Agenda packet — Bell Gardens City Council, October 23, 2023 (part 5 of 7)

DTSC appreciates your consideration and approval of previous encroachment requests for activities performed at the Site. If you have any questions or comments, please contact Ms. Farah Itani, Project Manager, at (714) 484-5471, or by e-mail at Farah. t i _ ts. ov, or me at (714) 484-5432 or by e-mail at Emad.emut dtsc.ca.gov.

Sincerely,
Emad Ye' t, P.E.

Unit Chief
Brownfields Restoration and School Evaluation Branch
Site Mitigation and Restoration Program
mm/fi/ey
CC' (via e-mail)
Ms. Samantha Curtis, PG
Senior Geologist
GSI Environmental Inc.
scurtis(o)gsienv.com
Mr. Monther Taifour
Project Engineer
National Engineering and Consulting Group Inc.
mtaifour(o)groupnec.com
Ms. Isabella Suarez
Assistant Engineering Geologist
National Engineering and Consulting Group Inc.
isuarez(o)groupnec.com
Dr. Scarlett Zhai
Project Manager
DTSC/Brownfields Restoration and School Evaluation
Scarlett.Zhai(o)dtsc.ca.gov
18MSTiF:11W1T
Hazardous Substances Engineer
DTSC/Brownfields Restoration and School Evaluation Branch Farah. Itani(o)dtsc.ca.gov
Exhibit 2 722

OF LOSS,�

ENVIRONMENTAL HEALTH
CL7IihPof"N iYF LCDS iSMMES
I QFO X Drinking Water Program Public Health
5050 Commerce Drive, Baldwin Park, CA 91706
Telephone: (626) 430-5420 • Facsimile: (626) 813-3013 • Email: [email protected] http://publichealth.lacounty.gov/eh/ep/dw/dw main.htm
wom Tian Approval

WORK SITE ADDRESS CITY ZIP EMAIL ADDRESS FOR WELL PERMIT APPROVAL 6358-019-028 Bell Gardens 90201 1 kkgrochocki(a,gsi-net.com

NOTICE,
• WORK PLAN APPROVALS ONCE GRANTED, ARE VALID FOR 180 DAYS. 30 DAY EXTENSIONS OF WORK PLAN APPROVALS ARE CONSIDERED ON AN INDIVIDUAL (CASE -BY -CASE) BASIS AND MAY BE SUBJECT TO ADDITIONAL PLAN REVIEW FEES (HOURLY RATE AS APPLICABLE). • WORK PLAN MODIFICATIONS MAY BE REQUIRED IF WELL AND GEOLOGIC CONDITIONS ENCOUNTERED AT THE SITE INSPECTION ARE FOUND TO DIFFER FROM THE SCOPE OF WORK PRESENTED TO THE DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM. • POTENTIAL APPROVALS ARE LIMITED TO COMPLIANCE WITH THE CALIFORNIA WELL STANDARDS AND THE LOS ANGELES COUNTY CODE AND DOES NOT GRANT ANY RIGHTS TO CONSTRUCT, RENOVATE, OR DECOMMISSION ANY WELL. THE APPLICANT IS RESPONSIBLE FOR SECURING ALL OTHER

NECESSARY PERMITS SUCH AS WATER RIGHTS, PROPERTY RIGHTS, COASTAL COMMISSION OR WATERMASTER APPROVALS, USE COVENANTS, ENCROACHMENT PERMISSIONS, UTILITY LINE SETBACKS, CITY/COUNTY PUBLIC WORKS RIGHTS OF WAY, ETC. • THIS PERMIT IS NOT COMPLETE UNTIL ALL OF THE FOLLOWING REQUIREMENTS ARE SIGNED BY THE DEPUTY HEALTH OFFICER. WORK SHALL NOT BE INITIATED WITHOUT A WORK PLAN APPROVAL STAMPED BY THE DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM. • ONCE APPROVED NOTIFY INSPECTOR AT ABSANTOS(&PH. LA COUNTY. GOV 3 BUSINESS GAYS BEFORE WORK IS SCHEDULED TO BEGIN.

TO BE COMPLETED BY DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM:

WORK PLAN APPROVED FOR:

PERMIT SR0328934 DATE: March 9, 2023
Monitoring Well Construction NUMBER:

ADDITIONAL APPROVAL CONDITIONS:

March 9, 2023
• Work plan approval issued for the construction of one monitoring wells (MW-19B) located at 6358-019-028 Bell Gardens, CA 90201. Follow all applicable requirements published in the California Well Standards (Bulletins 74-81 and 74-90) and the Los Angeles County Code, Title 11.
• The annular space for all wells is to be a minimum of 2-inches in diameter, the annular seal is to be a minimum of 20-feet in depth and to be sealed per the California Well Standards Bulletin 74-90: cement grout mix ratio of 5 to 6 gallons of water per 94- pound bag of Portland cement and up to 6 percent of Bentonite may be added to the cement -based mix. The seal is to be installed via a tremie pipe under pressure from the bottom of the boring to grade. NO BENTONITE OR HYDRATED BENTONITE CHIPS.
• Maintain all set back requirements as stated in the California Well Standards Bulletin 74-90. The annular seal is to be witnessed by a Drinking Water Inspector, please schedule accordingly. • Please provide a copy of the well completion report within 60 days from the date of construction/destruction of well. Driller shall submit the well completion report to the Department of Water Resources at httg//civicnetresources,cagoy/DWRWELLS.

APPROVED BY:

Abraham Santos
v°^
REHS Environmental Health Specialist III
Drinking Water Program
Environmental Health Protection Division
Los Angeles County Department of Public Health
r u^
5050 Commerce Drive
Baldwin Park, CA 91706
Ph (626) 430 - 5420
[email protected]
❑ ANNULAR SEAL FINAL INSPECTION REQUIRED
❑ WELL COMPLETION LOG REQUIRED
DATE ACCEPTED: REHS signature DATE ACCEPTED: REHS signature 9 9
Exhibit 2 723

OF LOS q�C

N ENVIRONMENTAL HEALTH
r
CaurnTe err iLtrs AMC�IFL£5
TM`�gL�FOaNP Drinking Water Program Public IMES
5050 Commerce Drive, Baldwin Park, CA 91706
Telephone: (626) 430-5420 • Facsimile: (626) 813-3013 • Email: [email protected] http://publichealth.lacounty.gov/eh/ep/dw/dw main.htm
w om Tian Approval

WORK SITE ADDRESS CITY ZIP EMAIL ADDRESS FOR WELL PERMIT APPROVAL 6358-017-909 Bell Gardens 90201 1 kkgrochocki(a)g i-net.com NOTICE:
• WORK PLAN APPROVALS ONCE GRANTED, ARE VALID FOR 180 DAYS. 30 DAY EXTENSIONS OF WORK PLAN APPROVALS ARE CONSIDERED ON AN INDIVIDUAL (CASE -BY -CASE) BASIS AND MAY BE SUBJECT TO ADDITIONAL PLAN REVIEW FEES (HOURLY RATE AS APPLICABLE). • WORK PLAN MODIFICATIONS MAY BE REQUIRED IF WELL AND GEOLOGIC CONDITIONS ENCOUNTERED AT THE SITE INSPECTION ARE FOUND TO DIFFER FROM THE SCOPE OF WORK PRESENTED TO THE DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM. • POTENTIAL APPROVALS ARE LIMITED TO COMPLIANCE WITH THE CALIFORNIA WELL STANDARDS AND THE LOS ANGELES COUNTY CODE AND DOES NOT GRANT ANY RIGHTS TO CONSTRUCT, RENOVATE, OR DECOMMISSION ANY WELL. THE APPLICANT IS RESPONSIBLE FOR SECURING ALL OTHER

NECESSARY PERMITS SUCH AS WATER RIGHTS, PROPERTY RIGHTS, COASTAL COMMISSION OR WATERMASTER APPROVALS, USE COVENANTS, ENCROACHMENT PERMISSIONS, UTILITY LINE SETBACKS, CITY/COUNTY PUBLIC WORKS RIGHTS OF WAY, ETC. • THIS PERMIT IS NOT COMPLETE UNTIL ALL OF THE FOLLOWING REQUIREMENTS ARE SIGNED BY THE DEPUTY HEALTH OFFICER. WORK SHALL NOT BE INITIATED WITHOUT A WORK PLAN APPROVAL STAMPED BY THE DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM. • ONCE APPROVED NOTIFY/NSPECTOR AT ABSANTOSa-PH.LACOUNTY.GOV 3 BUSINESS DAYS BEFORE WORK IS SCHEDULED TO BEGIN.

TO BE COMPLETED BY DEPARTMENT OF PUBLIC HEALTH —DRINKING WATER PROGRAM:

WORK PLAN APPROVED FOR:

PERMIT SR0328935 DATE:: March 9, 2023
Monitoring Well Construction NUMBER:

ADDITIONAL APPROVAL CONDITIONS:

March 9, 2023
• Work plan approval issued for the construction of one monitoring wells (MW-20B) located at 6358-017-909 Bell Gardens, CA 90201. Follow all applicable requirements published in the California Well Standards (Bulletins 74-81 and 74-90) and the Los Angeles County Code, Title 11.
• The annular space for all wells is to be a minimum of 2-inches in diameter, the annular seal is to be a minimum of 20-feet in depth and to be sealed per the California Well Standards Bulletin 74-90: cement grout mix ratio of 5 to 6 gallons of water per 94- pound bag of Portland cement and up to 6 percent of Bentonite may be added to the cement -based mix. The seal is to be installed via a tremie pipe under pressure from the bottom of the boring to grade. NO BENTONITE OR HYDRATED BENTONITE CHIPS.
• Maintain all set back requirements as stated in the California Well Standards Bulletin 74-90. The annular seal is to be witnessed by a Drinking Water Inspector, please schedule accordingly. • Please provide a copy of the well completion report within 60 days from the date of construction/destruction of well. Driller shall submit the well completion report to the Department of Water Resources at http://civ-icnet.resources_ca.gov-/DWRWELLS APPROVED BY:

Abraham Santos
44 REHS Environmental Health Specialist III
Drinking Water Program
Environmental Health Protection Division
Los Angeles County Department of Public Health
5050 Commerce Drive
r ��s
Baldwin Park, CA 91706
Ph (626) 430 - 5420
[email protected]
❑ ANNULAR SEAL FINAL INSPECTION REQUIRED
❑ WELL COMPLETION LOG REQUIRED
DATE ACCEPTED: REHS signature DATE ACCEPTED: REHS signature 9 9
Exhibit 2 724

From: Abraham Santos
Subject: RE: 5550 - JS Chrome Monitoring Well MW-20B installation permit I
You don't often get email from absantos(
;"
Good Morning,
An extension has been granted 90 days from the date of the original expiration. The new date of expiration for this permit is December 4, 2023.

Thank You,
Abraham Santos
Exhibit 2 725

EXHIBIT "C"

HEALTH AND SAFETY PLAN
Exhibit 2 726

'
HEALTH AND SAFETY PLAN:

J&S CHROME PLATING COMPANY AND FORMER CHROME

CRANKSHAFT COMPANY
6863 and 6845 East Florence Place
Bell Gardens, California 90201
Issued: September 14, 2022
Prepared by: GSI ENVIRONMENTAL INC.
7595 Irvine Center Drive, Suite 250
Irvine, California 92618
949.679.1070
.,,, slienv.com
GSI Project No. 5550

GSI Job No.: 5550
Issued: September 14, 2022
e e e e
III Ilr IICne P-latihing CornpainyInd Fainirneir Chrorne Crankshaft Company
6863 IIId 684-5 I Florence l-place
1136111 Gardens, 1
Revision Lo
®®EMMMMMMMM1=
Plan Prepared By:

Konrad Grochocki Date: 9/9/2022
Plan Reviewed By:

Tiam Novin
Date:
9/14/2022
Plan Reviewed B
Samantha Curtis
Date:
9/14/2023
Approved By:
9/14/23 Veirslion to Ifbe Updated Il:::Iidoir to Il::::lielld ([:::::vent
Samantha Curtis, PG
Senior Geologist
Exhibit 2 728

1.0 SCOPE AND APPLICATION...............................................................................................1

2.0 PROJECT DESCRIPTION...................................................................................................2

2.1 Site Description.............................................................................................................2

2.2 Project Tasks................................................................................................................3

2.2.1 Site Monitoring Activities.......................................................................................3

2.2.2 Groundwater Monitoring.......................................................................................3

2.2.3 Groundwater Monitoring Well Installation.............................................................4

2.2.4 Vadose Zone Soil Sampling.................................................................................4

2.2.5 Waste Disposal....................................................................................................5

3.0 EMERGENCY RESPONSE PROCEDURES.......................................................................6

3.1 Emergency Contacts.....................................................................................................6

3.2 Site Siren or Alarm Signals...........................................................................................6

3.3 Emergency Assembly Area(s) and Evacuation Route...................................................6

3.4 Applicable Emergency Response Measures and Facilities............................................6

4.0 PROJECT ORGANIZATION, PERSONNEL, & TRAINING REQUIREMENTS ....................8

4.1 Training Requirements..................................................................................................8

4.2 Requirements for Respirator Use..................................................................................8

4.3 Personnel Documents...................................................................................................8

5.0 POTENTIAL HAZARDS AND HAZARD CONTROL MEASURES......................................9

5.1 General Site Access Control Measures.........................................................................9

5.2 Project Personnel Access Control.................................................................................9

5.3 Underground Utilities Clearance....................................................................................9

5.4 General Work Hazards and Avoidance.......................................................................10

5.4.1 Housekeeping Measures...................................................................................10

5.4.2 General Safe Work Practices.............................................................................10

5.4.3 Fire and Explosion Hazard Mitigation.................................................................10

5.4.4 Other Measures (check as applicable)...............................................................10

5.4.5 Heat -Related Disorders......................................................................................11

5.4.6 Heavy Equipment Operations............................................................................11

5.4.7 Confined Space and Excavation Safety.............................................................12

5.4.8 COVID-19..........................................................................................................12

5.4.9 Potential Chemical Exposure Hazards...............................................................13

5.4.10 Other Potential Hazards...............................................................................14

6.0 AIR QUALITY MONITORING............................................................................................15

6.1 Air Monitoring Instrument ...............................

6.2 Monitoring Frequency and Location ...............

6.2.1 SCAQMD Rule 1166 .............................
.............................................................15 .............................................................15 ..........................................................15 J&S Chrome Plating Company and Former Chrome
Crankshaft Company
Exhibit 2 729
Health and Safety Plan

6.2.2 SCAQMD Rule 1466..........................................................................................15

7.0 PERSONAL PROTECTIVE EQUIPMENT (PPE) ...............................................................16

7.1 Level D PPE................................................................................................................16

7.2 Supplemental Level D PPE.........................................................................................16

7.3 Level C PPE................................................................................................................16

7.4 Level B PPE................................................................................................................16

8.0 DECONTAMINATION PROTOCOL...................................................................................17

9.0 ADDITIONAL INFORMATION...........................................................................................18

EXHIBITS
Exhibit A: GSI Personnel Acknowledgement............................................................................. iii
Exhibit B: Non-GSI Personnel Acknowledgement
..................................................................... iv Exhibit 3.1: Emergency Contacts.............................................................................................. 6 Exhibit 3.4: Emergency Facilities.............................................................................................. 7 Exhibit 5.3: Utility Color Designations........................................................................................ 9 Exhibit 5.4.5a: Heat Related Disorders....................................................................................11 Exhibit 5.4.5b: Heat Risk Levels...............................................................................................11 Exhibit 5.4.8: Chemical Exposure Hazard Levels.....................................................................13

FIGURES
Figure 1. Site Map
Figure 2. Urgent Care Map
Figure 3. Hospital Map

ATTACHMENTS
Attachment 1. Daily Site Safety Record
Attachment 2. NIOSH Pocket Guides
Attachment 3. Chemical Safety Data Sheets
J&S Chrome Plating Company and Former Chrome ii
Crankshaft Company
Exhibit 2 730
Health and Safety Plan

GSI Job No.: 5550
Issued: September 14, 2022
Site Specific Health and Safety Plan
J&S Chrome Plating Company and Former Chrome Crankshaft Company 6863 and 6845 East Florence Place
Bell Gardens, California 90201
I, the undersigned, have been provided with a copy of this Site -Specific Health and Safety Plan.

Non-GSI Personnel Present (use next page).

J&S Chrome Plating Company and Former Chrome iii Health and Safety Plan Crankshaft Company
Exhibit 2 731

I have read the Plan, have attended a project safety orientation session conducted by GSI Environmental Inc. (GSI), and have had the opportunity to ask questions about health and safety issues relating to this project. I understand that it is my responsibility to abide by this Plan, and that physical injury, damage and other harm to myself or others could result from my failure to do so. I also understand that by signing this Site -Specific Health and Safety Plan, GSI is not my supervisor or controlling contractor; and therefore, is not responsible for my health and safety, as my employer is solely responsible for my health and safety.

Note: Non-GSI personnel include, but not limited to, GSI-subcontractors, V party subcontractors, clients, site representatives, and/or regulatory representatives.

J&S Chrome Plating Company and Former Chrome iv Health and Safety Plan Crankshaft Company
Exhibit 2 732

GSI Job No.: 5550
Issued: September 14, 2022
1 „0 C ID III.....!A II4111) A II°1III°1I1,,,,,IIIC "'UIII II4 This Site -Specific Health and Safety Plan (SS -HASP) has been prepared in accordance with 29 CFR §1910.120, 8 CCR 5192, and is a site -specific supplement to the GSI company Environmental, Health and Safety (EHS) Program Manual for Field Operations (the "EHS Program Manual"), which specifies GSI's general health and safety policies and procedures. This SS -HASP is to be provided to all site workers under the direction of GSI for their review. In addition, this SS -HASP, the GSI EHS Program Manual, and applicable client safety guidelines will remain on -site at all times during the project, and will be available to all project personnel upon request from the GSI Site Safety Officer (SSO) or other designated representative.

This SS -HASP specifies health and safety protocol to be followed during implementation of the project work scope by all site personnel under the direction of GSI, including employees and subcontractors. In the event of conflicting standards between this plan or the GSI EHS Program Manual and client health and safety requirements, the more protective standard shall apply. All personnel are required to comply with this SS -HASP and to indicate their agreement to do so by signing the cover page.

J&S Chrome Plating Company and Former Chrome 1 Health and Safety Plan Crankshaft Company
Exhibit 2 733

GSI Job No.: 5550
Issued: September 14, 2022
2„0 III°1 III III.....! C "' IIf;� III.....! C III III III° "'FIII II4 Name: J&S Chrome Plating Company and Former Chrome Crankshaft Company Address: 6863 and 6845 East Florence Place
City: Bell Gardens
County: Los Angeles
State: California
Zip Code: 90201
Site Owner/Client: Department of Toxic Substances Control DTSC Client Contact: Farah Itani
Business Address: 5796 Corporate Avenue
Cypress, California 90630-4732
Business Phone: 714-484-5471
Business Email: Farah.ltani a-)dtsc.ca.aov
2„1 Site 11I)escription
The former J&S Chrome Plating and Chrome Crankshaft facilities (Site) consist of two adjacent properties located at 6845 & 6863 Florence Place, Bell Gardens, California 90201. The Site was formerly used for electroplating operations (Crankshaft) from 1963 to 1991 and metal plating operations (J&S Chrome) in Bell Gardens, California. The Site is currently surrounded by mixed commercial and residential properties. Two schools are located within 1/8th mile to the west of the Site.

Previous environmental investigations have been conducted (Geomatrix 2007) at the Site and have identified chemicals of potential concern (COPCs). Previous investigations found metals (cadmium, hexavalent chromium, and lead) in soil and metals (cadmium, chromium, and hexavalent chromium), trichloroethylene (TCE), and tetrachloroethylene (PCE) in groundwater at the Site.

For the implementation of site remediation activities, the Site was divided into two operable units (OUs). OU-1 addresses soil on Site, and OU-2 addresses impacted groundwater beneath and downgradient of the Site. Historical remediation activities at the Site included excavation of chrome VI -impacted soils, injection of calcium polysulfide (CPS) into the vadose zone, and groundwater extraction, treatment, and re -injection with CPS. The current groundwater monitoring well network being sampled at the Site consists of the wells included below.

An aerial photo base map with approximate monitoring well locations (on- and off -Site) are shown on the attached Site plan (Figure 1).

J&S Chrome Plating Company and Former Chrome 2 Health and Safety Plan Crankshaft Company
Exhibit 2 734

GSI Job No.: 5550
Issued: September 14, 2022
dell ID Type
Well IID
Type
Well IC
Type
Well Ili
Type
Well ID Type
EL2-01-EW
EW
BGIVIW-1 �CW.. EIL3-1 EMW
EL2-01-0
IW
I PW-7B DW
BGM1W-2 CW
EL3-2
EMW
EL2-02-0
IWV
CCMW-12B DW
EL2-02-EW
EW
BGMW-3 CW
EL3-3
EMW
EL2-03-EW
EW
EL3-0177
77 MW-15B DW'
BGMW-4 CW
EL34
EMW'
EL2-04-EW
EW'
EL3-02-1W
IW
BGMW-5 CW
EL3-5
EMW
EL2-05-IE'u'WW
EW
EL3-03-IW
I'N
BGIWW-6 CW
EL4-1
EMW
EL2-06-EW
EW
EL;3-04-IW
I'N
EL2-07-EW
EW
BGMW-7 CW
EL4-2
EMW
EL4-01-IW
IW
EL3-01-EW
EW
BGMW-9 CW EL4-3 EMW
EL4-02-IW'J
I'N
I GMwW-10 CW
EL5-1
EMW
EL3-02-IEW
EW
EL4-03-IWW
I'N
JSMW-12 CW
EL6-2
EMW
EL3-03-I W
EW
EI-5-01-0
IW
,J MW-13 CW
EL5 3
EMW
EL3 04 EWW
EW
EL5 02 IW
IW
EL3-05-E'VW
EW
EL5-03-IW
IW
Acronyms:

MW'u' = Monitoring Well
EL4-01-EWW
EW
EL5-04-IW
IW
EL4 02-IEW
EW
EL4-03-IEWW
EW
CW = Compliance Well
IW = InOction Well
EL4-04-IEWW
EW
EW - Extraction Well
EL5-01-EW
EW
EMW =Elem;entMon itoring VVell
EL5-02-EW
EW
DW = Deep Well
EL5-03-IEW
EW
EL5-04-IEW
EW
EL5-05-IEW
EW
2„2 PIr eCt ° 'asks
Work to be conducted at the Site includes groundwater sampling, groundwater monitoring well installation and soil sampling from borings.
. .1 Site Monitoring Activities
A monthly Site inspection is conducted by walking the site, opening any well boxes with suspected damage to assess damage, noting the state of weed abatement, inspecting fences, locks, and the state of housekeeping, monitoring for unauthorized entry and reporting unauthorized entry of activities to the Bell Garden Police Department.

2.2.2 Groundwater Monitoring
Groundwater monitoring is conducted from existing wells on a semi-annual basis. Further, additional groundwater monitoring events will be conducted from select wells upon completion of the Phase I, on -Site, monitoring well installation activities and the Phase II, off -Site, monitoring well installation activities.

At the initiation of each monitoring event, wells will be measured for their depth to water (DTW) relative to the surveyor notch on the well casing. DTW measurements will be collected in the order of least VOC concentration to highest VOC concentration. Before collecting DTW measurements, the well box and the well cap will be removed, and the well will be allowed time to equilibrate.

Monitoring wells will then be purged and sampled using a stainless -steel submersible pump with dedicated poly tubing at a low -flow purge rate. Following sampling at each well, well boxes will be closed and secured, and all reusable sampling equipment will be decontaminated between well locations.

During the recent previous groundwater monitoring activities at the Site, most wells were found to be dry. Some wells contained enough groundwater to gather DTW measurements but J&S Chrome Plating Company and Former Chrome 3 Health and Safety Plan Crankshaft Company
Exhibit 2 735

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
insufficient water column for purging and sampling. Therefore, WDR required sampling was not completed in 2019.

2.2.3 Groundwater Monitoring Well Installation
tion
Borings for the groundwater monitoring wells will be advanced by a C-57 licensed subcontractor using roto sonic or hollow stem auger drilling methods. Soil cores will be collected continuously from ground surface to the total boring depth. Soil will be examined for general characteristics, screened for organic soil vapors using a photo -ionization detector (PID), and logged in accordance with the American Society for Testing Materials (ASTM) standard D 2488 following the Unified Soil Classification System (USCS).

Up to ten soil samples per boring will be collected and analyzed to assess impacts from COCs.

Samples will be collected at approximately 5-foot increments between the depths of 75 and 105 feet below ground surface (bgs) for analysis and to evaluate the effectiveness of CPS injection within this depth interval. Sample collection depths may vary based on field observations and soil screening with a PID. Soil samples will be collected and placed in laboratory provided containers, sealed in plastic bags, and stored in a cooler with ice under chain -of -custody protocols. The soil samples will be transported to a California Environmental Laboratory Accreditation Program (ELAP) certified laboratory. The soil samples will be analyzed for Title 22 metals by United States Environmental Protection Agency (U.S. EPA) Method 6010B, and hexavalent chromium (Cr [VI]) by U.S. EPA method 7199. If elevated PID readings (greater than 10 parts per million [ppm]) are observed, the sample will be analyzed for volatile organic compounds (VOCs) using U.S. EPA Method 8260B.

Prior to use, between boreholes and before being taken off -Site, all downhole equipment will be steam -cleaned or cleaned in a "3-bucket" wash and rinse system with laboratory grade detergent.

The groundwater monitoring wells will be constructed in compliance with state and local well permitting requirements, and in accordance with the DTSC publication Well Design and Construction for Monitoring Groundwater at Contaminated Sites. The wells will be built within the casing as it is removed, using 4-inch diameter Schedule 80 polyvinyl chloride (PVC) blank casing and approximately 10 feet of 4-inch diameter slotted screens.

A minimum of 48-hours following installation, the monitoring wells will be developed using a combination of bailing, surging, and purging until well water is determined to be relatively clear and stable. Groundwater pH, specific conductance, temperature, and turbidity (water quality parameters) as well as clarity and odor, will be monitored. Well development will continue until groundwater quality parameters have stabilized across three sequential measurements as listed in the January 2022 Work Plan.

Upon completion of well installation activities, a California -licensed surveying contractor will measure coordinate (latitude and longitude) location and elevation of each well and survey the top of the monitoring well casing (north face) to a 0.01-foot accuracy.

2.2.4 Vadose Zone Soil Sampling
Shallow vadose zone soil will be sampled using a truck -mounted direct -push drill rig to advance 20 borings to a total depth of 15 feet bgs. Soil samples will be collected from dual -cased sample core barrels in clear acetate liners from 10 and 15-feet bgs from each boring.

J&S Chrome Plating Company and Former Chrome 4 Health and Safety Plan Crankshaft Company
Exhibit 2 736

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
Deep vadose zone soil will be sampled using a truck or track -mounted hollow stem auger (HSA) rig to advance 4 borings to a total depth of 105 feet bgs. Soil samples will be collected from depths of 75, 80, 85, 90, 95, 100, and 105 feet bgs.

Prior to use and following drilling activities, all downhole equipment will be steam -cleaned or cleaned in a "3-bucket" wash and rinse system with laboratory grade detergent. After sample collection, each boring will be backfilled with cement-bentonite grout emplaced using the tremie method to ground surface and repaired to match the existing surface.

All soil samples collected will be analyzed for Title 22 metals by U.S. EPA Method 6010B and Cr (VI) by U.S. EPA method 7199. The recovered soil cores will be screened for organic vapors using a PID. If elevated PID readings (greater than 10 ppm) are observed, the sample will be analyzed for VOCs using U.S. EPA Method 8260B. Samples will be transported to a state ELAP certified laboratory under chain -of -custody protocols.

2.2.5 WasteDisposal
l
Investigation derived waste (IDW) will include purge water and decontamination rinse water, as well as soil cuttings generated during drilling. Soil cuttings generated during drilling will be stored within Department of Transportation (DOT) -approved 55-gallon steel drums or lined roll- off bins.

Liquid IDW will be containerized in (DOT) -approved 55-gallon drums. All IDW will be stored in a secure location pending characterization. Subsequent to characterization, I DW will be transported for disposal at an authorized off -Site facility in accordance with applicable regulations. GSI will assist the client to coordinate disposal of the waste at an appropriate waste facility.

J&S Chrome Plating Company and Former Chrome 5 Health and Safety Plan Crankshaft Company
Exhibit 2 737

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
3„9 III.....! I III.....! III „III.....! II4 C�( Ill llf;;;;! III° II4 III.....! III° III C III.....! I11) III IIf;;;;! Specify emergency reporting contact. Provide Plant Emergency Response Contact with phone number(s) where applicable. Call 911 for emergencies located elsewhere. 3„1 Ilf;;::"uimer ency Contacts
Exhibit 3.1: Emeraencv Contacts
GSI Project Team Leader (PTL)
Samantha Curtis
[mom
GSI Site Manager
Client Project Manager
3„2 Site Sirein or Allarilm Siginalls
No site -specific training is necessary on site. The site does not have any specific alarm signals. 3„3 Ilf;;::"uimer ency sseirnI llly Area(s) and Ilf;;;;lvacuatiii in Route In case of an emergency, assemble along Florence Place to the south of the Site. 3„4, Applicalble Ilf;;::"uimer ency lRespoinse Measures and IFaciiillliiitiiies These measures h7clu e decor7tar if7atior7 ar7d/or~ medical treatment if necessar y, In case of an emergency, call 911.

J&S Chrome Plating Company and Former Chrome 6 Health and Safety Plan Crankshaft Company
Exhibit 2 738

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
Exhibit 3.4: Emeraencv Facilities
1�1
!I! � 111� 11ifil
The nearest urgent care
Emergency
3430 Garfield

1. Head west on Florence Place
facility is the Concentra
(323) 722-
Avenue,
toward Sudan Ave.;
Urgent Care
8481
Commerce CA

2. Turn right onto Garfield Ave.;
approximately 1.9 miles
90040

3. Concentra Urgent Care will be
from the site
on the right.
(approximately 6
Open 24 Hours
minutes' drive time).

Figure 2
The nearest hospital with
(562) 698-
11500 Brookshire

1. Head east on Florence PI toward
an emergency room is
0811
Avenue, Downey,
Scout Ave.;
the PIH Health Hospital
(Emergency)
CA 90241

2. Turn right onto Scout Ave.;
Downey Emergency

3. Turn left onto E Florence Ave.;
Room approximately 3.4
(562) 904-
Open 24 Hours

4. Turn right onto Brookshire Ave.;
miles from the site
5000 (Main)

5. Turn left onto Iowa St
(approximately 11

6. Turn right to emergency room
minutes' drive time).

Figure 3
J&S Chrome Plating Company and Former Chrome 7 Health and Safety Plan Crankshaft Company
Exhibit 2 739

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
4„0 III°1IIR III.....!C"'T III IIIIIIZ "'FIII II4, III°)III.....!III II4II4III.....!IL......� "TIIR IIIIVIIIIII III III.....! UIIIIII III.....!I III.....!IIv Key personnel are listed in Section 3.1, Emergency Contacts. 4„1 Trallining ll equiiireirneints
Check all that apply and list any additional.

X OSHA 40-hr HAZWOPER
Contractor Safety Council (CSC) —Basic +
Site -Specific (CSC or on -site)
Unit -Specific
X OSHA 8-hr Annual Refresher
TWIC Card

4.2 ll equiiireirneints fair Ill esl iiirat it Use
Will respirator use potentially be required? _Yes X No
If yes, GSI Respiratory Protection Plan, found in Section 7.0 of the GSI EHS Program Manual, is applicable. Affected personnel must have physician's written opinion certifying fitness to use respirator based on pulmonary function test and other considerations, be trained in proper respirator use, and have quantitative fit test.
4„3 III°1eirs ininell 111)ocuimeints
List docrrmer7tatlo17 of tr~all7it7g or medical fitt7ess project perr 01717e/ will be required to provide, All field project personnel, including subcontractors, are to maintain training and medical records at their respective offices and provide to GSI, if requested. OSHA 40-hour HAZWOPER training with 8-hour refresher courses is required of all field personnel.

J&S Chrome Plating Company and Former Chrome
Crankshaft Company
Exhibit 2 740
Health and Safety Plan

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
;;; „0 I° "TIlf"IIIII° �° �I"I
The following sections discuss potential hazards at the Site and how to control them. „1 General Site Access Control Measures
Specify site c017trol measures as 17ecessary to prever7t rr17authorize persO17S from er7terir7g Work area (e.g., fefXir7g, barricades, tape, Sigl7s, etc.)
Field activities will be performed between 7:00 AM and 6:00 PM (daylight hours). Access to the Site is controlled by fencing and a locked gate. The general public will not have access to the Site. During off -Site activities, access will be controlled through placement of drilling equipment and traffic control devices in combination with delineators and caution tape, as needed to prevent public access. Equipment may be moved on Site following activities for security purposes. In lieu of moving equipment on Site, the driller may subcontract security services to protect equipment during non -work hours.
„2 Project Personnel Access Control
Specify Sig17 ir7 al7d Sig17 out procedures forproject pers01717e/ al7d mear7S of17otifyir7g Site mar7ager if U17ab/e to be 017 Site.

