Attachment A
Scelzi Enterprises Inc. Quote
for Vehicle 63207
2286 E. Date Ave.
Fresno, CA 93706
Phone: 559-237-5541
Fax: 559-237-5554
www.SEINC.com
Quotation
314508
Date: 3/24/2026, 8:00:11 AM
User: Romero, Melissa
Bill To: CITY OF VICTORVILLE Ship To: Riverside Will Call Attn: RICKER, JEFFERY Attn: Scelzi Enterprises
14177 MC ART RD. 2693 Rubidoux Blvd.
VICTORVILLE, CA 92392 Riverside, CA 92509
760- 955-5211
Quote Date: 03/24/2026 Salesman: Quezada, Carlos
Expiration Date: 04/23/2026 Ship Via: WILL CALL, Riverside, CA (Will Call) Sales Tax Rubidoux @ 7.750% Terms: COD
PO Number:
Notes:
MOUNT IN FRESNO
PAINT BODY WHITE
FUEL TANK LOCATION TBD
NOTES:
1.) AUXILARY LEAF SPRINGS MIGHT BE REQUIRED AND RECOMMENDED AFTER CUSTOMER LOADS TOOLS
AND NOT LEVEL TO BE DONE BY CUSTOMER AT LATER DATE
2.) RELOCATE EXHAUST PIPE ON PASSENGER SIDE
3.) WATER FIELD DIVISION TRUCK REPLACEMENT FOR CITY OF VICTORVILLE UNIT/TRUCK #63207 Qty Part Number Description Total Tax
1 CUSTOMER
TRUCK
2026 - RAM - 4500 - 4X2 - REG CAB - DRW - DIESEL - WHITE - 60"CA - VIN# 3C7WRKAL7PG628151
$0.00
Quotation
314508
Date: 3/24/2026, 8:00:11 AM
User: Romero, Melissa
1 SFB 8 X 10 SCELZI TAILPLATE
- 3/16” SMOOTH STEEL FLOOR
- CROSSMEMBERS ON 12" CENTERS.
- “NO” ROPE HOOKS
- “NO” AJ BAER STAKE POCKETS.
-LED LIGHTS AND OEM TAILLIGHTS
- CALIFORNIA DOCK BUMPER.
1EA - ST3 HEADBOARD 2”X3” X 120 WALL TUBING SQUARE HEADBOARD WITH 50/50 PERFORATION
1EA - NATIONAL SIGNAL #2161762 25 LAMP L.E.D 180 DEGREE ROTATION 36”X72” ARROW BOARD WITH POWER TILT FRAME MOUNTED ON
HEADBOARD MOUNTS WIRE HOT TO CONTROL IN CAB
2EA - WHEELEN L.E.D BEACON LIGHTS #L31HAF MOUNTED ON BEACON MOUNT #SE091020 ON BOTH SIDES OF ARROW BOARD WIRED TO
UPFITTER SWITCH IN CAB AND LABEL
NOTE: PROGRAM ALTERNATE SYNC SET TO PHASE 1
4EA - WHEELEN ION SURFACE MOUNT SUPER LED STROBE LIGHTS AMBER/ AMBER MODEL# IONSMA MOUNT (2) EA CENTER BELOW RUB RAIL SIDE AND (2) EA REAR OF BODY WIRE TO HOT UPFITTER SWITCH IN CAB AND LABEL
NOTE: PROGRAM ALTERNATE WITH DOUBLE FLASH 75 (PH 1)
1EA - REINFORCE FLOOR AND MOUNTING PLATE TO BE LOCATED ON
PASSENGER SIDE
1EA - SUPPLY AND INSTALL WACHS #77-000-54 STANDARD LX (DIESEL)
VALVE MAINTENANCE SKID VMS, ONTO FLOOR OFF SET AT REAR CORNER
PASSENGER SIDE & ADD A SEPERATOR CHARGE WIRE TO THE UNIT NOTE: IF EQUIPPED WITH DIRECTIONAL LIGHT DO NOT INSTALL PER
CUSTOMER
1EA - CLASS 5 RECIEVER HITCH WITH 2” REDUCER SLEEVE
NOTE: RATED @ 18,000LB PULLING CAPACITY & 1800LB TOUNGE WT 1EA - 7 PRONG FLAT RV TRAILER PLUG#12707
1EA - INSTALL FACTORY BACK UP CAMERA IF EQUIPPED
$145,426.00 T
1 TOOL BOX 108”X18”X18” TOP MOUNTED TOOL BOX WITH DIVIDER AT CENTER CLOSED
TOP MOUNT BEHIND HEADBOARD ON DRIVERSIDE
1EA - 12” TALL X 108'' L X 18'' DEEP 14 GAUGE PERFORATED BASKET OPEN
AT TOP MOUNTED ON
1'' X 2'' TUBING ON TOP OF CLOSED TOP TOOL BOX DRIVERSIDE $0.00
2 TOOL BOX 36”X18”X18” UNDERBODY TOOLBOXES MOUNTED FLUSH IN FRONT OF
REAR WHEEL ON BOTH SIDES
$0.00
Quotation
314508
Date: 3/24/2026, 8:00:11 AM
User: Romero, Melissa
DISCLAIMERS
TERMS: Standard terms are Net 10 Days, any deviations need to be in writing before production CHASSIS: Scelzi Enterprises, Inc. is not responsible for flashing or modification of any chassis modules due to the installation of a body
Including but not limited to camera installation, erratic turn signal operation, etc CHANGES: Each change after quote is accepted will constitute a $600.00 fee in addition to the cost of the change No changes will be made to orders 2 weeks prior to production start date DRAWINGS:Any changes to drawings after acceptance and 2 weeks prior to production start date will constitute a $500.00 fee or more at $150.00 per hour
No changes will be made to drawings 2 weeks prior to production start date PAINT: Scelzi Enterprises, Inc. does not guarantee a perfect color match due to inconsistencies in factory paints and procedures
THIS WORK AUTHORIZED BY DATE
Payment in full on completion of job if credit arrangements have not been made in advance Estimate Prepared By:
Romero,
Melissa
The above quotation is submitted according to specifications submitted by customer. Any alterations or changes increasing production costs will be charged for accordingly. Sales Rep: Quezada, Carlos
2 TOOL BOX 30”X18”X18” UNDERBODY TOOLBOXES MOUNTED FLUSH BEHIND REAR
WHEEL ON BOTH SIDES
$0.00
1 HAZ MAT - HWD
FEE
HAZARDOUS WASTE DISPOSAL FEE $50.00
1 WEIGHT
CERTIFICATE
WEIGHT CERTIFICATE OF COMPLETED UNIT $50.00
1 WILL CALL CUSTOMER TO PICK UP COMPLETED UNIT IN RIVERSIDE Sub Total $145,526.00
Sales Tax $11,166.98
Total $156,692.98