3) Add new subsection 310.15(B)(2)(a), Ambient Temperature in Exposed Attic or Unconditioned Spaces, to read as follows:
310.15(B)(2)(a) Ambient Temperature in Exposed Attic or Unconditioned Spaces. Where NM, NMC, NMS and other
cables, conductors and wiring methods listed in Chapter 3 are installed in an attic that is exposed to outside temperatures, or in unconditioned spaces, the ambient temperature shall be considered to exceed 140°F.
SECTION 1 8
. Section 8.04.065 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
08.04.065 California Energy Code—Adopted.
That certain document, a copy of which is on file with the office of the City Clerk, being marked and designated as the 2022 California Energy Code, California Code of Regulations Title 24, Part 6, including all appendices, tables and indices thereto, is hereby adopted by reference as the Palm Springs Energy Code, pursuant to Section 50022.1 et seq. of the California Government Code.
SECTION 19
. Section 08.04.0 70 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
08.04.070 California Green Building Standards Code—Adopted.
That certain document, a copy of which is on file with the office of the City Clerk, being marked and designated as the 2022 California Green Building Standards Code, California Code of Regulations Title 24, Part 11, including Chapter 1, and all appendices, tables and indices thereto, is hereby adopted by reference as the Palm Springs Green Building Code pursuant to Section 50022.1 et seq. of the California Government Code.
SECTION 20
. A rticle IV of Chapter 8.04 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
08.04.300 (Reserved).
08.04.310 (Reserved).
08.04.320 (Reserved).
8.04.340 Local Appeals Board and Housing Appeals Board.
(a) The City Council shall serve as the Local Appeals Board and the Housing Appeals Board, and the City Council’s authority to hear appeals shall be the same Item 2A - Page 29
Ordinance No. ____
as cited in each of the uniform codes adopted under Chapter 8.04 and as referenced in Section 8.04.005 of this code, and California Health and Safety Code Sections 17920.5 and 17920.6.
(b) Any person aggrieved of any decision of the director of building and safety services, or any decision of any designee of the director, including but not limited to the issuance of a notice of violation or the initiation of any enforcement action pursuant to the provisions of the uniform codes adopted under Chapter 8.04, and as referenced Section 8.04.010 of this code, shall within ten days following the action file a written notice of appeal with the city clerk. The appeal shall set forth the appellant’s full name and mailing address, the specific action appealed from, the grounds for the appeal and the relief sought, and shall include the payment of the appeal fee as established or amended from time to time by resolution of the city council.
SECTION 2 1.
E XEMPTION FROM CALIFORNIA ENVIRONMENTAL
QUALITY ACT. The City Council finds that the amendments to the Municipal Code, made pursuant to this Ordinance, are exempt from the California Environmental Quality Act (“CEQA”) because they do not constitute a project within the meaning of CEQA Section 15378. The amendments herein have no potential for resulting in physical change to the environment, directly or indirectly. The City Council further finds, under Title 14 of the California Code of Regulations, Section 15061(b)(3), that this Ordinance is nonetheless exempt from the requi rements of CEQA in that the activity is covered by the general rule that CEQA applies only to projects which have the potential for causing a significant effect on the environment. These amendments do not allow any new activities, but merely adopt updated language. The City Clerk shall be the custodian of record for the documentation supporting this action. Staff is hereby directed to file a Notice of Exemption within five (5) days of the adoption of this Ordinance.
SECTION 22. OPERATIVE DATE. The provisions of this Ordinance shall become operative on January 1, 20 23, which is the effective date of the 2022 edition of the California Building Standards Codes, enacted by the State of California.
SECTION 23. EFFECTIVE DATE. The Mayor shall sign and the City Clerk shall certify to the passage and adoption of this Ordinance and shall cause the same, or the summary thereof, to be published and posted pursuant to the provisions of law and this Ordinance shall take effect thirty (30) days after passage.
SECTION 2 4. SEVERABILITY. If any section, subsection, clause or phrase of this ordinance is for any reason held by a court of competent jurisdiction to be invalid, such a decision shall not affect the validity of the remaining portions of this ordinance. The City Council of the City of Palm Springs, hereby declares that it would have passed this ordinance and each section of subsection, sentence, clause and phrase thereof, irrespective of the clauses or phrases being declared Item 2A - Page 30
Ordinance No. ____
invalid.
PASSED, APPROVED, AND ADOPTED THIS, ____ DAY OF __________, 2023.
GRACE ELENA GARNER
MAYOR
ATTEST:
BRENDA PREE, MMC
CITY CLERK
Item 2A - Page 31
Ordinance No. ____
CERTIFICATION
STATE OF CALIFORNIA )
COUNTY OF RIVERSIDE ) ss.
CITY OF PALM SPRINGS )
I, BRENDA PREE, City Clerk of the City of Palm Springs, California, do hereby certify that Ordinance No. ____ is a full, true, and correct copy, and was introduced at a regular meeting of the Palm Springs City Council on _________ and adopted at a regular meeting of the City Council held on __________ by the following vote:
AYES:
NOES:
ABSENT:
ABSTAIN:
BRENDA PREE, MMC
CITY CLERK
Item 2A - Page 32
ATTACHMENT #2
Item 2A - Page 33
ORDINANCE NO. _____.
AN ORDINANCE OF THE CITY OF PALM SPRINGS , CALIFORNIA,
AMENDING AND R ESTATING ARTICLE VI OF CHAPTER 8.04 OF THE
PALM SPRINGS MUNICIPAL CODE, ADOPTING BY REFERENCE,
TOGETHER WITH CERTAIN ADDITIONS, AMENDMENTS AND
DELETIONS, THE 2022 CALIFORNIA FIRE CODE, INCLUDING CERTAIN
APPENDICES, AS MANDATED BY CALIFORNIA HEALTH AND SAFETY CODE SECTION 18938 AND DETERMINING THE ORDINANCE TO BE
EXEMPT FROM CEQA.
CITY ATTORNEY SUMMARY
This Ordinance adopts and amends the 2022 California Fire Code, California Code of Regulations , Title 24, Part 9, adopted by the State of California and effective on January 1 , 2023, including Appendi x B with amendments. In addition, this Ordinance adds Appendices P (Palm Springs Fire Department Five Minute Response Time Map), Q (Palm Springs Very High Fire Hazard Severity Zones Map in LRA As Recommended by Cal Fire), S (Vegetation Management in Very High Fire Hazard Severity Zones), and T (Palm Springs Fire Department Development Requi rements) to the Fire Code.
WHEREAS, pursuant to Government Code section 50022.1 et seq., the City of Palm Springs (“City”) may adopt by reference the California Building Standards Code, 2022 Edition as provided in Title 24, Part 9, of the California Code of Regulations, also known as the California Fire Code; and
WHEREAS, on January 1, 2023, the California Building Standards Commission (“Commission”) will adopt the 2022 Edition of the California Fire Code; and
WHEREAS, the City Council ha s determined enforcement of the most current editions of the California Fire Code with local amendments thereof, as recited herein as certain minimum standards are necessary for the protection of the public health, safety and welfare of citizens of Palm Springs; and,
WHEREAS, the adoption of the California Fire Code in their most current editions is exempt from the California Environmental Quality Act (CEQA) pursuant to Section 15308 of the State CEQA Guidelines; and
WHEREAS, pursuant to Health and Safety Code Sections 17958.5 and 17958.7 a City may make such modifications in the requirements of the regulations, adopted pursuant to Health and Safety Code Section 17922, as it determines to be reasonably necessary because of local climatic, geological or topographic conditions; and
Item 2A - Page 34
Ordinance No.____
WHEREAS, the City’s unique climatic, geological and topographical conditions make it reasonably necessary for the City to enact amendments to the adoption of the 2022 California Fire Code; and
WHEREAS, the City’s Fire Chief has recommended that changes and modifications be made to the California Fire Code, and have advised that certain changes and modifications to said Code are reasonably necessary due to local conditions within the City, and have further advised that the remainder of the said changes and modifications are of an administrative or procedural nature, or concern themselves with subjects not covered by the Code, or are reasonably necessary to safeguard life and property within the City; and
WHEREAS, the City’s Fire C hief has also recommended that changes and modifications be made to the California Fire Code, which are necessary for administrative clarification and to establish administrative standards for the effective enforcement of the building standards of the City and do not modify a building standard pursuant to California Health & Safety Code Sections 17958, 17958.7, and/or 18941.5; and
WHEREAS, the City held a public hearing on January 12, 2023, at which time all interested persons had the opportunity to appear and be heard on the matter of adopting the Codes as amended herein; and
WHEREAS, the City published notice of the aforementioned public hearing pursuant to California Government Code Section 6066 on December 5, 2022 and January 12, 2023; and
WHEREAS, any and all other legal prerequisites relating to the adoption of this Ordinance have occurred.
THE CITY COUNCIL OF THE CITY OF PALM SPRINGS DOES HEREBY ORDAIN AS FOLLOWS:
SECTION 1
. FINDINGS. The City Council of the City of Palm Springs (“City”) is informed and finds that it is reasonably necessary to amend certain portions of the 2022 California Fire Code, California Code of Regulations Title 24, Part 9, to meet the particular climatic, geological and topographical conditions existing in the City. The City Council further finds that some changes and modifications are of an administrative or procedural nature, or concern themselves with subjects not covered by the Code, or are reasonably necessary to safeguard life and property within the City. The City Council hereby adopts the following (climatic, geological, and topographical, where applicable) findings to support the proposed amendments to the 2022 California Fire Code made herein in this Ordinance:
A. Climatic Conditions
: Palm Springs has an arid desert climate with annual rainfall of is less than 6 inches. There are more than one hundred days a year when temperatures are 100 degrees or more. Hot, dry winds during the summer months along with Item 2A - Page 35
Ordinance No.____
seasonal Santa Ana winds are common to Palm Springs. These winds constitute a contributing factor which causes small fires originating in high density developments presently being constructed in Palm Springs, which spread quickly and create the need for an increased level of fire protection. This added protection, including, but not limited to, on- site fire protection systems, will supplement normal fire department response available in new development and provide immediate fire protection for life and safety of occupied single and multiple-occupancy buildings during fire occurrence;
B. Geological and Topographical Conditions:
1. Palm Springs is located in the desert that contains mountains, brush, and covered wild lands. Elevation ranges from 479 feet in the central business district 4,000 feet in the mountains in the most Southern boundaries of the city limits. Topography extends from flat to 15% slope for habitable land. Traffic and circulation congestion in the urban areas to buildings located in the commercial areas in the most Northern and Eastern boundaries of the city limits often place fire department response time to emergencies at risk. This condition makes the need for enhanced on- site fire protection systems for property occupants necessary; and
2. The San Andreas Fault is a major earthquake fault located in close proximity to the City of Palm Springs. In addition, there are numerous minor faults located throughout Riverside County which are subject to earthquakes. In addition, Palm Springs is also subject to high wind conditions, blowing sand, flooding, landslides and wildfires. The placement of existing and new development buildings along with fire department staffing constraints have made it difficult for the fire department to locate additional fire stations. These constraints challenge current staffing to concentrate fire companies and personnel to control fires in single and multi -story retail buildings, commercial, and industrial buildings, making enhanced, built-in fire protection systems necessary.
Amendments to the 2022 Ed ition of the California Fire Code provisions listed below are determined to be reasonably necessary based on the climatic, geological, and/or topographical conditions presented in this Ordinance and as referenced in the following table:
Fire Code Section
Findings
202 Climatic, Geological and Topographical #2
304.1.2 Climatic, Geological and Topographical #1
305.6 Climatic, Geological and Topographical #1
305.7 Climatic, Geological and Topographical #1
307.6 Climatic, Geological and Topographical #1
307.6.1 Climatic, Geological and Topographical #1
307.6.2 Climatic, Geological and Topographical #1
307.6.2.1 Climatic, Geological and Topographical #1
308.1.6.3 Climatic, Geological and Topographical #1
Item 2A - Page 36
Ordinance No.____
321 Climatic, Geological and Topographical #1
322 Climatic, Geological and Topographical #1
323 Climatic, Geological and Topographical #1
324.1 – 325.3 Climatic, Geological and Topographical #1 407.5 Climatic, Geological and Topographical #2
501.1 Climatic, Geological and Topographical #2
503.1.1.1, 503.2.3, 503.2.4, 503.2.5,
503.2.9, 503.2.10, 503.2.11, 503.6
Climatic
506.3 Climatic, Geological and Topographical #2
901.6.1.1 Geological and Topographical #2
903.2, 903.2.1.1, 903.2.1.2,
903.2.1.3, 903.2.1.4, 903.2.1.5,
903.2.3, 903.2.4, 903.2.7, 903.2.9,
903.2.9.1, 903.2.10, 903.2.10.1,
903.2.21, 903.2.22, 903.3.9, 903.6.1
Climatic, Geological and Topographical #2
907.2.12, 907.2.18 Climatic, Geological and Topographical #2 914.2.1, 914.3.1 Climatic, Geological and Topographical #2 1103.11 Climatic, Geological and Topographical #1
1201.1.1 Climatic, Geological and Topographical #2
4906.3 Climatic, Geological and Topographical #1
4908 Climatic, Geological and Topographical #1
5001.5.2 Climatic, Geological and Topographical #2
5003.1.1.1 Climatic, Geological and Topographical #2
5608.2 Climatic, Geological and Topographical #2
5608.3 Climatic, Geological and Topographical #2
5614 Geological and Topographical #1
5615 Climatic
5704.2.11.1 Climatic
Appendix B101.1 Climatic, Geological and Topographical #2 Appendix P Climatic, Geological and Topographical #2
Appendix Q Climatic, Geological and Topographical #2
Appendix S Climatic, Geological and Topographical #2
Appendix T Climatic, Geological and Topographical #2
Amendments not listed in the table are administrative standards for the effective enforcement of building standards in the City. They are necessary for adminis trative clarification, and do not modify a building standard pursuant to California Health & Safety Code Sections 17958, 17958.7 and/or 18941.5.
