ACTION:
____________________________
Clerk/Secretary
Department: Fire Item No: C14
Prepared by: Maia Hodge, Management Analyst Meeting Date: June 25, 2024 Approved by:
Gerard Washington, Fire Chief
John Conley, City Manager Agenda Location: Consent Calendar SUBJECT: MSA SELF-CONTAINED BREATHING APPARATUS – AWARD OF CONTRACT RECOMMENDATION: Adopt City Council Resolution No. 2024- , awarding a contract for services to L.N.
Curtis and Sons for the MSA Self-Contained Breathing Apparatus Project.
CORRELATION TO CITY COUNCIL GOALS: Public Safety and Fiscal Responsibility.
PRIOR ACTION: On June 27, 2023, adopted City Council Resolution No. 2023-117, approving the Fiscal Years 2023/24 and 2024/25 Operating Budget (Vote: 5-0).
On August 9, 2011, adopted City Council Resolution No. 2011-130, approving the agreement with Bauer Compressors for the purchase of self-contained breathing apparatus (Vote: 5-0).
STATEMENT ON THE SUBJECT: The City of Vista appropriated funding in September 2023 for the purchase of self-contained breathing apparatus (SCBA) after the attempt to secure regional funding for SCBA was not successful with the Fiscal Year (FY) 2021 FEMA Assistance to Firefighters grant application.
Self-contained breathing apparatus are required personal protective equipment by the National Fire Protection Association (NFPA) for all firefighters during fire incidents. The useful life of SCBA systems is ten years. The Fire Department seeks to replace one hundred SCBA systems including air tanks and associated accessories. The current SCBA inventory of the Vista Fire Department is thirteen years old.
Staff advertised the project for competitive bids on May 28, 2024, on the City’s procurement website and online procurement portal, OpenGov. On June 12, 2024, the following bids were received:
Bidder’s Name Office Location Total Bid Amount
L.N. Curtis and Sons Walnut Creek, CA $ 991,125.55
Bauer Compressors Livermore, CA $1,096,452.10
Staff reviewed the bid from L.N. Curtis and Sons, and determined they were the lowest responsible bidder who responded to all the requirements of the bid request. Therefore, staff recommends that the City Council award the contract for the MSA Self-Contained Breathing Apparatus Project to L.N. Curtis and Sons.
AGENDA
REPORT
CITY COUNCIL
COMMUNITY DEVELOPMENT COMMISSION
SUCCESSOR AGENCY
BUENA SANITATION DISTRICT
JOINT POWERS FINANCING AUTHORITY
Approved above recommendation, adopted City Council Resolution No. 2024-117. Vote: 4-0 (Green absent)
MEETING DATE: June 25, 2024 PAGE 2
SUBJECT: MSA SELF-CONTAINED BREATHING APPARATUS – AWARD OF CONTRACT FISCAL IMPACT: The contract for services is $991,125.55. Sufficient funding is budgeted and available in the Fiscal Year 2023/24 Fire Suppression Replacement Capital Account (No. 0010260.562000.00160).
EXHIBITS:
1.City Council Resolution No. 2024- , awarding a contract for services to L.N. Curtis and Sons for the MSA Self-Contained Breathing Apparatus Project
2.Contract with L.N. Curtis and Sons
06/25/2024 C14 2 of 61
00029213 7
RESOLUTION NO. 2024-
A RESOLUTION OF THE CITY COUNCIL OF THE CHARTERED CITY OF VISTA, CALIFORNIA, AWARDING A CONTRACT FOR SERVICES TO L.N.
CURTIS AND SONS FOR THE MSA SELF-CONTAINED BREATHING
APPARATUS PROJECT
The City Council of the City of Vista does resolve as follows:
1. Findings. The City Council hereby finds and declares the following:
A. On June 27, 2023 the City Council adopted Resolution 2023-117 approving the Operating Budget for Fiscal Years 2023/24 and 2024/25.
B. The City solicited bids for the MSA Self-Contained Breathing Apparatus (SCBA) project and on June 12, 2024 public bids for SCBA were opened and L.N. Curtis and Sons was the lowest bidder.
C. Staff determined that the bid submitted by L.N. Curtis and Sons is responsive in all material aspects to the request for bids, and that the bid from L.N. Curtis and Sons for MSA Self-Contained Breathing Apparatus has been determined to be the lowest responsive, responsible bid.
2. Action.
A. The contract between the City of Vista and L.N. Curtis and Sons in the amount of $991,125.55 is approved, and the Mayor is authorized to execute the contract.
3. Adoption. PASSED AND ADOPTED at a meeting of the City Council of the City of Vista held on June 25, 2024, by the following vote:
AYES:
NOES:
ABSTAIN:
APPROVED AS TO FORM:
WALTER CHUNG, CITY ATTORNEY
By:
APPROVED
Walter C. Chung
20240618085436
JOHN B. FRANKLIN, MAYOR
ATTEST:
KATHY VALDEZ, CITY CLERK
By:
06/25/2024 C14 3 of 61
EXHIBIT 1
City Services (Non-Construction) (RFP)
1 of 10
L.N. CURTIS AND SONS
[22422-6] 00022422 8
CONTRACT FOR SERVICES
THIS “CONTRACT” is entered into by and between the “Parties” as of ___________________ (“Contract Date”).
1.0 THE “PARTIES”
The “City”:
CITY OF VISTA, a chartered municipal
corporation
200 Civic Center Drive
Vista, CA 92084
Working Contact: Robbie Ford
Billing Contact: Maia Hodge
The “Contractor”
L.N. CURTIS AND SONS, a California stock
corporation
185 Lennon Lane, Suite 110
Walnut Creek, CA 94598
Contact: Nathan Belcher
2.0 BASIC TERMS
2.1 The “Services” to be performed by Contractor are set forth in City’s Request for Proposals (“Exhibit A”).
2.2 Contractor desires to enter into this “Contract” with City for the Services.
2.3 The “Project” for which the Services are required is described in Exhibit A.
2.4 Contractor has submitted to City a Proposal to perform the Services dated June 11, 2024 (“Exhibit B”).
2.5 The “Contract Ceiling Price” is $991,125.55.
3.0 CONTRACT TERM
3.1 This Contract shall take effect as of the Contract Date.
3.2 This Contract shall be in effect for 24 calendar months (“Term”). The Term may be extended at the City’s option for an additional 36 months, in increments of City’s choice, for a maximum Term of 60 from the Contract Date.
3.3 City may terminate this Contract upon 30-days’ written notice to Contractor. In such event, or upon request of City, Contractor shall assemble all City documents in the Contractor's possession, put them in order for proper filing and closing, and deliver the documents to City. In the event of termination, Contractor shall be paid for work performed to the termination date. City shall make the final determination as to the portion of tasks completed and the compensation to be paid.
4.0 SCOPE
Contractor shall perform all Services including, labor, materials, software, supplies, reports, and documents for as may be required from time to time, in accordance with Exhibit A. The Services shall be complete, and all work, material and services not expressly called for in the 06/25/2024 C14 4 of 61
EXHIBIT 2
City Services (Non-Construction) (RFP) 2 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
Proposal which may be necessary to carry out the Contract in good faith, shall be performed by the Contractor at no increase in cost to City. In the event of a conflict between the provisions of Exhibit A and Exhibit B, the provisions of Exhibit A shall control.
5.0 COMPENSATION
5.1 City shall pay Contractor on a time and material rate as set forth in Exhibit B for the Services to be performed.
5.2 An invoice for payment shall be submitted in a form satisfactory to City. At a minimum, the invoice shall include: the purchase order number, the work order number, a description of the work performed, and a total amount.
5.3 Changes in, additions to, or deductions from the Services, including increases or decreases in the quantity of any item or portion of the Services, shall be set forth in a written change order executed by City and by the Contractor which shall specify:
5.3.1 The changes, additions, and deductions to be made.
5.3.2 The increase or decrease in compensation due the Contractor, if any.
5.3.3 Adjustment in the time of completion, if any.
5.4 Contract Ceiling Price
5.4.1 In no event shall City be liable for paying more than the Contract Ceiling Price for Contractor's services rendered under this Contract.
5.4.2 If it becomes foreseeable that Contractor will need to perform services such that the cumulative total of costs to City will exceed the maximum permitted by this Contract, any such cost overrun will be handled pursuant to the change order procedure in Chapter 3.08. City and Contractor recognize that City lacks authority to exceed the cost ceiling without the express authorization of the City Council. If the maximum cost to City for this Contract is exceeded unexpectedly, payment shall be made as mutually agreeable and disputes shall be handled pursuant to this Contract, but work shall cease as soon as is reasonably feasible once the cost ceiling plus allowable change orders, if any, is exceeded.
5.5 Except as provided in Exhibit B, Contractor shall not be reimbursed for any expenses incurred in rendering services under this Contract.
6.0 CONTRACT DOCUMENTS
The Contract comprises the following documents including all additions, deletions, modifications and appendices and all addenda setting forth any modifications or interpretations of any of these documents: Documents required under Exhibits A–E.
06/25/2024 C14 5 of 61
City Services (Non-Construction) (RFP) 3 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
7.0 TIME FOR COMPLETION AND COMMENCEMENT OF SERVICES
All Services under the Contract must be completed in compliance with the schedule in Exhibit B.
8.0 ASSISTANCE BY CITY
All information, data, records, reports, and maps as are in possession of City and necessary for the carrying out of this work shall be available to Contractor without charge. City shall make available to Contractor members of its staff for consultation with Contractor in the performance of this Contract. City does not warrant that the information data, records, reports, and maps heretofore or to be provided to Contractor are complete or accurate and Contractor should satisfy itself as to accuracy and completeness. City and Contractor agree that City shall have no liability should any information, data, records, reports, and maps be inaccurate, incomplete, or misleading. Unless provided in Exhibit A, no other assistance shall be provided by City to Contractor.
9.0 STANDARD OF PERFORMANCE
9.1 Contractor represents and warrants that it has the training, qualifications, experience, and facilities necessary to properly perform the Services required under this Contract in a thorough, competent, and professional manner. At all times Contractor shall faithfully, competently and to the best of its ability, experience, and talent, perform all services described herein. In meeting its obligations under this Contract, Contractor shall employ, at a minimum, generally accepted standards and practices utilized by persons engaged in providing services similar to those required of Contractor under this Contract.
9.2 Contractor shall keep itself informed of and comply with all applicable federal, state, and local laws, statutes, codes, ordinances, regulations, and rules in effect during the Term of this Contract. Contractor shall obtain any and all licenses, permits and authorizations necessary to perform the services set forth in this Contract, including any business licenses required by City. Neither City, nor any elected or appointed boards, officers, officials, employees, or agents of City, shall be liable, at law or in equity, as a result of any failure of Contractor to comply with this Section.
10.0 CONTRACTOR’S STATUS; CONTRACTOR’S EMPLOYEES
10.1 Contractor shall perform the services provided for herein in Contractor's own way as an independent contractor and in pursuit of Contractor's independent calling. Contractor is not to be considered an employee of City, nor shall any employees of Contractor be considered employees of City, for any purpose. Contractor shall be under the direction and control of City staff only as to the results to be accomplished. This Contract is not intended to create the relationship of partnership, joint venture, or association between City and Contractor.
10.2 Contractor represents and warrants that all design professional services, if any, shall be provided by a person or persons duly licensed by the State of California to provide the type of services described in Exhibit A.
10.3 Neither Contractor, nor any of Contractor's officers, employees, or agents, shall obtain any rights to retirement, health care or any other benefits which may otherwise accrue to 06/25/2024 C14 6 of 61
City Services (Non-Construction) (RFP) 4 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
City’s employees. Contractor expressly waives any claim Contractor may have to any such rights.
10.4 Contractor is aware of the requirements of the Immigration Reform and Control Act of 1986 and shall comply with those requirements, including, but not limited to, verifying the eligibility for employment of all of Contractor’s officers, employees, agents, and subcontractors that are included in this Contract.
10.5 The payment made to Contractor pursuant to this Contract shall be the full and complete compensation to which Contractor and Contractor’s officers, employees, agents, and subcontractors are entitled for performance of any work under this Contract. Neither Contractor nor Contractor’s officers or employees are entitled to any salary or wages, or retirement, health, leave or other fringe benefits applicable to employees of the City. City will not make any federal or state tax withholdings on behalf of Contractor. City shall not be required to pay any workers' compensation insurance on behalf of Contractor.
10.6 Contractor agrees to defend and indemnify City for any obligation, claim, suit or demand for tax, retirement contribution including any contribution to the Public Employees Retirement System (PERS), social security, salary or wages, overtime payment, or workers' compensation payment which City may be required to make on behalf of Contractor or any employee of Contractor, or any employee of Contractor construed to be an employee of City, for work done under this Contract. This is a continuing obligation that survives the termination of this Contract.
11.0 CIVIL RIGHTS
11.1 Contractor agrees to comply with Title VII of the Civil Rights Act of 1964, as amended, the California Fair Employment Practices Act, the Americans with Disabilities Act of 1990, any other applicable federal and state laws and regulations hereinafter enacted.
11.2 Contractor shall not knowingly deny an opportunity or benefit, discriminate against or harass, any employee or applicant for employment on account of the person’s race, color, ethnicity, national origin, ancestry, religion, creed, veteran status, physical disability, mental disability, medical condition, marital status, sex, sexual orientation, age, or other status protected from workplace discrimination by state or federal law.
11.3 Contractor shall not knowingly give preferential treatment to any applicant for employment on the basis of race, color, ethnicity, national origin, ancestry, religion, creed, physical disability, mental disability, medical condition, marital status, sex, or sexual orientation.
