4 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
MORE REASONS TO CHOOSE A
CAT MOBIL-TRAC™
UNDERCARRIAGE
SMOOTH TRANSITIONS
The Mobil-Trac undercarriage combines a large ground
contact area with oscillating front and rear bogie sets that effortlessly crawl over milled cuts and surface irregularities to help limit tow-point movement and deliver smoother asphalt mats.
DURABLE COMPONENTS
When it comes to durability, rubber-coated components
help shed asphalt and prevent accumulation that can cause premature wear. In addition, self-tensioning accumulators, center guide blocks, and rugged internal belt cables promote lasting durability.
EXCEPTIONAL MOBILITY
INCREASES JOBSITE EFFICIENCY
Mobility is one of the keys to jobsite efficiency, maneuvering in confined areas, backing up to curbs and repositioning at the starting point are real advantages of the Cat® Mobil-Trac™ system.
48-MONTH BELT WARRANTY
HIGH SPEED TRAVEL
OSCILLATING BOGIE DESIGN
SMOOTH RIDE
EXCELLENT TRACTION
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 5
WHEEL UNDERCARRIAGE
The wheel undercarriage combines high travel speeds with mobility and smooth turning capabilities to efficiently move around the jobsite. In addition, front-wheel assist and all-wheel drive options help maintain consistent traction, while the power turning system helps provide steady speeds through curves and turnouts.
MOBILITY AND MANEUVERABILITY
Exceptional mobility and fast travel speeds provide unmatched maneuverability around the jobsite. Additionally, the high ground clearance helps avoid storm drains, curbs, and other obstacles.
FRONT-WHEEL ASSIST
The adjustable front-wheel assist option (AP400, AP500) delivers power to the rear set of bogie wheels for increased traction to push heavy loads and power up inclines.
ALL-WHEEL DRIVE
All-wheel drive option (AP500) utilizes a flow divider that powers both sets of front bogie wheels for optimal tractive effort.
POWER TURNING SYSTEM
The power turning system utilizes a position sensor located in the left steering cylinder that helps maintain consistent travel speeds when making turns. The adjustable design
modifies the drive speed of the propel motors according to the steering angle of the front wheels, leading to better mat quality and less wear on the drive system.
FAST TRAVEL
WITH SMOOTH TURNING PERFORMANCE
ATTACHMENT 8
6 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
Elimination of the exhaust stack and swing out seats, provide good visibility into the hopper and auger chamber to support good material flow.
The AP400 and AP455 utilize a single sliding console, while the AP500 and AP555 are equipped with dual consoles. Both designs provide good visibility for joint matching or when precision next to obstacles is needed.
Eco-mode and Automatic Engine Speed Control combine to optimize engine speed and reduce sound levels, while the on-demand fan offers lower sound levels and draws ambient air from the side of the machine for enhanced cooling capability.
The standard ventilation system draws
air from the conveyor tunnel as well as
the auger chamber and redirects it away
from the operator for a more comfortable
working environment.
PERFORMANCE
BOOSTING
DESIGN ENHANCEMENTS
Operating conditions can have
a direct effect on performance
and quality outcomes.
ENHANCED VISIBILITY, QUIET OPERATION
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 7
SIMILAR
FUNCTIONS
ADDITIONAL
FLEXIBILITY
SHORT-CUT
KEYS
Consistency and familiarity with paver and
screed functions help operators perform
at their best. Whether paving straight-line
rural or urban applications, Cat pavers and
screeds utilize similar functions across the
entire product line that enables personnel
to easily move between crews and train
new members when necessary.
When equipped with Cat Grade Control,
the “AUTO” buttons on the paver console
can activate/deactivate Grade Controls. In
addition, the tow-point adjusters become
target value adjusters enabling easy
modification to existing settings.
High-definition touchscreen displays
utilize simplified menu structures with
short-cut keys that provide single-touch
activation for screed heat, washdown,
and ventilation systems all from the main
menu. As with all Cat pavers, these models
also provide single-touch activation of the
feeder system and hopper fold functions.
FINGER-TIP CONTROL
SIMPLIFIES ADJUSTMENTS
ATTACHMENT 8
8 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
AUTOMATED FUNCTIONS
The versatility of adjustable and automated controls help operators efficiently manage material flow. Adjustable mix height dials assist when nearing obstacles and turnouts, while reversible augers and conveyors help manage material at the end of the pass.
Furthermore, automated functions help provide consistency and fight fatigue when routine conditions exist.
CONSISTENCY DRIVES QUALITY
Consistent material flow is a critical component that can help contractors achieve quality targets. A low truck entry height combines with 355 mm (14”) diameter augers too efficiently move material through the conveyors and auger chamber at both narrow and wide paving widths.
SINGLE-TOUCH ACTIVATION
The single-touch feeder system activates the entire feeder system with a single button push for better efficiency, while auto-fill simplifies starts by alternating the conveyors and augers until the mix height reaches the sensor set point.
SMOOTH MATERIAL FLOW
HELPS INCREASE QUALITY
INDEPENDENT CONTROL
Mix height adjustment from the tractor LCD display offers more control, simply use the touchscreen to modify material height in the auger chamber. The ability to control each material feed sensor independently when utilizing cut-off shoes or when paving at narrow widths is a great feature, simply switch to manual and utilize the proportional control dial to modify material flow.
SIMPLIFIED CLEANOUT
The manual fold front hopper apron on the AP400 and AP455 simplifies cleanout, while the optional power folding apron on the AP500 and AP555 goes a step further to reduce effort.
To make cleanout easier, a cleanout/warmup mode activates the augers and conveyors at slow speed, enabling the
application of release agents to help prevent material
build-up.
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 9
Lower fuel consumption, reduced sound levels, and easier communication are real advantages of the Advanced
Eco-mode system.
ECO-MODE
ADVANCED ECO-MODE
DELIVERS
FROM 20% TO 30% MORE FUEL SAVINGS*
AUTOMATIC ENGINE
SPEED CONTROL
+ Eco-mode utilizes an engine speed of 1650 rpm and is
well-suited for most applications
+ Automatic Engine Speed Control (AESC) reduces engine
speed to 1000 rpm when the propel lever is moved to
neutral, or 1500 if screed heating is active for better overall conditions
+ Advanced Eco-mode combines Eco-mode and Automatic
Engine Speed Control for optimal fuel efficiency. It
increases engine speed to 1650 rpm when the propel
lever moves from neutral and makes modifications
based on engine load. If the upper power threshold is
exceeded, the speed will increase to 2200 rpm until the load drops below the minimum threshold and remains
there for 30 seconds.
INCREASE FUEL SAVINGS
Activate Eco-mode and Automatic Engine
Speed Control for better engine
efficiency and more fuel savings.
+
FUEL EFFICIENT POWER
BALANCES PERFORMANCE
BETTER FUEL ECONOMY
* Fuel savings may vary by paver model, paving conditions and application. Consult your Cat dealer for more information.
ATTACHMENT 8
10 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
The Cat Grade Control option helps deliver smoother surfaces and control mat thickness for increased performance, lower operating costs, and higher profitability. Text-based user-friendly displays, accurate control, and great reliability can help ensure quality targets are being met.
TEXT-BASED DISPLAYS
User-friendly system with text-based displays allow
operation from the paver or screed consoles (screed display required). Split-screen mode enables a single-side operator to monitor settings for each side of the screed.
QUICK ACCESS
The Grade Control activation button enables operators to toggle between Grade Control and the previous screen. Simply press the Grade Control activation button a second time and the system returns to the previous screen.