Personnel must sign in and out every day with the GSI Site Safety Officer. „3 Underground Utiiillliiitiiies Clearance
Specify procedures for obtair7ir79 clearance of locatio17 for drilling, excavatio17, or other subsurface per7etratio17S. If U ir7g a system such as the Texas 811 System or acceSSit7g the Portal at http ://txgc. texas811, orglgeocall/portal/, a 7 hour 170tice prior to start rap is required, specify plate of call, re por7 e al7d case or serial 170. For clearance of site OW17ed utilities, provide contact ar7d re poll e ir7forrrratio17. Include a copy of a17y emails or other 170tificatio17 of clearance at the er7d of this SS HASP,
Utility clearance will include at least a 48-hour notification to Underground Service Alert (USA) of California, the state underground utility notification authority.

Below are the color designations typically used by the underground utilities' surveyors in Texas and California (note other states may differ):
txniDit 5.s: utinty coior uesianations
— PROPOSED EXCAVATION
— TEMPORARY SURVEY MARKINGS
E — ELECTRIC POWER LINES, CABLES, CONDUIT AND LIGHTING CABLES — GAS, OIL, STEAM, PETROLEUM OR GASEOUS MATERIALS
ORANGE — COMMUNICATION, ALARM OR SIGNAL LINES, CABLES OR CONDUIT BLUE — POTABLE WATER
PURPLE — RECLAIMED WATER, IRRIGATION AND SLURRY LINES
GREEN — SEWERS AND DRAIN LINES
J&S Chrome Plating Company and Former Chrome 9 Health and Safety Plan Crankshaft Company
Exhibit 2 741

GSI Job No.: 5550
Issued: September 14, 2022
„, General Work III lazards and Avoidaince
General work hazards include slip, trip, and fall hazards, head or foot injuries from falling or dropped objects, strains from over -exertion or incorrect lifting, electrical shocks, etc. These hazards can be controlled by good housekeeping measures and safe work practices, as outlined below. See also GSI EHS Program Manual.
.4.1 Housekeeping Measures
• Excess brush or high vegetation should be cleared from the work area to the extent practical prior to start of the job.
• The job site must be kept clean and free of trash and debris. Trash will be placed in bags or other suitable containers when generated. Disposable PPE must be disposed in designated containers upon removal.
• Materials such as lumber, well screen and riser pipe, filter pack sand, cement, etc. will be neatly stored in a designated area.
• Tools and equipment must be returned to the tool box or designated area when no longer in use.

5.4.2 General Safe Work Practices
• Use buddy system.
• Stay alert at all times to activities in your surroundings. Watch for on -coming vehicles, other workers, and overhead hazards.
• Work at a deliberate pace; do not rush a job.
• Avoid heavy lifting and lift with knees bent.
• Use tools only for their intended use, and make sure tools are in good condition. Inspect power tool and extension cords prior to use.
• Maintain safe distance (at least 10 feet and an additional 4 inches for every 10 kilovolts (kV) over 50 kV) between drill rig mast or other overhead equipment and overhead lines. • Avoid unauthorized entry to restricted areas including confined space areas. • Do not operate plant process equipment; do not open or close valves • Proper PPE (specified below) must be worn at all times. PPE must be inspected regularly and properly maintained.
• Remove gloves and wash hands before handling food or tobacco products.

5.4.3 Fire and ' losion Hazard Mitigation
All drilling or excavation locations must be properly cleared for the presence of underground utilities prior to drilling or digging. (Utility clearance procedures are specified above).

Gasoline and other fuels must be stored in steel safety cans with mesh flame arresters and spring -mounted relief vent mechanisms. Flammable and combustible materials including paints and solvents must be properly stored away from sources of ignition.

Fire extinguishers must be present on all vehicles and drilling and excavation equipment, and in all areas where spark producing equipment is in use. .4.4 Other Measures (check ads a lioa le)
X Smoking not permitted on -site, or
Smoking permitted only in designated areas
Matches and lighters not permitted on -site
J&S Chrome Plating Company and Former Chrome 10 Health and Safety Plan Crankshaft Company
Exhibit 2 742

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
Hot -work permits must be obtained for spark -producing equipment in designated areas
Other

5.4.5 Heat -Related to isorers,
The major~ varieties of heat related disorders, their~ related symptoms al7d appropriate treatment are listed below ir7 order of h7crrea if7g severity,
Exhibit 5.4.5a: Heat Related Disorders
Cram in
Ma be resent
Ma be resent
Absent
Mental State
Faint, dizzy, fatigue
May be disoriented
Stupor or coma
Skin & Complexion
Cool, moist, flush;
Cool, pale, moist
Red, hot, dry
rash may be present.

Temperature
Normal
Normal to low
Very high >105° F
Pulse
Rapid >110 beat /min
Rapid, weak
Rapid, bounding
Blood Pressure
May be low
May be low
May be high in early stages
Treatment
Give water &
Give water &
Provide rapid cooling by
electrolytes, loosen or
electrolytes, loosen or
immersion; cover in wet
remove clothing, move
remove clothing,
cloth and transport to
to shade
move to shade
emergency room
Prevention Measures: All heat disorders are caused by loss of fluids and the body's inability to cool itself. Heat stress can be prevented by the following measures:
• Pre -hydrate before going into the field: water or water -electrolyte drinks are preferable to caffeinated beverages or soft drinks. Refrain from alcohol the night before field work. • In the field drink frequently. Numerous small drinks at a tepid temperature are better than rapid, large volume intakes of iced drinks.
• Rest at least a few minutes every hour or two.
• Observe co-workers for signs of heat stress.

OSHA identifies the following Risk Levels for given values of the heat index and recommends increasing Protective Measures to be implemented at each level.

Exhibit 5.4.5b: Heat Risk Levels

5.4.6 HeaEquipment Operations tions
Drilling and other equipment must be in good condition. Particular attention should be paid to the condition of cables and hoisting equipment. The equipment must be equipped with a back-up beeper. Barricades or caution tape should be used as needed to exclude unauthorized personnel from the work area.

All heavy equipment must employ the warning methods while the vehicle is backing up, as described in 8 CCR 1592, including:

J&S Chrome Plating Company and Former Chrome 11 Health and Safety Plan Crankshaft Company
Exhibit 2 743

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
• Automatic back-up alarm;
• Automatic braking device;
• A spotter directing the vehicle;
• Inspection of the entire perimeter of the vehicle prior to backing up; and/or • Prohibiting foot traffic in the work area.

During drilling, the drill rig should be positioned to allow for adequate work room and the area kept free of trip and slip hazards. Care must be taken to avoid the catching of loose clothing in moving parts, and to keep hands free of pinch points. Proper PPE including hard hat, safety glasses, gloves, hearing protection, and safety shoes must be worn.

All vehicles or mechanical equipment that may have all or parts of its structure near energized overhead lines should maintain an operating distance of at least 10 feet of clearance with distance increased by 4 inches for every 10 kV over 50kV.
.4. ' Confined Space and xc va do Safety
All personnel must obey all posted restrictions on entry to confined spaces. Excavations deeper than 4 ft should not be entered for any purpose unless 1) the excavation walls are properly shored or are sloped at a 1:1 slope, or less steep, and there is no danger of collapse or engulfment; 2) a suitable means of egress such as ramp, stairs or ladder is located so as to require no more than 25 ft of lateral travel to reach it; and 3) testing demonstrates a hazardous atmosphere is not present.
.4.8 CAI -19
Due to the outbreak of the novel Coronavirus Disease 2019 (COVID-19), GSI's Pandemic Disease Plan (Addendum) will be implemented for GSI employees and subcontractors, which reflect the latest Centers for Disease Control (CDC) recommendations as well as requirements under California Code of Regulations (CCR) Title 8 Rule 3205. Below is a list of hazard mitigation measures that may be implemented:

GSI employees and subcontractors shall monitor their health and remain home if feeling unwell (sick).

Face masks are no longer a requirement, but the Los Angeles County Public Health Agency recommends the use of face masks to be worn in indoor settings when social distancing (separation of 6 feet or more) is not attainable. Therefore, GSI staff and subcontractors may wear face coverings when they see fit.

GSI staff and subcontractors shall wash hands with soap and water, or use hand sanitizer, prior to consuming food, after sneezing, etc.

J&S Chrome Plating Company and Former Chrome 12 Health and Safety Plan Crankshaft Company
Exhibit 2 744

GSI Job No.: 5550
Issued: September 14, 2022

5.4.9 Potential Chemical Exposure Hazards
Summarize primary constituents of concern, relevant exposure levels, and the maximum expected concentrations in soil and/or groundwater, to the extent known. Provide Safety Data Sheets (SDSs) in Attachment A.

Exhibit 5.4.8: Chemical Exoosure Hazard Levels
Chemical

PEL/TLV
STEL
IDLH2
(eV)
Soil
Water
Ca = Carcinogen
Name/
(ppm)
(ppm)
(ppm)
(mg/kg)
(mg/L)
Abs = Skin
CAS No.

Absorption
Con = Skin or Eye
Contact
Inh = Inhalation
Ing = Ingestion
PCE [127-18-4]
25 100
150

9.32 0.00073

0.013
Ca, Inh, Abs, Ing,
Con
TCE [79-01-6]
10 25
1,000

9.45 0.00074

0.023
Ca, Inh, Abs, Ing,
Con
1,1-
5 NPV
NPV

10.00 UNK

0.0037
Ca, Inh, Abs, Ing, Con
dichloroethene
75-35-4
Chloroform
10 NPV
500

11.42 UNK

0.0016
Ca, Inh, Abs, Ing, Con
67-66-3
Chromium

0.5 NPV
250
NA
850
12 Inh, Ing, Con
[744047-3]
m /m3
mg/m3
Selenium

0.2 NPV
1 NA
UNK

0.232
Inh, Ing, Con
[778249-2]
m /m3
mg/m3
Barium

0.5 NPV
NPV
NA
160

0.120
Inh, Ing, Con
[7440-39-3]
m /m3
Chromium (VI)

0.0002

0.0005
15 mg/m3
NA
330
12 Ca, Inh, Ing, Con
[18540-29-9]
m /m3
m /m3
Lead [7439-92-1]

0.05 mg/m3
NPV
100
NA
83 0.011
Inh, Ing, Con
3 m /m
Unless otherwise noted, Permissible Exposure Limits (PEL) and Threshold Limit Values (TLVs) are permissible time -weighted average exposure limits (ppm in air), which must not be exceeded for an 8-hour work-day/40-hour work week. Short -Term Exposure Limits (STELs) must not be exceeded over a 15-minute period.

IDLH = Immediately Dangerous to Life or Health; must not be exceeded at any time.

I.P. = Ionization Potential. A photoionization detector specified in Section 6.0 should have a lamp with an IP (i.e.

10.6 eV or 11.7 eV) that is greater than the largest IP of COCs from this table that may reasonably be expected to occur as volatiles.

NPV = No published value; ND = Not determined.

Exposure limits, ionization potentials, and associated health hazards can be found in the NIOSH Pocket Guide to Chemical Hazards and the ACGIH Guide to TLVs and BEls and Cal -OSHA 8 CCR 5155 Table AC-1 .

To minimize potential chemical exposure, the following measures will be taken:
• SDS must be provided for any chemical brought on -site for project use. • Workers should remain upwind of contaminated materials to the extent practical. • PPE specified below will be worn prevent skin or eye contact with chemical constituents. • Air quality monitoring will be conducted and respiratory protective equipment used as needed, as described below.

J&S Chrome Plating Company and Former Chrome 13 Health and Safety Plan Crankshaft Company
Exhibit 2 745

GSI Job No.: 5550
Issued: September 14, 2022
Eating, drinking, smoking, gum chewing and oral tobacco use are not permitted in areas where chemical exposure could occur.

Workers must remove gloves in the work area and drink from a water source outside the immediate work zone.
• PPE must be removed and hands thoroughly washed prior to breaking for meals .4.10 Other Po ten tta t Hazards,
List other~ poter7tial hazards associated with the site andlor~ specific tasks and describe hazard miticgatio17 methods,
Exercise extreme caution when working near or around the drill rig and other heavy machinery.

Make sure the equipment operator can see where you are, especially when the equipment is being moved from one location to the next.

Vehicle Hazards:

During off -Site activities adjacent to streets, access will be controlled through placement of drilling equipment and traffic control services in combination with delineators and caution tape, as needed to prevent public access.

Noise Hazards:

If necessary, noise monitoring will occur using a personal sound and noise level meter (such as the Casella CEL-490) to determine the 8-hour time weighted average (TWA) of noise hazards and if further monitoring is necessary. Based on the field activities described above, it is not likely that the 8-hour TWA will exceed 85 dBA, and that routine monitoring will be necessary. lonizina Radiation Hazards:

No ionizing radiation or radiological hazards are anticipated at the Site. No background information is available to suggest radiological materials were used or disposed of at the Site.

Heat -Related Illness:

To prevent heat -related illness, take frequent breaks and drink plenty of fluids throughout the day, and apply sunscreen.

J&S Chrome Plating Company and Former Chrome 14 Health and Safety Plan Crankshaft Company
Exhibit 2 746

GSI Job No.: 5550
Issued: September 14, 2022
6„0 A1111IR QUAII,,,,,III°TY M01141°TOIRING
A PID will be used to monitor worker's breathing zone during drilling and sampling procedures. In the event that sustained levels (1 minute) of 5 ppm is measured in the breathing zone (above background levels), stop work, move off Site and notify the PTUPIC. Adjustments to the field practice such as ventilation and engineering controls will be implemented as needed prior to returning to the field activities. If respirators are worn, workers must adhere to the Respiratory Protection Plan included in the EHS Program Manual and 8 CCR 5144.

Changeout of respirator filtration cartridges shall be conducted per the manufacturer recommended service life schedule. Should respirators be required, a changeout schedule will be determined based upon COC concentrations observed as well as the work rate, ambient temperature, atmospheric pressure, and relative humidity. At a minimum cartridge changeouts shall be conducted once per day.

Air quality monitoring will be performed by the SSO to 1) screen recovered soil and 2) monitoring air quality in work areas.
iiiir Monitoring Instrument
X Photoionization Detector (PID) MiniRAE 3000 or equivalent (lamp - 10.6 eV) Drager Tube (specify compound & use)
Personal Badges (specify compound & use)
Lower Explosive Level (LEL) Meter
„2 MonitoringFrequency and I1,,,,,catiiin
. .1 SCAQMD Rule 1166
SCAQMD Rule 1166 is not applicable to this scope of work.

6.2.2 SCAQMD Rule 1466
SCAQMD Rule 1466 is not applicable to this scope of work.

J&S Chrome Plating Company and Former Chrome 15 Health and Safety Plan Crankshaft Company
Exhibit 2 747

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 EN IlRONIMENTAL.
" „ III°1 III.....! 111 11 11,,,,,, III°' IIR "'TIIf;;;;! C "'T111 IIf;;;;! III.....! III III°1 I III.....! 114 "' (III° III° III.....! Only Level D PPE will be required for this project.
��'bl■I II�II�II�II�II
A minimum of Level D PPE is required for all site personnel at all times, upgraded as necessary depending on task and conditions.

Basic Level D PPE shall include the following elements:
1) Hard Hat (w/ mono goggles)
2) Safety Glasses (w/side shields)
3) Safety Shoes (w/steel toes)
4) Body Covering (long pants, shirt w/ sleeves, collar) Basic Level D equipment will be supplemented as described in the following section. 7 2 Suppleirnein'tal I1,,,,,e eIII IIf) III° III° IIf;;;;1 ��11 I Ill, "FI,, ill,, Irli 11 "Will
Flame Retardant Clothing (FRC)
X Hearing Protection When using heavy equipment or if standing in the vicinity of heavy equipment
X Work gloves While handling equipment (e.g. cut resistant) Latex or vinyl surgical gloves
X Neoprene or Nitrile gloves While handling samples or sampling equipment
Tyvek Coveralls
Polycoat Tyvek Coveralls
Chemical -resistant boots
Face Shield
X Reflective High Visibility Vest While on Site
7 3 I1,,,,,e ell C
No Level C work is expected to be performed on this project. 7 4. I1,,,,, e e 111 1113 111° il:3111: ;!
No Level B work is expected to be performed on this project.

J&S Chrome Plating Company and Former Chrome 16 Health and Safety Plan Crankshaft Company
Exhibit 2 748

GSI Job No.: 5550
Issued: September 14, 2022
111) III.....! O 0 114 "'TAIM111MA"'UIII II4 III°' IIR "'TOCOI1,,,,, Specify procedures for perr 01717el decontarr if7atlor7 al7d rr af7agemer7t of disposable PPS.

Procedures for personnel decontamination include washing hands thoroughly before leaving the Site or eating.

Reusable downhole sampling equipment will be decontaminated using steam cleaner or a solution of laboratory -grade detergent (such as Alconox) and potable water and rinsed with potable water. Investigation -derived waste (IDW), such as soil cuttings, decontamination water, and purge water will be containerized, stored in a secure area pending waste characterization and disposed of at approved off -Site disposal facilities. Other waste streams generated on Site (i.e., nitrile gloves, paper towels, etc.) will be placed in trash bags, and disposed according to state and local regulations.

Specify procedures for rre poll e to 17017 emerger7cy chemical release.

No chemicals will be used during this project. However, in the event of a release of chemicals, a sorbent material, such as bentonite, will be applied to contain the spill. The GSI project manager, client project manager, and a facility representative will be immediately notified.

J&S Chrome Plating Company and Former Chrome 17 Health and Safety Plan Crankshaft Company
Exhibit 2 749

GSI Job No.: 5550 140 GS1
Issued: September 14, 2022 ENVIRONMENTAL
Provide a17y additiol7al it7formatio17, procedures, or h7structiof7s as 17ee e .

GSI will conduct a review of the site -specific Health and Safety Plan with subcontractors and other personnel on -site before the project is started. The SSO will record items discussed on the Daily Site Safety Record (Attachment 1). As a means of tracking attendance, all site personnel are expected to review and sign the HASP. The SSO will track onsite / offsite times on the Daily Site Safety Record. After lunch each day, GSI will hold a brief meeting to discuss any safety issues encountered during the morning hours that needs to be addressed in the afternoon, and to refresh all field personnel on the safety issues associated with the project tasks.

A public restroom with a handwashing station (soap and potable water) that is regularly cleaned is available at 6662 Loveland St, Bell Gardens, CA to the west of the Site. If a hand washing station is not available on the field truck, GSI personnel and subcontractors may use this sanitation facility during work at the Site. Additionally, during drilling activities portable restrooms and washing stations will be available for use on Site. Bottled drinking water will be brought on Site by field personnel and stored in the field truck.

At the conclusion of each workday, the SSO will complete the Daily Site Safety Record form.

J&S Chrome Plating Company and Former Chrome 18 Health and Safety Plan Crankshaft Company
Exhibit 2 750

GSI Job No.: 5550
Exhibit 2 751

v v
o
N
Cn
>
Q
U
(n
Q
S
o`
�o v
oa
�v
vZ�"
�c
a
m
Z r
o rn �
W
7 W
J
in
m
0 0
0 0
�
`o
m
a
m
�
N
w
ILbY
�
m LL
N
d
Sc 2
o ,. / ,..,. r „� :..,, . aa. v a / ,..l ...rrr „ rlr,/,�!o/ J /I s / , / •,(�' / m(Jl � r � �/"Slri 1/ ,.. ,, ..Ir c., Hui./., ,„., r..,., ✓./, o „�... ,//./,,. r, ,, ,,„ a 1 nr ,,,. / fi., -,,, o�„ , „✓a , , /�.. 1 e � .. i. k S1� ., �, 1 n. / , ,; n a, m // // ,, � � / I r,,, ,,., ,.. r.
¢
,�(n,GU 'k" r/ y ,ri% r /��//l,//knx/ eJr /✓u �� X'�%� % rn "!%/�""r f r�4r)fi>, d „ Dn
/
/i —
�
I'u "�/j� j/f i '✓' �r l'/ // (lo�/�'�GCr , �J l��''" T, ,:�/r m/ ww j DIY,i /116 /y moo^ /i �i� r✓//ir r I i, �'
mo
�
N„m u, /J�lG1 hp
�"�Jr>jk '�� lIj f 4;��/�l h r,,,'', ,, fr �ri1!!ri ��{ X `MNG,�' � �g�w � w✓, �aJ�C'� ,,,,r /lf (rw �NUmN � r%� //'z _ r lr � r I �/,m ✓ I, o / ��/ ir;% r;-i•— ri,
1%/„. „.. ,,�/r �,,, o,.rlft ,�„ rY1r// sr w/ i°:.`�/l/%/r�� „%/,,, �nIG"✓/i r�:�lfoarrvirr _}��/i %ii �;," 'w' u ��////��ll� , , , �. r l / ', ,; , � ; , -i � nr,,%, , ,n�„ , � >; ,,, , � o u ,.. %/ � :P, a I I�Ujr:,�lr / �� /%//r �;.. ✓,� � /�/ ",/ � �J�J�) rn' // fry/ � / / , ,, - /rtr,^d� 19�1r/ m,.al,, �, V � �,�� r , 4 Mare, o ,/�„✓. �� "m ,,., r / �,,,. / �/�,//; r/, , 11 , ,i� �./a /, ,or �„J/ // : i/%�� 6'r ,,,,;.� ;,,, ,r/ � p ,/aYaw!4;+1G l w��no 1 �' N, n-,m�ls,�r �..,,.,, ,,n ° I/„ �.%>re� a r "�:, /� �/r�.. ✓J I rf/"�,: �� /rl:. lY /i,'� '� � � � j, r :,,, ,, ,, ,,,M,or ry /l/i `rr�/.= /�%/�W@ll larcu� ,O�a/.r ,r//,,,;. ,,/, �/ r�/ l•ar„e � is r �� 'p o �, „� ,, / f kv, , �//, % � ,//i ///i,;✓llof // „ ///v .../,,,,, /r, ,,, ' , V 2/ ��/, fr .;ro l /k?� �: `sw. ,�� :Mr ✓ „. T 4 rlrrr ,� „r r,. %�% �,,, �/'�4 / l�yi �,.. 1 ��,:,,r/ / � ,„..,1� o, visrh`i```•'%,. rN1��l, 1�� w ,.. �/�, (fr ,,,,,,,,,. r /�i ..>, % ,o��/�, r,,./. , 1 ;/ , %� ,; ,,,. , „, i/1 ;:r ✓ , r. � 7r r,� � r/o r 4J 4 M� //� ��w r p /, lr�rrt/'rX /- ,u4r.oq �i/� ,,f ,/ +6ir ,r /%�„ „ /ur : �� ,�� lr ,,,. ,.,,/ 1 r„ �/,,,,, °f5 ; � > :,,,.,. v, / ,: W r �; w ;,, � ", „ , ; ��D/%// �s,, in i =,;i31 ,,, �� p�'/�i; /��P' ,�/°✓ % %% b//�.. ¢� ,11%� ;;-,./ ,.✓„. /,,{��11�//�,,,�/ /f k411/N,a,��.„ ri /, l( 1 1 ,,,,� /�..„ro "� ,-�,,,;. ,''�f/f ,0�,11 � �.A�,,, i'��r,,.�� ; �: ��% �ti✓ � r � !" r/ fr ,,,f / Sri w lw o ,�,r /r �4w
1 �'�`
pv., .r �/ �o�%r� ,!'"Ir �' IYH„: ,/ v�11%r�l �I 1l�ll//,,v Y d - �alfJ,,,fI>� m r,; W� >t ��, G ��wm�Nl � � � " 'r�� I �� /f �6 .• f �� /irk "'�( 9 ° ;� �j� / !� � w (�'7/ f ,p, � � ;: � , i `.. >,,,,,, Ir l a „ 1f,♦/, r r 1 NX% % r, ✓ 7� yllr /� f ,,, �l �'s�:: ' ( ��j'(�(+�'�( �� /.r%il or ��r�� Ij ;m,,, r, / II4, �.: a /•oX, Z�V!w ,//o, %, r/,'o ,/i H��,%l�,X" ,o �r�r (,.mp✓,. /Ors// �(6Iu3.., �j >„rIIYI ♦j�f„r ,,:, %:f�l � ;. w � � d ,.w, �/, ;- /,,, ,n,.W' r r`/ ' o,: %6'f Y/i �, ��,. 1, N�tf a ,re/ ,r/ ,,.,,.,"^, r �Ly. a�lll�)�%�../r ,,, � ,,, ,-,,,, -`w, ,n �„;• w�l, Li, ; f�,. �.I"kG a, �l r � �r X �� rl/fro�ml- ^:3�N)�� %,: /, ;,. �'/ � "%r,-,,7 - „'k�:1 r>t +r /1/ i�rdr t r / ( � ✓ /�i % . rm
40, C fo4N
/�
�r ,(, /i i s GflF, 1 /Doll r ti ff a X /il it h i f
';,
i
/ r
�!j;;,, ylr�//;rf, �' ✓lII>' /�!' ,�� ' � r ! �/ 1; ,/r v.�s ��/y �,, r m �j a � o, �":'��I. IJ� r 10 „cans aH1J / r„ l 9,'sT,, / r ,rr '1iil.� ' e, a r�III r / ,u,rl/,/' /� ,/',, �4 ,.,,,//i/ ,D l ' uao/r i> I „• ll;`',Jl' i' "f �1' ;Rw // �iq,sg„ X///, ✓ r� :� / % 11R1' h'Is.,:.il rJi ,,, ;i...er"', G ; ;'�'.r / !. %%�Vyi,.�r/, �/ r-j k4„ 6i/ �/ rui /� l , l r , ,.. r„ .'' , 11 ,�
lr ,,..
y-.. � /
a�".. �t Jrf , / r, /0 , r, i �,,(�li�i 111 , �� i1 / �/� , „ � ,, or ' �gw9T„/�( ais ,o: _, /�1)•P� u,,, / � , : I ! I � � ��m,✓�� rr✓ f r a, � "ro,i r 4ij" ,ru rU�AhPoi a/10 ��,,,� /ll; `�,✓'I��., s/i �a//r !%irk r, �.,,' r f%; P,v J»7 ru�?f `;/"r �. %//y/l��/ n/�, N/ I l� r t�l /rx!�� y ; /i/ _. �Yo ✓r ry/r// I If r ,% „� 6 , ;Y�l'' ,. / ;,;, rd' - ,n , / ��ilr "Hvi r rra /j ; frgo
nliY�rr�
,�„/�+�, f ,./ ,r %% ��O lm .; �i,r "..;� O ,, /, /, /r '' r �j„r Xi21 �; i / I� ✓,,,i %/� r,' r,;,,, ,; ,� 2�
�� /� � u r »/� N ;, , 4!4�.��,..:� ��, j .
„ rr�l , %; I /,y ,!/ iVj l ' / ,nJ/'''%J, ;: lrr f)l � rtll/�///� I��/� :. ,�ll a rl,�� flf �/� � ✓%%� »��' r �: �✓,.,arj� rrr��i r r II('� ,fla,..ris' �2�i :, ✓ ,.t //�� ,wf'"rr„ � / ,r„I r... v%///,�//'oi/i:n l :� l .'�1i',. ,ra ?Nlrf(� rI ,,.. -rit`� fj, �,I Irr�;„ r,k�r✓,�;,, °tw'.,,°�r �„ �� /;r �/ � Iris,, // ,r- �; , 'oj �. ! ,,' `�G��if(f „�� i y�, � I
Dl l!l11 ../�� „C V.Ir�,P a,9Y ,;% o"'i/i f�ti; "9 ,er I% / rii ,�' FIf% ��%, e 4:. r�(�,, ,,u,,/>i �r,%fJf)��, ��• (P i yil ,:; �.., ';�? a ,., ., ;,,,f
^ I:""(!/� /%i,1I .i, t `UREl i rG
/ a, / ;fill"; 1, ?/i, s� 1 rs, //.. w X sr, e,f�� /,�i' r� �l JIIIN¢4gyr'� , / 11'' 1�/ll' i ill �,s ro , �,- " rhUi11,NY N fl IlllJlJllll/ Ir ri n "a/� ii— ' j/,
/ yrn/1L4'r l e ',x
Lo
o
L

>
a
cu
70 Z)
72 c>
O
U
(B
d
U
a�
O
LL
c
O
U)
N
70 (B
2 �L
O
cu
U
N
O1
D
cu
N
U
c
O
Z
O ai
UCN i
C
w U U
�0 o
W
U
IL Q U
U c
a> >
Z 2)Q
0 Q
m
E
E
0 U
N
O
O
O
CD
O
m
m
w
r
m
C7

t
\
3 e
\' \
§ �
zI\
O=&
CO a)
ƒ/ƒR
_j
�/\.\
pE�
0 0
It=
Ln k
2e
o e
E
L
/
y
q
�
/
/
�
0 /
2 E
0 m
»
§
0 m
0 /
»
2 »
�
. /
< §@_
� 2 �
m
E
@ o U »
o 0 E 0)
± / E
o f o a)
t o c 3

E E E E
■
w & a » a 6
_
\
L

GSI Job No.: 5550
Exhibit 2 755

GSI Job No.: 5550
Exhibit 2 756

GSI ENVIRONMENTAL INC.

DAILY TAILGATE SAFETY MEETING
Project/Location:

Site Safety Officer:

Meeting Conducted By:

GSI Job No.

Page 1 of 1 ends

Date:

Meeting Attended By:

NAME COMPANY SIGNATURE
Additional Personnel (See Next Page)
Tasks to be Performed:

Potential Hazards and Hazard Avoidance Measures:

Mechanical Hazards:

Heat Stress:

Chemical Exposure:

Biological Hazards:

Other:

Exhibit 2 757

GSI ENVIRONMENTAL INC.

DAILY SITE SAFETY RECORD
Project: _
Location:

Field Personnel:

GSI Job No.:

Date:

Page 1 ends

Time Time
Name Company Onsite-Offsite Onsite-Offsite
1)
2)
3)
4)
Additional Personnel (Attach additional sheets as needed.) Work Item/Personal Protective Equipment Level:

Task: PPE:

Air Quality Monitoring: Required (See record on next page.) Not Required Safety Awareness Issues Discussed:

Site Safety Officer: Confirmation: `9 have visually inspected the site for proper housekeeping, absence of slip or trip hazards, etc." Signature: Date:

HEAVY EQUIPMENT USE (IF APPLICABLE)
Type of Equipment & Model: Owned: Rented:

Certification: `9 have been properly trained on the use of this equipment. 1 have inspected this equipment and confirmed it to be in good working condition."
Signature: Date:

ACCIDENTS/INJURIES/INCIDENTS
(Description of incident and actions taken. Attach additional sheets as needed.) Exhibit 2 758

GSI ENVIRONMENTAL INC.

DAILY SITE SAFETY RECORD
Air Quality Monitoring:

Photo Ionizing Detector (PID)
Calibration Check:
(95 ppm Methane Gas)
GSI Job No.

Page 2 ends

Date
Other (Specify)
10 X Scale Reading (ppm)
100 X Scale Reading (ppm)
Reading*
Time Activity Sample Point (ppm)
* Reading above background, sustained for 1 minute period.

Action Level ppm Action Level Exceeded?
Action Taken
Remarks
Exhibit 2 759

GSI Job No.: 5550
Exhibit 2 760

8/7/2020 CDC - NIOSH Pocket Guide to Chemical Hazards - Barium chloride (as Be) Z0Centers for Disease
1 Control and Prevention
The National Institute for Occupational Safety and Health (NIOSH)
CAS No.
10361-37-2
Exposure Limits
RTECS No.

CCii�I11111

NIOSH REL
TWA 0.5 mg/m3 [*Note: The REL also applies to other
soluble barium compounds (as Ba) except Barium
sulfate.]

OSHA PEL
TWA 0.5 mg/m3 [*Note: The PEL also applies to other
soluble barium compounds (as Ba) except Barium
sulfate.]
r�m�11r�d� N4�fwl�:�rvre"+rk;�dr�Slq�1f Mrrsx#ditsofel and MOM raurrarriro o �� DOT ID & Guide
1564 154(barium compound,
n.o.s.)
Measurement Methods
NIOSH 7056, 7303;
OSHA ID121
See: NMAM or OSHA Methods
Molecular Boiling Point Melting Point Solubility Vapor Ionization Weight Pressure Potential
2840°F 1765°F 38%
208.2 Low ?
Noncombustible Solid
Exhibit 2 761
https://www.cdc.gov/niosh/npg/npgd0045.html 1 /3

8/7/2020
CDC - NIOSH Pocket Guide to Chemical Hazards - Barium chloride (as Be) Exposure Routes
inhalation, ingestion, skin and/or eye contact
Target Organs
Eyes, skin, respiratory system, heart, central nervous system Personal Protection/Sanitation First Aid
(See protection codes)
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet or contaminated
Change:Daily
(See procedures)
Eye:lrrigate immediately
Skin:Water flush immediately
Breathing:Respiratory support
Swallow:Medical attention immediately
Exhibit 2 762
https://www.cdc.gov/niosh/npg/npgd0045.html 2/3

8/7/2020
CDC - NIOSH Pocket Guide to Chemical Hazards - Barium chloride (as Be) See also
INTRODUCTION ICSC CARD: 0614
Page last reviewed: October 30, 2019
Exhibit 2 763
https://www.cdc.gov/niosh/npg/npgd0045.html 3/3

Centers for Disease
Control and Prevention
CDC 24/7, Saving Lives, Protecting Peoplerm
Promoting productive workplaces 12710qskf® through safety and health research (/niosh/index.htm)
..............................................................................................................................................................................................................................................................................................................................................................................................................

