learns or has reason to believe that any person who has had access to Confidential Information has violated or intends to violate the terms of this Master Agreement, and Contractor shall at its expense cooperate with Purchasing Entity in seeking injunctive or other equitable relief in the name of Purchasing Entity or Contractor against any such person.
15.2.2.3 Except as directed by Purchasing Entity, Contractor will not at any time during or after the term of this Master Agreement disclose, directly or indirectly, any Confidential Information to any person, except in accordance with this Master Agreement, and that upon termination of this Master Agreement or at Purchasing Entity’s request, Contractor shall turn over to Purchasing Entity all documents, papers, and other matter in Contractor's possession that embody Confidential Information.
15.2.2.4 Notwithstanding the foregoing, Contractor may keep one (1) copy of such Confidential Information necessary for quality assurance, audits, and evidence of the performance of this Master Agreement.
15.2.3 Injunctive Relief. Contractor acknowledges that Contractor’s breach of Section 14.2 would cause irreparable injury to the Purchasing Entity that cannot be inadequately compensated in monetary damages. Accordingly, Purchasing Entity may seek and obtain injunctive relief against the breach or threatened breach of the foregoing undertakings, in addition to any other legal remedies that may be available.
Contractor acknowledges and agrees that the covenants contained herein are necessary for the protection of the legitimate business interests of Purchasing Entity and are reasonable in scope and content.
15.2.4 Purchasing Entity Law. These provisions will be applicable only to extent they are not in conflict with the applicable public disclosure laws of any Purchasing Entity.
15.2.5 NASPO ValuePoint. The rights granted to Purchasing Entities and Contractor’s obligations under this section will also extend to NASPO ValuePoint’s Confidential Information, including but not limited to Participating Addenda, Orders or transaction data relating to Orders under this Master Agreement that identify the entity/customer, Order dates, line-item descriptions and volumes, and prices/rates. This provision does not apply to disclosure to the Lead State, a Participating State, or any governmental entity exercising an audit, inspection, or examination pursuant to this Master Agreement. To the extent permitted by law, Contractor shall notify the Lead State of the identity of any entity seeking access to the Confidential Information described in this subsection.
15.2.6 Public Information. This Master Agreement and all related documents are subject to disclosure pursuant to the Lead State’s public information laws.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
15.3 Assignment/Subcontracts
15.3.1 Contractor shall not assign, sell, transfer, subcontract or sublet rights, or delegate responsibilities under this Master Agreement, in whole or in part, without the prior written approval of the Lead State.
15.3.2 The Lead State reserves the right to assign any rights or duties, including written assignment of contract administration duties, to NASPO ValuePoint and other third parties.
15.4 Changes in Contractor Representation. The Contractor must, within ten (10) calendar days, notify the Lead State in writing of any changes in the Contractor’s key administrative personnel managing the Master Agreement. The Lead State reserves the right to approve or reject changes in key personnel, as identified in the Contractor’s proposal. The Contractor shall propose replacement key personnel having substantially equal or better education, training, and experience as was possessed by the key person proposed and evaluated in the Contractor’s proposal.
15.5 Independent Contractor. Contractor is an independent contractor. Contractor has no authorization, express or implied, to bind the Lead State, Participating States, other Participating Entities, or Purchasing Entities to any agreements, settlements, liability or understanding whatsoever, and shall not to hold itself out as agent except as expressly set forth herein or as expressly set forth in an applicable Participating Addendum or Order.
15.6 Cancellation. Unless otherwise set forth herein, this Master Agreement may be canceled by either party upon 60 days’ written notice prior to the effective date of the cancellation. Further, any Participating Entity may cancel its participation upon thirty (30) days’ written notice, unless otherwise limited or stated in the Participating Addendum. Cancellation may be in whole or in part. Any cancellation under this provision will not affect the rights and obligations attending Orders outstanding at the time of cancellation, including any right of a Purchasing Entity to indemnification by the Contractor, rights of payment for Products delivered and accepted, rights attending any warranty or default in performance in association with any Order, and requirements for records administration and audit. Cancellation of the Master Agreement due to Contractor default may be immediate.
15.7 Force Majeure. Neither party to this Master Agreement shall be held responsible for delay or default caused by fire, riot, unusually severe weather, other acts of God, or acts of war which are beyond that party’s reasonable control. The Lead State may terminate this Master Agreement upon determining such delay or default will reasonably prevent successful performance of the Master Agreement.
15.8 Defaults and Remedies
15.8.1 The occurrence of any of the following events will be an event of default under this Master Agreement:
15.8.1.1 Nonperformance of contractual requirements;
15.8.1.2 A material breach of any term or condition of this Master Agreement;
15.8.1.3 Any certification, representation or warranty by Contractor in response to the solicitation or in this Master Agreement that proves to be untrue or materially misleading;
15.8.1.4 Institution of proceedings under any bankruptcy, insolvency, reorganization or similar law, by or against Contractor, or the appointment of a receiver or similar officer for Contractor or any of its property, which is not vacated or fully stayed within thirty (30) calendar days after the institution or occurrence thereof; or
15.8.1.5 Any default specified in another section of this Master Agreement.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
15.8.2 Upon the occurrence of an event of default, the Lead State shall issue a written notice of default, identifying the nature of the default, and providing a period of fifteen (15) calendar days in which Contractor shall have an opportunity to cure the default.
The Lead State shall not be required to provide advance written notice or a cure period and may immediately terminate this Master Agreement in whole or in part if the Lead State, in its sole discretion, determines that it is reasonably necessary to preserve public safety or prevent immediate public crisis. Time allowed for cure will not diminish or eliminate Contractor’s liability for damages, including liquidated damages to the extent provided for under this Master Agreement.
15.8.3 If Contractor is afforded an opportunity to cure and fails to cure the default within the period specified in the written notice of default, Contractor shall be in breach of its obligations under this Master Agreement and the Lead State shall have the right to exercise any or all of the following remedies:
15.8.3.1 Any remedy provided by law;
15.8.3.2 Termination of this Master Agreement and any related Contracts or portions thereof;
15.8.3.3 Assessment of liquidated damages as provided in this Master Agreement;
15.8.3.4 Suspension of Contractor from being able to respond to future bid solicitations;
15.8.3.5 Suspension of Contractor’s performance; and
15.8.3.6 Withholding of payment until the default is remedied.
15.8.4 Unless otherwise specified in the Participating Addendum, in the event of a default under a Participating Addendum, a Participating Entity shall provide a written notice of default as described in this section and shall have all of the rights and remedies under this paragraph regarding its participation in the Master Agreement, in addition to those set forth in its Participating Addendum. Unless otherwise specified in an Order, a Purchasing Entity shall provide written notice of default as described in this section and have all of the rights and remedies under this paragraph and any applicable Participating Addendum with respect to an Order placed by the Purchasing Entity. Nothing in these Master Agreement Terms and Conditions will be construed to limit the rights and remedies available to a Purchasing Entity under the applicable commercial code.
15.9 Waiver of Breach. Failure of the Lead State, Participating Entity, or Purchasing Entity to declare a default or enforce any rights and remedies will not operate as a waiver under this Master Agreement, any Participating Addendum, or any Purchase Order. Any waiver by the Lead State, Participating Entity, or Purchasing Entity must be in writing. Waiver by the Lead State or Participating Entity of any default, right or remedy under this Master Agreement or Participating Addendum, or by Purchasing Entity with respect to any Purchase Order, or breach of any terms or requirements of this Master Agreement, a Participating Addendum, or Purchase Order will not be construed or operate as a waiver of any subsequent default or breach of such term or requirement, or of any other term or requirement under this Master Agreement, any Participating Addendum, or any Purchase Order.
15.10 Debarment. The Contractor certifies that neither it nor its principals are presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation in public procurement or contracting by any governmental department or agency. This certification represents a recurring certification made at the time any Order is placed under this Master Agreement. If the Contractor cannot certify this statement, attach a written explanation for review by the Lead State.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
15.11 No Waiver of Sovereign Immunity
15.11.1 In no event will this Master Agreement, any Participating Addendum or any contract or any Purchase Order issued thereunder, or any act of the Lead State, a Participating Entity, or a Purchasing Entity be a waiver of any form of defense or immunity, whether sovereign immunity, governmental immunity, immunity based on the Eleventh Amendment to the Constitution of the United States or otherwise, from any claim or from the jurisdiction of any court.
15.11.2 This section applies to a claim brought against the Participating Entities who are states only to the extent Congress has appropriately abrogated the state’s sovereign immunity and is not consent by the state to be sued in federal court. This section is also not a waiver by the state of any form of immunity, including but not limited to sovereign immunity and immunity based on the Eleventh Amendment to the Constitution of the United States.
15.12 Governing Law and Venue
15.12.1 The procurement, evaluation, and award of the Master Agreement will be governed by and construed in accordance with the laws of the Lead State sponsoring and administering the procurement. The construction and effect of the Master Agreement after award will be governed by the law of the state serving as Lead State. The construction and effect of any Participating Addendum or Order against the Master Agreement will be governed by and construed in accordance with the laws of the Participating Entity’s or Purchasing Entity’s state.
15.12.2 Unless otherwise specified in the RFP, venue for any protest, claim, dispute, or action relating to the procurement, evaluation, or award, or concerning the terms of this Master Agreement, will be in the Nineteenth Judicial District Court, Parish of East Baton Rouge, State of Louisiana. If the Nineteenth Judicial District Court lacks jurisdiction over the protest, claim, dispute, or action, and such protest, claim, dispute, or action must be brought in a federal forum, venue will be in the United States District Court for the Middle District of Louisiana.
15.12.3 Venue for any protest, claim, dispute, or action concerning any Order placed against the Master Agreement or the effect of a Participating Addendum will be in the Purchasing Entity’s state.
15.12.4 If a claim is brought in a federal forum, then it must be brought and adjudicated solely and exclusively within the United States District Court for (in decreasing order of priority): the Lead State for claims relating to the procurement, evaluation, award, or contract performance or administration if the Lead State is a party; a Participating State if a named party; the state where the Participating Entity or Purchasing Entity is located if either is a named party.
15.13 Assignment of Antitrust Rights. Contractor irrevocably assigns to a Participating Entity who is a state any claim for relief or cause of action which the Contractor now has or which may accrue to the Contractor in the future by reason of any violation of state or federal antitrust laws (15 U.S.C. § 1-15 or a Participating Entity’s state antitrust provisions), as now in effect and as may be amended from time to time, in connection with any goods or services provided in that state for the purpose of carrying out the Contractor's obligations under this Master Agreement or Particip ating Addendum, including, at the Participating Entity's option, the right to control any such litigation on such claim for relief or cause of action.
15.14 Survivability. Unless otherwise explicitly set forth in a Participating Addendum or Order, the terms of this Master Agreement as they apply to the Contractor, Participating Entities, and Purchasing Entities, including but not limited to pricing and the reporting of sales and payment of administrative fees to NASPO ValuePoint, shall survive expiration of this Master Agreement and shall continue to apply to all Participating Addenda and Orders until the expiration thereof.
15.15 Contractor’s Cooperation. The Contractor has the duty to fully cooperate with the Lead State, NASPO ValuePoint, a Participating Entity, and a Purchasing Entity and provide any and all EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
requested information or documentation to the Lead State, NASPO ValuePoint, Participating Entity, or Purchasing Entity when requested. This applies even if this Master Agreement is terminated and/or a lawsuit is filed.
15.16 Federal Clauses.
15.16.1 Compliance with Civil Rights Laws. The Contractor agrees to abide by the requirements of the following as applicable: Title VI and Title VII of the Civil Rights Act of 1964, as amended by the Equal Employment Opportunity Act of 1972, Federal Executive Order 11246 as amended, the Federal Rehabilitation Act of 1973 as amended, the Vietnam Era Veteran’s Readjustment Assistance Act of 1974, Title IX of the Education Amendments of 1972, the Age Discrimination Act of 1975, the Fair Housing Act of 1968 as amended, and Contractor agrees to abide by the requirements of the Americans with Disabilities Act of 1990.
Contractor agrees not to discriminate in its employment practices, and will render services under this Contract without regard to race, color, religion, sex, national origin, veteran status, political affiliation, disability or age in any matter relating to employment.
Any act of discrimination committed by Contractor, or failure to comply with these statutory obligations when applicable shall be grounds for termination of this Contract.
15.16.2 Anti-Kickback Clause. The Contractor hereby agrees to adhere to the mandate dictated by the Copeland "Anti-Kickback" Act which provides that each Contractor or subgrantee shall be prohibited from inducing, by any means, any person employed in the completion of work, to give up any part of the compensation to which he is otherwise entitled.
15.16.3 Clean Air Act. The Contractor hereby agrees to adhere to the provisions which require compliance with all applicable standards, orders or requirements issued under Section 306 of the Clean Air Act which prohibits the use under non-exempt Federal contracts, grants or loans of facilities included on the Environmental Protection Agency (E PA) list of Violating Facilities.
15.16.4 Energy Policy and Conservation Act. The Contractor hereby recognizes the mandatory standards and policies relating to energy efficiency which are contained in the State energy conservation plan issued in compliance with the Energy Policy and Conservation Act (P.L. 94-163).
15.16.5 Clean Water Act. The Contractor hereby agrees to adhere to the provisions which require compliance with all applicable standards, orders, or requirements issued under Section 508 of the Clean Water Act which prohibits the use under non-exempt Federal contracts, grants or loans of facilities included on the Environmental Protection Agency (EPA) List of Violating Facilities.
15.16.6 Anti-Lobbying and Debarment Act. The Contractor will be expected to comply with Federal statutes required in the Anti-Lobbying Act and the Debarment Act.
15.16.7 Buy America. Contractor’s compliance or non-compliance with Buy America Requirements was submitted with Contractor’s Proposal and is indicated in Attachment B: Master Agreement Pricing.
15.17 E- Verify. The Contractor shall comply with the provisions of federal law pertaining to E -Verify in the performance of services under this Contract.
15.18 Headings. Descriptive headings in this Master Agreement are for convenience only and shall not affect the construction of this Master Agreement or meaning of contractual language.
15.19 Severability. If any term or condition of this Master Agreement or the application thereof is held invalid, such invalidity shall not affect other terms, conditions, or applications which can be given effect without the invalid term, condition or application; to this end the terms and conditions of this Master Agreement are declared severable.
15.20 Complete Agreement. This is the complete agreement between the parties with respect to the subject matter and all prior discussions and negotiations are merged into this agreement. This EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
_________________________________________________________________________________________________________________
Master Agreement is entered into with neither party relying on any statement or representation made by the other party not embodied in this Master Agreement and there are no other agreements or understanding changing or modifying the terms.
IN WITNESS WHEREOF, the parties have executed this Contract.
CONTRACTOR SIGNATURE: STATE OF LOUISIANA SIGNATURE:
By: By:
Name: Name: Tom Ketterer
Title: Title: Director of State Procurement
Date: Date:
DocuSign Envelope ID: 2AA2114F-35CF-4E58-9F66-49E63E5456A8 4/13/2023
VP of Sales, VSG Americas
Tim Vaughan
5/3/2023
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
Solicitation Number Doc554414018
_________________________________________________________________________________________________________________
Attachment B, SCOPE OF WORK
Attachment A
SCOPE OF WORK
I. Overview and Definitions
The Contractor shall provide the following categories of Deliverables to the Lead State, Participating Entities, and Purchasing Entities:
A. Vehicle Lifts and Shop Equipment for light- and heavy-duty vehicles; and B. Garage Associated Equipment.
Definitions
A. ALI means the Automotive Lift Institute, Inc.
B. ANSI means the American National Standards Institute.
II. Master Agreement Deliverables
A. Vehicle Lifts and Accessories. All vehicle lifts and accessories available under the Master Agreement shall meet the current Automotive Lift Institute, Inc. (ALI) certifications and should comply with the American National Standards Institute (ANSI) standards. All standard lifts shall be ALI certified and posted on the ALI website (http://www.autolift.org/). Vehicles Lifts and accessories shall comply with all federal, state, and local laws, regulations, and safety standards.
Any lifts and accessories purchased under this contract shall be delivered with all standard equipment for operational use along with additional accessories and manuals/literature requested.
Garage Associated Equipment. Garage Associated Equipment and Accessories shall comply with all federal, state, and local laws, regulations and safety standards. Only equipment complying with ANSI standards should be provided under this Master Agreement. Garage equipment shall be new and the most current production model. Any shop equipment and accessories purchased under this contract shall be delivered with all standard equipment for operational use along with additional accessories and manuals/literature requested.
III. Contractor Responsibilities and Tasks
A. Contractor shall perform site inspections at no additional charge. The purpose of the site inspection is to obtain a product recommendation from the Contractor. Upon completion of a site visit, Contractor shall provide the following:
1. Lift and accessory recommendation
2. Contract pricing, and
3. Installation cost.
B. Contractor recommendations are not required to be purchased.
C. Contractor shall provide installation and repair services of any equipment purchased under this contract and should be able to provide deconstruction and removal of existing equipment.
D. Contractor shall provide training in the safe operation of purchased equipment, as requested.
E. For vehicle lifts, Contractor shall be either the manufacturer of the lift as named on ALI lift certification documents or an authorized distributor for the manufacturer of the lift as named on ALI lift certification documents.
F. For garage-associated equipment, the Contractor shall be either the manufacturer or an authorized distributor of the equipment.
EXHIBIT 1
Master Agreement for
VEHICLE LIFTS AND GARAGE ASSOCIATED EQUIPMENT
Solicitation Number Doc554414018
_________________________________________________________________________________________________________________
Attachment B, SCOPE OF WORK
G. The Contractor shall supply a list of all authorized distributors by State.
H. For vehicle lifts, Contractor shall provide a minimum warranty of one (1) year on all components and labor.
I. For garage–associated equipment, Contractor shall provide a warranty on all components and labor.
J. Contractor shall be responsible for any of the following costs that are a result of equipment/mechanical failures incurred under normal operation conditions during the warranty period:
1. Inspections
2. Adjustments
3. Parts
4. Labor
5. Travel, pickup and/or delivery costs.
K. All equipment must meet federal and state safety requirements at the time of purchase.
L. Contractor shall provide authorized certified manufacturer technicians for all needed warranty and non-warranty repairs and preventative maintenance. Parts and workmanship shall be in compliance with OEM and the applicable ANSI and/or ALI standards.
M. Contractor shall be able to service a physical address within the Continental United States during relevant local working hours.
IV. Lead State Responsibilities and Tasks
A. The Lead State and Participating States will measure and evaluate the Contractor’s performance quarterly to ensure contract requirements are being met.
EXHIBIT 1
NASPO ValuePoint
PARTICIPATING ADDENDUM
VEHICLE LIFTS AND GARAGE
ASSOCIATED EQUIPMENT
Led by the State of Louisiana
Master Agreement #: CW7254
Contractor: Vehicle Services Group LLC
Participating Entity: STATE OF XXXXX
The following products or services are included in this contract portfolio:
• All products and accessories listed on the Contractor page of the NASPO ValuePoint website.
