Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
60.0.5 * 1 Identification
· Product identifier
· Trade name: BD5405 Part A (Resin)
· CAS Number:
25068-38-6
· Other means of identification
· NLP Number:
500-033-5
· Index number:
603-074-00-8
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Big Dog Adhesives LLC
435 Harrison Street
ELKHART, IN 46516
USA
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (520) 271-7313
24 Hours: CHEMTREC 1-800-424-9300
2 Hazard(s) identification
· Classification of the substance or mixture GHS07
Skin irritation 2 H315 Causes skin irritation.
Eye irritation 2A H319 Causes serious eye irritation.
Sensitization - skin 1 H317 May cause an allergic skin reaction. · Label elements
· GHS label elements The substance is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labeling:
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700) · Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
(Contd. on page 2)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 355
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 1)
60.0.5 · Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves / eye protection / face protection.
If on skin: Wash with plenty of water.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Dispose of contents/container in accordance with local/regional/national/international regulations. · Information pertaining to particular dangers for man and environment:
· Classification system:
· NFPA ratings (scale 0 - 4)
2 0
0 Health = 2
Fire = 0
Reactivity = 0
· HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
2 0
0 Health = 2
Fire = 0
Reactivity = 0
· Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Classification according to (d)(1)(ii) of § 1910.12000 The SDS issuer does not object to the classifications provided by importers or manufacturers of precursor products.
· Hazards not otherwise classified
There are no adverse physical or health effects known that are not covered by the hazard classes of the Hazard Communications Standard.
3 Composition/information on ingredients
· Chemical characterization: Substances
· CAS No. Description
25068-38-6 reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700)
· Identification number(s)
· NLP Number: 500-033-5
· Index number: 603-074-00-8
4 First-aid measures
· Description of first aid measures
· General information: Immediately remove any clothing soiled by the product. (Contd. on page 3)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 356
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 2)
60.0.5 · After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation. · After skin contact: Immediately wash with water and soap and rinse thoroughly. · After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. · After swallowing: If symptoms persist consult doctor. · Most important symptoms and effects, both acute and delayed No further relevant information available. · Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents: Use fire fighting measures that suit the environment. · Special hazards arising from the substance or mixture No further relevant information available. · Advice for firefighters
· Protective equipment: No special measures required.
* 6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures Not required. · Environmental precautions:
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
· Protective Action Criteria for Chemicals
· PAC-1:
90 mg/m³
· PAC-2:
990 mg/m³
· PAC-3:
5,900 mg/m³
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
* 7 Handling and storage
· Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
· Information about protection against explosions and fires: No special measures required. (Contd. on page 4)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 357
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 3)
60.0.5 · Conditions for safe storage, including any incompatibilities · Storage:
· Requirements to be met by storerooms and receptacles: No special requirements. · Information about storage in one common storage facility: Not required. · Further information about storage conditions: Keep receptacle tightly sealed. · Specific end use(s) No further relevant information available. 8 Exposure controls/personal protection
· Control parameters
· Components with limit values that require monitoring at the workplace: Not required. · Additional information: The lists that were valid during the creation were used as basis. · Exposure controls
· Appropriate engineering controls No further data; see section 7. · Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
· Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air. · Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
· Information on basic physical and chemical properties · General Information
· Physical state Fluid
(Contd. on page 5)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 358
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 4)
60.0.5 · Color: Not determined.
· Odor: Characteristic
· Odor threshold: Not determined.
· Melting point/Melting range: Undetermined.
· Boiling point/Boiling range: Undetermined.
· Flammability: Not applicable.
· Explosion limits:
· Lower: Not determined.
· Upper: Not determined.
· Flash point: Not applicable.
· Decomposition temperature: Not determined.
· pH-value: Not determined.
· Viscosity:
· Kinematic: Not determined.
· Dynamic: Not determined.
· Solubility in / Miscibility with
· Water: Fully miscible.
· Partition coefficient (n-octanol/water): Not determined. · Vapor pressure: Not determined.
· Vapor pressure:
· Density at 20 °C (68 °F): 1.16 g/cm³ (9.6802 lbs/gal) · Relative density Not determined.
· Vapor density Not determined.
· Particle characteristics Not applicable.
· Other information
· Appearance:
· Form: Not determined.
· Important information on protection of health and
environment, and on safety.
· Ignition temperature: Not determined.
· Danger of explosion: Product does not present an explosion hazard. · VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
· Change in condition
· Evaporation rate Not determined.
10 Stability and reactivity
· Reactivity No further relevant information available. · Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · Possibility of hazardous reactions No dangerous reactions known. · Conditions to avoid No further relevant information available. · Incompatible materials: No further relevant information available. · Hazardous decomposition products: No dangerous decomposition products known.
