Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
DRYVIT—OUTSULATION
HOW IT WORKS
Outsulation systems typically consist of the following components, as determined by code and performance requirements.
DRYVIT/TREMCO APPROVED
WATER-RESISTIVE BARRIER
Seamlessly protects sheathing or
substrate from incidental
moisture and
eliminates air infiltration
•
Liquid-applied
• Continuous or monolithic
• Includes Backstop NTX®,
Back
stop NTX-VB, Securock®
Ex
oAir® 430, ExoAir® 230
CONTINUOUS INSULATION
Absorbs expected building
movement and enhances energy
efficiency
•
Eliminates thermal bridging in
framed cons
truction
• Meets CI requirement
s for all
zones per ASHRAE 90.1-2010
• Available in both EPS
(e
xpanded polystyrene)and XPS
(extruded polystyrene)
• Available in various
thicknes
ses and can fully meet
wall insulation requirements
BASE COAT AND REINFORCING MESH
Combine to provide the primary weather
barrier and impact resistance
• Mesh embedded in base coat
• Various weights of mesh av
ailable,
depending on impact resistance required
DRYVIT/TREMCO APPROVED
FLASHING SYSTEM:
Seamlessly protects openings
in the building envelope from
moisture
•
Includes AquaFlash® or
Dymonic® 100
ADHESIVE / DRAINAGE MEDIUM
Vertical notches allow drainage of
incidental moisture
• Adheres insulation board to
the Air
-and Water-Resistive
Barrier\
FINISH COAT
Blend of 100 percent acrylic
copolymers, natural aggregates
and UV resistant pigments
•
Easy to maintain
• Available in many t
extures and
limitless color options
• Offer multiple aesthetic options
• Options for increased
hy
drophobicity, flexibility and
mildew and fade resistance
SYSTEM OPTIONS
All Outsulation systems include adhesive, continuous insulation (CI), fiberglass mesh embedded in base coat, and finish, which are installed sequentially by a trained professional contractor as specified by the design team, and as required by code. Some Outsulation systems protect the underlying wall with an air- and water-resistive barrier under the CI, which maximizes the energy efficiency. Outsulation systems can be installed in either “barrier,” “moisture drainage” or “pressure equalized” configurations, and these systems are engineered to perform in all climates and on all types of structures. On certain types of construction (high-rise) and in certain job conditions (cold weather), lift-in-place, prefabricated wall sections may provide certain benefits.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
DRYVIT—MODULITE™ PREFABRICATED PANEL SYSTEMS
Whether you’re building new or renovating, Modulite prefabricated panel systems offer unique advantages over traditional field-applied construction.
Since 1970, Dryvit has offered systems and technical support for the prefabrication space using all of the Dryvit products.
Modulite panelization systems incorporate all the benefits of a Dryvit Outsulation® system—including continuous insulation (CI) and beautiful aesthetic finish options to meet any design need—all fully-tested to meet existing building codes and provide extraordinary energy efficiency. Modulite panelization systems also offer the most experienced and deepest team of partner fabricators in the industry.
Why build with Modulite Prefabricated Panes?
Faster Construction Time
In-plant fabrication can reduce production time, and speed up field application of exterior cladding systems, to reduce construction schedules.
Stronger and More Resilient
Our systems are designed for maximum durability, many with service lives far surpassing that of competing systems.
Cost-Effective for the Long Term
A broad range of products can fit most project budgets — but our energy-efficiency and maintenance solutions can also help you ensure cost-effective ownership and operation for the long term.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
DRYVIT—MODULITE™ PREFABRICATED PANEL SYSTEMS
One Point of Contact
Our products and systems are backed by industry-leading warranties — all from a single point of contact. We can also help with everything from asset
management to diagnostics to installer training.
Any Look You Want
A wide range of colors and finishes like brick, granite, metals, stucco and more provide maximum flexibility in
your façade aesthetic.
Avoid Labor Shortage Problems
Pre-fabricated Dryvit panels can help address ongoing
shortages in the skilled labor force—while simultaneously maximizing quality control.
Better Insulated
Industry-leading Outsulation
® continuous insulation
means efficient construction and operation, and will
exceed strict energy codes for insulation.
Leading Edge Sustainability
Our building solutions help you reduce waste, and meet
green building standards like Net Zero, Living Building Challenge, Passive House and more.
