APG-Neuros Turbo Blower Core
Proposal Reference# 00860-8927 R2 (Air Bearing option) APG-Neuros Turbo Blower Scope of Supply Proposal
Visalia, CA - New Blowers
Prepared By APGN Inc. dba APG-Neuros
August 14, 2026
APGN proprietary Information
APGN Inc.
1270 Michele-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com
APGN-PM-FORM-193-E.06, February 20, 2019
Application
Blower Installation Location
Working Fluid
Elevation ft
Ambient Pressure psia
Customer Design Requirements DP1 DP2
Inlet Pressure 14.52 14.52 psia
Inlet Temperature 85.0 45.0 °F
Relative Humidity 36 70 %
Duty Discharge Pressure 11.40 11.40 psig
System Flow Rate 7,769 7,769 SCFM
Flow Rate per Blower 7,769 7,769 SCFM
Blower Units on Duty 1 1 Units
Model
Rated Motor Output Power HP
Power @ Design Condition per Blower 415 383 bhp
Wire-to-Air Power @ Design Condition per Blower 336 310 kW Maximum Air Flow @ Duty Discharge Pressure per Blower 7,779 8,136 SCFM Minimum Air Flow @ Duty Discharge Pressure per Blower 3,489 3,649 SCFM Turndown from Maximum to Minimum 55.1% 55.1% %
Discharge Temperature @ Design Condition 217.5 163.4 °F Maximum Discharge Pressure 16.80 16.80 psig
Rise-to-Surge 5.40 5.40 psig
Note:
SCFM defined at 68 Deg F,14.696 psia and 36% relative humidity Noise Level : +/- 2dB
Wire power figures are reported based on ASME PTC-10 Performance Test Code standard. 450
Available Blower Performance
NX450-C090A
331
14.52 Visalia, CA - New Blowers - APG- Neuros Turbo Blower - Performance Data Ambient Conditions
Aeration
Indoor
Air
APGN Inc. proprietary Information
APGN Inc.
1270 Michèle-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20 2019 Blower Inlet Air Entry type Flanged
Inlet Flange Size (Optional, if louvered inlet does not apply) 24 Inches Discharge Flange Size 16 Inches
Maximum Noise Level @ 3 feet 80 dBA
Input Voltage/Phase/Frequency 480/3/60 V/Phase/Hz
Full Load Amperage 487 Amps
Visalia, CA - New Blowers - APG- Neuros Turbo Blower - Performance Data Dimensions and Specification
APGN Inc. proprietary Information
APGN Inc.
1270 Michèle-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20 2019 Visalia, CA - New Blowers - APG - Neuros Turbo Blower - Performance Curves APGN proprietary Information
APGN Inc.
1270 Michele-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20, 2019 Visalia, CA - New Blowers - APG - Neuros Turbo Blower - Performance Curves APGN proprietary Information
APGN Inc.
1270 Michele-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20, 2019 Item Equipment Item (See Scope for more information) Unit Price (USD) Total Price (USD) NX450-C090A High Speed Turbo Blower 1
Louver inlet 1
Warranty One (1) Year on Blower equipment 1
FOB Job Site 1
2 0 Not Included
2 Start-up and Training services including travel and expenses (1 Trip and 2 days) 1 Included 16" Discharge Check Valve 1
16" Discharge Butterfly Valve, Manual with Chainwheel operator 1 16" EPDM Discharge Duct Expansion Joint 1
6" Blow-off silencer (Flanged outlet)* 1
2 Not Included
Harmonic Filter - Installed inside the blower enclosure 1 Included Notes
Taxes and Duties are Not Included
Anchor bolts not included in APGN scope
Visalia, CA - New Blowers - APG - Neuros Turbo Blower - Price & Summary Budgetary Price (U.S. Dollars, 2026 Economy Year)
August 14, 2026
Proposal Reference# 00860-8927 R3 (Air Bearing
option) QTY
* The blow-off valve discharge shall be supplied with a properly sized blow-off silencer for discharge noise levels not to exceed 95 ± 5 dBA at 5 feet from blower at HMI height during blow-off operation.
While our blower is manufactured domestically in the United States, the recently announced tariffs on imported materials, especially steel and aluminum, are expected to increase the cost of raw materials used in our blower production. The actual cost impact will be assessed based on the tariffs in effect at the time of order execution.
