wind, collapse, riot, aircraft, smoke, or other cataclysmic events, and coverage against damage or loss caused by machinery accidents and operational and performance testing, commissioning and start-up, with extended coverage, and providing coverage for transit, with sub-limits sufficient to insure the full replacement value of the property or equipment removed from its site and while located away from its site until the date of final acceptance of the Work.
The making of progress payments to the Contractor shall not be construed as relieving the Contractor or its subcontractors or insurance carriers providing the coverage described herein for responsibility for loss or direct physical loss, damage or destruction occurring prior to final acceptance of the Work. iii. Deductibles and Self-Insured Retention
Any deductibles or self-insurance retentions must be declared to and approved by Racine County so that the County may ensure the financial solvency of the Contractor. At the option of the County, either the insurer shall reduce or eliminate such deductibles or self-insured retentions as respects the County, its officers, officials, and employees; or the Contractor shall procure a bond guaranteeing payment of losses and related investigations, claim administration and defense expenses. Contractor shall pay all deductibles and be liable for all claims, losses and damages for which it self-insures.
iv. Other Insurance Provisions
The policies are to contain, or be endorsed to contain, the following provisions:
1. General Liability, Automobile Liability, and Umbrella/Excess Insurance a. Additional Insured Requirement. Racine County, its elected and appointed officials, officers, boards, commissions, officers, employees, representatives, servants, volunteers and agents (hereinafter referred to as “Insured Party” or “Insured Parties”) are to be covered as additional insureds as respects:
liability arising out of activities performed by or on behalf of the Contractor; products and completed operations of the Contractor, premises owned, leased, or used by the Contractor; and automobiles owned, leased, hired, or borrowed by the Contractor. The coverage shall contain no special limitations on the scope of protection afforded to the Insured Parties.
Nothing contained in this section shall be construed to require the Contractor to provide liability insurance coverage to the any Insured Party for claims asserted against such Insured Party for its sole negligence. b. Primary Insurance Requirement. The Contractor's insurance coverage shall be primary and noncontributing insurance as respects to any other insurance or self-insurance available to the Insured Parties. Any insurance or selfinsurance maintained by the Insured Parties shall be in excess of the Contractor's insurance and shall not contribute with it. c. Reporting Requirement. Any failure to comply with reporting provisions of the policies shall not affect coverage provided to the Insured Parties.
d. Separate Coverage. Coverage shall state that the Contractor's insurance shall apply separately to each Insured Party against whom claim is made or suit is brought.
e. Defense Costs/Cross Liability. Coverage shall be provided on a “pay on behalf” basis, with defense costs payable in addition to policy limits. There shall be no cross liability exclusion.
v. Workers' Compensation and Employers Liability Coverage The Contractor shall have and maintain in full force and effect for the duration of this Agreement, insurance protecting against claims for injuries to persons or damages to property which may arise from or in connection with the performance of the Work by the Contractor, its agents, representatives, employees or subcontractors. The insurer shall agree to waive all rights of subrogation against Racine County, and its officers, officials, employees and volunteers for losses arising from the work performed by the Contractor for Racine County. vi. Waiver of Subrogation
The insurers shall agree under each policy of insurance required by this Contract to waive all rights of subrogation against the Insured Parties for losses arising from work performed by the Contractor for Racine County. vii. All Coverages
1. Notice Requirement.
Each insurance policy required by this Contract shall be endorsed to state that coverage shall not be suspended, voided, canceled, reduced in coverage or in limits except after thirty (30) days' prior written notice by certified mail, return receipt requested, has been given to Racine County Courthouse, Purchasing Department, 730 Wisconsin Avenue, Racine, WI 53403. The County reserves the right to accept alternate notice terms and provisions provided they meet the minimum requirements under Wisconsin law.
2. Acceptability.
The insurance to be maintained by Contractor must be issued by a company licensed or approved to transact business in the State of Wisconsin. Such insurance shall be placed with insurers with a Best's Policyholder’s Rating of “A” or better and with a financial rating of Class VII or greater, or be otherwise acceptable to Racine County. All policies shall be subject to approval by the Racine County Corporation Counsel as to form and content.
3. Failure of Insurers.
The Contractor shall be responsible for any delay resulting from the failure of any insurer to furnish proof of coverage in the prescribed form.
viii. Verification of Coverage
Contractor shall furnish Racine County with certificates of insurance and endorsements to the policies evidencing all coverages required by this Contract.
Additionally, the declarations page for each insurance policy listed on the certificate of insurance shall be submitted to the County. The certificates and endorsements for each insurance policy are to be signed by a person authorized by that insurer to bind coverage on its behalf. The certificates and endorsements shall be received and approved by the County before any work commences.
Racine County reserves the right to require complete, certified copies of all required insurance policies at any time. The contractor shall provide proof that any expiring coverage has been renewed or replaced prior to the expiration of the coverage
ix. Subcontractors
Contractor shall include all subcontractors as insureds under its policies or shall furnish separate certificates and endorsements for each subcontractor. All coverage for subcontractors shall be subject to all of the requirements stated in this Agreement, including, but not limited to, naming the Insured Parties as additional insureds.
3. Bidder SUPPLIED DOCUMENTATION AND MATERIALS; CONFIDENTIALITY All Bidder-supplied materials, including the Bidder’s Bid, become the property of Racine County.
Bidder acknowledges that Racine County is an “authority” for the purposes of the WPRL.
Any information obtained by Racine County is considered public records and will be subject to disclosure under the WPRL, except for information falling within one of the exemptions therefrom. Racine County is required to and shall comply with the WPRL in relation to any records, documents and information related to its dealings and relationship with the Bidder. Nothing in the Master Agreement shall be deemed or construed as a limitation on Racine County’s discretion relating to compliance with the WPRL or other applicable law.
Notwithstanding the foregoing, if any of the material a Bidder provides is confidential or is a proprietary trade secret, Bidder may mark that material with a “Confidential” stamp.
While Racine County will attempt to keep such information confidential, as an authority, it cannot guaranty that it will remain confidential. Racine County will endeavor to inform Bidders of a public records request to view or obtain such information. Any Bidder may contest such a request at its sole expense. Racine County assumes no responsibility for any liability whatsoever in relation to its compliance with the WPRL.
4. AFFIRMATIVE ACTION; NON-DISCRIMINATION
Racine County is committed to fulfilling its role as an Affirmative Action/Equal Opportunity Employer. We request your vigorous support of our Affirmative Action efforts. Our relationship with your agency is based upon your willingness to accept and comply with Executive Order 11246, as amended, and other federal laws requiring equal employment opportunity without regard to race, religion, color, national origin, sex, disability or veteran status. By signing the Certification of Vendor on the Bid Page, you indicate your acceptance and compliance.
In connection with the performance of work awarded under this IFB, the Contractor agrees not to discriminate against any employee or applicant for employment because of age, race, religion, color, handicap, sex, physical condition, developmental disability as defined in Wis. Stat. § 51.01(5)(a), sexual orientation as provided in Wis. Stat. § 111.36, national origin, or military service as provided in Wis. Stat. § 111.355(1). This provision shall include, but not be limited to the following: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. The Contractor further agrees to take affirmative action to ensure equal employment opportunities. The Contractor agrees to post in conspicuous places, available for employees and applicants for employment, notices to be provided by the contracting officer setting forth the provisions of the non-discrimination clause (Wis. Stat. § 16.765 (2)).
5. NATIONAL CONTRACT
Subject to its fiduciary and statutory obligations, Racine County, as the Principal Procurement Agency, defined in Attachment B – National Cooperative Contract to be Administered by OMNIA Partners, intends to partner with OMNIA Partners to make the resultant contract (also known as the “Master Agreement” in materials distributed by OMNIA Partners) from this solicitation available to other public agencies nationally, including state and local governmental entities, public and private primary, secondary and higher education entities, non-profit entities, and agencies for the public benefit (“Public Agencies”), through OMNIA Partners’ cooperative purchasing program. Racine County is acting as the contracting agency for any other Public Agency that elects to utilize the resulting Master Agreement. Use of the Master Agreement by any Public Agency is preceded by their registration with OMNIA Partners (a “Participating Public Agency”). Attachment B – National Cooperative Contract to be Administered by OMNIA Partners contains additional information about OMNIA Partners and the cooperative purchasing agreement.
OMNIA Partners is the largest and most experienced purchasing organization for public and private sector procurement. Through the economies of scale created by OMNIA Partners public sector subsidiaries, National IPA and U.S. Communities, participants have access to more competitively solicited and publicly awarded cooperative agreements. The lead agency contracting process continues to be the foundation for the OMNIA Partners programs. OMNIA Partners is proud to offer more value and resources to state and local government, higher education, K-12 education and nonprofits.
OMNIA Partners provides shared services and supply chain optimization to government, education and the private sector. As a channel partner with Vizient
(formally, Novation), OMNIA Partners leverages over $100 billion in annual supply spend to command the best prices for products and services. With corporate, pricing and sales commitments from the Contractor, OMNIA Partners provides marketing and administrative support for the Contractor that directly promotes the Contractor’s products and services to Participating Public Agencies though multiple channels, each designed to promote specific products and services to Public Agencies on a national basis. Public Agencies benefit from pricing based on aggregate spend and the convenience of a contract that has already been advertised and publicly competed.
The Contractor benefits from a contract that allows Participating Public Agencies to directly purchase goods and services without the Contractor’s need to respond to additional competitive solicitations. As such, the Contractor must be able to accommodate a nationwide demand for services and to fulfill obligations as a nationwide Contractor and respond to the OMNIA Partners documents (Attachment B).
While no minimum volume is guaranteed to the Contractor, the estimated annual volume of Roofing Supplies and Services, Waterproofing and Related Products and Services Specifications purchased under the Master Agreement through OMNIA Partners, Public Sector is approximately $200M. This projection is based on the current annual volumes among Racine County, other Participating Public Agencies anticipated to utilize the resulting Master Agreement to be made available to them through OMNIA Partners, and volume growth into other Public Agencies through a coordinated marketing approach between the Contractor and OMNIA Partners.
The successful Contractor will be required to sign Attachment B – National Cooperative Contract to be Administered by OMNIA Partners, Exhibit B – Administration Agreement.
Contractors should have any reviews required to sign the document prior to submitting a response.
Notwithstanding the foregoing, Racine County makes no representation or warranty concerning the use of the Master Agreement by any other Participating Public Agency.
C. ROOFING SUPPLIES AND SERVICES, WATERPROOFING, AND RELATED
PRODUCTS AND SERVICES SPECIFICATIONS
The requirements identified in this section represent the products and services currently being used and are the basis for the resulting contract. The following specifications are minimum acceptable requirements. Bid specifications may not be revised without an official written addendum issued by the Purchasing Coordinator.
1. DESCRIPTION OF WORK
Bidders that are qualified are expected to propose the broadest possible selection of roofing systems and services, waterproofing products, and related products and services that they offer commercially. The intent of this IFB is to provide Participating Public Agencies with turn-key solutions to meet their various roofing and waterproofing needs. Therefore, the Bidder must demonstrate that it has sufficient experience in providing and installing roofing and waterproofing systems, roofing and waterproofing services, and other related services as described in item b. Qualifying Bidders under Section 3. Award Information. The Bidder must demonstrate in the bid that it satisfactorily possesses the necessary qualifications to Racine County and Participating Public Agencies as further described in Section C. Roofing Supplies and Services, Waterproofing, and Related Products and Services Specifications. The Master Agreement shall be available to Participating Public Agencies who wish to purchase roofing and waterproofing products separately, roofing and waterproofing installation services separately, or any combination of products and services together.
2. TERM
Contract Period: Contracts awarded as a result of bids submitted under this Sealed Bid shall extend from the date of award for a period of sixty (60) full months.
Contract is renewable, at the sole option of Racine County. However, the total duration of the contract, including the exercise of any options, shall not exceed ten (10) years (initial sixty (60) month period and five (5) additional twelve (12) month extension periods). Participating Public Agencies may initiate contracts for projects under the Master Agreement until the end of the contract term. Agreements for projects initiated on or before the end date of the Master Agreement shall remain in effect until the project completion date. Terms and conditions set forth in the Master Agreement shall continue to be applicable for contracts executed on or before the end of the contract term.
Racine County may terminate the Master Agreement without penalty due to the non-appropriation of funds, or for cause or convenience in accordance with the procedures set forth in the Master Agreement.
Participating Agencies commonly require a modification to a term of the Contract (e.g. governing law). The awarded Supplier and Participating Agencies may agree to modify terms on any specific purchase by a Participating Agency without being in conflict with the Contract.
3. PRICING
Prices shall remain fixed for the first twelve (12) months of the Master Agreement term. Reasonable price changes based on market conditions and price/cost analysis may be made after the initial twelve (12) months. The Contractor shall supply documentation satisfactory to Racine County, such as: documented changed to Producers Price Indexes; Consumer Price Indexes; or a manufacturer’s published notification of price change(s). Racine County will evaluate this information to determine if revising the pricing is considered fair and reasonable to the satisfaction of Racine County. Requests for any such change must be received in writing by the Racine County Purchasing Department thirty (30) days prior to the expiration of the original contract term. Racine County may cancel the contract if the price increase request is not approved. All price reductions at the manufacturers’ or distributors’ level shall be reflected in a reduction of the contract price(s) to Racine County retroactive to the effective date of the price reduction(s).
4. ALTERNATIVE COSTING METHOD
If a project requires goods and services that are not covered in the pricing schedule or if a product or service is required that is more appropriate to be custom designed and manufactured to meet an individual project site’s conditions and/or provided for a unique application or project, the successful Contractor may use the alternative costing method as follows: The successful Contractor will be required to: Obtain three (3) written cost proposals from local providers; Use the most advantageous cost proposal; Apply the Racine County discount as submitted on the Pricing Schedule; and All products and services falling under this category must be submitted in advance and approved by the Participating Public Agency prior to being included in any quote or proposal from the successful Contractor.
5. PRICE LIST FOR ADDITIONAL PRODUCTS
The intent is to enter into a Master Agreement for a complete line of roofing systems, waterproofing systems, products and related services. Therefore, in addition to specific line items listed on the pricing schedules, Bidders are encouraged to provide Manufacturer’s Price Lists for additional related products including green products. Bidders shall attach to the Bid Form one (1) copy of one (1) price list or retail price sheet, clearly marking the column to which the discount is applied for each item listed. Manufacturer’s Price Lists shall be the currently published National Standard Manufacturer’s Price Lists. The supplier’s Retail Price Sheets shall be the current Price Sheet at the time of bid submission. Bidders shall quote the percentage of discount from the Manufacturer’s Price List or Retail Price Sheet cited above and shall furnish a copy of same with the bid submission.
Discounts must be stated as a single percentage. FAILURE TO PROVIDE THE MANUFACTURER’S PRICE LIST OR RETAIL PRICE SHEET MAY BE CAUSE FOR REJECTION OF THE BID. When award is made, the successful Contractor shall furnish current catalogs and price lists which shall become a part of the contract. The Bidder’s name and address shall appear on all catalogs and price lists. Where the price list shows more than one (1) column of prices, Bidder shall clearly mark the column which represents its bid. If a fee or charge is to be made, it should be indicated on the Bid Form.
6. SPECIAL OFFERS & PROMOTIONS
In addition to decreasing prices for the balance of the Contract term due to a change in market conditions, the successful Contractor may conduct sales promotions involving price reductions for a specified lesser period. The successful Contractor may offer Participating Agencies competitive pricing which is lower than the not-to-exceed price set forth herein at any time during the Contract term and such lower pricing shall not be applied as a global price reduction under the Contract.
D. AWARD INFORMATION
1. CONDITIONS OF AWARD
All Bidders, by submission of their respective bids, agree to abide by the rules, regulations, procedures, and decisions of Racine County.
2. QUALIFYING BIDDERS
Failure of Bidder to provide the required information, may result in a determination that Bidder is a non-responsive bidder. If Bidder does not adequately demonstrate the necessary qualifications, as outlined throughout Section C. Roofing Supplies and Services, Waterproofing, and Related Products and Services Specifications, Bidder may be deemed not qualified and/or responsible. Racine County reserves the right to make such additional investigations as it deems necessary to verify a Bidder submitting a bid is qualified and responsible to include investigating Bidder’s past work with Racine County and Racine County employees. In addition to the pricing and certification information indicated under item C. Award of this Section, Bidders will submit the following items with their bid: .
i. Include a detailed response to Exhibit A – Contract Requirements, located in Attachment B – National Cooperative Contract to be Administered by OMNIA Partners, to show proof of organizational capacity, equipment, and technical competency.
ii. Evidence of a roofing or general contractor’s license from the State of Wisconsin to perform the work as described in this IFB.
iii. List of the state’s contractor licenses held, either directly by the Bidder and any sub-contractors. The successful Contractor must use subcontractor’s license provided with the bid response for work with Participating Public Agencies. iv. Proof of insurance in the form of a letter from the insurance provider stating the provider’s commitment to insure the Bidder for the types of coverage’s or an Insurance Certificate to be in conformance with the types of coverage’s noted in the IFB.
v. A completed and signed W-9 Request for Taxpayer Identification Number and Certification form.
vi. Proof of performance of similar experience demonstrated by providing a work history that describes their experience in providing labor, supervision, materials, equipment, tools, transport, supplies and installation services for roofing, waterproofing, and related products. Bidders must have the following experience and provide evidence of such with their bid: a minimum of five (5) years’ experience in North America; have successfully delivered, installed and completed two (2) turn-key roofing or waterproofing projects for public agencies in twenty-five (25) states within the previous twenty (20) months where each of the final contract amounts exceeded One Hundred-Thousand dollars ($100,000). Bidders shall provide this information in Attachment D, Experience Record, Bidder’s shall verify contact information listed with projects in Attachment D is up to date and correct prior to submitting a bid. Racine County reserves the right to check references other than those submitted.
vii. Proof of satisfactorily completing past projects and further demonstration of ability to perform the work properly and expeditiously through the submission of detailed descriptions of the following:
1. Bidder’s Business Operations Plan to at a minimum include:
a. A detailed description of the products and services offered, how the business functions on a continuing basis (short- and long-term projects), quality of relevant services, steps taken to adhere to project budgets, any problems encountered and how they were handled (if any). Include an explanation of any roof failures and how they were resolved. b. History of customer relationships with previous public sector customers (not including the Federal Government).
c. Ability to meet set schedules with minimal disruption in service. d. Safety history record for the past five (5) years.
e. Populate the following table, then aggregate the totals for the two (2) cost columns to determine the aggregate change order percentage of bonded public projects performed by the Bidder over the last three (3) years:
Project Bond
Number
Initial Contract
Amount
Brief Description
of Change
Order(s) Where
Applicable
Total Cost of
Change Order(s)
per Bonded
Project
2. Bidder’s project management ability to at a minimum include:
a. The plan to manage the Master Agreement. Explain the ability to staff and operate the Roofing Supplies and Services, Waterproofing, and Related Products and Services.
b. Project management procedures and staffing. Also provide a detailed organizational chart stating job titles, responsibilities and number of years of experience for each person. Identify all key personnel, including but not limited to: principals, supervisory staff, and project superintendent to be assigned to the Master Agreement. Key personnel identified must also have an alternate, one of which shall be on-call at all times, throughout an awarded contract period.
c. Procedures by which key personnel assigned to a potential contract can be reached by the Lead Public Agency prior to and after the Master Agreement has been awarded.
d. Resumes of key personnel identified.
i. Racine County shall be notified in writing, of any change to the list of key personnel identified. This notification must include a current resume of the key personnel’s selected replacement. The replacement must meet all experience and other requirements set forth within this document. e. Current customer service/public relations program, down to the frontline crews and including sub-contractors (if applicable). Include examples of all training provided to your employees.
f. Quality Control Procedures to include process for ensuring quality. State how a plan will be developed for the work performed for Participating Public Agencies. Describe any quality problems your firm has documented in the past five (5) years.
g. A thorough discounted-cash-flow analysis of the long-term comparative value between your proposed re-roofing/replacement and alternative options, taking into consideration site-specific project conditions including labor rates, building height, project complexities, etc. h. A description for Bidder’s ability to provide integrated project delivery and incorporate various services; installation labor and related equipment and tools; materials; and supervision/construction management, including quality control and close-out procedures. If more than one entity will be responsible for fulfillment, describe all checks and balances designed into your delivery process to ensure the interests of all owners and third parties are aligned with those of the Participating Public Agencies, specifically, with their desire to achieve best services at the lowest available cost.
i. A description for Bidder’s ability to warranty a completed project and to provide ongoing inspections, condition assessments and maintenance services to help ensure its warranted service life. If more than one (1) entity will be responsible for fulfillment, describe all checks and balances designed into your delivery process to ensure the interests of all owners and third parties are aligned with those of the Participating Public Agencies, specifically, with their desire to achieve best services at the lowest available cost.
viii Evidence of financial ability by demonstrating a recent history of financial solvency and provide the following:
1. Financial Statement: Attach a financial statement, independently certified, to at a minimum include:
a. Latest balance sheet and income statement (stating the accounting method used) and showing Current Assets (e.g., cash, joint venture accounts, accounts receivable, notes receivable, accrued income, deposits, materials inventory and prepaid expenses); Net Fixed Assets; Other Assets; Current Liabilities (e.g., accounts payable, notes payable, accrued expenses, provision for income taxes, advances, accrued salaries and accrued payroll taxes); Other Liabilities (e.g., capital, capital stock, authorized and outstanding shares par values, earned surplus and retained earnings); b. Name and address of firm preparing attached financial statement, and date thereof.
c. Whether the Bidder has ever had a bankruptcy petition filed in its name, voluntarily or involuntarily. If yes, specify the date, circumstances, and resolution.
d. Whether the Bidder is currently in default on any loan agreement or financing agreement with any bank, financial institution, or other entity. If yes, specify all relevant details.
e. Current credit rating information including latest Dun and Bradstreet report.
2. Bonding Capacity: Indicate Bidder’s maximum bonding capability. Bidders must be capable of securing a Performance Bond up to $25,000,000 per project and aggregate program limit of $100,000,000.00. Bidders are required to provide a signed and notarized statement from a surety company authorized to transact business in all fifty (50) states.
3. AWARD
Utilizing the two-step process set forth herein, it is the intent of the County to award the Contract to the lowest responsive responsible Bidder provided the bid has been submitted in accordance with the requirements of the Contract Documents and does not exceed the funds available. Racine County reserves the right to make an award as deemed in its best interest, which may include awarding a bid to a single bidder or multiple bidders; or to award the whole bid, only part of the bid, or none of the bid to single or multiple bidders, based on its sole discretion of its best interest, together with compliance with applicable law. Intent to award will not be made and a contract will not be executed until Racine County, at its sole discretion, accepts a bid.
RACINE COUNTY RESERVES THE RIGHT TO REJECT ANY OR ALL BIDS AND TO
WAIVE ANY TECHNICALITY OR ERROR IN ANY BID OR PART THEREIN, AND TO
ACCEPT THE SAME OR COMBINATIONS, IN WHOLE OR IN PART, WHICHEVER IS
DEEMED TO BE IN THE BEST INTEREST OF RACINE COUNTY IN ITS SOLE AND EXCLUSIVE DISCRETION. While not all inclusive, the following items may be used when determining if a Bidder is considered responsive and responsible: work schedule, technical competency, ability to render satisfactory service, past performance, reputation for providing a quality product, timely delivery of products and/or services, financial ability, bonding, experience in performance of similar work, references, equipment, and capacity.
For the first step of the bidding process, Bidders will submit their sealed bid with all requested information, to include Certification of Vendor, and Attachment C – Bid Form, by the due date and time outlined in this IFB. After the due date and time, all Bidder’s will be evaluated to determine if they are responsive, responsible, and qualified. Each Bidder determined to be responsive, responsible, and qualified shall be deemed to be a “Responsible Bidder”.
For the second step of the bidding process, Racine County will distribute to each Responsible Bidder a Responsible Bidder’s Sample Project Form to determine which Responsible Bidder(s) constitute the lowest responsible bidder(s) when the bid responses are applied to an actual (hypothetical) project. When responding to the Sample Project Form, Responsible Bidder’s are required to USE THE SAME LINE ITEM PRICING from Attachment C – Bid Form and apply them to the Sample Projects Form to be supplied upon identification of a Responsible Bidder(s) in the first step; a reduction in price for the sample projects outlined in a Responsible Bidder’s Sample Project Form will not be allowable. The final basis for award and lowest responsible Bidder will result from the lowest total dollar amount of the combined sample projects.
4. TIE BIDS
If two (2) or more Bidders submit identical bids, the decision of the County to make award to one or more of such Bidders shall be final.
5. NOTICE OF ACCEPTANCE
Written notice of award to Bidder in the form of a letter and/or purchase order will be mailed to the address shown on the bid and will be considered sufficient notice of acceptance of bid.
CERTIFICATION OF VENDOR
Bid # PW19
ROOFING SUPPLIES AND SERVICES, WATERPROOFING, AND RELATED
PRODUCTS AND SERVICES
I fully understand the requirements of this bid and certify on behalf of my company that we can meet the requirements stated throughout this Invitation For Bid.
COMPANY: ________________________________________________________ TYPE/PRINT NAME: _________________________________________________ SIGNATURE:
TITLE:
ADDRESS:
CITY/STATE/ZIP:
TELEPHONE: FAX:
E-MAIL: DATE:
Bidder herein acknowledges receipt of the following:
Addendum Nos. __________________________
Attachment A – No Bid Form
Contractors who do no wish to bid do not need to return the entire bid package. Simply return this form to Racine County through Duane McKinney, Purchasing Coordinator at:
STATEMENT OF NO BID
SEALED BID NUMBER PW19
Roofing Supplies and Services, Waterproofing, and Related Products and Services
I do not wish to submit a bid on this solicitation.
_______________________________ _______________________________ Contractor Representative
Please indicate the reason(s) for your decision not to bid:
ATTACHMENT B
REQUIREMENTS FOR NATIONAL COOPERATIVE CONTRACT
TO BE ADMINISTERED BY
OMNIA PARTNERS
The following documents are used in evaluating and administering national cooperative contracts and are included for Supplier’s review and response.
OMNIA Partners Exhibit A – RESPONSE FOR NATIONAL COOPERATIVE CONTRACT OMNIA Partners Exhibit B – ADMINISTRATION AGREEMENT, EXAMPLE OMNIA Partners Exhibit C – PRINCIPAL PROCUREMENT AGENCY CERTIFICATE,
EXAMPLE
OMNIA Partners Exhibit D – FEDERAL FUNDS CERTIFICATIONS OMNIA Partners Exhibit E – NEW JERSEY BUSINESS COMPLIANCE OMNIA Partners Exhibit F – ADVERTISING COMPLIANCE REQUIREMENT
EXHIBIT A
RESPONSE FOR NATIONAL COOPERATIVE CONTRACT
1.0 Scope of National Cooperative Contract
Capitalized terms not otherwise defined herein shall have the meanings given to them in the Master Agreement or in the Administration Agreement between Supplier and OMNIA Partners.
1.1 Requirement
Racine County (hereinafter defined and referred to as “Principal Procurement Agency”), on behalf of itself and the National Intergovernmental Purchasing Alliance Company, a Delaware corporation d/b/a OMNIA Partners, Public Sector (“OMNIA Partners”), is requesting bids for Roofing Supplies and Services, Waterproofing, and Related Products and Services. The intent of this Invitation For Bid is any contract between Principal Procurement Agency and Supplier resulting from this Invitation For Bid (“Master Agreement”) be made available to other public agencies nationally, including state and local governmental entities, public and private primary, secondary and higher education entities, non-profit entities, and agencies for the public benefit (“Public Agencies”), through OMNIA Partners’ cooperative purchasing program. The Principal Procurement Agency has executed a Principal Procurement Agency Certificate with OMNIA Partners, an example of which is included as Exhibit C, and has agreed to pursue the Master Agreement. Use of the Master Agreement by any Public Agency is preceded by their registration with OMNIA Partners as a Participating Public Agency in OMNIA Partners’ cooperative purchasing program.
Registration with OMNIA Partners as a Participating Public Agency is accomplished by Public Agencies entering into a Master Intergovernmental Cooperative Purchasing Agreement, an example of which is attached as Exhibit A of the Response for National Cooperative Contract Exhibit. The terms and pricing established in the resulting Master Agreement between the Supplier and the Principal Procurement Agency will be the same as that available to Participating Public Agencies through OMNIA Partners.
All transactions, purchase orders, invoices, payments etc., will occur directly between the Supplier and each Participating Public Agency individually, and neither OMNIA Partners, any Principal Procurement Agency nor any Participating Public Agency, including their respective agents, directors, employees or representatives, shall be liable to Supplier for any acts, liabilities, damages, etc., incurred by any other Participating Public Agency. Supplier is responsible for knowing the tax laws in each state.
This Exhibit A, Response for National Cooperative Contract, defines the expectations for qualifying Suppliers based on OMNIA Partners’ requirements to market the resulting Master Agreement nationally to Public Agencies. Each section in this Exhibit A refers to the capabilities, requirements, obligations, and prohibitions of competing Suppliers on a national level in order to serve Participating Public Agencies through OMNIA Partners.
These requirements are incorporated into and are considered an integral part of this IFB. OMNIA Partners reserves the right to determine whether or not to make the Master Agreement awarded by the Principal Procurement Agency available to Participating Public Agencies, in its sole and absolute discretion, and any party submitting a response to this IFB acknowledges that any award by the Principal Procurement Agency does not obligate OMNIA Partners to make the Master Agreement available to Participating Procurement Agencies.
1.2 Marketing, Sales and Administrative Support
During the term of the Master Agreement OMNIA Partners intends to provide marketing, sales and administrative support for Supplier pursuant to this section that directly promotes the Supplier’s products and services to Participating Public Agencies
through multiple channels, each designed to promote specific products and services to Public Agencies on a national basis.
The OMNIA Partners marketing team will work in conjunction with Supplier to promote the Master Agreement to both existing Participating Public Agencies and prospective Public Agencies through channels that may include:
A. Marketing collateral (print, electronic, email, presentations) B. Website
C. Trade shows/conferences/meetings
D. Advertising
E. Social Media
The OMNIA Partners sales teams will work in conjunction with Supplier to promote the Master Agreement to both existing Participating Public Agencies and prospective Public Agencies through initiatives that may include:
A. Individual sales calls
B. Joint sales calls
C. Communications/customer service
D. Training sessions for Public Agency teams
E. Training sessions for Supplier teams
The OMNIA Partners contracting teams will work in conjunction with Supplier to promote the Master Agreement to both existing Participating Public Agencies and prospective Public Agencies through:
A. Serving as the subject matter expert for questions regarding joint powers authority and state statutes and regulations for cooperative purchasing B. Training sessions for Public Agency teams
C. Training sessions for Supplier teams
D. Regular business reviews to monitor program success
E. General contract administration
Suppliers are required to pay an administrative fee under this Invitation For Bid; see Article 5, Section 5.1 of Exhibit B for more details. Supplier will be required to execute the OMNIA Partners Administration Agreement (Exhibit B).
1.3 Estimated Volume
The dollar volume purchased under the Master Agreement is estimated to be approximately $200M annually. While no minimum volume is guaranteed to Supplier, the estimated annual volume is projected based on the current annual volumes among the Principal Procurement Agency, other Participating Public Agencies that are anticipated to utilize the resulting Master Agreement to be made available to them through OMNIA Partners, and volume growth into other Public Agencies through a coordinated marketing approach between Supplier and OMNIA Partners.
1.4 Award Basis
The basis of any contract award resulting from this IFB made by Principal Procurement Agency will, at OMNIA Partners option, be the basis of award on a national level through OMNIA Partners. If multiple Suppliers are awarded by Principal Procurement Agency under the Master Agreement, those same Suppliers will be required to extend the Master Agreement to Participating Public Agencies through OMNIA Partners. Utilization of the Master Agreement by Participating Public Agencies will be at the discretion of the individual Participating Public Agency.
Certain terms of the Master Agreement specifically applicable to the Principal Procurement Agency are subject to modification for each Participating Public Agency as Supplier, such Participating Public Agency and OMNIA Partners shall agree.
Participating Agencies may request to enter into a separate supplemental agreement to further define the level of service requirements over and above the minimum defined in the Master Agreement (i.e. invoice requirements, order requirements, specialized delivery, diversity requirements such as minority and woman owned businesses, historically underutilized business, governing law, etc.). It shall be the responsibility of the Supplier to comply, when applicable, with the prevailing wage legislation in effect in the jurisdiction of the Participating Agency. It shall further be the responsibility of the Supplier to monitor the prevailing wage rates as established by the appropriate department of labor for any increase in rates during the term of this contract and adjust wage rates accordingly. Any supplemental agreement developed as a result of the Master Agreement is exclusively between the Participating Agency and the Supplier (Contract Sales are reported to OMNIA Partners).
All purchase orders issued and accepted by the Supplier may survive expiration or termination of the Master Agreement. Participating Agencies’ purchase orders may exceed the term of the Contract if the purchase order is issued prior to the expiration of the Contract. Supplier is responsible for reporting all sales and paying the applicable administrative fee for sales that use the Master Agreement as the basis for the purchase order, even though Master Agreement may have expired.
1.5 Objectives of Cooperative Program
This IFB is intended to achieve the following objectives regarding availability through OMNIA Partners’ cooperative program:
A. Provide a comprehensive competitively solicited and awarded national agreement offering the Products covered by this solicitation to Participating Public Agencies; B. Establish the Master Agreement as the Supplier’s primary go to market strategy to Public Agencies nationwide;
C. Achieve cost savings for Supplier and Public Agencies through a single solicitation process that will reduce the Supplier’s need to respond to multiple solicitations and Public Agencies need to conduct their own solicitation process; D. Combine the aggregate purchasing volumes of Participating Public Agencies to achieve cost effective pricing.
2.0 REPRESENTATIONS AND COVENANTS
As a condition to Supplier entering into the Master Agreement, which would be available to all Public Agencies, Supplier must make certain representations, warranties and covenants to both the Principal Procurement Agency and OMNIA Partners designed to ensure the success of the Master Agreement for all Participating Public Agencies as well as the Supplier.
