440
QZ-2 QUARTZ COUNTERTOP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color: Rose Bay
Finish:
Edge:
Thickness:
Size:
Location:
NOTES:
2 CM
Cambria
Signature Series
Polished
Square Eased Edge - Refer To Detail For More Information
65.5" x 132"
(Verify per Drawings)
6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Quartz must meet all applicable local, state, and federal fire codes of final destination location.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
Edge Profile
441
SF-1 SOLID SURFACE COUNTERTOP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Series:
Color:
Thickness:
Sheet Size:
Edge:
Finish:
Location:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
4. Installer to verify quantity requirements prior to order.
5. Material must meet all applicable local, state, and federal fire codes of final destination location.
6. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
3. Refer to finish plan and finish schedule in construction documents for locations.
Polished
(Verify per Drawings)
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Square Eased Edge - Refer to Detail for More Information Corian Design
Solid Surface
Carbon Concrete
2 CM
30" x 144"
Edge Profile
53 of 152
REMOVED
442
ST-1 STAIN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Stain:
Note:
Location:
NOTES:
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. Provided and installed by General Contractor.
2. Refer to Finish Plan and Finish Schedule in Construction Documents for all stain locations.
Stain To Match "Minwax Dark Walnut 2716" With Clear Satin Polyurethane Finish. Water Based Stain Shall Not Be Permitted
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). reference only.
4. Sample must be submitted to designer for approval prior to fabrication, along with control sample for comparison.
5. All wood to receive "Flamort T-WC" Fire Retardant. Coating to provide Class B finish with FS/SD 25/25 after stain application.
6. Install per manufacturer's recommendations.
3. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and
1. Sample must be submitted to designer for approval before fabrication along with control samples for comparison
2. All wood to receive "FLAMORT-WC" fire retardent coating to provide class B finish with FS/SD 25/25 after sain application
3. install per manufacturer's recommendations
(Verify per Drawings)
443
ST-2 STAIN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Stain:
Note:
Location:
NOTES:
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
Stain To Match "Wilsonart Laminate Asian Night 7949" With Clear Satin Polyurethane Finish. Water Based Stain Shall Not Be Permitted
1. Sample must be submitted to designer for approval before fabrication along with control samples for comparison
2. All wood to receive "FLAMORT-WC" fire retardent coating to provide class B finish with FS/SD 25/25 after sain application
3. install per manufacturer's recommendations
(Verify per Drawings)
4. Sample must be submitted to designer for approval prior to fabrication, along with control sample for comparison.
5. All wood to receive "Flamort T-WC" Fire Retardant. Coating to provide Class B finish with FS/SD 25/25 after stain application.
6. Install per manufacturer's recommendations.
1. Provided and installed by General Contractor.
2. Refer to Finish Plan and Finish Schedule in Construction Documents for all stain locations.
3. All images, photographs, renderings of specified items conatined in this specification package are for general design intent and reference only.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 55 of 152
REMOVED
444
UP-1 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
2% Polyurethane, 80% PVC, 18% Polyester Knit Backing
Justin David
Shane
Barn Door
54"
Irregular
4Wks from time of order/receipt of payments
N/A
100,000 Double Rubs
CAL TECH BUL 117 SEC E, UFAC Class 1, NFPA 260
WIPE WITH A SOFT CLOTH WITH COLD WATER AND MILD SOAP; DRY IMMEDIATELY (Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 56 of 152
REMOVED
445
UP-2 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
5% Recycled Polyester
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
85% Polyester 10% Acrylic
Three Sheep and a Mill
Illedoling
Charcoal
57"
None
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design (Verify per Drawings)
83 yards in stock
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
446
UP-3 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
100% Polyester
Three Sheep and a Mill
Crosswind
Wolverine
57"
None
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
(Verify per Drawings)
In stock
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
447
UP-4 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
100% SD Polyester
Three Sheep and a Mill
Krakow Velvets
Blackest Black
56"
None
In Stock
N/A
100,000 Double Rubs
CAL 117, UFAC 1, NFPA - 260
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
448
UP-5 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
60% Solution Dyed Acrylic 40% Polyester
Anzea
Lafayette
Carmine
54"
None
430 yards in stock
No
100,000 Double Rubs
CAL 117-2013, NFPA 260, UFAC Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
449
UP-6 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
83 yards in stock
No
100,000 Double Rubs
CAL TB 117-2013
WM (Water)
(Verify per Drawings)
100% Polyester
Designtex
Chamonix Crypton
Midnight
54"
None
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
450
UP-7 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
100% Polyester
Reid Witlin
Wool Like
Charcoal
55"
None
In Stock
No
100,000 Double Rubs
CA 117, UFAC Class 1, NFPA 260
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
451
UP-8 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
100% SD Polyester
Three Sheep and a Mill
Krakow Velvets
Steely
56"
None
In Stock
N/A
100,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 63 of 152
REMOVED
452
UP-9 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
60% Solution Dyed Acrylic 40% Polyester
Anzea
Lafayette
Empire
54"
None
In Stock
No
100,000 Double Rubs
CAL 117-2013, NFPA 260, UFAC Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
453
UP-10 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
100% Phthalate Free Vinyl
Concertex
Lyon
Slate
54"
None
No
250,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Bleach)
(Verify per Drawings)
851.50 yards in stock
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.
ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
454
UP-11 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
60% Polyester, 34% Acrylic, 6% Viscose Rayon
Momentum
Amble
Skyline 09156464
54"
None
8 Wks (will advise yds)
Yes
100,000 Double Rubs
CA Bulletin 117 2013, UFAC Class 1, NFPA 260 Class 1
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.
ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
455
UP-12 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
92% Polyester 5% Acrylic, 3% Wool
Three Sheep and a Mill
Seaton
Black
57"
None
In Stock
N/A
100,000 Double Rubs
CAL TB 117, UFAC/NFPA - 260
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.
ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
456
UP-13 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
No
250,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Bleach)
(Verify per Drawings)
100% Phthalate Free Vinyl
Concertex
Lyon
Midnight
54"
None
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED.
ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKEOFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
457
UP-14 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
60% Recycled Polyester, 30% Acrylic, 10% Wool
Three Sheep and A Mill
Symphony
Charcoal Slate
55"
None
No
100,000 Double Rubs
NFPA 260 CAL 117-2013 UFAC 1
W
(Verify per Drawings)
2-3 Weeks
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
458
UP-15 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
53% Repreve Recycled Polyester, 47% Polyester
Momentum
Pip
Pepper
55"
1/4" x 1/8"
In Stock
No
200,000 Double Rubs
CA Bulletin 117 2013
WS (Water)
(Verify per Drawings)
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 70 of 152
REMOVED
459
UP-16 UPHOLSTERY
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
DRY IMMEDIATELY
Location:
Lead Time:
NOTES:
100% Polyurethane
Justin David
Hampton
Black Knight
54"
Irregular
N/A
500,000 Double Rubs
CAL TECH BUL 117 SEC E, UFAC Class 1, NFPA 260
WIPE W/ SOFT CLOTH W/ COLD WATER AND MILD SOAP
(Verify per Drawings)
2 Weeks
intent and reference only.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent.
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 71 of 152
REMOVED
460
UP-17 DRAPERY FABRIC
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Color:
Width:
Repeat:
Content:
Railroaded:
Abrasion:
Rating:
Cleaning Code:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
4. Architect to verify that all flammability requirements are met for property location. The requirements noted within this specification are general, and local flammability requirements may be more stringent. intent and reference only.
3 Weeks
1. Provided and installed by General Contractor per furniture package.
2. Manufacturer to submit CFA for designer's written approval prior to purchasing and fabrication of total quantity.
3. All images, photographs, renderings of specified items contained in this specification package are for general design (Verify per Drawings)
Three Sheep and a Mill
Krakow Velvets
Blazing Red
56"
None
100% SD Polyester
N/A
100,000 Double Rubs
NFPA - 260/CAL TB 117/UFAC1/IMO A. 652(16)8.2
WS (Water)
461
WC-1 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Dobson
Number: ALI-002
Material: Type ll Vinyl
Backing: Non-Woven
Fire Rating: ASTM E84 – Class A
Width: 54" Untrimmed
Repeat: H: 2-1/2" V: 6"
Location:
Lead Time: 7 Weeks
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
Innovations
Alis
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). (Verify per Drawings)
Alis
6. Wall smoothness to be per manufacturer's recommendation.
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
462
WC-2 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: 47118
Material: Vinyl
Backing: Woven
Fire Rating: Class A NFPA 255, NFPA 101, NFPA 286
Width: 54"
Repeat: N/A
Location:
Lead Time: Waiting for response from rep
Lead Time: 4 Weeks
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Koroseal
Arte
Sienna
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
463
WC-3 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Ironstone
Number: T2-FD-06
Material: Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 50"
Repeat: 24" H x 50" V
Location:
Lead Time: 4 Weeks
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Momentum
Tower
Foiled
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
464
WC-4 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Wishful Thinking
Number: PTBT-07
Material: Vinyl
Backing: Fused Polyester
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: N/A
Location:
Lead Time: 10 Weeks
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Momentum
Nufelt Bowtie
Nufelt Bowtie
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
465
WC-5 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Signature
Number: FL21-07
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 18" x 18"
Location:
Lead Time: In Stock
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Koroseal
Fleur
Fleur
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
466
WC-6 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Cormorant
Number: MGE-007
Material: Type II Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 54"
Repeat: N/A
Location:
Lead Time: 4 Weeks
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Innovations
Mangrove
Mangrove
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
467
WC-7 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Cabo
Number: RA21-08
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 24" x 52"
Location:
Lead Time: In Stock
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Koroseal
Arco
Arco
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
468
WC-8 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Amore
Number: FL21-04
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 52"-54"
Repeat: 18" x 18"
Location:
Lead Time: In Stock
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Koroseal
Fleur
Fleur
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
469
WC-9 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color: Custom Colored - PMS 200C and PMS 440C
Number: HAR-08
Material: Type II Vinyl
Backing: Non-woven
Fire Rating: Class A ASTM E-84
Width: 27"
Repeat: V: 32"
Location:
NOTES:
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
Momentum
Source One Signature
Amari
(Verify per Drawings)
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
470
WC-10 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color:
Number: T2-SS-03
Material: Type II Vinyl
Backing: Osnaburg
Fire Rating: Class A ASTM E-84
Width: 54"
Repeat: N/A
Location:
NOTES:
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
Momentum
Tower
Scrape n Scratch
(Verify per Drawings)
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
Flickering Flint
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
6. Wall smoothness to be per manufacturer's recommendation.
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
471
WC-11 WALLCOVERING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Collection:
Name:
Color:
Pattern Match: Straight Match - Diamond pattern to Line Up Consistently Number: N/A
Material: N/A
Backing: N/A
Fire Rating: Class A
Width: 52-54"
Repeat: N/A
Location:
Lead Time: 8 Weeks
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
6. Wall smoothness to be per manufacturer's recommendation.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
Momentum
N/A
Nufelt Custom Print
Black and Red
(Verify per Drawings)
472
WC-12 WALLCOVERING
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Collection:
Name:
Color:
Pattern Match: Per Manufacturer's install instructions
Material: Mylar
Fire Rating: Class A
Width: 54"
Repeat: N/A
Location:
Lead Time: 8 Weeks
NOTES:
6. Wall smoothness to be per manufacturer's recommendation.
5. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
1. Provided and installed by General Contractor.
2. Installer to follow manufacturer's recommended installation instructions.
3. Refer to finish plan and finish schedule in construction documents for locations.
4. Installer to verify quantity requirements prior to order.
Koroseal
N/A
Custom Wallcovering
Black with gold mylar
(Verify per Drawings)
ADDED
473
WT-1 WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Description:
Product:
Color:
Size:
Grout:
Grout Joint:
Pattern:
FS/SD:
Location:
Lead Time:
NOTES:
2. Refer to finish plan and finish schedule in construction documents for locations for tile.
3. Installer to verify quantity requirements prior to tile order.
4. Tile must meet all applicable local, state, and federal fire codes of final destination location.
5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing. reference only.
6. Install per manufacturer's specifications and recommendations.
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX Contact: Dale Roberts - #951.225.0243; [email protected]
1. Provided and installed by General Contractor.
1/16"
1/2 Offset Horizontal Running Bond - Refer to Elevations.
Non-Combustible
(Verify per Drawings)
In Stock
(GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Architectural Surfaces
Black Field Tile
Reality Field
Night
3 x 12" x 8mm
474
WT-2 WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Description:
Product:
Color:
Size:
Grout:
Grout Joint:
Pattern:
FS/SD:
Location:
Lead Time:
NOTES:
2. Refer to finish plan and finish schedule in construction documents for locations for tile.
3. Installer to verify quantity requirements prior to tile order.
4. Tile must meet all applicable local, state, and federal fire codes of final destination location.
5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
Contact: Dale Roberts - #951.225.0243; [email protected] (GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Arcitectual Surfaces
Black Deco Tile
Reality Refraction
Night
3 x 12" x 7mm
6. Install per manufacturer's specifications and recommendations. 1/16"
1/2 Offset Horizontal Running Bond. Refer to Elevations.
Non-Combustible
(Verify per Drawings)
In Stock
1. Provided and installed by General Contractor.
reference only.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
475
WT-3 CERAMIC WALL TILE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/1/2023
SPECIFICATION
Manufacturer:
Description:
Product:
Color:
Size:
Grout:
Grout Joint:
Pattern:
FS/SD:
Location:
Lead Time:
NOTES:
2. Refer to finish plan and finish schedule in construction documents for locations for tile.
3. Installer to verify quantity requirements prior to tile order.
4. Tile must meet all applicable local, state, and federal fire codes of final destination location.
5. All images, photographs, renderings of specified items contained in this specification package are for general design intent and
7. Submit all new substitutions to Ideation Design Group for written approval prior to manufacturing and purchasing.
Contact: Dale Roberts - #951.225.0243; [email protected] (GR-1)
Manufacturer: Custom Building Products
Name: Charcoal
Number: #60
Type: Fusion Pro/Single Compnent Grout
Arcitectual Surfaces
Ceramic Wall Tile
Reality Spectrum
Night
3 x 12" x 11.6mm
6. Install per manufacturer's specifications and recommendations. 1/16"
1/2 Offset Horizontal Running Bond. Refer to Elevations.