11.4 This section shall be interpreted in a manner that is consistent with the California and United States Constitutions and applicable state and federal statutes governing workplace discrimination. The terms used in this section shall have the same meaning as defined in state statutes governing the same subject matter.
11.5 Nothing in this section shall be interpreted as prohibiting bona fide occupational qualifications consistent with applicable state and federal law and reasonably necessary to the normal operation of Contractor. Nothing in this section shall be interpreted as prohibiting regulations and policies to prevent nepotism or conflicts of interest.
06/25/2024 C14 7 of 61
City Services (Non-Construction) (RFP) 5 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
11.6 Nothing in this Section shall be interpreted as prohibiting action taken to establish or maintain eligibility for any federal program, where ineligibility would result in a loss of federal funds to City.
11.7 To the fullest extent permitted by law and without limitation by the other provisions of this Contract relating to indemnification and insurance, Contractor shall also indemnify, defend and hold harmless City, and its directors, officers, employees and agents from and against all liability (including without limitation all claims, damages, penalties, fines, and judgments, associated investigation and administrative expenses, and defense costs, including but not limited to reasonable attorneys' fees, court costs, and costs of alternative dispute resolution) resulting from any claim of discrimination or harassment, including but not limited to sexual harassment, arising from the conduct of the Contractor or any of the Contractor’s officers, employees, agents, licensees, or subcontractors. In the event of a discrimination or harassment complaint against any employee, agent, licensee or subcontractors of Contractor or its subcontractors, Contractor shall take immediate and appropriate action in response to such complaint, including, but not limited to termination or appropriate discipline of any responsible employee, agent, licensee or subcontractors. The provisions of this Section survive completion of the services or termination of the Contract.
12.0 CONTROL OF SERVICES
Each Party shall appoint a representative who shall have the authority to represent and act for that Party (“Representative”). Any written or verbal directions or requests of City's Representative delivered to the Contractor’s Representative shall have the same force and effect as if delivered to the Contractor. The Contractor's Representative shall have the authority to sign any change order, coordinate the work of all subcontractors and make other decisions pertaining to the Contract.
13.0 ASSIGNMENT AND SUBCONTRACTING
13.1 Neither this Contract nor any interest herein may be transferred, assigned, conveyed, hypothecated, or encumbered voluntarily or by operation of law, whether for the benefit of creditors or otherwise, without the prior written approval of the City. Transfers restricted hereunder shall include the transfer to any person or group of persons acting in concert of more than twenty-five percent (25%) of the present ownership and/or control of Contractor, taking all transfers into account on a cumulative basis. In the event of any such unapproved transfer, including any bankruptcy proceeding, this Contract shall be void. No approved transfer shall release the Contractor or any surety of Contractor of any liability hereunder without the express consent of City.
13.2 Contractor shall be fully responsible to the City for any acts and omissions of Contractor's subcontractor, including persons either directly or indirectly employed by subcontractor, in the event Contractor subcontracts any of the work to be performed under this contract. Contractor's responsibility under this paragraph shall be identical to Contractor's liability for acts and omissions of Contractor and employees of the Contractor. Nothing contained in this Contract shall create any contractual relationship between City and any subcontractor of Contractor, but Contractor shall bind every subcontractor and every subcontractor of a subcontractor by the terms of this contract applicable to Contractor's work, unless such change, omission, or addition is approved in advance in writing by the City Manager or the City Manager’s designee. All subcontractors are subject to the prior written review and approval of the City Manager or the City Manager’s designee. 06/25/2024 C14 8 of 61
City Services (Non-Construction) (RFP) 6 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
14.0 LICENSES
If a license of any kind, which term is intended to include evidence of registration, is required of Contractor, its employees, agents, or subcontractors by federal, state, or local law, Contractor warrants that such license has been obtained, is valid and in good standing, and that any required bond has been posted in accordance with all applicable laws and regulations.
15.0 FINANCIAL RECORDS
15.1 Contractor shall maintain any and all documents, ledgers, books of account, invoices, vouchers, canceled checks, or records demonstrating or relating to Contractor’s performance of services pursuant to this Contract or evidencing or relating to expenditures and disbursements charged to City pursuant to this Contract. Any and all such documents or records shall be maintained in accordance with generally accepted accounting principles and shall be sufficiently complete and detailed so as to permit an accurate evaluation of the services provided by Contractor pursuant to this Contract. Any and all such documents or records shall be maintained for three years from the date of execution of this Contract and to the extent required by laws relating to audits of public agencies and their expenditures. It is expressly understood and agreed that the provisions of this Section will survive termination of this Contract.
15.2 Any and all records or documents required to be maintained pursuant to this Section shall be made available for inspection, audit and copying, at any time during regular business hours, upon request by City or its Representative. Copies of such documents or records shall be provided directly to the City for inspection, audit and copying when it is practical to do so; otherwise, unless an alternative is mutually agreed upon, such documents and records shall be made available at Contractor's address indicated for receipt of notices in this Contract or the primary location from which services are rendered, whichever is closer.
16.0 OWNERSHIP OF DOCUMENTS
16.1 Upon delivery, the work product, including without limitation, all original reports, writings, recordings, drawings, files, computer code, and detailed calculations developed under this contract, are the property of City. Contractor agrees that all copyrights which arise from creation of the work pursuant to this contract shall be vested in City and hereby assigns, waives, and relinquishes all claims to copyright or other intellectual property rights in favor of City. City acknowledges that its use of the work product is limited to the purposes contemplated by the scope of Services and that Contractor makes no representation of the suitability of the work product for use in or application to circumstances not contemplated by the scope of Services. If Contractor is providing copyrighted, proprietary materials in the performance of the Services, then the intellectual property provisions of Exhibit B shall prevail over the provisions of this section.
16.2 Contractor represents that it has secured all necessary licenses, consents, or approvals to use the components of any intellectual property, including computer software, used in the rendering of services and the production of the work product produced under this Contract, and that City has full legal title to and the right to reproduce such materials. The Contractor covenants to defend, indemnify and hold City harmless of any loss, claim or liability in any way related to a claim that they are violating or have violated any federal, state or local laws, or any contractual provisions, relating to trade names, licenses, franchises, patents or 06/25/2024 C14 9 of 61
City Services (Non-Construction) (RFP) 7 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
other means of protecting interests in products or inventions. Contractor shall bear all costs arising from the use of patented, copyrighted, trade secret or trademarked materials, equipment, devices, or processes used on or incorporated in the services and materials produced under this Contract. In case such materials, equipment, devices, or processes are held to constitute an infringement and their use is enjoined, Contractor, at its expense, shall: (a) secure for City the right to continue using the materials by suspension of any injunction or by procuring a license or licenses for the City; or (b) modify the materials so that they become non-infringing.
17.0 CONFIDENTIALITY
17.1 Contractor shall treat all information obtained from City in the performance of this Contract as confidential and proprietary to City. Contractor shall treat all records and work product prepared or maintained by Contractor in the performance of this Contract as confidential.
17.2 Contractor agrees that it will not use any information obtained as a consequence of the performance of work for any purpose other than fulfillment of Contractor’s scope of Services. Contractor will not disclose any information prepared for City or obtained from City or obtained as a consequence of the performance of work to any person other than City, or its own employees, agents or subcontractors who have a need for the information for the performance of Services under this Contract unless such disclosure is specifically authorized in writing by City.
18.0 CONFLICT OF INTEREST REQUIREMENT
Contractor agrees that, to the extent applicable, it shall comply with and be bound by all laws and regulations deriving from the relationship of the Contractor to the City, including the Political Reform Act (Government Codes Section 87100 et seq.) Chapters 2.32 or 2.33 of the Vista Municipal Code, the Community Redevelopment Act (Health & Safety Code 33000 et seq.) and all regulations promulgated thereunder (collectively “Conflict Laws”). As a condition precedent to the formation of this Contract, Contractor warrants and covenants that it is adequately informed regarding the obligations and duties imposed by the Conflict Laws and that to the best of Contractor's knowledge and belief, there exists no conflict of interest (under the laws) that would disqualify the Contractor from participation in any decisions arising out of the performance of this Contract. Prior to commencement of any work in the performance of this Contract, Contractor shall comply with any applicable requirements of Chapter 2.32 of the Vista Municipal Code, including any requirement to file a financial disclosure statement with the City Clerk.
Contractor further agrees that no employee, agent or subcontractor for Contractor shall perform any work for the City pursuant to this Contract which will violate the Conflict Laws.
19.0 PROHIBITION OF FINANCIAL INTEREST BY CITY OFFICIAL Contractor warrants and covenants to City that no City Official has or will have any current or future financial interest in this Contract as of the date approved, nor shall Contractor promise, offer, or enter into any written, oral or implied Contract, to provide any financial interest or remuneration of any kind or manner to any City official with respect to this Contract. For purposes of this Section, the term “City Official” shall mean and include any elected or appointed officer of City, any employee of City, or any spouse or financial dependent of a City official or employee. A violation of this provision shall render this Contract null and void and Contractor shall be subject to restitution of all fees or money paid or earned under this Contract.
06/25/2024 C14 10 of 61
City Services (Non-Construction) (RFP) 8 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
20.0 INDEMNIFICATION
20.1 Contractor shall defend, indemnify and hold City and its officers, officials, employees, and volunteers (collectively, “Indemnitees”) harmless against any and all liability, loss, damage, fine, penalty, expense, claim or cost (including without limitation costs and fees of litigation) of every nature (collectively, “Liability”) arising out of or in connection with this Contract or its performance, including defects in design, except: (1) Liability caused by Indemnitees’ sole negligence or willful misconduct; or (2) for Liability caused by Indemnitees’ active negligence, in which case the indemnity received by Indemnitees shall be reduced by the amount: (i) that Indemnitees’ active negligence contributed to the Liability on a comparative basis; or (ii) such other amount as may be required by law (“Duty of Indemnification”).
20.2 Contractor, on behalf of itself and all parties claiming under or through it, hereby waives all rights of subrogation and contribution against Indemnitees, while acting within the scope of their duties, from all claims, losses and liabilities arising out of or incident to activities or operations performed by or on behalf of the Contractor regardless of any prior, concurrent, or subsequent active or passive negligence by the Indemnitees. In the event there is more than one person or entity named in the Agreement as a Contractor, then all obligations, liabilities, covenants, and conditions under this instrument shall be joint and several.
21.0 INSURANCE AND BONDS
Contractor shall comply with the insurance provisions set forth in Exhibit C.
22.0 SERVICE OF NOTICE
22.1 Any notice, which either Party may desire to give to the other Party, must be in writing and may be given by personal delivery to the Party’s Representative or by overnight courier service to the Party’s address set forth in Section 1.0. Notice may also be given by mailing it by registered or certified mail, return receipt requested, to the other Party at the address set forth in Section 1.0. Any notice given by mail will be deemed given 48 hours after such notice is deposited in the United States mail, addressed as provided with postage fully prepaid.
22.2 A Party may change its address by giving notice as provided above, and the changed address shall thereafter be deemed to be the address set forth in Section 1.0.
23.0 LABOR LAW COMPLIANCE
California Labor Code Sections 1860 and 3700 provide that every contractor will be required to secure the payment of compensation to its employees. In accordance with the provisions of California Labor Code Section 1861, Contractor hereby certifies as follows:
“I am aware of the provisions of Section 3700 of the Labor Code which require every employer to be insured against liability for worker’s compensation or to undertake self- insurance in accordance with the provisions of that code, and I will comply with such provisions before commencing the performance of the work of this contract.”
24.0 SURVIVAL OF COVENANTS
Contractor’s obligations under Sections 16, 17 and 20 shall survive the termination of this Contract.
06/25/2024 C14 11 of 61
City Services (Non-Construction) (RFP) 9 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
25.0 SPECIAL PROVISIONS
This Contract is subject to, and Contractor shall comply with, the special provisions referenced in Exhibit E, if any.
26.0 EXHIBITS
All documents referenced as exhibits in this Contract, or referenced in an exhibit to this Contract, are incorporated herein.
27.0 APPLICABLE LAW, VENUE
This Contract shall be construed and enforced under the laws of the State of California. If any action is commenced by any Party to this Contract, such action shall be filed in a court of competent jurisdiction within the County of San Diego, California.
28.0 COUNTERPARTS; ELECTRONIC SIGNATURES; ELECTRONIC DELIVERY This Agreement may be executed in separate counterparts, none of which need contain the signatures of both Parties, and each of which, when so executed, shall be deemed an original and all together shall constitute and be one of the same instrument. The Parties agree that this Agreement, whether executed by electronic signature, digital signature, or constituting a scanned or electronically reproduced copy or image of this Agreement bearing the signatures of the Parties, will be deemed an original and will represent competent evidence of the execution, terms and existence of this Agreement notwithstanding the failure or inability to produce an original executed Agreement or counterpart thereof, and without the requirement that the unavailability of such original executed Agreement or counterpart thereof first be proven.
Further, the exchange of this entire executed Agreement (and/or such exhibit(s) or document(s)) that is in photostatic or portable document format (.pdf) form by electronic mail or by another electronic means shall be considered original(s) and shall constitute effective execution and delivery of the original(s).
29.0 MODIFICATIONS
This Contract contains the entire agreement, between the Parties and supersedes all prior negotiations, discussions, obligations, and rights of the Parties in respect of each other regarding the subject matter of this Contract. There is no other written or oral understanding between the Parties. No modification, amendment, or alteration of this Contract shall be valid unless it is in writing and signed by all Parties.
[Continued on page 10.]
