Architectural and Site Plans for 1154 Sonora Ct (File no.2022-7270) — Sunnyvale City Council, November 28, 2023 (part 2 of 2)

5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
41 5. 489. 2 22 4 TEL
41 5. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
41 5. 489. 2 22 4 TEL
41 5. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
SHEET NO:

SHEET TITLE:

DATEISSUES
PROJECT NO.:

DATE:

SCALE:

All drawings and written material appearing herein constitute original and unpublished work of the Architect/Engineer and may not be duplicated, used or disclosed without consent of Architect/Engineer.

If this drawing is not 24"x36", then the drawing has been revised from its original size.

Noted scales must be adjusted. This line should be equal to one inch

KEYPLAN
09/02/2021INFORMAL PLANNING APPLICATION
A B
REVISION LIST# DATE
1154 1170
04/22/2022FORMAL PLANNING APPLICATION
09/30/2022FORMAL PLANNING APPLICATION #2
01/10/2023FORMAL PLANNING APPLICATION #3
04/28/2023FORMAL PLANNING APPLICATION #4
9/20/2022 2:58:01 PM
21028.00
LT.A.105.2
APRIL 28, 2023

SONORA COURT
1170 Sonora Court, Sunnyvale, CA 94086

SITE LIGHTING

FIXTURE CUTSHEETS
N/A
PROJECT: SONORA COURT REVISED: SEPTEMBER 30, 2022
WAT T
lighting design
tel 206.317.4699 / [email protected]
TYPE:

SLE01
Application
Recessed wall luminaire with asymmetric forward throw light distribution.

The specially designed optics in this luminaire allow for superior illumination of ground surfaces at an extremely low mounting height. Separate installation housing allows for seamless coordination into construction and easy maintenance.

Materials
Luminaire housing constructed of die-cast aluminum marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy Clear safety glass with optical texture
Reflector made of pure anodized aluminum
Silicone applied robotically to casting, plasma treated for increased adhesion
High temperature silicone gasket
Mechanically captive stainless steel fasteners
Stainless steel helicoils
Stainless steel screw clamps
Composite installation housing
NRTL listed to North American Standards, suitable for wet locations Protection class IP65
Weight: 1.2 lbs
Electrical
Operating voltage 120-277V AC
Minimum start temperature -40° C
LED module wattage 5.1 W
System wattage 6.8 W
Controlability 0-10V dimmable
Color rendering index Ra > 80
Luminaire lumens 305 lumens (4000K)
LED service life (L70) 60,000 hours
LED color temperature
2700K - Product number + K27
3000K - Product number + K3 (

EXPRESS)
3500K - Product number + K35
4000K - Product number + K4 ( EXPRESS)
BEGA can supply you with suitable LED replacement modules for up to 20 years after the purchase of LED luminaires - see website for details Finish
All BEGA standard finishes are matte, textured polyester powder coat with minimum 3 mil thickness.

Available colors Black (BLK) White (WHT) RAL:

Bronze (BRZ) Silver (SLV) CUS:

Recessed wall luminaire - extended throw
BEGA 1000 BEGA Way, Carpinteria, CA 93013 (805) 684-0533 [email protected] Due to the dynamic nature of lighting products and the associated technologies, luminaire data on this sheet is subject to change at the discretion of BEGA North America. For the most current technical data, please refer to bega-us .com © copyright BEGA 2019 Updated 09/25/19
Type:

BEGA Product:

Project:

Modified:

Available options
FSC Fusing
FFRO Factory fixed reduced output
See individual accessory spec sheet for details.

Recessed wall luminaire · extended throw

LED A B C
24 063 5.1 W 6 5⁄8 2 3⁄4 5
B
CA
B
C
Fully enclosed luminaire with
installation housing ensures
seamless integration and
weathertight operation.

PROJECT: SONORA COURT REVISED: APRIL 20, 2022
WAT T
lighting design
tel 206.317.4699 / [email protected]
TYPE:

Certification
UL Listed for Wet Location, CE, Buy America Compliant, RoHS Compliant Designed by Justin Champaign
Click here for patent information related to this product.

Distribution
Lambertian
Motive is a sophisticated family of lights that blurs the line between indoor and outdoor lighting to create out-of-the-ordinary settings.

Designed by Justin Champaign, Motive celebrates the beauty of illumination and its interaction with architecture, objects, and space. The luminaires’ neutral sculptural form address an array of applications for buildings and grounds, pathways, social spaces, and high-profile areas such as art installations and entrances.
10 1/2"
265 mm
Weight: 7 lbs
TM21 L70(10k): 60,000 hrs
Protection Class: IP66
4"
102 mm
Housing & Materials
A UV stable, impact modified diffused acrylic lens seals to the cast aluminum round luminaire housing. Luminaire mounts to standard junction box (by others) with included wall mount plate and gasket. The luminaire’s cast lid is secured with three socket head set screws. All hardware is magni-coated.