2.1 Corporate Commitment
Supplier commits that (1) the Master Agreement has received all necessary corporate authorizations and support of the Supplier’s executive management, (2) the Master Agreement is Supplier's primary “go to market” strategy for Public Agencies, (3) the Master Agreement will be promoted to all Public Agencies, including any existing customers, and Supplier will transition existing customers, upon their request, to the Master Agreement, and (4) that the Supplier has read and agrees to the terms and conditions of the Administration Agreement with OMNIA Partners and will execute such agreement concurrent with and as a condition of its execution of the Master Agreement with the Principal Procurement Agency. Supplier will identify an executive corporate sponsor and a separate national account manager within the IFB response that will be responsible for the overall management of the Master Agreement.
2.2 Pricing Commitment
Supplier commits the not-to-exceed pricing provided under the Master Agreement pricing is its lowest available (net to buyer) to Public Agencies nationwide and further commits that if a Participating Public Agency is eligible for lower pricing through a national, state, regional or local or cooperative contract, the Supplier will match such lower pricing to that Participating Public Agency under the Master Agreement.
2.3 Sales Commitment
Supplier commits to aggressively market the Master Agreement as its go to market strategy in this defined sector and that its sales force will be trained, engaged and committed to offering the Master Agreement to Public Agencies through OMNIA Partners nationwide. Supplier commits that all Master Agreement sales will be
accurately and timely reported to OMNIA Partners in accordance with the OMNIA Partners Administration Agreement. Supplier also commits its sales force will be compensated, including sales incentives, for sales to Public Agencies under the Master Agreement in a consistent or better manner compared to sales to Public Agencies if the Supplier were not awarded the Master Agreement.
3.0 SUPPLIER RESPONSE
Supplier must supply the following information in order for the Principal Procurement Agency to determine Supplier’s qualifications to extend the resulting Master Agreement to Participating Public Agencies through OMNIA Partners.
3.1 Company
A. Brief history and description of Supplier.
B. Total number and location of sales persons employed by Supplier.
C. Number and location of support centers (if applicable) and location of corporate office.
D. Annual sales for the three previous fiscal years.
E. Submit FEIN and Dunn & Bradstreet report.
F. Describe any green or environmental initiatives or policies.
G. Describe any diversity programs or partners supplier does business with and how Participating Agencies may use diverse partners through the Master Agreement.
Indicate how, if at all, pricing changes when using the diversity program.
H. Describe any historically underutilized business certifications supplier holds and the certifying agency. This may include business enterprises such as minority and women owned, small or disadvantaged, disable veterans, etc.
I. Describe how supplier differentiates itself from its competitors.
J. Describe any present or past litigation, bankruptcy or reorganization involving supplier.
K. Felony Conviction Notice: Indicate if the supplier
a. is a publicly held corporation and this reporting requirement is not applicable;
b. is not owned or operated by anyone who has been convicted of a felony; or c. is owned or operated by and individual(s) who has been convicted of a felony and provide the names and convictions.
L. Describe any debarment or suspension actions taken against supplier
3.2 Distribution, Logistics
A. Describe the full line of products and services offered by supplier.
B. Describe how supplier proposes to distribute the products/service nationwide.
Include any states where products and services will not be offered under the Master Agreement, including U.S. Territories and Outlying Areas.
C. Identify all other companies that will be involved in processing, handling or shipping the products/service to the end user.
D. Provide the number, size and location of Supplier’s distribution facilities, warehouses and retail network as applicable.
3.3 Marketing and Sales
A. Provide a detailed ninety-day plan beginning from award date of the Master Agreement describing the strategy to immediately implement the Master Agreement as supplier’s primary go to market strategy for Public Agencies to supplier’s teams nationwide, to include, but not limited to:
i. Executive leadership endorsement and sponsorship of the award as the public sector go-to-market strategy within first 10 days ii. Training and education of Supplier’s national sales force with participation from the Supplier’s executive leadership, along with the OMNIA Partners team within first 90 days
B. Provide a detailed ninety-day plan beginning from award date of the Master Agreement describing the strategy to market the Master Agreement to current Participating Public Agencies, existing Public Agency customers of Supplier, as well as to prospective Public Agencies nationwide immediately upon award, to include, but not limited to:
i. Creation and distribution of a co-branded press release to trade publications ii. Announcement, contract details and contact information published on the Supplier’s website within first 90 days
iii. Design, publication and distribution of co-branded marketing materials within first 90 days
iv. Commitment to attendance and participation with OMNIA Partners at national (i.e. NIGP Annual Forum, NPI Conference, etc.), regional (i.e.
Regional NIGP Chapter Meetings, Regional Cooperative Summits, etc.) and supplier-specific trade shows, conferences and meetings throughout the term of the Master Agreement
v. Commitment to attend, exhibit and participate at the NIGP Annual Forum in an area reserved by OMNIA Partners for partner suppliers. Booth space will be purchased and staffed by Supplier. In addition, Supplier commits to provide reasonable assistance to the overall promotion and marketing efforts for the NIGP Annual Forum, as directed by OMNIA Partners. vi. Design and publication of national and regional advertising in trade publications throughout the term of the Master Agreement vii. Ongoing marketing and promotion of the Master Agreement throughout its term (case studies, collateral pieces, presentations, promotions, etc.) viii. Dedicated OMNIA Partners internet web-based homepage on Supplier’s website with:
x OMNIA Partners standard logo;
x Copy of original Invitation For Bid;
x Copy of contract and amendments between Principal Procurement Agency and Supplier;
x Summary of Products and pricing;
x Marketing Materials
x Electronic link to OMNIA Partners’ website including the online registration page;
x A dedicated toll-free number and email address for OMNIA Partners
C. Describe how Supplier will transition any existing Public Agency customers’ accounts to the Master Agreement available nationally through OMNIA Partners.
Include a list of current cooperative contracts (regional and national) Supplier holds and describe how the Master Agreement will be positioned among the other cooperative agreements.
D. Acknowledge Supplier agrees to provide its logo(s) to OMNIA Partners and agrees to provide permission for reproduction of such logo in marketing communications and promotions. Acknowledge that use of OMNIA Partners logo will require permission for reproduction, as well.
E. Confirm Supplier will be proactive in direct sales of Supplier’s goods and services to Public Agencies nationwide and the timely follow up to leads established by OMNIA Partners. All sales materials are to use the OMNIA Partners logo. At a minimum, the Supplier’s sales initiatives should communicate:
i. Master Agreement was competitively solicited and publicly awarded by a Principal Procurement Agency
ii. Best government pricing
iii. No cost to participate
iv. Non-exclusive
F. Confirm Supplier will train its national sales force on the Master Agreement. At a minimum, sales training should include:
i. Key features of Master Agreement
ii. Working knowledge of the solicitation process
iii. Awareness of the range of Public Agencies that can utilize the Master Agreement through OMNIA Partners
iv. Knowledge of benefits of the use of cooperative contracts G. Provide the name, title, email and phone number for the person(s), who will be responsible for:
i. Executive Support
ii. Marketing
iii. Sales
iv. Sales Support
v. Financial Reporting
vi. Accounts Payable
vii. Contracts
+ Describe in detail how Supplier’s national sales force is structured, including contact information for the highest-level executive in charge of the sales team. , Explain in detail how the sales teams will work with the OMNIA Partners team to implement, grow and service the national program.
- ([SODLQLQGHWDLOKRZ6XSSOLHUZLOOPDQDJHWKHRYHUDOOQDWLRQDOSURJUDP WKURXJKRXWWKHWHUPRIWKH0DVWHU$JUHHPHQWLQFOXGLQJRQJRLQJFRRUGLQDWLRQRI PDUNHWLQJDQGVDOHVHIIRUWVWLPHO\QHZ3DUWLFLSDWLQJ3XEOLF$JHQF\DFFRXQWVHW XSWLPHO\FRQWUDFWDGPLQLVWUDWLRQHWF
. 6WDWHWKHDPRXQWRI6XSSOLHU¶V3XEOLF$JHQF\VDOHVIRUWKHSUHYLRXVILVFDO\HDU 3URYLGHDOLVWRI6XSSOLHU¶VWRS3XEOLF$JHQF\FXVWRPHUVWKHWRWDOSXUFKDVHV IRUHDFKIRUWKHSUHYLRXVILVFDO\HDUDORQJZLWKDNH\FRQWDFWIRUHDFK / 'HVFULEH6XSSOLHU¶VLQIRUPDWLRQV\VWHPVFDSDELOLWLHVDQGOLPLWDWLRQVUHJDUGLQJ RUGHUPDQDJHPHQWWKURXJKUHFHLSWRISD\PHQWLQFOXGLQJGHVFULSWLRQRIPXOWLSOH SODWIRUPVWKDWPD\EHXVHGIRUDQ\RIWKHVHIXQFWLRQV
0 M. Provide the Contract Sales (as defined in Section 10 of the OMNIA Partners, Public Sector Administration Agreement) that Supplier will guarantee each year under the Master Agreement for the initial three years of the Master Agreement (“Guaranteed Contract Sales”).
$_______.00 in year one
$_______.00 in year two
$_______.00 in year three
To the extent Supplier guarantees minimum Contract Sales, the administration fee shall be calculated based on the greater of the actual Contract Sales and the Guaranteed Contract Sales.
L Respond with Master Agreement pricing (Contract Sales reported to OMNIA Partners).
1 (YHQWKRXJKLWLVDQWLFLSDWHGPDQ\3XEOLF$JHQFLHVZLOOEHDEOHWRXWLOL]HWKH0DVWHU $JUHHPHQWZLWKRXW IXUWKHU IRUPDOVROLFLWDWLRQWKHUHPD\EHFLUFXPVWDQFHVZKHUH 3XEOLF $JHQFLHV ZLOO LVVXH WKHLU RZQ VROLFLWDWLRQV 7KH IROORZLQJ RSWLRQV DUH DYDLODEOHZKHQUHVSRQGLQJWRDVROLFLWDWLRQIRU3URGXFWVFRYHUHGXQGHUWKH0DVWHU $JUHHPHQW
ii. If competitive conditions require pricing lower than the standard Master Agreement not-to-exceed pricing, Supplier may respond with lower pricing through the Master Agreement. If Supplier is awarded the contract, the sales are reported as Contract Sales to OMNIA Partners under the Master Agreement.
iii. Respond with pricing higher than Master Agreement only in the unlikely event that the Public Agency refuses to utilize Master Agreement (Contract Sales are not reported to OMNIA Partners). iv. If alternative or multiple bids or proposals are permitted, respond with pricing higher than Master Agreement, and include Master Agreement as the alternate or additional bid.
Detail Supplier’s strategies under these options when responding to a solicitation.
EXHIBIT B
ADMINISTRATION AGREEMENT, EXAMPLE
ADMINISTRATION AGREEMENT
This ADMINISTRATION AGREEMENT (“Agreement”) is made as of , by and between National Intergovernmental Purchasing Alliance Company, a Delaware corporation d/b/a OMNIA Partners, Public Sector (“OMNIA Partners, Public Sector”)and (“Supplier”).
RECITALS
WHEREAS, (“Lead Public Agency”) has entered into a certain Master Agreement dated as of even date herewith, referenced asAgreement No. , by and between Lead Public Agency and Supplier (as amended from time to time in accordance with the terms thereof, the “Master Agreement”) for the purchase of (the “Products and Services”); WHEREAS, the Master Agreement provides that any state, county, city, special district, local government, school district, private K-12 school, technical or vocational school, higher education institution (including community colleges, colleges and universities, both public and private), other government agency or nonprofit organization (each a “Public Agency” and collectively, “Public Agencies”) may purchase Products and Services at the prices indicated in the Master Agreement upon prior registration with OMNIA Partners Public Sector, in which case the Public Agency becomes a “Participating Public Agency”;
WHEREAS, OMNIA Partners Public Sector has the administrative and legal capacity to administer purchases under the Master Agreement to Participating Public Agencies; WHEREAS, OMNIA Partners Public Sector serves in an administrative capacity for Lead Public Agency and other lead public agencies in connection with other master agreements offered by OMNIA Partners Public Sector;
WHEREAS, Lead Public Agency desires OMNIA Partners Public Sector to proceed with administration of the Master Agreement on the same basis as other master agreements; WHEREAS, OMNIA Partners Public Sector and Supplier desire to enter into this Agreement to make available the Master Agreement to Participating Public Agencies.
NOW, THEREFORE, in consideration of the mutual covenants contained in this Agreement, OMNIA Partners Public Sector and Supplier hereby agree as follows:
ARTICLE I
GENERAL TERMS AND CONDITIONS
1.1 The Master Intergovernmental Cooperative Purchasing Agreement (“Master Agreement”), attached hereto as Exhibit A and incorporated herein by reference as though fully set forth herein, and the terms and conditions contained therein shall apply to this Agreement except as expressly changed or modified by this Agreement.
1.2 OMNIA Partners Public Sector shall be afforded all of the rights and privileges afforded to Lead Public Agency under the Master Agreement, and such rights and privileges shall accrue and apply with equal effect to OMNIA Partners Public Sector under this Agreement including, without limitation, Supplier’s obligation to provide insurance to Lead Public Agency.
1.3 Supplier shall perform all duties, responsibilities and obligations required under the Master Agreement.
1.4 OMNIA Partners Public Sector shall perform all of its duties, responsibilities and obligations as administrator of purchases under the Master Agreement as set forth herein, and Supplier acknowledges that OMNIA Partners Public Sector shall act in the capacity of administrator of purchases under the Master Agreement.
1.5 With respect to any purchases made by Lead Public Agency or any Participating Public Agency pursuant to the Master Agreement, OMNIA Partners PublicSector:
(a) shall not be construed as a dealer, re-marketer, representative, partner, or agent of any type of Supplier, Lead Public Agency or such Participating Public Agency; (b) shall not be obligated, liable or responsible (i) for any orders made by Lead PublicAgency, any Participating Public Agency or any employee of Lead Public Agency or a Participating Public Agency under the Master Agreement, or (ii) for any payments required to be made with respect tosuch order; and
(c) shall not be obligated, liable or responsible for any failure by a Participating Public Agency to (i) comply with procedures or requirements of applicable law or ordinance, or (ii) obtain the due authorization and approval necessary to purchase under the Master Agreement.
OMNIA Partners Public Sector makes no representations or guaranties with respect to any minimum purchases required to be made by Lead Public Agency, any Participating Public Agency, or any employee of Lead Public Agency or a Participating Public Agency under the Master Agreement.
ARTICLE II
TERM OF AGREEMENT
2.1 This Agreement is effective as of and shall terminate upon termination of the Master Agreement or any earlier termination in accordance with the terms of this Agreement, provided,however, that the obligation to pay all amounts owed by Supplier to OMNIA Partners Public Sector through the termination of this Agreement and all indemnifications afforded by Supplier to OMNIA Partners Public Sector shall survive the term of thisAgreement.
ARTICLE III
REPRESENTATIONS AND COVENANTS
3.1 OMNIA Partners Public Sector views the relationship with Supplier as an opportunity to provide benefits to the Lead Public Agency, Public Agencies and Supplier. The successful foundation of the relationship requires certain representations and covenants from both OMNIA Partners Public Sector andSupplier.
3.2 OMNIA Partners Public Sector’ Representations and Covenants. (a) Marketing. OMNIA Partners Public Sector shall proactively market the Master Agreement to Public Agencies using resources available to it from time to time, which may include an national, regional and state-level sponsors. In addition, the OMNIA Partners Public Sector staff shall make commercially reasonable efforts to enhance Supplier’s marketing efforts through meetings with Public Agencies, participation in key events and tradeshows and other marketing activity such as advertising, articles and promotionalcampaigns. (b) Training and Knowledge Management Support. OMNIA Partners Public Sector shall provide support for the education, training and engagement of Supplier’s sales force as provided herein. Through its staff (each, a “Program Manager” and collectively, the “Program Managers”), OMNIA Partners Public Sector shall, with scheduling assistance from Supplier, conduct training sessions and conduct calls jointly with Supplier to Public Agencies. OMNIA Partners Public Sector shall also provide Supplier with access to OMNIA Partners Public Sector’s private intranet website which provides presentations, documents and information to assist Supplier’s sales force in effectively promoting the Master Agreement.
3.3 Supplier’s Representations and Covenants. Supplier hereby represents and covenants as follows in order to ensure that Supplier is providing the highest level of public benefit to Participating Public Agencies (such representations and covenants are sometimes referred to as “Supplier’s Commitments” and are comprised of the Corporate Commitment, Pricing Commitment, Economy Commitment and SalesCommitment):
(a) Corporate Commitment.
(i) The pricing, terms and conditions of the Master Agreement shall, at all times, be Supplier’s primary contractual offering of Products and Services to Public Agencies. All of Supplier’s direct and indirect marketing and sales efforts to Public Agencies shall demonstrate that the Master Agreement is Supplier’s primary offering and not just one of Supplier’s contract options. (ii) Supplier’s sales force (including inside, direct and/or authorized dealers, distributors and representatives) shall always present the Master Agreement when marketing Products or Services to PublicAgencies.
(iii) Supplier shall advise all Public Agencies that are existing customers of Supplier as to the pricing and other value offered through the Master Agreement. (iv) Upon authorization by a Public Agency, Supplier shall transition such Public Agency to the pricing, terms and conditions of the Master Agreement. (v) Supplier shall ensure that the OMNIA Partners Public Sector program and the Master Agreement are actively supported by Supplier’s seniorexecutive management.
(vi) Supplier shall provide a national/senior management level representative with the authority and responsibility to ensure that the Supplier’s Commitments are maintained at all times. Supplier shall also designate a lead referral contact person who shall be responsible for receiving communications from OMNIA Partners Public Sector concerning new Participating Public Agency registrations and for ensuring timely follow-up by Supplier’s staff to requests for contact from Participating Public Agencies. Supplier shall also provide the personnel necessary to implement and support a supplier-based internet web page dedicated to Supplier’s OMNIA Partners Public Sector program and linked to OMNIA Partners Public Sector’s website and shall implement and support such web page.
(vii) Supplier shall demonstrate in its procurement solicitation response and throughout the term of the Master Agreement that national/senior management fully supports the OMNIA Partners Public Sector program and its commitments and requirements. National/Senior management is defined as the executive(s) with companywideauthority. (viii) Where Supplier has an existing contract for Products and Services with a state, Supplier shall notify the state of the Master Agreement and transition the state to the pricing, terms and conditions of the Master Agreement upon the state’s request. Regardless of whether the state decides to transition to the Master Agreement, Supplier shall primarily offer the Master Agreement to all Public Agencies located within thestate.
(b) Pricing Commitment.
(i) Supplier represents to OMNIA Partners Public Sector that the pricing offered under the Master Agreement is the lowest overall available pricing (net to purchaser) on Products and Services that it offers to Public Agencies. Supplier’s pricing shall be evaluated on either an overall project basis or the Public Agency’s actual usage for more frequently purchased Products and Services. (ii) Contracts Offering Lower Prices. If a pre-existing contract and/or a Public Agency’s unique buying pattern provide one or more Public Agencies a lower price than that offered under the Master Agreement, Supplier shall match that lower pricing under the Master Agreement and inform the eligible Public Agencies that the lower pricing is available under the Master Agreement.
If an eligible Public Agency requests to be transitioned to the Master Agreement, Supplier shall do so and report the Public Agency’s purchases made under the Master Agreement going forward. The price match only applies to the eligible Public Agencies. Below are three examples of Supplier’s obligation to match the pricing under Supplier’s contracts offering lower prices. (A) Supplier holds a state contract with lower pricing that is available to all Public Agencies within the state. Supplier would be required to match the lower state pricing under the Master Agreement and make it available to all Public Agencies within the state.
(B) Supplier holds a regional cooperative contract with lower pricing that is available only to the ten cooperative members. Supplier would be required to match the lower cooperative pricing under the Master Agreement and make it available to the ten cooperative members.
(C) Supplier holds a contract with an individual Public Agency. The Public Agency contract does not contain any cooperative language and therefore other Public Agencies are not eligible to utilize the contract. Supplier would be required to match the lower pricing under the Master Agreement and make it available only to the individual Public Agency.
(iii) Deviating Buying Patterns. Occasionally OMNIA Partners Public Sector and Supplier may interact with a Public Agency that has a buying pattern or terms and conditions that considerably deviate from the normal Public Agency buying pattern and terms and conditions, and causes Supplier’s pricing under the Master Agreement to be higher than an alternative contract held by Supplier. This could be created by a unique end-user preference or requirements. In the event that this situation occurs, Supplier may address the issue by lowering the price under the Master Agreement on the item(s) causing the large deviation for that Public Agency. Supplier would not be required to lower the price for other PublicAgencies.
(iv) Supplier’s Options in Responding to a Third Party Procurement Solicitation. While it is the objective of OMNIA Partners Public Sector to encourage Public Agencies to piggyback on to the Master Agreement rather than issue their own procurement solicitations, the Parties recognizes that for various reasons some Public Agencies will issue their own solicitations. The following options are available to Supplier when responding to a Public Agency solicitation:
(A) Supplier may opt not to respond to the procurement solicitation.
Supplier may make the Master Agreement available to the Public Agency as a comparison to its solicitation responses.
(B) Supplier may respond with the pricing, terms and conditions of the Master Agreement. If Supplier is awarded the contract, the sales would be reported as sales under the Master Agreement.
(C) If competitive conditions require pricing lower than the standard Master Agreement pricing, Supplier may submit lower pricing through the Master Agreement. If Supplier is awarded the contract, the sales would be reported as sales under the Master Agreement. Supplier would not be required to extend the lower price to otherPublic Agencies. (D) Supplier may respond to the procurement solicitation with pricing that is higher (net to buyer) than the pricing offered under the Master Agreement. If awarded a contract, Supplier shall still be bound by all obligations set forth in this Section 3.3, including, without limitation, the requirement to continue to advise the awarding Public Agency of the pricing, terms and conditions of the Master Agreement. (E) Supplier may respond to the procurement solicitation with pricing that is higher (net to buyer) than the pricing offered under the Master Agreement and if an alternative response is permitted, Supplier may offer the pricing under the Master Agreement as an alternative forconsideration.
(c) Economy Commitment. Supplier shall demonstrate the benefits, including the pricing advantage, of the Master Agreement over alternative options, including competitive solicitation pricing and shall proactively offer the terms and pricing under the Master Agreement to Public Agencies as a more effective alternative to the cost and time associated with such alternate bids and solicitations. (d) Sales Commitment. Supplier shall market the Master Agreement through Supplier’s sales force or dealer network that is properly trained, engaged and committed to offering the Master Agreement as Supplier’s primary offering to Public Agencies. Supplier’s sales force compensation and incentives shall be greater than or equal to the compensation and incentives earned under other contracts to PublicAgencies.
(i) Supplier Sales. Supplier shall be responsible for proactive sales of Supplier’s Products and Services to Public Agencies and the timely follow-up to sales leads identifiedby OMNIA Partners Public Sector. Use of product catalogs, targeted advertising, direct mail, online marketing and other sales initiatives are encouraged. All of Supplier’s sales materials targeted towards Public Agencies shall include the OMNIA Partners Public Sector logo. OMNIA Partners Public Sector hereby grants to Supplier, during the term of this Agreement, a non-exclusive, revocable, nontransferable, license to use the OMNIA Partners Public Sector name, trademark, and logo solely to perform its obligations under this Agreement, and for no other purpose. Any goodwill, rights, or benefits derived from Supplier's use of the OMNIA Partners Public Sector name, trademark, or logo shall inure to the benefit of OMNIA Partners Public Sector. OMNIA Partners Public Sector shall provide Supplier with its logo and the standards to be employed in the use of the logo. During the term of the Agreement, the Supplier shall provide OMNIA Partners Public Sector with its logo and the standards to be employed in the use of the logo for purposes of reproducing and using Supplier’s name and logo in connection with the advertising, marketing and promotion of the Master Agreement to Public Agencies. Supplier shall assist OMNIA Partners Public Sector by providing camera-ready logos and by participating in related trade shows and conferences. At a minimum, Supplier's sales initiatives shall communicate that (i) the Master Agreement was competitively solicited by the Lead Public Agency, (ii) the Master Agreement provides the Supplier’s best overall pricing and value to eligible agencies, (iii) there is no cost to Participating Public Agencies, and (iv) the Master Agreement is a non-exclusive contract. (ii) Branding and Logo Compliance. Supplier shall be responsible for complying with the OMNIA Partners Public Sector branding and logo standards and guidelines. Prior to use by Supplier, all OMNIA Partners Public Sector related marketing material must be submitted to OMNIA Partners Public Sector for review andapproval. (iii) Sales Force Training. Supplier shall train its national sales force on the Master Agreement and OMNIA Partners Public Sector program. OMNIA Partners Public Sector shall be available to train on a national, regional or local level and generally assist with the education of salespersonnel.
(iv) Participating Public Agency Access. Supplier shall establish the following communication links to facilitate customer access and communication:
(A) A dedicated OMNIA Partners Public Sector internet webbasedhomepage that is accessible from Supplier’s homepage or main menu navigation containing:
(1) OMNIA Partners Public Sector standardlogo;
(2) Copy of original procurementsolicitation;
(3) Copy of Master Agreement including any amendments;
(4) Summary of Products and Servicespricing;
(5) Electronic link to OMNIA Partners Public Sector’s
online registration page; and
(6) Other promotional material as requested by
OMNIA Partners Public Sector.
(B) A dedicated toll-free national hotline for inquiries regarding OMNIA Partners Public Sector.
(v) Electronic Registration. Supplier shall be responsible for ensuring that each Public Agency has completed OMNIA Partners Public Sector’s online registration process prior to processingthe Public Agency’s first sales order.
(vi) Supplier’s Performance Review. Upon request by OMNIA Partners Public Sector, Supplier shall participate in a performance review meeting with OMNIA Partners Public Sector to evaluateSupplier’s performance of the covenants set forth in thisAgreement. (vii) Supplier Content. Supplier may, from time to time, provide certain graphics, media, and other content to OMNIA Partners Public Sector (collectively "Supplier Content") for use on OMNIA Partners Public Sector websites and for general marketing and publicity purposes.
During the term of the Agreement, Supplier hereby grants to OMNIA Partners Public Sector and its affiliates a non-exclusive, worldwide, free, transferrable, license to reproduce, modify, distribute, publicly perform, publicly display, and use Supplier Content in connection with OMNIA Partners Public Sector websites and for general marketing and publicity purposes, with the right to sublicense each and every such right. Supplier warrants that: (a) Supplier is the owner of or otherwise has the unrestricted right to grant the rights in and to Supplier Content as contemplated hereunder; and (b) the use of Supplier Content and any other materials or services provided to OMNIA Partners Public Sector as contemplated hereunder will not violate, infringe, or misappropriate the intellectual property rights or other rights of any third party
3.4 Breach of Supplier’s Representations and Covenants. The representations and covenants set forth in this Agreement are the foundation of the relationship between OMNIA Partners Public Sector and Supplier. If Supplier is found to be in violation of, or non-compliance with, one or more of the representations and covenants set forth in this Agreement, Supplier shall have ninety (90) days from the notice of default to cure such violation or non-compliance and, if Supplier fails to cure such violation or non-compliance within such notice period, at the sole discretion of OMNIA Partners Public Sector, it shall be deemed a cause for immediate termination of the Master Agreement at Lead Public Agency’s sole discretion or this Agreement at OMNIA Partners Public Sector’s sole discretion.
3.5 Indemnity. Supplier hereby agrees to indemnify and defend OMNIA Partners Public Sector, and its parent companies, subsidiaries, affiliates, shareholders, member, manager, officers, directors, employees, agents, and representatives from and against any and all claims, costs, proceedings, demands, losses, damages, and expenses (including, without limitation, reasonable attorney's fees and legal costs) of any kind or nature, arising from or relating to, any actual or alleged breach of any of Supplier's representations, warranties, or covenants inthis Agreement.
ARTICLE IV
PRICING AUDITS
4.1 Supplier shall,atSupplier’s sole expense,maintain an accounting of all purchases made by Lead Public Agency and Participating Public Agencies under the Master Agreement.
OMNIA Partners Public Sector and Lead Public Agency each reserve the right to audit the accounting for a period of three (3) years from the time such purchases are made. This audit right shall survive termination of this Agreement for a period of one (1) year from the effective date of termination. OMNIA Partners Public Agencies shall have the authority to conduct random audits of Supplier’s pricing that is offered to Participating Public Agencies at OMNIA Partners Public Sector’s sole cost and expense. In addition, in the event that OMNIA Partners Public Sector is made aware of any pricing being offered to three (3) or more Participating Public Agencies that is materially inconsistent with the pricing under the Master Agreement, OMNIA Partners Public Sector shall have the right to conduct a reasonable audit of Supplier’s pricing at Supplier’s sole cost and expense during regular business hours and upon reasonable notice. OMNIA Partners Public Sector may conduct the audit internally or may engage a third-party auditing firm. Supplier shall solely be UHVSRQVLEOHIRUWKHFRVW
of the audit. Inthe event of an audit, the requestedmaterials shall be providedin the format and atthe locationwhere kept in the ordinary course ofbusinessbySupplier.
ARTICLE V
FEES & REPORTING
5.1 Administrative Fees. Supplier shall pay to OMNIA Partners Public Sector a monthly administrative fee based upon the total sales price of all purchases shipped and billed pursuant to the Master Agreement, excluding taxes, in the amount of three percent (3%) of aggregate purchases made during each calendar month (individually and collectively, “Administrative Fees”). Supplier’s annual sales shall be measured on a calendar year basis. All Administrative Fees shall be payable in U.S.
Dollars and shall be made by wire to OMNIA Partners Public Sector, or its designee or trustee as may be directed in writing by OMNIA Partners Public Sector. Administrative Fees shall be due and payable within thirty (30) days of the end of each calendar month for purchases shipped and billed during such calendar month. OMNIA Partners Public Sector agrees to pay to Lead Public Agency five percent (5%) of all Administrative Fees received from Supplier to help offset Lead Public Agency’s costs incurred in connection with managing the Master Agreement nationally. The Supplier’s obligations to pay Administrative Fees based on aggregate purchases calculated and accrued during the term of the Agreement shall survive the termination of the Agreement and the Master Agreement, regardless of reason for the termination.
5.2 Sales Reports. Within thirty (30) days of the end of each calendar month, Supplier shall deliver to OMNIA Partners Public Sector an electronic accounting report, in the format prescribed by the Contract Sales Reporting Template, attached hereto as Exhibit B, summarizing all purchases made under the Master Agreement during such calendar month (“Sales Report”). All purchases indicated in the Sales Report shall be denominated in U.S. Dollars. All purchases shipped and billed pursuant to the Master Agreement for the applicable calendar month shall be included in the Sales Report. Submitted reports shall be verified by OMNIA Partners Public Sector against its registration database. Any data that is inconsistent with the registration database shall be changed prior to processing. OMNIA Partners Public Sector reserves the right upon reasonable advance notice to Supplier to change the prescribed report format to accommodate the distribution of the Administrative Fees to its program sponsors, state associations and/or Lead Agencies.
5.3 Exception Reporting/Sales Reports Audits. OMNIA Partners Public Sector or its designee may, at its sole discretion, compare Supplier’s Sales Reports with Participating Public Agency records or other sales analysis performed by Participating Public Agencies, sponsors, or OMNIA Partners Public Sector staff. If there is a material discrepancy between the Sales Report and such records or sales analysis as determined by OMNIA Partners Public Sector, OMNIA Partners Public Sector shall notify Supplier in writing and Supplier shall have thirty (30) days from the date of such notice to resolve the discrepancy to OMNIA Partners Public Sector’s reasonable satisfaction. Upon resolution of the discrepancy, Supplier shall remit payment to OMNIA Partners Public Sector’s trustee within fifteen (15) calendar days. Any questions regarding an exception report should be directed to OMNIA Partners Public Sector in writing. If Supplier does not resolve the discrepancy to OMNIA Partners Public Sector’s reasonable satisfaction within thirty (30) days, OMNIA Partners Public Sector shall have the right to engage outside services to conduct an independent audit of Supplier’s reports. Supplier shall solely be responsible for the cost of the audit.
5.4 Online Reporting. Within forty-five (45) days of the end of each calendar month, OMNIA Partners Public Sector shall provide online reporting to Supplier containing Supplier’s sales reporting for such calendar month. Supplier shall have access to various reports through the OMNIA Partners Public Sector intranet website. Such reports are useful in resolving reporting issues and
enabling Supplier to better manage its Master Agreement.
5.5 Usage Reporting. Within thirty (30) days of the end of each contract year, Supplier shall deliver to OMNIA Partners Public Sector an electronic usage report of all sales under the Master Agreement, including:
(i) Supplier’s Product Number
(ii) Product Description
(iii) Manufacturer Name
(iv) Manufacturer Number
(v) Unit of Measure
(vi) OMNIA Partners Public SectorPrice
(vii) Number of times ordered
(viii) Units sold
(ix) Sales by Manufacturer
5.6 Supplier’s Failure to Provide Reports or Pay Administrative Fees. Failure to provide a Sales Report or pay Administrative Fees within the time and in the manner specified herein shall be regarded as a material breach under this Agreement and if not cured within thirty (30) days of written notice to Supplier, shall be deemed a cause for termination of the Master Agreement at Lead Public Agency’s sole discretion or this Agreement at OMNIA Partners Public Sector’s sole discretion. All Administrative Fees not paid within thirty (30) days of the end of the previous calendar month shall bear interest atthe rate of one and one-half percent (1.5%) per month until paid infull.
ARTICLE VI
MISCELLANEOUS
6.1 Entire Agreement. This Agreement supersedes any and all other agreements, either oral or in writing, between the parties hereto with respect to the subject matter hereof, and no other agreement, statement, or promise relating to the subject matter of this Agreement which is not contained herein shall be valid or binding.