Non-Combustible
(Verify per Drawings)
In Stock
1. Provided and installed by General Contractor.
reference only.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
476
ATTACHMENT 4
Furniture Spec List Descriptions
477
STAGE RED - FURNITURE
PROJECT: Stage Red
SPEC # DESCRIPTION VENDOR NOTES
FURNITURE
CH-1 Chair Kellex
CH-2 Chair Regal Seating
CH-3 Chair Amisco
CH-4 Chair Lily Jack
CH-5 Chair MTS
CH-6 Chair Lily Jack
CH-7 Chair Lily Jack
CH-8 Chair Lily Jack
CH-9 Chair Irwin Seating
BS-1 Barstool Regal Seating
CS-1 Counterstool Regal Seating
TT-1 Table Top - 24" DIA Table Designs
TT-2 Table Top - 36" DIA Table Designs
TT-3 Table Top - 24" DIA UB Klem
TB-1 Table Base - Disc Base The Table Factory
TB-2 Table Base - Disc Base The Table Factory
Chairs
Barstools
Table Tops
Table Base
Counterstools
REMOVED REMOVED REMOVED
478
TB-3 Not Used Not Used
TB-4 Table Base - Disc Base Style Nations
T-1 Accent Table Four Hands
T-2 Side Table
Mandy Li
Collection
T-3 Community Table
Mandy Li
Collection
T-4 Coffee Table
Mandy Li
Collection
T-5 Side Table
Mandy Li
Collection
T-6 Lounge Table Audo
T-7 Coffee Table Four Hands
T-8 Side Table
Mandy Li
Collection
T-9 Side Table
Mandy Li
Collection
T-10 Coffee Table Nuevo Living
T-11 Coffee Table Nuevo Living
T-12 Cocktail Table Lily Jack
T-13 Coffee Table Four Hands
BQ-1 Custom Banquette Table Logix
BQ-2 Custom Banquette Table Logix
BQ-3 Custom Banquette Table Logix
BQ-4 Custom Banquette Table Logix
BN-1 Bench Four Hands
BN-2 Bench Villa Hallmark
BN-3 Bench Four Hands
Tables
Banquette
Bench
Clothing Rack
REMOVED REMOVED REMOVED REMOVED REMOVED
479
CR-1 Clothing Rack
William Roberts
Vintage
OT-1 Ottoman ISA
SB-1 Sideboard Four Hands
SB-2 Sideboard Four Hands
SB-3 Sideboard Four Hands
SB-4 Sideboard Four Hands
SO-1 Sofa Villa Hallmark
SO-2 Sofa Villa Hallmark
SO-3 Sofa Charter
SO-4 Sofa Lily Jack
SO-5 Sofa Lily Jack
SO-6 Sofa Lily Jack
SO-7 Sofa Lily Jack
LAMP 1 Floor Lamp
Regina Andrew
Detroit
LAMP 2 Desk Lamp
NOTES:
1. Actual dimensions vary depending on field conditions.
2. All quantities must be verified per final construction documents prior to ordering.
3. Any proposed alternatives to these specifications must be equal or better.
Ottoman
Sideboard
Sofa
Lamps
REMOVED REMOVED REMOVED REMOVED ADDED REMOVED
480
CH-1 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat: (UP-5)
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Kellex
Kennedy Arm Chair
15814-05
Black
24" W x 22.5" D x 33" H x 19.5" Seat Height
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
481
CH-2 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Model Number:
Frame Finish:
Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Regal Seating
95T
Black Legs and Brass Ferrules and Foot Rest
17" W x 17" D x 32" H x 18" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
482
CH-3 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat:
Back: (UP-10)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Amisco
Luongo
30349/69BQ
Sun Gold
(UP-10)
21-1/2" W x 23-1/2" D x 33-5/8" x 18-3/4" Seat Height
450 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
483
CH-4 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Finish:
Seat: (UP-5)
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Lavenue Swivel Lounge Chair Swivel Base
LA2832
Black Fringe
28" W x 31" D x 32" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
484
CH-5 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat: (UP-4)
Back: (UP-4)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
MTS
Corinth
8000
Brass
28-1/2" W x 26-3/4" D x 32" H
(Verify Per Plans)
10-13 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
485
CH-6 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Frame Finish:
Seat: (UP-6)
Back: (UP-6)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Onyx Lounge Chair
NX2323
Brass
23" W x 23" D x 29.5" H x 18" Seat Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 96 of 152
REMOVED
486
CH-7 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat:
Back:
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Lily Jack
Amethyst Swivel Lounge Chair Swivel base
AM3130
(UP-5)
(UP-13)
30.5" W x 30" D x 31.5" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
487
CH-8 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat:
Back:
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Lily Jack
West Coast Desk Chair
WC2525
(UP-16)
(UP-15)
25.5" W x 25.25" D x 31" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 98 of 152
REMOVED
488
CH-9 CHAIR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Model Number:
Seat Finish:
Seat: No.12 Seat
Back: No.8 Meteor
End Panel: No. 140 Fireside
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Irwin Seating
Empire Theater Chair
63.21.140.8
Carnegie Origin
21" W
(Verify Per Plans)
10-12 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
489
BS-1 BARSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Frame Finish:
Seat: (UP-9) with (UP-5) welt
Back: (UP-9)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Regal Seating
P4TFT-30 Bar Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 44" H x 21" D x 30" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
490
CS-1 COUNTERSTOOL
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Frame Finish:
Seat: (UP-5) with (UP-9) welt
Back: (UP-5)
Dimensions:
Weight Rating:
Location:
Lead Time:
NOTES:
Regal Seating
P4TFT-30 Counter Height
Black Legs and Brass Ferrules and Foot Rest
19" W x 21" D x 44" H x 26" Seat Height
350 lbs.
(Verify Per Plans)
8-10 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
491
TT-1 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-1)
24" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks
492
TT-2 TABLE TOP - 36" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Table Designs
Corian Carbon Concrete Solid Surface On 1" Plywood Substrate (TB-2)
36" Diameter Table Top
1-1/2" Brass Edges with Counter Sunk Brass Screws
(Verify Per Plans)
12-14 Weeks
493
TT-3 TABLE TOP - 24" DIA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Finish:
Table Base:
Size:
Edge:
Location:
Lead Time:
NOTES:
UB Klem
24" Ash Plank
Walnut
(TB-4)
24" Diameter Table Top
1-1/4" Thickness
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 104 of 152
REMOVED
494
TB-1 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Product:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. (Verify Per Plans)
8-10 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written (TT-1)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 42" Bar Height
495
TB-2 TABLE BASE - DISC BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Product:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
(TT-2)
The Table Factory
Disc Base
Powdercoat to match (PC-2)
18" D x 40.5" x 28.5" Bar Height
(Verify Per Plans)
8-10 Weeks
496
TB-4 TABLE BASE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Series:
Finish:
Table Top:
Size:
Location:
Lead Time:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Style Nations
Tivoli Black and Brass Collar Table Base
Brass and Black
(TT-3)
17" Dia. X 28.7" H
(Verify Per Plans)
12-16 Weeks
107 of 152
REMOVED
497
T-1 ACCENT TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES). is required for any item supplied by a vendor other than the specified source.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a Four Hands
Cameron Accent
Aged Brass
Tall Table Dims: 8.75" x 8.75" x 20.25" Short Table Dims: 10.75" x 10.75" x 16.5" (Verify Per Plans)
4 Weeks
498
T-2 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Mandy Li Collection
Beryl Side Table
Satin Brushed Brass Top with Black Resin Base
24" D x 42" H - Special Order
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 109 of 152
REMOVED
499
T-3 COMMUNITY TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Michelle C - Table - ST - 023
Dark Ebony Wood Black Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
500
T-4 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
GIL Coffee Table - ST - 009
Dark Ebony Wood Birch Top with Satin Brass Base
30" D x 16" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
501
T-5 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Debby Side Table
Dark Ebony Wood Birch Top with Satin Brass Base
21-3/8" D x 24" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 112 of 152
REMOVED
502
T-6 LOUNGE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Audo
Androgyne Lounge Table
Dark stained oak and Kunis Breccia Sand
47.24" W x 17.72" L x 14.96" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 113 of 152
REMOVED
503
T-7 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Masera Coffee Table
Bluestone Slab and Black Oak Base
60" W x 30" D x 12" H
(Verify Per Plans)
4 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
504
T-8 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Mandy Li Collection
Hannah Side Tale - ST - 010
Dark Ebony Wood Birch Top with Satin Brass Base
14" D x 20" H
(Verify Per Plans)
12-14 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
505
T-9 SIDE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Mandy Li Collection
Hannah Side Tale - ST - 010
Bluestone Top with Dark Ebony Wood Birch and Veneer Base 60" W x 40" D x 16" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
506
T-10 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Nuevo Living
Claudio Coffee Table
Black Wood Vein Marble
30" D x 18" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 117 of 152
REMOVED
507
T-11 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Nuevo Living
Pixie Coffee Table
Black Wood Vein Marble with Brushed Gold Legs
42.8" D x 15.8" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
508
T-12 COCKTAIL TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Lily Jack
Custom Designed Cocktail Table with Bolt Down Base
Black
12" D x 28" Dining Height
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
509
T-13 COFFEE TABLE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Corbet Coffee Table
Black
35.25" D x 15.75" H
(Verify Per Plans)
4 Weeks
clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
510
BQ-1 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 11'-4" x 4'-0" x 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES is required for any item supplied by a vendor other than the specified source.
Table Logix
Custom "L-Shaped" Banquette Seat with Vertical Tuft Channels
511
BQ-2 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 22'-6" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
512
BQ-3 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 15'-0" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
513
BQ-4 CUSTOM BANQUETTE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
CONCEPT IMAGE
Manufacturer:
Item:
Dimensions: 34'-0" LF 42" OAH
Seat: (UP-5)
Back: (UP-5)
Finish: (B-1) Base
Location: (Verify per Drawings)
Lead Time: 12-16 Weeks
NOTES:
Table Logix
Custom Radius Banquette with Vertical Tuft Channels
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
514
BN-1 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Four Hands
Lindy Bench
Rialto Ebony
63" W x 17.75" D x 19.25" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 125 of 152
REMOVED
515
BN-2 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Rogue Bench
Ebony
54" W x 24" D x 25" H
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 126 of 152
REMOVED
516
BN-3 BENCH
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written Four Hands
Fawkes Bench
Brushed Ebony
78.75" W x 28" D x 20" H
(Verify Per Plans)
4 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
517
CR-1 CLOTHING RACK
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written William Roberts Vintage
Industrial Style Heavy Duty Pipe Rolling Clothing Rack
Black
47" W x 61.5" H x 17" D
(Verify Per Plans)
8-10 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
518
OT-1 OTTOMAN
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written ISA
Lava Ottoman
(UP-8)
19" W x 18" H
(Verify Per Plans)
8 Weeks
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 129 of 152
REMOVED
519
SB-1 SIDEBOARD
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Freda Sideboard
Brass
72" W x 18" D x 29" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 130 of 152
REMOVED
520
SB-2 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Mako Small Sideboard
Gray
76" W x 18" D x 34" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
521
SB-3 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Mako Large Sideboard
Gray
100" W x 18" D x 34" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
522
SB-4 SIDEBOARD
PROJECT: Stage Red
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
Four Hands
Hendrick Sideboard
Brass and Gunmetal
73" W x 18" D x 30" H
(Verify Per Plans)
4 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
is required for any item supplied by a vendor other than the specified source.
ADDED
523
SO-1 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat: (UP-1)
Back: (UP-1)
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Custom Round Sette with Diamond Tufting
Brass
60" D
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. 131 of 152
REMOVED
524
SO-2 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Seat:
Back:
Size:
Location:
Lead Time:
NOTES:
Villa Hallmark
Custom kidney Shaped Sofa
(UP-6)
(UP-6)
82" W x 34" D
(Verify Per Plans)
8 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
525
SO-3 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Seat:
Back:
Size:
Location:
Lead Time:
NOTES:
Charter
Sky Two Piece Sectional
(UP-7)
(UP-7)
90" W x 50" D x 30" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
526
SO-4 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-12)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
DN9237
LJ #31 Finish with LJ #1409 PVD Finish Metal Plates
(UP-12)
92" W x 37" D x 34" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
527
SO-5 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish: Maple/Beech Wood Base
Seat:
Back:
Size:
Location:
Note: 18" built in tray
Lead Time:
NOTES:
Lily Jack
Custom Designed Sofa with Built-In Tray
(UP-14)
(UP-14)
133.5" W x 80.75" D x 30" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
528
SO-6 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-3)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
BV10838
LJ #30 FINISH
(UP-3)
108" W x 38" D x 32" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
529
SO-7 SOFA
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Seat:
Back: (UP-2)
Size:
Location:
Lead Time:
NOTES:
Lily Jack
PH9230
LJ 31A
(UP-2)
92" W x 30" D x 34.5" H
(Verify Per Plans)
12-14 Weeks
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source. clarification.
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
530
LAMP1 FLOOR LAMP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
8 Weeks
Regina Andrew Detroit
Trilogy Floor Lamp
Blackened Iron
19.5" W x 69.25" H
(Verify Per Plans)
138 of 152
REMOVED
531
LAMP2 DESK LAMP
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Name:
Finish:
Size:
Location:
Lead Time:
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION. is required for any item supplied by a vendor other than the specified source.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. Refer to drawings for exact locations and/or mounting heights of furniture, fixtures, and equipment. In the event of a discrepancy between drawings and specifications, please contact Ideation Design Group immediately for written clarification.
2. Submittal of shop drawings, finish samples, and/or prototype to Ideation Design Group for review and written approval Rejuvenation
Bruno Table Lamp
Aged Brass/Bronze
11-1/4" W
(Verify Per Plans)
4 Weeks
139 of 152
REMOVED
532
ATTACHMENT 5
Lighting Spec List Descriptions
533
STAGE RED - LIGHTING
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106
ISSUE DATE: 6/26/2023
SPEC # DESCRIPTION VENDOR NOTES
LIGHTING
Type A Custom Pendant BDL Lighting
Type B Recessed Downlight
Solais
Lighting
Type C Custom Wall Sconce with Logo BDL Lighting
Type D LED Tape Light Luminii
Type F Step Light WAC Lighting
Type H Marquee Light Per G.C.