Electrical
Internally mounted surge protected 120V through 277V 50/60Hz electronic driver. -40°C start temperature., leading edge and trailing edge phase-cut dimmable. Motive path light ships prewired.

Light Engine
Cast aluminum light cartridge features high powered LEDs mounted to a RoHS compliant circuit board delivering indirect lighting. Motive Wall Mount Light can be configured with a short Type V (Lambertian) distribution. The replaceable cartridge provides ease of installation and serviceability. Available in 2700K, 3000K, 3500K, and 4000K. >80 CRI across all available color temperatures.

PROJECT: SONORA COURT REVISED: APRIL 20, 2022
WAT T
lighting design
tel 206.317.4699 / [email protected]
TYPE:

WSE02
UVK-30002
Vekter 1 Medium Surface
Ligman Lighting USA reserves the right to change speci/f_ications without prior notice, please contact factory for latest information. Due to the continual improvements in LED technology data and components may change without notice.

Construction
Mounting Detail

7.7”

3.1”

10.2”

8.7”

3.1”

10.2”
Ø .20”
Additional Options (Consult Factory For Pricing)

TURTLE FRIENDLY
28w LED 3308 Lumens
IP65 • Suitable For Wet Locations
IK08 • Impact Resistant (Vandal Resistant)
Weight 7 lbs

TECHNOLOGY
Flexible wall-mounted floodlighting and area
luminaires. Sleek, angular, technical and
powerful professional lighting solutions.

A wedge shaped range of small profile wall mounted
luminaires, with no visible external hardware for use in uplight or downlight applications. This product is provided with a range of high powered LEDs with a selection of optics.

The Vekter is unique as it is available with Type II, III, IV & V light distribution options that facilitates wider spacing and even light distribution between the light fixtures. Wide spacings of up to 40’ on center can be achieved using a type II optic with uniformity that complies to path of egress requirements. This provides higher energy saving and
reduced installation costs. The Vekter can be manufactured using different type beam optics to achieve custom
distribution, e.g using type II and type IV optics inside the same luminaire.

Integral electronic control gear is housed in a special waterproof box that can be detached from the optical
chamber for easy installation. Mounting plate for 3” and 4” junction box is provided with the fixture. Matching surface mount conduit boxes are available as an option.

The Vekter is suitable for lighting footpaths, building facades, building entrances and parking areas around
buildings.

This luminaire can be mounted in downward or upward
positions.

Type I
Type IV
HYBRID

TYPE I & TYPE IV
Type V
Type II
Ligman’s micro Variable Optical System provides the ability to interchange, mix & rotate optics to provide specific light distributions for optimized spacing and uniformity. Type III The variable optic system allows for the designer to create hybrid distributions for precise lighting requirements.

TECHNOLOGY
Aluminum
Less than 0.1% copper content – Marine Grade 6060 extruded & LM6 Aluminum High Pressure die casting provides excellent mechanical strength , clean detailed product lines and excellent heat dissipation.

Pre paint
8 step degrease and phosphate process that includes
deoxidizing and etching as well as a zinc and nickel phosphate process before product painting.

Memory Retentive -Silicon Gasket
Provided with special injection molded “fit for purpose” long life high temperature memory retentive silicon gaskets. Maintains the gaskets exact profile and seal over years of use and compression.

Thermal management
LM6 Aluminum is used for its excellent mechanical strength and thermal dissipation properties in low and high ambient
temperatures. The superior thermal heat sink design by Ligman used in conjunction with the driver, controls thermals below critical temperature range to ensure maximum luminous flux output, as well as providing long LED service life and ensuring less than 10% lumen depreciation at 50,000 hours.

Surge Suppression
Standard 10kv surge suppressor provided with all fixtures.

BUG Rating
B2 - U0 - G0
Finishing
All Ligman products go through an extensive finishing process that includes fettling to improve paint adherence.

Paint
UV Stabilized 4.9Mil thick powder coat paint and baked at 200 Deg C. This process ensures that Ligman products can ithstand harsh environments. Rated for use in natatoriums.

Inspired by Nature Finishes
The Inspired by nature Finishing is a unique system of
decorative powder coating. Our metal decoration process can easily transform the appearance of metal or aluminum product into a wood grain finish.

This patented technology enables the simulation of wood grain, and even marble or granite finish through the use of decorative powder coating.

The wood grain finish is so realistic that it’s almost
undistinguishable from real wood, even from a close visual inspection. The system of coating permeates the entire
thickness of the coat and as a result, the coating cannot be removed by normal rubbing, chipping, or scratching.