US
(Contd. on page 6)
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 359
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 5)
60.0.5 11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· Primary irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: Sensitization possible through skin contact. · Additional toxicological information:
· Interactive effects No interactive effects between components are known. · Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration) Substance is not listed.
· Alternative sources for toxicological information
No non-standard sources for toxicological information where used. 12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available. · Persistence and degradability No further relevant information available. · Bioaccumulative potential No further relevant information available. · Mobility in soil No further relevant information available. · Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects
· Additional ecological information:
· General notes:
Water hazard class 2 (Assessment by list): hazardous for water Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground. 13 Disposal considerations
· Waste treatment methods
· Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations. · Recommended cleansing agent: Water, if necessary with cleansing agents.
US
(Contd. on page 7)
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 360
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 6)
60.0.5 14 Transport information
· UN-Number
· DOT, IMDG, IATA not regulated
· UN proper shipping name
· DOT, IMDG, IATA not regulated
· Transport hazard class(es)
· DOT, IMDG, IATA
· Class not regulated
· Packing group
· DOT, IMDG, IATA not regulated
· Environmental hazards: Not applicable.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
· Special precautions for user Warning: Miscellaneous dangerous substances and articles · Hazard identification number (Kemler code): 90
· UN "Model Regulation": UN 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (REACTION PRODUCT: BISPHENOL-A-
(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE
MOLECULAR WEIGHT ≤ 700)), 9, III
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
ACTIVE
· Hazardous Air Pollutants
Substance is not listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
(Contd. on page 8)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 361
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 7)
60.0.5 · Carcinogenic categories
· EPA (Environmental Protection Agency)
Substance is not listed.
· TLV (Threshold Limit Value)
Substance is not listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health) Substance is not listed.
· GHS label elements The substance is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labeling:
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700) · Hazard statements
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
· Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves / eye protection / face protection.
If on skin: Wash with plenty of water.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
Dispose of contents/container in accordance with local/regional/national/international regulations. · Chemical safety assessment: A Chemical Safety Assessment has not been carried out. 16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Department issuing SDS: Environment protection department. · Contact: -
· Date of previous version 10/07/2024
· Date of preparation 01/10/2025
· Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) NFPA: National Fire Protection Association (USA)
(Contd. on page 9)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 362
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part A (Resin)
(Contd. of page 8)
60.0.5 HMIS: Hazardous Materials Identification System (USA) VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin irritation 2: Skin corrosion/irritation – Category 2 Eye irritation 2A: Serious eye damage/eye irritation – Category 2A Sensitization - skin 1: Skin sensitisation – Category 1 · * Data compared to the previous version altered.
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 363
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
60.0.5 1 Identification
· Product identifier
· Trade name: BD5405 Part B (Hardener)
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Big Dog Adhesives LLC
435 Harrison Street
ELKHART, IN 46516
USA
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (520) 271-7313
24 Hours: CHEMTREC 1-800-424-9300
* 2 Hazard(s) identification
· Classification of the substance or mixture GHS07
Skin irritation 2 H315 Causes skin irritation.
Eye irritation 2A H319 Causes serious eye irritation.
· Label elements
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms
GHS07
· Signal word Warning
· Hazard statements
Causes skin irritation.
Causes serious eye irritation.
· Precautionary statements
Wash thoroughly after handling.
Wear protective gloves / eye protection / face protection.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
If eye irritation persists: Get medical advice/attention. (Contd. on page 2)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 364
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 1)
60.0.5 · Information pertaining to particular dangers for man and environment:
· Classification system:
· NFPA ratings (scale 0 - 4)
2 1
0 Health = 2
Fire = 1
Reactivity = 0
· HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
2 1
0 Health = 2
Fire = 1
Reactivity = 0
· Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Classification according to (d)(1)(ii) of § 1910.12000 The SDS issuer does not object to the classifications provided by importers or manufacturers of precursor products.
· Hazards not otherwise classified
There are no adverse physical or health effects known that are not covered by the hazard classes of the Hazard Communications Standard.
* 3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions. · Dangerous components:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 6-16% *
* Actual concentration ranges are withheld as a trade secret. * 4 First-aid measures
· Description of first aid measures
· General information: Immediately remove any clothing soiled by the product. · After inhalation: In case of unconsciousness place patient stably in side position for transportation. · After skin contact: Immediately wash with water and soap and rinse thoroughly. · After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. · After swallowing: If symptoms persist consult doctor. · Most important symptoms and effects, both acute and delayed No further relevant information available. · Indication of any immediate medical attention and special treatment needed No further relevant information available.
* 5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam. (Contd. on page 3)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 365
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 2)
60.0.5 · Special hazards arising from the substance or mixture No further relevant information available. · Advice for firefighters
· Protective equipment: No special measures required.