Master Agreement Terms and Conditions:
1. Scope: This addendum covers the Vehicle Lifts and Garage Associated Equipment led by the State of Louisiana for use by state agencies and other entities located in the Participating State [or State Entity] authorized by that State’s statutes to utilize State contracts with the prior approval of the State’s Chief Procurement Official.
Removable Instruction: P articipating States should ensure that paragraph 2 properly defines the scope of participation. The model language in paragraph enables participation by all political subdivisions, institutions of higher education, and other entities included in the state’s statewide contract program.
2. Participation: Thi s NASPO ValuePoint Master Agreement may be used by all state agencies, institutions of higher institution, political subdivisions and other entities authorized to use statewide contracts in the State of [xxxxxxx]. Issues of interpretation and eligibility for participation are solely within the authority of the State Chief Procurement Official.
3. P rimary Contacts: The primary contact individuals for this Participating Addendum are as follows (or their named successors):
Contractor
Name:
Address:
Telephone:
Fax:
Email:
EXHIBIT 1
NASPO ValuePoint
PARTICIPATING ADDENDUM
VEHICLE LIFTS AND GARAGE
ASSOCIATED EQUIPMENT
Led by the State of Louisiana
Participating Entity
Name:
Address:
Telephone:
Fax:
Email:
4. PARTICIPATING ENTITY MODIFICATIONS OR ADDITIONS TO THE MASTER
AGREEMENT
These modifications or additions apply only to actions and relationships within the Participating Entity.
Participating Entity must check one of the boxes below.
[ ] No changes to the terms and conditions of the Master Agreement are required.
[ ] The following changes are modifying or supplementing the Master Agreement terms and conditions.
[R emovable Instruction: Insert text here to address specific changes to the terms and conditions. Indicate which section numbers of the Master Agreement are modified. If no changes are required, check the box above and delete this paragraph.]
5. Leas e Agreements : [If applicable, insert a statement about whether or not equipment lease agreement terms and conditions included in the Master Agreement have been approved for use by the Participating State and any restrictions or requirements for the use of the lease agreement language in the Master Agreement. If not applicable, mark Section 4 as “Reserved”.]
6. S
ubcontractors : All contactors, dealers, and resellers authorized in the State of [xxxxxx], as shown on the dedicated Contractor (cooperative contract) website, are approved to provide sales and service support to participants in the NASPO ValuePoint Master Agreement. The contractor’s dealer participation will be in accordance with the terms and conditions set forth in the aforementioned Master Agreement.
EXHIBIT 1
NASPO ValuePoint
PARTICIPATING ADDENDUM
VEHICLE LIFTS AND GARAGE
ASSOCIATED EQUIPMENT
Led by the State of Louisiana
7. Orders: Any order placed by a Participating Entity or Purchasing Entity for a product and/or service available from this Master Agreement shall be deemed to be a sale under (and governed by the prices and other terms and conditions) of the Master Agreement unless the parties to the order agree in writing that another contract or agreement applies to such order.
I
N WITNESS, WHEREOF, the parties have executed this Addendum as of the date of execution by both parties below.
Participating Entity:
Contractor:
Signature:
Signature:
Name:
Name:
Title:
Title:
Date:
Date:
[Additional signatures may be added if required by the Participating Entity] EXHIBIT 1
NASPO ValuePoint
PARTICIPATING ADDENDUM
VEHICLE LIFTS AND GARAGE
ASSOCIATED EQUIPMENT
Led by the State of Louisiana
For questions on executing a participating addendum, please contact:
NASPO ValuePoint
Cooperative Portfolio Manager: Joel E. Atkinson
Telephone: 850-848-1250
Email: [email protected]
[P lease email fully executed PDF copy of this
document to
[email protected]
to support documentation of participation and posting
in appropriate data bases.]
EXHIBIT 1
41.0%
Manufacturer Part # MODEL Product Description Alpha Code Product Type Product Discount Code GOV List Price NASPO Discount NASPO Net Price Meets Buy America SPOA10 SPOA10N1400BL Lift, 2-post 10,000 lb Asym 2-stage w/flip-up adapters SPOA10 LIGHT DUTY LS $ 8,922.00 41.0% 5,263.98$ Yes SPOA10 71" SPOA10N1405BL Lift, 2-post 10,000 lb Asym 2-stage w/flip-up adapters, 71" Rise SPOA10 LIGHT DUTY LS $ 9,294.00 41.0% 5,483.46$ Yes SPOA10 EH2 SPOA10N1407BL Lift, 2-post 10,000 lb Asym 2-stage w/flip-up adapters EH2 SPOA10 LIGHT DUTY LS $ 10,095.00 41.0% 5,956.05$ Yes SPOA10-RA SPOA10N16G0BL Lift, 2-post 10,000 lb Asym w/TRIO rubber adapters (To use with framed vehicles, also order T100273.) SPOA10 LIGHT DUTY PS $ 11,435.00 41.0% 6,746.65$ Yes SPOA10-RA 71" SPOA10N16G5BL Lift, 2-post 10,000 lb Asym w/TRIO rubber adapters 71" Rise SPOA10 LIGHT DUTY PS $ 11,877.00 41.0% 7,007.43$ Yes SPOA10-RA EH2 SPOA10N16G7BL Lift, 2-post 10,000 lb Asym w/TRIO rubber adapters EH2 SPOA10 LIGHT DUTY PS $ 12,816.00 41.0% 7,561.44$ Yes SPOA10-TA SPOA10N16T0BL
Lift, 2-post 10,000 lb Asym w/TRIO truck adapters.
Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SPOA10 LIGHT DUTY PS $ 11,435.00
41.0% 6,746.65$ Yes
SPOA10-TA 71" SPOA10N16T5BL Lift, 2-post 10,000 lb Asym w/TRIO truck adapters 71" Rise SPOA10 LIGHT DUTY PS $ 11,877.00 41.0% 7,007.43$ Yes SPOA10-TA EH2 SPOA10N16T7BL Lift, 2-post 10,000 lb Asym w/TRIO truck adapters EH2 SPOA10 LIGHT DUTY PS $ 12,816.00 41.0% 7,561.44$ Yes SPOA10-FA SPOA10N1600BL Lift, 2-post 10,000 lb Asym w/TRIO flip-up adapters SPOA10 LIGHT DUTY PS $ 11,435.00 41.0% 6,746.65$ Yes SPOA10-FA 71" SPOA10N1605BL Lift, 2-post 10,000 lb Asym w/TRIO flip-up adapters 71" Rise SPOA10 LIGHT DUTY PS $ 11,877.00 41.0% 7,007.43$ Yes SPOA10-FA EH2 SPOA10N1607BL Lift, 2-post 10,000 lb Asym w/TRIO flip-up adapters EH2 SPOA10 LIGHT DUTY PS $ 12,816.00 41.0% 7,561.44$ Yes SPOA7-LP-A SPOA7N5L0BL Lift, 2-post 7000 lb Asym 2-stage low profile RA arms SPOA7 LIGHT DUTY LS $ 9,877.00 41.0% 5,827.43$ Yes SPOA7-LPA 71" SPOA7N5L5BL Lift, 2-post 7000 lb Asym 2-stage low profile RA arms 71" Rise SPOA7 LIGHT DUTY LS $ 10,256.00 41.0% 6,051.04$ Yes SPOA7-LPA EH2 SPOA7N5L7BL Lift, 2-post 7000 lb Asym 2-stage low profile RA arms EH2 SPOA7 0 0.00 $ 11,067.00 41.0% 6,529.53$ Yes SPOA7-MP SPOA7N13X0BL
Lift, 2-post 7000 lb Asym Movable Pad Drive Over.
Includes (4) FJ2428E spacer blocks and hinged approach
ramps. Primarily used on unibody vehicles.
SPOA7 LIGHT DUTY PS $ 13,347.00
41.0% 7,874.73$ Yes
SPOA7-MP 71" SPOA7N13X5BL Lift, 2-post 7000 lb Asym Movable Pad Drive Over 71" Rise SPOA7 LIGHT DUTY PS $ 15,884.00 41.0% 9,371.56$ Yes SPOA7-MP EH2 SPOA7N13X7BL Lift, 2-post 7000 lb Asym Movable Pad Drive Over EH2 SPOA7 LIGHT DUTY PS $ 14,518.00 41.0% 8,565.62$ Yes SPO10 SPO10N1400BL Lift, 2-post 10,000 lb Sym 2-stage w/flip-up adapters SPO10 LIGHT DUTY LS $ 8,922.00 41.0% 5,263.98$ Yes SPO10 71" SPO10N1405BL Lift, 2-post 10,000 lb Sym 2-stage w/flip-up adapters 71" Rise SPO10 LIGHT DUTY LS $ 9,294.00 41.0% 5,483.46$ Yes SPO10 EH2 SPO10N1407BL Lift, 2-post 10,000 lb Sym 2-stage w/flip-up adapters EH2 SPO10 LIGHT DUTY LS $ 10,095.00 41.0% 5,956.05$ Yes SPO12-TA SPO12N14T5BL Lift, 2-post 12,000 lb Sym 3-stage. Includes (4) 3 1/2" FJ6171-1 extensions and (4) 5" FJ6171-2 extensions. SPO12 LIGHT DUTY PS $ 14,472.00 41.0% 8,538.48$ Yes SPO12-TA EH1 SPO12N14T6BL Lift, 2-post 12,000 lb Sym 3-stage EH1 SPO12 LIGHT DUTY PS $ 15,663.00 41.0% 9,241.17$ Yes SPO12-TA EH2 SPO12N14T7BL Lift, 2-post 12,000 lb Sym 3-stage EH2 SPO12 LIGHT DUTY PS $ 16,096.00 41.0% 9,496.64$ Yes SPO12-TA EH3 SPO12N14T8BL Lift, 2-post 12,000 lb Sym 3-stage EH3 SPO12 LIGHT DUTY PS $ 16,910.00 41.0% 9,976.90$ Yes SPO12-TALC SPO12N14TLBL Lift, 2-post 12,000 lb Sym 3-stage low ceiling SPO12 LIGHT DUTY PS $ 15,170.00 41.0% 8,950.30$ Yes SPO12-WIDE SPO12N14W6BL Lift, 2-post 12,000 lb Sym 3-stage wide SPO12 LIGHT DUTY PS $ 16,217.00 41.0% 9,568.03$ Yes SPO12-WIDE-EH1 SPO12N14W7BL Lift, 2-post 12,000 lb Sym 3-stage wide EH1 SPO12 LIGHT DUTY PS $ 17,012.00 41.0% 10,037.08$ Yes FJ5115 FJ6115BK Adapter kit, aircraft tug lift, 14,000 lb FJ6115 ACC. AC $ 723.00 25.0% 542.25$ Yes SPO16 SPO16N1T0BL
Lift, 2-post 16,000 lb, Single Phase (no 3-phase) Frame Contact Lift. Clear Floor, All TRIO (TM) Arms, Electric- Hydraulic Operation. With Overhead Adjustments of 15
ft., 15 ft. 6 in., 16 ft. and 16 ft. 6 in. Air Operated Single Point Release Locking Latches. Comes with Stack
Adapters.
SPO16 CROSS-OVER PC $ 36,768.00
41.0% 21,693.12$ Yes
SPO16CARGO SPO16N1A0BL Lift, 2-post 16,000 lb. 3 Stage Arms SPO16 CROSS-OVER PC $ 36,768.00 41.0% 21,693.12$ Yes SPO16-LC SPO16N1TLBL Lift, 2-post 16,000 lb. low ceiling with overhead adjustments of 13 ft. 6 in. and 14 ft. 6 in.
SPO16 CROSS-OVER PC $ 36,768.00 41.0% 21,693.12$ Yes SPO16CARGO-LC SPO16N1ALBL Lift, 2-post 16,000 lb. low ceiling with overhead adjustments of 13 ft. 6 in. and 14 ft. 6 in. 3 Stage Arms SPO16 CROSS-OVER PC $ 36,768.00 41.0% 21,693.12$ Yes EXHIBIT 1
SPO20 SPO20N1T0BL
Lift, 2-post 20,000 lb, Single Phase (no 3-phase) Frame Contact Lift. Clear Floor, All TRIO (TM) Arms, Electric- Hydraulic Operation. With Overhead Adjustments of 15
ft., 15 ft. 6 in., 16 ft. and 16 ft. 6 in. Air Operated Single Point Release Locking Latches. Comes with Stack
Adapters.
SPO20 CROSS-OVER PC $ 45,584.00
41.0% 26,894.56$ Yes
SPO20-LC SPO20N1TLBL Lift, 2-post 20,000 lb. low ceiling with overhead adjustments of 13 ft. 6 in. and 14 ft. 6 in.
SPO20 CROSS-OVER PC $ 45,584.00 41.0% 26,894.56$ Yes SPOA10-RASW SPOA10U16G5BL Lift, 2-post 10,000 lb Asym w/TRIO rubber adapters, SW (To use with framed vehicles, also order T100273.)
SPOA10 0 0.00 $ 15,657.00 41.0% 9,237.63$ Yes SPOA10-TASW EH2 SPOA10U16T7BL Lift, 2-post 10,000 lb Asym w/TRIO truck adapters, SW EH2
SPOA10 0 0.00 $ 17,032.00 41.0% 10,048.88$ Yes SPOA10-FASW SPOA10U1605BL Lift, 2-post 10,000 lb Asym w/TRIO flip-up adapters, SW SPOA10 0 0.00 $ 15,657.00 41.0% 9,237.63$ Yes SPOA7-MPSW SPOA7U13X5BL
Lift, 2-post 7000 lb Asym w/movable pads, SW Includes
(4) FJ2428E spacer blocks and hinged approach ramps.
Primarily used on unibody vehicles.
SPOA7 0 0.00 $ 18,975.00
41.0% 11,195.25$ Yes
SPO12-SW SPO12U14T5BL Lift, 2-post 12,000 lb Sym 3-stage SW Includes (4) 3 1/2" FJ6171-1 extensions and (4) 5" FJ6171-2 extensions. SPO12 0 0.00 $ 18,090.00
41.0% 10,673.10$ Yes
SPO12-SW EH2 SPO12U14T7BL Lift, 2-post 12,000 lb Sym 3-stage SW EH2 SPO12 0 0.00 $ 19,713.00 41.0% 11,630.67$ Yes SPO16-SW SPO16U1T0BL Lift, 2-post 16,000 lb. Shockwave DC Controls & Power. SPO16 CROSS-OVER PC $ 42,456.00 41.0% 25,049.04$ Yes SPO20-SW SPO20U1T0BL Lift, 2-post 20,000 lb. Shockwave DC Controls & Power. SPO20 CROSS-OVER PC $ 50,782.00 41.0% 29,961.38$ Yes FJ7923 FJ7923 Latch cable, SS FJ7923 ACC. AC $ 102.00 25.0% 76.50$ No FA595 FA595BL Power unit splash guard FA595 ACC. AC $ 133.00 25.0% 99.75$ No FA7129 FA7129BK Power unit bracket extension FA7129BK ACC. AC $ 87.00 25.0% 65.25$ No FA5208 FA5208BK • Seismic model of the DC(SW) SPOA10 Std. Hgt. lift with TA FA5208BK ACC. AC $ 568.00 25.0% 426.00$ Yes N2244YL N2244YL Arm kit, 3-stage telescoping arm kit for SPOA9 and SPOA7 200-400
N2244 ACC. AC $ 3,202.00 25.0% 2,401.50$ Yes FJ6227 FJ6227BL Retrofit kit, Movable pad for SPOA10-500 series and above. Reduces lift capacity to 7,000 lbs.
FJ6227BL ACC. AC $ 8,310.00 25.0% 6,232.50$ Yes SMO14L SMO14N101YBL Lift, 4-post 14,000 lb open front, 182" max wheel base SMO14T 0 0.00 $ 19,573.00 41.0% 11,548.07$ No SMO14EL2 SMO14N102YBL Lift, 4-post 14,000 lb open front, 215" max wheel base SMO14T LIGHT DUTY LS $ 20,571.00 41.0% 12,136.89$ No SM14L SM14N101YBL Lift, 4-post 14,000 lb, 182" max wheel base SM14T LIGHT DUTY LS $ 15,052.00 41.0% 8,880.68$ No SM14EL2 SM14N102YBL Lift, 4-post 14,000 lb, 215" max wheel base SM14T LIGHT DUTY LS $ 16,023.00 41.0% 9,453.57$ No SM18 SM18N000BL Lift, 4-post 18,000 lb, 194" max wheel base SM18 CROSS-OVER CL $ 24,847.00 41.0% 14,659.73$ Yes SM18-EL2 SM18N001BL Lift, 4-post 18,000 lb, 230" max wheel base SM18 CROSS-OVER CL $ 27,220.00 41.0% 16,059.80$ Yes RFL25 RFL25N010BL Lift, 4-post 25,000 lb, 163" max wheel base, Forklift Lift RFL25 CROSS-OVER CL $ 61,684.00 41.0% 36,393.56$ No SM30-S SM30N010BL Lift, 4-post 30,000 lb, 235" max wheel base SM30 CROSS-OVER CL $ 46,396.00 41.0% 27,373.64$ Yes SM30-L SM30N011BL Lift, 4-post 30,000 lb, 271" max wheel base SM30 CROSS-OVER CL $ 50,617.00 41.0% 29,864.03$ Yes SM30-EL3 SM30N012BL Lift, 4-post 30,000 lb, 307" max wheel base SM30 CROSS-OVER CL $ 54,836.00 41.0% 32,353.24$ Yes SMO14L-SW SMO14U101TYBL Lift, 4-post 14,000 lb open front, 182" max wheel base SW SMO14T 0 0.00 $ 23,427.00 41.0% 13,821.93$ No SMO14EL2-SW SMO14U102TYBL Lift, 4-post 14,000 lb open front, 215" max wheel base SW SMO14T LIGHT DUTY PS $ 24,426.00 41.0% 14,411.34$ No SM14L-SW SM14U101YBL Lift, 4-post 14,000 lb, 182" max wheel base SW SM14T LIGHT DUTY PS $ 19,109.00 41.0% 11,274.31$ No SM14EL2-SW SM14U102YBL Lift, 4-post 14,000 lb, 215" max wheel base SW SM14T LIGHT DUTY PL $ 20,077.00 41.0% 11,845.43$ No X14 X14N0010BL Surface mounted lift, 14,000 lb general service, 198" max wheel base - Available in blue only
0 0 0.00 $ 41,106.00 41.0% 24,252.54$ Yes X14-FM X14N0011BL Flush mount lift, 14,000 lb general service, 198" max wheel base - Available in blue only
0 0 0.00 $ 41,106.00 41.0% 24,252.54$ Yes FC5974 FC5974BL Filler plate, radius gauge, 17.5" opening KIT OF TWO FC5974BL ACC. AC $ 512.00 25.0% 384.00$ No FC5102 FC5102BL Filler plate, radius gauge, 18 5/16" opening KIT OF TWO FC5102 ACC. AC $ 431.00 25.0% 323.25$ No RJ6000Y-R RJ6100YM Rolling Jack, 6000 lb. SM121, SM/SMO122 and AR/ARO122 Prior to April 2000
RJ6100YM ACC. AC $ 6,395.00 25.0% 4,796.25$ Yes RJ7000Y RJ7100YM Rolling Jack, 7000 lb. Includes rubber adapter blocks: (2)
1.5” tall FJ2427E and (2) 3” tall FJ2428E.