The Coating Process
After pre-treatment the prepared parts are powder coated with a specially formulated polyurethane powder. This powder provides protection against wear, abrasion, impact and
corrosion and acts as the relief base color for the finalized metal decoration.

The component is then wrapped with a sheet of non-porous film with the selected decoration pattern printed on it using special high temperature inks.

This printed film transfer is vacuum-sealed to the surface for a complete thermo print and then transferred into a customized oven. The oven transforms the ink into different forms within the paint layer before it becomes solid. Finally, the film is removed, and a vivid timber look on aluminum remains.

Wood grain coating can create beautiful wood-looking products of any sort. There are over 300 combinations of designs currently in use. Wood grains can be made with different colors, designs, etc.

Our powder coatings are certified for indoor and outdoor applications and are backed by a comprehensive warranty.

These coatings rise to the highest conceivable standard of performance excellence and design innovation.

Added Benefits
• Resistance to salt-acid room, accelerated aging
• Boiling water, lime and condensed water resistant
• Anti-Graffiti, Anti-Slip, Anti-Microbial, Anti-Scratch • Super durable (UV resistant)
• TGIC free (non-toxic)
Hardware
Provided Hardware is Marine grade 316 Stainless steel.

Anti Seize Screw Holes
Tapped holes are infused with a special anti seize compound designed to prevent seizure of threaded connections, due to electrolysis from heat, corrosive atmospheres and moisture.

Crystal Clear Low Iron Glass Lens
Provided with tempered, impact resistant crystal clear low iron glass ensuring no green glass tinge.

Optics & LED
Precise optic design provides exceptional light control and precise distribution of light. LED CRI > 80
Lumen - Maintenance Life
L80 /B10 at 50,000 hours (This means that at least 90% of the LED still achieve 80% of their original flux)
SCDT
Surface Conduit Decorative Trim
BS2
Bird Spikes
[Option 2]
BS1
Bird Spikes
[Option 1]
PROJECT: SONORA COURT REVISED: APRIL 20, 2022
WAT T
lighting design
tel 206.317.4699 / [email protected]
TYPE:

STE01
Kendo M Wet Static White Linear Illumination System
www.luminii.com T: 224-333-6033REV1.8 03292022 1 | 10
Technical Information

0.49"

0.69"
Features
• 24VDC Class 2 and IP68 rated for
wet locations, fixtures made to order
up to 144”.Fixtures can be linked
up to 48’ depending on output
• Suitable for undercabinet,
millwork recessed, and surface
mount applications
• Dot free even illumination with frosted
lens

• High Color Quality options offer
premium quality and vibrant
colors with R9 values up to 97
• High Efficacy options offer best in
class output and efficacy with over
590 lm/ft and over 80 lm/W
• Proprietary strong bond solder method
handles up to 50 lbs of pull force
on wire leads and connectors
• 3 Year warranty
White powder coated
Bronze powder coated
Black powder coated
Silver anodized
Finish Options
Ordering Code
MODEL LENGTH1 OUTPUT CCT LENS2 MOUNTING FINISH3 POSITION

TYPE POWER FEED ACCESSORIES
- - - - - - - - -
KMW - Kendo M Wet
12"–144"
1" increments
LL72SO
72HO
72VHO
-
-
-
Standard
High
Very High
27K
30K
35K
40K
-
-
-
-
2700K
3000K
3500K
4000K
C
F
G
-
-
-
Clear Lens
Frosted
Graze
FC
A
FC45
EFC
-
-
-
-
Fixed Clip
Adjustable
Fixed Clip, 45°
Tamper Resistant
Fixed Clip
SA
BK
BZ
WH
-
-
-
-
Silver
Black
Bronze
White
E
B
S
-
-
-
End
Back
Side
1 1X 2
2 3
4 -
-
-
-
-
72" wire leads
72" wire leads at both ends
72" wire leads at one end and
Female Quick Connect at other
Single Male Quick Connect
Female Quick Connect at one end
and Male Quick Connect at other
___
BLS
BLBK
BLWH
GSS
GSBK
GSWH
-
-
-
-
-
-
-
N/A, leave blank
Blade louver, Silver
Blade louver, Black
Blade louver, White
Glare shield, Silver
Glare shield, Black
Glare shield, White
12”–144”
2” increments
HHE48LO
HE48SO
HE48MO
HE48HO
HE64VHO
-
-
-
-
-
Low
Standard
Medium
High
Very High
27K
30K
35K
40K
-
-
-
-
2700K
3000K
3500K
4000K
TYPE High Color Quality High Efficacy High Efficacy
OUTPUT OPTIONS 72SO 72HO 72VHO HE48LO HE48SO HE48MO HE48HO HE64VHO Lumens Output (3000K)
(with a Clear Lens) 163 lm/ft 266 lm/ft 323 lm/ft 159 lm/ft 220 lm/ft 294 lm/ft 472 lm/ft 597 lm/ft Average Power Consumption
(for a 4’ section) 2.8 W/ft 4.8 W/ft 6.0 W/ft 1.9 W/ft 2.8 W/ft 3.5 W/ft 6.5 W/ft 7.5 W/ft Efficacy 58 lm/W 55 lm/W 54 lm/W 84 lm/W 79 lm/W 84 lm/W 73 lm/W 80 lm/W Max Run Length
(in series) 40 ft 31 ft 22 ft 48 ft 42 ft 33 ft 21 ft 15 ft 1 - Custom lengths and increments are available, please consult Inside Sales with specific request. 2 - All High Efficacy options can be used to comply with Title 24 JA8. High Color Quality options can be used to comply with Title 24 JA8 depending on Output, CCT, and Lens selections, see multiplier charts to calculate specific efficacies. 3 - BK, BZ, and WH finishes may have extended lead times. Custom RALs are available, please consult Inside Sales with specific request.