* 6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures Not required. · Environmental precautions: Do not allow to enter sewers/ surface or ground water. · Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). · Protective Action Criteria for Chemicals
· PAC-1:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 6.5 mg/m³ · PAC-2:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 6.6 ppm
· PAC-3:
90-72-2 2,4,6-tris(dimethylaminomethyl)phenol 40 ppm
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
* 7 Handling and storage
· Precautions for safe handling No special precautions are necessary if used correctly. · Information about protection against explosions and fires: No special measures required. · Conditions for safe storage, including any incompatibilities · Storage:
· Requirements to be met by storerooms and receptacles: No special requirements. · Information about storage in one common storage facility: Not required. · Further information about storage conditions: Keep receptacle tightly sealed. · Specific end use(s) No further relevant information available. * 8 Exposure controls/personal protection
· Control parameters
· Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
· Additional information: The lists that were valid during the creation were used as basis. · Exposure controls
· Appropriate engineering controls No further data; see section 7. · Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
· Breathing equipment: Not required.
(Contd. on page 4)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 366
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 3)
60.0.5 · Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection:
Tightly sealed goggles
* 9 Physical and chemical properties
· Information on basic physical and chemical properties · General Information
· Physical state Fluid
· Color: According to product specification
· Odor: Characteristic
· Odor threshold: Not determined.
· Melting point/Melting range: Undetermined.
· Boiling point/Boiling range: Undetermined.
· Flammability: Not applicable.
· Explosion limits:
· Lower: Not determined.
· Upper: Not determined.
· Flash point: >93.3 °C (>199.9 °F)
· Decomposition temperature: Not determined.
· pH-value: Not determined.
· Viscosity:
· Kinematic: Not determined.
· Dynamic: Not determined.
· Solubility in / Miscibility with
· Water: Not miscible or difficult to mix.
· Partition coefficient (n-octanol/water): Not determined. · Vapor pressure: Not determined.
· Vapor pressure:
· Density at 20 °C (68 °F): 1.13 g/cm³ (9.42985 lbs/gal) · Relative density Not determined.
· Vapor density Not determined.
· Particle characteristics Not applicable.
(Contd. on page 5)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 367
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 4)
60.0.5 · Other information
· Appearance:
· Form: Fluid
· Important information on protection of health and
environment, and on safety.
· Ignition temperature: Product is not selfigniting.
· Danger of explosion: Product does not present an explosion hazard. · Solvent content:
· VOC content: 0.00 %
0.0 g/l / 0.00 lb/gal
· Solids content: 0 %
· Change in condition
· Evaporation rate Not determined.
10 Stability and reactivity
· Reactivity No further relevant information available. · Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · Possibility of hazardous reactions No dangerous reactions known. · Conditions to avoid No further relevant information available. · Incompatible materials: No further relevant information available. · Hazardous decomposition products: No dangerous decomposition products known. * 11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
ATE (Acute Toxicity Estimate)
Oral LD50 3,125–8,333 mg/kg
· Primary irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for preparations:
Irritant
· Interactive effects No interactive effects between components are known. · Carcinogenic categories
· IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
· NTP (National Toxicology Program)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients is listed.
(Contd. on page 6)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 368
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 5)
60.0.5 · Alternative sources for toxicological information No non-standard sources for toxicological information where used. * 12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available. · Persistence and degradability No further relevant information available. · Bioaccumulative potential No further relevant information available. · Mobility in soil No further relevant information available. · Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects
· Additional ecological information:
· General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. * 13 Disposal considerations
· Waste treatment methods
· Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations. * 14 Transport information
· UN-Number
· DOT, IMDG, IATA not regulated
· UN proper shipping name
· DOT, IMDG, IATA not regulated
· Transport hazard class(es)
· DOT, ADN, IMDG, IATA
· Class not regulated
· Packing group
· DOT, IMDG, IATA not regulated
· Environmental hazards: Not applicable.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
· Special precautions for user Not applicable.
· UN "Model Regulation": not regulated
US
(Contd. on page 7)
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 369
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 6)
60.0.5 * 15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
· Hazardous Air Pollutants
None of the ingredients is listed.
· Proposition 65
· Chemicals known to cause cancer:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Carcinogenic categories
· EPA (Environmental Protection Agency)
None of the ingredients is listed.
· TLV (Threshold Limit Value)
None of the ingredients is listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health) None of the ingredients is listed.
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS). · Hazard pictograms
GHS07
· Signal word Warning
· Hazard statements
Causes skin irritation.
Causes serious eye irritation.
· Precautionary statements
Wash thoroughly after handling.
Wear protective gloves / eye protection / face protection.
If on skin: Wash with plenty of water.
Specific treatment (see on this label).