06/25/2024 C14 12 of 61
City Services (Non-Construction) (RFP) 10 of 10 L.N. CURTIS AND SONS [22422-6] 00022422 8
30.0 EXECUTION
IN WITNESS WHEREOF; the Parties hereto have executed this Contract as of the Contract Date.
“City”
CITY OF VISTA, a chartered municipal
corporation
By:
JOHN B. FRANKLIN, MAYOR
ATTEST:
KATHY VALDEZ, CITY CLERK
By:
APPROVED AS TO FORM:
WALTER CHUNG, CITY ATTORNEY
By:
RISK MANAGEMENT REVIEW:
DOLORES GASCON, RISK MANAGER
By:
“Contractor”
L.N. CURTIS AND SONS, a California stock
corporation
By:
Name/Title
By:
Name/Title
APPROVED
Beverly Roxas
20240617095416
06/25/2024 C14 13 of 61
00022422 8 Exhibit A
EXHIBIT A
REQUEST FOR PROPOSALS
06/25/2024 C14 14 of 61
00022422 8 Exhibit B
EXHIBIT B
CONTRACTOR’S PROPOSAL
06/25/2024 C14 15 of 61
00022422 8 Exhibit C, Page 1 of 3
EXHIBIT C
INSURANCE REQUIREMENTS
Contractor shall procure and maintain for the duration of the contract insurance against claims for injuries to persons or damages to property which may arise from or in connection with the performance of the work hereunder by the Contractor, his agents, representatives, employees, or subcontractors. Nothing in these provisions shall limit Contractor’s Duty of Indemnification.
MINIMUM SCOPE AND LIMIT OF INSURANCE
Coverage shall be at least as broad as:
1. Commercial General Liability (“CGL”): Insurance Services Office Form CG 00 01 covering CGL on an “occurrence” basis, including products, completed operations, property damage, bodily injury, and personal & advertising injury with limits no less than $2,000,000 per occurrence. If a general aggregate limit applies, either the general aggregate limit shall apply separately to this Project/location or the general aggregate limit shall be twice the required occurrence limit.
2. Automobile Liability: Insurance Services Office Form Number CA 0001 covering Code 1 (any auto), with limits no less than $2,000,000 per accident for bodily injury and property damage.
3. Workers’ Compensation insurance as required by the State of California, with Statutory Limits, and Employers’ Liability insurance with a limit of no less than $1,000,000 per accident for bodily injury or disease.
Contractor shall also provide the additional coverages checked below and at least as broad as:
4. Professional Liability, with limits no less than $1,000,000 per occurrence or claim, and $2,000,000 policy aggregate.
If the Contractor maintains higher limits than the minimums shown above, City requires and shall be entitled to coverage for the higher limits maintained by the Contractor. Any available insurance proceeds in excess of the specified minimum limits of insurance and coverage shall be available to City.
Deductibles and Self-Insured Retentions
Any deductibles or self-insured retentions must be declared to and approved by City. At the option of City, either: the Contractor shall cause the insurer to reduce or eliminate such deductibles or self-insured retentions as respects City, its officers, officials, employees, and volunteers; or the Contractor shall provide a financial guarantee satisfactory to City guaranteeing payment of losses and related investigations, claim administration, and defense expenses.
Other Insurance Provisions
The insurance policies are to contain, or be endorsed to contain, the following provisions:
1. The City, its officers, officials, employees, and volunteers are to be covered as additional insureds on the CGL policy with respect to liability arising out of with respect 06/25/2024 C14 16 of 61
00022422 8 Exhibit C, Page 2 of 3
to liability arising out of work or operations performed by or on behalf of the Contractor including materials, parts, or equipment furnished in connection with such work or operations and automobiles owned, leased, hired, or borrowed by or on behalf of the Contractor. General liability coverage can be provided in the form of an endorsement to the Contractor’s insurance (at least as broad as ISO Form CG 20 10, CG 11 85 or both CG 20 10 and CG 20 37 forms if later revisions used), unless otherwise approved in advance by City.
2. For any claims related to this Project, the Contractor’s insurance coverage shall be primary insurance as respects City, its officers, officials, employees, and volunteers.
Any insurance or self-insurance maintained by City, its officers, officials, employees, and volunteers shall be excess of the Contractor’s insurance and shall not contribute with it.
3. Each insurance policy required by this clause shall provide that coverage shall not be canceled, except with notice to City.
Claims Made Policies
If any coverage required is written on a claims-made coverage form:
1. The retroactive date must be shown, and this date must be before the execution date of the contract or the beginning of contract work.
2. Insurance must be maintained and evidence of insurance must be provided for at least five (5) years after completion of contract work.
3. If coverage is canceled or non-renewed, and not replaced with another claims-made policy form with a retroactive date prior to the contract effective, or start of work date, the Contractor must purchase extended reporting period coverage for a minimum of five (5) years after completion of contract work.
4. A copy of the claims reporting requirements must be submitted to City for review.
Acceptability of Insurers
Insurance is to be placed with insurers with a current A.M. Best rating of no less than A: VII, unless otherwise acceptable to City.
Waiver of Subrogation
Contractor hereby agrees to waive rights of subrogation which any insurer of Contractor may acquire from Contractor by virtue of the payment of any loss. Contractor agrees to obtain any endorsement that may be necessary to affect this waiver of subrogation. The Workers’ Compensation policy shall be endorsed with a waiver of subrogation in favor of City for all work performed by the Contractor, its employees, agents and subcontractors.
Verification of Coverage
Contractor shall furnish City with original certificates and amendatory endorsements, or copies of the applicable insurance language, effecting coverage required by this contract. All certificates and endorsements are to be received and approved by City before work commences. However, failure to obtain the required documents prior to the work beginning shall not waive the Contractor’s obligation to provide them. City reserves the right to require 06/25/2024 C14 17 of 61
00022422 8 Exhibit C, Page 3 of 3
complete, certified copies of all required insurance policies, including endorsements, required by these specifications, at any time.
Subcontractors
Contractor shall require and verify that all subcontractors maintain insurance meeting all the requirements stated herein, and Contractor shall ensure that City is an additional insured on insurance required from subcontractors. For CGL coverage, subcontractors shall provide coverage with a format least as broad as CG 20 38 04 13.
Special Risks or Circumstances
City reserves the right to modify these requirements, including limits, based on the nature of the risk, prior experience, insurer, coverage, or other circumstances.
06/25/2024 C14 18 of 61
00022422 8 Exhibit D
AGREEMENT TO COMPLY WITH CALIFORNIA LABOR LAW REQUIREMENTS [Labor Code §§ 1720, 1771.1, 1773.8, 1775, 1776, 1777.5, 1813, 1860, 1861, 3700
NOT APPLICABLE TO THIS CONTRACT
06/25/2024 C14 19 of 61
00022422 8 Exhibit E
EXHIBIT E
SPECIAL PROVISIONS
This Contract is subject to the following provisions, if checked:
1. State of California grant conditions, as attached.
2. Federal grant conditions, as attached.
3. Other conditions, as attached.
06/25/2024 C14 20 of 61
City of Vista
Fire
Roy Palmer, Fire Chief
200 Civic Center Drive, Vista, CA 92084
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
RESPONSE DEADLINE: June 12, 2024 at 5:00 pm
Report Generated: Thursday, June 13, 2024
L. N. Curtis & sons Response
CONTACT INFORMATION
Company:
L. N. Curtis & sons
Email:
[email protected]
Contact:
Nathan Belcher
Address:
185 Lennon Lane
Suite 110
Walnut Creek, CA 94598
Phone:
N/A
Website:
N/A
Submission Date:
Jun 11, 2024 3:46 PM
06/25/2024 C14 21 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
ADDENDA CONFIRMATION
Addendum #1
Confirmed Jun 11, 2024 1:26 PM by Nathan Belcher
QUESTIONNAIRE
1. Have you read the entire solicitation and agree to all Terms and Conditions herein?* Yes
2. Please provide any additional information you would like the City to consider.
Cover_Letter.pdf
3. Description of Bidder’s qualifications, not to exceed one single spaced page.* Please upload
Description of Bidder’s qualifications, not to exceed one single spaced page.
03_Statement.pdf
4. Delivery Schedule *
Please provide Delivery Schedule for each item on Fee Schedule.
120-days
5. Warranty *
Description of Bidder’s or manufacturer’s warranty terms for each item on Fee Schedule. 06/25/2024 C14 22 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
OR
Complete copy of Bidder’s or manufacturer’s warranty for each item on Fee Schedule.
MSA_G1_SCBA_Warranty_10162874.pdf
True_North-_L3_RIT_Bag.pdf
6. Technical Specifications*
Manufacturer’s technical specifications sheet for each item on Fee Schedule. 0105-169-MC_MSA_G1-SCBA_Bulletin.pdf
0119-33-MC_G1-Integrated-TIC-Bulletin.pdf
0105-210-MC_MSA_G1_Rechargeable_Battery_Introductory_Flyer.pdf
7. Orientation and Training.*
Please describe transition, orientation, and training of new SCBA system. 03_Statement.pdf
PRICE TABLES
MSA SCBA WITH SPECIFIED COMPONENTS
Line Item Description Quantity Unit of
Measure
Unit Cost Total
1 Configured MSA G1 SCBA 100 lump sum $6,470.60 $647,060.00 TOTAL $647,060.00
CYLINDERS
06/25/2024 C14 23 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
SCBA Cylinders
Line Item Description Quantity Unit of
Measure
Unit Cost Total
2 30Min 4500# MSA G1 SCBA Cylinder, with air, with Quick Connect Remote Connection (Custom Cylinder with Vista Fire Department logo) 202 lump $926.56 $187,165.12
TOTAL $187,165.12
SCBA MASKS
Line Item Description Quantity Unit of
Measure
Unit Cost Total
3 Small MSA G1 Facepiece with Small Nosecup 12 lump $270.00 $3,240.00 4 Medium MSA G1 Facepiece with Medium Nosecup 98 lump $270.00 $26,460.00 5 Large MSA G1 Facepiece with Large Nosecup 12 lump $270.00 $3,240.00 6 4-Point Adjustable Cloth Head Harness 122 lump $0.00 $0.00 7 Fixed Push-To-Connect Regulator Connection 122 lump $0.00 $0.00 TOTAL $32,940.00
RIT SYSTEM
Line Item Description Quantity Unit of
Measure
Unit Cost Total
8 60Min 4500# MSA G1 SCBA Cylinder, With Air, With Quick Connect Remote Connection (Custom Cylinder With Vista Fire Department logo) 14 lump $1,343.73 $18,812.22
06/25/2024 C14 24 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
Line Item Description Quantity Unit of
Measure
Unit Cost Total
9 RBL303 True North Red L-3 Speed Rit Bag 14 lump $253.86 $3,554.04 10 Uebss 2018 Edition MSA G1 Rit Extendaire II System, 4500#, Medium Facepiece, Regulator, 6Ft Quick-Fill Hose, Urc, Quick-Connect
14 lump $4,536.31 $63,508.34
TOTAL $85,874.60
SCBA ACCESSORIES
Line Item Description Quantity Unit of
Measure
Unit Cost Total
11 Battery Pack, MSA 10148741-SP G1, Rechargeable 30 Lump $383.15 $11,494.50 12 SCBA Charging Station Kit, MSA 10158385 G1 8 Lump $742.37 $5,938.96 13 4500/5500 Quick Connect Coupling, MSA 10149700-SP 12 Lump $439.95 $5,279.40 14 Blue Spartan MSA Female x 1/4NPT to Connect to MSA Adapter, MSAQC-FGA 12 Lump $54.75 $657.00 15 Blue Spartan Copper Washer, 96-347-1SS-MSAQC-CW 12 Lump $2.11 $25.32 16 Tag Assy, Electronic Id, M7, MSA 10083875 115 Lump $43.27 $4,976.05 17 RFID Contactless Reader Writer, 13.56 Mh, MSA 10186214 2 Lump $582.95 $1,165.90 18 RFID Reader/Writer Kit, MSA G1 10158407 1 Lump $708.84 $708.84 06/25/2024 C14 25 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
Line Item Description Quantity Unit of
Measure
Unit Cost Total
19 Repair Tools Kit, Custom, Consisting of 1-each of the following: 10149560 Torque Tool (G1 Facepiece), 10164592 Socket Hex 8pt Deepwell (44mm x 3/8 drive), 10164593 Crowfoot 46mm x 3/8 drive, 10164594 CS Torque Cable Key, 10164595 CS Torque Screwdriver, and 10164596 Tool (activator adjustment and alarm G1) 1 Lump $1,741.32 $1,741.32
20 Filter Adapter Assy Kit, G1, Facepiece, MSA 10144231-SP 5 Lump $116.32 $581.60 TOTAL $32,568.89
TRAINING
MSA certified G1 Technician CARE software and training
Line Item Description Quantity Unit of
Measure
Unit Cost Total
22 SCBA Testsoftware Posi 3 USB CD-ROM, MSA 10110435 1 Lump $1,159.05 $1,159.05 23 MSA ZT-G1CARE-12HR G1 Technician CARE Class for Vista Fire Department personnel providing MSA certification
3 Lump $1,452.63 $4,357.89
TOTAL $5,516.94
WARRANTY
06/25/2024 C14 26 of 61
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
RFB No. TBD
MSA Self-Contained Breathing Apparatus
[L. N. CURTIS & SONS] RESPONSE DOCUMENT REPORT
Request for Bids - MSA Self-Contained Breathing Apparatus
Line Item Description Quantity Unit of
Measure
Unit Cost Total
25 The successful bidder shall fully warrant all materials, equipment, including and without limitation, any optional equipment purchased by the City under the terms of this Notice Inviting Bids, against poor and inferior quality equipment and materials, for the full term of this contract from the date of the final acceptance by the City. While under warranty, the successful bidder shall repair or replace inoperable equipment or material in a timely manner to minimize the disruption of Department operations. There shall be no additional costs for items replaced due to poor and inferior quality or defects.