Article VI of Chapter 8.04 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
ARTICLE VI
FIRE CODE
Section:
Item 2A - Page 37
Ordinance No.____
8.04.500 California Fire Code—Adopted.
8.04.510 California Fire Code—Additions, Amendments and Deletions.
SECTION 2. Section 8.04.500 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
8.04.500 California Fire Code—Adopted.
That certain document, a copy of which is on file in the office of the City Clerk, being marked and designated as the 20 22 California Fire Code, California Code of Regulations Title 24, Part 9, including Appendices B, P, Q, S, and T except as hereinafter modified, are hereby adopted by reference as the Fire Code of the City of Palm Springs pursuant to Government Code Section 50022.1 et seq.
SECTION 3
. Section 8.04.510 of the Palm Springs Municipal Code is hereby amended and restated to read as follows:
8.04.510 California Fire Code—Additions, Amendments and Deletions.
The California Fire Code adopted herein by reference is hereby modified by the following additions, amendments and deletions:
1) Chapter 1 General Requirements. Adopt Chapter 1 in its entirety, with the exception of Section 109, and with the following amendments:
2) Amend Chapter 1, Division II Administration, subsection 101.1, Title, to read as follows:
101.1 Title. These regulations shall be known as the Fire Code of Palm Springs, hereinafter referred to as “this code”.
3) Amend subsection 101.4, Severability, to read as follows:
101.4 Severability. If any section, subsection, paragraph, sentence, clause or phrase of this ordinance is for any reason held to be invalid or unconstitutional, such invalidity or unconstitutionality shall not affect the validity or constitutionality of the remaining portions of this ordinance, it being expressly declared that this ordinance and each section, subsection, paragraph, sentence, clause and phrase thereof would have been adopted, irrespective of the fact that one or more other section, subsection, paragraph, sentence, clause or phrase be declared invalid or unconstitutional.
4) Amend subsection 103.4. Liability, to read as follows:
Item 2A - Page 38
Ordinance No.____
104.7 Liability. Any liability against the Palm Springs Fire Department or any officer or employee shall be as provided for in California Government Code and case law. Fire suppression, investigation and rescue or emergency medical costs are recoverable in accordance with California Health and Safety Code Sections 13009 and 13009.1.
5) Amend subsection 110.4, Violation penalties, to read as follows:
110.4 Violation penalties. The provisions of Title 1 of the Palm Springs Municipal Code shall be applicable to and govern the enforcement of this Title. Each day that a violation continues after due notice has been served shall be deemed a separate offense. The imposition of one (1) penalty for one (1) violation shall not excuse the violation, or permit it to continue. All such persons shall be required to correct or remedy such violations or defects within a reasonable time. The application of the above penalty shall not be held to prevent the enforced removal or correction of prohibited conditions.
6) Add section 110.5., Infraction and misdemeanor, to read as follows:
110.5 Infraction and misdemeanor. Persons operating or maintaining any occupancy, premises or vehicle subject to this code that shall permit any fire or life safety hazard to exist on premises under their control shall be guilty of an infraction.
Persons who fail to take immediate action to abate a fire or life safety hazard when ordered or notified to do so by the chief or a duly authorized representative are guilty of a misdemeanor.
7) Amend subsection 112.4, Failure to comply, to read as follows:
112.4 Failure to comply. Any person who shall continue any work after having been served with a stop work order, except such work as that person is directed to perform to remove a violation or unsafe condition, shall be in violation of this code.
8) Chapter 2 Definitions is adopted in its entirety with the following amendments:
9) A mend Section 202, General Definitions, by adding the following definitions:
FIVE MINUTE FIRE DEPARTMENT RESPONSE TIME . The Five -Minute Fire Department Response Time is defined as the time the fire station or response personnel receive notification of a call for emergency service, allowing one-minute for “firefighter turnout” and four -minutes for travel on paved streets. The Palm Springs Fire Department Five-Minute Response Time Map is identified in Appendix P.
PSFD. Palm Springs Fire Department, fire authority having jurisdiction.
Item 2A - Page 39
Ordinance No.____
SPARK ARRESTER. A listed device constructed of noncombustible material specifically for the purpose of meeting one of the following conditions:
1. Removing and retaining carbon and other flammable particles/debris from the exhaust flow of an internal combustion engine in accordance with California Vehicle Code Section 38366.
2. Fireplaces that bum solid fuel in accordance with California Building Code Chapter 28.
10) Chapter 3 General Requirements. Adopt Chapter 3 in its entirety, with the exception of Sections 308.1.4, 311.5 through 311.5.5, 318, and 319, and with the following amendments:
11) Amend subsection 304.1.2, Vegetation, to read as follows:
304.1.2 Vegetation. Weeds, grass, vines or other growth, as determined by the Fire Code Official, that is capable of being ignited and endangering property, shall be cut down and removed by the owner or occupant of the premises. Vegetation clearance requirement in urban- wildland interface areas shall be in accordance with Chapter 49. Type, amount, arrangement, and maintenance of vegetation in a fuel modification area, interior slope, or similarly hazardous area shall be in accordance with PSFD Appendix S “ Vegetation Management in Very High Fire Hazard Severity Zones.”
12) Add new subsection 305.6, Hazardous Conditions, to read as follows:
305.6 Hazardous conditions. Outdoor fires burning wood or other solid fuel are not allowed when any of the following conditions applies:
1. When predicted sustained winds exceeds 8 MPH and relative humidity is less than 25% or a red flag condition has been declared.
2. When an official sign was caused to be posted by the Fire Code Official, or a public announcement is made.
3. No outdoor fires using any fuel type are permitted when predicted sustained winds exceed 20 MPH or when such fires present a hazard as determined by the Fire Code Official.
13) Add new subsection 305.7, Disposal of rubbish, to read as follows:
305.7 Disposal of rubbish . Rubbish, trash or combustible waste material shall be burned only within an approved incinerator and in accordance with Section 307.2.1.
Item 2A - Page 40
Ordinance No.____
14) Amend title of section 307, Open burning, recreational fires and portable outdoor fireplaces, to read as follows:
SECTION 307.1.1 OPEN BURNING, RECREATIONAL FIRES, FIRE PITS, FIRE
RINGS, AND PORTABLE OUTDOOR FIREPLACES
15) Add new subsection 307.6, Outdoor fireplaces, fire pits, fire rings, or similar devices used at R occupancies, to read as follows:
307.6 Outdoor Fireplaces, Fire P its, Fire Rings, or similar devices used at Group R Occupancies. Outdoor fireplaces, fire pits, fire rings, or similar exterior devices used at Group R occupancies shall comply with this section.
Exception: Barbeques grills and other portable devices intended solely for cooking.
16) Add new subsection 307.6.1, Gas-fueled devices, to read as follows:
307.6.1 Gas-fueled devices. Outdoor fireplaces, fire pits and similar devices fueled by natural gas or liquefied- petroleum gas are allowed when approved by the Building Department and the device is designed to only burn a gas flame and not wood or other solid fuel. At R -3 occupancies, combustible construction and vegetation shall not be located within three feet of an atmospheric column that extends vertically from the perimeter of the device. At other R occupancies, the minimum distance shall be ten feet. Where a permanent Building Department approved hood and vent is installed, combustible construction may encroach upon this column between the bottom of the hood and the vent opening. Where chimneys or vents are installed, they shall have a spark arrester as defined in Section 202.
17) Add new subsection 307.6.2, Devices using wood or fuels other than natural gas or liquefied petroleum gas, to read as follows:
307.
6.2 Devices using wood or fuels other than natural gas or liquefied - pe
troleum gas. Permanent outdoor fireplaces burning wood or other solid fuel shall be constructed in accordance with the California Building Code with clearance from combustible construction and building openings as required therein. Fires in a fireplace shall be contained within a firebox with an attached chimney. The opening in the face of the firebox shall have an installed and maintained method of arresting sparks.
T
he burning of wood or other solid fuel in a device is not allowed within 25 feet of combustible structures unless within an approved permanent fireplace. Conditions which could cause a fire to spread within 25 feet of a structure or to vegetation shall be eliminated prior to ignition. Fires in devices burning wood or solid fuel shall be in accordance with Sections 305. 307. and 308.
Item 2A - Page 41
Ordinance No.____
Exceptions:
1. Portable fireplaces and fire rings/pits equipped with a device to arrest sparks shall be located at least 3' from combustible construction at R-3 occupancies.
2. Portable fireplaces and fire pits/rings equipped with a device to arrest sparks shall be located at least 15 feet from combustible structures at other R occupancies.
18) Add new subsection 307.6.2.1, Where prohibited, to read as follows:
307.6.2.1 Where prohibited. The burning of wood and other solid fuels shall not be conducted within a fuel modification zone. Wildfire Risk Area (WRA), Wildland Urban Interface Area (WUI), or in locations where conditions could cause the spread of fire to the WRA or WUI.
Exceptions:
1. Permanent fireplaces that are not located in a fuel modification zone
2. Where determined by the Fire Code Official that the location or design of the device should reasonably prevent the start of a wildfire.
19) Delete subsection 308.1.4, Open-flame cooking devices.
20) Amend subsection 308.1.6.3, Sky lanterns, to read as follows:
308.1.6.3 Sky lanterns. A person shall not release, or cause to be released a sky lantern.
21) Delete subsection 311.5, Placards, in its entirety.
22) Delete section 318, Laundry carts, in its entirety.
23) Delete section 319, Mobile food preparation vehicles, in its entirety.
24) Add new section 321, Fuel modification requirements for new construction, to read as follows:
Section 321 Fuel modification requirements for new construction
321.1 Fuel modification requirements for new construction. All new structures and facilities adjoining land containing hazardous combustible vegetation shall be approved and in accordance with the requirements of PSFD Appendix S “Vegetation Management in Very High Fire Hazard Severity Zones.”
25) Add new section 322, Clearance of brush or vegetation growth from roadways, to read as follows:
Item 2A - Page 42
Ordinance No.____
Section 322 Clearance of brush or vegetation growth from roadways
322.1 Clearance of brush or vegetation growth from roadways. The Fire Code Official is authorized to cause areas within 10 feet (3048 mm) on each side of portions of highways and private streets which are improved, designed or ordinarily used for vehicular traffic to be cleared of flammable vegetation and other combustible growth. Measurement shall be from the flowline or the end of the improved edge of the roadway surfaces.
Exception: Single specimens of trees, ornamental shrubbery or cultivated ground cover such as green grass, ivy, succulents or similar plants used as ground covers, provided that they do not form a means of readily transmitting fire.
26) Add new section 323, Unusual circumstances, to read as follows:
Section 323 Unusual circumstances
323.1 Unusual circumstances. The Fire Code Official may suspend enforcement of the vegetation management requirements and require reasonable alternative measures designed to advance the purpose of this code if determined that in any specific case that any of the following conditions exist:
1. Difficult terrain.
2. Danger of erosion.
3. Presence of plants included in any state and federal resources agencies, California Native Plant Society and county approved list of wildlife, plants. Rare, endangered and/or threatened species.
4. Stands or groves of trees or heritage trees.
5. Other unusual circumstances that make strict compliance with the clearance of vegetation provisions undesirable or impractical.
27) Add new section 324, Use of equipment, to read as follows:
Section 324 Use of equipment
324.1 Use of equipment. Except as otherwise provided in this section, no person shall use, operate, or cause to be operated in, upon or adjoining any hazardous fire area any internal combustion engine which uses hydrocarbon fuels, unless the engine is equipped with a spark arrester as defined in Section 202 maintained in effective working order, or the engine is constructed, equipped and maintained for the prevention of fire.
Exceptions:
1. Engines used to provide motor power for trucks , truck tractors, buses, and passenger vehicles, except motorcycles, are not subject to this section if the Item 2A - Page 43
Ordinance No.____
exhaust system is equipped with a muffler as defined in the Vehicle Code of the State of California.
2. Turbocharged engines are not subject to this section if all exhausted gases pass through the rotating turbine wheel, there is no exhaust bypass to the atmosphere, and the turbocharger is in good mechanical condition.
28) Add new subsection 324.2, Use of equipment and devices generating heat, sparks or open flames, to read as follows:
324.2 Equipment and devices generating heat, sparks or open flames. During any time of the year within Wildfire Risk Areas , within or immediately adjacent to any forest or brush covered land, or non-irrigated grass covered land, no person shall use or operate any welding equipment , cutting torches , tar pots , grinding devices, or other tools or equipment that may produce a spar k, fire, or flame that could result in a wildfire without doing the following:
1. First clearing away all flammable material, including snags, from the area around such operation for a distance of 30 feet or other approved method to reduce fire spread int o the wildlands. If 30-foot clearing cannot be achieved , then an alternate method shall be approved by the Fire Code Official prior to work starting.
2. Maintain one serviceable round point shovel with an overall length of not less than forty-six (46) inches and one backpack pump water-type fire extinguisher fully equipped and ready for use at the immediate area during the operation.
3. Stop work when winds are 8 MPH or greater during periods when relative humidity is less than 25% , or a red flag condition has been declared or public announcement is made, when an official sign was caused to be posted by the Fire Code Official, or when such fires present a hazard as determined by the Fire Code Official.
4. Keep a cell phone nearby and call 911 immediate in case of fire.
29) Add new subsection 324.3, Spark arresters, to read as follows:
324.3 Spark arresters. Spark arresters shall comply with Section 202, and when affixed to the exhaust system of engines or vehicles subject to Section 324 shall not be placed or mounted in such a manner as to allow flames or heat from the exhaust system to ignite any flammable material.
30) Add new section 325, Parade floats, to read as follows:
Section 325 Parade floats
325.1 Decorative materials. Decorative materials on parade floats shall be non- combustible or flame retardant.
Item 2A - Page 44
Ordinance No.____
325.1.1 Combustible Clearance. A 12” minimum clearance of decorative materials shall be maintained around vehicle and/or generator exhaust pipe(s).
325.2 Fire Protection. Motorized parade floats and towing apparatus shall be provided with a minimum 2A 10B:C rated portable fire extinguisher readily accessible to the operator.
325.3 Portable Generators. Portable generators shall be secured from tipping and subject to approval by the Fire Code Official.
31) Chapter 4: Emergency Planning and Preparedness. Adopt only the sections , subsections, and amendment listed below:
32) Adopt only the following sections and subsections in Chapter 4, Emergency planning and preparedness:
401-401.9
402
403.2
403.5-403.5.4
403.10.2.1.1
403.13.3
407
33) Amend subsection 407.5, Hazardous materials inventory statement, to read as follows:
407.5 Hazardous Materials Inventory Statement . Where required by the Fire Code Official, each application for a permit shall include a Hazardous Materials Inventory Statement, PSFD’s Chemical Classification Packet in accordance with Section 5001.5.2.