(Contd. on page 8)
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 370
Safety Data Sheet
acc. to OSHA HCS
Date of issue: 01/10/2025 Reviewed on 01/10/2025
Trade name: BD5405 Part B (Hardener)
(Contd. of page 7)
60.0.5 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
If eye irritation persists: Get medical advice/attention. · Chemical safety assessment: A Chemical Safety Assessment has not been carried out. 16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Department issuing SDS: Environment protection department. · Contact: -
· Date of previous version 01/10/2025
· Date of preparation 01/10/2025
· Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society) NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Skin irritation 2: Skin corrosion/irritation – Category 2 Eye irritation 2A: Serious eye damage/eye irritation – Category 2A · * Data compared to the previous version altered.
US
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 371
65268.00022\45163372.8
EXHIBIT F
EXHIBIT F
RULES AND REGULATIONS
Tenant shall faithfully observe and comply with the following Rules and Regulations. Landlord shall not be responsible to Tenant for the non-performance of any of said Rules and Regulations by or otherwise with respect to the acts or omissions of any other tenants or occupants of the Building. In the event of any conflicts between the Rules and Regulations and other provisions of this Lease, the latter shall control.
1. Landlord shall have the right to control and operate the public portions of the Building and the public facilities, as well as facilities furnished for the common use of the tenants, in such manner as it deems best for the benefit of the tenants generally.
2. No advertisements, pictures or signs of any sort shall be displayed on or outside the Premises or Building without the prior written consent of Landlord. This prohibition shall include any portable signs or vehicles placed within the parking lot, or on streets adjacent thereto for the purpose of advertising or display. Landlord shall have the right to remove any such unapproved item upon forty-eight (48) hours prior written notice and at Tenant’s expense.
3. Storage of forklift propane tanks, whether interior or exterior, shall be in secured and protected storage and enclosure approved by the local fire department and, if exterior, shall be located in areas specifically designated by Landlord. Tenant shall protect electrical panels and building mechanical equipment from damage from forklift trucks.
4. Machinery, equipment and apparatus belonging to Tenant which causes noise or vibration that may be transmitted to the structure of the Building to such a degree as to be objectionable to Landlord or other tenants or to cause harm to the Building, shall be placed and maintained by Tenant, at Tenant’s expense, on vibration eliminators or other devices sufficient to eliminate the transmission of such noise and vibration. Tenant shall cease using any such machinery which causes objectionable noise and vibration which cannot be sufficiently mitigated.
5. All goods, including materials used to store goods, delivered to the Premises shall be immediately moved into the Premises and shall not be left in parking or exterior loading areas overnight.
6. Tractor trailers which must be unhooked or parked with dolly wheels beyond the concrete loading areas must use steel plates or wood blocks of sufficient size to prevent damage to the asphalt paving surfaces. No parking or storage of such trailers will be permitted in the auto parking areas adjacent to the Premises or on streets adjacent thereto.
7. Tenant is responsible for the safe storage and removal of all pallets.
Pallets shall be stored behind screen enclosures at locations approved by Landlord.
8. Tenant shall not store or permit the storage or placement of merchandise in or around the areas surrounding the Premises. No displays or sales of merchandise shall be allowed in the parking lots or other exterior areas.
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 372
65268.00022\45163372.8
9. Tenant is responsible for the storage and removal of all trash and refuse.
All such trash and refuse shall be contained in suitable receptacles stored behind screen enclosures at locations approved by Landlord.
10. The toilet rooms, urinals, wash bowls and other apparatus shall not be used for any purpose other than that for which they were constructed and no foreign substances of any kind whatsoever shall be thrown therein. The expense of the repair of any breakage, stoppage or damage resulting from the violation of this rule shall be borne by the tenant who, or whose employees, agents, visitors or licensees shall have caused the same.
11. Tenant shall cooperate fully with Landlord to ensure the effective operation of the Building’s air conditioning systems. If Tenant’s use of the Premises creates noxious or objectionable fumes, vapors and/or odors, then Tenant shall provide proper ventilation equipment for the discharge of such fumes, vapors and odors to prevent them from entering into the air conditioning system or being discharged into other vents or flues of the building or annoying any of the other tenants of the Building or adjacent property. The design, location and installation of such equipment shall be subject to the Landlord’s approval.
12. All window coverings installed by Tenant and visible from the outside of the Building require the prior written approval of Landlord.
13. The sashes, sash doors, skylights, windows and doors that reflect or admit light or air into the halls, passageways or other public places in the Building shall not be covered or obstructed by Tenant.
14. Tenant shall not overload the floor of the Premises.
15. No awnings or other projections over or around the windows or entrances of the Premises shall be installed by any tenant without the prior written consent of Landlord.
16. Tenant shall not permit any animal, including, but not limited to, household pets (but excluding service animals, which are permitted), or bird to be brought or kept in or about the Premises or Building.
17. Tenant hereby acknowledges that Landlord shall have no obligation to provide guard service or other security measures for the benefit of the Premises or Building.
Tenant hereby assumes all responsibility for the protection of Tenant and its agents, employees, contractors, invitees and guests, and the property thereof, from acts of third parties, including keeping doors locked and other means of entry to the Premises closed.