1 Lump $0.00 $0.00
TOTAL $0.00
DELIVERY
Line Item Description Quantity Unit of
Measure
Unit Cost Total
26 All deliveries and services shall be made between the hours of 8:00 a.m. and 5:00 p.m. local time, Monday through Friday, excluding City holidays, to the location below: Vista Fire Station 1 175 North Melrose Drive Vista, CA 92083 1 Lump $0.00 $0.00
TOTAL $0.00
06/25/2024 C14 27 of 61
185 Lennon Lane, Suite 110 | Walnut Creek, CA 94598 | Phone 510.839.5111 | Fax 510.839.0219 LNCurtis.COM
6/11/2024
Vista City Purchasing
Subject: RFP for MSA Self-Contained Breathing Apparatus In response to the City of Vista Request for Purchase of MSA Self-Contained Breathing Apparatus (SCBA) systems and accessories, our company acknowledges and fully understands the outlined objectives. The City of Vista is seeking a qualified vendor to supply the latest NFPA compliant SCBA and accessories with a focus on high quality, technological advancement, long-term performance, and cost-effectiveness.
Our commitment aligns seamlessly with City of Vista's vision of awarding a master agreement to a vendor proposing a comprehensive SCBA system that not only complies with NFPA standards but also addresses City of Vista 's specific operational needs. Our proposed SCBA systems are engineered for durability, with advanced technology, and require minimal maintenance, ensuring optimal performance over the equipment’s lifespan.
Our company meets the minimum qualifications set forth by City of Vista, being authorized to sell and service the MSA Safety brand of SCBAs and boasting nearly 100 years of operational experience; Curtis Tools for Heroes is prepared to take on the responsibility of delivering SCBA units, parts, supplies, accessories, and user trainings throughout the agreement timeline and beyond. The Curtis Commitment extends far beyond product delivery; we will continue our long-term partnership with City of Vista throughout the deployment process, offering training and equipment configuration support as needed.
The MSA G1 SCBA meets the specifications outlined by City of Vista and is compliant to NIOSH and NFPA standards.
Our company is equipped to receive orders and fulfill them promptly by offering City of Vista the flexibility of order placement through multiple channels, including phone, email, and online ordering.
Clarification for SCBA Masks, line 6-7:
Line 6 is included with the requested masks. If additional harnesses are needed the unit price is $130.00
Line 7 is included on the SCBA unit and is not removable per Vista specifications. If additional second stage regulator assemblies are needed the unit price is $1,141.26.
In conclusion, our company is well positioned to exceed City of Vista 's requirements, delivering a comprehensive and high-quality SCBA solution that aligns with the specified objectives. We look forward to the opportunity to contribute to City of Vista 's safety and operational goals.
Sincerely,
Nathan Belcher | [email protected] | 510-268-3303
06/25/2024 C14 28 of 61
Proposal for City of Vista RFP for MSA SCBA
Curtis - Tools for Heroes®
STATEMENT OF COMMITMENT
Prior to Delivery of MSA G1 SCBA’s. Curtis will visit Vista Fire Department (VFD) and answer product questions and provide MSA G1 mask fit testing.
- Fit test all available fire fighters (using an OHD fit tester) and provide the VFD with a report of MSA G1 Mask size and “fit factor score”.
- Answer questions about G1 design and features.
Upon delivery of MSA SCBA, LNCS Sale Representative and Product Specialists will:
- LNCS will assist received inventory items and cross
reference with packing slip and order forms.
- LNCS will help unpack, assemble, and test each SCBA for functionality. - LNCS will help sort and organize equipment for distribution. - Train all available Fire Department members on the design and use of the MSA G1 SCBA.
- Discuss Daily, Monthly, yearly operational inspections. - Lead/Guide participating firefighting personnel on a “use and applications drill”.
Continued Support will be provided by LNCS’s real-time
Customer Service and Product Support Teams.
- All LNCS service technicians hold current factory repair certification on MSA SCBA products.
- LNCS technicians are recertified each year to provide current knowledge and advanced education.
- LNCS Service Technicians will complete all MSA level I and II warranty repairs on a mobile basis or at the LNCS’ Salt Lake Service & Operations Center.
- LNCS’ Salt Lake Service & Operations Center stocks
commonly used repair and maintenance parts.
- Twenty (20) L.N. Curtis & sons service technicians are available to reinforce locally available service technicians and quickly respond to unforeseen needs or disaster-recovery type operations.
06/25/2024 C14 29 of 61
MSA –The Safety Company
Limited Warranty and Terms of Sale
Express Warranty — MSA - The Safety Company (MSA) warrants MSA G1 SCBA (SCBA) to be free from defects in materials and/or faulty workmanship for a period of fifteen (15) years from the date of sale by MSA. This warranty applies to all components* of the SCBA including all accessories and optional equipment purchased and supplied at the time of the original sale. MSA’s obligation under this warranty is limited to the repair or replacement, at MSA’s option, of the SCBA or components shown to be defective in either workmanship or materials.
No agent, employee or representative of MSA may bind MSA to any affirmation, representation or modification of the warranty concerning the goods sold under this contract.
MSA shall be released from all obligations under this warranty in the event that repairs or modifications are made by persons other than its own or authorized service personnel, or if the warranty claim results from accident, alteration, misuse, or abuse. *This warranty expressly excludes the G1 SCBA Integrated Thermal Imaging Camera.
For warranty information regarding the G1 SCBA Integrated Thermal Imaging Camera please see the G1 SCBA Integrated Thermal Imaging Camera Warranty.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTEES, EXPRESSED, IMPLIED, OR
STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN ADDITION, MSA
EXPRESSLY DISCLAIMS ANY LIABILITY FOR ECONOMIC, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES IN ANY WAY CONNECTED WITH THE SALE OR USE OF MSA PRODUCTS, INCLUDING, BUT NOT LIMITED TO, LOSS OF ANTICIPATED PROFITS. 4111 Rev 0 10162874
ID 0105-176-MC/Aug 2017
© MSA 2015 Printed in U.S.A.
MSA G1 SCBA
MSA –The Safety Company
1000 Cranberry Woods Drive
Cranberry Township, PA 16066
Phone 724-776-8600
www.MSAFire.com
Fire Service Customer Service Center
Phone 1-877-MSA-FIRE
Fax 1-800-967-0398
MSA Canada
Phone 1-800-672-2222
Fax 1-800-967-0398
MSA Mexico
Phone 01 800 672 7222
Fax 52-44 2227 3943
MSA International
Phone 724-776-8626
Toll-Free 1-800-672-7777
Fax 724-741-1553
06/25/2024 C14 30 of 61
06/25/2024 C14 31 of 61
MSA G1 SCBA
06/25/2024 C14 32 of 61
2 MSA G1 SCBA
MSAfi r e .com
We are committed to you.
Working closely with fi refi ghters and rescue teams for over 100 years, MSA’s premier focus continues to be the fi re service for product innovations, improvements and service. From our Cairns® Fire Helmets, Evolution® Series Thermal Imaging Cameras and breakthrough ALTAIR® Gas Detectors, to the most advanced, safety driven breathing apparatus we’ve ever produced, the G1 SCBA, you can rely upon MSA to off er the very best in personal protective equipment. Your options in gas detection instruments and fall protection/rescue systems are more numerous and better than ever. Our MSA-U® Training Center online training tool provides in-depth product training with team-tracking capability that allows 24/7 instruction for your entire squad. And now Globe, the world’s leading maker of innovative protective clothing for fi refi ghters, is part of MSA.
Equipping fi refi ghters with the highest level of protection – head to toe, Cairns helmet to Globe boots – no one is as committed to your health and safety as we are.
Our people set us apart from the competition.
MSA’s SCBA are manufactured at our award-winning Murrysville, PA facility. Whether your needs include the revolutionary G1 SCBA, an Evolution® TIC from our Cranberry, PA plant or a Cairns® Helmet made in Jacksonville, NC, you can be sure that each of them has been made with the dedicated care and skill of an MSA associate whose average time on the job of 18 years means consistent quality, time after time.
Assistance is everywhere.
Your personalized service starts locally with your trained MSA-authorized distributor and MSA’s fi re service fi eld sales managers.
To locate your nearest MSA fi re service distributor, or fi nd an answer to an urgent technical question, our award winning, dedicated team of customer service professionals is ready to help, as they understand your hazards as well as regulatory compliance.
Contact them at 1-877-MSA-FIRE or visit us at www.MSAFIRE.com .
Fire Service
Equipment
Products for today that drive the future.
As your emergency responder duties expand, as well as
your exposure to hazards, MSA continues to provide more emergency response products to exceed your expectations and requirements. MSA supports fi refi ghters and recognizes your role as the front line of protecting others. We are constantly improving products that you have come to rely upon as the best in the industry, to make your job safer and easier. For your protection, you can count on MSA for the most technologically advanced products, and for the best support and training assistance.
06/25/2024 C14 33 of 61
3 MSA G1 SCBA iTIC
Find the Hot Spots. And the Heartbeats.
MSA provides personal thermal imaging to every fi refi ghter—from 360 to rescue; egress to overhaul.
The FIRST and ONLY TIC Integrated Directly into the SCBA. • No additional bulky equipment added to your facepiece or hanging from your gear • Compatible with all G1 SCBA via simple fi eld upgrade • Powered by the G1 SCBA’s single integrated power source – never check multiple battery locations again • Single button functionality allows for simple, intuitive use Take Advantage of the Latest Technology.
• Lightweight—only adds 4.2 oz. compared to standard MSA G1 Control Module • Up to fi ve user-selectable palettes – 10+ additional palettes available via MSA A2 Software • 220 x 176 resolution ensures crystal clear images
• Compliant to the 2018 version of the NFPA 1981 and 1982 standards • A full fi ve-year warranty on thermal imager. Additional 15 years extended warranties available. 06/25/2024 C14 34 of 61
4 MSA G1 SCBA
MSAfire.com
Facepiece
• Open port design with cross-contamination protection
• Comfortable and easy to use, with low breathing resistance on and off air • Zero electronics, reducing weight, snag hazards and cost Control
• Integrated Thermal Imaging Camera (TIC) allows firefighter to see within dark, smoke-filled environments
• Five user-selectable palettes – 10+ additional programmable palettes available via MSA A2 Software
• Compatible with all G1 SCBA via simple field upgrade
• Control module provides both color LCD and analog displays • Display automatically turns on when control module is lifted into viewing position
• No matter which button is pressed, necessary information displays • Improved visibility through buddy lights
Situational Awareness
• Wide field of view through the G1 Facepiece
• Seven three-stage buddy lights providing 360-degree visibility of pressure status
• Highly reflective material on shoulder straps and cylinder band • Optional integrated TIC provides visibility when it is needed most Information
• HUD provides more information than ever before and can be customized to meet your SOP; cylinder pressure, battery status, evacuation (optional), and so much more
Communications
• Loud and clear communications are included with every G1 SCBA • Intelligently removes background and inhalation noise, helping your commands to be heard
The MSA G1 SCBA
stands out from
the crowd.
1 2
3 4
5 5
3 1
4 2
06/25/2024 C14 35 of 61
5 Comfort
• Swiveling, adjustable lumbar pad properly positions SCBA weight • Improved comfort, balance, fit
Power
• Single power source
• Uses alkaline or rechargeable battery
• Eliminates the need to maintain multiple battery sizes or multiple battery locations
• Low cost of ownership
Ready for the Future
• Bluetooth connectivity, RFID, Near Field Communication (NFC), long-range radio
• Quickly update the G1 SCBA with the latest advancements through Bluetooth technology, ensuring the SCBA you buy today can easily adapt to meet your needs far into the future
Built Just for You
• Control module and HUD display required information; easily customized to meet your existing standard operating procedure • Modular designs allows for quick component change
6 7
8 9
6 3
7 06/25/2024 C14 36 of 61
6MSAfire.com
About FACE
The G1 Facepiece was designed without electronic components to minimize weight, reduce your stress and fatigue and improve your overall performance level. There are no electronic components on the outside of the facepiece that may result in snag and entanglement hazards. What’s more, by eliminating costly electronic components, the price is reduced substantially, allowing personal-issue facepieces to be a cost-effective measure. The G1 facepiece utilizes an inhalation check valve when the second stage regulator is connected, which directs potentially contaminated exhaled air away from the second stage regulator. But MSA didn’t stop there. The MSA G1 SCBA is also equipped with a speaking diaphragm to increase speech clarity while off air.
Taking the preferred features of the Ultra Elite Facepiece – Comfort, Field of View, Superior Communications, and Fit – we’ve taken the G1 Facepiece to the next level with an Open-Port that provides low breathing resistance in standby modes.
The G1 Facepiece can help you to conserve energy for when you need it most.
Heads Up
Internal HUD display. No facepiece electronics? It’s not only possible, it’s here. By placing electronics that power the heads up display within the regulator, MSA has effectively reduced weight, profile, pairing, and cross talk. The HUD is inside the facepiece, so external contaminants cannot block the view and vital displayed relayed information.
This design means that you no longer have to buy HUDs for each facepiece, reducing costs and maintenance. By using revolutionary light pipes, the MSA G1 SCBA heads up display is clear and simple to understand; it’s a HUD system made easy!