EASY SETUP
Simple activation of the 10-point auto-calibration helps eliminate over/under adjustment, while cross-coupling
maintains slope and height when height adjustments
are made.
RELIABLE SYSTEM
The highly reliable system utilizes water-resistant displays and sealed components with-stand heat, moisture, and vibration.
The system is compatible with Cat Electronic Technician (Cat ET) for simplified diagnostics.
CAT GRADE CONTROL
OPTIMIZES YIELD AND QUALITY
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 11
The Cat SE47 FM Asphalt Screed features front extenders, multiple berm options, and a small foot print for starting next to curbs and obstacles. The front extenders excel in applications with varying paving widths and enables quick reaction when manuevering around obstacles.
+ Front extenders provide the ability to retract without first clearing material from the extenders, simplifying maneuverability around obstacles
+ Power berm options provide 305 mm (12") or 457 mm (18") wide berms with a variable height up to 102 mm (4")
+ Inner and outer strike-off adjustments are connected
to provide single point modification that ensures equal adjustment across the width of the screed
+ Remote pendents offer mix height adjustments for
complete control from extended positions
The Cat SE47 V Asphalt Screed with rear extenders provides stability, easy set-up, and a versatile paving range. The rear extenders deliver smooth material flow and excellent stability on wide width paving applications.
+ Rear extenders provide effortless material flow to the end gates when increasing paving widths
+ Walkway clearance height of 127 mm (5") enables close starting capability next to curbs and other obstacles
+ Simple, bolt-on extensions offer a maximum paving width of 6.1 m (20')
+ Remote pendents offer mix height adjustments for
complete control from extended positions
ASPHALT SCREEDS
APPLICATION VERSATILITY
Cat Asphalt Screeds come equipped with front or rear extenders that provide high quality results for parking lots, urban streets, and rural roads. The easy-to-use operating consoles and standard remote pendants provide the ability to modify material flow from the screed or remotely. When equipped with Cat Grade Control, conveyor ratio adjustment or conveyor material height can be performed through the displays.
SE47 FM (4B5) ASPHALT SCREED
FRONT-EXTENDER VERSATILITY
SE47 V ASPHALT SCREED
REAR-EXTENDER STABILITY
ATTACHMENT 8
12 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
PARTS AND SERVICE
EXTEND MACHINE LIFE
DOWNLOAD THE PARTS
REFERENCE GUIDE TODAY!
Whether you are a Do-it-myself, Do-it-with-me, or a Do-itfor-me customer, Cat dealers are ready to assist with parts orders to complete rebuilds of your equipment.
DO-IT-MYSELF – If you prefer to do the work in-house, your Cat dealer can help you determine parts needs. One of our experts will utilize Caterpillar Service Information, or can perform a (TA1) visual inspection, or (TA2) technical inspection to help identify parts replacement needs.
DO-IT-WITH-ME – In addition to providing parts, Cat dealers can supplement your repair capabilities with fully trained technicians and specialized tooling.
DO-IT-FOR-ME – Cat dealers can manage the replacement of vital wear parts or a complete rebuild. Ask your dealer about an inspection and a repair option plan to meet your needs.
CERTIFIED PAVER REBUILDS – Take advantage of the extra
value built into Cat equipment. The Cat Certified Rebuild Programs return your end-of-life machines, systems, and components to like-new condition at a fraction of the cost. From single component to complete machine options, we’ve got you covered.
REPAIR WITH GENUINE CAT PARTS
GET FULL ACCESS TO
SERVICE AND REPAIR KITS
The Parts Reference Guide includes diagrams, part descriptions and part number lists for common wear and maintenance
components to make online or in person ordering fast an easy.
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 13
ELIMINATE THE GUESSWORK
Cat equipment management technology helps take the complexity out of managing multiple jobsites – by gathering data generated from equipment, materials, as well as people and serving it up in customizable formats.
CAT EQUIPMENT MANAGEMENT TECHNOLOGY
VISIONLINK®
EQUIPMENT MANAGEMENT
Remote Services* is a suite of technologies that help improve jobsite efficiency.
+ Remote Troubleshoot allows Cat dealers to perform
diagnostic testing and pinpoint potential issues on connected machines while in operation. It can also help ensure that technicians arrive with the correct parts and tools the first time, eliminating additional trips to save time and money. + Remote Flash allows updates to onboard software without a technician being present. Enabling the initiation of software updates when convenient can help increase overall
operating efficiency.
* Must be within cell range coverage.
REMOTE SERVICES
EQUIPMENT MANAGEMENT
Caterpillar releases products, services and technologies in each region at different time intervals. Please verify with your local Cat dealer for technology availability and specifications.
VisionLink® takes the guesswork out of managing entire
fleets regardless of size or equipment manufacturer.* Review equipment data from desktop or mobile devices to maximize uptime and optimize assets. With interactive dashboards, VisionLink makes it easier for operations of all sizes to make informed decisions that lower costs and boost productivity.
With various subscription-level options, Cat dealers can help determine what’s needed to connect your fleet and help manage your business.
+ 24/7 Fleet Monitoring
+ Mixed Fleet Management
+ Optimize Fleet Utilization
+ Track Assets by Location
+ View Asset Health Status
+ Review Inspection Reports
+ Assign Maintenance Tasks
+ Schedule Downtime
+ Request Service Parts
Orders
+ Download Summary
Reports
ATTACHMENT 8
14 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
POWERTRAIN
Engine Model Cat C3.6
Emissions U.S. EPA Tier 4 Final
Engine Power @ 2200 rpm (ISO 14396-2002) 90 kW 120 hp
Speed – Paving 61 m/min 200 ft/min
Speed – Travel 16 km/hr 10 mph
Tire Size 15.5 R25
AP400 TECHNICAL SPECIFICATIONS
DIMENSIONS
1 Operating Length w/ SE47 V Screed 5784 mm 19'
Shipping Length w/ SE47 V Screed 5523 mm 18' 1"
1 Operating Length w/ SE47 FM Screed 5740 mm 18' 10"
Shipping Length w/ SE47 FM Screed 5505 mm 18' 1"
2 Operating Width (hoppers lowered) 3281 mm 10' 9"
3 Operating Height (beacon) 3252 mm 11'
4 Operating Platform height 1731 mm 5' 8"
5 Transport Height (steering wheel) 2853 mm 9' 4"
6 Transport Width w/ End Gates 2590 mm 8' 6"
7 Truck Entry Width 3161 mm 10' 4"
8 Truck Entry Height (hopper) 544 mm 21"
Truck Entry Height (apron) 498 mm 20"
Ground Clearance 203 mm 8"
9 Hopper Length 1803 mm 5' 11"
10 Axle to Axle (center drive to front idler) 2372 mm 93" Auger Diameter 355 mm 14"
CAPACITIES
Maximum Throughput Capacity 774 Tonnes 853 US Tons
Hopper Capacity 5.8 m3
205 ft3
Fuel Tank 200 L 53 gal
Cooling System 24 L 6.3 gal
Engine Oil 11 L 2.9 gal
Hydraulic Tank 121 L 32 gal
Diesel Exhaust Fluid (DEF) Tank 19 L 5 gal
Washdown Spray Tank 32 L 8.5 gal
MACHINE WEIGHT
Paver Only (shipping) 10 581 kg 23,327 lb
Operating w/ SE47 V Screed 13 510 kg 29,800 lb
Operating w/ SE47 FM Screed 13 618 kg 30,000 lb
Operating weights are approximate and include coolant, lubricants, full fuel tank , 75 kg (165 lb) operator, and grade control components.