Fedderlite® /
Fedderlite® M
Prefabricated
Exterior Wall
Insulation and
Finish Systems
for Use over
Solid Substrates
Metalite
®
Prefabricated
Panelization
System Installed
over a Proprietary
Light-Gauge
Metal Pan
Outsulite
® / Outsulite®
Exoair® 430
Industry-Leading
Panel Systems with
Dryvit Outsulation and
an Air/Water Resistive
Barrier
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
PREBUCK—ENGINEERED FRAMING SYSTEMS
A new era has arrived. A construction revolution:
strength and quality combined with speed and efficiency.
Prebuck technology now offers the strongest, fastest,
and smartest construction solutions available. Save
time and money while building superior durability into
every project.
Specifically designed for direct contact with concrete
and non-corrosive to metals, Prebuck products feature
TimberStrand Strandguard (LSL) engineered lumber
treated with zinc borate for exceptional resistance to
insects and decay. Prebuck products also feature MDI
resin, the 100% waterproof bonding agent that turns to
a durable plastic when cured.
Combine these quality components with Prebuck’s
advanced engineering and you’re guaranteed the most
efficient construction technology available today.
BENEFITS FOR RESIDENTIAL AND COMMERCIAL
CONSTRUCTION
•
Designed for direct cont
act with concrete
• Non corrosive t
o metals
• Resistant t
o insects and decay
• Will not delaminate, become spongy, or l
ose fastener
holding strength when exposed in typical commercial
construction.
• Will not cup, warp or twist ov
er time
• Engineered consistent, flat,
s
table framing material
• LSL bending strength
minimizes need for internal
br
acing before concrete
pour
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
PREBUCK—ENGINEERED FRAMING SYSTEMS
Parapet Cap
Prebuck engineered solutions for your parapet blocking allow the contractor to leverage the speed and efficiency of custom designed components. On new construction or renovations Prebuck solutions provides sustainable and dependable results to extend the life of your structure.
•
Laser straight, will not curl, cup, or
warp
• Can be installed by f
ewer employees
saving labor costs
• Colored coded f
or easy placement
• Counter sunk holes to hide f
asteners
• Customizable
• Designed for direct contact with
c
oncrete
• Insect and fungus resistant
• Environmentally friendl
y
• Contributes to LEED points
Window & Door Buck
Offers the contractor, owner and design community an engineered solution for punched openings. Produced with 1-½” (38 mm thick, treated Laminated Strand Lumber (LSL), Gives the rough frame of the opening stable support for glazing and finish components. A cast in place version integrates a dual keyway design to assure a secure interface from concrete to finishes.
•
Self aligns on the wall for easy
ins
tallation
• Will not delaminate, become spongy, or
l
oosen fastener strength
• Colored coded f
or easy placement
• Will not curl, twist, cup, or warp
• Customizable
• Designed for direct contact with
c
oncrete
• Insect and fungus resistant
• Environmentally friendl
y
• Contributes to LEED points and NAHB
Gr
een Building Certified
Wet-Set Sill
Produced with 1 ½” (38 mm) thick, treated Laminated Strand Lumber (LSL) our sill solution is produced straight and stays straight. Our sill plate solution is designed to fit ICF wall widths and using our oblong countersunk holes lets the contractor set the sill plate the same day they pour the walls.
•
LSL bending strength minimizes need
for int
ernal bracing before concrete
poor
• Will not delaminate, become spongy, or
l
oosen fastener strength
• Oblong counter
sunk opening
• Will not curl, twist, cup, or warp
• Designed for direct contact with
c
oncrete
• Non-corrosive t
o metals
• Insect and fungus resistant
• Environmentally friendl
y
• Contributes to LEED points and NAHB
Gr
een Building Certified
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
Willseal offers best-in-class pre-compressed and acrylic- impregnated foam products for horizontal and vertical
joint applications. Tremco’s industry-leading joint sealants, polyurethane-methacrylate technology, pre-formed
extrusions and gun-grade foams.
With a wide variety of pre-compressed, acrylic-impregnated foams, pre-formed extrusions, monolithic Polyurethane
Methacrylate and gun-grade foams, Willseal and Tremco
have the ideal solution for any expansion joint or transition sealant project.
Whether you require traffic-grade horizontal, color-
matched vertical, 2 to 3 hour fire-rated, seismic capabilities, waterproof, soundproof, dust-proof or airtight seals, you’ll find a variety of options in the following pages.
All products, however, feature unmatched quality and
durability, excellent +/- movement capabilities, and
innovative, streamlined installations designed to help create safer, greener, high-performance structures. For over
110 combined years, our products have been continuously specified and installed on thousands of new construction and restoration projects worldwide.