Be Heard
Electronic Voice Amplification Shouldn’t Be Optional. Every MSA G1 SCBA is equipped with electronic voice amplification because high quality fireground communications shouldn’t be optional. With patent-pending design, dual microphones integrated into the regulator eliminate the Darth Vader-like inhalation sound. This unique feature automatically activates and shuts down with the unit. Shoulder strap-mounted speaker module provides loud and clear communications from the regulator microphone while maintaining low profile to aid in reducing snag points. Every MSA G1 SCBA is equipped with this cutting-edge technology.
MSA G1 SCBA
06/25/2024 C14 37 of 61
7 Designed to Fit YOUR Needs
Cutting-edge technology. The MSA G1 SCBA with Integrated TIC meets your demands, providing more functionality and safety than ever before. G1 Control Module integrates TIC technology to eliminate the need to carry more gear while adding speed and effectiveness.
The iTIC draws power from G1 Power Module—no separate battery is necessary. Module offers both analog and color digital LCD displays to make certain that your status is available at all times. Autostart motion control mechanism built into the control module intuitively provides the information you need when you need it. Adding yet another layer to ease-of-use: no matter which button is pressed, your information displays.
Highly configurable and customizable. The MSA G1 SCBA’s user-selectable configurations are an industry first: pressure, time remaining calculation, breathing time, temperature (the ability to set your own temperature alarm), and pressure drop (to alert you to leaks, either primary or secondary). What’s more, the control module and HUD can be programmed to display information required by your particular specification. But best of all, electronics can be adjusted to YOUR needs. The MSA G1 SCBA provides the ability to configure this device to follow any standard operating procedure, with alarm settings, lights and information provided on the control module.
The MSA G1 SCBA is designed for the flexibility you need! The G1 Facepiece can help you to conserve energy for when you need it most.
Always in Demand
G1 Mask-Mounted Regulator. The G1 Regulator houses easy-to-operate heads up display and communications, yet is the smallest and lightest regulator available. The G1 Regulator has an optional purge cover that can be used to start air flow during emergency situations. The G1 Regulator can also be shut off and removed from the mask with one simple action! The G1 Regulator is always in DEMAND!
06/25/2024 C14 38 of 61
8MSAfi r e .com
MSA G1 SCBA
The Power of One
Central Power System. With only one centralized power source, you can use either alkaline or an industry-fi rst rechargeable battery.
As the ONLY manufacturer to off er rechargeable batteries, we’ve taken SCBA protection to a whole new level — fi nally, an SCBA that doesn’t require multiple battery sizes! No need to manage battery types, compartments and change-outs, resulting in lower cost of ownership.
Finally, an SCBA Where One Size Really
Can Fit All
Ergonomics. The MSA G1 SCBA is the only SCBA on the market that off ers harness customization to ensure improved comfort, balance and fi t. By providing an adjustable lumbar pad, you can have a tailored unit with up/down and pivot capabilities that can actually move with you. Widened, adjustable shoulder straps enhance weight distribution and comfort.
Through use of interlocking shoulder straps and strategically placed friction pads, the MSA G1 SCBA provides increased fi t and stability while allowing for easy donning and doffi ng. The G1 Control Module, G1 Regulator and G1 Speaker Module can be confi gured on either shoulder, easily integrating into any standard operating procedure. 06/25/2024 C14 39 of 61
9 Make a Connection
Pressure Reducer. Designed to work with quick-connect or CGA threaded cylinders, there’s a connection to meet your needs. Adding to this flexibility are available direct and remote quick-connect attachment options to enable effortless cylinder change-outs.
Pressure reducer accessory ports allow for future upgrades, including the high pressure Quick-Fill® System. The MSA G1 SCBA is available in both quick-connect and threaded-connection options. With minimal parts, you can easily upgrade from one option to the other! All in all, this unit provides each user with many choices, all of which result in lower cost of ownership.
Find the Hot Spots. And the Heartbeats.
The MSA G1 SCBA with Integrated Thermal Imaging Camera provides EVERY firefighter with the ability to see within dark and smoke-filled environments, aiding in your operation’s speed and effectiveness from the initial 360, to working the fire, overhaul and rescue. This sight is provided through a thermal imaging camera that is integrated into the G1 SCBA Control Module, eliminating the need to carry additional equipment and the concern of snag hazards.
• Compatible with all G1 SCBA via simple field upgrade
• Powered by the G1 SCBA single integrated power source – never check multiple batteries again
• Single button functionality allows for simple, intuitive use • Lightweight - Adds only 4.2 oz. as compared to standard G1 Control Module
• Up to five user-selectable palettes
– 10+ additional palettes available via MSA A2 Software • 220 x 176 display ensures crystal clear images
When Air is Low, Seconds Matter
Universal Air Connection (UAC). When air is low and you must access the UAC for emergency purposes, seconds matter. That’s why MSA invented the patent-pending RIT light to shine a bright white LED on the UAC connection, making it easier to find and connect to a rescue air source. The primary UAC illuminates when end of service time indicator (EOSTI) reaches 35%.
06/25/2024 C14 40 of 61
10 MSA G1 SCBA
A Faster Responder
Conditions faced by firefighters on a daily basis have changed dramatically through the years. The MSA G1 SCBA is designed with technology to drive firefighting into the future. Use of Bluetooth, Radio-Frequency Identification (RFID), Near Field Communication (NFC), and long-range capability allows for fast and easy integration of current and future technologies, providing firefighters with the latest tools available to get their job done.
• MSA G1 SCBA Bluetooth module uses audio and data channels to communicate with Motorola, Kenwood, BKR, Harris, and MSA ALTAIR 5X Detectors with PID. Use of the same Bluetooth connection lets users connect to the G1 SCBA via MSA A2 Software for custom configuration to your department’s standard operating procedures.
• RFID reader/writer stores comprehensive tag information and enables pairing with Bluetooth devices. Incorporated Bluetooth provides data link capability for SCBA data log retrieval and electronics troubleshooting. • Long-range radio communication provides incident command with specific personnel information through MSA A2 Software.
MSA G1 5500 SCBA
Staying at the forefront of safety means constantly evolving to meet the ever-changing demands you face each day on the job. Helping meet these demands MSA’s tried-and-trusted G1 SCBA now comes available in a 5500 psig operating system. The MSA G1 offers our lowest profile, most comfortable, streamlined, balanced and configurable SCBA with the lightest weight 5500 psi cylinders on the market today, providing its users:
• Reduced stress and fatigue
• Increased maneuverability in tight spaces, reducing your chance of getting snagged, improving your mobility, and helping keep you safe in dangerous environments • 30-, 45-, or 60-minute duration cylinders allows you to keep the same operating system, while reducing weight, profile, additional training time and overall expenses Bluetooth link status
Long-range radio status
Configurable display
06/25/2024 C14 41 of 61
MSA G1 SCBA Accessories
11 PART NUMBER Description
10148741-SP MSA Rechargeable Battery
10158385 MSA G1 Charger
EXTENDAIRE II SYSTEM
10205767 ExtendAire II System Conversion Kit for G1 SCBA, UEBSS, 2018 ed 10203820 Replacement pouch for G1 ExtendAire II System, UEBSS, 2018 ed. 10156464 ExtendAire II System Conversion Kit for G1 SCBA, 2013 ed. 10156466-SP Replacement pouch for G1 ExtendAire II System, 2013 ed.
MSA G1 SCBA Rechargeable Battery
MSA offers the first NIOSH-approved and NFPA-compliant SCBA platform to provide a rechargeable battery, eliminating the need for disposable replacement batteries.
Portable and compact rapid charger can charge up to six batteries at once; batteries can reach full charge in just six hours.
• Reduced cost of ownership, never waste money on disposable batteries • No need for multiple battery sizes in multiple locations • Never waste time on alkaline battery replacement
• Single source powers entire SCBA
• Save 1/2 lb. when compared to alkaline battery pack
• Rapid charging with available smart charger.
MSA G1 ExtendAire System
MSA G1 ExtendAire II System is a Universal Emergency Breathing Supply System (UEBSS) accessory that uses intermediate-pressure air to provide firefighters with emergency breathing air by allowing firefighters to quickly and easily interconnect to fellow firefighter’s air supply. System integrates into G1 SCBA, providing unrestricted mobility and easy access during emergency situations.
Locking quick-connects with integrated check valve prevent contamination of breathing air pathway by ambient atmosphere.
G1 ExtendAire II System features integrated rescue hose and manifold assembly that uses both male and female quick-connect fittings, and stows in low-profile pouch that mounts on carrier assembly.
G1 ExtendAire II System is NIOSH-approved and NFPA 1981-2018 edition-compliant. * Charger not included
06/25/2024 C14 42 of 61
12 QUICK-FILL SYSTEM
REPLACEMENT
10156465 Waist-mounted Quick-Fill System for MSA G1 SCBA 10156467 Replacement Quick-Fill System pouch for MSA G1 SCBA 10156468 3-ft. Quick-Fill System hose in pouch for MSA G1 SCBA 25 ft. 12 ft. 10 ft. 8 ft. 6 ft. 3 ft.
QUICK-FILL
SYSTEM HOSES
485332 802690 802689 802688 802687 485331 FQD x FQD *
487907 802677 802675 802673 802671 492796 FQD x CGA-347 outlet 487909 802685 802683 802681 802679 487427 FQD x CGA-347 CN 487906 802704 802703 802702 802701 802705 FQD x SAE-4
487908 802678 802676 802674 802672 492797 FQD x CGA-346 outlet 487910 802686 802684 802682 802680 487428 FQD x CGA-346 CN PART
NUMBERS Operating Pressure Description
10206310 2216 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (UEBSS, 2018 ed.), remote gauge, URC, Quick-Connect 10169710 2216 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (2013 ed.), remote gauge, URC, Quick-Connect 10206311 4500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (UEBSS, 2018 ed.), remote gauge, URC, Thread Connect 10206313 4500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (UEBSS, 2018 ed.), remote gauge, URC, Quick-Connect 10169711 4500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (2013 ed.), remote gauge, URC, Quick-Connect 10192465 4500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (2013 ed.), remote gauge, URC, Thread Connect 10206312 5500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (UEBSS, 2018 ed.), remote gauge, URC, Quick- Connect 10197179 5500 G1 RIT System, FCPC, Regulator, 6-Ft Quick-Fill & ExtendAire II Systems (2013 ed.), remote gauge, URC, Quick-Connect MSA G1 SCBA
The Quick-Fill System
The Quick-Fill System lets MSA air mask users refill and transfill air cylinders* while SCBA is worn, without removing the air cylinder –even in IDLH atmospheres. Use this MSA option to:
• Fill SCBA cylinder from a mobile compressor or cascade system in less than a minute.
• Transfill between two cylinders, providing emergency breathing system.* • Extend air supply over longer durations, using a remote compressed-air source.
Air masks compliant to recent NFPA standards have Quick-Fill System URC fitting located at the Audi-Larm Audible Alarm warning device. Quick-Fill System hose with quick-disconnect connects air source to adapter for air transfer. See Bulletin 0105-92-MC for a Quick-Fill System Q&A.
MSA G1 RIT Systems
The Quick-Fill System lets MSA air mask users refill and transfill air cylinders* while SCBA is worn, without removing the air cylinder – even in IDLH atmospheres. Use this MSA option to:
• Fill SCBA cylinder from a mobile compressor or cascade system in less than a minute. • Transfill between two cylinders, providing emergency breathing system.* • Extend air supply over longer durations, using a remote compressed-air source.
Air masks compliant to recent NFPA standards have Quick-Fill System URC fitting located at the Audi-Larm Audible Alarm warning device.
Quick-Fill System hose with quick-disconnect connects air source to adapter for air transfer. See Bulletin 0105-92-MC for a Quick-Fill System Q&A.
Note: This RIT system does NOT include cylinder. Please see cylinder ordering information. 06/25/2024 C14 43 of 61
13 G1 RescueAire® II System
The MSA G1 RescueAire II System for Rapid Intervention Teams (RITs) provides firefighters with emergency breathing air, including air supply to trapped firefighters wearing SCBA with compatible system(s). Built for extreme fire service conditions, G1 RescueAire II System offers two operating pressures, 2216 and 4500 psi. Optional-use shoulder strap provides hands-free carrying.
System incorporates G1 Regulator; RIT teams can provide air to downed firefighter wearing G1 Facepiece. G1 Regulator connects directly to G1 Facepiece for maximum rescue capability, supported by flame and heat-resistant carrying harness of Nomex and Kevlar materials.
G1 RescueAire II System includes:
• SuperLite® Cylinder
• 36” Quick-Fill System EBS Connection
• ExtendAire System EBS Connection
• G1 PR-14 Pressure Reducer
• G1 Regulator
• Carrying harness with adjustable shoulder strap
• Audi-Larm™ Audible Alarm low pressure warning device
MSA Rescue Belt II System for MSA G1 SCBA
MSA’s innovative device for emergency egress, the Rescue Belt II System for the G1 SCBA, is an integrated personal escape system that allows firefighters to rappel to safety should they become trapped in a building’s upper level. G1 Rescue Belt II System is NFPA 1983-certified for use as a personal escape system for emergency escape when installed on MSA- approved air masks. Device can also be used as a standalone product when not installed on an air mask. The Rescue Belt II System can be ordered as an MSA G1 SCBA option or as an individually-sold component for upgrade of your existing MSA G1 SCBA.
Key Features:
• One-piece cylinder valve and first-stage regulator incorporates downstream design to reduce moisture buildup and dual
springs for maximum reliability.
