DRAFT GENERAL CONSTRUCTION CONTRACT
THIS CONTRACT dated _________________ is by and between the CITY OF SUNNYVALE, a California chartered municipal corporation of the State of California ("Owner") and VSS INTERNATIONAL, INC. , a California corporation ("Contractor").
RECITALS:
The parties to this Contract have mutually covenanted and agreed, as follows:
1. The Contract Docume nts. The complete Contract consists of the following documents: Notice Inviting Bids; Instructions to Bidders; Performance Bond and Payment Bond; Guaranty; City of Sunnyvale Standard Specifications for Public Works Construction, 2006 Edition; City of Sunnyvale Standard Details for Public Works Construction, 2006 Edition; Plans and Specifications, "Java Drive Road Diet and Bike Lanes, Project No. TR- 21-03, Invitation for Bids No. PW22-13", OSHA, and other standards and codes as outlined in the Specifications. These documents are all incorporated by reference. The documents comprising the complete contract are collectively referred to as the Contract Documents.
Any and all obligations of the Owner and the Contractor are fully set forth and described therein .
All of the above documents are intended to work together so that any work called for in one and not mentioned in the other or vice versa is to be executed the same as if mentioned in all documents.
2. The Work. Contractor agrees to furnish all tools, equipment, apparatus, facilities, labor, transportation, and material necessary to perform and complete the project in a good and workmanlike manner. The work consists of furnishing all labor, materials, and equipm ent to install Class II -B buffered bike lanes and appropriate signage, bicycle loop detectors, adjustments to existing video detection systems, striping and slurry sealing along Java Drive between Mathilda Avenue and Crossman Avenue, as called for, and in the manner designated in, and in strict conformity with, the Plans and Specifications prepared by Mark Thomas and adopted by the Owner. These Plans and Specifications are entitled respectively, Java Drive Road Diet and Bike Lanes, Project No. TR-21-03.
It is understood and agreed that the work will be performed and completed as required in the Plans and Specifications under the sole direction and control of the Contractor, and subject to inspection and approval of the Owner, or its representatives. The Owner hereby designates as its representative for the purpose of this contract the Senior Civil Engineer for Construction or an employee of the Owner who will be designated in writing by the Director of Public Works.
3. Contract Price. The Owner agrees to pay, and the Contractor agrees to accept, in full payment for the work above agreed to be done, the sum of Five Hundred Seventy -Four Thousand and No/100 Dollars ($574,000.00) subject to final determination of the work performed and materials furnished at unit prices per “Exhibit A” attached hereto and incorporated by this reference, and subject to additions and deductions in accordance, as provided in the Documents and in accordance with Contract Documents.
4. Permits; Compliance with Law. Contractor shall, at its expense, obtain all necessary permits and licenses, easements, etc., for the construction of the project, give all necessary notices, pay all fees required by law, and comply with all laws, ordinances, rules and regulations relat ing to the work and to the preservation of the public health and safety.
5. Inspection by Owner. Contractor shall at all times maintain proper facilities and provide safe access for inspection by the Owner to all parts of the work, and to the shops wher ein the work is in preparation.
Where the Specifications require work to be specially tested or approved, it shall not be tested or covered up without timely notice to the Owner of its readiness for inspection and without the approval thereof or consent th ereto by the latter. Should any such work be covered up without such notice, approval, or consent, it must, if required by Owner, be uncovered for examination at the Contractor's expense.
Attachment 2
6. Extra or Additional Work and Changes. Should Owner at any time during the progress of the work request any alterations, deviations, additions, or omissions from the Specifications or Plans or other Contract Documents it shall be at liberty to do so, and the same shall in no way affect or make void the contract but will be added to or deducted from the amount of the contract price, as the case may be, by a fair and reasonable valuation, agreed to in writing between the parties hereto. No extra work shall be performed, or change be made, unless in pursuance of a written order from the Director of Public Works or authorized representative, stating that the extra work or change is authorized and no claim for an addition to the contract sum shall be valid unless so ordered.
7. Time for Completion. All work under this con tract shall be completed before the expiration fifty-five (55) working days from the date specified in the Notice to Proceed.
If Contractor shall be delayed in the work by the acts or neglect of Owner, or its employees or those under it by contract or otherwise, or by changes ordered in the work, or by strikes, lockouts by others, fire, unusual delay in transportation, unavoidable casualties or any causes beyond the Contractor's control, or by delay authorized by the Owner, or by any cause which the Owner shall decide to justify the delay, then the time of completion shall be extended for such reasonable time as the Owner may decide.
This provision does not exclude the recovery of damages for delay by either party under other provisions.
8. Inspection and Testing of Materials. Contractor shall notify Owner a sufficient time in advance of the manufacture or production of materials, to be supplied under this contract, in order that the Owner may arrange for mill or factory inspection and testing of same, if Owner requests such notice from Contractor.
9. Termination. If Contractor should file a bankruptcy petition and/or be judged bankrupt, or if Contractor should make a general assignment for the benefit of creditors, or if a receiver should be appointed on account of insolvency, or if Contractor or any subcontractors should violate any of the provisions of the Contract, Owner may serve written notice upon Contractor and its surety of Owner's intention to terminate the Contract. The notice shall contain the reasons for such intention to terminate the Contract, and, unless within ten days after serving such notice, such violation shall cease and satisfactory arrangements for correction thereof be made, upon the expiration of the ten days, the Contract shall cease and terminate. In the event of any such termination, Owner shall immediately serve written notice thereof upon the surety and the Contractor, and the surety shall have the right to take over and perform the Contract; provided, however that, if the surety within fifteen days after the serving upon it of notice of termination does not give Owner written notice of its intention to take over and perform the Contract or does not commence performance thereof within thirty days from the date of the serving of such notice, Owner may take over the work and prosecute the same to completion by contract or by any other method it may deem advisable, for the account and at the expense of Contractor, and Contractor and its surety shall be liable to Owner for any excess cost occasioned Owner thereby, and in such event Owner may without liability for so doing take possession of and utilize in completing the work, such materials, appliances, plant and other property belonging to Contractor as may be on the site of the work and necessary therefor.
10. Owner's Right to Withhold Certain Amounts and Make Application Thereof. In addition to the amount which Owner may retain under Paragraph 21 until the final completion and acceptance of all work covered by the Contract, Owner may withhold from payment to Contractor such amount or amounts as in its judgment may be necessary to pay just claims against Contractor or any subcontractors for labor and services rendered and materials furnished in and about the work. Owner may a pply such withheld amount or amounts to the payment of such claims in its discretion. In so doing Owner shall be deemed the agent of Contractor and any payment so made by Owner shall be considered as a payment made under the Contract by Owner to the Contra ctor and Owner shall not be liable to Contractor for any such payment made in good faith. Such payment may be made without prior judicial determination of the claim or claims.
11. Notice and Service Thereof. All notices required pursuant to this Contract shall be communicated in writing, and shall be delivered in person, by commercial courier or by first class or priority mail delivered by the United States Postal Service. Nothing in this provision shall be construed to prohibit communication by more expedient means, such as by email or fax, to accomplish timely communication. Each party may Attachment 2
change the address by written notice in accordance with this paragraph. Notices delivered personally shall be deemed communicated as of actual receipt; mailed notices shall be deemed communicated as of three business days after mailing. All notices sent pursuant to this Contract shall be addressed as follows:
Owner: City of Sunnyvale
Department of Public Works
Construction Contract Administrator
P. O. Box 3707
Sunnyvale, CA 94088-3707
Contractor: VSS International, Inc.
Attn: Jeffrey Reed
3785 Channel Drive
West Sacramento, CA 95691
12. Assignment of Contract. Neither the Contract, nor any part thereof, nor moneys due or to become due thereunder may be assigned by Contractor without the prior written approval of Owner.
13. Compliance with Specifications of Materials. Whenever in the Specifications, any mate rial or process is indicated or specified by patent or proprietary name, or by name of manufacturer, such Specifications must be met by Contractor, unless Owner agrees in writing to some other material, process or article offered by Contractor which is equal in all respects to the one specified.
14. Contract Security. Contractor shall furnish a surety bond in an amount at least equal to one hundred percent (100%) of the contract price as security for the faithful performance of this Contract. Contractor shall also furnish a separate surety bond in an amount at least equal to one hundred percent (100%) of the contract price as security for the payment of all persons for furnishing materials, provisions, provender, or other supplies, or teams, used in, upon, for or about the performance of the work contracted to be done, or for performing any work or labor thereon of any kind, and for the payment of amounts due under the Unemployment Insurance Code with respect to such work or labor in connection with this Contract, and for the payment of a reasonable attorney's fee to be fixed by the court in case suit is brought upon the bond.
Bonds shall be issued by an admitted surety insurer authorized to operate in the state of California.
15. Insurance. Contractor shall not commence work under this Contract until all insurance required under this paragraph has been obtained and such insurance has been approved by the Owner, nor shall Contractor allow any subcontractor to commence work on a subcontract until all similar insurance required of the subcontractor has been so obtained and approved. Contractor shall furnish the Owner with satisfactory proof of the carriage of insurance required, and there shall be a specific contractual liability endorsement extending the C ontractor's coverage to include the contractual liability assumed by the Contractor pursuant to this Contract and particularly Paragraph 16 hereof. Any policy of insurance required of the Contractor under this Contract shall also contain an endorsement pro viding that thirty (30) days' notice must be given in writing to the Owner of any pending change in the limits of liability or of any cancellation or modification of the policy. Insurance carrier shall be California-admitted:
(a) Compensation Insurance and Employer's Liability Insurance. Contractor shall take out and maintain during the life of this Contract Workers' Compensation Insurance and Employer's Liability Insurance for all of employees employed at the site of the project and, in case any work is sublet, Contractor shall require the subcontractor similarly to provide Workers' Compensation Insurance and Employer's Liability Insurance for all of the latter's employees unless such employees are covered by the protection afforded by Contractor.
In signing this Contract, Contractor makes the following certification, required by Section 1861 of the Labor Code:
"I am aware of the provision of Section 3700 of the Labor Code which requires every employer to be insured against liability for workers' Attachment 2
compensation or to undertake self -insurance in accordance with the provisions of that code, and I will comply with such provisions before commencing the performance of the work of this contract."
(b) General Liability Insurance. Contractor, at its own cost a nd expense, shall maintain personal injury liability and property damage insurance for the period covered by the Contract in the amount of two million dollars exactly ($2,000,000.00) per occurrence and four million dollars exactly ( $4,000,000.00) annual aggregate combined single limit coverage. Such insurance shall be with insurers and under forms of policies satisfactory in all respects to the Owner and shall provide that notice must be given to Owner at least thirty (30) days prior to cancellation or material change. The following endorsements shall be attached to the policy:
Policy shall cover on an "occurrence" basis. Policy must cover personal injuries as well as bodily injuries. Exclusion of contractual liability must be eliminated from personal injury endorsement. Broad form property damage endorsement must be attached. Owner is to be named as an additional insured on any contracts of insurance under this paragraph (b).
Coverage shall not extend to any indemnity coverage for the active n egligence of the additional insured in any case where an agreement to indemnify the additional insured would be invalid under Subdivision (b) of Section 2782 of the Civil Code. The policies of insurance shall be considered primary insurance before any poli cies of insurance maintained by Owner.
(c) Automobile Liability. Contractor, at its own cost and expense, shall maintain automobile insurance for the period covered by the Contract in the amount of one million dollars exactly ($1,000,000.00) combined single limit coverage. Such coverage shall include, but shall not be limited to, protection against claims arising therefrom, and damage to property resulting from activities contemplated under this Contract, use of owned automobiles, products and completed operations.
16. Indemnification and Hold Harmless. Contractor agrees to defend, save, indemnify and hold harmless Owner and all its officers, employees, and agents, against any and all liability, claims, judgments, or demands, including demands arising from injuries or death of persons (Contractor's employees included) and damage to property, arising directly or indirectly out of the obligations herein undertaken or out of the operations conducted by Contractor, save and except claims or litigation arising through the active negligence or willful misconduct of Owner, or of Owner's officials, agents, employees, servants, or independent contractors who are directly responsible to Owner. Contractor shall make good and reimburse Owner for any expenditures, inc luding reasonable attorneys' fees, Owner may make by reason of such claim or litigation, and, if requested by Owner, Contractor shall defend any such suits at the sole cost and expense of Contractor.
17. Hours of Work. Eight hours of labor during any one calendar day and forty hours of labor during any one calendar week shall constitute the maximum hours of service upon all work done hereunder, and it is expressly stipulated that no laborer, worker, or mechanic employed at any time by the Contractor or by any subcontractor or subcontractors under this Contract, upon the work or upon any part of the work contemplated by this Contract, shall be required or permitted to work thereon more than eight hours during any one calendar day and forty hours during any one calendar week, except, as provided by Section 1815 of the Labor Code of the State of California, work performed by employees of contractors in excess of eight hours per day and forty hours during any one week shall be permitted upon public work upon compensation for all hours worked in excess of eight hours per day at not less than one and one-half times the basic rate of pay. It is further expressly stipulated that for each and every violation of Sections 1811 -1815, inclusive, of the Labor Code of the State of California, all the provisions whereof are deemed to be incorporated herein, Contractor shall forfeit, as a penalty to Owner, twenty-five dollars ($25.00) for each laborer, worker, or mechanic employed in the execution of this Contract by Contrac tor, or by any subcontractor under this Contract, for each calendar day during which the laborer, worker, or mechanic is required or permitted to work more than eight hours in any one calendar day and forty hours in any one calendar week in violation of the provisions of the Sections of the Labor Code.
Attachment 2
Contractor, and each subcontractor, shall, in accordance with California Labor Code Section 1776 or as the same may be later amended, keep accurate payroll records showing the name, address, social security number, work classification, straight time and overtime hours worked each day and week, and the actual per diem wages paid to each journeyman, apprentice, worker, or other employee employed by him or her in connection with work under this agreement. Each p ayroll record shall contain or be verified by a written declaration under penalty of perjury, in accordance with Labor Code Section 1776(a). Such payroll records shall be made available at all reasonable times at the Contractor’s principal office to the persons authorized to inspect such records pursuant to Labor Code Section 1776. A certified copy of all payroll records shall be made available for inspection or furnished upon request to a representative of the Division of Labor Standards Enforcement, and the Division of Apprenticeship Standards of the Department of Industrial Relations, as well as to the Owner’s representative. In the event the Contractor or a Subcontractor fails to comply in a timely manner within ten days to a written notice requesting the records, such contractor or subcontractor shall forfeit one hundred dollars ($100.00) for each calendar day, or portion thereof, for each worker, until strict compliance is effectuated, in accordance with Labor Code Section 1776(h).
18. Wage Rates. Pursuant to the Labor Code of the State of California, or any applicable local law, Owner has ascertained the general prevailing rate per diem wages and rates for holidays, and overtime work in the city, for each craft, classification or type of laborer, worker, or mechanic needed to execute this Contract.
Owner has adopted, by reference, the general prevailing rate of wages applicable to the work to be done under the Contract, as adopted and published by the Division of Labor Standards Enforcement and Labor Statistics and Research of the State of California, Department of Industrial Relations, to which reference is hereby made for a full and detailed description. A copy of the prevailing wage rates may be reviewed in the office of the Director of Public Works , City of Sunnyvale, 456 West Olive Avenue, Sunnyvale, California.
Wage rates can also be obtained through the California Department of Industrial Relations website at:
http://www.dir.ca.gov/OPRL/DPreWageDetermination.htm
Neither the notice inviting bids, nor this Contract, shall constitute a representation of fact as to the prevailing wage rates upon which the Contractor or any subcontractor may base any claim against Owner.
It shall be mandatory upon Contractor and upon any subcontractor to pay not less than the specified rates to all laborers, workers, and mechanics employed in the execution of the Contract. It is further expressly stipulated that Contractor shall, as a penalty to Own er, forfeit two hundred dollars exactly ($200.00) for each calendar day, or portion thereof, for each laborer, worker, or mechanic paid less than the stipulated prevailing rates for any work done under this Contract by Contractor or by any subcontractor; a nd Contractor agrees to comply with all provisions of Section 1775 of the Labor Code.
In case it becomes necessary for Contractor or any subcontractor to employ on the project under this Contract any person in a trade or occupation (except executives, sup ervisory, administrative, clerical, or other non-manual workers as such) for which no minimum wage rate is herein specified, Contractor shall immediately notify Owner who will promptly thereafter determine the prevailing rate for such additional trade or occupation and shall furnish Contractor with the minimum rate based thereon. The minimum rate thus furnished shall be applicable as a minimum for such trade or occupation from the time of the initial employment of the person affected and during the continuance of such employment.
19. Accident Prevention. Precaution shall be exercised at all times for the protection of persons (including employees) and property. The safety provisions of applicable laws, building and construction codes shall be observed. Machinery, equipment, and other hazards shall be guarded or eliminated in accordance with the safety provisions of the Construction Safety Orders issued by the Industrial Accident Commission of the State of California.
20. Contractor's Guarantee. Owner sh all not, in any way or manner, be answerable or suffer loss, damage, expense or liability for any loss or damage that may happen to the building, work, or equipment or any part thereof, or in, on, or about the same during its construction and before accept ance. Contractor unqualifiedly guarantees the first -class quality of all workmanship and of all materials, apparatus, and equipment used or installed by Contractor or by any subcontractor or supplier in the project which is the Attachment 2
subject of this Contract, un less a lesser quality is expressly authorized in the Plans and Specifications, in which event Contractor unqualifiedly guarantees such lesser quality; and that the work as performed by Contractor will conform with the Plans and Specifications or any written authorized deviations therefrom. In case of any defect in work, materials, apparatus or equipment, whether latent or patent, revealed to Owner within one year of the date of acceptance of completion of this Contract by Owner, Contractor will forthwith remedy such defect or defects without cost to Owner.
21. Liquidated Damages. Time shall be the essence of this Contract. If Contractor fails to complete, within the time fixed for such completion, the entire work mentioned and described and contracted to be done and performed, Contractor shall become liable to Owner for liquidate d damages in the sum of five hundred dollars exactly ($500.00) for each and every calendar day during which work shall remain uncompleted beyond such time fixed for completion or any lawful extension thereof. The amount specified as liquidated damages is p resumed to be the amount of damage sustained by Owner since it would be impracticable or extremely difficult to fix the actual damage; and the amount of liquidated damages may be deducted by Owner from moneys due Contractor hereunder, or its assigns and su ccessors at the time of completion, and Contractor, or its assigns and successors at the time of completion, and its sureties shall be liable to Owner for any excess.
22. Governing Law, Jurisdiction and Venue. This Agreement shall be governed by and con strued in accordance with the laws of the State of California, without regard to conflict of law or choice of law principles. Proper venue for legal actions will be exclusively vested in a state court in the County of Santa Clara. The parties agree that subject matter and personal jurisdiction are proper in state court in the County of Santa Clara and waive all venue objections.
23. Severability Clause. In case any one or more of the provisions contained herein shall, for any reason, be held invalid, illegal or unenforceable in any respect, it shall not affect the validity of the other provisions which shall remain in full force and effect.
24. Entire Agreement; Amendment. This writing constitutes the entire agreement between the parties relating to th e services to be performed or materials to be furnished hereunder. No modification of this Agreement shall be effective unless and until such modification is evidenced by writing signed by all parties.
25. Execution and Counterparts. This Agreement may be executed in multiple counterparts and/or with the signatures of the Parties set forth on different signature sheets and all such counterparts, when taken together, shall be deemed one original.
Attachment 2
IN WITNESS WHEREOF, two identical counterparts of this contract, each of which shall for all purposed be deemed an original thereof, have been duly executed by the parties.
CITY OF SUNNYVALE VSS INTERNATIONL, INC.
a California chartered municipal corporation Contractor of the State of California, Owner
License No. 293727
By By
City Manager Date
Title Date
Attest:
City Clerk By
Title Date
By
City Clerk Date
(SEAL)
APPROVED AS TO FORM:
City Attorney Date
Attachment 2
EXHIBIT A
BID SCHEDULE
No. Description QTY Unit Unit Cost
1 CONSTRUCTION BEST MANAGEMENT PRACTICES 1 LS $ 5,450.00 2 MOBILIZATION (Recommend Not to Exceed 5% of Total
Base Bid)
1 LS $ 12,589.61
3 REMOVE TRAFFIC STRIPE 13,400 LF $ 0.87
4 REMOVE PAVEMENT MARKERS 461 EA $ 1.09
5 REMOVE PAVEMENT MARKINGS 5,700 SF $ 2.18 6 SLURRY SEAL, TYPE II 296,200 SF $ 0.50
7 ROADSIDE SIGN 32 EA $ 179.85
8 REMOVE ROADSIDE SIGN 30 EA $ 49.05
9 THERMOPLASTIC PAVEMENT MARKING 2,879 SF $ 6.54 10 THERMOPLASTIC TRAFFIC STRIPE, 12” WHITE 2,638 LF $ 5.45 11 THERMOPLASTIC TRAFFIC STRIPE, 6" YELLOW 8,500 LF $ 1.96 12 THERMOPLASTIC TRAFFIC STRIPE, 6" WHITE 13,500 LF $ 1.96 13 THERMOPLASTIC TRAFFIC STRIPE, 8" WHITE 2,200 LF $ 3.27 14 PAVEMENT MARKER TYPE G 99 EA $ 6.54
15 PAVEMENT MARKER TYPE RY 362 EA $ 6.54
16 PAVEMENT MARKER BLUE 30 EA $ 27.25
17 BASE REPAIR AND CRACK SEALING (REVOCABLE
ITEM)
1 LS $ 10,000.00
18 TRAFFIC CONTROL SYSTEM 1 LS $ 67,235.00
19 SIGNAL AND LIGHTING (JAVA DR/MATHILDA AVE) 1 LS $ 27,250.00 20 SIGNAL AND LIGHTING (JAVA DR/BORDEAUX DR) 1 LS $ 32,700.00 21 SIGNAL AND LIGHTING (JAVA DR/BORREGAS AVE) 1 LS $ 32,700.00 22 SIGNAL AND LIGHTING (JAVA DR/GENEVA DR) 1 LS $ 42,510.00 23 SIGNAL AND LIGHTING (JAVA DR/CROSSMAN AVE) 1 LS $ 76,300.00
Attachment 2
EXHIBIT B
Utilization of Local Workforce in Construction Projects – The Sunnyvale City Council has adopted a policy which encourages utilization of local workforces, including State-certified apprentices, as a means of supporting economic opportunities for all members of the community. Local workforce is defined as workers residing in Santa Clara County. The lowest responsive and responsible bidder must provide a projection of locally-hired workers utilized for this contract.