High Efficacy (HE48/HE64)
CCT Multiplier
(reference - 3000K)
TM-30
CRI R f Rg R9
2700K 0.94 92 90 99 46
3000K 1.00 92 89 99 62
3500K 1.02 92 89 99 58
4000K 1.02 92 86 94 52
High Color Quality (72)
CCT Multiplier
(reference - 3000K)
TM-30
CRI R f Rg R9
2700K 0.97 97 96 99 93
3000K 1.00 96 95 99 92
3500K 1.01 96 95 100 94
4000K 1.34 97 96 102 92
05/12/2023
MAY 12, 2023
A B
1 154 1170
Attachment 10

Page 72 of 80 ends

24'

OFFICE STAIR
190 SF

RESI / OFFICE
STAIR
120V 15A SERVICE
OUTLET, TYP U.O.N.

TAYLOR-DUNN

BIGFOOT XL

STAFF TRASH ROUTE PLAN
LEVEL B1SCALE: 116" = 1'-0"
CORE 1 RESIDENTIAL TRASH ROOM
SEE SHEET TR.A.1.0
CORE 2 RESIDENTIAL TRASH ROOM
SEE SHEET TR.A.1.1
SHEET NOTES:

TRASH ROUTE PLAN. LEVEL B1.

1. STAFF TO TRANSPORT RESIDENTIAL CONTAINERS WITH TAYLOR-DUNN BIGFOOT XL CARRIER.

PE 13 12 11 10 9 7 6 5 4 3 2 PW
A
54,519 SF

PARKING
306 SF

RESIDENTIAL
LOBBY
358 SF
MECH
241 SF
MECH
296 SF
MECH
310 SF
MECH
C
D
E
F
G
H
B
PLSW
18'
18'-0"26'-10"
28'-0"
RAMP DOWN FROM L1
RAMP DOWN TO B2
102 SF

RESI ELEV
79 SF

RESI ELEV
68 SF

OFFICE ELEV
246 SF
PL.N
10'-0"
417'-6"
30'-0" 30'-0" 30'-4" 29'-8" 30'-0" 15'-0" 28'-0"
175'-9"
417'-6"
365'-6"
10'-7"
54,519 SF

PARKING
PL.S.

J
OFFICE
LOBBY
11' 24' 36' 24' 36' 24' 18'

ADA EV VAN
ADA EV
ADA VANADA STND.

EVCS

AMBULATORY
ADA VANADA STND.

ADA STND.

ADA STND. ADA STND.
(13) 200 CU FT

STORAGE
ADA STND.
51 8"

ELECTRIC BIN MOVING TUG STORAGE

TAYLOR-DUNN BIGFOOT XL W/ LOWBOY TRAILER
SHEET NO:

SHEET TITLE:

PROJECT NO.:

DATE:

SCALE:

If this drawing is not 24"x36", then the drawing has been revised from its original size.