Vinylidene chloride
Synonyms & Trade Names
1,1-DCE, 1,1-Dichloroethene, 1,1-Dichloroethylene, VDC, Vinylidene chloride monomer, Vinylidene dichloride
CAS No.
75-35-4
RTECS No.

KV9275000
DOT ID &Guide
1303130P(inhibited)
Formula
CH2=CC12
Conversion
IDLH
Ca [N.D.]
SA'AtIULH INDEX
764

Exposure Limits

NIOSH REL
Ca See Appendix A (nengapdxa.html)

OSHA PEL
none See Appendix G (nengapdxg.html)
Measurement Methods
NIOSH 1015 ;
OSHA 19
See: NMAM or OSHA Methods
Physical Description
Colorless liquid or gas (above 89°F) with a mild, sweet, chloroform -like odor.

Molecular Weight

96.9 Boiling Point
890F
Freezing Point
-1890F
Solubility

0.04 Exhibit 2
765

Vapor Pressure
500 mmHg
Ionization Potential
lo.00 eV
Specific Gravity

1.21 Flash Point
-20F
Upper Exposive Limit

15.5 Lower Explosive Limit

6.5 Exhibit 2 766

Class IA Flammable Liquid: F1.P. below 73°F and BP below ioo°F.

Incompatibilities & Reactivities
Aluminum, sunlight, air, copper, heat [Note: Polymerization may occur if exposed to oxidizers, chlorosulfonic acid, nitric acid, or oleum. Inhibitors such as the monomethyl ether of hydroquinone are added to prevent polymerization.]
Exposure Routes
inhalation, skin absorption, ingestion, skin and/or eye contact Symptoms
irritation eyes, skin, throat; dizziness, headache, nausea, dyspnea (breathing difficulty); liver, kidney disturbance; pneumonitis; [potential occupational carcinogen] Target Organs
Eyes, skin, respiratory system, central nervous system, liver, kidneys Cancer Site
[in animals: liver & kidney tumors]
Personal Protection/Sanitation
(See protection codes (protect.html))
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet (flammable)
Change:No recommendation
P rovid e: Eyewash, Quick drench
First Aid
(See procedures (firstaid.html))
Eye:Irrigate immediately
Skin:Soap flush immediately
Breathing:Respiratory support
Swallow:Medical attention immediately
Respirator Recommendations
NIOSH
Exhibit 2 767

At concentrations above the NIOSH REL, or where there is no REL, at any detectable concentration:
(APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure - demand or other positive -pressure mode
(APF = 10,000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode in combination with an auxiliary self-contained positive -pressure breathing apparatus
Escape:
(APF = 50) Any air -purifying, full-facepiece respirator (gas mask) with a chin -style, front- or back -mounted organic vapor canister
Any appropriate escape -type, self-contained breathing apparatus Important additional information about respirator selection (pgintrod.html#mustread).

See also
INTRODUCTION ICSC CARD: oo83
Follow N IOSH
Facebook ( http://www.facebook.com/NIOSH)
Flickr ( http://www.flickr.com/photos/NIOSH)
Pinterest ( http://www.pinterest.com/Cdcgov/workplace-safety-and-health/) Twitter ( http://twitter.com/NIOSH)
YouTube ( http://www.youtube.com/user/NIOSHSafetyVideos) NIOSH Homepage

NIOSH A-Z
Workplace Safety & Health Topics
Publications and Products
Programs
Contact NIOSH
File Formats Help:

Exhibit 2 768

How do I view different file formats (PDF, DOC, PPT, MPEG) on this site? ( https://www.cdc.gov/Other/plugins/)
( https://www.cdc.gov/Other/plugins/#pdf)
Page last reviewed: April 11, 2016
Page last updated: April 11, 2016
Content source: National Institute for Occupational Safety and Health (NIOSH) (/niosh/) Education and Information Division Exhibit 2 769
https://www.cdc.gov/niosh/npg/npgd0661.htm1 6/6

Synonyms & Trade Names
Methane trichloride, Trichloro methane
CAS No.
67-66-3
RTECS No.

FS9100000
DOT ID &Guide
1888151
Formula
CHC13
Conversion
1 ppm = 4.88 mg/m3
IDLH
Ca 1500 ppm]
See: 67663
Exhibit 2
Chloroform
770

Exposure Limits

NIOSH REL
Ca ST 2 ppm (9.78 mg/m3) [6o-minute] See Appendix A (nengapdxa.html)

OSHA PEL
C 50 ppm (240 mg/m3) See Appendix G (nengapdxg.html)
Measurement Methods
NIOSH 1003
See: NMAM or OSHA Methods
Physical Description
Colorless liquid with a pleasant odor.

Molecular Weight
119.4
Boiling Point
1430F
Freezing Point
-820F
Solubility
(770F): 0.5%
Exhibit 2 771

Vapor Pressure
16o mmHg
Ionization Potential

11.42 eV
Specific Gravity

1.48 Flash Point
NA
Upper Exposive Limit
NA
Lower Explosive Limit
NA
Exhibit 2 772

Noncombustible Liquid
Incompatibilities & Reactivities
Strong caustics; chemically -active metals such as aluminum or magnesium powder, sodium & potassium; strong oxidizers [Note: When heated to decomposition, forms phosgene gas.] Exposure Routes
inhalation, skin absorption, ingestion, skin and/or eye contact Symptoms
irritation eyes, skin; dizziness, mental dullness, nausea, confusion; headache, lassitude (weakness, exhaustion); anesthesia; enlarged liver; [potential occupational carcinogen] Target Organs
Liver, kidneys, heart, eyes, skin, central nervous system Cancer Site
[in animals: liver & kidney cancer]
Personal Protection/Sanitation
(See protection codes (protect.html))
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet or contaminated
Change:No recommendation
P rovid e: Eyewash, Quick drench
First Aid
(See procedures (firstaid.html))
Eye:Irrigate immediately
Skin:Soap wash promptly
Breathing:Respiratory support
Swallow:Medical attention immediately
Respirator Recommendations
NIOSH
Exhibit 2 773

See also
INTRODUCTION ICSC CARD: 0027 MEDICAL TESTS: 0047
Follow N IOSH
Facebook ( http://www.facebook.com/NIOSH)
Flickr ( http://www.flickr.com/photos/NIOSH)
Pinterest ( http://www.pinterest.com/Cdcgov/workplace-safety-and-health/) Twitter ( http://twitter.com/NIOSH)
YouTube ( http://www.youtube.com/user/NIOSHSafetyVideos) NIOSH Homepage

NIOSH A-Z
Workplace Safety & Health Topics
Publications and Products
Programs
Contact NIOSH
File Formats Help:

Exhibit 2 774

0 U Centers for Disease Control and Prevention
CDC 24/7: Saving Lives, Protecting People —
.....lie ICIatioriia IIrIStitLite fOl" C CCLIpatioria I Safety mild (Idea th (ICIIIC SIFT) NIOSH Pocket Guide to Chemical Hazards
Chromium metal
Synonyms &Trade Names
Chrome, Chromium
CAS No. RTECS No.
7440-47-3 GBA200000
Formula Conversion
Cr
Exposure Limits

NIOSH REL
TWA 0.5 mg/m3 See Appendix C

OSHA PEL
TWA 1 mg/m3 See Appendix C [xNote:

The PEL also applies to insoluble
chromium salts.]
hmmolingproduclivewnrkplaces /fow
(hrough safely and health research
IDLH
250 mg/m3 (as Cr)
See: 744o47�
Measurement Methods
NIOSH 7024, 7300, 7q_01 , 7303,
0102;
OSHA ID121
(httns: / / www.osha . eov /dts/sltc /methods /inor
anie./id121/idi2I.htmI) , ID125G
(httus: / / www.osha . eov /dts/sltc /methods /inore
anic/id12 ee/id12,e.html)
See: NMAM or OSHA Methods
(httns: / / www.osha . eov /dts/sltc /methods /index.
html
Physical Description
Blue -white to steel -gray, lustrous, brittle, hard, odorless solid.

Molecul
Boiling
Melting
Solubili
Vapor lonizati
a
Point
Point
ty
Pressur on
Weight
a Potenti
4788°
3452°
Insolu
al

52.0 F
F
ble
Exhibit 2 776

o NA
mmH
g
(appro
x)
Specific Flash Upper
Lower
Gravity Point Exposiv
Explosi
e Limit
ve Limit

7.14 NA
NA
NA
Noncombustible Solid in bulk form, but finely divided dust burns rapidly if heated in a flame.

Incompatibilities & Reactivities
Strong oxidizers (such as hydrogen peroxide), alkalis
Exposure Routes
inhalation, ingestion, skin and/or eye contact
Symptoms
irritation eyes, skin; lung fibrosis (histologic)
Target Organs
Eyes, skin, respiratory system
Personal Protection/Sanitation
(See protection codes)
Skin:No recommendation
Eyes:No recommendation
Wash skin: No recommendation
Remove:No recommendation
Change:No recommendation
Respirator Recommendations
First Aid
(See procedures)
Eye:Irrigate immediately
Skin: Soap wash
Breathing: Respiratory support
Swallow:Medical attention
immediately
NIOSH
Up to 2.5 mg/m3:
(APF = 5) Any quarter -mask respirator.

Click here for information on selection of N, R, or P filters.' Exhibit 2 777

UP to 5 mg/m3:
(APF = 1o) Any particulate respirator equipped with an N95, R95, or P95 filter (including N95, R95, and P95 filtering facepieces) except quarter -mask respirators.

The following filters may also be used: N99, R99, P99, Moo, R> oo, Pioo.

Click here for information on selection of N, R, or P filters.' (APF = 1o) Any supplied -air respirator'
UP to 12.5 mg/m3:
(APF = 25) Any supplied -air respirator operated in a continuous -flow mode- (APF = 25) Any powered, air -purifying respirator with a high -efficiency particulate filter.' -
UP to 25 mg/m3:
(APF = 5o) Any air -purifying, full-facepiece respirator with an Moo, R> oo, or Pioo filter.

Click here for information on selection of N, R, or P filters. (APF = 5o) Any powered, air -purifying respirator with a tight -fitting facepiece and a high -efficiency particulate filter'
(APF = 5o) Any self-contained breathing apparatus with a full facepiece (APF = 5o) Any supplied -air respirator with a full facepiece UP to 250 mg/m3:
(APF = 2000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode
Emergency or Planned entry into unknown concentrations or IDLH conditions:
(APF = io,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode (APF = io,000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode in combination with an auxiliary self-contained positive -pressure breathing apparatus
Escape:
(APF = 5o) Any air -purifying, full-facepiece respirator with an Moo, R> oo, or Pioo filter.

Click here for information on selection of N, R, or P filters.

Any appropriate escape -type, self-contained breathing apparatus Important additional information about respirator selection See also
INTRODUCTION ICSC CARD: 002()(httus:// www.ilo.orz/dvn/icsc/showearcLdisuliv ? u lanz=en&a) card id=0020&-D vei.sion=2)
Page last reviewed: November 29, 2018
Content source: National Institute for Occupational Safety and Health Exhibit 2 778

8/7/2020 CDC - NIOSH Pocket Guide to Chemical Hazards - Selenium ZUCenters for Disease
, Control and Prevention
The National Institute for Occupational Safety and Health (NIOSH)
CAS No.
7782-49-2
Exposure Limits
RTECS No.
f�6�rL1i1i111.

NIOSH REL
TWA 0.2 mg/m3 [*Note: The REL also applies to other
selenium compounds (as Se) except Selenium
hexafluoride.]

OSHA PEL
TWA 0.2 mg/m3 [*Note: The PEL also applies to other
selenium compounds (as Se) except Selenium
hexafluoride.]
Molecular
Weight

79.0 Combustible Solid
r�m�11r�d� N4�fwl�:�rvre"+rk;�dr�Slq�1f Mris #gtt s wf�ily and MOM rawarriro o �� DOT ID & Guide
2658 152(powder)
Measurement Methods
NIOSH S190 (11-7) , 7300 , 7301 , 7303, 9102;
OSHA ID121
See: NMAM or OSHA Methods
Boiling Point Melting Point Solubility
12651F 392°F Insoluble
Vapor
Pressure
0 mmHg
(approx)
Ionization
Potential
NA
Exhibit 2 779
https://www.cdc.gov/niosh/npg/npgd0550.html 1 /3

8/7/2020
Exposure Routes
CDC - NIOSH Pocket Guide to Chemical Hazards - Selenium inhalation, ingestion, skin and/or eye contact
Target Organs
Eyes, skin, respiratory system, liver, kidneys, blood, spleen Personal Protection/Sanitation First Aid
(See protection codes)
Skin:Prevent skin contact
Eyes:No recommendation
Wash skin:When contaminated
Remove:When wet or contaminated
Change:No recommendation
Provide:Quick drench
(See procedures)
Eye:lrrigate immediately
Skin:Soap wash immediately
Breathing:Respiratory support
Swallow:Medical attention immediately
Exhibit 2 780
https://www.cdc.gov/niosh/npg/npgd0550.html 2/3

8/7/2020
CDC - NIOSH Pocket Guide to Chemical Hazards - Selenium See also
INTRODUCTION ICSC CARD: 0072
Page last reviewed: October 30, 2019
Exhibit 2 781
https://www.cdc.gov/niosh/npg/npgd0550.html 3/3

3/11/2020 CDC - NIOSH Pocket Guide to Chemical Hazards - Tetrachloroethylene ZUCenters for Disease
, Control and Prevention
The National Institute for Occupational Safety and Health (NIOSH)
CAS No. RTECS No.
127-18-4 KX3850000
Exposure Limits

NIOSH REL
Ca Minimize workplace exposure concentrations. See
Appendix A

OSHA PEL
TWA 100 ppm
C 200 ppm (for 5 minutes in any 3-hour period), with a
maximum peak of 300 ppm
See Appendix G
through s productive health
research
�*
through safety and l Rn�aa0ti6� Reseaectrn 1470
DOT ID & Guide
1897 160
Measurement Methods
NIOSH 1003;
OSHA 1001
See: NMAM or OSHA Methods
Molecular Boiling Point Freezing Point Solubility Vapor Ionization Weight Pressure Potential
250°F -2°F 0.02%
165.8 14 mmHg 9.32 eV
Noncombustible Liquid, but decomposes in a fire to hydrogen chloride and phosgene.

Exhibit 2 782
https://www.cdc.gov/niosh/npg/npgd0599.html 1 /2

3/11/2020
Exposure Routes
CDC - NIOSH Pocket Guide to Chemical Hazards - Tetrachloroethylene inhalation, skin absorption, ingestion, skin and/or eye contact Target Organs
Eyes, skin, respiratory system, liver, kidneys, central nervous system Personal Protection/Sanitation
(See protection codes)
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet or contaminated
Change:No recommendation
Provide: Eyewa s h, Quick drench
See also
INTRODUCTION ICSC CARD: 0076 MEDICAL TESTS: 0179
First Aid
(See procedures)
Eye:lrrigate immediately
Skin:Soap wash promptly
Breathing:Respiratory support
Swallow:Medical attention immediately
Page last reviewed: October 4, 2019
Exhibit 2 783
https://www.cdc.gov/niosh/npg/npgd0599.html 2/2

3/11/2020 CDC - NIOSH Pocket Guide to Chemical Hazards - Trichloroethylene ZUCenters for Disease
, Control and Prevention
The National Institute for Occupational Safety and Health (NIOSH)
CAS No. RTECS No.
79-01-6 KX4550000
Exposure Limits

NIOSH REL
Ca See Appendix A See Appendix C

OSHA PEL
TWA 100 ppm C 200 ppm 300 ppm (5-minute maximum
peak in any 2 hours) See Appendix G
Promoting productive workptaces I
through safety and health research 1470 ( 111�*
DOT ID & Guide
1710160
Measurement Methods
NIOSH 1022, 3800;
OSHA 1001
See: NMAM or OSHA Methods
Molecular Boiling Point Freezing Point Solubility Vapor Ionization Weight Pressure Potential
189°F -99°F 0.1%
131.4 58 mmHg 9.45 eV
Combustible Liquid, but burns with difficulty.

Exhibit 2 784
https://www.cdc.gov/niosh/npg/npgd0629.html 1/2

3/11 /2020
Exposure Routes
CDC - NIOSH Pocket Guide to Chemical Hazards - Trichloroethylene inhalation, skin absorption, ingestion, skin and/or eye contact Target Organs
Eyes, skin, respiratory system, heart, liver, kidneys, central nervous system Personal Protection/Sanitation First Aid
(See protection codes)
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:When contaminated
Remove:When wet or contaminated
Change:No recommendation
Provide: Eyewa s h, Quick drench
See also
INTRODUCTION ICSC CARD: 0081 MEDICAL TESTS: 0236
(See procedures)
Eye:lrrigate immediately
Skin:Soap wash promptly
Breathing:Respiratory support
Swallow:Medical attention immediately
Page last reviewed: October 4, 2019
Exhibit 2 785
https://www.cdc.gov/niosh/npg/npgd0629.html 2/2

ImCenters for Disease Control and Prevention
CDC 24/7: Saving Lives, Protecting People T
��^��"��=��K��o��
'uu�.. National Institute �«�� v~~.~�.uu�u..~~.�� x��v��y ..~~��..alth (NIOSH)
Lead
Synonyms &TradeNames
Lead metal, P|umbum
CAS No. RTE[3Mo.
7439'92'1 OF7525000
Fomnm|o Conversion
Pb
Exposure Limits
N|OSHREL
TWA (8-hour)O.O5Omg/m3See Appendix C[+Note:The
RELalso applies toother lead compounds (as Pb) —
seeAppendix C]

OSHA PEL
[191O1O25]TWA O.O5Omg/m3See Appendix C[+Note:

The PELalso applies toother lead compounds (as Pb)
see Appendix C]
Physical Description
Aheavy ductile, soft, gray solid.

Promoting productive workplaces
through safety and health research /ZTJDW
DOT |D&Guide
|DLH
1OOmg/m3(as Pb)
Measurement Methods
N|OSH7O82.71O5.73OO.73O1.73O3.77OO.77O1.
7702.9100.9102.9105;
OSHA |D2O6.|D121 .|D125G
See: NMAM or OSHA Methods
Molecular Boiling Point Melting Point Solubility Vapor Ionization Weight Pressure Potential
3104"F 021"F Insoluble
207.2 OmmHg NA
(approx)
Flash Point

Specific Upper Lower
Gravity NA Exposive Explosive
Limit Limit

11.34 NA NA
Noncombustible Solid in bulk form.

Incompatibilities & Reactivities
Strong oxidizers, hydrogen peroxide, acids
Exposure Routes
inhalation, ingestion, skin and/or eye contact
M
lassitude (weakness, exhaustion), insomnia; facial pallor; anorexia, weight loss, malnutrition; constipation, abdominal pain, colic; anemia; gingival lead line; tremor; paralysis wrist, ankles; encephalopathy; kidney disease; irritation eyes; hypertension
Target Organs
Eyes, gastrointestinal tract, central nervous system, kidneys, blood, gingival tissue Personal Protection/Sanitation
(See protection codes)
Skin:Prevent skin contact
Eyes:Prevent eye contact
Wash skin:Daily
Remove:When wet or contaminated
Change:Daily
(See Appendix E)

NIOSH/OSHA
First Aid
(See procedures)
Eye:lrrigate immediately
Skin:Soap flush promptly
Breathing: Respiratory support
Swallow:Medical attention immediately
Up to 0.5 mg/m3:
(APF = 10) Any air -purifying respirator with an N100, R100, or P100 filter (including N100, R100, and P100 filtering facepieces) except quarter -mask respirators.

Click here for information on selection of N, R, or P filters. (APF = 10) Any supplied -air respirator
Exhibit 2 787

Up to 1.25 mg/m3:
(APF = 25) Any supplied -air respirator operated in a continuous -flow mode (APF = 25) Any powered, air -purifying respirator with a high -efficiency particulate filter.

Up to 2.5 mg/m3:
(APF = 50) Any air -purifying, full-facepiece respirator with an N100, R100, or P100 filter.

Click here for information on selection of N, R, or P filters. (APF = 50) Any supplied -air respirator that has a tight -fitting facepiece and is operated in a continuous -flow mode (APF = 50) Any powered, air -purifying respirator with a tight -fitting facepiece and a high -efficiency particulate filter (APF = 50) Any self-contained breathing apparatus with a full facepiece (APF = 50) Any supplied -air respirator with a full facepiece Up to 50 mg/m3:
(APF = 1000) Any supplied -air respirator operated in a pressure -demand or other positive -pressure mode Up to 100 mg/m3:
(APF = 2000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode
Emergency or planned entry into unknown concentrations or IDLH conditions:
(APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode
(APF = 10,000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode in combination with an auxiliary self-contained positive -pressure breathing apparatus (APF = 50) Any air -purifying, full-facepiece respirator with an N100, R100, or P100 filter.

Click here for information on selection of N, R, or P filters.

Any appropriate escape -type, self-contained breathing apparatus Important additional information about respirator selection INTRODUCTION ICSCCARD:0052 MEDICAL TESTS:0127
Page last reviewed: November 29, 2018
Content source: National Institute for Occupational Safety and Health Exhibit 2 788

M Centers for Disease Control and Prevention
_ CDC 24/7. Saving Lives. Protecting People-
C I 1 tt r1: s 1lr1
Promoting productive workplaces
fhnaugfr safety and heeflGlrt research /Mmsm.

Chromic acid and chromates

SYNONYMS & TRADE NAMES
Chromic acid (CrOA Chromic anhydride, Chromic oxide, Chromium(VI) oxide (1:3), Chromium trioxide, Zinc chromate CAS NO. RTECS NO.
1333-82-0(Cr03) GB66S0000(CrO,)

FORMULA
CrO,(acid)

EXPOSURE LIMITS

CONVERSION

NIOSH REL
(as Cr): Ca TWA 0.0002 mg/m3 (8-hours) See Appendix A See Appendix C

OSHA PEL
(as CrO3): TWA 0.005 mg/m3 See Appendix C

DOT ID & GUIDE
17SS 1 S4(acid solution)
1463 141(acid, solid)
IDLH
Ca [1 S mg/m3 {as Cr(Vp}]
See:1333820

MEASUREMENT METHODS
NIOSH 7600, 7604, 7605 , 7703, 9101;
OSHA ID103, ID21 S, W4001
See: NMAM or OSHA Methods

PHYSICAL DESCRIPTION
CrO3: Dark -red, odorless flakes or powder. [Note: Often used in an aqueous solution (H2CrO4).1

MOLECULAR WEIGHT

BOILING POINT

MELTING POINT

SOLUBILITY VAPOR PRESSURE IONIZATION POTENTIAL
100.0
4820F(Decomposes)
3870F(Decomposes)
63% Very low NA

SPECIFIC GRAVITY

FLASH POINT

UPPER EXPLOSIVE LIMIT

LOWER EXPLOSIVE LIMIT

2.70(Cr03)
NA
NA
NA
CrO3: Noncombustible Solid, but will accelerate the burning of combustible materials.

INCOMPATIBILITIES & REACTIVITIES
Combustible, organic, or other readily oxidizable materials (paper, wood, sulfur, aluminum, plastics, etc.); corrosive to metals

EXPOSURE ROUTES
inhalation, ingestion, skin and/or eye contact

SYMPTOMS
irritation respiratory system; nasal septum perforation; liver, kidney damage; leukocytosis (increased blood leukocytes), leukopenia (reduced blood leukocytes), eosinophilia; eye injury, conjunctivitis; skin ulcer, sensitization dermatitis; [potential occupational carcinogen]

TARGET ORGANS
Blood, respiratory system, liver, kidneys, eyes, skin

CANCER SITE
[lung cancer]

PERSONAL PROTECTION/SANITATION FIRST AID
(See protection codes) (See procedures)
Skin:Prevent skin contact Eye:lrrigate immediately
Eyes:Prevent eye contact Skin:Soap flush immediately
Wash skin:When contaminated
Exhibit 2 789

Remove:When wet or contaminated
Change:Daily
Provide: Eyewash, Quick drench
Breathing:Respiratory support
Swallow:Medical attention immediately

RESPIRATOR RECOMMENDATIONS
NIOSH
At concentrations above the NIOSH REL, or where there is no REL, at any detectable concentration:
(APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode (APF= 10,000) Any supplied -air respirator that has a full facepiece and is operated in a pressure -demand or other positive -pressure mode in combination with an auxiliary self-contained positive -pressure breathing apparatus
Escape:
(APF= SO) Any air -purifying, full-facepiece respirator with an N100, R100, or P100 filter.

Click here for information on selection of N, R, or P filters.

Any appropriate escape -type, self-contained breathing apparatus Important additional information about respirator selection

SEE ALSO
INTRODUCTION ICSCCARD:1194 MEDICAL TESTS: OOS1
Page last reviewed: October 30, 2019
Content source: National Institute for Occupational Safety and Health Exhibit 2 790

GSI Job No.: 5550
Exhibit 2 791

N°,��111111111`��11��11�111111� Safety Data Sheet rreP-4614 mcdang oul"Pla�r�el' This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015

1.1. Product identifier
Product form
Name
CAS No
Formula
Other means of identification
Substance
Isobutylene
115-11-7
C4H8 / CH2=C(CH3)2
Isobutene, 2-methylpropene

1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Industrial use. Use as directed.

1.3. IDetauus of the suppher of the safety data sheet
Praxair, Inc.
10 Riverview Drive
Danbury, CT 06810-6268 - USA
T 1-800-772-9247 (1-800-PRAXAI R) - F 1-716-879-2146
www.praxair.com

1.4. Emergency telephone number
Emergency number : Onsite Emergency: 1-800-645-4633
CHEMTREC, 24hr/day 7days/week
—Within USA: 1-800-424-9300, Outside USA: 001-703-527-3887 (collect calls accepted, Contract 17729)
lun niin ni n i ni i i nnn i i i imi nnn iN n lion i ioi n i i i i i i i not n i n i i

2.1. Classification of the substance or mixture
GIIIIS•••US classification
Flam. Gas 1 H220
Liquefied gas H280

2.2. Label elements
GIIIIS•••US labeling
Hazard pictograms (GHS-US)
001V
GHS02 GHSO4
Signal word (GHS-US) DANGER
Hazard statements (GHS-US) H220 - EXTREMELY FLAMMABLE GAS H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED OSHA-H01 - MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION CGA-HG04 - MAY FORM EXPLOSIVE MIXTURES WITH AIR
CGA-HG01 - MAY CAUSE FROSTBITE
Precautionary statements (GHS-US) P202 - Do not handle until all safety precautions have been read and understood P210 - Keep away from Heat, Open flames, Sparks, Hot surfaces. - No smoking P271+P403 - Use and store only outdoors or in a well -ventilated place P377 - Leaking gas fire: Do not extinguish, unless leak can be stopped safely P381 - Eliminate all ignition sources if safe to do so
CGA-PG05 - Use a back flow preventive device in the piping CGA-PG12 - Do not open valve until connected to equipment prepared for use CGA-PG06 - Close valve after each use and when empty
CGA-PG11 - Never put cylinders into unventilated areas of passenger vehicles CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F) EN (English US) SIDS ID: P-4614 1/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 792

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 mcdang oul"Pla�r�el' This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015

2.3. Other hazards
Other hazards not contributing to the None.
classification

2.4. Unknown acute toxicity (GHS US)
No data available

3.1. Substance
Name Product identifier %
.......Isobut....lene.......................................................................................................................................................................................... 115-11-7 100 Y (CAS No)
Main constituent)
)

3.2. Mixture
Not applicable

4.1. Description of first aid measures
First -aid measures after inhalation
Remove to fresh air and keep at rest in a position comfortable for breathing. If not breathing, give artificial respiration. If breathing is difficult, trained personnel should give oxygen. Call a physician.

First -aid measures after skin contact
The liquid may cause frostbite. For exposure to liquid, immediately warm frostbite area with warm water not to exceed 105°F (41°C). Water temperature should be tolerable to normal skin. Maintain skin warming for at least 15 minutes or until normal coloring and sensation have returned to the affected area. In case of massive exposure, remove clothing while showering with warm water. Seek medical evaluation and treatment as soon as possible.

First -aid measures after eye contact
Immediately flush eyes thoroughly with water for at least 15 minutes. Hold the eyelids open and away from the eyeballs to ensure that all surfaces are flushed thoroughly. Contact an ophthalmologist immediately.

First -aid measures after ingestion
Ingestion is not considered a potential route of exposure.

4.2. Most important symptoms and effects, both acute and delayed No additional information available

4.3. Indication of any immediate medical attention and special treatment needed None.

5.1. Extinguishing media
Suitable extinguishing media
Carbon dioxide, Dry chemical, Water spray or fog.

5.2. Special hazards arising from the substance or mixture Fire hazard
EXTREMELY FLAMMABLE GAS. If venting or leaking gas catches fire, do not extinguish flames. Flammable vapors may spread from leak, creating an explosive reignition hazard.

Vapors can be ignited by pilot lights, other flames, smoking, sparks, heaters, electrical equipment, static discharge, or other ignition sources at locations distant from product handling point. Explosive atmospheres may linger. Before entering an area, especially a confined area, check the atmosphere with an appropriate device.

Explosion hazard
EXTREMELY FLAMMABLE GAS. Forms explosive mixtures with air and oxidizing agents.

Reactivity
No reactivity hazard other than the effects described in sub -sections below.

5.3. Advice for firefighters
Firefighting instructions
DANGER: FLAMMABLE LIQUID AND VAPOR. Evacuate all personnel from danger area. Use self-contained breathing apparatus. Immediately cool surrounding containers with water spray from maximum distance, taking care not to extinguish flames. Avoid spreading burning liquid with water. Remove ignition sources if safe to do so. If flames are accidentally extinguished, explosive reignition may occur. Reduce vapors with water spray or fog. Stop flow of liquid if safe to do so, while continuing cooling water spray. Remove all containers from area of fire if safe to do so. Allow fire to burn out. On -site fire brigades must comply with OSHA 29 CFR 1910.156 and applicable standards under 29 CFR 1919 Subpart L - Fire Protection.

EN (English US) SIDS ID: P-4614 2/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 793

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 mcdang oul"Pla�fl'el' This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Special protective equipment for fire fighters Standard protective clothing and equipment (Self Contained Breathing Apparatus) for fire fighters.

Other information Containers are equipped with a pressure relief device. (Exceptions may exist where authorized by DOT.).

6.1. Personal precautions, protective equipment and emergency procedures General measures DANGER: Flammable, liquefied gas. FORMS EXPLOSIVE MIXTURES WITH AIR.

Immediately evacuate all personnel from danger area. Use self-contained breathing apparatus where needed. Remove all sources of ignition if safe to do so. Reduce vapors with fog or fine water spray, taking care not to spread liquid with water. Shut off flow if safe to do so. Ventilate area or move container to a well -ventilated area. Flammable vapors may spread from leak and could explode if reignited by sparks or flames. Explosive atmospheres may linger. Before entering area, especially confined areas, check atmosphere with an appropriate device.

6.1.1. Il:::or non emergency personnel

6.1.2. Il:::or emergency responders

6.2. Environmental precautions
No additional information available
No additional information available
Try to stop release. Prevent waste from contaminating the surrounding environment. Prevent soil and water pollution. Dispose of contents/container in accordance with local/regional/national/international regulations. Contact supplier for any special requirements.

6.3. Methods and material for containment and cleaning up No additional information available

6.4. Reference to other sections
See also sections 8 and 13.

7.1. Precautions for safe handling
Precautions for safe handling Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only non -sparking tools. Use only explosion -proof equipment Wear leather safety gloves and safety shoes when handling cylinders. Protect cylinders from physical damage; do not drag, roll, slide or drop. While moving cylinder, always keep in place removable valve cover. Never attempt to lift a cylinder by its cap; the cap is intended solely to protect the valve. When moving cylinders, even for short distances, use a cart (trolley, hand truck, etc.) designed to transport cylinders. Never insert an object (e.g, wrench, screwdriver, pry bar) into cap openings; doing so may damage the valve and cause a leak. Use an adjustable strap wrench to remove over -tight or rusted caps. Slowly open the valve. If the valve is hard to open, discontinue use and contact your supplier. Close the container valve after each use; keep closed even when empty. Never apply flame or localized heat directly to any part of the container. High temperatures may damage the container and could cause the pressure relief device to fail prematurely, venting the container contents. For other precautions in using this product, see section 16.