18. No auction, liquidation, fire sale, going out of business or bankruptcy sale shall be conducted in or about the Premises without the prior written consent of Landlord.
19. No tenant shall use or permit the use of any portion of the Premises for living quarters, sleeping apartments or lodging rooms.
20. Tenant, Tenant’s agents, employees, contractors, licensees, or visitors shall not park any vehicles in driveways, service entrances, or areas posted as no parking.
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 373
65268.00022\45163372.8
21. If the Premises are or become infested with vermin as a result of the use or any misuse or neglect of the Premises by Tenant, its agents, employees, contractors, visitors or licensees, Tenant shall , at Tenant’s expense, cause the same to be exterminated from time to time to the satisfaction of Landlord by licensed exterminators as shall be approved in writing in advance by Landlord.
22. Tenant shall not use the name of the Building for any purpose other than as the address of the business to be conducted by Tenant in the Premises, nor shall Tenant use any picture of the Building in its advertising, stationary or in any other manner without the prior written permission of Landlord. Landlord expressly reserves the right at any time to change the name of the Building without incurring any liability to Tenant.
23. Tenant, its employees and agents shall not loiter in or on the entrances, corridors, sidewalks, lobbies, courts, halls, stairways, elevators, or vestibules of the Building for the purpose of smoking tobacco products or for any other purposes, nor in any way obstruct such areas, and shall use them only as a mean of ingress and egress from the Premises.
24. Landlord reserves the right to exclude from the Building any person who, in the judgment of Landlord, is intoxicated or under the influence of liquor or drugs, or who shall in any manner do any act in violation of these Rules and Regulations.
25. Landlord reserves the right at any time to change or rescind any one or more of these Rules and Regulations, or to make such other and further reasonable Rules and Regulations as in Landlord’s reasonable judgment may from time to time be necessary for the management, safety, care and cleanliness of the Premises, and Building, and for the preservation of good order therein, as well as for the convenience of other Building occupants and tenants.
Landlord may waive any one or more of these Rules and Regulations for the benefit of any particular tenant, but no such waiver by Landlord shall be construed as a waiver of such Rules and Regulations in favor of any other tenant, nor prevent Landlord from enforcing any such Rules and Regulations against any or to all tenants of the Building. Tenant shall be deemed to have read these Rules and Regulations and to have agreed to abide by them as a condition to its occupancy of the Premises.
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 374
65268.00022\45163372.8
EXHIBIT G
TENANT WORK LETTER
This Tenant Work Letter is attached to and made a part of that certain Lease Agreement by and between the CITY OF ALAMEDA, a charter city and municipal corporation (“Landlord”) and POSEIDON TECH CORPORATION, a Delaware corporation (“Tenant”) for premises located at 1190 West Tower Avenue, Alameda, California.
1. Tenant Work. Tenant, at Tenant’s sole cost and expense, shall design, permit, construct, install and complete all improvements, alterations, fixtures, equipment, systems, and related work necessary or desired for Tenant’s use and occupancy of the Premises, including the initial tenant improvement work. The Tenant Work is expected to include, subject to Landlord’s approval of final plans and specifications, the following general categories of work:
a. construction of office, conference, meeting, kitchen, breakroom, restroom, storage, and support areas;
b. installation of walls, drywall, doors, frames, glazing, ceilings, flooring, wall base, paint, millwork, counters, restroom accessories, appliances, and related finishes; c. plumbing improvements, including restroom fixtures, sinks, water heaters, domestic water, waste and vent piping, and related supports; d. fire sprinkler modifications and fire alarm / fire life safety work required for Tenant’s layout;
e. HVAC improvements, including rooftop package units, ducting, exhaust fans, controls, structural supports, curbs, and related roof penetrations and waterproofing approved by Landlord;
f. electrical improvements, including circuits, receptacles, lighting, floor boxes, controls, Title 24 compliance, and related commissioning; g. warehouse floor work;
h. data, telecommunications, security, furniture, fixtures, equipment, and Tenant’s operational equipment; and
i. all other work required for Tenant’s use, occupancy, permitting, code compliance, and operation of the Premises, together with any modifications approved by Landlord in writing pursuant to this Lease (collectively, the “Tenant Work”).
The Tenant Work includes, without limitation, Tenant’s office, research and development, light manufacturing and assembly improvements, restrooms, kitchen and break areas, HVAC distribution and rooftop equipment serving the Premises, plumbing, electrical, lighting, fire life safety modifications, finishes, appliances, warehouse floor work selected by Tenant, Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 375
65268.00022\45163372.8
data/telecommunications, security systems, furniture, fixtures, equipment, and all other work required for Tenant’s intended use. Tenant shall diligently prosecute the Tenant Work to completion in a good and workmanlike manner and in compliance with the Lease. Tenant’s inability to complete the Tenant Work, obtain permits, secure contractors, obtain materials, obtain utility service, obtain inspections, or obtain a certificate of occupancy shall not delay the Commencement Date, extend the Term, abate Rent, excuse Tenant’s obligations, or impose any liability on Landlord, except to the extent expressly provided otherwise in the Lease.