Contractor
Projected Number of Locally Hired Workers_______
Projected Percent of Locally Hired Workers_______%
Subcontractor(s)
Projected Number of Locally Hired Workers_______
Projected Percent of Locally Hired Workers_______%
Attachment 2
GUARANTY
TO THE CITY OF SUNNYVALE, for construction of
Java Drive Road Diet and Bike Lanes, TR-21-03
Federal Aid No. CML-5213 (064)
The undersigned guarantees all construction performed on this project and also guarantees all material and equipment incorporated therein.
Contractor hereby grants to City for a period of one (1) year following the date of Final Acceptance of the Work, or such longer period specified in the Contract Documents, its unconditional war ranty of the quality and adequacy of all of the Work and its compliance with the Contract Documents including, without limitation, all labor, materials and equipment provided by Contractor and its Subcontractors of all tiers in connection with the Work.
Neither final payment nor use or occupancy of the Work performed by the Contractor shall constitute an acceptance of work not done in accordance with this Guaranty or relieve Contractor of liability in respect to any express warranties or responsibilities for faulty materials or workmanship. Contractor shall remedy any defects in the Work and pay for any damage resulting therefrom which shall appear within one (1) year, or longer if specified, from the date of Final Acceptance.
If within one year after the date of Final Acceptance, or such longer period of time as may be prescribed by laws or regulations, or by the terms of Contract Documents, any Work is found to be defective, Contractor shall promptly, without cost to City and in accordance with City’s written instructions, correct such defective Work. Contractor shall remove any defective Work rejected by City and replace it with Work that is not defective, and satisfactorily correct or remove and replace any damage to other Work or the work of others resulting therefrom. If Contractor fails to promptly comply with the terms of such instructions, or in an emergency where delay would cause serious risk of loss or damage, City may have the defective Work corrected or the rejected Work removed and replaced. Contractor shall pay for all claims, costs, losses and damages caused by or resulting from such removal and replacement. Where Contractor fails to correct defective work, or defects are discovered outside the correction period, City shall have all rights and remedies granted by law.
Inspection of the work shall not relieve Contractor of any of its obligations under the Contract Documents.
Even though equipment, materials, or work required to be provided under the Contract Documents have been inspected, accep ted, and estimated for payment, Contractor shall, at its own expense, replace or repair any such equipment, material, or work found to be defective or otherwise not to comply with the requirements of the Contract Documents up to the end of the guaranty period.
All abbreviations and definitions of terms used in this Agreement shall have the meanings set forth in the Contract Documents, including, without means of limitation, Supplemental General Provisions, Definition of Works and Terms.
The foregoing Guar anty is in addition to any other warranties of Contractor contained in the Contract Documents, and not in lieu of, any and all other liability imposed on Contractor under the Contract Documents and at law with respect to Contractor’s duties, obligations, and performance under the Contract Documents. In the event of any conflict or inconsistency between the terms of this Guaranty and any warranty or obligation of the Contractor under the Contract Documents or at law, such inconsistency or conflict shall be resolved in favor of the higher level of obligation of the Contractor.
Attachment 2
(Contractor Name)
(Contractor Address)
_________________________________ ____________________
Contractor Signature Date
Attachment 2
Required Contract Provisions Federal- Aid Construction Contracts I. General
II. Nondiscrimination
III. Nonsegregated Facilities
IV. Davis-Bacon and Related Act Provisions
V. Contract Work Hours and Safety Standards
Act Provisions
VI. Subletting or Assigning the Contract
VII. Safety: Accident Prevention
VIII. False Statements Concerning Highway
Projects
IX. Implementation of Clean Air Act and
Federal Water Pollution Control Act
X. Compliance with Governmentwide
Suspension and Debarment Requirements
XI. Certification Regarding Use of Contract
Funds for Lobbying
ATTACHMENTS
A. Employment and Materials Preference for
Appalachian Development Highway System or
Appalachian Local Access Road Contracts
(included in Appalachian contracts only)
I. GENERAL
1. Form FHWA -1273 must be physically
incorporated in each construction contract
funded under Title 23 (excluding emergency
contracts solely intended for debris removal).
The contractor (or subcontractor) must insert
this form in each subcontract and further require
its inclusion in all lower tier subcontracts
(excluding purchase orders, rental agreements
and other agreements for supplies or services).
The applicable requirements of Form FHWA-
1273 are incorporated by reference for work
done under any purchase order, rental
agreement, or agreement for other services.
The prime contractor shall be responsible for
compliance by any subcontractor, lower-tier
subcontractor, or service provider.
Form FHWA-1273 must be included in all
Federal-aid design-build contracts, in all
subcontracts and in lower tier subcontracts
(excluding subcontracts for design services,
purchase orders, rental agreements and other
agreements for supplies or services). The
design-builder shall be responsible for
compliance by any subcontractor, lower-tier
subcontractor or service provider.
Contracting agencies may reference Form
FHWA-1273 in bid proposal or request for
proposal documents, however, the Form FHWA-
1273 must be physically incorporated (not
referenced) in all contracts, subcontracts, and
lower-tier subcontracts (excluding purchase
orders, rental agreements and other agreements
for supplies or services related to a construction
contract).
2. Subject to the applicability criteria noted in
the following sections, these contract provisions
shall apply to all work performed on the contract
by the contractor's own organization and with
the assistance of workers under the contractor's
immediate superintendence and to all work
performed on the contract by piecework, station
work, or by subcontract.
3. A breach of any of the stipulations contained
in these Required Contract Provisions may be
sufficient grounds for withholding of progress
payments, withholding of final payment,
termination of the contract, suspension /
debarment or any other action determined to be
appropriate by the contracting agency and
FHWA.
4. Selection of Labor: During the performance
of this contract, the contractor shall not use
convict labor for any purpose within the limits of
a construction project on a Federal-aid highway
unless it is labor performed by convicts who are
on parole, supervised release, or probation. The
term Federal-aid highway does not include
roadways functionally classified as local roads or
rural minor collectors.
II. NONDISCRIMINATION
The provisions of this section related to 23 CFR
Part 230 are applicable to all Federal-aid
construction contracts and to all related
construction subcontracts of $10,000 or more.
The provisions of 23 CFR Part 230 are not
applicable to material supply, engineering, or
architectural service contracts. In addition, the
contractor and all subcontractors must comply
with the following policies: Executive Order
11246, 41 CFR 60, 29 CFR 1625-1627, Title 23
USC Section 140, the Rehabilitation Act of 1973,
as amended (29 USC 794), Title VI of the Civil
Rights Act of 1964, as amended, and related
regulations including 49 CFR Parts 21, 26 and
27; and 23 CFR Parts 200, 230, and 633.
The contractor and all subcontractors must
comply with the requirements of the Equal
Opportunity Clause in 41 CFR 60-1.4(b) and, for
all construction contracts exceeding $10,000,
Attachment 2
the Standard Federal Equal Employment
Opportunity Construction Contract Specifications
in 41 CFR 60-4.3.
Note: The U.S. Department of Labor has
exclusive authority to determine compliance with
Executive Order 11246 and the policies of the
Secretary of Labor including 41 CFR 60, and 29
CFR 1625-1627. The contracting agency and
the FHWA have the authority and the
responsibility to ensure compliance with Title 23
USC Section 140, the Rehabilitation Act of 1973,
as amended (29 USC 794), and Title VI of the
Civil Rights Act of 1964, as amended, and
related regulations including 49 CFR Parts 21,
26 and 27; and 23 CFR Parts 200, 230, and
633.
The following provision is adopted from 23 CFR
230, Appendix A, with appropriate revisions to
conform to the U.S. Department of Labor (US
DOL) and FHWA requirements.
1. Equal Employment Opportunity: Equal
employment opportunity (EEO) requirements not
to discriminate and to take affirmative action to
assure equal opportunity as set forth under laws,
executive orders, rules, regulations (28 CFR 35,
29 CFR 1630, 29 CFR 1625-1627, 41 CFR 60
and 49 CFR 27) and orders of the Secretary of
Labor as modified by the provisions prescribed
herein, and imposed pursuant to 23 U.S.C. 140
shall constitute the EEO and specific affirmative
action standards for the contractor's project
activities under this contract. The provisions of
the Americans with Disabilities Act of 1990 (42
U.S.C. 12101 et seq.) set forth under 28 CFR 35
and 29 CFR 1630 are incorporated by reference
in this contract. In the execution of this contract,
the contractor agrees to comply with the
following minimum specific requirement activities
of EEO:
a. The contractor will work with the contracting
agency and the Federal Government to ensure
that it has made every good faith effort to
provide equal opportunity with respect to all of
its terms and conditions of employment and in
their review of activities under the contract.
b. The contractor will accept as its operating
policy the following statement:
"It is the policy of this Company to assure
that applicants are employed, and that
employees are treated during employment,
without regard to their race, religion, sex, color,
national origin, age or disability. Such action
shall include employment, upgrading,
demotion, or transfer; recruitment or
recruitment advertising; layoff or termination;
rates of pay or other forms of compensation;
and selection for training, including
apprenticeship, pre-apprenticeship, and/or on-
the-job training."
2. EEO Officer: The contractor will designate
and make known to the contracting officers an
EEO Officer who will have the responsibility for
and must be capable of effectively administering
and promoting an active EEO program and who
must be assigned adequate authority and
responsibility to do so.
3. Dissemination of Policy: All members of
the contractor's staff who are authorized to hire,
supervise, promote, and discharge employees,
or who recommend such action, or who are
substantially involved in such action, will be
made fully cognizant of, and will implement, the
contractor's EEO policy and contractual
responsibilities to provide EEO in each grade
and classification of employment. To ensure
that the above agreement will be met, the
following actions will be taken as a minimum:
a. Periodic meetings of supervisory and
personnel office employees will be conducted
before the start of work and then not less often
than once every six months, at which time the
contractor's EEO policy and its implementation
will be reviewed and explained. The meetings
will be conducted by the EEO Officer.
b. All new supervisory or personnel office
employees will be given a thorough
indoctrination by the EEO Officer, covering all
major aspects of the contractor's EEO
obligations within thirty days following their
reporting for duty with the contractor.
c. All personnel who are engaged in direct
recruitment for the project will be instructed by
Attachment 2
the EEO Officer in the contractor's procedures
for locating and hiring minorities and women.
d. Notices and posters setting forth the
contractor's EEO policy will be placed in areas
readily accessible to employees, applicants for
employment and potential employees.
e. The contractor's EEO policy and the
procedures to implement such policy will be
brought to the attention of employees by means
of meetings, employee handbooks, or other
appropriate means.
4. Recruitment: When advertising for
employees, the contractor will include in all
advertisements for employees the notation: "An
Equal Opportunity Employer." All such
advertisements will be placed in publications
having a large circulation among minorities and
women in the area from which the project work
force would normally be derived.
a. The contractor will, unless precluded by a
valid bargaining agreement, conduct systematic
and direct recruitment through public and private
employee referral sources likely to yield qualified
minorities and women. To meet this
requirement, the contractor will identify sources
of potential minority group employees and
establish with such identified sources
procedures whereby minority and women
applicants may be referred to the contractor for
employment consideration.
b. In the event the contractor has a valid
bargaining agreement providing for exclusive
hiring hall referrals, the contractor is expected to
observe the provisions of that agreement to the
extent that the system meets the contractor's
compliance with EEO contract provisions.
Where implementation of such an agreement
has the effect of discriminating against minorities
or women, or obligates the contractor to do the
same, such implementation violates Federal
nondiscrimination provisions.
c. The contractor will encourage its present
employees to refer minorities and women as
applicants for employment. Information and
procedures with regard to referring such
applicants will be discussed with employees.
5. Personnel Actions: Wages, working
conditions, and employee benefits shall be
established and administered, and personnel
actions of every type, including hiring,
upgrading, promotion, transfer, demotion, layoff,
and termination, shall be taken without regard to
race, color, religion, sex, national origin, age or
disability. The following procedures shall be
followed:
a. The contractor will conduct periodic
inspections of project sites to insure that working
conditions and employee facilities do not
indicate discriminatory treatment of project site
personnel.
b. The contractor will periodically evaluate the
spread of wages paid within each classification
to determine any evidence of discriminatory
wage practices.
c. The contractor will periodically review
selected personnel actions in depth to determine
whether there is evidence of discrimination.
Where evidence is found, the contractor will
promptly take corrective action. If the review
indicates that the discrimination may extend
beyond the actions reviewed, such corrective
action shall include all affected persons.
d. The contractor will promptly investigate all
complaints of alleged discrimination made to the
contractor in connection with its obligations
under this contract, will attempt to resolve such
complaints, and will take appropriate corrective
action within a reasonable time. If the
investigation indicates that the discrimination
may affect persons other than the complainant,
such corrective action shall include such other
persons. Upon completion of each investigation,
the contractor will inform every complainant of
all of their avenues of appeal.
6. Training and Promotion:
a. The contractor will assist in locating,
qualifying, and increasing the skills of minorities
and women who are applicants for employment
or current employees. Such efforts should be
aimed at developing full journey level status
employees in the type of trade or job
classification involved.
b. Consistent with the contractor's work force
requirements and as permissible under Federal
and State regulations, the contractor shall make
full use of training programs, i.e., apprenticeship,
and on-the-job training programs for the
geographical area of contract performance. In
the event a special provision for training is
provided under this contract, this subparagraph
will be superseded as indicated in the special
provision. The contracting agency may reserve
training positions for persons who receive
welfare assistance in accordance with 23 U.S.C.
140(a).
Attachment 2
c. The contractor will advise employees and
applicants for employment of available training
programs and entrance requirements for each.
d. The contractor will periodically review the
training and promotion potential of employees
who are minorities and women and will
encourage eligible employees to apply for such
training and promotion.
7. Unions: If the contractor relies in whole or in
part upon unions as a source of employees, the
contractor will use good faith efforts to obtain the
cooperation of such unions to increase
opportunities for minorities and women. Actions
by the contractor, either directly or through a
contractor's association acting as agent, will
include the procedures set forth below:
a. The contractor will use good faith efforts to
develop, in cooperation with the unions, joint
training programs aimed toward qualifying more
minorities and women for membership in the
unions and increasing the skills of minorities and
women so that they may qualify for higher
paying employment.
b. The contractor will use good faith efforts to
incorporate an EEO clause into each union
agreement to the end that such union will be
contractually bound to refer applicants without
regard to their race, color, religion, sex, national
origin, age or disability.
c. The contractor is to obtain information as to
the referral practices and policies of the labor
union except that to the extent such information
is within the exclusive possession of the labor
union and such labor union refuses to furnish
such information to the contractor, the contractor
shall so certify to the contracting agency and
shall set forth what efforts have been made to
obtain such information.
d. In the event the union is unable to provide
the contractor with a reasonable flow of referrals
within the time limit set forth in the collective
bargaining agreement, the contractor will,
through independent recruitment efforts, fill the
employment vacancies without regard to race,
color, religion, sex, national origin, age or
disability; making full efforts to obtain qualified
and/or qualifiable minorities and women. The
failure of a union to provide sufficient referrals
(even though it is obligated to provide exclusive
referrals under the terms of a collective
bargaining agreement) does not relieve the
contractor from the requirements of this
paragraph. In the event the union referral
practice prevents the contractor from meeting
the obligations pursuant to Executive Order
11246, as amended, and these special
provisions, such contractor shall immediately
notify the contracting agency.
8. Reasonable Accommodation for
Applicants / Employees with Disabilities:
The contractor must be familiar with the
requirements for and comply with the Americans
with Disabilities Act and all rules and regulations
established there under. Employers must
provide reasonable accommodation in all
employment activities unless to do so would
cause an undue hardship.
9. Selection of Subcontractors, Procurement
of Materials and Leasing of Equipment: The
contractor shall not discriminate on the grounds
of race, color, religion, sex, national origin, age
or disability in the selection and retention of
subcontractors, including procurement of
materials and leases of equipment. The
contractor shall take all necessary and
reasonable steps to ensure nondiscrimination in
the administration of this contract.
a. The contractor shall notify all potential
subcontractors and suppliers and lessors of their
EEO obligations under this contract.
b. The contractor will use good faith efforts to
ensure subcontractor compliance with their EEO
obligations.
10. Assurance Required by 49 CFR
26.13(b):
a. The requirements of 49 CFR Part 26
and the State DOT’s U.S. DOT-approved DBE
program are incorporated by reference.
b. The contractor or subcontractor shall not
discriminate on the basis of race, color, national
origin, or sex in the performance of this contract.
The contractor shall carry out applicable
requirements of 49 CFR Part 26 in the award
and administration of DOT-assisted contracts.
Failure by the contractor to carry out these
requirements is a material breach of this
contract, which may result in the termination of
this contract or such other remedy as the
contracting agency deems appropriate.
11. Records and Reports: The contractor shall
keep such records as necessary to document
compliance with the EEO requirements. Such
records shall be retained for a period of three
years following the date of the final payment to
the contractor for all contract work and shall be
available at reasonable times and places for
inspection by authorized representatives of the
contracting agency and the FHWA.
Attachment 2
a. The records kept by the contractor shall
document the following:
(1) The number and work hours of minority
and non-minority group members and
women employed in each work classification
on the project;
(2) The progress and efforts being made in
cooperation with unions, when applicable, to
increase employment opportunities for
minorities and women; and
(3) The progress and efforts being made in
locating, hiring, training, qualifying, and
upgrading minorities and women;
b. The contractors and subcontractors will
submit an annual report to the contracting
agency each July for the duration of the project,
indicating the number of minorities, women, and
non-minority group employees currently
engaged in each work classification required by
the contract work. This information is to be
reported on Form FHWA-1391. The staffing
data should represent the project work force on
board in all or any part of the last payroll period
preceding the end of July. If on-the-job training
is being required by special provision, the
contractor will be required to collect and report
training data. The employment data should
reflect the work force on board during all or any
part of the last payroll period preceding the end
of July.
III. NONSEGREGATED FACILITIES
This provision is applicable to all Federal-aid
construction contracts and to all related
construction subcontracts of $10,000 or more.
The contractor must ensure that facilities
provided for employees are provided in such a
manner that segregation on the basis of race,
color, religion, sex, or national origin cannot
result. The contractor may neither require such
segregated use by written or oral policies nor
tolerate such use by employee custom. The
contractor's obligation extends further to ensure
that its employees are not assigned to perform
their services at any location, under the
contractor's control, where the facilities are
segregated. The term "facilities" includes
waiting rooms, work areas, restaurants and
other eating areas, time clocks, restrooms,
washrooms, locker rooms, and other storage or
dressing areas, parking lots, drinking fountains,
recreation or entertainment areas,
transportation, and housing provided for
employees. The contractor shall provide
separate or single-user restrooms and
necessary dressing or sleeping areas to assure
privacy between sexes.
IV. DAVIS-BACON AND RELATED ACT
PROVISIONS
This section is applicable to all Federal-aid
construction projects exceeding $2,000 and to
all related subcontracts and lower-tier
subcontracts (regardless of subcontract size).
The requirements apply to all projects located
within the right-of-way of a roadway that is
functionally classified as Federal-aid highway.
This excludes roadways functionally classified
as local roads or rural minor collectors, which
are exempt. Contracting agencies may elect to
apply these requirements to other projects.
The following provisions are from the U.S.
Department of Labor regulations in 29 CFR 5.5
“Contract provisions and related matters” with
minor revisions to conform to the FHWA-1273
format and FHWA program requirements.
1. Minimum wages
a. All laborers and mechanics employed or
working upon the site of the work, will be paid
unconditionally and not less often than once a
week, and without subsequent deduction or
rebate on any account (except such payroll
deductions as are permitted by regulations
issued by the Secretary of Labor under the
Copeland Act (29 CFR part 3)), the full amount
of wages and bona fide fringe benefits (or cash
equivalents thereof) due at time of payment
computed at rates not less than those contained
in the wage determination of the Secretary of
Labor which is attached hereto and made a part
hereof, regardless of any contractual
relationship which may be alleged to exist
between the contractor and such laborers and
mechanics.
Contributions made or costs reasonably
anticipated for bona fide fringe benefits under
section 1(b)(2) of the Davis-Bacon Act on behalf
of laborers or mechanics are considered wages
paid to such laborers or mechanics, subject to
the provisions of paragraph 1.d. of this section;
also, regular contributions made or costs
incurred for more than a weekly period (but not
less often than quarterly) under plans, funds, or
programs which cover the particular weekly
period, are deemed to be constructively made or
incurred during such weekly period. Such
laborers and mechanics shall be paid the
Attachment 2
appropriate wage rate and fringe benefits on the
wage determination for the classification of work
actually performed, without regard to skill,
except as provided in 29 CFR 5.5(a)(4).
Laborers or mechanics performing work in more
than one classification may be compensated at
the rate specified for each classification for the
time actually worked therein: Provided, That the
employer's payroll records accurately set forth
the time spent in each classification in which
work is performed. The wage determination
(including any additional classification and wage
rates conformed under paragraph 1.b. of this
section) and the Davis-Bacon poster (WH–1321)
shall be posted at all times by the contractor and
its subcontractors at the site of the work in a
prominent and accessible place where it can be
easily seen by the workers.
b. (1) The contracting officer shall require
that any class of laborers or mechanics,
including helpers, which is not listed in the wage
determination, and which is to be employed
under the contract shall be classified in
conformance with the wage determination. The
contracting officer shall approve an additional
classification and wage rate and fringe benefits
therefore only when the following criteria have
been met:
(i) The work to be performed by the
classification requested is not performed by a
classification in the wage determination; and
(ii) The classification is utilized in the area
by the construction industry; and
(iii) The proposed wage rate, including any
bona fide fringe benefits, bears a reasonable
relationship to the wage rates contained in
the wage determination.
(2) If the contractor and the laborers and
mechanics to be employed in the classification
(if known), or their representatives, and the
contracting officer agree on the classification
and wage rate (including the amount
designated for fringe benefits where
appropriate), a report of the action taken shall
be sent by the contracting officer to the
Administrator of the Wage and Hour Division,
Employment Standards Administration, U.S.
Department of Labor, Washington, DC 20210.
The Administrator, or an authorized
representative, will approve, modify, or
disapprove every additional classification
action within 30 days of receipt and so advise
the contracting officer or will notify the
contracting officer within the 30-day period that
additional time is necessary.