EN (English US) SIDS ID: P-4614 3/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 794

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 mcdang rat lr pla�rfea This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015

7.2. Conditions for safe storage, including any incompatibilities Storage conditions Store only where temperature will not exceed 125°F (52°C). Post "No Smoking/No Open Flames" signs in storage and use areas. There must be no sources of ignition. Separate packages and protect against potential fire and/or explosion damage following appropriate codes and requirements (e.g, NFPA 30, NFPA 55, NFPA 70, and/or NFPA 221 in the U.S.) or according to requirements determined by the Authority Having Jurisdiction (AHJ). Always secure containers upright to keep them from falling or being knocked over. Install valve protection cap, if provided, firmly in place by hand when the container is not in use. Store full and empty containers separately. Use a first -in, first -out inventory system to prevent storing full containers for long periods. For other precautions in using this product, see section 16 OTHER PRECAUTIONS FOR HANDLING, STORAGE, AND USE: When handling product under pressure, use piping and equipment adequately designed to withstand the pressures to be encountered. Never work on a pressurized system. Use a back flow preventive device in the piping. Gases can cause rapid suffocation because of oxygen deficiency; store and use with adequate ventilation. If a leak occurs, close the container valve and blow down the system in a safe and environmentally correct manner in compliance with all international, federal/national, state/provincial, and local laws; then repair the leak. Never place a container where it may become part of an electrical circuit.

7.3. Specific end use(s)
None.

8.1. Control parameters
Isobutylene (115-11-7)
.............................................................................................................................................................

ACGIH ACGIH TLV-TWA (ppm) 250 ppm

8.2. Exposure controls
Appropriate engineering controls Use an explosion -proof local exhaust system. Local exhaust and general ventilation must be adequate to meet exposure standards. MECHANICAL (GENERAL): Inadequate - Use only in a closed system. Use explosion proof equipment and lighting.

Eye protection Wear safety glasses when handling cylinders; vapor -proof goggles and a face shield during cylinder changeout or whenever contact with product is possible. Select eye protection in accordance with OSHA 29 CFR 1910.133.

Skin and body protection Wear metatarsal shoes and work gloves for cylinder handling, and protective clothing where needed. Wear appropriate chemical gloves during cylinder changeout or wherever contact with product is possible. Select per OSHA 29 CFR 1910.132, 1910.136, and 1910.138.

Respiratory protection When workplace conditions warrant respirator use, follow a respiratory protection program that meets OSHA 29 CFR 1910.134, ANSI Z88.2, or MSHA 30 CFR 72.710 (where applicable).

Use an air -supplied or air -purifying cartridge if the action level is exceeded. Ensure that the respirator has the appropriate protection factor for the exposure level. If cartridge type respirators are used, the cartridge must be appropriate for the chemical exposure. For emergencies or instances with unknown exposure levels, use a self-contained breathing apparatus (SCBA).

Thermal hazard protection Wear cold insulating gloves when transfilling or breaking transfer connections.

9.1. lnformatlon on basic physical and chemical properties Physical state : Gas
Molecular mass
Color
Odor
Odor threshold
pH
Relative evaporation rate (butyl acetate=1)
Relative evaporation rate (ether=1)
Melting point
Freezing point
56 g/mol
Colorless.

Poor warning properties at low concentrations. Sweetish.

Odor threshold is subjective and inadequate to warn for overexposure.

Not applicable.

No data available
Not applicable.
-140.3 °C
No data available
EN (English US) SIDS ID: P-4614 4/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 795

IsobutyleShne
Safety Data eet P-4614
mcdang oul-pbH'a,
This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 ........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Boiling point
-6.9 'C
Flash point
-80 oC (closed cup)
Critical temperature
144.7 oC
Auto -ignition temperature
465 oC
Decomposition temperature
No data available
Flammability (solid, gas)

1.8 - 8.8 Vol %
Vapor pressure
260 kPa
Critical pressure
4000 kPa
Relative vapor density at 20 oC
No data available
Relative density

0.63 Density

0.599 g/CM3 (at 20 OC)
Relative gas density
2 Solubility
Water: 388 mg/l
Log Pow

2.35 Log Kow
Not applicable.

Viscosity, kinematic
Not applicable.

Viscosity, dynamic
Not applicable.

Explosive properties
Not applicable.

Oxidizing properties
None.

Explosion limits
No data available

9.2. Other unformafion
Gas group
Additional information

10.1. Reacfiviity

10.2. Cherniical stabflfty

10.3. Possiibiifity of hazardous reractiions

10.4. Condffions to avoiid

10.5. Mcompatiib!le materiia!ls

10.6. Hazardous decomposffion products

11.1. Mformabon on toxiico!logiical effects
Liquefied gas
Gas/vapor heavier than air. May accumulate in confined spaces, particularly at or below ground level
No reactivity hazard other than the effects described in sub -sections below.

Stable under normal conditions.

May occur.

High temperature. Catalyst.

Halogens. Oxidizing agents. Acids.

Thermal decomposition may produce : Carbon monoxide. Carbon dioxide.

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 lsxluF2 r�tcral�rr��a rr2arrr�it� five" This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 Skin corrosion/irritation
Not classified
pH: Not applicable.

Serious eye damage/irritation
Not classified
pH: Not applicable.

Respiratory or skin sensitization
Not classified
Germ cell mutagenicity
Not classified
Carcinogenicity
Not classified
Isobutylene (115-11-7)
....................................................................................................................................................................................................................................

National Toxicology Program (NTP) Status
..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... 1 -Evidence of Carcinogenicity
Reproductive toxicity
Not classified
Specific target organ toxicity (single exposure)
Not classified
Specific target organ toxicity (repeated
Not classified
exposure)
Aspiration hazard
Not classified
" III. �� IIII m et ro m i m

12.1. Toxicity
Ecology - general
No known ecological damage caused by this product.

12.2. Persistence and degradability
Isobutylene (115-11-7)
.......................................................................................................................................................................................................................................................

Persistence and degradability
The substance is biodegradable. Unlikely to persist.

12.3. Bioaoournulative potential
Isobutylene (115-11-7)
......................................................................................................................................................................................................................................................

Log Pow

2.35 .......Log....Kow.................................................................................................................................................................................................... .......................................................................................................................................................................................................................................................

Not applicable.

Bioaccumulative potential
Not expected to bioaccumulate due to the low log Kow (log Kow < 4). Refer to section 9.

12.4. Mobility in soul
Isobutylene (115-11-7)
............... ..........................................................................................................................................................................

Mobili.ty....ln...soi.l
No data available.

Ecology - soil
Because of its high volatility, the product is unlikely to cause ground or water pollution.

12.5. Other adverse effects
Effect on ozone layer
None
Effect on the global warming
No known effects from this product

13.1. Waste treatment methods
Waste disposal recommendations Do not attempt to dispose of residual or unused quantities. Return container to supplier.

In accordance with DOT
Transport document description UN1055 Isobutylene, 2.1
UN-No.(DOT) UN1055
Proper Shipping Name (DOT) Isobutylene
Class (DOT) 2.1 - Class 2.1 - Flammable gas 49 CFR 173.115 EN (English US) SIDS ID: P-4614
MR
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 797

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 Mcdch2g oul-pla�rfea This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 Hazard labels (DOT) 2.1 - Flammable gas
DOT Special Provisions (49 CFR 172.102) 19 - For domestic transportation only, the identification number UN1075 may be used in place of the identification number specified in column (4) of the 172.101 table. The identification number used must be consistent on package markings, shipping papers and emergency response information
T50 - When portable tank instruction T50 is referenced in Column (7) of the 172.101 Table, the applicable liquefied compressed gases are authorized to be transported in portable tanks in accordance with the requirements of 173.313 of this subchapter Additional information
Emergency Response Guide (ERG) Number 115 (UN1055)
Other information No supplementary information available.

Special transport precautions Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers:
- Ensure there is adequate ventilation. - Ensure that containers are firmly secured. - Ensure cylinder valve is closed and not leaking. - Ensure valve outlet cap nut or plug (where provided) is correctly fitted. - Ensure valve protection device (where provided) is correctly fitted.

Trans port by sea
UN -No. (IMDG)
Proper Shipping Name (IMDG)
Class (IMDG)
M FAG -No
Aiir transport
UN -No. (IATA)
Proper Shipping Name (IATA)
Class (IATA)
Civil Aeronautics Law

15.1. US Federal regulations

15.2. International regulations

CANA DA
1055

ISOBUTYLENE
2 - Gases
115
1055
Isobutylene
2 Gases under pressure/Gases flammable under pressure
Isobutylene (115-11-7)
.............................................................................................................................................................................................................................................................

Listed on the Canadian DSL (Domestic Substances
II:::IU•••Regulations
EN (English US)
SIDS ID: P-4614
7/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 798

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 mcdch2g rat l-pla�rfea This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 Isobutylene (115-11-7)
.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substa

15.2.2. Natiionall regulations
Isobutvlene (115-11-71
Listed on the AICS (Australian Inventory of Chemical Substances) Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China) Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances) Listed on INSQ (Mexican National Inventory of Chemical Substances)

15.3. US State regulations
Isobutylene(115-11-7)
U.S. - California - Proposition 65 - Carcinogens List
No
U.S. - California - Proposition 65 - Developmental
No
Toxicity
U.S. - California - Proposition 65 - Reproductive
No
Toxicity - Female
U.S. - California - Proposition 65 - Reproductive
No
Toxicity - Male
State or local regulations
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List U.S. - Pennsylvania - RTK (Right to Know) List
Other information When you mix two or more chemicals, you can create additional, unexpected hazards. Obtain and evaluate the safety information for each component before you produce the mixture.

Consult an industrial hygienist or other trained person when you evaluate the end product.

Before using any plastics, confirm their compatibility with this product Praxair asks users of this product to study this SIDS and become aware of the product hazards and safety information. To promote safe use of this product, a user should (1) notify employees, agents, and contractors of the information in this SIDS and of any other known product hazards and safety information, (2) furnish this information to each purchaser of the product, and (3) ask each purchaser to notify its employees and customers of the product hazards and safety information
The opinions expressed herein are those of qualified experts within Praxair, Inc. We believe that the information contained herein is current as of the date of this Safety Data Sheet. Since the use of this information and the conditions of use are not within the control of Praxair, Inc, it is the user's obligation to determine the conditions of safe use of the product Praxair SDSs are furnished on sale or delivery by Praxair or the independent distributors and suppliers who package and sell our products. To obtain current SDSs for these products, contact your Praxair sales representative, local distributor, or supplier, or download from www.praxair.com . If you have questions regarding Praxair SDSs, would like the document number and date of the latest SIDS, or would like the names of the Praxair suppliers in your area, phone or write the Praxair Call Center (Phone: 1-800-PRAXAIR/1-800-772-9247; Address: Praxair Call Center, Praxair, Inc, P.O. Box 44, Tonawanda, NY 14151-0044) PRAXAIR and the Flowing Airstream design are trademarks or registered trademarks of Praxair Technology, Inc. in the United States and/or other countries.

EN (English US) SIDS ID: P-4614 8/9
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 799

Iso
N°,��111111111`��11��11�111111� Safety rData Srheet P-4614 mcdch2gOul"Plcrrlel' This SIDS conforms to U.S. Code of Federal Regulations 29 CFR 1910.1200, Hazard Communication.

Date of issue: 01/01/1979 Revision date: 10/17/2016 Supersedes: 02/27/2015 NFPA health hazard 2 - Intense or continued exposure could cause temporary incapacitation or possible residual injury unless prompt medical attention is given.

NFPA fire hazard 4 - Will rapidly or completely vaporize at normal pressure and temperature, or is readily dispersed in air and will burn readily.

NFPA reactivity 1 - Normally stable, but can become unstable at elevated temperatures and pressures or may react with water with some release of energy, but not violently.

II-11MIIS IIIIII Rating
Health 1 Slight Hazard - Irritation or minor reversible injury possible Flammability 4 Severe Hazard
Physical 2 Moderate Hazard
SIDS US (GHS HazCom 2012) - Praxair
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product.

EN (English US)
SIDS ID: P-4614
This document is only controlled while on the Praxair, Inc. website and a copy of this controlled version is available for download. Praxair cannot assure the integrity or accuracy of any version of this document after it has been downloaded or removed from our website.

Exhibit 2 800

Methanol
ECI�� Safaccoety to Data Sheet
R g aatVol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations of
I'.:J6' 11 A G N' 0 $ I C 5 ' c• Date of issue: 07/03/2013 Revision date: 03/08/2019 Supersedes: 12/12/2017 Version: 1.3 Product form
Substance
Substance name
Methanol
CAS -No.
67-56-1
Product code
VT430
Formula
CH4O
Synonyms
acetone alcohol / alcohol C1 / alcohol, methyl / carbinol / colonial spirits / columbian spirits / green wood spirits / manhattan spirits / methyl alcohol / methyl hydrate / methyl hydroxide / methylen / methylol / m onohyd roxym ethane / pyroligneous spirit / pyroxylic spirit / wood alcohol / wood naphtha
Use of the substance/mixture Solvent
Recommended use Laboratory chemicals
Restrictions on use Not for food, drug or household use Val Tech Diagnostics, A Division of LabChem Inc
Jackson's Pointe Commerce Park Building 1000
1010 Jackson's Pointe Court
Zelienople, PA 16063
T 412-826-5230
F 724-473-0647
Emergency number : CHEMTREC: 1-800-424-9300 or +1-703-741-5970 GHS US classification
Flammable liquids Category 2
H225
Highly flammable liquid and vapour
Acute toxicity (oral) Category 3
H301
Toxic if swallowed
Acute toxicity (dermal) Category 3
H311
Toxic in contact with skin
Acute toxicity (inhalation) Category 3
H331
Toxic if inhaled
Specific target organ toxicity (single exposure)
H370
Causes damage to organs (liver, kidneys, central nervous system, optic nerve) Category 1
(Dermal, oral)
Full text of H statements : see section 16
GHS US labeling
Hazard pictograms (GHS US) 00000W1111111�1111111111111111 0000
iioiIIIIppo 0VOVVW
oiioiii
Signal word (GHS US) Danger
Hazard statements (GHS US) H225 - Highly flammable liquid and vapour H301+H311+H331 - Toxic if swallowed, in contact with skin or if inhaled H370 - Causes damage to organs (liver, kidneys, central nervous system, optic nerve) (Dermal, oral)
Precautionary statements (GHS US) P210 - Keep away from heat, sparks, open flames, hot surfaces. - No smoking.

P233 - Keep container tightly closed.

P240 - Ground/bond container and receiving equipment.

P241 - Use explosion -proof electrical, ventilating, lighting equipment.

P242 - Use only non -sparking tools.

P243 - Take precautionary measures against static discharge.

P260 - Do not breathe mist, vapors, spray.
02/18/2020 EN (English US) Page 1
Exhibit 2 801

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations P264 - Wash exposed skin thoroughly after handling.

P270 - Do not eat, drink or smoke when using this product.

P271 - Use only outdoors or in a well -ventilated area.

P280 - Wear protective gloves, protective clothing, eye protection, face protection.

P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.

P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P330 - If swallowed, rinse mouth
P361+P364 - Take off immediately all contaminated clothing and wash it before reuse.

P370+P378 - In case of fire: Use carbon dioxide (CO2), powder, alcohol -resistant foam to extinguish
P403+P235 - Store in a well -ventilated place. Keep cool.

P405 - Store locked up.

P501 - Dispose of contents/container to comply with local, state and federal regulations.

Other hazards not contributing to the None.
classification
Not applicable
Substance type Mono -constituent
..

Methanol (CAS -No.) 67-56-1 100 Flam. Liq. 2, H225
(Main constituent) Acute Tox. 3 (Oral), H301
Acute Tox. 3 (Dermal), H311
Acute Tox. 3 (Inhalation), H331
STOT SE 1, H370
Full text of hazard classes and H-statements : see section 16 Not applicable
First -aid measures general
First -aid measures after inhalation
First -aid measures after skin contact
First -aid measures after eye contact
First -aid measures after ingestion
Potential Adverse human health effects and
symptoms
Symptoms/effects after inhalation
Symptoms/effects after skin contact
Symptoms/effects after eye contact
Symptoms/effects after ingestion
Check the vital functions. Unconscious: maintain adequate airway and respiration. Respiratory arrest: artificial respiration or oxygen. Cardiac arrest: perform resuscitation. Victim conscious with labored breathing: half -seated. Victim in shock: on his back with legs slightly raised.

Vomiting: prevent asphyxia/aspiration pneumonia. Prevent cooling by covering the victim (no warming up). Keep watching the victim. Give psychological aid. Keep the victim calm, avoid physical strain.

Remove the victim into fresh air. Immediately consult a doctor/medical service.

Wash immediately with lots of water. Soap may be used. Do not apply (chemical) neutralizing agents. Remove clothing before washing. Consult a doctor/medical service.

Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Take victim to an ophthalmologist if irritation persists.

Rinse mouth with water. Immediately after ingestion, give alcohol to drink. Give nothing to drink. Do not induce vomiting. Immediately consult a doctor/medical service. Take the container/vomit to the doctor/hospital. Call Poison Information Centre ( www.big.be/antigif.htm) .

Toxic in contact with skin. Toxic if swallowed. Toxic if inhaled.

EXPOSURE TO HIGH CONCENTRATIONS: Coughing. Symptoms similar to those listed under ingestion.

Symptoms similar to those listed under ingestion.

Redness of the eye tissue. Lacrimation.

Nausea. Vomiting. AFTER ABSORPTION OF LARGE QUANTITIES: FOLLOWING SYMPTOMS MAY APPEAR LATER: Change in the blood composition. Headache. Feeling of weakness. Abdominal pain. Muscular pain. Central nervous system depression. Dizziness.

Mental confusion. Drunkenness. Coordination disorders. Disturbed motor response.

Disturbances of consciousness. Visual disturbances. Blindness. Respiratory difficulties.

Cramps/uncontrolled muscular contractions.
02/18/2020
Exhibit 2
EN (English US)
802
2/ 10

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Chronic symptoms Red skin. Dry skin. Skin rash/inflammation. Headache. Disturbed tactile sensibility. Visual disturbances. Sleeplessness. Gastrointestinal complaints. Cardiac and blood circulation effects.

Immediately after ingestion, give a glass of strong drink, beer or wine to drink. Hospitalize at once for treatment with the right antidotes.

Suitable extinguishing media Quick -acting ABC powder extinguisher. Quick -acting BC powder extinguisher. Quick -acting class B foam extinguisher. Quick -acting CO2 extinguisher. Class B foam (alcohol -resistant).

Water spray if puddle cannot expand.

Unsuitable extinguishing media Water (quick -acting extinguisher, reel); risk of puddle expansion. Water; risk of puddle expansion.

Fire hazard DIRECT FIRE HAZARD. Highly flammable liquid and vapour. Gas/vapor flammable with air within explosion limits. INDIRECT FIRE HAZARD. May be ignited by sparks.

Explosion hazard DIRECT EXPLOSION HAZARD. Gas/vapour explosive with air within explosion limits.

INDIRECT EXPLOSION HAZARD. may be ignited by sparks. Reactions with explosion hazards: see "Reactivity Hazard".

Firefighting instructions Cool tanks/drums with water spray/remove them into safety. Do not move the load if exposed to heat. Take account of toxic fire -fighting water. Use water moderately and if possible collect or contain it.

Protection during firefighting Do not enter fire area without proper protective equipment, including respiratory protection.

General measures No flames, no sparks. Eliminate all sources of ignition. No naked lights. No smoking. Dike and contain spill.

6.1.1. For non -emergency personnel
Protective equipment Gas -tight suit.

Emergency procedures Keep upwind. Mark the danger area. Consider evacuation. Close doors and windows of adjacent premises. Stop engines and no smoking. No naked flames or sparks. Spark- and explosion -proof appliances and lighting equipment. Keep containers closed. Wash contaminated clothes.

6.1.2. For emergency responders
Protective equipment Equip cleanup crew with proper protection.

Emergency procedures Stop leak if safe to do so. Ventilate area.

Prevent soil and water pollution. Prevent spreading in sewers.

For containment
Methods for cleaning up
No additional information available
Contain released substance, pump into suitable containers. Plug the leak, cut off the supply.

Dam up the liquid spill. Try to reduce evaporation. Measure the concentration of the explosive gas -air mixture. Dilute combustible/toxic gases/vapours with water spray. Take account of toxic/corrosive precipitation water. Provide equipment/receptacles with earthing. Do not use compressed air for pumping over spills.

Take up liquid spill into a non combustible material e.g.: sand, earth, vermiculite slaked lime or soda ash. Scoop absorbed substance into closing containers. Carefully collect the spill/leftovers. Damaged/cooled tanks must be emptied. Do not use compressed air for pumping over spills. Clean contaminated surfaces with an excess of water. Take collected spill to manufacturer/competent authority. Wash clothing and equipment after handling. 02/18/2020
Exhibit 2
EN (English US)
803
3/ 10

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Precautions for safe handling
Use spark -/explosion proof appliances and lighting system. Take precautions against electrostatic charges. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly. Work under local exhaust/ventilation. Comply with the legal requirements. Remove contaminated clothing immediately. Clean contaminated clothing. Handle uncleaned empty containers as full ones.

Thoroughly clean/dry the installation before use. Do not discharge the waste into the drain. Do not use compressed air for pumping over. Keep container tightly closed.

Hygiene measures
Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse.

Incompatible products
Strong oxidizers. Strong bases. Strong acids. Acid anhydrides. Acid chlorides.

Incompatible materials
Direct sunlight. Heat sources. Sources of ignition.

Heat -ignition
KEEP SUBSTANCE AWAY FROM: heat sources. ignition sources.

Prohibitions on mixed storage
KEEP SUBSTANCE AWAY FROM: combustible materials. oxidizing agents. strong acids. (strong) bases. halogens. amines. water/moisture.

Storage area
Store in a cool area. Store in a dry area. Keep container in a well -ventilated place. Fireproof storeroom. Keep locked up. Provide for a tub to collect spills. Provide the tank with earthing.

Unauthorized persons are not admitted. Aboveground. Meet the legal requirements.

Special rules on packaging
SPECIAL REQUIREMENTS: closing. dry. clean. correctly labelled. meet the legal requirements. Secure fragile packagings in solid containers.

Packaging materials
SUITABLE MATERIAL: steel. stainless steel. iron. glass. MATERIAL TO AVOID: lead. aluminium. zinc. polyethylene. PVC.

ACGIH ACGIH TWA (ppm) 200 ppm
ACGIH
ACGIH STEL (ppm)
250 ppm
NIOSH
NIOSH REL (TWA) (mg/m')
250 mg/m'
NIOSH
NIOSH REL (TWA) (ppm)
200 ppm
NIOSH
NIOSH REL (STEL) (mg/m')
325 mg/m'
NIOSH
NIOSH REL (STEL) (ppm)
250 ppm
NIOSH
Remark (NIOSH)
Skin
Appropriate engineering controls Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure. Keep concentrations well below lower explosion limits.

Personal protective equipment:

Safety glasses. Protective clothing. Gloves. Full protective flameproof clothing. Face shield.

Materials for protective clothing:

GIVE GOOD RESISTANCE: polyethylene/ethylenevinylalcohol. styrene-butadiene rubber. viton. GIVE LESS RESISTANCE: chloroprene rubber. chlorinated polyethylene. natural rubber. nitrile rubber/PVC. GIVE POOR RESISTANCE: leather. neoprene. nitrile rubber. polyethylene. PVA.

PVC. polyurethane
Hand protection:

Protective gloves against chemicals (EN 374)
Eye protection:

Safety glasses
Skin and body protection:
02/18/2020
EN (English US)
4/ 10
Exhibit 2
804

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Head/neck protection. Protective clothing
Respiratory protection:

Full face mask with filter type AX at conc. in air > exposure limit. High vapour/gas concentration: self-contained respirator Personal protective equipment symbol(s):

Physical state
Appearance
Color
Odor
Odor threshold
pH
Melting point
Freezing point
Boiling point
Critical temperature
Critical pressure
Flash point
Relative evaporation rate (butyl acetate=1)
Relative evaporation rate (ether=1)
Flammability (solid, gas)
Vapor pressure
Vapor pressure at 50 °C
Relative vapor density at 20 °C
Relative density
Relative density of saturated gas/air mixture
Specific gravity / density
Molecular mass
Solubility
Log Pow
Auto -ignition temperature
Decomposition temperature
Viscosity, kinematic
Viscosity, dynamic
Explosion limits
Explosive properties
Oxidizing properties
Minimum ignition energy
Saturation concentration
VOC content
Other properties
02/18/2020
Liquid
Liquid.

Colourless
Characteristic odour Mild odour Pleasant odour Alcohol odour Commercial/unpurified substance: irritating/pungent odour
No data available
No data available
-97.8 °C
No data available

64.7 °C (1013 hPa)
240 °C
79547 hPa

9.7 °C (Closed cup, 1013 hPa, EU Method A.9: Flash -Point)

4.1 6.3
No data available
128 hPa (20 °C)
552 hPa

1.1 0.79 — 0.80 (20 °C)
1 790 — 800 kg/m3 (20 °C)

32.04 g/mol
Soluble in water. Soluble in ethanol. Soluble in ether. Soluble in acetone. Soluble in chloroform.

Water: 100 g/100m1 (20 °C)
Ethanol: complete
Ether: complete
Acetone: complete
-0.77 (Experimental value)
455 °C (1013 hPa, DIN 51794: Self -ignition temperature) No data available
No data available

0.544 — 0.59 mPa-s (25 °C)

5.5-36.5voI%
No data available
No data available

0.14 mJ
166 g/m3
100 %
Clear. Hygroscopic. Volatile. Neutral reaction.

EN (English US)
5/10
Exhibit 2
805

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Violent to explosive reaction with (some) metal powders and with (strong) oxidizers. Violent exothermic reaction with (some) acids and with (some) halogens compounds.

Hygroscopic.

No additional information available
Direct sunlight. High temperature. Incompatible materials. Open flame. Sparks. Overheating.

Strong oxidizers. Strong bases. Strong acids. Peroxides. Acid anhydrides. Acid chlorides.

Carbon dioxide. Carbon monoxide.

Acute toxicity (oral)
Acute toxicity (dermal)
Acute toxicity (inhalation)
Toxic if swallowed.

Toxic in contact with skin.

Toxic if inhaled.

LD50 oral rat
1187 — 2769 mg/kg body weight (BASF test, Rat, Male / female, Weight of evidence, Aqueous solution, Oral, 7 day(s))
LD50 dermal rabbit
17100 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal) LC50 inhalation rat (mg/1)
128.2 mg/I air (BASF test, 4 h, Rat, Male / female, Experimental value, Inhalation (vapours)) ATE US (oral)
100 mg/kg body weight
ATE US (dermal)
300 mg/kg body weight
ATE US (gases)
700 ppmV/4h
ATE US (vapors)
3 mg/l/4h
ATE US (dust, mist)

0.5 mg/l/4h
Skin corrosion/irritation
Serious eye damage/irritation
Respiratory or skin sensitization
Germ cell mutagenicity
Carcinogenicity
Reproductive toxicity
STOT-single exposure
STOT-repeated exposure
Aspiration hazard
Viscosity, kinematic
Potential Adverse human health effects and
symptoms
Symptoms/effects after inhalation
Symptoms/effects after skin contact
Symptoms/effects after eye contact
Symptoms/effects after ingestion
Not classified
Not classified
Not classified
Not classified
Not classified
Not classified
Causes damage to organs (liver, kidneys, central nervous system, optic nerve) (Dermal, oral).

Not classified
Not classified
No data available
Toxic in contact with skin. Toxic if swallowed. Toxic if inhaled.

EXPOSURE TO HIGH CONCENTRATIONS: Coughing. Symptoms similar to those listed under ingestion.

Symptoms similar to those listed under ingestion.

Redness of the eye tissue. Lacrimation.

Mental confusion. Drunkenness. Coordination disorders. Disturbed motor response.

Disturbances of consciousness. Visual disturbances. Blindness. Respiratory difficulties.

Cramps/uncontrolled muscular contractions.
02/18/2020
Exhibit 2
EN (English US)
:1.
6/ 10

Ecology - general
Not classified as dangerous for the environment according to the criteria of Regulation (EC) No 1272/2008.

Ecology - air
Not included in the list of substances which may contribute to the greenhouse effect (IPCC).

Not included in the list of fluorinated greenhouse gases (Regulation (EU) No 517/2014). Not classified as dangerous for the ozone layer (Regulation (EC) No 1005/2009).

Ecology - water
Not harmful to crustacea. Not harmful to fishes. Groundwater pollutant. Inhibition of activated sludge. Nitrification of activated sludge is inhibited. Not harmful to algae. Not harmful to bacteria.

LC50 fish 1
15400 mg/I (EPA 660/3 - 75/009, 96 h, Lepomis macrochirus, Flow -through system, Fresh water, Experimental value, Lethal)
EC50 Daphnia 1
18260 mg/I (OECD 202: Daphnia sp. Acute Immobilisation Test, 96 h, Daphnia magna, Semi - static system, Fresh water, Experimental value, Locomotor effect) ErC50 (algae)
22000 mg/I (OECD 201: Alga, Growth Inhibition Test, 96 h, Pseudokirchneriella subcapitata, Static system, Fresh water, Experimental value)
Persistence and degradability
Readily biodegradable in the soil. Readily biodegradable in water.

Biochemical oxygen demand (BOD)

0.6 — 1.12 g 02/g substance
Chemical oxygen demand (COD)

1.42 g 02/g substance
ThOD

1.5 g Oz/g substance
No additional information available
Waste disposal recommendations Do not discharge into drains or the environment. Remove waste in accordance with local and/or national regulations. Hazardous waste shall not be mixed together with other waste. Different types of hazardous waste shall not be mixed together if this may entail a risk of pollution or create problems for the further management of the waste. Hazardous waste shall be managed responsibly. All entities that store, transport or handle hazardous waste shall take the necessary measures to prevent risks of pollution or damage to people or animals. Recycle by distillation. Incinerate under surveillance with energy recovery. Obtain the consent of pollution control authorities before discharging to wastewater treatment plants.

Additional information Hazardous waste according to Directive 2008/98/EC, as amended by Regulation (EU) No 1357/2014 and Regulation (EU) No 2017/997.
02/18/2020
Exhibit 2
EN (English US)
807
7/ 10

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Department of Transportation (DOT)
In accordance with DOT
Transport document description
UN-No.(DOT)
Proper Shipping Name (DOT)
Transport hazard class(es) (DOT)
Packing group (DOT)
Hazard labels (DOT)
DOT Packaging Non Bulk (49 CFR 173.xxx)
DOT Packaging Bulk (49 CFR 173.xxx)
DOT Symbols
DOT Special Provisions (49 CFR 172.102)
DOT Packaging Exceptions (49 CFR 173.xxx)
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
UN1230 Methanol, 3, II
UN1230
Methanol
3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 202
242
D - Proper shipping name for domestic use only, or to and from Canada 1132 -Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 311-12); Composite (31 HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110 kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.

T7 - 4 178.274(d)(2) Normal ............. 178.275(d)(3) TP2 - a. The maximum degree of filling must not exceed the degree of filling determined by the following: (image) Where: tr is the maximum mean bulk temperature during transport, tf is the temperature in degrees celsius of the liquid during filling, and a is the mean coefficient of cubical expansion of the liquid between the mean temperature of the liquid during filling (tf) and the maximum mean bulk temperature during transportation (tr) both in degrees celsius. b. For liquids transported under ambient conditions may be calculated using the formula: (image) Where: d15 and d50 are the densities (in units of mass per unit volume) of the liquid at 15 C (59 F) and 50 C (122 F), respectively.
150
1L
60 L
DOT Vessel Stowage Location B - (i) The material may be stowed "on deck" or "under deck" on a cargo vessel and on a passenger vessel carrying a number of passengers limited to not more than the larger of 25 passengers, or one passenger per each 3 m of overall vessel length; and (ii) "On deck only" on passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this section is exceeded.

DOT Vessel Stowage Other 40 - Stow "clear of living quarters" Other information No supplementary information available.

Transportation of Dangerous Goods
Transport document description
UN -No. (TDG)
Proper Shipping Name (Transportation of
Dangerous Goods)
TDG Primary Hazard Classes
Packing group
TDG Subsidiary Classes
TDG Special Provisions
Explosive Limit and Limited Quantity Index
Passenger Carrying Road Vehicle or Passenger
Carrying Railway Vehicle Index
Transport by sea
Transport document description (IMDG)
02/18/2020
Exhibit 2
UN1230 METHANOL, 3 (6.1), II
UN1230

METHANOL
3 - Class 3 - Flammable Liquids
II - Medium Danger

6.1 43 - Despite section 2.1 of Part 2, Classification, these dangerous goods are assigned to this classification based on human experience.
1L
1L
UN 1230 methanol, 3 (6.1), II
EN (English US)
8/10
:1:

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations UN -No. (IMDG)
Proper Shipping Name (IMDG)
Class (IMDG)
Packing group (IMDG)
Subsidiary risks (IMDG)
EmS-No. (1)
EmS-No. (2)
MFAG-No
Air transport
Transport document description (IATA)
UN -No. (IATA)
Proper Shipping Name (IATA)
Class (IATA)
Packing group (IATA)
1230
methanol
3 - Flammable liquids
II - substances presenting medium danger

6.1 - Toxic substances
F-E
S-D
19 UN 1230 Methanol, 3 (6.1), II
1230
Methanol
3 - Flammable Liquids
II - Medium Danger
Listed on the Canadian DSL (Domestic Substances
EU-Regulations
No additional information available
National regulations
No additional information available
U.S. - California -
Proposition 65 -
Carcinogens
No
List
U.S. - California -
Proposition 65 -
Developmental
Yes
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
No
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive
No
Toxicity - Male
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Revision date
03/08/2019
02/18/2020
Exhibit 2
EN (English US)
'; We
9/ 10

Methanol
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Full text of H-phrases: see section 16:

H225
Highly flammable liquid and vapour
H301
Toxic if swallowed
H311
Toxic in contact with skin
H331
Toxic if inhaled
H370
Causes damage to organs
NFPA health hazard 2 - Materials that, under emergency conditions, can cause temporary incapacitation or residual injury.