• Low-profile escape cylinder is worn on either right
or left hip for easier movement within tight spaces.
• Shoulder support strap incorporates hose keeper;
regulator hose stays close to body to reduce snagging.
• Escape cylinders rated at 5-, 10- and 15-minutes.
• Pressure gauge recessed into valve housing protects
gauge and reduces size and profile.
• Two harness materials: standard nylon for chemical
resistance and Kevlar for high heat environments
or those with spark potential.
• Regulator offers bypass and purge cover.
• NIOSH-approved as combination supplied-air respirator and self-contained breathing apparatus.
PART NUMBER Description
10161130 RescueAire II System, Snap-Tite, 4500,
10161142 60-Min Cylinder
10161141 RescueAire II System, Snap-Tite, 4500, Less Cylinder 10161143 RescueAire II System, Snap-Tite, 2216,
10207540 30-Min Cylinder
10207542 RescueAire II System, Snap-Tite, 2216, Less Cylinder 10207541 RescueAire II System, UEBSS, 4500, 60-Min Cylinder 10207543 RescueAire II System, UEBSS, 4500, Less Cylinder Rope Connectors
50-FT. FIRETECH 32 10173088 10173089 10173090 10173101
50-FT. MSA SAFETECH 10173102 10173103 10173104 10173105 Crosby Hook Carabiner Lightning Hook Lightning
GT Hook
06/25/2024 C14 44 of 61
14 MSA G1 SCBA
Ordering Selection Matrix
0117-03-MC / 4.2023
© MSA 2022
A PCG
A B C D E F G H
PART NUMBER
Quantity
G1 PremAire® Cadet Escape Respirator
Ordering Selection Matrix
A Type
PCG PremAire Cadet Escape G1
B Carrier & Harness Type
1 Nylon, strap carrier, standard
2 Kevlar, strap carrier, standard
3 Nylon, bag carrier, standard
4 Kevlar, bag carrier, standard
Notes:
Aluminum escape cylinders are not
compatible with bag carriers.
C Pad Option
0 None
1 Shoulder
D Escape Cylinder
A 5-minute aluminum
B 10-minute aluminum
C 5-minute carbon
D 10-minute carbon
E 15-minute carbon
F 5-minute aluminum, less air
G 10-minute aluminum, less air
H 5-minute carbon, less air
J 10-minute carbon, less air
K 15-minute carbon, less air
E MMR Regulator
A G1 Regulator, purge cover
F G1 Facepiece
1 None
2 G1 Facepiece with 4-pt adjustable
head harness, medium[1]
3 G1 Facepiece with 5-pt adjustable
head harness, medium[1]
4 G1 Facepiece with rubber head
harness, medium[1]
Notes:
If desired facepiece is not available here,
choose "None" and select from the G1
Facepiece ATO.
G Quick Disconnect
0 None
A Snap-Tite, aluminum
B Snap-Tite, stainless steel
C Snap-Tite, brass
D Hansen, stainless steel
E Hansen, brass
F Foster, steel
G Foster, stainless steel
H Foster, brass
J Snap-Tite, locking, aluminum
K Snap-Tite, locking, stainless steel
M Snap-Tite, locking, brass
N Foster, stainless steel
P Cejn, locking
H Case
0 None
1 Hard plastic case
Key:
[1]Facepiece includes nosecup, but does not include neckstrap.
Note:
An additional surcharge will be added to configurations that are classified as hazardous materials 0117-03-MC / 4.2023
© MSA 2022
A PCG
A B C D E F G H
PART NUMBER
Quantity
G1 PremAire® Cadet Escape Respirator
Ordering Selection Matrix
A Type
PCG PremAire Cadet Escape G1
B Carrier & Harness Type
1 Nylon, strap carrier, standard
2 Kevlar, strap carrier, standard
3 Nylon, bag carrier, standard
4 Kevlar, bag carrier, standard
Notes:
Aluminum escape cylinders are not
compatible with bag carriers.
C Pad Option
0 None
1 Shoulder
D Escape Cylinder
A 5-minute aluminum
B 10-minute aluminum
C 5-minute carbon
D 10-minute carbon
E 15-minute carbon
F 5-minute aluminum, less air
G 10-minute aluminum, less air
H 5-minute carbon, less air
J 10-minute carbon, less air
K 15-minute carbon, less air
E MMR Regulator
A G1 Regulator, purge cover
F G1 Facepiece
1 None
2 G1 Facepiece with 4-pt adjustable
head harness, medium[1]
3 G1 Facepiece with 5-pt adjustable
head harness, medium[1]
4 G1 Facepiece with rubber head
harness, medium[1]
Notes:
If desired facepiece is not available here,
choose "None" and select from the G1
Facepiece ATO.
G Quick Disconnect
0 None
A Snap-Tite, aluminum
B Snap-Tite, stainless steel
C Snap-Tite, brass
D Hansen, stainless steel
E Hansen, brass
F Foster, steel
G Foster, stainless steel
H Foster, brass
J Snap-Tite, locking, aluminum
K Snap-Tite, locking, stainless steel
M Snap-Tite, locking, brass
N Foster, stainless steel
P Cejn, locking
H Case
0 None
1 Hard plastic case
Key:
[1]Facepiece includes nosecup, but does not include neckstrap.
Note:
An additional surcharge will be added to configurations that are classified as hazardous materials MSA G1 PremAire® Cadet Escape Respirator
This combination supplied-air respirator with escape cylinder is used for entry into or escape from hazardous, confined space or immediately dangerous to life or health atmospheres. Streamlined, lightweight design incorporates a technologically advanced, light, low profile, open-port facepiece that provides cross-contamination protection. • One-piece cylinder valve and first-stage regulator incorporates downstream design to reduce moisture buildup and dual springs for maximum reliability.
• Low-profile escape cylinder is worn on either right or left hip for easier movement within tight spaces.
• Shoulder support strap incorporates hose keeper; regulator hose stays close to body to reduce snagging.
• Escape cylinders rated at 5-, 10- and 15-minutes.
• Pressure gauge recessed into valve housing protects gauge and reduces size and profile.
• Two harness materials: standard nylon for chemical resistance and Kevlar for high heat environments or those with spark potential. • Regulator offers bypass and purge cover.
• NIOSH-approved as combination supplied-air respirator and self-contained breathing apparatus.
06/25/2024 C14 45 of 61
15 MSA A2 Monitoring Software
MSA A2 Software offers the ability to customize your SCBA to meet your SOP, analyze use data and reliably enhance firefighter safety and accountability on the fire scene. Software monitors firefighter status remotely from incident command. In-depth reporting capabilities include data log search for incident reports by date and/or alarm type; reports can be exported, filtered, printed, and more. Users can also retrieve event logs for any recorded incidents.
• Software provides the ability to configure alarm, control module, accountability, speaker module, and HUD settings.
• MSA G1 SCBA stores 25 hours-of-use data; MSA A2 Software allows viewing of incident date, duration, air used, alarm status, and more. • Tag creation allows G1 SCBA customization to meet your needs and track the location of each component. Incident event logs include date, time, duration, incident number, dispatch center number, firefighter name, firefighter team, PASS device serial number, time firefighter went on-air, any event recorded, and pressure remaining when event occurred.
Additional G1 SCBA Accessories
Part Number Description
10148740-SP Replacement alkaline battery pack
10148741-SP Replacement rechargeable battery pack
10158385 Rechargeable battery charging station
10149701-SP Quick-connect adapter for 2216 psig cylinders 10149702-SP Quick-connect adapter for 4500/5500 psig cylinders 10158389 Retainer Kit for H-30 carbon (807587) 4500 psig (Type 2 - dovetail)
10158390 Retainer Kit for H-45 LP carbon (10035644) 4500 psig (Type 3 - dovetail)
10158401 Retainer Kit for L-30 carbon (807586) 2216 psig (Type 4 - dovetail)
10162403 Quick-connect adapter for fill station
10158401 Retainer Kit for H-45 carbon (807570) 4500 psig (Type 4 - dovetail)
Part Number Description
10158402 Retainer Kit for H-60 carbon (807588) 4500 psig (Type 5 - dovetail)
10158408 Quick-connect adapter for fill station
10164940 G1 Custom Tool Kit
10083875 RFID Tag
10158407 RFID reader/writer (primary use with A2)
10186214 RFID read only (primary use with AIMS)
10175010-SP G1 Control Module w/ Integrated TIC upgrade kit - 2216 psig 10175021-SP G1 Control Module w/ Integrated TIC upgrade kit -4500/5500 psig 10183992 Kit, Protective Cap & Boot for 30 min cylinder 10183993 Kit, Protective Cap & Boot for 45 min LP cylinder 06/25/2024 C14 46 of 61
MSA Connected Firefi ghter Platform
16 MSA G1 SCBA
FireGrid
FireGrid is a cloud-based suite of applications comprised of various mobile, tablet and web applications enabling greater fl eet management and data-driven decisions through increased device usage, personnel and incident awareness. It introduces remote monitoring functionality, automatic report generation, and advancements in inventory management, local monitoring, device personalization, confi guration and fi rmware updates.
MSA’s applications leverage on-scene device data to enable Incident Commanders to make more-informed decisions and aid in reducing cognitive overload through increased situational awareness of devices, personnel and event data. Post-scene, FireGrid provides automated report generation, capturing detailed device and personnel data from cloud-connected devices. On-scene product usage information is automatically stored in the cloud to access from anywhere.
Inventory management is enabled by a centralized, cloud-based digital asset management and compliance application. Simply using the connected devices drives usage-based preventative maintenance, enhanced fl eet management, improved resource effi ciency and the ability to avoid over-servicing product due to the on-scene data automatically documenting and storing in the inventory management application.
FireGrid aids in ensuring all products are compliant and ready for use through summary dashboards and assigning inspection and service procedure reminders. Dashboard analytics visualize department trends to understand what’s happening over time.
LOCAL MONITORING
REMOTE MONITORING
INVENTORY MANAGEMENT REPORTS AND ANALYTICS
06/25/2024 C14 47 of 61
17 The MSA Connected Firefighter Platform is a network of products expanding the connectivity offering of MSA solutions to enhance firefighter safety. The Connected Firefighter Platform is comprised of MSA’s cloud-connected products enabling incident command, inventory management compliance as well as reporting and analytics. It includes the G1 SCBA at the center, ALTAIR® Portable Gas Detection, MSA HUB Fire Service, LUNAR® Connected Device, and FireGrid™. As features and functionality are expanded, the platform will further support respiratory and PPE products.
MSA HUB
The MSA HUB provides a wireless gateway to the cloud, enabling wireless on-scene data for local and remote Incident Command for additional eyes on the scene and a more seamless post-incident evaluation. The MSA HUB creates its own hotspot for local use with no internet connection needed or connects to the cloud via an existing internet connection. It connects to the tablet application for local monitoring and sends all data to the FireGrid web-based platform for remote monitoring, post-scene evaluation, reporting and inventory management.
LUNAR CONNECTED DEVICE
As part of the MSA Connected Firefighter Platform, LUNAR Connected Device and FireGrid provide enhanced connectivity, search and rescue technology, and situational awareness—on and off scene. These devices and solutions can help with keeping the entire team connected, locating a downed team member, accounting for the entire crew inclusive of seeing their location on a map, and automatically notifying all team members, including Incident Command, that there is an alarm. The LUNAR device has a direct cloud connection which provides device data to Incident Command on MSA’s tablet-based local monitoring application and is available for use on FirstNet®, ensuring priority on AT&T’s cellular network.
06/25/2024 C14 48 of 61
MSAsafety.com 18
MSA G1 SCBA
Standard, Lightweight Carbon Cylinders
MSA Standard, Lightweight Carbon Cylinders (also known as SuperLite Cylinders) are a staple in the Fire Service. Available in 2216, 4500, and 5500 psi, these cylinders are durable and lightweight.
The cylinder is wound thousands of times with high-strength carbon fibers impregnated with epoxy resin.
A final over-wrap of fiberglass fibers enhances abrasion resistance.
Then, a glow-in-the-dark luminescent band is applied for improved night visibility.
Eclipse Cylinders
The Eclipse Cylinder is a new option for the G1 SCBA that provides an exciting, sleek black finish. The Eclipse Cylinders incorporate a lightweight and streamlined design and are available in 4500 psi with 30-minute and 45-minute Low-Profile rated service duration.
G1 SCBA Cylinders
06/25/2024 C14 49 of 61
19 Locking Handwheel
The Locking handwheel locks when the cylinder valve is in an open position. It requires only a simple turning motion of the handwheel to open the cylinder, but to close the cylinder valve the user must pull the handwheel outward and then turn to close.
G1 SCBA Cylinder Options
Connection Type
Threaded Remote Connection
Threaded Remote Connection is available in CGA 346 (2216 psi) and CGA 347 (4500 and 5500 psi) for a traditional, thread on connection.
Quick-Connect Remote Connection
The Quick-Connect option is available for rapid, quick changing of cylinders. The Quick-Connect Cylinders come with an installed adapter to easily push-to-connect with the remote handwheel.
MSA G1 SCBA Cylinders are available for purchase in a wide variety of options and ability for customization.