RJ7100YM ACC. AC $ 7,047.00 25.0% 5,285.25$ Yes EXHIBIT 1
RJ9000YBK RJ9100YM
Rolling Jack, 9000 lb. For SM18, Includes rubber adapter blocks: (2) .5” tall SB700071Y, (2) 1.5” tall FJ2427E and (2) 3” tall FJ2428E.
RJ9100YM ACC. AC $ 8,024.00
25.0% 6,018.00$ Yes
RJ9000Y-1BK RJ9000Y-1BK Rolling Jack, 9000 lb. For SM181 Only RJ9000Y-1 ACC. AC $ 7,988.00 25.0% 5,991.00$ Yes RJ9000Y-2BK RJ9000Y-2BK Rolling Jack, 9000 lb. For SM30 Lifts. For Passenger Cars Trucks Only. RJ9000Y-2 ACC. AC $ 8,907.00 25.0% 6,680.25$ Yes VSJ30PRU VSJ30PRU Rolling Jack, 7,000 lb for X14 and XA14 VSJ30PRU ACCS WA $ 7,194.00 25.0% 5,395.50$ Yes RJ152BK RJ152BK
Heavy Duty Rolling Jack, 15,000 lb. For SM30, Series Lifts.
S/T RJ150 but with a lower profile top and drop in
adapters.
RJ152BK ACC. AC $ 18,464.00
25.0% 13,848.00$ No
S100077Kit S100077Kit Efficiency package includes (2) RJ7000 and Airline Kit (uninstalled) for SM/SMO14. S100077 ACC. AC $ 14,912.00 25.0% 11,184.00$ No S100016 S100016BL Efficiency package, (2) RJ6000 Rolling Bridges, FA5501-1 Bolt-On Alignment Package S100016 ACC. AC $ 19,323.00 25.0% 14,492.25$ Yes S100017 S100017BL
Efficiency package includes Two (2) RJ6000 Rolling
Bridges, Airline Kit (uninstalled), bolt-on alignment
package and stainless steel radius gauge for SM/SMO123.
S100017 ACC. AC $ 21,450.00
25.0% 16,087.50$ No
SB700071Y SB700071Y Adapter, polymer,1/2". Included in FJ2498 kit. SB700071Y ACC. AC $ 32.00 25.0% 24.00$ No FJ2427 FJ2427 Adapter, polymer, 1-1/2". Included in FJ2439 kit. FJ2427 ACC. AC $ 40.00 25.0% 30.00$ No FJ2428 FJ2428 Adapter, polymer, 3". Included in FJ2440 kit. FJ2428 ACC. AC $ 54.00 25.0% 40.50$ No SB100040YL SB100040YL Adapter kit, extended height, SUV straight axle. Kit includes (2) 7” Adapters. For RJ9000Y.
SB100040YL ACC. AC $ 282.00 25.0% 211.50$ No SB100017YL SB100017YL Adapter kit, extended height, SUV straight axle. Kit includes (2) SB300055 7” Adapters. For RJ7000.
SB100017 ACC. AC $ 282.00 25.0% 211.50$ No SB100003YL SB100003YL Adapter kit, extended height, SUV straight axle. Kit includes (2) SB300019 7” Adapters. For RJ6000.
SB100003 ACC. AC $ 282.00 25.0% 211.50$ No FJ6211BK FJ6211BK Adapters, extended, pad lifts. Includes (4) FJ6205 7” truck adapters.
FJ6211 ACC. AC $ 622.00 25.0% 466.50$ Yes S100151 S100151BL
Ramp chock kit, drive-thru, SM/SMO/ARO14 -100 Series,
SM101. Includes Two (2) S110405Y Ramps (40-1/2”) and
(2) Hinge Pins.
S100151BL ACC. AC $ 1,238.00
25.0% 928.50$ No
S100152Y S100152YBL
Ramp chock kit, extended, SM/SMO/ARO14 -100, SM101.
Includes Two (2) S110406Y Ramps (49-7/16”) and (2)
Hinge Pins. ($160 Adder Only When Substituted For
Standard Length Ramps On New Lift Order.)
S100152YBL ACC. AC $ 1,274.00
25.0% 955.50$ No
S100013 S100013BL
Ramp chock kit, extended, SM/AR18. Includes Two (2)
S110085 Ramps and (2) Hinge Pins. ($160 Adder Only
When Substituted For Standard Length Ramps On New
Lift Order.)
S100013 ACC. AC $ 1,760.00
25.0% 1,320.00$ Yes
FC5825BK FC5825BK Ramp chock Kit, drive-thru, SM18. Includes Two (2) FC5810-43 Ramps and (2) Hinge Pins.
FC5825 ACC. AC $ 1,622.00 25.0% 1,216.50$ No FC5780-3 FC5780-3BL Ramp chock, drive thru, SM300-200, SM30 Series Lifts
QTY OF ONE
FC5780-3 ACC. AC $ 996.00 25.0% 747.00$ No FC5781-7 FC5781-7BL Ramp chock, extended, SM300-200. QTY 1 $733 adder when ordered with lift
FC5781-7 ACC. AC $ 1,609.00 25.0% 1,206.75$ No FC663BK FC663BK Jack tray, rolling SM/SMO122, SM/SMO123, SM/SM014. (Bottle Jacks Are Not Included)
FC663 ACC. AC $ 1,178.00 25.0% 883.50$ No FC613BK FC613BK Jack tray, rolling, SM30. (Bottle Jacks Not Included) FC613 ACC. AC $ 6,121.00 25.0% 4,590.75$ No FC5378BK FC5378BK Work steps, bolt-on, 4-post FC5378 ACC. AC $ 1,184.00 25.0% 888.00$ No FC5967BK FC5967BK Drain pan, 30 Gallon rolling, low profile, QL4P, SM/SMO122, SM/SMO14, SM18, YA-12 at 43” setting
FC5967 ACC. AC $ 1,830.00 25.0% 1,372.50$ No FC5968BK FC5968BK Drain pan, 30 Gallon rolling, SM30 FC5968BK ACC. AC $ 2,378.00 25.0% 1,783.50$ No FC5247 FC5247 Hose, 8 ft oil drain w/QD fitting FC5247 ACC. AC $ 234.00 25.0% 175.50$ No FC5760-14 FC5760-14 Internal Air Line Kit (retrofit) for all SM/SMO14 Series, SM18, QL12 and Y-Lift
FC5760-14 ACC. AC $ 879.00 25.0% 659.25$ No FC7138 FC7138 Internal Air Line Kit (retrofit) for all X14 and XA14 FC7138 ACC. AC $ 901.00 25.0% 675.75$ No FC5393BK FC5393KITBK Shim kit, 1/4”, SM/SMO, AR/ARO123, QL Models, SM18, SM30 4" OF SHIMS
FC5393 ACC. AC $ 535.00 25.0% 401.25$ No FC5414 FC5414BK Shim kit, 1/4”, SM/SMO, AR/ARO123, QL Models, SM18, SM30 8" OF SHIMS
FC5414 ACC. AC $ 775.00 25.0% 581.25$ No EXHIBIT 1
S100093 S100093BK Shim kit, front Of SMO14/ARO14, (2) 1/4” & (4) 1/16” Shims. S100093BK ACC. AC $ 431.00 25.0% 323.25$ Yes FA5211 FA5211 Turntable, 7500 lb SS FA5211 ACC. AC $ 2,615.00 25.0% 1,961.25$ No FA5211KIT FA5211KIT Turntable kit, 7500 lb FA5211KIT ACC. AC $ 5,101.00 25.0% 3,825.75$ Yes TT1001 TT1001KIT Radius gauge kit, 3000 lb, SS. Includes (2) FA5153 S/S radius gauges; and (4) Retaining Bars -- Part # FA5153-1. TT1001KIT ACC. AC $ 3,363.00
25.0% 2,522.25$ No
FA5155KIT FA5155KIT
Radius gauge kit, 3000 lb. Includes (2) Standard Turning Radius Gauges--Part #FA5157; and (4) Retaining Bars--Part #FA5153-1.
FA5155 ACC. AC $ 2,345.00
25.0% 1,758.75$ No
S130205 S130205 Radius gauge, 4500 lb, no pointer, SS (2 required) S130205 ACC. AC $ 1,421.00 25.0% 1,065.75$ No S130237 S130237 Radius gauge, AR18, no pointer, SS (2 required) S130237 ACC. AC $ 1,670.00 25.0% 1,252.50$ No S100147 S100147 Shield kit, rear SS, AR/ARO14 -100 Series S100147 ACC. AC $ 2,652.00 25.0% 1,989.00$ No S100148 S100148 Shield kit, front SS, AR/ARO14 -100 Series S100148 ACC. AC $ 2,380.00 25.0% 1,785.00$ Yes S100096 S100096 Shield kit, rear SS, AR/ARO14 S100096 ACC. AC $ 2,652.00 25.0% 1,989.00$ No S100095 S100095 Shield kit, front SS, AR/ARO14 S100095 ACC. AC $ 2,380.00 25.0% 1,785.00$ No FC7118 FC7118 Shield kit, rear SS, AR/ARO12 FC7118 ACC. AC $ 2,071.00 25.0% 1,553.25$ No S100052 S100052 Shield kit, front SS AR/ARO12 S100052 ACC. AC $ 2,380.00 25.0% 1,785.00$ No FA647 FA647BL Runway extension, 2 ft, SM/SMO 12,000 lb FA647 ACC. AC $ 1,228.00 25.0% 921.00$ No S100060 S100060BL Runway extension, 2 ft, SM/SMO 14,000 lb. S100060 ACC. AC $ 1,638.00 25.0% 1,228.50$ No S100142YBL S100142YBL Runway extension, 2 ft for SM14-100 S100142YBL ACC. AC $ 1,638.00 25.0% 1,228.50$ No S100012 S100012BL Runway extension, 2 ft SM18/180 S100012 ACC. AC $ 1,638.00 25.0% 1,228.50$ Yes S100018 S100018BL Runway extension, 3 ft SM300-200/300, SM30 S100018 ACC. AC $ 3,455.00 25.0% 2,591.25$ No FA641-18 FA641-18BL Runway extension, 3 ft SM300-100 FA641-18 ACC. AC $ 4,670.00 25.0% 3,502.50$ No ARO14L ARO14N101YBL Lift, 4-post 14,000 lb alignment, open front, 182" max wheel base
ARO14T 0 0.00 $ 46,818.00 41.0% 27,622.62$ No ARO14-EL2 ARO14N102TYBL Lift, 4-post 14,000 lb alignment, open front, 215" max wheel base
ARO14T LIGHT DUTY LS $ 47,641.00 41.0% 28,108.19$ No AR18 AR18N110BL Lift, 4-post 18,000 lb alignment, 194" max wheel base AR18 CROSS-OVER CL $ 49,770.00 41.0% 29,364.30$ Yes AR18-EL AR18N111BL Lift, 4-post 18,000 lb alignment, 230 max wheel base AR18 CROSS-OVER CL $ 53,494.00 41.0% 31,561.46$ Yes ARO14L-SW ARO14U101YBL Lift, 4-post 14,000 lb alignment, open front SW, 182" max wheel base SW
ARO14T 0 0.00 $ 50,163.00 41.0% 29,596.17$ No ARO14-EL2-SW ARO14U102TYBL Lift, 4-post 14,000 lb alignment, open front SW, 215" max wheel base SW
ARO14T LIGHT DUTY PS $ 50,985.00 41.0% 30,081.15$ No S100130-L S100130MBL Alignment kit, bolt-on SM/SMO14-100 Series w/SS radius gauges, slip plates 182" WB
S100130MBL ACC. AC $ 12,875.00 25.0% 9,656.25$ No S100131-EL2 S100131MBL Alignment kit, bolt-on SM/SMO14-100 Series w/SS radius gauges, slip plates 215" WB
S100131MBL ACC. AC $ 13,715.00 25.0% 10,286.25$ No S100136-L S100136MBL Alignment kit, bolt-on SM/SMO14-100 Series w/slip plates 182" WB
S100136MBL ACC. AC $ 6,408.00 25.0% 4,806.00$ No S100171 S100171BL Alignment Bolt On SM/SMO14 Series S100171BL ACC. AC $ 16,507.00 25.0% 12,380.25$ No S100137-EL2 S100137MBL Alignment kit, bolt-on SM/SMO14-100 Series w/slip plates 215" WB
S100137MBL ACC. AC $ 7,265.00 25.0% 5,448.75$ No S100182 S100182BL Alignment kit, bolt-on SM18 w/SS steel radius gauges, slip plates 194" WB
S100182BL ACC. AC $ 11,073.00 25.0% 8,304.75$ No S100181 S100181BL Alignment kit, bolt-on SM18-EL2 w/SS steel radius gauges, slip plates 230" WB
S100181BL ACC. AC $ 11,256.00 25.0% 8,442.00$ No FA5501-1 FA5501-1BL
Alignment kit, Smart Lift DOR style lift. Kit consists of Bolt- on Kit, front turning Stainless Steel Radius Gauge Kit, rear slip plate kit, leveling legs, and all necessary hardware (drilling and tapping required). Recommended for use
with (2) Rolling Jacks for performing 4-Wheel Alignment.
FC7117 kit.
FA5501-1 ACC. AC $ 7,877.00
25.0% 5,907.75$ No
FC7125 FC7125BL
A Wheel Alignment w/ Rollback Conversion Package For
SM30 Series Lifts Including: (1) FC5394 Heavy Duty Carbon Steel Turntables (Pair) And Guides; (2) Front/Rear
Rollback Plates; (1) FC5395 Heavy Duty Bolt On Work Step Kit; Recoil Hose; Necessary Hardware And Instructions.
(Drilling Required.)
FC7125BL ACC. AC $ 11,517.00
25.0% 8,637.75$ No
FC7117 Kit PK304FC7117Y Filler adapter kit, alignment rack PK304FC711 ACC. AC $ 95.00 25.0% 71.25$ Yes EXHIBIT 1
R1070 Pro CCD RWA7080WS 8-CCD sensor wheel alignment with infra-red transmission among measuring heads RWA7080 CHANGER/BAL/ALIGNERS WS $ 24,906.00 41.0% 14,694.54$ No R1085 RWA3D1085 Portable 3D Wheel Aligner System RWA1085 CHANGER/BAL/ALIGNERS WS $ 33,702.00 41.0% 19,884.18$ No R1090 RWA3D1090 Portable 3D Wheel Aligner System RWA1090 CHANGER/BAL/ALIGNERS WS $ 41,474.00 41.0% 24,469.66$ No R5000HD CTAPRO RWA8060TWS Commercial Truck Aligner RWA8060TWS CHANGER/BAL/ALIGNERS WS $ 54,671.00 41.0% 32,255.89$ No STDA117 STDA117 Set of two sensor support kits for model R1080 STDA117 ACCS WA $ 493.00 25.0% 369.75$ No XA14 XA14N0110BL
Surface mounted lift, 14,000 lb alignment, 198" max
wheel base, air locking rear slip-plates, jacks and internal air included.
0 0 0.00 $ 57,141.00
41.0% 33,713.19$ NO
XA14-FM XA14N0111BL
Flush mount lift, 14,000 lb alignment, 198" max wheel
base, air locking rear slip-plates, jacks and internal air included.
0 0 0.00 $ 57,141.00
41.0% 33,713.19$ No
Z100006 Z100006BL Ramps, rear, extended (add $160 when ordering with lift in place of standard ramps). Z100006BL ACC. AC $ 1,507.00 25.0% 1,130.25$ Yes Z100007 Z100007BL Ramps, rear, flush (add $160 when ordering with lift in plac Z100007BL ACC. AC $ 1,507.00 25.0% 1,130.25$ Yes Z100008 Z100008BL Ramps, front, standard drive thru, 54" Z100008BL ACC. AC $ 1,479.00 25.0% 1,109.25$ Yes Z100009 Z100009BL Ramps, front, extended drive thru, 70" Z100009BL ACC. AC $ 1,538.00 25.0% 1,153.50$ Yes Z100010 Z100010BL Ramps, flush front drive thru Z100010BL ACC. AC $ 1,538.00 25.0% 1,153.50$ Yes Z100011 Z100011BL Slip plate refurbish kit, rear Z100011BL PARTS AP $ 2,652.00 25.0% 1,989.00$ Yes Z100012 Z100012BK Shim kit, 2 1/4" total Z100012BK ACC. AC $ 702.00 25.0% 526.50$ Yes Z100013 Z100013BK Shim kit, 2" total Z100013BK ACC. AC $ 702.00 25.0% 526.50$ Yes Z100014 Z100014 Slip plate base kit, rear, SS Z100014 ACC. AC $ 7,042.00 25.0% 5,281.50$ Yes Z100017 Z100017KITYL Hose relocate kit Z100017KIT ACC. AC $ 771.00 25.0% 578.25$ Yes Z100020 Z100020BK Spacer tool Z100020BK ACC. AC $ 210.00 25.0% 157.50$ Yes FA5157 FA5157KIT Radius gauge, carbon steel QTY OF ONE FA5157 ACC. AC $ 1,366.00 25.0% 1,024.50$ Yes Z100022 Z100022BL Radius gauge filler kit, Y-Lift Z100022BL ACC. AC $ 635.00 25.0% 476.25$ Yes RLP77 RLP77N0000MBL Lift, double scissor Fixed Pad. Available in colors of blue, re RLP77 LIGHT DUTY LS $ 24,901.00 41.0% 14,691.59$ No XX100018 XX100018 Hose kit 4.5' extension (1.5mm). XX100018 ACC. AC $ 218.00 25.0% 163.50$ No XX100019 XX100019 Hose kit 8' extension (2.5mm). XX100019 ACC. AC $ 259.00 25.0% 194.25$ No XX100032 XX100032YL Long Ramp Kit XX100032YL ACC. AC $ 2,113.00 25.0% 1,584.75$ No XX100003BK XX100003BK Flush mount kit. XX100003BK ACC. AC $ 957.00 25.0% 717.75$ No VLXS10 VLXS10000BL Lift, 10,000 lb fixed pad low rise 0 0 0.00 $ 9,478.00 41.0% 5,592.02$ No N257KITYL N257KITYL Arm kit, TL07-200/400 Series to flip-up style N257 ACC. AC $ 2,964.00 25.0% 2,223.00$ Yes N2206YL N2206YL Arm kit, TL07-500 Series to flip-up style N2206 ACC. AC $ 2,964.00 25.0% 2,223.00$ Yes FJ5123YL FJ5123YL Rail Bolster Kit for SPO9-200/400 Series, 7000 lbs FJ5123 ACC. AC $ 8,538.00 25.0% 6,403.50$ Yes FJ5204YL FJ5204YL Rail Bolster Kit for SPO10-500 Series and about, 7000 lbs FJ5204 ACC. AC $ 8,538.00 25.0% 6,403.50$ Yes MW-200 MW-200 Wheel lift, 200 lbs air operated. Includes air hose and auxiliary air tool connection. MW-200 ACC. AC $ 3,556.00 25.0% 2,667.00$ No MW-500 MW-500 Wheel lift, 500 lbs air operated. Includes air hose and auxiliary air tool connection. MW-500 ACC. AC $ 5,873.00 25.0% 4,404.75$ No FA5310 FA5310
Crossbeam Kit, Movable Pad Lifts. Kit comes with (2)
FA5306 Aluminum Crossbeams, (4) FJ2427E 1 1/2" and (4)
FJ2428E 3" Rubber Pad Adapters and (4) FJ6211BK 7"
Extended Height Adapters.