Noted scales must be adjusted. This line should be equal to one inch

KEYPLAN
AB
11541170
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
SEPTEMBER 15 2023
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402

DATE ISSUES
09/02/2021 INFORMAL PLANNING APPLICATION
REVISION LIST#DATE
04/22/2022 FORMAL PLANNING APPLICATION
09/30/2022 FORMAL PLANNING APPLICATION #2
01/10/2023 FORMAL PLANNING APPLICATION #3
05/12/2023 FORMAL PLANNING APPLICATION #4
06/30/2023 FORMAL PLANNING APPLICATION #5
08/15/2023 FORMAL PLANNING APPLICATION #6
09/15/2023 FORMAL PLANNING APPLICATION #7
As Indicated
21028.00

STAFF TRASH

ROUTE PLAN
LEVEL B1
TR.A.0.1

SONORA COURT
1170 Sonora Court, Sunnyvale, CA 94086
NOTE: ALL CHUTES WILL EXTEND FROM B1 FLOOR TO 7TH FLOOR Attachment 10

Page 73 of 80 ends

OFFICE

SHOWER &

LOCKERS
(24) 64G
CARTS

STAFF TRASH ROUTE / STAGING PLAN
LEVEL 1SCALE: 116" = 1'-0"
SHEET NOTES:

TRASH ROUTE / STAGING PLAN. LEVEL 1.

1. STAFF TO TRANSPORT RESIDENTIAL CONTAINERS WITH TAYLOR-DUNN BIGFOOT XL CARRIER. STAFF TO TRANSPORT OFFICE CONTAINERS WITH WPT45 27" x 48" ELECTRIC PALLET TRUCK.

2. NOTE THAT TOTER CARTS WILL BE SERVICED BY SIDE-LOAD COLLECTION VEHICLE AND CONTAINERS WILL BE SERVICED BY FRONT-LOAD COLLECTION VEHICLE.

STAFF SHALL STAGE TOTER CARTS AND CONTAINERS ON SEPARATE DAYS.

OFFICE TRASH ROOM
SEE SHEET TR.A.1.2
CORE 1 CHUTE SHAFT
NO INTAKES AT LEVELS 1-3
CORE 1 CHUTE SHAFT
NO INTAKES AT LEVELS 1-3
TRASH STAGING AREA:

SEE SHEET TR.A.1.3 FOR SIDE-LOAD TRUCK MANEUVER
SEE SHEET TR.A.1.4 FOR FRONT-LOAD TRUCK MANEUVER
UP
PE 13 12 11 10 9 8 7 6
5 4 3 2 PW
A
6,952 SF
OFFICE
7,676 SF
OFFICE
866 SF

LOADING
1,364 SF

PARKING
ENTRY1,463 SF

RESIDENTIAL
LOBBY
343 SF

PACKAGE
244 SF

ELECTRIC
536 SF

FIRE PUMP &
BFP
400 SF

ELECTRIC
C
D
E
F
G
H
B
444 SF

TOILET RM
474 SF

TOILET RM
14 1
773 SF

RES BIKE

STORAGE
473 SF

TRANSFORMER
478 SF

GENERATOR
64 SF

SHUTTLE
ELEV

EXIT PASSAGE

8.3%
239 SF

OFFICE BIKE

STORAGE
(18) CLASS I
BIKES
015
RAMP DOWN TO B1
16% SLOPE
82 SF

RESI ELEV
300 SF

RESI STAIR
1,795 SF
OFFICE
GARDEN
1,751 SF
OFFICE
LOBBY
572 SF
MAIL
1,253 SF

BUSINESS
CENTER
5,256 SF
OFFICE
2,363 SF

CORRIDOR
274 SF

RESI / OFFICE
STAIR
13,353 SF
OFFICE
115 SF

RESI ELEV
+0"
1,269 SF

LEASING
22'-1"
37'-1"
(44) CLASS I
BIKES
PL.N
30'-0" 30'-0" 30'-4" 29'-8" 30'-0" 15'-0" 28'-0"
28'-6"15'-0"30'-4"29'-8"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"18'-0"26'-0" 417'-6"
358'-0"
10'-4"
1,500 SF
OFFICE
GARDEN
489 SF
OFFICE

SHOWER &

LOCKERS
169 SF

CORRIDOR
403 SF
OFFICE
TRASH
PL.S.

BLDG ABOVE
25'-0"

SETBACK
10'-0"

SETBACK
10'-0"
26'-0"26'-0"

BLDG ABOVE
175'-8"

AMENITY
OFFICE

CHUTE CORE
41 SF (INSIDE CLEAR)
3'-10"
10'-6"
SHEET NO:

SHEET TITLE:

PROJECT NO.:

DATE:

SCALE:

If this drawing is not 24"x36", then the drawing has been revised from its original size.