Handwheel Type
Standard Handwheel
The Standard handwheel allows for simple and easy opening and closing of the cylinder valve by turning the handwheel knob. 06/25/2024 C14 50 of 61
G1 SCBA Cylinder Specs
MSAsafety.com 20
MSA G1 SCBA
Standard, Lightweight Carbon Cylinders
Cylinder Pressure Service Time
Available
Breathable Air
Cylinder Height
(w/Valve)Cylinder Diameter Cylinder Weight
(Full)
30-minute Cylinders
2216 PSI 30 Minutes 45 ft.³22.8” (579 mm) 6.7” (170 mm)11.3 lb. (5.1 kg) 4500 PSI 30 Minutes 45 ft.³21.4” (544 mm) 5.4” (137 mm)10.4 lb. (4.7 kg) 5500 PSI 30 Minutes 45 ft.³21.0” (533 mm) 5.0” (127 mm)9.9 lb. (4.5 kg) 45-minute Cylinders
4500 PSI 45 Minutes (low-profi le)65 ft.³23.1” (587 mm) 6.3” (160 mm)13.9 lb. (6.3 kg) 4500 PSI 45 Minutes 65 ft.³21.0” (533 mm) 6.8” (173 mm)14.4 lb. (6.5 kg) 5500 PSI 45 Minutes 65 ft.³22.7” (577 mm) 5.8” (147 mm)13.5 lb. (6.1 kg) 60-minute Cylinders
4500 PSI 60 Minutes 87 ft.³23.9” (607 mm) 7.1” (180 mm)17.2 lb. (7.8 kg) 5500 PSI 60 Minutes 87 ft.³22.7” (577 mm) 6.7” (170 mm)17.4 lb. (7.9 kg) Eclipse Cylinders
4500 PSI 30 Minutes 45 ft.³21.7” (551 mm) 5.4” (137 mm)10.2 lb. (4.6 kg) 4500 PSI 45 Minutes (low-profi le)65 ft.³23.5” (597 mm) 6.1” (155 mm)13.5 lb. (6.1 kg) 2216 psi Standard
yellow band
4500 psi Standard
green band
5500 psi Standard
blue band
4500 psi Eclipse
green band
For easy-to-read cylinder identifi cation, MSA can customize any G1 Cylinder to have a department’s logo wrapped under the clear coat of the cylinder.
This customization can be done by either a refl ective or paper band in single or multi-color.
Custom Logo
Custom Labels
Single Color Multi Color
Logo
Here
06/25/2024 C14 51 of 61
MSA G1 SCBA Cylinder Ordering Information
21 MSA G1 SCBA Cylinders for Threaded Remote Connection MSA G1 SCBA Cylinders for Quick-Connect Remote Connection MSA G1 SCBA Standard Cylinders for Threaded & Quick-Connect Remote Connection w/Locking Handwheel
Cylinder Pressure Cylinder Type Connection Type Handwheel Type Air Less Air 2216 PSIG 30-minute Threaded Standard 10156422-SP 10156431-SP 4500 PSIG 30-minute Threaded Standard 10156423-SP 10156432-SP 4500 PSIG 45-minute (low-profile)Threaded Standard 10156424-SP 10156433-SP 4500 PSIG 45-minute Threaded Standard 10156425-SP 10156434-SP 4500 PSIG 60-minute Threaded Standard 10156426-SP 10156435-SP 5500 PSIG 30-minute Threaded Standard 10185508 10185602 5500 PSIG 45-minute Threaded Standard 10185509 10185603 5500 PSIG 60-minute Threaded Standard 10185510 10185604 Cylinder Pressure Cylinder Type Connection Type Handwheel Type Air Less Air 2216 PSIG 30-minute Quick-Connect Standard 10175706 10175711 4500 PSIG 30-minute Quick-Connect Standard 10175707 10175712 4500 PSIG 45-minute (low-profile)Quick-Connect Standard 10175708 10175713 4500 PSIG 45-minute Quick-Connect Standard 10175709 10175714 4500 PSIG 60-minute Quick-Connect Standard 10175710 10175715 5500 PSIG 30-minute Quick-Connect Standard 10181628 10181708 5500 PSIG 45-minute Quick-Connect Standard 10181629 10181709 5500 PSIG 60-minute Quick-Connect Standard 10181630 10181710 Cylinder Pressure Cylinder Type Connection Type Handwheel Type Air Less Air 4500 PSIG 30-minute Threaded Locking 10191802 10191838
4500 PSIG 45-minute (low-profile)Threaded Locking 10191806 10191842 4500 PSIG 45-minute Threaded Locking 10191804 10191840
4500 PSIG 60-minute Threaded Locking 10191808 10191844
4500 PSIG 30-minute Quick-Connect Locking 10191803 10191839 4500 PSIG 45-minute (low-profile)Quick-Connect Locking 10191807 10191843 4500 PSIG 45-minute Quick-Connect Locking 10191805 10191841 4500 PSIG 60-minute Quick-Connect Locking 10191809 10191845 Threaded Remote Connection
Threaded Remote Connection
06/25/2024 C14 52 of 61
22 MSA G1 SCBA
MSA G1 SCBA Eclipse Cylinders
MSA G1 SCBA Cylinder Accessories
MSA G1 SCBA Accessories
Cylinder Pressure Cylinder Type Connection Type Handwheel Type Air Less Air 4500 PSIG 30-minute Threaded Standard 10204941 10204965 4500 PSIG 45-minute (low-profile)Threaded Standard 10204945 10204969 4500 PSIG 30-minute Quick-Connect Standard 10204942 10204966 4500 PSIG 45-minute (low-profile)Quick-Connect Standard 10204946 10204970 4500 PSIG 30-minute Threaded Locking 10204943 10204967
4500 PSIG 45-minute (low-profile)Threaded Locking 10204947 10204971 4500 PSIG 30-minute Quick-Connect Locking 10204944 10204968 4500 PSIG 45-minute (low-profile)Quick-Connect Locking 10204948 10204972 Part Number Description
10149701-SP Quick-Connect adapter for 2216 psig cylinders 10149702-SP Quick-Connect adapter for 4500/5500 psig cylinders 10158389 Retainer kit for 4500 psig, 30-min. cylinder (type 2 dovetail) 10158390 Retainer kit for 4500 psig, 45-min. low-profile cylinder (type 3 dovetail) 10158401 Retainer kit for 4500 psig, 45-min. cylinder (type 4 dovetail) 10158402 Retainer kit for 4500 psig, 60-min. cylinder (type 5 dovetail) 10162403 Quick-Connect adapter for fill station
10183992 Kit, protective cap & boot for 30-min. cylinder 10183993 Kit, protective cap & boot for 45-min. low-profile cylinder Cap & Boot
The Cap & Boot provide a
protective, rubber cover to the
top and bottom of the cylinder.
Only available for Standard,
Lightweight Carbon Cylinders
in 30-minute and 45-minute
LP 4500 psi.
Part Number Description
10148740-SP Replacement alkaline battery pack
10148741-SP Replacement rechargeable battery pack
10158385 Rechargeable battery charging station
10164940 G1 Custom Tool Kit
10083875 RFID Tag
10158407 RFID reader/writer (primary use with A2)
10186214 RFID read only (primary use with AIMS)
10175010-SP G1 Control Module w/ Integrated TIC upgrade kit - 2216 psig 10175021-SP G1 Control Module w/ Integrated TIC upgrade kit -4500/5500 psig 06/25/2024 C14 53 of 61
23 MSA G1 SCBA Facepieces
MSA SCBA Facepiece Accessories
Ordering Selection Matrix
0105-173-MC / 4.2023
© MSA 2022
A-G1FP 1 1
A B C D E F G
PART NUMBER
Quantity
MSA G1 Facepiece
Ordering Selection Matrix
A Application
F Fire
B Size
S Small
M Medium
L Large
C Material
1 Hycar
D Nosecup
0 None
S Small
M Medium
L Large
E Head Harness
0 None
4 4 pt Adjustable
5 5 pt Adjustable
R Rubber
F Neckstrap
0 None
C Cloth
R Rubber
G Regulator Connection
1 Fixed Push-to- Connect
Note:
Part numbered facepieces are also
available
An additional surcharge will be added
to configurations that are classified as hazardous materials 0105-173-MC / 4.2023
© MSA 2022
A-G1FP 1 1
A B C D E F G
PART NUMBER
Quantity
MSA G1 Facepiece
Ordering Selection Matrix
A Application
F Fire
B Size
S Small
M Medium
L Large
C Material
1 Hycar
D Nosecup
0 None
S Small
M Medium
L Large
E Head Harness
0 None
4 4 pt Adjustable
5 5 pt Adjustable
R Rubber
F Neckstrap
0 None
C Cloth
R Rubber
G Regulator Connection
1 Fixed Push-to- Connect
Note:
Part numbered facepieces are also
available
An additional surcharge will be added
to configurations that are classified as hazardous materials Part Number Type Size Nosecup Size Head Harness ATO Configuration 10156458 Fire service Small Small 4-pt. adjustable G1FP-F-S-1-S-4-0-1 10156459 Fire service Medium Medium 4-pt. adjustable G1FP-F-M-1-M-4-0-1 10156460 Fire service Large Large 4-pt. adjustable G1FP-F-L-1-L-4-0-1 10156461 Fire service Small Small Rubber G1FP-F-S-1-S-R-0-1 10156462 Fire service Medium Medium Rubber G1FP-F-M-1-M-R-0-1 10156463 Fire service Large Large Rubber G1FP-F-L-1-L-R-0-1 10161812 Fire service Small Small 5-pt. adjustable G1FP-F-S-1-S-5-0-1 10161813 Fire service Medium Medium 5-pt. adjustable G1FP-F-M-1-M-5-0-1 10161814 Fire service Large Large 5-pt. adjustable G1FP-F-L-1-L-5-0-1 Part Number Description
496081 PAPR Type H filter cartridge (6-pk.)
10042346 PAPR Type H filter cartridge (20-pk.)
10067469 P100/OV canister (1-pk.)
10094315 P100/OV canister (12-pk.)
10144230 Spectacle Kit for G1 Facepiece
10152979 Riot control P100/CN/CS canister (1-pk.)
10160594 Multigas GME/CS/CN/P100 cartridge (1-pk.)
Part Number Description
805078 Quik Chek® Fit Test Adapter
10144220-SP Replacement cloth neck strap
10159699-SP Replacement rubber neck strap
10144231-SP APR filter adapter assembly
10189322 G1 CBRN Nosecup, Large
10189323 G1 CBRN Nosecup, Medium/Small
10046570 CBRN Canister
10144230 G1 Spectacle Kit
06/25/2024 C14 54 of 61
MSA G1 SCBA Fire Service Edition
MSA operates in over 40 countries
worldwide. To find an MSA office near you,
please visit MSAsafety.com/offices.
Note: This Bulletin contains only a general description of the products shown. While product uses and performance capabilities are generally described, the products shall not, under any circumstances, be used by untrained or unqualified individuals. The products shall not be used until the product instructions/user manual, which contains detailed information concerning the proper use and care of the products, including any warnings or cautions, have been thoroughly read and understood. Specifications are subject to change without prior notice. MSA is a registered trademark of MSA Technology, LLC in the US, Europe, and other Countries. For all other trademarks visit https://us.msasafety.com/Trademarks .
MSAsafety.com0105-169-MC / 10.2023
© MSA 2023
Ordering Selection Matrix
0105-172-MC / 4.2023
© MSA 2022
A-G1FS
A B C D E F G H J K L
PART NUMBER
Quantity
MSA G1 SCBA Fire Service Edition
Ordering Selection Matrix
A System Pressure
2 2216 psig
4 4500 psig
5 5500 psig [1]
B Cylinder Connection
2 CGA Threaded Remote Connection
4 CGA Quick Connect Remote
Connection
C Harness
1 Standard without Chest Strap
2 Standard with Chest Strap
3 Serviceable Tunnel without Chest
Strap
4 Serviceable Tunnel with Chest Strap
9 Serviceable Tunnel without Chest
Strap No PASS
10 Serviceable Tunnel with Chest Strap
No PASS
D Cradle Type
M Metal Band
E Lumbar Type
A Adjustable Swiveling Lumbar Pad
B Basic
C Basic, Solid buckle
D Adjustable Swiveling, Solid buckle
1 Rescue Belt II Crosby Hook, 50'
2 Rescue Belt II Carabiner, 50'
3 Rescue Belt II 50' FireTech Rope,
Crosby Hook
4 Rescue Belt II, 50' FireTech Rope,
Carabiner
5 Rescue Belt II, Lightning Hook, 50'
FireTech Rope
6 Rescue Belt II, Lightning Hook, 50'
Aramid/ Nylon Rope
7 Rescue Belt II, Lightning GT Hook, 50'
FireTech Rope
8 Rescue Belt II Lightning GT Hook, 50'
Aramid/ Nylon Rope
F Regulator Type
1 Purge cover Left Shoulder [2]
2 Solid cover Left Shoulder [2]
G Regulator Hose Type
C Continuous
Q Quick Connect
H Emergency Breathing
Support
0 None
1 Waist Mounted Quick-Fill [1]
2 ExtendAire II
3 Waist Mounted Quick-Fill and
ExtendAire II [1]
4 Hose and pouch
5 Waist-mounted Quick-Fill w/hose and
pouch[1]
6 ExtendAire II w/ hose and pouch
7 Waist-mounted Quick-Fill w/hose and
pouch, ExtendAire II [1]
A Pouch only
J Speaker Module
L Left Chest [2]
0 None
K PASS
A PASS Right Shoulder [2]
C PASS Telemetry Right Shoulder [2]
E PASS Right Shoulder w/ Integrated
TIC [2]
G PASS Telemetry Right Shoulder w/
Integrated TIC [2]
H No PASS Right Shoulder [2][4]
J No PASS Telemetry Right Shoulder
[2][4]
K No PASS Right Shoulder w/ Integrated
TIC [2][4]
L No PASS Telemetry Right Shoulder w/
Integrated TIC [2][4]
L Battery Type
A Alkaline
R Rechargeable [3]
Notes:
If Telemetry is ordered R must be selected.