Willseal products are designed for maximum waterproofing, thermal, sound, and air-tightness to meet global passive housing standards and feature superior durability, excellent +/- movement capabilities, and streamlined installation.
MARKETS SERVED
•
Commercial
construction
• Industrial /
manufacturing
•
Educational and
institutional
•
Infrastructure and DO
T
• Residential construction
• Stadiums and arenas
• Parking facilities
• Medical facilities
• Fire protection
VALUE ADD
WILLSEAL—EXPANSION JOINT SYSTEMS
JOINT APPLICATIONS:
• Traffic-grade horizont
al joints
• Primary vertical joints
• Curtain walls, windows, &
flashing
• Control, longitudinal and
trans
verse joints
• Dryvit® and exterior panel
system joints
• Pre-cast c
oncrete & built-up
walls
• Fire-rated joint
s
• Seismic, large & retrofit joint
s
• Below-grade applic
ations
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
Stonhard, a subsidiary of our parent company
RPM International, is the unprecedented leader
in manufacturing and installing high performance
floors. Joining form and function, our floors are the
dependable go-to choice for tough manufacturing
environments, while still honoring innovative design for commercial environments.
From specifications and design to final walkthrough, you work with us directly. For a century we’ve been delivering proven, single-source service, covering both your
products and installation.
Stonhard is committed to manufacturing and installing
quality, seamless products that protect, maintain and
enhance industrial and commercial environments.
Quality From Start to Finish
With a century in business, Stonhard is the
unprecedented leader in manufacturing and installing
high performance epoxy and urethane floor, wall and
lining systems.
Manufacture & Install
We work with you directly—formulating and installing
long-term floor, wall and lining system solutions.
Perform & Protect
Chemical, slip, and stain resistant epoxy, urethane and MMA floors protect work environments from chemical
VALUE ADD
STONHARD
attack, impact, abrasion, thermal cycling, along with daily wear and tear.
Define & Design
Market specific color collections, tailor-made logos, custom colors and textures that dignify great design.
Sustainability.
Green is nothing new for Stonhard. For over 30 years,
Stonhard has been an innovator in sustainable products.
Since June of 2005, through recycling efforts, Stonhard has prevented 92.7% of all returned material, including discontinued and obsolete products from going into the
waste stream. Stonhard’s unique packaging prevents over
4.8 million one gallon pails and quart cans from being
dumped into landfills annually.
OUR FACILITIES ARE GREEN
Stonhard has eliminated the use of chromic oxide (a
chromium compound) as a green pigment in several
Stonhard aggregate products, which has made these
products environmentally friendly (non-hazardous).
NEW PRODUCT DEVELOPMENT
Over 90% of new product development and reformulation
efforts have been geared to water-based urethanes or 100% solid epoxy-based chemistry. This effort not only provides safer floor and coating products to both industrial and commercial markets, it also reduces hazardous waste.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
FLOWCRETE TREMFLOOR™ URETHANE CEMENT FLOORING
TREMfloor™ Urethane Cement: Anti-Microbial
Cementitious Urethane Flooring
Proving that a building is able to meet a high standard of hygiene is essential in many sectors, especially
contamination-sensitive settings such as the food and
beverage, pharmaceutical and electronics industries.
TREMfloor™ is a leading line of Hazard Analysis and Critical Control Point (HACCP) International-certified, antimicrobial- treated cementitious urethane flooring systems for use in a wide variety of these, and other, applications.
The key aspects of TREMfloor that make it an ultra-hygienic flooring system include its seamless, impervious, highly durable nature combined with its ability to incorporate coving and stainless steel drainage. TREMfloor even includes the natural silver-ion based antibacterial agent Polygiene
®,
which has been proven to meet the ISO 22916 standard.
While initially designed for the food and beverage industry, many other sectors such as healthcare are turning to
HACCP International-certified building materials, as they need systems that can create a highly-sanitary working
environment, able to withstand difficult working conditions.
Products
TREMfloor Urethane
Cement HF (1/4”)
A HACCP International
certified urethane cement
system with a textured
semi-gloss finish, ideal for
wet environments prone to
spills.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
TREMfloor Urethane
Cement RT (1/4”)
A HACCP certified
urethane cement system
with a textured matte
finish, ideal for areas
where high performance is
a requirement.
TREMfloor Urethane
Cement SR (1/4”)
A HACCP certified urethane
cement system with a
textured matte finish, ideal
for wet areas.
TREMfloor Urethane
Cement MF (3/16”)
A HACCP International
certified urethane cement
system with a matte finish.