6.2 Assignment.
(a) Supplier. Neither this Agreement nor any rights or obligations hereunder shall be assignable by Supplier without prior written consent of OMNIA Partners Public Sector, and any assignment without such consent shall bevoid.
(b) OMNIA Partners Public Sector. This Agreement and any rights or obligations hereunder may be assigned by OMNIA Partners Public Sector in OMNIA Partners Public Sector’s sole discretion, to an existing or newly established legal entity that has the authority and capacity to perform OMNIA Partners Public Sector’s obligations hereunder.
6.3 Notices. All reports, notices or other communications given hereunder shall be delivered by first-class mail, postage prepaid, or overnight delivery requiring signature on receipt to the addresses as set forth below. OMNIA Partners Public Sector may, by written notice delivered to Supplier, designate any different address to which subsequent reports, notices or other communications shall be sent.
OMNIA Partners Public Sector: OMNIA Partners, Public Sector Attn: President
840 Crescent Centre Drive
Suite 600
Franklin, TN 37067
Supplier: .
Attn: OMNIA Partners Public Sector Program Manager
6.4 Severability. If any provision of this Agreement shall be deemed to be, or shall in fact be, illegal, inoperative or unenforceable, the same shall not affect any other provision or provisions herein contained or render the same invalid, inoperative or unenforceable to anyextent whatever.
6.5 Waiver. Any failure of a party to enforce, for any period of time, any of the provisions under this Agreement shall not be construed as a waiver of such provisions or of the right of said party thereafter to enforce each and every provision under this Agreement.
6.6 Counterparts. This Agreement may be executed in several counterparts, each of which shall be an original and all of which shall constitute but one and the same instrument.
6.7 Modifications. This Agreement may not be effectively amended, changed, modified, altered or terminated without the prior written consent of the partieshereto.
6.8 Mediation. In the event that there is a dispute over any of the provisions of this Agreement, an asserted breach of the Agreement, or a dispute over the applicability or legality of any of the provisions of this Agreement, the parties agree that they will mediate such dispute or assertedbreach as a condition precedent to any proceeding brought in any court or administrative forum. The moving party shall provide the other with ten (10) business days written notice and demand for mediation.
Mediation shall occur between executive officials of each party who shall have full authority to resolve the dispute or asserted breach. Mediation shall occur at a mutually convenient venue or telephonically at the option of OMNIA Partners Public Sector. The parties shall endeavor to conclude such mediation within forty-five (45) days of the written demand, but may mutually agree in writing to extend this timeframe. If the mediation is not concluded within forty-five (45) days of the written demand, the mediation requirement may be deemed satisfied at the sole discretion of OMNIA Partners Public Sector. In no event shall the mediation bar extend past six (6) months unless agreed to in writing by both parties. The parties shall cover their own costs ofmediation.
6.9 Applicable law, Jurisdiction, Venue and Fees. This Agreement shall be governed by the laws of the State of Tennessee and applicable federal law. If, following the mandatory mediation in paragraph 6.8, either party brings against the other any proceeding arising out of this Agreement, that party may bring that proceeding only in the United States District Court for the Middle District of Tennessee, only if there is not federal subject matter jurisdiction or diversity, in the Circuit or Chancery Court for Williamson County, Tennessee. Each party submits to the exclusive jurisdiction of thesecourts for purposes of any such proceeding and waives any contest to venue. The prevailing party in any such proceeding shall be entitled to recover reasonable attorneys’ fees andcosts.
7.0 Successors and Assigns. This Agreement shall inure to the benefit of and shall be binding upon OMNIA Partners Public Sector, Supplier and any successor and assign thereto; subject, however, to the limitations contained herein.
[Remainder of Page Intentionally Left Blank – Signatures Follow]
IN WITNESS WHEREOF, OMNIA Partners Public Sector has caused this Agreement to be executed in its name and Supplier has caused this Agreement to be executed in its name, all as of the date first written above.
OMNIA PARTNERS PUBLIC SECTOR
By
Name: Sarah E. Vavra
Title: Sr. Vice President, Public Sector Contracting
Date:
Supplier:
By
Name:
Title:
Date:
EXHIBIT A
MASTER INTERGOVERNMENTAL COOPERATIVE PURCHASING AGREEMENT,
EXAMPLE
MASTER INTERGOVERNMENTAL COOPERATIVE PURCHASING AGREEMENT This Master Intergovernmental Cooperative Purchasing Agreement (this “Agreement”) is entered into by and between those certain government agencies that execute a Principal Procurement Agency Certificate (“Principal Procurement Agencies”) with National Intergovernmental Purchasing Alliance Company, a Delaware corporation d/b/a OMNIA Partners, Public Sector and/or Communities Program Management, LLC, a California limited liability company d/b/a U.S.
Communities (collectively, “OMNIA Partners Public Sector”) to be appended and made a part hereof and such other public agencies (“Participating Public Agencies”) who register to participate in the cooperative purchasing programs administered by OMNIA Partners, Public Sector and its affiliates and subsidiaries (collectively, the “OMNIA Partners Parties”) by either registering on the OMNIA Partners, Public Sector website (www.omniapartners.com/publicsector or any successor website), or by executing a copy of this Agreement.
RECITALS
WHEREAS, after a competitive solicitation and selection process by Principal Procurement Agencies, in compliance with their own policies, procedures, rules and regulations, a number of suppliers have entered into “Master Agreements” (herein so called) to provide a variety of goods, products and services (“Products”) to the applicable Principal Procurement Agency and the Participating Public Agencies;
WHEREAS, Master Agreements are made available by Principal Procurement Agencies through the OMNIA Partners Parties and provide that Participating Public Agencies may purchase Products on the same terms, conditions and pricing as the Principal Procurement Agency, subject to any applicable federal and/or local purchasing ordinances and the laws of the State of purchase; and WHEREAS, in addition to Master Agreements, the OMNIA Partners Parties may from time to time offer Participating Public Agencies the opportunity to acquire Products through other group purchasing agreements.
NOW, THEREFORE, in consideration of the mutual promises contained in this Agreement, and of the mutual benefits to result, the parties hereby agree as follows:
1. Each party will facilitate the cooperative procurement of Products.
2. The Participating Public Agencies shall procure Products in accordance with and subject to the relevant federal, state and local statutes, ordinances, rules and regulations that govern Participating Public Agency’s procurement practices. The Participating Public Agencies hereby acknowledge and agree that it is the intent of the parties that all provisions of this Agreement and that Principal Procurement Agencies’ participation in the program described herein comply with all applicable laws, including but not limited to the requirements of 42 C.F.R. § 1001.952(h), as may be amended from time to time. The Participating Public Agencies further acknowledge and agree that they are solely responsible for their compliance with all applicable “safe harbor” regulations,
including but not limited to any and all obligations to fully and accurately report discounts and incentives.
3. The Participating Public Agency represents and warrants that the Participating Public Agency is not a hospital or other healthcare provider and is not purchasing Products on behalf of a hospital or healthcare provider.
4. The cooperative use of Master Agreements shall be in accordance with the terms and conditions of the Master Agreements, except as modification of those terms and conditions is otherwise required by applicable federal, state or local law, policies orprocedures.
5. The Principal Procurement Agencies will make available, upon reasonable request, Master Agreement information which may assist in improving the procurement of Products by the Participating Public Agencies.
6. The Participating Public Agency agrees the OMNIA Partners Parties may provide access to group purchasing organization (“GPO”) agreements directly or indirectly by enrolling the Participating Public Agency in another GPO’s purchasing program, including but not limited to Vizient Source, LLC, Provista, Inc. and other OMNIA Partners, Public Sector affiliates and subsidiaries; provided the purchase of Products through the OMNIA Partners Parties or any other GPO shall be at the Participating Public Agency’s sole discretion.
7. The Participating Public Agencies (each a “Procuring Party”) that procure Products through any Master Agreement or GPO Product supply agreement (each a “GPO Contract”) will make timely payments to the distributor, manufacturer or other vendor (collectively, “Supplier”) for Products received in accordance with the terms and conditions of the Master Agreement or GPO Contract, as applicable. Payment for Products and inspections and acceptance of Products ordered by the Procuring Party shall be the exclusive obligation of such Procuring Party. Disputes between Procuring Party and any Supplier shall be resolved in accordance with the law and venue rules of the State of purchase unless otherwise agreed to by the Procuring Party and Supplier.
8. The Procuring Party shall not use this Agreement as a method for obtaining additional concessions or reduced prices for purchase of similar products or services outside of the Master Agreement. Master Agreements may be structured with not-to-exceed pricing, in which cases the Supplier may offer the Procuring Party and the Procuring Party may accept lower pricing or additional concessions for purchase of Products through a Master Agreement.
9. The Procuring Party shall be responsible for the ordering of Products under this Agreement. A non-procuring party shall not be liable in any fashion for any violation by a Procuring Party, and, to the extent permitted by applicable law, the Procuring Party shall hold non-procuring party harmless from any liability that may arise from the acts or omissions of the ProcuringParty.
10. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE OMNIA
PARTNERS PARTIES EXPRESSLY DISCLAIM ALL EXPRESS OR IMPLIED
REPRESENTATIONS AND WARRANTIES REGARDING ANY PRODUCT, MASTER AGREEMENT AND GPO CONTRACT. THE OMNIA PARTNERS PARTIES SHALL NOT BE
LIABLE IN ANY WAY FOR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL,
EXEMPLARY, PUNITIVE, OR RELIANCE DAMAGES, EVEN IF THE OMNIA PARTNERS PARTIES ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHER, THE
PROCURING PARTY ACKNOWLEDGES AND AGREES THAT THE OMNIA PARTNERS
PARTIES SHALL HAVE NO LIABILITY FOR ANY ACT OR OMISSION BY A SUPPLIER OR OTHER PARTY UNDER A MASTER AGREEMENT OR GPO CONTRACT.
11. This Agreement shall remain in effect until termination by either party giving thirty (30) days’ written notice to the other party. The provisions of Paragraphs 6 - 10 hereof shall survive any such termination.
12. This Agreement shall take effect upon (i) execution of the Principal Procurement Agency Certificate, or (ii) registration on the OMNIA Partners, Public Sector website or the execution of this Agreement by a Participating Public Agency, asapplicable.
OMNIA PARTNERS, PUBLIC SECTOR
Authorized Signature Signature
Sarah E. Vavra
Name
Title and Agency Name
Name
Sr. Vice President, Public Sector Contracting
Title
Date Date
EXHIBIT B
OMNIA PARTNERS CONTRACT SALES REPORTING TEMPLATE
OMNIA PARTNERS EXHIBITS
EXHIBIT C - CONTRACT SALES REPORTING TEMPLATE
(to be submitted electronically in Microsoft Excel format) OMNIA Partners Contract Sales Monthly Report
Supplier Name:
Contract Sales Report Month:
Contract ID:
Supplier Reporting Contact:
Title:
Phone:
Email:
Participating Agency Name Address City State Zip Code
Participating
Agency #
{Assigned by
National IPA
and provided
to Supplier}
Transaction
Date
(Date of
Sale)
Contract
Sales for
Month ($)
Admin
Fee %
Admin
Fee $
Report Totals
Cumulative Contract Sales
OMNIA PARTNERS
EXHIBIT C
PRINCIPAL PROCUREMENT AGENCY CERTIFICATE, EXAMPLE
PRINCIPAL PROCUREMENT AGENCY CERTIFICATE
In its capacity as a Principal Procurement Agency (as defined below) for National Intergovernmental Purchasing Alliance Company, a Delaware corporation d/b/a OMNIA Partners, Public Sector (“OMNIA Partners, Public Sector”), [NAME OF PPA] agrees to pursue Master Agreements for Products as specified in the attached Exhibits to this Principal Procurement Agency Certificate.
I hereby acknowledge, in my capacity as _____________ of and on behalf of [NAME OF PPA] (“Principal Procurement Agency”), that I have read and hereby agree to the general terms and conditions set forth in the attached Master Intergovernmental Cooperative Purchasing Agreement regulating the use of the Master Agreements and purchase of Products that from time to time are made available by Principal Procurement Agencies to Participating Public Agencies nationwide through OMNIA Partners, Public Sector.
I understand that the purchase of one or more Products under the provisions of the Master Intergovernmental Cooperative Purchasing Agreement is at the sole and complete discretion of the Participating Public Agency.
Authorized Signature, [PRINCIPAL PROCUREMENT AGENCY]
Signature
Name
Title
Date
Ag
nder the provisions o
at the sole and complete discr
PROCUREMENT AGENCY]
provisi
le and complete d
R ENT AGEN
OMNIA PARTNERS
EXHIBIT D
FEDERAL FUNDS CERTIFICATIONS
FEDERAL CERTIFICATIONS
ADDENDUM FOR AGREEMENT FUNDED BY U.S. FEDERAL GRANT
TO WHOM IT MAY CONCERN:
Participating Agencies may elect to use federal funds to purchase under the Master Agreement. This form should be completed and returned.
DEFINITIONS
Contract means a legal instrument by which a non–Federal entity purchases property or services needed to carry out the project or program under a Federal award. The term as used in this part does not include a legal instrument, even if the non–Federal entity considers it a contract, when the substance of the transaction meets the definition of a Federal award or subaward Contractor means an entity that receives a contract as defined in Contract.
Cooperative agreement means a legal instrument of financial assistance between a Federal awarding agency or pass-through entity and a non–Federal entity that, consistent with 31 U.S.C. 6302–6305:
(a) Is used to enter into a relationship the principal purpose of which is to transfer anything of value from the Federal awarding agency or pass-through entity to the non–Federal entity to carry out a public purpose authorized by a law of the United States (see 31 U.S.C. 6101(3)); and not to acquire property or services for the Federal government or pass-through entity's direct benefit or use;
(b) Is distinguished from a grant in that it provides for substantial involvement between the Federal awarding agency or pass-through entity and the non–Federal entity in carrying out the activity contemplated by the Federal award. (c) The term does not include:
(1) A cooperative research and development agreement as defined in 15 U.S.C. 3710a; or (2) An agreement that provides only:
(i) Direct United States Government cash assistance to an individual; (ii) A subsidy;
(iii) A loan;
(iv) A loan guarantee; or
(v) Insurance.
Federal awarding agency means the Federal agency that provides a Federal award directly to a non–Federal entity Federal award has the meaning, depending on the context, in either paragraph (a) or (b) of this section:
(a)(1) The Federal financial assistance that a non–Federal entity receives directly from a Federal awarding agency or indirectly from a pass-through entity, as described in § 200.101 Applicability; or (2) The cost-reimbursement contract under the Federal Acquisition Regulations that a non–Federal entity receives directly from a Federal awarding agency or indirectly from a pass-through entity, as described in § 200.101 Applicability.
(b) The instrument setting forth the terms and conditions. The instrument is the grant agreement, cooperative agreement, other agreement for assistance covered in paragraph (b) of § 200.40 Federal financial assistance, or the costreimbursement contract awarded under the Federal Acquisition Regulations. (c) Federal award does not include other contracts that a Federal agency uses to buy goods or services from a contractor or a contract to operate Federal government owned, contractor operated facilities (GOCOs). (d) See also definitions of Federal financial assistance, grant agreement, and cooperative agreement.
Non–Federal entity means a state, local government, Indian tribe, institution of higher education (IHE), or nonprofit organization that carries out a Federal award as a recipient or subrecipient.
Nonprofit organization means any corporation, trust, association, cooperative, or other organization, not including IHEs, that:
(a) Is operated primarily for scientific, educational, service, charitable, or similar purposes in the public interest;
(b) Is not organized primarily for profit; and
(c) Uses net proceeds to maintain, improve, or expand the operations of the organization.
Obligations means, when used in connection with a non–Federal entity's utilization of funds under a Federal award, orders placed for property and services, contracts and subawards made, and similar transactions during a given period that require payment by the non–Federal entity during the same or a future period.
Pass-through entity means a non–Federal entity that provides a subaward to a subrecipient to carry out part of a Federal program.
Recipient means a non–Federal entity that receives a Federal award directly from a Federal awarding agency to carry out an activity under a Federal program. The term recipient does not include subrecipients.
Simplified acquisition threshold means the dollar amount below which a non–Federal entity may purchase property or services using small purchase methods. Non–Federal entities adopt small purchase procedures in order to expedite the purchase of items costing less than the simplified acquisition threshold. The simplified acquisition threshold is set by the Federal Acquisition Regulation at 48 CFR Subpart 2.1 (Definitions) and in accordance with 41 U.S.C. 1908. As of the publication of this part, the simplified acquisition threshold is $150,000, but this threshold is periodically adjusted for inflation. (Also see definition of § 200.67 Micropurchase.) Subaward means an award provided by a pass-through entity to a subrecipient for the subrecipient to carry out part of a Federal award received by the pass-through entity. It does not include payments to a contractor or payments to an individual that is a beneficiary of a Federal program. A subaward may be provided through any form of legal agreement, including an agreement that the pass-through entity considers a contract.
Subrecipient means a non–Federal entity that receives a subaward from a pass-through entity to carry out part of a Federal program; but does not include an individual that is a beneficiary of such program. A subrecipient may also be a recipient of other Federal awards directly from a Federal awarding agency.
Termination means the ending of a Federal award, in whole or in part at any time prior to the planned end of period of performance.
The following certifications and provisions may be required and apply when Participating Agency expends federal funds for any purchase resulting from this procurement process. Pursuant to 2 C.F.R. § 200.326, all contracts, including small purchases, awarded by the Participating Agency and the Participating Agency’s subcontractors shall contain the procurement provisions of Appendix II to Part 200, as applicable.
APPENDIX II TO 2 CFR PART 200
(A) Contracts for more than the simplified acquisition threshold currently set at $150,000, which is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must address administrative, contractual, or legal remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and penalties as appropriate.
Pursuant to Federal Rule (A) above, when a Participating Agency expends federal funds, the Participating Agency reserves all rights and privileges under the applicable laws and regulations with respect to this procurement in the event of breach of contract by either party.
Does offeror agree? YES Initials of Authorized Representative of offeror (B) Termination for cause and for convenience by the grantee or subgrantee including the manner by which it will be effected and the basis for settlement. (All contracts in excess of $10,000) Pursuant to Federal Rule (B) above, when a Participating Agency expends federal funds, the Participating Agency reserves the right to immediately terminate any agreement in excess of $10,000 resulting from this procurement process in the event of a breach or default of the agreement by Offeror as detailed in the terms of the contract.
Does offeror agree? YES Initials of Authorized Representative of offeror (C) Equal Employment Opportunity. Except as otherwise provided under 41 CFR Part 60, all contracts that meet the definition of “federally assisted construction contract” in 41 CFR Part 60-1.3 must include the equal opportunity clause provided under 41 CFR 60-1.4(b), in accordance with Executive Order 11246, “Equal Employment Opportunity” (30 CFR 12319, 12935, 3 CFR Part, 1964-1965 Comp., p. 339), as amended by Executive Order 11375, “Amending Executive Order 11246 Relating to Equal Employment Opportunity,” and implementing regulations at 41 CFR part 60, “Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor.” Pursuant to Federal Rule (C) above, when a Participating Agency expends federal funds on any federally assisted construction
contract, the equal opportunity clause is incorporated by reference herein.
Does offeror agree to abide by the above? YES Initials of Authorized Representative of offeror (D) Davis-Bacon Act, as amended (40 U.S.C. 3141-3148). When required by Federal program legislation, all prime construction contracts in excess of $2,000 awarded by non-Federal entities must include a provision for compliance with the Davis-Bacon Act (40 U.S.C. 3141-3144, and 3146-3148) as supplemented by Department of Labor regulations (29 CFR Part 5, “Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction”). In accordance with the statute, contractors must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less than once a week. The non-Federal entity must place a copy of the current prevailing wage determination issued by the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned upon the acceptance of the wage determination. The non - Federal entity must report all suspected or reported violations to the Federal awarding agency. The contracts must also include a provision for compliance with the Copeland “Anti-Kickback” Act (40 U.S.C. 3145), as supplemented by Department of Labor regulations (29 CFR Part 3, “Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States”). The Act provides that each contractor or subrecipient must be prohibited from inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. The non -Federal entity must report all suspected or reported violations to the Federal awarding agency.
Pursuant to Federal Rule (D) above, when a Participating Agency expends federal funds during the term of an award for all contracts and subgrants for construction or repair, offeror will be in compliance with all applicable Davis-Bacon Act provisions.
Does offeror agree? YES Initials of Authorized Representative of offeror (E) Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708). Where applicable, all contracts awarded by the non-Federal entity in excess of $100,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Pursuant to Federal Rule (E) above, when a Participating Agency expends federal funds, offeror certifies that offeror will be in compliance with all applicable provisions of the Contract Work Hours and Safety Standards Act during the term of an award for all contracts by Participating Agency resulting from this procurement process.
Does offeror agree? YES Initials of Authorized Representative of offeror (F) Rights to Inventions Made Under a Contract or Agreement. If the Federal award meets the definition of “funding agreement” under 37 CFR §401.2 (a) and the recipient or subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the substitution of parties, assignment or performance of experimental, developmental, or research work under that “funding agreement,” the recipient or subrecipient must comply with the requirements of 37 CFR Part 401, “Rights to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements,” and any implementing regulations issued by the awarding agency.
Pursuant to Federal Rule (F) above, when federal funds are expended by Participating Agency, the offeror certifies that during the term of an award for all contracts by Participating Agency resulting from this procurement process, the offeror agrees to comply with all applicable requirements as referenced in Federal Rule (F) above.
Does offeror agree? YES Initials of Authorized Representative of offeror (G) Clean Air Act (42 U.S.C. 7401-7671q.) and the Federal Water Pollution Control Act (33 U.S.C. 1251-1387), as amended— Contracts and subgrants of amounts in excess of $150,000 must contain a provision that requires the non - Federal award to agree to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act (42 U.S.C. 7401- 7671q) and the Federal Water Pollution Control Act as amended (33 U.S.C. 1251- 1387). Violations must be reported to the Federal awarding agency and the Regional Office of the Environmental Protection Agency (EPA) Pursuant to Federal Rule (G) above, when federal funds are expended by Participating Agency, the offeror certifies that during the term of an award for all contracts by Participating Agency member resulting from this procurement process, the offeror agrees to comply with all applicable requirements as referenced in Federal Rule (G) above.
Does offeror agree? YES Initials of Authorized Representative of offeror (H) Debarment and Suspension (Executive Orders 12549 and 12689)—A contract award (see 2 CFR 180.220) must not be made to parties listed on the government wide exclusions in the System for Award Management (SAM), in accordance with the Executive Office of the President Office of Management and Budget (OMB) guidelines at 2 CFR 180 that implement Executive Orders 12549 (3 CFR part 1986 Comp., p. 189) and 12689 (3 CFR part 1989 Comp., p. 235), “Debarment and Suspension.” SAM Exclusions contains the names of parties debarred, suspended, or otherwise excluded by agencies, as well as parties declared ineligible under statutory or regulatory authority other than Executive Order 12549.
Pursuant to Federal Rule (H) above, when federal funds are expended by Participating Agency, the offeror certifies that during the term of an award for all contracts by Participating Agency resulting from this procurement process, the offeror certifies that neither it nor its principals is presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation by any federal department or agency. If at any time during the term of an award the offeror or its principals becomes debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation by any federal department or agency, the offeror will notify the Participating Agency.
Does offeror agree? YES Initials of Authorized Representative of offeror (I) Byrd Anti-Lobbying Amendment (31 U.S.C. 1352)—Contractors that apply or bid for an award exceeding $100,000 must file the required certification. Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352. Each tier must also disclose any lobbying with non-Federal funds that takes place in connection with obtaining any Federal award. Such disclosures are forwarded from tier to tier up to the non-Federal award.
Pursuant to Federal Rule (I) above, when federal funds are expended by Participating Agency, the offeror certifies that during the term and after the awarded term of an award for all contracts by Participating Agency resulting from this procurement process, the offeror certifies that it is in compliance with all applicable provisions of the Byrd Anti-Lobbying Amendment (31 U.S.C. 1352). The undersigned further certifies that:
(1) No Federal appropriated funds have been paid or will be paid for on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with the awarding of a Federal contract, the making of a Federal grant, the making of a Federal loan, the entering into a cooperative agreement, and the extension, continuation, renewal, amendment, or modification of a Federal contract, grant, loan, or cooperative agreement. (2) If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with this Federal grant or cooperative agreement, the undersigned shall complete and submit Standard Form-LLL, “Disclosure Form to Report Lobbying”, in accordance with its instructions. (3) The undersigned shall require that the language of this certification be included in the award documents for all covered subawards exceeding $100,000 in Federal funds at all appropriate tiers and that all subrecipients shall certify and disclose accordingly.
Does offeror agree? YES Initials of Authorized Representative of offeror
RECORD RETENTION REQUIREMENTS FOR CONTRACTS INVOLVING FEDERAL FUNDS When federal funds are expended by Participating Agency for any contract resulting from this procurement process, offeror certifies that it will comply with the record retention requirements detailed in 2 CFR § 200.333. The offeror further certifies that offeror will retain all records as required by 2 CFR § 200.333 for a period of three years after grantees or subgrantees submit final expenditure reports or quarterly or annual financial reports, as applicable, and all other pending matters are closed.
Does offeror agree? YES Initials of Authorized Representative of offeror
CERTIFICATION OF COMPLIANCE WITH THE ENERGY POLICY AND CONSERVATION ACT When Participating Agency expends federal funds for any contract resulting from this procurement process, offeror certifies that it will comply with the mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act (42 U.S.C. 6321 et seq.; 49 C.F.R. Part 18).
Does offeror agree? YES Initials of Authorized Representative of offeror
CERTIFICATION OF COMPLIANCE WITH BUY AMERICA PROVISIONS To the extent purchases are made with Federal Highway Administration, Federal Railroad Administration, or Federal Transit Administration funds, offeror certifies that its products comply with all applicable provisions of the Buy America Act and agrees to
provide such certification or applicable waiver with respect to specific products to any Participating Agency upon request.
Purchases made in accordance with the Buy America Act must still follow the applicable procurement rules calling for free and open competition.
Does offeror agree? YES Initials of Authorized Representative of offeror CERTIFICATION OF ACCESS TO RECORDS – 2 C.F.R. § 200.336 Offeror agrees that the Inspector General of the Agency or any of their duly authorized representatives shall have access to any documents, papers, or other records of offeror that are pertinent to offeror’s discharge of its obligations under the Contract for the purpose of making audits, examinations, excerpts, and transcriptions. The right also includes timely and reasonable access to offeror’s personnel for the purpose of interview and discussion relating to such documents.
Does offeror agree? YES Initials of Authorized Representative of offeror
CERTIFICATION OF APPLICABILITY TO SUBCONTRACTORS
Offeror agrees that all contracts it awards pursuant to the Contract shall be bound by the foregoing terms and conditions.
Does offeror agree? YES Initials of Authorized Representative of offeror Offeror agrees to comply with all federal, state, and local laws, rules, regulations and ordinances, as applicable. It is further acknowledged that offeror certifies compliance with all provisions, laws, acts, regulations, etc. as specifically noted above.
Offeror’s Name: ____________________________________________________________________________________________ Address, City, State, and Zip Code: _____________________________________________________________________________ Phone Number:___________________________________ Fax Number: ______________________________________ Printed Name and Title of Authorized Representative:______________________________________________________________________ Email Address: ____________________________________________________________________________________________ Signature of Authorized Representative: ____________________________________Date: _____________________________
OMNIA PARTNERS
EXHIBIT E
NEW JERSEY BUSINESS COMPLIANCE
NEW JERSEY BUSINESS COMPLIANCE
Suppliers intending to do business in the State of New Jersey must comply with policies and procedures required under New Jersey statues. All offerors submitting bids/proposals must complete the following forms specific to the State of New Jersey. Completed forms should be submitted with the offeror’s response to the IFB. Failure to complete the New Jersey packet will impact OMNIA Partners’ ability to promote the Master Agreement in the State of New Jersey.
DOC #1 Ownership Disclosure Form
DOC #2 Non-Collusion Affidavit
DOC #3 Affirmative Action Affidavit
DOC #4 Political Contribution Disclosure Form
DOC #5 Stockholder Disclosure Certification
DOC #6 Certification of Non-Involvement in Prohibited Activities in Iran DOC #7 New Jersey Business Registration Certificate
New Jersey suppliers are required to comply with the following New Jersey statutes when applicable:
x all anti-discrimination laws, including those contained in N.J.S.A. 10:2-1 through N.J.S.A. 10:2-14, N.J.S.A. 10:5-1, and N.J.S.A. 10:5-31 through 10:5-38; x Prevailing Wage Act, N.J.S.A. 34:11-56.26, for all contracts within the contemplation of the Act;
x Public Works Contractor Registration Act, N.J.S.A. 34:11-56.26; and x Bid and Performance Security, as required by the applicable municipal or state statutes.
DOC #1
OWNERSHIP DISCLOSURE FORM
(N.J.S. 52:25-24.2)
Pursuant to the requirements of P.L. 1999, Chapter 440 effective April 17, 2000 (Local Public Contracts Law), the offeror shall complete the form attached to these specifications listing the persons owning 10 percent (10%) or more of the firm presenting the bid/proposal.
Company Name:
Street:
City, State, Zip Code:
Complete as appropriate:
I _______________________________________, certify that I am the sole owner of ____________________________________, that there are no partners and the business is not incorporated, and the provisions of N.J.S. 52:25-24.2 do not apply.
OR:
I _______________________________________, a partner in___________________________, do hereby certify that the following is a list of all individual partners who own a 10% or greater interest therein. I further certify that if one (1) or more of the partners is itself a corporation or partnership, there is also set forth the names and addresses of the stockholders holding 10% or more of that corporation’s stock or the individual partners owning 10% or greater interest in that partnership.
OR:
I _______________________________________, an authorized representative of ______________________, a corporation, do hereby certify that the following is a list of the names and addresses of all stockholders in the corporation who own 10% or more of its stock of any class. I further certify that if one (1) or more of such stockholders is itself a corporation or partnership, that there is also set forth the names and addresses of the stockholders holding 10% or more of the corporation’s stock or the individual partners owning a 10% or greater interest in that partnership. (Note: If there are no partners or stockholders owning 10% or more interest, indicate none.) Name Address Interest
I further certify that the statements and information contained herein, are complete and correct to the best of my knowledge and belief.
Date Authorized Signature and Title
DOC #2
NON-COLLUSION AFFIDAVIT
Company Name: ________________________________________
Street: ________________________________________________ City, State, Zip Code:____________________________________ State of ________________________________________________ County of ______________________________________________ I, of the_______________________________________________ Name City
in the County of ____________________________, State of _______________________________ of full age, being duly sworn according to law on my oath depose and say that:
I am the _________________________of the firm of _____________________________________ Title Company Name
the Offeror making the Bid/Proposal for the goods, services or public work specified under the attached bid/proposal, and that I executed the said bid/proposal with full authority to do so; that said Offeror has not directly or indirectly entered into any agreement, participated in any collusion, or otherwise taken any action in restraint of free, competitive bidding in connection with the above bid/proposal, and that all statements contained in said bid/proposal and in this affidavit are true and correct, and made with full knowledge that relies upon the truth of the statements contained in said bid/proposal and in the statements contained in this affidavit in awarding the contract for the said goods, services or public work.
I further warrant that no person or selling agency has been employed or retained to solicit or secure such contract upon an agreement or understanding for a commission, percentage, brokerage or contingent fee, except bona fide employees or bona fide established commercial or selling agencies maintained by
Company Name Authorized Signature & Title
Subscribed and sworn before me
this ______ day of ______________, 20____
__________________________________________
Notary Public of ______________________
My commission expires _________________ , 20____
SEAL
DOC #3
AFFIRMATIVE ACTION AFFIDAVIT
(P.L. 1975, C.127)
Company Name:
Street:
City, State, Zip Code:
Bid/Proposal Certification:
Indicate below company’s compliance with New Jersey Affirmative Action regulations. Company’s bid/proposal will be accepted even if company is not in compliance at this time. No contract and/or purchase order may be issued, however, until all Affirmative Action requirements are met.
Required Affirmative Action Evidence:
Procurement, Professional & Service Contracts (Exhibit A) Vendors must submit with bid/proposal:
1. A photo copy of their Federal Letter of Affirmative Action Plan Approval OR
2. A photo copy of their Certificate of Employee Information Report OR
3. A complete Affirmative Action Employee Information Report (AA302) ________ Public Work – Over $50,000 Total Project Cost:
A. No approved Federal or New Jersey Affirmative Action Plan. We will complete Report Form AA201-A upon receipt from the
B. Approved Federal or New Jersey Plan – certificate enclosed I further certify that the statements and information contained herein, are complete and correct to the best of my knowledge and belief.
_______________________ _________________________________ Date Authorized Signature and Title
DOC #3, continued
P.L. 1995, c. 127 (N.J.A.C. 17:27)
MANDATORY AFFIRMATIVE ACTION LANGUAGE
PROCUREMENT, PROFESSIONAL AND SERVICE
CONTRACTS
During the performance of this contract, the contractor agrees as follows:
The contractor or subcontractor, where applicable, will not discriminate against any employee or applicant for employment because of age, race, creed, color, national origin, ancestry, marital status, sex, affectional or sexual orientation. The contractor will take affirmative action to ensure that such applicants are recruited and employed, and that employees are treated during employment, without regard to their age, race, creed, color, national origin, ancestry, marital status, sex, affectional or sexual orientation. Such action shall include, but not be limited to the following:
employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. The contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices to be provided by the Public Agency Compliance Officer setting forth provisions of this non-discrimination clause.
The contractor or subcontractor, where applicable will, in all solicitations or advertisement for employees placed by or on behalf of the contractor, state that all qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, sex, affectional or sexual orientation.
The contractor or subcontractor, where applicable, will send to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding, a notice, to be provided by the agency contracting officer advising the labor union or workers' representative of the contractor's commitments under this act and shall post copies of the notice in conspicuous places available to employees and applicants for employment.
The contractor or subcontractor, where applicable, agrees to comply with any regulations promulgated by the Treasurer pursuant to P.L. 1975, c. 127, as amended and supplemented from time to time and the Americans with Disabilities Act.