PAVING RANGE
SE47 V
Standard Range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.1 m 20'
SE47 FM
Standard range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 5.9 m 19' 6"
8 9
1 10
4 5
3 2
7 6
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 15
8 9
1 10
4 5
3 2
7 6
POWERTRAIN
Engine Model Cat C3.6
Emissions U.S. EPA Tier 4 Final
Engine Power @ 2200 rpm (ISO 14396-2002) 90 kW 120 hp
Speed – Paving 61 m/min 200 ft/min
Speed – Travel 11 km/hr 7 mph
AP455 TECHNICAL SPECIFICATIONS
DIMENSIONS
1 Operating Length w/ SE47 V Screed 5784 mm 19'
Shipping Length w/ SE47 V Screed 5523 mm 18' 1"
1 Operating Length w/ SE47 FM Screed 5740 mm 18' 10"
Shipping Length w/ SE47 FM Screed 5505 mm 18' 1"
2 Operating Width (hoppers lowered) 3281 mm 10' 9"
3 Operating Height (beacon) 3275 mm 10' 9"
4 Operating Platform height 1655 mm 5' 5"
5 Transport Height (steering wheel) 2814 mm 9' 3"
6 Transport Width w/ End Gates 2590 mm 8' 6"
7 Truck Entry Width 3161 mm 10' 4"
8 Truck Entry Height (hopper) 567 mm 22"
Truck Entry Height (apron) 525 mm 21"
Ground Clearance 210 mm 8"
9 Hopper Length 1803 mm 5' 11"
10 Axle to Axle (center drive to front idler) 2533 mm 100" Auger Diameter 355 mm 14"
CAPACITIES
Maximum Throughput Capacity 774 Tonnes 853 US Tons
Hopper Capacity 5.8 m3
205 ft3
Fuel Tank 200 L 53 gal
Cooling System 24 L 6.3 gal
Engine Oil 11 L 2.9 gal
Hydraulic Tank 121 L 32 gal
Diesel Exhaust Fluid (DEF) Tank 19 L 5 gal
Washdown Spray Tank 32 L 8.5 gal
MACHINE WEIGHT
Paver Only (shipping) 11 266 kg 24,837 lb
Operating w/ SE47 V Screed 14 194 kg 31,292 lb
Operating w/ SE47 FM Screed 14 303 kg 31,533 lb
Operating weights are approximate and include coolant, lubricants, full fuel tank , 75 kg (165 lb) operator, and grade control components.
PAVING RANGE
SE47 V
Standard Range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.1 m 20'
SE47 FM
Standard range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 5.9 m 19' 6"
ATTACHMENT 8
16 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
4 5
3 2
7 6
POWERTRAIN
Engine Model Cat C4.4
Emissions U.S. EPA Tier 4 Final
Engine Power @ 2200 rpm (ISO 14396-2002) 110 kW 148 hp
Speed – Paving 61 m/min 200 ft/min
Speed – Travel 16 km/hr 10 mph
Tire Size 17.5 R25
AP500 TECHNICAL SPECIFICATIONS
DIMENSIONS
1 Operating Length w/ SE47 V Screed 5909 mm 19' 4"
Shipping Length w/ SE47 V Screed 5648 mm 18' 6"
1 Operating Length w/ SE47 FM Screed 5865 mm 19' 3"
Shipping Length w/ SE47 FM Screed 5630 mm 18' 6"
2 Operating Width (hoppers lowered) 3281 mm 10' 9"
3 Operating Height (beacon) 3352 mm 11'
4 Operating Platform height 1731 mm 5' 8"
5 Transport Height (steering wheel) 2890 mm 9' 6"
6 Transport Width w/ End Gates 2590 mm 8' 6"
7 Truck Entry Width 3149 mm 10' 4"
8 Truck Entry Height (hopper) 537 mm 21"
Truck Entry Height (apron) 507 mm 20"
Ground Clearance 197 mm 7.8"
9 Hopper Length 1925 mm 6' 4"
10 Axle to Axle (center drive to front idler) 2338 mm 92" Auger Diameter 355 mm 14"
CAPACITIES
Maximum Throughput Capacity 1000 Tonnes 1100 US Tons
Hopper Capacity 6.1 m3
215 ft3
Fuel Tank 200 L 53 gal
Cooling System 24 L 6.3 gal
Engine Oil 9 L 2.4 gal
Hydraulic Tank 121 L 32 gal
Diesel Exhaust Fluid (DEF) Tank 19 L 5 gal
Washdown Spray Tank 32 L 8.5 gal
MACHINE WEIGHT
Paver Only (shipping) 11 481 kg 25,311 lb
Operating w/ SE47 V Screed 14 409 kg 31,772 lb
Operating w/ SE47 FM Screed 14 518 kg 32,012 lb
Operating weights are approximate and include coolant, lubricants, full fuel tank , 75 kg (165 lb) operator, and grade control components.
PAVING RANGE
SE47 V
Standard Range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.1 m 20"
SE47 FM
Standard range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.2 m 20' 6"
8 9
1 10
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 17
8 9
1 10
4 5
3 2
7 6
POWERTRAIN
Engine Model Cat C4.4
Emissions U.S. EPA Tier 4 Final
Engine Power @ 2200 rpm (ISO 14396-2002) 110 kW 148 hp
Speed – Paving 61 m/min 200 ft/min
Speed – Travel 11 km/hr 7 mph
AP555 TECHNICAL SPECIFICATIONS
DIMENSIONS
1 Operating Length w/ SE47 V Screed 5909 mm 19' 4"
Shipping Length w/ SE47 V Screed 5648 mm 18' 6"
1 Operating Length w/ SE47 FM Screed 5865 mm 19' 3"
Shipping Length w/ SE47 FM Screed 5630 mm 18' 6"
2 Operating Width (hoppers lowered) 3281 mm 10' 9"
3 Operating Height (beacon) 3352 mm 11'
4 Operating Platform height 1731 mm 5' 8"
5 Transport Height (steering wheel) 2890 mm 9' 6"
6 Transport Width w/ End Gates 2590 mm 8' 6"
7 Truck Entry Width 3149 mm 10' 4"
8 Truck Entry Height (hopper) 537 mm 21"
Truck Entry Height (apron) 507 mm 20"
Ground Clearance 197 mm 7.8"
9 Hopper Length 1925 mm 6' 4"
10 Axle to Axle (center drive to front idler) 2338 mm 92" Auger Diameter 355 mm 14"
CAPACITIES
Maximum Throughput Capacity 1000 Tonnes 1100 US Tons
Hopper Capacity 6.1 m3
215 ft3
Fuel Tank 200 L 53 gal
Cooling System 24 L 6.3 gal
Engine Oil 9 L 2.4 gal
Hydraulic Tank 121 L 32 gal
Diesel Exhaust Fluid (DEF) Tank 19 L 5 gal
Washdown Spray Tank 32 L 8.5 gal
MACHINE WEIGHT
Paver Only (shipping) 12 244 kg 26,993 lb
Operating w/ SE47 V Screed 15 172 kg 33,448 lb
Operating w/ SE47 FM Screed 15 281 kg 33,689 lb
Operating weights are approximate and include coolant, lubricants, full fuel tank , 75 kg (165 lb) operator, and grade control components.