(3) In the event the contractor, the laborers or
mechanics to be employed in the classification
or their representatives, and the contracting
officer do not agree on the proposed
classification and wage rate (including the
amount designated for fringe benefits, where
appropriate), the contracting officer shall refer
the questions, including the views of all
interested parties and the recommendation of
the contracting officer, to the Wage and Hour
Administrator for determination. The Wage and
Hour Administrator, or an authorized
representative, will issue a determination
within 30 days of receipt and so advise the
contracting officer or will notify the contracting
officer within the 30-day period that additional
time is necessary.
(4) The wage rate (including fringe benefits
where appropriate) determined pursuant to
paragraphs 1.b.(2) or 1.b.(3) of this section,
shall be paid to all workers performing work in
the classification under this contract from the
first day on which work is performed in the
classification.
c. Whenever the minimum wage rate
prescribed in the contract for a class of laborers
or mechanics includes a fringe benefit which is
not expressed as an hourly rate, the contractor
shall either pay the benefit as stated in the wage
determination or shall pay another bona fide
fringe benefit or an hourly cash equivalent
thereof.
d. If the contractor does not make payments to
a trustee or other third person, the contractor
may consider as part of the wages of any
laborer or mechanic the amount of any costs
reasonably anticipated in providing bona fide
fringe benefits under a plan or program,
Provided, That the Secretary of Labor has
found, upon the written request of the contractor,
that the applicable standards of the Davis-Bacon
Act have been met. The Secretary of Labor may
require the contractor to set aside in a separate
account, assets for the meeting of obligations
under the plan or program.
2. Withholding
The contracting agency shall upon its own action
or upon written request of an authorized
representative of the Department of Labor,
withhold or cause to be withheld from the
contractor under this contract, or any other
Federal contract with the same prime contractor,
or any other federally-assisted contract subject
to Davis-Bacon prevailing wage requirements,
which is held by the same prime contractor, so
Attachment 2
much of the accrued payments or advances as
may be considered necessary to pay laborers
and mechanics, including apprentices, trainees,
and helpers, employed by the contractor or any
subcontractor the full amount of wages required
by the contract. In the event of failure to pay
any laborer or mechanic, including any
apprentice, trainee, or helper, employed or
working on the site of the work, all or part of the
wages required by the contract, the contracting
agency may, after written notice to the
contractor, take such action as may be
necessary to cause the suspension of any
further payment, advance, or guarantee of funds
until such violations have ceased.
3. Payrolls and basic records
a. Payrolls and basic records relating thereto
shall be maintained by the contractor during the
course of the work and preserved for a period of
three years thereafter for all laborers and
mechanics working at the site of the work. Such
records shall contain the name, address, and
social security number of each such worker, his
or her correct classification, hourly rates of
wages paid (including rates of contributions or
costs anticipated for bona fide fringe benefits or
cash equivalents thereof of the types described
in section 1(b)(2)(B) of the Davis-Bacon Act),
daily and weekly number of hours worked,
deductions made, and actual wages paid.
Whenever the Secretary of Labor has found
under 29 CFR 5.5(a)(1)(iv) that the wages of any
laborer or mechanic include the amount of any
costs reasonably anticipated in providing
benefits under a plan or program described in
section 1(b)(2)(B) of the Davis-Bacon Act, the
contractor shall maintain records which show
that the commitment to provide such benefits is
enforceable, that the plan or program is
financially responsible, and that the plan or
program has been communicated in writing to
the laborers or mechanics affected, and records
which show the costs anticipated or the actual
cost incurred in providing such benefits.
Contractors employing apprentices or trainees
under approved programs shall maintain written
evidence of the registration of apprenticeship
programs and certification of trainee programs,
the registration of the apprentices and trainees,
and the ratios and wage rates prescribed in the
applicable programs.
b. (1) The contractor shall submit weekly
for each week in which any contract work is
performed a copy of all payrolls to the
contracting agency. The payrolls submitted
shall set out accurately and completely all of the
information required to be maintained under 29
CFR 5.5(a)(3)(i), except that full social security
numbers and home addresses shall not be
included on weekly transmittals. Instead, the
payrolls shall only need to include an individually
identifying number for each employee (e.g., the
last four digits of the employee's social security
number). The required weekly payroll
information may be submitted in any form
desired. Optional Form WH–347 is available for
this purpose from the Wage and Hour Division
Web site at
http://www.dol.gov/esa/whd/forms/wh347instr.ht
m or its successor site. The prime contractor is
responsible for the submission of copies of
payrolls by all subcontractors. Contractors and
subcontractors shall maintain the full social
security number and current address of each
covered worker and shall provide them upon
request to the contracting agency for
transmission to the State DOT, the FHWA or the
Wage and Hour Division of the Department of
Labor for purposes of an investigation or audit of
compliance with prevailing wage requirements. It
is not a violation of this section for a prime
contractor to require a subcontractor to provide
addresses and social security numbers to the
prime contractor for its own records, without
weekly submission to the contracting agency.
(2) Each payroll submitted shall be accompanied
by a “Statement of Compliance,” signed by the
contractor or subcontractor or his or her agent
who pays or supervises the payment of the
persons employed under the contract and shall
certify the following:
(i) That the payroll for the payroll period
contains the information required to be
provided under §5.5 (a)(3)(ii) of Regulations,
29 CFR part 5, the appropriate information is
being maintained under §5.5 (a)(3)(i) of
Regulations, 29 CFR part 5, and that such
information is correct and complete;
(ii) That each laborer or mechanic
(including each helper, apprentice, and
trainee) employed on the contract during the
payroll period has been paid the full weekly
wages earned, without rebate, either directly
or indirectly, and that no deductions have
been made either directly or indirectly from
the full wages earned, other than permissible
deductions as set forth in Regulations, 29
CFR part 3;
(iii) That each laborer or mechanic has
been paid not less than the applicable wage
rates and fringe benefits or cash equivalents
for the classification of work performed, as
Attachment 2
specified in the applicable wage
determination incorporated into the contract.
(3) The weekly submission of a properly
executed certification set forth on the reverse
side of Optional Form WH–347 shall satisfy the
requirement for submission of the “Statement
of Compliance” required by paragraph 3.b.(2)
of this section.
(4) The falsification of any of the above
certifications may subject the contractor or
subcontractor to civil or criminal prosecution
under section 1001 of title 18 and section 231
of title 31 of the United States Code.
c. The contractor or subcontractor shall make
the records required under paragraph 3.a. of this
section available for inspection, copying, or
transcription by authorized representatives of
the contracting agency, the State DOT, the
FHWA, or the Department of Labor, and shall
permit such representatives to interview
employees during working hours on the job. If
the contractor or subcontractor fails to submit
the required records or to make them available,
the FHWA may, after written notice to the
contractor, the contracting agency, or the State
DOT, take such action as may be necessary to
cause the suspension of any further payment,
advance, or guarantee of funds. Furthermore,
failure to submit the required records upon
request or to make such records available may
be grounds for debarment action pursuant to 29
CFR 5.12.
4. Apprentices and trainees
a. Apprentices (programs of the USDOL).
Apprentices will be permitted to work at less
than the predetermined rate for the work they
performed when they are employed pursuant to
and individually registered in a bona fide
apprenticeship program registered with the U.S.
Department of Labor, Employment and Training
Administration, Office of Apprenticeship
Training, Employer and Labor Services, or with
a State Apprenticeship Agency recognized by
the Office, or if a person is employed in his or
her first 90 days of probationary employment as
an apprentice in such an apprenticeship
program, who is not individually registered in the
program, but who has been certified by the
Office of Apprenticeship Training, Employer and
Labor Services or a State Apprenticeship
Agency (where appropriate) to be eligible for
probationary employment as an apprentice.
The allowable ratio of apprentices to
journeymen on the job site in any craft
classification shall not be greater than the ratio
permitted to the contractor as to the entire work
force under the registered program. Any worker
listed on a payroll at an apprentice wage rate,
who is not registered or otherwise employed as
stated above, shall be paid not less than the
applicable wage rate on the wage determination
for the classification of work actually performed.
In addition, any apprentice performing work on
the job site in excess of the ratio permitted under
the registered program shall be paid not less
than the applicable wage rate on the wage
determination for the work actually performed.
Where a contractor is performing construction
on a project in a locality other than that in which
its program is registered, the ratios and wage
rates (expressed in percentages of the
journeyman's hourly rate) specified in the
contractor's or subcontractor's registered
program shall be observed.
Every apprentice must be paid at not less than
the rate specified in the registered program for
the apprentice's level of progress, expressed as
a percentage of the journeymen hourly rate
specified in the applicable wage determination.
Apprentices shall be paid fringe benefits in
accordance with the provisions of the
apprenticeship program. If the apprenticeship
program does not specify fringe benefits,
apprentices must be paid the full amount of
fringe benefits listed on the wage determination
for the applicable classification. If the
Administrator determines that a different practice
prevails for the applicable apprentice
classification, fringes shall be paid in
accordance with that determination.
In the event the Office of Apprenticeship
Training, Employer and Labor Services, or a
State Apprenticeship Agency recognized by the
Office, withdraws approval of an apprenticeship
program, the contractor will no longer be
permitted to utilize apprentices at less than the
applicable predetermined rate for the work
performed until an acceptable program is
approved.
b. Trainees (programs of the USDOL).
Except as provided in 29 CFR 5.16, trainees will
not be permitted to work at less than the
predetermined rate for the work performed
unless they are employed pursuant to and
individually registered in a program which has
received prior approval, evidenced by formal
certification by the U.S. Department of Labor,
Employment and Training Administration.
Attachment 2
The ratio of trainees to journeymen on the job
site shall not be greater than permitted under the
plan approved by the Employment and Training
Administration.
Every trainee must be paid at not less than the
rate specified in the approved program for the
trainee's level of progress, expressed as a
percentage of the journeyman hourly rate
specified in the applicable wage determination.
Trainees shall be paid fringe benefits in
accordance with the provisions of the trainee
program. If the trainee program does not
mention fringe benefits, trainees shall be paid
the full amount of fringe benefits listed on the
wage determination unless the Administrator of
the Wage and Hour Division determines that
there is an apprenticeship program associated
with the corresponding journeyman wage rate
on the wage determination which provides for
less than full fringe benefits for apprentices. Any
employee listed on the payroll at a trainee rate
who is not registered and participating in a
training plan approved by the Employment and
Training Administration shall be paid not less
than the applicable wage rate on the wage
determination for the classification of work
actually performed. In addition, any trainee
performing work on the job site in excess of the
ratio permitted under the registered program
shall be paid not less than the applicable wage
rate on the wage determination for the work
actually performed.
In the event the Employment and Training
Administration withdraws approval of a training
program, the contractor will no longer be
permitted to utilize trainees at less than the
applicable predetermined rate for the work
performed until an acceptable program is
approved.
c. Equal employment opportunity. The
utilization of apprentices, trainees and
journeymen under this part shall be in conformity
with the equal employment opportunity
requirements of Executive Order 11246, as
amended, and 29 CFR part 30.
d. Apprentices and Trainees (programs of the
U.S. DOT).
Apprentices and trainees working under
apprenticeship and skill training programs which
have been certified by the Secretary of
Transportation as promoting EEO in connection
with Federal-aid highway construction programs
are not subject to the requirements of paragraph
4 of this Section IV. The straight time hourly
wage rates for apprentices and trainees under
such programs will be established by the
particular programs. The ratio of apprentices
and trainees to journeymen shall not be greater
than permitted by the terms of the particular
program.
5. Compliance with Copeland Act
requirements. The contractor shall comply
with the requirements of 29 CFR part 3, which
are incorporated by reference in this contract.
6. Subcontracts. The contractor or
subcontractor shall insert Form FHWA-1273 in
any subcontracts and also require the
subcontractors to include Form FHWA-1273 in
any lower tier subcontracts. The prime
contractor shall be responsible for the
compliance by any subcontractor or lower tier
subcontractor with all the contract clauses in 29
CFR 5.5.
7. Contract termination: debarment. A
breach of the contract clauses in 29 CFR 5.5
may be grounds for termination of the contract,
and for debarment as a contractor and a
subcontractor as provided in 29 CFR 5.12.
8. Compliance with Davis-Bacon and Related
Act requirements. All rulings and
interpretations of the Davis-Bacon and Related
Acts contained in 29 CFR parts 1, 3, and 5 are
herein incorporated by reference in this contract.
9. Disputes concerning labor standards.
Disputes arising out of the labor standards
provisions of this contract shall not be subject to
the general disputes clause of this contract.
Such disputes shall be resolved in accordance
with the procedures of the Department of Labor
set forth in 29 CFR parts 5, 6, and 7. Disputes
within the meaning of this clause include
disputes between the contractor (or any of its
subcontractors) and the contracting agency, the
U.S. Department of Labor, or the employees or
their representatives.
10. Certification of eligibility.
a. By entering into this contract, the contractor
certifies that neither it (nor he or she) nor any
person or firm who has an interest in the
contractor's firm is a person or firm ineligible to
be awarded Government contracts by virtue of
section 3(a) of the Davis-Bacon Act or 29 CFR
5.12(a)(1).
b. No part of this contract shall be subcontracted
to any person or firm ineligible for award of a
Attachment 2
Government contract by virtue of section 3(a) of
the Davis-Bacon Act or 29 CFR 5.12(a)(1).
c. The penalty for making false statements is
prescribed in the U.S. Criminal Code, 18 U.S.C.
1001.
V. CONTRACT WORK HOURS AND SAFETY
STANDARDS ACT
The following clauses apply to any Federal-aid
construction contract in an amount in excess of
$100,000 and subject to the overtime provisions
of the Contract Work Hours and Safety
Standards Act. These clauses shall be inserted
in addition to the clauses required by 29 CFR
5.5(a) or 29 CFR 4.6. As used in this
paragraph, the terms laborers and mechanics
include watchmen and guards.
1. Overtime requirements. No contractor or
subcontractor contracting for any part of the
contract work which may require or involve the
employment of laborers or mechanics shall
require or permit any such laborer or mechanic
in any workweek in which he or she is employed
on such work to work in excess of forty hours in
such workweek unless such laborer or mechanic
receives compensation at a rate not less than
one and one-half times the basic rate of pay for
all hours worked in excess of forty hours in such
workweek.
2. Violation; liability for unpaid wages;
liquidated damages. In the event of any
violation of the clause set forth in paragraph (1.)
of this section, the contractor and any
subcontractor responsible therefor shall be liable
for the unpaid wages. In addition, such
contractor and subcontractor shall be liable to
the United States (in the case of work done
under contract for the District of Columbia or a
territory, to such District or to such territory), for
liquidated damages. Such liquidated damages
shall be computed with respect to each
individual laborer or mechanic, including
watchmen and guards, employed in violation of
the clause set forth in paragraph (1.) of this
section, in the sum of $10 for each calendar day
on which such individual was required or
permitted to work in excess of the standard
workweek of forty hours without payment of the
overtime wages required by the clause set forth
in paragraph (1.) of this section.
3. Withholding for unpaid wages and
liquidated damages. The FHWA or the
contacting agency shall upon its own action or
upon written request of an authorized
representative of the Department of Labor
withhold or cause to be withheld, from any
moneys payable on account of work performed
by the contractor or subcontractor under any
such contract or any other Federal contract with
the same prime contractor, or any other
federally-assisted contract subject to the
Contract Work Hours and Safety Standards Act,
which is held by the same prime contractor,
such sums as may be determined to be
necessary to satisfy any liabilities of such
contractor or subcontractor for unpaid wages
and liquidated damages as provided in the
clause set forth in paragraph (2.) of this section.
4. Subcontracts. The contractor or
subcontractor shall insert in any subcontracts
the clauses set forth in paragraph (1.) through
(4.) of this section and also a clause requiring
the subcontractors to include these clauses in
any lower tier subcontracts. The prime
contractor shall be responsible for compliance
by any subcontractor or lower tier subcontractor
with the clauses set forth in paragraphs (1.)
through (4.) of this section.
VI. SUBLETTING OR ASSIGNING THE
CONTRACT
This provision is applicable to all Federal-aid
construction contracts on the National Highway
System.
1. The contractor shall perform with its own
organization contract work amounting to not less
than 30 percent (or a greater percentage if
specified elsewhere in the contract) of the total
original contract price, excluding any specialty
items designated by the contracting agency.
Specialty items may be performed by
subcontract and the amount of any such
specialty items performed may be deducted
from the total original contract price before
computing the amount of work required to be
performed by the contractor's own organization
(23 CFR 635.116).
a. The term “perform work with its own
organization” refers to workers employed or
leased by the prime contractor, and equipment
owned or rented by the prime contractor, with or
without operators. Such term does not include
employees or equipment of a subcontractor or
lower tier subcontractor, agents of the prime
contractor, or any other assignees. The term
may include payments for the costs of hiring
leased employees from an employee leasing
firm meeting all relevant Federal and State
regulatory requirements. Leased employees
Attachment 2
may only be included in this term if the prime
contractor meets all of the following conditions:
(1) the prime contractor maintains control over
the supervision of the day-to-day activities of
the leased employees;
(2) the prime contractor remains responsible
for the quality of the work of the leased
employees;
(3) the prime contractor retains all power to
accept or exclude individual employees from
work on the project; and
(4) the prime contractor remains ultimately
responsible for the payment of predetermined
minimum wages, the submission of payrolls,
statements of compliance and all other Federal
regulatory requirements.
b. "Specialty Items" shall be construed to be
limited to work that requires highly specialized
knowledge, abilities, or equipment not ordinarily
available in the type of contracting organizations
qualified and expected to bid or propose on the
contract as a whole and in general are to be
limited to minor components of the overall
contract.
2. The contract amount upon which the
requirements set forth in paragraph (1) of
Section VI is computed includes the cost of
material and manufactured products which are
to be purchased or produced by the contractor
under the contract provisions.
3. The contractor shall furnish (a) a competent
superintendent or supervisor who is employed
by the firm, has full authority to direct
performance of the work in accordance with the
contract requirements, and is in charge of all
construction operations (regardless of who
performs the work) and (b) such other of its own
organizational resources (supervision,
management, and engineering services) as the
contracting officer determines is necessary to
assure the performance of the contract.
4. No portion of the contract shall be sublet,
assigned, or otherwise disposed of except with
the written consent of the contracting officer, or
authorized representative, and such consent
when given shall not be construed to relieve the
contractor of any responsibility for the fulfillment
of the contract. Written consent will be given
only after the contracting agency has assured
that each subcontract is evidenced in writing and
that it contains all pertinent provisions and
requirements of the prime contract.
5. The 30% self-performance requirement of
paragraph (1) is not applicable to design-build
contracts; however, contracting agencies may
establish their own self-performance
requirements.
VII. SAFETY: ACCIDENT PREVENTION
This provision is applicable to all Federal-aid
construction contracts and to all related
subcontracts.
1. In the performance of this contract the
contractor shall comply with all applicable
Federal, State, and local laws governing safety,
health, and sanitation (23 CFR 635). The
contractor shall provide all safeguards, safety
devices and protective equipment and take any
other needed actions as it determines, or as the
contracting officer may determine, to be
reasonably necessary to protect the life and
health of employees on the job and the safety of
the public and to protect property in connection
with the performance of the work covered by the
contract.
2. It is a condition of this contract, and shall be
made a condition of each subcontract, which the
contractor enters into pursuant to this contract,
that the contractor and any subcontractor shall
not permit any employee, in performance of the
contract, to work in surroundings or under
conditions which are unsanitary, hazardous or
dangerous to his/her health or safety, as
determined under construction safety and health
standards (29 CFR 1926) promulgated by the
Secretary of Labor, in accordance with Section
107 of the Contract Work Hours and Safety
Standards Act (40 U.S.C. 3704).
3. Pursuant to 29 CFR 1926.3, it is a condition of
this contract that the Secretary of Labor or
authorized representative thereof, shall have
right of entry to any site of contract performance
to inspect or investigate the matter of
compliance with the construction safety and
health standards and to carry out the duties of
the Secretary under Section 107 of the Contract
Work Hours and Safety Standards Act (40
U.S.C.3704).
VIII. FALSE STATEMENTS CONCERNING
HIGHWAY PROJECTS
This provision is applicable to all Federal-aid
construction contracts and to all related
subcontracts.
Attachment 2
In order to assure high quality and durable
construction in conformity with approved plans
and specifications and a high degree of reliability
on statements and representations made by
engineers, contractors, suppliers, and workers
on Federal-aid highway projects, it is essential
that all persons concerned with the project
perform their functions as carefully, thoroughly,
and honestly as possible. Willful falsification,
distortion, or misrepresentation with respect to
any facts related to the project is a violation of
Federal law. To prevent any misunderstanding
regarding the seriousness of these and similar
acts, Form FHWA-1022 shall be posted on each
Federal-aid highway project (23 CFR 635) in
one or more places where it is readily available
to all persons concerned with the project:
18 U.S.C. 1020 reads as follows:
"Whoever, being an officer, agent, or employee
of the United States, or of any State or Territory,
or whoever, whether a person, association, firm,
or corporation, knowingly makes any false
statement, false representation, or false report
as to the character, quality, quantity, or cost of
the material used or to be used, or the quantity
or quality of the work performed or to be
performed, or the cost thereof in connection with
the submission of plans, maps, specifications,
contracts, or costs of construction on any
highway or related project submitted for
approval to the Secretary of Transportation; or
Whoever knowingly makes any false
statement, false representation, false report, or
false claim with respect to the character, quality,
quantity, or cost of any work performed or to be
performed, or materials furnished or to be
furnished, in connection with the construction of
any highway or related project approved by the
Secretary of Transportation; or
Whoever knowingly makes any false statement
or false representation as to material fact in any
statement, certificate, or report submitted
pursuant to provisions of the Federal-aid Roads
Act approved July 1, 1916, (39 Stat. 355), as
amended and supplemented;
Shall be fined under this title or imprisoned not
more than 5 years or both."
IX. IMPLEMENTATION OF CLEAN AIR ACT
AND FEDERAL WATER POLLUTION
CONTROL ACT
This provision is applicable to all Federal-aid
construction contracts and to all related
subcontracts.
By submission of this bid/proposal or the
execution of this contract, or subcontract, as
appropriate, the bidder, proposer, Federal-aid
construction contractor, or subcontractor, as
appropriate, will be deemed to have stipulated
as follows:
1. That any person who is or will be utilized in
the performance of this contract is not prohibited
from receiving an award due to a violation of
Section 508 of the Clean Water Act or Section
306 of the Clean Air Act.
2. That the contractor agrees to include or
cause to be included the requirements of
paragraph (1) of this Section X in every
subcontract, and further agrees to take such
action as the contracting agency may direct as a
means of enforcing such requirements.