The contractor or subcontractor agrees to attempt in good faith to employ minority and female workers trade consistent with the applicable county employment goal prescribed by N.J.A.C. 17:27-5.2 promulgated by the Treasurer pursuant to P.L. 1975, C.127, as amended and supplemented from time to time or in accordance with a binding determination of the applicable county employment goals determined by the Affirmative Action Office pursuant to N.J.A.C. 17:27-5.2 promulgated by the Treasurer pursuant to P.L. 1975, C.127, as amended and supplemented from time to time.
The contractor or subcontractor agrees to inform in writing appropriate recruitment agencies in the area, including employment agencies, placement bureaus, colleges, universities, labor unions, that it does not discriminate on the basis of age, creed, color, national origin, ancestry, marital status, sex, affectional or sexual orientation, and that it will discontinue the use of any recruitment agency which engages in direct or indirect discriminatory practices.
The contractor or subcontractor agrees to revise any of it testing procedures, if necessary, to assure that all personnel testing conforms with the principles of job-related testing, as established by the statutes and court decisions of the state of New Jersey and as established by applicable Federal law and applicable Federal court decisions.
The contractor or subcontractor agrees to review all procedures relating to transfer, upgrading, downgrading and lay-off to ensure that all such actions are taken without regard to age, creed, color, national origin, ancestry, marital status, sex, affectional or sexual orientation, and conform with the applicable employment goals, consistent with the statutes and court decisions of the State of New Jersey, and applicable Federal law and applicable Federal court decisions.
The contractor and its subcontractors shall furnish such reports or other documents to the Affirmative Action Office as may be requested by the office from time to time in order to carry out the purposes of these regulations, and public agencies shall furnish such information as may be requested by the Affirmative Action Office for conducting a compliance investigation pursuant to Subchapter 10 of the Administrative Code (NJAC 17:27). ________________________________________________
Signature of Procurement Agent
DOC #4
C. 271 POLITICAL CONTRIBUTION DISCLOSURE FORM
Public Agency Instructions
This page provides guidance to public agencies entering into contracts with business entities that are required to file Political Contribution Disclosure forms with the agency. It is not intended to be provided to contractors. What follows are instructions on the use of form local units can provide to contractors that are required to disclose political contributions pursuant to N.J.S.A. 19:44A-20.26 (P.L. 2005, c. 271, s.2). Additional information on the process is available in Local Finance Notice 2006-1 (http://www.nj.gov/dca/divisions/dlgs/resources/lfns_2006.html). Please refer back to these instructions for the appropriate links, as the Local Finance Notices include links that are no longer operational.
1. The disclosure is required for all contracts in excess of $17,500 that are not awarded pursuant to a “fair and open” process (N.J.S.A. 19:44A-20.7).
2. Due to the potential length of some contractor submissions, the public agency should consider allowing data to be submitted in electronic form (i.e., spreadsheet, pdf file, etc.). Submissions must be kept with the contract documents or in an appropriate computer file and be available for public access. The form is worded to accept this alternate submission. The text should be amended if electronic submission will not be allowed.
3. The submission must be received from the contractor and on file at least 10 days prior to award of the contract.
Resolutions of award should reflect that the disclosure has been received and is on file.
4. The contractor must disclose contributions made to candidate and party committees covering a wide range of public agencies, including all public agencies that have elected officials in the county of the public agency, state legislative positions, and various state entities. The Division of Local Government Services recommends that contractors be provided a list of the affected agencies. This will assist contractors in determining the campaign and political committees of the officials and candidates affected by the disclosure. a. The Division has prepared model disclosure forms for each county. They can be downloaded from the “County PCD Forms” link on the Pay-to-Play web site at http://www.nj.gov/dca/divisions/dlgs/programs/lpcl.html#12.
They will be updated from time-to-time as necessary.
b. A public agency using these forms should edit them to properly reflect the correct legislative district(s). As the forms are county-based, they list all legislative districts in each county. Districts that do not represent the public agency should be removed from the lists.
c. Some contractors may find it easier to provide a single list that covers all contributions, regardless of the county.
These submissions are appropriate and should be accepted. d. The form may be used “as-is”, subject to edits as described herein. e. The “Contractor Instructions” sheet is intended to be provided with the form. It is recommended that the Instructions and the form be printed on the same piece of paper. The form notes that the Instructions are printed on the back of the form; where that is not the case, the text should be edited accordingly. f. The form is a Word document and can be edited to meet local needs, and posted for download on web sites, used as an e-mail attachment, or provided as a printed document.
5. It is recommended that the contractor also complete a “Stockholder Disclosure Certification.” This will assist the local unit in its obligation to ensure that contractor did not make any prohibited contributions to the committees listed on the Business Entity Disclosure Certification in the 12 months prior to the contract (See Local Finance Notice 2006-7 for additional information on this obligation at http://www.nj.gov/dca/divisions/dlgs/resources/lfns_2006.html). A sample Certification form is part of this package and the instruction to complete it is included in the Contractor Instructions. NOTE: This section is not applicable to Boards of Education.
DOC #4, continued
C. 271 POLITICAL CONTRIBUTION DISCLOSURE FORM
Contractor Instructions
Business entities (contractors) receiving contracts from a public agency that are NOT awarded pursuant to a “fair and open” process (defined at N.J.S.A. 19:44A-20.7) are subject to the provisions of P.L. 2005, c. 271, s.2 (N.J.S.A. 19:44A20.26). This law provides that 10 days prior to the award of such a contract, the contractor shall disclose contributions to:
x any State, county, or municipal committee of a political party x any legislative leadership committee*
x any continuing political committee (a.k.a., political action committee) x any candidate committee of a candidate for, or holder of, an elective office:
o of the public entity awarding the contract
o of that county in which that public entity is located o of another public entity within that county
o or of a legislative district in which that public entity is located or, when the public entity is a county, of any legislative district which includes all or part of the county The disclosure must list reportable contributions to any of the committees that exceed $300 per election cycle that were made during the 12 months prior to award of the contract. See N.J.S.A. 19:44A-8 and 19:44A-16 for more details on reportable contributions.
N.J.S.A. 19:44A-20.26 itemizes the parties from whom contributions must be disclosed when a business entity is not a natural person. This includes the following:
x individuals with an “interest” ownership or control of more than 10% of the profits or assets of a business entity or 10% of the stock in the case of a business entity that is a corporation for profit x all principals, partners, officers, or directors of the business entity or their spouses x any subsidiaries directly or indirectly controlled by the business entity x IRS Code Section 527 New Jersey based organizations, directly or indirectly controlled by the business entity and filing as continuing political committees, (PACs).
When the business entity is a natural person, “a contribution by that person’s spouse or child, residing therewith, shall be deemed to be a contribution by the business entity.” [N.J.S.A. 19:44A-20.26(b)] The contributor must be listed on the disclosure.
Any business entity that fails to comply with the disclosure provisions shall be subject to a fine imposed by ELEC in an amount to be determined by the Commission which may be based upon the amount that the business entity failed to report.
The enclosed list of agencies is provided to assist the contractor in identifying those public agencies whose elected official and/or candidate campaign committees are affected by the disclosure requirement. It is the contractor’s responsibility to identify the specific committees to which contributions may have been made and need to be disclosed. The disclosed information may exceed the minimum requirement.
The enclosed form, a content-consistent facsimile, or an electronic data file containing the required details (along with a signed cover sheet) may be used as the contractor’s submission and is disclosable to the public under the Open Public Records Act.
The contractor must also complete the attached Stockholder Disclosure Certification. This will assist the agency in meeting its obligations under the law. NOTE: This section does not apply to Board of Education contracts. * N.J.S.A. 19:44A-3(s): “The term "legislative leadership committee" means a committee established, authorized to be established, or designated by the President of the Senate, the Minority Leader of the Senate, the Speaker of the General Assembly or the Minority Leader of the General Assembly pursuant to section 16 of P.L.1993, c.65 (C.19:44A-10.1) for the purpose of receiving contributions and making expenditures.”
DOC #4, continued
C. 271 POLITICAL CONTRIBUTION DISCLOSURE FORM
Required Pursuant to N.J.S.A. 19:44A-20.26
This form or its permitted facsimile must be submitted to the local unit no later than 10 days prior to the award of the contract.
Part I – Vendor Information
Vendor Name:
Address:
City: State: Zip:
The undersigned being authorized to certify, hereby certifies that the submission provided herein represents compliance with the provisions of N.J.S.A. 19:44A-20.26 and as represented by the Instructions accompanying this form.
_______________________ _______________________ ________________________ Signature Printed Name Title
Part II – Contribution Disclosure
Disclosure requirement: Pursuant to N.J.S.A. 19:44A-20.26 this disclosure must include all reportable political contributions (more than $300 per election cycle) over the 12 months prior to submission to the committees of the government entities listed on the form provided by the local unit.
F Check here if disclosure is provided in electronic form Contributor Name Recipient Name Date Dollar Amount
$
F Check here if the information is continued on subsequent page(s)
DOC #4, continued
List of Agencies with Elected Officials Required for Political Contribution Disclosure N.J.S.A. 19:44A-20.26
County Name:
State: Governor, and Legislative Leadership Committees
Legislative District #s:
State Senator and two members of the General Assembly per district.
County:
Freeholders County Clerk Sheriff
{County Executive} Surrogate
Municipalities (Mayor and members of governing body, regardless of title):
USERS SHOULD CREATE THEIR OWN FORM, OR DOWNLOAD
FROM THE PAY TO PLAY SECTION OF THE DLGS WEBSITE A
COUNTY-BASED, CUSTOMIZABLE FORM.
DOC #5
STOCKHOLDER DISCLOSURE CERTIFICATION
Name of Business:
I certify that the list below contains the names and home addresses of all stockholders holding 10% or more of the issued and outstanding stock of the undersigned.
OR
I certify that no one stockholder owns 10% or more of the issued and outstanding stock of the undersigned.
Check the box that represents the type of business organization:
Partnership Corporation Sole Proprietorship
Limited Partnership Limited Liability Corporation Limited Liability Partnership Subchapter S Corporation
Sign and notarize the form below, and, if necessary, complete the stockholder list below.
Stockholders:
Name: Name:
Home Address: Home Address:
Name: Name:
Home Address: Home Address:
Name: Name:
Home Address: Home Address:
Subscribed and sworn before me this ___ day of ___________, 2__.
(Notary Public)
My Commission expires:
_________________________________
(Affiant)
________________________________
(Print name & title of affiant)
(Corporate Seal)
DOC #6
Certification of Non-Involvement in Prohibited Activities in Iran Pursuant to N.J.S.A. 52:32-58, Offerors must certify that neither the Offeror, nor any of its parents, subsidiaries, and/or affiliates (as defined in N.J.S.A. 52:32 – 56(e) (3)), is listed on the Department of the Treasury’s List of Persons or Entities Engaging in Prohibited Investment Activities in Iran and that neither is involved in any of the investment activities set forth in N.J.S.A. 52:32 – 56(f).
Offerors wishing to do business in New Jersey through this contract must fill out the Certification of Non-Involvement in Prohibited Activities in Iran here:
http://www.state.nj.us/humanservices/dfd/info/standard/fdc/disclosure_investmentact.pdf.
Offerors should submit the above form completed with their bid/proposal.
DOC #7
NEW JERSEY BUSINESS REGISTRATION CERTIFICATE
(N.J.S.A. 52:32-44)
Offerors wishing to do business in New Jersey must submit their State Division of Revenue issued Business Registration Certificate with their bid/proposal here. Failure to do so will disqualify the Offeror from offering products or services in New Jersey through any resulting contract. http://www.state.nj.us/treasury/revenue/forms/njreg.pdf
OMNIA Partners
EXHIBIT F
ADVERTISING COMPLIANCE REQUIREMENT
Pursuant to certain state notice provisions, including but not limited to Oregon Revised Statutes Chapter 279A.220, the following public agencies and political subdivisions of the referenced public agencies are eligible to register with OMNIA Partners and access the Master Agreement contract award made pursuant to this solicitation, and are hereby given notice of the foregoing Invitation for Bids for purposes of complying with the procedural requirements of said statutes:
Nationwide:
State of Alabama State of Hawaii State of Massachusetts State of New Mexico State of South Dakota
State of Alaska State of Idaho State of Michigan State of New York State of Tennessee State of Arizona State of Illinois State of Minnesota State of North Carolina State of Texas State of Arkansas State of Indiana State of Mississippi State of North Dakota State of Utah State of California State of Iowa State of Missouri State of Ohio State of Vermont State of Colorado State of Kansas State of Montana State of Oklahoma State of Virginia State of Connecticut State of Kentucky State of Nebraska State of Oregon State of Washington State of Delaware State of Louisiana State of Nevada State of Pennsylvania State of West Virginia
State of Florida State of Maine State of New Hampshire State of Rhode Island State of Wisconsin State of Georgia State of Maryland State of New Jersey State of South Carolina State of Wyoming District of Columbia
Lists of political subdivisions and local governments in the above referenced states / districts may be found at http://www.usa.gov/Agencies/State_and_Territories.shtml and https://www.usa.gov/local-governments.
Certain Public Agencies and Political Subdivisions:
CITIES, TOWNS, VILLAGES AND BOROUGHS
INCLUDING BUT NOT LIMITED TO:
BAKER CITY GOLF COURSE, OR
CITY OF ADAIR VILLAGE, OR
CITY OF ASHLAND, OR
CITY OF AUMSVILLE, OR
CITY OF AURORA, OR
CITY OF BAKER, OR
CITY OF BATON ROUGE, LA
CITY OF BEAVERTON, OR
CITY OF BEND, OR
CITY OF BOARDMAN, OR
CITY OF BONANAZA, OR
CITY OF BOSSIER CITY, LA
CITY OF BROOKINGS, OR
CITY OF BURNS, OR
CITY OF CANBY, OR
CITY OF CANYONVILLE, OR
CITY OF CLATSKANIE, OR
CITY OF COBURG, OR
CITY OF CONDON, OR
CITY OF COQUILLE, OR
CITY OF CORVALLI, OR
CITY OF CORVALLIS PARKS AND RECREATION
DEPARTMENT, OR
CITY OF COTTAGE GROVE, OR
CITY OF DONALD, OR
CITY OF EUGENE, OR
CITY OF FOREST GROVE, OR
CITY OF GOLD HILL, OR
CITY OF GRANTS PASS, OR
CITY OF GRESHAM, OR
CITY OF HILLSBORO, OR
CITY OF INDEPENDENCE, OR
CITY AND COUNTY OF HONOLULU, HI
CITY OF KENNER, LA
CITY OF LA GRANDE, OR
CITY OF LAFAYETTE, LA
CITY OF LAKE CHARLES, OR
CITY OF LEBANON, OR
CITY OF MCMINNVILLE, OR
CITY OF MEDFORD, OR
CITY OF METAIRIE, LA
CITY OF MILL CITY, OR
CITY OF MILWAUKIE, OR
CITY OF MONROE, LA
CITY OF MOSIER, OR
CITY OF NEW ORLEANS, LA
CITY OF NORTH PLAINS, OR
CITY OF OREGON CITY, OR
CITY OF PILOT ROCK, OR
CITY OF PORTLAND, OR
CITY OF POWERS, OR
CITY OF PRINEVILLE, OR
CITY OF REDMOND, OR
CITY OF REEDSPORT, OR
CITY OF RIDDLE, OR
CITY OF ROGUE RIVER, OR
CITY OF ROSEBURG, OR
CITY OF SALEM, OR
CITY OF SANDY, OR
CITY OF SCAPPOOSE, OR
CITY OF SHADY COVE, OR
CITY OF SHERWOOD, OR
CITY OF SHREVEPORT, LA
CITY OF SILVERTON, OR
CITY OF SPRINGFIELD, OR
CITY OF ST. HELENS, OR
CITY OF ST. PAUL, OR
CITY OF SULPHUR, LA
CITY OF TIGARD, OR
CITY OF TROUTDALE, OR
CITY OF TUALATIN, OR
CITY OF WALKER, LA
CITY OF WARRENTON, OR
CITY OF WEST LINN, OR
CITY OF WILSONVILLE, OR
CITY OF WINSTON, OR
CITY OF WOODBURN, OR
LEAGUE OF OREGON CITES
THE CITY OF HAPPY VALLEY OREGON
ALPINE, UT
ALTA, UT
ALTAMONT, UT
ALTON, UT
AMALGA, UT
AMERICAN FORK CITY, UT
ANNABELLA, UT
ANTIMONY, UT
APPLE VALLEY, UT
AURORA, UT
BALLARD, UT
BEAR RIVER CITY, UT
BEAVER, UT
BICKNELL, UT
BIG WATER, UT
BLANDING, UT
BLUFFDALE, UT
BOULDER, UT
CITY OF BOUNTIFUL, UT
BRIAN HEAD, UT
BRIGHAM CITY CORPORATION, UT
BRYCE CANYON CITY, UT
CANNONVILLE, UT
CASTLE DALE, UT
CASTLE VALLEY, UT
CITY OF CEDAR CITY, UT
CEDAR FORT, UT
CITY OF CEDAR HILLS, UT
CENTERFIELD, UT
CENTERVILLE CITY CORPORATION, UT
CENTRAL VALLEY, UT
CHARLESTON, UT
CIRCLEVILLE, UT
CLARKSTON, UT
CLAWSON, UT
CLEARFIELD, UT
CLEVELAND, UT
CLINTON CITY CORPORATION, UT
COALVILLE, UT
CORINNE, UT
CORNISH, UT
COTTONWOOD HEIGHTS, UT
DANIEL, UT
DELTA, UT
DEWEYVILLE, UT
DRAPER CITY, UT
DUCHESNE, UT
EAGLE MOUNTAIN, UT
EAST CARBON, UT
ELK RIDGE, UT
ELMO, UT
ELSINORE, UT
ELWOOD, UT
EMERY, UT
ENOCH, UT
ENTERPRISE, UT
EPHRAIM, UT
ESCALANTE, UT
EUREKA, UT
FAIRFIELD, UT
FAIRVIEW, UT
FARMINGTON, UT
FARR WEST, UT
FAYETTE, UT
FERRON, UT
FIELDING, UT
FILLMORE, UT
FOUNTAIN GREEN, UT
FRANCIS, UT
FRUIT HEIGHTS, UT
GARDEN CITY, UT
GARLAND, UT
GENOLA, UT
GLENDALE, UT
GLENWOOD, UT
GOSHEN, UT
GRANTSVILLE, UT
GREEN RIVER, UT
GUNNISON, UT
HANKSVILLE, UT
HARRISVILLE, UT
HATCH, UT
HEBER CITY CORPORATION, UT
HELPER, UT
HENEFER, UT
HENRIEVILLE, UT
HERRIMAN, UT
HIDEOUT, UT
HIGHLAND, UT
HILDALE, UT
HINCKLEY, UT
HOLDEN, UT
HOLLADAY, UT
HONEYVILLE, UT
HOOPER, UT
HOWELL, UT
HUNTINGTON, UT
HUNTSVILLE, UT
CITY OF HURRICANE, UT
HYDE PARK, UT
HYRUM, UT
INDEPENDENCE, UT
IVINS, UT
JOSEPH, UT
JUNCTION, UT
KAMAS, UT
KANAB, UT
KANARRAVILLE, UT
KANOSH, UT
KAYSVILLE, UT
KINGSTON, UT
KOOSHAREM, UT
LAKETOWN, UT
LA VERKIN, UT
LAYTON, UT
LEAMINGTON, UT
LEEDS, UT
LEHI CITY CORPORATION, UT
LEVAN, UT
LEWISTON, UT
LINDON, UT
LOA, UT
LOGAN CITY, UT
LYMAN, UT
LYNNDYL, UT
MANILA, UT
MANTI, UT
MANTUA, UT
MAPLETON, UT
MARRIOTT-SLATERVILLE, UT
MARYSVALE, UT
MAYFIELD, UT
MEADOW, UT
MENDON, UT
MIDVALE CITY INC., UT
MIDWAY, UT
MILFORD, UT
MILLVILLE, UT
MINERSVILLE, UT
MOAB, UT
MONA, UT
MONROE, UT
CITY OF MONTICELLO, UT
MORGAN, UT
MORONI, UT
MOUNT PLEASANT, UT
MURRAY CITY CORPORATION, UT
MYTON, UT
NAPLES, UT
NEPHI, UT
NEW HARMONY, UT
NEWTON, UT
NIBLEY, UT
NORTH LOGAN, UT
NORTH OGDEN, UT
NORTH SALT LAKE CITY, UT
OAK CITY, UT
OAKLEY, UT
OGDEN CITY CORPORATION, UT
OPHIR, UT
ORANGEVILLE, UT
ORDERVILLE, UT
OREM, UT
PANGUITCH, UT
PARADISE, UT
PARAGONAH, UT
PARK CITY, UT
PAROWAN, UT
PAYSON, UT
PERRY, UT
PLAIN CITY, UT
PLEASANT GROVE CITY, UT
PLEASANT VIEW, UT
PLYMOUTH, UT
PORTAGE, UT
PRICE, UT
PROVIDENCE, UT
PROVO, UT
RANDOLPH, UT
REDMOND, UT
RICHFIELD, UT
RICHMOND, UT
RIVERDALE, UT
RIVER HEIGHTS, UT
RIVERTON CITY, UT
ROCKVILLE, UT
ROCKY RIDGE, UT
ROOSEVELT CITY CORPORATION, UT
ROY, UT
RUSH VALLEY, UT
CITY OF ST. GEORGE, UT
SALEM, UT
SALINA, UT
SALT LAKE CITY CORPORATION, UT
SANDY, UT
SANTA CLARA, UT
SANTAQUIN, UT
SARATOGA SPRINGS, UT
SCIPIO, UT
SCOFIELD, UT
SIGURD, UT
SMITHFIELD, UT
SNOWVILLE, UT
CITY OF SOUTH JORDAN, UT
SOUTH OGDEN, UT
CITY OF SOUTH SALT LAKE, UT
SOUTH WEBER, UT
SPANISH FORK, UT
SPRING CITY, UT
SPRINGDALE, UT
SPRINGVILLE, UT
STERLING, UT
STOCKTON, UT
SUNNYSIDE, UT
SUNSET CITY CORP, UT
SYRACUSE, UT
TABIONA, UT
CITY OF TAYLORSVILLE, UT
TOOELE CITY CORPORATION, UT
TOQUERVILLE, UT
TORREY, UT
TREMONTON CITY, UT
TRENTON, UT
TROPIC, UT
UINTAH, UT
VERNAL CITY, UT
VERNON, UT
VINEYARD, UT
VIRGIN, UT
WALES, UT
WALLSBURG, UT
WASHINGTON CITY, UT
WASHINGTON TERRACE, UT
WELLINGTON, UT
WELLSVILLE, UT
WENDOVER, UT
WEST BOUNTIFUL, UT
WEST HAVEN, UT
WEST JORDAN, UT
WEST POINT, UT
WEST VALLEY CITY, UT
WILLARD, UT
WOODLAND HILLS, UT
WOODRUFF, UT
WOODS CROSS, UT
COUNTIES AND PARISHES INCLUDING BUT NOT
LIMITED TO:
ASCENSION PARISH, LA
ASCENSION PARISH, LA, CLEAR OF COURT
CADDO PARISH, LA
CALCASIEU PARISH, LA
CALCASIEU PARISH SHERIFF’S OFFICE, LA
CITY AND COUNTY OF HONOLULU, HI
CLACKAMAS COUNTY, OR
CLACKAMAS COUNTY DEPT OF TRANSPORTATION,
OR
CLATSOP COUNTY, OR
COLUMBIA COUNTY, OR
COOS COUNTY, OR
COOS COUNTY HIGHWAY DEPARTMENT, OR
COUNTY OF HAWAII, OR
CROOK COUNTY, OR
CROOK COUNTY ROAD DEPARTMENT, OR
CURRY COUNTY, OR
DESCHUTES COUNTY, OR
DOUGLAS COUNTY, OR
EAST BATON ROUGE PARISH, LA
GILLIAM COUNTY, OR
GRANT COUNTY, OR
HARNEY COUNTY, OR
HARNEY COUNTY SHERIFFS OFFICE, OR
HAWAII COUNTY, HI
HOOD RIVER COUNTY, OR
JACKSON COUNTY, OR
JEFFERSON COUNTY, OR
JEFFERSON PARISH, LA
JOSEPHINE COUNTY GOVERNMENT, OR
LAFAYETTE CONSOLIDATED GOVERNMENT, LA
LAFAYETTE PARISH, LA
LAFAYETTE PARISH CONVENTION & VISITORS
COMMISSION
LAFOURCHE PARISH, LA
KAUAI COUNTY, HI
KLAMATH COUNTY, OR
LAKE COUNTY, OR
LANE COUNTY, OR
LINCOLN COUNTY, OR
LINN COUNTY, OR
LIVINGSTON PARISH, LA
MALHEUR COUNTY, OR
MAUI COUNTY, HI
MARION COUNTY, SALEM, OR
MORROW COUNTY, OR
MULTNOMAH COUNTY, OR
MULTNOMAH COUNTY BUSINESS AND
COMMUNITY SERVICES, OR
MULTNOMAH COUNTY SHERIFFS OFFICE, OR
MULTNOMAH LAW LIBRARY, OR
ORLEANS PARISH, LA
PLAQUEMINES PARISH, LA
POLK COUNTY, OR
RAPIDES PARISH, LA
SAINT CHARLES PARISH, LA
SAINT CHARLES PARISH PUBLIC SCHOOLS, LA
SAINT LANDRY PARISH, LA
SAINT TAMMANY PARISH, LA
SHERMAN COUNTY, OR
TERREBONNE PARISH, LA
TILLAMOOK COUNTY, OR
TILLAMOOK COUNTY SHERIFF'S OFFICE, OR
TILLAMOOK COUNTY GENERAL HOSPITAL, OR
UMATILLA COUNTY, OR
UNION COUNTY, OR
WALLOWA COUNTY, OR
WASCO COUNTY, OR
WASHINGTON COUNTY, OR
WEST BATON ROUGE PARISH, LA
WHEELER COUNTY, OR
YAMHILL COUNTY, OR
COUNTY OF BOX ELDER, UT
COUNTY OF CACHE, UT
COUNTY OF RICH, UT
COUNTY OF WEBER, UT
COUNTY OF MORGAN, UT
COUNTY OF DAVIS, UT
COUNTY OF SUMMIT, UT
COUNTY OF DAGGETT, UT
COUNTY OF SALT LAKE, UT
COUNTY OF TOOELE, UT
COUNTY OF UTAH, UT
COUNTY OF WASATCH, UT
COUNTY OF DUCHESNE, UT
COUNTY OF UINTAH, UT
COUNTY OF CARBON, UT
COUNTY OF SANPETE, UT
COUNTY OF JUAB, UT
COUNTY OF MILLARD, UT
COUNTY OF SEVIER, UT
COUNTY OF EMERY, UT
COUNTY OF GRAND, UT