TREMfloor Urethane
Cement SL (1/8”)
A HACCP International
certified urethane cement
system with a smooth matte
finish. Broadcast and seal
for wet areas as well.
TREMfloor Urethane
Cement Cove
A HACCP certified urethane
cove mortar system,
for any TREMfloor™
flooring system. Provides
a seamless, hygienic
transition between the floor
and wall.
VALUE ADD
FLOWCRETE TREMFLOOR™ URETHANE CEMENT FLOORING
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
PUMA TECHNOLOGY SYSTEMS
Vulkem® EWS Traffic Coatings and TREMproof®
Below-Grade Waterproofing Membranes with Tremco
Polyurethane-Methacrylate (PUMA) Technology
These systems feature superior durability and abrasion
resistance, exceptional crack-bridging, tenacious adhesion and fast cure — opening to traffic in as little as one hour after installation. Tremco PUMA technology systems can be applied in temperatures as low as 14
o
F (-10
o
C).
• Tremco PUMA Primer - A methyl-methacrylate (MMA), two- component primer for por
ous and non-porous substrates.
• TREMprime® VB - A two-component, epoxy
-based solvent-
free vapor barrier primer for concrete surfaces.
• Tremco PUMA Initiat
or+ - A reactive catalyst in the form of a
white powder used to cure all resins of Vulkem® EWS and TREMproof® PUMA.
•
Tremco PUMA BC - A pol
yurethane-methacrylate (PUMA) base
coat that bonds firmly to Tremco PUMA Primer and retains its integrity regardless of substrate movement up to 1/16”.
Available in self-leveling, roller, trowel and low-modulus grade. •
Tremco PUMA Flashing - A pol
yurethane-methacrylate (PUMA)
base coat that bonds firmly to Tremco PUMA Primer, and is compatible with Tremco’s TREMproof® 6100.
•
Tremco PUMA W
C - A polyurethane-methacrylate (PUMA)
wear coat, loaded with aggregate to give the system excellent impact, abrasion and chemical resistance.
•
Tremco PUMA Fill
er Powder - A non-reactive, white, filler
powder used to thicken Tremco PUMA WC.
• 16 to 20 mesh silica sand, col
or quartz, aluminum oxide
(bauxite) - Used in conjunction with PUMA Primer, PUMA WC and PUMA TC. (Supplied by others.)
•
Tremco PUMA T
C - A methyl-methacrylate (MMA) top coat that
offers excellent abrasion resistance, UV stability and chemical resistance system. Available in variety of colors.
Components of Vulkem® EWS traffic coating systems, and
TREMproof® PUMA below-grade waterproofing systems.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremcocpg.com
Roofing Products, Services, and
Job-Order-Contracting (JOC) Services
Solicitation No. 23-04
VALUE ADD
PUMA TECHNOLOGY SYSTEMS
HELIPAD SYSTEM
Durable Solution with Custom Color
Options
Vulkem EWS is an optimal solution
for helipads. Vulkem EWS is a cold-
applied, traffic deck coating system
designed for waterproofing concrete
slabs and protecting occupied areas
underneath from water damage.
DECORATIVE WATERPROOFING
SYSTEM
Aesthetically Appealing Solution with
Extreme Durability
Ideal for pedestrian walkways,
balconies, deck and plaza common
areas—can match any aesthetic with
a variety of UV-stable aggregate or
chips.
HYBRID SYSTEM: URETHANE
Vulkem Urethanes for Driving Lanes
and Parking Stalls
Our hybrid system incorporates
Vulkem EWS for extreme-wear
areas such as helical turns, ramps
and ticket spitters — with Vulkem
Polyurethane Vehicular Systems for
drive lanes and parking stalls.
VEHICULAR SYSTEM
Parking Structures, High-Wear Turn
and Drive Lanes, Helical Turns,
The ideal system for parking
structures, high-wear turn and drive
lanes, helical turns, ramps and ticket
spitters. Protects from the damaging
effects of chloride, deicing salts,
chemicals, gasoline, oils and anti-
freeze.
HYBRID SYSTEM: EWS
For Helical Turns, Ramps and Ticket
Spitters
Our hybrid system incorporates
Vulkem EWS for extreme-wear
areas such as helical turns, ramps
and ticket spitters — with Vulkem
Polyurethane Vehicular Systems for
drive lanes and parking stalls.