Noted scales must be adjusted. This line should be equal to one inch

KEYPLAN
AB
11541170
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
SEPTEMBER 15 2023
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402

STAFF TRASH ROUTE /

STAGING PLAN
LEVEL 1
TR.A.0.2

SONORA COURT
1170 Sonora Court, Sunnyvale, CA 94086
NOTE: ALL CHUTES WILL EXTEND FROM B1 FLOOR TO 7TH FLOOR Attachment 10

Page 74 of 80 ends

RESIDENT PATH OF TRAVEL PLAN
SIM AT LEVELS 4-8SCALE: 116" = 1'-0"
CORE 1 CHUTE INTAKE VESTIBULE
SEE SHEET TR.A.1.0
CORE 2 CHUTE INTAKE VESTIBULE
SEE SHEET TR.A.1.1
230FT DISTANCE FROM FARTHEST
UNIT UTILIZING TRASH CORE 1
230FT DISTANCE FROM FARTHEST
UNIT UTILIZING TRASH CORE 2
UP
PE 13 12 11 10 9 8 7 6 5 4 3 2 PW
A
GARDEN

BELOWGARDEN
BELOW
POOL
C
D
E
F
G
H
B
PLSW
14 1

POOL DECK
WEST

COURTYARD
EAST

COURTYARD
28'-6"15'-0"30'-4"29'-8"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"30'-0"18'-0"26'-0" 015
417'-6"
105 SF

RESI STAIR
100 SF

ELECTRIC
30'-0" 30'-0" 30'-4" 29'-8" 30'-0" 15'-0" 28'-0"
PL.N
6'-0"
175'-6"
255'-10"45'-0"70'-0"
126'-0"
117'-5"

AMENITY
STUDIO
1 BR
2 BR
OFFICE

CORRIDOR ABOVE
99 SF

IDF/ELEC
212 SF
MECH
1,640 SF

CLUBROOM
PL.S.

J typ
13'
5'
typ
typ
467 sf - 485 sf
650 sf - 850 sf
850 sf - 1,200 sf
MIN. - MAX. AREA

COMMUNITY ROOM
PER SMC. 19.38.045
69 SF
MECH
12'-5"
11'-6"
3'-10"

TRASH VESTIBULE
143 SF (INSIDE CLEAR)
12'-0"
9'-7"
4'-0"

TRASH VESTIBULE
116 SF (INSIDE CLEAR)

REC MCREC PRWASTE
SHEET NO:

SHEET TITLE:

PROJECT NO.:

DATE:

SCALE:

If this drawing is not 24"x36", then the drawing has been revised from its original size.

Noted scales must be adjusted. This line should be equal to one inch

KEYPLAN
AB
11541170
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
SEPTEMBER 15 2023
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402

RESIDENT PATH OF

TRAVEL PLAN
SIM AT LEVELS 4-8
TR.A.0.3

SONORA COURT
1170 Sonora Court, Sunnyvale, CA 94086
NOTE: ALL CHUTES WILL EXTEND FROM B1 FLOOR TO 7TH FLOOR Attachment 10

Page 75 of 80 ends

RESIDENTIAL TRASH ROOM PLAN
CORE 1. LEVEL B1

CHUTE INTAKE VESTIBULE
CORE 1. SIMILAR AT LEVELS 1-8
SHEET NOTES:

RESIDENTIAL TRASH ROOM. CORE 1. LEVEL B1.

1. TRASH COLLECTION ROOM IS 2HR FIRE-RATED - RESTRICTED ACCESS.

2. FLOOR SHALL BE FINISHED WITH WATERPROOF DECK COATING. FLOOR TO HAVE MINIMAL SLOPE (1° MAX) AND FLOOR DRAIN. FLOOR LEVEL UNDER COMPACTORS.

3. WALLS SHALL BE FINISHED WITH WASHABLE WATERPROOF SURFACE SUCH AS FRP OR HIGH-GLOSS ENAMEL PAINT 8'-0" AFF.

4. WALL PROTECTION: 12"Hx6"W CONCRETE CURB AT BASE OF WALLS PER PLAN.

INSTALL 18" THICK STEEL DIAMOND TREAD BACKING 6'-0" AFF ALONG WALL ADJACENT TO WASTE COMPACTOR PER PLAN.

5. ROOM SHALL BE MECHANICALLY VENTILATED WITH (1) CFM/SF PER 2019 CBC.

6. INSTALL 8'-0" WIDE ROLL-UP DOOR FOR TRANSFERRING CONTAINERS. INSTALL 3'-0" NFPA COMPLIANT DOOR FOR FIRE EGRESS.

7. (1) 30"∅ 16G GALVANIZED STEEL CHUTE WITH APOLLO MODEL A500 SINGLE-SIDE LATCH COMPACTOR AND 2CY FL COMPACTOR CONTAINER FOR WASTE. CHUTE TERMINATES 5'-9" AFF.

8. (2) 24"∅ 16G GALVANIZED STEEL CHUTES WITH 96-GALLON TOTER CARTS FOR PAPER RECYCLING AND MIXED-CONTAINER RECYCLING. CHUTES TERMINATE 4'-0" AFF.