COUNTY OF BEVER, UT
COUNTY OF PIUTE, UT
COUNTY OF WAYNE, UT
COUNTY OF SAN JUAN, UT
COUNTY OF GARFIELD, UT
COUNTY OF KANE, UT
COUNTY OF IRON, UT
COUNTY OF WASHINGTON, UT
OTHER AGENCIES INCLUDING ASSOCIATIONS,
BOARDS, DISTRICTS, COMMISSIONS, COUNCILS,
PUBLIC CORPORATIONS, PUBLIC DEVELOPMENT
AUTHORITIES, RESERVATIONS AND UTILITIES
INCLUDING BUT NOT LIMITED TO:
ADAIR R.F.P.D., OR
ADEL WATER IMPROVEMENT DISTRICT, OR
ADRIAN R.F.P.D., OR
AGNESS COMMUNITY LIBRARY, OR
AGNESS-ILLAHE R.F.P.D., OR
AGRICULTURE EDUCATION SERVICE EXTENSION
DISTRICT, OR
ALDER CREEK-BARLOW WATER DISTRICT NO. 29,
OR
ALFALFA FIRE DISTRICT, OR
ALSEA R.F.P.D., OR
ALSEA RIVIERA WATER IMPROVEMENT DISTRICT,
OR
AMITY FIRE DISTRICT, OR
ANTELOPE MEADOWS SPECIAL ROAD DISTRICT, OR
APPLE ROGUE DISTRICT IMPROVEMENT COMPANY,
OR
APPLEGATE VALLEY R.F.P.D. #9, OR
ARCH CAPE DOMESTIC WATER SUPPLY DISTRICT,
OR
ARCH CAPE SANITARY DISTRICT, OR
ARNOLD IRRIGATION DISTRICT, OR
ASH CREEK WATER CONTROL DISTRICT, OR
ATHENA CEMETERY MAINTENANCE DISTRICT, OR
AUMSVILLE R.F.P.D., OR
AURORA R.F.P.D., OR
AZALEA R.F.P.D., OR
BADGER IMPROVEMENT DISTRICT, OR
BAILEY-SPENCER R.F.P.D., OR
BAKER COUNTY LIBRARY DISTRICT, OR
BAKER R.F.P.D., OR
BAKER RIVERTON ROAD DISTRICT, OR
BAKER VALLEY IRRIGATION DISTRICT, OR
BAKER VALLEY S.W.C.D., OR
BAKER VALLEY VECTOR CONTROL DISTRICT, OR
BANDON CRANBERRY WATER CONTROL DISTRICT,
OR
BANDON R.F.P.D., OR
BANKS FIRE DISTRICT, OR
BANKS FIRE DISTRICT #13, OR
BAR L RANCH ROAD DISTRICT, OR
BARLOW WATER IMPROVEMENT DISTRICT, OR
BASIN AMBULANCE SERVICE DISTRICT, OR
BASIN TRANSIT SERVICE TRANSPORTATION
DISTRICT, OR
BATON ROUGE WATER COMPANY
BAY AREA HEALTH DISTRICT, OR
BAYSHORE SPECIAL ROAD DISTRICT, OR
BEAR VALLEY SPECIAL ROAD DISTRICT, OR
BEAVER CREEK WATER CONTROL DISTRICT, OR
BEAVER DRAINAGE IMPROVEMENT COMPANY,
INC., OR
BEAVER SLOUGH DRAINAGE DISTRICT, OR
BEAVER SPECIAL ROAD DISTRICT, OR
BEAVER WATER DISTRICT, OR
BELLE MER S.I.G.L. TRACTS SPECIAL ROAD
DISTRICT, OR
BEND METRO PARK AND RECREATION DISTRICT
BENTON S.W.C.D., OR
BERNDT SUBDIVISION WATER IMPROVEMENT
DISTRICT, OR
BEVERLY BEACH WATER DISTRICT, OR
BIENVILLE PARISH FIRE PROTECTION DISTRICT 6,
LA
BIG BEND IRRIGATION DISTRICT, OR
BIGGS SERVICE DISTRICT, OR
BLACK BUTTE RANCH DEPARTMENT OF POLICE
SERVICES, OR
BLACK BUTTE RANCH R.F.P.D., OR
BLACK MOUNTAIN WATER DISTRICT, OR
BLODGETT-SUMMIT R.F.P.D., OR
BLUE MOUNTAIN HOSPITAL DISTRICT, OR
BLUE MOUNTAIN TRANSLATOR DISTRICT, OR
BLUE RIVER PARK & RECREATION DISTRICT, OR
BLUE RIVER WATER DISTRICT, OR
BLY R.F.P.D., OR
BLY VECTOR CONTROL DISTRICT, OR
BLY WATER AND SANITARY DISTRICT, OR
BOARDMAN CEMETERY MAINTENANCE DISTRICT,
OR
BOARDMAN PARK AND RECREATION DISTRICT
BOARDMAN R.F.P.D., OR
BONANZA BIG SPRINGS PARK & RECREATION
DISTRICT, OR
BONANZA MEMORIAL PARK CEMETERY DISTRICT,
OR
BONANZA R.F.P.D., OR
BONANZA-LANGELL VALLEY VECTOR CONTROL
DISTRICT, OR
BORING WATER DISTRICT #24, OR
BOULDER CREEK RETREAT SPECIAL ROAD
DISTRICT, OR
BRIDGE R.F.P.D., OR
BROOKS COMMUNITY SERVICE DISTRICT, OR
BROWNSVILLE R.F.P.D., OR
BUELL-RED PRAIRIE WATER DISTRICT, OR
BUNKER HILL R.F.P.D. #1, OR
BUNKER HILL SANITARY DISTRICT, OR
BURLINGTON WATER DISTRICT, OR
BURNT RIVER IRRIGATION DISTRICT, OR
BURNT RIVER S.W.C.D., OR
CALAPOOIA R.F.P.D., OR
CAMAS VALLEY R.F.P.D., OR
CAMELLIA PARK SANITARY DISTRICT, OR
CAMMANN ROAD DISTRICT, OR
CAMP SHERMAN ROAD DISTRICT, OR
CANBY AREA TRANSIT, OR
CANBY R.F.P.D. #62, OR
CANBY UTILITY BOARD, OR
CANNON BEACH R.F.P.D., OR
CANYONVILLE SOUTH UMPQUA FIRE DISTRICT, OR
CAPE FERRELO R.F.P.D., OR
CAPE FOULWEATHER SANITARY DISTRICT, OR
CARLSON PRIMROSE SPECIAL ROAD DISTRICT, OR
CARMEL BEACH WATER DISTRICT, OR
CASCADE VIEW ESTATES TRACT 2, OR
CEDAR CREST SPECIAL ROAD DISTRICT, OR
CEDAR TRAILS SPECIAL ROAD DISTRICT, OR
CEDAR VALLEY - NORTH BANK R.F.P.D., OR
CENTRAL CASCADES FIRE AND EMS, OR
CENTRAL CITY ECONOMIC OPPORTUNITY CORP, LA
CENTRAL LINCOLN P.U.D., OR
CENTRAL OREGON COAST FIRE & RESCUE
DISTRICT, OR
CENTRAL OREGON INTERGOVERNMENTAL
COUNCIL
CENTRAL OREGON IRRIGATION DISTRICT, OR
CHAPARRAL WATER CONTROL DISTRICT, OR
CHARLESTON FIRE DISTRICT, OR
CHARLESTON SANITARY DISTRICT, OR
CHARLOTTE ANN WATER DISTRICT, OR
CHEHALEM PARK & RECREATION DISTRICT, OR
CHEHALEM PARK AND RECREATION DISTRICT
CHEMULT R.F.P.D., OR
CHENOWITH WATER P.U.D., OR
CHERRIOTS, OR
CHETCO COMMUNITY PUBLIC LIBRARY DISTRICT,
OR
CHILOQUIN VECTOR CONTROL DISTRICT, OR
CHILOQUIN-AGENCY LAKE R.F.P.D., OR
CHINOOK DRIVE SPECIAL ROAD DISTRICT, OR
CHR DISTRICT IMPROVEMENT COMPANY, OR
CHRISTMAS VALLEY DOMESTIC WATER DISTRICT,
OR
CHRISTMAS VALLEY PARK & RECREATION
DISTRICT, OR
CHRISTMAS VALLEY R.F.P.D., OR
CITY OF BOGALUSA SCHOOL BOARD, LA
CLACKAMAS COUNTY FIRE DISTRICT #1, OR
CLACKAMAS COUNTY SERVICE DISTRICT #1, OR
CLACKAMAS COUNTY VECTOR CONTROL
DISTRICT, OR
CLACKAMAS RIVER WATER
CLACKAMAS RIVER WATER, OR
CLACKAMAS S.W.C.D., OR
CLATSKANIE DRAINAGE IMPROVEMENT
COMPANY, OR
CLATSKANIE LIBRARY DISTRICT, OR
CLATSKANIE P.U.D., OR
CLATSKANIE PARK & RECREATION DISTRICT, OR
CLATSKANIE PEOPLE'S UTILITY DISTRICT
CLATSKANIE R.F.P.D., OR
CLATSOP CARE CENTER HEALTH DISTRICT, OR
CLATSOP COUNTY S.W.C.D., OR
CLATSOP DRAINAGE IMPROVEMENT COMPANY #15,
INC., OR
CLEAN WATER SERVICES
CLEAN WATER SERVICES, OR
CLOVERDALE R.F.P.D., OR
CLOVERDALE SANITARY DISTRICT, OR
CLOVERDALE WATER DISTRICT, OR
COALEDO DRAINAGE DISTRICT, OR
COBURG FIRE DISTRICT, OR
COLESTIN RURAL FIRE DISTRICT, OR
COLTON R.F.P.D., OR
COLTON WATER DISTRICT #11, OR
COLUMBIA 911 COMMUNICATIONS DISTRICT, OR
COLUMBIA COUNTY 4-H & EXTENSION SERVICE
DISTRICT, OR
COLUMBIA DRAINAGE VECTOR CONTROL, OR
COLUMBIA IMPROVEMENT DISTRICT, OR
COLUMBIA R.F.P.D., OR
COLUMBIA RIVER FIRE & RESCUE, OR
COLUMBIA RIVER PUD, OR
COLUMBIA S.W.C.D., OR
COLUMBIA S.W.C.D., OR
CONFEDERATED TRIBES OF THE UMATILLA INDIAN
RESERVATION
COOS COUNTY AIRPORT DISTRICT, OR
COOS COUNTY AIRPORT DISTRICT, OR
COOS COUNTY AREA TRANSIT SERVICE DISTRICT,
OR
COOS COUNTY AREA TRANSIT SERVICE DISTRICT,
OR
COOS FOREST PROTECTIVE ASSOCIATION
COOS S.W.C.D., OR
COQUILLE R.F.P.D., OR
COQUILLE VALLEY HOSPITAL DISTRICT, OR
CORBETT WATER DISTRICT, OR
CORNELIUS R.F.P.D., OR
CORP RANCH ROAD WATER IMPROVEMENT, OR
CORVALLIS R.F.P.D., OR
COUNTRY CLUB ESTATES SPECIAL WATER
DISTRICT, OR
COUNTRY CLUB WATER DISTRICT, OR
COUNTRY ESTATES ROAD DISTRICT, OR
COVE CEMETERY MAINTENANCE DISTRICT, OR
COVE ORCHARD SEWER SERVICE DISTRICT, OR
COVE R.F.P.D., OR
CRESCENT R.F.P.D., OR
CRESCENT SANITARY DISTRICT, OR
CRESCENT WATER SUPPLY AND IMPROVEMENT
DISTRICT, OR
CROOK COUNTY AGRICULTURE EXTENSION
SERVICE DISTRICT, OR
CROOK COUNTY CEMETERY DISTRICT, OR
CROOK COUNTY FIRE AND RESCUE, OR
CROOK COUNTY PARKS & RECREATION DISTRICT,
OR
CROOK COUNTY S.W.C.D., OR
CROOK COUNTY VECTOR CONTROL DISTRICT, OR
CROOKED RIVER RANCH R.F.P.D., OR
CROOKED RIVER RANCH SPECIAL ROAD DISTRICT,
OR
CRYSTAL SPRINGS WATER DISTRICT, OR
CURRY COUNTY 4-H & EXTENSION SERVICE
DISTRICT, OR
CURRY COUNTY PUBLIC TRANSIT SERVICE
DISTRICT, OR
CURRY COUNTY S.W.C.D., OR
CURRY HEALTH DISTRICT, OR
CURRY PUBLIC LIBRARY DISTRICT, OR
DALLAS CEMETERY DISTRICT #4, OR
DARLEY DRIVE SPECIAL ROAD DISTRICT, OR
DAVID CROCKETT STEAM FIRE COMPANY #1, LA
DAYS CREEK R.F.P.D., OR
DAYTON FIRE DISTRICT, OR
DEAN MINARD WATER DISTRICT, OR
DEE IRRIGATION DISTRICT, OR
DEER ISLAND DRAINAGE IMPROVEMENT
COMPANY, OR
DELL BROGAN CEMETERY MAINTENANCE
DISTRICT, OR
DEPOE BAY R.F.P.D., OR
DESCHUTES COUNTY 911 SERVICE DISTRICT, OR
DESCHUTES COUNTY R.F.P.D. #2, OR
DESCHUTES PUBLIC LIBRARY DISTRICT, OR
DESCHUTES S.W.C.D., OR
DESCHUTES VALLEY WATER DISTRICT, OR
DEVILS LAKE WATER IMPROVEMENT DISTRICT, OR
DEXTER R.F.P.D., OR
DEXTER SANITARY DISTRICT, OR
DORA-SITKUM R.F.P.D., OR
DOUGLAS COUNTY FIRE DISTRICT #2, OR
DOUGLAS S.W.C.D., OR
DRAKES CROSSING R.F.P.D., OR
DRRH SPECIAL ROAD DISTRICT #6, OR
DRY GULCH DITCH DISTRICT IMPROVEMENT
COMPANY, OR
DUFUR RECREATION DISTRICT, OR
DUMBECK LANE DOMESTIC WATER SUPPLY, OR
DUNDEE R.F.P.D., OR
DURKEE COMMUNITY BUILDING PRESERVATION
DISTRICT, OR
EAGLE POINT IRRIGATION DISTRICT, OR
EAGLE VALLEY CEMETERY MAINTENANCE
DISTRICT, OR
EAGLE VALLEY R.F.P.D., OR
EAGLE VALLEY S.W.C.D., OR
EAST FORK IRRIGATION DISTRICT, OR
EAST MULTNOMAH S.W.C.D., OR
EAST SALEM SERVICE DISTRICT, OR
EAST UMATILLA CHEMICAL CONTROL DISTRICT,
OR
EAST UMATILLA COUNTY AMBULANCE AREA
HEALTH DISTRICT, OR
EAST UMATILLA COUNTY R.F.P.D., OR
EAST VALLEY WATER DISTRICT, OR
ELGIN COMMUNITY PARKS & RECREATION
DISTRICT, OR
ELGIN HEALTH DISTRICT, OR
ELGIN R.F.P.D., OR
ELKTON ESTATES PHASE II SPECIAL ROAD
DISTRICT, OR
ELKTON R.F.P.D., OR
EMERALD P.U.D., OR
ENTERPRISE IRRIGATION DISTRICT, OR
ESTACADA CEMETERY MAINTENANCE DISTRICT,
OR
ESTACADA R.F.P.D. #69, OR
EUGENE R.F.P.D. # 1, OR
EUGENE WATER AND ELECTRIC BOARD
EVANS VALLEY FIRE DISTRICT #6, OR
FAIR OAKS R.F.P.D., OR
FAIRVIEW R.F.P.D., OR
FAIRVIEW WATER DISTRICT, OR
FALCON HEIGHTS WATER AND SEWER, OR
FALCON-COVE BEACH WATER DISTRICT, OR
FALL RIVER ESTATES SPECIAL ROAD DISTRICT, OR
FARGO INTERCHANGE SERVICE DISTRICT, OR
FARMERS IRRIGATION DISTRICT, OR
FAT ELK DRAINAGE DISTRICT, OR
FERN RIDGE PUBLIC LIBRARY DISTRICT, OR
FERN VALLEY ESTATES IMPROVEMENT DISTRICT,
OR
FOR FAR ROAD DISTRICT, OR
FOREST GROVE R.F.P.D., OR
FOREST VIEW SPECIAL ROAD DISTRICT, OR
FORT ROCK-SILVER LAKE S.W.C.D., OR
FOUR RIVERS VECTOR CONTROL DISTRICT, OR
FOX CEMETERY MAINTENANCE DISTRICT, OR
GARDINER R.F.P.D., OR
GARDINER SANITARY DISTRICT, OR
GARIBALDI R.F.P.D., OR
GASTON R.F.P.D., OR
GATES R.F.P.D., OR
GEARHART R.F.P.D., OR
GILLIAM S.W.C.D., OR
GLENDALE AMBULANCE DISTRICT, OR
GLENDALE R.F.P.D., OR
GLENEDEN BEACH SPECIAL ROAD DISTRICT, OR
GLENEDEN SANITARY DISTRICT, OR
GLENWOOD WATER DISTRICT, OR
GLIDE - IDLEYLD SANITARY DISTRICT, OR
GLIDE R.F.P.D., OR
GOLD BEACH - WEDDERBURN R.F.P.D., OR
GOLD HILL IRRIGATION DISTRICT, OR
GOLDFINCH ROAD DISTRICT, OR
GOSHEN R.F.P.D., OR
GOVERNMENT CAMP ROAD DISTRICT, OR
GOVERNMENT CAMP SANITARY DISTRICT, OR
GRAND PRAIRIE WATER CONTROL DISTRICT, OR
GRAND RONDE SANITARY DISTRICT, OR
GRANT COUNTY TRANSPORTATION DISTRICT, OR
GRANT S.W.C.D., OR
GRANTS PASS IRRIGATION DISTRICT, OR
GREATER BOWEN VALLEY R.F.P.D., OR
GREATER ST. HELENS PARK & RECREATION
DISTRICT, OR
GREATER TOLEDO POOL RECREATION DISTRICT,
OR
GREEN KNOLLS SPECIAL ROAD DISTRICT, OR
GREEN SANITARY DISTRICT, OR
GREENACRES R.F.P.D., OR
GREENBERRY IRRIGATION DISTRICT, OR
GREENSPRINGS RURAL FIRE DISTRICT, OR
HAHLEN ROAD SPECIAL DISTRICT, OR
HAINES CEMETERY MAINTENANCE DISTRICT, OR
HAINES FIRE PROTECTION DISTRICT, OR
HALSEY-SHEDD R.F.P.D., OR
HAMLET R.F.P.D., OR
HARBOR R.F.P.D., OR
HARBOR SANITARY DISTRICT, OR
HARBOR WATER P.U.D., OR
HARNEY COUNTY HEALTH DISTRICT, OR
HARNEY S.W.C.D., OR
HARPER SOUTH SIDE IRRIGATION DISTRICT, OR
HARRISBURG FIRE AND RESCUE, OR
HAUSER R.F.P.D., OR
HAZELDELL RURAL FIRE DISTRICT, OR
HEBO JOINT WATER-SANITARY AUTHORITY, OR
HECETA WATER P.U.D., OR
HELIX CEMETERY MAINTENANCE DISTRICT #4, OR
HELIX PARK & RECREATION DISTRICT, OR
HELIX R.F.P.D. #7-411, OR
HEPPNER CEMETERY MAINTENANCE DISTRICT, OR
HEPPNER R.F.P.D., OR
HEPPNER WATER CONTROL DISTRICT, OR
HEREFORD COMMUNITY HALL RECREATION
DISTRICT, OR
HERMISTON CEMETERY DISTRICT, OR
HERMISTON IRRIGATION DISTRICT, OR
HIDDEN VALLEY MOBILE ESTATES IMPROVEMENT
DISTRICT, OR
HIGH DESERT PARK & RECREATION DISTRICT, OR
HIGHLAND SUBDIVISION WATER DISTRICT, OR
HONOLULU INTERNATIONAL AIRPORT
HOOD RIVER COUNTY LIBRARY DISTRICT, OR
HOOD RIVER COUNTY TRANSPORTATION DISTRICT,
OR
HOOD RIVER S.W.C.D., OR
HOOD RIVER VALLEY PARKS & RECREATION
DISTRICT, OR
HOODLAND FIRE DISTRICT #74
HOODLAND FIRE DISTRICT #74, OR
HORSEFLY IRRIGATION DISTRICT, OR
HOSKINS-KINGS VALLEY R.F.P.D., OR
HOUSING AUTHORITY OF PORTLAND
HUBBARD R.F.P.D., OR
HUDSON BAY DISTRICT IMPROVEMENT COMPANY,
OR
I N (KAY) YOUNG DITCH DISTRICT IMPROVEMENT
COMPANY, OR
ICE FOUNTAIN WATER DISTRICT, OR
IDAHO POINT SPECIAL ROAD DISTRICT, OR
IDANHA-DETROIT RURAL FIRE PROTECTION
DISTRICT, OR
ILLINOIS VALLEY FIRE DISTRICT
ILLINOIS VALLEY R.F.P.D., OR
ILLINOIS VALLEY S.W.C.D., OR
IMBLER R.F.P.D., OR
INTERLACHEN WATER P.U.D., OR
IONE LIBRARY DISTRICT, OR
IONE R.F.P.D. #6-604, OR
IRONSIDE CEMETERY MAINTENANCE DISTRICT, OR
IRONSIDE RURAL ROAD DISTRICT #5, OR
IRRIGON PARK & RECREATION DISTRICT, OR
IRRIGON R.F.P.D., OR
ISLAND CITY AREA SANITATION DISTRICT, OR
ISLAND CITY CEMETERY MAINTENANCE DISTRICT,
OR
JACK PINE VILLAGE SPECIAL ROAD DISTRICT, OR
JACKSON COUNTY FIRE DISTRICT #3, OR
JACKSON COUNTY FIRE DISTRICT #4, OR
JACKSON COUNTY FIRE DISTRICT #5, OR
JACKSON COUNTY LIBRARY DISTRICT, OR
JACKSON COUNTY VECTOR CONTROL DISTRICT, OR
JACKSON S.W.C.D., OR
JASPER KNOLLS WATER DISTRICT, OR
JEFFERSON COUNTY EMERGENCY MEDICAL
SERVICE DISTRICT, OR
JEFFERSON COUNTY FIRE DISTRICT #1, OR
JEFFERSON COUNTY LIBRARY DISTRICT, OR
JEFFERSON COUNTY S.W.C.D., OR
JEFFERSON PARK & RECREATION DISTRICT, OR
JEFFERSON R.F.P.D., OR
JOB'S DRAINAGE DISTRICT, OR
JOHN DAY WATER DISTRICT, OR
JOHN DAY-CANYON CITY PARKS & RECREATION
DISTRICT, OR
JOHN DAY-FERNHILL R.F.P.D. #5-108, OR
JORDAN VALLEY CEMETERY DISTRICT, OR
JORDAN VALLEY IRRIGATION DISTRICT, OR
JOSEPHINE COMMUNITY LIBRARY DISTRICT, OR
JOSEPHINE COUNTY 4-H & EXTENSION SERVICE
DISTRICT, OR
JOSEPHINE COUNTY 911 AGENCY, OR
JUNCTION CITY R.F.P.D., OR
JUNCTION CITY WATER CONTROL DISTRICT, OR
JUNIPER BUTTE ROAD DISTRICT, OR
JUNIPER CANYON WATER CONTROL DISTRICT, OR
JUNIPER FLAT DISTRICT IMPROVEMENT COMPANY,
OR
JUNIPER FLAT R.F.P.D., OR
JUNO NONPROFIT WATER IMPROVEMENT
DISTRICT, OR
KEATING R.F.P.D., OR
KEATING S.W.C.D., OR
KEIZER R.F.P.D., OR
KELLOGG RURAL FIRE DISTRICT, OR
KENO IRRIGATION DISTRICT, OR
KENO PINES ROAD DISTRICT, OR
KENO R.F.P.D., OR
KENT WATER DISTRICT, OR
KERBY WATER DISTRICT, OR
K-GB-LB WATER DISTRICT, OR
KILCHIS WATER DISTRICT, OR
KLAMATH 9-1-1 COMMUNICATIONS DISTRICT, OR
KLAMATH BASIN IMPROVEMENT DISTRICT, OR
KLAMATH COUNTY DRAINAGE SERVICE DISTRICT,
OR
KLAMATH COUNTY EXTENSION SERVICE DISTRICT,
OR
KLAMATH COUNTY FIRE DISTRICT #1, OR
KLAMATH COUNTY FIRE DISTRICT #3, OR
KLAMATH COUNTY FIRE DISTRICT #4, OR
KLAMATH COUNTY FIRE DISTRICT #5, OR
KLAMATH COUNTY LIBRARY SERVICE DISTRICT,
OR
KLAMATH COUNTY PREDATORY ANIMAL
CONTROL DISTRICT, OR
KLAMATH DRAINAGE DISTRICT, OR
KLAMATH FALLS FOREST ESTATES SPECIAL ROAD
DISTRICT UNIT #2, OR
KLAMATH INTEROPERABILITY RADIO GROUP, OR
KLAMATH IRRIGATION DISTRICT, OR
KLAMATH RIVER ACRES SPECIAL ROAD DISTRICT,
OR
KLAMATH S.W.C.D., OR
KLAMATH VECTOR CONTROL DISTRICT, OR
KNAPPA-SVENSEN-BURNSIDE R.F.P.D., OR
LA GRANDE CEMETERY MAINTENANCE DISTRICT,
OR
LA GRANDE R.F.P.D., OR
LA PINE PARK & RECREATION DISTRICT, OR
LA PINE R.F.P.D., OR
LABISH VILLAGE SEWAGE & DRAINAGE, OR
LACOMB IRRIGATION DISTRICT, OR
LAFAYETTE AIRPORT COMMISSION, LA
LAFOURCHE PARISH HEALTH UNIT – DHH-OPH
REGION 3
LAIDLAW WATER DISTRICT, OR
LAKE CHINOOK FIRE & RESCUE, OR
LAKE COUNTY 4-H & EXTENSION SERVICE
DISTRICT, OR
LAKE COUNTY LIBRARY DISTRICT, OR
LAKE CREEK R.F.P.D. - JACKSON, OR
LAKE CREEK R.F.P.D. - LANE COUNTY, OR
LAKE DISTRICT HOSPITAL, OR
LAKE GROVE R.F.P.D. NO. 57, OR
LAKE GROVE WATER DISTRICT, OR
LAKE LABISH WATER CONTROL DISTRICT, OR
LAKE POINT SPECIAL ROAD DISTRICT, OR
LAKESIDE R.F.P.D. #4, OR
LAKESIDE WATER DISTRICT, OR
LAKEVIEW R.F.P.D., OR
LAKEVIEW S.W.C.D., OR
LAMONTAI IMPROVEMENT DISTRICT, OR
LANE FIRE AUTHORITY, OR
LANE LIBRARY DISTRICT, OR
LANE TRANSIT DISTRICT, OR
LANGELL VALLEY IRRIGATION DISTRICT, OR
LANGLOIS PUBLIC LIBRARY, OR
LANGLOIS R.F.P.D., OR
LANGLOIS WATER DISTRICT, OR
LAZY RIVER SPECIAL ROAD DISTRICT, OR
LEBANON AQUATIC DISTRICT, OR
LEBANON R.F.P.D., OR
LEWIS & CLARK R.F.P.D., OR
LINCOLN COUNTY LIBRARY DISTRICT, OR
LINCOLN S.W.C.D., OR
LINN COUNTY EMERGENCY TELEPHONE AGENCY,
OR
LINN S.W.C.D., OR
LITTLE MUDDY CREEK WATER CONTROL, OR
LITTLE NESTUCCA DRAINAGE DISTRICT, OR
LITTLE SWITZERLAND SPECIAL ROAD DISTRICT, OR
LONE PINE IRRIGATION DISTRICT, OR
LONG PRAIRIE WATER DISTRICT, OR
LOOKINGGLASS OLALLA WATER CONTROL
DISTRICT, OR
LOOKINGGLASS RURAL FIRE DISTRICT, OR
LORANE R.F.P.D., OR
LOST & BOULDER DITCH IMPROVEMENT DISTRICT,
OR
LOST CREEK PARK SPECIAL ROAD DISTRICT, OR
LOUISIANA PUBLIC SERVICE COMMISSION, LA
LOUISIANA WATER WORKS
LOWELL R.F.P.D., OR
LOWER MCKAY CREEK R.F.P.D., OR
LOWER MCKAY CREEK WATER CONTROL
DISTRICT, OR
LOWER POWDER RIVER IRRIGATION DISTRICT, OR
LOWER SILETZ WATER DISTRICT, OR
LOWER UMPQUA HOSPITAL DISTRICT, OR
LOWER UMPQUA PARK & RECREATION DISTRICT,
OR
LOWER VALLEY WATER IMPROVEMENT DISTRICT,
OR
LUCE LONG DITCH DISTRICT IMPROVEMENT CO.,
OR
LUSTED WATER DISTRICT, OR
LYONS R.F.P.D., OR
LYONS-MEHAMA WATER DISTRICT, OR
MADRAS AQUATIC CENTER DISTRICT, OR
MAKAI SPECIAL ROAD DISTRICT, OR
MALHEUR COUNTY S.W.C.D., OR
MALHEUR COUNTY VECTOR CONTROL DISTRICT,
OR
MALHEUR DISTRICT IMPROVEMENT COMPANY, OR
MALHEUR DRAINAGE DISTRICT, OR
MALHEUR MEMORIAL HEALTH DISTRICT, OR
MALIN COMMUNITY CEMETERY MAINTENANCE
DISTRICT, OR
MALIN COMMUNITY PARK & RECREATION
DISTRICT, OR
MALIN IRRIGATION DISTRICT, OR
MALIN R.F.P.D., OR
MAPLETON FIRE DEPARTMENT, OR
MAPLETON WATER DISTRICT, OR
MARCOLA WATER DISTRICT, OR
MARION COUNTY EXTENSION & 4H SERVICE
DISTRICT, OR
MARION COUNTY FIRE DISTRICT #1, OR
MARION JACK IMPROVEMENT DISTRICT, OR
MARION S.W.C.D., OR
MARY'S RIVER ESTATES ROAD DISTRICT, OR
MCDONALD FOREST ESTATES SPECIAL ROAD
DISTRICT, OR
MCKAY ACRES IMPROVEMENT DISTRICT, OR
MCKAY DAM R.F.P.D. # 7-410, OR
MCKENZIE FIRE & RESCUE, OR
MCKENZIE PALISADES WATER SUPPLY
CORPORATION, OR
MCMINNVILLE R.F.P.D., OR
MCNULTY WATER P.U.D., OR
MEADOWS DRAINAGE DISTRICT, OR
MEDFORD IRRIGATION DISTRICT, OR
MEDFORD R.F.P.D. #2, OR
MEDFORD WATER COMMISSION
MEDICAL SPRINGS R.F.P.D., OR
MELHEUR COUNTY JAIL, OR
MERLIN COMMUNITY PARK DISTRICT, OR
MERRILL CEMETERY MAINTENANCE DISTRICT, OR
MERRILL PARK DISTRICT, OR
MERRILL R.F.P.D., OR
METRO REGIONAL GOVERNMENT
METRO REGIONAL PARKS
METROPOLITAN EXPOSITION RECREATION
COMMISSION
METROPOLITAN SERVICE DISTRICT (METRO)
MID COUNTY CEMETERY MAINTENANCE DISTRICT,
OR
MID-COLUMBIA FIRE AND RESCUE, OR
MIDDLE FORK IRRIGATION DISTRICT, OR
MIDLAND COMMUNITY PARK, OR
MIDLAND DRAINAGE IMPROVEMENT DISTRICT, OR
MILES CROSSING SANITARY SEWER DISTRICT, OR
MILL CITY R.F.P.D. #2-303, OR
MILL FOUR DRAINAGE DISTRICT, OR
MILLICOMA RIVER PARK & RECREATION DISTRICT,
OR
MILLINGTON R.F.P.D. #5, OR
MILO VOLUNTEER FIRE DEPARTMENT, OR
MILTON-FREEWATER AMBULANCE SERVICE AREA
HEALTH DISTRICT, OR
MILTON-FREEWATER WATER CONTROL DISTRICT,
OR
MIROCO SPECIAL ROAD DISTRICT, OR
MIST-BIRKENFELD R.F.P.D., OR
MODOC POINT IRRIGATION DISTRICT, OR
MODOC POINT SANITARY DISTRICT, OR
MOHAWK VALLEY R.F.P.D., OR
MOLALLA AQUATIC DISTRICT, OR
MOLALLA R.F.P.D. #73, OR
MONITOR R.F.P.D., OR
MONROE R.F.P.D., OR
MONUMENT CEMETERY MAINTENANCE DISTRICT,
OR
MONUMENT S.W.C.D., OR
MOOREA DRIVE SPECIAL ROAD DISTRICT, OR
MORO R.F.P.D., OR
MORROW COUNTY HEALTH DISTRICT, OR
MORROW COUNTY UNIFIED RECREATION
DISTRICT, OR
MORROW S.W.C.D., OR
MOSIER FIRE DISTRICT, OR
MOUNTAIN DRIVE SPECIAL ROAD DISTRICT, OR
MT. ANGEL R.F.P.D., OR
MT. HOOD IRRIGATION DISTRICT, OR
MT. LAKI CEMETERY DISTRICT, OR
MT. VERNON R.F.P.D., OR
MULINO WATER DISTRICT #1, OR
MULTNOMAH COUNTY DRAINAGE DISTRICT #1, OR
MULTNOMAH COUNTY R.F.P.D. #10, OR
MULTNOMAH COUNTY R.F.P.D. #14, OR
MULTNOMAH EDUCATION SERVICE DISTRICT
MYRTLE CREEK R.F.P.D., OR
NEAH-KAH-NIE WATER DISTRICT, OR
NEDONNA R.F.P.D., OR
NEHALEM BAY FIRE AND RESCUE, OR
NEHALEM BAY HEALTH DISTRICT, OR
NEHALEM BAY WASTEWATER AGENCY, OR
NESIKA BEACH-OPHIR WATER DISTRICT, OR
NESKOWIN REGIONAL SANITARY AUTHORITY, OR
NESKOWIN REGIONAL WATER DISTRICT, OR
NESTUCCA R.F.P.D., OR
NETARTS WATER DISTRICT, OR
NETARTS-OCEANSIDE R.F.P.D., OR
NETARTS-OCEANSIDE SANITARY DISTRICT, OR
NEW BRIDGE WATER SUPPLY DISTRICT, OR
NEW CARLTON FIRE DISTRICT, OR
NEW ORLEANS REDEVELOPMENT AUTHORITY, LA
NEW PINE CREEK R.F.P.D., OR
NEWBERG R.F.P.D., OR
NEWBERRY ESTATES SPECIAL ROAD DISTRICT, OR
NEWPORT R.F.P.D., OR
NEWT YOUNG DITCH DISTRICT IMPROVEMENT
COMPANY, OR
NORTH ALBANY R.F.P.D., OR
NORTH BAY R.F.P.D. #9, OR
NORTH CLACKAMAS PARKS & RECREATION
DISTRICT, OR
NORTH COUNTY RECREATION DISTRICT, OR
NORTH DOUGLAS COUNTY FIRE & EMS, OR
NORTH DOUGLAS PARK & RECREATION DISTRICT,
OR
NORTH GILLIAM COUNTY HEALTH DISTRICT, OR
NORTH GILLIAM COUNTY R.F.P.D., OR
NORTH LAKE HEALTH DISTRICT, OR
NORTH LEBANON WATER CONTROL DISTRICT, OR
NORTH LINCOLN FIRE & RESCUE DISTRICT #1, OR
NORTH LINCOLN HEALTH DISTRICT, OR
NORTH MORROW VECTOR CONTROL DISTRICT, OR
NORTH SHERMAN COUNTY R.F.P.D, OR
NORTH UNIT IRRIGATION DISTRICT, OR
NORTHEAST OREGON HOUSING AUTHORITY, OR
NORTHEAST WHEELER COUNTY HEALTH DISTRICT,
OR
NORTHERN WASCO COUNTY P.U.D., OR
NORTHERN WASCO COUNTY PARK & RECREATION
DISTRICT, OR
NYE DITCH USERS DISTRICT IMPROVEMENT, OR
NYSSA ROAD ASSESSMENT DISTRICT #2, OR
NYSSA RURAL FIRE DISTRICT, OR
NYSSA-ARCADIA DRAINAGE DISTRICT, OR
OAK LODGE WATER SERVICES, OR
OAKLAND R.F.P.D., OR
OAKVILLE COMMUNITY CENTER, OR
OCEANSIDE WATER DISTRICT, OR
OCHOCO IRRIGATION DISTRICT, OR
OCHOCO WEST WATER AND SANITARY
AUTHORITY, OR
ODELL SANITARY DISTRICT, OR
OLD OWYHEE DITCH IMPROVEMENT DISTRICT, OR
OLNEY-WALLUSKI FIRE & RESCUE DISTRICT, OR
ONTARIO LIBRARY DISTRICT, OR
ONTARIO R.F.P.D., OR
OPHIR R.F.P.D., OR
OREGON COAST COMMUNITY ACTION
OREGON HOUSING AND COMMUNITY SERVICES
OREGON INTERNATIONAL PORT OF COOS BAY, OR
OREGON LEGISLATIVE ADMINISTRATION
OREGON OUTBACK R.F.P.D., OR
OREGON POINT, OR
OREGON TRAIL LIBRARY DISTRICT, OR
OTTER ROCK WATER DISTRICT, OR
OWW UNIT #2 SANITARY DISTRICT, OR
OWYHEE CEMETERY MAINTENANCE DISTRICT, OR
OWYHEE IRRIGATION DISTRICT, OR
PACIFIC CITY JOINT WATER-SANITARY
AUTHORITY, OR
PACIFIC COMMUNITIES HEALTH DISTRICT, OR
PACIFIC RIVIERA #3 SPECIAL ROAD DISTRICT, OR
PALATINE HILL WATER DISTRICT, OR
PALMER CREEK WATER DISTRICT IMPROVEMENT
COMPANY, OR
PANORAMIC ACCESS SPECIAL ROAD DISTRICT, OR
PANTHER CREEK ROAD DISTRICT, OR
PANTHER CREEK WATER DISTRICT, OR
PARKDALE R.F.P.D., OR
PARKDALE SANITARY DISTRICT, OR
PENINSULA DRAINAGE DISTRICT #1, OR
PENINSULA DRAINAGE DISTRICT #2, OR
PHILOMATH FIRE AND RESCUE, OR
PILOT ROCK CEMETERY MAINTENANCE DISTRICT
#5, OR
PILOT ROCK PARK & RECREATION DISTRICT, OR
PILOT ROCK R.F.P.D., OR
PINE EAGLE HEALTH DISTRICT, OR
PINE FLAT DISTRICT IMPROVEMENT COMPANY, OR
PINE GROVE IRRIGATION DISTRICT, OR
PINE GROVE WATER DISTRICT-KLAMATH FALLS,
OR
PINE GROVE WATER DISTRICT-MAUPIN, OR
PINE VALLEY CEMETERY DISTRICT, OR
PINE VALLEY R.F.P.D., OR
PINEWOOD COUNTRY ESTATES SPECIAL ROAD
DISTRICT, OR
PIONEER DISTRICT IMPROVEMENT COMPANY, OR
PISTOL RIVER CEMETERY MAINTENANCE
DISTRICT, OR
PISTOL RIVER FIRE DISTRICT, OR
PLEASANT HILL R.F.P.D., OR
PLEASANT HOME WATER DISTRICT, OR
POCAHONTAS MINING AND IRRIGATION DISTRICT,
OR
POE VALLEY IMPROVEMENT DISTRICT, OR
POE VALLEY PARK & RECREATION DISTRICT, OR
POE VALLEY VECTOR CONTROL DISTRICT, OR
POLK COUNTY FIRE DISTRICT #1, OR
POLK S.W.C.D., OR
POMPADOUR WATER IMPROVEMENT DISTRICT, OR
PONDEROSA PINES EAST SPECIAL ROAD DISTRICT,
OR
PORT OF ALSEA, OR
PORT OF ARLINGTON, OR
PORT OF ASTORIA, OR
PORT OF BANDON, OR
PORT OF BRANDON, OR
PORT OF BROOKINGS HARBOR, OR
PORT OF CASCADE LOCKS, OR
PORT OF COQUILLE RIVER, OR
PORT OF GARIBALDI, OR
PORT OF GOLD BEACH, OR
PORT OF HOOD RIVER, OR
PORT OF MORGAN CITY, LA
PORT OF MORROW, OR
PORT OF NEHALEM, OR
PORT OF NEWPORT, OR
PORT OF PORT ORFORD, OR
PORT OF PORTLAND, OR
PORT OF SIUSLAW, OR
PORT OF ST. HELENS, OR
PORT OF THE DALLES, OR
PORT OF TILLAMOOK BAY, OR
PORT OF TOLEDO, OR
PORT OF UMATILLA, OR
PORT OF UMPQUA, OR
PORT ORFORD CEMETERY MAINTENANCE
DISTRICT, OR
PORT ORFORD PUBLIC LIBRARY DISTRICT, OR
PORT ORFORD R.F.P.D., OR
PORTLAND DEVELOPMENT COMMISSION, OR
PORTLAND FIRE AND RESCUE
PORTLAND HOUSING CENTER, OR
POWDER R.F.P.D., OR
POWDER RIVER R.F.P.D., OR
POWDER VALLEY WATER CONTROL DISTRICT, OR