2. Plans and Approval. Before commencing any Tenant Work, Tenant shall submit to Landlord complete plans, specifications, drawings, engineering, contractor information, construction schedule, insurance certificates, and other materials required under Section 9 of the Lease or reasonably requested by Landlord. Landlord’s approval of the Tenant Work, which approval may not be unreasonably withheld or delayed, may be conditioned on, among other things, Landlord’s review of impacts to the Building structure, roof, building systems, exterior, utilities, parking areas, environmental conditions, historic or planning requirements, neighboring tenants, and future development or sale of the Property. Landlord’s approval shall be in Landlord’s proprietary capacity as landlord only. No approval by Landlord shall constitute approval by the City of Alameda in its regulatory capacity, nor shall it limit Tenant’s obligation to obtain all required permits, approvals, inspections, and certificates from applicable governmental authorities. Tenant shall not materially change the approved Tenant Work, plans, specifications, contractors, construction schedule, building systems, roof work, exterior work, utility work, or permitted use without Landlord’s prior written approval, which approval shall not be unreasonably withheld, conditioned or delayed. Any changes shall be subject to Section 9 of the Lease and this Tenant Work Letter. Within thirty (30) days after substantial completion of the Tenant Work, Tenant shall deliver to Landlord, in form reasonably satisfactory to Landlord:
a. final permit sign-offs and inspection approvals;
b. a copy of any certificate of occupancy or temporary certificate of occupancy; c. as-built plans in PDF and CAD format, if available;
d. unconditional lien waivers from Tenant’s general contractor and major subcontractors, evidence of payment of all contractors and supplies, and any applicable notices of completion; and
e. copies of warranties and operations manuals for building systems installed as part of the Tenant Work.
3. Permits; Code Compliance. Tenant shall, at Tenant’s sole cost and expense, obtain and maintain all permits, approvals, inspections, licenses, certificates, and governmental authorizations required for the Tenant Work and Tenant’s use and occupancy of the Premises, including any building permits, fire permits, use permits, environmental permits, utility approvals, accessibility approvals, and certificate of occupancy requirements. Tenant shall be solely responsible for compliance with all applicable laws, codes, ordinances, regulations, restrictions, permits, approvals, ADA requirements, fire and life safety requirements, Alameda Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 376
65268.00022\45163372.8
Point restrictions, environmental restrictions, and utility requirements applicable to the Tenant Work and Tenant’s use of the Premises.
4. Prevailing Wage. Tenant shall comply with Section 25.3 of the Lease and all applicable federal, state, and local labor requirements, including any applicable prevailing wage, apprenticeship, contractor registration, certified payroll, and related public works requirements.
Tenant shall be solely responsible for determining whether the Tenant Work, or any portion thereof, is subject to prevailing wage or other public works requirements. Tenant shall indemnify, defend, and hold Landlord and the Landlord Related Parties harmless from and against any claim, liability, penalty, cost, or expense arising from any failure or alleged failure to comply with such requirements.
5. Contractors; Insurance. Tenant shall cause all Tenant Work to be performed only by duly licensed, qualified, insured contractors approved by Landlord in accordance with the Lease.
Tenant shall require its contractors and subcontractors to maintain all insurance required by the Lease and any additional insurance reasonably required by Landlord. Tenant shall keep the Premises, Building, and Property free of all mechanics’ liens, stop notices, claims, and encumbrances arising from the Tenant Work. Tenant shall promptly remove or bond around any such lien, stop notice, claim, or encumbrance in accordance with the Lease.
6. Roof. Tenant shall not install any rooftop equipment, make any roof penetration, modify any roof flashing, perform any roof waterproofing, or perform any work affecting the Building roof, roof structure, drainage system, parapets, exterior walls, or rooftop access without Landlord’s prior written approval, which may be granted, conditioned, or withheld in Landlord’s sole discretion. Any rooftop equipment, RTUs, curbs, structural supports, penetrations, flashing, waterproofing, and related work installed by or for Tenant shall be part of the Tenant Work and shall be performed at Tenant’s sole cost and expense by contractors approved by Landlord.
Tenant shall be responsible for any damage, leakage, water intrusion, warranty impairment, structural issue, or other condition caused by or resulting from Tenant’s rooftop equipment, roof penetrations, contractors, or Tenant Work. Nothing in this Tenant Work Letter shall require Landlord to repair, restore, waterproof, or replace the Building roof, except to the extent expressly provided in Section 10.4 of the Lease.