Type K Custom Wall Sconce BDL Lighting
Type L Recessed Linear Light A-Light
Type M Lit Mirror IB Mirror
Type N Custom Pendant BDL Lighting
Type P Flush Mount
Visual
Comfort
NOTES:
1 Actual dimensions vary depending on field conditions.
2. All quantities must be verified per final construction documents prior to ordering.
3. Any proposed alternatives to these specifications must be equal or better.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
534
A
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Dimensions:
Lamp:
Location:
Lead Time:
NOTES:
CUSTOM PENDANT
BDL Lighting
Custom Fixture : CHD-1; Metal, Plated Satin Brass with Frosted White Glass (Verify Per Drawings)
3'-0 W x 1'-5" H
120V
(Verify Per Drawings)
1. Bottom of Fixture is 6'-8" A.F.F.
2. To be on Dimmable Circuit
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
535
B RECESSED DOWNLIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Lamp:
Location:
NOTES:
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
2. To be on Dimmable Circuit
1. Black Cone. Black Flange
120V, 25.4W
(Verify Per Drawings)
Solais Lighting
YR4nc-D-Ym24-40c-27K-1700-BK/BK
(Verify Per Drawings)
YR4nc
4" W
536
C CUSTOM WALL SCONCE WITH LOGO
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
BDL Lighting
Custom Fixture : WSC-1; Semi Gloss Black Powdercoat and Plated Satin Brass (Verify Per Drawings)
Custom
10" W x 27" H
1. General Contractor to provide lamps per manufacturer specifications.
537
D LED TAPE LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Product:
Lamp:
Listing:
Location:
Lead Time:
NOTES:
Luminii
OAX 44 Linear LED Strip - 24 VDC
(Verify Per Drawings)
OAX 44-27K-1212CC-84-C-SA
24V, 2.2W/FT
(Verify Per Drawings)
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
538
F STEP LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
WAC Lighting
WL-LED210-AM-BK
(Verify Per Drawings)
WL-LED210
3-1/8" W x 5" H x 1-7/8" D
1. General Contractor to provide lamps per manufacturer specifications.
539
H BOWERY OUTDOOR CEILING LIGHT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
2. To be on Dimmable Circuit
Quorum
Bowery outdoor Ceiling Light Fixture
(Verify Per Drawings)
QUO663204
4.5"W x 8.25"H
1. General Contractor to provide lamps per manufacturer specifications.
540
K CUSTOM WALL SCONCE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
BDL Lighting
Custom Wall Sconce
(Verify Per Drawings)
Custom
6" W x 16" H
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
541
L RECESSED WALL SCONCE
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
A-Light
Recessed Wall Sconce
(Verify Per Drawings)
D5
Refer to Elevations
542
M LIT MIRROR
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Model:
Dimensions:
Location: (Verify Per Drawings)
NOTES:
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
IB Mirror
Paris Mirror - Acrylic
(Verify Per Drawings)
ACRYX24363000 / 5999
24" x 36"
543
N CUSTOM PENDANT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Dimensions:
Lamp:
Location:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
BDL Lighting
Custom Fixture : CHD-1; Metal, Plated Satin Brass and Frosted White Glass (Verify Per Drawings)
15" W x 24" H
120V
(Verify Per Drawings)
544
P FLUSH MOUNT
PROJECT: Stage Red
LOCATION: Fontana, CA
PROJECT #: 23-106 PAGE: 1 OF 1
ISSUE DATE: 6/26/2023
SPECIFICATION
Manufacturer:
Description:
Quantity:
Finish: Gild
Dimensions:
Wattage:
Location:
NOTES:
IDEATION DESIGN GROUP . 4885 E. WASHINGTON STREET, PHOENIX, AZ 85034 . 602.792.1781 PHONE . 602.792.1846 FAX
THIS SPECIFICATION IS FOR REFERENCE ONLY AND REQUIRES YOU TO ENSURE THAT YOUR USE THEREOF AT YOUR RESTAURANT COMPLIES IN ALL RESPECTS WITH APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND ORDINANCES (INCLUDING DISABILITY ACCESSIBILITY REQUIREMENTS UNDER TITLE III OF THE ADA AND SIMILAR STATE AND LOCAL ORDINANCES).
ALL ORDERS MUST BE MARKED AS SPECIFIED BY IDEATION DESIGN GROUP. ALL INSTALLED FABRICS, UPHOLSTERY, CARPET, WALLCOVERING AND OTHER FINISH MATERIALS MUST MEET LOCAL FIRE CODES AND REGULATIONS. MANUFACTURER MUST PROVIDE FLAME CERTIFICATE TO OWNER/PURCHASER AT TIME ORDER IS SHIPPED. FABRICATOR AND/OR INSTALLER MUST CONFIRM THE EXACT QUANTITIES REQUIRED. ALL SUBSTITUTIONS MUST BE APPROVED BY DESIGNER PRIOR TO ORDERING. MANUFACTURERS MUST PROVIDE MAINTENANCE INSTRUCTIONS. ALL SHOP DRAWINGS, FINISH SAMPLES ARTWORK AND/OR STRIKE-OFFS MUST BE SUBMITTED TO DESIGNER FOR APPROVAL PRIOR TO PRODUCTION.
1. General Contractor to provide lamps per manufacturer specifications.
2. To be on Dimmable Circuit
Visual Comfort
Strada Small Flush Mount
(Verify Per Drawings)
18.75" W x 8' H
6-40 C11
(Verify Per Drawings)
545
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
546
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
547
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
548
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
549
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
550
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
551
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
552
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
553
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
554
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
555
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
556
City of Fontana
Stage RED Interior Remodel 2A (DE-24-25-SB), bidding on 04/01/2024 2:00 PM (PDT)
Printed 04/03/2024
PlanetBids
557
City of Fontana
Action Report
City Council Meeting
8353 Sierra Avenue
Fontana, CA 92335
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
FROM:
Planning Department
SUBJECT:
First Combined General Plan Amendments and Projects for the 1st General Plan Cycle of 2024; Part No. 1 - Monte Vista Residential Project and associated Mitigated Negative Declaration, Part No. 2 - Fontana Business Center and associated Mitigated Negative Declaration, and Part No. 3 - Citrus and Boyle Industrial Commerce Center and associated Mitigated Negative Declaration.
RECOMMENDATION:
Part No. 1 - Monte Vista Residential Project
Master Case No. 20-073: General Plan Amendment No. 20-015, Zoning District Map Amendment No. 20-015, Conditional Use Permit No. 22-013, Tentative Tract Map No. 20-006 (TTM No. 20358), and Design Review No. 20-028 for property comprised of APNs: 0233-122-28, -29, -60, -63 Amendment of the subject site’s General Plan land use designation from SingleFamily Residential (R-SF) to Medium Density Residential (R-M), amendment of the Zoning District Map from Single-Family Residential (R-1) to Medium Density Residential (R-2) , a Conditional Use permit to establish the minimum requirements and specific site development standards under a Planned Unit Development for a 53-lot single- family residential project, a Tentative Tract Map to subdivide four (4) parcels for the development of a 53-lot subdivision, and Design Review for the site and architectural review of a new 53-lot single-family detached residential project within a site comprised of approximately 8.8 acres, pursuant to a Mitigated Negative Declaration and Mitigation Monitoring and Reporting Program. 1a) Adopt Resolution No. 2024-015, (Part No. 1 of General Plan Amendment Cycle No. 1 of 2024,) a Resolution of the City Council of the City of Fontana adopting a Mitigated Negative Declaration, approving a Mitigation Monitoring and Reporting Program pursuant to the California Environmental Quality Act (CEQA) and approving General Plan Amendment (GPA) No. 20-015 (Part No. 1 of General Plan Amendment Cycle No. 1 of 2024) amending Exhibit 15.8 of General Plan Chapter 15 (Land Use, Zoning and Urban Design) to change the land use designation from Single-Family Residential (R-SF) to Medium Density Residential (R-M) for APNs: 0233-122-28, -29, -60 and -63 totaling approximately 8.8 acres located between Poplar Avenue and Catawba Avenue, south of Orchid Avenue, and approving Conditional Use Permit No. 22-013 to establish a Planned Unit Development, Tentative Tract Map No. 20-006 (TTM No. 20358) to subdivide four (4) parcels (approximately 8.8 acres) for the development of a 53-lot subdivision, and Design Review No. 20- 028 for the construction of a 53-lot single-family residential detached dwellings on four parcels, APNs: 0233-122-28, -29, -60 and -63, totaling approximately 8.8 acres, subject to the Conditions of Approval, and;
1b) Read by title only and waive further reading of and introduce Ordinance No. 1943, an Ordinance City of Fontana Page 1 of 11 Printed on 4/3/2024
powered by Legistar™558
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
1b) Read by title only and waive further reading of and introduce Ordinance No. 1943, an Ordinance of the City Council of the City of Fontana, approving, pursuant to a Mitigated Negative Declaration, Zoning District Map Amendment No. 20-015 to update the zoning map from Single-Family Residential (R-1) to Medium Density Residential (R-2) for four (4) parcels APNs: 0233-122-28, -29, - 60 and -63, and that the reading of the title constitutes the first reading thereof.
Part No. 2 - Fontana Business Center 3 Project
Master Case No. 23-013: General Plan Amendment (GPA) No. 23-001, Zoning District Map Amendment (ZCA) No. 23-002, Specific Plan Amendment (SPA) No. 23-001, Tentative Parcel Map No. 23-003 (TPM No. 20795), Administrative Site Plan (ASP) No. 23-006 and Development Agreement No. (AGR) 23-001 for property comprised of APNs: 0255-101-24 and 0255-101-30 - Amendment of the subject site’s General Plan land use designation from Residential Planned Community (R-PC) to General Industrial (I-G), amendment of the Zoning District Map from Residential Planned Community (R-PC) to Southwest Industrial Park Specific Plan (SWIP), a Specific Plan Amendment to include the project site in the Southwest Industrial Park Specific Plan (SWIP), a Tentative Parcel Map for the consolidation of two (2) parcels into one (1) parcel, an Administrative Site Plan for the site and architectural review of a 33,585 square foot industrial commercial center building within a project site comprised of approximately 1.6 acres, and a Development Agreement including provision for a public benefit fee, pursuant to a Mitigated Negative Declaration and Mitigation Monitoring and Reporting Program. 2a) Adopt Resolution No. 2024-016, (Part No. 2 of General Plan Amendment Cycle No. 1 of 2024,) a Resolution of the City Council of the City of Fontana adopting a Mitigated Negative Declaration, approving a Mitigation Monitoring and Reporting Program pursuant to the California Environmental Quality Act (CEQA), and approving General Plan Amendment No. 23-011 (Part No. 2 of General Plan Amendment Cycle No. 1 of 2024) amending Exhibit 15.8 of General Plan Chapter 15 (Land Use, Zoning, and Urban Design) to change the land use designation from Residential Planned Community (R-PC) to General Industrial (I-G) for APNS: 0255-101-24 and -30 totaling approximately 1.6 acres located on the east side of juniper Avenue, south of Santa Ana Avenue, and approving Tentative Parcel Map No. 23-002 (TPM No. 20795) to consolidate two (2) parcels into one (1) parcel, and Administrative Site Plan No. 23-006 for the construction of an approximately 33,585 square foot industrial commerce building on approximately 1.6 acres, subject to the Conditions of Approval; and,
2b) Read by title only and waive further reading of and introduce Ordinance No. 1944, an Ordinance of the City Council of the City of Fontana, approving, pursuant to the Mitigated Negative Declaration and Mitigation Monitoring and Reporting Program for the Fontana Business Center 3 project, Zoning District Map Amendment No. 23-002 to change the zoning designation for APNs: 0255-101-24 and - 30 from Residential Planned Community (R-PC) to Southwest Industrial Park (SWIP) Specific Plan, Slover East Industrial District for approximately 1.6 acres located on the east side of Juniper Avenue, south of Santa Ana Avenue, and that the reading of the title constitutes the first reading thereof; and, 2c) Read by title only and waive further reading of and introduce Ordinance No. 1945, an Ordinance of the City Council of the City of Fontana, approving, pursuant to the project Mitigated Negative Declaration and Mitigation Monitoring and Report Program, Specific Plan Amendment No. 23-001, an amendment to the Southwest Industrial Park (SWIP) Specific Plan to include 1.6 acres in the Slover East Industrial District on the east side of Juniper Avenue, south of Santa Ana Avenue, and that the reading of City of Fontana Page 2 of 11 Printed on 4/3/2024
powered by Legistar™559
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
the title constitutes the first reading thereof; and,
2d) Read by title only and waive further reading of and introduce Ordinance No. 1946, an Ordinance of the City Council of the City of Fontana, approving, pursuant to an adopted Mitigated Negative Declaration, a Development Agreement No. 23-001 between the City of Fontana and Chase Partners, which provides a public benefit fee in the amount of $150,896.25, and that the reading of the title constitutes the first reading thereof.
Part No. 3 - Citrus and Boyle Industrial Commerce Center Project Master Case No. 22-115: General Plan Amendment (GPA) No. 22-009, Zoning District Map Amendment (ZCA) No. 22-009, Tentative Parcel Map No. 22-029 (TPM No. 20834), Design Review (DRP) No. 22-054 and Development Agreement (AGR) No. 22-096 for property comprised of APNs: 0251-151-03 through -07, -09 and -10, -14 through -16, -18 through -22, and -39 through -44 - Amendment of the General Plan land use designation for APN: 0251-151 -10 from Community Commercial (C-C) to Light Industrial (I-L) and amendment of the Zoning District Map for APN 0251-151-10 from Community Commercial (C-1) to Light Industrial (M-1), and a Tentative Parcel Map for the consolidation of twenty-one (21) parcels into one parcel, and Design Review for site and architectural review to construct a 355,995 square foot industrial commerce building within a project site comprised of approximately 15.84 acres (APNs: 0251-151-03 through -07, -09 and -10, -14 through -16, -18 through -22, and -39 through -44), and a Development Agreement including provision for a public benefit fee, pursuant to a Mitigated Negative Declaration and Mitigation Monitoring and Reporting Program. 3a) Adopt Resolution No. 2024-017, (Part No. 3 of General Plan Amendment Cycle No. 1 of 2024,) a Resolution of the City Council of the City of Fontana adopting a Mitigated Negative Declaration and approving a Mitigated Monitoring and Reporting Program pursuant to the California Environmental Quality Act (CEQA), and approving General Plan Amendment No. 22-009 (Part No. 3 of General Plan Amendment Cycle No. 1 of 2024), amending Exhibit 15.8 of General Plan Chapter 15 (Land Use, Zoning, and Urban Design) to change the land use designation from Community Commercial (C-C) to Light Industrial (I-L) for APN: 0251-151-10 totaling approximately 0.9 acres of land located on the north side of Slover Avenue and east of Citrus Avenue, Tentative Parcel Map No. 22-029 (TPMM No. 20834) to consolidate twenty-one parcels into one (1) parcel and Design Review No. 22-054 for the development of a 355,995 square foot industrial commerce center building on APNs 0251-151-03 though -07, -09 and -10, -14 through -16, -18 through -22 and -39 through -44 totaling approximately
15.84 acres located north of Slover Avenue, east of Citrus Avenue, subject to the Conditions of Approval; and,
3b) Read by title only and waive further reading of and introduce Ordinance No. 1947, an Ordinance of the City Council of the City of Fontana, pursuant to an adopted Mitigated Negative Declaration and approved Mitigation Monitoring and Reporting Program for the Citrus and Boyle Project, Zoning District Map Amendment No. 22-009 to change the zoning designation for APN: 0251-151-10 from Community Commercial (C-1) to Light Industrial (M-1) for approximately 0.9 acres located on the north side of Slover Avenue, east of Citrus Avenue, and that the reading of the title constitutes the first reading thereof; and, 3c) Read by title only and waive further reading of and introduce Ordinance No. 1948, an Ordinance of the City Council of the City of Fontana, approving, pursuant to an adopted Mitigated Negative City of Fontana Page 3 of 11 Printed on 4/3/2024
powered by Legistar™560
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
Declaration, a Development Agreement No. 23-096 between the City of Fontana and Chipt Fontana Citrus Avenue, L.P., which provides a public benefit fee in the amount of $49,722.00, and that the reading of the title constitutes the first reading thereof.