FA5310 ACC. AC $ 3,638.00
25.0% 2,728.50$ No
FJ2498 FJ2498 Adapter kit, polymer pad, 1/2" . Includes (4) SB700071Yspacer blocks. FJ2498 ACC. AC $ 106.00 25.0% 79.50$ Yes FJ2439 FJ2439 Adapter kit, polymer pad, 1 1/2". (Kit Includes (4) FJ2427E Adapters.) FJ2439 ACC. AC $ 138.00 25.0% 103.50$ Yes FJ2440 FJ2440 Adapter kit, polymer pad, 3". Includes (4) FJ2428E spacer blocks. FJ2440 ACC. AC $ 197.00 25.0% 147.75$ Yes S100046 S100046BK Power unit bracket to move power unit to front of column S100046 ACC. AC $ 69.00 25.0% 51.75$ Yes S100130MBL S100130MBL Alignment bolt-on kit, RFP14-100 series S100130MBL ACC. AC $ 12,875.00 25.0% 9,656.25$ No S100150YBL S100150YBL Ramps, drive-thru, RFP14 S100150YBL ACC. AC $ 1,069.00 25.0% 801.75$ Yes SH4D-5555 SH4D-5555 Drip tray, RFP9, (4) required for complete coverage SH4D-5555 ACC. AC $ 49.00 25.0% 36.75$ Yes SH4D-6000G SH4D-6000G Ramp, drive-thru, RFP9 SH4D-6000G ACC. AC $ 252.00 25.0% 189.00$ Yes SH4D-8050 SH4D-8050 Jack tray, RFP9 SH4D-8050 ACC. AC $ 328.00 25.0% 246.00$ Yes SH4D-9000 SH4D-9000 Solid deck flooring panel, RFP9, requires (8) per lift SH4D-9000 ACC. AC $ 256.00 25.0% 192.00$ Yes H4D-8000 H4D-8000 Solid deck flooring panel, RFP8, requires (8) per lift H4D-8000 ACC. AC $ 142.00 25.0% 106.50$ Yes EXHIBIT 1
TPB10-D1 TPB10-D1 Door Bumper Kit includes (2) PV-3005 bumpers and hardware TPB10-D1 ACC. AC $ 104.00 25.0% 78.00$ Yes T100285BK T100285BK Adapter kit, truck w/rack T100285BK ACC. AC $ 753.00 25.0% 564.75$ Yes FJ6257 FJ6257KIT
3-Stage or 2-Stage Adapter (2) for 2019 GM Trucks,
Revolution R10/RTP10 400 Series, Revolution R12/RTP12
300 Series
FJ6257KIT ACC. AC $ 976.00
25.0% 732.00$ Yes
RJ35BK RJ35BK Rolling jack, 3500 lb RJ35 ACC. AC $ 1,992.00 25.0% 1,494.00$ Yes RRJ45G RRJ45G Rolling jack, 4500 lb RRJ45G ACC. AC $ 2,810.00 25.0% 2,107.50$ Yes RRJ70GBK RRJ71GBK Rolling jack, 7000 lb RRJ71GM 0 DA $ 5,359.00 41.0% 3,161.81$ Yes M110108BK M110108BK Cart, fore and aft frame lifting kit for storage and moving. M110108BK ACC. AC $ 1,674.00 25.0% 1,255.50$ Yes M140148BK M140148BK Light, 24VDC LED service lamp kit (2 rectangular lamps), MCH13 M140148BK ACC. AC $ 1,541.00 25.0% 1,155.75$ Yes M140014 M140014 Service Chip for standard MCH’s ONLY (required to program MCH's). M140014 ACC. AC $ 89.00 25.0% 66.75$ Yes M120304BK M120304BK Large wheel adapter (per column). Raises vehicle for greater access by lift forks. M120304BK ACC. AC $ 255.00 25.0% 191.25$ Yes M140107 M140107 Analog Weight gauge for MCH13. M140107 ACC. AC $ 355.00 25.0% 266.25$ Yes M140150 M140150BK Pallet Jack Assembly for a MCH Column. Black only. Will fit 13k-19k columns. M140150BK ACC. AC $ 694.00 25.0% 520.50$ Yes SL210-MP8 SL210N8X0BL
Lift, 8000 lb SmartLift w/moveable pads Includes (4) 3" FJ2428E, (4) 1-1/2" FJ2427E spacer blocks and the
FJ2487E rubber pad kit.
SL210 LIGHT DUTY PL $ 20,319.00
41.0% 11,988.21$ Yes
SL210-FA SL210N10G0BL Lift, 10,000 lb SmartLift w/flip-up adapters SL210 0 0.00 $ 20,319.00 41.0% 11,988.21$ Yes SL210-RA SL210N10G0BL Lift, 10,000 lb SmartLift w/rubber adapters (To use with framed vehicles, also order T100273.) SL210 LIGHT DUTY PL $ 20,319.00 41.0% 11,988.21$ Yes SL210-TA SL210N10T0BL Lift, 10,000 lb SmartLift w/truck adapters Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions. SL210 LIGHT DUTY PL $ 20,319.00
41.0% 11,988.21$ Yes
SL212-TA SL212N1010BL Lift, 12,000 lb SmartLift w/truck adapters Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions. SL212 LIGHT DUTY PL $ 26,262.00
41.0% 15,494.58$ Yes
SL210i-MP8 SL210IN8X0BL Lift, 8000 lb SmartLift w/moveable pads, inbay SL210I LIGHT DUTY PL $ 21,162.00 41.0% 12,485.58$ Yes SL210i-FA SL210IN1000BL Lift, 10,000 lb SmartLift w/flip-up adapters, inbay SL210I LIGHT DUTY PL $ 18,274.00 41.0% 10,781.66$ Yes SL210i-RA SL210IN10G0BL Lift, 10,000 lb SmartLift w/rubber adapters, inbay (To use with framed vehicles, also order T100273.)
SL210I LIGHT DUTY PL $ 21,162.00 41.0% 12,485.58$ Yes SL210i-TA SL210IN10T0BL
Lift, 10,000 lb SmartLift w/truck adapters, inbay Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661
extensions.
SL210I LIGHT DUTY PL $ 21,162.00
41.0% 12,485.58$ Yes
SL212i-TA SL212IN1010BL
Lift, 12,000 lb SmartLift w/truck adapters, inbay Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661
extensions.
SL212I LIGHT DUTY PL $ 27,151.00
41.0% 16,019.09$ Yes
T110577 T110577 Inbay parts box components. Includes power unit/inbay control box, hardware.
T110577 PARTS BP $ 7,035.00 25.0% 5,276.25$ Yes SL210-MP8SW SL210U8X0BL
Lift, 8000 lb SmartLift w/movable pads, SW Includes (4) 3" FJ2428E, (4) 1-1/2" FJ2427E spacer blocks and the
FJ2487E rubber pad kit.
SL210 0 0.00 $ 23,729.00
41.0% 14,000.11$ Yes
SL210-FASW SL210U1000BL Lift, 10,000 lb SmartLift w/TRIO flip-up adapters, SW SL210 0 0.00 $ 23,729.00 41.0% 14,000.11$ Yes SL210-RASW SL210U10G0BL Lift, 10,000 lb SmartLift w/TRIO rubber adapters, SW (To use with framed vehicles, also order T100273.)
SL210 0 0.00 $ 23,729.00 41.0% 14,000 Yes SL210-TASW SL210U10T0BL
Lift, 10,000 lb SmartLift w/TRIO truck adapters, SW
Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL210 0 0.00 $ 23,729.00
41.0% 14,000.11$ Yes
SL212-TASW SL212U1110BL
Lift, 12,000 lb SmartLift w/TRIO truck adapters, SW
Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL212 0 0.00 $ 29,329.00
41.0% 17,304.110$ Yes
T110555 T110555BK
Shockwave Inground Portion Only For Split SL Orders --
Both Conventional and LDS (Liquid Detection System)
Versions. LDS on workbench only.
T110555BK LIGHT DUTY PL $ 14,680.00
41.0% 8,661.20$ Yes
EXHIBIT 1
SL210-MP8SW finish SL210U8X0FBL
Finish kit, 8000 lb SmartLift w/movable pads, SW, Includes (4) 1 1/2" FJ2427E spacer blocks, (4) 3" FJ2428E spacer blocks and mounting hardware. Also includes FJ2487E
rubber pad kit.
SL210 0 0.00 $ 9,049.00
41.0% 5,338.91$ Yes
SL210-FASW finish SL210U1000FBL Finish kit, 10,000 lb SmartLift w/TRIO flip-up adapters, SW SL210 0 0.00 $ 9,049.00 41.0% 5,338.91$ Yes SL210-RASW finish SL210U10G0FBL Finish kit, 10,000 lb SmartLift w/TRIO rubber adapters, SW (To use with framed vehicles, also order T100273.)
SL210 0 0.00 $ 9,049.00 41.0% 5,338.91$ Yes SL210-TASW finish SL210U10T0FBL
Finish kit, 10,000 lb SmartLift w/TRIO truck adapters, SW, Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL210 0 0.00 $ 9,049.00
41.0% 5,338.91$ Yes
T100275 T100275BK
Completion kit, SL210 and SL212 SW, Contains 8 1/2"
plungers, equalizers, guide barrels, cylinders, hoses, lock components and hardware. To make a complete lift also
requires a future/relocation kit (T110177) and a finish kit.
No power unit included.
T100275BK LIGHT DUTY PL $ 11,891.00
41.0% 7,015.69$ Yes
T100276 T100276BK Retrofit kit, SW for SL210 500 series and above, arm style T100276 ACC. AC $ 8,082.00 25.0% 6,061.50$ No T100277 T100277BK Retrofit kit, SW for SmartLifts, moveable pad style T100277 ACC. AC $ 8,082.00 25.0% 6,061.50$ No T100281 T100281BK Retrofit kit, SW bench controls for SmartLifts, arm style T100281BK ACC. AC $ 9,666.00 25.0% 7,249.50$ No T100282 T100282BK Retrofit kit, SW bench controls for SmartLifts, moveable pad style
T100282BK ACC. AC $ 9,666.00 25.0% 7,249.50$ No T100290BK T100290BK Conversion kit, SL210 Shockwave bench control T100290BK ACC. AC $ 7,497.00 25.0% 5,622.75$ Yes T100291BK T100291BK Conversion kit, SL212 Shockwave bench control T100291BK ACC. AC $ 7,497.00 25.0% 5,622.75$ Yes T110606 T110606BK Pedestal kit, SmartLift DC Control (no cost if ordered with lift)
T110606BK ACC. AC $ 361.00 25.0% 270.75$ No FJ864BK FJ864BK Power unit stand, low rise lifts FJ864 ACC. AC $ 190.00 25.0% 142.50$ No T110280BK T110280BK Power unit stand, SmartLift, 1 phase T110280 ACC. AC $ 361.00 25.0% 270.75$ No T110165BK T110165BK Power unit stand, 3 phase One Touch controls -- no cost when ordering a lift
T110165 ACC. AC $ 489.00 25.0% 366.75$ Yes T110425 T110425BK Inground Portion Only For Split SL Orders, Conventional and LDS
T110425 LIGHT DUTY PL $ 14,273.00 41.0% 8,421.07$ Yes SL210-MP8 finish SL210N8X0FBL
Finish kit, 8000 lb SmartLift w/movable pads, Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer
blocks, mounting hardware.
SL210F LIGHT DUTY PL $ 6,046.00
41.0% 3,567.14$ Yes
SL210-RA finish SL210N10G0FBL Finish kit, 10,000 lb SmartLift w/TRIO rubber adapters (To use with framed vehicles, also order T100273.)
SL210F LIGHT DUTY PL $ 6,046.00 41.0% 3,567.14$ Yes SL210-TA finish SL210N10T0FBL
Finish kit, 10,000 lb SmartLift w/TRIO truck adapters
Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL210F LIGHT DUTY PL $ 6,046.00
41.0% 3,567.14$ Yes
SL212-TA finish SL212N1010FBL
Finish kit 12,000 lb SmartLift w/TRIO truck adapters
Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL212F LIGHT DUTY PL $ 11,652.00
41.0% 6,874.68$ Yes
SL210i-MP8 finish SL210IN8X0FBL
Finish kit, 8000 lb SmartLift w/movable pads, inbay,
Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer blocks, mounting hardware and liquid detection
system.
SL210IF LIGHT DUTY PL $ 6,889.00
41.0% 4,064.51$ Yes
SL210i-FA finish SL210IN1000FBL Finish kit, 10,000 lb SmartLift w/TRIO flip-up adapters, inbay
SL210IF LIGHT DUTY PL $ 5,949.00 41.0% 3,509.91$ Yes SL210i-RA finish SL210IN10G0FBL Finish kit, 10,000 lb SmartLift w/TRIO rubber adapters, inbay (To use with framed vehicles, also order T100273.) SL210IF LIGHT DUTY PL $ 6,889.00
41.0% 4,064.51$ Yes
SL210i-TA finish SL210IN10T0FBL
Finish kit, 10,000 lb SmartLift w/TRIO truck adapters,
inbay Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL210IF LIGHT DUTY PL $ 6,889.00
41.0% 4,064.51$ Yes
SL212i-TA finish SL212IN1010FBL
Finish kit 12,000 lb SmartLift w/TRIO truck adapters, inbay Includes (4) 3 1/2" T130660 extensions and (4) 5" T130661 extensions.
SL212IF LIGHT DUTY PL $ 12,776.00
41.0% 7,537.84$ Yes
T100249 T100249BK
Superstructure kit, Moveable-pad for Smart lifts with 8 1/2" piston diameter, Includes (4) FJ2427E 1-1/2" spacer blocks, (4) FJ2428E 3" spacer blocks, spotting dish, relief valve and mounting hardware.
T100249 ACC. AC $ 4,980.00
25.0% 3,735.00$ No
EXHIBIT 1
T100270 T100270BK
Superstructure kit, TRIO FA SL210-400 series and above, Includes adapters, spotting dish, arm pins and mounting hardware.
T100270BK ACC. AC $ 4,980.00
25.0% 3,735.00$ Yes
T100268 T100268BK
Superstructure kit, TRIO RA SL210-400 series and above, Includes adapters, spotting dish, arm pins and mounting hardware.
T100268BK ACC. AC $ 4,980.00
25.0% 3,735.00$ No
T100269 T100269BK
Superstructure kit, TRIO TA SL210-400 series and above, Includes adapters, spotting dish, arm pins and mounting hardware.
T100269BK ACC. AC $ 4,980.00
25.0% 3,735.00$ No
T100107 T100107BK Superstructure kit, SL212, Includes adapters, spotting dish, arm pins and mounting hardware. T100107BK ACC. AC $ 6,920.00 25.0% 5,190.00$ No T100210 T100210BK
Superstructure kit, 3-stage SL29-300 series and below,
Includes adapters, spotting dish, arm pins and mounting hardware.
T100210BK ACC. AC $ 4,909.00
25.0% 3,681.75$ Yes
T110177 T110177BK Future kit, SL210/212 500 series and later T110177 LIGHT DUTY LP $ 7,360.00 41.0% 4,342.40$ Yes T100094 T100094BK Completion Kit for 6” plunger for T110126 Relocation Kit.
Does not include superstructure. T100094 LIGHT DUTY LL $ 12,031.00 41.0% 7,098.29$ Yes T100035 T100035BK
Superstructure kit for 6” plunger completion kits, includes 2 Yokes, 4 Swinging Arms, 4 Swivel Three-Position Frame Contact Adapters, Wheel Dish and Yoke Bolts.
T100035 ACC. AC $ 3,532.00
25.0% 2,649.00$ Yes
T100239 T100239BK
Completion kit, SL210, SL210i, SL212 and SL212i for
T110177 future kit. Contains 8 1/2” plungers, equalizers, guide barrels, cylinders, hoses, lock compoents, and
hardware. To make a complete lift this kit also requires a future/relocation kit and a finish/kit. No power unit
included.
T100239 LIGHT DUTY LP $ 8,586.00
41.0% 5,065.74$ Yes
T110270 T110270BK Gasket and cover kit for 400 SL Models. No charge when ordering with completion kit
T110270BK ACC. AC $ 850.00 25.0% 637.50$ Yes T100236 T100236BK Inbay liquid detection system - Conversion Kit for SL210, SL212 and SL29
T100236 ACC. AC $ 2,695.00 25.0% 2,021.25$ Yes T100011 Hose Kit T100011 Hose kit, pre-cut 25' hydraulic hose, air regulator T100011 ACC. AC $ 503.00 25.0% 377.25$ Yes T140072 T140072 Grease, Mobil 1 SHC1500 12.5 oz. cartridge T140072 ACC. AC $ 46.00 25.0% 34.50$ Yes FA5700 FA5700 Light kit, LED, Four 48" wands w/magnetic clips FA5700 ACC. AC $ 1,665.00 25.0% 1,248.75$ No FA5701 FA5701 Light kit, Two 32" wands w/magnetic clips FA5701 ACC. AC $ 991.00 25.0% 743.25$ No FA5702 FA5702 Light, Rechargeable LED handheld FA5702 ACC. AC $ 275.00 25.0% 206.25$ No FA7815 FA7815 Retrofit kit, Spotline™ laser spotting FA7815 ACC. AC $ 1,095.00 25.0% 821.25$ No FA834-KIT FA834-KIT
Locklight kit, 110 volt. Comes with indicator light
assembly, pressure switch, mounting bracket and 10’ of
electrical wire. 110V AC.