Key:
[1]SCBA to SCBA Transfilling is not available with the 5500psig operating system
[2]As Worn
[3]Charger sold separately
[4]Can only be combined with Harness
option 9 or 10
Note:
An additional surcharge will be added to configurations that are classified as hazardous materials
0105-172-MC / 4.2023
© MSA 2022
A-G1FS
A B C D E F G H J K L
PART NUMBER
Quantity
MSA G1 SCBA Fire Service Edition Ordering Selection Matrix A System Pressure 2 2216 psig
4 4500 psig
5 5500 psig [1]
B Cylinder Connection
2 CGA Threaded Remote Connection
4 CGA Quick Connect Remote
Connection
C Harness
1 Standard without Chest Strap
2 Standard with Chest Strap
3 Serviceable Tunnel without Chest
Strap
4 Serviceable Tunnel with Chest Strap
9 Serviceable Tunnel without Chest
Strap No PASS
10 Serviceable Tunnel with Chest Strap
No PASS
D Cradle Type
M Metal Band
E Lumbar Type
A Adjustable Swiveling Lumbar Pad
B Basic
C Basic, Solid buckle
D Adjustable Swiveling, Solid buckle
1 Rescue Belt II Crosby Hook, 50'
2 Rescue Belt II Carabiner, 50'
3 Rescue Belt II 50' FireTech Rope,
Crosby Hook
4 Rescue Belt II, 50' FireTech Rope,
Carabiner
5 Rescue Belt II, Lightning Hook, 50'
FireTech Rope
6 Rescue Belt II, Lightning Hook, 50'
Aramid/ Nylon Rope
7 Rescue Belt II, Lightning GT Hook, 50'
FireTech Rope
8 Rescue Belt II Lightning GT Hook, 50'
Aramid/ Nylon Rope
F Regulator Type
1 Purge cover Left Shoulder [2]
2 Solid cover Left Shoulder [2]
G Regulator Hose Type
C Continuous
Q Quick Connect
H Emergency Breathing
Support
0 None
1 Waist Mounted Quick-Fill [1]
2 ExtendAire II
3 Waist Mounted Quick-Fill and
ExtendAire II [1]
4 Hose and pouch
5 Waist-mounted Quick-Fill w/hose and
pouch[1]
6 ExtendAire II w/ hose and pouch
7 Waist-mounted Quick-Fill w/hose and
pouch, ExtendAire II [1]
A Pouch only
J Speaker Module
L Left Chest [2]
0 None
K PASS
A PASS Right Shoulder [2]
C PASS Telemetry Right Shoulder [2]
E PASS Right Shoulder w/ Integrated
TIC [2]
G PASS Telemetry Right Shoulder w/
Integrated TIC [2]
H No PASS Right Shoulder [2][4]
J No PASS Telemetry Right Shoulder
[2][4]
K No PASS Right Shoulder w/ Integrated
TIC [2][4]
L No PASS Telemetry Right Shoulder w/
Integrated TIC [2][4]
L Battery Type
A Alkaline
R Rechargeable [3]
Notes:
If Telemetry is ordered R must be selected.
Key:
[1]SCBA to SCBA Transfilling is not available with the 5500psig operating system
[2]As Worn
[3]Charger sold separately
[4]Can only be combined with Harness
option 9 or 10
Note:
An additional surcharge will be added to configurations that are classified as hazardous materials
06/25/2024 C14 55 of 61
MSA G1 iTIC
Integrated Thermal Imaging Camera
06/25/2024 C14 56 of 61
MSA provides vision and safety for all
MSA introduced one of the ffrst ffreffghting thermal imaging cameras over a decade ago. In the years that followed, MSA has continued to reffne and innovate the handheld TIC with industry leading products. Our commitment to the vision and safety of the ffre service continues today with the MSA G1 iTIC, a thermal imaging camera integrated directly into the SCBA.
This breakthrough adaptation allows for faster, easier, and more reliable thermal imaging that is available to more ffreffghters than ever before.
The MSA G1 iTIC provides many of the
beneffts found in entry-level handheld
cameras while providing the intuitive
experience and rugged durability
expected from MSA. The iTIC can be
ordered as an upgrade kit, compatible
with any ffelded G1 SCBA or as an
installed accessory on any new
G1 SCBA order — it only adds 4.2 oz. and
1.25" compared to a standard control
module!
Features include outstanding image
quality, a lightweight and ergonomic
design, and multiple customization
options to arrange the unit to your
departments preference. The iTIC takes
advantage of the G1 SCBA's control
module color screen to provide easy
accessibility to thermal imaging any time
that the SCBA has been powered on.
Actual size
Multiple Palettes Available
06/25/2024 C14 57 of 61
MSAFire.com
3 • Lightweight and small.
Only 1.25" longer and 4.2 oz.
heavier than a standard
MSA G1 SCBA control
module
• Compatible with all
fielded G1 SCBA via a
simple field upgrade —
Can also be ordered as an
installed accessory on any
new G1 SCBA
• Powered by the G1 SCBA
single integrated power
source
• Easy customization of
camera features via MSA
A2 Software
• Integration into the SCBA
control module means the
iTIC can never be
forgotten or left behind
• Simple "Point and View"
design allows for easy
understanding of where
the camera is aimed and
what the user is viewing
• Single button
functionality for simple,
intuitive use
• Auto-On feature for iTIC
screen to come on as SCBA
is powered up
• Standard 220 x 176 color
resolution provides
outstanding image
quality
• 30 hZ refresh rate for
smooth image rendering
and no screen freezing
• A full 5 year warranty on
the thermal imager,
extendable to 15 years to
match the G1 SCBA
• 5 user selectable palettes
available at one time with
over 20 to choose from via
MSA A2 software
• NFPA 1981 and 1982 -
2018 Compliant
Features and Benefits
Actual size
06/25/2024 C14 58 of 61
ID 0119-33-MC / 09.2019
© MSA 2019 MSAFire.com
ACCESSORIES
10148741iSP Replacement rechargeable power source for the G1 SCBA 10158385 Charging station – G1 SCBA rechargeable power source
INTEGRATED TIC UPGRADE KITS
10175010iSP G1 Control Module w/ Integrated TIC upgrade kit — 2216 psig
10175021iSP G1 Control Module w/ Integrated TIC upgrade kit — 4500/5500 psig
Technical Specifications
APPROXIMATE
DIMENSIONS
6.5'' x 3.0'' x 1.5'' (LxWxH)
(165 mm x 76 mm x 38 mm)
SENSOR Vanadium Oxide
WEIGHT 4.2 ounces heavier than a standard
control module
POWER SOURCE G1 internal power source
FIELD OF VIEW 35°H; 25°V
APPROVALS NFPA 1981/1982-2018, NIOSH CBRN
NET EQUIVALENT
TEMPERATURE
DIFFERENCE
<100mK (.10°C), average
75mK (.075°C) typical
TEMPERATURE
MEASUREMENT
+/- 18°F (10°C) 0-220°F (0-100°C)
+/- 10% 220°F-932°F (100°C-500°C)
RESOLUTION 220 x 176
REFRESH RATE 30 hz
DETECTION DISTANCE 490 Feet
A B CDEFGH J K L
System
Pressure
Cylinder
Connection Harness Cradle Type Lumbar Type Regulator Type Regulator Hose Type Emergency Breathing
Support Speaker Module PASS Battery Type
2 4
5 2216 psig
4500 psig
5500 psig◆
2 4
CGA Threaded
Remote
Connection
CGA Quick
Connect
Remote
Connection
1 2
3 4
9 10
Standard
without
Chest Strap
Standard with
Chest Strap
Serviceable
Tunnel without
Chest Strap
Serviceable
Tunnel with
Chest Strap
Serviceable
Tunnel without
Chest Strap
No PASS
Serviceable
Tunnel with
Chest Strap
No PASS
M
Metal Band
A
B
C
D
E
1 2
3 4
5 6
7 8
Adjustable
Swiveling
Lumbar Pad
Basic
Basic, Solid
buckle
Adjustable
Swiveling,
Solid buckle
Adjustable
Swiveling,
Berry Compliant,
Solid buckle
Rescue Belt II
Hook, 50'
Rescue Belt II
Carabiner, 50'
Rescue Belt II
50' FireTech
Rope, Hook
Rescue Belt II,
50' FireTech Rope,
Carabiner
Rescue Belt II,
Lightning Hook,
50' FireTech Rope
Rescue Belt II,
Lightning Hook,
50' Aramid/
Nylon Rope
Rescue Belt II,
Lightning GT
Hook, 50'
FireTech Rope
Rescue Belt II
Lightning GT
Hook, 50'
Aramid/ Nylon
Rope
1 2
Purge cover
Left Shoulder †
Solid cover
Left Shoulder †
C
Q
Continuous
Quick Connect
0 1
2 3
5 6
7 A
None
Waist Mounted
Quick-Fill ◆
ExtendAire II
Waist Mounted
Quick-Fill and
ExtendAire II◆
Waist-mounted
Quick-Fill w/ hose
and pouch◆
ExtendAire II w/
hose and pouch
Waist-mounted
Quick-Fill w/ hose
and pouch,
ExtendAire II◆
Pouch only
L
Left Chest †
A
C
E
G
H
J
K
L
PASS Right
Shoulder †
PASS Telemetry
Right Shoulder †
PASS Right
Shoulder w/
Integrated TIC †
PASS Telemetry
Right Shoulder
w/ Integrated
TIC†
No PASS
Right Shoulder
†#
No PASS
Telemetry
Right Shoulder
†#
No PASS Right
Shoulder w/
Integrated TIC
†#
No PASS
Telemetry
Right Shoulder
w/ Integrated
TIC †#
A
R
Alkaline
Rechargeable *
If Telemetry is ordered
R must be selected.
K
A
C
E
G
H
J
K
L
PASS Right Shoulder
†
PASS Telemetry
Right Shoulder †
PASS Right
Shoulder w/
Integrated TIC †
Pass Telemetry
Right Shoulder
w/ Integrated TIC †
No PASS Right
Shoulder†#
No PASS Telemetry
Right Shoulder †#
No PASS Right
Shoulder w/
Integrated TIC†#
No PASS Telemetry
Right Shoulder w/
Integrated TIC†#
† As worn
MSA G1 SCBA Fire Service Edition
K
PASS
Note: This Bulletin contains only a general description of the products shown. While product uses and performance capabilities are generally described, the products shall not, under any circumstances, be used by untrained or unqualiffed individuals. The products shall not be used until the product instructions/user manual, which contains detailed information concerning the proper use and care of the products, including any warnings or cautions, have been thoroughly read and understood. Speciffcations are subject to change without prior notice.
MSA operates in over 40 countries
worldwide. To ffnd an MSA ofi-ce near you,
please visit MSAsafety.com/offices.
06/25/2024 C14 59 of 61
MSA G1 SCBA
Rechargeable Battery
CHANGE IS GOOD
UNLESS IT COMES TO BATTERIES.
There is a new way to deal with replacing SCBA Alkaline batteries … DON’T.
Introducing the first NIOSH approved and NFPA compliant SCBA platform to provide a rechargeable battery.
With the MSA G1 Rechargeable Battery:
•Never open the battery compartment
•Never throw away money on disposable batteries
•Never waste time on Alkaline battery replacement
Take advantage of the latest in technology:
• Lightweight: ½ lb. lighter than G1 Alkaline battery packs • Earth-friendly: Renewable energy option
• Rapid charging: Full charge in just 6 hours
• Portable: Compact charging station
• Convenient: Charges up to six batteries
www.MSAFire.com
TRY IT NOW
SIGN UP FOR YOUR FREE
G1 TRIAL TODAY!
Part Number Description
10148741SP MSA G1 Rechargeable Battery*
10158385 MSA G1 Smart Charger
ID 0105-210-MC / Feb 2016
© MSA 2016 Printed in U.S.A.
* Charger not included
06/25/2024 C14 60 of 61
Proposal for City of Vista RFP for MSA SCBA
Curtis - Tools for Heroes®
STATEMENT OF COMMITMENT
Prior to Delivery of MSA G1 SCBA’s. Curtis will visit Vista Fire Department (VFD) and answer product questions and provide MSA G1 mask fit testing.
- Fit test all available fire fighters (using an OHD fit tester) and provide the VFD with a report of MSA G1 Mask size and “fit factor score”.
- Answer questions about G1 design and features.
Upon delivery of MSA SCBA, LNCS Sale Representative and Product Specialists will:
- LNCS will assist received inventory items and cross
reference with packing slip and order forms.
- LNCS will help unpack, assemble, and test each SCBA for functionality. - LNCS will help sort and organize equipment for distribution. - Train all available Fire Department members on the design and use of the MSA G1 SCBA.
- Discuss Daily, Monthly, yearly operational inspections. - Lead/Guide participating firefighting personnel on a “use and applications drill”.
Continued Support will be provided by LNCS’s real-time
Customer Service and Product Support Teams.
- All LNCS service technicians hold current factory repair certification on MSA SCBA products.
- LNCS technicians are recertified each year to provide current knowledge and advanced education.
- LNCS Service Technicians will complete all MSA level I and II warranty repairs on a mobile basis or at the LNCS’ Salt Lake Service & Operations Center.
- LNCS’ Salt Lake Service & Operations Center stocks
commonly used repair and maintenance parts.
- Twenty (20) L.N. Curtis & sons service technicians are available to reinforce locally available service technicians and quickly respond to unforeseen needs or disaster-recovery type operations.
06/25/2024 C14 61 of 61