Attachment B
Scelzi Enterprises Inc. Quote
for Vehicle 23409
2286 E. Date Ave.
Fresno, CA 93706
Phone: 559-237-5541
Fax: 559-237-5554
www.SEINC.com
Quotation
314515
Date: 3/24/2026, 8:16:20 AM
User: Romero, Melissa
Bill To: CITY OF VICTORVILLE Ship To: Riverside Will Call Attn: RICKER, JEFFERY Attn: Scelzi Enterprises
14177 MC ART RD. 2693 Rubidoux Blvd.
VICTORVILLE, CA 92392 Riverside, CA 92509
760- 955-5211
Quote Date: 03/24/2026 Salesman:
Expiration Date: 04/23/2026 Ship Via: WILL CALL, Riverside, CA (Will Call) Sales Tax Rubidoux @ 7.750% Terms: COD
PO Number:
Notes:
MOUNT IN RIVERSIDE
PAINT BODY WHITE
FUEL TANK LOCATION TBD
NOTES:
1.) NO STAKE POCKETS
2.) WATER FIELD DIVISION TRUCK REPLACEMENT FOR CITY OF VICTORVILLE UNIT/TRUCK #23409
3.) QUOTE IS SUBJECT TO ADDITIONAL SURCHARGES PRICE IS VALID FOR 30 DAYS QUOTE Qty Part Number Description Total Tax
1 CUSTOMER
TRUCK
2023 - RAM - 5500 - 4X2 - REG CAB - DRW - DIESEL - WHITE - 120"CA - VIN# TBD
$0.00
Quotation
314515
Date: 3/24/2026, 8:16:20 AM
User: Romero, Melissa
1 SFB 8 X 16 - 3/16" STEEL DIAMOND PLATE FLOOR
- CROSSMEMBERS ON 12" CENTERS.
- ROPE HOOKS ON EACH CROSSMEMBER.
- "NO" A.J. BAER STAKE POCKETS.
- L.E.D CLEARANCE LIGHTS SIDES & REAR (2) EA 4” L.E.D RED ROUND STOP/ TURN LIGHTS #STL13RLVB & (2) EA 4” L.E.D CLEAR ROUND BACK UP LIGHTS #BUL06CB MOUNTED ON RUB-RAIL
- CALIFORNIA DOCK BUMPER (CUSTOM FOR VIBE PLATE APPLICATION) 1EA - ST3 HEADBOARD 2”X3” X 120 WALL TUBING SQUARE HEADBOARD WITH 50/50 PERFORATION
1EA - NATIONAL SIGNAL #2161762 25 LAMP L.E.D 180 DEGREE ROTATION 36”X72” ARROW BOARD WITH POWER TILT FRAME MOUNTED ON
HEADBOARD MOUNTS WIRE HOT TO CONTROL IN CAB
1EA - GO LIGHT LED MODEL 20204GT (WHITE) WITH IN DASH REMOTE MOUNTED 9X9 MOUNTING PLATE PART#SE091020 ON PASSENGER SIDE
NEXT TO ARROWBOARD AND WIRED HOT
2EA - WHEELEN L.E.D BEACON LIGHTS #L31HAF MOUNTED ON BEACON MOUNT #SE091020 ON BOTH SIDES OF ARROW BOARD WIRED TO
UPFITTER SWITCH IN CAB AND LABEL
NOTE: PROGRAM ALTERNATE SYNC SET TO PHASE 1
4EA - WHEELEN ION SURFACE MOUNT SUPER LED STROBE LIGHTS AMBER/ AMBER MODEL# IONSMA MOUNT (2) EA FRONT GRILL AND (2) EA REAR OF
BODY WIRED TO HOT UPFITTER
SWITCH IN CAB AND LABEL
NOTE: PROGRAM ALTERNATE WITH DOUBLE FLASH 75 (PH 1)
2EA - FLAT BED CUT OUT FOR DOUBLE SIDE ON BOTH SIDES
1EA - 60” TALL X 58” WIDE X20” DEEP DOUBLE COMPARTMENT WITH (5) EA.
ADJUSTABLE SHELFS MOUNTED IN FRONT 60”X34” COMPARTMENT AND SHELF BRACKETS AND (5) EA. ADJUSTABLE SHELFS MOUNTED IN FRONT 60”X24” COMPARTMENT ON CUT OUT DRIVERSIDE
1EA - 60” TALL X 24” WIDE X20” DEEP COMPARTMENT WITH SHELF BRACKETS AND (2) EA ADJUSTABLE SHELFS MOUNTED ABOVE ROLLER DRAWERS IN 2ND 24” COMPARTMENT CUT
OUT DRIVERSIDE
7EA - SCELZI ROLLER DRAWERS #250 STARTING FROM BOTTOM (1) EA. 6” TALL “NO” DIVIDERS THEN (2) EA. 4” TALL “NO” DIVIDERS THEN (4) EA. 3” TALL ROLLER DRAWERS WITH DIVIDERS ON 2” CENTERS MOUNTED IN 2ND 60”X24” COMPARTMENT IN DRIVERSIDE
1EA - 60” TALL X 58” WIDE X20” DEEP DOUBLE COMPARTMENT WITH SHELF BRACKETS AND (3) EA.