POWERS HEALTH DISTRICT, OR
PRAIRIE CEMETERY MAINTENANCE DISTRICT, OR
PRINEVILLE LAKE ACRES SPECIAL ROAD DISTRICT
#1, OR
PROSPECT R.F.P.D., OR
QUAIL VALLEY PARK IMPROVEMENT DISTRICT, OR
QUEENER IRRIGATION IMPROVEMENT DISTRICT,
OR
RAINBOW WATER DISTRICT, OR
RAINIER CEMETERY DISTRICT, OR
RAINIER DRAINAGE IMPROVEMENT COMPANY, OR
RALEIGH WATER DISTRICT, OR
REDMOND AREA PARK & RECREATION DISTRICT,
OR
REDMOND FIRE AND RESCUE, OR
RIDDLE FIRE PROTECTION DISTRICT, OR
RIDGEWOOD DISTRICT IMPROVEMENT COMPANY,
OR
RIDGEWOOD ROAD DISTRICT, OR
RIETH SANITARY DISTRICT, OR
RIETH WATER DISTRICT, OR
RIMROCK WEST IMPROVEMENT DISTRICT, OR
RINK CREEK WATER DISTRICT, OR
RIVER BEND ESTATES SPECIAL ROAD DISTRICT, OR
RIVER FOREST ACRES SPECIAL ROAD DISTRICT, OR
RIVER MEADOWS IMPROVEMENT DISTRICT, OR
RIVER PINES ESTATES SPECIAL ROAD DISTRICT, OR
RIVER ROAD PARK & RECREATION DISTRICT, OR
RIVER ROAD WATER DISTRICT, OR
RIVERBEND RIVERBANK WATER IMPROVEMENT
DISTRICT, OR
RIVERDALE R.F.P.D. 11-JT, OR
RIVERGROVE WATER DISTRICT, OR
RIVERSIDE MISSION WATER CONTROL DISTRICT,
OR
RIVERSIDE R.F.P.D. #7-406, OR
RIVERSIDE WATER DISTRICT, OR
ROBERTS CREEK WATER DISTRICT, OR
ROCK CREEK DISTRICT IMPROVEMENT, OR
ROCK CREEK WATER DISTRICT, OR
ROCKWOOD WATER P.U.D., OR
ROCKY POINT FIRE & EMS, OR
ROGUE RIVER R.F.P.D., OR
ROGUE RIVER VALLEY IRRIGATION DISTRICT, OR
ROGUE VALLEY SEWER SERVICES, OR
ROGUE VALLEY SEWER, OR
ROGUE VALLEY TRANSPORTATION DISTRICT, OR
ROSEBURG URBAN SANITARY AUTHORITY, OR
ROSEWOOD ESTATES ROAD DISTRICT, OR
ROW RIVER VALLEY WATER DISTRICT, OR
RURAL ROAD ASSESSMENT DISTRICT #3, OR
RURAL ROAD ASSESSMENT DISTRICT #4, OR
SAINT LANDRY PARISH TOURIST COMMISSION
SAINT MARY PARISH REC DISTRICT 2
SAINT MARY PARISH REC DISTRICT 3
SAINT TAMMANY FIRE DISTRICT 4, LA
SALEM AREA MASS TRANSIT DISTRICT, OR
SALEM MASS TRANSIT DISTRICT
SALEM SUBURBAN R.F.P.D., OR
SALISHAN SANITARY DISTRICT, OR
SALMON RIVER PARK SPECIAL ROAD DISTRICT, OR
SALMON RIVER PARK WATER IMPROVEMENT
DISTRICT, OR
SALMONBERRY TRAIL INTERGOVERNMENTAL
AGENCY, OR
SANDPIPER VILLAGE SPECIAL ROAD DISTRICT, OR
SANDY DRAINAGE IMPROVEMENT COMPANY, OR
SANDY R.F.P.D. #72, OR
SANTA CLARA R.F.P.D., OR
SANTA CLARA WATER DISTRICT, OR
SANTIAM WATER CONTROL DISTRICT, OR
SAUVIE ISLAND DRAINAGE IMPROVEMENT
COMPANY, OR
SAUVIE ISLAND VOLUNTEER FIRE DISTRICT #30J,
OR
SCAPPOOSE DRAINAGE IMPROVEMENT COMPANY,
OR
SCAPPOOSE PUBLIC LIBRARY DISTRICT, OR
SCAPPOOSE R.F.P.D., OR
SCIO R.F.P.D., OR
SCOTTSBURG R.F.P.D., OR
SEAL ROCK R.F.P.D., OR
SEAL ROCK WATER DISTRICT, OR
SEWERAGE AND WATER BOARD OF NEW ORLEANS,
LA
SHANGRI-LA WATER DISTRICT, OR
SHASTA VIEW IRRIGATION DISTRICT, OR
SHELLEY ROAD CREST ACRES WATER DISTRICT,
OR
SHERIDAN FIRE DISTRICT, OR
SHERMAN COUNTY HEALTH DISTRICT, OR
SHERMAN COUNTY S.W.C.D., OR
SHORELINE SANITARY DISTRICT, OR
SILETZ KEYS SANITARY DISTRICT, OR
SILETZ R.F.P.D., OR
SILVER FALLS LIBRARY DISTRICT, OR
SILVER LAKE IRRIGATION DISTRICT, OR
SILVER LAKE R.F.P.D., OR
SILVER SANDS SPECIAL ROAD DISTRICT, OR
SILVERTON R.F.P.D. NO. 2, OR
SISTERS PARKS & RECREATION DISTRICT, OR
SISTERS-CAMP SHERMAN R.F.P.D., OR
SIUSLAW PUBLIC LIBRARY DISTRICT, OR
SIUSLAW S.W.C.D., OR
SIUSLAW VALLEY FIRE AND RESCUE, OR
SIXES R.F.P.D., OR
SKIPANON WATER CONTROL DISTRICT, OR
SKYLINE VIEW DISTRICT IMPROVEMENT
COMPANY, OR
SLEEPY HOLLOW WATER DISTRICT, OR
SMITH DITCH DISTRICT IMPROVEMENT COMPANY,
OR
SOUTH CLACKAMAS TRANSPORTATION DISTRICT,
OR
SOUTH COUNTY HEALTH DISTRICT, OR
SOUTH FORK WATER BOARD, OR
SOUTH GILLIAM COUNTY CEMETERY DISTRICT, OR
SOUTH GILLIAM COUNTY HEALTH DISTRICT, OR
SOUTH GILLIAM COUNTY R.F.P.D. VI-301, OR
SOUTH LAFOURCHE LEVEE DISTRICT, LA
SOUTH LANE COUNTY FIRE & RESCUE, OR
SOUTH SANTIAM RIVER WATER CONTROL
DISTRICT, OR
SOUTH SHERMAN FIRE DISTRICT, OR
SOUTH SUBURBAN SANITARY DISTRICT, OR
SOUTH WASCO PARK & RECREATION DISTRICT, OR
SOUTHERN COOS HEALTH DISTRICT, OR
SOUTHERN CURRY CEMETERY MAINTENANCE
DISTRICT, OR
SOUTHVIEW IMPROVEMENT DISTRICT, OR
SOUTHWEST LINCOLN COUNTY WATER DISTRICT,
OR
SOUTHWESTERN POLK COUNTY R.F.P.D., OR
SOUTHWOOD PARK WATER DISTRICT, OR
SPECIAL ROAD DISTRICT #1, OR
SPECIAL ROAD DISTRICT #8, OR
SPRING RIVER SPECIAL ROAD DISTRICT, OR
SPRINGFIELD UTILITY BOARD, OR
ST. PAUL R.F.P.D., OR
STANFIELD CEMETERY DISTRICT #6, OR
STANFIELD IRRIGATION DISTRICT, OR
STARR CREEK ROAD DISTRICT, OR
STARWOOD SANITARY DISTRICT, OR
STAYTON FIRE DISTRICT, OR
SUBLIMITY FIRE DISTRICT, OR
SUBURBAN EAST SALEM WATER DISTRICT, OR
SUBURBAN LIGHTING DISTRICT, OR
SUCCOR CREEK DISTRICT IMPROVEMENT
COMPANY, OR
SUMMER LAKE IRRIGATION DISTRICT, OR
SUMMERVILLE CEMETERY MAINTENANCE
DISTRICT, OR
SUMNER R.F.P.D., OR
SUN MOUNTAIN SPECIAL ROAD DISTRICT, OR
SUNDOWN SANITATION DISTRICT, OR
SUNFOREST ESTATES SPECIAL ROAD DISTRICT, OR
SUNNYSIDE IRRIGATION DISTRICT, OR
SUNRISE WATER AUTHORITY, OR
SUNRIVER SERVICE DISTRICT, OR
SUNSET EMPIRE PARK & RECREATION DISTRICT,
OR
SUNSET EMPIRE TRANSPORTATION DISTRICT, OR
SURFLAND ROAD DISTRICT, OR
SUTHERLIN VALLEY RECREATION DISTRICT, OR
SUTHERLIN WATER CONTROL DISTRICT, OR
SWALLEY IRRIGATION DISTRICT, OR
SWEET HOME CEMETERY MAINTENANCE DISTRICT,
OR
SWEET HOME FIRE & AMBULANCE DISTRICT, OR
SWISSHOME-DEADWOOD R.F.P.D., OR
TABLE ROCK DISTRICT IMPROVEMENT COMPANY,
OR
TALENT IRRIGATION DISTRICT, OR
TANGENT R.F.P.D., OR
TENMILE R.F.P.D., OR
TERREBONNE DOMESTIC WATER DISTRICT, OR
THE DALLES IRRIGATION DISTRICT, OR
THOMAS CREEK-WESTSIDE R.F.P.D., OR
THREE RIVERS RANCH ROAD DISTRICT, OR
THREE SISTERS IRRIGATION DISTRICT, OR
TIGARD TUALATIN AQUATIC DISTRICT, OR
TIGARD WATER DISTRICT, OR
TILLAMOOK BAY FLOOD IMPROVEMENT DISTRICT,
OR
TILLAMOOK COUNTY EMERGENCY
COMMUNICATIONS DISTRICT, OR
TILLAMOOK COUNTY S.W.C.D., OR
TILLAMOOK COUNTY TRANSPORTATION DISTRICT,
OR
TILLAMOOK FIRE DISTRICT, OR
TILLAMOOK P.U.D., OR
TILLER R.F.P.D., OR
TOBIN DITCH DISTRICT IMPROVEMENT COMPANY,
OR
TOLEDO R.F.P.D., OR
TONE WATER DISTRICT, OR
TOOLEY WATER DISTRICT, OR
TRASK DRAINAGE DISTRICT, OR
TRI CITY R.F.P.D. #4, OR
TRI-CITY WATER & SANITARY AUTHORITY, OR
TRI-COUNTY METROPOLITAN TRANSPORTATION
DISTRICT OF OREGON
TRIMET, OR
TUALATIN HILLS PARK & RECREATION DISTRICT
TUALATIN HILLS PARK & RECREATION DISTRICT,
OR
TUALATIN S.W.C.D., OR
TUALATIN VALLEY FIRE & RESCUE
TUALATIN VALLEY FIRE & RESCUE, OR
TUALATIN VALLEY IRRIGATION DISTRICT, OR
TUALATIN VALLEY WATER DISTRICT
TUALATIN VALLEY WATER DISTRICT, OR
TUMALO IRRIGATION DISTRICT, OR
TURNER FIRE DISTRICT, OR
TWIN ROCKS SANITARY DISTRICT, OR
TWO RIVERS NORTH SPECIAL ROAD DISTRICT, OR
TWO RIVERS S.W.C.D., OR
TWO RIVERS SPECIAL ROAD DISTRICT, OR
TYGH VALLEY R.F.P.D., OR
TYGH VALLEY WATER DISTRICT, OR
UMATILLA COUNTY FIRE DISTRICT #1, OR
UMATILLA COUNTY S.W.C.D., OR
UMATILLA COUNTY SPECIAL LIBRARY DISTRICT,
OR
UMATILLA HOSPITAL DISTRICT, OR
UMATILLA R.F.P.D. #7-405, OR
UMATILLA-MORROW RADIO AND DATA DISTRICT,
OR
UMPQUA S.W.C.D., OR
UNION CEMETERY MAINTENANCE DISTRICT, OR
UNION COUNTY SOLID WASTE DISPOSAL DISTRICT,
OR
UNION COUNTY VECTOR CONTROL DISTRICT, OR
UNION GAP SANITARY DISTRICT, OR
UNION GAP WATER DISTRICT, OR
UNION HEALTH DISTRICT, OR
UNION R.F.P.D., OR
UNION S.W.C.D., OR
UNITY COMMUNITY PARK & RECREATION
DISTRICT, OR
UPPER CLEVELAND RAPIDS ROAD DISTRICT, OR
UPPER MCKENZIE R.F.P.D., OR
UPPER WILLAMETTE S.W.C.D., OR
VALE OREGON IRRIGATION DISTRICT, OR
VALE RURAL FIRE PROTECTION DISTRICT, OR
VALLEY ACRES SPECIAL ROAD DISTRICT, OR
VALLEY VIEW CEMETERY MAINTENANCE
DISTRICT, OR
VALLEY VIEW WATER DISTRICT, OR
VANDEVERT ACRES SPECIAL ROAD DISTRICT, OR
VERNONIA R.F.P.D., OR
VINEYARD MOUNTAIN PARK & RECREATION
DISTRICT, OR
VINEYARD MOUNTAIN SPECIAL ROAD DISTRICT,
OR
WALLA WALLA RIVER IRRIGATION DISTRICT, OR
WALLOWA COUNTY HEALTH CARE DISTRICT, OR
WALLOWA LAKE COUNTY SERVICE DISTRICT, OR
WALLOWA LAKE IRRIGATION DISTRICT, OR
WALLOWA LAKE R.F.P.D., OR
WALLOWA S.W.C.D., OR
WALLOWA VALLEY IMPROVEMENT DISTRICT #1,
OR
WAMIC R.F.P.D., OR
WAMIC WATER & SANITARY AUTHORITY, OR
WARMSPRINGS IRRIGATION DISTRICT, OR
WASCO COUNTY S.W.C.D., OR
WATER ENVIRONMENT SERVICES, OR
WATER WONDERLAND IMPROVEMENT DISTRICT,
OR
WATERBURY & ALLEN DITCH IMPROVEMENT
DISTRICT, OR
WATSECO-BARVIEW WATER DISTRICT, OR
WAUNA WATER DISTRICT, OR
WEDDERBURN SANITARY DISTRICT, OR
WEST EAGLE VALLEY WATER CONTROL DISTRICT,
OR
WEST EXTENSION IRRIGATION DISTRICT, OR
WEST LABISH DRAINAGE & WATER CONTROL
IMPROVEMENT DISTRICT, OR
WEST MULTNOMAH S.W.C.D., OR
WEST SIDE R.F.P.D., OR
WEST SLOPE WATER DISTRICT, OR
WEST UMATILLA MOSQUITO CONTROL DISTRICT,
OR
WEST VALLEY FIRE DISTRICT, OR
WESTERN HEIGHTS SPECIAL ROAD DISTRICT, OR
WESTERN LANE AMBULANCE DISTRICT, OR
WESTLAND IRRIGATION DISTRICT, OR
WESTON ATHENA MEMORIAL HALL PARK &
RECREATION DISTRICT, OR
WESTON CEMETERY DISTRICT #2, OR
WESTPORT FIRE AND RESCUE, OR
WESTRIDGE WATER SUPPLY CORPORATION, OR
WESTWOOD HILLS ROAD DISTRICT, OR
WESTWOOD VILLAGE ROAD DISTRICT, OR
WHEELER S.W.C.D., OR
WHITE RIVER HEALTH DISTRICT, OR
WIARD MEMORIAL PARK DISTRICT, OR
WICKIUP WATER DISTRICT, OR
WILLAKENZIE R.F.P.D., OR
WILLAMALANE PARK & RECREATION DISTRICT, OR
WILLAMALANE PARK AND RECREATION DISTRICT
WILLAMETTE HUMANE SOCIETY
WILLAMETTE RIVER WATER COALITION, OR
WILLIAMS R.F.P.D., OR
WILLOW CREEK PARK DISTRICT, OR
WILLOW DALE WATER DISTRICT, OR
WILSON RIVER WATER DISTRICT, OR
WINCHESTER BAY R.F.P.D., OR
WINCHESTER BAY SANITARY DISTRICT, OR
WINCHUCK R.F.P.D., OR
WINSTON-DILLARD R.F.P.D., OR
WINSTON-DILLARD WATER DISTRICT, OR
WOLF CREEK R.F.P.D., OR
WOOD RIVER DISTRICT IMPROVEMENT COMPANY,
OR
WOODBURN R.F.P.D. NO. 6, OR
WOODLAND PARK SPECIAL ROAD DISTRICT, OR
WOODS ROAD DISTRICT, OR
WRIGHT CREEK ROAD WATER IMPROVEMENT
DISTRICT, OR
WY'EAST FIRE DISTRICT, OR
YACHATS R.F.P.D., OR
YAMHILL COUNTY TRANSIT AREA, OR
YAMHILL FIRE PROTECTION DISTRICT, OR
YAMHILL SWCD, OR
YONCALLA PARK & RECREATION DISTRICT, OR
YOUNGS RIVER-LEWIS & CLARK WATER DISTRICT,
OR
ZUMWALT R.F.P.D., OR
K-12 INCLUDING BUT NOT LIMITED TO:
ACADIA PARISH SCHOOL BOARD
BEAVERTON SCHOOL DISTRICT
BEND-LA PINE SCHOOL DISTRICT
BOGALUSA HIGH SCHOOL, LA
BOSSIER PARISH SCHOOL BOARD
BROOKING HARBOR SCHOOL DISTRICT
CADDO PARISH SCHOOL DISTRICT
CALCASIEU PARISH SCHOOL DISTRICT
CANBY SCHOOL DISTRICT
CANYONVILLE CHRISTIAN ACADEMY
CASCADE SCHOOL DISTRICT
CASCADES ACADEMY OF CENTRAL OREGON
CENTENNIAL SCHOOL DISTRICT
CENTRAL CATHOLIC HIGH SCHOOL
CENTRAL POINT SCHOOL DISTRICT NO.6
CENTRAL SCHOOL DISTRICT 13J
COOS BAY SCHOOL DISTRICT NO.9
CORVALLIS SCHOOL DISTRICT 509J
COUNTY OF YAMHILL SCHOOL DISTRICT 29
CULVER SCHOOL DISTRICT
DALLAS SCHOOL DISTRICT NO.2
DAVID DOUGLAS SCHOOL DISTRICT
DAYTON SCHOOL DISTRICT NO.8
DE LA SALLE N CATHOLIC HS
DESCHUTES COUNTY SCHOOL DISTRICT NO.6
DOUGLAS EDUCATIONAL DISTRICT SERVICE
DUFUR SCHOOL DISTRICT NO.29
EAST BATON ROUGE PARISH SCHOOL DISTRICT
ESTACADA SCHOOL DISTRICT NO.10B
FOREST GROVE SCHOOL DISTRICT
GEORGE MIDDLE SCHOOL
GLADSTONE SCHOOL DISTRICT
GRANTS PASS SCHOOL DISTRICT 7
GREATER ALBANY PUBLIC SCHOOL DISTRICT
GRESHAM BARLOW JOINT SCHOOL DISTRICT
HEAD START OF LANE COUNTY
HIGH DESERT EDUCATION SERVICE DISTRICT
HILLSBORO SCHOOL DISTRICT
HOOD RIVER COUNTY SCHOOL DISTRICT
JACKSON CO SCHOOL DIST NO.9
JEFFERSON COUNTY SCHOOL DISTRICT 509-J
JEFFERSON PARISH SCHOOL DISTRICT
JEFFERSON SCHOOL DISTRICT
JUNCTION CITY SCHOOLS, OR
KLAMATH COUNTY SCHOOL DISTRICT
KLAMATH FALLS CITY SCHOOLS
LAFAYETTE PARISH SCHOOL DISTRICT
LAKE OSWEGO SCHOOL DISTRICT 7J
LANE COUNTY SCHOOL DISTRICT 4J
LINCOLN COUNTY SCHOOL DISTRICT
LINN CO. SCHOOL DIST. 95C
LIVINGSTON PARISH SCHOOL DISTRICT
LOST RIVER JR/SR HIGH SCHOOL
LOWELL SCHOOL DISTRICT NO.71
MARION COUNTY SCHOOL DISTRICT
MARION COUNTY SCHOOL DISTRICT 103
MARIST HIGH SCHOOL, OR
MCMINNVILLE SCHOOL DISTRICT NOAO
MEDFORD SCHOOL DISTRICT 549C
MITCH CHARTER SCHOOL
MONROE SCHOOL DISTRICT NO.1J
MORROW COUNTY SCHOOL DIST, OR
MULTNOMAH EDUCATION SERVICE DISTRICT
MULTISENSORY LEARNING ACADEMY
MYRTLE PINT SCHOOL DISTRICT 41
NEAH-KAH-NIE DISTRICT NO.56
NEWBERG PUBLIC SCHOOLS
NESTUCCA VALLEY SCHOOL DISTRICT NO.101
NOBEL LEARNING COMMUNITIES
NORTH BEND SCHOOL DISTRICT 13
NORTH CLACKAMAS SCHOOL DISTRICT
NORTH DOUGLAS SCHOOL DISTRICT
NORTH WASCO CITY SCHOOL DISTRICT 21
NORTHWEST REGIONAL EDUCATION SERVICE
DISTRICT
ONTARIO MIDDLE SCHOOL
OREGON TRAIL SCHOOL DISTRICT NOA6
ORLEANS PARISH SCHOOL DISTRICT
PHOENIX-TALENT SCHOOL DISTRICT NOA
PLEASANT HILL SCHOOL DISTRICT
PORTLAND JEWISH ACADEMY
PORTLAND PUBLIC SCHOOLS
RAPIDES PARISH SCHOOL DISTRICT
REDMOND SCHOOL DISTRICT
REYNOLDS SCHOOL DISTRICT
ROGUE RIVER SCHOOL DISTRICT
ROSEBURG PUBLIC SCHOOLS
SCAPPOOSE SCHOOL DISTRICT 1J
SAINT TAMMANY PARISH SCHOOL BOARD, LA
SEASIDE SCHOOL DISTRICT 10
SHERWOOD SCHOOL DISTRICT 88J
SILVER FALLS SCHOOL DISTRICT 4J
SOUTH LANE SCHOOL DISTRICT 45J3
SOUTHERN OREGON EDUCATION SERVICE
DISTRICT
SPRINGFIELD PUBLIC SCHOOLS
SUTHERLIN SCHOOL DISTRICT
SWEET HOME SCHOOL DISTRICT NO.55
TERREBONNE PARISH SCHOOL DISTRICT
THE CATLIN GABEL SCHOOL
TIGARD-TUALATIN SCHOOL DISTRICT
UMATILLA MORROW ESD
WEST LINN WILSONVILLE SCHOOL DISTRICT
WILLAMETTE EDUCATION SERVICE DISTRICT
WOODBURN SCHOOL DISTRICT
YONCALLA SCHOOL DISTRICT
ACADEMY FOR MATH ENGINEERING & SCIENCE
(AMES), UT
ALIANZA ACADEMY, UT
ALPINE DISTRICT, UT
AMERICAN LEADERSHIP ACADEMY, UT
AMERICAN PREPARATORY ACADEMY, UT
BAER CANYON HIGH SCHOOL FOR SPORTS &
MEDICAL SCIENCES, UT
BEAR RIVER CHARTER SCHOOL, UT
BEAVER SCHOOL DISTRICT, UT
BEEHIVE SCIENCE & TECHNOLOGY ACADEMY
(BSTA) , UT
BOX ELDER SCHOOL DISTRICT, UT
CBA CENTER, UT
CACHE SCHOOL DISTRICT, UT
CANYON RIM ACADEMY, UT
CANYONS DISTRICT, UT
CARBON SCHOOL DISTRICT, UT
CHANNING HALL, UT
CHARTER SCHOOL LEWIS ACADEMY, UT
CITY ACADEMY, UT
DAGGETT SCHOOL DISTRICT, UT
DAVINCI ACADEMY, UT
DAVIS DISTRICT, UT
DUAL IMMERSION ACADEMY, UT
DUCHESNE SCHOOL DISTRICT, UT
EARLY LIGHT ACADEMY AT DAYBREAK, UT
EAST HOLLYWOOD HIGH, UT
EDITH BOWEN LABORATORY SCHOOL, UT
EMERSON ALCOTT ACADEMY, UT
EMERY SCHOOL DISTRICT, UT
ENTHEOS ACADEMY, UT
EXCELSIOR ACADEMY, UT
FAST FORWARD HIGH, UT
FREEDOM ACADEMY, UT
GARFIELD SCHOOL DISTRICT, UT
GATEWAY PREPARATORY ACADEMY, UT
GEORGE WASHINGTON ACADEMY, UT
GOOD FOUNDATION ACADEMY, UT
GRAND SCHOOL DISTRICT, UT
GRANITE DISTRICT, UT
GUADALUPE SCHOOL, UT
HAWTHORN ACADEMY, UT
INTECH COLLEGIATE HIGH SCHOOL, UT
IRON SCHOOL DISTRICT, UT
ITINERIS EARLY COLLEGE HIGH, UT
JOHN HANCOCK CHARTER SCHOOL, UT
JORDAN DISTRICT, UT
JUAB SCHOOL DISTRICT, UT
KANE SCHOOL DISTRICT, UT
KARL G MAESER PREPARATORY ACADEMY, UT
LAKEVIEW ACADEMY, UT
LEGACY PREPARATORY ACADEMY, UT
LIBERTY ACADEMY, UT
LINCOLN ACADEMY, UT
LOGAN SCHOOL DISTRICT, UT
MARIA MONTESSORI ACADEMY, UT
MERIT COLLEGE PREPARATORY ACADEMY, UT
MILLARD SCHOOL DISTRICT, UT
MOAB CHARTER SCHOOL, UT
MONTICELLO ACADEMY, UT
MORGAN SCHOOL DISTRICT, UT
MOUNTAINVILLE ACADEMY, UT
MURRAY SCHOOL DISTRICT, UT
NAVIGATOR POINTE ACADEMY, UT
NEBO SCHOOL DISTRICT, UT
NO UT ACAD FOR MATH ENGINEERING & SCIENCE
(NUAMES), UT
NOAH WEBSTER ACADEMY, UT
NORTH DAVIS PREPARATORY ACADEMY, UT
NORTH SANPETE SCHOOL DISTRICT, UT
NORTH STAR ACADEMY, UT
NORTH SUMMIT SCHOOL DISTRICT, UT
ODYSSEY CHARTER SCHOOL, UT
OGDEN PREPARATORY ACADEMY, UT
OGDEN SCHOOL DISTRICT, UT
OPEN CLASSROOM, UT
OPEN HIGH SCHOOL OF UTAH, UT
OQUIRRH MOUNTAIN CHARTER SCHOOL, UT
PARADIGM HIGH SCHOOL, UT
PARK CITY SCHOOL DISTRICT, UT
PINNACLE CANYON ACADEMY, UT
PIUTE SCHOOL DISTRICT, UT
PROVIDENCE HALL, UT
PROVO SCHOOL DISTRICT, UT
QUAIL RUN PRIMARY SCHOOL, UT
QUEST ACADEMY, UT
RANCHES ACADEMY, UT
REAGAN ACADEMY, UT
RENAISSANCE ACADEMY, UT
RICH SCHOOL DISTRICT, UT
ROCKWELL CHARTER HIGH SCHOOL, UT
SALT LAKE ARTS ACADEMY, UT
SALT LAKE CENTER FOR SCIENCE EDUCATION, UT
SALT LAKE SCHOOL DISTRICT, UT
SALT LAKE SCHOOL FOR THE PERFORMING ARTS,
UT
SAN JUAN SCHOOL DISTRICT, UT
SEVIER SCHOOL DISTRICT, UT
SOLDIER HOLLOW CHARTER SCHOOL, UT
SOUTH SANPETE SCHOOL DISTRICT, UT
SOUTH SUMMIT SCHOOL DISTRICT, UT
SPECTRUM ACADEMY, UT
SUCCESS ACADEMY, UT
SUCCESS SCHOOL, UT
SUMMIT ACADEMY, UT
SUMMIT ACADEMY HIGH SCHOOL, UT
SYRACUSE ARTS ACADEMY, UT
THOMAS EDISON - NORTH, UT
TIMPANOGOS ACADEMY, UT
TINTIC SCHOOL DISTRICT, UT
TOOELE SCHOOL DISTRICT, UT
TUACAHN HIGH SCHOOL FOR THE PERFORMING
ARTS, UT
UINTAH RIVER HIGH, UT
UINTAH SCHOOL DISTRICT, UT
UTAH CONNECTIONS ACADEMY, UT
UTAH COUNTY ACADEMY OF SCIENCE, UT
UTAH ELECTRONIC HIGH SCHOOL, UT
UTAH SCHOOLS FOR DEAF & BLIND, UT
UTAH STATE OFFICE OF EDUCATION, UT
UTAH VIRTUAL ACADEMY, UT
VENTURE ACADEMY, UT
VISTA AT ENTRADA SCHOOL OF PERFORMING
ARTS AND TECHNOLOGY, UT
WALDEN SCHOOL OF LIBERAL ARTS, UT
WASATCH PEAK ACADEMY, UT
WASATCH SCHOOL DISTRICT, UT
WASHINGTON SCHOOL DISTRICT, UT
WAYNE SCHOOL DISTRICT, UT
WEBER SCHOOL DISTRICT, UT
WEILENMANN SCHOOL OF DISCOVERY, UT
HIGHER EDUCATION
ARGOSY UNIVERSITY
BATON ROUGE COMMUNITY COLLEGE, LA
BIRTHINGWAY COLLEGE OF MIDWIFERY
BLUE MOUNTAIN COMMUNITY COLLEGE
BRIGHAM YOUNG UNIVERSITY - HAWAII
CENTRAL OREGON COMMUNITY COLLEGE
CENTENARY COLLEGE OF LOUISIANA
CHEMEKETA COMMUNITY COLLEGE
CLACKAMAS COMMUNITY COLLEGE
COLLEGE OF THE MARSHALL ISLANDS
COLUMBIA GORGE COMMUNITY COLLEGE
CONCORDIA UNIVERSITY
GEORGE FOX UNIVERSITY
KLAMATH COMMUNITY COLLEGE DISTRICT
LANE COMMUNITY COLLEGE
LEWIS AND CLARK COLLEGE
LINFIELD COLLEGE
LINN-BENTON COMMUNITY COLLEGE
LOUISIANA COLLEGE, LA
LOUISIANA STATE UNIVERSITY
LOUISIANA STATE UNIVERSITY HEALTH SERVICES
MARYLHURST UNIVERSITY
MT. HOOD COMMUNITY COLLEGE
MULTNOMAH BIBLE COLLEGE
NATIONAL COLLEGE OF NATURAL MEDICINE
NORTHWEST CHRISTIAN COLLEGE
OREGON HEALTH AND SCIENCE UNIVERSITY
OREGON INSTITUTE OF TECHNOLOGY
OREGON STATE UNIVERSITY
OREGON UNIVERSITY SYSTEM
PACIFIC UNIVERSITY
PIONEER PACIFIC COLLEGE
PORTLAND COMMUNITY COLLEGE
PORTLAND STATE UNIVERSITY
REED COLLEGE
RESEARCH CORPORATION OF THE UNIVERSITY OF
HAWAII
ROGUE COMMUNITY COLLEGE
SOUTHEASTERN LOUISIANA UNIVERSITY
SOUTHERN OREGON UNIVERSITY (OREGON
UNIVERSITY SYSTEM)
SOUTHWESTERN OREGON COMMUNITY COLLEGE
TULANE UNIVERSITY
TILLAMOOK BAY COMMUNITY COLLEGE
UMPQUA COMMUNITY COLLEGE
UNIVERSITY OF HAWAII BOARD OF REGENTS
UNIVERSITY OF HAWAII-HONOLULU COMMUNITY
COLLEGE
UNIVERSITY OF OREGON-GRADUATE SCHOOL
UNIVERSITY OF PORTLAND
UNIVERSITY OF NEW ORLEANS
WESTERN OREGON UNIVERSITY
WESTERN STATES CHIROPRACTIC COLLEGE
WILLAMETTE UNIVERSITY
XAVIER UNIVERSITY
UTAH SYSTEM OF HIGHER EDUCATION, UT
UNIVERSITY OF UTAH, UT
UTAH STATE UNIVERSITY, UT
WEBER STATE UNIVERSITY, UT
SOUTHERN UTAH UNIVERSITY, UT
SNOW COLLEGE, UT
DIXIE STATE COLLEGE, UT
COLLEGE OF EASTERN UTAH, UT
UTAH VALLEY UNIVERSITY, UT
SALT LAKE COMMUNITY COLLEGE, UT
UTAH COLLEGE OF APPLIED TECHNOLOGY, UT
STATE AGENCIES
ADMIN. SERVICES OFFICE
BOARD OF MEDICAL EXAMINERS
HAWAII CHILD SUPPORT ENFORCEMENT AGENCY
HAWAII DEPARTMENT OF TRANSPORTATION
HAWAII HEALTH SYSTEMS CORPORATION
OFFICE OF MEDICAL ASSISTANCE PROGRAMS
OFFICE OF THE STATE TREASURER
OREGON BOARD OF ARCHITECTS
OREGON CHILD DEVELOPMENT COALITION
OREGON DEPARTMENT OF EDUCATION
OREGON DEPARTMENT OF FORESTRY
OREGON DEPT OF TRANSPORTATION
OREGON DEPT. OF EDUCATION
OREGON LOTTERY
OREGON OFFICE OF ENERGY
OREGON STATE BOARD OF NURSING
OREGON STATE DEPT OF CORRECTIONS
OREGON STATE POLICE
OREGON TOURISM COMMISSION
OREGON TRAVEL INFORMATION COUNCIL
SANTIAM CANYON COMMUNICATION CENTER
SEIU LOCAL 503, OPEU
SOH- JUDICIARY CONTRACTS AND PURCH
STATE DEPARTMENT OF DEFENSE, STATE OF
HAWAII
STATE OF HAWAII
STATE OF HAWAII, DEPT. OF EDUCATION
STATE OF LOUISIANA
STATE OF LOUISIANA DEPT. OF EDUCATION
STATE OF LOUISIANA, 26TH JUDICIAL DISTRICT
ATTORNEY
STATE OF UTAH
Line Item Unit $ per Unit
1.00 Roof Management, Design Assistant and/or Professional Services
1.01 Full-time Quality Assurance monitoring DAY
1.02 Asbestos core testing and analysis (testing only, excludes labor for sampling and repair) EA
1.03 Analysis and evaluation (14” x 14” roof core) (Lab testing only, repairs charged at roof repair rates for appropriate system type) EA
1.04 Aerial Roof Survey - Roof Pictures & Drawings Including Geometries, Slope, Calculated Area and Perimeter Measurements EA
1.05 Aerial Wall Survey - Wall Pictures & Drawings Including Geometries, Calculated Area and Perimeter Measurements EA
1.06 Manufacturer Standing Seam Material Quantity Estimating EA
1.07 Nuclear Moisture Survey, Non destructive roof scan
1.07.01 Non destructive roof scan, up to 20 000 SF EA
1.07.02 Non destructive roof scan, over 20,000 SF SF
1.08 Infrared Moisture Scanning
1.08.01 Non destructive infrared roof scan, up to 20 000 SF EA
1.08.02 Non destructive infrared roof scan, over 20,000 SF SF
1.08.03 Aerial infrared roof scan at night TRIP
1.09 Infrared scanning equipment rental DAY
1.10 Roof investigation (visual roof survey)
1.10.01 Roof Investigation (Roof by Roof), per hour HOUR
1.10.02 Visual Roof Survey (Roof by Roof) up to 20,000 SF EA
1.10.03 Visual Roof Survey (Roof by Roof) over 20,000 SF SF
1.10.04 Visual Roof Survey (Single Campus - All Roof Sections) SF
1.10.05 Visual Roof Survey (Multiple Campuses City-/County-wide - All Roof Sections) SF
1.10.06 Visual Roof Survey (Multiple Campuses State-wide - All Roof Sections) SF
1.10.07 Roof core cut (roof by roof) EA
1.10.08 Roof core cut per roof section (all roof sections on campus(s)) EA
1.11 Comprehensive reporting
1.11.01 Comprehensive report for visual survey (Roof by Roof) EA
1.11.02 Comprehensive report for visual survey(All Roof Sections on Campus(es) EA
1.11.03 Comprehensive report for each roof section(s) surveyed (Item 1.07) or scanned (Item 1.08) EA
1.11.04 Comprehensive report enertered into on-line data base for dynamic reporting and tracking all roofing sections on Campus(s) EA
1.12 Manufacturer's Technical Representative Contractor Training Session at Job Start-Up DAILY
1.13 Wind Uplift Testing – Mobilize and provide wind uplift testing per Factory Mutual System Roof Design Manual FM 1-52 EA
1.14 Roof drawings to scale with all rooftop equipment and penetrations
1.14.01 Roof drawings (Roof by Roof) EA
1.14.02 Roof drawings (All Roof Sections on Campus(es) EA
1.15 Project Building Code Review EA
1.16 Additional and Occasional Services
1.16.01 Project Architect for Design Professional Services HOUR
1.16.02 Principle Architect for Design Professional Services HOUR
1.16.03 Project Engineer for Engineering Reviews HOUR
1.16.04 Principle Architect for Engineering Reviews HOUR
1.16.06 Roof Consultant HOUR
1.16.07 Full-Time Job Site Superintendent DAY
1.16.08 CAD Draftsman HOUR
1.17 Laboratory Analysis
1.17.01 Laboratory Fungal Analysis: Cultured Fungi Identification & Enumeration (Not including engineering time for sampling) EA
1.17.02 Laboratory Fungal Analysis: Total Fungi Spore Count (Not including engineering time for sampling) EA
1.17.03 Laboratory Mold Analysis: Viable Airborne Mold Analysis (Not including engineering time for sampling) EA
1.17.04 Laboratory Analysis: Viable Surface Swab or Bulk Substrate Analysis (Not including engineering time for sampling) EA
1.17.05 Laboratory Analysis: Non-Viable Surface Swab or Bulk Substrate Analysis (Not including engineering time for sampling) EA
1.17.06 Destructive Roof Sample Analysis:
Comprehensive laboratory testing of a core sample from an existing roof to include tensile/tear strength, scrim type, interply bitumen weight and roof composition; Repair the roof core area with similar materials. EA
1.18 Travel Expenses
1.18.01 Per Diem – Meals and Incidentals DAY
1.18.02 Lodging DAY
1.18.03 Mileage on Company / Personal Vehicle MILE
1.18.04 Airfare (Economy) JOB
1.18.05 Vehicle Rental DAY
1.19 Seamer Rental Charges DAY
1.20 Set-up Charges for Metal In-Shop Fabrication EA
1.21 Set-up On-Site Roll Forming EA
1.22 Roof Fastener Pull Tests (As Many as Required per Roof Section) EA
1.23 Wind Uplift Design Calculations EA
1.24 Roof Drainage Capacity Calculations EA