NFPA fire hazard 3 - Liquids and solids (including finely divided suspended solids) that can be ignited under almost all ambient
temperature conditions.

NFPA reactivity 0 - Material that in themselves are normally stable, even under fire conditions.

Hazard Rating
Health 2 Moderate Hazard - Temporary or minor injury may occur Flammability 3 Serious Hazard - Materials capable of ignition under almost all normal temperature conditions. Includes flammable liquids with flash points below 73 F and boiling points above 100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC) Physical 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self -react. Non -Explosives.

Personal protection H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator SIDS US ValTech
Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 02/18/2020
Exhibit 2
EN (English US)
810
10/10

Safety Data Sheet

Page 1 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
1 Identification of the substance/mixture and of the supplier

1.1 GHS Product identifier
Trade Name: Liquinox°
Product number: 1201, 1201-1, 1205, 1215, 1230, 1232, 1232-1, 1255

1.2 Application of the substance / the mixture: Cleaning material/Detergent

1.2.1 Recommended dilution ratio: 1 - 2% in water

1.3 Details of the supplier of the Safety Data Sheet
Manufacturer: Supplier:

Alconox Inc.
30 Glenn St
White Plains, NY 10603
(914) 948-4040
Emergency telephone number:

ChemTel Inc
North America: 1-888-255-3924
International: +1 813-248-0573
2 Hazards identification

2.1 Classification of the substance or mixture:

Revision : 11 May 2020
In compliance with EC regulation No. 1272, 29CFR1910/1200 and GHS requirements.

Hazard -determining components of labeling:

Alcohol ethoxylate
Sodium alkylbenzene sulfonate
Sodium xylenesul phonate
Lauramine oxide

2.2 Label elements:

Eye damage, category 1.

Skin irritation, category 2.

Product at recommended dilution:

Eye irritation, category 2B
Hazard pictograms:

Signal word: Danger
Hazard statements:

H315 Causes skin irritation.

H318 Causes serious eye damage.

Precautionary statements:

P264 Wash skin thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

Exhibit 2 F7303 I SDS12E.0 I Created by Alconox In8.1 1 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 2 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
Revision : 11 May 2020
P302+P352 If on skin: Wash with soap and water.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P332+P313 If skin irritation occurs: Get medical advice/attention.

P501 Dispose of contents and container as instructed in Section 13.

Hazardous Elements at Use Dilution:

Hazard pictograms:

Signal word: Warning
Hazard statements:

H320 Causes eye irritation
Precautionary statements:

P302+P352 If on skin: Wash with soap and water.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P501 Dispose of contents and container as instructed in Section 13 Additional information: None.

Hazard description
Hazards Not Otherwise Classified (HNOC): May cause surfaces to become slippery. Use caution in areas of foot traffic if on floors.

Information concerning particular hazards for humans and environment:

The product has to be labelled due to the calculation procedure of the "General Classification guideline for preparations of the EU" in the latest valid version.

Classification system:

The classification is according to EC regulation No. 1272, 29CFR1910/1200 and GHS, and extended by company and literature data. The classification is in accordance with the latest editions of international substances lists and is supplemented by information from technical literature and by information provided by the company.
3 Composition/information on ingredients

3.1 Chemical characterization: None

3.2 Description: None

3.3 Hazardous components (percentages by weight)
Identification
Chemical Name
Classification
Wt. %
CAS number:

Sodium Alkylbenzene Sulfonate
Acute Tox. 4; H303
10-25
68081-81-2 or
Skin Irrit. 2 ; H315
68411-30-3
Eye Dam. 1; H318
CAS number:

Sodium Xylenesul phonate
Eye Irrit. 2;H319

2.5-10
1300-72-7
CAS number:

Alcohol Ethoxylate
Skin Irrit. 2; H315

2.5-10
84133-50-6
Eye Dam. 1; H318
CAS number:

Lauramine oxide
Skin Irrit. 2 ; H315
1-2
1643-20-5
Eye Dam. 1; H318
Exhibit 2 F7303 I SDS12E.0 I Created by Alconox In8.12 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 3 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
Revision : 11 May 2020
At use dilution:

CAS number:

Sodium Alkylbenzene Sulfonate
Eye Irr. 2B, H319

0.1-0.25
68081-81-2 or
68411-30-3

3.4 Additional Information: None.
4 First aid measures

4.1 Description of first aid measures
General information: None.

After inhalation:

Maintain an unobstructed airway.

Loosen clothing as necessary and position individual in a comfortable position.

After skin contact:

Wash affected area with soap and water.

Seek medical attention if symptoms develop or persist.

After eye contact:

Rinse/flush exposed eye(s) gently using water for 15-20 minutes.

Remove contact lens(es) if able to do so during rinsing.

Seek medical attention if irritation persists or if concerned.

After swallowing:

Rinse mouth thoroughly.

Seek medical attention if irritation, discomfort, or vomiting persists.

4.2 Most important symptoms and effects, both acute and delayed None

4.3 Indication of any immediate medical attention and special treatment needed:

No additional information.

First aid measure at recommended dilution:

General information: None.

After inhalation:

Maintain an unobstructed airway.

Loosen clothing as necessary and position individual in a comfortable position.

After skin contact:

Wash affected area with soap and water.

After eye contact:

Rinse/flush exposed eye(s) gently using water for 15-20 minutes.

Remove contact lens(es) if able to do so during rinsing.

After swallowing:

Rinse mouth thoroughly. Seek medical attention if irritation, discomfort, or vomiting develops.

Exhibit 2 F7303 I SDS12E.0 I Created by Alconox Ing.1 3 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 4 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
5 Firefighting measures
Revision : 11 May 2020

5.1 Extinguishing media
Suitable extinguishing agents:

Use appropriate fire suppression agents for adjacent combustible materials or sources of ignition.

For safety reasons unsuitable extinguishing agents: None

5.2 Special hazards arising from the substance or mixture:

Thermal decomposition can lead to release of irritating gases and vapors.

5.3 Advice for firefighters
Protective equipment:

Wear protective eye wear, gloves and clothing.

Refer to Section 8.

5.4 Additional information:

Avoid inhaling gases, fumes, dust, mist, vapor and aerosols.

Avoid contact with skin, eyes and clothing.
6 Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation.

Ensure air handling systems are operational.

6.2 Environmental precautions:

Should not be released into the environment.

Prevent from reaching drains, sewer or waterway.

6.3 Methods and material for containment and cleaning up:

Wear protective eye wear, gloves and clothing.

6.4 Reference to other sections: None
7 Handling and storage

7.1 Precautions for safe handling:

Avoid breathing mistorvapor.

Do not eat, drink, smoke or use personal products when handling chemical substances.

7.2 Conditions for safe storage, including any incompatibilities Store in a cool, well -ventilated area.

7.3 Specific end use(s):

No additional information.
8 Exposure controls/personal protection

8.1 (D
Control parameters :
25322-68-3, Poly(ethylene oxide), Al HA TWA 10 mg/m3 ( www.alconox.com

Safety Data Sheet

Page 5 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®

8.2 Exposure controls
Revision : 11 May 2020
Appropriate engineering controls:

Emergency eye wash fountains and safety showers should be available in the immediate vicinity of use or handling.

Respiratory protection:

Not needed under normal conditions.

Protection of skin:

Select glove material impermeable and resistant to the substance.

Eye protection:

Safety goggles or glasses, or appropriate eye protection.

General hygienic measures:

Wash hands before breaks and at the end ofwork.

Avoid contact with skin, eyes and clothing.

Exposure Control and Personal Protective Equipment at recommended dilution:

Under normal use and operational conditions, no special personal protective equipment or engineering controls will be necessary. Handle with care.
9 Physical and chemical properties
Not determined or not
Appearance
Pale yellow liquid
Explosion limit lower:
available.
(physical state,
Explosion limit
Not determined or not
color):
upper:
available.

Odor:

Not determined or not
Vapor pressure at 20OC:

Not determined or not
available.
available.

Odor threshold:

Not determined or not
Vapor density:

Not determined or not
available.
available.
pH -value:

8.5 (as is)
Relative density:

Not determined or not
available.

Melting/Freezing point:

Not determined or not
Solubilities:

Not determined or not
available.
available.

Boiling
Not determined or not
Partition coefficient (n-
Not determined or not
point/Boiling range:
available.
octanol/water):
available.

Flash point (closed
Not determined or not
Auto/Self-ignition
Not determined or not
cup):
available.
temperature:
available.

Evaporation rate:

Not determined or not
Decomposition
Not determined or not
available.
temperature:
available.
a. Kinematic: Not
Flammability (solid,
Not flammable
Viscosity:
determined or not available.
gaseous):
b. Dynamic: Not determined
or not available.

Density at 20OC:

1.08 g/mL
Exhibit 2 F7303 I SDS12E.0 I Created by Alconox In8.15 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 6 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
10 Stability and reactivity

10.1 Reactivity: Not determined or not available.

10.2 Chemical stability: Not determined or not available.

10.3 Possibility hazardous reactions: Not determined or not available.

10.4 Conditions to avoid: Not determined or not available.

10.5 Incompatible materials: Not determined or not available.

10.6 Hazardous decomposition products: Not determined or not available.

I I Toxicological information

11.1 Information on toxicological effects:

Acute Toxicity:

Oral:

LD50 >5000 mg per kg (Rat, Oral) - product.

Chronic Toxicity: No additional information.

Skin corrosion/irritation (raw materials):

Alcohol Ethoxylate: May cause mild to moderate skin irritation.

Sodium Alkylbenzene Sulfonate: Causes skin irritation.

Lauramine oxide: Causes skin irritation.

Serious eye damage/irritation (raw materials):

Revision : 11 May 2020
Sodium Alkylbenzene Sulfonate: Causes serious eye damage.

Alcohol Ethoxylate: Causes moderate to severe eye irritation and conjunctivitis.

Sodium xylenesulphonate: irritating to eyes.

Lauramine oxide: Causes serious eye damage.

Product information at recommended dilution:

Eye irritation may occur upon direct contact with eyes. No specific hazards for skin contact, inhalation, or chronic exposure are expected within normal use parameters.

Respiratory or skin sensitization: No additional information.

Carcinogenicity: No additional information.

IARC (International Agency for Research on Cancer): None of the ingredients are listed.

NTP (National Toxicology Program): None of the ingredients are listed.

Germ cell mutagenicity: No additional information.

Reproductive toxicity: No additional information.

STOT-single and repeated exposure: No additional information.

Additional toxicological information: No additional information.

Exhibit 2 F7303 I SDS12E.0 I Created by Alconox Ing.16 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 7 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
12 Ecological information
Revision : 11 May 2020

12.1 Toxicity:

Sodium Alkylbenzene Sulfonate: Fish, LC50 1.67 mg/I, 96 hours.

Sodium Alkylbenzene Sulfonate: Aquatic invertebrates, EC50 Daphnia 2.9 mg/I, 48 hours. Sodium Alkylbenzene Sulfonate: Aquatic Plants, EC50 Algae 29 mg/I, 96 hours.

Lauramine oxide: Fish, LC50 24.3 mg/I, 96h [Killifish (Cyprinodontidae)] Lauramine oxide: Aquatic invertebrates, (LC50): 3.6 mg/I 96 hours [Daphnia (Daphnia)].

Lauramine oxide: Aquatic plants, EC50 Algae 0.31 mg/I 72 hours [Algae] Alcohol Ethoxylate: Aquatic invertebrates, (LC50): 4.01 mg/I 48 hours [Daphnia (daphnia)].

12.2 Persistence and degradability: No additional information.

12.3 Bioaccumulative potential: No additional information.

12.4 Mobility in soil: No additional information.

General notes: No additional information.

12.5 Results of PBT and vPvB assessment:

PBT: No additional information.
vPvB: No additional information.

12.6 Other adverse effects: No additional information.
13 Disposal considerations

13.1 Waste treatment methods (consult local, regional and national authorities for proper disposal) Relevant Information:

It is the responsibility of the waste generator to properly characterize all waste materials according to applicable regulatory entities. (US 40CFR262.11).
14 Transport information

14.1 UN Number: None

ADR, ADN, DOT, IMDG, IATA

14.2 UN Proper shipping name: None

ADR, ADN, DOT, IMDG, IATA

14.3 Transport hazard classes:

ADR, ADN, DOT, IMDG, IATA
Class: None
Label: None
LTD. QTY: None
US DOT
Limited Quantity Exception: None
Exhibit 2 F7303 I SDS12E.0 I Created by Alconox Ing.1 7 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 8 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
Revision : 11 May 2020
Bulk:

Non Bulk:

RQ (if applicable): None
RQ (if applicable): None
Proper shipping Name:

Proper shipping Name:

None Hazard Class: None
None Hazard Class: None
Packing Group: None
Packing Group: None
Marine Pollutant (if applicable): No
Marine Pollutant (if applicable): No
additional information.
additional information.

Comments: None
Comments: None

14.4 Packing group:

None

ADR, ADN, DOT, IMDG, IATA

14.5 Environmental hazards:

None

14.6 Special precautions foruser:

None
Danger code (Kemler):

None
EMS number:

None
Segregation groups:

None

14.7 Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code: Not applicable.

14.8 Transport/Additional information:

Transport category:

None
Tunnel restriction code:

None
UN "Model Regulation":

None
15 Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture.

North American
SARA
Section 313 (specific toxic chemical listings): None of the ingredients are listed.

Section 302 (extremely hazardous substances): None of the ingredients arelisted.

CERCLA (Comprehensive Environmental Response, Clean up and Liability Act) Reportable Spill Quantity: None of the ingredients are listed.

TSCA (Toxic Substances Control Act):

Inventory: All ingredients are listed as active.

Rules and Orders: Not applicable.

Proposition 65 (California):

Chemicals known to cause cancer: None of the ingredients are listed.

Chemicals known to cause reproductive toxicity for females: None of the ingredients are listed.

Chemicals known to cause reproductive toxicity for males: None of the ingredients are listed.

Chemicals known to cause developmental toxicity: None of the ingredients are listed.

Canadian
Canadian Domestic Substances List (DSL):

All ingredients are listed.

Exhibit 2 F7303 I SDS12E.0 I Created by Alconox Ing.1 8 (914) 948-4040 1 www.alconox.com

Safety Data Sheet

Page 9 of 9 ends

Effective date: 11 May 2020
Trade Name: Liquinox®
Asia Pacific
stralia
Revision : 11 May 2020
Australian Inventory of Chemical Substances (AILS): All ingredients are listed.

China
Inventory of Existing Chemical Substances in China (IECSC): All ingredients are listed.

Japan
Inventory of Existing and New Chemical Substances (ENCS): All ingredients are listed.

Korea
Existing Chemicals List (ECL): All ingredients are listed.

New Zealand
New Zealand Inventory of Chemicals (NZOIC): All ingredients are listed.

Philippines
Philippine Inventory of Chemicals and Chemical Substances (PICCS): All ingredients are listed.

Taiwan
EU
Taiwan Chemical Substance Inventory (TSCI): All ingredients are listed.

REACH Article 57 (SVHC): None of the ingredients are listed.

Germany MAK: Not classified.
16 Other information
Abbreviations and Acronyms: None
Summary of Phrases
Hazard statements:

H315 Causes skin irritation.

H318 Causes serious eye damage.

Precautionary statements:

P264 Wash skin thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352 If on skin: Wash with soap and water.

P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P332+P313 If skin irritation occurs: Get medical advice/attention.

P501 Dispose of contents and container as instructed in Section

13. Manufacturer Statement:

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

N FPA: 1-0-0
H M I S: 1-0-0
At recommended dilution:

N FPA: 1-0-0
HMIS: 1-0-0
Exhibit 2 F7303 I SDS12E.0 I Created by Alconox Ing.19 (914) 948-4040 1 www.alconox.com

EXHIBIT "D"

CERTIFICATE OF INSURANCE
Exhibit 2 820

ACCORD® CERTIFICATE OF LIABILITY INSURANCE

DATE(MM/DD/YYYY)
10/25/2023
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS

CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER.

IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

PRODUCER
Bowen, Miclette & Britt Insurance Agency LLC
2800 North Loop West, Suite 1100
Houston TX 77092

CONTACT
NAME: Kaltlln Walters
PHONE 713-880-7100 FAX
A/C No Ext: N°: 713-880-7166
ML
ADDRESS: [email protected]

INSURER(S) AFFORDING COVERAGE
NAIC #
INSURERA: Colony Insurance Co.
39993

INSURED GSIENVIRON
INSURERB: Hartford Accident and Indemnity Co
22357
GSI Environmental Inc.
2211 Norfolk, Suite 1000
INsuRERc: Texas Mutual Insurance Company
22945
INSURERD: Argonaut Insurance Co
19801
Houston TX 77098-4054
INSURER E :

INSURER F :

COVERAGES CERTIFICATE NUMBER: 634331880 REVISION NUMBER:

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS

CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

INSR
LTR

TYPE OF INSURANCE
ADDL
INSD
SUBR
WVD

POLICY NUMBER

POLICY EFF

MMIDD/YYY

POLICY EXP

MMIDD/YYY
LIMITS
A
X

COMMERCIAL GENERAL LIABILITY
Y
Y
PACE4281682
12/3/2022
12/3/2023

EACH OCCURRENCE
$ 1,000,000
CLAIMS -MADE � OCCUR

PREMISES DAMAGE TO
PREMISES Ea occurrence)
ccurrence
$ 100,000
MED EXP (Any one person)
$ 10,000

PERSONAL & ADV INJURY
$ 1,000,000
GEN'L
AGGREGATE LIMIT APPLIES PER:

GENERAL AGGREGATE
$ 2,000,000
POLICY jECT LOC

PRODUCTS - COMP/OP AGG
$ 2,000,000
$
OTHER:

AUTOMOBILE

LIABILITY
Y
Y
61UECDG6360
12/3/2022
12/3/2023

COMBINED SINGLE LIMIT
Ea accident
$ 1 000 000
X
BODILY INJURY (Per person)
$

ANY AUTO

ALL OWNED SCHEDULED

AUTOS AUTOS
BODILY INJURY (Per accident)
$

PROPERTY DAMAGE
Per accident
$

NON -OWNED

HIRED AUTOS AUTOS
A

UMBRELLA LAB
X
OCCUR
Y
Y
EXC4281683
12/3/2022
12/3/2023

EACH OCCURRENCE
$ 5,000,000
X

AGGREGATE
$ 5,000,000

EXCESS LIAB

CLAIMS -MADE
DED RETENTION $
$
C
D

WORKERS COMPENSATION

AND EMPLOYERS' LIABILITY Y / N
Y
0001319099
92-893-835984-4
12/3/2022
12/3/2022
12/3/2023
12/3/2023
)( PER OTH-

STATUTE ER

ANY PROPRIETOR/PARTNER/EXECUTIVE
OFFICER/MEMBER EXCLUDED?
N/A
E.L. EACH ACCIDENT
$ 1,000,000
E.L. DISEASE - EA EMPLOYEE
$ 1,000,000
(Mandatory in NH)
If yes, describe under
DESCRIPTION OF OPERATIONS below
E.L. DISEASE - POLICY LIMIT
$ 1,000,000
A
Contractors Pollution Liability
PACE4281682
12/3/2022
12/3/2023
Each Claim 1,000,000
Transportation Poll Liability
Aggregate 1,000,000
Professional Liability
DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) Contractors Pollution Liability, Transportation Liability and Professional Liability coverages share the General Liability aggregate limit of $2,000,000.

Policy Number: PACE4281682 Effective Date: 12/3/2022 12/3/2023 Colony Insurance Co.
2nd Layer Excess: Homeland Insurance Company of New York Effective Date: 12/3/2022-12/3/2023; Policy Number: 7930123040000 Each Claim: $4,000,000/Aggregate: $4,000,000
See Attached...

CERTIFICATE HOLDER CANCELLATION

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE

THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN Department of Toxic Substances Control
ACCORDANCE WITH THE POLICY PROVISIONS.
1001 1 Street

AUTHORIZED REPRESENTATIVE
P.O. Box 806
Sacramento CA 95812-0806°
@ 1988-2014 ACORD CORPORATION. All rights reserved.

Pn@Wt2_5 (2014/01) The ACORD name and logo ;821'egistered marks of ACORD

AGENCY CUSTOMER ID: GSIENVIRON
LOC #:

ADDITIONAL REMARKS SCHEDULE
AGENCY
Bowen, Miclette & Britt Insurance Agency LLC

POLICY NUMBER

CARRIER

ADDITIONAL REMARKS

NAIC CODE

NAMED INSURED
GSI Environmental Inc.
2211 Norfolk, Suite 1000
Houston TX 77098-4054
EFFECTIVE DATE:

THIS ADDITIONAL REMARKS FORM IS A SCHEDULE TO ACORD FORM, FORM NUMBER: 25 FORM TITLE: CERTIFICATE OF LIABILITY INSURANCE

Page 1 of 1 ends

Cyber Liability: Travelers Casualty Sur Co of America
Effective Date: 12/3/2022-12/2/2023; Policy Number: 106995945 Aggregate: $1,000,000; See attached dec
The following policy provisions and/or endorsements form part of the policies of insurance represented by this certificate of insurance. The terms contained in the policies and/or endorsements supersede the representations made herein. Electronic copies of the policy provisions and/or endorsements listed below are available by emailing: Contact Person as shown above.

When required by written contract, those parties listed in said contract, including the certificate holder, are added as an additional insured with respect to the General Liability, Auto Liability, Excess Liability, and 2nd Layer Excess Liability as afforded by the policy and/or endorsements.

When required by written contract, waiver of subrogation, with respect to the General Liability, Auto Liability, Workers Compensation, Excess Liability and 2nd Layer Excess Liability is granted to those parties listed in said contract, including the certificate holder.

The General Liability, Auto Liability, Excess Liability and 2nd Layer Excess Liability certified herein are primary and non-contributory to other insurance available, but only to the extent required by written contract.

RE: 19-T4793
holder includes: The City of Bell Gardens, its officers, officials, employees, and agents ACORD 101 (2008/01)
Exhibit 2
© 2008 ACORD CORPORATION. All rights reserved.

The ACORD name and logo arg2gistered marks of ACORD

Policy Number: 106995945
Effective Date: 12/3/2022-12/3/2023 Cybe,rRisk Declarations Claims -Made: The Liability Insuring Agreements are provided on a Claims -Made basis, and cover only Claims first made during the Policy Period, or any applicable extended reporting period. Please read the Policy.

Defense Within Limits: The Limit available to pay settlements or judgments will be reduced, and may be completely exhausted, by Defense Costs, and any retention will be applied against Defense Costs.

A limit left blank for a coverage means that such coverage is not included. An entry for any other provision left blank means that such provision does not apply.

The Insurer has the duty to defend Claims.

CyberRisk Aggregate Limit: $1,000,000
Liability
Limit
Retention
Privacy and Security
$1,000,000
$10,000
Payment Card Costs
$1,000,000
Subject to Privacy and Security Retention
Media
$1,000,000
$10,000
Regulatory Proceedings
$1,000,000
$10,000
Breach Response
Limit
Retention
Privacy Breach Notification
$1,000,000
$10,000
Computer and Legal Experts
$1,000,000
$10,000
Betterment
$100,000
Cyber Extortion
$1,000,000
$10,000
Data Restoration
$1,000,000
$10,000
Public Relations
$1,000,000
$10,000
Cyber Crime
Limit
Retention
Computer Fraud
$1,000,000
$10,000
Funds Transfer Fraud
$1,000,000
$10,000
Social Engineering Fraud
$100,000
$10,000
Telecom Fraud
$100,000
$10,000
CYO-15001 Rev. 06-20
9) 2020 The Travelers Indemnity Company. All rights reserved.

Exhibit 2
823
Page I of 2

Policy Number: 106995945
Effective Date: 12/3/2022-12/312023
Business Loss
Limit
Business Interruption
$1,000,000
Dependent Business
Interruption
$100,000
Dependent Business
Interruption -
$100,000
System Failure
Dependent Business
Interruption -
$100,000
Outsource Provider
Dependent Business
Interruption -
$100,000
Outsource Provider -System
Failure
Reputation Harm
$250,000
System Failure
$1,000,000
Additional First Party Provisions
Accounting Costs Limit:
$25,000
Betterment Coparticipation:
50%
Period Of Restoration:
180 days
Period Of Indemnity:
30 days
Wait Period:
10 hours
Knowledge Date: December 03, 2018
P&P Date; December 03, 2018
Retro Date: N/A
Extended Reporting Period
Months
12 Percentage of Annualized Premium
75%
CYO-15001 Rev. 06-20
9) 2020 The Travelers Indemnity Company. All rights reserved.

Retention

Page 2 of 2 ends

Exhibit 2 824

Policy Number: PACE4281682
Effective Date: 12/312022-12/312023
(2), Property damage or environmental damage to property� (a) Owned, occupied or used by; or
(b) Rented to, in the care, custody or control of, or over which physical control is being exercised for any purpose by you, any of your employees, volunteer workers, any partner or member (if you are a partnership or joint venture), or any member (if you are a limited liability company).
b. Any person (other than your employee or volunteer worker), or any organization while acting as your real estate manager.

C. Any person or organization having proper temporary custody of your property if you die, but only:
(1), With respect to liability arising out of the maintenance or use of that property; and
(2) Until your legal representative has been appointed. dl. Your legal representative if you die, but only with respect to duties as such. That representative will have all your rights and duties under this Policy.

3. Any subsidiary, associated, affiliated or allied company or corporation, including subsidiaries thereof, of which you have more than 50% ownership interest as of the inception date is a Named Insured; however, such entities shall cease to be a Named Insured if you cease to maintain more than a 501% ownership interest.

4. Any organization you newly acquire or form, other than a partnership, joint venture or limited liability company, and over which you maintain ownership or majority interest, will qualify as a Named Insured if there is no other similar insurance available to that organization. However:
a. Coverage under this provision is afforded only until the 180th day after you acquire or form the organization or the end of the policy period, whichever is earlier;
b. Coverage under this Policy does not apply to any bodily injury, property damage, environmental damage or pollution condition that took place, or an offense or wro,ngfuil act committed, before you acquired or formed the organization.

Any person or organization with whom you agree to include as an insured pursuant to a written contract, written agreement or permit is an insured, but: (i) only with respect to bodily injury, property damage, personal and advertising injury, environmental damage or clean-up costs caused, in whole or in part, by your acts or omissions or the acts or omissions of those acting on your behalf and arising out of your operations, your work, equipment or premiises leased, rented or owned by you, or your products which are distributed or sold in the regular course of a vendor's business; (ii) only for the lesser of the applicable limits of liability set forth in section, XXI. LIMITS OF LIABILITY AND DEDUCTIBLE or the minimum limits of liability required by such written contract; (iii) the insurance afforded only applies to the extent permitted by law; (iv) the insurance afforded will not be broader than that which you are required by the contract or agreement to provide for such insured. However:

F4VA 0 .TTaJT§JffJJ1W
Exhibit 2 825

Policy Number: PACE4281682
Effective Date: 12/3/2022-12/312023
a. A vendor is not an insured as respects bodily injury, property damage, environmental damage or clean-up costs arising out of:
(1) Damages the vendor is obligated to pay by reason of the assumption of liability in a contract or agreement except for any damages that the vendor would have been obligated to pay in the absence of the contract or agreement;
(2) Any express warranty unauthorized by you;
(3) Any physical or chemical change in the product made intentionally by the vendor;
(4) Repackaging, except when unpacked solely for the purpose of inspection, demonstration, testing, or the substitution of parts under instructions from you, and then repackaged in the original container;
(5) Any failure to make inspections, adjustments, tests or servicing as the vendor has agreed to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products;
(6,) Demonstration, installation, servicingor repair operations, except such, operations performed at the vendor's location in connection with the sale of the product;
(7) Products which, after distribution or sale by you, have been labeled or relabeled or used as a container, part or ingredient of any other thing or substance by or for the vendor; or
(8) The sole negligence of the vendor for its, own acts or omissions or those of its employees or anyone else acting on its behalf. However, this subparagraph does not apply to:
(a) the exceptions contained in subparagraphs (4) or (6) above; or (b) such inspections, adjustments, tests or servicing as the vendor has agreed to make or normally undertakes to make in the usual course of business, in connection with the distribution or sale of the products.

6. A manager or lessor of premises, a lessor of leased equipment, or a mortgagee, assignee, or receiver is not an insured as respects bodily injury, property damage, environmental damage, personal and advertising injury or clean-up costs:

Arising out of any occurrence, offense, pollution condition, or wrongful act that takes place after the equipment lease expires or you cease to be a tenant; or
b. Arising out of structural alterations, new construction or demolition operations performed by or on behalf of the manager or lesser of premises, or mortgagee, assignee, or receiver.

F4VA 0 .TTaJT§JffJJIW
Exhibit 2 826

Policy Number: PACE4281682
Effective Date: 1213/2022-1213/2023

7. Solely with respect to Coverage 1 F (Employee Benefits Administration Liability), each of the following is an insured:

Each of your employees who is or was authorized to administer your employee benefits program.
b. Any persons, organizations or employees having proper temporary authorization to administer your employee benefits program if you die, but only until your legal representative is appointed.

8. Your legal representative if you die, but only with respect to duties as such:. That representative will have all your rights and duties under this Policy.

No person or organization is an insured with respect to the conduct of any current or past partnership, joint venture or limited liability company that is not shown as a Named Insured in the Declarations.

III I IJ;IJI In,
111 "41 IIIR M Mur�
The following person(s) or entity(ies) are an insured under Coverage 3 - Professional Liability:

1. the first named insured and other named insured(s) expressly added to Item 1 of the Declarations;

2. any of your current or former directors, officers, partners, members, employees, or shareholders, as applicable, while acting within the scope of his or her duties as such, but only while rendering professional services on behalf of a named insured; and

3. the estate, heirs, executors, administrators and legal representatives of each named insured in the event of death, incapacity or bankruptcy of such insured, but only with respect to liability arising out of professional services rendered by a named insured prior to such death, incapacity or bankruptcy, and only to the extent that coverage would have been provided under Coverage 3 - Professional Liability.

FXAIJBMJ AMR UMMINE991111111M IM, Iiii! 11MOMM"M
Regardless of the number of claims, suits, claimants or insureds, the following limits of liability apply:

XMUMWMM= �
a. General Aggregate Limit and General Aggregate Cap
(1) The General Aggregate Limit set forth in Item 3 of the Declarations is the most we will pay for all loss under all Part 1 Coverages except: (i) damages because of bodily injury, property damage or environmental damage included in the products -coim p leted operations hazard, and (ii) crisis management costs that result from a crisis management event arising directly from your product.
(2) Subject to subparagraph (3) below, the General Aggregate Limit applies separately to:

F4VA 0 .TTaJT1JffJJ1W
Exhibit 2 827

WORKERS ERR COMPENSATION AND EMPLOYERS LIABILITY' INSURANCE E bt WC 04 03 0 (Ed, 4-84)
WAIVER OF OUR RIGHT RECOVER FROM OTHERS ENDORSEMENT— CALIFORNIA e ha,ve the right to recover our payrrr rrts Crcrn anyone liable for an nrrjrrry covered by this pofic;y We will riot sarttorce our right against the person or organization narrned 4-1 the Schedule., (This agreerrieM -appkes only to the extent fliat you per- form work Linder ra written, contract that requires you to obtGanrr this greeaurtwrctt Nrrr(rr cis.) YOU trnctst maintain payroll records sccur trsky segregating the remuneration rst your etriployees whde engaged in k'hr work described urr the Schedule,
The srt&6orast prerrit urn for this endorsement sk10 be . 0 020 % of thsa California workers' compensation prer6uarrr otherwise di.NP on such rerClun ration,
Schedule
Blanket - CA
Jots Description
Where r equirecl f)y writte.n savet r"act,
This r ndorsrn,rr nt ctrrwrrges the policy to which it rs attached and is effective on the dwe issued n.tNurss otherwise stated (The Information below is required airily when thiis endorsement is issued subsequent to preparation of the policy.) Endorsement nt ffeictrtwtrDate: 12 / 3 / 2 022 Policy No, 928938359844 Endorsement No Policy Effective Date,, 12/3/2022 to 12/3/2023 Ercarniurrw Nurswnr ct'w G I ENVIRONMENTAI, IN
DE„ &, GRO't.FNt:8WA EI- ERVICES, I N '
=wirer Name / t ode Argo aLit t:nsur,ance Cornpany
1�
Countersigned by
Exhibit 2
828

Policy Number: PACE4281682
Effective Date: 121312022-12/3/2023
Colony Specialty Envir(,")PACE Insurance Policy
This Policy provides certain insurance coverages on an occurrence, claims -made and reported, or discovery basis. Various provisions in this Policy restrict coverage. Please read the entire policy carefully to determine rights, duties and what is and is not covered.

Throughout this Policy the words and phrases that appear in bold have special meaning and are defined in section XXV. DEFINITIONS. The terms "we", "us", "our" and "insurer" refer to the Company providing this insurance. The terms "you" and "your" refer to the Named Insured shown in the Declarations and any other person or entity that qualifies as a Named Insured under this Policy.