X. CERTIFICATION REGARDING
DEBARMENT, SUSPENSION, INELIGIBILITY
AND VOLUNTARY EXCLUSION
This provision is applicable to all Federal-aid
construction contracts, design-build contracts,
subcontracts, lower-tier subcontracts, purchase
orders, lease agreements, consultant contracts
or any other covered transaction requiring
FHWA approval or that is estimated to cost
$25,000 or more – as defined in 2 CFR Parts
180 and 1200.
1. Instructions for Certification – First Tier
Participants:
a. By signing and submitting this proposal, the
prospective first tier participant is providing the
certification set out below.
b. The inability of a person to provide the
certification set out below will not necessarily
result in denial of participation in this covered
transaction. The prospective first tier participant
shall submit an explanation of why it cannot
provide the certification set out below. The
certification or explanation will be considered in
connection with the department or agency's
determination whether to enter into this
transaction. However, failure of the prospective
first tier participant to furnish a certification or an explanation shall disqualify such a person from
participation in this transaction.
c. The certification in this clause is a material
representation of fact upon which reliance was
placed when the contracting agency determined
Attachment 2
to enter into this transaction. If it is later
determined that the prospective participant
knowingly rendered an erroneous certification, in
addition to other remedies available to the
Federal Government, the contracting agency
may terminate this transaction for cause of
default.
d. The prospective first tier participant shall
provide immediate written notice to the
contracting agency to whom this proposal is
submitted if any time the prospective first tier
participant learns that its certification was
erroneous when submitted or has become
erroneous by reason of changed circumstances.
e. The terms "covered transaction,"
"debarred," "suspended," "ineligible,"
"participant," "person," "principal," and
"voluntarily excluded," as used in this clause,
are defined in 2 CFR Parts 180 and 1200. “First
Tier Covered Transactions” refers to any
covered transaction between a grantee or
subgrantee of Federal funds and a participant
(such as the prime or general contract). “Lower
Tier Covered Transactions” refers to any
covered transaction under a First Tier Covered
Transaction (such as subcontracts). “First Tier
Participant” refers to the participant who has
entered into a covered transaction with a
grantee or subgrantee of Federal funds (such as
the prime or general contractor). “Lower Tier
Participant” refers any participant who has
entered into a covered transaction with a First
Tier Participant or other Lower Tier Participants
(such as subcontractors and suppliers).
f. The prospective first tier participant agrees
by submitting this proposal that, should the
proposed covered transaction be entered into, it
shall not knowingly enter into any lower tier
covered transaction with a person who is
debarred, suspended, declared ineligible, or
voluntarily excluded from participation in this
covered transaction, unless authorized by the
department or agency entering into this
transaction.
g. The prospective first tier participant further
agrees by submitting this proposal that it will
include the clause titled "Certification Regarding
Debarment, Suspension, Ineligibility and
Voluntary Exclusion-Lower Tier Covered
Transactions," provided by the department or
contracting agency, entering into this covered
transaction, without modification, in all lower tier
covered transactions and in all solicitations for
lower tier covered transactions exceeding the
$25,000 threshold.
h. A participant in a covered transaction may
rely upon a certification of a prospective
participant in a lower tier covered transaction
that is not debarred, suspended, ineligible, or
voluntarily excluded from the covered
transaction, unless it knows that the certification
is erroneous. A participant is responsible for
ensuring that its principals are not suspended,
debarred, or otherwise ineligible to participate in
covered transactions. To verify the eligibility of
its principals, as well as the eligibility of any
lower tier prospective participants, each
participant may, but is not required to, check the
Excluded Parties List System website
(https://www.epls.gov/), which is compiled by the
General Services Administration.
i. Nothing contained in the foregoing shall be
construed to require the establishment of a
system of records in order to render in good faith
the certification required by this clause. The
knowledge and information of the prospective
participant is not required to exceed that which
is normally possessed by a prudent person in
the ordinary course of business dealings.
j. Except for transactions authorized under
paragraph (f) of these instructions, if a
participant in a covered transaction knowingly
enters into a lower tier covered transaction with
a person who is suspended, debarred, ineligible,
or voluntarily excluded from participation in this
transaction, in addition to other remedies
available to the Federal Government, the
department or agency may terminate this
transaction for cause or default.
2. Certification Regarding Debarment,
Suspension, Ineligibility and Voluntary
Exclusion – First Tier Participants:
a. The prospective first tier participant certifies
to the best of its knowledge and belief, that it
and its principals:
(1) Are not presently debarred, suspended,
proposed for debarment, declared ineligible, or
voluntarily excluded from participating in
covered transactions by any Federal department
or agency;
(2) Have not within a three-year period
preceding this proposal been convicted of or had
a civil judgment rendered against them for
commission of fraud or a criminal offense in
connection with obtaining, attempting to obtain,
or performing a public (Federal, State or local)
transaction or contract under a public
transaction; violation of Federal or State antitrust
statutes or commission of embezzlement, theft,
forgery, bribery, falsification or destruction of
Attachment 2
records, making false statements, or receiving
stolen property;
(3) Are not presently indicted for or
otherwise criminally or civilly charged by a
governmental entity (Federal, State or local) with
commission of any of the offenses enumerated
in paragraph (a)(2) of this certification; and
(4) Have not within a three-year period
preceding this application/proposal had one or
more public transactions (Federal, State or local)
terminated for cause or default.
b. Where the prospective participant is unable
to certify to any of the statements in this
certification, such prospective participant shall
attach an explanation to this proposal.
2. Instructions for Certification - Lower Tier
Participants:
(Applicable to all subcontracts, purchase orders
and other lower tier transactions requiring prior
FHWA approval or estimated to cost $25,000 or
more - 2 CFR Parts 180 and 1200)
a. By signing and submitting this proposal, the
prospective lower tier is providing the
certification set out below.
b. The certification in this clause is a material
representation of fact upon which reliance was
placed when this transaction was entered into. If
it is later determined that the prospective lower
tier participant knowingly rendered an erroneous
certification, in addition to other remedies
available to the Federal Government, the
department, or agency with which this
transaction originated may pursue available
remedies, including suspension and/or
debarment.
c. The prospective lower tier participant shall
provide immediate written notice to the person to
which this proposal is submitted if at any time
the prospective lower tier participant learns that
its certification was erroneous by reason of
changed circumstances.
d. The terms "covered transaction,"
"debarred," "suspended," "ineligible,"
"participant," "person," "principal," and
"voluntarily excluded," as used in this clause,
are defined in 2 CFR Parts 180 and 1200. You
may contact the person to which this proposal is
submitted for assistance in obtaining a copy of
those regulations. “First Tier Covered
Transactions” refers to any covered transaction
between a grantee or subgrantee of Federal
funds and a participant (such as the prime or
general contract). “Lower Tier Covered
Transactions” refers to any covered transaction
under a First Tier Covered Transaction (such as
subcontracts). “First Tier Participant” refers to
the participant who has entered into a covered
transaction with a grantee or subgrantee of
Federal funds (such as the prime or general
contractor). “Lower Tier Participant” refers any
participant who has entered into a covered
transaction with a First Tier Participant or other
Lower Tier Participants (such as subcontractors
and suppliers).
e. The prospective lower tier participant
agrees by submitting this proposal that, should
the proposed covered transaction be entered
into, it shall not knowingly enter into any lower
tier covered transaction with a person who is
debarred, suspended, declared ineligible, or
voluntarily excluded from participation in this
covered transaction, unless authorized by the
department or agency with which this
transaction originated.
f. The prospective lower tier participant further
agrees by submitting this proposal that it will
include this clause titled "Certification Regarding
Debarment, Suspension, Ineligibility and
Voluntary Exclusion-Lower Tier Covered
Transaction," without modification, in all lower
tier covered transactions and in all solicitations
for lower tier covered transactions exceeding the
$25,000 threshold.
g. A participant in a covered transaction may
rely upon a certification of a prospective
participant in a lower tier covered transaction
that is not debarred, suspended, ineligible, or
voluntarily excluded from the covered
transaction, unless it knows that the certification
is erroneous. A participant is responsible for
ensuring that its principals are not suspended,
debarred, or otherwise ineligible to participate in
covered transactions. To verify the eligibility of
its principals, as well as the eligibility of any
lower tier prospective participants, each
participant may, but is not required to, check the
Excluded Parties List System website
(https://www.epls.gov/), which is compiled by the
General Services Administration.
h. Nothing contained in the foregoing shall be
construed to require establishment of a system
of records in order to render in good faith the
certification required by this clause. The
knowledge and information of participant is not
required to exceed that which is normally
possessed by a prudent person in the ordinary
course of business dealings.
Attachment 2
i. Except for transactions authorized under
paragraph e of these instructions, if a participant
in a covered transaction knowingly enters into a
lower tier covered transaction with a person who
is suspended, debarred, ineligible, or voluntarily
excluded from participation in this transaction, in
addition to other remedies available to the
Federal Government, the department or agency
with which this transaction originated may
pursue available remedies, including suspension
and/or debarment.
Certification Regarding Debarment,
Suspension, Ineligibility and Voluntary
Exclusion--Lower Tier Participants:
1. The prospective lower tier participant
certifies, by submission of this proposal, that
neither it nor its principals is presently debarred,
suspended, proposed for debarment, declared
ineligible, or voluntarily excluded from
participating in covered transactions by any
Federal department or agency.
2. Where the prospective lower tier participant
is unable to certify to any of the statements in
this certification, such prospective participant
shall attach an explanation to this proposal.
XI. CERTIFICATION REGARDING USE OF
CONTRACT FUNDS FOR LOBBYING
This provision is applicable to all Federal-aid
construction contracts and to all related
subcontracts which exceed $100,000 (49 CFR
20).
1. The prospective participant certifies, by
signing and submitting this bid or proposal, to
the best of his or her knowledge and belief, that:
a. No Federal appropriated funds have been
paid or will be paid, by or on behalf of the
undersigned, to any person for influencing or
attempting to influence an officer or employee of
any Federal agency, a Member of Congress, an
officer or employee of Congress, or an
employee of a Member of Congress in
connection with the awarding of any Federal
contract, the making of any Federal grant, the
making of any Federal loan, the entering into of
any cooperative agreement, and the extension,
continuation, renewal, amendment, or
modification of any Federal contract, grant, loan,
or cooperative agreement.
b. If any funds other than Federal appropriated
funds have been paid or will be aid to any
person for influencing or attempting to influence
an officer or employee of any Federal agency, a
Member of Congress, an officer or employee of
Congress, or an employee of a Member of
Congress in connection with this Federal
contract, grant, loan, or cooperative agreement,
the undersigned shall complete and submit
Standard Form-LLL, "Disclosure Form to Report
Lobbying," in accordance with its instructions.
2. This certification is a material representation
of fact upon which reliance was placed when
this transaction was made or entered into.
Submission of this certification is a prerequisite
for making or entering into this transaction
imposed by 31 U.S.C. 1352. Any person who
fails to file the required certification shall be
subject to a civil penalty of not less than $10,000
and not more than $100,000 for each such
failure.
3. The prospective participant also agrees by
submitting its bid or proposal that the participant
shall require that the language of this
certification be included in all lower tier
subcontracts, which exceed $100,000 and that
all such recipients shall certify and disclose
accordingly.
Attachment 2
FEDERAL
MINIMUM WAGE RATES
See the Federal Department of Labor web site at
https://sam.gov
for current Federal Minimum Wage Rates.
The Wage Decision used by the City of Sunnyvale is:
CA20220018
https://sam.gov/wage-determination/CA20220018/6
Refer to Wage Rates with “Last Revised Date” of: 04/01/2022 Attachment 2
"General Decision Number: CA20220018 04/01/2022
Superseded General Decision Number: CA20210018
State: California
Construction Types: Building, Heavy (Heavy and Dredging) and
Highway
Counties: Alameda, Calaveras, Contra Costa, Fresno, Kings, Madera, Mariposa, Merced, Monterey, San Benito, San
Francisco,
San Joaquin, San Mateo, Santa Clara, Santa Cruz, Stanislaus and
Tuolumne Counties in California.
BUILDING CONSTRUCTION PROJECTS; DREDGING PROJECTS (does not include hopper dredge work); HEAVY CONSTRUCTION PROJECTS (does
not include water well drilling); HIGHWAY CONSTRUCTION
PROJECTS
Note: Contracts subject to the Davis-Bacon Act are
generally
required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.
Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).
___________________________________________________________ ___
|If the contract is entered |. Executive Order 14026 |
|into on or after January 30, | generally applies to the |
|2022, or the contract is | contract.
|
Attachment 2
|renewed or extended (e.g., an |. The contractor must pay |
|option is exercised) on or | all covered workers at |
|after January 30, 2022: | least $15.00 per hour (or |
| | the applicable wage rate |
| | listed on this wage
|
| | determination, if it is |
| | higher) for all hours |
| | spent performing on the |
| | contract in 2022.
|
|______________________________|___________________________ __|
|If the contract was awarded on|. Executive Order 13658 |
|or between January 1, 2015 and| generally applies to the |
|January 29, 2022, and the | contract.
|
|contract is not renewed or |. The contractor must pay all|
|extended on or after January | covered workers at least |
|30, 2022: | $11.25 per hour (or the |
| | applicable wage rate
listed|
| | on this wage
determination,|
| | if it is higher) for all |
| | hours spent performing on |
| | that contract in 2022. |
|______________________________|___________________________ __|
Attachment 2
The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the
Executive Orders and a classification considered necessary for
performance of work on the contract does not appear on this wage determination, the contractor must still submit a
conformance request.
Additional information on contractor requirements and
worker
protections under the Executive Orders is available at
https://www.dol.gov/agencies/whd/government-contracts.
Modification Number Publication Date
0 01/07/2022
1 01/14/2022
2 01/21/2022
3 02/18/2022
4 02/25/2022
5 03/25/2022
6 04/01/2022
ASBE0016-004 01/01/2021
AREA 1: CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA, MERCED,
MONTEREY, SAN BENITO, SAN JOAQUIN, SANTA CRUZ, STANISLAUS &
TOULMNE COUNTIES
AREA 2: ALAMEDA, CONTRA COSTA, SAN FRANSICO, SAN MATEO & SANTA
CLARA COUNTIES
Rates Fringes
Asbestos Removal
worker/hazardous material
handler (Includes
preparation, wetting,
stripping, removal,
scrapping, vacuuming, bagging
Attachment 2
and disposing of all
insulation materials from
mechanical systems, whether
they contain asbestos or not)
Area 1......................$ 30.45 10.60
Area 2......................$ 36.53 9.27
----------------------------------------------------------- -----
ASBE0016-008 01/01/2021
AREA 1: ALAMEDA, CONTRA COSTA, MONTEREY, SAN BENITO, SAN
FRANSICO, SAN MATEO, SANTA CLARA, & SANTA CRUZ
AREA 2: CALAVERAS, COLUSA, FRESNO, KINGS, MADERA, MARIPOSA,
MERCED, SAN JOAQUIN, STANISLAU, & TUOLUMNE
Rates Fringes
Asbestos Workers/Insulator
(Includes the application of
all insulating materials,
Protective Coverings,
Coatings, and Finishes to all
types of mechanical systems)
Area 1......................$ 74.16 23.58
Area 2......................$ 46.81 33.50
----------------------------------------------------------- -----
BOIL0549-001 01/01/2021
AREA 1: ALAMEDA, CONTRA COSTA, SAN FRANCISCO, SAN MATEO & SANTA
CLARA COUNTIES
AREA 2: REMAINING COUNTIES
Rates Fringes
BOILERMAKER
Area 1......................$ 49.62 41.27
Area 2......................$ 45.60 38.99
Attachment 2
----------------------------------------------------------- -----
BRCA0003-001 08/01/2021
Rates Fringes
MARBLE FINISHER..................$ 37.72 17.64 ----------------------------------------------------------- -----
BRCA0003-003 08/01/2021
Rates Fringes
MARBLE MASON.....................$ 53.17 29.10 ----------------------------------------------------------- -----
BRCA0003-005 05/01/2020
Rates Fringes
BRICKLAYER
( 1) Fresno, Kings,
Madera, Mariposa, Merced....$ 43.68 22.19
( 7) San Francisco, San
Mateo.......................$ 47.65 26.77
( 8) Alameda, Contra
Costa, San Benito, Santa
Clara.......................$ 49.42 22.70
( 9) Calaveras, San
Joaquin, Stanislaus,
Toulumne....................$ 45.12 21.55
(16) Monterey, Santa Cruz...$ 45.88 25.02
----------------------------------------------------------- -----
BRCA0003-008 07/01/2021
Rates Fringes
TERRAZZO FINISHER................$ 39.95 18.46 TERRAZZO WORKER/SETTER...........$ 53.03 28.34 ----------------------------------------------------------- -----
BRCA0003-011 04/01/2019
Attachment 2
AREA 1: Alameda, Contra Costa, Monterey, San Benito, San Francisco, San Mateo, Santa Clara, Santa Cruz
AREA 2: Calaveras, San Joaquin, Stanislaus, Tuolumne
AREA 3: Fresno, Kings, Madera, Mariposa, Merced
Rates Fringes
TILE FINISHER
Area 1......................$ 29.94 16.38
Area 2......................$ 25.60 14.30
Area 3......................$ 26.58 15.65
Tile Layer
Area 1......................$ 49.90 19.16
Area 2......................$ 42.67 16.81
Area 3......................$ 40.27 18.58
----------------------------------------------------------- -----
CARP0022-001 07/01/2021
San Francisco County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 55.00 31.49
Journeyman Carpenter........$ 54.85 31.49
Millwright..................$ 54.95 33.08
----------------------------------------------------------- -----
CARP0034-001 07/01/2021
Rates Fringes
Diver
Assistant Tender, ROV
Attachment 2
Tender/Technician...........$ 54.10 34.69
Diver standby...............$ 60.51 34.69
Diver Tender................$ 59.51 34.69
Diver wet...................$ 103.62 34.69
Manifold Operator (mixed
gas)........................$ 64.51 34.69
Manifold Operator (Standby).$ 59.51 34.69
DEPTH PAY (Surface Diving):
050 to 100 ft $2.00 per foot
101 to 150 ft $3.00 per foot
151 to 220 ft $4.00 per foot
221 ft.-deeper $5.00 per foot
SATURATION DIVING:
The standby rate shall apply until saturation starts.
The
saturation diving rate applies when divers are under
pressure continuously until work task and decompression are
complete. The diver rate shall be paid for all saturation hours.
DIVING IN ENCLOSURES:
Where it is necessary for Divers to enter pipes or
tunnels,
or other enclosures where there is no vertical ascent,
the
following premium shall be paid: Distance traveled from entrance 26 feet to 300 feet: $1.00 per foot. When it is
necessary for a diver to enter any pipe, tunnel or other enclosure less than 48"" in height, the premium will be $1.00 per foot.
WORK IN COMBINATION OF CLASSIFICATIONS:
Employees working in any combination of classifications within the diving crew (except dive supervisor) in a
shift
are paid in the classification with the highest rate for that shift.
----------------------------------------------------------- -----
Attachment 2
CARP0034-003 07/01/2021
Rates Fringes
Piledriver.......................$ 54.10 34.69 ----------------------------------------------------------- -----
CARP0035-007 07/01/2020
AREA 1: Alameda, Contra Costa, San Francisco, San Mateo, Santa
Clara counties
AREA 2: Monterey, San Benito, Santa Cruz Counties
AREA 3: Calaveras, Fresno, Kings, Madera, Mariposa, Merced, San
Joaquin, Stanislaus, Tuolumne Counties
Rates Fringes
Modular Furniture Installer
Area 1
Installer..................$ 28.76 22.53
Lead Installer.............$ 32.21 23.03
Master Installer...........$ 36.43 23.03
Area 2
Installer..................$ 26.11 22.53
Lead Installer.............$ 29.08 23.03
Master Installer...........$ 32.71 23.03
Area 3
Installer..................$ 25.16 22.53
Lead Installer.............$ 27.96 23.03
Master Installer...........$ 31.38 23.03
----------------------------------------------------------- -----
CARP0035-008 08/01/2020
AREA 1: Alameda, Contra Costa, San Francisco, San Mateo, Santa
Clara counties
AREA 2: Monterey, San Benito, Santa Cruz Counties
Attachment 2
AREA 3: San Joaquin
AREA 4: Calaveras, Fresno, Kings, Madera, Mariposa, Merced, Stanislaus, Tuolumne Counties
Rates Fringes
Drywall Installers/Lathers:
Area 1......................$ 52.65 31.26
Area 2......................$ 46.77 31.26
Area 3......................$ 47.27 31.26
Area 4......................$ 45.92 31.26
Drywall Stocker/Scrapper
Area 1......................$ 26.33 18.22
Area 2......................$ 23.39 18.22
Area 3......................$ 23.64 18.22
Area 4......................$ 22.97 18.22
----------------------------------------------------------- -----
CARP0152-001 07/01/2020
Contra Costa County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 52.65 30.82
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 52.80 30.82
Journeyman Carpenter........$ 52.65 30.82
Millwright..................$ 52.75 32.41
----------------------------------------------------------- -----
CARP0152-002 07/01/2020
San Joaquin County
Rates Fringes
Attachment 2
Carpenters
Bridge Builder/Highway
Carpenter...................$ 52.65 30.82
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 46.92 30.82
Journeyman Carpenter........$ 46.77 30.82
Millwright..................$ 49.27 32.41
----------------------------------------------------------- -----
CARP0152-004 07/01/2020
Calaveras, Mariposa, Merced, Stanislaus and Tuolumne
Counties
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 52.65 30.82
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 45.57 30.82
Journeyman Carpenter........$ 45.42 30.82
Millwright..................$ 47.92 32.41
----------------------------------------------------------- -----
CARP0217-001 07/01/2021
San Mateo County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Attachment 2
Steel Shoring Erector, Saw
Filer.......................$ 55.00 31.49
Journeyman Carpenter........$ 54.85 31.49
Millwright..................$ 54.95 33.08
----------------------------------------------------------- -----
CARP0405-001 07/01/2021
Santa Clara County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 55.00 31.49
Journeyman Carpenter........$ 54.85 31.49
Millwright..................$ 54.95 33.08
----------------------------------------------------------- -----
CARP0405-002 07/01/2021
San Benito County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 49.12 31.49
Journeyman Carpenter........$ 48.97 31.49
Millwright..................$ 51.47 33.08
----------------------------------------------------------- -----
CARP0505-001 07/01/2021
Attachment 2
Santa Cruz County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 49.12 31.49
Journeyman Carpenter........$ 48.97 31.49
Millwright..................$ 51.47 33.08
----------------------------------------------------------- -----
CARP0605-001 07/01/2021
Monterey County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 49.12 31.49
Journeyman Carpenter........$ 48.97 31.49
Millwright..................$ 51.47 33.08
----------------------------------------------------------- -----
CARP0701-001 07/01/2021
Fresno and Madera Counties
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Attachment 2
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 47.77 31.49
Journeyman Carpenter........$ 47.62 31.49
Millwright..................$ 50.12 33.08
----------------------------------------------------------- -----
CARP0713-001 07/01/2021
Alameda County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 55.00 31.49
Journeyman Carpenter........$ 54.85 31.49
Millwright..................$ 54.95 33.08
----------------------------------------------------------- -----
CARP1109-001 07/01/2021
Kings County
Rates Fringes
Carpenters
Bridge Builder/Highway
Carpenter...................$ 54.85 31.49
Hardwood Floorlayer,
Shingler, Power Saw
Operator, Steel Scaffold &
Steel Shoring Erector, Saw
Filer.......................$ 47.77 31.49
Journeyman Carpenter........$ 47.62 31.49
Millwright..................$ 50.12 33.08
----------------------------------------------------------- -----
Attachment 2
ELEC0006-004 12/01/2021
SAN FRANCISCO COUNTY
Rates Fringes
Sound & Communications
Installer...................$ 48.43 3%+23.15
Technician..................$ 55.69 3%+23.15
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC0006-007 06/01/2021
SAN FRANCISCO COUNTY
Rates Fringes
Attachment 2
ELECTRICIAN......................$ 80.00 3%+39.215 ----------------------------------------------------------- -----
ELEC0100-002 09/01/2021
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
ELECTRICIAN......................$ 41.00 26.18 ----------------------------------------------------------- -----
ELEC0100-005 12/01/2019
FRESNO, KINGS, MADERA
Rates Fringes
Communications System
Installer...................$ 35.25 20.86
Technician..................$ 40.54 21.02
SCOPE OF WORK
Includes the installation testing, service and
maintenance,
of the following systems which utilize the transmission and/or transference of voice, sound, vision and digital for
commercial, education, security and entertainment
purposes
for the following: TV monitoring and surveillance,
background-foreground music, intercom and telephone
interconnect, inventory control systems, microwave
transmission, multi-media, multiplex, nurse call system, radio page, school intercom and sound, burglar alarms,
and
low voltage master clock systems.