COUNCIL GOALS:
· Promote economic development by concentrating on job creation. · Provide a diverse range of housing types and levels of affordability while addressing homelessness in the community by promoting diverse range of housing projects and levels of affordability.
· Enhance the local environment for future generations and create a healthy economic and environmental future by creating neighborhoods that are attractive, safe and convenient for walkers and bicyclists.
· Enhance the local environment for future generations and create a healthy economic and environmental future by adopting policies that promote compact and efficient development in new and existing communities.
DISCUSSION:
As required by state law, the City is limited to amending any element of the General Plan to no more than four (4) times in one (1) calendar year. Since the City receives multiple general plan amendment requests during the year, it is customary to combine the general plan amendment requests. This will be the first combined general plan amendment for calendar year 2024.
This combined general plan amendment package includes three (3) parts and their associated projects which have been designated as Part No. 1 - Monte Vista Residential Project and associated Mitigated Negative Declaration, Part No. 2 - Fontana Business Center 3 and associated Mitigated Negative Declaration, and Part No. 3 - Citrus and Boyle Industrial Commerce Center Project and associated Mitigated Negative Declaration to ensure that the multiple general plan amendments are approved together, thereby counting as one (1) approval. Below is a discussion of the three (3) projects as part of this amendment package.
Discussion Part No. 1 - Monte Vista Residential Project Background:
The project was considered by the Planning Commission at a duly noticed public hearing on January 16, 2024. The Planning Commission voted (3-0) to adopt Resolution PC No. 2024-003, thereby forwarding a recommendation of approval to the City Council.
Project Description/Analysis:
The Applicant, Monte Vista Assets, Inc., is requesting approval of entitlements in support of the development of a 53-lot single-family residential detached project on property comprised of APNs:
0233-122-28, -29, -60, and -63 totaling approximately 8.8 acres located between Poplar Avenue and Catawba Avenue, south of Orchid Avenue..
General Plan Amendment No. 20-015:
The project would amend the General Plan land use designation of the project site from SingleFamily Residential (R-SF) to Medium Density Residential (R-M).The proposed General Plan City of Fontana Page 4 of 11 Printed on 4/3/2024
powered by Legistar™561
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
amendment is consistent with the goals and policies of the Housing Element in the General Plan.
The project is consistent with the following goals of the Housing Element. · Provide adequate housing to meet the needs of all residents in the City of Fontana. · Provide a high standard of quality in existing affordable housing stock.
The project will further meet the following policies of the General Plan Housing Element:
· Goal No.1, Policy No. 1.1, by providing a “Establish a range of rental and for sale housing opportunities in the city” and
· Goal No. 1, Policy No. 1.3 - “Promote the development and access to housing affordable to all income levels in Fontana”
The amendment will present an opportunity for development to be constructed at a higher density, allowing increased residential units and a wider variety of housing types for residents. This amendment will assist the City of Fontana in meeting its Regional Housing Needs Assessment (RHNA) numbers, by increasing the site’s potential from the existing maximum of 44 residential units for the site to 66 residential units, an increase of 22 units.
Zoning District Map Amendment No. 20-015:
The proposal would change the zoning map (Zoning District Map) designation from the Single-Family (R-1) zone to the Medium Density (R-2) zone to allow for the increased density and accompanying development regulations. The Zoning District Map amendment would ensure that zoning for the project site is consistent with the proposed General Plan Amendment.
Conditional Use Permit (CUP) 22-013:
The project includes a Conditional Use Permit application for the purpose of establishing a Planned Unit Development (PUD). The Planned Unit Development (PUD) establishes the minimum requirements and specific site development standards for the development of the 53-lot single-family residential detached dwelling project.
The purpose of a PUD is to encourage creative and desirable livable communities that incorporate modern site plan techniques and building grouping and arrangements that would not necessarily be permitted with the strict application of the Zoning and Development Code. Based on the unique guidelines from the PUD, the applicant has provided a vibrant development that will create a sense of community for the residents.
Tentative Parcel Map No. 20-006 (TPM No. 20358):
The project includes the subdivision four (4) parcels totaling approximately 8.8 adjusted gross acres, for the development of a 53-lot single-family residential PUD subdivision. The minimum single-family lot size within this subdivision is 4,200 square feet with an average of 5,445 square feet, up to 7,077 square feet. The minimum established lot size dimensions are proposed at 50-foot by 84-foot. The project will include on-site and off-site improvements and the undergrounding of utilities. The subdivision will support the development of the project as allowed for by, and proposed under, the Planned Unit Development.
Design Review No. 20-028:
The project includes the development of three proposed floor plans for the two-story single-family detached dwellings at 1,903 square feet, 2,186 square feet, and 2,368 square feet with three architectural styles of homes: Spanish, Tuscan, and Craftsman. Individual two-car garages will be City of Fontana Page 5 of 11 Printed on 4/3/2024
powered by Legistar™562
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
architectural styles of homes: Spanish, Tuscan, and Craftsman. Individual two-car garages will be provided for each dwelling. The dwelling units are arranged with private streets and some shared private alleys.
Each dwelling will reflect light earth tone warm colors (i.e. brown, tan, beige, etc.). There are twelve (12) color schemes provided for the overall project. Architectural relief utilized for the proposed homes consists of stone veneer, decorative window treatments, varied roof lines, architectural “popouts,” banding, porches, and other features appropriate to each theme. The use of a variety of colors and decorative shutters of a contrasting color will further add architectural diversity to each plan. All units are designed with concrete tile roofing material coordinated to match the color scheme of each elevation. All plans are proposed as two-story homes. Several landscaped open spaces areas are included within the development to include a variety of trees, shrubs, perennials, and ground cover and well landscaped pathways for residents. All landscaped areas will adhere to the city’s design guidelines. There will be street landscape treatments along Orchid Avenue and Catawba Avenue.
The site includes a park with a shade structure with picnic tables, open lawn area, BBQ island, and a tot lot area. The amenities are centrally located, so the residents have easy access to them.
Additionally, the amenities are further discussed in the PUD development standards and plan attached.
Access to the site will be gained by either Orchid Avenue or Catawba Avenue, bridging a complete circulation network. All interior streets and alleys are private. The circulation network improvements include paving of the private streets and alleys with curbing and gutters on both sides. Parking spaces are provided along the main private streets.
Each lot will have a six-foot high concrete block wall to define private spaces and to provide privacy and help maintain boundaries of open space areas within the development. A six-foot high tan decorative type wall will surround all areas that are seen from public view of the project site.
The grading is consistent throughout the site, which is relatively flat. Each property will drain to the private street or alley then the area drains will collect the nuisance water and gravity flow into designated chambers located on-site. The overflows from the chamber shall be piped to the paved public street gutter then to the existing storm drain system. The project site is physically suitable in size and shape to support the development. Applicable specific site development standards, building, zoning, and fire codes and standards, will be met and will make for a safe, attractive, and well-designed residential project. The project design incorporates internal safety measures such as sidewalks and lighting to facilitate pedestrians/residents walking in the community.
Environmental:
An Initial Study (IS), Mitigated Negative Declaration, and Mitigation Monitoring and Reporting Program has been prepared for this project pursuant to the California Environmental Quality Act (CEQA) and the 2019 Local Guidelines for Implementing CEQA. The Notice of Intent to Adopt an IS/Mitigated Negative Declaration was published with a public comment period of December 22, 2023 through January 11, 2024. Based on the information in the IS, the project would not have a significant effect on the environment as a result of project implementation and the Mitigated Negative Declaration, and Mitigation Monitoring and Reporting Program are presented for the City Council’s consideration. The IS/MND and Mitigation Monitoring and Reporting Program (MMRP) for this City of Fontana Page 6 of 11 Printed on 4/3/2024
powered by Legistar™563
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
project can be found at <https://www.fontanaca.gov/2137/Environmental-Documents>.
Discussion Part No. 2 - Fontana Business Center 3 Project Background:
The project was considered by the Planning Commission at a duly noticed public hearing on March 19, 2024. The Planning Commission voted (3-0) to adopt Resolution PC No. 2024-023, thereby forwarding a recommendation of approval to the City Council.
Project Description/Analysis:
The applicant, Chase Partners, is requesting approval of entitlements in support of the development of the project site with a 33,505 square foot industrial commerce building and associated improvements on property comprised of APNs 0255-101-24 and 0255-101-30) located on the east side of Juniper Avenue between Santa Ana Avenue and Jurupa Avenue.
General Plan Amendment (GPA) No. 23-001:
The project would amend the general plan land use designation of the project site from Residential Planned Community (R-PC) to General Industrial (I-G) to accommodate the development a new industrial commerce facility. The General Industrial designation would be consistent with adjacent industrial designations on southerly adjacent property, and supports general plan goals, including:
Chapter 13, Goal No. 1, Action A: Establish a balance of industrial and manufacturing development along with services, especially in sectors with living wage jobs. The developer is proposing to construct an industrial commerce building which will require employees for both project construction and for day-to-day operations, both of which will in provide jobs for local communities.
Zoning District Map Amendment (ZCA) No. 23-002 and Specific Plan Amendment (SPA) No. 23- 001:
The applicant proposes to amend the zoning designation of the project site from Residential Planned Community (R-PC) to Specific Plan (SP) to accommodate the proposed development. More specifically, the applicant is requesting to include the project site in the Slover East Industrial District (SED) of the Southwest Industrial Park Specific Plan (SWIP). The SP zoning designation and SED SWIP land use designations would be consistent with the land use designation on the southerly adjacent property and would be consistent with the proposed general plan land use designation.
Tentative Parcel Map No. 20795 (TPM No. 23-003):
The proposed project includes the consolidation of two (2) parcels into one (1) parcel, as well as required street dedication and improvements. The consolidated parcel meets the development standards of the SWIP’s SED land use district and will support the development of a new industrial facility.
Administrative Site Plan Review (ASP) No. 23-006:
The development will be comprised of a 33,505 square foot industrial commerce facility inclusive of 3,000 square feet of office space (1,350 square feet on the ground floor and 1,650 square feet in a second level mezzanine), and 30,585 square feet of warehouse space with 3 loading dock spaces on approximately 1.6 acres. The developer will construct the necessary on-site and off-site City of Fontana Page 7 of 11 Printed on 4/3/2024
powered by Legistar™564
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
improvements required by City standards. The building’s tower element at the main entrance, glass features, painted bands and articulated window framing with glazing provide structural and visual interest. The applicant has incorporated a variety of architectural features on all sides of the building to meet or exceed the design standards for the Slover East Industrial District of Southwest Industrial Park Specific Plan.
The project site is physically suitable in size and shape to support the development of the proposed industrial commerce center building. The applicable building, zoning and fire codes and standards will be incorporated into the project and will make for a safe, attractive, and well-designed project. As proposed, the project site is consistent with the standards of the Slover East Industrial District of the Southwest Industrial Park Specific Plan and all requirements of the Industrial Commerce Centers Sustainability Standards Ordinance. The proposed project has been designed to be compatible with the industrial and commercial uses in the immediate vicinity.
The project site is relatively flat. Retaining walls will not be necessary as the project site has a similar grade as the adjoining parcels. An existing eight-foot-tall block wall will remain in place on a portion of the eastern property line, which separates the project site from large retail store (Home Depot) development. Eight-foot-tall tubular steel fencing will be installed on a portion of the northern, southern, and eastern property lines. The site will be secured with an eight-foot-tall tubular steel gate flanked by and anchored to 14-foot-tall concrete screen walls.
Due to the size of the site, there will be one access point shared by passenger cars and trucks on Juniper Avenue. Passenger car parking is located along the central drive aisle outside and inside of the truck court area. Trucks will be required to travel south toward Jurupa Avenue when departing the project site.
SB330:
As currently zoned, this property would have allowed for the development of one (1) residential unit.
To comply with California’s Housing Crisis Act of 2019 (SB330), the project will participate with the City of Fontana Municipal Code Chapter 30 Article XV “No Net Loss Density Bonus/Replacement Program.” The one (1) unit will be available as a density bonus for other residential properties throughout the city. The program will enable, on a first come, first served basis, density bonuses of up to 20% on other residential parcels until the one (1) residential unit is reclaimed within future planned residential projects.
Pursuant to FMC section 30-967, the Unit Bank cannot exceed 2,200 units. The Unit Bank currently has 1,575 units. This one (1) unit will be added to the Unit Bank increasing the number of units in the Unit Bank to 1,576, which is less than the 2,200 units authorized by the FMC.
Development Agreement (AGR) No. 23-001: The project proposes a development agreement that includes the payment of a public benefit fee of $150,896.25.