IFB #PW19 Roofing Supplies and Services, Waterproofing, and Related Products and Services Attachment C - Bid Form
1.25 Roof Edge Metal Calculations - ANSI/SPRI ES-1 Standards EA
1.26 Dew Point Calculations EA
1.27 Energy Payback Calculations EA
1.28 Project Life-Cycle Cost Calculation EA
1.29 Substantial Completion Walkthrough with Report and Punchlist
1.30 Final Walkthrough with Report EA
1.31 On-Site Quality Control Inspections with Report from Manufacturer's Rep - 3 Days per Week WEEK
1.32 "As-Built" Drawings Upon Project Completion EA
1.33 R.A. or P.E. Reviewed and Stamped Shop Drawings EA
1.34 R.A. or P.E. Reviewed and Stamped Specifications EA
1.35 Non-R.A./P.E. Reviewed Shop Drawings EA
1.36 Project Design Assistance - Hourly Rate for Consultations with Architect of Record EA
1.37 Project Design Assistance - Development of a recommended specification for a roofing or waterproofing project EA
1.38 Roof Asset Management Report with recommended options for future course of actions and associated budgets for capital expense and maintenance planning. EA
1.39 Five year capital expense and maintenance plan ( All roof section on for campus(es)) EA
1.40 Additional Professional Services
1.40.01 Option 1: Professional Services (Third party architectural design, engineering or consulting services quote on corporate letterhead)
Cost plus added to quote %
1.40.02 Option 2: R.S. Means or Gordian Group Catalog (Used when professional services line item pricing is not available)
Cost plus added to catalog pricing %
2.00 Tear-off & Dispose of Debris
2.01 SF
2.02 SF
2.03 SF
2.04 SF
2.05 SF
2.06 SF
2.07 SF
2.08 SF
2.09 SF
2.10 SF
2.11 SF
2.12 SF
2.13 SF
2.14 SF
2.15 SF
2.16 SF
2.17 SF
2.18 SF
2.19 SF
2.20 SF
2.21 SF
2.22 SF
2.23 SF
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Gravel Surfacing - Wood / Tectum Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Gravel Surfacing - Lightweight / Gyp Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Gravel Surfacing - Concrete Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Mineral Surfacing - Metal Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Mineral Surfacing - Wood / Tectum Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Mineral Surfacing - Lightweight / Gyp Deck
SYSTEM TYPE
Single-Ply W/ Insulation - Concrete Deck
SYSTEM TYPE
Ballasted Single-Ply W/ Insulation - Metal Deck
SYSTEM TYPE
Ballasted Single-Ply W/ Insulation - Wood / Tectum Deck
SYSTEM TYPE
Ballasted Single-Ply W/ Insulation - Lightweight / Gyp Deck
SYSTEM TYPE
Ballasted Single-Ply W/ Insulation - Concrete Deck
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Gravel Surfacing - Metal Deck
SYSTEM TYPE
BUR W/ Insulation and Mineral Surfacing - Wood / Tectum Deck
SYSTEM TYPE
BUR W/ Insulation and Mineral Surfacing - Lightweight / Gyp Deck
SYSTEM TYPE
BUR W/ Insulation and Mineral Surfacing - Concrete Deck
SYSTEM TYPE
Single-Ply W/ Insulation - Metal Deck
SYSTEM TYPE
Single-Ply W/ Insulation - Wood / Tectum Deck
SYSTEM TYPE
Single-Ply W/ Insulation - Lightweight / Gyp Deck
SYSTEM TYPE
BUR W/ Insulation and Gravel Surfacing - Metal Deck
SYSTEM TYPE
BUR W/ Insulation and Gravel Surfacing - Wood / Tectum Deck
SYSTEM TYPE
BUR W/ Insulation and Gravel Surfacing - Lightweight / Gyp Deck
SYSTEM TYPE
BUR W/ Insulation and Gravel Surfacing - Concrete Deck
SYSTEM TYPE
BUR W/ Insulation and Mineral Surfacing - Metal Deck
2.24 SF
2.25 SF
2.26 SF
2.27 SF
2.28 SF
2.29 SF
2.30 SF
2.31 SF
2.32 SF
2.33 SF
2.34 SF
2.35 SF
2.36 SF
2.37 SF
2.38 SF
2.39 SF
2.40 SF
2.41 SF
2.42 SF
2.43 SF
2.44 SF
2.45 SF
2.46 SF
2.47 SF
2.48 SF
2.49 SF
2.99 %
3.00 Removal & Replacement of Roof Deck
3.01 SF
3.02 SF
3.03 SF
3.04 SF
3.05 SF
3.06 SF
3.07 SF
DECK TYPE
Spot Concrete Deck Replacement (Multiple areas under 1 square)
DECK TYPE
Spot Lightweight Deck Replacement (Multiple areas under 1 square)
DECK TYPE
Spot Tectum Deck Replacement (Multiple areas under 1 square)
DECK TYPE
Large Areas of Metal Deck Replacement (Replacement areas averaging greater than 1 square)
SYSTEM TYPE
Coal Tar BUR with Gravel Surfacing to the Existing Insulation (Insulation to be Re-Used)
SYSTEM TYPE
Coal Tar BUR with Mineral Surfacing to the Existing Insulation (Insulation to be Re-Used)
MULTIPLIER - TEAR-OFF & DISPOSE OF DEBRIS
Each Additional Roof System
DECK TYPE
Spot Metal Deck Replacement (Multiple areas under 1 square)
DECK TYPE
Spot Wood Deck Replacement (Multiple areas under 1 square)
DECK TYPE
Spot Gypsum Deck Replacement (Multiple areas under 1 square)
SYSTEM TYPE
Polyurethane Foam (PUF) Roof (Average of 2" thick) W/ Underlying Insulation and UV-Resistant Coating - Concrete Deck
SYSTEM TYPE
Add of Each Additional Average Depth 1" of Polyurethane Foam (PUF) Roofing
SYSTEM TYPE
BUR w/ Gravel Surfacing to the Existing Insulation (Insulation to be Re-Used)
SYSTEM TYPE
BUR w/ Mineral Surfacing to the Existing Insulation (Insulation to be Re-Used)
SYSTEM TYPE
Single-Ply to the Existing Insulation (Insulation to be Re-Used
SYSTEM TYPE
Ballasted Single-Ply to the Existing Insulation (Insulation to be Re-Used
SYSTEM TYPE
Add to save good Concrete Tile Shingles for reuse
SYSTEM TYPE
Add to save good Slate Tile Shingles for reuse
SYSTEM TYPE
Add to save good Cedar / Wood Shake Shingles for reuse
SYSTEM TYPE
Polyurethane Foam (PUF) Roof (Average of 2" thick) W/ Underlying Insulation and UV-Resistant Coating - Metal Deck
SYSTEM TYPE
Polyurethane Foam (PUF) Roof (Average of 2" thick) W/ Underlying Insulation and UV-Resistant Coating - Wood / Tectum Deck
SYSTEM TYPE
Polyurethane Foam (PUF) Roof (Average of 2" thick) W/ Underlying Insulation and UV-Resistant Coating - Lightweight / Gyp Deck
SYSTEM TYPE
3-Tab Shingle Roof - Wood Deck
SYSTEM TYPE
Clay Tile Shingle Roof - Wood Deck
SYSTEM TYPE
Concrete Tile Shingle Roof - Wood Deck
SYSTEM TYPE
Slate Tile Shingle Roof - Wood Deck
SYSTEM TYPE
Cedar / Wood Shake Shingle Roof - Wood Deck
SYSTEM TYPE
Add to save good Clay Tile Shingles for reuse
SYSTEM TYPE
Coal Tar BUR W/ Insulation and Mineral Surfacing - Concrete Deck
SYSTEM TYPE
Metal Roofing System - Metal Deck
SYSTEM TYPE
Metal Roofing System - Wood / Tectum Deck
SYSTEM TYPE
Metal Roofing System - Lightweight / Gypsum Deck
SYSTEM TYPE
Metal Roofing System - Concrete Deck
SYSTEM TYPE
Dimensional/Architectural Shingle Roof - Wood Deck
3.08 SF
3.09 SF
3.10 SF
3.11 SF
3.12 SF
4.00 Insulation Recovery Board & Insulations Options
4.01 SF
4.02 SF
4.03 SF
4.04 SF
4.05 SF
4.06 SF
4.07 SF
4.08 SF
4.09 SF
4.10 SF
4.11 SF
4.12 SF
4.13 SF
4.14 SF
4.15 SF
4.16 SF
4.17 SF
4.18 SF
4.19 SF
4.20 SF
4.21 SF
ADDITIONAL INSULATION OPTION (OVER AN EXISTING ROOF)
Install 2.5" of Polyisocyanurate Insulation Over an Existing Roof. All Wet Insulation Must be Replaced Prior to Installation of New Course of Insulation
ADDITIONAL INSULATION OPTION (OVER AN EXISTING ROOF)
Add for Cutting New Insulation to Match the Profile of an Existing Metal Roof.
INSULATION SUBSTITUTION OPTION
Deduct for Providing an R-Value of greater than or equal to 10, but less than 15; instead of the Standard R-Value of 20 (Should be Negatively Priced) - All Applications Other Than Metal Roof Systems
INSULATION SUBSTITUTION OPTION
Deduct for Providing an R-Value of greater than or equal to 15, but less than 18; instead of the Standard R-Value of 20 (Should be Negatively Priced) - All Applications Other Than Metal Roof Systems INSULATION SUBSTITUTION OPTION:
Deduct for Providing an R-Value of greater than or equal to 18, but less than 20 instead of the Standard R-Value of 20 (Should be Negatively Priced) - All Applications Other Than Metal Roof Systems INSULATION SUBSTITUTION OPTION:
Add for Providing an R-Value of 25 Instead of the Standard R-Value of 20 - All Applications Other Than Metal Roof Systems
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Wood / Tectum Deck
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Lightweight / Gypsum Deck
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Concrete Deck
ADDITIONAL INSULATION OPTION (OVER AN EXISTING ROOF)
Install 1.0" of Polyisocyanurate Insulation Over an Existing Roof. All Wet Insulation Must be Replaced Prior to Installation of New Course of Insulation
ADDITIONAL INSULATION OPTION (OVER AN EXISTING ROOF)
Install 1.5" of Polyisocyanurate Insulation Over an Existing Roof. All Wet Insulation Must be Replaced Prior to Installation of New Course of Insulation
ADDITIONAL INSULATION OPTION (OVER AN EXISTING ROOF)
Install 2.0" of Polyisocyanurate Insulation Over an Existing Roof. All Wet Insulation Must be Replaced Prior to Installation of New Course of Insulation
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Wood / Tectum Deck
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Lightweight / Gypsum Deck
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Concrete Deck
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Adhered in Hot ASTM D 312 Type III or IV Asphalt; Mopped
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Adhered with Insulation Adhesive
RECOVERY BOARD TYPE
1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Metal Deck
DECK TYPE
Large Areas of Concrete Deck Replacement (Replacement areas averaging greater than 1 square)
DECK TYPE
Large Areas of Lightweight Deck Replacement (Replacement areas averaging greater than 1 square)
DECK TYPE
Large Areas of Tectum Deck Replacement (Replacement areas averaging greater than 1 square)
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Adhered in Hot ASTM D 312 Type III or IV Asphalt; Mopped
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Adhered with Insulation Adhesive
RECOVERY BOARD TYPE
1/2" Wood Fiber or Perlite Board Installed Over an Existing Roof Mechanically Fastened to Roof Deck - Metal Deck
DECK TYPE
Large Areas of Wood Deck Replacement (Replacement areas averaging greater than 1 square)
DECK TYPE
Large Areas of Gypsum Deck Replacement (Replacement areas averaging greater than 1 square)
4.22 SF
4.23 SF
4.24 SF
4.25 SF
4.26 SF
4.27 SF
4.28 SF
4.29 SF
4.30 SF
4.31 SF
4.32 SF
5.00 Coat New Roofing With Elastomeric Coating
5.01 SF
5.02 SF
5.03 SF
5.04 SF
5.05 SF
5.06 SF
5.07 SF
5.08 SF
5.09 SF
5.10 SF
5.11 SF
6.00 Roof Deck and Insulation Option
6.01 6.01.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Hot Mop Wood Fiber or Perlite to Provide
an Average R-Value of 20
In Compliance with FM 1-90
Requirements SF
6.02 ROOF SYSTEM TYPE
Apply a single-component, aliphatic, polyurea liquid adhesive per Specifications (Apply 1.0 gallon per Square on Seams & wait 24 Hours / Apply base coat at 1.0 gallon per Square / broadcast mineral at 35 lbs. per Square or white gravel at 200 lbs. per Square / wait 24 hours and apply top coat at 1.0 gallon per Square - Mineral-Surfaced Modified
ROOF SYSTEM TYPE
Apply a single-component, aliphatic, polyurea liquid adhesive per Specifications (apply base coat at 1.0 gallon per Square / broadcast mineral at 35 lbs. per Square or white gravel at 200 lbs. per Square / wait 24 hours and apply top coat at 1.0 gallon per Square - Smooth-Surfaced Modified
ROOF SYSTEM TYPE
Apply an Aluminum Coating per Specifications (3/4 Gallon per Square per Coat - 2 Coats Required) - Smooth or Mineral Surfaced Modified
ROOF SYSTEM TYPE
Apply a Fibered Aluminum Coating per Specifications (2 Gallons per Square per Coat - 1 Coat Required) - Smooth or Mineral Surfaced Modified
METAL ROOF DECK - HOT APPLICATION - ASTM D 312 TYPE III OR IV ASPHALT WOOD ROOF DECK - HOT APPLICATION - ASTM D 312 TYPE III OR IV ASPHALT
ROOF SYSTEM TYPE
Apply an Acrylic Coating per Specifications (1.0 Gallon per Square per Coat - 2 Coats Required) - Smooth-Surfaced Modified Roof
ROOF SYSTEM TYPE
Apply a bright white, water-based, acrylic-urethane hybrid roof coating per Specifications (1.5 Gallons per Square per Coat - 2 Coats Required) - Mineral-Surfaced Modified Roof
ROOF SYSTEM TYPE
Apply a bright white, water-based, acrylic-urethane hybrid roof coating per Specifications (1.0 Gallon per Square per Coat - 2 Coats Required) - Smooth-Surfaced Modified Roof
ROOF SYSTEM TYPE
Apply an Acrylic base coat and a PVDF top coat per Specifications (1.5 Gallons per Square Base Coat - 1/2 Gallon per Square Top Coat) - Mineral-Surfaced Modified Roof
ROOF SYSTEM TYPE
Apply an Acrylic base coat and a PVDF top coat per Specifications (1 Gallon per Square Base Coat - 1/2 Gallon per Square Top Coat) -Smooth-Surfaced Modified Roof
ROOF SYSTEM TYPE
Apply an Urethane Coating per Specifications (1 Gallon per Square per Coat - 2 Coats Required) - Smooth or Mineral Surfaced Modified; With Reinforced Seams (Base Coat Seam with 1.5 Gallons per Square & Reinforcement)
INSULATION SLOPE OPTION
Provide a 1/8" Tapered Polyisocyanurate Insulation System while Maintaining the Average R-Value; Adhered with Insulation Adhesive
INSULATION SUBSTITUTION OPTION
Provide a 1/4" Tapered Insulating Lightweight Concrete System while Maintaining Average R-Value
INSULATION SUBSTITUTION OPTION
Provide a 1/8" Tapered Insulating Lightweight Concrete System while Maintaining Average R-Value INSULATION ATTACHMENT OPTION:
Provide Attachment Pattern in Compliance with FM 1-60 Wind Uplift Instead of FM 1-90 INSULATION ATTACHMENT OPTION:
Provide Attachment Pattern in Compliance with FM 1-120 Wind Uplift Instead of FM 1-90
ROOF SYSTEM TYPE
Apply an Acrylic Coating per Specifications (1.5 Gallons per Square per Coat - 2 Coats Required) - Mineral-Surfaced Modified Roof
INSULATION SUBSTITUTION OPTION:
Add for Providing an R-Value of 30 Instead of the Standard R-Value of 20 - All Applications Other Than Metal Roof Systems
INSULATION SUBSTITUTION OPTION
Substitute 1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) in Place of the Wood Fiber or Perlite - Adhered in Hot ASTM D 312 Type III or IV Asphalt; Mopped
INSULATION SUBSTITUTION OPTION
Substitute 1/2" Treated Gypsum Insulation Board with Glass-Mat (e.g. DensDeck / Securock / Equal) in Place of the Wood Fiber or Perlite - Adhered with Insulation Adhesive
INSULATION SLOPE OPTION
Provide a 1/4" Tapered Polyisocyanurate Insulation System while Maintaining the Average R-Value Including Tapered Crickets; Adhered in ASTM D 312 Type III or IV Hot Asphalt; Mopped
INSULATION SLOPE OPTION
Provide a 1/8" Tapered Polyisocyanurate Insulation System while Maintaining the Average R-Value; Adhered in ASTM D 312 Type III or IV Hot Asphalt; Mopped
INSULATION SLOPE OPTION
Provide a 1/4" Tapered Polyisocyanurate Insulation System while Maintaining the Average R-Value Including Tapered Crickets; Adhered with Insulation Adhesive
6.02.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Hot Mop Wood Fiber or Perlite to Provide
an Average R-Value of 20 SF
6.02.02 INSULATION OPTION:
Without Insulation - Must Include Rosin &
Mechanically Fasten Glass Base Sheet SF
6.03 6.03.01 INSULATION OPTION:
Mechanically Attach Base Sheet Utilizing
FM 1-90 Attachment Patterns & Hot Mop
Polyisocyanurate / Hot Mop Wood Fiber
or Perlite to Provide an Average R-Value
of 20 SF
6.03.02 INSULATION OPTION:
Without Insulation - Must Include Rosin &
Mechanically Fasten Glass Base Sheet SF
6.04 6.04.01 INSULATION OPTION:
Must Mechanically Attach a Base Sheet;
Hot Mop Polyisocyanurate / Hot Mop
Wood Fiber or Perlite to Provide an
Average R-Value of 20
In Compliance FM 1-90 Requirements SF
6.04.02 INSULATION OPTION:
Without Insulation - Must at Least
Mechanically Fasten a Base Sheet to the
Roof Deck Prior to Installation
Installed with FM 1-90 Attachment
Patterns SF
6.05 6.05.01 INSULATION OPTION:
Prime Roof Deck; Hot Mop
Polyisocyanurate / Hot Mop Wood Fiber
or Perlite to Provide an Average R-Value
of 20
In Compliance FM 1-90 Requirements SF
6.05.02 INSULATION OPTION:
Without Insulation - Prime Roof Deck;
Must at Least 1/2" Wood Fiber or Perlite
Hot Mopped to Deck
In Compliance FM 1-90 Requirements SF
6.06 METAL ROOF DECK - COLD PROCESS APPLICATION
6.06.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Adhere High Density Asphalt Coated
Wood Fiber with Insulation Adhesive to
Provide an Average R-Value of 20
In Compliance FM 1-90 Requirements SF
6.07 WOOD ROOF DECK - COLD PROCESS APPLICATION
6.07.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Adhere High Density Asphalt Coated
Wood Fiber with Insulation Adhesive to
Provide an Average R-Value of 20 SF
6.07.02 INSULATION OPTION:
Without Insulation - Must Include Rosin &
Mechanically Fasten Glass Base Sheet SF
6.08 TECTUM ROOF DECK - COLD PROCESS APPLICATION
6.08.01 INSULATION OPTION:
Mechanically Attach Base Sheet &
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere High Density Asphalt
Coated Wood Fiber with Insulation
Adhesive to Provide an Average R-Value
of 20 SF
6.08.02 INSULATION OPTION:
Without Insulation - Must Include Rosin &
Mechanically Fasten Glass Base Sheet SF
6.09 6.09.01 INSULATION OPTION:
Must Mechanically Attach a Base Sheet;
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere High Density Asphalt
Coated Wood Fiber with Insulation
Adhesive to Provide an Average R-Value
of 20
In Compliance FM 1-90 Requirements SF
6.09.02 INSULATION OPTION:
Without Insulation - Must at Least
Mechanically Fasten a Base Sheet to the
Roof Deck
Installed with FM 1-90 Attachment
Patterns SF
6.10 CONCRETE ROOF DECK - COLD PROCESS APPLICATION
6.10.01 INSULATION OPTION:
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere High Density Asphalt
Coated Wood Fiber with Insulation
Adhesive to Provide an Average R-Value
of 20
In Compliance FM 1-90 Requirements SF
TECTUM ROOF DECK - HOT APPLICATION - ASTM D 312 TYPE III OR IV ASPHALT LIGHTWEIGHT CONCRETE / GYPSUM ROOF DECK - HOT APPLICATION - ASTM D 312 TYPE III OR IV ASPHALT CONCRETE ROOF DECK - HOT APPLICATION - ASTM D 312 TYPE III OR IV ASPHALT
LIGHTWEIGHT CONCRETE / GYPSUM ROOF DECK - COLD PROCESS APPLICATION
6.10.02 INSULATION OPTION:
Without Insulation - Must at Least 1/2"
High Density Asphalt Coated Wood Fiber
Adhered with Insulation Adhesive to Deck
In Compliance FM 1-90 Requirements SF
6.11 METAL ROOF DECK - TORCH APPLIED / SELF-ADHERING APPLICATION
6.11.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Adhere Treated Gypsum Insulation Board
with Glass-Mat (e.g. DensDeck /
Securock / Equal) with Insulation
Adhesive to Provide an Average R-Value
of 20
In Compliance FM 1-90 Requirements SF
6.12 WOOD ROOF DECK - TORCH APPLIED / SELF-ADHERING APPLICATION
6.12.01 INSULATION OPTION:
Mechanically Fasten Polyisocyanurate /
Adhere Treated Gypsum Insulation Board
with Glass-Mat (e.g. DensDeck /
Securock / Equal) with Insulation
Adhesive to Provide an Average R-Value
of 20 SF
6.12.02 INSULATION OPTION:
Without Insulation - Must Mechanically
Attach 1/2" Treated Gypsum Insulation
Board with Glass-Mat (e.g. DensDeck /
Securock / Equal) SF
6.13 6.13.01 INSULATION OPTION:
Mechanically Attach Base Sheet &
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal) with
Insulation Adhesive to Provide an
Average R-Value of 20 SF
6.13.02 INSULATION OPTION:
Without Insulation - Must Mechanically
Attach 1/2" Treated Gypsum Insulation
Board with Glass-Mat (e.g. DensDeck /
Securock / Equal) SF
6.14 6.14.01 INSULATION OPTION:
Must Mechanically Attach a Base Sheet;
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal) with
Insulation Adhesive to Provide an
Average R-Value of 20
In Compliance FM 1-90 Requirements SF
6.14.02 INSULATION OPTION:
Without Insulation - Must at Least
Mechanically Fasten a Base Sheet to the
Roof Deck Prior to Installation
Installed with FM 1-90 Attachment
Patterns SF
6.15 6.15.01 INSULATION OPTION:
Adhere Polyisocyanurate in Insulation
Adhesive / Adhere Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal) with
Insulation Adhesive to Provide an
Average R-Value of 20
In Compliance FM 1-90 Requirements SF
6.15.02 INSULATION OPTION:
Without Insulation - Must Adhere 1/2"
Treated Gypsum Insulation Board with
Glass-Mat (e.g. DensDeck / Securock /
Equal) in Insulation Adhesive
In Compliance FM 1-90 Requirements SF
6.16 6.16.01 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON METAL DECK:
Mechanically-Fasten Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal), Apply 2
Plies of Glass Felt in Hot ASTM D 312
Type III OR IV Asphalt
In Compliance with FM 1-90
Requirements SF
CONCRETE ROOF DECK - TORCH APPLIED / SELF-ADHERING APPLICATION INSTALL PRIOR TO ROOF SYSTEM INSULATION:
TECTUM ROOF DECK - TORCH APPLIED / SELF-ADHERING APPLICATION
LIGHTWEIGHT CONCRETE / GYPSUM ROOF DECK - TORCH APPLIED / SELF-ADHERING APPLICATION
6.16.02 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON WOOD, TECTUM,
LIGHTWEIHT CONCRETE OR
GYPSUM DECK: Mechanically Fasten
Glass Base Sheet, Apply 2 Plies of Glass
Felt in Hot ASTM D 312 Type III OR IV
Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.03 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON CONCRETE DECK:
Prime Deck Prior to Applying 2 Plies of
Glass Felt in Hot ASTM D 312 Type III
OR IV Asphalt SF
6.16.04 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON METAL DECK:
Mechanically-Fasten Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal); Apply 2
Plies of Glass Base in Cold Process
Modified Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.05 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON WOOD, TECTUM,
LIGHTWEIHT CONCRETE OR
GYPSUM DECK: Mechanically Fasten
Glass Base Sheet, Apply 2 Plies of Glass
Base in Cold Process Modified Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.06 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON CONCRETE DECK:
Prime Deck Prior to Applying 2 Plies of
Glass Base in Cold Process Modified
Asphalt SF
6.16.07 VAPOR BARRIER OPTION:
TORCH-APPLIED VAPOR BARRIER
ON METAL DECK:
Mechanically-Fasten Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal); Heat
Weld with Torch 1 Ply of SBS Modified
Asphalt-Based, Fiberglass Reinforced
Torch Base Sheet - Minimum of 80 lbf/in
tensile Torch-Applied Base Sheet (ASTM
D 5147)
In Compliance with FM 1-90
Requirements SF
6.16.08 VAPOR BARRIER OPTION:
TORCH-APPLIED VAPOR BARRIER
ON WOOD, TECTUM, LIGHTWEIHT
CONCRETE OR GYPSUM DECK:
Mechanically Fasten Glass Base Sheet,
Heat Weld with Torch 1 Ply of SBS
Modified Asphalt-Based, Fiberglass
Reinforced Torch Base Sheet - Minimum
of 80 lbf/in tensile Torch-Applied Base
Sheet (ASTM D 5147)
In Compliance with FM 1-90
Requirements SF
6.16.09 VAPOR BARRIER OPTION:
TORCH-APPLIED VAPOR BARRIER
ON CONCRETE DECK:
Prime Deck Prior to Heat Welding with
Torch 1 Ply of SBS Modified AsphaltBased, Fiberglass Reinforced Torch Base Sheet - Minimum of 80 lbf/in tensile
Torch-Applied Base Sheet (ASTM D
5147) SF
6.16.10 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON METAL DECK:
Mechanically-Fasten Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal), ASTM D
6163 SBS Fiberglass Reinforced
Modified Bituminous Sheet Material Type
I - 70 lbf/in tensile in Hot ASTM D 312
Type III OR IV Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.11 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON WOOD, TECTUM,
LIGHTWEIHT CONCRETE OR
GYPSUM DECK: Mechanically Fasten
Glass Base Sheet, ASTM D 6163 SBS
Fiberglass Reinforced Modified
Bituminous Sheet Material Type I - 70
lbf/in tensile in Hot ASTM D 312 Type III
OR IV Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.12 VAPOR BARRIER OPTION:
HOT ASPHALT-APPLIED VAPOR
BARRIER ON CONCRETE DECK:
Prime Deck Prior to ASTM D 6163 SBS
Fiberglass Reinforced Modified
Bituminous Sheet Material Type I - 70
lbf/in tensile in Hot ASTM D 312 Type III
OR IV Asphalt SF
6.16.13 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON METAL DECK:
Mechanically-Fasten Treated Gypsum
Insulation Board with Glass-Mat (e.g.