34) Chapter 5 Fire Service Features is adopted in its entirety with the following amendments:
35) Amend subsection 501.1, Scope, to read as follows:
501.1 Scope. Fire service f eatures for buildings, structures and premises shall comply with this chapter and, where required by the Fire Code Official, with PSFD Appendix S “Vegetation Management in Very High Fire Hazard Severity Zones.”
36) Add new subsection 503.1.1.1, Gates, to read as follows:
503.1.1. Gates. When fences are installed that cause the distance from an approved fire department access road to exceed the maximum distance allowed Item 2A - Page 45
Ordinance No.____
in Section 503 herein, a gate shall be provided in the fence to maintain the required fire department access. The gate shall be a minimum four (4) feet in width.
37) Amend subsection 503.2.3, Surface, to read as follows:
503.2.3 Surface. Fire apparatus access roads shall be designed and maintained to support the imposed loads of fire apparatus (73,000 lbs. Gross Vehicle Weight) and shall be surfaced so as to provide all-weather driving capabilities.
38) Amend subsection 503.2.4, Turning radius, to read as follows:
503.4 Turning radius. The required turning radius of a fire apparatus access road shall be determined by the Fire Code Official. Fire access road turns and corners shall be designed with a minimum inner radius of 25 feet and an outer radius of 43 feet.
39) Amend subsection 503.2.5, Dead ends, to read as follows:
503.5 Dead ends. Dead-end fire apparatus roads in excess of 150 feet in length shall be provided with an approved area for turning around fire apparatus. The City of Palm Springs has two approved turn around provisions. One is a cul-de-sac with an outside turning radius of 43 feet from centerline. The other is a hammerhead turnaround meeting the Palm Springs Public Works and Engineering Department standard dated 8-3-16.
40) Add new subsection 503.2.9, Aerial fire access roads, to read as follows:
503.2.9 Aerial fire access roads. Buildings or portions of buildings or facilities exceeding 30 feet in height above the lowest level of fire department vehicle access shall be provided with approved fire apparatus access roads capable of accommodating fire department aerial apparatus. Overhead utility and power lines shall not be located within the aerial fire apparatus access roadway.
41) Add new subsection 503.2.10, Width, to read as follows:
503.2.10 Width. Fire apparatus access roads shall have a minimum unobstructed width of 26 feet in the immediate vicinity of any building or portion of building more than 30 feet in height.
42) Add new subsection 503.2.11, Proximity to building, to read as follows:
503.2.11 Proximity to building. At least one of the required access routes for buildings or facility exceeding 30 feet in height above the lowest level of fire department vehicle access shall be located within a minimum of 15 feet and a maximum of 30 feet from the building and shall be positioned parallel to one entire side of the building.
Item 2A - Page 46
Ordinance No.____
43) Amend subsection 503.6, Security gates, to read as follows:
503.6 Security gates. Secured automated vehicle gates new and existing shall utilize a combination of a Tomar Str obeswitch™, or approved equal, and an approved Knox key electric switch when required by the Fire Code Official.
Secured non-automated vehicle gates or entries shall utilize an approved padlock or chain (maximum link or lock shackle size of ¼ inch) when required by the Fire Code Official.
Gate arms securing parking lots and parking structures shall be equipped with a fire department approved dual-keyed Knox key electric switch. When activated, the arm or arms shall open to allow fire and law enforcement access.
Approved security gates shall be a minimum of 14 feet in unobstructed drive width on each side with gate in open position.
In the event of a power failure, the gates shall be defaulted or automatically transferred to a fail safe mode allowing the gate to be pushed open without the use of special knowledge or any equipment. If a two-gate system is used, the override switch must open both gates.
If there is no sensing device that will automatically open the gates for exiting, a fire department approved Knox electrical override switch shall be placed on each side of the gate in an approved location.
A final field inspection by the Fire Code Official or an authorized representative is required before electronically controlled gates may become operative. Prior to final inspection, electronic gates shall remain in a locked-open position.
44) Add new subsection 506.3, Height, to read as follows:
506.3 Height. The nominal height of Knox lock box installations shall be 5 feet above grade.
45) Adopt Chapter 6 Building Services and Systems, Chapter 7 Fire and Smoke Protection Features and Chapter 8 Interior Finish, Decorative Materials and Furnishings in their entirety without amendments.
46) Adopt Chapter 9 Fire Protection and Life Safety Systems is adopted in its entirety with the following amendments:
47) Add new subsection 901.6.1.1, Approval required, to read as follows:
901.6.1.1 Approval required. Prior to the removal of any fire protection system, approval shall be obtained from the Fire Code Official.
Item 2A - Page 47
Ordinance No.____
48) Amend subsection 903.2, Where required, to read as follows:
903.2 Where required. Approved automatic sprinkler systems in new buildings and structures shall be provided in locations described in Sections 903.2.1 through 903.2.21 as amended by this code. For purposes of this code, subsections regarding building size and fire resistive construction shall not be considered for purposes of reducing the gross fire area of that building.
Exceptions: (1) Group U Occupancies of non- combustible construction; and (2) Group S -2 carports – 100% open on all sides of non- combustible construction.
An approved automatic fire sprinkler system shall be installed in any building, regardless of gross fire area, which is built beyond a five- minute fire department emergency response time as defined in Section 202.
Exceptions: (1) Group U Occupancies of non- combustible construction; and (2) Group S-2 carports – 100% open on all sides of non- combustible construction.
An approved automatic fire sprinkler system shall be installed in every Group A Occupancy per 903.2.1 including those that result from a change of use in an existing building or portion thereof.
Exception: Group A-2 occupancies.
49) Delete subsection 903.2.1.1 Group A-1.
50) Amend subsection 903.2.1.2, Group A-2, to read as follows:
903.2.1.2, Group A-2. An automatic sprinkler system shall be provided for Group A-2 occupancies where one of the following conditions exist:
1. The fully enclosed area exceeds 3,000 square feet. For the purposes of this section, the term “fully enclosed area” means an area enclosed by fi re walls, fire barriers, or walls extending from floor to ceiling but does not include patio areas included solely within the horizontal projection of the roof or floor next above.
2. The fire area exceeds 5,000 square feet.
3. The fire area has an occupant load of 100 or more.
4. The fire area is located on a floor other than a level of exit discharge serving such occupancies.
Item 2A - Page 48
Ordinance No.____
5. The structure exceeds 5,000 square feet, contains more than one fire area containing a Group A -2 occupancy, and is separated into two or more buildings by fire walls of less than four -hour resistance rating without openings.
51) Delete subsection 903.2.1.3 Group A-3
52) Delete subsection 903.2.1.4 Group A-4
53) Delete subsection 903.2.1.5 Group A-5
54) Amend item 1 of subsection 903.2.3, Group E, to read as follows:
1. Throughout all Group E fire areas greater than 3,000 square feet in area.
55) Amend the exception to item 2 of subsection 903.2.3 Group E, to read as follows:
Exception: An automatic sprinkler system is not required in any fire area or area below the level of exit discharge where every classroom throughout the building has at least one exterior exit door at ground level and the fire area does not exceed 3,000 square feet.
56) Amend items 1 and 3 of subsection 903.2.4, Group F-1, to read as follows:
1. Where a Group F-1 fire area exceeds 3,000 square feet.
3. Where the combined area of all Group F-1 fire areas on all floors, including any mezzanines, exceeds 3,000 square feet.
57) Amend items 1, 3, 4 and 5 of subsection 903.2.7, Group M, to read as follows:
1. Where a Group M fire area exceeds 3,000 square feet.
3. Where the combined area of all Group M fire areas on all floors, including any mezzanines, exceeds 3,000 square feet.
4. A Group M occupancy used for the display and sale of upholstered furniture and mattresses exceeds 3,000 square feet.
5. The structure exceeds 3,000 square feet, contains more than one fire area containing a group M occupancy and is separated into two or more buildings by fire walls of less than 4-hour fire-resistance rating.
58) Amend items 1, 3 and 4 of subsection 903.2.9, Group S-1, to read as follows:
1. A Group S-1 fire area exceeds 3,000 square feet.
Item 2A - Page 49
Ordinance No.____
3. The combined area of all Group S -1 fire areas on all floors, including any mezzanines, exceeds 3,000 square feet.
4. A Group S-1 fire area used for the storage of commercial trucks or buses where the fire area exceeds 3,000 square feet.
59) Amend items 1, 2 and 4 of subsection 903.2.9.1, Repair garages, to read as follows:
1. Buildings two or more stories in height, including basements, with a fire area containing a repair garage exceeding 3,000 square feet.
2. One-story buildings with a fire area containing a repair garage exceeding 3,000 square feet.
4. A Group S -1 fire area used for the repair of commercial trucks or buses where the fire area exceeds 3,000 square feet.
60) Amend subsection 903.2.10, Group S-2 enclosed parking garages, to read as follows:
903.2.10 Group S-2 enclosed parking garages. An automatic sprinkler system shall be provided throughout all buildings containing a Group S -2 occupancy, as classified in accordance with section 406.6 of the California Building Code, where one of the following conditions exists:
1. A Group S-2 fire area exceeds 3,000 square feet; or
Exception: Group S -2 carports – 100% open on all sides of non- combustible construction.
2. Where the enclosed parking garage is located beneath other groups.
61) Amend subsection 903.2.10.1, Commercial parking garages, to read as follows:
903.2.10.1 Commercial parking garages. An automatic sprinkler system shall be provided throughout buildings used for storage of commercial trucks or buses where the fire area of the enclosed parking garage exceeds 3,000 square feet.
62) Add new subsection 903.2.21, Group B, to read as follows.
903.2.21 Group B. An automatic sprinkler system shall be provided throughout all new buildings containing a Group B occupancy that exceeds 3,000 square feet.
63) Add new subsection 903.2.22, Group F-2, to read as follows:
Item 2A - Page 50
Ordinance No.____
903.2.22 Group F-2. An automatic sprinkler system shall be provided throughout all new buildings containing a Group F -2 occupancy that exceeds 3,000 square feet.
64) Amend subsection 903.3.9, Floor control valves, to read as follows:
903.3.9 Floor control valves. Approved supervised indicating control valves, check valves, water flow detection assemblies and main drains shall be provided at the point of connection to the riser on each floor in buildings three or more stories in height unless otherwise approved by the Fire Code Official. Valve locations will be determined and approved by the Fire Code Official.
65) Add new subsection 903.6.1, Increased square footage, to read as follows:
903.6.1 Increased square footage. Any existing building or structure undergoing construction or alteration which adds square footage exceeding the total floor area as prescribed in Section 903.2, shall require an approved automatic fire sprinkler system.
Exceptions: (1) One and two- family dwellings and manufactured homes; and (2) additions to occupancies equating to fifty (50) percent or less of total floor area. Fire sprinkler requirements for these occupancies shall be determined based on California Fire Code Table B105.1 – Minimum Required Fire Flow for Buildings.
66) Amend subsection 907.2.12, High-rise buildings, to read as follows:
907.2.12 High-rise buildings. High-rise buildings and buildings having occupied floors located more than 60 feet above the lowest level of fire department vehicle access shall be provided with an automatic smoke detection system in accordance with 907.2.12.1 and emergency voice/alarm communication systems in accordance with Section 907.5.2.2.
67) Amend subsection 907.2.18, Deep Underground buildings, to read as follows:
907.2.18 Deep underground buildings. All underground buildings shall be equipped throughout with a manual fire alarm system, including an emergency voice/alarm communication system installed in accordance with section 907.5.2.2.
68) Delete “Exception” to subsection 914.2.1, Automatic sprinkler system.
69) Delete “Exception” to subsection 914.3.1 Automatic sprinkler system.
70) Adopt Chapter 10 Means of Egress in its entirety without amendments.
Item 2A - Page 51
Ordinance No.____
71) Chapter 11 Construction Requirements for Existing Buildings. Adopt only those sections and subsections listed below and with the following amendments:
72) Adopt only those sections and subsections as listed below and with the following amendments in Chapter 11, Construction requirements for existing buildings:
1103.7
1103.7.3
1103.7.3.1
1103.7.8 - 1103.7.8.2
1103.7.9- 1103.7.9.10
1103.8 - 1103.8.5.3
1103.9.1
1107
1113
1114
1115
1116
73) Add new subsection 1103.11, Increased hazard class in change of use, to read as follows:
1103.11 Increased Hazard Class in Change of Use. An approved fire alarm system shall be installed in existing, non- sprinklered buildings when a change of use occurs resulting in a higher hazard classification.
74) Chapter 12 Energy Systems is adopted in its entirety with the following amendment added:
75) Add new subsection 1201.1.1, Other systems, to read as follows:
1201.1.1 Other Systems. Where required by the Fire Code Official, other systems and operations including but not limited to battery systems assembly, battery reconditioning and storage, research and development of battery storage systems, electric vehicle manufacturing and testing, and battery charging systems for cars and carts inside of buildings or structures, shall comply with this chapter.
Exception: When approved by the Fire Code Official, charging stations for electric vehicles located in open parking garages of Type I or II construction.
76) Adopt Chapter 20 Aviation Facilities , Chapter 21 Dry Cleaning, Chapter 22 Combustible Dust-Producing Operations, Chapter 23 Motor Fuel-Dispensing Facilities and Repair Garages, Chapter 24 Flammable Finishes, Chapter 25 Fruit and Crop Ripening, Chapter 26 Fumigation and Insecticidal Fogging, Chapter 27 Semiconductor Fabrication Facilities, Chapter 29 Manufacture of Organic Coatings , Chapter 30 Industrial Ovens, Chapter 31 Temporary Item 2A - Page 52
Ordinance No.____
Special Event Structures and Other Membrane Structures, Chapter 32 High- Piled Combustible Storage, Chapter 33 Fire Safety During Construction and Demolition, Chapter 34 Tire Rebuilding and Tire Storage, Chapter 35 Welding and Other Hot Work, Chapter 36 Marinas, Chapter 37 Combustible Fibers, Chapter 39 Processing and Extraction Facilities, and Chapter 48 Motion Picture and Television Production Studio Sound Stages, Approved Production Facilities and Production Locations in their entirety without amendments.