FA834-KIT ACC. AC $ 691.00
25.0% 518.25$ No
FA835-KIT FA835-KIT
Locklight kit, 220 volt. Comes with indicator light
assembly, pressure switch, mounting bracket and 10’ of
electrical wire. 220V AC.
FA835-KIT ACC. AC $ 691.00
25.0% 518.25$ No
FJ6115BK FJ6115BK
Adapter kit, extended height w/rack. 2,500 lb capacity maximum per adapter. Includes (4) FJ696 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114.
FJ6115 ACC. AC $ 723.00
25.0% 542.25$ No
FJ6212KITYL FJ6212KITYL
Adapter kit, extended height w/rack. 2,500 lb. capacity per adapter. Kit includes a set of (4) FJ6212 adapters and 2 piece column or wall mounted adapter rack FJ6114.
FJ6212 ACC. AC $ 648.00
25.0% 486.00$ No
FJ6195YL FJ6195YL Adapter kit, extended height. 2,500 lb capacity per adapter. Includes a set of (2) FJ6196 adapters.
FJ6195 ACC. AC $ 483.00 25.0% 362.25$ No FJ6133BK FJ6133BK
Adapter kit, extended height w/rack. 2,500 lb maximum
capacity per adapter. Includes (4) FJ6101 Adapters and 2 Piece Column or Wall-Mounted Adapter Rack FJ6114.
FJ6133 ACC. AC $ 764.00
25.0% 573.00$ No
FJ6137BK FJ6137BK
Adapter kit, extended height polymer w/rack. Includes
(4) FJ7858 Adapters and 2 Piece Column or Wall-
Mounted Adapter Rack FJ6114.
FJ6137 ACC. AC $ 835.00
25.0% 626.25$ No
EXHIBIT 1
FJ6138BK FJ6138BK
Adapter kit, 1/2" polymer w/rack. Includes (4) FJ697
Adapters, 2 Piece Column or Wall-Mounted Adapter Rack
FJ6142.
FJ6138 ACC. AC $ 446.00
25.0% 334.50$ No
FJ6190YL FJ6190YL
Adapter kit, 1" polymer w/rack. Includes (4) FJ6189
Adapters, 2 Piece Column or Wall-Mounted Adapter Rack
FJ6142.
FJ6190 ACC. AC $ 469.00
25.0% 351.75$ No
FJ6139BK FJ6139BK
Adapter kit, 2.5" polymer w/rack. Includes (4) FJ698
Adapters, 2 Piece Column or Wall-Mounted Adapter Rack
FJ6142.
FJ6139 ACC. AC $ 469.00
25.0% 351.75$ No
FJ6100BK FJ6100BK
Adapter kit w/rack. Includes (4) FJ696, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter
Organizer Rack Part #FJ6108.
FJ6100 ACC. AC $ 1,407.00
25.0% 1,055.25$ No
FJ6104BK FJ6104BK
Adapter kit w/rack. Includes (4) FJ6101, (4) FJ697 And (4) FJ698 Plus 2 Piece Column or Wall-Mounted Adapter
Organizer Rack Part #FJ6108.
FJ6104 ACC. AC $ 1,456.00
25.0% 1,092.00$ No
FJ6105BK FJ6105BK
Adapter kit w/rack. Includes (2) FJ696, (2) FJ6101, (4) FJ697, (4) FJ698 Plus 2 Piece Column or Wall-Mounted
Adapter Organizer Rack Part #FJ6108.
FJ6105 ACC. AC $ 1,438.00
25.0% 1,078.50$ No
FJ6117BK FJ6117BK
Adapter kit w/rack. Includes (4) FJ7858, (4) FJ697, (4) FJ698 Plus 2 Piece Column Adapter Organizer Rack Part
#FJ6108.
FJ6117 ACC. AC $ 1,480.00
25.0% 1,110.00$ No
FJ6197 FJ6197 Adapter kit, (4) FJ6214, 3-stage arms FJ6197 ACC. AC $ 736.00 25.0% 552.00$ Yes FJ6225 FJ6225 Adapter kit, (4) FJ6202, 3-stage arms FJ6225 ACC. AC $ 736.00 25.0% 552.00$ No FJ71015-1kit FJ71015-1kit Passenger Vehicle Adapter kit, (4) low profile adapters for SPO16, CAPACITY 2,750 lbs. each FJ71015-1K ACC. AC $ 915.00 25.0% 686.25$ No FJ71016-1kit FJ71016-1kit Passenger Vehicle Adapter kit, (4) low profile adapters for SPO20, CAPACITY 2,750 lbs. each FJ71016-1K ACC. AC $ 915.00 25.0% 686.25$ No FJ7880BK FJ7880BBK
Adapter kit, stackable pins w/rack, 3-stage arms. Includes four (4) FJ6171-1 (3.5" tall extension), four (4) FJ6171-2 (5" tall extension) and FJ6127 rack kit with mounting
hardware.
FJ7880BBK ACC. AC $ 557.00
25.0% 417.75$ Yes
FJ6200 FJ6200 Adapter kit, (4) FJ6201, SPO12-10, 300-500 FJ6200 ACC. AC $ 937.00 25.0% 702.75$ No FJ6258 FJ6258KIT
3-Stage Adapter (2) for 2019 GM Trucks, SPO10/SPOA10-
RA/TA with 3-Stage arms, SPO12/500-700 Series, SL210-
RA/TA with 3-Stage Arms, SL212/1000 Series
FJ6258KIT ACC. AC $ 976.00
25.0% 732.00$ No
FJ6259 FJ6259KIT Flip-up Adapter for 2019 GM Trucks, SPOA10/SPO10, SL210-FA, any Rotary lifts with flip adapters
FJ6259KIT ACC. AC $ 1,778.00 25.0% 1,333.50$ No T100271 T100271BK
Adapter kit, stackable pins for TRIO w/rack. Includes four (4) T130660 (3.5" tall extension) and four (4) T130661 (5" tall extension) and (2) T130683 rack kit with mounting
hardware.
T100271BK ACC. AC $ 570.00
25.0% 427.50$ No
T100272 T100272 Adapter kit, round rubber for the TRIO Superstructure.
Includes four (4) FJ6219 adapters.
T100272 ACC. AC $ 753.00 25.0% 564.75$ No T100273 T100273 Adapter kit, truck for TRIO Superstructure. Includes four (4) T110564 adapters.
T100273 ACC. AC $ 753.00 25.0% 564.75$ No T100274 T100274 Adapter kit, Flip-up for TRIO Superstructure (except SL212). Includes components for four (4) arms.
T100274 ACC. AC $ 753.00 25.0% 564.75$ No N539 N539 Column base cover plate, SPOA7/A9 -200 plus, SPOA10 N539 ACC. AC $ 92.00 25.0% 69.00$ No FA5911BK FA5911BK Air/Electric utility box w/FRL, 2-post lifts FA5911 ACC. AC $ 995.00 25.0% 746.25$ No FA5910BK FA5910BK Air/Electric utility box, 2-post lifts FA5910 ACC. AC $ 626.00 25.0% 469.50$ No FA915 FA915 Air/Electric utility box w/FRL, 4-post lifts FA915 ACC. AC $ 996.00 25.0% 747.00$ No FA916KIT FA916KIT Air/Electric utility box, 4-post lifts FA916 ACC. AC $ 621.00 25.0% 465.75$ No FA2259BK FA2259BK Air/Electric utility box w/FRL, SM30 FA2259 ACC. AC $ 996.00 25.0% 747.00$ No FA2260BK FA2260BK Air/Electric utility box, SM30 FA2260 ACC. AC $ 650.00 25.0% 487.50$ No FA5202 FA5202 Air/Electric utility box, dual w/FRL, 1.6 inbay only FA5202 ACC. AC $ 1,681.00 25.0% 1,260.75$ No FA5112 FA5112 Shim plate kit, 3/4" total, 2-post & SMO123 front FA5112 ACC. AC $ 354.00 25.0% 265.50$ No FA5221 FA5221 Shim plate kit, 3/4" total, AT07 FA5221 ACC. AC $ 296.00 25.0% 222.00$ Yes FA7118 FA7118BK Overhead Cutoff Switch Assembly, 1 phase FA7118 ACC. AC $ 557.00 25.0% 417.75$ Yes FA7385 FA7385BK Overhead Cutoff Switch Assembly, 3 phase FA7385BK ACC. AC $ 683.00 25.0% 512.25$ Yes EXHIBIT 1
N823 N823 Door Defender. Includes 1 Door Defender, adhesive to attach to the lift and instructions. N823 ACC. AC $ 212.00 25.0% 159.00$ Yes FA5191E FA5191EBK Tool Holder FA5191EBK ACC. AC $ 164.00 25.0% 123.00$ No FA5974 FA5974
WheelWingTM kit. Includes (set of 2) 2 dishes, shims,
adjustable to fit various lifts. 100 lb. capacity per
WheelWingTM.
FA5974 ACC. AC $ 402.00
25.0% 301.50$ No
FA5900BK FA5900BK
WheelWing 2 Post Column Mounting Kit. Mount Wheel
Wing on Column Instead of Front Arm on Asymmetrical
Lifts.
FA5900BK ACC. AC $ 63.00
25.0% 47.25$ No
LP20041 LP20041 Warranty, extended 3 year parts for light duty LP20041 ACC. AC $ 244.00 25.0% 183.00$ Yes SV0060 SV0060 Warranty, extended 2 year parts for Parallelogram, HDC, VR, VREX SV0060 ACC. AC $ 4,073.00 25.0% 3,054.75$ Yes SV0061 SV0061 Warranty, extended 4 year parts for Parallelogram, HDC, VR, VREX SV0061 ACC. AC $ 8,145.00 25.0% 6,108.75$ Yes SV0062 SV0062 Warranty, extended 2 year parts for Mobile Columns, per p SV0062 ACC. AC $ 408.00 25.0% 306.00$ Yes SV0063 SV0063 Warranty, extended 4 year parts for Mobile Columns, per pair SV0063 ACC. AC $ 816.00 25.0% 612.00$ Yes FA845-MCH FA845-MCH-KIT Additional remote control for Flex lifts. Includes charger an FA845-MCH- ACC. AC $ 2,633.00 25.0% 1,974.75$ No FLEX MAX™ 214 MCHM214U100BKYL 14k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote MCHM214 MOBILE COLUMN M3 $ 39,352.00
41.0% 23,217.68$ No
FLEX MAX™ 414 MCHM414U100BKYL 14k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote MCHM414 MOBILE COLUMN M3 $ 76,561.00
41.0% 45,170.99$ No
FLEX MAX™ 614 MCHM614U100BKYL 14k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote MCHM614 MOBILE COLUMN M3 $ 115,911.00
41.0% 68,387.49$ No
FLEX MAX™ 814 MCHM814U100BKYL 14k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote MCHM814 MOBILE COLUMN M3 $ 153,121.00
41.0% 90,341.39$ No
FLEX MAX™ 219 MCHM219U100BK 18.8k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote. MCHM219 MOBILE COLUMN M8 $ 48,913.00
41.0% 28,858.67$ Yes
FLEX MAX™ 419 MCHM419U100BK 18.8k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote. MCHM419 MOBILE COLUMN M8 $ 89,035.00
41.0% 52,530.65$ Yes
FLEX MAX™ 619 MCHM619U100BK 18.8k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote. MCHM619 MOBILE COLUMN M8 $ 134,796.00
41.0% 79,529.64$ Yes
FLEX MAX™ 819 MCHM819U100BK 18.8k Lb. per column capacity portable lift. Same system as FLEX™ but upgraded operation at column and remote. MCHM819 MOBILE COLUMN M8 $ 178,067.00
41.0% 105,059.53$ Yes
MCHW218 MCHW218U100RD
18K Lb. Per Column Capacity Portable Lift. Electro-
Hydraulic System with Adjustable Forks. 24VDC Battery
Operated with 110 V Charging System. Sold in Groups of 2 with Wireless Communication.
MCHW218 MOBILE COLUMN M8 $ 44,204.00
41.0% 26,080.36$ Yes
MCHW418 MCHW418U100RD
18K Lb. Per Column Capacity Portable Lift. Electro-
Hydraulic System with Adjustable Forks. 24VDC Battery
Operated with 110 V Charging System. Sold in Groups of 4 with Wireless Communication.
MCHW418 MOBILE COLUMN M8 $ 88,405.00
41.0% 52,158.95$ Yes
MCHW618 MCHW618U100RD
18K Lb. Per Column Capacity Portable Lift. Electro-
Hydraulic System with Adjustable Forks. 24VDC Battery
Operated with 110 V Charging System. Sold in Groups of 6 with Wireless Communication.
MCHW618 MOBILE COLUMN M8 $ 132,608.00
41.0% 78,238.72$ Yes
FA8137 FA8137
Upgrade a single FLEX™ Column with new display
membrane to a FLEX MAX™ - Additional board and
remote software update included. Programming remote
requires Rotary Tool laptop programmer. This is for older FLEX units without a group button.
FA8137 PARTS BP $ 883.00
25.0% 662.25$ No
EXHIBIT 1
FA8136 FA8136
Upgrade a single FLEX™ Column without new display
membrane to a FLEX MAX™ - Additional board and
remote software update included. Programming remote
requires Rotary Tool laptop programmer.
FA8136 PARTS BP $ 883.00
25.0% 662.25$ No
M140112 M140112 Locklight™ MCH kit compatible/retrofittable with DC versions of MCH13 and MCH18 columns.
M140112 ACC. AC $ 811.00 25.0% 608.25$ No M140115 M140115
Locklight™ MCH kit for AC mobile columns and MCH
columns with pressure gauges already installed.
Includes all parts for M140112 and necessary adapter
hoses/fitting.
M140115 ACC. AC $ 1,081.00
25.0% 810.75$ No
ML41YL ML41YL
Saddle Cross Beam With Two (2) Support Blocks For
Frame Pick-Up. For HP, MCH18 and Flex Models ONLY.
32,000 lbs Capacity at 72” adapter spread. 24,000 lbs.
Capacity at 49” adapter spread.
ML41 ACC. AC $ 3,903.00
25.0% 2,927.25$ No
M140070YL M140070YL
Low Profile Cross Beam With Two (2) Support Blocks For
Frame Pick-Up. For HP, MCH18 and Flex Models ONLY.
30,000 lbs Capacity at 49” adapter spread. 21,000 lbs.
Capacity at 25” adapter spread.
M140070YL ACC. AC $ 8,796.00
25.0% 6,597.00$ No
FD2353KITYL FD2353KITYL
Ramp style cross beam with (2) ramps for RV pick-up.
Capacity 22,000 lbs. For HP, MCH18 and Flex Models
ONLY.
FD2353 ACC. AC $ 4,509.00
25.0% 3,381.75$ No
FD2448KITYL FD2448KITYL
Extra wide ramp style cross beam with (2) ramps for
WingPlows. Cap. 28,000 lbs. MCH18 and Flex 19 Models
ONLY.
FD2448KIT ACC. AC $ 8,609.00
25.0% 6,456.75$ No
M140004RD M140004RD
Forklift Ramp Kit used with the MCH418 series to utilize two MCH columns to service forklifts. Easily
attaches to the base of the column and provides
clearance needed to raise 4-wheeled forklifts with a
weight
of 10,000 lbs. (NOTE: Most 6,000 lb. capacity trucks weigh 10,000 lbs. or less; however, the truck weight
should be verified before being lifted.) For Drive-on/Back- off operation. For Class II Forklifts Only.
M140004RD ACC. AC $ 6,163.00
25.0% 4,622.25$ No
M140124RD M140124RD
Forklift Ramp Kit used with the MCH418 Flex 419 series to utilize two MCH columns to service forklifts. Easily
attaches to the base of the column and provides
clearance needed to raise 4-wheeled forklifts with a
weight of 18,000 lbs. (NOTE: Most 10,000 lb. capacity
trucks weigh 18,000 lbs. or less; however, the truck
weight should be verified before being lifted.) For Drive- on/Back-off operation.
M140124RD ACC. AC $ 6,163.00
25.0% 4,622.25$ No
M110175 M110175RD Forklift cart for easy mobility of Forklift kits. M110175RD ACC. AC $ 2,196.00 25.0% 1,647.00$ Yes M140012RD M140012RD Forklift Ramp Kit M140012 ACC. AC $ 6,163.00 25.0% 4,622.25$ Yes M140001RD M140001RD Long Fork Kit. Each kit includes two 22” forks (8” longer tha M140001RD ACC. AC $ 1,832.00 25.0% 1,374.00$ Yes M140041RD M140041RD
Long Fork Kit. Each kit includes two 20” forks (6” longer than standard) and two 8” leg extensions. Reduces
capacity of column to 14,500 lbs. FOR MCH and Flex
MODELS ONLY. 18,000/19,000 lb. columns only.
IMPROVED DESIGN. Price shown is for 1 column.
M140041RD ACC. AC $ 1,832.00
25.0% 1,374.00$ Yes
M140015RD M140015KITRD
Drive-on runway assembly for use with MCH418 and Flex
Mobile Columns. 60,000 lbs. capacity. Mac wheel base
33'. (MCH418+) RJ25001LBK can be used with these
runways. Includes airline kit.
M140015K ACC. AC $ 70,757.00
25.0% 53,067.75$ NO
M140129CG M140129CG
Drive-on runway assembly for use with MCH413 and Flex
Mobile Columns. 36,000 lbs. capacity. Length 30 feet.
(MCH413+) . Includes airline kit.
M140129CG ACC. AC $ 30,256.00
25.0% 22,692.00$ Yes
M140003 M140003 Pendant for MCH Mobile Column Lift System with 33’ cable.
M140003 ACC. AC $ 14,452.00 25.0% 10,839.00$ No M140144 M140144 Service Chip for FLEX columns only. M140144 PARTS BP $ 80.00 25.0% 60.00$ No AC100005 AC100005
Rotary programming tool for heavy duty lifts. Software for laptop running
Windows XP/7/8/10. (Laptop not included.)
AC100005 ACC. AC $ 1,814.00
25.0% 1,360.50$ NO
EXHIBIT 1
M140157 M140157RD Analog Gauge Kit for MCH/RCH Series M140157RD ACC. AC $ 604.00 25.0% 453.00$ Yes S100166 S100166BL
SM18 -- Bolt-On Alignment Kit converts SM18/SM18EL
lifts to alignment racks. Kits include stainless steel radius gauges, slip plates and ramp modifications and necessary mounting hardware. Rolling jacks are sold separately.
194" WB
S100166BL ACC. AC $ 11,073.00
25.0% 8,304.75$ No
S100128 S100128BL
SM18 -- Bolt-On Alignment Kit converts SM18/SM18EL
lifts to alignment racks. Kits include stainless steel radius gauges, slip plates and ramp modifications and necessary mounting hardware. Rolling jacks are sold separately.