In consideration of the payment of the premium and any deductible, when due, and in reliance upon all the statements made in the Application, made part of this Policy, including any other supplemental materials and information submitted in connection with the Application, and subject to all the terms of this Policy, the Company agrees to provide insurance coverage as described herein:

OW11WIJUM,
Each of the following coverages applies only if shown as purchased in the Declarations.

Coverages 1 A, 113, 1 C, 1 D, 1 E, 1 F and 1 G are referred to as the Part 1 Coverages.

Coverages 2A, 213, 2C, 2D and 2E are referred to as the Part 2 Coverages. Coverage 3 is Professional Liability coverage.

IlL COVERAGE 1A -- GENERAL LIABILITY BODILY INJURY AND PROPERTY DAMAGE

1. Insuring Agreement
We will pay those sums that the insured becomes legally obligated to pay as damages because of bodily injury or property damage that takes place during the policy period and is caused by an occurrence in the coverage territory.

2. Specific Exclusions
In addition to the exclusions in section IX COMMON EXCLUSIONS — PART 1 COVERAGES, Coverage 1 A does, not apply to:
a. Personal and Advertising Injury
Bodily injury arising out of personal and advertising injury. �$210111

1. Bodily injury, property damage, or any loss, cost, or expense arising out of any pollution condition; or

2. Any costs, charges or expense arising out of any:
(a) Request, demand, order or statutory or regulatory requirement that any insured or others test for, monitor, clean up, remediate, remove, contain, treat, detoxify, or neutralize, or in any way respond to, or assess the effects of pollutant or a pollution condition; or F4VA 0 .TTaJT§JffJJ1W

Page 17 ends

Exhibit 2 829

Policy Number: PACE4281682
Effective Date: 12/312022-1213/2023
where the claim arose or is being defended. In addition, we may exercise our right to require that such counsel:
meet certain minimum, qualifications with respect to competency, including possessing a minimum of five (5) years experience in defending claims similar to those asserted against the insured;
lb. maintain suitable errors and omissions insurance coverage; and C. agree, in writing, to respond in a timely manner to our requests for information regarding the claim.

An insured may, at any time, waive any right it may have to select independent counsel.

13. Inspection and Audit
With reasonable notice to you, we shall be permitted, but not obligated, to inspect, sample and monitor on a continuing basis your property, equipment and/or operations.

Neither, our right to make inspections, sample and monitor, nor the actual undertaking thereof, nor any report thereon shall constitute an undertaking, on behalf of or for the benefit of you or others, to determine or warrant that such property or operations are safe, healthful or conform to acceptable engineering practice or are in compliance with environmental laws, or any other law, rule or regulation. Further, the first named insured agrees on behalf of all insureds, to grant us both the right to interview, and access to, any insured whom we reasonably believe may have relevant information pertaining to any claim or pollution condition potentially covered under this Policy.

14. Other Insurance
If other valid and collectible insurance is available for any loss subject to coverage under this Policy, our obligations are limited as follows:

Primary Insurance
Except as provided in paragraph b. below, this insurance is primary. When this insurance is primary, our obligations are not affected unless any of the other insurance is also primary, in which case we will share with all other primary insurance by the method described in paragraph c. below. However, in the event that a written contract, written agreement or permit requires this insurance to be primary for any person or organization that you agreed to insure, and provided such person or organization is an insured under this Policy, this insurance will be primary and we will not seek contribution from any other insurance issued to such person or organization.
b. Excess Insurance
This insurance is excess over:
(1) Any other insurance, whether primary, excess, contingent or on any other basis that is: (i) Fire, Extended Coverage, Builder's Risk, Installation Risk or similar coverage for your work; (ii) Fire insurance for premises rented to you or temporarily occupied by you with permission of the owner; (iii) insurance purchased by you to cover your liability as a tenant for property damage to premises rented to you or temporarily occupied by you with permission of the owner; or (N) insurance applicable to loss arising out of the maintenance or use of aircraft, autos or watercraft; F4VA 0 .TTaJT§JffJJ1M
Exhibit 2 830

Policy Number: PACE4281682
Effective Date: 12/3/2022-12/312023
Misrepresentation or concealment by one insured shall not prejudice the interest or coverage for another insured under this Policy, except where such latter insured is a parent, subsidiary, or affiliate of the insured that committed such misrepresentation or concealment. For the purposes of this condition, an "affiliate" means an entity that directly or indirectly is controlled by, or is under common control with,, the insured that committed such misrepresentation or concealment. Notwith stand i ngi the forgoing, nothing stated herein shall preclude us from seeking and obtaining rescission of this Policy in the event of a material misrepresentation in the application for insurance. In addition, nothing stated herein shall operate to increase the limit(s) of liability provided hereunder.

16. Sole Agent
The first named insured shall act on behalf of all insureds for the payment of the Deductible, payment or return of premium, receipt and acceptance of any endorsement issued to form a part of this Policy, giivingi and receiving notice of cancellation, and the exercise of the rights provided in section XXIV. EXTENDED REPORTING PERIODS.

17. Subrogation
In the event of any payments, made pursuant to this Policy, we shall be subrogiated to any insured's rights of recovery against any person, entity or organization. The insured shall execute and deliver instruments and papers and do whatever is necessary to secure and perfect such rights. No insured shall do anything to prejudice such rights.

Any recovery obtained as a result of subrogation, after such expenses incurred in the subrogation proceedings are deducted by us, shall accrue first to the insured to the extent of any payments in excess of the Limit of Liability; then us to the extent of any payments made under this, Policy; and then to the insured to the extent of its Deductible.

However, solely with respect to Coverage (Part 1 or Coverage Part 2, if the insured has waived rights of recovery against any person, entity or organization prior to a loss or claim, we waive any right to recovery we may have under the policy against such person, entity or organization.

18. Voluntary Payments
The insured shall not settle any claim or suit or, with the exception of emergency expenses, make any voluntary payments without our prior written consent. If we recommend a settlement, the insured shall have the opportunity to consent to it, such consent not to be unreasonably withheld or delayed. If we recommend a settlement that is acceptable to a claimant for a total amount in excess of the applicable Deductible and within the applicable Limits of Liability and the insured refuses to consent to such settlement, then our liability for loss shall be limited to that portion of the recommended settlement, and the legal defense costs incurred as of the date of the insured's refusal, which exceeds the Deductible and falls within the applicable Limit of Liability.

XXiV. EXTENDED REPORTING PERIODS
This section XXIV. applies to Coverages 2C, 2D and 3 only.

We will provide one or more Extended Reportingi, Periods, as described below, if this Policy is terminated for any of the following reasons:
a. Cancellation by us for any reason other than failure to pay a premium when due or fraud or material misrepresentation;
F4VA 0 .TTaJT§JffJJ1W
Exhibit 2 831

Policy Number: G1UECOGG3GUO
Effective Date: 12/3/3022'13/3/3023

COMMERCIAL AUTOMOBILE
HAgg16 0312
THIS, ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY' This endorsement modifies insurance provided under the following:

BUSINESS AUTO COVERAGE FORM
To the extent that the provisions mfthis endorsement provide broader benefits to the "insured" than other provisions of the Coverage Form, the provisions of this endorsement apply.

A. Subsidiaries and Newly Acquired or
Formed Organizations
The Named Insured shown in the
Declarations is amended k)include:
(1) Any legal business entity other than a
partnership orjoint venture, formed as e
subsidiary in which you have an
ownership interest of more than 50% on
the effective date ofthe Coverage Form.

However, the Named Insured does not
include any subsidiary that is an
"insured" under any other automobile
policy or would be an "insured" under
such a policy but for its termination or
the exhaustion, ofits Limit nfInsurance.
(2) Any organization that is acquired o/
formed by you and over which you
maintain majority ownership. However,
the Named Insured does not include any
newly formed nranqairodorgonizoUon�
(a) That is a partnership or joint
venture,
(b) That ivan"inuured"under any other
policy,
(c) That has exhausted its Limit of
Insurance under any other policy, or
(d) 180 days or more after its
acquisition or formation by you,
unless you have given us notice of
the acquisition nrformation.

Cmva,oQe does not apply to "bodily
injury"' or "properly damagm" that nosu|in
from an "accident" that occurred before
you formed uracquired the organization,
B. Employees as Insureds
Paragraph A.1. WHO IS AN INSURED of
SECTION || - LIABILITY COVERAGE is
amended toadd:
d. Any "employee" of yours while using a
covered "auto"' you don't own, hire or
borrow in your business or your
personal affairs.

C. Lessors as Insureds
Paragraph A1.-WHO |SANINSURED -o[
Section U| - Liability Coverage is amended to
add:
a. The lessor of aoovmrod ~au1n^ while the
"auto" is |mooed to you under owritten
agreement it.-
(l) The agmeoomrd requires you to
provide direct primary insurance for
the lessor and
(2)The "auto" is leased without adriver.

Such a leased "auto" will be considered a
covered "auko''you own and not 000vered
`'auto°you hire.

D. Additional Insured it Required by Contract
(1) Paragraph A.1. VVHD IS AN INSURED
- of Section U - Liability Coverage is
amended to add:
t When you have agreed, in awhttem
contract orwritten agreement, that a
person ororganization be added as
an additional insured on your
business auto po|ioy, such person or
organization is an ''|nomrnd", but only
to the extent such person or
organization is liable for ''tmdi|y
irjuryror"properly damage" caused
bythe conduct Vfun^inwumed^under
paragraphs a. or b. of Who Is An
Insured with regard to the
ownership, maintenance oruse ofa
covered "auto."
0D2811,The Hartford (Includes copyrighted material
Form H4891GO3 12 of ISO Properties, Inc., with its permission.) Page I of Exhibit 832

Policy Number: O1UECDGO36OO
Effective Date: 12/3/2022'12/3/2023
The insurance afforded to any such
additional insured applies only if the
"bodily injury" or "property damage"
occurs:
(1) During the policy period, and
(2) Subsequent hothe execution ofsuch
written contract, and
(3) Prior to the expiration of the period
of time that the written omn1/ooi
requires such insurance beprovided
to the additional insured.
(2) How Limits Apply
If you have agreed in awrittom contract
or written agreement that another
person ororganization beadded as an
additional insured on your pm|ioy, the
most we will pay on behalf of such
additional insured isthe lesser of:
(a) The limits of insurance opeoJ|od in,
the written ounknyct or written
agreement; or
(b) The Limits of Insurance shown in
the Declarations.

Such amount shall beapart nfand not
in addition to Limits of Insurance shown
inthe Declarations and described inthis
Section.
(3) Additional Insureds Other Insurance
If wecover mclaim or''ouit"'under thiia
Coverage Part that may also be covered
by other insurance available to an
additional insured, such additional
insured must submit such claim or^suht"
to the other insurer for defense and
indemnity.

Hom/evor, this provision does not apply
to the extent that you have agreed in a
written contract or written agreement
that this insurance is primary and non-
contributory with the additional imsurod'o
own insurance.
(4) Duties in The Event {XAccident, Claim,
Suit orLoss
If you have ugn*od in uwrittem contract
or written agreement that another
person nrorganization beadded ao an
additional insured on your pm0cy, the
additional insured shall be required to
comply with the provisions in LOSS
CONDITIONS 2. DUTIES IN THE
EVENT OF ACCIDENT, CLAIM . SUIT
OR LOSS — OF SECTU{)N |V —
BUSINESS AUTO CONDITIONS, in the
same manner asthe Named Insured.

E. Primary and Non -Contributory if
Required by Contract
Only with respect to insurance provided to
an additional insured in 1.D. - Additional
Insured K Required by Contract, the
following provisions apply:
(3) Primary Insurance When Required By
Contract
This insurance is primary if you have
agreed in e written oomtnud or written
agreement that this imumnsmoe be
primary. U other insurance is also
primary, vvewill share with all that other
insurance by the method described in
Other Insurance 5.d.
(4) Primary And Nom-ContributoryTo Other
Insurance When Required ByContract
If you have agreed in mvv/ittmm contract
or written agreement that this insurance
is primary and nun -contributory with the
additional insurad'omwn insurance, this
insurance is primary and we will not
seek contribution from that other
insurance.

Paragraphs (3)and (4)donot apply toother
insurance to which the additional insured
has been added aaonadditional imaured.

When thiio insurance is exoean, we will have no
duty to defend the insured against any "suit"' if
any other |muunar has a dub/ to defend the
insured against that "suit". It no other insurer
defends, we will undertake to do oo, but vvewill
be entitled to the |noumad,n rights against all
those other immurora.

When this insurance is excess over other
insuranoe, we will pay only our share of the
amount of the loss, if any, that exceeds the sum
of:
(1) The total amount that all such nihm«
|msunsmoe would pay for the loss in the
absence ofthis insurance; and
(2) The total of all deductible and sell -insured
amounts under all that other insurance.

We will share the remaining |unu, it any, by the
method described imOther Insurance 5.d.

2. AUTOS RENTED BY EMPLOYEES
Any ^uuk)^ hired or rented by your "employee"
on your behalf and at your divao|mm will be
considered am''autm^you hire.

The OTHER INSURANCE Condition ioamended
by adding the following:
0D2811,The Hartford (Includes copyrighted material
Form H4891GO3 12 of ISO Properties, Inc., with its permission.) Page of Exhibit 833

Policy Number: 61UECDG63600
Effective Date: 12/3/2022-1213/2023
Exhibit 2
It an "employee's" personal insurance also 5.
applies on an excess basis to a covered "auto"
hired or rented by your "employee" on your
behalf and at your direction, this insurance will
be primary to the "employee's" personal
insurance.

3. AMENDED FELLOW EMPLOYEE EXCLUSION
EXCLUSION 5. - FELLOW EMPLOYEE - of
SECTION 11 - LIABILITY COVERAGE does not
apply if you have workers' compensation
insurance in -force covering all of your
"employees".

Coverage is excess over any other collectible
insurance.

4. HIRED AUTO PHYSICAL DAMAGE COVERAGE
If hired "autos" are covered "autos" for Liability
Coverage and it Comprehensive, Specified
Causes of Loss, or Collision coverages are
provided under this Coverage Form for any
"auto" you own, then the Physical Damage
Coverages provided are extended to "autos" you
hire or borrow, subject to the following limit.

The most we will pay for "loss" to any hired
"auto'" is:
(1) $100,0001;
(2) The actual cash value of the damaged or
stolen property at the time of the "loss"; or
(3) The cost of repairing or replacing the
damaged or stolen property,
whiichever is smallest, minus a deductible. The
deductible will be equal to the largest deductible
applicable to any owned "auto" for that
coverage. No deductible applies to "loss" caused
by fire or lightning. Hired Auto Physical Damage
coverage is excess over any other collectible
insurance. Subject to the above limit, deductible
and excess provisions, we will provide coverage
equal to the broadest coverage applicable to any
covered "auto" you own.

We will also cover loss of use of the hired "auto"
if it results from an "accident", you are legally
liable and the lessor incurs an actual financial
loss, subject to a maximum of $1000 per
"accident"'.

This extension of coverage does not apply to
any "auto" you hire or borrow from any of your
"employees"', partners (if you are a partnership),
members (if you are a limited liability company),
or members of their households.

PHYSICAL DAMAGE ADDITIONAL

TEMPORARY TRANSPORTATION EXPENSE

COVERAGE
Paragraph A.4.a. of SECTION III - PHYSICAL
DAMAGE COVERAGE is amended to provide a
limit of $50 per day and a maximum limit of
$1,000.

6. LOAN/LEASE GAP COVERAGE
Under SECTION III - PHYSICAL DAMAGE
COVERAGE, in the event of a total "loss" to a
covered "auto", we will pay your additional legal
obligation for any difference between the actual
cash value of the "auto" at the time of the "loss"
and the "outstanding balance" of the loan/lease.
"Outstanding balance" means the amount you,
owe on the loan/lease at the time of "loss" less
any amounts representing taxes; overdue
payments; penalties, interest or charges
resulting from overdue payments; additional
mileage charges; excess wear and tear charges;
lease termination fees; security deposits not
returned by the lessor; costs for extended
warranties, credit life Insurance, health, accident
or disability insurance purchased with the loan or
lease; and carry-over balances from previous
loans or leases.

7. AIRBAG COVERAGE
Under Paragraph B. EXCLUSIONS - of

SECTION III - PHYSICAL DAMAGE
COVERAGE, the following is added:

The exclusion relating to mechanical breakdown
does not apply to the accidental discharge of an
airbag.

8. ELECTRONIC EQUIPMENT - BROADENED

COVERAGE
a. The exceptions to Paragraphs B.4 -
EXCLUSIONS - of SECTION III - PHYSICAL
DAMAGE COVERAGE are replaced by the
following:

Exclusions 4.c. and 4.d. do not apply to
equipment designed to be operated solely
by use of the power from the "auto's"
electrical system that, at the time of "loss",
is:
(1) Permanently installed in or upon
the covered "auto";
(2) Removable from a housing unit
which is permanently installed in
or upon the covered "auto";
(3) An integral part of the same unit
housing any electronic
equipment described in
Paragraphs (1) and (2) above; or
@ 2011, The Hartford (Includes copyrighted material
Form HA 9916 03 12 of ISO Properties, Inc., with its permission.) Page 3 of 5 834

Policy Number: 61UECDG63600
Effective Date: 12/312022-12/3/2023
(4) Necessary for the normal
operation, of the covered "auto" or
the imonitoring of the covered
11 auto's" operating system.
b.Section III — Version CA 00 01 03 10 of the
Business Auto Coverage Form, Physical
Damage Coverage, Limit of Insurance,
Paragraph C,2 and Version CA 00 01 10 01 of
the Business Auto Coverage Form, Physical
Damage Coverage, Limit of Insurance,
Paragraph C are each amended to add the
following:
$1,500 is the most we will pay for "loss" in,
any one "accident" to all electronic
equipment (other than equipment designed
solely for the reproduction of sound, and
accessories used with, such equipment)
that reproduces, receives or transmits
audio, visual or data signals which, at the
time of "loss"', is:
(1) Permanently installed in or upon
the covered "auto" in a housing,
opening or other location that is not
normally used by the "auto"
manufacturer for the installation of
such equipment;
(2) Removable from a permanently
installed housing unit as described
in Paragraph 2.a. above or is an
integral part of that equipment; or
(3) An integral part of such equipment.
c. For each, covered "auto", should loss be limited
to electronic equipment only, our obligation to
pay for, repair, return or replace damaged or
stolen electronic equipment will be reduced by
the applicable deductible shown in the
Declarations, or $250, whichever deductible is
less.

9. EXTRA EXPENSE BROADENED

COVERAGE
Under Paragraph A. - COVERAGE - of SECTION
III - PHYSICAL DAMAGE COVERAGE, we will
pay for the expense of returning a stolen covered
"'auto"' to you.

10., GLASS, REPAIR - WAIVER OF DEDUCTIBLE
Under Paragraph, D. - DEDUCTIBLE - of SECTION
III - PHYSICAL DAMAGE COVERAGE, the
following is added:

It another Hartford Financial Services Group,
Inc. company policy or coverage form that is not
an automobile policy or coverage form applies to
the same "accident", the following applies:
(1) If the deductible under this Business Auto
Coverage Form is the smaller (or smallest)
deductible, it will be waived;
(2) If the deductible under this Business Auto
Coverage Form is not the smaller (or
smallest) deductible, it will be reduced by
the amount of the smaller (or smallest)
deductible.

12. AMENDED DUTIES IN THE EVENT OF

ACCIDENT, CLAIM, SUIT OR LOSS
The requirement in LOSS CONDITIONS 2.a. -

DUTIES IN THE EVENT OF ACCIDENT,CLAIIM,
SUIT OR LOSS - of SECTION IV - BUSINESS
AUTO CONDITIONS that you must notify us of
an "accident" applies only when the "accident" is
known to:
(1) You, if you are an individual;
(2) A partner, if you are a partnership,
(3) A member, if you are a limited liability
company; or
(4) An executive officer or insurance manager, if
you are a corporation.

13. UNINTENTIONAL FAILURE TO DISCLOSE

HAZARDS
It you unintentionally fail to disclose any hazards
existing at the inception date of your policy, we
will not deny coverage under thiis Coverage
Form because of such failure.

14. HIRED AUTO - COVERAGE TERRITORY
Paragraph, e. of GENERAL CONDITIONS 7.

POLICY PERIOD, COVERAGE TERRITORY
of SECTION IV - BUSINESS AUTO
CONDITIONS is replaced by the following:
e. For short-term hired "autos", the coverage
territory with respect to Liability Coverage is
anywhere in the world provided that if the
"insured's" responsibility to pay damages for
"bodily injury" or "property damage" is
determined in a "suit," the "suit" is brought in
the United States of America, the territories
and possessions of the United States of
America, Puerto Rico or Canada or in a
settlement we agree to.

No deductible applies to glass damage if the 15. WAIVER OF SUBROGATION glass is repaired rather than replaced. TRANSFER OF RIGHTS OF RECOVERY

11., TWO OR MORE DEDUCTIBLES AGAINST OTHERS TO US - of SECTION IV - Under Paragraph D. - DEDUCTIBLE - of SECTION BUSINESS AUTO CONDITIONS is amended by III - PHYSICAL DAMAGE COVERAGE, the adding the following:
following is added:
2011, The Hartford (Includes copyrighted material
Form HA 9916 03 12 of ISO Properties, Inc., with its permission.) Page 4 of 5 Exhibit 2 835

Policy Number: 61UECDG63600
Effective Date: 12/3/2022-121312023
We waive any right of recovery we may have
against any person or organization with whom
you have a written contract that requires such
waiver because of payments we make for
damages under this Coverage Form.

16., RESULTANT MENTAL ANGUISH COVERAGE
The definition of "bodily injury" in SECTION V-
DEFINITIONS is replaced by the following:
"Bodily injury" means bodily injury, sickness or
disease sustained by any person, including
mental anguish or death resulting from any of
these.

17. EXTENDED CANCELLATION CONDITION
Paragraph 2. of the COMMON POLICY
CONDITIONS - CANCELLATION - applies
except as follows:

It we cancel for any reason other than
nonpayment of premium, we will mail or deliver
to the first Named Insured written notice of
cancellation at least 60 days before the effective
date of cancellation.

18. HYBRID, ELECTRIC, OR NATURAL GAS

VEHICLE PAYMENT COVERAGE
In the event of a total loss to a "non -hybrid" auto
for which Comprehensive, Specified Causes of
Loss, or Collision coverages are provided under
this Coverage Form, then such Physical
Damage Coverages are amended as follows:
a.lf the auto is replaced with a "hybrid" auto or
an auto powered solely by electricity or natural
gas, we will pay an additional 10%, to a
maximum of $2,500, of the "non -hybrid"' auto's
actual cash value or replacement cost,
whichever is less,
b.The auto must be replaced and a copy of a bill
of sale or new lease agreement received by us
within 60 calendar days of the date of "loss,"
c. Regardless of the number of autos deemed a
total loss, the most we will pay under thiis
Hybrid, Electric, or Natural Gas Vehicle
Payment Coverage provision, for any one
"loss" is $10,000.

For the purposes of the coverage provision,
a.A "non -hybrid" auto is defined as an auto that
uses only an internal combustion engine to
move the auto but does not include autos
powered solely by electricity or natural gas.
b.A "hybrid" auto is defined as an auto with an
internal combustion engine and one or more
electric motors; and that uses the internal
combustion engine and one or more electric
motors to move the auto, or the internal
combustion engine to charge one or more
electric motors, which move the auto,

19. VEHICLE WRAP COVERAGE
In the event of a total loss to an "auto" for which
Comprehensive, Specified Causes of Loss, or
Collision coverages are provided under this
Coverage Form, then such Physical Damage
Coverages are amended to add the following:

In addition to the actual cash, value of the "auto",
we will pay up to $1,000 for vinyl vehicle wraps
which are displayed on the covered "auto" at the
time of total loss. Regardless of the number of
autos deemed a total loss, the most we will pay
under this Vehicle Wrap Coverage provision for
any one "loss" is $5,000. For purposes of this
coverage provision, signs or other graphics
painted or magnetically affixed to the vehicle are
not considered vehiicle wraps.
@ 2011, The Hartford (Includes copyrighted material
Form HA 9916 03 12 of ISO Properties, Inc., with its permission.) Page 5 of 5 Exhibit 2 836

Policy Number: EXC4281883
Effective Date: 13/3/2022'13/3/2033
Various, provisions in this restrict coverage.

Read the entire policy carefully to determine hQhha,
duties and what is, and is not covered.

Throughout this policy the words "'you" and ~your"
refer tmthe Named Insured shown inthe Declarations,
and any other person ororgomization qualifying as
Named Insured under this policy. The words "we',
^'uo" and "our" refer to the company providing this
insurance. The word "insured" means, any person or
organization qualifying as such under the "applicable
undedyimgkmaunsmm*°.

Other words and phrases that appear in quotation
nnorkm in this policy have special meaning. Refer to
SECTION UV — DEFINITIONS. Other wmnjn and
phrases that are not defined under tbia policy but
defined in the, "applicable underlying |maunenca'' will have the meaning described in the policy of
"underlying insurance".

The imourmnoa provided under this policy will follow
the name provisions, exclusions and limitations that
are contained in the "applicable underlying
inoumamco'', um|eaa otherwise dimwmhad by this
insurance. To the m»demt such provisions differ or
cmnOiot, the provisions of this policy will apply.

However, this policy will not provide coverage for an
"event" on|eao all the "applicable underlying
inaumamue^ provides coverage for the "event". Under
nocircumstances will coverage provided bthis policy
ever be broader than umwenmgo provided by all the
"applicable underlying inaumenoe"
SECTION |—COVERAGES

1. Insuring Agreement
a. We will pay on behalf of the insured the
..ultimate net |mem^ in excess of the "retained
||rm|t^ because mf~|njurynrdamage" for which
the insured is legally obligated to pay and ho
which this insurance applies.

We have no duty to investigate any claim, suit
or proceeding or defend under this policy.

However, at our em|o discretion we have the
right and will be 0ivem the opportunity to
effectively associate in the defense or
investigation of any o|einn, suit or pruoeedimg.

Atour sole discretion we also have, the right to
assume charge of, negotiate and settle any
o|aim, suit or proceeding to which this policy
applies. In all such circumstances the insured
will cooperate with us fully,
XPCOVFORM-0815

COMMERCIAL EXCESS LIABILITY
But:
(1),The amount we will pay for "ultimate net
loss" is limited as described in SECTION U|
— L|KADS OF INSURANCE, and
(2),Our right to defend terminates, when we
have exhausted the applicable Qrm|\ of
insurance in the payment of "ultimate net
loss" under this Coverage Part. Huwever,
if any policy of "underlying insurance"
specifies that limits are reduced by
defense expenses, our right to defend
terminates when we have used up the
applicable limit of insurance in the
payment of "ultimate net |mas" under this
Coverage Part.
�b, An additional insured under "applicable
underlying insunanoe^wdU automatically beam
additional insured under this insurance. If
coverage provided hothe additional insured is
required byacontract oragreement, the most
we will pay on behalf of the additional insured
is the |oamor of the amount of insurance
required bythe contract oravailable under the
limits of insurance provided under this policy,
less any amounts payable byany ,"undedyimg
|mourmmoe^
Additional insured coverage provided bythia
insurance will not be broader than coverage
provided by all "applicable underlying
imsuremoe~

2. Exclusions
The following exclusions, and any other exclusions
added by endorsement, apply to this policy. If any
exclusion of "underlying insurance" conflicts with
any exclusion:, in this po|icy, that exclusion of this
policy will apply. However, if that exclusion would
result in broader coverage, than is provided by the
,.underlying insumemce~, the exclusion: of the
'.underlying insurance" will apply. This policy will
not provide broader nwwsnagm than that provided
by all "appticable underlying insurance".

This insurance does not apply to:
includes copyrighted material ,«insurance Services Offices, Inc.

Page 1 of 6 ends

Policy Number: EXC4281683
Effective Date: 12/3/2022'12/3/2023
a. Medical Payments
Medical payments omvemgm, medical
expenses uovenaAo, or associated expenses
that are provided without regard to fault,
whether or not provided by the "applicable
under|ylmginaumance°
b. Auto
Any loss, cost orexpense payable under or
resulting from any of the hd|uwin0 auto
coverages:
(1) First -party physical damage coverage;
(2) No-fault coverage;
(3) Personal injury protection or auto medical
payments coverage; or
(4) Uninsured or umderinsun»d motorists
c. Pollution
(1) "Injury ordamage" whch would not have
occurrad, in whole or in part, but for the
actuml, alleged or threatened dioohmrge,
dloperaa|, seepage, mniQmstion, release or
escape mfpollutants atany time.
(2) Any |oam^ oms1 or expense arising out of
any:
m. Request, demand, order orstatutory pr
regulatory requirement that any
insured or others test for, monitor,
o|*am up, renmove, oomtoKn, tmamL
detoxify or nemtraUze, or in any way
respond to, or assess the effects of,
pollutants; or
b. C|a�m or auft by or on behalf of a
governmental authority for damages
booeumo of testing for, monitoring,
cleaning up, removing, containing,
treating, detoxifying or neutro|izing, or
in any way responding to, or
assessing the effects of. pollutants.

This exclusion does not apply to the extent
that valid "applicable underlying insurance" for
the pN|wdmm liability risks demcidbed above
exists or vvnu|d have existed but for the
exhaustion of underlying, limits for "injury or
damage".
d.Workers' Compensation And Similar Laws
Any obligation: of the insured under m workers'
oompememUom^ disability benefits or
unemployment compensation: |avv or any
similar law.

XPCOVFORM-0815
e. Asbestos
(1) any claim for "injury mrdamage" arising, in:
whole or in part, out of the actual, aUegad,
threatened or suspected inhalation of,
ingestion of, contact with, exposure to,
existence of, or presence of. uebeatmo |m
any form.
(2) any dmrmmgoa, loas,, cost or expense
arieinO, in whole or in pert, out of the
mbmtlnO' testing for, mom|tmdmg` cleaning
up, renmcw1m#, containing, tneuUng,
detoxifying, neutralizing, remediating or
disposing of, or in any way responding to
or assessing the effects of, asbestos in:
any form, by any insured orbyany other
person or entity,
(3) any claim or suit by or on behalf of a
governmental authority for damages, |uua,
cost orexpense arising, inwhole nrinpart,
out of the abating, testing for, nnomitmring,
cleaning up, removing, containing,
tneadng, dehoxihing, meuima|izinA,
namedieQnA urdisposing of, or imany way
responding tmurassessing the effects of,
asbestos in: any form, byany insured orby
any other person: orentity.

This exclusion shall apply without regard tnthe
source orsources of asbestos, or the basis of
the inymrod'o liability. This exclusion includes
defects or negligence in deeign, ommatruofiom
or materio|s, or any other event, conduct or
nmisoomduct, which may have or is claimed to
have preoipibated, caused or acted jmimt|y,
concurrently urinany sequence with asbestos
imany form imcausing "injury ordamomge^
f. Obligations mf"Underlying Insurance"
°[njury or damage" for which the liability or
obligation under "underlying insurance" is
um|imftedbylaw.

0. P,re-Ex|stingi Damage orInjury
(1) Any "injury or damage," whether such
^1njurynrdamage" |sknown orunkmmmm:
a. VVftich hnat occurred prior to the
inception, dote of this policy (or the
retroactive date of this po|ioy, if any,
whichever ieear|ied;or
b. VVhiioh is, or alleged to be. in the
process of occurhngi at the unmepfiom
dole of the policy (or the retroactive
date of this, policy, if any, whichever is
earlier) even if the ~event' continues
during this policy period.
(2) Any "injury mrdamage,~ whether known or
unkmawn, which is in the process of
includes copyrighted material ,«insurance Services Offices, Inc.

Page 2 of 6 ends

Policy Number: EXC4281683
Effective Date: 1213/2022-12/3/2023
settlement, adjustment or suit as of the
inception date of this policy (or the
retroactive date of this policy, if any,
whiichever is earlier).
"Injury or damage" which first occurs during
this policy period includes any continuation,
change or resumption of that '1njury or
damage" after the end of this policy period.
h. Sublimited Coverage
Any coverage in any "underlying insurance"
whiich is subject to reduced limits of insurance
different from the limits of insurance, stated in
the Schedule of Underlying Insurance, whether
it be referred to as a sublimit, or any other
basis.

SECTION 11 — LIMITS OF INSURANCE
1, The Limits of Insurance shown in the
Declarations, and the rules below fix the most we
will pay regardless of the number of:
a. Insureds;
b. Claims made or suits brought, or number of
vehicles involved;
c. Persons or organizations making claims or
bringing suits; or
d. Coverages or limits, available under any
"11 underlying insurance".

2. The Limits of Insurance of this policy will apply as follows:
a. This insurance only applies in excess of the
"retaiined limit"'.
b. The Aggregate Limit is, the most we will pay
for the sum of all ""ultimate net loss", for all
"injury or damage" covered under thins policy..