PAVING RANGE
SE47 V
Standard Range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.1 m 20'
SE47 FM
Standard range 2.4 m - 4.7 m 8' - 15' 6"
Maximum Width w/ Extensions 6.2 m 20' 6"
ATTACHMENT 8
18 AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS
OPERATOR ENVIRONMENT STANDARD OPTIONAL
Canopy
Deceleration Pedal
Dual operating consoles (AP500)
Heated Seat
Single Sliding Console (AP400)
Steering Guide
Umbrella – tractor or screed
Ventilation System
Side Shields
Windshield – requires canopy
MATERIAL DELIVERY STANDARD OPTIONAL
Auger Extensions – 0.15 m (6")
Auger Extensions – 0.46 m (1.5')
Mainframe Extensions – power
Mainframe Extensions – manual
Material Feed Sensors – contact
Material Feed Sensors – sonic
Push-roller – adjustable
Truck Hitch
Wash-down Pump and Reel
AP400 / AP500 STANDARD & OPTIONAL EQUIPMENT
Standard and optional equipment may vary. Consult your Cat dealer for details.
TECHNOLOGY STANDARD OPTIONAL
Cat® Grade Control
Basic Grade Control
Product Link™ Elite 643 (cellular)
Product Link Elite 683 (cellular/satellite)
POWERTRAIN STANDARD OPTIONAL
All-wheel Drive (AP500)
Ballast – front weights
Cat C3.6 – four-cylinder (AP400)
Cat C4.4 – four-cylinder (AP500)
Cooling Fan – variable speed
Front-wheel Assist
Radial Drive Tires
Sand-rib Drive Tires
ELECTRICAL SYSTEM STANDARD OPTIONAL
1400 CCA Battery
150-amp Alternator
12-volt Charging System
Automotive-type Fuse System
Auto-reset Breaker for Material Sensors
Battery – maintenance-free
Cat Electronic Technician (Cat ET)
SAFETY AND SECURITY STANDARD OPTIONAL
Alarm – back-up
Horn – warning (front and rear)
Lights – LED Working
Lights – LED Roading
Mirror Package
Warning Beacon – LED
SERVICE AND MAINTENANCE STANDARD OPTIONAL
Hydraulic Oil – Cat HYDO™ Advanced
Remote Access Drains
Remote Flash
Service Repair Kits
Sampling Ports for Scheduled Oil Sampling
(S·O·SSM)
Sight Gauges – engine coolant, hydraulic oil
ATTACHMENT 8
AP400 | AP455 | AP500 | AP555 ASPHALT PAVERS 19
OPERATOR ENVIRONMENT STANDARD OPTIONAL
Canopy
Deceleration Pedal
Dual operating consoles (AP555)
Heated Seat
Single Sliding Console (AP455)
Steering Guide
Steering – friction
Steering – spring return
Umbrella – tractor or screed
Ventilation System
Side Shields
Windshield – requires canopy
MATERIAL DELIVERY STANDARD OPTIONAL
Auger Extensions – 0.15 m (6")
Auger Extensions – 0.46 m (1.5')
Mainframe Extensions – power
Mainframe Extensions – manual
Material Feed Sensors – contact
Material Feed Sensors – sonic
Push-roller – adjustable
Truck Hitch
Wash-down Pump and Reel
AP455 / AP555 STANDARD & OPTIONAL EQUIPMENT
Standard and optional equipment may vary. Consult your Cat dealer for details.
TECHNOLOGY STANDARD OPTIONAL
Cat Grade Control
Basic Grade Control
Product Link™ Elite 643 (cellular)
Product Link Elite 683 (cellular/satellite)
POWERTRAIN STANDARD OPTIONAL
Ballast – front weights
Cat C3.6 – four-cylinder (AP455)
Cat C4.4 – four-cylinder (AP555)
Cooling Fan – variable speed
Mobil-trac belt™ – smooth belt
ELECTRICAL SYSTEM STANDARD OPTIONAL
1400 CCA Battery
150-amp Alternator
12-volt Charging System
Automotive-type Fuse System
Auto-reset Breaker for Material Sensors
Battery – maintenance-free
Cat Electronic Technician (Cat ET)
Remote start charge receptacle (AP455)
SAFETY AND SECURITY STANDARD OPTIONAL
Alarm – back-up
Horn – warning (front and rear)
Lights – LED Working
Lights – LED Roading
Mirror Package
Warning Beacon – LED
SERVICE AND MAINTENANCE STANDARD OPTIONAL
Hydraulic Oil – Cat HYDO™ Advanced
Remote Access Drains
Remote Flash
Service Repair Kits
Sampling Ports for Scheduled Oil Sampling
(S·O·SSM)
Sight Gauges – engine coolant, hydraulic oil
ATTACHMENT 8
The Cat® CW16 is a standard 9-wheel pneumatic roller with an option to increase to 11 wheels. Equipped with an efficient Cat engine, this machine delivers smooth, reliable compaction performance on asphalt and soft base materials.
n Exceptional Visibility and Control with a rotating operating station, LCD display and touch-pad machine functions. ROPS or Sun Canopy options are available.
n Smooth Operating Powertrain with Eco-mode, electronic propel control and smooth braking system. An exclusive two-speed hydrostatic propel system delivers excellent maneuverability with speeds up to 19 km/hr (12 mph). The system shifts smoothly between speed ranges while also providing the ability to coast for a fuel saving enhancement.
n Versatile Compaction Performance is offered by the flexible ballast options, and oscillating front wheels. Ballast options include steel, sand, and water, making it easy to adjust operating weights and match job site requirements. Oscillating front wheels deliver compaction across the entire machine width for excellent results.
n Pickup Prevention provided by the pressurized water spray system, wheel scrapers or cocoa mats, and optional heat retention aprons help keep asphalt and aggregates on the road surface where they belong. n Best Lifetime Value delivered through Eco-mode, efficient engine, and exclusive propel control minimize life-time operating costs and maximize profit.
Top Features
Specifications
Operating Weights Load per Wheel
CW16 w/Standard 9 Wheels
Base machine 5200 kg 11,464 lb 0.58 mt
w/Water 8700 kg 19,180 lb 0.97 mt
w/Wet Sand 12 200 kg 26,896 lb 1.36 mt
w/Steel 8500 kg 18,739 lb 0.94 mt
w/Steel and Water 11 750 kg 25,904 lb 1.31 mt
w/Steel and Wet Sand 15 000 kg 33,069 lb 1.67 mt
CW16 w/11 Wheel Option
Base machine 5300 kg 11,685 lb 0.48 mt
w/Water 8800 kg 19,400 lb 0.80 mt
w/Wet Sand 12 300 kg 27,117 lb 1.11 mt
w/Steel 8600 kg 18,960 lb 0.78 mt
w/Steel and Water 11 750 kg 25,904 lb 1.06 mt
w/Steel and Wet Sand 14 900 kg 32,849 lb 1.35 mt
Cat® C3.4B Engine* 75 kW 101.9 hp (M) 100.5 hp (I)
* Engine meets U.S. EPA Tier 4 Final and EU Stage IV emissions * Turbo-charged
Number of cylinders 4
Rated speed 2200 rpm
Cat C4.4 Engine** 75 kW 101.9 hp (M) 100.5 hp (I)