230" WB
S100128BL ACC. AC $ 11,256.00
25.0% 8,442.00$ No
Moveable Jack-Non Recessed Moveable Jack-Non Recesse25,000lb Capacity 17" Frame 10.6" Piston 0 0 0.00 $ - 41.0% -$ Yes Moveable Jack-Recessed W/PocMoveable Jack-Recessed W/25,000lb Capacity 17" Frame 10.6" Piston Standard Cover Plates
0 0 0.00 $ - 41.0% -$ Yes Moveable Jack-Recessed W/Poc Moveable Jack-Recessed W/ 25,000lb Capacity 17" Frame 10.6" Piston Shutter Plates 0 0 0.00 $ - 41.0% -$ Yes Stationary Post 12,000lb Stationary Post 12,000lb 12,000lb Capacity 10.6" Single Piston 48" Pocket 0 0 0.00 $ - 41.0% -$ Yes Stationary Post 18,000lb Stationary Post 18,000lb 18,000lb Capacity 10.6" Single Piston 48" Pocket 0 0 0.00 $ - 41.0% -$ Yes Stationary Post 25,000lb Stationary Post 25,000lb 25,000lb Capacity 10.6" Single Piston 48" Pocket 0 0 0.00 $ - 41.0% -$ Yes Dual Jack Frame (Side by Side) Dual Jack Frame (Side by Sid50,000lb Capacity Dual 10.6" Pistons 48" Pocket 0 0 0.00 $ - 41.0% -$ Yes M140168YL M140168YL Fore and Aft Frame Kit M140168YL ACC. AC $ 5,692.00 25.0% 4,269.00$ Yes RS20SYL RS20SYL Screw Type Adjustable 56.1"-82.3" RS20SYL ACC. AC $ 1,829.00 25.0% 1,371.75$ No RS2052SYL RS2052SYL Screw Type Adjustable 34.3"-55.5" RS2052SYL ACC. AC $ 1,629.00 25.0% 1,221.75$ No RS20-VAYL RS20-VAYL
V Shaped Adapter for Rotary Jack Stand 15K to 20K (1) Per Stand
RS20-VAYL PARTS BP $ 189.00 25.0% 141.75$ No ARO22N000 ARO22N000BL 4 Post Alignment 22,000lb Capacity 194" Wheelbase 0 0 0.00 $ 70,143.00 41.0% 41,384.37$ Yes ARO22N000ZP ARO22N000ZPBL
4 Post Alignment 22,000lb Capacity 194" Wheelbase Zinc
Primed
0 0 0.00 $ 73,062.00 41.0% 43,106.58$ Yes ARO22N001 ARO22N001BL 4 Post Alignment 22,000lb Capacity 230" Wheelbase 0 0 0.00 $ 73,791.00 41.0% 43,536.69$ Yes ARO22N001ZP ARO22N001ZPBL
4 Post Alignment 22,000lb Capacity 230" Wheelbase Zinc
Primed
0 0 0.00 $ 76,710.00 41.0% 45,258.90$ Yes M140180YL M140180YL Cab Off Adapter for M140168 Fore and Aft Kit M140180YL ACC. AC $ 1,199.00 25.0% 899.25$ Yes M120651YL M120651YL Wide Center Adapter for Use With M140168YL ONLY M120651YL ACC. AC $ 315.00 25.0% 236.25$ Yes M140171BK M140171BK 24VDC LED Service Lamp Kit M140171BK ACC. AC $ 1,497.00 25.0% 1,122.75$ Yes M140181 M140181 Forklift Ramp Carriage M140181 ACC. AC $ 10,251.00 25.0% 7,688.25$ NO M140182 M140182 Forklift Ramp Carriage For Double or Triple Pallet Truck M140182 ACC. AC $ 10,331.00 25.0% 7,748.25$ No M140153RD M140153RD 3 Wheel Forklift Kit M140153RD ACC. AC $ 6,527.00 25.0% 4,895.25$ No RJ9100YM RJ9100YM 9,000lb Capacity Rolling Jack RJ9100YM ACC. AC $ 8,024.00 25.0% 6,018.00$ No RJ9100YM-1 RJ9100YM-1 9,000lb Capacity Rolling Jack SM181 Only Welded Tracks RJ9100YM-1 ACC. AC $ 6,929.00 25.0% 5,196.75$ No RJ9100YM-2 RJ9100YM-2 9,000lb Capacity Rolling Jack SM30 Series RJ9100YM-2 ACC. AC $ 7,691.00 25.0% 5,768.25$ No RJ15BK RJ15BK 15,000lb Capacity Rolling Jack for ARO22 RJ15BK ACC. AC $ 20,492.00 25.0% 15,369.00$ No RJ14BK RJ14BK 14,000lb Capacity Rolling Jack RJ14BK ACC. AC $ 23,809.00 25.0% 17,856.75$ Yes RJ30BK RJ30BK 30,000lb Capacity Rolling Jack RJ30BK ACC. AC $ 24,407.00 25.0% 18,305.25$ Yes M140099RD M140099RD Drive-Thru Ramp Kit for All HDC 50 and 60 Models. M140099RD ACC. AC $ 3,156.00 25.0% 2,367.00$ Yes M140133RD M140133RD Drive-Thru Ramp Kit for All HDC 36 Models. M140133RD ACC. AC $ 2,046.00 25.0% 1,534.50$ Yes M140111RD M140111RD HDC Column Mobility Kit. (Adds Wheels and Steering to HD M140111RD ACC. AC $ 5,873.00 25.0% 4,404.75$ Yes M140125RD M140125RD HDC Column Mobility Kit. (Adds Wheels and Steering to HD M140125RD ACC. AC $ 5,873.00 25.0% 4,404.75$ Yes M140105 M140105 2” Shim Kit for HDC 36K, 50K, or 60K lifts. Kit is sized for single column.
M140105 PARTS BP $ 1,909.00 25.0% 1,431.75$ Yes M140106 M140106 1” Shim Kit for HDC (Two 1/2, Two 1/4, Two 1/8, Two 1/16) 36K, 50K, or 60K lifts. Kit is sized for single column. M140106 PARTS BP $ 859.00
25.0% 644.25$ Yes
RJ22BK RJ22BK 22,000lb Rolling Jack RJ22BK ACC. AC $ 25,058.00 25.0% 18,793.50$ NO RJ25BK RJ25BK 25,000lb Rolling Jack RJ25BK ACC. AC $ 25,058.00 25.0% 18,793.50$ No RJ32BK RJ32BK 32,000lb Rolling Jack RJ32BK ACC. AC $ 25,439.00 25.0% 19,079.25$ No RJ42BK RJ42BK 42,000lb Rolling Jack RJ42BK ACC. AC $ 26,127.00 25.0% 19,595.25$ Yes MOD35M-10 MOD35M-10 Modular Movable Jack Unit With 10’ Long Track. Use for Ta 0 0 0.00 $ 121,035.00 41.0% 71,410.65$ Yes MOD35M-18 MOD35M-18 Modular Movable Jack Unit With **18’ Long Track. (*not e 0 0 0.00 $ 121,035.00 41.0% 71,410.65$ Yes MOD35M-21 MOD35M-21 Modular Movable Jack Unit With** 21’ Long Track. (*not equipped with adapter kits)
0 0 0.00 $ 121,035.00 41.0% 71,410.65$ Yes EXHIBIT 1
MOD35M-24 MOD35M-24 Modular Movable Jack Unit With ** 24' Long Track (*not equipped with adapter kits) 0 0 0.00 $ 121,035.00 41.0% 71,410.65$ Yes For MOD35M frame only. Any For MOD35M frame only. Any length. 0 0 0.00 $ 82,304.00 41.0% 48,559.36$ Yes MOD35S MOD35S Modular Stationary Jack Unit (*not equipped with adapter kits) 0 0 0.00 $ 72,946.00 41.0% 43,038.14$ Yes AK-SBA70-2PK AK-SBA70-2PK Adapter kit for most School Bus applications. For use on (2- Post lift configuration). AK-SBA70-2 HEAVY DUTY HL $ 13,431.00 41.0% 7,924.29$ No AK-HTA70-2PK AK-HTA70-2PK Adapter kit for most Heavy Duty Truck applications. For use on (2-Post lift configuration). AK-HTA70-2 HEAVY DUTY HL $ 13,431.00 41.0% 7,924.29$ No AK-ULP70-2PK AK-ULP70-2PK Adapter kit for most Low Profile Transit Bus operations.
For use on (2-Post lift configuration). AK-ULP70-2 HEAVY DUTY HL $ 15,881.00 41.0% 9,369.79$ No AK-ULP105-3PK AK-ULP105-3PK Adapter kit for most Transit Bus applications. For use on (3-Post lift configuration). AK-ULP105- HEAVY DUTY HL $ 20,304.00 41.0% 11,979.36$ NO AK-HTA105-3PK AK-HTA105-3PK Adapter kit for most Heavy Duty Truck applications. For use on (3-Post lift configuration). AK-HTA105- HEAVY DUTY HL $ 19,229.00 41.0% 11,345.11$ No FD2361BK FD2361BK Universal Adapter Stand Kit. FD2361 ACC. AC $ 406.00 25.0% 304.50$ No FD2438BK FD2438BK Mobile Adapter Cart. FD2438BK ACC. AC $ 1,817.00 25.0% 1,362.75$ No FD2356ECYL FD2356ECYL Low Profile Saddle (no adatpers) (flat plate) FD2356 ACC. AC $ 3,312.00 25.0% 2,484.00$ Yes FD2408ECYL FD2408ECYL Ultra Flat Low Profile Saddle with 2 sets of inserts included FD2408ECYL ACC. AC $ 7,357.00 25.0% 5,517.75$ Yes FD2382ECYL FD2382ECYL 3 Hole Sliding Adapter for FD2347 Saddle - must order 2. FD2382 ACC. AC $ 788.00 25.0% 591.00$ Yes FD6798 FD6798 Preconfigured #5 rebar mat (price is per each 3' x 4' section) for ease of installation. FD6798 ACC. AC $ 370.00 25.0% 277.50$ Yes MC100045BK MC100045BK Liquid Evacuation Kit for 2-Post MOD35. MC100045BK ACC. AC $ 5,614.00 25.0% 4,210.50$ No MC100046BK MC100046BK Liquid Evacuation Kit for 3-Post MOD35. MC100046BK ACC. AC $ 7,654.00 25.0% 5,740.50$ No MC100039RD MC100039RD Pedestal Kit. MC100039RD ACC. AC $ 544.00 25.0% 408.00$ No MC100040 MC100040 Cord Reel -- No Festoon Special Low Voltage, Clutch Contacts. For Pendant only operation. MC100040 ACC. AC $ 6,405.00 25.0% 4,803.75$ No MC100050 MC100050 MOD35 FLEX™ Remote Control Kit - 2 Post MC100050 ACC. AC $ 9,982.00 25.0% 7,486.50$ No MC100049 MC100049 MOD35 FLEX™ Remote Control Kit - 3 Post & Tandem MC100049 ACC. AC $ 10,887.00 25.0% 8,165.25$ No MC100052 MC100052 MOD30 FLEX™ Remote Control Kit - 2 Post (Converts JT14 cylinders only) MC100052 ACC. AC $ 12,490.00 25.0% 9,367.50$ Yes MC100051 MC100051 MOD30 FLEX™ Remote Control Kit - 3 Post & Tandem (Converts JT14 cylinders only) MC100051 ACC. AC $ 13,136.00 25.0% 9,852.00$ Yes AK-SBA60-2PK AK-SBA60-2PK Adapter kit for most School Bus applications. For use on (2- Post lift configuration). AK-SBA60-2 HEAVY DUTY HL $ 13,431.00 41.0% 7,924.29$ No AK-HTA60-2PK AK-HTA60-2PK Adapter kit for most Heavy Duty Truck applications. For use on (2-Post lift configuration). AK-HTA60-2 HEAVY DUTY HL $ 13,431.00 41.0% 7,924.29$ NO AK-TRLP60-2PK AK-TRLP60-2PK Adapter kit for most Low Profile Transit Bus operations.
For use on (2-Post lift configuration). AK-TRLP60- HEAVY DUTY HL $ 15,881.00 41.0% 9,369.79$ No AK-HTA90-3PK AK-HTA90-3PK Adapter kit for most Heavy Duty Truck applications. For use on (3-Post lift configuration). AK-HTA90-3 HEAVY DUTY HL $ 21,684.00 41.0% 12,793.56$ No AK-TRLP90-3PK AK-TRLP90-3PK Adapter kit for most Low Profile Transit Bus operations.
For use on (3-Post lift configuration). AK-TRLP90- HEAVY DUTY HL $ 19,229.00 41.0% 11,345.11$ No EFX1712165000 EFX1712165000 2 Scissor Pendant - hand held. No Festoon. EFX1712165 ACC. AC $ 13,480.00 25.0% 10,110.00$ Yes EFX1712165100 EFX1712165100 3 Scissor Pendant - hand held. No Festoon. EFX1712165 PARTS BP $ 17,652.00 25.0% 13,239.00$ Yes EFX0906211002 EFX0906211002BK Shims available in 1/8” thickness. EFX0906211 ACC. AC $ 19.00 25.0% 14.25$ Yes EFX0906211003 EFX0906211003BK Shims available in 1/4” thickness. EFX0906211 ACC. AC $ 20.00 25.0% 15.00$ Yes EFX0906211004 EFX0906211004BK Shims available in 1/2” thickness. EFX0906211 ACC. AC $ 20.00 25.0% 15.00$ Yes EFX1401031200 EFX1401031200YL Three (3) Hole Sliding Adapter for Rear EFX. EFX1401031 ACC. AC $ 5,619.00 25.0% 4,214.25$ Yes EFX0809511200 EFX0809511200BL 6" cover for 48" wide pit EFX0809511 PARTS BP $ 546.00 25.0% 409.50$ Yes EFX0809531200 EFX0809531200BL 12" cover for 48" wide pit EFX0809531 PARTS BP $ 556.00 25.0% 417.00$ Yes EFX0809471200 EFX0809471200BL 24" cover for 48" wide pit EFX0809471 PARTS BP $ 944.00 25.0% 708.00$ Yes EFX1207511200 EFX1207511200BL 6" cover for 50" wide pit (Tandem) EFX1207511 PARTS BP $ 618.00 25.0% 463.50$ Yes EFX1207521200 EFX1207521200BL 12" cover for 50" wide pit (Tandem) EFX1207521 PARTS BP $ 900.00 25.0% 675.00$ Yes EFX1207531200 EFX1207531200BL 24" cover for 50" wide pit (Tandem) EFX1207531 PARTS BP $ 1,284.00 25.0% 963.00$ Yes EFX1601100012 EFX1601100012 17' Nosing Kit EFX1601100 ACC. AC $ 3,989.00 25.0% 2,991.75$ Yes EFX1601200012 EFX1601200012 13' Nosing Kit EFX1601200 ACC. AC $ 3,478.00 25.0% 2,608.50$ Yes EFX1601300012 EFX1601300012 10' Nosing Kit EFX1601300 ACC. AC $ 2,966.00 25.0% 2,224.50$ Yes EFX1601400012 EFX1601400012 Stationary Nosing Kit EFX1601400 ACC. AC $ 1,266.00 25.0% 949.50$ Yes EFX1601500012 EFX1601500012 Tandem Nosing Kit EFX1601500 ACC. AC $ 2,966.00 25.0% 2,224.50$ Yes P5117 P5117-200VBK (2) 10.6" piston, all electric, 350 PSI, 25000 lbs of capacity P5117-200V HEAVY DUTY HL $ 24,149.00 41.0% 14,247.91$ Yes EXHIBIT 1
P5118 P5118-200VBK (3) 10.6" piston, all electric, 350 PSI, 25000 lbs of capacity P5118-200 HEAVY DUTY HL $ 24,149.00 41.0% 14,247.91$ Yes P5122 P5122-200VBK (2) 10.6" piston, all electric, 350 PSI, 25000 lbs of capacity per piston P5122-200 HEAVY DUTY HL $ 31,725.00 41.0% 18,717.75$ Yes P863 P863-200VBK (2) 10.6" piston, all electric, 350 PSI, In Pit and Equalized, 25000 lbs of capacity per piston. P863-200 HEAVY DUTY HL $ 41,434.00 41.0% 24,446.06$ No P862 P862-200VBK (3) 10.6" piston, all electric, 350 PSI, In Pit and Equalized, 25000 lbs of capacity per piston. P862-200 HEAVY DUTY HL $ 53,823.00 41.0% 31,755.57$ Yes AK-SBA50-2PK AK-SBA50-2PK Adapter Kit for MOST school bus applications. For use on a 2 piston configuration. AK-SBA50-2 HEAVY DUTY HL $ 11,682.00 41.0% 6,892.38$ No AK-HTA50-2PK AK-HTA50-2PK Adapter Kit for MOST heavy truck applications. For use on a 2 piston configuration. AK-HTA50-2 HEAVY DUTY HL $ 11,682.00 41.0% 6,892.38$ NO AK-HTA75-DUAL AK-HTA75-DUAL Adapter Kit for MOST heavy truck applications. For use on a 3 piston configuration. AK-HTA75 HEAVY DUTY HL $ 11,682.00 41.0% 6,892.38$ No AK-ULP50-2PK AK-ULP50-2PK Adapter Kit for MOST transit applications. For use on a 2 piston configuration. AK-ULP50-2 HEAVY DUTY HL $ 15,881.00 41.0% 9,369.79$ No AK-ULP75-3PK AK-ULP75-3PK Adapter Kit for MOST transit applications. For use on a 3 piston configuration. AK-ULP75-3 HEAVY DUTY HL $ 19,510.00 41.0% 11,510.90$ No FD2361 FD2361BK Universal Adapter Stand Kit FD2361 ACC. AC $ 406.00 25.0% 304.50$ No FD2438 FD2438BK Mobile Car for Universal Adapters FD2438BK ACC. AC $ 1,817.00 25.0% 1,362.75$ No FA75 FA75
Remote Push button starter. For use as a remote switch
on multi-lift installations. Consult factory for power unit.
For surface mounted power units only.