PEDESTRIAN SYSTEM
Stadiums, Balconies and Pool Decks
A cold-applied system ideal for
stadiums, balconies and pool decks—
protecting concrete below from the
damaging effects of chloride, deicing
salts, chemicals, gasoline, oils, anti
freeze and more.
ATTACHMENT A
EXHIBIT A
3735 GREEN ROAD, BEACHWOOD, OH 44122
www.tremco.com
THANK YOU
FOR THE OPPORTUNITY TO PROPOSE ON THIS PROJECT
ATTACHMENT A
EXHIBIT A
REV 2025-06-04
Exhibit B:
Insurance Requirements
(Roofing)
C
ontractor shall procure and maintain for the duration of the contract, and for five (5) years thereafter, insurance against claims for injuries to persons or damages to property which may arise from or in connection with the performance of the work hereunder by the Contractor, his agents, representatives, employees, or subcontractors.
MIN
IMUM SCOPE AND LIMIT OF INSURANCE
C
overage shall be at least as broad as:
1. C
ommercial General Liability (CGL): Insurance Services Office (ISO) Form CG 00 01 covering CGL on an “occurrence” basis, including products and completed operations, property damage, bodily injury and personal & advertising injury with limits no less than $5,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this project/location (ISO CG 25 03 or 25 04) or the general aggregate limit shall be twice the required occurrence limit.
2. A
utomobile Liability: Insurance Services Office Form CA 0001 covering Code 1 (any auto), with limits no less than $2,000,000 per accident for bodily injury and property damage.
3. W
orkers’ Compensation insurance as required by the State of California, with Statutory Limits, and Employers’ Liability insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.
4 . Surety Bonds as described below.
I
f the contractor maintains broader coverage and/or higher limits than the minimums shown above, the City of Stockton requires and shall be entitled to the broader coverage and/or the higher limits maintained by the contractor. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to the City of Stockton.
Self -Insured Retentions
S
elf-insured retentions must be declared to and approved by the City of Stockton. The City of Stockton may require the Contractor to purchase coverage with a lower retention or provide proof of ability to pay losses and related investigations, claim administration, and defense expenses within the retention. The policy language shall provide, or be endorsed to provide, that the self-insured retention may be satisfied by
ATTACHMENT A
EXHIBIT B
REV 2025-06-04
either the named insured or City of Stockton. The CGL and any policies, including Excess liability policies, may not be subject to a self-insured retention (SIR) or deductible that exceeds $25,000 unless approved in writing by City of Stockton. Any and all deductibles and SIRs shall be the sole responsibility of Contractor or subcontractor who procured such insurance and shall not apply to the Indemnified Additional Insured Parties. City of Stockton may deduct from any amounts otherwise due Contractor to fund the SIR/deductible. Policies shall NOT contain any self-insured retention (SIR) provision that limits the satisfaction of the SIR to the Named Insured.
The policy must also provide that Defense costs, including the Allocated Loss Adjustment Expenses, will satisfy the SIR or deductible. City of Stockton reserves the right to obtain a copy of any policies and endorsements for verification.
O
ther Insurance Provisions
T
he insurance policies are to contain, or be endorsed to contain, the following provisions:
1. T
he City of Stockton, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of work or operations performed by or on behalf of the Contractor including materials, parts, or equipment furnished in connection with such work or operations and automobiles owned, leased, hired, or borrowed by or on behalf of the Contractor.
General liability coverage can be provided in the form of an endorsement to the Contractor’s insurance (at least as broad as ISO Form CG 20 10 11 85 or both CG 20 10, CG 20 26, CG 20 33, or CG 20 38; and CG 20 37 forms if later revisions used).
Additional insured Name of Organization shall read “City of Stockton, its officers, officials, employees, and volunteers.” Policy shall cover City of Stockton, its officers, officials, employees, and volunteers for all locations work is done under this contract.
2. F
or any claims related to this project, the Contractor’s insurance coverage shall be primary and non-contributory insurance coverage at least as broad as ISO CG 20 01 04 13 as respects the City of Stockton, its officers, officials, employees, and volunteers. Any insurance or self-insurance maintained by the City of Stockton, its officers, officials, employees, or volunteers shall be excess of the Contractor’s insurance and shall not contribute with it. This requirement shall also apply to any Excess or Umbrella liability policies. The City of Stockton does not accept endorsements limiting the Contractor’s insurance coverage to the sole negligence of the Named Insured.
3. E
ach insurance policy required by this clause shall provide that coverage shall not be canceled, except with notice to the City of Stockton.