A. SOUND AND VOICE TRANSMISSION/TRANSFERENCE SYSTEMS
Background foreground music, Intercom and telephone
interconnect systems, Telephone systems Nurse call
systems,
Radio page systems, School intercom and sound systems,
Attachment 2
Burglar alarm systems, Low voltage, master clock systems, Multi-media/multiplex systems, Sound and musical
entertainment systems, RF systems, Antennas and Wave
Guide,
B. FIRE ALARM SYSTEMS Installation, wire pulling and
testing
C. TELEVISION AND VIDEO SYSTEMS Television monitoring and
surveillance systems Video security systems, Video
entertainment systems, Video educational systems,
Microwave
transmission systems, CATV and CCTV
D. SECURITY SYSTEMS Perimeter security systems Vibration sensor systems Card access systems Access control
systems,
Sonar/infrared monitoring equipment
E. COMMUNICATIONS SYSTEMS THAT TRANSMIT OR RECEIVE
INFORMATION AND/OR CONTROL SYSTEMS THAT ARE INTRINSIC TO THE ABOVE LISTED SYSTEMS SCADA (Supervisory Control and Data Acquisition) PCM (Pulse Code Modulation) Inventory Control Systems, Digital Data Systems Broadband and
Baseband and Carriers Point of Sale Systems, VSAT Data
Systems Data Communication Systems RF and Remote
Control
Systems, Fiber Optic Data Systems
WORK EXCLUDED Raceway systems are not covered (excluding Ladder-Rack for the purpose of the above listed systems).
Chases and/or nipples (not to exceed 10 feet) may be
installed on open wiring systems. Energy management
systems. SCADA (Supervisory Control and Data
Acquisition)
when not intrinsic to the above listed systems (in the
scope). Fire alarm systems when installed in raceways
(including wire and cable pulling) shall be performed at the electrician wage rate, when either of the following two
(2) conditions apply:
1. The project involves new or major remodel building
trades
Attachment 2
construction.
2. The conductors for the fire alarm system are
installed in
conduit.
----------------------------------------------------------- -----
ELEC0234-001 12/28/2020
MONTEREY, SAN BENITO AND SANTA CRUZ COUNTIES
Rates Fringes
ELECTRICIAN
Zone A......................$ 53.41 27.95
Zone B......................$ 58.75 28.11
Zone A: All of Santa Cruz, Monterey, and San Benito
Counties
within 25 air miles of Highway 1 and Dolan Road in Moss Landing, and an area extending 5 miles east and west of Highway 101 South to the San Luis Obispo County Line
Zone B: Any area outside of Zone A
----------------------------------------------------------- -----
ELEC0234-003 12/01/2020
MONTEREY, SAN BENITO, AND SANTA CRUZ COUNTIES
Rates Fringes
Sound & Communications
Installer...................$ 45.50 22.52
Technician..................$ 52.33 22.72
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
Attachment 2
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC0302-001 03/01/2021
CONTRA COSTA COUNTY
Rates Fringes
CABLE SPLICER....................$ 63.86 29.17 ELECTRICIAN......................$ 56.76 28.95 ----------------------------------------------------------- -----
ELEC0302-003 12/01/2020
CONTRA COSTA COUNTY
Rates Fringes
Sound & Communications
Installer...................$ 42.11 22.52
Technician..................$ 44.83 22.72
SCOPE OF WORK: Including any data system whose only
function
Attachment 2
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC0332-001 06/01/2021
SANTA CLARA COUNTY
Rates Fringes
CABLE SPLICER....................$ 86.45 42.14 ELECTRICIAN......................$ 75.17 41.81
FOOTNOTES: Work under compressed air or where gas masks are
required, orwork on ladders, scaffolds, stacks, ""Bosun's chairs,"" or other structures and where the workers are not
protected by permanent guard rails at a distance of 40 to 60 ft. from the ground or supporting structures: to be
paid
Attachment 2
one and one-half times the straight-time rate of pay.
Work on structures of 60 ft. or over (as described
above):
to be paid twice the straight-time rate of pay.
----------------------------------------------------------- -----
ELEC0332-003 12/01/2021
SANTA CLARA COUNTY
Rates Fringes
Sound & Communications
Installer...................$ 47.93 24.088
Technician..................$ 55.12 24.304
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
Attachment 2
----------------------------------------------------------- -----
ELEC0595-001 06/01/2021
ALAMEDA COUNTY
Rates Fringes
CABLE SPLICER....................$ 72.80 3%+39.94 ELECTRICIAN......................$ 63.30 3%+39.94 ----------------------------------------------------------- -----
ELEC0595-002 06/01/2021
CALAVERAS AND SAN JOAQUIN COUNTIES
Rates Fringes
CABLE SPLICER....................$ 50.70 7.75%+25.58
ELECTRICIAN
(1) Tunnel work.............$ 44.25 7.75%+25.58
(2) All other work.........$ 42.25 7.75%+25.58
----------------------------------------------------------- -----
ELEC0595-006 12/01/2021
ALAMEDA COUNTY
Rates Fringes
Sound & Communications
Installer...................$ 47.93 3%+22.65
Technician..................$ 55.12 3%+22.65
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or Attachment 2
jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC0595-008 12/01/2021
CALAVERAS AND SAN JOAQUIN COUNTIES
Rates Fringes
Communications System
Installer...................$ 38.24 3%+22.65
Technician..................$ 43.98 3%+22.65
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety Attachment 2
systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC0617-001 06/01/2021
SAN MATEO COUNTY
Rates Fringes
ELECTRICIAN......................$ 70.00 41.74 ----------------------------------------------------------- -----
ELEC0617-003 12/01/2021
SAN MATEO COUNTY
Rates Fringes
Sound & Communications
Installer...................$ 47.93 24.09
Technician..................$ 55.12 24.30
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or Attachment 2
jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
* ELEC0684-001 12/01/2021
MARIPOSA, MERCED, STANISLAUS AND TUOLUMNE COUNTIES
Rates Fringes
ELECTRICIAN......................$ 42.50 3%+25.88
CABLE SPLICER = 110% of Journeyman Electrician
----------------------------------------------------------- -----
ELEC0684-004 12/01/2021
MARIPOSA, MERCED, STANISLAUS AND TUOLUMNE COUNTIES
Rates Fringes
Communications System
Installer...................$ 38.24 23.80
Technician..................$ 43.98 23.97
SCOPE OF WORK: Including any data system whose only
function
is to transmit or receive information; excluding all
other
Attachment 2
data systems or multiple systems which include control function or power supply; inclusion or exclusion of
terminations and testings of conductors determined by
their function; excluding fire alarm work when installed in raceways (including wire and cable pulling) and when performed on new or major remodel building projects or jobs for which the conductors for the fire alarm system are
installed in conduit; excluding installation of raceway systems, line voltage work, industrial work, life-safety systems (all buildings having floors located more than
75'
above the lowest floor level having building access);
excluding energy management systems.
FOOTNOTE: Fire alarm work when installed in raceways
(including wire and cable pulling), on projects which
involve new or major remodel building construction, for which the conductors for the fire alarm system are
installed in the conduit, shall be performed by the
inside
electrician.
----------------------------------------------------------- -----
ELEC1245-001 01/01/2022
Rates Fringes
LINE CONSTRUCTION
(1) Lineman; Cable splicer..$ 60.19 22.07
(2) Equipment specialist
(operates crawler
tractors, commercial motor
vehicles, backhoes,
trenchers, cranes (50 tons
and below), overhead &
underground distribution
line equipment).............$ 48.08 20.86
(3) Groundman...............$ 36.76 20.46
(4) Powderman...............$ 51.87 18.79
HOLIDAYS: New Year's Day, M.L. King Day, Memorial Day,
Attachment 2
Independence Day, Labor Day, Veterans Day, Thanksgiving Day
and day after Thanksgiving, Christmas Day
----------------------------------------------------------- -----
ELEV0008-001 01/01/2022
Rates Fringes
ELEVATOR MECHANIC................$ 74.54 36.885+a+b
FOOTNOTE:
a. PAID VACATION: Employer contributes 8% of regular
hourly
rate as vacation pay credit for employees with more than 5 years of service, and 6% for 6 months to 5 years of
service.
b. PAID HOLIDAYS: New Year's Day, Memorial Day,
Independence
Day, Labor Day, Veterans' Day, Thanksgiving Day, Friday after Thanksgiving, and Christmas Day.
----------------------------------------------------------- -----
ENGI0003-001 06/28/2021
""AREA 1"" WAGE RATES ARE LISTED BELOW
""AREA 2"" RECEIVES AN ADDITIONAL $2.00 PER HOUR ABOVE AREA 1 RATES.
SEE AREA DEFINITIONS BELOW
Rates Fringes
OPERATOR: Power Equipment
(AREA 1:)
GROUP 1.....................$ 53.92 31.54
GROUP 2.....................$ 52.39 31.54
GROUP 3.....................$ 50.91 31.54
Attachment 2
GROUP 4.....................$ 49.53 31.54
GROUP 5.....................$ 48.26 31.54
GROUP 6.....................$ 46.94 31.54
GROUP 7.....................$ 45.80 31.54
GROUP 8.....................$ 44.66 31.54
GROUP 8-A...................$ 42.45 31.54
OPERATOR: Power Equipment
(Cranes and Attachments -
AREA 1:)
GROUP 1
Cranes.....................$ 52.30 31.15
Oiler......................$ 43.79 31.15
Truck crane oiler..........$ 46.08 31.15
GROUP 2
Cranes.....................$ 50.54 31.15
Oiler......................$ 42.83 31.15
Truck crane oiler..........$ 45.07 31.15
GROUP 3
Cranes.....................$ 48.80 31.15
Hydraulic..................$ 44.44 31.15
Oiler......................$ 42.55 31.15
Truck crane oiler..........$ 44.83 31.15
GROUP 4
Cranes.....................$ 45.76 31.15
OPERATOR: Power Equipment
(Piledriving - AREA 1:)
GROUP 1
Lifting devices............$ 52.64 31.15
Oiler......................$ 43.38 31.15
Truck Crane Oiler..........$ 45.66 31.15
GROUP 2
Lifting devices............$ 50.82 31.15
Oiler......................$ 43.11 31.15
Truck Crane Oiler..........$ 45.41 31.15
GROUP 3
Lifting devices............$ 49.14 31.15
Oiler......................$ 42.89 31.15
Truck Crane Oiler..........$ 45.12 31.15
GROUP 4
Lifting devices............$ 47.37 31.15
GROUP 5
Lifting devices............$ 44.73 31.15
GROUP 6
Lifting devices............$ 42.50 31.15
Attachment 2
OPERATOR: Power Equipment
(Steel Erection - AREA 1:)
GROUP 1
Cranes.....................$ 53.27 31.15
Oiler......................$ 43.72 31.15
Truck Crane Oiler..........$ 45.95 31.15
GROUP 2
Cranes.....................$ 51.50 31.15
Oiler......................$ 43.45 31.15
Truck Crane Oiler..........$ 45.73 31.15
GROUP 3
Cranes.....................$ 50.02 31.15
Hydraulic..................$ 45.07 31.15
Oiler......................$ 43.23 31.15
Truck Crane Oiler..........$ 45.46 31.15
GROUP 4
Cranes.....................$ 48.00 31.15
GROUP 5
Cranes.....................$ 46.70 31.15
OPERATOR: Power Equipment
(Tunnel and Underground Work
- AREA 1:)
SHAFTS, STOPES, RAISES:
GROUP 1....................$ 47.52 31.15
GROUP 1-A..................$ 49.99 31.15
GROUP 2....................$ 46.26 31.15
GROUP 3....................$ 44.93 31.15
GROUP 4....................$ 43.79 31.15
GROUP 5....................$ 42.65 31.15
UNDERGROUND:
GROUP 1....................$ 47.42 31.15
GROUP 1-A..................$ 49.89 31.15
GROUP 2....................$ 46.16 31.15
GROUP 3....................$ 44.83 31.15
GROUP 4....................$ 43.69 31.15
GROUP 5....................$ 42.55 31.15
FOOTNOTE: Work suspended by ropes or cables, or work on a Yo-Yo Cat: $.60 per hour additional.
POWER EQUIPMENT OPERATOR CLASSIFICATIONS
Attachment 2
GROUP 1: Operator of helicopter (when used in erection
work);
Hydraulic excavator, 7 cu. yds. and over; Power shovels, over 7 cu. yds.
GROUP 2: Highline cableway; Hydraulic excavator, 3-1/2
cu.
yds. up to 7 cu. yds.; Licensed construction work boat
operator, on site; Power blade operator (finish); Power shovels, over 1 cu. yd. up to and including 7 cu. yds.
m.r.c.
GROUP 3: Asphalt milling machine; Cable backhoe;
Combination
backhoe and loader over 3/4 cu. yds.; Continuous flight tie
back machine assistant to engineer or mechanic; Crane
mounted continuous flight tie back machine, tonnage to
apply; Crane mounted drill attachment, tonnage to apply; Dozer, slope brd; Gradall; Hydraulic excavator, up to 3 1/2
cu. yds.; Loader 4 cu. yds. and over; Long reach
excavator;
Multiple engine scraper (when used as push pull); Power shovels, up to and including 1 cu. yd.; Pre-stress wire wrapping machine; Side boom cat, 572 or larger; Track
loader 4 cu. yds. and over; Wheel excavator (up to and
including 750 cu. yds. per hour)
GROUP 4: Asphalt plant engineer/box person; Chicago boom; Combination backhoe and loader up to and including 3/4
cu.
yd.; Concrete batch plant (wet or dry); Dozer and/or push cat; Pull- type elevating loader; Gradesetter, grade
checker (GPS, mechanical or otherwise); Grooving and
grinding machine; Heading shield operator; Heavy-duty
drilling equipment, Hughes, LDH, Watson 3000 or similar; Heavy-duty repairperson and/or welder; Lime spreader;
Loader under 4 cu. yds.; Lubrication and service engineer (mobile and grease rack); Mechanical finishers or
spreader
machine (asphalt, Barber-Greene and similar); Miller
Formless M-9000 slope paver or similar; Portable crushing Attachment 2
and screening plants; Power blade support; Roller
operator,
asphalt; Rubber-tired scraper, self-loading (paddle-
wheels,
etc.); Rubber- tired earthmoving equipment (scrapers);
Slip
form paver (concrete); Small tractor with drag; Soil
stabilizer (P & H or equal); Spider plow and spider
puller;
Tubex pile rig; Unlicensed constuction work boat
operator,
on site; Timber skidder; Track loader up to 4 yds.;
Tractor-drawn scraper; Tractor, compressor drill
combination; Welder; Woods-Mixer (and other similar
Pugmill
equipment)
GROUP 5: Cast-in-place pipe laying machine; Combination slusher and motor operator; Concrete conveyor or concrete pump, truck or equipment mounted; Concrete conveyor,
building site; Concrete pump or pumpcrete gun; Drilling equipment, Watson 2000, Texoma 700 or similar; Drilling and
boring machinery, horizontal (not to apply to
waterliners,
wagon drills or jackhammers); Concrete mixer/all; Person and/or material hoist; Mechanical finishers (concrete)
(Clary, Johnson, Bidwell Bridge Deck or similar types); Mechanical burm, curb and/or curb and gutter machine,
concrete or asphalt); Mine or shaft hoist; Portable
crusher; Power jumbo operator (setting slip-forms, etc., in
tunnels); Screed (automatic or manual); Self-propelled
compactor with dozer; Tractor with boom D6 or smaller;
Trenching machine, maximum digging capacity over 5 ft.