** Engine meets emissions equivalent to U.S. EPA Tier 3, EU Stage IIIA, and China Stage III.
Number of cylinders 4
Rated speed 2200 rpm
Travel Speed Ranges:
low 0 - 9 km/hr 6 mph
high 0 - 19 km/hr 12 mph
CW16 w/C3.4B Engine
Fuel tank 135 L 35.7 gal
DEF tank 19 L 5 gal
Cooling system 16.6 L 4.4 gal
Engine oil w/filter 6.5 L 1.7 gal
Hydraulic tank 31.9 L 8.4 gal
Water tank 348 L 92 gal
CW16 w/C4.4 Engine
Fuel tank 146 L 38 gal
Cooling system 18.3 L 4.8 gal
Engine oil w/filter 9.5 L 2.5 gal
Hydraulic tank 31.9 L 8.4 gal
Water tank 348 L 92 gal
Weights Service Refill Capacities
Engine – Powertrain
Cat®
CW16
Pneumatic Tire Roller
ATTACHMENT 9
Weight per Wheel
CW16 Pneumatic Compactor
12-Ply
7.5 x 15
Radial Tire
14-Ply
7.5 x 15
Bias Tire
Tire Pressure
kPa 344 413 482 550 619 688 757 344 413 482 550 619 688 757 826 862 psi 50 60 70 80 90 100 110 50 60 70 80 90 100 110 120 125 Average Wheel Load
545 kg
1,200 lb
GCP kPa 236 266 284 306 317 317 344 243 266 284 295 317 330 344 359 367 psi 34 39 41 44 46 46 50 35 39 41 43 46 48 50 52 53
970 kg
2,145 lb
GCP kPa 250 284 314 343 369 378 410 259 295 321 343 369 388 420 421 427 psi 36 41 46 50 54 55 60 38 43 47 50 54 56 60 61 62
1440 kg
3,180 lb
GCP kPa 280 304 331 358 390 405 607 273 312 336 364 390 413 437 465 475 psi 41 44 48 52 57 59 88 40 45 49 53 57 60 64 68 69
5 Dimensions
1 Overall length 4290 mm 14’ 1"
2 Compaction width
9 wheel - Radial 1728 mm 68”
9 wheel - Bias 1754 mm 69”
11 wheel - Radial 2103 mm 83”
11 wheel - Bias 2132 mm 84”
Tire overlap - Radial 32 mm 1.25"
Tire overlap - Bias 36 mm 1.42”
3 Wheelbase 3340 mm 10’ 11"
4 Ground clearance 267 mm 10.5”
5 Height (steering wheel) 2320 mm 91"
6 Height (ROPS) 3000 mm 9' 10"
QEHQ1965-02 (08-2022)
CW16 Pneumatic Tire Roller
4 3
6 2 1
Ground Contact Pressures
For more information on Cat products, dealer services, and industry solutions visit us on the web at www.cat.com. © 2022 Caterpillar
All rights reserved.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment.
See your Cat dealer for available options.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
ATTACHMENT 9
CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS 1
TANDEM VIBRATORY ROLLERS
CB7 | CB8 | CB10 | CB13 | CB15 | CB16
CD8 | CD10
ATTACHMENT 10
2 CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS
TANDEM VIBRATORY ROLLERS
The Cat® line of Tandem Vibratory Rollers offer many technological enhancements that provide better control, more versatility, and increased efficiency:
+ 360º SEAT POSITIONING
+ OSCILLATORY VIBRATION
+ CAT COMPACTION CONTROL
Ready to help you make your business stronger, Cat Tandem Vibratory Rollers give you new ways to get the most work done at the lowest cost—so you put more money in your pocket.
CAT® TANDEM
VIBRATORY ROLLERS
These models deliver excellent mat
densities, good visibility and comfort,
fuel efficiency with Eco-mode, and
unmatched reliability.
RELIABLE. COMFORTABLE. PRODUCTIVE.
ATTACHMENT 10
CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS 3
PASS-COUNT AND
TEMPERATURE MAPPING
Helps ensure the mat gets covered completely
when optimal temperatures exist. It combines
infrared temperature sensors with GPS mapping
to keep the operator informed of current asphalt
temperatures, machine position, pass-count, and
layer coverage.
ELIMINATE CONCERNS
CAT COMPACTION CONTROL
IS HERE TO ASSIST
Traffic, haul trucks, paver stops, night-time operation are genuine concerns when operating an asphalt compactor.
The degree to which these become distractions can have a direct affect on the quality of the pavement. Did every part of the mat receive the same number of passes? Was the asphalt temperature conducive for compaction? Was the base
prepared correctly? Where did I stop on the previous pass? Do I have the amplitude set correctly?
The following Cat Compaction Control Technologies can help provide answers to these questions.
COMPACTION METER
VALUE (CMV)
Utilizes a drum-mounted accelerometer to
measure the combined stiffness of the asphalt
layer, base layer, and sub-base layer. It can help
indicate issues with the road structure, even
beneath the asphalt layer.
AUTO-ADJUSTABLE
COMPACTION
Optimizes efficiency by delivering the highest
level of amplitude that the asphalt can receive
without over-compacting. A dedicated
accelerometer on each drum makes sensitivity
adjustments in a fraction of a second for peak
compaction performance. Available on CB10 and
CD10 models only.
MACHINE-TO-MACHINE
COMMUNICATION
Helps keep rolling patterns in sync by sharing
mapped data such as CMV, temperature
mapping, coverage area, and pass-count maps
between the displays of multiple machines.
ATTACHMENT 10
4 CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS Working in unfavorable conditions is typical in the
paving business, but the operating station helps
keep operators comfortable, safe, and productive.
KEEP MOVING FORWARD
Visibility and comfort are enhanced by the 360°
seat positioning option that enables the operator
to always face the direction of travel. Handwheel
steering technology eliminates the front steering
console, enabling the operator to easily monitor
water spray performance as well as oncoming
obstacles. An optional 8-button control panel
simplies control for efficient performance.
360° SEAT POSITIONING
ENHANCES SAFETY
ATTACHMENT 10
CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS 5
BECOME MORE VERSATILE
WITH OSCILLATORY VIBRATION
The design combines high-performance vertical
vibration on the front drum with oscillation
technology on the rear drum. The front drum
with vertical vibration is available in two
amplitude, five amplitude, or Versa-Vibe systems
that provide initial compaction, while the rear
drum with oscillation continues the excellent
performance for optimal smoothness and density.
• Proven pod-style eccentric weight technology developed by Caterpillar
• 2 year/2000 hour service interval helps maximize uptime and limit maintenance costs.
• Durable power-transmission delivers 2-times the load capacity of timing belt systems leading to extended life
• Standard drum and optional hardened drum shells offer exceptional long-term life on a variety of mix designs and delivers outstanding mat texture, density, and smoothness. * Refer to the price list for model availability.
UNIQUE FEATURES
ATTACHMENT 10
6 CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS CD8 CD10
ENGINE
Gross Power 75 kW 102 mhp 100 hp 75 kW 102 mhp 100 hp
MACHINE WEIGHT
Operating Weight with Split Drum 8390 kg 18,497 lb 10 120 kg 22,311 lb Operating Weight – Maximum 9450 kg 20,834 lb 11 440 kg 25,220 lb Static Linear Load 27.9 kg/cm 170 lb/in 29.5 kg/cm 165 lb/in
DIMENSIONS
Overall Length 4284 mm 13 ft 10 in 4322 mm 14 ft 2 in
Overall Width 1664 mm 66 in 1874 mm 74 in
Height 2940 mm 9 ft 8 in 2985 mm 9 ft 9 in
Compaction Width 1500 mm 59 in 1700 mm 67 in
Drum Offset – Optional 1320 mm 51 in 1320 mm 51 in
VIBRATORY SPECIFICATIONS
Amplitude – Maximum 0.65 mm 0.026 in 0.84 mm 0.033 in
Frequency – Minumum/Maximum 42/63.3 Hz – 2,520/3,800 vpm 42/53.3 Hz – 2,520/3,200 vpm Centrifugal Force – Maximum 73.8 kN 16,590 lbF 128.9 kN 28,977 lbF
SERVICE REFILL CAPACITIES
Fuel Tank Capacity 135 L 36 gal 191 L 50 gal
Water Tank Capacity 600 L 159 gal 750 L 198 gal
MANEUVERABILITY MEETS PERFORMANCE
The exclusive drum steer propel system provides a tight turning radius without damaging the hot mat. When turning, the outside drum half rotates faster than the inside drum, eliminating the potential for shoving and tearing that can occur on standard one-peice drum designs.