Claims Made Policies – (Professional & Pollution only)
If any coverage required is written on a claims-made coverage form:
ATTACHMENT A
EXHIBIT B
REV 2025-06-04
1. T
he retroactive date must be shown, and this date must be before the execution date of the contract or the beginning of contract work.
2. I
nsurance must be maintained and evidence of insurance must be provided for at least five (5) years after completion of contract work.
3. I
f coverage is cancelled or non-renewed, and not replaced with another claims- made policy form with a retroactive date prior to the contract effective, or start of work date, the Contractor must purchase extended reporting period coverage for a minimum of five (5) years after completion of contract work.
4. A
copy of the claims reporting requirements must be submitted to the City of Stockton for review.
5. I
f the services involve lead-based paint or asbestos identification/remediation, the Contractors Pollution Liability policy shall not contain lead-based paint or asbestos exclusions. If the services involve mold identification/remediation, the Contractors Pollution Liability policy shall not contain a mold exclusion, and the definition of Pollution shall include microbial matter, including mold.
Umbrella or Excess Policies
The Contractor may use Umbrella or Excess Policies to provide the liability limits as required in this agreement. This form of insurance will be acceptable provided that all of the Primary and Umbrella or Excess Policies shall provide all of the insurance coverages herein required, including, but not limited to, primary and non-contributory, additional insured, Self-Insured Retentions (SIRs), indemnity, and defense requirements. The Umbrella or Excess policies shall be provided on a true “following form” or broader coverage basis, with coverage at least as broad as provided on the underlying Commercial General Liability insurance. No insurance policies maintained by the Additional Insureds, whether primary or excess, and which also apply to a loss covered hereunder, shall be called upon to contribute to a loss until the Contractor’s primary and excess liability policies are exhausted.
Acceptability of Insurers
Insurance is to be placed with insurers authorized to conduct business in the state with a current A.M. Best rating of no less than A: VII, unless otherwise acceptable to the City of Stockton.
Waiver of Subrogation
Contractor hereby agrees to waive rights of subrogation which any insurer of Contractor may acquire from Contractor by virtue of the payment of any loss.
Contractor agrees to obtain any endorsement that may be necessary to affect this
ATTACHMENT A
EXHIBIT B
REV 2025-06-04
waiver of subrogation. The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of the City of Stockton for all work performed by the Contractor, its employees, agents and subcontractors.
Verification of Coverage
C
ontractor shall furnish the City of Stockton with original certificates and amendatory endorsements or copies of the applicable policy language effecting coverage required by this clause and a copy of the Declarations and Endorsements Pages of the CGL and any Excess policies listing all policy endorsements. All certificates and endorsements and copies of the Declarations & Endorsements pages are to be received and approved by the City of Stockton before work commences. However, failure to obtain the required documents prior to the work beginning shall not waive the Contractor’s obligation to provide them. The City of Stockton reserves the right to require complete, certified copies of all required insurance policies, including endorsements required by these specifications, at any time. City of Stockton reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other special circumstances.
Subcontractors
Contractor shall require and verify that all subcontractors maintain insurance meeting all requirements stated herein, and Contractor shall ensure that City of Stockton is an additional insured on insurance required from subcontractors. For CGL coverage, subcontractors shall provide coverage with a form at least as broad as CG 20 38 04 13.
Duration of Coverage
CGL & Excess liability policies for any construction related work, including, but not limited to, maintenance, service, or repair work, shall continue coverage for a minimum of 5 years for Completed Operations liability coverage. Such Insurance must be maintained and evidence of insurance must be provided for at least five (5) years
after completion of the contract of work .
Surety Bonds
Contractor shall provide the following Surety Bonds:
1. B
id Bond
2. P
erformance Bond
3. P
ayment Bond
4. M
aintenance Bond
ATTACHMENT A
EXHIBIT B
REV 2025-06-04
The Payment Bond and the Performance Bond shall be in a sum equal to the contract price. If the Performance Bond provides for a one-year warranty a separate Maintenance Bond is not necessary. If the warranty period specified in the contract is for longer than one year a Maintenance Bond equal to 10% of the contract price is required. Bonds shall be duly executed by a responsible corporate surety, authorized to issue such bonds in the State of California and secured through an authorized agent with an office in California.
Special Risks or Circumstances
City of Stockton reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other circumstances.
C
ertificate Holder Address
T
he address for mailing certificates, endorsements and notices shall be:
C
ity of Stockton
Its Officers, Officials, Employees and Volunteers
425 N El Dorado Street
Stockton, CA 95202
ATTACHMENT A
EXHIBIT B
WEATHERPROOFING TECHNOLOGIES, INC.