9. PP: COMPACTOR POWER PACK SHALL BE FLOOR-MOUNTED. (1) 5HP 3-PHASE, 208/230/460V. (1) 30A DISCONNECT 60" AFF.

10. MCP: CHUTE MASTER CONTROL PANEL SHALL BE WALL-MOUNTED 60" AFF. MUST

ALLOW LOCK DOWN OF CHUTE INTAKES FOR EXCHANGING CONTAINERS AND WASHING CHUTES. (3) TOTAL. 120V 15A SERVICE OUTLET REQUIRED.

11. AC: AIR COMPRESSOR (OIL LESS) 4610AC WITH AUTOMATIC TANK DRAIN VALVE. 2 HP PEAK, TWIN TANK CAPACITY 4.6 GALLONS, VOLTAGE @ 60 HZ 110 VOLTS, CURRENT 8.5 AMPS TO POWER THE CHUTE INTAKE DOORS. (2) TOTAL.

12. OC: ODOR CONTROL UNIT SHALL BE WALL-MOUNTED 60" AFF. 120V 15A SERVICE OUTLETS REQUIRED.

13. HB: HOT AND COLD HOSE BIBB SHALL BE WALL-MOUNTED 60" AFF.

14. PROVIDE ELECTRIC PALLET TRUCK FOR TRANSFERRING CONTAINERS. 4000LB CAPACITY WITH 45.5" TURNING RADIUS. 120V 15A SERVICE OUTLETS REQUIRED.

STAFF TO MOVE CONTAINERS TO A POSITION WHERE THEY CAN BE ATTACHED TO THE TAYLOR-DUNN.

15. PROVIDE TAYLOR-DUNN BIGFOOT XL CARRIER STORED OUT OF THE TRASH ROOM WITHIN THE GARAGE. STAFF TO TRANSPORT CONTAINERS UP THE RAMP TO THE TRASH STAGING AREA PRIOR TO COLLECTION TIMES. REQUIRES 120V 14A SERVICE OUTLETS. 7500LB TOW CAPACITY.

16. PROVIDE (1) UNDEDICATED 120V 15A SERVICE OUTLET REQUIRED FOR STAFF MAINTENANCE PURPOSE.

17. CHUTE DISCHARGE DOORS: WILKINSON TYPE-A, B-LABEL CONSTRUCTION 90 MINUTE FIRE-RATED, HORIZONTALLY ROLLING DOOR, HELD OPEN BY 165°F FUSIBLE LINK, SHOWN IN CLOSED POSITION.

CHUTE INTAKE VESTIBULES. CORE 1. SIM AT LEVELS 1-8.

18. CHUTE INTAKE VESTIBULES SHALL BE 2HR FIRE-RATED WITH 2HR FIRE-RATED ACCESS DOOR FOR RESIDENTIAL ACCESS. 5'-0" MIN DIAMETER WHEELCHAIR TURNING SPACE REQUIRED PER ADA REQUIREMENTS. POWER TO INTAKE DOORS SUPPLIED BY MCP. PROVIDE (3) 15x18 BOTTOM HINGED, NORMALLY CLOSED

LOW-VOLTAGE, ELECTRICALLY INTERLOCKED, AUTOMATIC OPENING DOORS FOR WASTE, PAPER RECYCLING, AND MIXED-CONTAINER RECYCLING AT EACH FLOOR.

SEE DETAIL 1/TR.A.2.0. 30" x 48" FRONT APPROACH REQUIRED PER ADA STANDARDS. PROVIDE 35-GALLON TOTER CART FOR FOOD SCRAPS AND U-LINE COLLAPSIBLE WIRE CONTAINER MODEL H-1731 FOR CARDBOARD DISPOSAL.

19. 2HR FIRE-RATED FACE WALL SHALL NOT BE ERECTED UNTIL CHUTES HAVE BEEN INSTALLED. FOR SOUND PROOFING PURPOSES, DOUBLE STUD-WALLS ARE REQUIRED ADJACENT TO OCCUPIED SPACES. INTERIOR OF SHAFT SHALL BE TAPED TO PREVENT ODOROUS AIR LEAKING INTO OCCUPIED SPACES.

20. PROVIDE ROUND FLOOR OPENINGS AT CONCRETE FLOORS AND SQUARED FLOOR OPENINGS AT WOOD-FRAME CONSTRUCTION. SEE PLAN FOR DIAMETER OF OPENINGS. INSTALL FLOOR SUPPORT FRAME AT EACH FLOOR PENETRATION TO SECURE CHUTE. SEE DETAIL 9/TR.A.2.0 FOR ANCHORING. POUR RINGS WILL VARY BASED ON THICKNESS OF FLOOR SLAB - PROVIDED BY MANUFACTURER.