Blower Accessories
Additional Equipment Adders
4 3 Included
263,450.00$ 263,450.00$
1 Included
Manufacturer Services (See Scope for more information) APGN Inc. proprietary Information
APGN Inc.
1270 Michèle-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20, 2019 Visalia, CA - New Blowers - APG - Neuros Turbo Blower - Scope of Supply APGN Inc., agrees to sell to the Buyer, the equipment designated as included in this proposal subject to the Seller's General Terms and Conditions of Sales available upon request and special conditions outlined herein in this proposal.
1. Standard Turbo Blower Equipment (Included)
1.1 Blower Package
1. Blower Core with Permanent Magnet Synchronous Motor, Air Bearing and Forged Impeller
2. High Performance Variable Speed Drive / Inverter
3. Local Control Panel for Control and Monitoring with Allen Bradley - Compact Logix L320 PLC
4. Remote Control capability via Ethernet, LAN or Hard wiring
5.Temperature Sensors for motor, bearing, inlet and discharge air flow
6. Pressure Sensors for discharge conditions
7. Pressure Sensor and alert for air filter condition
8. Built in Flow Calculation
9. Built in Speed Measurement
10. Internal Expansion Joint
11. Internal vibration and dynamic effect Absorption Mounts
12. Line Input Reactor to maintain high power factor
13. Sinewave (Sinus) Filter
14. Built in Hi-Flow Synthetic pleated inlet air filters with 98% efficiency @ 10-microns
15. Set of pre-filters with 89% by weight per ASHRAE 52-76 and MERV 8 rating
16. Voltage Surge Protection
17. Uninterruptable Power Supply (UPS)
18. Remote Monitoring System (RMS)
19. All the component above are included in a Sound Enclosure
2. Standard Documentation (Included)
Submittal Information & Shop Drawings: PDF Electronic File
1. Bill of Material
2. Installation Drawings
3. Electrical and Control Drawings
4. Operation and Maintenance Manual
5. Commissioning Instructions
3. Standard Tests (Included)
1. Standard Blower Package Functional Acceptance Test
2. Unwitnessed Factory Performance Test
3. Witnessed Factory Performance Test to be provided extra upon request.
4. Quality Assurance and Control and Product Certification A. APG-Neuros Quality Assurance program is ISO 9001 certified B. APG-Neuros Turbo Blower is UL / CSA/ CE certified APGN Inc. proprietary Information
APGN Inc.
1270 Michèle-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.06 February 20, 2019 Visalia, CA - New Blowers - APG - Neuros Turbo Blower - Scope of Supply
5. Proposal Validity and Seller Terms and Conditions
A. Unless otherwise specified elsewhere in the Sales Agreements, the prices in this proposal are valid for ninety (90) days from the issue date on the cover page.
B. This proposal, unless otherwise specified herein this document, is subject to the Seller Standard Terms and Conditions available upon request.
C. The final selling price is subject to change contingient on final scope
6. Payment Terms:
10% on acceptance of shop drawings
10% on release for production for material procurement
60% on delivery of equipment to site
20% on completion of start-up and final acceptance by the owner All invoices are to be paid Net 30 days
APG-Neuros will bill if delivery does not occur within 45 days after completion of production and will store the equipment at no extra charge.
1.5% Interest charge per month will be added to past due accounts of 45 days and over Letter of Credit listing draw of payments against above deliverables will apply for Sales outside US and Canada. 100 % of invoice amount shall be payable by bank wire transfer without deduction and to be paid Net 30 days after invoice date.
Payment shall not be dependent on the buyer being paid by any third parties or equipment acceptance by owner.
7. Delivery Lead time:
Submittal package will be provided within 2 to 4 weeks of acceptance of Order.
Shipment will be made 16-20 weeks after approval of Submittals Add Five percent (5%) escalation to Price for each partial or full quarter that shipment is extended beyond one year after order acceptance
8. Warranty
A. Standard Warranty (INCLUDED)
One (1) year from commissioning date or Eighteen (18) months from delivery, whichever occurs first.
Warranty will begin upon successful completion of start-up and certification for full-scale operation by APG-Neuros, or Six (6) months after shipment, whichever occurs first.
Warranty begin upon completion of the project and acceptance of the equipment as determined by the Engineer or End User.
APGN Inc. proprietary Information
APGN Inc.
1270 Michèle-Bohec, Blainville, QC, J7C-5S4
Tel: 450-939-0799 Fax: 450 939 2115
www.apg-neuros.com APGN-PM-FORM-193-E.05 February 20, 2018