7. Ownership and Removal. All Tenant Work that is permanently affixed to the Premises or constitutes building systems or base-building improvements, including restrooms, plumbing, electrical distribution, HVAC distribution, rooftop equipment curbs and supports, fire life safety systems, walls, doors, glazing, ceilings, and other permanently installed improvements, shall become Landlord’s property upon installation and shall remain in the Premises at the expiration or earlier termination of the Lease, unless Landlord requires removal in accordance with the Lease. Tenant’s trade fixtures, furniture, equipment, aircraft, manufacturing equipment, computers, servers, data/telecommunications equipment, security systems, movable appliances, and personal property shall remain Tenant’s property and shall be removed by Tenant at the expiration or earlier termination of the Lease, unless Landlord agrees otherwise in writing.
Tenant shall repair all damage caused by removal of Tenant’s property, trade fixtures, equipment, or any Tenant Work required by Landlord to be removed.
Docusign Envelope ID: 18624A2E-3496-860F-815E-02847CC36CC5 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 377
F Polution Y EVS-081441-00 10/01/2026 10/01/2027
Business Interruption Limit $783,000
The certificate holder will be provided a 30 day Notice of Cancellation or 10 day for Non-payment of premiums The City of Alameda is named as an Additional Insured, and provided a Waiver of Subrogation where applicable.
Homesite Insurance Company
Y
004
1190 W Tower Avenue
Alameda CA 94501
14 14
Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 10/5/2026
378
DA-6Z04a (06/14) Page 1 of 1
AUTOMATIC ADDITION AL INSURED ENDORSEMENT
AUTOMATIC ADDITIONAL INSURED ENDORSEMENT
Named Insured POSEIDON AEROSPACE, INC Endorsement Number Policy Symbol
CAL
Policy Number
H25326015
Policy Period
07/23/2026 TO 07/23/2027
Effective Date of Endorsement
07/23/2026
Issued By (Name of Insurance Company)
ACE American Insurance Company
Insert the policy number. The remainder of the information is to be completed only when this endorsement is issued subsequent to the preparation of the policy.
THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY.
This endorsement modifies insurance provided under the following:
BUSINESS AUTO COVERAGE FORM
MOTOR CARRIER COVERAGE FORM
SECTION II - LIABILITY COVERAGE, WHO IS AN INSURED is amended to include as an "insured" any person or organization you are required in a written contract or agreement to name as an Additional Insured on your policy but only for "bodily injury" or "property damage" to which this insurance applies if the "accident" is caused by:
1. You, while using a covered “auto” or
2. Any other person, while using a covered “auto” with your permission.
The insurance provided by this endorsement shall be subject to the following additional condition:
1. The Limit of Insurance provided for the Additional Insured shall not be greater than those required by contract and, in no event, shall the policy Limits of Insurance be increased by the contract. 2, All insuring agreements, exclusions, terms and conditions of the policy shall apply to the coverage (s) provided to the Additional Insured, and such coverage shall not be enlarged or expanded by reason of the contract.
3. Coverage provided by this endorsement shall be excess over any other valid and collectible insurance available to the Additional Insured (s) whether primary, excess, contingent or on any other basis unless the contract specifically requires that this insurance be primary or you request that it apply on a primary basis prior to loss.
Authorized Representative
075
Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 379
CALIFORNIA ADDITIONAL INSURED -
DESIGNATED PERSON OR ORGANIZATION II
This endorsement modifies insurance provided under the following:
AVIATION GENERAL LIABILITY COVERAGE FORM
Schedule
Name of Additional Insured Person(s) or Organization(s):
The City of Alameda, its City Council, boards, commissions, officials, employees, agents, and volunteers, 2263 Santa Clara Ave, Alameda, CA 94501
Information required to complete this Schedule, if not shown above, will be shown in the Declarations.
SECTION II - WHO IS AN INSURED is amended to include as an additional insured the person(s) or organization(s) shown in the Schedule, but only with respect to liability arising out of your aviation operations.
All other policy terms and conditions remain unchanged.
Includes copyrighted material of Insurance Services Office, Inc., with its permission.
AV 41 90 03 15
AV 41 90 03 15
(Page 1 of 1)
Named Insured: Poseidon Aerospace, Inc. Effective Date of Endorsement: 07/14/2026 Policy Number: AP F560786 00 00 Endorsement Number: 00
THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY.
R * 30 * 07/28/2026 * AP F560786 00 00 Great American Insurance Company 190451
Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 380
INSURER(S) AFFORDING COVERAGE NAIC #
INSURER F :
INSURER E :
INSURER D :
NAME: CONTACT
INSURER C :
INSURER B :
(A/C, No): FAX
E-MAIL ADDRESS: CUSTOMER ID: PRODUCER
PRODUCER
(A/C, No, Ext): PHONE
INSURED INSURER A :
The ACORD name and logo are registered marks of ACORD
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS
CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.