FA75 ACC. AC $ 409.00
25.0% 306.75$ No
V44-28 S VRX44-28LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 300" Wb 44,000lb Capacity 28" V44-28 S HEAVY DUTY HL $ 186,700.00 41.0% 110,153.00$ NO V44-30 S VRX44-30LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 324" Wb 44,000lb Capacity 30" V44-30 S HEAVY DUTY HL $ 191,265.00 41.0% 112,846.35$ No V44-32 S VRX44-32LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 348" Wb 44,000lb Capacity 32' V44-32 S HEAVY DUTY HL $ 195,570.00 41.0% 115,386.30$ No V44-36 S VRX44-36LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 396" Wb 44,000lb Capacity 36' V44-36 S HEAVY DUTY HL $ 207,684.00 41.0% 122,533.56$ No V64-28 S VRX64-28LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 300" Wb 64,000lb Capacity 28" V64-28 S HEAVY DUTY HL $ 191,914.00 41.0% 113,229.26$ NO V64-30 S VRX64-30LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 324" Wb 64,000lb Capacity 30" V64-30 S HEAVY DUTY HL $ 196,483.00 41.0% 115,924.97$ NO V64-32 S VRX64-32LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 348" Wb 64,000lb Capacity 32' V64-32 S HEAVY DUTY HL $ 201,039.00 41.0% 118,613.01$ NO V64-36 S VRX64-36LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 396" Wb 64,000lb Capacity 36' V64-36 S HEAVY DUTY HL $ 214,151.00 41.0% 126,349.09$ NO V64-48 S VRX64-48LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 540" Wb 64,000lb Capacity 48' V64-48 S HEAVY DUTY HL $ 234,318.00 41.0% 138,247.62$ NO V80-28 S VRX80-28LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 300" Wb 80,000lb Capacity 28' V80-28 S HEAVY DUTY HL $ 206,761.00 41.0% 121,988.99$ No V80-28 F VRX80-28LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 300" Wb 80,000lb Capacity 28' V80-28 F HEAVY DUTY HL $ 196,580.00 41.0% 115,982.20$ No V80-30 S VRX80-30LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 324" Wb 80,000lb Capacity 30' V80-30 S HEAVY DUTY HL $ 209,024.00 41.0% 123,324.16$ No V80-30 F VRX80-30LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 324" Wb 80,000lb Capacity 30' V80-30 F HEAVY DUTY HL $ 198,843.00 41.0% 117,317.37$ No V80-32 S VRX80-32LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 348" Wb 80,000lb Capacity 32' V80-32 S HEAVY DUTY HL $ 215,101.00 41.0% 126,909.59$ No V80-32 F VRX80-32LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 348" Wb 80,000lb Capacity 32' V80-32 F HEAVY DUTY HL $ 204,919.00 41.0% 120,902.21$ No V80-48 S VRX80-48LS00RD 4-Leg Surface Mounted Clear Floor Open Base Vertical Rise Lift 540" Wb 80,000lb Capacity 48' V80-48 S HEAVY DUTY HL $ 245,610.00 41.0% 144,909.90$ No V80-48 F VRX80-48LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 540" Wb 80,000lb Capacity 48' V80-48 F HEAVY DUTY HL $ 235,429.00 41.0% 138,903.11$ No V40006 V40006 Built-in Air V40006 ACC. AC $ 6,169.00 25.0% 4,626.75$ No V40007 V40007BL 8 ft. (2.4m) Drive-thru ramp kit. V40007BL ACC. AC $ 10,649.00 25.0% 7,986.75$ No V40008 V40008BL 10 ft. (3m) Drive-thru ramp kit V40008BL ACC. AC $ 12,639.00 25.0% 9,479.25$ No V40009 V40009BL 12 ft. (3.7m) Drive-thru ramp kit. V40009BL ACC. AC $ 14,633.00 25.0% 10,974.75$ No V40034 V40034 Light Kit (pair) Kits required: 28’-30’=3 kits; 32’-36’=4 kits; 48’=5 kits. 50' cords V40034 ACC. AC $ 2,402.00 25.0% 1,801.50$ No EXHIBIT 1
APAUXHT APAUXHT Height Limiter included on all VRX models. It is turned on with Rotary Programming Tool. APAUXHT ACC. AC $ 991.00 25.0% 743.25$ Yes AB100004RD AB100004RD Retractable Wheel Kit for Rolling Jack AB100004 ACC. AC $ 7,180.00 25.0% 5,385.00$ No VREX 28' PIT COVERS V40033WG Pit Covers for VREX Lifts (28' & 30' Runway Version, kit is for both runways) V40033WG ACC. AC $ 39,407.00 25.0% 29,555.25$ Yes VREX 32' PIT COVERS V40033WG Pit Covers for VREX Lifts (32' Runway Version, kit is for both runways) V40033WG ACC. AC $ 39,407.00 25.0% 29,555.25$ Yes VREX 36' PIT COVERS V40035WG Pit Covers for VREX Lifts (36' Runway Version, kit is for both runways) V40035WG ACC. AC $ 53,797.00 25.0% 40,347.75$ Yes VREX 48' PIT COVERS V40038WG Pit Covers for VREX Lifts (48' Runway Version, kit is for both runways) V40038WG ACC. AC $ 68,241.00 25.0% 51,180.75$ Yes V30100 V30100 Laptop Programmer Cord for vertical rise (VRX) only. V30100 ACC. AC $ 710.00 25.0% 532.50$ No Cord Reel V40036 VRX Cord Reel for the Pendant (sold seperately) V40036 ACC. AC $ 5,266.00 25.0% 3,949.50$ Yes V40010 V40010 VRX Pendant V40010 ACC. AC $ 4,177.00 25.0% 3,132.75$ No V40011 V40011 Stainless Steel remote panel for controlling washbay units. V40011 ACC. AC $ 8,280.00 25.0% 6,210.00$ No AP00405 AP00405 1/16" x 4" x 4" Finger Shims (1.53mm x 101.6mm x 101.6mm) AP00405 PARTS BP $ 17.00 25.0% 12.75$ Yes AP00406 AP00406 1/8" x 4" x 4" Finger Shims (2.54mm x 101.6mm x 101.6mm) AP00406 PARTS BP $ 19.00 25.0% 14.25$ Yes AP00407 AP00407 1/4" x 4" x 4" Finger Shims (6.35mm x 101.6mm x 101.6mm) AP00407 PARTS BP $ 20.00 25.0% 15.00$ Yes AC100003 AC100003 Laptop Programmer Cord for parallelogram only. AC100003 PARTS BP $ 710.00 25.0% 532.50$ No AC300016 AC300016 Stainless Steel remote panel for controlling washbay units. AC300016 ACC. AC $ 8,046.00 25.0% 6,034.50$ Yes Junior-Jack2 Junior-Jack2
Portable high rise jack assembly for removal and
transportation of fuel tanks, transmissions, transfer cases and other items. With air assist and foot pedal adjustment for ease in raising and lowering components, swivel caster wheels and patented corrosion protection on the cylinder piston assembly.
JUNIOR-JAC ACC. AC $ 6,277.00
25.0% 4,707.75$ Yes
GA4 GA4
Flat style transmission and accessory table with large
rubber supports, two straps and a 12 degree tilt. Easily mounts to any pit lift. (4,400 lb. capacity)
BLITZ ACC. AC $ 1,654.00
25.0% 1,240.50$ No
R12 R12 Rear of AT1012, AT1212 R12 ACC. AC $ 1,684.00 25.0% 1,263.00$ No FD6690EGBK FD6690EGBK Totally contained steel enclosure and protected with Enviroguard inside and outside FD6690 ACC. AC $ 21,593.00 25.0% 16,194.75$ No R1150 RWC1150.30IB Premium Leverless Center Post Clamping Tire Changer RWC1150.30 CHANGER/BAL/ALIGNERS WS $ 23,252.00 41.0% 13,718.68$ No R247D.CL RWC247D.CLIB Center Post Swing Arm RWC247 CHANGER/BAL/ALIGNERS WS $ 16,889.00 41.0% 9,964.51$ No R145D RWC645D.26IHRB Tilt Back High Performance Tire Changer RWC645 CHANGER/BAL/ALIGNERS WS $ 16,455.00 41.0% 9,708.45$ No R148 Pro 2D RWB348DB Pro 2D Collets Computer Balancer With Self Calibration and Self Diagnostics RWB348DB CHANGER/BAL/ALIGNERS WS $ 8,780.00 41.0% 5,180.20$ No R146R RWC246.26IRB Swing Arm Pro High Performance Tire Changer RWC246 CHANGER/BAL/ALIGNERS WS $ 9,657.00 41.0% 5,697.63$ No R146RP RWC246.26IRP Swing Arm Pro High Performance Tire Changer With Helper Arm RW246 CHANGER/BAL/ALIGNERS WS $ 12,850.00 41.0% 7,581.50$ No R140i RWC240.22IB Swing Arm Pro RWC240.22I CHANGER/BAL/ALIGNERS WS $ 7,221.00 41.0% 4,260.39$ No PLUS91N PLUS91N Air-Driven Helper With Following Arm and Lower Bead Roller for Model R140i Swing Arm Changer PLUS91N ACCS WA $ 3,000.00 25.0% 2,250.00$ No R511 RWC11EISB Heavy Duty Truck Tire Changer Leverless HD RWC11EISB CHANGER/BAL/ALIGNERS WS $ 24,182.00 41.0% 14,267.38$ No R501N RWC101B Heavy Duty Truck Tire Changer Speed Changer HD RWC101B CHANGER/BAL/ALIGNERS WS $ 36,358.00 41.0% 21,451.22$ No R560 RWC26HWSB Heavy Duty Truck Tire Changer Mobile HD RWC26 CHANGER/BAL/ALIGNERS WS $ 19,633.00 41.0% 11,583.47$ No VSG1000A102 VSG1000A102 5 Stud Kit 110mm Long for Reverse Rims Used on VSG1000A87 VSG1000A10 ACCS WA $ 194.00 25.0% 145.50$ No VSG1000A86 VSG1000A86 Mirror for R1150 VSG1000A86 ACCS WA $ 252.00 25.0% 189.00$ No VSG1000A118 VSG1000A118 Match Mounting Roller for R1150 VSG1000A11 ACCS WA $ 372.00 25.0% 279.00$ No VSG800A35 VSG800A35 Pneumatic Wheel Lift for Tire Changers VSG800A35 ACCS WA $ 2,044.00 25.0% 1,533.00$ No PLUS91SA PLUS91SA Air Driven Helper With Following Arm and Lower Bead Roller for Model R146 Swing Arm Changer PLUS91SA ACCS WA $ 3,222.00 25.0% 2,416.50$ No VSG800A69 VSG800A69 Wheel Lift Attachment That Works With PLUS91SA Helper VSG800A69 ACCS WA $ 944.00 25.0% 708.00$ No VSG800A58 VSG800A58 Traction Point for PLUS91SA and PLUS91N Helper Arms VSG800A58 ACCS WA $ 401.00 25.0% 300.75$ No EXHIBIT 1
VSG800A77 VSG800A77 Storage Tray for R145D, R145 and R146 VSG800A77 ACCS WA $ 321.00 25.0% 240.75$ No VSG800A18 VSG800A18 Bead Pushing Roller for R145D, R145, R146 and R140i VSG800A18 ACCS WA $ 332.00 25.0% 249.00$ No VSG1000A11 VSG1000A11 Half Moon Bead Lever Performance Tire Lever VSG1000A11 ACCS WA $ 143.00 25.0% 107.25$ No VSG800A126 VSG800A126 Plastic Tool Head W/Support for Tilt Back Units Included With Tilt Back Tire Changer VSG800A126 ACCS WA $ 225.00 25.0% 168.75$ No VSG800A60 VSG800A60 Plastic Tool Head W/Support for Swing Arm Units Included With All Swing Arm Tire Changers VSG800A60 ACCS WA $ 225.00 25.0% 168.75$ No VSG800A99 VSG800A99 Motorcycle Adapters for 20-22" Tables VSG800A99 ACCS WA $ 576.00 25.0% 432.00$ No VSG800A107 VSG800A107 Motorcycle Adapters for 24-26" Tables VSG800A107 ACCS WA $ 974.00 25.0% 730.50$ No VSG800A111 VSG800A111KIT Reducing Clamp to 8" Requires VSG800A107 or VSG800A99 VSG800A111 ACCS WA $ 803.00 25.0% 602.25$ No VSG108A25 VSG108A25 OptionaL Clamp for Earth Moving Wheels for All Heavy Duty Tire Changers VSG108A25 ACCS WA $ 246.00 25.0% 184.50$ No VSG90A6 VSG90A6 Optional Aluminum Rim Clamp for All Heavy Duty Tire Changers VSG90A6 ACCS WA $ 380.00 25.0% 285.00$ No VSG108A22 VSG108A22 Disc for Wheels With Lock Ring for Model R560 VSG108A22 ACCS WA $ 1,308.00 25.0% 981.00$ No VSG108A24 VSG108A24 Disc for Wheels With Lock Ring and Agricultural Wheel for Model R501N VSG108A24 ACCS WA $ 1,323.00 25.0% 992.25$ No VSG800A117KIT VSG800A117KIT Tool Protection Kit for Models R145, R145D, R146 and R140 VSG800A117 PARTS WP $ 26.00 25.0% 19.50$ No VSG800A11 VSG800A11 Bead Breaker Protection for Models R145/D, R146 & R140i VSG800A11 PARTS WP $ 24.00 25.0% 18.00$ No VSG800A6KIT VSG800A6KIT Replacement 4 Clamp Protectors for Models R145, R145D and R146 VSG800A6KI PARTS WP $ 49.00 25.0% 36.75$ No VSG800A98 VSG800A98 Replacement 4 Clamp Protector for Models R140 and R140i. VSG800A98 PARTS WP $ 61.00 25.0% 45.75$ No VSG1000A117 VSG1000A117 Replacement Upper Tool Used On R1150 Leverless VSG1000A11 PARTS WP $ 61.00 25.0% 45.75$ No VSG1000A117K VSG1000A117K Replacement Upper Tool Used On R1150 Leverless VSG1000A11 ACCS WA $ 932.00 25.0% 699.00$ No VS710013421 VS710013421 Replacement Hook VS71001342 PARTS WP $ 43.00 25.0% 32.25$ No VSG108A9 VSG108A9 Replacement Plastic Tool Protection for R501 Tire Changer VSG108A9 ACCS WA $ 27.00 25.0% 20.25$ No VS770011650 VS770011650 Replacement Plastic Tool for VSG800A60 Swing Arm Units VS77001165 ACCS WA $ 38.00 25.0% 28.50$ No VSG800A37 VSG800A37 Tire Paste for Tire Changers VSG800A37 PARTS WP $ 41.00 25.0% 30.75$ No R180 RWB380.3DTECB Pro 3D Auto Wheel Balancer RWB380 CHANGER/BAL/ALIGNERS WS $ 16,502.00 41.0% 9,736.18$ No R155 RWB355SB Pro 3D Wheel Balancer RWB355 CHANGER/BAL/ALIGNERS WS $ 12,024.00 41.0% 7,094.16$ No R138 RWB338FMDB Pro 2D Wheel Balancer RWB338 CHANGER/BAL/ALIGNERS WS $ 5,466.00 41.0% 3,224.94$ No R544 RWB280PLUSB Pro Truck 2D Wheel Balancer RWB280PLUS CHANGER/BAL/ALIGNERS WS $ 21,792.00 41.0% 12,857.28$ No GAR345 GAR345 Large Quick Nut Replacement For GAR101 GAR345 ACCS WA $ 424.00 25.0% 318.00$ No GAR324 GAR324 Wheel Lift With Automatic Compensation of Wheel Weight GAR324 ACCS WA $ 4,129.00 25.0% 3,096.75$ No GAR325 GAR325 Wheel Lift Standard Version GAR325 ACCS WA $ 3,767.00 25.0% 2,825.25$ No VS129580500 VS129580500 Rubber Protection VS12958050 PARTS WP $ 28.00 25.0% 21.00$ No VS129580191 VS129580191 Pressure Cap VS12958019 PARTS WP $ 64.00 25.0% 48.00$ No GAR102 GAR102 Handwheel Quick Fit Nut Optional Accessory for R122 GAR102 ACCS WA $ 365.00 25.0% 273.75$ No GAR351 GAR351 Standard Air Lock for Model R544 GAR351 ACCS WA $ 202.00 25.0% 151.50$ No GAR111 GAR111 Optional Passenger Cone Kit for R544 GAR111 ACCS WA $ 413.00 25.0% 309.75$ No GAR112 GAR112 Optional Small Light Truck Cone for R544 GAR112 ACCS WA $ 190.00 25.0% 142.50$ No GAR113 GAR113 Optional for All Wheel Balancers Dually Kit Double Sided Cone With Metal Backing Plate for Vans and Light Trucks GAR113 ACCS WA $ 626.00
25.0% 469.50$ No
GAR124 GAR124 Spacer for All Balancers GAR124 ACCS WA $ 467.00 25.0% 350.25$ No HW190E400045 HW190E400045 Distance Spacer Donut 40mm HW190E4000 ACCS WA $ 41.00 25.0% 30.75$ No HW150400110 HW150400110 Pro Collet Kit 40mm HW15040011 ACCS WA $ 1,590.00 25.0% 1,192.50$ No HW150400123 HW150400123 Low Taper Collect #10 40mm HW15040012 ACCS WA $ 369.00 25.0% 276.75$ No HW150400139 HW150400139 Low Taper Collet #11 40mm HW15040013 ACCS WA $ 452.00 25.0% 339.00$ No HW210400002 HW210400002 Series IV Quick Plate Kit 40mm HW21040000 ACCS WA $ 6,461.00 25.0% 4,845.75$ No HW200299409 HW200299409 North American Flange Plate Kit 40mm HW20029940 ACCS WA $ 2,669.00 25.0% 2,001.75$ No HW280400172 HW280400172 Pro Centering System HW28040017 ACCS WA $ 7,877.00 25.0% 5,907.75$ No HW900008205 HW900008205 Adapter Tree HW90000820 ACCS WA $ 428.00 25.0% 321.00$ No GAR346 GAR346 Laser Calibration Device GAR346 ACCS WA $ 406.00 25.0% 304.50$ No EXHIBIT 1