77) Chapter 28 Lumber Yards and Agro -Industrial, Solid Biomass and Woodworking Facilities is adopted in its entirety with the following amendment listed below:
78) Amend subsection 2801.2, Permit, to read as follows:
2801.2 Permit . Permits shall be required as set forth in Section 105.6 and 105.6.29.
79) Chapter 49 Requirements for Wildland-Urban Interface Fire Areas is adopted in its entirety with the following amendments:
80) Amend subsection 4906.3, Requirements, to read as follows:
4906.3 Requirements. Hazardous vegetation and fuels around all applicable buildings and structure shall be maintained in accordance with the following laws and regulations:
1. Public Resources Code, Section 4291.
2. California Code of Regulations, Title 14, Division 1.5, Chapter 7,Subchapter 3, Section 1299 (see guidance for implementation "General Guideline to Create Defensible Space”).
3. California Government Code, Section 51182.
4. C alifornia Code of Regulations, Title 19, Division 1, Chapter 7, Subchapter 1, Section 3.07.
5. PSFD’s Appendix S (Vegetation Management in Very High Fire Hazard Severity Zones).
81) Add new section 4908, Fuel Modification Requirements for New Construction to read as follows:
SECTION 4908 FUEL MODIFICATION REQUIREMENTS FOR NEW
CONSTRUCTION
4908.1 Fuel Modification Requirements for New Construction. All new buildings to be built or installed in a Wildfire Risk Area shall comply with the following:
Item 2A - Page 53
Ordinance No.____
1. Preliminary fuel modification plans shall be submitted to and approved by the Fire Code Official prior to or concurrently with the approval of any tentati ve map.
2. Final fuel modification plans shall be submitted to and approved by the Fire Code Official prior to the issuance of a grading permit.
3. The fuel modification plans shall meet the criteria set forth in the Fuel Modification Section of PSFD Appendix S “Vegetation Management in Very High Fire Hazard Severity Zones.”
1.1 The fuel modification plan shall include provisions for the maintenance of the fuel modification in perpetuity.
4. The fuel modification plan may be altered if conditions change. Any alterations to the fuel modification areas shall have prior approval from the Fire Code Official.
5. All elements of the fuel modification plan shall be maintained in accordance with the approved plan and are subject to the enforcement process outlined in the Fire Code.
82) Chapter 50 Hazardous Materials - General Provisions is adopted in its entirety with the following amendments:
83) Amend subsection 5001.5.2, Hazardous materials inventory statement (HMIS), to read as follows:
5001.5.2 Hazardous Materials Inventory Statement (HMIS). Where required by the Fire Code Official, an application for a permit shall include Palm Springs Fire Department’s Chemical Classification Packet which shall be c ompleted and approved prior to approval of plans, and/or the storage, use or handling of chemicals on the premises. The HMIS Chemical Classification Packet shall include the following information:
1. Product Name.
2. Component.
3. Chemical Abstract Service (CAS) number.
4. Location where stored or used.
5. Container size.
6. Hazard classification.
7. Amount in storage.
8. Amount in use-closed systems.
9. Amount in use-open systems.
84) Add subsection 5003.1.1.1.1, Extremely hazardous substances, to read as follows:
Item 2A - Page 54
Ordinance No.____
5003.1.1.1.1 Extremely Hazardous Substances. No person shall use or store any amount of extremely hazardous substances (EHS) in excess of the disclosable amounts (see Health and Safety Code Section 25500 et al) in a residential zoned or any residentially developed property.
85) Adopt Chapter 51 Aerosols, Chapter 53 Compressed Gases, Chapter 54 Corrosive Materials, and Chapter 55 Cryogenic Fluids in their entirety without amendments.
86) Chapter 56 Explosives and Fireworks is adopted in its entirety with the following amendments:
87) Add subsection 5608.2, Firing, to read as follows:
5608.2 Firing. All fireworks displays, regardless of mortar, device, or shell size, shall be electrically fired.
88) Add subsection 5608.3, Application for permit, to read as follows:
Section 5608.3 Application for Permit. A diagram of the grounds on which the display is to be held showing the point at which the fireworks are to be discharged, the fallout area based on 100 feet per inch of shell size, the location of all buildings, roads, and other means of transportation, the lines behind which the audience will be restrained, the location of all nearby trees, telegraph or telephone line, or other overhead obstructions shall be provided to PSFD.
89) Add new section 5614, “Safe and Sane” and Dangerous Fireworks, to read as follows:
SECTION 5614 “SAFE AND SANE” AND DANGEROUS FIREWORKS
5614.1 Prohibition. The manufacture, sale, possession, storage, handling or use of “safe and sane” fireworks as currently defined in the California Health and Safety Code section 12529 or “dangerous fireworks” as currently defined in the California Health and Safety Code section 12505 or thereafter amended by state statute is prohibited in the City of Palm Springs. The provisions of this section do not apply to fireworks displays conducted in accordance with the provisions of any permit issued by the Palm Springs Fire Department.
5614.2 Seizure of fireworks. Any authorized City of Palm Springs Fire Code Official, peace officer or other city official authorized to enforce the Palm Springs Municipal Code may seize, take, remove, or cause to be removed at the expense of the owner all prohibited fireworks and explosives. This will include all persons, firms or corporations, who manufacture, sell, possess, store, handle or use any prohibited fireworks or explosives as currently described in the California Fire Code sections 5601 and 5608.
Item 2A - Page 55
Ordinance No.____
90) Add new section 5615, Explosives, to read as follows:
SECTION 5615 EXPLOSIVES
5615.1 Prohibition. The manufacture, sale, possession, storage, handling or use of non-permitted “explosives” as currently defined in Title 19 of the California Code of Regulations, Section 1550 or thereafter amended by state law is prohibited in the City of Palm Springs.
91) Chapter 57 Flammable and Combustible Liquids is adopted in its entirety with the following amendments:
92) Add item 4 to subsection 5704.2.11.1, Location, to read as follows:
4. The installation of underground combustible/flammable liquid tanks is hereby prohibited in all residential districts. The F ire Code Official may authorize installation of underground combustible/flammable liquid tanks in agricultural, commercial and manufacturing districts.
93) Adopt Chapter 58 Flammable Gases and Flammable Cryogenic Fluids, Chapter 59 Flammable Solids, Chapter 60 Highly Toxic and Toxic Materials, Chapter 61 Liquefied Petroleum Gases, Chapter 62 Organic Peroxides, Chapter 63 Oxidizers, Oxidizing Gases, and Oxidizing Cryogenic Fluids, Chapter 64 Pyrophoric Materials, Chapter 65 Pyroxylin (Cellulose Nitrate) Plastics, Chapter 66 Unstable (Reactive) Materials, Chapter 67 Water - Reactive Solids and Liquids, and Chapter 80 Referenced Standards in their entirety without amendments.
94) Appendix B is adopted in its entirety with the following amendments:
95) Amend subsection B101.1, Scope, of Appendix B, to read as follows:
B101.1 Scope. The procedures for determining fire-flow requirements for buildings or portions or buildings hereafter constructed shall be in accordance with this appendix. This appendix does not apply to structures other than buildings.
Additions to buildings equating to 50% or less increase in square footage will not require fire flow analysis.
96) Add Appendix “P”, Palm Springs Fire Department Five Minute Response Time Map.
97) Add Appendix “Q”, City of Palm Springs Very High Fire Hazard Severity Zones Map in LRA As Recommended by Cal Fire.
Item 2A - Page 56
Ordinance No.____
98) Add Appendix “S”, Vegetation Management in Very High Fire Hazard Severity Zones
99) Add Appendix “T”, Palm Springs Fire Department Development Requirements
SECTION 4. Section 8.04.520 International Fire Code —Adopted is hereby deleted in its entirety.
SECTION 5 . EXEMPTION FROM CALIFORNIA ENVIRONMENTAL QUALITY ACT. The City Council finds that the amendments to the Municipal Code, made pursuant to this Ordinance, are exempt from the California Environmental Quality Act (“CEQA”) because they do not constitute a project within the meaning of CEQA Section 15378. The amendments herein have no potential for resulting in physical change to the environment, directly or indirectly. The City Council further finds, under Title 14 of the California Code of Regulations, Section 15061(b)(3), that this Ordinance is nonetheless exempt from the requirements of CEQA in that the activity is covered by the general rule that CEQA applies only to projects which have the potential for causing a significant effect on the environment. These amendments do not allow any new activities, but merely adopt updated language. The City Clerk shall be the custodian of record for the documentation supporting this action. Staff is hereby directed to file a Notice of Exemption with within five (5) days of the adoption of this Ordinance.
SECTION 6
. OPERATIVE DATE. The provisions of this Ordinance shall become operative on January 1, 20 23, which is the effective date of the 20 22 edition of the California Fire Code, enacted by the State of California.
SECTION 7. EFFECTIVE DATE. The Mayor shall sign and the City Clerk shall certify to the passage and adoption of this Ordinance and shall cause the same, or the summary thereof, to be published and posted pursuant to the provisions of law and this Ordinance shall take effect thirty (30) days after passage.
SECTION 8. SEVERABILITY. If any section, subsection, clause or phrase of this ordinance is for any reason held by a court of competent jurisdiction to be invalid, such a decision shall not affect the validity of the remaining portions of this ordinance. The City Council of the City of Palm Springs, hereby declares that it would have passed this ordinance and each section of subsection, sentence, clause and phrase thereof, irrespective of the clauses or phrases being declared invalid.
Item 2A - Page 57
Ordinance No.____
PASSED, APPROVED, AND ADOPTED THIS, __ DAY OF __________, 2023.
GRACE ELENA GARNER
MAYOR
ATTEST:
BRENDA PREE, MMC
CITY CLERK
Item 2A - Page 58
Ordinance No.____
CERTIFICATION
STATE OF CALIFORNIA )
COUNTY OF RIVERSIDE ) ss.
CITY OF PALM SPRINGS )
I, Brenda Pree, City Clerk of the City of Palm Springs, California, do hereby certify that Ordinance No. ____ is a full, true, and correct copy, and was introduced at a regular meeting of the Palm Springs City Council on _________ and adopted at a regular meeting of the City Council held on __________ by the following vote:
AYES:
NOES:
ABSENT:
ABSTAIN:
B RENDA PREE, MMC
CITY CLERK
Item 2A - Page 59
ATTACHMENT #3
Item 2A - Page 60
k k
k
k k
PSDF 445
PSDF 444
PSDF 443
PSDF 442PSDF 441
Palm Springs Fire Code Appendix P:
Palm Springs Fire Department Five Minute Response
1 Minute Firefighter Turnout
4 Minute Travel
0 5,000 10,000 15,000 20,0002,500
Feet ±
k Fire Stations
4 Minute Travel Network
4 Minute Travel Area
Palm Springs
Palm Springs
Travel areas mapped using Palm Springs Streets dataset
ArcGIS Network Analyst 10.4.1
August 2016
M. J. Price,
Entrada/San Juan, Inc.
Item 2A - Page 61
-......
··-·· ...... ··-··
7 Palm Springs
The State of California and the Department of Forestry and Fire Protection make no representations or warranties regarding the accuracy of data or maps. Neither the State nor the Department shall be liable under any circumstances for any direct, special, incidental, or consequential damages with respect to any claim by any user or third party on account of, or arising from, the use of data or maps.
Obtain FRAP maps, data, metadata and publications on the Internet at http://frap.cdf.ca.gov For more information, contact CAL FIRE-FRAP, PO Box 944246, Sacramento, CA 94244-2460, (916) 327-3939.
Arnold Schwarzenegger, Governor,
State of California
Mike Chrisman, Secretary for Natural Resources,
The Natural Resources Agency
Del Walters, Director,
Department of Forestry and Fire Protection
Government Code 51175-89 directs the California Department of Forestry and Fire Protection (CAL FIRE) to identify areas of very high fire hazard severity zones within Local Responsibility Areas (LRA). Mapping of the areas, referred to as Very High Fire Hazard Severity Zones (VHFHSZ), is based on data and models of, potential fuels over a 30-50 year time horizon and their associated expected fire behavior, and expected burn probabilities to quantify the likelihood and nature of vegetation fire exposure (including firebrands) to buildings. Details on the project and specific modeling methodology can be found at http://frap.cdf.ca.gov/projects/hazard/methods.htm . Local Responsibility Area VHFHSZ
maps were initially developed in the mid-1990s and are now being updated based on improved science, mapping techniques, and data.
In late 2005 to be effective in 2008, the California Building Commission adopted California Building Code Chapter 7A requiring new buildings in VH FHSZs to use ignition resistant construction methods and materials. These new codes include provisions to improve the ignition resistance of buildings, especially from firebrands. The updated very high fire hazard severity zones will be used by building officials for new building permits in LRA. The updated zones will also be used to identify property whose owners must comply with natural hazards disclosure requirements at time of property sale and 100 foot defensible space clearance. It is likely that the fire hazard severity zones will be used for updates to the safety element of general plans.
This specific map is based on a geographic information system dataset that depicts final CAL FIRE recommendations for Very High FHSZs within the local jurisdiction. The process of finalizing these boundaries involved an extensive local review process, the details of which are available at http://frap.cdf.ca.gov/projects/hazard/btnet/ (click on "Continue
as guest without logging in"). Local government has 120 days to designate, by ordinance, very high fire hazard severity zones within its jurisdiction after receiving the recommendation. Local government can add additional VHFHSZs.
There is no requirement for local government to report their final action to CAL FIRE when the recommended zones are adopted. Consequently, users are directed to the appropriate local entity (county, city, fire department, or Fire Protection District) to determine the status of the local fire hazard severity zone ordinance.
Very High Fire Hazard Severity Zones in LRA
As Recommended by CAL FIRE
Projection Albers, NAD 1983
Scale 1: 60,000
at 36" x 36"
December 21, 2009
©
0 2
Miles
0 3
Kilometers
This map was developed using data products such as parcel and city boundaries provided by local government agencies. In certain cases, this includes copyrighted geographic information.
The maps are for display purposes only - questions and requests related to parcel or city boundary data should be directed to the appropriate local government entity.
DATA SOURCES
CAL FIRE Fire Hazard Severity Zones (FHSZL06_3)
MAP ID: FHSZL_c33_PalmSprings
Fire Hazard Severity Zones
County Boundary
Parcels
City Boundary
Local Responsibility Area State or Federal Responsibility Areas VHFHSZ
Non-VHFHSZ
VHFHSZ
Non-VHFHSZ
Item 2A - Page 62- --
-•-•1
-•---""":,
l !
l I ~-.