Environmental:
An Initial Study (IS), Mitigated Negative Declaration, and Mitigation Monitoring and Reporting Program has been prepared for this project pursuant to the California Environmental Quality Act (CEQA) and the 2019 Local Guidelines for Implementing CEQA. The Notice of Intent to Adopt an IS/Mitigated Negative Declaration and Public Hearing Notice was published with a public comment City of Fontana Page 8 of 11 Printed on 4/3/2024
powered by Legistar™565
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
period of February 27, 2024 to March 18, 2024. Based on the information in the IS and MND, the project would not have a significant effect on the environment as a result of project implementation and a Mitigated Negative Declaration, Mitigation Monitoring and Reporting Program, have been prepared for the City Council’s consideration. The mitigation measures from the Mitigation Monitoring and Reporting Program are included herein as part of the Conditions of Approval. The IS/MND for this project can be found at https://www.fontanaca.gov/2137/Environmental-Documents.
Discussion Part No. 3 - Citrus and Boyle Industrial Commerce Center Project Background:
The project was considered by the Planning Commission at a duly noticed public hearing on March 19, 2024. The Planning Commission voted 3-0 to adopt Resolution PC No. 2024-037, thereby forwarding a recommendation of approval to the City Council.
Project Description/Analysis:
The applicant, MIG, INC, is requesting entitlements in support of the development of the project site with a 355,995 square foot industrial commerce building and associated improvements on property comprised of APNs: 0251-151-03 through -07, -09 and -10, -14 through -16, -18 through -22, and -39 through -44 located north of Slover Avenue, south of Boyle Avenue, east of Citrus Avenue, and west of Oleander Avenue.
General Plan Amendment No. 22-009:
The project would amend the General Plan land use designation for one (1) of the twenty-one (21) project parcels, APN: 0251-151-10 of approximately .9 acres, from Community Commercial (C-C) to Light Industrial (I-L). This would support the development of an industrial commerce center building totaling approximately 355,995 square feet. The Light Industrial designation would be consistent with the adjacent industrial designations on the north, south, and easterly adjacent parcels and the proposal is consistent with General Plan Chapter 13, Goal No. 1, Action A: Establish a balance of industrial and manufacturing development along with services, especially in sectors with living wage jobs. The development of an industrial commerce building would be consistent with the surrounding area and will require employees for both project construction and for day-to-day operations, both of which will in provide jobs for local communities.
Zoning District Map Amendment No. 22-009:
The proposal would amend the zoning map (Zoning District Map) from Community Commercial (C-1) to Light Industrial (M-1) for APN: 0251-151-10 of approximately .9 acres. The Zoning District Map amendment would ensure that zoning for APN: 0251-151-10 is consistent with the proposed General Plan Amendment.
Tentative Parcel Map No. 22-029 (TPM No. 20834):
The applicant has filed for a tentative parcel map to support the proposed development of 15.84 acres of the overall project area. The Tentative Parcel Map would consolidate twenty-one (21) parcels located on north side of Slover Avenue, south of Boyle Avenue, south of Boyle Avenue, west of Citrus Avenue and east of Oleander Avenue into one parcel to support the development of an industrial commerce building. As part of the project the developer will construct all on-site and off-site improvements per the City Standards.
City of Fontana Page 9 of 11 Printed on 4/3/2024
powered by Legistar™566
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
Design Review No. 22-054:
The project includes the development of an industrial commerce center building on an approximately
15.84 acre parcel. The industrial commerce center building has been designed with a combination of office and industrial areas with 355,995 of square footage. A gate-secured truck court with forty-six (46) loading docks located on the south side of the building and 13 loading docks located on the west side of the building are proposed. The building’s tower entry ways, panels, articulated window framing with glazing, and varying roof height provide structural and visual interest. The applicant has incorporated a variety of architectural features on all sides of the buildings to meet or exceed the design guidelines of the Fontana Municipal Code. Proposed landscaping would be ornamental in nature and would feature trees, shrubs, and drought-tolerant accent plants in addition to a variety of groundcovers.
The project site is physically suitable in size and shape to support the development of the proposed industrial commerce buildings. The applicable building codes, zoning codes, and fire codes and standards, will make for a safe, attractive, and well-designed project. As proposed, the project site is consistent with the standards of the Fontana Municipal Code. The proposal has been designed to be compatible with the industrial uses to the south and west of the site, while also providing a development that has been designed with features (architectural relief, added landscaping along the north and south side of the property, street improvements, and lighting), to enhance the character of the area.
Trucks will have access from the two (2) westernmost driveways on Slover Avenue and passenger vehicles will have access from the easternmost driveway on Slover Avenue, in addition to two (2) driveways on Boyle Avenue. Trucks will travel west and east from Slover Avenue and north and south from Citrus Avenue, to and from the project site to access the 10 freeway. The area surrounding the building will drain to the south with the use of underground chambers towards Slover Avenue.
Development Agreement No. 23-096:
The proposes a development agreement that includes a public benefit fee of $49,722.00.
Environmental:
An Initial Study (IS), Mitigated Negative Declaration, and Mitigation Monitoring and Reporting Program has been prepared for this project pursuant to the California Environmental Quality Act (CEQA) and the 2019 Local Guidelines for Implementing CEQA. The Notice of Intent to Adopt an IS/Mitigated Negative Declaration and Public Hearing Notice was published with a public comment period of February 27, 2024 to March 18, 2024. Based on the information in the IS and MND, the project would not have a significant effect on the environment as a result of project implementation and a Mitigated Negative Declaration, Mitigation Monitoring and Reporting Program, have been prepared for the City Council’s consideration. The mitigation measures from the Mitigation Monitoring and Reporting Program are included herein as part of the Conditions of Approval. The IS/MND for this project can be found at <https://www.fontanaca.gov/2137/Environmental-Documents>.
ATTACHMENTS:
City of Fontana Page 10 of 11 Printed on 4/3/2024
powered by Legistar™567
File #: 21-2864 Agenda Date: 4/9/2024
Agenda #: A. Category: Public Hearing
Attachment No. 1 (Part No. 1) Resolution for General Plan Amendment, Tentative Parcel Map, Conditional Use Permit, Design Review, and Mitigated Negative Declaration.
Attachment No. 2 (Part No. 1) Ordinance for Zoning District Map Amendment Attachment No. 3 (Part No. 1) Planning Commission Minutes from January 16, 2024 Attachment No. 4 (Part No. 1) Planning Commission Packet - MCN 20-073 Attachment No. 5 (Part No. 1) Public Hearing Notice
Attachment No. 6 (Part No. 2) Resolution for General Plan Amendment, Tentative Parcel Map, Administrative Site Plan, and Mitigated Negative Declaration Attachment No. 7 (Part No. 2) Ordinance for Zoning District Map Change Attachment No. 8 (Part No. 2) Ordinance for Specific Plan Amendment Attachment No. 9 (Part No. 2) Ordinance for Development Agreement Attachment No. 10 (Part No. 2) Planning Commission Minutes from March 19, 2024 Attachment No. 11 (Part No. 2) Planning Commission Packet - MCN 23-013 Attachment No. 12 (Part No. 2) Public Hearing Notice
Attachment No. 13 (Part No. 3) Resolution for General Plan Amendment, Tentative Parcel Map, Design Review, and Mitigated Negative Declaration
Attachment No. 14 (Part No. 3) Ordinance for Zoning District Map Amendment Attachment No. 15 (Part No. 3) Ordinance for Development Agreement Attachment No. 16 (Part No. 3) Planning Commission Minutes from March 19, 2024 Attachment No. 17 (Part No. 3) Planning Commission Packet - MCN 22-115 Attachment No. 18 (Part No. 3) Public Comments Received Attachment No. 19 (Part No. 3) Public Hearing Notice
FISCAL IMPACT:
Part No. 1 - None.
Part No. 2 - The project includes a Development Agreement that provides for a public benefit fee of $150,896.25.
Part No. 3 - The project includes a Development Agreement that provides for a public benefit fee of $49,722.00.
MOTION:
Approve staff’s recommendation.
City of Fontana Page 11 of 11 Printed on 4/3/2024
powered by Legistar™568
ATTACHMENT NO. 1
RESOLUTION NO. 2024-____
A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF FONTANA
ADOPTING A MITIGATED NEGATIVE DECLARATION (MND),
APPROVING A MITIGATION MONITORING AND REPORTING PROGRAM (MMRP) PURSUANT TO THE CALIFORNIA ENVIRONMENTAL QUALITY ACT (CEQA), AND APPROVING GENERAL PLAN AMENDMENT NO. 20- 015 (PART NO. 1 OF GENERAL PLAN AMENDMENT CYCLE NO. 1 OF 2024) AMENDING EXHIBIT NO. 15.8 OF GENERAL PLAN CHAPTER 15 (LAND USE, ZONING, AND URGAN DESIGN) TO CHANGE THE LAND
USE DESIGNATION FROM SINGLE-FAMILY RESIDENTIAL (R-SF) TO MEDIUM DENSITY RESIDENTIAL (R-M) FOR APNS: 0233-122-28, -29, -60, -63 TOTALING APPROXIMATELY 8.8 ACRES LOCATED BETWEEN
POPLAR AVENUE AND CATAWBA AVENUE, SOUTH OF ORCHID
AVENUE, AND APPROVING A CONDITIONAL USE PERMIT TO
ESTABLISH A PUD DEVELOPMENT, A TENTATIVE TRACT MAP TO
SUBDIVIDE FOUR (4) PARCELS (APPROXIMATELY 8.8 ACRES) FOR THE DEVELOPMENT OF A 53-LOT SUBDIVISION, AND A DESIGN
REVIEW FOR THE CONSTRUCTION OF A 53-LOT SINGLE FAMILY
RESIDENTIAL DETACHED DWELLINGS ON FOUR PARCELS, APNS
0233-122-28, -29, -60, -63, TOTALING APPROXIMATELY 8.8 ACRES.
WHEREAS, APNs: 0233-122-28, -29, -60, and -63 (“Project Site”) were incorporated into the City of Fontana on September 19, 2006; and
WHEREAS, on November 13, 2018, the most recent edition of the City of Fontana General Plan (“General Plan”) was adopted by the Fontana City Council (“City Council”); and
WHEREAS, on August 26, 2020, the City of Fontana (“the City”) received an application from Monte Vista Assets, Inc. (“Applicant”), for four (4) existing lots on the southeast corner of Orchid Avenue and Poplar Avenue and continues to the west side of Catawba Avenue, approximately 8.8 adjusted gross acres, APNs: 0233-122-28; -29, -60, -63 (“Project Site”), for a General Plan Amendment (“GPA No. 20-015”) to amend the land use designation as illustrated on Exhibit 15.8 in Chapter 15 of the General Plan from Single-Family Residential (R-SF) to the Medium Density Residential (R-M) district for the Project Site, a Zoning District Map Amendment (“ZCA No. 20-015), a Conditional Use permit to establish a Planned Unit Development for the project, subdivide four parcels via a Tentative Tract Map, and adopt a Design Review for the site and architectural review to construct 53-lot single-family residential detached dwellings; and, WHEREAS, an amendment to the General Plan will assist the City in meeting its Regional Housing Needs Assessment (RHNA) number and will increase the unit count from the existing maximum of 44 residential units to a maximum of 66 residential units; and
WHEREAS, the amendment to the General Plan Land Use Designation will contribute to a balanced and diverse neighborhood and associated amenities and 569
Resolution No. 2024-_____
ATTACHMENT NO. 1
services, as well as contribute to an infrastructure that will support a qualified workforce; and
WHEREAS, GPA20-015 is considered a “Project” as defined by the California Environmental Quality Act (CEQA); and
WHEREAS, pursuant to the California Environmental Act (CEQA), an Initial Study/Mitigated Negative Declaration and Mitigation Monitoring and Reporting Program was published on August 9, 2023, and determined that, with mitigation, no significant impacts would be result from the project, therefore, a Mitigated Negative Declaration has been recommended for adoption; and
WHEREAS, the project site is comprised of four (4) parcels (APNs: 0233-122-28; -29, -60, -63) located on the Southeast corner of Orchid Avenue and Poplar Avenue and continues to the east side of Catawba Avenue, approximately 8.8 adjusted gross acres; and,
WHEREAS, General Plan Amendment (GPA) No. 20-015 (General Plan land use map), Zoning District Map Amendment (ZCA) No. 20-015, Conditional Use Permit (CUP) No. 22-013, Tentative Tract Map (TTM) No. 20-006 (TTM No. 20358), and a Design Review Project (DRP) 20-028 are supported by the goals and policies of the General Plan; and
WHEREAS, all the notices required by statute or the Fontana Municipal Code have been given as required; and
WHEREAS, on January 16, 2024, the Fontana Planning Commission (“Planning Commission”) conducted a publicly noticed hearing and received public testimony and evidence presented by the Applicant, City staff, and other interested parties, at the Public Hearing held on the project MND, MMRP and MCN No. 20-073, and recommended approval with a vote of 3-0 to the City Council by Resolution PC No. 2024-003; and WHEREAS, on April 9, 2024, the City Council conducted a noticed public hearing on the project, MND, MMRP and, MCN No. 20-073, and received testimony from all parties and documentation from the Planning Commission’s public hearing on January 16, 2024; and
WHEREAS, based on the information presented to and evidence received by the City Council at the public hearing held on April 9, 2024, for the project, MND, MMRP, and MCN No. 20-073, the City Council found that the amendments and project are in conformance with the goals and policies of the General Plan; and WHEREAS, the proposed amendments to the General Plan and Zoning District Map will contribute to additional residential dwelling units that will provide a sustainable community where future occupants of the project site could live and utilize the services in the area as anticipated in the General Plan, also, this amendment will assist the City of Fontana in meeting its Regional Housing Needs Assessment (RHNA) numbers. This change will increase the unit count from the existing maximum of 44 residential units to 66 residential units; and
570
Resolution No. 2024-_____
ATTACHMENT NO. 1
WHEREAS, the City of Fontana wishes to protect and preserve the quality of the life through effective land use and planning; and
WHEREAS, pursuant to Government Code Section 65358 on April 9, 2024, the City Council adopted one General Plan Amendment in the following three parts: Part No. 1 – GPA No. 20-015, Monte Vista Residential Project, Part No. 2 – GPA No. 23-001 Fontana Business Center, and Part No. 3 – GPA No. 22-009 Citrus/Slover Industrial Commerce Center; and
NOW, THEREFORE, the City Council RESOLVES as follows:
SECTION 1. Recitals. The recitals are true and correct and incorporated herein by this reference.