LOCATION OF PREMISES / DESCRIPTION OF PROPERTY (Attach ACORD 101, Additional Remarks Schedule, if more space is required) CERTIFICATE NUMBER: REVISION NUMBER:
THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS
CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.
COVERAGES
$
$ BOILER & MACHINERY / EQUIPMENT BREAKDOWN
$
$
$ TYPE OF POLICY CRIME
POLICY NUMBER
$
$
$
$ NAMED PERILS CAUSES OF LOSS
INLAND MARINE TYPE OF POLICY
$
RENTAL VALUE CONTENTS
BUILDING
DEDUCTIBLES
WIND
$
$
$
$
$
$
$
$
$
BLANKET BLDG & PP
BLANKET PERS PROP
BLANKET BUILDING
EXTRA EXPENSE
BUSINESS INCOME
PERSONAL PROPERTY
BUILDING
FLOOD
EARTHQUAKE
SPECIAL BROAD
BASIC
CAUSES OF LOSS
PROPERTY
POLICY EXPIRATION
DATE (MM/DD/YYYY) POLICY EFFECTIVE DATE (MM/DD/YYYY)
INSR
LTR TYPE OF INSURANCE POLICY NUMBER COVERED PROPERTY LIMITS $
$
SPECIAL CONDITIONS / OTHER COVERAGES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) © 1995-2015 ACORD CORPORATION. All rights reserved.
ACORD 24 (2016/03)
AUTHORIZED REPRESENTATIVE
SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE
THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.
CANCELLATION
CERTIFICATE OF PROPERTY INSURANCE DATE (MM/DD/YYYY)
CERTIFICATE HOLDER
10/01/2026 Aviation Technology Insurance Services, Inc. 4000 Bridgeway, Suite 207 Sausalito CA 94965 Scott Gault 415-275-7612 [email protected] Poseidon Tech Corporation 1190 W. Tower Avenue Alameda CA 94501 Travelers Property Casualty Company of America 25674 001 Policy Location 2 / Building 2: 1190 W. Tower Avenue, Alameda, CA 94501. Occupancy: Your Business Personal Property - aircraft parts. Covered property: Business Personal Property, Business Income and Extra Expense. Inland Marine Equipment and Tools. A $2,500 Excluded $2,500 $2,500 KTJ-630-D3135999-TIL-26 07/23/2026 07/23/2027 783,000 Included 1,260,000 Flood (Ann Agg) 5,000 Employee Tools 75,000 A SPECIAL Misc. Property Floater KTJ-630-D3135999-TIL-26 07/23/2026 07/23/2027 Equip & Tools 100,000 Deductible 2,500 The City of Alameda, its City Council, boards, commissions, officials, employees, agents and volunteers 2263 Santa Clara Avenue Alameda CA 94501 Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 381
Poseidon Tech Corporation — Alameda Property Schedule
Listed property items over $5,000
Location: 1190 W Tower Ave, Alameda, CA 94501
Policy reference: KTJ-630-D3135999-TIL-26
Model # Serial # Description Estimated value (USD)
Invision 352 MA460254A Miller Invision 352 MPa Welder $24,500 7FBEU20 17347 Toyota Electric Forklift $7,750
FL25-C CLG2000ZTMT870599 2022 Phoenix Motorcars Forklift $10,000 S4732E S4732E-O4-171101638 2017 Snorkel Scissor Lift $8,500 1930 ES 200259598 2016 JLG Scissor Lift $5,250
SH-5216A 49642 2026 Baleigh Sheet metal shear $11,000
BB-4814 25120028 2026 Baleigh Sheet metal break $6,115
CL3.0 25110303 2025 Jinan PLK Spider Crane $25,000
KR 340 R3400-2 4589716 2026 Kuka Robot Arm $86,900
V-26 FURB38 2018 Dake Vertical Bandsaw w/ Welder $18,000 Form 4L Form4L-Calmfish 2026 Fromlabs Resin Printer $7,200 STM2045C-4A ST2025082M STM CNC $35,000
VF-4SS 32619 HAAS CNC $20,000
Internal Part # R/D00003-001 Heron Mold - Fuselage Left Side $107,000 Internal Part # R/D00001-001 Heron Mold - Fuselage Right Side $107,000 Internal Part # R/D00004-001 Egret Mold - Fuselage Left Side $107,000 Internal Part # R/D00002-001 Egret Mold - Fuselage Right Side $107,000 0438C002 93910076 CN20x50 IAS H/P1 Lens $82,400
710-0345 VRPX2000101 RED V Raptor S35 Camera $18,000
C2560-60L150-F C1260E240149 OConnor Ultimate 2560 Fluid Head & 60L 150mm Bowl Tripod $24,500 ILME-FX6V 2502675 Sony FX6 Full-Frame Cinema Camera $7,600 Total estimated value $825,715
Docusign Envelope ID: 0770A90D-3A7E-80AE-8206-7662CFD9C9A0 382