~ •-•----- I
ii i
•-1 l •1r-•1 •-·•-• .., I ·1 _ • ..,.- I '1 1
------ ..... ---· : 1,. t 1- ~
\ I - t I
·•. 0
, ~ • I .-• -•..,• •,. • · , I • .-=-:::i t"'•,
• I ---~- ", I • •,
. --··· ... I -•-•- ,._ . ,---------- . '-~ ·, ' -" ~. . ' ·, ½_ ~ , .. . l----~----1~---~ ' r I ! ·-.. '·,. .,.-.9-_, I • ..,.. .• - ·•-,. ._ • ._ ._ - ~ ~ --- I I ·,, t, ,,
·-·-·- I I - ·,., -----,r---"J i ·-·- ' -, ' .
L I ~ ,,. • -~ '
i I ' ·------,·~·""" • ' ' ' ; j7' •••-- ' H '' --~ 11 • I ------~ 7-1c,---c \ _l_ ~ rr , ~ ~ ! I!------.,-·-·-·····-· , _ - ' -• " , ,:r ,., ~ l , l.;.__.L - ,. • .
I£ 1· •=.l!!!!!l- •- ;'.. . L - ~ IL... ~--·-· I ' ,
I
I .
I
I .
I .
JI
I • I .
·---
I • I .
I •
.
I
.....
I •--•~ ·- . . i
• I
. I • I • I
I .
!!-~- :--
! I
- r·-·-·-·-1
I
I
.
I
! ~ +-l- ~ ~
i I • I
I .
I .
- -• -·-• --· -I .
I •
• I .
I .
I .
'
! -·-·•·~---i -'·-·-· i .
I .
I
I
~t--
• I .
.
I
I .
I .
- ~,
i .
I • I .
I . ~,
I .
I .
I .
I
. .
I .
I .
I .
I
. -·1
i -·-· - I
I
PALM SPRINGS FIRE DEPARTMENT
Appendix “S”
VEGETATION MANAGEMENT IN VERY HIGH FIRE
HAZARD SEVERITY ZONES
PALM SPRINGS FIRE DEPARTMENT
300 NORTH EL CIELO ROAD
PALM SPRINGS, CA 92262
COMMUNITY RISK REDUCTION CONTACT INFORMATION:
OFFICE: 760.323.8181
EMAIL: [email protected]
Item 2A - Page 63
TABLE OF CONTENTS
1.1 INTRODUCTION ................................ ................................ ................................ .... 3
1.2 PURPOSE ................................ ................................ ................................ .............. 3
1.3 PENALTY ................................ ................................ ................................ .............. 3
1.4 CLEARANCE REQUIREMENTS/FUEL MODIFICATION ................................ ... 3-5 Item 2A - Page 64
1.1 INTRODUCTION
Vegetation management has proven to be a major factor in reducing the chances of buildings igniting from wildfires and from wildland areas being ignited from burning buildings. When combined with special building construction features, the chances of ignition are further reduced.
Fire and Building Department agencies adopt local and state codes that require vegetation management and special construction featur es. The Vegetation Management Guideline increase requirements for b rush clearance and fire s afety in the Very High Fire Hazard Severity Zones (VHFHSZ).
1.2 PURPOSE
This guideline establishes appropriate safety measures necessary to mitigate the occurren ce of fires.
1.3 PENALTY
A first violation of this section shall b e an infraction punishabl e by a fine not to exceed $250. A second and all subse quent violations of this appendix shall be subject to prosecution as an infraction or prosecution as a misdeme anor punishable by a fine not to exceed $1,000, by imprisonment in the County Jail for a per iod not to exceed six months, or by both such fine and imprisonment. In addition, to the aforementioned penalties, any viola tor convicted under this appendix, which resulted in a fire, may be liable for any civil cost recovery asso ciated with the fire, as permitted by law.
1.4 CLEARANCE REQUIREMENTS
Owners of property located in the Very High Fire Hazard Severity Zone (VHFHSZ) shall maintain their property in accordance with the 2022 California Fire Code and Palm Springs Fire Department Vegetation Management Guideline. Year-round compliance shall be maintained as described below on all native brush, weeds, grass, trees, and hazardous vegetation within 200 feet of any structure/buildings, whether those structures are on the owner’s property or adjoining properties, and within 10 feet of any combustible fence or roadway/driveway used for vehicular travel.
1. Areas within 200 feet of structures and/or 10 feet of roadside surfaces or combustible fence: Grass shall be cut to three inches in height. Native brush shall be reduced in quantity to three inches in height. This does not apply to individual native shrubs spaced a minimum of 18 feet apart, provided such shrubs are trimmed up from the ground to 1/3 of their height with all dead material being removed (see diagram below).
2. For trees taller than 18 feet, trim lower branches so no foliage is within six feet of the ground, and remove all dead material. For trees and shrubs less than 18 feet, Item 2A - Page 65
remove lower branches to 1/3 of their height, and remove all dead material (see diagram below).
3. Trees shall be trimmed up so the foliage is no closer than 10 feet from the outlet of a chimney (see diagram below).
4. All roof surfaces shall be maintained free of substantial accumulation of leaves, needles, twigs and any other combustible matter. Maintain five feet of vertical clearance between roof surfaces and portions of overhanging trees (see diagram below).
5. All cut vegetation and debris shall be removed in a legal manner. Cut vegetation may be machine processed (i.e., chipped) and spread back onto the property at a depth not to exceed three inches within 30 feet of structures and six inches beyond 30 feet of structures. In addition, spread material shall not be placed within 10 feet of any usable roadside.
6. Use of metal cutting blades for grass or brush clearance shall be limited to those which are non-ferrous/non-sparking.
7. Brush clearance cannot be done on red flag days, when fire weather conditions are at their peak.
8. Individuals engaged in brush clearance operations shall not engage in any other activities during their actual clearance of grass or brush.
9. An approved 2-A two (2) gallon water fire extinguisher, or a pressurized garden hose with attached nozzle shall be within 10 feet of any grass or brush clearance operation, to quickly extinguish a small fire before it burns out of control.
10. Where a gasoline container is present at the site of the grass or brush clearance operation, a minimum 4A 60BC dry chemical fire extinguisher shall be within 10 feet of the brush clearance operation.
11. A cell phone capable of dialing 9-1-1 shall be charged and readily accessible to the grass or brush clearance operation.
Item 2A - Page 66
The above general requirements also apply to landscape vegetation.
VEGETATION M ANAGEMENT IS A YEAR -ROUND
RESPONSIBILITY
Clear Early, Clear Often.
Item 2A - Page 67
PALM SPRINGS FIRE DEPARTMENT
Appendix “T”
PALM SPRINGS FIRE DEPARTMENT
DEVELOPMENT REQUIREMENTS
PALM SPRINGS FIRE DEPARTMENT
300 NORTH EL CIELO ROAD
PALM SPRINGS, CA 92262
Community Risk Reduction Division
OFFICE: 760.323.8181
EMAIL: [email protected]
Item 2A - Page 68
TABLE OF CONTENTS
SCOPE ................................ ................................ ................................ ........................... 3
1.0 WATER AGENCY / DISTRICT REQUIREMENTS ................................ ................. 3
2.0 PLANS AND PERMITS ................................ ................................ .......................... 4
3.0 PRIVATE FIRE SERVICE MAINS ................................ ................................ .......... 5
4.0 FIRE SPRINKLER SYSTEMS - NFPA 13 ................................ .............................. 8
5.0 FIRE SPRINKLER SYSTEMS - NFPA 13R ................................ ......................... 12
6.0 FIRE SPRINKLER SYSTEMS - NFPA 13D ................................ ........................ 14
7.0 INSPECTIONS AND TESTS ................................ ................................ ............... 16
8.0 EMERGENCY ACCESS AND GATES ................................ ................................ 19
9.0 FIRE APPARATUS ACCESS ROADS ................................ ............................... 20
Item 2A - Page 69
SCOPE
These requirements have been developed to assist development applicants, architects and contractors in determining the minimum requirements for fire protection systems, emergency access/gates, fire apparatus access roads and solar photovoltaic systems . It will provide the minimum design, installation, testing, and inspection procedures in the City of Palm Springs based on the following:
• Palm Springs Municipal Code, Chapter 8.04 of Title 8
• California Fire Code 2022 Edition – CCR Title 24, Part 9, adopted as hereinafter modified including Appendix B, P, Q, and S
• California Code of Regulations (CCR) – Title 19
• California Building Code 2022 Edition – CCR Title 24, Part 2
• California Residential Code 2022 Edition – CCR Title 24, Part 2.5
• National Fire Protection Association (NFPA) Standards – As adopted by the Office of State Fire Marshal
The authority having jurisdiction in determining compliance with the above codes and standards shall be the Palm Springs Fire Department.
WATER AGENCY / DISTRICT CONTACTS SERVICING PALM SPRINGS
1.0 WATER AGENCY / DISTRICT REQUIREMENTS
1.1 Contractors or developers will contact the Water Agency / District and request the following information to facilitate designing private fire service mains and fire sprinkler systems:
• Water service size, material type and schedule.
• Length of service, fittings and valves installed.
• Water meter manufacturer, model and size (if fire service is metered). • Backflow manufacturer, model, size and arrangement.
Service Area Service Area
Palm Springs South of Interstate 10 Palm Springs North of Interstate 10
Desert Water Agency Mission Springs Water District
1200 S. Gene Autry Trail 66575 2nd Street
Palm Springs, CA 92264 Desert Hot Springs, CA 92240
(760) 323-4971
www.dwa.org
(760) 329-6448
www.mswd.org
Item 2A - Page 70
1.2 The Water Agency / District will provide flow information for water mains or fire hydrants:
• Static pressures.
• Dynamic/residual pressures.
• Gallons per minute.
• Water main size and configuration.
• Fire Hydrant Identification Numbers used in testing and street address or location description . Indicate Fire Hydrant Identification Number where pressure readings were taken.
• Fire hydrant flow-test data is good for a period of one (1) year.
2.0 PLANS AND PERMITS
2.1 When there are significant changes in occupancy, water supply, storage heights, type and quantity of storage, storage configurations, tenant improvemen ts or any other changes which may affect the fire sprinkler system design, the owner, tenant or contractor shall submit plans and secure permits.
2.2 Complete plans for private fire service mains o r fire sprinkler systems should be submitted for approval well in advance of installation . Underground Fire System Mains shall be a separate plan submittal and permit . Submit a minimum of three (3) sets of drawings for review . Upon approval, the Fire Pr evention Bureau will retain one (1) set.
2.3 Plans shall be submitted to:
City of Palm Springs
Building and Safety Department
3200 E. Tahquitz Canyon Way
Palm Springs, CA. 92262
Counter Hours: Monday through Thursday – 8:00 AM to 6:00 PM A deposit for plan check and inspection fees is required at the time of plan submi ttal.
The f inal fees are based on the fee schedule adopted by resolution of the Palm Springs City Council.
2.4 Provide three (3) complete sets of listings and manufacturer’s technical data sheets for all system components with plan submittals . All system mat erials shall be UL listed or FM approved for fire protection service and approved by the Fire Prevention Bureau prior to installation.
2.5 Plans shall include all necessary engineering features, inc luding all hydraulic reference nodes, pipe lengths and pipe di ameters as r equired by the appropriate codes and standards . Plans and support data (calculations and manufacturer's technical data sheets), including fire flow data, shall be submitted with eac h plan submittal. Complete and accurate legends for all symbols and abbreviations shall be provided on the plans.
Item 2A - Page 71
“As Built Drawings and Calculations” will be accepted when there are minor deviations from approved drawings and calculations. Significant changes will require a resubmittal of plans.
The Fire Prevention Bureau wil l make the final determination of fire flow requirements, number of fire hydrants and hydrant spacing.
3.0 PRIVATE FIRE SERVICE MAINS
3.1 NFPA 24 shall establish the minimum requirements for the installation of private fire service mains and their appurtenances supplying automatic sprinkler systems, open sprinkler systems, water spray fixed systems, foam systems, private hydrants, monitor nozzles or standpipe systems with reference to water supplies, private hydrants and hose cabinets.
3.2 Private fire service mains shall be not less than eight (8) inches in diameter when serving private fire hydrants and fire sprinkler systems.
3.3 Piping with a minimum rating of class 200 installed to NFPA 24 stan dards is required for all private fire service mains.
3.4 All thru st blocks on private fire service mains, private fire hydrant lines and fire sprinkler laterals shall be calculated as required by NFPA 24 or use Water Agency / District drawings. Calculations shall be submitted and the resulting dimensions of thrust blocks shall be shown on the plans. Restrained Joint Systems are allowed in lieu of thrust blocks . Minimum design w orking pressure shall be 200 psi . Special design considerations may be required on lines with high static pressures or lines in which fire pumps are installed.
3.5 Private fire service mains, when supplying three (3) or more fire hydrants, shall be designed with a looped water supply.
3.6 In order to isolate the fire sprinkler underground lateral from any private fire hydrant system, a non -indicating listed underground gate valve with an approved roadway box shall be required.
3.7 On site fire hydrants and fire department connections, located less than three (3) feet behind the face of a curb or w hen no curb is provided, shall be protected by guard posts set in concrete to the following specifications:
• Constructed of steel not less than four (4) inches in diameter and concrete filled.
• Spaced not more than four (4) feet between posts on center. • Set not less than three (3) feet deep in a concrete footing of not less than a fifteen (15) inch diameter.
• Set with the top of the posts not less than three ( 3) feet above ground .
Located not less than three ( 3) feet from the fire hydrants, post indicator valves and fire department connections.
• All guard posts shall be painted yellow (Rust-Oleum Safety Yellow #2149 or equivalent).
Item 2A - Page 72
3.8 The installing contractor shall provide a signed and completed "Contractors Material and Test Certificate for Underground Piping" form as required by NFPA 24 (2022 edition).
Double Check Detector Assemblies (Private)
3.9 All Double Check Detector Assemblies (DCDA) shall be UL listed / FM approved for fire protection service in compliance with NFPA 24.
3.10 All DCDA shall be installed with two (2) tamper switches and electrically monitored at a UL listed central station service, when there are:
• Twenty or more fire sprinkler heads.
• Fire sprinkler supervision and alarm, fire alarm or security systems are installed.