depth; Vermeer T-600B rock cutter or similar
GROUP 6: Armor-Coater (or similar); Ballast jack tamper; Boom- type backfilling machine; Assistant plant engineer; Bridge and/or gantry crane; Chemical grouting machine,
truck-mounted; Chip spreading machine operator; Concrete saw (self-propelled unit on streets, highways, airports and
canals); Deck engineer; Drilling equipment Texoma 600,
Attachment 2
Hughes 200 Series or similar up to and including 30 ft. m.r.c.; Drill doctor; Helicopter radio operator;
Hydro-hammer or similar; Line master; Skidsteer loader, Bobcat larger than 743 series or similar (with
attachments); Locomotive; Lull hi-lift or similar; Oiler, truck mounted equipment; Pavement breaker, truck-mounted, with compressor combination; Paving fabric installation and/or laying machine; Pipe bending machine (pipelines
only); Pipe wrapping machine (tractor propelled and
supported); Screed (except asphaltic concrete paving);
Self- propelled pipeline wrapping machine; Tractor;
Self-loading chipper; Concrete barrier moving machine
GROUP 7: Ballast regulator; Boom truck or dual-purpose
A-frame truck, non-rotating - under 15 tons; Cary lift or similar; Combination slurry mixer and/or cleaner;
Drilling
equipment, 20 ft. and under m.r.c.; Firetender (hot
plant);
Grouting machine operator; Highline cableway
signalperson;
Stationary belt loader (Kolman or similar); Lift slab
machine (Vagtborg and similar types); Maginnes internal full slab vibrator; Material hoist (1 drum); Mechanical trench shield; Pavement breaker with or without
compressor
combination); Pipe cleaning machine (tractor propelled
and
supported); Post driver; Roller (except asphalt); Chip
Seal; Self-propelled automatically applied concrete
curing
mahcine (on streets, highways, airports and canals);
Self-propelled compactor (without dozer); Signalperson; Slip-form pumps (lifting device for concrete forms); Tie spacer; Tower mobile; Trenching machine, maximum digging capacity up to and including 5 ft. depth; Truck- type
loader
GROUP 8: Bit sharpener; Boiler tender; Box operator;
Brakeperson; Combination mixer and compressor
(shotcrete/gunite); Compressor operator; Deckhand; Fire tender; Forklift (under 20 ft.); Generator;
Gunite/shotcrete equipment operator; Hydraulic monitor; Ken
Attachment 2
seal machine (or similar); Mixermobile; Oiler; Pump
operator; Refrigeration plant; Reservoir-debris tug
(self-
propelled floating); Ross Carrier (construction site);
Rotomist operator; Self-propelled tape machine;
Shuttlecar;
Self-propelled power sweeper operator (includes vacuum
sweeper); Slusher operator; Surface heater;
Switchperson;
Tar pot firetender; Tugger hoist, single drum; Vacuum
cooling plant; Welding machine (powered other than by
electricity)
GROUP 8-A: Elevator operator; Skidsteer loader-Bobcat 743 series or smaller, and similar (without attachments);
Mini
excavator under 25 H.P. (backhoe-trencher); Tub grinder wood chipper
----------------------------------------------------------
ALL CRANES AND ATTACHMENTS
GROUP 1: Clamshell and dragline over 7 cu. yds.; Crane, over
100 tons; Derrick, over 100 tons; Derrick barge
pedestal-mounted, over 100 tons; Self-propelled boom-type lifting device, over 100 tons
GROUP 2: Clamshell and dragline over 1 cu. yd. up to and including 7 cu. yds.; Crane, over 45 tons up to and
including 100 tons; Derrick barge, 100 tons and under;
Self-propelled boom-type lifting device, over 45 tons;
Tower crane
GROUP 3: Clamshell and dragline up to and including 1 cu. yd.; Cranes 45 tons and under; Self-propelled boom-type lifting device 45 tons and under;
GROUP 4: Boom Truck or dual purpose A-frame truck,
non-rotating over 15 tons; Truck-mounted rotating
telescopic boom type lifting device, Manitex or similar (boom truck) over 15 tons; Truck-mounted rotating
telescopic boom type lifting device, Manitex or similar Attachment 2
(boom truck) - under 15 tons;
-----------------------------------------------------------
PILEDRIVERS
GROUP 1: Derrick barge pedestal mounted over 100 tons;
Clamshell over 7 cu. yds.; Self-propelled boom-type
lifting
device over 100 tons; Truck crane or crawler, land or
barge
mounted over 100 tons
GROUP 2: Derrick barge pedestal mounted 45 tons to and
including 100 tons; Clamshell up to and including 7 cu. yds.; Self-propelled boom-type lifting device over 45
tons;
Truck crane or crawler, land or barge mounted, over 45
tons
up to and including 100 tons; Fundex F-12 hydraulic pile rig
GROUP 3: Derrick barge pedestal mounted under 45 tons;
Self-
propelled boom-type lifting device 45 tons and under;
Skid/scow piledriver, any tonnage; Truck crane or
crawler,
land or barge mounted 45 tons and under
GROUP 4: Assistant operator in lieu of assistant to
engineer;
Forklift, 10 tons and over; Heavy-duty
repairperson/welder
GROUP 5: Deck engineer
GROUP 6: Deckhand; Fire tender
----------------------------------------------------------- --
STEEL ERECTORS
Attachment 2
GROUP 1: Crane over 100 tons; Derrick over 100 tons;
Self-
propelled boom-type lifting device over 100 tons
GROUP 2: Crane over 45 tons to 100 tons; Derrick under
100
tons; Self-propelled boom-type lifting device over 45
tons
to 100 tons; Tower crane
GROUP 3: Crane, 45 tons and under; Self-propelled boom- type
lifting device, 45 tons and under
GROUP 4: Chicago boom; Forklift, 10 tons and over; Heavy- duty
repair person/welder
GROUP 5: Boom cat
--------------------------------------------------------- -----
--
TUNNEL AND UNDERGROUND WORK
GROUP 1-A: Tunnel bore machine operator, 20' diameter or more
GROUP 1: Heading shield operator; Heavy-duty
repairperson;
Mucking machine (rubber tired, rail or track type);
Raised
bore operator (tunnels); Tunnel mole bore operator
GROUP 2: Combination slusher and motor operator; Concrete pump or pumpcrete gun; Power jumbo operator
GROUP 3: Drill doctor; Mine or shaft hoist
GROUP 4: Combination slurry mixer cleaner; Grouting
Machine
operator; Motorman
Attachment 2
GROUP 5: Bit Sharpener; Brakeman; Combination mixer and compressor (gunite); Compressor operator; Oiler; Pump
operator; Slusher operator
-----------------------------------------------------------
AREA DESCRIPTIONS:
POWER EQUIPMENT OPERATORS, CRANES AND ATTACHMENTS,TUNNEL AND
UNDERGROUND [These areas do not apply to Piledrivers and Steel Erectors]
AREA 1: ALAMEDA, CALAVERAS, CONTRA COSTA, FRESNO, KINGS,
MADERA, MARIPOSA, MERCED, MONTEREY, SAN BENITO, SAN
FRANCISCO, SAN JOAQUIN, SAN MATEO, SANTA CLARA, SANTA
CRUZ,
STANISLAUS, TUOLUMNE
AREA 2 -NOTED BELOW
THE REMAINING COUNTIES ARE SPLIT BETWEEN AREA 1 AND AREA 2 AS
NOTED BELOW:
CALAVERAS COUNTY:
Area 1: Remainder
Area 2: Eastern Part
FRESNO COUNTY:
Area 1: Remainder
Area 2: Eastern Part
MADERA COUNTY:
Area 1: Remainder
Area 2: Eastern Part
MARIPOSA COUNTY:
Area 1: Remainder
Area 2: Eastern Part
MONTEREY COUNTY:
Area 1: Remainder
Area 2: Southwestern part
Attachment 2
TUOLUMNE COUNTY:
Area 1: Remainder
Area 2: Eastern Part
----------------------------------------------------------- -----
ENGI0003-008 07/20/2020
Rates Fringes
Dredging: (DREDGING:
CLAMSHELL & DIPPER DREDGING;
HYDRAULIC SUCTION DREDGING:)
AREA 1:
(1) Leverman...............$ 49.88 34.35
(2) Dredge Dozer; Heavy
duty repairman.............$ 44.92 34.35
(3) Booster Pump
Operator; Deck
Engineer; Deck mate;
Dredge Tender; Winch
Operator...................$ 43.80 34.35
(4) Bargeman; Deckhand;
Fireman; Leveehand; Oiler..$ 40.50 34.35
AREA 2:
(1) Leverman...............$ 51.88 34.35
(2) Dredge Dozer; Heavy
duty repairman.............$ 46.92 34.35
(3) Booster Pump
Operator; Deck
Engineer; Deck mate;
Dredge Tender; Winch
Operator...................$ 45.80 34.35
(4) Bargeman; Deckhand;
Fireman; Leveehand; Oiler..$ 42.50 34.35
AREA DESCRIPTIONS
AREA 1: ALAMEDA,BUTTE, CONTRA COSTA, KINGS, MARIN,
MERCED,
NAPA, SACRAMENTO, SAN BENITO, SAN FRANCISCO, SAN JOAQUIN,
SAN MATEO, SANTA CLARA, SANTA CRUZ, SOLANO, STANISLAUS,
SUTTER, YOLO, AND YUBA COUNTIES
Attachment 2
AREA 2: MODOC COUNTY
THE REMAINGING COUNTIES ARE SPLIT BETWEEN AREA 1 AND AREA 2 AS NOTED BELOW:
ALPINE COUNTY:
Area 1: Northernmost part
Area 2: Remainder
CALAVERAS COUNTY:
Area 1: Remainder
Area 2: Eastern part
COLUSA COUNTY:
Area 1: Eastern part
Area 2: Remainder
ELDORADO COUNTY:
Area 1: North Central part
Area 2: Remainder
FRESNO COUNTY:
Area 1: Remainder
Area 2: Eastern part
GLENN COUNTY:
Area 1: Eastern part
Area 2: Remainder
LASSEN COUNTY:
Area 1: Western part along the Southern portion of
border
with Shasta County
Area 2: Remainder
MADERA COUNTY:
Area 1: Except Eastern part
Area 2: Eastern part
MARIPOSA COUNTY
Area 1: Except Eastern part
Area 2: Eastern part
Attachment 2
MONTERREY COUNTY
Area 1: Except Southwestern part
Area 2: Southwestern part
NEVADA COUNTY:
Area 1: All but the Northern portion along the border of Sierra County
Area 2: Remainder
PLACER COUNTY:
Area 1: Al but the Central portion
Area 2: Remainder
PLUMAS COUNTY:
Area 1: Western portion
Area 2: Remainder
SHASTA COUNTY:
Area 1: All but the Northeastern corner
Area 2: Remainder
SIERRA COUNTY:
Area 1: Western part
Area 2: Remainder
SISKIYOU COUNTY:
Area 1: Central part
Area 2: Remainder
SONOMA COUNTY:
Area 1: All but the Northwestern corner
Area 2: Remainder
TEHAMA COUNTY:
Area 1: All but the Western border with Mendocino &
Trinity
Counties
Area 2: Remainder
TRINITY COUNTY:
Area 1: East Central part and the Northeastern border
with
Shasta County
Area 2: Remainder
Attachment 2
TUOLUMNE COUNTY:
Area 1: Except Eastern part
Area 2: Eastern part
----------------------------------------------------------- -----
ENGI0003-019 06/29/2020
SEE AREA DESCRIPTIONS BELOW
Rates Fringes
OPERATOR: Power Equipment
(LANDSCAPE WORK ONLY)
GROUP 1
AREA 1.....................$ 39.95 30.28
AREA 2.....................$ 41.95 30.28
GROUP 2
AREA 1.....................$ 36.35 30.28
AREA 2.....................$ 38.35 30.28
GROUP 3
AREA 1.....................$ 31.74 30.28
AREA 2.....................$ 33.74 30.28
GROUP DESCRIPTIONS:
GROUP 1: Landscape Finish Grade Operator: All finish
grade
work regardless of equipment used, and all equipment with a
rating more than 65 HP.
GROUP 2: Landscape Operator up to 65 HP: All equipment with
a manufacturer's rating of 65 HP or less except equipment covered by Group 1 or Group 3. The following equipment shall be included except when used for finish work as
long
as manufacturer's rating is 65 HP or less: A-Frame and
Winch Truck, Backhoe, Forklift, Hydragraphic Seeder
Machine, Roller, Rubber-Tired and Track Earthmoving
Equipment, Skiploader, Straw Blowers, and Trencher 31 HP up
Attachment 2
to 65 HP.
GROUP 3: Landscae Utility Operator: Small Rubber-Tired
Tractor, Trencher Under 31 HP.
AREA DESCRIPTIONS:
AREA 1: ALAMEDA, BUTTE, CONTRA COSTA, KINGS, MARIN,
MERCED,
NAPA, SACRAMENTO, SAN BENITO, SAN FRANCISCO, SAN JOAQUIN,
SAN MATEO, SANTA CLARA, SANTA CRUZ, SOLANO, STANISLAUS,
SUTTER, YOLO, AND YUBA COUNTIES
AREA 2 - MODOC COUNTY
THE REMAINING COUNTIES ARE SPLIT BETWEEN AREA 1 AND AREA 2 AS
NOTED BELOW:
ALPINE COUNTY:
Area 1: Northernmost part
Area 2: Remainder
CALAVERAS COUNTY:
Area 1: Except Eastern part
Area 2: Eastern part
COLUSA COUNTY:
Area 1: Eastern part
Area 2: Remainder
DEL NORTE COUNTY:
Area 1: Extreme Southwestern corner
Area 2: Remainder
ELDORADO COUNTY:
Area 1: North Central part
Area 2: Remainder
FRESNO COUNTY
Area 1: Except Eastern part
Area 2: Eastern part
GLENN COUNTY:
Attachment 2
Area 1: Eastern part
Area 2: Remainder
HUMBOLDT COUNTY:
Area 1: Except Eastern and Southwestern parts
Area 2: Remainder
LAKE COUNTY:
Area 1: Southern part
Area 2: Remainder
LASSEN COUNTY:
Area 1: Western part along the Southern portion of border with Shasta County
Area 2: Remainder
MADERA COUNTY
Area 1: Remainder
Area 2: Eastern part
MARIPOSA COUNTY
Area 1: Remainder
Area 2: Eastern part
MENDOCINO COUNTY:
Area 1: Central and Southeastern parts
Area 2: Remainder
MONTEREY COUNTY
Area 1: Remainder
Area 2: Southwestern part
NEVADA COUNTY:
Area 1: All but the Northern portion along the border of Sierra County
Area 2: Remainder
PLACER COUNTY:
Area 1: All but the Central portion
Area 2: Remainder
PLUMAS COUNTY:
Area 1: Western portion
Area 2: Remainder
Attachment 2
SHASTA COUNTY:
Area 1: All but the Northeastern corner
Area 2: Remainder
SIERRA COUNTY:
Area 1: Western part
Area 2: Remainder
SISKIYOU COUNTY:
Area 1: Central part
Area 2: Remainder
SONOMA COUNTY:
Area 1: All but the Northwestern corner
Area 2: Reaminder
TEHAMA COUNTY:
Area 1: All but the Western border with mendocino &
Trinity
Counties
Area 2: Remainder
TRINITY COUNTY:
Area 1: East Central part and the Northeaster border with Shasta County
Area 2: Remainder
TULARE COUNTY;
Area 1: Remainder
Area 2: Eastern part
TUOLUMNE COUNTY:
Area 1: Remainder
Area 2: Eastern Part
----------------------------------------------------------- -----
IRON0377-001 07/01/2021
ALAMEDA, CONTRA COSTA, SAN MATEO, SANTA CLARA & SAN
FRANCISCO
COUNTIES
Attachment 2
Rates Fringes
Ironworkers:
Fence Erector...............$ 38.08 24.91
Ornamental, Reinforcing
and Structural..............$ 45.73 33.55
PREMIUM PAY:
$6.00 additional per hour at the following locations:
China Lake Naval Test Station, Chocolate Mountains Naval Reserve-Niland,
Edwards AFB, Fort Irwin Military Station, Fort Irwin
Training
Center-Goldstone, San Clemente Island, San Nicholas Island, Susanville Federal Prison, 29 Palms - Marine Corps, U.S.
Marine
Base - Barstow, U.S. Naval Air Facility - Sealey,
Vandenberg AFB
$4.00 additional per hour at the following locations:
Army Defense Language Institute - Monterey, Fallon Air
Base,
Naval Post Graduate School - Monterey, Yermo Marine Corps Logistics Center
$2.00 additional per hour at the following locations:
Port Hueneme, Port Mugu, U.S. Coast Guard Station - Two Rock
----------------------------------------------------------- -----
IRON0433-005 07/01/2020
REMAINING COUNTIES
Rates Fringes
IRONWORKER
Attachment 2
Fence Erector...............$ 34.58 24.81
Ornamental, Reinforcing
and Structural..............$ 41.00 33.45
PREMIUM PAY:
$6.00 additional per hour at the following locations:
China Lake Naval Test Station, Chocolate Mountains Naval Reserve-Niland,
Edwards AFB, Fort Irwin Military Station, Fort Irwin
Training
Center-Goldstone, San Clemente Island, San Nicholas Island, Susanville Federal Prison, 29 Palms - Marine Corps, U.S.
Marine
Base - Barstow, U.S. Naval Air Facility - Sealey,
Vandenberg AFB
$4.00 additional per hour at the following locations:
Army Defense Language Institute - Monterey, Fallon Air
Base,
Naval Post Graduate School - Monterey, Yermo Marine Corps Logistics Center
$2.00 additional per hour at the following locations:
Port Hueneme, Port Mugu, U.S. Coast Guard Station - Two Rock
----------------------------------------------------------- -----
LABO0067-002 06/28/2021
AREA ""A"" - ALAMEDA, CONTRA COSTA, SAN FRANCISCO, SAN
MATEO AND
SANTA CLARA COUNTIES
AREA ""B"" - CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA,
MERCED, MONTEREY, SAN BENITO, SAN JOAQUIN, STANISLAUS, AND
TUOLUMNE COUNTIES
Attachment 2
Rates Fringes
Asbestos Removal Laborer
All Counties................$ 26.05 12.75
LABORER (Lead Removal)
Area A......................$ 34.37 25.95
Area B......................$ 33.37 25.95
ASBESTOS REMOVAL-SCOPE OF WORK: Site mobilization;
initial
site clean-up; site preparation; removal of
asbestos-containing materials from walls and ceilings; or from pipes, boilers and mechanical systems only if they are
being scrapped; encapsulation, enclosure and disposal of asbestos-containing materials by hand or with equipment or
machinery; scaffolding; fabrication of temporary wooden barriers; and assembly of decontamination stations.
----------------------------------------------------------- -----
LABO0073-002 06/28/2021
CALAVERAS AND SAN JOAQUIN COUNTIES
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 33.48 26.21
Traffic Control Person I....$ 33.78 26.21
Traffic Control Person II...$ 31.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
Attachment 2
LABO0073-003 07/01/2021
SAN JOAQUIN COUNTY
Rates Fringes
LABORER
Mason Tender-Brick..........$ 34.09 24.41
----------------------------------------------------------- -----
LABO0073-005 07/01/2021
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 42.00 25.71
GROUP 2.....................$ 41.77 25.71
GROUP 3.....................$ 41.52 25.71
GROUP 4.....................$ 41.07 25.71
GROUP 5.....................$ 40.53 25.71
Shotcrete Specialist........$ 42.52 25.71
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Attachment 2
Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0073-007 06/25/2018
CALAVERAS AND SAN JOAQUIN COUNTIES
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS)
Construction Specialist
Group.......................$ 30.49 23.20
GROUP 1.....................$ 29.79 23.20
GROUP 1-a...................$ 30.01 23.20
GROUP 1-c...................$ 29.84 23.20
GROUP 1-e...................$ 30.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 2.....................$ 29.64 23.20
GROUP 3.....................$ 29.54 23.20
GROUP 4.....................$ 23.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS)
(1) New Construction........$ 29.54 23.20
(2) Establishment Warranty
Period......................$ 23.23 23.20
LABORER (GUNITE)
GROUP 1.....................$ 29.75 22.31
GROUP 2.....................$ 29.25 22.31
GROUP 3.....................$ 28.66 22.31
GROUP 4.....................$ 28.54 22.31
LABORER (WRECKING)
GROUP 1.....................$ 29.79 23.20
GROUP 2.....................$ 29.64 23.20
Attachment 2
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
Attachment 2
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
Attachment 2
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
Attachment 2
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
Attachment 2
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO0073-009 07/01/2021
CALAVERAS AND SAN JOAQUIN COUNTIES
Rates Fringes
LABORER (Plaster Tender).........$ 35.82 28.45
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO0261-003 06/28/2021
SAN FRANCISCO AND SAN MATEO COUNTIES
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 34.48 26.21
Traffic Control Person I....$ 34.78 26.21
Traffic Control Person II...$ 32.28 26.21
Attachment 2
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO0261-005 07/01/2021
SAN FRANCISCO AND SAN MATEO COUNTIES
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 42.00 25.71
GROUP 2.....................$ 41.77 25.71
GROUP 3.....................$ 41.52 25.71
GROUP 4.....................$ 41.07 25.71
GROUP 5.....................$ 40.53 25.71
Shotcrete Specialist........$ 42.52 25.71
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
Attachment 2
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0261-009 06/25/2018
SAN FRANCISCO, AND SAN MATEO COUNTIES
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA A:)
Construction Specialist
Group.......................$ 31.49 23.20
GROUP 1.....................$ 30.79 23.20
GROUP 1-a...................$ 31.01 23.20
GROUP 1-c...................$ 30.84 23.20
GROUP 1-e...................$ 31.34 23.20
GROUP 1-f...................$ 31.37 23.20
GROUP 2.....................$ 30.64 23.20
GROUP 3.....................$ 30.54 23.20
GROUP 4.....................$ 24.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA A:)
(1) New Construction........$ 30.54 23.20
(2) Establishment Warranty
Period......................$ 24.23 23.20
LABORER (WRECKING - AREA A:)
GROUP 1.....................$ 30.79 23.20
GROUP 2.....................$ 30.64 23.20
Laborers: (GUNITE - AREA A:)
GROUP 1.....................$ 30.75 22.31
GROUP 2.....................$ 30.25 22.31
Attachment 2
GROUP 3.....................$ 29.66 22.31
GROUP 4.....................$ 29.54 22.31
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
Attachment 2
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
Attachment 2
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and Attachment 2
grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
Attachment 2
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO0261-011 07/01/2021
SAN FRANCISCO AND SAN MATEO COUNTIES:
Rates Fringes
MASON TENDER, BRICK..............$ 34.85 26.32
FOOTNOTES: Underground work such as sewers, manholes,
catch
basins, sewer pipes, telephone conduits, tunnels and cut trenches: $5.00 per day additional. Work in live sewage:
$2.50 per day additional.
----------------------------------------------------------- -----
LABO0261-014 07/01/2021
Attachment 2
SAN FRANCISCO AND SAN MATEO COUNTIES:
Rates Fringes
PLASTER TENDER...................$ 38.28 29.43
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO0270-003 06/28/2021
AREA A: SANTA CLARA
AREA B: MONTEREY, SAN BENITO AND SANTA CRUZ COUNTIES
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person
Area A.....................$ 34.48 26.21
Area B.....................$ 33.48 26.21
Traffic Control Person I
Area A.....................$ 34.78 26.21
Area B.....................$ 33.78 26.21
Traffic Control Person II
Area A.....................$ 32.28 26.21
Area B.....................$ 31.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO0270-004 07/01/2021
MONTEREY, SAN BENITO, SANTA CLARA, AND SANTA CRUZ COUNTIES
Attachment 2
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 42.00 25.71
GROUP 2.....................$ 41.77 25.71
GROUP 3.....................$ 41.52 25.71
GROUP 4.....................$ 41.07 25.71
GROUP 5.....................$ 40.53 25.71
Shotcrete Specialist........$ 42.52 25.71
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0270-005 07/01/2021
Attachment 2
MONTEREY AND SAN BENITO COUNTIES
Rates Fringes
LABORER
Mason Tender-Brick..........$ 34.09 24.41
----------------------------------------------------------- -----
LABO0270-007 06/25/2018
MONTEREY, SAN BENITO, AND SANTA CRUZ, COUNTIES
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA B)
Construction Specialist
Group.......................$ 30.40 23.20
GROUP 1.....................$ 29.79 23.20
GROUP 1-a...................$ 30.01 23.20
GROUP 1-c...................$ 29.84 23.20
GROUP 1-e...................$ 30.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 2.....................$ 29.64 23.20
GROUP 3.....................$ 29.54 23.20
GROUP 4.....................$ 23.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA B)
(1) New Construction........$ 29.54 23.20
(2) Establishment Warranty
Period......................$ 23.23 23.20
LABORER (GUNITE - AREA B)
GROUP 1.....................$ 29.75 22.31
GROUP 2.....................$ 29.25 22.31
GROUP 3.....................$ 28.66 22.31
GROUP 4.....................$ 28.54 22.31
LABORER (WRECKING - AREA B)
GROUP 1.....................$ 29.79 23.20
GROUP 2.....................$ 29.64 23.20
FOOTNOTES:
Attachment 2
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
Attachment 2
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, Attachment 2
large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
Attachment 2
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
Attachment 2
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO0270-010 06/25/2018
SANTA CLARA COUNTY
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA A:)
Construction Specialist
Group.......................$ 31.49 23.20
GROUP 1.....................$ 30.79 23.20
GROUP 1-a...................$ 31.01 23.20
GROUP 1-c...................$ 30.84 23.20
GROUP 1-e...................$ 31.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 2.....................$ 30.64 23.20
GROUP 3.....................$ 30.54 23.20
GROUP 4.....................$ 24.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA A:)
(1) New Construction........$ 30.54 23.20
(2) Establishment Warranty
Attachment 2
Period......................$ 24.23 23.20
LABORER (GUNITE - AREA A:)
GROUP 1.....................$ 30.75 22.31
GROUP 2.....................$ 30.25 22.31
GROUP 3.....................$ 29.66 22.31
GROUP 4.....................$ 29.54 22.31
LABORER (WRECKING - AREA A:)
GROUP 1.....................$ 30.79 23.20
GROUP 2.....................$ 30.64 23.20
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, Attachment 2
aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
Attachment 2
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
Attachment 2
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be Attachment 2
salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO0270-011 07/01/2017
MONTEREY, SAN BENITO, SANTA CRUZ, SANTA CLARA COUNTIES
Rates Fringes
LABORER (Plaster Tender).........$ 34.70 21.22
Work on a swing stage scaffold: $1.00 per hour additional.