CPN CONTRACT # CA-R230404-319719
Effective Date: 11/01/2023
CONFIDENTIAL
Name CITY OF STOCKTON
Description MUD METAL ROOF RETROFIT-MUD BLDG
Quote # 5063300
Date 2/27/2026
Line Item # Description Unit of Measure Unit Price Quantity Project Amount VA217 General Laborer (Mobilization & Demobilization) Hour 164.66$ 60 9,879.60$ VA77 Sweep loose aggregate, debris from Substrate SF 0.49$ 15,356 7,524.44$ VA72 Installation of new Polyisocyanurate insulation
VA72a Mechanically attached BF 1.88$ 11,517 21,651.96$
19 CDX Gypsum, 1/4" x 4' x 8'
19a Mechanically attached SF 1.13$ 15,356 17,352.28$
VA211
Installer (FLASHINGS, PIPE BOOTS, PITCH POCKET,
NAILER, PUMA SCOPE) Hour 187.11$ 280 52,390.80$
SUBTOTAL 108,799.08$
VA121 Multiplier for roofs less than 20,000 square feet % 15% 108,799.08$ 16,319.86$ 47g Difficult access or fall restriction; surcharge % 15% 108,799.08$ 16,319.86$ 505215 501 TPA ACCESSORY LARGE BOOTS CS 1,118.43$ 1 1,118.43$ 550220 503 TPA UNIVERSAL CORNERS WHITE/GRAY CS 472.52$ 1 472.52$ 505210 501 TPA ACCESSORY SMALL BOOTS CS 984.91$ 1 984.91$ 505262 503 TPA 60 MIL PERIMETER SHEET 39" X 90' ROLL 1,659.44$ 14 23,232.16$ 505240A 503 TPA 45 MIL COVER STRIP 6" x 108' ROLL 343.33$ 1 343.33$ 505255WG503 TPA 55 MIL UNREINFORCD 24" X 30' WHT/GRY ROLL 765.56$ 1 765.56$ 505415 503 TPA WALKWAY ROLL 72 MIL GRAY 3' x 60' ROLL 1,361.19$ 1 1,361.19$ 351910 802 ALPHAGUARD PUMA TOP COAT WHITE EA 599.10$ 6 3,594.60$ 48a
Additional and occasional services Roofing supplies Discount off Retail Price List % 13.3%
VA208 Building/Construction Manager Hour 218.76$ 22 4,812.72$ 46t
Project site is located 65 or more miles from the
contractor's/subcontractor's yard/home location. SF 2.11$ 15,356 32,401.16$ Termination bar & pitch pockets LS 1,700.00 $ 1 1,700.00$ VA123 Multiplier - Construction Distributor Material for Repair Work Multiplier 1.15 1,700 1,955.00$
VA27 20 Year Replacement Warranty Over 10,000 Feet,
Inspections in Year 2, 5, 10 and 15 (no maintenance) SF 0.16$ 15,356 2,456.96$ 48d Multiplier/factor to be applied to the R.S. Means costs. % 93% 216,456.60$ 201,304.64$ SUBTOTAL 416,241.98$
FREIGHT PREPAID & ADD: N/A
57b Performance and payment bond - bonding rate (percent of project) % 0.40% 1,664.97$
TOTAL PROJECT COST 417,906.95$
*The pricing contained in this proposal is based in part on site- specific conditions and unique circumstances presented on each individual project as per Contract #R230404.
This price is valid for 60 days. After that time, project conditions are subject to reassessment.
ATTACHMENT A
EXHIBIT C
BOND FOR FAITHFUL PERFORMANCE
KNOW ALL MEN BY THESE PRESENTS:
That
we, WEATHERPROOFING TECHNOLOGIES, INC. , a STATE OF OHIO CORPORATION, as Principal and ,a
corporation, organized and existing under the laws of the State of and duly authorized to transact business under the laws of the State of California, as Surety, are held and firmly bound unto the City of Stockton, a municipal corporation, duly created and existing under and by virtue of the laws of the S tate of California, as obligee, in the just and full sum of FOUR HUNDRED S EVENTEEN THOUSAND NINE HUNDRED SIX AND 95/100 DOLLARS ($417,906.95), in lawful money of the United States of America (being 100% of the contract price) for the payment whereof well and truly to be made to the said CITY, the said Principal and Sure ty bind themselves, their successors and assigns, jointly and severally, firmly by these presents.