3.11 All DCDA shall be provided with a chain and frangible security lock . A key shall be kept in the spare sprinkler head box and Knox box.
3.12 Reduced pressure zone assemblies or reduced pressure detector assemblies shall not be installed in private fire service mains and fire sprinkler systems.
Fire Department Connections (FDC)
3.13 FDC shall be installed at apparatus access roads in locations approved by the Fire Prevention Bureau. Check with the Fire Prevention Bureau prior to plan submittal .
The FDC shall extend between thirty (30) inches and thirty-six (36) inches above finished grade.
3.14 FDC shall be visible (facing the apparatus access road), accessible and installed in approved locations downstream of all DCDA. FDC shall be located within thirty (30) feet of a public fire hydrant. Exceptions may be made by the fire code official.
3.15 FDC shall be equipped w ith Knox locking protective plugs . Contact the Fire Prevention Bureau at (760) 323-8186 for a Knox Authorization Order Form.
3.16 The curb adjacent to the FDC shall be painted red for a total of fifteen (15) feet (7 1/2 feet on each side of the FDC).
3.17 When the total sprink ler system demand, including hose allowance, is less than 1,000 GPM, the FDC riser shall be four (4) inches in nominal diameter and shall have a standard 2-way threaded 2 1/2 inch connection.
3.18 When the total sprinkler system demand, including ho se allowance, is 1,000 GPM to 1,199 GPM, the FDC riser shall be six (6) inches in nominal diameter and shall have a standard 3-way threaded 2 1/2 inch connection.
3.19 When the total sprinkler system demand, including hose allowance, is greater than 1,200 GPM, the FDC riser shall be six (6) inches in nominal diameter and shall have a standard 4-way threaded 2 1/2 inch connection.
3.20 In a building complex where two (2) or more buildings are served, the id entification of which building is served by separate FDC; the Fire Prevention Bureau will require signs of substantial construction to be posted at each FDC identifying the respective buildings served. The minimum letter size shall be one (1) inch on a co ntrasting background.
3.21 FDC shall be painted red (Rust-Oleum Safety Red # 2163 or equivalent).
Item 2A - Page 73
3.22 FDC piping shall be ductile iron from the private fire service main to the FDC check valve. The pipe from the FDC check valve to the FDC shall be galvanized steel pipe. NFPA 13R FDC piping shall be copper from the private fire service main.
Fire Hydrants (Private)
3.23 Commercial fire hydrants with three (3) outlets (one-4 inch and two-2 1/2 inch) are required when fire flow demand is 1,500 GPM or greater. Residential fire hydrants with two (2) outlets (one-4 inch and one-2 1/2 inch) are required when the fire f low demand is less than 1500 GPM . Existing residential fire hydrants that are located within 250 feet of a residential property line do not need to be upgraded to commercial fire hydrants if the hydrant can provide the required fire flow.
3.24 Private hydrants shall be oriented with the four (4) inch discharge facing the street or fire apparatus access road.
3.25 The curb adjacent to the fire hydrant shall be painted red for a total of fifteen (15) feet (7 1/2 feet on each side of the hydrant).
3.26 Private fire hydrants shall be paint ed red (Rust -Oleum Safety Red # 2163 or equivalent).
3.27 Blue reflective markers shall be installed to identify location of fire hydrants . These markers shall be visible from both directions of vehicle travel.
3.28 Hydraulic calculations shall be provided for all private fire hydrant systems .
Calculations shall be calculated back to the point of the flow test . The fire hydrant system shall meet the fire flow requirements as required by the California Fire Code (2022 Edition).
3.29 When the private fire service main serves both fire sprinkler system(s) and private fire hydrant(s), the hydraulic calculation shall include the fire hydrant flow rate with associated private fire hydrant(s) and fire sprinkler flow rate for a minimum design of 20 psi residual pressure for the fire hydrant(s).
Water Plans and Water Main Installation (Private)
3.30 Provide the following notes on private fire service water main plans:
FIRE DEPARTMENT NOTES:
1. The installation of the private fire service mains shall comply with:
• NFPA 24
• California Building Code (2022 Edition)
• California Fire Code (2022 Edition)
• Palm Springs Fire Department Development Requirements, Appendix “T”
2. No combustibles sha ll be delivered to building job site prior to the water mains and fire hydrants being operational.
3. The following inspections are required:
• Thrust block pre-pour, trench, and backfill inspection. • Underground hydrostatic test - 200 psi for 2-hours.
Item 2A - Page 74
• Underground flush.
• Underground final. A completed and signed "Contractors Material and Test Certificate for Underground Piping" form as required per NFPA 24 (2022 Edition).
TO SCHEDULE INSPECTIONS CALL THE FIRE PREVENTION BUREAU AT (760) 323-8186 AT LEAST 48 HOURS PRIOR TO THE REQUESTED INSPECTION DATE AND TIME.
4. All Double Check Detector Assemblies (DCDA) shall be installed with two (2) tamper switches and electrically monitored at a UL listed central station service, when there are:
• 20 or more fire sprinkler heads.
• Fire alarms or security systems installed.
5. Ductile iron underground piping shall be installed beginning five (5) feet from a building and continue into the building.
6. No joints shall be installed under the building.
7. The civil engineer who designed the wat er system hereby certifies that this water system is in accord ance with th e requirements as prescribed by the Fire Prevention Bureau, the California Fire Code (2022 Edition) and NFPA 24 (2022 Edition).
8. Breakaway spools or breakaway bolts are required.
4.0 FIRE SPRINKLER SYSTEMS – NFPA 13
Controls
4.1 All control valves shall be UL listed indicating valves.
4.2 All valves controlling the water supply for automatic sprinkler systems, pumps, tanks, water levels and temperatures, critical air pressures, and water -flow switches on all sprinkler systems shall be electrically supervise d by a listed fire alarm control unit and monitored at a UL listed central station service.
4.3 An approved audible sprinkler flow alarm (horn/strobe with weather -proof back box) shall be provided o n the exterior of the building in an approved location. A sec ond horn/strobe shall be installed in the interior of the building in a normally occupied location. Power shall be provided from a listed fire alarm control unit.
4.4 A dedicated electrical circuit with a circuit breaker lock shall be required for the listed fire alarm control unit.
Fire Sprinkler Risers (NFPA 13)
4.5 When more than one (1) fire sprinkler riser is served by a single private fire service main lateral, a separate system riser with a UL listed indicating control valve, riser check valve, water flow i ndicator and main drain is required for each fire sprinkler riser.
Item 2A - Page 75
4.6 In multi-story buildings, each floor shall have a sectional riser with a UL listed indicating control valve, riser check valve, water flow indicator and main drain.
4.7 In order to provide acce ss to the ri ser for future maintenance and repair, all fire sprinkler system ri ser locations shall provide a minimum eighteen ( 18) inch clearance to each side and to the front of the riser . If a riser is to be concealed by means of a wall or closet, acces s to the riser shall be provided by means of a door with minimum dimensions of two (2) feet and six (6) inches by six (6) feet and eight (8) inches.
Piping and Hangers (NFPA 13)
4.8 Threaded steel pipe shall have a minimum wall thickness of Schedule 30 for branch lines less than 2 1/2 inches and Schedule 40 for all other piping.
4.9 Rolled groove and welded steel pipe shall have a minimum wall thickness of Schedule 10.
4.10 The discharge area for the main dra in and inspector's test valve shall be protected with a concre te splash pa d to prevent damage to landscaping during periodic testing.
4.11 Trapeze hangers shall be installed according to NFPA 13 . The acceptable trapeze methods as outlined in NFPA 13 shall be S chedule 10, Schedule 40 or angles . No other methods will be a ccepted unle ss a structural engineer or the architect of record provides to the Fire Prevention Bureau calculations and diagrams wet stamped and signed for each application.
4.12 Where a beam or jois t thickness will not accommodate a fastener of a required length, a throug h bolt with the required diameter of the bolt and washer will be acceptable. All-thread rod is not acceptable for the required bolt.
4.13 Lag bolts and screws are not acceptable for seismic bracing.
4.14 Seismic sway bracing shall use Schedule 40 pipe as a minimum.
Design (NFPA 13)
4.15 For commercial and industrial “Shell Buildings”, with the potential for high -pile storage and/or wherein no specific end use is identified at the time of plan check , the sprinkler system shall provide a minimum density of .45 GPM/square foot for a 2,000 square foot design area and 286°F sprinkler heads shall be used in these buildings. Roof coverage over mezzanine areas shall also be built to this standard .
Any dev iation from this requirement will require the Fire Prevention Bureau approval.
4.16 It is incumbent upon the sprinkler system designer to advise the building owner that the above density and design area are minimums for shell buildings; and that increases in sprinkler protection may be required based on future occupancy hazard classification, storage commodity classification, and storage configuration according to NFPA 13 and the California Fire Code (2022 Edition).
4.17 When a shell building is built without a hard lid or T -bar ceiling, the upright fire sprinklers shall be des igned to the unfinished ceiling height and the density and design area for the required floor area.
4.18 Fire sprinkler design shall be limited to 90% of the available water supply.
Item 2A - Page 76
4.19 Non-combustible construction shall be as defined by th e California Building Cod e (2022 Edition). Wood frame construction shall be considered combustible construction regardless of materials used for surface covering.
4.20 Sprinklers with a temperature rating of not less than a n intermediate temperature rating are required in all main ele ctrical panel and meter rooms . No combustible materials shall be stored in these rooms.
4.21 Light fixtures, soffits and other potential obstructions shall not interfere with the spray patterns of s prinkler heads . The sprinkler contractor shall ensure that th e type and l ocation of potential obstructions are considered in the design and installation of the system . The sprinkler contractor is responsible for coordinating and resolving conflicts in coverage patterns.
4.22 Fire sprinklers shall not be installed directly below automatic smoke and heat vents.
4.23 Inspector Test Valve access panels and doors to fire spr inkler riser rooms shall have signs with appropriate descriptions.
4.24 All electrical rooms, upright sprinklers at the roof or in the attic space, non - conditioned rooms or exterior sprinkler heads shall be 200°F – 212°F heads.
4.25 If the attic space is less than thirty-six (36) inches in height and of combustible construction, all upright fire sprinkler heads shall be in accordance with NFPA 13, Section 8.15.1.6.
Plans (NFPA 13)
4.26 Complete detailed work sheets and computer hydraulic calculations as required by NFPA 13 shall be included with all submittals for hydraulically designed sprinkler systems. Calculations shall extend to the point at which the water supply data wa s determined.
4.27 Water supply curves and system demand curves, including underground friction loss, hose allowance, and applicable in -rack sprinkler demand, shall be computer generated graphs . Sprinkler system design, including hose demand, shall be limited to 90% of the available water supply . Water supply data may be obtained from the Fire Prevention Bureau by calling (760) 323-8186.
4.28 If installed piping is six (6) inches or larger, structural lo ad calculations will be required for the structural elements/systems supporting the load.
4.29 Provide separate drawings for the piping plan and reflective ceiling plan.
4.30 Provide a fire sprinkler legend including sprinkler symbol, manufacturer, Sprinkler Identification Number (SIN), model, style, K -factor, degree, finish, escutcheon and quantity.
4.31 Provide the occupancy type of each room, ceiling heights and ceiling slopes with direction, slope pitch and ceiling height at the beginning of the slope as applicable.
4.32 Provide soffit and ceiling pocket details including widths, depths and heights.
4.33 Provide Seismic Bracing Calculations on the drawings per NFPA 13 using Cp of
0.74 and l/r ratio of 200 . Separate Seismic Bracing Calculations shall be provided for lateral and longitudinal braces and each pipe size. Show details of the s eismic bracing and branch line restraints on the drawings. Piping individually supported by rods less than six (6) inches long measured between the top of the pipe and the Item 2A - Page 77
point of attachment t o the building structure shall not be used in lieu of seismic lateral bracing.
4.34 Hydraulic Plate information shall be included on the drawings.
4.35 Provide calculations of the number of sprinklers to calculate and the number of sprinklers on a branch line and list assumed remote area square feet.
4.36 Mark on the drawings the m ost hydraulically demanding remote area; and zone of influence for lateral and longitudinal seismic bracing.
4.37 Pipe Schedule Design shall not be used in existing systems, extension of existing systems or new systems.
4.38 Provide the following notes on fire sprinkler plans:
FIRE DEPARTMENT NOTES (NFPA 13):
1. The installation of the sprinkler system or modifications to existing sprinkler systems shall comply with:
• NFPA 13
• California Building Code (2022 Edition)
• California Fire Code (2022 Edition)
• The City of Palm Spr ings Municipal Code Chapter 8, Sections 8.04.500 and 8.04.510
• Palm Springs Fire Department Development Requirements, Appendix “T”
2. The Fire Prevention Bureau will require the following inspections and tests as a minimum:
• Overhead installation and hydrostatic test – 200 psi for 2-hours. • Fire sprinkler system final inspection . A completed and signed "Contractors Material and Test Certificate for Aboveground Piping " form as required per NFPA 13.
TO SCHEDULE INSPECTIONS CALL THE FIRE PREVENTION BUREAU AT (760) 323-8186 AT LEAST 48 HOURS PRIOR TO THE REQUESTED INSPECTION DATE AND TIME.
3. A dedicated electrical circuit with a circuit breaker lock shall be required for the listed fire alarm control unit.
4. All valves controlling the water supply for automatic sprinkler systems, pumps, tanks, water levels and temperatures, critical air pressures, and water-flow switches on all sprinkler systems sh all be electrically supervised by a listed fire alarm control un it and monitored at a UL listed central station service.
5. An approved audib le sprinkler flow alarm (horn/strobe with weather -proof back box) shall be provided on the exterior of the building in an approved location. Power shall be provided from a listed fire alarm control unit.
Item 2A - Page 78
6. The fire sprinkler branch lines shall b e restrained against excessive vertical and lateral movement by use of a wrap -around U-hook or by other approved means per NFPA 13.
5.0 FIRE SPRINKLER SYSTEMS – NFPA 13R
Design (NFPA 13R)
5.1 The sprinkler contractor shall calculate the friction loss for all pipe s, meters, valves, fittings and other appurtenances when designing the hydraulic calculations for the NFPA 13R fire sprinkler system.