A TURN FOR THE BETTER
SPLIT DRUMS ELIMINATE TEARING WHEN TURNING
ATTACHMENT 10
CB7 | CB8 | CB10 | CB13 | CB15 | CB16 | CD8 | CD10 TANDEM VIBRATORY ROLLERS 7 CB7 CB8 CB10
ENGINE
Gross Power 75 kW 102 mhp 100 hp 75 kW 102 mhp 100 hp 98 kW 133 mhp 131 hp
MACHINE WEIGHT
Operating Weight with ROPS 7990 kg 17,615 lb 8520 kg 18,783 lb 9500 kg 20,945 lb Operating Weight – Maximum 8720 kg 19,224 lb 9250 kg 20,343 lb 10 235 kg 22,564 lb Static Linear Load 26.3 kg/cm 147 lb/in 25.1 kg/cm 141 lb/in 27.8 kg/cm 156 lb/in
DIMENSIONS
Overall Length 4565 mm 14 ft 5 in 4565 mm 14 ft 5 in 4565 mm 14 ft 5 in Overall Width 1670 mm 65 in 1862 mm 73 in 1872 mm 74 in Height 2980 mm 9 ft 9 in 2980 mm 9 ft 9 in 2982 mm 9 ft 9 in Compaction Width 1500 mm 59 in 1700 mm 67 in 1700 mm 67 in Drum Offset – Optional 170 mm 6 in 170 mm 6 in 170 mm 6 in
VIBRATORY SPECIFICATIONS
Amplitude – Maximum 0.65 mm 0.026 in 0.56 mm 0.022 in 1.06 mm 0.042 in Frequency – Minimum/Maximum 42/63.3 Hz – 2,520/3,800 vpm 53.3/63.3 Hz – 3200/3800 vpm 42/63.3 Hz – 2520/3800 vpm Centrifugal Force – Maximum 78.3 kN 17,603 lbF 78.3 kN 17,603 lbF 128.9 kN 28,977 lbF
SERVICE REFILL CAPACITIES
Fuel Tank Capacity 208 L 55 gal 208 L 55 gal 208 L 55 gal Water Tank Capacity 742 L 196 gal 742 L 196 gal 837 L 221 gal CB13 CB15 CB16
ENGINE
Gross Power 106 kW 144 mhp 142 hp 106 kW 144 mhp 142 hp 106 kW 144 mhp 142 hp
MACHINE WEIGHT
Operating Weight with ROPS 12 500 kg 27,557 lb 13 135 kg 28,958 lb 14 488 kg 31,941 lb Operating Weight – Maximum 13 150 kg 28,991 lb 13 785 kg 30,391 lb 15 538 kg 34,255 lb Static Linear Load 33 kg/cm 184 lb/in 32 kg/cm 181 lb/in 36 kg/cm 204 lb/in
DIMENSIONS
Overall Length 4742 mm 15 ft 6 in 4742 mm 15 ft 6 in 4742 mm 15 ft 6 in Overall Width 2325 mm 92 in 2325 mm 92 in 2325 mm 92 in Height 3068 mm 10 ft 3068 mm 10 ft 3068 mm 10 ft
Compaction Width 2000 mm 79 in 2130 mm 84 in 2130 mm 84 in Drum Offset – Optional 170 mm 6 in 170 mm 6 in 170 mm 6 in
VIBRATORY SPECIFICATIONS
Amplitude – Maximum 0.096 mm 0.038 in 1.03 mm 0.041 in 1.03 mm 0.041 in Frequency – Minumum/Maximum 42/63.3 Hz – 2520/3800 vpm 42/63.3 Hz – 2520/3800 vpm 42/63.3 Hz – 2520/3800 vpm Centrifugal Force – Maximum 110 kN 24,728 lbF 138 kN 31,069 lbF 138 kN 31,069 lbF
SERVICE REFILL CAPACITIES
Fuel Tank Capacity 250 L 66 gal 250 L 66 gal 250 L 66 gal Water Tank Capacity 1000 L 264 gal 1000 L 264 gal 1000 L 264 gal
TECHNICAL SPECIFICATIONS
See cat.com for complete specifications.
ATTACHMENT 10
R
For more complete information on Cat products, dealer services and industry solutions, visit us on the web at www.cat.com © 2018 Caterpillar. All Rights Reserved.
VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com www.caterpillar.com
QEDQ2418-01 (06/18)
BACKING YOU EVERY DAY
Buy from Caterpillar and you’re buying more than just a piece of equipment. You’re also buying into a service and support operation that no competitor can match. Every Cat dealer knows that all you care about is your machine being there when you need to use it; downtime is not an option. That’s why we have the industry’s best and most reliable dealer network, bringing you the tools, technologies and know-how to keep your machine
productive and efficient.
CAT® FINANCIAL
Cat® Financial is structured to meet your needs.
Because we understand paving, we can offer
better approval rates, more flexible terms and
payments, and solutions that suit you and your
business.
SERVICE AND SUPPORT
ATTACHMENT 10
WITH ACCU-TRAK ™
WHEEL ASSIST
Packed with technology, yet surprisingly simple to operate, the 480Xi WA harnesses the power and productivity of much larger, self-propelled reclaimers into a very powerful, versatile and affordable loader attachment. Powered by the latest Cummins intercooled turbo-diesel Tier 4 Final Performance Series engine, the 480Xi WA will pulverize up to 12-inch-thick asphalt in a single pass. The innovative upgrades and improvements throughout this new-generation Asphalt Zipper dramatically improve production in thicker asphalt, reliability and longevity of the machine, and ease of use. Full road repairs, base stabilization, street patches, and opening utility trenches in asphalt are just a few of its many uses.