Attachment 2
----------------------------------------------------------- -----
LABO0294-001 07/01/2020
FRESNO, KINGS AND MADERA COUNTIES
Rates Fringes
LABORER (Brick)
Mason Tender-Brick..........$ 32.84 23.71
----------------------------------------------------------- -----
LABO0294-002 06/28/2021
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 33.48 26.21
Traffic Control Person I....$ 33.78 26.21
Traffic Control Person II...$ 31.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO0294-005 07/01/2021
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 42.00 25.71
GROUP 2.....................$ 41.77 25.71
GROUP 3.....................$ 41.52 25.71
Attachment 2
GROUP 4.....................$ 41.07 25.71
GROUP 5.....................$ 40.53 25.71
Shotcrete Specialist........$ 42.52 25.71
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0294-008 06/25/2018
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA B:)
Attachment 2
Construction Specialist
Group.......................$ 30.49 23.20
GROUP 1.....................$ 29.79 23.20
GROUP 1-a...................$ 30.01 23.20
GROUP 1-c...................$ 29.84 23.20
GROUP 1-e...................$ 30.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 2.....................$ 29.64 23.20
GROUP 3.....................$ 29.54 23.20
GROUP 4.....................$ 23.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA B:)
(1) New Construction........$ 29.54 23.20
(2) Establishment Warranty
Period......................$ 23.23 23.20
LABORER (GUNITE - AREA B:)
GROUP 1.....................$ 29.75 22.31
GROUP 2.....................$ 29.25 22.31
GROUP 3.....................$ 28.66 22.31
GROUP 4.....................$ 28.54 22.31
LABORER (WRECKING - AREA B:)
GROUP 1.....................$ 29.79 23.20
GROUP 2.....................$ 29.64 23.20
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
Attachment 2
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and Attachment 2
rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after Attachment 2
the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction Attachment 2
track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
Attachment 2
materials)
----------------------------------------------------------- -----
LABO0294-010 07/01/2021
CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA, MERCED, SAN
JOAQUIN, STANISLAUS & TUOLUMNE
Rates Fringes
Plasterer tender.................$ 35.82 28.45
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO0294-011 07/01/2021
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
LABORER (Plaster Tender).........$ 35.82 28.45
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO0304-002 06/28/2021
ALAMEDA COUNTY
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 34.48 26.21
Traffic Control Person I....$ 34.78 26.21
Traffic Control Person II...$ 32.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
Attachment 2
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO0304-003 07/01/2021
ALAMEDA COUNTY
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 42.00 25.71
GROUP 2.....................$ 41.77 25.71
GROUP 3.....................$ 41.52 25.71
GROUP 4.....................$ 41.07 25.71
GROUP 5.....................$ 40.53 25.71
Shotcrete Specialist........$ 42.52 25.71
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
Attachment 2
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0304-004 06/25/2018
ALAMEDA COUNTY
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA A:)
Construction Specialist
Group.......................$ 31.49 23.20
GROUP 1.....................$ 30.79 23.20
GROUP 1-a...................$ 31.01 23.20
GROUP 1-c...................$ 30.84 23.20
GROUP 1-e...................$ 31.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 2.....................$ 30.64 23.20
GROUP 3.....................$ 30.54 23.20
GROUP 4.....................$ 24.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA A:)
(1) New Construction........$ 30.54 23.20
(2) Establishment Warranty
Period......................$ 24.23 23.20
LABORER (GUNITE - AREA A:)
GROUP 1.....................$ 30.75 22.31
GROUP 2.....................$ 30.25 22.31
GROUP 3.....................$ 29.66 22.31
GROUP 4.....................$ 29.54 22.31
LABORER (WRECKING - AREA A:)
GROUP 1.....................$ 30.79 23.20
GROUP 2.....................$ 30.64 23.20
FOOTNOTES:
Attachment 2
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
Attachment 2
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, Attachment 2
large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
Attachment 2
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
Attachment 2
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO0304-005 05/01/2018
ALAMEDA COUNTY
Rates Fringes
Brick Tender.....................$ 35.37 20.70
FOOTNOTES: Work on jobs where heat-protective clothing is required: $2.00 per hour additional. Work at grinders:
$.25
per hour additional. Manhole work: $2.00 per day
additional.
----------------------------------------------------------- -----
LABO0304-008 07/01/2017
ALAMEDA AND CONTRA COSTA COUNTIES:
Rates Fringes
Plasterer tender.................$ 34.70 23.11
Attachment 2
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO0324-002 06/28/2021
CONTRA COSTA COUNTY
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 34.48 26.21
Traffic Control Person I....$ 34.78 26.21
Traffic Control Person II...$ 32.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO0324-006 06/25/2018
CONTRA COSTA COUNTY
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 37.82 24.11
GROUP 2.....................$ 37.59 24.11
GROUP 3.....................$ 37.34 24.11
GROUP 4.....................$ 36.89 24.11
GROUP 5.....................$ 36.35 24.11
Shotcrete Specialist........$ 38.34 24.11
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
Attachment 2
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO0324-012 06/25/2018
CONTRA COSTA COUNTY
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA A:)
Construction Specialist
Group.......................$ 31.49 23.20
GROUP 1.....................$ 30.79 23.20
GROUP 1-a...................$ 31.01 23.20
GROUP 1-c...................$ 30.84 23.20
GROUP 1-e...................$ 31.34 23.20
GROUP 1-f...................$ 30.37 23.20
GROUP 1-g...................$ 30.99 23.20
GROUP 2.....................$ 30.64 23.20
Attachment 2
GROUP 3.....................$ 30.54 23.20
GROUP 4.....................$ 24.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULURAL & LANDSCAPE
LABORERS - AREA A:)
(1) New Construction........$ 30.54 23.20
(2) Establishment Warranty
Period......................$ 24.23 23.20
LABORER (GUNITE - AREA A:)
GROUP 1.....................$ 30.75 22.31
GROUP 2.....................$ 30.25 22.31
GROUP 3.....................$ 29.66 22.31
GROUP 4.....................$ 29.54 22.31
LABORER (WRECKING - AREA A:)
GROUP 1.....................$ 30.79 23.20
GROUP 2.....................$ 30.64 23.20
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Attachment 2
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Attachment 2
Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep Attachment 2
footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 1-g, CONTRA COSTA COUNTY: Pipelayer (including
grade
checking in connection with pipelaying); Caulker; Bander; Pipewrapper; Conduit layer; Plastic pipe layer; Pressure pipe tester; No joint pipe and stripping of same,
including
repair of voids; Precast manhole setters, cast in place manhole form setters
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction Attachment 2
track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
Attachment 2
materials)
GROUP 1-g, CONTRA COSTA COUNTY: Pipelayer (including grade checking in connection with pipelaying); Caulker; Bander; Pipewrapper; Conduit layer; Plastic pipe layer; Pressure pipe tester; No joint pipe and stripping of same,
including
repair of voids; Precast manhole setters, cast in place manhole form setters
----------------------------------------------------------- -----
LABO0324-014 05/01/2018
CONTRA COSTA COUNTY:
Rates Fringes
Brick Tender.....................$ 35.37 20.70
FOOTNOTES: Work on jobs where heat-protective clothing is required: $2.00 per hour additional. Work at grinders:
$.25
per hour additional. Manhole work: $2.00 per day
additional.
----------------------------------------------------------- -----
LABO0324-018 07/01/2021
ALAMEDA AND CONTRA COSTA COUNTIES:
Rates Fringes
Plasterer tender.................$ 38.28 29.43
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO1130-002 06/28/2021
MARIPOSA, MERCED, STANISLAUS, AND TUOLUMNE COUNTIES
Attachment 2
Rates Fringes
LABORER (TRAFFIC CONTROL/LANE
CLOSURE)
Escort Driver, Flag Person..$ 33.48 26.21
Traffic Control Person I....$ 33.78 26.21
Traffic Control Person II...$ 31.28 26.21
TRAFFIC CONTROL PERSON I: Layout of traffic control,
crash
cushions, construction area and roadside signage.
TRAFFIC CONTROL PERSON II: Installation and removal of
temporary/permanent signs, markers, delineators and crash cushions.
----------------------------------------------------------- -----
LABO1130-003 06/26/2017
MARIPOSA, MERCED, STANISLAUS, AND TUOLUMNE COUNTIES
Rates Fringes
Tunnel and Shaft Laborers:
GROUP 1.....................$ 36.60 24.83
GROUP 2.....................$ 36.37 24.83
GROUP 3.....................$ 36.12 24.83
GROUP 4.....................$ 35.67 24.83
GROUP 5.....................$ 35.13 24.83
Shotcrete Specialist........$ 37.12 24.83
TUNNEL AND SHAFT CLASSIFICATIONS
GROUP 1: Diamond driller; Groundmen; Gunite and shotcrete nozzlemen
GROUP 2: Rodmen; Shaft work & raise (below actual or
excavated ground level)
GROUP 3: Bit grinder; Blaster, driller, powdermen,
heading;
Cherry pickermen - where car is lifted; Concrete finisher in tunnel; Concrete screedman; Grout pumpman and potman; Attachment 2
Gunite & shotcrete gunman & potman; Headermen; High
pressure nozzleman; Miner - tunnel, including top and
bottom man on shaft and raise work; Nipper; Nozzleman on slick line; Sandblaster - potman, Robotic Shotcrete
Placer,
Segment Erector, Tunnel Muck Hauler, Steel Form raiser
and
setter; Timberman, retimberman (wood or steel or
substitute
materials therefore); Tugger (for tunnel laborer work); Cable tender; Chuck tender; Powderman - primer house
GROUP 4: Vibrator operator, pavement breaker; Bull gang - muckers, trackmen; Concrete crew - includes rodding and spreading, Dumpmen (any method)
GROUP 5: Grout crew; Reboundman; Swamper/ Brakeman
----------------------------------------------------------- -----
LABO1130-005 07/01/2018
MARIPOSA, MERCED, STANISLAUS AND TUOLUMNE COUNTIES
Rates Fringes
LABORER
Mason Tender-Brick..........$ 31.20 22.20
----------------------------------------------------------- -----
LABO1130-007 06/25/2018
MARIPOSA, MERCED, STANISLAUS, AND TUOLUMNE , COUNTIES
Rates Fringes
LABORER (CONSTRUCTION CRAFT
LABORERS - AREA B:)
Construction Specialist
Group.......................$ 30.49 23.20
GROUP 1.....................$ 29.79 23.20
GROUP 1-a...................$ 30.01 23.20
GROUP 1-c...................$ 29.84 23.20
GROUP 1-e...................$ 30.34 23.20
Attachment 2
GROUP 1-f...................$ 29.37 23.20
GROUP 2.....................$ 29.64 23.20
GROUP 3.....................$ 29.54 23.20
GROUP 4.....................$ 23.23 23.20
See groups 1-b and 1-d under laborer classifications.
LABORER (GARDENERS,
HORTICULTURAL & LANDSCAPE
LABORERS - AREA B:)
(1) New Construction........$ 29.54 23.20
(2) Establishment Warranty
Period......................$ 23.23 23.20
LABORER (GUNITE - AREA B:)
GROUP 1.....................$ 29.75 22.31
GROUP 2.....................$ 29.25 22.31
GROUP 3.....................$ 28.66 22.31
GROUP 4.....................$ 28.54 22.31
LABORER (WRECKING - AREA B:)
GROUP 1.....................$ 29.79 23.20
GROUP 2.....................$ 29.64 23.20
FOOTNOTES:
Laborers working off or with or from bos'n chairs,
swinging
scaffolds, belts shall receive $0.25 per hour above the applicable wage rate. This shall not apply to workers
entitled to receive the wage rate set forth in Group 1-a below.
---------------------------------------------------------
LABORER CLASSIFICATIONS
CONSTRUCTION SPECIALIST GROUP: Asphalt ironer and raker; Chainsaw; Laser beam in connection with laborers' work; Cast-in- place manhole form setter; Pressure pipelayer; Davis trencher - 300 or similar type (and all small
trenchers); Blaster; Diamond driller; Multiple unit
drill;
Hydraulic drill
GROUP 1: Asphalt spreader boxes (all types); Barko,
Wacker
and similar type tampers; Buggymobile; Caulker, bander, Attachment 2
pipewrapper, conduit layer, plastic pipelayer; Certified hazardous waste worker including Leade Abatement;
Compactors of all types; Concrete and magnesite mixer,
1/2
yd. and under; Concrete pan work; Concrete sander;
Concrete
saw; Cribber and/or shoring; Cut granite curb setter;
Dri-pak-it machine; Faller, logloader and bucker; Form
raiser, slip forms; Green cutter; Headerboard, Hubsetter, aligner, by any method; High pressure blow pipe (1-1/2"" or
over, 100 lbs. pressure/over); Hydro seeder and similar type; Jackhammer operator; Jacking of pipe over 12
inches;
Jackson and similar type compactor; Kettle tender, pot
and
worker applying asphalt, lay-kold, creosote, lime,
caustic
and similar type materials (applying means applying,
dipping or handling of such materials); Lagging,
sheeting,
whaling, bracing, trenchjacking, lagging hammer;
Magnesite,
epoxyresin, fiberglass, mastic worker (wet or dry); No
joint pipe and stripping of same, including repair of
voids; Pavement breaker and spader, including tool
grinder;
Perma curb; Pipelayer (including grade checking in
connection with pipelaying); Precast-manhole setter;
Pressure pipe tester; Post hole digger, air, gas and
electric; Power broom sweeper; Power tampers of all types (except as shown in Group 2); Ram set gun and stud gun; Riprap stonepaver and rock-slinger, including placing of sacked concrete and/or sand (wet or dry) and gabions and similar type; Rotary scarifier or multiple head concrete chipping scarifier; Roto and Ditch Witch; Rototiller;
Sandblaster, pot, gun, nozzle operators; Signalling and rigging; Tank cleaner; Tree climber; Turbo blaster;
Vibrascreed, bull float in connection with laborers'
work;
Vibrator; Hazardous waste worker (lead removal); Asbestos and mold removal worker
Attachment 2
GROUP 1-a: Joy drill model TWM-2A; Gardner-Denver model DH143
and similar type drills; Track driller; Jack leg driller; Wagon driller; Mechanical drillers, all types regardless of
type or method of power; Mechanical pipe layers, all
types
regardless of type or method of power; Blaster and
powder;
All work of loading, placing and blasting of all powder and
explosives of whatever type regardless of method used for such loading and placing; High scalers (including
drilling
of same); Tree topper; Bit grinder
GROUP 1-b: Sewer cleaners shall receive $4.00 per day
above
Group 1 wage rates. ""Sewer cleaner"" means any worker who
handles or comes in contact with raw sewage in small
diameter sewers. Those who work inside recently active, large diameter sewers, and all recently active sewer
manholes shal receive $5.00 per day above Group 1 wage
rates.
GROUP 1-c: Burning and welding in connection with
laborers'
work; Synthetic thermoplastics and similar type welding
GROUP 1-d: Maintenance and repair track and road beds.
All
employees performing work covered herein shall receive $ .25 per hour above their regular rate for all work
performed on underground structures not specifically
covered herein. This paragraph shall not be construed to apply to work below ground level in open cut. It shall apply to cut and cover work of subway construction after the temporary cover has been placed.
GROUP 1-e: Work on and/or in bell hole footings and
shafts
thereof, and work on and in deep footings. (A deep
footing
Attachment 2
is a hole 15 feet or more in depth.) In the event the
depth of the footing is unknown at the commencement of
excavation, and the final depth exceeds 15 feet, the deep footing wage rate would apply to all employees for each and
every day worked on or in the excavation of the footing from the date of inception.
GROUP 1-f: Wire winding machine in connection with
guniting
or shot crete
GROUP 2: Asphalt shoveler; Cement dumper and handling dry cement or gypsum; Choke-setter and rigger (clearing
work);
Concrete bucket dumper and chute; Concrete chipping and grinding; Concrete laborer (wet or dry); Driller tender, chuck tender, nipper; Guinea chaser (stake), grout crew; High pressure nozzle, adductor; Hydraulic monitor (over 100
lbs. pressure); Loading and unloading, carrying and
hauling
of all rods and materials for use in reinforcing concrete construction; Pittsburgh chipper and similar type brush shredders; Sloper; Single foot, hand-held, pneumatic
tamper; All pneumatic, air, gas and electric tools not
listed in Groups 1 through 1-f; Jacking of pipe - under 12 inches
GROUP 3: Construction laborers, including bridge and
general
laborer; Dump, load spotter; Flag person; Fire watcher; Fence erector; Guardrail erector; Gardener, horticultural and landscape laborer; Jetting; Limber, brush loader and piler; Pavement marker (button setter); Maintenance,
repair
track and road beds; Streetcar and railroad construction track laborer; Temporary air and water lines, Victaulic or
similar; Tool room attendant (jobsite only)
GROUP 4: Final clean-up work of debris, grounds and
building
Attachment 2
including but not limited to: street cleaner; cleaning
and
washing windows; brick cleaner (jobsite only); material cleaner (jobsite only). The classification ""material
cleaner"" is to be utilized under the following
conditions:
A: at demolition site for the salvage of the material.
B: at the conclusion of a job where the material is to be salvaged and stocked to be reused on another job.
C: for the cleaning of salvage material at the jobsite or temporary jobsite yard.
The material cleaner classification should not be used in
the performance of ""form stripping, cleaning and oiling and moving to the next point of erection"".
--------------------------------------------------------
GUNITE LABORER CLASSIFICATIONS
GROUP 1: Structural Nozzleman
GROUP 2: Nozzleman, Gunman, Potman, Groundman
GROUP 3: Reboundman
GROUP 4: Gunite laborer
----------------------------------------------------------
WRECKING WORK LABORER CLASSIFICATIONS
GROUP 1: Skilled wrecker (removing and salvaging of sash, windows and materials)
GROUP 2: Semi-skilled wrecker (salvaging of other
building
materials)
----------------------------------------------------------- -----
LABO1130-008 07/01/2021
Attachment 2
CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA, MERCED, SAN
JOAQUIN, STANISLAUS & TUOLUMNE
Rates Fringes
Plasterer tender.................$ 35.82 28.45
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
LABO1130-009 07/01/2021
MARIPOSA, MERCED, STANISLAUS, AND TUOLUMNE COUNTIES
Rates Fringes
LABORER (Plaster Tender).........$ 35.82 28.45
Work on a swing stage scaffold: $1.00 per hour additional. ----------------------------------------------------------- -----
PAIN0016-001 01/01/2021
ALAMEDA, CONTRA COSTA, MONTEREY, SAN BENITO, SAN MATEO, SANTA
CLARA, AND SANTA CRUZ COUNTIES
Rates Fringes
Painters:........................$ 45.22 25.48
PREMIUMS:
EXOTIC MATERIALS - $1.25 additional per hour.
SPRAY WORK: - $0.50 additional per hour.
INDUSTRIAL PAINTING - $0.25 additional per hour
[Work on industrial buildings used for the manufacture
and
processing of goods for sale or service; steel
construction
(bridges), stacks, towers, tanks, and similar structures]
Attachment 2
HIGH WORK:
over 50 feet - $2.00 per hour additional
100 to 180 feet - $4.00 per hour additional
Over 180 feet - $6.00 per houir additional
----------------------------------------------------------- -----
PAIN0016-003 07/01/2021
AREA 1: ALAMEDA, CONTRA COSTA, SAN FRANCISCO, SAN MATEO & SANTA
CLARA COUNTIES
AREA 2: CALAVERAS, MARIPOA, MERCED, MONTEREY, SAN BENITO, SAN
JOAQUIN, SANTA CRUZ, STANISLAUS & TUOLUMNE COUNTIES
Rates Fringes
Drywall Finisher/Taper
AREA 1......................$ 54.91 29.49
AREA 2......................$ 50.78 28.09
----------------------------------------------------------- -----
PAIN0016-012 01/01/2019
ALAMEDA, CONTRA COSTA, MARIPOSA, MERCED, MONTEREY, SAN
BENITO,
SAN FRANCISCO, SAN MATEO, SANTA CLARA AND SANTA CRUZ
COUNTIES
Rates Fringes
SOFT FLOOR LAYER.................$ 48.60 27.43 ----------------------------------------------------------- -----
PAIN0016-015 01/01/2021
CALAVERAS, MARIPOSA, MERCED, SAN JOAQUIN, STANISLAUS &
TUOLUMNE
COUNTIES
Attachment 2
Rates Fringes
PAINTER
Brush.......................$ 35.88 21.16
FOOTNOTES:
SPRAY/SANDBLAST: $0.50 additional per hour.
EXOTIC MATERIALS: $1.25 additional per hour.
HIGH TIME: Over 50 ft above ground or water level $2.00 additional per hour. 100 to 180 ft above ground or water level $4.00 additional per hour. Over 180 ft above
ground
or water level $6.00 additional per hour.
----------------------------------------------------------- -----
PAIN0016-022 01/01/2021
SAN FRANCISCO COUNTY
Rates Fringes
PAINTER..........................$ 48.84 25.48 ----------------------------------------------------------- -----
PAIN0169-001 06/01/2020
FRESNO, KINGS, MADERA, MARIPOSA AND MERCED COUNTIES:
Rates Fringes
GLAZIER..........................$ 40.00 26.76 ----------------------------------------------------------- -----
* PAIN0169-005 01/01/2022
ALAMEDA CONTRA COSTA, MONTEREY, SAN BENITO, SAN FRANCISCO, SAN
MATEO, SANTA CLARA & SANTA CRUZ COUNTIES
Rates Fringes
Attachment 2
GLAZIER..........................$ 54.77 31.45 ----------------------------------------------------------- -----
PAIN0294-004 01/01/2021
FRESNO, KINGS AND MADERA COUNTIES
Rates Fringes
PAINTER
Brush, Roller...............$ 31.36 20.33
Drywall Finisher/Taper......$ 40.10 25.00
FOOTNOTE:
Spray Painters & Paperhangers recive $1.00 additional per hour. Painters doing Drywall Patching receive $1.25
additional per hour. Lead Abaters & Sandblasters receive $1.50 additional per hour. High Time - over 30 feet
(does
not include work from a lift) $0.75 per hour additional.
----------------------------------------------------------- -----
PAIN0294-005 01/01/2021
FRESNO, KINGS & MADERA
Rates Fringes
SOFT FLOOR LAYER.................$ 34.55 21.67 ----------------------------------------------------------- -----
* PAIN0767-001 01/01/2022
CALAVERAS, SAN JOAQUIN, STANISLAUS AND TUOLUMNE COUNTIES:
Rates Fringes
GLAZIER..........................$ 41.78 33.09
PAID HOLIDAYS: New Year's Day, Martin Luther King, Jr.
Day,
President's Day, Memorial Day, Independence Day, Labor
Day,
Attachment 2
Veteran's Day, Thanksgiving Day, and Christmas Day.
Employee rquired to wear a body harness shall receive
$1.50
per hour above the basic hourly rate at any elevation.