5.2 Fire sprinkler design shall be limited to 90% of the available water supply.
5.3 Fire sprinkler systems shall require a single 2 1/2 inch FDC when the building exceeds 2,000 square feet or is more than one-story.
5.4 An inspector’s test valve must be provided from a remote portion of the system .
Orifice size shall be the smallest orifice of any sprinkler in the system . This valve shall be a full port ball valve with signed access panel and a copper stub outside the wall.
5.5 Access panels for fire sprinkler risers, inspector test valves and doors for fire sprinkler riser rooms, all shall have signs with appropriate descriptions.
5.6 Fire sprinkler protection is required in any size bathroom when a walk-in closet must exit through a bathroom.
5.7 Garages, attics and outside mechanical and/or electrical rooms shall use commercial quick response fire sprinkler heads with a 200 °F – 212°F temperature rating. Garage fire sprinkler spacing shall be 130 square feet . Garage fire sprinklers shall be designed for a flow rate of 13 GPM with a 4.2 K-factor head and
14.8 GPM for a 5.6 K-factor head.
5.8 Fire sprinkler protection is required for carports, garages and similar structures, regardless of construction, unless physically separated by a minimum of fifteen (15) feet from dwellings or other structures.
5.9 Minimum piping size shall be one (1) inch nominal.
5.10 Light fixtures, soffits and other potential obstructio ns shall not interfere with the spray patterns of sprinkler heads . The sprinkler contractor shall ensure that the type and locat ion of potential obstructions are considered in the design and installation of the system . The sprinkler contractor is respons ible for coo rdinating and resolving conflicts in coverage patterns.
5.11 All valves controlling the water supply for automatic sprinkler systems, pumps, tanks, water levels and temperatures, critical air pressures, and water-flow switches on all sprinkler systems shall be electrically supervised by a listed fire alarm control unit and monitored at a UL listed central station service.
5.12 An approved audible sprinkler flow alarm (horn/strobe with weather -proof back box) shall be provided on the exterior of the building in an approved location.
5.13 A dedicated electrical circuit with a circuit breaker lock shall be required for the listed fire alarm control unit.
Item 2A - Page 79
5.14 Additional exterior horn/strobes may be required when there are more than four (4) dwelling units per building.
5.15 Contractor shall provide a spare head box with sprinkler wrench and three (3) spare sprinkler heads of each type, unless there are less than three (3) heads of that type.
Plans (NFPA 13R)
5.16 Piping shall be detailed on drawing from public water main to riser including pipe sizes, pipe types, pipe lengths, all fittings, all valves, water meter manufacturer and model, back flow device manufacturer, model and size and elevations of house finished floor relative to fire hydrant outlet where pressures were taken.
5.17 Provide a riser detail on the drawing, including a flow control valve with a tamper switch.
5.18 Provide an inspector test detail on drawing.
5.19 Provide a table on the drawings for piping support spacin g and one (1) and two (2) point sprinkler head vertical restraint spacing.
5.20 Provide a fire sprinkler legend including sprinkler symbol, manufacturer, Sprinkler Identification Number (SIN), model, style, K -factor, degree, finish, escutcheon and quantity.
5.21 Provide occupancy type of each room, ceiling heights and ceiling slopes with direction, slope pitch and ceiling height at the beginning of the slope as applicable.
5.22 Provide soffit and ceiling pocket details including widths, depths and heights.
5.23 Provide beam details including widths, heights and spacing.
5.24 Provide location of required horn/strobes.
5.25 Provide the following notes on fire sprinkler plans:
FIRE DEPARTMENT NOTES (NFPA 13R):
1. The installation of the sprinkler system or modifications to existing sprinkler systems shall comply with:
• NFPA 13R
• California Building Code (2022 Edition)
• California Fire Code (2022 Edition)
• The City of Palm Springs Municipal Code Chapter 8 , Sections 8.04.500 and 8.04.510
• Palm Springs Fire Department Development Requirements, Appendix “T”
2. The Fire Prevention Bureau will require the following inspections and tests as a minimum:
• Overhead installation and hydrostatic test – 200 psi for 2-hours. • Fire sprinkler system final inspection . A completed and signed "Contractors Material and Test Certificate for Aboveground Piping " form as required per NFPA 13R.
Item 2A - Page 80
TO SCHE DULE INSPECTIONS CALL THE FIRE PREVENTION BUREAU AT (760) 323-8186 AT LEAST 48 HOURS PRIOR TO THE REQUESTED INSPECTION DATE AND TIME.
3. A dedicated electrical circuit with a circuit br eaker lock shall be required for the listed fire alarm control unit.
4. All valves controlling the water supply for automatic sprinkler systems, pumps, tanks, water levels and temperatures, critical air pressures, and water-flow switches on all sprinkler syst ems shall be electrically supervised by a listed fire alarm co ntrol unit and monitored at a UL listed central station service.
5. An approved audible sprinkler flow alarm (horn/strobe with weather -proof back box) shall be provided on the exterior of the build ing in an approved location.
6. Contractor shall supply owner wit h a copy of the 2013 California Edition of NFPA 25 “Inspection, Testing and Maintenance of Water -Based Fire Protection Systems.”
6.0 FIRE SPRINKLER SYSTEMS – NFPA 13D
Design (NFPA 13D)
6.1 A full port ball valve shall be installed at one - and two -family dwelling units as a shut-off valve for both domestic and fire sprinkler water supply . A shut -off valve shall be installed for the domestic water supply after the fire sprinkler system take - off.
6.2 The sprinkler system piping shall not have a separate control valve installed.
6.3 Fire sprinkler system design shall be limited to 90% of the available water supply.
Fire sprinkler systems shall be combined domestic and fire sprinkler service to the dwelling. Hydraulic calculations shall include 5 GPM domestic water demand at the domestic water take-off.
6.4 Access panels for fire sprinkler risers shall have a sign with an appropriate description.
6.5 Fire sprinkler protection is required in any size bathroom when a walk-in closet must exit through a bathroom.
6.6 Garages, attics and outsi de mechanical rooms shall use fire sprinkler heads with a 200°F – 212°F temperature rating.
6.7 A single pilot head shall be installed in attic areas over the forced air unit(s).
6.8 All listed equipment and materials shall be installed in accordance with the term s of their listings and the manufacturer's instructions.
6.9 Fire sprinkler protection is required for garages and similar structures, regardless of construction, unless physically separated by a mi nimum of fifteen ( 15) feet from dwellings or other structures.
Item 2A - Page 81
6.10 Piping systems shall be tested in accordance with the California Plumbing Code for multipurpose piping and NFPA 13D and manufacturer’s listing and recommendations for fire sprinkler piping.
6.11 Light fixtures, soffits and other potential obstructions shall n ot interfere with the spray patterns of sprinkler heads . The sprinkler contractor shall ensure that the type and locat ion of potential obstructions are considered in the design and installation of the system . The sprinkler contractor is responsible for c oordinating and resolving conflicts in coverage patterns.
6.12 Water Flow Switch and Alarm . A water flow switch shall be installed with every residential fire sprinkler system. The system shall include:
1. An approved audible sprinkler flow alarm (horn/strobe wi th weather-proof back box or equal) shall be provided on the exterior of the building in an approved location. The horn/strobe shall be outdoor-rated.
2. Residential smoke alarms (relay/power supp ly module connected to multi - station/interconnected smoke alar ms and fire sprinkler flow switch) shall be interconnected so that operation of any smoke alarm or fire sprinkler flow switch causes all smoke alarms within the dwelling to sound and activate th e exterior horn/strobe. The wiring of this system shall be in accordance with the manufacturer’s instructions.
6.13 Contractor shall provide a spare head box with sprinkler wrench and two (2) spare sprinkler heads of each type, unless there is less than two (2) heads of that type.
6.14 Prescriptive pipe size method shall not be used to design fire sprinkler systems.
6.15 Hydraulic calculation procedures in accordance with NFPA 13 shall be used for all types of sprinkler systems.
6.16 Network fire sprinkler systems are prohibited.
Plans (NFPA 13D)
6.17 Piping shall be detailed on drawing from public water main to riser including pipe sizes, pipe types, pipe lengths, all fittings, all valves, water meter manufacturer and model, back flow device manufacturer, model and size and elevat ions of house finished floor relative to fire hydrant outlet where pressures were taken.
6.18 Provide a riser detail on the drawing.
6.19 Provide a table on the drawings for piping support spacing and one (1) and two (2) point sprinkler head vertical restraint spacing.
6.20 Provide a fire sprinkler legend including sprinkler symbol , manufacturer, Sprinkler Identification Number (SIN), model, style, K -factor, degree, finish, escutcheon and quantity.
6.21 Provide occupancy of each room, ceiling heights and ceiling slopes with di rection, slope pitch and ceiling height at the beginning of the slope as applicable.
6.22 Provide soffit and ceiling pocket details including widths, depths and heights.
6.23 Provide beam details including widths, heights and spacing.
6.24 Design a looped fire sprinkler piping system where possible.
Item 2A - Page 82
6.25 Provide the following notes on fire sprinkler plans:
FIRE DEPARTMENT NOTES (NFPA 13D):
1. The installation of the sprinkler system or modifications to existing sprinkler systems shall comply with:
• NFPA 13D
• California Residential Code (2022 Edition)
• California Fire Code (2022 Edition)
• The City of Palm S prings Municipal Code Chapter 8 , Sections 8.04.500 and 8.04.510
• Palm Springs Fire Department Development Requirements, Appendix “T”
2. Water Flow Switch and Alarm. A water flow switch shall be installed in every dwelling unit fire sprinkler system. The system shall include:
• An approved audible sprinkler flow alarm (horn/strobe with weather -proof back box or equal) shall be provided on the exterior of the building in an approved location. The horn/strobe shall be outdoor-rated. • Residential smoke alarms (relay/power supply module connected to multi- station/interconnected smoke alarms and fire sprinkler flow switch) shall be interconnected so that operation of any smoke alarm or fire spri nkler flow switch causes all smoke alarms within the dwelling to sound and activate the exterior horn/strobe . The wiring of thi s system shall be in accordance with the manufacturer’s instructions.
7.0 INSPECTIONS AND TESTS
7.1 The system must pass all the fire p rotection systems inspections prior to a certificate of occupancy.
7.2 The Inspection, Testing and Maintenance of Water -Based Fire Protection Systems shall comply with California Code of Regulations (CCR) Title 19, Division 1, Chapter 5, and NFPA 25 (2013 Edition).
7.3 Inspection, Flushing, and Hydrostatic Testing of Underground Fire Service Mains.
Note: It is the contractor’s responsibility to notify the AHJ of inspection, performance of tests, and completion of Material and Test certificates (10.10.1).
1. All pipe and fittings shall remain exposed for visual inspection.
2. Flush line until w ater runs clear and line is free of debris in accordance with NFPA 24 (10.10.2.1).
3. Use chart below ( Figure 1.0) to determine appropriate number and size of hose lines for reach desired water flow for proper flushing. Example: a 6” underground fire line re quires a flow of 880 GPM for proper flushing . To achieve a proper flow, two (2) – 2 1/2 ” hoses would need to be attached to the manifold .
Alternately a single 4” hose could be atta ched to the manifold to achieve the same flow.
Item 2A - Page 83
Suggested Number of Lines to Reach Required Flow - Figure 1.0
Pipe Size Required Flow Rate 2 1/2" 4" 6" 8"
4" 390 GPM 1 - - -
6" 880 GPM 2 1 - -
8" 1,560 GPM 4 2 1 -
10" 2,440 GPM 6 3 1 -
12" 3,520 GPM 8 4 2 1
4. SAFETY IS THE CONTRACTORS RESPONSIBILITY . If unsafe conditions are observed, Fire Prevention staff will require that corrective measures are taken. If corrective measures are not sufficient , Fire Prevention staff will end the inspection.
5. All pipes and fittings shall be hydrostatically tested to 200 psi or 50 psi above system working pressure, whichever is greater (10.10.2.2.1) . System shall maintain pressure at +/- 5 psi for 2-hours. The trench should be backfilled before testing per NFPA 24 (10.10.2.2.4 and 10.10.2.2.5).
6. At the conclusion of hydrostati c testing, p ressure shall be relieved in the presence of Fire Prevention staff to verify proper movement of gauge needle.
7.4 OVERHEAD INSTALLATION.
ALL AREAS MUST BE VISIBLE . Contractor shall sche dule inspections before insulating, dry walling or installatio n of ceiling s occurs . Inspection shall review compliance with approved plans, spacing, hangers, seismic bracing, etc . All areas must remain visible for any corrections from this inspection. A REINSPECTION OF CORRECTIONS WILL BE REQUIRED.
All fire sprinklers utilizing CPVC pipe shall be required to have temporary test plugs installed at the time of rough-in inspections and hydrostatic testing. Sprinkler heads shall be installed only after all rough-in inspections and hydrostatic testing are completed satisfactorily.
The following is required prior to fire sprinkler final:
• Approved drawings and hydrostatic calculations available on site. • Water service to sprinkler riser shall be installed and live. • All HVAC registers shall be installed.
• All electrical shall be install ed for lights, ceiling fans and smoke detectors.
ALL CORRECTIONS FROM PREVIOUS INSPECTIONS MUST BE COMPLETED AND SIGNED OFF.
7.5 A complete approved set of fire sprinkler system and private fire service main plans stamped approved (wet stamp and si gnature) by the Fire Prevention Bureau shall Item 2A - Page 84
be kept on the job site at all times . INSPECTIONS WILL NOT BE CONDUCTED WITHOUT THE APPROVED PLANS.
7.6 The permit and inspection record card (Job Card) shall be available with the approved plans at the job site . INSPECTIONS WILL NOT BE CONDUCTED WITHOUT THE APPROPRIATE INSPECTION RECORD CARD (Job Card).
7.7 Approval as a result of an inspection shall not be construed to be an approval of a violation of the provisions of this code or of other ordinances of the jurisdic tion.
Inspections presuming to give authority to violate or cancel the provisions of this guideline or of other ordinances of the jurisdiction shall not be valid.