SECTION 2. CEQA. The City Council has reviewed and considered the Initial Study (“IS”), MND, and MMRP, any oral or written comments received, and the administrative record prior to making any decision on the proposed project. The City Council finds that the IS/MND and MMRP contain a complete and accurate reporting of all the environmental impacts associated with the project. The City Council further finds that the MND and MMRP has been completed in compliance with the Sate CEQA Guidelines and Section 6.21 of the City of Fontana’s 2019 Local Guidelines for Implementing CEQA.
a. The City Council has reviewed and considered the information contained in the Final MND and the administrative record, including all written and oral evidence presented to it, and finds, based on its independent review and analysis: (i) that the Final MND was prepared in compliance with CEQA; and (ii) that, based on the imposition of mitigation measures, there is no substantial evidence in the administrative record supporting a fair argument that the Project may have a significant effect on the environment. The City Council finds that the Final MND contains a complete, objective, and accurate reporting of the environmental impacts associated with the project and reflects the independent judgment and analysis of the city. As well the City Council finds that no new significant environmental impacts have been identified in the Final MND and any changes to the Final MND in response to comments or otherwise do not constitute substantial revisions requiring recirculation under State CEQA Guidelines section 15073.5.
b. The City Council has also reviewed and considered the MMRP for the project that has been prepared pursuant to the requirements of Public Resources Code Section 21081.6 and recommends that the City Council find that such MMRP is designed to ensure compliance with the mitigation measures during project implementation. c. Adoption of MND. Pursuant to Public Resources Code section 21080, subdivision (c)(2), the City Council adopts the Final IS/MND prepared for the project. d. Approval of MMRP. Pursuant to Public Resources Code section 21081.6, the City Council approves the MMRP which was prepared for the project and makes it a condition of project approval as attached hereto.
571
Resolution No. 2024-_____
ATTACHMENT NO. 1
e. Notice of Determination. The City Council directs staff to file a Notice of Determination with the San Bernardino County Clerk and the Office of Planning and Research within five (5) working days of approval of the project.
SECTION 3. General Plan Amendment Findings. The City Council hereby makes the following findings for GPA No. 20-015 in accordance with Section 30-31 “Purpose” of the Fontana Zoning and Development Code:
Finding: The purpose and intent is to keep an updated General Plan to reflect the current desires and needs of the citizens for the long -term growth of the City.
Findings of Fact: An amendment to the General Plan land use designation (GPA No. 20-015) to change General Plan land use map, Exhibit No. 15.8, from Single-Family Residential (R-SF) to Medium Density Residential (RM) would allow for the future construction of 22 additional residential units in total. The amendment provides the opportunity for the City to gain additional residential units to provide more housing; this project will further bring a variety of residential units to the City. The additional residential units will help the long-term growth of the City and help to attain the RHNA numbers allocated to the City.
Furthermore, the amendment is consistent with the long-term goals and policies of the General Plan and reflects the current needs and desires of the City’s residents.
SECTION 4. Conditional Use Permit Findings. Based on the information herein, the City of Fontana’s City Council hereby approves the following findings for Conditional Use Permit No. 22-013 in accordance with Section No. 30-150 “Findings for Approval” of the Fontana Zoning and Development Code:
Finding No. 1. The proposed use is allowed within the applicable zoning district and complies with all other applicable provisions of the Zoning and Development Code, Municipal Code, General Plan, any applicable Specific Plan or Area Plan, and City regulations/standards.
Finding of Fact: The project is a 53-lot single-family residential development on 8.8 acres. The approval of the associated General Plan and Zoning Amendments will allow for development of the project within the criteria set forth in the Planned Unit Development standards, which will comply with the applicable building codes, zoning codes, and fire codes and appropriate standards and will make for a safe, attractive, and well-designed project, meeting all development standards.
Finding No. 2: The site is physically suited for the type, density, and intensity of the proposed use including access, utilities, and 572
Resolution No. 2024-_____
ATTACHMENT NO. 1
the absence of physical constraints and can be conditioned to meet all related performance criteria and development standards.
Findings of Fact: The project site is adequate in size, shape, and accessibility to meet the Zoning and Development Code requirements. With the approval of the General Plan Amendment, the proposed density will comply with the General Plan. The site will have two access points for entry into the subdivision, thus providing suitable access to the project. There are no physical constraints that would preclude the project from meeting relevant performance criteria or development standards.
Finding No. 3: Granting the permit would not be detrimental to the public interest, health, safety, convenience, welfare, or materially injurious to persons, property, or improvements in the
vicinity in which the project is located.
Finding of Fact: There will be no adverse effect to the persons, property, or improvements in the vicinity or their permitted uses with the granting of the Conditional Use Permit. The project has been reviewed by the Planning Department, Engineering Department, the Building and Safety Department, and County Fire Prevention for site circulation, access, and safety and deemed compliant with applicable requirements. Any possible adverse effects shall be mitigated by the Conditions of Approval drafted by the Planning Department, set forth in the Conditional Use Permit and as referenced herein. The proposal has been designed to be compatible with the surrounding uses while also providing a development that has been designed with features (architectural relief, added landscaping, street improvements, and lighting), to enhance the character of the surrounding neighborhood.
SECTION 5. Tentative Tract Map Findings. Based on the information herein, the City of Fontana’s City Council hereby approves the following findings for Tentative Tract Map No. 20-006 (TTM No. 20358) in accordance with Section 26-55:
Finding No. 1 That the proposed map is consistent with the city's general plan and any applicable specific plan.
Finding of Fact: With the approval of General Plan Amendment No. 20-015, the proposed tentative tract map meets the specifications of the General Plan. The project specifically meets General Plan Goal 2, which encourages development patterns that support high quality of life by promoting “interconnected neighborhoods with appropriate transitions between lower intensity and higher intensity land uses”.
Finding No. 2. That the design or improvements of the proposed 573
Resolution No. 2024-_____
ATTACHMENT NO. 1
subdivision are consistent with the general plan and any applicable specific plan
Finding of Fact: The project has been designed to be consistent with the General Plan, including any on-site and off-site improvements. The project has been designed with private streets for vehicle and pedestrian access which include off-site improvement on Orchid Avenue, Poplar Avenue, and Catawba Avenue. The project plans have been reviewed by the Planning Department, the Engineering
Department, Building and Safety, and Fire Prevention Department and the conditions of approval will ensure compliance with the City code and regulations.
Finding No. 3. The site is physically suitable for the type and density of the development.
Finding of Fact: The project size, shape, and topography is suitable for this type and density of development. The subdivision is approximately 8.8 gross acres and accommodates the 53 single-family lots, amenities, guest parking, and circulation improvements. The project site is currently vacant with existing single-family homes on all sides. The lot sizes are consistent with surrounding single-family developments. All street improvements will be constructed pursuant to applicable building, zoning, and fire code standards.
Finding No. 4. The design of the subdivision or the proposed improvements are not likely to cause substantial environmental damage or will not substantially and avoidably injure fish or wildlife or their habitat.
Finding of Fact: The design of Tentative Tract Map No. 20-006 (TTM No. 20358) is not likely to cause substantial environmental damage nor substantially and unavoidably injure fish or wildlife or their habitat.
The project will not have a significant effect on the environment with mitigation as a result of project implementation per CEQA.
Technical studies were prepared for this project, which were incorporated into the Initial Study/Mitigated Negative Declaration, which was circulated to the public. A Mitigation Monitoring and Reporting Program has adequately identified any potential impacts associated with the project.
Finding No 5. The design of the subdivision or type of improvement will not cause serious public health problems.
Finding of Fact: The design of Tentative Tract Map No. 20-006 (TTM No. 20358) will not cause public health problems. The project was evaluated to ensure there would be no impacts or mitigation measures required beyond those anticipated in the Initial Study/Mitigated Negative Declaration prepared for the project. Improvements for the project include connection to the public sewer, connection to 574
Resolution No. 2024-_____
ATTACHMENT NO. 1
the public storm drain, sidewalks, drainage, and under grounding of utilities and site grading to provide a safe and well-designed project for the area.
Finding No. 6. That the design of the subdivision or the type of improvements will not conflict with easements acquired by the public at large for access through or use of property within the proposed subdivision.
Finding of Fact: The design of Tentative Tract Map No. 20-006 (TTM No. 20358), and associated public improvements, will not conflict with access easements acquired by the public. The Property will be accessed from either Orchid Avenue or Catawba Avenue. All internal streets will be private. Currently there are no other public access easements through or within the project site.
SECTION 6. Design Review Findings. The City of Fontana City Council hereby makes the following findings for Design Review No. 22-028 in accordance with Section No. 30-120 “Findings for Approval” for Design Review of the Zoning and Development Code:
Finding No. 1 The proposal is consistent with the General Plan, Zoning and Development Code, and any applicable Specific Plan.
Findings of Fact: The project is to develop a PUD for a 53-lot single-family detached residential community, with private internal streets, landscaping, open space, and perimeter walls. The General Plan and Zoning Amendments will allow for this development. The site and building design comply with the criteria contained in the design review section of the City of Fontana’s Zoning and Development Code.
As required, the project has high quality architecture, appropriate screening comprised of walls, and landscaping that will make for an aesthetically and desirable development for the area. With the requested associated general plan amendment that changes the land use designation from R-SF to R-M, the project will meet or exceed the criteria contained in the Design Review section of the City of Fontana’s Zoning and Development Code.
Finding No. 2: The proposal meets or exceeds the criteria contained in this chapter and will result in an appropriate, safe, and desirable development promoting the public health, safety, and welfare of the community.
Findings of Fact: The project will result in the construction of a PUD of 53 singlefamily detached residential lots. The residential buildings will be built pursuant to all applicable building, zoning, and fire codes, in addition to the Conditions of Approval attached hereto and referenced herein. The conditions imposed on the project will promote the public health, safety, and welfare of the occupants and, therefore, the community, resulting in a desirable 575
Resolution No. 2024-_____
ATTACHMENT NO. 1
development.
The project includes street improvements: sidewalks, drainage, grading, and perimeter walls to provide a safe and well-designed complex. The project has been reviewed by the Planning, Engineering, Building and Safety, and Fire Prevention
Departments (“Departments”) for site circulation, access, and safety. The Departments have determined that the project meets or exceeds the standards of the Zoning and Development Code and will provide a safe design for normal public access provided the project complies with the Conditions of Approval.
Finding No. 3: The proposal, in its design and appearance, is aesthetically and architecturally pleasing resulting in a safe, well-designed facility while enhancing the character of the surrounding
neighborhood.
Findings of Fact: The development is aesthetically and architecturally pleasing and compatible with the surrounding area. The project includes three floor plans for the two-story single-family detached dwellings with three architectural styles of homes, Spanish, Tuscan, and Craftsman. Individual two-car garages will be provided for each dwelling. The dwelling units are arranged around a shared private alley ending in a private alley. Several landscaped open spaces areas are included within the development to include a variety of trees, shrubs, perennials, and ground cover and well landscaped pathways for residents. All landscaped areas shall adhere to the city design guidelines. The site includes a park with a shade structure and picnic tables, and a tot lot area. There will be street landscape treatments along Orchid Avenue and Catawba Avenue.
The project site is 8.8 gross acres and is physically suitable in size and shape to support the proposed project. Applicable building, zoning, and fire codes will make for a safe, attractive, and welldesigned project.
Finding No. 4 The site improvements are appropriate and will result in a safe, well designed facility
Finding of Fact: The project site improvements are appropriate and will result in a safe, well-designed development not only to the project site but to the surrounding neighborhood. The subdivision is designed with appropriate pavement, curbs, gutters, sidewalks, and driveways.
Project features include undergrounding of utilities and perimeter walls for safety and privacy. The project has been reviewed by Planning, Engineering, Building and Safety and Fire Departments.
The Departments have determined that the project meets or exceeds the standards of the Zoning and Development Code and will result in a safe, well-designed facility provided the project complies with the Conditions of Approval. The character of the 576
Resolution No. 2024-_____
ATTACHMENT NO. 1
surrounding neighborhood reflects residential uses consisting primarily of detached single-family homes.
SECTION 7. General Plan Amendment Approval. Based on the findings in Section 3, the City Council hereby approves (GPA) No. 20-015 to change General Plan land use designation for the Project Site as illustrated in Exhibit No. 15.8 (General Plan land use map) from Single-Family Residential (R-SF) to Medium Density Residential (R-2), which is comprised of four (4) parcels as shown as Exhibit “A” attached hereto and incorporated herein by reference as fully set forth herein.
SECTION 8. Conditional Use Permit Approval. Based on the findings in Section 4 the City Council of the City of Fontana hereby approves Conditional Use Permit No. 22- 013 subject to the Conditions of Approval, which are attached hereto as Exhibit “C” and incorporated herein by reference as though fully set forth herein.
SECTION 9. Tentative Tract Map Approval. Based on the findings in Section 5 the City Council of the City of Fontana hereby approves Tentative Tract Map No. 20-006 (TTM No. 20385) subject to the Conditions of Approval, which are attached hereto as Exhibit “B” and incorporated herein by reference as though fully set forth herein.
SECTION 10. Design Review Approval. Based on the findings in Section 6 the City Council of the City of Fontana hereby approves Design Review No. 20-028 subject to the Conditions of Approval, which are attached hereto as Exhibit “C” and incorporated herein by reference as though fully set forth herein.
SECTION 12. Resolution Regarding Custodian of Record. The documents and materials that constitute the record of proceedings on which this Resolution has been based are located at the Planning Department, 8353 Sierra Avenue, Fontana, CA 92335.
This information is provided in compliance with Public Resources Code, Section No. 21081.6.
SECTION 13. Certification. The City Clerk of the City Council shall certify to the adoption of this Resolution.
SECTION 11. Effective Dates. This Resolution becomes effective immediately upon its adoption.
SECTION 14. Severability. If any provision of this Resolution or the application of any such provision to any person or circumstance is held invalid, such invalidity shall not affect other provisions or applications of this Resolution that can be given effect without the invalid provision or application.
PASSED, APPROVED AND ADOPTED this 9
th day of April 2024.