ADJUSTABLE SHELFS MOUNTED ABOVE (1) EA 2 POSITION PIVOTING JACK HAMMER STAND - SE192002 IN FRONT 60”X34” COMPARTMENT AND $107,598.00 T
Quotation
314515
Date: 3/24/2026, 8:16:20 AM
User: Romero, Melissa
OXY/ACC, HOSE HOLDER, AND LOUVERS MOUNTED IN FRONT 60”X24”
COMPARTMENT CUT OUT PASSENGER SIDE
1EA - 60” TALL X 24” WIDE X20” DEEP COMPARTMENT SHELF BRACKETS AND (2)EA. ADJUSTABLE SHELFS MOUNTED ABOVE ROLLER DRAWERS ON 2 ND 24” COMPARTMENT CUT OUT PASSENGER SIDE
7EA - SCELZI ROLLER DRAWERS #250 STARTING FROM BOTTOM (1) EA. 6” TALL “NO” DIVIDERS THEN (2) EA. 4” TALL “NO” DIVIDERS THEN (4) EA. 3” TALL ROLLER DRAWERS WITH DIVIDERS ON 2” CENTERS MOUNTED IN 2ND 60”X24” COMPARTMENT IN PASSENGER SIDE
2EA - BARRICADE HOLDER MOUNTED ON BACK WRAPPER BEHIND FRONT 60”X34” & 60”X24 COMPARTMENTS DRIVERSIDE
5EA - FREE STANDING CONE HOLDER – POLE STYLE #SE110122 MOUNTED
ON FLOOR PASSENGER SIDE EVENLY SPACES FROM HEADBOARD TO REAR
1EA - SPRAY POLYUREA LINER ONTO FLOOR TO EDGE OF RUB-RAIL BACK
WRAPPERS OF COMPARTMENTS HEADBOARD TO TOP
1EA - HUSQVARNA PP 518 GAS POWERED POWER PACK FOR HYDRALIC PRODUCTS 34” LONG X 22” WIDTH X 29” TALL PART# SP/967153602-21 MOUNTED ON TOP OF COMPARTMENTS PASSENGER SIDE NOTE: FITMENT
TO BE CONFIRMED BY ENGINEERING
1EA - 10GA REINFORCEMENT ON TOP OF 60” TALL COMPARTMENTS ON
BOTH SIDES
1EA - VANAIR VIPER G80 GV3 COMPRESSOR 24.9 HP HONDA IGX800 V-TWIN GAS DRIVEN 80 CFM @ 100 PSIG @ 8700 RPM KIT#1202-001 ISOLATOR KIT #277979 FILTER, MOISTURE WITH OIL REGULATOR FLR ¾” #263645 FUSE VELOCITY SCVL6 MOUNTED ON TOP OF COMPARTMENTS
DRIVERSIDE
1EA - REEL CRAFT ELECTRIC AIR REEL #EA33106-M12D – 3/4 IN. x 50 FT. 3000 PSI AIR HOSE REEL WITH 12V ELECTRIC MOTOR INCLUDE HOSE
PLUMB TO AIR COMPRESSOR MOUNTED UNDER BODY PASSENGER SIDE
WITH BALL STOP
1EA - RELOCATE EXHAUSE PIPE ON PASSENGER SIDE IF NEEDED 1EA - MOUNT REAR ENTRY UNDERBODY STORAGE AREA FOR VIBRATOR
PLATE MACHINE MOUNTED BEHIND REAR WHEEL ON DRIVER SIDE
1EA - INSTALL FACTORY BACK UP CAMERA IF EQUIPPED
1EA - CLASS 5 RECIVER HITCH WITH 2” REDUCER INSERT NOTE: RATED @ 18000LB PULLING CAPACITY AND 1800LB TOUNGE WT
1EA - 7 PRONG FLAT RV ELECTRIC TRAILER PLUG#12707
Quotation
314515
Date: 3/24/2026, 8:16:20 AM
User: Romero, Melissa
DISCLAIMERS
TERMS: Standard terms are Net 10 Days, any deviations need to be in writing before production CHASSIS: Scelzi Enterprises, Inc. is not responsible for flashing or modification of any chassis modules due to the installation of a body
Including but not limited to camera installation, erratic turn signal operation, etc CHANGES: Each change after quote is accepted will constitute a $600.00 fee in addition to the cost of the change No changes will be made to orders 2 weeks prior to production start date DRAWINGS:Any changes to drawings after acceptance and 2 weeks prior to production start date will constitute a $500.00 fee or more at $150.00 per hour
No changes will be made to drawings 2 weeks prior to production start date PAINT: Scelzi Enterprises, Inc. does not guarantee a perfect color match due to inconsistencies in factory paints and procedures
THIS WORK AUTHORIZED BY DATE
Payment in full on completion of job if credit arrangements have not been made in advance Estimate Prepared By:
The above quotation is submitted according to specifications submitted by customer. Any alterations or changes increasing production costs will be charged for accordingly. Sales Rep:
1 FB-SIDERACK 15” TALL SET OF FOLD DOWN SIDE RACKS WITH STAINLESS STEEL STAKES & ALUMINUM SLATS WITH WESTERN GATE LATCHES
NOTE: MOUNTED BEHIND COMPARTMENTS BOTH SIDES AND ACROSS REAR
$0.00
1 HAZ MAT -
HWD FEE
HAZARDOUS WASTE DISPOSAL FEE $50.00
1 WEIGHT
CERTIFICATE
WEIGHT CERTIFICATE OF COMPLETED UNIT $50.00
1 WILL CALL CUSTOMER TO PICK UP COMPLETED UNIT IN RIVERSIDE $0.00 Sub Total $107,698.00
Sales Tax $8,338.85
Total $116,036.85