7.8 The following documents are required completed by the contractor and a copy shall be turned over to the fire department at the time of acceptance testing and final inspection:
(1) Underground Fire Service Mains (NFPA 24)
• Contractors Material and Test Certificate for Underground Piping (2) Fire Sprinkler Systems (NFPA 13 and 13R and 13D)
• Contractors Material and Test Certificate for Aboveground Piping (3) Standpipe and Hose Systems (NFPA 14)
• Contractors Material and Test Certificate for Aboveground Piping (4) Fire Pump Systems (NFPA 20)
• Contractors Material and Test Certificate for Fire Pump Systems (5) Fire Pump Systems (NFPA 20)
• Contractors Material and Test Certificate for Fire Pump Systems (6) Fire Alarm Systems (NFPA 72)
• Record of Completion
Item 2A - Page 85
8.0 EMERGENCY ACCESS AND GATES
General
8.1 This section has been develop ed to assist development applicants, architects, contractors, and building /business owners in determining the minimum requirements for Knox switches on powered access gates, Knox boxes for non - powered gates, Knox box vaults for residential and commercial facilities and minimum access gate requirements for fire depar tment access during emergency responses.
Plans
8.2 Plan submittals must identify all access gates and locations of Knox access switches and Knox boxes.
Gate Access Requirements
8.3 The installation of s ecurity gates across a fire apparatus access road shall be approved by the fire code official during the plan check review . Where security gates are installed, they shall have an approved means of emergency operation .
The security gates and the emergency operation shall be maintained at all times.
8.4 A Knox key operat ed switch sh all be installed at every automatic gate . Secured automated vehicle gates or entries shall utilize a combination of a Tomar Strobeswitch™, or approved equal, and an approved Knox ke y switch when required by the fire code official . Secured non-automated vehicle gates or entries shall utilize an approved padlock or chain (maximu m link or lock shackle size of a quarter (1/4) inch) when required by the fire code official.
8.5 Electric gate operators, where provided, shall be listed in accordance with UL 325.
Gates intended for automatic operation shall be designed, constructed and installed to comply with these requirements.
8.6 In the event of a power failure, the gates shall be defaulted or a utomatically transferred to a fail-safe mode allowing the gate to be pushed open without the use of special knowledge or any equipment . If a two-gate system is used, the override switch must open both gates.
8.7 Gate arms securing parking lots and parking structures shall be equipped with a fire department approved dual -keyed Knox key electric switch . When activated, the arm or arms shall open to allow fire and law enforcement access.
8.8 If there is no sensing device that will automatically open the gates for ex iting, a fire department approved Knox electrical override swi tch shall be placed on each side of the gate in an approved location.
8.9 Approved security gates shall be a minimum of fourteen (14) feet in unobstructed drive width on each side with gate in open position. An unobstructed vertical clearance of not less than thirteen (13) feet and six (6) inches shall be provided and maintained at all times.
Building Access Requirements
8.10 Where access to or within a structure or an area is restricted because of secur ed openings or where immediate access is necessary for emergen cy responder access, a Knox box vault will be required.
Item 2A - Page 86
8.11 Knox box locations shall be mounted at five (5) feet above grade. Show locations of Knox access controls on plan elevation views . Show r equirement in plan notes .
Contact the Fire Prevention Bureau by calling (760) 323 -8186 for a Knox Authorization Order Form.
8.12 The Knox key box shall be of an approved type and shall contain keys to gain necessary access as required by the fire code official.
8.13 Secured emergency access gates serving apartment, townhome o r condominiu m complex courtyard, must provide a Knox key box in addition to association or facility locks. The nominal height of Knox lock box installations shall be five (5) feet above grade.
Inspection Requirements
8.14 A final field inspection by the fire c ode official or an authorized representative is required before electronically controlled gates may become operative . Prior to final inspection, electronic gates shall remain in a locked-open position.
8.15 A final field inspection by the fire code official or an authorized representative for the installation of Knox box vaults with appropriate keys is required at time of final inspection.
9.0 FIRE APPARATUS ACCESS ROADS
General
9.1 This section has been de veloped to assist development applicants, architects, contractors, and bui lding/business owners in determining the minimum requirements for the design of fire apparatus access roads for consistency with the best practices of the fire code in the interest of public safety.
Plans
9.2 Detailed fire apparatus access roads sh all be submi tted to the fire department for review and approval prior to construction . Plans shall include certification from a Registered Professional Engineer stating the roads are of all -weather construction and capable of supporting fire apparatus weighing 73,000 lbs. G.V.W.
Requirements
9.3 Designated Fire Lanes: In private developments, designated fire lanes shall not be less than twenty-four (24) feet wide (curb face to curb face) with no pa rking on either side and shall be identified as fire lanes wit h red curb (s), stating in white lettering “NO PARKING FIRE LANE” , or by approved signage, or by both red curb(s) with white lettering and signage.
Reduced Roadway Width: Areas with reduced road way width (such as entry and exit gates, entry and exit approa ch roads, traffic calming areas, etc.) that are under thirty-six (36) feet wide require red painted curb(s) to maintain minimum twenty-four (24) foot clear width . Red curb(s), stating in white lettering “NO PARKING FIRE LANE”, or by approved signage, or b y both red c urb(s) with white lettering and signage.
Item 2A - Page 87
9.4 The grade of the fire apparatus access road shall be within the limits established by the fire code official based on the fire department’s a pparatus. No grade shall exceed 12%. Grade transitions shall not exceed maximum angle of approach and angle of departure based on the fire department’s apparatus as determined by the fire code official.
9.5 A secondary access road shall be provided for all d evelopments with thirty (30) or more dwelling units.
9.6 Dead-end fire apparat us access roads in excess of 150 feet in length shall be provided with approved provisions for the turning around of fire apparatus. The City of Palm Springs has two (2) approved turn around provisions. One is a cul -de-sac with an outside turning radius of forty-five (45) feet from centerline; and the other is a hammerhead turnaround meeting the Palm Springs Public Works and Engineering Department standard dated 8/3/2016.
9.7 Fire department access roads/driveways shall be provided so that no port ion of the exterior wall of the first floor of any building will be more than 150 feet from such roads.
9.8 When fences are installed that because the distance from an approved fire department access road to exceed the maximum distance allowed in Section 503 herein, a gate shall be provided in the fence to maintain the required fire department access. The gate shall be a minimum four (4) feet in width and be equipped with a Knox key box and/or Knox lock accessible from both sides in accordance with Section 506 herein.
9.9 Access to building openings and roofs . An approved walkway with a minimum width of forty-eight (48) inches shall be maintained readily accessible to all exterior openings for emergency access by the fire department.
9.10 High-Rise/Mid-Rise: High -rise and mid -rise buildings shall be accessible on a minimum of two (2) sides. Street access shall not be less than fifteen (15) feet or more than thirty (30) feet from the building. Landscaping or other obstructions shall not be placed or must be maintained around structures in a manner so as not to impair or impede accessibility for firefighting and rescue operations.
Construction Requirements
9.11 Access for firefighting equipment shall be provided to the immediate job site at the start of construction and maint ained until all construction is complete . Fire apparatus access roads shall have an unobst ructed width of not less than twenty- four (24) feet and an unobstructed vertical clearance of not less than thirteen (13) feet and six (6) inches.
Item 2A - Page 88
CITY COUNCIL STAFF REPORT
DATE: JANUARY 12, 2023, BUSINESS & LEGISLATIVE
SUBJECT: REVIEW AND MAKE APPOINTMENTS TO CITY COUNCIL
SUBCOMMITTEES, CITY REPRESENTATIVES TO PROJECTS,
LIAISONS TO CITY COMMISSIONS AND BOARDS, AND
REPRESENTATIVES TO EXTERNAL ORGANIZATION.
FROM: Teresa Gallavan, Interim City Manager
BY: Office of the City Clerk
SUMMARY:
On an annual basis the City Council traditionally reviews and makes appointments to the various City Council Subcommittees and representatives to outside organizations.
RECOMMENDATION:
Review and make appointments to the City Council Subcommittees, City Representatives to Projects, Liaisons to City Commissions and Boards, and Representatives to External Organizations. Adopt FPPC Form 806, authorize the City Clerk to prepare and execute FPPC Form 806 Public Official Appointments, and direct the City Clerk to post on the City’s website as required.
STAFF ANALYSIS:
The City Council routinely creates and appoints two- member ad hoc subcommittees to further study various topics to advise the City Council as a whole, or the City Manager.
Additionally, the City Council appoints liaisons to outside organizations and City Council liaisons to certain City Commissions and Boards as required and/or necessary for the circumstances.
Also, Pursuant to California Code of Regulations (CCR)§ 18702.5 before a public official may participate in a decision to vote to appoint themselves to a compensated position, the local agency must post a form established by the Fair Political Practices Commission (FPPC) on the City’s Website. Staff recommends the City Council adopt and direct that FPPC Form 806 be revised, prepared, filed and posted as required.
3A - 1
City Council Staff Report
January 12, 2023 -- Page 2
City Council Committees and Liaisons
REVIEWED BY:
Department Director: Brenda Pree
Interim City Manager: Teresa Gallvan
ATTACHMENTS:
A. Ranking List
3A - 2
ATTACHMENT A
3A - 3
Mayor - Garner MPT - Bernstein deHarte Holstege Middleton External Organizations Meetings Appointee Alternate Ranking Ranking Ranking Ranking Ranking Last Monday,
4:30 p.m.
2nd Thursday,
Noon
3 rd Wednesday,
10 a.m.
Public Safety 2 nd Monday, 9a.m. Garner Middleton 2 1 3 1 st Monday,
11 a.m.
1s t & 3 rd Friday,
12:30 p.m.
Coachella Valley
Conservation Commission
2 nd Thursday,
(SE/, Form 700 required) 10:30 a.m.
3rd Wednesday
8a.m.
Coachella Valley
Mountains Conservancy
Bd.
2 nd Monday,
(SE/, Form 700 required) 3 p.m.
Desert Community Energy 3rd Monday,
(SE/, Form 700 required) 2:30 p.m.
2 nd Thursday,
4 p.m.
Friends of PS Animal
Shelter
Varies Garner 1 3 2
Greater PS Convention &
Visitors Bureau
(SE/, Form 700 required)
League of California Cities
Annual Conference
Business Meeting
Main Street/Uptown
Business Association
1st Tuesday 8:30 a.m. Middleton 2 2 3
3rd Thursday,
8a.m.
Hotel General
Managers Weekly
Meeting
Wednesdays 8a.m.
PS Hospitality
Association Board
Meetings
2nd Thursday 11 a.m.
3rd Thursday
11:30 a.m.
PS Resorts Meetings Varies
Plaza Theater Restoration
Fundraising Committee
Varies Middleton N/A 1 3 3
Office of Neighborhood
Involvement
(One-PS)
Riverside County
Community Action Comm.
3rd Thursday,
(SE/, Form 700 required) 5:30 p.m.
Riverside County
Transportation
Commission
(SE/, Form 700 required)
2nd Wednesday, 9a.m. Middleton 3
1st Tuesday, 5:30 p.m. Middleton 1
Virata 3
Palm Springs Chamber of
Commerce
1 Palm Springs Tourism & Hospitality Organizations
Garner* MAYOR
PS Hospitality
Association Member
Varies Holstege 1
Garner Middleton 3
Middleton 1
Eastern Riverside County
Interoperable
Communications Authority
Middleton Holstege 3
Coachella Valley
Economic Partnership
Garner Middleton 3
Middleton 3
California Coalition of
Mayors
Garner* MAYOR N/A N/A
Middleton 3
Homelessness Holstege Garner 1
Transportation Middleton 3
1 N/A
Coachella Valley Association of Governments (CVAG): (SE/, Form 700 required) Executive
Committee
Garner* MAYOR
Bernstein
MAYOR PRO
TEM
N/A
Energy &
Environmental
Resources
Middleton 1
N/A N/A
4 1
3 N/A
4 3
2 4
4 1
4 1
3 4
4 2
2 4
1 N/A
1 N/A
1 1
*means was filled by previous CC Member - Now Vacant
11 1 2
N/A
4 3
1 N/A
4 3
3 1
3 2
1 3A - 4
So. California Association
of Governments
Conference & General
Assembly Meeting
(SE/, Form 700 reauired)
Sunline Transit Agency
(SE/, Form 700 required)
Finance R-12147 MAYOR MPT N/A N/A N/A N/A N/A
Public Integrity 2/21/2018 Middleton 3
Issue · N/A Liaison Liaison Ranking Ranking Ranking Ranking Ranking Affordable Housing &
Homelessness Holstege 1 1 1 4
Anti-Racism/Implicit Bias
Training Garner 1 3 3 4
Business Retention Holstege 1 2 1 2
Board & Commission
Program Review Garner 2 3 2
Cannabis Issues Garner 1 1 4
City Council Goal Setting Garner 1 1 3
City Manager Recruitment Middelton 2 1
City Properties -
Brokerage Listings Garner 3 3 2
Community Listening
Sessions Garner Holstege 1 3 1 4
Dream Hotel Milestone
Schedule Garner 3 4 3
Equity & Social Justice
Committee Garner Holstege 1 3 4 1 4
Fire Department Issues Middleton 1 2 2
FY 2022/23 Budget Middleton 3 3 2
New Library & Sunrise
Plaza Garner Holstege 1 3 1 3
Palm Canyon Street
Closure 4 3 2
Vacation Rentals Holstege 1 2 1 2
Selection of a Third-Party
Consultant to Review
Police Policies and
Practices
Garner 3 1 2
Board/Commission Member Member N/A Ranking Ranking Ranking Ranking Ranking Administrative Appeals
Board
Garner Bernstein 3 4 3
Airport Commission Garner Bernstein 1 3 1
Historic Site Preservation
Board
N/A N/A N/A N/A N/A N/A
Human Rights Commission Garner Bernstein 3 1 4
Library Board of Trustees Garner Bernstein 2 3 3
Measure "J" Oversight
Commission
N/A N/A N/A N/A N/A N/A
Parks and Recreation
Commission
Garner Bernstein 1 2 3
Planning Commission N/A N/A N/A N/A N/A N/A
Public Arts Commission Garner Bernstein 2 1 3
Rent Review Commission Garner Bernstein 3 4 4
Sustainability Commission Garner Bernstein 1 3 2
VillageFest Board Garner Bernstein 2 4 3
Created Member MemberStanding Committee Ranking
4th Wednesday, Noon Middleton 3
TBA Middleton 3
RankingRanking
3 3
2 1
Ranking
CITY COUNCIL
CITY COUNCIL
CITY COUNCIL
Roster of Board and Commission
Roster of City Council Liaisons
Ranking
3A - 5