The condition of the foregoing obligation is such that the above bounded Principal has simultaneously entered into a contract with the CITY, to do and perform the following work, to wit:
REGIONAL WASTEWATER CONTROL FACILITY MAINTENANCE BUILDING ROOF
REPLACEMENT
(PROJECT NO. UW26007)
NOW, THEREFORE, if the above bounde d Principal, CONTRACTOR, Company or
Corporation or its subcontract or, shall well and truly perform the work contracted to be done under said contract, then this obligation to be null and void ; otherwise to remain in full force and effect.
No prepayment or delay in payment and no change, extension, addition or alteration of any provision of said contract, or in said plans or specifications agreed to between the said CONTRACTOR and the said CITY, and no forbearance on the part of the said CITY shall operate to relieve any Surety or Sureties from liability on this bond, and consent by said Surety is hereby given, and the said Surety hereby waives the provisions of Sections 2819 and 2845 of the Civil Code of the State of California.
SIGNED AND
SEALED on
APPROVED AS
TO SURETY: By:
P R I N C I P A L
S U R E T Y
APPROVED AS TO FORM & CONTENT:
MARCI A. ARREDONDO
OFFICE OF THE CITY ATTORNEY
B y :
A T T O R N E Y - I N - F A C T
B y
:
CITY ATTORNEY
BOND FOR LABOR AND MATERIAL
KNOW ALL MEN BY THESE PRESENTS:
That we, WEATHERPROOFING TECHNOLOGIES, INC. , a STATE OF OHIO CORPORATION, as Principal and , corporation,
organized and existing under the laws of the State of and duly authorized to transact business under the laws of the State of California, as Surety, are held and firmly bound unto the City of Stockton, a municipal corporation, duly created and existing under and by virtue of the laws of the State of Californi a, and unto any and all material suppliers, persons, companies, or corporations furnishing materials, provisions, provender or other supplies used in, upon, fo r or about the performance of the work contemplated to be executed or performed under the contract hereinafter mentioned, and all per sons, c ompanies, or c orporations rent ing or hiring teams, or implements of machinery, for or contributing to said work and all persons who perform work or labor upon the same, and all persons who supply both work and materials, and whose claims have not been paid by the contractor, company or corporation in the just and full sum of FOUR HUNDRED SEVENTEEN THOUSA ND NINE HUNDRED SIX AND 95/100 DOLLARS ($417,906.95) in lawful m oney of the United Stat es of America (being 100% of the contract price) for the payment whereof well and truly to be made to said CITY and to said persons jointly and severally, the said principal and Surety bind themselves, their successors and assigns, jointly and severally, firmly by these presents.
The condition of the foregoing obligations is such that the above bounden Principal has simultaneously entered into a contrac t of even date herewith, wit h the CITY, to do and perform the following work, to-wit:
REGIONAL WASTEWATER CONTROL FACILITY MAINTENANCE BUILDING ROOF
REPLACEMENT
(PROJECT NO. UW26007)
NOW, THEREFORE, if the abov e bounden Principal, CO NTRACTOR, Company or Corporation or its subcontractor, fail to pay for all materials, provisions, provender, or other supplies , or team s, us ed in, upon, for or about the performance of the work contracted to be done, or for any work or la bor done thereon of any kind, the Surety on this bond will pa
y the same, in an amount not exceeding the sum specified in this bond, provided that any and all claims hereunder shall be filed and pr oceedings had in connection therewith as required by the provisions of Division 3, Part 4, Title 15, Chapter 5, Article 1 of the Civil Code of California, provided that in case suit is brought upon this bond, a reasonable attorney's fee shall be awarded by the Court to the prevailing party in said suit; said attorney's fee to be fixed as costs in said suit, and to be included in the judgment therein rendered.
No prepayment or delay in payment and no change, extension, addition or alteration of any provision of said contract or in said plans or specifications agreed to between the said CONTRACTOR and the said CI TY and no forbearance on the part of the said CITY shall operate to relieve any sure ty or sureties from liability on this bond, and consent to make such alterations without further notice to or consent by any such surety is hereby given, and the said sureties hereby waive the provisions of Sections 2819 and 2845 of the Civil Code of the State of California.
S I G N E D A N D S E A L E D o n .
APPROVED AS
TO SURETY: By:
P R I N C I P A L
S U R E T Y
APPROVED AS TO FORM & CONTENT:
MARCI A. ARREDONDO
OFFICE OF THE CITY ATTORNEY
B y :
A T T O R N E Y - I N - F A C T
B y
:
CITY ATTORNEY