VS129580160 VS129580160 Pressure Ring VS12958016 PARTS WP $ 38.00 25.0% 28.50$ No GAR122 GAR122 Truck Spacer Standard With R544 GAR122 ACCS WA $ 937.00 25.0% 702.75$ No GAR114 GAR114 GAR114 Cones (2) (7.9"-8.7"-11") GAR114 ACCS WA $ 940.00 25.0% 705.00$ No GAR172 GAR172 Four Finger Adapter GAR172 ACCS WA $ 688.00 25.0% 516.00$ No GAR171 GAR171 For Model R544 3 Finger Adapter GAR171 ACCS WA $ 522.00 25.0% 391.50$ No GAR173 GAR173 Five Finger Adapter GAR173 ACCS WA $ 891.00 25.0% 668.25$ No HW700008006 HW700008006 HD Centering Stud Aluminum Wheels HW70000800 ACCS WA $ 85.00 25.0% 63.75$ No HW700008004 HW700008004 Centering Stud Turcks/Buses w/Larger Stud Holes HW70000800 ACCS WA $ 85.00 25.0% 63.75$ No HW700008005 HW700008005 Centering Stud Short Flat Head HW70000800 ACCS WA $ 85.00 25.0% 63.75$ No GAR266T GAR266T For Model R544 3D Wheel Tire Sensor Caliper for Automatic Measure of Rim Width GAR266T ACCS WA $ 987.00 25.0% 740.25$ No HW280400139 HW280400139 ProMax MD 40mm Centering Solutions for All 8 & 10 Lug MD Vehicles HW28040013 ACCS WA $ 4,081.00 25.0% 3,060.75$ No R1080Plus RWATD3000HPR Portable 3D Wheel Aligner System RWATD3000 CHANGER/BAL/ALIGNERS WS $ 37,124.00 41.0% 21,903.16$ No R1070 RWA7080WS Pro CCD 8-CCD Sensor Wheel Alignment System RWA7080 CHANGER/BAL/ALIGNERS WS $ 24,906.00 41.0% 14,694.54$ No R5000HD RWA8060TWS CTA Pro 6-CCD Heavy Duty Commercial Truck Aligner RWA8060TWS CHANGER/BAL/ALIGNERS WS $ 54,671.00 41.0% 32,255.89$ No STDA29L STDA29L Pair of Heavy Duty Turntables STDA29L ACCS WA $ 2,017.00 25.0% 1,512.75$ No STDA128 STDA128 Battery Set of 2 for Model R1080 Sensors STDA128 ACCS WA $ 842.00 25.0% 631.50$ No STDA101 STDA101 Set of 4 Clamping Arms 34" to 44" STDA101 ACCS WA $ 534.00 25.0% 400.50$ No STDA46EU STDA46EU Set of 2 Self Centering 4 Point Clamps With Quick Locking Units and ABS Claws STDA46EU ACCS WA $ 1,673.00 25.0% 1,254.75$ No STDA35E STDA35E Set of 2 Self Centering 3 Point Clamps With Quick Locking Units and ABS Claws STDA35E ACCS WA $ 3,846.00 25.0% 2,884.50$ No STDA33EU STDA33EU Set of 2 Self Centering 4 Point Clamps With Removable Claws Clamps 10" to 24" Wheels STDA33EU ACCS WA $ 803.00 25.0% 602.25$ No STDA92 STDA92 Patented Set of 2 Non-Run Out Quick Adapters for Model R5000HD STDA92 ACCS WA $ 6,303.00 25.0% 4,727.25$ No STDA49N STDA49N Truck Trailer Alignment Fixture for R5000HD STDA49N ACCS WA $ 2,586.00 25.0% 1,939.50$ No STDA39 STDA39 8 Tips Cone Style STDA39 ACCS WA $ 62.00 25.0% 46.50$ No VS14000AA VS14000AA One Standard Depth ABS Claw for 3 Point Quick Clamps VS14000AA ACCS WA $ 16.00 25.0% 12.00$ No STDA3D/QC STDA3D/QC Kit of Two Stands for Model R1080 STDA3D/QC ACCS WA $ 2,350.00 25.0% 1,762.50$ No STDA14 STDA14 CCD Calibration Kit STDA14 ACCS WA $ 3,517.00 25.0% 2,637.75$ No Z100039BK Z100039BK Camera Brackets for Rotary YA12 Lift Z100039BK ACCS WA $ 72.00 25.0% 54.00$ No BP9 BP9113000BL Symmetric Arms & Columns, Chain Driven 9,000lb Capacity BP9 FORWARD FL $ 8,812.00 41.0% 5,199.08$ No I10 I10N500MBL Three Stage Front Spot-Rite Arms Symmetric Columns 10,000lb Capacity 2 Post Lift I10 FORWARD FL $ 8,163.00 41.0% 4,816.17$ No I12N300 I12N300BL 3 Stage Symmetric Overall Height 166" I12T FORWARD FL $ 15,222.00 41.0% 8,980.98$ No I12N301 I12N301BL 3 Stage Symmetric Overall Height 178" I12T FORWARD FL $ 15,222.00 41.0% 8,980.98$ No I12N302 I12N302BL 3 Stage Symmetric Overall Height 154" I12T FORWARD FL $ 15,222.00 41.0% 8,980.98$ No I12N303 I12N303BL 3 Stage Symmetric Overall Height 143" I12T FORWARD FL $ 15,222.00 41.0% 8,980.98$ No F12N300 F12N300TYBL 2 Stage Symmetric Overall Height 166" F12T FORWARD FL $ 12,388.00 41.0% 7,308.92$ No F12N301 F12N301TYBL 2 Stage Symmetric Overall Height 178" F12T FORWARD FL $ 12,388.00 41.0% 7,308.92$ No F12N302 F12N302TYBL 2 Stage Symmetric Overall Height 154" F12T FORWARD FL $ 12,388.00 41.0% 7,308.92$ No F12N303 F12N303TYBL 2 Stage Symmetric Overall Height 143" F12T FORWARD FL $ 12,388.00 41.0% 7,308.92$ No DP15N000 DP15N000BL Symmetric Screw Type Adjustable Adapters Pads 2 Post Lift 15,000lb Capacity Overall Height 12' 10 3/4" DP15 FORWARD FL $ 21,329.00 41.0% 12,584.11$ No DP15N001 DP15N001BL Symmetric Screw Type Adjustable Adapters Pads 2 Post Lift 15,000lb Capacity Overall Height 14' 7" DP15 FORWARD FL $ 21,329.00 41.0% 12,584.11$ No DP15N002 DP15N002BL Symmetric Screw Type Adjustable Adapters Pads 2 Post Lift 15,000lb Capacity Overall Height 16' 7" DP15 FORWARD FL $ 22,922.00 41.0% 13,523.98$ No DP18N000 DP18PN000BL
Symmetric Arms & Columns Screw Type Adjustable
Adapter Pads 2 Post Lift 18,000lb Capacity Overall Height 12' 10 3/4"
DP18 FORWARD FL $ 32,302.00
41.0% 19,058.18$ No
DP18N001 DP18PN001BL Symmetric Screw Type Adjustable Adapters Pads 2 Post Lift 15,000lb Capacity Overall Height 14' 7" DP18 FORWARD FL $ 32,302.00 41.0% 19,058.18$ No DP18N002 DP18PN002BL Symmetric Screw Type Adjustable Adapters Pads 2 Post Lift 15,000lb Capacity Overall Height 16' 7" DP18 FORWARD FL $ 33,624.00 41.0% 19,838.16$ No CR14 CR14N201YBL General Service 4 Post Lift 14,000lb Capacity 182.5" Wheelbase CR14T FORWARD FL $ 14,166.00 41.0% 8,357.94$ No EXHIBIT 1
CR14 EL CR14N202YBL General Service 4 Post Lift 14,000lb Capacity 215" Wheelbase 0 0 0.00 $ 16,504.00 41.0% 9,737.36$ No S100136M S100136MBL Bolt On Alignment Kit S100136MBL ACC. AC $ 6,408.00 25.0% 4,806.00$ No S100137M S100137MBL Bolt On Alignment Kit EL2 S100137MBL ACC. AC $ 7,265.00 25.0% 5,448.75$ No S100183 S100183 Efficiency Kit For CR14/CRO14 S100183 ACC. AC $ 11,590.00 25.0% 8,692.50$ No CRA14 CRA14N201YBL Alignment Rack 4 Post 14,000lb Capacity 182.5" Wheelbase CRA14T FORWARD FL $ 30,470.00 41.0% 17,977.30$ No CRA14 EL CRA14N202YBL Alignment Rack 4 Post 14,000lb Capacity 215" Wheelbase CRA14T FORWARD FL $ 33,240.00 41.0% 19,611.60$ No S100138 S100138BL Bolt On Alignment Kit for CR18 S100138BL ACC. AC $ 10,250.00 25.0% 7,687.50$ No S100139 S100139BL Bolt On Alignment Kit for CR18-3 S100139BL ACC. AC $ 10,771.00 25.0% 8,078.25$ No S100184 S100184 Efficiency Kit For CR18 Includes (2) Rolling Jacks and Internal Airline Kit S100184 ACC. AC $ 16,719.00 25.0% 12,539.25$ No M140130 M140130RD Drive On Runway Assembly Includes Airline Kit for use with FCH 25' Length M140130RD ACC. AC $ 28,803.00 25.0% 21,602.25$ No FCH218 FCH218U200RDYL Portable (2) Column Lift Battery Operated With Adjustable Forks 36,000lb Capacity FCH218 MOBILE COLUMN FM $ 39,134.00 41.0% 23,089.06$ No FCH418 FCH418U200RDYL Portable (4) Column Lift Battery Operated With Adjustable Forks 72,000lb Capacity FCH418 MOBILE COLUMN FM $ 78,265.00 41.0% 46,176.35$ No FCH618 FCH618U200RDYL Portable (6) Column Lift Battery Operated With Adjustable Forks 108,000lb Capacity FCH618 MOBILE COLUMN FM $ 117,397.00 41.0% 69,264.23$ No M140101 M140101KITRD Drive On Runway Assembly for FCH418 M140101KIT PARTS BP $ 68,016.00 25.0% 51,012.00$ No M140166 M140166RD Bolt Down Kit For FCH13 M140166RD ACC. AC $ 768.00 25.0% 576.00$ No M140165 M140165RD Bolt Down Kit For FCH18 M140165RD ACC. AC $ 768.00 25.0% 576.00$ No M140071 M140071YL Wheel Adapters M140071YL ACC. AC $ 2,625.00 25.0% 1,968.75$ No EFP8 EFP8P000MBK 4 Post Enthusiast Lift 8,000lb Capacity EFP8 FORWARD FL $ 9,007.00 41.0% 5,314.13$ No EFP9 EFP9P000MBK 4 Post Enthusiast Lift 9,000lb Capacity EFP9 FORWARD FL $ 11,019.00 41.0% 6,501.21$ No 6000MRL 6000MRLFBK Portable Mid Rise Lift 6,000lb Capacity 0 0 0.00 $ 5,672.00 41.0% 3,346.48$ No BJ10 BJ10BK Jack For Motorcycle Lift BJ10BK 0 0.00 $ 342.00 41.0% 201.78$ No RRJ70G RRJ71GFWD Pneumatic Hydraulic Rolling Bridge Jack 7,000lb Capacity RRJ71GFWD ACC. AC $ 5,359.00 25.0% 4,019.25$ No RJ901000 RJ901000YBK Pneumatic Hydraulic Rolling Bridge Jack 9,000lb Capacity RJ901000Y ACC. AC $ 7,924.00 25.0% 5,943.00$ No RJ153BK RJ153BK Ramp Kits RJ153BK ACC. AC $ 18,464.00 25.0% 13,848.00$ No RJ22L RJ22BK Pneumatic Hydraulic Rolling Bridge Jack 22,000lb Capacity RJ22BK ACC. AC $ 25,058.00 25.0% 18,793.50$ No FJ6263 FJ6263 Wide Drop In Adapter for DP10/I10 Lifts With 1 1/4" Diameter Pilot for Lifting FJ6263 ACC. AC $ 1,053.00 25.0% 789.75$ No FJ6257KIT FJ6257KIT Wide Drop In Adapter for DP10/I10 Lifts With 1 1/2" Diameter Pilot for Lifting FJ6257KIT ACC. AC $ 976.00 25.0% 732.00$ No FJ6245KIT FJ6245Y Kit of Four Round Adapters Bracket and Hardware FJ6245Y ACC. AC $ 190.00 25.0% 142.50$ No 2800929 2800929BL 24" Wide 47" Long Mounted Approach Drive Thru Ramps Set of Two 2800929BL ACC. AC $ 2,237.00 25.0% 1,677.75$ No 134K01 134K01BL 24" Wide 72" Long Floor Mounted Approach Drive Thru Ramps Set of Two 134K01 ACC. AC $ 4,020.00 25.0% 3,015.00$ No TT1000YKIT TT1000YKIT Standard Turning Radius Gauge Kit TT1000YKIT ACC. AC $ 778.00 25.0% 583.50$ No F10 F10N500MBL FORWARD FL $ 7,560.00 41.0% 4,460.40$ No EFX60 EFX-60-S Flush stationary scissor, 48” pocket opening, not equipped with adapter kits. 0 $ 253,883.00 41.0% 149,790.97$ Yes EFX90 EFX-90-S 0 $ 284,982.00 41.0% 168,139.38$ Yes XA12 XA12N000RD Scissor alignment XA12 LIGHT DUTY LL $ 44,062.00 41.0% 25,996.58$ No V44-28 F VRX44-28LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 44,000lb Capacity With 300" Max Wheelbase V44-28 F HEAVY DUTY HL $ 176,514.00 41.0% 104,143.26$ No V44-30 F VRX44-30CF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 44,000lb Capacity With 324" Max Wheelbase V44-30 F HEAVY DUTY HL $ 181,079.00 41.0% 106,836.61$ No V44-32 F VRX44-32LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 44,000lb Capacity With 348" Max Wheelbase V44-32 F HEAVY DUTY HL $ 185,388.00 41.0% 109,378.92$ No V44-36 F VRX44-36CF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 44,000lb Capacity With 396" Max Wheelbase V44-36 F HEAVY DUTY HL $ 197,500.00 41.0% 116,525.00$ No V64-28 F VRX64-28LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 64,000lb Capacity With 300" Max Wheelbase V44-36 F HEAVY DUTY HL $ 181,734.00 41.0% 107,223.06$ NO EXHIBIT 1
V64-30 F VRX64-30LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 64,000lb Capacity With 324" Max Wheelbase V64-28 F HEAVY DUTY HL $ 186,300.00 41.0% 109,917.00$ NO V64-32 F VRX64-32LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 64,000lb Capacity With 348" Max Wheelbase V64-30 F HEAVY DUTY HL $ 190,855.00 41.0% 112,604.45$ NO V64-36 F VRX64-36CF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 64,000lb Capacity With 396" Max Wheelbase V64-32 F HEAVY DUTY HL $ 203,965.00 41.0% 120,339.35$ NO V64-48 F VRX64-48LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 64,000lb Capacity With 540" Max Wheelbase V64-36 F HEAVY DUTY HL $ 224,135.00 41.0% 132,239.65$ NO V80-28 F VRX80-28LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 80,000lb Capacity With 300" Max Wheelbase V64-48 F HEAVY DUTY HL $ 196,580.00 41.0% 115,982.20$ No V80-30 F VRX80-30LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 80,000lb Capacity With 324" Max Wheelbase V80-28 F HEAVY DUTY HL $ 198,843.00 41.0% 117,317.37$ No V80-32 F VRX80-32LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 80,000lb Capacity With 348" Max Wheelbase V80-30 F HEAVY DUTY HL $ 204,919.00 41.0% 120,902.21$ No V80-48 F VRX80-48LF00RD 4-Leg Flush Mounted Clear Floor Open Base Vertical Rise Lift 80,000lb Capacity With 540" Max Wheelbase V80-32 F HEAVY DUTY HL $ 235,429.00 41.0% 138,903.11$ No SPO10-TRIO-FA SPO10N1600BL 2 Post Symmetric Lift With TRIO Flip Up Adapters V80-48 F HEAVY DUTY PS $ 11,684.00 41.0% 6,893.56$ Yes SPO10-TRIO-FA EH1 SPO10N1605BL 2 Post Symmetric Lift With TRIO Flip Up Adapters EH1 0 LIGHT DUTY PS $ 12,114.00 41.0% 7,147.26$ Yes SPO10-TRIO-FA EH2 SPO10N1607BL 2 Post Symmetric Lift With TRIO Flip Up Adapters EH2 0 LIGHT DUTY PS $ 13,043.00 41.0% 7,695.37$ Yes EXHIBIT 1
5 (Rev. 9.30.22)
EXHIBIT B
INSURANCE REQUIREMENTS
EXHIBIT 1
6 (Rev. 9.30.22)
EXHIBIT C
EXHIBIT 1
Quote # : Prepared By:
Date:
Requested By: *If completion of installation is delayed more Quote Expires: than one month due to governmental entity Payment Terms: delays (i.e. electrical, etc.), Rotary can request Warranty: partial payment for work completed.
(both equipment and installation).
Note:
Project Name:
Model No. Description Per Unit Price Qty. Extended Price MCHM619U100BK 79,529.64$ 2 159,059.28$
SPO16N1T0BL 2-Post Symmetric Lift 16,000 lb Capacity w/All TRIO Arms 21,693.12$ 2 43,386.24$ FA845-MCH-KIT MACH FLEX Remote Controller, and Dock Kit 2,633.00$ 2 5,266.00$ XXX01CTT Installation 78,977.80$ 1 78,977.80$
**Please See Attached Scope of Work**
Freight Prepaid by Rotary Lift
*Does not include any applicable sales tax
Total Price: 286,689.32$
ADDITIONALTERMS AND CONDITIONS: By submitting a purchase order to Vehicle Service Group, LLC. (VSG), customer accepts and agrees to these terms and conditions as additional terms to the extisting agreement between the parties referenced on the face of this quotation (Existing Agreement), notwithstanding anything to the contrary contained therein.
All additional or different terms and conditions contained in Customer's purchase order are hereby rejected. No additional or different terms or conditions, or any modifications, changes, or amendments to these terms of the existing agreement shall be binding on VSG, unless expressly accepted by VSG in writing.
DISCLAIMER: Notwithstanding anything to the contrary in the Existing Agreement, VSG shall not be liable for any loss, damage or additional costs arising from unforeseen conditions affecting installation, including but not limited to contaminated soil, bed rock, in-floor heating system, high water conditions, or any othertype of in-ground conditions. Customer acknowledges and agrees that Customer shall be responsible for any additional costs due to such conditions, in addition to the installation price set forth herein.
DELAY: Notwithstanding anything to the contrary in the Existing Agreement, if delivery of the equipment or completion of the work is delayed by more than thirty (30) days due to the acts or ommission of Customer or any third party other than VSG or its sub- contractors, VSG may require Customer to render payment for equipment manufactured or delivered, and portions of the work completed, within thirty (30) days from the date of VSG's invoice, in the amounts set forth in such invoice. *Cancelled orders or returned goods are subject to 20% restocking fee Master Agreement:CW7254 Rotary Lift
CAGE #: 7K311 2700 Lanier Dr.
Tax ID #: 90-0501347 Madison, IN 47250
DUNS #: 00-638-2634 Tammy Boldery, Government Sales Leader 800.445.5438 x 5655
[email protected]
Portable (6) Column Lift W/Remote Control Operation 112,800 lb Capacity Quote for Equipment
City of Stockton, CA
Tammy Boldery
Vehicle Service Group
NASPO ValuePoint
Equipment Quotation
2024451
8/9/2024
Alanna Bindi
12/7/2024
1/2%-15th,NET 30
1yr. Parts & Labor
EXHIBIT 1
EXHIBIT 1
EXHIBIT 1
EXHIBIT 1
EXHIBIT 1