GENERAL NOTES.

1. ANY DESIGNS OR SOLUTIONS SHOWN IN DRAWING, EITHER DIRECT OR IMPLIED,

ARE HEREBY CLARIFIED AS EXAMPLES AND SHALL NOT BE CONSIDERED COMPLETE DESIGNS FOR CONSTRUCTION. THESE DRAWINGS ARE INTENDED TO SUPPLEMENT THE SUBMITTAL PACKAGE FROM ARCHITECT.

2. ANY PARTIAL INFORMATION, OMISSIONS, OR INACCURATE DESCRIPTIONS OF

WORK SHOWN IN DRAWINGS, WHICH ARE NECESSARY TO PERFORM THE SCOPE OF WORK, SHALL NOT RELIEVE THE CONTRACTOR FROM COMPLETION OF WORK.

ALL WORK SHALL BE PERFORMED TO SATISFY THE MINIMUM REQUIREMENTS OF THE CURRENT APPLICABLE BUILDING CODES.

3. CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS AND CONDITIONS PRIOR TO START OF CONSTRUCTION. THE ARCHITECT SHALL BE PROMPTLY NOTIFIED OF ANY INCONSISTENCIES AND/OR DISCREPANCIES.

TRASH COLLECTION ROOM- CORE 1
B1
4 3
D
190 SF

RESI / OFFICE
STAIR
TRASH
REC MC

AIR COMPRESSOR
3 FT
ACCESS
DOOR
WASTE
POWER PACK(1)
96 GAL.

REC PR
96 GAL.

REC MC96 GAL.

REC MC
96 GAL.

REC PR
96 GAL.

REC MC
96 GAL.

REC PR
96 GAL.

REC PR
(3)CHUTE MASTER CONTROLS
120V 15A SERVICE OUTLETS. (TYP)
2 CY FL

COMPACTED
WASTE
2 CY FL

COMPACTED
WASTE
3 CY FL
LOOSE

CARDBOARD
8'-0" ROLL-UP DOOR
4 D
4 D
SIM AT LEVELS 1-3
SIM AT LEVELS 4-8
SCALE: 14" = 1'-0" SCALE: 14" = 1'-0"

SECTIONS
AT CORE 1 RESIDENTIAL TRASH ROOMSCALE: 14" = 1'-0"
ELEC. PALLET
TRUCK SEE NOTE 14
REC PR
2CY WASTE

CONTAINER

CHUTE DISCHARGE
DOOR

APOLLO MODEL
A500 COMPACTOR
30"Ø CHUTE
WASTE
(1) 30"Ø GALVANEAL
CHUTE
LEVEL 1
LEVEL 2

SECTION A-A
MIXED

CONTAINER

RECYCLING
PAPER

RECYCLING
(2) 24"Ø GALVANEAL
CHUTE

SECTION B-BSECTION C-C
CHUTE

DISCHARGE
DOOR
24"Ø GALVANEAL CHUTE
96G
TOTER
GALV
HOPPER
GALV
HOPPER
GALV
HOPPER

CHUTE CORE
39 SF (INSIDE CLEAR)
9'-7"
4'-0"
4'-0"

TRASH VESTIBULE
116 SF (INSIDE CLEAR)

U-LINE COLLAPSIBLE

WIRE CONTAINER
MODEL H-1731
3412" HEIGHT
FOOD
SCRAP
35 GAL

REC MCREC PR
WASTE
12'-0"
9'-7"
4'-0"
SHEET NO:

SHEET TITLE:

PROJECT NO.:

DATE:

SCALE:

If this drawing is not 24"x36", then the drawing has been revised from its original size.

Noted scales must be adjusted. This line should be equal to one inch

KEYPLAN
AB
11541170
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
SEPTEMBER 15 2023
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402
5 4

S AN FR AN CI S C O
CALIFORNI A 9 41 07
415. 489. 2 224 TEL
415. 358. 91 00 FAX
WWW W . RNSSTUDIO. O C M
01 SECOND STREET
TH L F OR O STE. , 402

TRASH ROOM PLAN
TR.A.1.0

SONORA COURT
1170 Sonora Court, Sunnyvale, CA 94086
NOTE: ALL CHUTES WILL EXTEND FROM B1 FLOOR TO 7TH FLOOR Attachment 10

Page 76 of 80 ends

RESIDENTIAL TRASH ROOM PLAN
CORE 2. LEVEL B1

CHUTE INTAKE VESTIBULE
CORE 2. SIMILAR AT LEVELS 1-8SCALE: 14" = 1'-0"
SHEET NOTES:

RESIDENTIAL TRASH ROOM. CORE 2. LEVEL B1.