However, this Aggregate Limit only applies to
"injury or damage" that is subject to an
aggregate limit of insurance under the
`"applicable underlying insurance".
c. Subject to Paragraph 2.b. above, the Each
Occurrence Limit is the most we will pay for
the sum of all "ultimate net loss" under this
insurance because of all "injury or damage"
arising out of any one "event".
d. If the Limits of Insurance of any "applicable
underlying insurance" are reduced by defense
expenses by the terms of that policy, any
payments for defense expenses we make will
reduce our applicable Limits of Insurance.

XPCOVFORM-0815

3. If any "underlying insurance"' has a policy period
that is different from the policy period of this policy then, for the purposes of this insurance, the
"retained limft" will only be reduced or exhausted
by payments made for "injury or damage" covered
under this insurance during the policy period of
this policy.

4. The limits of "underlying insurance" will not be
deemed to be reduced or exhausted by payments
for "injury or damage" not covered under this
policy.

The Aggregate Limit of this policy applies separately
to each consecutive annual period of this policy and
to any remaiining period of this policy of less than 12 months, starting with the beginning of the policy
period shown in the Declarations, unless the policy
period is extended after issuance for an additional
period of less than 12 months, In that case, the
additional period will be deemed part of the last
preceding period for purposes of determining the
Limits of Insurance.

The following Conditions apply. In: addition, the
Conditions applicable to any "underlying insurance""
are also applicable to the coverage provided under
this insurance. To the extent such conditions differ or conflict, the conditions of this policy will apply.

1. Appeals
If any "underlying insurer" or insured elects not to
appeal a judgment in excess of the amount of the
"retained limit", we may do so at our own:
expense. We will also pay for taxable court costs,
pre- and postjudgment interest and
disbursements associated with such appeal. In no
event will this provision increase our liability
beyond the applicable Limits of Insurance
described in SECTION III — LIMITS OF
INSURANCE.

2. Bankruptcy
a. Bankruptcy Of Insured
Bankruptcy or insolvency of the linsured or of
the insured's estate will not relieve us of our
obligations under this policy.
b. Bankruptcy Of Any Underlying Insurer
Bankruptcy of any "underlying insurer" will not
relieve us of our obligations under this policy.

However, insurance provided under this policy will
not replace any "underlying insurance" in the
event of bankruptcy or insolvency of any
"underlying insurer". The insurance provided
under this policy will apply as if all "underlying
insurance"' were in full effect and recoverable.
includes copyrighted material of insurance Services Offices, Inc. with its permission.

Page 3 of 6 ends

Exhibit 2 840

Policy Number: EXC4281683
Effective Date: 12/312022-12/3/2023
3, Duties IIn The Event Of An Event, Claim Or Suit
a. You must see to lit that we are notified as
soon as pracficable, of an "event", regardless
of the amount, which may result in: a claim
under this insurance. To the extent possible,
notice should include:
(1) How, when and where the "'event" took
place;
(2) The, names and addresses of any injured
persons and witnesses; and
(3) The nature and location of any "injury or
damage" arising out of the "event",
b. If a claim is made or suit is brought against
any insured, you must:
(1) Immediately record the specifics of the
claim or suit and the date received; and
(2) Notify us as soon as practicable.

You must see to iit that we receive written
notice of the claim or suit as soon as
practicable,
c. You and any other insured involved must:
(1) lmmecluately send us copies of any
demands, notices, summonses or legal
papers received in connection, with the,
claim or suit;
(2) Authorize us to obtain records and other
information;
(3) Cooperate with us in the investigation or
settlement of the claim or defense against
the suit; and
(4) Assist us, upon our request, in the
enforcement of any right against any
person or organization which may be liable
to the insured because of "injury or
damage" to whiich this insurance, may also
apply.
d. No insured will, except at that inisured's own
cost, voluntarily make a payment, assume
any obligation, or incur any expense, other
than for first aid, without our consent.

4. F'irst Named Insured Duties
The first Named Insured is the person or
organization first named in the Declarations and is
responsible for the payment of all premiums. The
first Named Insured will act on behalf of all other
Named Insureds for giving and receiving of notice
of cancellation or the receipt of any return
premium that may become payable.

XPCOVFORM-0815
At our request, the first Named Insured will furnish
us, as soon as practicable, with a complete copy
of any "underlying insurance" and any
subsequently issued endorsements or policies
which may in any way affect the insurance
provided under this policy.

5. Cancellation
a. The first Named Insured shown in the
Declarations may cancel this policy by mailing
or delivering to us advance written notice of
cancellation.
b. We may cancel this policy by mailing or
delivering to the first Named Insured written:
notice of cancellation at least:
(1) 10 days before the effective date of
cancellation if we cancel for nonpayment
of premium; or
(2) 30 days before the effective date of
cancellation if we cancel for any other
reason.
c. We will mail or deliver our notice to the first
Named Insured's last mailing address known
to us.
cl, Nofice of cancellation MI state the effective
date of cancellation. The policy period will
end on that date.
e. If this policy is cancelled, we will send the first
Named Insured any premium refund due. If
we cancel, the refund will be pro rata. If the
first Named Insured cancels, the refund may
be less than pro rata. The cancellation will be
effective even if we have not made or offered
a refund, or if the refund offered has been:
incorrectly calculated.
f. If notice, is mailed, proof of mailing will be
sufficient proof of notice.
g. Notice of cancellation to the first Named
Insured will serve as notice of cancellation to
all insureds. No notice of cancellation will be
provided to anyone other than the first Named
Insured.

6. Changes
This policy contains all the agreements between
you and us concerning the insurance afforded.

The first Named Insured is authorized by all other
insureds to make, changes in the terms of this
Policy with our consent. This policy's terms can
be amended or waived only by endorsement.
includes copyrighted material of insurance Services Offices, Inc. with its permission.

Page 4 of 6 ends

Exhibit 2 841

Policy Number: EXC4281683
Effective Date: 12/3/2022-12/312023
7, Maintenance OfIChanges To Underlying
Insurance
All "underlying insurance" must be maintained in
full effect without reduction of coverage or limits
except for the reduction of aggregate limits in
accordance with:, the provisions of such
".underlying insurance" that results from "injury or
damage" to which this insurance applies during
the policy period of this policy. Such exhaustion or
reduction is not a failure to maintain "underlying
insurance".

The first Named Insured must notify us in writing,
as soon as practicable, if any "underlying
insurance" is cancelled, not renewed, replaced or
otherwise terminated, or if the limits or scope of
coverage of any "underlying insurance" is
changed. You must see to it that the terms and
conditions of renewals or replacements of
underlying insurance, shown in the Schedule of
Underlying, will be materially the same as the
prior coveragie, unless we agree otherwise.

In the event of the Insured's failure to maintain
"underlying insurance" in full force and effect,
coverage, hereunder shall not be invalid, but shall
apply to the same extent that it would have
applied' had there been compliance with, this
condition and in no event will our liability be more
than it would have been if there, had been no such
change in "underlying insurance" unless we
agreed to the change in writing.

F. in DR IT-72 MIMMIM7
a. This insurance is excess over, and shall not
contribute with any other insurance, whether
primary, excess, contingent or on: any other
basis. This condition will not apply to
insurance specifically written as excess over
this policy.

When this insurance is excess, if no other insurer
defends, we may undertake to do so, but we will
be entitled to the insured's rights against all other
insurers.
b. When this insurance is excess over other
insurance, we will pay only our share of the
"ultimate net loss" that exceeds the sum of:
(1) The total amount that all such other
insurance would pay for the loss in the
absence of the insurance provided under
this l

9. Policy Premium
We will compute all premiums for this policy in
accordance with our rules and rates. The policy
premium is not subject to audit.

10. Loss Payable
Our obligation to make payment for "ultimate net
loss", which is covered under the terms and
conditions of this policy, does not apply to a given
claim unless and until:
a. The insured or insured's "underlying insurer"
has become legally obligated to pay the
.,retained limit":
b. The obligation of the insured to pay the
.,ultimate net loss"' in excess of the "retained
limit" has been determined by a final
settlement or judgment or written agreement
among the insured, claimant, "underlyiingi
insurer" (or a representative of one or more of
these) and us; and
c. All "underlying insurers" have paid the
amounts due for the claim under "applicable
underlying insurance".

11. Legal Action Against Us
No action shall be taken against us unless, as a
condition precedent, there has been:
a. Full compliance with all the provisions of this
policy, and
b, The amount of our obligation to pay has been:
finally determined either by final and non -
appealable judgment against the Insured after
trial, or by written agreement between, you,
the claimant and us.

No person or organization shall have the right
under this policy to join us as a party to any claim,
suit or proceeding against the insured to
determine, the, Insured's liability, nor shall we be
impleaded by any insured or their legal
representative in any such claim, suit or
proceedingi.

12. Subrogiation — Recoveries
a. In the event of any payment under this policy,
we, shall be subrogated to all your rights of
recovery against any person or organization,
and you shall execute and deliver instruments
and papers and do whatever else is
necessary to secure such rights.
(2) The total of all deductible and self -insured b. Any amounts recovered after any payment amounts under all other insurance; and under this policy shall be apportioned as (3) All other mechanisms (including follows:
contractual obligations of any person: or
organization to the Insured) arranged for
funding of "ultimate net loss".

XPCOVFORM-0815 includes copyrighted material of insurance Services Offices, Inc. Page 5 of 6 with its permission.

Exhibit 2 842

Policy Number: EXC4281683
Effective Date: 12/3/2022-12/312023
(1) First, we shall receive all amounts
recovered until we have been: fully
reimbursed for all amounts we have
incurred, including costs or expenses of 8
such recovery proceedings;
(2) Then, you are entitled to claim for any
further amount recovered.

13. When We Do Not Renew
If we decide not to renew this policy, we will mail
or deliver to the first Named Insured shown in the
Declarations written: notice of the nonrenewal not
less then 30 days before the expiration date.

If notice is mailed, proof of maMngi will be
sufficient proof of notice.

SECTION IV — DEFINITIONS
The definitions of any "applicable underlying
insurance" also apply to this insurance. In addition,
the following definitions apply.

1. "Applicable underlying insurance" means the
policy or policies of "underlying insurance" which
provide underlyingi coverage for loss that resulted
in a claim under this insurance.

2. "Controlling underlying insurance" means
"applicable underlying insurance".

3. "Controlling underlyiingi insurer" means any insurer who provides any policy of insurance that
qualifies as the "applicable underlying insurance".

4. "Event" means, including but not limited to, an
occurrence, offense, accident or act, to whiich, the
"applicable underlying insurance" applies.

5. "Injury or damage"' means any injury or damage,
covered in the "applicable underlying insurance"
arising from an "event".

6. "Retained limit"' means the sum of:
a. The limits of "underlying insurance"' applicable
to the claim;
b. Any self insured retentions contained therein;
and
c. Any amount you must pay because the
"underlying insurance", as represented by
you, is not available for any reason.

7. "Ultimate net loss" means the total sum, after
reduction for recoveries, or salvages collectible,
that the insured becomes legally obligated to Ipay
as damages by reason of:
a. Settlements entered into with our consent,
judgments, binding arbitration,; or
b. Other binding alternate dispute resolution
proceeding entered into with our consent.

XPCOVFORM-0815
"Ultimate net loss" includes defense expenses if
any "underlying insurance"" specifies that limits
are reduced by defense expenses.
"Underlyingi insurance" means any policy of
insurance listed on the Schedule of Underlying
Insurance.

9. "Underlying insurer"' means any insurer who
provides any policy of insurance listed on the
Schedule of Underlyingi Insurance,
includes copyrighted material of insurance Services Offices, Inc. with its permission.

Page 6 of 6 ends

Exhibit 2 843

Policy Number:EXC4281683
Effective Date: 13/3/2023'12/3/2023
This endorsement modifies insurance providedunder the following:

SECTION III —CONDITIONS, 12. Subrogation — Recoveries is amended and the following added:

Newill waive any right Ofrecovery memay have against any person ororganization because of payments we make for "injury ordamage" provided you agreed to provide such waiver in avwhtten contract that is signed and executed prior to any loss to which this insurance applies. This waiver will only apply where the "underlying insurance" also contains awaiver ofsuch right ofrecovery.

ALL OTHER TERMS AND CONDITIONS OF THE POLICY REMAIN UNCHANGED. >(P165-0815 Includes copyrighted material cfInsurance Services Office, Inc., Page 1 of 1

Policy Number: EXC4281683
Effective Date: 12/3/2022-12/3/2023
A
This endorsement modifies insurance provided under the following:

SECTION III — CONDITIONS, 8. Other Insurance is amended and the following added:

With the exception of other insurance written specificaHy to be "underlying insurance" to this Policy, this insurance shall be primary and non-contributory as respects to any contract or agreement you have agreed to in writing that this insurance would be primary and would not seek contribution from any other insurance.

All "applicable underlying insurance" must also provide coverage on a primary and non-contributo basis in order for this condition to apply. I
XP293-0815 Includes copyrighted material of Insurance Services Office, Inc., Page 1 of 1 with its permission.

Exhibit 2 845

Policy Number: 7930123040000
Effective Date: 12/312022-1213/2023
Environmental Excess Liability
Coverage Form
tl V 11 R N iIAJ E IN 1' A 11,
THIS POLICY CONTAINS CLAIMS MADE AND REPORTED PROVISIONS.

PLEASE REVIEW THE POLICY THOROUGHLY.

VARIOUS PROVISIONS CONTAINED IN THIS POLICY RESTRICT COVERAGE, READ THE ENTIRE POLICY CAREFULLY TO DETERMINE RIGHTS, DUTIES AND WHAT IIS AND IS NOT COVERED.

VARIOUS PROVISIONS CONTAINED IN THIS POLICY ARE WRITTEN ON A CLAIMS MADE AND REPORTED BASIS. TO BE COVERED UNDER THESE PROVISIONS, A CLAIM OR SUIT MUST BE FIRST

MADE OR BROUGHT AND REPORTED TO THE COMPANY DURING THE POLICY PERIOD, OR DURING AN EXTENDED REPORTING PERIOD, IF APPLICABLE. PLEASE REVIEW THOROUGHLY.

TNs policy is organized into the following sections:

Section
Pao Section
Pao
SECTION I - COVERAGE ........ ....................... ............................ 1 SECTION IV - REPORTING... ..... ............................................... - 7 Throughout this policy the words you and your refer to the Named Insured, and any other person or organization:
qualifying as an insured under this policy. The words we, us and our refer to the company providing this insurance. Other words and phrases that appear in quotation: marks or in bold font have special meaningi. Refer to Section: V - Definitions.

In consideration of the premium paid and in: reliance upon the statements contained in the application and any other supplemental information provided to us, we agree to provide coverage as shown in: the Declarations and as described herein:

SECTION I - COVERAGE

COVERAGE ENVIRONMENTAL EXCESS

1. Insuring Agreement
a. We will pay those sums that the insured becomes legally obligated to pay as damages iin excess of the underlying insurance, but only after all ulnderiyingl Insurance has been exhausted by actual payment in full of all underlying insurance by the issuer of all underlying insurance for a covered claim or suit.
b. This insurance is subject to the same insuring agreements, conditions, exclusions, limitations, definitions, and terms as are contained within any underlying insurance except with respect to any provisions or exclusions to the contrary included in this policy. In no event shall this policy provide broader coverage than would be offered by any underlying insurance.

C. The amount we will pay for damages is limited as described in Section 11 - Limits of Insurance.

OBENIV XS 200 (05 13) Includes copyrighted material of Insurance Services Office, Inc. 11 of 8 Copyright, OneBeacon Insurance Group, 2013
Exhibit 2 846

Policy Number: 7930123040000
Effective Date: 12/3/2022-12/3/2023
d. You must keep records of the information we need for premium computation and send us copies upon request.
e. We may examine and audit your books and records as they relate to this policy at any time during the policy period and up to three years afterward.

10. Representation and Incorporation of the Application By accepting this policy you represent that the particulars and statements contained in the applications, questionnaires and any other materials submitted to us by you or someone acting on your behalf or any underlying insurance are true, accurate and complete and you agree that:
a. This policy is issued and continued in force by us in reliance upon the truth of such representations;
b. Those particulars and statements are based upon, the representations you made to us or any underlying insurance; and
C, Applications, questionnaires and any other materials submitted to us or any underlying insurance are incorporated in and form a part of this pollcy.

In the event of any material untruth, misrepresentation or omission in connection with any of the particulars or statements in the applications, questionnaires and any other materials submitted to us or any underlying insurance, this policy shall be void.
1111. Transfer of Rights of Recovery Against Others To Us If you have rights to recover all or part of any payment we, have made under this policy, those rights, are transferred to us. You must do nothing to impair them. At our request, you will bring suit or transfer those rights to us and help us enforce them. Any recovery Mill be paid first to us until all amounts we, have spent on a claim or suit have been, reimbursed. You expressly waive the right to be made whole by any such! recovery.

12. Inspections and Surveys
a. We have the right to make inspections and surveys at any time, give you reports on: the conditions we find and recommend changes.
b. We are not obligated to make any inspections, surveys, reports or recommendations and any such, actions we do undertake relate only to insurability and the premiums to be charged. We do not make safety inspections. We do not undertake to perform the duty of any person or organization to provide for the, health or safety of workers or the public. And we do not warrant that conditions are safe or healthful or comply with laws, regulations, codes or standards,

13. Extended Reporting Period
When underlying insurance provides coverage on a claims -made basis, we will provide an extended reporting period to the extent the underlying insurance provides an extended reporting period. An additional premium will apply.

SECTION IV — REPORTING

1. Duties In The Event of Claim or Suit or Circumstance a. If, during the policy period, the insured first becomes aware of any circumstance, and the insured exercises a right under any underlying insurance to report that circumstance, then, the insured must also report such circumstance to us as soon: as practicable but lin any event before the expiration date or earlier cancellation, or termination date of this policy. To the extent possible, notice should include:

OBENIV XS 200 (05 13) Includes copyrighted rnateriaI of Insurance Services Office, Inc. 7 of 8 Copyright, OneBeacon Insurance Group, 2013
Exhibit 2 847

Policy Number: 7930123040000
Effective Date: 12/3/2022-12/3/2023
This endorsement modifies coverage provided under the following:

ENVIRONMENTAL EXCESS LIABILITY COVERAGE PART
The following Condition is added to the CONDITIONS Section:

Other Insurance
This insurance is excess over any other valid and collectible insurance, whether primary, excess, contingent or on any other basis, except other insurance written specifically to be excess over this insurance.

However, this insurance will apply before, and will not seek contribution from, any other insurance available to an additional insured under this policy provided that:
a. The additional insured is a named insured under such other linsurance; and b. The Named Insured has agreed in writing in a contract or agreement that this insurance would:
(1) Act primary to any other insurance available to the additional insure,d; and (2) Would not seek contribution from any other insurance available to the additional insured.

All other terms and conditions remain the same.

OBENIV XS 711 (1120) Contains copyrighted material of Insurance Services Office, Inc. with its permission Page 1 of 1 Exhibit 2 848

CITY OF BELL GARDENS

OFFICE OF THE CITY MANAGER

AGENDA REPORT
Item 18.

TO: Honorable Mayor and City Council Members
FROM: Michael B. O'Kelly, City Manager
BY: Bernardo I niguez, Director of Public Works/Facilities Douglas Benash, P.E., City Engineer
SUBJECT: AWARD OF CONSTRUCTION CONTRACT FORTHE VETERANS PARK CITYYARD STORMWATER IMPROVEMENTS (CIP NO.3880)
DATE: November 13, 2023
RECOMMENDATION:

It is staff's recommendation that the City Council:

1. Award a Construction Contract to Deark E & C, Inc. in the amount of $690,430 for the Veterans Park City Yar Stormwater Improvements; C I P No. 3880; and

2. Authorize staff to execute the agreement and approve change orders that may be necessary during construction t cover any unforeseen condition in an amount not to exceed 9.5% of the Construction Contract.

BACKGROUND/DISCUSSION:

On September 13, 2023, the City Council approved the plans and specifications and authorized staff to solicit bids forth Veterans Park City Yard Stormwater Improvements (the "Project"). The Project scope of work consists of furnishing materials, equipment, tools, labor, and incidentals, as required by the plans, specifications, and contract documents t construct a new trash container ramp and pit to allow direct loading into the trash bins, modifications and improvements t the material storage bins, construction of an underground stormwater storage and treatment device, pavemer improvements, and general maintenance to the Veterans Park City Yard. A canopy/shade structure over the materi; storage bins was included as an additive bid item to be considered based on the bid amounts received and availabl funding.

The Project was advertised for bids on September 21, 2023, and bids were publicly opened on October 9, 2023. Th City received a total of four (4) bid proposals for the Project, as illustrated below:

Bidders
Base Bid Amount
Additive Bid #1
Deark E & C, Inc.
$590,430
$100,000
Leonida Builders, Inc.
$615,182
$99,000
Zusser Company Inc.
$862,410
$100,000
Onyx Paving Company, Inc.
1 $1,396,000
1$200,000
Staff conducted an analysis of the apparent lowest bidder, Deark E & C, Inc. ("Deark"). This analysis included a revie, of their bid schedule, bid bond, license, references, and all required documentation. Deark's license is current and activ( and reference checks revealed that the contractor's previous projects were completed satisfactorily, with no contracto initiated change orders. The Contractor's Department of Industrial Relations (D I R) Registration was also reviewed an deemed satisfactory. It has been determined that Deark is the lowest responsive and responsible bidder. Therefore, sta recommends award of a construction contract to Deark for the base bid amount of $590,430 plus additive bid item no. 849

for an amount of $100,000, for a total contract amount of $690,430. Deark will have fifty-five (55) working days complete the Project after the issuance of the Notice to Proceed.

ENVIRONMENTAL ANALYSIS:

Pursuant to the California Environmental Quality Act (CEQA) (Public Resources Code §§ 21000, et seq.) and CEQ, Guidelines (California Code of Regulations, Title 14, §§ 15000, et seq.), the City conducted an environment; assessment. Based on the environmental assessment, the Project was determined to be categorically exempt pursuar to CEQA Guidelines § 15303 (Class 1 — Existing Facilities). A Notice of Exemption for the Project was prepared an filed with the L.A. County Registrar -Recorder's Office.

CONCLUSION:

If the Construction Contract is awarded, staff will process the contract for signatures and coordinate a pre -construction meeting.

FISCAL IMPACT:

A total of $39,642 in Measure W funds have been expended on the Project in previous fiscal years. The City's FY 23-2 CI P budget includes $877,551 in Measure W funds for the Project. There are sufficient budgeted Measure W funds t cover the total estimated Project cost.

The estimated total project expenditures are as follows:

Design (8%) Based on Construction Estimate
$63,121
Geotechnical Work
N/A
Survey Work
N/A
Project Management (4%)
$31,560
Construction Management & Inspection (7%)
$55,231
Funding Administration (1.5%)
$11,835
Construction Cost — Base Bid
$590,430
Construction Cost —Additive Bid 1
$100,000
Labor Compliance (actual cost)
N/A
Contingency (9.5%)
$62,138
Publication & Misc. Costs
$1,150

TOTAL ESTIMATED PROJECT COST
$915,465
ATTACHMENTS:

Exhibit 1 - Construction Contract
APPROVED ELECTRONICALLY BY:

Michael B. O'Kelly, City Manager
Stephanie Vasquez, City Attorney and/or Susie Altamirano, Assistant City Attorney Manuel Carrillo, Director of Finance and Administrative Services 850

CITY OF BELL GARDENS

CONSTRUCTION CONTRACT AGREEMENT
FOR

VETERANS PARK CITY YARD STORMWATER IMPROVEMENTS
CIP NO. 3880

IN THE CITY OF BELL GARDENS
THIS CONSTRUCTION CONTRACT (hereinafter, "Contract") is made and entered into this day of 1 2023 (hereinafter, the "Effective Date") by and between the CITY OF BELL GARDENS, a municipal corporation (hereinafter, "CITY") and DEARK E & C, INC. (hereinafter, "CONTRACTOR"). For the purposes of this Agreement, CITY and CONTRACTOR may be referred to collectively by the capitalized term "Parties." The capitalized term "Party" may refer to CITY or CONTRACTOR interchangeably as appropriate.

RECITALS
WHEREAS, CITY requires public works construction services for Veterans Park City Yard Stormwater Improvements, C.I.P. No. 3880 (hereinafter, the "Project"); and WHEREAS, CITY issued notice inviting competitive bids for the Project on September 13, 2023; and
WHEREAS, following the opening of bids on October 9, 2023, CONTRACTOR was determined to be the lowest responsive and responsible bidder for the Project.

NOW, THEREFORE, for and in consideration of the mutual covenants and conditions herein contained, CITY and CONTRACTOR agree as follows:

ARTICLE I (CONTRACT DOCUMENTS)
The contract documents for the aforesaid Project shall consist of the Notice Inviting Sealed Bids, Bidder Information, Instructions to Bidders, Proposal, General Specifications, Standard Specifications, Special Provisions, Plans, and all referenced specifications, details, standard drawings, and appendices; together with this Contract and all required bonds, insurance certificates, permits, notices, and affidavits; and also including any and all addenda or supplemental agreements (hereinafter "Contract Documents") clarifying, or extending the work contemplated as may be required to ensure its completion in an acceptable manner. All of the provisions of said contract documents are made a part hereof as though fully set forth herein.

Exhibit 1 851

ARTICLE II (WORK TO BE PERFORMED
CONTRACTOR agrees to furnish all tools, equipment, apparatus, facilities, labor, transportation, and material necessary to perform and complete in a good and workmanlike manner the Project, as called for, and in the manner designated in, and in strict conformity with, the Contract Documents. It is understood and agreed that the tools, equipment, apparatus, facilities, labor, transportation, and material shall be furnished and the work performed and completed as required in the Drawings and Specifications under the sole direction and control of the CONTRACTOR, and subject to inspection and approval of the CITY, or its representatives.

ARTICLE III (CONTRACT PRICE)
CITY agrees to pay and the CONTRACTOR agrees to accept, in full payment for the work above agreed to be done, the sum of SIX HUNDRED NINETY THOUSAND FOUR HUNDRED THIRTY DOLLARS ($690,430) for the Project (hereinafter, the "Bid Price").

CONTRACTOR agrees to receive and accept the prices set forth in the Proposal as full compensation for furnishing all materials, performing all work, and fulfilling all obligations hereunder. Said compensation shall cover all expenses, losses, damages, and consequences arising out of the nature of the work during its progress or prior to its acceptance, including those for well and faithfully completing the work and the whole thereof in the manner and time specified in the aforesaid contract documents; and also including those arising from actions of the elements, unforeseen difficulties or obstructions encountered in the prosecution of the work, suspension or discontinuance of the work, and all other unknowns or risks of any description connected with the work.

As authorized by the City Council at its Regular Meeting of November 13, 2023, and subject to any applicable restrictions set forth under the Bell Gardens Municipal Code as the same may be amended from time to time or applicable State law, CITY, in its sole and absolute discretion, may authorize expenditures in excess of the Bid Price without further City Council approval provided such additional expenditures do not cumulatively exceed an amount equal to nine and a half percent (9.5%) of the Bid Price. Any such additional expenditures must be approved by the City Manager in writing before they may be incurred.

ARTICLE IV (NOTICE AND SERVICE THEREOF)
Any notice from one party to the other under the Contract shall be in writing and shall be dated and signed by the party giving such notice or by a duly authorized representative of such party. Any such notice shall not be effective for any purpose whatsoever unless served in the following manner, namely:
(a) If the notice is given to the CITY, by personal delivery thereof, or by depositing the same in the United States mail, enclosed in a sealed envelope, postage prepaid, and certified; addressed to the CITY at:

Exhibit 1 852

City of Bell Gardens
Public Works Department
Attn: Director of Public Works/Facilities
Bell Gardens City Hall
7100 Garfield Avenue
Bell Gardens, CA 90201
(b) If the notice is given to the CONTRACTOR, by personal delivery thereof to said CONTRACTOR or to its duly authorized representative at the site of the Project, or by depositing the same in the United States mail, enclosed in a sealed envelope, postage prepaid, and certified; addressed to the CONTRACTOR at:

Deark E & C, Inc.
1335 W. Valencia Dr., Ste. P
Fullerton, CA 92833
Attn: Dong K. Kin, President
Phone: (714) 519-3484
(c) If the notice is given to the surety or any other person, by personal delivery to such surety or other person, or by depositing the same in the United States mail, enclosed in a sealed envelope, addressed to such surety or other person, as the case may be, at the address of such surety or person last communicated by it to the party giving the notice, postage prepaid and certified.

ARTICLE V (INSURANCE
CONTRACTOR acknowledges the provisions of the State Labor Code requiring every employer to be insured against liability for worker's compensations, or to undertake self- insurance in accordance with the provisions of that code and certified compliance with such provisions.

CONTRACTOR agrees to indemnify, defend and hold harmless CITY and all if its officers and agents from any claims, demand or causes of action, including related expenses, attorney's fees, and costs, based on, arising out of, or in any way related to the work undertaken by CONTRACTOR hereunder. The liability insurance coverage values shall be:

Insurance Coverage Requirements
Comprehensive General Liability
Product/Completed Operations Hazard
Comprehensive Automobile Liability
Contractual General Liability
Worker's Compensation
Limit Requirements
$1,000,000
$1,000,000
$1,000,000
$1,000,000
Statute
Exhibit 1 853

A combined single -limit policy with aggregated limits in the amount of $2,000,000 will be considered equivalent to the required minimum limits.

The issuer shall be an "admitted surety insurer" duly authorized to transact business under the laws of the State of California.

Acceptable insurance coverage shall be placed with the carriers admitted to write insurance in California or carriers with a rating of or equivalent to A:VIII by A.M. Best & Co. Any deviation from this rule shall require specific approval, in writing, from the CITY.

Insurance shall name the CITY and CITY's elected and appointed officials, officers, employees, agents and volunteers as additional. A copy of the endorsement, showing policy limits, shall be provided to the CITY on or before signing this contract.

ARTICLE VI (EXECUTION)
CONTRACTOR affirms that the signatures, titles and seals set forth hereinafter in execution of this Contract Agreement represent all individuals, firm members, partners, joint ventures, and/or corporate officers having principal interest herein.

ARTICLE VII (COMPLETION DATE)
The total time for completion of this Project is fifty-five (55) working days from the effective date of notice to proceed to be issued by the CITY.

The liquidated damage for this Project is two hundred fifty dollars ($250) per calendar day for each calendar day the Project is not completed to the satisfaction of the CITY within the contract time including any extension of time granted by the CITY.

ARTICLE VIII (RECORDS & AUDITS
The CONTRACTOR shall maintain accounts and records, including personnel, property, and financial records, adequate to identify and account for all costs pertaining to the contract and such other records as may be deemed necessary by the CITY to assure proper accounting for all project funds. These records will be made available for audit purposes to the CITY or any authorized representative and will be retained for 5 years after the expiration of this contract unless permission to destroy them is granted by the CITY.

ARTICLE IX (PREVAILING WAGES)
(a) CONTRACTOR agrees to comply with the provisions of California Labor Code Section 1773.8, which requires the payment of travel and subsistence payments to each worker needed to execute the work to the extent required by law.

Exhibit 1 854

(b) By the execution of this Contract, CONTRACTOR hereby certifies that it is registered with the California Department of Industrial Relations as required pursuant to Labor Code section 1725.5 (contractor registration).
(c) CONTRACTOR agrees to comply with the provisions of California Labor Code Section 1774 and 1775 concerning the payment of prevailing rates of wages to workers and the penalties for failure to pay prevailing wages. The CONTRACTOR shall, as a penalty to the CITY, forfeit no more than fifty dollars ($50) for each calendar day, or portion thereof, for each worker paid less than the prevailing rates as determined by the Director of Industrial Relations for the work or craft in which the worker is employed for any public work done under the contract by CONTRACTOR or by a subcontractor. (d) CONTRACTOR agrees to comply with the provisions of California Labor Code Section 1776 which requires CONTRACTOR and each subcontractor to (i) keep accurate payroll records, (ii) certify and make such payroll records available for inspection as provided by Section 1776, and (iii) inform the CITY of the location of the records. The CONTRACTOR is responsible for compliance with Section 1776 by itself and all of its subcontractors.
(e) CONTRACTOR agrees to comply with the provisions of California Labor Code Section 1777.5 concerning the employment of apprentices on public works projects, and further agrees that the CONTRACTOR is responsible for compliance with Section 1777.5 by itself and all of its subcontractors.
(f) CONTRACTOR agrees to comply with the provisions of California Labor Code Section 1813 concerning penalties for workers who work excess hours without approval of the CITY. The CONTRACTOR shall, as a penalty to the CITY, forfeit twenty- five dollar ($25) for each worker employed in the execution of the contract by the CONTRACTOR or by any subcontractor for each calendar day or portion thereof during which such worker is required or permitted to work more than 8 hours in any one calendar day and 40 hours in any one calendar week in violation of the provisions of Division 2, Part 7, Chapter 1, Article 3 of the California Labor Code. The CONTRACTOR may, with the approval of the Director of Public Works/Facilities, or their designee, use his employees to carry out work on the Project beyond the normal eight (8) hour workday and on Saturdays, Sundays and Holidays provided the employees are paid at the following hourly rates:
• Week days (Monday through Fridays) after eight (8) hours daily and not to exceed twelve (12) hours daily total per day and not exceeding forty- eight (48) hours work in a seven (7) day period week at one and one- half (1.5) times the prevailing hourly wage for the initial eight (8) hours of regular work time for the time worked after the initial eight (8) hours regular time.
• Saturdays, Sundays and Holidays for time worked after forty (40) hours of regular work time in a seven (7) day period week at the rate of two Exhibit 1 855

(2.0) times the prevailing hourly wage for the initial eight (8) hours of regular weekday work time and not to exceed a total of forty-eight (48) hours of work within the seven (7) day work week period. (g) California Labor Code Sections 1860 and 3700 provide that every contractor will be required to secure the payment of compensation to its employees. In accordance with the provisions of California Labor Code Section 1861, Contractor hereby certifies as follows:
"I am aware of the provisions of Section 3700 of the Labor Code which require every employer to be insured against liability for worker's compensation or to under self-insurance in accordance with the provisions of that Code, and I will comply with such provisions before commencing the performance of the work of this contract."