READ AND APPROVED AS TO LEGAL FORM:
_____________________
City Attorney
577
Resolution No. 2024-_____
ATTACHMENT NO. 1
ATTEST:
I, Germaine Key, City Clerk of the City of Fontana and Ex-Officio Clerk of the City Council, do hereby certify that the foregoing resolution is the actual resolution duly and regularly adopted by the City of Fontana at a regular meeting thereof, held on the 9 th day
of April 2024, by the following vote to wit:
AYES:
NOES:
ABSENT:
ABSTAIN:
City Clerk of the City of Fontana
Mayor of the City of Fontana
ATTEST:
______________________________________
City Clerk
578
Resolution No. 2024-_____
ATTACHMENT NO. 1
EXHIBIT “A”
EXISTING AND PROPOSED GENERAL PLAN LAND USE DESIGNATION - FOR FOUR (4) PARCELS, (APNS: 0233-122-28; -29, -60, -63) ACRES, FROM SINGLE-FAMILY
RESIDENTIAL (R-SF) TO MEDIUM-DENSITY RESIDENTIAL (R-M) TOTALING APPROXIMATELY 8.8 ACRES.
Existing General Plan Land Use Designation – Single-Family Residential (R-SF) Proposed General Plan Land Use Designation – Medium-Density Residential (R-M) 579
Resolution No. 2024-_____
ATTACHMENT NO. 1
“EXHIBIT B”
CITY OF FONTANA
CONDITIONS OF APPROVAL
PROJECT: Master Case No. 20-073 DATE: April 9, 2024
Tentative Tract Map No. 20-006 (TTM No. 20358)
LOCATION: The project site is an undeveloped site located on the southeast corner of Orchid Avenue and Poplar Avenue and continues to the west side of Catawba Avenue, approximately 8.8 adjusted gross acres, APNs:
0233-122-28; -29, -60, -63.
PLANNING DEPARTMENT:
1. The applicant/developer/property owner shall defend, indemnify, protect and hold harmless the City of Fontana or its agents, officers, attorneys and employees from any and all actual or alleged claims, actions or proceedings against the City of Fontana or its agents, officers, attorneys or employees to attack, set aside, void, annul or seek monetary damages arising out of any challenge to the applicants proposed project or to any approvals of the Planning Commission and/or City Council concerning this project, including but not limited to actions challenging CEQA actions, permits, variances, plot plans, design plans, maps, licenses, and amendments. The City of Fontana shall promptly notify the applicant of any claim, action, or proceeding and the City of Fontana shall cooperate in the defense.
In the event of any such third-party action or proceeding the city shall have the right to retain legal counsel. The applicant shall be responsible for and reimburse the city for such legal fees and costs, in their entirety, including actual attorney fees, which may be incurred by the city in defense of such action or proceeding. This indemnification shall also include but not be limited to, damages, fees and or costs awarded against the city, if any, and cost of suit attorney’s fees, and other costs awarded against the city liabilities and expenses incurred in connection with such claim, action, or proceeding whether incurred by applicant, the city and/or any parties bringing such forth.
The City of Fontana and the applicant acknowledge that the city would not have approved this project if the city were to be liable to applicant in damages under or with respect to all or any part of this application or this condition of approval.
Accordingly, the applicant shall not sue the city for damages or monetary relief for any matter arising from or related to this condition of approval. Applicant’s sole and 580
Resolution No. 2024-_____
ATTACHMENT NO. 1
exclusive remedy exclusive remedy shall be limited to declaratory/injunctive relief, mandate, and/or specific performance.
2. This Tentative Tract Map shall become null and void two (2) years from the date of approval, unless the appropriate permits have been obtained and construction, defined as permit obtainment, commencement of construction of the primary building on site, and successful completion of the first Building and Safety Division inspection, has commenced within this period.
3. The applicant/developer shall underground all utilities, which for the purpose of this condition shall also include all boxes, structures and/or other equipment located in the public right-of-way, any public utility easement(s) and on any private property, to the satisfaction of the Director of Planning. A note to this effect shall be placed on the map prior to recordation of the final map.
4. There shall be no combination wall over three (3) feet of retaining and six (6) feet freestanding wall; the maximum height of any combination shall not exceed nine (9) feet.
5. Solid masonry walls of a minimum of six (6) feet in height measured from finished grade shall have a decorative cap and shall be required at all rear and side property lines.
581
Resolution No. 2024-_____
ATTACHMENT NO. 1
“EXHIBIT C”
CITY OF FONTANA
CONDITIONS OF APPROVAL
PROJECT: Master Case No. (MCN) 20-073 DATE: April 9, 2024 Design Review (DRP) No. 20-028
Conditional Use Permit (CUP) 22-013
LOCATION: The project site is an undeveloped site located on the southeast corner of Orchid Avenue and Poplar Avenue and continues to the west side of Catawba Avenue, approximately 8.8 adjusted gross acres, APNs:
0233-122-28; -29, -60, -63.
PLANNING DEPARTMENT:
1. The rights and privileges granted by this project shall not become effective, nor shall the applicant commence the use for which this project is granted, until both of the following have occurred:
A. All requirements of the Fontana City’s Municipal Code shall be complied with.
B. All Conditions of Approval imposed on this project have been fulfilled.
2. The applicant/developer/property owner shall defend, indemnify, protect and hold harmless the City of Fontana or its agents, officers, attorneys and employees from any and all actual or alleged claims, actions or proceedings against the City of Fontana or its agents, officers, attorneys or employees to attack, set aside, void, annul or seek monetary damages arising out of any challenge to the applicant’s proposed project or to any approvals of the Planning Commission and/or City Council concerning this project, including but not limited to actions challenging CEQA actions, permits, variances, plot plans, design plans, maps, licenses, and amendments. The City of Fontana shall promptly notify the applicant of any claim, action, or proceeding and the City of Fontana shall cooperate in the defense.
In the event of any such third-party action or proceeding, the City shall have the right to retain legal counsel. The applicant shall be responsible and reimburse the City for such legal fees and costs, in their entirety, including actual attorneys’ fees, which may be incurred by the City in defense of such action or proceeding. This indemnification shall also include, but not be limited to, damages, fees and/or costs 582
Resolution No. 2024-_____
ATTACHMENT NO. 1
awarded against the City, if any, and cost of suit, attorneys’ fees, and other costs, liabilities and expenses incurred in connection with such claim, action, or proceeding whether incurred by applicant, the City and/or any parties bringing such forth.
Except as required under applicable State and Federal law, the City of Fontana and the applicant acknowledge that the City would not have approved this project if the City were to be liable to applicant in damages under or with respect to all or an part of this application or this condition of approval. Accordingly, applicant shall not sue the City for damages or monetary relief for any matter arising from or related to this condition of approval. Applicant’s sole and exclusive remedy shall be limited to declaratory/injunctive relief, mandate, and/or specific performance.
3. This project shall comply with all applicable provisions, regulations and development standards of the Fontana Zoning and Development Code, including Section No. 30-326 Development Standards.
4. Historic Archaeological Resources
A. Upon discovery of any tribal cultural or archaeological resources, cease construction activities in the immediate vicinity of the find until the find can be assessed. All tribal cultural and archaeological resources unearthed by project construction activities shall be evaluated by the qualified archaeologist and tribal monitor/consultant. If the resources are Native American in origin, interested Tribes (as a result of correspondence with area Tribes) shall coordinate with the landowner regarding treatment and curation of these resources. Typically, the Tribe will request preservation in place or recovery for educational purposes. Work may continue on other parts of the project while evaluation takes place.
B. Preservation in place shall be the preferred manner of treatment. If preservation in place is not feasible, treatment may include implementation of archaeological data recovery excavation to remove the resource along the subsequent laboratory processing and analysis. All Tribal Cultural Resources shall be returned to the Tribe. Any historic archaeological material that is not Native American in origin shall be curated at a public, non-profit institution with a research interest in the materials, if such an institution agrees to accept the material. If no institution accepts the archaeological material, they shall be offered to the Tribe or a local school or historical society in the area for educational purposes.
C. Archaeological and Native American monitoring and excavation during construction projects shall be consistent with current professional standards. All feasible care to avoid any unnecessary disturbance, physical modification, or separation of human remains and associated funerary objects shall be taken.
Principal personnel shall meet the Secretary of the Interior standards for archaeology and have a minimum of 10 years’ experience as a principal investigator working with Native American archaeological sites in southern California. The Qualified Archaeologist shall ensure that all other personnel are appropriately trained and qualified.
583
Resolution No. 2024-_____
ATTACHMENT NO. 1
5. The construction contractor shall always use the following source controls:
A. Construction shall be limited to 7:00 am to 6:00 pm on weekday, 8:00 am to 5:00 pm on Saturdays, and no construction on Sundays and holidays unless it is approved by the Building Inspector for cases that are considered urgently necessary as defined in Section No. 18-63(7) of the Municipal Code. For all noise-producing equipment, use types and models that have the lowest horsepower and the lowest noise generating potential practical for their intended use. The construction contractor will ensure that all construction equipment, fixed or mobile, is properly operating (tuned-up) and lubricated, and that mufflers are working adequately.
B. Have only necessary equipment onsite.
C. Use manually adjustable or ambient-sensitive backup alarms. When working adjacent to residential use(s), the construction contractor will also use the following path controls, except where not physically feasible, when necessary:
1. Install portable noise barriers, including solid structures and noise blankets, between the active noise sources and the nearest noise receivers.
2. Temporarily enclose localized and stationary noise sources.
3. Store and maintain equipment, building materials, and waste materials as far as practical from as many sensitive receivers as practical.
6. Any foam treatment used for architecture treatments and/or projections located on the first floor shall be covered with concrete or similar durable material a minimum of ¼ inch thick, or as determined by the Director of Planning.
7. The applicant shall post a publicly visible sign on the project site with the telephone number and 24-hour point of contact for dust, noise and construction complaints.
The 24-hour point of contact shall be available 24 hours a day, 7 days a week and have authority to commit additional assets to control dust, or respond to construction complaints after hours, on weekends and on holidays. Construction shall be limited to 7:00 am to 6:00 pm on weekdays, 8:00 am to 5:00 pm on Saturdays, and no construction on Sundays and Holidays.
8. All Conditions of Approval contained herein shall be incorporated into all applicable final construction plans and a copy of these conditions, signed by the property owner or legal representative, shall be placed on a sheet in the final building and grading plans prior to issuance of any building or grading permits.
9. The current development fees must be paid prior to issuance of building/construction permits the Certificate of Occupancy. (Modified by Planning Commission meeting January 16, 2024)
10. After the fifteen (15) day appeal period, the applicant shall remove the notice of Filing sign from the project site. The applicant may request a refund of the $300 sign deposit. The request shall be submitted to the Planning Department. 584
Resolution No. 2024-_____
ATTACHMENT NO. 1
ENGINEERING LAND DEVELOPMENT:
11. The project shall be served by the City’s sanitary sewer system, all sewer facilities shall be constructed in accordance with the City Standards. Main trunk sewer line shall be in accordance with the master sanitary sewer plan or as approved by the City Engineer.
12. The applicant shall obtain design and plan approval from all utility providers having jurisdiction over the on-site and off-site utilities. Completion of all undergrounding of on-site and off-site utilities is required by Section 27-52 of the City Municipal Code and in accordance with plans and specifications approved by the City Engineer.
13. The Applicant shall maintain all improvements and utilities within the public right- ofway, including street sweeping, prior to issuance of final certificate of occupancy by the City.
PRIOR TO ISSUANCE OF GRADING PERMIT
14. The Applicant shall submit and gain approval of a complete Water Quality Management Plan report in accordance with the County of San Bernardino Technical Guidance Document and latest template.
PRIOR TO MAP RECORDATION
15. Applicant shall provide a Land Improvement Subdivision Agreement, with accompanying security. The agreement shall be executed on City-provided forms. (Modified by Planning Commission meeting January 16, 2024)
PRIOR TO ISSUANCE OF CONSTRUCTION PERMITS
16. The Applicant shall record tentative Final map as required for the development. (Modified by Planning Commission meeting January 16, 2024)
17. The Applicant shall submit engineered improvement plans and obtain full approval.
All required public improvements, including but not limited to streets, storm drainage systems, sewers, traffic signals, streetlights, striping, signs, landscape, and any required traffic control and/or detour plans. All plans shall conform to City Standards and Specifications, and as approved by the City Engineer.
PRIOR TO FINAL CERTIFICATE OF OCCUPANCY
(Modified by Planning Commission meeting January 16, 2024)
18. The Applicant/Engineer to provide the City of Fontana with As Built/Record Drawings for all public improvement plans.
19. The Applicant/Engineer shall provide centerline ties to the City of Fontana reflecting proper setting of all survey monuments within the project limits and replace any 585
Resolution No. 2024-_____
ATTACHMENT NO. 1
existing survey monuments damaged or removed during construction.
20. The Applicant/Landscape Architect shall provide a “Landscape Certificate of Compliance” certifying that the work has been designed, installed, and will be maintained in accordance with the City of Fontana’s Model Water Efficiency Landscape Ordinance (Ordinance 1743, FCC Section 28).
PRIOR TO FINAL ACCEPTANCE OF PROJECT
21. Applicant/Design Engineer to provide the City of Fontana with As-Built/Record Drawings for all public improvement plans.
22. The Applicant/Engineer shall provide centerline ties to the City of Fontana reflecting proper setting of all survey monuments within the project limits and replace any existing survey monuments damaged or removed during construction.
23. Applicant/Landscape Architect shall provide a “Landscape Certificate of Compliance” certifying that the work has been designed, installed, and will be maintained in accordance with the City of Fontana’s Model Water Efficiency Landscape Ordinance (Ordinance 1743, FCC Section 28).
24. All sewers shall be video inspected by applicant/contractor. Sewer video shall include clean-out connection, clean-out to lateral segment, lateral, and main line.
The contractor performing the video inspection must have a NASSCO PACP, LACP, and MACP certification. Applicant shall provide a copy of the video on DVD or flash drive to inspection staff with an accompanying full report. Videos to be inspected and approved by City Inspector. If removal and replacement of any utility is required, a subsequent video of the repair will be required.
25. All storm drains shall be video inspected by applicant/contractor. Storm drain video shall include main lines and laterals. Applicant shall provide a copy of the video on DVD or flash drive to inspection staff. Videos to be inspected and approved by City Inspector. If removal and replacement of any utility is required, a subsequent video of the repair will be required.
26. The Applicant/Engineer of Record shall submit a conforming copy of the recorded Memorandum of Agreement for the Water Quality Management Plan and Storm Water Best Management Practices transfer. The Access, Maintenance, and the WQMP Certification for BMP Completion must be submitted to the City Project Engineer.