DensDeck / Securock / Equal); ASTM D
6163 SBS Fiberglass Reinforced
Modified Bituminous Sheet Material Type
I - 70 lbf/in tensile in Cold Process
Modified Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.14 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON WOOD, TECTUM,
LIGHTWEIHT CONCRETE OR
GYPSUM DECK: Mechanically Fasten
Glass Base Sheet, ASTM D 6163 SBS
Fiberglass Reinforced Modified
Bituminous Sheet Material Type I - 70
lbf/in tensile in Cold Process Modified
Asphalt
In Compliance with FM 1-90
Requirements SF
6.16.15 VAPOR BARRIER OPTION:
COLD ASPHALT-APPLIED VAPOR
BARRIER ON CONCRETE DECK:
Prime Deck Prior to ASTM D 6163 SBS
Fiberglass Reinforced Modified
Bituminous Sheet Material Type I - 70
lbf/in tensile in Cold Process Modified
Asphalt SF
7.00 BUILT-UP MODIFIED ROOF WITH FLOOD COAT AND AGGREGATE IN HOT ASTM D 312 TYPE III OR IV ASPHALT
7.01 7.01.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
7.01.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
7.01.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
7.01.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
7.01.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
7.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 7.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
7.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
7.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
ROOF CONFIGURATION
2 Plies of Glass Felt, Cap Sheet, Flood Coat and Aggregate All in Hot ASTM D 312 Type III OR IV Asphalt
7.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
7.06 DEDUCT TO SQUARE FOOT COST - Hot Applied Modified BUR Substitute Additional Glass Felt (Hot Applications) in Place of ASTM D 6163 SBS Fiberglass Reinforced Modified Bituminous Sheet Material Type I - Minimum of 70 lbf/in tensile (i.e. 3 Ply BUR) SF
7.07 ADD TO PER SQUARE FOOT COST - Hot Applied Modified BUR Each Additional Glass Felt (Hot Applications) Inter-ply Installed SF
8.00 BUILT-UP MODIFIED ROOF WITH FLOOD COAT AND AGGREGATE IN
COLD PROCESS ASPHALT
8.01 8.01.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
8.01.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
8.01.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
8.01.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
8.01.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
8.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 8.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
8.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
8.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
8.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
8.06 DEDUCT TO SQUARE FOOT COST - Cold Applied Modified BUR Substitute Additional Glass Base Sheet in Place of ASTM D 6163 SBS Fiberglass Reinforced Modified Bituminous Sheet Material Type I - Minimum of 70 lbf/in tensile (i.e. 3 Ply BUR) SF
8.07 ADD TO PER SQUARE FOOT COST - Cold Applied Modified BUR Each Additional Glass Base (Cold Applications) Inter-ply Installed SF
9.00 BUILT-UP MODIFIED ROOF ADHERED IN HOT ASTM D 312 TYPE III OR IV
ASPHALT - FLOOD COAT & AGGREGATE IN MODIFIED COAL TAR PITCH
9.01 9.01.01 ROOFING MEMBRANE & COATING OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
9.01.02 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
9.01.03 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
9.01.04 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
ROOF CONFIGURATION
2 Plies of Glass Base, Cap Sheet, Flood Coat and Aggregate All in Cold Process Modified Asphalt
ROOF CONFIGURATION
2 ply of Glass Felt, Cap Sheet, Set in Hot Asphalt, Flood Coat in Modified Coal Tar Pitch and Aggregate
9.01.05 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - 600 lbf/in tensile, Flood
Coat in Modified Hot Coal Tar Pitch With
2000% Elongation SF
9.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 9.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
9.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
9.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
9.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
9.06 COATING OPTION:
Add/Deduct for Installing Flood Coat in
Cold Process Coal Tar Pitch SF
10.00 BUILT-UP MODIFIED ROOF WITH MINERAL CAP SHEET ADHERED IN HOT ASTM D 312 TYPE III OR IV ASPHALT
10.01 10.01.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
10.01.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
10.01.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
10.01.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
10.01.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
10.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 10.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
10.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar SF
10.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar SF
10.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
11.00 BUILT-UP MODIFIED ROOF WITH MINERAL CAP SHEET ADHERED IN
COLD PROCESS ASPHALT
11.01 11.01.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
11.01.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
11.01.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
11.01.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
11.01.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
ROOF CONFIGURATION
2 ply Glass Base, Mineral Cap Sheet, Set in Cold Process Modified Asphalt
ROOF CONFIGURATION
2 ply of Glass Felt, Mineral Surfaced Cap Sheet, Set in Hot ASTM D 312 Type III or IV Asphalt
11.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 11.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
11.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar SF
11.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar SF
11.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.00 2-PLY ROOF SYSTEMS - COMBINATIONS OF A BASE PLY & A CAP
SHEET (TOP PLY)
PLEASE NOTE: BASE PLY & CAP SHEET COMBINATIONS MUST BE
APPROVED BY THE MANUFACTURER
12.01 12.01.01 BASE PLY OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - 70 lbf/in tensile SF
12.01.02 BASE PLY OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - 220 lbf/in tensile SF
12.01.03 BASE PLY OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - 310 lbf/in tensile SF
12.01.04 SF
12.02 12.02.01 BASE PLY OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - 70 lbf/in tensile SF
12.02.02 BASE PLY OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - 220 lbf/in tensile SF
12.02.03 BASE PLY OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - 310 lbf/in tensile SF
12.02.04 SF
12.02.05 INTERPLY ADHESIVE OPTION:
Add/Deduct for Cold Applied Modified
Multi-ply Systems
Substitute Cold Process Adhesive with
Alternative Solvent Free Adhesive SF
12.03 12.03.01 BASE PLY OPTION:
SBS Modified Asphalt-Based, Fiberglass
Reinforced Torch Base Sheet - Minimum
of 80 lbf/in tensile Torch-Applied Base
Sheet (ASTM D 5147) SF
12.03.02 BASE PLY OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - 210 lbf/in tensile SF
12.03.03 SF
12.04 12.04.01 BASE PLY OPTION:
SBS Modified Asphalt-Based, Polyester
OR Fiberglass/Polyester OR Fiberglass
Reinforced Self-Adhering Base Sheet -
Minimum of 50 lbf/in tensile SF
12.04.02 SF
12.05 ADD/DEDUCT TO PER SQUARE FOOT COST - Torch-Applied Modified Multi-ply Systems Each Additional Modified Base Sheet (All Torch-Applied Applications) Installed. To be combined with line items above for a labor cost reduction to installed price of two plies of the same modified base sheet vs. the installation of a single base sheet (i.e. 12.03.02 + 12.03.02 + 12.03.03 = Two Plies Installed)
ROOF CONFIGURATION
1 Ply of Self-Adhering Base Installed Using Self-Adhering Backing ADD/DEDUCT TO PER SQUARE FOOT COST - Torch-Applied Modified Multi-ply Systems Each Additional Modified Base Sheet (All Torch-Applied Applications) Installed. To be combined with line items above for a labor cost reduction to installed price of two plies of the same modified base sheet vs. the installation of a single base sheet (i.e. 12.04.01 + 12.04.01 + 12.04.02 = Two Plies Installed)
ROOF CONFIGURATION
1 Ply Cap Sheet, Flood Coat and Aggregate Adhered in Hot ASTM D 312 Type III OR IV Asphalt
ROOF CONFIGURATION
1 Ply Modified Base Sheet Adhered in Hot ASTM D 312 Type III or IV Asphalt ADD/DEDUCT TO PER SQUARE FOOT COST - Hot Applied Modified Multi-ply Systems Each Additional Modified Base Sheet (All Hot Applications) Installed. To be combined with line items above for a labor cost reduction to installed price of two plies of the same modified base sheet vs. the installation of a single base sheet (i.e.
12.01.02 + 12.01.02 + 12.01.04 = Two Plies Installed)
ROOF CONFIGURATION
1 Ply Modified Base Sheet Adhered in Cold Process Modified Asphalt ADD/DEDUCT TO PER SQUARE FOOT COST - Cold Applied Modified Multi-ply Systems Each Additional Modified Base Sheet (All Cold Applications) Installed. To be combined with line items above for a labor cost reduction to installed price of two plies of the same modified base sheet vs. the installation of a single base sheet (i.e.
12.02.02 + 12.02.02 + 12.02.04 = Two Plies Installed)
ROOF CONFIGURATION
1 Ply of Torch Base Sheet Installed with Torch Application
12.05.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
12.05.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
12.05.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
12.05.06 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.05
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.05.07 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.05.08 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.05.09 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.06 12.06.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
12.06.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
12.06.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
12.06.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
12.06.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
12.06.06 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.06
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.06.07 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.06.08 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.06.09 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.07 12.07.01 ROOFING MEMBRANE & COATING OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
12.07.02 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
12.07.03 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
ROOF CONFIGURATION
1 Ply Mineral Surfaced Cap Sheet Adhered in Hot ASTM D 312 Type III or IV Asphalt
ROOF CONFIGURATION
1 Ply Cap Sheet, Set in Hot ASTM D 312 Type III or IV Asphalt, Flood Coat & Aggregate in Hot Modified Coal Tar Pitch
12.07.04 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
12.07.05 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum 600 lbf/in
tensile, Flood Coat in Modified Hot Coal
Tar Pitch With 2000% Elongation SF
12.07.06 COATING OPTION:
Add/Deduct for Installing Flood Coat in
Cold Process Coal Tar Pitch SF
12.07.07 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.07
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.07.08 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.07.09 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.07.10 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.08 12.08.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
12.08.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
12.08.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
12.08.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
12.08.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
12.08.06 MEMBRANE ADHESIVE & COATING OPTION:
Add/Deduct for Cold Applied Modified
BUR
Substitute Cold Process Adhesive with
Alternative Solvent Free Adhesive SF
12.08.07 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.08
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.08.08 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.08.09 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.08.10 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.09 12.09.01 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
12.09.02 ROOFING MEMBRANE OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
12.09.03 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
ROOF CONFIGURATION
1 Ply Cap Sheet, Flood Coat and Aggregate Adhered in Cold Process Modified Asphalt
ROOF CONFIGURATION
1 Ply Mineral Surfaced Cap Sheet Adhered in Cold Process Modified Asphalt
12.09.04 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
12.09.05 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 600 lbf/in
tensile SF
12.09.06 MEMBRANE ADHESIVE OPTION:
Add/Deduct for Cold Applied Modified
BUR
Substitute Cold Process Adhesive with
Alternative Solvent Free Adhesive SF
12.09.07 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.09
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.09.08 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.09.09 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.09.10 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.10 12.10.01 ROOFING MEMBRANE & COATING OPTION:
ASTM D 6163 SBS Fiberglass
Reinforced Modified Bituminous Sheet
Material Type I - Minimum of 70 lbf/in
tensile SF
12.10.02 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 220 lbf/in
tensile SF
12.10.03 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 310 lbf/in
tensile SF
12.10.04 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 500 lbf/in
tensile SF
12.10.05 ROOFING MEMBRANE & COATING OPTION
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum 600 lbf/in
tensile SF
12.10.06 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.10
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.10.07 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.10.08 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.10.09 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.11 12.11.01 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum 300 lbf/in
tensile Torch-Applied Membrane SF
12.11.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.11
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.11.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.11.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
ROOF CONFIGURATION
1 Ply Cap Sheet, Set in Cold Process Asphalt, Flood Coat & Aggregate in Cold Applied Modified Coal Tar Pitch and Aggregate
ROOF CONFIGURATION
1 Ply of Mineral Surfaced, Torch-Applied Cap Sheet Installed with Torch Application
12.11.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.12 12.12.01 ROOFING MEMBRANE OPTION:
ASTM D 6162 SBS Fiberglass/Polyester
Reinforced Modified Bituminous Sheet
Material Type III - Minimum of 300 lbf/in
tensile Torch-Applied Membrane SF
12.12.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.12
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.12.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar SF
12.12.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar SF
12.12.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.13 12.13.01 ROOF CONFIGURATION OPTION:
ASTM D 6161 (Polyester) OR 6162
(Fiberglass/Polyester) OR 6163
(Fiberglass) Self-Adhering Reinforced
Modified Bituminous Sheet Material Type
III - Minimum of 130 lbf/in tensile SF
12.13.02 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.13
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.13.03 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.13.04 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.13.05 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.14 12,14.01 POLYMERIC TOP PLY OPTION:
ASTM D 6754 - Ketone Ethylene Ester
(KEE) - 50 Mil Thickness SF
12.14.02 POLYMERIC TOP PLY OPTION:
ASTM D 6754 - Ketone Ethylene Ester
(KEE) - 60 Mil Thickness SF
12.14.03 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.14
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.14.04 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.14.05 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
12.14.06 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
12.15 12.15.01 POLYMERIC TOP PLY OPTION:
ASTM D 6754 - Ketone Ethylene Ester
(KEE) - 50 Mil Thickness SF
12.15.02 POLYMERIC TOP PLY OPTION:
ASTM D 6754 - Ketone Ethylene Ester
(KEE) - 60 Mil Thickness SF
12.15.03 MEMBRANE ADHESIVE OPTION:
Add/Deduct for Cold Applied FleeceBack Polymeric Cap Sheet (Top Ply) Substitute Membrane Adhesive with Cold
Applied Asphalt Adhesive SF
12.15.04 MEMBRANE ADHESIVE OPTION:
PER SQUARE FOOT COST - Cold
Applied Fleece-Back Polymeric Cap
Sheet (Top Ply)
Substitute Membrane Adhesive with
Solvent-Free Asphalt Adhesive SF
ROOF CONFIGURATION
1 Ply Fleece-Back Polymeric Cap Sheet (Top Ply) Adhered in Hot ASTM D 312 Type III OR IV Asphalt with Heat Welded Seams
ROOF CONFIGURATION
1 Ply Fleece-Back Polymeric Cap Sheet (Top Ply) Adhered in Membrane Adhesive with Heat Weld Seams
ROOF CONFIGURATION
1 Ply of Torch-Applied Cap Sheet Installed with Torch Application and Finished with a Flood Coat & Aggregate in Cold Process Modified Asphalt
ROOF CONFIGURATION
1 Ply of Mineral Surfaced, Self-Adhering Cap Sheet Installed Using Self-Adhering Backing
12.15.05 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 12.15
Must includes coverage for roof uplift
pressures up to 90 MPH SF
12.15.06 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar SF
12.15.08 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar SF
12.15.09 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
13.00 BUILT-UP COAL TAR ROOF WITH FLOOD COAT AND AGGREGATE IN
MODIFIED HOT COAL TAR PITCH
13.01 13.01.01 ROOF CONFIGURATION OPTION:
4-Ply ASTM D 4990 Type I Coal Tar
Saturated Felts in Modified Coal Tar
Pitch; Modified CTP with 2000%
Elongation SF
13.01.02 ROOF CONFIGURATION OPTION:
3-Ply Continuous Filament Polyester Mat
(5.0 oz./yd2) in Modified Coal Tar Pitch;
Modified CTP with 2000% Elongation SF
13.02 INTERPLY ADHESIVE & FLOOD COAT OPTION:
PER SQUARE FOOT COST -
SUBSTITUTE STANDARD COAL TAR
PITCH
Add/Deduct for Using Standard Coal Tar
Pitch Instead of Modified Coal Tar Pitch SF
13.03 FLOOD COAT OPTION:
PER SQUARE FOOT COST -
SUBSTITUTE COLD PROCESS+
MODIFIED COAL TAR PITCH FOR
FLOOD COAT
Add/Deduct for Using Cold Process
Modified Coal Tar Pitch for Flood Coat
Instead of Hot Modified Coal Tar
Pitch+B222 SF
13.04 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 13.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
13.05 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
13.06 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
13.07 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
14.00 METAL ROOFING SYSTEMS - LOW SLOPE & STEEP SLOPE (2)
14.01 14.01.01 INSULATION OPTION:
Architectural Application -
No Insulation; 30 lbs. Felt Underlayment
Over Deck SF
14.01.02 INSULATION OPTION:
Architectural Application -
No Insulation - WOOD DECK: Class A
Fire-Retardant Underlayment SF
14.01.03 INSULATION OPTION:
Architectural Application -
Minimal Insulation - WOOD OR METAL
DECK: Must Have 1/2" Treated Gypsum
Board with Glass-Mat (e.g. DensDeck /
Securock / Equal); & 40 mil Self-Adhering
Underlayment SF
14.01.04 INSULATION OPTION:
Architectural Application -
Mechanically Fasten Polyisocyanurate to
Provide an Average R-Value of 20; with
40 mil Self-Adhering Underlayment SF
14.01.05 INSULATION OPTION:
Structural Application Over Open
Framing; Over Retrofit Framing; Over an
Existing Roof Using Steel Furring -
No Insulation SF
14.01.06 INSULATION OPTION:
Structural Application Over Open
Framing or Over Retrofit Framing -
Fiberglass Batten Insulation with an RValue of 30 SF
14.01.07 INSULATION OPTION:
Structural Application Over Retrofit
Framing -
Loose Laid Fiberglass Blanket on
Existing Deck with an R-Value of 30 SF
ROOF CONFIGURATION
1 Ply of Glass Base, 3 Plies of Polyester Mat or 4 ply of Coal Tar Felts in Modified Hot Coal Tar Pitch (CTP), [Insulation & Glass Base] Set in Hot ASTM D 312 Type III or IV Asphalt
INSULATION OPTIONS FOR ARCHITECTURAL STANDING SEAM ROOF INSTALLATION OVER SUBSTRATE
14.01.08 INSULATION OPTION:
Structural Application Over an Existing
Roof Using Steel Furring -
Fiberglass Batten Insulation with an RValue of 20 SF
14.01.09 INSULATION OPTION:
Structural Application Over an Existing
Roof Using Steel Furring -
Mechanically Fastened Polyisocyanurate
on Existing Roof with an R-Value of 20 SF
14.02 14.02.01 THICKNESS OPTION:
Bare Aluminum Panel Price -
0.032" Aluminum, 18" - 19" Wide Panels SF
14.02.02 THICKNESS OPTION:
Add for Bare Aluminum 0.040"
Aluminum , 18" - 19" Wide Panels SF
14.02.03 PANEL WIDTH OPTION: Add for 12" - 13" Panel Width - Aluminum SF
14.02.04 PANEL WIDTH OPTION: Add for 16" - 17" Panel Width - Aluminum SF
14.02.05 PANEL WIDTH OPTION: Add for 24" - 25" Panel Width - Aluminum SF
14.02.06 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 24 Ga, 18" - 19" Wide
Panels SF
14.02.07 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 22 Ga, 18" - 19" Wide
Panels SF
14.02.08 PANEL WIDTH OPTION:
Add for 12" - 13" Panel Width -
Galvalume Coated Steel or Equal SF
14.02.09 PANEL WIDTH OPTION:
Add for 16" - 17" Panel Width -
Galvalume Coated Steel or Equal SF
14.02.10 PANEL WIDTH OPTION:
Add for 24" - 25" Panel Width -
Galvalume Coated Steel or Equal SF
14.02.11 COLOR OPTION:
Add for Standard Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.02.12 COLOR OPTION:
Add for Designer Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.02.13 COLOR OPTION:
Add for Premium or Custom Colors -
Fluorocarbon Paint System Over
Aluminum or Galvalume Coated Steel Or
Equal SF
14.02.14 THICKNESS OPTION:
Stainless Steel
Panel Price - 24 Ga , 18" - 19" Wide
Panels SF
14.02.15 THICKNESS OPTION:
Stainless Steel
Panel Price - 22 Ga, 18" - 19" Wide
Panels SF
14.02.16 PANEL WIDTH OPTION:
Add for 12" - 13" Panel Width - Stainless
Steel SF
14.02.17 PANEL WIDTH OPTION:
Add for 16" - 17" Panel Width - Stainless
Steel SF
14.02.18 PANEL WIDTH OPTION:
Add for 24" - 25" Panel Width - Stainless
Steel SF
14.02.19 THICKNESS OPTION:
Copper
Panel Price - 16 oz,18" - 19" Wide
Panels SF
14.02.20 THICKNESS OPTION:
Copper
Panel Price - 20 Oz, 18" - 19" Wide
Panels SF
14.02.21 PANEL WIDTH OPTION: Add for 12" - 13" Panel Width - Copper SF
14.02.22 PANEL WIDTH OPTION: Add for 16" - 17" Panel Width - Copper SF
14.02.23 PANEL WIDTH OPTION: Add for 24" - 25" Panel Width - Copper SF
14.02.24 THICKNESS OPTION:
Zinc
Panel Price - 0.032", 18" - 19" Wide
Panels SF
14.02.25 THICKNESS OPTION:
Zinc
Panel Price - 0.040", 18" - 19" Wide
Panels SF
14.02.26 PANEL WIDTH OPTION: Add for 12" - 13" Panel Width - Zinc SF
14.02.27 PANEL WIDTH OPTION: Add for 16" - 17" Panel Width - Zinc SF
14.02.28 PANEL WIDTH OPTION: Add for 24" - 25" Panel Width - Zinc SF
14.02.29 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
a Deck At or Above 3:12 Slope SF
14.02.30 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
a Deck Below 3:12 Slope
SF
14.02.31 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Open Framing At or Above 3:12 Slope
SF
ROOF CONFIGURATION
Architectural or Structural Standing Seam Roof System; Seam Height At or Above 2"
14.02.32 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Open Framing Below 3:12 Slope
SF
14.02.33 PANEL INSTALLATION OPTION:
Structural Application -
At or Above 3:12 Slope -
Installed Over Retrofit Framing System SF
14.02.34 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Retrofit Framing System Below 3:12
Slope
SF
14.02.35 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Existing Roof Using Steel Furring At or
Above 3:12 Slope
SF
14.02.36 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Existing Roof Using Steel Furring Below
3:12 Slope SF
14.02.37 PANEL FABRICATION OPTION:
On-Site Roll Forming - To achieve panel
lengths in excess of shipping or
transportation limitations SF
14.02.38 PANEL FABRICATION OPTION:
Curving Panels - Curving panels to meet
architectural requirements SF
14.02.39 PANEL FABRICATION OPTION:
Tapering Panels - Tapering panels to
meet architectural requirements SF
14.02.40 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 13.00
Must includes coverage for roof uplift
pressures up to 90 MPH SF
14.02.41 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
14.02.42 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
14.02.43 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
14.03 14.03.01 THICKNESS OPTION:
Bare Aluminum Panel Price -
0.032" Aluminum, 18" Wide Panels SF
14.03.02 THICKNESS OPTION:
Add for Bare Aluminum 0.040"
Aluminum , 18" Wide Panels SF
14.03.03 PANEL WIDTH OPTION: Add for 12" Panel Width - Aluminum SF
14.03.04 PANEL WIDTH OPTION: Add for 16" Panel Width - Aluminum SF
14.03.05 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 24 Ga, 18" Wide Panels SF
14.03.06 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 22 Ga, 18" Wide Panels SF
14.03.07 PANEL WIDTH OPTION:
Add for 12" Panel Width - Galvalume
Coated Steel or Equal SF
14.03.08 PANEL WIDTH OPTION:
Add for 16" Panel Width - Galvalume
Coated Steel or Equal SF
14.03.09 COLOR OPTION:
Add for Standard Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.03.10 COLOR OPTION:
Add for Designer Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.03.11 COLOR OPTION:
Add for Premium or Custom Colors -
Fluorocarbon Paint System Over
Aluminum or Galvalume Coated Steel Or
Equal SF
14.03.12 THICKNESS OPTION:
Stainless Steel
Panel Price - 24 Ga , 18" Wide Panels SF
14.03.13 THICKNESS OPTION:
Stainless Steel
Panel Price - 22 Ga, 18" Wide Panels SF
14.03.14 PANEL WIDTH OPTION: Add for 12" Panel Width - Stainless Steel SF
14.03.15 PANEL WIDTH OPTION: Add for 16" Panel Width - Stainless Steel SF
14.03.16 THICKNESS OPTION:
Copper
Panel Price - 16 oz,18" Wide Panels SF
14.03.17 THICKNESS OPTION:
Copper
Panel Price - 20 Oz, 18" Wide Panels SF
14.03.18 PANEL WIDTH OPTION: Add for 12" Panel Width - Copper SF
14.03.19 PANEL WIDTH OPTION: Add for 16" Panel Width - Copper SF
14.03.20 THICKNESS OPTION:
Zinc
Panel Price - 0.032", 18" Wide Panels SF
ROOF CONFIGURATION
Architectural or Structural Standing Seam Roof System; Seam Height At or Above 1" Below 2"; Aluminum Panels
14.03.21 THICKNESS OPTION:
Zinc
Panel Price - 0.040", 18" Wide Panels SF
14.03.22 PANEL WIDTH OPTION: Add for 12" Panel Width - Zinc SF
14.03.23 PANEL WIDTH OPTION: Add for 16" Panel Width - Zinc SF
14.03.24 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
Substrate At or Above 3:12 Slope
SF
14.03.25 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
Substrate Below 3:12 Slope
SF
14.03.26 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Open Framing At or Above 3/12 Slope
SF
14.03.27 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Retrofit Framing System At or Above
3:12 Slope
SF
14.03.28 PANEL INSTALLATION OPTION:
Structural Application - Installed Over
Existing Roof Using Steel Furring
At or Above 3:12 Slope SF
14.03.30 WARRANTY CHARGE:
Cost to Provide 20 Year - Labor &
Material Warranty with No Dollar
Limitations as a Standard Warranty for
All Applications in this Section 14.03
Must includes coverage for roof uplift
pressures up to 90 MPH SF
14.03.31 WARRANTY UPCHARGE:
Add to provide coverage for a 25 Year
Labor & Material Warranty with No Dollar
Limitations SF
14.03.32 WARRANTY UPCHARGE:
Add to provide coverage for a 30 Year
Labor & Material Warranty with No Dollar
Limitations SF
14.03.33 WARRANTY UPCHARGE:
Add to provide coverage for roof uplift
pressures up to 120 MPH SF
14.04 14.04.01 THICKNESS OPTION:
Bare Aluminum Panel Price -
0.032" Aluminum, 14.5" Wide Panels SF
14.04.02 THICKNESS OPTION:
Add for Bare Aluminum 0.040"
Aluminum, 14.5" Wide Panels SF
14.04.03 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 24 Ga, 14.5" Wide Panels SF
14.04.04 THICKNESS OPTION:
Bare Galvalume Coated Steel or Equal
Panel Price - 22 Ga, 14.5" Wide Panels SF
14.04.05 COLOR OPTION:
Add for Standard Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.04.06 COLOR OPTION:
Add for Designer Colors - Fluorocarbon
Paint System Over Aluminum or
Galvalume Coated Steel Or Equal SF
14.04.07 COLOR OPTION:
Add for Premium or Custom Colors -
Fluorocarbon Paint System Over
Aluminum or Galvalume Coated Steel Or
Equal SF
14.04.08 THICKNESS OPTION:
Stainless Steel
Panel Price - 24 Ga, 14.5" Wide Panels SF
14.04.09 THICKNESS OPTION:
Stainless Steel
Panel Price - 22 Ga, 14.5" Wide Panels SF
14.04.10 THICKNESS OPTION:
Copper
Panel Price - 16 Oz., 14.5" Wide Panels SF
14.04.11 THICKNESS OPTION:
Copper
Panel Price - 20 Oz., 14.5" Wide Panels SF
14.04.12 THICKNESS OPTION:
Zinc
Panel Price - 0.032" , 14.5" Wide Panels SF
14.04.13 THICKNESS OPTION:
Zinc
Panel Price - 0.040", 14.5" Wide Panels SF
14.04.14 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
Substrate At or Above 3:12 Slope SF
14.04.15 PANEL INSTALLATION OPTION:
Architectural Application - Installed Over
Substrate Below 3:12 Slope SF
ROOF CONFIGURATION
Architectural Standing Seam Roof System; Seam Height Below 1"
14.04.16 WARRANTY CHARGE:
Cost to Provide 15 Year - Material
Warranty Limited to the Dollar Amount of
the Material Original Purchase as a
Standard Warranty for All Applications in
this Section 14.04
Must includes coverage for roof uplift
pressures up to 90 MPH SF
14.05 ROOF CONFIGURATION
Flat Seam Metal Roof System - 8' Wide / 30 Gauge
14.05.01 INSULATION OPTION:
3/4" of Expanded Polystyrene (Minimum
1.5 lbs./cft) - Includes Panel and
Installation of Roof System SF
14.05.02 INSULATION OPTION:
Mechanically Fastened Polyisocyanurate
with an Average R-Value of 20 - Includes
Panel and Installation of Roof System SF
14.05.03 UNDERLAYMENT OPTION:
Add Install 40 mil self-adhesive
membrane as an Underlayment SF
14.05.04 PANEL WIDTH OPTION: Add/Deduct for 6' Wide Option SF
14.05.05 PANEL WIDTH OPTION: Add/Deduct for 10' Wide Option SF
14.05.06 PANEL WIDTH OPTION: Add/Deduct for 12' Wide Option SF
14.05.07 WARRANTY CHARGES:
Cost to Provide 15 Year - Material
Warranty Limited to the Dollar Amount of
the Material Original Purchase as a
Standard Warranty for All Applications in
this Section 14.05
Must includes coverage for roof uplift
pressures up to 90 MPH SF
15.00 RESTORATIONS - RECOATING OF EXISTING ROOF SYSTEMS
15.01 SF
15.02 LF
15.03 SF
15.04 SF
15.05 SF
15.06 SF
15.07 SF
15.08 SF
15.09 SF
15.10 SF
RESTORATION OF METAL ROOF SYSTEM WITH SYNTHETIC RUBBER COLD-APPLIED COATING Prepare Metal Roof Surface by Scraping, Sanding, Wire Brush or Blasting (USE SEPRATE LINE ITEM FOR BLASTING OR WIRE BRUSHING); Clean with TSP or Simple Green; Use Portable Blowers to Clear Roof of Moisture; Apply seam sealer to seams (1 Gallon per 14 left) Base Coat / Top Coat with Synthetic Rubberized Restorative Coating (1.5 Gallons per Sq.) According to Manufacturer's Specifications
RESTORATION OF A METAL ROOF SYSTEM WITH SINGLE-COMPONENT URETHANE Prepare Metal Roof Surface by Scraping, Sanding, Wire Brush or Blasting (USE SEPARATE LINE ITEM FOR BLASTING OR WIRE BRUSHING); Clean with TSP or Simple Green, Apply Primer with Rust Inhibiting and Chemical Corrosion Resistance at a Rate of 1/4 Gallon per Square; Wait at least 3 Hours for Primer to Dry; Strip in Seams, Around Penetrations and Fasteners with a Single-Component, Aliphatic Urethane at a Rate of 2 Gallons per Square / Reinforcement / 1 Gallon per Square (3 Gallons per Square on All Stripped in Areas) USE SEPARATE LINE ITEM; Wait 24-48 Hours; Apply Single-Component, Aliphatic Urethane as a Base Coat at a Rate of 1.5 Gallons per Square and Top Coat at a Rate of 1.0 Gallon per Square Over the Entire Roof According to Manufacturer's Specifications.
RESTORATION OF A METAL ROOF SYSTEM WITH TWO-COMPONENT, LOW-ODER URETHANE Prepare Metal Roof Surface by Scraping, Sanding, Wire Brush or Blasting (USE SEPARATE LINE ITEM FOR BLASTING OR WIRE BRUSHING); Clean with TSP or Simple Green, Apply Primer with Rust Inhibiting and Chemical Corrosion Resistance at a Rate of 1/4 Gallon per Square; Wait at least 3 Hours for Primer to Dry; Strip in Seams, Around Penetrations and Fasteners with a Two-Component, Low-Oder Urethane at a Rate of 2 Gallons per Square / Reinforcement / 1 Gallon per Square (3 Gallons per Square on All Stripped-In Areas) USE SEPARATE LINE ITEM; Wait 24-48 Hours; Apply Two-Component, Low-Oder Urethane as a Base Coat at a Rate of 1.5 Gallons per Square and Top Coat at a Rate of 1.0 Gallon per Square Over the Entire Roof According to Manufacturer's Specifications.
COAT ROOF WITH HIGH PERFORMANCE FLUORPOLYMER PAINT SYSTEM FOR METAL ROOFS Prepare Metal Roof Surface by Scraping, Sanding, Wire Brushing or Blasting (USE SEPARATE LINE ITEM FOR BLASTING & WIRE BRUSHING); Clean with TSP or Simple Green, Prime at a Rate of (Primer 1/4" Gallon per Square); Wait; Install Base Coat and Top Coat at a Rate of 1/4 Gallon per Sq. per Coat According to Manufacturer's Specifications
RESTORATION OF A SINGLE-PLY WITH SINGLE-COMPONENT URETHANE & STRIPPED SEAMS Prepare Roof Surface by Cleaning with TSP or Simple Green, Use Portable Blowers to Clear the Roof Surface of Moisture; Strip in Seams by Applying a Single-Component, Aliphatic Urethane 2 Gallons per Square USE SEPARATE LINE ITEM, Wait 24-48 Hours, Apply Single-Component, Aliphatic Urethane as a Base Coat at a Rate of 1.5 Gallons per Square and Top Coat at a Rate of 1.0 Gallon per Square Over the Entire Roof According to Manufacturer's Specifications.
PREPARE METAL ROOF FOR RESTORATION BY WIRE BRUSHING ROOF SURFACE Wire Brush Metal Roof Surface to Remove Loose Paint, Rust or Expose Bare Metal
PREPARE METAL ROOF FOR RESTORATION BY WIRE BRUSHING METAL ROOF SEAMS Wire Brush Metal Roof Seams to Remove Loose Paint, Rust or Expose Bare Metal
PREPARE METAL ROOF FOR RESTORATION BY SANDBLASTING METAL ROOF Sand-Blast Metal Roof Surface and Seams to Remove Loose Paint, Rust or Expose Bare Metal
RESATURATION OF ASPHALT ROOF SURFACE WITH ASPHALT COATING SYSTEM Wet Vac Roof to Remove Aggregate, Apply Cold Applied Modified Asphalt Flood Coat & New Aggregate - Coating Applied at 6-8 Gallons per Sq. w/ New Gravel According to Manufacturer's Specifications (New Flashings also Required Separate Line Item)
RESATURATION OF ASPHALT OR COAL TAR PITCH BURs WITH COAL-TAR PITCH COATING SYSTEM Wet Vac Roof to Remove Aggregate, Apply Cold Applied Modified Coal Tar Flood Coat & New Aggregate as Specified Applied at 6-8 Gallons per Sq. w/ New Gravel According to Manufacturer's Specifications (New Flashings also Required Refer to Flashing Line Item)