----------------------------------------------------------- -----
PAIN1176-001 07/01/2021
HIGHWAY IMPR0VEMENT
Rates Fringes
Parking Lot Striping/Highway
Marking:
GROUP 1.....................$ 39.48 16.98
GROUP 2.....................$ 33.56 16.98
GROUP 3.....................$ 33.95 16.98
CLASSIFICATIONS
GROUP 1: Striper: Layout and application of painted
traffic
stripes and marking; hot thermo plastic; tape, traffic
stripes and markings
GROUP 2: Gamecourt & Playground Installer
GROUP 3: Protective Coating, Pavement Sealing
----------------------------------------------------------- -----
PAIN1237-003 01/01/2021
CALAVERAS; SAN JOAQUIN COUNTIES; STANISLAUS AND TUOLUMNE COUNTIES:
Rates Fringes
SOFT FLOOR LAYER.................$ 41.81 23.39 ----------------------------------------------------------- -----
Attachment 2
PLAS0066-002 07/01/2019
ALAMEDA, CONTRA COSTA, SAN MATEO AND SAN FRANCISCO
COUNTIES:
Rates Fringes
PLASTERER........................$ 42.41 30.73 ----------------------------------------------------------- -----
PLAS0300-001 07/01/2018
Rates Fringes
PLASTERER
AREA 188: Fresno...........$ 32.70 31.68
AREA 224: San Benito,
Santa Clara, Santa Cruz.....$ 32.88 31.68
AREA 295: Calaveras & San
Joaquin Couonties...........$ 32.70 31.68
AREA 337: Monterey County..$ 32.88 31.68
AREA 429: Mariposa,
Merced, Stanislaus,
Tuolumne Counties...........$ 32.70 31.68
----------------------------------------------------------- -----
PLAS0300-005 07/01/2016
Rates Fringes
CEMENT MASON/CONCRETE FINISHER...$ 32.15 23.27 ----------------------------------------------------------- -----
PLUM0038-001 07/01/2021
SAN FRANCISCO COUNTY
Rates Fringes
PLUMBER (Plumber,
Steamfitter, Refrigeration
Fitter)..........................$ 79.00 46.01 ----------------------------------------------------------- -----
Attachment 2
PLUM0038-005 07/01/2021
SAN FRANCISCO COUNTY
Rates Fringes
Landscape/Irrigation Fitter
(Underground/Utility Fitter).....$ 67.15 32.67 ----------------------------------------------------------- -----
PLUM0062-001 01/01/2022
MONTEREY AND SANTA CRUZ COUNTIES
Rates Fringes
PLUMBER & STEAMFITTER............$ 47.85 38.10 ----------------------------------------------------------- -----
PLUM0159-001 07/01/2019
CONTRA COSTA COUNTY
Rates Fringes
Plumber and steamfitter
(1) Refrigeration...........$ 56.93 41.04
(2) All other work..........$ 57.82 41.04
----------------------------------------------------------- -----
PLUM0246-001 01/01/2022
FRESNO, KINGS & MADERA COUNTIES
Rates Fringes
PLUMBER & STEAMFITTER............$ 45.15 37.19 ----------------------------------------------------------- -----
* PLUM0246-004 01/01/2017
FRESNO, MERCED & SAN JOAQUIN COUNIES
Rates Fringes
Attachment 2
PLUMBER (PIPE TRADESMAN).........$ 13.00 ** 10.74
PIPE TRADESMAN SCOPE OF WORK:
Installation of corrugated metal piping for drainage, as well
as installation of corrugated metal piping for culverts in
connection with storm sewers and drains; Grouting, dry
packing and diapering of joints, holes or chases
including
paving over joints, in piping; Temporary piping for dirt work for building site preparation; Operating jack
hammers,
pavement breakers, chipping guns, concrete saws and
spades
to cut holes, chases and channels for piping systems;
Digging, grading, backfilling and ground preparation for all types of pipe to all points of the jobsite; Ground
preparation including ground leveling, layout and
planting
of shrubbery, trees and ground cover, including watering, mowing, edging, pruning and fertilizing, the breaking of concrete, digging, backfilling and tamping for the
preparation and completion of all work in connection with lawn sprinkler and landscaping; Loading, unloading and
distributing materials at jobsite; Putting away materials in storage bins in jobsite secure storage area;
Demolition
of piping and fixtures for remodeling and additions;
Setting up and tearing down work benches, ladders and job shacks; Clean-up and sweeping of jobsite; Pipe wrapping and
waterproofing where tar or similar material is applied
for
protection of buried piping; Flagman
----------------------------------------------------------- -----
PLUM0342-001 07/01/2021
ALAMEDA & CONTRA COSTA COUNTIES
Rates Fringes
Attachment 2
PIPEFITTER
CONTRA COSTA COUNTY.........$ 69.95 44.00
PLUMBER, PIPEFITTER,
STEAMFITTER
ALAMEDA COUNTY..............$ 69.95 44.00
----------------------------------------------------------- -----
PLUM0355-004 07/01/2021
ALAMEDA, CALAVERAS, CONTRA COSTA, FRESNO, KINGS, MADERA,
MARIPOSA, MERCED, MONTEREY, SAN BENITO, SAN JOAQUIN, SAN MATEO,
SANTA CLARA, SANTA CRUZ, STANISLAUS, AND TUOLUMNE COUNTIES:
Rates Fringes
Underground Utility Worker
/Landscape Fitter...........$ 30.90 16.80
----------------------------------------------------------- -----
PLUM0393-001 07/01/2021
SAN BENITO AND SANTA CLARA COUNTIES
Rates Fringes
PLUMBER/PIPEFITTER...............$ 68.76 46.63 ----------------------------------------------------------- -----
PLUM0442-001 01/01/2022
CALAVERAS, MARIPOSA, MERCED, SAN JOAQUIN, STANISLAUS &
TUOLUMNE
COUNTIES
Rates Fringes
PLUMBER & STEAMFITTER............$ 48.75 33.94 ----------------------------------------------------------- -----
PLUM0467-001 07/01/2021
Attachment 2
SAN MATEO COUNTY
Rates Fringes
Plumber/Pipefitter/Steamfitter...$ 73.10 38.61 ----------------------------------------------------------- -----
ROOF0027-002 01/01/2022
FRESNO, KINGS, AND MADERA COUNTIES
Rates Fringes
ROOFER...........................$ 38.81 14.81
FOOTNOTE: Work with pitch, pitch base of pitch
impregnated
products or any material containing coal tar pitch, on
any
building old or new, where both asphalt and pitchers are used in the application of a built-up roof or tear off:
$2.00 per hour additional.
----------------------------------------------------------- -----
ROOF0040-002 08/01/2021
SAN FRANCISCO & SAN MATEO COUNTIES:
Rates Fringes
ROOFER...........................$ 46.38 20.94 ----------------------------------------------------------- -----
ROOF0081-001 08/01/2021
ALAMEDA AND CONTRA COSTA COUNTIES:
Rates Fringes
Roofer...........................$ 47.17 19.86 ----------------------------------------------------------- -----
Attachment 2
ROOF0081-004 08/01/2020
CALAVERAS, MARIPOSA, MERCED, SAN JOAQUIN, STANISLAUS AND TUOLUMNE COUNTIES:
Rates Fringes
ROOFER...........................$ 39.73 19.11 ----------------------------------------------------------- -----
ROOF0095-002 08/01/2020
MONTEREY, SAN BENITO, SANTA CLARA, AND SANTA CRUZ COUNTIES:
Rates Fringes
ROOFER
Journeyman..................$ 46.54 20.69
Kettle person (2 kettles);
Bitumastic, Enameler, Coal
Tar, Pitch and Mastic
worker......................$ 48.54 20.69
----------------------------------------------------------- -----
SFCA0483-001 01/01/2022
ALAMEDA, CONTRA COSTA, SAN FRANCISCO, SAN MATEO AND SANTA CLARA
COUNTIES:
Rates Fringes
SPRINKLER FITTER (FIRE)..........$ 70.55 35.39 ----------------------------------------------------------- -----
* SFCA0669-011 04/01/2022
CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA, MERCED,
MONTEREY,
SAN BENITO, SAN JOAQUIN, SANTA CRUZ, STANISLAUS AND
TUOLUMNE
COUNTIES:
Attachment 2
Rates Fringes
SPRINKLER FITTER.................$ 42.30 26.69 ----------------------------------------------------------- -----
SHEE0104-001 07/01/2020
AREA 1: ALAMEDA, CONTRA COSTA, SAN FRANCISCO, SAN MATEO, SANTA
CLARA
AREA 2: MONTEREY & SAN BENITO
AREA 3: SANTA CRUZ
Rates Fringes
SHEET METAL WORKER
AREA 1:
Mechanical Contracts
under $200,000.............$ 55.92 45.29
All Other Work.............$ 64.06 46.83
AREA 2......................$ 52.90 36.44
AREA 3......................$ 55.16 34.18
----------------------------------------------------------- -----
SHEE0104-003 07/01/2021
CALAVERAS AND SAN JOAQUIN COUNTIES:
Rates Fringes
SHEET METAL WORKER...............$ 44.34 39.22 ----------------------------------------------------------- -----
SHEE0104-005 07/01/2021
MARIPOSA, MERCED, STANISLAUS AND TUOLUMNE COUNTIES:
Rates Fringes
Attachment 2
SHEET METAL WORKER (Excluding
metal deck and siding)...........$ 41.28 45.41 ----------------------------------------------------------- -----
SHEE0104-007 07/01/2021
FRESNO, KINGS, AND MADERA COUNTIES:
Rates Fringes
SHEET METAL WORKER...............$ 44.07 40.79 ----------------------------------------------------------- -----
SHEE0104-015 07/01/2020
ALAMEDA, CONTRA COSTA, MONTEREY, SAN BENITO, SAN FRANCISCO, SAN
MATEO, SANTA CLARA AND SANTA CRUZ COUNTIES:
Rates Fringes
SHEET METAL WORKER (Metal
Decking and Siding only).........$ 44.45 35.55 ----------------------------------------------------------- -----
SHEE0104-018 07/01/2020
CALAVERAS, FRESNO, KINGS, MADERA, MARIPOSA, MERCED, SAN JOAQUIN, STANISLAUS AND TUOLUMNE COUNTIES:
Rates Fringes
Sheet metal worker (Metal
decking and siding only).........$ 44.45 35.55 ----------------------------------------------------------- -----
TEAM0094-001 07/01/2021
Rates Fringes
Truck drivers:
GROUP 1.....................$ 35.15 31.42
Attachment 2
GROUP 2.....................$ 35.45 31.42
GROUP 3.....................$ 35.75 31.42
GROUP 4.....................$ 36.10 31.42
GROUP 5.....................$ 36.45 31.42
FOOTNOTES:
Articulated dump truck; Bulk cement spreader (with or
without
auger); Dumpcrete truck; Skid truck (debris box); Dry
pre-batch concrete mix trucks; Dumpster or similar type; Slurry truck: Use dump truck yardage rate.
Heater planer; Asphalt burner; Scarifier burner;
Industrial
lift truck (mechanical tailgate); Utility and clean-up
truck: Use appropriate rate for the power unit or the
equipment utilized.
TRUCK DRIVER CLASSIFICATIONS
GROUP 1: Dump trucks, under 6 yds.; Single unit flat rack (2-
axle unit); Nipper truck (when flat rack truck is used
appropriate flat rack shall apply); Concrete pump truck (when flat rack truck is used appropriate flat rack shall apply); Concrete pump machine; Fork lift and lift
jitneys;
Fuel and/or grease truck driver or fuel person; Snow
buggy;
Steam cleaning; Bus or personhaul driver; Escort or pilot car driver; Pickup truck; Teamster oiler/greaser and/or serviceperson; Hook tender (including loading and
unloading); Team driver; Tool room attendant (refineries)
GROUP 2: Dump trucks, 6 yds. and under 8 yds.; Transit
mixers, through 10 yds.; Water trucks, under 7,000 gals.; Jetting trucks, under 7,000 gals.; Single-unit flat rack (3-axle unit); Highbed heavy duty transport; Scissor
truck;
Rubber-tired muck car (not self-loaded); Rubber-tired
truck
jumbo; Winch truck and ""A"" frame drivers; Combination winch
truck with hoist; Road oil truck or bootperson;
Attachment 2
Buggymobile; Ross, Hyster and similar straddle carriers; Small rubber-tired tractor
GROUP 3: Dump trucks, 8 yds. and including 24 yds.;
Transit
mixers, over 10 yds.; Water trucks, 7,000 gals. and over; Jetting trucks, 7,000 gals. and over; Vacuum trucks under 7500 gals. Trucks towing tilt bed or flat bed pull
trailers; Lowbed heavy duty transport; Heavy duty
transport
tiller person; Self- propelled street sweeper with
self-contained refuse bin; Boom truck - hydro-lift or
Swedish type extension or retracting crane; P.B. or
similar
type self-loading truck; Tire repairperson; Combination bootperson and road oiler; Dry distribution truck (A
bootperson when employed on such equipment, shall receive the rate specified for the classification of road oil
trucks or bootperson); Ammonia nitrate distributor,
driver
and mixer; Snow Go and/or plow
GROUP 4: Dump trucks, over 25 yds. and under 65 yds.;
Water
pulls - DW 10's, 20's, 21's and other similar equipment when pulling Aqua/pak or water tank trailers; Helicopter pilots (when transporting men and materials); Lowbedk
Heavy
Duty Transport up to including 7 axles; DW10's, 20's,
21's
and other similar Cat type, Terra Cobra, LeTourneau
Pulls,
Tournorocker, Euclid and similar type equipment when
pulling fuel and/or grease tank trailers or other
miscellaneous trailers; Vacuum Trucks 7500 gals and over and truck repairman
GROUP 5: Dump trucks, 65 yds. and over; Holland hauler; Low
bed Heavy Duty Transport over 7 axles
----------------------------------------------------------- -----
Attachment 2
WELDERS - Receive rate prescribed for craft performing
operation to which welding is incidental.
=========================================================== =====
** Workers in this classification may be entitled to a
higher
minimum wage under Executive Order 14026 ($15.00) or 13658 ($11.25). Please see the Note at the top of the wage
determination for more information.
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave
for Federal Contractors applies to all contracts subject to the
Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this
contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for
their
own illness, injury or other health-related needs,
including
preventive care; to assist a family member (or person who is
like family to the employee) who is ill, injured, or has other
health-related needs, including preventive care; or for reasons
resulting from, or to assist a family member (or person who is
like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional
information
on contractor requirements and worker protections under the EO
is available at
https://www.dol.gov/agencies/whd/government-contracts.
Unlisted classifications needed for work not included
within
Attachment 2
the scope of the classifications listed may be added after award only as provided in the labor standards contract
clauses
(29CFR 5.5 (a) (1) (ii)).
----------------------------------------------------------- -----
The body of each wage determination lists the
classification
and wage rates that have been found to be prevailing for the
cited type(s) of construction in the area covered by the wage
determination. The classifications are listed in
alphabetical
order of ""identifiers"" that indicate whether the
particular
rate is a union rate (current union negotiated rate for local),
a survey rate (weighted average rate) or a union average rate
(weighted union average rate).
Union Rate Identifiers
A four letter classification abbreviation identifier
enclosed
in dotted lines beginning with characters other than ""SU"" or
""UAVG"" denotes that the union classification and rate were
prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of
the union which prevailed in the survey for this
classification, which in this example would be Plumbers. 0198
indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next
number,
Attachment 2
005 in the example, is an internal number used in
processing
the wage determination. 07/01/2014 is the effective date of the
most current negotiated rate, which in this example is July 1,
2014.
Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA)
governing
this classification and rate.
Survey Rate Identifiers
Classifications listed under the ""SU"" identifier indicate that
no one rate prevailed for this classification in the survey and
the published rate is derived by computing a weighted
average
rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU
indicates
the rates are survey rates based on a weighted average
calculation of rates and are not majority rates. LA
indicates
the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007
in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey
completion
date for the classifications and rates under that
identifier.
Survey wage rates are not updated and remain in effect
until a
new survey is conducted.
Union Average Rate Identifiers
Attachment 2
Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those
classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010
08/29/2014. UAVG indicates that the rate is a weighted
union
average rate. OH indicates the state. The next number, 0010 in
the example, is an internal number used in producing the wage
determination. 08/29/2014 indicates the survey completion date
for the classifications and rates under that identifier.
A UAVG rate will be updated once a year, usually in January of
each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is
based.
----------------------------------------------------------- -----
WAGE DETERMINATION APPEALS PROCESS
1.) Has there been an initial decision in the matter? This can
be:
* an existing published wage determination
* a survey underlying a wage determination
* a Wage and Hour Division letter setting forth a position on
a wage determination matter
* a conformance (additional classification and rate)
ruling
On survey related matters, initial contact, including
requests
for summaries of surveys, should be with the Wage and Hour Attachment 2
National Office because National Office has responsibility for
the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process
described
in 2.) and 3.) should be followed.
With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:
Branch of Construction Wage Determinations
Wage and Hour Division
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour
Administrator
(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:
Wage and Hour Administrator
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the
interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.
3.) If the decision of the Administrator is not favorable, an
interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board
U.S. Department of Labor
200 Constitution Avenue, N.W.
Washington, DC 20210
Attachment 2
4.) All decisions by the Administrative Review Board are final.
Attachment 2
The Bidder shall list the name and address of each subcontractor to whom the Bidder proposes to subcontract portions of the work, as required by the provisions in Section 2-1.054, "Required Listing of Proposed Subcontractors," of the State Standard Specifications and Section 12, "Subcontractors," of the information for bidders.
LIST OF SUBCONTRACTORS
Description of Portion
Name and Address of Work Subcontracted
(THE BIDDER'S EXECUTION ON THE SIGNATURE PORTION OF THIS
PROPOSAL SHALL ALSO CONSTITUTE AN ENDORSEMENT AND EXECUTION
OF THOSE CERTIFICATIONS WHICH ARE A PART OF THIS PROPOSAL)
Attachment 2
INVITATION FOR BIDS # PW22-13
Java Drive Road Diet and Bike Lanes, TR-21-03, CML-5213 (064) Rev. 08/18
BID - Page 4 of 31
SUBCONTRACTOR LIST
(Public Contract Code 4100 et seq.)
Name of
Subcontractor
Address of Subcontractor
and License Number
(PWC Registration Numbers shall be
included in Part E under the
)
Work to Be
Performed
Value of Work to
Be Performed by
Subcontractor ($)
1. (License No.)
2. (License No.)
3. (License No.)
4. (License No.)
5. (License No.)
6. (License No.)
7. (License No.)
8. (License No.)
9. (License No.)
10. (License No.)
Chrisp Company Lic#374600
DIR#1000000306 Striping $131,891.00
Columbia Electric, Inc. Lic#765902
DIR#1000001478 Electric $194,000.00
Attachment 2
Attachment 2
Attachment 2
Attachment 2
Attachment 2
Attachment 2
Attachment 2
Attachment 2
Attachment 2
INSTRUCTIONS FOR COMPLETION OF SF-LLL,
DISCLOSURE OF LOBBYING ACTIVITIES
This disclosure form shall be completed by the reporting entity, whether subawardee or prime Federal recipient, at the initiation or receipt of covered Federal action or a material change to previous filing pursuant to title 31 U.S.C. section 1352. The filing of a form is required for such payment or agreement to make payment to lobbyi ng entity for influencing or attempting to influence an officer or employee of any agency, a Member of Congress an officer or employee of Congress or an employee of a Member of Congress in connection with a covered Federal action.
Attach a continuation sheet for additional information if the space on the form is inadequate. Complete all items that apply for both the initial filing and material change report. Refer to the implementing guidance published by the Office of Management and Budget for additional information.
1. Identify the type of covered Federal action for which lobbying activity is and/or has been secured to influence, the outcome of a covered Federal action.
2. Identify the status of the covered Federal action.
3. Identify the appropriate classification of this report. If this is a follow-up report caused by a material change to the information previously reported, enter the year and quarter in which the change occurred.
Enter the date of the last, previously submitted report by this reporting entity for this covered Federal action.
4. Enter the full name, address, city, state and zip code of the reporting entity. Include Congressional District if known. Check the appropriate classification of the reporting entity that designates if it is or expects to be a prime or subaward recipient. Identify the tier of the subawardee, e.g., the first subawardee of the prime is the first tier. Subawards include but are not limited to subcontracts, subgrants and contract awards under grants.
5. If the organization filing the report in Item 4 checks "Subawardee" then enter the full name, address, city, state and zip code of the prime Federal recipient. Include Congressional District, if known.
6. Enter the name of the Federal agency making the award or loan commitment. Include at least one organization level below agency name, if known. For example, Department of Transportation, United States Coast Guard.
7. Enter the Federal program name or description for the covered Federal action (item 1). If known, enter the full Catalog of Federal Domestic Assistance (CFDA) number for grants, cooperative agreements, loans and loan commitments.
8. Enter the most appropriate Federal identifying number available for the Federal action identification in item 1 (e.g., Request for Proposal (RFP) number, Invitation for Bid (IFB) number, grant announcement number, the contract grant. or loan award number, the application/proposal control number assigned by the Federal agency). Include prefixes, e.g., "RFP-DE-90-001."
9. For a covered Federal action where there has been an award or loan commitment by the Federal agency, enter the Federal amount of the award/loan commitments for the prime entity identified in item 4 or 5.
10. (a) Enter the full name, address, city, state and zip code of the lobbying entity engaged by the reporting entity identified in item 4 to influence the covered Federal action. (b) Enter the full names of the individual(s) performing services and include full address if different from 10 (a). Enter Last Name, First Name and Middle Initial (Ml).
11. Enter the amount of compensation paid or reasonably expected to be paid by the reporting entity (item 4) to the lobbying entity (item 10). Indicate whether the payment has been made (actual) or will be m ade (planned). Check all boxes that apply. If this is a material change report, enter the cumulative amount of payment made or planned to be made.
12. Check the appropriate box(es). Check all boxes that apply. If payment is made through an in -kind contribution, specify the nature and value of the in-kind payment.
13. Check the appropriate box(es). Check all boxes that apply. If other, specify nature.
14. Provide a specific and detailed description of the services that the lobbyist has performed or wil l be expected to perform, and the date(s) of any services rendered. Include all preparatory and related activity not just time spent in actual contact with Federal officials. Identify the Federal officer(s) or employee(s) contacted or the officer(s) employee(s) or Member(s) of Congress that were contacted.
15. Check whether or not a continuation sheet(s) is attached.
16. The certifying official shall sign and date the form, print his/her name title and telephone number.
Public reporting burden for this collection of information is estimated to average 30 minutes per response, including time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding the burden Attachment 2