BUILDING & SAFETY:
27. The applicant shall install an automatic fire suppression system, which is required in all new construction per FMC Chapter 11 Article II. Design and type of system 586
Resolution No. 2024-_____
ATTACHMENT NO. 1
shall be based upon the requirements of the Building Code, Fire Code and the requirements of the Fontana Fire Prevention District.
28. The applicant shall comply with the requirements of the South Coast Air Quality Management District (909-396-2000). SCAQMD requirements shall be satisfied prior to the issuance of any permit if hazardous materials are stored and/or used.
29. The applicant shall verify that any temporary building, trailer, commercial coach, etc. installed and/or used in connection with a construction project complies with FMC Chapter 5 Article XIV.
30. The applicant shall verify that all perimeter/boundary walls are designed and constructed so that the outer/exterior face of the wall is as close as possible to the lot line. In any case, the outer/exterior face of the wall shall be within two (2) inches of the lot line. Distances greater than two (2) inches may be approved prior to construction by the Building Official on a case by case basis for extenuating circumstances.
31. The applicant shall comply with the following grading requirements:
A. Grading plans shall be submitted to and approved by Building & Safety. The grading plans shall indicate all site improvements and shall indicate complete drainage paths of all drainage water run-offs.
B. All drainage water shall drain via approved methods to an approved location, such as a public street, a public drainage system, etc.
C. Drainage water shall not cross over a public sidewalk. Drainage water may, however, cross under a sidewalk if an approved drainage structure is used.
D. A recorded drainage acceptance agreement is required from adjoining property(s) receiving flows from this property.
E. No water course or natural drainage shall be obstructed.
F. Minimum slope or grade for ALL drainage structures shall be one half (0.50) percent for concrete and one (1.0) percent for all other, or as otherwise approved by the Building Official.
G. Drainage water shall not pass from an ‘improved’ type of drainage structure to an ‘unimproved’ type of drainage structure (e.g., concrete swale to a dirt swale) unless otherwise approved by the Building Official.
H. A complete hydrology study using the latest edition of the San Bernardino County Flood Control Hydrology Manual, and complete hydraulic calculations justifying the size, slope, capacity, etc. of any and all drainage structures being utilized, shall be submitted to and approved by Building & Safety.
The on-site drainage system shall, as a minimum, be designed to handle the run-off generated by a ten (10) year storm. Check for flooding of all on-site structures (buildings) and all adjacent properties during a hundred (100) year storm.
587
Resolution No. 2024-_____
ATTACHMENT NO. 1
I. The grading plans shall, as a minimum, contain sections at all lot lines and/or permit boundary lines. These sections shall clearly indicate:
1. The relationship between the proposed finished on-site grade elevations and the existing adjacent property grade elevations (Indicate any additional drainage water that may come from an adjacent property.); and
2. The ground cover/finished surface material being proposed (e.g., type of pavement, plant material, etc.); and
3. All proposed drainage structures; and
4. Any proposed and/or required walls or fencing.
32. The applicant shall verify that all exterior lighting shall be oriented, directed, and/or shielded as much as possible so that direct illumination does not infringe onto adjoining properties.
PRIOR TO ISSUANCE OF BUILDING/CONSTRUCTION PERMITS
33. The following items (as applicable) shall be completed by the applicant and submitted to Building & Safety prior to the issuance of building permits for this project:
A. Precise grading plans shall be approved
B. Rough grading completed
C. Compaction certification
D. Pad elevation certification
E. Rough grade inspection signed off by a City Building Inspector
34. If hazardous substances are used and/or stored, the applicant shall provide a technical opinion and report, identifying and developing methods of protection from the hazards presented by the hazardous materials, may be required. This report shall be prepared by a qualified person, firm, or corporation and submitted to Building & Safety. This report shall also explain the proposed facility's intended methods of operation and list all of the proposed materials, their quantities, classifications, and the effects of any chemical (material) inter-mixing in the event of an accident or spill.
SAN BERNARDINO COUNTY FIRE DEPARTMENT:
35. Jurisdiction. The above referenced project is under the jurisdiction of the Fontana fire Protection District (herein “Fire Department”). Prior to any construction occurring on any parcel, the applicant shall contact the Fire Department for verification of current fire protection requirements. All new construction shall comply with the current California Fire Code requirements and all applicable statutes, codes, ordinances, and standards of the Fire Department.
36. Fire Access Road Width. Prior to map recordation, all fire access roadways shall be designed to meet the requirements for this development and shall be approved by the Fire Department. All buildings shall have access provided by approved 588
Resolution No. 2024-_____
ATTACHMENT NO. 1
roads, alleys and private drives with a minimum twenty-six (26) foot unobstructed width and vertically to fourteen (14) feet six (6) inches in height. Buildings three (3) stories in height or more shall have a minimum access of thirty (30) feet unobstructed width and vertically to fourteen (14) feet six (6) inches in height.
California Fire Code sec 503, SBCFD Standard 503.1
37. Turnaround. An approved turnaround shall be provided at the end of each roadway one hundred and fifty (150) feet or more in length. Cul-de-sac length shall not exceed six hundred (600) feet; all roadways shall not exceed a 12 % grade and have a minimum of nineteen (19) foot inside radius and a forty-five (45) foot outside radius for all turns. California Fire Code sec 503, SBCFD Standard 503.1
38. Street Signs. Approved temporary or permanent street signs shall be installed throughout the project prior any combustible materials being placed on the construction site. California Fire Code sec. 505, SBCFD Standard 505.1
39. Fire Lanes. The applicant shall submit a site plan to the Fire Department for review and approval of all proposed signage and striping for all fire access roadways. All curbs adjacent to fire lanes shall be painted red and “No Parking, Fire Lane” signs shall be installed on public and private roads in accordance with approved standards. SBCFD Standard 501.
40. Water System Commercial. Prior to map recordation, all water supply systems shall be designed to meet the required fire flow for this development and shall be approved by the Fire Department. The required fire flow shall be determined by using Appendix B of the California Fire Code. A minimum of one new six (6) inch fire hydrant assembly with two (2) two and one half (2 1/2) inch and one (1) four (4) inch outlet shall be provided. All fire hydrants shall be spaced no more than three hundred (300) feet apart as measured along vehicular travel-ways.
California Fire Code sec 508, SBCFD Standard 508.1
41. The Fire Flow for this project shall be: 3375 GPM for a 2-hour duration at 20 psi residual operating pressure. Fire Flow is based on a 102,330 sq.ft. structure.
42. Hydrant Marking. Blue reflective pavement markers indicating fire hydrant locations shall be installed as specified by the Fire Department. SBCFD Standard 508.5.2.
43. Water System Certification. The applicant shall provide the Fire Department with a letter from the serving water company, certifying that the required water improvements have been made or that the existing fire hydrants and water system will meet distance and fire flow requirements. Fire flow water supply shall be in place prior to placing combustible materials on the jobsite.
44. Combustible Protection. Prior to combustibles being placed on the project site an approved paved roadway, compacted to SBCFD Standards, providing fire 589
Resolution No. 2024-_____
ATTACHMENT NO. 1
access and fire hydrants providing an acceptable fire flow shall be installed.
California Fire Code sec 508, SBCFD Standard 508.1. (Modified by Planning Commission meeting January 16, 2024)
45. Fire Sprinkler-NFPA #13. An automatic fire sprinkler system complying with NFPA 13 and Fire Department standards is required. A fire sprinkler contractor shall submit three (3) sets of detailed plans to the Fire Department for review and approval. The plans shall include hydraulic calculations and manufacturer specification sheets. The required fees shall be paid at the time of plan submittal.
SBCFD Standard 903.
46. Fire Alarm, Waterflow Monitoring. A water flow monitoring fire alarm system complying with the California Fire Code, NFPA and all applicable codes is required or fire sprinkler systems with twenty (20) sprinkler heads or more. A fire alarm contractor shall submit three (3) sets of detailed plans to the Fire Department for review and approval. The required fees shall be paid at the time of plan submittal. California Fire Code sec. 907, SBCFD Standard 907 FA-M.
47. Fire Extinguishers. Hand portable fire extinguishers are required. The location, type, and cabinet design shall be approved by the Fire Department. California Fire Code sec. 906.
48. Key Box. An approved Fire Department key box is required. The key box shall be provided with a tamper switch and shall be monitored by a Fire Department approved central monitoring service. SBCFD Standard 506. (Removed by the Planning Commission meeting January 16, 2024)
49. Security Gates. In commercial, industrial, and multi-family complexes, all swing gates shall have an approved fire department Knox Lock. Where an automatic electric security gate is used, an approved Fire Department override switch is required. SBCFD Standard 503.1.2 (Removed by the Planning Commission meeting January 16, 2024)
50. Material Identification Placards. The applicant shall install, in all locations deemed appropriate by the Fire Department, approved material identification placards on the outside of all buildings and/or storage tanks that store hazardous or flammable materials. Additional placards shall be required inside the buildings when chemicals are segregated into separate areas. Standard 2703.5. (Removed by the Planning Commission meeting January 16, 2024)
51. Secondary Access. The development shall have a minimum of 2 points of vehicular access during each phase of construction for fire and emergency access purposes and for evacuation routes. SBCFD Standard 503.1
END OF CONDITIONS OF APPROVAL
590
ATTACHMENT NO. 2
ORDINANCE NO. ____
AN ORDINANCE OF THE CITY COUNCIL OF THE CITY OF FONTANA,
APPROVING, PURSUANT TO A MITIGATED NEGATIVE
DECLARATION, ZONING DISTRICT MAP AMENDMENT NO. 20-015 TO UPDATE THE ZONING MAP FROM SINGLE-FAMILY RESIDENTIAL (R1) TO MEDIUM DENSITY RESIDENTIAL (R-2) FOR FOUR (4) PARCELS APNS: 0233-122-28; -29, -60, AND -63 TOTALING APPROXIMATELY
8.8 ADJUSTED GROSS ACRES.
WHEREAS, assessor parcel numbers 0233-122-28; -29, -60, and -63, include four (4) parcels that were annexed from San Bernardino County and incorporated into the City of Fontana. The four (4) parcels were annexed on September 19, 2006 (the “Project Site”); and
WHEREAS, on November 13, 2018, the most recent edition of the City of Fontana General Plan (“General Plan”) was adopted by the Fontana City Council (“City Council”) and the City of Fontana Housing Element was adopted by the City Council on February 8, 2022; and
WHEREAS, on August 26, 2020, the City of Fontana (“the City”) received an application from Monte Vista Assets, Inc (“Applicant”), for four (4) existing lots on the southeast corner of Orchid Avenue and Poplar Avenue and continues to the west side of Catawba Avenue, more specifically known as APNs: 0233-122-28; -29, -60, and -63, (“Project Site”), for a General Plan Amendment (“GPA No. 20-015”) to amend the land use designation illustrate on Exhibit 15.8 in Chapter 15 of the General Plan from SingleFamily Residential (R-SF) to Medium Density Residential (R-M) for the Project Site, and a Zoning District Map Amendment (“ZCA No. 20-015”) to amend the Zoning District Map from Single-Family Residential (R-1) map to Medium Density Residential (R-2) for approximately 8.8 acres and Conditional Use Permit (“CUP No. 22-013”) to establish a Planned Unit Development (PUD), Tentative Tract Map (“TPM No. 20-006”) to subdivide four (4) parcels into 53 lots, and Design Review (“DR No. 20-028”) for site and architectural review for a new 53-lot single-family detached residential project with associated on-site and off-site improvements on APNs: 0233-122-28; -29, -60, and -63.
Both amendments together are known as Master Case Number (“MCN 20-073”). All of the amendments together are known as Master Case Number 20-073 (“MCN NO. 20- 073”); and,
WHEREAS, the amendments to the Zoning District Map will contribute to additional residential dwelling units that will provide a sustainable community where future occupants of the Project Site could live and utilize the services in the area as anticipated in the General Plan; and
WHEREAS, the amendment to the Zoning District Map will assist the City in meeting its Regional Housing Needs Assessment (RHNA) numbers. This change will increase the unit count from the existing maximum of 44 residential units (8.8 acres x 5.0 units/acre 591
Ordinance No. 2024 - ___
ATTACHMENT NO. 2
= 44) compared to a maximum of 66 residential units (8.8 acres x 7.6 units/acre = 66); and
WHEREAS, the amendment to the Zoning District Map will contribute to a balanced and diverse neighborhood and associated amenities and services, as well as contribute to an infrastructure that will support a qualified workforce and attract business; and WHEREAS, the Zoning District Map Amendment is considered a “Project” as defined by the California Environmental Quality Act (CEQA); and WHEREAS, pursuant to the California Environmental Act (CEQA), an Initial Study/Mitigated Negative Declaration (IS/MND) and Mitigation Monitoring and Reporting Program (MMRP) were published December 22, 2023, and concluded that with mitigation, no significant impacts would be caused by the project, therefore, a Mitigated Negative Declaration has been recommended for adoption; and WHEREAS, all the notices required by statute and the Fontana City Code have been given as required; and,
WHEREAS, on January 16, 2024, the Fontana Planning Commission (“Planning Commission”) conducted a publicly noticed hearing and received public testimony and evidence presented by the Applicant, City staff, and other interested parties, at the Public Hearing held on the project, Mitigated Negative Declaration (MND), Mitigation Monitoring and Reporting Program (MMRP) and MCN 20-073, and recommended approval with a vote of 3-0 to the City Council by Resolution PC No. 2024-003; and WHEREAS, on April 9, 2024, the City Council conducted a noticed public hearing on the project, MND, MMRP, and MCN 20-073 and received testimony from all parties and documentation from the Planning Commission’s public hearing on January 16, 2024; and WHEREAS, on April 9, 2024, the City Council, per Resolution 2024-____, adopted the MND along with the MMRP for the project; and
WHEREAS, based on the evidence and testimony presented to the City Council at public hearing held on April 9, 2024, for the project, MND, MMRP and MCN 20-073, the City Council found that the amendments and project are in conformance with the goals and policies of the General Plan as referred herein.
NOW, THEREFORE, THE CITY COUNCIL OF THE CITY OF FONTANA, CALIFORNIA DOES ORDAIN AS FOLLOWS:
SECTION 1. Recitals. The recitals are true, correct and incorporated herein by this reference.
SECTION 2. CEQA. Having considered the adopted Mitigated Negative Declaration and all written and oral evidence presented to the City Council, the Council finds that all environmental impacts of the Project has been address within the Mitigated Negative Declaration, and that there is no substantial evidence in the administrative 592
Ordinance No. 2024 - ___
ATTACHMENT NO. 2