ARTICLE X (PROMPT PAYMENT)
Prompt Progress Payment to Subcontractors
Attention is directed to Section 7108.5 of the California Business and Professions Code, which requires a prime contractor or subcontractor to pay any subcontractor not later than 10 days of receipt by the Contractor of each progress payment, unless otherwise agreed to in writing.
(SIGNATURES ON NEXT PAGE)
Exhibit 1 856

IN WITNESS THEREOF the parties hereto for themselves, their heirs, executors, administrators, successors, and assigns do hereby agree to the full performance of the covenants herein contained and have caused this Construction Contract to be executed in triplicate by setting hereunto their names, titles, hands, and seals this day of , 20
Contractor:
(Signature)
Name and Title (Printed)
CONTRACTOR'S License No.

CONTRACTOR Business License No.

Federal Tax Identification No.

Subscribed and sworn to this day of

NOTARY PUBLIC
CITY -
Attested -
Date
Approved as
to form:

Date
City Manager
City Clerk
City Attorney
License Class
, 20
Exhibit 1 857

FAITHFUL PERFORMANCE BOND
FOR

VETERANS PARK CITY YARD STORMWATER IMPROVEMENTS
CIP NO. 3880
The CITY OF BELL GARDENS, hereinafter "City," entered into a Contract dated , 20 with
work described as follows:
hereinafter Contractor," for the
Veterans Park City Yard Stormwater Improvements — CIP No. 3880 WHEREAS, said Contractor is required under terms of said Contract to furnish a bond for the faithful performance of said Contract; and
WHEREAS, the Contract is by reference made a part hereof.

NOW, THEREFORE, we,
Contractor, as Principal, and
the undersigned
[corporate surety]
corporation organized and existing under the laws of the State of duly authorized to transact business under the laws of the State of California, are held and firmly bound unto the City in the penal sum of ,a
and
as Surety,
, lawful money of the United States, said sum being not less than one hundred percent (100%) of the total Contract amount, for the payment of which sum be made, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally, firmly by these presents.

THE CONDITION OF THIS OBLIGATION IS SUCH, THAT, if the above -bounded Contractor, its heirs, executors, administrators, successors or assigns, shall in all things stand to and abide by, and perform the covenants, conditions, and agreements in said Contract and any alterations thereof made as therein provided, on its part, to be kept and performed at the time and in the manner therein specified, and in all respects according to their true intent and meaning, and shall indemnify and save harmless the City, its officers and agents, as therein stipulated, then this obligation shall become null and void; otherwise it shall be and remain in full force and virtue.

As a condition precedent to the satisfactory completion of said Contract, the above obligation in said amount shall hold good for a period of one (1) year after the completion and acceptance of said work, during which time if the above -bounded Contractor, its heirs, executors, administrators, successors or assigns shall fail to make full, complete, and satisfactory repair and replacements or totally protect the City from loss or damage made evident during said period of one (1) year from the date of acceptance of said work, Exhibit 1 858

and resulting from or caused by defective materials or faulty workmanship in the prosecution of the work done, the above obligation in said sum shall remain in full force and effect. However, anything in this paragraph to the contrary notwithstanding, the obligation of the Surety hereunder shall continue so long as any obligation of the Contractor remains.

And the Surety, for value received, hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the Contract or to the work to be performed thereunder or the specifications accompanying the same shall, in any way, affect its obligations on this bond and it does hereby waive notice of any such change, extension of time, alteration, or addition to the terms of the Contract or to the work or the specifications. Said Surety hereby waives the provisions of Sections 2819 and 2845 of the Civil Code of the State of California.

In the event suit is brought upon this bond by the City and judgment is recovered, the Surety shall pay all costs incurred by the City in such suit, including reasonable attorneys' fees to be fixed by the Court.

IN WITNESS WHEREOF, we have hereunto set our hands and seals this day of , 20
(Seal)
(Seal)
In
(Contractor as Principal)
NOTE: If Contractor is a Partnership, all parties must execute the Bond.

IMPORTANT: Surety companies executing Bonds must appear on the Treasury Department's most current list (Circular 570 as amended) and be authorized to transact business in California.

Exhibit 1 859

LABOR AND MATERIALS BOND
FOR

VETERANS PARK CITY YARD STORMWATER IMPROVEMENTS
CIP NO. 3880
The CITY OF BELL GARDENS, hereinafter "City," has awarded to ,hereinafter "Contractor," a Contract for the work described as follows:

Veterans Park City Yard Stormwater Improvements — CIP No. 3880 WHEREAS, the Contractor is required by the Contract and by the provisions of Third Division, Part 4, Title 15, Chapter 7 of the Civil Code to furnish a bond in connection with the Contract, as hereinafter set forth.

NOW, THEREFORE, we,
Contractor, as Principal, and
organized and existing under the laws of the State of
the undersigned
a corporation
duly
authorized to transact business under the laws of the State of California, as Surety, are held and firmly bound unto the
in the sum of
), said
sum being not less than one hundred (100%) percent of the total Contract amount payable by the City, under the terms of the Contract, for which payment well and truly to be made, we bind ourselves, our heirs, executors and administrators, successors and assigns, jointly and severally, firmly by these presents.

THE CONDITION OF THIS OBLIGATION IS SUCH, THAT, if the Contractor, its heirs, executors, administrators, successors, and assigns or subcontractors shall fail to pay for any materials, provisions, provender or other supplies or teams, implements or machinery used in, upon, for or about the performance of the work contracted to be done, or shall fail to pay for any work or labor thereon of any kind, or shall fail to pay any persons named in Civil Code section 9100, or shall fail to pay for amounts due under the Unemployment Insurance Code with respect to such work or labor thereon of any kind, or shall fail to pay for any amounts required to be deducted, withheld, and paid over to the Employment Development Department from the wages of employees of the Contractor and subcontractors pursuant to Section 13020 of the Unemployment Insurance Code with respect to such work or labor, and provided that the claimant shall have complied with the provisions of that code, the Surety or Sureties hereon will pay for the same in an amount not exceeding the sum specified in the Contract; otherwise, the above obligation shall be Exhibit 1 860

void. In case suit is brought upon this bond, the Surety will pay reasonable attorneys' fees to the prevailing party to be fixed by the court.

This bond shall insure to the benefit of any and all persons, companies and corporations entitled to file claims under Section 9100 of the Civil Code, so as to give a right of action to them or to their assigns in any suit brought upon this bond.

It is further stipulated that the Surety of this bond shall not be exonerated or released from the obligation of the bond by any change, extension of time for performance, addition, alteration, or modification in, to, or of any contract, plans, specifications, or agreement pertaining or relating to any scheme or work of improvement described above or pertaining or relating to the furnishing of labor, materials, or equipment therefor, nor by any change or modification of any terms of payment or extension of the time for any payment pertaining or relating to any scheme or work of improvement described above, nor by any rescission or attempted rescission of the Contract, agreement, or bond, nor by any conditions precedent or subsequent in the bond attempting to limit the right of recovery of claimants otherwise entitled to recover under any such contract or agreement or under the bond, nor by any fraud practiced by any person other than the claimant seeking to recover on the bond, and that this bond be construed most strongly against the Surety and in favor of all persons for whose benefit such bond is given, and under no circumstances shall Surety be released from liability to those for whose benefit such bond has been given, by reason of any breach of contract between the City and original contractor or on the party of the obligee named in such bond, but the sole conditions of recovery shall be that claimant is a person described in Sections 8400 and 8402 of the California Civil Code and has not been paid the full amount of its claim and that Surety does hereby waive notice of any such change, extension of time, addition, alteration, or modification.

IN WITNESS WHEREOF, we have hereunto set our hands and seals this day of , 20
(Contractor as Principal)
(Seal)
(Seal) By
NOTE: If Contractor is a Partnership, all partners should execute Bond.

IMPORTANT: Surety companies executing Bonds must appear on the Treasury Department's most current list (Circular 570 as amended) and be authorized to transact business in California.

Exhibit 1 861

PROPOSAL
FOR

VETERANS PARK CITY YARD IMPROVEMENTS
C.I.P. NO.3880

IN THE CITY OF BELL GARDENS
TO THE CITY OF BELL GARDENS, as AGENCY
In accordance with AGENCY'S Notice Inviting Sealed Bid, the undersigned BIDDER hereby proposes to furnish all materials, equipment, tools, labor and incidentals required for the above -stated project as set forth in the Plans, Specifications, and contract documents therefor, and to perform all work in the manner and time prescribed therein.

BIDDER declares that this proposal is based upon careful examination of the work site, Plans, Specifications, Instruction to Bidders and all other contract documents. If this proposal is accepted for award, BIDDER agrees to enter into a contract with AGENCY at the unit and/or lump -sum prices set forth in the following Bid Schedule. BIDDER understands that failure to enter into a contract in the manner and time prescribed will result in forfeiture to AGENCY of the guarantee accompanying this proposal.

BIDDER understands that a bid is required for the entire work that the estimated quantities set forth in the Bid Schedule are solely for the purpose of comparing bids and that final compensation under the contract will be based upon the actual quantities of work satisfactorily completed. THE AGENCY RESERVES THE RIGHT TO INCREASE

OR DECREASE THE AMOUNT OF ANY QUANTITY SHOWN AND TO DELETE ANY ITEM FROM THE CONTRACT. It is agreed that the unit and/or lump -sum prices bid include all appurtenant expenses, taxes, royalties, and fees. In the case of discrepancies in the amounts bid, unit prices shall govern over extended amounts, and words shall govern over figures.

If awarded the Contract, the undersigned further agrees that in the event of the BIDDER'S default in executing the required contract and filing the necessary bonds and insurance certificates by the dates stablished by the agency after the AGENCY'S notice of award of contract to the BIDDER, the proceeds of the security accompanying this bid shall become the property of the AGENCY and this bid and the acceptance hereof may, at the AGENCY'S option, be considered null and void.

C-1
Exhibit 1 862

BID SCHEDULE
FOR

VETERANS PARK CITY YARD IMPROVEMENTS
C.I.P. NO.3880

IN THE CITY OF BELL GARDENS

BASE BID SCHEDULE
Item
Description *
Estimated
Unit
Unit
Extended
No.

Quanti
price $
Amount $
1 Traffic Control
1 LS
$diaao
$ O/000
2 Sawcut and Remove Existing Concrete Longitudinal Gutter 250
LF
$ X0
$ /,4'- 000
3 Sawcut and Remove Existing Concrete Pavement, Base,
160
CY
$ >00
$ 3',000
Sub -base and Native Soil 10" Depth)
4 Sawcut and Remove Existing Concrete Pavement, Base,
28 CY
$
$
Sub -base and Native Soil (14' Depth)
_�00
5 Sawcut and Remove Existing Concrete Pavement, Base,
164
CY
$ a00
$ 3�1t?00
Sub -base and Native Soil 7 2 Depth)
B
Sawcut and Remove Existing Concrete Pavement, Base,
15 CY
$
Sub -base and Native Soil 6'4' to 7'-2" Depth)�00
7 Sawcut and Remove Existing AC Pavement, Base, Sub-
229
CY
$ /�0
$ j,0
base and Native Soil (I OP Depth)
8 Sawcut and Remove Existing AC Pavement, Base, Sub-
19 CY
$ Igo
$ 3, �
base and Native Soil 14' Depth)
9 Sawcut and Remove Existing AC Pavement, Base, Sub-
55 CY
$ YSP
$ 8'_)S j
base and Native Soil 14" to 6'-4" Depth)
Sawcut and Remove Existing AC Pavement, Base, Sub-
10 base and Native Soil to Provide Clear Depth for New
132
CY
$ m
$ /g,
Improvements
11 Construct Concrete Longitudinal Gutter
240
LF
$ j00
$ �OOo
12 Construct Reinforced Concrete Retaining Wall
184
LF
$ ,300
$/_:)Oo
13 Furnish and Install New Metal Hand Railing
184
LF
$ /(f0
$
14 Provide and Place 6" Thick Crushed Miscellaneous Base 299
CY
$ %
$ B80
CMB
15 Construct 8"-Thick Concrete Pavement
2,292
SF
$
$
16 Construct 2.5"-Thick AC Base Course B2-PG 64-10
195
TON
$
00 17
Construct 1.5" Thick Conventional AC Overlay Type C2-PG 117
TON
$ _-LID
$
64-10
�7110
18 Furnish and Install Nyloplast 3'X3' Drain Basin Structure or 1 LS
$_x/000
$ _20, on
Approved Equal
C-2
Exhibit 1 863

Item
Description *
Estimated
Unit
Unit
Extended
No.

Quantily
Price $
Amount $
19 Furnish and Install Nyloplast TXT Steel Bar Grate
1 LS
$ 6i40D
$ Opp
AssemblyorA roved Equal
20 Construct 12" Storm Drain and Trenching
111
LF
$ _.pa
$ ��00
21 Construct 18" Storm Drain and Trenching
16 LF
$ &00
$ Yi 000
22 Install 12" NDS Round Grate
1 EA
$ j� 040
$ // DOv
23 Furnish and Install Barracuda Structure with ClearTec 1 LS
$_)k,Opa
$ ,>kl000
Absorbina Material or Approved Equal
24 Furnish and Install ADS MC-4500 Stormtech Chamber
1 EA
$Di4g0
$ �� 0027
S stem or A roved E uai
25 Adjust Existing Water Valve Cans and Covers to Finished 2 EA
$
$ p 000
Grade
ra00
Oi
26 Adjust Existing Water Meter Boxes and Covers to Finished 1 EA
$ 3i OQp
$ 00,0
Grade Replace Broken Cover/Box
,
27 Construction Survey and Staking
1 LS
$
$ ),,,4VD
28 Provide Soil and Pavement Testing Services as needed - 1 LS
$3500
$3500
Allowance
TOTAL AMOUNT BASE BID IN FIGURES:
$ 'W' 00
TOTAL AMOUNT IN WORDS BASE BID:

ADDITIVE BID SCHEDULE
Item
Description *
Estimated
Unit
Unit
Extended
No.

Quantity
Price $
Amount $
29A
Cantilevered Canopy
1 EA
$1a1000
$ /pp/ oo 0
TOTAL AMOUNT BASE BID IN FIGURES:
$ /OQ/ b0 t7
TOTAL AMOUNT IN WORDS ADDITIVE BID:

DOLLARS.

C-3
Exhibit 1 864

�P1r C—LC. TAC
Company Name
Bi er s- Signature

IN CASE OF DISCREPANCY BETWEEN THE WORDS AND FIGURES, THE WORDS SHALL PREVAIL.

All work of this project shall be completed within Fifty-five (55) working days of the effective date of the Notice to Proceed to be issued by AGENCY, including five (5) working days for Mobilization and Fifty (50) working days for Construction.

C-a
Exhibit 1 865

DESIGNATION OF SUBCONTRACTORS
BIDDER proposes to subcontract certain portions of the work that are in excess of one-half of 1 percent of the total amount bid or $10,000, whichever is greater, as follows:

Name:

Address:

Telephone No.:

State License No.:

Portion of Work:

Name: I Ai i�t G
Address:

Telephone No.:

State License No.:

Portion of Work:

Name:

Address:

Telephone No.:

State License No.:

Portion of Work:

Name:

Address:

Telephone No.:

State License No.:

Portion of Work:

Name:

Address:

Telephone No.:

State License No.:

Portion of Work:

Name:

Address:

Telephone No.:

State License No.:

Portion of Work:

Prior to award of contract, Contractor shall submit a list of suppliers and vendors, in writing, to the City Engineer.

C-5
Exhibit 1 866

REFERENCES
The following are the names, addresses, and telephone numbers for three public agencies for which BIDDER had performed similar work within the past 2 years:

1. LL�
Name and
Name and

2. 3.
ress of Owner
number of person familiar with project
Contract amount Type of work
Name and Address of Owner
k� -ai �ehhc , 9-0, PM- 6416
Name and telephone number of person familiar with project R/'01-2r6010. Do
Contract amount
a
and Address of Owner
Name and
amount
Type of work
WMI02 VOY- 0798- �"4/
number of person familiar with project
Date completed
Date
Date
9-��
The following are the names, addresses, and telephone numbers of all brokers and sureties from whom BIDDER intends to procure insurance and bonds:
=.try! Ili 1` /5111111 RawZ
J
I
C-6
Exhibit 1 867

EQUAL EMPLOYMENT OPPORTUNITY COMPLIANCE
BIDDER certifies that in all previous contracts or subcontracts, all reports which may have been due under the requirements of any AGENCY, State or Federal equal employment opportunity orders have been satisfactorily filed, and that no such reports are currently outstanding.

AFFIRMATIVE ACTION CERTIFICATION
BIDDER certifies that affirmative action has been taken to seek out and consider minority business enterprises for those portions of the work to be subcontracted, and that such affirmative actions have been fully documented, that said documentation is open to inspection, and that said affirmative action will remain in effect for the life of any contract awarded hereunder. Furthermore, BIDDER certifies that affirmative action will be taken to meet all equal employment opportunity requirements of the contract documents.

NONCOLLUSION AFFIDAVIT
BIDDER declares that the only persons or parties interested in this proposal as principals are those named herein; that no officer, agent, or employee of the AGENCY is personally interested, directly or indirectly, in this proposal; that this proposal is made without connection to any other individual, firm, or corporation making a bid for the same work and that this proposal is in all respects fair and without collusion or fraud.

C-7
Exhibit 1 868

BIDDER'S INFORMATION
BIDDER certifies that the following information is true and correct:

Bidder's Name C-
Business Address % Ly. VA eflad or, 4�;te� �fuel'-�ayf , � q 833 Telephone '%/q- 1/9— 344,944 _
State Contractor's License No. and Class
Original Date Issued O --) - Expiration Date /D - 3/ - 'h0. 4" The following are the names, titles, addresses, and telephone numbers of all individuals, firm members, partners, joint ventures, and/or corporate officers having a principal interest in this proposal (use additional 8 W x 11" sheets if needed):

The date of any voluntary or involuntary bankruptcy judgments against any principal having an interest in this proposal, or any firm, corporation, partnership or joint venturer of which any principal having an interest in this proposal was an owner, corporate officer, partner or joint venturer are as follows:

All current and prior DBA's, alias, and/or fictitious business names for any principal having an interest in this proposal are as follows:
/V I /q
,off -I
Exhibit 1 869

IN WITNESS WHEREOF, BIDDER executes and submA this proposal with the names, title, hands, and seal of all forenamed principals this �_ day of 20 >:
.3 141. LL4WCr& ' i. i '� ■''
The undersigned declares under penalty of perjury under the laws of the State of California that the representations made hereto are true and correct.

Si nature of Contractor's Representative
Printed Name
Title
Subscribed and sworn to this day of , 20

NOTARY PUBLIC
G9
Exhibit 1 870

CALIFORNIA ALL- PURPOSE

CERTIFICATE OF ACKNOWLEDGMENT
A notary public or other officer completing this certificate verifies only the identity of the individual who signed the document to which this certificate is attached, and not the truthfulness, accuracy, or validity of that document.

State of California
}
County of11--
n before me, ,
personally appeared
who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) islare subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(fes), and that by his/her/their signature(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument.

I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct.

WITNESS my d and official seal. .. JIN Y. GONG {
j N N0490
AR Comm. c3 u UI
°+aoaa* M, COW.
>. juCou�tr202t''
Notary Public S@f15ture (Notatyfublic Seal)

ADDITIONAL OPTIONAL INFORMATION INSTRUCTIONS FOR COMPLETING THIS FORM Thtsform complies with current California staneas regarding norary wordtng and DESCRIPTION OF THE ATTACHED DOCUMENT (needed, should be completed and attached to the document. Admowledpwris from other states may be eompletedfor documents betng sent to that state so long as the wording does not require the California Rotary to violate California notary law.
(Title or deWption of attached document) • State and County information must be the State and County where the document signer(s) personally appeared before the notary public for acknowledgment • Date of notarization must be the date that the signers) personally appeared which (Title or desc4p6lon of enacted document eonfted) must also be the same date the acknowledgment is completed. • The notary public must print his or ha name as it appears within his or her Number of Pages Document Date commission followed by a comma and then your title (notary public). • Print the name(s) of document signer(s) who personally appear at the time of notarization.

CAPACITY CLAIMED BY THE SIGNER • indicate the correct Singular or plural forms by crossing off incorrect forms (i.e. !3 Wshekhey-, is lam) or circling the correct foams. Failure to correctly indicate this ❑ Individual () information may lead to rejection of document recording. ❑ Corporate Officer • The notary seal impression mast be clear and photographically reproducible. hnpression must not cover text or lines. If seat impression smudges, to -seal if a e sufficient arcs permits, otherwise complete a different acknowledgment form. ❑ Partner(s) • Signature of the notary public must match the signature on file with the office of the county clerk.
❑ Attomey-in-Fact -A Additional information is not required but could help to ensure this ❑ Trustee(s) acknowledgment is not misused or attached to a different document Other + Indicate title or type of attached document, number of pages and date. ❑ * Indicate the capacity claimed by the signer. ff the claimed capacity is a corporate officer, indicate the title (LL CEO, CFO, Secretary). 2015 Version www.NoteryClasses.com 800-873-9865 • Securely attach this document to the signed document with aslaple.

Exhibit 1 871

Bond No. CSBA-25145
o`
C.I.P. NO. 3880
KNOW ALL PERSONS BY THESE PRESENTS that Deark E&C, Inc. , as BIDDER, and Merchants Banding Company (Mutual) a
corporation organized and existing under the laws of the Mate of Iowa and duly authorized to transact business under the laws of the State of California, as SURETY, are held and firmly bound unto the City of Bell Gardens„ as AGENCY, in the penal sum of Teri Percent of the Arnount Bid
Dollars
( 10% ) which is ten (10) percent of the total amount bid by BIDDER to AGENCY for the above -stated project„ for the payment of which sum, BIDDER and SURETY agree to be bound, jointly and severally„ firmly by these presents.

THE CONDITIONS OF THIS OBLIGATION ARE SUCH that, whereas BIDDER is about to submit a bid to AGENCY for the above -stated project, if said bid is rejected, or if said bid is accepted and a contract is awarded and entered into by BIDDER in the manner and time specified, then this obligation shall be null and voided, otherwise it shall remain in full force and effect in favor of the AGENCY.

IN WITNESS WHEREOF the parties hereto have set their names, titles, hands, and seals this 6th day of October 2023,
BIDDER" Deark E&C, Inc. 1830 W. 147th St., Gardena, CA 90249, 424 344-2389 6700 Westown Parkway
SURETY* Mercfints Bonding Company (Mutual) West Des Monnes, IA 50266„ (800) 678-8171 Adrian L ngr t Attorney -in -Fact 1411 N. Batavia St., Suite 201, Orange, CA 92867, (714) 516-1232 Subscribed and rn� this day of 20

NOTARY PUBLIC
Provide BIDDER/,ADMITTED SURETY name, address, title and telephone number and the name, title, address, and telephone number of authorized representative.

NIM
Exhibit 1 872

IN
Exhibit 1 873

CALIFORNIA ALL- PURPOSE

State of Califomia
County of 6 5 A2�:5zt-9"5 }
On before me,
e
personally appeared �)o VQ u v% J -)-L ,
who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) istare subscribed to the within instrument and acknowledged to me that helshetthey executed the same in his/her/their authorized capacity(ies), and that by his/her/their signature(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument.

I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct.

WITNESS my hand and official seal. .� NIP IIN Y. GOftG
�' CormA 2330490 t�
p � LOS ANGELES G�O111iF i�Y � y,
�nort�'� ICY Caw. E1IP. IDLY 18, 262t r
Notary Public ig ature (Notary P Uc Seal)

ADDITIONAL OPTIONAL INFORMATION INSTRUCTIONS FOR COMPLETING THIS FORM Thisform complies with current Calffornia statutes regarding notary wording and, DESCRIPTION OF THE ATTACHED DOCUMENT ifweded, should be conOered and attached to the document. Acknowledgments from other states maybe completedfor documents being sent to that state so long as the wounding does not requfrr the Catiforwa notary to violate California notary law.
(fie or description of atiached document) • State and County information must be the State and County where the document signer(s) personally appeared before the notary public for aclmowledgment. • ofihotarization mot be die date that the (Title or desaipton of abched domant eor&ued) mutest also same date the acknowledgment �oompersonally which kted.
• The notary public must print his or her name as it appears within his or her Number of Pages Document Date commission followed by a comma and then your title (notary public). • Print the name(s) of document signer(s) who personally appear at the time of notarization.

CAPACITY CLAIMED BY THE SIGNER • Indicate the correct singular or plural foams by crossing off incorrect farms (i.e. ❑ Individual (s) helshefthey,- is /are) or circling the correct forms. Failure to correctly indicate this information may lead to rejection of documeutrecotding. ❑ Corporate Officer • The notary seal impression must be clear and photographically reproducible.

Impression must not cover text or lines. If seal impression smudges, re -seal if a (Title sufficient area permits, otherwise complete a different acknowledgment farm. ❑ Partner(s) • Signature of the notary public must match the signadre on file with the office of the county clerk.
❑ Attorney -in -Fact 4a Additional information is not requited but could help to ensure this ❑ Trustee(s) acknowledgment is not misused or attached to a different document.

Other 0 Indicate title or type of attached document, number of pages and date. ❑ ,4 Indicate the capacity claimed by the signer. if the claimed capacity is a Corp 11 1 officer, indicate the title (i.e. CEO, CFO, Secrotary) 2015 Version www.Noteryaasses.com WO-873-9866 • Securely attach this document to the signed docmmemtwith a staple.

Exhibit 1 874

A notary public or other officer completing this
certificate verifies only the identity of the individual who signed the document to which this certificate is
attached, and not the truthfulness, accuracy, or
valid of of that document.

State of California
County of Orange
On 10/06/2023 before me, Melissa Ann Vaccaro, Notary Public (insert name and title of the officer)
personally appeared Adrian Langrell I
who proved to me on the basis of satisfactory evidence to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authorized capacity(ies), and that by his/her/their signature(s) on the instrument the person(s), or the entity upon behalf of which the person(s) acted, executed the instrument.

I certify under PENALTY OF PERJURY under the laws of the State of California that the foregoing paragraph is true and correct.

SSA
WITNESS my hand and official sea]. EUAN04 VACCARO
(Seal)Signature
Melissa Ann Vaccaro
Exhibit 1 875

MERCHANTS Bond No. CSBA-25145
BONDING COMPANY..

POWER OF ATTORNEY
Know All Persons By These Presents, that MERCHANTS BONDING COMPANY (MUTUAL) and MERCHANTS NATIONAL BONDING, INC., both being corporations of the State of Iowa, d/b/a Merchants National Indemnity Company (in California only) (herein collectively called the "Companksl do hereby make, constitute and appoint, individually, Adrian Langrell; Arturo Ayala; Ben Stong; Benjamin Wolfe; Chelsea Liberator:; Daniel Huckabay, Dwight Reilly; Frank Morones; Michael D Stong; R Nappi; Shaunna Rozelle Ostrom
their true and lawful Attomey(s)-in-Fad, to sign its name as surety(ies) and to execute, seal and acknowledge any and all bonds, undertakings, contracts and other written instruments in the nature thereof, on behalf of the Companies in their business of guaranteeing the fidelity of persons, guaranteeing the performance rof contracts and executing or guaranteeing bonds and undertakings required or permitted in any actions or proceedings allowed by law.

This Power-of-Attomey is granted and is signed and sealed by facsimile under and by authority of the following By -Laws adopted by the Board of Directors of Merchants Bonding Company (Mutual) on April 23, 2011 and amended August 14, 2015 and adopted by the Board of Directors of Merchants National Bonding, Inc., on October 16, 2015.
"The President, Secretary, Treasurer, or any Assistant Treasurer or any Assistant Secretary or any Vice President shall have power and authority to appoint Attorneys -in -Fad, and to authorize them to execute on behalf of the Company, and attach the seal of the Company thereto, bonds and undertakings, reoognizances, contracts of indemnity and other writings obligatory in the nature thereof." "The signature of any authorized officer and the seal of the Company may be affixed by facsimile or electronic transmission to any Power of Attorney or Certification thereof authorizing the execution and delivery of any bond, undertaking, recognizance, or other suretyship obligations of the Company, and such signature and seal when so used shall have the same force and effect as though manually fixed." In connection with obligations in favor of the Florida Department of Transportation only, it is agreed that the power and aut hority hereby given to the Attomey4n-Fad Includes any and all consents for the release of retained percentages and/or final estimates on engineering and construction contracts required by the State of Florida Department of Transportation. It is fully understood that consenting to the State of Florida Department of Transportation making payment of the final estimate to the Contractor and/or its assignee, shall not relieve this surety company of any of its obligations under its bond.

In connection with obligations in favor of the Kentucky Department of Highways only, it is agreed that the power and authority hereby given to the Attorney -in -Fact cannot be modified or revoked unless prior written personal notice of such intent has been given to the Commissioner - Department of Highways of the Commonwealth of Kentucky at least thirty (30) days prior to the modification or revocation.

In Witness Whereof, the Companies have caused this instrument to be signed and sealed this 61h day of December , 2022 . • • "' • •. MERCHANTS BONDING COMPANY (MUTUAL)
a�a,.Cnjj,�;,• MERCHANTS NATIONAL BONDING, INC.
�O .�QIPOR •.9 dlbla MERCHANTS NATIONAL INDEMNITY COMPANY • a = 1933 ; c: By
.y

42. .'c:•
••6�fy",,1JJ11�.. \1�;% President
STATE OF IOWA 'o••••„xT��••.:� - • •. • . ♦ •, ••
COUNTY OF DALLAS ss.

On this 6th day of December 2022 , before me appeared Larry Taylor, to me personalty known, who being by me duly swom did say that he is President of MERCHANTS BONDING COMPANY (MUTUAL) and MERCHANTS NATIONAL BONDING, INC.; and that the seals affixed to the foregoing instrument are the Corporate Seals of the Companies; and that the said instrument was signed and sealed in behalf of the Companies by authority of their respective Boards of Directors. c
t, lam
A* 14,2D24
K,w*
Notary Public
(Expiration of notary's commission does not invalidate this instrument) I, William Warner, Jr., Secretary of MERCHANTS BONDING COMPANY (MUTUAL) and MERCHANTS NATIONAL BONDING, INC., do hereby certify that the above and foregoing is a true and correct copy of the POWER -OF -ATTORNEY executed by said Companies, which is still in full force and effect and has not been amended or revoked.

In ltness 1Nh&*pjf, Nave hereunto set my hand and affixed the seal of the Companies on this 6th day of October 12023 , G'*P01¢,4 :spy -
�•00S,�sp0,4*P
4•
2003
.0000a
1933 ;:y secretary
'''•'
••••••,•
POA 00 18 (10/22) •••,•••••••
Exhibit 1
876

�r

BIDDER'S VIOLATION OF LAWISAFETY QUESTIONNAIRE
In accordance with Government Code Section 14310.5, the BIDDER small complete, under penalty of perjury, the following questionnaire.

QUESTIONNAIRE
Has the Bidder, any officer of the bidder or any employee of the Bidder who has a proprietary interest in the Bidder ever been disqualified, removed or otherwise prevented from bidding on or completing a Federal, State or local government project because of a violation of law or a safety regulation?
Yes No
If the answer is yes, explain the circumstances in the space provided.

Note: This questionnaire constitutes a part of the Proposal, and a signature portion of the Proposal shall constitute signature of this questionnaire.

C-11
Exhibit 1 878

Project Name: VETERANS PARK CITY YARD IMPROVEMENTS
Project ID: C.I.P No., 3880
R 1 M-7 'Pro 11MR11T,
SOL
Contact: Douglas Benash, PE, QS
Plli 626,2032849
E-Ml: db@i',nfeng;r.com
The following addendum provides the following information to be incorporated into the bid documents per this Addendum.
0, 1W U ilkTr i�ii IF!"I
Attached is the sign in sheet from today's mandatory pre -bid meeting. The attendees noted on the sign in sheet will be the only contractors eligible to submit a bid for the project
Bid, Item No. 12. Please confirm the retaining wall footing orientations. Per Standard Drawings 614-3 the cantilever footings (longer part of the footing) are inside the b!ackfill area on the drawings, the cantilever footings, are inside the storage not in backfill area.

Response: Please use SPP,WC Std Dwg No. 613-4, See Attached Responses to RFI
Exhibit 1 879

Vetarans. Park City Yard Improvements, CIP No 3880
Addendum No. 1

Page 3 ends

Bell Gardens City CouncilOctober 23, 2023

Bell Gardens City Council
October 23, 2023