LOADER MOUNT
4' Cutting Width
Reclaimer/Stabilizer
and Utility Trencher
with PATENTED Dual-Frame ZipTec™ Enhanced Pulverizing System and Accu-Trak™ Wheel Assist
480
Shown with optional
150 gallon Wheel Assist Mount
water supply system
ATTACHMENT 11
Hydraulically activated autoadjusting clutch, remote engage, and loader operator’s safety stop
Improved Z-Pro™ X cutter head
for greater production with better
material gradation
Heavier-duty planetary/gear box
for even greater durability
Hardox®-reinforced steel frames
with greater internal abrasion resistance,
for longer life
Hydraulic safety-chain system
ensures secure connection to host vehicle
Full-range depth adjustment,
independent of the loader
Automatic hydraulic belt
tensioning that is dynamically selfadjusting and releases tension when not in use, for greater longevity
Wireless control box for cab of
host vehicle for quicker, more convenient
installation and disconnection, with
improved display
Improved bucket clamping system
for an easier, more secure connection to an
even wider range of loader buckets
Push cooling for lower under-hood
temperatures
Innovative liquid cooling jacket
for up to 5 improved planetary cooling
Quick-Load™ guiding system on all
custom trailers, for easier loading
And much more …
Integrated ZipTec™
Enhanced Pulverizing System,
with full depth range, contained grinding
chamber, and an adjustable baffle for
controlling material size
Milling sled
for easier leveling
Upgraded control panel and
wireless remote with expanded
functionality
Improved Accu-Trak™ Wheel Assist
system with remote-control steering, for even
more precise maneuvering and fine control of
milling depth, enabling use with smaller host
vehicles
Smart cylinders—
improved depth control that is
independently adjustable for
more precise milling
150 gallon wheel assist mount water supply
system (optional) for an on-board, steady supply of water Hydraulically secured top
hatch with automatic latching
and overload protection
Completely Re-engineered, with New Features and Improvements Throughout Powerful Cummins Tier 4 Final
Performance Series engine for quieter,
cleaner power
ATTACHMENT 11
Specifications
Model 480Xi-215H WA 480Xi-260H WA
Engine Cummins
215 hp
Turbo-Diesel
Tier 4 Final
Performance Series
Cummins
260 hp
Turbo-Diesel
Tier 4 Final
Performance Series
Torque 670 ft·lb
—
908 N·m
730 ft·lb
—
990 N·m
Weight 13,800 lbs —
6260 kg
13,850 lbs —
6282 kg
Cutting
Width
48 inches (42, 36, 30, 24 inches available)
— 1219 mm (1067, 914, 762, 610 mm available)
Cutting
Depth
0 to 12 inches —
0 to 305 mm
Standard Features
Cutter
Head
Z-Pro™ X
Cutting
Bits
Double-carbide, bullet-head
Containment
System
Dual-Frame ZipTec™
Enhanced Pulverizing System
with active-hydraulic rear
baffle
Planetary Fairfield Magnum-duty
Depth
Control
Hydraulic (infinitely adjustable)
Bit Hatch Hydraulically powered,
top access, with hydraulic shock
absorption
Rear
Baffle
Infinitely adjustable, activehydraulic, remote-controlled Mounting
System
Versa-Mount™
Universal Coupler with chain
tensioning system
Controls
and
Monitoring
• Control Panel (on machine)
• Wireless Control Box
(for host vehicle)
• Wireless Remote Control
(for groundsman)
Transport Tows behind 1½-ton pickup on
tandem-axle trailer.
Additional
Features
• Accu-Trak™ Wheel Assist
• Built-in spray system
• Hydraulic belt tensioning
• Planetary cooling jacket
• Push fan under-hood cooling
Available Options
Side Shift and Tilt
Optional Mounting Systems:
• Quick Coupler
• Versa-Mount™ Quick Coupler
Water Supply Systems:
• Wheel Assist Mount (150 gallon)
Custom Trailer
Toll-free: 888-ZIPPER-8 (947-7378)
310 West 700 South, Pleasant Grove, UT 84062
Main: 801-847-3200 • Fax: 801-847-3250
AsphaltZipper.com
Asphalt Zipper reserves the right to change specifications at any time. U.S. patent nos. 7036252, 7066555, 7144087, 8177456, 10086867. Other U.S. and international patents pending. 224
Custom tandem-axle trailer (optional)
with quick-load guiding system, low center of
gravity, convenient working deck, and built-in
custom toolbox enables the 480Xi WA to be
hauled behind a 1½-ton pickup truck.
NEW Wireless
Control Box with
E-Stop and tachometer
gives host vehicle
operator control over
select Zipper functions.
ATTACHMENT 11
4920-6789-1313 v1
NB 9
COUNCIL AGENDA ITEM
October 14, 2025
TO: Mayor and City Council
FROM: Victor Ponto, City Attorney
SUBJECT: Consideration of Censure Resolution Against Councilmember Michael Hurles for Violations of the Municipal Code and for Conduct Unbecoming of an Elected Official
BACKGROUND/DISCUSSION:
The City Council has directed staff to provide a draft censure resolution against Councilmember Michael Hurles for violations of the municipal code and for conduct unbecoming for their consideration. As articulated in detail in the resolution, in the last few months, Councilmember Hurles has violated the municipal code by improperly using City resources for a personal errand, conducted unauthorized settlement negotiations, withheld his attendance from City Council meetings to extract concessions from the Council, and bullied, yelled at, and harassed Mayor Hawkins and Councilmember Smith.
The City as a public entity is charged with protecting the safety and security of its staff and the public, and is entitled to conduct public meetings and the business of the City without disruption in this manner. The sanction of censure of public behavior of an individual carries no penalty other than the censure itself, and the loss of the opportunity to participate in committee assignments. Censure simply represents the collective determination of the legislative body that the behavior that is censured is unacceptable in a civil forum. Accordingly, it is an official statement of reprimand and condemnation for the behavior in question.
Councilmember Hurles was provided with notice of this censure hearing on October 10, 2025.
FISCAL IMPACT:
None.
RECOMMENDATIONS:
1. Consider the attached censure resolution, and either approve, modify, or decline to proceed.
4920-6789-1313 v1
2. Take any other action the Council deems appropriate.
ATTACHMENTS:
Resolution No._____
BWS Client Documents #4921-0050-5712 v5 1
RESOLUTION NO. 25-3171
A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF
CALIFORNIA CITY TO CENSURE COUNCILMEMBER MICHAEL
HURLES FOR CONDUCT IN VIOLATION OF THE CITY’S
MUNICIPAL CODE AND FOR CONDUCT UNBECOMING OF AN
ELECTED OFFICAL
WHEREAS, elected City leaders need to conduct themselves with dignity, fairness, and a sense of propriety and responsibility; and WHEREAS, a legislative body’s censure of one of its members does not violate the censured ’member’s free speech rights under the First Amendment of U.S. Constitution. Blair v. Bethel School Dist., 608 F.3d 540 (9th Cir. 2010). The Blair court commented that “more is fair in electoral politics than in other contexts.... the First Amendment does not succor casualties of the regular functioning of the political process.”; and
WHEREAS, a legislative body’s censure opinion is itself protected by the First Amendment. “…Council members had a corresponding First Amendment right to ‘vot[e] their conscience on the important issues’ they identified in the censure resolution.” Westfall v. City of Crescent City, 2011 WL2110306 (unpublished); see also, Houston Community College System v. Wilson, 595 U.S. 468 (2022) (upholding censure of a board member, which included a reprimand and prohibiting travel at the board’s expense; such penalties did not prevent the board member from exercising his free speech rights and his duties as a board member, and further held that censure is a traditional remedy that has long been available to legislative bodies, and is protected by the free speech rights of the remainder of the board); and
WHEREAS, for a censure resolution where the only penalty is being stripped of committee assignments, due process is satisfied when the censured legislator is given notice and an opportunity to refute the allegations; having a procedure in place for censure is not required. Westfall v. City of Crescent City, 2011 WL2110306 (unpublished); Rodriguez v. Jurupa Unified School District, 2010 WL3135386 (unpublished); and
WHEREAS, as articulated in more detail below, in the last few months, Councilmember Michael Hurles has violated the municipal code and improperly used City resources for a personal errand, conducted unauthorized settlement negotiations, withheld his attendance from City Council meetings to extract concessions from the Council, and bullied, yelled at, and harassed Mayor Marquette Hawkins and Councilmember Ron Smith, as witnessed by the City Manager; and
BWS Client Documents #4921-0050-5712 v5 2
WHEREAS, the City Council was informed that in August Councilmember Hurles engaged in ex parte settlement negotiations with current Public Safety Director Justin Vincent, , without authorization from the City Council.
Councilmember Hurles went so far as to negotiate a settlement agreement with Vincent, and told Vincent he would try to get the matter approved in closed session, without formal Council authorization to broker such an agreement; and.
WHEREAS, the City has reviewed writings which indicate that at the time the City only had three sitting councilmembers, Councilmember Hurles would only show up for a special meeting to approve a proposed settlement agreement, and that such a closed session should happen quickly before the vacant seats are filled to ensure the councilmember’s leverage. On Facebook, the councilmember said he would not show up for any meeting whose purpose was to appoint someone to the then-vacant council seats; and WHEREAS, Councilmember Hurles withheld his presence from Council meetings for weeks, alleging illness. Councilmember Hurles was offered to attend the meetings remotely to accommodate his alleged health issues; the City also offered him the opportunity to take frequent breaks and to shorten the meeting length to accommodate any feelings of discomfort he may have been experiencing. However, the councilmember refused any accommodation; and WHEREAS, Councilmember Hurles’ refusal to attend Council meetings made it impossible to conduct City business for over 50 days; the City scheduled 7 different meetings between July 14 and September 6, which the councilmember did not attend. Councilmembers are elected by their constituents to serve the City and its residents and visitors, and to protect the health and welfare of the City. The councilmember’s absence and the detrimental effects on the City were noted on August 26, 2025 by the Mojave Desert News, which published an article entitled Councilmember Hurles, Where Are You?, which opened with, “Councilmember Hurles; where are you? This seems to be the question that everyone seems to be asking lately. Councilmember Michael Hurles seems to be MIA as the city council tries desperately to continue with city business. This stems from several special meetings where Hurles was either absent or left just after closed session. The business of the city hasn’t been dealt with since July 14th including the city check registry and Calif. City Mayor Marquette Hawkins, councilman Ron Smith and city manager Chris Lopez are getting frustrated because no city business is being taken care of.”; and WHEREAS, Section 2-1.102 of the City of California City Municipal Code provides “Except as otherwise provided by this Code, the Mayor and individual Council members shall deal with the administrative services of the City only through the City Manager. Except for the purposes of inquiry, the Mayor and individual Council members shall not give orders or instructions to any subordinate of the City Manager. The City Manager shall take orders and instructions from the Council only when sitting in a duly held meeting of the
BWS Client Documents #4921-0050-5712 v5 3
Council. Neither the Mayor nor any individual Council member shall separately give any orders or instructions to the City Manager, except for the purposes of inquiry.”; and
WHEREAS, Councilmember Hurles has said that he uses his Councilmember compensation to buy food for the animal shelter, a commendable and altruistic gesture. However, the Council has been informed that the councilmember contacted a fire department captain to arrange pick-up and delivery of the food because the Councilmember stated he was ill and could not bring it in himself. A City fire truck drove to the Councilmember’s house to pick up the animal food and dropped it off at the animal shelter. In addition to being a waste of public resources, use of an emergency vehicle for a delivery creates a threat to public safety as that vehicle is not available for use in an actual emergency; and
WHEREAS, Councilmember Hurles violated the municipal code by contacting city staff directly to arrange pick-up of the animal food for the shelter.
The code requires that all directions or requests to staff be directed to the City Manager, and not to staff directly; and
WHEREAS, at a closed session on September 9, 2025, Councilmember Hurles was asked to leave due to a conflict, and as he left he screamed at the Mayor and the rest of the Council, verbally abusing them. Specifically, Councilmember Hurles made a lunging motion at Councilmember Smith then stood looming over Mayor Hawkins and leaning into the Mayor’s personal space.
The Mayor had to repeat twice in a stern manner “Back off, back off!” for Councilmember Hurles to back away and eventually leave the room. The Mayor states he felt threatened for his personal safety, as well as the safety of the other councilmembers and the city manager. Councilmember Hurles left his seat and in a threatening matter told Councilmember Smith “to make him shut up,” again in reference to the mayor. As he left the room, Councilmember Hurles referred to Councilmember Smith as a “weasel,” and yelled at Councilmember Smith that “you suck his ass,” in reference to the Mayor. Both Mayor Hawkins and Councilmember Smith have filed formal complaints against Councilmember Hurles, seeking some means of relief from such treatment; and WHEREAS, Section 2-1.104(b) provides, in relevant part, the “Mayor Pro Tempore shall serve at the pleasure of the council and may be removed by the affirmative vote of majority of the council, in which event a majority of the council shall select a successor.”
WHEREAS the City Council finds that it must respond to Councilmember Hurles’ conduct unbecoming and to the violation of the municipal code, as such actions are detrimental to the welfare of the City and the City Council’s ability to conduct the business of the people; and
BWS Client Documents #4921-0050-5712 v5 4
WHEREAS, Councilmember Hurles was provided with notice of the Council’s consideration of this item by email to [email protected], on October 10, 2025 at approximately 5:00 p.m. PST; and
WHEREAS, the City Council considered this Resolution No. _______ at its October 14, 2025 meeting, and Councilmember Hurles was provided the opportunity to refuse the allegations.
NOW, THEREFORE, THE CITY COUNCIL OF THE CITY OF
CALIFORNIA CITY DOES RESOLVE AS FOLLOWS:
SECTION 1: To the best of the City Council’s knowledge, the above recitals are true and correct and incorporated by reference.
SECTION 2. Councilmember Michael Hurles has violated the municipal code by contacting staff directly and causing a fire truck to drive to his house to deliver food to the animal shelter.
SECTION 3: Councilmember Hurles’s withholding of his presence at council meetings and refusal to accept accommodations to participate, to have unauthorized settlement negotiations with Vincent, use of public resources for a private errand, and the councilmember’s verbal abuse of his colleagues constitute a violation of Section 2-1.102, and conduct unbecoming: it is unethical behavior that violates professional standards, harms the public trust, and brings discredit upon the City Council and the City of California City. Such actions are detrimental to the welfare of the City and the City Council’s ability to conduct the business of the people.
SECTION 4. The City Council hereby censures Councilmember Hurles for violating the municipal code and for conduct unbecoming. As a result of this censure, the councilmember is stripped of all his committee appointments, and will not be eligible for consideration for any committee appointment for a period of at least 6 months from the date of this Resolution.
SECTION 5. Councilmember Hurles shall not be eligible to serve as Mayor Pro Tem at the next appointment. At that time, Councilmember Hurles will be deemed to have declined to serve as Mayor Pro Tem, and the next Mayor Pro Tem will be selected in accordance with Section 2-1.104 of the California City Municipal Code.
SECTION 6. Councilmember Hurles shall not be eligible to travel at the City’s expense for 6 months following the date of this Resolution.
SECTION 7. The City Council reaffirms its commitment to prioritizing the interests of the City in its conduct, and maintaining civility and compliance with applicable law in carrying on the business of the City.
BWS Client Documents #4921-0050-5712 v5 5
SECTION 8: The City Clerk shall certify to the adoption of this Resolution.
SECTION 9: This Resolution shall be effective immediately upon its adoption.
The foregoing resolution was introduced and adopted at a regular meeting of the City Council of the City of California City held on October 14, 2025, by the following vote, to wit:
AYES:
NOES:
ABSENT:
DATED: October 14, 2025
ATTEST: APPROVED AS TO FORM:
__________________________
Leanndrea Weible Victor Ponto
Acting City Clerk City Attorney